adds per-layer rgb color option to ez

* mitosis/datagrok: reduce features from rules.mk

* mitosis/datagrok: make both layer keys neighbor shift

* mitosis/datagrok: (no-op) tweak some comments

* mitosis/datagrok: set baudrate to 250k

This requires a corresponding change to the mitosis wireless firmware:
https://github.com/reversebias/mitosis/pull/10

* mitosis/datagrok: move design description from code comment to a readme

* mitosis/datagrok: new layout, new shifted keys, efficient LED code

This is experimental, but compiles and seems to work correctly.

* mitosis/datagrok: whoops, move readme.md

* mitosis/datagrok: a minor layout improvement simplifies custom-shifted code

instead of [, .] [? !], using [, ?] [. !] greatly simplifies the code
needed to perform the shifted-key switching. (And keeps , and . on the
same keys that they are under qwerty.)

also: layout improvements for symbols

* mitosis/datagrok: make my code conform to QMK style guidelines

* mitosis/datagrok: TODO note for layout table in README

* mitosis/datagrok: remove led_set_user until i figure out other changes

need to see if the corresponding changes needed in the keyboard-level code
is okay.

* mitosis/datagrok: simpler layer indicator

* mitosis/datagrok: undo change to keyboard baud; make it in my layout dir.

* mitosis/datagrok: apply same punctuation hack to qwerty layer

* mitosis/datagrok: enable qwerty layer toggle

* mitosis/datagrok: update readme

.editorconfig

@@ -0,0 +1,18 @@
+# EditorConfig helps developers define and maintain consistent coding styles between different editors and IDEs
+# editorconfig.org
+
+root = true
+
+[*]
+indent_style = space
+indent_size = 2
+
+# We recommend you to keep these unchanged
+end_of_line = lf
+charset = utf-8
+trim_trailing_whitespace = true
+insert_final_newline = true
+
+[*.md]
+trim_trailing_whitespace = false
+indent_size = 4

.gitignore

@@ -4,6 +4,7 @@
 *.eep
 *.elf
 *.hex
+*.qmk
 !util/bootloader.hex
 !quantum/tools/eeprom_reset.hex
 *.log
@@ -21,8 +22,20 @@ build/
 quantum/version.h
 .idea/
 CMakeLists.txt
+cmake-build-debug
 .DS_STORE
 /util/wsl_downloaded
+/util/win_downloaded
+/keyboards/*/Makefile
+/keyboards/*/*/Makefile
+/keyboards/*/*/*/Makefile
+/keyboards/*/*/*/*/Makefile
+/keyboards/*/*/*/*/*/Makefile
+/keyboards/*/keymaps/Makefile
+/keyboards/*/*/keymaps/Makefile
+/keyboards/*/*/*/keymaps/Makefile
+/keyboards/*/*/*/*/keymaps/Makefile
+/keyboards/*/*/*/*/*/keymaps/Makefile
 
 # Eclipse/PyCharm/Other IDE Settings
 .cproject
@@ -32,5 +45,22 @@ CMakeLists.txt
 .browse.VC.db*
 *.stackdump
 util/Win_Check_Output.txt
-.vscode
+# Let these ones be user specific, since we have so many different configurations
+.vscode/launch.json
+.vscode/tasks.json
+.vscode/last.sql
+.vscode/temp.sql
 .stfolder
+
+# ignore image files
+*.png
+*.jpg
+*.gif
+
+# Do not ignore MiniDox left/right hand eeprom files
+!keyboards/minidox/*.eep
+
+# things travis sees
+secrets.tar
+id_rsa_*
+/.vs

.gitmodules

@@ -1,12 +1,12 @@
 [submodule "lib/chibios"]
 	path = lib/chibios
-	url = https://github.com/ChibiOS/ChibiOS.git
+	url = https://github.com/qmk/ChibiOS
 [submodule "lib/chibios-contrib"]
 	path = lib/chibios-contrib
-	url = https://github.com/ChibiOS/ChibiOS-Contrib.git
+	url = https://github.com/qmk/ChibiOS-Contrib
 [submodule "lib/ugfx"]
 	path = lib/ugfx
-	url = https://bitbucket.org/Tectu/ugfx
+	url = https://github.com/qmk/uGFX
 [submodule "lib/googletest"]
 	path = lib/googletest
 	url = https://github.com/google/googletest

.travis.yml

@@ -1,6 +1,7 @@
 os: linux
 dist: trusty
 sudo: required
+group: edge
 language: c
 branches:
   except:
@@ -10,16 +11,14 @@ env:
   global:
   - secure: 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
 before_install:
-  - wget http://www.atmel.com/images/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
-  - openssl aes-256-cbc -K $encrypted_b0ee987fd0fc_key -iv $encrypted_b0ee987fd0fc_iv -in secrets.tar.enc -out secrets.tar -d
-  - tar xvf secrets.tar
+  - wget http://www.atmel.com/images/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz || wget http://qmk.fm/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
 install:
   - tar -zxf avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
   - export PATH="$PATH:$TRAVIS_BUILD_DIR/avr8-gnu-toolchain-linux_x86_64/bin"
 before_script:
   - avr-gcc --version
 script:
-- make test AUTOGEN=false
+- make test:all AUTOGEN=false
 - bash util/travis_build.sh
 addons:
   apt:
@@ -30,12 +29,13 @@ addons:
     - binutils-arm-none-eabi
     - libnewlib-arm-none-eabi
     - diffutils
+    - dos2unix
 after_success: 
   bash util/travis_compiled_push.sh
 notifications:
   webhooks:
     urls:
-      - https://webhooks.gitter.im/e/cca31de3d44b9adb617b
-    on_success: change  # options: [always|never|change] default: always
+      - https://webhooks.gitter.im/e/afce403d65f143dfac09
+    on_success: always  # options: [always|never|change] default: always
     on_failure: always  # options: [always|never|change] default: always
     on_start: never     # options: [always|never|change] default: always

.vscode/extensions.json

@@ -0,0 +1,6 @@
+// Suggested extensions
+{
+  "recommendations": [
+    "EditorConfig.EditorConfig"
+  ]
+}

.vscode/settings.json

@@ -0,0 +1,16 @@
+// Place your settings in this file to overwrite default and user settings.
+{
+    // Unofficially, QMK uses spaces for indentation
+    "editor.insertSpaces": true,
+    // Configure glob patterns for excluding files and folders.
+    "files.exclude": {
+        "**/.build": true,
+        "**/*.hex": true
+    },
+    "files.associations": {
+        "*.h": "c",
+        "*.c": "c",
+        "*.cpp": "cpp",
+        "*.hpp": "cpp"
+    }
+}

CODE_OF_CONDUCT.md

@@ -0,0 +1,15 @@
+# Code Of Conduct
+
+QMK strives to be an inclusive and tolerant community. We welcome participation from anyone regardless of age, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, political belief, race, religion, or sexual identity and orientation. 
+
+> “A gentle word turns away wrath, but a harsh word stirs up anger.”
+
+Our users, contributors, and collaborators are expected to treat each other with respect, to assume good intentions, and to gently correct, where possible, rather than react with escalation. Some examples of behavior we will not tolerate include, but is not limited to:
+
+* The use of sexualized language or imagery
+* Unwelcome advances, sexual or otherwise
+* Insults or derogatory comments, or personal or political attacks
+* Publishing others’ private information without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a professional setting
+
+If someone is violating this Code of Conduct you may email hello@qmk.fm to bring your concern to the Members. All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. 

Dockerfile

@@ -15,6 +15,8 @@ RUN apt-get update && apt-get install --no-install-recommends -y build-essential
     binutils-arm-none-eabi \
     libnewlib-arm-none-eabi \
     git \
+    software-properties-common \
+    avrdude \
     && rm -rf /var/lib/apt/lists/*
 
 ENV keyboard=ergodox

Makefile

@@ -19,6 +19,11 @@ endif
 # Otherwise the [OK], [ERROR] and [WARN] messages won't be displayed correctly
 override SILENT := false
 
+QMK_VERSION := $(shell git describe --abbrev=0 --tags 2>/dev/null)
+ifneq ($(QMK_VERSION),)
+$(info QMK Firmware $(QMK_VERSION))
+endif
+
 ON_ERROR := error_occurred=1
 
 BREAK_ON_ERRORS = no
@@ -60,80 +65,86 @@ $(eval $(call NEXT_PATH_ELEMENT))
 # It's really a very simple if else chain, if you squint enough,
 # but the makefile syntax makes it very verbose.
 # If we are in a subfolder of keyboards
-ifeq ($(CURRENT_PATH_ELEMENT),keyboards)
-    $(eval $(call NEXT_PATH_ELEMENT))
-    KEYBOARD := $(CURRENT_PATH_ELEMENT)
-    $(eval $(call NEXT_PATH_ELEMENT))
-    # If we are in a subfolder of keymaps, or in other words in a keymap
-    # folder
-    ifeq ($(CURRENT_PATH_ELEMENT),keymaps)
-        $(eval $(call NEXT_PATH_ELEMENT))
-        KEYMAP := $(CURRENT_PATH_ELEMENT)
-     # else if we are not in the keyboard folder itself
-    else ifneq ($(CURRENT_PATH_ELEMENT),)
-        # the we can assume it's a subproject, as no other folders
-        # should have make files in them
-        SUBPROJECT := $(CURRENT_PATH_ELEMENT)
-        $(eval $(call NEXT_PATH_ELEMENT))
-        # if we are inside a keymap folder of a subproject
-        ifeq ($(CURRENT_PATH_ELEMENT),keymaps)
-            $(eval $(call NEXT_PATH_ELEMENT))
-            KEYMAP := $(CURRENT_PATH_ELEMENT)
-        endif
-    endif
-endif
+# 
+# *** No longer needed **
+#
+# ifeq ($(CURRENT_PATH_ELEMENT),keyboards)
+#     $(eval $(call NEXT_PATH_ELEMENT))
+#     KEYBOARD := $(CURRENT_PATH_ELEMENT)
+#     $(eval $(call NEXT_PATH_ELEMENT))
+#     # If we are in a subfolder of keymaps, or in other words in a keymap
+#     # folder
+#     ifeq ($(CURRENT_PATH_ELEMENT),keymaps)
+#         $(eval $(call NEXT_PATH_ELEMENT))
+#         KEYMAP := $(CURRENT_PATH_ELEMENT)
+#      # else if we are not in the keyboard folder itself
+#     else ifneq ($(CURRENT_PATH_ELEMENT),)
+#         # the we can assume it's a subproject, as no other folders
+#         # should have make files in them
+#         SUBPROJECT := $(CURRENT_PATH_ELEMENT)
+#         $(eval $(call NEXT_PATH_ELEMENT))
+#         # if we are inside a keymap folder of a subproject
+#         ifeq ($(CURRENT_PATH_ELEMENT),keymaps)
+#             $(eval $(call NEXT_PATH_ELEMENT))
+#             KEYMAP := $(CURRENT_PATH_ELEMENT)
+#         endif
+#     endif
+# endif
+
+define GET_KEYBOARDS
+    All_RULES_MK := $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/rules.mk))
+    All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/rules.mk))
+    All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/rules.mk))
+    All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/*/rules.mk))
+
+    KEYMAPS_MK := $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/keymaps/*/rules.mk))
+    KEYMAPS_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/keymaps/*/rules.mk))
+    KEYMAPS_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/keymaps/*/rules.mk))
+    KEYMAPS_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/*/keymaps/*/rules.mk))
+
+    KEYBOARDS := $$(sort $$(filter-out $$(KEYMAPS_MK), $$(All_RULES_MK)))
+endef
+
+$(eval $(call GET_KEYBOARDS))
 
 # Only consider folders with makefiles, to prevent errors in case there are extra folders
-KEYBOARDS := $(notdir $(patsubst %/Makefile,%,$(wildcard $(ROOT_DIR)/keyboards/*/Makefile)))
+#KEYBOARDS += $(patsubst $(ROOD_DIR)/keyboards/%/rules.mk,%,$(wildcard $(ROOT_DIR)/keyboards/*/*/rules.mk))
+
+list-keyboards:
+	echo $(KEYBOARDS)
+	exit 0
 
 #Compatibility with the old make variables, anything you specify directly on the command line
 # always overrides the detected folders
 ifdef keyboard
     KEYBOARD := $(keyboard)
 endif
-ifdef sub
-    SUBPROJECT := $(sub)
-endif
-ifdef subproject
-    SUBPROJECT := $(subproject)
-endif
 ifdef keymap
     KEYMAP := $(keymap)
 endif
 
 # Uncomment these for debugging
-#$(info Keyboard: $(KEYBOARD))
-#$(info Keymap: $(KEYMAP))
-#$(info Subproject: $(SUBPROJECT))
-#$(info Keyboards: $(KEYBOARDS))
+# $(info Keyboard: $(KEYBOARD))
+# $(info Keymap: $(KEYMAP))
+# $(info Subproject: $(SUBPROJECT))
+# $(info Keyboards: $(KEYBOARDS))
 
 
 # Set the default goal depending on where we are running make from
 # this handles the case where you run make without any arguments
-.DEFAULT_GOAL := all
+.DEFAULT_GOAL := all:all
 ifneq ($(KEYMAP),)
-    ifeq ($(SUBPROJECT),)
-         # Inside a keymap folder, just build the keymap, with the
-         # default subproject
-        .DEFAULT_GOAL := $(KEYBOARD)-$(KEYMAP)
-    else
-         # Inside a subproject keyamp folder, build the keymap
-         # for that subproject
-        .DEFAULT_GOAL := $(KEYBOARD)-$(SUBPROJECT)-$(KEYMAP)
-    endif
-else ifneq ($(SUBPROJECT),)
-     # Inside a subproject folder, build all keymaps for that subproject
-    .DEFAULT_GOAL := $(KEYBOARD)-$(SUBPROJECT)-allkm
+    .DEFAULT_GOAL := $(KEYBOARD):$(KEYMAP)
 else ifneq ($(KEYBOARD),)
      # Inside a keyboard folder, build all keymaps for all subprojects
      # Note that this is different from the old behaviour, which would
      # build only the default keymap of the default keyboard
-    .DEFAULT_GOAL := $(KEYBOARD)-allsp-allkm
+    .DEFAULT_GOAL := $(KEYBOARD):all
 endif
 
 
 # Compare the start of the RULE variable with the first argument($1)
-# If the rules equals $1 or starts with $1-, RULE_FOUND is set to true
+# If the rules equals $1 or starts with $1:, RULE_FOUND is set to true
 #     and $1 is removed from the RULE variable
 # Otherwise the RULE_FOUND variable is set to false, and RULE left as it was
 # The function is a bit tricky, since there's no built in $(startswith) function
@@ -142,10 +153,10 @@ define COMPARE_AND_REMOVE_FROM_RULE_HELPER
         RULE:=
         RULE_FOUND := true
     else
-        STARTDASH_REMOVED=$$(subst START$1-,,START$$(RULE))
-        ifneq ($$(STARTDASH_REMOVED),START$$(RULE))
+        STARTCOLON_REMOVED=$$(subst START$1:,,START$$(RULE))
+        ifneq ($$(STARTCOLON_REMOVED),START$$(RULE))
             RULE_FOUND := true
-            RULE := $$(STARTDASH_REMOVED)
+            RULE := $$(STARTCOLON_REMOVED)
         else
             RULE_FOUND := false
         endif
@@ -224,14 +235,14 @@ define PARSE_ALL_IN_LIST
 endef
 
 # The entry point for rule parsing
-# parses a rule in the format <keyboard>-<subproject>-<keymap>-<target>
+# parses a rule in the format <keyboard>:<keymap>:<target>
 # but this particular function only deals with the first <keyboard> part
 define PARSE_RULE
     RULE := $1
     COMMANDS :=
-    # If the rule starts with allkb, then continue the parsing from
+    # If the rule starts with all, then continue the parsing from
     # PARSE_ALL_KEYBOARDS
-    ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,allkb),true)
+    ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
         $$(eval $$(call PARSE_ALL_KEYBOARDS))
     else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,test),true)
         $$(eval $$(call PARSE_TEST))
@@ -245,35 +256,107 @@ define PARSE_RULE
         $$(eval $$(call PARSE_KEYBOARD,$$(KEYBOARD)))
     else
         $$(info make: *** No rule to make target '$1'. Stop.)
-        # Notice the tab instead of spaces below!
-		exit 1
+        $$(info |)
+        $$(info |  QMK's make format recently changed to use folder locations and colons:)
+        $$(info |     make project_folder:keymap[:target])
+        $$(info |  Examples:)
+        $$(info |     make planck/rev4:default:dfu)
+        $$(info |     make planck:default)
+        $$(info |)
     endif
 endef
 
 # $1 = Keyboard
-# Parses a rule in the format <subproject>-<keymap>-<target>
+# Parses a rule in the format <keymap>:<target>
 # the keyboard is already known when entering this function
 define PARSE_KEYBOARD
+    # If we want to compile the default subproject, then we need to
+    # include the correct makefile to determine the actual name of it
     CURRENT_KB := $1
-    # A subproject is any keyboard subfolder with a makefile
-    SUBPROJECTS := $$(notdir $$(patsubst %/Makefile,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/*/Makefile)))
-    # if the rule starts with allsp, then continue with looping over all subprojects
-    ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,allsp),true)
-        $$(eval $$(call PARSE_ALL_SUBPROJECTS))
-    # A special case for matching the defaultsp (default subproject)
-    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,defaultsp),true)
-        $$(eval $$(call PARSE_SUBPROJECT,defaultsp))
-    # If the rule starts with the name of a known subproject
-    else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(SUBPROJECTS)),true)
-        $$(eval $$(call PARSE_SUBPROJECT,$$(MATCHED_ITEM)))
-    # Try to use the SUBPROJECT variable, which is either determined by the
-    # directory which invoked make, or passed as an argument to make
-    else ifneq ($$(SUBPROJECT),)
-        $$(eval $$(call PARSE_SUBPROJECT,$$(SUBPROJECT)))
-	# If there's no matching subproject, we assume it's the default
-	# This will allow you to leave the subproject part of the target out
+
+    # KEYBOARD_FOLDERS := $$(subst /, , $(CURRENT_KB))
+
+    DEFAULT_FOLDER := $$(CURRENT_KB)
+
+    # We assume that every rules.mk will contain the full default value
+    $$(eval include $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/rules.mk)
+    ifneq ($$(DEFAULT_FOLDER),$$(CURRENT_KB))
+        $$(eval include $(ROOT_DIR)/keyboards/$$(DEFAULT_FOLDER)/rules.mk)
+    endif
+    CURRENT_KB := $$(DEFAULT_FOLDER)
+
+    # 5/4/3/2/1
+    KEYBOARD_FOLDER_PATH_1 := $$(CURRENT_KB)
+    KEYBOARD_FOLDER_PATH_2 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_1)))
+    KEYBOARD_FOLDER_PATH_3 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_2)))
+    KEYBOARD_FOLDER_PATH_4 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_3)))
+    KEYBOARD_FOLDER_PATH_5 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_4)))
+    KEYBOARD_FOLDER_1 := $$(notdir $$(KEYBOARD_FOLDER_PATH_1))
+    KEYBOARD_FOLDER_2 := $$(notdir $$(KEYBOARD_FOLDER_PATH_2))
+    KEYBOARD_FOLDER_3 := $$(notdir $$(KEYBOARD_FOLDER_PATH_3))
+    KEYBOARD_FOLDER_4 := $$(notdir $$(KEYBOARD_FOLDER_PATH_4))
+    KEYBOARD_FOLDER_5 := $$(notdir $$(KEYBOARD_FOLDER_PATH_5))
+
+    KEYMAPS :=
+    # get a list of all keymaps
+    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/keymaps/*/.)))
+    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/keymaps/*/.)))
+    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/keymaps/*/.)))
+    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/keymaps/*/.)))
+    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/keymaps/*/.)))
+    # this might be needed, but in a different form
+    #KEYMAPS := $$(sort $$(filter-out $$(KEYBOARD_FOLDER_1) $$(KEYBOARD_FOLDER_2) \
+        $$(KEYBOARD_FOLDER_3) $$(KEYBOARD_FOLDER_4) $$(KEYBOARD_FOLDER_5), $$(KEYMAPS)))
+
+    KEYBOARD_LAYOUTS :=
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_5)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_5)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_4)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_4)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_3)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_3)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_2)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_2)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_1)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_1)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
+
+    LAYOUT_KEYMAPS :=
+    $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.)))))
+    
+    KEYMAPS := $$(sort $$(KEYMAPS) $$(LAYOUT_KEYMAPS))
+
+    # if the rule after removing the start of it is empty (we haven't specified a kemap or target)
+    # compile all the keymaps
+    ifeq ($$(RULE),)
+        $$(eval $$(call PARSE_ALL_KEYMAPS))
+    # The same if all was specified
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
+        $$(eval $$(call PARSE_ALL_KEYMAPS))
+    # Try to match the specified keyamp with the list of known keymaps
+    else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(KEYMAPS)),true)
+        $$(eval $$(call PARSE_KEYMAP,$$(MATCHED_ITEM)))
+    # Otherwise try to match the keymap from the current folder, or arguments to the make command
+    else ifneq ($$(KEYMAP),)
+        $$(eval $$(call PARSE_KEYMAP,$$(KEYMAP)))
+    # Otherwise, make all keymaps, again this is consistent with how it works without
+    # any arguments
     else
-        $$(eval $$(call PARSE_SUBPROJECT,))
+        $$(eval $$(call PARSE_ALL_KEYMAPS))
     endif
 endef
 
@@ -286,74 +369,19 @@ endef
 # $1 Subproject
 # When entering this, the keyboard and subproject are known, so now we need
 # to determine which keymaps are going to get compiled
-define PARSE_SUBPROJECT
-    # If we want to compile the default subproject, then we need to
-    # include the correct makefile to determine the actual name of it
-    CURRENT_SP := $1
-    ifeq ($$(CURRENT_SP),)
-        CURRENT_SP := defaultsp
-    endif
-    ifeq ($$(CURRENT_SP),defaultsp)
-        SUBPROJECT_DEFAULT=
-        $$(eval include $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/Makefile)
-        CURRENT_SP := $$(SUBPROJECT_DEFAULT)
-    endif
-    # If current subproject is empty (the default was not defined), and we have a list of subproject
-    # then make all of them
-    ifeq ($$(CURRENT_SP),)
-        ifneq ($$(SUBPROJECTS),)
-            CURRENT_SP := allsp
-         endif
-    endif
-    # The special allsp is handled later
-    ifneq ($$(CURRENT_SP),allsp)
-        # get a list of all keymaps
-        KEYMAPS := $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/keymaps/*/.)))
-        ifneq ($$(CURRENT_SP),)
-            # if the subproject is defined, then also look for keymaps inside the subproject folder
-            SP_KEYMAPS := $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/$$(CURRENT_SP)/keymaps/*/.)))
-            KEYMAPS := $$(sort $$(KEYMAPS) $$(SP_KEYMAPS))
-        endif
-        # if the rule after removing the start of it is empty (we haven't specified a kemap or target)
-        # compile all the keymaps
-        ifeq ($$(RULE),)
-            $$(eval $$(call PARSE_ALL_KEYMAPS))
-        # The same if allkm was specified
-        else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,allkm),true)
-            $$(eval $$(call PARSE_ALL_KEYMAPS))
-        # Try to match the specified keyamp with the list of known keymaps
-        else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(KEYMAPS)),true)
-            $$(eval $$(call PARSE_KEYMAP,$$(MATCHED_ITEM)))
-        # Otherwise try to match the keymap from the current folder, or arguments to the make command
-        else ifneq ($$(KEYMAP),)
-            $$(eval $$(call PARSE_KEYMAP,$$(KEYMAP)))
-        # No matching keymap found, so we assume that the rest of the rule is the target
-        # If we haven't been able to parse out a subproject, then make all of them
-        # This is consistent with running make without any arguments from the keyboard
-        # folder
-        else ifeq ($1,)
-            $$(eval $$(call PARSE_ALL_SUBPROJECTS))
-        # Otherwise, make all keymaps, again this is consistent with how it works without
-        # any arguments
-        else
-            $$(eval $$(call PARSE_ALL_KEYMAPS))
-        endif
-    else
-        # As earlier mentioned when allsb is specified, we call our self recursively
-        # for all of the subprojects
-        $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_SUBPROJECT,$(SUBPROJECTS)))
-    endif
-endef
+# define PARSE_SUBPROJECT
+
+# endef
 
 # If we want to parse all subprojects, but the keyboard doesn't have any,
 # then use defaultsp instead
-define PARSE_ALL_SUBPROJECTS
-    ifeq ($$(SUBPROJECTS),)
-        $$(eval $$(call PARSE_SUBPROJECT,defaultsp))
-    else
-        $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_SUBPROJECT,$$(SUBPROJECTS)))
-    endif
-endef
+# define PARSE_ALL_SUBPROJECTS
+#     ifeq ($$(SUBPROJECTS),)
+#         $$(eval $$(call PARSE_SUBPROJECT,defaultsp))
+#     else
+#         $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_SUBPROJECT,$$(SUBPROJECTS)))
+#     endif
+# endef
 
 # $1 Keymap
 # This is the meat of compiling a keyboard, when entering this, everything is known
@@ -363,21 +391,18 @@ endef
 define PARSE_KEYMAP
     CURRENT_KM = $1
     # The rest of the rule is the target
-    # Remove the leading "-" from the target, as it acts as a separator
-    MAKE_TARGET := $$(patsubst -%,%,$$(RULE))
+    # Remove the leading ":" from the target, as it acts as a separator
+    MAKE_TARGET := $$(patsubst :%,%,$$(RULE))
     # We need to generate an unique indentifer to append to the COMMANDS list
-    COMMAND := COMMAND_KEYBOARD_$$(CURRENT_KB)_SUBPROJECT_$(CURRENT_SP)_KEYMAP_$$(CURRENT_KM)
+    CURRENT_KB_UNDER := $$(subst /,_,$$(CURRENT_KB))
+    COMMAND := COMMAND_KEYBOARD_$$(CURRENT_KB_UNDER)_KEYMAP_$$(CURRENT_KM)
     # If we are compiling a keyboard without a subproject, we want to display just the name
     # of the keyboard, otherwise keyboard/subproject
-    ifeq ($$(CURRENT_SP),)
-        KB_SP := $(CURRENT_KB)
-    else
-        KB_SP := $(CURRENT_KB)/$$(CURRENT_SP)
-    endif
+    KB_SP := $$(CURRENT_KB)
     # Format it in bold
     KB_SP := $(BOLD)$$(KB_SP)$(NO_COLOR)
     # Specify the variables that we are passing forward to submake
-    MAKE_VARS := KEYBOARD=$$(CURRENT_KB) SUBPROJECT=$$(CURRENT_SP) KEYMAP=$$(CURRENT_KM)
+    MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM)
     # And the first part of the make command
     MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_keyboard.mk $$(MAKE_TARGET)
     # The message to display
@@ -419,7 +444,7 @@ define BUILD_TEST
     MAKE_TARGET := $2
     COMMAND := $1
     MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_test.mk $$(MAKE_TARGET)
-    MAKE_VARS := TEST=$$(TEST_NAME)
+    MAKE_VARS := TEST=$$(TEST_NAME) FULL_TESTS="$$(FULL_TESTS)"
     MAKE_MSG := $$(MSG_MAKE_TEST)
     $$(eval $$(call BUILD))
     ifneq ($$(MAKE_TARGET),clean)
@@ -438,8 +463,8 @@ endef
 
 define PARSE_TEST
     TESTS :=
-    TEST_NAME := $$(firstword $$(subst -, ,$$(RULE)))
-    TEST_TARGET := $$(subst $$(TEST_NAME),,$$(subst $$(TEST_NAME)-,,$$(RULE)))
+    TEST_NAME := $$(firstword $$(subst :, ,$$(RULE)))
+    TEST_TARGET := $$(subst $$(TEST_NAME),,$$(subst $$(TEST_NAME):,,$$(RULE)))
     ifeq ($$(TEST_NAME),all)
         MATCHED_TESTS := $$(TEST_LIST)
     else
@@ -483,12 +508,9 @@ define RUN_TEST
 +error_occurred=0;\
 $($(TEST)_COMMAND)\
 if [ $$error_occurred -gt 0 ]; then $(HANDLE_ERROR); fi;
-endef
 
-# Allow specifying just the subproject, in the keyboard directory, which will compile all keymaps
-SUBPROJECTS := $(notdir $(patsubst %/Makefile,%,$(wildcard ./*/Makefile)))
-.PHONY: $(SUBPROJECTS)
-$(SUBPROJECTS): %: %-allkm
+
+endef
 
 # Let's match everything, we handle all the rule parsing ourselves
 .PHONY: %
@@ -497,6 +519,9 @@ $(SUBPROJECTS): %: %-allkm
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
+	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --init lib/chibios; fi
+	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --init lib/chibios-contrib; fi
+	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --init lib/ugfx; fi
 	git submodule status --recursive 2>/dev/null | \
 	while IFS= read -r x; do \
 		case "$$x" in \
@@ -517,22 +542,32 @@ endif
 	$(foreach TEST,$(TESTS),$(RUN_TEST))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 
+# These no longer work because of the colon system
+
 # All should compile everything
-.PHONY: all
-all: all-keyboards test-all
+# .PHONY: all
+# all: all-keyboards test-all
 
 # Define some shortcuts, mostly for compatibility with the old syntax
-.PHONY: all-keyboards
-all-keyboards: allkb-allsp-allkm
+# .PHONY: all-keyboards
+# all-keyboards: all\:all\:all
 
-.PHONY: all-keyboards-defaults
-all-keyboards-defaults: allkb-allsp-default
+# .PHONY: all-keyboards-defaults
+# all-keyboards-defaults: all\:default
 
-.PHONY: test
-test: test-all
+# .PHONY: test
+# test: test-all
 
-.PHONY: test-clean
-test-clean: test-all-clean
+# .PHONY: test-clean
+# test-clean: test-all-clean
+
+lib/%:
+	git submodule sync $?
+	git submodule update --init $?
+
+git-submodule:
+	git submodule sync --recursive
+	git submodule update --init --recursive
 
 ifdef SKIP_VERSION
 SKIP_GIT := yes

book.json

@@ -1,23 +1,46 @@
 {
     "structure": {
-        "readme": "Home.md"
+        "summary": "_summary.md"
     },
-    "plugins" : ["toolbar", "edit-link", "anchors"],
+    "plugins" : [
+      "edit-link",
+      "forkmegithub",
+      "hints",
+      "page-toc",
+      "terminal",
+      "toolbar",
+      "bulk-redirect"
+    ],
     "pluginsConfig": {
-            "edit-link": {
-                "base": "https://github.com/qmk/qmk_firmware/edit/master/docs",
-                "label": "Suggest an edit"
-            },
-        "toolbar": {
-            "buttons":
-            [
-                {
-                    "label": "QMK Firmware",
-                    "icon": "fa fa-github",
-                    "url": "https://github.com/qmk/qmk_firmware"
-                }
-            ]
-        }
+      "edit-link": {
+        "base": "https://github.com/qmk/qmk_firmware/edit/master/docs",
+        "label": "Suggest an edit"
+      },
+      "forkmegithub": {
+        "color": "red",
+        "url": "https://github.com/qmk/qmk_firmware"
+      },
+      "page-toc": {
+        "selector": ".markdown-section h1, .markdown-section h2"
+      },
+      "terminal": {
+        "copyButtons": true,
+        "fade": false,
+        "style": "flat"
+      },
+      "toolbar": {
+        "buttons": [
+          {
+            "label": "QMK Firmware",
+            "icon": "fa fa-github",
+            "url": "https://github.com/qmk/qmk_firmware"
+          }
+        ]
+      }, 
+      "bulk-redirect": {
+          "basepath": "/",
+          "redirectsFile": "docs/redirects.json"
+      }
     },
     "root": "./docs/"
 }

build_full_test.mk

@@ -0,0 +1,33 @@
+# Copyright 2017 Fred Sundvik
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#include $(TMK_PATH)/protocol.mk
+
+TEST_PATH=tests/$(TEST)
+
+$(TEST)_SRC= \
+	$(TEST_PATH)/keymap.c \
+	$(TMK_COMMON_SRC) \
+	$(QUANTUM_SRC) \
+	$(SRC) \
+	tests/test_common/matrix.c \
+	tests/test_common/test_driver.cpp \
+	tests/test_common/keyboard_report_util.cpp \
+	tests/test_common/test_fixture.cpp
+$(TEST)_SRC += $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp))
+
+$(TEST)_DEFS=$(TMK_COMMON_DEFS) $(OPT_DEFS)
+$(TEST)_CONFIG=$(TEST_PATH)/config.h
+VPATH+=$(TOP_DIR)/tests/test_common

build_keyboard.mk

@@ -6,18 +6,26 @@ endif
 
 include common.mk
 
-ifneq ($(SUBPROJECT),)
-    TARGET ?= $(KEYBOARD)_$(SUBPROJECT)_$(KEYMAP)
-    KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD)_$(SUBPROJECT)
-else
-    TARGET ?= $(KEYBOARD)_$(KEYMAP)
-    KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD)
-endif
+# 5/4/3/2/1
+KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
+KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
+KEYBOARD_FOLDER_PATH_3 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_2)))
+KEYBOARD_FOLDER_PATH_4 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_3)))
+KEYBOARD_FOLDER_PATH_5 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_4)))
+KEYBOARD_FOLDER_1 := $(notdir $(KEYBOARD_FOLDER_PATH_1))
+KEYBOARD_FOLDER_2 := $(notdir $(KEYBOARD_FOLDER_PATH_2))
+KEYBOARD_FOLDER_3 := $(notdir $(KEYBOARD_FOLDER_PATH_3))
+KEYBOARD_FOLDER_4 := $(notdir $(KEYBOARD_FOLDER_PATH_4))
+KEYBOARD_FOLDER_5 := $(notdir $(KEYBOARD_FOLDER_PATH_5))
+
+KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
+
+TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
+KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
 
 # Force expansion
 TARGET := $(TARGET)
 
-
 MASTER ?= left
 ifdef master
     MASTER = $(master)
@@ -31,30 +39,62 @@ $(error MASTER does not have a valid value(left/right))
     endif
 endif
 
+KEYBOARD_PATHS :=
 
+KEYBOARD_PATH_1 := keyboards/$(KEYBOARD_FOLDER_PATH_1)
+KEYBOARD_PATH_2 := keyboards/$(KEYBOARD_FOLDER_PATH_2)
+KEYBOARD_PATH_3 := keyboards/$(KEYBOARD_FOLDER_PATH_3)
+KEYBOARD_PATH_4 := keyboards/$(KEYBOARD_FOLDER_PATH_4)
+KEYBOARD_PATH_5 := keyboards/$(KEYBOARD_FOLDER_PATH_5)
 
-KEYBOARD_PATH := keyboards/$(KEYBOARD)
-KEYBOARD_C := $(KEYBOARD_PATH)/$(KEYBOARD).c
-
-ifneq ("$(wildcard $(KEYBOARD_C))","")
-    include $(KEYBOARD_PATH)/rules.mk
-else
-    $(error "$(KEYBOARD_C)" does not exist)
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
+    KEYBOARD_PATHS += $(KEYBOARD_PATH_5)
+    include $(KEYBOARD_PATH_5)/rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/rules.mk)","")
+    KEYBOARD_PATHS += $(KEYBOARD_PATH_4)
+    include $(KEYBOARD_PATH_4)/rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/rules.mk)","")
+    KEYBOARD_PATHS += $(KEYBOARD_PATH_3)
+    include $(KEYBOARD_PATH_3)/rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/rules.mk)","")
+    KEYBOARD_PATHS += $(KEYBOARD_PATH_2)
+    include $(KEYBOARD_PATH_2)/rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
+    KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
+    include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
+KEYBOARD_SRC :=
 
-ifneq ($(SUBPROJECT),)
-    SUBPROJECT_PATH := keyboards/$(KEYBOARD)/$(SUBPROJECT)
-    SUBPROJECT_C := $(SUBPROJECT_PATH)/$(SUBPROJECT).c
-    ifneq ("$(wildcard $(SUBPROJECT_C))","")
-        OPT_DEFS += -DSUBPROJECT_$(SUBPROJECT)
-        include $(SUBPROJECT_PATH)/rules.mk
-    else
-        $(error "$(SUBPROJECT_PATH)/$(SUBPROJECT).c" does not exist)
-    endif
+KEYBOARD_C_1 := $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).c
+KEYBOARD_C_2 := $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).c
+KEYBOARD_C_3 := $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).c
+KEYBOARD_C_4 := $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).c
+KEYBOARD_C_5 := $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).c
+
+ifneq ("$(wildcard $(KEYBOARD_C_5))","")
+    KEYBOARD_SRC += $(KEYBOARD_C_5)
+endif
+ifneq ("$(wildcard $(KEYBOARD_C_4))","")
+    KEYBOARD_SRC += $(KEYBOARD_C_4)
+endif
+ifneq ("$(wildcard $(KEYBOARD_C_3))","")
+    KEYBOARD_SRC += $(KEYBOARD_C_3)
+endif
+ifneq ("$(wildcard $(KEYBOARD_C_2))","")
+    KEYBOARD_SRC += $(KEYBOARD_C_2)
+endif
+ifneq ("$(wildcard $(KEYBOARD_C_1))","")
+    KEYBOARD_SRC += $(KEYBOARD_C_1)
 endif
 
-# We can assume a ChibiOS target When MCU_FAMILY is defined, since it's not used for LUFA
+OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE)
+
+# We can assume a ChibiOS target When MCU_FAMILY is defined , since it's not used for LUFA
 ifdef MCU_FAMILY
     PLATFORM=CHIBIOS
 else
@@ -65,206 +105,115 @@ ifeq ($(PLATFORM),CHIBIOS)
     include $(TMK_PATH)/protocol/chibios.mk
     include $(TMK_PATH)/chibios.mk
     OPT_OS = chibios
-    ifneq ("$(wildcard $(SUBPROJECT_PATH)/bootloader_defs.h)","")
-        OPT_DEFS += -include $(SUBPROJECT_PATH)/bootloader_defs.h
-    else ifneq ("$(wildcard $(SUBPROJECT_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
-        OPT_DEFS += -include $(SUBPROJECT_PATH)/boards/$(BOARD)/bootloader_defs.h
-    else ifneq ("$(wildcard $(KEYBOARD_PATH)/bootloader_defs.h)","")
-        OPT_DEFS += -include $(KEYBOARD_PATH)/bootloader_defs.h
-    else ifneq ("$(wildcard $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
-        OPT_DEFS += -include $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h
+    ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h
+     else ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h
+    else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_4)/bootloader_defs.h
+     else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h
+    else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_3)/bootloader_defs.h
+     else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h
+    else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_2)/bootloader_defs.h
+     else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h
+    else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h
+     else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h
     endif
 endif
 
-CONFIG_H = $(KEYBOARD_PATH)/config.h
-ifneq ($(SUBPROJECT),)
-    ifneq ("$(wildcard $(SUBPROJECT_C))","")
-        CONFIG_H = $(SUBPROJECT_PATH)/config.h
-    endif
+CONFIG_H :=
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","")
+    CONFIG_H += $(KEYBOARD_PATH_5)/config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/config.h)","")
+    CONFIG_H += $(KEYBOARD_PATH_4)/config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/config.h)","")
+    CONFIG_H += $(KEYBOARD_PATH_3)/config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/config.h)","")
+    CONFIG_H += $(KEYBOARD_PATH_2)/config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/config.h)","")
+    CONFIG_H += $(KEYBOARD_PATH_1)/config.h
 endif
 
 # Save the defines and includes here, so we don't include any keymap specific ones
 PROJECT_DEFS := $(OPT_DEFS)
-PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(SUBPROJECT_PATH) $(KEYBOARD_PATH)
+PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
 PROJECT_CONFIG := $(CONFIG_H)
 
-MAIN_KEYMAP_PATH := $(KEYBOARD_PATH)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_C := $(MAIN_KEYMAP_PATH)/keymap.c
-SUBPROJ_KEYMAP_PATH := $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)
-SUBPROJ_KEYMAP_C := $(SUBPROJ_KEYMAP_PATH)/keymap.c
-ifneq ("$(wildcard $(SUBPROJ_KEYMAP_C))","")
-    -include $(SUBPROJ_KEYMAP_PATH)/Makefile
-    KEYMAP_C := $(SUBPROJ_KEYMAP_C)
-    KEYMAP_PATH := $(SUBPROJ_KEYMAP_PATH)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_C))","")
-    -include $(MAIN_KEYMAP_PATH)/Makefile
-    KEYMAP_C := $(MAIN_KEYMAP_C)
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH)
-else
-    $(error "$(MAIN_KEYMAP_C)/keymap.c" does not exist)
+MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
+
+ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_5)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_4)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_3)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_2)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_1)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
+else ifneq ($(LAYOUTS),)
+    include build_layout.mk
+else 
+    $(error Could not find keymap)
+    # this state should never be reached
 endif
 
+# User space stuff
+USER_PATH := users/$(KEYMAP)
+-include $(USER_PATH)/rules.mk
 
 # Object files directory
 #     To put object files in current directory, use a dot (.), do NOT make
 #     this an empty or blank macro!
 KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
 
-
 ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
-    CONFIG_H = $(KEYMAP_PATH)/config.h
+    CONFIG_H += $(KEYMAP_PATH)/config.h
 endif
 
