Redefinition of MIN is avoided in midi.c (#18203)

Co-authored-by: Ryan <fauxpark@gmail.com>

.vscode/settings.json

@@ -6,7 +6,8 @@
     "files.exclude": {
         "**/.build": true,
         "**/*.hex": true,
-        "**/*.bin": true
+        "**/*.bin": true,
+        "**/*.uf2": true
     },
     "files.associations": {
         "*.h": "c",

data/schemas/api_keyboard.jsonschema

@@ -9,7 +9,6 @@
                     "properties": {
                         "url": {"type": "string"}
                     }
-
                 },
                 "parse_errors": {"$ref": "qmk.definitions.v1#/string_array"},
                 "parse_warnings": {"$ref": "qmk.definitions.v1#/string_array"},

data/schemas/keyboard.jsonschema

@@ -76,7 +76,7 @@
                     "type": "string",
                     "enum": ["BluefruitLE", "RN42"]
                 },
-                "lto": {"type": "boolean"},
+                "lto": {"type": "boolean"}
             }
         },
         "board": {
@@ -86,7 +86,29 @@
         },
         "bootloader": {
             "type": "string",
-            "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "custom", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "md-boot", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "wb32-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2", "rp2040"],
+            "enum": [
+                "atmel-dfu",
+                "bootloadhid",
+                "bootloadHID",
+                "caterina",
+                "custom",
+                "gd32v-dfu",
+                "halfkay",
+                "kiibohd",
+                "lufa-dfu",
+                "lufa-ms",
+                "md-boot",
+                "qmk-dfu",
+                "qmk-hid",
+                "rp2040",
+                "stm32-dfu",
+                "stm32duino",
+                "tinyuf2",
+                "unknown",
+                "usbasploader",
+                "USBasp",
+                "wb32-dfu"
+            ]
         },
         "bootloader_instructions": {
             "type": "string",
@@ -104,7 +126,7 @@
                     "type": "string",
                     "enum": ["bin", "hex", "uf2"]
                 },
-                "lto": {"type": "boolean"},
+                "lto": {"type": "boolean"}
             }
         },
         "diode_direction": {
@@ -119,8 +141,8 @@
                 "enabled": {"type": "boolean"},
                 "both_shifts_turns_on": {"type": "boolean"},
                 "double_tap_shift_turns_on": {"type": "boolean"},
-                "idle_timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"},
-            },
+                "idle_timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"}
+            }
         },
         "combo": {
             "type": "object",
@@ -228,10 +250,10 @@
             "type": "object",
             "properties": {
                 "enabled": {"type": "boolean"},
-                "delay": {"$ref": "qmk.definitions.v1#/unsigned_int_8"}
-                "interval": {"$ref": "qmk.definitions.v1#/unsigned_int_8"}
-                "max_speed": {"$ref": "qmk.definitions.v1#/unsigned_int_8"}
-                "time_to_max": {"$ref": "qmk.definitions.v1#/unsigned_int_8"}
+                "delay": {"$ref": "qmk.definitions.v1#/unsigned_int_8"},
+                "interval": {"$ref": "qmk.definitions.v1#/unsigned_int_8"},
+                "max_speed": {"$ref": "qmk.definitions.v1#/unsigned_int_8"},
+                "time_to_max": {"$ref": "qmk.definitions.v1#/unsigned_int_8"},
                 "wheel_delay": {"$ref": "qmk.definitions.v1#/unsigned_int_8"}
             }
         },
@@ -458,7 +480,7 @@
                 "retro_per_key": {"type": "boolean"},
                 "term": {"$ref": "qmk.definitions.v1#/unsigned_int"},
                 "term_per_key": {"type": "boolean"},
-                "toggle": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "toggle": {"$ref": "qmk.definitions.v1#/unsigned_int"}
             }
         },
         "usb": {
@@ -482,7 +504,7 @@
                     }
                 },
                 "suspend_wakeup_delay": {"$ref": "qmk.definitions.v1#/unsigned_int"},
-                "wait_for": {"type": "boolean"},
+                "wait_for": {"type": "boolean"}
             }
         },
         "qmk": {
@@ -491,7 +513,7 @@
             "properties": {
                 "keys_per_scan": {"$ref": "qmk.definitions.v1#/unsigned_int_8"},
                 "tap_keycode_delay": {"$ref": "qmk.definitions.v1#/unsigned_int"},
-                "tap_capslock_delay": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "tap_capslock_delay": {"$ref": "qmk.definitions.v1#/unsigned_int"}
             }
         },
         "qmk_lufa_bootloader": {

data/schemas/keymap.jsonschema

@@ -31,7 +31,7 @@
                             "properties": {
                                 "action": {
                                     "type": "string",
-                                    "enum": ['beep', 'delay', 'down', 'tap', 'up']
+                                    "enum": ["beep", "delay", "down", "tap", "up"]
                                 },
                                 "keycodes": {
                                     "type": "array",

keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h

@@ -16,6 +16,9 @@
  */
 #pragma once
 
+#undef PRODUCT
+#define PRODUCT "Charybdis (4x6) Blackpill"
+
 #undef MATRIX_COL_PINS
 #define MATRIX_COL_PINS \
     { B0, B1, B12, B3, B4, B5 }
@@ -34,7 +37,7 @@
 #define DIODE_DIRECTION ROW2COL
 #define SPLIT_HAND_PIN A3
 #undef MASTER_RIGHT
-// #define USB_VBUS_PIN B10
+#define USB_VBUS_PIN B10
 
 #undef RGB_DI_PIN
 #define RGB_DI_PIN A1
@@ -55,6 +58,8 @@
 #define AUDIO_PWM_PAL_MODE 2
 #define AUDIO_STATE_TIMER  GPTD3
 #define AUDIO_INIT_DELAY
+#define AUDIO_ENABLE_TONE_MULTIPLEXING
+#define AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT 10
 
 #undef SOFT_SERIAL_PIN
 // #define SERIAL_USART_FULL_DUPLEX  // Enable full duplex operation mode.
@@ -64,12 +69,8 @@
 // #define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 // #define SERIAL_USART_RX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 // #define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100
-// // #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master
-// // To use the highest possible baudrate (3.75Mbit/s) uncomment the following
-// // line, this can result in dropped communications so lower the speed if there
-// // are many timeouts.
-// // #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4)
-#define SERIAL_USART_SPEED       921600
+// #define SERIAL_USART_SPEED       921600
+#define SERIAL_USART_SPEED (1.5 * 1024 * 1024)
 
 #define CRC8_USE_TABLE
 #define CRC8_OPTIMIZE_SPEED
@@ -103,3 +104,12 @@
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
 
 #define CHARYBDIS_CONFIG_SYNC
+
+#define BOOTMAGIC_LITE_ROW    0
+#define BOOTMAGIC_LITE_COLUMN 0
+#define BOOTMAGIC_LITE_ROW_RIGHT    5
+#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
+#define BOOTMAGIC_LITE_EEPROM_ROW    1
+#define BOOTMAGIC_LITE_EEPROM_COLUMN 0
+#define BOOTMAGIC_LITE_EEPROM_ROW_RIGHT    1
+#define BOOTMAGIC_LITE_EEPROM_COLUMN_RIGHT 0

keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c

@@ -26,8 +26,8 @@
      KC_ESC,  ________________NUMBER_LEFT________________,            ________________NUMBER_RIGHT_______________, UC_CLUE, \
      SH_TT,   K01,    K02,      K03,     K04,     K05,                K06,     K07,     K08,     K09,     K0A,     SH_TT, \
      LALT_T(KC_TAB), K11, K12,  K13,     K14,     K15,                K16,     K17,     K18,     K19,     K1A,     RALT_T(K1B), \
-     OS_LSFT,CTL_T(K21),ALT_T(K22),GUI_T(K23),K24,K25,                K26,K27,RGUI_T(K28),RALT_T(K29),RCTL_T(K2A), OS_RSFT, \
-                           SFT_T(KC_GRV), UC_IRNY, OS_LGUI,    TT(_MOUSE),  KC_ENT, \
+     OS_LSFT,CTL_T(K21),  K22,  K23,     K24,     K25,                K26,K27,RGUI_T(K28),RALT_T(K29),RCTL_T(K2A), OS_RSFT, \
+                           SFT_T(KC_GRV), OS_LALT, OS_LGUI,    TT(_MOUSE),  KC_ENT, \
                                            KC_SPC, BK_LWER,     DL_RAIS \
     )
 

keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk

@@ -31,3 +31,4 @@ TAP_DANCE_ENABLE      = yes
 DEBOUNCE_TYPE         = asym_eager_defer_pk
 WPM_ENABLE            = yes
 LTO_ENABLE            = no
+# OPT                   = 3

keyboards/bastardkb/dilemma/keymaps/drashna/config.h

@@ -0,0 +1,8 @@
+// Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define CIRQUE_PINNACLE_TAP_ENABLE
+#define POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE
+#define POINTING_DEVICE_GESTURES_SCROLL_ENABLE

keyboards/bastardkb/dilemma/keymaps/drashna/keymap.c

@@ -0,0 +1,160 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "drashna.h"
+
+// clang-format off
+#define LAYOUT_split_3x5_2_wrapper(...) LAYOUT_split_3x5_2(__VA_ARGS__)
+#define LAYOUT_split_3x5_2_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+    ) \
+    LAYOUT_split_3x5_2 ( \
+       K01,    K02,      K03,     K04,     K05,                K06,     K07,     K08,     K09,     K0A, \
+       ALT_T(K11), K12,  K13,     K14,     GUI_T(K15),  LGUI_T(K16),    K17,     K18,     K19, LALT_T(K1A), \
+       CTL_T(K21), K22,  K23,     K24,     K25,                K26,     K27,     K28,     K29, RCTL_T(K2A), \
+                              KC_SPC,  BK_LWER,              DL_RAIS, RSFT_T(KC_ENT) \
+    )
+
+#define LAYOUT_split_3x5_2_base_wrapper(...)       LAYOUT_split_3x5_2_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_DEFAULT_LAYER_1] = LAYOUT_split_3x5_2_base_wrapper(
+        _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+        _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+        _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+    ),
+
+    [_DEFAULT_LAYER_2] = LAYOUT_split_3x5_2_base_wrapper(
+        ______________COLEMAK_MOD_DH_L1____________, ______________COLEMAK_MOD_DH_R1____________,
+        ______________COLEMAK_MOD_DH_L2____________, ______________COLEMAK_MOD_DH_R2____________,
+        ______________COLEMAK_MOD_DH_L3____________, ______________COLEMAK_MOD_DH_R3____________
+    ),
+    [_DEFAULT_LAYER_3] = LAYOUT_split_3x5_2_base_wrapper(
+        _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+        _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+        _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+    ),
+
+    [_DEFAULT_LAYER_4] = LAYOUT_split_3x5_2_base_wrapper(
+        _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+        _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+        _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+    ),
+
+    [_MOUSE] = LAYOUT_split_3x5_2(
+        _______, _______, _______, _______, _______,    KC_WH_U, DPI_RMOD,DPI_MOD, S_D_RMOD,S_D_MOD,
+        _______, _______, _______, _______, _______,    KC_WH_D, KC_BTN1, KC_BTN3, KC_BTN2, KC_BTN6,
+        _______, _______, _______, _______, _______,    KC_BTN7, KC_BTN4, KC_BTN5, KC_BTN8, _______,
+                                    SNIPING, _______,    _______, _______
+    ),
+    [_LOWER] = LAYOUT_split_3x5_2_wrapper(
+        _________________LOWER_L1__________________,    _________________LOWER_R1__________________,
+        _________________LOWER_L2__________________,    _________________LOWER_R2__________________,
+        _________________LOWER_L3__________________,    _________________LOWER_R3__________________,
+                                   _______, _______,    _______, AUTO_CTN
+    ),
+    [_RAISE] = LAYOUT_split_3x5_2_wrapper(
+        _________________RAISE_L1__________________,    _________________RAISE_R1__________________,
+        _________________RAISE_L2__________________,    _________________RAISE_R2__________________,
+        _________________RAISE_L3__________________,    _________________RAISE_R3__________________,
+                                   _______, _______,    _______, _______
+    ),
+    [_ADJUST] = LAYOUT_split_3x5_2_wrapper(
+        _________________ADJUST_L1_________________,    _________________ADJUST_R1_________________,
+        _________________ADJUST_L2_________________,    _________________ADJUST_R2_________________,
+        _________________ADJUST_L3_________________,    _________________ADJUST_R3_________________,
+                                   KC_NUKE, _______,    _______, QK_BOOT
+    ),
+};
+
+
+void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
+    for (int32_t i = 0; i < 40; i++) {
+        __asm__ volatile("nop" ::: "memory");
+    }
+}
+
+
+#if defined(OLED_ENABLE) && defined(OLED_DISPLAY_128X128)
+#    ifdef UNICODE_COMMON_ENABLE
+#        include "process_unicode_common.h"
+#        include "keyrecords/unicode.h"
+#    endif
+
+extern const char PROGMEM display_border[3];
+
+
+extern uint32_t oled_timer;
+extern bool is_oled_enabled;
+
+
+bool oled_task_keymap(void) {
+    static const char PROGMEM header_image[] = {
+        0, 192, 32, 16, 8, 4, 2, 1, 1, 1, 1, 1, 1, 1, 1, 3, 7, 15, 31, 63, 127, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 127, 63, 31, 15, 7, 3, 1, 1, 1, 1, 1, 1, 1, 1, 2, 4, 8, 16, 32, 192, 0,
+        //         0,255,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  3,  7, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  7,  3,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,255,  0
+    };
+    oled_write_raw_P(header_image, sizeof(header_image));
+    oled_set_cursor(7, 0);
+    oled_write_P(PSTR("Rock On"), true);
+
+    render_default_layer_state(1, 1);
+    render_layer_state(1, 2);
+    render_kitty(0, 5);
+    render_wpm(1, 7, 5);
+#   if defined(POINTING_DEVICE_ENABLE)
+    render_pointing_dpi_status(dilemma_get_pointer_sniping_enabled() ? dilemma_get_pointer_sniping_dpi() : dilemma_get_pointer_default_dpi(), 1, 7, 6);
+    render_mouse_mode(17, 6);
+#    elif defined(WPM_ENABLE) && defined(DEBUG_MATRIX_SCAN_RATE)
+    render_matrix_scan_rate(1, 7, 6);
+#    endif
+    render_bootmagic_status(7, 7);
+    render_user_status(1, 9);
+
+    render_mod_status(get_mods() | get_oneshot_mods(), 1, 10);
+    render_keylock_status(host_keyboard_led_state(), 1, 11);
+    render_unicode_mode(1, 12);
+
+//    render_rgb_hsv(1, 13);
+    oled_set_cursor(1, 13);
+    // oled_write_P(PSTR("Timer:"), false);
+    // oled_write(get_u8_str((uint8_t)(timer_elapsed32(oled_timer) / 1000), ' '), false);
+    oled_write_P(PSTR("Status: "), false);
+    if (is_oled_enabled) {
+        oled_write_P(PSTR("on "), false);
+    } else {
+        oled_write_P(PSTR("off"), false);
+    }
+
+    render_keylogger_status(1, 14);
+
+    for (uint8_t i = 1; i < 15; i++) {
+        oled_set_cursor(0, i);
+        oled_write_raw_P(display_border, sizeof(display_border));
+        oled_set_cursor(21, i);
+        oled_write_raw_P(display_border, sizeof(display_border));
+    }
+
+    static const char PROGMEM footer_image[] = {0, 3, 4, 8, 16, 32, 64, 128, 128, 128, 128, 128, 128, 128, 192, 224, 240, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 240, 224, 192, 128, 128, 128, 128, 128, 128, 128, 64, 32, 16, 8, 4, 3, 0};
+    oled_set_cursor(0, 15);
+    oled_write_raw_P(footer_image, sizeof(footer_image));
+
+    return false;
+}
+#endif

