Reset color after submodule warning message

Fixes leaking bold text

.travis.yml

@@ -11,7 +11,7 @@ env:
   global:
   - secure: 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
 before_install:
-  - wget http://www.atmel.com/images/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz || wget http://qmk.fm/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
+  - wget http://ww1.microchip.com/downloads/en/DeviceDoc/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz || wget http://qmk.fm/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
 install:
   - tar -zxf avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
   - export PATH="$PATH:$TRAVIS_BUILD_DIR/avr8-gnu-toolchain-linux_x86_64/bin"
@@ -38,4 +38,4 @@ notifications:
       - https://webhooks.gitter.im/e/afce403d65f143dfac09
     on_success: always  # options: [always|never|change] default: always
     on_failure: always  # options: [always|never|change] default: always
-    on_start: never     # options: [always|never|change] default: always
+    on_start: never     # options: [always|never|change] default: always

docs/config_options.md

@@ -69,7 +69,11 @@ This is a C header file that is one of the first things included, and will persi
 * `#define BACKLIGHT_PIN B7`
   * pin of the backlight - B5, B6, B7 use PWM, others use softPWM
 * `#define BACKLIGHT_LEVELS 3`
-  * number of levels your backlight will have (not including off)
+  * number of levels your backlight will have (maximum 15 excluding off)
+* `#define BACKLIGHT_BREATHING`
+  * enables backlight breathing (only works with backlight pins B5, B6 and B7)
+* `#define BREATHING_PERIOD 6`
+  * the length of one backlight "breath" in seconds
 * `#define DEBOUNCING_DELAY 5`
   * the delay when reading the value of the pin (5 is default)
 * `#define LOCKING_SUPPORT_ENABLE`

docs/faq_keymap.md

@@ -127,7 +127,7 @@ https://github.com/tekezo/Karabiner/issues/403
 
 ## Esc and <code>&#96;</code> on a Single Key
 
-See the [Grave Escape](feature_grave_escape.md) feature.
+See the [Grave Escape](feature_grave_esc.md) feature.
 
 ## Arrow on Right Modifier Keys with Dual-Role
 This turns right modifier keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed **TAP**.

docs/feature_backlight.md

@@ -10,8 +10,30 @@ These keycodes control the backlight. Most keyboards use this for single color i
 |---------|------------------------------------------|
 |`BL_TOGG`|Turn the backlight on or off              |
 |`BL_STEP`|Cycle through backlight levels            |
-|`BL_x`   |Set a specific backlight level between 0-9|
-|`BL_ON`  |An alias for `BL_9`                       |
-|`BL_OFF` |An alias for `BL_0`                       |
-|`BL_INC` |Increase backlight level                  |
-|`BL_DEC` |Decrease backlight level                  |
+|`BL_ON`  |Set the backlight to max brightness       |
+|`BL_OFF` |Turn the backlight off                    |
+|`BL_INC` |Increase the backlight level              |
+|`BL_DEC` |Decrease the backlight level              |
+|`BL_BRTG`|Toggle backlight breathing                |
+
+Note that for backlight breathing, you need to have `#define BACKLIGHT_BREATHING` in your config.h.
+
+## Configuration Options in `config.h`
+
+* `BACKLIGHT_PIN B7` defines the pin that controlls the LEDs. Unless you design your own keyboard, you don't need to set this.
+* `BACKLIGHT_LEVELS 3` defines the number of brightness levels (maximum 15 excluding off).
+* `BACKLIGHT_BREATHING` if defined, enables backlight breathing. Note that this is only available if `BACKLIGHT_PIN` is B5, B6 or B7.
+* `BREATHING_PERIOD 6` defines the length of one backlight "breath" in seconds.
+
+## Notes on Implementation
+
+To change the brightness when using pins B5, B6 or B7, the PWM (Pulse Width Modulation) functionality of the on-chip timer is used.
+The timer is a counter that counts up to a certain TOP value (`0xFFFF` set in ICR1) before resetting to 0.
+We also set an OCR1x register.
+When the counter reaches the value stored in that register, the PWM pin drops to low.
+The PWM pin is pulled high again when the counter resets to 0.
+Therefore, OCR1x basically sets the duty cycle of the LEDs and as such the brightness where `0` is the darkest and `0xFFFF` the brightest setting.
+
+To enable the breathing effect, we register an interrupt handler to be called whenever the counter resets (with `ISR(TIMER1_OVF_vect)`).
+In this handler, which gets called roughly 244 times per second, we compute the desired brightness using a precomputed brightness curve.
+To disable breathing, we can just disable the respective interrupt vector and reset the brightness to the desired level.

docs/feature_rgblight.md

@@ -41,6 +41,7 @@ You can change the behavior of the RGB Lighting by setting these configuration v
 | `RGBLIGHT_HUE_STEP` | 10 | How many hues you want to have available. |
 | `RGBLIGHT_SAT_STEP` | 17 | How many steps of saturation you'd like. |
 | `RGBLIGHT_VAL_STEP` | 17 | The number of levels of brightness you want. |
+| `RGBLIGHT_LIMIT_VAL` | 255 | Limit the val of HSV to limit the maximum brightness simply. |
 
 ### Animations
 

docs/getting_started_build_tools.md

@@ -53,6 +53,7 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
     brew install avr-gcc
     brew install dfu-programmer
     brew install gcc-arm-none-eabi
+    brew install avrdude
 
 This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-libc can take over 20 minutes and exhibit high CPU usage.
 

docs/hardware_avr.md

@@ -101,8 +101,9 @@ By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are us
 
 ```
 #define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
 ```
 
 {% hint style='info' %}

docs/keycodes.md

@@ -256,11 +256,11 @@ This is a reference only. Each group of keys links to the page documenting their
 |---------|------------------------------------------|
 |`BL_TOGG`|Turn the backlight on or off              |
 |`BL_STEP`|Cycle through backlight levels            |
-|`BL_x`   |Set a specific backlight level between 0-9|
-|`BL_ON`  |An alias for `BL_9`                       |
-|`BL_OFF` |An alias for `BL_0`                       |
-|`BL_INC` |Increase backlight level                  |
-|`BL_DEC` |Decrease backlight level                  |
+|`BL_ON`  |Set the backlight to max brightness       |
+|`BL_OFF` |Turn the backlight off                    |
+|`BL_INC` |Increase the backlight level              |
+|`BL_DEC` |Decrease the backlight level              |
+|`BL_BRTG`|Toggle backlight breathing                |
 
 ## [RGB Lighting](feature_rgblight.md)
 

keyboards/acr60/config.h

@@ -5,11 +5,11 @@
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x2260
+#define PRODUCT_ID      0xCA60
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    MechKeysCa
+#define MANUFACTURER    MECHKEYS
 #define PRODUCT         ACR60
-#define DESCRIPTION     ACR60 Keyboard
+#define DESCRIPTION     60% customizable keyboard
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/acr60/readme.md

@@ -1,12 +1,15 @@
-# ACR60
+ACR60
+=====
 
 ![acr60](https://cdn.shopify.com/s/files/1/1697/5323/products/20170522001035_1024x1024.jpg?v=1504725199)
 
-A customizable 60% keyboard based on the DZ60.
+A customizable 60% keyboard made and sold by mechkeys.ca [More info on MECHKEYS](https://mechkeys.ca)
+
+Keyboard Maintainer: [TurboMech](https://github.com/TurboMech)
 
-Keyboard Maintainer: QMK Community  
 Hardware Supported: ACR60  
-Hardware Availability: [mechkeysca](https://mechkeys.ca/products/acr60)
+    
+Hardware Availability: [MECHKEYS](https://mechkeys.ca/products/acr60)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/alu84/alu84.c

@@ -0,0 +1,46 @@
+/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "alu84.h"
+#include "rgblight.h"
+#include "action_layer.h"
+#include "quantum.h"
+#include "action.h"
+
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
+
+
+

keyboards/alu84/alu84.h

@@ -0,0 +1,41 @@
+/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef ALU84_H
+#define ALU84_H
+
+#include "quantum.h"
+
+
+
+#define KEYMAP( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
+	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411,       K413, K414, K415, \
+	K500, K501,       K503,             K506,                   K510, K511, K512, K513, K514, K515  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215 }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO, K315 }, \
+	{ K400,  KC_NO, K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  KC_NO, K413,  K414,  K415 }, \
+	{ K500,  K501,  KC_NO, K503,  KC_NO, KC_NO, K506,  KC_NO, KC_NO, KC_NO, K510,  K511,  K512,  K513,  K514,  K515 }  \
+}
+
+#endif

keyboards/alu84/config.h

@@ -0,0 +1,76 @@
+/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef ALU84_CONFIG_H
+#define ALU84_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xCA75
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    MECHKEYS
+#define PRODUCT         ALU84
+#define DESCRIPTION     75% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 16
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, B7 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, F5, D4, B1, B0, B5, B4, D7, D6, B3, F4, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 10
+#define RGBLIGHT_VAL_STEP 10
+
+#define RGBLIGHT_ANIMATIONS
+
+#endif
+
+#endif

keyboards/alu84/keymaps/default/keymap.c

@@ -0,0 +1,144 @@
+#include "alu84.h"
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+#define _BL 0
+#define _FN1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* BL
+ * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - .
+ * | Esc | Scrn Brght Up | Scrn Bright Down | Expose | Launchpad | Show Desktop | Dock Hide Tog | Screen Capture | Shortcut | Shortcut | Shortcut| Shortcut | Play/Pause | Mute | Vol Up | Vol Down |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |  `  |       1       |         2        |    3   |     4     |      5       |      6        |        7       |     8    |     9    |     0   |    -     |    +    |   Backspace   |    POWER    |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |  TAB   |       Q       |        W       |    E    |     R     |      T       |      Y        |        U       |     I    |     O    |     P   |    [     |     ]      |      \      | Shortcut |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |    CAPS    |       A       |      S       |     D    |     F     |      G       |      H       |       J       |     K    |     L    |     ;   |    '     |          Enter          |   Pg Up  |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |     Shift     |      Z      |       X       |    C   |     V     |      B       |      N        |        M       |     ,    |     .    |     /   |     Shift      |       Up        |   Pg Dn  |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |   Control   |  Option/Alt  |     Gui     |                                                Space                              |   Gui   |   Opt   | Fn (layer) |   Left   |   Down  |   Right   |
+ * `- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -'
+ */
+
+	[_BL] = KEYMAP(
+		KC_ESC, KC_F14, KC_F15, LCTL(KC_UP), LCTL(KC_L), KC_F11, LALT(LGUI(KC_D)), LCTL(KC_S), LCTL(LSFT(KC_O)), LCTL(LGUI(KC_1)), LCTL(LGUI(KC_2)), LCTL(LGUI(KC_3)), KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, 
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_POWER, 	
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, LCTL(LGUI(KC_N)), 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, 
+		KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, KC_PGDN, 
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT),
+
+/* FN1
+ * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - .
+ * | Quit All |   F1   |    F2    |     F3      |     F4     |     F5      |      F6       |     F7    |    F8    |    F9    |   F10   |   F11   |   F12   |    Trns     |    Trns     |  DFU RESET |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |  Trns  |    Trns     |     Trns     |    Trns    |     Trns    |     Trns     |     Trns     |      Trns      |    Trns   |    Trns   |    Trns  |  Trns  |   Trns  |   DELETE  | Lock Shrct   |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |  Trns  |  RGB Toggle |  RGB Mode |  RGB Increase | RGB Decrease | RGB Hue Inc |  RGB Hue Dec  | RGB Sat Inc |   RGB Sat Dec |     Trns    |     Trns   |   Trns   |   Trns   |  Trns  |  Trns  |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |    Trns    |     Trns     |    Trns     |    Trns   |    Trns    |    Trns     |    Trns     |     Trns    |     Trns    |     Trns    |   Trns    |  Trns   |         Trns         |   Trns   |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |     Trns     | Backlight Tog | Backlight Inc | Backlight Dec | Backlight Step |   Trns    |   Trns   |   Trns   |   Trns   |    Trns    |    Trns   |    Trns    |       Trns        |  Trns   |
+ * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
+ * |    Trns    |    Trns    |     Trns    |                                                Trns                              |   Trns   |   Trns   |    Trns    |   Trns   |    Trns   |   Trns    |
+ * `- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -'
+ */
+
+	[_FN1] = KEYMAP(
+		LALT(LGUI(KC_Q)), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, RESET, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, LCTL(LALT(LGUI(KC_S))), 
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+		
+	} else {
+		
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/alu84/keymaps/turbomech/config.h

@@ -0,0 +1,25 @@
+/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#define TAPPING_TOGGLE 2
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/alu84/keymaps/turbomech/keymap.c

@@ -0,0 +1,176 @@
+/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "alu84.h"
+#include "turbomech.h"
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+#define _QWERTY 0 //BASE layer
+#define _FUNCTION 1 //Function layer
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* BL
+ * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -.
+ * |   Esc   |   Scrn  |   Scrn  | Expose  |Launchpad|   Show  |Dock Hide|  Screen | Shortcut| Shortcut| Shortcut| Shortcut|   Play  |  Mute   | Vol Up  | Vol Down|
+ * |         |Brght Up | Brght Dn|         |         | Desktop |  Toggle | Capture |         |         |         |         |   Pause |         |         |         |
+ * |- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -|
+ * |    `    |    1    |    2    |    3    |    4    |    5    |    6    |    7    |    8    |    9    |    0    |    -    |    +    |     Backspace     |  POWER  |
+ * |         |         |         |         |         |         |         |         |         |         |         |         |         |                   |         |
+ * |- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -|
+ * |     TAB      |    Q    |    W    |    E    |    R    |    T    |    Y    |    U    |    I    |    O    |    P    |    [    |     ]   |      \       | Shortcut|
+ * |              |         |         |         |         |         |         |         |         |         |         |         |         |              |         |
+ * |- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -|
+ * |      CAPS       |    A    |    S    |    D    |    F    |    G    |    H    |    J    |    K    |    L    |    ;    |    '    |        Enter        |   Page  |
+ * |                 |         |         |         |         |         |         |         |         |         |         |         |                     |    Up   |
+ * |- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+
+ * |        Shift         |    Z    |    X    |    C    |    V    |    B    |    N    |    M    |    ,    |    .    |    /    |     Shift      |   Up    |  Page   |
+ * |                      |         |         |         |         |         |         |         |         |         |         |                |         |  Down   |
+ * |- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -|
+ * |  Control |   Option   |     Gui    |                             Space                            |   Gui   |   Opt   |    Fn   |  Left   |   Down  |  Right  |
+ * |          |    /Alt    |            |                                                              |         |   Alt   |         |         |         |         |
+ * `- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -'
+ */
+
+	[_QWERTY] = KEYMAP(
+		KC_ESC, KC_F14, KC_F15, LCTL(KC_UP), LCTL(KC_L), KC_F11, LALT(LGUI(KC_D)), LCTL(KC_S), LCTL(LSFT(KC_O)), LCTL(LGUI(KC_1)), LCTL(LGUI(KC_2)), LCTL(LGUI(KC_3)), KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU,
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_POWER,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, LCTL(LGUI(KC_N)),
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+		KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, KC_PGDN,
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT),
+
+/* FN1 - SEE readme.md
+ * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -.
+ * |   Quit  |   F1    |    F2   |   F3    |   F4    |   F5    |    F6   |   F7    |    F8   |    F9   |   F10   |   F11   |   F12   |  Trns   |  Trns   |   DFU   |
+ * |   All   |         |         |         |         |         |         |         |         |         |         |         |         |         |         |  Reset  |
+ * |- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -|
+ * |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |       Delete      |   Lock  |
+ * |         |         |         |         |         |         |         |         |         |         |         |         |         |                   |Shortcut |
+ * |- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -|
+ * |     Trns     |   RGB   |   RGB   |   RGB   |   RGB   | RGB Hue | RGB Hue | RGB Sat | RGB Sat |  Trns   |   Trns  |   Trns  |   Trns  |     Trns     |   Trns  |
+ * |              |  Toggle |   Mode  | Increase| Decrease| Increase| Decrease| Increase| Decrease|         |         |         |         |              |         |
+ * |- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -|
+ * |      Trns       |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |  Trns   |  Trns   |   Trns  |   Trns  |  Trns   |   Trns  |        Trns         |   Trns  |
+ * |                 |         |         |         |         |         |         |         |         |         |         |         |                     |         |
+ * |- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+
+ * |         Trns         |Backlight|Backlight|Backlight|Backlight|   Trns  |  Trns   |   Trns  |   Trns  |   Trns  |   Trns  |     Trns       |  Trns   |  Trns   |
+ * |                      |  Toggle | Increase| Decrease|   Step  |         |         |         |         |         |         |                |         |         |
+ * |- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -|
+ * |   Trns   |    Trns    |    Trns    |                             Trns                             |  Trns   |  Trns   |  Trns   |  Trns   |   Trns  |  Trns   |
+ * |          |            |            |                                                              |         |         |         |         |         |         |
+ * `- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -'
+ */
+
+
+	[_FUNCTION] = KEYMAP(
+		LALT(LGUI(KC_Q)), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_RESET,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, LCTL(LALT(LGUI(KC_S))),
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	//switch (id) {
+   // case _FLIP:
+    //  if (record->event.pressed)
+
+          //SEND_STRING("(╯°□°）╯︵ ┻━┻");
+    //  }
+    //  return false;
+     // break;
+ // }
+
+	return MACRO_NONE;
+};
+
+
+
+void matrix_scan_user(void) {
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/alu84/keymaps/turbomech/readme.md