 # # project specific files
-SRC += $(KEYBOARD_C) \
+SRC += $(KEYBOARD_SRC) \
     $(KEYMAP_C) \
-    $(QUANTUM_DIR)/quantum.c \
-    $(QUANTUM_DIR)/keymap_common.c \
-    $(QUANTUM_DIR)/keycode_config.c \
-    $(QUANTUM_DIR)/process_keycode/process_leader.c
-
-ifneq ($(SUBPROJECT),)
-    SRC += $(SUBPROJECT_C)
-endif
-
-ifndef CUSTOM_MATRIX
-    SRC += $(QUANTUM_DIR)/matrix.c
-endif
-
-ifeq ($(strip $(API_SYSEX_ENABLE)), yes)
-    OPT_DEFS += -DAPI_SYSEX_ENABLE
-    SRC += $(QUANTUM_DIR)/api/api_sysex.c
-    OPT_DEFS += -DAPI_ENABLE
-    SRC += $(QUANTUM_DIR)/api.c
-    MIDI_ENABLE=yes
-endif
-
-MUSIC_ENABLE := 0
-
-ifeq ($(strip $(AUDIO_ENABLE)), yes)
-    OPT_DEFS += -DAUDIO_ENABLE
-    MUSIC_ENABLE := 1
-    SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
-    SRC += $(QUANTUM_DIR)/audio/audio.c
-    SRC += $(QUANTUM_DIR)/audio/voices.c
-    SRC += $(QUANTUM_DIR)/audio/luts.c
-endif
-
-ifeq ($(strip $(MIDI_ENABLE)), yes)
-    OPT_DEFS += -DMIDI_ENABLE
-    MUSIC_ENABLE := 1
-    SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c
-endif
-
-ifeq ($(MUSIC_ENABLE), 1)
-    SRC += $(QUANTUM_DIR)/process_keycode/process_music.c
-endif
-
-ifeq ($(strip $(COMBO_ENABLE)), yes)
-    OPT_DEFS += -DCOMBO_ENABLE
-    SRC += $(QUANTUM_DIR)/process_keycode/process_combo.c
-endif
-
-ifeq ($(strip $(VIRTSER_ENABLE)), yes)
-    OPT_DEFS += -DVIRTSER_ENABLE
-endif
-
-ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes)
-    OPT_DEFS += -DFAUXCLICKY_ENABLE
-    SRC += $(QUANTUM_DIR)/fauxclicky.c
-endif
-
-ifeq ($(strip $(UCIS_ENABLE)), yes)
-    OPT_DEFS += -DUCIS_ENABLE
-    UNICODE_COMMON = yes
-    SRC += $(QUANTUM_DIR)/process_keycode/process_ucis.c
-endif
-
-ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
-    OPT_DEFS += -DUNICODEMAP_ENABLE
-    UNICODE_COMMON = yes
-    SRC += $(QUANTUM_DIR)/process_keycode/process_unicodemap.c
-endif
-
-ifeq ($(strip $(UNICODE_ENABLE)), yes)
-    OPT_DEFS += -DUNICODE_ENABLE
-    UNICODE_COMMON = yes
-    SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
-endif
-
-ifeq ($(strip $(UNICODE_COMMON)), yes)
-    SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
-endif
-
-ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
-    OPT_DEFS += -DRGBLIGHT_ENABLE
-    SRC += $(QUANTUM_DIR)/light_ws2812.c
-    SRC += $(QUANTUM_DIR)/rgblight.c
-    CIE1931_CURVE = yes
-    LED_BREATHING_TABLE = yes
-endif
-
-ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
-    OPT_DEFS += -DTAP_DANCE_ENABLE
-    SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
-endif
-
-ifeq ($(strip $(PRINTING_ENABLE)), yes)
-    OPT_DEFS += -DPRINTING_ENABLE
-    SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c
-    SRC += $(TMK_DIR)/protocol/serial_uart.c
-endif
-
-ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes)
-    SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC))
-    OPT_DEFS += $(SERIAL_DEFS)
-    VAPTH += $(SERIAL_PATH)
-endif
-
-ifneq ($(strip $(VARIABLE_TRACE)),)
-    SRC += $(QUANTUM_DIR)/variable_trace.c
-    OPT_DEFS += -DNUM_TRACED_VARIABLES=$(strip $(VARIABLE_TRACE))
-ifneq ($(strip $(MAX_VARIABLE_TRACE_SIZE)),)
-    OPT_DEFS += -DMAX_VARIABLE_TRACE_SIZE=$(strip $(MAX_VARIABLE_TRACE_SIZE))
-endif
-endif
-
-ifeq ($(strip $(LCD_ENABLE)), yes)
-    CIE1931_CURVE = yes
-endif
-
-ifeq ($(strip $(LED_ENABLE)), yes)
-    CIE1931_CURVE = yes
-endif
-
-ifeq ($(strip $(CIE1931_CURVE)), yes)
-    OPT_DEFS += -DUSE_CIE1931_CURVE
-    LED_TABLES = yes
-endif
-
-ifeq ($(strip $(LED_BREATHING_TABLE)), yes)
-    OPT_DEFS += -DUSE_LED_BREATHING_TABLE
-    LED_TABLES = yes
-endif
-
-ifeq ($(strip $(LED_TABLES)), yes)
-    SRC += $(QUANTUM_DIR)/led_tables.c
-endif
+    $(QUANTUM_SRC)
 
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
 
 # Search Path
 VPATH += $(KEYMAP_PATH)
-ifneq ($(SUBPROJECT),)
-    VPATH += $(SUBPROJECT_PATH)
-endif
-VPATH += $(KEYBOARD_PATH)
+VPATH += $(KEYBOARD_PATHS)
 VPATH += $(COMMON_VPATH)
+VPATH += $(USER_PATH)
 
+include common_features.mk
 include $(TMK_PATH)/protocol.mk
-
 include $(TMK_PATH)/common.mk
+
 SRC += $(TMK_COMMON_SRC)
 OPT_DEFS += $(TMK_COMMON_DEFS)
 EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
@@ -286,13 +235,16 @@ endif
 
 OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
 $(KEYMAP_OUTPUT)_SRC := $(SRC)
-$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) -DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYMAP=\"$(KEYMAP)\"
+$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) \
+-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(KEYBOARD_FOLDER_1).h\" -DQMK_KEYBOARD_CONFIG_H=\"$(KEYBOARD_PATH_1)/config.h\" \
+-DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
+-DQMK_SUBPROJECT -DQMK_SUBPROJECT_H -DQMK_SUBPROJECT_CONFIG_H
 $(KEYMAP_OUTPUT)_INC :=  $(VPATH) $(EXTRAINCDIRS)
 $(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)
 $(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC) $(GFXSRC)
 $(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) $(GFXDEFS)
 $(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
-$(KEYBOARD_OUTPUT)_CONFIG  := $(PROJECT_CONFIG)
+$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 
 # Default target.
 all: build sizeafter
@@ -304,4 +256,3 @@ build: elf hex
 
 
 include $(TMK_PATH)/rules.mk
-

build_layout.mk

@@ -0,0 +1,18 @@
+LAYOUTS_PATH := layouts
+LAYOUTS_REPOS := $(patsubst %/,%,$(sort $(dir $(wildcard $(LAYOUTS_PATH)/*/))))
+
+define SEARCH_LAYOUTS_REPO
+    LAYOUT_KEYMAP_PATH := $$(LAYOUTS_REPO)/$$(LAYOUT)/$$(KEYMAP)
+    LAYOUT_KEYMAP_C := $$(LAYOUT_KEYMAP_PATH)/keymap.c
+    ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
+        -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
+        KEYMAP_C := $$(LAYOUT_KEYMAP_C)
+        KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
+    endif
+endef
+
+define SEARCH_LAYOUTS
+    $$(foreach LAYOUTS_REPO,$$(LAYOUTS_REPOS),$$(eval $$(call SEARCH_LAYOUTS_REPO)))
+endef
+
+$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))

build_test.mk

@@ -40,13 +40,23 @@ VPATH +=\
 all: elf
 
 VPATH += $(COMMON_VPATH)
+PLATFORM:=TEST
 
+ifneq ($(filter $(FULL_TESTS),$(TEST)),)
+include tests/$(TEST)/rules.mk
+endif
+
+include common_features.mk
 include $(TMK_PATH)/common.mk
 include $(QUANTUM_PATH)/serial_link/tests/rules.mk
+ifneq ($(filter $(FULL_TESTS),$(TEST)),)
+include build_full_test.mk
+endif
 
 $(TEST_OBJ)/$(TEST)_SRC := $($(TEST)_SRC)
 $(TEST_OBJ)/$(TEST)_INC := $($(TEST)_INC) $(VPATH) $(GTEST_INC)
 $(TEST_OBJ)/$(TEST)_DEFS := $($(TEST)_DEFS)
+$(TEST_OBJ)/$(TEST)_CONFIG := $($(TEST)_CONFIG)
 
 include $(TMK_PATH)/native.mk
 include $(TMK_PATH)/rules.mk

common.mk

@@ -9,13 +9,10 @@ LIB_PATH = $(TOP_DIR)/lib
 QUANTUM_DIR = quantum
 QUANTUM_PATH = $(TOP_DIR)/$(QUANTUM_DIR)
 
-BUILD_DIR := $(TOP_DIR)/.build
+DRIVER_DIR = drivers
+DRIVER_PATH = $(TOP_DIR)/$(DRIVER_DIR)
 
-SERIAL_DIR := $(QUANTUM_DIR)/serial_link
-SERIAL_PATH := $(QUANTUM_PATH)/serial_link
-SERIAL_SRC := $(wildcard $(SERIAL_PATH)/protocol/*.c)
-SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c)
-SERIAL_DEFS += -DSERIAL_LINK_ENABLE
+BUILD_DIR := $(TOP_DIR)/.build
 
 COMMON_VPATH := $(TOP_DIR)
 COMMON_VPATH += $(TMK_PATH)
@@ -24,4 +21,4 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
 COMMON_VPATH += $(QUANTUM_PATH)/audio
 COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
 COMMON_VPATH += $(QUANTUM_PATH)/api
-COMMON_VPATH += $(SERIAL_PATH)
+COMMON_VPATH += $(DRIVER_PATH)

common_features.mk

@@ -0,0 +1,188 @@
+# Copyright 2017 Fred Sundvik
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+SERIAL_DIR := $(QUANTUM_DIR)/serial_link
+SERIAL_PATH := $(QUANTUM_PATH)/serial_link
+SERIAL_SRC := $(wildcard $(SERIAL_PATH)/protocol/*.c)
+SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c)
+SERIAL_DEFS += -DSERIAL_LINK_ENABLE
+COMMON_VPATH += $(SERIAL_PATH)
+
+ifeq ($(strip $(API_SYSEX_ENABLE)), yes)
+    OPT_DEFS += -DAPI_SYSEX_ENABLE
+    SRC += $(QUANTUM_DIR)/api/api_sysex.c
+    OPT_DEFS += -DAPI_ENABLE
+    SRC += $(QUANTUM_DIR)/api.c
+    MIDI_ENABLE=yes
+endif
+
+MUSIC_ENABLE := 0
+
+ifeq ($(strip $(AUDIO_ENABLE)), yes)
+    OPT_DEFS += -DAUDIO_ENABLE
+    MUSIC_ENABLE := 1
+    SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
+    SRC += $(QUANTUM_DIR)/audio/audio.c
+    SRC += $(QUANTUM_DIR)/audio/voices.c
+    SRC += $(QUANTUM_DIR)/audio/luts.c
+endif
+
+ifeq ($(strip $(MIDI_ENABLE)), yes)
+    OPT_DEFS += -DMIDI_ENABLE
+    MUSIC_ENABLE := 1
+    SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c
+endif
+
+ifeq ($(MUSIC_ENABLE), 1)
+    SRC += $(QUANTUM_DIR)/process_keycode/process_music.c
+endif
+
+ifeq ($(strip $(COMBO_ENABLE)), yes)
+    OPT_DEFS += -DCOMBO_ENABLE
+    SRC += $(QUANTUM_DIR)/process_keycode/process_combo.c
+endif
+
+ifeq ($(strip $(STENO_ENABLE)), yes)
+    OPT_DEFS += -DSTENO_ENABLE
+	VIRTSER_ENABLE := yes
+	SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
+endif
+
+ifeq ($(strip $(VIRTSER_ENABLE)), yes)
+    OPT_DEFS += -DVIRTSER_ENABLE
+endif
+
+ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes)
+    OPT_DEFS += -DFAUXCLICKY_ENABLE
+    SRC += $(QUANTUM_DIR)/fauxclicky.c
+endif
+
+ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
+	OPT_DEFS += -DPOINTING_DEVICE_ENABLE
+	OPT_DEFS += -DMOUSE_ENABLE
+	SRC += $(QUANTUM_DIR)/pointing_device.c
+endif
+
+ifeq ($(strip $(UCIS_ENABLE)), yes)
+    OPT_DEFS += -DUCIS_ENABLE
+    UNICODE_COMMON = yes
+    SRC += $(QUANTUM_DIR)/process_keycode/process_ucis.c
+endif
+
+ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
+    OPT_DEFS += -DUNICODEMAP_ENABLE
+    UNICODE_COMMON = yes
+    SRC += $(QUANTUM_DIR)/process_keycode/process_unicodemap.c
+endif
+
+ifeq ($(strip $(UNICODE_ENABLE)), yes)
+    OPT_DEFS += -DUNICODE_ENABLE
+    UNICODE_COMMON = yes
+    SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
+endif
+
+ifeq ($(strip $(UNICODE_COMMON)), yes)
+    SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
+endif
+
+ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
+    OPT_DEFS += -DRGBLIGHT_ENABLE
+    SRC += $(QUANTUM_DIR)/rgblight.c
+    CIE1931_CURVE = yes
+    LED_BREATHING_TABLE = yes
+    ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
+        OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
+    else
+	    SRC += ws2812.c
+    endif
+endif
+
+ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
+    OPT_DEFS += -DTAP_DANCE_ENABLE
+    SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
+endif
+
+ifeq ($(strip $(KEY_LOCK_ENABLE)), yes)
+    OPT_DEFS += -DKEY_LOCK_ENABLE
+    SRC += $(QUANTUM_DIR)/process_keycode/process_key_lock.c
+endif
+
+ifeq ($(strip $(PRINTING_ENABLE)), yes)
+    OPT_DEFS += -DPRINTING_ENABLE
+    SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c
+    SRC += $(TMK_DIR)/protocol/serial_uart.c
+endif
+
+ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
+    OPT_DEFS += -DAUTO_SHIFT_ENABLE
+    SRC += $(QUANTUM_DIR)/process_keycode/process_auto_shift.c
+endif
+
+ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes)
+    SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC))
+    OPT_DEFS += $(SERIAL_DEFS)
+    VAPTH += $(SERIAL_PATH)
+endif
+
+ifneq ($(strip $(VARIABLE_TRACE)),)
+    SRC += $(QUANTUM_DIR)/variable_trace.c
+    OPT_DEFS += -DNUM_TRACED_VARIABLES=$(strip $(VARIABLE_TRACE))
+ifneq ($(strip $(MAX_VARIABLE_TRACE_SIZE)),)
+    OPT_DEFS += -DMAX_VARIABLE_TRACE_SIZE=$(strip $(MAX_VARIABLE_TRACE_SIZE))
+endif
+endif
+
+ifeq ($(strip $(LCD_ENABLE)), yes)
+    CIE1931_CURVE = yes
+endif
+
+ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
+    ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
+        CIE1931_CURVE = yes
+    endif
+endif
+
+ifeq ($(strip $(CIE1931_CURVE)), yes)
+    OPT_DEFS += -DUSE_CIE1931_CURVE
+    LED_TABLES = yes
+endif
+
+ifeq ($(strip $(LED_BREATHING_TABLE)), yes)
+    OPT_DEFS += -DUSE_LED_BREATHING_TABLE
+    LED_TABLES = yes
+endif
+
+ifeq ($(strip $(LED_TABLES)), yes)
+    SRC += $(QUANTUM_DIR)/led_tables.c
+endif
+
+ifeq ($(strip $(TERMINAL_ENABLE)), yes)
+    SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c
+    OPT_DEFS += -DTERMINAL_ENABLE
+endif
+
+ifeq ($(strip $(USB_HID_ENABLE)), yes)
+    include $(TMK_DIR)/protocol/usb_hid.mk
+endif
+
+QUANTUM_SRC:= \
+    $(QUANTUM_DIR)/quantum.c \
+    $(QUANTUM_DIR)/keymap_common.c \
+    $(QUANTUM_DIR)/keycode_config.c \
+    $(QUANTUM_DIR)/process_keycode/process_leader.c
+
+ifndef CUSTOM_MATRIX
+    QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+endif

docs/Adding-features-to-QMK.md

@@ -1,7 +0,0 @@
-If you have an idea for a custom feature or extra hardware connection, we'd love to accept it into QMK! These are generally done via [pull request](https://github.com/qmk/qmk_firmware/pulls) after forking, and here are some things to keep in mind when creating one:
-
-* **Disable by default** - memory is a pretty limited on most chips QMK supports, and it's important that current keymaps aren't broken, so please allow your feature to be turned **on**, rather than being turned off. If you think it should be on by default, or reduces the size of the code, [open an issue](https://github.com/qmk/qmk_firmware/issues) for everyone to discuss it!
-* **Compile locally before submitting** - hopefully this one is obvious, but things need to compile! Our Travis system will catch any issues, but it's generally faster for you to compile a few keyboards locally instead of waiting for the results to come back.
-* **Consider subprojects and different chip-bases** - there are several keyboards that have subprojects that have allow for slightly different configurations, and even different chip-bases. Try to make a feature supported in ARM and AVR, or automatically disabled in one that doesn't work.
-* **Explain your feature** - submitting a markdown write-up of what your feature does with your PR may be needed, and it will allow a collaborator to easily copy it into the wiki for documentation (after proofing and editing).
-* **Don't refactor code** - to maintain a clear vision of how things are laid out in QMK, we try to plan out refactors in-depth, and have a collaborator make the changes. If you have an idea for refactoring, or suggestions, [open an issue](https://github.com/qmk/qmk_firmware/issues).

docs/BUILD_GUIDE.md

@@ -1,103 +0,0 @@
-# This guide has now been included in the main readme - please reference that one instead.
-
-## Build Environment Setup
-
-### Windows (Vista and later)
-1. If you have ever installed WinAVR, uninstall it.
-2. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**.
-3. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location.
-4. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/qmk/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer.
-5. Double-click on the 1-setup-path-win batch script to run it. You'll need to accept a User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up.
-6. Right-click on the 2-setup-environment-win batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete!
-7. Future build commands should be run from the standard Windows command prompt, which you can find by searching for "command prompt" from the start menu or start screen. Ignore the "MHV AVR Shell".
-
-### Mac
-If you're using [homebrew,](http://brew.sh/) you can use the following commands:
-
-    brew tap osx-cross/avr
-    brew install avr-libc
-    brew install dfu-programmer
-
-This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line.
-
-You can also try these instructions:
-
-1. Install Xcode from the App Store.
-2. Install the Command Line Tools from `Xcode->Preferences->Downloads`.
-3. Install [DFU-Programmer][dfu-prog].
-
-### Linux
-Install AVR GCC, AVR libc, and dfu-progammer with your favorite package manager.
-
-Debian/Ubuntu example:
-
-    sudo apt-get update
-    sudo apt-get install gcc-avr avr-libc dfu-programmer
-
-### Vagrant
-If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](VAGRANT_GUIDE.md).
-
-## Verify Your Installation
-1. If you haven't already, obtain this repository ([https://github.com/qmk/qmk_firmware](https://github.com/qmk/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application.
-2. Open up a terminal or command prompt and navigate to the `qmk_firmware` folder using the `cd` command. The command prompt will typically open to your home directory. If, for example, you cloned the repository to your Documents folder, then you would type `cd Documents/qmk_firmware`. If you extracted the file from a zip, then it may be named `qmk_firmware-master` instead.
-3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `readme.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboards/`. For example, if you're building for a Planck, run `cd keyboards/planck`.
-4. Once you're in the correct keyboard-specific folder, run the `make` command. This should output a lot of information about the build process. More information about the `make` command can be found below.
-
-## Customizing, Building, and Deploying Your Firmware
-
-### The Make command
-
-The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). You can run `make` from the root (`/`), your keyboard folder (`/keyboards/<keyboard>/`), or your keymap folder (`/keyboards/<keyboard>/keymaps/<keymap>/`) if you have a `Makefile` there (see the example [here](/doc/keymap_makefile_example.mk)).
-
-By default, this will generate a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests.
-
-* The "root" (`/`) folder is the qmk_firmware folder, in which are `doc`, `keyboard`, `quantum`, etc.
-* The "keyboard" folder is any keyboard project's folder, like `/keyboards/planck`.
-* The "keymap" folder is any keymap's folder, like `/keyboards/planck/keymaps/default`.
-
-Below is a list of the useful `make` commands in QMK:
-
-* `make` - cleans automatically and builds your keyboard and keymap depending on which folder you're in. This defaults to the "default" layout (unless in a keymap folder), and Planck keyboard in the root folder
-  * `make keyboard=<keyboard>` - specifies the keyboard (only to be used in root)
-  * `make keymap=<keymap>` - specifies the keymap (only to be used in root and keyboard folder - not needed when in keymap folder)
-* `make quick` - skips the clean step (cannot be used immediately after modifying config.h or Makefiles)
-* `make dfu` - (requires dfu-programmer) builds and flashes the keymap to your keyboard once placed in reset/dfu mode (button or press `KC_RESET`). This does not work for Teensy-based keyboards like the ErgoDox EZ.
-  * `keyboard=` and `keymap=` are compatible with this
-* `make all-keyboards` - builds all keymaps for all keyboards and outputs status of each (use in root)
-* `make all-keyboards-default` - builds all default keymaps for all keyboards and outputs status of each (use in root)
-* `make all-keymaps [keyboard=<keyboard>]` - builds all of the keymaps for whatever keyboard folder you're in, or specified by `<keyboard>`
-* `make all-keyboards-quick`, `make all-keyboards-default-quick` and `make all-keymaps-quick [keyboard=<keyboard>]` - like the normal "make-all-*" commands, but they skip the clean steps
-
-Other, less useful functionality:
-
-* `make COLOR=false` - turns off color output
-* `make SILENT=true` - turns off output besides errors/warnings
-* `make VERBOSE=true` - outputs all of the avr-gcc stuff (not interesting)
-
-### The Makefile
-
-There are 3 different `make` and `Makefile` locations:
-
-* root (`/`)
-* keyboard (`/keyboards/<keyboard>/`)
-* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/`)
-
-The root contains the code used to automatically figure out which keymap or keymaps to compile based on your current directory and commandline arguments. It's considered stable, and shouldn't be modified. The keyboard one will contain the MCU set-up and default settings for your keyboard, and shouldn't be modified unless you are the producer of that keyboard. The keymap Makefile can be modified by users, and is optional. It is included automatically if it exists. You can see an example [here](/doc/keymap_makefile_example.mk) - the last few lines are the most important. The settings you set here will override any defaults set in the keyboard Makefile. **It is required if you want to run `make` in the keymap folder.**
-
-### The `config.h` file
-
-There are 2 `config.h` locations:
-
-* keyboard (`/keyboards/<keyboard>/`)
-* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/`)
-
-The keyboard `config.h` is included only if the keymap one doesn't exist. The format to use for your custom one [is here](/doc/keymap_config_h_example.h). If you want to override a setting from the parent `config.h` file, you need to do this:
-
-```
-#undef MY_SETTING
-#define MY_SETTING 4
-```
-
-For a value of `4` for this imaginary setting. So we `undef` it first, then `define` it.
-
-You can then override any settings, rather than having to copy and paste the whole thing.

docs/Build-Environment-Setup.md

@@ -1,119 +0,0 @@
-### Windows 10
-
-#### Creators Update
-If you have Windows 10 with Creators Update or later, you can build and flash the firmware directly. Before the Creators Update, only building was possible. If you don't have it yet or if are unsure, follow [these instructions](https://support.microsoft.com/en-us/instantanswers/d4efb316-79f0-1aa1-9ef3-dcada78f3fa0/get-the-windows-10-creators-update).
-
-#### Windows Subsystem for Linux
-In addition to the Creators Update, you need Windows 10 Subystem for Linux, so install it following [these instructions](http://www.howtogeek.com/249966/how-to-install-and-use-the-linux-bash-shell-on-windows-10/). If you already have the Windows 10 Subsystem for Linux from the Anniversary update it's recommended that you [upgrade](https://betanews.com/2017/04/14/upgrade-windows-subsystem-for-linux/) it to 16.04LTS, because some keyboards don't compile with the toolchains included in 14.04LTS. Note that you need to know what your are doing if you chose the `sudo do-release-upgrade` method.
-
-#### Git
-If you already have cloned the repository on your Windows file system you can ignore this section.
-
-You will need to clone the repository to your Windows file system using the normal Git for Windows and **not** the WSL Git. So if you haven't installed Git before, [download](https://git-scm.com/download/win) and install it. Then [set it up](https://git-scm.com/book/en/v2/Getting-Started-First-Time-Git-Setup), it's important that you setup the e-mail and user name, especially if you are planning to contribute. 
-
-Once Git is installed, open the Git bash command and change the directory to where you want to clone QMK, note that you have to use forward slashes, and that your c drive is accessed like this `/c/path/to/where/you/want/to/go`. Then run `git clone --recurse-submodules https://github.com/qmk/qmk_firmware`, this will create a new folder `qmk_firmware` as a subfolder of the current one.
-
-#### Toolchain setup
-The Toolchain setup is done through the Windows Subsystem for Linux, and the process is fully automated. If you want to do everything manually, there are no other instructions than the scripts themselves, but you can always open issues and ask for more information.
-
-1. Open "Bash On Ubuntu On Windows" from the start menu. 
-2. Go to the directory where you cloned `qmk_firmware`. Note that the paths start with `/mnt/` in the WSL, so you have to write for example `cd /mnt/c/path/to/qmk_firmware`. 
-3. Run `util/wsl_install.sh` and follow the on-screen instructions.
-4. Close the Bash command window, and re-open it.
-5. You are ready to compile and flash the firmware!
-
-#### Some important things to keep in mind
-* You can run `util/wsl_install.sh` again to get all the newest updates.
-* Your QMK repository need to be on a Windows file system path, since WSL can't run executables outside it.
-* The WSL Git is **not** compatible with the Windows Git, so use the Windows Git Bash or a windows Git GUI for all Git operations
-* You can edit files either inside WSL or normally using Windows, but note that if you edit makefiles or shell scripts, make sure you are using an editor that saves the files with Unix line endings. Otherwise the compilation might not work.
-
-### Windows (Vista and later)
-1. If you have ever installed WinAVR, uninstall it.
-2. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**.
-3. If you are going to flash Infinity based keyboards you will need to install dfu-util, refer to the instructions by [Input Club](https://github.com/kiibohd/controller/wiki/Loading-DFU-Firmware).
-4. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location.
-5. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/qmk/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer.
-6. Open the `\util` folder.
-7. Double-click on the `1-setup-path-win` batch script to run it. You'll need to accept a User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up.
-8. Right-click on the `2-setup-environment-win` batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete!
-
-If you have trouble and want to ask for help, it is useful to generate a *Win_Check_Output.txt* file by running `Win_Check.bat` in the `\util` folder.
-
-### Mac
-If you're using [homebrew,](http://brew.sh/) you can use the following commands:
-
-    brew tap osx-cross/avr
-    brew install avr-libc
-    brew install dfu-programmer
-
-This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-libc can take over 20 minutes and exhibit high CPU usage.
-
-You can also try these instructions:
-
-1. Install Xcode from the App Store.
-2. Install the Command Line Tools from `Xcode->Preferences->Downloads`.
-3. Install [DFU-Programmer](https://dfu-programmer.github.io/).
-
-If you are going to flash Infinity based keyboards you will also need dfu-util
-
-    brew install dfu-util
-
-### Linux
-
-To ensure you are always up to date, you can just run `sudo util/install_dependencies.sh`. That should always install all the dependencies needed. **This will run `apt-get upgrade`.**
-
-You can also install things manually, but this documentation might not be always up to date with all requirements.
-
-The current requirements are the following, but not all might be needed depending on what you do. Also note that some systems might not have all the dependencies available as packages, or they might be named differently.
-
-```
-build-essential
-gcc
-unzip
-wget
-zip
-gcc-avr
-binutils-avr
-avr-libc
-dfu-programmer
-dfu-util
-gcc-arm-none-eabi
-binutils-arm-none-eabi
-libnewlib-arm-none-eabi
-git
-```
-
-Install the dependencies with your favorite package manager.
-
-Debian/Ubuntu example:
-
-    sudo apt-get update
-    sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
-
-### Docker
-
-If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker](https://www.docker.com/products/docker), run the following command at the root of the QMK folder to build a keyboard/keymap:
-
-```bash
-# You'll run this every time you want to build a keymap
-# modify the keymap and keyboard assigment to compile what you want
-# defaults are ergodox/default
-
-docker run -e keymap=gwen -e subproject=ez -e keyboard=ergodox --rm -v $('pwd'):/qmk:rw edasque/qmk_firmware
-
-# On windows docker seems to have issue with VOLUME tag in Dockerfile, and $('pwd') won't print a windows compliant path, use full path instead like this
-docker run -e keymap=default -e subproject=ez -e keyboard=ergobox --rm -v D:/Users/Sacapuces/Documents/Repositories/qmk:/qmk:rw edasque/qmk_firmware
-
-```
-
-This will compile the targeted keyboard/keymap and leave it in your QMK directory for you to flash.
-
-### Vagrant
-If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](https://github.com/qmk/qmk_firmware/blob/master/doc/VAGRANT_GUIDE.md).
-
-## Verify Your Installation
-1. If you haven't already, obtain this repository ([https://github.com/qmk/qmk_firmware](https://github.com/qmk/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application.
-2. Open up a terminal or command prompt and navigate to the `qmk_firmware` folder using the `cd` command. The command prompt will typically open to your home directory. If, for example, you cloned the repository to your Documents folder, then you would type `cd Documents/qmk_firmware`. If you extracted the file from a zip, then it may be named `qmk_firmware-master` instead.
-3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `readme.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboards/`. For example, if you're building for a Planck, run `cd keyboards/planck`.
-4. Once you're in the correct keyboard-specific folder, run the `make` command. This should output a lot of information about the build process. More information about the `make` command can be found below.

docs/CYGWIN_GUIDE.md

@@ -1,352 +0,0 @@
-#Planck Advanced (but not too advanced) `cygwin` Users Guide
-If you are a user of the [cygwin environment](https://cygwin.com) in Windows and want the freedom to use the latest tools available, then this is the guide for you. If compiling your own copy of the latest and greatest Gnu C Compiler makes you super happy, then this is the guide for you. If the command line make you smile, then this is the guide for you.
-
-This guide was written step by step as I went through the process on a `Windows 10` `x86_64` and a `Windows 7` `amd k10` based system.  This should be generally applicable to to any `Windows` environment with `cygwin`.
-
-#####Do not skip steps. Do not move past a step until the previous step finishes successfully.
-
-Based on [avr-libc installation guide](http://www.nongnu.org/avr-libc/user-manual/install_tools.html)
-
-##Get the Required Packages
-Download the `cygwin` setup ([x86_64](https://cygwin.com/setup-x86_64.exe)) and install the default system plus the following if they are not already selected:
-- devel/git
-- devel/gcc-core
-- devel/gcc-g++
-- devel/flex
-- devel/bison
-- devel/make
-- devel/texinfo
-- devel/gettext-devel
-- devel/automake
-- devel/autoconfig
-- devel/libtool
-- text/gettext
-- libs/libgcc1
-- interpreters/m4
-- web/wget
-- archive/unzip
-
-The following sources will be required:
-- [gmp](https://gmplib.org/) (6.1.0)
-- [mpfr](http://www.mpfr.org/) (3.1.4)
-- [mpc](http://www.multiprecision.org/) (1.0.3) 
-- [binutils](https://www.sourceware.org/binutils/) (2.26)
-- [gcc](https://gcc.gnu.org/) (5.3.0)
-- [avr-libc](http://www.nongnu.org/avr-libc/) (2.0.0)
-
-The `dfu-programmer` will be required to flash the new firmware 
-- [dfu-programmer](https://dfu-programmer.github.io/) (0.7.2)
-
-The set of commands below will create a directory (`~/local/avr`) for the sources you compile to be installed on the machine and a directory (`~/src`) for these source files to be stored. The commands then download the sources of the needed packages and unpack them. Note: the expand commands are different depending on if the packages are offered as a `bz2` or `gz` archive
-```
-$ mkdir ~/local
-$ mkdir ~/local/avr
-$ mkdir ~/src
-$ cd ~/src
-$ wget https://gmplib.org/download/gmp/gmp-6.1.0.tar.bz2
-$ wget http://www.mpfr.org/mpfr-3.1.4/mpfr-3.1.4.tar.bz2
-$ wget ftp://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz
-$ wget http://ftp.gnu.org/gnu/binutils/binutils-2.26.tar.gz
-$ wget http://mirror0.babylon.network/gcc/releases/gcc-5.3.0/gcc-5.3.0.tar.gz
-$ wget http://download.savannah.gnu.org/releases/avr-libc/avr-libc-2.0.0.tar.bz2
-$ tar -xjf gmp-6.1.0.tar.bz2
-$ tar -xjf mpfr-3.1.4.tar.bz2
-$ tar -zxf mpc-1.0.3.tar.gz
-$ tar -zxf binutils-2.26.tar.gz
-$ tar -zxf gcc-5.3.0.tar.gz
-$ tar -xjf avr-libc-2.0.0.tar.bz2 
-```
-
-##Setup the Build Environment
-These commands will set up the install directory and the `PATH` variable, which will allow you to access your installed packages.  Note: if you close the `cygwin` terminal window, you will need to rerun these commands, they are not permanent.
-```
-$ PREFIX=$HOME/local/avr
-$ export PREFIX
-$ PATH=/usr/local/bin:/usr/local/lib:/usr/local/include:/bin:/lib:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS
-$ PATH=$PATH:$PREFIX/bin:$PREFIX/lib
-$ export PATH
-```
-
-##The `gcc` Required Math Library Packages
-The following packages are required to be complied and installed in order to compile `gcc`.  They are not sufficiently available through the `cygwin` package system, so we have to make them ourselves.  They must be complied in this order because each one depends on the previous. Verfiy that for each package, `make check` returns all passing and no fails.
-
-###Build and Install `gmp`
-```
-$ cd ~/src/gmp-6.1.0
-$ ./configure --enable-static --disable-shared
-$ make
-$ make check
-$ make install
-```
-
-###Build and Install `mpfr`
-```
-$ cd ~/src/mpfr-3.1.4
-$ ./configure --with-gmp-build=../gmp-6.1.0 --enable-static --disable-shared
-$ make
-$ make check
-$ make install
-```
-
-###Build and Install `mpc`
-```
-$ cd ~/src/mpc-1.0.3
-$ ./configure --with-gmp=/usr/local --with-mpfr=/usr/local --enable-static --disable-shared
-$ make
-$ make check
-$ make install
-```
-
-##OPTIONAL Part
-You can build and install a brand new `gcc` or you can use the one supplied by `cygwin`.  This will take about 4-5 hours to compile (It is a "native build", so it does the entire build **3 times**. This takes a long while).
-
-###Build and Install `gcc` for Your Machine  
-```
-$ cd ~/src/gcc-5.3.0
-$ mkdir obj-local
-$ cd obj-local
-$ ../configure --enable-languages=c,c++ --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --enable-static --disable-shared
-$ make
-$ make install
-```
-##End OPTIONAL Part
-
-###Build and Install `binutils` for Your Machine
-```
-$ cd ~/src/binutils-2.26
-$ mkdir obj-local
-$ cd obj-local
-$ ../configure
-$ make
-$ make install
-```
-
-##Buliding `binutils`, `gcc`, and `avr-libc` for the AVR system
-Now we can make the critical stuff for compiling our firmware: `binutils`, `gcc`, and `avr-libc` for the AVR architecture.  These allow us to build and manipulate the firmware for the keyboard.
-
-###Build `binutils` for AVR
-If you plan to build and install `avr-gdb` also, use the `gdb` install at the end of this guide as it also builds the `binutils`
-```
-$ cd ~/src/binutils-2.26
-$ mkdir obj-avr
-$ cd obj-avr
-$ ../configure --prefix=$PREFIX --target=avr --disable-nls
-$ make
-$ make install
-```
-
-###Build `gcc` for AVR
-```
-$ cd ~/src/gcc-5.3.0
-$ mkdir obj-avr
-$ cd obj-avr
-$ ../configure --prefix=$PREFIX --target=avr --enable-languages=c,c++ --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --enable-static --disable-shared --disable-nls --disable-libssp --with-dwarf2
-$ make
-$ make install
-```
-
-###Build `avr-libc` for AVR
-For building the `avr-libc`, we have to specify the host build system.  In my case it is `x86_64-unknown-cygwin`. You can look for build system type in the `gcc` configure notes for the proper `--build` specification to pass when you configure `avr-libc`.
-```
-$ cd ~/src/avr-libc-2.0.0
-$ ./configure --prefix=$PREFIX --build=x86_64-unknown-cygwin --host=avr
-$ make
-$ make install
-```
-
-##Building 'dfu-programmer' for flashing the firmware via USB and installing the drivers
-We can either build our own, or use the precomplied binaries.  The precompiled binaries don't play well with `cygwin` so it is better to build them ourselves.  The procedure for the precompiled binaries is included at the end of this guide.
-
-### Build and Install the `libusb`
-The `dfu-programmer` requires `libusb` so that it can interact with the USB system. These repos must be bootstrapped in order to create an appropriate `./configure` and `Makefile` for your system.
-```
-$ cd ~/src
-$ git clone https://github.com/libusb/libusb.git
-$ cd libusb
-$ ./bootstrap.sh
-$ ./configure
-$ make
-$ make install
-```
-
-### Build and Install the `dfu-programmer`
-```
-$ cd ~/src
-$ git clone https://github.com/dfu-programmer/dfu-programmer.git
-$ cd dfu-programmer
-$ ./bootstrap.sh
-$ ./configure
-$ make
-$ make install
-```
-
-Verify the installation with:
-```
-$ which dfu-programmer
-/usr/local/bin/dfu-programmer
-
-$ dfu-programmer
-dfu-programmer 0.7.2
-https://github.com/dfu-programmer/dfu-programmer
-Type 'dfu-programmer --help'    for a list of commands
-     'dfu-programmer --targets' to list supported target devices
-```
-If you are not getting the above result, you will not be able to flash the firmware! 
-
-###Install the USB drivers
-The drivers are included in the windows binary version of [`dfu-programmer` 0.7.2](http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip).
-```
-$ cd ~/src
-$ wget http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip
-$ unzip dfu-programmer-win-0.7.2.zip -d dfu-programmer-win-0.7.2
-```
-
-or
-
-The official drivers are found in [Atmel's `FLIP` installer](http://www.atmel.com/images/Flip%20Installer%20-%203.4.7.112.exe). Download and then install `FLIP`. Upon installation, the drivers will be found in `C:\Program Files (x86)\Atmel\Flip 3.4.7\usb`.
-
-Then, from an **administrator-privileged** `Windows` terminal, run the following command (adjust the path for username, etc. as necessary) and accept the prompt that pops up:
-```
-C:\> pnputil -i -a C:\cygwin64\home\Kevin\src\dfu-programmer-win-0.7.2\dfu-prog-usb-1.2.2\atmel_usb_dfu.inf
-or
-C:\> pnputil -i -a "C:\Program Files (x86)\Atmel\Flip 3.4.7\usb\atmel_usb_dfu.inf"
-```
-
-This should be the result:
-```
-Microsoft PnP Utility
-
-Processing inf :            atmel_usb_dfu.inf
-Successfully installed the driver on a device on the system.
-Driver package added successfully.
-Published name :            oem104.inf
-
-
-Total attempted:              1
-Number successfully imported: 1
-```
-
-Alternatively, the `Windows` driver can be installed when prompted by `Windows` when the keyboard is attached. Do not let `Windows` search for a driver; specify the path to search for a driver and point it to the `atmel_usb_dfu.inf` file.
-
-##Building and Flashing the Planck firmware!
-If you did everything else right. This part should be a snap! Grab the latest sources from `github`, make the Plank firmware, then flash it.
-
-###Build Planck and Load the Firmware
-```
-$ cd ~/src
-$ git clone https://github.com/qmk/qmk_firmware.git
-$ cd qmk_firmware/keyboards/planck
-$ make
-```
-
-Make sure there are no errors.  You should end up with this or something similar:
-```
-Creating load file for Flash: planck.hex
-avr-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature planck.elf planck.hex
-
-Creating load file for EEPROM: planck.eep
-avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \
---change-section-lma .eeprom=0 --no-change-warnings -O ihex planck.elf planck.eep || exit 0
-
-Creating Extended Listing: planck.lss
-avr-objdump -h -S -z planck.elf > planck.lss
-
-Creating Symbol Table: planck.sym
-avr-nm -n planck.elf > planck.sym
-
-Size after:
-   text    data     bss     dec     hex filename
-  18602      82     155   18839    4997 planck.elf
-
--------- end --------
-```
-
-If you do not get the above, you **did not** build the firmware, and you will have nothing to flash.  If you have the fresh clone from `github`, it was probably something gone wrong in this install process, go check and see what didn't work and threw errors or what steps you might have missed.
-
-But if everything went OK, you are ready to flash! Press the reset button on the bottom of the Planck, wait two seconds, then:
-```
-$ make dfu
-```
-.
-.
-.
-profit!!!
-
-
-
-
-
-##extra bits...
-
-###Installing Precompiled `dfu-programmer` Binaries (not recommended for `cygwin`)
-To install the `dfu-programmer` from the binaries, we must get if from [the `dfu-programmer` website](https://dfu-programmer.github.io/) ([0.7.2](http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip)).
-
-Copy this file into your `cygwin` home\src directory.  (For me, it is `C:\cygwin64\home\Kevin\src`), extract the files, move `dfu-programmer.exe` to `~/local/avr/bin`. Most obnoxiously, the `libusb0_x86.dll` and `libusb0.sys` need to be moved from  `./dfu-prog-usb-1.2.2/x86/` to a directory in the `Windows` `PATH` and the `cygwin` `PATH`. This is because the `dfu-programmer` binary is `mingw` based, not `cygwin` based, so the `dlls` do not cooperate. I achieved acceptable pathing by moving the files to  `C:\cygwin64\home\Kevin\local\avr\bin` Then, in a `WINDOWS` command prompt running (Adjusting your path for username, etc. as needed):
-```
-C:\> set PATH=%PATH%;C:\cygwin64\home\Kevin\local\avr\bin
-```
-
-Then, rename `libusb0_x86.dll` to `libusb0.dll`.
- 
-You can tell that you were successful by trying to execute 'dfu-programmer' from the 'cygwin' prompt:
-```
-$ which dfu-programmer
-/home/Kevin/local/avr/bin/dfu-programmer
-
-$ dfu-programmer
-dfu-programmer 0.7.2
-https://github.com/dfu-programmer/dfu-programmer
-Type 'dfu-programmer --help'    for a list of commands
-     'dfu-programmer --targets' to list supported target devices
-```
-
-If you are not getting the above result, you will not be able to flash the firmware! 
-- Try making sure your `PATH` variables are set correctly for both `Windows` and `cygwin`. 
-- Make sure the `dll` is named correctly.
-- Do not extract it with `cygwin`'s `unzip` as it does not set the executable permission. If you did it anyway, do `chmod +x dfu-programmer.exe`.
-- Still have problems? Try building it instead.
-
-
-##Debugging Tools
-
-These tools are for debugging your firmware, etc. before flashing. Theoretically, it can save your memory from wearing out. However, these tool do not work 100% for the Planck firmware.
-
-### `gdb` for AVR
-`gdb` has a simulator for AVR but it does not support all instructions (like WDT), so it immediately crashes when running the Planck firmware (because `lufa.c` disables the WDT in the first few lines of execution). But it can still be useful in debugging example code and test cases, if you know how to use it.
-
-```
-$ cd ~/src
-$ git clone git://sourceware.org/git/binutils-gdb.git
-$ cd binutils-gdb
-$ mkdir obj-avr
-$ cd obj-avr
-$ ../configure --prefix=$PREFIX --target=avr --build=x86_64-unknown-cygwin --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --disable-nls --enable-static
-$ make
-$ make install
-```
-
-### `simulavr`
-`simulavr` is an AVR simulator.  It runs the complied AVR elfs. `simulavr` does not support the `atmega32u4` device... it does `atmega32` but that is not good enough for the firmware (no PORTE and other things), so you cannot run the Planck firmware. I use it to simulate ideas I have for features in separate test projects.
-
-This one is a major pain in the butt because it has a lot of dependencies and it is buggy.  I will do my best to explain it but... it was hard to figure out. A few things need to be changed in the 'Makefile' to make it work in `cygwin`.
-
-
-```
-$ cd ~/src
-$ git clone https://github.com/Traumflug/simulavr.git
-$ cd simulavr
-$ ./bootstrap
-$ ./configure --prefix=$PREFIX --enable-static --disable-tcl --disable-doxygen-doc
-```
- Edit `src/Makefile.am` now so that `-no-undefined` is included (I did this by removing the SYS_MINGW conditional surrounding `libsim_la_LDFLAGS += -no-undefined` and  `libsimulavr_la_LDFLAGS += -no-undefined \ libsimulavr_la_LIBADD += $(TCL_LIB)`. Also, `$(EXEEXT)` is added after `kbdgentables` in two places.
-
-```
-$ make
-$ make install
-```
-
-
-TODO:
-- git repos for all sources
-- command line magic for cygwin setup
-- better options for `dfu-drivers`

