Add support for shared EP on V-USB boards (#11103)

* whale/sk/v3: info.json debug linting

* LAYOUT_all key sequence fix

* remove `key_count` key

* LAYOUT_right_half_only dead-space removal

Removes the dead space from the QMK Configurator rendering.

Makefile

@@ -68,37 +68,8 @@ PATH_ELEMENTS := $(subst /, ,$(STARTING_DIR))
 # Initialize the path elements list for further processing
 $(eval $(call NEXT_PATH_ELEMENT))
 
-# This function sets the KEYBOARD; KEYMAP and SUBPROJECT to the correct
-# variables depending on which directory you stand in.
-# It's really a very simple if else chain, if you squint enough,
-# but the makefile syntax makes it very verbose.
-# If we are in a subfolder of keyboards
-#
-# *** No longer needed **
-#
-# ifeq ($(CURRENT_PATH_ELEMENT),keyboards)
-#     $(eval $(call NEXT_PATH_ELEMENT))
-#     KEYBOARD := $(CURRENT_PATH_ELEMENT)
-#     $(eval $(call NEXT_PATH_ELEMENT))
-#     # If we are in a subfolder of keymaps, or in other words in a keymap
-#     # folder
-#     ifeq ($(CURRENT_PATH_ELEMENT),keymaps)
-#         $(eval $(call NEXT_PATH_ELEMENT))
-#         KEYMAP := $(CURRENT_PATH_ELEMENT)
-#      # else if we are not in the keyboard folder itself
-#     else ifneq ($(CURRENT_PATH_ELEMENT),)
-#         # the we can assume it's a subproject, as no other folders
-#         # should have make files in them
-#         SUBPROJECT := $(CURRENT_PATH_ELEMENT)
-#         $(eval $(call NEXT_PATH_ELEMENT))
-#         # if we are inside a keymap folder of a subproject
-#         ifeq ($(CURRENT_PATH_ELEMENT),keymaps)
-#             $(eval $(call NEXT_PATH_ELEMENT))
-#             KEYMAP := $(CURRENT_PATH_ELEMENT)
-#         endif
-#     endif
-# endif
 
+# Phony targets to enable a few simple make commands outside the main processing below.
 .PHONY: list-keyboards
 list-keyboards:
 	util/list_keyboards.sh | sort -u | tr '\n' ' '
@@ -131,7 +102,6 @@ endif
 # Uncomment these for debugging
 # $(info Keyboard: $(KEYBOARD))
 # $(info Keymap: $(KEYMAP))
-# $(info Subproject: $(SUBPROJECT))
 
 
 # Set the default goal depending on where we are running make from
@@ -189,7 +159,6 @@ endef
 # A recursive helper function for finding the longest match
 # $1 The list to be checked
 # It works by always removing the currently matched item from the list
-# and call itself recursively, until a match is found
 define TRY_TO_MATCH_RULE_FROM_LIST_HELPER2
     # Stop the recursion when the list is empty
     ifneq ($1,)
@@ -386,23 +355,6 @@ define PARSE_ALL_KEYBOARDS
     $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_KEYBOARD,$(shell util/list_keyboards.sh noci | sort -u)))
 endef
 
-# $1 Subproject
-# When entering this, the keyboard and subproject are known, so now we need
-# to determine which keymaps are going to get compiled
-# define PARSE_SUBPROJECT
-
-# endef
-
-# If we want to parse all subprojects, but the keyboard doesn't have any,
-# then use defaultsp instead
-# define PARSE_ALL_SUBPROJECTS
-#     ifeq ($$(SUBPROJECTS),)
-#         $$(eval $$(call PARSE_SUBPROJECT,defaultsp))
-#     else
-#         $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_SUBPROJECT,$$(SUBPROJECTS)))
-#     endif
-# endef
-
 # Prints a list of all known keymaps for the given keyboard
 define LIST_ALL_KEYMAPS
     COMMAND_true_LIST_KEYMAPS := \
@@ -544,12 +496,12 @@ if [ $$error_occurred -gt 0 ]; then $(HANDLE_ERROR); fi;
 
 endef
 
-# Let's match everything, we handle all the rule parsing ourselves
+# Catch everything and parse the command line ourselves.
 .PHONY: %
 %:
 	# Check if we have the CMP tool installed
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
-	# Ensure that bin/qmk works. This will be a failing check after the next develop merge on 2020 Aug 29.
+	# Ensure that bin/qmk works. This will be a failing check after the next develop merge
 	if ! bin/qmk hello 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
@@ -580,25 +532,6 @@ endif
 	$(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 
-# These no longer work because of the colon system
-
-# All should compile everything
-# .PHONY: all
-# all: all-keyboards test-all
-
-# Define some shortcuts, mostly for compatibility with the old syntax
-# .PHONY: all-keyboards
-# all-keyboards: all\:all\:all
-
-# .PHONY: all-keyboards-defaults
-# all-keyboards-defaults: all\:default
-
-# .PHONY: test
-# test: test-all
-
-# .PHONY: test-clean
-# test-clean: test-all-clean
-
 lib/%:
 	git submodule sync $?
 	git submodule update --init $?

build_full_test.mk

@@ -30,4 +30,4 @@ $(TEST)_SRC += $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp))
 
 $(TEST)_DEFS=$(TMK_COMMON_DEFS) $(OPT_DEFS)
 $(TEST)_CONFIG=$(TEST_PATH)/config.h
-VPATH+=$(TOP_DIR)/tests/test_common
+VPATH+=$(TOP_DIR)/tests/test_common

build_keyboard.mk

@@ -368,6 +368,7 @@ endif
 
 build: elf cpfirmware
 check-size: build
+check-md5: build
 objs-size: build
 
 include show_options.mk

build_test.mk

@@ -17,7 +17,7 @@ OUTPUTS := $(TEST_OBJ)/$(TEST) $(GTEST_OUTPUT)
 GTEST_INC := \
 	$(LIB_PATH)/googletest/googletest/include\
 	$(LIB_PATH)/googletest/googlemock/include\
-	
+
 GTEST_INTERNAL_INC :=\
 	$(LIB_PATH)/googletest/googletest\
 	$(LIB_PATH)/googletest/googlemock
@@ -27,7 +27,7 @@ $(GTEST_OUTPUT)_SRC :=\
 	googletest/src/gtest_main.cc\
 	googlemock/src/gmock-all.cc
 
-$(GTEST_OUTPUT)_DEFS := 
+$(GTEST_OUTPUT)_DEFS :=
 $(GTEST_OUTPUT)_INC := $(GTEST_INC) $(GTEST_INTERNAL_INC)
 
 LDFLAGS += -lstdc++ -lpthread -shared-libgcc
@@ -66,4 +66,3 @@ include $(TMK_PATH)/rules.mk
 
 $(shell mkdir -p $(BUILD_DIR)/test 2>/dev/null)
 $(shell mkdir -p $(TEST_OBJ) 2>/dev/null)
-

docs/ChangeLog/20190830.md

@@ -50,4 +50,3 @@ This document marks the inaugural Breaking Change merge. A list of changes follo
 * `KC_DELT` was a redundant, undocumented alias for `KC_DELETE`
 * It has been removed and all its uses replaced with the more common `KC_DEL` alias
 * Around 90 keymaps (mostly for ErgoDox boards) have been modified as a result
-

docs/README.md

@@ -24,7 +24,7 @@ Totally new to QMK? There are two ways to get started:
 
 ## Make It Yours
 
-QMK has lots of [features](features.md) to explore, and a good deal of reference documentation to dig through. Most features are taken advantage of by modifying your [keymap](keymap.md), and changing the [keycodes](keycodes.md).
+QMK has lots of features to explore, and a good deal of reference documentation to dig through. Most features are taken advantage of by modifying your [keymap](keymap.md), and changing the [keycodes](keycodes.md).
 
 ## Need help?
 

docs/cli_commands.md

@@ -175,7 +175,7 @@ Creates a keymap.json from a keymap.c.
 **Usage**:
 
 ```
-qmk c2json [--no-cpp] [-o OUTPUT] filename
+qmk c2json -km KEYMAP -kb KEYBOARD [-q] [--no-cpp] [-o OUTPUT] filename
 ```
 
 ## `qmk lint`

docs/driver_installation_zadig.md

@@ -14,16 +14,11 @@ Some keyboards may have specific instructions for entering the bootloader. For e
 To put a device in bootloader mode with USBaspLoader, tap the `RESET` button while holding down the `BOOT` button.
 Alternatively, hold `BOOT` while inserting the USB cable.
 
-Zadig will automatically detect the bootloader device. You may sometimes need to check **Options → List All Devices**.
-
- - For keyboards with Atmel AVR MCUs, the bootloader will be named something similar to `ATm32U4DFU`, and have a Vendor ID of `03EB`.
- - USBasp bootloaders will appear as `USBasp`, with a VID/PID of `16C0:05DC`.
- - AVR keyboards flashed with the QMK-DFU bootloader will be named `<keyboard name> Bootloader` and will also have the VID `03EB`.
- - For most ARM keyboards, it will be called `STM32 BOOTLOADER`, and have a VID/PID of `0483:DF11`.
+Zadig should automatically detect the bootloader device, but you may sometimes need to check **Options → List All Devices** and select the device from the dropdown instead.
 
 !> If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is probably not in bootloader mode. The arrow will be colored orange and you will be asked to confirm modifying a system driver. **Do not** proceed if this is the case!
 
-If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. USBAspLoader devices must use the `libusbK` driver.
+If the arrow appears green, select the driver, and click **Install Driver**. See the [list of known bootloaders](#list-of-known-bootloaders) for the correct driver to install.
 
 ![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png)
 
@@ -43,6 +38,40 @@ Right-click it and hit **Uninstall device**. Make sure to tick **Delete the driv
 
 ![The Device Uninstall dialog, with the "delete driver" checkbox ticked](https://i.imgur.com/aEs2RuA.png)
 
-Click **Action → Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again!
+Click **Action → Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again! Otherwise, repeat the process until Zadig reports the correct driver.
 
 ?> A full reboot of your computer may sometimes be necessary at this point, to get Windows to pick up the new driver.
+
+## List of Known Bootloaders
+
+This is a list of known bootloader devices and their USB vendor and product IDs, as well as the correct driver to assign for flashing with QMK. Note that the usbser and HidUsb drivers are built in to Windows, and cannot be assigned with Zadig - if your device has an incorrect driver, you must use the Device Manager to uninstall it as described in the previous section.
+
+The device name here is the name that appears in Zadig, and may not be what the Device Manager or QMK Toolbox displays.
+
+|Bootloader   |Device Name                   |VID/PID       |Driver |
+|-------------|------------------------------|--------------|-------|
+|`atmel-dfu`  |ATmega16u2 DFU                |`03EB:2FEF`   |libusb0|
+|`atmel-dfu`  |ATmega32U2 DFU                |`03EB:2FF0`   |libusb0|
+|`atmel-dfu`  |ATm16U4 DFU V1.0.2            |`03EB:2FF3`   |libusb0|
+|`atmel-dfu`  |ATm32U4DFU                    |`03EB:2FF4`   |libusb0|
+|`atmel-dfu`  |*none* (AT90USB64)            |`03EB:2FF9`   |libusb0|
+|`atmel-dfu`  |AT90USB128 DFU                |`03EB:2FFB`   |libusb0|
+|`qmk-dfu`    |(keyboard name) Bootloader    |As `atmel-dfu`|libusb0|
+|`halfkay`    |*none*                        |`16C0:0478`   |HidUsb |
+|`caterina`   |Pro Micro 3.3V                |`1B4F:9203`   |usbser |
+|`caterina`   |Pro Micro 5V                  |`1B4F:9205`   |usbser |
+|`caterina`   |LilyPadUSB                    |`1B4F:9207`   |usbser |
+|`caterina`   |Pololu A-Star 32U4 Bootloader |`1FFB:0101`   |usbser |
+|`caterina`   |Arduino Leonardo              |`2341:0036`   |usbser |
+|`caterina`   |Arduino Micro                 |`2341:0037`   |usbser |
+|`caterina`   |Adafruit Feather 32u4         |`239A:000C`   |usbser |
+|`caterina`   |Adafruit ItsyBitsy 32u4 3V    |`239A:000D`   |usbser |
+|`caterina`   |Adafruit ItsyBitsy 32u4 5V    |`239A:000E`   |usbser |
+|`caterina`   |Arduino Leonardo              |`2A03:0036`   |usbser |
+|`caterina`   |Arduino Micro                 |`2A03:0037`   |usbser |
+|`bootloadHID`|HIDBoot                       |`16C0:05DF`   |HidUsb |
+|`USBasp`     |USBasp                        |`16C0:05DC`   |libusbK|
+|`apm32-dfu`  |APM32 DFU ISP Mode            |`314B:0106`   |WinUSB |
+|`stm32-dfu`  |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
+|`kiibohd`    |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |
+|`stm32duino` |Maple 003                     |`1EAF:0003`   |WinUSB |

docs/es/hardware_drivers.md

@@ -33,4 +33,3 @@ Soporte para hasta 2 controladores. Cada controlador implementa 2 matrices charl
 ## IS31FL3733
 
 Soporte para hasta un solo controlador con espacio para expansión. Cada controlador puede controlar 192 LEDs individuales o 64 LEDs RGB. Para obtener más información sobre cómo configurar el controlador, consulta la página de [Matriz RGB](feature_rgb_matrix.md).
-

docs/feature_debounce_type.md

@@ -148,4 +148,3 @@ The following old names for existing algorithms will continue to be supported, h
 * eager_pk - old name for sym_eager_pk
 * sym_pk - old name for sym_defer_pk
 * eager_pr - old name for sym_eager_pr
-

docs/feature_macros.md

@@ -209,7 +209,7 @@ SEND_STRING(".."SS_TAP(X_END));
 
 There are some functions you may find useful in macro-writing. Keep in mind that while you can write some fairly advanced code within a macro, if your functionality gets too complex you may want to define a custom keycode instead. Macros are meant to be simple.
 