keyboards/bastardkb/dilemma/keymaps/drashna/rules.mk

@@ -0,0 +1,8 @@
+SWAP_HANDS_ENABLE     = no
+AUTOCORRECTION_ENABLE = yes
+CAPS_WORD_ENABLE      = yes
+CONSOLE_ENABLE        = yes
+KEYLOGGER_ENABLE      = no
+WPM_ENABLE            = yes
+OLED_ENABLE           = yes
+OLED_DRIVER           = custom

keyboards/bbrfkr/dynamis/dynamis.c

@@ -18,16 +18,12 @@
 
 #ifdef ENCODER_ENABLE
 bool encoder_update_kb(uint8_t index, bool clockwise) {
-    if (!encoder_update_user(index, clockwise)) {
-        return false; 
+    if (!encoder_update_user(index, clockwise)) { return false; }
+    if (clockwise) {
+        tap_code(layer_state == 0 ? KC_WH_D : KC_VOLD);
+    } else {
+        tap_code(layer_state == 0 ? KC_WH_U : KC_VOLU);
     }
-   if (index == 0) { /* First encoder */
-      if (clockwise) {
-         tap_code(KC_WH_D);
-      } else {
-         tap_code(KC_WH_U);
-      }
-   }
-   return false;
+    return true;
 }
 #endif

keyboards/bbrfkr/dynamis/info.json

@@ -17,62 +17,62 @@
                     "y": 0
                 },
                 {
-                    "label": "F1",
+                    "label": "1",
                     "x": 1,
                     "y": 0
                 },
                 {
-                    "label": "F2",
+                    "label": "2",
                     "x": 2,
                     "y": 0
                 },
                 {
-                    "label": "F3",
+                    "label": "3",
                     "x": 3,
                     "y": 0
                 },
                 {
-                    "label": "F4",
+                    "label": "4",
                     "x": 4,
                     "y": 0
                 },
                 {
-                    "label": "F5",
+                    "label": "5",
                     "x": 5,
                     "y": 0
                 },
                 {
-                    "label": "F6",
+                    "label": "6",
                     "x": 6,
                     "y": 0
                 },
                 {
-                    "label": "F7",
+                    "label": "7",
                     "x": 7,
                     "y": 0
                 },
                 {
-                    "label": "F8",
+                    "label": "8",
                     "x": 8,
                     "y": 0
                 },
                 {
-                    "label": "F9",
+                    "label": "9",
                     "x": 9,
                     "y": 0
                 },
                 {
-                    "label": "F10",
+                    "label": "0",
                     "x": 10,
                     "y": 0
                 },
                 {
-                    "label": "F11",
+                    "label": "-",
                     "x": 11,
                     "y": 0
                 },
                 {
-                    "label": "F12",
+                    "label": "=",
                     "x": 12,
                     "y": 0
                 },
@@ -292,7 +292,7 @@
                     "w": 1.75
                 },
                 {
-                    "label": "Raise",
+                    "label": "Lower",
                     "x": 14,
                     "y": 3
                 },
@@ -308,13 +308,13 @@
                     "w": 1.25
                 },
                 {
-                    "label": "Super",
+                    "label": "Alt",
                     "x": 1.25,
                     "y": 4,
                     "w": 1.25
                 },
                 {
-                    "label": "Alt",
+                    "label": "Lower",
                     "x": 2.5,
                     "y": 4,
                     "w": 1.25
@@ -326,25 +326,25 @@
                     "w": 2.25
                 },
                 {
-                    "label": "Lower",
+                    "label": "Space",
                     "x": 6,
                     "y": 4,
                     "w": 1.25
                 },
                 {
-                    "label": "Raise",
+                    "label": "Enter",
                     "x": 7.25,
                     "y": 4,
                     "w": 2.75
                 },
                 {
-                    "label": "Alt",
+                    "label": "Raise",
                     "x": 10,
                     "y": 4,
                     "w": 1.25
                 },
                 {
-                    "label": "Super",
+                    "label": "Alt",
                     "x": 11.25,
                     "y": 4,
                     "w": 1.25
@@ -380,62 +380,62 @@
                     "y": 0
                 },
                 {
-                    "label": "F1",
+                    "label": "1",
                     "x": 1,
                     "y": 0
                 },
                 {
-                    "label": "F2",
+                    "label": "2",
                     "x": 2,
                     "y": 0
                 },
                 {
-                    "label": "F3",
+                    "label": "3",
                     "x": 3,
                     "y": 0
                 },
                 {
-                    "label": "F4",
+                    "label": "4",
                     "x": 4,
                     "y": 0
                 },
                 {
-                    "label": "F5",
+                    "label": "5",
                     "x": 5,
                     "y": 0
                 },
                 {
-                    "label": "F6",
+                    "label": "6",
                     "x": 6,
                     "y": 0
                 },
                 {
-                    "label": "F7",
+                    "label": "7",
                     "x": 7,
                     "y": 0
                 },
                 {
-                    "label": "F8",
+                    "label": "8",
                     "x": 8,
                     "y": 0
                 },
                 {
-                    "label": "F9",
+                    "label": "9",
                     "x": 9,
                     "y": 0
                 },
                 {
-                    "label": "F10",
+                    "label": "0",
                     "x": 10,
                     "y": 0
                 },
                 {
-                    "label": "F11",
+                    "label": "-",
                     "x": 11,
                     "y": 0
                 },
                 {
-                    "label": "F12",
+                    "label": "=",
                     "x": 12,
                     "y": 0
                 },
@@ -655,7 +655,7 @@
                     "w": 1.75
                 },
                 {
-                    "label": "Raise",
+                    "label": "Lower",
                     "x": 14,
                     "y": 3
                 },
@@ -671,13 +671,13 @@
                     "w": 1.25
                 },
                 {
-                    "label": "Super",
+                    "label": "Alt",
                     "x": 1.25,
                     "y": 4,
                     "w": 1.25
                 },
                 {
-                    "label": "Alt",
+                    "label": "Lower",
                     "x": 2.5,
                     "y": 4,
                     "w": 1.25
@@ -689,25 +689,25 @@
                     "w": 2.25
                 },
                 {
-                    "label": "Lower",
+                    "label": "Space",
                     "x": 6,
                     "y": 4,
                     "w": 1.25
                 },
                 {
-                    "label": "Raise",
+                    "label": "Enter",
                     "x": 7.25,
                     "y": 4,
                     "w": 2.75
                 },
                 {
-                    "label": "Alt",
+                    "label": "Raise",
                     "x": 10,
                     "y": 4,
                     "w": 1.25
                 },
                 {
-                    "label": "Super",
+                    "label": "Alt",
                     "x": 11.25,
                     "y": 4,
                     "w": 1.25

keyboards/bbrfkr/dynamis/keymaps/default/keymap.c

@@ -20,40 +20,40 @@ enum layer_names {
     _QWERTY,
     _LOWER,
     _RAISE,
-    _SETTINGS
+    _SETTINGS,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_QWERTY] = LAYOUT_ansi(
-      KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_DEL,
+      KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
       KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
       KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-      KC_TAB, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP,
-      KC_LCTL, KC_LGUI, KC_LALT,   KC_SPC,      MO(1),     MO(2), KC_RALT, KC_RGUI, KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT
+      KC_TAB, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP,
+      KC_LCTL, KC_LALT, MO(1),   KC_SPC,      KC_SPC,     KC_ENT, MO(2), KC_RALT, KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT
   ),
 
   [_LOWER] = LAYOUT_ansi(
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_PSCR, KC_TRNS, KC_TRNS, KC_WH_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_BTN3, KC_BTN2, KC_WH_D, KC_BTN1, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END, KC_TRNS, KC_TRNS, MO(3), KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,     KC_TRNS,   MO(3), KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS
+      KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_BTN3, KC_BTN2, KC_BTN1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_LGUI, KC_TRNS,   KC_TRNS,     KC_TRNS,   KC_TRNS, MO(3), KC_RGUI, KC_TRNS,       KC_TRNS, KC_TRNS, KC_MUTE
   ),
 
   [_RAISE] = LAYOUT_ansi(
-      KC_ESC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS,
-      KC_TRNS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_QUOT, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_UNDS, KC_PLUS, KC_DQUO, KC_LCBR, KC_RCBR, KC_TRNS, MO(3), KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,     MO(3),     KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS
+      KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_LGUI, MO(3),   KC_TRNS,     KC_TRNS,   KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS,       KC_TRNS, KC_TRNS, KC_MUTE
   ),
 
   [_SETTINGS] = LAYOUT_ansi(
-      QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
-  )
+      QK_BOOT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, RGB_TOG, RGB_MOD, RGB_RMOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, KC_NO, KC_NO,   KC_NO,     KC_NO,   KC_NO, KC_NO, KC_NO, KC_NO,       KC_NO, KC_NO, KC_NO
+  ),
 };

keyboards/bbrfkr/dynamis/keymaps/iso/keymap.c

@@ -20,40 +20,40 @@ enum layer_names {
     _QWERTY,
     _LOWER,
     _RAISE,
-    _SETTINGS
+    _SETTINGS,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_QWERTY] = LAYOUT_iso(
-      KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_DEL,
+      KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
       KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
       KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
-      KC_TAB, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP,
-      KC_LCTL, KC_LGUI, KC_LALT,   KC_SPC,      MO(1),     MO(2), KC_RALT, KC_RGUI, KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT
+      KC_TAB, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP,
+      KC_LCTL, KC_LALT, MO(1),   KC_SPC,      KC_SPC,     KC_ENT, MO(2), KC_RALT, KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT
   ),
 
   [_LOWER] = LAYOUT_iso(
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, KC_TRNS,
-      KC_PSCR, KC_TRNS, KC_TRNS, KC_WH_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_BTN3, KC_BTN2, KC_WH_D, KC_BTN1, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END, KC_TRNS, KC_TRNS, MO(3), KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,     KC_TRNS,   MO(3), KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS
+      KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_BTN3, KC_BTN2, KC_BTN1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_LGUI, KC_TRNS,   KC_TRNS,     KC_TRNS,   KC_TRNS, MO(3), KC_RGUI, KC_TRNS,       KC_TRNS, KC_TRNS, KC_MUTE
   ),
 
   [_RAISE] = LAYOUT_iso(
-      KC_ESC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS,
-      KC_TRNS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_QUOT, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_UNDS, KC_PLUS, KC_DQUO, KC_LCBR, KC_RCBR, KC_TRNS, MO(3), KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,     MO(3),     KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS
+      KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_LGUI, KC_TRNS, MO(3),     KC_TRNS,   KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS,       KC_TRNS, KC_TRNS, KC_MUTE
   ),
 
   [_SETTINGS] = LAYOUT_iso(
-      QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
-  )
+      QK_BOOT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, RGB_TOG, RGB_MOD, RGB_RMOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, KC_NO, KC_NO,   KC_NO,     KC_NO,   KC_NO, KC_NO, KC_NO, KC_NO,       KC_NO, KC_NO, KC_NO
+  ),
 };

keyboards/bbrfkr/dynamis/keymaps/via/keymap.c

@@ -20,40 +20,49 @@ enum layer_names {
     _QWERTY,
     _LOWER,
     _RAISE,
-    _SETTINGS
+    _SETTINGS,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_QWERTY] = LAYOUT_ansi(
-      KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_DEL,
+      KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
       KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
       KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-      KC_TAB, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP,
-      KC_LCTL, KC_LGUI, KC_LALT,   KC_SPC,      MO(1),     MO(2), KC_RALT, KC_RGUI, KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT
+      KC_TAB, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP,
+      KC_LCTL, KC_LALT, MO(1),   KC_SPC,      KC_SPC,     KC_ENT, MO(2), KC_RALT, KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT
   ),
 
   [_LOWER] = LAYOUT_ansi(
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_PSCR, KC_TRNS, KC_TRNS, KC_WH_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_BTN3, KC_BTN2, KC_WH_D, KC_BTN1, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END, KC_TRNS, KC_TRNS, MO(3), KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,     KC_TRNS,   MO(3), KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS
+      KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_BTN3, KC_BTN2, KC_BTN1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_LGUI, KC_TRNS,   KC_TRNS,     KC_TRNS,   KC_TRNS, MO(3), KC_RGUI, KC_TRNS,       KC_TRNS, KC_TRNS, KC_MUTE
   ),
 