@@ -0,0 +1,93 @@
+# This is u/TurboMech's keyboard layout for ALU84.  
+
+## It is designed for Mac OS, due to the specific functions I created.  
+
+### Here is the layout found in the keymap.c file.
+#####  I use shortcuts for the Function row (above number row) listed below
+  - Scrn Bright Up: F14
+  - Scrn Bright Down: F15
+  - Expose: LCTRL + Up 
+  - Launchpad: LCTRL + L
+  - Show Desktop: F11
+  - Show/Hide Dock: LALT + LGUI + D
+  - Screen Capture: LCTRL + S
+  - Custom Shortcut (setup for an application I use frequently): LCTRL + LSHFT + O
+  - Custom Shortcut 1: LCTRL + LGUI + 1
+  - Custom Shortcut 2: LCTRL + LGUI + 2
+  - Custom Shortcut 3: LCTRL + LGUI + 3 
+    - use the custom shortcuts for whatever you want: launch an application, a macro, etc.
+  - Play/Pause: exactly that
+  - Mute / Volume Up / Volume Down: exactly what it says
+
+ ##### Going down the right side from Vol Down:
+  - POWER: this serves as the power button on Mac's only.  Press and hold the button as you would on your Macbook or iMac keyboard.
+  - Menu: this slides the notification bar on the right side (its the same as on iPhones/ iPads) 
+
+### See below keymaps for how to setup shortcuts on Mac
+
+#### Base Layer
+```
+.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -. 
+|   Esc   |   Scrn  |   Scrn  | Expose  |Launchpad|   Show  |Dock Hide|  Screen | Shortcut| Shortcut| Shortcut| Shortcut|   Play  |  Mute   | Vol Up  | Vol Down|
+|         |Brght Up | Brght Dn|         |         | Desktop |  Toggle | Capture |         |         |         |         |   Pause |         |         |         |
+|- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -|
+|    `    |    1    |    2    |    3    |    4    |    5    |    6    |    7    |    8    |    9    |    0    |    -    |    +    |     Backspace     |  POWER  | 
+|         |         |         |         |         |         |         |         |         |         |         |         |         |                   |         |
+|- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -|
+|     TAB      |    Q    |    W    |    E    |    R    |    T    |    Y    |    U    |    I    |    O    |    P    |    [    |     ]   |      \       | Shortcut|
+|              |         |         |         |         |         |         |         |         |         |         |         |         |              |         |
+|- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -|
+|      CAPS       |    A    |    S    |    D    |    F    |    G    |    H    |    J    |    K    |    L    |    ;    |    '    |        Enter        |   Page  |
+|                 |         |         |         |         |         |         |         |         |         |         |         |                     |    Up   |
+|- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+
+|        Shift         |    Z    |    X    |    C    |    V    |    B    |    N    |    M    |    ,    |    .    |    /    |     Shift      |   Up    |  Page   |
+|                      |         |         |         |         |         |         |         |         |         |         |                |         |  Down   |
+|- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -|
+|  Control |   Option   |     Gui    |                             Space                            |   Gui   |   Opt   |    Fn   |  Left   |   Down  |  Right  |
+|          |    /Alt    |            |                                                              |         |   Alt   |         |         |         |         |
+'- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -'
+```
+#### Function Layer 1 - See above for shortcuts
+```
+.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -.
+|   Quit  |   F1    |    F2   |   F3    |   F4    |   F5    |    F6   |   F7    |    F8   |    F9   |   F10   |   F11   |   F12   |  Trns   |  Trns   |   DFU   |
+|   All   |         |         |         |         |         |         |         |         |         |         |         |         |         |         |  Reset  |
+|- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -|
+|   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |       Delete      |   Lock  | 
+|         |         |         |         |         |         |         |         |         |         |         |         |         |                   |Shortcut |
+|- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -|
+|     Trns     |   RGB   |   RGB   |   RGB   |   RGB   | RGB Hue | RGB Hue | RGB Sat | RGB Sat |  Trns   |   Trns  |   Trns  |   Trns  |     Trns     |   Trns  | 
+|              |  Toggle |   Mode  | Increase| Decrease| Increase| Decrease| Increase| Decrease|         |         |         |         |              |         |
+|- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -|
+|      Trns       |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |  Trns   |  Trns   |   Trns  |   Trns  |  Trns   |   Trns  |        Trns         |   Trns  |
+|                 |         |         |         |         |         |         |         |         |         |         |         |                     |         |
+|- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+
+|         Trns         |Backlight|Backlight|Backlight|Backlight|   Trns  |  Trns   |   Trns  |   Trns  |   Trns  |   Trns  |     Trns       |  Trns   |  Trns   |
+|                      |  Toggle | Increase| Decrease|   Step  |         |         |         |         |         |         |                |         |         |
+|- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -|
+|   Trns   |    Trns    |    Trns    |                             Trns                             |  Trns   |  Trns   |  Trns   |  Trns   |   Trns  |  Trns   |
+|          |            |            |                                                              |         |         |         |         |         |         |
+'- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -'
+```
+
+#### How to use/ setup shortcuts on Mac
+- First navigate to System Preferences > Keyboard > Shortcuts
+  - You can use any of them in here
+  - Just set them to the shortcut keys listed above
+
+#### How to make your own (to launch applications, quit all, etc.)
+- Navigate to Automator > New Document > click Service > Choose
+- Now we have to setup our shortcut
+  - Here's how to setup the Quit All Shortcut
+    - In the right window select the Service recieves dropdown > select No Input
+    - At the top left click the Name (Search) > type quit > click and hold Quit All Applications > drag to the right hand box (under the Service Recieves) 
+      - **IMPORTANT** You have to click the Run button at the upper right hand corner in order for these to actually work. 
+    - Now click File > Save > save it as Quit All Apps (or whatever you want) / you can also just exit out and it'll ask you if you want to save
+- Navigate back to System Preferences > Keyboard > Shortcuts
+    - The new shortcut can be found under services, set it to one of the shortcuts I listed above and done
+- The same applies for applications in the Name (search) just type the application you want to have as shortcut. Don't forget to run it, then do the same steps
+  to set it up as a shortcut.
+
+
+
+

keyboards/alu84/keymaps/turbomech/rules.mk

@@ -0,0 +1,15 @@
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= yes
+UNICODE_ENABLE ?= yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/alu84/readme.md

@@ -0,0 +1,18 @@
+ALU84
+===
+
+![alu84](https://i.imgur.com/wBfazDc.jpg)
+
+A 75% keyboard made and sold by MECHKEYS [More info on MECHKEYS](https://mechkeys.ca).
+
+Keyboard Maintainer: [TurboMech](https://github.com/TurboMech)
+
+Hardware Supported: ALU84
+
+Hardware Availability: [MECHKEYS](https://mechkeys.ca)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alu84:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/alu84/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= yes

keyboards/atomic/keymaps/pvc/keymap.c

@@ -345,14 +345,14 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_BREATH_SPEED_INC:
             if (record->event.pressed)
             {
-                breathing_speed_inc(1);
+                breathing_period_inc();
             }
             break;
 
         case MACRO_BREATH_SPEED_DEC:
             if (record->event.pressed)
             {
-                breathing_speed_dec(1);
+                breathing_period_dec();
             }
             break;
 
@@ -374,7 +374,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_UPPER);
-                breathing_speed_set(2);
+                breathing_period_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -389,7 +389,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_LOWER);
-                breathing_speed_set(2);
+                breathing_period_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -403,13 +403,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_FUNCTION:
             if (record->event.pressed)
             {
-                breathing_speed_set(3);
+                breathing_period_set(3);
                 breathing_enable();
                 layer_on(LAYER_FUNCTION);
             }
             else
             {
-                breathing_speed_set(1);
+                breathing_period_set(1);
                 breathing_self_disable();
                 layer_off(LAYER_FUNCTION);
             }

keyboards/bananasplit/config.h

@@ -42,7 +42,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MATRIX_HAS_GHOST
 
 /* number of backlight levels */
-#define BACKLIGHT_LEVELS  1
+#define BACKLIGHT_LEVELS 3
 
 /* mapping backlight LEDs to correct Pin */
 #define BACKLIGHT_PIN B7

keyboards/bananasplit/keymaps/coloneljesus/config.h

@@ -21,5 +21,7 @@
 
 // place overrides here
 #define GRAVE_ESC_CTRL_OVERRIDE
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 8
 
 #endif

keyboards/bananasplit/keymaps/coloneljesus/keymap.c

@@ -16,7 +16,7 @@
 #include "bananasplit.h"
 
 enum custom_keycodes {
-  WIN_SWITCH_LAYOUT = SAFE_RANGE
+  WIN_SWITCH_LAYOUT = SAFE_RANGE,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -57,7 +57,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  KC_F6,   KC_F7,         KC_F8,         KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, \
     KC_CAPS, KC_MPRV, KC_VOLU, KC_MNXT, KC_PGUP, KC_INS, KC_HOME, LCTL(KC_LEFT), LCTL(KC_RGHT), KC_END,  _______, _______, _______, KC_PSCR, \
     _______, KC_MUTE, KC_VOLD, KC_MPLY, KC_PGDN, KC_DEL, KC_LEFT, KC_DOWN,       KC_UP,         KC_RGHT, _______, _______, _______, \
-    _______,          _______, _______, _______, _______,_______, LCTL(KC_BSPC), LCTL(KC_DEL),  _______, _______, _______, _______, _______, \
+    _______,          BL_STEP, BL_BRTG, _______, _______,_______, LCTL(KC_BSPC), LCTL(KC_DEL),  _______, _______, _______, _______, _______, \
     _______, _______, _______,          _______, _______,_______,                _______,       _______, _______, _______, RESET \
 ),
 };
@@ -76,19 +76,19 @@ void matrix_scan_user(void) {
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
+
     case WIN_SWITCH_LAYOUT: {
       // Sends Alt+Shift on both key down and key up. 
       // Designed to switch between two keyboard layouts on Windows using a locking switch.
       // Does nothing if right shift is pressed for easy resync.
-      if (!(get_mods() & MOD_BIT(KC_RSFT))) {
+      if (!(get_mods() & MOD_BIT(KC_RSFT)))
         SEND_STRING(SS_DOWN(X_LALT)SS_TAP(X_LSHIFT)SS_UP(X_LALT));
-        return false;
-      }
-      else
-        return false;
+      return false;
     }
+
+    default:
+      return true;
   }
-  return true;
 }
 
 void led_set_user(uint8_t usb_led) {

keyboards/bananasplit/keymaps/kamon/config.h

@@ -0,0 +1,25 @@
+/* Copyright 2017 Balz Guenat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+#define GRAVE_ESC_CTRL_OVERRIDE
+
+#endif

keyboards/bananasplit/keymaps/kamon/keymap.c

@@ -0,0 +1,96 @@
+/* Copyright 2017 Balz Guenat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bananasplit.h"
+
+#define ______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/*
+-------------------------------------------------------------------------------------------
+|GvEsc|  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |
+-------------------------------------------------------------------------------------------
+|  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    |
+-------------------------------------------------------------------------------------------
+|  Ctrl   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+-------------------------------------------------------------------------------------------
+|    Shift    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |     |
+-------------------------------------------------------------------------------------------
+| Fn1   |  GUI  |  Alt  |   Space    | Space |   Space    |  Alt  |  Fn1  |  Fn1  | Ctrl  |
+-------------------------------------------------------------------------------------------
+*/
+[0] = KEYMAP( \
+    KC_GESC, KC_1,    KC_2,    KC_3, KC_4,   KC_5,  KC_6,   KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R,   KC_T,  KC_Y,   KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+    KC_LCTL, KC_A,    KC_S,    KC_D, KC_F,   KC_G,  KC_H,   KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+    KC_LSFT,          KC_Z,    KC_X, KC_C,   KC_V,  KC_B,   KC_N, KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, M(0),\
+    MO(1), KC_LGUI, KC_LALT,   KC_SPC, KC_SPC, KC_SPC,      KC_RALT, MO(1), KC_NO,   MO(1),  KC_RCTL \
+),
+/*
+-------------------------------------------------------------------------------------------
+|  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |  Delete   |
+-------------------------------------------------------------------------------------------
+| TAB    |Home | Up | End  |PgUp |     |     |     |     |     |     |     |     | PrtSc  |
+-------------------------------------------------------------------------------------------
+|  Ctrl   |Left |Down |Right |PgDn |    |     |     |     |     |     |     |      Enter  |
+-------------------------------------------------------------------------------------------
+|    Shift    |     |     |     |     |     |     |     |     |     |     |  Shift  |     |
+-------------------------------------------------------------------------------------------
+| Fn1   |  GUI  |  Alt  |   Space    | Space |   Space    |  Alt  |       |       | Ctrl  |
+-------------------------------------------------------------------------------------------
+*/
+[1] = KEYMAP( \
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  KC_F6,   KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_DEL, \
+    KC_TAB,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, ______, ______,  ______, ______, ______, ______, ______, ______, KC_PSCR, \
+    KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, ______, ______,  ______, ______, ______, ______, ______, ______, \
+    KC_LSFT, ______,  ______,  ______,  ______,  ______, ______,  ______, ______, ______, ______, KC_RSFT, ______, \
+    ______,  KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC, KC_RALT, ______, ______, ______, KC_RCTL \
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  switch(id) {
+      case 0:
+        // Sends Alt+Shift on both key down and key up. 
+        // Fesigned to switch between two keyboard layouts on Windows using a locking switch.
+        // Does nothing if right shift is pressed for easier resync.
+        if (!(get_mods() & MOD_BIT(KC_RSFT)))
+          return MACRO(D(LALT), T(LSFT), U(LALT), END);
+        else
+          return MACRO_NONE;
+  }
+  return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/bananasplit/keymaps/kamon/readme.md

@@ -0,0 +1,34 @@
+# Kamon's keymap for the Bananasplit
+A simple layout to get you started with the BananaSplit60.
+
+Default layer:
+
+```
+-------------------------------------------------------------------------------------------
+|GvEsc|  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |
+-------------------------------------------------------------------------------------------
+|  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    |
+-------------------------------------------------------------------------------------------
+|  Ctrl   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+-------------------------------------------------------------------------------------------
+|    Shift    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |     |
+-------------------------------------------------------------------------------------------
+| Fn1   |  GUI  |  Alt  |   Space    | Space |   Space    |  Alt  |  Fn1  |  Fn1  | Ctrl  |
+-------------------------------------------------------------------------------------------
+```
+
+Fn1 layer:
+
+```
+-------------------------------------------------------------------------------------------
+|  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |  Delete   |
+-------------------------------------------------------------------------------------------
+| TAB    |Home | Up | End  |PgUp |     |     |     |     |     |     |     |     | PrtSc  |
+-------------------------------------------------------------------------------------------
+|  Ctrl   |Left |Down |Right |PgDn |    |     |     |     |     |     |     |      Enter  |
+-------------------------------------------------------------------------------------------
+|    Shift    |     |     |     |     |     |     |     |     |     |     |  Shift  |     |
+-------------------------------------------------------------------------------------------
+| Fn1   |  GUI  |  Alt  |   Space    | Space |   Space    |  Alt  |       |       | Ctrl  |
+-------------------------------------------------------------------------------------------
+```

keyboards/bananasplit/keymaps/kamon/rules.mk

@@ -0,0 +1,37 @@
+# Copyright 2017 Balz Guenat
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+# BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+# EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+# CONSOLE_ENABLE = no         # Console for debug(+400)
+# COMMAND_ENABLE = yes        # Commands for debug and configuration
+# NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+# MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+# AUDIO_ENABLE = no           # Audio output on port C6
+# UNICODE_ENABLE = no         # Unicode
+# BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+# RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+# SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0

