variable scope fix for travis

change cmd-l and cmd-r for actual home and end

.travis.yml

@@ -5,12 +5,10 @@ language: c
 branches:
   except:
     - /^.*-automated-build$/
+    - /^[0-9]+\.[0-9]+\.[0-9]+/
 env:
   global:
   - secure: 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
-  matrix:
-  - TARGET=all-keyboards AUTOGEN=true
-  - TARGET=test AUTOGEN=false
 before_install:
   - wget http://www.atmel.com/images/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
 install:
@@ -19,7 +17,8 @@ install:
 before_script:
   - avr-gcc --version
 script:
-- make $TARGET AUTOGEN=$AUTOGEN
+- make test AUTOGEN=false
+- bash util/travis_build.sh
 addons:
   apt:
     packages:
@@ -30,6 +29,4 @@ addons:
     - libnewlib-arm-none-eabi
     - diffutils
 after_success: 
-  if [ "$AUTOGEN" == "true" ]; then
-    bash util/travis_compiled_push.sh;
-  fi
+  bash util/travis_compiled_push.sh

build_keyboard.mk

@@ -144,6 +144,11 @@ ifeq ($(strip $(MIDI_ENABLE)), yes)
 	SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c
 endif
 
+ifeq ($(strip $(COMBO_ENABLE)), yes)
+    OPT_DEFS += -DCOMBO_ENABLE
+	SRC += $(QUANTUM_DIR)/process_keycode/process_combo.c
+endif
+
 ifeq ($(strip $(VIRTSER_ENABLE)), yes)
     OPT_DEFS += -DVIRTSER_ENABLE
 endif

keyboards/lets_split/readme.md

@@ -74,6 +74,10 @@ not be very difficult to adapt it to support more if required.
 Flashing
 --------
 
+From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+
+Example: `make rev2-serial-avrdude`
+
 If you define `EE_HANDS` in your `config.h`, you will need to set the
 EEPROM for the left and right halves. The EEPROM is used to store whether the
 half is left handed or right handed. This makes it so that the same firmware

keyboards/lets_split/rules.mk

@@ -73,3 +73,13 @@ USE_I2C ?= yes
 SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
 
 CUSTOM_MATRIX = yes
+
+avrdude: build
+	ls /dev/tty* > /tmp/1; \
+	echo "Reset your Pro Micro then hit any key to continue..."; \
+	read -n 1 -s; \
+	ls /dev/tty* > /tmp/2; \
+	USB=`diff /tmp/1 /tmp/2 | grep '>' | sed -e 's/> //'`; \
+	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+.PHONY: avrdude

keyboards/planck/keymaps/callum/keymap.c

@@ -12,8 +12,6 @@ extern keymap_config_t keymap_config;
 #define _SYMB 2
 #define _MOUSE 3
 #define _FUNC 4
-#define CMDLEFT LGUI(KC_LEFT)
-#define CMDRGHT LGUI(KC_RGHT)
 #define ENDASH LALT(KC_MINS)
 #define POUND LALT(KC_3)
 
@@ -50,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* MOVE
  * ,-----------------------------------------------------------------------------------.
- * |  Esc |      | Cmd-L|  Up  | Cmd-R|      |      | Cmd-L|  Up  | Cmd-R|      |  Esc |
+ * |  Esc |      | Home |  Up  |  End |      |      | Home |  Up  |  End |      |  Esc |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |  Del | Caps | Left | Down | Right|      |      | Left | Down | Right| Caps |  Del |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -60,7 +58,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_MOVE] = {
-  {KC_ESC,  XXXXXXX, CMDLEFT, KC_UP,   CMDRGHT, XXXXXXX, XXXXXXX, CMDLEFT, KC_UP,   CMDRGHT, XXXXXXX, KC_ESC },
+  {KC_ESC,  XXXXXXX, KC_HOME, KC_UP,   KC_END,  XXXXXXX, XXXXXXX, KC_HOME, KC_UP,   KC_END,  XXXXXXX, KC_ESC },
   {KC_DEL,  KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL },
   {_______, XXXXXXX, XXXXXXX, KC_PGUP, KC_PGDN, XXXXXXX, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}

keyboards/planck/keymaps/callum/readme.md

@@ -23,7 +23,7 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c
 
 /* MOVE
  * ,-----------------------------------------------------------------------------------.
- * |  Esc |      | Cmd-L|  Up  | Cmd-R|      |      | Cmd-L|  Up  | Cmd-R|      |  Esc |
+ * |  Esc |      | Home |  Up  |  End |      |      | Home |  Up  |  End |      |  Esc |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |  Del | Caps | Left | Down | Right|      |      | Left | Down | Right| Caps |  Del |
  * |------+------+------+------+------+------+------+------+------+------+------+------|

keyboards/planck/keymaps/espynn/Makefile

@@ -0,0 +1,63 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Build Options
+#   change to "no" to disable the options, or define them in the makefile.mk in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/planck/keymaps/espynn/keymap.c

