Slightly more prominent LUFA Mass-storage bootloader warning. (#13163 )

Add support for LAZYDESIGNERS/THE60/rev2 (#13015 )
Co-authored-by: Erovia <Erovia@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
2025-08-08 22:05:05 +00:00 · 2021-06-10 16:05:29 +10:00 · 2021-06-09 19:47:37 +02:00 · 2021-06-09 19:14:44 +10:00 · 2021-06-09 17:25:21 +10:00 · 2021-06-09 00:18:56 -07:00
356 changed files with 12207 additions and 541 deletions
--- a/bootloader.mk
+++ b/bootloader.mk
@@ -92,10 +92,14 @@ ifeq ($(strip $(BOOTLOADER)), lufa-ms)
    OPT_DEFS += -DBOOTLOADER_MS
    BOOTLOADER_SIZE = 6144
    FIRMWARE_FORMAT = bin
-    $(info LUFA MASS STORAGE Bootloader selected)
-    $(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!)
-    $(info It is extremely prone to bricking, and is only included to support existing boards.)
-    $(info )
+cpfirmware: lufa_warning
+.INTERMEDIATE: lufa_warning
+lufa_warning: $(FIRMWARE_FORMAT)
+	$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
+	$(info LUFA MASS STORAGE Bootloader selected)
+	$(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!)
+	$(info It is extremely prone to bricking, and is only included to support existing boards.)
+	$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
 endif
 ifdef BOOTLOADER_SIZE
    OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
--- a/docs/_summary.md
+++ b/docs/_summary.md
@@ -108,6 +108,7 @@
    * [Haptic Feedback](feature_haptic_feedback.md)
    * [Joystick](feature_joystick.md)
    * [LED Indicators](feature_led_indicators.md)
+    * [MIDI](feature_midi.md)
    * [Proton C Conversion](proton_c_conversion.md)
    * [PS/2 Mouse](feature_ps2_mouse.md)
    * [Split Keyboard](feature_split_keyboard.md)
--- a/docs/feature_audio.md
+++ b/docs/feature_audio.md
@@ -301,8 +301,7 @@ You can configure the default, min and max frequencies, the stepping and built i

 ## MIDI Functionality

-This is still a WIP, but check out `quantum/process_keycode/process_midi.c` to see what's happening. Enable from the Makefile.
-
+See [MIDI](feature_midi.md)

 ## Audio Keycodes

@@ -319,114 +318,3 @@ This is still a WIP, but check out `quantum/process_keycode/process_midi.c` to s
 |`MU_OFF`        |         |Turns off Music Mode              |
 |`MU_TOG`        |         |Toggles Music Mode                |
 |`MU_MOD`        |         |Cycles through the music modes    |
-
-<!-- FIXME: this formatting needs work
-
-## Audio
-
-```c
-#ifdef AUDIO_ENABLE
-    AU_ON,
-    AU_OFF,
-    AU_TOG,
-
-    // Music mode on/off/toggle
-    MU_ON,
-    MU_OFF,
-    MU_TOG,
-
-    // Music voice iterate
-    MUV_IN,
-    MUV_DE,
-#endif
-```
-
-### Midi
-
-#if !MIDI_ENABLE_STRICT || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))
-    MI_ON,  // send midi notes when music mode is enabled
-    MI_OFF, // don't send midi notes when music mode is enabled
-#endif
-
-MIDI_TONE_MIN,
-MIDI_TONE_MAX
-
-MI_C = MIDI_TONE_MIN,
-MI_Cs,
-MI_Db = MI_Cs,
-MI_D,
-MI_Ds,
-MI_Eb = MI_Ds,
-MI_E,
-MI_F,
-MI_Fs,
-MI_Gb = MI_Fs,
-MI_G,
-MI_Gs,
-MI_Ab = MI_Gs,
-MI_A,
-MI_As,
-MI_Bb = MI_As,
-MI_B,
-
-MIDI_TONE_KEYCODE_OCTAVES > 1
-
-where x = 1-5:
-MI_C_x,
-MI_Cs_x,
-MI_Db_x = MI_Cs_x,
-MI_D_x,
-MI_Ds_x,
-MI_Eb_x = MI_Ds_x,
-MI_E_x,
-MI_F_x,
-MI_Fs_x,
-MI_Gb_x = MI_Fs_x,
-MI_G_x,
-MI_Gs_x,
-MI_Ab_x = MI_Gs_x,
-MI_A_x,
-MI_As_x,
-MI_Bb_x = MI_As_x,
-MI_B_x,
-
-MI_OCT_Nx 1-2
-MI_OCT_x 0-7
-MIDI_OCTAVE_MIN = MI_OCT_N2,
-MIDI_OCTAVE_MAX = MI_OCT_7,
-MI_OCTD, // octave down
-MI_OCTU, // octave up
-
-MI_TRNS_Nx 1-6
-MI_TRNS_x 0-6
-MIDI_TRANSPOSE_MIN = MI_TRNS_N6,
-MIDI_TRANSPOSE_MAX = MI_TRNS_6,
-MI_TRNSD, // transpose down
-MI_TRNSU, // transpose up
-
-MI_VEL_x 1-10
-MIDI_VELOCITY_MIN = MI_VEL_1,
-MIDI_VELOCITY_MAX = MI_VEL_9,
-MI_VELD, // velocity down
-MI_VELU, // velocity up
-
-MI_CHx 1-16
-MIDI_CHANNEL_MIN = MI_CH1
-MIDI_CHANNEL_MAX = MI_CH16,
-MI_CHD, // previous channel
-MI_CHU, // next channel
-
-MI_ALLOFF, // all notes off
-
-MI_SUS, // sustain
-MI_PORT, // portamento
-MI_SOST, // sostenuto
-MI_SOFT, // soft pedal
-MI_LEG,  // legato
-
-MI_MOD, // modulation
-MI_MODSD, // decrease modulation speed
-MI_MODSU, // increase modulation speed
-#endif // MIDI_ADVANCED
-
-->
--- a/docs/feature_midi.md
+++ b/docs/feature_midi.md
@@ -0,0 +1,260 @@
+# MIDI
+
+## Usage
+
+First, enable MIDI by adding the following to your `rules.mk`:
+
+```makefile
+MIDI_ENABLE = yes
+```
+
+There are two MIDI systems in QMK: basic and advanced. With basic MIDI you will only be able to send Note On and Note Off messages using the note keycodes, meaning that keycodes like `MI_OCTU` and `MI_OCTD` will not work. Advanced MIDI allows you to do things like octave shifts, channel changes, velocity changes, modulation, and more.
+
+### Basic MIDI
+
+To enable basic MIDI, add the following to your `config.h`:
+
+```c
+#define MIDI_BASIC
+```
+
+### Advanced MIDI
+
+To enable advanced MIDI, add the following to your `config.h`:
+
+```c
+#define MIDI_ADVANCED
+```
+
+#### Sending Control Change (CC) Messages
+
+If you're aiming to emulate the features of something like a Launchpad or other MIDI controller you'll need to access the internal MIDI device directly.
+
+Because there are so many possible CC messages, not all of them are implemented as keycodes. Additionally, you might need to provide more than just two values that you would get from a keycode (pressed and released) - for example, the analog values from a fader or a potentiometer. So, you will need to implement [custom keycodes](feature_macros.md) if you want to use them in your keymap directly using `process_record_user()`.
+
+
+For reference of all the possible control code numbers see [MIDI Specification](#midi-specification)
+
+#### Example code for using Generic On Off Switches as per MIDI Specification.
+```c
+#include QMK_KEYBOARD_H
+
+extern MidiDevice midi_device;
+
+// MIDI CC codes for generic on/off switches (80, 81, 82, 83)
+// Off: 0-63
+// On:  64-127
+
+#define MIDI_CC_OFF 0
+#define MIDI_CC_ON  127
+
+enum custom_keycodes {
+    MIDI_CC80 = SAFE_RANGE,
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case MIDI_CC80:
+            if (record->event.pressed) {
+                midi_send_cc(&midi_device, midi_config.channel, 80, ON);
+            } else {
+                midi_send_cc(&midi_device, midi_config.channel, 80, OFF);
+            }
+            return true;
+    }
+    return true;
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    LAYOUT(
+        // ...
+        MIDI_CC80,
+        // ...
+    )
+};
+```
+
+### Keycodes
+
+|Keycode     |Aliases  |Description                      |
+|------------|---------|---------------------------------|
+|`MI_ON`     |         |Turn MIDI on                     |
+|`MI_OFF`    |         |Turn MIDI off                    |
+|`MI_TOG`    |         |Toggle MIDI enabled              |
+|`MI_C`      |         |C octave 0                       |
+|`MI_Cs`     |`MI_Db`  |C♯/D♭ octave 0                   |
+|`MI_D`      |         |D octave 0                       |
+|`MI_Ds`     |`MI_Eb`  |D♯/E♭ octave 0                   |
+|`MI_E`      |         |E octave 0                       |
+|`MI_F`      |         |F octave 0                       |
+|`MI_Fs`     |`MI_Gb`  |F♯/G♭ octave 0                   |
+|`MI_G`      |         |G octave 0                       |
+|`MI_Gs`     |`MI_Gs`  |G♯/A♭ octave 0                   |
+|`MI_A`      |         |A octave 0                       |
+|`MI_As`     |`MI_Bb`  |A♯/B♭ octave 0                   |
+|`MI_B`      |         |B octave 0                       |
+|`MI_C_1`    |         |C octave 1                       |
+|`MI_Cs_1`   |`MI_Db_1`|C♯/D♭ octave 1                   |
+|`MI_D_1`    |         |D octave 1                       |
+|`MI_Ds_1`   |`MI_Eb_1`|D♯/E♭ octave 1                   |
+|`MI_E_1`    |         |E octave 1                       |
+|`MI_F_1`    |         |F octave 1                       |
+|`MI_Fs_1`   |`MI_Gb_1`|F♯/G♭ octave 1                   |
+|`MI_G_1`    |         |G octave 1                       |
+|`MI_Gs_1`   |`MI_Ab_1`|G♯/A♭ octave 1                   |
+|`MI_A_1`    |         |A octave 1                       |
+|`MI_As_1`   |`MI_Bb_1`|A♯/B♭ octave 1                   |
+|`MI_B_1`    |         |B octave 1                       |
+|`MI_C_2`    |         |C octave 2                       |
+|`MI_Cs_2`   |`MI_Db_2`|C♯/D♭ octave 2                   |
+|`MI_D_2`    |         |D octave 2                       |
+|`MI_Ds_2`   |`MI_Eb_2`|D♯/E♭ octave 2                   |
+|`MI_E_2`    |         |E octave 2                       |
+|`MI_F_2`    |         |F octave 2                       |
+|`MI_Fs_2`   |`MI_Gb_2`|F♯/G♭ octave 2                   |
+|`MI_G_2`    |         |G octave 2                       |
+|`MI_Gs_2`   |`MI_Ab_2`|G♯/A♭ octave 2                   |
+|`MI_A_2`    |         |A octave 2                       |
+|`MI_As_2`   |`MI_Bb_2`|A♯/B♭ octave 2                   |
+|`MI_B_2`    |         |B octave 2                       |
+|`MI_C_3`    |         |C octave 3                       |
+|`MI_Cs_3`   |`MI_Db_3`|C♯/D♭ octave 3                   |
+|`MI_D_3`    |         |D octave 3                       |
+|`MI_Ds_3`   |`MI_Eb_3`|D♯/E♭ octave 3                   |
+|`MI_E_3`    |         |E octave 3                       |
+|`MI_F_3`    |         |F octave 3                       |
+|`MI_Fs_3`   |`MI_Gb_3`|F♯/G♭ octave 3                   |
+|`MI_G_3`    |         |G octave 3                       |
+|`MI_Gs_3`   |`MI_Ab_3`|G♯/A♭ octave 3                   |
+|`MI_A_3`    |         |A octave 3                       |
+|`MI_As_3`   |`MI_Bb_3`|A♯/B♭ octave 3                   |
+|`MI_B_3`    |         |B octave 3                       |
+|`MI_C_4`    |         |C octave 4                       |
+|`MI_Cs_4`   |`MI_Db_4`|C♯/D♭ octave 4                   |
+|`MI_D_4`    |         |D octave 4                       |
+|`MI_Ds_4`   |`MI_Eb_4`|D♯/E♭ octave 4                   |
+|`MI_E_4`    |         |E octave 4                       |
+|`MI_F_4`    |         |F octave 4                       |
+|`MI_Fs_4`   |`MI_Gb_4`|F♯/G♭ octave 4                   |
+|`MI_G_4`    |         |G octave 4                       |
+|`MI_Gs_4`   |`MI_Ab_4`|G♯/A♭ octave 4                   |
+|`MI_A_4`    |         |A octave 4                       |
+|`MI_As_4`   |`MI_Bb_4`|A♯/B♭ octave 4                   |
+|`MI_B_4`    |         |B octave 4                       |
+|`MI_C_5`    |         |C octave 5                       |
+|`MI_Cs_5`   |`MI_Db_5`|C♯/D♭ octave 5                   |
+|`MI_D_5`    |         |D octave 5                       |
+|`MI_Ds_5`   |`MI_Eb_5`|D♯/E♭ octave 5                   |
+|`MI_E_5`    |         |E octave 5                       |
+|`MI_F_5`    |         |F octave 5                       |
+|`MI_Fs_5`   |`MI_Gb_5`|F♯/G♭ octave 5                   |
+|`MI_G_5`    |         |G octave 5                       |
+|`MI_Gs_5`   |`MI_Ab_5`|G♯/A♭ octave 5                   |
+|`MI_A_5`    |         |A octave 5                       |
+|`MI_As_5`   |`MI_Bb_5`|A♯/B♭ octave 5                   |
+|`MI_B_5`    |         |B octave 5                       |
+|`MI_OCT_N2` |         |Set octave to -2                 |
+|`MI_OCT_N1` |         |Set octave to -1                 |
+|`MI_OCT_0`  |         |Set octave to 0                  |
+|`MI_OCT_1`  |         |Set octave to 1                  |
+|`MI_OCT_2`  |         |Set octave to 2                  |
+|`MI_OCT_3`  |         |Set octave to 3                  |
+|`MI_OCT_4`  |         |Set octave to 4                  |
+|`MI_OCT_5`  |         |Set octave to 5                  |
+|`MI_OCT_6`  |         |Set octave to 6                  |
+|`MI_OCT_7`  |         |Set octave to 7                  |
+|`MI_OCTD`   |         |Move down an octave              |
+|`MI_OCTU`   |         |Move up an octave                |
+|`MI_TRNS_N6`|         |Set transposition to -6 semitones|
+|`MI_TRNS_N5`|         |Set transposition to -5 semitones|
+|`MI_TRNS_N4`|         |Set transposition to -4 semitones|
+|`MI_TRNS_N3`|         |Set transposition to -3 semitones|
+|`MI_TRNS_N2`|         |Set transposition to -2 semitones|
+|`MI_TRNS_N1`|         |Set transposition to -1 semitone |
+|`MI_TRNS_0` |         |No transposition                 |
+|`MI_TRNS_1` |         |Set transposition to +1 semitone |
+|`MI_TRNS_2` |         |Set transposition to +2 semitones|
+|`MI_TRNS_3` |         |Set transposition to +3 semitones|
+|`MI_TRNS_4` |         |Set transposition to +4 semitones|
+|`MI_TRNS_5` |         |Set transposition to +5 semitones|
+|`MI_TRNS_6` |         |Set transposition to +6 semitones|
+|`MI_TRNSD`  |         |Decrease transposition           |
+|`MI_TRNSU`  |         |Increase transposition           |
+|`MI_VEL_0`  |         |Set velocity to 0                |
+|`MI_VEL_1`  |         |Set velocity to 12               |
+|`MI_VEL_2`  |         |Set velocity to 25               |
+|`MI_VEL_3`  |         |Set velocity to 38               |
+|`MI_VEL_4`  |         |Set velocity to 51               |
+|`MI_VEL_5`  |         |Set velocity to 64               |
+|`MI_VEL_6`  |         |Set velocity to 76               |
+|`MI_VEL_7`  |         |Set velocity to 89               |
+|`MI_VEL_8`  |         |Set velocity to 102              |
+|`MI_VEL_9`  |         |Set velocity to 114              |
+|`MI_VEL_10` |         |Set velocity to 127              |
+|`MI_VELD`   |         |Decrease velocity                |
+|`MI_VELU`   |         |Increase velocity                |
+|`MI_CH1`    |         |Set channel to 1                 |
+|`MI_CH2`    |         |Set channel to 2                 |
+|`MI_CH3`    |         |Set channel to 3                 |
+|`MI_CH4`    |         |Set channel to 4                 |
+|`MI_CH5`    |         |Set channel to 5                 |
+|`MI_CH6`    |         |Set channel to 6                 |
+|`MI_CH7`    |         |Set channel to 7                 |
+|`MI_CH8`    |         |Set channel to 8                 |
+|`MI_CH9`    |         |Set channel to 9                 |
+|`MI_CH10`   |         |Set channel to 10                |
+|`MI_CH11`   |         |Set channel to 11                |
+|`MI_CH12`   |         |Set channel to 12                |
+|`MI_CH13`   |         |Set channel to 13                |
+|`MI_CH14`   |         |Set channel to 14                |
+|`MI_CH15`   |         |Set channel to 15                |
+|`MI_CH16`   |         |Set channel to 16                |
+|`MI_CHD`    |         |Decrease channel                 |
+|`MI_CHU`    |         |Increase channel                 |
+|`MI_ALLOFF` |         |Stop all notes                   |
+|`MI_SUS`    |         |Sustain                          |
+|`MI_PORT`   |         |Portmento                        |
+|`MI_SOST`   |         |Sostenuto                        |
+|`MI_SOFT`   |         |Soft Pedal                       |
+|`MI_LEG`    |         |Legato                           |
+|`MI_MOD`    |         |Modulation                       |
+|`MI_MODSD`  |         |Decrease modulation speed        |
+|`MI_MODSU`  |         |Increase modulation speed        |
+|`MI_BENDD`  |         |Bend pitch down                  |
+|`MI_BENDU`  |         |Bend pitch up                    |
+
+### Configuration
+
+Certain values are stored in the `midi_config` struct. This configuration is not persisted to EEPROM. By default, these values are:
+
+|Configuration      |Value|Comments                 |
+|-------------------|-----|-------------------------|
+|Octave             |`4`  |Corresponds to `MI_OCT_2`|
+|Transposition      |`0`  |                         |
+|Velocity           |`127`|                         |
+|Channel            |`0`  |                         |
+|Modulation Interval|`8`  |                         |
+
+For the above, the `MI_C` keycode will produce a C3 (note number 48), and so on.
+
+### References
+#### MIDI Specification
+
+ * [MIDI.org](https://www.midi.org/specifications-old/item/table-1-summary-of-midi-message)
+ * [CMU MIDI Programmer's Reference](https://www.cs.cmu.edu/~music/cmsip/readings/MIDI%20tutorial%20for%20programmers.html)
+#### QMK C Files
+
+ * `quantum/process_keycode/process_midi.c`
+ * `quantum/quantum_keycodes.h`
+ * `tmk_core/protocol/midi.h`
+ * `tmk_core/protocol/midi.c`
+ * `tmk_core/protocol/qmk_midi.c`
+ * `tmk_core/protocol/midi_device.h`
+
+<!--
+#### QMK Internals (Autogenerated)
+ 
+ * [Internals/MIDI Device Setup Process](internals_midi_device_setup_process.md)
+ * [Internals/MIDI Device](internals_midi_device.md)
+ * [Internals/MIDI Util](internals_midi_util.md)
+-->
--- a/docs/ja/custom_quantum_functions.md
+++ b/docs/ja/custom_quantum_functions.md
@@ -1,8 +1,8 @@
 # キーボードの挙動をカスタマイズする方法

