Merge branch 'master' into planck_thk

Co-Authored-By: jackhumbert <jack.humb@gmail.com>

bin/qmk

@@ -38,7 +38,7 @@ with open('requirements.txt', 'r') as fd:
 
 # Figure out our version
 command = ['git', 'describe', '--abbrev=6', '--dirty', '--always', '--tags']
-result = subprocess.run(command, universal_newlines=True, capture_output=True)
+result = subprocess.run(command, text=True, capture_output=True)
 
 if result.returncode == 0:
     os.environ['QMK_VERSION'] = 'QMK ' + result.stdout.strip()

docs/config_options.md

@@ -76,7 +76,7 @@ This is a C header file that is one of the first things included, and will persi
 * `#define B7_AUDIO`
   * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define BACKLIGHT_PIN B7`
-  * pin of the backlight
+  * pin of the backlight - `B5`, `B6`, `B7` and `C6` (and `D4` on ATmega32A) use hardware PWM, others use software implementation
 * `#define BACKLIGHT_LEVELS 3`
   * number of levels your backlight will have (maximum 15 excluding off)
 * `#define BACKLIGHT_BREATHING`
@@ -248,9 +248,6 @@ There are a few different ways to set handedness for split keyboards (listed in
 * `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
   * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.
 
-* `#define DIRECT_PINS_RIGHT { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }`
-  * If you want to specify a different direct pinout for the right half than the left half, you can define `DIRECT_PINS_RIGHT`. Currently, the size of `DIRECT_PINS` must be the same as `DIRECT_PINS_RIGHT`.
-
 * `#define RGBLED_SPLIT { 6, 6 }`
   * See [RGB Light Configuration](#rgb-light-configuration)
 

docs/faq_build.md

@@ -19,11 +19,7 @@ Note that running `make` with `sudo` is generally ***not*** a good idea, and you
 
 ### Linux `udev` Rules
 On Linux, you'll need proper privileges to access the MCU. You can either use
-`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following:
-```console
-sudo udevadm control --reload-rules
-sudo udevadm trigger
-```
+`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
 
 **/etc/udev/rules.d/50-atmel-dfu.rules:**
 ```
@@ -47,28 +43,6 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
 ```
 
-**/etc/udev/rules.d/55-catalina.rules:**
-```
-# ModemManager should ignore the following devices
-ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"
-```
-
-**Note:** ModemManager filtering only works when not in strict mode, the following commands can update that settings:
-```console
-sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service
-sudo systemctl daemon-reload
-sudo systemctl restart ModemManager
-```
-
-**/etc/udev/rules.d/56-dfu-util.rules:**
-```
-# stm32duino
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", MODE:="0666"
-# Generic stm32
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"
-```
-
 ### Serial device is not detected in bootloader mode on Linux
 Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
 Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.

docs/feature_backlight.md

@@ -30,31 +30,32 @@ You should then be able to use the keycodes below to change the backlight level.
 
 This feature is distinct from both the [RGB underglow](feature_rgblight.md) and [RGB matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously use multiple different coloured LEDs on a keyboard.
 
+Hardware PWM is only supported on certain pins of the MCU, so if the backlighting is not connected to one of them, a software PWM implementation triggered by hardware timer interrupts will be used.
+
 Hardware PWM is supported according to the following table:
 
-|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|
-|-------------|-------------|-------------|-------------|---------|
-|`B5`         |Timer 1      |Timer 1      |             |         |
-|`B6`         |Timer 1      |Timer 1      |             |         |
-|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |
-|`C4`         |Timer 3      |             |             |         |
-|`C5`         |Timer 3      |             |Timer 1      |         |
-|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |
-|`D4`         |             |             |             |Timer 1  |
-|`D5`         |             |             |             |Timer 1  |
+| Backlight Pin | Hardware timer          |
+|---------------|-------------------------|
+|`B5`           | Timer 1                 |
+|`B6`           | Timer 1                 |
+|`B7`           | Timer 1                 |
+|`C6`           | Timer 3                 |
+|`D4`           | Timer 1 (ATmega32A only)|
+| other         | Software PWM            |
 
-All other pins will use software PWM. If the [Audio](feature_audio.md) feature is disabled or only using one timer, the backlight PWM can be triggered by a hardware timer:
+The [audio feature](feature_audio.md) also uses hardware timers. Please refer to the following table to know what hardware timer the software PWM will use depending on the audio configuration:
 
-|Audio Pin|Audio Timer|Software PWM Timer|
-|---------|-----------|------------------|
-|`C4`     |Timer 3    |Timer 1           |
-|`C5`     |Timer 3    |Timer 1           |
-|`C6`     |Timer 3    |Timer 1           |
-|`B5`     |Timer 1    |Timer 3           |
-|`B6`     |Timer 1    |Timer 3           |
-|`B7`     |Timer 1    |Timer 3           |
+| Audio Pin(s) | Audio Timer | Software PWM Timer |
+|--------------|-------------|--------------------|
+| `C4`         | Timer 3     | Timer 1            |
+| `C5`         | Timer 3     | Timer 1            |
+| `C6`         | Timer 3     | Timer 1            |
+| `B5`         | Timer 1     | Timer 3            |
+| `B6`         | Timer 1     | Timer 3            |
+| `B7`         | Timer 1     | Timer 3            |
+| `Bx` & `Cx`  | Timer 1 & 3 | None               |
 
-When both timers are in use for Audio, the backlight PWM will not use a hardware timer, but will instead be triggered during the matrix scan. In this case, breathing is not supported, and the backlight might flicker, because the PWM computation may not be called with enough timing precision.
+When all timers are in use for [audio](feature_audio.md), the backlight software PWM will not use a hardware timer, but instead will be triggered during the matrix scan. In this case the backlight doesn't support breathing and might show lighting artifacts (for instance flickering), because the PWM computation might not be called with enough timing precision.
 
 ## Configuration
 

docs/feature_combo.md

@@ -2,7 +2,7 @@
 
 The Combo feature is a chording type solution for adding custom actions.  It lets you hit multiple keys at once and produce a different effect.  For instance, hitting `A` and `S` within the tapping term would hit `ESC` instead, or have it perform even more complex tasks.
 
-To enable this feature, you need to add `COMBO_ENABLE = yes` to your `rules.mk`.
+To enable this feature, yu need to add `COMBO_ENABLE = yes` to your `rules.mk`.
 
 Additionally, in your `config.h`, you'll need to specify the number of combos that you'll be using, by adding `#define COMBO_COUNT 1` (replacing 1 with the number that you're using).
 <!-- At this time, this is necessary -->

docs/feature_encoders.md

@@ -48,4 +48,4 @@ or `keymap.c`:
 
 ## Hardware
 
-The A an B lines of the encoders should be wired directly to the MCU, and the C/common lines should be wired to ground.
+The A and B lines of the encoders should be wired directly to the MCU, and the C/common lines should be wired to ground.

docs/feature_split_keyboard.md

@@ -160,11 +160,6 @@ There are some settings that you may need to configure, based on how the hardwar
 
 This allows you to specify a different set of pins for the matrix on the right side.  This is useful if you have a board with differently-shaped halves that requires a different configuration (such as Keebio's Quefrency).
 
