Mihit/klipper_config
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

init

Browse Source
This commit is contained in:
Mihit
2025-08-04 19:20:45 +05:30
commit 005ea247e1
7 changed files with 527 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

86
.moonraker.conf.bkp Normal file
View File

@@ -0,0 +1,86 @@
[server]
host = 0.0.0.0
port = 7125
klippy_uds_address = /home/pi/printer_data/comms/klippy.sock
[authorization]
trusted_clients =
10.0.0.0/16
cors_domains =
*.lan
*.local
*://localhost
*://localhost:*
*://my.mainsail.xyz
*://app.fluidd.xyz
[file_manager]
queue_gcode_uploads = True
[octoprint_compat]
[job_queue]
load_on_startup = True
[history]
[update_manager]
channel = dev
refresh_interval = 168
[update_manager mainsail]
path = /home/pi/mainsail
repo = mainsail-crew/mainsail
channel = stable
type = web
[update_manager mainsail-config]
managed_services = klipper
origin = https://github.com/mainsail-crew/mainsail-config.git
path = /home/pi/mainsail-config
primary_branch = master
type = git_repo
[update_manager crowsnest]
type = git_repo
path = ~/crowsnest
origin = https://github.com/mainsail-crew/crowsnest.git
managed_services = crowsnest
install_script = tools/pkglist.sh
[update_manager timelapse]
type = git_repo
primary_branch = main
path = ~/moonraker-timelapse
origin = https://github.com/mainsail-crew/moonraker-timelapse.git
managed_services = klipper moonraker
[power Printer]
type = homeassistant
protocol = https
address = home.fieryeagle.org
port = 443
device = switch.printer
token = eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiI1MTJmMjA4ZjVjMzA0YTE3YjFmYjc2ZjNiYTM5YWVjOCIsImlhdCI6MTc0NzMxNjY4MSwiZXhwIjoyMDYyNjc2NjgxfQ.ZAsmTvECJxKf8Dl0pf-L1tox7yOndHQjAZNwMmWCZvk
domain = switch
initial_state = off
off_when_shutdown = True
off_when_shutdown_delay = 0
on_when_job_queued = True
locked_while_printing = True
restart_klipper_when_powered = True
restart_delay = 3
bound_services =
klipper
[power Wall_Light]
type = homeassistant
protocol = https
address = home.fieryeagle.org
port = 443
device = light.m1_light
token = eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiI1MTJmMjA4ZjVjMzA0YTE3YjFmYjc2ZjNiYTM5YWVjOCIsImlhdCI6MTc0NzMxNjY4MSwiZXhwIjoyMDYyNjc2NjgxfQ.ZAsmTvECJxKf8Dl0pf-L1tox7yOndHQjAZNwMmWCZvk
domain = light
[timelapse]

45
crowsnest.conf Normal file
View File

@@ -0,0 +1,45 @@
#### crowsnest.conf
#### This is the default config after installation.
#### It is also used as the default config in MainsailOS.
#### For details on how to configure this to your needs, see:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#####################################################################
#### #####
#### Information about ports and according URL's #####
#### #####
#####################################################################
#### #####
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
#### #####
#### Note: These ports are default for most Mainsail #####
#### installations. Using any other port would involve #####
#### changing the proxy configuration or using URLs #####
#### with the specific port like #####
#### http://<ip>:<port>/?action=[stream/snapshot] #####
#### #####
#####################################################################
#### RTSP Stream URL: ( if enabled and supported ) #####
#### rtsp://<ip>:<rtsp_port>/stream.h264 #####
#####################################################################
[crowsnest]
log_path: /home/pi/printer_data/logs/crowsnest.log
log_level: verbose # Valid Options are quiet/verbose/debug
delete_log: false # Deletes log on every restart, if set to true
no_proxy: false # If set to true, no reverse proxy is required. Only change this, if you know what you are doing.
[cam 1]
mode: ustreamer # ustreamer - Provides MJPG and snapshots. (All devices)
# camera-streamer - Provides WebRTC, MJPG and snapshots. (only RPiOS + RPi 0/1/2/3/4)
port: 8080 # HTTP/MJPG stream/snapshot port
device: /dev/v4l/by-id/usb-Jieli_Technology_USB_PHY_2.0-video-index0 # See log for available devices
resolution: 1920x1080 # <width>x<height> format
max_fps: 24 # If hardware supports it, it will be forced, otherwise ignored/coerced.
custom_flags: --allow-truncated-frames # You can run the stream services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see log for your camera capabilities.