 <!---
-  original document: 0.10.52:docs/custom_quantum_functions.md
-  git diff 0.10.52 HEAD -- docs/custom_quantum_functions.md | cat
+  original document: 0.12.41:docs/custom_quantum_functions.md
+  git diff 0.12.41 HEAD -- docs/custom_quantum_functions.md | cat
 -->

 多くの人にとって、カスタムキーボードはボタンの押下をコンピュータに送信するだけではありません。単純なボタンの押下やマクロよりも複雑なことを実行できるようにしたいでしょう。QMK にはコードを挿入したり、機能を上書きしたり、様々な状況でキーボードの挙動をカスタマイズできるフックがあります。
@@ -190,6 +190,14 @@ void keyboard_post_init_user(void) {

 カスタムマトリックススキャンコードが必要な場合は、この関数を使う必要があります。また、カスタムステータス出力 (LED あるいはディスプレイなど)や、ユーザが入力していない場合でも定期的にトリガーするその他の機能のために使うことができます。

+# キーボードハウスキーピング :id=keyboard-housekeeping
+
+* キーボード/リビジョン: `void housekeeping_task_kb(void)`
+* キーマップ: `void housekeeping_task_user(void)`
+
+この関数は、全ての QMK 処理の最後に、次の繰り返しを開始する前に呼び出されます。`housekeeping_task_*` の関数が呼び出された時点で、QMK が最後のマトリックススキャンを処理したと、安全に見なすことができます -- レイヤーの状態が更新され、USB レポートが送信され、LED が更新され、表示が描画されています。
+
+`matrix_scan_*` と同様に、これらは MCU が処理できる頻度で呼び出されます。キーボードの応答性を維持するために、これらの関数の呼び出し中にできるだけ何もしないことをお勧めします。実際に何か特別なものを実装する必要がある場合に動作を停止させる可能性があります。

 # キーボードアイドリング/ウェイクコード

--- a/docs/ja/feature_layers.md
+++ b/docs/ja/feature_layers.md
@@ -1,8 +1,8 @@
 # レイヤー :id=layers

 <!---
-  original document: 0.9.43:docs/feature_layers.md
-  git diff 0.9.43 HEAD -- docs/feature_layers.md | cat
+  original document: 0.12.41:docs/feature_layers.md
+  git diff 0.12.41 HEAD -- docs/feature_layers.md | cat
 -->

 QMK ファームウェアの最も強力で良く使われている機能の一つは、レイヤーを使う機能です。ほとんどの人にとって、これはラップトップやタブレットキーボードにあるのと同じように、様々なキーを可能にするファンクションキーに相当します。
@@ -24,12 +24,10 @@ QMK ファームウェアの最も強力で良く使われている機能の一