-```c
-#define DIRECT_PINS_RIGHT { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }
-```
-
-This allows you to specify a different set of direct pins for the right side.
 
 ```c
 #define RGBLIGHT_SPLIT

docs/getting_started_make_guide.md

@@ -83,7 +83,7 @@ This allows the keyboard to tell the host OS that up to 248 keys are held down a
 
 `BACKLIGHT_ENABLE`
 
-This enables the in-switch LED backlighting. You can specify the backlight pin by putting this in your `config.h`:
+This enables your backlight on Timer1 and ports B5, B6, or B7 (for now). You can specify your port by putting this in your `config.h`:
 
     #define BACKLIGHT_PIN B7
 

docs/hardware_avr.md

@@ -125,7 +125,7 @@ To configure a keyboard where each switch is connected to a separate pin and gro
 
 ### Backlight Configuration
 
-QMK supports backlighting on most GPIO pins. A select few of these can be driven by the MCU in hardware. For more details see the [Backlight Documentation](feature_backlight.md).
+By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md).
 
 ```c
 #define BACKLIGHT_PIN B7
@@ -134,6 +134,8 @@ QMK supports backlighting on most GPIO pins. A select few of these can be driven
 #define BREATHING_PERIOD 6
 ```
 
+?> You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
+
 ### Other Configuration Options
 
 There are a lot of features that can be configured or tuned in `config.h`. You should see the [Config Options](config_options.md) page for more details.

docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md

@@ -34,7 +34,7 @@ For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the
 
 To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.
 
-`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to.
+`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported.
 
 `BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap.
 

keyboards/ai03/lunar/keymaps/muzfuz/keymap.c

@@ -1,52 +0,0 @@
-#include QMK_KEYBOARD_H
-
-// Helpful defines
-#define ESC_CTL     CTL_T(KC_ESCAPE)            // Tap for Esc, hold for Ctrl
-#define FL_KCF LT(1,KC_F)
-#define FL_KCJ LT(1,KC_J)
-#define CMD_ENT LGUI(LSFT(KC_ENT))
-
-enum custom_keycodes {
-  HASHRKT = SAFE_RANGE,
-  CLNEQLS,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT( /* Base */
-		KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_BSLS, LGUI(KC_C),
-		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, LGUI(KC_V),
-		ESC_CTL,          KC_A,    KC_S,    KC_D,    FL_KCF,  KC_G,    KC_H,    FL_KCJ,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
-		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_PGDN,
-		CMD_ENT, KC_LALT, KC_LGUI,          KC_SPC,           KC_SPC,           KC_SPC,                    MO(2),   KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
-	),
-	[1] = LAYOUT( /* FL */
-		KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  KC_VOLU,
-		_______,          HASHRKT, _______, KC_LCBR, KC_RCBR, _______, _______, KC_UNDS, KC_PLUS, KC_PIPE,  _______, _______, _______, _______, KC_VOLD,
-		_______,          CLNEQLS, _______, KC_LBRC, KC_RBRC, _______, _______, KC_MINS, KC_EQL,  KC_BSLS,  KC_TILD, KC_GRV,           _______, KC_HOME,
-		_______,          _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______,          _______, KC_END,
-		_______, _______, _______,          _______,          _______,          _______,                    _______, _______, _______, _______, _______
-	),
-	[2] = LAYOUT( /* FN */
-		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  _______,
-		KC_CAPS,          _______, KC_UP,   _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,
-		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4,   KC_P5,   KC_P6,   _______, _______,          _______, _______,
-		_______,          KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0,   KC_P1,   KC_P2,   KC_P3,   _______, _______,          KC_PGUP, _______,
-		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
-	)
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch(keycode) {
-    case HASHRKT:
-      if (record->event.pressed) {
-        SEND_STRING("=>");
-      }
-      break;
-    case CLNEQLS:
-      if (record->event.pressed) {
-        SEND_STRING(":=");
-      }
-      break;
-  }
-  return true;
-}

keyboards/ai03/lunar/keymaps/muzfuz/readme.md

@@ -1,5 +0,0 @@
-# muzfuz's keymap for Lunar
-
-```shell
-make ai03/lunar:muzfuz:dfu
-```

keyboards/alice/config.h

@@ -36,3 +36,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
+#define BOOTLOADHID_BOOTLOADER 1

keyboards/alice/readme.md

@@ -0,0 +1,60 @@
+# TGR Alice
+
+![TGR Alice](https://i.imgur.com/cJohEqS.jpg)
+
+An ergonomic 60% keyboard.
+
+Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury)  
+Hardware Supported: TGR Alice  
+Hardware Availability: Group buy finished  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alice:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
+
+ps2avrGB keyboard firmware
+==========================
+
+This keyboard uses the port of the QMK firmware for boards that are based on the
+ps2avrGB firmware.
+
+Note that this is a complete replacement for the firmware, so you won't be
+using Bootmapper Client to change any keyboard settings, since not all the
+USB report options are supported.
+
+## Installing
+
+First, install the requirements. These commands are for OSX, but all you
+need is the AVR toolchain and `bootloadHID` for flashing:
+
+```
+$ brew cask install crosspack-avr
+$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+$ pip install pyusb
+```
+
+Then, with the keyboard plugged in, simply run this command from the
+`qmk_firmware` directory:
+
+```
+$ make alice
+$ bootloadHID -r alice_default.hex
+```
+
+## Setting the board to bootloader mode
+
+Hold the ESC key (the one before the 1! key, in case you remaped it).
+
+## Troubleshooting
+
+From my experience, it's really hard to brick these boards. But these
+tricks have been useful when it got stuck in a weird scenario.
+
+1. Try plugging the board in while holding the bootloader key. This will force
+   it to boot only the bootloader without loading the firmware. Once this is
+   done, just reflash the board with the original firmware.
+2. Sometimes USB hubs can act weird, so try connecting the board directly
+   to your computer or plugging/unplugging the USB hub.

keyboards/butterstick/keymaps/default/keymap.c

@@ -45,21 +45,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 uint32_t processQwerty(bool lookup) {
     // SECRET AGENT CHORDS
     P( LSU | LK | RS | RD,    	SEND_STRING(VERSION); SEND_STRING(__DATE__));
-		P( LR  | ST2| RR | RB, 		SEND(KC_BSPC));
+	P( LR  | ST2| RR | RB, 		SEND(KC_BSPC));
     P( LSD | RZ,   			 	SEND(KC_SPC));
 
     // Dual chords
     P( LP  | LH,    			CLICK_MOUSE(KC_MS_BTN2));
     P( ST1 | RF,    			CLICK_MOUSE(KC_MS_BTN1));
-    P( LSU | LFT,         SEND(KC_ESC));
-		P( LSD | LK,					SEND(KC_LSFT));
-		P( RZ  | RS,					SEND(KC_LSFT));
-		P( ST2 | RR,					SEND(KC_SPC));
+    P( LSU | LFT,               SEND(KC_ESC));
+	P( LSD | LK,				SEND(KC_LSFT));
+	P( RZ  | RS,				SEND(KC_LSFT));
+	P( ST2 | RR,				SEND(KC_SPC));
     P( RP  | RL,    			SEND(KC_LGUI));
     P( RT  | RD,    			SEND(KC_LCTL));
     P( RL  | RT,    			SEND(KC_LALT));
-		P( LSU | LSD | LFT | LK,	SEND(KC_LCTL));
-		P( RS  | RT  | RD  | RZ,	SEND(KC_ENT));
+	P( LSU | LSD | LFT | LK,	SEND(KC_LCTL));
+	P( RS  | RT  | RD  | RZ,	SEND(KC_ENT));
 
     // Function Layer
     P( FUNCT | RF,         SEND(KC_F1));
@@ -179,5 +179,6 @@ uint32_t processQwerty(bool lookup) {
     return 0;
 }
 
+
 // Don't fuck with this, thanks.
 size_t keymapsCount  = sizeof(keymaps)/sizeof(keymaps[0]);

keyboards/butterstick/sten.c

@@ -11,18 +11,6 @@ uint32_t pChord 		= 0;		// Previous Chord
 int		 pChordIndex 	= 0;		// Keys in previousachord
 uint32_t pChordState[32];			// Previous chord sate 
 uint32_t stickyBits = 0;			// Or'd with every incoming press
-#ifndef NO_DEBUG
-char debugMsg[32];
-#endif
-
-// StenoLayer
-uint32_t releasedChord	= 0;		// Keys released from current chord
-uint32_t tChord			= 0;		// Protects state of cChord
-
-#ifndef STENOLAYERS
-uint32_t stenoLayers[] = { PWR };
-size_t 	 stenoLayerCount = sizeof(stenoLayers)/sizeof(stenoLayers[0]);
-#endif
 
 // Mode state
 enum MODE { STENO = 0, QWERTY, COMMAND };
@@ -51,6 +39,7 @@ bool	inMouse 		= false;
 int8_t	mousePress;
 
 // All processing done at chordUp goes through here
+// Note, this is a gutted version of the Georgi sten.h
 bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) { 
 	// Check for mousekeys, this is release
 #ifdef MOUSEKEY_ENABLE
@@ -61,21 +50,8 @@ bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) {
 	}
 #endif
 
-	// Toggle Serial/QWERTY steno
-	if (cChord == (PWR | FN | ST1 | ST2)) {
-#ifndef NO_DEBUG
-		uprintf("Fallback Toggle\n");
-#endif
-		QWERSTENO = !QWERSTENO;
-		
-		goto out;
-	}
-
 	// handle command mode
-	if (cChord == (PWR | FN | RD | RZ)) {
-#ifndef NO_DEBUG
-		uprintf("COMMAND Toggle\n");
-#endif
+	if (cChord == (LSU | LSD | RD | RZ)) {
 		if (cMode != COMMAND) {   // Entering Command Mode
 			CMDLEN = 0;
 			pMode = cMode;
@@ -94,7 +70,7 @@ bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) {
 	}
 
 	// Handle Gaming Toggle,
-	if (cChord == (PWR | FN | ST4 | ST3) && keymapsCount > 1) {
+	if (cChord == (LSU | LSD | LFT | LK | RT | RS | RD | RZ) && keymapsCount > 1) {