@@ -0,0 +1,151 @@
+#include "planck.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef BACKLIGHT_ENABLE
+  #include "backlight.h"
+#endif
+#define PREVENT_STUCK_MODIFIERS
+extern keymap_config_t keymap_config;
+
+// Symbolic names for macro IDs.
+#define _QWERTY  0  // QUERTY layer
+#define _LOWER   1  // Lower layer
+#define _RAISE   2  // Raise layer
+#define _CUSTOM  3  // Custom layer (LOWER + RAISE)
+#define _BL      4  // Backlight
+#define _CUS0    5  // Mobile#
+#define _CUS1    6  // signature
+#define _CUS2    7  // macro 2
+#define _CUS3    8  // macro 3
+#define _CUS4    9  // macro 4
+#define _CUS5    10 // email
+#define _COPY    11 // copy
+#define _PASTE   12 // paste
+#define _CUT     13 // cut
+
+// Macro shortcuts.
+#define QWERTY  M(_LOWER)
+#define LOWER   M(_LOWER)
+#define RAISE   M(_RAISE)
+#define CUSTOM  M(_CUSTOM)
+#define BL      M(_BL)
+#define CUS0    M(_CUS0)
+#define CUS1    M(_CUS1)
+#define CUS2    M(_CUS2)
+#define CUS3    M(_CUS3)
+#define CUS4    M(_CUS4)
+#define CUS5    M(_CUS5)
+#define COPY    M(_COPY)
+#define PASTE   M(_PASTE)
+#define CUT     M(_CUT)
+
+// Func macro definitions.
+#define LWR_PGDN FUNC(0) // Tap for PgDn, hold for LOWER
+#define RSE_PGUP FUNC(1) // Tap for PgUp, hold for RAISE
+#define CTL_CAPS FUNC(2) // Tap for Caps, hold for Ctrl (DOESN'T SEEM TO WORK)
+#define SFT_ENT  FUNC(3) // Tap for Enter, hold for Shift
+#define ZM_NRM   FUNC(4) // Zoom normal
+#define ZM_IN    FUNC(5) // Zoom out
+#define ZM_OUT   FUNC(6) // Zoom in
+
+// Enable these functions using FUNC(n) macro.
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_PGDN),
+    [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_PGUP),
+    [2] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_CAPS),
+    [3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+    [4] = ACTION_MODS_KEY(MOD_LCTL, KC_0),
+    [5] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS),
+    [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PLUS),
+    [7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS),
+ };
+
+// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_QWERTY] = { /* QWERTY */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+    {KC_DEL,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT},
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT},
+    {KC_LCTL, KC_ESC,  KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+[_LOWER] = { /* LOWER */
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+    {KC_TRNS, ZM_NRM,  ZM_IN,   ZM_OUT,  KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+},
+[_RAISE] = { /* RAISE */
+    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV,  KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[_CUSTOM] = { /* CUSTOM */
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS4,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0,    CUS3,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, CUT,     COPY,    PASTE,   CUS1,    CUS5,    CUS2,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+    {BL,      RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+}
+};
+
+// Set a layer persistantly.
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+// Macro actions for each corresponding ID.
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    switch(id) {
+    case _RAISE: // Raised layer.
+	if (record->event.pressed) {
+	    layer_on(_RAISE);
+	    update_tri_layer(_LOWER, _RAISE, _CUSTOM);
+	} else {
+	    layer_off(_RAISE);
+	    update_tri_layer(_LOWER, _RAISE, _CUSTOM);
+	}
+	break;
+    case _LOWER: // Lowered layer.
+	if (record->event.pressed) {
+	    layer_on(_LOWER);
+	    update_tri_layer(_LOWER, _RAISE, _CUSTOM);
+	} else {
+	    layer_off(_LOWER);
+	    update_tri_layer(_LOWER, _RAISE, _CUSTOM);
+	}
+	break;
+    case _BL: // Backlight
+	if (record->event.pressed) {
+	    register_code(KC_RSFT);
+#ifdef BACKLIGHT_ENABLE
+	    backlight_step();
+#endif
+	} else {
+	    unregister_code(KC_RSFT);
+	}
+	break;
+    case _CUS0: // enter your mobile# here
+	    return MACRODOWN(T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(9),END);
+    case _CUS1: // signature line for email
+	    return MACRODOWN(T(ENT), T(ENT), T(MINS), T(J), T(W), END);
+    case _CUS2: // Custom macro 2
+	    return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_L), UP(KC_LSFT), END );
+    case _CUS3: // custom macro 3
+	    return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_F), UP(KC_LSFT), END );
+    case _CUS4: // custom macro 4
+	    return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_I), UP(KC_LSFT), END );
+    case _CUS5: // Enter your email here
+	    return MACRODOWN( TYPE(KC_F),
+        DOWN(KC_LSFT), TYPE(KC_2), UP(KC_LSFT), 
+        TYPE(KC_G), TYPE(KC_M), TYPE(KC_A), TYPE(KC_I), TYPE(KC_L), TYPE(KC_DOT), TYPE(KC_C), TYPE(KC_O), TYPE(KC_M), END );
+    case _CUT: //cut macro
+	    return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_X), UP(KC_LCTL), END );
+    case _COPY: // copy macro
+	    return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_C), UP(KC_LCTL), END );
+    case _PASTE: // paste macro
+	    return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_V), UP(KC_LCTL), END ); 
+    };
+    return MACRO_NONE;
+}