@@ -1,77 +0,0 @@
-# Target file name (without extension).
-PROJECT = ch
-
-# Directory common source files exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MK20DX128
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x5
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_3
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-
-include $(TMK_DIR)/tool/chibios/common.mk
-include $(TMK_DIR)/tool/chibios/chibios.mk

keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2

@@ -1,77 +0,0 @@
-# Target file name (without extension).
-PROJECT = ch
-
-# Directory common source files exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MK20DX256
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-
-include $(TMK_DIR)/tool/chibios/common.mk
-include $(TMK_DIR)/tool/chibios/chibios.mk

keyboards/chimera_ortho/info.json

@@ -0,0 +1,247 @@
+{
+  "keyboard_name": "",
+  "manufacturer": "",
+  "identifier": "",
+  "url": "",
+  "maintainer": "qmk",
+  "processor": "",
+  "bootloader": "",
+  "width": 15.5,
+  "height": 4.25,
+  "layouts": {
+    "KEYMAP": {
+      "layout": [
+        {
+          "label": "Esc",
+          "x": 0,
+          "y": 0
+        },
+        {
+          "label": "Q",
+          "x": 1,
+          "y": 0
+        },
+        {
+          "label": "W",
+          "x": 2,
+          "y": 0
+        },
+        {
+          "label": "E",
+          "x": 3,
+          "y": 0
+        },
+        {
+          "label": "R",
+          "x": 4,
+          "y": 0
+        },
+        {
+          "label": "T",
+          "x": 5,
+          "y": 0
+        },
+        {
+          "label": "{",
+          "x": 6,
+          "y": 0
+        },
+        {
+          "label": "}",
+          "x": 8.5,
+          "y": 0
+        },
+        {
+          "label": "Y",
+          "x": 9.5,
+          "y": 0
+        },
+        {
+          "label": "U",
+          "x": 10.5,
+          "y": 0
+        },
+        {
+          "label": "I",
+          "x": 11.5,
+          "y": 0
+        },
+        {
+          "label": "O",
+          "x": 12.5,
+          "y": 0
+        },
+        {
+          "label": "P",
+          "x": 13.5,
+          "y": 0
+        },
+        {
+          "label": "\"",
+          "x": 14.5,
+          "y": 0
+        },
+        {
+          "label": "Tab",
+          "x": 0,
+          "y": 1
+        },
+        {
+          "label": "A",
+          "x": 1,
+          "y": 1
+        },
+        {
+          "label": "S",
+          "x": 2,
+          "y": 1
+        },
+        {
+          "label": "D",
+          "x": 3,
+          "y": 1
+        },
+        {
+          "label": "F",
+          "x": 4,
+          "y": 1
+        },
+        {
+          "label": "G",
+          "x": 5,
+          "y": 1
+        },
+        {
+          "label": "-",
+          "x": 6,
+          "y": 1
+        },
+        {
+          "label": "1",
+          "x": 8.5,
+          "y": 1
+        },
+        {
+          "label": "H",
+          "x": 9.5,
+          "y": 1
+        },
+        {
+          "label": "J",
+          "x": 10.5,
+          "y": 1
+        },
+        {
+          "label": "K",
+          "x": 11.5,
+          "y": 1
+        },
+        {
+          "label": "L",
+          "x": 12.5,
+          "y": 1
+        },
+        {
+          "label": ";",
+          "x": 13.5,
+          "y": 1
+        },
+        {
+          "label": "Enter",
+          "x": 14.5,
+          "y": 1
+        },
+        {
+          "label": "(",
+          "x": 0,
+          "y": 2
+        },
+        {
+          "label": "Z",
+          "x": 1,
+          "y": 2
+        },
+        {
+          "label": "X",
+          "x": 2,
+          "y": 2
+        },
+        {
+          "label": "C",
+          "x": 3,
+          "y": 2
+        },
+        {
+          "label": "V",
+          "x": 4,
+          "y": 2
+        },
+        {
+          "label": "B",
+          "x": 5,
+          "y": 2
+        },
+        {
+          "label": "=",
+          "x": 6,
+          "y": 2
+        },
+        {
+          "label": "8",
+          "x": 8.5,
+          "y": 2
+        },
+        {
+          "label": "N",
+          "x": 9.5,
+          "y": 2
+        },
+        {
+          "label": "M",
+          "x": 10.5,
+          "y": 2
+        },
+        {
+          "label": ",",
+          "x": 11.5,
+          "y": 2
+        },
+        {
+          "label": ".",
+          "x": 12.5,
+          "y": 2
+        },
+        {
+          "label": "/",
+          "x": 13.5,
+          "y": 2
+        },
+        {
+          "label": ")",
+          "x": 14.5,
+          "y": 2
+        },
+        {
+          "label": "Num Layer",
+          "x": 4,
+          "y": 3.25
+        },
+        {
+          "label": "Back Space",
+          "x": 5,
+          "y": 3.25
+        },
+        {
+          "label": "Space",
+          "x": 9.5,
+          "y": 3.25
+        },
+        {
+          "label": "Symbol Layer",
+          "x": 10.5,
+          "y": 3.25
+        }
+      ]
+    }
+  }
+}

keyboards/chimera_ortho/keymaps/gordon/keymap.c

@@ -0,0 +1,389 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include "chimera_ortho.h"
+#include "action_layer.h"
+#include "version.h"
+#include "process_keycode/process_tap_dance.h"
+#include "gordon.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+#define KC_SNAPLEFT LGUI(KC_LEFT)
+#define KC_SNAPRIGHT LGUI(KC_RIGHT)
+#define KC_SNAPUP LGUI(KC_UP)
+#define KC_SNAPDOWN LGUI(KC_DOWN)
+#define KC_PREVTAB LCTL(LSFT(KC_TAB))
+#define KC_NEXTTAB LCTL(KC_TAB)
+#define KC_WORKRIGHT LCTL(LGUI(KC_RIGHT))
+#define KC_WORKLEFT LCTL(LGUI(KC_LEFT))
+
+#define KC_NMPD TG(_NUMPAD)
+#define KC_SYMB TG(_SYMBOLS)
+
+#define KC_SCTL MT(MOD_LCTL, KC_LBRC)
+#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
+#define KC_SPLT MT(MOD_LALT, KC_MINS)
+#define KC_SPRT MT(MOD_LALT, KC_1)
+#define KC_GBRC MT(MOD_RGUI, KC_8)
+#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
+#define KC_CSHW MT(MOD_LCTL|MOD_LSFT,KC_W)
+
+#define KC_CDEL LCTL(KC_DEL)
+#define KC_AUDUP KC_AUDIO_VOL_UP
+#define KC_AUDOWN KC_AUDIO_VOL_DOWN
+
+
+#define KC_MEHS MEH_T(KC_S)
+#define KC_MEHL MEH_T(KC_L)
+#define KC_GWIN GUI_T(KC_G)
+#define KC_FCTL CTL_T(KC_F)
+#define KC_JCTL CTL_T(KC_J)
+#define KC_ZCTL CTL_T(KC_Z)
+#define KC_ALTV ALT_T(KC_V)
+#define KC_ALTN ALT_T(KC_N)
+#define KC_MEHX ALL_T(KC_X)
+#define KC_RESET RESET
+
+//LTs
+#define KC_MESC LT(_MACROS, KC_ESC)
+#define KC_DNUM LT(_NUMPAD, KC_D)
+#define KC_SPFN LT(_NAV,KC_EQL)
+#define KC_EMAUS LT(_MOUSE,KC_E)
+#define KC_ENAV LT(_NAV,KC_E)
+#define KC_INAV LT(_TEXTNAV,KC_I)
+#define KC_BSPSYM LT(_SYMBOLS,KC_BSPACE)
+#define KC_ENTSYM LT(_SYMBOLS,KC_ENTER)
+#define KC_CLNMAUS LT(_MOUSE,KC_SCOLON)
+
+#define KC_FUNC TT(_FUNCTION)
+
+//TAP DANCE
+#define KC_F6F7 TD(F6F7)
+#define KC_ALF4 TD(ALTF4)
+#define KC_TTT TD(TTT)
+#define KC_ENHM TD(HOME_END)
+#define KC_CLPS TD(CALC_PRINTSCREEN)
+
+
+#define KC_INCL M(0)
+#define KC_PULL M(1)
+#define KC_PUSH M(2)
+#define KC_SCAP M(3)
+#define KC_SCOF M(4)
+#define KC_CAD LALT(LCTL(KC_DEL))
+
+#define LONGPRESS_DELAY 150
+//#define LAYER_TOGGLE_DELAY 300
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define KC_ KC_TRNS 
+
+/* TODO: 
+ *
+ * DONE: RESET and CAD into macro layer.
+ * DONE: WINUP AND WINDOWN in NAV layer
+ * DONE: Get rid of caps layer. not sure what it is even for.
+ * DONE: LMEH
+ * DONE: plus, divide, multiply on left hand for num layer
+ * DONE: F1 - F12 on a layer toggle (not a temp toggle but a one shot or something)
+ * DONE: Volume, page up and down for mouse layer.
+ * DONE: Add full user files - without using anything.
+ * DONE: Insert, ctrl delete
+ * DONE: Home and End
+ * DONE: Printscreen
+
+ * Easier way to open new terminal (instead of alt + F2)
+ * Intellij/text navigation layer (ctrl delete could be here).
+ * Macro for "System.exit(0)" probably macro layer and "c"
+ * Some sort of tap dance for comma, H, right pinky, and possibly other corners.
+ * Something more with the right hand. not sure what.
+ * Mouse: Left scroll, right scroll
+ * Passwords and any other macros.
+ * LED for control
+ * All modifiers reset
+ * Russain layer
+ * Hebrew layer
+ * Get rid of stupid git pull and push macros.
+ * 
+*/
+
+//Tap dance enums
+enum {
+  F12ETAPS = 0,
+  CALCCOMP,
+  ALTF4,
+  F6F7,
+  TTT,
+  HOME_END,
+  CALC_PRINTSCREEN
+};
+
+static xtap ttt_state = { 
+  .is_press_action = true,
+  .state = 0
+};
+
+
+//Already exists in gordon.c, shouldn't need this anymore
+/*// To activate SINGLE_HOLD, you will need to hold for 200ms first. 
+// This tap dance favors keys that are used frequently in typing like 'f'
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    if (state->interrupted) {
+      return SINGLE_TAP;
+    }
+    else {
+      if (!state->pressed) return SINGLE_TAP;
+      else return SINGLE_HOLD;
+    }
+  }
+  //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated
+  //with single tap.
+  else if (state->count == 2) {
+    if (state->interrupted) return DOUBLE_SINGLE_TAP;
+    else if (state->pressed) return DOUBLE_HOLD;
+    else return DOUBLE_TAP; 
+  } 
+  else if ((state->count == 3) && ((state->interrupted) || (!state->pressed))) return TRIPLE_TAP;
+  else if (state->count == 3) return TRIPLE_HOLD;
+  else return 8; //magic number. At some point this method will expand to work for more presses
+}*/
+
+/* "Super tap toggle"
+ * Basically, TT but for two or more layers for a single key.
+ * This particular dance:
+ * Single tap/hold - TT for Function layer
+ * Double tap/hold - TT for Numpad layer
+ * Triple tap/hold - TT for Mouse layer
+ *
+*/
+void TTT_finished (qk_tap_dance_state_t *state, void *user_data) {
+  ttt_state.state = cur_dance(state);
+  switch (ttt_state.state) {
+    case SINGLE_TAP: layer_invert(_FUNCTION); break;
+    case SINGLE_HOLD: layer_on(_FUNCTION); break;
+    case DOUBLE_TAP: layer_invert(_NUMPAD); break;
+    case DOUBLE_HOLD: layer_on(_NUMPAD); break;
+    case DOUBLE_SINGLE_TAP: layer_invert(_NUMPAD); break;
+    case TRIPLE_TAP: layer_invert(_MOUSE); break;
+    case TRIPLE_HOLD: layer_on(_MOUSE); break;
+  }
+}
+
+void TTT_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (ttt_state.state) {
+    case SINGLE_TAP: break;
+    case SINGLE_HOLD: layer_off(_FUNCTION); break;
+    case DOUBLE_TAP:  break;
+    case DOUBLE_HOLD: layer_off(_NUMPAD); break;
+    case DOUBLE_SINGLE_TAP:  break;
+    case TRIPLE_TAP:  break;
+    case TRIPLE_HOLD: layer_off(_MOUSE); break;
+  }
+  ttt_state.state = 0;
+}
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+  // simple tap dance
+  [F12ETAPS] = ACTION_TAP_DANCE_DOUBLE(KC_F12,LSFT(LCTL(KC_F10))),  
+  [CALCCOMP] = ACTION_TAP_DANCE_DOUBLE(KC_CALCULATOR, KC_MY_COMPUTER),
+  [CALC_PRINTSCREEN] = ACTION_TAP_DANCE_DOUBLE(KC_CALCULATOR, KC_PSCR),
+  [ALTF4] = ACTION_TAP_DANCE_DOUBLE(KC_F4,LALT(KC_F4)),
+  [F6F7] = ACTION_TAP_DANCE_DOUBLE(LSFT(KC_F6), LALT(KC_F7)),
+  [HOME_END] = ACTION_TAP_DANCE_DOUBLE(KC_END, KC_HOME),
+  [TTT] = ACTION_TAP_DANCE_FN_ADVANCED(NULL,TTT_finished, TTT_reset),
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = KEYMAP(
+  //,----+----+----+----+----+----+----.      ,----+----+----+----+----+----+----.
+     MESC, Q  ,CSHW,ENAV, R  , T  ,SPC ,       CLPS, Y  , U  ,INAV, O  , P  ,TTT,
+  //|----+----+----+----+----+----+----|      |----+----+----+----+----+----+----|
+     TAB , A , MEHS,DNUM,FCTL,GWIN,GRAVE,      TILD, H  ,JCTL, K ,MEHL,CLNMAUS,ENHM,
+  //|----+----+----+----+----+----+----|      |----+----+----+----+----+----+----|
+    MINUS,ZCTL,MEHX, C  ,ALTV, B  ,DELETE,     INS ,ALTN, M  ,COMM,DOT ,SLSH,UNDS,
+  //|----+----+----+----+----+----+----|      |----+----+----+----+----+----+----|
+                         LSHIFT,BSPSYM,                SPC ,ENTSYM
+  // \------------------+----+----+---/       \---+----+----+-------------------/
+  ),
+
+  [_NUMPAD] = KEYMAP(  
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+         ,    ,    ,    ,ASTR,    ,    ,          ,    , 7  , 8  , 9  ,ASTR,/**/,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,MINS,PLUS,/**/,EQUAL,    ,   ,          ,    , 4  , 5  , 6  ,PLUS,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,    ,    ,    ,SLSH,    ,    ,          ,    , 1  , 2  , 3  ,SLSH,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+                             ,    ,                     , 0  
+  // \------------------+----+----+---/       \---+----+----+-------------------/
+  ),
+
+  [_SYMBOLS] = KEYMAP(  
+  //,----+----+-----+----+----+----+----.     ,----+----+----+----+----+----+----.
+         ,EXLM, AT  ,LCBR,RCBR,HASH,    ,          ,CIRC,AMPR,ASTR,LPRN,RPRN,/**/,
+  //|----+----+-----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,EXLM,EXLM,LPRN,RPRN ,    ,    ,          ,    ,DQUO,EQUAL,QUOTE,RCBR,    ,
+  //|----+----+----+----+----+----+----|      |----+----+----+----+----+----+----|
+      ,DOLLAR, PERC,LBRACKET,RBRACKET, ,      ,    ,PIPE,BSLASH,PLUS,  ,  ,  ,
+  //|----+----+-----+----+----+----+----|     |----+----+----+----+----+----+----|
+                          UNDS,/**/,                    ,/**/
+  // \-------------------+----+----+---/       \---+----+----+-------------------/
+  ),
+
+  [_FUNCTION] = KEYMAP(  
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+    F6F7 ,F1  ,F2  ,F3  ,ALF4,F5  ,F6  ,      F7  ,F8  ,F9  ,F10 ,F11 ,F12 ,/**/,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+                             ,    ,                    ,    
+  // \------------------+----+----+---/       \---+----+----+-------------------/
+  ),
+
+  [_NAV] = KEYMAP(  
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+      ,   ,SNAPLEFT,/**/,SNAPRIGHT,,  ,           ,    ,    , UP ,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+     ,SNAPUP,PREVTAB, ,NEXTTAB,SNAPDOWN,,   ,    ,LEFT,DOWN,RGHT,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+    ,    ,WORKLEFT,    ,WORKRIGHT,,    ,          ,    ,PGUP,PGDN,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+                            CDEL ,DEL,                 ,    
+  // \------------------+----+----+---/       \---+----+----+-------------------/
+  ),
+
+  [_TEXTNAV] = KEYMAP(  
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+         ,   ,    ,    ,    ,    ,  ,             ,    ,    ,/**/,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+                                 ,    ,                 ,    
+  // \------------------+----+----+---/       \---+----+----+-------------------/
+  ),
+
+   [_MOUSE] = KEYMAP(  
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+         ,    ,    ,MS_UP,   ,   ,    ,      ,    ,    , UP ,    ,    ,    ,/**/
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+      ,   ,MS_LEFT,MS_DOWN,MS_RIGHT,   ,    ,     ,    ,LEFT,DOWN,RGHT,/**/,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+                      ,MS_BTN1 ,MS_BTN2              ,    
+  // \------------------+----+----+---/       \---+----+----+-------------------/
+  ), 
+
+
+  [_MACROS] = KEYMAP(  
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+    /**/,RESET,SECRET_2,SECRET_3,   ,   ,   ,SYSTEM_SLEEP,    ,    ,INCL,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+     CAD ,SECRET_1,    ,   ,   ,   ,   ,      ,    ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+     SCAP,    ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,SCAP,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+                             ,    ,                    ,    
+  // \------------------+----+----+---/       \---+----+----+-------------------/
+  )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {
+    /* include some kind of library or header */
+    case 0:
+      if (record->event.pressed) {
+        SEND_STRING("#include <>");
+        return MACRO( T(LEFT), END);
+      }
+      break;
+    case 1:
+      if (record->event.pressed) {
+        SEND_STRING("git pull");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 2:
+      if (record->event.pressed){
+        SEND_STRING("git push");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 3:
+      if (record->event.pressed){
+        // layer_on(_CAPS);
+        // register_code(KC_CAPSLOCK);
+        // unregister_code(KC_CAPSLOCK);
+      }
+      break;
+    case 4:
+      if (record->event.pressed){
+        // layer_off(_CAPS);
+        // register_code(KC_CAPSLOCK);
+        // unregister_code(KC_CAPSLOCK);
+      }
+      break;
+  }
+  return MACRO_NONE;
+};
+ 
+
+void matrix_scan_user(void) {
+    uint8_t layer = biton32(layer_state);
+    
+    switch (layer) {
+      case _QWERTY:
+        set_led_green;
+        break;
+      case _MOUSE:
+        set_led_yellow;
+        break;
+      case _NUMPAD:
+        set_led_blue;
+        break;
+      case _SYMBOLS:
+        set_led_red;
+        break;
+      case _NAV:
+        set_led_magenta;
+        break;
+      case _MACROS:
+        set_led_green;
+        _delay_ms(45);
+        set_led_red;
+        _delay_ms(45);
+        break;
+      case _FUNCTION:
+        set_led_green;
+        _delay_ms(45);
+        set_led_blue;
+        _delay_ms(45);
+        break;  
+      default:
+        set_led_green;
+        break;
+    }
+};

