command.h include was not set correctly

* Add EEPROM Reset keycode

* Add keycode to docs

* Move EEPROM Reset code to the end of the enum

* Cleanup and naming change

common_features.mk

@@ -213,6 +213,7 @@ endif
 ifeq ($(strip $(TERMINAL_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c
     OPT_DEFS += -DTERMINAL_ENABLE
+    OPT_DEFS += -DUSER_PRINT
 endif
 
 ifeq ($(strip $(USB_HID_ENABLE)), yes)

docs/feature_combo.md

@@ -44,15 +44,15 @@ For a more complicated implementation, you can use the `process_combo_event` fun
 ```c
 enum combo_events {
   ZC_COPY,
-  ZV_PASTE
+  XV_PASTE
   };
 
 const uint16_t PROGMEM copy_combo[] = {KC_Z, KC_C, COMBO_END};
-const uint16_t PROGMEM paste_combo[] = {KC_Z, KC_V, COMBO_END};
+const uint16_t PROGMEM paste_combo[] = {KC_X, KC_V, COMBO_END};
 
 combo_t key_combos[COMBO_COUNT] = {
   [ZC_COPY] = COMBO_ACTION(copy_combo),
-  [ZV_PASTE] = COMBO_ACTION(paste_combo),
+  [XV_PASTE] = COMBO_ACTION(paste_combo),
 };
 
 void process_combo_event(uint8_t combo_index, bool pressed) {
@@ -66,7 +66,7 @@ void process_combo_event(uint8_t combo_index, bool pressed) {
       }
       break;
 
-    case ZV_PASTE:
+    case XV_PASTE:
       if (pressed) {
         register_code(KC_LCTL);
         register_code(KC_V);
@@ -78,7 +78,7 @@ void process_combo_event(uint8_t combo_index, bool pressed) {
 }
 ```
 
-This will send Ctrl+C if you hit Z and C, and Ctrl+V if you hit Z and V.  But you could change this to do stuff like change layers, play sounds, or change settings.
+This will send Ctrl+C if you hit Z and C, and Ctrl+V if you hit X and V.  But you could change this to do stuff like change layers, play sounds, or change settings.
 
 ## Additional Configuration
 

docs/features.md

@@ -8,13 +8,17 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Auto Shift](feature_auto_shift.md) - Tap for the normal key, hold slightly longer for its shifted state.
 * [Backlight](feature_backlight.md) - LED lighting support for your keyboard.
 * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys.
+* [Combos](feature_combos.md) - Custom actions for multiple key holds.
+* [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic").
 * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
+* [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. 
 * [HD44780 LCD Display](feature_hd44780.md) - Support for LCD character displays using the HD44780 standard.
 * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state.
 * [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout.
 * [Leader Key](feature_leader_key.md) - Tap the leader key followed by a sequence to trigger custom behavior.
 * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key.
 * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard.
+* [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it.
 * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard.
 * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard.
 * [RGB Light](feature_rgblight.md) - RGB lighting for your keyboard.

docs/quantum_keycodes.md

@@ -8,15 +8,16 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are
 
 ## QMK Keycodes
 
-|Key          |Aliases    |Description                                                          |
-|-------------|-----------|---------------------------------------------------------------------|
-|`RESET`      |           |Put the keyboard into DFU mode for flashing                          |
-|`DEBUG`      |           |Toggle debug mode                                                    |
-|`KC_GESC`    |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
-|`KC_LSPO`    |           |Left Shift when held, `(` when tapped                                |
-|`KC_RSPC`    |           |Right Shift when held, `)` when tapped                               |
-|`KC_LEAD`    |           |The [Leader key](feature_leader_key.md)                              |
-|`KC_LOCK`    |           |The [Lock key](feature_key_lock.md)                                  |
-|`FUNC(n)`    |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
-|`M(n)`       |           |Call macro `n`                                                       |
-|`MACROTAP(n)`|           |Macro-tap `n` idk FIXME                                              |
+|Key            |Aliases    |Description                                                          |
+|---------------|-----------|---------------------------------------------------------------------|
+|`RESET`        |           |Put the keyboard into DFU mode for flashing                          |
+|`DEBUG`        |           |Toggle debug mode                                                    |
+|`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
+|`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
+|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
+|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
+|`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
+|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
+|`M(n)`         |           |Call macro `n`                                                       |
+|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |

keyboards/qwertyydox/rules.mk

@@ -1,69 +1,69 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
-SUBPROJECT_rev1 = yes
-USE_I2C = yes               # I2C is used between the sides
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-SPLIT_KEYBOARD = yes
-
-DEFAULT_FOLDER = qwertyydox/rev1
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.
+SUBPROJECT_rev1 = yes
+USE_I2C = yes               # I2C is used between the sides
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+SPLIT_KEYBOARD = yes
+
+DEFAULT_FOLDER = qwertyydox/rev1

layouts/community/ergodox/drashna/keymap.c

@@ -40,7 +40,7 @@ bool skip_leds = false;
       KC_TAB,  K01,    K02,     K03,      K04,     K05,     TG(_DIABLO),         TG(_DIABLO), K06,     K07,     K08,     K09,     K0A,     KC_BSLS, \
       KC_C1R3, K11,    K12,     K13,      K14,     K15,                                       K16,     K17,     K18,     K19,     K1A,     KC_QUOT, \
       KC_MLSF, CTL_T(K21), K22, K23,      K24,     K25,     TG(_GAMEPAD),       TG(_GAMEPAD), K26,     K27,     K28,     K29,  CTL_T(K2A), KC_MRSF, \
-      KC_GRV,  OSM(MOD_MEH),OSM(MOD_LGUI),KC_LBRC, KC_RBRC,                                            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, UC_IRNY, \
+      KC_GRV,  OSM(MOD_MEH),OSM(MOD_LGUI),KC_LBRC, KC_RBRC,                                            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, UC_SHRG, \
                                                   OS_LALT, OS_LGUI,                 OS_RGUI, CTL_T(KC_ESCAPE), \
                                                            KC_HOME,                 KC_PGUP, \
                              LT(_LOWER, KC_SPACE),KC_BSPC, KC_END,                  KC_PGDN, KC_DEL,  LT(_RAISE, KC_ENTER)                          \

layouts/community/ortho_4x12/drashna/config.h

@@ -18,7 +18,7 @@
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
 // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
 // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
 // #define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1
 // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 // #define EECONFIG_RGB_MATRIX (uint32_t *)16

layouts/community/ortho_4x12/drashna/keymap.c

@@ -17,6 +17,10 @@
 #include QMK_KEYBOARD_H
 #include "drashna.h"
 
+#ifdef RGB_MATRIX_ENABLE
+extern bool g_suspend_state;
+#endif
+
 #ifdef BACKLIGHT_ENABLE
 enum planck_keycodes {
   BACKLIT = NEW_SAFE_RANGE,
@@ -135,6 +139,15 @@ bool music_mask_user(uint16_t keycode) {
 
 #ifdef RGB_MATRIX_ENABLE
 
+void suspend_power_down_keymap(void)
+{
+    rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_keymap(void)
+{
+    rgb_matrix_set_suspend_state(false);
+}
 