-?> You can also use the functions described in [Useful function](ref_functions.md) for additional functionality. For example `reset_keyboard()` allows you to reset the keyboard as part of a macro.
+?> You can also use the functions described in [Useful functions](ref_functions.md) for additional functionality. For example `reset_keyboard()` allows you to reset the keyboard as part of a macro.
 
 ### `record->event.pressed`
 

docs/feature_rawhid.md

@@ -29,7 +29,7 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
 }
 ```
 
-`raw_hid_receive` can receive variable size packets from host with maximum length `RAW_EPSIZE`. `raw_hid_send` on the other hand can send packets to host of exactly `RAW_EPSIZE` length, therefore it should be used with data of length `RAW_EPSIZE`.
+These two functions send and receive packets of length `RAW_EPSIZE` bytes to and from the host (32 on LUFA/ChibiOS/V-USB, 64 on ATSAM).
 
 Make sure to flash raw enabled firmware before proceeding with working on the host side.
 

docs/feature_rgb_matrix.md

@@ -306,6 +306,12 @@ To declare new effects, create a new `rgb_matrix_user/kb.inc` that looks somethi
 `rgb_matrix_user.inc` should go in the root of the keymap directory.
 `rgb_matrix_kb.inc` should go in the root of the keyboard directory.
 
+To use custom effects in your code, simply prepend `RGB_MATRIX_CUSTOM_` to the effect name specified in `RGB_MATRIX_EFFECT()`. For example, an effect declared as `RGB_MATRIX_EFFECT(my_cool_effect)` would be referenced with:
+
+```c
+rgb_matrix_mode(RGB_MATRIX_CUSTOM_my_cool_effect);
+```
+
 ```c
 // !!! DO NOT ADD #pragma once !!! //
 

docs/feature_rgblight.md

@@ -187,6 +187,8 @@ const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 
 ## Lighting Layers
 
+?> **Note:** Lighting Layers is an RGB Light feature, it will not work for RGB Matrix. See [RGB Matrix Indicators](feature_rgb_matrix.md?indicators) for details on how to do so.
+
 By including `#define RGBLIGHT_LAYERS` in your `config.h` file you can enable lighting layers. These make
 it easy to use your underglow LEDs as status indicators to show which keyboard layer is currently active, or the state of caps lock, all without disrupting any animations. [Here's a video](https://youtu.be/uLGE1epbmdY) showing an example of what you can do.
 
@@ -368,14 +370,14 @@ rgblight_sethsv(HSV_GREEN, 2); // led 2
 |`rgblight_increase_hue_noeeprom()`          |Increase the hue for effect range LEDs. This wraps around at maximum hue (not written to EEPROM) |
 |`rgblight_decrease_hue()`                   |Decrease the hue for effect range LEDs. This wraps around at minimum hue |
 |`rgblight_decrease_hue_noeeprom()`          |Decrease the hue for effect range LEDs. This wraps around at minimum hue (not written to EEPROM) |
-|`rgblight_increase_sat()`                   |Increase the saturation for effect range LEDs. This wraps around at maximum saturation |
-|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for effect range LEDs. This wraps around at maximum saturation (not written to EEPROM) |
-|`rgblight_decrease_sat()`                   |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation |
-|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation (not written to EEPROM) |
-|`rgblight_increase_val()`                   |Increase the value for effect range LEDs. This wraps around at maximum value |
-|`rgblight_increase_val_noeeprom()`          |Increase the value for effect range LEDs. This wraps around at maximum value (not written to EEPROM) |
-|`rgblight_decrease_val()`                   |Decrease the value for effect range LEDs. This wraps around at minimum value |
-|`rgblight_decrease_val_noeeprom()`          |Decrease the value for effect range LEDs. This wraps around at minimum value (not written to EEPROM) |
+|`rgblight_increase_sat()`                   |Increase the saturation for effect range LEDs. This stops at maximum saturation |
+|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for effect range LEDs. This stops at maximum saturation (not written to EEPROM) |
+|`rgblight_decrease_sat()`                   |Decrease the saturation for effect range LEDs. This stops at minimum saturation |
+|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for effect range LEDs. This stops at minimum saturation (not written to EEPROM) |
+|`rgblight_increase_val()`                   |Increase the value for effect range LEDs. This stops at maximum value |
+|`rgblight_increase_val_noeeprom()`          |Increase the value for effect range LEDs. This stops at maximum value (not written to EEPROM) |
+|`rgblight_decrease_val()`                   |Decrease the value for effect range LEDs. This stops at minimum value |
+|`rgblight_decrease_val_noeeprom()`          |Decrease the value for effect range LEDs. This stops at minimum value (not written to EEPROM) |
 |`rgblight_sethsv(h, s, v)`                  |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 |
 |`rgblight_sethsv_noeeprom(h, s, v)`         |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
 

docs/feature_sequencer.md

@@ -85,4 +85,3 @@ While the tempo defines the absolute speed at which the sequencer goes through t
 |`void sequencer_activate_track(uint8_t track);`                      |Activate the `track`                                   |
 |`void sequencer_deactivate_track(uint8_t track);`                    |Deactivate the `track`                                 |
 |`void sequencer_toggle_single_active_track(uint8_t track);`          |Set `track` as the only active track or deactivate all |
-

docs/feature_stenography.md

@@ -129,4 +129,3 @@ As defined in `keymap_steno.h`.
 |`STN_RES1`||(GeminiPR only)|
 |`STN_RES2`||(GeminiPR only)|
 |`STN_PWR`||(GeminiPR only)|
-

docs/fuse.txt

@@ -47,4 +47,3 @@ This configuration is from usbasploader's Makefile.
 #             |     |   +----- LB 2..1 (No memory lock features enabled)
 #             |     +--------- BLB0 2..1 (No restrictions for SPM or LPM accessing the Application section)
 #             +--------------- BLB1 2..1 (No restrictions for SPM or LPM accessing the Boot Loader section)
-

docs/hand_wire.md

@@ -78,7 +78,7 @@ Established materials and techniques include:
 | Short lengths of wire | [u/xicolinguada's ortho build](https://www.reddit.com/r/MechanicalKeyboards/comments/c39k4f/my_first_hand_wired_keyboard_its_not_perfect_but/) | Easier to strip the wire | More difficult to place | ![individual wire lengths](https://i.imgur.com/mBe5vkL.jpg)
 | Magnet/Enamelled wire | [Brett Kosinski's handwired alpha](http://blog.b-ark.ca/Blog-2019-01-27) and [fknraiden's custom board](https://geekhack.org/index.php?topic=74223.0) | Can be directly soldered onto (insulation burns off with heat) | Appearance? | ![Magnet wire](https://i.imgur.com/b4b7KDb.jpg)
 | Bending the legs of the diodes for the rows | [Matt3o's Brownfox](https://deskthority.net/viewtopic.php?f=7&t=6050) | Fewer solder joints required | Uninsulated | ![Bent diode legs](https://i.imgur.com/aTnG8TV.jpg)
-| Using ridid wiring (e.g. brass tube) | [u/d_stilgar's invisible hardline](https://www.reddit.com/r/MechanicalKeyboards/comments/8aw5j2/invisible_hardline_keyboard_progress_update_april/) and [u/jonasfasler's first attempt](https://www.reddit.com/r/MechanicalKeyboards/comments/de1jyv/my_first_attempt_at_handwiring_a_keyboard/) | Very pretty | More difficult. No physical insulation | ![Hardline hand wire](https://i.imgur.com/CnASmPo.jpg)
+| Using rigid wiring (e.g. brass tube) | [u/d_stilgar's invisible hardline](https://www.reddit.com/r/MechanicalKeyboards/comments/8aw5j2/invisible_hardline_keyboard_progress_update_april/) and [u/jonasfasler's first attempt](https://www.reddit.com/r/MechanicalKeyboards/comments/de1jyv/my_first_attempt_at_handwiring_a_keyboard/) | Very pretty | More difficult. No physical insulation | ![Hardline hand wire](https://i.imgur.com/CnASmPo.jpg)
 | Bare wire with insulation added after (e.g. kapton tape) | [Matt3o's 65% on his website](https://matt3o.com/hand-wiring-a-custom-keyboard/) | Easier (no wire stripping required) | Not as attractive | ![Bare wire](https://i.imgur.com/AvXZShD.jpg)
 | Copper tape | [ManuForm Dactyl](https://github.com/tshort/dactyl-keyboard) | Very easy | Only really works when your plate/case aligns with the bottom of your switches | ![Copper tape](https://i.imgur.com/RFyNMlL.jpg)
 
@@ -121,7 +121,7 @@ Letting the diode rest, grab your solder, and touch both it and the soldering ir
 
 The smoke that the rosin releases is harmful, so be careful not to breath it or get it in your eyes/face.
 
-After soldering things in place, it may be helpful to blow on the joint to push the smoke away from your face, and cool the solder quicker. You should see the solder develop a matte (not shiny) surface as it solidifies. Keep in mind that it will still be very hot afterwards, and will take a couple minutes to be cool to touch. Blow on it will accelerate this process.
+After soldering things in place, it may be helpful to blow on the joint to push the smoke away from your face, and cool the solder quicker. You should see the solder develop a matte (not shiny) surface as it solidifies. Keep in mind that it will still be very hot afterwards, and will take a couple minutes to be cool to touch. Blowing on it will accelerate this process.
 
 When the first diode is complete, the next one will need to be soldered to both the keyswitch, and the previous diode at the new elbow. That will look something like this:
 

docs/hardware_avr.md

@@ -77,7 +77,7 @@ Do change the `MANUFACTURER` and `PRODUCT` lines to accurately reflect your keyb
 #define PRODUCT         my_awesome_keyboard
 ```
 
-?> Windows and macOS will display the `MANUFACTURER` and `PRODUCT` in the list of USB devices. `lsusb` on Linux instead takes these from the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. `lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.
+?> Windows and macOS will display the `MANUFACTURER` and `PRODUCT` in the list of USB devices. `lsusb` on Linux instead prefers the values in the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html). By default, it will only use `MANUFACTURER` and `PRODUCT` if the list does not contain that `VENDOR_ID` / `PRODUCT_ID`. `sudo lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.
 
 ### Keyboard Matrix Configuration
 

docs/he-il/documentation_best_practices.md

@@ -64,4 +64,4 @@
 ```
 
 מקמו את התיעוד שלכם בתוך  `docs/feature_<my_cool_feature>.md`, והוסיפו קישור לקובץ זה במקום המתאים ב `docs/_sidebar.md`. אם הוספתם קודי מקשים נוספים, תקפידו להוסיף אותם ל-  `docs/keycodes.md` עם לינק לעמוד היכולת שלכם.
-</div>
+</div>

docs/he-il/faq.md

@@ -5,4 +5,4 @@
 * [בנייה או קומפילציה של QMK](faq_build.md)
 * [דיבאגינג ופתרון בעיות של QMK](faq_debug.md)
 * [מיפוי מקשים](faq_keymap.md)
-</div>
+</div>

docs/he-il/faq_general.md

@@ -14,4 +14,4 @@ TMK עוצב ומומש במקור ע״י [Jun Wako](https://github.com/tmk). QM
 מנק׳ מבט של הפרוייקט וניהול הקהילה, TMK מנהל את כל המקלדות הנתמכות בעצמו, עם מעט תמיכה מהקהילה. כל אחד יכול לעשות פורק מהפרוייקט עבור מקלדות אחרות. רק מס׳ מיפויי מקשים נמצאים בברירת המחדל כך שאנשים בד״כ לא משתפים מיפויי מקשים זה עם זה. QMK מעודד את השיתוף של המקלדות וקודי המקשים דרך רפוזיטורי בניהול מרכזי, אשר מקבל את כל בקשות ה- Pull Requests שעומדות בסטנדרט האיכות. רובם מנוהלות ע״י הקהילה, אבל הצוות של QMK עוזר כשנדרש.
 