keyboards/clueboard/60/boards/GENERIC_STM32_F303XC/board.h

@@ -416,7 +416,7 @@
                                      PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
                                      PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
                                      PIN_PUPDR_FLOATING(GPIOB_PIN6) |   \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |   \
+                                     PIN_PUPDR_PULLDOWN(GPIOB_PIN7) |   \
                                      PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
                                      PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
                                      PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
@@ -432,7 +432,7 @@
                                      PIN_ODR_HIGH(GPIOB_PIN4) |             \
                                      PIN_ODR_HIGH(GPIOB_PIN5) |             \
                                      PIN_ODR_HIGH(GPIOB_PIN6) |         \
-                                     PIN_ODR_HIGH(GPIOB_PIN7) |         \
+                                     PIN_ODR_LOW(GPIOB_PIN7) |         \
                                      PIN_ODR_HIGH(GPIOB_PIN8) |             \
                                      PIN_ODR_HIGH(GPIOB_PIN9) |             \
                                      PIN_ODR_HIGH(GPIOB_PIN10) |            \

keyboards/clueboard/60/matrix.c

@@ -11,7 +11,7 @@
 
 /* Clueboard 60%
  *
- * Column pins are input with internal pull-down. 
+ * Column pins are input with internal pull-down.
  * Row pins are output and strobe with high.
  * Key is high or 1 when it turns on.
  *
@@ -68,8 +68,8 @@ void matrix_init(void) {
     palSetPadMode(GPIOA, 15,  PAL_MODE_INPUT_PULLDOWN);
     palSetPadMode(GPIOA, 10,  PAL_MODE_INPUT_PULLDOWN);
 
-    memset(matrix, 0, MATRIX_ROWS);
-    memset(matrix_debouncing, 0, MATRIX_COLS);
+    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t));
 
     /* Setup capslock */
     // palSetPadMode(GPIOB, 7,  PAL_MODE_OUTPUT_PUSHPULL);
@@ -84,20 +84,20 @@ uint8_t matrix_scan(void) {
 
         // strobe col { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC14, PC15, PC13, PB5, PB6 }
         switch (col) {
-            case 0: palSetPad(GPIOA, 2); break; 
-            case 1: palSetPad(GPIOA, 3); break; 
-            case 2: palSetPad(GPIOA, 6); break; 
-            case 3: palSetPad(GPIOB, 14); break; 
-            case 4: palSetPad(GPIOB, 15); break; 
-            case 5: palSetPad(GPIOA, 8); break; 
-            case 6: palSetPad(GPIOA, 9); break; 
-            case 7: palSetPad(GPIOA, 7); break; 
-            case 8: palSetPad(GPIOB, 3); break; 
-            case 9: palSetPad(GPIOB, 4); break; 
-            case 10: palSetPad(GPIOC, 15); break; 
-            case 11: palSetPad(GPIOC, 14); break; 
-            case 12: palSetPad(GPIOC, 13); break; 
-            case 13: palSetPad(GPIOB, 5); break; 
+            case 0: palSetPad(GPIOA, 2); break;
+            case 1: palSetPad(GPIOA, 3); break;
+            case 2: palSetPad(GPIOA, 6); break;
+            case 3: palSetPad(GPIOB, 14); break;
+            case 4: palSetPad(GPIOB, 15); break;
+            case 5: palSetPad(GPIOA, 8); break;
+            case 6: palSetPad(GPIOA, 9); break;
+            case 7: palSetPad(GPIOA, 7); break;
+            case 8: palSetPad(GPIOB, 3); break;
+            case 9: palSetPad(GPIOB, 4); break;
+            case 10: palSetPad(GPIOC, 15); break;
+            case 11: palSetPad(GPIOC, 14); break;
+            case 12: palSetPad(GPIOC, 13); break;
+            case 13: palSetPad(GPIOB, 5); break;
             case 14: palSetPad(GPIOB, 6); break;
         }
 
@@ -115,20 +115,20 @@ uint8_t matrix_scan(void) {
 
         // unstrobe  col { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC15, PC14, PC13, PB5, PB6 }
         switch (col) {
-            case 0: palClearPad(GPIOA, 2); break; 
-            case 1: palClearPad(GPIOA, 3); break; 
-            case 2: palClearPad(GPIOA, 6); break; 
-            case 3: palClearPad(GPIOB, 14); break; 
-            case 4: palClearPad(GPIOB, 15); break; 
-            case 5: palClearPad(GPIOA, 8); break; 
-            case 6: palClearPad(GPIOA, 9); break; 
-            case 7: palClearPad(GPIOA, 7); break; 
-            case 8: palClearPad(GPIOB, 3); break; 
-            case 9: palClearPad(GPIOB, 4); break; 
-            case 10: palClearPad(GPIOC, 15); break; 
-            case 11: palClearPad(GPIOC, 14); break; 
-            case 12: palClearPad(GPIOC, 13); break; 
-            case 13: palClearPad(GPIOB, 5); break; 
+            case 0: palClearPad(GPIOA, 2); break;
+            case 1: palClearPad(GPIOA, 3); break;
+            case 2: palClearPad(GPIOA, 6); break;
+            case 3: palClearPad(GPIOB, 14); break;
+            case 4: palClearPad(GPIOB, 15); break;
+            case 5: palClearPad(GPIOA, 8); break;
+            case 6: palClearPad(GPIOA, 9); break;
+            case 7: palClearPad(GPIOA, 7); break;
+            case 8: palClearPad(GPIOB, 3); break;
+            case 9: palClearPad(GPIOB, 4); break;
+            case 10: palClearPad(GPIOC, 15); break;
+            case 11: palClearPad(GPIOC, 14); break;
+            case 12: palClearPad(GPIOC, 13); break;
+            case 13: palClearPad(GPIOB, 5); break;
             case 14: palClearPad(GPIOB, 6); break;
         }
 

keyboards/clueboard/66/keymaps/bloodlvst/Makefile

@@ -1,2 +0,0 @@
-EXTRAKEY_ENABLE = yes
-COMMAND_ENABLE  = no

keyboards/clueboard/66/keymaps/mrscooty/Makefile

@@ -1,4 +0,0 @@
-
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-

keyboards/clueboard/66/keymaps/serubin/Makefile

@@ -1,4 +0,0 @@
-
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-

keyboards/clueboard/66/keymaps/skully/rules.mk

@@ -1 +1,2 @@
+RGBLIGHT_ENABLE = no
 MOUSEKEY_ENABLE = yes

keyboards/clueboard/66/keymaps/tetris/Makefile

@@ -1 +0,0 @@
-SRC = tetris_text.c

keyboards/clueboard/66/keymaps/xyverz/Makefile

@@ -1,49 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Build Options
-#   change to "no" to disable the options, or define them in the makefile.mk in 
-#   the appropriate keymap folder that will get included automatically
-#
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/dz60/keymaps/iso_7u_space/keymap.c

@@ -4,7 +4,6 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-<<<<<<< HEAD
 /* ISO 7u layout layer 0
 * ,-----------------------------------------------------------------------------------------.
 * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  ß  |  ´  |   BSPC    |
@@ -19,8 +18,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * `-----------------------------------------------------------------------------------------'
 */
 
-=======
->>>>>>> dc7cc26dff01cc84b6f9f96af6d3aa03469aaca3
 	KEYMAP(
 		KC_ESC,   KC_1,       KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7, 	KC_8, 		KC_9,		KC_0, 		KC_MINS, KC_EQL, 	KC_NO, 	KC_BSPC,
 		KC_TAB,   KC_Q,       KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U, 	KC_I, 		KC_O,		KC_P, 		KC_LBRC, KC_RBRC, 	KC_BSLS,

keyboards/eagle_viper/eagle_viper.c

@@ -0,0 +1 @@
+#include "eagle_viper.h"

keyboards/eagle_viper/eagle_viper.h

@@ -0,0 +1,10 @@
+#ifndef EAGLE_VIPER_H
+#define EAGLE_VIPER_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_eagle_viper_v2
+    #include "v2.h"
+#endif
+
+#endif

keyboards/eagle_viper/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Eagle/Viper", 
+    "manufacturer": "Duck", 
+    "processor": "atmega32u4", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0.5, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":14, "y":1, "w":1.5}, {"x":0.75, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":14, "y":2, "w":2.25}, {"x":1.25, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":13, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0.25, "y":4, "w":1.25}, {"x":1.5, "y":4, "w":1.25}, {"x":2.75, "y":4, "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "w":1.25}, {"x":11.5, "y":4, "w":1.25}, {"x":12.75, "y":4, "w":1.25}, {"x":14, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/eagle_viper/readme.md

@@ -0,0 +1,12 @@
+# Duck Eagle/Viper
+
+Non official firmware for custom Korean keyboard with 60% key layout made by Duck.
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+Newest version is the [Eagle/Viper V2](http://duck0113.tistory.com/127)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make eagle_viper/v2:default
+

keyboards/eagle_viper/rules.mk

@@ -0,0 +1 @@
+DEFAULT_FOLDER = eagle_viper/v2

keyboards/eagle_viper/v2/config.h

@@ -0,0 +1,54 @@
+/*
+Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Duck
+#define PRODUCT         Eagle/Viper V2
+#define DESCRIPTION     60% Korean custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN D6
+#define RGBLED_NUM 17
+
+#define TAPPING_TERM 200
+
+#endif

keyboards/eagle_viper/v2/indicator_leds.c

@@ -0,0 +1,89 @@
+/*
+Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <stdbool.h>
+#include <util/delay.h>
+#include "indicator_leds.h"
+
+#define RES 6000
+
+#define LED_T1H	600
+#define LED_T1L 650
+#define LED_T0H 250
+#define LED_T0L 1000
+
+#define NS_PER_SEC (1000000000L)
+#define CYCLES_PER_SEC (F_CPU)
+#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
+#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
+
+void send_bit_d4(bool bitVal) {
+  if(bitVal) {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T1H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
+  } else {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T0H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
+  }
+}
+
+void show(void) {
+  _delay_us((RES / 1000UL) + 1);
+}
+
+void send_value(uint8_t byte) {
+  for(uint8_t b = 0; b < 8; b++) {
+    send_bit_d4(byte & 0b10000000);
+    byte <<= 1;
+  }
+}
+
+// Send the LED indicators to the WS2811S chips
+void indicator_leds_set(bool leds[8]) {
+  uint8_t led_cnt;
+
+  cli();
+  for(led_cnt = 0; led_cnt < 8; led_cnt++)
+    send_value(leds[led_cnt] ? 255 : 0);
+  sei();
+  show();
+}

keyboards/eagle_viper/v2/indicator_leds.h

@@ -0,0 +1,2 @@
+void indicator_leds_set(bool leds[8]);
+void show(void);

keyboards/eagle_viper/v2/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eagle_viper.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = KEYMAP(\
+        KC_GRV,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NO, KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_NO,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                  MO(1),   KC_NO,   KC_RALT, KC_RGUI, KC_RCTL),
+
+    [1] = KEYMAP(\
+        KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+        };
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};

keyboards/eagle_viper/v2/keymaps/default/readme.md

@@ -0,0 +1,10 @@
+# Default Eagle Layout
+
+This is the default implement layout for Duck Eagle V2.
+
+![Duck Eagle V2 Default Layout](https://imgur.com/mWBY3Dc.png)
+
+
+## Features
+
+* Default QWERTY layer

keyboards/eagle_viper/v2/keymaps/mechmerlin/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eagle_viper.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = KEYMAP(\
+        KC_GESC, KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NO, KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_NO,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                  MO(1),   KC_NO,   KC_RALT, KC_RGUI, KC_RCTL),
+
+    [1] = KEYMAP(\
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_DEL,
+        RGB_TOG, RGB_MOD, RGB_VAI, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS,
+        KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_PGDN, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                TG(2),                                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+    [2] = KEYMAP(\
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_NO,   KC_LEFT, KC_DOWN, KC_RIGHT),
+        };
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};

keyboards/eagle_viper/v2/keymaps/mechmerlin/readme.md

@@ -0,0 +1,15 @@
+MechMerlin's Duck Eagle V2 Layout
+======================
+
+This is the preferred 60% layout used by u/merlin36, host of the MechMerlin YouTube channel.
+
+![Duck Eagle V2 Layout](https://imgur.com/FRcsmJc.png)
+
+## Keymap Notes
+- Highly influenced by the KBP V60 and WKL B.Face standard layouts
+- Does not support any form of inswitch lighting as Merlin hates them.
+- Arrow toggle switch is FN + Space
+- Reset is FN + R
+
+### Build
+To build this keymap, simply run `make eagle_viper/v2:mechmerlin` from the qmk_firmware directory.

