Merge point for 2020 Nov 28 Breaking Change

* Add rainkeeb

Add support for rainkeeb

* gpl license added

* updated

* Apply suggestions from code review

Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>

* Apply suggestions from code review

Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>

* Update info.json

* via keymap added

* updated keymap and .h to work properly

* fixed oled code oops

Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>

.github/workflows/develop_api.yml

@@ -0,0 +1,42 @@
+name: Update Develop API Data
+
+on:
+  push:
+    branches:
+    - develop
+    paths:
+    - 'keyboards/**'
+    - 'layouts/community/**'
+
+jobs:
+  api_data:
+    runs-on: ubuntu-latest
+    container: qmkfm/base_container
+
+    # protect against those who work in their fork on develop
+    if: github.repository == 'qmk/qmk_firmware'
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        fetch-depth: 1
+        persist-credentials: false
+
+    - name: Generate API Data
+      run: qmk generate-api
+
+    - name: Install rsync
+      run: |
+        apt-get update && apt-get install -y rsync
+
+    - name: Upload API Data
+      uses: JamesIves/github-pages-deploy-action@3.7.1
+      with:
+        ACCESS_TOKEN: ${{ secrets.API_TOKEN_GITHUB }}
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        BRANCH: main
+        FOLDER: api_data/v1
+        CLEAN: true
+        GIT_CONFIG_EMAIL: hello@qmk.fm
+        REPOSITORY_NAME: qmk/qmk_keyboards_devel
+        TARGET_FOLDER: v1

.github/workflows/develop_update.yml

@@ -0,0 +1,37 @@
+name: Update develop after master merge
+
+on:
+  push:
+    branches:
+    - master
+
+
+jobs:
+  develop_update:
+    runs-on: ubuntu-latest
+
+    if: github.repository == 'qmk/qmk_firmware'
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        fetch-depth: 0
+
+    - name: Checkout develop
+      run: |
+        git fetch origin master develop
+        git checkout develop
+
+    - name: Check if branch locked
+      id: check_locked
+      uses: andstor/file-existence-action@v1
+      with:
+        files: ".locked"
+
+    - name: Update develop from master
+      if: steps.check_locked.outputs.files_exists == 'false'
+      run: |
+        git config --global user.name "QMK Bot"
+        git config --global user.email "hello@qmk.fm"
+        git merge origin/master
+        git push origin develop

Makefile

@@ -272,11 +272,24 @@ endef
 define PARSE_RULE
     RULE := $1
     COMMANDS :=
+    REQUIRE_PLATFORM_KEY :=
     # If the rule starts with all, then continue the parsing from
     # PARSE_ALL_KEYBOARDS
     ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
         KEYBOARD_RULE=all
         $$(eval $$(call PARSE_ALL_KEYBOARDS))
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all-avr),true)
+        KEYBOARD_RULE=all
+        REQUIRE_PLATFORM_KEY := avr
+        $$(eval $$(call PARSE_ALL_KEYBOARDS))
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all-chibios),true)
+        KEYBOARD_RULE=all
+        REQUIRE_PLATFORM_KEY := chibios
+        $$(eval $$(call PARSE_ALL_KEYBOARDS))
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all-arm_atsam),true)
+        KEYBOARD_RULE=all
+        REQUIRE_PLATFORM_KEY := arm_atsam
+        $$(eval $$(call PARSE_ALL_KEYBOARDS))
     else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,test),true)
         $$(eval $$(call PARSE_TEST))
     # If the rule starts with the name of a known keyboard, then continue
@@ -447,7 +460,7 @@ define PARSE_KEYMAP
     # Format it in bold
     KB_SP := $(BOLD)$$(KB_SP)$(NO_COLOR)
     # Specify the variables that we are passing forward to submake
-    MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM)
+    MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM) REQUIRE_PLATFORM_KEY=$$(REQUIRE_PLATFORM_KEY)
     # And the first part of the make command
     MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_keyboard.mk $$(MAKE_TARGET)
     # The message to display
@@ -466,6 +479,8 @@ define BUILD
         LOG=$$$$($$(MAKE_CMD) $$(MAKE_VARS) SILENT=true 2>&1) ; \
         if [ $$$$? -gt 0 ]; \
             then $$(PRINT_ERROR_PLAIN); \
+        elif [ "$$$$LOG" = "skipped" ] ; \
+            then $$(PRINT_SKIPPED_PLAIN); \
         elif [ "$$$$LOG" != "" ] ; \
             then $$(PRINT_WARNING_PLAIN); \
         else \
@@ -637,12 +652,13 @@ else
 endif
 ifndef SKIP_VERSION
 BUILD_DATE := $(shell date +"%Y-%m-%d-%H:%M:%S")
+else
+BUILD_DATE := 2020-01-01-00:00:00
+endif
+
 $(shell echo '#define QMK_VERSION "$(GIT_VERSION)"' > $(ROOT_DIR)/quantum/version.h)
 $(shell echo '#define QMK_BUILDDATE "$(BUILD_DATE)"' >> $(ROOT_DIR)/quantum/version.h)
 $(shell echo '#define CHIBIOS_VERSION "$(CHIBIOS_VERSION)"' >> $(ROOT_DIR)/quantum/version.h)
 $(shell echo '#define CHIBIOS_CONTRIB_VERSION "$(CHIBIOS_CONTRIB_VERSION)"' >> $(ROOT_DIR)/quantum/version.h)
-else
-BUILD_DATE := NA
-endif
 
 include $(ROOT_DIR)/testlist.mk

build_keyboard.mk

@@ -317,6 +317,13 @@ SRC += $(TMK_COMMON_SRC)
 OPT_DEFS += $(TMK_COMMON_DEFS)
 EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
 
+SKIP_COMPILE := no
+ifneq ($(REQUIRE_PLATFORM_KEY),)
+    ifneq ($(REQUIRE_PLATFORM_KEY),$(PLATFORM_KEY))
+        SKIP_COMPILE := yes
+    endif
+endif
+
 include $(TMK_PATH)/$(PLATFORM_KEY).mk
 ifneq ($(strip $(PROTOCOL)),)
     include $(TMK_PATH)/protocol/$(strip $(shell echo $(PROTOCOL) | tr '[:upper:]' '[:lower:]')).mk
@@ -352,7 +359,13 @@ $(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
 $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 
 # Default target.
+ifeq ($(SKIP_COMPILE),no)
 all: build check-size
+else
+all:
+	echo "skipped" >&2
+endif
+
 build: elf cpfirmware
 check-size: build
 objs-size: build

build_test.mk

@@ -49,6 +49,7 @@ endif
 
 include common_features.mk
 include $(TMK_PATH)/common.mk
+include $(QUANTUM_PATH)/sequencer/tests/rules.mk
 include $(QUANTUM_PATH)/serial_link/tests/rules.mk
 ifneq ($(filter $(FULL_TESTS),$(TEST)),)
 include build_full_test.mk

common.mk

@@ -21,4 +21,5 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
 COMMON_VPATH += $(QUANTUM_PATH)/audio
 COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
 COMMON_VPATH += $(QUANTUM_PATH)/api
+COMMON_VPATH += $(QUANTUM_PATH)/sequencer
 COMMON_VPATH += $(DRIVER_PATH)

common_features.mk

@@ -21,6 +21,11 @@ QUANTUM_SRC += \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
 
+ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), yes)
+    OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
+    CONSOLE_ENABLE = yes
+endif
+
 ifeq ($(strip $(API_SYSEX_ENABLE)), yes)
     OPT_DEFS += -DAPI_SYSEX_ENABLE
     OPT_DEFS += -DAPI_ENABLE
@@ -39,6 +44,13 @@ ifeq ($(strip $(AUDIO_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/audio/luts.c
 endif
 
+ifeq ($(strip $(SEQUENCER_ENABLE)), yes)
+    OPT_DEFS += -DSEQUENCER_ENABLE
+    MUSIC_ENABLE = yes
+    SRC += $(QUANTUM_DIR)/sequencer/sequencer.c
+    SRC += $(QUANTUM_DIR)/process_keycode/process_sequencer.c
+endif
+
 ifeq ($(strip $(MIDI_ENABLE)), yes)
     OPT_DEFS += -DMIDI_ENABLE
     MUSIC_ENABLE = yes
@@ -156,12 +168,14 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
-VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 IS31FL3741 WS2812 custom
 
 LED_MATRIX_ENABLE ?= no
-ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
-    ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
-        $(error LED_MATRIX_ENABLE="$(LED_MATRIX_ENABLE)" is not a valid matrix type)
+VALID_LED_MATRIX_TYPES := IS31FL3731 custom
+# TODO: IS31FL3733 IS31FL3737 IS31FL3741
+
+ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
+    ifeq ($(filter $(LED_MATRIX_DRIVER),$(VALID_LED_MATRIX_TYPES)),)
+        $(error LED_MATRIX_DRIVER="$(LED_MATRIX_DRIVER)" is not a valid matrix type)
     else
         BACKLIGHT_ENABLE = yes
         BACKLIGHT_DRIVER = custom
@@ -169,21 +183,22 @@ ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
         SRC += $(QUANTUM_DIR)/led_matrix.c
         SRC += $(QUANTUM_DIR)/led_matrix_drivers.c
     endif
-endif
 
-ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
-    OPT_DEFS += -DIS31FL3731
-    COMMON_VPATH += $(DRIVER_PATH)/issi
-    SRC += is31fl3731-simple.c
-    QUANTUM_LIB_SRC += i2c_master.c
+    ifeq ($(strip $(LED_MATRIX_DRIVER)), IS31FL3731)
+        OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
+        COMMON_VPATH += $(DRIVER_PATH)/issi
+        SRC += is31fl3731-simple.c
+        QUANTUM_LIB_SRC += i2c_master.c
+    endif
 endif
 
 RGB_MATRIX_ENABLE ?= no
+VALID_RGB_MATRIX_TYPES := IS31FL3731 IS31FL3733 IS31FL3737 IS31FL3741 WS2812 custom
 
-ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
-ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
-    $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
-endif
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
+    ifeq ($(filter $(RGB_MATRIX_DRIVER),$(VALID_RGB_MATRIX_TYPES)),)
+        $(error "$(RGB_MATRIX_DRIVER)" is not a valid matrix type)
+    endif
     OPT_DEFS += -DRGB_MATRIX_ENABLE
 ifneq (,$(filter $(MCU), atmega16u2 atmega32u2))
     # ATmegaxxU2 does not have hardware MUL instruction - lib8tion must be told to use software multiplication routines
@@ -194,51 +209,47 @@ endif
     SRC += $(QUANTUM_DIR)/rgb_matrix_drivers.c
     CIE1931_CURVE := yes
     RGB_KEYCODES_ENABLE := yes
-endif
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
-	RGB_MATRIX_ENABLE := IS31FL3731
-endif
+    ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3731)
+        OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
+        COMMON_VPATH += $(DRIVER_PATH)/issi
+        SRC += is31fl3731.c
+        QUANTUM_LIB_SRC += i2c_master.c
+    endif
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
-    OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
-    COMMON_VPATH += $(DRIVER_PATH)/issi
-    SRC += is31fl3731.c
-    QUANTUM_LIB_SRC += i2c_master.c
-endif
+    ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3733)
+        OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
+        COMMON_VPATH += $(DRIVER_PATH)/issi
+        SRC += is31fl3733.c
+        QUANTUM_LIB_SRC += i2c_master.c
+    endif
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
-    OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
-    COMMON_VPATH += $(DRIVER_PATH)/issi
-    SRC += is31fl3733.c
-    QUANTUM_LIB_SRC += i2c_master.c
-endif
+    ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3737)
+        OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
+        COMMON_VPATH += $(DRIVER_PATH)/issi
+        SRC += is31fl3737.c
+        QUANTUM_LIB_SRC += i2c_master.c
+    endif
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
-    OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
-    COMMON_VPATH += $(DRIVER_PATH)/issi
-    SRC += is31fl3737.c
-    QUANTUM_LIB_SRC += i2c_master.c
-endif
+    ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3741)
+        OPT_DEFS += -DIS31FL3741 -DSTM32_I2C -DHAL_USE_I2C=TRUE
+        COMMON_VPATH += $(DRIVER_PATH)/issi
+        SRC += is31fl3741.c
+        QUANTUM_LIB_SRC += i2c_master.c
+    endif
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3741)
-    OPT_DEFS += -DIS31FL3741 -DSTM32_I2C -DHAL_USE_I2C=TRUE
-    COMMON_VPATH += $(DRIVER_PATH)/issi
-    SRC += is31fl3741.c
-    QUANTUM_LIB_SRC += i2c_master.c
-endif
+    ifeq ($(strip $(RGB_MATRIX_DRIVER)), WS2812)
+        OPT_DEFS += -DWS2812
+        WS2812_DRIVER_REQUIRED := yes
+    endif
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812)
-    OPT_DEFS += -DWS2812
-    WS2812_DRIVER_REQUIRED := yes
-endif
+    ifeq ($(strip $(RGB_MATRIX_CUSTOM_KB)), yes)
+        OPT_DEFS += -DRGB_MATRIX_CUSTOM_KB
+    endif
 
-ifeq ($(strip $(RGB_MATRIX_CUSTOM_KB)), yes)
-    OPT_DEFS += -DRGB_MATRIX_CUSTOM_KB
-endif
-
-ifeq ($(strip $(RGB_MATRIX_CUSTOM_USER)), yes)
-    OPT_DEFS += -DRGB_MATRIX_CUSTOM_USER
+    ifeq ($(strip $(RGB_MATRIX_CUSTOM_USER)), yes)
+        OPT_DEFS += -DRGB_MATRIX_CUSTOM_USER
+    endif
 endif
 
 ifeq ($(strip $(RGB_KEYCODES_ENABLE)), yes)
@@ -444,11 +455,14 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
         # Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
         # Unused functions are pruned away, which is why we can add multiple drivers here without bloat.
         ifeq ($(PLATFORM),AVR)
-            QUANTUM_LIB_SRC += i2c_master.c \
-                               i2c_slave.c
+            ifneq ($(NO_I2C),yes)
+                QUANTUM_LIB_SRC += i2c_master.c \
+                                   i2c_slave.c
+            endif
         endif
 