 לשתי הגישות יש יתרונות וחסרונות וקוד עובר בחופשיות בין TMK ל- QMK כשצריך.
-</div>
+</div>

docs/he-il/getting_started_getting_help.md

@@ -14,4 +14,4 @@
 ## סוגיות GitHub
 
 ניתן לפתוח [סוגייה ב-GitHub](https://github.com/qmk/qmk_firmware/issues). הדבר שימושי במיוחד כאשר הסוגיה דורשת דיון עמוק וארוך או דיבאגינג.
-</div>
+</div>

docs/he-il/hardware.md

@@ -7,4 +7,4 @@ QMK רצה על מגוון של חומרות. אם המעבד שלך יכול ל
 * [מעבדי AVR](hardware_avr.md)
 * מעבדי ARM (TBD)
 * [מנהלי התקנים](hardware_drivers.md)
-</div>
+</div>

docs/he-il/newbs_learn_more_resources.md

@@ -13,4 +13,4 @@
 מקורות לפקודות שורה (Command Line):
 
 * [מדריך טוב על Command Line](https://www.codecademy.com/learn/learn-the-command-line)
-</div>
+</div>

docs/index.html

@@ -126,6 +126,10 @@
         headings: 'h1, h2',
         title: 'Table of Contents',
       },
+      tabs: {
+        persist    : false,
+        tabComments: false,
+      },
       plugins: [
         function (hook, vm) {
           hook.beforeEach(function (html) {
@@ -148,6 +152,7 @@
   <script src="//unpkg.com/docsify/lib/docsify.min.js"></script>
   <script src="//unpkg.com/docsify/lib/plugins/search.min.js"></script>
   <script src="//unpkg.com/docsify/lib/plugins/emoji.min.js"></script>
+  <script src="//unpkg.com/docsify-tabs@1"></script>
   <script src="//unpkg.com/docsify-copy-code@2"></script>
   <script src="//unpkg.com/docsify-toc@1.0.0/dist/toc.js"></script>
   <script src="//unpkg.com/prismjs/components/prism-bash.min.js"></script>

docs/ja/_summary.md

@@ -103,6 +103,7 @@
     * [DIP スイッチ](ja/feature_dip_switch.md)
     * [エンコーダ](ja/feature_encoders.md)
     * [触覚フィードバック](ja/feature_haptic_feedback.md)
+    * [LED インジケータ](ja/feature_led_indicators.md)
     * [Proton C 変換](ja/proton_c_conversion.md)
     * [PS/2 マウス](ja/feature_ps2_mouse.md)
     * [分割キーボード](ja/feature_split_keyboard.md)

docs/ja/custom_quantum_functions.md

@@ -1,8 +1,8 @@
 # キーボードの挙動をカスタマイズする方法
 
 <!---
-  original document: 0.10.33:docs/custom_quantum_functions.md
-  git diff 0.10.33 HEAD -- docs/custom_quantum_functions.md | cat
+  original document: 0.10.52:docs/custom_quantum_functions.md
+  git diff 0.10.52 HEAD -- docs/custom_quantum_functions.md | cat
 -->
 
 多くの人にとって、カスタムキーボードはボタンの押下をコンピュータに送信するだけではありません。単純なボタンの押下やマクロよりも複雑なことを実行できるようにしたいでしょう。QMK にはコードを挿入したり、機能を上書きしたり、様々な状況でキーボードの挙動をカスタマイズできるフックがあります。
@@ -93,106 +93,6 @@ keyrecord_t record {
 }
 ```
 
-# LED 制御
-
-QMK は HID 仕様で定義された5つの LED の読み取りメソッドを提供します:
-
-* Num Lock
-* Caps Lock
-* Scroll Lock
-* Compose
-* Kana
-
-ロック LED の状態を取得するには2つの方法があります:
-
-* `bool led_update_kb(led_t led_state)` あるいは `_user(led_t led_state)` を実装する、または
-* `led_t host_keyboard_led_state()` を呼び出す
-
-!> `host_keyboard_led_state()` は `led_update_user()` が呼ばれる前に新しい値を既に反映している場合があります。
-
-LED の状態を `uint8_t` として提供する2つの非推奨の関数があります:
-
-* `uint8_t led_set_kb(uint8_t usb_led)` と `_user(uint8_t usb_led)`
-* `uint8_t host_keyboard_leds()`
-
-## `led_update_user()`
-
-この関数はこれら5つの LED のいずれかの状態が変化すると呼ばれます。LED の状態を構造体のパラメータとして受け取ります。
-
-慣例により、`led_update_kb()` にそのコードを実行するようフックさせるために `led_update_user()` から `true` を返し、`led_update_kb()` でコードを実行したくない場合は `false` を返します。
-
-以下はいくつかの例です:
-
-- レイヤー表示のような何かのために LED を使うために LED を上書きする
-   - `_kb()` 関数を実行したくないので、`false`  を返します。これはレイヤーの挙動を上書きするためです。
-- LED がオンあるいはオフになった時に音楽を再生する。
-   - `_kb` 関数を実行したいので、`true` を返します。これはデフォルトの LED の挙動に追加されます。
-
-?> `led_set_*` 関数は `bool` の代わりに `void` を返すため、キーボードの LED 制御を上書きすることができません。従って、代わりに `led_update_*` を使うことをお勧めします。
-
-### `led_update_kb()` の実装例
-
-```c
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if(res) {
-        // writePin は 1 でピンを high に、0 で low に設定します。
-        // この例では、ピンは反転していて、
-        // low/0 は LED がオンになり、high/1 は LED がオフになります。
-        // この挙動は、LED がピンと VCC の間にあるか、ピンと GND の間にあるかどうかに依存します。
-        writePin(B0, !led_state.num_lock);
-        writePin(B1, !led_state.caps_lock);
-        writePin(B2, !led_state.scroll_lock);
-        writePin(B3, !led_state.compose);
-        writePin(B4, !led_state.kana);
-    }
-    return res;
-}
-```
-
-### `led_update_user()` の実装例
-
-この不完全な例は Caps Lock がオンまたはオフになった場合に音を再生します。また LED の状態を保持する必要があるため、`true` を返します。
-
-```c
-#ifdef AUDIO_ENABLE
-  float caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND);
-  float caps_off[][2] = SONG(CAPS_LOCK_OFF_SOUND);
-#endif
-
-bool led_update_user(led_t led_state) {
-    #ifdef AUDIO_ENABLE
-    static uint8_t caps_state = 0;
-    if (caps_state != led_state.caps_lock) {
-        led_state.caps_lock ? PLAY_SONG(caps_on) : PLAY_SONG(caps_off);
-        caps_state = led_state.caps_lock;
-    }
-    #endif
-    return true;
-}
-```
-
-### `led_update_*` 関数のドキュメント
-
-* キーボード/リビジョン: `bool led_update_kb(led_t led_state)`
-* キーマップ: `bool led_update_user(led_t led_state)`
-
-## `host_keyboard_led_state()`
-
-最後に受信した LED の状態を `led_t` として取得するためにこの関数を呼びます。これは、`led_update_*` の外部から、例えば [`matrix_scan_user()`](#matrix-scanning-code) の中で LED の状態を読み取るのに便利です。
-
-## 物理的な LED の状態の設定
-
-一部のキーボードの実装は、物理的な LED の状態を設定するための便利なメソッドを提供しています。
-
-### Ergodox キーボード
-
-Ergodox の実装は、個々の LED をオンあるいはオフにするために `ergodox_right_led_1`/`2`/`3_on`/`off()` と、インデックスによってそれらをオンあるいはオフにするために `ergodox_right_led_on`/`off(uint8_t led)` を提供します。
-
-さらに、LED の明度を指定することができます。全ての LED に同じ明度を指定するなら `ergodox_led_all_set(uint8_t n)` を使い、個別の LED の明度を指定するなら `ergodox_right_led_1`/`2`/`3_set(uint8_t n)` を使い、LED のインデックスを指定して明度を指定するには  `ergodox_right_led_set(uint8_t led, uint8_t n)` を使います。
-
-Ergodox キーボードは、最低の明度として `LED_BRIGHTNESS_LO` を、最高の輝度(これはデフォルトです)として `LED_BRIGHTNESS_HI` も定義しています。
-
 # キーボードの初期化コード
 
 キーボードの初期化プロセスには幾つかのステップがあります。何をしたいかによって、どの関数を使うべきかに影響します。
@@ -347,7 +247,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
 }
 ```
 
-特定のレイヤーの状態を確認するには、 `IS_LAYER_ON_STATE(state, layer)` と `IS_LAYER_OFF_STATE(state, layer)` マクロを使います。
+特定のレイヤーの状態を確認するには、`IS_LAYER_ON_STATE(state, layer)` と `IS_LAYER_OFF_STATE(state, layer)` マクロを使います。
 
 `layer_state_set_*` 関数の外では、グローバルなレイヤー状態を確認するために `IS_LAYER_ON(layer)` と `IS_LAYER_OFF(layer)` マクロを使えます。
 

docs/ja/feature_debounce_type.md

@@ -43,5 +43,3 @@ endif
 * eager_pk - キーごとにデバウンスします。状態が変化すると、応答は即座に行われ、その後そのキーは ```DEBOUNCE``` ミリ秒の間入力されません。
 * sym_g - キーボードごとにデバウンスします。状態が変化すると、グローバルタイマが設定されます。```DEBOUNCE``` ミリ秒の間何も変化がなければ、全ての入力の変更がプッシュされます。
 * sym_pk - キーごとにデバウンスします。状態が変化すると、キーごとのタイマーが設定されます。```DEBOUNCE``` ミリ秒の間そのキーに変化がなければ、キーの状態の変更がプッシュされます。
-
-