keyboards/eagle_viper/v2/keymaps/profanum429/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eagle_viper.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = KEYMAP(\
+        KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSPC,
+        KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_NO,            KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+        KC_NO,   KC_LGUI, KC_LALT,                KC_SPC,                                  KC_NO,   KC_NO,   KC_RALT, KC_RGUI, KC_NO),
+ 
+    [1] = KEYMAP(\
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,   KC_F12,  KC_INS, KC_DEL,
+        KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS,  KC_UP,    KC_TRNS, KC_BSPC,
+        KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT,  KC_RIGHT, KC_TRNS, KC_ENT,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN,  KC_DOWN,  KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+        };
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};
+
+
+

keyboards/eagle_viper/v2/keymaps/profanum429/readme.md

@@ -0,0 +1,5 @@
+# Profanum429 Duck Viper V2 Layout
+TODO
+
+## Features
+TODO

keyboards/eagle_viper/v2/matrix.c

@@ -0,0 +1,266 @@
+/*
+Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <util/delay.h>
+#include <avr/io.h>
+#include <stdio.h>
+#include "matrix.h"
+#include "util.h"
+#include "print.h"
+#include "debug.h"
+
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(uint8_t col);
+static void init_rows(void);
+static void unselect_cols(void);
+static void select_col(uint8_t col);
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void backlight_init_ports(void)
+{
+  DDRD  |=  0b11010000;
+  PORTD &= ~0b01010000;
+  PORTD |=  0b10000000;
+  DDRB  |=  0b00011111;
+  PORTB &= ~0b00001110;
+  PORTB |=  0b00010001;
+  DDRE  |=  0b01000000;
+  PORTE &= ~0b01000000;
+}
+
+void matrix_init(void) {
+  backlight_init_ports();
+  unselect_cols();
+  init_rows();
+
+  for (uint8_t i=0; i < MATRIX_ROWS; i++)  {
+    matrix[i] = 0;
+    matrix_debouncing[i] = 0;
+  }
+
+  matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+  for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+    select_col(col);
+    _delay_us(3);
+
+    uint8_t rows = read_rows(col);
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+      bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+      bool curr_bit = rows & (1<<row);
+      if (prev_bit != curr_bit) {
+        matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+        debouncing = DEBOUNCING_DELAY;
+      }
+    }
+    unselect_cols();
+  }
+
+  if (debouncing) {
+    if (--debouncing) {
+      _delay_ms(1);
+    } else {
+      for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        matrix[i] = matrix_debouncing[i];
+      }
+    }
+  }
+
+  matrix_scan_quantum();
+  return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+  return matrix[row];
+}
+
+void matrix_print(void) {
+  print("\nr/c 0123456789ABCDEF\n");
+  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+    xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+  }
+}
+
+/* Row pin configuration
+ * row: 0    1    2    3    4    5
+ * pin: PB7  PD0  PD1  PD2  PD3  PD5
+ *
+ * Esc uses its own pin PE2
+ */
+static void init_rows(void) {
+    DDRD  &= ~0b00101111;
+    PORTD &= ~0b00101111;
+
+    DDRB  &= ~0b10000000;
+    PORTB &= ~0b10000000;
+
+    DDRE  &= ~0b00000100;
+    PORTE |=  0b00000100;
+}
+
+static uint8_t read_rows(uint8_t col) {
+
+    return (PIND&(1<<0) ? (1<<0) : 0) |
+            (PIND&(1<<1) ? (1<<1) : 0) |
+            (PIND&(1<<2) ? (1<<2) : 0) |
+            (PIND&(1<<3) ? (1<<3) : 0) |
+            (PIND&(1<<5) ? (1<<4) : 0) |
+            (PINB&(1<<7) ? (1<<5) : 0) |
+            (col==0 ? ((PINE&(1<<2) ? 0 : (1<<2))) : 0);
+    
+}
+
+uint8_t read_fwkey(void)
+{
+  return PINE&(1<<2) ? 0 : (1<<2);
+}
+
+/* Columns 0 - 15
+ * These columns uses two 74HC237D 3 to 8 bit demultiplexers.
+ * col / pin:    PC6  PB6  PF0  PF1  PC7
+ * 0:             1    0    0    0    0
+ * 1:             1    0    1    0    0
+ * 2:             1    0    0    1    0
+ * 3:             1    0    1    1    0
+ * 4:             1    0    0    0    1
+ * 5:             1    0    1    0    1
+ * 6:             1    0    0    1    1
+ * 7:             1    0    1    1    1
+ * 8:             0    1    0    0    0
+ * 9:             0    1    1    0    0
+ * 10:            0    1    0    1    0
+ * 11:            0    1    1    1    0
+ * 12:            0    1    0    0    1
+ * 13:            0    1    1    0    1
+ * 14:            0    1    0    1    1
+ * 15:            0    1    1    1    1
+ *
+ */
+static void unselect_cols(void) {
+  DDRB  |=  0b01000000;
+  PORTB &= ~0b01000000;
+
+  DDRC  |=  0b11000000;
+  PORTC &= ~0b11000000;
+
+  DDRF  |=  0b00000011;
+  PORTF &= ~0b00000011;
+}
+
+static void select_col(uint8_t col) {
+ 
+   switch (col) {
+        case 0:
+            PORTC |= 0b01000000;
+            break;
+        case 1:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 2:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 3:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 4:
+            PORTC |= 0b11000000;
+            break;
+        case 5:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000001;
+            break;
+        case 6:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000010;
+            break;
+        case 7:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000011;
+            break;
+        case 8:
+            PORTB |= 0b01000000;
+            break;
+        case 9:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 10:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 11:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 12:
+            PORTB |= 0b01000000;
+            PORTC |= 0b10000000;
+            break;
+        case 13:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000001;
+            PORTC |= 0b10000000;
+            break;
+        case 14:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000010;
+            PORTC |= 0b10000000;
+            break;
+        case 15:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000011;
+            PORTC |= 0b10000000;
+            break;
+    }
+}

keyboards/eagle_viper/v2/readme.md

@@ -0,0 +1,30 @@
+# Duck Eagle/Viper V2
+
+Non official firmware for custom Korean keyboard with 60% key layout made by Duck.  
+Group buy was run November 2016 via [geekhack](https://geekhack.org/index.php?topic=86087.0) with 100 keyboards total. 
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Duck Eagle/Viper PCB Ver 2.0, Atmega32u4  
+Hardware Availability: Wait until GB of the next revision
+
+Make example for this keyboard (after setting up your build environment):
+
+    make eagle_viper/v2:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Hardware Notes
+
+The Duck Eagle/Viper V2 PCB consists of:
+
+### Microchips
+2 74HC237D 3-to-8 line decoders
+1 Atmega32u4 microcontroller
+2 WS2811 LED controller
+
+## Notes
+Thanks to Ralf Schmitt for previous implementations in his [TMK fork](https://github.com/xauser/tmk_keyboard/tree/xauser/) and few helping words.
+
+Based heavily on Rasmus Schults [Duck Lightsaver QMK Port](https://github.com/qmk/qmk_firmware/tree/master/keyboards/lightsaver)
+
+Special thanks to profanum429 for debugging help and contributions to support the Viper and LED indicators. 

keyboards/eagle_viper/v2/rules.mk

@@ -0,0 +1,72 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = yes
+
+CUSTOM_MATRIX = yes
+SRC += indicator_leds.c \
+			 matrix.c

keyboards/eagle_viper/v2/v2.c

@@ -0,0 +1,65 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "v2.h"
+#include "indicator_leds.h"
+
+enum BACKLIGHT_AREAS {
+  BACKLIGHT_ALPHAS   = 0b00000010,
+  BACKLIGHT_MODNUM   = 0b00001000
+};
+
+void backlight_set(uint8_t level) {
+  switch(level) {
+  case 0:
+    PORTB |= BACKLIGHT_ALPHAS;
+    PORTB |= BACKLIGHT_MODNUM;
+  break;
+  case 1:
+    PORTB &= ~BACKLIGHT_ALPHAS;
+    PORTB |= BACKLIGHT_MODNUM;
+  break;
+  case 2:
+    PORTB |= BACKLIGHT_ALPHAS;
+    PORTB &= ~BACKLIGHT_MODNUM;
+  break;
+  case 3:
+    PORTB &= ~BACKLIGHT_ALPHAS;
+    PORTB &= ~BACKLIGHT_MODNUM;
+  break;
+  }
+}
+
+// Port from backlight_update_state
+void led_set_kb(uint8_t usb_led) {
+    bool status[8] = {
+    host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK), /* LED 3 */
+    host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK),   /* LED 2 */
+    host_keyboard_leds() & (1<<USB_LED_NUM_LOCK),    /* LED 1 */
+
+    layer_state & (1<<2),                            /* LED 6 */
+    layer_state & (1<<1),                            /* LED 5 */
+    layer_state & (1<<0) ? 0: 1,                     /* LED 4 */
+
+    layer_state & (1<<5),                            /* LED 8 */
+    layer_state & (1<<4)                             /* LED 7 */
+  };
+
+  indicator_leds_set(status);
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  return process_record_user(keycode, record);
+}

keyboards/eagle_viper/v2/v2.h

@@ -0,0 +1,34 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef V2_H
+#define V2_H
+
+#include "../eagle_viper.h"
+
+#define KEYMAP( \
+    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, \
+    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M,      K3O, \
+    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M,      K2O, \
+    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K,      K1M, K1N, K1O, \
+    K0A, K0B, K0C,                               K0J, K0K, K0L, K0M, K0N, K0O \
+) { \
+  { K4A, K4B, K4C, K4D,   K4E,   K4F,   K4G,   K4H,   K4I,   K4J,   K4K, K4L,   K4M, K4N,   K4O,   }, \
+  { K3A, K3B, K3C, K3D,   K3E,   K3F,   K3G,   K3H,   K3I,   K3J,   K3K, K3L,   K3M, KC_NO, K3O,   }, \
+  { K2A, K2B, K2C, K2D,   K2E,   K2F,   K2G,   K2H,   K2I,   K2J,   K2K, K2L,   K2M, KC_NO, K2O,   }, \
+  { K1A, K1B, K1C, K1D,   K1E,   K1F,   K1G,   K1H,   K1I,   K1J,   K1K, KC_NO, K1M, K1N,   K1O,   }, \
+  { K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J,   KC_NO, K0K, K0L,   K0M, K0N,   K0O    }  \
+}
+#endif

keyboards/ergodone/ergodone.c

@@ -12,6 +12,8 @@ extern inline void ergodox_right_led_2_off(void);
 extern inline void ergodox_right_led_3_off(void);
 extern inline void ergodox_right_led_off(uint8_t led);
 
+extern inline void ergodox_led_all_off(void);
+
 void ergodox_led_init(void);
 void ergodox_blink_all_leds(void);
 

keyboards/ergodox_ez/keymaps/drashna/config.h

@@ -1,9 +1,8 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
-#include "../../config.h"
 
+#include QMK_KEYBOARD_CONFIG_H
 
-#define TAPPING_TERM 200
 
 #ifdef RGBLIGHT_ENABLE
 #undef RGBLIGHT_SAT_STEP 
@@ -13,6 +12,12 @@
 #define RGBLIGHT_EFFECT_BREATHE_CENTER 1
 #endif // RGBLIGHT_ENABLE
 
-#define FORCE_NKRO
+#ifdef TAPPING_TERM
+#undef TAPPING_TERM
+#endif
+#define TAPPING_TERM 150
+#undef PERMISSIVE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
+#define ONESHOT_TAP_TOGGLE 2
 
 #endif

keyboards/ergodox_ez/keymaps/drashna/keymap.c

@@ -15,15 +15,8 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
-#include "debug.h"
-#include "action_layer.h"
-#include "version.h"
 #include "drashna.h"
 
-#include "keymap_german.h"
-
-#include "keymap_nordic.h"
-
 
 
 
@@ -31,18 +24,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 bool skip_leds = false;
 
 
-#ifdef TAP_DANCE_ENABLE
-#define KC_D3_1 TD(TD_D3_1)
-#define KC_D3_2 TD(TD_D3_2)
-#define KC_D3_3 TD(TD_D3_3)
-#define KC_D3_4 TD(TD_D3_4)
-#else
-#define KC_D3_1 KC_1
-#define KC_D3_2 KC_2
-#define KC_D3_3 KC_3
-#define KC_D3_4 KC_4
-#endif
-
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Keymap 0: Basic layer
@@ -71,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                 KC_EQUAL,       KC_1,       KC_2,       KC_3,       KC_4,       KC_5,       TG(_MOUS),
                 KC_TAB,         KC_Q,       KC_W,       KC_E,       KC_R,       KC_T,       TG(_DIABLO),
                 KC_BSPACE,      KC_A,       KC_S,       KC_D,       KC_F,       KC_G,
-                KC_LSHIFT,      LCTL_T(KC_Z),KC_X,       KC_C,       KC_V,       KC_B,       TG(_GAMEPAD),
+                OSM(MOD_LSFT),      LCTL_T(KC_Z),KC_X,       KC_C,       KC_V,       KC_B,       TG(_GAMEPAD),
                 LT(_SYMB,KC_GRAVE),KC_QUOTE, KC_LGUI,    KC_LBRACKET,KC_RBRACKET,
                 
