Reorder paths to (hopefully) trigger a re-tag.

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,36 +0,0 @@
----
-name: Bug report
-about: Create a report to help us improve QMK Firmware.
-title: "[Bug] "
-labels: bug, help wanted
-assignees: ''
-
----
-
-<!-- Provide a general summary of the bug in the title above. -->
-
-<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
-<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
-
-## Describe the Bug
-
-<!-- A clear and concise description of what the bug is. -->
-
-## System Information
-
-**Keyboard:** 
-**Revision (if applicable):** 
-**Operating system:** 
-**`qmk doctor` output:** 
-```
-(Paste output here)
-```
-
-**Any keyboard related software installed?** 
- - [ ] AutoHotKey (Windows)
- - [ ] Karabiner (macOS)
- - [ ] Other:
-
-## Additional Context
-
-<!-- Add any other relevant information about the problem here. -->

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,41 @@
+name: Bug report
+description: Create a report to help us improve QMK Firmware.
+title: "[Bug] "
+labels: ["bug", "help wanted"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Provide a general summary of the bug in the title above.
+  - type: textarea
+    attributes:
+      label: Describe the Bug
+      description: A clear and concise description of what the bug is.
+  - type: input
+    attributes:
+      label: Keyboard Used
+      description: The name of the keyboard from the `make` or `qmk compile`/`qmk flash` commands, eg. `planck/rev6`.
+  - type: input
+    attributes:
+      label: Link to product page (if applicable)
+  - type: input
+    attributes:
+      label: Operating System
+  - type: textarea
+    attributes:
+      label: qmk doctor Output
+      description: Output from running the `qmk doctor` command.
+      render: text
+  - type: checkboxes
+    attributes:
+      label: Is AutoHotKey / Karabiner installed
+      options:
+        - label: AutoHotKey (Windows)
+        - label: Karabiner (macOS)
+  - type: input
+    attributes:
+      label: Other keyboard-related software installed
+  - type: textarea
+    attributes:
+      label: Additional Context
+      description: Add any other relevant information about the problem here.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -1,24 +0,0 @@
----
-name: Feature request
-about: Suggest a new feature or changes to existing features.
-title: "[Feature Request] "
-labels: enhancement, help wanted
-assignees: ''
-
----
-
-<!--- Provide a general summary of the changes you want in the title above. -->
-
-<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
-<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
-
-## Feature Request Type
-
-- [ ] Core functionality
-- [ ] Add-on hardware support (eg. audio, RGB, OLED screen, etc.)
-- [ ] Alteration (enhancement/optimization) of existing feature(s)
-- [ ] New behavior
-
-## Description
-
-<!-- A few sentences describing what it is that you'd like to see in QMK. Additional information (such as links to spec sheets, licensing info, other related issues or PRs, etc) would be helpful. -->

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -0,0 +1,21 @@
+name: Feature request
+description: Suggest a new feature or changes to existing features.
+title: "[Feature Request] "
+labels: ["enhancement", "help wanted"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Provide a general summary of the changes you want in the title above.
+  - type: checkboxes
+    attributes:
+      label: Feature Request Type
+      options:
+        - label: Core functionality
+        - label: Add-on hardware support (eg. audio, RGB, OLED screen, etc.)
+        - label: Alteration (enhancement/optimization) of existing feature(s)
+        - label: New behavior
+  - type: textarea
+    attributes:
+      label: Description
+      description: A few sentences describing what it is that you'd like to see in QMK. Additional information (such as links to spec sheets, licensing info, other related issues or PRs, etc) would be helpful.

.github/ISSUE_TEMPLATE/other_issues.md

@@ -1,14 +0,0 @@
----
-name: Other issues
-about: Anything else that doesn't fall into the above categories.
-title: ''
-labels: help wanted, question
-assignees: ''
-
----
-
-<!--- Provide a general summary of the changes you want in the title above. -->
-
-<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
-
-<!-- Please check https://docs.qmk.fm/#/support for additional resources first. If that doesn't answer your question, choose the bug report template instead, as that may be more appropriate. -->

.github/ISSUE_TEMPLATE/other_issues.yml

@@ -0,0 +1,16 @@
+name: Other issues
+description: Anything else that doesn't fall into the above categories.
+labels: ["help wanted", "question"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Provide a general summary of the changes you want in the title above.
+  - type: markdown
+    attributes:
+      value: |
+        Please check [https://docs.qmk.fm/#/support](https://docs.qmk.fm/#/support) for additional resources first. If that doesn't answer your question, choose the bug report template instead, as that may be more appropriate.
+  - type: textarea
+    attributes:
+      label: Issue Description
+      description: Describe your issue in as much detail as possible.

.github/workflows/api.yml

@@ -4,6 +4,7 @@ on:
   push:
     branches:
     - master
+    - develop
     paths:
     - 'keyboards/**'
     - 'layouts/community/**'
@@ -17,7 +18,7 @@ jobs:
     runs-on: ubuntu-latest
     container: qmkfm/qmk_cli
 
-    # protect against those who develop with their fork on master
+    # protect against those who work in their fork on 'important' branches
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
@@ -26,15 +27,20 @@ jobs:
         fetch-depth: 1
         persist-credentials: false
 
+    - name: Install dependencies
+      run: |
+        pip3 install -r requirements-dev.txt
+
     - name: Generate API Data
-      run: qmk generate-api
+      run: |
+        qmk generate-api
 
     - name: Upload API Data
       uses: jakejarvis/s3-sync-action@master
       with:
         args: --acl public-read --follow-symlinks --delete
       env:
-        AWS_S3_BUCKET: ${{ secrets.API_SPACE_MASTER }}
+        AWS_S3_BUCKET: ${{ github.ref == 'refs/heads/develop' && secrets['API_SPACE_DEVELOP'] || secrets['API_SPACE_MASTER'] }}
         AWS_ACCESS_KEY_ID: ${{ secrets.SPACES_ACCESS_KEY }}
         AWS_SECRET_ACCESS_KEY: ${{ secrets.SPACES_SECRET_KEY }}
         AWS_S3_ENDPOINT: https://nyc3.digitaloceanspaces.com

.github/workflows/auto_tag.yml

@@ -5,12 +5,13 @@ on:
     branches:
     - master
     paths:
-    - quantum/**/*
-    - tmk_core/**/*
+    - builddefs/**/*
     - drivers/**/*
-    - tests/**/*
-    - util/**/*
     - platforms/**/*
+    - quantum/**/*
+    - tests/**/*
+    - tmk_core/**/*
+    - util/**/*
     - Makefile
     - '*.mk'
 
@@ -27,7 +28,7 @@ jobs:
         fetch-depth: 0
 
     - name: Bump version and push tag
-      uses: anothrNick/github-tag-action@1.39.0
+      uses: anothrNick/github-tag-action@1.54.0
       env:
         GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         DEFAULT_BUMP: 'patch'

.github/workflows/develop_api.yml

@@ -1,43 +0,0 @@
-name: Update Develop API Data
-
-on:
-  push:
-    branches:
-    - develop
-    paths:
-    - 'keyboards/**'
-    - 'layouts/community/**'
-    - 'lib/python/**'
-    - 'data/**'
-    - '.github/workflows/develop_api.yml'
-  workflow_dispatch:
-
-jobs:
-  api_data:
-    runs-on: ubuntu-latest
-    container: qmkfm/qmk_cli
-
-    # protect against those who work in their fork on develop
-    if: github.repository == 'qmk/qmk_firmware'
-
-    steps:
-    - uses: actions/checkout@v3
-      with:
-        fetch-depth: 1
-        persist-credentials: false
-
-    - name: Generate API Data
-      run: |
-        python3 -m pip install -r requirements-dev.txt
-        qmk generate-api
-
-    - name: Upload API Data
-      uses: jakejarvis/s3-sync-action@master
-      with:
-        args: --acl public-read --follow-symlinks --delete
-      env:
-        AWS_S3_BUCKET: ${{ secrets.API_SPACE_DEVELOP }}
-        AWS_ACCESS_KEY_ID: ${{ secrets.SPACES_ACCESS_KEY }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.SPACES_SECRET_KEY }}
-        AWS_S3_ENDPOINT: https://nyc3.digitaloceanspaces.com
-        SOURCE_DIR: '.build/api_data'

.github/workflows/docs.yml

@@ -34,7 +34,7 @@ jobs:
         qmk --verbose generate-docs
 
     - name: Deploy
-      uses: JamesIves/github-pages-deploy-action@v4.4.0
+      uses: JamesIves/github-pages-deploy-action@v4.4.1
       with:
         GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         BASE_BRANCH: master

.github/workflows/stale.yml

@@ -12,7 +12,7 @@ jobs:
   stale:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v5
+      - uses: actions/stale@v6
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
 

.gitignore

@@ -53,6 +53,7 @@ quantum/version.h
 build/
 cmake-build-debug
 CMakeLists.txt
+*.pdf
 
 # Let these ones be user specific, since we have so many different configurations
 *.code-workspace
@@ -67,9 +68,20 @@ CMakeLists.txt
 tags
 
 # Ignore image/font files
+*.bmp
+*.wbmp
 *.gif
 *.jpg
+*.jpeg
 *.png
+*.apng
+*.mng
+*.svg
+*.webp
+*.webm
+*.avi
+*.mp4
+*.mpeg
 *.ttf
 *.otf
 

Makefile

@@ -241,7 +241,7 @@ endef
 # if we are going to compile all keyboards, match the rest of the rule
 # for each of them
 define PARSE_ALL_KEYBOARDS
-    $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_KEYBOARD,$(shell util/list_keyboards.sh noci | sort -u)))
+    $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_KEYBOARD,$(shell util/list_keyboards.sh | sort -u)))
 endef
 
 # Prints a list of all known keymaps for the given keyboard
@@ -264,7 +264,7 @@ define PARSE_KEYMAP
     # The rest of the rule is the target
     # Remove the leading ":" from the target, as it acts as a separator
     MAKE_TARGET := $$(patsubst :%,%,$$(RULE))
-    # We need to generate an unique indentifer to append to the COMMANDS list
+    # We need to generate an unique identifier to append to the COMMANDS list
     CURRENT_KB_UNDER := $$(subst /,_,$$(CURRENT_KB))
     COMMAND := COMMAND_KEYBOARD_$$(CURRENT_KB_UNDER)_KEYMAP_$$(CURRENT_KM)
     # If we are compiling a keyboard without a subproject, we want to display just the name

builddefs/bootloader.mk

@@ -1,223 +0,0 @@
-# Copyright 2017 Jack Humbert
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# If it's possible that multiple bootloaders can be used for one project,
-# you can leave this unset, and the correct size will be selected
-# automatically.
-#
-# Sets the bootloader defined in the keyboard's/keymap's rules.mk
-# Current options:
-#
-# AVR:
-#     halfkay      PJRC Teensy
-#     caterina     Pro Micro (Sparkfun/generic)
-#     atmel-dfu    Atmel factory DFU
-#     lufa-dfu     LUFA DFU
-#     qmk-dfu      QMK DFU (LUFA + blinkenlight)
-#     qmk-hid      QMK HID (LUFA + blinkenlight)
-#     bootloadhid  HIDBootFlash compatible (ATmega32A)
-#     usbasploader USBaspLoader (ATmega328P)
-# ARM:
-#     halfkay      PJRC Teensy
-#     kiibohd      Input:Club Kiibohd bootloader (only used on their boards)
-#     stm32duino   STM32Duino (STM32F103x8)
-#     stm32-dfu    STM32 USB DFU in ROM
-#     apm32-dfu    APM32 USB DFU in ROM
-# RISC-V:
-#     gd32v-dfu    GD32V USB DFU in ROM
-#
-# If you need to provide your own implementation, you can set inside `rules.mk`
-# `BOOTLOADER = custom` -- you'll need to provide your own implementations. See
-# the respective file under `platforms/<PLATFORM>/bootloaders/custom.c` to see
-# which functions may be overridden.
-#
-# BOOTLOADER_SIZE can still be defined manually, but it's recommended
-# you add any possible configuration to this list
-
-ifeq ($(strip $(BOOTLOADER)), custom)
-    OPT_DEFS += -DBOOTLOADER_CUSTOM
-    BOOTLOADER_TYPE = custom
-endif
-ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
-    OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
-    OPT_DEFS += -DBOOTLOADER_DFU
-    BOOTLOADER_TYPE = dfu
-
-    ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
-        BOOTLOADER_SIZE = 4096
-    endif
-    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
-        BOOTLOADER_SIZE = 8192
-    endif
-endif
-ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
-    OPT_DEFS += -DBOOTLOADER_LUFA_DFU
-    OPT_DEFS += -DBOOTLOADER_DFU
-    BOOTLOADER_TYPE = dfu
-
-    ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
-        BOOTLOADER_SIZE ?= 4096
-    endif
-    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
-        BOOTLOADER_SIZE ?= 8192
-    endif
-endif
-ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
-    OPT_DEFS += -DBOOTLOADER_QMK_DFU
-    OPT_DEFS += -DBOOTLOADER_DFU
-    BOOTLOADER_TYPE = dfu
-
-    ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
-        BOOTLOADER_SIZE ?= 4096
-    endif
-    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
-        BOOTLOADER_SIZE ?= 8192
-    endif
-endif
-ifeq ($(strip $(BOOTLOADER)), qmk-hid)
-    OPT_DEFS += -DBOOTLOADER_QMK_HID
-    OPT_DEFS += -DBOOTLOADER_HID
-    BOOTLOADER_TYPE = dfu
-
-    BOOTLOADER_SIZE ?= 4096
-endif
-ifeq ($(strip $(BOOTLOADER)), halfkay)
-    OPT_DEFS += -DBOOTLOADER_HALFKAY
-    BOOTLOADER_TYPE = halfkay
-
-    # Teensy 2.0
-    ifeq ($(strip $(MCU)), atmega32u4)
-        BOOTLOADER_SIZE = 512
-    endif
-    # Teensy 2.0++
-    ifeq ($(strip $(MCU)), at90usb1286)
-        BOOTLOADER_SIZE = 1024
-    endif
-    # Teensy LC, 3.0, 3.1/2, 3.5, 3.6
-    ifneq (,$(filter $(MCU_ORIG), MKL26Z64 MK20DX128 MK20DX256 MK64FX512 MK66FX1M0))
-        FIRMWARE_FORMAT = hex
-    endif
-endif
-ifeq ($(strip $(BOOTLOADER)), caterina)
-    OPT_DEFS += -DBOOTLOADER_CATERINA
-    BOOTLOADER_TYPE = caterina
-
-    BOOTLOADER_SIZE = 4096
-endif
-ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID))
-    OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
-    BOOTLOADER_TYPE = bootloadhid
-
-    BOOTLOADER_SIZE = 4096
-endif
-ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp))
-    OPT_DEFS += -DBOOTLOADER_USBASP
-    BOOTLOADER_TYPE = usbasploader
-
-    BOOTLOADER_SIZE = 4096
-endif
-ifeq ($(strip $(BOOTLOADER)), lufa-ms)
-    OPT_DEFS += -DBOOTLOADER_MS
-    BOOTLOADER_TYPE = dfu
-
-    BOOTLOADER_SIZE ?= 8192
-    FIRMWARE_FORMAT = bin
-cpfirmware: lufa_warning
-.INTERMEDIATE: lufa_warning
-lufa_warning: $(FIRMWARE_FORMAT)
-	$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
-	$(info LUFA MASS STORAGE Bootloader selected)
-	$(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!)
-	$(info It is extremely prone to bricking, and is only included to support existing boards.)
-	$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
-endif
-ifdef BOOTLOADER_SIZE
-    OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
-endif
-
-ifeq ($(strip $(BOOTLOADER)), stm32-dfu)
-    OPT_DEFS += -DBOOTLOADER_STM32_DFU
-    BOOTLOADER_TYPE = stm32_dfu
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
-    DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
-endif
-ifeq ($(strip $(BOOTLOADER)), apm32-dfu)
-    OPT_DEFS += -DBOOTLOADER_APM32_DFU
-    BOOTLOADER_TYPE = stm32_dfu
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave
-    DFU_SUFFIX_ARGS ?= -v 314B -p 0106
-endif
-ifeq ($(strip $(BOOTLOADER)), gd32v-dfu)
-    OPT_DEFS += -DBOOTLOADER_GD32V_DFU
-    BOOTLOADER_TYPE = gd32v_dfu
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS ?= -d 28E9:0189 -a 0 -s 0x08000000:leave
-    DFU_SUFFIX_ARGS ?= -v 28E9 -p 0189
-endif
-ifeq ($(strip $(BOOTLOADER)), kiibohd)
-    OPT_DEFS += -DBOOTLOADER_KIIBOHD
-    BOOTLOADER_TYPE = kiibohd
-
-    ifeq ($(strip $(MCU_ORIG)), MK20DX128)
-        MCU_LDSCRIPT = MK20DX128BLDR4
-    endif
-    ifeq ($(strip $(MCU_ORIG)), MK20DX256)
-        MCU_LDSCRIPT = MK20DX256BLDR8
-    endif
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS = -d 1C11:B007
-    DFU_SUFFIX_ARGS = -v 1C11 -p B007
-endif
-ifeq ($(strip $(BOOTLOADER)), stm32duino)
-    OPT_DEFS += -DBOOTLOADER_STM32DUINO
-    MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-    BOARD = STM32_F103_STM32DUINO
-    BOOTLOADER_TYPE = stm32duino
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS = -d 1EAF:0003 -a 2 -R
-    DFU_SUFFIX_ARGS = -v 1EAF -p 0003
-endif
-ifeq ($(strip $(BOOTLOADER)), tinyuf2)
-    OPT_DEFS += -DBOOTLOADER_TINYUF2
-    BOOTLOADER_TYPE = tinyuf2
-    FIRMWARE_FORMAT = uf2
-endif
-ifeq ($(strip $(BOOTLOADER)), rp2040)
-    OPT_DEFS += -DBOOTLOADER_RP2040
-    BOOTLOADER_TYPE = rp2040
-endif
-ifeq ($(strip $(BOOTLOADER)), halfkay)
-    OPT_DEFS += -DBOOTLOADER_HALFKAY
-    BOOTLOADER_TYPE = halfkay
-endif
-ifeq ($(strip $(BOOTLOADER)), md-boot)
-    OPT_DEFS += -DBOOTLOADER_MD_BOOT
-    BOOTLOADER_TYPE = md_boot
-endif
-ifeq ($(strip $(BOOTLOADER)), wb32-dfu)
-    OPT_DEFS += -DBOOTLOADER_WB32_DFU
-    BOOTLOADER_TYPE = wb32_dfu
-endif
-
-ifeq ($(strip $(BOOTLOADER_TYPE)),)
-    $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,No bootloader specified. Please set an appropriate 'BOOTLOADER' in your keyboard's 'rules.mk' file.)
-endif

builddefs/build_full_test.mk

@@ -20,7 +20,7 @@ $(TEST)_SRC := \
 	$(TMK_COMMON_SRC) \
 	$(QUANTUM_SRC) \
 	$(SRC) \
-	tests/test_common/keymap.c \
+	$(QUANTUM_PATH)/keymap_introspection.c \
 	tests/test_common/matrix.c \
 	tests/test_common/test_driver.cpp \
 	tests/test_common/keyboard_report_util.cpp \
@@ -29,7 +29,7 @@ $(TEST)_SRC := \
 	tests/test_common/test_logger.cpp \
 	$(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp))
 
-$(TEST)_DEFS := $(TMK_COMMON_DEFS) $(OPT_DEFS)
+$(TEST)_DEFS := $(TMK_COMMON_DEFS) $(OPT_DEFS) "-DKEYMAP_C=\"keymap.c\""
 
 $(TEST)_CONFIG := $(TEST_PATH)/config.h
 

builddefs/build_keyboard.mk

@@ -124,26 +124,26 @@ include $(BUILDDEFS_PATH)/build_json.mk
 # Pull in keymap level rules.mk
 ifeq ("$(wildcard $(KEYMAP_PATH))", "")
     # Look through the possible keymap folders until we find a matching keymap.c
-    ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-        -include $(MAIN_KEYMAP_PATH_5)/rules.mk
-        KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
-        KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
-    else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-        -include $(MAIN_KEYMAP_PATH_4)/rules.mk
-        KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
-        KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
-    else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-        -include $(MAIN_KEYMAP_PATH_3)/rules.mk
-        KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
-        KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
+    ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
+        -include $(MAIN_KEYMAP_PATH_1)/rules.mk
+        KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
+        KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
     else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
         -include $(MAIN_KEYMAP_PATH_2)/rules.mk
         KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
         KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
-    else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-        -include $(MAIN_KEYMAP_PATH_1)/rules.mk
-        KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
-        KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
+    else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
+        -include $(MAIN_KEYMAP_PATH_3)/rules.mk
+        KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
+        KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
+    else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
+        -include $(MAIN_KEYMAP_PATH_4)/rules.mk
+        KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
+        KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
+    else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
+        -include $(MAIN_KEYMAP_PATH_5)/rules.mk
+        KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
+        KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
     else ifneq ($(LAYOUTS),)
         # If we haven't found a keymap yet fall back to community layouts
         include $(BUILDDEFS_PATH)/build_layout.mk
@@ -162,7 +162,7 @@ ifneq ("$(wildcard $(KEYMAP_JSON))", "")
     -include $(KEYMAP_PATH)/rules.mk
 
     # Load any rules.mk content from keymap.json
-    INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --keymap $(KEYMAP) --output $(KEYMAP_OUTPUT)/src/rules.mk)
+    INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --output $(KEYMAP_OUTPUT)/src/rules.mk $(KEYMAP_JSON))
     include $(INFO_RULES_MK)
 
 # Add rules to generate the keymap files - indentation here is important
@@ -173,7 +173,7 @@ $(KEYMAP_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)
 
 $(KEYMAP_OUTPUT)/src/config.h: $(KEYMAP_JSON)
 	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
-	$(eval CMD=$(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --keymap $(KEYMAP) --output $(KEYMAP_H))
+	$(eval CMD=$(QMK_BIN) generate-config-h --quiet --output $(KEYMAP_H) $(KEYMAP_JSON))
 	@$(BUILD_CMD)
 
 generated-files: $(KEYMAP_OUTPUT)/src/config.h $(KEYMAP_OUTPUT)/src/keymap.c
@@ -236,26 +236,25 @@ endif
 # that the same keymap may be used on multiple keyboards.
 #
 # We grab the most top-level include file that we can. That file should
-# use #ifdef statements to include all the neccesary subfolder includes,
+# use #ifdef statements to include all the necessary subfolder includes,
 # as described here:
 #
 #    https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic
 #
-QMK_KEYBOARD_H = $(KEYBOARD_OUTPUT)/src/default_keyboard.h
 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).h)","")
-    QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h
+    FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).h)","")
-    QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_2).h
+    FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_2).h
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).h)","")
-    QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_3).h
+    FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_3).h
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).h)","")
-    QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_4).h
+    FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_4).h
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).h)","")
-    QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_5).h
+    FOUND_KEYBOARD_H = $(KEYBOARD_FOLDER_5).h
 endif
 
 # Determine and set parameters based on the keyboard's processor family.
@@ -329,7 +328,7 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/info.json)","")
     INFO_JSON_FILES += $(KEYBOARD_PATH_5)/info.json
 endif
 
-CONFIG_H += $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h
+CONFIG_H += $(KEYBOARD_OUTPUT)/src/info_config.h
 KEYBOARD_SRC += $(KEYBOARD_OUTPUT)/src/default_keyboard.c
 
 $(KEYBOARD_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES)
@@ -344,15 +343,10 @@ $(KEYBOARD_OUTPUT)/src/default_keyboard.c: $(INFO_JSON_FILES)
 
 $(KEYBOARD_OUTPUT)/src/default_keyboard.h: $(INFO_JSON_FILES)
 	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
-	$(eval CMD=$(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/default_keyboard.h)
+	$(eval CMD=$(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --include $(FOUND_KEYBOARD_H) --output $(KEYBOARD_OUTPUT)/src/default_keyboard.h)
 	@$(BUILD_CMD)
 
-$(KEYBOARD_OUTPUT)/src/layouts.h: $(INFO_JSON_FILES)
-	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
-	$(eval CMD=$(QMK_BIN) generate-layouts --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/layouts.h)
-	@$(BUILD_CMD)
-
-generated-files: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/default_keyboard.c $(KEYBOARD_OUTPUT)/src/default_keyboard.h $(KEYBOARD_OUTPUT)/src/layouts.h
+generated-files: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/default_keyboard.c $(KEYBOARD_OUTPUT)/src/default_keyboard.h
 
 .INTERMEDIATE : generated-files
 
@@ -374,6 +368,10 @@ endif
 # Disable features that a keyboard doesn't support
 -include $(BUILDDEFS_PATH)/disable_features.mk
 
+ifneq ("$(CONVERTER)","")
+    -include $(CONVERTER)/post_converter.mk
+endif
+
 # Pull in post_rules.mk files from all our subfolders
 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_rules.mk)","")
     include $(KEYBOARD_PATH_1)/post_rules.mk
@@ -428,7 +426,6 @@ include $(BUILDDEFS_PATH)/common_features.mk
 include $(BUILDDEFS_PATH)/generic_features.mk
 include $(TMK_PATH)/protocol.mk
 include $(PLATFORM_PATH)/common.mk
-include $(BUILDDEFS_PATH)/bootloader.mk
 
 SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
 SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
@@ -443,6 +440,7 @@ ifneq ($(REQUIRE_PLATFORM_KEY),)
     endif
 endif
 
+-include $(PLATFORM_PATH)/$(PLATFORM_KEY)/bootloader.mk
 include $(PLATFORM_PATH)/$(PLATFORM_KEY)/platform.mk
 -include $(PLATFORM_PATH)/$(PLATFORM_KEY)/flash.mk
 
@@ -471,7 +469,7 @@ ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
 OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
 $(KEYMAP_OUTPUT)_SRC := $(SRC)
 $(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) \
--DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" \
+-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(KEYBOARD_OUTPUT)/src/default_keyboard.h\" \
 -DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\"
 $(KEYMAP_OUTPUT)_INC :=  $(VPATH) $(EXTRAINCDIRS)
 $(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)

builddefs/build_test.mk

@@ -71,7 +71,7 @@ include $(BUILDDEFS_PATH)/build_full_test.mk
 endif
 
 $(TEST)_SRC += \
-	tests/test_common/main.c \
+	tests/test_common/main.cpp \
 	$(QUANTUM_PATH)/logging/print.c
 
 $(TEST_OBJ)/$(TEST)_SRC := $($(TEST)_SRC)

builddefs/common_features.mk

@@ -64,6 +64,7 @@ ifeq ($(strip $(AUDIO_ENABLE)), yes)
         OPT_DEFS += -DAUDIO_DRIVER_PWM
     endif
     OPT_DEFS += -DAUDIO_ENABLE
+    COMMON_VPATH += $(QUANTUM_PATH)/audio
     MUSIC_ENABLE = yes
     SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
     SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c
@@ -136,6 +137,7 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
         VPATH += $(QUANTUM_DIR)/pointing_device
         SRC += $(QUANTUM_DIR)/pointing_device/pointing_device.c
         SRC += $(QUANTUM_DIR)/pointing_device/pointing_device_drivers.c
+        SRC += $(QUANTUM_DIR)/pointing_device/pointing_device_auto_mouse.c
         ifneq ($(strip $(POINTING_DEVICE_DRIVER)), custom)
             SRC += drivers/sensors/$(strip $(POINTING_DEVICE_DRIVER)).c
             OPT_DEFS += -DPOINTING_DEVICE_DRIVER_$(strip $(shell echo $(POINTING_DEVICE_DRIVER) | tr '[:lower:]' '[:upper:]'))
@@ -175,7 +177,7 @@ ifeq ($(strip $(QUANTUM_PAINTER_ENABLE)), yes)
     include $(QUANTUM_DIR)/painter/rules.mk
 endif
 
-VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi wear_leveling
+VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi wear_leveling legacy_stm32_flash
 EEPROM_DRIVER ?= vendor
 ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
   $(call CATASTROPHIC_ERROR,Invalid EEPROM_DRIVER,EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
@@ -202,6 +204,12 @@ else
     OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_SPI
     QUANTUM_LIB_SRC += spi_master.c
     SRC += eeprom_driver.c eeprom_spi.c
+  else ifeq ($(strip $(EEPROM_DRIVER)), legacy_stm32_flash)
+    # STM32 Emulated EEPROM, backed by MCU flash (soon to be deprecated)
+    OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_FLASH_EMULATED
+    COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/flash
+    COMMON_VPATH += $(DRIVER_PATH)/flash
+    SRC += eeprom_driver.c eeprom_stm32.c flash_stm32.c
   else ifeq ($(strip $(EEPROM_DRIVER)), transient)
     # Transient EEPROM implementation -- no data storage but provides runtime area for it
     OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
@@ -212,25 +220,30 @@ else
     ifeq ($(PLATFORM),AVR)
       # Automatically provided by avr-libc, nothing required
     else ifeq ($(PLATFORM),CHIBIOS)
-      ifneq ($(filter STM32F3xx_% STM32F1xx_% %_STM32F401xC %_STM32F401xE %_STM32F405xG %_STM32F411xE %_STM32F072xB %_STM32F042x6 %_GD32VF103xB %_GD32VF103x8, $(MCU_SERIES)_$(MCU_LDSCRIPT)),)
-        # Emulated EEPROM
-        OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_FLASH_EMULATED
+      ifneq ($(filter %_STM32F072xB %_STM32F042x6, $(MCU_SERIES)_$(MCU_LDSCRIPT)),)
+        # STM32 Emulated EEPROM, backed by MCU flash (soon to be deprecated)
+        OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_LEGACY_EMULATED_FLASH
         COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/flash
         COMMON_VPATH += $(DRIVER_PATH)/flash
-        SRC += eeprom_driver.c eeprom_stm32.c flash_stm32.c
+        SRC += eeprom_driver.c eeprom_legacy_emulated_flash.c legacy_flash_ops.c
+      else ifneq ($(filter $(MCU_SERIES),STM32F1xx STM32F3xx STM32F4xx STM32L4xx STM32G4xx WB32F3G71xx WB32FQ95xx GD32VF103),)
+        # Wear-leveling EEPROM implementation, backed by MCU flash
+        OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_WEAR_LEVELING
+        SRC += eeprom_driver.c eeprom_wear_leveling.c
+        WEAR_LEVELING_DRIVER ?= embedded_flash
       else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),)
         # True EEPROM on STM32L0xx, L1xx
         OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_L0_L1
         SRC += eeprom_driver.c eeprom_stm32_L0_L1.c
       else ifneq ($(filter $(MCU_SERIES),RP2040),)
-		# Wear-leveling EEPROM implementation, backed by RP2040 flash
-		OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_WEAR_LEVELING
-		SRC += eeprom_driver.c eeprom_wear_leveling.c
-        WEAR_LEVELING_DRIVER = rp2040_flash
+        # Wear-leveling EEPROM implementation, backed by RP2040 flash
+        OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_WEAR_LEVELING
+        SRC += eeprom_driver.c eeprom_wear_leveling.c
+        WEAR_LEVELING_DRIVER ?= rp2040_flash
       else ifneq ($(filter $(MCU_SERIES),KL2x K20x),)
         # Teensy EEPROM implementations
-        OPT_DEFS += -DEEPROM_TEENSY
-        SRC += eeprom_teensy.c
+        OPT_DEFS += -DEEPROM_KINETIS_FLEXRAM
+        SRC += eeprom_kinetis_flexram.c
       else
         # Fall back to transient, i.e. non-persistent
         OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
@@ -271,10 +284,10 @@ ifneq ($(strip $(WEAR_LEVELING_DRIVER)),none)
       POST_CONFIG_H += $(DRIVER_PATH)/wear_leveling/wear_leveling_flash_spi_config.h
     else ifeq ($(strip $(WEAR_LEVELING_DRIVER)), rp2040_flash)
       SRC += wear_leveling_rp2040_flash.c
-      POST_CONFIG_H += $(DRIVER_PATH)/wear_leveling/wear_leveling_rp2040_flash_config.h
+      POST_CONFIG_H += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_PATH)/wear_leveling/wear_leveling_rp2040_flash_config.h
     else ifeq ($(strip $(WEAR_LEVELING_DRIVER)), legacy)
       COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/flash
-      SRC += flash_stm32.c wear_leveling_legacy.c
+      SRC += legacy_flash_ops.c wear_leveling_legacy.c
       POST_CONFIG_H += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/wear_leveling/wear_leveling_legacy_config.h
     endif
   endif
@@ -512,12 +525,6 @@ ifeq ($(strip $(RGB_KEYCODES_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/process_keycode/process_rgb.c
 endif
 
-ifeq ($(strip $(PRINTING_ENABLE)), yes)
-    OPT_DEFS += -DPRINTING_ENABLE
-    SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c
-    QUANTUM_LIB_SRC += uart.c
-endif
-
 VARIABLE_TRACE ?= no
 ifneq ($(strip $(VARIABLE_TRACE)),no)
     SRC += $(QUANTUM_DIR)/variable_trace.c
@@ -537,11 +544,7 @@ endif
 VALID_BACKLIGHT_TYPES := pwm timer software custom
 
 BACKLIGHT_ENABLE ?= no
-ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
-    BACKLIGHT_DRIVER ?= software
-else
-    BACKLIGHT_DRIVER ?= pwm
-endif
+BACKLIGHT_DRIVER ?= pwm
 ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     ifeq ($(filter $(BACKLIGHT_DRIVER),$(VALID_BACKLIGHT_TYPES)),)
         $(call CATASTROPHIC_ERROR,Invalid BACKLIGHT_DRIVER,BACKLIGHT_DRIVER="$(BACKLIGHT_DRIVER)" is not a valid backlight type)
@@ -773,8 +776,10 @@ endif
 
 ifeq ($(strip $(UNICODE_COMMON)), yes)
     OPT_DEFS += -DUNICODE_COMMON_ENABLE
+    COMMON_VPATH += $(QUANTUM_DIR)/unicode
     SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c \
-           $(QUANTUM_DIR)/utf8.c
+           $(QUANTUM_DIR)/unicode/unicode.c \
+           $(QUANTUM_DIR)/unicode/utf8.c
 endif
 
 MAGIC_ENABLE ?= yes
@@ -805,31 +810,25 @@ ifeq ($(strip $(PS2_MOUSE_ENABLE)), yes)
     OPT_DEFS += -DMOUSE_ENABLE
 endif
 
-ifeq ($(strip $(PS2_USE_BUSYWAIT)), yes)
-    PS2_ENABLE := yes
-    SRC += ps2_busywait.c
-    SRC += ps2_io.c
-    OPT_DEFS += -DPS2_USE_BUSYWAIT
-endif
-
-ifeq ($(strip $(PS2_USE_INT)), yes)
-    PS2_ENABLE := yes
-    SRC += ps2_interrupt.c
-    SRC += ps2_io.c
-    OPT_DEFS += -DPS2_USE_INT
-endif
-
-ifeq ($(strip $(PS2_USE_USART)), yes)
-    PS2_ENABLE := yes
-    SRC += ps2_usart.c
-    SRC += ps2_io.c
-    OPT_DEFS += -DPS2_USE_USART
-endif
+VALID_PS2_DRIVER_TYPES := busywait interrupt usart vendor
 
+PS2_DRIVER ?= busywait
 ifeq ($(strip $(PS2_ENABLE)), yes)
+    ifeq ($(filter $(PS2_DRIVER),$(VALID_PS2_DRIVER_TYPES)),)
+        $(call CATASTROPHIC_ERROR,Invalid PS2_DRIVER,PS2_DRIVER="$(PS2_DRIVER)" is not a valid PS/2 driver)
+    endif
+
+    OPT_DEFS += -DPS2_DRIVER_$(strip $(shell echo $(PS2_DRIVER) | tr '[:lower:]' '[:upper:]'))
+
     COMMON_VPATH += $(DRIVER_PATH)/ps2
     COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/ps2
     OPT_DEFS += -DPS2_ENABLE
+
+    ifneq ($(strip $(PS2_DRIVER)), vendor)
+        SRC += ps2_io.c
+    endif
+
+    SRC += ps2_$(strip $(PS2_DRIVER)).c
 endif
 
 JOYSTICK_ENABLE ?= no
@@ -885,17 +884,17 @@ ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
     OPT_DEFS += -DBLUETOOTH_ENABLE
     NO_USB_STARTUP_CHECK := yes
     COMMON_VPATH += $(DRIVER_PATH)/bluetooth
-    SRC += outputselect.c
+    SRC += outputselect.c bluetooth.c
 
     ifeq ($(strip $(BLUETOOTH_DRIVER)), BluefruitLE)
-        OPT_DEFS += -DBLUETOOTH_BLUEFRUIT_LE
-        SRC += analog.c
+        OPT_DEFS += -DBLUETOOTH_BLUEFRUIT_LE -DHAL_USE_SPI=TRUE
         SRC += $(DRIVER_PATH)/bluetooth/bluefruit_le.cpp
+        QUANTUM_LIB_SRC += analog.c
         QUANTUM_LIB_SRC += spi_master.c
     endif
 
     ifeq ($(strip $(BLUETOOTH_DRIVER)), RN42)
-        OPT_DEFS += -DBLUETOOTH_RN42
+        OPT_DEFS += -DBLUETOOTH_RN42 -DHAL_USE_SERIAL=TRUE
         SRC += $(DRIVER_PATH)/bluetooth/rn42.c
         QUANTUM_LIB_SRC += uart.c
     endif

builddefs/common_rules.mk

@@ -1,7 +1,7 @@
 # Hey Emacs, this is a -*- makefile -*-
 #----------------------------------------------------------------------------
 
-# Enable vpath seraching for source files only
+# Enable vpath searching for source files only
 # Without this, output files, could be read from the wrong .build directories
 VPATH_SRC := $(VPATH)
 vpath %.c $(VPATH_SRC)
@@ -85,7 +85,7 @@ ifeq ($(strip $(DEBUG_ENABLE)),yes)
 endif
 CXXFLAGS += $(CXXDEFS)
 CXXFLAGS += -O$(OPT)
-# to supress "warning: only initialized variables can be placed into program memory area"
+# to suppress "warning: only initialized variables can be placed into program memory area"
 CXXFLAGS += -w
 CXXFLAGS += -Wall
 CXXFLAGS += -Wundef
@@ -332,6 +332,7 @@ $1/asflags.txt: $1/force
 	echo '$$($1_ASFLAGS)' | cmp -s - $$@ || echo '$$($1_ASFLAGS)' > $$@
 
 $1/compiler.txt: $1/force
+	test -f $$@ || touch $$@
 	$$(CC) --version | cmp -s - $$@ || $$(CC) --version > $$@
 endef
 

builddefs/converters.mk

@@ -29,6 +29,7 @@ ifneq ($(CONVERT_TO),)
 
     # Configure any defaults
     OPT_DEFS += -DCONVERT_TO_$(strip $(shell echo $(CONVERT_TO) | tr '[:lower:]' '[:upper:]'))
+    OPT_DEFS += -DCONVERTER_TARGET=\"$(strip $(CONVERT_TO))\"
     OPT_DEFS += -DCONVERTER_ENABLED
     VPATH += $(CONVERTER)
 

builddefs/disable_features.mk

@@ -14,7 +14,6 @@ FEATURE_NAMES += LCD_BACKLIGHT
 FEATURE_NAMES += LCD
 FEATURE_NAMES += OLED
 FEATURE_NAMES += POINTING_DEVICE
-FEATURE_NAMES += PRINTING
 FEATURE_NAMES += PS2_MOUSE
 FEATURE_NAMES += RGBLIGHT
 FEATURE_NAMES += RGB_MATRIX

builddefs/generic_features.mk

@@ -17,6 +17,7 @@ SPACE_CADET_ENABLE ?= yes
 GRAVE_ESC_ENABLE ?= yes
 
 GENERIC_FEATURES = \
+    AUTOCORRECT \
     CAPS_WORD \
     COMBO \
     COMMAND \

builddefs/mcu_selection.mk

@@ -348,8 +348,6 @@ ifneq ($(findstring STM32F401, $(MCU)),)
   #   or <keyboard_dir>/ld/
   ifeq ($(strip $(BOOTLOADER)), tinyuf2)
     MCU_LDSCRIPT ?= STM32F401xC_tinyuf2
-    EEPROM_DRIVER ?= wear_leveling
-    WEAR_LEVELING_DRIVER ?= legacy
   else
     MCU_LDSCRIPT ?= STM32F401xC
   endif
@@ -369,6 +367,10 @@ ifneq ($(findstring STM32F401, $(MCU)),)
 
   # Bootloader address for STM32 DFU
   STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+
+  # Revert to legacy wear-leveling driver until ChibiOS's EFL driver is fixed with 128kB and 384kB variants.
+  EEPROM_DRIVER ?= wear_leveling
+  WEAR_LEVELING_DRIVER ?= legacy
 endif
 
 ifneq ($(findstring STM32F405, $(MCU)),)
@@ -465,8 +467,6 @@ ifneq ($(findstring STM32F411, $(MCU)),)
   #   or <keyboard_dir>/ld/
   ifeq ($(strip $(BOOTLOADER)), tinyuf2)
     MCU_LDSCRIPT ?= STM32F411xE_tinyuf2
-    EEPROM_DRIVER ?= wear_leveling
-    WEAR_LEVELING_DRIVER ?= legacy
   else
     MCU_LDSCRIPT ?= STM32F411xE
   endif
@@ -520,6 +520,9 @@ ifneq ($(findstring STM32F446, $(MCU)),)
 
   # Bootloader address for STM32 DFU
   STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+
+  # Default as no chibios efl config
+  EEPROM_DRIVER ?= transient
 endif
 
 ifneq ($(findstring STM32G431, $(MCU)),)

builddefs/show_options.mk

@@ -43,7 +43,6 @@ OTHER_OPTION_NAMES = \
   KEY_LOCK_ENABLE \
   KEY_OVERRIDE_ENABLE \
   LEADER_ENABLE \
-  PRINTING_ENABLE \
   STENO_ENABLE \
   STENO_PROTOCOL \
   TAP_DANCE_ENABLE \
@@ -66,7 +65,9 @@ OTHER_OPTION_NAMES = \
   KEYLOGGER_ENABLE \
   LCD_BACKLIGHT_ENABLE \
   MACROS_ENABLED \
+  PS2_ENABLE \
   PS2_MOUSE_ENABLE \
+  PS2_DRIVER \
   RAW_ENABLE \
   SWAP_HANDS_ENABLE \
   RING_BUFFERED_6KRO_REPORT_ENABLE \
@@ -82,7 +83,8 @@ OTHER_OPTION_NAMES = \
   LTO_ENABLE \
   PROGRAMMABLE_BUTTON_ENABLE \
   SECURE_ENABLE \
-  CAPS_WORD_ENABLE
+  CAPS_WORD_ENABLE \
+  AUTOCORRECT_ENABLE
 
 define NAME_ECHO
        @printf "  %-30s = %-16s # %s\\n" "$1" "$($1)" "$(origin $1)"

data/constants/keycodes/keycodes_0.0.1.hjson

@@ -0,0 +1,96 @@
+{
+    "ranges": {
+        "0x0000/0x00FF": {
+            "define": "QK_BASIC"
+        },
+        "0x0100/0x1EFF": {
+            "define": "QK_MODS"
+        },
+        "0x2000/0x1FFF": {
+            "define": "QK_MOD_TAP"
+        },
+        "0x4000/0x0FFF": {
+            "define": "QK_LAYER_TAP"
+        },
+        "0x5000/0x01FF": {
+            "define": "QK_LAYER_MOD"
+        },
+        "0x5200/0x001F": {
+            "define": "QK_TO"
+        },
+        "0x5220/0x001F": {
+            "define": "QK_MOMENTARY"
+        },
+        "0x5240/0x001F": {
+            "define": "QK_DEF_LAYER"
+        },
+        "0x5260/0x001F": {
+            "define": "QK_TOGGLE_LAYER"
+        },
+        "0x5280/0x001F": {
+            "define": "QK_ONE_SHOT_LAYER"
+        },
+        "0x52A0/0x001F": {
+            "define": "QK_ONE_SHOT_MOD"
+        },
+        "0x52C0/0x001F": {
+            "define": "QK_LAYER_TAP_TOGGLE"
+        },
+        // 0x52E0/0x001F - UNUSED
+        // 0x5300/0x02FF - UNUSED
+        "0x5600/0x00FF": {
+            "define": "QK_SWAP_HANDS"
+        },
+        "0x5700/0x00FF": {
+            "define": "QK_TAP_DANCE"
+        },
+        // 0x5800/0x17FF - UNUSED
+        "0x7000/0x00FF": {
+            "define": "QK_MAGIC"
+        },
+        "0x7100/0x00FF": {
+            "define": "QK_MIDI"
+        },
+        "0x7200/0x01FF": {
+            "define": "QK_SEQUENCER"
+        },
+        "0x7400/0x003F": {
+            "define": "QK_JOYSTICK"
+        },
+        "0x7440/0x003F": {
+            "define": "QK_PROGRAMMABLE_BUTTON"
+        },
+        "0x7480/0x003F": {
+            "define": "QK_AUDIO"
+        },
+        "0x74C0/0x003F": {
+            "define": "QK_STENO"
+        },
+        // 0x7500/0x01FF - UNUSED
+        "0x7700/0x007F": {
+            "define": "QK_MACRO"
+        },
+        // 0x7780/0x007F - UNUSED
+        "0x7800/0x00FF": {
+            "define": "QK_LIGHTING"
+        },
+        // 0x7900/0x02FF - UNUSED
+        "0x7C00/0x01FF": {
+            "define": "QK_QUANTUM"
+        },
+        "0x7E00/0x00FF": {
+            "define": "QK_KB"
+        },
+        "0x7F00/0x00FF": {
+            "define": "QK_USER"
+        },
+        "0x8000/0x7FFF": {
+            "define": "QK_UNICODE"
+        }
+    },
+    "keycodes": {
+        "0x7E00": {
+            "key": "SAFE_RANGE"
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_audio.hjson

@@ -0,0 +1,112 @@
+{
+    "keycodes": {
+        "0x7480": {
+            "group": "audio",
+            "key": "QK_AUDIO_ON",
+            "aliases": [
+                "AU_ON"
+            ]
+        },
+        "0x7481": {
+            "group": "audio",
+            "key": "QK_AUDIO_OFF",
+            "aliases": [
+                "AU_OFF"
+            ]
+        },
+        "0x7482": {
+            "group": "audio",
+            "key": "QK_AUDIO_TOGGLE",
+            "aliases": [
+                "AU_TOGG"
+            ]
+        },
+
+        "0x748A": {
+            "group": "audio",
+            "key": "QK_AUDIO_CLICKY_TOGGLE",
+            "aliases": [
+                "CK_TOGG"
+            ]
+        },
+        "0x748B": {
+            "group": "audio",
+            "key": "QK_AUDIO_CLICKY_ON",
+            "aliases": [
+                "CK_ON"
+            ]
+        },
+        "0x748C": {
+            "group": "audio",
+            "key": "QK_AUDIO_CLICKY_OFF",
+            "aliases": [
+                "CK_OFF"
+            ]
+        },
+        "0x748D": {
+            "group": "audio",
+            "key": "QK_AUDIO_CLICKY_UP",
+            "aliases": [
+                "CK_UP"
+            ]
+        },
+        "0x748E": {
+            "group": "audio",
+            "key": "QK_AUDIO_CLICKY_DOWN",
+            "aliases": [
+                "CK_DOWN"
+            ]
+        },
+        "0x748F": {
+            "group": "audio",
+            "key": "QK_AUDIO_CLICKY_RESET",
+            "aliases": [
+                "CK_RST"
+            ]
+        },
+
+        "0x7490": {
+            "group": "audio",
+            "key": "QK_MUSIC_ON",
+            "aliases": [
+                "MU_ON"
+            ]
+        },
+        "0x7491": {
+            "group": "audio",
+            "key": "QK_MUSIC_OFF",
+            "aliases": [
+                "MU_OFF"
+            ]
+        },
+        "0x7492": {
+            "group": "audio",
+            "key": "QK_MUSIC_TOGGLE",
+            "aliases": [
+                "MU_TOGG"
+            ]
+        },
+        "0x7493": {
+            "group": "audio",
+            "key": "QK_MUSIC_MODE_NEXT",
+            "aliases": [
+                "MU_NEXT"
+            ]
+        },
+
+        "0x7494": {
+            "group": "audio",
+            "key": "QK_AUDIO_VOICE_NEXT",
+            "aliases": [
+                "AU_NEXT"
+            ]
+        },
+        "0x7495": {
+            "group": "audio",
+            "key": "QK_AUDIO_VOICE_PREVIOUS",
+            "aliases": [
+                "AU_PREV"
+            ]
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_joystick.hjson

@@ -0,0 +1,228 @@
+{
+    "keycodes": {
+        "0x7400": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_0",
+            "aliases": [
+                "JS_0"
+            ]
+        },
+        "0x7401": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_1",
+            "aliases": [
+                "JS_1"
+            ]
+        },
+        "0x7402": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_2",
+            "aliases": [
+                "JS_2"
+            ]
+        },
+        "0x7403": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_3",
+            "aliases": [
+                "JS_3"
+            ]
+        },
+        "0x7404": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_4",
+            "aliases": [
+                "JS_4"
+            ]
+        },
+        "0x7405": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_5",
+            "aliases": [
+                "JS_5"
+            ]
+        },
+        "0x7406": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_6",
+            "aliases": [
+                "JS_6"
+            ]
+        },
+        "0x7407": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_7",
+            "aliases": [
+                "JS_7"
+            ]
+        },
+        "0x7408": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_8",
+            "aliases": [
+                "JS_8"
+            ]
+        },
+        "0x7409": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_9",
+            "aliases": [
+                "JS_9"
+            ]
+        },
+        "0x740A": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_10",
+            "aliases": [
+                "JS_10"
+            ]
+        },
+        "0x740B": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_11",
+            "aliases": [
+                "JS_11"
+            ]
+        },
+        "0x740C": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_12",
+            "aliases": [
+                "JS_12"
+            ]
+        },
+        "0x740D": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_13",
+            "aliases": [
+                "JS_13"
+            ]
+        },
+        "0x740E": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_14",
+            "aliases": [
+                "JS_14"
+            ]
+        },
+        "0x740F": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_15",
+            "aliases": [
+                "JS_15"
+            ]
+        },
+        "0x7410": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_16",
+            "aliases": [
+                "JS_16"
+            ]
+        },
+        "0x7411": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_17",
+            "aliases": [
+                "JS_17"
+            ]
+        },
+        "0x7412": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_18",
+            "aliases": [
+                "JS_18"
+            ]
+        },
+        "0x7413": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_19",
+            "aliases": [
+                "JS_19"
+            ]
+        },
+        "0x7414": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_20",
+            "aliases": [
+                "JS_20"
+            ]
+        },
+        "0x7415": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_21",
+            "aliases": [
+                "JS_21"
+            ]
+        },
+        "0x7416": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_22",
+            "aliases": [
+                "JS_22"
+            ]
+        },
+        "0x7417": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_23",
+            "aliases": [
+                "JS_23"
+            ]
+        },
+        "0x7418": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_24",
+            "aliases": [
+                "JS_24"
+            ]
+        },
+        "0x7419": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_25",
+            "aliases": [
+                "JS_25"
+            ]
+        },
+        "0x741A": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_26",
+            "aliases": [
+                "JS_26"
+            ]
+        },
+        "0x741B": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_27",
+            "aliases": [
+                "JS_27"
+            ]
+        },
+        "0x741C": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_28",
+            "aliases": [
+                "JS_28"
+            ]
+        },
+        "0x741D": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_29",
+            "aliases": [
+                "JS_29"
+            ]
+        },
+        "0x741E": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_30",
+            "aliases": [
+                "JS_30"
+            ]
+        },
+        "0x741F": {
+            "group": "joystick",
+            "key": "QK_JOYSTICK_BUTTON_31",
+            "aliases": [
+                "JS_31"
+            ]
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_lighting.hjson