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
   rgb_led led;
@@ -152,25 +165,26 @@ void rgb_matrix_indicators_user(void) {
   uint8_t this_mod = get_mods();
   uint8_t this_led = host_keyboard_leds();
   uint8_t this_osm = get_oneshot_mods();
-
-  switch (biton32(layer_state)) {
-    case _RAISE:
-      rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break;
-    case _LOWER:
-      rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break;
-    case _ADJUST:
-      rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break;
-    default:
-      switch (biton32(default_layer_state)) {
-        case _QWERTY:
-          rgb_matrix_layer_helper(0x00, 0xFF, 0xFF, true); break;
-        case _COLEMAK:
-          rgb_matrix_layer_helper(0xFF, 0x00, 0xFF, true); break;
-        case _DVORAK:
-          rgb_matrix_layer_helper(0x00, 0xFF, 0x00, true); break;
-        case _WORKMAN:
-          rgb_matrix_layer_helper(0xD9, 0xA5, 0x21, true); break;
-      }
+  if (!g_suspend_state) {
+    switch (biton32(layer_state)) {
+      case _RAISE:
+        rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break;
+      case _LOWER:
+        rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break;
+      case _ADJUST:
+        rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break;
+      default:
+        switch (biton32(default_layer_state)) {
+          case _QWERTY:
+            rgb_matrix_layer_helper(0x00, 0xFF, 0xFF, true); break;
+          case _COLEMAK:
+            rgb_matrix_layer_helper(0xFF, 0x00, 0xFF, true); break;
+          case _DVORAK:
+            rgb_matrix_layer_helper(0x00, 0xFF, 0x00, true); break;
+          case _WORKMAN:
+            rgb_matrix_layer_helper(0xD9, 0xA5, 0x21, true); break;
+        }
+    }
   }
 
   switch (biton32(default_layer_state)) {

quantum/quantum.c

@@ -298,6 +298,11 @@ bool process_record_quantum(keyrecord_t *record) {
           print("DEBUG: enabled.\n");
       }
     return false;
+    case EEPROM_RESET:
+      if (record->event.pressed) {
+          eeconfig_init();
+      }
+    return false;
   #ifdef FAUXCLICKY_ENABLE
   case FC_TOG:
     if (record->event.pressed) {

quantum/quantum_keycodes.h

@@ -454,6 +454,8 @@ enum quantum_keycodes {
     TERM_OFF,
 #endif
 
+    EEPROM_RESET,
+
     // always leave at the end
     SAFE_RANGE
 };
@@ -569,6 +571,8 @@ enum quantum_keycodes {
 
 #define KC_GESC GRAVE_ESC
 
+#define EEP_RST EEPROM_RESET
+
 #define CK_TOGG CLICKY_TOGGLE
 #define CK_RST CLICKY_RESET
 #define CK_UP CLICKY_UP

tmk_core/common.mk

@@ -43,9 +43,11 @@ ifeq ($(PLATFORM),CHIBIOS)
     TMK_COMMON_DEFS += -DSTM32_EEPROM_ENABLE
   else
     TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
-endif
+  endif
   ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
     TMK_COMMON_SRC += $(CHIBIOS)/os/various/syscalls.c
+  else ifeq($(strip $(TERMINAL_ENABLE)), yes)
+    TMK_COMMON_SRC += $(CHIBIOS)/os/various/syscalls.c
   endif
 endif
 

tmk_core/common/command.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef COMMAND_H
-#define COMMAND
+#pragma once
 
 /* FIXME: Add doxygen comments for the behavioral defines in here. */
 
@@ -155,5 +154,3 @@ bool command_proc(uint8_t code);
 
 #define XMAGIC_KC(key) KC_##key
 #define MAGIC_KC(key) XMAGIC_KC(key)
-
-#endif

tmk_core/common/print.h

@@ -73,7 +73,9 @@ void print_set_sendchar(int8_t (*print_sendchar_func)(uint8_t));
 