 #ifndef NO_DEBUG
 		uprintf("Switching to QMK\n");
 #endif
@@ -102,38 +78,11 @@ bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) {
 		goto out;
 	}
 
-	// Lone FN press, toggle QWERTY
-#ifndef ONLYQWERTY
-	if (cChord == FN) {
-		(cMode == STENO) ? (cMode = QWERTY) : (cMode = STENO);
-		goto out;
-	}
-#endif
-
-	// Check for Plover momentary
-	if (cMode == QWERTY && (cChord & FN)) {
-		cChord ^= FN;
-		goto steno;
-	}
-
 	// Do QWERTY and Momentary QWERTY
-	if (cMode == QWERTY || (cMode == COMMAND) || (cChord & (FN | PWR))) {
+	if (cMode == QWERTY || (cMode == COMMAND)) {
 		processChord(false);
 		goto out;
-	}
-
-	// Fallback NKRO Steno
-	if (cMode == STENO && QWERSTENO) {
-		processChord(true);
-		goto out;
-	}
-
-steno:
-	// Hey that's a steno chord!
-	inChord = false;
-	chordIndex = 0;
-	cChord = 0;
-	return true; 
+	} 
 
 out:
 	cChord = 0;

keyboards/butterstick/sten.h

@@ -13,14 +13,11 @@
 
 extern size_t keymapsCount;			// Total keymaps
 extern uint32_t cChord;				// Current Chord
-extern uint32_t stenoLayers[];		// Chords that simulate QMK layers
-extern size_t stenoLayerCount;		// Number of simulated layers
-uint32_t refChord;					// Reference chord for PC macro
 
 // Function defs
 void 			processChord(bool useFakeSteno);
-uint32_t	processQwerty(bool lookup);
-uint32_t 	processFakeSteno(bool lookup);
+uint32_t		processQwerty(bool lookup);
+uint32_t 		processFakeSteno(bool lookup);
 void 			saveState(uint32_t cChord);
 void 			restoreState(void);
 
@@ -33,11 +30,6 @@ void 			CLICK_MOUSE(uint8_t);
 
 // Keymap helper
 #define P(chord, act) if (cChord == (chord)) { if (!lookup) {act;} return chord;}
-#define PC(chord, act) if (cChord == (chord)) { if (!lookup) {act;} return chord;} \
-	for(int i = 0; i < stenoLayerCount; i++) { \
-		refChord = stenoLayers[i] | chord; \
-		if (cChord == (refChord)) { if (!lookup) {act;} return refChord;}; \
-}
 
 // Shift to internal representation
 // i.e) S(teno)R(ight)F

keyboards/ckeys/readme.md

@@ -1,11 +1,10 @@
 # cKeys.org
 
-[cKeys](https://ckeys.org/) is an all volunteer run 501c3 nonprofit organization located in Seattle, Washington.
+[cKeys](https://ckeys.org/) is a mechanical keyboard-based nonprofit organization located in Seattle, Washington.
 
-In addition to hosting the [Seattle Mechanical Keyboard Meetups](https://ckeys.org/events/), we teach [soldering workshops](https://ckeys.org/workshops/) featuring hardware hosted in this repository.
+In addition, to hosting the [Seattle Mechanical Keyboard Meetups](https://ckeys.org/events/), they have [soldering workshops](https://ckeys.org/workshops/) featuring hardware hosted in this repository.
 
 * Supported Hardware
     * The Obelus   - 4x4 Macropad
     * naKey        - Through hole numpad
     * Handwire 101 - Handwired 4x4 (Proton C or Pro Micro)
-    * The Dora Board - 4x5 with rotary encoder and Proton C pinouts

keyboards/ckeys/thedora/config.h

@@ -1,188 +0,0 @@
-/* Copyright 2019 Branden Byers
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER ckeys
-#define PRODUCT thedora
-#define DESCRIPTION A board for keyboard exploration.
-
-#define ENCODERS_PAD_A { B13 }
-#define ENCODERS_PAD_B { B15 }
-#define ENCODER_RESOLUTION 4
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 6
-
-#define MATRIX_ROW_PINS { A2, A1, A0, B8 }
-#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0 }
-
-// #define UNUSED_PINS { B14 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
-//#define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-//#define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define AUDIO_CLICKY
-
-#define DAC_SAMPLE_MAX 65535U
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-// Audio Click
-
-// Music Mode Polyphony
-// NOTE: Must change polyphony_rate to a number higher than 0 in voices.c
-#define AUDIO_VOICES
-#define PITCH_STANDARD_A 880.0f
-
-// Mouse keys
-#define MOUSEKEY_DELAY 0
-#define MOUSEKEY_INTERVAL 20
-#define MOUSEKEY_MAX_SPEED 2
-#define MOUSEKEY_TIME_TO_MAX 5
-#define MOUSEKEY_WHEEL_DELAY 0
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION

keyboards/ckeys/thedora/info.json

@@ -1,16 +0,0 @@
-{
-  "keyboard_name": "The Dora Board.",
-  "url": "https://ckeys.org/slides/exboard",
-  "maintainer": "brandenbyers",
-  "width": 4,
-  "height": 4,
-  "layouts": {
-    "LAYOUT_ortho_4x5": {
-      "key_count": 20,
-      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x": 4, "y":0},
-                 {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
-                 {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2},
-                 {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}]
-    }
-  }
-}

keyboards/ckeys/thedora/keymaps/default/config.h

@@ -1,3 +0,0 @@
-#pragma once
-
-// Add overrides here

keyboards/ckeys/thedora/keymaps/default/keymap.c

@@ -1,155 +0,0 @@
-#include QMK_KEYBOARD_H
-
-enum layers {
-  _BASE,                // base layer
-  _MUSIC,               // music mode
-  _MIDI,                // midi mode
-  _MOUSE,               // mouse keys
-  _ADMIN                // admin duties
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
-//           │         │         │         │         │         │
-//           │    7    │    8    │    9    │    /    │  ADMIN  │
-//  ROTORY   │         │         │         │         │         │
-//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  VOL UP   │         │         │         │         │         │
-//           │    4    │    5    │    6    │    *    │  MOUSE  │
-//  ROTORY   │         │         │         │         │         │
-//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  VOL DOWN │         │         │         │         │         │
-//           │    1    │    2    │    3    │    -    │  MIDI   │
-//           │         │         │         │         │         │
-// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
-// │  TOGGLE │         │         │         │         │         │
-// │  MUSIC  │    0    │    .    │    =    │    +    │  MUSIC  │
-// │         │         │         │         │         │         │
-// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
-
-  [_BASE] = LAYOUT(
-    KC_KP_7, KC_KP_8,   KC_KP_9,     KC_PSLS, MO(_ADMIN), MU_TOG,
-    KC_KP_4, KC_KP_5,   KC_KP_6,     KC_PAST, TG(_MOUSE),
-    KC_KP_1, KC_KP_2,   KC_KP_3,     KC_PMNS, TG(_MIDI),
-    KC_KP_0, KC_KP_DOT, KC_KP_EQUAL, KC_PPLS, MO(_MUSIC)
-  ),
-
-// MUSIC LAYER
- //          ┌─────────┬─────────┬─────────┬─────────┬─────────┐
- //          │         │         │         │         │         │
- //          │         │         │         │         │         │
- // ROTORY   │         │         │         │         │         │
- // RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
- // PAGE UP  │         │         │         │         │         │
- //          │         │         │         │         │         │
- // ROTORY   │         │         │         │         │         │
- // LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
- // PAGE DOWN│         │         │         │         │         │
- //          │         │         │         │  MODE   │         │
- //          │         │         │         │         │         │
- //┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
- //│         │         │         │         │         │         │
- //│         │ RECORD  │  STOP   │         │  PLAY   │         │
- //│         │         │         │         │         │         │
- //└─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
-
-  [_MUSIC] = LAYOUT(
-    _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, MU_MOD,
-    KC_LCTL, KC_LALT, _______, KC_LGUI, _______
-  ),
-
-// MIDI LAYER
-//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
-//           │         │         │         │         │         │
-//           │   D♯    │    E    │    F    │   F♯    │    G    │
-//  ROTORY   │         │         │         │         │         │
-//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE UP  │         │         │         │         │         │
-//           │   A♯    │    B    │    C    │   C♯    │    D    │
-//  ROTORY   │         │         │         │         │         │
-//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE DOWN│         │         │         │         │         │
-//           │    F    │   F♯    │    G    │   G♯    │    A    │
-//           │         │         │         │         │         │
-// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
-// │         │         │         │         │         │         │
-// │         │    C    │   C♯    │    D    │   D♯    │    E    │
-// │         │         │         │         │         │         │
-// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
-
-  [_MIDI] = LAYOUT(
-    MI_Ds_3, MI_E_3,  MI_F_3, MI_Fs_3, MI_G_3, _______,
-    MI_As_2, MI_B_2,  MI_C_3, MI_Cs_3, MI_D_3,
-    MI_F_2,  MI_Fs_2, MI_G_2, MI_Gs_2, TG(_MIDI),
-    MI_C_2,  MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2
-  ),
-
-// MOUSE LAYER
-//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
-//           │         │         │         │         │         │
-//           │  BTN 5  │         │  WHEEL  │         │         │
-//  ROTORY   │         │         │   UP    │         │         │
-//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE DOWN│         │         │         │         │         │