 ### 注意事項 :id=caveats

-現在のところ、`LT()` と `MT()` は[基本的なキーコードセット](ja/keycodes_basic.md)に制限されています。つまり、`LCTL()`、`KC_TILD` あるいは `0xFF` より大きなキーコードを使うことができません。特に、`LT` と `MT` のような二重の機能キーは16ビットキーコードを使います。4ビットは機能の識別のために使われ、次の12ビットはパラメータに分かれます。レイヤータップはレイヤーに4ビットを使います(実はレイヤータップがレイヤー 0-15 に制限されている理由です)。モッドタップも同じですが、識別子に4ビット、モッドのために4ビットが使われ、全体でキーコードに8ビットを使います。このため、使用されるキーコードは `0xFF` (0-255) に制限され、基本的なキーコードのみです。
+現在のところ、`LT()` の `layer` 引数はレイヤー 0-15 に制限され、`kc` 引数は[基本的なキーコードセット](ja/keycodes_basic.md)に制限されています。つまり、`LCTL()`、`KC_TILD` あるいは `0xFF` より大きなキーコードを使うことができません。これは、QMK が16ビットのキーコードを使うためです。4ビットは機能の識別のために使われ、4ビットはレイヤーのために使われ、キーコードには8ビットしか残されていません。

 これを拡張してもせいぜい複雑になるだけでしょう。32ビットキーコードに移行すると、これの多くが解決されますが、キーマップマトリックスが使用する領域が2倍になります。また、問題が起きる可能性もあります。タップしたキーコードにモディファイアを適用する必要がある場合は、[タップダンス](ja/feature_tap_dance.md#example-5-using-tap-dance-for-advanced-mod-tap-and-layer-tap-keys)を使うことができます。

-さらに、モッドタップあるいはレイヤータップで少なくとも1つの右手用のモディファイアが指定された場合、指定された全てのモディファイアが右手用になるため、2つをうまく組み合わせて一致させることはできません。
-
 ## レイヤーとの連携 :id=working-with-layers

 レイヤーを切り替える時は注意してください。(キーボードを取り外さずに)そのレイヤーを非アクティブにすることができずレイヤーから移動できなくなる可能性があります。最も一般的な問題を避けるためのガイドラインを作成しました。
--- a/docs/ja/feature_rawhid.md
+++ b/docs/ja/feature_rawhid.md
@@ -1,8 +1,8 @@
 # Raw HID

 <!---
-  original document: 0.10.47:docs/feature_rawhid.md
-  git diff 0.10.47 HEAD -- docs/feature_rawhid.md | cat
+  original document: 0.12.41:docs/feature_rawhid.md
+  git diff 0.12.41 HEAD -- docs/feature_rawhid.md | cat
 -->

 Raw HID は、HID インタフェースを介して QMK とホストコンピュータ間の双方向通信を可能にします。これには、キーマップをその場で切り替えたり、RGB LED の色とモードを変更したりなど、多くの潜在的な使用方法があります。
@@ -34,7 +34,7 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
 }
 ```

-`raw_hid_receive` はホストから最大長 `RAW_EPSIZE` の可変サイズのパケットを受信することができます。一方、`raw_hid_send` はパケットを厳密に `RAW_EPSIZE` の長さで送信するため、長さ `RAW_EPSIZE` のデータを使う必要があります。
+これら2つの関数は、ホストとの間で長さ `RAW_EPSIZE` バイトのパケットを送受信します (LUFA/ChibiOS/V-USB では 32、ATSAM では 64)。

 ホスト側での作業を進める前に、raw 対応のファームウェアを書き込むようにしてください。

--- a/docs/ja/hardware_avr.md
+++ b/docs/ja/hardware_avr.md
@@ -2,8 +2,8 @@

 <!---
  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.10.33:docs/hardware_avr.md
-  git diff 0.10.33 HEAD -- docs/hardware_avr.md | cat
+  original document: 0.12.41:docs/hardware_avr.md
+  git diff 0.12.41 HEAD -- docs/hardware_avr.md | cat
 -->

 このページでは QMK における AVR マイコンのサポートについて説明します。AVR マイコンには、Atmel 社製の atmega32u4、atmega32u2、at90usb1286 やその他のマイコンを含みます。AVR マイコンは、簡単に動かせるよう設計された8ビットの MCU です。キーボードでよく使用される AVR マイコンには USB 機能や大きなキーボードマトリックスのためのたくさんの GPIO を搭載しています。これらは、現在、キーボードで使われる最も一般的な MCU です。
@@ -83,7 +83,7 @@ or open the directory in your favourite text editor.
 #define PRODUCT         my_awesome_keyboard
 ```

-?> Windows や macOS では、`MANUFACTURER` と `PRODUCT` が USBデバイスのリストに表示されます。Linux 上の `lsusb` では、代わりにデフォルトで [USB ID Repository](http://www.linux-usb.org/usb-ids.html) によって維持されているリストからこれらを取得します。`lsusb -v` を使用するとデバイスから示された値を表示します。また、接続したときのカーネルログにも表示されます。
+?> Windows や macOS では、`MANUFACTURER` と `PRODUCT` が USBデバイスのリストに表示されます。Linux 上の `lsusb` では、代わりに [USB ID Repository](http://www.linux-usb.org/usb-ids.html) によって維持されているリストの値を優先します。デフォルトでは、リストに `VENDOR_ID` / `PRODUCT_ID` を含まない場合にのみ、`MANUFACTURER` と `PRODUCT` を使います。`sudo lsusb -v` を使用するとデバイスから示された値を表示します。また、接続したときのカーネルログにも表示されます。

 ### キーボードマトリックスの設定

--- a/docs/ja/mod_tap.md
+++ b/docs/ja/mod_tap.md
@@ -1,8 +1,8 @@
 # モッドタップ

 <!---
-  original document: 0.9.34:docs/mod_tap.md
-  git diff 0.9.34 HEAD -- docs/mod_tap.md | cat
+  original document: 0.10.36:docs/mod_tap.md
+  git diff 0.10.36 HEAD -- docs/mod_tap.md | cat
 -->

 モッドタップキー `MT(mod, kc)` は、押したままの時にモディファイアのように機能し、タップされた時に通常のキーのように振舞います。別の言い方をすると、タップした時に Escape を送信しますが、押したままの時に Control あるいは Shift キーとして機能するキーを持つことができます。
@@ -32,23 +32,26 @@ MT(MOD_LCTL | MOD_LSFT, KC_ESC)

 便利なように、QMK はキーマップで一般的な組み合わせをよりコンパクトにするためのモッドタップショートカットを含んでいます:

-| キー         | エイリアス                  | 説明                                                        |
-|--------------|-----------------------------|-------------------------------------------------------------|
-| `LCTL_T(kc)` | `CTL_T(kc)`                 | 押したままの場合は左 Control、タップした場合は `kc`         |
-| `LSFT_T(kc)` | `SFT_T(kc)`                 | 押したままの場合は左 Shift、タップした場合は `kc`           |
-| `LALT_T(kc)` | `LOPT_T(kc)`, `ALT_T(kc)`, `OPT_T(kc)`                            | 押したままの場合は左 Alt、タップした場合は `kc` |
-| `LGUI_T(kc)` | `LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)` | 押したままの場合は左 GUI、タップした場合は `kc` |
-| `RCTL_T(kc)` |                             | 押したままの場合は右 Control、タップした場合は `kc`         |
-| `RSFT_T(kc)` |                             | 押したままの場合は右 Shift、タップした場合は `kc`           |
-| `RALT_T(kc)` | `ROPT_T(kc)`, `ALGR_T(kc)`  | 押したままの場合は右 Alt、タップした場合は `kc`             |
-| `RGUI_T(kc)` | `RCMD_T(kc)`, `RWIN_T(kc)`  | 押したままの場合は右 GUI、タップした場合は `kc`             |
-| `SGUI_T(kc)` | `SCMD_T(kc)`, `SWIN_T(kc)`  | 押したままの場合は左 Shift と左 GUI、タップした場合は `kc`             |
-| `LCA_T(kc)`  |                             | 押したままの場合は左 Control と左 Alt、タップした場合は `kc`           |
-| `LCAG_T(kc)` |                             | 押したままの場合は左 Control、左 Alt と左 GUI、タップした場合は `kc`   |
-| `RCAG_T(kc)` |                             | 押したままの場合は右 Control、右 Alt と右 GUI、タップした場合は `kc`   |
-| `C_S_T(kc)`  |                             | 押したままの場合は左 Control と左 Shift、タップした場合は `kc`         |
-| `MEH_T(kc)`  |                             | 押したままの場合は左 Control、左 Shift と左 Alt、タップした場合は `kc` |
-| `HYPR_T(kc)` | `ALL_T(kc)`  | 押したままの場合は左 Control、左 Shift、左 Alt と左 GUI、タップした場合は `kc` - より詳しくは[ここ](https://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)を見てください |
+| キー         | エイリアス                                                        | 説明                                                                   |
+| ------------ | ----------------------------------------------------------------- | ---------------------------------------------------------------------- |
+| `LCTL_T(kc)` | `CTL_T(kc)`                                                       | 押したままの場合は左 Control、タップした場合は `kc`                    |
+| `LSFT_T(kc)` | `SFT_T(kc)`                                                       | 押したままの場合は左 Shift、タップした場合は `kc`                      |
+| `LALT_T(kc)` | `LOPT_T(kc)`, `ALT_T(kc)`, `OPT_T(kc)`                            | 押したままの場合は左 Alt、タップした場合は `kc`                        |
+| `LGUI_T(kc)` | `LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)` | 押したままの場合は左 GUI、タップした場合は `kc`                        |
+| `RCTL_T(kc)` |                                                                   | 押したままの場合は右 Control、タップした場合は `kc`                    |
+| `RSFT_T(kc)` |                                                                   | 押したままの場合は右 Shift、タップした場合は `kc`                      |
+| `RALT_T(kc)` | `ROPT_T(kc)`, `ALGR_T(kc)`                                        | 押したままの場合は右 Alt、タップした場合は `kc`                        |
+| `RGUI_T(kc)` | `RCMD_T(kc)`, `RWIN_T(kc)`                                        | 押したままの場合は右 GUI、タップした場合は `kc`                        |
+| `SGUI_T(kc)` | `SCMD_T(kc)`, `SWIN_T(kc)`                                        | 押したままの場合は左 Shift と左 GUI、タップした場合は `kc`             |
+| `LCA_T(kc)`  |                                                                   | 押したままの場合は左 Control と左 Alt、タップした場合は `kc`           |
+| `LSA_T(kc)`  |                                                                   | 押したままの場合は左 Shift と Alt、タップした場合は `kc`               |
+| `RSA_T(kc)`  | `SAGR_T(kc)`                                                      | 押したままの場合は右 Shift と Alt (AltGr)、タップした場合は `kc`       |
+| `RCS_T(kc)`  |                                                                   | 押したままの場合は右 Control と Shift、タップした場合は `kc`           |
+| `LCAG_T(kc)` |                                                                   | 押したままの場合は左 Control、左 Alt と左 GUI、タップした場合は `kc`   |
+| `RCAG_T(kc)` |                                                                   | 押したままの場合は右 Control、右 Alt と右 GUI、タップした場合は `kc`   |
+| `C_S_T(kc)`  |                                                                   | 押したままの場合は左 Control と左 Shift、タップした場合は `kc`         |
+| `MEH_T(kc)`  |                                                                   | 押したままの場合は左 Control、左 Shift と左 Alt、タップした場合は `kc` |
+| `HYPR_T(kc)` | `ALL_T(kc)`                                                       | 押したままの場合は左 Control、左 Shift、左 Alt と左 GUI、タップした場合は `kc` - より詳しくは[ここ](https://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)を見てください |

 ## 注意事項

@@ -57,3 +60,7 @@ MT(MOD_LCTL | MOD_LSFT, KC_ESC)
 さらに、Windows でリモートデスクトップ接続を使う場合に、問題が発生する場合があります。これらのコードはシフトを非常に高速に送信するため、リモートデスクトップはコードを見逃すかもしれません。