keyboards/planck/keymaps/espynn/layout.json

@@ -0,0 +1,271 @@
+[
+  {
+    "backcolor": "#858585",
+    "name": "Planck 40%",
+    "author": "James Folkert",
+    "background": {
+      "name": "Aluminium brushed",
+      "style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');"
+    },
+    "switchMount": "cherry",
+    "switchBrand": "cherry",
+    "switchType": "MX1A-A1xx",
+    "pcb": true,
+    "plate": true
+  },
+  [
+    {
+      "fa": [
+        2,
+        2,
+        0,
+        2
+      ]
+    },
+    "F1\n1\n\n!\n\n\n\n\n\n<i class='kb kb-Tab-2'></i>",
+    "F2\n2\n\n@\n\n\n\n\n\nQ",
+    "F3\n3\n\n#\n\n\n\n\n\nW",
+    "F4\n4\n\n$\n\n\n\n\n\nE",
+    "F5\n5\n\n%\n\n\n\n\n\nR",
+    "F6\n6\n\n^\n\n\n\n\n\nT",
+    "F7\n6\n\n&\n\n\n\n\n\nY",
+    "F8\n8\n\n*\nMacro4\n\n\n\n\nU",
+    "F9\n9\n\n(\n\n\n\n\n\nI",
+    {
+      "fa": [
+        0,
+        0,
+        0,
+        2
+      ]
+    },
+    "F10\n0\n\n)\n\n\n\n\n\nO",
+    {
+      "fa": [
+        2,
+        2,
+        0,
+        2
+      ]
+    },
+    "F11\n-\n\n_\n\n\n\n\n\nP",
+    "F12\n=\n\n+\n\n\n\n\n\n<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>"
+  ],
+  [
+    {
+      "a": 7,
+      "f": 3
+    },
+    "<i class='mss mss-Unicode-DeleteRight-Big-2'></i>",
+    {
+      "f": 3
+    },
+    "A",
+    {
+      "f": 3
+    },
+    "S",
+    {
+      "f": 3
+    },
+    "D",
+    {
+      "t": "#ff0000",
+      "a": 4,
+      "f": 3
+    },
+    "\n(\n\n\n\n\n\n\n\nF",
+    {
+      "t": "#000000",
+      "f": 3
+    },
+    "\n)\n\n\n\n\n\n\n\nG",
+    {
+      "f": 3
+    },
+    "\n{\n\n\nMacro0\n\n\n\n\nH",
+    {
+      "t": "#ff0000",
+      "f": 3
+    },
+    "\n}\n\n\nMacro3\n\n\n\n\nJ",
+    {
+      "t": "#000000",
+      "f": 3
+    },
+    "{\n\n\n\n\n\n\n\n\nK",
+    {
+      "f": 3
+    },
+    "{\n\n\n\n\n\n\n\n\nL",
+    {
+      "fa": [
+        2,
+        2,
+        2,
+        2,
+        0,
+        0,
+        0,
+        2
+      ]
+    },
+    "\\\n\n|\n\n\n\n\n:\n\n;",
+    {
+      "a": 7,
+      "fa": [
+        9
+      ]
+    },
+    "<i class='mss mss-Unicode-Enter-3'></i>"
+  ],
+  [
+    {
+      "f": 3
+    },
+    "Shift",
+    {
+      "f": 3
+    },
+    "Z",
+    {
+      "f": 3
+    },
+    "X\n\n\n\nCut",
+    {
+      "f": 3
+    },
+    "C\n\n\n\nCopy",
+    {
+      "a": 4,
+      "fa": [
+        2,
+        2,
+        2,
+        2
+      ]
+    },
+    "\\\n[\n|\n{\nPaste\n\n\n\n\nV",
+    "|\n]\n\n}\nMacro1\n\n\n\n\nB",
+    "`\n'\n~\n\"\nMacro5\n\n\n\n\nN",
+    "~\n\"\n\n\nMacro2\n\n\n\n\nM",
+    {
+      "fa": [
+        2,
+        2,
+        2,
+        2,
+        0,
+        0,
+        0,
+        1
+      ]
+    },
+    "[\n\n{\n\n\n\n\n<\n\n,",
+    "[\n\n{\n\n\n\n\n\n\n.",
+    {
+      "a": 6
+    },
+    "\n\n?\n\n\n\n\n\n/",
+    {
+      "a": 4,
+      "fa": [
+        2,
+        2,
+        2,
+        0,
+        0,
+        0,
+        0,
+        1,
+        9,
+        0
+      ]
+    },
+    "\n\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift\n\n\n\n\n<i class='mss mss-Unicode-Enter-3'></i>\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift"
+  ],
+  [
+    {
+      "a": 7,
+      "f": 3
+    },
+    "Ctrl\n\n\n\nBLight",
+    {
+      "a": 4,
+      "fa": [
+        2,
+        1,
+        2,
+        0,
+        0,
+        0,
+        0,
+        1,
+        9,
+        9
+      ]
+    },
+    "\nZNorm\n\n\nRESET\n\n\n\n\n<i class='mss mss-Unicode-Escape-3'></i>",
+    {
+      "fa": [
+        2,
+        1,
+        2,
+        0,
+        0,
+        0,
+        0,
+        1,
+        9,
+        6
+      ]
+    },
+    "\nZIn\n\n\n\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>",
+    {
+      "fa": [
+        2,
+        1,
+        2,
+        0,
+        0,
+        0,
+        0,
+        1,
+        9,
+        9
+      ]
+    },
+    "\nZOut\n\n\n\n\n\n\n\n<i class='kb kb-Unicode-Alternate-1'></i>",
+    {
+      "a": 7,
+      "fa": [
+        9
+      ]
+    },
+    "&dArr;",
+    {
+      "a": 4,
+      "fa": [
+        9,
+        5,
+        5
+      ],
+      "w": 2
+    },
+    "\n<i class='kb kb-Unicode-Page-Down-3'></i>\n<i class='kb kb-Unicode-Page-Up-3'></i>",
+    {
+      "a": 7
+    },
+    "&uArr;",
+    {
+      "a": 4,
+      "fa": [
+        2
+      ]
+    },
+    "<i class='kb kb-Multimedia-FastForward-End'></i>\n\n\n\n\n\n\n\n\n&larr;",
+    "<i class='kb kb-Multimedia-Volume-Down-1'></i>\n\n\n\n\n\n\n\n\n&darr;",
+    "<i class='kb kb-Multimedia-Volume-Up-1'></i>\n\n\n\n\n\n\n\n\n&uarr;",
+    "<i class='kb kb-Multimedia-Play-Pause'></i>\n\n\n\n\n\n\n\n\n&rarr;"
+  ]
+]

keyboards/planck/keymaps/espynn/readme.md

@@ -0,0 +1,18 @@
+# Espynn's keymap for Planck Ortholinear 40% Mechanical Keyboard
+Created by James Folkert: https://twitter.com/trekloFsemaJ
+Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c
+ 
+
+![Layout](keyboard-layout.png "Practical Keymap")
+
+
+* Online keyboard layout editor: http://www.keyboard-layout-editor.com/
+* [JSON of raw layout] (layout.json "JSON of raw layout")
+
+# Notes
+* Simultaneous RAISE+LOWER enters CUSTOM layer. Several custom keymaps are here
+* I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4
+* add your mobile and email to the keymap before make
+* RAISE and LOWER also acts as PgUp and PgDn when tapped.
+* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works)
+* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.