-//           │         │  LEFT   │  MOUSE  │  RIGHT  │         │
-//  ROTORY   │         │  CLICK  │   UP    │  CLICK  │         │
-//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE UP  │         │         │         │         │         │
-//           │  BTN 4  │  MOUSE  │  MOUSE  │  MOUSE  │         │
-//           │         │  LEFT   │  DOWN   │  RIGHT  │         │
-// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
-// │         │         │         │         │         │         │
-// │         │  BTN 3  │  WHEEL  │  WHEEL  │  WHEEL  │         │
-// │         │         │  LEFT   │  DOWN   │  RIGHT  │         │
-// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
-
-  [_MOUSE] = LAYOUT(
-    KC_MS_BTN5, _______,       KC_MS_WH_UP,   _______,        _______,    _______,
-    _______,    KC_MS_BTN1,    KC_MS_UP,      KC_MS_BTN2,     TG(_MOUSE),
-    KC_MS_BTN4, KC_MS_LEFT,    KC_MS_DOWN,    KC_MS_RIGHT,    _______,
-    KC_MS_BTN3, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, _______
-  ),
-
-// ADMIN LAYER
-//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
-//           │         │         │         │         │         │
-//           │  RESET  │         │         │         │         │
-//  ROTORY   │         │         │         │         │         │
-//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE UP  │         │         │         │         │         │
-//           │    4    │    5    │    6    │    *    │         │
-//  ROTORY   │         │         │         │         │         │
-//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE DOWN│         │         │         │         │         │
-//           │    1    │    2    │    3    │         │         │
-//           │         │         │         │         │         │
-// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
-// │         │         │         │         │         │         │
-// │         │    0    │    .    │    =    │         │         │
-// │         │         │         │         │         │         │
-// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
-
-  [_ADMIN] = LAYOUT(
-    RESET,   _______, _______, _______, TG(_ADMIN), _______,
-    _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______
-  ),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-};
-
-void encoder_update_user(uint8_t index, bool clockwise) {
-  if (index == 0) { /* First encoder */
-    if (clockwise) {
-      tap_code(KC_PGDN);
-    } else {
-      tap_code(KC_PGUP);
-    }
-  }
-}

keyboards/ckeys/thedora/keymaps/default/readme.md

@@ -1 +0,0 @@
-# The default keymap for the cKeys Handwire 101 4x4 keyboard.

keyboards/ckeys/thedora/readme.md

@@ -1,57 +0,0 @@
-# theDora Board
-
-![Thedora Board](https://ckeys.org/images/exboard-3.jpg)
-
-A 4x5 keyboard with rotary encoder, QWIIC connector, and header pinouts for easy access to all pins on the Proton C. This keyboard was built for QMK exploration big and small. What will you discover next?
-
-Keyboard Maintainer: [brandenbyers](https://github.com/brandenbyers)  
-Hardware Supported: theDora  
-Hardware Availability: [cKeys.org](https://ckeys.org)
-
-Make example for this keyboard (after setting up your build environment):
-
-`make ckeys/thedora:default`
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](Complete Newbs Guide).
-
----
-
-## Slides
-
-Slides can be found at: https://ckeys.org/slides/exboard/
-
-## Case Design
-
-The acrylic laser cutter file is coming soon!
-
-## PCB Design
-
-All cKeys PCBs are open source. However, this one has not been posted yet because it needs to be cleaned up a bit! Coming soon!
-
-## Firmware
-
-If you want to reflash the pre-installed firmware, use the `.bin` file for Proton C. Flash with the QMK Toolbox or via the command line.
-
-Building for Proton C: `make ckeys/thedora:default`
-
-## Default Layout
-
-You can find the default layout in `thedora/keymaps/default/keymap.c`
-
-## Rotary Encoder
-
-This is the bit of code at the end of `keymap.c` that needs to changed if you want to change the behavior of the rotary encoder.
-
-```
-void encoder_update_user(uint8_t index, bool clockwise) {
-  if (index == 0) { /* First encoder */
-    if (clockwise) {
-      tap_code(KC_PGDN); // What the rotary encoder repeatedly does when turned right.
-    } else {
-      tap_code(KC_PGUP); // What it does when turned to the left.
-    }
-  }
-}
-```
-
-![The Dora Board](https://ckeys.org/images/exboard-1.jpg)

keyboards/ckeys/thedora/rules.mk

@@ -1,19 +0,0 @@
-MCU = STM32F303
-
-# Build Options
-#   comment out to disable the options.
-#
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = no  # Console for debug
-COMMAND_ENABLE = no    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes     # USB Nkey Rollover
-AUDIO_ENABLE = yes
-MIDI_ENABLE = yes     # MIDI controls
-RGBLIGHT_ENABLE = no
-ENCODER_ENABLE = yes
-# SERIAL_LINK_ENABLE = yes

keyboards/ckeys/thedora/thedora.c

@@ -1,28 +0,0 @@
-#include "thedora.h"
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-  // Turn status LED on
-  //DDRD |= (1<<6);
-  //PORTD |= (1<<6);
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-  led_set_user(usb_led);
-}

keyboards/ckeys/thedora/thedora.h

@@ -1,21 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, \
-    k06, k07, k08, k09, k10, \
-    k11, k12, k13, k14, k15, \
-    k16, k17, k18, k19, k20 \
-) \
-{ \
-    { k00, k01, k02, k03, k04, k05, }, \
-    { k06, k07, k08, k09, k10 },       \
-    { k11, k12, k13, k14, k15 },       \
-    { k16, k17, k18, k19, k20 }        \
-}
-

keyboards/coseyfannitutti/discipline/config.h

@@ -1,247 +0,0 @@
-/*Copyright 2019 coseyfannitutti
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6869
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    coseyfannitutti
-#define PRODUCT         DISCIPLINE
-#define DESCRIPTION     65% keyboard that can be assembled with only through hole components
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-#define MATRIX_ROW_PINS { B2, A1, B1, A0, B0 }
-#define MATRIX_COL_PINS { A2, B3, A3, B4, A4, D5, D6, C6, C5, C4, C3, C2, C1, C0, D7 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-#define NO_UART 1
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP_ALT       SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER0_ALT     GRAVE
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
-

keyboards/coseyfannitutti/discipline/discipline.c

@@ -1,24 +0,0 @@
-/* Copyright 2019 coseyfannitutti
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "discipline.h"
-
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}

keyboards/coseyfannitutti/discipline/discipline.h

@@ -1,78 +0,0 @@
-/* Copyright 2019 coseyfannitutti
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define _x_ KC_NO
-
-#include "quantum.h"
-
-#define LAYOUT_65_ansi( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, K2E, \
-  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-  K40, K41, K42,                K46,           K49, K4A, K4B, K4C, K4D, K4E \
-) { \
-{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
-{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
-{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \
-{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
-{ K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E} \
-}
-
-#define LAYOUT_65_ansi_2_right_mods( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, K2E, \
-  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-  K40, K41, K42,                K46,           K49, K4A,      K4C, K4D, K4E \
-) { \
-{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
-{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
-{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \
-{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
-{ K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, _x_, K4C, K4D, K4E} \
-}
-
-#define LAYOUT_wkl_ansi_2_right_mods( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, K2E, \
-  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-  K40,      K42,                K46,           K49, K4A,      K4C, K4D, K4E \
-) { \
-{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
-{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
-{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \
-{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
-{ K40, _x_, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, _x_, K4C, K4D, K4E} \
-}
-
-#define LAYOUT_wkl_ansi_3_right_mods( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, K2E, \
-  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-  K40,      K42,                K46,           K49, K4A, K4B, K4C, K4D, K4E \
-) { \
-{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
-{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
-{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \
-{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
-{ K40, _x_, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E} \
-}
-

keyboards/coseyfannitutti/discipline/info.json

@@ -1,21 +0,0 @@
-{
-    "keyboard_name": "DISCIPLINE", 
-    "url": "https://github.com/coseyfannitutti/discipline", 
-    "maintainer": "coseyfannitutti", 
-    "width": 16, 
-    "height": 5, 
-    "layouts": {
-        "LAYOUT_65_ansi": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