 これを修正するには、リモートデスクトップ接続を開き、「オプションの表示」を開き、「ローカル リソース」タブを開きます。キーボードセクションで、ドロップダウンを「このコンピューター」に変更します。これにより問題が修正され、キャラクタが正しく動作するようになります。
+
+## 他のリソース
+
+モッドタップの動作を調整する追加フラグについては、[タップホールド設定オプション](ja/tap_hold.md)を参照してください。
--- a/docs/ja/newbs_building_firmware_configurator.md
+++ b/docs/ja/newbs_building_firmware_configurator.md
@@ -2,13 +2,13 @@

 <!---
  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.9.0:docs/newbs_building_firmware_configurator.md
-  git diff 0.9.0 HEAD -- docs/newbs_building_firmware_configurator.md | cat
+  original document: 0.12.45:docs/newbs_building_firmware_configurator.md
+  git diff 0.12.45 HEAD -- docs/newbs_building_firmware_configurator.md | cat
 -->

 [![QMK Configurator Screenshot](https://i.imgur.com/anw9cOL.png)](https://config.qmk.fm/)

-[QMK Configurator](https://config.qmk.fm) は、QMKファームウェアの hex ファイルを生成するオンライングラフィカルユーザーインターフェイスです。
+[QMK Configurator](https://config.qmk.fm) は、QMKファームウェアの `.hex` や `.bin` ファイルを生成するオンライングラフィカルユーザーインターフェイスです。

 [ビデオチュートリアル](https://www.youtube.com/watch?v=-imgglzDMdY) を見てください。
 多くの人は、それが自分のキーボードのプログラミングを始めるのに十分な情報であることに気づくでしょう。
--- a/docs/ja/one_shot_keys.md
+++ b/docs/ja/one_shot_keys.md
@@ -1,8 +1,8 @@
 # ワンショットキー

 <!---
-  original document: 0.9.34:docs/one_shot_keys.md
-  git diff 0.9.34 HEAD -- docs/one_shot_keys.md | cat
+  original document: 0.12.41:docs/one_shot_keys.md
+  git diff 0.12.41 HEAD -- docs/one_shot_keys.md | cat
 -->

 ワンショットキーは次のキーが押されるまでアクティブのままになり、そのあと放されるキーです。これにより一度に1つ以上のキーを押すことなく、キーボードの組み合わせを入力することができます。これらのキーは通常「スティッキーキー」あるいは「デッドキー」と呼ばれます。
@@ -27,7 +27,7 @@

 ワンショットレイヤーについては、キーを押した時に `set_oneshot_layer(LAYER, ONESHOT_START)` を呼び出し、キーを放した時に `clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED)` を呼び出す必要があります。ワンショットをキャンセルする場合は、`reset_oneshot_layer()` を呼び出してください。

-ワンショットモッドについては、設定するためには `set_oneshot_mods(MOD)` を呼び出し、キャンセルするためには `clear_oneshot_mods()` を呼び出す必要があります。
+ワンショットモッドについては、設定するためには `set_oneshot_mods(MOD_BIT(KC_*))` を呼び出し、キャンセルするためには `clear_oneshot_mods()` を呼び出す必要があります。

 !> リモートデスクトップ接続で OSM 変換に問題がある場合は、設定を開いて「ローカル リソース」タブに移動し、キーボードセクションでドロップダウンを「このコンピューター」に変更することで修正することができます。これにより問題が修正され、OSM がリモートデスクトップ上で適切に動作するようになります。

--- a/docs/ja/ref_functions.md
+++ b/docs/ja/ref_functions.md
@@ -1,8 +1,8 @@
 # キーボードをより良くするための便利なコア関数のリスト

 <!---
-  original document: 0.10.33:docs/ref_functions.md
-  git diff 0.10.33 HEAD -- docs/ref_functions.md | cat
+  original document: 0.12.41:docs/ref_functions.md
+  git diff 0.12.41 HEAD -- docs/ref_functions.md | cat
 -->

 QMK には、信じられないほど便利な、またはあなたが望んでいた機能を少し追加する、隠された関数がたくさんあります。特定の機能に固有の関数はそれぞれの機能のページにあるため、ここには含まれていません。
@@ -98,7 +98,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {

 ## EEPROM (永続ストレージ)の消去

-オーディオ、RGB アンダーグロー、バックライト、キーの動作に問題がある場合は、EEPROM (永続的な設定のストレージ)をリセットすることができます。ブートマジックはこれを行う方法の1つですが、有効になっていない場合はカスタムマクロを使って行うことができます。
+オーディオ、RGB アンダーグロー、バックライト、キーの動作に問題がある場合は、EEPROM (永続的な設定のストレージ)をリセットすることができます。EEPROM を強制的にリセットするには、[`EEP_RST` キーコード](ja/quantum_keycodes.md)あるいは[ブートマジック](ja/feature_bootmagic.md)機能を使います。それらのいずれも選択肢にない場合は、カスタムマクロを使って行うことができます。

 EEPROM を消去するには、関数またはマクロから `eeconfig_init()` を実行し、ほとんどの設定をデフォルトにリセットします。

--- a/docs/ws2812_driver.md
+++ b/docs/ws2812_driver.md
@@ -72,7 +72,9 @@ WS2812_DRIVER = spi
 Configure the hardware via your config.h:
 ```c
 #define WS2812_SPI SPID1 // default: SPID1
-#define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
+#define WS2812_SPI_MOSI_PAL_MODE 5 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
+#define WS2812_SPI_SCK_PIN B3 // Required for F072, may be for others -- SCK pin, see the respective datasheet for the appropriate values for your MCU. default: unspecified
+#define WS2812_SPI_SCK_PAL_MODE 5 // SCK pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
 ```

 You must also turn on the SPI feature in your halconf.h and mcuconf.h
@@ -100,11 +102,11 @@ Only divisors of 2, 4, 8, 16, 32, 64, 128 and 256 are supported by hardware.

 While not an exhaustive list, the following table provides the scenarios that have been partially validated:

-| | SPI1 | SPI2 | SPI3 |
-|-|-|-|-|
-| f072 | ? | B15 :heavy_check_mark: | N/A |
-| f103 | A7 :heavy_check_mark: | B15 :heavy_check_mark: | N/A |
-| f303 | A7 :heavy_check_mark: B5 :heavy_check_mark:  | B15 :heavy_check_mark: | B5 :heavy_check_mark: |
+|      | SPI1                                        | SPI2                                    | SPI3                  |
+|------|---------------------------------------------|-----------------------------------------|-----------------------|
+| f072 | ?                                           | B15 :heavy_check_mark: (needs SCK: B13) | N/A                   |
+| f103 | A7 :heavy_check_mark:                       | B15 :heavy_check_mark:                  | N/A                   |
+| f303 | A7 :heavy_check_mark: B5 :heavy_check_mark: | B15 :heavy_check_mark:                  | B5 :heavy_check_mark: |

 *Other supported ChibiOS boards and/or pins may function, it will be highly chip and configuration dependent.*

--- a/drivers/avr/spi_master.c
+++ b/drivers/avr/spi_master.c
@@ -14,10 +14,8 @@
 *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
 */

-#include <avr/io.h>
-
 #include "spi_master.h"
-#include "quantum.h"
+
 #include "timer.h"

 #if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
--- a/drivers/avr/spi_master.h
+++ b/drivers/avr/spi_master.h
@@ -16,7 +16,9 @@

 #pragma once

-#include "quantum.h"
+#include <stdbool.h>
+
+#include "gpio.h"

 typedef int16_t spi_status_t;

--- a/drivers/chibios/spi_master.c
+++ b/drivers/chibios/spi_master.c
@@ -15,7 +15,7 @@
 */

 #include "spi_master.h"
-#include "quantum.h"
+
 #include "timer.h"

 static pin_t     currentSlavePin = NO_PIN;
--- a/drivers/chibios/spi_master.h
+++ b/drivers/chibios/spi_master.h
@@ -18,7 +18,9 @@

 #include <ch.h>
 #include <hal.h>
-#include "quantum.h"
+#include <stdbool.h>
+
+#include "gpio.h"

 #ifndef SPI_DRIVER
 #    define SPI_DRIVER SPID2
--- a/drivers/chibios/ws2812_spi.c
+++ b/drivers/chibios/ws2812_spi.c
@@ -16,19 +16,23 @@
 #    define WS2812_SPI_MOSI_PAL_MODE 5
 #endif

+#ifndef WS2812_SPI_SCK_PAL_MODE
+#    define WS2812_SPI_SCK_PAL_MODE 5
+#endif
+
 // Push Pull or Open Drain Configuration
 // Default Push Pull
 #ifndef WS2812_EXTERNAL_PULLUP
 #    if defined(USE_GPIOV1)
-#        define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
 #    else
-#        define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
 #    endif
 #else
 #    if defined(USE_GPIOV1)
-#        define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
 #    else
-#        define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN
 #    endif
 #endif

@@ -63,6 +67,12 @@
 #    define WS2812_SPI_BUFFER_MODE 0  // normal buffer
 #endif

+#if defined(USE_GPIOV1)
+#    define WS2812_SCK_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#else
+#    define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
+#endif
+
 #define BYTES_FOR_LED_BYTE 4
 #define NB_COLORS 3
 #define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS)
@@ -109,7 +119,11 @@ static void set_led_color_rgb(LED_TYPE color, int pos) {
 }

 void ws2812_init(void) {
-    palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
+    palSetLineMode(RGB_DI_PIN, WS2812_MOSI_OUTPUT_MODE);
+
+#ifdef WS2812_SPI_SCK_PIN
+    palSetLineMode(WS2812_SPI_SCK_PIN, WS2812_SCK_OUTPUT_MODE);
+#endif  // WS2812_SPI_SCK_PIN

    // TODO: more dynamic baudrate
    static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR};
--- a/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk
+++ b/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk
@@ -2,6 +2,9 @@
 MCU = STM32F303
 BOARD = QMK_PROTON_C

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 ## Features
 CONSOLE_ENABLE = yes
 ENCODER_ENABLE = yes
--- a/keyboards/acheron/arctic/rules.mk
+++ b/keyboards/acheron/arctic/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/acheron/austin/rules.mk
+++ b/keyboards/acheron/austin/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/acheron/keebspcb/rules.mk
+++ b/keyboards/acheron/keebspcb/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/acheron/lasgweloth/rules.mk
+++ b/keyboards/acheron/lasgweloth/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/acheron/shark/rules.mk
+++ b/keyboards/acheron/shark/rules.mk
@@ -2,6 +2,9 @@
 MCU = STM32F303
 BOARD = QMK_PROTON_C

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/aeboards/ext65/rev2/config.h
+++ b/keyboards/aeboards/ext65/rev2/config.h
@@ -51,6 +51,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //SPI
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13
 #define WS2812_EXTERNAL_PULLUP

 // I2C OLED defines
--- a/keyboards/aeboards/ext65/rev2/rules.mk
+++ b/keyboards/aeboards/ext65/rev2/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   comment out to disable the options.
 #
--- a/keyboards/ai03/andromeda/rules.mk
+++ b/keyboards/ai03/andromeda/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/ai03/vega/rules.mk
+++ b/keyboards/ai03/vega/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/akegata_denki/device_one/rules.mk
+++ b/keyboards/akegata_denki/device_one/rules.mk
@@ -1,8 +1,10 @@
 # MCU name
 MCU = STM32F042
-
 BOARD = ST_NUCLEO32_F042K6

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   comment out to disable the options.
 #
--- a/keyboards/alpine65/rules.mk
+++ b/keyboards/alpine65/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/at_at/660m/rules.mk
+++ b/keyboards/at_at/660m/rules.mk
@@ -2,6 +2,9 @@
 MCU = STM32F072
 BOARD = GENERIC_STM32_F072XB