keyboards/planck/keymaps/smt/Makefile

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/planck/keymaps/smt/keymap.c

@@ -0,0 +1,229 @@
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _DVORAK 0
+#define _QWERTY 1
+#define _LOWER 2
+#define _RAISE 3
+#define _ADJUST 16
+
+enum planck_keycodes {
+  DVORAK = SAFE_RANGE,
+  QWERTY,
+  LOWER,
+  RAISE,
+  BACKLIT
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  -   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_TAB,        KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,       KC_BSPC},
+  {KC_ESC,        KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,       KC_MINS},
+  {SFT_T(KC_ESC), KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z, SFT_T(KC_ENT)},
+  {ALL_T(KC_GRV), KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,      KC_RGHT}
+},
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {_______, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {_______, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {_______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   4  |   5  |   6  | Home |PageUp|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   1  |   2  |   3  | End  |PageDn|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL},
+  {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_4,    KC_5,    KC_6,    KC_HOME, KC_PGUP},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_1,    KC_2,    KC_3,    KC_END,  KC_PGDN},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |   _  |   ?  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |   -  |   /  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+  {_______, _______, _______, _______, _______, _______, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, _______, _______, _______, _______, _______, KC_MINS, KC_SLSH, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Dvorak|Qwerty|      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, DVORAK,  QWERTY,  _______, _______, _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif

keyboards/planck/keymaps/smt/readme.md

@@ -0,0 +1,103 @@
+# smt's Planck keymap
+
+This keymap is primarily based on the default Planck keymap.
+
+Notable differences from the default are:
+
+1. **Dvorak by default**
+
+    I happen to type in Dvorak, and prefer that layer to be the default on my keyboard. This is easy enough to switch around with Qwerty, Colemak, or whatever.
+
+2. **Right Shift**
+
+    I use both the left and right shift keys when I type. When I want to modify a key with shift, I hold shift with the hand opposite the one typing the key. In the default keymap, Enter is where shift would be on a standard keyboard layout. Oh, muscle memory.
+
+    Thankfully, QMK supports [mod-tap](https://github.com/jackhumbert/qmk_firmware/wiki#fun-with-modifier-keys) keys, and this allows me to set the Enter key to send a modifier (MOD_LSFT) when held, and KC_ENT when tapped. Awesome!
+
+3. Escape
+
+    I am experimenting with using Left Shift as a mod-tap key for Escape, similar to how I use the Enter key. It's set up like this on my Minivan, so in the interest of consistency...
+
+4. Backtick
+
+    I don't currently have LEDs on any of my keyboards, and even if I did, I don't think I would want their controls on a base layer.
+
+    So, why use backtick in the lower left corner? I use it as my tmux prefix key, so I need to type it more frequently than most people. Putting it on the base layer works well for me.
+
+## Dvorak (default)
+
+```
+,-----------------------------------------------------------------------------------.
+| Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  -   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+| Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|   `  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+`-----------------------------------------------------------------------------------'
+```
+
+## Qwerty (same as default)
+
+```
+,-----------------------------------------------------------------------------------.
+| Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|   `  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+`-----------------------------------------------------------------------------------'
+```
+
+## Lower
+
+This is where I put the number row, a numpad cluster, function keys, and some light navigation via Home/End/PageUp/PageDn. Like the "Raise" layer, the top row is redundant to help with Planck compatibility.
+
+```
+,-----------------------------------------------------------------------------------.
+|   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   4  |   5  |   6  | Home |PageUp|
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   1  |   2  |   3  | End  |PageDn|
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+`-----------------------------------------------------------------------------------'
+```
+
+## Raise
+
+As a developer, it makes the most sense for me to group all the commonly-used symbols that don't fit on the main layer. In particular, having the dual-column of parens-braces-brackets really helps a lot.
+
+I haven't completely filled this layer, which leaves room for future mappings and macros.
+
+```
+,-----------------------------------------------------------------------------------.
+|   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      |      |      |      |      |      |   _  |   ?  |   +  |   {  |   }  |  |   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |      |      |      |      |      |   -  |   /  |   =  |   [  |   ]  |  \   |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+`-----------------------------------------------------------------------------------'
+```
+
+## Adjust (Lower + Raise)
+
+Utility layer. This is where I'd switch to Qwerty, or ~~fool around with~~ adjust the audio/music settings.
+
+```
+,-----------------------------------------------------------------------------------.
+|      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      |      |      |Aud on|AudOff|AGnorm|AGswap|Dvorak|Qwerty|      |      |      |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      |      |      |      |      |
+`-----------------------------------------------------------------------------------'
+```

keyboards/planck/keymaps/yale/Makefile

@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/planck/keymaps/yale/config.h

@@ -0,0 +1,11 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define PREVENT_STUCK_MODIFIERS
+
+#endif
+
+
+