docs/ja/feature_led_indicators.md

@@ -0,0 +1,119 @@
+# LED インジケータ
+
+<!---
+  original document: 0.10.52:docs/feature_led_indicators.md
+  git diff 0.10.52 HEAD -- docs/feature_led_indicators.md | cat
+-->
+
+QMK は HID 仕様で定義された5つの LED の読み取りメソッドを提供します:
+
+* Num Lock
+* Caps Lock
+* Scroll Lock
+* Compose
+* Kana
+
+ロック LED の状態を取得するには3つの方法があります:
+* `config.h` で設定オプションを指定する
+* `bool led_update_kb(led_t led_state)` あるいは `_user(led_t led_state)` を実装する、または
+* `led_t host_keyboard_led_state()` を呼び出す
+
+!> `host_keyboard_led_state()` は `led_update_user()` が呼ばれる前に新しい値を既に反映している場合があります。
+
+LED の状態を `uint8_t` として提供する2つの非推奨の関数があります:
+
+* `uint8_t led_set_kb(uint8_t usb_led)` と `_user(uint8_t usb_led)`
+* `uint8_t host_keyboard_leds()`
+
+## 設定オプション
+
+インジケータを設定するには、`config.h` で以下の `#define` をします:
+
+| 定義                  | 既定値     | 説明                             |
+|-----------------------|------------|----------------------------------|
+| `LED_NUM_LOCK_PIN`    | *定義なし* | `Num Lock` LED を制御するピン    |
+| `LED_CAPS_LOCK_PIN`   | *定義なし* | `Caps Lock` LED を制御するピン   |
+| `LED_SCROLL_LOCK_PIN` | *定義なし* | `Scroll Lock` LED を制御するピン |
+| `LED_COMPOSE_PIN`     | *定義なし* | `Compose` LED を制御するピン     |
+| `LED_KANA_PIN`        | *定義なし* | `Kana` LED を制御するピン        |
+| `LED_PIN_ON_STATE`    | `1`        | LED が "オン" の時のインジケータピンの状態 - high の場合は`1`、low の場合は`0` |
+
+独自のキーボードを設計しているわけではない限り、通常は上記の設定オプションを変更する必要はありません。
+
+## `led_update_*()`
+
+設定オプションが十分な柔軟性を提供しない場合は、提供される API フックにより LED の挙動の独自の制御ができます。これらの関数はこれら5つの LED のいずれかの状態が変化すると呼ばれます。LED の状態を構造体のパラメータとして受け取ります。
+
+慣例により、`led_update_kb()` にそのコードを実行するようフックさせるために `led_update_user()` から `true` を返し、`led_update_kb()` でコードを実行したくない場合は `false` を返します。
+
+以下はいくつかの例です:
+
+- レイヤー表示のような何かのために LED を使うために LED を上書きする
+   - `_kb()` 関数を実行したくないので、`false`  を返します。これはレイヤーの挙動を上書きするためです。
+- LED がオンあるいはオフになった時に音楽を再生する。
+   - `_kb` 関数を実行したいので、`true` を返します。これはデフォルトの LED の挙動に追加されます。
+
+?> `led_set_*` 関数は `bool` の代わりに `void` を返すため、キーボードの LED 制御を上書きすることができません。従って、代わりに `led_update_*` を使うことをお勧めします。
+
+### `led_update_kb()` の実装例
+
+```c
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        // writePin は 1 でピンを high に、0 で low に設定します。
+        // この例では、ピンは反転していて、
+        // low/0 は LED がオンになり、high/1 は LED がオフになります。
+        // この挙動は、LED がピンと VCC の間にあるか、ピンと GND の間にあるかどうかに依存します。
+        writePin(B0, !led_state.num_lock);
+        writePin(B1, !led_state.caps_lock);
+        writePin(B2, !led_state.scroll_lock);
+        writePin(B3, !led_state.compose);
+        writePin(B4, !led_state.kana);
+    }
+    return res;
+}
+```
+
+### `led_update_user()` の実装例
+
+この不完全な例は Caps Lock がオンまたはオフになった場合に音を再生します。また LED の状態を保持する必要があるため、`true` を返します。
+
+```c
+#ifdef AUDIO_ENABLE
+  float caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND);
+  float caps_off[][2] = SONG(CAPS_LOCK_OFF_SOUND);
+#endif
+
+bool led_update_user(led_t led_state) {
+    #ifdef AUDIO_ENABLE
+    static uint8_t caps_state = 0;
+    if (caps_state != led_state.caps_lock) {
+        led_state.caps_lock ? PLAY_SONG(caps_on) : PLAY_SONG(caps_off);
+        caps_state = led_state.caps_lock;
+    }
+    #endif
+    return true;
+}
+```
+
+### `led_update_*` 関数のドキュメント
+
+* キーボード/リビジョン: `bool led_update_kb(led_t led_state)`
+* キーマップ: `bool led_update_user(led_t led_state)`
+
+## `host_keyboard_led_state()`
+
+最後に受信した LED の状態を `led_t` として取得するためにこの関数を呼びます。これは、`led_update_*` の外部から、例えば [`matrix_scan_user()`](#matrix-scanning-code) の中で LED の状態を読み取るのに便利です。
+
+## 物理的な LED の状態の設定
+
+一部のキーボードの実装は、物理的な LED の状態を設定するための便利なメソッドを提供しています。
+
+### Ergodox キーボード
+
+Ergodox の実装は、個々の LED をオンあるいはオフにするために `ergodox_right_led_1`/`2`/`3_on`/`off()` と、インデックスによってそれらをオンあるいはオフにするために `ergodox_right_led_on`/`off(uint8_t led)` を提供します。
+
+さらに、LED の明度を指定することができます。全ての LED に同じ明度を指定するなら `ergodox_led_all_set(uint8_t n)` を使い、個別の LED の明度を指定するなら `ergodox_right_led_1`/`2`/`3_set(uint8_t n)` を使い、LED のインデックスを指定して明度を指定するには  `ergodox_right_led_set(uint8_t led, uint8_t n)` を使います。
+
+Ergodox キーボードは、最低の明度として `LED_BRIGHTNESS_LO` を、最高の輝度(これはデフォルトです)として `LED_BRIGHTNESS_HI` も定義しています。

docs/ja/feature_rawhid.md

@@ -0,0 +1,74 @@
+# Raw HID
+
+<!---
+  original document: 0.10.47:docs/feature_rawhid.md
+  git diff 0.10.47 HEAD -- docs/feature_rawhid.md | cat
+-->
+
+Raw HID は、HID インタフェースを介して QMK とホストコンピュータ間の双方向通信を可能にします。これには、キーマップをその場で切り替えたり、RGB LED の色とモードを変更したりなど、多くの潜在的な使用方法があります。
+
+キーボードで raw HID を機能させるには、2つの主要なコンポーネントがあります。
+
+## キーボードファームウェア
+
+ファームウェアの実装はとても簡単です。
+`rules.mk` に以下を追加します:
+
+```make
+RAW_ENABLE = yes
+```
+
+`keymap.c` に `"raw_hid.h"` を include し、以下を実装します:
+
+```C
+void raw_hid_receive(uint8_t *data, uint8_t length) {
+    // ここにコードを書きます。data はホストから受信したパケットです。
+}
+```
+
+`"raw_hid.h"` ヘッダは、キーボードからホストにパケットを送信できる `void raw_hid_send(uint8_t *data, uint8_t length);` も宣言します。例として、全てのデータをホストに返すことで、ホストアプリケーションを構築する時のデバッグに使うこともできます。
+
+```C
+void raw_hid_receive(uint8_t *data, uint8_t length) {
+    raw_hid_send(data, length);
+}
+```
+
+`raw_hid_receive` はホストから最大長 `RAW_EPSIZE` の可変サイズのパケットを受信することができます。一方、`raw_hid_send` はパケットを厳密に `RAW_EPSIZE` の長さで送信するため、長さ `RAW_EPSIZE` のデータを使う必要があります。
+
+ホスト側での作業を進める前に、raw 対応のファームウェアを書き込むようにしてください。
+
+## ホスト (Windows/macOS/Linux)
+
+これは幾つかの掘り下げが必要になるため、より複雑な部分です。
+
+ホストコンピュータを raw HID を使ってキーボードに接続するには、キーボードについての4つの情報が必要です。
+
+1. Vendor ID
+2. Product ID
+3. Usage Page
+4. Usage
+
+前半の2つは、キーボードのメインディレクトリにあるキーボードの `config.h` で、`VENDOR_ID` と `PRODUCT_ID` で簡単に見つかります。
+
+後半の2つは、キーボードのメインディレクトリにあるキーボードの `config.h` で、値を再定義することで上書きすることができます: `#define RAW_USAGE_PAGE 0xFF60` と `#define RAW_USAGE_ID 0x61`。
+
+デフォルトでは、**Usage Page** は `0xFF60` で、**Usage** は `0x61` です。
+
+### ホストの構築
+
+独自に作成したくない場合は、利用可能な HID 実装ライブラリがある任意の言語を使ってホストを構築することができます。人気のある言語でよく使われるライブラリは以下の通りです:
+
+* Node: [node-hid](https://github.com/node-hid/node-hid)。
+* C: [hidapi](https://github.com/libusb/hidapi)。
+* Java: [purejavahidapi](https://github.com/nyholku/purejavahidapi) と [hid4java](https://github.com/gary-rowe/hid4java)。
+* Python: [pyhidapi](https://pypi.org/project/hid/)。
+
+これは完全なクロスプラットフォームのリストではありませんが、最初に始めるのに十分なはずです。raw HID を使うための特別な要件は無いため、どの HID ライブラリでも動作するはずです。
+
+これで、キーボードへの HID インタフェースを開くために必要な4つの情報全てが揃いました。必要なのは、ライブラリの利用可能な関数を使って ID パラメータを使ってデバイスを開くことだけです。
+
+Vendor ID と Product ID はデバイスを開くために実際には必要ないことに注意してください。それらは接続した多くの HID デバイスから特定のデバイスをフィルターするためだけに使われます。多くのライブラリでは、代わりに製品名と製造元名を使ってデバイスを開くオプションがあります。`node-hid` が代表的な例です。これは USB ハブが組み込まれているデバイスや、同じ製品名または同じ製造元の複数のインタフェースがある特別な HID インタフェースで問題になります。Product ID と Vendor ID を合わせると単一のインタフェースの固有名を作成できるため、この問題を防げます。したがって、ライブラリで必要が無い場合でも、この問題を防ぐためにそれらを使うことをお勧めします。
+ただし、Vendor ID や Product ID と異なり、Usage Page と Usage は通信を成功させるために必要です。
+
+言うまでもなく、使っているライブラリに関係なく、終了したらインタフェースを必ず閉じる必要があります。オペレーティングシステムと特定の環境によっては、明示的に接続が閉じられていない場合、後で他のクライアントまたは同じクライアントの他のインスタンスに接続しなおした時に問題が発生する可能性があります。

docs/ja/internals_input_callback_reg.md

@@ -171,4 +171,3 @@
 * `device` 関連するデバイス
 
 * `func` 登録するコールバック関数
-

docs/ja/reference_keymap_extras.md

@@ -51,6 +51,7 @@ HID Keyboard/Keypad usage ページでは 256 未満の usage が定義されて
 | Norwegian                   | `keymap_norwegian.h`             |
 | Polish                      | `keymap_polish.h`                |
 | Portuguese                  | `keymap_portuguese.h`            |
+| Portuguese (macOS, ISO)     | `keymap_portuguese_osx_iso.h`    |
 | Portuguese (Brazil)         | `keymap_br_abnt2.h`              |
 | Romanian                    | `keymap_romanian.h`              |
 | Russian*                    | `keymap_russian.h`               |

docs/keycodes.md

@@ -124,17 +124,17 @@ See also: [Basic Keycodes](keycodes_basic.md)
 |`KC_F22`               |                              |F22                                            |✔            |             |✔                |
 |`KC_F23`               |                              |F23                                            |✔            |             |✔                |
 |`KC_F24`               |                              |F24                                            |✔            |             |✔                |
-|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |            |             |✔                |
-|`KC_HELP`              |                              |Help                                           |            |             |✔                |
-|`KC_MENU`              |                              |Menu                                           |            |             |✔                |
-|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |            |             |✔                |
-|`KC_STOP`              |                              |Stop                                           |            |             |✔                |
-|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |            |             |✔                |
-|`KC_UNDO`              |                              |Undo                                           |            |             |✔                |
-|`KC_CUT`               |                              |Cut                                            |            |             |✔                |
-|`KC_COPY`              |                              |Copy                                           |            |             |✔                |
-|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |            |             |✔                |
-|`KC_FIND`              |                              |Find                                           |            |             |✔                |
+|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |             |             |✔                |
+|`KC_HELP`              |                              |Help                                           |             |             |✔                |
+|`KC_MENU`              |                              |Menu                                           |             |             |✔                |
+|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |             |             |✔                |
+|`KC_STOP`              |                              |Stop                                           |             |             |✔                |
+|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |             |             |✔                |
+|`KC_UNDO`              |                              |Undo                                           |             |             |✔                |
+|`KC_CUT`               |                              |Cut                                            |             |             |✔                |
+|`KC_COPY`              |                              |Copy                                           |             |             |✔                |
+|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |             |             |✔                |
+|`KC_FIND`              |                              |Find                                           |             |             |✔                |
 |`KC__MUTE`             |                              |Mute                                           |             |✔            |✔                |
 |`KC__VOLUP`            |                              |Volume Up                                      |             |✔            |✔                |
 |`KC__VOLDOWN`          |                              |Volume Down                                    |             |✔            |✔                |