         SERIAL_DRIVER ?= bitbang
+        OPT_DEFS += -DSERIAL_DRIVER_$(strip $(shell echo $(SERIAL_DRIVER) | tr '[:lower:]' '[:upper:]'))
         ifeq ($(strip $(SERIAL_DRIVER)), bitbang)
             QUANTUM_LIB_SRC += serial.c
         else

docs/ChangeLog/20201128.md

@@ -0,0 +1,150 @@
+# QMK Breaking Change - 2020 Nov 28 Changelog
+
+Four times a year QMK runs a process for merging Breaking Changes. A Breaking Change is any change which modifies how QMK behaves in a way that is incompatible or potentially dangerous. We limit these changes to 4 times per year so that users can have confidence that updating their QMK tree will not break their keymaps.
+
+
+## Changes Requiring User Action :id=changes-requiring-user-action
+
+### Relocated Keyboards :id-relocated-keyboards
+
+#### Reduce Helix keyboard build variation ([#8669](https://github.com/qmk/qmk_firmware/pull/8669))
+
+The build commands for the Helix keyboard are:
+
+```
+make <helix_build_name>:<keymap_name>
+```
+
+For `<helix_build_name>`, specify the one in the rightmost column of the table below, such as `helix`,` helix/pico`.
+
+| before Oct 17 2019   |  Oct 17 2019            | Mar 10 2020             | Nov 28 2020             |
+| ---------------------|-------------------------|-------------------------| ------------------------|
+| helix/rev1           | helix/rev1              | helix/rev1              | helix/rev1              |
+| helix/pico           | helix/pico              | helix/pico              | helix/pico              |
+|                      | helix/pico/back         | helix/pico/back         | helix/pico/back         |
+|                      | helix/pico/under        | helix/pico/under        | helix/pico/under        |
+|                      |                         | helix/pico/sc           | --                      |
+|                      |                         | helix/pico/sc/back      | helix/pico/sc           |
+|                      |                         | helix/pico/sc/under     | --                      |
+| helix/rev2 (=helix)  | helix/rev2 (=helix)     | helix/rev2 (=helix)     | --                      |
+|                      | helix/rev2/back         | helix/rev2/back         | --                      |
+|                      | helix/rev2/back/oled    | helix/rev2/back/oled    | ( --> helix/rev2/back)  |
+|                      | helix/rev2/oled         | helix/rev2/oled         | helix/rev2　(=helix)     |
+|                      | helix/rev2/oled/back    | helix/rev2/oled/back    | helix/rev2/back         |
+|                      | helix/rev2/oled/under   | helix/rev2/oled/under   | helix/rev2/under        |
+|                      |                         | helix/rev2/sc           | --                      |
+|                      |                         | helix/rev2/sc/back      | --                      |
+|                      |                         | helix/rev2/sc/oled      | --                      |
+|                      |                         | helix/rev2/sc/oledback  | helix/rev2/sc           |
+|                      |                         | helix/rev2/sc/oledunder | --                      |
+|                      |                         | helix/rev2/sc/under     | --                      |
+|                      | helix/rev2/under        | helix/rev2/under        | --                      |
+|                      | helix/rev2/under/oled   | helix/rev2/under/oled   | ( --> helix/rev2/under) |
+
+#### Update the Speedo firmware for v3.0 ([#10657](https://github.com/qmk/qmk_firmware/pull/10657))
+
+The Speedo keyboard has moved to `cozykeys/speedo/v2` as the designer prepares to release the Speedo v3.0.
+
+| Previous Name | New Name                   |
+| :------------ | :------------------------- |
+| speedo        | cozykeys/speedo/v2         |
+| --            | cozykeys/speedo/v3 **new** |
+
+#### Maartenwut/Maarten name change to evyd13/Evy ([#10274](https://github.com/qmk/qmk_firmware/pull/10274))
+
+Maartenwut has rebranded as @evyd13, and all released Maartenwut boards have moved.
+
+| Previous Name          | New Name           |
+| :--------------------- | :----------------- |
+| maartenwut/atom47/rev2 | evyd13/atom47/rev2 |
+| maartenwut/atom47/rev3 | evyd13/atom47/rev3 |
+| maartenwut/eon40       | evyd13/eon40       |
+| maartenwut/eon65       | evyd13/eon65       |
+| maartenwut/eon75       | evyd13/eon75       |
+| maartenwut/eon87       | evyd13/eon87       |
+| maartenwut/eon95       | evyd13/eon95       |
+| maartenwut/gh80_1800   | evyd13/gh80_1800   |
+| maartenwut/gh80_3700   | evyd13/gh80_3700   |
+| maartenwut/minitomic   | evyd13/minitomic   |
+| maartenwut/mx5160      | evyd13/mx5160      |
+| maartenwut/nt660       | evyd13/nt660       |
+| maartenwut/omrontkl    | evyd13/omrontkl    |
+| maartenwut/plain60     | evyd13/plain60     |
+| maartenwut/pockettype  | evyd13/pockettype  |
+| maartenwut/quackfire   | evyd13/quackfire   |
+| maartenwut/solheim68   | evyd13/solheim68   |
+| maartenwut/ta65        | evyd13/ta65        |
+| maartenwut/wasdat      | evyd13/wasdat      |
+| maartenwut/wasdat_code | evyd13/wasdat_code |
+| maartenwut/wonderland  | evyd13/wonderland  |
+
+#### Xelus Valor and Dawn60 Refactors ([#10512](https://github.com/qmk/qmk_firmware/pull/10512), [#10584](https://github.com/qmk/qmk_firmware/pull/10584))
+
+The Valor and Dawn60 keyboards by Xelus22 both now require their revisions to be specified when compiling.
+
+| Previous Name | New Name          |
+| :------------ | :---------------- |
+| xelus/dawn60  | xelus/dawn60/rev1 |
+| xelus/valor   | xelus/valor/rev1  |
+
+
+### Updated Keyboard Codebases :id=keyboard-updates
+
+#### AEboards EXT65 Refactor ([#10820](https://github.com/qmk/qmk_firmware/pull/10820))
+
+The EXT65 codebase has been reworked so keymaps can be used with either revision.
+
+
+## Core Changes :id=core-changes
+
+### Fixes :id=core-fixes
+
+* Reconnect the USB if users wake up a computer from the keyboard to restore the USB state ([#10088](https://github.com/qmk/qmk_firmware/pull/10088))
+* Fix cursor position bug in oled_write_raw functions ([#10800](https://github.com/qmk/qmk_firmware/pull/10800))
+
+### Additions and Enhancements :id=core-additions
+
+* Allow MATRIX_ROWS to be greater than 32 ([#10183](https://github.com/qmk/qmk_firmware/pull/10183))
+* Add support for soft serial to ATmega32U2 ([#10204](https://github.com/qmk/qmk_firmware/pull/10204))
+* Allow direct control of MIDI velocity value ([#9940](https://github.com/qmk/qmk_firmware/pull/9940))
+* Joystick 16-bit support ([#10439](https://github.com/qmk/qmk_firmware/pull/10439))
+* Allow encoder resolutions to be set per encoder ([#10259](https://github.com/qmk/qmk_firmware/pull/10259))
+* Share button state from mousekey to pointing_device ([#10179](https://github.com/qmk/qmk_firmware/pull/10179))
+* Add advanced/efficient RGB Matrix Indicators ([#8564](https://github.com/qmk/qmk_firmware/pull/8564))
+* OLED display update interval support ([#10388](https://github.com/qmk/qmk_firmware/pull/10388))
+* Per-Key Retro Tapping ([#10622](https://github.com/qmk/qmk_firmware/pull/10622))
+* Allow backlight duty cycle limit ([#10260](https://github.com/qmk/qmk_firmware/pull/10260))
+* Add step sequencer feature ([#9703](https://github.com/qmk/qmk_firmware/pull/9703))
+* Added `add_oneshot_mods` & `del_oneshot_mods` ([#10549](https://github.com/qmk/qmk_firmware/pull/10549))
+* Add AT90USB support for serial.c ([#10706](https://github.com/qmk/qmk_firmware/pull/10706))
+* Auto shift: support repeats and early registration (#9826)
+
+### Clean-ups and Optimizations :id=core-optimizations
+
+* Haptic and solenoid cleanup ([#9700](https://github.com/qmk/qmk_firmware/pull/9700))
+* XD75 cleanup ([#10524](https://github.com/qmk/qmk_firmware/pull/10524))
+* Minor change to behavior allowing display updates to continue between task ticks ([#10750](https://github.com/qmk/qmk_firmware/pull/10750))
+* Change some GPIO manipulations in matrix.c to be atomic ([#10491](https://github.com/qmk/qmk_firmware/pull/10491))
+* combine repeated lines of code for ATmega32U2, ATmega16U2, ATmega328 and ATmega328P ([#10837](https://github.com/qmk/qmk_firmware/pull/10837))
+* Remove references to HD44780 ([#10735](https://github.com/qmk/qmk_firmware/pull/10735))
+
+
+## QMK Infrastructure and Internals :id=qmk-internals
+
+* Add ability to build a subset of all keyboards based on platform. ([#10420](https://github.com/qmk/qmk_firmware/pull/10420))
+* Initialise EEPROM drivers at startup, instead of upon first execution ([#10438](https://github.com/qmk/qmk_firmware/pull/10438))
+* Make bootloader_jump weak for ChibiOS ([#10417](https://github.com/qmk/qmk_firmware/pull/10417))
+* Support for STM32 GPIOF,G,H,I,J,K ([#10206](https://github.com/qmk/qmk_firmware/pull/10206))
+* Add milc as a dependency and remove the installed milc ([#10563](https://github.com/qmk/qmk_firmware/pull/10563))
+* ChibiOS upgrade: early init conversions ([#10214](https://github.com/qmk/qmk_firmware/pull/10214))
+* ChibiOS upgrade: configuration file migrator ([#9952](https://github.com/qmk/qmk_firmware/pull/9952))
+* Add definition based on currently-selected serial driver. ([#10716](https://github.com/qmk/qmk_firmware/pull/10716))
+* Allow for modification of output RGB values when using rgblight/rgb_matrix. ([#10638](https://github.com/qmk/qmk_firmware/pull/10638))
+* Allow keyboards/keymaps to execute code at each main loop iteration ([#10530](https://github.com/qmk/qmk_firmware/pull/10530))
+* qmk cformat ([#10767](https://github.com/qmk/qmk_firmware/pull/10767))
+* Add a Make variable to easily enable DEBUG_MATRIX_SCAN_RATE on the command line ([#10824](https://github.com/qmk/qmk_firmware/pull/10824))
+* update Chibios OS USB for the OTG driver ([#8893](https://github.com/qmk/qmk_firmware/pull/8893))
+* Fixup version.h writing when using `SKIP_VERSION=yes` ([#10972](https://github.com/qmk/qmk_firmware/pull/10972), [#10974](https://github.com/qmk/qmk_firmware/pull/10974))
+* Rename ledmatrix.h to match .c file ([#7949](https://github.com/qmk/qmk_firmware/pull/7949))
+* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER ([#10231](https://github.com/qmk/qmk_firmware/pull/10231))
+* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER ([#10840](https://github.com/qmk/qmk_firmware/pull/10840))

docs/_summary.md

@@ -80,6 +80,7 @@
     * [One Shot Keys](one_shot_keys.md)
     * [Pointing Device](feature_pointing_device.md)
     * [Raw HID](feature_rawhid.md)
+    * [Sequencer](feature_sequencer.md)
     * [Swap Hands](feature_swap_hands.md)
     * [Tap Dance](feature_tap_dance.md)
     * [Tap-Hold Configuration](tap_hold.md)
@@ -119,6 +120,7 @@
     * [Overview](breaking_changes.md)
     * [My Pull Request Was Flagged](breaking_changes_instructions.md)
     * History
+      * [2020 Nov 28](ChangeLog/20201128.md)
       * [2020 Aug 29](ChangeLog/20200829.md)
       * [2020 May 30](ChangeLog/20200530.md)
       * [2020 Feb 29](ChangeLog/20200229.md)

docs/breaking_changes.md

@@ -6,6 +6,7 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## What has been included in past Breaking Changes?
 
+* [2020 Nov 28](ChangeLog/20201128.md)
 * [2020 Aug 29](ChangeLog/20200829.md)
 * [2020 May 30](ChangeLog/20200530.md)
 * [2020 Feb 29](ChangeLog/20200229.md)
@@ -13,16 +14,16 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for November 28, 2020.
+The next Breaking Change is scheduled for February 27, 2021.
 
 ### Important Dates
 
-* [x] 2020 Aug 29 - `develop` is created. It will be rebased weekly.
-* [ ] 2020 Oct 31 - `develop` closed to new PR's.
-* [ ] 2020 Oct 31 - Call for testers.
-* [ ] 2020 Nov 26 - `master` is locked, no PR's merged.
-* [ ] 2020 Nov 28 - Merge `develop` to `master`.
-* [ ] 2020 Nov 28 - `master` is unlocked. PR's can be merged again.
+* [x] 2020 Nov 28 - `develop` is created. Each push to `master` is subsequently merged to `develop`
+* [ ] 2021 Jan 30 - `develop` closed to new PR's.
+* [ ] 2021 Jan 30 - Call for testers.
+* [ ] 2021 Feb 25 - `master` is locked, no PR's merged.
+* [ ] 2021 Feb 27 - Merge `develop` to `master`.
+* [ ] 2021 Feb 27 - `master` is unlocked. PR's can be merged again.
 
 ## What changes will be included?
 
@@ -39,21 +40,6 @@ Criteria for acceptance:
 
 This section documents various processes we use when running the Breaking Changes process.
 
-## Rebase `develop` from `master`
-
-This is run every Friday while `develop` is open.
-
-Process:
-
-```
-cd qmk_firmware
-git checkout master
-git pull --ff-only
-git checkout develop
-git rebase master
-git push --force
-```
-
 ## Creating the `develop` branch
 
 This happens immediately after the previous `develop` branch is merged.

docs/config_options.md

@@ -135,6 +135,8 @@ If you define these options you will enable the associated feature, which may in
 * `#define RETRO_TAPPING`
   * tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release
   * See [Retro Tapping](tap_hold.md#retro-tapping) for details
+* `#define RETRO_TAPPING_PER_KEY`
+  * enables handling for per key `RETRO_TAPPING` settings
 * `#define TAPPING_TOGGLE 2`
   * how many taps before triggering the toggle
 * `#define PERMISSIVE_HOLD`

docs/custom_quantum_functions.md

@@ -185,6 +185,14 @@ This function gets called at every matrix scan, which is basically as often as t
 
 You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LEDs or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
 
+# Keyboard housekeeping
+
+* Keyboard/Revision: `void housekeeping_task_kb(void)`
+* Keymap: `void housekeeping_task_user(void)`
+
+This function gets called at the end of all QMK processing, before starting the next iteration. You can safely assume that QMK has dealt with the last matrix scan at the time that these functions are invoked -- layer states have been updated, USB reports have been sent, LEDs have been updated, and displays have been drawn.
+
+Similar to `matrix_scan_*`, these are called as often as the MCU can handle. To keep your board responsive, it's suggested to do as little as possible during these function calls, potentially throtting their behaviour if you do indeed require implementing something special.
 
 # Keyboard Idling/Wake Code
 

docs/feature_auto_shift.md

@@ -15,25 +15,31 @@ problem.
 When you tap a key, it stays depressed for a short period of time before it is
 then released. This depressed time is a different length for everyone. Auto Shift
 defines a constant `AUTO_SHIFT_TIMEOUT` which is typically set to twice your
-normal pressed state time. When you press a key, a timer starts and then stops
-when you release the key. If the time depressed is greater than or equal to the
-`AUTO_SHIFT_TIMEOUT`, then a shifted version of the key is emitted. If the time
-is less than the `AUTO_SHIFT_TIMEOUT` time, then the normal state is emitted.
+normal pressed state time. When you press a key, a timer starts, and if you
+have not released the key after the `AUTO_SHIFT_TIMEOUT` period, then a shifted
+version of the key is emitted. If the time is less than the `AUTO_SHIFT_TIMEOUT`
+time, or you press another key, then the normal state is emitted.
+
+If `AUTO_SHIFT_REPEAT` is defined, there is keyrepeat support. Holding the key
+down will repeat the shifted key, though this can be disabled with
+`AUTO_SHIFT_NO_AUTO_REPEAT`. If you want to repeat the normal key, then tap it
+once then immediately (within `TAPPING_TERM`) hold it down again (this works
+with the shifted value as well if auto-repeat is disabled).
 