docs/Custom-Quantum-Functions.md

@@ -1,123 +0,0 @@
-A custom keyboard is about more than sending button presses to your computer. QMK has designed hooks to allow you to inject code, override functionality, and otherwise customize how your keyboard responds in different situations. 
-
-## A Word on Keyboards vs Keymap
-
-We have structured QMK as a hierarchy:
-
-* Core
-  * Keyboard/Revision (`_kb`)
-    * Keymap (`_user`)
-
-Each of the functions described below can be defined with a `_kb()` suffix or an `_user()` suffix. We intend for you to use the `_kb()` suffix at the Keyboard/Revision level, while the `_user()` suffix should be used at the Keymap level.
-
-When defining functions at the Keyboard/Revision level it is important that your `_kb()` implementation call `_user()` before executing anything else- otherwise the keymap level function will never be called.
-
-## Matrix Initialization Code
-
-* Keyboard/Revision: `void matrix_init_kb(void)` 
-* Keymap: `void matrix_init_user(void)`
-
-This function gets called when the matrix is initiated. You should use this function to initialize any custom hardware you may have, such as speakers, LED drivers, or other features which need to be setup after the keyboard powers on.
-
-### Example
-
-```
-void matrix_init_kb(void) {
-        // put your keyboard start-up code here
-        // runs once when the firmware starts up
-        matrix_init_user();
-
-        // JTAG disable for PORT F. write JTD bit twice within four cycles.
-        MCUCR |= (1<<JTD);
-        MCUCR |= (1<<JTD);
-
-        // * Set our LED pins as output
-        DDRB |= (1<<0);
-        DDRB |= (1<<1);
-        DDRB |= (1<<2);
-        DDRB |= (1<<3);
-        DDRB |= (1<<4);
-}
-```
-
-## Matrix Scanning Code
-
-* Keyboard/Revision: `void matrix_scan_kb(void)`
-* Keymap: `void matrix_scan_user(void)`
-
-This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot.
-
-You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LED's or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
-
-## Hook Into Key Presses
-
-* Keyboard/Revision: `bool process_record_kb(uint16_t keycode, keyrecord_t *record)` 
-* Keymap: `bool process_record_user(uint16_t keycode, keyrecord_t *record)`
-
-This function gets called every time a key is pressed or released. This is particularly useful when defining custom keys or overriding the behavior of existing keys.
-
-The return value is whether or not QMK should continue processing the keycode - returning `false` stops the execution.
-
-The `keycode` variable is whatever is defined in your keymap, eg `MO(1)`, `KC_L`, etc. and can be switch-cased to execute code whenever a particular code is pressed.
-
-The `record` variable contains infomation about the actual press:
-
-```
-keyrecord_t record {
-  keyevent_t event {
-    keypos_t key {
-      uint8_t col
-      uint8_t row
-    }
-    bool     pressed
-    uint16_t time
-  }
-}
-```
-
-The conditional `if (record->event.pressed)` can tell if the key is being pressed or released, and you can execute code based on that.
-
-## LED Control
-
-* Keyboard/Revision: `void led_set_kb(uint8_t usb_led)` 
-* Keymap: `void led_set_user(uint8_t usb_led)`
-
-This allows you to control the 5 LED's defined as part of the USB Keyboard spec. It will be called when the state of one of those 5 LEDs changes.
-
-* `USB_LED_NUM_LOCK`
-* `USB_LED_CAPS_LOCK`
-* `USB_LED_SCROLL_LOCK`
-* `USB_LED_COMPOSE`
-* `USB_LED_KANA`
-
-### Example:
-
-```
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        PORTB |= (1<<0);
-    } else {
-        PORTB &= ~(1<<0);
-    }
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        PORTB |= (1<<1);
-    } else {
-        PORTB &= ~(1<<1);
-    }
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-        PORTB |= (1<<2);
-    } else {
-        PORTB &= ~(1<<2);
-    }
-    if (usb_led & (1<<USB_LED_COMPOSE_LOCK)) {
-        PORTB |= (1<<3);
-    } else {
-        PORTB &= ~(1<<3);
-    }
-    if (usb_led & (1<<USB_LED_KANA_LOCK)) {
-        PORTB |= (1<<4);
-    } else {
-        PORTB &= ~(1<<4);
-    }
-}
-```

docs/Differences-from-TMK.md

@@ -1,7 +0,0 @@
-Understanding the essential changes made on the [tmk_keyboard firmware](http://github.com/tmk/tmk_keyboard) should help you understand the QMK Firmware.
-
-| Firmware                     |TMK                    |QMK                      |
-|------------------------------|-----------------------|-------------------------|
-| Maintainer                   |hasu  (@tmk)           |Jack Humbert et al.      |
-| Build path customization     | `TMK_DIR = ...`       | `include .../Makefile`  |
-| `keymaps` array data | 3D array of `uint8_t`  holding **keycode**      | 3D array of `uint16_t` holding **keycode**  |

docs/Eclipse.md

@@ -1,84 +0,0 @@
-[Eclipse](https://en.wikipedia.org/wiki/Eclipse_(software)) is an open-source [Integrated Development Environment](https://en.wikipedia.org/wiki/Integrated_development_environment) (IDE) widely used for Java development, but with an extensible plugin system that allows to customize it for other languages and usages.
-
-Using an IDE such as Eclipse provides many advantages over a plain text editor, such as:
-* intelligent code completion
-* convenient navigation in the code
-* refactoring tools
-* build automation (no need for the command-line)
-* a GUI for GIT
-* static code analysis
-* many other tools such as debugging, code formatting, showing call hierarchies etc.
-
-The purpose of the is page is to document how to set-up Eclipse for developing AVR software, and working on the QMK code base.
-
-Note that this set-up has been tested on Ubuntu 16.04 only for the moment.
-
-# Prerequisites
-## Build environment
-Before starting, you must have followed the [Getting Started](/Home.md#getting-started) section corresponding to your system. In particular, you must have been able to build the firmware with [the `make` command](../#the-make-command).
-
-## Java
-Eclipse is a Java application, so you will need to install Java 8 or more recent to be able to run it. You may choose between the JRE or the JDK, the latter being useful if you intend to do Java development.
-
-# Install Eclipse and its plugins
-Eclipse comes in [several flavours](http://www.eclipse.org/downloads/eclipse-packages/) depending on the target usage that you will have. There is no package comprising the AVR stack, so we will need to start from Eclipse CDT (C/C++ Development Tooling) and install the necessary plugins.
-
-## Download and install Eclipse CDT
-If you already have Eclipse CDT on your system, you can skip this step. However it is advised to keep it up-to-date for better support.
-
-If you have another Eclipse package installed, it is normally possible to [install the CDT plugin over it](https://eclipse.org/cdt/downloads.php). However it is probably better to reinstall it from scratch to keep it light and avoid the clutter of tools that you don't need for the projects you will be working on.
-
-Installation is very simple: follow the [5 Steps to Install Eclipse](https://eclipse.org/downloads/eclipse-packages/?show_instructions=TRUE), and choose **Eclipse IDE for C/C++ Developers** at Step 3.
-
-Alternatively, you can also directly [download Eclipse IDE for C/C++ Developers](http://www.eclipse.org/downloads/eclipse-packages/) ([direct link to current version](http://www.eclipse.org/downloads/packages/eclipse-ide-cc-developers/neonr)) and extract the package to the location of your choice (this creates an `eclipse` folder).
-
-## First Launch
-When installation is complete, click the <kbd>Launch</kbd> button. (If you extracted the package manually, open the Eclipse installation folder and double-click the `eclipse` executable)
-
-When you are prompted with the Workspace Selector, select a directory that will hold Eclipse metadata and usually your projects. **Do not select the `qmk_firmware` directory**, this will be the project directory. Select the parent folder instead, or another (preferably empty) folder of your choice (the default is fine if you do not use it yet).
-
-Once started, click the <kbd>Workbench</kbd> button at the top right to switch to the workbench view (there is a also checkbox at the bottom to skip the welcome screen at startup).
-
-## Install the necessary plugins
-Note: you do not need to restart Eclipse after installing each plugin. Simply restart once all plugins are installed.
-
-### [The AVR plugin](http://avr-eclipse.sourceforge.net/)
-This is the most important plugin as it will allow Eclipse to _understand_ AVR C code. Follow [the instructions for using the update site](http://avr-eclipse.sourceforge.net/wiki/index.php/Plugin_Download#Update_Site), and agree with the security warning for unsigned content.
-
-### [ANSI Escape in Console](https://marketplace.eclipse.org/content/ansi-escape-console)
-This plugin is necessary to properly display the colored build output generated by the QMK makefile.
-
-1. Open <kbd><kbd>Help</kbd> > <kbd>Eclipse Marketplace…</kbd></kbd>
-2. Search for _ANSI Escape in Console_
-3. Click the <samp>Install</samp> button of the plugin
-4. Follow the instructions and agree again with the security warning for unsigned content.
-
-Once both plugins are installed, restart Eclipse as prompted.
-
-# Configure Eclipse for QMK
-## Importing the project
-1. Click <kbd><kbd>File</kbd> > <kbd>New</kbd> > <kbd>Makefile Project with Existing Code</kbd></kbd>
-2. On the next screen:
-  * Select the directory where you cloned the repository as _Existing Code Location_;
-  * (Optional) Give a different name to the project¹, e.g. _QMK_ or _Quantum_;
-  * Select the _AVR-GCC Toolchain_;
-  * Keep the rest as-is and click <kbd>Finish</kbd>
-
-  ![Importing QMK in Eclipse](http://i.imgur.com/oHYR1yW.png)
-
-3. The project will now be loaded and indexed. Its files can be browsed easily through the _Project Explorer_ on the left.
-
-¹ There might be issues for importing the project with a custom name. If it does not work properly, try leaving the default project name (i.e. the name of the directory, probably `qmk_firmware`).
-
-## Build your keyboard
-We will now configure a make target that cleans the project and builds the keymap of your choice.
-
-1. On the right side of the screen, select the <kbd>Make Target</kbd> tab
-2. Expand the folder structure to the keyboard of your choice, e.g. `qmk_firmware/keyboards/ergodox`
-3. Right-click on the keyboard folder and select <kbd>New…</kbd> (or select the folder and click the <kbd>New Make Target</kbd> icon above the tree)
-4. Choose a name for your build target, e.g. _clean \<your keymap\>_
-5. Make Target: this is the arguments that you give to `make` when building from the command line. If your target name does not match these arguments, uncheck <kbd>Same as target name</kbd> and input the correct arguments, e.g. `clean <your keymap>`
-6. Leave the other options checked and click <kbd>OK</kbd>. Your make target will now appear under the selected keyboard.
-7. (Optional) Toggle the <kbd>Hide Empty Folders</kbd> icon button above the targets tree to only show your build target.
-8. Double-click the build target you created to trigger a build.
-9. Select the <kbd>Console</kbd> view at the bottom to view the running build.

docs/Embedding.md

@@ -1,64 +0,0 @@
-# WARNING: Until issue [#173](https://github.com/tmk/tmk_keyboard/issues/173) goes through, the [core][1] repository will not be up-to-date with the latest changes and fixes, but can still be used.
-
-If you want to use TMK for your own keyboard project, you've got three options for embedding the [core][1].  
-The recommended option is [subtrees](#1-git-subtree).
-
-After adding the embed you'll need to [modify the Makefile](#modifications-to-the-makefile) of your project to point to the core correctly.
-
-## 1. git subtree
-
-In order to set up the subtree in your project, first add the core repository as a remote:  
-```
-git remote add -f core https://github.com/tmk/tmk_core
-```
-
-Then add the core as a subtree (directory) in your local repository:  
-```
-git subtree add -P tmk_core core master --squash
-```
-
-And that's it!
-
-When you want to update the subtree in your repository to match the master on [tmk_core][1], do this:  
-```
-git subtree pull -P tmk_core core master --squash
-```
-
-## 2. git submodule
-
-In order to set up the submodule in your project, first add a new submodule:  
-```
-git submodule add https://github.com/tmk/tmk_core tmk_core
-```
-
-Then pull, sync and update the submodule:  
-```
-git pull
-git submodule sync --recursive
-git submodule update --init --recursive
-```
-
-And that's it!
-
-When you want to update the subtree in your repository to match the master on [tmk_core][1], follow the same steps as above.
-
-If you want to clone a repository from GitHub that has submodule(s) in it, pass <kbd>--recursive</kbd> when cloning, like so:  
-`git clone --recursive https://github.com/<username>/<repository>`
-
-## 3. Manually (without git)
-
-*Note: This is not recommended in any way, but it's still possible.*
-
-Download a zipped version of the [tmk_core][1] repository using this link:  
-<https://github.com/tmk/tmk_core/archive/master.zip>
-
-Extract the zip in your project's directory, then rename the folder to <kbd>tmk_core</kbd>.
-
-## Modifications to the *Makefile*
-
-The one thing you have to make sure to change in the *Makefile* (compared to [tmk_keyboard](https://github.com/tmk/tmk_keyboard) drivers' *[Makefile](https://github.com/tmk/tmk_keyboard/blob/master/keyboard/gh60/Makefile#L45)*) is the "TMK_DIR" variable, which needs to point to the embed directory:  
-```Makefile
-TMK_DIR = ./tmk_core
-```
-
-[1]: https://github.com/tmk/tmk_core

docs/FAQ-Build.md

@@ -1,151 +0,0 @@
-## READ FIRST
-- https://github.com/jackhumbert/qmk_firmware/blob/master/doc/BUILD_GUIDE.md
-
-In short,
-
-    $ make [-f Makefile.<variant>] [KEYMAP=...] clean
-    $ make [-f Makefile.<variant>] [KEYMAP=...]
-    $ make [-f Makefile.<variant>] [KEYMAP=...] dfu
-
-
-## Can't program on Linux and Mac
-You will need proper permission to operate a device. For Linux users see udev rules below.
-Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
-
-https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man8/sudo.8.html
-
-In short when your controller is ATMega32u4,
-    
-    $ sudo dfu-programmer atmega32u4 erase --force
-    $ sudo dfu-programmer atmega32u4 flash your.hex
-    $ sudo dfu-programmer atmega32u4 reset
-
-or just
-
-    $ sudo make dfu
-
-But to run `make` with root privilege is not good idea. Use former method as possible.
-
-## Do 'make clean' before 'make'
-You'll need `make clean` after you edit **config.h** or change options like `KEYMAP`.
-
-Frist remove all files made in previous build,
-
-    $ make clean
-
-then build new firmware. 
-
-    $ make [KEYMAP=...]
-
-Also you can always try `make clean` when you get other strange result during build.
-
-
-## WINAVR is obsolete
-It is no longer recommended and may cause some problem.
-See [Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
-
-## USB stack: LUFA or PJRC?
-Use **LUFA**.
-
-**PJRC** stack won't be supported actively anymore. There is no reason to hesitate to use LUFA except for binary size(about 1KB lager?). But **PJRC** is still very useful for debug and development purpose.
-See also [Issue #50](https://github.com/tmk/tmk_keyboard/issues/50) and [Issue #58](https://github.com/tmk/tmk_keyboard/issues/58).
-
-## Edit configuration but not change
-You will need followings after editing `CONSOLE_ENABLE`, `NKRO_ENABLE`, `EXTRAKEY_ENABLE` or `MOUSEKEY_ENABLE` option in **Makefile**.
-
-### 1. make clean
-This will be needed when you edit **config.h**.
-
-### 2. Remove Drivers from Device Manager(Windows)
-**Windows only.** Linux, OSX and other OS's doesn't require this. It looks like Windows keeps using driver installed when device was connected first time even after the device changes its configuration. To load proper drivers for new configuration you need to remove existent drivers from **Drvice Manager**.
-
-### 3. Build with different VID:PID
-**Windows only.** If method 2. does't work fou you try this. Change Vendor ID or Product ID in **config.h** and build firmware. Windows should recognize it as whole new device and start drivers install process.
-
-### 4. Just try other ports
-This will be useful and the easiest workaround for **Windows**.
-
-
-
-## USB VID and PID
-You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very least chance of collision with other product.
-
-For example TMK uses following numbers by default.
-```
-keyboard:
-hhkb: FEED:CAFE
-gh60: FEED:6060
-
-converter:
-x68k: FEED:6800
-ps2: FEED:6512
-adb: FEED:0ADB
-ibm4704: FEED:4704
-pc98: FEED:9898
-```
-
-Also see this.
-https://github.com/tmk/tmk_keyboard/issues/150
-
-You can buy a really unique VID:PID here. I don't think you need this for personal use.
-- http://www.obdev.at/products/vusb/license.html
-- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
-
-
-## Linux udev rules
-On Linux you need proper privilege to access device file of MCU, you'll have to use `sudo` when flashing firmware. You can circumvent this with placing these files in `/etc/udev/rules.d/`.
-
-**/etc/udev/rules.d/50-atmel-dfu.rules:**
-```
-# Atmel ATMega32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", MODE:="0666"
-# Atmel USBKEY AT90USB1287
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", MODE:="0666"
-# Atmel ATMega32U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="0666"
-```
-
-**/etc/udev/rules.d/52-tmk-keyboard.rules:**
-```
-# tmk keyboard products     https://github.com/tmk/tmk_keyboard
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
-```
-
-
-
-## Cortex: cstddef: No such file or directory
-GCC 4.8 of Ubuntu 14.04 had this problem and had to update to 4.9 with this PPA.
-https://launchpad.net/~terry.guo/+archive/ubuntu/gcc-arm-embedded
-
-https://github.com/tmk/tmk_keyboard/issues/212
-https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef
-https://developer.mbed.org/forum/mbed/topic/5205/
-
-
-## 'clock_prescale_set' and 'clock_div_1' not available
-Your toolchain is too old to support the MCU. For example WinAVR 20100110 doesn't support ATMega32u2.
-
-```
-Compiling C: ../../tmk_core/protocol/lufa/lufa.c
-avr-gcc -c -mmcu=atmega32u2 -gdwarf-2 -DF_CPU=16000000UL -DINTERRUPT_CONTROL_ENDPOINT -DBOOTLOADER_SIZE=4096 -DF_USB=16000000UL -DARCH=ARCH_AVR8 -DUSB_DEVICE_ONLY -DUSE_FLASH_DESCRIPTORS -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -DFIXED_CONTROL_ENDPOINT_SIZE=8  -DFIXED_NUM_CONFIGURATIONS=1 -DPROTOCOL_LUFA -DEXTRAKEY_ENABLE -DCONSOLE_ENABLE -DCOMMAND_ENABLE -DVERSION=unknown -Os -funsigned-char -funsigned-bitfields -ffunction-sections -fdata-sections -fno-inline-small-functions -fpack-struct -fshort-enums -fno-strict-aliasing -Wall -Wstrict-prototypes -Wa,-adhlns=obj_alps64/protocol/lufa/lufa.lst -I. -I../../tmk_core -I../../tmk_core/protocol/lufa -I../../tmk_core/protocol/lufa/LUFA-git -I../../tmk_core/common -std=gnu99 -include config.h -MMD -MP -MF .dep/obj_alps64_protocol_lufa_lufa.o.d  ../../tmk_core/protocol/lufa/lufa.c -o obj_alps64/protocol/lufa/lufa.o
-../../tmk_core/protocol/lufa/lufa.c: In function 'setup_mcu':
-../../tmk_core/protocol/lufa/lufa.c:575: warning: implicit declaration of function 'clock_prescale_set'
-../../tmk_core/protocol/lufa/lufa.c:575: error: 'clock_div_1' undeclared (first use in this function)
-../../tmk_core/protocol/lufa/lufa.c:575: error: (Each undeclared identifier is reported only once
-../../tmk_core/protocol/lufa/lufa.c:575: error: for each function it appears in.)
-make: *** [obj_alps64/protocol/lufa/lufa.o] Error 1
-```
-
-
-## BOOTLOADER_SIZE for AVR
-Note that Teensy2.0++ bootloader size is 2048byte. Some Makefiles may have wrong comment.
-
-```
-# Boot Section Size in *bytes*    
-#   Teensy halfKay   512          
-#   Teensy++ halfKay 2048         
-#   Atmel DFU loader 4096       (TMK Alt Controller)
-#   LUFA bootloader  4096         
-#   USBaspLoader     2048         
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
-```

docs/FAQ-Keymap.md

@@ -1,248 +0,0 @@
-## READ FIRST
-https://github.com/tmk/tmk_core/blob/master/doc/keymap.md
-
-## How to get keycode
-See [Keycodes](Keycodes). Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h).
-
-## Sysrq key
-Use keycode for Print Screen(`KC_PSCREEN` or `KC_PSCR`) instead of `KC_SYSREQ`. Key combination of 'Alt + Print Screen' is recognized as 'System request'.
-
-See [issue #168](https://github.com/tmk/tmk_keyboard/issues/168) and
-- http://en.wikipedia.org/wiki/Magic_SysRq_key
-- http://en.wikipedia.org/wiki/System_request
-
-## Power key doesn't work
-Use `KC_PWR` instead of `KC_POWER` or vice versa.
-- `KC_PWR` works with Windows and Linux, not with OSX.
-- `KC_POWER` works with OSX and Linux, not with Windows.
-
-http://geekhack.org/index.php?topic=14290.msg1327264#msg1327264
-
-## Oneshot modifier
-Solves my personal 'the' problem. I often got 'the' or 'THe' wrongly instead of 'The'.  Oneshot Shift mitgates this for me.
-https://github.com/tmk/tmk_keyboard/issues/67
-
-## Modifier/Layer stuck
-Modifier keys or layers can be stuck unless layer switching is configured properly.
-For Modifier keys and layer actions you have to place `KC_TRANS` on same position of destination layer to  unregister the modifier key or return to previous layer on release event.
-
-- https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#31-momentary-switching
-- http://geekhack.org/index.php?topic=57008.msg1492604#msg1492604
-- https://github.com/tmk/tmk_keyboard/issues/248
-
-
-## Mechanical Lock Switch Support
-https://github.com/tmk/tmk_keyboard#mechanical-locking-support
-
-This feature is for *mechanical lock switch* like this Alps one.
-http://deskthority.net/wiki/Alps_SKCL_Lock
-
-Using enabling this feature and using keycodes `LCAP`, `LNUM` or `LSCR` in keymap you can use physical locking CapsLock, NumLock or ScrollLock keys as you expected.
-
-Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `CAPS`, `NLCK` and `SLCK`.***
-
-
-## Input special charactors other than ASCII like Cédille 'Ç'
-NO UNIVERSAL METHOD TO INPUT THOSE WORKS OVER ALL SYSTEMS. You have to define **MACRO** in way specific to your OS or layout.
-
-See this post for example **MACRO** code.
-
-http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620
-
-On **Windows** you can use `AltGr` key or **Alt code**.
-- http://en.wikipedia.org/wiki/AltGr_key
-- http://en.wikipedia.org/wiki/Alt_code
-
-On **Mac** OS defines `Option` key combinations.
-- http://en.wikipedia.org/wiki/Option_key#Alternative_keyboard_input
-
-On **Xorg** you can use `compose` key, instead.
-- http://en.wikipedia.org/wiki/Compose_key
-
-And see this for **Unicode** input.
-- http://en.wikipedia.org/wiki/Unicode_input
-
-
-## Apple/Mac keyboard Fn
-Not supported.
-
-Apple/Mac keyboard sends keycode for Fn unlike most of other keyboards.
-I think you can send Apple Fn key using Apple venter specific Page 0xff01 and usage 0x0003. But you have to change HID Report Descriptor for this, of course.
-
-https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/AppleHIDUsageTables.h
-
-
-## Media control keys in Mac OSX
-#### KC_MNXT and KC_MPRV does not work on Mac
-Use `KC_MFFD`(`KC_MEDIA_FAST_FORWARD`) and `KC_MRWD`(`KC_MEDIA_REWIND`) instead of `KC_MNXT` and `KC_MPRV`.
-See https://github.com/tmk/tmk_keyboard/issues/195
-
-
-## Keys supported in Mac OSX?
-You can know which keycodes are supported in OSX from this source code.
-
-`usb_2_adb_keymap` array maps Keyboard/Keypad Page usages to ADB scancodes(OSX internal keycodes).
-
-https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/Cosmo_USB2ADB.c
-
-And `IOHIDConsumer::dispatchConsumerEvent` handles Consumer page usages.
-
-https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/IOHIDConsumer.cpp
-
-
-## JIS keys in Mac OSX
-Japanese JIS keyboard specific keys like `無変換(Muhenkan)`, `変換(Henkan)`, `ひらがな(hiragana)` are not recognized on OSX. You can use **Seil** to enable those keys, try following options.
-
-* Enable NFER Key on PC keyboard
-* Enable XFER Key on PC keyboard
-* Enable KATAKANA Key on PC keyboard
-
-https://pqrs.org/osx/karabiner/seil.html
-
-
-## RN-42 Bluetooth doesn't work with Karabiner
-Karabiner - Keymapping tool on Mac OSX - ignores inputs from RN-42 module by default. You have to enable this option to make Karabiner working with your keyboard.
-https://github.com/tekezo/Karabiner/issues/403#issuecomment-102559237
-
-See these for the deail of this problem.
-https://github.com/tmk/tmk_keyboard/issues/213
-https://github.com/tekezo/Karabiner/issues/403
-
-
-## Esc and `~ on a key
-
-
-You can define FC660 and Poker style ESC with `ACTION_LAYER_MODS`.
-https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#35-momentary-switching-with-modifiers
-
-```
-#include "keymap_common.h"
-
-
-/* Leopold FC660
- * https://elitekeyboards.com/products.php?sub=leopold,compact&pid=fc660c
- * Shift + Esc = ~
- * Fn    + Esc = `
- *
- * Votex Poker II
- * https://adprice.fedorapeople.org/poker2_manual.pdf
- * Fn         + Esc = `
- * Fn + Shift + Esc = ~
- */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    [0] = KEYMAP( \
-        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS,BSPC, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
-        LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \
-        FN0, NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RSFT,ESC, \
-        LCTL,LGUI,LALT,          SPC,                     RALT,FN1, RGUI,RCTL),
-    [1] = KEYMAP( \
-        GRV, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,          TRNS,                    TRNS,TRNS,TRNS,TRNS),
-    [2] = KEYMAP( \
-        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,          TRNS,                    TRNS,TRNS,TRNS,TRNS),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    // https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#35-momentary-switching-with-modifiers
-    [0] = ACTION_LAYER_MODS(1, MOD_LSFT),
-    [1] = ACTION_LAYER_MOMENTARY(2),
-};
-```
-
-Otherwise, you can write code, see this.
-https://github.com/p3lim/keyboard_firmware/commit/fd799c12b69a5ab5addd1d4c03380a1b8ef8e9dc
-
-
-## 32 Fn keys are not enough?
-### actionmap
-It uses 16 bit codes and has no limitation of 32 Fn at the expense of memory space. TMK keymap is actually is 8 bit codes as subset of the actionmap.
-https://github.com/tmk/tmk_keyboard/issues?utf8=%E2%9C%93&q=is%3Aissue+actionmap
-
-### extension for modified keys
-https://geekhack.org/index.php?topic=41989.msg1885526#msg1885526
-
-
-## Arrow on Right Modifier keys with Dual-Role
-This turns right modifer keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed **TAP**.
-```
-#include "keymap_common.h"
-
-
-/* Arrow keys on right modifier keys with TMK dual role feature
- *
- *  https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role
- *  https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
- */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    [0] = KEYMAP( \
-        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS,BSPC, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
-        LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \
-        LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,FN0, ESC, \
-        FN4, LGUI,LALT,          SPC,                     APP, FN2, FN1, FN3),
-    [1] = KEYMAP( \
-        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \
-        TRNS,TRNS,TRNS,          TRNS,                    TRNS,FN7, FN6, FN8),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
-    [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
-    [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
-    [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
-    [4] = ACTION_LAYER_MOMENTARY(1),
-    [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP),
-    [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN),
-    [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME),
-    [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END),
-};
-
-```
-
-
-Dual-role key: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
-
-
-## Eject on Mac OSX
-`EJCT` keycode works on OSX. https://github.com/tmk/tmk_keyboard/issues/250
-It seems Windows 10 ignores the code and Linux/Xorg recognizes but has no mapping by default.
-
-Not sure what keycode Eject is on genuine Apple keyboard actually. HHKB uses `F20` for Eject key(`Fn+f`) on Mac mode but this is not same as Apple Eject keycode probably.
-
-
-
-## What's weak_mods and real_mods in action_util.c
-___TO BE IMPROVED___
-
-real_mods is intended to retains state of real/physical modifier key state, while
-weak_mods retains state of virtual or temprary modifiers which should not affect state real modifier key.
-
-Let's say you hold down physical left shift key and type ACTION_MODS_KEY(LSHIFT, KC_A), 
-
-with weak_mods,
-* (1) hold down left shift: real_mods |= MOD_BIT(LSHIFT)
-* (2) press ACTION_MODS_KEY(LSHIFT, KC_A): weak_mods |= MOD_BIT(LSHIFT)
-* (3) release ACTION_MODS_KEY(LSHIFT, KC_A): waek_mods &= ~MOD_BIT(LSHIFT)
-real_mods still keeps modifier state.
-
-without weak mods,
-* (1) hold down left shift: real_mods |= MOD_BIT(LSHIFT)
-* (2) press ACTION_MODS_KEY(LSHIFT, KC_A): real_mods |= MOD_BIT(LSHIFT)
-* (3) release ACTION_MODS_KEY(LSHIFT, KC_A): real_mods &= ~MOD_BIT(LSHIFT)
-here real_mods lost state for 'physical left shift'.
-
-weak_mods is ORed with real_mods when keyboard report is sent.
-https://github.com/tmk/tmk_core/blob/master/common/action_util.c#L57

docs/FAQ.md

@@ -1,238 +0,0 @@
-## READ FIRST
-- **README** of top directory : https://github.com/tmk/tmk_keyboard/blob/master/README.md
-- **README** of target project(keyboard/converter) directory.
-
-Note that you'll need to read **both**.
-
-
-# Build
-- [[FAQ/Build]]
-
-
-# Keymap
-- [[FAQ/Keymap]]
-
-
-# Debug Console
-## hid_listen can't recognize device
-When debug console of your device is not ready you will see like this:
-
-    Waiting for device:.........
-
-once the device is pluged in then *hid_listen* finds it you will get this message:
-
-    Waiting for new device:.........................
-    Listening:
-
-Check if you can't get this 'Listening:' message:
-- build with `CONSOLE_ENABLE=yes` in **Makefile**.
-
-You may need privilege to access the device on OS like Linux.
-- try `sudo hid_listen`
-
-## Can't get message on console
-Check:
-- *hid_listen* finds your device. See above.
-- Enable debug with pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
-- set `debug_enable=true` usually in `matrix_init()` in **matrix.c**.
-- try using 'print' function instead of debug print. See **common/print.h**.
-- disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
-
-## Linux or UNIX like system requires Super User privilege
-Just use 'sudo' to execute *hid_listen* with privilege.
-```
-$ sudo hid_listen
-```
-
-Or add an *udev rule* for TMK devices with placing a file in rules directory. The directory may vary on each system.
-
-File: /etc/udev/rules.d/52-tmk-keyboard.rules(in case of Ubuntu)
-```
-# tmk keyboard products     https://github.com/tmk/tmk_keyboard
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
-```
-
-***
-
-# Miscellaneous
-## NKRO Doesn't work
-First you have to compile frimware with this build option `NKRO_ENABLE` in **Makefile**.
-
-Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work you need to switch to **6KRO** mode, in particular when you are in BIOS.
-
-If your firmeare built with `BOOTMAGIC_ENABLE` you need to turn its switch on by `BootMagic` **N** command(`Space+N` by default). This setting is stored in EEPROM and keeped over power cycles.
-
-https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch
-
-
-## TrackPoint needs reset circuit(PS/2 mouse support)
-Without reset circuit you will have inconsistent reuslt due to improper initialize of the hardware. See circuit schematic of TPM754.
-
-- http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447
-- http://www.mikrocontroller.net/attachment/52583/tpm754.pdf
-
-
-## Can't read column of matrix beyond 16 
-Use `1UL<<16` instead of `1<<16` in `read_cols()` in **matrix.h** when your columns goes beyond 16.
-
-In C `1` means one of **int** type which is **16bit** in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use **unsigned long** type with `1UL`.
-
-http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
-
-
-
-## Pull-up Resistor
-In some case converters needed to have pull-up resistors to work correctly. Place the resistor between VCC and signal line in parallel.
-
-For example:
-```
-Keyboard       Conveter
-               ,------.
-5V------+------|VCC   |
-        |      |      |
-        R      |      |
-        |      |      |
-Signal--+------|PD0   |
-               |      |
-GND------------|GND   |
-               `------'
-R: 1K Ohm resistor
-```
-
-https://github.com/tmk/tmk_keyboard/issues/71
-
-
-## Arduino Micro's pin naming is confusing
-Note that Arduino Micro PCB marking is different from real AVR port name. D0 of Arduino Micro is not PD0, PD0 is D3. Check schematic yourself.
-http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf
-
-
-
-## Bootloader jump doesn't work
-Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**.
-```
-# Size of Bootloaders in bytes:
-#   Atmel DFU loader(ATmega32U4)   4096    
-#   Atmel DFU loader(AT90USB128)   8192    
-#   LUFA bootloader(ATmega32U4)    4096             
-#   Arduino Caterina(ATmega32U4)   4096             
-#   USBaspLoader(ATmega***)        2048             
-#   Teensy   halfKay(ATmega32U4)   512              
-#   Teensy++ halfKay(AT90USB128)   2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-```
-AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet.
-Note that **Word**(2 bytes) size and address are used in datasheet while TMK uses **Byte**.
-
-AVR Boot section is located at end of Flash memory like the followings.
-```
-byte     Atmel/LUFA(ATMega32u4)          byte     Atmel(AT90SUB1286)
-0x0000   +---------------+               0x00000  +---------------+
-         |               |                        |               |
-         |               |                        |               |
-         |  Application  |                        |  Application  |
-         |               |                        |               | 
-         =               =                        =               =
-         |               | 32KB-4KB               |               | 128KB-8KB
-0x6000   +---------------+               0x1E000  +---------------+
-         |  Bootloader   | 4KB                    |  Bootloader   | 8KB
-0x7FFF   +---------------+               0x1FFFF  +---------------+
-
- 
-byte     Teensy(ATMega32u4)              byte     Teensy++(AT90SUB1286)
-0x0000   +---------------+               0x00000  +---------------+
-         |               |                        |               |
-         |               |                        |               |
-         |  Application  |                        |  Application  |
-         |               |                        |               |
-         =               =                        =               =
-         |               | 32KB-512B              |               | 128KB-2KB
-0x7E00   +---------------+               0x1FC00  +---------------+
-         |  Bootloader   | 512B                   |  Bootloader   | 2KB
-0x7FFF   +---------------+               0x1FFFF  +---------------+
-```
-
-And see this discussion for further reference.
-https://github.com/tmk/tmk_keyboard/issues/179
-
-
-## Special Extra key doesn't work(System, Audio control keys)
-You need to define `EXTRAKEY_ENABLE` in **makefile** to use them in TMK.
-```
-EXTRAKEY_ENABLE = yes          # Audio control and System control
-```
-http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-60.html#p157919
-
-
-## Wakeup from sleep doesn't work
-In Windows check `Allow this device to wake the computer` setting in Power **Management property** tab of **Device Manager**. Also check BIOS setting.
-
-Pressing any key during sleep should wake host.
-
-
-## Using Arduino?
-**Note that Arduino pin naming is different from actual chip.** For example, Arduino pin `D0` is not `PD0`. Check circuit with its schematics yourself.
-
-- http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf
-- http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf
-
-Arduino leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem.
-
-
-## Using PF4-7 pins of USB AVR?
-You need to set JTD bit of MCUCR yourself to use PF4-7 as GPIO. Those pins are configured to serve JTAG function by default. MCUs like ATMega*U* or AT90USB* are affeteced with this.
-
-If you are using Teensy this isn't needed. Teensy is shipped with JTAGEN fuse bit unprogrammed to disable the function.
-
-See this code.
-```
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
-```
-https://github.com/tmk/tmk_keyboard/blob/master/keyboard/hbkb/matrix.c#L67
-
-And read **26.5.1 MCU Control Register – MCUCR** of ATMega32U4 datasheet.
-
-
-## Adding LED indicators of Lock keys
-You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post.
-
-http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560
-
-## Program Arduino Micro/Leonardo
-Push reset button and then run command like this within 8 seconds.
-
-```
-avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0
-```
-
-Device name will vary depending on your system.
-
-http://arduino.cc/en/Main/ArduinoBoardMicro
-https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
-
-
-## USB 3 compatibility
-I heard some people have a problem with USB 3 port, try USB 2 port.
-
-
-## Mac compatibility
-### OS X 10.11 and Hub
-https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034
-
-
-## Problem on BIOS(UEFI)/Resume(Sleep&Wake)/Power cycles
-Some people reported their keyboard stops working on BIOS and/or after resume(power cycles).
-
-As of now root of its cause is not clear but some build options seem to be related. In Makefile try to disable those options like `CONSOLE_ENABLE`, `NKRO_ENABLE`, `SLEEP_LED_ENABLE` and/or others. 
-
-https://github.com/tmk/tmk_keyboard/issues/266
-https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778
-
-
-
-## FLIP doesn't work
-### AtLibUsbDfu.dll not found
-Remove current driver and reinstall one FLIP provides from DeviceManager.
-http://imgur.com/a/bnwzy

docs/Git-subtree.md

@@ -1,7 +0,0 @@
-## Update core branch procedure
-    git co master
-    git subtree split -P tmk_core -b <tmp_branch>
-    git co core
-    git merge <tmp_branch>
-    git co master
-    git subtree merge -P tmk_core --squash