                                     ALT_T(KC_APPLICATION),  KC_LGUI,
@@ -81,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                 TG(_MOUS),       KC_6,       KC_7,       KC_8,       KC_9,       KC_0,           KC_MINUS,
                 TG(_DIABLO),     KC_Y,       KC_U,       KC_I,       KC_O,       KC_P,           KC_BSLASH,
                                 KC_H,       KC_J,       KC_K,       KC_L,       KC_SCOLON,      GUI_T(KC_QUOTE),
-                TG(_GAMEPAD),  KC_N,       KC_M,       KC_COMMA,   KC_DOT,     RCTL_T(KC_SLASH),KC_RSHIFT,
+                TG(_GAMEPAD),  KC_N,       KC_M,       KC_COMMA,   KC_DOT,     RCTL_T(KC_SLASH),OSM(MOD_RSFT),
                                             KC_LEFT,    KC_DOWN,    KC_UP,      KC_RIGHT,       TT(_SYMB),
                 KC_RGUI,    CTL_T(KC_ESCAPE),
                 KC_PGUP,
@@ -115,7 +96,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   TG(_MOUS),
         KC_TAB,         KC_Q,         KC_W,   KC_F,   KC_P,   KC_G,   TG(_DIABLO),
         KC_BSPC,        KC_A,         KC_R,   KC_S,   KC_T,   KC_D,
-        KC_LSFT,        LCTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   TG(_GAMEPAD),
+        OSM(MOD_LSFT),        LCTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   TG(_GAMEPAD),
         LT(_SYMB,KC_GRV),KC_QUOT,      KC_LGUI,    KC_LBRACKET,KC_RBRACKET,
                                               ALT_T(KC_APP),  KC_LGUI,
                                                               KC_HOME,
@@ -124,7 +105,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
              TG(_MOUS),    KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
              TG(_DIABLO),  KC_J,   KC_L,   KC_U,   KC_Y,   KC_SCLN,          KC_BSLS,
                           KC_H,   KC_N,   KC_E,   KC_I,   KC_O,             GUI_T(KC_QUOTE),
-             TG(_GAMEPAD),KC_K,  KC_M,   KC_COMM,KC_DOT, RCTL_T(KC_SLASH), KC_RSHIFT,
+             TG(_GAMEPAD),KC_K,  KC_M,   KC_COMM,KC_DOT, RCTL_T(KC_SLASH), OSM(MOD_RSFT),
                           KC_LEFT,    KC_DOWN,    KC_UP,      KC_RIGHT,       TT(_SYMB),
              KC_RGUI,        CTL_T(KC_ESC),
              KC_PGUP,
@@ -156,9 +137,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_DVORAK] = LAYOUT_ergodox(  
         // left hand
         KC_EQL,         KC_1,           KC_2,    KC_3,   KC_4,   KC_5,   TG(_MOUS),
-        KC_TAB,        KC_QUOT,        KC_COMM, KC_DOT, KC_P,   KC_Y,   TG(_DIABLO),
+        KC_TAB,         KC_QUOT,        KC_COMM, KC_DOT, KC_P,   KC_Y,   TG(_DIABLO),
         KC_BSPC,        KC_A,           KC_O,    KC_E,   KC_U,   KC_I,
-        KC_LSFT,        LCTL_T(KC_SCLN), KC_Q,    KC_J,   KC_K,   KC_X,   TG(_GAMEPAD),
+        OSM(MOD_LSFT),  LCTL_T(KC_SCLN), KC_Q,    KC_J,   KC_K,   KC_X,   TG(_GAMEPAD),
         LT(_SYMB,KC_GRV),KC_QUOT, KC_LGUI, KC_LBRACKET, KC_RBRACKET,
                                               ALT_T(KC_APP),  KC_LEAD,
                                                               KC_HOME,
@@ -167,7 +148,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
              TG(_MOUS),     KC_6,   KC_7,   KC_8,   KC_9,   KC_0,        KC_BSLS,
              TG(_DIABLO),   KC_F,   KC_G,   KC_C,   KC_R,   KC_L,        KC_SLSH,
                            KC_D,   KC_H,   KC_T,   KC_N,   KC_S,        KC_MINS,
-             TG(_GAMEPAD),KC_B,   KC_M,   KC_W,   KC_V,   RCTL_T(KC_Z), KC_RSHIFT,
+             TG(_GAMEPAD),KC_B,   KC_M,   KC_W,   KC_V,   RCTL_T(KC_Z), OSM(MOD_RSFT),
                                    KC_LEFT,KC_DOWN,KC_UP,  KC_RIGHT,    TT(_SYMB),
              KC_LALT,        CTL_T(KC_ESC),
              KC_PGUP,
@@ -178,11 +159,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,--------------------------------------------------.           ,--------------------------------------------------.
  * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Del    |   Q  |   W  |   F  |   P  |   G  |  L1  |           |  L1  |   J  |   L  |   U  |   Y  |   ;  |   \    |
+ * | Del    |   Q  |   D  |   R  |   W  |   B  |  L1  |           |  L1  |   J  |   F  |   U  |   P  |   ;  |   \    |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | BkSp   |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |O / L2|   '    |
+ * | BkSp   |   A  |   S  |   H  |   T  |   D  |------|           |------|   Y  |   N  |   E  |   O  |   I  |   '    |
  * |--------+------+------+------+------+------| OVER |           | Meh  |------+------+------+------+------+--------|
- * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * | LShift |Z/Ctrl|   X  |   M  |   C  |   V  |      |           |      |   K  |   L  |   ,  |   .  |//Ctrl| RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
  *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
  *   `----------------------------------'                                       `----------------------------------'
@@ -201,7 +182,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   TG(_MOUS),
         KC_TAB,         KC_Q,         KC_D,   KC_R,   KC_W,   KC_B,   TG(_DIABLO),
         KC_BSPC,        KC_A,         KC_S,   KC_H,   KC_T,   KC_G,
-        KC_LSFT,        LCTL_T(KC_Z),  KC_X,   KC_M,   KC_C,   KC_V,   TG(_GAMEPAD),
+        OSM(MOD_LSFT),        LCTL_T(KC_Z),  KC_X,   KC_M,   KC_C,   KC_V,   TG(_GAMEPAD),
         LT(_SYMB,KC_GRV),KC_QUOT,      KC_LGUI,    KC_LBRACKET,KC_RBRACKET,
                                               ALT_T(KC_APP),  KC_LEAD,
                                                               KC_HOME,
@@ -210,7 +191,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
              TG(_MOUS),    KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
              TG(_DIABLO),  KC_J,   KC_F,   KC_U,   KC_P,   KC_SCLN,          KC_BSLS,
                           KC_Y,   KC_N,   KC_E,   KC_O,   KC_I,             KC_QUOTE,
-             TG(_GAMEPAD),KC_K,  KC_L,   KC_COMM,KC_DOT, RCTL_T(KC_SLASH), KC_RSHIFT,
+             TG(_GAMEPAD),KC_K,  KC_L,   KC_COMM,KC_DOT, RCTL_T(KC_SLASH), OSM(MOD_RSFT),
                           KC_LEFT,    KC_DOWN,    KC_UP,      KC_RIGHT,       TT(_SYMB),
              KC_LALT,        CTL_T(KC_ESC),
              KC_PGUP,
@@ -239,7 +220,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 *                                 `--------------------'       `--------------------'
 */
   [_SYMB] = LAYOUT_ergodox(
-                KC_ESCAPE,      KC_F1,      KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_WORKMAN,
+                EPRM,      KC_F1,      KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_WORKMAN,
                 VRSN,           KC_EXLM,    KC_AT,      KC_LCBR,    KC_RCBR,    KC_PIPE,    KC_DVORAK,
                 KC_MAKE,        KC_HASH,    KC_DLR,     KC_LPRN,    KC_RPRN,    KC_GRAVE,
                 KC_RESET,       KC_PERC,    KC_CIRC,    KC_LBRACKET,KC_RBRACKET,KC_TILD,    KC_COLEMAK,
@@ -280,7 +261,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  */
   [_GAMEPAD] = LAYOUT_ergodox(
-                KC_ESCAPE,      KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,
+                KC_ESCAPE,      KC_TRNS,    KC_TRNS,    KC_TRNS,    HYPR(KC_D), HYPR(KC_Q), HYPR(KC_GRV),
                 KC_F1,          KC_K,       KC_Q,       KC_W,       KC_E,       KC_R,       KC_T,
                 KC_TAB,         KC_G,       KC_A,       KC_S,       KC_D,       KC_F,
                 KC_LCTL,        KC_LSHIFT,  KC_Z,       KC_X,       KC_C,       KC_V,       KC_TRNS,
@@ -294,7 +275,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                 KC_I,       KC_O,       KC_NO,      KC_NO,      KC_NO,      KC_NO,
                 TG(_GAMEPAD),   KC_N,       KC_M,       KC_NO,      KC_NO,      KC_NO,      KC_NO,
                                             KC_LEFT,    KC_DOWN,    KC_UP,      KC_RIGHT,      KC_NO,
-                KC_NO,          KC_NO,
+                KC_HYPR,         MAGIC_TOGGLE_NKRO,
                 KC_NO,
                 KC_PGDOWN,      KC_DELETE, KC_ENTER
             ),
@@ -364,7 +345,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  */
   [_MOUS] = LAYOUT_ergodox(
-                KC_NO,      KC_NO,      KC_NO,      KC_NO,      KC_NO,      KC_NO,      KC_TRNS,
+                KC_NO,      KC_SECRET_1,KC_SECRET_2,KC_SECRET_3,KC_SECRET_4,KC_SECRET_5,KC_TRNS,
                 KC_NO,      KC_NO,      KC_MS_U,    KC_NO,      KC_NO,      KC_NO,      KC_TRNS,
                 KC_NO,      KC_MS_L,    KC_MS_D,    KC_MS_R,    KC_NO,      KC_NO,
                 KC_NO,      KC_ACL0,    KC_ACL1,    KC_ACL2,    KC_NO,      KC_NO,      KC_TRNS,

keyboards/ergodox_ez/keymaps/drashna/rules.mk

@@ -4,8 +4,3 @@ COMMAND_ENABLE    = no  # Commands for debug and configuration
 RGBLIGHT_ENABLE   = yes
 CONSOLE_ENABLE    = no
 
-EXTRAFLAGS        = -flto
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/ergodox_infinity/keymaps/gordon/keymap.c

@@ -0,0 +1,315 @@
+#include QMK_KEYBOARD_H
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+#include "process_keycode/process_tap_dance.h"
+#include "gordon.h"
+
+#include "keymap_german.h"
+
+#include "keymap_nordic.h"
+
+
+#define TLSLSH   M(TIL_SLASH)
+#define F1_F13   TD(F1F13)
+#define F2_F14   TD(F2F14)
+#define F5_F15   TD(F5F15)
+#define F4_ALTF4 TD(ALTF4)
+#define END_ESC  TD(ENDESC)
+#define SHF6_AF7 TD(F6F7)
+#define F12_RUN  TD(F12ETAPS)
+#define COMMA_TD TD(COMMA)
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD,
+};
+
+//Tap dance enums
+enum {
+  F12TAP = 0,
+  F12ETAPS,
+  CALCCOMP,
+  REFRESH, //send R, or Control+R if double tapped.
+  ENDESC,
+  XESC, //'quad function'. x, control, escape, alt
+  ALY2, //'quad function': a, Hyper, ctrl+a, layer 2
+  PRLOCK,
+  F6F7, // Shift F6 or Alt F7
+  TABCOMBO,
+  FCTRL,
+  F3D,
+  ALTF4,
+  COMMA,
+  AT,
+  HTAB,
+  F1F13,
+  F2F14,
+  F5F15
+};
+
+
+
+// Custom tapping terms for each key.
+// Requires changes to action_taping.c
+/* uint16_t get_tapping_term(keyevent_t* event) {
+    uint16_t keycode = keymap_key_to_keycode(layer_switch_get_layer(event->key), event->key);
+    if (keycode == LT(3,KC_E) ) {
+        return TAPPING_TERM + 50;
+    }
+    return TAPPING_TERM;
+} */
+
+            
+// Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  // simple tap dance
+  [F12ETAPS] = ACTION_TAP_DANCE_DOUBLE(KC_F12,LSFT(LCTL(KC_F10))),  
+  [REFRESH] = ACTION_TAP_DANCE_DOUBLE(KC_R,LCTL(KC_R)),
+  [ENDESC] = ACTION_TAP_DANCE_DOUBLE(KC_END, KC_ESC),
+  [CALCCOMP] = ACTION_TAP_DANCE_DOUBLE(KC_CALCULATOR, KC_MY_COMPUTER),
+  [ALTF4] = ACTION_TAP_DANCE_DOUBLE(KC_F4,LALT(KC_F4)),
+  [F6F7] = ACTION_TAP_DANCE_DOUBLE(LSFT(KC_F6), LALT(KC_F7)),
+  [F1F13] = ACTION_TAP_DANCE_DOUBLE(KC_F1, KC_F13),
+  [F2F14] = ACTION_TAP_DANCE_DOUBLE(KC_F2, KC_F14),
+  [F5F15] = ACTION_TAP_DANCE_DOUBLE(KC_F5, KC_F15),
+  [TABCOMBO] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, tab_finished, tab_reset),
+  [F3D] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, bt_finished, bt_reset),
+  [COMMA] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, comma_finished, comma_reset),
+  [HTAB] = ACTION_TAP_DANCE_FN_ADVANCED(NULL,h_finished, h_reset)
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+//**************************FIRST LAYER - LAYER ZERO ************************************** 
+  [_QWERTY] = KEYMAP(
+
+    SHF6_AF7,   F1_F13,    F2_F14,   TD(F3D), F4_ALTF4,    F5_F15,   KC_F11,
+    ________,     KC_Q,  CTR_SH_W,     NAV_E, CTR_AL_R,      KC_T, PRINTSCR,
+      KC_TAB,     KC_A,     MEH_S,  NUMPAD_D,   CTRL_F,     WIN_G,
+    ALT_SHFT,   CTRL_Z,   HYPER_X,   MOUSE_C,    ALT_V,      KC_B, TT(_MOUSE),
+    KC_MINUS, KC_GRAVE, KC_DELETE,   KC_LEFT, KC_RIGHT,
+                                    
+                                              KC_INSERT,  KC_DELETE, 
+                                                           ALT_HOME,
+                                    KC_LSHIFT, SYMB_BSP,    END_ESC,
+
+                 F12_RUN,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10, TD(CALCCOMP),
+                ________,     KC_Y,     KC_U,     KC_I,     KC_O,      KC_P,  ________,
+                             WIN_H,   CTRL_J,     KC_K,    MEH_L,  COL_MOUS,  ________,
+                 KC_LEAD,     KC_N,    ALT_M, COMMA_TD, HYPE_DOT,  KC_SLASH, TD(TABCOMBO),
+                                       KC_UP,  KC_DOWN,   KC_ESC,    KC_TILD,    KC_UNDS,
+
+  KC_ESCAPE,  KC_DELETE,
+         ALT_T(KC_PGUP),
+  RCTL_T(KC_PGDOWN), LT(_NAV,KC_ENTER), SPAC_SYM),
+
+
+  //**************************SYMBOLS LAYER**************************
+  [_SYMBOLS] = KEYMAP(
+    ________, ________, ________, ________, ________, ________,  ________,
+    ________,   TLSLSH,    KC_AT,  KC_LCBR,  KC_RCBR,  KC_CIRC,  ________,
+    ________,  KC_EXLM,  KC_PIPE,  KC_LPRN,  KC_RPRN, M(DEREF),
+    ________,KC_DOLLAR,  KC_PERC, LSQUIGLY, RSQUIGLY, ________,  ________,
+    ________,  M(TICK3),  ________,  ________,  ________,  
+
+                                    ________,________,
+                                             ________,
+                           ________,________,________,
+
+
+                  ________, ________, ________, ________, ________, ________, NUMLOCK,
+                  ________,   TLSLSH,  KC_PIPE,  KC_PLUS,  KC_AMPR, ________, CAPLOCK,
+                          M(EQRIGHT),  KC_DQUO, KC_EQUAL, KC_QUOTE,KC_SCOLON, ________,
+                  ________,  KC_PIPE, BK_SLASH,  ASTERSK,   KC_DOT, KC_SLASH, ________,
+                  ________,________,________,M(TILD3),________,
+                                                              ________,________,
+                                                                       ________,
+                                                     ________,________,________),
+  
+  //**************************MOUSE MOVEMENT LAYER**************************
+  [_MOUSE] = KEYMAP(RESET,________,________,________,________,________,________,
+                    RESET,________,________,KC_MS_UP,________,KC_MS_WH_UP,CALTDEL,
+                    ________,________,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,KC_MS_WH_DOWN,
+                    KC_SECRET_1,________,HYPR(KC_F13),________,HYPR(KC_F14),KC_SECRET_2,________,
+                    ________,________,HYPR(KC_F15),KC_MS_WH_LEFT,KC_MS_WH_RIGHT,
+                    
+                                                       ________,________,
+                                                                ________,
+                                          KC_MS_BTN1,KC_MS_BTN2,________,
+                                          
+                                         
+                    ________,________,________,________,________,________,________,
+                    KC_MS_WH_UP,________,________,KC_UP,________,________,________,
+                    ________,KC_LEFT,KC_DOWN,KC_RIGHT,________,________,
+                    KC_MS_WH_DOWN,________,KC_PGUP,KC_PGDOWN,KC_MEDIA_NEXT_TRACK,________,________,
+                    KC_AUDIO_VOL_UP,KC_AUDIO_VOL_DOWN,KC_AUDIO_MUTE,KC_MEDIA_PLAY_PAUSE,________,
+                    ________,________,
+                    ________,
+                    ________,________,KC_WWW_BACK),
+
+
+
+
+  //**************************WINDOWS NAVIGATION LAYER**************************
+
+  [_NAV] = KEYMAP(________,________,________,________,________,________,________,
+                  ________,________,SNAPLEFT,________,SNAPRGHT,LALT(KC_LEFT),________,
+                  ________,LCTL(KC_W),PREVTAB,LGUI(KC_D),NEXTTAB,________,
+                  ________,________,WORKLEFT,________,WORKRIGHT,________,________,
+                  ________,________,________,________,________,
+                  
+                  ________,________,
+                           ________,
+         ________,________,________, 
+         
+         
+         ________,________,________,________,________,________,________,
+         ________,________,SNAPUP  ,KC_UP   ,SNAPDOWN,________,________,
+                  ________,KC_LEFT ,KC_DOWN ,KC_RIGHT,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,
+         
+         
+         ________,________,
+         ________,
+         ________,________,________),
+
+  //****************************NUMPAD LAYER****************************
+  [_NUMPAD] = KEYMAP(________,________,________,________,________,________,________,
+                     ________,________,________,________,________,________,________,
+                     ________,________,________,________,________,________,
+                     ________,________,________,________,________,________,________,
+                     ________,________,________,________,________,
+                     
+                     ________,________,
+                     ________,
+                     ________,________,________,
+                     
+                     BL_TOGG ,BL_STEP ,________,________,________,________,________,
+                     ________,________,KC_7    ,KC_8    ,KC_9    ,________,________,
+                              ________,KC_4    ,KC_5    ,KC_6    ,________,________,
+                     ________,________,KC_1    ,KC_2    ,KC_3    ,________,________,
+                                       KC_0    ,KC_0 ,  KC_DOT   ,________,________,
+                                       
+                                       ________,________,
+                                       ________,
+                                       ________,________,KC_0),
+  //****************************TEXT/INTELLIJ NAVIGATION LAYER****************************
+  [_TEXTNAV] = KEYMAP(________,________,________,________,________,________,________,
+                      ________,MEH(KC_Q),LSFT(KC_ESCAPE),MEH(KC_D),MEH(KC_2),LALT(LSFT(KC_UP)),________,
+                      ________,LALT(KC_F7),LCTL(KC_LEFT),LCTL(KC_B),LCTL(KC_RIGHT),LALT(LSFT(KC_DOWN)),
+                      ________,________,________,LCTL(LSFT(KC_COMMA)),MEH(KC_DOT),LALT(KC_MS_WH_UP),________,________,________,________,________,________,________,________,________,________,LCTL(KC_DELETE),________,LALT(LSFT(KC_F9)),________,________,________,________,________,________,________,MEH(KC_5),LALT(LSFT(KC_Z)),________,LALT(KC_Z),________,________,________,LCTL(LSFT(KC_LEFT)),LALT(LCTL(KC_S)),LCTL(LSFT(KC_RIGHT)),LCTL(LSFT(KC_COMMA)),________,________,________,________,________,________,________,________,________,________,________,________,________,________,________,________,________,________,________)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [1] = ACTION_LAYER_TAP_TOGGLE(1)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case INFOQM: {
+          if (record->event.pressed) {
+            SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+          }
+          break;
+        }
+
+        case TIL_SLASH: {
+          if (record->event.pressed) {
+            SEND_STRING ("~/.");
+          }
+          break;
+        }
+
+        case DEREF: {
+          if (record->event.pressed) {
+            SEND_STRING ("->");
+          }
+          break;
+        }
+        
+        case EQRIGHT: {
+          if (record->event.pressed) {
+            SEND_STRING ("=>");
+          }
+          break;
+        }
+
+        case TICK3: {
+          if (record->event.pressed) {
+            SEND_STRING ("```");
+          }
+          break;
+        }
+
+        case TILD3: {
+          if (record->event.pressed) {
+            SEND_STRING ("~~~");
+          }
+          break;
+        }
+
+        case ALTTAB_START: {
+          register_code(KC_LALT);
+          layer_on(8);
+        }
+
+        case ALTTAB_END: {
+          unregister_code(KC_LALT);
+          layer_off(8);
+        }
+
+
+
+      }
+      return MACRO_NONE;
+};
+
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_on();
+    ergodox_led_all_on();
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+        case _SYMBOLS:
+            ergodox_right_led_1_on();
+            break;
+        case _MOUSE:
+            ergodox_right_led_2_on();
+            break;
+        case _NUMPAD:
+            ergodox_right_led_3_on();
+            break;
+        case _NAV:
+            ergodox_right_led_1_on();
+            ergodox_right_led_2_on();
+            break;
+        case 5:
+            ergodox_right_led_1_on();
+            ergodox_right_led_3_on();
+            break;
+        case 6:
+            ergodox_right_led_2_on();
+            ergodox_right_led_3_on();
+            break;
+        case 7:
+            ergodox_right_led_1_on();
+            ergodox_right_led_2_on();
+            ergodox_right_led_3_on();
+            break;
+        default:
+            break;
+    }
+
+};