-        },
-        "LAYOUT_65_ansi_2_right_mods": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Fn", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
-        },
-        "LAYOUT_wkl_ansi_2_right_mods": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Fn", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
-        },
-        "LAYOUT_wkl_ansi_3_right_mods": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
-        }
-    }
-}

keyboards/coseyfannitutti/discipline/keymaps/67_ansi/keymap.c

@@ -1,68 +0,0 @@
-/* Copyright 2019 COSEYFANNITUTTI
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-#define _BL 0
-#define _FL 1
-
-  /* Qwerty
-   * .---------------------------------------------------------------------------------------------.
-   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
-   * |---------------------------------------------------------------------------------------------+
-   * | Ctrl |  Win  |  Alt  |              Space                | RAlt | FN |||||||  L |  D  |  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-  /* FnLayer
-   * .---------------------------------------------------------------------------------------------.
-   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |     |     |     |RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |     |     |     |     |     |     |     |     |     |     | INS |    Enter  | HOME|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |     |     |     |     |     |     |     |     |     |     |  Shift  |VOLUP| END |
-   * |---------------------------------------------------------------------------------------------+
-   * | Ctrl |  Win  |  Alt  |                                   | RAlt| FN |||||||  L  |VOLDN|  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BL] = LAYOUT_65_ansi_2_right_mods(
-      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_GRV,
-      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,
-      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGUP,
-      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_PGDN,
-      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL),           KC_LEFT, KC_DOWN,  KC_RIGHT),
-
-  [_FL] = LAYOUT_65_ansi_2_right_mods(
-     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
-      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
-     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
-     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
-     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
-      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
-     /* ctrl     win      alt                              space                    alt      fn       ctrl      left     down     right*/
-      KC_LCTL, KC_LGUI, KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS,            KC_TRNS, KC_VOLD,  KC_TRNS)
-};

keyboards/coseyfannitutti/discipline/keymaps/coseyfannitutti/keymap.c

@@ -1,69 +0,0 @@
-/* Copyright 2019 COSEYFANNITUTTI
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-#define _BL 0
-#define _FL 1
-
-  /* Qwerty
-   * .---------------------------------------------------------------------------------------------.
-   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
-   * |---------------------------------------------------------------------------------------------+
-   * | Ctrl |  Win  |  Alt  |              Space                | RAlt | FN |||||||  L |  D  |  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-  /* FnLayer
-   * .---------------------------------------------------------------------------------------------.
-   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |     |     |     |RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |     |     |     |     |     |     |     |     |     |     | INS |    Enter  | HOME|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |     |     |     |     |     |     |     |     |     |     |  Shift  |VOLUP| END |
-   * |---------------------------------------------------------------------------------------------+
-   * | Ctrl |  Win  |  Alt  |                                   | RAlt| FN |||||||  L  |VOLDN|  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BL] = LAYOUT_65_ansi_2_right_mods(
-      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_DEL,
-      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_PGUP,
-      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGDN,
-      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    MO(_FL),
-      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL),           KC_LEFT, KC_DOWN,  KC_RIGHT),
-
-  [_FL] = LAYOUT_65_ansi_2_right_mods(
-     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
-      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
-     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
-     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
-     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
-      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
-     /* ctrl     win      alt                              space                    alt      fn                  left     down     right*/
-      KC_LCTL, KC_LGUI, KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS,             KC_TRNS, KC_VOLD,  KC_TRNS)
-};
-

keyboards/coseyfannitutti/discipline/keymaps/default/keymap.c

@@ -1,68 +0,0 @@
-/* Copyright 2019 COSEYFANNITUTTI
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-#define _BL 0
-#define _FL 1
-
-  /* Qwerty
-   * .---------------------------------------------------------------------------------------------.
-   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
-   * |---------------------------------------------------------------------------------------------+
-   * | Ctrl |  Win  |  Alt  |              Space                | RAlt | FN |RCtrl|  L |  D  |  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-  /* FnLayer
-   * .---------------------------------------------------------------------------------------------.
-   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |     |     |     |RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |     |     |     |     |     |     |     |     |     |     | INS |    Enter  | HOME|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |     |     |     |     |     |     |     |     |     |     |  Shift  |VOLUP| END |
-   * |---------------------------------------------------------------------------------------------+
-   * | Ctrl |  Win  |  Alt  |                                   | RAlt| FN |RCtrl|  L  |VOLDN|  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BL] = LAYOUT_65_ansi(
-      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_GRV,
-      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,
-      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGUP,
-      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_PGDN,
-      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL), KC_RCTL,  KC_LEFT, KC_DOWN,  KC_RIGHT),
-
-  [_FL] = LAYOUT_65_ansi(
-     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
-      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
-     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
-     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
-     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
-      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
-     /* ctrl     win      alt                              space                    alt      fn       ctrl      left     down     right*/
-      KC_LCTL, KC_LGUI, KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS, KC_RCTL,  KC_TRNS, KC_VOLD,  KC_TRNS)
-};

keyboards/coseyfannitutti/discipline/keymaps/wkl_ansi_2_right_mods/keymap.c

@@ -1,68 +0,0 @@
-/* Copyright 2019 COSEYFANNITUTTI
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-#define _BL 0
-#define _FL 1
-
-  /* Qwerty
-   * .---------------------------------------------------------------------------------------------.
-   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
-   * |---------------------------------------------------------------------------------------------+
-   * | Ctrl    |   Alt  |              Space                |  RAlt  |   FN    |     L |  D  |  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-  /* FnLayer
-   * .---------------------------------------------------------------------------------------------.
-   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |     |     |     |RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |     |     |     |     |     |     |     |     |     |     | INS |    Enter  | HOME|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |     |     |     |     |     |     |     |     |     |     |  Shift  |VOLUP| END |
-   * |---------------------------------------------------------------------------------------------+
-   * |  Ctrl    |   Alt  |                                    |  RAlt   |   FN   |  L  |VOLDN|  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BL] = LAYOUT_wkl_ansi_2_right_mods(
-      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_GRV,
-      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,
-      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGUP,
-      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_PGDN,