   [_RAISE] = LAYOUT_ansi(
-      KC_ESC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS,
-      KC_TRNS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_QUOT, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_UNDS, KC_PLUS, KC_DQUO, KC_LCBR, KC_RCBR, KC_TRNS, MO(3), KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,     MO(3),     KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS
+      KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_LGUI, MO(3),   KC_TRNS,     KC_TRNS,   KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS,       KC_TRNS, KC_TRNS, KC_MUTE
   ),
 
   [_SETTINGS] = LAYOUT_ansi(
-      QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-      KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
-  )
+      QK_BOOT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, RGB_TOG, RGB_MOD, RGB_RMOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+      KC_NO, KC_NO, KC_NO,   KC_NO,     KC_NO,   KC_NO, KC_NO, KC_NO, KC_NO,       KC_NO, KC_NO, KC_NO
+  ),
 };
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+    [_QWERTY] = { ENCODER_CCW_CW(KC_WH_U, KC_WH_D), },
+    [_LOWER] = { ENCODER_CCW_CW(KC_VOLU, KC_VOLD) },
+    [_RAISE] = { ENCODER_CCW_CW(RGB_MOD, RGB_RMOD) },
+    [_SETTINGS] = { ENCODER_CCW_CW(KC_WH_U, KC_WH_D) },
+};
+#endif

keyboards/bbrfkr/dynamis/keymaps/via/rules.mk

@@ -1 +1,2 @@
 VIA_ENABLE = yes
+ENCODER_MAP_ENABLE = yes

keyboards/bbrfkr/dynamis/readme.md

@@ -1,13 +1,13 @@
 # dynamis
 
 ## general information
-![dynamis](https://i.imgur.com/q2C3D2ul.jpg)
+![dynamis](https://i.imgur.com/GRPE5hzh.jpg)
 
 Gasket mounted 65% row staggered keyboard integrated a trackball
 
 * Keyboard Maintainer: [bbrfkr](https://github.com/bbrfkr/)
 * Hardware Supported: dynamis PCBs
-* Hardware Availability: http://github.com/bbrfkr/keyboards
+* Hardware Availability: https://github.com/bbrfkr/dynamis-keyboard
 
 ## bootloader
 

keyboards/cannonkeys/nearfield/config.h

@@ -0,0 +1,35 @@
+/*
+Copyright 2021 Dr.Doof
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B4, D2, D4, D6, D7 }
+#define MATRIX_COL_PINS { D3, D5, C6, C7, B6, B5, B7, F0, F1, F4, F5, F6, F7, B3, B2, D1 }
+#define UNUSED_PINS { E2, E6, D0, B1, B0 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 0

keyboards/cannonkeys/nearfield/info.json

@@ -0,0 +1,376 @@
+{
+    "keyboard_name":"Nearfield",
+    "manufacturer":"JLC",
+    "url":"",
+    "maintainer":"tominabox1",
+    "usb":{
+       "vid":"0x0004",
+       "pid":"0x0002",
+       "device_version":"0.0.1"
+    },
+    "layouts":{
+       "LAYOUT_all":{
+          "layout":[
+             {
+                "label":"~",
+                "x":0,
+                "y":0
+             },
+             {
+                "label":"!",
+                "x":1,
+                "y":0
+             },
+             {
+                "label":"@",
+                "x":2,
+                "y":0
+             },
+             {
+                "label":"#",
+                "x":3,
+                "y":0
+             },
+             {
+                "label":"$",
+                "x":4,
+                "y":0
+             },
+             {
+                "label":"%",
+                "x":5,
+                "y":0
+             },
+             {
+                "label":"^",
+                "x":7.5,
+                "y":0
+             },
+             {
+                "label":"&",
+                "x":8.5,
+                "y":0
+             },
+             {
+                "label":"*",
+                "x":9.5,
+                "y":0
+             },
+             {
+                "label":"(",
+                "x":10.5,
+                "y":0
+             },
+             {
+                "label":")",
+                "x":11.5,
+                "y":0
+             },
+             {
+                "label":"_",
+                "x":12.5,
+                "y":0
+             },
+             {
+                "label":"+",
+                "x":13.5,
+                "y":0
+             },
+             {
+                "label":"Insert",
+                "x":15.5,
+                "y":0
+             },
+             {
+                "label":"Home",
+                "x":16.5,
+                "y":0
+             },
+             {
+                "label":"PgUp",
+                "x":17.5,
+                "y":0
+             },
+             {
+                "label":"Tab",
+                "x":0,
+                "y":1.5
+             },
+             {
+                "label":"Q",
+                "x":1,
+                "y":1.5
+             },
+             {
+                "label":"W",
+                "x":2,
+                "y":1.5
+             },
+             {
+                "label":"E",
+                "x":3,
+                "y":1.5
+             },
+             {
+                "label":"R",
+                "x":4,
+                "y":1.5
+             },
+             {
+                "label":"T",
+                "x":5,
+                "y":1.5
+             },
+             {
+                "label":"Y",
+                "x":7.5,
+                "y":1.5
+             },
+             {
+                "label":"U",
+                "x":8.5,
+                "y":1.5
+             },
+             {
+                "label":"I",
+                "x":9.5,
+                "y":1.5
+             },
+             {
+                "label":"O",
+                "x":10.5,
+                "y":1.5
+             },
+             {
+                "label":"P",
+                "x":11.5,
+                "y":1.5
+             },
+             {
+                "label":"{",
+                "x":12.5,
+                "y":1.5
+             },
+             {
+                "label":"}",
+                "x":13.5,
+                "y":1.5
+             },
+             {
+                "label":"Insert",
+                "x":15.5,
+                "y":1.5
+             },
+             {
+                "label":"Home",
+                "x":16.5,
+                "y":1.5
+             },
+             {
+                "label":"PgUp",
+                "x":17.5,
+                "y":1.5
+             },
+             {
+                "label":"Caps Lock",
+                "x":0,
+                "y":2.5,
+                "w":1.25
+             },
+             {
+                "label":"A",
+                "x":1.25,
+                "y":2.5
+             },
+             {
+                "label":"S",
+                "x":2.25,
+                "y":2.5
+             },
+             {
+                "label":"D",
+                "x":3.25,
+                "y":2.5
+             },
+             {
+                "label":"F",
+                "x":4.25,
+                "y":2.5
+             },
+             {
+                "label":"G",
+                "x":5.25,
+                "y":2.5
+             },
+             {
+                "label":"H",
+                "x":7.75,
+                "y":2.5
+             },
+             {
+                "label":"J",
+                "x":8.75,
+                "y":2.5
+             },
+             {
+                "label":"K",
+                "x":9.75,
+                "y":2.5
+             },
+             {
+                "label":"L",
+                "x":10.75,
+                "y":2.5
+             },
+             {
+                "label":"\"",
+                "x":11.75,
+                "y":2.5
+             },
+             {
+                "label":"Enter",
+                "x":12.75,
+                "y":2.5,
+                "w":1.75
+             },
+             {
+                "label":"Delete",
+                "x":15.5,
+                "y":2.5
+             },
+             {
+                "label":"End",
+                "x":16.5,
+                "y":2.5
+             },
+             {
+                "label":"PgDn",
+                "x":17.5,
+                "y":2.5
+             },
+             {
+                "label":"Shift",
+                "x":0,
+                "y":3.5,
+                "w":1.75
+             },
+             {
+                "label":"Z",
+                "x":1.75,
+                "y":3.5
+             },
+             {
+                "label":"X",
+                "x":2.75,
+                "y":3.5
+             },
+             {
+                "label":"C",
+                "x":3.75,
+                "y":3.5
+             },
+             {
+                "label":"V",
+                "x":4.75,
+                "y":3.5
+             },
+             {
+                "label":"B",
+                "x":5.75,
+                "y":3.5
+             },
+             {
+                "label":"N",
+                "x":8.25,
+                "y":3.5
+             },
+             {
+                "label":"M",
+                "x":9.25,
+                "y":3.5
+             },
+             {
+                "label":"<",
+                "x":10.25,
+                "y":3.5
+             },
+             {
+                "label":">",
+                "x":11.25,
+                "y":3.5
+             },
+             {
+                "label":"?",
+                "x":12.25,
+                "y":3.5
+             },
+             {
+                "label":"r4 dogshift",
+                "x":13.25,
+                "y":3.5,
+                "w":1.25
+             },
+             {
+                "label":"Ctrl",
+                "x":0,
+                "y":4.5,
+                "w":1.25
+             },
+             {
+                "label":"Alt",
+                "x":2.5,
+                "y":4.5,
+                "w":1.25
+             },
+             {
+                "x":3.75,
+                "y":4.5
+             },
+             {
+                "label":"",
+                "x":4.75,
+                "y":4.5,
+                "w":2
+             },
+             {
+                "label":"",
+                "x":8.25,
+                "y":4.5,
+                "w":2.25
+             },
+             {
+                "label":"Alt",
+                "x":10.5,
+                "y":4.5,
+                "w":1.25
+             },
+             {
+                "label":"Ctrl",
+                "x":13,
+                "y":4.5,
+                "w":1.5
+             },
+             {
+                "label":"\u2191",
+                "x":16.5,
+                "y":4.5
+             },
+             {
+                "label":"\u2190",
+                "x":15.5,
+                "y":5.5
+             },
+             {
+                "label":"\u2193",
+                "x":16.5,
+                "y":5.5
+             },
+             {
+                "label":"\u2192",
+                "x":17.5,
+                "y":5.5
+             }
+          ]
+       }
+    }
+ }

keyboards/cannonkeys/nearfield/keymaps/default/keymap.c

@@ -0,0 +1,30 @@
+/*
+Copyright 2021 Dr.Doof
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_all(
+		         KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_INS,  KC_HOME, KC_PGUP,
+		         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_INS,  KC_HOME, KC_PGUP,
+		         KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_QUOT, KC_ENT,           KC_DEL,  KC_END,  KC_PGDN,
+		         KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+		         KC_LCTL, KC_LALT,          KC_SPC,  KC_NO,            KC_SPC,           KC_LALT,          KC_LCTL,          KC_UP,   KC_LEFT,   KC_DOWN,   KC_RIGHT
+
+	)
+};

keyboards/cannonkeys/nearfield/nearfield.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2021 Dr.Doof
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "nearfield.h"

keyboards/cannonkeys/nearfield/nearfield.h

@@ -0,0 +1,35 @@
+/*
+Copyright 2021 Dr.Doof
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define LAYOUT_all( \
+	     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
+	     K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \
+	     K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,      K2E, K2F, K2G, \
+	     K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,                     \
+	     K41, K42,      K44, K45,      K47,      K49,      K4B,      K4D, K4E, K4F, K4G \
+) { \
+	{ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \
+	{ K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+	{ K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, K2F, K2G }, \
+	{ K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX, XXX, XXX, XXX }, \
+	{ K41, K42, XXX, K44, K45, XXX, K47, XXX, K49, XXX, K4B, XXX, K4D, K4E, K4F, K4G } \
+}

keyboards/cannonkeys/nearfield/readme.md

@@ -0,0 +1,31 @@
+# Nearfield
+
+![Nearfield](https://i.imgur.com/hNj44FYh.jpg)
+
+The LZ ErGO is a classic ergonomic design, predating the alice layout, and drawing inspiration from the "Microsoft natural ergonomic" series.
+Nearfield expands on this by increasing the rotation of the two halves of the alpha cluster, each half is rotated 15 degrees towards the center of the board.
+This increased angle forces the user to widen their elbow stance, and align their hands straighter with their forearms while typing.
+
+Aesthetic design: Aside from the obvious layout homage to the ergo, retaining the nav cluster,
+the case design draws inspiration from the M0110 keyboard series from Apple.
+
+bog standard mx and alps support pcb, uses unified c3 daughterboard. 100mm JST cable recommended.
+
+ 
+* Keyboard Maintainer: [TJ Campie](https://github.com/tominabox1)
+* Hardware Supported: Nearfield
+* Hardware Availability: [Cannonkeys](https://cannonkeys.com/collections/nearfield/products/nearfield-extra-pcb-and-daughterboard)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make nearfield:default
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/nearfield/rules.mk

@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/cantor/keymaps/zeromist/keymap.c