24
macros.cfg Normal file
View File

@@ -0,0 +1,24 @@
[gcode_macro BEEP]
gcode:
{% set duration = params.P | default(100) | float %}
SET_PIN PIN=beeper VALUE=1
G4 P{duration}
SET_PIN PIN=beeper VALUE=0
[gcode_macro PRINT_END]
gcode:
G91 ; Relative positionning
G1 E-2 F2700 ; Retract a bit
G1 E-2 Z0.2 F2400 ; Retract and raise Z
G0 X5 Y5 F3000 ; Wipe out
G0 Z10 ; Raise Z more
G90 ; Absolute positionning
G0 X0 Y220 ; Present print
M106 S0 ; Turn-off fan
M104 S0 ; Turn-off hotend
M140 S0 ; Turn-off bed_temp
M84 ; Disable stepper motors
[gcode_macro Clean_Bed]
gcode:
_CLIENT_LINEAR_MOVE X=0 Y=220 F=1500

1
mainsail.cfg Symbolic link
View File

@@ -0,0 +1 @@
/home/pi/mainsail-config/mainsail.cfg

97
moonraker.conf Normal file
View File

@@ -0,0 +1,97 @@
[server]
host: 0.0.0.0
port: 7125
klippy_uds_address: /home/pi/printer_data/comms/klippy.sock
[authorization]
trusted_clients:
10.0.0.0/16
cors_domains:
*.lan
*.local
*://localhost
*://localhost:*
*://my.mainsail.xyz
*://app.fluidd.xyz
[file_manager]
# post processing for object cancel. Not recommended for low resource SBCs such as a Pi Zero. Default False
queue_gcode_uploads: True
[octoprint_compat]
[job_queue]
load_on_startup: True
[history]
[update_manager]
channel: dev
refresh_interval: 168
[update_manager mainsail]
path: /home/pi/mainsail
repo: mainsail-crew/mainsail
channel: stable
type: web
[update_manager mainsail-config]
managed_services: klipper
origin: https://github.com/mainsail-crew/mainsail-config.git
path: /home/pi/mainsail-config
primary_branch: master
type: git_repo
# Crowsnest update_manager entry
[update_manager crowsnest]
type: git_repo
path: ~/crowsnest
origin: https://github.com/mainsail-crew/crowsnest.git
managed_services: crowsnest
install_script: tools/pkglist.sh
[update_manager timelapse]
type: git_repo
primary_branch: main
path: ~/moonraker-timelapse
origin: https://github.com/mainsail-crew/moonraker-timelapse.git
managed_services: klipper moonraker
[power Printer]
type: homeassistant
protocol: https
address: home.fieryeagle.org
port: 443
device: switch.printer
token: eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiI1MTJmMjA4ZjVjMzA0YTE3YjFmYjc2ZjNiYTM5YWVjOCIsImlhdCI6MTc0NzMxNjY4MSwiZXhwIjoyMDYyNjc2NjgxfQ.ZAsmTvECJxKf8Dl0pf-L1tox7yOndHQjAZNwMmWCZvk
domain: switch
initial_state: off
off_when_shutdown: True
off_when_shutdown_delay: 0
on_when_job_queued: True
locked_while_printing: True
restart_klipper_when_powered: True
restart_delay: 3
bound_services:
klipper
[power Wall_Light]
type: homeassistant
protocol: https
address: home.fieryeagle.org
port: 443
device: light.m1_light
token: eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiI1MTJmMjA4ZjVjMzA0YTE3YjFmYjc2ZjNiYTM5YWVjOCIsImlhdCI6MTc0NzMxNjY4MSwiZXhwIjoyMDYyNjc2NjgxfQ.ZAsmTvECJxKf8Dl0pf-L1tox7yOndHQjAZNwMmWCZvk
domain: light
[timelapse]
## Following basic configuration is default to most images and don't need
## to be changed in most scenarios. Only uncomment and change it if your
## Image differ from standart installations. In most common scenarios
## a User only need [timelapse] in their configuration.
#output_path: ~/timelapse/
## Directory where the generated video will be saved
#frame_path: /tmp/timelapse/
## Directory where the temporary frames are saved
#ffmpeg_binary_path: /usr/bin/ffmpeg
## Directory where ffmpeg is installed