@@ -0,0 +1,175 @@
+{
+    "keycodes": {
+        "0x7800": {
+            "group": "backlight",
+            "key": "QK_BACKLIGHT_ON",
+            "aliases": [
+                "BL_ON"
+            ]
+        },
+        "0x7801": {
+            "group": "backlight",
+            "key": "QK_BACKLIGHT_OFF",
+            "aliases": [
+                "BL_OFF"
+            ]
+        },
+        "0x7802": {
+            "group": "backlight",
+            "key": "QK_BACKLIGHT_TOGGLE",
+            "aliases": [
+                "BL_TOGG"
+            ]
+        },
+        "0x7803": {
+            "group": "backlight",
+            "key": "QK_BACKLIGHT_DOWN",
+            "aliases": [
+                "BL_DOWN"
+            ]
+        },
+        "0x7804": {
+            "group": "backlight",
+            "key": "QK_BACKLIGHT_UP",
+            "aliases": [
+                "BL_UP"
+            ]
+        },
+        "0x7805": {
+            "group": "backlight",
+            "key": "QK_BACKLIGHT_STEP",
+            "aliases": [
+                "BL_STEP"
+            ]
+        },
+        "0x7806": {
+            "group": "backlight",
+            "key": "QK_BACKLIGHT_TOGGLE_BREATHING",
+            "aliases": [
+                "BL_BRTG"
+            ]
+        },
+
+        "0x7820": {
+            "group": "rgb",
+            "key": "RGB_TOG"
+        },
+        "0x7821": {
+            "group": "rgb",
+            "key": "RGB_MODE_FORWARD",
+            "aliases": [
+                "RGB_MOD"
+            ]
+        },
+        "0x7822": {
+            "group": "rgb",
+            "key": "RGB_MODE_REVERSE",
+            "aliases": [
+                "RGB_RMOD"
+            ]
+        },
+        "0x7823": {
+            "group": "rgb",
+            "key": "RGB_HUI"
+        },
+        "0x7824": {
+            "group": "rgb",
+            "key": "RGB_HUD"
+        },
+        "0x7825": {
+            "group": "rgb",
+            "key": "RGB_SAI"
+        },
+        "0x7826": {
+            "group": "rgb",
+            "key": "RGB_SAD"
+        },
+        "0x7827": {
+            "group": "rgb",
+            "key": "RGB_VAI"
+        },
+        "0x7828": {
+            "group": "rgb",
+            "key": "RGB_VAD"
+        },
+        "0x7829": {
+            "group": "rgb",
+            "key": "RGB_SPI"
+        },
+        "0x782A": {
+            "group": "rgb",
+            "key": "RGB_SPD"
+        },
+
+        "0x782B": {
+            "group": "rgb",
+            "key": "RGB_MODE_PLAIN",
+            "aliases": [
+                "RGB_M_P"
+            ]
+        },
+        "0x782C": {
+            "group": "rgb",
+            "key": "RGB_MODE_BREATHE",
+            "aliases": [
+                "RGB_M_B"
+            ]
+        },
+        "0x782D": {
+            "group": "rgb",
+            "key": "RGB_MODE_RAINBOW",
+            "aliases": [
+                "RGB_M_R"
+            ]
+        },
+        "0x782E": {
+            "group": "rgb",
+            "key": "RGB_MODE_SWIRL",
+            "aliases": [
+                "RGB_M_SW"
+            ]
+        },
+        "0x782F": {
+            "group": "rgb",
+            "key": "RGB_MODE_SNAKE",
+            "aliases": [
+                "RGB_M_SN"
+            ]
+        },
+        "0x7830": {
+            "group": "rgb",
+            "key": "RGB_MODE_KNIGHT",
+            "aliases": [
+                "RGB_M_K"
+            ]
+        },
+        "0x7831": {
+            "group": "rgb",
+            "key": "RGB_MODE_XMAS",
+            "aliases": [
+                "RGB_M_X"
+            ]
+        },
+        "0x7832": {
+            "group": "rgb",
+            "key": "RGB_MODE_GRADIENT",
+            "aliases": [
+                "RGB_M_G"
+            ]
+        },
+        "0x7833": {
+            "group": "rgb",
+            "key": "RGB_MODE_RGBTEST",
+            "aliases": [
+                "RGB_M_T"
+            ]
+        },
+        "0x7834": {
+            "group": "rgb",
+            "key": "RGB_MODE_TWINKLE",
+            "aliases": [
+                "RGB_M_TW"
+            ]
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_macro.hjson

@@ -0,0 +1,229 @@
+{
+    "keycodes": {
+
+        "0x7700": {
+            "group": "macro",
+            "key": "QK_MACRO_0",
+            "aliases": [
+                "MC_0"
+            ]
+        },
+        "0x7701": {
+            "group": "macro",
+            "key": "QK_MACRO_1",
+            "aliases": [
+                "MC_1"
+            ]
+        },
+        "0x7702": {
+            "group": "macro",
+            "key": "QK_MACRO_2",
+            "aliases": [
+                "MC_2"
+            ]
+        },
+        "0x7703": {
+            "group": "macro",
+            "key": "QK_MACRO_3",
+            "aliases": [
+                "MC_3"
+            ]
+        },
+        "0x7704": {
+            "group": "macro",
+            "key": "QK_MACRO_4",
+            "aliases": [
+                "MC_4"
+            ]
+        },
+        "0x7705": {
+            "group": "macro",
+            "key": "QK_MACRO_5",
+            "aliases": [
+                "MC_5"
+            ]
+        },
+        "0x7706": {
+            "group": "macro",
+            "key": "QK_MACRO_6",
+            "aliases": [
+                "MC_6"
+            ]
+        },
+        "0x7707": {
+            "group": "macro",
+            "key": "QK_MACRO_7",
+            "aliases": [
+                "MC_7"
+            ]
+        },
+        "0x7708": {
+            "group": "macro",
+            "key": "QK_MACRO_8",
+            "aliases": [
+                "MC_8"
+            ]
+        },
+        "0x7709": {
+            "group": "macro",
+            "key": "QK_MACRO_9",
+            "aliases": [
+                "MC_9"
+            ]
+        },
+        "0x770A": {
+            "group": "macro",
+            "key": "QK_MACRO_10",
+            "aliases": [
+                "MC_10"
+            ]
+        },
+        "0x770B": {
+            "group": "macro",
+            "key": "QK_MACRO_11",
+            "aliases": [
+                "MC_11"
+            ]
+        },
+        "0x770C": {
+            "group": "macro",
+            "key": "QK_MACRO_12",
+            "aliases": [
+                "MC_12"
+            ]
+        },
+        "0x770D": {
+            "group": "macro",
+            "key": "QK_MACRO_13",
+            "aliases": [
+                "MC_13"
+            ]
+        },
+        "0x770E": {
+            "group": "macro",
+            "key": "QK_MACRO_14",
+            "aliases": [
+                "MC_14"
+            ]
+        },
+        "0x770F": {
+            "group": "macro",
+            "key": "QK_MACRO_15",
+            "aliases": [
+                "MC_15"
+            ]
+        },
+        "0x7710": {
+            "group": "macro",
+            "key": "QK_MACRO_16",
+            "aliases": [
+                "MC_16"
+            ]
+        },
+        "0x7711": {
+            "group": "macro",
+            "key": "QK_MACRO_17",
+            "aliases": [
+                "MC_17"
+            ]
+        },
+        "0x7712": {
+            "group": "macro",
+            "key": "QK_MACRO_18",
+            "aliases": [
+                "MC_18"
+            ]
+        },
+        "0x7713": {
+            "group": "macro",
+            "key": "QK_MACRO_19",
+            "aliases": [
+                "MC_19"
+            ]
+        },
+        "0x7714": {
+            "group": "macro",
+            "key": "QK_MACRO_20",
+            "aliases": [
+                "MC_20"
+            ]
+        },
+        "0x7715": {
+            "group": "macro",
+            "key": "QK_MACRO_21",
+            "aliases": [
+                "MC_21"
+            ]
+        },
+        "0x7716": {
+            "group": "macro",
+            "key": "QK_MACRO_22",
+            "aliases": [
+                "MC_22"
+            ]
+        },
+        "0x7717": {
+            "group": "macro",
+            "key": "QK_MACRO_23",
+            "aliases": [
+                "MC_23"
+            ]
+        },
+        "0x7718": {
+            "group": "macro",
+            "key": "QK_MACRO_24",
+            "aliases": [
+                "MC_24"
+            ]
+        },
+        "0x7719": {
+            "group": "macro",
+            "key": "QK_MACRO_25",
+            "aliases": [
+                "MC_25"
+            ]
+        },
+        "0x771A": {
+            "group": "macro",
+            "key": "QK_MACRO_26",
+            "aliases": [
+                "MC_26"
+            ]
+        },
+        "0x771B": {
+            "group": "macro",
+            "key": "QK_MACRO_27",
+            "aliases": [
+                "MC_27"
+            ]
+        },
+        "0x771C": {
+            "group": "macro",
+            "key": "QK_MACRO_28",
+            "aliases": [
+                "MC_28"
+            ]
+        },
+        "0x771D": {
+            "group": "macro",
+            "key": "QK_MACRO_29",
+            "aliases": [
+                "MC_29"
+            ]
+        },
+        "0x771E": {
+            "group": "macro",
+            "key": "QK_MACRO_30",
+            "aliases": [
+                "MC_30"
+            ]
+        },
+        "0x771F": {
+            "group": "macro",
+            "key": "QK_MACRO_31",
+            "aliases": [
+                "MC_31"
+            ]
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_magic.hjson

@@ -0,0 +1,249 @@
+{
+    "keycodes": {
+        "0x7000": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_CONTROL_CAPSLOCK",
+            "aliases": [
+                "CL_SWAP"
+            ]
+        },
+        "0x7001": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_CONTROL_CAPSLOCK",
+            "aliases": [
+                "CL_NORM"
+            ]
+        },
+        "0x7002": {
+            "group": "magic",
+            "key": "MAGIC_TOGGLE_CONTROL_CAPSLOCK",
+            "aliases": [
+                "CL_TOGG"
+            ]
+        },
+        "0x7003": {
+            "group": "magic",
+            "key": "MAGIC_UNCAPSLOCK_TO_CONTROL",
+            "aliases": [
+                "CL_CAPS"
+            ]
+        },
+        "0x7004": {
+            "group": "magic",
+            "key": "MAGIC_CAPSLOCK_TO_CONTROL",
+            "aliases": [
+                "CL_CTRL"
+            ]
+        },
+        "0x7005": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_LALT_LGUI",
+            "aliases": [
+                "LAG_SWP"
+            ]
+        },
+        "0x7006": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_LALT_LGUI",
+            "aliases": [
+                "LAG_NRM"
+            ]
+        },
+        "0x7007": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_RALT_RGUI",
+            "aliases": [
+                "RAG_SWP"
+            ]
+        },
+        "0x7008": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_RALT_RGUI",
+            "aliases": [
+                "RAG_NRM"
+            ]
+        },
+        "0x7009": {
+            "group": "magic",
+            "key": "MAGIC_UNNO_GUI",
+            "aliases": [
+                "GUI_ON"
+            ]
+        },
+        "0x700A": {
+            "group": "magic",
+            "key": "MAGIC_NO_GUI",
+            "aliases": [
+                "GUI_OFF"
+            ]
+        },
+        "0x700B": {
+            "group": "magic",
+            "key": "MAGIC_TOGGLE_GUI",
+            "aliases": [
+                "GUI_TOG"
+            ]
+        },
+        "0x700C": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_GRAVE_ESC",
+            "aliases": [
+                "GE_SWAP"
+            ]
+        },
+        "0x700D": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_GRAVE_ESC",
+            "aliases": [
+                "GE_NORM"
+            ]
+        },
+        "0x700E": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_BACKSLASH_BACKSPACE",
+            "aliases": [
+                "BS_SWAP"
+            ]
+        },
+        "0x700F": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_BACKSLASH_BACKSPACE",
+            "aliases": [
+                "BS_NORM"
+            ]
+        },
+        "0x7010": {
+            "group": "magic",
+            "key": "MAGIC_TOGGLE_BACKSLASH_BACKSPACE",
+            "aliases": [
+                "BS_TOGG"
+            ]
+        },
+        "0x7011": {
+            "group": "magic",
+            "key": "MAGIC_HOST_NKRO",
+            "aliases": [
+                "NK_ON"
+            ]
+        },
+        "0x7012": {
+            "group": "magic",
+            "key": "MAGIC_UNHOST_NKRO",
+            "aliases": [
+                "NK_OFF"
+            ]
+        },
+        "0x7013": {
+            "group": "magic",
+            "key": "MAGIC_TOGGLE_NKRO",
+            "aliases": [
+                "NK_TOGG"
+            ]
+        },
+        "0x7014": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_ALT_GUI",
+            "aliases": [
+                "AG_SWAP"
+            ]
+        },
+        "0x7015": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_ALT_GUI",
+            "aliases": [
+                "AG_NORM"
+            ]
+        },
+        "0x7016": {
+            "group": "magic",
+            "key": "MAGIC_TOGGLE_ALT_GUI",
+            "aliases": [
+                "AG_TOGG"
+            ]
+        },
+        "0x7017": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_LCTL_LGUI",
+            "aliases": [
+                "LCG_SWP"
+            ]
+        },
+        "0x7018": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_LCTL_LGUI",
+            "aliases": [
+                "LCG_NRM"
+            ]
+        },
+        "0x7019": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_RCTL_RGUI",
+            "aliases": [
+                "RCG_SWP"
+            ]
+        },
+        "0x701A": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_RCTL_RGUI",
+            "aliases": [
+                "RCG_NRM"
+            ]
+        },
+        "0x701B": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_CTL_GUI",
+            "aliases": [
+                "CG_SWAP"
+            ]
+        },
+        "0x701C": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_CTL_GUI",
+            "aliases": [
+                "CG_NORM"
+            ]
+        },
+        "0x701D": {
+            "group": "magic",
+            "key": "MAGIC_TOGGLE_CTL_GUI",
+            "aliases": [
+                "CG_TOGG"
+            ]
+        },
+        "0x701E": {
+            "group": "magic",
+            "key": "MAGIC_EE_HANDS_LEFT",
+            "aliases": [
+                "EH_LEFT"
+            ]
+        },
+        "0x701F": {
+            "group": "magic",
+            "key": "MAGIC_EE_HANDS_RIGHT",
+            "aliases": [
+                "EH_RGHT"
+            ]
+        },
+        "0x7020": {
+            "group": "magic",
+            "key": "MAGIC_SWAP_ESCAPE_CAPSLOCK",
+            "aliases": [
+                "EC_SWAP"
+            ]
+        },
+        "0x7021": {
+            "group": "magic",
+            "key": "MAGIC_UNSWAP_ESCAPE_CAPSLOCK",
+            "aliases": [
+                "EC_NORM"
+            ]
+        },
+        "0x7022": {
+            "group": "magic",
+            "key": "MAGIC_TOGGLE_ESCAPE_CAPSLOCK",
+            "aliases": [
+                "EC_TOGG"
+            ]
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_programmable_button.hjson

@@ -0,0 +1,228 @@
+{
+    "keycodes": {
+        "0x7440": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_1",
+            "aliases": [
+                "PB_1"
+            ]
+        },
+        "0x7441": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_2",
+            "aliases": [
+                "PB_2"
+            ]
+        },
+        "0x7442": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_3",
+            "aliases": [
+                "PB_3"
+            ]
+        },
+        "0x7443": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_4",
+            "aliases": [
+                "PB_4"
+            ]
+        },
+        "0x7444": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_5",
+            "aliases": [
+                "PB_5"
+            ]
+        },
+        "0x7445": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_6",
+            "aliases": [
+                "PB_6"
+            ]
+        },
+        "0x7446": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_7",
+            "aliases": [
+                "PB_7"
+            ]
+        },
+        "0x7447": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_8",
+            "aliases": [
+                "PB_8"
+            ]
+        },
+        "0x7448": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_9",
+            "aliases": [
+                "PB_9"
+            ]
+        },
+        "0x7449": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_10",
+            "aliases": [
+                "PB_10"
+            ]
+        },
+        "0x744A": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_11",
+            "aliases": [
+                "PB_11"
+            ]
+        },
+        "0x744B": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_12",
+            "aliases": [
+                "PB_12"
+            ]
+        },
+        "0x744C": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_13",
+            "aliases": [
+                "PB_13"
+            ]
+        },
+        "0x744D": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_14",
+            "aliases": [
+                "PB_14"
+            ]
+        },
+        "0x744E": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_15",
+            "aliases": [
+                "PB_15"
+            ]
+        },
+        "0x744F": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_16",
+            "aliases": [
+                "PB_16"
+            ]
+        },
+        "0x7450": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_17",
+            "aliases": [
+                "PB_17"
+            ]
+        },
+        "0x7451": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_18",
+            "aliases": [
+                "PB_18"
+            ]
+        },
+        "0x7452": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_19",
+            "aliases": [
+                "PB_19"
+            ]
+        },
+        "0x7453": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_20",
+            "aliases": [
+                "PB_20"
+            ]
+        },
+        "0x7454": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_21",
+            "aliases": [
+                "PB_21"
+            ]
+        },
+        "0x7455": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_22",
+            "aliases": [
+                "PB_22"
+            ]
+        },
+        "0x7456": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_23",
+            "aliases": [
+                "PB_23"
+            ]
+        },
+        "0x7457": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_24",
+            "aliases": [
+                "PB_24"
+            ]
+        },
+        "0x7458": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_25",
+            "aliases": [
+                "PB_25"
+            ]
+        },
+        "0x7459": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_26",
+            "aliases": [
+                "PB_26"
+            ]
+        },
+        "0x745A": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_27",
+            "aliases": [
+                "PB_27"
+            ]
+        },
+        "0x745B": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_28",
+            "aliases": [
+                "PB_28"
+            ]
+        },
+        "0x745C": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_29",
+            "aliases": [
+                "PB_29"
+            ]
+        },
+        "0x745D": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_30",
+            "aliases": [
+                "PB_30"
+            ]
+        },
+        "0x745E": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_31",
+            "aliases": [
+                "PB_31"
+            ]
+        },
+        "0x745F": {
+            "group": "programmable_button",
+            "key": "QK_PROGRAMMABLE_BUTTON_32",
+            "aliases": [
+                "PB_32"
+            ]
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_quantum.hjson

@@ -0,0 +1,512 @@
+{
+    "keycodes": {
+        "0x7C00": {
+            "group": "quantum",
+            "key": "QK_BOOTLOADER",
+            "aliases": [
+                "QK_BOOT"
+            ]
+        },
+        "0x7C01": {
+            "group": "quantum",
+            "key": "QK_REBOOT",
+            "aliases": [
+                "QK_RBT"
+            ]
+        },
+        "0x7C02": {
+            "group": "quantum",
+            "key": "QK_DEBUG_TOGGLE",
+            "aliases": [
+                "DB_TOGG"
+            ]
+        },
+        "0x7C03": {
+            "group": "quantum",
+            "key": "QK_CLEAR_EEPROM",
+            "aliases": [
+                "EE_CLR"
+            ]
+        },
+        "0x7C04": {
+            "group": "quantum",
+            "key": "QK_MAKE"
+        },
+
+        "0x7C10": {
+            "group": "quantum",
+            "key": "QK_AUTO_SHIFT_DOWN",
+            "aliases": [
+                "AS_DOWN"
+            ]
+        },
+        "0x7C11": {
+            "group": "quantum",
+            "key": "QK_AUTO_SHIFT_UP",
+            "aliases": [
+                "AS_UP"
+            ]
+        },
+        "0x7C12": {
+            "group": "quantum",
+            "key": "QK_AUTO_SHIFT_REPORT",
+            "aliases": [
+                "AS_RPT"
+            ]
+        },
+        "0x7C13": {
+            "group": "quantum",
+            "key": "QK_AUTO_SHIFT_ON",
+            "aliases": [
+                "AS_ON"
+            ]
+        },
+        "0x7C14": {
+            "group": "quantum",
+            "key": "QK_AUTO_SHIFT_OFF",
+            "aliases": [
+                "AS_OFF"
+            ]
+        },
+        "0x7C15": {
+            "group": "quantum",
+            "key": "QK_AUTO_SHIFT_TOGGLE",
+            "aliases": [
+                "AS_TOGG"
+            ]
+        },
+
+        "0x7C16": {
+            "group": "quantum",
+            "key": "QK_GRAVE_ESCAPE",
+            "aliases": [
+                "QK_GESC"
+            ]
+        },
+
+        "0x7C17": {
+            "group": "quantum",
+            "key": "QK_VELOCIKEY_TOGGLE",
+            "aliases": [
+                "VK_TOGG"
+            ]
+        },
+
+        "0x7C18": {
+            "group": "quantum",
+            "key": "QK_SPACE_CADET_LEFT_CTRL_PARENTHESIS_OPEN",
+            "aliases": [
+                "SC_LCPO"
+            ]
+        },
+        "0x7C19": {
+            "group": "quantum",
+            "key": "QK_SPACE_CADET_RIGHT_CTRL_PARENTHESIS_CLOSE",
+            "aliases": [
+                "SC_RCPC"
+            ]
+        },
+        "0x7C1A": {
+            "group": "quantum",
+            "key": "QK_SPACE_CADET_LEFT_SHIFT_PARENTHESIS_OPEN",
+            "aliases": [
+                "SC_LSPO"
+            ]
+        },
+        "0x7C1B": {
+            "group": "quantum",
+            "key": "QK_SPACE_CADET_RIGHT_SHIFT_PARENTHESIS_CLOSE",
+            "aliases": [
+                "SC_RSPC"
+            ]
+        },
+        "0x7C1C": {
+            "group": "quantum",
+            "key": "QK_SPACE_CADET_LEFT_ALT_PARENTHESIS_OPEN",
+            "aliases": [
+                "SC_LAPO"
+            ]
+        },
+        "0x7C1D": {
+            "group": "quantum",
+            "key": "QK_SPACE_CADET_RIGHT_ALT_PARENTHESIS_CLOSE",
+            "aliases": [
+                "SC_RAPC"
+            ]
+        },
+        "0x7C1E": {
+            "group": "quantum",
+            "key": "QK_SPACE_CADET_RIGHT_SHIFT_ENTER",
+            "aliases": [
+                "SC_SENT"
+            ]
+        },
+
+        "0x7C20": {
+            "group": "quantum",
+            "key": "QK_OUTPUT_AUTO",
+            "aliases": [
+                "OU_AUTO"
+            ]
+        },
+        "0x7C21": {
+            "group": "quantum",
+            "key": "QK_OUTPUT_USB",
+            "aliases": [
+                "OU_USB"
+            ]
+        },
+        "0x7C22": {
+            "group": "quantum",
+            "key": "QK_OUTPUT_BLUETOOTH",
+            "aliases": [
+                "OU_BT"
+            ]
+        },
+
+        "0x7C30": {
+            "group": "quantum",
+            "key": "QK_UNICODE_MODE_NEXT",
+            "aliases": [
+                "UC_NEXT"
+            ]
+        },
+        "0x7C31": {
+            "group": "quantum",
+            "key": "QK_UNICODE_MODE_PREVIOUS",
+            "aliases": [
+                "UC_PREV"
+            ]
+        },
+        "0x7C32": {
+            "group": "quantum",
+            "key": "QK_UNICODE_MODE_MACOS",
+            "aliases": [
+                "UC_MAC"
+            ]
+        },
+        "0x7C33": {
+            "group": "quantum",
+            "key": "QK_UNICODE_MODE_LINUX",
+            "aliases": [
+                "UC_LINX"
+            ]
+        },
+        "0x7C34": {
+            "group": "quantum",
+            "key": "QK_UNICODE_MODE_WINDOWS",
+            "aliases": [
+                "UC_WIN"
+            ]
+        },
+        "0x7C35": {
+            "group": "quantum",
+            "key": "QK_UNICODE_MODE_BSD",
+            "aliases": [
+                "UC_BSD"
+            ]
+        },
+        "0x7C36": {
+            "group": "quantum",
+            "key": "QK_UNICODE_MODE_WINCOMPOSE",
+            "aliases": [
+                "UC_WINC"
+            ]
+        },
+        "0x7C37": {
+            "group": "quantum",
+            "key": "QK_UNICODE_MODE_EMACS",
+            "aliases": [
+                "UC_EMAC"
+            ]
+        },
+
+        "0x7C40": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_ON",
+            "aliases": [
+                "HF_ON"
+            ]
+        },
+        "0x7C41": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_OFF",
+            "aliases": [
+                "HF_OFF"
+            ]
+        },
+        "0x7C42": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_TOGGLE",
+            "aliases": [
+                "HF_TOGG"
+            ]
+        },
+        "0x7C43": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_RESET",
+            "aliases": [
+                "HF_RST"
+            ]
+        },
+        "0x7C44": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_FEEDBACK_TOGGLE",
+            "aliases": [
+                "HF_FDBK"
+            ]
+        },
+        "0x7C45": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_BUZZ_TOGGLE",
+            "aliases": [
+                "HF_BUZZ"
+            ]
+        },
+        "0x7C46": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_MODE_NEXT",
+            "aliases": [
+                "HF_NEXT"
+            ]
+        },
+        "0x7C47": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_MODE_PREVIOUS",
+            "aliases": [
+                "HF_PREV"
+            ]
+        },
+        "0x7C48": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_CONTINUOUS_TOGGLE",
+            "aliases": [
+                "HF_CONT"
+            ]
+        },
+        "0x7C49": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_CONTINUOUS_UP",
+            "aliases": [
+                "HF_CONU"
+            ]
+        },
+        "0x7C4A": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_CONTINUOUS_DOWN",
+            "aliases": [
+                "HF_COND"
+            ]
+        },
+        "0x7C4B": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_DWELL_UP",
+            "aliases": [
+                "HF_DWLU"
+            ]
+        },
+        "0x7C4C": {
+            "group": "quantum",
+            "key": "QK_HAPTIC_DWELL_DOWN",
+            "aliases": [
+                "HF_DWLD"
+            ]
+        },
+
+        "0x7C50": {
+            "group": "quantum",
+            "key": "QK_COMBO_ON",
+            "aliases": [
+                "CM_ON"
+            ]
+        },
+        "0x7C51": {
+            "group": "quantum",
+            "key": "QK_COMBO_OFF",
+            "aliases": [
+                "CM_OFF"
+            ]
+        },
+        "0x7C52": {
+            "group": "quantum",
+            "key": "QK_COMBO_TOGGLE",
+            "aliases": [
+                "CM_TOGG"
+            ]
+        },
+
+        "0x7C53": {
+            "group": "quantum",
+            "key": "QK_DYNAMIC_MACRO_RECORD_START_1",
+            "aliases": [
+                "DM_REC1"
+            ]
+        },
+        "0x7C54": {
+            "group": "quantum",
+            "key": "QK_DYNAMIC_MACRO_RECORD_START_2",
+            "aliases": [
+                "DM_REC2"
+            ]
+        },
+        "0x7C55": {
+            "group": "quantum",
+            "key": "QK_DYNAMIC_MACRO_RECORD_STOP",
+            "aliases": [
+                "DM_RSTP"
+            ]
+        },
+        "0x7C56": {
+            "group": "quantum",
+            "key": "QK_DYNAMIC_MACRO_PLAY_1",
+            "aliases": [
+                "DM_PLY1"
+            ]
+        },
+        "0x7C57": {
+            "group": "quantum",
+            "key": "QK_DYNAMIC_MACRO_PLAY_2",
+            "aliases": [
+                "DM_PLY2"
+            ]
+        },
+
+        "0x7C58": {
+            "group": "quantum",
+            "key": "QK_LEADER",
+            "aliases": [
+                "QK_LEAD"
+            ]
+        },
+
+        "0x7C59": {
+            "group": "quantum",
+            "key": "QK_LOCK"
+        },
+
+        "0x7C5A": {
+            "group": "quantum",
+            "key": "QK_ONE_SHOT_ON",
+            "aliases": [
+                "OS_ON"
+            ]
+        },
+        "0x7C5B": {
+            "group": "quantum",
+            "key": "QK_ONE_SHOT_OFF",
+            "aliases": [
+                "OS_OFF"
+            ]
+        },
+        "0x7C5C": {
+            "group": "quantum",
+            "key": "QK_ONE_SHOT_TOGGLE",
+            "aliases": [
+                "OS_TOGG"
+            ]
+        },
+
+        "0x7C5D": {
+            "group": "quantum",
+            "key": "QK_KEY_OVERRIDE_TOGGLE",
+            "aliases": [
+                "KO_TOGG"
+            ]
+        },
+        "0x7C5E": {
+            "group": "quantum",
+            "key": "QK_KEY_OVERRIDE_ON",
+            "aliases": [
+                "KO_ON"
+            ]
+        },
+        "0x7C5F": {
+            "group": "quantum",
+            "key": "QK_KEY_OVERRIDE_OFF",
+            "aliases": [
+                "KO_OFF"
+            ]
+        },
+
+        "0x7C60": {
+            "group": "quantum",
+            "key": "QK_SECURE_LOCK",
+            "aliases": [
+                "SE_LOCK"
+            ]
+        },
+        "0x7C61": {
+            "group": "quantum",
+            "key": "QK_SECURE_UNLOCK",
+            "aliases": [
+                "SE_UNLK"
+            ]
+        },
+        "0x7C62": {
+            "group": "quantum",
+            "key": "QK_SECURE_TOGGLE",
+            "aliases": [
+                "SE_TOGG"
+            ]
+        },
+        "0x7C63": {
+            "group": "quantum",
+            "key": "QK_SECURE_REQUEST",
+            "aliases": [
+                "SE_REQ"
+            ]
+        },
+
+        "0x7C70": {
+            "group": "quantum",
+            "key": "QK_DYNAMIC_TAPPING_TERM_PRINT",
+            "aliases": [
+                "DT_PRNT"
+            ]
+        },
+        "0x7C71": {
+            "group": "quantum",
+            "key": "QK_DYNAMIC_TAPPING_TERM_UP",
+            "aliases": [
+                "DT_UP"
+            ]
+        },
+        "0x7C72": {
+            "group": "quantum",
+            "key": "QK_DYNAMIC_TAPPING_TERM_DOWN",
+            "aliases": [
+                "DT_DOWN"
+            ]
+        },
+
+        "0x7C73": {
+            "group": "quantum",
+            "key": "QK_CAPS_WORD_TOGGLE",
+            "aliases": [
+                "CW_TOGG"
+            ]
+        },
+
+        "0x7C74": {
+            "group": "quantum",
+            "key": "QK_AUTOCORRECT_ON",
+            "aliases": [
+                "AC_ON"
+            ]
+        },
+        "0x7C75": {
+            "group": "quantum",
+            "key": "QK_AUTOCORRECT_OFF",
+            "aliases": [
+                "AC_OFF"
+            ]
+        },
+        "0x7C76": {
+            "group": "quantum",
+            "key": "QK_AUTOCORRECT_TOGGLE",
+            "aliases": [
+                "AC_TOGG"
+            ]
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_sequencer.hjson

@@ -0,0 +1,40 @@
+{
+    "keycodes": {
+        "0x7200": {
+            "group": "sequencer",
+            "key": "SQ_ON"
+        },
+        "0x7201": {
+            "group": "sequencer",
+            "key": "SQ_OFF"
+        },
+        "0x7202": {
+            "group": "sequencer",
+            "key": "SQ_TOG"
+        },
+        "0x7203": {
+            "group": "sequencer",
+            "key": "SQ_TMPD"
+        },
+        "0x7204": {
+            "group": "sequencer",
+            "key": "SQ_TMPU"
+        },
+        "0x7205": {
+            "group": "sequencer",
+            "key": "SQ_RESD"
+        },
+        "0x7206": {
+            "group": "sequencer",
+            "key": "SQ_RESU"
+        },
+        "0x7207": {
+            "group": "sequencer",
+            "key": "SQ_SALL"
+        },
+        "0x7208": {
+            "group": "sequencer",
+            "key": "SQ_SCLR"
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_steno.hjson

@@ -0,0 +1,20 @@
+{
+    "keycodes": {
+        "0x74F0": {
+            "group": "steno",
+            "key": "QK_STENO_BOLT"
+        },
+        "0x74F1": {
+            "group": "steno",
+            "key": "QK_STENO_GEMINI"
+        },
+        "0x74F2": {
+            "group": "steno",
+            "key": "QK_STENO_COMB"
+        },
+        "0x74FC": {
+            "group": "steno",
+            "key": "QK_STENO_COMB_MAX"
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_swap_hands.hjson

@@ -0,0 +1,32 @@
+{
+    "keycodes": {
+        "0x56F0": {
+            "group": "swap_hands",
+            "key": "SH_TG"
+        },
+        "0x56F1": {
+            "group": "swap_hands",
+            "key": "SH_TT"
+        },
+        "0x56F2": {
+            "group": "swap_hands",
+            "key": "SH_MON"
+        },
+        "0x56F3": {
+            "group": "swap_hands",
+            "key": "SH_MOFF"
+        },
+        "0x56F4": {
+            "group": "swap_hands",
+            "key": "SH_OFF"
+        },
+        "0x56F5": {
+            "group": "swap_hands",
+            "key": "SH_ON"
+        },
+        "0x56F6": {
+            "group": "swap_hands",
+            "key": "SH_OS"
+        }
+    }
+}

data/mappings/defaults.hjson

@@ -0,0 +1,77 @@
+{
+    "development_board": {
+        "promicro": {
+            "processor": "atmega32u4",
+            "bootloader": "caterina",
+            "pin_compatible": "promicro"
+        },
+        "elite_c": {
+            "processor": "atmega32u4",
+            "bootloader": "atmel-dfu",
+            "pin_compatible": "promicro"
+        },
+        "elite_pi": {
+            "processor": "RP2040",
+            "bootloader": "rp2040",
+            "board": "QMK_PM2040",
+            "pin_compatible": "promicro"
+        },
+        "proton_c": {
+            "processor": "STM32F303",
+            "bootloader": "stm32-dfu",
+            "board": "QMK_PROTON_C",
+            "pin_compatible": "promicro"
+        },
+        "kb2040": {
+            "processor": "RP2040",
+            "bootloader": "rp2040",
+            "board": "QMK_PM2040",
+            "pin_compatible": "promicro"
+        },
+        "promicro_rp2040": {
+            "processor": "RP2040",
+            "bootloader": "rp2040",
+            "board": "QMK_PM2040",
+            "pin_compatible": "promicro"
+        },
+        "blok": {
+            "processor": "RP2040",
+            "bootloader": "rp2040",
+            "board": "QMK_PM2040",
+            "pin_compatible": "promicro"
+        },
+        "bit_c_pro": {
+            "processor": "RP2040",
+            "bootloader": "rp2040",
+            "board": "QMK_PM2040",
+            "pin_compatible": "promicro"
+        },
+        "bluepill": {
+            "processor": "STM32F103",
+            "bootloader": "stm32duino",
+            "board": "STM32_F103_STM32DUINO"
+        },
+        "blackpill_f401": {
+            "processor": "STM32F401",
+            "bootloader": "stm32-dfu",
+            "board": "BLACKPILL_STM32_F401"
+        },
+        "blackpill_f411": {
+            "processor": "STM32F411",
+            "bootloader": "stm32-dfu",
+            "board": "BLACKPILL_STM32_F411"
+        },
+        "stemcell": {
+            "processor": "STM32F411",
+            "bootloader": "tinyuf2",
+            "board": "STEMCELL",
+            "pin_compatible": "promicro"
+        },
+        "bonsai_c4": {
+            "processor": "STM32F411",
+            "bootloader": "stm32-dfu",
+            "board": "BONSAI_C4",
+            "pin_compatible": "promicro"
+        }
+    }
+}

data/mappings/defaults.json

@@ -1,71 +0,0 @@
-{
-    "development_board": {
-        "promicro": {
-            "processor": "atmega32u4",
-            "bootloader": "caterina",
-            "pin_compatible": "promicro"
-        },
-        "elite_c": {
-            "processor": "atmega32u4",
-            "bootloader": "atmel-dfu",
-            "pin_compatible": "promicro"
-        },
-        "proton_c": {
-            "processor": "STM32F303",
-            "bootloader": "stm32-dfu",
-            "board": "QMK_PROTON_C",
-            "pin_compatible": "promicro"
-        },
-        "kb2040": {
-            "processor": "RP2040",
-            "bootloader": "rp2040",
-            "board": "QMK_PM2040",
-            "pin_compatible": "promicro"
-        },
-        "promicro_rp2040": {
-            "processor": "RP2040",
-            "bootloader": "rp2040",
-            "board": "QMK_PM2040",
-            "pin_compatible": "promicro"
-        },
-        "blok": {
-            "processor": "RP2040",
-            "bootloader": "rp2040",
-            "board": "QMK_PM2040",
-            "pin_compatible": "promicro"
-        },
-        "bit_c_pro": {
-            "processor": "RP2040",
-            "bootloader": "rp2040",
-            "board": "QMK_PM2040",
-            "pin_compatible": "promicro"
-        },
-        "bluepill": {
-            "processor": "STM32F103",
-            "bootloader": "stm32duino",
-            "board": "STM32_F103_STM32DUINO"
-        },
-        "blackpill_f401": {
-            "processor": "STM32F401",
-            "bootloader": "stm32-dfu",
-            "board": "BLACKPILL_STM32_F401"
-        },
-        "blackpill_f411": {
-            "processor": "STM32F411",
-            "bootloader": "stm32-dfu",
-            "board": "BLACKPILL_STM32_F411"
-        },
-        "stemcell": {
-            "processor": "STM32F411",
-            "bootloader": "tinyuf2",
-            "board": "STEMCELL",
-            "pin_compatible": "promicro"
-        },
-        "bonsai_c4": {
-            "processor": "STM32F411",
-            "bootloader": "stm32-dfu",
-            "board": "GENERIC_STM32_F411XE",
-            "pin_compatible": "promicro"
-        }
-    }
-}

data/mappings/info_config.hjson

@@ -0,0 +1,134 @@
+// This file maps keys between `config.h` and `info.json`. It is used by QMK
+// to correctly and consistently map back and forth between the two systems.
+{
+    // Format:
+    // <config.h key>: {"info_key": <info.json key>, ["value_type": <value_type>], ["to_json": <true/false>], ["to_c": <true/false>]}
+    // value_type: one of "array", "array.int", "bool", "int", "hex", "list", "mapping", "str", "raw"
+    // to_json: Default `true`. Set to `false` to exclude this mapping from info.json
+    // to_c: Default `true`. Set to `false` to exclude this mapping from config.h
+    // warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places
+    // deprecated: Default `false`. Set to `true` to turn on warning when a value exists
+    // invalid: Default `false`. Set to `true` to generate errors when a value exists
+    // replace_with: use with a key marked deprecated or invalid to designate a replacement
+    "AUDIO_VOICES": {"info_key": "audio.voices", "value_type": "bool"},
+    "BACKLIGHT_BREATHING": {"info_key": "backlight.breathing", "value_type": "bool"},
+    "BREATHING_PERIOD": {"info_key": "backlight.breathing_period", "value_type": "int"},
+    "BACKLIGHT_LEVELS": {"info_key": "backlight.levels", "value_type": "int"},
+    "BACKLIGHT_LIMIT_VAL": {"info_key": "backlight.max_brightness", "value_type": "int"},
+    "BACKLIGHT_ON_STATE": {"info_key": "backlight.on_state", "value_type": "int"},
+    "BACKLIGHT_PIN": {"info_key": "backlight.pin"},
+    "BACKLIGHT_PINS": {"info_key": "backlight.pins", "value_type": "array"},
+    "BOTH_SHIFTS_TURNS_ON_CAPS_WORD": {"info_key": "caps_word.both_shifts_turns_on", "value_type": "bool"},
+    "CAPS_WORD_IDLE_TIMEOUT": {"info_key": "caps_word.idle_timeout", "value_type": "int"},
+    "COMBO_COUNT": {"info_key": "combo.count", "value_type": "int"},
+    "COMBO_TERM": {"info_key": "combo.term", "value_type": "int"},
+    "DEBOUNCE": {"info_key": "debounce", "value_type": "int"},
+    "DIODE_DIRECTION": {"info_key": "diode_direction"},
+    "DOUBLE_TAP_SHIFT_TURNS_ON_CAPS_WORD": {"info_key": "caps_word.double_tap_shift_turns_on", "value_type": "bool"},
+    "FORCE_NKRO": {"info_key": "usb.force_nkro", "value_type": "bool"},
+    "DYNAMIC_KEYMAP_EEPROM_MAX_ADDR": {"info_key": "dynamic_keymap.eeprom_max_addr", "value_type": "int"},
+    "DYNAMIC_KEYMAP_LAYER_COUNT": {"info_key": "dynamic_keymap.layer_count", "value_type": "int"},
+    "IGNORE_MOD_TAP_INTERRUPT": {"info_key": "tapping.ignore_mod_tap_interrupt", "value_type": "bool"},
+    "IGNORE_MOD_TAP_INTERRUPT_PER_KEY": {"info_key": "tapping.ignore_mod_tap_interrupt_per_key", "value_type": "bool"},
+    "HOLD_ON_OTHER_KEY_PRESS": {"info_key": "tapping.hold_on_other_key_press", "value_type": "bool"},
+    "HOLD_ON_OTHER_KEY_PRESS_PER_KEY": {"info_key": "tapping.hold_on_other_key_press_per_key", "value_type": "bool"},
+    "LAYOUTS": {"info_key": "layout_aliases", "value_type": "mapping"},
+    "LEADER_PER_KEY_TIMING": {"info_key": "leader_key.timing", "value_type": "bool"},
+    "LEADER_KEY_STRICT_KEY_PROCESSING": {"info_key": "leader_key.strict_processing", "value_type": "bool"},
+    "LEADER_TIMEOUT": {"info_key": "leader_key.timeout", "value_type": "int"},
+    "LED_CAPS_LOCK_PIN": {"info_key": "indicators.caps_lock"},
+    "LED_NUM_LOCK_PIN": {"info_key": "indicators.num_lock"},
+    "LED_SCROLL_LOCK_PIN": {"info_key": "indicators.scroll_lock"},
+    "LED_COMPOSE_PIN": {"info_key": "indicators.compose"},
+    "LED_KANA_PIN": {"info_key": "indicators.kana"},
+    "LED_PIN_ON_STATE": {"info_key": "indicators.on_state", "value_type": "int"},
+    "LED_MATRIX_CENTER": {"info_key": "led_matrix.center_point", "value_type": "array.int"},
+    "LED_MATRIX_MAXIMUM_BRIGHTNESS": {"info_key": "led_matrix.max_brightness", "value_type": "int"},
+    "LED_MATRIX_SPLIT": {"info_key": "led_matrix.split_count", "value_type": "array.int"},
+    "LED_MATRIX_TIMEOUT": {"info_key": "led_matrix.timeout", "value_type": "int"},
+    "LED_MATRIX_HUE_STEP": {"info_key": "led_matrix.hue_steps", "value_type": "int"},
+    "LED_MATRIX_SAT_STEP": {"info_key": "led_matrix.sat_steps", "value_type": "int"},
+    "LED_MATRIX_VAL_STEP": {"info_key": "led_matrix.val_steps", "value_type": "int"},
+    "LED_MATRIX_SPD_STEP": {"info_key": "led_matrix.speed_steps", "value_type": "int"},
+    "MATRIX_HAS_GHOST": {"info_key": "matrix_pins.ghost", "value_type": "bool"},
+    "MATRIX_IO_DELAY": {"info_key": "matrix_pins.io_delay", "value_type": "int"},
+    "MOUSEKEY_DELAY": {"info_key": "mousekey.delay", "value_type": "int"},
+    "MOUSEKEY_INTERVAL": {"info_key": "mousekey.interval", "value_type": "int"},
+    "MOUSEKEY_MAX_SPEED": {"info_key": "mousekey.max_speed", "value_type": "int"},
+    "MOUSEKEY_TIME_TO_MAX": {"info_key": "mousekey.time_to_max", "value_type": "int"},
+    "MOUSEKEY_WHEEL_DELAY": {"info_key": "mousekey.wheel_delay", "value_type": "int"},
+    "ONESHOT_TIMEOUT": {"info_key": "oneshot.timeout", "value_type": "int"},
+    "ONESHOT_TAP_TOGGLE": {"info_key": "oneshot.tap_toggle", "value_type": "int"},
+    "PERMISSIVE_HOLD": {"info_key": "tapping.permissive_hold", "value_type": "bool"},
+    "PERMISSIVE_HOLD_PER_KEY": {"info_key": "tapping.permissive_hold_per_key", "value_type": "bool"},
+    "PS2_CLOCK_PIN": {"info_key": "ps2.clock_pin"},
+    "PS2_DATA_PIN": {"info_key": "ps2.data_pin"},
+    "RETRO_TAPPING": {"info_key": "tapping.retro", "value_type": "bool"},
+    "RETRO_TAPPING_PER_KEY": {"info_key": "tapping.retro_per_key", "value_type": "bool"},
+    "RGB_DI_PIN": {"info_key": "rgblight.pin"},
+    "RGBLED_NUM": {"info_key": "rgblight.led_count", "value_type": "int"},
+    "RGBLED_SPLIT": {"info_key": "rgblight.split_count", "value_type": "array.int"},
+    "RGBLIGHT_LAYER_BLINK": {"info_key": "rgblight.layers.blink", "value_type": "bool"},
+    "RGBLIGHT_LAYERS": {"info_key": "rgblight.layers.enabled", "value_type": "bool"},
+    "RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF": {"info_key": "rgblight.layers.override_rgb", "value_type": "bool"},
+    "RGBLIGHT_LIMIT_VAL": {"info_key": "rgblight.max_brightness", "value_type": "int"},
+    "RGBLIGHT_MAX_LAYERS": {"info_key": "rgblight.layers.max", "value_type": "int"},
+    "RGBLIGHT_HUE_STEP": {"info_key": "rgblight.hue_steps", "value_type": "int"},
+    "RGBLIGHT_SAT_STEP": {"info_key": "rgblight.saturation_steps", "value_type": "int"},
+    "RGBLIGHT_VAL_STEP": {"info_key": "rgblight.brightness_steps", "value_type": "int"},
+    "RGBLIGHT_SLEEP": {"info_key": "rgblight.sleep", "value_type": "bool"},
+    "RGBLIGHT_SPLIT": {"info_key": "rgblight.split", "value_type": "bool"},
+    "RGB_MATRIX_CENTER": {"info_key": "rgb_matrix.center_point", "value_type": "array.int"},
+    "RGB_MATRIX_MAXIMUM_BRIGHTNESS": {"info_key": "rgb_matrix.max_brightness", "value_type": "int"},
+    "RGB_MATRIX_SPLIT": {"info_key": "rgb_matrix.split_count", "value_type": "array.int"},
+    "RGB_MATRIX_TIMEOUT": {"info_key": "rgb_matrix.timeout", "value_type": "int"},
+    "RGB_MATRIX_HUE_STEP": {"info_key": "rgb_matrix.hue_steps", "value_type": "int"},
+    "RGB_MATRIX_SAT_STEP": {"info_key": "rgb_matrix.sat_steps", "value_type": "int"},
+    "RGB_MATRIX_VAL_STEP": {"info_key": "rgb_matrix.val_steps", "value_type": "int"},
+    "RGB_MATRIX_SPD_STEP": {"info_key": "rgb_matrix.speed_steps", "value_type": "int"},
+    "RGBW": {"info_key": "rgblight.rgbw", "value_type": "bool"},
+    "QMK_ESC_OUTPUT": {"info_key": "qmk_lufa_bootloader.esc_output"},
+    "QMK_ESC_INPUT": {"info_key": "qmk_lufa_bootloader.esc_input"},
+    "QMK_LED": {"info_key": "qmk_lufa_bootloader.led"},
+    "QMK_SPEAKER": {"info_key": "qmk_lufa_bootloader.speaker"},
+    "SECURE_UNLOCK_SEQUENCE": {"info_key": "secure.unlock_sequence", "value_type": "array.array.int", "to_json": false},
+    "SECURE_UNLOCK_TIMEOUT": {"info_key": "secure.unlock_timeout", "value_type": "int"},
+    "SECURE_IDLE_TIMEOUT": {"info_key": "secure.idle_timeout", "value_type": "int"},
+    "SENDSTRING_BELL": {"info_key": "audio.macro_beep", "value_type": "bool"},
+    "SPLIT_MODS_ENABLE": {"info_key": "split.transport.sync_modifiers", "value_type": "bool"},
+    "SPLIT_TRANSPORT_MIRROR": {"info_key": "split.transport.sync_matrix_state", "value_type": "bool"},
+    "SPLIT_USB_DETECT": {"info_key": "split.usb_detect.enabled", "value_type": "bool"},
+    "SPLIT_USB_TIMEOUT": {"info_key": "split.usb_detect.timeout", "value_type": "int"},
+    "SPLIT_USB_TIMEOUT_POLL": {"info_key": "split.usb_detect.polling_interval", "value_type": "int"},
+    "SPLIT_WATCHDOG_ENABLE": {"info_key": "split.transport.watchdog", "value_type": "bool"},
+    "SPLIT_WATCHDOG_TIMEOUT": {"info_key": "split.transport.watchdog_timeout", "value_type": "int"},
+    "SOFT_SERIAL_PIN": {"info_key": "split.soft_serial_pin"},
+    "SOFT_SERIAL_SPEED": {"info_key": "split.soft_serial_speed"},
+    "TAP_CODE_DELAY": {"info_key": "qmk.tap_keycode_delay", "value_type": "int"},
+    "TAP_HOLD_CAPS_DELAY": {"info_key": "qmk.tap_capslock_delay", "value_type": "int"},
+    "TAPPING_FORCE_HOLD": {"info_key": "tapping.force_hold", "value_type": "bool"},
+    "TAPPING_FORCE_HOLD_PER_KEY": {"info_key": "tapping.force_hold_per_key", "value_type": "bool"},
+    "TAPPING_TERM": {"info_key": "tapping.term", "value_type": "int"},
+    "TAPPING_TERM_PER_KEY": {"info_key": "tapping.term_per_key", "value_type": "bool"},
+    "TAPPING_TOGGLE": {"info_key": "tapping.toggle", "value_type": "int"},
+    "USB_MAX_POWER_CONSUMPTION": {"info_key": "usb.max_power", "value_type": "int"},
+    "USB_POLLING_INTERVAL_MS": {"info_key": "usb.polling_interval", "value_type": "int"},
+    "USB_SUSPEND_WAKEUP_DELAY": {"info_key": "usb.suspend_wakeup_delay", "value_type": "int"},
+
+    // Items we want flagged in lint
+    "NO_ACTION_MACRO": {"info_key": "_invalid.no_action_macro", "invalid": true},
+    "NO_ACTION_FUNCTION": {"info_key": "_invalid.no_action_function", "invalid": true},
+    "DESCRIPTION": {"info_key": "_invalid.usb_description", "invalid": true},
+    "DEBOUNCING_DELAY": {"info_key": "_invalid.debouncing_delay", "invalid": true, "replace_with": "DEBOUNCE"},
+    "PREVENT_STUCK_MODIFIERS": {"info_key": "_invalid.prevent_stuck_mods", "invalid": true},
+    "UNUSED_PINS": {"info_key": "_invalid.unused_pins", "deprecated": true},
+    "RGBLIGHT_ANIMATIONS": {"info_key": "rgblight.animations.all", "value_type": "bool", "deprecated": true},
+    "QMK_KEYS_PER_SCAN": {"info_key": "qmk.keys_per_scan", "value_type": "int", "deprecated": true},
+
+    // USB params, need to mark as failure when specified in config.h, rather than deprecated
+    "PRODUCT_ID": {"info_key": "usb.pid", "value_type": "hex", "deprecated": true, "replace_with": "`usb.pid` in info.json"},
+    "VENDOR_ID": {"info_key": "usb.vid", "value_type": "hex", "deprecated": true, "replace_with": "`usb.vid` in info.json"},
+    "PRODUCT": {"info_key": "keyboard_name", "warn_duplicate": false, "value_type": "str", "deprecated": true, "replace_with": "`keyboard_name` in info.json"},
+    "MANUFACTURER": {"info_key": "manufacturer", "value_type": "str", "deprecated": true, "replace_with": "`manufacturer` in info.json"},
+    "DEVICE_VER": {"info_key": "usb.device_version", "value_type": "bcd_version", "deprecated": true, "replace_with": "`usb.device_version` in info.json"}
+}