 ## Are There Limitations to Auto Shift?
 
 Yes, unfortunately.
 
-1. Key repeat will cease to work. For example, before if you wanted 20 'a'
-   characters, you could press and hold the 'a' key for a second or two. This no
-   longer works with Auto Shift because it is timing your depressed time instead
-   of emitting a depressed key state to your operating system.
-2. You will have characters that are shifted when you did not intend on shifting, and
-   other characters you wanted shifted, but were not. This simply comes down to
-   practice. As we get in a hurry, we think we have hit the key long enough
-   for a shifted version, but we did not. On the other hand, we may think we are
-   tapping the keys, but really we have held it for a little longer than
-   anticipated.
+You will have characters that are shifted when you did not intend on shifting, and
+other characters you wanted shifted, but were not. This simply comes down to
+practice. As we get in a hurry, we think we have hit the key long enough for a
+shifted version, but we did not. On the other hand, we may think we are tapping
+the keys, but really we have held it for a little longer than anticipated.
+
+Additionally, with keyrepeat the desired shift state can get mixed up. It will
+always 'belong' to the last key pressed. For example, keyrepeating a capital
+and then tapping something lowercase (whether or not it's an Auto Shift key)
+will result in the capital's *key* still being held, but shift not.
 
 ## How Do I Enable Auto Shift?
 
@@ -103,6 +109,14 @@ Do not Auto Shift numeric keys, zero through nine.
 
 Do not Auto Shift alpha characters, which include A through Z.
 
+### AUTO_SHIFT_REPEAT (simple define)
+
+Enables keyrepeat.
+
+### AUTO_SHIFT_NO_AUTO_REPEAT (simple define)
+
+Disables automatically keyrepeating when `AUTO_SHIFT_TIMEOUT` is exceeded.
+
 ## Using Auto Shift Setup
 
 This will enable you to define three keys temporarily to increase, decrease and report your `AUTO_SHIFT_TIMEOUT`.

docs/feature_backlight.md

@@ -62,14 +62,15 @@ Valid driver values are `pwm`, `software`, `custom` or `no`. See below for help
 
 To configure the backlighting, `#define` these in your `config.h`:
 
-|Define               |Default      |Description                                                                          |
-|---------------------|-------------|-------------------------------------------------------------------------------------|
-|`BACKLIGHT_PIN`      |*Not defined*|The pin that controls the LED(s)                                                     |
-|`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 31 excluding off)                           |
-|`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)     |
-|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported                                             |
-|`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                      |
-|`BACKLIGHT_ON_STATE` |`1`          |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low|
+| Define                 | Default       | Description                                                                                                       |
+|------------------------|---------------|-------------------------------------------------------------------------------------------------------------------|
+| `BACKLIGHT_PIN`        | *Not defined* | The pin that controls the LED(s)                                                                                  |
+| `BACKLIGHT_LEVELS`     | `3`           | The number of brightness levels (maximum 31 excluding off)                                                        |
+| `BACKLIGHT_CAPS_LOCK`  | *Not defined* | Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                                  |
+| `BACKLIGHT_BREATHING`  | *Not defined* | Enable backlight breathing, if supported                                                                          |
+| `BREATHING_PERIOD`     | `6`           | The length of one backlight "breath" in seconds                                                                   |
+| `BACKLIGHT_ON_STATE`   | `1`           | The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low                             |
+| `BACKLIGHT_LIMIT_VAL ` | `255`         | The maximum duty cycle of the backlight -- `255` allows for full brightness, any lower will decrease the maximum. |
 
 Unless you are designing your own keyboard, you generally should not need to change the `BACKLIGHT_PIN` or `BACKLIGHT_ON_STATE`.
 

docs/feature_encoders.md

@@ -32,13 +32,20 @@ Additionally, the resolution, which defines how many pulses the encoder register
 #define ENCODER_RESOLUTION 4
 ```
 
+It can also be defined per-encoder, by instead defining:
+
+```c
+#define ENCODER_RESOLUTIONS { 4, 2 }
+```
+
 ## Split Keyboards
 
-If you are using different pinouts for the encoders on each half of a split keyboard, you can define the pinout for the right half like this:
+If you are using different pinouts for the encoders on each half of a split keyboard, you can define the pinout (and optionally, resolutions) for the right half like this:
 
 ```c
 #define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a }
 #define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b }
+#define ENCODER_RESOLUTIONS_RIGHT { 2, 4 }
 ```
 
 ## Callbacks

docs/feature_haptic_feedback.md

@@ -42,14 +42,21 @@ First you will need a build a circuit to drive the solenoid through a mosfet as
 [Wiring diagram provided by Adafruit](https://playground.arduino.cc/uploads/Learning/solenoid_driver.pdf)
 
 
-| Settings                 | Default       | Description                                           |
-|--------------------------|---------------|-------------------------------------------------------|
-|`SOLENOID_PIN`            | *Not defined* |Configures the pin that the Solenoid is connected to.  |
-|`SOLENOID_DEFAULT_DWELL`  | `12` ms       |Configures the default dwell time for the solenoid.    |
-|`SOLENOID_MIN_DWELL`      | `4` ms        |Sets the lower limit for the dwell.                    |
-|`SOLENOID_MAX_DWELL`      | `100` ms      |Sets the upper limit for the dwell.                    |
+| Settings                   | Default              | Description                                           |
+|----------------------------|----------------------|-------------------------------------------------------|
+|`SOLENOID_PIN`              | *Not defined*        |Configures the pin that the Solenoid is connected to.  |
+|`SOLENOID_DEFAULT_DWELL`    | `12` ms              |Configures the default dwell time for the solenoid.    |
+|`SOLENOID_MIN_DWELL`        | `4` ms               |Sets the lower limit for the dwell.                    |
+|`SOLENOID_MAX_DWELL`        | `100` ms             |Sets the upper limit for the dwell.                    |
+|`SOLENOID_DWELL_STEP_SIZE`  | `1` ms               |The step size to use when `HPT_DWL*` keycodes are sent |
+|`SOLENOID_DEFAULT_BUZZ`     | `0` (disabled)       |On HPT_RST buzz is set "on" if this is "1"             |
+|`SOLENOID_BUZZ_ACTUATED`    | `SOLENOID_MIN_DWELL` |Actuated-time when the solenoid is in buzz mode        |
+|`SOLENOID_BUZZ_NONACTUATED` | `SOLENOID_MIN_DWELL` |Non-Actuated-time when the solenoid is in buzz mode    |
 
-?> Dwell time is how long the "plunger" stays activated.  The dwell time changes how the solenoid sounds.
+* If solenoid buzz is off, then dwell time is how long the "plunger" stays activated. The dwell time changes how the solenoid sounds.
+* If solenoid buzz is on, then dwell time sets the length of the buzz, while `SOLENOID_BUZZ_ACTUATED` and `SOLENOID_BUZZ_NONACTUATED` set the (non-)actuation times withing the buzz period.
+* With the current implementation, for any of the above time settings, the precision of these settings may be affected by how fast the keyboard is able to scan the matrix.
+  Therefore, if the keyboards scanning routine is slow, it may be preferable to set `SOLENOID_DWELL_STEP_SIZE` to a value slightly smaller than the time it takes to scan the keyboard.
 
 Beware that some pins may be powered during bootloader (ie. A13 on the STM32F303 chip) and will result in the solenoid kept in the on state through the whole flashing process. This may overheat and damage the solenoid. If you find that the pin the solenoid is connected to is triggering the solenoid during bootloader/DFU, select another pin.
 

docs/feature_joystick.md

@@ -141,6 +141,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 }
 ```
 
+### Axis Resolution
+
+By default, the resolution of each axis is 8 bit, giving a range of -127 to +127. If you need higher precision, you can increase it by defining eg. `JOYSTICK_AXES_RESOLUTION 12` in your `config.h`. The resolution must be between 8 and 16.
+
+Note that the supported AVR MCUs have a 10-bit ADC, and 12-bit for most STM32 MCUs.
+
 ### Triggering Joystick Buttons
 
 Joystick buttons are normal Quantum keycodes, defined as `JS_BUTTON0` to `JS_BUTTON31`, depending on the number of buttons you have configured.

docs/feature_led_matrix.md

@@ -10,7 +10,8 @@ If you want to use RGB LED's you should use the [RGB Matrix Subsystem](feature_r
 
 There is basic support for addressable LED matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
 
-    LED_MATRIX_ENABLE = IS31FL3731
+    LED_MATRIX_ENABLE = yes
+    LED_MATRIX_DRIVER = IS31FL3731
     
 You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
 

docs/feature_mouse_keys.md

@@ -140,3 +140,7 @@ To use constant speed mode, you must at least define `MK_COMBINED` in your keyma
 ```c
 #define MK_COMBINED
 ```
+
+## Use with PS/2 Mouse and Pointing Device
+
+Mouse keys button state is shared with [PS/2 mouse](feature_ps2_mouse.md) and [pointing device](feature_pointing_device.md) so mouse keys button presses can be used for clicks and drags.

docs/feature_oled_driver.md

@@ -150,6 +150,7 @@ void oled_task_user(void) {
 |`OLED_IC`                  |`OLED_IC_SSD1306`|Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller.                                                       |
 |`OLED_COLUMN_OFFSET`       |`0`              |(SH1106 only.) Shift output to the right this many pixels.<br />Useful for 128x64 displays centered on a 132x64 SH1106 IC.|
 |`OLED_BRIGHTNESS`          |`255`            |The default brightness level of the OLED, from 0 to 255.                                                                  |
+|`OLED_UPDATE_INTERVAL`     |`0`              |Set the time interval for updating the OLED display in ms. This will improve the matrix scan rate.                        |
 
  ## 128x64 & Custom sized OLED Displays
 

docs/feature_rgb_matrix.md

@@ -11,7 +11,8 @@ If you want to use single color LED's you should use the [LED Matrix Subsystem](
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
 
 ```makefile
-RGB_MATRIX_ENABLE = IS31FL3731
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = IS31FL3731
 ```
 
 Configure the hardware via your `config.h`:
@@ -62,7 +63,8 @@ Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet]
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
 
 ```makefile
-RGB_MATRIX_ENABLE = IS31FL3733
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = IS31FL3733
 ```
 
 Configure the hardware via your `config.h`:
@@ -112,7 +114,8 @@ Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](
 There is basic support for addressable RGB matrix lighting with a WS2811/WS2812{a,b,c} addressable LED strand. To enable it, add this to your `rules.mk`:
 
 ```makefile
-RGB_MATRIX_ENABLE = WS2812
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
 ```
 
 Configure the hardware via your `config.h`:
@@ -482,6 +485,14 @@ void rgb_matrix_indicators_kb(void) {
 }
 ```
 
+In addition, there are the advanced indicator functions.  These are aimed at those with heavily customized displays, where rendering every LED per cycle is expensive.  Such as some of the "drashna" layouts.  This includes a special macro to help make this easier to use: `RGB_MATRIX_INDICATOR_SET_COLOR(i, r, g, b)`.
+
+```c
+void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+    RGB_MATRIX_INDICATOR_SET_COLOR(index, red, green, blue);
+}
+```
+
 ### Suspended state :id=suspended-state
 To use the suspend feature, make sure that `#define RGB_DISABLE_WHEN_USB_SUSPENDED true` is added to the `config.h` file. 
 

docs/feature_sequencer.md

@@ -0,0 +1,88 @@
+# Sequencer
+
+Since QMK has experimental support for MIDI, you can now turn your keyboard into a [step sequencer](https://en.wikipedia.org/wiki/Music_sequencer#Step_sequencers)!
+
+!> **IMPORTANT:** This feature is highly experimental, it has only been tested on a Planck EZ so far. Also, the scope will be limited to support the drum machine use-case to start with.
+
+## Enable the step sequencer
+
+Add the following line to your `rules.mk`:
+
+```make
+SEQUENCER_ENABLE = yes
+```
+
+By default the sequencer has 16 steps, but you can override this setting in your `config.h`:
+
+```c
+#define SEQUENCER_STEPS 32
+```
+
+## Tracks
+
+You can program up to 8 independent tracks with the step sequencer. Select the tracks you want to edit, enable or disable some steps, and start the sequence!
+
+## Resolutions
+
+While the tempo defines the absolute speed at which the sequencer goes through the steps, the resolution defines the granularity of these steps (from coarser to finer).
+
+|Resolution   |Description            |
+|----------   |-----------            |
+|`SQ_RES_2`   |Every other beat       |
+|`SQ_RES_2T`  |Every 1.5 beats        |
+|`SQ_RES_4`   |Every beat             |
+|`SQ_RES_4T`  |Three times per 2 beats|
+|`SQ_RES_8`   |Twice per beat         |
+|`SQ_RES_8T`  |Three times per beat   |
+|`SQ_RES_16`  |Four times per beat    |
+|`SQ_RES_16T` |Six times per beat     |
+|`SQ_RES_32`  |Eight times per beat   |
+
+## Keycodes
+
+|Keycode  |Description                                        |
+|-------  |-----------                                        |
+|`SQ_ON`  |Start the step sequencer                           |
+|`SQ_OFF` |Stop the step sequencer                            |
+|`SQ_TOG` |Toggle the step sequencer playback                 |
+|`SQ_SALL`|Enable all the steps                               |
+|`SQ_SCLR`|Disable all the steps                              |
+|`SQ_S(n)`|Toggle the step `n`                                |
+|`SQ_TMPD`|Decrease the tempo                                 |
+|`SQ_TMPU`|Increase the tempo                                 |
+|`SQ_R(n)`|Set the resolution to n                            |
+|`SQ_RESD`|Change to the slower resolution                    |
+|`SQ_RESU`|Change to the faster resolution                    |
+|`SQ_T(n)`|Set `n` as the only active track or deactivate all |
+
+## Functions
+
+|Function                                                             |Description                                            |
+|--------                                                             |-----------                                            |
+|`bool is_sequencer_on(void);`                                        |Return whether the sequencer is playing                |
+|`void sequencer_toggle(void);`                                       |Toggle the step sequencer playback                     |
+|`void sequencer_on(void);`                                           |Start the step sequencer                               |
+|`void sequencer_off(void);`                                          |Stop the step sequencer                                |
+|`bool is_sequencer_step_on(uint8_t step);`                           |Return whether the step is currently enabled           |
+|`void sequencer_set_step(uint8_t step, bool value);`                 |Enable or disable the step                             |
+|`void sequencer_set_step_on();`                                      |Enable the step                                        |
+|`void sequencer_set_step_off();`                                     |Disable the step                                       |
+|`void sequencer_toggle_step(uint8_t step);`                          |Toggle the step                                        |
+|`void sequencer_set_all_steps(bool value);`                          |Enable or disable all the steps                        |
+|`void sequencer_set_all_steps_on();`                                 |Enable all the steps                                   |
+|`void sequencer_set_all_steps_off();`                                |Disable all the steps                                  |
+|`uint8_t sequencer_get_tempo(void);`                                 |Return the current tempo                               |
+|`void sequencer_set_tempo(uint8_t tempo);`                           |Set the tempo to `tempo` (between 1 and 255)           |
+|`void sequencer_increase_tempo(void);`                               |Increase the tempo                                     |
+|`void sequencer_decrease_tempo(void);`                               |Decrease the tempo                                     |
+|`sequencer_resolution_t sequencer_get_resolution(void);`             |Return the current resolution                          |
+|`void sequencer_set_resolution(sequencer_resolution_t resolution);`  |Set the resolution to `resolution`                     |
+|`void sequencer_increase_resolution(void);`                          |Change to the faster resolution                        |
+|`void sequencer_decrease_resolution(void);`                          |Change to the slower resolution                        |
+|`bool is_sequencer_track_active(uint8_t track);`                     |Return whether the track is active                     |
+|`void sequencer_set_track_activation(uint8_t track, bool value);`    |Activate or deactivate the `track`                     |
+|`void sequencer_toggle_track_activation(uint8_t track);`             |Toggle the `track`                                     |
+|`void sequencer_activate_track(uint8_t track);`                      |Activate the `track`                                   |
+|`void sequencer_deactivate_track(uint8_t track);`                    |Deactivate the `track`                                 |
+|`void sequencer_toggle_single_active_track(uint8_t track);`          |Set `track` as the only active track or deactivate all |
+

docs/feature_split_keyboard.md

@@ -237,6 +237,26 @@ This sets the maximum timeout when detecting master/slave when using `SPLIT_USB_
 ```
 This sets the poll frequency when detecting master/slave when using `SPLIT_USB_DETECT`
 