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   comment out to disable the options.
 #
--- a/keyboards/atreus/keymaps/ridingqwerty/rules.mk
+++ b/keyboards/atreus/keymaps/ridingqwerty/rules.mk
@@ -1,6 +1,10 @@
+# MCU name
 MCU = STM32F303
 BOARD = QMK_PROTON_C

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -16,4 +20,3 @@ RGBLIGHT_ENABLE = no
 TAP_DANCE_ENABLE = no
 UNICODE_ENABLE = no
 UNICODEMAP_ENABLE = yes
-
--- a/keyboards/bop/bop.c
+++ b/keyboards/bop/bop.c
@@ -0,0 +1,17 @@
+/* Copyright 2021 Brandon Lewis
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#include "bop.h"
--- a/keyboards/bop/bop.h
+++ b/keyboards/bop/bop.h
@@ -0,0 +1,35 @@
+/* Copyright 2021 Brandon Lewis
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, \
+	K500, K501, K502, K503, K504, K505, K506, K507, K508, K509, K510, K511, K512, K513, K514, K515, K516, K517, K518, K519  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018,  K019 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115,  K116,  K117,  K118,  K119 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215,  K216,  K217,  K218,  K219 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315,  K316,  K317,  K318,  K319 }, \
+	{ K400,  K401,  K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  K413,  K414,  K415,  K416,  K417,  K418,  K419 }, \
+	{ K500,  K501,  K502,  K503,  K504,  K505,  K506,  K507,  K508,  K509,  K510,  K511,  K512,  K513,  K514,  K515,  K516,  K517,  K518,  K519 }  \
+}
--- a/keyboards/bop/config.h
+++ b/keyboards/bop/config.h
@@ -0,0 +1,49 @@
+/* Copyright 2021 Brandon Lewis
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x666B // fk
+#define PRODUCT_ID      0x626F // bo
+#define DEVICE_VER      0x0001 // rev 1
+#define MANUFACTURER    fruitykeeb
+#define PRODUCT         bop
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 20
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B7, D0, D1, D2, D3, D4 }
+#define MATRIX_COL_PINS { D5, C5, B0, B1, B2, B3, B4, B5, B6, E7, E6, F0, F7, F6, F5, F4, F3, F2, F1, C6 }
+//    If your board is spamming the end column, change C7 to C6 in the line above and short those pins on the controller
+                        
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
--- a/keyboards/bop/info.json
+++ b/keyboards/bop/info.json
@@ -0,0 +1,138 @@
+{
+    "keyboard_name":  "bop",
+    "url": "https://github.com/blewis308/BOP-Keyboard",
+    "maintainer": "Fruit",
+    "width":  20.0,
+    "height": 6.0,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+                {"x":15, "y":0},
+                {"x":16, "y":0},
+                {"x":17, "y":0},
+                {"x":18, "y":0},
+                {"x":19, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+                {"x":4, "y":1},
+                {"x":5, "y":1},
+                {"x":6, "y":1},
+                {"x":7, "y":1},
+                {"x":8, "y":1},
+                {"x":9, "y":1},
+                {"x":10, "y":1},
+                {"x":11, "y":1},
+                {"x":12, "y":1},
+                {"x":13, "y":1},
+                {"x":14, "y":1},
+                {"x":15, "y":1},
+                {"x":16, "y":1},
+                {"x":17, "y":1},
+                {"x":18, "y":1},
+                {"x":19, "y":1},
+                
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+                {"x":4, "y":2},
+                {"x":5, "y":2},
+                {"x":6, "y":2},
+                {"x":7, "y":2},
+                {"x":8, "y":2},
+                {"x":9, "y":2},
+                {"x":10, "y":2},
+                {"x":11, "y":2},
+                {"x":12, "y":2},
+                {"x":13, "y":2},
+                {"x":14, "y":2},
+                {"x":15, "y":2},
+                {"x":16, "y":2},
+                {"x":17, "y":2},
+                {"x":18, "y":2},
+                {"x":19, "y":2},
+                
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+                {"x":4, "y":3},
+                {"x":5, "y":3},
+                {"x":6, "y":3},
+                {"x":7, "y":3},
+                {"x":8, "y":3},
+                {"x":9, "y":3},
+                {"x":10, "y":3},
+                {"x":11, "y":3},
+                {"x":12, "y":3},
+                {"x":13, "y":3},
+                {"x":14, "y":3},
+                {"x":15, "y":3},
+                {"x":16, "y":3},
+                {"x":17, "y":3},
+                {"x":18, "y":3},
+                {"x":19, "y":3},
+                
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":3, "y":4},
+                {"x":4, "y":4},
+                {"x":5, "y":4},
+                {"x":6, "y":4},
+                {"x":7, "y":4},
+                {"x":8, "y":4},
+                {"x":9, "y":4},
+                {"x":10, "y":4},
+                {"x":11, "y":4},
+                {"x":12, "y":4},
+                {"x":13, "y":4},
+                {"x":14, "y":4},
+                {"x":15, "y":4},
+                {"x":16, "y":4},
+                {"x":17, "y":4},
+                {"x":18, "y":4},
+                {"x":19, "y":4},
+                
+                {"x":0, "y":5},
+                {"x":1, "y":5},
+                {"x":2, "y":5},
+                {"x":3, "y":5},
+                {"x":4, "y":5},
+                {"x":5, "y":5},
+                {"x":6, "y":5},
+                {"x":7, "y":5},
+                {"x":8, "y":5},
+                {"x":9, "y":5},
+                {"x":10, "y":5},
+                {"x":11, "y":5},
+                {"x":12, "y":5},
+                {"x":13, "y":5},
+                {"x":14, "y":5},
+                {"x":15, "y":5},
+                {"x":16, "y":5},
+                {"x":17, "y":5},
+                {"x":18, "y":5},
+                {"x":19, "y":5}
+            ]
+        }
+    }
+}
--- a/keyboards/bop/keymaps/default/keymap.c
+++ b/keyboards/bop/keymaps/default/keymap.c
@@ -0,0 +1,46 @@
+/* Copyright 2021 Brandon Lewis
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT(
+	/*			For build guide: go to https://github.com/blewis308/BOP-Keyboard
+	*	,-----------------------------------------------------------------------------------------------------------------------.
+	*	| F1  | F5  | F9  |  ~  |  !  |  @  |  #  |  $  |  %  |  ^  |  &  |  *  |  (  |  )  |  _  |  +  | del |  {  |  }  |  |  |
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+	*	| F2  | F6  | F10 | esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |bkspc| home| end |pg up|
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+	*	| F3  | F7  | F11 | tab |  q  |  w  |  e  |  r  |  t  |  y  |  u  |  i  |  o  |  p  |  [  |  ]  |  \  |  :  |  "  |pg dn|
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+	*	| F4  | F8  | F12 |caplk|  a  |  s  |  d  |  f  |  g  |  h  |  j  |  k  |  l  |  ;  |  '  |enter|     |  7  |  8  |  9  |
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|  0  |-----+-----+-----|
+	*	|ptscr|scrlk|psbrk|shift|  z  |  x  |  c  |  v  |  b  |  n  |  m  |  <  |  >  |  ?  |shift| up  |     |  4  |  5  |  6  |
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+	*	| cut | copy|paste|Lctrl|L gui|L alt|   space   | n/a |   space   |  ,  |  .  |  /  | left| down|right|  1  |  2  |  3  |
+	*	`-----------------------------------------------------------------------------------------------------------------------'
+	*
+	*	Notes: spaces and numpad 0 can be 1u instead of 2u also, this is already reflected in the keymap below
+	*/
+	
+		KC_F1, 		KC_F5, 		KC_F9, 	    KC_TILD, KC_EXLM,   KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN,  KC_RPRN, 	KC_UNDS, KC_PLUS, KC_DEL, KC_LCBR, KC_RCBR, KC_PIPE, 
+		KC_F2, 		KC_F6, 		KC_F10, 	KC_ESC,  KC_1, 		KC_2, 	KC_3, 	KC_4, 	KC_5, 	KC_6, 		KC_7, 	KC_8, 	KC_9, 		KC_0, 	KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_END, KC_PGUP, 
+		KC_F3, 		KC_F7, 		KC_F11, 	KC_TAB,  KC_Q, 		KC_W, 	KC_E, 	KC_R, 	KC_T, 	KC_Y, 		KC_U, 	KC_I, 	KC_O, 		KC_P, 	KC_LBRC, KC_RBRC, KC_BSLS, KC_COLN, KC_DQUO, KC_PGDN, 
+		KC_F4,      KC_F8, 		KC_F12, 	KC_CAPS, KC_A, 		KC_S, 	KC_D, 	KC_F, 	KC_G, 	KC_H, 		KC_J, 	KC_K, 	KC_L, 		KC_SCLN, KC_QUOT, KC_ENT, KC_KP_0,	KC_KP_7, KC_KP_8, KC_KP_9, 
+		KC_PSCR,    KC_SLCK, 	KC_PAUS, 	KC_LSFT, KC_Z, 		KC_X, 	KC_C, 	KC_V, 	KC_B, 	KC_N, 		KC_M, 	KC_LABK, KC_RABK, 	KC_QUES, KC_RSFT, KC_UP,  KC_KP_0, 	KC_KP_4, KC_KP_5, KC_KP_6, 
+		LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), KC_LCTL, KC_LGUI,	KC_LALT, KC_SPC, KC_SPC, KC_NO, KC_SPC,   KC_SPC, 	KC_COMM, KC_DOT,   KC_SLSH,  KC_LEFT, KC_DOWN, KC_RGHT, KC_KP_1, KC_KP_2, KC_KP_3 )
+};
--- a/keyboards/bop/readme.md
+++ b/keyboards/bop/readme.md
@@ -0,0 +1,16 @@
+# bop
+
+![Bop](https://i.imgur.com/mEWmMgvh.jpg)
+![Bop-top](https://i.imgur.com/DbjVdvVh.jpg)
+
+A huge 6x20 ortholinear keyboard inspired by the BFO-9000
+
+* Keyboard Maintainer: [Fruit](https://github.com/Blewis308)
+* Hardware Supported: Bop v1.1 PCB, Teensy 2.0++
+* Hardware Availablility: Through Group Buy - Jan 2021
+
+Make example for this keyboard (after setting up your build envionment):
+
+    make bop:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/bop/rules.mk
+++ b/keyboards/bop/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = at90usb1286
+
+# Bootloader selection
+BOOTLOADER = halfkay
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+SWAP_HANDS_ENABLE = no
--- a/keyboards/boston/rules.mk
+++ b/keyboards/boston/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/boston_meetup/2019/rules.mk
+++ b/keyboards/boston_meetup/2019/rules.mk
@@ -2,6 +2,9 @@
 MCU = STM32F303
 BOARD = QMK_PROTON_C

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   comment out to disable the options.
 #
--- a/keyboards/box75/rules.mk
+++ b/keyboards/box75/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/c39/keymaps/drashna/rules.mk
+++ b/keyboards/c39/keymaps/drashna/rules.mk
@@ -1,6 +1,9 @@
+# MCU name
 MCU = STM32F303
 BOARD = QMK_PROTON_C
-BOOTLOADER =
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu

 BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
--- a/keyboards/caffeinated/serpent65/rules.mk
+++ b/keyboards/caffeinated/serpent65/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/cannonkeys/an_c/config.h
+++ b/keyboards/cannonkeys/an_c/config.h
@@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 14
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/an_c/rules.mk
+++ b/keyboards/cannonkeys/an_c/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -20,8 +26,5 @@ WS2812_DRIVER = spi