data/mappings/info_config.json

@@ -1,119 +0,0 @@
-# This file maps keys between `config.h` and `info.json`. It is used by QMK
-# to correctly and consistently map back and forth between the two systems.
-{
-    # Format:
-    # <config.h key>: {"info_key": <info.json key>, ["value_type": <value_type>], ["to_json": <true/false>], ["to_c": <true/false>]}
-    # value_type: one of "array", "array.int", "bool", "int", "hex", "list", "mapping", "str", "raw"
-    # to_json: Default `true`. Set to `false` to exclude this mapping from info.json
-    # to_c: Default `true`. Set to `false` to exclude this mapping from config.h
-    # warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places
-    # deprecated: Default `false`. Set to `true` to turn on warning when a value exists
-    # invalid: Default `false`. Set to `true` to generate errors when a value exists
-    # replace_with: use with a key marked deprecated or invalid to designate a replacement
-    "AUDIO_VOICES": {"info_key": "audio.voices", "value_type": "bool"},
-    "BACKLIGHT_BREATHING": {"info_key": "backlight.breathing", "value_type": "bool"},
-    "BREATHING_PERIOD": {"info_key": "backlight.breathing_period", "value_type": "int"},
-    "BACKLIGHT_ON_STATE": {"info_key": "backlight.on_state", "value_type": "int"},
-    "BACKLIGHT_PIN": {"info_key": "backlight.pin"},
-    "BOTH_SHIFTS_TURNS_ON_CAPS_WORD": {"info_key": "caps_word.both_shifts_turns_on", "value_type": "bool"},
-    "CAPS_WORD_IDLE_TIMEOUT": {"info_key": "caps_word.idle_timeout", "value_type": "int"},
-    "COMBO_COUNT": {"info_key": "combo.count", "value_type": "int"},
-    "COMBO_TERM": {"info_key": "combo.term", "value_type": "int"},
-    "DEBOUNCE": {"info_key": "debounce", "value_type": "int"},
-    "DEVICE_VER": {"info_key": "usb.device_ver", "value_type": "hex"},
-    # TODO: Replace ^^^ with vvv
-    #"DEVICE_VER": {"info_key": "usb.device_version", "value_type": "bcd_version"},
-    "DIODE_DIRECTION": {"info_key": "diode_direction"},
-    "DOUBLE_TAP_SHIFT_TURNS_ON_CAPS_WORD": {"info_key": "caps_word.double_tap_shift_turns_on", "value_type": "bool"},
-    "FORCE_NKRO": {"info_key": "usb.force_nkro", "value_type": "bool"},
-    "DYNAMIC_KEYMAP_EEPROM_MAX_ADDR": {"info_key": "dynamic_keymap.eeprom_max_addr", "value_type": "int"},
-    "DYNAMIC_KEYMAP_LAYER_COUNT": {"info_key": "dynamic_keymap.layer_count", "value_type": "int"},
-    "IGNORE_MOD_TAP_INTERRUPT": {"info_key": "tapping.ignore_mod_tap_interrupt", "value_type": "bool"},
-    "IGNORE_MOD_TAP_INTERRUPT_PER_KEY": {"info_key": "tapping.ignore_mod_tap_interrupt_per_key", "value_type": "bool"},
-    "LAYOUTS": {"info_key": "layout_aliases", "value_type": "mapping"},
-    "LEADER_PER_KEY_TIMING": {"info_key": "leader_key.timing", "value_type": "bool"},
-    "LEADER_KEY_STRICT_KEY_PROCESSING": {"info_key": "leader_key.strict_processing", "value_type": "bool"},
-    "LEADER_TIMEOUT": {"info_key": "leader_key.timeout", "value_type": "int"},
-    "LED_CAPS_LOCK_PIN": {"info_key": "indicators.caps_lock"},
-    "LED_NUM_LOCK_PIN": {"info_key": "indicators.num_lock"},
-    "LED_SCROLL_LOCK_PIN": {"info_key": "indicators.scroll_lock"},
-    "LED_COMPOSE_PIN": {"info_key": "indicators.compose"},
-    "LED_KANA_PIN": {"info_key": "indicators.kana"},
-    "LED_PIN_ON_STATE": {"info_key": "indicators.on_state", "value_type": "int"},
-    "MANUFACTURER": {"info_key": "manufacturer"},
-    "MATRIX_HAS_GHOST": {"info_key": "matrix_pins.ghost", "value_type": "bool"},
-    "MATRIX_IO_DELAY": {"info_key": "matrix_pins.io_delay", "value_type": "int"},
-    "MOUSEKEY_DELAY": {"info_key": "mousekey.delay", "value_type": "int"},
-    "MOUSEKEY_INTERVAL": {"info_key": "mousekey.interval", "value_type": "int"},
-    "MOUSEKEY_MAX_SPEED": {"info_key": "mousekey.max_speed", "value_type": "int"},
-    "MOUSEKEY_TIME_TO_MAX": {"info_key": "mousekey.time_to_max", "value_type": "int"},
-    "MOUSEKEY_WHEEL_DELAY": {"info_key": "mousekey.wheel_delay", "value_type": "int"},
-    "ONESHOT_TIMEOUT": {"info_key": "oneshot.timeout", "value_type": "int"},
-    "ONESHOT_TAP_TOGGLE": {"info_key": "oneshot.tap_toggle", "value_type": "int"},
-    "PERMISSIVE_HOLD": {"info_key": "tapping.permissive_hold", "value_type": "bool"},
-    "PERMISSIVE_HOLD_PER_KEY": {"info_key": "tapping.permissive_hold_per_key", "value_type": "bool"},
-    "RETRO_TAPPING": {"info_key": "tapping.retro", "value_type": "bool"},
-    "RETRO_TAPPING_PER_KEY": {"info_key": "tapping.retro_per_key", "value_type": "bool"},
-    "RGB_DI_PIN": {"info_key": "rgblight.pin"},
-    "RGBLED_NUM": {"info_key": "rgblight.led_count", "value_type": "int"},
-    "RGBLED_SPLIT": {"info_key": "rgblight.split_count", "value_type": "array.int"},
-    "RGBLIGHT_EFFECT_ALTERNATING": {"info_key": "rgblight.animations.alternating", "value_type": "bool"},
-    "RGBLIGHT_EFFECT_BREATHING": {"info_key": "rgblight.animations.breathing", "value_type": "bool"},
-    "RGBLIGHT_EFFECT_CHRISTMAS": {"info_key": "rgblight.animations.christmas", "value_type": "bool"},
-    "RGBLIGHT_EFFECT_KNIGHT": {"info_key": "rgblight.animations.knight", "value_type": "bool"},
-    "RGBLIGHT_EFFECT_RAINBOW_MOOD": {"info_key": "rgblight.animations.rainbow_mood", "value_type": "bool"},
-    "RGBLIGHT_EFFECT_RAINBOW_SWIRL": {"info_key": "rgblight.animations.rainbow_swirl", "value_type": "bool"},
-    "RGBLIGHT_EFFECT_RGB_TEST": {"info_key": "rgblight.animations.rgb_test", "value_type": "bool"},
-    "RGBLIGHT_EFFECT_SNAKE": {"info_key": "rgblight.animations.snake", "value_type": "bool"},
-    "RGBLIGHT_EFFECT_STATIC_GRADIENT": {"info_key": "rgblight.animations.static_gradient", "value_type": "bool"},
-    "RGBLIGHT_EFFECT_TWINKLE": {"info_key": "rgblight.animations.twinkle"},
-    "RGBLIGHT_LAYER_BLINK": {"info_key": "rgblight.layers.blink", "value_type": "bool"},
-    "RGBLIGHT_LAYERS": {"info_key": "rgblight.layers.enabled", "value_type": "bool"},
-    "RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF": {"info_key": "rgblight.layers.override_rgb", "value_type": "bool"},
-    "RGBLIGHT_LIMIT_VAL": {"info_key": "rgblight.max_brightness", "value_type": "int"},
-    "RGBLIGHT_MAX_LAYERS": {"info_key": "rgblight.layers.max", "value_type": "int"},
-    "RGBLIGHT_HUE_STEP": {"info_key": "rgblight.hue_steps", "value_type": "int"},
-    "RGBLIGHT_SAT_STEP": {"info_key": "rgblight.saturation_steps", "value_type": "int"},
-    "RGBLIGHT_VAL_STEP": {"info_key": "rgblight.brightness_steps", "value_type": "int"},
-    "RGBLIGHT_SLEEP": {"info_key": "rgblight.sleep", "value_type": "bool"},
-    "RGBLIGHT_SPLIT": {"info_key": "rgblight.split", "value_type": "bool"},
-    "RGBW": {"info_key": "rgblight.rgbw", "value_type": "bool"},
-    "PRODUCT": {"info_key": "keyboard_name", "warn_duplicate": false},
-    "PRODUCT_ID": {"info_key": "usb.pid", "value_type": "hex"},
-    "VENDOR_ID": {"info_key": "usb.vid", "value_type": "hex"},
-    "QMK_ESC_OUTPUT": {"info_key": "qmk_lufa_bootloader.esc_output"},
-    "QMK_ESC_INPUT": {"info_key": "qmk_lufa_bootloader.esc_input"},
-    "QMK_LED": {"info_key": "qmk_lufa_bootloader.led"},
-    "QMK_SPEAKER": {"info_key": "qmk_lufa_bootloader.speaker"},
-    "SECURE_UNLOCK_SEQUENCE": {"info_key": "secure.unlock_sequence", "value_type": "array.array.int", "to_json": false},
-    "SECURE_UNLOCK_TIMEOUT": {"info_key": "secure.unlock_timeout", "value_type": "int"},
-    "SECURE_IDLE_TIMEOUT": {"info_key": "secure.idle_timeout", "value_type": "int"},
-    "SENDSTRING_BELL": {"info_key": "audio.macro_beep", "value_type": "bool"},
-    "SPLIT_MODS_ENABLE": {"info_key": "split.transport.sync_modifiers", "value_type": "bool"},
-    "SPLIT_TRANSPORT_MIRROR": {"info_key": "split.transport.sync_matrix_state", "value_type": "bool"},
-    "SPLIT_USB_DETECT": {"info_key": "split.usb_detect.enabled", "value_type": "bool"},
-    "SPLIT_USB_TIMEOUT": {"info_key": "split.usb_detect.timeout", "value_type": "int"},
-    "SPLIT_USB_TIMEOUT_POLL": {"info_key": "split.usb_detect.polling_interval", "value_type": "int"},
-    "SOFT_SERIAL_PIN": {"info_key": "split.soft_serial_pin"},
-    "SOFT_SERIAL_SPEED": {"info_key": "split.soft_serial_speed"},
-    "TAP_CODE_DELAY": {"info_key": "qmk.tap_keycode_delay", "value_type": "int"},
-    "TAP_HOLD_CAPS_DELAY": {"info_key": "qmk.tap_capslock_delay", "value_type": "int"},
-    "TAPPING_FORCE_HOLD": {"info_key": "tapping.force_hold", "value_type": "bool"},
-    "TAPPING_FORCE_HOLD_PER_KEY": {"info_key": "tapping.force_hold_per_key", "value_type": "bool"},
-    "TAPPING_TERM": {"info_key": "tapping.term", "value_type": "int"},
-    "TAPPING_TERM_PER_KEY": {"info_key": "tapping.term_per_key", "value_type": "bool"},
-    "TAPPING_TOGGLE": {"info_key": "tapping.toggle", "value_type": "int"},
-    "USB_MAX_POWER_CONSUMPTION": {"info_key": "usb.max_power", "value_type": "int"},
-    "USB_POLLING_INTERVAL_MS": {"info_key": "usb.polling_interval", "value_type": "int"},
-    "USB_SUSPEND_WAKEUP_DELAY": {"info_key": "usb.suspend_wakeup_delay", "value_type": "int"},
-
-    # Items we want flagged in lint
-    "NO_ACTION_MACRO": {"info_key": "_invalid.no_action_macro", "invalid": true},
-    "NO_ACTION_FUNCTION": {"info_key": "_invalid.no_action_function", "invalid": true},
-    "DESCRIPTION": {"info_key": "_invalid.usb_description", "invalid": true},
-    "DEBOUNCING_DELAY": {"info_key": "_invalid.debouncing_delay", "invalid": true, "replace_with": "DEBOUNCE"},
-    "PREVENT_STUCK_MODIFIERS": {"info_key": "_invalid.prevent_stuck_mods", "invalid": true},
-    "UNUSED_PINS": {"info_key": "_invalid.unused_pins", "deprecated": true},
-    "RGBLIGHT_ANIMATIONS": {"info_key": "rgblight.animations.all", "value_type": "bool", "deprecated": true},
-    "QMK_KEYS_PER_SCAN": {"info_key": "qmk.keys_per_scan", "value_type": "int", "deprecated": true}
-}

data/mappings/info_rules.hjson

@@ -0,0 +1,44 @@
+// This file maps keys between `rules.mk` and `info.json`. It is used by QMK
+// to correctly and consistently map back and forth between the two systems.
+{
+    // Format:
+    // <rules.mk key>: {"info_key": <info.json key>, ["value_type": <value_type>], ["to_json": <true/false>], ["to_c": <true/false>]}
+    // value_type: one of "array", "array.int", "bool", "int", "list", "hex", "mapping", "str", "raw"
+    // to_json: Default `true`. Set to `false` to exclude this mapping from info.json
+    // to_c: Default `true`. Set to `false` to exclude this mapping from rules.mk
+    // warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places
+    // deprecated: Default `false`. Set to `true` to turn on warning when a value exists
+    // invalid: Default `false`. Set to `true` to generate errors when a value exists
+    // replace_with: use with a key marked deprecated or invalid to designate a replacement
+    "BOARD": {"info_key": "board"},
+    "BOOTLOADER": {"info_key": "bootloader", "warn_duplicate": false},
+    "BLUETOOTH_DRIVER": {"info_key": "bluetooth.driver"},
+    "CAPS_WORD_ENABLE": {"info_key": "caps_word.enabled", "value_type": "bool"},
+    "DEBOUNCE_TYPE": {"info_key": "build.debounce_type"},
+    "ENCODER_ENABLE": {"info_key": "encoder.enabled", "value_type": "bool"},
+    "FIRMWARE_FORMAT": {"info_key": "build.firmware_format"},
+    "KEYBOARD_SHARED_EP": {"info_key": "usb.shared_endpoint.keyboard", "value_type": "bool"},
+    "MOUSE_SHARED_EP": {"info_key": "usb.shared_endpoint.mouse", "value_type": "bool"},
+    "LAYOUTS": {"info_key": "community_layouts", "value_type": "list"},
+    "LED_MATRIX_DRIVER": {"info_key": "led_matrix.driver"},
+    "RGB_MATRIX_DRIVER": {"info_key": "rgb_matrix.driver"},
+    "LTO_ENABLE": {"info_key": "build.lto", "value_type": "bool"},
+    "MCU": {"info_key": "processor", "warn_duplicate": false},
+    "MOUSEKEY_ENABLE": {"info_key": "mouse_key.enabled", "value_type": "bool"},
+    "NO_USB_STARTUP_CHECK": {"info_key": "usb.no_startup_check", "value_type": "bool"},
+    "PIN_COMPATIBLE": {"info_key": "pin_compatible"},
+    "SECURE_ENABLE": {"info_key": "secure.enabled", "value_type": "bool"},
+    "SPLIT_KEYBOARD": {"info_key": "split.enabled", "value_type": "bool"},
+    "SPLIT_TRANSPORT": {"info_key": "split.transport.protocol", "to_c": false},
+    "WAIT_FOR_USB": {"info_key": "usb.wait_for", "value_type": "bool"},
+    "STENO_ENABLE": {"info_key": "stenography.enabled", "value_type": "bool"},
+    "STENO_PROTOCOL": {"info_key": "stenography.protocol"},
+    "PS2_ENABLE": {"info_key": "ps2.enabled", "value_type": "bool"},
+    "PS2_MOUSE_ENABLE": {"info_key": "ps2.mouse_enabled", "value_type": "bool"},
+    "PS2_DRIVER": {"info_key": "ps2.driver"},
+
+    // Items we want flagged in lint
+    "CTPC": {"info_key": "_deprecated.ctpc", "deprecated": true, "replace_with": "CONVERT_TO=proton_c"},
+    "CONVERT_TO_PROTON_C": {"info_key": "_deprecated.ctpc", "deprecated": true, "replace_with": "CONVERT_TO=proton_c"},
+    "VIAL_ENABLE": {"info_key": "_invalid.vial", "invalid": true}
+}

data/mappings/info_rules.json

@@ -1,40 +0,0 @@
-# This file maps keys between `rules.mk` and `info.json`. It is used by QMK
-# to correctly and consistently map back and forth between the two systems.
-{
-    # Format:
-    # <rules.mk key>: {"info_key": <info.json key>, ["value_type": <value_type>], ["to_json": <true/false>], ["to_c": <true/false>]}
-    # value_type: one of "array", "array.int", "bool", "int", "list", "hex", "mapping", "str", "raw"
-    # to_json: Default `true`. Set to `false` to exclude this mapping from info.json
-    # to_c: Default `true`. Set to `false` to exclude this mapping from rules.mk
-    # warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places
-    # deprecated: Default `false`. Set to `true` to turn on warning when a value exists
-    # invalid: Default `false`. Set to `true` to generate errors when a value exists
-    # replace_with: use with a key marked deprecated or invalid to designate a replacement
-    "BOARD": {"info_key": "board"},
-    "BOOTLOADER": {"info_key": "bootloader", "warn_duplicate": false},
-    "BLUETOOTH": {"info_key": "bluetooth.driver"},
-    "CAPS_WORD_ENABLE": {"info_key": "caps_word.enabled", "value_type": "bool"},
-    "ENCODER_ENABLE": {"info_key": "encoder.enabled", "value_type": "bool"},
-    "FIRMWARE_FORMAT": {"info_key": "build.firmware_format"},
-    "KEYBOARD_SHARED_EP": {"info_key": "usb.shared_endpoint.keyboard", "value_type": "bool"},
-    "MOUSE_SHARED_EP": {"info_key": "usb.shared_endpoint.mouse", "value_type": "bool"},
-    "LAYOUTS": {"info_key": "community_layouts", "value_type": "list"},
-    "LED_MATRIX_DRIVER": {"info_key": "led_matrix.driver"},
-    "RGB_MATRIX_DRIVER": {"info_key": "rgb_matrix.driver"},
-    "LTO_ENABLE": {"info_key": "build.lto", "value_type": "bool"},
-    "MCU": {"info_key": "processor", "warn_duplicate": false},
-    "MOUSEKEY_ENABLE": {"info_key": "mouse_key.enabled", "value_type": "bool"},
-    "NO_USB_STARTUP_CHECK": {"info_key": "usb.no_startup_check", "value_type": "bool"},
-    "PIN_COMPATIBLE": {"info_key": "pin_compatible"},
-    "SECURE_ENABLE": {"info_key": "secure.enabled", "value_type": "bool"},
-    "SPLIT_KEYBOARD": {"info_key": "split.enabled", "value_type": "bool"},
-    "SPLIT_TRANSPORT": {"info_key": "split.transport.protocol", "to_c": false},
-    "WAIT_FOR_USB": {"info_key": "usb.wait_for", "value_type": "bool"},
-    "STENO_ENABLE": {"info_key": "stenography.enabled", "value_type": "bool"},
-    "STENO_PROTOCOL": {"info_key": "stenography.protocol"},
-
-    # Items we want flagged in lint
-    "CTPC": {"info_key": "_deprecated.ctpc", "deprecated": true, "replace_with": "CONVERT_TO=proton_c"},
-    "CONVERT_TO_PROTON_C": {"info_key": "_deprecated.ctpc", "deprecated": true, "replace_with": "CONVERT_TO=proton_c"},
-    "VIAL_ENABLE": {"info_key": "_invalid.vial", "invalid": true}
-}

data/schemas/definitions.jsonschema

@@ -68,20 +68,8 @@
         "type": "number"
     },
     "keyboard": {
-        "oneOf": [
-            {
-                "type": "string",
-                "enum": [
-                    "converter/numeric_keypad_IIe",
-                    "emptystring/NQG",
-                    "maple_computing/christmas_tree/V2017"
-                ]
-            },
-            {
-                "type": "string",
-                "pattern": "^[0-9a-z][0-9a-z_/]*$"
-            }
-        ]
+        "type": "string",
+        "pattern": "^[0-9a-z][0-9a-z_/]*$"
     },
     "mcu_pin_array": {
         "type": "array",

data/schemas/keyboard.jsonschema

@@ -34,15 +34,66 @@
         },
         "development_board": {
             "type": "string",
-            "enum": ["promicro", "elite_c", "proton_c", "kb2040", "promicro_rp2040", "blok", "bit_c_pro", "stemcell", "bluepill", "blackpill_f401", "blackpill_f411", "bonsai_c4"]
+            "enum": ["promicro", "elite_c", "elite_pi", "proton_c", "kb2040", "promicro_rp2040", "blok", "bit_c_pro", "stemcell", "bluepill", "blackpill_f401", "blackpill_f411", "bonsai_c4"]
         },
         "pin_compatible": {
             "type": "string",
-            "enum": ["promicro"]
+            "enum": ["promicro", "elite_c"]
         },
         "processor": {
             "type": "string",
-            "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK64FX512", "MK66FX1M0", "RP2040", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L432", "STM32L433", "STM32L442", "STM32L443", "GD32VF103", "WB32F3G71", "WB32FQ95", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"]
+            "enum": [
+                "cortex-m0",
+                "cortex-m0plus",
+                "cortex-m3",
+                "cortex-m4",
+                "cortex-m7",
+                "cortex-m23",
+                "cortex-m33",
+                "cortex-m35p",
+                "cortex-m55",
+                "cortex-m85",
+                "MKL26Z64",
+                "MK20DX128",
+                "MK20DX256",
+                "MK64FX512",
+                "MK66FX1M0",
+                "RP2040",
+                "STM32F042",
+                "STM32F072",
+                "STM32F103",
+                "STM32F303",
+                "STM32F401",
+                "STM32F405",
+                "STM32F407",
+                "STM32F411",
+                "STM32F446",
+                "STM32G431",
+                "STM32G474",
+                "STM32L412",
+                "STM32L422",
+                "STM32L432",
+                "STM32L433",
+                "STM32L442",
+                "STM32L443",
+                "GD32VF103",
+                "WB32F3G71",
+                "WB32FQ95",
+                "atmega16u2",
+                "atmega32u2",
+                "atmega16u4",
+                "atmega32u4",
+                "at90usb162",
+                "at90usb646",
+                "at90usb647",
+                "at90usb1286",
+                "at90usb1287",
+                "atmega32a",
+                "atmega328p",
+                "atmega328",
+                "attiny85",
+                "unknown"
+            ]
         },
         "audio": {
             "type": "object",
@@ -64,7 +115,9 @@
                     "minimum": 1,
                     "maximum": 31
                 },
+                "max_brightness": {"$ref": "qmk.definitions.v1#/unsigned_int_8"},
                 "pin": {"$ref": "qmk.definitions.v1#/mcu_pin"},
+                "pins": {"$ref": "qmk.definitions.v1#/mcu_pin_array"},
                 "on_state": {"$ref": "qmk.definitions.v1#/bit"}
             }
         },
@@ -75,8 +128,7 @@
                 "driver": {
                     "type": "string",
                     "enum": ["BluefruitLE", "RN42"]
-                },
-                "lto": {"type": "boolean"}
+                }
             }
         },
         "board": {
@@ -89,7 +141,6 @@
             "enum": [
                 "atmel-dfu",
                 "bootloadhid",
-                "bootloadHID",
                 "caterina",
                 "custom",
                 "gd32v-dfu",
@@ -106,7 +157,6 @@
                 "tinyuf2",
                 "unknown",
                 "usbasploader",
-                "USBasp",
                 "wb32-dfu"
             ]
         },
@@ -120,7 +170,7 @@
             "properties": {
                 "debounce_type": {
                     "type": "string",
-                    "enum": ["custom", "eager_pk", "eager_pr", "sym_defer_pk", "sym_defer_pr", "sym_eager_pk"]
+                    "enum": ["asym_eager_defer_pk", "custom", "sym_defer_g", "sym_defer_pk", "sym_defer_pr", "sym_eager_pk", "sym_eager_pr"]
                 },
                 "firmware_format": {
                     "type": "string",
@@ -195,6 +245,7 @@
                         "items": {
                             "type": "object",
                             "additionalProperties": false,
+                            "required": ["x", "y"],
                             "properties": {
                                 "label": {
                                     "type": "string",
@@ -267,7 +318,31 @@
         "led_matrix": {
             "type": "object",
             "properties": {
+                "animations": {
+                    "type": "object",
+                    "additionalProperties": {
+                        "type": "boolean"
+                    }
+                },
                 "driver": {"type": "string"},
+                "center_point": {
+                    "type": "array",
+                    "minItems": 2,
+                    "maxItems": 2,
+                    "items": {"$ref": "qmk.definitions.v1#/unsigned_int_8"}
+                },
+                "max_brightness": {"$ref": "qmk.definitions.v1#/unsigned_int_8"},
+                "timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "hue_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "sat_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "val_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "speed_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "split_count": {
+                    "type": "array",
+                    "minItems": 2,
+                    "maxItems": 2,
+                    "items": {"$ref": "qmk.definitions.v1#/unsigned_int"}
+                },
                 "layout": {
                     "type": "array",
                     "items": {
@@ -294,7 +369,31 @@
         "rgb_matrix": {
             "type": "object",
             "properties": {
+                "animations": {
+                    "type": "object",
+                    "additionalProperties": {
+                        "type": "boolean"
+                    }
+                },
                 "driver": {"type": "string"},
+                "center_point": {
+                    "type": "array",
+                    "minItems": 2,
+                    "maxItems": 2,
+                    "items": {"$ref": "qmk.definitions.v1#/unsigned_int_8"}
+                },
+                "max_brightness": {"$ref": "qmk.definitions.v1#/unsigned_int_8"},
+                "timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "hue_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "sat_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "val_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "speed_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "split_count": {
+                    "type": "array",
+                    "minItems": 2,
+                    "maxItems": 2,
+                    "items": {"$ref": "qmk.definitions.v1#/unsigned_int"}
+                },
                 "layout": {
                     "type": "array",
                     "items": {
@@ -393,6 +492,20 @@
                 }
             }
         },
+        "ps2": {
+            "type": "object",
+            "additionalProperties": false,
+            "properties": {
+                "enabled": {"type": "boolean"},
+                "mouse_enabled": {"type": "boolean"},
+                "clock_pin": {"$ref": "qmk.definitions.v1#/mcu_pin"},
+                "data_pin": {"$ref": "qmk.definitions.v1#/mcu_pin"},
+                "driver": {
+                    "type": "string",
+                    "enum": ["busywait", "interrupt", "usart", "vendor"]
+                }
+            }
+        },
         "split": {
             "type": "object",
             "additionalProperties": false,
@@ -449,7 +562,9 @@
                             "enum": ["custom", "i2c", "serial", "serial_usart"]
                         },
                         "sync_matrix_state": {"type": "boolean"},
-                        "sync_modifiers": {"type": "boolean"}
+                        "sync_modifiers": {"type": "boolean"},
+                        "watchdog": {"type": "boolean"},
+                        "watchdog_timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"}
                     }
                 },
                 "usb_detect": {
@@ -474,6 +589,8 @@
                 "force_hold_per_key": {"type": "boolean"},
                 "ignore_mod_tap_interrupt": {"type": "boolean"},
                 "ignore_mod_tap_interrupt_per_key": {"type": "boolean"},
+                "hold_on_other_key_press": {"type": "boolean"},
+                "hold_on_other_key_press_per_key": {"type": "boolean"},
                 "permissive_hold": {"type": "boolean"},
                 "permissive_hold_per_key": {"type": "boolean"},
                 "retro": {"type": "boolean"},
@@ -487,7 +604,10 @@
             "type": "object",
             "additionalProperties": false,
             "properties": {
-                "device_ver": {"$ref": "qmk.definitions.v1#/hex_number_4d"}, # Deprecated
+                "device_ver": {
+                    "$ref": "qmk.definitions.v1#/hex_number_4d",
+                    "$comment": "Deprecated: use device_version instead"
+                },
                 "device_version": {"$ref": "qmk.definitions.v1#/bcd_version"},
                 "force_nkro": {"type": "boolean"},
                 "pid": {"$ref": "qmk.definitions.v1#/hex_number_4d"},

data/schemas/keycodes.jsonschema

@@ -0,0 +1,57 @@
+{
+    "$schema": "https://json-schema.org/draft/2020-12/schema#",
+    "$id": "qmk.keycodes.v1",
+    "title": "Keycode Information",
+    "type": "object",
+    "definitions": {
+        "define": {
+            "type": "string",
+            "minLength": 2,
+            "maxLength": 50,
+            "pattern": "^[A-Zs_0-9]*$"
+        },
+        "hex_number_4d": {
+            "type": "string",
+            "pattern": "^0x[0-9A-F]{4}$"
+        }
+    },
+    "properties": {
+        "ranges": {
+            "type": "object",
+            "propertyNames": {
+                "type": "string"
+            },
+            "additionalProperties": {
+                "type": "object",
+                "required": [
+                    "define"
+                ],
+                "properties": {
+                    "define": {"$ref": "#/definitions/define"}
+                }
+            }
+        },
+        "keycodes": {
+            "type": "object",
+            "propertyNames": {
+                "$ref": "#/definitions/hex_number_4d"
+            },
+            "additionalProperties": {
+                "type": "object",
+                "required": [
+                    "key"
+                ],
+                "properties": {
+                    "key": {"$ref": "#/definitions/define"},
+                    "aliases": {
+                        "type": "array",
+                        "minItems": 1,
+                        "items": {
+                            "type": "string"
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

data/schemas/keymap.jsonschema

@@ -5,6 +5,10 @@
     "type": "object",
     "properties": {
         "author": {"type": "string"},
+        "converter": {
+            "type": "string",
+            "enum": ["elite_pi", "proton_c", "kb2040", "promicro_rp2040", "blok", "bit_c_pro", "stemcell", "bonsai_c4"]
+        },
         "host_language": {"$ref": "qmk.definitions.v1#/text_identifier"},
         "keyboard": {"$ref": "qmk.definitions.v1#/text_identifier"},
         "keymap": {"$ref": "qmk.definitions.v1#/text_identifier"},