keyboards/planck/keymaps/yale/keymap.c

@@ -0,0 +1,108 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+//
+
+#include "planck.h"
+#ifdef BACKLIGHT_ENABLE
+	#include "backlight.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _NUM 5
+#define _FUNC 6
+#define _NAV 7
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* _QWERTY
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |Ctrl/Tab| A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Alt  | GUI  | GUI  |  Num |    Space    |  FN  |  GUI |  Alt | Ctrl | Enter|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+	{KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_BSPC},
+	{CTL_T(KC_TAB),	KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,	KC_QUOT},
+	{KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT},
+	{KC_LCTL,		KC_LALT,	KC_LGUI,	KC_LGUI,	MO(_NUM),	KC_SPC,		KC_SPC,		MO(_FUNC),	KC_RGUI,	KC_RALT,	KC_RCTL,	KC_ENT}
+},
+
+/* _NUM
+ * ,-----------------------------------------------------------------------------------.
+ * |  ___ |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | ____ |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Ctrl |   `  |  [   |  {   |  (   |  /   |  \   |   )  |   }  |   ]  |   -  |  =   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | ____ |   !  |  @   |  #   |  $   |  %   |  ^   |  &   |  *   |   _  |   +  | ____ |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | ____ | ___  | ___  | ___  | XXXX |    ______   | ____ | ____ | ____ |  __  | ____ |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_NUM] = {
+	{_______,	KC_1,		KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		_______},
+	{KC_LCTL,	KC_GRV,		KC_LBRC,	KC_LCBR,	KC_LPRN,	KC_SLSH,	KC_BSLS,	KC_RPRN,	KC_RCBR,	KC_RBRC,	KC_MINS,	KC_EQL},
+	{_______,	KC_EXLM,	KC_AT,		KC_HASH,	KC_DLR,		KC_PERC,	KC_CIRC,	KC_AMPR,	KC_ASTR,	KC_UNDS,	KC_PLUS,	_______},
+	{_______,	_______,	_______,	_______,	_______,	_______,	_______,	MO(_NAV),	_______,	_______,	_______,	_______}
+},
+
+/* _FUNC
+ * ,-----------------------------------------------------------------------------------.
+ * | ____ |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | ____ |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | ____ |Shift | Ctrl |  Alt |  GUI | ____ | Left | Down |  Up  |Right | Del  | ____ |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | ____ |Light | ____ | Vol- | Prev | Play | Mute | Next | Vol+ | ____ | ____ | ____ |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | ____ | ____ | ____ | ____ | ____ |    _____    | XXXX | ____ | ____ | ____ | ____ |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNC] = {
+	{_______,	KC_1,		KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		_______},
+	{_______,	KC_LSFT,	KC_LCTL,	KC_LALT,	KC_LGUI,	_______,	KC_LEFT,	KC_DOWN,	KC_UP,		KC_RGHT,	KC_DEL,		_______},
+	{_______,	M(0),		_______,	KC_VOLD,	KC_MPRV,	KC_MPLY,	KC_MUTE,	KC_MNXT,	KC_VOLU,	_______,	_______,	_______},
+	{_______,	_______,	_______,	_______,	MO(_NAV),	_______,	_______,	_______,	_______,	_______,	_______,	_______}
+},
+
+[_NAV] = {
+	{KC_MS_ACCEL2,	KC_FN1,		KC_FN2,		KC_FN3,		KC_FN4,		XXXXXXX,	XXXXXXX,		KC_WH_D,		KC_WH_U,	XXXXXXX,		XXXXXXX,	XXXXXXX},
+	{KC_MS_ACCEL1,	KC_MS_BTN4,	KC_MS_BTN3,	KC_MS_BTN2,	KC_MS_BTN1,	XXXXXXX,	KC_MS_LEFT,		KC_MS_DOWN,		KC_MS_UP,	KC_MS_RIGHT,	XXXXXXX,	XXXXXXX},
+	{KC_MS_ACCEL0,	KC_FN9,		KC_FN10,	KC_FN11,	KC_FN12,	XXXXXXX,	XXXXXXX,		XXXXXXX,		XXXXXXX,	XXXXXXX,		XXXXXXX,	XXXXXXX},
+	{XXXXXXX,		XXXXXXX,	XXXXXXX,	XXXXXXX,	XXXXXXX,	XXXXXXX,	XXXXXXX,		XXXXXXX,		XXXXXXX,	XXXXXXX,		XXXXXXX,	XXXXXXX}
+},
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+	// MACRODOWN only works in this function
+			switch(id) {
+				case 0:
+					if (record->event.pressed) {
+						register_code(KC_RSFT);
+						#ifdef BACKLIGHT_ENABLE
+							backlight_step();
+						#endif
+					} else {
+						unregister_code(KC_RSFT);
+					}
+				break;
+			}
+		return MACRO_NONE;
+};

keyboards/preonic/keymaps/smt/keymap.c

@@ -1,9 +1,9 @@
 #include "preonic.h"
 #include "action_layer.h"
-#include "eeconfig.h"
 #ifdef AUDIO_ENABLE
   #include "audio.h"
 #endif
+#include "eeconfig.h"
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -33,39 +33,39 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |  /   |
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  -   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * |   `  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
 [_DVORAK] = {
-  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,       KC_BSPC},
-  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,       KC_SLSH},
-  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,       KC_MINS},
-  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z, SFT_T(KC_ENT)},
-  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,      KC_RGHT}
+  {KC_GRV,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,       KC_BSPC},
+  {KC_TAB,        KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,       KC_BSPC},
+  {KC_ESC,        KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,       KC_MINS},
+  {SFT_T(KC_ESC), KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z, SFT_T(KC_ENT)},
+  {ALL_T(KC_GRV), KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,      KC_RGHT}
 },
 
 /* Qwerty
  * ,-----------------------------------------------------------------------------------.
  * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * |   `  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
 [_QWERTY] = {
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  {_______, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL},
+  {_______, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    _______},
   {_______, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
   {_______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
@@ -98,9 +98,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |   _  |   +  |   {  |   }  |  |   |
+ * |      |      |      |      |      |      |   _  |   ?  |   +  |   {  |   }  |  |   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |   -  |   =  |   [  |   ]  |  \   |
+ * |      |      |      |      |      |      |   -  |   /  |   =  |   [  |   ]  |  \   |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
@@ -108,8 +108,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_RAISE] = {
   {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
   {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
-  {_______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
-  {_______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {_______, _______, _______, _______, _______, _______, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, _______, _______, _______, _______, _______, KC_MINS, KC_SLSH, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
   {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
 },
 

keyboards/preonic/keymaps/smt/readme.md

@@ -12,7 +12,17 @@ Notable differences from the default are:
 
     I use both the left and right shift keys when I type. When I want to modify a key with shift, I hold shift with the hand opposite the one typing the key. In the default keymap, Enter is where shift would be on a standard keyboard layout. Oh, muscle memory.
 