@@ -0,0 +1,107 @@
+// Copyright 2022 Diego Palacios (@diepala)
+// SPDX-License-Identifier: GPL-2.0
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+     /*
+      * ┌───┬───┬───┬───┬───┬───┐           ┌───┬───┬───┬───┬───┬───┐
+      * │Tab│ Q │ W │ E │ R │ T │           │ Y │ U │ I │ O │ P │Bsp│
+      * ├───┼───┼───┼───┼───┼───┤           ├───┼───┼───┼───┼───┼───┤
+      * │ESC│ A │ S │ D │ F │ G │           │ H │ J │ K │ L │ ; │ ' │
+      * ├───┼───┼───┼───┼───┼───┤           ├───┼───┼───┼───┼───┼───┤
+      * │Sft│ Z │ X │ C │ V │ B │           │ N │ M │ , │ . │ / │Sft│
+      * └───┴───┴───┴───┴───┴───┘           └───┴───┴───┴───┴───┴───┘
+      *          ┌────┐                                ┌───┐
+      *          │LCTL├───────┐                  ┌─────┤Alt│
+      *          └────┤GUI/Bsp├───────┐      ┌───┤TO(1)├───┘
+      *               └───────┤ALT/ENT│      │SPC├─────┘
+      *                       └───────┘      └───┘
+      */
+    [0] = LAYOUT_split_3x6_3(
+      //--------------------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                                 KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+      //--------------------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_ESCAPE, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                                 KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      //--------------------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_LSFT,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                                 KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+      //--------------------------------------------------------------------------         ---------------------------------------------------------------------------------
+                              KC_LCTL, MT(MOD_LGUI, KC_BSPC), MT(MOD_LALT, KC_ENT),           KC_SPC, TO(1), KC_RALT
+      //--------------------------------------------------------------------------         ---------------------------------------------------------------------------------
+    ),
+     /*
+      * ┌───┬───┬───┬───┬───┬───┐       ┌───┬───┬───┬───┬───┬───┐
+      * │`~ │ 1  │ 2 │ 3 │ 4 │ 5 │       │ 6 │ 7 │ 8 │ 9 │ 0 │Bsp│
+      * ├───┼───┼───┼───┼───┼───┤       ├───┼───┼───┼───┼───┼───┤
+      * │   │ !  │ @ │ # │ $ │ % │       │ ^ │ &  │ * │ ( │ ) │ |  │
+      * ├───┼───┼───┼───┼───┼───┤       ├───┼───┼───┼───┼───┼───┤
+      * │Sft│ += │ -_│ + │ { │ } │       │ [ │ ] │ ; │ : │ \  │    │
+      * └───┴───┴───┴───┴───┴───┘       └───┴───┴───┴───┴───┴───┘
+      *           ┌────────┐                       ┌─────┐
+      *           │ MLCKSCN ├─────┐           ┌────┤TO(3)│
+      *           └────────┤TO(0)├───┐   ┌───┤TO(2)├─────┘
+      *                     └─────┤ < │   │ > ├────┘
+      *                           └───┘   └───┘
+      */
+    [1] = LAYOUT_split_3x6_3(
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_GRV,  KC_1,     KC_2,     KC_3,     KC_4,     KC_5,                   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_TRNS, KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,                KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE,
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_LSFT, KC_EQL,   KC_MINS,  KC_PLUS,  KC_LCBR,  KC_RCBR,                KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, KC_RSFT,
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+                                            KC_TRNS, TO(0), KC_LT,               KC_GT, TO(2), TO(3)
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+    ),
+     /*
+      * ┌────┬──────┬──────┬──────┬──────────┬──────┐       ┌──────┬──────┬──────┬───────┬──────┬───┐
+      * │MSTP│ Play │ PRVS │ Next   │          │ CAPS  │       │ PgDn │ PgUp  │ INS   │ Print │      │Bsp│
+      * ├────┼──────┼──────┼───────┼─────────┼──────┤       ├──────┼──────┼──────┼───────┼──────┼───┤
+      * │    │ HOME │ END  │ LCTRL+C │ LCTRL+V │      │       │ Left │ Down │ Up │ Right │ Del  │   │
+      * ├────┼──────┼──────┼───────┼────────┼──────┤       ├──────┼──────┼──────┼───────┼──────┼───┤
+      * │Sft │ UNDO │ CUT  │ COPY │ PASTE │ RApp │       │ Vol- │ Vol+ │ Mute │       │ RGui │   │
+      * └────┴──────┴──────┴──────┴───────┴──────┘       └──────┴──────┴──────┴───────┴──────┴───┘
+      *                                ┌─────┐                       ┌─────┐
+      *                                │LCTRL├─────┐           ┌─────┤TO(3)│
+      *                                └─────┤TO(0)├───┐   ┌───┤TO(0)├─────┘
+      *                                      └─────┤ALT│   │SPC├─────┘
+      *                                            └───┘   └───┘
+      */
+    [2] = LAYOUT_split_3x6_3(
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_MSTP, KC_MPLY,    KC_MPRV,   KC_MNXT,  KC_NO,    KC_CAPS,              KC_PGDOWN,    KC_PGUP,    KC_INS,      KC_PSCR,    KC_NO,    KC_BSPC,
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_NO,   KC_HOME,    KC_END,    C(KC_C),    C(KC_V),   KC_NO,         KC_LEFT,    KC_DOWN,   KC_UP,    KC_RGHT,    KC_DEL,   KC_NO,
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_TAB,  KC_UNDO,    KC_CUT,    KC_COPY,  KC_PASTE, KC_APP,             KC_VOLD,    KC_VOLU,   KC_MUTE,    KC_NO,      KC_NO,  KC_RSFT,
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+                                            KC_LCTL, TO(0), KC_LALT,            KC_TRNS, KC_TRNS, TO(3)
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+    ),
+     /*
+      * ┌──┬────┬────┬────┬────┬────┐       ┌────┬────┬────┬────┬─────┬─────┐
+      * │  │ F1 │ F2   │ F3 │ F4 │ F5 │       │ F6 │ F7 │ F8 │ F9  │ F10 │ F11 │
+      * ├──┼────┼────┼────┼────┼────┤       ├────┼────┼────┼────┼─────┼─────┤
+      * │  │    │     │    │    │     │       │    │    │    │    │      │ F12 │
+      * ├──┼────┼────┼────┼────┼────┤       ├────┼────┼────┼────┼─────┼─────┤
+      * │  │    │     │    │    │    │       │     │    │    │    │      │     │
+      * └──┴────┴────┴────┴────┴────┘       └────┴────┴────┴────┴─────┴─────┘
+      *                   ┌───┐                        ┌───┐
+      *                   │   ├─────┐           ┌─────┤   │
+      *                   └───┤TO(0)├───┐   ┌───┤     ├───┘
+      *                       └─────┤ENT│   │   ├─────┘
+      *                             └───┘   └───┘
+      */
+    [3] = LAYOUT_split_3x6_3(
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_NO, KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,                   KC_F6,   KC_F7,    KC_F8,    KC_F9,    KC_F10,    KC_F11,
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_NO, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,                   KC_NO,   KC_NO,    KC_NO,    KC_NO,    KC_NO,     KC_F12,
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+        KC_NO, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,                   KC_NO,   KC_NO,    KC_NO,    KC_NO,    KC_NO,     KC_NO,
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+                                              KC_NO, TO(0), KC_NO,              KC_NO, KC_NO, KC_NO
+      //--------------------------------------------------------------         ---------------------------------------------------------------------------------
+    )
+};

keyboards/chord/zero/config.h

@@ -0,0 +1,4 @@
+// Copyright (c) 2022 Simon Hengel <sol@typeful.net>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once

keyboards/chord/zero/info.json

@@ -0,0 +1,65 @@
+{
+    "manufacturer": "Simon Hengel",
+    "keyboard_name": "CHORD ZERO",
+    "usb": {
+        "device_version": "1.0.0",
+        "vid": "0x1D50",
+        "pid": "0x617C"
+    },
+    "url": "https://github.com/sol/chord-zero#readme",
+    "maintainer": "sol",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "steno": true
+    },
+    "processor": "RP2040",
+    "bootloader": "rp2040",
+    "diode_direction": "COL2ROW",
+    "matrix_pins": {
+        "cols": ["GP22", "GP9", "GP21", "GP11", "GP19", "GP12"],
+        "rows": ["GP26", "GP20", "GP18", "GP17", "GP7", "GP10", "GP13", "GP14"]
+    },
+    "layouts": {
+        "LAYOUT_zero": {
+            "layout": [
+                { "matrix": [0, 0], "y": 0, "x": 0 },
+                { "matrix": [0, 1], "y": 0, "x": 1 },
+                { "matrix": [0, 2], "y": 0, "x": 2 },
+                { "matrix": [0, 3], "y": 0, "x": 3 },
+                { "matrix": [0, 4], "y": 0, "x": 4 },
+                { "matrix": [0, 5], "y": 0, "x": 5 },
+                { "matrix": [4, 5], "y": 0, "x": 8 },
+                { "matrix": [4, 4], "y": 0, "x": 9 },
+                { "matrix": [4, 3], "y": 0, "x": 10 },
+                { "matrix": [4, 2], "y": 0, "x": 11 },
+                { "matrix": [4, 1], "y": 0, "x": 12 },
+                { "matrix": [4, 0], "y": 0, "x": 13 },
+
+                { "matrix": [1, 0], "y": 1, "x": 0 },
+                { "matrix": [1, 1], "y": 1, "x": 1 },
+                { "matrix": [1, 2], "y": 1, "x": 2 },
+                { "matrix": [1, 3], "y": 1, "x": 3 },
+                { "matrix": [1, 4], "y": 1, "x": 4 },
+                { "matrix": [1, 5], "y": 1, "x": 5 },
+                { "matrix": [5, 5], "y": 1, "x": 8 },
+                { "matrix": [5, 4], "y": 1, "x": 9 },
+                { "matrix": [5, 3], "y": 1, "x": 10 },
+                { "matrix": [5, 2], "y": 1, "x": 11 },
+                { "matrix": [5, 1], "y": 1, "x": 12 },
+                { "matrix": [5, 0], "y": 1, "x": 13 },
+
+                { "matrix": [3, 3], "y": 3, "x": 3 },
+                { "matrix": [3, 4], "y": 3, "x": 4 },
+                { "matrix": [3, 5], "y": 3, "x": 5 },
+                { "matrix": [7, 5], "y": 3, "x": 8 },
+                { "matrix": [7, 4], "y": 3, "x": 9 },
+                { "matrix": [7, 3], "y": 3, "x": 10 }
+            ]
+        }
+    }
+}

keyboards/chord/zero/keymaps/default/keymap.c

@@ -0,0 +1,25 @@
+// Copyright (c) 2022 Simon Hengel <sol@typeful.net>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+#include "keymap_steno.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_zero(
+        STN_FN,  STN_S1,  STN_TL,  STN_PL,  STN_HL,  STN_ST1,          STN_ST3, STN_FR,  STN_PR,  STN_LR,  STN_TR,  STN_DR,
+        STN_PWR, STN_S2,  STN_KL,  STN_WL,  STN_RL,  STN_ST2,          STN_ST4, STN_RR,  STN_BR,  STN_GR,  STN_SR,  STN_ZR,
+                                   STN_N1,  STN_A,   STN_O,            STN_E,   STN_U,   STN_N7
+    )
+};
+
+const uint16_t PROGMEM bootloader_combo[] = {
+    keymaps[0][0][0],           keymaps[0][4][0],
+    keymaps[0][1][0],           keymaps[0][5][0],
+        keymaps[0][3][3],   keymaps[0][7][3]
+, COMBO_END };
+
+combo_t key_combos[] = {
+    COMBO(bootloader_combo, QK_BOOTLOADER),
+};
+
+uint16_t COMBO_LEN = sizeof(key_combos) / sizeof(key_combos[0]);

keyboards/chord/zero/keymaps/default/rules.mk

@@ -0,0 +1 @@
+COMBO_ENABLE = yes

keyboards/chord/zero/readme.md

@@ -0,0 +1,37 @@
+# CHORD ZERO Stenographic Keyboard
+
+![CHORD ZERO](https://i.imgur.com/aS2MPQ2h.jpg)
+
+CHORD ZERO is a stenographic keyboard that can be used with
+[Plover](https://www.openstenoproject.org/plover/) or any other application
+that supports the [TX
+Bolt](https://docs.qmk.fm/#/feature_stenography?id=tx-bolt) or
+[GeminiPR](https://docs.qmk.fm/#/feature_stenography?id=geminipr) protocol.
+
+* Keyboard Maintainer: [Simon Hengel](https://github.com/sol)
+* Hardware Supported: REV 0, REV 1
+* Hardware Availability: https://github.com/sol/chord-zero#readme
+
+Make example for this keyboard (after setting up your build environment):
+
+    make chord/zero:default
+
+or
+
+    qmk compile -kb chord/zero -km default
+
+This will generate `chord_zero_default.uf2`.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Reset key combo**: Press the six keys at the outer columns on each side of the keyboard simultaneously while it is plugged in 
+* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
+* **Physical reset button**: Press the button on the back of the PCB and plug in the keyboard
+
+Once the keyboard is in bootloader mode you can mount it as a USB mass storage
+device and copy the firmware (the file `chord_zero_default.uf2`) onto it.  Once
+copying is completed the keyboard will reboot automatically.

keyboards/chord/zero/rules.mk

@@ -0,0 +1 @@
+# This file intentionally left blank

keyboards/dmqdesign/spin/keymaps/spidey3_pad/config.h

@@ -24,7 +24,7 @@
 #undef LOCKING_SUPPORT_ENABLE
 
 #define LAYER_STATE_8BIT
-#define MAX_LAYER 4
+#define MAX_LAYER 5
 
 #undef RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/dmqdesign/spin/keymaps/spidey3_pad/keymap.c

@@ -61,11 +61,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         RGB_RMOD,  RGB_TOG,   RGB_MOD),
 
     [_FN] = LAYOUT(
-        KC_TRNS,   DEBUG,     QK_BOOT,   KC_TRNS,
+        KC_NO,     DEBUG,     QK_BOOT,   KC_TRNS,
         KC_NO,     KC_NO,     EEP_RST,   KC_TRNS,
         KC_NO,     KC_NO,     KC_NO,     KC_TRNS,
-        KC_NO,     KC_NO,     KC_NO),
+        KC_TRNS,   KC_NO,     KC_NO),
 };
+
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+    [_MACRO]  = { ENCODER_CCW_CW(KC_BRID,       KC_BRIU),      ENCODER_CCW_CW(C(KC_MINS), C(KC_EQL)), ENCODER_CCW_CW(KC_VOLD,    KC_VOLU) },
+    [_NUMPAD] = { ENCODER_CCW_CW(KC_BRID,       KC_BRIU),      ENCODER_CCW_CW(C(KC_MINS), C(KC_EQL)), ENCODER_CCW_CW(KC_VOLD,    KC_VOLU) },
+    [_CURSOR] = { ENCODER_CCW_CW(KC_BRID,       KC_BRIU),      ENCODER_CCW_CW(C(KC_MINS), C(KC_EQL)), ENCODER_CCW_CW(KC_VOLD,    KC_VOLU) },
+    [_RGB]    = { ENCODER_CCW_CW(RGB_HUD,       RGB_HUI     ), ENCODER_CCW_CW(RGB_SAD,    RGB_SAI  ), ENCODER_CCW_CW(RGB_VAD,    RGB_VAI) },
+    [_FN]     = { ENCODER_CCW_CW(KC_BRID,       KC_BRIU),      ENCODER_CCW_CW(C(KC_MINS), C(KC_EQL)), ENCODER_CCW_CW(KC_VOLD,    KC_VOLU) },
+};
+
 // clang-format on
 
 typedef enum layer_ack {
@@ -153,9 +162,22 @@ void spidey_glow(void) {
     rgblight_sethsv(255, 230, 128);
 }
 