docs/HAND_WIRE.md

@@ -1,321 +0,0 @@
-# Quantum Hand-wiring Guide
-
-Parts list:
-* *x* keyswitches (MX, Matias, Gateron, etc)
-* *x* diodes
-* Keyboard plate (metal, plastic, cardboard, etc)
-* Wire (strained for wiring to the Teensy, anything for the rows/columns)
-* Soldering iron set at 600ºF or 315ºC (if temperature-controlled)
-* Resin-cored solder (leaded or lead-free)
-* Adequate ventilation/a fan
-* Tweezers (optional)
-* Wire cutters/snippers
-
-## How the matrix works (why we need diodes)
-
-The microcontroller (in this case, the Teensy 2.0) will be setup up via the firmware to send a logical 1 to the columns, one at a time, and read from the rows, all at once - this process is called matrix scanning. The matrix is a bunch of open switches that, by default, don't allow any current to pass through - the firmware will read this as no keys being pressed. As soon as you press one key down, the logical 1 that was coming from the column the keyswitch is attached to gets passed through the switch and to the corresponding row - check out the following 2x2 example:
-
-        Column 0 being scanned     Column 1 being scanned
-                  x                                   x
-                 col0     col1              col0     col1
-                  |        |                 |        |
-        row0 ---(key0)---(key1)    row0 ---(key0)---(key1)
-                  |        |                 |        |
-        row1 ---(key2)---(key3)    row1 ---(key2)---(key3)
-
-The `x` represents that the column/row associated has a value of 1, or is HIGH. Here, we see that no keys are being pressed, so no rows get an `x`. For one keyswitch, keep in mind that one side of the contacts is connected to its row, and the other, its column.
-
-When we press `key0`, `col0` gets connected to `row0`, so the values that the firmware receives for that row is `0b01` (the `0b` here means that this is a bit value, meaning all of the following digits are bits - 0 or 1 - and represent the keys in that column). We'll use this notation to show when a keyswitch has been pressed, to show that the column and row are being connected:
-
-        Column 0 being scanned     Column 1 being scanned
-                  x                                   x
-                 col0     col1              col0     col1
-                  |        |                 |        |
-      x row0 ---(-+-0)---(key1)    row0 ---(-+-0)---(key1)
-                  |        |                 |        |
-        row1 ---(key2)---(key3)    row1 ---(key2)---(key3)
-
-We can now see that `row0` has an `x`, so has the value of 1. As a whole, the data the firmware receives when `key0` is pressed is
-
-    col0: 0b01
-    col1: 0b00
-            │└row0
-            └row1
-
-A problem arises when you start pressing more than one key at a time. Looking at our matrix again, it should become pretty obvious:
-
-        Column 0 being scanned     Column 1 being scanned
-                  x                                   x
-                 col0     col1              col0     col1
-                  |        |                 |        |
-      x row0 ---(-+-0)---(-+-1)  x row0 ---(-+-0)---(-+-1)
-                  |        |                 |        |
-      x row1 ---(key2)---(-+-3)  x row1 ---(key2)---(-+-3)
-
-      Remember that this ^ is still connected to row1
-
-The data we get from that is:
-
-    col0: 0b11
-    col1: 0b11
-            │└row0
-            └row1
-
-Which isn't accurate, since we only have 3 keys pressed down, not all 4. This behavior is called ghosting, and only happens in odd scenarios like this, but can be much more common on a bigger keyboard. The way we can get around this is by placing a diode after the keyswitch, but before it connects to its row. A diode only allows current to pass through one way, which will protect our other columns/rows from being activated in the previous example. We'll represent a dioded matrix like this;
-
-        Column 0 being scanned     Column 1 being scanned
-                    x                                   x
-                  col0      col1              col0     col1
-                    │        │                 |        │
-                 (key0)   (key1)            (key0)   (key1)
-                  ! │      ! │               ! |      ! │
-        row0 ─────┴────────┘ │     row0 ─────┴────────┘ │
-                    │        │                 |        │
-                 (key2)   (key3)            (key2)   (key3)
-                  !        !                 !        !
-        row1 ─────┴────────┘       row1 ─────┴────────┘
-
-In practical applications, the black line of the diode will be placed facing the row, and away from the keyswitch - the `!` in this case is the diode, where the gap represents the black line. A good way to remember this is to think of this symbol: `>|`
-
-Now when we press the three keys, invoking what would be a ghosting scenario:
-
-        Column 0 being scanned     Column 1 being scanned
-                    x                                   x
-                  col0      col1              col0     col1
-                    │        │                 │        │
-                 (┌─┤0)   (┌─┤1)            (┌─┤0)   (┌─┤1)
-                  ! │      ! │               ! │      ! │
-      x row0 ─────┴────────┘ │   x row0 ─────┴────────┘ │
-                    │        │                 │        │
-                 (key2)   (┌─┘3)            (key2)   (┌─┘3)
-                  !        !                 !        !
-        row1 ─────┴────────┘     x row1 ─────┴────────┘
-
-Things act as they should! Which will get us the following data:
-
-    col0: 0b01
-    col1: 0b11
-            │└row0
-            └row1
-
-The firmware can then use this correct data to detect what it should do, and eventually, what signals it needs to send to the OS.
-
-## The actual hand-wiring
-
-### Getting things in place
-
-When starting this, you should have all of your stabilisers and keyswitches already installed (and optionally keycaps). If you're using a Cherry-type stabiliser (plate-mounted only, obviously), you'll need to install that before your keyswitches. If you're using Costar ones, you can installed them afterwards.
-
-To make things easier on yourself, make sure all of the keyswitches are oriented the same way (if they can be - not all layouts support this). Despite this, it's important to remember that the contacts on the keyswitches are completely symmetrical. We'll be using the keyswitch's left side contact for wiring the rows, and the right side one for wiring the columns.
-
-Get your soldering iron heated-up and collect the rest of the materials from the part list at the beginning of the guide. Place your keyboard so that the bottoms of the keyswitches are accessible - it may be a good idea to place it on a cloth to protect your keyswitches/keycaps.
-
-Before continuing, plan out where you're going to place your Teensy. If you're working with a board that has a large (6.25u) spacebar, it may be a good idea to place it in-between switches against the plate. Otherwise, you may want to trim some of the leads on the keyswitches where you plan on putting it - this will make it a little harder to solder the wire/diodes, but give you more room to place the Teensy.
-
-### Preparing the diodes
-
-It's a little easier to solder the diodes in place if you bend them at a 90º angle immediately after the black line - this will help to make sure you put them on the right way (direction matters), and in the correct position. The diodes will look like this when bent (with longer leads):
-
-       ┌─────┬─┐
-    ───┤     │ ├─┐
-       └─────┴─┘ │
-                 │
-
-We'll be using the long lead at the bent end to connect it to the elbow (bent part) of the next diode, creating the row.
-
-### Soldering the diodes
-
-Starting at the top-left switch, place the diode (with tweezers if you have them) on the switch so that the diode itself is vertically aligned, and the black line is facing toward you. The straight end of the diode should be touching the left contact on the switch, and the bent end should be facing to the right and resting on the switch there, like this:
-
-     │o
-    ┌┴┐         o
-    │ │    O
-    ├─┤      
-    └┬┘
-     └─────────────
-
-Letting the diode rest, grab your solder, and touch both it and the soldering iron to the left contact at the same time - the rosin in the solder should make it easy for the solder to flow over both the diode and the keyswitch contact. The diode may move a little, and if it does, carefully position it back it place by grabbing the bent end of the diode - the other end will become hot very quickly. If you find that it's moving too much, using needle-nose pliers of some sort may help to keep the diode still when soldering.
-
-The smoke that the rosin releases is harmful, so be careful not to breath it or get it in your eyes/face.
-
-After soldering things in place, it may be helpful to blow on the joint to push the smoke away from your face, and cool the solder quicker. You should see the solder develop a matte (not shiney) surface as it solidifies. Keep in mind that it will still be very hot afterwards, and will take a couple minutes to be cool to touch. Blow on it will accelerate this process.
-
-When the first diode is complete, the next one will need to be soldered to both the keyswitch, and the previous diode at the new elbow. That will look something like this:
-
-     │o               │o
-    ┌┴┐         o    ┌┴┐         o
-    │ │    O         │ │    O
-    ├─┤              ├─┤      
-    └┬┘              └┬┘
-     └────────────────┴─────────────
-
-After completing a row, use the wire cutters to trim the excess wire from the tops of the diodes, and from the right side on the final switch. This process will need to completed for each row you have.
-
-When all of the diodes are completely soldered, it's a good idea to quickly inspect each one to ensure that your solder joints are solid and sturdy - repairing things after this is possible, but more difficult.
-
-### Soldering the columns
-
-You'll have some options in the next process - it's a good idea to insulate the column wires (since the diodes aren't), but if you're careful enough, you can use exposed wires for the columns - it's not recommended, though. If you're using single-cored wire, stripping the plastic off of the whole wire and feeding it back on is probably the best option, but can be difficult depending on the size and materials. You'll want to leave parts of the wire exposed where you're going to be solder it onto the keyswitch.
-
-If you're using stranded wire, it's probably easiest to just use a lot of small wires to connect each keyswitch along the column. It's possible to use one and melt through the insulation, but this isn't recommended, will produce even more harmful fumes, and can ruin your soldering iron.
-
-Before beginning to solder, it helps to have your wire pre-bent (if using single-cored), or at least have an idea of how you're going to route the column (especially if you're making a staggered board). Where you go in particular doesn't matter too much, as we'll be basing our keymap definitions on how it was wired - just make sure every key in a particular row is in a unique column, and that they're in order from left to right.
-
-If you're not using any insulation, you can try to keep the column wires elevated, and solder them near the tips of the keyswitch contacts - if the wires are sturdy enough, they won't short out to the row wiring an diodes.
-
-### Wiring things to the Teensy
-
-Now that the matrix itself is complete, it's time to connect what you've done to the Teensy. You'll be needing the number of pins equal to your number of columns + your number of rows. There are some pins on the Teensy that are special, like D6 (the LED on the chip), or some of the UART, SPI, I2C, or PWM channels, but only avoid those if you're planning something in addition to a keyboard. If you're unsure about wanting to add something later, you should have enough pins in total to avoid a couple.
-
-The pins you'll absolutely have to avoid are: GND, VCC, AREF, and RST - all the others are usable and accessible in the firmware.
-
-Place the Teensy where you plan to put it - you'll have to cut wires to length in the next step, and you'll want to make sure they reach.
-
-Starting with the first column on the right side, measure out how much wire you'll need to connect it to the first pin on the Teensy - it helps to pick a side that you'll be able to work down, to keep the wires from overlapping too much. It may help to leave a little bit of slack so things aren't too tight. Cut the piece of wire, and solder it to the Teensy, and then the column - you can solder it anywhere along the column, but it may be easiest at the keyswitch. Just be sure the wire doesn't separate from the keyswitch when soldering.
-
-As you move from column to column, it'll be helpful to write the locations of the pins down. We'll use this data to setup the matrix in the future.
-
-When you're done with the columns, start with the rows in the same process, from top to bottom, and write them all down. Again, you can solder anywhere along the row, as long as it's after the diode - soldering before the diode (on the keyswitch side) will cause that row not to work.
-
-As you move along, be sure that the Teensy is staying in place - recutting and soldering the wires is a pain!
-
-### Getting some basic firmware set-up
-
-From here, you should have a working keyboard with the correct firmware. Before we attach the Teensy permanently to the keyboard, let's quickly get some firmware loaded onto the Teensy so we can test each keyswitch.
-
-To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/).
-
-The first thing we're going to do is create a new project using the script in the root directory of the firmware. In your terminal, run this command with `<project_name>` replaced by the name of your project - it'll need to be different from any other project in the `keyboards/` folder:
-
-    util/new_project.sh <project_name>
-
-You'll want to navigate to the `keyboards/<project_name>/` folder by typing, like the print-out from the script specifies:
-
-    cd keyboards/<project_name>
-
-#### config.h
-
-The first thing you're going to want to modify is the `config.h` file. Find `MATRIX_ROWS` and `MATRIX_COLS` and change their definitions to match the dimensions of your keyboard's matrix.
-
-Farther down are `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`. Change their definitions to match how you wired up your matrix (looking from the top of the keyboard, the rows run top-to-bottom and the columns run left-to-right). Likewise, change the definition of `UNUSED_PINS` to match the pins you did not use (this will save power).
-
-#### \<project_name\>.h
-
-The next file you'll want to look at is `<project_name>.h`. You're going to want to rewrite the `KEYMAP` definition - the format and syntax here is extremely important, so pay attention to how things are setup. The first half of the definition are considered the arguments - this is the format that you'll be following in your keymap later on, so you'll want to have as many k*xy* variables here as you do keys. The second half is the part that the firmware actually looks at, and will contain gaps depending on how you wired your matrix.
-
-We'll dive into how this will work with the following example. Say we have a keyboard like this:
-
-    ┌───┬───┬───┐
-    │   │   │   │
-    ├───┴─┬─┴───┤
-    │     │     │
-    └─────┴─────┘
-
-This can be described by saying the top row is 3 1u keys, and the bottom row is 2 1.5u keys. The difference between the two rows is important, because the bottom row has an unused column spot (3 v 2). Let's say that this is how we wired the columns:
-
-    ┌───┬───┬───┐
-    │ ┋ │ ┋ │ ┋ │
-    ├─┋─┴─┬─┴─┋─┤
-    │ ┋   │   ┋ │
-    └─────┴─────┘
-
-The middle column is unused on the bottom row in this example. Our `KEYMAP` definition would look like this:
-
-    #define KEYMAP( \
-        k00, k01, k02, \
-          k10,  k11,   \
-    ) \
-    { \
-        { k00, k01,   k02 }, \
-        { k10, KC_NO, k11 }, \
-    }
-
-Notice how the top half is spaced to resemble our physical layout - this helps us understand which keys are associated with which columns. The bottom half uses the keycode `KC_NO` where there is no keyswitch wired in. It's easiest to keep the bottom half aligned in a grid to help us make sense of how the firmware actually sees the wiring.
-
-Let's say that instead, we wired our keyboard like this (a fair thing to do):
-
-    ┌───┬───┬───┐
-    │ ┋ │  ┋│ ┋ │
-    ├─┋─┴─┬┋┴───┤
-    │ ┋   │┋    │
-    └─────┴─────┘
-
-This would require our `KEYMAP` definition to look like this:
-
-    #define KEYMAP( \
-        k00, k01, k02, \
-          k10,  k11,   \
-    ) \
-    { \
-        { k00, k01, k02   }, \
-        { k10, k11, KC_NO }, \
-    }
-
-Notice how the `k11` and `KC_NO` switched places to represent the wiring, and the unused final column on the bottom row. Sometimes it'll make more sense to put a keyswitch on a particular column, but in the end, it won't matter, as long as all of them are accounted for. You can use this process to write out the `KEYMAP` for your entire keyboard - be sure to remember that your keyboard is actually backwards when looking at the underside of it.
-
-#### keymaps/default.c
-
-This is the actual keymap for your keyboard, and the main place you'll make changes as you perfect your layout. `default.c` is the file that gets pull by default when typing `make`, but you can make other files as well, and specify them by typing `make KEYMAP=<variant>`, which will pull `keymaps/<variant>.c`.
-
-The basis of a keymap is its layers - by default, layer 0 is active. You can activate other layers, the highest of which will be referenced first. Let's start with our base layer.
-
-Using our previous example, let's say we want to create the following layout:
-
-    ┌───┬───┬───┐
-    │ A │ 1 │ H │
-    ├───┴─┬─┴───┤
-    │ TAB │ SPC │
-    └─────┴─────┘
-
-This can be accomplished by using the following `keymaps` definition:
-
-    const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = KEYMAP( /* Base */
-      KC_A,  KC_1,  KC_H, \
-        KC_TAB,  KC_SPC   \
-    ),
-    };
-
-Note that the layout of the keycodes is similar to the physical layout of our keyboard - this make it much easier to see what's going on. A lot of the keycodes should be fairly obvious, but for a full list of them, check out [tmk_code/doc/keycode.txt](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keycode.txt) - there are also a lot of aliases to condense your keymap file.
-
-It's also important to use the `KEYMAP` function we defined earlier - this is what allows the firmware to associate our intended readable keymap with the actual wiring.
-
-#### Compiling your firmware
-
-After you've written out your entire keymap, you're ready to get the firmware compiled and onto your Teensy. Before compiling, you'll need to get your [development environment set-up](/doc/BUILD_GUIDE.md) - you can skip the dfu-programmer instructions, but you'll need to download and install the [Teensy Loader](https://www.pjrc.com/teensy/loader.html) to get the firmware on your Teensy.
-
-Once everything is installed, running `make` in the terminal should get you some output, and eventually a `<project_name>.hex` file in that folder. If you're having trouble with this step, see the end of the guide for the trouble-shooting section.
-
-Once you have your `<project_name>.hex` file, open up the Teensy loader application, and click the file icon. From here, navigate to your `QMK/keyboards/<project_name>/` folder, and select the `<project_name>.hex` file. Plug in your keyboard and press the button on the Teensy - you should see the LED on the device turn off once you do. The Teensy Loader app will change a little, and the buttons should be clickable - click the download button (down arrow), and then the reset button (right arrow), and your keyboard should be ready to go!
-
-#### Testing your firmware
-
-Carefully flip your keyboard over, open up a new text document, and try typing - you should get the characters that you put into your keymap. Test each key, and note the ones that aren't working. Here's a quick trouble-shooting guide for non-working keys:
-
-0. Flip the keyboard back over and short the keyswitch's contacts with a piece wire - this will eliminate the possibility of the keyswitch being bad and needing to be replaced.
-1. Check the solder points on the keyswitch - these need to be plump and whole. If you touch it with a moderate amount of force and it comes apart, it's not strong enough.
-2. Check the solder joints on the diode - if the diode is loose, part of your row may register, while the other may not.
-3. Check the solder joints on the columns - if your column wiring is loose, part or all of the column may not work.
-4. Check the solder joints on both sides of the wires going to/from the Teensy - the wires need to be fully soldered and connect to both sides.
-5. Check the <project_name>.h file for errors and incorrectly placed `KC_NO`s - if you're unsure where they should be, instead duplicate a k*xy* variable.
-6. Check to make sure you actually compiled the firmware and flashed the Teensy correctly. Unless you got error messages in the terminal, or a pop-up during flashing, you probably did everything correctly.
-
-If you've done all of these things, keep in mind that sometimes you might have had multiple things affecting the keyswitch, so it doesn't hurt to test the keyswitch by shorting it out at the end.
-
-#### Securing the Teensy, finishing your hardware, getting fancier firmware
-
-Now that you have a working board, it's time to get things in their permanent positions. I've often used liberal amounts of hot glue to secure and insulate things, so if that's your style, start spreading that stuff like butter. Otherwise, double-sided tape is always an elegant solution, and electrical tape is a distant second. Due to the nature of these builds, a lot of this part is up to you and how you planned (or didn't plan) things out.
-
-There are a lot of possibilities inside the firmware - check out the [readme](https://github.com/qmk/qmk_firmware/blob/master/readme.md) for a full feature list, and dive into the different project (Planck, Ergodox EZ, etc) to see how people use all of them. You can always stop by [the OLKB subreddit for help!](http://reddit.com/r/olkb)
-
-## Trouble-shooting compiling
-
-### Windows
-
-#### fork: Resource temporarily unavailable
-
-http://www.avrfreaks.net/forum/windows-81-compilation-error
-
-### Mac
-
-### Linux

docs/HHKB-Alt-controller.md

@@ -1,5 +0,0 @@
-# Alternative Controller for HHKB
-
-* [Geekhack.org thread](https://geekhack.org/index.php?topic=12047.0)
-
-* [Connector unmate](https://geekhack.org/index.php?topic=12047.msg1543860#msg1543860)

docs/Home.md

@@ -1,183 +0,0 @@
-# Quantum Mechanical Keyboard Firmware
-
-You have found the QMK Firmware documentation site. This is a keyboard firmware based on the [tmk\_keyboard firmware](http://github.com/tmk/tmk_keyboard) \([view differences](/Differences-from-TMK.md)\) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). It has also been ported to ARM chips using ChibiOS. You can use it to power your own hand-wired or custom keyboard PCB.
-
-# Getting started
-
-Before you are able to compile, you'll need to install an environment for AVR or ARM development. You'll find the instructions for any OS below. If you find another/better way to set things up from scratch, please consider [making a pull request](https://github.com/qmk/qmk_firmware/pulls) with your changes!
-
-* [Build Environment Setup](/Build-Environment-Setup.md)
-* [QMK Overview](/QMK-Overview.md)
-
-# Configuring QMK Firmware
-
-The QMK Firmware can be configured via the `keymaps` array data. For simply generating a [basic keycode](/Keycodes.md), you add it as an element of your `keymaps` array data. For more complicated actions, there are more advanced keycodes that are organized carefully to represent common operations, some of which can be found on the [Key Functions](/Key-Functions.md) page.
-
-For more details of the `keymaps` array, see [Keymap Overview](/Keymap.md) page.
-
-## Space Cadet Shift: The future, built in
-
-Steve Losh [described](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/) the Space Cadet Shift quite well. Essentially, you hit the left Shift on its own, and you get an opening parenthesis; hit the right Shift on its own, and you get the closing one. When hit with other keys, the Shift key keeps working as it always does. Yes, it's as cool as it sounds. Head on over to the [Space Cadet Shift](/Space-Cadet-Shift.md) page to read about it.
-
-## The Leader key: A new kind of modifier
-
-Most modifiers have to be held or toggled. But what if you had a key that indicated the start of a sequence? You could press that key and then rapidly press 1-3 more keys to trigger a macro, or enter a special layer, or anything else you might want to do. To learn more about it check out the [Leader Key](/Leader-Key.md) page.
-
-## Tap Dance: A single key can do 3, 5, or 100 different things
-
-Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. Read more about it on the [Tap Dance](/Tap-Dance.md) page.
-
-## Temporarily setting the default layer
-
-`DF(layer)` - sets default layer to _layer_. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does.
-
-## Macro shortcuts: Send a whole string when pressing just one key
-
-How would you like a single keypress to send a whole word, sentence, paragraph, or even document? Head on over to the [Macros](/Macros.md) page to read up on all aspects of Simple and Dynamic Macros.
-
-## Additional keycode aliases for software-implemented layouts \(Colemak, Dvorak, etc\)
-
-Everything is assuming you're in Qwerty \(in software\) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap:
-
-```
-#include <keymap_colemak.h>
-```
-
-If you use Dvorak, use `keymap_dvorak.h` instead of `keymap_colemak.h` for this line. After including this line, you will get access to:
-
-* `CM_*` for all of the Colemak-equivalent characters
-* `DV_*` for all of the Dvorak-equivalent characters
-
-These implementations assume you're using Colemak or Dvorak on your OS, not on your keyboard - this is referred to as a software-implemented layout. If your computer is in Qwerty and your keymap is in Colemak or Dvorak, this is referred to as a firmware-implemented layout, and you won't need these features.
-
-To give an example, if you're using software-implemented Colemak, and want to get an `F`, you would use `CM_F`. Using `KC_F` under these same circumstances would result in `T`.
-
-## Backlight Breathing
-
-In order to enable backlight breathing, the following line must be added to your config.h file.
-
-```
-#define BACKLIGHT_BREATHING
-```
-
-The following function calls are used to control the breathing effect.
-
-* `breathing_enable()` - Enable the free-running breathing effect.
-* `breathing_disable()` - Disable the free-running breathing effect immediately.
-* `breathing_self_disable()` - Disable the free-running breathing effect after the current effect ends.
-* `breathing_toggle()` - Toggle the free-running breathing effect.
-* `breathing_defaults()` - Reset the speed and brightness settings of the breathing effect.
-
-The following function calls are used to control the maximum brightness of the breathing effect.
-
-* `breathing_intensity_set(value)` - Set the brightness of the breathing effect when it is at its max value.
-* `breathing_intensity_default()` - Reset the brightness of the breathing effect to the default value based on the current backlight intensity.
-
-The following function calls are used to control the cycling speed of the breathing effect.
-
-* `breathing_speed_set(value)` - Set the speed of the breathing effect - how fast it cycles.
-* `breathing_speed_inc(value)` - Increase the speed of the breathing effect by a fixed value.
-* `breathing_speed_dec(value)` - Decrease the speed of the breathing effect by a fixed value.
-* `breathing_speed_default()` - Reset the speed of the breathing effect to the default value.
-
-The following example shows how to enable the backlight breathing effect when the FUNCTION layer macro button is pressed:
-
-```
-case MACRO_FUNCTION:
-    if (record->event.pressed)
-    {
-        breathing_speed_set(3);
-        breathing_enable();
-        layer_on(LAYER_FUNCTION);
-    }
-    else
-    {
-        breathing_speed_set(1);
-        breathing_self_disable();
-        layer_off(LAYER_FUNCTION);
-    }
-    break;
-```
-
-The following example shows how to pulse the backlight on-off-on when the RAISED layer macro button is pressed:
-
-```
-case MACRO_RAISED:
-  if (record->event.pressed)
-  {
-    layer_on(LAYER_RAISED);
-    breathing_speed_set(2);
-    breathing_pulse();
-    update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST);
-  }
-  else
-  {
-    layer_off(LAYER_RAISED);
-    update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST);
-  }
-  break;
-```
-
-## Other firmware shortcut keycodes
-
-* `RESET` - puts the MCU in DFU mode for flashing new firmware \(with `make dfu`\)
-* `DEBUG` - the firmware into debug mode - you'll need hid\_listen to see things
-* `BL_ON` - turns the backlight on
-* `BL_OFF` - turns the backlight off
-* `BL_<n>` - sets the backlight to level _n_
-* `BL_INC` - increments the backlight level by one
-* `BL_DEC` - decrements the backlight level by one
-* `BL_TOGG` - toggles the backlight
-* `BL_STEP` - steps through the backlight levels
-
-Enable the backlight from the Makefile.
-
-# Custom Quantum functions
-
-All of these functions are available in the `*_kb()` or `*_user()` variety. `kb` ones should only be used in the `<keyboard>/<keyboard>.c` file, and `user` ones should only be used in the `keymap.c`. The keyboard ones call the user ones - it's necessary to keep these calls to allow the keymap functions to work correctly.
-
-## `void matrix_init_*(void)`
-
-This function gets called when the matrix is initiated, and can contain start-up code for your keyboard/keymap.
-
-## `void matrix_scan_*(void)`
-
-This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot.
-
-## `bool process_record_*(uint16_t keycode, keyrecord_t *record)`
-
-This function gets called on every keypress/release, and is where you can define custom functionality. The return value is whether or not QMK should continue processing the keycode - returning `false` stops the execution.
-
-The `keycode` variable is whatever is defined in your keymap, eg `MO(1)`, `KC_L`, etc. and can be switch-cased to execute code whenever a particular code is pressed.
-
-The `record` variable contains infomation about the actual press:
-
-```
-keyrecord_t record {
-  keyevent_t event {
-    keypos_t key {
-      uint8_t col
-      uint8_t row
-    }
-    bool     pressed
-    uint16_t time
-  }
-}
-```
-
-The conditional `if (record->event.pressed)` can tell if the key is being pressed or released, and you can execute code based on that.
-
-## `void led_set_*(uint8_t usb_led)`
-
-This gets called whenever there is a state change on your host LEDs \(eg caps lock, scroll lock, etc\). The LEDs are defined as:
-
-```
-#define USB_LED_NUM_LOCK                0
-#define USB_LED_CAPS_LOCK               1
-#define USB_LED_SCROLL_LOCK             2
-#define USB_LED_COMPOSE                 3
-#define USB_LED_KANA                    4
-```
-
-and can be tested against the `usb_led` with a conditional like `if (usb_led & (1<<USB_LED_CAPS_LOCK))` - if this is true, you can turn your LED on, otherwise turn it off.
-

docs/Key-Functions.md

@@ -1,94 +0,0 @@
-# Quick Aliases To Common Actions
-
-Your keymap can include shortcuts to common operations (called "function actions" in tmk).
-
-These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk `ACTION_*` functions, please see the [TMK documentation](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap.md#2-action).
-
-Instead of using `FNx` when defining `ACTION_*` functions, you can use `F(x)` - the benefit here is being able to use more than 32 function actions (up to 4096), if you happen to need them.
-
-### Switching and toggling layers
-
-`MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer. When you apply this to a key, that same key must be set as `KC_TRNS` on the destination layer. Otherwise, you won't make it back to the original layer when you release the key (and you'll get a keycode sent). You can only switch to layers *above* your current layer. If you're on layer 0 and you use `MO(1)`, that will switch to layer 1 just fine. But if you include `MO(3)` on layer 5, that won't do anything for you -- because layer 3 is lower than layer 5 on the stack.
-
-`OSL(layer)` - momentary switch to *layer*, as a one-shot operation. So if you have a key that's defined as `OSL(1)`, and you tap that key, then only the very next keystroke would come from layer 1. You would drop back to layer zero immediately after that one keystroke. That's handy if you have a layer full of custom shortcuts -- for example, a dedicated key for closing a window. So you tap your one-shot layer mod, then tap that magic 'close window' key, and keep typing like a boss. Layer 1 would remain active as long as you hold that key down, too (so you can use it like a momentary toggle-layer key with extra powers).
-
-`LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped. Like `MO()`, this only works upwards in the layer stack (`layer` must be higher than the current layer).
-
-`TG(layer)` - toggles a layer on or off. As with `MO()`, you should set this key as `KC_TRNS` in the destination layer so that tapping it again actually toggles back to the original layer. Only works upwards in the layer stack.
-
-`TO(layer)` - Goes to a layer. This code is special, because it lets you go either up or down the stack -- just goes directly to the layer you want. So while other codes only let you go _up_ the stack (from layer 0 to layer 3, for example), `TO(2)` is going to get you to layer 2, no matter where you activate it from -- even if you're currently on layer 5. This gets activated on keydown (as soon as the key is pressed).
-
-`TT(layer)` - Layer Tap-Toggle. If you hold the key down, the layer becomes active, and then deactivates when you let go. And if you tap it, the layer simply becomes active (toggles on). It needs 5 taps by default, but you can set it by defining `TAPPING_TOGGLE`, for example, `#define TAPPING_TOGGLE 1` for just one tap.
-
-
-### Fun with modifier keys
-
-* `LSFT(kc)` - applies left Shift to *kc* (keycode) - `S(kc)` is an alias
-* `RSFT(kc)` - applies right Shift to *kc*
-* `LCTL(kc)` - applies left Control to *kc*
-* `RCTL(kc)` - applies right Control to *kc*
-* `LALT(kc)` - applies left Alt to *kc*
-* `RALT(kc)` - applies right Alt to *kc*
-* `LGUI(kc)` - applies left GUI (command/win) to *kc*
-* `RGUI(kc)` - applies right GUI (command/win) to *kc*
-* `HYPR(kc)` - applies Hyper (all modifiers) to *kc*
-* `MEH(kc)`  - applies Meh (all modifiers except Win/Cmd) to *kc*
-* `LCAG(kc)` - applies CtrlAltGui to *kc*
-
-You can also chain these, like this:
-
-    LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress.
-
-The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols. Their long names are also available and documented in `quantum/quantum_keycodes.h`.
-
-    KC_TILD  ~
-    KC_EXLM  !
-    KC_QUES  ?
-    KC_AT    @
-    KC_HASH  #
-    KC_DLR   $
-    KC_PERC  %
-    KC_CIRC  ^
-    KC_AMPR  &
-    KC_ASTR  *
-    KC_LPRN  (
-    KC_RPRN  )
-    KC_UNDS  _
-    KC_PLUS  +
-    KC_DQUO  "
-    KC_LCBR  {
-    KC_RCBR  }
-    KC_LABK  <
-    KC_RABK  >
-    KC_PIPE  |
-    KC_COLN  :
-
-`OSM(mod)` - this is a "one shot" modifier. So let's say you have your left Shift key defined as `OSM(MOD_LSFT)`. Tap it, let go, and Shift is "on" -- but only for the next character you'll type. So to write "The", you don't need to hold down Shift -- you tap it, tap t, and move on with life. And if you hold down the left Shift key, it just works as a left Shift key, as you would expect (so you could type THE). There's also a magical, secret way to "lock" a modifier by tapping it multiple times. If you want to learn more about that, open an issue. :)
-
-`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down.
-
-These are the values you can use for the `mod` in `MT()` and `OSM()`:
-
-  * MOD_LCTL
-  * MOD_LSFT
-  * MOD_LALT
-  * MOD_LGUI
-  * MOD_RCTL
-  * MOD_RSFT
-  * MOD_RALT
-  * MOD_RGUI
-  * MOD_HYPR
-  * MOD_MEH
-
-These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped. Note however, that you cannot mix right and left side modifiers.
-
-We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact:
-
-  * `CTL_T(kc)` - is LCTL when held and *kc* when tapped
-  * `SFT_T(kc)` - is LSFT when held and *kc* when tapped
-  * `ALT_T(kc)` - is LALT when held and *kc* when tapped
-  * `ALGR_T(kc)` - is AltGr when held and *kc* when tapped
-  * `GUI_T(kc)` - is LGUI when held and *kc* when tapped
-  * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)
-  * `LCAG_T(kc)` - is CtrlAltGui when held and *kc* when tapped
-  * `MEH_T(kc)` - is like Hyper, but not as cool -- does not include the Cmd/Win key, so just sends Alt+Ctrl+Shift.

docs/Keycodes.md

@@ -1,228 +0,0 @@
-# Overview
-
-When defining a [keymap](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap.md) each key needs a valid key definition.
-
-This page documents the symbols that correspond to keycodes that are available to you in QMK.
-
-To customize your board, they can be used by themselves or as **action codes** in combination with one of the [many C macros](https://github.com/qmk/qmk_firmware/wiki#c-macros-for-action-code).
-
-The source of truth for these codes is [tmk_core/common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h) file in the qmk source code.
-
-# The Keycodes
-
-Keycodes in QMK are based on [HID Usage Keyboard/Keypad Page(0x07)](http://www.usb.org/developers/hidpage/Hut1_12v2.pdf) with following exceptions:
-
-* `KC_NO` = 0 for no action
-* `KC_TRNS` = 1 for layer transparency
-* internal special keycodes in the `0xA5-DF` range (tmk heritage).
-
-## Letters and Numbers
-
-|KC_1|KC_2|KC_3|KC_4|KC_5|KC_6|KC_7|KC_8|
-|----|----|----|----|----|----|----|----|
-|KC_9|KC_0|KC_F1|KC_F2|KC_F3|KC_F4|KC_F5|KC_F6|
-|KC_F7|KC_F8|KC_F9|KC_F10|KC_F11|KC_F12|KC_F13|KC_F14|
-|KC_F15|KC_F16|KC_F17|KC_F18|KC_F19|KC_F20|KC_F21|KC_F22|
-|KC_F23|KC_F24|KC_A|KC_B|KC_C|KC_D|KC_E|KC_F|
-|KC_G|KC_H|KC_I|KC_J|KC_K|KC_L|KC_M|KC_N|
-|KC_O|KC_P|KC_Q|KC_R|KC_S|KC_T|KC_U|KC_V|
-|KC_W|KC_X|KC_Y|KC_Z|||||
-
-## Punctuation
-
-|Long Name|Short Name|Description|
-|---------|----------|-----------|
-|KC_ENTER|KC_ENT|`Return (ENTER)`|
-|KC_ESCAPE|KC_ESC|`ESCAPE`|
-|KC_BSPACE|KC_BSPC|`DELETE (Backspace)`|
-|KC_TAB||`Tab`|
-|KC_SPACE|KC_SPC|Spacebar|
-|KC_MINUS|KC_MINS|`-` and `_`|
-|KC_EQUAL|KC_EQL|`=` and `+`|
-|KC_LBRACKET|KC_LBRC|`[` and `{`|
-|KC_RBRACKET|KC_RBRC|`]` and `}`|
-|KC_BSLASH|KC_BSLS|`\` and <code>&#124;</code> |
-|KC_NONUS_HASH|KC_NUHS|Non-US `#` and `~`|
-|KC_NONUS_BSLASH|KC_NUBS|Non-US `\` and <code>&#124;</code> |
-|KC_INT1|KC_RO|JIS `\` and <code>&#124;</code> |
-|KC_INT2|KC_KANA|International216|
-|KC_INT3|KC_JYEN|Yen Symbol (`¥`)|
-|KC_SCOLON|KC_SCLN|`;` and `:`|
-|KC_QUOTE|KC_QUOT|`‘` and `“`|
-|KC_GRAVE|KC_GRV|Grave Accent and Tilde|
-|KC_COMMA|KC_COMM|`,` and `<`|
-|KC_DOT||`.` and `>`|
-|KC_SLASH|KC_SLSH|`/` and `?`|
-|KC_CAPSLOCK|KC_CAPS|Caps Lock|
-
-## Modifiers
-
-|Long Name|Short Name|Description|
-|---------|----------|-----------|
-|KC_LCTRL|KC_LCTL|LeftControl|
-|KC_LSHIFT|KC_LSFT|LeftShift|
-|KC_LALT||LeftAlt|
-|KC_LGUI||Left GUI(Windows/Apple/Meta key)|
-|KC_RCTRL|KC_RCTL|RightControl|
-|KC_RSHIFT|KC_RSFT|RightShift|
-|KC_RALT||RightAlt|
-|KC_RGUI||Right GUI(Windows/Apple/Meta key)|
-|KC_LOCKING_CAPS||Locking Caps Lock12|
-|KC_LOCKING_NUM||Locking Num Lock12|
-|KC_LOCKING_SCROLL||Locking Scroll Lock12|
-|KC_INT4|KC_HENK|JIS Henken|
-|KC_INT5|KC_MHEN|JIS Muhenken|
-
-## Commands
-
-|Long Name|Short Name|Description|
-|---------|----------|-----------|
-|KC_PSCREEN|KC_PSCR|PrintScreen1|
-|KC_SCKLOCK|KC_SLCK|Scroll Lock11|
-|KC_PAUSE|KC_PAUS|Pause1|
-|KC_INSERT|KC_INS|Insert1|
-|KC_HOME||Home1|
-|KC_PGUP||PageUp1|
-|KC_DELETE|KC_DEL|Delete Forward|
-|KC_END||End1|
-|KC_PGDOWN|KC_PGDN|PageDown1|
-|KC_RIGHT|KC_RGHT|RightArrow1|
-|KC_LEFT||LeftArrow1|
-|KC_DOWN||DownArrow1|
-|KC_UP||UpArrow1|
-|KC_APPLICATION|KC_APP|Application10|
-|KC_POWER||Power9|
-|KC_EXECUTE||Execute|
-|KC_HELP||Help|
-|KC_MENU||Menu|
-|KC_SELECT||Select|
-|KC_AGAIN||Again|
-|KC_UNDO||Undo|
-|KC_CUT||Cut|
-|KC_COPY||Copy|
-|KC_PASTE||Paste|
-|KC_FIND||Find|
-|KC_ALT_ERASE||Alternate Erase7|
-|KC_SYSREQ||SysReq/Attention1|
-|KC_CANCEL||Cancel|
-|KC_CLEAR||Clear|
-|KC_PRIOR||Prior|
-|KC_RETURN||Return|
-|KC_SEPARATOR||Separator|
-|KC_OUT||Out|
-|KC_OPER||Oper|
-|KC_CLEAR_AGAIN||Clear/Again|
-|KC_CRSEL||CrSel/Props|
-|KC_EXSEL||ExSel|
-|KC_SYSTEM_POWER|KC_PWR|System Power Down|
-|KC_SYSTEM_SLEEP|KC_SLEP|System Sleep|
-|KC_SYSTEM_WAKE|KC_WAKE|System Wake|
-|KC_MAIL|KC_MAIL||
-|KC_CALCULATOR|KC_CALC||
-|KC_MY_COMPUTER|KC_MYCM||
-|KC_WWW_SEARCH|KC_WSCH||
-|KC_WWW_HOME|KC_WHOM||
-|KC_WWW_BACK|KC_WBAK||
-|KC_WWW_FORWARD|KC_WFWD||
-|KC_WWW_STOP|KC_WSTP||
-|KC_WWW_REFRESH|KC_WREF||
-|KC_WWW_FAVORITES|KC_WFAV||
-
-## Media Keys
-
-Windows and Mac use different key codes for next track and previous track. Make sure you choose the keycode that corresponds to your OS.
-
-|Long Name|Short Name|Description|
-|---------|----------|-----------|
-|KC_STOP||Stop|
-|KC__MUTE||Mute|
-|KC__VOLUP||Volume Up|
-|KC__VOLDOWN||Volume Down|
-|KC_AUDIO_MUTE|KC_MUTE||
-|KC_AUDIO_VOL_UP|KC_VOLU||
-|KC_AUDIO_VOL_DOWN|KC_VOLD||
-|KC_MEDIA_NEXT_TRACK|KC_MNXT|Next Track (Windows)|
-|KC_MEDIA_PREV_TRACK|KC_MPRV|Previous Track (Windows)|
-|KC_MEDIA_FAST_FORWARD|KC_MFFD|Next Track (macOS)|
-|KC_MEDIA_REWIND|KC_MRWD|Previous Track (macOS)|
-|KC_MEDIA_STOP|KC_MSTP||
-|KC_MEDIA_PLAY_PAUSE|KC_MPLY||
-|KC_MEDIA_SELECT|KC_MSEL||
-
-## Numpad
-
-|Long Name|Short Name|Description|
-|---------|----------|-----------|
-|KC_NUMLOCK|KC_NLCK|Keypad Num Lock and Clear11|
-|KC_KP_SLASH|KC_PSLS|Keypad /|
-|KC_KP_ASTERISK|KC_PAST|Keypad *|
-|KC_KP_MINUS|KC_PMNS|Keypad -|
-|KC_KP_PLUS|KC_PPLS|Keypad +|
-|KC_KP_ENTER|KC_PENT|Keypad ENTER5|
-|KC_KP_1|KC_P1|Keypad 1 and End|
-|KC_KP_2|KC_P2|Keypad 2 and Down Arrow|
-|KC_KP_3|KC_P3|Keypad 3 and PageDn|
-|KC_KP_4|KC_P4|Keypad 4 and Left Arrow|
-|KC_KP_5|KC_P5|Keypad 5|
-|KC_KP_6|KC_P6|Keypad 6 and Right Arrow|
-|KC_KP_7|KC_P7|Keypad 7 and Home|
-|KC_KP_8|KC_P8|Keypad 8 and Up Arrow|
-|KC_KP_9|KC_P9|Keypad 9 and PageUp|
-|KC_KP_0|KC_P0|Keypad 0 and Insert|
-|KC_KP_DOT|KC_PDOT|Keypad . and Delete|
-|KC_KP_EQUAL|KC_PEQL|Keypad =|
-|KC_KP_COMMA|KC_PCMM|Keypad Comma27|
-|KC_KP_EQUAL_AS400||Keypad Equal Sign29|
-
-## Special Keys
-
-|Long Name|Short Name|Description|
-|---------|----------|-----------|
-|KC_NO||Ignore this key. (NOOP) |
-
-## Mousekey
-
-|Long Name|Short Name|Description|
-|---------|----------|-----------|
-|KC_MS_UP|KC_MS_U|Mouse Cursor Up|
-|KC_MS_DOWN|KC_MS_D|Mouse Cursor Down|
-|KC_MS_LEFT|KC_MS_L|Mouse Cursor Left|
-|KC_MS_RIGHT|KC_MS_R|Mouse Cursor Right|
-|KC_MS_BTN1|KC_BTN1|Mouse Button 1|
-|KC_MS_BTN2|KC_BTN2|Mouse Button 2|
-|KC_MS_BTN3|KC_BTN3|Mouse Button 3|
-|KC_MS_BTN4|KC_BTN4|Mouse Button 4|
-|KC_MS_BTN5|KC_BTN5|Mouse Button 5|
-|KC_MS_WH_UP|KC_WH_U|Mouse Wheel Up|
-|KC_MS_WH_DOWN|KC_WH_D|Mouse Wheel Down|
-|KC_MS_WH_LEFT|KC_WH_L|Mouse Wheel Left|
-|KC_MS_WH_RIGHT|KC_WH_R|Mouse Wheel Right|
-|KC_MS_ACCEL0|KC_ACL0|Mouse Acceleration 0|
-|KC_MS_ACCEL1|KC_ACL1|Mouse Acceleration 1|
-|KC_MS_ACCEL2|KC_ACL2|Mouse Acceleration 2|
-
-## Magic Keys
-
-The following keys can be used to turn on and off various "Magic" features. These include Boot Magic (holding certain keys down while plugging the keyboard in) and the Magic Key.
-
-|Long Name|Short Name|Description|
-|---------|----------|-----------|
-|MAGIC_SWAP_CONTROL_CAPSLOCK||Swap Capslock and Control|
-|MAGIC_CAPSLOCK_TO_CONTROL||Change Capslock to Control|
-|MAGIC_SWAP_ALT_GUI||Swap ALT and GUI|
-|MAGIC_SWAP_LALT_LGUI||Swap LALT and LGUI|
-|MAGIC_SWAP_RALT_RGUI||Swap RALT and RGUI|
-|MAGIC_NO_GUI||Disable off the GUI key|
-|MAGIC_SWAP_GRAVE_ESC||Swap the GRAVE (~ `) and Esc keys|
-|MAGIC_SWAP_BACKSLASH_BACKSPACE||Swap Backslash and Backspace|
-|MAGIC_UNSWAP_CONTROL_CAPSLOCK||Disable the Control/Caps Swap|
-|MAGIC_UNCAPSLOCK_TO_CONTROL||Turn Capslock back into Capslock|
-|MAGIC_UNSWAP_ALT_GUI||Turn the ALT/GUI swap off|
-|MAGIC_UNSWAP_LALT_LGUI||Turn the LALT/LGUI swap off|
-|MAGIC_UNSWAP_RALT_RGUI||Turn the RALT/RGUI swap off|
-|MAGIC_UNNO_GUI||Enable the GUI key|
-|MAGIC_UNSWAP_GRAVE_ESC||Turn the GRAVE/ESC swap off|
-|MAGIC_UNSWAP_BACKSLASH_BACKSPACE||Turn the Backslash/Backspace swap off|
-|MAGIC_HOST_NKRO||Turn NKRO on|
-|MAGIC_UNHOST_NKRO||Turn NKRO off|
-|MAGIC_TOGGLE_NKRO||Toggle NKRO on or off|

docs/Keymap-examples.md

@@ -1,37 +0,0 @@
-# Share your keymap idea here!
-https://github.com/tmk/tmk_keyboard/issues/265
-
----
-
-## Reverse-shifted for numbers
-With pressing Shift and '1' key you get **1** while with just '1' key you get **!**.
-- https://geekhack.org/index.php?topic=41989.msg1959718#msg1959718
-
-
-## KBT Pure layout
-Keymap code on Alps64
-https://github.com/thisisshi/tmk_keyboard/blob/15fe63e8d181a8a95988dcc71929f0024df55caa/keyboard/alps64/keymap_pure.c
-
-and guide.
-https://github.com/thisisshi/tmk_keyboard/blob/77ac0805ade565fb23657e3644c920ada71edccf/keyboard/alps64/Guide.md
-
-## Prevent stuck modifiers
-
-Consider the following scenario:
-
-1. Layer 0 has a key defined as Shift.
-2. The same key is defined on layer 1 as the letter A.
-3. User presses Shift.
-4. User switches to layer 1 for whatever reason.
-5. User releases Shift, or rather the letter A.
-6. User switches back to layer 0.
-
-Shift was actually never released and is still considered pressed.
-
-If such situation bothers you add this to your `config.h`:
-
-    #define PREVENT_STUCK_MODIFIERS
-
-This option uses 5 bytes of memory per every 8 keys on the keyboard
-rounded up (5 bits per key). For example on Planck (48 keys) it uses
-(48/8)\*5 = 30 bytes.