+## Hardware Considerations and Mods
+
+While most any Pro Micro can be used, micro controllers like the AVR Teensys and most (if not all) ARM boards require the Split USB Detect.
+
+However, with the Teensy 2.0 and Teensy++ 2.0, there is a simple hardware mod that you can perform to add VBUS detection, so you don't need the Split USB detection option.
+
+You'll only need a few things:
+
+* A knife (x-acto knife, ideally)
+* A solder station or hot air station
+* An appropriate Schottky diode, such as the [PMEG2005EH](https://www.digikey.com/en/products/detail/nexperia-usa-inc/PMEG2005EH,115/1589924)
+
+You'll need to cut the small trace between the 5V and center pads on the back of the Teensy.
+
+Once you have done that, you will want to solder the diode from the 5V pad to the center pad.
+
+You may need to use the 5V pad from the regulator block above as the pads were too small and placed too closely together to place the Schottky diode properly.
+
+![Teensy++ 2.0](https://i.imgur.com/BPEC5n5.png)
+
 ## Additional Resources
 
 Nicinabox has a [very nice and detailed guide](https://github.com/nicinabox/lets-split-guide) for the Let's Split keyboard, that covers most everything you need to know, including troubleshooting information. 

docs/internals_gpio_control.md

@@ -21,3 +21,22 @@ The following functions can provide basic control of GPIOs and are found in `qua
 ## Advanced Settings :id=advanced-settings
 
 Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
+
+## Atomic Operation
+
+The above functions are not always guaranteed to work atomically. Therefore, if you want to prevent interruptions in the middle of operations when using multiple combinations of the above functions, use the following `ATOMIC_BLOCK_FORCEON` macro.
+
+eg.
+```c
+void some_function() {
+     // some process
+     ATOMIC_BLOCK_FORCEON {
+        // Atomic Processing
+     }
+     // some process
+}
+```
+
+`ATOMIC_BLOCK_FORCEON` forces interrupts to be disabled before the block is executed, without regard to whether they are enabled or disabled. Then, after the block is executed, the interrupt is enabled.
+
+Note that `ATOMIC_BLOCK_FORCEON` can therefore be used if you know that interrupts are enabled before the execution of the block, or if you know that it is OK to enable interrupts at the completion of the block.

docs/ja/feature_led_matrix.md

@@ -15,7 +15,8 @@ RGB LED を使いたい場合は、代わりに [RGB マトリックスサブシ
 
 I2C IS31FL3731 RGB コントローラを使ったアドレス指定可能な LED マトリックスライトのための基本的なサポートがあります:有効にするには、`rules.mk` に以下を追加します:
 
-    LED_MATRIX_ENABLE = IS31FL3731
+    LED_MATRIX_ENABLE = yes
+    LED_MATRIX_DRIVER = IS31FL3731
 
 1から4個の IS31FL3731 IC を使うことができます。キーボード上に存在しない IC の `LED_DRIVER_ADDR_<N>` 定義を指定しないでください。`config.h` に以下の項目を定義することができます:
 

docs/newbs_getting_started.md

@@ -60,9 +60,12 @@ After Homebrew is installed run this command:
 
 You will need to install Git and Python. It's very likely that you already have both, but if not, one of the following commands should install them:
 
-* Debian / Ubuntu / Devuan: `sudo apt install git python3 python3-pip`
-* Fedora / Red Hat / CentOS: `sudo yum install git python3 python3-pip`
-* Arch / Manjaro: `sudo pacman -S git python python-pip python-setuptools libffi`
+* Debian / Ubuntu / Devuan: `sudo apt install -y git python3-pip`
+* Fedora / Red Hat / CentOS: `sudo yum -y install git python3-pip`
+* Arch / Manjaro: `sudo pacman --needed --noconfirm -S git python-pip libffi`
+* Void: `sudo xbps-install -y git python3-pip`
+* Solus: `sudo eopkg -y install git python3`
+* Sabayon: `sudo equo install dev-vcs/git dev-python/pip`
 
 Install the global CLI to bootstrap your system:
 

docs/one_shot_keys.md

@@ -22,7 +22,7 @@ Sometimes, you want to activate a one-shot key as part of a macro or tap dance r
 
 For one shot layers, you need to call `set_oneshot_layer(LAYER, ONESHOT_START)` on key down, and `clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED)` on key up. If you want to cancel the oneshot, call `reset_oneshot_layer()`.
 
-For one shot mods, you need to call `set_oneshot_mods(MOD)` to set it, or `clear_oneshot_mods()` to cancel it.
+For one shot mods, you need to call `set_oneshot_mods(MOD_BIT(KC_*))` to set it, or `clear_oneshot_mods()` to cancel it.
 
 !> If you're having issues with OSM translating over Remote Desktop Connection, this can be fixed by opening the settings, going to the "Local Resources" tap, and in the keyboard section, change the drop down to "On this Computer".  This will fix the issue and allow OSM to function properly over Remote Desktop.
 

docs/tap_hold.md

@@ -179,6 +179,25 @@ Holding and releasing a dual function key without pressing another key will resu
 
 For instance, holding and releasing `LT(2, KC_SPACE)` without hitting another key will result in nothing happening. With this enabled, it will send `KC_SPACE` instead.
 
+For more granular control of this feature, you can add the following to your `config.h`:
+
+```c
+#define RETRO_TAPPING_PER_KEY
+```
+
+You can then add the following function to your keymap:
+
+```c
+bool get_retro_tapping(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LT(2, KC_SPACE):
+            return true;
+        default:
+            return false;
+    }
+}
+```
+
 ## Why do we include the key record for the per key functions?
 
 One thing that you may notice is that we include the key record for all of the "per key" functions, and may be wondering why we do that.

drivers/avr/serial.c

@@ -20,50 +20,111 @@
 
 #ifdef SOFT_SERIAL_PIN
 
-#    ifdef __AVR_ATmega32U4__
-// if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
-#        ifdef USE_AVR_I2C
-#            if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
-#                error Using ATmega32U4 I2C, so can not use PD0, PD1
-#            endif
+#    if !(defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
+#        error serial.c is not supported for the currently selected MCU
+#    endif
+// if using ATmega32U4/2, AT90USBxxx I2C, can not use PD0 and PD1 in soft serial.
+#    if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
+#        if defined(USE_AVR_I2C) && (SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1)
+#            error Using I2C, so can not use PD0, PD1
 #        endif
+#    endif
+// PD0..PD3, common config
+#    if SOFT_SERIAL_PIN == D0
+#        define EIMSK_BIT _BV(INT0)
+#        define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
+#        define SERIAL_PIN_INTERRUPT INT0_vect
+#        define EICRx EICRA
+#    elif SOFT_SERIAL_PIN == D1
+#        define EIMSK_BIT _BV(INT1)
+#        define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
+#        define SERIAL_PIN_INTERRUPT INT1_vect
+#        define EICRx EICRA
+#    elif SOFT_SERIAL_PIN == D2
+#        define EIMSK_BIT _BV(INT2)
+#        define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
+#        define SERIAL_PIN_INTERRUPT INT2_vect
+#        define EICRx EICRA
+#    elif SOFT_SERIAL_PIN == D3
+#        define EIMSK_BIT _BV(INT3)
+#        define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
+#        define SERIAL_PIN_INTERRUPT INT3_vect
+#        define EICRx EICRA
+#    endif
 
-#        define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
-#        define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
-#        define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
-#        define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
-#        define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
+// ATmegaxxU2 specific config
+#    if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)
+// PD4(INT5), PD6(INT6), PD7(INT7), PC7(INT4)
+#        if SOFT_SERIAL_PIN == D4
+#            define EIMSK_BIT _BV(INT5)
+#            define EICRx_BIT (~(_BV(ISC50) | _BV(ISC51)))
+#            define SERIAL_PIN_INTERRUPT INT5_vect
+#            define EICRx EICRB
+#        elif SOFT_SERIAL_PIN == D6
+#            define EIMSK_BIT _BV(INT6)
+#            define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
+#            define SERIAL_PIN_INTERRUPT INT6_vect
+#            define EICRx EICRB
+#        elif SOFT_SERIAL_PIN == D7
+#            define EIMSK_BIT _BV(INT7)
+#            define EICRx_BIT (~(_BV(ISC70) | _BV(ISC71)))
+#            define SERIAL_PIN_INTERRUPT INT7_vect
+#            define EICRx EICRB
+#        elif SOFT_SERIAL_PIN == C7
+#            define EIMSK_BIT _BV(INT4)
+#            define EICRx_BIT (~(_BV(ISC40) | _BV(ISC41)))
+#            define SERIAL_PIN_INTERRUPT INT4_vect
+#            define EICRx EICRB
+#        endif
+#    endif
 
-#        if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
-#            if SOFT_SERIAL_PIN == D0
-#                define EIMSK_BIT _BV(INT0)
-#                define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
-#                define SERIAL_PIN_INTERRUPT INT0_vect
-#            elif SOFT_SERIAL_PIN == D1
-#                define EIMSK_BIT _BV(INT1)
-#                define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
-#                define SERIAL_PIN_INTERRUPT INT1_vect
-#            elif SOFT_SERIAL_PIN == D2
-#                define EIMSK_BIT _BV(INT2)
-#                define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
-#                define SERIAL_PIN_INTERRUPT INT2_vect
-#            elif SOFT_SERIAL_PIN == D3
-#                define EIMSK_BIT _BV(INT3)
-#                define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
-#                define SERIAL_PIN_INTERRUPT INT3_vect
-#            endif
+// ATmegaxxU4 specific config
+#    if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)
+// PE6(INT6)
+#        if SOFT_SERIAL_PIN == E6
+#            define EIMSK_BIT _BV(INT6)
+#            define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
+#            define SERIAL_PIN_INTERRUPT INT6_vect
+#            define EICRx EICRB
+#        endif
+#    endif
+
+// AT90USBxxx specific config
+#    if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
+// PE4..PE7(INT4..INT7)
+#        if SOFT_SERIAL_PIN == E4
+#            define EIMSK_BIT _BV(INT4)
+#            define EICRx_BIT (~(_BV(ISC40) | _BV(ISC41)))
+#            define SERIAL_PIN_INTERRUPT INT4_vect
+#            define EICRx EICRB
+#        elif SOFT_SERIAL_PIN == E5
+#            define EIMSK_BIT _BV(INT5)
+#            define EICRx_BIT (~(_BV(ISC50) | _BV(ISC51)))
+#            define SERIAL_PIN_INTERRUPT INT5_vect
+#            define EICRx EICRB
 #        elif SOFT_SERIAL_PIN == E6
 #            define EIMSK_BIT _BV(INT6)
 #            define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
 #            define SERIAL_PIN_INTERRUPT INT6_vect
-#        else
-#            error invalid SOFT_SERIAL_PIN value
+#            define EICRx EICRB
+#        elif SOFT_SERIAL_PIN == E7
+#            define EIMSK_BIT _BV(INT7)
+#            define EICRx_BIT (~(_BV(ISC70) | _BV(ISC71)))
+#            define SERIAL_PIN_INTERRUPT INT7_vect
+#            define EICRx EICRB
 #        endif
-
-#    else
-#        error serial.c now support ATmega32U4 only
 #    endif
 
+#    ifndef SERIAL_PIN_INTERRUPT
+#        error invalid SOFT_SERIAL_PIN value
+#    endif
+
+#    define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
+#    define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
+#    define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
+#    define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
+#    define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
+
 #    define ALWAYS_INLINE __attribute__((always_inline))
 #    define NO_INLINE __attribute__((noinline))
 #    define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
@@ -210,15 +271,9 @@ void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) {
     Transaction_table_size = (uint8_t)sstd_table_size;
     serial_input_with_pullup();
 
-    // Enable INT0-INT3,INT6
+    // Enable INT0-INT7
     EIMSK |= EIMSK_BIT;
-#    if SOFT_SERIAL_PIN == E6
-    // Trigger on falling edge of INT6
-    EICRB &= EICRx_BIT;
-#    else
-    // Trigger on falling edge of INT0-INT3
-    EICRA &= EICRx_BIT;
-#    endif
+    EICRx &= EICRx_BIT;
 }
 
 // Used by the sender to synchronize timing with the reciver.

drivers/chibios/i2c_master.c

@@ -58,18 +58,23 @@ static i2c_status_t chibios_to_qmk(const msg_t* status) {
 }
 
 __attribute__((weak)) void i2c_init(void) {
-    // Try releasing special pins for a short time
-    palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
-    palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
+    static bool is_initialised = false;
+    if (!is_initialised) {
+        is_initialised = true;
 
-    chThdSleepMilliseconds(10);
+        // Try releasing special pins for a short time
+        palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
+        palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
+
+        chThdSleepMilliseconds(10);
 #if defined(USE_GPIOV1)
-    palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, I2C1_SCL_PAL_MODE);
-    palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, I2C1_SDA_PAL_MODE);
+        palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, I2C1_SCL_PAL_MODE);
+        palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, I2C1_SDA_PAL_MODE);
 #else
-    palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-    palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+        palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+        palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
 #endif
+    }
 }
 
 i2c_status_t i2c_start(uint8_t address) {

drivers/chibios/spi_master.c

@@ -22,21 +22,26 @@ static pin_t     currentSlavePin = NO_PIN;
 static SPIConfig spiConfig       = {false, NULL, 0, 0, 0, 0};
 
 __attribute__((weak)) void spi_init(void) {
-    // Try releasing special pins for a short time
-    palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_INPUT);
-    palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_INPUT);
-    palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_INPUT);
+    static bool is_initialised = false;
+    if (!is_initialised) {
+        is_initialised = true;
 