-void eeconfig_init_user(void) { spidey_glow(); }
+void eeconfig_init_user(void) {
+    spidey_glow();
+}
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    dprintf("key event: kc: %02X, col: %02u, row: %02u, pressed: %u mods: %08b "
+#if !defined(NO_ACTION_ONESHOT)
+            "os: %08b "
+#endif
+            "weak: %08b\n",
+            keycode, record->event.key.col, record->event.key.row, record->event.pressed, bitrev(get_mods()),
+#if !defined(NO_ACTION_ONESHOT)
+            bitrev(get_oneshot_mods()),
+#endif
+            bitrev(get_weak_mods()));
+
     if (record->event.pressed) {
         switch (keycode) {
             // Re-implement this here, but fix the persistence!
@@ -208,39 +230,3 @@ void post_process_record_user(uint16_t keycode, keyrecord_t *record) {
     }
 }
 
-bool encoder_update_user(uint8_t index, bool clockwise) {
-    switch (get_highest_layer(layer_state)) {
-        case _RGB:
-            if (index == 0) {
-                if (clockwise) {
-                    rgblight_increase_hue();
-                } else {
-                    rgblight_decrease_hue();
-                }
-            } else if (index == 1) {
-                if (clockwise) {
-                    rgblight_increase_sat();
-                } else {
-                    rgblight_decrease_sat();
-                }
-            } else if (index == 2) {
-                if (clockwise) {
-                    rgblight_increase_val();
-                } else {
-                    rgblight_decrease_val();
-                }
-            }
-            break;
-
-        default:
-            if (index == 0) {
-                tap_code16(C(S(clockwise ? KC_EQL : KC_MINS)));
-            } else if (index == 1) {
-                tap_code16(C(clockwise ? KC_EQL : KC_MINS));
-            } else if (index == 2) {
-                tap_code(clockwise ? KC_VOLU : KC_VOLD);
-            }
-            break;
-    }
-    return true;
-}

keyboards/dmqdesign/spin/keymaps/spidey3_pad/rules.mk

@@ -1,7 +1,7 @@
 MOUSEKEY_ENABLE    = no
 MIDI_ENABLE        = no
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+BOOTMAGIC_ENABLE   = yes
 LTO_ENABLE         = yes
-CONSOLE_ENABLE     = yes    # Console for debug
+CONSOLE_ENABLE     = yes
 GRAVE_ESC_ENABLE   = no
-
+ENCODER_MAP_ENABLE = yes

keyboards/ez_maker/directpins/rp2040/info.json

@@ -0,0 +1,64 @@
+{
+    "manufacturer": "Raspberry Pi",
+    "keyboard_name": "DirectPins RP2040",
+    "maintainer": "jepler",
+    "bootloader": "rp2040",
+    "debounce": 5,
+    "features": {
+        "bootmagic": true,
+        "extrakey": true,
+        "mousekey": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["GP0", null],
+            ["GP1", null],
+
+            ["GP2", null],
+            ["GP3", null],
+            ["GP4", null],
+            ["GP5", "GP28"],
+
+            ["GP6", "GP27"],
+            ["GP7", "GP26"],
+            ["GP8", null],
+            ["GP9", "GP22"],
+
+            ["GP10", "GP21"],
+            ["GP11", "GP20"],
+            ["GP12", "GP19"],
+            ["GP13", "GP18"],
+
+            ["GP14", "GP17"],
+            ["GP15", "GP16"]
+        ]
+    },
+    "processor": "RP2040",
+    "usb": {
+        "device_version": "0.0.1",
+        "pid": "0x2326",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"GP0", "matrix": [0, 0], "x":0, "y":0},
+                {"label":"GP1", "matrix": [1, 0], "x":0, "y":1},
+                {"label":"GP2", "matrix": [2, 0], "x":0, "y":3},
+                {"label":"GP3", "matrix": [3, 0], "x":0, "y":4},
+                {"label":"GP4", "matrix": [4, 0], "x":0, "y":5},
+                {"label":"GP5", "matrix": [5, 0], "x":0, "y":6}, {"label":"GP28", "matrix": [5, 1], "x":2, "y":6},
+                {"label":"GP6", "matrix": [6, 0], "x":0, "y":8}, {"label":"GP27", "matrix": [6, 1], "x":2, "y":8},
+                {"label":"GP7", "matrix": [7, 0], "x":0, "y":9}, {"label":"GP26", "matrix": [7, 1], "x":2, "y":9},
+                {"label":"GP8", "matrix": [8, 0], "x":0, "y":10},
+                {"label":"GP9", "matrix": [9, 0], "x":0, "y":11}, {"label":"GP22", "matrix": [9, 1], "x":2, "y":11},
+                {"label":"GP10", "matrix": [10, 0], "x":0, "y":13}, {"label":"GP21", "matrix": [10, 1], "x":2, "y":13},
+                {"label":"GP11", "matrix": [11, 0], "x":0, "y":14}, {"label":"GP20", "matrix": [11, 1], "x":2, "y":14},
+                {"label":"GP12", "matrix": [12, 0], "x":0, "y":15}, {"label":"GP19", "matrix": [12, 1], "x":2, "y":15},
+                {"label":"GP13", "matrix": [13, 0], "x":0, "y":16}, {"label":"GP18", "matrix": [13, 1], "x":2, "y":16},
+                {"label":"GP14", "matrix": [14, 0], "x":0, "y":18}, {"label":"GP17", "matrix": [14, 1], "x":2, "y":18},
+                {"label":"GP15", "matrix": [15, 0], "x":0, "y":19}, {"label":"GP16", "matrix": [15, 1], "x":2, "y":19}
+            ]
+        }
+    }
+}

keyboards/ez_maker/directpins/rp2040/keymaps/default/keymap.json

@@ -0,0 +1,25 @@
+{
+    "keyboard": "ez_maker/directpins/rp2040",
+    "keymap": "default",
+    "layout": "LAYOUT_all",
+    "layers": [
+        [
+            "KC_0",
+            "KC_1",
+            "KC_2",
+            "KC_3",
+            "KC_4",
+            "KC_5", "KC_P",
+            "KC_6", "KC_O",
+            "KC_7", "KC_N",
+            "KC_8",
+            "KC_9", "KC_M",
+            "KC_A", "KC_L",
+            "KC_B", "KC_K",
+            "KC_C", "KC_J",
+            "KC_D", "KC_I",
+            "KC_E", "KC_H",
+            "KC_F", "KC_G"
+        ]
+    ]
+}

keyboards/ez_maker/directpins/rp2040/readme.md

@@ -0,0 +1,19 @@
+# DirectPins
+
+![Raspberry Pi Pico pinout guide](https://learn.adafruit.com/getting-started-with-raspberry-pi-pico-circuitpython/pinouts)
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+* Keyboard Maintainer: [Jeff Epler](https://github.com/jepler)
+* Hardware Supported: Raspberry Pi Pico, other RP2040 boards
+* Hardware Availability: Raspberry Pi, SparkFun, Adafruit, other makers
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ez_maker/directpins/rp2040 -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb ez_maker/directpins/rp2040 -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ez_maker/directpins/rp2040/rules.mk

@@ -0,0 +1 @@
+# This file intentionally left blank

keyboards/fjlabs/avalon/avalon.c

@@ -0,0 +1,14 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "avalon.h"

keyboards/fjlabs/avalon/avalon.h

@@ -0,0 +1,32 @@
+/*
+Copyright 2022 <hello@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* Phantom Keymap Definitions */
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,      \
+    K40, K41, K42, K43,                K47,           K4A, K4B,      K4D, K4E, K4F  \
+) { \
+    { K00, K01, K02, K03,   K04,     K05,   K06,   K07,   K08,   K09,   K0A, K0B,   K0C,   K0D, K0E, K0F   }, \
+    { K10, K11, K12, K13,   K14,     K15,   K16,   K17,   K18,   K19,   K1A, K1B,   K1C,   K1D, K1E, K1F   }, \
+    { K20, K21, K22, K23,   K24,     K25,   K26,   K27,   K28,   K29,   K2A, K2B,   K2C,   K2D, K2E, K2F   }, \
+    { K30, K31, K32, K33,   K34,     K35,   K36,   K37,   K38,   K39,   K3A, K3B,   K3C,   K3D, K3E, KC_NO }, \
+    { K40, K41, K42, K43,   KC_NO,   KC_NO, KC_NO, K47,   KC_NO, KC_NO, K4A, K4B,   KC_NO, K4D, K4E, K4F   }  \
+}

keyboards/fjlabs/avalon/config.h

@@ -0,0 +1,76 @@
+/*
+Copyright 2022 <hello@fjlaboratories.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *å
+*/
+
+// Checked with Eagle Schematic
+#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
+#define MATRIX_COL_PINS { B0, F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Define Indicator LED's */
+#define LED_CAPS_LOCK_PIN C7
+
+/* Define RGB Underglow */
+#define RGB_DI_PIN D6
+#define RGBLED_NUM 6
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLIGHT_LIMIT_VAL 255
+#define RGB_VAL_STEP 12
+#define RGBLIGHT_DEFAULT_SPD 144
+#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL
+

keyboards/fjlabs/avalon/info.json

@@ -0,0 +1,94 @@
+{
+    "keyboard_name": "Avalon",
+    "manufacturer": "Trailblazer Keyboards",
+    "url": "https://fjlaboratories.com/",
+    "maintainer": "FJLaboratories",
+    "usb": {
+        "vid": "0x7074",
+        "pid": "0x0015",
+        "device_version": "0.0.1"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1.25, "y": 0},
+                {"x": 2.25, "y": 0},
+                {"x": 3.25, "y": 0},
+                {"x": 4.25, "y": 0},
+                {"x": 5.25, "y": 0},
+                {"x": 6.25, "y": 0},
+                {"x": 7.25, "y": 0},
+                {"x": 8.25, "y": 0},
+                {"x": 9.25, "y": 0},
+                {"x": 10.25, "y": 0},
+                {"x": 11.25, "y": 0},
+                {"x": 12.25, "y": 0},
+                {"x": 13.25, "y": 0},
+                {"x": 14.25, "y": 0},
+                {"x": 15.25, "y": 0},
+                {"x": 16.5, "y": 0},
+
+                {"x": 0, "y": 1},
+                {"x": 1.25, "y": 1, "w": 1.5},
+                {"x": 2.75, "y": 1},
+                {"x": 3.75, "y": 1},
+                {"x": 4.75, "y": 1},
+                {"x": 5.75, "y": 1},
+                {"x": 6.75, "y": 1},
+                {"x": 7.75, "y": 1},
+                {"x": 8.75, "y": 1},
+                {"x": 9.75, "y": 1},
+                {"x": 10.75, "y": 1},
+                {"x": 11.75, "y": 1},
+                {"x": 12.75, "y": 1},
+                {"x": 13.75, "y": 1},
+                {"x": 14.75, "y": 1, "w": 1.5},
+                {"x": 16.5, "y": 1},
+
+                {"x": 0, "y": 2},
+                {"x": 1.25, "y": 2, "w": 1.75},
+                {"x": 3, "y": 2},
+                {"x": 4, "y": 2},
+                {"x": 5, "y": 2},
+                {"x": 6, "y": 2},
+                {"x": 7, "y": 2},
+                {"x": 8, "y": 2},
+                {"x": 9, "y": 2},
+                {"x": 10, "y": 2},
+                {"x": 11, "y": 2},
+                {"x": 12, "y": 2},
+                {"x": 13, "y": 2},
+                {"x": 14, "y": 2, "w": 2.25},
+                {"x": 16.5, "y": 2},
+
+                {"x": 0, "y": 3},
+                {"x": 1.25, "y": 3, "w": 1.25},
+                {"x": 2.5, "y": 3},
+                {"x": 3.5, "y": 3},
+                {"x": 4.5, "y": 3},
+                {"x": 5.5, "y": 3},
+                {"x": 6.5, "y": 3},
+                {"x": 7.5, "y": 3},
+                {"x": 8.5, "y": 3},
+                {"x": 9.5, "y": 3},
+                {"x": 19.5, "y": 3},
+                {"x": 11.5, "y": 3},
+                {"x": 12.5, "y": 3},
+                {"x": 13.5, "y": 3, "w": 1.75},
+                {"x": 15.25, "y": 3},
+
+                {"x": 0, "y": 4},
+                {"x": 1.25, "y": 4, "w": 1.25},
+                {"x": 2.5, "y": 4, "w": 1.25},
+                {"x": 3.75, "y": 4, "w": 1.25},
+                {"x": 5, "y": 4, "w": 6.25},
+                {"x": 11.25, "y": 4, "w": 1.25},
+                {"x": 12.5, "y": 4, "w": 1.25},
+                {"x": 14.25, "y": 4},
+                {"x": 15.25, "y": 4},
+                {"x": 16.25, "y": 4}
+            ]
+        }
+    }
+}

keyboards/fjlabs/avalon/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+        [_LAYER0] = LAYOUT_all(
+        KC_F1, KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,  KC_GRV,
+        KC_F2, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        KC_F3, KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGDN,
+        KC_F4, KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,
+        KC_F5, KC_LCTL, KC_LALT, KC_LGUI,                                     KC_SPC,                    KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_all(
+        KC_TRNS, KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC, KC_DEL,  KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET,   KC_PGUP, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_PGDN,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                   KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT
+    )
+};

keyboards/fjlabs/avalon/keymaps/via/keymap.c

@@ -0,0 +1,57 @@
+/*
+Copyright 2022 <hello@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+    _LAYER2,
+    _LAYER3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+        [_LAYER0] = LAYOUT_all(
+        KC_F1, KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_GRV,
+        KC_F2, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        KC_F3, KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_DEL,  KC_PGDN,
+        KC_F4, KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,
+        KC_F5, KC_LCTL, KC_LALT, KC_LGUI,                                     KC_SPC,                    KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_all(
+        KC_TRNS, KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC, KC_DEL,  KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET,   KC_PGUP, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_PGDN,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                   KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT
+    ),
+
+    [_LAYER2] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER3] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/fjlabs/avalon/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/fjlabs/avalon/readme.md