keyboards/ergodox_infinity/keymaps/halfkeyboard/keymap.c

@@ -0,0 +1,356 @@
+#include QMK_KEYBOARD_H
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define QWERTY 0 // qwerty layer 
+#define HALFQWERTY 1 // mirrored qwerty layer 
+#define DVORAK 2 // dvorak layer 
+#define HALFDVORAK 3 // mirrored dvorak layer 
+#define SYMB 5 // symbols
+#define MDIA 6 // media keys
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: qwerty
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |  ESC   |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |  BSPC  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | TAB    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |ENTER   |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[QWERTY] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
+        KC_TAB,         KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LSFT,        KC_Z,  		  KC_X,   KC_C,   KC_V,   KC_B,   BL_ON,
+        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
+                                              KC_LALT,  TG(DVORAK),
+                                                              KC_HOME,
+                                         LT(HALFQWERTY, KC_SPACE),KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
+             TG(SYMB),    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,  KC_K,   KC_L,   KC_SCLN,		   KC_ENT,
+             MEH_T(KC_NO),KC_N,   KC_M,  KC_COMM,KC_DOT, KC_SLASH,   	   KC_RSFT,
+                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+             TG(DVORAK),        KC_RALT,
+             KC_PGUP,
+             KC_PGDN,KC_TAB, LT(HALFQWERTY, KC_ENT)
+    ),
+/* Keymap 1: mirrored qwerty
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |  BSPC  |   0  |   9  |   8  |   7  |   6  | LEFT |           | RIGHT|   5  |   4  |   3  |   2  |   1  |  ESC  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |  \     |   P  |   O  |   I  |   U  |   Y  |  L1  |           |  L1  |   T  |   R  |   E  |   W  |   Q  |   TAB  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | ENTER  |   ;  |   L  |   K  |   J  |   H  |------|           |------|   G  |   F  |   D  |   S  |   A  | BSPC   |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |   /  |   .  |   ,  |   M  |   N  |      |           |      |   B  |   V  |   C  |   X  |   Z  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[HALFQWERTY] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_BSPC,        KC_0,         KC_9,   KC_8,   KC_7,   KC_6,   KC_LEFT,
+        KC_TAB,         KC_P,         KC_O,   KC_I,   KC_U,   KC_Y,   TG(SYMB),
+        KC_BSPC,        KC_SCLN,      KC_L,   KC_K,   KC_J,   KC_H,
+        KC_LSFT,        KC_SLASH,  	  KC_DOT, KC_COMM,KC_M,   KC_N,   KC_TRANSPARENT,
+        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
+                                              KC_LALT,  KC_TRANSPARENT,
+                                                              KC_HOME,
+                                         KC_TRANSPARENT,KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_5,   KC_4,  KC_3,   KC_2,   KC_1,             KC_BSPC,
+             TG(SYMB),    KC_T,   KC_R,  KC_E,   KC_W,   KC_Q,             KC_BSLS,
+                          KC_G,   KC_F,  KC_D,   KC_S,   KC_A,  		   KC_ENT,
+             MEH_T(KC_NO),KC_B,   KC_V,  KC_C,   KC_X,   KC_Z,		   	   KC_RSFT,
+                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+             KC_TRANSPARENT,        KC_RALT,
+             KC_PGUP,
+             KC_PGDN,KC_TAB, KC_TRANSPARENT
+    ),
+/* Keymap 3: dvorak
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |  ESC   |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |  BSPC  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | TAB    |   '  |   ,  |   .  |   P  |   Y  |  L1  |           |  L1  |   F  |   G  |   C  |   R  |   L  |   /    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   S  |  -   |ENTER   |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |   ;  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |  Z   | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[DVORAK] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
+        KC_TAB,         KC_QUOTE,	  KC_COMM,KC_DOT, KC_P,   KC_Y,   TG(SYMB),
+        KC_BSPC,        KC_A,         KC_O,   KC_E,   KC_U,   KC_I,
+        KC_LSFT,        KC_SCLN,	  KC_Q,   KC_J,   KC_K,   KC_X,   ALL_T(KC_NO),
+        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
+                                              KC_LALT,  KC_TRANSPARENT,
+                                                              KC_HOME,
+                                         LT(HALFDVORAK, KC_SPACE),KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
+             TG(SYMB),    KC_F,   KC_G,  KC_C,   KC_R,   KC_L,             KC_BSLS,
+                          KC_D,   KC_H,  KC_T,   KC_S,   KC_MINUS,		   KC_ENT,
+             MEH_T(KC_NO),KC_B,   KC_M,  KC_W,	 KC_V,	 KC_Z,		   	   KC_RSFT,
+                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+             KC_TRANSPARENT,        KC_RALT,
+             KC_PGUP,
+             KC_PGDN,KC_TAB, LT(HALFDVORAK, KC_ENT)
+    ),
+/* Keymap 3: mirrored dvorak
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |  BSPC  |   0  |   9  |   8  |   7  |   6  | LEFT |           | RIGHT|   5  |   4  |   3  |   2  |   1  |  ESC  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | TAB    |   L  |   R  |   C  |   G  |   F  |  L1  |           |  L1  |   Y  |   P  |   .  |   ,  |   '  |   /    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   -  |   S  |   T  |   H  |   D  |------|           |------|   I  |   U  |   E  |   O  |   A  |ENTER   |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   V  |   W  |   M  |   B  |      |           |      |   X  |   K  |   J  |   Q  |   ;  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[HALFDVORAK] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_BSPC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
+        KC_SLASH,         KC_L,         KC_R,   KC_C,   KC_G,   KC_F,   TG(SYMB),
+        KC_ENT,        KC_S,         KC_N,   KC_T,   KC_H,   KC_D,
+        KC_LSFT,        KC_Z,  		  KC_V,   KC_W,   KC_M,   KC_B,   ALL_T(KC_NO),
+        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
+                                              KC_LALT,  KC_TRANSPARENT,
+                                                              KC_HOME,
+                                         KC_TRANSPARENT,KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_ESC,
+             TG(SYMB),    KC_Y,   KC_P,  KC_DOT, KC_COMM,KC_P,             KC_TAB,
+                          KC_I,   KC_U,  KC_E,   KC_O,   KC_A,		 	   KC_ENT,
+             MEH_T(KC_NO),KC_X,   KC_K,  KC_J,	 KC_Q,   KC_SCLN,	   	   KC_RSFT,
+                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+             KC_TRANSPARENT,        KC_RALT,
+             KC_PGUP,
+             KC_PGDN,KC_TAB, KC_TRANSPARENT
+    ),
+/* Keymap 5: Symbol Layer
+ *
+ * ,---------------------------------------------------.           ,--------------------------------------------------.
+ * |Version  |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
+ * |         |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | EPRM  |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `-----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Animat|      |       |Toggle|Solid |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |Bright|Bright|      |       |      |Hue-  |Hue+  |
+ *                                 |ness- |ness+ |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = LAYOUT_ergodox(
+       // left hand
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       RGB_MOD,KC_TRNS,
+                                               KC_TRNS,
+                               RGB_VAD,RGB_VAI,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       RGB_TOG, RGB_SLD,
+       KC_TRNS,
+       KC_TRNS, RGB_HUD, RGB_HUI
+),
+/* Keymap 6: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = LAYOUT_ergodox(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};

keyboards/ergodox_infinity/matrix.c

@@ -62,8 +62,8 @@ void matrix_init(void)
     palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL);
     palSetPadMode(GPIOD, 0,  PAL_MODE_OUTPUT_PUSHPULL);
 
-    memset(matrix, 0, MATRIX_ROWS);
-    memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS);
+    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS * sizeof(matrix_row_t));
 
     matrix_init_quantum();
 }

keyboards/gh60/info.json

@@ -1,9 +1,9 @@
 {
     "keyboard_name": "GH60", 
     "identifier": "FEED:6060:0001", 
-    "layout": {
+    "layouts": {
         "LAYOUT_60_ansi": {
-            "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":14, "y":0, "label":"Backspace", "w":2}, {"x":0.5, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":14, "y":1, "label":"|", "w":1.5}, {"x":0.75, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":14, "y":2, "label":"Enter", "w":2.25}, {"x":1.25, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":14, "y":3, "label":"Shift", "w":2.75}, {"x":0.25, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.5, "y":4, "label":"Win", "w":1.25}, {"x":2.75, "y":4, "label":"Alt", "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "label":"Alt", "w":1.25}, {"x":11.5, "y":4, "label":"Win", "w":1.25}, {"x":12.75, "y":4, "label":"Menu", "w":1.25}, {"x":14, "y":4, "label":"Ctrl", "w":1.25}]
+            "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
         }
     }, 
     "maintainer": "qmk", 
@@ -14,4 +14,4 @@
     "height": 5, 
     "url": "http://qmk.fm/keyboards/gh60", 
     "manufacturer": "geekhack"
-}
+}

keyboards/gherkin/keymaps/wanleg/config.h

@@ -0,0 +1,61 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    40 Percent Club
+#define PRODUCT         Gherkin
+#define DESCRIPTION     A 30 key ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 6
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/*tap dance definition */
+#define TAPPING_TERM 200
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/gherkin/keymaps/wanleg/keymap.c

@@ -0,0 +1,221 @@
+/* Copyright 2017 Brian Fong
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "gherkin.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define DIR 1
+#define NUM 2
+#define ETC 3
+
+
+/////////////// TAP DANCE SECTION START ///////////////
+//Tap Dance Declarations (list of my tap dance configurations)
+enum {
+  TD_SFT_CAPS = 0
+  ,TD_Q_ESC
+  ,ENT_TAP_DANCE
+  ,DEL_TAP_DANCE
+};
+
+///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION START /////
+///// (no need to edit this section) /////
+//Enums used to clearly convey the state of the tap dance
+enum {
+  SINGLE_TAP = 1,
+  SINGLE_HOLD = 2,
+  DOUBLE_TAP = 3,
+  DOUBLE_HOLD = 4,
+  DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP
+  // Add more enums here if you want for triple, quadruple, etc.
+};
+
+typedef struct {
+  bool is_press_action;
+  int state;
+} tap;
+
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    //If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP
+    if (state->interrupted || !state->pressed) return SINGLE_TAP;
+    if (state->interrupted) return SINGLE_TAP;
+    else return SINGLE_HOLD;
+  }
+  //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated
+  //with single tap.
+  else if (state->count == 2) {
+    if (state->interrupted) return DOUBLE_SINGLE_TAP;
+    else if (state->pressed) return DOUBLE_HOLD;
+    else return DOUBLE_TAP;
+  }
+  else return 6; //magic number. At some point this method will expand to work for more presses
+}
+///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION END /////
+///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION START /////
+//instantialize an instance of 'tap' for the 'ENT' tap dance.
+static tap ENTtap_state = {
+  .is_press_action = true,
+  .state = 0
+};
+
+void ENT_finished (qk_tap_dance_state_t *state, void *user_data) {
+  ENTtap_state.state = cur_dance(state);
+  switch (ENTtap_state.state) {
+    case SINGLE_TAP: register_code(KC_SPC); break;
+    case SINGLE_HOLD: register_code(KC_LSFT); break;
+    case DOUBLE_TAP: register_code(KC_ENT); break;
+    case DOUBLE_HOLD: register_code(KC_NO); break; // setting double hold to do nothing (change this if you want)
+    case DOUBLE_SINGLE_TAP: register_code(KC_SPC); unregister_code(KC_SPC); register_code(KC_SPC);
+    //Last case is for fast typing. Assuming your key is `f`:
+    //For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`.
+    //In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms.
+  }
+}
+
+void ENT_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (ENTtap_state.state) {
+    case SINGLE_TAP: unregister_code(KC_SPC); break;
+    case SINGLE_HOLD: unregister_code(KC_LSFT); break;
+    case DOUBLE_TAP: unregister_code(KC_ENT); break;
+    case DOUBLE_HOLD: unregister_code(KC_NO);
+    case DOUBLE_SINGLE_TAP: unregister_code(KC_SPC);
+  }
+  ENTtap_state.state = 0;
+}
+
+//instanalize an instance of 'tap' for the 'DEL' tap dance.
+static tap DELtap_state = {
+  .is_press_action = true,
+  .state = 0
+};
+
+void DEL_finished (qk_tap_dance_state_t *state, void *user_data) {
+  DELtap_state.state = cur_dance(state);
+  switch (DELtap_state.state) {
+    case SINGLE_TAP: register_code(KC_BSPC); break;
+    case SINGLE_HOLD: register_code(KC_LCTL); break;
+    case DOUBLE_TAP: register_code(KC_DEL); break;
+    case DOUBLE_HOLD: register_code(KC_NO); break;
+    case DOUBLE_SINGLE_TAP: register_code(KC_BSPC); unregister_code(KC_BSPC); register_code(KC_BSPC);
+  }
+}
+
+void DEL_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (DELtap_state.state) {
+    case SINGLE_TAP: unregister_code(KC_BSPC); break;
+    case SINGLE_HOLD: unregister_code(KC_LCTL); break;
+    case DOUBLE_TAP: unregister_code(KC_DEL); break;
+    case DOUBLE_HOLD: unregister_code(KC_NO);
+    case DOUBLE_SINGLE_TAP: unregister_code(KC_BSPC);
+  }
+  DELtap_state.state = 0;
+}
+///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION END /////
+
+//Tap Dance Definitions
+//THIS SECTION HAS TO BE AT THE END OF THE TAP DANCE SECTION
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS)
+// Other declarations would go here, separated by commas, if you have them
+ ,[TD_Q_ESC]  = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
+ ,[ENT_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ENT_finished, ENT_reset)
+ ,[DEL_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, DEL_finished, DEL_reset)
+};
+
+//In Layer declaration, add tap dance item in place of a key code
+//TD(TD_SFT_CAPS)
+
+///////////// TAP DANCE SECTION END ///////////////
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Qwerty
+ * .-----------------------------------------------------------------------------------------.
+ * | Q//ESC | W      | E      | R      | T      | Y      | U      | I      | O      | P      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | A      | S      | D      | F      | G      | H      | J      | K      | L      | ENTER  |
+ * |        |        |        |        |        |        |        |        |        |SFThold |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | Z      | X      | C      | V/NUM  | B/ETC  | N      | M/DIR  | ,/GUI  | ./ALT  | BKSC   |
+ * | SFThold|        |        |        |        |        |        |        |        |CTRLhold|
+ * '-----------------------------------------------------------------------------------------'
+ */
+
+ [_QW] = KEYMAP( /* Qwerty*/
+   TD(TD_Q_ESC), KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+   KC_A,    KC_S,    KC_D,    KC_F,    KC_G, KC_H,    KC_J,    KC_K,    KC_L,   SFT_T(KC_SPC),
+   SFT_T(KC_Z),    KC_X,    KC_C,    LT(NUM, KC_V), LT(ETC, KC_B), KC_N, LT(DIR, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC)
+  ),
+
+
+//
+///*
+// *  Directional Modifiers
+// * .-----------------------------------------------------------------------------------------.
+// * | TAB    |   up   |        | INS    |  CTRL  | SHIFT  | PgUp   | HOME   |  -     |  =     |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * | left   |  down  | right  | PrScr  | SHIFT  |  CTRL  | PgDn   | END    |  [     |  ]     |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * |        |        |        |        |        |        |        |        | ALT    |  /     |
+// * '-----------------------------------------------------------------------------------------'
+// */
+//
+[DIR] = KEYMAP( /* Directional Modifiers */
+  KC_TAB,  KC_UP,   KC_TRNS, KC_INS,  KC_LCTL, KC_RSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL  ,
+  KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_RCTL, KC_PGDN, KC_END,  KC_LBRC, KC_RBRC ,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_SLSH
+),
+//
+// /*
+//  *  Numbers
+//  * .-----------------------------------------------------------------------------------------.
+//  * | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+//  * | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+//  * | F11    | F12    |        |        |        | ENTER  | SHIFT  | GUI    | ./ALT  | BKSC   |
+//  * |        |        |        |        |        |        |        |        |        |CTRLhold|
+//  * '-----------------------------------------------------------------------------------------'
+//  */
+//
+[NUM] = KEYMAP ( /* Numbers */
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10  ,
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0    ,
+  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC)
+),
+//
+//
+//  /*
+//   *  ETC
+//   * .-----------------------------------------------------------------------------------------.
+//   * |  `     |        |        |        |        |        |        |        |        |  \     |
+//   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+//   * | CAPS   | P-Brk  |        |        |        |        |        |        |  ;     |  '     |
+//   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+//   * | SHIFT  |        |        |        |        | C-A-D  |        | GUI    |        |  DEL   |
+//   * '-----------------------------------------------------------------------------------------'
+//   */
+//
+[ETC] = KEYMAP( /* ETC */
+  KC_GRV,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS ,
+  KC_CAPS, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT ,
+  KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LALT(LCTL(KC_DEL)), KC_TRNS, KC_RGUI, KC_TRNS, KC_DEL
+ ),
+};