docs/ChangeLog/20211127.md

@@ -56,19 +56,19 @@ You can now define up to 32 macros in your `keymap.json` file, as used by [QMK C
     "keyboard": "handwired/my_macropad",
     "keymap": "my_keymap",
     "macros": [
-        [ // first listed is MACRO_0...
+        [ // first listed is QK_MACRO_0...
             {"action":"down", "keycodes": ["LSFT"]},
             "hello world1",
             {"action": "up","keycodes": ["LSFT"]}
         ],
-        [ // ...then MACRO_1...
+        [ // ...then QK_MACRO_1...
             {"action":"tap", "keycodes": ["LCTL", "LALT", "DEL"]}
         ],
-        [ // ...then MACRO_2...
+        [ // ...then QK_MACRO_2...
             "ding!",
             {"action":"beep"}
         ],
-        [ // ...and MACRO_3.
+        [ // ...and QK_MACRO_3.
             {"action":"tap", "keycodes": ["F1"]},
             {"action":"delay", "duration": "1000"},
             {"action":"tap", "keycodes": ["PGDN"]}
@@ -76,7 +76,7 @@ You can now define up to 32 macros in your `keymap.json` file, as used by [QMK C
     ],
     "layout": "LAYOUT_all",
     "layers": [
-        ["MACRO_0", "MACRO_1", "MACRO_2", "MACRO_3"]
+        ["QK_MACRO_0", "QK_MACRO_1", "QK_MACRO_2", "QK_MACRO_3"]
     ]
 }
 ```

docs/ChangeLog/20221126.md

@@ -0,0 +1,510 @@
+# QMK Breaking Changes - 2022 November 26 Changelog
+
+## Notable Features :id=notable-features
+
+### Autocorrect ([#15699](https://github.com/qmk/qmk_firmware/pull/15699)) :id=autocorrect
+
+_@getreuer_ in their infinite wisdom decided that autocorrect was a feature needed by QMK. As is customary, _@drashna_ adapted it to core and got it into a state that everyone else can use it. See [Feature: Autocorrect](feature_autocorrect.md) for more ifnormation (grin).
+
+## Changes Requiring User Action :id=changes-requiring-user-action
+
+### Updated Keyboard Codebases :id=updated-keyboard-codebases
+
+The following keyboards have had their source moved within QMK:
+
+| Old Keyboard Name                    | New Keyboard Name                    |
+|--------------------------------------|--------------------------------------|
+| converter/numeric_keypad_IIe         | converter/numeric_keypad_iie         |
+| durgod/k3x0/k310                     | durgod/k310                          |
+| durgod/k3x0/k320                     | durgod/k320                          |
+| emptystring/NQG                      | emptystring/nqg                      |
+| handwired/hillside/46                | hillside/46                          |
+| handwired/hillside/48                | hillside/48                          |
+| handwired/hillside/52                | hillside/52                          |
+| maple_computing/christmas_tree/V2017 | maple_computing/christmas_tree/v2017 |
+
+### Keycodes refactoring :id=keycodes-overhaul-user-action
+
+QMK's keycodes got a very significant overhaul this breaking changes cycle, with the bulk of the work done by _@zvecr_ and _@fauxpark_ -- renaming, reordering, removing has been their focus in this area. In an attempt to standardise interoperation with host applications, keycode values now have strong versioning so that any connected application has confidence that the keys it thinks exist on the board actually match up with what's compiled in. These strongly-versioned keycode definitions are now published online and will not change, so tools that remap keycodes have a reference to work with. In future versions of QMK, any new or changed keycodes will result in a new version specification. See [API docs](api_docs.md#qmk-constants) for more information on the published versions if you're writing a tool to manage keycodes.
+
+In most cases user keymaps in the repository have already been updated to reflect the new naming scheme. In some cases user keymaps outside the repository may strike a missing keycode with the old name -- it's highly likely that the name had already been deprecated for some time, and should have been updated previously.
+
+See below for the full list of changesets.
+
+!> Keycode aliases have been put in place in most cases to cater for "old names" being mapped to "new names" -- the documentation already reflects all the new naming of keys.
+
+### Configuration Item Refactoring :id=config-refactoring
+
+A number of configuration items have been renamed for consistency.
+
+RGB Matrix configuration:
+
+| Old Config              | New Config              |
+|-------------------------|-------------------------|
+| DRIVER_LED_COUNT        | RGB_MATRIX_LED_COUNT    |
+| RGB_DISABLE_TIMEOUT     | RGB_MATRIX_TIMEOUT      |
+| RGB_MATRIX_STARTUP_HUE  | RGB_MATRIX_DEFAULT_HUE  |
+| RGB_MATRIX_STARTUP_MODE | RGB_MATRIX_DEFAULT_MODE |
+| RGB_MATRIX_STARTUP_SAT  | RGB_MATRIX_DEFAULT_SAT  |
+| RGB_MATRIX_STARTUP_SPD  | RGB_MATRIX_DEFAULT_SPD  |
+| RGB_MATRIX_STARTUP_VAL  | RGB_MATRIX_DEFAULT_VAL  |
+
+LED Matrix configuration:
+
+| Old Config              | New Config              |
+|-------------------------|-------------------------|
+| DRIVER_LED_COUNT        | LED_MATRIX_LED_COUNT    |
+| LED_DISABLE_TIMEOUT     | LED_MATRIX_TIMEOUT      |
+| LED_MATRIX_STARTUP_MODE | LED_MATRIX_DEFAULT_MODE |
+| LED_MATRIX_STARTUP_SPD  | LED_MATRIX_DEFAULT_SPD  |
+| LED_MATRIX_STARTUP_VAL  | LED_MATRIX_DEFAULT_VAL  |
+
+Joystick configuration:
+
+| Old Config               | New Config               |
+|--------------------------|--------------------------|
+| JOYSTICK_AXES_COUNT      | JOYSTICK_AXIS_COUNT      |
+| JOYSTICK_AXES_RESOLUTION | JOYSTICK_AXIS_RESOLUTION |
+
+### Data-driven USB IDs Refactoring ([#18152](https://github.com/qmk/qmk_firmware/pull/18152)) :id=usb-ids-Refactoring
+
+QMK has decided to deprecate the specification of USB IDs inside `config.h` in favour of `info.json`, leaving data-driven as the only method to specify USB information. As per the deprecation schedule put forward last breaking changes cycle, USB information must be specified in `info.json` instead.
+
+Previously in `config.h`:
+```c
+#define VENDOR_ID    0x1234
+#define PRODUCT_ID   0x5678
+#define DEVICE_VER   0x0001
+#define MANUFACTURER Me
+#define PRODUCT      MyKeyboard
+```
+
+Replaced by `info.json`:
+```json
+{
+    "keyboard_name": "MyKeyboard",
+    "manufacturer": "Me",
+    "usb": {
+        "vid": "0x1234",
+        "pid": "0x5678",
+        "device_version": "0.0.1"
+    }
+}
+```
+
+### LED Indicator callback refactoring ([#14864](https://github.com/qmk/qmk_firmware/pull/18450)) :id=led-callback-refactor
+
+_RGB Matrix_ and _LED Matrix_ Indicator display code was traditionally difficult to override in keymaps as they did not follow the standard pattern of `bool *_kb()` deferring to `bool *_user()` functions, allowing signalling to the higher level that processing had already been done.
+
+This changes the standard callback model to allow for a base implementation to be provided by a keyboard, but also still allow for keymap-level overrides without needing to modify the keyboard's code.
+
+The old RGB Matrix keymap code went something like this:
+
+```c
+void rgb_matrix_indicators_user(void) {
+    // keymap LED code
+}
+```
+
+...but the new RGB Matrix keymap code looks like this:
+```c
+bool rgb_matrix_indicators_user(void) {
+    // keymap LED code
+    return false;
+}
+```
+
+Keyboard designers should now structure their keyboard-level routines like the following, in order to allow for keymap overrides:
+
+```c
+bool rgb_matrix_indicators_kb(void) {
+    // Defer to the keymap if they want to override
+    if (!rgb_matrix_indicators_user()) { return false; }
+
+    // keyboard LED code
+    return true;
+}
+```
+
+The equivalent transformations should be done for LED Matrix boards.
+
+### Unicode mode refactoring :id=unicode-mode-renaming
+
+Unicode modes were renamed in order to prevent collision with equivalent keycodes. The available values for `UNICODE_SELECTED_MODES` changed -- see [Feature: Unicode](feature_unicode.md#setting-the-input-mode) for the new list of values and how to configure them.
+
+## Notable core changes :id=notable-core
+
+This breaking changes cycle, a lot of the core changes are related to cleanup and refactoring -- commonly called "tech debt".
+
+### Keycodes refactoring :id=keycodes-overhaul-core-changes
+
+We aren't going to list each and every change -- they're far too numerous -- instead, we'll just list the related PRs in order to convey just how wide-reaching these changes were:
+
+* Align audio keycode names ([#18962](https://github.com/qmk/qmk_firmware/pull/18962))
+* Align dynamic tapping term keycode names ([#18963](https://github.com/qmk/qmk_firmware/pull/18963))
+* Align haptic feedback keycode names ([#18964](https://github.com/qmk/qmk_firmware/pull/18964))
+* Deprecate `CAPS_WORD`/`CAPSWRD` for `CW_TOGG` ([#18834](https://github.com/qmk/qmk_firmware/pull/18834))
+* Deprecate `KC_LEAD` for `QK_LEAD` ([#18792](https://github.com/qmk/qmk_firmware/pull/18792))
+* Deprecate `KC_LOCK` for `QK_LOCK` ([#18796](https://github.com/qmk/qmk_firmware/pull/18796))
+* Deprecate `KEY_OVERRIDE_*` keycodes for `KO_*` ([#18843](https://github.com/qmk/qmk_firmware/pull/18843))
+* Deprecate `ONESHOT_*` keycodes for `QK_ONE_SHOT_*` ([#18844](https://github.com/qmk/qmk_firmware/pull/18844))
+* Deprecate `SECURE_*` keycodes for `QK_SECURE_*` ([#18847](https://github.com/qmk/qmk_firmware/pull/18847))
+* Deprecate `VLK_TOG` for `VK_TOGG` ([#18807](https://github.com/qmk/qmk_firmware/pull/18807))
+* Initial DD keycode migration ([#18643](https://github.com/qmk/qmk_firmware/pull/18643))
+* Macro keycode name refactoring ([#18958](https://github.com/qmk/qmk_firmware/pull/18958))
+* Move mousekey keycodes into newly freed up keycode block ([#16076](https://github.com/qmk/qmk_firmware/pull/16076))
+* Normalise Auto Shift keycodes ([#18892](https://github.com/qmk/qmk_firmware/pull/18892))
+* Normalise Autocorrect keycodes ([#18893](https://github.com/qmk/qmk_firmware/pull/18893))
+* Normalise Combo keycodes ([#18877](https://github.com/qmk/qmk_firmware/pull/18877))
+* Normalise Dynamic Macro keycodes ([#18939](https://github.com/qmk/qmk_firmware/pull/18939))
+* Normalise Joystick and Programmable Button keycodes ([#18832](https://github.com/qmk/qmk_firmware/pull/18832))
+* Normalise MIDI keycodes ([#18972](https://github.com/qmk/qmk_firmware/pull/18972))
+* Normalise output selection (Bluetooth) keycodes ([#19004](https://github.com/qmk/qmk_firmware/pull/19004))
+* Normalise Space Cadet keycodes ([#18864](https://github.com/qmk/qmk_firmware/pull/18864))
+* Normalise Unicode keycodes ([#18898](https://github.com/qmk/qmk_firmware/pull/18898))
+* Publish constants metadata to API ([#19143](https://github.com/qmk/qmk_firmware/pull/19143))
+* Relocate US ANSI shifted keycode aliases ([#18634](https://github.com/qmk/qmk_firmware/pull/18634))
+* Remove `KC_DELT` ([#18882](https://github.com/qmk/qmk_firmware/pull/18882))
+* Remove `UNICODE_KEY_OSX` and `UC_OSX` ([#18290](https://github.com/qmk/qmk_firmware/pull/18290))
+* Remove deprecated RESET keycode alias ([#18271](https://github.com/qmk/qmk_firmware/pull/18271))
+* Remove legacy Debug keycode ([#18769](https://github.com/qmk/qmk_firmware/pull/18769))
+* Remove legacy EEPROM clear keycodes ([#18782](https://github.com/qmk/qmk_firmware/pull/18782))
+* Remove legacy fauxclicky and unicode keycodes ([#18800](https://github.com/qmk/qmk_firmware/pull/18800))
+* Remove legacy Grave Escape keycodes ([#18787](https://github.com/qmk/qmk_firmware/pull/18787))
+* Remove legacy international keycodes ([#18588](https://github.com/qmk/qmk_firmware/pull/18588))
+* Remove legacy keycodes, part 2 ([#18660](https://github.com/qmk/qmk_firmware/pull/18660))
+* Remove legacy keycodes, part 3 ([#18669](https://github.com/qmk/qmk_firmware/pull/18669))
+* Remove legacy keycodes, part 4 ([#18683](https://github.com/qmk/qmk_firmware/pull/18683))
+* Remove legacy keycodes, part 5 ([#18710](https://github.com/qmk/qmk_firmware/pull/18710))
+* Remove legacy keycodes, part 6 ([#18740](https://github.com/qmk/qmk_firmware/pull/18740))
+* Remove legacy locking caps/num/scroll keycodes ([#18601](https://github.com/qmk/qmk_firmware/pull/18601))
+* Remove legacy sendstring keycodes ([#18749](https://github.com/qmk/qmk_firmware/pull/18749))
+* Reworked backlight keycodes. ([#18961](https://github.com/qmk/qmk_firmware/pull/18961))
+
+### Board Converters :id=board-converters
+
+There was additional work in the space of board converters -- historically QMK allowed for "converting" a Pro Micro build to a QMK Proton-C build. The last few versions of QMK have added support for replacement boards much like the Proton-C, and this quarter was no exception:
+
+* Add Bonsai C4 as a platform board file ([#18901](https://github.com/qmk/qmk_firmware/pull/18901))
+* Add converter support to keymap.json ([#18776](https://github.com/qmk/qmk_firmware/pull/18776))
+* Add Elite-C to converters ([#18309](https://github.com/qmk/qmk_firmware/pull/18309))
+* Add Elite-Pi converter ([#18236](https://github.com/qmk/qmk_firmware/pull/18236))
+* Allow QK_MAKE to work with converters ([#18637](https://github.com/qmk/qmk_firmware/pull/18637))
+
+See [Feature: Converters](feature_converters.md) for the full list of board conversions available.
+
+### Pointing and Digitizer device updates :id=pointing-and-digitizer
+
+Both pointing devices and digitizer got a host of updates this cycle. Inertia, automatic mouse layers, fixes for preventing sleep... you even get more buttons with digitizers!
+
+* add "inertia" mode for mouse keys ([#18774](https://github.com/qmk/qmk_firmware/pull/18774))
+* Digitizer feature improvements ([#19034](https://github.com/qmk/qmk_firmware/pull/19034))
+* Enabling Pointing Device support in register code functions ([#18363](https://github.com/qmk/qmk_firmware/pull/18363))
+* Feature: pointing device automatic mouse layer ([#17962](https://github.com/qmk/qmk_firmware/pull/17962))
+* Fix mouse report comparison failing on shared EP (fixes KB preventing sleep) ([#18060](https://github.com/qmk/qmk_firmware/pull/18060))
+* Fix mouse use within send_string ([#18659](https://github.com/qmk/qmk_firmware/pull/18659))
+* Handle mouse keys more consistently ([#18513](https://github.com/qmk/qmk_firmware/pull/18513))
+* Invert pointing device motion pin for cirque touchpads ([#18404](https://github.com/qmk/qmk_firmware/pull/18404))
+* Refactor more host code (programmable button & digitizer) ([#18565](https://github.com/qmk/qmk_firmware/pull/18565))
+
+## Full changelist :id=full-changelist
+
+Core:
+* quantum: led: split out led_update_ports() for customization of led behaviour ([#14452](https://github.com/qmk/qmk_firmware/pull/14452))
+* Add getreuer's Autocorrect feature to core ([#15699](https://github.com/qmk/qmk_firmware/pull/15699))
+* Move mousekey keycodes into newly freed up keycode block ([#16076](https://github.com/qmk/qmk_firmware/pull/16076))
+* Introduce pointing device specific debug messages ([#17663](https://github.com/qmk/qmk_firmware/pull/17663))
+* PWM Backlight for RP2040 ([#17706](https://github.com/qmk/qmk_firmware/pull/17706))
+* Adjust PWM hardware audio driver for RP2040 ([#17723](https://github.com/qmk/qmk_firmware/pull/17723))
+* Prevent tap dance from wiping dynamic macros ([#17880](https://github.com/qmk/qmk_firmware/pull/17880))
+* Feature: pointing device automatic mouse layer ([#17962](https://github.com/qmk/qmk_firmware/pull/17962))
+* Allow custom timings for WS2812 PIO driver ([#18006](https://github.com/qmk/qmk_firmware/pull/18006))
+* Use `TAP_CODE_DELAY` for encoder mapping by default. Add docs. ([#18098](https://github.com/qmk/qmk_firmware/pull/18098))
+* Move Oneshot mod callbacks to after mods are set ([#18101](https://github.com/qmk/qmk_firmware/pull/18101))
+* mcp23018: add return status to init ([#18178](https://github.com/qmk/qmk_firmware/pull/18178))
+* Switch over MANUFACTURER and PRODUCT to string literals ([#18183](https://github.com/qmk/qmk_firmware/pull/18183))
+* Remove deprecated USBasp and bootloadHID bootloader types ([#18195](https://github.com/qmk/qmk_firmware/pull/18195))
+* Chromeos keycodes ([#18212](https://github.com/qmk/qmk_firmware/pull/18212))
+* VIA V3 - The Custom UI Update ([#18222](https://github.com/qmk/qmk_firmware/pull/18222))
+* Move bootloader.mk to platforms ([#18228](https://github.com/qmk/qmk_firmware/pull/18228))
+* Simplify extrakeys sending at the host driver level ([#18230](https://github.com/qmk/qmk_firmware/pull/18230))
+* Add unicode mode change callbacks ([#18235](https://github.com/qmk/qmk_firmware/pull/18235))
+* Add Elite-Pi converter ([#18236](https://github.com/qmk/qmk_firmware/pull/18236))
+* Better handle EEPROM reset keycode ([#18244](https://github.com/qmk/qmk_firmware/pull/18244))
+* Work around WinCompose issue for U+Axxx or U+Exxx ([#18260](https://github.com/qmk/qmk_firmware/pull/18260))
+* Remove deprecated RESET keycode alias ([#18271](https://github.com/qmk/qmk_firmware/pull/18271))
+* Move Bluetooth-related function calls up to host/keyboard level ([#18274](https://github.com/qmk/qmk_firmware/pull/18274))
+* Added analog support for WB32 MCU. ([#18289](https://github.com/qmk/qmk_firmware/pull/18289))
+* Remove `UNICODE_KEY_OSX` and `UC_OSX` ([#18290](https://github.com/qmk/qmk_firmware/pull/18290))
+* Add Elite-C to converters ([#18309](https://github.com/qmk/qmk_firmware/pull/18309))
+* RN42 driver: small cleanups ([#18310](https://github.com/qmk/qmk_firmware/pull/18310))
+* Reboot wb32 devices after flashing ([#18323](https://github.com/qmk/qmk_firmware/pull/18323))
+* Refactor Unicode feature ([#18333](https://github.com/qmk/qmk_firmware/pull/18333))
+* Move fake EE_HANDS from EEPROM init. ([#18352](https://github.com/qmk/qmk_firmware/pull/18352))
+* Enabling Pointing Device support in register code functions ([#18363](https://github.com/qmk/qmk_firmware/pull/18363))
+* Start Bluetooth API ([#18366](https://github.com/qmk/qmk_firmware/pull/18366))
+* Add UART support for Kinetis boards ([#18370](https://github.com/qmk/qmk_firmware/pull/18370))
+* [QP] Add RGB565 surface. Docs clarification, cleanup, tabsification, and reordering. ([#18396](https://github.com/qmk/qmk_firmware/pull/18396))
+* Change `DRIVER_LED_COUNT` to `{LED,RGB}_MATRIX_LED_COUNT` ([#18399](https://github.com/qmk/qmk_firmware/pull/18399))
+* Invert pointing device motion pin for cirque touchpads ([#18404](https://github.com/qmk/qmk_firmware/pull/18404))
+* Change `{LED,RGB}_DISABLE_TIMEOUT` to `{LED,RGB}_MATRIX_TIMEOUT` ([#18415](https://github.com/qmk/qmk_firmware/pull/18415))
+* rewrite locking in split transaction handlers ([#18417](https://github.com/qmk/qmk_firmware/pull/18417))
+* remove busy waiting from rgblight functions ([#18418](https://github.com/qmk/qmk_firmware/pull/18418))
+* Serial-protocol: always clear receive queue on main half of split keyboard ([#18419](https://github.com/qmk/qmk_firmware/pull/18419))
+* Stabilize RP2040 Half-duplex PIO split comms take 2 ([#18421](https://github.com/qmk/qmk_firmware/pull/18421))
+* Copy RP2040 vector table to RAM on startup ([#18424](https://github.com/qmk/qmk_firmware/pull/18424))
+* Further refactoring of joystick feature ([#18437](https://github.com/qmk/qmk_firmware/pull/18437))
+* Start moving towards introspection-based data retrieval ([#18441](https://github.com/qmk/qmk_firmware/pull/18441))
+* RP2040: use built-in integer hardware divider and optimized i64 multiplication ([#18464](https://github.com/qmk/qmk_firmware/pull/18464))
+* Only trigger encoder callbacks on primary side ([#18467](https://github.com/qmk/qmk_firmware/pull/18467))
+* Handle mouse keys more consistently ([#18513](https://github.com/qmk/qmk_firmware/pull/18513))
+* Gentoo install script — build newlib with `nano` USE flag ([#18527](https://github.com/qmk/qmk_firmware/pull/18527))
+* Small un/register_code() cleanups ([#18544](https://github.com/qmk/qmk_firmware/pull/18544))
+* Refactor more host code (programmable button & digitizer) ([#18565](https://github.com/qmk/qmk_firmware/pull/18565))
+* Don't clear keys on layer change unless STRICT_LAYER_RELEASE is enabled ([#18577](https://github.com/qmk/qmk_firmware/pull/18577))
+* Remove legacy international keycodes ([#18588](https://github.com/qmk/qmk_firmware/pull/18588))
+* onekey: Enable ADC for STM32F072 Discovery ([#18592](https://github.com/qmk/qmk_firmware/pull/18592))
+* Implement split comms watchdog ([#18599](https://github.com/qmk/qmk_firmware/pull/18599))
+* Remove legacy locking caps/num/scroll keycodes ([#18601](https://github.com/qmk/qmk_firmware/pull/18601))
+* Use `get_u16_str` instead of `snprintf` in `autoshift_timer_report` ([#18606](https://github.com/qmk/qmk_firmware/pull/18606))
+* Refactor `send_extra` ([#18615](https://github.com/qmk/qmk_firmware/pull/18615))
+* LUFA: Consolidate report sending code ([#18629](https://github.com/qmk/qmk_firmware/pull/18629))
+* Relocate US ANSI shifted keycode aliases ([#18634](https://github.com/qmk/qmk_firmware/pull/18634))
+* Allow QK_MAKE to work with converters ([#18637](https://github.com/qmk/qmk_firmware/pull/18637))
+* Programmable Button API refactor and improve docs ([#18641](https://github.com/qmk/qmk_firmware/pull/18641))
+* Initial DD keycode migration ([#18643](https://github.com/qmk/qmk_firmware/pull/18643))
+* Remove legacy keycodes, part 2 ([#18660](https://github.com/qmk/qmk_firmware/pull/18660))
+* Remove legacy keycodes, part 3 ([#18669](https://github.com/qmk/qmk_firmware/pull/18669))
+* Remove legacy keycodes, part 4 ([#18683](https://github.com/qmk/qmk_firmware/pull/18683))
+* Revert "mcp23018: add return status to init" ([#18709](https://github.com/qmk/qmk_firmware/pull/18709))
+* Remove legacy keycodes, part 5 ([#18710](https://github.com/qmk/qmk_firmware/pull/18710))
+* Make QP driver init functions weak. ([#18717](https://github.com/qmk/qmk_firmware/pull/18717))
+* Add unit tests for HOLD_ON_OTHER_KEY_PRESS ([#18721](https://github.com/qmk/qmk_firmware/pull/18721))
+* Remove legacy keycodes, part 6 ([#18740](https://github.com/qmk/qmk_firmware/pull/18740))
+* Remove legacy sendstring keycodes ([#18749](https://github.com/qmk/qmk_firmware/pull/18749))
+* 4 Driver support for IS31FL3737 ([#18750](https://github.com/qmk/qmk_firmware/pull/18750))
+* Remove quantum/audio from global VPATH ([#18753](https://github.com/qmk/qmk_firmware/pull/18753))
+* Widen the ARM Cortex-M family support. Allow USB peripheral change. ([#18767](https://github.com/qmk/qmk_firmware/pull/18767))
+* Remove legacy Debug keycode ([#18769](https://github.com/qmk/qmk_firmware/pull/18769))
+* add "inertia" mode for mouse keys ([#18774](https://github.com/qmk/qmk_firmware/pull/18774))
+* Remove legacy EEPROM clear keycodes ([#18782](https://github.com/qmk/qmk_firmware/pull/18782))
+* Remove legacy Grave Escape keycodes ([#18787](https://github.com/qmk/qmk_firmware/pull/18787))
+* Deprecate `KC_LEAD` for `QK_LEAD` ([#18792](https://github.com/qmk/qmk_firmware/pull/18792))
+* Deprecate `KC_LOCK` for `QK_LOCK` ([#18796](https://github.com/qmk/qmk_firmware/pull/18796))
+* Remove legacy fauxclicky and unicode keycodes ([#18800](https://github.com/qmk/qmk_firmware/pull/18800))
+* Generalise CTPC logic from common_features ([#18803](https://github.com/qmk/qmk_firmware/pull/18803))
+* Deprecate `VLK_TOG` for `VK_TOGG` ([#18807](https://github.com/qmk/qmk_firmware/pull/18807))
+* ChibiOS USB: Add a dummy IN callback to work around LLD bugs ([#18811](https://github.com/qmk/qmk_firmware/pull/18811))
+* Normalise Joystick and Programmable Button keycodes ([#18832](https://github.com/qmk/qmk_firmware/pull/18832))
+* Deprecate `CAPS_WORD`/`CAPSWRD` for `CW_TOGG` ([#18834](https://github.com/qmk/qmk_firmware/pull/18834))
+* added BS_TOGG so BS_SWAP and BS_NORM can be on a single key ([#18837](https://github.com/qmk/qmk_firmware/pull/18837))
+* Remove some assumptions on sequential keycode ranges ([#18838](https://github.com/qmk/qmk_firmware/pull/18838))
+* Deprecate `KEY_OVERRIDE_*` keycodes for `KO_*` ([#18843](https://github.com/qmk/qmk_firmware/pull/18843))
+* Deprecate `ONESHOT_*` keycodes for `QK_ONE_SHOT_*` ([#18844](https://github.com/qmk/qmk_firmware/pull/18844))
+* Deprecate `SECURE_*` keycodes for `QK_SECURE_*` ([#18847](https://github.com/qmk/qmk_firmware/pull/18847))
+* Normalise Space Cadet keycodes ([#18864](https://github.com/qmk/qmk_firmware/pull/18864))
+* Allow overriding of dynamic keymap start address. ([#18867](https://github.com/qmk/qmk_firmware/pull/18867))
+* Formalise keyboard- and user-specific EEPROM blocks ([#18874](https://github.com/qmk/qmk_firmware/pull/18874))
+* Normalise Combo keycodes ([#18877](https://github.com/qmk/qmk_firmware/pull/18877))
+* Remove rgblight_list.h ([#18878](https://github.com/qmk/qmk_firmware/pull/18878))
+* Remove `KC_DELT` ([#18882](https://github.com/qmk/qmk_firmware/pull/18882))
+* Simplify Keymap Config EEPROM ([#18886](https://github.com/qmk/qmk_firmware/pull/18886))
+* Normalise Auto Shift keycodes ([#18892](https://github.com/qmk/qmk_firmware/pull/18892))
+* Normalise Autocorrect keycodes ([#18893](https://github.com/qmk/qmk_firmware/pull/18893))
+* Normalise Unicode keycodes ([#18898](https://github.com/qmk/qmk_firmware/pull/18898))
+* Add Bonsai C4 as a platform board file ([#18901](https://github.com/qmk/qmk_firmware/pull/18901))
+* Normalise Dynamic Macro keycodes ([#18939](https://github.com/qmk/qmk_firmware/pull/18939))
+* Reduce includes for sequencer header ([#18946](https://github.com/qmk/qmk_firmware/pull/18946))
+* Reduce includes for crc header ([#18947](https://github.com/qmk/qmk_firmware/pull/18947))
+* Reduce includes for caps_word header ([#18948](https://github.com/qmk/qmk_firmware/pull/18948))
+* Reduce includes for wpm header ([#18949](https://github.com/qmk/qmk_firmware/pull/18949))
+* Reduce includes for dip_switch header ([#18951](https://github.com/qmk/qmk_firmware/pull/18951))
+* Reduce includes for send_string header ([#18952](https://github.com/qmk/qmk_firmware/pull/18952))
+* Macro keycode name refactoring ([#18958](https://github.com/qmk/qmk_firmware/pull/18958))
+* Remove thermal printer. ([#18959](https://github.com/qmk/qmk_firmware/pull/18959))
+* Reworked backlight keycodes. ([#18961](https://github.com/qmk/qmk_firmware/pull/18961))
+* Align audio keycode names ([#18962](https://github.com/qmk/qmk_firmware/pull/18962))
+* Align dynamic tapping term keycode names ([#18963](https://github.com/qmk/qmk_firmware/pull/18963))
+* Align haptic feedback keycode names ([#18964](https://github.com/qmk/qmk_firmware/pull/18964))
+* NVRAM refactor, phase 1. ([#18969](https://github.com/qmk/qmk_firmware/pull/18969))
+* Normalise MIDI keycodes ([#18972](https://github.com/qmk/qmk_firmware/pull/18972))
+* Normalise output selection (Bluetooth) keycodes ([#19004](https://github.com/qmk/qmk_firmware/pull/19004))
+* Move EFL wear-leveling driver to be default for F1, F3, F4, L4, G4, WB32, GD32V. ([#19020](https://github.com/qmk/qmk_firmware/pull/19020))
+* Digitizer feature improvements ([#19034](https://github.com/qmk/qmk_firmware/pull/19034))
+* Joystick feature improvements ([#19052](https://github.com/qmk/qmk_firmware/pull/19052))
+* Add default limit to OLED dirty processing ([#19068](https://github.com/qmk/qmk_firmware/pull/19068))
+* Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` ([#19079](https://github.com/qmk/qmk_firmware/pull/19079))
+* Change `LED_MATRIX_STARTUP_*` defines to `LED_MATRIX_DEFAULT_*` ([#19080](https://github.com/qmk/qmk_firmware/pull/19080))
+* Extend eeconfig kb/user datablock API ([#19094](https://github.com/qmk/qmk_firmware/pull/19094))
+* Remove .noci functionality ([#19122](https://github.com/qmk/qmk_firmware/pull/19122))
+
+CLI:
+* Reject json with duplicate keys ([#18108](https://github.com/qmk/qmk_firmware/pull/18108))
+* Add pointing device support to data driven config ([#18215](https://github.com/qmk/qmk_firmware/pull/18215))
+* Disconnect `usb.device_ver` ([#18259](https://github.com/qmk/qmk_firmware/pull/18259))
+* Normalise info_config.h define generation ([#18439](https://github.com/qmk/qmk_firmware/pull/18439))
+* Generate DD RGBLight/LED/RGB Matrix animation defines ([#18459](https://github.com/qmk/qmk_firmware/pull/18459))
+* Add converter support to keymap.json ([#18776](https://github.com/qmk/qmk_firmware/pull/18776))
+* Ensure consistent clean behaviour ([#18781](https://github.com/qmk/qmk_firmware/pull/18781))
+* Format DD mappings and schemas ([#18924](https://github.com/qmk/qmk_firmware/pull/18924))
+* Publish hjson files as json ([#18996](https://github.com/qmk/qmk_firmware/pull/18996))
+* Add raw output option for QGF/QFF files. ([#18998](https://github.com/qmk/qmk_firmware/pull/18998))
+* Improve LED config parsing error messages ([#19007](https://github.com/qmk/qmk_firmware/pull/19007))
+* Revert "Add pointing device support to data driven config (#18215)" ([#19063](https://github.com/qmk/qmk_firmware/pull/19063))
+* Additional DD backlight config ([#19124](https://github.com/qmk/qmk_firmware/pull/19124))
+* Publish constants metadata to API ([#19143](https://github.com/qmk/qmk_firmware/pull/19143))
+
+Submodule updates:
+* Use a macro to compute the size of arrays at compile time ([#18044](https://github.com/qmk/qmk_firmware/pull/18044))
+* Update pico-sdk to version 1.4.0 ([#18423](https://github.com/qmk/qmk_firmware/pull/18423))
+
+Keyboards:
+* Rework PS/2 driver selection ([#17892](https://github.com/qmk/qmk_firmware/pull/17892))
+* Durgod K310/K320 Refactor ([#18224](https://github.com/qmk/qmk_firmware/pull/18224))
+* Optimise LAYOUT macro generation ([#18262](https://github.com/qmk/qmk_firmware/pull/18262))
+* Rename keyboards with uppercase letters ([#18268](https://github.com/qmk/qmk_firmware/pull/18268))
+* Remove legacy USE_SERIAL define ([#18292](https://github.com/qmk/qmk_firmware/pull/18292))
+* Resolve conflict merging master to develop ([#18297](https://github.com/qmk/qmk_firmware/pull/18297))
+* Remove legacy define USE_SERIAL_PD2 ([#18298](https://github.com/qmk/qmk_firmware/pull/18298))
+* Remove legacy define SERIAL_USE_MULTI_TRANSACTION ([#18299](https://github.com/qmk/qmk_firmware/pull/18299))
+* Adapt spidey3 userspace to recent unicode refactoring ([#18345](https://github.com/qmk/qmk_firmware/pull/18345))
+* Remove remaining use of terminal keys and related comment labels ([#18402](https://github.com/qmk/qmk_firmware/pull/18402))
+* Add DD mapping for LED/RGB Matrix center ([#18432](https://github.com/qmk/qmk_firmware/pull/18432))
+* develop updates for Drashna Keymaps ([#18472](https://github.com/qmk/qmk_firmware/pull/18472))
+* Remove lingering `DRIVER_LED_TOTAL` references ([#18475](https://github.com/qmk/qmk_firmware/pull/18475))
+* Remove lingering `DRIVER_LED_TOTAL` references ([#18594](https://github.com/qmk/qmk_firmware/pull/18594))
+* update andrebrait GMMK Pro keymap ([#18608](https://github.com/qmk/qmk_firmware/pull/18608))
+* AnnePro2: Adjust RGB flushing ([#18640](https://github.com/qmk/qmk_firmware/pull/18640))
+* Remove lingering `DRIVER_LED_TOTAL` references ([#18662](https://github.com/qmk/qmk_firmware/pull/18662))
+* Update snowe's KC_RESET to use QK_BOOT ([#18667](https://github.com/qmk/qmk_firmware/pull/18667))
+* Remove some .gitignore files ([#18689](https://github.com/qmk/qmk_firmware/pull/18689))
+* Remove keymaps that still reference legacy macros ([#18690](https://github.com/qmk/qmk_firmware/pull/18690))
+* Remove keymaps that still reference legacy macros ([#18693](https://github.com/qmk/qmk_firmware/pull/18693))
+* Remove stale userspace/keymaps ([#18700](https://github.com/qmk/qmk_firmware/pull/18700))
+* Update keyboards readme ([#18714](https://github.com/qmk/qmk_firmware/pull/18714))
+* Allow changes to the moonlander default music map ([#18715](https://github.com/qmk/qmk_firmware/pull/18715))
+* led_update_kb -> led_update_ports where appropriate ([#18716](https://github.com/qmk/qmk_firmware/pull/18716))
+* Update converter/usb_usb user keymaps to use LAYOUT_fullsize ([#18720](https://github.com/qmk/qmk_firmware/pull/18720))
+* Remove RGBLIGHT_ANIMATION and clean up effect defines for G-K ([#18726](https://github.com/qmk/qmk_firmware/pull/18726))
+* Remove RGBLIGHT_ANIMATION and clean up effect defines for L-Q ([#18727](https://github.com/qmk/qmk_firmware/pull/18727))
+* Remove RGBLIGHT_ANIMATION and clean up effect defines for R-Z ([#18728](https://github.com/qmk/qmk_firmware/pull/18728))
+* Remove RGBLIGHT_ANIMATION and clean up effect defines for layouts+users ([#18729](https://github.com/qmk/qmk_firmware/pull/18729))
+* Update info.json configs to explicitly list RGBLIGHT animations ([#18730](https://github.com/qmk/qmk_firmware/pull/18730))
+* A little personal cleanup after #18726 and #18729 ([#18734](https://github.com/qmk/qmk_firmware/pull/18734))
+* Move Hillside out of handwired ([#18751](https://github.com/qmk/qmk_firmware/pull/18751))
+* wilba_tech: allow keymaps to override backlight_effect_indicators() ([#18791](https://github.com/qmk/qmk_firmware/pull/18791))
+* Remove broken userspace and keymaps ([#18806](https://github.com/qmk/qmk_firmware/pull/18806))
+* Add support for KBDfans Odin V2 ([#18910](https://github.com/qmk/qmk_firmware/pull/18910))
+* Remove more `UNUSED_PINS` defines ([#18940](https://github.com/qmk/qmk_firmware/pull/18940))
+* Remove hardcoded VIA keycode range ([#18956](https://github.com/qmk/qmk_firmware/pull/18956))
+* KC_GESC -> QK_GESC, better alignment for OCD ([#19018](https://github.com/qmk/qmk_firmware/pull/19018))
+* Add missing `manufacturer` fields ([#19065](https://github.com/qmk/qmk_firmware/pull/19065))
+* Update use of legacy keycodes ([#19120](https://github.com/qmk/qmk_firmware/pull/19120))
+
+Keyboard fixes:
+* [GMMK Pro] Fix unintentional taps to the volume keys when using the encoder ([#17129](https://github.com/qmk/qmk_firmware/pull/17129))
+* Luna keyboard pet OLED timeout fix ([#17189](https://github.com/qmk/qmk_firmware/pull/17189))
+* Handle escaping of manufacturer/product strings ([#18194](https://github.com/qmk/qmk_firmware/pull/18194))
+* kegen/gboy: add manufacturer string ([#18196](https://github.com/qmk/qmk_firmware/pull/18196))
+* Ensure all keyboards have a bootloader set ([#18234](https://github.com/qmk/qmk_firmware/pull/18234))
+* Reverse keymap search order ([#18449](https://github.com/qmk/qmk_firmware/pull/18449))
+* Fixup cradio bootloader/processor ([#18477](https://github.com/qmk/qmk_firmware/pull/18477))
+* onekey: enable ADC for Bluepill and Blackpill ([#18545](https://github.com/qmk/qmk_firmware/pull/18545))
+* Fixup controllerworks/mini42 ([#18553](https://github.com/qmk/qmk_firmware/pull/18553))
+* RESET -> QK_BOOT user keymaps ([#18560](https://github.com/qmk/qmk_firmware/pull/18560))
+* Fixup linworks/fave84h ([#18593](https://github.com/qmk/qmk_firmware/pull/18593))
+* Fix compilation of 1upkeyboards on develop ([#18618](https://github.com/qmk/qmk_firmware/pull/18618))
+* Various keyboard fixes ([#18649](https://github.com/qmk/qmk_firmware/pull/18649))
+* Fixup twig50 ([#18651](https://github.com/qmk/qmk_firmware/pull/18651))
+* Fixup handwired/jopr — remove deprecated keycode ([#18668](https://github.com/qmk/qmk_firmware/pull/18668))
+* Fixup keychron/q3 ([#18687](https://github.com/qmk/qmk_firmware/pull/18687))
+* Fixup dumbpad/v3x ([#18692](https://github.com/qmk/qmk_firmware/pull/18692))
+* Fix aurora/sweep ([#18701](https://github.com/qmk/qmk_firmware/pull/18701))
+* Fix build failures uncovered by #18753 ([#18789](https://github.com/qmk/qmk_firmware/pull/18789))
+* Fixup emptystring/nqg ([#18804](https://github.com/qmk/qmk_firmware/pull/18804))
+* Fixup controllerwords/mini36 ([#18840](https://github.com/qmk/qmk_firmware/pull/18840))
+* Fixup 1upkeyboards/pi60_rgb ([#18858](https://github.com/qmk/qmk_firmware/pull/18858))
+* Fixup doio/kb16 ([#18859](https://github.com/qmk/qmk_firmware/pull/18859))
+* Fixup keebio/sinc/rev3 ([#18866](https://github.com/qmk/qmk_firmware/pull/18866))
+* elephant42: fix default keymap ([#18884](https://github.com/qmk/qmk_firmware/pull/18884))
+* Properly fix elephant42 ([#18908](https://github.com/qmk/qmk_firmware/pull/18908))
+* Fix syntax error introduced in #18800 ([#18933](https://github.com/qmk/qmk_firmware/pull/18933))
+* Resolve info.json/rules.mk feature conflicts in three boards ([#18942](https://github.com/qmk/qmk_firmware/pull/18942))
+* Fix DD warnings for RGBKB boards ([#18944](https://github.com/qmk/qmk_firmware/pull/18944))
+* Fix "no matrix definition" errors for some boards ([#18954](https://github.com/qmk/qmk_firmware/pull/18954))
+* LED config fixes ([#18973](https://github.com/qmk/qmk_firmware/pull/18973))
+* `handwired/swiftrax/walter`: fix layout mismatch ([#18974](https://github.com/qmk/qmk_firmware/pull/18974))
+* Fix use of shifted custom keycode ([#18978](https://github.com/qmk/qmk_firmware/pull/18978))
+* `pizzakeyboards/pizza65`: fix layouts ([#18979](https://github.com/qmk/qmk_firmware/pull/18979))
+* `cannonkeys/db60/hotswap`: fix layouts ([#18982](https://github.com/qmk/qmk_firmware/pull/18982))
+* `handwired/swiftrax/cowfish`: fix layouts ([#18984](https://github.com/qmk/qmk_firmware/pull/18984))
+* Fixup hotdox76v2 on develop ([#18991](https://github.com/qmk/qmk_firmware/pull/18991))
+* `mechlovin/adelais/standard_led/avr/rev1`: fix layout ([#18997](https://github.com/qmk/qmk_firmware/pull/18997))
+* `gboards/gergoplex`: fix matrix pins ([#18999](https://github.com/qmk/qmk_firmware/pull/18999))
+* Fixup keychron/q1/iso_encoder ([#19006](https://github.com/qmk/qmk_firmware/pull/19006))
+* Rollback unrelated changes from previous PR. ([#19015](https://github.com/qmk/qmk_firmware/pull/19015))
+* Fixup bn006 on develop ([#19029](https://github.com/qmk/qmk_firmware/pull/19029))
+* onekey: disable NKRO and mousekeys by default ([#19038](https://github.com/qmk/qmk_firmware/pull/19038))
+* Fix up laser_ninja/pumpkin_pad ([#19060](https://github.com/qmk/qmk_firmware/pull/19060))
+* Fixup keychron/q6 ([#19066](https://github.com/qmk/qmk_firmware/pull/19066))
+* Fixup handwired/alcor_dactyl ([#19072](https://github.com/qmk/qmk_firmware/pull/19072))
+* Fix some old keycodes ([#19086](https://github.com/qmk/qmk_firmware/pull/19086))
+* Update more `DRIVER_LED_TOTAL` defines to `RGB_MATRIX_LED_COUNT` ([#19089](https://github.com/qmk/qmk_firmware/pull/19089))
+* Fix references to `mouse_report_t` (which doesnt exist) ([#19107](https://github.com/qmk/qmk_firmware/pull/19107))
+* Fixup keychron/q5 ([#19119](https://github.com/qmk/qmk_firmware/pull/19119))
+* Fixup aeboards/satellite ([#19137](https://github.com/qmk/qmk_firmware/pull/19137))
+* Fixup aurora/corne on develop ([#19144](https://github.com/qmk/qmk_firmware/pull/19144))
+* Minor lint fixes for various info.json ([#19146](https://github.com/qmk/qmk_firmware/pull/19146))
+
+Others:
+* Add DD mapping for LED/RGB Matrix max brightness ([#18403](https://github.com/qmk/qmk_firmware/pull/18403))
+* Add DD mapping for LED/RGB Matrix split count ([#18408](https://github.com/qmk/qmk_firmware/pull/18408))
+* Add DD mapping for LED/RGB Matrix HSVS steps ([#18414](https://github.com/qmk/qmk_firmware/pull/18414))
+* Remove RGBLIGHT_ANIMTION and clean up effect defines for 0-F ([#18725](https://github.com/qmk/qmk_firmware/pull/18725))
+* Merge API update workflow ([#19121](https://github.com/qmk/qmk_firmware/pull/19121))
+
+Bugs:
+* Fix layer switching from tap dances by redoing the keymap lookup ([#17935](https://github.com/qmk/qmk_firmware/pull/17935))
+* ws2812: replace RGBLED_NUM with driver-owned constant to decouple driver from RGBLEDs/RGBMATRIX defines ([#18036](https://github.com/qmk/qmk_firmware/pull/18036))
+* Prevent USB peripheral fault when restarting USB on WB32 MCUs ([#18058](https://github.com/qmk/qmk_firmware/pull/18058))
+* Fix mouse report comparison failing on shared EP (fixes KB preventing sleep) ([#18060](https://github.com/qmk/qmk_firmware/pull/18060))
+* Fix incorrect `bluetooth.driver` rules.mk mapping ([#18205](https://github.com/qmk/qmk_firmware/pull/18205))
+* Adjust `EXTRAKEY_ENABLE` ifdefs for `send_extra()` ([#18249](https://github.com/qmk/qmk_firmware/pull/18249))
+* Fix docs regarding cirque pinnacle attenuation ([#18279](https://github.com/qmk/qmk_firmware/pull/18279))
+* Avoid repeated calls to rgblight_set() in tight succession when setting lighting layers ([#18338](https://github.com/qmk/qmk_firmware/pull/18338))
+* Fix cirque tap from secondary side of split keyboard ([#18351](https://github.com/qmk/qmk_firmware/pull/18351))
+* Fix EECONFIG_KEYMAP_UPPER_BYTE init ([#18394](https://github.com/qmk/qmk_firmware/pull/18394))
+* Fix retain brightness when val is changed while a layer is active ([#18426](https://github.com/qmk/qmk_firmware/pull/18426))
+* Update Chibios to latest 21.11.2 changes for RP2040 XIP deadlock mitigation ([#18428](https://github.com/qmk/qmk_firmware/pull/18428))
+* Fix incorrect g_led_config generation ([#18431](https://github.com/qmk/qmk_firmware/pull/18431))
+* Fix Per Key LED Indicator Callbacks ([#18450](https://github.com/qmk/qmk_firmware/pull/18450))
+* Update chibios-contrib for RP2040 i2c fixes take 2 ([#18455](https://github.com/qmk/qmk_firmware/pull/18455))
+* Fix comment of CM_QUES (Colemak question mark) ([#18557](https://github.com/qmk/qmk_firmware/pull/18557))
+* ChibiOS: Fix USB bus disconnect handling ([#18566](https://github.com/qmk/qmk_firmware/pull/18566))
+* Update ChibiOS-Contrib for USB IRQ and bus handling fixes ([#18574](https://github.com/qmk/qmk_firmware/pull/18574))
+* RP2040: only clear RX FIFO for serial pio driver clear ([#18581](https://github.com/qmk/qmk_firmware/pull/18581))
+* Fix ST7565 handler deadlock ([#18609](https://github.com/qmk/qmk_firmware/pull/18609))
+* Fix/Update ChibiOS hardware ID ([#18613](https://github.com/qmk/qmk_firmware/pull/18613))
+* Fix some rp2040 hardware ID errors ([#18617](https://github.com/qmk/qmk_firmware/pull/18617))
+* Fix joystick functionality for ChibiOS and OTG (Blackpill) ([#18631](https://github.com/qmk/qmk_firmware/pull/18631))
+* fix typo in solenoid.h ([#18635](https://github.com/qmk/qmk_firmware/pull/18635))
+* Fix boundary in `RGB_MATRIX_INDICATOR_SET_COLOR` ([#18650](https://github.com/qmk/qmk_firmware/pull/18650))
+* Fix MIDI output endpoint to use the out direction ([#18654](https://github.com/qmk/qmk_firmware/pull/18654))
+* Fix mouse use within send_string ([#18659](https://github.com/qmk/qmk_firmware/pull/18659))
+* Correctly build keymap.json containing additional config ([#18766](https://github.com/qmk/qmk_firmware/pull/18766))
+* Correctly build out of tree keymap.json containing additional config ([#18775](https://github.com/qmk/qmk_firmware/pull/18775))
+* Fix garbled test output ([#18822](https://github.com/qmk/qmk_firmware/pull/18822))
+* Fix rgb_matrix_set_flags_noeeprom declaration ([#18860](https://github.com/qmk/qmk_firmware/pull/18860))
+* Add missing Space Cadet alias ([#18876](https://github.com/qmk/qmk_firmware/pull/18876))
+* Fix oled_render to render all dirty blocks. ([#18887](https://github.com/qmk/qmk_firmware/pull/18887))
+* compiler.txt: ensure file exists before comparison ([#18921](https://github.com/qmk/qmk_firmware/pull/18921))
+* Fix compilation issue with WPM ([#18965](https://github.com/qmk/qmk_firmware/pull/18965))
+* Fix keycode parameter extraction to match the new DD keycodes ([#18977](https://github.com/qmk/qmk_firmware/pull/18977))
+* Fix jump in mouse_report value when scale changes during cirque get report ([#18992](https://github.com/qmk/qmk_firmware/pull/18992))
+* Fixup WS2812 vendor driver ([#19028](https://github.com/qmk/qmk_firmware/pull/19028))
+* Add missing prototype for get_hold_on_other_key_press to resolve #18855 ([#19056](https://github.com/qmk/qmk_firmware/pull/19056))
+* Fix duplicate key in keyboard.jsonschema ([#19058](https://github.com/qmk/qmk_firmware/pull/19058))
+* Fixup `keyboard.jsonschema`. ([#19059](https://github.com/qmk/qmk_firmware/pull/19059))
+* fixed MOUSEKEY_INERTIA on AVR ([#19096](https://github.com/qmk/qmk_firmware/pull/19096))
+* Fix encoder_init call order in keyboard_init ([#19140](https://github.com/qmk/qmk_firmware/pull/19140))
+* Fixup installation procedure for different Fedora versions. ([#19159](https://github.com/qmk/qmk_firmware/pull/19159))

docs/_summary.md

@@ -76,9 +76,11 @@
 
   * Software Features
     * [Auto Shift](feature_auto_shift.md)
+    * [Autocorrect](feature_autocorrect.md)
     * [Caps Word](feature_caps_word.md)
     * [Combos](feature_combo.md)
     * [Debounce API](feature_debounce_type.md)
+    * [EEPROM](feature_eeprom.md)
     * [Key Lock](feature_key_lock.md)
     * [Key Overrides](feature_key_overrides.md)
     * [Layers](feature_layers.md)
@@ -121,7 +123,6 @@
     * [PS/2 Mouse](feature_ps2_mouse.md)
     * [Split Keyboard](feature_split_keyboard.md)
     * [Stenography](feature_stenography.md)
-    * [Thermal Printer](feature_thermal_printer.md)
     * [Velocikey](feature_velocikey.md)
 
   * Keyboard Building
@@ -135,7 +136,7 @@
   * Breaking Changes
     * [Overview](breaking_changes.md)
     * [My Pull Request Was Flagged](breaking_changes_instructions.md)
-    * [Most Recent ChangeLog](ChangeLog/20220827.md "QMK v0.18.0 - 2022 Aug 27")
+    * [Most Recent ChangeLog](ChangeLog/20221126.md "QMK v0.19.0 - 2022 Nov 26")
     * [Past Breaking Changes](breaking_changes_history.md)
 
   * C Development
@@ -170,7 +171,7 @@
       * [Early initialization](platformdev_chibios_earlyinit.md)
       * [Raspberry Pi RP2040](platformdev_rp2040.md)
       * [Proton C](platformdev_proton_c.md)
-      * [WeAct Blackpill F411](platformdev_blackpill_f411.md)
+      * [WeAct Blackpill F4x1](platformdev_blackpill_f4x1.md)
 
   * QMK Reference
     * [Contributing to QMK](contributing.md)

docs/api_docs.md

@@ -14,14 +14,14 @@ This service is an asynchronous API for compiling custom keymaps. You POST some
   "keymap": "my_awesome_keymap",
   "layout": "LAYOUT_all",
   "layers": [
-    ["KC_GRV","KC_1","KC_2","KC_3","KC_4","KC_5","KC_6","KC_7","KC_8","KC_9","KC_0","KC_MINS","KC_EQL","KC_GRV","KC_BSPC","KC_PGUP","KC_TAB","KC_Q","KC_W","KC_E","KC_R","KC_T","KC_Y","KC_U","KC_I","KC_O","KC_P","KC_LBRC","KC_RBRC","KC_BSLS","KC_PGDN","KC_CAPS","KC_A","KC_S","KC_D","KC_F","KC_G","KC_H","KC_J","KC_K","KC_L","KC_SCLN","KC_QUOT","KC_NUHS","KC_ENT","KC_LSFT","KC_NUBS","KC_Z","KC_X","KC_C","KC_V","KC_B","KC_N","KC_M","KC_COMM","KC_DOT","KC_SLSH","KC_RO","KC_RSFT","KC_UP","KC_LCTL","KC_LGUI","KC_LALT","KC_MHEN","KC_SPC","KC_SPC","KC_HENK","KC_RALT","KC_RCTL","MO(1)","KC_LEFT","KC_DOWN","KC_RIGHT"],
-    ["KC_ESC","KC_F1","KC_F2","KC_F3","KC_F4","KC_F5","KC_F6","KC_F7","KC_F8","KC_F9","KC_F10","KC_F11","KC_F12","KC_TRNS","KC_DEL","BL_STEP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","_______","KC_TRNS","KC_PSCR","KC_SLCK","KC_PAUS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_PGUP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_LEFT","KC_PGDN","KC_RGHT"],
-    ["KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","RESET","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_TRNS","KC_TRNS","KC_TRNS"]
+    ["KC_GRV","KC_1","KC_2","KC_3","KC_4","KC_5","KC_6","KC_7","KC_8","KC_9","KC_0","KC_MINS","KC_EQL","KC_GRV","KC_BSPC","KC_PGUP","KC_TAB","KC_Q","KC_W","KC_E","KC_R","KC_T","KC_Y","KC_U","KC_I","KC_O","KC_P","KC_LBRC","KC_RBRC","KC_BSLS","KC_PGDN","KC_CAPS","KC_A","KC_S","KC_D","KC_F","KC_G","KC_H","KC_J","KC_K","KC_L","KC_SCLN","KC_QUOT","KC_NUHS","KC_ENT","KC_LSFT","KC_NUBS","KC_Z","KC_X","KC_C","KC_V","KC_B","KC_N","KC_M","KC_COMM","KC_DOT","KC_SLSH","KC_INT1","KC_RSFT","KC_UP","KC_LCTL","KC_LGUI","KC_LALT","KC_INT5","KC_SPC","KC_SPC","KC_INT4","KC_RALT","KC_RCTL","MO(1)","KC_LEFT","KC_DOWN","KC_RIGHT"],
+    ["KC_ESC","KC_F1","KC_F2","KC_F3","KC_F4","KC_F5","KC_F6","KC_F7","KC_F8","KC_F9","KC_F10","KC_F11","KC_F12","KC_TRNS","KC_DEL","BL_STEP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","_______","KC_TRNS","KC_PSCR","KC_SCRL","KC_PAUS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_PGUP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_LEFT","KC_PGDN","KC_RGHT"],
+    ["KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","QK_BOOT","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_TRNS","KC_TRNS","KC_TRNS"]
   ]
 }
 ```
 
-As you can see the payload describes all aspects of a keyboard necessary to create and generate a firmware. Each layer is a single list of QMK keycodes the same length as the keyboard's `LAYOUT` macro. If a keyboard supports mulitple `LAYOUT` macros you can specify which macro to use.
+As you can see the payload describes all aspects of a keyboard necessary to create and generate a firmware. Each layer is a single list of QMK keycodes the same length as the keyboard's `LAYOUT` macro. If a keyboard supports multiple `LAYOUT` macros you can specify which macro to use.
 
 ## Submitting a Compile Job
 
@@ -66,3 +66,41 @@ Once your compile job has finished you'll check the `result` key. The value of t
 * `firmware_keymap_url`: A list of URLs for the `keymap.c`
 * `firmware_source_url`: A list of URLs for the full firmware source code
 * `output`: The stdout and stderr for this compile job. Errors will be found here.
+
+## Constants :id=qmk-constants
+
+If you're writing a tool that leverages constants used within QMK, the API is used to publish "locked-in" versions of those constants in order to ensure that any third-party tooling has a canonical set of information to work with.
+
+The list of available constants can be retrieved by accessing one of the following endpoints:
+
+```
+$ curl https://keyboards.qmk.fm/v1/constants_metadata.json # For `master`
+{"last_updated": "2022-11-26 00:00:00 GMT", "constants": {"keycodes": ["0.0.1"]}}
+
+$ curl https://keyboards.develop.qmk.fm/v1/constants_metadata.json # For `develop`
+{"last_updated": "2022-11-26 12:00:00 GMT", "constants": {"keycodes": ["0.0.1", "0.0.2"]}}
+```
+
+!> Versions exported by the `master` endpoint are locked-in. Any extra versions that exist on the `develop` endpoint which don't exist in `master` are subject to change.
+
+?> Only keycodes are currently published, but over time all other "externally visible" IDs are expected to appear on these endpoints.
+
+To retrieve the constants associated with a subsystem, the endpoint format is as follows:
+```
+# https://keyboards.qmk.fm/v1/constants/{subsystem}_{version}.json
+```
+Which, for the metadata endpoint above results in a request of:
+```
+$ curl https://keyboards.qmk.fm/v1/constants/keycodes_0.0.1.json
+{
+    "ranges": {
+        "0x0000/0x00FF": {
+            "define": "QK_BASIC"
+        },
+        "0x0100/0x1EFF": {
+            "define": "QK_MODS"
+        },
+        "0x2000/0x1FFF": {
+            "define": "QK_MOD_TAP"
+<snip>
+```

docs/audio_driver.md

@@ -159,7 +159,6 @@ A configuration example for the STM32F103C8 would be:
 //halconf.h:
 #define HAL_USE_PWM                 TRUE
 #define HAL_USE_PAL                 TRUE
-#define HAL_USE_GPT                 TRUE
 #include_next <halconf.h>
 ```
 
@@ -168,8 +167,6 @@ A configuration example for the STM32F103C8 would be:
 #include_next <mcuconf.h>
 #undef STM32_PWM_USE_TIM1
 #define STM32_PWM_USE_TIM1                  TRUE
-#undef STM32_GPT_USE_TIM4
-#define STM32_GPT_USE_TIM4                  TRUE
 ```
 
 If we now target pin A8, looking through the data-sheet of the STM32F103C8, for the timers and alternate functions
@@ -184,7 +181,6 @@ with all this information, the configuration would contain these lines:
 #define AUDIO_PIN A8
 #define AUDIO_PWM_DRIVER PWMD1
 #define AUDIO_PWM_CHANNEL 1
-#define AUDIO_STATE_TIMER GPTD4
 ```
 
 ChibiOS uses GPIOv1 for the F103, which only knows of one alternate function.
@@ -207,15 +203,15 @@ You can also change the timer used for software PWM by defining the driver.  For
 
 While not an exhaustive list, the following table provides the scenarios that have been partially validated:
 
-|                          | DAC basic          | DAC additive       | PWM hardware       | PWM software       |
-|--------------------------|--------------------|--------------------|--------------------|--------------------|
+|                          |     DAC basic      |    DAC additive    |    PWM hardware    |    PWM software    |
+| ------------------------ | ------------------ | ------------------ | ------------------ | ------------------ |
 | Atmega32U4               | :o:                | :o:                | :heavy_check_mark: | :o:                |
+| RP2040                   | :x:                | :x:                | :heavy_check_mark: | ?                  |
 | STM32F103C8 (bluepill)   | :x:                | :x:                | :heavy_check_mark: | :heavy_check_mark: |
 | STM32F303CCT6 (proton-c) | :heavy_check_mark: | :heavy_check_mark: | ?                  | :heavy_check_mark: |
 | STM32F405VG              | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | L0xx                     | :x: (no Tim8)      | ?                  | ?                  | ?                  |
 
-
 :heavy_check_mark: : works and was tested  
 :o: : does not apply  
 :x: : not supported by MCU

docs/breaking_changes.md

@@ -8,6 +8,7 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## What has been included in past Breaking Changes?
 
+* [2022 Nov 26](ChangeLog/20221126.md)
 * [2022 Aug 27](ChangeLog/20220827.md)
 * [2022 May 28](ChangeLog/20220528.md)
 * [2022 Feb 26](ChangeLog/20220226.md)
@@ -23,18 +24,18 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for November 26, 2022.
+The next Breaking Change is scheduled for February 26, 2023.
 
 ### Important Dates
 
-* 2022 Aug 27 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
-* 2022 Oct 29 - `develop` closed to new PR's.
-* 2022 Oct 29 - Call for testers.
-* 2022 Nov 12 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes
-* 2022 Nov 19 - `develop` is locked, only critical bugfix PR's merged.
-* 2022 Nov 24 - `master` is locked, no PR's merged.
-* 2022 Nov 26 - Merge `develop` to `master`.
-* 2022 Nov 26 - `master` is unlocked. PR's can be merged again.
+* 2022 Nov 26 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
+* 2022 Jan 29 - `develop` closed to new PR's.
+* 2022 Jan 29 - Call for testers.
+* 2022 Feb 12 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes
+* 2022 Feb 19 - `develop` is locked, only critical bugfix PR's merged.
+* 2022 Feb 24 - `master` is locked, no PR's merged.
+* 2022 Feb 26 - Merge `develop` to `master`.
+* 2023 Feb 26 - `master` is unlocked. PR's can be merged again.
 
 ## What changes will be included?
 

docs/breaking_changes_history.md

@@ -2,6 +2,7 @@
 
 This page links to all previous changelogs from the QMK Breaking Changes process.
 
+* [2022 Nov 26](ChangeLog/20221126.md) - version 0.19.0
 * [2022 Aug 27](ChangeLog/20220827.md) - version 0.18.0
 * [2022 May 28](ChangeLog/20220528.md) - version 0.17.0
 * [2022 Feb 26](ChangeLog/20220226.md) - version 0.16.0

docs/cli_commands.md

@@ -223,7 +223,7 @@ Check your environment and report problems only:
 
 ## `qmk format-json`
 
-Formats a JSON file in a (mostly) human-friendly way. Will usually correctly detect the format of the JSON (info.json or keymap.json) but you can override this with `--format` if neccesary.
+Formats a JSON file in a (mostly) human-friendly way. Will usually correctly detect the format of the JSON (info.json or keymap.json) but you can override this with `--format` if necessary.
 
 **Usage**:
 

docs/cli_development.md

@@ -162,7 +162,7 @@ del(cli.config.<section>.<key>)
 
 ## Writing The Configuration File
 
-The configuration is not written out when it is changed. Most commands do not need to do this. We prefer to have the user change their configuration deliberitely using `qmk config`.
+The configuration is not written out when it is changed. Most commands do not need to do this. We prefer to have the user change their configuration deliberately using `qmk config`.
 
 You can use `cli.save_config()` to write out the configuration.
 

docs/coding_conventions_c.md

@@ -24,7 +24,7 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely
   * Readability is more important than consistency.
   * Follow the file's existing style. If the file is mixed, follow the style that makes sense for the section you are modifying.
   * When indenting, keep the hash at the start of the line and add whitespace between `#` and `if`, starting with 4 spaces after the `#`.
-  * You can follow the indention level of the surrounding C code, or preprocessor directives can have their own indentation levels. Choose the style that best communicates the intent of your code.
+  * You can follow the indentation level of the surrounding C code, or preprocessor directives can have their own indentation levels. Choose the style that best communicates the intent of your code.
 
 Here is an example for easy reference:
 

docs/coding_conventions_python.md

@@ -2,7 +2,7 @@
 
 Most of our style follows PEP8 with some local modifications to make things less nit-picky. 
 
-* We target Python 3.7 for compatability with all supported platforms.
+* We target Python 3.7 for compatibility with all supported platforms.
 * We indent using four (4) spaces (soft tabs)
 * We encourage liberal use of comments
   * Think of them as a story describing the feature
@@ -21,7 +21,7 @@ You can use [yapf](https://github.com/google/yapf) to style your code. We provid
 
 We don't have a hard and fast rule for when to use `import ...` vs `from ... import ...`. Understandability and maintainability is our ultimate goal.
 
-Generally we prefer to import specific function and class names from a module to keep code shorter and easier to understand. Sometimes this results in a name that is ambiguous, and in such cases we prefer to import the module instead. You should avoid using the "as" keyword when importing, unless you are importing a compatability module.
+Generally we prefer to import specific function and class names from a module to keep code shorter and easier to understand. Sometimes this results in a name that is ambiguous, and in such cases we prefer to import the module instead. You should avoid using the "as" keyword when importing, unless you are importing a compatibility module.
 
 Imports should be one line per module. We group import statements together using the standard python rules- system, 3rd party, local.
 

docs/config_options.md

@@ -2,7 +2,17 @@
 
 QMK is nearly infinitely configurable. Wherever possible we err on the side of allowing users to customize their keyboard, even at the expense of code size. That level of flexibility makes for a daunting configuration experience, however.
 
-There are two main types of configuration files in QMK- `config.h` and `rules.mk`. These files exist at various levels in QMK and all files of the same type are combined to build the final configuration. The levels, from lowest priority to highest priority, are:
+There are three main types of configuration files in QMK:
+
+* `config.h`, which contains various preprocessor directives (`#define`, `#ifdef`)
+* `rules.mk`, which contains additional variables
+* `info.json`, which is utilized for [data-driven configuration](https://docs.qmk.fm/#/data_driven_config)
+
+This page will only discuss the first two types, `config.h` and `rules.mk`.
+
+?> While not all settings have data-driven equivalents yet, keyboard makers are encouraged to utilize the `info.json` file to set the metadata for their boards when possible. See the [`info.json` Format](https://docs.qmk.fm/#/reference_info_json) page for more details.
+
+These files exist at various levels in QMK and all files of the same type are combined to build the final configuration. The levels, from lowest priority to highest priority, are:
 
 * QMK Default
 * Keyboard
@@ -39,11 +49,11 @@ This is a C header file that is one of the first things included, and will persi
   * defines your VID, and for most DIY projects, can be whatever you want
 * `#define PRODUCT_ID 0x5678`
   * defines your PID, and for most DIY projects, can be whatever you want
-* `#define DEVICE_VER 0`
+* `#define DEVICE_VER 0x0100`
   * defines the device version (often used for revisions)
-* `#define MANUFACTURER Me`
+* `#define MANUFACTURER "Me"`
   * generally who/whatever brand produced the board
-* `#define PRODUCT Board`
+* `#define PRODUCT "Board"`
   * the name of the keyboard
 * `#define MATRIX_ROWS 5`
   * the number of rows in your keyboard's matrix
@@ -185,7 +195,7 @@ If you define these options you will enable the associated feature, which may in
 * `#define COMBO_TERM 200`
   * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
 * `#define COMBO_MUST_HOLD_MODS`
-  * Flag for enabling extending timeout on Combos containing modifers
+  * Flag for enabling extending timeout on Combos containing modifiers
 * `#define COMBO_MOD_TERM 200`
   * Allows for extending COMBO_TERM for mod keys while mid-combo.
 * `#define COMBO_MUST_HOLD_PER_COMBO`
@@ -197,7 +207,7 @@ If you define these options you will enable the associated feature, which may in
 * `#define COMBO_NO_TIMER`
   * Disable the combo timer completely for relaxed combos.
 * `#define TAP_CODE_DELAY 100`
-  * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
+  * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds and defaults to `0`.
 * `#define TAP_HOLD_CAPS_DELAY 80`
   * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPS_LOCK` keycode, as this has some special handling on MacOS.  The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher.
 * `#define KEY_OVERRIDE_REPEAT_DELAY 500`
@@ -315,6 +325,13 @@ There are a few different ways to set handedness for split keyboards (listed in
 
 * `#define SPLIT_USB_TIMEOUT_POLL 10`
   * Poll frequency when detecting master/slave when using `SPLIT_USB_DETECT`
+  
+* `#define SPLIT_WATCHDOG_ENABLE`
+  * Reboot slave if no communication from master within timeout.
+  * Helps resolve issue where both sides detect as slave using `SPLIT_USB_DETECT`
+
+* `#define SPLIT_WATCHDOG_TIMEOUT 3000`
+  * Maximum slave timeout when waiting for communication from master when using `SPLIT_WATCHDOG_ENABLE`
 
 * `#define FORCED_SYNC_THROTTLE_MS 100`
   * Deadline for synchronizing data from master to slave when using the QMK-provided split transport.

docs/configurator_default_keymaps.md

@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [1] = LAYOUT_all(
     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI,             BL_TOGG, BL_DEC,  BL_INC,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_VOLU,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,             KC_MPLY, KC_MNXT, KC_VOLD,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,             KC_MPLY, KC_MNXT, KC_VOLD,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                      KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS, KC_TRNS, KC_TRNS),
@@ -84,7 +84,7 @@ The default keymap uses the `LAYOUT_all` macro, so that will be the value of the
     [
       "KC_TRNS",            "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "RGB_TOG", "RGB_MOD", "RGB_HUD", "RGB_HUI", "RGB_SAD", "RGB_SAI", "RGB_VAD", "RGB_VAI",               "BL_TOGG", "BL_DEC",  "BL_INC",
       "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",    "KC_TRNS", "KC_TRNS", "KC_VOLU",
-      "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "RESET",   "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",               "KC_MPLY", "KC_MNXT", "KC_VOLD",
+      "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "QK_BOOT", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",               "KC_MPLY", "KC_MNXT", "KC_VOLD",
       "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",
       "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",                          "KC_TRNS",
       "KC_TRNS", "KC_TRNS", "KC_TRNS",                                  "KC_TRNS",                                  "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",               "KC_TRNS", "KC_TRNS", "KC_TRNS"
@@ -122,26 +122,26 @@ There is a way to support custom keycodes: if the logic for a custom keycode is
 