docs/Keymap.md

@@ -1,222 +0,0 @@
-# Keymap Overview
-
-QMK keymaps are defined inside a C source file. The data structure is an array of arrays. The outer array is a list of layer arrays while the inner layer array is a list of keys. Most keyboards define a `KEYMAP()` macro to help you create this array of arrays.
-
-
-## Keymap and layers
-In QMK,  **`const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS]`** holds multiple **layers** of keymap information in **16 bit** data holding the **action code**. You can define **32 layers** at most.
-
-For trivial key definitions, the higher 8 bits of the **action code** are all 0 and the lower 8 bits holds the USB HID usage code generated by the key as **keycode**.
-
-Respective layers can be validated simultaneously. Layers are indexed with 0 to 31 and higher layer has precedence.
-
-    Keymap: 32 Layers                   Layer: action code matrix
-    -----------------                   ---------------------
-    stack of layers                     array_of_action_code[row][column]
-           ____________ precedence               _______________________
-          /           / | high                  / ESC / F1  / F2  / F3   ....
-      31 /___________// |                      /-----/-----/-----/-----
-      30 /___________// |                     / TAB /  Q  /  W  /  E   ....
-      29 /___________/  |                    /-----/-----/-----/-----
-       :   _:_:_:_:_:__ |               :   /LCtrl/  A  /  S  /  D   ....
-       :  / : : : : : / |               :  /  :     :     :     :
-       2 /___________// |               2 `--------------------------
-       1 /___________// |               1 `--------------------------
-       0 /___________/  V low           0 `--------------------------
-
-
-Sometimes, the action code stored in keymap may be referred as keycode in some documents due to the TMK history.
-
-### Keymap layer status
-Keymap layer has its state in two 32 bit parameters:
-
-* **`default_layer_state`** indicates a base keymap layer(0-31) which is always valid and to be referred.
-* **`layer_state`** () has current on/off status of the layer on its each bit.
-
-Keymap has its state in two parameter **`default_layer`** indicates a base keymap layer(0-31) which is always valid and to be referred, **`keymap_stat`** is 16bit variable which has current on/off status of layers on its each bit.
-Keymap layer '0' is usually `default_layer` and which is the only valid layer and other layers is initially off after boot up firmware, though, you can configured them in `config.h`.
-To change `default_layer` will be useful when you switch key layout completely, say you want Colmak instead of Qwerty.
-
-    Initial state of Keymap          Change base layout              
-    -----------------------          ------------------              
-
-      31                               31
-      30                               30
-      29                               29
-       :                                :
-       :                                :   ____________
-       2   ____________                 2  /           /
-       1  /           /              ,->1 /___________/
-    ,->0 /___________/               |  0
-    |                                |
-    `--- default_layer = 0           `--- default_layer = 1
-         layer_state   = 0x00000001       layer_state   = 0x00000002
-
-On the other hand, you shall change `layer_state` to overlay base layer with some layers for feature such as navigation keys, function key(F1-F12), media keys or special actions.
-
-    Overlay feature layer
-    ---------------------      bit|status
-           ____________        ---+------
-      31  /           /        31 |   0
-      30 /___________// -----> 30 |   1
-      29 /___________/  -----> 29 |   1
-       :                        : |   :
-       :   ____________         : |   :
-       2  /           /         2 |   0
-    ,->1 /___________/  ----->  1 |   1
-    |  0                        0 |   0
-    |                                 +
-    `--- default_layer = 1            |
-         layer_state   = 0x60000002 <-'
-
-
-
-### Layer Precedence and Transparency
-Note that ***higher layer has higher priority on stack of layers***, namely firmware falls down from top layer to bottom to look up keycode. Once it spots keycode other than **`KC_TRNS`**(transparent) on a layer it stops searching and lower layers aren't referred.
-
-You can place `KC_TRANS` on overlay layer changes just part of layout to fall back on lower or base layer.
-Key with `KC_TRANS` (`KC_TRNS` and `_______` are the alias) doesn't has its own keycode and refers to lower valid layers for keycode, instead.
-
-## Anatomy Of A `keymap.c`
-
-For this example we will walk through the [default Clueboard keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/keymaps/default/keymap.c). You'll find it helpful to open that file in another browser window so you can look at everything in context.
-
-There are 3 main sections of a `keymap.c` file you'll want to concern yourself with:
-
-* [The Definitions](#definitions)
-* [The Layer/Keymap Datastructure](#layers-and-keymaps)
-* [Custom Functions](#custom-functions), if any
-
-### Definitions
-
-At the top of the file you'll find this:
-
-    #include "clueboard.h"
-
-    // Helpful defines
-    #define GRAVE_MODS  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
-    #define _______ KC_TRNS
-
-    // Each layer gets a name for readability.
-    // The underscores don't mean anything - you can
-    // have a layer called STUFF or any other name.
-    // Layer names don't all need to be of the same 
-    // length, and you can also skip them entirely
-    // and just use numbers.
-    #define _BL 0
-    #define _FL 1
-    #define _CL 2
-
-These are some handy definitions we can use when building our keymap and our custom function. The `GRAVE_MODS` definition will be used later in our custom function. The `_______` define makes it easier to see what keys a layer is overriding, while the `_BL`, `_FL`, and `_CL` defines make it easier to refer to each of our layers.
-
-### Layers and Keymaps
-
-The main part of this file is the `keymaps[]` definition. This is where you list your layers and the contents of those layers. This part of the file begins with this definition:
-
-    const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-After this you'll find a list of KEYMAP() macros. A KEYMAP() is simply a list of keys to define a single layer. Typically you'll have one or more "base layers" (such as QWERTY, Dvorak, or Colemak) and then you'll layer on top of that one or more "function" layers. Due to the way layers are processed you can't overlay a "lower" layer on top of a "higher" layer. 
-
-`keymaps[][MATRIX_ROWS][MATRIX_COLS]` in QMK holds the 16 bit action code (sometimes referred as the quantum keycode) in it.  For the keycode representing typical keys, its high byte is 0 and its low byte is the USB HID usage ID for keyboard. 
-
-> TMK from which QMK was forked uses `const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS]` instead and holds the 8 bit keycode.  Some keycode values are reserved to induce execution of certain action codes via the `fn_actions[]` array.
-
-#### Base Layer
-
-Here is an example of the Clueboard's base layer:
-
-      /* Keymap _BL: Base Layer (Default Layer)
-       */
-    [_BL] = KEYMAP(
-      F(0),    KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_GRV,  KC_BSPC,          KC_PGUP, \
-      KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,                   KC_PGDN, \
-      KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN,  KC_QUOT,  KC_NUHS,  KC_ENT,                             \
-      KC_LSFT, KC_NUBS, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,   KC_SLSH,  KC_RO,    KC_RSFT,          KC_UP,            \
-      KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN,          KC_SPC,KC_SPC,                        KC_HENK,  KC_RALT,  KC_RCTL,  MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
-
-Some interesting things to note about this:
-
-* From a C source point of view it's only a single array, but we have embedded whitespace to more easily visualize where each key is on the physical device.
-* Plain keyboard scancodes are prefixed with KC_, while "special" keys are not.
-* The upper left key activates custom function 0 (`F(0)`)
-* The "Fn" key is defined with `MO(_FL)`, which moves to the `_FL` layer while that key is being held down.
-
-#### Function Overlay Layer
-
-Our function layer is, from a code point of view, no different from the base layer. Conceptually, however, you will build that layer as an overlay, not a replacement. For many people this distinction does not matter, but as you build more complicated layering setups it matters more and more.
-
-    [_FL] = KEYMAP(
-      KC_GRV,  KC_F1,   KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,   KC_F11,   KC_F12,   _______, KC_DEL,           BL_STEP, \
-      _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS,  _______,  _______,  _______,                   _______, \
-      _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,                           \
-      _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,          KC_PGUP,         \
-      _______, _______, _______, _______,        _______,_______,                        _______,  _______,  _______,  MO(_FL), KC_HOME, KC_PGDN, KC_END),
-
-Some interesting things to note:
-
-* We have used our `_______` definition to turn `KC_TRNS` into `_______`. This makes it easier to spot the keys that have changed on this layer.
-* While in this layer if you press one of the `_______` keys it will activate the key in the next lowest active layer. 
-
-### Custom Functions
-
-At the bottom of the file we've defined a single custom function. This function defines a key that sends `KC_ESC` when pressed without modifiers and `KC_GRAVE` when modifiers are held. There are a couple pieces that need to be in place for this to work, and we will go over both of them. 
-
-#### `fn_actions[]`
-
-We define the `fn_actions[]` array to point to custom functions. `F(N)` in a keymap will call element N of that array. For the Clueboard's that looks like this:
-
-    const uint16_t PROGMEM fn_actions[] = {
-      [0] = ACTION_FUNCTION(0),  // Calls action_function()
-    };
-
-In this case we've instructed QMK to call the `ACTION_FUNCTION` callback, which we will define in the next section.
-
-> This `fn_actions[]` interface is mostly for backward compatibility.  In QMK, you don't need to use `fn_actions[]`.  You can directly use `ACTION_FUNCTION(N)` or any other action code value itself normally generated by the macro in `keymaps[][MATRIX_ROWS][MATRIX_COLS]`.  N in `F(N)` can only be 0 to 31.  Use of the action code directly in `keymaps` unlocks this limitation.
-
-#### `action_function()`
-
-To actually handle the keypress event we define an `action_function()`. This function will be called when the key is pressed, and then again when the key is released. We have to handle both situations within our code, as well as determining whether to send/release `KC_ESC` or `KC_GRAVE`.
-
-    void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-      static uint8_t mods_pressed;
-
-      switch (id) {
-        case 0:
-          /* Handle the combined Grave/Esc key
-           */
-          mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
-
-          if (record->event.pressed) {
-            /* The key is being pressed.
-             */
-            if (mods_pressed) {
-              add_key(KC_GRV);
-              send_keyboard_report();
-            } else {
-              add_key(KC_ESC);
-              send_keyboard_report();
-            }
-          } else {
-            /* The key is being released.
-             */
-            if (mods_pressed) {
-              del_key(KC_GRV);
-              send_keyboard_report();
-            } else {
-              del_key(KC_ESC);
-              send_keyboard_report();
-            }
-          }
-          break;
-      }
-    }
-
-# Nitty Gritty Details
-
-This should have given you a basic overview for creating your own keymap. For more details see the following resources:
-
-* https://github.com/qmk/qmk_firmware/wiki/Keycodes
-* https://github.com/qmk/qmk_firmware/wiki/FAQ-Keymap
-* https://github.com/qmk/qmk_firmware/wiki/Keymap-examples
-
-We are actively working to improve these docs. If you have suggestions for how they could be made better please [file an issue](https://github.com/qmk/qmk_firmware/issues/new)!

docs/Kiibohd.asciidoc

@@ -1,29 +0,0 @@
-== KLL vs TMK
-1. **Shift** = Memontary
-1. Latch = One shot
-1. Lock  = Toggle
-
-## KLL terminology
-### Fall-through
-When a key is undefined on a particular layer, the key
-definition on the previously stacked layer will be used. Eventually
-the key definition will be set to using the default layer. If the None
-keyword is used, then the fall-through will stop and no action will
-take place.
-###Latch
-When referring to keyboards, a key function that is only enabled
-until the release of the next keypress.
-###Lock
-When referring to keyboards, a key function that is enabled until
-that key is pressed again (e.g. Caps Lock).
-### NKRO
-N-Key Rollover is the capability to press N number of keys at the
-same time on a keyboard and have them all register on the OS simultaneously.
-### Scan Code
-Row x Column code or native protocol code used by the keyboard.
-### Shift
-When referring to keyboards, a key function that is enabled while
-that key is held.
-### USB Code
-Keyboard Press/Release codes as defined by the USB HID
-Spec.

docs/License-Clarification.md

@@ -1,38 +0,0 @@
-# Overview
-
-As raised in #1038 and other issues, the licensing status of QMK is not clear. In an effort to remove ambiguity and to clarify the licensing status of the quantum code we are identifying the providence of our source code files and clarifying what license applies to each one.
-
-# Signoff
-
-This section documents the people who need to sign off on applying the GPL to one or more of their contributions. If your name appears below and you consent to applying the GPL to your contributions, please put today's date in the last field of your row. Please stick to the following date format: 2017 Jan 28
-
-Username | Files | Sign Off Date |
----------|-------|---------------|
-@0xdec | quantum/rgblight.c | 2017 Jan 29 |
-@algernon | quantum/quantum.c<br>quantum/quantum.h<br>quantum/process_keycode/process_tap_dance.c<br>quantum/process_keycode/process_tap_dance.h<br>quantum/process_keycode/process_unicode.c<br>quantum/process_keycode/process_unicode.h | 2017 Jan 29 |
-@cdlm | quantum/template/template.c<br>quantum/template/template.h | 2017 Feb 03 |
-@DidierLoiseau | quantum/keymap_extras/keymap_canadian_multilingual.h<br>quantum/keymap_extras/keymap_bepo.h |2017 Jan 29 |
-@eltang |  quantum/config_common.h<br>quantum/matrix.c<br>quantum/quantum.c<br>quantum/quantum.h<br>quantum/rgblight.c<br>quantum/rgblight.h<br>quantum/template/config.h | 2017 Feb 28 |
-@ezuk | quantum/matrix.c<br>quantum/quantum.c<br>quantum/quantum.h<br>quantum/quantum_keycodes.h<br>quantum/rgblight.c<br>quantum/rgblight.h<br>quantum/keymap_extras/keymap_colemak.h<br>quantum/keymap_extras/keymap_nordic.h | 2017 Jan 31 |
-@fredizzimo | quantum/config_common.h<br>quantum/keycode_config.h<br>quantum/keymap.h<br>quantum/keymap_common.c<br>quantum/keymap_common.c<br>quantum/matrix.c<br>quantum/quantum.h<br>quantum/rgblight.c<br>quantum/rgblight.h<br>quantum/api/api_sysex.c | 2017 Jan 29 |
-@h-youhei | quantum/keymap_extras/keymap_jp.h | 2017 Jan 28 |
-@heartsekai | quantum/keymap_extras/keymap_german_ch.h | 2017 Jan 29 |
-@IBnobody | quantum/keycode_config.h<br>quantum/matrix.c<br>quantum/quantum.c<br>quantum/audio/audio.c<br>quantum/audio/audio.h<br>quantum/audio/audio_pwm.c<br>quantum/audio/audio_pwm.c<br>quantum/audio/voices.c<br>quantum/audio/voices.h<br>quantum/template/config.h<br>quantum/template/template.c | 2017 Jan 30 |
-@jackhumbert | quantum/config_common.h<br>quantum/keycode_config.h<br>quantum/keymap.h<br>quantum/keymap_common.c<br>quantum/light_ws2812.c<br>quantum/light_ws2812.h<br>quantum/matrix.c<br>quantum/quantum.c<br>quantum/quantum.h<br>quantum/quantum_keycodes.h<br>quantum/rgblight.c<br>quantum/rgblight.h<br>quantum/api/api_sysex.c<br>quantum/audio/audio.c<br>quantum/audio/audio.h<br>quantum/audio/audio_pwm.c<br>quantum/audio/audio_pwm.c<br>quantum/audio/voices.c<br>quantum/audio/voices.h<br>quantum/keymap_extras/keymap_colemak.h<br>quantum/keymap_extras/keymap_dvorak.h<br>quantum/keymap_extras/keymap_fr_ch.h<br>quantum/keymap_extras/keymap_french.h<br>quantum/keymap_extras/keymap_french_osx.h<br>quantum/keymap_extras/keymap_german.h<br>quantum/keymap_extras/keymap_german_ch.h<br>quantum/keymap_extras/keymap_german_osx.h<br>quantum/keymap_extras/keymap_neo2.h<br>quantum/keymap_extras/keymap_nordic.h<br>quantum/keymap_extras/keymap_plover.h<br>quantum/keymap_extras/keymap_spanish.h<br>quantum/keymap_extras/keymap_uk.h<br>quantum/process_keycode/process_midi.c<br>quantum/process_keycode/process_music.c<br>quantum/process_keycode/process_tap_dance.c<br>quantum/process_keycode/process_tap_dance.h<br>quantum/process_keycode/process_unicode.c<br>quantum/process_keycode/process_unicode.h<br>quantum/template/config.h<br>quantum/template/template.c<br>quantum/template/template.h | 2017-01-29 |
-@jakllsch | quantum/keymap_extras/keymap_dvorak.h<br>quantum/keymap_extras/keymap_fr_ch.h<br>quantum/keymap_extras/keymap_french.h<br>quantum/keymap_extras/keymap_german.h<br>quantum/keymap_extras/keymap_german_ch.h<br>quantum/keymap_extras/keymap_nordic.h<br>quantum/keymap_extras/keymap_spanish.h<br>quantum/keymap_extras/keymap_uk.h | 2017 Jan 29 |
-kuel | quantum/keymap_extras/keymap_unicode_cyrillic.h<br>quantum/keymap_extras/keymap_russian.h | |
-@lindhe | quantum/keymap_extras/keymap_nordic.h<br>quantum/keymap_extras/keymap_norwegian.h | 2017 Jan 30 |
-@matzebond | quantum/keymap_extras/keymap_german.h<br>quantum/keymap_extras/keymap_neo2.h | 2017 Jan 30 |
-@plgruener | quantum/keymap_extras/keymap_german.h<br>quantum/keymap_extras/keymap_neo2.h | 2017 Jan 30 |
-@priyadi | quantum/quantum.c<br>quantum/process_keycode/process_unicode.c<br>quantum/process_keycode/process_unicode.h | 2017 Jan 31 |
-@pvinis | quantum/quantum.c<br>quantum/quantum.h<br>quantum/process_keycode/process_tap_dance.c<br>quantum/process_keycode/process_tap_dance.h | 2017 Jan 29 |
-@Smilliam | quantum/quantum.c | 2017 Feb 25 |
-@sperochon | quantum/keymap_extras/keymap_french_osx.h | 2017 Jan 30 |
-stephan . bosebeck at holidayinsider.com | quantum/keymap_extras/keymap_german_osx.h | 2017 Feb 15 |
-@TerryMathews | quantum/quantum.c | 2017 Jan 29 |
-@Twey | quantum/keymap_extras/keymap_plover.h | |
-@Vifon | quantum/dynamic_macro.h<br>quantum/quantum.c | 2017 Feb 09 |
-@vincent-pochet | quantum/keymap_extras/keymap_fr_ch.h | 2017 Feb 09 |
-@wez | quantum/dynamic_macro.h | 2017 Jan 29 |
-@Wilba6582 | quantum/keymap.h<br>quantum/keymap_common.c<br>quantum/quantum_keycodes.h | 2017 Feb 15 |
-@yangliu | quantum/light_ws2812.c<br>quantum/light_ws2812.h<br>quantum/rgblight.c<br>quantum/rgblight.h | 2017 Jan 30 |

docs/Macros.md

@@ -1,215 +0,0 @@
-# Macro shortcuts: Send a whole string when pressing just one key
-
-Instead of using the `ACTION_MACRO` function, you can simply use `M(n)` to access macro *n* - *n* will get passed into the `action_get_macro` as the `id`, and you can use a switch statement to trigger it. This gets called on the keydown and keyup, so you'll need to use an if statement testing `record->event.pressed` (see keymap_default.c).
-
-```c
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is.
-{
-  switch(id) {
-    case 0: // this would trigger when you hit a key mapped as M(0)
-      if (record->event.pressed) {
-        return MACRO( I(255), T(H), T(E), T(L), T(L), W(255), T(O), END  ); // this sends the string 'hello' when the macro executes
-      }
-      break;
-  }
-  return MACRO_NONE;
-};
-```
-A macro can include the following commands:
-
-* I() change interval of stroke in milliseconds.
-* D() press key.
-* U() release key.
-* T() type key(press and release).
-* W() wait (milliseconds).
-* END end mark.
-
-So above you can see the stroke interval changed to 255ms between each keystroke, then a bunch of keys being typed, waits a while, then the macro ends.
-
-Note: Using macros to have your keyboard send passwords for you is possible, but a bad idea.
-
-## Advanced macro functions
-
-To get more control over the keys/actions your keyboard takes, the following functions are available to you in the `action_get_macro` function block:
-
-* `record->event.pressed`
-
-This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is
-
-```c
-if (record->event.pressed) {
-  // on keydown
-} else {
-  // on keyup
-}
-```
-
-* `register_code(<kc>);`
-
-This sends the `<kc>` keydown event to the computer. Some examples would be `KC_ESC`, `KC_C`, `KC_4`, and even modifiers such as `KC_LSFT` and `KC_LGUI`.
-
-* `unregister_code(<kc>);`
-
-Parallel to `register_code` function, this sends the `<kc>` keyup event to the computer. If you don't use this, the key will be held down until it's sent.
-
-* `layer_on(<n>);`
-
-This will turn on the layer `<n>` - the higher layer number will always take priority. Make sure you have `KC_TRNS` for the key you're pressing on the layer you're switching to, or you'll get stick there unless you have another plan.
-
-* `layer_off(<n>);`
-
-This will turn off the layer `<n>`.
-
-* `clear_keyboard();`
-
-This will clear all mods and keys currently pressed.
-
-* `clear_mods();`
-
-This will clear all mods currently pressed.
-
-* `clear_keyboard_but_mods();`
-
-This will clear all keys besides the mods currently pressed.
-
-* `update_tri_layer(layer_1, layer_2, layer_3);`
-
-If the user attempts to activate layer 1 AND layer 2 at the same time (for example, by hitting their respective layer keys), layer 3 will be activated. Layers 1 and 2 will _also_ be activated, for the purposes of fallbacks (so a given key will fall back from 3 to 2, to 1 -- and only then to 0).
-
-### Naming your macros
-
-If you have a bunch of macros you want to refer to from your keymap, while keeping the keymap easily readable, you can just name them like so:
-
-```
-#define AUD_OFF M(6)
-#define AUD_ON M(7)
-#define MUS_OFF M(8)
-#define MUS_ON M(9)
-#define VC_IN M(10)
-#define VC_DE M(11)
-#define PLOVER M(12)
-#define EXT_PLV M(13)
-```
-
-As was done on the [Planck default keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/default/keymap.c#L33-L40)
-
-#### Timer functionality
-
-It's possible to start timers and read values for time-specific events - here's an example:
-
-```c
-static uint16_t key_timer;
-key_timer = timer_read();
-if (timer_elapsed(key_timer) < 100) {
-  // do something if less than 100ms have passed
-} else {
-  // do something if 100ms or more have passed
-}
-```
-
-It's best to declare the `static uint16_t key_timer;` outside of the macro block (top of file, etc).
-
-### Example: Single-key copy/paste (hold to copy, tap to paste)
-
-With QMK, it's easy to make one key do two things, as long as one of those things is being a modifier. :) So if you want a key to act as Ctrl when held and send the letter R when tapped, that's easy: `CTL_T(KC_R)`. But what do you do when you want that key to send Ctrl-V (paste) when tapped, and Ctrl-C (copy) when held?
-
-Here's what you do:
-
-
-```
-static uint16_t key_timer;
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-      switch(id) {
-        case 0: {
-            if (record->event.pressed) {
-                key_timer = timer_read(); // if the key is being pressed, we start the timer.
-            }
-            else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down").
-                if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap.
-                    return MACRO( D(LCTL), T(C), U(LCTL), END  );
-                }
-                else {
-                    return MACRO( D(LCTL), T(V), U(LCTL), END  );
-                }
-            }
-            break;
-        }
-      }
-    return MACRO_NONE;
-};
-```
-
-And then, to assign this macro to a key on your keyboard layout, you just use `M(0)` on the key you want to press for copy/paste.
-
-# Dynamic macros: record and replay macros in runtime
-
-In addition to the static macros described above, you may enable the dynamic macros which you may record while writing. They are forgotten as soon as the keyboard is unplugged. Only two such macros may be stored at the same time, with the total length of 64 keypresses (by default).
-
-To enable them, first add a new element to the `planck_keycodes` enum — `DYNAMIC_MACRO_RANGE`:
-
-    enum planck_keycodes {
-      QWERTY = SAFE_RANGE,
-      COLEMAK,
-      DVORAK,
-      PLOVER,
-      LOWER,
-      RAISE,
-      BACKLIT,
-      EXT_PLV,
-      DYNAMIC_MACRO_RANGE,
-    };
-
-It must be the last element because `dynamic_macros.h` will add some more keycodes after it.
-
-Below it include the `dynamic_macro.h` header:
-
-    #include "dynamic_macro.h"`
-
-Add the following keys to your keymap:
-
-- `DYN_REC_START1` — start recording the macro 1,
-- `DYN_REC_START2` — start recording the macro 2,
-- `DYN_MACRO_PLAY1` — replay the macro 1,
-- `DYN_MACRO_PLAY2` — replay the macro 2,
-- `DYN_REC_STOP` — finish the macro that is currently being recorded.
-
-Add the following code to the very beginning of your `process_record_user()` function:
-
-    if (!process_record_dynamic_macro(keycode, record)) {
-        return false;
-    }
-
-That should be everything necessary. To start recording the macro, press either `DYN_REC_START1` or `DYN_REC_START2`. To finish the recording, press the `DYN_REC_STOP` layer button. To replay the macro, press either `DYN_MACRO_PLAY1` or `DYN_MACRO_PLAY2`.
-
-Note that it's possible to replay a macro as part of a macro. It's ok to replay macro 2 while recording macro 1 and vice versa but never create recursive macros i.e. macro 1 that replays macro 1. If you do so and the keyboard will get unresponsive, unplug the keyboard and plug it again.
-
-For users of the earlier versions of dynamic macros: It is still possible to finish the macro recording using just the layer modifier used to access the dynamic macro keys, without a dedicated `DYN_REC_STOP` key. If you want this behavior back, use the following snippet instead of the one above:
-
-    uint16_t macro_kc = (keycode == MO(_DYN) ? DYN_REC_STOP : keycode);
-    if (!process_record_dynamic_macro(macro_kc, record)) {
-        return false;
-    }
-
-If the LED-s start blinking during the recording with each keypress, it means there is no more space for the macro in the macro buffer. To fit the macro in, either make the other macro shorter (they share the same buffer) or increase the buffer size by setting the `DYNAMIC_MACRO_SIZE` preprocessor macro (default value: 128; please read the comments for it in the header).
-
-For the details about the internals of the dynamic macros, please read the comments in the `dynamic_macro.h` header.
-
-# Sending strings
-Some people want to have a password or some text on a key. This is possible without having to do every key individually using `SEND_STRING("<text>");`. Note the caps, because `send_string("<text>");` does something else. For example:
-```c
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is.
-{
-  switch(id) {
-    case 0: // this would trigger when you hit a key mapped as M(0)
-      if (record->event.pressed) {
-				SEND_STRING("QMK is the best thing ever!"); // This would type "QMK is the best thing ever!" (without quotation marks).
-        return false; // This is false because it has to return something.
-      }
-      break;
-  }
-  return MACRO_NONE;
-};
-```
-If you'd want it to press enter as well, just replace `return false;` with `return MACRO( T(ENT), END );`.

docs/Make-Instructions.md

@@ -1,167 +0,0 @@
-# More detailed make instruction
-
-The full syntax of the `make` command is the following, but parts of the command can be left out if you run it from other directories than the `root` (as you might already have noticed by reading the simple instructions).
-
-`<keyboard>-<subproject>-<keymap>-<target>`, where:
-
-* `<keyboard>` is the name of the keyboard, for example `planck`
-  * Use `allkb` to compile all keyboards
-* `<subproject>` is the name of the subproject (revision or sub-model of the keyboard). For example, for Ergodox it can be `ez` or `infinity`, and for Planck `rev3` or `rev4`.
-  * If the keyboard doesn't have any subprojects, it can be left out
-  * To compile the default subproject, you can leave it out, or specify `defaultsp`
-  * Use `allsp` to compile all subprojects
-* `<keymap>` is the name of the keymap, for example `algernon`
-  * Use `allkm` to compile all keymaps
-* `<target>` will be explained in more detail below.
-
-**Note:** When you leave some parts of the command out, you should also remove the dash (`-`).
-
-As mentioned above, there are some shortcuts, when you are in a:
-
-* `keyboard` folder, the command will automatically fill the `<keyboard>` part. So you only need to type `<subproject>-<keymap>-<target>`
-* `subproject` folder, it will fill in both `<keyboard>` and `<subproject>`
-* `keymap` folder, then `<keyboard>` and `<keymap>` will be filled in. If you need to specify the `<subproject>` use the following syntax `<subproject>-<target>`
-  * Note in order to support this shortcut, the keymap needs its own Makefile (see the example [here](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap_makefile_example.mk))
-* `keymap` folder of a `subproject`, then everything except the `<target>` will be filled in
-
-The `<target>` means the following
-* If no target is given, then it's the same as `all` below
-* `all` compiles the keyboard and generates a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests.
-* `dfu`, `teensy` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for Infinity keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. **Note** that some operating systems needs root access for these commands to work, so in that case you need to run for example `sudo make dfu`.
-* `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.
-
-Some other targets are supported but, but not important enough to be documented here. Check the source code of the make files for more information.
-
-You can also add extra options at the end of the make command line, after the target
-
-* `make COLOR=false` - turns off color output
-* `make SILENT=true` - turns off output besides errors/warnings
-* `make VERBOSE=true` - outputs all of the gcc stuff (not interesting, unless you need to debug)
-* `make EXTRAFLAGS=-E` - Preprocess the code without doing any compiling (useful if you are trying to debug #define commands)
-
-The make command itself also has some additional options, type `make --help` for more information. The most useful is probably `-jx`, which specifies that you want to compile using more than one CPU, the `x` represents the number of CPUs that you want to use. Setting that can greatly reduce the compile times, especially if you are compiling many keyboards/keymaps. I usually set it to one less than the number of CPUs that I have, so that I have some left for doing other things while it's compiling. Note that not all operating systems and make versions supports that option.
-
-Here are some examples commands
-
-* `make allkb-allsp-allkm` builds everything (all keyboards, all subprojects, all keymaps). Running just `make` from the `root` will also run this.
-* `make` from within a `keyboard` directory, is the same as `make keyboard-allsp-allkm`, which compiles all subprojects and keymaps of the keyboard. **NOTE** that this behaviour has changed. Previously it compiled just the default keymap.
-* `make ergodox-infinity-algernon-clean` will clean the build output of the Ergodox Infinity keyboard. This example uses the full syntax and can be run from any folder with a `Makefile`
-* `make dfu COLOR=false` from within a keymap folder, builds and uploads the keymap, but without color output.
-
-## The `Makefile`
-
-There are 5 different `make` and `Makefile` locations:
-
-* root (`/`)
-* keyboard (`/keyboards/<keyboard>/`)
-* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/`)
-* subproject (`/keyboards/<keyboard>/<subproject>`)
-* subproject keymap (`/keyboards/<keyboard>/<subproject>/keymaps/<keymap>`)
-
-The root contains the code used to automatically figure out which keymap or keymaps to compile based on your current directory and commandline arguments. It's considered stable, and shouldn't be modified. The keyboard one will contain the MCU set-up and default settings for your keyboard, and shouldn't be modified unless you are the producer of that keyboard. The keymap Makefile can be modified by users, and is optional. It is included automatically if it exists. You can see an example [here](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap_makefile_example.mk) - the last few lines are the most important. The settings you set here will override any defaults set in the keyboard Makefile. **The file is required if you want to run `make` in the keymap folder.**
-
-For keyboards and subprojects, the make files are split in two parts `Makefile` and `rules.mk`. All settings can be found in the `rules.mk` file, while the `Makefile` is just there for support and including the root `Makefile`. Keymaps contain just one `Makefile` for simplicity.
-
-### Makefile options
-
-Set these variables to `no` to disable them, and `yes` to enable them.
-
-`BOOTMAGIC_ENABLE`
-
-This allows you to hold a key and the salt key (space by default) and have access to a various EEPROM settings that persist over power loss. It's advised you keep this disabled, as the settings are often changed by accident, and produce confusing results that makes it difficult to debug. It's one of the more common problems encountered in help sessions.
-
-Consumes about 1000 bytes.
-
-`MOUSEKEY_ENABLE`
-
-This gives you control over cursor movements and clicks via keycodes/custom functions.
-
-`EXTRAKEY_ENABLE`
-
-This allows you to use the system and audio control key codes.
-
-`CONSOLE_ENABLE`
-
-This allows you to print messages that can be read using [`hid_listen`](https://www.pjrc.com/teensy/hid_listen.html). 
-
-By default, all debug (*dprint*) print (*print*, *xprintf*), and user print (*uprint*) messages will be enabled. This will eat up a significant portion of the flash and may make the keyboard .hex file too big to program. 
-
-To disable debug messages (*dprint*) and reduce the .hex file size, include `#define NO_DEBUG` in your `config.h` file.
-
-To disable print messages (*print*, *xprintf*) and user print messages (*uprint*) and reduce the .hex file size, include `#define NO_PRINT` in your `config.h` file.
-
-To disable print messages (*print*, *xprintf*) and **KEEP** user print messages (*uprint*), include `#define USER_PRINT` in your `config.h` file.
-
-To see the text, open `hid_listen` and enjoy looking at your printed messages.
-
-**NOTE:** Do not include *uprint* messages in anything other than your keymap code. It must not be used within the QMK system framework. Otherwise, you will bloat other people's .hex files. 
-
-Consumes about 400 bytes.
-
-`COMMAND_ENABLE`
-
-This enables magic commands, typically fired with the default magic key combo `LSHIFT+RSHIFT+KEY`. Magic commands include turning on debugging messages (`MAGIC+D`) or temporarily toggling NKRO (`MAGIC+N`).
-
-`SLEEP_LED_ENABLE`
-
-Enables your LED to breath while your computer is sleeping. Timer1 is being used here. This feature is largely unused and untested, and needs updating/abstracting.
-
-`NKRO_ENABLE`
-
-This allows the keyboard to tell the host OS that up to 248 keys are held down at once (default without NKRO is 6). NKRO is off by default, even if `NKRO_ENABLE` is set. NKRO can be forced by adding `#define FORCE_NKRO` to your config.h or by binding `MAGIC_TOGGLE_NKRO` to a key and then hitting the key.
-
-`BACKLIGHT_ENABLE`
-
-This enables your backlight on Timer1 and ports B5, B6, or B7 (for now). You can specify your port by putting this in your `config.h`:
-
-    #define BACKLIGHT_PIN B7
-
-`MIDI_ENABLE`
-
-This enables MIDI sending and receiving with your keyboard. To enter MIDI send mode, you can use the keycode `MI_ON`, and `MI_OFF` to turn it off. This is a largely untested feature, but more information can be found in the `quantum/quantum.c` file.
-
-`UNICODE_ENABLE`
-
-This allows you to send unicode symbols via `UC(<unicode>)` in your keymap. Only codes up to 0x7FFF are currently supported.
-
-`UNICODEMAP_ENABLE`
-
-This allows sending unicode symbols using `X(<unicode>)` in your keymap. Codes
-up to 0xFFFFFFFF are supported, including emojis. You will need to maintain
-a separate mapping table in your keymap file.
-
-Known limitations:
-- Under Mac OS, only codes up to 0xFFFF are supported.
-- Under Linux ibus, only codes up to 0xFFFFF are supported (but anything important is still under this limit for now).
-
-Characters out of range supported by the OS will be ignored.
-
-`BLUETOOTH_ENABLE`
-
-This allows you to interface with a Bluefruit EZ-key to send keycodes wirelessly. It uses the D2 and D3 pins.
-
-`AUDIO_ENABLE`
-
-This allows you output audio on the C6 pin (needs abstracting). See the [audio section](#audio-output-from-a-speaker) for more information.
-
-`FAUXCLICKY_ENABLE`
-
-Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as AUDIO_ENABLE.
-
-`VARIABLE_TRACE`
-
-Use this to debug changes to variable values, see the [tracing variables](#tracing-variables) section for more information.
-
-`API_SYSEX_ENABLE`
-
-This enables using the Quantum SYSEX API to send strings (somewhere?)
-
-This consumes about 5390 bytes.
-
-### Customizing Makefile options on a per-keymap basis
-
-If your keymap directory has a file called `Makefile` (note the filename), any Makefile options you set in that file will take precedence over other Makefile options for your particular keyboard.
-
-So let's say your keyboard's makefile has `BACKLIGHT_ENABLE = yes` (or maybe doesn't even list the `BACKLIGHT_ENABLE` option, which would cause it to be off). You want your particular keymap to not have the debug console, so you make a file called `Makefile` and specify `BACKLIGHT_ENABLE = no`.
-
-You can use the `doc/keymap_makefile_example.md` as a template/starting point.

docs/Memory-write-error,-use-debug-for-more-info.md

@@ -1,21 +0,0 @@
-In rare circumstances, your keyboard/device can become unwritable, and `dfu-programmer` will give you an error like this:  
-
-    Erasing flash...  Success
-    Checking memory from 0x0 to 0x6FFF...  Empty.
-    Checking memory from 0x0 to 0x607F...  Empty.
-    0%                            100%  Programming 0x6080 bytes...
-    [ X  ERROR
-    Memory write error, use debug for more info.
-
-Currently the only way to solve this is to [reprogram the chip via ISP](https://www.reddit.com/r/olkb/comments/4rjzen/flashing_error_on_mac_os_x/d52rj8o/). This requires another device to be hooked up to a couple of exposed pins on the PCB. There is a guide on how to do this [here](https://learn.sparkfun.com/tutorials/installing-an-arduino-bootloader), and [this is where things are on the Planck PCB](http://imgur.com/lvbxbHt).
-
-An example command to flash the board once things are hooked up is:
-
-    avrdude -c usbtiny -p m32u4 -U flash:w:planck_default_rev4.hex
-
-Research is still being done on why this happens, but here are some cases:
-
-* [`make -f Makefile.rn42 dfu` and not the dfu-programmer commands worked for @tybenz](https://github.com/tmk/tmk_keyboard/issues/316) - also see [the hhkb keyboard on tmk](https://github.com/tmk/tmk_keyboard/tree/master/keyboard/hhkb)
-* [Doing a force erase works here](https://geekhack.org/index.php?topic=12047.msg1520147#msg1520147)
-* [`dfu-programmer atmega32u4 erase --force` works here as well](https://forum.fhem.de/index.php?topic=29777.0) [DE]
-* [Unresolved, but some data dumps](https://github.com/dfu-programmer/dfu-programmer/issues/29)