docs/keycodes_basic.md

@@ -144,48 +144,48 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Commands
 
-|Key               |Aliases                       |Description                   |
-|------------------|------------------------------|------------------------------|
-|`KC_PSCREEN`      |`KC_PSCR`                     |Print Screen                  |
-|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)  |
-|`KC_INSERT`       |`KC_INS`                      |Insert                        |
-|`KC_HOME`         |                              |Home                          |
-|`KC_PGUP`         |                              |Page Up                       |
-|`KC_DELETE`       |`KC_DEL`                      |Forward Delete                |
-|`KC_END`          |                              |End                           |
-|`KC_PGDOWN`       |`KC_PGDN`                     |Page Down                     |
-|`KC_RIGHT`        |`KC_RGHT`                     |Right Arrow                   |
-|`KC_LEFT`         |                              |Left Arrow                    |
-|`KC_DOWN`         |                              |Down Arrow                    |
-|`KC_UP`           |                              |Up Arrow                      |
-|`KC_APPLICATION`  |`KC_APP`                      |Application (Windows Menu Key)|
-|`KC_POWER`        |                              |System Power (macOS/Linux)    |
-|`KC_EXECUTE`      |`KC_EXEC`                     |Execute                       |
-|`KC_HELP`         |                              |Help                          |
-|`KC_MENU`         |                              |Menu                          |
-|`KC_SELECT`       |`KC_SLCT`                     |Select                        |
-|`KC_STOP`         |                              |Stop                          |
-|`KC_AGAIN`        |`KC_AGIN`                     |Again                         |
-|`KC_UNDO`         |                              |Undo                          |
-|`KC_CUT`          |                              |Cut                           |
-|`KC_COPY`         |                              |Copy                          |
-|`KC_PASTE`        |`KC_PSTE`                     |Paste                         |
-|`KC_FIND`         |                              |Find                          |
-|`KC__MUTE`        |                              |Mute (macOS)                  |
-|`KC__VOLUP`       |                              |Volume Up (macOS)             |
-|`KC__VOLDOWN`     |                              |Volume Down (macOS)           |
-|`KC_ALT_ERASE`    |`KC_ERAS`                     |Alternate Erase               |
-|`KC_SYSREQ`       |                              |SysReq/Attention              |
-|`KC_CANCEL`       |                              |Cancel                        |
-|`KC_CLEAR`        |`KC_CLR`                      |Clear                         |
-|`KC_PRIOR`        |                              |Prior                         |
-|`KC_RETURN`       |                              |Return                        |
-|`KC_SEPARATOR`    |                              |Separator                     |
-|`KC_OUT`          |                              |Out                           |
-|`KC_OPER`         |                              |Oper                          |
-|`KC_CLEAR_AGAIN`  |                              |Clear/Again                   |
-|`KC_CRSEL`        |                              |CrSel/Props                   |
-|`KC_EXSEL`        |                              |ExSel                         |
+|Key               |Aliases                       |Description                           |
+|------------------|------------------------------|--------------------------------------|
+|`KC_PSCREEN`      |`KC_PSCR`                     |Print Screen                          |
+|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)          |
+|`KC_INSERT`       |`KC_INS`                      |Insert                                |
+|`KC_HOME`         |                              |Home                                  |
+|`KC_PGUP`         |                              |Page Up                               |
+|`KC_DELETE`       |`KC_DEL`                      |Forward Delete                        |
+|`KC_END`          |                              |End                                   |
+|`KC_PGDOWN`       |`KC_PGDN`                     |Page Down                             |
+|`KC_RIGHT`        |`KC_RGHT`                     |Right Arrow                           |
+|`KC_LEFT`         |                              |Left Arrow                            |
+|`KC_DOWN`         |                              |Down Arrow                            |
+|`KC_UP`           |                              |Up Arrow                              |
+|`KC_APPLICATION`  |`KC_APP`                      |Application (Windows Context Menu Key)|
+|`KC_POWER`        |                              |System Power                          |
+|`KC_EXECUTE`      |`KC_EXEC`                     |Execute                               |
+|`KC_HELP`         |                              |Help                                  |
+|`KC_MENU`         |                              |Menu                                  |
+|`KC_SELECT`       |`KC_SLCT`                     |Select                                |
+|`KC_STOP`         |                              |Stop                                  |
+|`KC_AGAIN`        |`KC_AGIN`                     |Again                                 |
+|`KC_UNDO`         |                              |Undo                                  |
+|`KC_CUT`          |                              |Cut                                   |
+|`KC_COPY`         |                              |Copy                                  |
+|`KC_PASTE`        |`KC_PSTE`                     |Paste                                 |
+|`KC_FIND`         |                              |Find                                  |
+|`KC__MUTE`        |                              |Mute                                  |
+|`KC__VOLUP`       |                              |Volume Up                             |
+|`KC__VOLDOWN`     |                              |Volume Down                           |
+|`KC_ALT_ERASE`    |`KC_ERAS`                     |Alternate Erase                       |
+|`KC_SYSREQ`       |                              |SysReq/Attention                      |
+|`KC_CANCEL`       |                              |Cancel                                |
+|`KC_CLEAR`        |`KC_CLR`                      |Clear                                 |
+|`KC_PRIOR`        |                              |Prior                                 |
+|`KC_RETURN`       |                              |Return                                |
+|`KC_SEPARATOR`    |                              |Separator                             |
+|`KC_OUT`          |                              |Out                                   |
+|`KC_OPER`         |                              |Oper                                  |
+|`KC_CLEAR_AGAIN`  |                              |Clear/Again                           |
+|`KC_CRSEL`        |                              |CrSel/Props                           |
+|`KC_EXSEL`        |                              |ExSel                                 |
 
 ## Media Keys
 
@@ -193,34 +193,34 @@ These keycodes are not part of the Keyboard/Keypad usage page. The `SYSTEM_` key
 
 ?> Some of these keycodes may behave differently depending on the OS. For example, on macOS, the keycodes `KC_MEDIA_FAST_FORWARD`, `KC_MEDIA_REWIND`, `KC_MEDIA_NEXT_TRACK` and `KC_MEDIA_PREV_TRACK` skip within the current track when held, but skip the entire track when tapped.
 
-|Key                    |Aliases  |Description                  |
-|-----------------------|---------|-----------------------------|
-|`KC_SYSTEM_POWER`      |`KC_PWR` |System Power Down            |
-|`KC_SYSTEM_SLEEP`      |`KC_SLEP`|System Sleep                 |
-|`KC_SYSTEM_WAKE`       |`KC_WAKE`|System Wake                  |
-|`KC_AUDIO_MUTE`        |`KC_MUTE`|Mute                         |
-|`KC_AUDIO_VOL_UP`      |`KC_VOLU`|Volume Up                    |
-|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`|Volume Down                  |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track                   |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track               |
-|`KC_MEDIA_STOP`        |`KC_MSTP`|Stop Track (Windows)         |
-|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`|Play/Pause Track             |
-|`KC_MEDIA_SELECT`      |`KC_MSEL`|Launch Media Player (Windows)|
-|`KC_MEDIA_EJECT`       |`KC_EJCT`|Eject (macOS)                |
-|`KC_MAIL`              |         |Launch Mail (Windows)        |
-|`KC_CALCULATOR`        |`KC_CALC`|Launch Calculator (Windows)  |
-|`KC_MY_COMPUTER`       |`KC_MYCM`|Launch My Computer (Windows) |
-|`KC_WWW_SEARCH`        |`KC_WSCH`|Browser Search (Windows)     |
-|`KC_WWW_HOME`          |`KC_WHOM`|Browser Home (Windows)       |
-|`KC_WWW_BACK`          |`KC_WBAK`|Browser Back (Windows)       |
-|`KC_WWW_FORWARD`       |`KC_WFWD`|Browser Forward (Windows)    |
-|`KC_WWW_STOP`          |`KC_WSTP`|Browser Stop (Windows)       |
-|`KC_WWW_REFRESH`       |`KC_WREF`|Browser Refresh (Windows)    |
-|`KC_WWW_FAVORITES`     |`KC_WFAV`|Browser Favorites (Windows)  |
-|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`|Next Track (macOS)           |
-|`KC_MEDIA_REWIND`      |`KC_MRWD`|Previous Track (macOS)       |
-|`KC_BRIGHTNESS_UP`     |`KC_BRIU`|Brightness Up                |
-|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`|Brightness Down              |
+|Key                    |Aliases  |Description        |
+|-----------------------|---------|-------------------|
+|`KC_SYSTEM_POWER`      |`KC_PWR` |System Power Down  |
+|`KC_SYSTEM_SLEEP`      |`KC_SLEP`|System Sleep       |
+|`KC_SYSTEM_WAKE`       |`KC_WAKE`|System Wake        |
+|`KC_AUDIO_MUTE`        |`KC_MUTE`|Mute               |
+|`KC_AUDIO_VOL_UP`      |`KC_VOLU`|Volume Up          |
+|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`|Volume Down        |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track         |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track     |
+|`KC_MEDIA_STOP`        |`KC_MSTP`|Stop Track         |
+|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`|Play/Pause Track   |
+|`KC_MEDIA_SELECT`      |`KC_MSEL`|Launch Media Player|
+|`KC_MEDIA_EJECT`       |`KC_EJCT`|Eject              |
+|`KC_MAIL`              |         |Launch Mail        |
+|`KC_CALCULATOR`        |`KC_CALC`|Launch Calculator  |
+|`KC_MY_COMPUTER`       |`KC_MYCM`|Launch My Computer |
+|`KC_WWW_SEARCH`        |`KC_WSCH`|Browser Search     |
+|`KC_WWW_HOME`          |`KC_WHOM`|Browser Home       |
+|`KC_WWW_BACK`          |`KC_WBAK`|Browser Back       |
+|`KC_WWW_FORWARD`       |`KC_WFWD`|Browser Forward    |
+|`KC_WWW_STOP`          |`KC_WSTP`|Browser Stop       |
+|`KC_WWW_REFRESH`       |`KC_WREF`|Browser Refresh    |
+|`KC_WWW_FAVORITES`     |`KC_WFAV`|Browser Favorites  |
+|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`|Next Track         |
+|`KC_MEDIA_REWIND`      |`KC_MRWD`|Previous Track     |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`|Brightness Up      |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`|Brightness Down    |
 
 ## Number Pad
 
@@ -248,7 +248,7 @@ These keycodes are not part of the Keyboard/Keypad usage page. The `SYSTEM_` key
 
 ## Special Keys
 
-In addition to these, keycodes in the range of `0xA5-DF` are reserved for internal use by TMK.
+In addition to these, keycodes in the range of `0xA5-DF` are reserved for internal use.
 
 |Key             |Aliases             |Description                            |
 |----------------|--------------------|---------------------------------------|

docs/newbs_getting_started.md

@@ -37,26 +37,60 @@ We've tried to make QMK as easy to set up as possible. You only have to prepare
 [Must Know Linux Commands](https://www.guru99.com/must-know-linux-commands.html)<br>
 [Some Basic Unix Commands](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
 
-### Windows
+<!-- tabs:start -->
 
-You will need to install MSYS2, Git, and the QMK CLI.
+### ** Windows **
 
-Follow the installation instructions on the [MSYS2 homepage](http://www.msys2.org). Close any open MSYS terminals and open a new MinGW 64-bit terminal. **NOTE: This is *not* the same as the MSYS terminal that opens when installation is completed.**
+QMK maintains a Bundle of MSYS2, the CLI and all necessary dependencies. It also provides a handy `QMK MSYS` terminal shortcut to boot you directly into the correct environment.
 
-Then, run the following:
+#### Prerequisites
+
+You will need to install `QMK MSYS`. The latest release is available at https://msys.qmk.fm/.
+
+Alternatively, if you'd like to manually install msys2, the following section will walk you through the process.
+
+<details>
+  <summary>Manual Install</summary>
+
+?> Ignore the following steps if you use `QMK MSYS`.
+
+#### Prerequisites
+
+You will need to install MSYS2, Git and Python. Follow the installation instructions on https://www.msys2.org.
+
+Once MSYS2 is installed, close any open MSYS terminals and open a new MinGW 64-bit terminal.
+
+!> **NOTE:** The MinGW 64-bit terminal is *not* the same as the MSYS terminal that opens when installation is completed. Your prompt should say "MINGW64" in purple text, rather than "MSYS". See [this page](https://www.msys2.org/wiki/MSYS2-introduction/#subsystems) for more information on the differences.
+
+Then run the following command:
 
     pacman --needed --noconfirm --disable-download-timeout -S git mingw-w64-x86_64-toolchain mingw-w64-x86_64-python3-pip
+
+#### Installation
+
+Install the QMK CLI by running:
+
     python3 -m pip install qmk
 
-### macOS
+</details>
 
-You will need to install Homebrew. Follow the instructions on the [Homebrew homepage](https://brew.sh).
+### ** macOS **
 
-After Homebrew is installed run this command:
+QMK maintains a Homebrew tap and formula which will automatically install the CLI and all necessary dependencies.
+
+#### Prerequisites
+
+You will need to install Homebrew. Follow the instructions on https://brew.sh.
+
+#### Installation
+
+Install the QMK CLI by running:
 
     brew install qmk/qmk/qmk
 
-### Linux
+### ** Linux/WSL **
+
+#### Prerequisites
 
 You will need to install Git and Python. It's very likely that you already have both, but if not, one of the following commands should install them:
 
@@ -66,30 +100,71 @@ You will need to install Git and Python. It's very likely that you already have
 * Void: `sudo xbps-install -y git python3-pip`
 * Solus: `sudo eopkg -y install git python3`
 * Sabayon: `sudo equo install dev-vcs/git dev-python/pip`
+* Gentoo: `sudo emerge dev-vcs/git dev-python/pip`
 
-Install the global CLI to bootstrap your system:
+#### Installation
 
-`python3 -m pip install --user qmk` (on Arch-based distros you can also try the `qmk` package from AUR (**note**: it's maintained by a community member): `yay -S qmk`)
+Install the QMK CLI by running:
 
-### FreeBSD
+    python3 -m pip install --user qmk
+
+#### Community Packages
+
+These packages are maintained by community members, so may not be up to date or completely functional. If you encounter problems, please report them to their respective maintainers.
+
+On Arch-based distros you can install the CLI from the official repositories (NOTE: at the time of writing this package marks some dependencies as optional that should not be):
+
+    sudo pacman -S qmk
+
+You can also try the `qmk-git` package from AUR:
+
+    yay -S qmk-git
+
+###  ** FreeBSD **
+
+#### Prerequisites
 
 You will need to install Git and Python. It's possible that you already have both, but if not, run the following commands to install them:
 
     pkg install git python3
 
-Make sure that `$HOME/.local/bin` is added to your `$PATH` so that locally install Python packages are available.
+Make sure that `$HOME/.local/bin` is added to your `$PATH` so that locally installed Python packages are available.
 