 ```c
 enum custom_keycodes {
-    MACRO_1 = SAFE_RANGE,
-    MACRO_2,
-    MACRO_3
+    CUSTOM_1 = SAFE_RANGE,
+    CUSTOM_2,
+    CUSTOM_3
 };
 ...
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     switch(keycode) {
-        case MACRO_1:
+        case CUSTOM_1:
             if (record->event.pressed) {
-                SEND_STRING("This is macro #1.");
+                SEND_STRING("This is custom keycode #1.");
             }
             return false;
-        case MACRO_2:
+        case CUSTOM_2:
             if (record->event.pressed) {
-                SEND_STRING("This is macro #2.");
+                SEND_STRING("This is custom keycode #2.");
             }
             return false;
-        case MACRO_3:
+        case CUSTOM_3:
             if (record->event.pressed) {
-                SEND_STRING("This is macro #3.");
+                SEND_STRING("This is custom keycode #3.");
             }
             return false;
     }
@@ -153,9 +153,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
 ```c
 enum keyboard_keycodes {
-    MACRO_1 = SAFE_RANGE,
-    MACRO_2,
-    MACRO_3,
+    CUSTOM_1 = SAFE_RANGE,
+    CUSTOM_2,
+    CUSTOM_3,
     NEW_SAFE_RANGE  // Important!
 };
 ```
@@ -165,19 +165,19 @@ enum keyboard_keycodes {
 ```c
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
     switch(keycode) {
-        case MACRO_1:
+        case CUSTOM_1:
             if (record->event.pressed) {
-                SEND_STRING("This is macro #1.");
+                SEND_STRING("This is custom keycode #1.");
             }
             return false;
-        case MACRO_2:
+        case CUSTOM_2:
             if (record->event.pressed) {
-                SEND_STRING("This is macro #2.");
+                SEND_STRING("This is custom keycode #2.");
             }
             return false;
-        case MACRO_3:
+        case CUSTOM_3:
             if (record->event.pressed) {
-                SEND_STRING("This is macro #3.");
+                SEND_STRING("This is custom keycode #3.");
             }
             return false;
     }

docs/custom_quantum_functions.md

@@ -102,11 +102,11 @@ These are the three main initialization functions, listed in the order that they
 
 ## Keyboard Pre Initialization code
 
-This runs very early during startup, even before the USB has been started. 
+This runs very early during startup, even before the USB has been started.
 
 Shortly after this, the matrix is initialized.
 
-For most users, this shouldn't be used, as it's primarily for hardware oriented initialization. 
+For most users, this shouldn't be used, as it's primarily for hardware oriented initialization.
 
 However, if you have hardware stuff that you need initialized, this is the best place for it (such as initializing LED pins).
 
@@ -134,9 +134,9 @@ void keyboard_pre_init_user(void) {
 
 ## Matrix Initialization Code
 
-This is called when the matrix is initialized, and after some of the hardware has been set up, but before many of the features have been initialized. 
+This is called when the matrix is initialized, and after some of the hardware has been set up, but before many of the features have been initialized.
 
-This is useful for setting up stuff that you may need elsewhere, but isn't hardware related nor is dependant on where it's started. 
+This is useful for setting up stuff that you may need elsewhere, but isn't hardware related nor is dependant on where it's started.
 
 
 ### `matrix_init_*` Function Documentation
@@ -227,185 +227,6 @@ void suspend_wakeup_init_user(void) {
 * Keyboard/Revision: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
 * Keymap: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
 
-# Layer Change Code :id=layer-change-code
-
-This runs code every time that the layers get changed.  This can be useful for layer indication, or custom layer handling.
-
-### Example `layer_state_set_*` Implementation
-
-This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example.
-
-```c
-layer_state_t layer_state_set_user(layer_state_t state) {
-    switch (get_highest_layer(state)) {
-    case _RAISE:
-        rgblight_setrgb (0x00,  0x00, 0xFF);
-        break;
-    case _LOWER:
-        rgblight_setrgb (0xFF,  0x00, 0x00);
-        break;
-    case _PLOVER:
-        rgblight_setrgb (0x00,  0xFF, 0x00);
-        break;
-    case _ADJUST:
-        rgblight_setrgb (0x7A,  0x00, 0xFF);
-        break;
-    default: //  for any other layers, or the default layer
-        rgblight_setrgb (0x00,  0xFF, 0xFF);
-        break;
-    }
-  return state;
-}
-```
-
-Use the `IS_LAYER_ON_STATE(state, layer)` and `IS_LAYER_OFF_STATE(state, layer)` macros to check the status of a particular layer.
-
-Outside of `layer_state_set_*` functions, you can use the `IS_LAYER_ON(layer)` and `IS_LAYER_OFF(layer)` macros to check global layer state.
-
-### `layer_state_set_*` Function Documentation
-
-* Keyboard/Revision: `layer_state_t layer_state_set_kb(layer_state_t state)`
-* Keymap: `layer_state_t layer_state_set_user(layer_state_t state)`
-
-
-The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)
-
-
-# Persistent Configuration (EEPROM)
-
-This allows you to configure persistent settings for your keyboard.  These settings are stored in the EEPROM of your controller, and are retained even after power loss. The settings can be read with `eeconfig_read_kb` and `eeconfig_read_user`, and can be written to using `eeconfig_update_kb` and `eeconfig_update_user`. This is useful for features that you want to be able to toggle (like toggling rgb layer indication).  Additionally, you can use `eeconfig_init_kb` and `eeconfig_init_user` to set the default values for the EEPROM. 
-
-The complicated part here, is that there are a bunch of ways that you can store and access data via EEPROM, and there is no "correct" way to do this.  However, you only have a DWORD (4 bytes) for each function.
-
-Keep in mind that EEPROM has a limited number of writes. While this is very high, it's not the only thing writing to the EEPROM, and if you write too often, you can potentially drastically shorten the life of your MCU.
-
-* If you don't understand the example, then you may want to avoid using this feature, as it is rather complicated. 
-
-### Example Implementation
-
-This is an example of how to add settings, and read and write it. We're using the user keymap for the example here.  This is a complex function, and has a lot going on.  In fact, it uses a lot of the above functions to work! 
-
-
-In your keymap.c file, add this to the top:
-```c
-typedef union {
-  uint32_t raw;
-  struct {
-    bool     rgb_layer_change :1;
-  };
-} user_config_t;
-
-user_config_t user_config;
-```
-
-This sets up a 32 bit structure that we can store settings with in memory, and write to the EEPROM. Using this removes the need to define variables, since they're defined in this structure. Remember that `bool` (boolean) values use 1 bit, `uint8_t` uses 8 bits, `uint16_t` uses up 16 bits.  You can mix and match, but changing the order can cause issues, as it will change the values that are read and written. 
-
-We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `keyboard_post_init_user` and `process_record_user` to configure everything. 
-
-Now, using the `keyboard_post_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap.  And It should look like: 
-```c
-void keyboard_post_init_user(void) {
-  // Call the keymap level matrix init.
-
-  // Read the user config from EEPROM
-  user_config.raw = eeconfig_read_user();
-
-  // Set default layer, if enabled
-  if (user_config.rgb_layer_change) {
-    rgblight_enable_noeeprom();
-    rgblight_sethsv_noeeprom_cyan();
-    rgblight_mode_noeeprom(1);
-  }
-}
-```
-The above function will use the EEPROM config immediately after reading it, to set the default layer's RGB color. The "raw" value of it is converted in a usable structure based on the "union" that you created above. 
-
-```c
-layer_state_t layer_state_set_user(layer_state_t state) {
-    switch (get_highest_layer(state)) {
-    case _RAISE:
-        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); }
-        break;
-    case _LOWER:
-        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_red(); rgblight_mode_noeeprom(1); }
-        break;
-    case _PLOVER:
-        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_green(); rgblight_mode_noeeprom(1); }
-        break;
-    case _ADJUST:
-        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_white(); rgblight_mode_noeeprom(1); }
-        break;
-    default: //  for any other layers, or the default layer
-        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_cyan(); rgblight_mode_noeeprom(1); }
-        break;
-    }
-  return state;
-}
-```
-This will cause the RGB underglow to be changed ONLY if the value was enabled.  Now to configure this value, create a new keycode for `process_record_user` called `RGB_LYR`. Additionally, we want to make sure that if you use the normal RGB codes, that it turns off  Using the example above, make it look this:
-```c
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case FOO:
-      if (record->event.pressed) {
-        // Do something when pressed
-      } else {
-        // Do something else when release
-      }
-      return false; // Skip all further processing of this key
-    case KC_ENTER:
-        // Play a tone when enter is pressed
-        if (record->event.pressed) {
-            PLAY_SONG(tone_qwerty);
-        }
-        return true; // Let QMK send the enter press/release events
-    case RGB_LYR:  // This allows me to use underglow as layer indication, or as normal
-        if (record->event.pressed) {
-            user_config.rgb_layer_change ^= 1; // Toggles the status
-            eeconfig_update_user(user_config.raw); // Writes the new status to EEPROM
-            if (user_config.rgb_layer_change) { // if layer state indication is enabled,
-                layer_state_set(layer_state);   // then immediately update the layer color
-            }
-        }
-        return false;
-    case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // For any of the RGB codes (see quantum_keycodes.h, L400 for reference)
-        if (record->event.pressed) { //This disables layer indication, as it's assumed that if you're changing this ... you want that disabled
-            if (user_config.rgb_layer_change) {        // only if this is enabled
-                user_config.rgb_layer_change = false;  // disable it, and
-                eeconfig_update_user(user_config.raw); // write the setings to EEPROM
-            }
-        }
-        return true; break;
-    default:
-      return true; // Process all other keycodes normally
-  }
-}
-```
-And lastly, you want to add the `eeconfig_init_user` function, so that when the EEPROM is reset, you can specify default values, and even custom actions. To force an EEPROM reset, use the `EEP_RST` keycode or [Bootmagic Lite](feature_bootmagic.md) functionallity. For example, if you want to set rgb layer indication by default, and save the default valued.
-
-```c
-void eeconfig_init_user(void) {  // EEPROM is getting reset!
-  user_config.raw = 0;
-  user_config.rgb_layer_change = true; // We want this enabled by default
-  eeconfig_update_user(user_config.raw); // Write default value to EEPROM now
-
-  // use the non noeeprom versions, to write these values to EEPROM too
-  rgblight_enable(); // Enable RGB by default
-  rgblight_sethsv_cyan();  // Set it to CYAN by default
-  rgblight_mode(1); // set to solid by default
-}
-```
-
-And you're done.  The RGB layer indication will only work if you want it to. And it will be saved, even after unplugging the board. And if you use any of the RGB codes, it will disable the layer indication, so that it stays on the mode and color that you set it to. 
-
-### 'EECONFIG' Function Documentation
-
-* Keyboard/Revision: `void eeconfig_init_kb(void)`, `uint32_t eeconfig_read_kb(void)` and `void eeconfig_update_kb(uint32_t val)`
-* Keymap: `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)` and `void eeconfig_update_user(uint32_t val)`
-
-The `val` is the value of the data that you want to write to EEPROM.  And the `eeconfig_read_*` function return a 32 bit (DWORD) value from the EEPROM. 
-
 # Deferred Execution :id=deferred-execution
 
 QMK has the ability to execute a callback after a specified period of time, rather than having to manually manage timers. To enable this functionality, set `DEFERRED_EXEC_ENABLE = yes` in rules.mk.
@@ -471,3 +292,15 @@ If registrations fail, then you can increase this value in your keyboard or keym
 ```c
 #define MAX_DEFERRED_EXECUTORS 16
 ```
+
+# Advanced topics :id=advanced-topics
+
+This page used to encompass a large set of features. We have moved many sections that used to be part of this page to their own pages. Everything below this point is simply a redirect so that people following old links on the web find what they're looking for.
+
+## Layer Change Code :id=layer-change-code
+
+[Layer change code](feature_layers.md#layer-change-code)
+
+## Persistent Configuration (EEPROM) :id=persistent-configuration-eeprom
+
+[Persistent Configuration (EEPROM)](feature_eeprom.md)

docs/data_driven_config.md

@@ -41,7 +41,7 @@ In other cases you should group like options together in an `object`. This is pa
 
 ### Add a mapping
 
-In most cases you can add a simple mapping. These are maintained as JSON files in `data/mappings/info_config.json` and `data/mappings/info_rules.json`, and control mapping for `config.h` and `rules.mk`, respectively. Each mapping is keyed by the `config.h` or `rules.mk` variable, and the value is a hash with the following keys:
+In most cases you can add a simple mapping. These are maintained as JSON files in `data/mappings/info_config.hjson` and `data/mappings/info_rules.hjson`, and control mapping for `config.h` and `rules.mk`, respectively. Each mapping is keyed by the `config.h` or `rules.mk` variable, and the value is a hash with the following keys:
 
 * `info_key`: (required) The location within `info.json` for this value. See below.
 * `value_type`: (optional) Default `raw`. The format for this variable's value. See below.

docs/documentation_templates.md

@@ -4,7 +4,7 @@ This page documents the templates you should use when submitting new Keymaps and
 
 ## Keymap `readme.md` Template :id=keyboard-readmemd-template
 
-Most keymaps have an image depicting the layout. You can use [Keyboard Layout Editor](https://keyboard-layout-editor.com) to create an image. Upload it to [Imgur](https://imgur.com) or another hosting service, please do not include images in your Pull Request.
+Most keymaps have an image depicting the layout. You can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to create an image. Upload it to [Imgur](https://imgur.com) or another hosting service, please do not include images in your Pull Request.
 
 Below the image you should write a short description to help people understand your keymap.
 

docs/driver_installation_zadig.md

@@ -8,7 +8,7 @@ We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have
 
 ## Installation
 
-Put your keyboard into bootloader mode, either by hitting the `RESET` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic Lite](feature_bootmagic.md) docs for more details). Some boards use [Command](feature_command.md) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in.
+Put your keyboard into bootloader mode, either by hitting the `QK_BOOT` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic Lite](feature_bootmagic.md) docs for more details). Some boards use [Command](feature_command.md) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in.
 Some keyboards may have specific instructions for entering the bootloader. For example, the [Bootmagic Lite](feature_bootmagic.md) key (default: Escape) might be on a different key, e.g. Left Control; or the magic combination for Command (default: Left Shift+Right Shift) might require you to hold something else, e.g. Left Control+Right Control. Refer to the board's README file if you are unsure.
 
 To put a device in bootloader mode with USBaspLoader, tap the `RESET` button while holding down the `BOOT` button.

docs/faq_debug.md

@@ -4,7 +4,7 @@ This page details various common questions people have about troubleshooting the
 
 ## Debugging :id=debugging
 
-Your keyboard will output debug information if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
+Your keyboard will output debug information if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DB_TOGG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
 
 ```c
 void keyboard_post_init_user(void) {
@@ -133,3 +133,4 @@ Check:
 - Set `debug_enable=true`. See [Debugging](#debugging)
 - Try using `print` function instead of debug print. See **common/print.h**.
 - Disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
+- Ensure all strings end with a newline character (`\n`). QMK Toolbox prints console output on a per-line basis.

docs/faq_misc.md

@@ -10,7 +10,7 @@ You probably don't want to "brick" your keyboard, making it impossible
 to rewrite firmware onto it.  Here are some of the parameters to show
 what things are (and likely aren't) too risky.
 
-- If your keyboard map does not include RESET, then, to get into DFU
+- If your keyboard map does not include QK_BOOT, then, to get into DFU
   mode, you will need to press the reset button on the PCB, which
   requires unscrewing the bottom.
 - Messing with tmk_core / common files might make the keyboard

docs/feature_advanced_keycodes.md

@@ -161,7 +161,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 };
 ```
 
-# Legacy Content :id=legacy-content
+# Advanced topics :id=advanced-topics
 
 This page used to encompass a large set of features. We have moved many sections that used to be part of this page to their own pages. Everything below this point is simply a redirect so that people following old links on the web find what they're looking for.
 

docs/feature_audio.md

@@ -114,7 +114,7 @@ The audio core offers interface functions to get/set/change the tone multiplexin
 There's a couple of different sounds that will automatically be enabled without any other configuration:
 ```
 STARTUP_SONG // plays when the keyboard starts up (audio.c)
-GOODBYE_SONG // plays when you press the RESET key (quantum.c)
+GOODBYE_SONG // plays when you press the QK_BOOT key (quantum.c)
 AG_NORM_SONG // plays when you press AG_NORM (quantum.c)
 AG_SWAP_SONG // plays when you press AG_SWAP (quantum.c)
 CG_NORM_SONG // plays when you press CG_NORM (quantum.c)
@@ -161,9 +161,11 @@ It's advised that you wrap all audio features in `#ifdef AUDIO_ENABLE` / `#endif
 
 The available keycodes for audio are: 
 
-* `AU_ON` - Turn Audio Feature on
-* `AU_OFF` - Turn Audio Feature off
-* `AU_TOG` - Toggle Audio Feature state
+|Key                      |Aliases  |Description                                |
+|-------------------------|---------|-------------------------------------------|
+|`QK_AUDIO_ON`            |`AU_ON`  |Turns on Audio Feature                     |
+|`QK_AUDIO_OFF`           |`AU_OFF` |Turns off Audio Feature                    |
+|`QK_AUDIO_TOGGLE`        |`AU_TOGG`|Toggles Audio state                        |
 
 !> These keycodes turn all of the audio functionality on and off.  Turning it off means that audio feedback, audio clicky, music mode, etc. are disabled, completely.
 
@@ -177,7 +179,7 @@ The available keycodes for audio are:
 |`AUDIO_INIT_DELAY`               | *Not defined*        |Enables delay during startup song to accomidate for USB startup issues.        |
 |`AUDIO_ENABLE_TONE_MULTIPLEXING` | *Not defined*        |Enables time splicing/multiplexing to create multiple tones simutaneously.     |
 |`STARTUP_SONG`                   | `STARTUP_SOUND`      |Plays when the keyboard starts up (audio.c)                                    |
-|`GOODBYE_SONG`                   | `GOODBYE_SOUND`      |Plays when you press the RESET key (quantum.c)                                 |
+|`GOODBYE_SONG`                   | `GOODBYE_SOUND`      |Plays when you press the QK_BOOT key (quantum.c)                               |
 |`AG_NORM_SONG`                   | `AG_NORM_SOUND`      |Plays when you press AG_NORM (process_magic.c)                                 |
 |`AG_SWAP_SONG`                   | `AG_SWAP_SOUND`      |Plays when you press AG_SWAP (process_magic.c)                                 |
 |`CG_NORM_SONG`                   | `AG_NORM_SOUND`      |Plays when you press CG_NORM (process_magic.c)                                 |
@@ -219,6 +221,12 @@ Aka "audio effects", different ones can be enabled by setting in `config.h` thes
 `#define AUDIO_VOICES` to enable the feature, and `#define AUDIO_VOICE_DEFAULT something` to select a specific effect
 for details see quantum/audio/voices.h and .c
 
+Keycodes available:
+
+|Key                      |Aliases  |Description                                |
+|-------------------------|---------|-------------------------------------------|
+|`QK_AUDIO_VOICE_NEXT`    |`AU_NEXT`|Cycles through the audio voices            |
+|`QK_AUDIO_VOICE_PREVIOUS`|`AU_PREV`|Cycles through the audio voices in reverse |
 
 ## Music Mode
 
@@ -228,10 +236,14 @@ Recording is experimental due to some memory issues - if you experience some wei
 
 Keycodes available:
 
-* `MU_ON` - Turn music mode on
-* `MU_OFF` - Turn music mode off
-* `MU_TOG` - Toggle music mode
-* `MU_MOD` - Cycle through the music modes:
+|Key                      |Aliases  |Description                                |
+|-------------------------|---------|-------------------------------------------|
+|`QK_MUSIC_ON`            |`MU_ON`  |Turns on Music Mode                        |
+|`QK_MUSIC_OFF`           |`MU_OFF` |Turns off Music Mode                       |
+|`QK_MUSIC_TOGGLE`        |`MU_TOGG`|Toggles Music Mode                         |
+|`QK_MUSIC_MODE_NEXT`     |`MU_NEXT`|Cycles through the music modes             |
+
+Available Modes:
   * `CHROMATIC_MODE` - Chromatic scale, row changes the octave
   * `GUITAR_MODE` - Chromatic scale, but the row changes the string (+5 st)
   * `VIOLIN_MODE` - Chromatic scale, but the row changes the string (+7 st)
@@ -300,13 +312,16 @@ You can look at the [Planck Keyboard](https://github.com/qmk/qmk_firmware/blob/e
 
 This adds a click sound each time you hit a button, to simulate click sounds from the keyboard. And the sounds are slightly different for each keypress, so it doesn't sound like a single long note, if you type rapidly. 
 
-* `CK_TOGG` - Toggles the status (will play sound if enabled)
-* `CK_ON` - Turns on Audio Click (plays sound)
-* `CK_OFF` - Turns off Audio Click (doesn't play sound)
-* `CK_RST` - Resets the frequency to the default state (plays sound at default frequency)
-* `CK_UP` - Increases the frequency of the clicks (plays sound at new frequency)
-* `CK_DOWN` - Decreases the frequency of the clicks (plays sound at new frequency)
+Keycodes available:
 
+|Key                      |Aliases  |Description                                |
+|-------------------------|---------|-------------------------------------------|
+|`QK_AUDIO_CLICKY_TOGGLE` |`CK_TOGG`|Toggles Audio clicky mode                  |
+|`QK_AUDIO_CLICKY_ON`     |`CK_ON`  |Turns on Audio clicky mode                 |
+|`QK_AUDIO_CLICKY_OFF`    |`CK_OFF` |Turns on Audio clicky mode                 |
+|`QK_AUDIO_CLICKY_UP`     |`CK_UP`  |Increases frequency of the clicks          |
+|`QK_AUDIO_CLICKY_DOWN`   |`CK_DOWN`|Decreases frequency of the clicks          |
+|`QK_AUDIO_CLICKY_RESET`  |`CK_RST` |Resets frequency to default                |
 
 The feature is disabled by default, to save space.  To enable it, add this to your `config.h`:
 
@@ -333,16 +348,20 @@ See [MIDI](feature_midi.md)
 
 ## Audio Keycodes
 
-|Key             |Aliases  |Description                       |
-|----------------|---------|----------------------------------|
-|`AU_ON`         |         |Audio mode on                     |
-|`AU_OFF`        |         |Audio mode off                    |
-|`AU_TOG`        |         |Toggles Audio mode                |
-|`CLICKY_TOGGLE` |`CK_TOGG`|Toggles Audio clicky mode         |
-|`CLICKY_UP`     |`CK_UP`  |Increases frequency of the clicks |
-|`CLICKY_DOWN`   |`CK_DOWN`|Decreases frequency of the clicks |
-|`CLICKY_RESET`  |`CK_RST` |Resets frequency to default       |
-|`MU_ON`         |         |Turns on Music Mode               |
-|`MU_OFF`        |         |Turns off Music Mode              |
-|`MU_TOG`        |         |Toggles Music Mode                |
-|`MU_MOD`        |         |Cycles through the music modes    |
+|Key                      |Aliases  |Description                                |
+|-------------------------|---------|-------------------------------------------|
+|`QK_AUDIO_ON`            |`AU_ON`  |Turns on Audio Feature                     |
+|`QK_AUDIO_OFF`           |`AU_OFF` |Turns off Audio Feature                    |
+|`QK_AUDIO_TOGGLE`        |`AU_TOGG`|Toggles Audio state                        |
+|`QK_AUDIO_CLICKY_TOGGLE` |`CK_TOGG`|Toggles Audio clicky mode                  |
+|`QK_AUDIO_CLICKY_ON`     |`CK_ON`  |Turns on Audio clicky mode                 |
+|`QK_AUDIO_CLICKY_OFF`    |`CK_OFF` |Turns on Audio clicky mode                 |
+|`QK_AUDIO_CLICKY_UP`     |`CK_UP`  |Increases frequency of the clicks          |
+|`QK_AUDIO_CLICKY_DOWN`   |`CK_DOWN`|Decreases frequency of the clicks          |
+|`QK_AUDIO_CLICKY_RESET`  |`CK_RST` |Resets frequency to default                |
+|`QK_MUSIC_ON`            |`MU_ON`  |Turns on Music Mode                        |
+|`QK_MUSIC_OFF`           |`MU_OFF` |Turns off Music Mode                       |
+|`QK_MUSIC_TOGGLE`        |`MU_TOGG`|Toggles Music Mode                         |
+|`QK_MUSIC_MODE_NEXT`     |`MU_NEXT`|Cycles through the music modes             |
+|`QK_AUDIO_VOICE_NEXT`    |`AU_NEXT`|Cycles through the audio voices            |
+|`QK_AUDIO_VOICE_PREVIOUS`|`AU_PREV`|Cycles through the audio voices in reverse |

docs/feature_auto_shift.md

@@ -300,14 +300,14 @@ This will enable you to define three keys temporarily to increase, decrease and
 
 Map three keys temporarily in your keymap:
 
-| Key Name | Description                                         |
-|----------|-----------------------------------------------------|
-| KC_ASDN  | Lower the Auto Shift timeout variable (down)        |
-| KC_ASUP  | Raise the Auto Shift timeout variable (up)          |
-| KC_ASRP  | Report your current Auto Shift timeout value        |
-| KC_ASON  | Turns on the Auto Shift Function                    |
-| KC_ASOFF | Turns off the Auto Shift Function                   |
-| KC_ASTG  | Toggles the state of the Auto Shift feature         |
+|Keycode               |Aliases  |Description                                 |
+|----------------------|---------|--------------------------------------------|
+|`QK_AUTO_SHIFT_DOWN`  |`AS_DOWN`|Lower the Auto Shift timeout variable (down)|
+|`QK_AUTO_SHIFT_UP`    |`AS_UP`  |Raise the Auto Shift timeout variable (up)  |
+|`QK_AUTO_SHIFT_REPORT`|`AS_RPT` |Report your current Auto Shift timeout value|
+|`QK_AUTO_SHIFT_ON`    |`AS_ON`  |Turns on the Auto Shift Function            |
+|`QK_AUTO_SHIFT_OFF`   |`AS_OFF` |Turns off the Auto Shift Function           |
+|`QK_AUTO_SHIFT_TOGGLE`|`AS_TOGG`|Toggles the state of the Auto Shift feature |
 
 Compile and upload your new firmware.
 
@@ -318,18 +318,18 @@ completely normal and with no intention of shifted keys.
 
 1. Type multiple sentences of alphabetical letters.
 2. Observe any upper case letters.
-3. If there are none, press the key you have mapped to `KC_ASDN` to decrease
+3. If there are none, press the key you have mapped to `AS_DOWN` to decrease
    time Auto Shift timeout value and go back to step 1.
 4. If there are some upper case letters, decide if you need to work on tapping
    those keys with less down time, or if you need to increase the timeout.
 5. If you decide to increase the timeout, press the key you have mapped to
-   `KC_ASUP` and go back to step 1.
+   `AS_UP` and go back to step 1.
 6. Once you are happy with your results, press the key you have mapped to
-   `KC_ASRP`. The keyboard will type by itself the value of your
+   `AS_RPT`. The keyboard will type by itself the value of your
    `AUTO_SHIFT_TIMEOUT`.
 7. Update `AUTO_SHIFT_TIMEOUT` in your `config.h` with the value reported.
 8. Add `AUTO_SHIFT_NO_SETUP` to your `config.h`.
-9. Remove the key bindings `KC_ASDN`, `KC_ASUP` and `KC_ASRP`.
+9. Remove the key bindings `AS_DOWN`, `AS_UP` and `AS_RPT`.
 10. Compile and upload your new firmware.
 
 #### An Example Run
@@ -337,17 +337,17 @@ completely normal and with no intention of shifted keys.
     hello world. my name is john doe. i am a computer programmer playing with
     keyboards right now.
 
-    [PRESS KC_ASDN quite a few times]
+    [PRESS AS_DOWN quite a few times]
 
     heLLo woRLd. mY nAMe is JOHn dOE. i AM A compUTeR proGRaMMER PlAYiNG witH
     KEYboArDS RiGHT NOw.
 
-    [PRESS KC_ASUP a few times]
+    [PRESS AS_UP a few times]
 
     hello world. my name is john Doe. i am a computer programmer playing with
     keyboarDs right now.
 
-    [PRESS KC_ASRP]
+    [PRESS AS_RPT]
 
     115
 

docs/feature_autocorrect.md

@@ -0,0 +1,295 @@
+# Autocorrect
+
+There are a lot of words that are prone to being typed incorrectly, due to habit, sequence or just user error.  This feature leverages your firmware to automatically correct these errors, to help reduce typos.
+
+## How does it work? :id=how-does-it-work
+
+The feature maintains a small buffer of recent key presses. On each key press, it checks whether the buffer ends in a recognized typo, and if so, automatically sends keystrokes to correct it.
+
+The tricky part is how to efficiently check the buffer for typos. We don’t want to spend too much memory or time on storing or searching the typos. A good solution is to represent the typos with a trie data structure. A trie is a tree data structure where each node is a letter, and words are formed by following a path to one of the leaves.
+
+![An example trie](https://i.imgur.com/HL5DP8H.png)
+
+Since we search whether the buffer ends in a typo, we store the trie writing in reverse. The trie is queried starting from the last letter, then second to last letter, and so on, until either a letter doesn’t match or we reach a leaf, meaning a typo was found.
+
+## How do I enable Autocorrection :id=how-do-i-enable-autocorrection
+
+In your `rules.mk`, add this:
+
+```make
+AUTOCORRECT_ENABLE = yes
+```
+
+Additionally, you will need a library for autocorrection.  A small sample library is included by default, so that you can get up and running right away, but you can provide a customized library.
+
+By default, autocorrect is disabled.  To enable it, you need to use the `AC_TOGG` keycode to enable it. The status is stored in persistent memory, so you shouldn't need to enabled it again.
+
+## Customizing autocorrect library :id=customizing-autocorrect-library
+
+To provide a custom library, you need to create a text file with the corrections.  For instance:
+
+```text
+:thier        -> their
+fitler        -> filter
+lenght        -> length
+ouput         -> output
+widht         -> width
+```
+
+The syntax is `typo  ->  correction`. Typos and corrections are case insensitive, and any whitespace before or after the typo and correction is ignored. The typo must be only the letters a–z, or the special character : representing a word break. The correction may have any non-unicode characters.
+
+Then, run:
+
+```sh
+qmk generate-autocorrect-data autocorrect_dictionary.txt
+```
+
+This will process the file and produce an `autocorrect_data.h` file with the trie library, in the folder that you are at.  You can specify the keyboard and keymap (eg `-kb planck/rev6 -km jackhumbert`), and it will place the file in that folder instead. But as long as the file is located in your keymap folder, or user folder, it should be picked up automatically.
+
+This file will look like this:
+
+```c
+// :thier        -> their
+// fitler        -> filter
+// lenght        -> length
+// ouput         -> output
+// widht         -> width
+
+#define AUTOCORRECT_MIN_LENGTH 5  // "ouput"
+#define AUTOCORRECT_MAX_LENGTH 6  // ":thier"
+
+#define DICTIONARY_SIZE 74
+
+static const uint8_t autocorrect_data[DICTIONARY_SIZE] PROGMEM = {85, 7, 0, 23, 35, 0, 0, 8, 0, 76, 16, 0, 15, 25, 0, 0,
+    11, 23, 44, 0, 130, 101, 105, 114, 0, 23, 12, 9, 0, 131, 108, 116, 101, 114, 0, 75, 42, 0, 24, 64, 0, 0, 71, 49, 0,
+    10, 56, 0, 0, 12, 26, 0, 129, 116, 104, 0, 17, 8, 15, 0, 129, 116, 104, 0, 19, 24, 18, 0, 130, 116, 112, 117, 116,
+    0};
+```
+
+### Avoiding false triggers :id=avoiding-false-triggers
+
+By default, typos are searched within words, to find typos within longer identifiers like maxFitlerOuput. While this is useful, a consequence is that autocorrection will falsely trigger when a typo happens to be a substring of a correctly-spelled word. For instance, if we had thier -> their as an entry, it would falsely trigger on (correct, though relatively uncommon) words like “wealthier” and “filthier.”
+
+The solution is to set a word break : before and/or after the typo to constrain matching. : matches space, period, comma, underscore, digits, and most other non-alpha characters.
+
+|Text             |thier   |:thier  |thier:  |:thier: |
+|-----------------|:------:|:------:|:------:|:------:|
+|see `thier` typo |matches |matches |matches |matches |
+|it’s `thiers`    |matches |matches |no      |no      |
+|wealthier words  |matches |no      |matches |no      |
+
+:thier: is most restrictive, matching only when thier is a whole word.
+
+The `qmk generate-autocorrect-data` commands can make an effort to check for entries that would false trigger as substrings of correct words. It searches each typo against a dictionary of 25K English words from the english_words Python package, provided it’s installed. (run `python3 -m pip install english_words` to install it.)
+
+?> Unfortunately, this is limited to just english words, at this point.
+
+## Overriding Autocorrect
+
+Occasionally you might actually want to type a typo (for instance, while editing autocorrection_dict.txt) without being autocorrected. There are a couple of ways to do this:
+
+1. Begin typing the typo.
+2. Before typing the last letter, press and release the Ctrl or Alt key.
+3. Type the remaining letters.
+
+This works because the autocorrection implementation doesn’t understand hotkeys, so it resets itself whenever a modifier other than shift is held.
+
+Additionally, you can use the `AC_TOGG` keycode to toggle the on/off status for Autocorrect.
+
+### Keycodes :id=keycodes
+
+|Keycode                |Aliases  |Description                                   |
+|-----------------------|---------|----------------------------------------------|
+|`QK_AUTOCORRECT_ON`    |`AC_ON`  |Turns on the Autocorrect feature.             |
+|`QK_AUTOCORRECT_OFF`   |`AC_OFF` |Turns off the Autocorrect feature.            |
+|`QK_AUTOCORRECT_TOGGLE`|`AC_TOGG`|Toggles the status of the Autocorrect feature.|
+
+## User Callback Functions
+
+### Process Autocorrect
+
+Callback function `bool process_autocorrect_user(uint16_t *keycode, keyrecord_t *record, uint8_t *typo_buffer_size, uint8_t *mods)` is available to customise incoming keycodes and handle exceptions. You can use this function to sanitise input before they are passed onto the autocorrect engine
+
+?> Sanitisation of input is required because autocorrect will only match 8-bit [basic keycodes](keycodes_basic.md) for typos. If valid modifier keys or 16-bit keycodes that are part of a user's word input (such as Shift + A) is passed through, they will fail typo letter detection. For example a [Mod-Tap](mod_tap.md) key such as `LCTL_T(KC_A)` is 16-bit and should be masked for the 8-bit `KC_A`.
+
+The default user callback function is found inside `quantum/process_keycode/process_autocorrect.c`. It covers most use-cases for QMK special functions and quantum keycodes, including [overriding autocorrect](#overriding-autocorrect) with a modifier other than shift. The `process_autocorrect_user` function is `weak` defined to allow user's copy inside `keymap.c` (or code files) to overwrite it.
+
+#### Process Autocorrect Example
+
+If you have a custom keycode `QMKBEST` that should be ignored as part of a word, and another custom keycode `QMKLAYER` that should override autocorrect, both can be added to the bottom of the `process_autocorrect_user` `switch` statement in your source code:
+
+```c
+bool process_autocorrect_user(uint16_t *keycode, keyrecord_t *record, uint8_t *typo_buffer_size, uint8_t *mods) {
+    // See quantum_keycodes.h for reference on these matched ranges.
+    switch (*keycode) {
+        // Exclude these keycodes from processing.
+        case KC_LSFT:
+        case KC_RSFT:
+        case KC_CAPS:
+        case QK_TO ... QK_ONE_SHOT_LAYER_MAX:
+        case QK_LAYER_TAP_TOGGLE ... QK_LAYER_MOD_MAX:
+        case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX:
+            return false;
+
+        // Mask for base keycode from shifted keys.
+        case QK_LSFT ... QK_LSFT + 255:
+        case QK_RSFT ... QK_RSFT + 255:
+            if (*keycode >= QK_LSFT && *keycode <= (QK_LSFT + 255)) {
+                *mods |= MOD_LSFT;
+            } else {
+                *mods |= MOD_RSFT;
+            }
+            *keycode &= 0xFF; // Get the basic keycode.
+            return true;
+#ifndef NO_ACTION_TAPPING
+        // Exclude tap-hold keys when they are held down
+        // and mask for base keycode when they are tapped.
+        case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
+#    ifdef NO_ACTION_LAYER
+            // Exclude Layer Tap, if layers are disabled
+            // but action tapping is still enabled.
+            return false;
+#    endif
+        case QK_MOD_TAP ... QK_MOD_TAP_MAX:
+            // Exclude hold if mods other than Shift is not active
+            if (!record->tap.count) {
+                return false;
+            }
+            *keycode &= 0xFF;
+            break;
+#else
+        case QK_MOD_TAP ... QK_MOD_TAP_MAX:
+        case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
+            // Exclude if disabled
+            return false;
+#endif
+        // Exclude swap hands keys when they are held down
+        // and mask for base keycode when they are tapped.
+        case QK_SWAP_HANDS ... QK_SWAP_HANDS_MAX:
+#ifdef SWAP_HANDS_ENABLE
+            if (*keycode >= 0x56F0 || !record->tap.count) {
+                return false;
+            }
+            *keycode &= 0xFF;
+            break;
+#else
+            // Exclude if disabled
+            return false;
+#endif
+        // Handle custom keycodes
+        case QMKBEST:
+            return false;
+        case QMKLAYER:
+            *typo_buffer_size = 0;
+            return false;
+    }
+
+    // Disable autocorrect while a mod other than shift is active.
+    if ((*mods & ~MOD_MASK_SHIFT) != 0) {
+        *typo_buffer_size = 0;
+        return false;
+    }
+
+    return true;
+}
+```
+
+?> In this callback function, `return false` will skip processing of that keycode for autocorrect. Adding `*typo_buffer_size = 0` will also reset the autocorrect buffer at the same time, cancelling any current letters already stored in the buffer.
+
+### Apply Autocorrect
+
+Additionally, `apply_autocorrect(uint8_t backspaces, const char *str)` allows for users to add additional handling to the autocorrection, or replace the functionality entirely. This passes on the number of backspaces needed to replace the words, as well as the replacement string (partial word, not the full word).
+
+#### Apply Autocorrect Example
+
+This following example will play a sound when a typo is autocorrected and execute the autocorrection itself:
+
+```c
+#ifdef AUDIO_ENABLE
+float autocorrect_song[][2] = SONG(TERMINAL_SOUND);
+#endif
+
+bool apply_autocorrect(uint8_t backspaces, const char *str) {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(autocorrect_song);
+#endif
+    for (uint8_t i = 0; i < backspaces; ++i) {
+        tap_code(KC_BSPC);
+    }
+    send_string_P(str);
+    return false;
+}
+```
+
+?> In this callback function, `return false` will stop the normal processing of autocorrect, which requires manually handling of removing the "bad" characters and typing the new characters.
+
+!> ***IMPORTANT***: `str` is a pointer to `PROGMEM` data for the autocorrection.  If you return false, and want to send the string, this needs to use `send_string_P` and not `send_string` or `SEND_STRING`.
+
+You can also use `apply_autocorrect` to detect and display the event but allow internal code to execute the autocorrection with `return true`:
+
+```c
+bool apply_autocorrect(uint8_t backspaces, const char *str) {
+#ifdef OLED_ENABLE
+    oled_write_P(PSTR("Auto-corrected"), false);
+#endif
+    return true;
+}
+```
+
+## Appendix: Trie binary data format :id=appendix
+
+This section details how the trie is serialized to byte data in autocorrection_data. You don’t need to care about this to use this autocorrection implementation. But it is documented for the record in case anyone is interested in modifying the implementation, or just curious how it works.
+
+What I did here is fairly arbitrary, but it is simple to decode and gets the job done.
+
+### Encoding :id=encoding
+
+All autocorrection data is stored in a single flat array autocorrection_data. Each trie node is associated with a byte offset into this array, where data for that node is encoded, beginning with root at offset 0. There are three kinds of nodes. The highest two bits of the first byte of the node indicate what kind:
+
+* 00 ⇒ chain node: a trie node with a single child.
+* 01 ⇒ branching node: a trie node with multiple children.
+* 10 ⇒ leaf node: a leaf, corresponding to a typo and storing its correction.
+
+![An example trie](https://i.imgur.com/HL5DP8H.png)
+
+**Branching node**. Each branch is encoded with one byte for the keycode (KC_A–KC_Z) followed by a link to the child node. Links between nodes are 16-bit byte offsets relative to the beginning of the array, serialized in little endian order.
+
+All branches are serialized this way, one after another, and terminated with a zero byte. As described above, the node is identified as a branch by setting the two high bits of the first byte to 01, done by bitwise ORing the first keycode with 64. keycode. The root node for the above figure would be serialized like:
+
+```
++-------+-------+-------+-------+-------+-------+-------+
+| R|64  |    node 2     |   T   |    node 3     |   0   |
++-------+-------+-------+-------+-------+-------+-------+
+```
+
+**Chain node**. Tries tend to have long chains of single-child nodes, as seen in the example above with f-i-t-l in fitler. So to save space, we use a different format to encode chains than branching nodes. A chain is encoded as a string of keycodes, beginning with the node closest to the root, and terminated with a zero byte. The child of the last node in the chain is encoded immediately after. That child could be either a branching node or a leaf.
+
+In the figure above, the f-i-t-l chain is encoded as
+
+```
++-------+-------+-------+-------+-------+
+|   L   |   T   |   I   |   F   |   0   |
++-------+-------+-------+-------+-------+
+```
+
+If we were to encode this chain using the same format used for branching nodes, we would encode a 16-bit node link with every node, costing 8 more bytes in this example. Across the whole trie, this adds up. Conveniently, we can point to intermediate points in the chain and interpret the bytes in the same way as before. E.g. starting at the i instead of the l, and the subchain has the same format.
+
+**Leaf node**. A leaf node corresponds to a particular typo and stores data to correct the typo. The leaf begins with a byte for the number of backspaces to type, and is followed by a null-terminated ASCII string of the replacement text. The idea is, after tapping backspace the indicated number of times, we can simply pass this string to the `send_string_P` function. For fitler, we need to tap backspace 3 times (not 4, because we catch the typo as the final ‘r’ is pressed) and replace it with lter. To identify the node as a leaf, the two high bits are set to 10 by ORing the backspace count with 128:
+
+```
++-------+-------+-------+-------+-------+-------+
+| 3|128 |  'l'  |  't'  |  'e'  |  'r'  |   0   |
++-------+-------+-------+-------+-------+-------+
+```
+
+### Decoding :id=decoding
+
+This format is by design decodable with fairly simple logic. A 16-bit variable state represents our current position in the trie, initialized with 0 to start at the root node. Then, for each keycode, test the highest two bits in the byte at state to identify the kind of node.
+
+* 00 ⇒ **chain node**: If the node’s byte matches the keycode, increment state by one to go to the next byte. If the next byte is zero, increment again to go to the following node.
+* 01 ⇒ **branching node**: Search the branches for one that matches the keycode, and follow its node link.
+* 10 ⇒ **leaf node**: a typo has been found! We read its first byte for the number of backspaces to type, then pass its following bytes to send_string_P to type the correction.
+
+## Credits
+
+Credit goes to [getreuer](https://github.com/getreuer) for originally implementing this [here](https://getreuer.info/posts/keyboards/autocorrection/#how-does-it-work).  As well as to [filterpaper](https://github.com/filterpaper) for converting the code to use PROGMEM, and additional improvements.

docs/feature_backlight.md

@@ -16,15 +16,15 @@ BACKLIGHT_ENABLE = yes
 
 Once enabled, the following keycodes below can be used to change the backlight level.
 
-|Key      |Description                        |
-|---------|-----------------------------------|
-|`BL_TOGG`|Turn the backlight on or off       |
-|`BL_STEP`|Cycle through backlight levels     |
-|`BL_ON`  |Set the backlight to max brightness|
-|`BL_OFF` |Turn the backlight off             |
-|`BL_INC` |Increase the backlight level       |
-|`BL_DEC` |Decrease the backlight level       |
-|`BL_BRTG`|Toggle backlight breathing         |
+| Key                             | Aliases   | Description                         |
+|---------------------------------|-----------|-------------------------------------|
+| `QK_BACKLIGHT_TOGGLE`           | `BL_TOGG` | Turn the backlight on or off        |
+| `QK_BACKLIGHT_STEP`             | `BL_STEP` | Cycle through backlight levels      |
+| `QK_BACKLIGHT_ON`               | `BL_ON`   | Set the backlight to max brightness |
+| `QK_BACKLIGHT_OFF`              | `BL_OFF`  | Turn the backlight off              |
+| `QK_BACKLIGHT_UP`               | `BL_UP`   | Increase the backlight level        |
+| `QK_BACKLIGHT_DOWN`             | `BL_DOWN` | Decrease the backlight level        |
+| `QK_BACKLIGHT_TOGGLE_BREATHING` | `BL_BRTG` | Toggle backlight breathing          |
 
 ## Functions :id=functions
 

docs/feature_bluetooth.md

@@ -39,8 +39,8 @@ BLUETOOTH_DRIVER = BluefruitLE # or RN42
 
 This is used when multiple keyboard outputs can be selected. Currently this only allows for switching between USB and Bluetooth on keyboards that support both.
 
-|Name      |Description                                   |
-|----------|----------------------------------------------|
-|`OUT_AUTO`|Automatically switch between USB and Bluetooth|
-|`OUT_USB` |USB only                                      |
-|`OUT_BT`  |Bluetooth only                                |
+|Key                  |Aliases  |Description                                   |
+|---------------------|---------|----------------------------------------------|
+|`QK_OUTPUT_AUTO`     |`OU_AUTO`|Automatically switch between USB and Bluetooth|
+|`QK_OUTPUT_USB`      |`OU_USB` |USB only                                      |
+|`QK_OUTPUT_BLUETOOTH`|`OU_BT`  |Bluetooth only                                |

docs/feature_caps_word.md

@@ -4,7 +4,10 @@ It is often useful to type a single word in all capitals, for instance
 abbreviations like "QMK", or in code, identifiers like `KC_SPC`. "Caps Word" is
 a modern alternative to Caps Lock:
 
-* Letters are capitalized while active, and Caps Word automatically disables
+* While active, letters are capitalized and `-` becomes `_`. The `_` makes it easier
+  to type constant names (eg 'PROGRAM\_CONSTANTS').
+
+* Caps Word automatically disables
   itself at the end of the word. That is, it stops by default once a space or
   any key other than `KC_A`--`KC_Z`, `KC_0`--`KC_9`, `KC_MINS`, `KC_UNDS`,
   `KC_DELETE`, or `KC_BACKSPACE` is pressed. Caps Word also disables itself if
@@ -39,8 +42,8 @@ CAPS_WORD_ENABLE = yes
 
 Next, use one the following methods to activate Caps Word:
 
-* **Activate by pressing a key**: Use the `CAPS_WORD` keycode (short
-  alias `CAPSWRD`) in your keymap.
+* **Activate by pressing a key**: Use the `QK_CAPS_WORD_TOGGLE` keycode (short
+  alias `CW_TOGG`) in your keymap.
 