-      KC_LCTL,          KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL),           KC_LEFT, KC_DOWN,  KC_RIGHT),
-
-  [_FL] = LAYOUT_wkl_ansi_2_right_mods(
-     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
-      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
-     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
-     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
-     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
-      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
-     /* ctrl              alt                              space                    alt      fn                 left     down     right*/
-      KC_LCTL,          KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS,            KC_TRNS, KC_VOLD,  KC_TRNS)
-};

keyboards/coseyfannitutti/discipline/keymaps/wkl_ansi_3_right_mods/keymap.c

@@ -1,68 +0,0 @@
-/* Copyright 2019 COSEYFANNITUTTI
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-#define _BL 0
-#define _FL 1
-
-  /* Qwerty
-   * .---------------------------------------------------------------------------------------------.
-   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
-   * |---------------------------------------------------------------------------------------------+
-   * |   Ctrl   |    Alt    |              Space                | RAlt | FN |RCtrl|  L |  D  |  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-  /* FnLayer
-   * .---------------------------------------------------------------------------------------------.
-   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
-   * |---------------------------------------------------------------------------------------------+
-   * | Tab    |STATC|BRTHE|RNBOW|RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
-   * |---------------------------------------------------------------------------------------------+
-   * | Caps    |RGBH+|RGBS+|RGBB+|     |     |     |     |     |     |     | INS |    Enter  | HOME|
-   * |---------------------------------------------------------------------------------------------+
-   * | Shift     |RGBH-|RGBS-|RGBB-|     |     |     |     |RGBM-|RGBM+|RGBTG|  Shift  |VOLUP| END |
-   * |---------------------------------------------------------------------------------------------+
-   * |   Ctrl   |     Alt   |                                   | RAlt| FN |RCtrl|  L  |VOLDN|  R  |
-   * '---------------------------------------------------------------------------------------------'
-   */
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BL] = LAYOUT_wkl_ansi_3_right_mods(
-      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_GRV,
-      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,
-      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGUP,
-      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_PGDN,
-      KC_LCTL,          KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL), KC_RCTL,  KC_LEFT, KC_DOWN,  KC_RIGHT),
-
-  [_FL] = LAYOUT_wkl_ansi_3_right_mods(
-     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
-      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
-     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
-     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
-     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
-      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
-     /* ctrl              alt                              space                    alt      fn       ctrl      left     down     right*/
-      KC_LCTL,          KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS, KC_RCTL,  KC_TRNS, KC_VOLD,  KC_TRNS)
-};

keyboards/coseyfannitutti/discipline/readme.md

@@ -1,15 +0,0 @@
-# DISCIPLINE
-
-![discipline](https://i.imgur.com/OqQ1Ko8.jpg)
-
-A 65% keyboard that can be assembled with only through hole components, including usb type-c
-
-Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti)  
-Hardware Supported: DISCIPLINE, atmega32a  
-Hardware Availability: [cftkb.com](http://www.cftkb.com), [GitHub](https://github.com/coseyfannitutti/discipline)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make coseyfannitutti/discipline:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/coseyfannitutti/discipline/rules.mk

@@ -1,91 +0,0 @@
-# MCU name
-MCU = atmega32a
-PROTOCOL = VUSB
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-#
-# This uses usbaspbootloader
-BOOTLOADER = USBasp
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-
-# Flash program via avrdude, but default command is not suitable.
-# You can use plaid:default:program
-PROGRAM_CMD = avrdude -c usbasp -p m32 -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-# disable debug code
-OPT_DEFS = -DDEBUG_LEVEL=0
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-LAYOUTS = 65_ansi

keyboards/ergo42/rev1/config.h

@@ -40,6 +40,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
 // #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
 
+#define CATERINA_BOOTLOADER
+
 /* define tapping term */
 #define TAPPING_TERM 100
 

keyboards/ergo42/rules.mk

@@ -43,15 +43,13 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = caterina
-
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in

keyboards/gergo/config.h

@@ -21,9 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 #include "config_common.h"
 
-#define BOOTMAGIC_LITE_ROW 13
-#define BOOTMAGIC_LITE_COLUMN 2
-
 /* Defaults */
 #ifndef BALLSTEP
 #define BALLSTEP 20

keyboards/gergo/keymaps/oled/config.h

@@ -1,4 +0,0 @@
-#pragma once
-
-#define IGNORE_MOD_TAP_INTERRUPT
-#define OLED_FONT_H "keyboards/gergo/keymaps/oled/glcdfont.c"

keyboards/gergo/keymaps/oled/glcdfont.c

@@ -1,232 +0,0 @@
-// 'loveLain', 128x32px
-
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-
-static const unsigned char font[] PROGMEM = {
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
-0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
-0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
-0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
-0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
-0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
-0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
-0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
-0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
-0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
-0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
-0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
-0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
-0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
-0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
-0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
-0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
-0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
-0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
-0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
-0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
-0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
-0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
-0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
-0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
-0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
-0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
-0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
-0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
-0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
-0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
-0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
-0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
-0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
-0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
-0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
-0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
-0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
-0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
-0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
-0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
-0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
-0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
-0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
-0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
-0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
-0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
-0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
-0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
-0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
-0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
-0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
-0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
-0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
-0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
-0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
-0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
-0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
-0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
-0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
-0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
-0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
-0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