keyboards/gherkin/keymaps/wanleg/readme.md

@@ -0,0 +1,12 @@
+![Gherkin Wanleg Layout Image](https://i.imgur.com/RpN5N42.png)
+
+# Gherkin Wanleg Layout
+
+Here is the layout I came up with to preserve a standard QWERTY layout as much as possible, in as few layers as possible for a 30 key board.
+I originally set up a few Tap Dance keys, but eventually dropped most of them in favor of chorded versions, since in actual use, they tended to impede typing speed more than their (current) two-key versions.
+I've left them in my layout ready for use if anyone wants to try them out:
+Single tap - Double tap - Hold
+space - enter - shift
+backspace - delete - control
+shift - caps lock - XXXX
+KC_Q - escape - XXXX

keyboards/gherkin/keymaps/wanleg/rules.mk

@@ -0,0 +1,63 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+TAP_DANCE_ENABLE = yes		# Enable Tap Dance (comment if not being implemented)

keyboards/handwired/woodpad/keymaps/drashna/config.h

@@ -17,7 +17,7 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
+#include QMK_KEYBOARD_CONFIG_H
 
 #ifdef TAP_DANCE_ENABLE
 #define TAPPING_TERM 200

keyboards/infinity60/matrix.c

@@ -60,8 +60,8 @@ void matrix_init(void)
     palSetPadMode(GPIOC, 5,  PAL_MODE_OUTPUT_PUSHPULL);
     palSetPadMode(GPIOD, 0,  PAL_MODE_OUTPUT_PUSHPULL);
 #endif
-    memset(matrix, 0, MATRIX_ROWS);
-    memset(matrix_debouncing, 0, MATRIX_ROWS);
+    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
 
     matrix_init_quantum();
 }

keyboards/jc65/jc65.c

@@ -23,6 +23,14 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRB |= (1<<2);
+        PORTB &= ~(1<<2);
+    } else {
+        // Hi-Z
+        DDRB &= ~(1<<2);
+        PORTB &= ~(1<<2);
+    }
 	led_set_user(usb_led);
 }

keyboards/jc65/keymaps/coth/config.h

@@ -0,0 +1 @@
+#include "../../config.h"

keyboards/jc65/keymaps/coth/keymap.c

@@ -0,0 +1,25 @@
+#include "jc65.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = KEYMAP(
+      KC_GESC, KC_1,    KC_2,   KC_3,     KC_4,     KC_5,     KC_6,    KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV, KC_INS,
+      KC_TAB,  KC_Q,    KC_W,   KC_E,     KC_R,     KC_T,     KC_Y,    KC_U,  KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,
+      KC_LCTL, KC_A,    KC_S,   KC_D,     KC_F,     KC_G,     KC_H,    KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP,
+      KC_LSFT, KC_NUBS, KC_Z,   KC_X,     KC_C,     KC_V,     KC_B,    KC_N,  KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+      KC_LALT, KC_LCTL, KC_LGUI, KC_SPACE, KC_SPACE, KC_SPACE, MO(1),  KC_NO, MO(2),  KC_LEFT, KC_DOWN, KC_RGHT
+      ),
+  [1] = KEYMAP(
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,   KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_BTN2, KC_MS_U, KC_BTN1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_UP,   KC_HOME,  KC_END,  KC_DEL,  KC_TRNS,
+      KC_CAPS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_LEFT,  KC_DOWN, KC_RGHT, KC_TRNS, KC_VOLU,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN,  KC_PGUP, KC_TRNS,  KC_TRNS, KC_PGUP, KC_VOLD,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME,  KC_PGDN, KC_END
+      ),
+  [2] = KEYMAP(
+      RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_MOD, RGB_RMOD, BL_STEP, BL_TOGG, KC_TRNS, KC_TRNS, RESET,
+      KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS,  RGB_TOG,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_INC,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS,  RGB_HUD,  RGB_HUI, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,   KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD,  RGB_VAI,  KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS
+      ),
+};

keyboards/jc65/keymaps/coth/readme.md

@@ -0,0 +1,14 @@
+ChildoftheHorn's Keymap
+===
+ 
+Layer 1: "HHKB Mac" Split backspace, 6.25u space, caps is cntl
+
+Layer 2: V60++ with mouse controls on WASD
+
+Layer 3: RGB control on number row, LED controls, and Reset
+
+Keymap Maintainer: [Stacy Devino](https://github.com/childofthehorn)
+
+Difference from base layout: Primarily the HHKB-ness
+
+Intended usage: Daily driver for programming 

keyboards/jd45/keymaps/mjt/keymap.c

@@ -50,13 +50,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             // action_function_tap may also handle this...
             if (record->event.pressed)
             {
-                breathing_speed_set(3);
+                breathing_period_set(3);
                 breathing_enable();
                 layer_on(1);
             }
             else
             {
-                breathing_speed_set(1);
+                breathing_period_set(1);
                 breathing_self_disable();
                 layer_off(1);
             }
@@ -64,13 +64,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case M_LAYER2:
             if (record->event.pressed)
             {
-                breathing_speed_set(2);
+                breathing_period_set(2);
                 breathing_pulse();
                 layer_on(2);
             }
             else
             {
-                breathing_speed_set(1);
+                breathing_period_set(1);
                 breathing_self_disable();
                 layer_off(2);
             }

keyboards/jj40/config.h

@@ -15,6 +15,8 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
+#include "config_common.h"
+
 #ifndef CONFIG_H
 #define CONFIG_H
 
@@ -39,6 +41,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 
+/* RGB underglow */
+// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
+#define RGBLED_NUM 5
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 

keyboards/jj40/jj40.c

@@ -22,19 +22,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "action_layer.h"
 #include "quantum.h"
 
+#include "i2c.h"
+
+// custom RGB driver
+extern rgblight_config_t rgblight_config;
+void rgblight_set(void) {
+  if (!rgblight_config.enable) {
+    for (uint8_t i=0; i<RGBLED_NUM; i++) {
+      led[i].r = 0;
+      led[i].g = 0;
+      led[i].b = 0;
+    }
+  }
+
+  i2c_init();
+  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
 __attribute__ ((weak))
 void matrix_scan_user(void) {
-    /* Nothing to do here... yet */
+    rgblight_task();
+    /* Nothing else for now. */
 }
-
-void matrix_init_kb(void) {
-
-  // Call the keymap level matrix init.
-  matrix_init_user();
-
-  // Set our LED pins as output
-  DDRB |= (1<<6);
-}
-
-void matrix_init_user(void) {
-}

keyboards/jj40/jj40.h

@@ -65,6 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   { K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 }  \
 }
 
-#define KEYMAP KEYMAP_OFFSET
+#define KEYMAP KEYMAP_MIT
 
 #endif

keyboards/jj40/keymaps/fun40/rules.mk

@@ -11,7 +11,11 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = yes          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+DISABLE_WS2812 = yes
+
 
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/jj40/keymaps/krusli/keymap.c

@@ -0,0 +1,85 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "jj40.h"
+#include "action_layer.h"
+
+#define _QWERTY 0
+#define _LOWER  1
+#define _RAISE  2
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Ctrl | GUI  | Alt  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  _______, KC_LCTL, KC_LGUI, KC_LALT, MO(_LOWER),  KC_SPC,  MO(_RAISE),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,_______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 | RGB  | RGB  | RGB  | RGB  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | RGB  | RGB  | RGB  | RGB  |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, _______, \
+  _______, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+)
+};

keyboards/jj40/keymaps/krusli/readme.md

@@ -0,0 +1,2 @@
+# krusli
+Default JJ40 keymap, adapted with RGB underglow support. GUI and LAlt is also swapped.

keyboards/jj40/rules.mk

@@ -26,7 +26,7 @@ F_CPU = 12000000
 
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
+#     different sizes, comment this out, and the correct address will be loaded
 #     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = bootloadHID
 
@@ -37,8 +37,11 @@ EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = no
+
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+DISABLE_WS2812 = yes  # TODO check if this is necessary
+
 KEY_LOCK_ENABLE = yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/jj40/usbconfig.h

@@ -118,7 +118,8 @@ section at the end of this file).
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-#define USB_CFG_MAX_BUS_POWER           500
+// max power draw with maxed white underglow measured at 120 mA (peaks)
+#define USB_CFG_MAX_BUS_POWER           150
 /* Set this variable to the maximum USB bus power consumption of your device.
  * The value is in milliamperes. [It will be divided by two since USB
  * communicates power requirements in units of 2 mA.]

keyboards/jm60/matrix.c

@@ -49,8 +49,8 @@ void matrix_init(void)
     palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
     palSetPadMode(GPIOB, 0,  PAL_MODE_OUTPUT_PUSHPULL);
 
-    memset(matrix, 0, MATRIX_ROWS);
-    memset(matrix_debouncing, 0, MATRIX_ROWS);
+    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
 }
 
 uint8_t matrix_scan(void)

keyboards/k_type/matrix.c

@@ -42,8 +42,8 @@ void matrix_init(void)
     palSetPadMode(GPIOD, 1,   PAL_MODE_OUTPUT_PUSHPULL);
     palSetPadMode(GPIOD, 4,   PAL_MODE_OUTPUT_PUSHPULL);
 
-    memset(matrix, 0, MATRIX_ROWS);
-    memset(matrix_debouncing, 0, MATRIX_ROWS);
+    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
 
     matrix_init_quantum();
 }

keyboards/kbd75/keymaps/iso/keymap.c

@@ -0,0 +1,220 @@
+#include "kbd75.h"
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		LT(2, KC_ESC), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, MO(1), KC_DEL,
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, KC_HOME,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, M(1), M(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/kc60/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "KC60", 
+    "manufacturer": "NKPC", 
+    "processor": "atmega32u4", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":14, "y":0, "w":2}, {"x":0.5, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":14, "y":1, "w":1.5}, {"x":0.75, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":14, "y":2, "w":2.25}, {"x":1.25, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":14, "y":3, "w":2.75}, {"x":0.25, "y":4, "w":1.25}, {"x":1.5, "y":4, "w":1.25}, {"x":2.75, "y":4, "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "w":1.25}, {"x":11.5, "y":4, "w":1.25}, {"x":12.75, "y":4, "w":1.25}, {"x":14, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/lets_split/keymaps/default/keymap.c

@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -52,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  '   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Dvorak
  * ,-----------------------------------------------------------------------------------.
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * | Tab  |   '  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
@@ -88,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |      |   \  |  |   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|

keyboards/lets_split/matrix.c

@@ -124,6 +124,12 @@ uint8_t matrix_cols(void)
 
 void matrix_init(void)
 {
+#ifdef DISABLE_JTAG
+  // JTAG disable for PORT F. write JTD bit twice within four cycles.
+  MCUCR |= (1<<JTD);
+  MCUCR |= (1<<JTD);
+#endif
+
     debug_enable = true;
     debug_matrix = true;
     debug_mouse = true;

keyboards/lets_split/sockets/config.h

@@ -37,7 +37,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // wiring of each half
 #define MATRIX_ROW_PINS { B1, B5, E6, B4 }
 #define MATRIX_COL_PINS { F4, F7, D7, B3, B2, B6}
-// #define MATRIX_COL_PINS { B6, B2, B3, C6, F7, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+// #define MATRIX_COL_PINS { B6, B2, B3, D7, F7, F4} //uncomment this line and comment line above if you need to reverse left-to-right key order
 
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
@@ -59,8 +59,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 )
 
 /* ws2812 RGB LED */
-#define RGB_DI_PIN D4
-#define RGBLIGHT_TIMER 
+#define RGB_DI_PIN D1
+#define RGBLIGHT_TIMER
 #define RGBLED_NUM 12    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD

keyboards/lets_split/sockets/rules.mk

@@ -1,3 +1,3 @@
 BACKLIGHT_ENABLE = no
 AUDIO_ENABLE = yes
-RGBLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes #Don't enable this along with I2C

keyboards/lets_split/sockets/sockets.h

@@ -1,5 +1,6 @@
-#ifndef REV2_H
-#define REV2_H
+#ifndef SOCKETS_H
+#define SOCKETS_H
+#define DISABLE_JTAG // The keyboard uses PF4 and PF7, which are used by JTAG.
 
 #include "lets_split.h"
 

keyboards/mechmini/config.h

@@ -1,42 +1,28 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+ * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
+
 #include "config_common.h"
 
 #ifndef CONFIG_H
 #define CONFIG_H
 
-#define VENDOR_ID       0x20A0
-#define PRODUCT_ID      0x422D
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
-#define MANUFACTURER    winkeyless.kr
-#define PRODUCT         mechmini
-
-/* matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 15
-
-#define RGBLED_NUM 16
-#define RGBLIGHT_ANIMATIONS
-#define RGB_DI_PIN E2
-
-#define NO_UART 1
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xCA40
+#define MANUFACTURER    MECHKEYS
+#define PRODUCT         Mechmini
+#define DESCRIPTION     40% modular keyboard
 
 #endif

keyboards/mechmini/mechmini.c

@@ -1,45 +1,17 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+ * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "mechmini.h"
-#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-    rgblight_task();
-}

keyboards/mechmini/mechmini.h

@@ -1,42 +1,30 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+ * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #ifndef MECHMINI_H
 #define MECHMINI_H
 
-#include "keycode.h"
-#include "action.h"
 #include "quantum.h"
 
-#define KEYMAP( \
-    K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, \
-    K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, \
-    K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, \
-    K00, K10, K20,      K56, K57, KB0,           KC0, K66  \
-) \
-{ \
-    { K00, K10, K20, K56, KC_NO,    K57,    KC_NO, KC_NO,    KB0, KC0, K66, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO } \
-}
+#ifdef KEYBOARD_mechmini_v1
+    #include "v1.h"
+#endif
+
+#ifdef KEYBOARD_mechmini_v2
+    #include "v2.h"
+#endif
 
 #endif