@@ -0,0 +1,19 @@
+# Avalon PCB by FJLaboratories
+
+The following is the QMK Firmware for the Avalon PCB, both Solder and Hotswap, for Trailblazer Keyboards.
+* Keyboard Maintainer: FJLaboratories
+* Hardware Supported: Avalon
+
+Make example for this keyboard (after setting up your build environment):
+
+    make fjlabs/avalon:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/fjlabs/avalon/rules.mk

@@ -0,0 +1,21 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency
+F_CPU = 8000000
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/fjlabs/peaker/config.h

@@ -0,0 +1,93 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *å
+*/
+
+// Checked with Eagle Schematic
+#define MATRIX_ROW_PINS { B5, B6, C0, E1, E0 }
+#define MATRIX_COL_PINS { F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, A7, D5, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Define less important options */
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT

keyboards/fjlabs/peaker/info.json

@@ -0,0 +1,94 @@
+{
+    "keyboard_name": "Peaker",
+    "manufacturer": "FJLaboratories",
+    "url": "http://www.lucidkb.com",
+    "maintainer": "Lucid",
+    "usb": {
+        "vid": "0x7074",
+        "pid": "0x0020",
+        "device_version": "0.0.1"
+    },
+    "layouts": {
+        "LAYOUT_tkl_all": {
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Back Space", "x":13, "y":0},
+                {"label":"Back Space", "x":14, "y":0},
+                {"label":"Insert", "x":15.25, "y":0},
+                {"label":"Home", "x":16.25, "y":0},
+                {"label":"PgUp", "x":17.25, "y":0},
+
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Delete", "x":15.25, "y":1},
+                {"label":"End", "x":16.25, "y":1},
+                {"label":"PgDn", "x":17.25, "y":1},
+
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"SQ", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"Shift", "x":14, "y":3},
+                {"label":"\u2191", "x":16.25, "y":3},
+
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25},
+                {"label":"\u2190", "x":15.25, "y":4},
+                {"label":"\u2193", "x":16.25, "y":4},
+                {"label":"\u2192", "x":17.25, "y":4}
+            ]
+        }
+    }
+}

keyboards/fjlabs/peaker/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_LAYER0] = LAYOUT_tkl_all(
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, 
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSPC, KC_ENT, 
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_tkl_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/fjlabs/peaker/keymaps/via/keymap.c

@@ -0,0 +1,57 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+    _LAYER2,
+    _LAYER3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_LAYER0] = LAYOUT_tkl_all(
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, 
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSPC, KC_ENT, 
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_tkl_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER1] = LAYOUT_tkl_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER1] = LAYOUT_tkl_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/fjlabs/peaker/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/fjlabs/peaker/peaker.c

@@ -0,0 +1,14 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "peaker.h"

keyboards/fjlabs/peaker/peaker.h

@@ -0,0 +1,32 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* === All used matrix spots populated === */
+#define LAYOUT_tkl_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,                \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,      K3C, K3D,      K3F,      \
+    K40, K41, K42,           K45,                K49, K4A, K4B,      K4D, K4E, K4F, K4G  \
+) { \
+    { K00, K01,   K02, K03,   K04,   K05, K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D,   K0E,   K0F,   K0G   }, \
+    { K10, K11,   K12, K13,   K14,   K15, K16,   K17,   K18,   K19, K1A, K1B,   K21,   K1D,   K1E,   K1F,   K1G   }, \
+    { K20, K21,   K22, K23,   K24,   K25, K26,   K27,   K28,   K29, K2A, K2B,   K2C,   K2D,   KC_NO, KC_NO, KC_NO }, \
+    { K30, K31,   K32, K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, KC_NO, K3C,   K3D,   KC_NO, K3F,   KC_NO }, \
+    { K40, K41,   K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B,   KC_NO, K4D,   K4E,   K4F,   K4G   } \
+}

keyboards/fjlabs/peaker/readme.md

@@ -0,0 +1,13 @@
+# Peaker Hotswap PCB by FJLaboratories
+
+The following is the QMK Firmware for the Peaker by [FJLaboratories](http://www.fjlaboratories.com).
+* Keyboard Maintainer: FJLaboratories
+* Hardware Supported: Peaker
+
+Make example for this keyboard (after setting up your build environment):
+
+    make fjlabs/peaker:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+You can enter the bootloader by pressing the Reset button on the back of the PCB.

keyboards/fjlabs/peaker/rules.mk

@@ -0,0 +1,21 @@
+# MCU name
+MCU = at90usb646
+
+# Processor frequency
+F_CPU = 8000000
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/fjlabs/sinanjuwk/config.h

@@ -0,0 +1,96 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+// Checked with Eagle Schematic
+#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5  }
+#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Define Indicator LED's */
+#define LED_CAPS_LOCK_PIN C7
+
+/* Define less important options */
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT

keyboards/fjlabs/sinanjuwk/info.json

@@ -0,0 +1,84 @@
+{
+    "keyboard_name": "Sinanju WK",
+    "manufacturer": "FJLabs",
+    "url": "https://www.fjlaboratories.com",
+    "maintainer": "FJLabs",
+    "usb": {
+        "vid": "0x7074",
+        "pid": "0x1023",
+        "device_version": "0.0.1"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2, "w":2.25},
+
+                {"x":0, "y":3, "w":2.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25}
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.25},
+                {"x":11.25, "y":4, "w":1.25},
+                {"x":12.5, "y":4, "w":1.25},
+                {"x":13.75, "y":4, "w":1.25}
+            ]
+        }
+    }
+}

keyboards/fjlabs/sinanjuwk/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+        [_LAYER0] = LAYOUT_all(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,      KC_MINS, KC_EQL,  KC_BSPC, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,      KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,   KC_QUOT, KC_ENT,  KC_DEL,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,   KC_RSFT, MO(1),
+        KC_LCTL, KC_LWIN, KC_LALT,                            KC_SPC,                             MO(1), KC_RALT, KC_RWIN, KC_RCTL
+    ),
+
+    [_LAYER1] = LAYOUT_all(
+        KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  
+        KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/fjlabs/sinanjuwk/keymaps/via/keymap.c

@@ -0,0 +1,58 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+    _LAYER2,
+    _LAYER3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_LAYER0] = LAYOUT_all(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_DEL,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+        KC_LCTL, KC_LWIN, KC_LALT,                            KC_SPC,                             MO(1), KC_RALT, KC_RWIN, KC_RCTL
+    ),
+
+    [_LAYER1] = LAYOUT_all(
+        KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  
+        KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER2] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER3] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+
+};

keyboards/fjlabs/sinanjuwk/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/fjlabs/sinanjuwk/readme.md

@@ -0,0 +1,17 @@
+# Sinanju WK
+
+The following is the QMK Firmware for the Windz Sinanju WK PCB. 
+ 
+
+* Keyboard Maintainer: FJLabs
+* Hardware Supported: Sinanju WK
+
+Make example for this keyboard (after setting up your build environment):
+
+    make fjlabs/sinanjuwk:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Bootloader can be entered by pressing the reset button near the main microcontroller while the board is plugged in. Alternatively, it may be entered by holding the top-left-most switch and plugging in the PCB while held.

keyboards/fjlabs/sinanjuwk/rules.mk

@@ -0,0 +1,21 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency
+F_CPU = 8000000
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/fjlabs/sinanjuwk/sinanjuwk.c

@@ -0,0 +1,14 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "sinanjuwk.h"

keyboards/fjlabs/sinanjuwk/sinanjuwk.h

@@ -0,0 +1,32 @@
+/*
+Copyright 2022 <felix@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* Midway60 Keymap Definitions */
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,                     K47,           K4A, K4B, K4C, K4D  \
+) { \
+    { K00, K01,   K02, K03,   K04,     K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D }, \
+    { K10, K11,   K12, K13,   K14,     K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D }, \
+    { K20, K21,   K22, K23,   K24,     K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D }, \
+    { K30, KC_NO, K32, K33,   K34,     K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D }, \
+    { K40, K41,   K42, KC_NO, KC_NO,   KC_NO, KC_NO, K47,   KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D }  \
+}

keyboards/gmmk/gmmk2/p96/ansi/keymaps/default/keymap.c

@@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _FL: Function Layer
    */
 [_FL] = LAYOUT(
-    QK_BOOT,  KC_MYCM,  KC_WHOM,  KC_CALC,  KC_MSEL,  KC_MPRV,  KC_MRWD,  KC_MPLY,  KC_MSTP,  KC_MUTE,  KC_VOLU,  KC_VOLD,  _______,   _______,  _______,  _______,  _______,  _______,
+    QK_BOOT,  KC_MYCM,  KC_WHOM,  KC_CALC,  KC_MSEL,  KC_MPRV,  KC_MRWD,  KC_MPLY,  KC_MSTP,  KC_MUTE,  KC_VOLD,  KC_VOLU,  _______,   _______,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,             _______,  _______,  _______,

keyboards/handwired/hillside/48/keymaps/manna-harbour_miryoku/config.h

@@ -0,0 +1,38 @@
+// Copyright 2022 Davide Masserut (@mssdvd)
+// Copyright 2019 Manna Harbour
+// https://github.com/manna-harbour/miryoku
+
+// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+#pragma once
+
+#define XXX KC_NO
+
+// clang-format off
+#if defined MIRYOKU_MAPPING_EXTENDED_THUMBS
+#define LAYOUT_miryoku( \
+     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, \
+     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, \
+     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29, \
+     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39 \
+) \
+LAYOUT( \
+XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX, \
+XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX, \
+XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX, \
+          XXX, XXX, K32, K33, K34,      K35, K36, K37, XXX, XXX \
+)
+#else
+#define LAYOUT_miryoku( \
+     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, \
+     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, \
+     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29, \
+     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39 \
+) \
+LAYOUT( \
+XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX, \
+XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX, \
+XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX, \
+          XXX, K32, K33, K34, XXX,      XXX, K35, K36, K37, XXX \
+)
+#endif

keyboards/handwired/hillside/48/keymaps/manna-harbour_miryoku/keymap.c

@@ -0,0 +1,4 @@
+// Copyright 2019 Manna Harbour
+// https://github.com/manna-harbour/miryoku
+
+// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/handwired/stef9998/split_5x7/config.h

@@ -0,0 +1,20 @@
+/*
+Copyright 2022 stef9998
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"

keyboards/handwired/stef9998/split_5x7/info.json

@@ -0,0 +1,97 @@
+{
+  "keyboard_name": "Split_5x7",
+  "url": "",
+  "maintainer": "stef9998",
+  "manufacturer": "Stef9998",
+  "usb": {
+    "vid": "0x57EF",
+    "pid": "0x6063",
+    "device_version": "1.0.0"
+  },
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"label":"Esc", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"F1", "x":6, "y":0},
+
+        {"label":"Tab", "x":0, "y":1},
+        {"label":"Q", "x":1, "y":1},
+        {"label":"W", "x":2, "y":1},
+        {"label":"E", "x":3, "y":1},
+        {"label":"R", "x":4, "y":1},
+        {"label":"T", "x":5, "y":1},
+        {"label":"[", "x":6, "y":1},
+
+        {"label":"Caps Lock", "x":0, "y":2},
+        {"label":"A", "x":1, "y":2},
+        {"label":"S", "x":2, "y":2},
+        {"label":"D", "x":3, "y":2},
+        {"label":"F", "x":4, "y":2},
+        {"label":"G", "x":5, "y":2},
+        {"label":"=", "x":6, "y":2},
+
+        {"label":"Shift", "x":0, "y":3},
+        {"label":"Z", "x":1, "y":3},
+        {"label":"X", "x":2, "y":3},
+        {"label":"C", "x":3, "y":3},
+        {"label":"V", "x":4, "y":3},
+        {"label":"B", "x":5, "y":3},
+        {"label":"F3", "x":6, "y":3},
+
+        {"label":"Ctrl", "x":0, "y":4},
+        {"label":"Ctrl", "x":1, "y":4},
+        {"label":"Gui", "x":2, "y":4, "w":1.25},
+        {"label":"Alt", "x":3.25, "y":4, "w":1.25},
+        {"label":"Space", "x":4.5, "y":4, "w":1.5},
+        {"label":"F5", "x":6, "y":4},
+
+
+        {"label":"F2", "x":14, "y":0},
+        {"label":"6", "x":9, "y":0},
+        {"label":"7", "x":10, "y":0},
+        {"label":"8", "x":11, "y":0},
+        {"label":"9", "x":12, "y":0},
+        {"label":"0", "x":13, "y":0},
+        {"label":"Backspace", "x":14, "y":0},
+
+        {"label":"]", "x":8, "y":1},
+        {"label":"Y", "x":9, "y":1},
+        {"label":"U", "x":10, "y":1},
+        {"label":"I", "x":11, "y":1},
+        {"label":"O", "x":12, "y":1},
+        {"label":"P", "x":13, "y":1},
+        {"label":"\\", "x":14, "y":1},
+
+        {"label":"-", "x":8, "y":2},
+        {"label":"H", "x":9, "y":2},
+        {"label":"J", "x":10, "y":2},
+        {"label":"K", "x":11, "y":2},
+        {"label":"L", "x":12, "y":2},
+        {"label":";", "x":13, "y":2},
+        {"label":"Enter", "x":14, "y":2},
+
+        {"label":"F4", "x":8, "y":3},
+        {"label":"N", "x":9, "y":3},
+        {"label":"M", "x":10, "y":3},
+        {"label":",", "x":11, "y":3},
+        {"label":".", "x":12, "y":3},
+        {"label":"/", "x":13, "y":3},
+        {"label":"Shift", "x":14, "y":3},
+
+        {"label":"F5", "x":8, "y":4},
+        {"label":"Space", "x":9, "y":4, "w":1.5},
+        {"label":"AltGr", "x":10.5, "y":4, "w":1.25},
+        {"label":"Fn", "x":11.75, "y":4, "w":1.25},
+        {"label":"Ctrl", "x":13, "y":4},
+        {"label":"Ctrl", "x":13, "y":4}
+
+
+      ]
+    }
+  }
+}