-0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
-0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
-0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
-0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
-0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
-0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
-0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
-0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
-0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
-0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
-0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
-0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
-0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
-0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
-0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
-0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
-0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
-0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
-0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
-0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
-0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
-0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
-0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
-0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
-0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
-0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
-0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
-0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
-0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
-0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
-0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
-0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
-0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
-0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
-0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
-0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
-0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
-0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
-0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
-0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
-0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
-0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
-0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
-0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
-0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
-0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
-0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
-0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
-0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
-0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
-0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
-0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
-0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
-0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
-0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
-0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
-0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
-0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
-0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
-0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
-0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
-0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x40, 0x28,
-0x00, 0x48, 0xC2, 0x24, 0x10, 0x12,
-0x24, 0x10, 0x12, 0x29, 0x10, 0x22,
-0x58, 0x44, 0x90, 0x20, 0x80, 0x00,
-0x00, 0x04, 0x10, 0x88, 0x40, 0x20,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xE8,
-0x00, 0x20, 0x00, 0x10, 0x08, 0x08,
-0x00, 0x08, 0x10, 0x00, 0x10, 0x20,
-0x40, 0x40, 0x80, 0x00, 0x00, 0x00,
-0x00, 0x14, 0x42, 0x01, 0x00, 0x01,
-0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
-0x40, 0x40, 0x00, 0x40, 0x40, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x40,
-0x10, 0x08, 0x00, 0x00, 0x00, 0x40,
-0x10, 0x80, 0x50, 0x22, 0xA4, 0x10,
-0x52, 0x24, 0x10, 0x32, 0x08, 0x44,
-0x64, 0x20, 0x90, 0x80, 0x40, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
-0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
-0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
-0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
-0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
-0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
-0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
-0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x82, 0x11, 0x48, 0x00,
-0x37, 0xC0, 0x00, 0x00, 0x08, 0x10,
-0x02, 0x48, 0x14, 0x00, 0x00, 0x00,
-0x41, 0x42, 0xA2, 0x81, 0x42, 0x61,
-0x04, 0x22, 0x00, 0x40, 0x82, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xDE,
-0x00, 0x49, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x01, 0x02, 0x04,
-0x08, 0x00, 0x08, 0x15, 0x20, 0x40,
-0x00, 0x40, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x2C, 0x03, 0x60, 0x20, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
-0x85, 0x20, 0x00, 0x42, 0x42, 0x42,
-0x85, 0x44, 0xC2, 0x01, 0x00, 0x00,
-0x48, 0x10, 0x04, 0x48, 0x10, 0x00,
-0x00, 0x01, 0xA0, 0x5E, 0x00, 0xA2,
-0x14, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
-0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
-0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
-0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
-0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
-0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
-0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
-0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x01, 0x00, 0x09,
-0x12, 0x20, 0x89, 0x12, 0x42, 0x24,
-0x04, 0x48, 0x0C, 0x90, 0x06, 0x21,
-0x4A, 0x05, 0x84, 0x00, 0x02, 0x00,
-0x00, 0x00, 0x08, 0x04, 0x00, 0x02,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xAD,
-0x00, 0x2A, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x20, 0x00, 0x20,
-0x00, 0x40, 0x00, 0x00, 0x40, 0x00,
-0x40, 0x00, 0x40, 0x40, 0x00, 0x40,
-0x00, 0x40, 0x20, 0x00, 0x90, 0x48,
-0x03, 0x10, 0x08, 0x03, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x02, 0x09,
-0x10, 0x20, 0x08, 0x00, 0x00, 0x02,
-0x00, 0x02, 0x48, 0x15, 0x02, 0xA4,
-0x08, 0x44, 0x88, 0x24, 0x48, 0x04,
-0xA2, 0x15, 0x00, 0x0A, 0x01, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-static const unsigned int  fontLen = 512;

keyboards/gergo/keymaps/oled/keymap.c

@@ -1,145 +0,0 @@
-/* Good on you for modifying your layout! if you don't have
- * time to read the QMK docs, a list of keycodes can be found at
- *
- * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
- *
- * There's also a template for adding new layers at the bottom of this file!
- */
-
-#include QMK_KEYBOARD_H
-
-#define BASE 0 // default layer
-#define SYMB 1 // symbols
-#define NUMB 2 // numbers/motion
-
-// Blank template at the bottom
-enum customKeycodes {
-	URL  = 1
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Keymap 0: Basic layer
- *
- * ,-------------------------------------------.                         ,-------------------------------------------.
- * | L1/ESC |   Q  |   W  |   E  |   R  |   T  |                         |   Y  |   U  |   I  |   O  |   P  |  | \   |
- * |--------+------+------+------+------+------|------.           .------|------+------+------+------+------+--------|
- * |Ctrl/BS |   A  |   S  |  D   |   F  |   G  | RMB  |           |      |   H  |   J  |   K  |   L  | ;  : |  ' "   |
- * |--------+------+------+------+------+------|------|           |------|------+------+------+------+------+--------|
- * | LShift |   Z  |   X  |   C  |   V  |   B  | LMB  |           |      |   N  |   M  | ,  < | . >  | /  ? |  - _   |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *                    .----------.   .-------.                                 .------.   .-----.
- *                    | Super/Del|   |Ent/ALT|                                 | Tab  |   |BKSP |
- *                    '----------'   '-------'                                 `------.   '-----'
- *                                        ,-------.                      ,-------.
- *                                        | MMB   |                      | PgDn  |
- *                                 ,------|-------|                      |-------|------.
- *                                 | SYMB | NUMB  |                      | SYMB  | NUMB |
- *                                 | Space| Escape|                      | Mod   |Space |
- *                                 |      |       |                      |       |      |
- *                                 `--------------'                      `--------------'
- */
-[BASE] = LAYOUT_gergo(
-    LT(NUMB, KC_ESC),       KC_Q,  KC_W,   KC_E,   KC_R, KC_T,                                          KC_Y,    KC_U, KC_I, KC_O,   KC_P,    KC_PIPE,
-    MT(MOD_LCTL, KC_BSPC),  KC_A,  KC_S,   KC_D,   KC_F, KC_G, KC_BTN2,                       KC_TRNS,  KC_H,    KC_J, KC_K, KC_L,   KC_SCLN, KC_QUOT,
-    KC_RSFT,                KC_Z,  KC_X,   KC_C,   KC_V, KC_B, KC_BTN1, KC_BTN3,     KC_PGDN, KC_BSPC,  KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
-  MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT), LT(SYMB, KC_SPC), LT(NUMB, KC_ESC),    LT(SYMB, KC_ENT), LT(NUMB, KC_SPC), KC_TAB, KC_BSPC
-    ),
-/* Keymap 1: Symbols layer
- *