-    Thankfully, QMK supports [mod-tap](https://github.com/qmk/qmk_firmware/wiki#fun-with-modifier-keys) keys, and this allows me to set the Enter key to send a modifier (MOD_LSFT) when held, and KC_ENT when tapped. Awesome!
+    Thankfully, QMK supports [mod-tap](https://github.com/jackhumbert/qmk_firmware/wiki#fun-with-modifier-keys) keys, and this allows me to set the Enter key to send a modifier (MOD_LSFT) when held, and KC_ENT when tapped. Awesome!
+
+3. Escape
+
+    I am experimenting with using Left Shift as a mod-tap key for Escape, similar to how I use the Enter key. It's set up like this on my Minivan, so in the interest of consistency...
+
+4. Backtick
+
+    I don't currently have LEDs on any of my keyboards, and even if I did, I don't think I would want their controls on a base layer.
+
+    So, why use backtick in the lower left corner? I use it as my tmux prefix key, so I need to type it more frequently than most people. Putting it on the base layer works well for me.
 
 ## Dvorak (default)
 
@@ -20,13 +30,13 @@ Notable differences from the default are:
 ,-----------------------------------------------------------------------------------.
 |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
 |------+------+------+------+------+------+------+------+------+------+------+------|
-| Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |  /   |
+| Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
 |------+------+------+------+------+-------------+------+------+------+------+------|
 | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  -   |
 |------+------+------+------+------+------|------+------+------+------+------+------|
 | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
 |------+------+------+------+------+------+------+------+------+------+------+------|
-| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+|   `  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
 `-----------------------------------------------------------------------------------'
 ```
 
@@ -36,13 +46,13 @@ Notable differences from the default are:
 ,-----------------------------------------------------------------------------------.
 |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
 |------+------+------+------+------+------+------+------+------+------+------+------|
-| Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+| Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
 |------+------+------+------+------+-------------+------+------+------+------+------|
 | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
 |------+------+------+------+------+------|------+------+------+------+------+------|
 | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
 |------+------+------+------+------+------+------+------+------+------+------+------|
-| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+|   `  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
 `-----------------------------------------------------------------------------------'
 ```
 