-Once installed, you can install QMK CLI:
+#### Installation
+
+Install the QMK CLI by running:
 
     python3 -m pip install --user qmk
 
+<!-- tabs:end -->
+
 ## 3. Run QMK Setup :id=set-up-qmk
 
+<!-- tabs:start -->
+
+### ** Windows **
+
 After installing QMK you can set it up with this command:
 
     qmk setup
 
-In most situations you will want to answer Yes to all of the prompts.
+In most situations you will want to answer `y` to all of the prompts.
+
+### ** macOS **
+
+After installing QMK you can set it up with this command:
+
+    qmk setup
+
+In most situations you will want to answer `y` to all of the prompts.
+
+### ** Linux/WSL **
+
+After installing QMK you can set it up with this command:
+
+    qmk setup
+
+In most situations you will want to answer `y` to all of the prompts.
 
 ?>**Note on Debian, Ubuntu and their derivatives**:
 It's possible, that you will get an error saying something like: `bash: qmk: command not found`.
@@ -97,12 +172,22 @@ This is due to a [bug](https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=839155)
 Sadly, Ubuntu reitroduced this bug and is [yet to fix it](https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1588562).
 Luckily, the fix is easy. Run this as your user: `echo 'PATH="$HOME/.local/bin:$PATH"' >> $HOME/.bashrc && source $HOME/.bashrc`
 
+###  ** FreeBSD **
+
+After installing QMK you can set it up with this command:
+
+    qmk setup
+
+In most situations you will want to answer `y` to all of the prompts.
+
 ?>**Note on FreeBSD**:
 It is suggested to run `qmk setup` as a non-`root` user to start with, but this will likely identify packages that need to be installed to your
 base system using `pkg`. However the installation will probably fail when run as an unprivileged user.
 To manually install the base dependencies, run `./util/qmk_install.sh` either as `root`, or with `sudo`.
 Once that completes, re-run `qmk setup` to complete the setup and checks.
 
+<!-- tabs:end -->
+
 ?> If you already know [how to use GitHub](getting_started_github.md), we recommend that you create your own fork and use `qmk setup <github_username>/qmk_firmware` to clone your personal fork. If you don't know what that means you can safely ignore this message.
 
 ## 4. Test Your Build Environment

docs/platformdev_chibios_earlyinit.md

@@ -61,4 +61,4 @@ To implement your own version of this function, in your keyboard's source files:
 void board_init(void) {
     // initialize anything that requires ChibiOS
 }
-```
+```

docs/qmk_custom_dark.css

@@ -27,3 +27,20 @@
 .markdown-section hr, .search {
     border-bottom: 1px solid #777 !important;
 }
+
+
+:root {
+    --docsifytabs-border-color: #555;
+    --docsifytabs-tab-highlight-color: var(--theme-color,#ea6f5a);
+
+    --docsifytabs-tab-background: #444;
+    --docsifytabs-tab-background-active: #3f3f3f;
+}
+
+.docsify-tabs__tab:focus {
+    outline: none !important;
+}
+
+.docsify-tabs__content .anchor {
+    transition: none;
+}

docs/qmk_custom_light.css

@@ -28,3 +28,20 @@
 .markdown-section pre {
   padding: 0;
 }
+
+
+:root {
+  --docsifytabs-border-color: #ddd;
+  --docsifytabs-tab-highlight-color: var(--theme-color, #0074d9);
+
+  --docsifytabs-tab-background: #f8f8f8;
+  --docsifytabs-tab-background-active: transparent;
+}
+
+.docsify-tabs__tab:focus {
+  outline: none !important;
+}
+
+.docsify-tabs__content .anchor {
+  transition: none;
+}

docs/reference_keymap_extras.md

@@ -46,6 +46,7 @@ To use these, simply `#include` the corresponding [header file](https://github.c
 |Norwegian                  |`keymap_norwegian.h`            |
 |Polish                     |`keymap_polish.h`               |
 |Portuguese                 |`keymap_portuguese.h`           |
+|Portuguese (macOS, ISO)    |`keymap_portuguese_osx_iso.h`   |
 |Portuguese (Brazil)        |`keymap_br_abnt2.h`             |
 |Romanian                   |`keymap_romanian.h`             |
 |Russian*                   |`keymap_russian.h`              |

drivers/avr/hd44780.h

@@ -1,5 +1,3 @@
-#ifndef LCD_H
-#define LCD_H
 /*************************************************************************
  Title	:   C include file for the HD44780U LCD library (lcd.c)
  Author:    Peter Fleury <pfleury@gmx.ch>  http://tinyurl.com/peterfleury
@@ -43,6 +41,8 @@
 
 */
 
+#pragma once
+
 #include <inttypes.h>
 #include <avr/pgmspace.h>
 
@@ -346,5 +346,3 @@ extern void lcd_data(uint8_t data);
 #define lcd_puts_P(__s) lcd_puts_p(PSTR(__s))
 
 /**@}*/
-
-#endif  // LCD_H

drivers/avr/i2c_master.h

@@ -17,8 +17,7 @@
  * GitHub repository: https://github.com/g4lvanix/I2C-master-lib
  */
 
-#ifndef I2C_MASTER_H
-#define I2C_MASTER_H
+#pragma once
 
 #define I2C_READ 0x01
 #define I2C_WRITE 0x00
@@ -42,5 +41,3 @@ i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 void         i2c_stop(void);
-
-#endif  // I2C_MASTER_H

drivers/avr/i2c_slave.h

@@ -20,8 +20,7 @@
        Read or write to the necessary buffer according to the opperation.
  */
 
-#ifndef I2C_SLAVE_H
-#define I2C_SLAVE_H
+#pragma once
 
 #define I2C_SLAVE_REG_COUNT 30
 
@@ -29,5 +28,3 @@ extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
 
 void i2c_slave_init(uint8_t address);
 void i2c_slave_stop(void);
-
-#endif  // I2C_SLAVE_H

drivers/avr/ssd1306.h

@@ -1,5 +1,4 @@
-#ifndef SSD1306_H
-#define SSD1306_H
+#pragma once
 
 #include <stdbool.h>
 #include <stdio.h>
@@ -86,5 +85,3 @@ void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
 void matrix_write(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
 void matrix_render(struct CharacterMatrix *matrix);
-
-#endif

drivers/chibios/spi_master.c

@@ -115,11 +115,17 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
     return true;
 }
 
-spi_status_t spi_write(uint8_t data) { return spi_transmit(&data, 1); }
+spi_status_t spi_write(uint8_t data) {
+    uint8_t rxData;
+    spiExchange(&SPI_DRIVER, 1, &data, &rxData);
+
+    return rxData;
+}
 
 spi_status_t spi_read(void) {
     uint8_t data = 0;
-    spi_receive(&data, 1);
+    spiReceive(&SPI_DRIVER, 1, &data);
+
     return data;
 }
 

drivers/haptic/DRV2605L.h

@@ -403,4 +403,4 @@ typedef union DRVREG_CTRL5 { /* register 0x1F */
         uint8_t C5_LRA_AUTO_OPEN_LOOP : 1;
         uint8_t C5_AUTO_OL_CNT : 2;
     } Bits;
-} DRVREG_CTRL5;
+} DRVREG_CTRL5;

drivers/ugfx/gdisp/is31fl3731c/driver.mk

@@ -1,3 +1,3 @@
 GFXINC += drivers/ugfx/gdisp/is31fl3731c
 GFXSRC += drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
-GDISP_DRIVER_LIST += GDISPVMT_IS31FL3731C_QMK
+GDISP_DRIVER_LIST += GDISPVMT_IS31FL3731C_QMK

keyboards/40percentclub/mf68/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
-#define PRODUCT_ID      0x0510
+#define VENDOR_ID       0x3430 // "40"
+#define PRODUCT_ID      0x4D68 // "M68"
 #define DEVICE_VER      0x0101
 #define MANUFACTURER    di0ib
 #define PRODUCT         MF68

keyboards/40percentclub/mf68/keymaps/via/keymap.c

@@ -0,0 +1,49 @@
+/* Copyright 2020 MechMerlin 
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_68_ansi(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_INS,  KC_PGUP,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_PGDN,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT,          KC_UP,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             MO(1),   KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+  [1] = LAYOUT_68_ansi(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC,          KC_VOLU, KC_HOME,
+    _______, _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, _______,          KC_VOLD, KC_END,
+    _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______,          _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, _______,                   _______,          KC_MUTE,
+    _______, _______, _______,                            _______,                            _______, _______, _______,          KC_MPRV, KC_MPLY, KC_MNXT
+  ),
+  [2] = LAYOUT_68_ansi(
+    _______, _______, _______,   _______, _______, _______,   _______, _______, _______,   _______, _______, _______,  _______, _______, _______, _______,
+    _______, _______, _______, _______,   _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______,          _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______,          _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______,    _______,                   _______,          _______,
+    _______, _______, _______,                            _______,                            _______, _______, _______,          _______, _______, _______
+  ),
+  [3] = LAYOUT_68_ansi(
+    _______, _______, _______,   _______, _______, _______,   _______, _______, _______,   _______, _______, _______,  _______, _______, _______, _______,
+    _______, _______, _______, _______,   _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______,          _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______,          _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______,    _______,                   _______,          _______,
+    _______, _______, _______,                            _______,                            _______, _______, _______,          _______, _______, _______
+  )
+};

keyboards/40percentclub/mf68/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/40percentclub/mf68/mf68.h

@@ -16,7 +16,7 @@
     { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \
     { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
     { K60, K61, K62, K63, K64, K65, K66, K67, K68 }, \
-    { K70, K71, K72, K73, K74 } \
+    { K70, K71, K72, K73, K74, KC_NO, KC_NO, KC_NO, KC_NO } \
 }
 
 #define LAYOUT_kc( \

keyboards/40percentclub/mf68/rules.mk

@@ -14,7 +14,7 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
@@ -22,7 +22,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI controls

keyboards/40percentclub/sixpack/config.h

@@ -0,0 +1,122 @@
+/*
+Copyright 2020
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x3430 // "40"
+#define PRODUCT_ID      0x5350 // "SP"
+#define DEVICE_VER      0x1001
+#define MANUFACTURER    di0ib
+#define PRODUCT         Six Pack
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+// #define MATRIX_ROW_PINS { B0 } // B0 equivalents the ground pin
+// #define MATRIX_COL_PINS { E6, D7, C6, D4 }
+#define DIRECT_PINS { \
+    { D4, C6, D7 }, \
+    { E6, B4, B5 }  \
+}
+#define UNUSED_PINS { D1, D0, C4, C5, B1, B2, B3 } // TX, RX, SDA, SCL, PB1, PB2, PB3 on expansion connector
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Backlight */
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_PINS { F4, F5 } // Top Row, Bottom Row
+
+// #define RGB_DI_PIN B1 // PB1 on expansion connector
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/sixpack/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "sixpack",
+    "url": "https://www.40percent.club/2017/05/six-pack-11.html",
+    "maintainer": "qmk",
+    "width": 3,
+    "height": 2,
+    "layouts": {
+        "LAYOUT_ortho_2x3": {
+          "layout": [
+                {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0},
+                {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}
+          ]
+        }
+    }
+}

keyboards/40percentclub/sixpack/keymaps/default/keymap.c

@@ -0,0 +1,31 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Default 2x3 layout
+     * .--------------------------.
+     * |  MUTE  |   UP   |  PLAY  |
+     * |--------+--------+--------+
+     * |  LEFT  |  DOWN  |  RIGHT |
+     * '--------------------------'
+     */
+
+    [0] = LAYOUT_ortho_2x3(/* Default */
+                 KC_MUTE, KC_UP,   KC_MPLY,
+                 KC_LEFT, KC_DOWN, KC_RGHT),
+};

keyboards/40percentclub/sixpack/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Six Pack

keyboards/40percentclub/sixpack/keymaps/fkeys/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Tap Dance declarations
+enum {
+    F13F19,
+    F14F20,
+    F15F21,
+    F16F22,
+    F17F23,
+    F18F24,
+};
+
+// Tap Dance definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+    // Tap once for F13 to F18, twice for F19 to F24
+    [F13F19] = ACTION_TAP_DANCE_DOUBLE(KC_F13, KC_F19), [F14F20] = ACTION_TAP_DANCE_DOUBLE(KC_F14, KC_F20), [F15F21] = ACTION_TAP_DANCE_DOUBLE(KC_F15, KC_F21),
+    [F16F22] = ACTION_TAP_DANCE_DOUBLE(KC_F16, KC_F22), [F17F23] = ACTION_TAP_DANCE_DOUBLE(KC_F17, KC_F23), [F18F24] = ACTION_TAP_DANCE_DOUBLE(KC_F18, KC_F24)
+};
+
+// Add tap dance item in place of a key code
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* 2x3 layout
+     * .-----------------------------.
+     * | F13/F19 | D14/F20 | F15/F21 |
+     * |---------+---------+---------+
+     * | F16/F22 | D17/F23 | F18/F24 |
+     * '-----------------------------'
+     */
+
+    [0] = LAYOUT_ortho_2x3(/* F13 to F24 */
+                 TD(F13F19), TD(F14F20), TD(F15F21),
+		 TD(F16F22), TD(F17F23), TD(F18F24)
+		),
+};

keyboards/40percentclub/sixpack/keymaps/fkeys/readme.md

@@ -0,0 +1 @@
+# F13 to F24 keymap with Tap Dance for Six Pack

keyboards/40percentclub/sixpack/keymaps/fkeys/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/40percentclub/sixpack/keymaps/via/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Default 2x3 layout with 6 Layers
+     * .--------------------------.
+     * |  MUTE  |   UP   |  PLAY  |
+     * |--------+--------+--------+
+     * |  LEFT  |  DOWN  |  RIGHT |
+     * '--------------------------'
+     */
+
+    [0] = LAYOUT_ortho_2x3(KC_MUTE, KC_UP  , KC_MPLY,
+		 KC_LEFT, KC_DOWN, KC_RGHT),
+    [1] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+    [2] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+    [3] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+    [4] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+    [5] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/40percentclub/sixpack/readme.md