docs/Modding-your-keyboard.md

@@ -1,379 +0,0 @@
-
-## Audio output from a speaker
-
-Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any keyboard that allows access to the C6 port, you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
-
-The audio code lives in [quantum/audio/audio.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/audio.h) and in the other files in the audio directory. It's enabled by default on the Planck [stock keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/default/keymap.c). Here are the important bits:
-
-```
-#include "audio.h"
-```
-
-Then, lower down the file:
-
-```
-float tone_startup[][2] = {
-    ED_NOTE(_E7 ),
-    E__NOTE(_CS7),
-    E__NOTE(_E6 ),
-    E__NOTE(_A6 ),
-    M__NOTE(_CS7, 20)
-};
-```
-
-This is how you write a song. Each of these lines is a note, so we have a little ditty composed of five notes here.
-
-Then, we have this chunk:
-
-```
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-float tone_plover[][2]     = SONG(PLOVER_SOUND);
-float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
-
-float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
-float goodbye[][2] = SONG(GOODBYE_SOUND);
-```
-
-Wherein we bind predefined songs (from [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h)) into named variables. This is one optimization that helps save on memory: These songs only take up memory when you reference them in your keymap, because they're essentially all preprocessor directives.
-
-So now you have something called `tone_plover` for example. How do you make it play the Plover tune, then? If you look further down the keymap, you'll see this:
-
-```
-PLAY_NOTE_ARRAY(tone_plover, false, 0); // Signature is: Song name, repeat, rest style
-```
-
-This is inside one of the macros. So when that macro executes, your keyboard plays that particular chime.
-
-"Rest style" in the method signature above (the last parameter) specifies if there's a rest (a moment of silence) between the notes.
-
-
-## Recording And Playing back Music
-* ```Music On``` - Turn music mode on. The default mapping is ```Lower+Upper+C```
-* ```LCTL``` - start a recording
-* play some tones
-* ```LALT``` - stop recording, stop playing
-* ```LGUI``` - play recording
-* ```LALT``` - stop playing
-* ```Music Off``` - Turn music mode off. The default mapping is ```Lower+Upper+V```
-
-
-## MIDI functionalty
-
-This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile.
-
-## Bluetooth functionality
-
-This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will.
-
-## RGB Under Glow Mod
-
-![Planck with RGB Underglow](https://raw.githubusercontent.com/qmk/qmk_firmware/master/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg)
-
-Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY).
-
-For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring the VCC, GND, and DI, you can enable the underglow in your Makefile.
-
-    RGBLIGHT_ENABLE = yes
-
-In order to use the underglow animation functions, you need to have `#define RGBLIGHT_ANIMATIONS` in your `config.h`.
-
-Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default:
-
-    #define RGB_DI_PIN F4     // The pin your RGB strip is wired to
-    #define RGBLIGHT_ANIMATIONS    // Require for fancier stuff (not compatible with audio)
-    #define RGBLED_NUM 14     // Number of LEDs
-    #define RGBLIGHT_HUE_STEP 10
-    #define RGBLIGHT_SAT_STEP 17
-    #define RGBLIGHT_VAL_STEP 17
-
-You'll need to edit `RGB_DI_PIN` to the pin you have your `DI` on your RGB strip wired to.
-
-The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. For details, please check this keymap. `keyboards/planck/keymaps/yang/keymap.c`
-
-### WS2812 Wiring
-
-![WS2812 Wiring](https://raw.githubusercontent.com/qmk/qmk_firmware/master/keyboards/planck/keymaps/yang/WS2812-wiring.jpg)
-
-Please note the USB port can only supply a limited amount of power to the keyboard (500mA by standard, however, modern computer and most usb hubs can provide 700+mA.). According to the data of NeoPixel from Adafruit, 30 WS2812 LEDs require a 5V 1A power supply, LEDs used in this mod should not more than 20.
-
-## PS/2 Mouse Support
-
-Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device.
-
-To hook up a Trackpoint, you need to obtain a Trackpoint module (i.e. harvest from a Thinkpad keyboard), identify the function of each pin of the module, and make the necessary circuitry between controller and Trackpoint module. For more information, please refer to [Trackpoint Hardware](https://deskthority.net/wiki/TrackPoint_Hardware) page on Deskthority Wiki.
-
-There are three available modes for hooking up PS/2 devices: USART (best), interrupts (better) or busywait (not recommended).
-
-### Busywait version
-
-Note: This is not recommended, you may encounter jerky movement or unsent inputs. Please use interrupt or USART version if possible.
-
-In rules.mk:
-
-```
-PS2_MOUSE_ENABLE = yes
-PS2_USE_BUSYWAIT = yes
-```
-
-In your keyboard config.h:
-
-```
-#ifdef PS2_USE_BUSYWAIT
-#   define PS2_CLOCK_PORT  PORTD
-#   define PS2_CLOCK_PIN   PIND
-#   define PS2_CLOCK_DDR   DDRD
-#   define PS2_CLOCK_BIT   1
-#   define PS2_DATA_PORT   PORTD
-#   define PS2_DATA_PIN    PIND
-#   define PS2_DATA_DDR    DDRD
-#   define PS2_DATA_BIT    2
-#endif
-```
-
-### Interrupt version
-
-The following example uses D2 for clock and D5 for data. You can use any INT or PCINT pin for clock, and any pin for data.
-
-In rules.mk:
-
-```
-PS2_MOUSE_ENABLE = yes
-PS2_USE_INT = yes
-```
-
-In your keyboard config.h:
-
-```
-#ifdef PS2_USE_INT
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   2
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    5
-
-#define PS2_INT_INIT()  do {    \
-    EICRA |= ((1<<ISC21) |      \
-              (0<<ISC20));      \
-} while (0)
-#define PS2_INT_ON()  do {      \
-    EIMSK |= (1<<INT2);         \
-} while (0)
-#define PS2_INT_OFF() do {      \
-    EIMSK &= ~(1<<INT2);        \
-} while (0)
-#define PS2_INT_VECT   INT2_vect
-#endif
-```
-
-### USART version
-
-To use USART on the ATMega32u4, you have to use PD5 for clock and PD2 for data. If one of those are unavailable, you need to use interrupt version.
-
-In rules.mk:
-
-```
-PS2_MOUSE_ENABLE = yes
-PS2_USE_USART = yes
-```
-
-In your keyboard config.h:
-
-```
-#ifdef PS2_USE_USART
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   5
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    2
-
-/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
-/* set DDR of CLOCK as input to be slave */
-#define PS2_USART_INIT() do {   \
-    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
-    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
-    UCSR1C = ((1 << UMSEL10) |  \
-              (3 << UPM10)   |  \
-              (0 << USBS1)   |  \
-              (3 << UCSZ10)  |  \
-              (0 << UCPOL1));   \
-    UCSR1A = 0;                 \
-    UBRR1H = 0;                 \
-    UBRR1L = 0;                 \
-} while (0)
-#define PS2_USART_RX_INT_ON() do {  \
-    UCSR1B = ((1 << RXCIE1) |       \
-              (1 << RXEN1));        \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
-    UCSR1B = (1 << RXEN1);          \
-} while (0)
-#define PS2_USART_OFF() do {    \
-    UCSR1C = 0;                 \
-    UCSR1B &= ~((1 << RXEN1) |  \
-                (1 << TXEN1));  \
-} while (0)
-#define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
-#define PS2_USART_RX_DATA       UDR1
-#define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
-#define PS2_USART_RX_VECT       USART1_RX_vect
-#endif
-```
-
-### Additional Settings
-
-#### PS/2 mouse features
-
-These enable settings supported by the PS/2 mouse protocol: http://www.computer-engineering.org/ps2mouse/
-
-```
-/* Use remote mode instead of the default stream mode (see link) */
-#define PS2_MOUSE_USE_REMOTE_MODE  
-
-/* Enable the scrollwheel or scroll gesture on your mouse or touchpad */
-#define PS2_MOUSE_ENABLE_SCROLLING
-
-/* Some mice will need a scroll mask to be configured. The default is 0xFF. */
-#define PS2_MOUSE_SCROLL_MASK 0x0F
-
-/* Applies a transformation to the movement before sending to the host (see link) */
-#define PS2_MOUSE_USE_2_1_SCALING
-
-/* The time to wait after initializing the ps2 host */
-#define PS2_MOUSE_INIT_DELAY 1000 /* Default */
-```
-
-You can also call the following functions from ps2_mouse.h
-
-```
-void ps2_mouse_disable_data_reporting(void);
-
-void ps2_mouse_enable_data_reporting(void);
-
-void ps2_mouse_set_remote_mode(void);
-
-void ps2_mouse_set_stream_mode(void);
-
-void ps2_mouse_set_scaling_2_1(void);
-
-void ps2_mouse_set_scaling_1_1(void);
-
-void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution);
-
-void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate);
-```
-
-#### Fine control
-
-Use the following defines to change the sensitivity and speed of the mouse.
-Note: you can also use `ps2_mouse_set_resolution` for the same effect (not supported on most touchpads).
-
-```
-#define PS2_MOUSE_X_MULTIPLIER 3
-#define PS2_MOUSE_Y_MULTIPLIER 3
-#define PS2_MOUSE_V_MULTIPLIER 1
-```
-
-#### Scroll button
-
-If you're using a trackpoint, you will likely want to be able to use it for scrolling.
-Its possible to enable a "scroll button/s" that when pressed will cause the mouse to scroll instead of moving.
-To enable the feature, you must set a scroll button mask as follows:
-
-```
-#define PS2_MOUSE_SCROLL_BTN_MASK (1<<PS2_MOUSE_BUTTON_MIDDLE) /* Default */
-```
-
-To disable the scroll button feature:
-
-```
-#define PS2_MOUSE_SCROLL_BTN_MASK 0
-```
-
-The available buttons are:
-
-```
-#define PS2_MOUSE_BTN_LEFT      0
-#define PS2_MOUSE_BTN_RIGHT     1
-#define PS2_MOUSE_BTN_MIDDLE    2
-```
-
-You can also combine buttons in the mask by `|`ing them together.
-
-Once you've configured your scroll button mask, you must configure the scroll button send interval.
-This is the interval before which if the scroll buttons were released they would be sent to the host.
-After this interval, they will cause the mouse to scroll and will not be sent.
-
-```
-#define PS2_MOUSE_SCROLL_BTN_SEND 300 /* Default */
-```
-
-To disable sending the scroll buttons:
-```
-#define PS2_MOUSE_SCROLL_BTN_SEND 0
-```
-
-Fine control over the scrolling is supported with the following defines:
-
-```
-#define PS2_MOUSE_SCROLL_DIVISOR_H 2
-#define PS2_MOUSE_SCROLL_DIVISOR_V 2
-```
-
-#### Debug settings
-
-To debug the mouse, add `debug_mouse = true` or enable via bootmagic.
-
-```
-/* To debug the mouse reports */
-#define PS2_MOUSE_DEBUG_HID
-#define PS2_MOUSE_DEBUG_RAW
-```
-
-## Safety Considerations
-
-You probably don't want to "brick" your keyboard, making it impossible
-to rewrite firmware onto it.  Here are some of the parameters to show
-what things are (and likely aren't) too risky.
-
-- If your keyboard map does not include RESET, then, to get into DFU
-  mode, you will need to press the reset button on the PCB, which
-  requires unscrewing the bottom.
-- Messing with tmk_core / common files might make the keyboard
-  inoperable
-- Too large a .hex file is trouble; `make dfu` will erase the block,
-  test the size (oops, wrong order!), which errors out, failing to
-  flash the keyboard, leaving it in DFU mode.
-  - To this end, note that the maximum .hex file size on Planck is
-    7000h (28672 decimal)
-
-```
-Linking: .build/planck_rev4_cbbrowne.elf                                                            [OK]
-Creating load file for Flash: .build/planck_rev4_cbbrowne.hex                                       [OK]
-
-Size after:
-   text    data     bss     dec     hex filename
-      0   22396       0   22396    577c planck_rev4_cbbrowne.hex
-```
-
-  - The above file is of size 22396/577ch, which is less than
-    28672/7000h
-  - As long as you have a suitable alternative .hex file around, you
-    can retry, loading that one
-  - Some of the options you might specify in your keyboard's Makefile
-    consume extra memory; watch out for BOOTMAGIC_ENABLE,
-    MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE, API_SYSEX_ENABLE
-- DFU tools do /not/ allow you to write into the bootloader (unless
-  you throw in extra fruitsalad of options), so there is little risk
-  there.
-- EEPROM has around a 100000 write cycle.  You shouldn't rewrite the
-  firmware repeatedly and continually; that'll burn the EEPROM
-  eventually.
-

docs/Mouse-keys.md

@@ -1,17 +0,0 @@
-# Can I increase the speed of the mouse keys?
-
-**Q:** The default speed for controlling the mouse with the keyboard is slow. I've tried increasing the mouse's sensitivity at work using xset m and it worked, although sometimes it changes by itself for some reason. At home, on Arch Linux, this does not change ti. I've looked through the forums and resolved to use libinput using xinput but using that I only manage to change the speed of the mouse using the actual mouse. The speed of the mouse using the keyboard controls remained unchanged.
-Is there perhaps something I can input in the keymap.c to change the sensitivity? Or some other surefire way of increasing the speed?
-Thanks!
-
-**A:**  In your keymap's config.h:
-
-```
-#define MOUSEKEY_INTERVAL       20
-#define MOUSEKEY_DELAY          0
-#define MOUSEKEY_TIME_TO_MAX    60
-#define MOUSEKEY_MAX_SPEED      7
-#define MOUSEKEY_WHEEL_DELAY 0
-```
-
-Tweak away. A lower interval or higher max speed will effectively make the mouse move faster. Time-to-max controls acceleration. (See [this Reddit thread for the original discussion](https://www.reddit.com/r/ErgoDoxEZ/comments/61fwr2/a_reliable_way_to_increase_the_speed_of_the_mouse/)).

docs/Other-Projects.md

@@ -1,62 +0,0 @@
-Keyboard Firmware Projects other than TMK
-================================
-## PJRC USB Keyboard/Mouse Example[USB][PJRC][Teensy][AVR]
-- <http://www.pjrc.com/teensy/usb_keyboard.html>
-- <http://www.pjrc.com/teensy/usb_mouse.html>
- 
-## kbupgrade[USB][V-USB][AVR]
-- <http://github.com/rhomann/kbupgrade>
-- <http://geekhack.org/showwiki.php?title=Island:8406>
- 
-## c64key[USB][V-USB][AVR]
-- <http://symlink.dk/projects/c64key/>
- 
-## rump[USB][V-USB][AVR]
-- <http://mg8.org/rump/>
-- <http://github.com/clee/rump>
- 
-## dulcimer[USB][V-USB][AVR]
-- <http://www.schatenseite.de/dulcimer.html>
- 
-## humblehacker-keyboard[USB][LUFA][AVR][Ergo]
-- <http://github.com/humblehacker>
-- <http://www.humblehacker.com/keyboard/>
-- <http://geekhack.org/showwiki.php?title=Island:6292>
- 
-## ps2avr[PS/2][AVR]
-- <http://sourceforge.net/projects/ps2avr/>
- 
-## ErgoDox[Ergo][Split][USB][AVR]
-- <http://geekhack.org/index.php?topic=22780.0>
-- <https://github.com/benblazak/ergodox-firmware>
-- <https://github.com/cub-uanic/tmk_keyboard>
- 
-## Suka's keyboard collection[Ergo][Split][3DPrinting][USB][AVR]
-- <http://deskthority.net/workshop-f7/my-diy-keyboard-collection-or-how-i-became-a-kb-geek-t2534.html>
-- <https://github.com/frobiac/adnw>
- 
-## bpiphany's AVR-Keyboard[PJRC][AVR][USB]
-- <https://github.com/BathroomEpiphanies/AVR-Keyboard>
-- <http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions>
-- <http://deskthority.net/wiki/Phantom>
- 
-## USB-USB keyboard remapper[converter][USB-USB][AVR][Arduino]
-- <http://forum.colemak.com/viewtopic.php?pid=10837>
-- <https://github.com/darkytoothpaste/keymapper>
- 
-## USB-USB converter threads[converter][USB-USB]
-- <http://deskthority.net/workshop-f7/is-remapping-a-usb-keyboard-using-teensy-possible-t2841-30.html>
-- <http://geekhack.org/index.php?topic=19458.0>
- 
-## kbdbabel.org[converter][vintage][protocol][8051]
-Great resource of vintage keyboard protocol information and code
-
-- <http://www.kbdbabel.org/>
- 
-## Haata's kiibohd Controller[converter][vintage][protocol][AVR][PJRC][Cortex]
-A lots of vintage keyboard protocol supports
- 
-- <https://github.com/kiibohd/controller>
- 
-## Kinesis ergonomic keyboard firmware replacement[V-USB][LUFA][Ergo]
-- <https://github.com/chrisandreae/kinesis-firmware>

docs/PCB_GUIDE.md

@@ -1,151 +0,0 @@
-# Planck Firmware Guide
-
-## Setting up the environment
-
-### Windows
-1. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**.
-2. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location.
-3. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/qmk/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer.
-4. Right-click on the 1-setup-path-win batch script, select "Run as administrator", and accept the User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up.
-5. Right-click on the 2-setup-environment-win batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete!
-
-
-### Mac
-
-If you're using homebrew, you can use the following commands:
-
-    brew tap osx-cross/avr
-    brew install avr-libc
-    brew install dfu-programmer
-
-Otherwise, these instructions will work:
-
-1. Install Xcode from the App Store.
-2. Install the Command Line Tools from `Xcode->Preferences->Downloads`.
-3. Install [DFU-Programmer][dfu-prog].
-
-### Linux
-1. Install AVR GCC with your favorite package manager.
-2. Install [DFU-Programmer][dfu-prog].
-
-Note that, since it will be directly accessing USB hardware, the
-`dfu-programmer` program needs to be run as root.
-
-## Verify Your Installation
-1. Clone the following repository: https://github.com/qmk/qmk_firmware
-2. Open a Terminal and `cd` into `qmk_firmware/keyboards/planck`
-3. Run `make`. This should output a lot of information about the build process.
-
-## Using the built-in functions
-
-Here is a list of some of the functions available from the command line:
-
-* `make clean`: clean the environment - may be required in-between builds
-* `make`: compile the code
-* `make KEYMAP=<keymap>`: compile with the extended keymap file `extended_keymaps/extended_keymap_<keymap>.c`
-* `make dfu`: build and flash the layout to the PCB
-* `make dfu-force`: build and force-flash the layout to the PCB (may be require for first flash)
-
-Generally, the instructions to flash the PCB are as follows:
-
-1. Make changes to the appropriate keymap file
-2. Save the file
-3. `make clean`
-4. Press the reset button on the PCB/press the key with the `RESET` keycode
-5. `make <arguments> dfu` - use the necessary `KEYMAP=<keymap>` and/or `COMMON=true` arguments here.
-
-## Troubleshooting
-If you see something like this
-
-          0 [main] sh 13384 sync_with_child: child 9716(0x178) died before initialization with status code 0xC0000142
-        440 [main] sh 13384 sync_with_child: *** child state waiting for longjmp
-    /usr/bin/sh: fork: Resource temporarily unavailable
-
-after running 'make' on Windows than you are encountering a very popular issue with WinAVR on Windows 8.1 and 10.
-You can easily fix this problem by replacing msys-1.0.dll in WinAVR/utils/bin with [this one](http://www.madwizard.org/download/electronics/msys-1.0-vista64.zip).
-Restart your system and everything should work fine!
-
-
-If you see this
-
-    dfu-programmer atmega32u4 erase
-    process_begin: CreateProcess(NULL, dfu-programmer atmega32u4 erase, ...) failed.
-    make (e=2): The system cannot find the file specified.
-    make: *** [dfu] Error 2
-
-when trying to 'make dfu' on Windows you need to copy the dfu-programmer.exe to qmk_firmware/keyboards/planck.
-
-
-## Quantum MK Firmware
-
-### Keymap
-
-Unlike the other keymaps, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/qmk/qmk_firmware/blob/master/quantum/keymap_common.h).
-
-You can use modifiers with keycodes like this:
-
-    LCTL(KC_C)
-    
-Which will generate Ctrl+c. These are daisy-chainable, meaning you can do things like:
-
-    LCTL(LALT(KC_C))
-    
-That will generate Ctrl+Alt+c. The entire list of these functions is here:
-
-* `LCTL()`: Left control
-* `LSFT()` / `S()`: Left shift
-* `LALT()`: Left alt/opt
-* `LGUI()`: Left win/cmd
-* `RCTL()`: Right control
-* `RSFT()`: Right shift
-* `RALT()`: Right alt/opt
-* `RGUI()`: Right win/cmd
-
-`S(KC_1)`-like entries are useful in writing keymaps for the Planck.
-
-### Other keycodes
-
-A number of other keycodes have been added that you may find useful:
-
-* `CM_<key>`: the Colemak equivalent of a key (in place of `KC_<key>`), when using Colemak in software (`CM_O` generates `KC_SCLN`)
-* `RESET`: jump to bootloader for flashing (same as press the reset button)
-* `BL_STEP`: step through the backlight brightnesses
-* `BL_<0-15>`: set backlight brightness to 0-15
-* `BL_DEC`: lower the backlight brightness
-* `BL_INC`: raise the backlight brightness
-* `BL_TOGG`: toggle the backlight on/off
-
-### Function layers
-
-The extended keymap extends the number of function layers from 32 to the near-infinite value of 256. Rather than using `FN<num>` notation (still available, but limited to `FN0`-`FN31`), you can use the `FUNC(<num>)` notation. `F(<num>)` is a shortcut for this.
-
-The function actions are unchanged, and you can see the full list of them [here](https://github.com/jackhumbert/tmk_keyboard/blob/master/common/action_code.h). They are explained in detail [here](https://github.com/jackhumbert/tmk_keyboard/blob/master/doc/keymap.md#2-action).
-
-### Macros
-
-Macros have been setup in the `keymaps/keymap_default.c` file so that you can use `M(<num>)` to access a macro in the `action_get_macro` section on your keymap. The switch/case structure you see here is required, and is setup for `M(0)` - you'll need to copy and paste the code to look like this (e.g. to support `M(3)`):
-
-    switch(id) {
-      case 0:
-        return MACRODOWN(TYPE(KC_A), END);
-        break;
-      case 1:
-        return MACRODOWN(TYPE(KC_B), END);
-        break;
-      case 2:
-        return MACRODOWN(TYPE(KC_C), END);
-        break;
-      case 3:
-        return MACRODOWN(TYPE(KC_D), END);
-        break;
-    } 
-    return MACRO_NONE;
-
-`MACRODOWN()` is a shortcut for `(record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)` which tells the macro to execute when the key is pressed. Without this, the macro will be executed on both the down and up stroke.
-
-[cygwin]:       https://www.cygwin.com/
-[mingw]:        http://www.mingw.org/
-[mhv]:          https://infernoembedded.com/products/avr-tools
-[winavr]:       http://winavr.sourceforge.net/
-[crosspack]:    http://www.obdev.at/products/crosspack/index.html
-[dfu-prog]:     http://dfu-programmer.sourceforge.net/

docs/Porting-your-keyboard-to-QMK.md

@@ -1,59 +0,0 @@
-If your keyboard is running an Atmega chip (atmega32u4 and others), it's pretty easy to get things setup for compiling your own firmware to flash onto your board. There is a `/util/new_project.sh <keyboard>` script to help get you started - you can simply pass your keyboard's name into the script, and all of the necessary files will be created. The components of each are described below.
-
-## `/keyboards/<keyboard>/config.h`
-
-The `USB Device descriptor parameter` block contains parameters are used to uniquely identify your keyboard, but they don't really matter to the machine.
-
-Your `MATRIX_ROWS` and `MATRIX_COLS` are the numbers of rows and cols in your keyboard matrix - this may be different than the number of actual rows and columns on your keyboard. There are some tricks you can pull to increase the number of keys in a given matrix, but most keyboards are pretty straight-forward.
-
-The `MATRIX_ROW_PINS` and `MATRIX_COL_PINS` are the pins your MCU uses on each row/column. Your schematic (if you have one) will have this information on it, and the values will vary depending on your setup. This is one of the most important things to double-check in getting your keyboard setup correctly.
-
-For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the diodes in the `COL2ROW` position, but it's possible that they are in the other - people coming from EasyAVR often use `ROW2COL`. Nothing will function if this is incorrect.
-
-`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported.
-
-`BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap.
-
-`BACKLIGHT_LEVELS` is how many levels exist for your backlight - max is 15, and they are computed automatically from this number.
-
-## `/keyboards/<keyboard>/Makefile`
-
-The values at the top likely won't need to be changed, since most boards use the `atmega32u4` chip. The `BOOTLOADER_SIZE` will need to be adjusted based on your MCU type. It's defaulted to the Teensy, since that's the most common controller. Below is quoted from the `Makefile`.
-
-```
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-```
-
-At the bottom of the file, you'll find lots of features to turn on and off - all of these options should be set with `?=` to allow for the keymap overrides. `?=` only assigns if the variable was previously undefined. For the full documenation of these features, see the [Makefile options](#makefile-options).
-
-## `/keyboards/<keyboard>/readme.md`
-
-This is where you'll describe your keyboard - please write as much as you can about it! Talking about default functionality/features is useful here. Feel free to link to external pages/sites if necessary. Images can be included here as well. This file will be rendered into a webpage at qmk.fm/keyboards/<keyboard>/.
-
-## `/keyboards/<keyboard>/<keyboard>.c`
-
-This is where all of the custom logic for your keyboard goes - you may not need to put anything in this file, since a lot of things are configured automatically. All of the `*_kb()` functions are defined here. If you modify them, remember to keep the calls to `*_user()`, or things in the keymaps might not work. You can read more about the functions [here](#custom-quantum-functions-for-keyboards-and-keymaps)
-
-## `/keyboards/<keyboard>/<keyboard>.h`
-
-Here is where you can (optionally) define your `KEYMAP` function to remap your matrix into a more readable format. With ortholinear boards, this isn't always necessary, but it can help to accomodate the dead spots on your matrix, where there are keys that take up more than one space (2u, staggering, 6.25u, etc). The example shows the difference between the physical keys, and the matrix design:
-
-```
-#define KEYMAP( \
-    k00, k01, k02, \
-      k10,  k11   \
-) \
-{ \
-    { k00, k01,   k02 }, \
-    { k10, KC_NO, k11 }, \
-}
-```
-
-Each of the `kxx` variables needs to be unique, and usually follows the format `k<row><col>`. You can place `KC_NO` where your dead keys are in your matrix.
-

docs/Previously-Asked-Questions.asciidoc

@@ -1,14 +0,0 @@
-= Previously Asked Questions
-:toc:
-:toc-placement: preamble
-
-toc::[]
-
-= Question thread
-http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177-270.html
-
-= Questions
-== Columns beyond 16(uint16_t) cannot be read
-* https://github.com/tmk/tmk_keyboard/wiki/FAQ#cant-read-comlumn-of-matrix-beyond-16
-* http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177-270.html#p247051
-* http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279

docs/QMK-Overview.md

@@ -1,75 +0,0 @@
-# QMK Overview
-
-This page attempts to explain the basic information you need to know to work with the QMK project. It assumes that you are familiar with navigating a UNIX shell, but does not assume you are familiar with C or with compiling using make.
-
-# Basic QMK structure
-
-QMK is a fork of @tmk's [tmk_keyboard](https://github.com/tmk/tmk_keyboard) project. The original TMK code, with modifications, can be found in the `tmk` folder. The QMK additions to the project may be found in the `quantum` folder. Keyboard projects may be found in the `handwired` and `keyboard` folders.
-
-## Keyboard project structure
-
-Within the `handwired` and `keyboard` folders is a directory for each keyboard project, for example `qmk_firmware/keyboards/clueboard`. Within you'll find the following structure:
-
-* `keymaps/`: Different keymaps that can be built
-* `rules.mk`: The file that sets the default "make" options. Do not edit this file directly, instead use a keymap specific `Makefile`.
-* `config.h`: The file that sets the default compile time options. Do not edit this file directly, instead use a keymap specific `config.h`.
-
-### Keymap structure
-
-In every keymap folder, the following files may be found. Only `keymap.c` is required, if the rest of the files are not found the default options will be chosen.
-
-* `config.h`: the options to configure your keymap
-* `keymap.c`: all of your keymap code, required
-* `Makefile`: the features of QMK that are enabled, required to run `make` in your keymap folder
-* `readme.md`: a description of your keymap, how others might use it, and explanations of features
-* Other files: Some people choose to include an image depicting the layout, and other files that help people to use or understand a particular keymap.
-
-# The `make` command
-
-The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). It it recommended that you always run make from within the `root` folder.
-
-**NOTE:** To abort a make command press `Ctrl-c`
-
-For more details on the QMK build process see [Make Instructions](/Make-Instructions.md).
-
-### Simple instructions for building and uploading a keyboard
-
-**Most keyboards have more specific instructions in the keyboard specific readme.md file, so please check that first**
-
-1. Enter the `root` folder
-2. Run `make <keyboard>-<subproject>-<keymap>-<programmer>`
-
-In the above commands, replace:
-
-* `<keyboard>` with the name of your keyboard
-* `<keymap>` with the name of your keymap
-* `<subproject>` with the name of the subproject (revision or sub-model of your keyboard). For example, for Ergodox it can be `ez` or `infinity`, and for Planck `rev3` or `rev4`.
-  * If the keyboard doesn't have a subproject, or if you are happy with the default (defined in `rules.mk` file of the `keyboard` folder), you can leave it out. But remember to also remove the dash (`-`) from the command.
-* `<programmer>` The programmer to use. Most keyboards use `dfu`, but some use `teensy`. Infinity keyboards use `dfu-util`. Check the readme file in the keyboard folder to find out which programmer to use.
-  * If you  don't add `-<programmer` to the command line, the firmware will be still be compiled into a hex file, but the upload will be skipped.
-
-**NOTE:** Some operating systems will refuse to program unless you run the make command as root for example `sudo make clueboard-default-dfu`
-
-## Make Examples
-
-* Build all Clueboard keymaps: `make clueboard`
-* Build the default Planck keymap: `make planck-rev4-default`
-* Build and flash your ergodox-ez: `make ergodox-ez-default-teensy`
-
-# The `config.h` file
-
-There are 2 `config.h` locations:
-
-* keyboard (`/keyboards/<keyboard>/`)
-* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/`)
-
-The keyboard `config.h` is included only if the keymap one doesn't exist. The format to use for your custom one [is here](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap_config_h_example.h). If you want to override a setting from the parent `config.h` file, you need to do this:
-
-```c
-#undef MY_SETTING
-#define MY_SETTING 4
-```
-
-For a value of `4` for this imaginary setting. So we `undef` it first, then `define` it.
-
-You can then override any settings, rather than having to copy and paste the whole thing.

docs/README.md

@@ -0,0 +1,25 @@
+# Quantum Mechanical Keyboard Firmware
+
+## What is QMK Firmware? {#what-is-qmk-firmware}
+
+QMK (*Quantum Mechanical Keyboard*) is an open source community that maintains QMK Firmware, QMK Flasher, qmk.fm, and these docs. QMK Firmware is a keyboard firmware based on the [tmk\_keyboard](http://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). It has also been ported to ARM chips using ChibiOS. You can use it to power your own hand-wired or custom keyboard PCB.
+
+## How to get it {#how-to-get-it}
+
+If you plan on contributing a keymap, keyboard, or features to QMK, the easiest thing to do is [fork the repo through Github](https://github.com/qmk/qmk_firmware#fork-destination-box), and clone your repo locally to make your changes, push them, then open a [Pull Request](https://github.com/qmk/qmk_firmware/pulls) from your fork.
+
+Otherwise, you can either download it directly ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), or clone it via git (`git@github.com:qmk/qmk_firmware.git`), or https (`https://github.com/qmk/qmk_firmware.git`).
+
+## How to compile {#how-to-compile}
+
+Before you are able to compile, you'll need to [install an environment](getting_started_build_tools.md) for AVR or/and ARM development. Once that is complete, you'll use the `make` command to build a keyboard and keymap with the following notation:
+
+    make planck/rev4:default
+
+This would build the `rev4` revision of the `planck` with the `default` keymap. Not all keyboards have revisions (also called subprojects or folders), in which case, it can be omitted:
+
+    make preonic:default
+
+## How to customize {#how-to-customize}
+
+QMK has lots of [features](features.md) to explore, and a good deal of [reference documentation](http://docs.qmk.fm) to dig through. Most features are taken advantage of by modifying your [keymap](keymap.md), and changing the [keycodes](keycodes.md).

docs/Report-Descriptor.md

@@ -1 +0,0 @@
-# Get Report Descriptor with lsusb

docs/SUMMARY.md

@@ -1,26 +0,0 @@
-
-### Getting started 
-* [Introduction](/Home.md)
-* [QMK Overview](/QMK-Overview.md)
-* [Build Environment Setup](/Build-Environment-Setup.md)
-
-### Making a keymap
-* [Keymap overview](/Keymap.md)
-* [Keycodes](/Keycodes.md)
-* [Layer switching](/Key-Functions.md)
-* [Leader Key](/Leader-Key.md)
-* [Macros](/Macros.md)
-* [Space Cadet](/Space-Cadet-Shift.md)
-* [Tap Dance](/Tap-Dance.md)
-* [Mouse keys](/Mouse-keys.md)
-* [FAQ: Creating a Keymap](/FAQ-Keymap.md)
-* [FAQ: Compiling QMK](/FAQ-Build.md)
-  
-### For hardware makers and modders
-* [Modding your keyboard](/Modding-your-keyboard.md)
-* [Porting your keyboard to QMK](/Porting-your-keyboard-to-QMK.md)
-* [Adding features to QMK](/Adding-features-to-QMK.md)
-  
-### Other topics
-* [General FAQ](/FAQ.md)
-* [Differences from TMK](/Differences-from-TMK.md)

docs/TMK-Based-Projects.md

@@ -1,34 +0,0 @@
-## TMK based projects
-Add your project here!
-See https://github.com/tmk/tmk_keyboard/issues/173
-
-### keyboards
-**S60-X**: [DIY 60% keyboard](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit?mode=guest_open) designed by [VinnyCordeiro](https://github.com/VinnyCordeiro) for Sentraq:
-- https://github.com/VinnyCordeiro/tmk_keyboard
-
-**Octagon V1**: Korean custom keyboard designed by Duck.
-- https://github.com/xauser/tmk_keyboard/tree/xauser
-
-**Compact L3**: Custom keyboard designed by LifeZone and LeeKu.
-- https://github.com/xauser/tmk_keyboard/tree/xauser
-
-**KMAC, 1,2 and Happy**: Custom keyboard designed by kbdmania.
-- https://github.com/ageaenes/tmk_keyboard
-
-**P60**: [DIY wired 60% keyboard](https://imgur.com/a/zwsDN) by [p3lim](https://github.com/p3lim).
-- https://github.com/p3lim/keyboard_firmware
-
-**Nerd, Kitten Paw, Lightsaber, Phantom, Lightpad, Ergodox** on [xauser](https://github.com/xauser)'s repository
-- https://github.com/xauser/tmk_keyboard/tree/xauser
-
-**ErgoDox** on [cub-unanic](https://github.com/cub-uanic)'s repository
-- https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox
-
-**Atreus** by [technomancy](https://atreus.technomancy.us)
-- https://github.com/technomancy/tmk_keyboard/tree/atreus/keyboard/atreus
-
-**[mcdox](https://github.com/DavidMcEwan/mcdox)**
-- https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox
-
-
-### converters

docs/TMK-Own-Projects.md

@@ -1,69 +0,0 @@
-## TMK own projects by hasu
-Located in [tmk_keyboard](https://github.com/tmk/tmk_keyboard/tree/master/) repository.
-
-### converter                                                                                                                                                                                          
-* [ps2_usb]         - [PS/2 keyboard to USB][GH_ps2]
-* [adb_usb]         - [ADB keyboard to USB][GH_adb]
-* [m0110_usb]       - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110]
-* [terminal_usb]    - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
-* [news_usb]        - [Sony NEWS keyboard to USB][GH_news]
-* [x68k_usb]        - [Sharp X68000 keyboard to USB][GH_x68k]
-* [sun_usb]         - [Sun] to USB(type4, 5 and 3?)
-* [pc98_usb]        - [PC98] to USB
-* [usb_usb]         - USB to USB(experimental)
-* [ascii_usb]       - ASCII(Serial console terminal) to USB
-* [ibm4704_usb]     - [IBM 4704 keyboard Converter][GH_ibm4704]
-                   
-### keyboard 
-* [hhkb]            - [Happy Hacking Keyboard pro][GH_hhkb]
-* [gh60]            - [GH60][GH60_diy] DIY 60% keyboard [prototype][GH60_proto]
-* [hbkb]            - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
-* [hid_liber]       - [HID liberation][HID_liber] controller (by alaricljs)
-* [phantom]         - [Phantom] keyboard (by Tranquilite)
-* [IIgs_Standard]   - Apple [IIGS] keyboard mod(by JeffreySung)
-* [macway]          - [Compact keyboard mod][GH_macway] [retired]
-* [KMAC]            - Korean custom keyboard
-* [Lightsaber]      - Korean custom keyboard
-             
-[ps2_usb]:              https://github.com/tmk/tmk_keyboard/tree/master/converter/ps2_usb/
-[adb_usb]:              https://github.com/tmk/tmk_keyboard/tree/master/converter/adb_usb/
-[m0110_usb]:            https://github.com/tmk/tmk_keyboard/tree/master/converter/m0110_usb
-[terminal_usb]:         https://github.com/tmk/tmk_keyboard/tree/master/converter/terminal_usb/
-[news_usb]:             https://github.com/tmk/tmk_keyboard/tree/master/converter/news_usb/
-[x68k_usb]:             https://github.com/tmk/tmk_keyboard/tree/master/converter/x68k_usb/
-[sun_usb]:              https://github.com/tmk/tmk_keyboard/tree/master/converter/sun_usb/
-[pc98_usb]:             https://github.com/tmk/tmk_keyboard/tree/master/converter/pc98_usb/
-[usb_usb]:              https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb/
-[ascii_usb]:            https://github.com/tmk/tmk_keyboard/tree/master/converter/ascii_usb/
-[ibm4704_usb]:          https://github.com/tmk/tmk_keyboard/tree/master/converter/ibm4704_usb
-[hhkb]:                 https://github.com/tmk/tmk_keyboard/tree/master/keyboard/hhkb/
-[gh60]:                 https://github.com/tmk/tmk_keyboard/tree/master/keyboard/gh60/
-[hbkb]:                 https://github.com/tmk/tmk_keyboard/tree/master/keyboard/hbkb/
-[hid_liber]:            https://github.com/tmk/tmk_keyboard/tree/master/keyboard/hid_liber/
-[phantom]:              https://github.com/tmk/tmk_keyboard/tree/master/keyboard/phantom/
-[IIgs_Standard]:        https://github.com/tmk/tmk_keyboard/tree/master/keyboard/IIgs/
-[macway]:               https://github.com/tmk/tmk_keyboard/tree/master/keyboard/macway/
-[KMAC]:                 https://github.com/tmk/tmk_keyboard/tree/master/keyboard/kmac/
-[Lightsaber]:           https://github.com/tmk/tmk_keyboard/tree/master/keyboard/lightsaber/
-             
-[GH_macway]:    http://geekhack.org/showwiki.php?title=Island:11930
-[GH_hhkb]:      http://geekhack.org/showwiki.php?title=Island:12047
-[GH_ps2]:       http://geekhack.org/showwiki.php?title=Island:14618
-[GH_adb]:       http://geekhack.org/showwiki.php?title=Island:14290
-[GH_hhkb_bt]:   http://geekhack.org/showwiki.php?title=Island:20851
-[GH_m0110]:     http://geekhack.org/showwiki.php?title=Island:24965
-[GH_news]:      http://geekhack.org/showwiki.php?title=Island:25759
-[GH_terminal]:  http://geekhack.org/showwiki.php?title=Island:27272
-[GH_x68k]:      http://geekhack.org/showwiki.php?title=Island:29060
-[GH_hbkb]:      http://geekhack.org/showwiki.php?title=Island:29483
-[GH_ibm4704]:   http://geekhack.org/index.php?topic=54706.0
-[HID_liber]:    http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
-[Phantom]:      http://geekhack.org/index.php?topic=26742
-[GH60_diy]:     http://geekhack.org/index.php?topic=34959
-[GH60_proto]:   http://geekhack.org/index.php?topic=37570.0
-[PC98]:         http://en.wikipedia.org/wiki/NEC_PC-9801
-[Sun]:          http://en.wikipedia.org/wiki/Sun-3
-[IIGS]:         http://en.wikipedia.org/wiki/Apple_IIGS
-
-
-See other [[TMK Based Projects]]

docs/TMK_README.md

@@ -1,243 +0,0 @@
-# TMK Documenation
-
-Features
---------
-These features can be used in your keyboard.
-
-* Multi-layer Keymap  - Multiple keyboard layouts with layer switching
-* Mouse key           - Mouse control with keyboard
-* System Control Key  - Power Down, Sleep, Wake Up and USB Remote Wake up
-* Media Control Key   - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc
-* USB NKRO            - 120 keys(+ 8 modifiers) simultaneously
-* PS/2 mouse support  - PS/2 mouse(TrackPoint) as composite device
-* Keyboard protocols  - PS/2, ADB, M0110, Sun and other old keyboard protocols
-* User Function       - Customizable function of key with writing code
-* Macro               - Very primitive at this time
-* Keyboard Tricks     - Oneshot modifier and modifier with tapping feature
-* Debug Console       - Messages for debug and interaction with firmware
-* Virtual DIP Switch  - Configurations stored EEPROM(Boot Magic)
-* Locking CapsLock    - Mechanical switch support for CapsLock
-* Breathing Sleep LED - Sleep indicator with charm during USB suspend
-* Backlight           - Control backlight levels
-
-
-
-Projects
---------
-You can find some keyboard specific projects under `converter` and `keyboard` directory.
-
-## Main projects
-
-### OLKB products
-* [planck](keyboards/planck/)                - [Planck] Ortholinear 40% keyboard
-* [preonic](keyboards/preonic/)              - [Preonic] Ortholinear 50% keyboard
-* [atomic](keyboards/atomic/)                - [Atomic] Ortholinear 60% keyboard
-
-### Ergodox EZ
-* [ergodox_ez](keyboards/ergodox/ez)         - [Ergodox_EZ] Assembled split keyboard
-
-## Other projects
-
-### converter
-* [ps2_usb](converter/ps2_usb/)             - [PS/2 keyboard to USB][GH_ps2]
-* [adb_usb](converter/adb_usb/)             - [ADB keyboard to USB][GH_adb]
-* [m0110_usb](converter/m0110_usb)          - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110]
-* [terminal_usb](converter/terminal_usb/)   - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
-* [news_usb](converter/news_usb/)           - [Sony NEWS keyboard to USB][GH_news]
-* [x68k_usb](converter/x68k_usb/)           - [Sharp X68000 keyboard to USB][GH_x68k]
-* [sun_usb](converter/sun_usb/)             - [Sun] to USB(type4, 5 and 3?)
-* [pc98_usb](converter/pc98_usb/)           - [PC98] to USB
-* [usb_usb](converter/usb_usb/)             - USB to USB(experimental)
-* [ascii_usb](converter/ascii_usb/)         - ASCII(Serial console terminal) to USB
-* [ibm4704_usb](converter/ibm4704_usb)      - [IBM 4704 keyboard Converter][GH_ibm4704]
-
-### keyboard
-* [hhkb](keyboards/hhkb/)                    - [Happy Hacking Keyboard pro][GH_hhkb] hasu's main board
-* [gh60](keyboards/gh60/)                    - [GH60] DIY 60% keyboard [prototype][GH60_proto] hasu's second board
-* [hbkb](keyboards/hbkb/)                    - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
-* [hid_liber](keyboards/hid_liber/)          - [HID liberation][HID_liber] controller (by alaricljs)
-* [phantom](keyboards/phantom/)              - [Phantom] keyboard (by Tranquilite)
-* [IIgs_Standard](keyboards/IIgs/)           - Apple [IIGS] keyboard mod(by JeffreySung)
-* [macway](keyboards/macway/)                - [Compact keyboard mod][GH_macway] [retired]
-* [KMAC](keyboards/kmac/)                    - Korean custom keyboard
-* [Lightsaber](keyboards/lightsaber/)        - Korean custom keyboard
-* [Infinity](keyboards/infinity/)            - Massdrop [Infinity keyboard][Infinity]
-* [NerD](keyboards/nerd/)                    - Korean custom keyboard
-* [KittenPaw](keyboards/kitten_paw)          - Custom Majestouch controller
-* [Lightpad](keyboards/lightpad)             - Korean custom keypad
-* [ghost_squid](keyboards/ghost_squid/)      - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt]
-
-### Extenal projects using tmk_keyboard
-* [ErgoDox_cub-uanic][cub-uanic]            - Split Ergonomic Keyboard [ErgoDox][ergodox_org]
-* [mcdox][mcdox_tmk]                        - [mcdox][mcdox]
-
-
-[GH_macway]:    http://geekhack.org/showwiki.php?title=Island:11930
-[GH_hhkb]:      http://geekhack.org/showwiki.php?title=Island:12047
-[GH_ps2]:       http://geekhack.org/showwiki.php?title=Island:14618
-[GH_adb]:       http://geekhack.org/showwiki.php?title=Island:14290
-[GH_hhkb_bt]:   http://geekhack.org/showwiki.php?title=Island:20851
-[GH_m0110]:     http://geekhack.org/showwiki.php?title=Island:24965
-[GH_news]:      http://geekhack.org/showwiki.php?title=Island:25759
-[GH_terminal]:  http://geekhack.org/showwiki.php?title=Island:27272
-[GH_x68k]:      http://geekhack.org/showwiki.php?title=Island:29060
-[GH_hbkb]:      http://geekhack.org/showwiki.php?title=Island:29483
-[GH_ibm4704]:   http://geekhack.org/index.php?topic=54706.0
-[HID_liber]:    http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
-[Phantom]:      http://geekhack.org/index.php?topic=26742
-[GH60]:         http://geekhack.org/index.php?topic=34959
-[GH60_proto]:   http://geekhack.org/index.php?topic=37570.0
-[PC98]:         http://en.wikipedia.org/wiki/NEC_PC-9801
-[Sun]:          http://en.wikipedia.org/wiki/Sun-3
-[IIGS]:         http://en.wikipedia.org/wiki/Apple_IIGS
-[Infinity]:     https://www.massdrop.com/buy/infinity-keyboard-kit
-[ghost_squid]:  http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid
-[cmxt]:         http://gaming.coolermaster.com/en/products/keyboard/quickfirext/
-[ergodox_org]:  http://ergodox.org/
-[cub-uanic]:    https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox
-[mcdox]:        https://github.com/DavidMcEwan/mcdox
-[mcdox_tmk]:    https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox
-[Planck]:       http://olkb.co/planck
-[Preonic]:      http://olkb.co/preonic
-[Atomic]:       http://olkb.co/atomic
-[Ergodox_EZ]:   https://www.indiegogo.com/projects/ergodox-ez-an-incredible-mechanical-keyboard
-
-
-License
--------
-**GPLv2** or later. Some protocol files are under **Modified BSD License**.
-
-Third party libraries like LUFA, PJRC and V-USB have their own license respectively.
-
-
-
-Build Firmware and Program Controller
--------------------------------------
-See [build environment setup](/readme.md#build-environment-setup), or the readme in the particular keyboards/* folder.
-
-
-
-Change your keymap
-------------------
-See [doc/keymap.md](tmk_core/doc/keymap.md).
-
-
-
-Magic Commands
---------------
-To see help press `Magic` + `H`.
-
-`Magic` key combination is `LShift` + `RShift` in many project, but `Power` key on ADB converter. 
-`Magic` keybind can be vary on each project, check `config.h` in project directory.
-
-Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
-
-    ----- Command Help -----
-    c:      enter console mode
-    d:      toggle debug enable
-    x:      toggle matrix debug
-    k:      toggle keyboard debug
-    m:      toggle mouse debug
-    v:      print device version & info
-    t:      print timer count
-    s:      print status
-    e:	    print eeprom config
-    n:	    toggle NKRO
-    0/F10:  switch to Layer0
-    1/F1:   switch to Layer1
-    2/F2:   switch to Layer2
-    3/F3:   switch to Layer3
-    4/F4:   switch to Layer4
-    PScr:   power down/remote wake-up
-    Caps:   Lock Keyboard(Child Proof)
-    Paus:   jump to bootloader
-
-
-
-Boot Magic Configuration - Virtual DIP Switch
----------------------------------------------
-Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable.
-Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
-
-To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [tmk_core/common/bootmagic.h](tmk_core/common/bootmagic.h).
-
-#### General
-- Skip reading EEPROM to start with default configuration(`ESC`)
-- Clear configuration stored in EEPROM to reset configuration(`Backspace`)
-
-#### Bootloader
-- Kick up Bootloader(`B`)
-
-#### Debug
-- Debug enable(`D`)
-- Debug matrix enable(`D`+`X`)
-- Debug keyboard enable(`D`+`K`)
-- Debug mouse enable(`D`+`M`)
-
-#### Keymap
-- Swap Control and CapsLock(`Left Control`)
-- Change CapsLock to Control(`Caps Lock`)
-- Swap LeftAlt and Gui(`Left Alt`)
-- Swap RightAlt and Gui(`Right Alt`)
-- Disable Gui(`Left Gui`)
-- Swap Grave and Escape(`Grave`)
-- Swap BackSlash and BackSpace(`Back Slash`)
-- Enable NKRO on boot(`N`)
-
-#### Default Layer
-- Set Default Layer to 0(`0`)
-- Set Default Layer to 1(`1`)
-- Set Default Layer to 2(`2`)
-- Set Default Layer to 3(`3`)
-- Set Default Layer to 4(`4`)
-- Set Default Layer to 5(`5`)
-- Set Default Layer to 6(`6`)
-- Set Default Layer to 7(`7`)
-
-
-
-Mechanical Locking support
---------------------------
-This feature makes it possible for you to use mechanical locking switch for `CapsLock`, `NumLock` 
-or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LN
-UM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Res
-ync option tries to keep switch state consistent with keyboard LED state.
- 
-    #define LOCKING_SUPPORT_ENABLE
-    #define LOCKING_RESYNC_ENABLE
-
-
-
-Start Your Own Project
------------------------
-**TBD**
-
-
-
-Debugging
---------
-Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack.
-
-You can use xprintf() to display debug info on `hid_listen`, see `tmk_core/common/xprintf.h`.
-
-
-
-Files and Directories
--------------------
-### Top
-* tmk_core/     - core library
-* keyboards/     - keyboard projects
-* converter/    - protocol converter projects
-* doc/          - documents
-
-
-
-Coding Style
--------------
-- Doesn't use Tab to indent, use 4-spaces instead.
-
-
-
-Other Keyboard Firmware Projects
-------------------
-You can learn a lot about keyboard firmware from these. See [doc/other_projects.md](tmk_core/doc/other_projects.md).