 #elif defined(PROTOCOL_CHIBIOS) /* PROTOCOL_CHIBIOS */
 
+#ifndef TERMINAL_ENABLE
 #  include "chibios/printf.h"
+#endif
 
 #  ifdef USER_PRINT /* USER_PRINT */
 

users/drashna/.gitlab-ci.yml

@@ -0,0 +1,26 @@
+stages:
+  - build
+
+qmk_firmware:
+  stage: build
+  variables:
+    GIT_SUBMODULE_STRATEGY: recursive
+  tags:
+    - linux
+  image: ubuntu
+  before_script:
+    - apt-get update -qy
+    - apt-get install -y build-essential avr-libc binutils-arm-none-eabi binutils-avr dfu-programmer dfu-util diffutils gcc gcc-arm-none-eabi gcc-avr git libnewlib-arm-none-eabi unzip wget zip
+    - avr-gcc --version
+  script:
+    - make iris/rev2:drashna iris/rev2:drashna_old ergodox_ez:drashna viterbi/rev1:drashna orthodox/rev1:drashna orthodox/rev3:drashna crkbd:drashna planck/light:drashna
+  artifacts:
+    name: "$CI_JOB_NAME-$CI_COMMIT_REF_SLUG"
+    paths:
+      - ./*.hex
+      - ./*.bin
+  only:
+    - master
+    - drashna_keymaps
+    - merge-requests
+    - branches

users/drashna/config.h

@@ -44,8 +44,8 @@
 // and when this option isn't enabled, z rapidly followed by x
 // actually sends Ctrl-x. That's bad.)
 #define IGNORE_MOD_TAP_INTERRUPT
-#undef  PERMISSIVE_HOLD
-// #define TAPPING_FORCE_HOLD
+#define PERMISSIVE_HOLD
+//#define TAPPING_FORCE_HOLD
 //#define RETRO_TAPPING
 
 #define FORCE_NKRO

users/drashna/drashna.c

@@ -20,6 +20,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "rgb_stuff.h"
 
 userspace_config_t userspace_config;
+#if (defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE))
+  #define DRASHNA_UNICODE_MODE UC_WIN
+#else
+  // set to 2 for UC_WIN, set to 4 for UC_WINC
+  #define DRASHNA_UNICODE_MODE 2
+#endif
 
 uint16_t copy_paste_timer;
 //  Helper Functions
@@ -154,19 +160,18 @@ void matrix_init_user(void) {
 
   userspace_config.raw = eeconfig_read_user();
 
-#ifdef BOOTLOADER_CATERINA
-  DDRD &= ~(1<<5);
-  PORTD &= ~(1<<5);
+  #ifdef BOOTLOADER_CATERINA
+    DDRD &= ~(1<<5);
+    PORTD &= ~(1<<5);
 
-  DDRB &= ~(1<<0);
-  PORTB &= ~(1<<0);
-#endif
+    DDRB &= ~(1<<0);
+    PORTB &= ~(1<<0);
+  #endif
 
-#if (defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE))
-  if (eeprom_read_byte(EECONFIG_UNICODEMODE) != UC_WIN) {
-    set_unicode_input_mode(UC_WIN);
-  }
-#endif //UNICODE_ENABLE
+  #if (defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE))
+    set_unicode_input_mode(DRASHNA_UNICODE_MODE);
+    get_unicode_input_mode();
+  #endif //UNICODE_ENABLE
   matrix_init_keymap();
 }
 
@@ -266,9 +271,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   case KC_MAKE:  // Compiles the firmware, and adds the flash command based on keyboard bootloader
     if (!record->event.pressed) {
       uint8_t temp_mod = get_mods();
-      clear_mods();
+      uint8_t temp_osm = get_oneshot_mods();
+      clear_mods(); clear_oneshot_mods();
       send_string_with_delay_P(PSTR("make " QMK_KEYBOARD ":" QMK_KEYMAP), 10);
-      if (temp_mod & MODS_SHIFT_MASK) {
+      if (temp_mod & MODS_SHIFT_MASK || temp_osm & MODS_SHIFT_MASK) {
         #if defined(__ARM__)
           send_string_with_delay_P(PSTR(":dfu-util"), 10);
         #elif defined(BOOTLOADER_DFU)
@@ -282,7 +288,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       #if defined(KEYBOARD_viterbi)
         send_string_with_delay_P(PSTR(":dfu"), 10);
       #endif
-      if (temp_mod & MODS_CTRL_MASK) { send_string_with_delay_P(PSTR(" -j8 --output-sync"), 10); }
+      if (temp_mod & MODS_CTRL_MASK || temp_osm & MODS_CTRL_MASK) { send_string_with_delay_P(PSTR(" -j8 --output-sync"), 10); }
       send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), 10);
       set_mods(temp_mod);
     }
@@ -422,4 +428,10 @@ void eeconfig_init_user(void) {
   userspace_config.raw = 0;
   userspace_config.rgb_layer_change = true;
   eeconfig_update_user(userspace_config.raw);
+  #if (defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE))
+    set_unicode_input_mode(DRASHNA_UNICODE_MODE);
+    get_unicode_input_mode();
+  #else
+    eeprom_update_byte(EECONFIG_UNICODEMODE, DRASHNA_UNICODE_MODE);
+  #endif
 }