 LAYOUTS = 60_ansi 60_tsangan_hhkb

-# Wildcard to allow APM32 MCU 
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/cannonkeys/atlas/config.h
+++ b/keyboards/cannonkeys/atlas/config.h
@@ -50,6 +50,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN B15
 #define RGBLED_NUM 22
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/atlas/rules.mk
+++ b/keyboards/cannonkeys/atlas/rules.mk
@@ -1,6 +1,9 @@
 # MCU Name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   comment out to disable the options.
 BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
--- a/keyboards/cannonkeys/chimera65/rules.mk
+++ b/keyboards/cannonkeys/chimera65/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   comment out to disable the options.
 #
--- a/keyboards/cannonkeys/db60/config.h
+++ b/keyboards/cannonkeys/db60/config.h
@@ -55,6 +55,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN B15
 #define RGBLED_NUM 20
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/db60/rules.mk
+++ b/keyboards/cannonkeys/db60/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -15,9 +21,6 @@ BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = spi

-# Wildcard to allow APM32 MCU
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 DEFAULT_FOLDER = cannonkeys/db60/rev2

 # Enter lower-power sleep mode when on the ChibiOS idle thread
--- a/keyboards/cannonkeys/devastatingtkl/config.h
+++ b/keyboards/cannonkeys/devastatingtkl/config.h
@@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/devastatingtkl/rules.mk
+++ b/keyboards/cannonkeys/devastatingtkl/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -16,8 +22,5 @@ BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = spi

-# Wildcard to allow APM32 MCU 
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/cannonkeys/instant60/config.h
+++ b/keyboards/cannonkeys/instant60/config.h
@@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 14
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/instant60/rules.mk
+++ b/keyboards/cannonkeys/instant60/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -19,8 +25,5 @@ WS2812_DRIVER = spi

 LAYOUTS = 60_ansi 60_tsangan_hhkb

-# Wildcard to allow APM32 MCU 
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/cannonkeys/instant65/config.h
+++ b/keyboards/cannonkeys/instant65/config.h
@@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13


 /*
--- a/keyboards/cannonkeys/instant65/rules.mk
+++ b/keyboards/cannonkeys/instant65/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   change yes to no to disable
 #
@@ -21,6 +27,3 @@ WS2812_DRIVER = spi

 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
-
-# Wildcard to allow APM32 MCU 
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
--- a/keyboards/cannonkeys/iron165/rules.mk
+++ b/keyboards/cannonkeys/iron165/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   comment out to disable the options.
 #
--- a/keyboards/cannonkeys/obliterated75/config.h
+++ b/keyboards/cannonkeys/obliterated75/config.h
@@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13


 /*
--- a/keyboards/cannonkeys/obliterated75/rules.mk
+++ b/keyboards/cannonkeys/obliterated75/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   change yes to no to disable
 #
@@ -18,8 +24,5 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 WS2812_DRIVER = spi

-# Wildcard to allow APM32 MCU
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/cannonkeys/onyx/rules.mk
+++ b/keyboards/cannonkeys/onyx/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   change yes to no to disable
 #
@@ -18,8 +24,5 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output

-# Wildcard to allow APM32 MCU
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/cannonkeys/rekt1800/rules.mk
+++ b/keyboards/cannonkeys/rekt1800/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -15,8 +21,5 @@ CUSTOM_MATRIX = no          # Custom matrix file
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = no

-# Wildcard to allow APM32 MCU 
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/cannonkeys/sagittarius/config.h
+++ b/keyboards/cannonkeys/sagittarius/config.h
@@ -60,6 +60,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 8
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 #define DYNAMIC_KEYMAP_LAYER_COUNT 2

--- a/keyboards/cannonkeys/sagittarius/rules.mk
+++ b/keyboards/cannonkeys/sagittarius/rules.mk
@@ -1,8 +1,11 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Wildcard to allow APM32 MCU
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF

 # Build Options
 #   change yes to no to disable
--- a/keyboards/cannonkeys/satisfaction75/bootloader_defs.h
+++ b/keyboards/cannonkeys/satisfaction75/bootloader_defs.h
@@ -1,5 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- a/keyboards/cannonkeys/satisfaction75/rules.mk
+++ b/keyboards/cannonkeys/satisfaction75/rules.mk
@@ -2,6 +2,12 @@
 MCU = STM32F072
 BOARD = GENERIC_STM32_F072XB

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -25,8 +31,5 @@ QWIIC_DRIVERS += MICRO_OLED

 DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1

-# Wildcard to allow APM32 MCU
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/cannonkeys/savage65/config.h
+++ b/keyboards/cannonkeys/savage65/config.h
@@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13


 /*
--- a/keyboards/cannonkeys/savage65/rules.mk
+++ b/keyboards/cannonkeys/savage65/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -21,7 +27,4 @@ WS2812_DRIVER = spi
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

-# Wildcard to allow APM32 MCU 
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_ansi_blocker_tsangan 65_iso_blocker
--- a/keyboards/cannonkeys/tmov2/config.h
+++ b/keyboards/cannonkeys/tmov2/config.h
@@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 22
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/tmov2/rules.mk
+++ b/keyboards/cannonkeys/tmov2/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -20,6 +26,3 @@ WS2812_DRIVER = spi

 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
-
-# Wildcard to allow APM32 MCU 
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
--- a/keyboards/cannonkeys/tsukuyomi/config.h
+++ b/keyboards/cannonkeys/tsukuyomi/config.h
@@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13


 /*
--- a/keyboards/cannonkeys/tsukuyomi/rules.mk
+++ b/keyboards/cannonkeys/tsukuyomi/rules.mk
@@ -1,6 +1,12 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -v FFFF -p FFFF
+
 # Build Options
 #   change yes to no to disable
 #
@@ -19,8 +25,5 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 WS2812_DRIVER = spi

-# Wildcard to allow APM32 MCU 
-DFU_SUFFIX_ARGS = -p FFFF -v FFFF
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/capsunlocked/cu80/v2_ansi/rgb/rules.mk
+++ b/keyboards/capsunlocked/cu80/v2_ansi/rgb/rules.mk
@@ -1,2 +1,4 @@
 RGB_MATRIX_ENABLE = yes     # Enable RGB matrix
 RGB_MATRIX_DRIVER = WS2812  # Set Driver to WS2812
+
+LTO_ENABLE = yes
--- a/keyboards/capsunlocked/cu80/v2_iso/rgb/rules.mk
+++ b/keyboards/capsunlocked/cu80/v2_iso/rgb/rules.mk
@@ -1,2 +1,4 @@
 RGB_MATRIX_ENABLE = yes     # Enable RGB matrix
 RGB_MATRIX_DRIVER = WS2812  # Set Driver to WS2812
+
+LTO_ENABLE = yes
--- a/keyboards/carbo65/rules.mk
+++ b/keyboards/carbo65/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Do not put the microcontroller into power saving mode
 # when we get USB suspend event. We want it to keep updating
 # backlight effects.
--- a/keyboards/charue/sunsetter/rules.mk
+++ b/keyboards/charue/sunsetter/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/chavdai40/rev1/rules.mk
+++ b/keyboards/chavdai40/rev1/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F042

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
@@ -15,4 +18,4 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
-AUDIO_ENABLE = no           # Audio output
+AUDIO_ENABLE = no           # Audio output
--- a/keyboards/chavdai40/rev2/rules.mk
+++ b/keyboards/chavdai40/rev2/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F042

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
@@ -15,4 +18,4 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
-AUDIO_ENABLE = no           # Audio output
+AUDIO_ENABLE = no           # Audio output
--- a/keyboards/cheshire/curiosity/rules.mk
+++ b/keyboards/cheshire/curiosity/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/ck60i/rules.mk
+++ b/keyboards/ck60i/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/ckeys/thedora/rules.mk
+++ b/keyboards/ckeys/thedora/rules.mk
@@ -2,6 +2,9 @@
 MCU = STM32F303
 BOARD = QMK_PROTON_C

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   comment out to disable the options.
 #
--- a/keyboards/clueboard/60/config.h
+++ b/keyboards/clueboard/60/config.h
@@ -19,12 +19,6 @@

 #include "config_common.h"

-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
-
 /* Backlight configuration
 */
 #define BACKLIGHT_LEVELS 1
--- a/keyboards/clueboard/66/rev4/config.h
+++ b/keyboards/clueboard/66/rev4/config.h
@@ -2,12 +2,6 @@

 #include "config_common.h"

-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
-
 /* Backlight configuration
 */
 #define BACKLIGHT_LEVELS 1
--- a/keyboards/clueboard/66_hotswap/gen1/config.h
+++ b/keyboards/clueboard/66_hotswap/gen1/config.h
@@ -18,12 +18,6 @@
 #pragma once
 #include "config_common.h"

-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 // #define DEBOUNCE 6

--- a/keyboards/coarse/cordillera/rules.mk
+++ b/keyboards/coarse/cordillera/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/config.h
+++ b/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/config.h
@@ -0,0 +1,20 @@
+/* Copyright 2021 James Young (@noroadsleft)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define ANSI_NUBS_ROW 3
+#define ANSI_NUBS_COL 2
--- a/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/keymap.c
+++ b/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/keymap.c
@@ -54,10 +54,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    ),

    [_FN] = LAYOUT_65_ansi(
-        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_PSCR,
-        _______, KC_CALC, KC_APP,  _______, _______, _______, KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, _______,
-        _______, M_SALL,  _______, _______, _______, _______, KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,          _______, _______,
-        _______,          M_UNDO,  M_CUT,   M_COPY,  M_PASTE, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, TO(_SY), _______, _______, _______,
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  DM_REC1,
+        _______, KC_CALC, KC_APP,  _______, _______, _______, KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, DM_REC2,
+        _______, M_SALL,  _______, _______, _______, _______, KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,          DM_RSTP, DM_PLY1,
+        _______,          M_UNDO,  M_CUT,   M_COPY,  M_PASTE, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, TO(_SY), _______, _______, DM_PLY2,
        _______, _______, _______,                            TG(_NP),                   _______, _______, _______, _______, _______, _______
    ),

--- a/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/rules.mk
+++ b/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/rules.mk
@@ -0,0 +1 @@
+DYNAMIC_MACRO_ENABLE = yes
--- a/keyboards/coseyfannitutti/mysterium/keymaps/ansi_7u/keymap.c
+++ b/keyboards/coseyfannitutti/mysterium/keymaps/ansi_7u/keymap.c
@@ -17,7 +17,7 @@

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [0] = LAYOUT_tkl_ansi_7u(
-      KC_GESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
+      KC_ESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_INS,   KC_HOME, KC_PGUP,
      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,   KC_END,  KC_PGDN,
      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,
--- a/keyboards/coseyfannitutti/mysterium/keymaps/default/keymap.c
+++ b/keyboards/coseyfannitutti/mysterium/keymaps/default/keymap.c
@@ -17,7 +17,7 @@

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [0] = LAYOUT_tkl_ansi(
-      KC_GESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
+      KC_ESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_INS,   KC_HOME, KC_PGUP,
      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,   KC_END,  KC_PGDN,
      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,
--- a/keyboards/coseyfannitutti/mysterium/keymaps/iso/keymap.c
+++ b/keyboards/coseyfannitutti/mysterium/keymaps/iso/keymap.c
@@ -17,7 +17,7 @@

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [0] = LAYOUT_tkl_iso(
-      KC_GESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
+      KC_ESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_INS,   KC_HOME, KC_PGUP,
      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_DEL,   KC_END,  KC_PGDN,
      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NUHS, KC_ENT,
--- a/keyboards/coseyfannitutti/mysterium/keymaps/via/keymap.c
+++ b/keyboards/coseyfannitutti/mysterium/keymaps/via/keymap.c
@@ -17,7 +17,7 @@