docs/Tap-Dance.md

@@ -1,144 +0,0 @@
-# Tap Dance: A single key can do 3, 5, or 100 different things
-
-Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. It's one of the nicest community-contributed features in the firmware, conceived and created by [algernon](https://github.com/algernon) in [#451](https://github.com/qmk/qmk_firmware/pull/451). Here's how algernon describes the feature:
-
-With this feature one can specify keys that behave differently, based on the amount of times they have been tapped, and when interrupted, they get handled before the interrupter.
-
-To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets explore a certain setup! We want one key to send `Space` on single tap, but `Enter` on double-tap.
-
-With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be send first. Thus, `SPC a` will result in `a SPC` being sent, if they are typed within `TAPPING_TERM`. With the tap dance feature, that'll come out as `SPC a`, correctly.
-
-The implementation hooks into two parts of the system, to achieve this: into `process_record_quantum()`, and the matrix scan. We need the latter to be able to time out a tap sequence even when a key is not being pressed, so `SPC` alone will time out and register after `TAPPING_TERM` time.
-
-But lets start with how to use it, first!
-
-First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array.
-
-This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are three possible options:
-
-* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held.
-* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
-* `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function on when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
-
-The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
-
-And that's the bulk of it!
-
-And now, on to the explanation of how it works!
-
-The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and the timer.
-
-This means that you have `TAPPING_TERM` time to tap the key again, you do not have to input all the taps within that timeframe. This allows for longer tap counts, with minimal impact on responsiveness.
-
-Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of tap-dance keys.
-
-For the sake of flexibility, tap-dance actions can be either a pair of keycodes, or a user function. The latter allows one to handle higher tap counts, or do extra things, like blink the LEDs, fiddle with the backlighting, and so on. This is accomplished by using an union, and some clever macros.
-
-### Examples
-
-Here's a simple example for a single definition:
-
-1. In your `makefile`, add `TAP_DANCE_ENABLE = yes`
-2. In your `config.h` (which you can copy from `qmk_firmware/keyboards/planck/config.h` to your keymap directory), add `#define TAPPING_TERM 200`
-3. In your `keymap.c` file, define the variables and definitions, then add to your keymap:
-
-```c
-//Tap Dance Declarations
-enum {
-  TD_ESC_CAPS = 0
-};
-
-//Tap Dance Definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
-  //Tap once for Esc, twice for Caps Lock
-  [TD_ESC_CAPS]  = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_CAPS)
-// Other declarations would go here, separated by commas, if you have them
-};
-
-//In Layer declaration, add tap dance item in place of a key code
-TD(TD_ESC_CAPS)
-```
-
-Here's a more complex example involving custom actions:
-
-```c
-enum {
- CT_SE = 0,
- CT_CLN,
- CT_EGG,
- CT_FLSH,
-};
-
-/* Have the above three on the keymap, TD(CT_SE), etc... */
-
-void dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) {
-  if (state->count == 1) {
-    register_code (KC_RSFT);
-    register_code (KC_SCLN);
-  } else {
-    register_code (KC_SCLN);
-  }
-}
-
-void dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) {
-  if (state->count == 1) {
-    unregister_code (KC_RSFT);
-    unregister_code (KC_SCLN);
-  } else {
-    unregister_code (KC_SCLN);
-  }
-}
-
-void dance_egg (qk_tap_dance_state_t *state, void *user_data) {
-  if (state->count >= 100) {
-    SEND_STRING ("Safety dance!");
-    reset_tap_dance (state);
-  }
-}
-
-// on each tap, light up one led, from right to left
-// on the forth tap, turn them off from right to left
-void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) {
-  switch (state->count) {
-  case 1:
-    ergodox_right_led_3_on();
-    break;
-  case 2:
-    ergodox_right_led_2_on();
-    break;
-  case 3:
-    ergodox_right_led_1_on();
-    break;
-  case 4:
-    ergodox_right_led_3_off();
-    _delay_ms(50);
-    ergodox_right_led_2_off();
-    _delay_ms(50);
-    ergodox_right_led_1_off();
-  }
-}
-
-// on the fourth tap, set the keyboard on flash state
-void dance_flsh_finished(qk_tap_dance_state_t *state, void *user_data) {
-  if (state->count >= 4) {
-    reset_keyboard();
-    reset_tap_dance(state);
-  }
-}
-
-// if the flash state didnt happen, then turn off leds, left to right
-void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) {
-  ergodox_right_led_1_off();
-  _delay_ms(50);
-  ergodox_right_led_2_off();
-  _delay_ms(50);
-  ergodox_right_led_3_off();
-}
-
-qk_tap_dance_action_t tap_dance_actions[] = {
-  [CT_SE]  = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
- ,[CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_cln_finished, dance_cln_reset)
- ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
- ,[CT_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED (dance_flsh_each, dance_flsh_finished, dance_flsh_reset)
-};
-```

docs/Test-for-ASCIIDOC.asciidoc

@@ -1,17 +0,0 @@
-
-
-
-.Makefile
-[source,Makefile]
-----
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes   # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes   # Audio control and System control(+450)
-CONSOLE_ENABLE = yes    # Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes       # USB Nkey Rollover - not yet supported in LUFA
-----

docs/USB-HID.md

@@ -1,11 +0,0 @@
-# Getting Report Descriptor
-```
-  $ cd /sys/bus/usb/drivers/usbhid
-  $ ls
-  1-1.3.4:1.0  1-1.3.4:1.2  bind    new_id     uevent
-  1-1.3.4:1.1  1-1.3.4:1.3  module  remove_id  unbind
-  $ echo -n 1-1.4\:1.0 | sudo tee unbind
-  $ sudo lsusb -vvv -d 046d:c01d
-  $ echo -n 1-1.4\:1.0 | sudo tee bind
-```
-

docs/Unicode-and-additional-language-support.md

@@ -1,54 +0,0 @@
-## Unicode support
-
-There are three Unicode keymap definition method available in QMK:
-
-### UNICODE_ENABLE
-
-Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in
-keymap file, where *n* is a 4 digit hexadecimal.
-
-### UNICODEMAP_ENABLE
-
-Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping
-table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file.
-The keycode function is `X(n)` where *n* is the array index of the mapping
-table.
-
-### UCIS_ENABLE
-
-TBD
-
-Unicode input in QMK works by inputing a sequence of characters to the OS,
-sort of like macro. Unfortunately, each OS has different ideas on how Unicode is inputted.
-
-This is the current list of Unicode input method in QMK:
-
-* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
-* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
-* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
-* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
-
-## Additional language support
-
-In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware.
-
-## International Characters on Windows
-
-[AutoHotkey](https://autohotkey.com) allows Windows users to create custom hotkeys among others.
-
-The method does not require Unicode support in the keyboard itself but depends instead of AutoHotkey running in the background.
-
-First you need to select a modifier combination that is not in use by any of your programs.
-CtrlAltWin is not used very widely and should therefore be perfect for this.
-There is a macro defined for a mod-tab combo `LCAG_T`.
-Add this mod-tab combo to a key on your keyboard, e.g.: `LCAG_T(KC_TAB)`.
-This makes the key behave like a tab key if pressed and released immediately but changes it to the modifier if used with another key.
-
-In the default script of AutoHotkey you can define custom hotkeys.
-
-    <^<!<#a::Send, ä
-    <^<!<#<+a::Send, Ä
-
-The hotkeys above are for the combination CtrlAltGui and CtrlAltGuiShift plus the letter a.
-AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
-

docs/Unit-testing.md

@@ -1,68 +0,0 @@
-# Unit Testing
-
-If you are new to unit testing, then you can find many good resources on internet. However most of it is scattered around in small pieces here and there, and there's also many different opinions, so I won't give any recommendations.
-
-Instead I recommend these two books, explaining two different styles of Unit Testing in detail.
-
-* "Test Driven Development: By Example: Kent Beck"
-* "Growing Object-Oriented Software, Guided By Tests: Steve Freeman, Nat Pryce"
-
-If you prefer videos there are Uncle Bob's [Clean Coders Videos](https://cleancoders.com/), which unfortunately cost quite a bit, especially if you want to watch many of them. But James Shore has a free [Let's Play](http://www.jamesshore.com/Blog/Lets-Play) video series.
-
-## Google Test and Google Mock
-It's possible to Unit Test your code using [Google Test](https://github.com/google/googletest). The Google Test framework also includes another component for writing testing mocks and stubs, called "Google Mock". For information how to write the actual tests, please refer to the documentation on that site.
-
-## Use of C++
-
-Note that Google Test and therefore any test has to be written in C++, even if the rest of the QMK codebases is written in C. This should hopefully not be a problem even if you don't know any C++, since there's quite clear documentation and examples of the required C++ features, and you can write the rest of the test code almost as you would write normal C. Note that some compiler errors which you might get can look quite scary, but just read carefully what it says, and you should be ok.
-
-One thing to remember, is that you have to append `extern "C"` around all of your C file includes.
-
-## Adding tests for new or existing features
-
-If you want to unit test some feature, then take a look at the existing serial_link tests, in the `quantum/serial_link/tests folder`, and follow the steps below to create a similar structure.
-
-1. If it doesn't already exist, add a test subfolder to the folder containing the feature.
-2. Create a `testlist.mk` and a `rules.mk` file in that folder.
-3. Include those files from the root folder `testlist.mk`and `build_test.mk` respectively.
-4. Add a new name for your testgroup to the `testlist.mk` file. Each group defined there will be a separate executable. And that's how you can support mocking out different parts. Note that it's worth adding some common prefix, just like it's done for the serial_link tests. The reason for that is that the make command allows substring filtering, so this way you can easily run a subset of the tests.
-5. Define the source files and required options in the `rules.mk` file.
-   * `_SRC` for source files
-   * `_DEFS` for additional defines
-   * `_INC` for additional include folders
-6. Write the tests in a new cpp file inside the test folder you created. That file has to be one of the files included from the `rules.mk` file.
-
-Note how there's several different tests, each mocking out a separate part. Also note that each of them only compiles the very minimum that's needed for the tests. It's recommend that you try to do the same. For a relevant video check out [Matt Hargett "Advanced Unit Testing in C & C++](https://www.youtube.com/watch?v=Wmy6g-aVgZI)
-
-## Running the tests
-
-To run all the tests in the codebase, type `make test`. You can also run test matching a substring by typing `make test-matchingsubstring` Note that the tests are always compiled with the native compiler of your platform, so they are also run like any other program on your computer.
-
-## Debugging the tests
-
-If there are problems with the tests, you can find the executable in the `./build/test` folder. You should be able to run those with GDB or a similar debugger.
-
-## Full Integration tests
-
-It's not yet possible to do a full integration test, where you would compile the whole firmware and define a keymap that you are going to test. However there are plans for doing that, because writing tests that way would probably be easier, at least for people that are not used to unit testing.
-
-In that model you would emulate the input, and expect a certain output from the emulated keyboard.
-
-# Tracing variables 
-
-Sometimes you might wonder why a variable gets changed and where, and this can be quite tricky to track down without having a debugger. It's of course possible to manually add print statements to track it, but you can also enable the variable trace feature. This works for both for variables that are changed by the code, and when the variable is changed by some memory corruption.
-
-To take the feature into use add `VARIABLE_TRACE=x` to the end of you make command. `x` represents the number of variables you want to trace, which is usually 1. 
-
-Then at a suitable place in the code, call `ADD_TRACED_VARIABLE`, to begin the tracing. For example to trace all the layer changes, you can do this
-```c
-void matrix_init_user(void) {
-  ADD_TRACED_VARIABLE("layer", &layer_state, sizeof(layer_state));
-}
-```
-
-This will add a traced variable named "layer" (the name is just for your information), which tracks the memory location of `layer_state`. It tracks 4 bytes (the size of `layer_state`), so any modification to the variable will be reported. By default you can not specify a size bigger than 4, but you can change it by adding `MAX_VARIABLE_TRACE_SIZE=x` to the end of the make command line.
-
-In order to actually detect changes to the variables you should call `VERIFY_TRACED_VARIABLES` around the code that you think that modifies the variable. If a variable is modified it will tell you between which two `VERIFY_TRACED_VARIABLES` calls the modification happened. You can then add more calls to track it down further. I don't recommend spamming the codebase with calls. It's better to start with a few, and then keep adding them in a binary search fashion. You can also delete the ones you don't need, as each call need to store the file name and line number in the ROM, so you can run out of memory if you add too many calls.
-
-Also remember to delete all the tracing code once you have found the bug, as you wouldn't want to create a pull request with tracing code.

docs/VAGRANT_GUIDE.md

@@ -1,27 +0,0 @@
-# Quick Start Directions
-
-This project includes a Vagrantfile that will allow you to build a new firmware for your keyboard very easily without major changes to your primary operating system. This also ensures that when you clone the project and perform a build, you have the exact same environment as anyone else using the Vagrantfile to build. This makes it much easier for people to help you troubleshoot any issues you encounter.
-
-## Requirements
-
-Using the `/Vagrantfile` in this repository requires you have [Vagrant](http://www.vagrantup.com/) as well as [VirtualBox](https://www.virtualbox.org/) (or [VMware Workstation](https://www.vmware.com/products/workstation) and [Vagrant VMware plugin](http://www.vagrantup.com/vmware) but the (paid) VMware plugin requires a licensed copy of VMware Workstation/Fusion).
-
-*COMPATIBILITY NOTICE* Certain versions of Virtualbox 5 appear to have an incompatibility with the Virtualbox extensions installed in the boxes in this Vagrantfile. If you encounter any issues with the /vagrant mount not succeeding, please upgrade your version of Virtualbox to at least 5.0.12. **Alternately, you can try running the following command:** `vagrant plugin install vagrant-vbguest`
-
-
-Other than having Vagrant and Virtualbox installed and possibly a restart of your computer afterwards, you can simple run a 'vagrant up' anywhere inside the folder where you checked out this project and it will start a Linux virtual machine that contains all the tools required to build this project. There is a post Vagrant startup hint that will get you off on the right foot, otherwise you can also reference the build documentation below.
-
-Build Firmware and Program Controller
--------------------------------------
-See [/doc/BUIDE_GUIDE.md](/doc/BUILD_GUIDE.md), or the readme in the particular keyboards/* folder.
-
-Change your keymap
-------------------
-See [/doc/keymap.md](/doc/keymap.md).
-
-## Flashing the firmware
-
-The "easy" way to flash the firmware is using a tool from your host OS like the Teensy programming app. [ErgoDox EZ](/keyboards/ergodox/readme.md) gives a great example.
-
-If you want to program via the command line you can uncomment the ['modifyvm'] lines in the Vagrantfile to enable the USB passthrough into Linux and then program using the command line tools like dfu-util/dfu-programmer or you can install the Teensy CLI version.
-	

docs/_Sidebar.md

@@ -1,21 +0,0 @@
-* [Wiki Home](/qmk/qmk_firmware/wiki)
-* Getting started
-  * [QMK Overview](QMK-Overview)
-  * [Build Environment Setup](Build-Environment-Setup)
-* [Overview for keymap creators](Keymap)
- * [Keycodes](Keycodes)
- * [Layer switching](Key-Functions)
- * [Leader Key](Leader-Key)
- * [Macros](Macros)
- * [Space Cadet](Space-Cadet-Shift)
- * [Tap Dance](Tap-Dance)
- * [Mouse keys](Mouse-keys)
- * [FAQ: Creating a Keymap](FAQ-Keymap)
- * [FAQ: Compiling QMK](FAQ-Build)
-* For hardware makers and modders
-  * [Modding your keyboard](Modding-your-keyboard)
-  * [Porting your keyboard to QMK](Porting-your-keyboard-to-QMK)
-  * [Adding features to QMK](Adding-features-to-QMK)
-* [General FAQ](FAQ)
-
-

docs/_summary.md

@@ -0,0 +1,79 @@
+* [Getting started](README.md)
+  * [QMK Introduction](getting_started_introduction.md)
+  * [Install Build Tools](getting_started_build_tools.md)
+    * Alternative: [Vagrant Guide](getting_started_vagrant_guide.md)
+  * [Build/Compile instructions](getting_started_make_guide.md)
+  * [Flashing instructions](flashing.md)
+  * [Contributing to QMK](contributing.md)
+  * [How to Use Github](getting_started_github.md)
+
+* [FAQ](faq.md)
+  * [General FAQ](faq_general.md)
+  * [Build/Compile QMK](faq_build.md)
+  * [Debugging/Troubleshooting QMK](faq_debug.md)
+  * [Keymap](faq_keymap.md)
+
+* [Hardware](hardware.md)
+  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
+  * [AVR Processors](hardware_avr.md)
+  * ARM Processors (TBD)
+  * [Drivers](hardware_drivers.md)
+
+* [Features](features.md)
+  * [Advanced Keycodes](feature_advanced_keycodes.md)
+  * [Audio](feature_audio.md)
+  * [Auto Shift](feature_auto_shift.md)
+  * [Backlight](feature_backlight.md)
+  * [Bootmagic](feature_bootmagic.md)
+  * [Dynamic Macros](feature_dynamic_macros.md)
+  * [Key Lock](feature_key_lock.md)
+  * [Layouts](feature_layouts.md)
+  * [Leader Key](feature_leader_key.md)
+  * [Macros](feature_macros.md)
+  * [Mouse keys](feature_mouse_keys.md)
+  * [Pointing Device](feature_pointing_device.md)
+  * [PS2 Mouse](feature_ps2_mouse.md)
+  * [RGB Lighting](feature_rgblight.md)
+  * [Space Cadet](feature_space_cadet.md)
+  * [Stenography](feature_stenography.md)
+  * [Tap Dance](feature_tap_dance.md)
+  * [Terminal](feature_terminal.md)
+  * [Thermal Printer](feature_thermal_printer.md)
+  * [Unicode](feature_unicode.md)
+  * [Userspace](feature_userspace.md)
+
+* Reference
+  * [Config Options](config_options.md)
+  * [Customizing Functionality](custom_quantum_functions.md)
+  * [Documentation Best Practices](documentation_best_practices.md)
+  * [Documentation Templates](documentation_templates.md)
+  * [Glossary](glossary.md)
+  * [Keymap overview](keymap.md)
+  * [Keycodes](keycodes.md)
+    * [Backlight](feature_backlight.md#backlight-keycodes)
+    * [Basic](keycodes_basic.md)
+    * [Bluetooth](feature_bluetooth.md#bluetooth-keycodes)
+    * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
+    * [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
+    * [Mod+Key](feature_advanced_keycodes.md#modifier-keys)
+    * [Mod Tap](feature_advanced_keycodes.md#mod-tap)
+    * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
+    * [Quantum](quantum_keycodes.md)
+    * [RGB Light](feature_rgblight.md#rgblight-keycodes)
+    * [Shifted Keys](feature_advanced_keycodes.md#shifted-keycodes)
+    * [Stenography](feature_stenography.md#keycode-reference)
+    * [Thermal Printer](feature_thermal_printer.md#thermal-printer-keycodes)
+    * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
+  * [Unit Testing](unit_testing.md)
+
+* For Makers and Modders
+  * [Hand Wiring Guide](hand_wire.md)
+  * [ISP flashing guide](isp_flashing_guide.md)
+  * [Modding your keyboard](modding_your_keyboard.md)
+
+* For a Deeper Understanding
+  * [How Keyboards Work](how_keyboards_work.md)
+  * [Understanding QMK](understanding_qmk.md)
+
+* Other Topics
+  * [Using Eclipse with QMK](eclipse.md)

docs/basic_how_keyboards_work.md

@@ -1,96 +0,0 @@
-# How keys are registered, and interpreted by computers
-
-In this file, you can will learn the concepts of how keyboards work over USB,
-and you'll be able to better understand what you can expect from changing your
-firmware directly.
-
-## Schematic view
-
-Whenever you type on 1 particular key, here is the chain of actions taking
-place:
-
-``` text
-+------+         +-----+       +----------+      +----------+     +----+
-| User |-------->| Key |------>| Firmware |----->| USB wire |---->| OS |
-+------+         +-----+       +----------+      +----------+     |----+
-```
-
-This scheme is a very simple view of what's going on, and more details follow
-in the next sections.
-
-## 1. You Press a Key
-
-Whenever you press a key, the firmware of your keyboard can register this event.
-It can register when the key is pressed, held and released.
-
-This usually happens with a [periodic scan of key presses with a frequency around 100 hz](https://github.com/benblazak/ergodox-firmware/blob/master/references.md#typical-keyboard-information).
-This speed often is limited by the mechanical key response time, the protocol
-to transfer those key presses (here USB HID), and by the software it is used in.
-
-## 2. What the Firmware Sends
-
-The [HID specification](http://www.usb.org/developers/hidpage/Hut1_12v2.pdf)
-tells what a keyboard can actually send through USB to have a chance to be
-properly recognised. This includes a pre-defined list of keycodes which are
-simple numbers from `0x00` to `0xE7`. The firmware assigns a keycode to each
-key of the keyboard.
-
-The firmware does not send actually letters or characters, but only keycodes.
-Thus, by modifying the firmware, you only can modify what keycode is sent over
-USB for a given key.
-
-## 3. What the Operating System Does
-
-Once the keycode reaches the operating system, a piece of software has to have
-it match an actual character thanks to a keyboard layout. For example, if your
-layout is set to QWERTY, a sample of the matching table is as follow:
-
-``` text
-| keycode | character |
-|---------+-----------|
-|    0x04 | a/A       |
-|    0x05 | b/B       |
-|    0x06 | c/C       |
-|     ... | ...       |
-|    0x1C | y/Y       |
-|    0x1D | z/Z       |
-|     ... | ...       |
-|---------+-----------|
-```
-
-## Back to the firmware
-
-As the layout is generally fixed (unless you create your own), the firmware can
-actually call a keycode by its layout name directly to ease things for you.
-
-This is exactly what is done here with `KC_A` actually representing `0x04` in
-QWERTY. The full list can be found in `keycode.txt`.
-
-## List of Characters You Can Send
-
-Putting aside shortcuts, having a limited set of keycodes mapped to a limited
-layout means that **the list of characters you can assign to a given key only
-is the ones present in the layout**.
-
-For example, this means that if you have a QWERTY US layout, and you want to
-assign 1 key to produce `€` (euro currency symbol), you are unable to do so,
-because the QWERTY US layout does not have such mapping. You could fix that by
-using a QWERTY UK layout, or a QWERTY US International.
-
-You may wonder why a keyboard layout containing all of Unicode is not devised
-then? The limited number of keycode available through USB simply disallow such
-a thing.
-
-## How to (Maybe) Enter Unicode Characters
-
-You can have the firmware send *sequences of keys* to use the [software Unicode
-Input
-Method](https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input) of
-the target operating system, thus effectively entering characters independently
-of the layout defined in the OS.
-
-Yet, it does come with multiple disadvantages:
-
- - Tied to a specific OS a a time (need recompilation when changing OS);
- - Within a given OS, does not work in all software;
- - Limited to a subset of Unicode on some systems.

docs/build_old.md

@@ -1,187 +0,0 @@
-Build Firmware and Program Controller
-=====================================
-
-## This guide may be out-dated - use doc/BUILD_GUIDE.md instead
-
-Download and Install
---------------------
-### 1. Install Tools
-
-1. **Toolchain** On Windows install [MHV AVR Tools][mhv] for AVR GCC compiler and [Cygwin][cygwin](or [MinGW][mingw]) for shell terminal. On Mac you can use [CrossPack][crosspack]. On Linux you can install AVR GCC (and avr-libc) with your favorite package manager or run the avr_setup.sh script in the root of this repository.
-
-2. **Programmer** On Windows install [Atmel FLIP][flip]. On Mac and Linux install [dfu-programmer][dfu-prog].
-
-3. **Driver** On Windows you start DFU bootloader on the chip first time you will see 'Found New Hardware Wizard' to install driver. If you install device driver properly you can find chip name like 'ATmega32U4' under 'LibUSB-Win32 Devices' tree on 'Device Manager'. If not you shall need to update its driver on 'Device Manager'. You will find the driver in `FLIP` install directory like: C:\Program Files (x86)\Atmel\Flip 3.4.5\usb\. In case of `dfu-programmer` use its driver.
-
-If you use PJRC Teensy you don't need step 2 and 3 above, just get [Teensy loader][teensy-loader].
-
-
-### 2. Download source
-You can find firmware source at github:
-
-- <https://github.com/tmk/tmk_keyboard>
-
-If you are familiar with `Git` tools you are recommended to use it but you can also download zip archive from:
-
-- <https://github.com/tmk/tmk_keyboard/archive/master.zip>
-
-
-Build firmware
---------------
-### 1. Open terminal
-Open terminal window to get access to commands. Use Cygwin(or MingGW) `shell terminal` in Windows or `Terminal.app` on Mac OSX. In Windows press `Windows` key and `R` then enter `cmd` in 'Run command' dialog showing up.
-
-### 2. Change directory
-Move to project directory in the firmware source.
-
-    cd tmk_keyboard/{'keyboard' or 'converter'}/<project>
-
-### 3. Make
-Build firmware using GNU `make` command. You'll see `<project>_<variant>.hex` file in that directory unless something unexpected occurs in build process.
-
-
-    make -f Makefile.<variant> clean
-    make -f Makefile.<variant>
-
-
-
-
-Program Controller
-------------------
-Now you have **hex** file to program on current directory. This **hex** is only needed to program your controller, other files are used for development and you may leave and forget them.
-
-### 1. Start bootloader
-How to program controller depends on controller chip and its board design. To program AVR USB chips you'll need to start it up in bootloader mode. Most of boards with the chip have a push button to let bootloader come up. Consult with your controller board manual.
-
-### 2. Program with DFU bootloader
-Stock AVR USB chip including ATmega32U4 has DFU bootloader by factory default. `FLIP` is a DFU programmer on Windows offered by Atmel. Open source command line tool `dfu-programmer` also supports AVR chips, it runs on Linux, Mac OSX and even Windows.
-
-To program AVR chip with DFU bootloader use `FLIP` or `dfu-programmer`.
-If you have a proper program command in `Makefile` just type this.
-
-`FLIP` has two version of tool, GUI app and command line program. If you want GUI see tutorial below.
-To use command line tool run this command. Note that you need to set PATH variable properly.
-
-    $ make -f Makefile.<variant> flip
-
-Or to program with `dfu-programmer` run:
-
-    $ make -f Makefile.<variant> dfu
-
-#### FLIP GUI tutorial
-1. On menu bar click Device -> Select, then. `ATmega32u4`.
-2. On menu bar click Settings -> Communication -> USB, then click 'Open' button on 'USB Port Connection' dialog.
-At this point you'll see grey-outed widgets on the app get colored and ready.
-
-3. On menu bar click File -> Load HEX File, then select your firmware hex file on File Selector dialog.
-4. On 'Operations Flow' panel click 'Run' button to load the firmware binary to the chip. Note that you should keep 'Erase', 'Blank Check', 'Program' and 'Verify' check boxes selected.
-5. Re-plug USB cord or click 'Start Application' button to restart your controller.
-Done.
-
-See also these instructions if you need.
-
-- <http://code.google.com/p/micropendous/wiki/LoadingFirmwareWithFLIP>
-- <http://www.atmel.com/Images/doc7769.pdf>
-
-
-### 3. Program with Teensy Loader
-If you have PJRC Teensy see instruction of `Teensy Loader`.
-
-- <http://www.pjrc.com/teensy/loader.html>
-
-Or use this command if you have command line version of Teensy Loader installed.
-
-    $ make -f Makefile.<variant> teensy
-
-
-### 4. Program with Other programmer
-You may want to use other programmer like `avrdude` with AVRISPmkII, Arduino or USBasp. In that case you can still use make target `program` for build with configuring `PROGRAM_CMD` in Makefile.
-
-    $ make -f Makefile.<variant> program
-
-
-[cygwin]:       https://www.cygwin.com/
-[mingw]:        http://www.mingw.org/
-[mhv]:          https://infernoembedded.com/products/avr-tools
-[winavr]:       http://winavr.sourceforge.net/
-[crosspack]:    http://www.obdev.at/products/crosspack/index.html
-[flip]:         http://www.atmel.com/tools/FLIP.aspx
-[dfu-prog]:     http://dfu-programmer.sourceforge.net/
-[teensy-loader]:http://www.pjrc.com/teensy/loader.html
-
-
-
-Makefile Options
-----------------
-### 1. MCU and Frequency.
-
-    MCU = atmega32u4       # Teensy 2.0
-    #MCU = at90usb1286      # Teensy++ 2.0
-    F_CPU = 16000000
-
-Set your MCU and its clock in Hz.
-
-    # Boot Section Size in *bytes*
-    #   Teensy halfKay   512
-    #   Atmel DFU loader 4096
-    #   LUFA bootloader  4096
-    OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-If you are using PJRC Teensy use `512` for `BOOTLOADER_SIZE`, otherwise use `4096` unless you are sure.
-
-### 2. Features
-Optional. Note that ***comment out*** with `#` to disable them.
-
-    BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-    MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-    EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-    CONSOLE_ENABLE = yes        # Console for debug(+400)
-    COMMAND_ENABLE = yes        # Commands for debug and configuration
-    SLEEP_LED_ENABLE = yes      # Breathing sleep LED during USB suspend
-    #NKRO_ENABLE = yes          # USB Nkey Rollover - not yet supported in LUFA
-    #BACKLIGHT_ENABLE = yes     # Enable keyboard backlight functionality
-
-### 3. Programmer
-Optional. Set proper command for your controller, bootloader and programmer. This command can be used with `make program`. Not needed if you use `FLIP`, `dfu-programmer` or `Teensy Loader`.
-
-    # avrdude with AVRISPmkII
-    PROGRAM_CMD = avrdude -p $(MCU) -c avrispmkII -P USB -U flash:w:$(TARGET).hex
-
-    # avrdude with USBaspLoader
-    PROGRAM_CMD = avrdude -p $(MCU) -c usbasp -U flash:w:$(TARGET).hex
-
-    # avrdude with arduino
-    PROGRAM_CMD = avrdude -p $(MCU) -c arduino -P COM1 -b 57600 -U flash:w:$(TARGET).hex
-
-
-
-Config.h Options
-----------------
-### 1. Magic command key combination
-
-    #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
-
-### 2. Mechanical Locking Support for CapsLock
-
-    /* Mechanical locking CapsLock support. Use KC_LCAP instead of KC_CAPS in keymap */
-    #define CAPSLOCK_LOCKING_ENABLE
-    /* Locking CapsLock re-synchronize hack */
-    #define CAPSLOCK_LOCKING_RESYNC_ENABLE
-
-### 3. Disable Debug and Print
-
-    /* disable debug print */
-    #define NO_DEBUG
-
-    /* disable print */
-    #define NO_PRINT
-
-### 4. Disable Action Features
-
-    #define NO_ACTION_LAYER
-    #define NO_ACTION_TAPPING
-    #define NO_ACTION_ONESHOT
-    #define NO_ACTION_MACRO
-    #define NO_ACTION_FUNCTION
-
-***TBD***

docs/config_options.md

@@ -0,0 +1,200 @@
+# Configuring QMK
+
+QMK is nearly infinitely configurable. Wherever possible we err on the side of allowing users to customize their keyboard, even at the expense of code size. That level of flexibility makes for a daunting configuration experience, however.
+
+There are two main types of configuration files in QMK- `config.h` and `rules.mk`. These files exist at various levels in QMK and all files of the same type are combined to build the final configuration. The levels, from lowest priority to highest priority, are:
+
+* QMK Default
+* Keyboard
+* Folders (Up to 5 levels deep)
+* Keymap
+
+## QMK Default
+
+Every available setting in QMK has a default. If that setting is not set at the Keyboard, Folder, or Keymap level this is the setting that will be used.
+
+## Keyboard
+
+This level contains config options that should apply to the whole keyboard. Some settings won't change in revisions, or most keymaps. Other settings are merely defaults for this keyboard and can be overridden by folders and/or keymaps.
+
+## Folders
+
+Some keyboards have folders and sub-folders to allow for different hardware configurations. Most keyboards only go 1 folder deep, but QMK supports structures up to 5 folders deep. Each folder can have its own `config.h` and `rules.mk` files that are incorporated into the final configuration.
+
+## Keymap
+
+This level contains all of the options for that particular keymap. If you wish to override a previous declaration, you can use `#undef <variable>` to undefine it, where you can then redefine it without an error.
+
+# The `config.h` file
+
+This is a C header file that is one of the first things included, and will persist over the whole project (if included). Lots of variables can be set here and accessed elsewhere.
+
+## `config.h` Options
+
+### Hardware Options
+* `#define VENDOR_ID 0x1234`
+  * defines your VID, and for most DIY projects, can be whatever you want
+* `#define PRODUCT_ID 0x5678`
+  * defines your PID, and for most DIY projects, can be whatever you want
+* `#define DEVICE_VER 0`
+  * defines the device version (often used for revisions)
+* `#define MANUFACTURER Me`
+  * generally who/whatever brand produced the board
+* `#define PRODUCT Board`
+  * the name of the keyboard
+* `#define DESCRIPTION a keyboard`
+  * a short description of what the keyboard is
+* `#define MATRIX_ROWS 5`
+  * the number of rows in your keyboard's matrix
+* `#define MATRIX_COLS 15`
+  * the number of columns in your keyboard's matrix
+* `#define MATRIX_ROW_PINS { D0, D5, B5, B6 }`
+  * pins of the rows, from top to bottom
+* `#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }`
+  * pins of the columns, from left to right
+* `#define UNUSED_PINS { D1, D2, D3, B1, B2, B3 }`
+  * pins unused by the keyboard for reference
+* `#define MATRIX_HAS_GHOST`
+  * define is matrix has ghost (unlikely)
+* `#define DIODE_DIRECTION COL2ROW`
+  * COL2ROW or ROW2COL - how your matrix is configured. COL2ROW means the black mark on your diode is facing to the rows, and between the switch and the rows.
+* `#define AUDIO_VOICES`
+  * turns on the alternate audio voices (to cycle through)
+* `#define C6_AUDIO`
+  * enables audio on pin C6
+* `#define B5_AUDIO`
+  * enables audio on pin B5 (duophony is enable if both are enabled)
+* `#define BACKLIGHT_PIN B7`
+  * pin of the backlight - B5, B6, B7 use PWM, others use softPWM
+* `#define BACKLIGHT_LEVELS 3`
+  * number of levels your backlight will have (not including off)
+* `#define DEBOUNCING_DELAY 5`
+  * the delay when reading the value of the pin (5 is default)
+* `#define LOCKING_SUPPORT_ENABLE`
+  * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
+* `#define LOCKING_RESYNC_ENABLE`
+  * tries to keep switch state consistent with keyboard LED state
+* `#define IS_COMMAND() ( keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) )`
+  * key combination that allows the use of magic commands (useful for debugging)
+
+### Features That Can Be Disabled
+
+If you define these options you will disable the associated feature, which can save on code size.
+
+* `#define NO_DEBUG`
+  * disable debuging
+* `#define NO_PRINT`
+  * disable printing/debugging using hid_listen
+* `#define NO_ACTION_LAYER`
+  * disable layers
+* `#define NO_ACTION_TAPPING`
+  * disable tap dance and other tapping features
+* `#define NO_ACTION_ONESHOT`
+  * disable one-shot modifiers
+* `#define NO_ACTION_MACRO`
+  * disable all macro handling
+* `#define NO_ACTION_FUNCTION`
+  * disable the action function (deprecated)
+
+### Features That Can Be Enabled
+
+If you define these options you will enable the associated feature, which may increase your code size.
+
+* `#define FORCE_NKRO`
+  * NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of eeprom setting. NKRO can still be turned off but will be turned on again if the keyboard reboots.
+* `#define PREVENT_STUCK_MODIFIERS`
+  * when switching layers, this will release all mods
+
+### Behaviors That Can Be Configured
+
+* `#define TAPPING_TERM 200`
+  * how long before a tap becomes a hold
+* `#define RETRO_TAPPING`
+  * tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release
+* `#define TAPPING_TOGGLE 2`
+  * how many taps before triggering the toggle
+* `#define PERMISSIVE_HOLD`
+  * makes tap and hold keys work better for fast typers who don't want tapping term set above 500
+* `#define LEADER_TIMEOUT 300`
+  * how long before the leader key times out
+* `#define ONESHOT_TIMEOUT 300`
+  * how long before oneshot times out
+* `#define ONESHOT_TAP_TOGGLE 2`
+  * how many taps before oneshot toggle is triggered
+* `#define IGNORE_MOD_TAP_INTERRUPT`
+  * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold
+
+### RGB Light Configuration
+
+* `#define RGB_DI_PIN D7`
+  * pin the DI on the ws2812 is hooked-up to
+* `#define RGBLIGHT_ANIMATIONS`
+  * run RGB animations
+* `#define RGBLED_NUM 15`
+  * number of LEDs
+* `#define RGBLIGHT_HUE_STEP 12`
+  * units to step when in/decreasing hue
+* `#define RGBLIGHT_SAT_STEP 25`
+  * units to step when in/decresing saturation
+* `#define RGBLIGHT_VAL_STEP 12`
+  * units to step when in/decreasing value (brightness)
+* `#define RGBW_BB_TWI`
+  * bit-bangs twi to EZ RGBW LEDs (only required for Ergodox EZ)
+
+### Mouse Key Options
+
+* `#define MOUSEKEY_INTERVAL 20`
+* `#define MOUSEKEY_DELAY 0`
+* `#define MOUSEKEY_TIME_TO_MAX 60`
+* `#define MOUSEKEY_MAX_SPEED 7`
+* `#define MOUSEKEY_WHEEL_DELAY 0`
+
+# The `rules.mk` File
+
+This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.
+
+## `rules.mk` options
+
+### Build Options
+
+* `DEFAULT_FOLDER`
+  * Used to specify a default folder when a keyboard has more than one sub-folder.
+* `SRC`
+  * Used to add files to the compilation/linking list.
+* `LAYOUTS`
+  * A list of [layouts](feature_layouts.md) this keyboard supports.
+
+### AVR MCU Options
+* `MCU = atmega32u4`
+* `F_CPU = 16000000`
+* `ARCH = AVR8`
+* `F_USB = $(F_CPU)`
+* `OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT`
+* `OPT_DEFS += -DBOOTLOADER_SIZE=4096`
+
+### Feature Options
+
+Use these to enable or disable building certain features. The more you have enabled the bigger your firmware will be, and you run the risk of building a firmware too large for your MCU.
+
+* `BOOTMAGIC_ENABLE`
+  * Virtual DIP switch configuration(+1000)
+* `MOUSEKEY_ENABLE`
+  * Mouse keys(+4700)
+* `EXTRAKEY_ENABLE`
+  * Audio control and System control(+450)
+* `CONSOLE_ENABLE`
+  * Console for debug(+400)
+* `COMMAND_ENABLE`
+  * Commands for debug and configuration
+* `NKRO_ENABLE`
+  * USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+* `AUDIO_ENABLE`
+  * Enable the audio subsystem.
+* `RGBLIGHT_ENABLE`
+  * Enable keyboard underlight functionality
+* `MIDI_ENABLE`
+  * MIDI controls
+* `UNICODE_ENABLE`
+  * Unicode
+* `BLUETOOTH_ENABLE`
+  * Enable Bluetooth with the Adafruit EZ-Key HID