-    chThdSleepMilliseconds(10);
+        // Try releasing special pins for a short time
+        palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_INPUT);
+        palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_INPUT);
+        palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_INPUT);
+
+        chThdSleepMilliseconds(10);
 #if defined(USE_GPIOV1)
-    palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
-    palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
-    palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+        palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+        palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+        palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
 #else
-    palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
-    palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
-    palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+        palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+        palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+        palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
 #endif
+    }
 }
 
 bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {

drivers/eeprom/eeprom_i2c.c

@@ -42,14 +42,6 @@
 #    include "debug.h"
 #endif  // DEBUG_EEPROM_OUTPUT
 
-static inline void init_i2c_if_required(void) {
-    static int done = 0;
-    if (!done) {
-        i2c_init();
-        done = 1;
-    }
-}
-
 static inline void fill_target_address(uint8_t *buffer, const void *addr) {
     uintptr_t p = (uintptr_t)addr;
     for (int i = 0; i < EXTERNAL_EEPROM_ADDRESS_SIZE; ++i) {
@@ -58,7 +50,7 @@ static inline void fill_target_address(uint8_t *buffer, const void *addr) {
     }
 }
 
-void eeprom_driver_init(void) {}
+void eeprom_driver_init(void) { i2c_init(); }
 
 void eeprom_driver_erase(void) {
 #if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
@@ -80,7 +72,6 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
     uint8_t complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE];
     fill_target_address(complete_packet, addr);
 
-    init_i2c_if_required();
     i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100);
     i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), buf, len, 100);
 
@@ -98,7 +89,6 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
     uint8_t * read_buf    = (uint8_t *)buf;
     uintptr_t target_addr = (uintptr_t)addr;
 
-    init_i2c_if_required();
     while (len > 0) {
         uintptr_t page_offset  = target_addr % EXTERNAL_EEPROM_PAGE_SIZE;
         int       write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset;

drivers/eeprom/eeprom_spi.c

@@ -55,14 +55,6 @@
 #    include "debug.h"
 #endif  // CONSOLE_ENABLE
 
-static void init_spi_if_required(void) {
-    static int done = 0;
-    if (!done) {
-        spi_init();
-        done = 1;
-    }
-}
-
 static bool spi_eeprom_start(void) { return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR); }
 
 static spi_status_t spi_eeprom_wait_while_busy(int timeout) {
@@ -91,7 +83,7 @@ static void spi_eeprom_transmit_address(uintptr_t addr) {
 
 //----------------------------------------------------------------------------------------------------------------------
 
-void eeprom_driver_init(void) {}
+void eeprom_driver_init(void) { spi_init(); }
 
 void eeprom_driver_erase(void) {
 #if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
@@ -110,8 +102,6 @@ void eeprom_driver_erase(void) {
 }
 
 void eeprom_read_block(void *buf, const void *addr, size_t len) {
-    init_spi_if_required();
-
     //-------------------------------------------------
     // Wait for the write-in-progress bit to be cleared
     bool res = spi_eeprom_start();
@@ -154,8 +144,6 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
 }
 
 void eeprom_write_block(const void *buf, void *addr, size_t len) {
-    init_spi_if_required();
-
     bool      res;
     uint8_t * read_buf    = (uint8_t *)buf;
     uintptr_t target_addr = (uintptr_t)addr;

drivers/haptic/haptic.c

@@ -33,11 +33,18 @@ void haptic_init(void) {
         eeconfig_init();
     }
     haptic_config.raw = eeconfig_read_haptic();
-    if (haptic_config.mode < 1) {
-        haptic_config.mode = 1;
-    }
-    if (!haptic_config.mode) {
-        dprintf("No haptic config found in eeprom, setting default configs\n");
+#ifdef SOLENOID_ENABLE
+    solenoid_set_dwell(haptic_config.dwell);
+#endif
+    if ((haptic_config.raw == 0)
+#ifdef SOLENOID_ENABLE
+        || (haptic_config.dwell == 0)
+#endif
+    ) {
+        // this will be called, if the eeprom is not corrupt,
+        // but the previous firmware didn't have haptic enabled,
+        // or the previous firmware didn't have solenoid enabled,
+        // and the current one has solenoid enabled.
         haptic_reset();
     }
 #ifdef SOLENOID_ENABLE
@@ -118,25 +125,37 @@ void haptic_mode_decrease(void) {
 }
 
 void haptic_dwell_increase(void) {
-    uint8_t dwell = haptic_config.dwell + 1;
 #ifdef SOLENOID_ENABLE
+    int16_t next_dwell = ((int16_t)haptic_config.dwell) + SOLENOID_DWELL_STEP_SIZE;
     if (haptic_config.dwell >= SOLENOID_MAX_DWELL) {
-        dwell = 1;
+        // if it's already at max, we wrap back to min
+        next_dwell = SOLENOID_MIN_DWELL;
+    } else if (next_dwell > SOLENOID_MAX_DWELL) {
+        // if we overshoot the max, then cap at max
+        next_dwell = SOLENOID_MAX_DWELL;
     }
-    solenoid_set_dwell(dwell);
+    solenoid_set_dwell(next_dwell);
+#else
+    int16_t next_dwell = ((int16_t)haptic_config.dwell) + 1;
 #endif
-    haptic_set_dwell(dwell);
+    haptic_set_dwell(next_dwell);
 }
 
 void haptic_dwell_decrease(void) {
-    uint8_t dwell = haptic_config.dwell - 1;
 #ifdef SOLENOID_ENABLE
-    if (haptic_config.dwell < SOLENOID_MIN_DWELL) {
-        dwell = SOLENOID_MAX_DWELL;
+    int16_t next_dwell = ((int16_t)haptic_config.dwell) - SOLENOID_DWELL_STEP_SIZE;
+    if (haptic_config.dwell <= SOLENOID_MIN_DWELL) {
+        // if it's already at min, we wrap to max
+        next_dwell = SOLENOID_MAX_DWELL;
+    } else if (next_dwell < SOLENOID_MIN_DWELL) {
+        // if we go below min, then we cap to min
+        next_dwell = SOLENOID_MIN_DWELL;
     }
-    solenoid_set_dwell(dwell);
+    solenoid_set_dwell(next_dwell);
+#else
+    int16_t next_dwell = ((int16_t)haptic_config.dwell) - 1;
 #endif
-    haptic_set_dwell(dwell);
+    haptic_set_dwell(next_dwell);
 }
 
 void haptic_reset(void) {
@@ -150,6 +169,12 @@ void haptic_reset(void) {
 #ifdef SOLENOID_ENABLE
     uint8_t dwell       = SOLENOID_DEFAULT_DWELL;
     haptic_config.dwell = dwell;
+    haptic_config.buzz  = SOLENOID_DEFAULT_BUZZ;
+    solenoid_set_dwell(dwell);
+#else
+    // This is to trigger haptic_reset again, if solenoid is enabled in the future.
+    haptic_config.dwell = 0;
+    haptic_config.buzz  = 0;
 #endif
     eeconfig_update_haptic(haptic_config.raw);
     xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);

drivers/haptic/solenoid.c

@@ -32,14 +32,6 @@ void solenoid_buzz_off(void) { haptic_set_buzz(0); }
 
 void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); }
 
-void solenoid_dwell_minus(uint8_t solenoid_dwell) {
-    if (solenoid_dwell > 0) solenoid_dwell--;
-}
-
-void solenoid_dwell_plus(uint8_t solenoid_dwell) {
-    if (solenoid_dwell < SOLENOID_MAX_DWELL) solenoid_dwell++;
-}
-
 void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; }
 
 void solenoid_stop(void) {
@@ -73,7 +65,7 @@ void solenoid_check(void) {
 
     // Check whether to buzz the solenoid on and off
     if (haptic_config.buzz) {
-        if (elapsed / SOLENOID_MIN_DWELL % 2 == 0) {
+        if ((elapsed % (SOLENOID_BUZZ_ACTUATED + SOLENOID_BUZZ_NONACTUATED)) < SOLENOID_BUZZ_ACTUATED) {
             if (!solenoid_buzzing) {
                 solenoid_buzzing = true;
                 writePinHigh(SOLENOID_PIN);

drivers/haptic/solenoid.h

@@ -29,6 +29,22 @@
 #    define SOLENOID_MIN_DWELL 4
 #endif
 
+#ifndef SOLENOID_DWELL_STEP_SIZE
+#    define SOLENOID_DWELL_STEP_SIZE 1
+#endif
+
+#ifndef SOLENOID_DEFAULT_BUZZ
+#    define SOLENOID_DEFAULT_BUZZ 0
+#endif
+
+#ifndef SOLENOID_BUZZ_ACTUATED
+#    define SOLENOID_BUZZ_ACTUATED SOLENOID_MIN_DWELL
+#endif
+
+#ifndef SOLENOID_BUZZ_NONACTUATED
+#    define SOLENOID_BUZZ_NONACTUATED SOLENOID_MIN_DWELL
+#endif
+
 #ifndef SOLENOID_PIN
 #    error SOLENOID_PIN not defined
 #endif
@@ -37,8 +53,6 @@ void solenoid_buzz_on(void);
 void solenoid_buzz_off(void);
 void solenoid_set_buzz(int buzz);
 
-void solenoid_dwell_minus(uint8_t solenoid_dwell);
-void solenoid_dwell_plus(uint8_t solenoid_dwell);
 void solenoid_set_dwell(uint8_t dwell);
 
 void solenoid_stop(void);

drivers/oled/oled_driver.c

@@ -119,6 +119,9 @@ uint32_t oled_timeout;
 #if OLED_SCROLL_TIMEOUT > 0
 uint32_t oled_scroll_timeout;
 #endif
+#if OLED_UPDATE_INTERVAL > 0
+uint16_t oled_update_timeout;
+#endif
 
 // Internal variables to reduce math instructions
 
@@ -468,8 +471,9 @@ void oled_write_raw_byte(const char data, uint16_t index) {
 }
 
 void oled_write_raw(const char *data, uint16_t size) {
-    if (size > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE;
-    for (uint16_t i = 0; i < size; i++) {
+    uint16_t cursor_start_index = oled_cursor - &oled_buffer[0];
+    if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index;
+    for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) {
         if (oled_buffer[i] == data[i]) continue;
         oled_buffer[i] = data[i];
         oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
@@ -511,8 +515,9 @@ void oled_write_ln_P(const char *data, bool invert) {
 }
 
 void oled_write_raw_P(const char *data, uint16_t size) {
-    if (size > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE;
-    for (uint16_t i = 0; i < size; i++) {
+    uint16_t cursor_start_index = oled_cursor - &oled_buffer[0];
+    if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index;
+    for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) {
         uint8_t c = pgm_read_byte(data++);
         if (oled_buffer[i] == c) continue;
         oled_buffer[i] = c;
@@ -650,9 +655,16 @@ void oled_task(void) {
         return;
     }
 
+#if OLED_UPDATE_INTERVAL > 0
+    if (timer_elapsed(oled_update_timeout) >= OLED_UPDATE_INTERVAL) {
+        oled_update_timeout = timer_read();
+        oled_set_cursor(0, 0);
+        oled_task_user();
+    }
+#else
     oled_set_cursor(0, 0);
-
     oled_task_user();
+#endif
 
 #if OLED_SCROLL_TIMEOUT > 0
     if (oled_dirty && oled_scrolling) {

drivers/ugfx/gdisp/st7565/board_st7565_template.h

@@ -8,8 +8,9 @@
 #ifndef _GDISP_LLD_BOARD_H
 #define _GDISP_LLD_BOARD_H
 
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9  // actually 6
-#define ST7565_ADC ST7565_ADC_NORMAL
+#include "quantum.h"
+
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
 #define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
 #define ST7565_PAGE_ORDER 0, 1, 2, 3
 /*
@@ -17,19 +18,12 @@
  * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
  */
 
-#define ST7565_GPIOPORT GPIOC
-#define ST7565_PORT PORTC
-#define ST7565_A0_PIN 7
-#define ST7565_RST_PIN 8
-#define ST7565_MOSI_PIN 6
-#define ST7565_SLCK_PIN 5
-#define ST7565_SS_PIN 4
+#define ST7565_A0_PIN C7
+#define ST7565_RST_PIN C8
+#define ST7565_MOSI_PIN C6
+#define ST7565_SCLK_PIN C5
+#define ST7565_SS_PIN C4
 
-#define palSetPadModeRaw(portname, bits) ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
-
-#define palSetPadModeNamed(portname, portmode) palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
-
-#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
 // DSPI Clock and Transfer Attributes
 // Frame Size: 8 bits
 // MSB First
@@ -38,9 +32,9 @@ static const SPIConfig spi1config = {
     // Operation complete callback or @p NULL.
     .end_cb = NULL,
     // The chip select line port - when not using pcs.
-    .ssport = ST7565_GPIOPORT,
+    .ssport = PAL_PORT(ST7565_SS_PIN),
     // brief The chip select line pad number - when not using pcs.
-    .sspad = ST7565_SS_PIN,
+    .sspad = PAL_PAD(ST7565_SS_PIN),
     // SPI initialization data.
     .tar0 = SPIx_CTARn_FMSZ(7)     // Frame size = 8 bytes
             | SPIx_CTARn_ASC(1)    // After SCK Delay Scaler (min 50 ns) = 55.56ns
@@ -66,13 +60,14 @@ static GFXINLINE void release_bus(GDisplay *g) {
 
 static GFXINLINE void init_board(GDisplay *g) {
     (void)g;
-    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
-    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
-    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
+    setPinOutput(ST7565_A0_PIN);
+    writePinHigh(ST7565_A0_PIN);
+    setPinOutput(ST7565_RST_PIN);
+    writePinHigh(ST7565_RST_PIN);
+    setPinOutput(ST7565_SS_PIN);
+
+    palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2);
+    palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2);
 
     spiInit();
     spiStart(&SPID1, &spi1config);
@@ -83,19 +78,18 @@ static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
 
 static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
     (void)g;
-    if (state) {
-        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    } else {
-        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
+    writePin(ST7565_RST_PIN, !state);
 }
 
-static GFXINLINE void enter_data_mode(GDisplay *g) { palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) { palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t *data, uint16_t length) {
+static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) {
     (void)g;
+    writePinLow(ST7565_A0_PIN);
+    spiSend(&SPID1, 1, &cmd);
+}
+
+static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) {
+    (void)g;
+    writePinHigh(ST7565_A0_PIN);
     spiSend(&SPID1, length, data);
 }
 

drivers/ugfx/gdisp/st7565/driver.mk

@@ -1,3 +1,3 @@
 GFXINC += drivers/ugfx/gdisp/st7565
 GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
-GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK
+GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK

drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c

@@ -49,31 +49,15 @@
 #        define ST7565_COM_SCAN ST7565_COM_SCAN_INC
 #    endif
 #    ifndef ST7565_PAGE_ORDER
-#        define ST7565_PAGE_ORDER 0, 1, 2, 3
+#        define ST7565_PAGE_ORDER 0, 1, 2, 3, 4, 5, 6, 7
 #    endif
 
 /*===========================================================================*/
 /* Driver local functions.                                                   */
 /*===========================================================================*/
 