- * ,-------------------------------------------.                         ,-------------------------------------------.
- * |        |  !   |  @   |  {   |  }   |  |   |                         |      |      |      |      |      |  \ |   |
- * |--------+------+------+------+------+------|------.           .------|------+------+------+------+------+--------|
- * |        |  #   |  $   |  (   |  )   |  `   |      |           |      |   +  |  -   |  /   |  *   |  %   |  ' "   |
- * |--------+------+------+------+------+------|------|           |------|------+------+------+------+------+--------|
- * |        |  %   |  ^   |  [   |  ]   |  ~   |      |           |      |   &  |  =   |  ,   |  .   |  / ? | - _    |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *                        .------.   .------.                                 .------.   .-----.
- *                        |      |   |      |                                 |      |   | DEL |
- *                        '------'   '------'                                 `------.   '-----'
- *                                        ,-------.                     ,-------.
- *                                        |       |                     | PgUp  |
- *                                 ,------|-------|                     |-------|------.
- *                                 |      |       |                     |       |      |
- *                                 |   ;  |   =   |                     |   =   |   ;  |
- *                                 |      |       |                     |       |      |
- *                                 `--------------'                     `--------------'
- */
-[SYMB] = LAYOUT_gergo(
-    KC_TRNS, KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE,                                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
-    KC_TRNS, KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,  KC_TRNS,                          KC_TRNS, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
-    KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS,        KC_TRNS, KC_TRNS, KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
-                                        KC_TRNS, KC_TRNS, KC_SCLN, KC_EQL,         KC_EQL,  KC_SCLN, KC_PGUP, KC_DEL
-    ),
-/* Keymap 2: Pad/Function layer
- *
- * ,-------------------------------------------.                         ,-------------------------------------------.
- * |        |   1  |  2   |  3   |  4   |  5   |                         |  6   |  7   |  8   |  9   |  0   |        |
- * |--------+------+------+------+------+------|------.           .------|------+------+------+------+------+--------|
- * |  F1    |  F2  | F3   | F4   | F5   | F6   | BTN1 |           |      | LEFT | DOWN |  UP  | RIGHT|VolDn | VolUp  |
- * |--------+------+------+------+------+------|------|           |------|------+------+------+------+------+--------|
- * |  F7    |  F8  | F9   | F10  | F11  | F12  | BTN2 |           |      | MLFT | MDWN | MUP  | MRGHT|Ply/Pa|  Skip  |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *                        .------.   .------.                                 .------.   .-----.
- *                        |      |   |      |                                 |      |   |     |
- *                        '------'   '------'                                 `------.   '-----'
- *                                        ,-------.                     ,-------.
- *                                        |       |                     | PgUp  |
- *                                 ,------|-------|                     |-------|------.
- *                                 |      |       |                     |       |      |
- *                                 |      |       |                     |       |      |
- *                                 |      |       |                     |       |      |
- *                                 `--------------'                     `--------------'
- */
-[NUMB] = LAYOUT_gergo(
-    KC_TRNS, KC_1, 	  KC_2,    KC_3,    KC_4,    KC_5,                                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_TRNS,
-    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                         KC_TRNS,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_VOLD, KC_VOLU,
-    KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS,     KC_TRNS, KC_TRNS,  KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT,
-                                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS
-    ),
-};
-
-/* Keymap template
- *
- * ,-------------------------------------------.                         ,-------------------------------------------.
- * |        |      |      |      |      |      |                         |      |      |      |      |      |        |
- * |--------+------+------+------+------+------|------.           .------|------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * |--------+------+------+------+------+------|------|           |------|------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
- * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *                        .------.   .------.                                 .------.   .-----.
- *                        |      |   |      |                                 |      |   |     |
- *                        '------'   '------'                                 `------.   '-----'
- *                                        ,-------.       ,-------.
- *                                        |       |       |       |
- *                                 ,------|-------|       |-------|------.
- *                                 |      |       |       |       |      |
- *                                 |      |       |       |       |      |
- *                                 |      |       |       |       |      |
- *                                 `--------------'       `--------------'
-[SYMB] = LAYOUT_gergo(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                           KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-    )
- */
-
-#ifdef OLED_DRIVER_ENABLE
-oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-	return OLED_ROTATION_180;
-}
-
-void oled_task_user(void) {
-    static const char PROGMEM font_logo[] = {
-        0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
-        0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
-		0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
-	oled_write_P(font_logo, false);
-
-}
-	//for (int i = 0; i < fontLen; i++) {
-    	//oled_write_char(pgm_read_byte(lain+i), false);
-    	//oled_write_char((char)i, false);
-	//}
-#endif

keyboards/gergo/keymaps/oled/readme.md

@@ -1,10 +0,0 @@
-# [Gergo! By g Heavy Industries](http://gboards.ca)
-
-![Gergo image](https://4.bp.blogspot.com/-889nMXxgSM0/XCNxwnO5kUI/AAAAAAAA6mI/tZbWgZVCBW0dyZOCGJDkjN06DVax7j8XwCLcBGAs/s1600/48422820_967732713413298_485744639215665152_n.jpg)
-
-This is the default keymap for Gergo, it's based heavily off of the naps62 ErgoDox layout and is aimed at a programmer friendly keymap.
-
-## Settings
-To edit various settings, enable the 1u trackball and whatnot please modify /keyboards/gergo/keymaps/default/rules.mk
-
-Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR!

keyboards/gergo/keymaps/oled/rules.mk

@@ -1,38 +0,0 @@
-#----------------------------------------------------------------------------
-# make gergo:germ:dfu
-# Make sure you have dfu-programmer installed!
-#----------------------------------------------------------------------------
-# Firmware options
-BALLER = no 			# Enable to ball out
-BALLSTEP = 20  			# Multiple in px to move, multiplied by layer number
-SCROLLSTEP = 1 			# Lines to scroll with ball
-MOUSEKEY_ENABLE = yes  		# Mouse keys(+4700), needed for baller
-OLED_DRIVER_ENABLE = yes
-LOCAL_GLCDFONT = yes
-
-#Debug options
-VERBOSE 		 = yes
-DEBUG_MATRIX_SCAN_RATE   = no
-DEBUG_BALLER 		 = no
-DEBUG_MATRIX		 = yes
-
-# A bunch of stuff that you shouldn't touch unless you
-# know what you're doing.
-#
-# No touchy, capiche?
-ifneq ($(strip $(BALLSTEP)),)
-    OPT_DEFS += -DTRKSTEP=$(strip $(BALLSTEP))
-endif
-ifneq ($(strip $(SCROLLSTEP)),)
-    OPT_DEFS += -DSCROLLSTEP=$(strip $(SCROLLSTEP))
-endif
-ifeq ($(strip $(BALLER)), yes)
-	POINTING_DEVICE_ENABLE	= yes
-    OPT_DEFS += -DBALLER
-endif
-ifeq ($(strip $(DEBUG_BALLER)), yes)
-    OPT_DEFS += -DDEBUG_BALLER
-endif
-ifeq ($(strip $(DEBUG_MATRIX)), yes)
-    OPT_DEFS += -DDEBUG_MATRIX
-endif

keyboards/gergo/rules.mk

@@ -4,8 +4,7 @@
 # Do not edit this file! Make a copy of keymaps/default and modify that!
 #----------------------------------------------------------------------------
 # Source includes
-SRC += matrix.c 
-QUANTUM_LIB_SRC += i2c_master.c
+SRC += matrix.c i2c_master.c
 
 # Hardware info
 MCU = atmega32u4
@@ -18,6 +17,5 @@ CUSTOM_MATRIX 		= yes
 EXTRAKEY_ENABLE		= yes
 CONSOLE_ENABLE  	= yes
 COMMAND_ENABLE		= yes
-BOOTMAGIC_ENABLE = lite
 
 DEBOUNCE_TYPE  = eager_pr

keyboards/gh60/config.h

@@ -14,6 +14,10 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
@@ -148,3 +152,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
+
+#endif

keyboards/gh60/gh60.c

@@ -1,4 +1,4 @@
-#include "revc.h"
+#include "gh60.h"
 
 
 extern inline void gh60_caps_led_on(void);