@@ -0,0 +1,21 @@
+# Six Pack
+
+![sixpack](https://4.bp.blogspot.com/-sCUGxPAmcu4/WQj4cd9ZlAI/AAAAAAACBhs/174XLIHIfzISucFFEgo53H73HdVJfn3ZwCLcB/s640/IMG_0265.JPG)
+
+A 6-key macropad PCB with its switch and LED pins wired directly to microcontroller IO pins.
+
+You can find the main blog post about this macropad [here](http://www.40percent.club/2017/05/six-pack-11.html), also the Gerber files and other documentation is located [here](https://git.40percent.club/di0ib/Misc/src/branch/master/Six%20Pack).
+
+* Keyboard Maintainer: [The QMK Community](https://github.com/qmk)
+* Hardware Supported: Six Pack PCB, Pro Micro
+* Hardware Availability: [40percent.club](https://git.40percent.club/di0ib/Misc/src/branch/master/Six%20Pack)
+
+Make example for this macropad (after setting up your build environment):
+
+    make 40percentclub/sixpack:default
+
+Flashing example for this keyboard:
+
+    make 40percentclub/sixpack:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/sixpack/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/sixpack/sixpack.c

@@ -0,0 +1,24 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "sixpack.h"
+
+void matrix_init_kb(void) {
+    setPinOutput(B6);  // Backlight cathodes Col.3
+    setPinOutput(F6);  // Backlight cathodes Col.2
+    setPinOutput(F7);  // Backlight cathodes Col.1
+
+    matrix_init_user();
+}

keyboards/40percentclub/sixpack/sixpack.h

@@ -0,0 +1,34 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_2x3( \
+    k00, k01, k02, \
+    k10, k11, k12  \
+) { \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 }  \
+}

keyboards/abacus/keymaps/default/keymap.json

@@ -0,0 +1,10 @@
+{
+  "keyboard": "abacus",
+  "keymap": "default",
+  "layout": "LAYOUT",
+  "layers": [
+    ["KC_ESCAPE", "KC_Q", "KC_W", "KC_E", "KC_R", "KC_T", "KC_Y", "KC_U", "KC_I", "KC_O", "KC_P", "KC_BSPACE", "KC_TAB", "KC_A", "KC_S", "KC_D", "KC_F", "KC_G", "KC_H", "KC_J", "KC_K", "KC_L", "KC_SCOLON", "KC_BSLASH", "KC_LSHIFT", "KC_Z", "KC_X", "KC_C", "KC_V", "KC_B", "KC_N", "KC_M", "KC_COMMA", "KC_DOT", "KC_UP", "KC_DELETE", "KC_LCTRL", "KC_LGUI", "MO(1)", "KC_SPACE", "KC_ENTER", "MO(2)", "KC_LEFT", "KC_DOWN", "KC_RIGHT"],
+    ["KC_GRAVE", "KC_1", "KC_2", "KC_3", "KC_4", "KC_5", "KC_6", "KC_7", "KC_8", "KC_9", "KC_0", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_LBRACKET", "KC_RBRACKET", "KC_QUOTE", "KC_SLASH", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_MINUS", "KC_EQUAL", "KC_TRNS", "KC_TRNS", "KC_LALT", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_HOME", "KC_TRNS", "KC_END"],
+    ["KC_GRV", "KC_F1", "KC_F2", "KC_F3", "KC_F4", "KC_F5", "KC_F6", "KC_F7", "KC_F8", "KC_F9", "KC_F10", "KC_TRNS", "KC_TRNS", "KC_F11", "KC_F12", "RGB_MODE_PLAIN", "RGB_MODE_BREATHE", "RGB_MODE_RAINBOW", "RGB_MODE_SWIRL", "RGB_MODE_SNAKE", "RGB_MODE_KNIGHT", "RGB_MODE_GRADIENT", "KC_NO", "RGB_TOG", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "RGB_HUI", "KC_CAPS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS"]
+  ]
+}

keyboards/abacus/keymaps/unicodemap/rules.mk

@@ -0,0 +1 @@
+UNICODEMAP_ENABLE = yes

keyboards/abacus/rules.mk

@@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-UNICODEMAP_ENABLE = yes
 ENCODER_ENABLE = yes
 DIP_SWITCH_ENABLE = yes
 LTO_ENABLE = yes

keyboards/aleth42/info.json

@@ -0,0 +1,54 @@
+{
+    "keyboard_name": "aleth42", 
+    "url": "http://www.sho-k.co.uk/tech/aleth42", 
+    "maintainer": "monksoffunk", 
+    "width": 12, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1, "w":1.75},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2, "w":1.25},
+                {"x":0, "y":3, "w":1.25},
+                {"x":1.25, "y":3},
+                {"x":2.25, "y":3, "w":1.25},
+                {"x":3.5, "y":3, "w":2.75},
+                {"x":6.25, "y":3, "w":2.25},
+                {"x":8.5, "y":3, "w":1.25},
+                {"x":9.75, "y":3},
+                {"x":10.75, "y":3, "w":1.25}]
+        }
+    }
+}

keyboards/aleth42/keymaps/default/keymap.c

@@ -0,0 +1,149 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    QWERTY = SAFE_RANGE,
+    LOWER,
+    RAISE,
+    ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Default Layer
+     * ,-----------------------------------------------------------.
+     * | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+     * |-----------------------------------------------------------|
+     * | Tab |  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+     * |-----------------------------------------------------------|
+     * | LSft   |  Z |  X |  C |  V |  B |  N |  M |  , |  . |fn(/)|
+     * |-----------------------------------------------------------|
+     * | LCtl | LAlt| LGui|  spc fn0  |  spc fn1    |RGui|RAlt|RCtl|
+     * `-----------------------------------------------------------'
+ */
+    [_QWERTY] = LAYOUT(
+        KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,   KC_BSPC,
+        KC_TAB,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_ENT,
+        KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  LT(_ADJUST, KC_SLSH),
+        KC_LCTL, KC_LALT   , KC_LGUI, LT(_LOWER, KC_SPC),   LT(_RAISE, KC_SPC), KC_RGUI, KC_RALT, KC_RCTL
+        ),
+
+ /* Lower Layer
+     * ,-----------------------------------------------------------.
+     * |  ~ |  ! |  @ |  # |  $ |  % |  ^ |  & |  * |  ( |  ) | Del|
+     * |-----------------------------------------------------------|
+     * |        |    |    |    |    |     | _ | + | { | } |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |          |    |    |    |    |    |   | ;  | '  | Up |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             |Left|Down|Right |
+     * `-----------------------------------------------------------'
+     */
+    [_LOWER] = LAYOUT(
+        KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+		_______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+		_______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_UP,   _______,
+		_______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT
+		),
+
+	/* Raise Layer
+     * ,-----------------------------------------------------------.
+     * |  ` |  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 | Del|
+     * |-----------------------------------------------------------|
+     * |  F1   | F2  | F3 | F4 | F5 |  F6 | - | = | [ | ] |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |    F7    | F8 | F9 | F10| F11| F12|  \ |  \ |   |    |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             |     |    |     |
+     * `-----------------------------------------------------------'
+     */
+    [_RAISE] = LAYOUT(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+		KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______
+		),
+
+	/* Adjust Layer
+     * ,-----------------------------------------------------------.
+     * |Mute| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|F11 |
+     * |-----------------------------------------------------------|
+     * |       |BTOG |BSTP|BINC| MAC|RGBTOG|HUI|WIN|SAI|VAI|  F12  |
+     * |-----------------------------------------------------------|
+     * |   Caps   |Reset|BBRE|BDEC|    |RMOD|HUD |   |SAD|VAD |    |
+     * |-----------------------------------------------------------|
+     * |SLEEP|    |     |           |             |     |    |     |
+     * `-----------------------------------------------------------'
+      */
+    [_ADJUST] = LAYOUT(
+        KC_MUTE, KC_F1,   KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+		_______, BL_TOGG, BL_STEP, BL_INC,  AG_NORM,  RGB_TOG, RGB_HUI, AG_SWAP, RGB_SAI, RGB_VAI,  KC_F12,
+		KC_CAPS, RESET,   BL_BRTG, BL_DEC,  _______,  RGB_MOD, RGB_HUD, _______, RGB_SAD, RGB_VAD,  _______,
+		KC_SLEP, _______, _______, _______, _______, _______, _______, _______
+		),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left encoder */
+        switch (get_highest_layer(layer_state)) {
+            case _QWERTY:
+                if (clockwise) {
+                    tap_code(KC_TAB);
+                } else {
+                    tap_code16(S(KC_TAB));
+                }
+                break;
+            case _RAISE:
+                if (clockwise) {
+                //    tap_code(KC_VOLU);
+                    if(keymap_config.swap_lalt_lgui==false){
+                        tap_code(KC_LANG2);
+                    }else {
+                        tap_code16(A(KC_GRV));
+                    }
+                } else {
+                    if(keymap_config.swap_lalt_lgui==false){
+                    tap_code(KC_LANG1);
+                    } else {
+                        tap_code16(A(KC_GRV));
+                    }
+                }
+                break;
+            case _ADJUST:
+                if (clockwise) {
+                    tap_code(KC_VOLU);
+                } else {
+                    tap_code(KC_VOLD);
+            }
+        }
+
+    } else if (index == 1) { /* Right encoder */
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
+}

keyboards/aleth42/keymaps/default/readme.md

@@ -0,0 +1,50 @@
+# The default keymap for aleth42
+
+Default Layer
+
+    ,-----------------------------------------------------------.
+    | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+    |-----------------------------------------------------------|
+    | Tab |  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+    |-----------------------------------------------------------|
+    | LSft   |  Z |  X |  C |  V |  B |  N |  M |  , |  . |fn(/)|
+    |-----------------------------------------------------------|
+    | Lctl | LAlt| LGui|  spc fn0  |  spc fn1    |RGui|RAlt|RCtl|
+    `-----------------------------------------------------------'
+
+Lower Layer = fn0
+
+    ,-----------------------------------------------------------.
+    |  ~ |  ! |  @ |  # |  $ |  % |  ^ |  & |  * |  ( |  ) | Del|
+    |-----------------------------------------------------------|
+    |        |    |    |    |    |     | _ | + | { | } |  Pipe  |
+    |-----------------------------------------------------------|
+    |          |    |    |    |    |    |   | ;  | '  | Up |    |
+    |-----------------------------------------------------------|
+    |     |    |     |           |             |Left|Down|Right |
+    `-----------------------------------------------------------'
+
+Raise Layer = fn1
+
+    ,-----------------------------------------------------------.
+    |  ` |  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 | Del|
+    |-----------------------------------------------------------|
+    |  F1   | F2  | F3 | F4 | F5 |  F6 | - | = | [ | ] |  Pipe  |
+    |-----------------------------------------------------------|
+    |    F7    | F8 | F9 | F10| F11| F12|  \ |  \ |   |    |    |
+    |-----------------------------------------------------------|
+    |     |    |     |           |             |     |    |     |
+    `-----------------------------------------------------------'
+
+Adjust Layer = fn
+
+    ,-----------------------------------------------------------.
+    |Mute| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|F11 |
+    |-----------------------------------------------------------|
+    |       |BTOG |BSTP|BINC| MAC|RGBTOG|HUI|WIN|SAI|VAI|  F12  |
+    |-----------------------------------------------------------|
+    |   Caps   |Reset|BBRE|BDEC|    |RMOD|HUD |   |SAD|VAD |    |
+    |-----------------------------------------------------------|
+    |SLEEP|    |     |           |             |     |    |     |
+    `-----------------------------------------------------------'
+ 