 * **Activate by pressing Left Shift + Right Shift**: Add `#define
   BOTH_SHIFTS_TURNS_ON_CAPS_WORD` to config.h. You may also need to disable or

docs/feature_combo.md

@@ -105,11 +105,11 @@ It is worth noting that `COMBO_ACTION`s are not needed anymore. As of [PR#8591](
 ## Keycodes
 You can enable, disable and toggle the Combo feature on the fly. This is useful if you need to disable them temporarily, such as for a game. The following keycodes are available for use in your `keymap.c`
 
-|Keycode   |Description                      |
-|----------|---------------------------------|
-|`CMB_ON`  |Turns on Combo feature           |
-|`CMB_OFF` |Turns off Combo feature          |
-|`CMB_TOG` |Toggles Combo feature on and off |
+|Keycode          |Aliases  |Description                     |
+|-----------------|---------|--------------------------------|
+|`QK_COMBO_ON`    |`CM_ON`  |Turns on Combo feature          |
+|`QK_COMBO_OFF`   |`CM_OFF` |Turns off Combo feature         |
+|`QK_COMBO_TOGGLE`|`CM_TOGG`|Toggles Combo feature on and off|
 
 # Advanced Configuration
 These configuration settings can be set in your `config.h` file.
@@ -255,7 +255,7 @@ bool combo_should_trigger(uint16_t combo_index, combo_t *combo, uint16_t keycode
 ```
 
 ## Variable Length Combos
-If you leave `COMBO_COUNT` undefined in `config.h`, it allows you to programmatically declare the size of the Combo data structure and avoid updating `COMBO_COUNT`. Instead a variable called `COMBO_LEN` has to be set. It can be set with something similar to the following in `keymap.c`: `uint16_t COMBO_LEN = sizeof(key_combos) / sizeof(key_combos[0]);` or by adding `COMBO_LENGTH` as the *last* entry in the combo enum and then `uint16_t COMBO_LEN = COMBO_LENGTH;` as such:
+If you leave `COMBO_COUNT` undefined in `config.h`, it allows you to programmatically declare the size of the Combo data structure and avoid updating `COMBO_COUNT`. Instead a variable called `COMBO_LEN` has to be set. It can be set with something similar to the following in `keymap.c`: `uint16_t COMBO_LEN = ARRAY_SIZE(key_combos);` or by adding `COMBO_LENGTH` as the *last* entry in the combo enum and then `uint16_t COMBO_LEN = COMBO_LENGTH;` as such:
 ```c
 enum myCombos {
     ...,

docs/feature_converters.md

@@ -17,6 +17,9 @@ Currently the following converters are available:
 | `promicro` | `bit_c_pro`       |
 | `promicro` | `stemcell`        |
 | `promicro` | `bonsai_c4`       |
+| `promicro` | `elite_pi`        |
+| `elite_c`  | `stemcell`        |
+| `elite_c`  | `elite_pi`        |
 
 See below for more in depth information on each converter.
 
@@ -47,6 +50,23 @@ Once a converter is enabled, it exposes the `CONVERT_TO_<target_uppercase>` flag
 #endif
 ```
 
+### Pin Compatibility
+
+To ensure compatibility, provide validation, and power future workflows, a keyboard should declare its `pin compatibility`. For legacy reasons, this is currently assumed to be `promicro`.
+
+Currently the following pin compatibility interfaces are defined:
+
+| Pinout     | Notes                             |
+|------------|-----------------------------------|
+| `promicro` | Includes RX/TX LEDs               |
+| `elite_c`  | Includes bottom row pins, no LEDs |
+
+To declare the base for conversions, add this line to your keyboard's `rules.mk`:
+
+```makefile
+PIN_COMPATIBLE = elite_c
+```
+
 ## Pro Micro
 
 If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.com/products/12640) (or compatible board), the supported alternative controllers are:
@@ -60,6 +80,7 @@ If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.co
 | [Bit-C PRO](https://nullbits.co/bit-c-pro)                                               | `bit_c_pro`       |
 | [STeMCell](https://github.com/megamind4089/STeMCell)                                     | `stemcell`        |
 | [customMK Bonsai C4](https://shop.custommk.com/products/bonsai-c4-microcontroller-board) | `bonsai_c4`       |
+| [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040)         | `elite_pi`        |
 
 Converter summary:
 
@@ -72,6 +93,7 @@ Converter summary:
 | `bit_c_pro`       | `-e CONVERT_TO=bit_c_pro`       | `CONVERT_TO=bit_c_pro`       | `#ifdef CONVERT_TO_BIT_C_PRO`       |
 | `stemcell`        | `-e CONVERT_TO=stemcell`        | `CONVERT_TO=stemcell`        | `#ifdef CONVERT_TO_STEMCELL`        |
 | `bonsai_c4`       | `-e CONVERT_TO=bonsai_c4`       | `CONVERT_TO=bonsai_c4`       | `#ifdef CONVERT_TO_BONSAI_C4`       |
+| `elite_pi`        | `-e CONVERT_TO=elite_pi`        | `CONVERT_TO=elite_pi`        | `#ifdef CONVERT_TO_ELITE_PI`        |
 
 ### Proton C :id=proton_c
 
@@ -102,9 +124,9 @@ The following defaults are based on what has been implemented for [RP2040](platf
 | USB Host (e.g. USB-USB converter)            | Not supported (USB host code is AVR specific and is not currently supported on ARM)                              |
 | [Split keyboards](feature_split_keyboard.md) | Partial via `PIO` vendor driver - heavily dependent on enabled features                                          |
 
-### SparkFun Pro Micro - RP2040, Blok, and Bit-C PRO :id=promicro_rp2040 
+### SparkFun Pro Micro - RP2040, Blok, Bit-C PRO, and Elite-Pi :id=promicro_rp2040 
 
-Currently identical to  [Adafruit KB2040](#kb2040).
+Currently identical to [Adafruit KB2040](#kb2040).
 
 ### STeMCell :id=stemcell
 
@@ -135,4 +157,26 @@ The Bonsai C4 only has one on-board LED (B2), and by default, both the Pro Micro
 #define B0 PAL_LINE(GPIOA, 9)
 ```
 
-No peripherals are enabled by default at this time, but example code to enable SPI, I2C, PWM, and Serial communications can be found [here](/keyboards/custommk/bonsai_c4_template) 
+## Elite-C
+
+If a board currently supported in QMK uses an [Elite-C](https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4), the supported alternative controllers are:
+
+| Device                                                                           | Target            |
+|----------------------------------------------------------------------------------|-------------------|
+| [STeMCell](https://github.com/megamind4089/STeMCell)                             | `stemcell`        |
+| [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040) | `elite_pi`        |
+
+Converter summary:
+
+| Target            | Argument                        | `rules.mk`                   | Condition                           |
+|-------------------|---------------------------------|------------------------------|-------------------------------------|
+| `stemcell`        | `-e CONVERT_TO=stemcell`        | `CONVERT_TO=stemcell`        | `#ifdef CONVERT_TO_STEMCELL`        |
+| `elite_pi`        | `-e CONVERT_TO=elite_pi`        | `CONVERT_TO=elite_pi`        | `#ifdef CONVERT_TO_ELITE_PI`        |
+
+### STeMCell :id=stemcell_elite
+
+Currently identical to [STeMCell](#stemcell) with support for the additional bottom row of pins.
+
+### Elite-Pi :id=elite_pi
+
+Currently identical to [Adafruit KB2040](#kb2040), with support for the additional bottom row of pins.

docs/feature_digitizer.md

@@ -1,35 +1,117 @@
-## Digitizer
+# Digitizer :id=digitizer
 
-The digitizer HID interface allows setting the mouse cursor position at absolute coordinates, unlike the Pointing Device feature that applies relative displacements.
+Digitizers allow the mouse cursor to be placed at absolute coordinates, unlike the [Pointing Device](feature_pointing_device.md) feature which applies relative displacements.
 
-To enable the digitizer interface, add the following line to your rules.mk: 
+This feature implements a stylus device with a tip switch and barrel switch (generally equivalent to the primary and secondary mouse buttons respectively). Tip pressure is not currently implemented.
+
+## Usage :id=usage
+
+Add the following to your `rules.mk`:
 
 ```make
 DIGITIZER_ENABLE = yes
 ```
 
-In order to change the mouse cursor position from your keymap.c file, include the digitizer header : 
+## Positioning :id=positioning
+
+The X and Y coordinates are normalized, meaning their value must be set between 0 and 1. For the X component, the value `0` is the leftmost position, whereas the value `1` is the rightmost position. Similarly for the Y component, `0` is at the top and `1` at the bottom.
+
+?> Since there is no display attached, the OS will likely map these coordinates to the virtual desktop. This may be important to know if you have multiple monitors.
+
+## Examples :id=examples
+
+This example simply places the cursor in the middle of the screen:
 
 ```c
-#include "digitizer.h"
+digitizer_in_range_on();
+digitizer_set_position(0.5, 0.5);
 ```
 
-This gives you access to the `digitizer` structure which members allow you to change the cursor position.
+The "in range" indicator is required to be on for the change in coordinates to be taken. It can then be turned off again to signal the end of the digitizer interaction, but it is not strictly required.
 
-The coordinates are normalized, meaning there value must be set between 0 and 1. For the `x` coordinate, the value `0` is the leftmost position, whereas the value `1` is the rightmost position.
-For the `y` coordinate, `0` is at the top and `1` at the bottom.
-
-Here is an example setting the cursor in the middle of the screen:
+You can also modify the digitizer state directly, if you need to change multiple fields in a single report:
 
 ```c
-digitizer_t digitizer;
-digitizer.x = 0.5;
-digitizer.y = 0.5;
-digitizer.tipswitch = 0;
-digitizer.inrange = 1;
-digitizer_set_report(digitizer);
+digitizer_state.in_range = true;
+digitizer_state.dirty = true;
+digitizer_flush();
 ```
 
-The `tipswitch` member triggers what equates to a click when set to `1`. The `inrange` member is required for the change in coordinates to be taken. It can then be set to `0` in a new report to signal the end of the digitizer interaction, but it is not strictly required.
+`digitizer_state` is a struct of type `digitizer_t`.
 
-Once all members are set to the desired value, the `status` member needs its bitmask `DZ_UPDATED` to be set so the report is sent during the next main loop iteration.
+
+## API :id=api
+
+### `struct digitizer_t` :id=api-digitizer-t
+
+Contains the state of the digitizer.
+
+#### Members :id=api-digitizer-t-members
+
+ - `bool in_range`  
+   Indicates to the host that the contact is within range (ie. close to or in contact with the digitizer surface).
+ - `bool tip`  
+   The state of the tip switch.
+ - `bool barrel`  
+   The state of the barrel switch.
+ - `float x`  
+   The X coordinate of the digitizer contact.
+ - `float y`  
+   The Y coordinate of the digitizer contact.
+ - `bool dirty`  
+   Whether the current state needs to be sent to the host.
+
+---
+
+### `void digitizer_flush(void)` :id=api-digitizer-flush
+
+Send the digitizer report to the host if it is marked as dirty.
+
+---
+
+### `void digitizer_in_range_on(void)` :api-digitizer-in-range-on
+
+Assert the "in range" indicator, and flush the report.
+
+---
+
+### `void digitizer_in_range_off(void)` :api-digitizer-in-range-off
+
+Deassert the "in range" indicator, and flush the report.
+
+---
+
+### `void digitizer_tip_switch_on(void)` :api-digitizer-tip-switch-on
+
+Assert the tip switch, and flush the report.
+
+---
+
+### `void digitizer_tip_switch_off(void)` :api-digitizer-tip-switch-off
+
+Deassert the tip switch, and flush the report.
+
+---
+
+### `void digitizer_barrel_switch_on(void)` :api-digitizer-barrel-switch-on
+
+Assert the barrel switch, and flush the report.
+
+---
+
+### `void digitizer_barrel_switch_off(void)` :api-digitizer-barrel-switch-off
+
+Deassert the barrel switch, and flush the report.
+
+---
+
+### `void digitizer_set_position(float x, float y)` :api-digitizer-set-position
+
+Set the absolute X and Y position of the digitizer contact, and flush the report.
+
+#### Arguments :id=api-digitizer-set-position-arguments
+
+ - `float x`  
+   The X value of the contact position, from 0 to 1.
+ - `float y`  
+   The Y value of the contact position, from 0 to 1.

docs/feature_dynamic_macros.md

@@ -6,21 +6,21 @@ You can store one or two macros and they may have a combined total of 128 keypre
 
 To enable them, first include `DYNAMIC_MACRO_ENABLE = yes` in your `rules.mk`. Then, add the following keys to your keymap:
 
-|Key               |Alias     |Description                                        |
-|------------------|----------|---------------------------------------------------|
-|`DYN_REC_START1`  |`DM_REC1` |Start recording Macro 1                            |
-|`DYN_REC_START2`  |`DM_REC2` |Start recording Macro 2                            |
-|`DYN_MACRO_PLAY1` |`DM_PLY1` |Replay Macro 1                                     |
-|`DYN_MACRO_PLAY2` |`DM_PLY2` |Replay Macro 2                                     |
-|`DYN_REC_STOP`    |`DM_RSTP` |Finish the macro that is currently being recorded. |
+|Key                              |Alias    |Description                                       |
+|---------------------------------|---------|--------------------------------------------------|
+|`QK_DYNAMIC_MACRO_RECORD_START_1`|`DM_REC1`|Start recording Macro 1                           |
+|`QK_DYNAMIC_MACRO_RECORD_START_2`|`DM_REC2`|Start recording Macro 2                           |
+|`QK_DYNAMIC_MACRO_PLAY_1`        |`DM_PLY1`|Replay Macro 1                                    |
+|`QK_DYNAMIC_MACRO_PLAY_2`        |`DM_PLY2`|Replay Macro 2                                    |
+|`QK_DYNAMIC_MACRO_RECORD_STOP`   |`DM_RSTP`|Finish the macro that is currently being recorded.|
 
 That should be everything necessary. 
 
-To start recording the macro, press either `DYN_REC_START1` or `DYN_REC_START2`. 
+To start recording the macro, press either `DM_REC1` or `DM_REC2`. 
 
-To finish the recording, press the `DYN_REC_STOP` layer button. You can also press `DYN_REC_START1` or `DYN_REC_START2` again to stop the recording.
+To finish the recording, press the `DM_RSTP` layer button. You can also press `DM_REC1` or `DM_REC2` again to stop the recording.
 
-To replay the macro, press either `DYN_MACRO_PLAY1` or `DYN_MACRO_PLAY2`.
+To replay the macro, press either `DM_PLY1` or `DM_PLY2`.
 
 It is possible to replay a macro as part of a macro. It's ok to replay macro 2 while recording macro 1 and vice versa but never create recursive macros i.e. macro 1 that replays macro 1. If you do so and the keyboard will get unresponsive, unplug the keyboard and plug it again.  You can disable this completely by defining `DYNAMIC_MACRO_NO_NESTING`  in your `config.h` file.
 
@@ -43,10 +43,10 @@ If the LEDs start blinking during the recording with each keypress, it means the
 
 ### DYNAMIC_MACRO_USER_CALL
 
-For users of the earlier versions of dynamic macros: It is still possible to finish the macro recording using just the layer modifier used to access the dynamic macro keys, without a dedicated `DYN_REC_STOP` key. If you want this behavior back, add `#define DYNAMIC_MACRO_USER_CALL` to your `config.h` and insert the following snippet at the beginning of your `process_record_user()` function:
+For users of the earlier versions of dynamic macros: It is still possible to finish the macro recording using just the layer modifier used to access the dynamic macro keys, without a dedicated `DM_RSTP` key. If you want this behavior back, add `#define DYNAMIC_MACRO_USER_CALL` to your `config.h` and insert the following snippet at the beginning of your `process_record_user()` function:
 
 ```c
-	uint16_t macro_kc = (keycode == MO(_DYN) ? DYN_REC_STOP : keycode);
+	uint16_t macro_kc = (keycode == MO(_DYN) ? DM_RSTP : keycode);
 
 	if (!process_record_dynamic_macro(macro_kc, record)) {
 		return false;

docs/feature_eeprom.md

@@ -0,0 +1,134 @@
+# Persistent Configuration (EEPROM)
+
+This allows you to configure persistent settings for your keyboard.  These settings are stored in the EEPROM of your controller, and are retained even after power loss. The settings can be read with `eeconfig_read_kb` and `eeconfig_read_user`, and can be written to using `eeconfig_update_kb` and `eeconfig_update_user`. This is useful for features that you want to be able to toggle (like toggling rgb layer indication).  Additionally, you can use `eeconfig_init_kb` and `eeconfig_init_user` to set the default values for the EEPROM.
+
+The complicated part here, is that there are a bunch of ways that you can store and access data via EEPROM, and there is no "correct" way to do this.  However, you only have a DWORD (4 bytes) for each function.
+
+Keep in mind that EEPROM has a limited number of writes. While this is very high, it's not the only thing writing to the EEPROM, and if you write too often, you can potentially drastically shorten the life of your MCU.
+
+* If you don't understand the example, then you may want to avoid using this feature, as it is rather complicated.
+
+## Example Implementation
+
+This is an example of how to add settings, and read and write it. We're using the user keymap for the example here.  This is a complex function, and has a lot going on.  In fact, it uses a lot of the above functions to work!
+
+
+In your keymap.c file, add this to the top:
+```c
+typedef union {
+  uint32_t raw;
+  struct {
+    bool     rgb_layer_change :1;
+  };
+} user_config_t;
+
+user_config_t user_config;
+```
+
+This sets up a 32 bit structure that we can store settings with in memory, and write to the EEPROM. Using this removes the need to define variables, since they're defined in this structure. Remember that `bool` (boolean) values use 1 bit, `uint8_t` uses 8 bits, `uint16_t` uses up 16 bits.  You can mix and match, but changing the order can cause issues, as it will change the values that are read and written.
+
+We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `keyboard_post_init_user` and `process_record_user` to configure everything.
+
+Now, using the `keyboard_post_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap.  And It should look like:
+```c
+void keyboard_post_init_user(void) {
+  // Call the keymap level matrix init.
+
+  // Read the user config from EEPROM
+  user_config.raw = eeconfig_read_user();
+
+  // Set default layer, if enabled
+  if (user_config.rgb_layer_change) {
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_noeeprom(HSV_CYAN);
+    rgblight_mode_noeeprom(1);
+  }
+}
+```
+The above function will use the EEPROM config immediately after reading it, to set the default layer's RGB color. The "raw" value of it is converted in a usable structure based on the "union" that you created above.
+
+```c
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
+    case _RAISE:
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_MAGENTA); rgblight_mode_noeeprom(1); }
+        break;
+    case _LOWER:
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_RED); rgblight_mode_noeeprom(1); }
+        break;
+    case _PLOVER:
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_GREEN); rgblight_mode_noeeprom(1); }
+        break;
+    case _ADJUST:
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_WHITE); rgblight_mode_noeeprom(1); }
+        break;
+    default: //  for any other layers, or the default layer
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_CYAN); rgblight_mode_noeeprom(1); }
+        break;
+    }
+  return state;
+}
+```
+This will cause the RGB underglow to be changed ONLY if the value was enabled.  Now to configure this value, create a new keycode for `process_record_user` called `RGB_LYR`. Additionally, we want to make sure that if you use the normal RGB codes, that it turns off  Using the example above, make it look this:
+```c
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case FOO:
+      if (record->event.pressed) {
+        // Do something when pressed
+      } else {
+        // Do something else when release
+      }
+      return false; // Skip all further processing of this key
+    case KC_ENTER:
+        // Play a tone when enter is pressed
+        if (record->event.pressed) {
+            PLAY_SONG(tone_qwerty);
+        }
+        return true; // Let QMK send the enter press/release events
+    case RGB_LYR:  // This allows me to use underglow as layer indication, or as normal
+        if (record->event.pressed) {
+            user_config.rgb_layer_change ^= 1; // Toggles the status
+            eeconfig_update_user(user_config.raw); // Writes the new status to EEPROM
+            if (user_config.rgb_layer_change) { // if layer state indication is enabled,
+                layer_state_set(layer_state);   // then immediately update the layer color
+            }
+        }
+        return false;
+    case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // For any of the RGB codes (see quantum_keycodes.h, L400 for reference)
+        if (record->event.pressed) { //This disables layer indication, as it's assumed that if you're changing this ... you want that disabled
+            if (user_config.rgb_layer_change) {        // only if this is enabled
+                user_config.rgb_layer_change = false;  // disable it, and
+                eeconfig_update_user(user_config.raw); // write the setings to EEPROM
+            }
+        }
+        return true; break;
+    default:
+      return true; // Process all other keycodes normally
+  }
+}
+```
+And lastly, you want to add the `eeconfig_init_user` function, so that when the EEPROM is reset, you can specify default values, and even custom actions. To force an EEPROM reset, use the `EE_CLR` keycode or [Bootmagic Lite](feature_bootmagic.md) functionallity. For example, if you want to set rgb layer indication by default, and save the default valued.
+
+```c
+void eeconfig_init_user(void) {  // EEPROM is getting reset!
+  user_config.raw = 0;
+  user_config.rgb_layer_change = true; // We want this enabled by default
+  eeconfig_update_user(user_config.raw); // Write default value to EEPROM now
+
+  // use the non noeeprom versions, to write these values to EEPROM too
+  rgblight_enable(); // Enable RGB by default
+  rgblight_sethsv(HSV_CYAN);  // Set it to CYAN by default
+  rgblight_mode(1); // set to solid by default
+}
+```
+
+And you're done.  The RGB layer indication will only work if you want it to. And it will be saved, even after unplugging the board. And if you use any of the RGB codes, it will disable the layer indication, so that it stays on the mode and color that you set it to.
+
+## 'EECONFIG' Function Documentation
+
+* Keyboard/Revision: `void eeconfig_init_kb(void)`, `uint32_t eeconfig_read_kb(void)` and `void eeconfig_update_kb(uint32_t val)`
+* Keymap: `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)` and `void eeconfig_update_user(uint32_t val)`
+
+The `val` is the value of the data that you want to write to EEPROM.  And the `eeconfig_read_*` function return a 32 bit (DWORD) value from the EEPROM.

docs/feature_encoders.md

@@ -90,6 +90,14 @@ const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
 
 ?> This should only be enabled at the keymap level.
 
+Using encoder mapping pumps events through the normal QMK keycode processing pipeline, resulting in a _keydown/keyup_ combination pushed through `process_record_xxxxx()`. To configure the amount of time between the encoder "keyup" and "keydown", you can add the following to your `config.h`:
+
+```c
+#define ENCODER_MAP_KEY_DELAY 10
+```
+
+?> By default, the encoder map delay matches the value of `TAP_CODE_DELAY`.
+
 ## Callbacks
 
 When not using `ENCODER_MAP_ENABLE = yes`, the callback functions can be inserted into your `<keyboard>.c`:
@@ -121,7 +129,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
 }
 ```
 
-!> If you return `true`, it will allow the keyboard level code to run as well. Returning `false` will override the keyboard level code, depending on how the keyboard function is set up. 
+!> If you return `true`, it will allow the keyboard level code to run as well. Returning `false` will override the keyboard level code, depending on how the keyboard function is set up.
 
 Layer conditions can also be used with the callback function like the following:
 
@@ -174,7 +182,7 @@ The A an B lines of the encoders should be wired directly to the MCU, and the C/
 Multiple encoders may share pins so long as each encoder has a distinct pair of pins when the following conditions are met:
 - using detent encoders
 - pads must be high at the detent stability point which is called 'default position' in QMK
-- no more than two encoders sharing a pin can be turned at the same time 
+- no more than two encoders sharing a pin can be turned at the same time
 
 For example you can support two encoders using only 3 pins like this
 ```
@@ -187,4 +195,4 @@ You could even support three encoders using only three pins (one per encoder) ho
 #define ENCODERS_PAD_A { B1, B1, B2 }
 #define ENCODERS_PAD_B { B2, B3, B3 }
 ```
-Here rotating Encoder 0 `B1 B2` and Encoder 1 `B1 B3` could be interpreted as rotating Encoder 2 `B2 B3` or `B3 B2` depending on the timing. This may still be a useful configuration depending on your use case 
+Here rotating Encoder 0 `B1 B2` and Encoder 1 `B1 B3` could be interpreted as rotating Encoder 2 `B2 B3` or `B3 B2` depending on the timing. This may still be a useful configuration depending on your use case

docs/feature_haptic_feedback.md

@@ -32,21 +32,21 @@ The following `config.h` settings are available for all types of haptic feedback
 
 Not all keycodes below will work depending on which haptic mechanism you have chosen.
 
-| Name      | Description                                           |
-|-----------|-------------------------------------------------------|
-|`HPT_ON`   | Turn haptic feedback on                               |
-|`HPT_OFF`  | Turn haptic feedback off                              |
-|`HPT_TOG`  | Toggle haptic feedback on/off                         |
-|`HPT_RST`  | Reset haptic feedback config to default               |
-|`HPT_FBK`  | Toggle feedback to occur on keypress, release or both |
-|`HPT_BUZ`  | Toggle solenoid buzz on/off                           |
-|`HPT_MODI` | Go to next DRV2605L waveform                          |
-|`HPT_MODD` | Go to previous DRV2605L waveform                      |
-|`HPT_CONT` | Toggle continuous haptic mode on/off                  |
-|`HPT_CONI` | Increase DRV2605L continous haptic strength           |
-|`HPT_COND` | Decrease DRV2605L continous haptic strength           |
-|`HPT_DWLI` | Increase Solenoid dwell time                          |
-|`HPT_DWLD` | Decrease Solenoid dwell time                          |
+| Key                         | Aliases | Description                                           |
+|-----------------------------|---------|-------------------------------------------------------|
+|`QK_HAPTIC_ON`               |`HF_ON`  | Turn haptic feedback on                               |
+|`QK_HAPTIC_OFF`              |`HF_OFF` | Turn haptic feedback off                              |
+|`QK_HAPTIC_TOGGLE`           |`HF_TOGG`| Toggle haptic feedback on/off                         |
+|`QK_HAPTIC_RESET`            |`HF_RST` | Reset haptic feedback config to default               |
+|`QK_HAPTIC_FEEDBACK_TOGGLE`  |`HF_FDBK`| Toggle feedback to occur on keypress, release or both |
+|`QK_HAPTIC_BUZZ_TOGGLE`      |`HF_BUZZ`| Toggle solenoid buzz on/off                           |
+|`QK_HAPTIC_MODE_NEXT`        |`HF_NEXT`| Go to next DRV2605L waveform                          |
+|`QK_HAPTIC_MODE_PREVIOUS`    |`HF_PREV`| Go to previous DRV2605L waveform                      |
+|`QK_HAPTIC_CONTINUOUS_TOGGLE`|`HF_CONT`| Toggle continuous haptic mode on/off                  |
+|`QK_HAPTIC_CONTINUOUS_UP`    |`HF_CONU`| Increase DRV2605L continous haptic strength           |
+|`QK_HAPTIC_CONTINUOUS_DOWN`  |`HF_COND`| Decrease DRV2605L continous haptic strength           |
+|`QK_HAPTIC_DWELL_UP`         |`HF_DWLU`| Increase Solenoid dwell time                          |
+|`QK_HAPTIC_DWELL_DOWN`       |`HF_DWLD`| Decrease Solenoid dwell time                          |
 
 ### Solenoids
 
@@ -68,8 +68,8 @@ For relay switches, the hardware may already contain all of that ciruitry, and j
 |`SOLENOID_DEFAULT_DWELL`    | `12` ms              |Configures the default dwell time for the switch.             |
 |`SOLENOID_MIN_DWELL`        | `4` ms               |Sets the lower limit for the dwell.                           |
 |`SOLENOID_MAX_DWELL`        | `100` ms             |Sets the upper limit for the dwell.                           |
-|`SOLENOID_DWELL_STEP_SIZE`  | `1` ms               |The step size to use when `HPT_DWL*` keycodes are sent.       |
-|`SOLENOID_DEFAULT_BUZZ`     | `0` (disabled)       |On HPT_RST buzz is set "on" if this is "1"                    |
+|`SOLENOID_DWELL_STEP_SIZE`  | `1` ms               |The step size to use when `HF_DWL*` keycodes are sent.        |
+|`SOLENOID_DEFAULT_BUZZ`     | `0` (disabled)       |On `HF_RST` buzz is set "on" if this is "1"                   |
 |`SOLENOID_BUZZ_ACTUATED`    | `SOLENOID_MIN_DWELL` |Actuated-time when the switch is in buzz mode.                |
 |`SOLENOID_BUZZ_NONACTUATED` | `SOLENOID_MIN_DWELL` |Non-Actuated-time when the switch is in buzz mode.            |
 
@@ -178,7 +178,7 @@ If haptic feedback is enabled, the keyboard will vibrate to a specific sequence
 ```
 #define DRV_MODE_DEFAULT *sequence name or number*
 ```
-This will set what sequence HPT_RST will set as the active mode. If not defined, mode will be set to 1 when HPT_RST is pressed.
+This will set what sequence `HF_RST` will set as the active mode. If not defined, mode will be set to 1 when `HF_RST` is pressed.
 
 ### DRV2605L Continuous Haptic Mode
 

docs/feature_joystick.md

@@ -1,154 +1,228 @@
-## Joystick
+# Joystick :id=joystick
 
-The keyboard can be made to be recognized as a joystick HID device by the operating system.
+This feature provides game controller input as a joystick device supporting up to 6 axes and 32 buttons. Axes can be read either from an [ADC-capable input pin](adc_driver.md), or can be virtual, so that its value is provided by your code.
 
-!> Joystick support is not currently available on V-USB devices.
+An analog device such as a [potentiometer](https://en.wikipedia.org/wiki/Potentiometer) found on an analog joystick's axes is based on a voltage divider, where adjusting the movable wiper controls the output voltage which can then be read by the microcontroller's ADC.
 
-The joystick feature provides two services:
- * reading analog input devices (eg. potentiometers)
- * sending gamepad HID reports
+## Usage :id=usage
 
-Both services can be used without the other, depending on whether you just want to read a device but not send gamepad reports (for volume control for instance)
-or send gamepad reports based on values computed by the keyboard.
-
-### Analog Input
-
-To use analog input you must first enable it in `rules.mk`:
+Add the following to your `rules.mk`:
 
 ```make
 JOYSTICK_ENABLE = yes
-JOYSTICK_DRIVER = analog # or 'digital'
 ```
 
-An analog device such as a potentiometer found on a gamepad's analog axes is based on a [voltage divider](https://en.wikipedia.org/wiki/Voltage_divider).
-It is composed of three connectors linked to the ground, the power input and power output (usually the middle one). The power output holds the voltage that varies based on the position of the cursor,
-which value will be read using your MCU's [ADC](https://en.wikipedia.org/wiki/Analog-to-digital_converter).
-Depending on which pins are already used by your keyboard's matrix, the rest of the circuit can get a little bit more complicated,
-feeding the power input and ground connection through pins and using diodes to avoid bad interactions with the matrix scanning procedures.
+By default the joystick driver is `analog`, but you can change this with:
 
-### Configuring the Joystick
+```make
+JOYSTICK_DRIVER = digital
+```
 
-By default, two axes and eight buttons are defined. This can be changed in your `config.h`:
+## Configuration :id=configuration
+
+By default, two axes and eight buttons are defined, with a reported resolution of 8 bits (-127 to +127). This can be changed in your `config.h`:
 
 ```c
-// Max 32
+// Min 0, max 32
 #define JOYSTICK_BUTTON_COUNT 16
-// Max 6: X, Y, Z, Rx, Ry, Rz
-#define JOYSTICK_AXES_COUNT 3
+// Min 0, max 6: X, Y, Z, Rx, Ry, Rz
+#define JOYSTICK_AXIS_COUNT 3
+// Min 8, max 16
+#define JOYSTICK_AXIS_RESOLUTION 10
 ```
 
-When defining axes for your joystick, you have to provide a definition array. You can do this from your keymap.c file.
-A joystick will either be read from an input pin that allows the use of the ADC, or can be virtual, so that its value is provided by your code.
-You have to define an array of type ''joystick_config_t'' and of proper size.
+?> You must define at least one button or axis. Also note that the maximum ADC resolution of the supported AVR MCUs is 10-bit, and 12-bit for most STM32 MCUs.
 
-There are three ways for your circuit to work with the ADC, that relies on the use of 1, 2 or 3 pins of the MCU:
- * 1 pin: your analog device is directly connected to your device GND and VCC. The only pin used is the ADC pin of your choice.
- * 2 pins: your analog device is powered through a pin that allows toggling it on or off. The other pin is used to read the input value through the ADC.
- * 3 pins: both the power input and ground are connected to pins that must be set to a proper state before reading and restored afterwards.
+### Axes :id=axes
 
-The configuration of each axis is performed using one of four macros:
- * `JOYSTICK_AXIS_VIRTUAL`: no ADC reading must be performed, that value will be provided by keyboard/keymap-level code
- * `JOYSTICK_AXIS_IN(INPUT_PIN, LOW, REST, HIGH)`: a voltage will be read on the provided pin, which must be an ADC-capable pin.
- * `JOYSTICK_AXIS_IN_OUT(INPUT_PIN, OUTPUT_PIN, LOW, REST, HIGH)`: the provided `OUTPUT_PIN` will be set high before `INPUT_PIN` is read.
- * `JOYSTICK_AXIS_IN_OUT_GROUND(INPUT_PIN, OUTPUT_PIN, GROUND_PIN, LOW, REST, HIGH)`: the `OUTPUT_PIN` will be set high and `GROUND_PIN` will be set low before reading from `INPUT_PIN`.
+When defining axes for your joystick, you must provide a definition array typically in your `keymap.c`.
 
-In any case where an ADC reading takes place (when `INPUT_PIN` is provided), additional `LOW`, `REST` and `HIGH` parameters are used.
-These implement the calibration of the analog device by defining the range of read values that will be mapped to the lowest, resting position and highest possible value for the axis (-127 to 127).
-In practice, you have to provide the lowest/highest raw ADC reading, and the raw reading at resting position, when no deflection is applied. You can provide inverted `LOW` and `HIGH` to invert the axis.
-
-For instance, an axes configuration can be defined in the following way:
+For instance, the below example configures two axes. The X axis is read from the `A4` pin. With the default axis resolution of 8 bits, the range of values between 900 and 575 are scaled to -127 through 0, and values 575 to 285 are scaled to 0 through 127. The Y axis is configured as a virtual axis, and its value is not read from any pin. Instead, the user must update the axis value programmatically.
 
 ```c
-//joystick config
 joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = {
-    [0] = JOYSTICK_AXIS_IN_OUT_GROUND(A4, B0, A7, 900, 575, 285),
-    [1] = JOYSTICK_AXIS_VIRTUAL
+    JOYSTICK_AXIS_IN(A4, 900, 575, 285),
+    JOYSTICK_AXIS_VIRTUAL
 };
 ```
 
-When the ADC reads 900 or higher, the returned axis value will be -127, whereas it will be 127 when the ADC reads 285 or lower. Zero is returned when 575 is read.
+Axes can be configured using one of the following macros:
 
-In this example, the first axis will be read from the `A4` pin while `B0` is set high and `A7` is set low, using `analogReadPin()`, whereas the second axis will not be read.
+ * `JOYSTICK_AXIS_IN(input_pin, low, rest, high)`  
+   The ADC samples the provided pin. `low`, `high` and `rest` correspond to the minimum, maximum, and resting (or centered) analog values of the axis, respectively.
+ * `JOYSTICK_AXIS_IN_OUT(input_pin, output_pin, low, rest, high)`  
+   Same as `JOYSTICK_AXIS_IN()`, but the provided `output_pin` will be pulled high before `input_pin` is read.
+ * `JOYSTICK_AXIS_IN_OUT_GROUND(input_pin, output_pin, ground_pin, low, rest, high)`  
+   Same as `JOYSTICK_AXIS_IN_OUT()`, but the provided `ground_pin` will be pulled low before reading from `input_pin`.
+ * `JOYSTICK_AXIS_VIRTUAL`  
+   No ADC reading is performed. The value should be provided by user code.
 
-In order to give a value to the second axis, you can do so in any customizable entry point: as an action, in `process_record_user()` or in `matrix_scan_user()`, or even in `joystick_task()` which is called even when no key has been pressed.
-You assign a value by writing to `joystick_status.axes[axis_index]` a signed 8-bit value (ranging from -127 to 127). Then it is necessary to assign the flag `JS_UPDATED` to `joystick_status.status` in order for an updated HID report to be sent.
+The `low` and `high` values can be swapped to effectively invert the axis.
 
-The following example writes two axes based on keypad presses, with `KC_P5` as a precision modifier:
+#### Virtual Axes :id=virtual-axes
+
+The following example adjusts two virtual axes (X and Y) based on keypad presses, with `KC_P0` as a precision modifier:
 
 ```c
-#ifdef ANALOG_JOYSTICK_ENABLE
-static uint8_t precision_val = 70;
-static uint8_t axesFlags = 0;
-enum axes {
-    Precision = 1,
-    Axis1High = 2,
-    Axis1Low = 4,
-    Axis2High = 8,
-    Axis2Low = 16
+joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = {
+    JOYSTICK_AXIS_VIRTUAL, // x
+    JOYSTICK_AXIS_VIRTUAL  // y
 };
-#endif
+
+static bool precision = false;
+static uint16_t precision_mod = 64;
+static uint16_t axis_val = 127;
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    switch(keycode) {
-#ifdef ANALOG_JOYSTICK_ENABLE
-        // virtual joystick
-#    if JOYSTICK_AXES_COUNT > 1
+    int16_t precision_val = axis_val;
+    if (precision) {
+        precision_val -= precision_mod;
+    }
+
+    switch (keycode) {
         case KC_P8:
-            if (record->event.pressed) {
-                axesFlags |= Axis2Low;
-            } else {
-                axesFlags &= ~Axis2Low;
-            }
-            joystick_status.status |= JS_UPDATED;
-            break;
+            joystick_set_axis(1, record->event.pressed ? -precision_val : 0);
+            return false;
         case KC_P2:
-            if (record->event.pressed) {
-                axesFlags |= Axis2High;
-            } else {
-                axesFlags &= ~Axis2High;
-            }
-            joystick_status.status |= JS_UPDATED;
-            break;
-#    endif
+            joystick_set_axis(1, record->event.pressed ? precision_val : 0);
+            return false;
         case KC_P4:
-            if (record->event.pressed) {
-                axesFlags |= Axis1Low;
-            } else {
-                axesFlags &= ~Axis1Low;
-            }
-            joystick_status.status |= JS_UPDATED;
-            break;
+            joystick_set_axis(0, record->event.pressed ? -precision_val : 0);
+            return false;
         case KC_P6:
-            if (record->event.pressed) {
-                axesFlags |= Axis1High;
-            } else {
-                axesFlags &= ~Axis1High;
-            }
-            joystick_status.status |= JS_UPDATED;
-            break;
-        case KC_P5:
-            if (record->event.pressed) {
-                axesFlags |= Precision;
-            } else {
-                axesFlags &= ~Precision;
-            }
-            joystick_status.status |= JS_UPDATED;
-            break;
-#endif
+            joystick_set_axis(0, record->event.pressed ? precision_val : 0);
+            return false;
+        case KC_P0:
+            precision = record->event.pressed;
+            return false;
     }
     return true;
 }
 ```
 
-### Axis Resolution
+## Keycodes :id=keycodes
 
-By default, the resolution of each axis is 8 bit, giving a range of -127 to +127. If you need higher precision, you can increase it by defining eg. `JOYSTICK_AXES_RESOLUTION 12` in your `config.h`. The resolution must be between 8 and 16.
+|Key                    |Aliases|Description|
+|-----------------------|-------|-----------|
+|`QK_JOYSTICK_BUTTON_0` |`JS_0` |Button 0   |
+|`QK_JOYSTICK_BUTTON_1` |`JS_1` |Button 1   |
+|`QK_JOYSTICK_BUTTON_2` |`JS_2` |Button 2   |
+|`QK_JOYSTICK_BUTTON_3` |`JS_3` |Button 3   |
+|`QK_JOYSTICK_BUTTON_4` |`JS_4` |Button 4   |
+|`QK_JOYSTICK_BUTTON_5` |`JS_5` |Button 5   |
+|`QK_JOYSTICK_BUTTON_6` |`JS_6` |Button 6   |
+|`QK_JOYSTICK_BUTTON_7` |`JS_7` |Button 7   |
+|`QK_JOYSTICK_BUTTON_8` |`JS_8` |Button 8   |
+|`QK_JOYSTICK_BUTTON_9` |`JS_9` |Button 9   |
+|`QK_JOYSTICK_BUTTON_10`|`JS_10`|Button 10  |
+|`QK_JOYSTICK_BUTTON_11`|`JS_11`|Button 11  |
+|`QK_JOYSTICK_BUTTON_12`|`JS_12`|Button 12  |
+|`QK_JOYSTICK_BUTTON_13`|`JS_13`|Button 13  |
+|`QK_JOYSTICK_BUTTON_14`|`JS_14`|Button 14  |
+|`QK_JOYSTICK_BUTTON_15`|`JS_15`|Button 15  |
+|`QK_JOYSTICK_BUTTON_16`|`JS_16`|Button 16  |
+|`QK_JOYSTICK_BUTTON_17`|`JS_17`|Button 17  |
+|`QK_JOYSTICK_BUTTON_18`|`JS_18`|Button 18  |
+|`QK_JOYSTICK_BUTTON_19`|`JS_19`|Button 19  |
+|`QK_JOYSTICK_BUTTON_20`|`JS_20`|Button 20  |
+|`QK_JOYSTICK_BUTTON_21`|`JS_21`|Button 21  |
+|`QK_JOYSTICK_BUTTON_22`|`JS_22`|Button 22  |
+|`QK_JOYSTICK_BUTTON_23`|`JS_23`|Button 23  |
+|`QK_JOYSTICK_BUTTON_24`|`JS_24`|Button 24  |
+|`QK_JOYSTICK_BUTTON_25`|`JS_25`|Button 25  |
+|`QK_JOYSTICK_BUTTON_26`|`JS_26`|Button 26  |
+|`QK_JOYSTICK_BUTTON_27`|`JS_27`|Button 27  |
+|`QK_JOYSTICK_BUTTON_28`|`JS_28`|Button 28  |
+|`QK_JOYSTICK_BUTTON_29`|`JS_29`|Button 29  |
+|`QK_JOYSTICK_BUTTON_30`|`JS_30`|Button 30  |
+|`QK_JOYSTICK_BUTTON_31`|`JS_31`|Button 31  |
 
-Note that the supported AVR MCUs have a 10-bit ADC, and 12-bit for most STM32 MCUs.
+## API :id=api
 
-### Triggering Joystick Buttons
+### `struct joystick_t` :id=api-joystick-t
 
-Joystick buttons are normal Quantum keycodes, defined as `JS_BUTTON0` to `JS_BUTTON31`, depending on the number of buttons you have configured.
-To trigger a joystick button, just add the corresponding keycode to your keymap.
+Contains the state of the joystick.
 
-You can also trigger joystick buttons in code with `register_joystick_button(button)` and `unregister_joystick_button(button)`, where `button` is the 0-based button index (0 = button 1).
+#### Members :id=api-joystick-t-members
+
+ - `uint8_t buttons[]`  
+   A bit-packed array containing the joystick button states. The size is calculated as `(JOYSTICK_BUTTON_COUNT - 1) / 8 + 1`.
+ - `int16_t axes[]`  
+   An array of analog values for each defined axis.
+ - `bool dirty`  
+   Whether the current state needs to be sent to the host.
+
+---
+
+### `struct joystick_config_t` :id=api-joystick-config-t
+
+Describes a single axis.
+
+#### Members :id=api-joystick-config-t-members
+
+ - `pin_t output_pin`  
+   A pin to set as output high when reading the analog value, or `JS_VIRTUAL_AXIS`.
+ - `pin_t input_pin`  
+   The pin to read the analog value from, or `JS_VIRTUAL_AXIS`.
+ - `pin_t ground_pin`  
+   A pin to set as output low when reading the analog value, or `JS_VIRTUAL_AXIS`.
+ - `uint16_t min_digit`  
+   The minimum analog value.
+ - `uint16_t mid_digit`  
+   The resting or midpoint analog value.
+ - `uint16_t max_digit`  
+   The maximum analog value.
+
+---
+
+### `void joystick_flush(void)` :id=api-joystick-flush
+
+Send the joystick report to the host, if it has been marked as dirty.
+
+---
+
+### `void register_joystick_button(uint8_t button)` :id=api-register-joystick-button
+
+Set the state of a button, and flush the report.
+
+#### Arguments :id=api-register-joystick-button-arguments
+
+ - `uint8_t button`  
+   The index of the button to press, from 0 to 31.
+
+---
+
+### `void register_joystick_button(uint8_t button)` :id=api-unregister-joystick-button
+
+Reset the state of a button, and flush the report.
+
+#### Arguments :id=api-unregister-joystick-button-arguments
+
+ - `uint8_t button`  
+   The index of the button to release, from 0 to 31.
+
+---
+
+### `int16_t joystick_read_axis(uint8_t axis)` :id=api-joystick-read-axis
+
+Sample and process the analog value of the given axis.
+
+#### Arguments :id=api-joystick-read-axis-arguments
+
+ - `uint8_t axis`  
+   The axis to read.
+
+#### Return Value :id=api-joystick-read-axis-return
+
+A signed 16-bit integer, where 0 is the resting or mid point.
+
+### `void joystick_set_axis(uint8_t axis, int16_t value)` :id=api-joystick-set-axis
+
+Set the value of the given axis.
+
+#### Arguments :id=api-joystick-set-axis-arguments
+
+ - `uint8_t axis`  
+   The axis to set the value of.
+ - `int16_t value`  
+   The value to set.

docs/feature_key_lock.md

@@ -2,21 +2,21 @@
 
 Sometimes you may find yourself needing to hold down a specific key for a long period of time. Key Lock holds down the next key you press for you. Press it again, and it will be released.
 
-Let's say you need to type in ALL CAPS for a few sentences. Hit `KC_LOCK`, and then Shift. Now, Shift will be considered held until you tap it again. You can think of Key Lock as Caps Lock, but supercharged.
+Let's say you need to type in ALL CAPS for a few sentences. Hit `QK_LOCK`, and then Shift. Now, Shift will be considered held until you tap it again. You can think of Key Lock as Caps Lock, but supercharged.
 
 ## Usage
 
-First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Then pick a key in your keymap and assign it the keycode `KC_LOCK`.
+First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Then pick a key in your keymap and assign it the keycode `QK_LOCK`.
 
 ## Keycodes
 
 |Keycode  |Description                                                   |
 |---------|--------------------------------------------------------------|
-|`KC_LOCK`|Hold down the next key pressed, until the key is pressed again|
+|`QK_LOCK`|Hold down the next key pressed, until the key is pressed again|
 
 ## Caveats
 
-Key Lock is only able to hold standard action keys and [One Shot modifier](one_shot_keys.md) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
+Key Lock is only able to hold standard action keys and [One Shot modifier](one_shot_keys.md) keys (for example, if you have your Shift defined as `OSM(MOD_LSFT)`).
 This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held.
 
 Switching layers will not cancel the Key Lock. The Key Lock can be cancelled by calling the `cancel_key_lock()` function.

docs/feature_key_overrides.md

@@ -150,15 +150,13 @@ const key_override_t fn_override = {.trigger_mods          = MOD_BIT(KC_RGUI) |
                                    .enabled                = NULL};
 ```
 
-## Keycodes 
+## Keycodes
 
-You can enable, disable and toggle all key overrides on the fly.
-
-|Keycode   |Description                      |Function Equivalent|
-|----------|---------------------------------|--------|
-|`KEY_OVERRIDE_ON`  |Turns on Key Override feature           | `key_override_on(void)`|
-|`KEY_OVERRIDE_OFF` |Turns off Key Override feature          |`key_override_off(void)`|
-|`KEY_OVERRIDE_TOGGLE` |Toggles Key Override feature on and off |`key_override_toggle(void)`|
+|Keycode                 |Aliases  |Description           |
+|------------------------|---------|----------------------|
+|`QK_KEY_OVERRIDE_TOGGLE`|`KO_TOGG`|Toggle key overrides  |
+|`QK_KEY_OVERRIDE_ON`    |`KO_ON`  |Turn on key overrides |
+|`QK_KEY_OVERRIDE_OFF`   |`KO_OFF` |Turn off key overrides|
 
 ## Reference for `key_override_t`
 

docs/feature_layers.md

@@ -1,6 +1,6 @@
 # Layers :id=layers
 
-One of the most powerful and well used features of QMK Firmware is the ability to use layers.  For most people, this amounts to a function key that allows for different keys, much like what you would see on a laptop or tablet keyboard. 
+One of the most powerful and well used features of QMK Firmware is the ability to use layers.  For most people, this amounts to a function key that allows for different keys, much like what you would see on a laptop or tablet keyboard.
 
 For a detailed explanation of how the layer stack works, checkout [Keymap Overview](keymap.md#keymap-and-layers).
 
@@ -9,7 +9,7 @@ For a detailed explanation of how the layer stack works, checkout [Keymap Overvi
 These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
-* `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
+* `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated.
 * `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers: `MOD_LCTL`, `MOD_LSFT`, `MOD_LALT`, `MOD_LGUI` (note the use of `MOD_` constants instead of `KC_`). These modifiers can be combined using bitwise OR, e.g. `LM(_RAISE, MOD_LCTL | MOD_LALT)`.
 * `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
 * `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys](one_shot_keys.md) for details and additional functionality.
@@ -31,7 +31,7 @@ Care must be taken when switching layers, it's possible to lock yourself into a
 
 If you are just getting started with QMK you will want to keep everything simple. Follow these guidelines when setting up your layers:
 
-* Setup layer 0 as your default, "base" layer. This is your normal typing layer, and could be whatever layout you want (qwerty, dvorak, colemak, etc.). It's important to set this as the lowest layer since it will typically have most or all of the keyboard's keys defined, so would block other layers from having any effect if it were above them (i.e., had a higher layer number). 
+* Setup layer 0 as your default, "base" layer. This is your normal typing layer, and could be whatever layout you want (qwerty, dvorak, colemak, etc.). It's important to set this as the lowest layer since it will typically have most or all of the keyboard's keys defined, so would block other layers from having any effect if it were above them (i.e., had a higher layer number).
 * Arrange your layers in a "tree" layout, with layer 0 as the root. Do not try to enter the same layer from more than one other layer.
 * In a layer's keymap, only reference higher-numbered layers. Because layers are processed from the highest-numbered (topmost) active layer down, modifying the state of lower layers can be tricky and error-prone.
 
@@ -89,3 +89,46 @@ It is also possible to check the state of a particular layer using the following
 |---------------------------------|-------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------|
 | `layer_state_is(layer)`         | Checks if the specified `layer` is enabled globally.                                            | `IS_LAYER_ON(layer)`, `IS_LAYER_OFF(layer)`                           |
 | `layer_state_cmp(state, layer)` | Checks `state` to see if the specified `layer` is enabled. Intended for use in layer callbacks. | `IS_LAYER_ON_STATE(state, layer)`, `IS_LAYER_OFF_STATE(state, layer)` |
+
+## Layer Change Code :id=layer-change-code
+
+This runs code every time that the layers get changed.  This can be useful for layer indication, or custom layer handling.
+
+### Example `layer_state_set_*` Implementation
+
+This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example.
+
+```c
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
+    case _RAISE:
+        rgblight_setrgb (0x00,  0x00, 0xFF);
+        break;
+    case _LOWER:
+        rgblight_setrgb (0xFF,  0x00, 0x00);
+        break;
+    case _PLOVER:
+        rgblight_setrgb (0x00,  0xFF, 0x00);
+        break;
+    case _ADJUST:
+        rgblight_setrgb (0x7A,  0x00, 0xFF);
+        break;
+    default: //  for any other layers, or the default layer
+        rgblight_setrgb (0x00,  0xFF, 0xFF);
+        break;
+    }
+  return state;
+}
+```
+
+Use the `IS_LAYER_ON_STATE(state, layer)` and `IS_LAYER_OFF_STATE(state, layer)` macros to check the status of a particular layer.
+
+Outside of `layer_state_set_*` functions, you can use the `IS_LAYER_ON(layer)` and `IS_LAYER_OFF(layer)` macros to check global layer state.
+
+### `layer_state_set_*` Function Documentation
+
+* Keyboard/Revision: `layer_state_t layer_state_set_kb(layer_state_t state)`
+* Keymap: `layer_state_t layer_state_set_user(layer_state_t state)`
+
+
+The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)

docs/feature_leader_key.md

@@ -2,11 +2,11 @@
 
 If you've ever used Vim, you know what a Leader key is. If not, you're about to discover a wonderful concept. :) Instead of hitting Alt+Shift+W for example (holding down three keys at the same time), what if you could hit a _sequence_ of keys instead? So you'd hit our special modifier (the Leader key), followed by W and then C (just a rapid succession of keys), and something would happen.
 
-That's what `KC_LEAD` does. Here's an example:
+That's what `QK_LEAD` does. Here's an example:
 
-1. Pick a key on your keyboard you want to use as the Leader key. Assign it the keycode `KC_LEAD`. This key would be dedicated just for this -- it's a single action key, can't be used for anything else.
-2. Include the line `#define LEADER_TIMEOUT 300` in your `config.h`. This sets the timeout for the `KC_LEAD` key.  Specifically, when you press the `KC_LEAD` key, you only have a certain amount of time to complete the Leader Key sequence.  The `300` here sets that to 300ms, and you can increase this value to give you more time to hit the sequence. But any keys pressed during this timeout are intercepted and not sent, so you may want to keep this value low.  
-   * By default, this timeout is how long after pressing `KC_LEAD` to complete your entire sequence. This may be very low for some people. So you may want to increase this timeout.  Optionally, you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.  This allows you to maintain a low value here, but still be able to use the longer sequences.   To enable this option, add `#define LEADER_PER_KEY_TIMING` to your `config.h`.
+1. Pick a key on your keyboard you want to use as the Leader key. Assign it the keycode `QK_LEAD`. This key would be dedicated just for this -- it's a single action key, can't be used for anything else.
+2. Include the line `#define LEADER_TIMEOUT 300` in your `config.h`. This sets the timeout for the `QK_LEAD` key.  Specifically, when you press the `QK_LEAD` key, you only have a certain amount of time to complete the Leader Key sequence.  The `300` here sets that to 300ms, and you can increase this value to give you more time to hit the sequence. But any keys pressed during this timeout are intercepted and not sent, so you may want to keep this value low.  
+   * By default, this timeout is how long after pressing `QK_LEAD` to complete your entire sequence. This may be very low for some people. So you may want to increase this timeout.  Optionally, you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.  This allows you to maintain a low value here, but still be able to use the longer sequences.   To enable this option, add `#define LEADER_PER_KEY_TIMING` to your `config.h`.
 3. Within your `matrix_scan_user` function, add something like this:
 
 ```c
@@ -95,7 +95,7 @@ While, this may be fine for most, if you want to specify the whole keycode (eg,
 
 The Leader Key feature has some additional customization to how the Leader Key feature works. It has two functions that can be called at certain parts of the process. Namely `leader_start()` and `leader_end()`.
 