keyboards/handwired/stef9998/split_5x7/keymaps/default/config.h

@@ -0,0 +1,28 @@
+/*
+Copyright 2022 stef9998
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+// #define USE_SERIAL
+#define USE_I2C
+
+/* Select hand configuration */
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+

keyboards/handwired/stef9998/split_5x7/keymaps/default/keymap.c

@@ -0,0 +1,96 @@
+/*
+Copyright 2022 stef9998
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// You can also skip layer-names entirely and just use numbers.
+enum custom_layer {
+    _QWERTY,
+    _FN,
+    _SYM, //symbols & numbers
+    _CFG, //config
+};
+
+enum custom_keycodes {
+    QWERTY = SAFE_RANGE,
+    FN,
+    SYM,
+    CONFIG,
+};
+
+// Shortcut to make keymap more readable
+#define KC_FN MO(_FN)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    QK_GESC ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,KC_NO   ,                          KC_NO   ,KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_BSPC ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    KC_TAB  ,KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T    ,KC_LBRC ,                          KC_RBRC ,KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,KC_BSLS ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    KC_CAPS ,KC_A    ,KC_S    ,KC_D    ,KC_F    ,KC_G    ,KC_EQL  ,                          KC_MINS ,KC_H    ,KC_J    ,KC_K    ,KC_L    ,KC_SCLN ,KC_ENT  ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    KC_LSPO ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,SH_OS   ,                          KC_NO   ,KC_N    ,KC_M    ,KC_COMM ,KC_DOT  ,KC_SLSH ,KC_RSPC ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    KC_LCTL ,KC_LCPO ,KC_LGUI   ,KC_LALT   ,KC_SPC       ,MO(_SYM),                          MO(_SYM),KC_SPC       ,KC_RALT   ,MO(_FN)   ,KC_RCPC ,KC_RCTL
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+
+[_FN] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,KC_DEL ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_EXLM ,KC_AT   ,KC_LCBR ,KC_RCBR ,KC_PIPE ,_______ ,                          _______ ,KC_PGUP ,KC_HOME ,KC_UP   ,KC_END  ,KC_PSCR ,XXXXXXX ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_HASH ,KC_DLR  ,KC_LBRC ,KC_RBRC ,KC_GRV  ,_______ ,                          _______ ,KC_PGDN ,KC_LEFT ,KC_DOWN ,KC_RIGHT,_______ ,KC_QUOT ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_PERC ,KC_CIRC ,KC_LPRN ,KC_RPRN ,KC_TILD ,_______ ,                          _______ ,KC_MSEL ,KC_MPLY ,KC_MPRV ,KC_MNXT ,KC_MPLY ,_______ ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    _______ ,_______ ,_______   ,_______   ,_______      ,_______ ,                          _______ ,_______      ,_______   ,_______   ,_______ ,_______
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+
+[_SYM] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    KC_GRV  ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,KC_F11  ,                          KC_F12  ,KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,KC_DEL ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_EXLM ,KC_AT   ,KC_HASH ,KC_DLR  ,KC_PERC ,_______ ,                          _______ ,KC_CIRC ,KC_AMPR ,KC_ASTR ,KC_LPRN ,KC_RPRN ,XXXXXXX ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,_______ ,                          _______ ,KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_MINS ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_MSEL ,KC_MPLY ,XXXXXXX , KC_MPRV, KC_MNXT,_______ ,                          _______ ,KC_MSEL ,KC_MPLY , KC_MPRV, KC_MNXT,KC_MPLY ,_______ ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    QK_BOOT ,_______ ,_______   ,_______   ,_______      ,TG(_CFG),                          TG(_CFG),_______      ,_______   ,_______   ,_______ ,QK_BOOT
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+
+[_CFG] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    TG(_CFG),_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    _______ ,_______ ,_______   ,_______   ,_______      ,_______ ,                          _______ ,_______      ,_______   ,_______   ,_______ ,_______
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+};

keyboards/handwired/stef9998/split_5x7/keymaps/default/readme.md

@@ -0,0 +1,7 @@
+![Split_5x7 Layout Image](https://i.imgur.com/XnDWlJOh.png)
+
+# Default Layout
+
+This is the default layout.
+For the most part it's a straightforward and easy to follow layout.
+The only thing to note is the apostrophe key which is on the second layer under return.

keyboards/handwired/stef9998/split_5x7/keymaps/stef9998/config.h

@@ -0,0 +1,34 @@
+/*
+Copyright 2022 stef9998
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+//#define USE_SERIAL
+#define USE_I2C
+
+/* Select hand configuration */
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#define LCPO_KEYS KC_LCTL,KC_TRNS,KC_LBRC
+#define RCPC_KEYS KC_RCTL,KC_TRNS,KC_RBRC
+
+#define TAPPING_TERM_PER_KEY
+#define IGNORE_MOD_TAP_INTERRUPT
+#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY

keyboards/handwired/stef9998/split_5x7/keymaps/stef9998/keymap.c

@@ -0,0 +1,188 @@
+/*
+Copyright 2022 stef9998
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+enum custom_layer {
+    _QWERTY,
+    _HOMEMOD,
+    _FN,
+    _SYM, //symbols & numbers
+    _SPARE,
+    _CFG, //config
+};
+
+enum custom_keycodes {
+    QWERTY = SAFE_RANGE,
+    HOMEMOD,
+    FN,
+    SYM,
+    SPARE,
+    CONFIG,
+};
+
+// Shortcut to make keymap more readable
+#define KC_FN MO(_FN)
+
+bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_LSPO:
+            // Do not force the mod-tap key press to be handled as a modifier
+            // if any other key was pressed while the mod-tap key is held down.
+            return false;
+//        case MT(MOD_LSFT,KC_9):
+//            return false;
+        case KC_RSPC:
+            return false;
+        default:
+            // Force the mod-tap key press to be handled as a modifier if any
+            // other key was pressed while the mod-tap key is held down.
+            return true;
+    }
+}
+
+//layer_state_t layer_state_set_user(layer_state_t state) {
+//    return update_tri_layer_state(state, _ESS, _SYM, _SYM_ESS);
+//}
+
+//Modified from default, cause I want CapsLock to still be there even when I swap hands
+const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+{ {0, 5},  {1, 5},  {2, 5},  {3, 5}, {4, 5}, {5, 5}, {6, 5}},
+{ {0, 6},  {1, 6},  {2, 6},  {3, 6}, {4, 6}, {5, 6}, {6, 6}},
+{ {0, 2},  {1, 7},  {2, 7},  {3, 7}, {4, 7}, {5, 7}, {6, 7}}, // caps won't be switched, because of extend
+{ {0, 8},  {1, 8},  {2, 8},  {3, 8}, {4, 8}, {5, 8}, {6, 8}},
+{ {0, 9},  {1, 9},  {2, 9},  {3, 9}, {4, 9}, {5, 9}, {6, 9}},
+
+{ {0, 0},  {1, 0},  {2, 0},  {3, 0}, {4, 0}, {5, 0}, {6, 0}},
+{ {0, 1},  {1, 1},  {2, 1},  {3, 1}, {4, 1}, {5, 1}, {6, 1}},
+{ {0, 2},  {1, 2},  {2, 2},  {3, 2}, {4, 2}, {5, 2}, {6, 2}},
+{ {0, 3},  {1, 3},  {2, 3},  {3, 3}, {4, 3}, {5, 3}, {6, 3}},
+{ {0, 4},  {1, 4},  {2, 4},  {3, 4}, {4, 4}, {5, 4}, {6, 4}},
+};
+
+uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case SH_T(KC_SPC):
+            return TAPPING_TERM + 300;
+        default:
+            return TAPPING_TERM;
+    }
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    QK_GESC ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,KC_NO   ,                          KC_NO   ,KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_BSPC ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    KC_TAB  ,KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T    ,KC_LBRC ,                          KC_RBRC ,KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,KC_BSLS ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    KC_CAPS ,KC_A    ,KC_S    ,KC_D    ,KC_F    ,KC_G    ,KC_EQL  ,                          KC_MINS ,KC_H    ,KC_J    ,KC_K    ,KC_L    ,KC_SCLN ,KC_ENT  ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    KC_LSPO ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,SH_OS   ,                          KC_NO   ,KC_N    ,KC_M    ,KC_COMM ,KC_DOT  ,KC_SLSH ,KC_RSPC ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    KC_LCTL ,KC_LCPO ,KC_LGUI   ,KC_LALT   ,SH_T(KC_SPC) ,MO(_SYM),                          MO(_SYM),KC_SPC       ,KC_RALT   ,MO(_FN)   ,KC_RCPC ,KC_RCTL
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+
+[_HOMEMOD] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+_______ ,_______ ,RALT_T(KC_S),LCTL_T(KC_D),LSFT_T(KC_F),LT(_SYM,KC_G),_______ ,           _______ ,LT(_SYM,KC_H),RSFT_T(KC_J),RCTL_T(KC_K),LALT_T(KC_L),_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    KC_LSFT ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,KC_RSFT ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    _______ ,_______ ,_______   ,_______   ,_______      ,_______ ,                          _______ ,_______      ,_______   ,_______   ,_______ ,_______
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+
+[_FN] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,KC_DEL ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_EXLM ,KC_AT   ,KC_LCBR ,KC_RCBR ,KC_PIPE ,_______ ,                          _______ ,KC_PGUP ,KC_HOME ,KC_UP   ,KC_END  ,KC_PSCR ,XXXXXXX ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_HASH ,KC_DLR  ,KC_LBRC ,KC_RBRC ,KC_GRV  ,_______ ,                          _______ ,KC_PGDN ,KC_LEFT ,KC_DOWN ,KC_RIGHT,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_PERC ,KC_CIRC ,KC_LPRN ,KC_RPRN ,KC_TILD ,_______ ,                          _______ ,KC_MSEL ,KC_MPLY ,KC_MPRV ,KC_MNXT ,KC_MPLY ,_______ ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    _______ ,_______ ,_______   ,_______   ,_______      ,_______ ,                          _______ ,_______      ,_______   ,_______   ,_______ ,_______
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+
+[_SYM] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    KC_GRV  ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,KC_F11  ,                          KC_F12  ,KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,KC_DEL ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_EXLM ,KC_AT   ,KC_HASH ,KC_DLR  ,KC_PERC ,_______ ,                          _______ ,KC_CIRC ,KC_AMPR ,KC_ASTR ,KC_LPRN ,KC_RPRN ,XXXXXXX ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    CAPSWRD ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,_______ ,                          _______ ,KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_QUOT ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,KC_MSEL ,KC_MPLY ,XXXXXXX ,KC_EQL  ,KC_PLUS ,_______ ,                          _______ ,KC_UNDS ,KC_MINS , KC_MPRV, KC_MNXT,KC_MPLY ,_______ ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    QK_BOOT ,_______ ,_______   ,_______   ,_______      ,TG(_CFG),                          TG(_CFG),_______      ,_______   ,_______   ,_______ ,QK_BOOT
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+
+[_CFG] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    TG(_CFG),_______ ,TG(_HOMEMOD),_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,KC_1    ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    _______ ,_______ ,_______   ,_______   ,_______      ,_______ ,                          _______ ,_______      ,_______   ,_______   ,_______ ,_______
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+
+[_SPARE] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    XXXXXXX ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,XXXXXXX ,                          XXXXXXX ,KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,XXXXXXX ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    XXXXXXX ,QK_BOOT ,RGB_M_P ,RGB_TOG ,RGB_MOD ,RGB_HUD ,RGB_HUI ,                          RGB_SAD ,RGB_SAI ,RGB_VAD ,RGB_VAI ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX  ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,                          _______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    XXXXXXX ,XXXXXXX ,XXXXXXX   ,XXXXXXX   ,XXXXXXX      ,XXXXXXX ,                          XXXXXXX ,XXXXXXX      ,XXXXXXX   ,XXXXXXX   ,XXXXXXX ,XXXXXXX
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+)
+};
+
+/*
+[_] = LAYOUT(
+// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                          _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+// ├────────┼────────┼────────┴─┬──────┴───┬────┴────────┼────────┤                         ├────────┼────────┴────┬───┴──────┬─┴────────┼────────┼────────┤
+    _______ ,_______ ,_______   ,_______   ,_______      ,_______ ,                          _______ ,_______      ,_______   ,_______   ,_______ ,_______
+// └────────┴────────┴──────────┴──────────┴─────────────┴────────┘                         └────────┴─────────────┴──────────┴──────────┴────────┴────────┘
+),
+ */

keyboards/handwired/stef9998/split_5x7/keymaps/stef9998/readme.md

@@ -0,0 +1,4 @@
+![Split_5x7 Layout Image](https://i.imgur.com/m9LkQsWh.png)
+
+# The keymap I currently use
+Pretty much a default qwerty on a 60%-ish with some function-layers

keyboards/handwired/stef9998/split_5x7/keymaps/stef9998/rules.mk

@@ -0,0 +1,2 @@
+CAPS_WORD_ENABLE = yes
+SWAP_HANDS_ENABLE = yes

keyboards/handwired/stef9998/split_5x7/readme.md

@@ -0,0 +1,26 @@
+# Split_5x7
+
+![Split_5x7](https://i.imgur.com/fVw8al1h.jpg)
+
+A handwired Split keyboard with the unusual layout of 5x7 on either side.
+
+3d print files will be made available soon. 
+
+* Keyboard Maintainer: [Stefan](https://github.com/stef9998)
+* Hardware Supported: Pro Micro
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/stef9998/split_5x7/rev1:default
+
+Flashing example for left side:
+
+    make handwired/stef9998/split_5x7/rev1:default:avrdude-split-left
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+How to enter the bootloader:
+* **Keycode in layout**: Press the key mapped to `QK_BOOT`.\
+In the default keymap it's accessible by pressing either of the buttons bringing you to layer `_SYM` and then pressing one of the outer Ctrl's.