@@ -76,10 +86,28 @@ I haven't completely filled this layer, which leaves room for future mappings an
 |------+------+------+------+------+-------------+------+------+------+------+------|
 |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
 |------+------+------+------+------+-------------+------+------+------+------+------|
-|      |      |      |      |      |      |      |   _  |   +  |   {  |   }  |  |   |
+|      |      |      |      |      |      |   _  |   ?  |   +  |   {  |   }  |  |   |
 |------+------+------+------+------+------|------+------+------+------+------+------|
-|      |      |      |      |      |      |      |   -  |   =  |   [  |   ]  |  \   |
+|      |      |      |      |      |      |   -  |   /  |   =  |   [  |   ]  |  \   |
 |------+------+------+------+------+------+------+------+------+------+------+------|
 |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
 `-----------------------------------------------------------------------------------'
 ```
+
+## Adjust (Lower + Raise)
+
+Utility layer. This is where I'd switch to Qwerty, or ~~fool around with~~ adjust the audio/music settings.
+
+```
+,-----------------------------------------------------------------------------------.
+|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      |      |      |Aud on|AudOff|AGnorm|AGswap|Dvorak|Qwerty|      |      |      |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      |      |      |      |      |
+`-----------------------------------------------------------------------------------'
+```

quantum/process_keycode/process_combo.c

@@ -0,0 +1,134 @@
+#include "process_combo.h"
+#include "print.h"
+
+
+#define COMBO_TIMER_ELAPSED -1
+
+
+__attribute__ ((weak))
+combo_t key_combos[] = {
+
+};
+
+__attribute__ ((weak))
+void process_combo_event(uint8_t combo_index, bool pressed) {
+
+}
+
+static uint8_t current_combo_index = 0;
+
+static inline void send_combo(uint16_t action, bool pressed)
+{
+    if (action) {
+        if (pressed) {
+            register_code16(action);
+        } else {
+            unregister_code16(action);
+        }
+    } else {
+        process_combo_event(current_combo_index, pressed);
+    }
+}
+
+#define ALL_COMBO_KEYS_ARE_DOWN     (((1<<count)-1) == combo->state)
+#define NO_COMBO_KEYS_ARE_DOWN      (0 == combo->state)
+#define KEY_STATE_DOWN(key)         do{ combo->state |= (1<<key); } while(0)
+#define KEY_STATE_UP(key)           do{ combo->state &= ~(1<<key); } while(0)
+static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t *record) 
+{
+    uint8_t count = 0;
+    uint8_t index = -1;
+    /* Find index of keycode and number of combo keys */
+    for (const uint16_t *keys = combo->keys; ;++count) {
+        uint16_t key = pgm_read_word(&keys[count]);
+        if (keycode == key) index = count;
+        if (COMBO_END == key) break;
+    }
+
+    /* Return if not a combo key */
+    if (-1 == (int8_t)index) return false;
+
+    /* The combos timer is used to signal whether the combo is active */
+    bool is_combo_active = COMBO_TIMER_ELAPSED == combo->timer ? false : true;
+
+    if (record->event.pressed) {
+        KEY_STATE_DOWN(index);
+
+        if (is_combo_active) {
+            if (ALL_COMBO_KEYS_ARE_DOWN) { /* Combo was pressed */
+                send_combo(combo->keycode, true);
+                combo->timer = COMBO_TIMER_ELAPSED;
+            } else { /* Combo key was pressed */
+                combo->timer = timer_read();
+#ifdef COMBO_ALLOW_ACTION_KEYS
+                combo->prev_record = *record;
+#else
+                combo->prev_key = keycode;
+#endif
+            }
+        }
+    } else {
+        if (ALL_COMBO_KEYS_ARE_DOWN) { /* Combo was released */
+            send_combo(combo->keycode, false);
+        }
+
+        if (is_combo_active) { /* Combo key was tapped */
+#ifdef COMBO_ALLOW_ACTION_KEYS
+            record->event.pressed = true;
+            process_action(record, store_or_get_action(record->event.pressed, record->event.key));
+            record->event.pressed = false;
+            process_action(record, store_or_get_action(record->event.pressed, record->event.key));
+#else
+            register_code16(keycode);
+            send_keyboard_report();
+            unregister_code16(keycode);
+#endif
+            combo->timer = 0;            
+        }
+
+        KEY_STATE_UP(index);        
+    }
+
+    if (NO_COMBO_KEYS_ARE_DOWN) {
+        combo->timer = 0;
+    }
+
+    return is_combo_active;
+}
+
+bool process_combo(uint16_t keycode, keyrecord_t *record)
+{
+    bool is_combo_key = false;
+
+    for (current_combo_index = 0; current_combo_index < COMBO_COUNT; ++current_combo_index) {
+        combo_t *combo = &key_combos[current_combo_index];
+        is_combo_key |= process_single_combo(combo, keycode, record);
+    }    
+
+    return !is_combo_key;
+}
+
+void matrix_scan_combo(void)
+{
+    for (int i = 0; i < COMBO_COUNT; ++i) {
+        combo_t *combo = &key_combos[i];
+        if (combo->timer && 
+            combo->timer != COMBO_TIMER_ELAPSED && 
+            timer_elapsed(combo->timer) > COMBO_TERM) {
+            
+            /* This disables the combo, meaning key events for this
+             * combo will be handled by the next processors in the chain 
+             */
+            combo->timer = COMBO_TIMER_ELAPSED;
+
+#ifdef COMBO_ALLOW_ACTION_KEYS
+            process_action(&combo->prev_record, 
+                store_or_get_action(combo->prev_record.event.pressed, 
+                                    combo->prev_record.event.key));
+#else
+            unregister_code16(combo->prev_key);
+            register_code16(combo->prev_key);
+#endif
+        }
+    }
+}

quantum/process_keycode/process_combo.h

@@ -0,0 +1,43 @@
+#ifndef PROCESS_COMBO_H
+#define PROCESS_COMBO_H
+
+#include <stdint.h>
+#include "progmem.h"
+#include "quantum.h"
+
+typedef struct
+{
+    const uint16_t *keys;
+    uint16_t keycode;        
+#ifdef EXTRA_EXTRA_LONG_COMBOS
+    uint32_t state;
+#elif EXTRA_LONG_COMBOS
+    uint16_t state;
+#else
+    uint8_t state;
+#endif
+    uint16_t timer;
+#ifdef COMBO_ALLOW_ACTION_KEYS
+    keyrecord_t prev_record;
+#else
+    uint16_t prev_key;
+#endif
+} combo_t;
+
+
+#define COMBO(ck, ca)       {.keys = &(ck)[0], .keycode = (ca)}
+#define COMBO_ACTION(ck)    {.keys = &(ck)[0]}
+
+#define COMBO_END 0
+#ifndef COMBO_COUNT
+#define COMBO_COUNT 0
+#endif
+#ifndef COMBO_TERM
+#define COMBO_TERM TAPPING_TERM
+#endif
+
+bool process_combo(uint16_t keycode, keyrecord_t *record);
+void matrix_scan_combo(void);
+void process_combo_event(uint8_t combo_index, bool pressed);
+
+#endif

quantum/process_keycode/process_unicode.c

@@ -141,7 +141,16 @@ bool process_unicode_map(uint16_t keycode, keyrecord_t *record) {
     const uint32_t* map = unicode_map;
     uint16_t index = keycode & 0x7FF;