-typedef struct {
-    bool_t  buffer2;
-    uint8_t data_pos;
-    uint8_t data[16];
-    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-} PrivData;
-
 // Some common routines and macros
-#    define PRIV(g) ((PrivData *)g->priv)
-#    define RAM(g) (PRIV(g)->ram)
-
-static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { PRIV(g)->data[PRIV(g)->data_pos++] = cmd; }
-
-static GFXINLINE void flush_cmd(GDisplay *g) {
-    write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
-    PRIV(g)->data_pos = 0;
-}
-
+#    define RAM(g) ((gU8 *)g->priv)
 #    define write_cmd2(g, cmd1, cmd2) \
         {                             \
             write_cmd(g, cmd1);       \
@@ -106,9 +90,10 @@ static GFXINLINE void flush_cmd(GDisplay *g) {
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     // The private area is the display surface.
-    g->priv           = gfxAlloc(sizeof(PrivData));
-    PRIV(g)->buffer2  = false;
-    PRIV(g)->data_pos = 0;
+    g->priv = gfxAlloc(GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8);
+    if (!g->priv) {
+        return gFalse;
+    }
 
     // Initialise the board interface
     init_board(g);
@@ -119,25 +104,33 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     setpin_reset(g, FALSE);
     gfxSleepMilliseconds(20);
     acquire_bus(g);
-    enter_cmd_mode(g);
 
-    write_cmd(g, ST7565_RESET);
     write_cmd(g, ST7565_LCD_BIAS);
     write_cmd(g, ST7565_ADC);
     write_cmd(g, ST7565_COM_SCAN);
 
-    write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
-    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
-
-    // turn on internal power supply (VC=1, VR=1, VF=1)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x07);
-
-    write_cmd(g, ST7565_INVERT_DISPLAY);
-    write_cmd(g, ST7565_ALLON_NORMAL);
-
     write_cmd(g, ST7565_START_LINE | 0);
+
+    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST * 64 / 101);
+    write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
+
+    // turn on voltage converter (VC=1, VR=0, VF=0)
+    write_cmd(g, ST7565_POWER_CONTROL | 0x04);
+    delay_ms(50);
+
+    // turn on voltage regulator (VC=1, VR=1, VF=0)
+    write_cmd(g, ST7565_POWER_CONTROL | 0x06);
+    delay_ms(50);
+
+    // turn on voltage follower (VC=1, VR=1, VF=1)
+    write_cmd(g, ST7565_POWER_CONTROL | 0x07);
+    delay_ms(50);
+
+    write_cmd(g, ST7565_DISPLAY_ON);
+    write_cmd(g, ST7565_ALLON_NORMAL);
+    write_cmd(g, ST7565_INVERT_DISPLAY);  // Disable Inversion of display.
+
     write_cmd(g, ST7565_RMW);
-    flush_cmd(g);
 
     // Finish Init
     post_init_board(g);
@@ -163,22 +156,14 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
     if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
 
     acquire_bus(g);
-    enter_cmd_mode(g);
-    unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
-    for (p = 0; p < 4; p++) {
-        write_cmd(g, ST7565_PAGE | (p + dstOffset));
+    gU8 pagemap[] = {ST7565_PAGE_ORDER};
+    for (p = 0; p < sizeof(pagemap); p++) {
+        write_cmd(g, ST7565_PAGE | pagemap[p]);
         write_cmd(g, ST7565_COLUMN_MSB | 0);
         write_cmd(g, ST7565_COLUMN_LSB | 0);
         write_cmd(g, ST7565_RMW);
-        flush_cmd(g);
-        enter_data_mode(g);
         write_data(g, RAM(g) + (p * GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
-        enter_cmd_mode(g);
     }
-    unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
-    write_cmd(g, ST7565_START_LINE | line);
-    flush_cmd(g);
-    PRIV(g)->buffer2 = !PRIV(g)->buffer2;
     release_bus(g);
 
     g->flags &= ~GDISP_FLG_NEEDFLUSH;
@@ -243,6 +228,7 @@ LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
 }
 #    endif
 
+#    if GDISP_HARDWARE_BITFILLS
 LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
     uint8_t *buffer     = (uint8_t *)g->p.ptr;
     int      linelength = g->p.cx;
@@ -268,6 +254,7 @@ LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
     }
     g->flags |= GDISP_FLG_NEEDFLUSH;
 }
+#    endif
 
 #    if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
 LLDSPEC void gdisp_lld_control(GDisplay *g) {
@@ -279,16 +266,12 @@ LLDSPEC void gdisp_lld_control(GDisplay *g) {
                 case powerSleep:
                 case powerDeepSleep:
                     acquire_bus(g);
-                    enter_cmd_mode(g);
                     write_cmd(g, ST7565_DISPLAY_OFF);
-                    flush_cmd(g);
                     release_bus(g);
                     break;
                 case powerOn:
                     acquire_bus(g);
-                    enter_cmd_mode(g);
                     write_cmd(g, ST7565_DISPLAY_ON);
-                    flush_cmd(g);
                     release_bus(g);
                     break;
                 default:
@@ -318,12 +301,11 @@ LLDSPEC void gdisp_lld_control(GDisplay *g) {
             return;
 
         case GDISP_CONTROL_CONTRAST:
-            g->g.Contrast = (unsigned)g->p.ptr & 63;
+            if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100;
             acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
-            flush_cmd(g);
+            write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr) << 6) / 101) & 0x3F);
             release_bus(g);
+            g->g.Contrast = (unsigned)g->p.ptr;
             return;
     }
 }

keyboards/1upkeyboards/1up60hte/1up60hte.c

@@ -16,19 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "1up60hte.h"
-
-void keyboard_pre_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-    setPinOutput(B6);
-    keyboard_pre_init_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-		writePinLow(B6);
-	} else {
-		writePinHigh(B6);
-	}
-    led_set_user(usb_led);
-}

keyboards/1upkeyboards/1up60hte/config.h

@@ -40,6 +40,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN B6
+#define LED_PIN_ON_STATE 0
+
 /* number of backlight levels */
 #define BACKLIGHT_PIN B7
 #ifdef BACKLIGHT_PIN

keyboards/1upkeyboards/super16/rules.mk

@@ -25,7 +25,8 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
-RGB_MATRIX_ENABLE = WS2812
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
 MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/1upkeyboards/sweet16/v1/config.h

@@ -17,6 +17,12 @@
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 
+#ifndef CONVERT_TO_PROTON_C
+#    define LED_NUM_LOCK_PIN B0 // RXLED
+#    define LED_CAPS_LOCK_PIN D5 // TXLED
+#    define LED_PIN_ON_STATE 0
+#endif
+
 /* Underglow options */
 #define RGB_DI_PIN B1
 #ifdef RGB_DI_PIN

keyboards/1upkeyboards/sweet16/v1/v1.c

@@ -1,21 +1 @@
 #include "v1.h"
-
-void led_set_kb(uint8_t usb_led) {
-#ifndef CONVERT_TO_PROTON_C
-    /* Map RXLED to USB_LED_NUM_LOCK */
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        setPinOutput(B0);
-        writePinLow(B0);
-    } else {
-        setPinInput(B0);
-    }
-
-    /* Map TXLED to USB_LED_CAPS_LOCK */
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        setPinOutput(D5);
-        writePinLow(D5);
-    } else {
-        setPinInput(D5);
-    }
-#endif
-}

keyboards/acekeyboard/titan60/config.h

@@ -0,0 +1,86 @@
+/*
+Copyright 2020 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xACE1 // Ace
+#define PRODUCT_ID   0x5449 // TI
+#define DEVICE_VER   0x0001
+#define MANUFACTURER Acekeyboard
+#define PRODUCT      titan60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+
+//                         0   1   2   3   4   5   6   7   8   9   A   B   C   D
+#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
+#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3}
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_BREATHING
+
+#define RGB_DI_PIN D2
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 14
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#    define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/acekeyboard/titan60/info.json

@@ -0,0 +1,32 @@
+{
+    "keyboard_name": "Titan60", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all_ansi_std": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}]
+        },
+
+        "LAYOUT_all_ansi_2u_lshift": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}]
+        },
+
+        "LAYOUT_60_ansi": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_60_ansi_tsangan": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
+        },
+
+        "LAYOUT_60_ansi_split_bs_rshift": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_60_ansi_split_spacebar": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/acekeyboard/titan60/keymaps/default/keymap.c

@@ -0,0 +1,48 @@
+/*
+Copyright 2020 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /*
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+     * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │  Enter │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤
+     * │ Shift  │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │    Shift │
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+     * │Ctrl│GUI │Alt │                        │ Alt│ GUI│Menu│Ctrl│
+     * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+     */
+    [0] = LAYOUT_60_ansi(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_B,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             MO(1), KC_RALT, KC_RGUI,  KC_RCTL
+    ),
+
+    [1] = LAYOUT_60_ansi(
+        KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,    KC_TRNS, KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,          KC_TRNS,
+        KC_TRNS,          KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS
+    ),
+};

keyboards/acekeyboard/titan60/keymaps/via/keymap.c

@@ -0,0 +1,64 @@
+/*
+Copyright 2020 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /*
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+     * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │  Enter │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤
+     * │ Shift  │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │    Shift │
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+     * │Ctrl│GUI │Alt │                        │ Alt│ GUI│Menu│Ctrl│
+     * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+     */
+    [0] = LAYOUT_60_ansi(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             MO(1), KC_RALT, KC_RGUI,  KC_RCTL
+    ),
+
+    [1] = LAYOUT_60_ansi(
+        KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,    KC_TRNS, KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,          KC_TRNS,
+        KC_TRNS,          KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS
+    ),
+
+    [2] = LAYOUT_60_ansi(
+        KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,          KC_TRNS,
+        KC_TRNS,          KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS
+    ),
+
+    [3] = LAYOUT_60_ansi(
+        KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,          KC_TRNS,
+        KC_TRNS,          KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS,    KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS
+    )
+};

keyboards/acekeyboard/titan60/keymaps/via/rules.mk

@@ -0,0 +1,3 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
+

keyboards/acekeyboard/titan60/readme.md

@@ -0,0 +1,17 @@
+# titan60
+
+60% custom keyboard originally meant for the Saturn 60
+
+* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+* Hardware Supported: Titan 60 PCB
+* Hardware Availability: [Acekeyboard](https://acekeyboard.co/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make acekeyboard/titan60:default
+
+Flashing example for this keyboard:
+
+    make acekeyboard/titan60:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/acekeyboard/titan60/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/acekeyboard/titan60/titan60.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2020 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "titan60.h"

keyboards/acekeyboard/titan60/titan60.h

@@ -0,0 +1,109 @@
+/*
+Copyright 2020 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+
+#define LAYOUT_all_ansi_std( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k2c,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,       \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d,            \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k43,       \
+    k40, k41, k42, k44, k46, k48, k4a, k4b, k4c, k4d                            \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d },  \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, ___, ___ },  \
+    { k40, k41, k42, k43, k44, ___, k46, ___, k48, ___, k4a, k4b, k4c, k4d }   \
+}
+
+#define LAYOUT_all_ansi_2u_lshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k2c,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,       \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d,            \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k47, k3c, k43,       \
+    k40, k41, k42, k44, k46, k48, k4a, k4d, k4b, k4c, k49                       \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d },  \
+    { k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, ___, ___ },  \
+    { k40, k41, k42, k43, k44, ___, k46, k47, k48, k49, k4a, k4b, k4c, k4d }   \
+}
+
+#define LAYOUT_60_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,  \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d,       \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c,            \
+    k40, k41, k42, k46, k4a, k4b, k4c, k4d                                 \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d },  \
+    { k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, ___, ___ },  \
+    { k40, k41, k42, ___, ___, ___, k46, ___, ___, ___, k4a, k4b, k4c, k4d }   \
+}
+
+#define LAYOUT_60_ansi_tsangan( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k2c,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,       \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d,            \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k43,            \
+    k40, k41, k42, k46, k4b, k4c, k4d                                           \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d },  \
+    { k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, ___, ___ },  \
+    { k40, k41, k42, k43, ___, ___, k46, ___, ___, ___, ___, k4b, k4c, k4d }   \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k2c, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d,           \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k43,           \
+    k40, k41, k42, k46, k4a, k4b, k4c, k4d                                     \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d },  \
+    { k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, ___, ___ },  \
+    { k40, k41, k42, k43, ___, ___, k46, ___, ___, ___, k4a, k4b, k4c, k4d }   \
+}
+
+#define LAYOUT_60_ansi_split_spacebar( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,  \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d,       \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c,            \
+    k40, k41, k42, k44, k46, k48, k4a, k4b, k4c, k4d                       \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d },  \
+    { k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, ___, ___ },  \
+    { k40, k41, k42, ___, k44, ___, k46, ___, k48, ___, k4a, k4b, k4c, k4d }   \
+}
+
+

keyboards/aeboards/ext65/config.h

@@ -1,4 +1,4 @@
-/* Copyright 2017 Paul Ewing
+/* Copyright 2020 Harrison Chan (Xelus)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,6 +14,4 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#pragma once
-
-// place overrides here
+#include "config_common.h"

keyboards/aeboards/ext65/ext65.c

@@ -0,0 +1 @@
+#include "ext65.h"

keyboards/aeboards/ext65/ext65.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include "quantum.h"
+
+#if defined(KEYBOARD_aeboards_ext65_rev1)
+    #include "rev1.h"
+#elif defined(KEYBOARD_aeboards_ext65_rev2)
+    #include "rev2.h"
+#endif

keyboards/aeboards/ext65/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2018 Jason Williams (Wilba)
+/* Copyright 2020 Harrison Chan (Xelus)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -30,18 +30,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `------------------------------------------------------------------------------------------'
    */
   [0] = LAYOUT_ext65(
-    RGB_M_T, BL_INC , BL_DEC , BL_TOGG, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
-    RGB_TOG, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
+    KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
+    KC_PPLS, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
     KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                   KC_PGUP,
     KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,                   KC_UP  , KC_PGDN,
     KC_PENT, KC_PDOT, KC_P0  , KC_P0  , KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                   MO(1)  , KC_RCTL,                   KC_LEFT, KC_DOWN, KC_RGHT
   ),
 
   [1] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET  , KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
+    KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          EEP_RST,
+    KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   DEBUG,
+    KC_TRNS, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
   ),
 

keyboards/aeboards/ext65/keymaps/via/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2018 Jason Williams (Wilba)
+/* Copyright 2020 Harrison Chan (Xelus)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -30,18 +30,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `------------------------------------------------------------------------------------------'
    */
   [0] = LAYOUT_ext65(
-    RGB_M_T, BL_INC , BL_DEC , BL_TOGG, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
-    RGB_TOG, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
+    KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
+    KC_PPLS, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
     KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                   KC_PGUP,
     KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,                   KC_UP  , KC_PGDN,
     KC_PENT, KC_PDOT, KC_P0  , KC_P0  , KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                   MO(1)  , KC_RCTL,                   KC_LEFT, KC_DOWN, KC_RGHT
   ),
 