users/drashna/rgb_stuff.c

@@ -12,14 +12,6 @@ void rgblight_sethsv_default_helper(uint8_t index) {
 #endif // RGBLIGHT_ENABLE
 
 #ifdef INDICATOR_LIGHTS
-uint8_t last_mod;
-uint8_t last_led;
-uint8_t last_osm;
-uint8_t current_mod;
-uint8_t current_led;
-uint8_t current_osm;
-
-
 void set_rgb_indicators(uint8_t this_mod, uint8_t this_led, uint8_t this_osm) {
   if (userspace_config.rgb_layer_change && biton32(layer_state) == 0) {
     if (this_mod & MODS_SHIFT_MASK || this_led & (1<<USB_LED_CAPS_LOCK) || this_osm & MODS_SHIFT_MASK) {
@@ -86,16 +78,7 @@ void set_rgb_indicators(uint8_t this_mod, uint8_t this_led, uint8_t this_osm) {
 }
 
 void matrix_scan_indicator(void) {
-  current_mod = get_mods();
-  current_led = host_keyboard_leds();
-  current_osm = get_oneshot_mods();
-
-  set_rgb_indicators(current_mod, current_led, current_osm);
-
-  last_mod = current_mod;
-  last_led = current_led;
-  last_osm = current_osm;
-
+  set_rgb_indicators(get_mods(), host_keyboard_leds(), get_oneshot_mods());
 }
 #endif //INDICATOR_LIGHTS
 
@@ -255,13 +238,9 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
 
 
 void matrix_init_rgb(void) {
-#ifdef INDICATOR_LIGHTS
-  current_mod = last_mod = get_mods();
-  current_led = last_led = host_keyboard_leds();
-  current_osm = last_osm = get_oneshot_mods();
-#endif
 
   if (userspace_config.rgb_layer_change) {
+    rgblight_init();
     rgblight_enable_noeeprom();
     switch (biton32(eeconfig_read_default_layer())) {
       case _COLEMAK:
@@ -291,6 +270,7 @@ void matrix_scan_rgb(void) {
 
 uint32_t layer_state_set_rgb(uint32_t state) {
 #ifdef RGBLIGHT_ENABLE
+  static bool has_ran;
   if (userspace_config.rgb_layer_change) {
     switch (biton32(state)) {
     case _MACROS:
@@ -332,7 +312,12 @@ uint32_t layer_state_set_rgb(uint32_t state) {
         default:
           rgblight_sethsv_noeeprom_cyan(); break;
       }
-      biton32(state) == _MODS ? rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING) : rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
+      if (has_ran) {
+        biton32(state) == _MODS ? rgblight_mode(RGBLIGHT_MODE_BREATHING) : rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
+      } else {
+        biton32(state) == _MODS ? rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING) : rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
+        has_ran = true;
+      }
       break;
     }
 //    layer_state_set_indicator(); // Runs every scan, so need to call this here .... since I can't get it working "right" anyhow
@@ -341,5 +326,3 @@ uint32_t layer_state_set_rgb(uint32_t state) {
 
   return state;
 }
-
-