     uint32_t code = pgm_read_dword_far(&map[index]);
-    if ((code > 0xFFFF && input_mode == UC_OSX) || (code > 0xFFFFF && input_mode == UC_LNX)) {
+    if (code > 0xFFFF && code <= 0x10ffff && input_mode == UC_OSX) {
+      // Convert to UTF-16 surrogate pair
+      code -= 0x10000;
+      uint32_t lo = code & 0x3ff;
+      uint32_t hi = (code & 0xffc00) >> 10;
+      unicode_input_start();
+      register_hex32(hi + 0xd800);
+      register_hex32(lo + 0xdc00);
+      unicode_input_finish();
+    } else if ((code > 0x10ffff && input_mode == UC_OSX) || (code > 0xFFFFF && input_mode == UC_LNX)) {
       // when character is out of range supported by the OS
       unicode_map_input_error();
     } else {

quantum/quantum.c

@@ -33,14 +33,42 @@ static void do_code16 (uint16_t code, void (*f) (uint8_t)) {
     f(KC_RGUI);
 }
 
+static inline void qk_register_weak_mods(uint8_t kc) {
+    add_weak_mods(MOD_BIT(kc));
+    send_keyboard_report();
+}
+
+static inline void qk_unregister_weak_mods(uint8_t kc) {
+    del_weak_mods(MOD_BIT(kc));
+    send_keyboard_report();
+}
+
+static inline void qk_register_mods(uint8_t kc) {
+    add_weak_mods(MOD_BIT(kc));
+    send_keyboard_report();
+}
+
+static inline void qk_unregister_mods(uint8_t kc) {
+    del_weak_mods(MOD_BIT(kc));
+    send_keyboard_report();
+}
+
 void register_code16 (uint16_t code) {
-  do_code16 (code, register_code);
+  if (IS_MOD(code) || code == KC_NO) {
+      do_code16 (code, qk_register_mods);
+  } else {
+      do_code16 (code, qk_register_weak_mods);
+  }
   register_code (code);
 }
 
 void unregister_code16 (uint16_t code) {
   unregister_code (code);
-  do_code16 (code, unregister_code);
+  if (IS_MOD(code) || code == KC_NO) {
+      do_code16 (code, qk_unregister_mods);
+  } else {
+      do_code16 (code, qk_unregister_weak_mods);
+  }
 }
 
 __attribute__ ((weak))
@@ -130,6 +158,9 @@ bool process_record_quantum(keyrecord_t *record) {
   #ifndef DISABLE_CHORDING
     process_chording(keycode, record) &&
   #endif
+  #ifdef COMBO_ENABLE
+    process_combo(keycode, record) &&
+  #endif
   #ifdef UNICODE_ENABLE
     process_unicode(keycode, record) &&
   #endif
@@ -508,6 +539,11 @@ void matrix_scan_quantum() {
   #ifdef TAP_DANCE_ENABLE
     matrix_scan_tap_dance();
   #endif
+
+  #ifdef COMBO_ENABLE
+    matrix_scan_combo();
+  #endif
+
   matrix_scan_kb();
 }
 

quantum/quantum.h

@@ -63,6 +63,10 @@ extern uint32_t default_layer_state;
 	#include "process_printer.h"
 #endif
 
+#ifdef COMBO_ENABLE
+	#include "process_combo.h"
+#endif
+
 #define SEND_STRING(str) send_string(PSTR(str))
 void send_string(const char *str);
 

quantum/quantum_keycodes.h

@@ -290,6 +290,7 @@ enum quantum_keycodes {
 #define CTL_T(kc) MT(MOD_LCTL, kc)
 #define SFT_T(kc) MT(MOD_LSFT, kc)
 #define ALT_T(kc) MT(MOD_LALT, kc)
+#define ALGR_T(kc) MT(MOD_RALT, kc) // dual-function AltGR
 #define GUI_T(kc) MT(MOD_LGUI, kc)
 #define C_S_T(kc) MT((MOD_LCTL | MOD_LSFT), kc) // Control + Shift e.g. for gnome-terminal
 #define MEH_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT), kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl

tmk_core/common/action.c

@@ -49,6 +49,13 @@ void action_exec(keyevent_t event)
 
     keyrecord_t record = { .event = event };
 
+#if (defined(ONESHOT_TIMEOUT) && (ONESHOT_TIMEOUT > 0))
+    if (has_oneshot_layer_timed_out()) {
+        dprintf("Oneshot layer: timeout\n");
+        clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED);
+    }
+#endif
+
 #ifndef NO_ACTION_TAPPING
     action_tapping_process(record);
 #else
@@ -100,7 +107,7 @@ bool process_record_quantum(keyrecord_t *record) {
     return true;
 }
 
-void process_record(keyrecord_t *record) 
+void process_record(keyrecord_t *record)
 {
     if (IS_NOEVENT(record->event)) { return; }
 
@@ -126,13 +133,6 @@ void process_action(keyrecord_t *record, action_t action)
     uint8_t tap_count = record->tap.count;
 #endif
 
-#if (defined(ONESHOT_TIMEOUT) && (ONESHOT_TIMEOUT > 0))
-    if (has_oneshot_layer_timed_out()) {
-        dprintf("Oneshot layer: timeout\n");
-        clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED);
-    }
-#endif
-
     if (event.pressed) {
         // clear the potential weak mods left by previously pressed keys
         clear_weak_mods();

util/travis_build.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}"
+TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
+
+if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then 
+	NEFM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/)' | wc -l)
+	if [[ $NEFM -gt 0 ]] ; then
+		echo "Making all keymaps for all keyboards"
+		make all-keyboards AUTOGEN="true"
+	else
+		MKB=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards\/)([a-zA-Z_]+)' | sort -u)
+		for KB in $MKB ; do
+			echo "Making all keymaps for $KB"
+			make "$KB" AUTOGEN=true
+		done
+	fi
+fi

util/travis_compiled_push.sh

@@ -7,21 +7,49 @@ rev=$(git rev-parse --short HEAD)
 git config --global user.name "Travis CI"
 git config --global user.email "jack.humb+travis.ci@gmail.com"
 
-make ergodox-ez AUTOGEN=true
+if [[ "$TRAVIS_BRANCH" == "master" ]] ; then
 
-find . -name ".build" | xargs rm -rf
-cd ..
-git clone https://$GH_TOKEN@github.com/jackhumbert/qmk.fm.git
-cd qmk.fm
-git submodule update --init --recursive
-rm -rf keyboard
-rm -rf keyboards
-cp -r ../qmk_firmware/keyboards .
-mkdir keyboards/ergodox_ez/
-cp ../qmk_firmware/util/ergodox_ez.html keyboards/ergodox_ez/index.html
-cp ../qmk_firmware/readme.md qmk_readme.md
-./generate.sh
+increment_version ()
+{
+  declare -a part=( ${1//\./ } )
+  part[2]=$((part[2] + 1))
+  new="${part[*]}"
+  echo -e "${new// /.}"
+} 
 
-git add -A
-git commit -m "generated from qmk_firmware/$TRAVIS_BRANCH@${rev}" 
-git push
+NEFM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/)' | wc -l)
+if [[ $NEFM -gt 0 ]] ; then
+	echo "Essential files modified."
+	git fetch --tags
+	lasttag=$(git tag | grep -Ev '\-' | xargs -I@ git log --format=format:"%ai @%n" -1 @ | sort -V | awk '{print $4}' | tail -1)
+	newtag=$(increment_version $lasttag)
+	git tag $newtag
+	git push --tags -q https://$GH_TOKEN@github.com/qmk/qmk_firmware
+else
+	echo "No essential files modified."
+fi
+
+if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then
+
+	make ergodox-ez AUTOGEN=true
+
+	find . -name ".build" | xargs rm -rf
+	cd ..
+	git clone https://$GH_TOKEN@github.com/jackhumbert/qmk.fm.git
+	cd qmk.fm
+	git submodule update --init --recursive
+	#rm -rf keyboard
+	#rm -rf keyboards
+	yes | cp -rf ../qmk_firmware/keyboards .
+	mkdir keyboards/ergodox_ez/
+	cp ../qmk_firmware/util/ergodox_ez.html keyboards/ergodox_ez/index.html
+	cp ../qmk_firmware/readme.md qmk_readme.md
+	./generate.sh
+
+	git add -A
+	git commit -m "generated from qmk/qmk_firmware@${rev}" 
+	git push
+
+fi
+
+fi