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [0] = LAYOUT_tkl_iso(
-      KC_GESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
+      KC_ESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_INS,   KC_HOME, KC_PGUP,
      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_DEL,   KC_END,  KC_PGDN,
      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT, KC_BSLS,
--- a/keyboards/coseyfannitutti/mysterium/mysterium.h
+++ b/keyboards/coseyfannitutti/mysterium/mysterium.h
@@ -58,16 +58,16 @@
    K00,      K02, K03, K04, K05, K06, K07, K08, K09,      K0B, K0C, K0D, K0E, K0F, K0G, K0H, \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, K1G, K1H, \
    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           K2F, K2G, K2H, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K2D,                     \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K2D, K3D,                     \
    K40, K01, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A,      K4D,           K4G,      \
    K50, K51, K52,                K56,           K59, K5A,      K5C,      K5E, K5F, K5G, K5H  \
 ) \
 { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, _x_, K0B, K0C, K0D, K0E, K0F, K0G, K0H }, \
+    { K00, _x_, K02, K03, K04, K05, K06, K07, K08, K09, _x_, K0B, K0C, K0D, K0E, K0F, K0G, K0H }, \
    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, _x_, K1F, K1G, K1H }, \
    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, _x_, K2F, K2G, K2H }, \
    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, _x_, _x_, _x_, _x_ }, \
-    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, _x_, _x_, K4D, _x_, _x_, K4G, _x_ }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K01, _x_, K4D, _x_, _x_, K4G, _x_ }, \
    { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, K59, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H }  \
 }

@@ -80,10 +80,10 @@
    K50, K51, K52,                K56,                K5A,      K5C,      K5E, K5F, K5G, K5H  \
 ) \
 { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, _x_, K0B, K0C, K0D, K0E, K0F, K0G, K0H }, \
+    { K00, _x_, K02, K03, K04, K05, K06, K07, K08, K09, _x_, K0B, K0C, K0D, K0E, K0F, K0G, K0H }, \
    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, _x_, K1F, K1G, K1H }, \
    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, _x_, K2F, K2G, K2H }, \
    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, _x_, _x_, _x_, _x_ }, \
-    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, _x_, _x_, K4D, _x_, _x_, K4G, _x_ }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K01, _x_, K4D, _x_, _x_, K4G, _x_ }, \
    { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, _x_, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H }  \
 }
--- a/keyboards/cutie_club/borsdorf/rules.mk
+++ b/keyboards/cutie_club/borsdorf/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/cutie_club/giant_macro_pad/rules.mk
+++ b/keyboards/cutie_club/giant_macro_pad/rules.mk
@@ -1,6 +1,9 @@
 # MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #   change yes to no to disable
 #
--- a/keyboards/daji/seis_cinco/rules.mk
+++ b/keyboards/daji/seis_cinco/rules.mk
@@ -2,6 +2,9 @@
 MCU = STM32F072
 BOARD = GENERIC_STM32_F072XB

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 # comment out to disable the options.
 #
--- a/keyboards/dekunukem/duckypad/rules.mk
+++ b/keyboards/dekunukem/duckypad/rules.mk
@@ -1,6 +1,9 @@
-# MCU Name
+# MCU name
 MCU = STM32F072

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
 #  change yes to no to disable
 #
--- a/keyboards/durgod/k320/rules.mk
+++ b/keyboards/durgod/k320/rules.mk
@@ -1,9 +1,11 @@
 # MCU name
 # Actually F070, but close enough
 MCU = STM32F072
-
 BOARD = DURGOD_STM32_F070

+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Do not put the microcontroller into power saving mode
 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN

--- a/keyboards/dz60/keymaps/jdelkins/config.h
+++ b/keyboards/dz60/keymaps/jdelkins/config.h
@@ -0,0 +1,51 @@
+/*
+  Copyright 2020 Joel Elkins <joel@elkins.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Directional arrangement | LAYOUT_directional
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │  0e   │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┬───┤
+ * │30     │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │
+ * ├────┬──┴─┬─┴──┬┴───┴───┴───┴───┴───┴───┼───┼───┼───┼───┼───┤
+ * │40  │41  │43  │           46           │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘
+*/
+
+#define LAYOUT_directional_nosplitspace( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,      k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+    k40, k41,      k43,           k46,                k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,  k0c,  KC_NO,k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,  k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,  k2c,  k2d,  KC_NO }, \
+    { k30,  KC_NO, k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,  k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  KC_NO,KC_NO, k46,  KC_NO, KC_NO,KC_NO, k4a,  k4b,  k4c,  k4d,  k4e   }  \
+}
+
+#define AUTO_SHIFT_TIMEOUT 160
+#define RGBLIGHT_LAYERS
+#define LEADER_TIMEOUT 400
+#define LEADER_PER_KEY_TIMING
--- a/keyboards/dz60/keymaps/jdelkins/keymap.c
+++ b/keyboards/dz60/keymaps/jdelkins/keymap.c
@@ -0,0 +1,279 @@
+/*
+  Copyright 2020 Joel Elkins <joel@elkins.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "jdelkins.h"
+
+#undef LAYOUT
+#define LAYOUT LAYOUT_directional_nosplitspace
+
+#define IDLE_TIMEOUT 360
+uint16_t rgb_idle_seconds = 0;
+uint16_t rgb_timer;
+bool rgb_was_enabled;
+
+// Tap Dance
+
+int ctl_state = 0;
+
+void ctl_finished(qk_tap_dance_state_t *state, void *user_data) {
+    ctl_state = cur_dance(state);
+    switch(ctl_state) {
+        case SINGLE_TAP:    qk_leader_start(); break;
+        case SINGLE_HOLD:   register_code(KC_LCTL); break;
+        case DOUBLE_TAP:    tap_code(KC_RCTL); break;
+        case DOUBLE_HOLD:   register_code(KC_RCTL); break;
+        case TRIPLE_TAP:    tap_code(KC_RCTL); tap_code(KC_RCTL); break;
+        case TRIPLE_HOLD:   tap_code(KC_RCTL); register_code(KC_RCTL); break;
+    }
+}
+
+void ctl_reset(qk_tap_dance_state_t *state, void *user_data) {
+    switch(ctl_state) {
+        case SINGLE_HOLD:   unregister_code(KC_LCTL); break;
+        case DOUBLE_HOLD:
+        case TRIPLE_HOLD:   unregister_code(KC_RCTL); break;
+    }
+    ctl_state = 0;
+}
+
+void g_finished(qk_tap_dance_state_t *state, void *user_data) {
+    switch (cur_dance(state)) {
+        case SINGLE_TAP:
+            tap_code16(C(KC_END));
+            break;
+        case DOUBLE_TAP:
+            tap_code16(C(KC_HOME));
+            break;
+    }
+}
+
+enum {
+    TD_LDCTL,
+    TD_G,
+};
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+    [TD_LDCTL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ctl_finished, ctl_reset),
+    [TD_G]     = ACTION_TAP_DANCE_FN_ADVANCED(NULL, g_finished, NULL),
+};
+
+// Layers
+
+const uint16_t PROGMEM keymaps[_LAYER_MAX][MATRIX_ROWS][MATRIX_COLS] = {
+    [_QWERTY] = LAYOUT(
+            KC_GESC,      KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,    KC_0,        KC_MINS, KC_EQL,  KC_BSPC,
+            KC_TAB,       KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,        KC_LBRC, KC_RBRC, KC_BSLS,
+            MY_CAPS,      KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN,     KC_QUOT,          KC_ENT,
+            KC_LSFT,      KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH,     KC_RSFT, KC_BSPC, MO(_ADJUST),
+            TD(TD_LDCTL), MY_GUI, MY_ALT,                 MY_SPC,                KC_RALT, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    ),
+    [_GAME] = LAYOUT(
+            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+            KC_LCTL, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+            _______, _______, KC_LALT,                       KC_SPC,                         _______, _______, _______, _______, _______
+    ),
+    [_FUNC] = LAYOUT(
+            KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,  KC_DEL,
+            _______, _______, FW_WRD,  KB_EOL,  _______, _______,  KB_COPY, KC_PGUP, _______, _______, KB_PASTE, KC_SLCK, _______, MY_CALC,
+            _______, KB_BOL,  _______, KC_PGDN, _______, TD(TD_G), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______,  _______,          _______,
+            _______, _______, KC_DEL,  _______, _______, BK_WRD,   _______, _______, _______, _______, _______,  _______, KC_INS,  _______,
+            _______, MY_RGUI, MY_RALT,                        _______,                        _______, KC_HOME,  KC_PGDN, KC_PGUP, KC_END
+    ),
+    [_KP] = LAYOUT(
+            _______,    _______, _______, _______, _______, _______, _______, _______, KC_KP_ASTERISK, _______,   _______,     _______, _______, _______,
+            KC_NUMLOCK, _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, _______, KC_KP_7, KC_KP_8,        KC_KP_9,   KC_KP_MINUS, _______, _______, _______,
+            _______,    _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, KC_KP_4, KC_KP_5,        KC_KP_6,   KC_KP_PLUS,  _______,          _______,
+            _______,    _______, _______, _______, _______, _______, _______, KC_KP_1, KC_KP_2,        KC_KP_3,   KC_KP_SLASH, _______, _______, TG(_KP),
+            _______,    _______, _______,                       KC_KP_0,                               KC_KP_DOT, _______,     _______, _______, _______
+    ),
+    [_ADJUST] = LAYOUT(
+            KC_GRV,  KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+            _______, RGB_SPD,  RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, _______, _______, _______, KC_PSCR, KC_SLCK, _______, KC_MUTE,
+            _______, RGB_RMOD, RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, TG(_KP), _______, _______, _______,          KC_MPLY,
+            _______, RGB_TOG,  KB_MAKE, KB_FLSH, KB_VRSN, KB_BOOT, _______, TG_SYS,  _______, _______, _______, _______, KC_DEL,  _______,
+            _______, MY_RGUI,  MY_RALT,                      _______,                         _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
+    ),
+};
+
+const rgblight_segment_t PROGMEM game_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_RED},
+    {7, 2, HSV_RED},
+    {15, 1, HSV_RED}
+);
+
+const rgblight_segment_t PROGMEM func_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 8, HSV_GREEN}
+);
+
+const rgblight_segment_t PROGMEM kp_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 16, HSV_ORANGE}
+);
+
+const rgblight_segment_t PROGMEM adjust_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 16, HSV_BLUE}
+);
+
+const rgblight_segment_t PROGMEM capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {10, 4, HSV_WHITE}
+);
+
+const rgblight_segment_t PROGMEM numlock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 2, HSV_PURPLE},
+    {14, 2, HSV_PURPLE}
+);
+
+
+enum rgb_layer_index {
+    L_GAME,
+    L_FUNC,
+    L_KP,
+    L_ADJUST,
+    L_CAPSLOCK,
+    L_NUMLOCK,
+};
+
+const rgblight_segment_t * const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(
+        [L_GAME] = game_layer,
+        [L_FUNC] = func_layer,
+        [L_KP] = kp_layer,
+        [L_ADJUST] = adjust_layer,
+        [L_CAPSLOCK] = capslock_layer,
+        [L_NUMLOCK] = numlock_layer
+);
+
+layer_state_t layer_state_set_keymap(layer_state_t state) {
+    rgblight_set_layer_state(L_GAME, layer_state_cmp(state, _GAME));
+    rgblight_set_layer_state(L_FUNC, layer_state_cmp(state, _FUNC));
+    rgblight_set_layer_state(L_KP, layer_state_cmp(state, _KP));
+    rgblight_set_layer_state(L_ADJUST, layer_state_cmp(state, _ADJUST));
+    rgblight_set_layer_state(L_CAPSLOCK, CAPSLOCK_ON);
+    rgblight_set_layer_state(L_NUMLOCK, NUMLOCK_ON && layer_state_cmp(state, _KP));
+    if (layer_state_cmp(state, _GAME))
+        autoshift_disable();
+    else
+        autoshift_enable();
+    return state;
+}
+
+bool led_update_user(led_t led_state) {
+    rgblight_set_layer_state(L_CAPSLOCK, led_state.caps_lock);
+    rgblight_set_layer_state(L_NUMLOCK, led_state.num_lock && layer_state_is(_KP));
+    return true;
+}
+
+void keyboard_post_init_keymap(void) {
+    rgblight_layers = my_rgb_layers;
+    rgb_was_enabled = rgblight_is_enabled();
+}
+
+LEADER_EXTERNS();
+
+void matrix_scan_keymap(void) {
+    if (rgblight_is_enabled() && timer_elapsed(rgb_timer) > 1000) {
+        rgb_idle_seconds++;
+        rgb_timer = timer_read();
+    }
+    if (rgb_idle_seconds > IDLE_TIMEOUT) {
+        rgb_was_enabled = rgblight_is_enabled();
+        rgblight_disable_noeeprom();
+        rgb_idle_seconds = 0;
+    }
+    LEADER_DICTIONARY() {
+        leading = false;
+        leader_end();
+
+        SEQ_ONE_KEY(KC_K) {
+            layer_invert(_KP);
+        }
+        SEQ_ONE_KEY(KC_G) {
+            layer_invert(_GAME);
+        }
+        SEQ_ONE_KEY(KC_KP_5) {
+            layer_invert(_KP);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_1) {
+            send_secret_string(0);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_2) {
+            send_secret_string(1);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_3) {
+            send_secret_string(2);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_4) {
+            send_secret_string(3);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_5) {
+            send_secret_string(4);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_6) {
+            send_secret_string(5);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_M) {
+            send_secret_string(0);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_COMM) {
+            send_secret_string(1);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_DOT) {
+            send_secret_string(2);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_J) {
+            send_secret_string(3);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_K) {
+            send_secret_string(4);
+        }
+        SEQ_TWO_KEYS(KC_SCLN, KC_L) {
+            send_secret_string(5);
+        }
+        SEQ_ONE_KEY(KC_C) {
+            tap_code16(C(KC_C));
+        }
+    }
+}
+
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+    static uint16_t gesc_timer;
+
+    rgb_idle_seconds = 0;
+    if (!rgblight_is_enabled() && rgb_was_enabled)
+        rgblight_enable_noeeprom();
+
+    switch (keycode) {
+        // custom handle KC_GESC to emulate auto shift on it
+        case KC_GESC:
+            if (get_autoshift_state()) {
+                if (record->event.pressed)
+                    gesc_timer = timer_read();
+                else {
+                    if (timer_elapsed(gesc_timer) > AUTO_SHIFT_TIMEOUT || MODS_SHIFT) {
+                        tap_code16(S(KC_GRV));
+                    } else if (MODS_GUI)
+                        tap_code(KC_GRV);
+                    else
+                        tap_code(KC_ESC);
+                }
+                return false;
+            }
+            return false;
+    }
+
+    return true;
+}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Nick Brassel	d684b8cafe	Slightly more prominent LUFA Mass-storage bootloader warning. (#13163 )	2021-06-10 16:05:29 +10:00
jackytrabbit	39c8ed32b4	Add support for LAZYDESIGNERS/THE60/rev2 (#13015 ) Co-authored-by: Erovia <Erovia@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>	2021-06-09 19:47:37 +02:00
Xelus22	5073dc33e9	update via keymap (#13145 )	2021-06-09 19:14:44 +10:00
Nick Brassel	21aa7890cb	Allow limiting the multibuild based on keymap name. (#13066 )	2021-06-09 17:25:21 +10:00
Joel Challis	4dda716712	Migrate preonic/rev3 to pwm ws2812 driver (#13142 )	2021-06-09 00:18:56 -07:00
Drashna Jaelre	9975e17712	Fix Bug with (RGB\|LED)_DISABLE_WHEN_USB_SUSPENDED define (#13060 )	2021-06-09 05:06:55 +10:00
Ryan	9dcd03b6ca	Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956 ) * Set bootloader to stm32-dfu for STM32F303 * Set bootloader to stm32-dfu for STM32F0x2 * Set bootloader to stm32-dfu for STM32F4x1 * Set bootloader to stm32duino for sowbug * Delete redundant bootloader_defs headers * Add some missing MCU name comments * Move APM32 dfu-suffix overrides underneath bootloader * Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules	2021-06-08 19:48:46 +10:00
Joel Challis	e0acd3e53d	Update requirements.txt (#13135 )	2021-06-08 00:37:58 +01:00
Zach White	c277ae4768	Move hid and pyusb to requirements.txt (#13134 ) * Add his and pyusb to * Update requirements-dev.txt	2021-06-07 16:30:55 -07:00
shela	b52b8f1d23	Update Japanese newbs_building_firmware_configurator.md document. (#12836 )	2021-06-08 02:43:21 +09:00
umi	b7ef959400	update ref_functions.md translation (#12784 )	2021-06-08 02:41:33 +09:00
umi	17e6e04600	update one_shot_keys.md translation (#12771 )	2021-06-08 02:39:57 +09:00
umi	a0ed583b75	update hardware_avr.md translation (#12760 )	2021-06-08 02:38:38 +09:00
umi	093a89c534	update feature_rawhid.md translation (#12759 )	2021-06-08 02:36:42 +09:00
umi	c1bd8eed76	[Docs] update Japanese translation of custom_quantum_functions.md (#12715 ) * update custom_quantum_functions.md translation * update custom_quantum_functions.md translation * explicitly describe pronoun * update based on comment * update based on comment	2021-06-08 02:34:39 +09:00
Ryan	9dffd35762	Add default `ortho_1x1` layout (#13118 )	2021-06-07 20:46:22 +10:00
wxyangf	b10728edc1	[Docs] added basic midi documention of common features (#13113 ) Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com>	2021-06-06 23:53:20 -07:00
Matthew Dias	94e80912a4	[Keyboard] Add program yoink via keymap (#12645 ) Co-authored-by: Ryan <fauxpark@gmail.com>	2021-06-06 22:10:37 -07:00
bbrfkr	7b666245d6	[Keyboard] add molecule (#12601 ) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>	2021-06-06 22:08:20 -07:00
HalfHeuslerAlloy	23631de191	Fixed ISO keyboard layout for the Mysterium rev1.1 board (#12531 )	2021-06-06 21:54:54 -07:00
Miguel Filipe	0374e4c733	[Keymap] add id80/ansi/keymaps/msf (#11957 )	2021-06-06 20:37:59 -07:00
Nathan_Blais	add10524d6	Corrected Number-pad numbers (#13057 )	2021-06-07 06:13:33 +10:00
TerryMathews	7aab06ffdf	JETVAN: Add initial support (#12790 ) Co-authored-by: Ryan <fauxpark@gmail.com>	2021-06-06 08:26:36 +10:00
shela	ab6128e86d	Update Japanese document (#10670 ) Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>	2021-06-06 03:36:48 +09:00
umi	8128c5f822	update feature_layers.md translation (#12752 )	2021-06-06 03:16:39 +09:00
Drashna Jaelre	770a3349be	Fix includes for pmw3360 driver (#13108 )	2021-06-05 08:08:35 -07:00
James Young	c7c9f3e3cf	kbdfans/kbd67/rev2: add LAYOUT_65_ansi_split_space layout data (#13102 )	2021-06-03 20:02:35 -07:00
stanrc85	e660dcff09	Fix caps lock indicator on Bear65 PCB (#12966 )	2021-06-03 17:30:32 -07:00
Jonathan Rascher	6eb18a6ccb	[Keymap] Update bcat's split_3x6_3 for Crkbd legacy removal (#13097 )	2021-06-03 11:39:48 -07:00
Ryan	af91221ddb	`qmk multibuild`: Fix bug with Path objects (#13093 )	2021-06-03 16:53:03 +01:00
Ryan	261d94ce34	Tidy up spi_master includes (#13053 )	2021-06-03 16:26:41 +10:00
James Young	a0cc2dc6d0	Update noroadsleft userspace and keymaps (2021-06-02) (#13086 )	2021-06-02 23:06:30 -07:00
Nick Brassel	597d2e0e7b	Fix up WS2812 SPI driver on F072. (#13022 )	2021-06-03 09:48:16 +10:00
Joel Elkins	35dbe8ba03	[Keymap] merge jdelkins userspace and associated keymaps (#11276 ) * [Keymap] merge jdelkins userspace and associated keymaps * Add copyright & license info * Change rgblight_config.enable to rgblight_is_enabled() * Update keyboards/dz60/keymaps/jdelkins/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/dz60/keymaps/jdelkins/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/dz60/keymaps/jdelkins/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Remove superfluous includes * Change EXTRAFLAGS+=-flto to LTO_ENABLE=yes * Remove unnecessary jdelkins_ss symlink in users * Add copyright and license notices * Use preferred way to determine capslock / numlock state Co-authored-by: Drashna Jaelre <drashna@live.com> * Add #pragma once to a header Co-authored-by: Drashna Jaelre <drashna@live.com> * Include QMK_KEYBOARD_H only once, in userspace header * Remove unnecessary initialization in matrix_init_keymap * Do process_record_keymap before cases handled in process_record_user * Reorganize & simplify secrets feature enablement * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Remove superfluous break Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * include "print.h" instead of <print.h> Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_cod16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * add #pragma once to a header Co-authored-by: Ryan <fauxpark@gmail.com> * include "print.h" instead of <print.h> Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use :flash target where possible * Remove special case flash target and use PROGRAM_CMD * dz60/jdelkins_ss: use tap_code16 Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>	2021-06-03 06:59:52 +10:00
Xelus22	93496c8364	fix missing arg (#13068 )	2021-06-01 18:12:17 +10:00
Xelus22	5a06813b10	VIA compile fixes (#13054 )	2021-05-31 21:56:23 -07:00
Jeff Apczynski	6bafefa886	[Keymap] lja83's Planck keymap (#12809 ) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Jeff Apczynski <jeffrey.apczynski@braincorp.com>	2021-05-30 21:16:26 -07:00
Gregorio	1a3064afb1	[Keyboard] Add Rubi Numpad (#12283 ) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>	2021-05-30 21:04:26 -07:00
Lander	2b8f1fcdfb	[Keyboard] Unicomp Mini M (#12892 )	2021-05-30 14:58:43 -07:00
Brandon Lewis	7b055dcc55	[Keyboard] Added BOP support (#12991 ) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Brandon Lewis <blewis308@users.noreply.github.com>	2021-05-30 14:57:43 -07:00
lukeski14	fc9a2167b1	[Keyboard] jabberwocky via support (#13029 )	2021-05-30 14:55:58 -07:00
Sergey Vlasov	3aca3d3572	merge/um70:via: Avoid sprintf() to make the code fit into flash (#12919 ) The code using sprintf() did not fit into flash when `merge/um70:via` was compiled with avr-gcc 5.4.0: * The firmware is too large! 29756/28672 (1084 bytes over) Replacing `sprintf(wpm_str, " %03d", current_wpm);` with custom formatting code reduces the firmware size by 1504 bytes, which is enough to make the `merge/um70:via` firmware fit: * The firmware size is approaching the maximum - 28252/28672 (98%, 420 bytes free)	2021-05-30 14:47:44 -07:00
Erovia	305cca9a5e	CLI: Fix automagic (#13046 )	2021-05-30 16:17:40 +01:00