keyboards/aleth42/keymaps/via/config.h

@@ -0,0 +1,22 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+// #define TAPPING_TERM 200
+#define PERMISSIVE_HOLD
+#define ENCODER_RESOLUTION 2

keyboards/aleth42/keymaps/via/keymap.c

@@ -0,0 +1,149 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    QWERTY = SAFE_RANGE,
+    LOWER,
+    RAISE,
+    ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Default Layer
+     * ,-----------------------------------------------------------.
+     * | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+     * |-----------------------------------------------------------|
+     * | Tab |  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+     * |-----------------------------------------------------------|
+     * | LSft   |  Z |  X |  C |  V |  B |  N |  M |  , |  . |fn(/)|
+     * |-----------------------------------------------------------|
+     * | Esc  | LAlt| LGui|  spc fn0  |  spc fn1    |RGui|RAlt|RCtl|
+     * `-----------------------------------------------------------'
+ */
+    [_QWERTY] = LAYOUT(
+        KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,   KC_BSPC,
+        MT(MOD_LCTL, KC_TAB),  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_ENT,
+        KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  LT(_ADJUST, KC_SLSH),
+        MT(MOD_LCTL, KC_ESC), KC_LALT   , KC_LGUI, LT(_LOWER, KC_SPC),   LT(_RAISE, KC_SPC), KC_RGUI, KC_RALT, KC_RCTL
+        ),
+
+ /* Lower Layer
+     * ,-----------------------------------------------------------.
+     * |  ~ |  ! |  @ |  # |  $ |  % |  ^ |  & |  * |  ( |  ) | Del|
+     * |-----------------------------------------------------------|
+     * |        |    |    |    |    |     | _ | + | { | } |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |          |    |    |    |    |    |   | ;  | '  | Up |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             |Left|Down|Right |
+     * `-----------------------------------------------------------'
+     */
+    [_LOWER] = LAYOUT(
+        KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+		_______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+		_______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_UP,   _______,
+		_______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT
+		),
+
+	/* Raise Layer
+     * ,-----------------------------------------------------------.
+     * |  ` |  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 | Del|
+     * |-----------------------------------------------------------|
+     * |  F1   | F2  | F3 | F4 | F5 |  F6 | - | = | [ | ] |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |    F7    | F8 | F9 | F10| F11| F12|  \ |  \ |   |    |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             |     |    |     |
+     * `-----------------------------------------------------------'
+     */
+    [_RAISE] = LAYOUT(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+		KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______
+		),
+
+	/* Adjust Layer
+     * ,-----------------------------------------------------------.
+     * |Mute| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|F11 |
+     * |-----------------------------------------------------------|
+     * |       |BTOG |BSTP|BINC| MAC|RGBTOG|HUI|WIN|SAI|VAI|  F12  |
+     * |-----------------------------------------------------------|
+     * |   Caps   |Reset|BBRE|BDEC|    |RMOD|HUD |   |SAD|VAD |    |
+     * |-----------------------------------------------------------|
+     * |SLEEP|    |     |           |             |     |    |     |
+     * `-----------------------------------------------------------'
+      */
+    [_ADJUST] = LAYOUT(
+        KC_MUTE, KC_F1,   KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+		_______, BL_TOGG, BL_STEP, BL_INC,  AG_NORM,  RGB_TOG, RGB_HUI, AG_SWAP, RGB_SAI, RGB_VAI,  KC_F12,
+		KC_CAPS, RESET,   BL_BRTG, BL_DEC,  _______,  RGB_MOD, RGB_HUD, _______, RGB_SAD, RGB_VAD,  _______,
+		KC_SLEP, _______, _______, _______, _______, _______, _______, _______
+		),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left encoder */
+        switch (get_highest_layer(layer_state)) {
+            case _QWERTY:
+                if (clockwise) {
+                    tap_code(KC_TAB);
+                } else {
+                    tap_code16(S(KC_TAB));
+                }
+                break;
+            case _RAISE:
+                if (clockwise) {
+                //    tap_code(KC_VOLU);
+                    if(keymap_config.swap_lalt_lgui==false){
+                        tap_code(KC_LANG2);
+                    }else {
+                        tap_code16(A(KC_GRV));
+                    }
+                } else {
+                    if(keymap_config.swap_lalt_lgui==false){
+                    tap_code(KC_LANG1);
+                    } else {
+                        tap_code16(A(KC_GRV));
+                    }
+                }
+                    break;
+            case _ADJUST:
+                if (clockwise) {
+                    tap_code(KC_VOLU);
+                } else {
+                    tap_code(KC_VOLD);
+            }
+        }
+
+    } else if (index == 1) { /* Right encoder */
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
+}

keyboards/aleth42/keymaps/via/readme.md

@@ -0,0 +1,56 @@
+# The VIA keymap for aleth42
+
+Default Layer
+
+    ,-----------------------------------------------------------.
+    | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+    |-----------------------------------------------------------|
+    | Tab*|  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+    |-----------------------------------------------------------|
+    | LSft   |  Z |  X |  C |  V |  B |  N |  M |  , |  . |fn(/)|
+    |-----------------------------------------------------------|
+    | Esc* | LAlt| LGui|  spc fn0  |  spc fn1    |RGui|RAlt|RCtl|
+    `-----------------------------------------------------------'
+
+Tab* would activate Left Control when held, and send Tab when tapped.
+
+Esc* would activate Left Control when held, and send Escape when tapped.
+
+Esc* is useful with a rotary encoder @ upper-left Esc location.
+
+Lower Layer = fn0
+
+    ,-----------------------------------------------------------.
+    |  ~ |  ! |  @ |  # |  $ |  % |  ^ |  & |  * |  ( |  ) | Del|
+    |-----------------------------------------------------------|
+    |        |    |    |    |    |     | _ | + | { | } |  Pipe  |
+    |-----------------------------------------------------------|
+    |          |    |    |    |    |    |   | ;  | '  | Up |    |
+    |-----------------------------------------------------------|
+    |     |    |     |           |             |Left|Down|Right |
+    `-----------------------------------------------------------'
+
+Raise Layer = fn1
+
+    ,-----------------------------------------------------------.
+    |  ` |  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 | Del|
+    |-----------------------------------------------------------|
+    |  F1   | F2  | F3 | F4 | F5 |  F6 | - | = | [ | ] |  Pipe  |
+    |-----------------------------------------------------------|
+    |    F7    | F8 | F9 | F10| F11| F12|  \ |  \ |   |    |    |
+    |-----------------------------------------------------------|
+    |     |    |     |           |             |     |    |     |
+    `-----------------------------------------------------------'
+
+Adjust Layer = fn
+
+    ,-----------------------------------------------------------.
+    |Mute| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|F11 |
+    |-----------------------------------------------------------|
+    |       |BTOG |BSTP|BINC| MAC|RGBTOG|HUI|WIN|SAI|VAI|  F12  |
+    |-----------------------------------------------------------|
+    |   Caps   |Reset|BBRE|BDEC|    |RMOD|HUD |   |SAD|VAD |    |
+    |-----------------------------------------------------------|
+    |SLEEP|    |     |           |             |     |    |     |
+    `-----------------------------------------------------------'
+ 

keyboards/aleth42/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+CONSOLE_ENABLE = no

keyboards/aleth42/readme.md

@@ -0,0 +1,15 @@
+# ALETH42
+
+![ALETH42](https://i.imgur.com/6hJVBQl.png)
+
+40% keyboard with rotary encoder (optional)
+
+* Keyboard Maintainer: [monksoffunk](https://github.com/monksoffunk/) [@monksoffunkJP](https://twitter.com/monksoffunkJP)
+* Hardware Supported: ALETH42 PCB
+* Hardware Availability: [twitter](https://twitter.com/monksoffunkJP), [Booth](https://25keys.booth.pm/items/2420095)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aleth42:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aleth42/rev0/config.h

@@ -0,0 +1,82 @@
+/*
+Copyright 2020 monksoffunk
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x04D8
+#define PRODUCT_ID 0xEAC8
+#define DEVICE_VER 0x0000
+#define MANUFACTURER 25KEYS
+#define PRODUCT ALETH42
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D6, C2, C4, C5, C6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define ENCODERS_PAD_A { B6, B5 }  // located @ upper left
+#define ENCODERS_PAD_B { B7, B4 }  // located @ bottom left
+
+#define RGB_DI_PIN C7
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 6
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+ /*== all animations enable ==*/
+   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/aleth42/rev0/readme.md

@@ -0,0 +1,15 @@
+# ALETH42
+
+![ALETH42](https://i.imgur.com/6hJVBQl.png)
+
+40% keyboard with rotary encoder (optional)
+
+* Keyboard Maintainer: [monksoffunk](https://github.com/monksoffunk/) [@monksoffunkJP](https://twitter.com/monksoffunkJP)
+* Hardware Supported: ALETH42 PCB
+* Hardware Availability: [twitter](https://twitter.com/monksoffunkJP)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aleth42:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aleth42/rev0/rev0.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev0.h"

keyboards/aleth42/rev0/rev0.h

@@ -0,0 +1,54 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+// for readability
+#define XXX KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+/* ALETH42 layout
+ * ,-----------------------------------------------------------.
+ * | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 38 |
+ * |-----------------------------------------------------------|
+ * | 10   | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A    |
+ * |-----------------------------------------------------------|
+ * | 20     | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A  |
+ * |-----------------------------------------------------------|
+ * | 30 | 31  | 32  |    33     |      34     | 35  | 36 | 37  |
+ * `-----------------------------------------------------------'
+ */
+#define LAYOUT( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k38,\
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A,\
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A,\
+  k30, k31, k32, k33, k34, k35, k36, k37\
+) \
+{ \
+  { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A },\
+  { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A },\
+  { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A },\
+  { k30, k31, k32, k33, k34, k35, k36, k37, XXX, XXX, k38 }\
+}

keyboards/aleth42/rev0/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+ENCODER_ENABLE = yes
+TAP_DANCE_ENABLE = no

keyboards/aleth42/rev1/config.h

@@ -0,0 +1,82 @@
+/*
+Copyright 2020 monksoffunk
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x04D8
+#define PRODUCT_ID 0xEAC8
+#define DEVICE_VER 0x0001
+#define MANUFACTURER 25KEYS
+#define PRODUCT ALETH42
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B4, B0, B2, B1 }
+#define MATRIX_COL_PINS { D5, D3, D2, D1, D0, D6, D4, F7, F0, F1, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define ENCODERS_PAD_A { B5, F5 }
+#define ENCODERS_PAD_B { B6, F6 }
+
+#define BACKLIGHT_PIN C6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 8
+
+#define RGB_DI_PIN B3
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 8
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+ /*== all animations enable ==*/
+   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/aleth42/rev1/readme.md

@@ -0,0 +1,15 @@
+# ALETH42
+
+![ALETH42](https://i.imgur.com/6hJVBQl.png)
+
+40% keyboard with rotary encoder (optional)
+
+* Keyboard Maintainer: [monksoffunk](https://github.com/monksoffunk/) [@monksoffunkJP](https://twitter.com/monksoffunkJP)
+* Hardware Supported: ALETH42 PCB
+* Hardware Availability: [twitter](https://twitter.com/monksoffunkJP), [Booth](https://25keys.booth.pm/items/2420095)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aleth42:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aleth42/rev1/rev1.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev1.h"

keyboards/aleth42/rev1/rev1.h

@@ -0,0 +1,54 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+// for readability
+#define XXX KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+/* ALETH42 layout
+ * ,-----------------------------------------------------------.
+ * | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 38 |
+ * |-----------------------------------------------------------|
+ * | 10   | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A    |
+ * |-----------------------------------------------------------|
+ * | 20     | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A  |
+ * |-----------------------------------------------------------|
+ * | 30 | 31  | 32  |    33     |      34     | 35  | 36 | 37  |
+ * `-----------------------------------------------------------'
+ */
+#define LAYOUT( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k38,\
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A,\
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A,\
+  k30, k31, k32, k33, k34, k35, k36, k37\
+) \
+{ \
+  { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A },\
+  { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A },\
+  { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A },\
+  { k30, k31, k32, k33, k34, k35, k36, k37, XXX, XXX, k38 }\
+}

keyboards/aleth42/rev1/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+ENCODER_ENABLE = yes
+TAP_DANCE_ENABLE = no

keyboards/aleth42/rules.mk

@@ -0,0 +1 @@
+DEFAULT_FOLDER = aleth42/rev1

keyboards/alpine65/alpine65.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2020 Álvaro "Gondolindrim" Volpato  <gondolindrim@acheronproject.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "alpine65.h"