-The `leader_start()` function is called when you tap the `KC_LEAD` key, and the `leader_end()` function is called when either the leader sequence is completed, or the leader timeout is hit. 
+The `leader_start()` function is called when you tap the `QK_LEAD` key, and the `leader_end()` function is called when either the leader sequence is completed, or the leader timeout is hit. 
 
 You can add these functions to your code (`keymap.c` usually) to add feedback to the Leader sequences (such as beeping or playing music).
 
@@ -111,7 +111,7 @@ void leader_end(void) {
 
 ### Example
 
-This example will play the Mario "One Up" sound when you hit `KC_LEAD` to start the Leader Sequence, and will play "All Star" if it completes successfully or "Rick Roll" you if it fails. 
+This example will play the Mario "One Up" sound when you hit `QK_LEAD` to start the Leader Sequence, and will play "All Star" if it completes successfully or "Rick Roll" you if it fails. 
 
 ```c
 bool did_leader_succeed;

docs/feature_led_indicators.md

@@ -101,6 +101,13 @@ The `host_keyboard_led_state()` function will report the LED state returned from
 bool caps = host_keyboard_led_state().caps_lock;
 ```
 
+## `led_update_ports()`
+
+This function writes the LED state to the actual hardware. Call it manually
+from your `led_update_*()` callbacks to modify the handling of the standard
+keyboard LEDs.
+For example when repurposing a standard LED indicator as layer indicator.
+
 ## Setting Physical LED State
 
 Some keyboard implementations provide convenient methods for setting the state of the physical LEDs.

docs/feature_led_matrix.md

@@ -22,7 +22,7 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>
 | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
 | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
 | `LED_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
-| `DRIVER_LED_TOTAL` | (Required) How many LED lights are present across all drivers | |
+| `LED_MATRIX_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
 | `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | |
 | `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | |
 | `LED_DRIVER_ADDR_3` | (Optional) Address for the third LED driver | |
@@ -44,17 +44,17 @@ Here is an example using 2 drivers.
 #define LED_DRIVER_COUNT 2
 #define LED_DRIVER_1_LED_TOTAL 25
 #define LED_DRIVER_2_LED_TOTAL 24
-#define DRIVER_LED_TOTAL (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)
+#define LED_MATRIX_LED_COUNT (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)
 ```
 
-!> Note the parentheses, this is so when `LED_DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)` will give very different results than `rand() % LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL`.
+!> Note the parentheses, this is so when `LED_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)` will give very different results than `rand() % LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL`.
 
 For split keyboards using `LED_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31_leds`.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led PROGMEM g_is31_leds[LED_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *    driver
  *    |  LED address
@@ -95,7 +95,7 @@ Configure the hardware via your `config.h`:
 | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
 | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
 | `DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
-| `DRIVER_LED_TOTAL` | (Required) How many LED lights are present across all drivers | |
+| `LED_MATRIX_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Optional) Address for the first LED driver | |
 | `DRIVER_ADDR_<N>` | (Required) Address for the additional LED drivers | |
 | `ISSI_SSR_<N>` | (Optional) Configuration for the Spread Spectrum Register | |
@@ -130,16 +130,16 @@ Here is an example using 2 drivers.
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 66
 #define DRIVER_2_LED_TOTAL 42
-#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#define LED_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 ```
-!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+!> Note the parentheses, this is so when `LED_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
 
 Currently only 4 drivers are supported, but it would be trivial to support for more. Note that using a combination of different drivers is not supported. All drivers must be of the same model.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led __flash g_is31_leds[LED_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *    driver
  *    |  LED address
@@ -199,7 +199,7 @@ x = 224 / (NUMBER_OF_COLS - 1) * COL_POSITION
 y =  64 / (NUMBER_OF_ROWS - 1) * ROW_POSITION
 ```
 
-Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout. 
+Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout.
 
 As mentioned earlier, the center of the keyboard by default is expected to be `{ 112, 32 }`, but this can be changed if you want to more accurately calculate the LED's physical `{ x, y }` positions. Keyboard designers can implement `#define LED_MATRIX_CENTER { 112, 32 }` in their config.h file with the new center point of the keyboard, or where they want it to be allowing more possibilities for the `{ x, y }` values. Do note that the maximum value for x or y is 255, and the recommended maximum is 224 as this gives animations runoff room before they reset.
 
@@ -221,14 +221,14 @@ As mentioned earlier, the center of the keyboard by default is expected to be `{
 
 All LED matrix keycodes are currently shared with the [Backlight feature](feature_backlight.md).
 
-|Key      |Description                  |
-|---------|-----------------------------|
-|`BL_TOGG`|Toggle LED Matrix on or off  |
-|`BL_STEP`|Cycle through modes          |
-|`BL_ON`  |Turn on LED Matrix           |
-|`BL_OFF` |Turn off LED Matrix          |
-|`BL_INC` |Increase the brightness level|
-|`BL_DEC` |Decrease the brightness level|
+| Key                     | Aliases   | Description                   |
+|-------------------------|-----------|-------------------------------|
+| `QK_BACKLIGHT_TOGGLE`   | `BL_TOGG` | Toggle LED Matrix on or off   |
+| `QK_BACKLIGHT_STEP`     | `BL_STEP` | Cycle through modes           |
+| `QK_BACKLIGHT_ON`       | `BL_ON`   | Turn on LED Matrix            |
+| `QK_BACKLIGHT_OFF`      | `BL_OFF`  | Turn off LED Matrix           |
+| `QK_BACKLIGHT_UP`       | `BL_UP`   | Increase the brightness level |
+| `QK_BACKLIGHT_DOWN`     | `BL_DOWN` | Decrease the brightness level |
 
 ## LED Matrix Effects :id=led-matrix-effects
 
@@ -364,15 +364,14 @@ For inspiration and examples, check out the built-in effects under `quantum/led_
 #define LED_MATRIX_KEYPRESSES // reacts to keypresses
 #define LED_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define LED_MATRIX_FRAMEBUFFER_EFFECTS // enable framebuffer effects
-#define LED_DISABLE_TIMEOUT 0 // number of milliseconds to wait until led automatically turns off
-#define LED_DISABLE_AFTER_TIMEOUT 0 // OBSOLETE: number of ticks to wait until disabling effects
+#define LED_MATRIX_TIMEOUT 0 // number of milliseconds to wait until led automatically turns off
 #define LED_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
-#define LED_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+#define LED_MATRIX_LED_PROCESS_LIMIT (LED_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #define LED_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define LED_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs
-#define LED_MATRIX_STARTUP_MODE LED_MATRIX_SOLID // Sets the default mode, if none has been set
-#define LED_MATRIX_STARTUP_VAL LED_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
-#define LED_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set
+#define LED_MATRIX_DEFAULT_MODE LED_MATRIX_SOLID // Sets the default mode, if none has been set
+#define LED_MATRIX_DEFAULT_VAL LED_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
+#define LED_MATRIX_DEFAULT_SPD 127 // Sets the default animation speed, if none has been set
 #define LED_MATRIX_SPLIT { X, Y }   // (Optional) For split keyboards, the number of LEDs connected on each half. X = left, Y = Right.
                                     // If LED_MATRIX_KEYPRESSES or LED_MATRIX_KEYRELEASES is enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR
 ```
@@ -391,7 +390,7 @@ Where `28` is an unused index from `eeconfig.h`.
 |Function                                    |Description  |
 |--------------------------------------------|-------------|
 |`led_matrix_set_value_all(v)`         |Set all of the LEDs to the given value, where `v` is between 0 and 255 (not written to EEPROM) |
-|`led_matrix_set_value(index, v)`      |Set a single LED to the given value, where `v` is between 0 and 255, and `index` is between 0 and `DRIVER_LED_TOTAL` (not written to EEPROM) |
+|`led_matrix_set_value(index, v)`      |Set a single LED to the given value, where `v` is between 0 and 255, and `index` is between 0 and `LED_MATRIX_LED_COUNT` (not written to EEPROM) |
 
 ### Disable/Enable Effects :id=disable-enable-effects
 |Function                                    |Description  |
@@ -440,10 +439,14 @@ Where `28` is an unused index from `eeconfig.h`.
 
 ### Indicators :id=indicators
 
-If you want to set custom indicators, such as an LED for Caps Lock, or layer indication, you can use the `led_matrix_indicators_kb` or `led_matrix_indicators_user` function for that: 
+If you want to set custom indicators, such as an LED for Caps Lock, or layer indication, you can use the `led_matrix_indicators_kb` or `led_matrix_indicators_user` function for that:
 ```c
-void led_matrix_indicators_kb(void) {
+bool led_matrix_indicators_kb(void) {
+    if (!led_matrix_indicators_user()) {
+        return false;
+    }
     led_matrix_set_value(index, value);
+    return true;
 }
 ```
 
@@ -452,5 +455,6 @@ In addition, there are the advanced indicator functions.  These are aimed at tho
 ```c
 void led_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
     LED_MATRIX_INDICATOR_SET_VALUE(index, value);
+    return false;
 }
 ```

docs/feature_macros.md

@@ -33,7 +33,7 @@ You can define up to 32 macros in a `keymap.json` file, as used by [Configurator
     ],
     "layout": "LAYOUT_all",
     "layers": [
-        ["MACRO_0", "MACRO_1", "MACRO_2", "MACRO_3"]
+        ["QK_MACRO_0", "QK_MACRO_1", "QK_MACRO_2", "QK_MACRO_3"]
     ]
 }
 ```
@@ -52,7 +52,7 @@ If you type in a language other than English, or use a non-QWERTY layout like Co
     ],
     "layout": "LAYOUT_all",
     "layers": [
-        ["MACRO_0"]
+        ["QK_MACRO_0"]
     ]
 }
 ```
@@ -199,7 +199,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 #### Advanced Macros
 
-In addition to the `process_record_user()` function, is the `post_process_record_user()` function. This runs after `process_record` and can be used to do things after a keystroke has been sent.  This is useful if you want to have a key pressed before and released after a normal key, for instance. 
+In addition to the `process_record_user()` function, is the `post_process_record_user()` function. This runs after `process_record` and can be used to do things after a keystroke has been sent.  This is useful if you want to have a key pressed before and released after a normal key, for instance.
 
 In this example, we modify most normal keypresses so that `F22` is pressed before the keystroke is normally sent, and release it __only after__ it's been released.
 
@@ -374,7 +374,7 @@ This will clear all keys besides the mods currently pressed.
 This macro will register `KC_LALT` and tap `KC_TAB`, then wait for 1000ms. If the key is tapped again, it will send another `KC_TAB`; if there is no tap, `KC_LALT` will be unregistered, thus allowing you to cycle through windows.
 
 ```c
-bool is_alt_tab_active = false; // ADD this near the begining of keymap.c
+bool is_alt_tab_active = false; // ADD this near the beginning of keymap.c
 uint16_t alt_tab_timer = 0;     // we will be using them soon.
 
 enum custom_keycodes {          // Make sure have the awesome keycode ready

docs/feature_midi.md

@@ -80,164 +80,164 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 ### Keycodes
 
-|Keycode     |Aliases  |Description                      |
-|------------|---------|---------------------------------|
-|`MI_ON`     |         |Turn MIDI on                     |
-|`MI_OFF`    |         |Turn MIDI off                    |
-|`MI_TOG`    |         |Toggle MIDI enabled              |
-|`MI_C`      |         |C octave 0                       |
-|`MI_Cs`     |`MI_Db`  |C♯/D♭ octave 0                   |
-|`MI_D`      |         |D octave 0                       |
-|`MI_Ds`     |`MI_Eb`  |D♯/E♭ octave 0                   |
-|`MI_E`      |         |E octave 0                       |
-|`MI_F`      |         |F octave 0                       |
-|`MI_Fs`     |`MI_Gb`  |F♯/G♭ octave 0                   |
-|`MI_G`      |         |G octave 0                       |
-|`MI_Gs`     |`MI_Gs`  |G♯/A♭ octave 0                   |
-|`MI_A`      |         |A octave 0                       |
-|`MI_As`     |`MI_Bb`  |A♯/B♭ octave 0                   |
-|`MI_B`      |         |B octave 0                       |
-|`MI_C_1`    |         |C octave 1                       |
-|`MI_Cs_1`   |`MI_Db_1`|C♯/D♭ octave 1                   |
-|`MI_D_1`    |         |D octave 1                       |
-|`MI_Ds_1`   |`MI_Eb_1`|D♯/E♭ octave 1                   |
-|`MI_E_1`    |         |E octave 1                       |
-|`MI_F_1`    |         |F octave 1                       |
-|`MI_Fs_1`   |`MI_Gb_1`|F♯/G♭ octave 1                   |
-|`MI_G_1`    |         |G octave 1                       |
-|`MI_Gs_1`   |`MI_Ab_1`|G♯/A♭ octave 1                   |
-|`MI_A_1`    |         |A octave 1                       |
-|`MI_As_1`   |`MI_Bb_1`|A♯/B♭ octave 1                   |
-|`MI_B_1`    |         |B octave 1                       |
-|`MI_C_2`    |         |C octave 2                       |
-|`MI_Cs_2`   |`MI_Db_2`|C♯/D♭ octave 2                   |
-|`MI_D_2`    |         |D octave 2                       |
-|`MI_Ds_2`   |`MI_Eb_2`|D♯/E♭ octave 2                   |
-|`MI_E_2`    |         |E octave 2                       |
-|`MI_F_2`    |         |F octave 2                       |
-|`MI_Fs_2`   |`MI_Gb_2`|F♯/G♭ octave 2                   |
-|`MI_G_2`    |         |G octave 2                       |
-|`MI_Gs_2`   |`MI_Ab_2`|G♯/A♭ octave 2                   |
-|`MI_A_2`    |         |A octave 2                       |
-|`MI_As_2`   |`MI_Bb_2`|A♯/B♭ octave 2                   |
-|`MI_B_2`    |         |B octave 2                       |
-|`MI_C_3`    |         |C octave 3                       |
-|`MI_Cs_3`   |`MI_Db_3`|C♯/D♭ octave 3                   |
-|`MI_D_3`    |         |D octave 3                       |
-|`MI_Ds_3`   |`MI_Eb_3`|D♯/E♭ octave 3                   |
-|`MI_E_3`    |         |E octave 3                       |
-|`MI_F_3`    |         |F octave 3                       |
-|`MI_Fs_3`   |`MI_Gb_3`|F♯/G♭ octave 3                   |
-|`MI_G_3`    |         |G octave 3                       |
-|`MI_Gs_3`   |`MI_Ab_3`|G♯/A♭ octave 3                   |
-|`MI_A_3`    |         |A octave 3                       |
-|`MI_As_3`   |`MI_Bb_3`|A♯/B♭ octave 3                   |
-|`MI_B_3`    |         |B octave 3                       |
-|`MI_C_4`    |         |C octave 4                       |
-|`MI_Cs_4`   |`MI_Db_4`|C♯/D♭ octave 4                   |
-|`MI_D_4`    |         |D octave 4                       |
-|`MI_Ds_4`   |`MI_Eb_4`|D♯/E♭ octave 4                   |
-|`MI_E_4`    |         |E octave 4                       |
-|`MI_F_4`    |         |F octave 4                       |
-|`MI_Fs_4`   |`MI_Gb_4`|F♯/G♭ octave 4                   |
-|`MI_G_4`    |         |G octave 4                       |
-|`MI_Gs_4`   |`MI_Ab_4`|G♯/A♭ octave 4                   |
-|`MI_A_4`    |         |A octave 4                       |
-|`MI_As_4`   |`MI_Bb_4`|A♯/B♭ octave 4                   |
-|`MI_B_4`    |         |B octave 4                       |
-|`MI_C_5`    |         |C octave 5                       |
-|`MI_Cs_5`   |`MI_Db_5`|C♯/D♭ octave 5                   |
-|`MI_D_5`    |         |D octave 5                       |
-|`MI_Ds_5`   |`MI_Eb_5`|D♯/E♭ octave 5                   |
-|`MI_E_5`    |         |E octave 5                       |
-|`MI_F_5`    |         |F octave 5                       |
-|`MI_Fs_5`   |`MI_Gb_5`|F♯/G♭ octave 5                   |
-|`MI_G_5`    |         |G octave 5                       |
-|`MI_Gs_5`   |`MI_Ab_5`|G♯/A♭ octave 5                   |
-|`MI_A_5`    |         |A octave 5                       |
-|`MI_As_5`   |`MI_Bb_5`|A♯/B♭ octave 5                   |
-|`MI_B_5`    |         |B octave 5                       |
-|`MI_OCT_N2` |         |Set octave to -2                 |
-|`MI_OCT_N1` |         |Set octave to -1                 |
-|`MI_OCT_0`  |         |Set octave to 0                  |
-|`MI_OCT_1`  |         |Set octave to 1                  |
-|`MI_OCT_2`  |         |Set octave to 2                  |
-|`MI_OCT_3`  |         |Set octave to 3                  |
-|`MI_OCT_4`  |         |Set octave to 4                  |
-|`MI_OCT_5`  |         |Set octave to 5                  |
-|`MI_OCT_6`  |         |Set octave to 6                  |
-|`MI_OCT_7`  |         |Set octave to 7                  |
-|`MI_OCTD`   |         |Move down an octave              |
-|`MI_OCTU`   |         |Move up an octave                |
-|`MI_TRNS_N6`|         |Set transposition to -6 semitones|
-|`MI_TRNS_N5`|         |Set transposition to -5 semitones|
-|`MI_TRNS_N4`|         |Set transposition to -4 semitones|
-|`MI_TRNS_N3`|         |Set transposition to -3 semitones|
-|`MI_TRNS_N2`|         |Set transposition to -2 semitones|
-|`MI_TRNS_N1`|         |Set transposition to -1 semitone |
-|`MI_TRNS_0` |         |No transposition                 |
-|`MI_TRNS_1` |         |Set transposition to +1 semitone |
-|`MI_TRNS_2` |         |Set transposition to +2 semitones|
-|`MI_TRNS_3` |         |Set transposition to +3 semitones|
-|`MI_TRNS_4` |         |Set transposition to +4 semitones|
-|`MI_TRNS_5` |         |Set transposition to +5 semitones|
-|`MI_TRNS_6` |         |Set transposition to +6 semitones|
-|`MI_TRNSD`  |         |Decrease transposition           |
-|`MI_TRNSU`  |         |Increase transposition           |
-|`MI_VEL_0`  |         |Set velocity to 0                |
-|`MI_VEL_1`  |         |Set velocity to 12               |
-|`MI_VEL_2`  |         |Set velocity to 25               |
-|`MI_VEL_3`  |         |Set velocity to 38               |
-|`MI_VEL_4`  |         |Set velocity to 51               |
-|`MI_VEL_5`  |         |Set velocity to 64               |
-|`MI_VEL_6`  |         |Set velocity to 76               |
-|`MI_VEL_7`  |         |Set velocity to 89               |
-|`MI_VEL_8`  |         |Set velocity to 102              |
-|`MI_VEL_9`  |         |Set velocity to 114              |
-|`MI_VEL_10` |         |Set velocity to 127              |
-|`MI_VELD`   |         |Decrease velocity                |
-|`MI_VELU`   |         |Increase velocity                |
-|`MI_CH1`    |         |Set channel to 1                 |
-|`MI_CH2`    |         |Set channel to 2                 |
-|`MI_CH3`    |         |Set channel to 3                 |
-|`MI_CH4`    |         |Set channel to 4                 |
-|`MI_CH5`    |         |Set channel to 5                 |
-|`MI_CH6`    |         |Set channel to 6                 |
-|`MI_CH7`    |         |Set channel to 7                 |
-|`MI_CH8`    |         |Set channel to 8                 |
-|`MI_CH9`    |         |Set channel to 9                 |
-|`MI_CH10`   |         |Set channel to 10                |
-|`MI_CH11`   |         |Set channel to 11                |
-|`MI_CH12`   |         |Set channel to 12                |
-|`MI_CH13`   |         |Set channel to 13                |
-|`MI_CH14`   |         |Set channel to 14                |
-|`MI_CH15`   |         |Set channel to 15                |
-|`MI_CH16`   |         |Set channel to 16                |
-|`MI_CHD`    |         |Decrease channel                 |
-|`MI_CHU`    |         |Increase channel                 |
-|`MI_ALLOFF` |         |Stop all notes                   |
-|`MI_SUS`    |         |Sustain                          |
-|`MI_PORT`   |         |Portmento                        |
-|`MI_SOST`   |         |Sostenuto                        |
-|`MI_SOFT`   |         |Soft Pedal                       |
-|`MI_LEG`    |         |Legato                           |
-|`MI_MOD`    |         |Modulation                       |
-|`MI_MODSD`  |         |Decrease modulation speed        |
-|`MI_MODSU`  |         |Increase modulation speed        |
-|`MI_BENDD`  |         |Bend pitch down                  |
-|`MI_BENDU`  |         |Bend pitch up                    |
+|Keycode                        |Aliases           |Description                      |
+|-------------------------------|------------------|---------------------------------|
+|`QK_MIDI_ON`                   |`MI_ON`           |Turn MIDI on                     |
+|`QK_MIDI_OFF`                  |`MI_OFF`          |Turn MIDI off                    |
+|`QK_MIDI_TOGGLE`               |`MI_TOGG`         |Toggle MIDI enabled              |
+|`QK_MIDI_NOTE_C_0`             |`MI_C`            |C octave 0                       |
+|`QK_MIDI_NOTE_C_SHARP_0`       |`MI_Cs`, `MI_Db`  |C♯/D♭ octave 0                   |
+|`QK_MIDI_NOTE_D_0`             |`MI_D`            |D octave 0                       |
+|`QK_MIDI_NOTE_D_SHARP_0`       |`MI_Ds`, `MI_Eb`  |D♯/E♭ octave 0                   |
+|`QK_MIDI_NOTE_E_0`             |`MI_E`            |E octave 0                       |
+|`QK_MIDI_NOTE_F_0`             |`MI_F`            |F octave 0                       |
+|`QK_MIDI_NOTE_F_SHARP_0`       |`MI_Fs`, `MI_Gb`  |F♯/G♭ octave 0                   |
+|`QK_MIDI_NOTE_G_0`             |`MI_G`            |G octave 0                       |
+|`QK_MIDI_NOTE_G_SHARP_0`       |`MI_Gs`, `MI_Ab`  |G♯/A♭ octave 0                   |
+|`QK_MIDI_NOTE_A_0`             |`MI_A`            |A octave 0                       |
+|`QK_MIDI_NOTE_A_SHARP_0`       |`MI_As`, `MI_Bb`  |A♯/B♭ octave 0                   |
+|`QK_MIDI_NOTE_B_0`             |`MI_B`            |B octave 0                       |
+|`QK_MIDI_NOTE_C_1`             |`MI_C1`           |C octave 1                       |
+|`QK_MIDI_NOTE_C_SHARP_1`       |`MI_Cs1`, `MI_Db1`|C♯/D♭ octave 1                   |
+|`QK_MIDI_NOTE_D_1`             |`MI_D1`           |D octave 1                       |
+|`QK_MIDI_NOTE_D_SHARP_1`       |`MI_Ds1`, `MI_Eb1`|D♯/E♭ octave 1                   |
+|`QK_MIDI_NOTE_E_1`             |`MI_E1`           |E octave 1                       |
+|`QK_MIDI_NOTE_F_1`             |`MI_F1`           |F octave 1                       |
+|`QK_MIDI_NOTE_F_SHARP_1`       |`MI_Fs1`, `MI_Gb1`|F♯/G♭ octave 1                   |
+|`QK_MIDI_NOTE_G_1`             |`MI_G1`           |G octave 1                       |
+|`QK_MIDI_NOTE_G_SHARP_1`       |`MI_Gs1`, `MI_Ab1`|G♯/A♭ octave 1                   |
+|`QK_MIDI_NOTE_A_1`             |`MI_A1`           |A octave 1                       |
+|`QK_MIDI_NOTE_A_SHARP_1`       |`MI_As1`, `MI_Bb1`|A♯/B♭ octave 1                   |
+|`QK_MIDI_NOTE_B_1`             |`MI_B1`           |B octave 1                       |
+|`QK_MIDI_NOTE_C_2`             |`MI_C2`           |C octave 2                       |
+|`QK_MIDI_NOTE_C_SHARP_2`       |`MI_Cs2`, `MI_Db2`|C♯/D♭ octave 2                   |
+|`QK_MIDI_NOTE_D_2`             |`MI_D2`           |D octave 2                       |
+|`QK_MIDI_NOTE_D_SHARP_2`       |`MI_Ds2`, `MI_Eb2`|D♯/E♭ octave 2                   |
+|`QK_MIDI_NOTE_E_2`             |`MI_E2`           |E octave 2                       |
+|`QK_MIDI_NOTE_F_2`             |`MI_F2`           |F octave 2                       |
+|`QK_MIDI_NOTE_F_SHARP_2`       |`MI_Fs2`, `MI_Gb2`|F♯/G♭ octave 2                   |
+|`QK_MIDI_NOTE_G_2`             |`MI_G2`           |G octave 2                       |
+|`QK_MIDI_NOTE_G_SHARP_2`       |`MI_Gs2`, `MI_Ab2`|G♯/A♭ octave 2                   |
+|`QK_MIDI_NOTE_A_2`             |`MI_A2`           |A octave 2                       |
+|`QK_MIDI_NOTE_A_SHARP_2`       |`MI_As2`, `MI_Bb2`|A♯/B♭ octave 2                   |
+|`QK_MIDI_NOTE_B_2`             |`MI_B2`           |B octave 2                       |
+|`QK_MIDI_NOTE_C_3`             |`MI_C3`           |C octave 3                       |
+|`QK_MIDI_NOTE_C_SHARP_3`       |`MI_Cs3`, `MI_Db3`|C♯/D♭ octave 3                   |
+|`QK_MIDI_NOTE_D_3`             |`MI_D3`           |D octave 3                       |
+|`QK_MIDI_NOTE_D_SHARP_3`       |`MI_Ds3`, `MI_Eb3`|D♯/E♭ octave 3                   |
+|`QK_MIDI_NOTE_E_3`             |`MI_E3`           |E octave 3                       |
+|`QK_MIDI_NOTE_F_3`             |`MI_F3`           |F octave 3                       |
+|`QK_MIDI_NOTE_F_SHARP_3`       |`MI_Fs3`, `MI_Gb3`|F♯/G♭ octave 3                   |
+|`QK_MIDI_NOTE_G_3`             |`MI_G3`           |G octave 3                       |
+|`QK_MIDI_NOTE_G_SHARP_3`       |`MI_Gs3`, `MI_Ab3`|G♯/A♭ octave 3                   |
+|`QK_MIDI_NOTE_A_3`             |`MI_A3`           |A octave 3                       |
+|`QK_MIDI_NOTE_A_SHARP_3`       |`MI_As3`, `MI_Bb3`|A♯/B♭ octave 3                   |
+|`QK_MIDI_NOTE_B_3`             |`MI_B3`           |B octave 3                       |
+|`QK_MIDI_NOTE_C_4`             |`MI_C4`           |C octave 4                       |
+|`QK_MIDI_NOTE_C_SHARP_4`       |`MI_Cs4`, `MI_Db4`|C♯/D♭ octave 4                   |
+|`QK_MIDI_NOTE_D_4`             |`MI_D4`           |D octave 4                       |
+|`QK_MIDI_NOTE_D_SHARP_4`       |`MI_Ds4`, `MI_Eb4`|D♯/E♭ octave 4                   |
+|`QK_MIDI_NOTE_E_4`             |`MI_E4`           |E octave 4                       |
+|`QK_MIDI_NOTE_F_4`             |`MI_F4`           |F octave 4                       |
+|`QK_MIDI_NOTE_F_SHARP_4`       |`MI_Fs4`, `MI_Gb4`|F♯/G♭ octave 4                   |
+|`QK_MIDI_NOTE_G_4`             |`MI_G4`           |G octave 4                       |
+|`QK_MIDI_NOTE_G_SHARP_4`       |`MI_Gs4`, `MI_Ab4`|G♯/A♭ octave 4                   |
+|`QK_MIDI_NOTE_A_4`             |`MI_A4`           |A octave 4                       |
+|`QK_MIDI_NOTE_A_SHARP_4`       |`MI_As4`, `MI_Bb4`|A♯/B♭ octave 4                   |
+|`QK_MIDI_NOTE_B_4`             |`MI_B4`           |B octave 4                       |
+|`QK_MIDI_NOTE_C_5`             |`MI_C5`           |C octave 5                       |
+|`QK_MIDI_NOTE_C_SHARP_5`       |`MI_Cs5`, `MI_Db5`|C♯/D♭ octave 5                   |
+|`QK_MIDI_NOTE_D_5`             |`MI_D5`           |D octave 5                       |
+|`QK_MIDI_NOTE_D_SHARP_5`       |`MI_Ds5`, `MI_Eb5`|D♯/E♭ octave 5                   |
+|`QK_MIDI_NOTE_E_5`             |`MI_E5`           |E octave 5                       |
+|`QK_MIDI_NOTE_F_5`             |`MI_F5`           |F octave 5                       |
+|`QK_MIDI_NOTE_F_SHARP_5`       |`MI_Fs5`, `MI_Gb5`|F♯/G♭ octave 5                   |
+|`QK_MIDI_NOTE_G_5`             |`MI_G5`           |G octave 5                       |
+|`QK_MIDI_NOTE_G_SHARP_5`       |`MI_Gs5`, `MI_Ab5`|G♯/A♭ octave 5                   |
+|`QK_MIDI_NOTE_A_5`             |`MI_A5`           |A octave 5                       |
+|`QK_MIDI_NOTE_A_SHARP_5`       |`MI_As5`, `MI_Bb5`|A♯/B♭ octave 5                   |
+|`QK_MIDI_NOTE_B_5`             |`MI_B5`           |B octave 5                       |
+|`QK_MIDI_OCTAVE_N2`            |`MI_OCN2`         |Set octave to -2                 |
+|`QK_MIDI_OCTAVE_N1`            |`MI_OCN1`         |Set octave to -1                 |
+|`QK_MIDI_OCTAVE_0`             |`MI_OC0`          |Set octave to 0                  |
+|`QK_MIDI_OCTAVE_1`             |`MI_OC1`          |Set octave to 1                  |
+|`QK_MIDI_OCTAVE_2`             |`MI_OC2`          |Set octave to 2                  |
+|`QK_MIDI_OCTAVE_3`             |`MI_OC3`          |Set octave to 3                  |
+|`QK_MIDI_OCTAVE_4`             |`MI_OC4`          |Set octave to 4                  |
+|`QK_MIDI_OCTAVE_5`             |`MI_OC5`          |Set octave to 5                  |
+|`QK_MIDI_OCTAVE_6`             |`MI_OC6`          |Set octave to 6                  |
+|`QK_MIDI_OCTAVE_7`             |`MI_OC7`          |Set octave to 7                  |
+|`QK_MIDI_OCTAVE_DOWN`          |`MI_OCTD`         |Move down an octave              |
+|`QK_MIDI_OCTAVE_UP`            |`MI_OCTU`         |Move up an octave                |
+|`QK_MIDI_TRANSPOSE_N6`         |`MI_TRN6`         |Set transposition to -6 semitones|
+|`QK_MIDI_TRANSPOSE_N5`         |`MI_TRN5`         |Set transposition to -5 semitones|
+|`QK_MIDI_TRANSPOSE_N4`         |`MI_TRN4`         |Set transposition to -4 semitones|
+|`QK_MIDI_TRANSPOSE_N3`         |`MI_TRN3`         |Set transposition to -3 semitones|
+|`QK_MIDI_TRANSPOSE_N2`         |`MI_TRN2`         |Set transposition to -2 semitones|
+|`QK_MIDI_TRANSPOSE_N1`         |`MI_TRN1`         |Set transposition to -1 semitone |
+|`QK_MIDI_TRANSPOSE_0`          |`MI_TR0`          |No transposition                 |
+|`QK_MIDI_TRANSPOSE_1`          |`MI_TR1`          |Set transposition to +1 semitone |
+|`QK_MIDI_TRANSPOSE_2`          |`MI_TR2`          |Set transposition to +2 semitones|
+|`QK_MIDI_TRANSPOSE_3`          |`MI_TR3`          |Set transposition to +3 semitones|
+|`QK_MIDI_TRANSPOSE_4`          |`MI_TR4`          |Set transposition to +4 semitones|
+|`QK_MIDI_TRANSPOSE_5`          |`MI_TR5`          |Set transposition to +5 semitones|
+|`QK_MIDI_TRANSPOSE_6`          |`MI_TR6`          |Set transposition to +6 semitones|
+|`QK_MIDI_TRANSPOSE_DOWN`       |`MI_TRSD`         |Decrease transposition           |
+|`QK_MIDI_TRANSPOSE_UP`         |`MI_TRSU`         |Increase transposition           |
+|`QK_MIDI_VELOCITY_0`           |`MI_VL0`          |Set velocity to 0                |
+|`QK_MIDI_VELOCITY_1`           |`MI_VL1`          |Set velocity to 12               |
+|`QK_MIDI_VELOCITY_2`           |`MI_VL2`          |Set velocity to 25               |
+|`QK_MIDI_VELOCITY_3`           |`MI_VL3`          |Set velocity to 38               |
+|`QK_MIDI_VELOCITY_4`           |`MI_VL4`          |Set velocity to 51               |
+|`QK_MIDI_VELOCITY_5`           |`MI_VL5`          |Set velocity to 64               |
+|`QK_MIDI_VELOCITY_6`           |`MI_VL6`          |Set velocity to 76               |
+|`QK_MIDI_VELOCITY_7`           |`MI_VL7`          |Set velocity to 89               |
+|`QK_MIDI_VELOCITY_8`           |`MI_VL8`          |Set velocity to 102              |
+|`QK_MIDI_VELOCITY_9`           |`MI_VL9`          |Set velocity to 114              |
+|`QK_MIDI_VELOCITY_10`          |`MI_VL10`         |Set velocity to 127              |
+|`QK_MIDI_VELOCITY_DOWN`        |`MI_VELD`         |Decrease velocity                |
+|`QK_MIDI_VELOCITY_UP`          |`MI_VELU`         |Increase velocity                |
+|`QK_MIDI_CHANNEL_1`            |`MI_CH1`          |Set channel to 1                 |
+|`QK_MIDI_CHANNEL_2`            |`MI_CH2`          |Set channel to 2                 |
+|`QK_MIDI_CHANNEL_3`            |`MI_CH3`          |Set channel to 3                 |
+|`QK_MIDI_CHANNEL_4`            |`MI_CH4`          |Set channel to 4                 |
+|`QK_MIDI_CHANNEL_5`            |`MI_CH5`          |Set channel to 5                 |
+|`QK_MIDI_CHANNEL_6`            |`MI_CH6`          |Set channel to 6                 |
+|`QK_MIDI_CHANNEL_7`            |`MI_CH7`          |Set channel to 7                 |
+|`QK_MIDI_CHANNEL_8`            |`MI_CH8`          |Set channel to 8                 |
+|`QK_MIDI_CHANNEL_9`            |`MI_CH9`          |Set channel to 9                 |
+|`QK_MIDI_CHANNEL_10`           |`MI_CH10`         |Set channel to 10                |
+|`QK_MIDI_CHANNEL_11`           |`MI_CH11`         |Set channel to 11                |
+|`QK_MIDI_CHANNEL_12`           |`MI_CH12`         |Set channel to 12                |
+|`QK_MIDI_CHANNEL_13`           |`MI_CH13`         |Set channel to 13                |
+|`QK_MIDI_CHANNEL_14`           |`MI_CH14`         |Set channel to 14                |
+|`QK_MIDI_CHANNEL_15`           |`MI_CH15`         |Set channel to 15                |
+|`QK_MIDI_CHANNEL_16`           |`MI_CH16`         |Set channel to 16                |
+|`QK_MIDI_CHANNEL_DOWN`         |`MI_CHND`         |Decrease channel                 |
+|`QK_MIDI_CHANNEL_UP`           |`MI_CHNU`         |Increase channel                 |
+|`QK_MIDI_ALL_NOTES_OFF`        |`MI_AOFF`         |Stop all notes                   |
+|`QK_MIDI_SUSTAIN`              |`MI_SUST`         |Sustain                          |
+|`QK_MIDI_PORTAMENTO`           |`MI_PORT`         |Portmento                        |
+|`QK_MIDI_SOSTENUTO`            |`MI_SOST`         |Sostenuto                        |
+|`QK_MIDI_SOFT`                 |`MI_SOFT`         |Soft Pedal                       |
+|`QK_MIDI_LEGATO`               |`MI_LEG`          |Legato                           |
+|`QK_MIDI_MODULATION`           |`MI_MOD`          |Modulation                       |
+|`QK_MIDI_MODULATION_SPEED_DOWN`|`MI_MODD`         |Decrease modulation speed        |
+|`QK_MIDI_MODULATION_SPEED_UP`  |`MI_MODU`         |Increase modulation speed        |
+|`QK_MIDI_PITCH_BEND_DOWN`      |`MI_BNDD`         |Bend pitch down                  |
+|`QK_MIDI_PITCH_BEND_UP`        |`MI_BNDU`         |Bend pitch up                    |
 
 ### Configuration
 
 Certain values are stored in the `midi_config` struct. This configuration is not persisted to EEPROM. By default, these values are:
 
-|Configuration      |Value|Comments                 |
-|-------------------|-----|-------------------------|
-|Octave             |`4`  |Corresponds to `MI_OCT_2`|
-|Transposition      |`0`  |                         |
-|Velocity           |`127`|                         |
-|Channel            |`0`  |                         |
-|Modulation Interval|`8`  |                         |
+|Configuration      |Value|Comments               |
+|-------------------|-----|-----------------------|
+|Octave             |`4`  |Corresponds to `MI_OC2`|
+|Transposition      |`0`  |                       |
+|Velocity           |`127`|                       |
+|Channel            |`0`  |                       |
+|Modulation Interval|`8`  |                       |
 
 For the above, the `MI_C` keycode will produce a C3 (note number 48), and so on.
 

docs/feature_mouse_keys.md

@@ -48,8 +48,9 @@ Mouse keys supports three different modes to move the cursor:
 * **Kinetic:** Holding movement keys accelerates the cursor with its speed following a quadratic curve until it reaches its maximum speed.
 * **Constant:** Holding movement keys moves the cursor at constant speeds.
 * **Combined:** Holding movement keys accelerates the cursor until it reaches its maximum speed, but holding acceleration and movement keys simultaneously moves the cursor at constant speeds.
+* **Inertia:** Cursor accelerates when key held, and decelerates after key release.  Tracks X and Y velocity separately for more nuanced movements.  Applies to cursor only, not scrolling.
 
-The same principle applies to scrolling.
+The same principle applies to scrolling, in most modes.
 
 Configuration options that are times, intervals or delays are given in milliseconds. Scroll speed is given as multiples of the default scroll step. For example, a scroll speed of 8 means that each scroll action covers 8 times the length of the default scroll step as defined by your operating system or application.
 
@@ -170,6 +171,37 @@ To use combined speed mode, you must at least define `MK_COMBINED` in your keyma
 #define MK_COMBINED
 ```
 
+### Inertia mode
+
+This mode provides smooth motion, like sliding on ice.  The cursor accelerates
+along a quadratic curve while a key is held, then glides to a stop after the
+key is released.  Vertical and horizontal movements are tracked independently,
+so the cursor can move in many directions and make curves.
+
+Cannot be used at the same time as Kinetic mode, Constant mode, or Combined mode.
+
+Recommended settings in your keymap’s `config.h` file:
+
+|Define                      |Default  |Description                                                |
+|----------------------------|---------|-----------------------------------------------------------|
+|`MOUSEKEY_INERTIA`          |undefined|Enable Inertia mode                                        |
+|`MOUSEKEY_DELAY`            |150      |Delay between pressing a movement key and cursor movement  |
+|`MOUSEKEY_INTERVAL`         |16       |Time between cursor movements in milliseconds (16 = 60fps) |
+|`MOUSEKEY_MAX_SPEED`        |32       |Maximum cursor speed at which acceleration stops           |
+|`MOUSEKEY_TIME_TO_MAX`      |32       |Number of frames until maximum cursor speed is reached     |
+|`MOUSEKEY_FRICTION`         |24       |How quickly the cursor stops after releasing a key         |
+|`MOUSEKEY_MOVE_DELTA`       |1        |How much to move on first frame (1 strongly recommended)   |
+
+Tips:
+
+* Set `MOUSEKEY_DELAY` to roughly the same value as your host computer's key repeat delay, in ms.  Recommended values are 100 to 300.
+* Set `MOUSEKEY_INTERVAL` to a value of 1000 / your monitor's FPS.  For 60 FPS, 1000/60 = 16.
+* Set `MOUSEKEY_MAX_SPEED` based on your screen resolution and refresh rate, like Width / FPS.  For example, 1920 pixels / 60 FPS = 32 pixels per frame.
+* Set `MOUSEKEY_TIME_TO_MAX` to a value of approximately FPS / 2, to make it reach full speed in half a second (or so).
+* Set `MOUSEKEY_FRICTION` to something between 1 and 255.  Lower makes the cursor glide longer. Values from 8 to 40 are the most effective.
+* Keep `MOUSEKEY_MOVE_DELTA` at 1.  This allows precise movements before the gliding effect starts.
+* Mouse wheel options are the same as the default accelerated mode, and do not use inertia.
+
 ## Use with PS/2 Mouse and Pointing Device
 
 Mouse keys button state is shared with [PS/2 mouse](feature_ps2_mouse.md) and [pointing device](feature_pointing_device.md) so mouse keys button presses can be used for clicks and drags.

docs/feature_oled_driver.md

@@ -80,6 +80,11 @@ static void render_logo(void) {
 
     oled_write_P(qmk_logo, false);
 }
+
+bool oled_task_user(void) {
+    render_logo();
+    return false;
+}
 ```
 
 ?> The default font file is located at `drivers/oled/glcdfont.c` and its location can be overwritten with the `OLED_FONT_H` configuration option. Font file content can be edited with external tools such as [Helix Font Editor](https://helixfonteditor.netlify.app/) and [Logo Editor](https://joric.github.io/qle/).
@@ -259,12 +264,12 @@ void oled_render(void);
 void oled_set_cursor(uint8_t col, uint8_t line);
 
 // Advances the cursor to the next page, writing ' ' if true
-// Wraps to the begining when out of bounds
+// Wraps to the beginning when out of bounds
 void oled_advance_page(bool clearPageRemainder);
 
 // Moves the cursor forward 1 character length
 // Advance page if there is not enough room for the next character
-// Wraps to the begining when out of bounds
+// Wraps to the beginning when out of bounds
 void oled_advance_char(void);
 
 // Writes a single character to the buffer at current cursor position

docs/feature_pointing_device.md

@@ -93,20 +93,20 @@ This supports the Cirque Pinnacle 1CA027 Touch Controller, which is used in the
 
 #### Common settings
 
-| Setting                          | Description                                                | Default            |
-| -------------------------------- | ---------------------------------------------------------- | ------------------ |
-| `CIRQUE_PINNACLE_DIAMETER_MM`    | (Optional) Diameter of the trackpad sensor in millimeters. | `40`               |
-| `CIRQUE_PINNACLE_ATTENUATION`    | (Optional) Sets the attenuation of the sensor data.        | `ADC_ATTENUATE_4X` |
-| `CIRQUE_PINNACLE_CURVED_OVERLAY` | (Optional) Applies settings tuned for curved overlay.      | _not defined_      |
-| `CIRQUE_PINNACLE_POSITION_MODE`  | (Optional) Mode of operation.                              | _not defined_      |
+| Setting                          | Description                                                | Default                                     |
+| -------------------------------- | ---------------------------------------------------------- | ------------------------------------------- |
+| `CIRQUE_PINNACLE_DIAMETER_MM`    | (Optional) Diameter of the trackpad sensor in millimeters. | `40`                                        |
+| `CIRQUE_PINNACLE_ATTENUATION`    | (Optional) Sets the attenuation of the sensor data.        | `EXTREG__TRACK_ADCCONFIG__ADC_ATTENUATE_4X` |
+| `CIRQUE_PINNACLE_CURVED_OVERLAY` | (Optional) Applies settings tuned for curved overlay.      | _not defined_                               |
+| `CIRQUE_PINNACLE_POSITION_MODE`  | (Optional) Mode of operation.                              | _not defined_                               |
 
 **`CIRQUE_PINNACLE_ATTENUATION`** is a measure of how much data is suppressed in regards to sensitivity. The higher the attenuation, the less sensitive the touchpad will be.
 
 Default attenuation is set to 4X, although if you are using a thicker overlay (such as the curved overlay) you will want a lower attenuation such as 2X. The possible values are:
-* `ADC_ATTENUATE_4X`: Least sensitive
-* `ADC_ATTENUATE_3X`
-* `ADC_ATTENUATE_2X`
-* `ADC_ATTENUATE_1X`: Most sensitive
+* `EXTREG__TRACK_ADCCONFIG__ADC_ATTENUATE_4X`: Least sensitive
+* `EXTREG__TRACK_ADCCONFIG__ADC_ATTENUATE_3X`
+* `EXTREG__TRACK_ADCCONFIG__ADC_ATTENUATE_2X`
+* `EXTREG__TRACK_ADCCONFIG__ADC_ATTENUATE_1X`: Most sensitive
 
 **`CIRQUE_PINNACLE_POSITION_MODE`** can be `CIRQUE_PINNACLE_ABSOLUTE_MODE` or `CIRQUE_PINNACLE_RELATIVE_MODE`. Modes differ in supported features/gestures.
 