273
printer.cfg Normal file
View File

@@ -0,0 +1,273 @@
# Pin Mappings for Stock 2023 Creality Ender 3 V3 SE
#
# To use this configuration:
# 1. During "make menuconfig", select:
# - STM32F103 with a "28KiB bootloader"
# - Serial communication on USART1 (PA10/PA9)
#
# 2. For a direct serial connection:
# - In "make menuconfig", select:
# - "Enable extra low-level configuration options"
# - Serial communication on USART3 (PB11/PB10)
# - This is accessible via the 10-pin IDC cable used for the LCD module:
# - Pin 3: Tx
# - Pin 4: Rx
# - Pin 9: GND
# - Pin 10: VCC
#
# 3. Build the firmware by running:
# - make
#
# 4. Flash the firmware:
# - Copy "klipper/out/klipper.bin" to an SD card.
# - Insert the SD card into the printer and power it on.
# - Ensure the firmware filename ends in ".bin" and is different from the last flashed filename.
#
# For further details, refer to https://www.klipper3d.org/Config_Reference.html.
#####################################################################
# Include the relevant configuration depending on what you are using.
#####################################################################
[include mainsail.cfg]
[include macros.cfg]
[include timelapse.cfg]
[mcu]
#####################################################################
# Obtain definition by "ls -l /dev/serial/by-id/"
#####################################################################
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
restart_method: command
[filament_switch_sensor filament_sensor]
switch_pin: ^PC15
pause_on_runout: true
[temperature_sensor mcu_temp]
sensor_type: temperature_mcu
min_temp: 0
max_temp: 100
[printer]
kinematics: cartesian
max_velocity: 250
max_accel: 2500
minimum_cruise_ratio: 0.5
square_corner_velocity: 5.0
max_z_velocity: 100
max_z_accel: 500
#####################################################################
# X/Y Stepper Settings
#####################################################################
[stepper_x]
step_pin: PC2
dir_pin: !PB9
enable_pin: !PC3
microsteps: 16
rotation_distance: 40
endstop_pin: !PA5
position_endstop: -6
position_min: -6
position_max: 230
homing_speed: 60
[tmc2209 stepper_x]
uart_pin: PB12
run_current: 0.6
sense_resistor: 0.150
stealthchop_threshold: 0
interpolate: True
[stepper_y]
step_pin: PB8
dir_pin: PB7
enable_pin: !PC3
microsteps: 16
rotation_distance: 40
endstop_pin: !PA6
position_endstop: -14
position_min: -14
position_max: 225
homing_speed: 60
[tmc2209 stepper_y]
uart_pin: PB13
run_current: 0.6
sense_resistor: 0.150
stealthchop_threshold: 0
interpolate: True
[force_move]
enable_force_move: True
#####################################################################
# Z Stepper Settings
#####################################################################
[stepper_z]
step_pin: PB6
dir_pin: !PB5
enable_pin: !PC3
microsteps: 16
rotation_distance: 8
endstop_pin: probe:z_virtual_endstop
position_min: -3
position_max: 250
homing_speed: 5
second_homing_speed: 1
homing_retract_dist: 2.5
[tmc2209 stepper_z]
uart_pin: PB14
run_current: 0.8
sense_resistor: 0.150
stealthchop_threshold: 0
interpolate: True
#####################################################################
# Extruder
#####################################################################
[extruder]
step_pin: PB4
dir_pin: PB3
enable_pin: !PC3
microsteps: 16
rotation_distance: 7.3403877
nozzle_diameter: 0.400
filament_diameter: 1.750
max_extrude_cross_section: 5
max_extrude_only_distance: 500
pressure_advance: 0.04
heater_pin: PA1
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC5
#control: pid
# Tuned for stock hardware with a target of 200 degrees Celsius.
#pid_Kp: 27.142
#pid_Ki: 1.371
#pid_Kd: 134.351
min_temp: 0
max_temp: 260
#####################################################################
# Bed Heater
#####################################################################
[heater_bed]
heater_pin: PB2
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC4
#control: pid
# Tuned for stock hardware with a target of 70 degrees Celsius.
#pid_kp: 66.371
#pid_ki: 0.846
#pid_kd: 1301.702
min_temp: 0
max_temp: 100
#####################################################################
# Bed Mesh & BL Touch
#####################################################################
[bed_mesh]
speed: 150
mesh_min: 10,10
mesh_max: 206,210.5
probe_count: 7, 7
algorithm: bicubic
[bltouch]
sensor_pin: ^PC14
control_pin: PC13
x_offset: -24.0
y_offset: -14.5
#z_offset: 0.1
speed: 20
pin_move_time: 0.4
stow_on_each_sample: False
probe_with_touch_mode: True
#####################################################################
# Fan Control
#####################################################################
[heater_fan hotend_fan]
pin: PC1
[fan]
pin: PA0
#####################################################################
# Idle Timeout & Homing
#####################################################################
[idle_timeout]
gcode:
OFF
timeout: 600
[safe_z_home]
home_xy_position: 139, 127
speed: 60
z_hop: 10
z_hop_speed: 5
#####################################################################
# Beeper
#####################################################################
[output_pin beeper]
pin: PB0
#####################################################################
# G-Code features
#####################################################################
[gcode_arcs]
[exclude_object]
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [bltouch]
#*# z_offset = 1.510
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 0.222500, -0.060000, -0.092500, -0.065000, -0.027500, -0.002500, 0.010000
#*# 0.150000, -0.077500, -0.155000, -0.105000, -0.052500, 0.002500, -0.025000
#*# 0.187500, -0.085000, -0.157500, -0.120000, -0.100000, -0.042500, -0.057500
#*# 0.062500, -0.087500, -0.140000, -0.130000, -0.112500, -0.097500, -0.090000
#*# 0.007500, -0.077500, -0.150000, -0.122500, -0.112500, -0.105000, -0.097500
#*# 0.142500, -0.007500, -0.095000, -0.102500, -0.102500, -0.082500, -0.080000
#*# 0.305000, 0.275000, 0.040000, 0.022500, 0.007500, -0.002500, 0.020000
#*# x_count = 7
#*# y_count = 7
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = bicubic
#*# tension = 0.2
#*# min_x = 10.0
#*# max_x = 205.95999999999998
#*# min_y = 10.0
#*# max_y = 210.45999999999998
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 28.332
#*# pid_ki = 1.536
#*# pid_kd = 130.682
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 67.201
#*# pid_ki = 0.976
#*# pid_kd = 1156.696

1
timelapse.cfg Symbolic link
View File

@@ -0,0 +1 @@
/home/pi/moonraker-timelapse/klipper_macro/timelapse.cfg