   [1] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET  , KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
+    KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          EEP_RST,
+    KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   DEBUG,
+    KC_TRNS, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
   ),
 

keyboards/aeboards/ext65/readme.md

@@ -0,0 +1,19 @@
+# EXT65
+
+A southpaw inspired keyboard by [AEBoards](https://aeboards.com/)
+
+* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22)
+* Hardware Supported: EXT65 Rev1, Rev2
+* Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aeboards/ext65/rev1:default
+    make aeboards/ext65/rev2:default
+
+Flashing example for this keyboard:
+
+    make aeboards/ext65/rev1:default:flash
+    make aeboards/ext65/rev2:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aeboards/ext65/rev1/config.h

@@ -22,9 +22,8 @@
 #define VENDOR_ID       0x4145 // "AE"
 #define PRODUCT_ID      0xAE65 // AEboards EXT65
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    AEboards
-#define PRODUCT         AEboards Ext65
-#define DESCRIPTION     AEboards Ext65
+#define MANUFACTURER    AEBoards
+#define PRODUCT         AEBoards Ext65
 
 /* key matrix size */
 #define MATRIX_ROWS 10

keyboards/aeboards/ext65/rev1/keymaps/default/keymap.c

@@ -1,103 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap BASE: (Base Layer) Default Layer
-   * ,-------------------.  ,-------------------------------------------------------------------.     
-   * |-   | *  | /  |NmLK|  |Esc| 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|pipe| ~  | Pscr|
-   * |-------------------|  |-------------------------------------------------------------------| 
-   * |    | 9  | 8  | 7  |  |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BSPC  | Del |
-   * |  + |--------------|  |-------------------------------------------------------------------| 
-   * |    | 6  | 5  | 4  |  |Caps   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return   | Pgup|
-   * |-------------------|  |-------------------------------------------------------------------|
-   * |    | 3  | 2  | 1  |  |Shift    |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up | Pgdn|
-   * | ENT|-------------------------------------------------------------------------------------|
-   * |    | .  | 0       |  | Ctrl | Win | Alt |    Space        | FN | Ctrl |  |Left| Dn | Rght|
-   * `------------------------------------------------------------------------------------------'
-   */
-  [0] = LAYOUT_ext65(
-    KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
-    KC_PPLS, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
-    KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                   KC_PGUP,
-    KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,                   KC_UP  , KC_PGDN,
-    KC_PENT, KC_PDOT, KC_P0  , KC_P0  , KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                   MO(1)  , KC_RCTL,                   KC_LEFT, KC_DOWN, KC_RGHT
-  ),
-
-  [1] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
-  ),
-
-  [2] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
-  ),
-
-  [3] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
-  )
-};
-
-void keyboard_pre_init_user(void) {
-  // Call the keyboard pre init code.
-
-  // Set our LED pins as output
-  setPinOutput(D5);
-  setPinOutput(D3);
-  setPinOutput(D2);
-  setPinOutput(D1);
-}
-
-void led_set_user(uint8_t usb_led) {
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinHigh(D5);
-    } else {
-        writePinLow(D5);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinHigh(D3);
-    } else {
-        writePinLow(D3);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        writePinHigh(D2);
-    } else {
-        writePinLow(D2);
-    }
-}
-
-layer_state_t layer_state_set_user(layer_state_t state) {
-    switch (get_highest_layer(state)) {
-      case 1:
-        writePinHigh(D1);
-        break;
-      default: //  for any other layers, or the default layer
-        writePinLow(D1);
-        break;
-      }
-    return state;
-}

keyboards/aeboards/ext65/rev1/keymaps/default/readme.md

@@ -1,2 +0,0 @@
-# The Default Ext65 Layout
-

keyboards/aeboards/ext65/rev1/keymaps/via/keymap.c

@@ -1,103 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap BASE: (Base Layer) Default Layer
-   * ,-------------------.  ,-------------------------------------------------------------------.     
-   * |-   | *  | /  |NmLK|  |Esc| 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|pipe| ~  | Pscr|
-   * |-------------------|  |-------------------------------------------------------------------| 
-   * |    | 9  | 8  | 7  |  |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BSPC  | Del |
-   * |  + |--------------|  |-------------------------------------------------------------------| 
-   * |    | 6  | 5  | 4  |  |Caps   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return   | Pgup|
-   * |-------------------|  |-------------------------------------------------------------------|
-   * |    | 3  | 2  | 1  |  |Shift    |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up | Pgdn|
-   * | ENT|-------------------------------------------------------------------------------------|
-   * |    | .  | 0       |  | Ctrl | Win | Alt |    Space        | FN | Ctrl |  |Left| Dn | Rght|
-   * `------------------------------------------------------------------------------------------'
-   */
-  [0] = LAYOUT_ext65(
-    KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
-    KC_PPLS, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
-    KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                   KC_PGUP,
-    KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,                   KC_UP  , KC_PGDN,
-    KC_PENT, KC_PDOT, KC_P0  , KC_P0  , KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                   MO(1)  , KC_RCTL,                   KC_LEFT, KC_DOWN, KC_RGHT
-  ),
-
-  [1] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
-  ),
-
-  [2] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
-  ),
-
-  [3] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
-  )
-};
-
-void keyboard_pre_init_user(void) {
-  // Call the keyboard pre init code.
-
-  // Set our LED pins as output
-  setPinOutput(D5);
-  setPinOutput(D3);
-  setPinOutput(D2);
-  setPinOutput(D1);
-}
-
-void led_set_user(uint8_t usb_led) {
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinHigh(D5);
-    } else {
-        writePinLow(D5);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinHigh(D3);
-    } else {
-        writePinLow(D3);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        writePinHigh(D2);
-    } else {
-        writePinLow(D2);
-    }
-}
-
-uint32_t layer_state_set_user(uint32_t state) {
-    switch (biton32(state)) {
-      case 1:
-        writePinHigh(D1);
-        break;
-      default: //  for any other layers, or the default layer
-        writePinLow(D1);
-        break;
-      }
-    return state;
-}

keyboards/aeboards/ext65/rev1/keymaps/via/readme.md

@@ -1,2 +0,0 @@
-# The VIA Ext65 Layout
-

keyboards/aeboards/ext65/rev1/readme.md

@@ -1,14 +0,0 @@
-EXT65
-===
-
-A southpaw inspired keyboard by [aeboards](https://aeboards.com/)
-
-Keyboard Maintainer: [Xelus22](https://github.com/Xelus22)  
-Hardware Supported: EXT65 
-Hardware Availability: Custom keyboard group buys
-
-Make example for this keyboard (after setting up your build environment):
-
-    make aeboards/ext65/rev1:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aeboards/ext65/rev1/rev1.c

@@ -1,18 +1,32 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+#include "rev1.h"
 
-// Nothing to see here, move along... ;-)
+void keyboard_pre_init_user(void) {
+  // Call the keyboard pre init code.
+  // Set our LED pins as output
+  setPinOutput(D5);
+  setPinOutput(D3);
+  setPinOutput(D2);
+  setPinOutput(D1);
+}
 
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(D5, led_state.num_lock);
+        writePin(D3, led_state.caps_lock);
+        writePin(D2, led_state.scroll_lock);
+    }
+    return res;
+}
+
+layer_state_t layer_state_set_kb(layer_state_t state) {
+    switch (get_highest_layer(state)) {
+      case 1:
+        writePinHigh(D1);
+        break;
+      default: //  for any other layers, or the default layer
+        writePinLow(D1);
+        break;
+      }
+    return layer_state_set_user(state);
+}

keyboards/aeboards/ext65/rev1/rev1.h

@@ -1,4 +1,4 @@
-/* Copyright 2018 Jason Williams (Wilba)
+/* Copyright 2020 Harrison Chan (Xelus)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,6 +16,7 @@
 
 #pragma once
 
+#include "ext65.h"
 #include "quantum.h"
 
 #define ____ KC_NO

keyboards/aeboards/ext65/rev2/config.h

@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0x4145 // "AE"
 #define PRODUCT_ID      0xA652 // AEboards EXT65 Rev2
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    AEboards
+#define MANUFACTURER    AEBoards
 #define PRODUCT         AEBoards Ext65 Rev2
 
 /* key matrix size */

keyboards/aeboards/ext65/rev2/rev2.h

@@ -1,5 +1,22 @@
+/* Copyright 2020 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #pragma once
 
+#include "ext65.h"
 #include "quantum.h"
 
 #define ____ KC_NO

keyboards/aeboards/ext65/rules.mk

@@ -0,0 +1 @@
+DEFAULT_FOLDER = aeboards/ext65/rev2

keyboards/al1/al1.c

@@ -14,27 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "al1.h"
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    CONFIG_LED_IO;
-    print_dec(usb_led);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK))
-        PORTB &= ~(1<<7);
-    else
-        PORTB |=  (1<<7);
-
-    if (usb_led & (1<<USB_LED_NUM_LOCK))
-        PORTD &= ~(1<<0);
-    else
-        PORTD |=  (1<<0);
-
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
-        PORTD &= ~(1<<1);
-    else
-        PORTD |=  (1<<1);
-	led_set_user(usb_led);
-}

keyboards/al1/al1.h

@@ -18,11 +18,6 @@
 
 #include "quantum.h"
 
-#define CONFIG_LED_IO \
-  DDRB |= (1<<7) | (1<<6); \
-  DDRD |= (1<<0) | (1<<1);
-
-
 #define LAYOUT( \
                K500, K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K415, K414,\
                K501, K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K215, K413,\

keyboards/al1/config.h

@@ -46,6 +46,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN D0
+#define LED_CAPS_LOCK_PIN B7
+#define LED_SCROLL_LOCK_PIN D1
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B6
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3

keyboards/alf/dc60/config.h

@@ -48,6 +48,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN B7
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B6
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5

keyboards/alf/dc60/dc60.c

@@ -14,36 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "dc60.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 7);
-		PORTB &= ~(1 << 7);
-	} else {
-		DDRB &= ~(1 << 7);
-		PORTB &= ~(1 << 7);
-	}
-
-	led_set_user(usb_led);
-}

keyboards/alf/x11/config.h

@@ -48,10 +48,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define LED_NUM_LOCK_PIN E6
+#define LED_CAPS_LOCK_PIN C6
+#define LED_SCROLL_LOCK_PIN C7
+#define LED_PIN_ON_STATE 0
 
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING

keyboards/alf/x11/x11.c

@@ -14,51 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "x11.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    setPinOutput(C6);
-    setPinOutput(E6);
-    setPinOutput(C7);
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(C6);
-    } else {
-        writePinHigh(C6);
-    }
-
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinLow(E6);
-    } else {
-        writePinHigh(E6);
-    }
-
-    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        writePinLow(C7);
-    } else {
-        writePinHigh(C7);
-    }
-
-    led_set_user(usb_led);
-}

keyboards/alps64/alps64.c

@@ -15,23 +15,3 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "alps64.h"
-
-void keyboard_pre_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-    setPinOutput(C5);
-    keyboard_pre_init_user();
-}
-
-void led_set_kb(uint8_t usb_led)
-{
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        // output high
-        writePinHigh(C5);
-    } else {
-        // Hi-Z
-        writePinLow(C5);
-    }
-
-    led_set_user(usb_led);
-}

keyboards/alps64/config.h

@@ -37,6 +37,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN C5
+
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/amj40/amj40.c

@@ -1,30 +1 @@
 #include "amj40.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRB |= (1<<2);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB &= ~(1<<2);
-    } else {
-        // Turn capslock off
-        PORTB |= (1<<2);
-    }
-}

keyboards/amj40/config.h

@@ -38,6 +38,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7}
 #define UNUSED_PINS
 
+#define LED_CAPS_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B6
 
 /* COL2ROW or ROW2COL */

keyboards/amj60/amj60.c

@@ -1,30 +1 @@
 #include "amj60.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRB |= (1<<2);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB &= ~(1<<2);
-    } else {
-        // Turn capslock off
-        PORTB |= (1<<2);
-    }
-}

keyboards/amj60/config.h

@@ -38,11 +38,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3}
 #define UNUSED_PINS
 
-#define BACKLIGHT_PIN B6
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
+#define BACKLIGHT_PIN B6
+
+
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/amjpad/amjpad.c

@@ -1,30 +1 @@
 #include "amjpad.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRD |= (1<<6);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        // Turn numlock on
-        PORTD &= ~(1<<6);
-    } else {
-        // Turn numlock off
-        PORTD |= (1<<6);
-    }
-}

keyboards/amjpad/config.h

@@ -54,6 +54,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+#define LED_NUM_LOCK_PIN D6
+#define LED_PIN_ON_STATE 0
+
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

keyboards/anavi/macropad8/keymaps/default/keymap.c

@@ -25,7 +25,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) {
 void oled_task_user(void) {
   // Host Keyboard Layer Status
   oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false);
-  oled_write_P(PSTR("Active layer:"), false);
+  oled_write_P(PSTR("Active layer: "), false);
 
   switch (get_highest_layer(layer_state)) {
     case _MAIN:

keyboards/anavi/macropad8/keymaps/kodi/keymap.c

@@ -12,6 +12,18 @@ const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {60, 30, 15};
 const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {20, 10, 4};
 #endif
 
+/**
+ * Kodi shortcuts:
+ *
+ * ESC - Previous menu OR Home screen
+ * Enter - Select
+ * X - Stop
+ * Arrows to move
+ *
+ * For details have a look at:
+ * https://kodi.wiki/view/Keyboard_controls
+ */
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_MAIN] = LAYOUT_ortho_2x4(
      KC_ESC, KC_UP, KC_ENTER, KC_X,
@@ -32,11 +44,11 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) {
 void oled_task_user(void) {
   // Host Keyboard Layer Status
   oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false);
-  oled_write_P(PSTR("Active layer:"), false);
+  oled_write_P(PSTR("Active layer: "), false);
 
   switch (get_highest_layer(layer_state)) {
     case _MAIN:
-      oled_write_ln_P(PSTR("Main"), false);
+      oled_write_ln_P(PSTR("Kodi"), false);
       break;
     case _FN:
       oled_write_ln_P(PSTR("FN"), false);

keyboards/ares/ares.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+Copyright 2019 Evy Dekkers
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

keyboards/ares/keymaps/default/keymap.c

@@ -1,5 +1,5 @@
 /*
-Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+Copyright 2019 Evy Dekkers
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

keyboards/at_at/660m/660m.c

@@ -1 +1,6 @@
 #include "660m.h"
+
+void board_init(void) {
+  SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
+  SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
+}

keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -1,268 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-#include "stm32_gpio.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types.                                         */
-/*===========================================================================*/
-
-/**
- * @brief   Type of STM32 GPIO port setup.
- */
-typedef struct {
-  uint32_t              moder;
-  uint32_t              otyper;
-  uint32_t              ospeedr;
-  uint32_t              pupdr;
-  uint32_t              odr;
-  uint32_t              afrl;
-  uint32_t              afrh;
-} gpio_setup_t;
-
-/**
- * @brief   Type of STM32 GPIO initialization data.
- */
-typedef struct {
-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
-  gpio_setup_t          PAData;
-#endif
-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
-  gpio_setup_t          PBData;
-#endif
-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
-  gpio_setup_t          PCData;
-#endif
-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
-  gpio_setup_t          PDData;
-#endif
-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
-  gpio_setup_t          PEData;
-#endif
-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
-  gpio_setup_t          PFData;
-#endif
-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
-  gpio_setup_t          PGData;
-#endif
-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
-  gpio_setup_t          PHData;
-#endif
-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
-  gpio_setup_t          PIData;
-#endif
-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
-  gpio_setup_t          PJData;
-#endif
-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
-  gpio_setup_t          PKData;
-#endif
-} gpio_config_t;
-
-/**
- * @brief   STM32 GPIO static initialization data.
- */
-static const gpio_config_t gpio_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH},
-#endif
-#if STM32_HAS_GPIOJ
-  {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
-   VAL_GPIOJ_ODR,   VAL_GPIOJ_AFRL,   VAL_GPIOJ_AFRH},
-#endif
-#if STM32_HAS_GPIOK
-  {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
-   VAL_GPIOK_ODR,   VAL_GPIOK_AFRL,   VAL_GPIOK_AFRH}
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
-
-  gpiop->OTYPER  = config->otyper;
-  gpiop->OSPEEDR = config->ospeedr;
-  gpiop->PUPDR   = config->pupdr;
-  gpiop->ODR     = config->odr;
-  gpiop->AFRL    = config->afrl;
-  gpiop->AFRH    = config->afrh;
-  gpiop->MODER   = config->moder;
-}
-
-static void stm32_gpio_init(void) {
-
-  /* Enabling GPIO-related clocks, the mask comes from the
-     registry header file.*/
-  rccResetAHB(STM32_GPIO_EN_MASK);
-  rccEnableAHB(STM32_GPIO_EN_MASK, true);
-
-  /* Initializing all the defined GPIO ports.*/
-#if STM32_HAS_GPIOA
-  gpio_init(GPIOA, &gpio_default_config.PAData);
-#endif
-#if STM32_HAS_GPIOB
-  gpio_init(GPIOB, &gpio_default_config.PBData);
-#endif
-#if STM32_HAS_GPIOC
-  gpio_init(GPIOC, &gpio_default_config.PCData);
-#endif
-#if STM32_HAS_GPIOD
-  gpio_init(GPIOD, &gpio_default_config.PDData);
-#endif
-#if STM32_HAS_GPIOE
-  gpio_init(GPIOE, &gpio_default_config.PEData);
-#endif
-#if STM32_HAS_GPIOF
-  gpio_init(GPIOF, &gpio_default_config.PFData);
-#endif
-#if STM32_HAS_GPIOG
-  gpio_init(GPIOG, &gpio_default_config.PGData);
-#endif
-#if STM32_HAS_GPIOH
-  gpio_init(GPIOH, &gpio_default_config.PHData);
-#endif
-#if STM32_HAS_GPIOI
-  gpio_init(GPIOI, &gpio_default_config.PIData);
-#endif
-#if STM32_HAS_GPIOJ
-  gpio_init(GPIOJ, &gpio_default_config.PJData);
-#endif
-#if STM32_HAS_GPIOK
-  gpio_init(GPIOK, &gpio_default_config.PKData);
-#endif
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-/**
- * @brief   Early initialization code.
- * @details GPIO ports and system clocks are initialized before everything
- *          else.
- */
-void __early_init(void) {
-  extern void enter_bootloader_mode_if_requested(void);
-  enter_bootloader_mode_if_requested();
-  stm32_gpio_init();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-  SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
-  SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
-}

keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -1,940 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*===========================================================================*/
-/* Driver constants.                                                         */
-/*===========================================================================*/
-
-/*
- * Setup for ST STM32F072B-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F072B_DISCOVERY
-#define BOARD_NAME                  "ST STM32F072B-Discovery"
-
-/*
- * Board oscillators-related settings.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK                32768
-#endif
-
-#define STM32_LSEDRV                (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK                0U
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F072xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON                0U
-#define GPIOA_PIN1                  1U
-#define GPIOA_PIN2                  2U
-#define GPIOA_PIN3                  3U
-#define GPIOA_PIN4                  4U
-#define GPIOA_PIN5                  5U
-#define GPIOA_PIN6                  6U
-#define GPIOA_PIN7                  7U
-#define GPIOA_PIN8                  8U
-#define GPIOA_PIN9                  9U
-#define GPIOA_PIN10                 10U
-#define GPIOA_USB_DM                11U
-#define GPIOA_USB_DP                12U
-#define GPIOA_SWDIO                 13U
-#define GPIOA_SWCLK                 14U
-#define GPIOA_PIN15                 15U
-
-#define GPIOB_PIN0                  0U
-#define GPIOB_PIN1                  1U
-#define GPIOB_PIN2                  2U
-#define GPIOB_PIN3                  3U
-#define GPIOB_PIN4                  4U
-#define GPIOB_PIN5                  5U
-#define GPIOB_PIN6                  6U
-#define GPIOB_PIN7                  7U
-#define GPIOB_PIN8                  8U
-#define GPIOB_PIN9                  9U
-#define GPIOB_PIN10                 10U
-#define GPIOB_PIN11                 11U
-#define GPIOB_PIN12                 12U
-#define GPIOB_SPI2_SCK              13U
-#define GPIOB_SPI2_MISO             14U
-#define GPIOB_SPI2_MOSI             15U
-
-#define GPIOC_MEMS_CS               0U
-#define GPIOC_PIN1                  1U
-#define GPIOC_PIN2                  2U
-#define GPIOC_PIN3                  3U
-#define GPIOC_PIN4                  4U
-#define GPIOC_PIN5                  5U
-#define GPIOC_LED_RED               6U
-#define GPIOC_LED_BLUE              7U
-#define GPIOC_LED_ORANGE            8U
-#define GPIOC_LED_GREEN             9U
-#define GPIOC_PIN10                 10U
-#define GPIOC_PIN11                 11U
-#define GPIOC_PIN12                 12U
-#define GPIOC_PIN13                 13U
-#define GPIOC_OSC32_IN              14U
-#define GPIOC_OSC32_OUT             15U
-
-#define GPIOD_PIN0                  0U
-#define GPIOD_PIN1                  1U
-#define GPIOD_PIN2                  2U
-#define GPIOD_PIN3                  3U
-#define GPIOD_PIN4                  4U
-#define GPIOD_PIN5                  5U
-#define GPIOD_PIN6                  6U
-#define GPIOD_PIN7                  7U
-#define GPIOD_PIN8                  8U
-#define GPIOD_PIN9                  9U
-#define GPIOD_PIN10                 10U
-#define GPIOD_PIN11                 11U
-#define GPIOD_PIN12                 12U
-#define GPIOD_PIN13                 13U
-#define GPIOD_PIN14                 14U
-#define GPIOD_PIN15                 15U
-
-#define GPIOE_PIN0                  0U
-#define GPIOE_PIN1                  1U
-#define GPIOE_PIN2                  2U
-#define GPIOE_PIN3                  3U
-#define GPIOE_PIN4                  4U
-#define GPIOE_PIN5                  5U
-#define GPIOE_PIN6                  6U
-#define GPIOE_PIN7                  7U
-#define GPIOE_PIN8                  8U
-#define GPIOE_PIN9                  9U
-#define GPIOE_PIN10                 10U
-#define GPIOE_PIN11                 11U
-#define GPIOE_PIN12                 12U
-#define GPIOE_PIN13                 13U
-#define GPIOE_PIN14                 14U
-#define GPIOE_PIN15                 15U
-
-#define GPIOF_OSC_IN                0U
-#define GPIOF_OSC_OUT               1U
-#define GPIOF_PIN2                  2U
-#define GPIOF_PIN3                  3U
-#define GPIOF_PIN4                  4U
-#define GPIOF_PIN5                  5U
-#define GPIOF_PIN6                  6U
-#define GPIOF_PIN7                  7U
-#define GPIOF_PIN8                  8U
-#define GPIOF_PIN9                  9U
-#define GPIOF_PIN10                 10U
-#define GPIOF_PIN11                 11U
-#define GPIOF_PIN12                 12U
-#define GPIOF_PIN13                 13U
-#define GPIOF_PIN14                 14U
-#define GPIOF_PIN15                 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
-#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
-#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
-#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
-#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
-#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
-#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
-#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
-#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
-#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
-#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
-
-/*===========================================================================*/
-/* Driver pre-compile time settings.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks.                                       */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros.                                                            */
-/*===========================================================================*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
-#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
-#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
-#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
-#define PIN_ODR_LOW(n)              (0U << (n))
-#define PIN_ODR_HIGH(n)             (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
-#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
-#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
-#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
-#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
-#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
-#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
-#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
-#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - PIN4                      (input pullup).
- * PA5  - PIN5                      (input pullup).
- * PA6  - PIN6                      (input pullup).
- * PA7  - PIN7                      (input pullup).
- * PA8  - PIN8                      (input pullup).
- * PA9  - PIN9                      (input pullup).
- * PA10 - PIN10                     (input pullup).
- * PA11 - USB_DM                    (input floating).
- * PA12 - USB_DP                    (input floating).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
-                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
-                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
-                                     PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
-                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
-                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
-                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
-                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
-                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
-                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
-                                     PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
-#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
-
-/*
- * GPIOB setup:
- *
- * PB0  - PIN0                      (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - PIN3                      (input pullup).
- * PB4  - PIN4                      (input pullup).
- * PB5  - PIN5                      (input pullup).
- * PB6  - PIN6                      (input pullup).
- * PB7  - PIN7                      (input pullup).
- * PB8  - PIN8                      (input pullup).
- * PB9  - PIN9                      (input pullup).
- * PB10 - PIN10                     (input pullup).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - SPI2_SCK                  (alternate 0).
- * PB14 - SPI2_MISO                 (alternate 0).
- * PB15 - SPI2_MOSI                 (alternate 0).
- */
-#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
-#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
-
-/*
- * GPIOC setup:
- *
- * PC0  - MEMS_CS                   (output pushpull maximum).
- * PC1  - PIN1                      (input pullup).
- * PC2  - PIN2                      (input pullup).
- * PC3  - PIN3                      (input pullup).
- * PC4  - PIN4                      (input pullup).
- * PC5  - PIN5                      (input pullup).
- * PC6  - LED_RED                   (output pushpull maximum).
- * PC7  - LED_BLUE                  (output pushpull maximum).
- * PC8  - LED_ORANGE                (output pushpull maximum).
- * PC9  - LED_GREEN                 (output pushpull maximum).
- * PC10 - PIN10                     (input pullup).
- * PC11 - PIN11                     (input pullup).
- * PC12 - PIN12                     (input pullup).
- * PC13 - PIN13                     (input pullup).
- * PC14 - OSC32_IN                  (input floating).
- * PC15 - OSC32_OUT                 (input floating).
- */
-#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
-                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
-                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
-                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
-                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
-                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
-                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
-                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
-                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
-#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
-                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
-                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
-                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
-
-/*
- * GPIOD setup:
- *
- * PD0  - PIN0                      (input pullup).
- * PD1  - PIN1                      (input pullup).
- * PD2  - PIN2                      (input pullup).
- * PD3  - PIN3                      (input pullup).
- * PD4  - PIN4                      (input pullup).
- * PD5  - PIN5                      (input pullup).
- * PD6  - PIN6                      (input pullup).
- * PD7  - PIN7                      (input pullup).
- * PD8  - PIN8                      (input pullup).
- * PD9  - PIN9                      (input pullup).
- * PD10 - PIN10                     (input pullup).
- * PD11 - PIN11                     (input pullup).
- * PD12 - PIN12                     (input pullup).
- * PD13 - PIN13                     (input pullup).
- * PD14 - PIN14                     (input pullup).
- * PD15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
-#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
-
-/*
- * GPIOE setup:
- *
- * PE0  - PIN0                      (input pullup).
- * PE1  - PIN1                      (input pullup).
- * PE2  - PIN2                      (input pullup).
- * PE3  - PIN3                      (input pullup).
- * PE4  - PIN4                      (input pullup).
- * PE5  - PIN5                      (input pullup).
- * PE6  - PIN6                      (input pullup).
- * PE7  - PIN7                      (input pullup).
- * PE8  - PIN8                      (input pullup).
- * PE9  - PIN9                      (input pullup).
- * PE10 - PIN10                     (input pullup).
- * PE11 - PIN11                     (input pullup).
- * PE12 - PIN12                     (input pullup).
- * PE13 - PIN13                     (input pullup).
- * PE14 - PIN14                     (input pullup).
- * PE15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
-#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
-
-/*
- * GPIOF setup:
- *
- * PF0  - OSC_IN                    (input floating).
- * PF1  - OSC_OUT                   (input floating).
- * PF2  - PIN2                      (input pullup).
- * PF3  - PIN3                      (input pullup).
- * PF4  - PIN4                      (input pullup).
- * PF5  - PIN5                      (input pullup).
- * PF6  - PIN6                      (input pullup).
- * PF7  - PIN7                      (input pullup).
- * PF8  - PIN8                      (input pullup).
- * PF9  - PIN9                      (input pullup).
- * PF10 - PIN10                     (input pullup).
- * PF11 - PIN11                     (input pullup).
- * PF12 - PIN12                     (input pullup).
- * PF13 - PIN13                     (input pullup).
- * PF14 - PIN14                     (input pullup).
- * PF15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
-                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
-                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
-                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
-                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
-                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
-                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
-                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
-#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
-
-/*===========================================================================*/
-/* External declarations.                                                    */
-/*===========================================================================*/
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* BOARD_H */

keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg

@@ -1,703 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!-- STM32F0xx board Template -->
-<board
-  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
-  <configuration_settings>
-    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
-    <output_path>..</output_path>
-    <hal_version>3.0.x</hal_version>
-  </configuration_settings>
-  <board_name>ST STM32F072B-Discovery</board_name>
-  <board_id>ST_STM32F072B_DISCOVERY</board_id>
-  <board_functions></board_functions>
-  <subtype>STM32F072xB</subtype>
-  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
-  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
-  <ports>
-    <GPIOA>
-      <pin0
-        ID="BUTTON"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID="USB_DM"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID="USB_DP"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID="SWDIO"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin14
-        ID="SWCLK"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullDown"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin15
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOA>
-    <GPIOB>
-      <pin0
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID="SPI2_SCK"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin14
-        ID="SPI2_MISO"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin15
-        ID="SPI2_MOSI"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-    </GPIOB>
-    <GPIOC>
-      <pin0
-        ID="MEMS_CS"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Output"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID="LED_RED"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" />
-      <pin7
-        ID="LED_BLUE"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" />
-      <pin8
-        ID="LED_ORANGE"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" ></pin8>
-      <pin9
-        ID="LED_GREEN"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin14
-        ID="OSC32_IN"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin15
-        ID="OSC32_OUT"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOC>
-    <GPIOD>
-      <pin0
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin14
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin15
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOD>
-    <GPIOE>
-    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    </GPIOE>
-    <GPIOF>
-      <pin0
-        ID="OSC_IN"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID="OSC_OUT"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin14
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin15
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOF>
-  </ports>
-</board>

keyboards/at_at/660m/bootloader_defs.h

@@ -1,7 +1,5 @@
 /* Address for jumping to bootloader on STM32 chips. */
 /* It is chip dependent, the correct number can be looked up here (page 175):
  * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
  */
 #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/at_at/660m/config.h

@@ -17,6 +17,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
+/* Ensure we jump to bootloader if the RESET keycode was pressed */
+#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+
+/* LSE clock */
+#define STM32_LSECLK 32768
+
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xA22A
 #define PRODUCT_ID      0x6600