@@ -289,6 +289,7 @@ void           pointing_device_driver_set_cpi(uint16_t cpi) {}
 | `POINTING_DEVICE_INVERT_X`                     | (Optional) Inverts the X axis report.                                                                                            | _not defined_ |
 | `POINTING_DEVICE_INVERT_Y`                     | (Optional) Inverts the Y axis report.                                                                                            | _not defined_ |
 | `POINTING_DEVICE_MOTION_PIN`                   | (Optional) If supported, will only read from sensor if pin is active.                                                            | _not defined_ |
+| `POINTING_DEVICE_MOTION_PIN_ACTIVE_LOW`        | (Optional) If defined then the motion pin is active-low.                                                                         | _varies_      |
 | `POINTING_DEVICE_TASK_THROTTLE_MS`             | (Optional) Limits the frequency that the sensor is polled for motion.                                                            | _not defined_ |
 | `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE` | (Optional) Enable inertial cursor. Cursor continues moving after a flick gesture and slows down by kinetic friction.             | _not defined_ |
 | `POINTING_DEVICE_GESTURES_SCROLL_ENABLE`       | (Optional) Enable scroll gesture. The gesture that activates the scroll is device dependent.                                     | _not defined_ |
@@ -331,10 +332,10 @@ The following configuration options are only available when using `SPLIT_POINTIN
 | `pointing_device_handle_buttons(buttons, pressed, button)` | Callback to handle hardware button presses. Returns a `uint8_t`.                                              |
 | `pointing_device_get_cpi(void)`                            | Gets the current CPI/DPI setting from the sensor, if supported.                                               |
 | `pointing_device_set_cpi(uint16_t)`                        | Sets the CPI/DPI, if supported.                                                                               |
-| `pointing_device_get_report(void)`                         | Returns the current mouse report (as a `mouse_report_t` data structure).                                      |
-| `pointing_device_set_report(mouse_report)`                 | Sets the mouse report to the assigned `mouse_report_t` data structured passed to the function.                |
+| `pointing_device_get_report(void)`                         | Returns the current mouse report (as a `report_mouse_t` data structure).                                      |
+| `pointing_device_set_report(mouse_report)`                 | Sets the mouse report to the assigned `report_mouse_t` data structured passed to the function.                |
 | `pointing_device_send(void)`                               | Sends the current mouse report to the host system.  Function can be replaced.                                 |
-| `has_mouse_report_changed(new_report, old_report)`         | Compares the old and new `mouse_report_t` data and returns true only if it has changed.                       |
+| `has_mouse_report_changed(new_report, old_report)`         | Compares the old and new `report_mouse_t` data and returns true only if it has changed.                       |
 | `pointing_device_adjust_by_defines(mouse_report)`          | Applies rotations and invert configurations to a raw mouse report.                                            |
 
 
@@ -344,9 +345,9 @@ The combined functions below are only available when using `SPLIT_POINTING_ENABL
 
 | Function                                                        | Description                                                                                                              |
 | --------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------ |
-| `pointing_device_set_shared_report(mouse_report)`               | Sets the shared mouse report to the assigned `mouse_report_t` data structured passed to the function.                    |
-| `pointing_device_set_cpi_on_side(bool, uint16_t)`               | Sets the CPI/DPI of one side, if supported. Passing `true` will set the left and `false` the right`                      |
-| `pointing_device_combine_reports(left_report, right_report)`    | Returns a combined mouse_report of left_report and right_report (as a `mouse_report_t` data structure)                   |
+| `pointing_device_set_shared_report(mouse_report)`               | Sets the shared mouse report to the assigned `report_mouse_t` data structured passed to the function.                    |
+| `pointing_device_set_cpi_on_side(bool, uint16_t)`               | Sets the CPI/DPI of one side, if supported. Passing `true` will set the left and `false` the right                       |
+| `pointing_device_combine_reports(left_report, right_report)`    | Returns a combined mouse_report of left_report and right_report (as a `report_mouse_t` data structure)                   |
 | `pointing_device_task_combined_kb(left_report, right_report)`   | Callback, so keyboard code can intercept and modify the data. Returns a combined mouse report.                           |
 | `pointing_device_task_combined_user(left_report, right_report)` | Callback, so user code can intercept and modify. Returns a combined mouse report using `pointing_device_combine_reports` |
 | `pointing_device_adjust_by_defines_right(mouse_report)`         | Applies right side rotations and invert configurations to a raw mouse report.                                            |
@@ -487,3 +488,243 @@ report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, re
     return pointing_device_combine_reports(left_report, right_report);
 }
 ```
+
+# Troubleshooting
+
+If you are having issues with pointing device drivers debug messages can be enabled that will give you insights in the inner workings. To enable these add to your keyboards `config.h` file:
+
+```c
+#define POINTING_DEVICE_DEBUG
+```
+ 
+?> The messages will be printed out to the `CONSOLE` output. For additional information, refer to [Debugging/Troubleshooting QMK](faq_debug.md).
+
+
+---
+# Automatic Mouse Layer :id=pointing-device-auto-mouse
+
+When using a pointing device combined with a keyboard the mouse buttons are often kept on a separate layer from the default keyboard layer, which requires pressing or holding a key to change layers before using the mouse. To make this easier and more efficient an additional pointing device feature may be enabled that will automatically activate a target layer as soon as the pointing device is active _(in motion, mouse button pressed etc.)_ and deactivate the target layer after a set time.   
+
+Additionally if any key that is defined as a mouse key is pressed then the layer will be held as long as the key is pressed and the timer will be reset on key release. When a non-mouse key is pressed then the layer is deactivated early _(with some exceptions see below)_.  Mod, mod tap, and one shot mod keys are ignored _(i.e. don't hold or activate layer but do not deactivate the layer either)_ when sending a modifier keycode _(e.g. hold for mod tap)_ allowing for mod keys to be used with the mouse without activating the target layer when typing.
+
+All of the standard layer keys (tap toggling, toggle, toggle on, one_shot, layer tap, layer mod) that activate the current target layer are uniquely handled to ensure they behave as expected _(see layer key table below)_. The target layer that can be changed at any point during by calling the `set_auto_mouse_layer(<new_target_layer>);` function.
+
+### Behaviour of Layer keys that activate the target layer
+| Layer key as in `keymap.c` | Auto Mouse specific behaviour                                                                                         |
+| -------------------------- | --------------------------------------------------------------------------------------------------------------------- |
+| `MO(<target_layer>)`       | Treated as a mouse key holding the layer while pressed                                                                |
+| `LT(<target_layer>)`       | When tapped will be treated as non mouse key and mouse key when held                                                  |
+| `LM(<target_layer>)`       | Treated as a mouse key                                                                                                |
+| `TG(<target_layer>)`       | Will set flag preventing target layer deactivation or removal until pressed again                                     |
+| `TO(<target_layer>)`       | Same as `TG(<target_layer>)`                                                                                          |
+| `TT(<target_layer>)`       | Treated as a mouse key when `tap.count < TAPPING_TOGGLE` and as `TG` when `tap.count == TAPPING_TOGGLE`               |
+| `DF(<target_layer>)`       | Skips auto mouse key processing similar to mod keys                                                                   |
+| `OSL(<target_layer>)`      | Skips, but if current one shot layer is the target layer then it will prevent target layer deactivation or removal    |
+
+
+## How to enable:
+
+```c
+// in config.h:
+#define POINTING_DEVICE_AUTO_MOUSE_ENABLE
+// only required if not setting mouse layer elsewhere
+#define AUTO_MOUSE_DEFAULT_LAYER <index of your mouse layer>
+
+// in keymap.c:
+void pointing_device_init_user(void) {
+    set_auto_mouse_layer(<mouse_layer>); // only required if AUTO_MOUSE_DEFAULT_LAYER is not set to index of <mouse_layer>
+    set_auto_mouse_enable(true);         // always required before the auto mouse feature will work
+}
+```
+
+Because the auto mouse feature can be disabled/enabled during runtime and starts as disabled by default it must be enabled by calling `set_auto_mouse_enable(true);` somewhere in firmware before the feature will work.   
+_Note: for setting the target layer during initialization either setting `AUTO_MOUSE_DEFAULT_LAYER` in `config.h` or calling `set_auto_mouse_layer(<mouse_layer>)` can be used._   
+
+
+## How to Customize:
+
+There are a few ways to control the auto mouse feature with both `config.h` options and functions for controlling it during runtime.
+
+### `config.h` Options:
+| Define                              | Description                                                           |         Range        |    Units    |                    Default |
+| ----------------------------------- | --------------------------------------------------------------------- | :------------------: | :---------: | -------------------------: |
+| `POINTING_DEVICE_AUTO_MOUSE_ENABLE` | (Required) Enables auto mouse layer feature                           |                      |   _None_    |              _Not defined_ |
+| `AUTO_MOUSE_DEFAULT_LAYER`          | (Optional) Index of layer to use as default target layer              |    0 - `LAYER_MAX`   | _`uint8_t`_ |                        `1` |
+| `AUTO_MOUSE_TIME`                   | (Optional) Time layer remains active after activation                 | _ideally_ (250-1000) |     _ms_    |                   `650 ms` |
+| `AUTO_MOUSE_DELAY`                  | (Optional) Lockout time after non-mouse key is pressed                | _ideally_ (100-1000) |     _ms_    | `TAPPING_TERM` or `200 ms` |
+| `AUTO_MOUSE_DEBOUNCE`               | (Optional) Time delay from last activation to next update             | _ideally_ (10 - 100) |     _ms_    |                    `25 ms` |
+
+### Adding mouse keys
+
+While all default mouse keys and layer keys(for current mouse layer) are treated as mouse keys, additional Keyrecords can be added to mouse keys by adding them to the is_mouse_record_* stack. 
+
+#### Callbacks for setting up additional key codes as mouse keys:
+| Callback                                                             | Description                                        |
+| -------------------------------------------------------------------- | -------------------------------------------------- |
+| `bool is_mouse_record_kb(uint16_t keycode, keyrecord_t* record)`     |  keyboard level callback for adding mouse keys     |
+| `bool is_mouse_record_user(uint16_t keycode, keyrecord_t* record)`   |  user/keymap level callback for adding mouse keys  |
+
+##### To use the callback function to add mouse keys:   
+
+The following code will cause the enter key and all of the arrow keys to be treated as mouse keys (hold target layer while they are pressed and reset active layer timer).
+```c
+
+// in <keyboard>.c:
+bool is_mouse_record_kb(uint16_t keycode, keyrecord_t* record) {
+    switch(keycode) {
+        case KC_ENT:
+            return true;
+        case KC_RIGHT ... KC_UP:
+            return true;
+        default:
+            return false;
+    }
+    return  is_mouse_record_user(keycode, record);
+}
+```
+
+
+## Advanced control
+
+There are several functions that allow for more advanced interaction with the auto mouse feature allowing for greater control.
+
+### Functions to control auto mouse enable and target layer:   
+| Function                                                   | Description                                                                          | Aliases                   |     Return type |
+| :--------------------------------------------------------- | ------------------------------------------------------------------------------------ | ------------------------- | --------------: |
+| `set_auto_mouse_enable(bool enable)`                       | Enable or disable auto mouse (true:enable, false:disable)                            |                           |    `void`(None) |
+| `get_auto_mouse_enable(void)`                              | Return auto mouse enable state (true:enabled, false:disabled)                        | `AUTO_MOUSE_ENABLED`      |          `bool` |
+| `set_auto_mouse_layer(uint8_t LAYER)`                      | Change/set the target layer for auto mouse                                           |                           |    `void`(None) |
+| `get_auto_mouse_layer(void)`                               | Return auto mouse target layer index                                                 | `AUTO_MOUSE_TARGET_LAYER` |       `uint8_t` |
+| `remove_auto_mouse_layer(layer_state_t state, bool force)` | Return `state` with target layer removed if appropriate (ignore criteria if `force`) |                           | `layer_state_t` |
+| `auto_mouse_layer_off(void)`                               | Disable target layer if appropriate will call (makes call to `layer_state_set`)      |                           |   `void`(None)  |
+| `auto_mouse_toggle(void)`                                  | Toggle on/off target toggle state (disables layer deactivation when true)            |                           |    `void`(None) |
+| `get_auto_mouse_toggle(void)`                              | Return value of toggling state variable                                              |                           |          `bool` |
+
+_NOTES:_   
+    - _Due to the nature of how some functions work, the `auto_mouse_trigger_reset`, and `auto_mouse_layer_off` functions should never be called in the `layer_state_set_*` stack as this can cause indefinite loops._   
+    - _It is recommended that `remove_auto_mouse_layer` is used in the `layer_state_set_*` stack of functions and `auto_mouse_layer_off` is used everywhere else_   
+    - _`remove_auto_mouse_layer(state, false)` or `auto_mouse_layer_off()` should be called before any instance of `set_auto_mouse_enabled(false)` or `set_auto_mouse_layer(layer)` to ensure that the target layer will be removed appropriately before disabling auto mouse or changing target to avoid a stuck layer_      
+    
+### Functions for handling custom key events:   
+| Function                                                   | Description                                                                      |     Return type |
+| :--------------------------------------------------------- | -------------------------------------------------------------------------------- | --------------: |
+| `auto_mouse_keyevent(bool pressed)`                        | Auto mouse mouse key event (true: key down, false: key up)                       |    `void`(None) |
+| `auto_mouse_trigger_reset(bool pressed)`                   | Reset auto mouse status on key down and start delay timer (non-mouse key event)  |    `void`(None) |
+| `auto_mouse_toggle(void)`                                  | Toggle on/off target toggle state (disables layer deactivation when true)        |    `void`(None) |
+| `get_auto_mouse_toggle(void)`                              | Return value of toggling state variable                                          |          `bool` |   
+_NOTE: Generally it would be preferable to use the `is_mouse_record_*` functions to add any additional keys that should act as mouse keys rather than adding `auto_mouse_keyevent(record.event->pressed)` to `process_records_*`_
+
+### Advanced control examples   
+
+#### Disable auto mouse on certain layers:   
+
+The auto mouse feature can be disabled any time and this can be helpful if you want to disable the auto mouse feature under certain circumstances such as when particular layers are active. One issue however is the handling of the target layer, it needs to be removed appropriately **before** disabling auto mouse _(see notes under control functions above)_. The following function would disable the auto_mouse feature whenever the layers `_LAYER5` through `_LAYER7` are active as the top most layer _(ignoring target layer)_.   
+
+```c
+// in keymap.c:
+layer_state_t layer_state_set_user(layer_state_t state) {
+    // checks highest layer other than target layer
+    switch(get_highest_layer(remove_auto_mouse_layer(state, true))) {
+        case _LAYER5 ... _LAYER7:
+            // remove_auto_mouse_target must be called to adjust state *before* setting enable
+            state = remove_auto_mouse_layer(state, false);
+            set_auto_mouse_enable(false);
+            break;
+        default:
+            set_auto_mouse_enable(true);
+            break;
+    }
+    // recommend that any code that makes adjustment based on auto mouse layer state would go here
+    return state;
+}
+```
+
+#### Set different target layer when a particular layer is active:
+
+The below code will change the auto mouse layer target to `_MOUSE_LAYER_2` when `_DEFAULT_LAYER_2` is highest default layer state.   
+*NOTE: that `auto_mouse_layer_off` is used here instead of `remove_auto_mouse_layer` as `default_layer_state_set_*` stack is separate from the `layer_state_set_*` stack* if something similar was to be done in `layer_state_set_user `state = remove_auto_mouse_layer(state, false)` should be used instead    
+*ADDITIONAL NOTE: `AUTO_MOUSE_TARGET_LAYER` is checked if already set to avoid deactivating the target layer unless needed*   
+
+```c
+// in keymap.c
+layer_state_t default_layer_state_set_user(layer_state_t state) {
+    // switch on change in default layer need to check if target layer already set to avoid turning off layer needlessly
+    switch(get_highest_layer(state)) {
+        case _DEFAULT_LAYER_2:
+            if ((AUTO_MOUSE_TARGET_LAYER) == _MOUSE_LAYER_2) break;
+            auto_mouse_layer_off();
+            set_auto_mouse_layer(_MOUSE_LAYER_2);
+            break;
+        
+        default:
+            if((AUTO_MOUSE_TARGET_LAYER) == _MOUSE_LAYER_1) break;
+            auto_mouse_layer_off();
+            set_auto_mouse_layer(_MOUSE_LAYER_1);
+    }
+    return state;
+}
+```
+
+### Use custom keys to control auto mouse:  
+Custom key records could also be created that control the auto mouse feature.   
+The code example below would create a custom key that would toggle the auto mouse feature on and off when pressed while also setting a bool that could be used to disable other code that may turn it on such as the layer code above.   
+
+```c
+// in config.h:
+enum user_custom_keycodes {
+    AM_Toggle = SAFE_RANGE
+};
+
+// in keymap.c:
+// set up global bool to adjust other user code
+bool auto_mouse_tg_off = !AUTO_MOUSE_ENABLED;
+
+bool process_record_user(uint16_t keycode, keyrecord_t* record) {
+    switch (keycode) {
+        // toggle auto mouse enable key
+        case AM_Toggle:
+            if(record->event.pressed) { // key down
+                auto_mouse_layer_off(); // disable target layer if needed
+                set_auto_mouse_enabled((AUTO_MOUSE_ENABLED) ^ 1);
+                auto_mouse_tg_off = !get_auto_mouse_enabled();
+            } // do nothing on key up
+            return false; // prevent further processing of keycode
+    }
+}
+```
+
+
+## Customize Target Layer Activation
+
+Layer activation can be customized by overwriting the `auto_mouse_activation` function. This function is checked every time `pointing_device_task` is called when inactive and every `AUTO_MOUSE_DEBOUNCE` ms when active, and will evaluate pointing device level conditions that trigger target layer activation. When it returns true, the target layer will be activated barring the usual exceptions _(e.g. delay time has not expired)_.   
+
+By default it will return true if any of the `mouse_report` axes `x`,`y`,`h`,`v` are non zero, or if there is any mouse buttons active in `mouse_report`.
+_Note: The Cirque pinnacle track pad already implements a custom activation function that will activate on touchdown as well as movement all of the default conditions, currently this only works for the master side of split keyboards._
+ 
+| Function                                                   | Description                                                                      |     Return type |
+| :--------------------------------------------------------- | -------------------------------------------------------------------------------- | --------------: |
+| `auto_mouse_activation(report_mouse_t mouse_report)`       | Overwritable function that controls target layer activation (when true)          |          `bool` |
+
+## Auto Mouse for Custom Pointing Device Task
+
+When using a custom pointing device (overwriting `pointing_device_task`) the following code should be somewhere in the `pointing_device_task_*` stack:
+
+```c
+void pointing_device_task(void) {
+    //...Custom pointing device task code
+    
+    // handle automatic mouse layer (needs report_mouse_t as input)
+    pointing_device_task_auto_mouse(local_mouse_report);
+    
+    //...More custom pointing device task code
+    
+    pointing_device_send();
+}
+```
+
+In general the following two functions must be implemented in appropriate locations for auto mouse to function:
+
+| Function                                                       | Description                                                  |           Suggested location |
+| -------------------------------------------------------------- | ------------------------------------------------------------ | ---------------------------: |
+| `pointing_device_task_auto_mouse(report_mouse_t mouse_report)` | handles target layer activation and is_active status updates | `pointing_device_task` stack |
+| `process_auto_mouse(uint16_t keycode, keyrecord_t* record)`    | Keycode processing for auto mouse                            |       `process_record` stack |

docs/feature_programmable_button.md

@@ -1,74 +1,144 @@
-## Programmable Button
+# Programmable Button :id=programmable-button
 
-Programmable button is a feature that can be used to send keys that have no
-predefined meaning.
-This means they can be processed on the host side by custom software without
-colliding without the operating system trying to interpret these keys.
+Programmable Buttons are keys that have no predefined meaning. This means they can be processed on the host side by custom software without the operating system trying to interpret them.
 
-The keycodes are emitted according to the HID usage
-"Telephony Device Page" (0x0B), "Programmable button usage" (0x07).
-On Linux (> 5.14) they are handled automatically and translated to `KEY_MACRO#`
-keycodes.
-(Up to `KEY_MACRO30`)
+The keycodes are emitted according to the HID Telephony Device page (`0x0B`), Programmable Button usage (`0x07`). On Linux (> 5.14) they are handled automatically and translated to `KEY_MACRO#` keycodes (up to `KEY_MACRO30`).
 
-### Enabling Programmable Button support
+?> Currently there is no known support in Windows or macOS. It may be possible to write a custom HID driver to receive these usages, but this is out of the scope of the QMK documentation.
 
-To enable Programmable Button, add the following line to your keymap’s `rules.mk`:
+## Usage :id=usage
 
-```c
+Add the following to your `rules.mk`:
+
+```make
 PROGRAMMABLE_BUTTON_ENABLE = yes
 ```
 
-### Mapping
+## Keycodes :id=keycodes
 
-In your keymap you can use the following keycodes to map key presses to Programmable Buttons:
+|Key                        |Aliases|Description           |
+|---------------------------|-------|----------------------|
+|`QK_PROGRAMMABLE_BUTTON_1` |`PB_1` |Programmable button 1 |
+|`QK_PROGRAMMABLE_BUTTON_2` |`PB_2` |Programmable button 2 |
+|`QK_PROGRAMMABLE_BUTTON_3` |`PB_3` |Programmable button 3 |
+|`QK_PROGRAMMABLE_BUTTON_4` |`PB_4` |Programmable button 4 |
+|`QK_PROGRAMMABLE_BUTTON_5` |`PB_5` |Programmable button 5 |
+|`QK_PROGRAMMABLE_BUTTON_6` |`PB_6` |Programmable button 6 |
+|`QK_PROGRAMMABLE_BUTTON_7` |`PB_7` |Programmable button 7 |
+|`QK_PROGRAMMABLE_BUTTON_8` |`PB_8` |Programmable button 8 |
+|`QK_PROGRAMMABLE_BUTTON_9` |`PB_9` |Programmable button 9 |
+|`QK_PROGRAMMABLE_BUTTON_10`|`PB_10`|Programmable button 10|
+|`QK_PROGRAMMABLE_BUTTON_11`|`PB_11`|Programmable button 11|
+|`QK_PROGRAMMABLE_BUTTON_12`|`PB_12`|Programmable button 12|
+|`QK_PROGRAMMABLE_BUTTON_13`|`PB_13`|Programmable button 13|
+|`QK_PROGRAMMABLE_BUTTON_14`|`PB_14`|Programmable button 14|
+|`QK_PROGRAMMABLE_BUTTON_15`|`PB_15`|Programmable button 15|
+|`QK_PROGRAMMABLE_BUTTON_16`|`PB_16`|Programmable button 16|
+|`QK_PROGRAMMABLE_BUTTON_17`|`PB_17`|Programmable button 17|
+|`QK_PROGRAMMABLE_BUTTON_18`|`PB_18`|Programmable button 18|
+|`QK_PROGRAMMABLE_BUTTON_19`|`PB_19`|Programmable button 19|
+|`QK_PROGRAMMABLE_BUTTON_20`|`PB_20`|Programmable button 20|
+|`QK_PROGRAMMABLE_BUTTON_21`|`PB_21`|Programmable button 21|
+|`QK_PROGRAMMABLE_BUTTON_22`|`PB_22`|Programmable button 22|
+|`QK_PROGRAMMABLE_BUTTON_23`|`PB_23`|Programmable button 23|
+|`QK_PROGRAMMABLE_BUTTON_24`|`PB_24`|Programmable button 24|
+|`QK_PROGRAMMABLE_BUTTON_25`|`PB_25`|Programmable button 25|
+|`QK_PROGRAMMABLE_BUTTON_26`|`PB_26`|Programmable button 26|
+|`QK_PROGRAMMABLE_BUTTON_27`|`PB_27`|Programmable button 27|
+|`QK_PROGRAMMABLE_BUTTON_28`|`PB_28`|Programmable button 28|
+|`QK_PROGRAMMABLE_BUTTON_29`|`PB_29`|Programmable button 29|
+|`QK_PROGRAMMABLE_BUTTON_30`|`PB_30`|Programmable button 30|
+|`QK_PROGRAMMABLE_BUTTON_31`|`PB_31`|Programmable button 31|
+|`QK_PROGRAMMABLE_BUTTON_32`|`PB_32`|Programmable button 32|
 
-|Key                     |Description                                                     |
-|------------------------|----------------------|
-|`PROGRAMMABLE_BUTTON_1` |Programmable button 1 |
-|`PROGRAMMABLE_BUTTON_2` |Programmable button 2 |
-|`PROGRAMMABLE_BUTTON_3` |Programmable button 3 |
-|`PROGRAMMABLE_BUTTON_4` |Programmable button 4 |
-|`PROGRAMMABLE_BUTTON_5` |Programmable button 5 |
-|`PROGRAMMABLE_BUTTON_6` |Programmable button 6 |
-|`PROGRAMMABLE_BUTTON_7` |Programmable button 7 |
-|`PROGRAMMABLE_BUTTON_8` |Programmable button 8 |
-|`PROGRAMMABLE_BUTTON_9` |Programmable button 9 |
-|`PROGRAMMABLE_BUTTON_10`|Programmable button 10|
-|`PROGRAMMABLE_BUTTON_11`|Programmable button 11|
-|`PROGRAMMABLE_BUTTON_12`|Programmable button 12|
-|`PROGRAMMABLE_BUTTON_13`|Programmable button 13|
-|`PROGRAMMABLE_BUTTON_14`|Programmable button 14|
-|`PROGRAMMABLE_BUTTON_15`|Programmable button 15|
-|`PROGRAMMABLE_BUTTON_16`|Programmable button 16|
-|`PROGRAMMABLE_BUTTON_17`|Programmable button 17|
-|`PROGRAMMABLE_BUTTON_18`|Programmable button 18|
-|`PROGRAMMABLE_BUTTON_19`|Programmable button 19|
-|`PROGRAMMABLE_BUTTON_20`|Programmable button 20|
-|`PROGRAMMABLE_BUTTON_21`|Programmable button 21|
-|`PROGRAMMABLE_BUTTON_22`|Programmable button 22|
-|`PROGRAMMABLE_BUTTON_23`|Programmable button 23|
-|`PROGRAMMABLE_BUTTON_24`|Programmable button 24|
-|`PROGRAMMABLE_BUTTON_25`|Programmable button 25|
-|`PROGRAMMABLE_BUTTON_26`|Programmable button 26|
-|`PROGRAMMABLE_BUTTON_27`|Programmable button 27|
-|`PROGRAMMABLE_BUTTON_28`|Programmable button 28|
-|`PROGRAMMABLE_BUTTON_29`|Programmable button 29|
-|`PROGRAMMABLE_BUTTON_30`|Programmable button 30|
-|`PROGRAMMABLE_BUTTON_31`|Programmable button 31|
-|`PROGRAMMABLE_BUTTON_32`|Programmable button 32|
-|`PB_1` to `PB_32`       |Aliases for keymaps   |
+## API :id=api
 
-### API
+### `void programmable_button_clear(void)` :id=api-programmable-button-clear
 
-You can also use a dedicated API defined in `programmable_button.h` to interact with this feature:
+Clear the programmable button report.
 
-```
-void programmable_button_clear(void);
-void programmable_button_send(void);
-void programmable_button_on(uint8_t code);
-void programmable_button_off(uint8_t code);
-bool programmable_button_is_on(uint8_t code);
-uint32_t programmable_button_get_report(void);
-void programmable_button_set_report(uint32_t report);
-```
+---
+
+### `void programmable_button_add(uint8_t index)` :id=api-programmable-button-add
+
+Set the state of a button.
+
+#### Arguments :id=api-programmable-button-add-arguments
+
+ - `uint8_t index`  
+   The index of the button to press, from 0 to 31.
+
+---
+
+### `void programmable_button_remove(uint8_t index)` :id=api-programmable-button-remove
+
+Reset the state of a button.
+
+#### Arguments :id=api-programmable-button-remove-arguments
+
+ - `uint8_t index`  
+   The index of the button to release, from 0 to 31.
+
+---
+
+### `void programmable_button_register(uint8_t index)` :id=api-programmable-button-register
+
+Set the state of a button, and flush the report.
+
+#### Arguments :id=api-programmable-button-register-arguments
+
+ - `uint8_t index`  
+   The index of the button to press, from 0 to 31.
+
+---
+
+### `void programmable_button_unregister(uint8_t index)` :id=api-programmable-button-unregister
+
+Reset the state of a button, and flush the report.
+
+#### Arguments :id=api-programmable-button-unregister-arguments
+
+ - `uint8_t index`  
+   The index of the button to release, from 0 to 31.
+
+---
+
+### `bool programmable_button_is_on(uint8_t index)` :id=api-programmable-button-is-on
+
+Get the state of a button.
+
+#### Arguments :id=api-programmable-button-is-on-arguments
+
+ - `uint8_t index`  
+   The index of the button to check, from 0 to 31.
+
+#### Return Value :id=api-programmable-button-is-on-return
+
+`true` if the button is pressed.
+
+---
+
+### `void programmable_button_flush(void)` :id=api-programmable-button-flush
+
+Send the programmable button report to the host.
+
+---
+
+### `uint32_t programmable_button_get_report(void)` :id=api-programmable-button-get-report
+
+Get the programmable button report.
+
+#### Return Value :id=api-programmable-button-get-report-return
+
+The bitmask of programmable button states.
+
+---
+
+### `void programmable_button_set_report(uint32_t report)` :id=api-programmable-button-set-report
+
+Set the programmable button report.
+
+#### Arguments :id=api-programmable-button-set-report-arguments
+
+ - `uint32_t report`  
+   A bitmask of programmable button states.

docs/feature_ps2_mouse.md

@@ -32,13 +32,14 @@ In rules.mk:
 
 ```make
 PS2_MOUSE_ENABLE = yes
-PS2_USE_BUSYWAIT = yes
+PS2_ENABLE = yes
+PS2_DRIVER = busywait
 ```
 
 In your keyboard config.h:
 
 ```c
-#ifdef PS2_USE_BUSYWAIT
+#ifdef PS2_DRIVER_BUSYWAIT
 #   define PS2_CLOCK_PIN   D1
 #   define PS2_DATA_PIN    D2
 #endif
@@ -52,13 +53,14 @@ In rules.mk:
 
 ```make
 PS2_MOUSE_ENABLE = yes
-PS2_USE_INT = yes
+PS2_ENABLE = yes
+PS2_DRIVER = interrupt
 ```
 
 In your keyboard config.h:
 
 ```c
-#ifdef PS2_USE_INT
+#ifdef PS2_DRIVER_INTERRUPT
 #define PS2_CLOCK_PIN   D2
 #define PS2_DATA_PIN    D5
 
@@ -84,7 +86,8 @@ In rules.mk:
 
 ```
 PS2_MOUSE_ENABLE = yes
-PS2_USE_INT = yes
+PS2_ENABLE = yes
+PS2_DRIVER = interrupt
 ```
 
 In your keyboard config.h:
@@ -108,13 +111,14 @@ In rules.mk:
 
 ```make
 PS2_MOUSE_ENABLE = yes
-PS2_USE_USART = yes
+PS2_ENABLE = yes
+PS2_DRIVER = usart
 ```
 
 In your keyboard config.h:
 
 ```c
-#ifdef PS2_USE_USART
+#ifdef PS2_DRIVER_USART
 #define PS2_CLOCK_PIN   D5
 #define PS2_DATA_PIN    D2
 

docs/feature_rgb_matrix.md

@@ -23,7 +23,7 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `DRIVER_ADDR_<N>` de
 | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
 | `ISSI_3731_DEGHOST` | (Optional) Set this define to enable de-ghosting by halving Vcc during blanking time | |
 | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
-| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
 | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
 | `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
@@ -45,17 +45,17 @@ Here is an example using 2 drivers.
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 25
 #define DRIVER_2_LED_TOTAL 24
-#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 ```
 
-!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+!> Note the parentheses, this is so when `RGB_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
 
 For split keyboards using `RGB_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31_leds`.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *   driver
  *   |  R location
@@ -90,7 +90,7 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de
 | `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
 | `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
 | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
-| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
 | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
 | `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
@@ -131,17 +131,17 @@ Here is an example using 2 drivers.
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 58
 #define DRIVER_2_LED_TOTAL 10
-#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 ```
 
-!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+!> Note the parentheses, this is so when `RGB_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
 
 Currently only 4 drivers are supported, but it would be trivial to support all 8 combinations.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *   driver
  *   |  R location
@@ -164,7 +164,7 @@ There is basic support for addressable RGB matrix lighting with the I2C IS31FL37
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = IS31FL3737
 ```
-You can use between 1 and 2 IS31FL3737 IC's. Do not specify `DRIVER_ADDR_2` define for second IC if not present on your keyboard.
+You can use between 1 and 4 IS31FL3737 IC's. Do not specify `DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard.
 
 Configure the hardware via your `config.h`:
 
@@ -177,9 +177,11 @@ Configure the hardware via your `config.h`:
 | `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
 | `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
 | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
-| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
 | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
+| `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
+| `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | |
 
 The IS31FL3737 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows:
 
@@ -212,16 +214,16 @@ Here is an example using 2 drivers.
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 30
 #define DRIVER_2_LED_TOTAL 36
-#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 ```
-!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+!> Note the parentheses, this is so when `RGB_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
 
 Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *   driver
  *   |  R location
@@ -233,7 +235,7 @@ const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
 }
 ```
 
-Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3737.pdf) and the header file `drivers/led/issi/is31fl3737.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0`, `1` for now).
+Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3737.pdf) and the header file `drivers/led/issi/is31fl3737.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0`, `1`, `2`, or `3` for now).
 
 ---
 ### IS31FLCOMMON :id=is31flcommon
@@ -263,14 +265,14 @@ Configure the hardware via your `config.h`:
 | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
 | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
 | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
-| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Optional) Address for the first RGB driver | |
 | `DRIVER_ADDR_<N>` | (Required) Address for the additional RGB drivers | |
 | `ISSI_SSR_<N>` | (Optional) Configuration for the Spread Spectrum Register | |
 | `ISSI_CONFIGURATION` | (Optional) Configuration for the Configuration Register | |
 | `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
 | `ISSI_PULLDOWNUP` | (Optional) Configuration for the Pull Up & Pull Down Register | |
-| `ISSI_TEMP` | (Optional) Configuration for the Tempature Register | |
+| `ISSI_TEMP` | (Optional) Configuration for the Temperature Register | |
 | `ISSI_PWM_ENABLE` | (Optional) Configuration for the PWM Enable Register | |
 | `ISSI_PWM_SET` | (Optional) Configuration for the PWM Setting Register | |
 | `ISSI_SCAL_RED` | (Optional) Configuration for the RED LEDs in Scaling Registers | 0xFF |
@@ -300,17 +302,17 @@ Here is an example using 2 drivers.
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 66
 #define DRIVER_2_LED_TOTAL 42
-#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 ```
 
-!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+!> Note the parentheses, this is so when `RGB_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
 
 Currently only 4 drivers are supported, but it would be trivial to support for more. Note that using a combination of different drivers is not supported. All drivers must be of the same model.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led __flash g_is31_leds[RGB_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *   driver
  *   |  R location
@@ -361,7 +363,7 @@ Configure the hardware via your `config.h`:
 // The pin connected to the data pin of the LEDs
 #define RGB_DI_PIN D7
 // The number of LEDs connected
-#define DRIVER_LED_TOTAL 70
+#define RGB_MATRIX_LED_COUNT 70
 ```
 
 ?> There are additional configuration options for ARM controllers that offer increased performance over the default bitbang driver. Please see [WS2812 Driver](ws2812_driver.md) for more information.
@@ -385,7 +387,7 @@ Configure the hardware via your `config.h`:
 // The pin connected to the clock pin of the LEDs
 #define RGB_CI_PIN D6
 // The number of LEDs connected
-#define DRIVER_LED_TOTAL 70
+#define RGB_MATRIX_LED_COUNT 70
 ```
 
 ---
@@ -408,7 +410,7 @@ You can use up to 2 AW20216 IC's. Do not specify `DRIVER_<N>_xxx` defines for IC
 | `DRIVER_1_LED_TOTAL` | (Required) How many RGB lights are connected to first RGB driver  | |
 | `DRIVER_2_LED_TOTAL` | (Optional) How many RGB lights are connected to second RGB driver  | |
 | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
-| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `AW_SCALING_MAX` | (Optional) LED current scaling value (0-255, higher values mean LED is brighter at full PWM) | 150 |
 | `AW_GLOBAL_CURRENT_MAX` | (Optional) Driver global current limit (0-255, higher values means the driver may consume more power) | 150 |
 | `AW_SPI_MODE` | (Optional) Mode for SPI communication (0-3, defines polarity and phase of the clock) | 3 |
@@ -426,15 +428,15 @@ Here is an example using 2 drivers.
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 66
 #define DRIVER_2_LED_TOTAL 32
-#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 ```
 
-!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+!> Note the parentheses, this is so when `RGB_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const aw_led PROGMEM g_aw_leds[DRIVER_LED_TOTAL] = {
+const aw_led PROGMEM g_aw_leds[RGB_MATRIX_LED_COUNT] = {
 /* Each AW20216 channel is controlled by a register at some offset between 0x00
  * and 0xD7 inclusive.
  * See drivers/awinic/aw20216.h for the mapping between register offsets and
@@ -560,7 +562,7 @@ enum rgb_matrix_effects {
     RGB_MATRIX_CYCLE_UP_DOWN,       // Full gradient scrolling top to bottom
     RGB_MATRIX_CYCLE_OUT_IN,        // Full gradient scrolling out to in
     RGB_MATRIX_CYCLE_OUT_IN_DUAL,   // Full dual gradients scrolling out to in
-    RGB_MATRIX_RAINBOW_MOVING_CHEVRON,  // Full gradent Chevron shapped scrolling left to right
+    RGB_MATRIX_RAINBOW_MOVING_CHEVRON,  // Full gradient Chevron shapped scrolling left to right
     RGB_MATRIX_CYCLE_PINWHEEL,      // Full gradient spinning pinwheel around center of keyboard
     RGB_MATRIX_CYCLE_SPIRAL,        // Full gradient spinning spiral around center of keyboard
     RGB_MATRIX_DUAL_BEACON,         // Full gradient spinning around center of keyboard
@@ -791,17 +793,16 @@ These are defined in [`color.h`](https://github.com/qmk/qmk_firmware/blob/master
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS // enable framebuffer effects
-#define RGB_DISABLE_TIMEOUT 0 // number of milliseconds to wait until rgb automatically turns off
-#define RGB_DISABLE_AFTER_TIMEOUT 0 // OBSOLETE: number of ticks to wait until disabling effects
+#define RGB_MATRIX_TIMEOUT 0 // number of milliseconds to wait until rgb automatically turns off
 #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
-#define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+#define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
-#define RGB_MATRIX_STARTUP_HUE 0 // Sets the default hue value, if none has been set
-#define RGB_MATRIX_STARTUP_SAT 255 // Sets the default saturation value, if none has been set
-#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
-#define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
+#define RGB_MATRIX_DEFAULT_HUE 0 // Sets the default hue value, if none has been set
+#define RGB_MATRIX_DEFAULT_SAT 255 // Sets the default saturation value, if none has been set
+#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
+#define RGB_MATRIX_DEFAULT_SPD 127 // Sets the default animation speed, if none has been set
 #define RGB_MATRIX_DISABLE_KEYCODES // disables control of rgb matrix by keycodes (must use code functions to control the feature)
 #define RGB_MATRIX_SPLIT { X, Y } 	// (Optional) For split keyboards, the number of LEDs connected on each half. X = left, Y = Right.
                               		// If RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR
@@ -824,7 +825,7 @@ Where `28` is an unused index from `eeconfig.h`.
 |Function                                    |Description  |
 |--------------------------------------------|-------------|
 |`rgb_matrix_set_color_all(r, g, b)`         |Set all of the LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
-|`rgb_matrix_set_color(index, r, g, b)`      |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255, and `index` is between 0 and `DRIVER_LED_TOTAL` (not written to EEPROM) |
+|`rgb_matrix_set_color(index, r, g, b)`      |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255, and `index` is between 0 and `RGB_MATRIX_LED_COUNT` (not written to EEPROM) |
 
 ### Disable/Enable Effects :id=disable-enable-effects
 |Function                                    |Description  |
@@ -889,16 +890,21 @@ Where `28` is an unused index from `eeconfig.h`.
 
 If you want to set custom indicators, such as an LED for Caps Lock, or layer indication, you can use the `rgb_matrix_indicators_kb` or `rgb_matrix_indicators_user` function for that:
 ```c
-void rgb_matrix_indicators_kb(void) {
+bool rgb_matrix_indicators_kb(void) {
+    if (!rgb_matrix_indicators_user()) {
+        return false;
+    }
     rgb_matrix_set_color(index, red, green, blue);
+    return true;
 }
 ```
 
 In addition, there are the advanced indicator functions.  These are aimed at those with heavily customized displays, where rendering every LED per cycle is expensive.  Such as some of the "drashna" layouts.  This includes a special macro to help make this easier to use: `RGB_MATRIX_INDICATOR_SET_COLOR(i, r, g, b)`.
 
 ```c
-void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+bool rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
     RGB_MATRIX_INDICATOR_SET_COLOR(index, red, green, blue);
+    return false;
 }
 ```
 
@@ -906,21 +912,22 @@ void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
 
 Caps Lock indicator on alphanumeric flagged keys:
 ```c
-void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+bool rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
     if (host_keyboard_led_state().caps_lock) {
-        for (uint8_t i = led_min; i <= led_max; i++) {
+        for (uint8_t i = led_min; i < led_max; i++) {
             if (g_led_config.flags[i] & LED_FLAG_KEYLIGHT) {
                 rgb_matrix_set_color(i, RGB_RED);
             }
         }
     }
+    return false;
 }
 ```
 
 Layer indicator on all keys:
 ```c
-void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
-    for (uint8_t i = led_min; i <= led_max; i++) {
+bool rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+    for (uint8_t i = led_min; i < led_max; i++) {
         switch(get_highest_layer(layer_state|default_layer_state)) {
             case 2:
                 rgb_matrix_set_color(i, RGB_BLUE);
@@ -932,12 +939,13 @@ void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
                 break;
         }
     }
+    return false;
 }
 ```
 
 Layer indicator only on keys with configured keycodes:
 ```c
-void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+bool rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
     if (get_highest_layer(layer_state) > 0) {
         uint8_t layer = get_highest_layer(layer_state);
 
@@ -945,13 +953,14 @@ void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
             for (uint8_t col = 0; col < MATRIX_COLS; ++col) {
                 uint8_t index = g_led_config.matrix_co[row][col];
 
-                if (index >= led_min && index <= led_max && index != NO_LED &&
+                if (index >= led_min && index < led_max && index != NO_LED &&
                 keymap_key_to_keycode(layer, (keypos_t){col,row}) > KC_TRNS) {
                     rgb_matrix_set_color(index, RGB_GREEN);
                 }
             }
         }
     }
+    return false;
 }
 ```
 
@@ -962,7 +971,7 @@ void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
 This example sets the modifiers to be a specific color based on the layer state.  You can use a switch case here, instead, if you would like.  This uses HSV and then converts to RGB, because this allows the brightness to be limited (important when using the WS2812 driver).
 
 ```c
-void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+bool rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
     HSV hsv = {0, 255, 255};
 
     if (layer_state_is(layer_state, 2)) {
@@ -976,23 +985,25 @@ void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
     }
     RGB rgb = hsv_to_rgb(hsv);
 
-    for (uint8_t i = led_min; i <= led_max; i++) {
+    for (uint8_t i = led_min; i < led_max; i++) {
         if (HAS_FLAGS(g_led_config.flags[i], 0x01)) { // 0x01 == LED_FLAG_MODIFIER
             rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
         }
     }
+    return false;
 }
 ```
 
 If you want to indicate a Host LED status (caps lock, num lock, etc), you can use something like this to light up the caps lock key:
 
 ```c
-void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+bool rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
     if (host_keyboard_led_state().caps_lock) {
         RGB_MATRIX_INDICATOR_SET_COLOR(5, 255, 255, 255); // assuming caps lock is at led #5
     } else {
         RGB_MATRIX_INDICATOR_SET_COLOR(5, 0, 0, 0);
     }
+    return false;
 }
 ```
 

docs/feature_rgblight.md

@@ -302,7 +302,7 @@ void keyboard_post_init_user(void) {
 // after the flag has been flipped...
 void post_process_record_user(uint16_t keycode, keyrecord_t *record) {
     switch (keycode) {
-        case DEBUG:
+        case QK_DEBUG_TOGGLE:
             rgblight_blink_layer(debug_enable ? 0 : 1, 500);
             break;
 
@@ -319,13 +319,13 @@ You can also use `rgblight_blink_layer_repeat` to specify the amount of times th
 ```c
 void post_process_record_user(uint16_t keycode, keyrecord_t *record) {
     switch (keycode) {
-        case DEBUG:
+        case QK_DEBUG_TOGGLE:
             rgblight_blink_layer_repeat(debug_enable ? 0 : 1, 200, 3);
             break;
     }
 }
 ```
-would turn the layer 0 (or 1) on and off again three times when `DEBUG` is pressed.
+would turn the layer 0 (or 1) on and off again three times when `DB_TOGG` is pressed.
 
 Blinking accumulates layers so if multiple layers are set blinking at the same time they will all blink for the duration and repeat times of the last layer to be blinked.
 To stop these other layers from blinking use `rgblight_unblink_layer` or `rgblight_unblink_all_but_layer`:

docs/feature_secure.md

@@ -26,12 +26,12 @@ SECURE_ENABLE = yes
 
 ## Keycodes
 
-| Key              | Description                                                                    |
-|------------------|--------------------------------------------------------------------------------|
-| `SECURE_LOCK`    | Revert back to a locked state                                                  |
-| `SECURE_UNLOCK`  | Forces unlock without performing a unlock sequence                             |
-| `SECURE_TOGGLE`  | Toggle directly between locked and unlock without performing a unlock sequence |
-| `SECURE_REQUEST` | Request that user perform the unlock sequence                                  |
+| Key                 |Aliases  | Description                                                                    |
+|---------------------|---------|--------------------------------------------------------------------------------|
+| `QK_SECURE_LOCK`    |`SE_LOCK`| Revert back to a locked state                                                  |
+| `QK_SECURE_UNLOCK`  |`SE_UNLK`| Forces unlock without performing a unlock sequence                             |
+| `QK_SECURE_TOGGLE`  |`SE_TOGG`| Toggle directly between locked and unlock without performing a unlock sequence |
+| `QK_SECURE_REQUEST` |`SE_REQ` | Request that user perform the unlock sequence                                  |
 
 ## Configuration
 

docs/feature_space_cadet.md

@@ -5,22 +5,22 @@ Steve Losh described the [Space Cadet Shift](https://stevelosh.com/blog/2012/10/
 ## Usage
 
 Firstly, in your keymap, do one of the following:
-- Replace the Left Shift key with `KC_LSPO` (Left Shift, Parenthesis Open), and Right Shift with `KC_RSPC` (Right Shift, Parenthesis Close).
-- Replace the Left Control key with `KC_LCPO` (Left Control, Parenthesis Open), and Right Control with `KC_RCPC` (Right Control, Parenthesis Close).
-- Replace the Left Alt key with `KC_LAPO` (Left Alt, Parenthesis Open), and Right Alt with `KC_RAPC` (Right Alt, Parenthesis Close).
-- Replace any Shift key in your keymap with `KC_SFTENT` (Right Shift, Enter).
+- Replace the Left Shift key with `SC_LSPO` (Left Shift, Parenthesis Open), and Right Shift with `SC_RSPC` (Right Shift, Parenthesis Close).
+- Replace the Left Control key with `SC_LCPO` (Left Control, Parenthesis Open), and Right Control with `SC_RCPC` (Right Control, Parenthesis Close).
+- Replace the Left Alt key with `SC_LAPO` (Left Alt, Parenthesis Open), and Right Alt with `SC_RAPC` (Right Alt, Parenthesis Close).
+- Replace any Shift key in your keymap with `SC_SENT` (Right Shift, Enter).
 
 ## Keycodes
 
-|Keycode    |Description                                |
-|-----------|-------------------------------------------|
-|`KC_LSPO`  |Left Shift when held, `(` when tapped      |
-|`KC_RSPC`  |Right Shift when held, `)` when tapped     |
-|`KC_LCPO`  |Left Control when held, `(` when tapped    |
-|`KC_RCPC`  |Right Control when held, `)` when tapped   |
-|`KC_LAPO`  |Left Alt when held, `(` when tapped        |
-|`KC_RAPC`  |Right Alt when held, `)` when tapped       |
-|`KC_SFTENT`|Right Shift when held, Enter when tapped   |
+|Keycode                                       |Aliases  |Description                             |
+|----------------------------------------------|---------|----------------------------------------|
+|`QK_SPACE_CADET_LEFT_CTRL_PARENTHESIS_OPEN`   |`SC_LCPO`|Left Control when held, `(` when tapped |
+|`QK_SPACE_CADET_RIGHT_CTRL_PARENTHESIS_CLOSE` |`SC_RCPC`|Right Control when held, `)` when tapped|
+|`QK_SPACE_CADET_LEFT_SHIFT_PARENTHESIS_OPEN`  |`SC_LSPO`|Left Shift when held, `(` when tapped   |
+|`QK_SPACE_CADET_RIGHT_SHIFT_PARENTHESIS_CLOSE`|`SC_RSPC`|Right Shift when held, `)` when tapped  |
+|`QK_SPACE_CADET_LEFT_ALT_PARENTHESIS_OPEN`    |`SC_LAPO`|Left Alt when held, `(` when tapped     |
+|`QK_SPACE_CADET_RIGHT_ALT_PARENTHESIS_CLOSE`  |`SC_RAPC`|Right Alt when held, `)` when tapped    |
+|`QK_SPACE_CADET_RIGHT_SHIFT_ENTER`            |`SC_SENT`|Right Shift when held, Enter when tapped|
 
 ## Caveats
 
@@ -32,7 +32,7 @@ COMMAND_ENABLE = no
 
 ## Configuration
 
-By default Space Cadet assumes a US ANSI layout, but if your layout uses different keys for parentheses, you can redefine them in your `config.h`. In addition, you can redefine the modifier to send on tap, or even send no modifier at all. The new configuration defines bundle all options up into a single define of 3 key codes in this order: the `Modifier` when held or when used with other keys, the `Tap Modifer` sent when tapped (no modifier if `KC_TRNS`), finally the `Keycode` sent when tapped. Now keep in mind, mods from other keys will still apply to the `Keycode` if say `KC_RSFT` is held while tapping `KC_LSPO` key with `KC_TRNS` as the `Tap Modifer`.
+By default Space Cadet assumes a US ANSI layout, but if your layout uses different keys for parentheses, you can redefine them in your `config.h`. In addition, you can redefine the modifier to send on tap, or even send no modifier at all. The new configuration defines bundle all options up into a single define of 3 key codes in this order: the `Modifier` when held or when used with other keys, the `Tap Modifer` sent when tapped (no modifier if `KC_TRNS`), finally the `Keycode` sent when tapped. Now keep in mind, mods from other keys will still apply to the `Keycode` if say `KC_RSFT` is held while tapping `SC_LSPO` key with `KC_TRNS` as the `Tap Modifer`.
 
 |Define          |Default                        |Description                                                                      |
 |----------------|-------------------------------|---------------------------------------------------------------------------------|
@@ -48,7 +48,7 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe
 
 ## Obsolete Configuration
 
-These defines are used in the above defines internally to support backwards compatibility, so you may continue to use them, however the above defines open up a larger range of flexibility than before. As an example, say you want to not send any modifier when you tap just `KC_LSPO`, with the old defines you had an all or nothing choice of using the `DISABLE_SPACE_CADET_MODIFIER` define. Now you can define that key as: `#define LSPO_KEYS KC_LSFT, KC_TRNS, KC_9`. This tells the system to set Left Shift if held or used with other keys, then on tap send no modifier (transparent) with the `KC_9`.
+These defines are used in the above defines internally to support backwards compatibility, so you may continue to use them, however the above defines open up a larger range of flexibility than before. As an example, say you want to not send any modifier when you tap just `SC_LSPO`, with the old defines you had an all or nothing choice of using the `DISABLE_SPACE_CADET_MODIFIER` define. Now you can define that key as: `#define LSPO_KEYS KC_LSFT, KC_TRNS, KC_9`. This tells the system to set Left Shift if held or used with other keys, then on tap send no modifier (transparent) with the `KC_9`.
 
 |Define                        |Default      |Description                                                       |
 |------------------------------|-------------|------------------------------------------------------------------|