keyboards/handwired/stef9998/split_5x7/rev1/config.h

@@ -0,0 +1,58 @@
+/*
+Copyright 2022 stef9998
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { B2, B6, B1, B3, F7, F5, F6 }
+
+#define MATRIX_ROW_PINS_RIGHT { B5, B4, E6, D7, C6 }
+#define MATRIX_COL_PINS_RIGHT { F5, F6, F7, B1, B3, B2, B6 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D0
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT

keyboards/handwired/stef9998/split_5x7/rev1/rev1.c

@@ -0,0 +1,17 @@
+/*
+Copyright 2022 stef9998
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "split_5x7.h"

keyboards/handwired/stef9998/split_5x7/rev1/rev1.h

@@ -0,0 +1,40 @@
+/*
+Copyright 2022 stef9998
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "split_5x7.h"
+
+
+#define LAYOUT( \
+  k00, k01, k02, k03, k04, k05, k06,                k07, k08, k09, k10, k11, k12, k13, \
+  k14, k15, k16, k17, k18, k19, k20,                k21, k22, k23, k24, k25, k26, k27, \
+  k28, k29, k30, k31, k32, k33, k34,                k35, k36, k37, k38, k39, k40, k41, \
+  k42, k43, k44, k45, k46, k47, k48,                k49, k50, k51, k52, k53, k54, k55, \
+  k56, k57, k58, k59,      k61, k62,                k63, k64,      k66, k67, k68, k69  \
+) \
+{ \
+    { k00, k01, k02, k03, k04  , k05, k06 }, \
+    { k14, k15, k16, k17, k18  , k19, k20 }, \
+    { k28, k29, k30, k31, k32  , k33, k34 }, \
+    { k42, k43, k44, k45, k46  , k47, k48 }, \
+    { k56, k57, k58, k59, KC_NO, k61, k62 }, \
+    { k13, k12, k11, k10, k09  , k08, k07 }, \
+    { k27, k26, k25, k24, k23  , k22, k21 }, \
+    { k41, k40, k39, k38, k37  , k36, k35 }, \
+    { k55, k54, k53, k52, k51  , k50, k49 }, \
+    { k69, k68, k67, k66, KC_NO, k64, k63 }  \
+}

keyboards/handwired/stef9998/split_5x7/rev1/rules.mk

@@ -0,0 +1,4 @@
+# Disable unsupported hardware
+AUDIO_SUPPORTED = no
+BACKLIGHT_SUPPORTED = no
+RGBLIGHT_SUPPORTED = no

keyboards/handwired/stef9998/split_5x7/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+SPLIT_KEYBOARD = yes
+
+DEFAULT_FOLDER = handwired/stef9998/split_5x7/rev1

keyboards/handwired/stef9998/split_5x7/split_5x7.c

@@ -0,0 +1,33 @@
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "split_5x7.h"
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+{{0, 5},  {1, 5},  {2, 5},  {3, 5}, {4, 5}, {5, 5}, {6, 5}},
+{{0, 6},  {1, 6},  {2, 6},  {3, 6}, {4, 6}, {5, 6}, {6, 6}},
+{{0, 7},  {1, 7},  {2, 7},  {3, 7}, {4, 7}, {5, 7}, {6, 7}},
+{{0, 8},  {1, 8},  {2, 8},  {3, 8}, {4, 8}, {5, 8}, {6, 8}},
+{{0, 9},  {1, 9},  {2, 9},  {3, 9}, {4, 9}, {5, 9}, {6, 9}},
+
+{{0, 0},  {1, 0},  {2, 0},  {3, 0}, {4, 0}, {5, 0}, {6, 0}},
+{{0, 1},  {1, 1},  {2, 1},  {3, 1}, {4, 1}, {5, 1}, {6, 1}},
+{{0, 2},  {1, 2},  {2, 2},  {3, 2}, {4, 2}, {5, 2}, {6, 2}},
+{{0, 3},  {1, 3},  {2, 3},  {3, 3}, {4, 3}, {5, 3}, {6, 3}},
+{{0, 4},  {1, 4},  {2, 4},  {3, 4}, {4, 4}, {5, 4}, {6, 4}},
+};
+#endif

keyboards/handwired/stef9998/split_5x7/split_5x7.h

@@ -1,17 +1,23 @@
-/* Copyright 2022 Kyle McCreery 
- * 
- * This program is free software: you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation, either version 2 of the License, or 
- * (at your option) any later version. 
- * 
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- * 
- * You should have received a copy of the GNU General Public License 
- * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "bde.h"
+#pragma once
+
+#if defined(KEYBOARD_handwired_stef9998_split_5x7_rev1)
+#     include "rev1.h"
+#endif
+
+#include "quantum.h"

keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h

@@ -75,7 +75,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define I2C1_SCL_PAL_MODE 4
 #define I2C1_SDA_PAL_MODE 4
 #define I2C1_CLOCK_SPEED  400000
-#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_16_9
 
 /* encoder config */
 #define ENCODERS_PAD_A \

keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c

@@ -24,7 +24,7 @@ void matrix_scan_sub_kb(void) {
     }
 }
 
-void bootmagic_lite(void) {
+__attribute__((weak)) void bootmagic_lite(void) {
     // We need multiple scans because debouncing can't be turned off.
     matrix_scan();
 #if defined(DEBOUNCE) && DEBOUNCE > 0

keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h

@@ -28,3 +28,9 @@
 #define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 200
 
 #define ENCODER_DEFAULT_POS 0x3
+
+
+#define BOOTMAGIC_LITE_EEPROM_ROW          1
+#define BOOTMAGIC_LITE_EEPROM_COLUMN       0
+#define BOOTMAGIC_LITE_EEPROM_ROW_RIGHT    7
+#define BOOTMAGIC_LITE_EEPROM_COLUMN_RIGHT 5

keyboards/kegen/gboy/config.h

@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2022 Matt Chan
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F1, F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { E2, E6, C6, C7, D7, B6, B5, B4, B3, B2, B1, B0, D4, D6, D5, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 15
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+#define RGB_DI_PIN D1
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/kegen/gboy/gboy.c

@@ -1,17 +1,18 @@
-/* Copyright 2020 Kyle McCreery 
+/*
+ * Copyright (C) 2022 Matt Chan
  * 
- * This program is free software: you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation, either version 2 of the License, or 
- * (at your option) any later version. 
- * 
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- * 
- * You should have received a copy of the GNU General Public License 
- * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  */
 
-#include "bde.h"
+#include "gboy.h"

keyboards/kegen/gboy/gboy.h

@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2022 Matt Chan
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/*
+ * This diagram is based off the QK65 layout but without the blocker.
+ *
+ *              ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐    ┌───────┐
+ *              │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │1D │0D │0E │    │0D     │ 2u Backspace
+ *              ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤    └─┬─────┤
+ *              │10   │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │2C   │1E │      │     │
+ *  2.25u       ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤   ┌──┴┐2D  │ ISO Enter
+ *  LShift      │20    │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D      │2E │   │2C │    │
+ * ┌────────┐   ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ ┌─┴───┴────┤
+ * │30      │   │30  │3C │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B    │3D │3E │ │3B        │ 2.75u Shift
+ * └────────┘   ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┤ └──────────┘
+ *              │40  │41  │42  │46                      │47   │49   │4C │4D │4E │
+ *              └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┘
+ *              1.25u, 1.25u, 1.25u, 6.25u, 1.5u, 1.5u
+ *
+ *              ┌────┬────┬────┬────────────────────────┬───┬───┬───┐
+ *              │40  │41  │42  │46                      │47 │48 │49 │
+ *              └────┴────┴────┴────────────────────────┴───┴───┴───┘
+ *              1.25u, 1.25u, 1.25u, 6.25u, 1u, 1u, 1u
+ *
+ *              ┌─────┬─────┬───────────────────────────┬───┬───┬───┐
+ *              │40   │42   │46                         │47 │48 │49 │
+ *              └─────┴─────┴───────────────────────────┴───┴───┴───┘
+ *              1.5u, 1.5u, 7u, 1u, 1u, 1u
+ *
+ *              ┌─────┬─────┬───────────────────────────┬─────┬─────┐
+ *              │40   │42   │46                         │47   │49   │
+ *              └─────┴─────┴───────────────────────────┴─────┴─────┘
+ *              1.5u, 1.5u, 7u, 1.5u, 1.5u
+ */
+
+
+
+#define LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K115, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
+	K400, K401, K402,                   K406,             K409, K410, K411, K412, K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO, K115 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO, K315 }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, K409,  K410,  K411,  K412,  K413,  K414,  KC_NO }  \
+}

keyboards/kegen/gboy/info.json

@@ -0,0 +1,90 @@
+{
+    "keyboard_name": "Kegen G-Boy", 
+    "url": "", 
+    "maintainer": "@mattchan", 
+    "usb": {
+        "vid": "0x4B65",
+        "pid": "0x6762",
+        "device_version": "0.0.1"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+                {"x":15, "y":0},
+                
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+                {"x":15, "y":1},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2},
+                {"x":13.75, "y":2, "w":1.25},
+                {"x":15, "y":2},
+
+                {"x":0, "y":3, "w":1.25},
+                {"x":1.25, "y":3},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+                {"x":15, "y":3},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4},
+                {"x":11, "y":4},
+                {"x":12, "y":4},
+                {"x":13, "y":4},
+                {"x":14, "y":4},
+                {"x":15, "y":4}]
+        }
+    }
+}

keyboards/kegen/gboy/keymaps/default/keymap.c

@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2022 Matt Chan
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_all(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,  KC_PGDN,
+        KC_LSFT, KC_SLSH, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [1] = LAYOUT_all(
+        KC_GRV,  KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL, QK_BOOT,
+        RGB_TOG, RGB_RMOD, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, RGB_SPD,  RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_TRNS,
+        KC_TRNS, KC_TRNS,  KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT
+    ),
+
+    [2] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [3] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+
+};

keyboards/kegen/gboy/keymaps/via/keymap.c

@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2022 Matt Chan
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_all(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,  KC_PGDN,
+        KC_LSFT, KC_SLSH, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [1] = LAYOUT_all(
+        KC_GRV,  KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL, QK_BOOT,
+        RGB_TOG, RGB_RMOD, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, RGB_SPD,  RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_TRNS,
+        KC_TRNS, KC_TRNS,  KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT
+    ),
+
+    [2] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [3] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+
+};

keyboards/kegen/gboy/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/kegen/gboy/readme.md

@@ -0,0 +1,28 @@
+# G-Boy
+
+![G-Boy](https://i.imgur.com/APwppRwh.png)
+
+65% board that resembles a handheld gaming console
+
+* Keyboard Maintainer: [Matt Chan](https://github.com/mattchan)
+* Hardware Supported: Kegen G-Boy
+* Hardware Availability: Unfortunately, there is no site for this, and the Kegen Discord is ghost town.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kegen/gboy:default
+
+Flashing example for this keyboard:
+
+    make kegen/gboy:default:flash
+
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/kegen/gboy/rules.mk

@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes   # Mouse keys
+EXTRAKEY_ENABLE = yes   # Audio control and System control
+CONSOLE_ENABLE = no	    # Console for debug
+COMMAND_ENABLE = no     # Commands for debug and configuration
+NKRO_ENABLE = yes       # Enable N-Key Rollover
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no       # Audio output
+RGBLIGHT_ENABLE = yes   # Enable keyboard RGB underglow

keyboards/mechwild/bde/bde.h

@@ -1,26 +0,0 @@
-/* Copyright 2022 Kyle McCreery 
- * 
- * This program is free software: you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation, either version 2 of the License, or 
- * (at your option) any later version. 
- * 
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- * 
- * You should have received a copy of the GNU General Public License 
- * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
- */
-#pragma once
-
-#include "quantum.h"
-
-#ifdef KEYBOARD_mechwild_bde_rev2
-    #include "rev2.h"
-#elif KEYBOARD_mechwild_bde_lefty
-    #include "lefty.h"
-#elif KEYBOARD_mechwild_bde_righty
-    #include "righty.h"
-#endif

keyboards/mechwild/bde/config.h

@@ -17,4 +17,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
+#include "config_common.h"
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/mechwild/bde/info.json

@@ -5,13 +5,27 @@
     "usb": {
         "vid": "0x6D77"
     },
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                {"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0},  {"label":"Y", "x":5, "y":0}, {"label":"U", "x":6, "y":0}, {"label":"I", "x":7, "y":0}, {"label":"O", "x":8, "y":0}, {"label":"P", "x":9, "y":0},   {"label":"7", "x":10, "y":0}, {"label":"8", "x":11, "y":0}, {"label":"9", "x":12, "y":0}, {"label":"Mute", "x":13, "y":0},            
-                {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1},  {"label":"H", "x":5, "y":1}, {"label":"J", "x":6, "y":1}, {"label":"K", "x":7, "y":1}, {"label":"L", "x":8, "y":1}, {"label":"ESC", "x":9, "y":1}, {"label":"4", "x":10, "y":1}, {"label":"5", "x":11, "y":1}, {"label":"6", "x":12, "y":1}, {"label":"0", "x":13, "y":1},
-                {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"BS", "x":4, "y":2}, {"label":"", "x":5, "y":2},  {"label":"B", "x":6, "y":2}, {"label":"N", "x":7, "y":2}, {"label":"M", "x":8, "y":2}, {"label":"ENT", "x":9, "y":2}, {"label":"1", "x":10, "y":2}, {"label":"2", "x":11, "y":2}, {"label":"3", "x":12, "y":2}, {"label":"EQL", "x":13, "y":2}
-            ]
-        }
+    "debounce": 5,
+    "build": {
+        "lto": true
+    },
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "debug": false,
+        "extrakey": true,
+        "mousekey": true,
+        "rgblight": true,
+        "nkro": true
+    },
+    "development_board": "promicro",
+    "rgblight": {
+        "sleep": true,
+        "max_brightness": 255
+    },
+    "tapping": {
+        "tap_keycode_delay": 10,
+        "tap_capslock_delay": 10
     }
 }