docs/contributing.md

@@ -0,0 +1,152 @@
+# How To Contribute
+
+👍🎉 First off, thanks for taking the time to read this and contribute! 🎉👍
+
+Third-party contributions help us grow and improve QMK. We want to make the pull request and contribution process useful and easy for both contributors and maintainers. To this end we've put together some guidelines for contributors to help your pull request be accepted without major changes.
+
+* [Project Overview](#project-overview)
+* [Coding Conventions](#coding-conventions)
+* [General Guidelines](#general-guidelines)
+* [What does the Code of Conduct mean for me?](#what-does-the-code-of-conduct-mean-for-me)
+
+## I Don't Want To Read This Whole Thing I Just Have a Question!
+
+If you'd like to ask questions about QMK you can do so on the [OLKB Subreddit](https://reddit.com/r/olkb) or on [Gitter](https://gitter.im/qmk/qmk_firmware).
+
+Please keep these things in mind:
+
+* It may take several hours for someone to respond to your question. Please be patient!
+* Everyone involved with QMK is donating their time and energy. We don't get paid to work on or answer questions about QMK.
+* Try to ask your question so it's as easy to answer as possible. If you're not sure how to do that these are some good guides:
+  * https://opensource.com/life/16/10/how-ask-technical-questions
+  * http://www.catb.org/esr/faqs/smart-questions.html
+
+# Project Overview
+
+QMK is largely written in C, with specific features and parts written in C++. It targets embedded processors found in keyboards, particularly AVR ([LUFA](http://www.fourwalledcubicle.com/LUFA.php)) and ARM ([ChibiOS](http://www.chibios.com)). If you are already well versed in Arduino programming you'll find a lot of the concepts and limitations familiar. Prior experience with Arduino is not required to successfully contribute to QMK.
+
+<!-- FIXME: We should include a list of resources for learning C here. -->
+
+# Where can I go for help?
+
+If you need help you can [open an issue](https://github.com/qmk/qmk_firmware/issues) or [chat on gitter](http://gitter.im/QMK/qmk_firmware).
+
+# How Do I Make a Contribution?
+
+Never made an open source contribution before? Wondering how contributions work in QMK? Here's a quick rundown!
+
+0. Sign up for a [GitHub](https://github.com) account.
+1. Put together a keymap to contribute, [find an issue](https://github.com/qmk/qmk_firmware/issues) you are interested in addressing, or [a feature](https://github.com/qmk/qmk_firmware/issues?q=is%3Aopen+is%3Aissue+label%3Afeature) you would like to add.
+2. Fork the repository associated with the issue to your GitHub account. This means that you will have a copy of the repository under `your-GitHub-username/qmk_firmware`.
+3. Clone the repository to your local machine using `git clone https://github.com/github-username/repository-name.git`.
+4. If you're working on a new feature consider opening an issue to talk with us about the work you're about to undertake.
+5. Create a new branch for your fix using `git checkout -b branch-name-here`.
+6. Make the appropriate changes for the issue you are trying to address or the feature that you want to add.
+7. Use `git add insert-paths-of-changed-files-here` to add the file contents of the changed files to the "snapshot" git uses to manage the state of the project, also known as the index.
+8. Use `git commit -m "Insert a short message of the changes made here"` to store the contents of the index with a descriptive message.
+9. Push the changes to your repository on GitHub using `git push origin branch-name-here`.
+10. Submit a pull request to [QMK Firmware](https://github.com/qmk/qmk_firmware/pull/new/master).
+11. Title the pull request with a short description of the changes made and the issue or bug number associated with your change. For example, you can title an issue like so "Added more log outputting to resolve #4352".
+12. In the description of the pull request explain the changes that you made, any issues you think exist with the pull request you made, and any questions you have for the maintainer. It's OK if your pull request is not perfect (no pull request is), the reviewer will be able to help you fix any problems and improve it!
+13. Wait for the pull request to be reviewed by a maintainer.
+14. Make changes to the pull request if the reviewing maintainer recommends them.
+15. Celebrate your success after your pull request is merged!
+
+# Coding conventions
+
+Most of our style is pretty easy to pick up on, but right now it's not entirely consistent. You should match the style of the code surrounding your change, but if that code is inconsistent or unclear use the following guidelines:
+
+* We indent using two spaces (soft tabs)
+* We use One True Brace Style
+  * Opening Brace: At the end of the same line as the statement that opens the block
+  * Closing Brace: Lined up with the first character of the statement that opens the block
+  * Else If: Place the closing brace at the beginning of the line and the next opening brace at the end of the same line.
+  * Optional Braces: Always include optional braces.
+    * Good: if (condition) { return false; }
+    * Bad: if (condition) return false;
+* We use C style comments: /* */
+  * Think of them as a story describing the feature
+  * Use them liberally to explain why particular decisions were made.
+  * Do not write obvious comments
+  * If you not sure if a comment is obvious, go ahead and include it.
+* In general we don't wrap lines, they can be as long as needed. If you do choose to wrap lines please do not wrap any wider than 76 columns.
+
+# General Guidelines
+
+We have a few different types of changes in QMK, each requiring a different level of rigor. We'd like you to keep the following guidelines in mind no matter what type of change you're making.
+
+* Separate PR's into logical units. For example, do not submit one PR covering two separate features, instead submit a separate PR for each feature. 
+* Check for unnecessary whitespace with `git diff --check` before committing.
+* Make sure your code change actually compiles.
+  * Keymaps: Make sure that `make keyboard:your_new_keymap` does not return an error
+  * Keyboards: Make sure that `make keyboard:all` does not return any errors
+  * Core: Make sure that `make all` does not return any errors.
+* Make sure commit messages are understandable on their own. You should put a short description (no more than 70 characters) on the first line, the second line should be empty, and on the 3rd and later lines you should describe your commit in detail, if required. Example:
+
+```
+Adjust the fronzlebop for the kerpleplork
+
+The kerpleplork was intermittently failing with error code 23. The root cause was the fronzlebop setting, which causes the kerpleplork to activate every N iterations.
+
+Limited experimentation on the devices I have available shows that 7 is high enough to avoid confusing the kerpleplork, but I'd like to get some feedback from people with ARM devices to be sure.
+```
+
+## Documentation
+
+Documentation is one of the easiest ways to get started contributing to QMK. Finding places where the documentation is wrong or incomplete and fixing those is easy! We also very badly need someone to edit our documentation, so if you have editing skills but aren't sure where or how to jump in please [reach out for help](#where-can-i-go-for-help)!
+
+You'll find all our documentation in the `qmk_firmware/docs` directory, or if you'd rather use a web based workflow you can click "Suggest An Edit" at the top of each page on http://docs.qmk.fm/.
+
+## Keymaps
+
+Most first-time QMK contributors start with their personal keymaps. We try to keep keymap standards pretty casual (keymaps, after all, reflect the personality of their creators) but we do ask that you follow these guidelines to make it easier for others to discover and learn from your keymap.
+
+* Write a `readme.md` using [the template](https://docs.qmk.fm/documentation_templates.html#).
+* All Keymap PR's are squashed, so if you care about how your commits are squashed you should do it yourself
+* Do not lump features in with keymap PR's. Submit the feature first and then a second PR for the keymap.
+* Do not include `Makefile`s in your keymap folder (they're no longer used)
+* Update copyrights in file headers (look for `REPLACE_WITH_YOUR_NAME `)
+
+## Keyboards
+
+Keyboards are the raison d'être for QMK. Some keyboards are community maintained, while others are maintained by the people responsible for making a particular keyboard. The `readme.md` should tell you who maintains a particular keyboard. If you have questions relating to a particular keyboard you can [Open An Issue](https://github.com/qmk/qmk_firmware/issues) and tag the maintainer in your question.
+
+We also ask that you follow these guidelines: 
+
+* Write a `readme.md` using [the template](https://docs.qmk.fm/documentation_templates.html#).
+* Keep the number of commits reasonable or we will squash your PR
+* Do not lump core features in with new keyboards. Submit the feature first and then submit a separate PR for the keyboard.
+* Name `.c`/`.h` file after the immediate parent folder, eg `/keyboards/<kb1>/<kb2>/<kb2>.[ch]`
+* Do not include `Makefile`s in your keyboard folder (they're no longer used)
+* Update copyrights in file headers (look for `REPLACE_WITH_YOUR_NAME `)
+
+## Quantum/TMK Core
+
+Before you put a lot of work into building your new feature you should make sure you are implementing it in the best way. You can get a basic understanding of QMK by reading [Understaning QMK](understanding_qmk.html), which will take you on a tour of the QMK program flow. From here you should talk to us to get a sense of the best way to implement your idea. There are two main ways to do this:
+
+* [Chat on Gitter](https://gitter.im/qmk/qmk_firmware)
+* [Open an Issue](https://github.com/qmk/qmk_firmware/issues/new)
+
+Feature and Bug Fix PR's affect all keyboards. We are also in the process of restructuring QMK. For this reason it is especially important for significant changes to be discussed before implementation has happened. If you open a PR without talking to us first please be prepared to do some significant rework if your choices do not mesh well with our planned direction.
+
+Here are some things to keep in mind when working on your feature or bug fix.
+
+* **Disabled by default** - memory is a pretty limited on most chips QMK supports, and it's important that current keymaps aren't broken, so please allow your feature to be turned **on**, rather than being turned off. If you think it should be on by default, or reduces the size of the code, please talk with us about it.
+* **Compile locally before submitting** - hopefully this one is obvious, but things need to compile! Our Travis system will catch any issues, but it's generally faster for you to compile a few keyboards locally instead of waiting for the results to come back.
+* **Consider revisions and different chip-bases** - there are several keyboards that have revisions that allow for slightly different configurations, and even different chip-bases. Try to make a feature supported in ARM and AVR, or automatically disabled on platforms it doesn't work on.
+* **Explain your feature** - Document it in `docs/`, either as a new file or as part of an existing file. If you don't document it other people won't be able to benefit from your hard work.
+
+We also ask that you follow these guidelines: 
+
+* Keep the number of commits reasonable or we will squash your PR
+* Do not lump keyboards or keymaps in with core changes. Submit your core changes first.
+* Write [Unit Tests](http://docs.qmk.fm/unit_testing.html) for your feature
+* Follow the style of the file you are editing. If the style is unclear or there are mixed styles you should conform to the [coding conventions](#coding-conventions) above.
+
+## Refactoring
+
+To maintain a clear vision of how things are laid out in QMK we try to plan out refactors in-depth and have a collaborator make the changes. If you have an idea for refactoring, or suggestions, [open an issue](https://github.com/qmk/qmk_firmware/issues), we'd love to talk about how QMK can be improved.
+
+# What does the Code of Conduct mean for me?
+
+Our [Code of Conduct](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) means that you are responsible for treating everyone on the project with respect and courtesy regardless of their identity. If you are the victim of any inappropriate behavior or comments as described in our Code of Conduct, we are here for you and will do the best to ensure that the abuser is reprimanded appropriately, per our code.

docs/custom_quantum_functions.md

@@ -0,0 +1,176 @@
+# How To Customize Your Keyboard's Behavior
+
+For a lot of people a custom keyboard is about more than sending button presses to your computer. You want to be able to do things that are more complex than simple button presses and macros. QMK has hooks that allow you to inject code, override functionality, and otherwise customize how your keyboard behaves in different situations. 
+
+This page does not assume any special knowledge about QMK, but reading [Understanding QMK](understanding_qmk.html) will help you understand what is going on at a more fundamental level.
+
+## A Word on Core vs Keyboards vs Keymap
+
+We have structured QMK as a hierarchy:
+
+* Core (`_quantum`)
+  * Keyboard/Revision (`_kb`)
+    * Keymap (`_user`)
+
+Each of the functions described below can be defined with a `_kb()` suffix or a `_user()` suffix. We intend for you to use the `_kb()` suffix at the Keyboard/Revision level, while the `_user()` suffix should be used at the Keymap level.
+
+When defining functions at the Keyboard/Revision level it is important that your `_kb()` implementation call `_user()` before executing anything else- otherwise the keymap level function will never be called.
+
+# Custom Keycodes
+
+By far the most common task is to change the behavior of an existing keycode or to create a new keycode. From a code standpoint the mechanism for each is very similar.
+
+## Defining a New Keycode
+
+The first step to creating your own custom keycode(s) is to enumerate them. This means both naming them and assigning a unique number to that keycode. Rather than limit custom keycodes to a fixed range of numbers QMK provides the `SAFE_RANGE` macro. You can use `SAFE_RANGE` when enumerating your custom keycodes to guarantee that you get a unique number.
+
+
+Here is an example of enumerating 2 keycodes. After adding this block to your `keymap.c` you will be able to use `FOO` and `BAR` inside your keymap.
+
+```
+enum my_keycodes {
+  FOO = SAFE_RANGE,
+  BAR
+};
+```
+
+## Programming The Behavior Of Any Keycode
+
+When you want to override the behavior of an existing key, or define the behavior for a new key, you should use the `process_record_kb()` and `process_record_user()` functions. These are called by QMK during key processing before the actual key event is handled. If these functions return `true` QMK will process the keycodes as usual. That can be handy for extending the functionality of a key rather than replacing it. If these functions return `false` QMK will skip the normal key handling, and it will be up you to send any key up or down events that are required.
+
+These function are called every time a key is pressed or released.
+
+### Example `process_record_user()` implementation
+
+This example does two things. It defines the behavior for a custom keycode called `FOO`, and it supplements our Enter key by playing a tone whenever it is pressed.
+
+```
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case FOO:
+      if (record->event.pressed) {
+        // Do something when pressed
+      } else {
+        // Do something else when release
+      }
+      return false; // Skip all further processing of this key
+    case KC_ENTER:
+      // Play a tone when enter is pressed
+      if (record->event.pressed) {
+        PLAY_NOTE_ARRAY(tone_qwerty);
+      }
+      return true; // Let QMK send the enter press/release events
+  }
+}
+```
+
+### `process_record_*` Function documentation
+
+* Keyboard/Revision: `bool process_record_kb(uint16_t keycode, keyrecord_t *record)` 
+* Keymap: `bool process_record_user(uint16_t keycode, keyrecord_t *record)`
+
+The `keycode` argument is whatever is defined in your keymap, eg `MO(1)`, `KC_L`, etc. You should use a `switch...case` block to handle these events.
+
+The `record` argument contains infomation about the actual press:
+
+```
+keyrecord_t record {
++-keyevent_t event {
+| +-keypos_t key {
+| | +-uint8_t col
+| | +-uint8_t row
+| | }
+| +-bool     pressed
+| +-uint16_t time
+| }
+}
+```
+
+# LED Control
+
+This allows you to control the 5 LED's defined as part of the USB Keyboard spec. It will be called when the state of one of those 5 LEDs changes.
+
+* `USB_LED_NUM_LOCK`
+* `USB_LED_CAPS_LOCK`
+* `USB_LED_SCROLL_LOCK`
+* `USB_LED_COMPOSE`
+* `USB_LED_KANA`
+
+### Example `led_set_kb()` implementation
+
+```
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        PORTB |= (1<<0);
+    } else {
+        PORTB &= ~(1<<0);
+    }
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        PORTB |= (1<<1);
+    } else {
+        PORTB &= ~(1<<1);
+    }
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+        PORTB |= (1<<2);
+    } else {
+        PORTB &= ~(1<<2);
+    }
+    if (usb_led & (1<<USB_LED_COMPOSE_LOCK)) {
+        PORTB |= (1<<3);
+    } else {
+        PORTB &= ~(1<<3);
+    }
+    if (usb_led & (1<<USB_LED_KANA_LOCK)) {
+        PORTB |= (1<<4);
+    } else {
+        PORTB &= ~(1<<4);
+    }
+}
+```
+
+### `led_set_*` Function documentation
+
+* Keyboard/Revision: `void led_set_kb(uint8_t usb_led)` 
+* Keymap: `void led_set_user(uint8_t usb_led)`
+
+# Matrix Initialization Code
+
+Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i&#xb2;c controllers you will need to set up that hardware before it can be used.
+
+### Example `matrix_init_kb()` implementation
+
+This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
+
+```
+void matrix_init_kb(void) {
+  // Call the keymap level matrix init.
+  matrix_init_user();
+
+  // Set our LED pins as output
+  DDRB |= (1<<1);
+  DDRB |= (1<<2);
+  DDRB |= (1<<3);
+}
+```
+
+### `matrix_init_*` Function documentation
+
+* Keyboard/Revision: `void matrix_init_kb(void)` 
+* Keymap: `void matrix_init_user(void)`
+
+# Matrix Scanning Code
+
+Whenever possible you should customize your keyboard by using `process_record_*()` and hooking into events that way, to ensure that your code does not have a negative performance impact on your keyboard. However, in rare cases it is necessary to hook into the matrix scanning. Be extremely careful with the performance of code in these functions, as it will be called at least 10 times per second.
+
+### Example `matrix_scan_*` implementation
+
+This example has been deliberately omitted. You should understand enough about QMK internals to write this without an example before hooking into such a performance sensitive area. If you need help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) or [chat with us on gitter](https://gitter.im/qmk/qmk_firmware).
+
+### `matrix_scan_*` Function documentation
+
+* Keyboard/Revision: `void matrix_scan_kb(void)`
+* Keymap: `void matrix_scan_user(void)`
+
+This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot.
+
+You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LED's or a display) or other functionality that you want to trigger regularly even when the user isn't typing.

docs/documentation_best_practices.md

@@ -0,0 +1,97 @@
+# Documentation Best Practices
+
+This page exists to document best practices when writing documentation for QMK. Following these guidelines will help to keep a consistent tone and style, which will in turn help other people more easily understand QMK.
+
+# Page Opening
+
+Your documentation page should generally start with an H1 heading, followed by a 1 paragrah description of what the user will find on this page. Keep in mind that this heading and paragraph will sit next to the Table of Contents, so keep the heading short and avoid long strings with no whitespace.
+
+Example:
+
+```
+# My Page Title
+
+This page covers my super cool feature. You can use this feature to make coffee, squeeze fresh oj, and have an egg mcmuffin and hashbrowns delivered from your local macca's by drone.
+```
+
+# Headings
+
+Your page should generally have multiple "H1" headings. Only H1 and H2 headings will included in the Table of Contents, so plan them out appropriately. Excess width should be avoided in H1 and H2 headings to prevent the Table of Contents from getting too wide.
+
+# Styled Hint Blocks
+
+You can have styled hint blocks drawn around text to draw attention to it.
+
+```
+{% hint style='info' %}
+This uses `hint style='info'`
+{% endhint %}
+```
+
+### Examples:
+
+{% hint style='info' %}
+This uses `hint style='info'`
+{% endhint %}
+
+{% hint style='tip' %}
+This uses `hint style='tip'`
+{% endhint %}
+
+{% hint style='danger' %}
+This uses `hint style='danger'`
+{% endhint %}
+
+{% hint style='working' %}
+This uses `hint style='working'`
+{% endhint %}
+
+# Styled Terminal Blocks
+
+You can present styled terminal blocks by including special tokens inside your text block.
+
+```
+\`\`\`
+**[terminal]
+**[prompt foo@joe]**[path ~]**[delimiter  $ ]**[command ./myscript]
+Normal output line. Nothing special here...
+But...
+You can add some colors. What about a warning message?
+**[warning [WARNING] The color depends on the theme. Could look normal too]
+What about an error message?
+**[error [ERROR] This is not the error you are looking for]
+\`\`\`
+```
+
+### Example
+
+```
+**[terminal]
+**[prompt foo@joe]**[path ~]**[delimiter  $ ]**[command ./myscript]
+Normal output line. Nothing special here...
+But...
+You can add some colors. What about a warning message?
+**[warning [WARNING] The color depends on the theme. Could look normal too]
+What about an error message?
+**[error [ERROR] This is not the error you are looking for]
+```
+
+# Documenting Features
+
+If you create a new feature for QMK, create a documentation page for it. It doesn't have to be very long, a few sentances describing your feature and a table listing any relevant keycodes is enough. Here is a basic template:
+
+```markdown
+# My Cool Feature
+
+This page describes my cool feature. You can use my cool feature to make coffee and order cream and sugar to be delivered via drone.
+
+## My Cool Feature Keycodes
+
+|Long Name|Short Name|Description|
+|---------|----------|-----------|
+|KC_COFFEE||Make Coffee|
+|KC_CREAM||Order Cream|
+|KC_SUGAR||Order Sugar|
+```
+
+Place your documentation into `docs/feature_<my_cool_feature>.md`, and add that file to the appropriate place in `docs/_summary.md`. If you have added any keycodes be sure to add them to `docs/keycodes.md` with a link back to your feature page.

docs/documentation_templates.md

@@ -0,0 +1,42 @@
+# Documentation Templates
+
+This page documents the templates you should use when submitting new Keymaps and Keyboards to QMK.
+
+## Keymap `readme.md` Template
+
+Most keymaps have an image depicting the layout. You can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to create an image. Upload it to [Imgur](http://imgur.com) or another hosting service, please do not include images in your Pull Request.
+
+Below the image you should write a short description to help people understand your keymap.
+
+```
+![Clueboard Layout Image](http://i.imgur.com/7Capi8W.png)
+
+# Default Clueboard Layout
+
+This is the default layout that comes flashed on every Clueboard. For the most
+part it's a straightforward and easy to follow layout. The only unusual key is
+the key in the upper left, which sends Escape normally, but Grave when any of
+the Ctrl, Alt, or GUI modifiers are held down.
+```
+
+## Keyboard `readme.md` Template
+
+```
+# Planck
+
+![Planck](http://i.imgur.com/q2M3uEU.jpg)
+
+A compact 40% (12x4) ortholinear keyboard kit made and sold by OLKB and Massdrop. [More info on qmk.fm](http://qmk.fm/planck/)
+
+Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert)  
+Hardware Supported: Planck PCB rev1, rev2, rev3, rev4, Teensy 2.0  
+Hardware Availability: [OLKB.com](https://olkb.com), [Massdrop](https://www.massdrop.com/buy/planck-mechanical-keyboard?mode=guest_open)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make planck/rev4:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+```
+
+There needs to be two spaces at the end of the `Keyboard Maintainer` and `Hardware Supported` lines for it to render correctly with Markdown.

docs/eclipse.md

@@ -0,0 +1,86 @@
+# Setting Up Eclipse for QMK Development
+
+[Eclipse](https://en.wikipedia.org/wiki/Eclipse_(software)) is an open-source [Integrated Development Environment](https://en.wikipedia.org/wiki/Integrated_development_environment) (IDE) widely used for Java development, but with an extensible plugin system that allows to customize it for other languages and usages.
+
+Using an IDE such as Eclipse provides many advantages over a plain text editor, such as:
+* intelligent code completion
+* convenient navigation in the code
+* refactoring tools
+* build automation (no need for the command-line)
+* a GUI for GIT
+* static code analysis
+* many other tools such as debugging, code formatting, showing call hierarchies etc.
+
+The purpose of the is page is to document how to set-up Eclipse for developing AVR software, and working on the QMK code base.
+
+Note that this set-up has been tested on Ubuntu 16.04 only for the moment.
+
+# Prerequisites
+## Build environment
+Before starting, you must have followed the [Getting Started](home.md#getting-started) section corresponding to your system. In particular, you must have been able to build the firmware with [the `make` command](../#the-make-command).
+
+## Java
+Eclipse is a Java application, so you will need to install Java 8 or more recent to be able to run it. You may choose between the JRE or the JDK, the latter being useful if you intend to do Java development.
+
+# Install Eclipse and its plugins
+Eclipse comes in [several flavours](http://www.eclipse.org/downloads/eclipse-packages/) depending on the target usage that you will have. There is no package comprising the AVR stack, so we will need to start from Eclipse CDT (C/C++ Development Tooling) and install the necessary plugins.
+
+## Download and install Eclipse CDT
+If you already have Eclipse CDT on your system, you can skip this step. However it is advised to keep it up-to-date for better support.
+
+If you have another Eclipse package installed, it is normally possible to [install the CDT plugin over it](https://eclipse.org/cdt/downloads.php). However it is probably better to reinstall it from scratch to keep it light and avoid the clutter of tools that you don't need for the projects you will be working on.
+
+Installation is very simple: follow the [5 Steps to Install Eclipse](https://eclipse.org/downloads/eclipse-packages/?show_instructions=TRUE), and choose **Eclipse IDE for C/C++ Developers** at Step 3.
+
+Alternatively, you can also directly [download Eclipse IDE for C/C++ Developers](http://www.eclipse.org/downloads/eclipse-packages/) ([direct link to current version](http://www.eclipse.org/downloads/packages/eclipse-ide-cc-developers/neonr)) and extract the package to the location of your choice (this creates an `eclipse` folder).
+
+## First Launch
+When installation is complete, click the <kbd>Launch</kbd> button. (If you extracted the package manually, open the Eclipse installation folder and double-click the `eclipse` executable)
+
+When you are prompted with the Workspace Selector, select a directory that will hold Eclipse metadata and usually your projects. **Do not select the `qmk_firmware` directory**, this will be the project directory. Select the parent folder instead, or another (preferably empty) folder of your choice (the default is fine if you do not use it yet).
+
+Once started, click the <kbd>Workbench</kbd> button at the top right to switch to the workbench view (there is a also checkbox at the bottom to skip the welcome screen at startup).
+
+## Install the necessary plugins
+Note: you do not need to restart Eclipse after installing each plugin. Simply restart once all plugins are installed.
+
+### [The AVR plugin](http://avr-eclipse.sourceforge.net/)
+This is the most important plugin as it will allow Eclipse to _understand_ AVR C code. Follow [the instructions for using the update site](http://avr-eclipse.sourceforge.net/wiki/index.php/Plugin_Download#Update_Site), and agree with the security warning for unsigned content.
+
+### [ANSI Escape in Console](https://marketplace.eclipse.org/content/ansi-escape-console)
+This plugin is necessary to properly display the colored build output generated by the QMK makefile.
+
+1. Open <kbd><kbd>Help</kbd> > <kbd>Eclipse Marketplace…</kbd></kbd>
+2. Search for _ANSI Escape in Console_
+3. Click the <samp>Install</samp> button of the plugin
+4. Follow the instructions and agree again with the security warning for unsigned content.
+
+Once both plugins are installed, restart Eclipse as prompted.
+
+# Configure Eclipse for QMK
+## Importing the project
+1. Click <kbd><kbd>File</kbd> > <kbd>New</kbd> > <kbd>Makefile Project with Existing Code</kbd></kbd>
+2. On the next screen:
+  * Select the directory where you cloned the repository as _Existing Code Location_;
+  * (Optional) Give a different name to the project¹, e.g. _QMK_ or _Quantum_;
+  * Select the _AVR-GCC Toolchain_;
+  * Keep the rest as-is and click <kbd>Finish</kbd>
+
+  ![Importing QMK in Eclipse](http://i.imgur.com/oHYR1yW.png)
+
+3. The project will now be loaded and indexed. Its files can be browsed easily through the _Project Explorer_ on the left.
+
+¹ There might be issues for importing the project with a custom name. If it does not work properly, try leaving the default project name (i.e. the name of the directory, probably `qmk_firmware`).
+
+## Build your keyboard
+We will now configure a make target that cleans the project and builds the keymap of your choice.
+
+1. On the right side of the screen, select the <kbd>Make Target</kbd> tab
+2. Expand the folder structure to the keyboard of your choice, e.g. `qmk_firmware/keyboards/ergodox`
+3. Right-click on the keyboard folder and select <kbd>New…</kbd> (or select the folder and click the <kbd>New Make Target</kbd> icon above the tree)
+4. Choose a name for your build target, e.g. _clean \<your keymap\>_
+5. Make Target: this is the arguments that you give to `make` when building from the command line. If your target name does not match these arguments, uncheck <kbd>Same as target name</kbd> and input the correct arguments, e.g. `clean <your keymap>`
+6. Leave the other options checked and click <kbd>OK</kbd>. Your make target will now appear under the selected keyboard.
+7. (Optional) Toggle the <kbd>Hide Empty Folders</kbd> icon button above the targets tree to only show your build target.
+8. Double-click the build target you created to trigger a build.
+9. Select the <kbd>Console</kbd> view at the bottom to view the running build.

docs/faq.md

@@ -0,0 +1,6 @@
+# Frequently Asked Questions
+
+* [General](faq_general.md)
+* [Building or Compiling QMK](faq_build.md)
+* [Debugging and Troubleshooting QMK](faq_debug.md)
+* [Keymap](faq_keymap.md)

docs/faq_build.md

@@ -0,0 +1,91 @@
+# Frequently Asked Build Questions
+
+This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](make_instructions.md) guides.
+
+## Can't program on Linux
+You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
+
+In short when your controller is ATMega32u4,
+    
+    $ sudo dfu-programmer atmega32u4 erase --force
+    $ sudo dfu-programmer atmega32u4 flash your.hex
+    $ sudo dfu-programmer atmega32u4 reset
+
+or just
+
+    $ sudo make <keyboard>:<keymap>:dfu
+
+But to run `make` with root privilege is not good idea. Use former method if possible.
+
+## WINAVR is obsolete
+It is no longer recommended and may cause some problem.
+See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
+
+## USB VID and PID
+You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
+
+Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
+
+Also see this.
+https://github.com/tmk/tmk_keyboard/issues/150
+
+You can buy a really unique VID:PID here. I don't think you need this for personal use.
+- http://www.obdev.at/products/vusb/license.html
+- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
+
+## Linux udev rules
+On Linux you need proper privilege to access device file of MCU, you'll have to use `sudo` when flashing firmware. You can circumvent this with placing these files in `/etc/udev/rules.d/`.
+
+**/etc/udev/rules.d/50-atmel-dfu.rules:**
+```
+# Atmel ATMega32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", MODE:="0666"
+# Atmel USBKEY AT90USB1287
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", MODE:="0666"
+# Atmel ATMega32U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="0666"
+```
+
+**/etc/udev/rules.d/52-tmk-keyboard.rules:**
+```
+# tmk keyboard products     https://github.com/tmk/tmk_keyboard
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
+```
+
+
+## Cortex: cstddef: No such file or directory
+GCC 4.8 of Ubuntu 14.04 had this problem and had to update to 4.9 with this PPA.
+https://launchpad.net/~terry.guo/+archive/ubuntu/gcc-arm-embedded
+
+https://github.com/tmk/tmk_keyboard/issues/212
+https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef
+https://developer.mbed.org/forum/mbed/topic/5205/
+
+
+## `clock_prescale_set` and `clock_div_1` not available
+Your toolchain is too old to support the MCU. For example WinAVR 20100110 doesn't support ATMega32u2.
+
+```
+Compiling C: ../../tmk_core/protocol/lufa/lufa.c
+avr-gcc -c -mmcu=atmega32u2 -gdwarf-2 -DF_CPU=16000000UL -DINTERRUPT_CONTROL_ENDPOINT -DBOOTLOADER_SIZE=4096 -DF_USB=16000000UL -DARCH=ARCH_AVR8 -DUSB_DEVICE_ONLY -DUSE_FLASH_DESCRIPTORS -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -DFIXED_CONTROL_ENDPOINT_SIZE=8  -DFIXED_NUM_CONFIGURATIONS=1 -DPROTOCOL_LUFA -DEXTRAKEY_ENABLE -DCONSOLE_ENABLE -DCOMMAND_ENABLE -DVERSION=unknown -Os -funsigned-char -funsigned-bitfields -ffunction-sections -fdata-sections -fno-inline-small-functions -fpack-struct -fshort-enums -fno-strict-aliasing -Wall -Wstrict-prototypes -Wa,-adhlns=obj_alps64/protocol/lufa/lufa.lst -I. -I../../tmk_core -I../../tmk_core/protocol/lufa -I../../tmk_core/protocol/lufa/LUFA-git -I../../tmk_core/common -std=gnu99 -include config.h -MMD -MP -MF .dep/obj_alps64_protocol_lufa_lufa.o.d  ../../tmk_core/protocol/lufa/lufa.c -o obj_alps64/protocol/lufa/lufa.o
+../../tmk_core/protocol/lufa/lufa.c: In function 'setup_mcu':
+../../tmk_core/protocol/lufa/lufa.c:575: warning: implicit declaration of function 'clock_prescale_set'
+../../tmk_core/protocol/lufa/lufa.c:575: error: 'clock_div_1' undeclared (first use in this function)
+../../tmk_core/protocol/lufa/lufa.c:575: error: (Each undeclared identifier is reported only once
+../../tmk_core/protocol/lufa/lufa.c:575: error: for each function it appears in.)
+make: *** [obj_alps64/protocol/lufa/lufa.o] Error 1
+```
+
+
+## BOOTLOADER_SIZE for AVR
+Note that Teensy2.0++ bootloader size is 2048byte. Some Makefiles may have wrong comment.
+
+```
+# Boot Section Size in *bytes*    
+#   Teensy halfKay   512          
+#   Teensy++ halfKay 2048         
+#   Atmel DFU loader 4096       (TMK Alt Controller)
+#   LUFA bootloader  4096         
+#   USBaspLoader     2048         
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+```

docs/faq_debug.md

@@ -0,0 +1,242 @@
+# Debugging FAQ
+
+This page details various common questions people have about troubleshooting their keyboards.
+
+# Debug Console
+
+## hid_listen can't recognize device
+When debug console of your device is not ready you will see like this:
+
+```
+Waiting for device:.........
+```
+
+once the device is pluged in then *hid_listen* finds it you will get this message:
+
+```
+Waiting for new device:.........................
+Listening:
+```
+
+If you can't get this 'Listening:' message try building with `CONSOLE_ENABLE=yes` in [Makefile]
+
+You may need privilege to access the device on OS like Linux.
+- try `sudo hid_listen`
+
+## Can't get message on console
+Check:
+- *hid_listen* finds your device. See above.
+- Enable debug with pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
+- set `debug_enable=true` usually in `matrix_init()` in **matrix.c**.
+- try using 'print' function instead of debug print. See **common/print.h**.
+- disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
+
+## Linux or UNIX like system requires Super User privilege
+Just use 'sudo' to execute *hid_listen* with privilege.
+```
+$ sudo hid_listen
+```
+
+Or add an *udev rule* for TMK devices with placing a file in rules directory. The directory may vary on each system.
+
+File: /etc/udev/rules.d/52-tmk-keyboard.rules(in case of Ubuntu)
+```
+# tmk keyboard products     https://github.com/tmk/tmk_keyboard
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
+```
+
+***
+
+# Miscellaneous
+## Safety Considerations
+
+You probably don't want to "brick" your keyboard, making it impossible
+to rewrite firmware onto it.  Here are some of the parameters to show
+what things are (and likely aren't) too risky.
+
+- If your keyboard map does not include RESET, then, to get into DFU
+  mode, you will need to press the reset button on the PCB, which
+  requires unscrewing the bottom.
+- Messing with tmk_core / common files might make the keyboard
+  inoperable
+- Too large a .hex file is trouble; `make dfu` will erase the block,
+  test the size (oops, wrong order!), which errors out, failing to
+  flash the keyboard, leaving it in DFU mode.
+  - To this end, note that the maximum .hex file size on Planck is
+    7000h (28672 decimal)
+
+```
+Linking: .build/planck_rev4_cbbrowne.elf                                                            [OK]
+Creating load file for Flash: .build/planck_rev4_cbbrowne.hex                                       [OK]
+
+Size after:
+   text    data     bss     dec     hex filename
+      0   22396       0   22396    577c planck_rev4_cbbrowne.hex
+```
+
+  - The above file is of size 22396/577ch, which is less than
+    28672/7000h
+  - As long as you have a suitable alternative .hex file around, you
+    can retry, loading that one
+  - Some of the options you might specify in your keyboard's Makefile
+    consume extra memory; watch out for BOOTMAGIC_ENABLE,
+    MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE, API_SYSEX_ENABLE
+- DFU tools do /not/ allow you to write into the bootloader (unless
+  you throw in extra fruitsalad of options), so there is little risk
+  there.
+- EEPROM has around a 100000 write cycle.  You shouldn't rewrite the
+  firmware repeatedly and continually; that'll burn the EEPROM
+  eventually.
+## NKRO Doesn't work
+First you have to compile frimware with this build option `NKRO_ENABLE` in **Makefile**.
+
+Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work you need to switch to **6KRO** mode, in particular when you are in BIOS.
+
+If your firmware built with `BOOTMAGIC_ENABLE` you need to turn its switch on by `BootMagic` **N** command(`Space+N` by default). This setting is stored in EEPROM and keeped over power cycles.
+
+https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch
+
+
+## TrackPoint needs reset circuit(PS/2 mouse support)
+Without reset circuit you will have inconsistent reuslt due to improper initialize of the hardware. See circuit schematic of TPM754.
+
+- http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447
+- http://www.mikrocontroller.net/attachment/52583/tpm754.pdf
+
+
+## Can't read column of matrix beyond 16 
+Use `1UL<<16` instead of `1<<16` in `read_cols()` in [matrix.h] when your columns goes beyond 16.
+
+In C `1` means one of [int] type which is [16bit] in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use [unsigned long] type with `1UL`.
+
+http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
+
+
+## Bootloader jump doesn't work
+Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**.
+```
+# Size of Bootloaders in bytes:
+#   Atmel DFU loader(ATmega32U4)   4096    
+#   Atmel DFU loader(AT90USB128)   8192    
+#   LUFA bootloader(ATmega32U4)    4096             
+#   Arduino Caterina(ATmega32U4)   4096             
+#   USBaspLoader(ATmega***)        2048             
+#   Teensy   halfKay(ATmega32U4)   512              
+#   Teensy++ halfKay(AT90USB128)   2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+```
+AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet.
+Note that **Word**(2 bytes) size and address are used in datasheet while TMK uses **Byte**.
+
+AVR Boot section is located at end of Flash memory like the followings.
+```
+byte     Atmel/LUFA(ATMega32u4)          byte     Atmel(AT90SUB1286)
+0x0000   +---------------+               0x00000  +---------------+
+         |               |                        |               |
+         |               |                        |               |
+         |  Application  |                        |  Application  |
+         |               |                        |               | 
+         =               =                        =               =
+         |               | 32KB-4KB               |               | 128KB-8KB
+0x6000   +---------------+               0x1E000  +---------------+
+         |  Bootloader   | 4KB                    |  Bootloader   | 8KB
+0x7FFF   +---------------+               0x1FFFF  +---------------+
+
+ 
+byte     Teensy(ATMega32u4)              byte     Teensy++(AT90SUB1286)
+0x0000   +---------------+               0x00000  +---------------+
+         |               |                        |               |
+         |               |                        |               |
+         |  Application  |                        |  Application  |
+         |               |                        |               |
+         =               =                        =               =
+         |               | 32KB-512B              |               | 128KB-2KB
+0x7E00   +---------------+               0x1FC00  +---------------+
+         |  Bootloader   | 512B                   |  Bootloader   | 2KB
+0x7FFF   +---------------+               0x1FFFF  +---------------+
+```
+
+And see this discussion for further reference.
+https://github.com/tmk/tmk_keyboard/issues/179
+
+
+## Special Extra key doesn't work(System, Audio control keys)
+You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK.
+
+```
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+```
+
+## Wakeup from sleep doesn't work
+
+In Windows check `Allow this device to wake the computer` setting in Power **Management property** tab of **Device Manager**. Also check BIOS setting.
+
+Pressing any key during sleep should wake host.
+
+## Using Arduino?
+
+**Note that Arduino pin naming is different from actual chip.** For example, Arduino pin `D0` is not `PD0`. Check circuit with its schematics yourself.
+
+- http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf
+- http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf
+
+Arduino leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem.
+
+
+## Using PF4-7 pins of USB AVR?
+You need to set JTD bit of MCUCR yourself to use PF4-7 as GPIO. Those pins are configured to serve JTAG function by default. MCUs like ATMega*U* or AT90USB* are affeteced with this.
+
+If you are using Teensy this isn't needed. Teensy is shipped with JTAGEN fuse bit unprogrammed to disable the function.
+
+See this code.
+```
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+```
+https://github.com/tmk/tmk_keyboard/blob/master/keyboard/hbkb/matrix.c#L67
+
+And read **26.5.1 MCU Control Register – MCUCR** of ATMega32U4 datasheet.
+
+
+## Adding LED indicators of Lock keys
+You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post.
+
+http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560
+
+## Program Arduino Micro/Leonardo
+Push reset button and then run command like this within 8 seconds.
+
+```
+avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0
+```
+
+Device name will vary depending on your system.
+
+http://arduino.cc/en/Main/ArduinoBoardMicro
+https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
+
+
+## USB 3 compatibility
+I heard some people have a problem with USB 3 port, try USB 2 port.
+
+
+## Mac compatibility
+### OS X 10.11 and Hub
+https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034
+
+
+## Problem on BIOS(UEFI)/Resume(Sleep&Wake)/Power cycles
+Some people reported their keyboard stops working on BIOS and/or after resume(power cycles).
+
+As of now root of its cause is not clear but some build options seem to be related. In Makefile try to disable those options like `CONSOLE_ENABLE`, `NKRO_ENABLE`, `SLEEP_LED_ENABLE` and/or others. 
+
+https://github.com/tmk/tmk_keyboard/issues/266
+https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778
+
+
+
+## FLIP doesn't work
+### AtLibUsbDfu.dll not found
+Remove current driver and reinstall one FLIP provides from DeviceManager.
+http://imgur.com/a/bnwzy

docs/faq_general.md

@@ -0,0 +1,20 @@
+# Frequently Asked Questions
+
+## What is QMK?
+
+[QMK](https://github.com/qmk), short for Quantum Mechanical Keyboard, is a group of people building tools for custom keyboards. We started with the [QMK firmware](https://github.com/qmk/qmk_firmware), a heavily modified fork of [TMK](https://github.com/tmk/tmk_keyboard).
+
+### Why the name Quantum?
+
+<!-- FIXME -->
+
+## What Differences Are There Between QMK and TMK?
+
+TMK was originally designed and implemented by [Jun Wako](https://github.com/tmk). QMK started as [Jack Humbert](https://github.com/jackhumbert)'s fork of TMK for the Planck. After a while Jack's fork had diverged quite a bit from TMK, and in 2015 Jack decided to rename his fork to QMK.
+
+From a technical standpoint QMK builds upon TMK by adding several new features. Most notably QMK has expanded the number of available keycodes and uses these to implement advanced features like `S()`, `LCTL()`, and `MO()`. You can see a complete list of these keycodes in [Keycodes](keycodes.md).
+
+From a project and community management standpoint TMK maintains all the officially supported keyboards by himself, with a bit of community support. Separate community maintained forks exist or can be created for other keyboards. Only a few keymaps are provided by default, so users typically don't share keymaps with each other. QMK encourages sharing of both keyboards and keymaps through a centrally managed repository, accepting all pull requests that follow the quality standards. These are mostly community maintained, but the QMK team also helps when necessary.
+
+Both approaches have their merits and their drawbacks, and code flows freely between TMK and QMK when it makes sense.
+

docs/faq_keymap.md

@@ -0,0 +1,224 @@
+# Keymap FAQ
+
+This page covers questions people often have about keymaps. If you haven't you should read [Keymap Overview](keymap.md) first.
+
+## What Keycodes Can I Use?
+See [Keycodes](keycodes.md) for an index of keycodes available to you. These link to more extensive documentation when available.
+
+Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h).
+
+## What Are The Default Keycodes?
+
+There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JIS. North America primarily uses ANSI, Europe and Africa primarily use ISO, and Japan uses JIS. Regions not mentioned typically use either ANSI or ISO. The keycodes corresponding to these layouts are shown here:
+
+<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/9ce023dc6caadc0cf11c88c782350a8c -->
+![Keyboard Layout Image](https://i.imgur.com/45m4mRf.png)
+
+## The Menu Key Isn't Working
+
+The key found on most modern keyboards that is located between `KC_RGUI` and `KC_RCTL` is actually called `KC_APP`. This is because when that key was invented there was already a key named `MENU` in the relevant standards, so MS chose to call that the `APP` key.
+
+## `KC_SYSREQ` isn't working
+Use keycode for Print Screen(`KC_PSCREEN` or `KC_PSCR`) instead of `KC_SYSREQ`. Key combination of 'Alt + Print Screen' is recognized as 'System request'.
+
+See [issue #168](https://github.com/tmk/tmk_keyboard/issues/168) and
+- http://en.wikipedia.org/wiki/Magic_SysRq_key
+- http://en.wikipedia.org/wiki/System_request
+
+## Power key doesn't work
+Use `KC_PWR` instead of `KC_POWER` or vice versa.
+- `KC_PWR` works with Windows and Linux, not with OSX.
+- `KC_POWER` works with OSX and Linux, not with Windows.
+
+More info: http://geekhack.org/index.php?topic=14290.msg1327264#msg1327264
+
+## Oneshot modifier
+Solves my personal 'the' problem. I often got 'the' or 'THe' wrongly instead of 'The'.  Oneshot Shift mitgates this for me.
+https://github.com/tmk/tmk_keyboard/issues/67
+
+## Modifier/Layer stuck
+Modifier keys or layers can be stuck unless layer switching is configured properly.
+For Modifier keys and layer actions you have to place `KC_TRANS` on same position of destination layer to  unregister the modifier key or return to previous layer on release event.
+
+- https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#31-momentary-switching
+- http://geekhack.org/index.php?topic=57008.msg1492604#msg1492604
+- https://github.com/tmk/tmk_keyboard/issues/248
+
+
+## Mechanical Lock Switch Support
+
+This feature is for *mechanical lock switch* like [this Alps one](http://deskthority.net/wiki/Alps_SKCL_Lock). You can enable it by adding this to your `config.h`:
+ 
+```
+#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_RESYNC_ENABLE
+```
+
+After enabling this feature use keycodes `KC_LCAP`, `KC_LNUM` and `KC_LSCR` in your keymap instead.
+
+Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `KC_CAPS`, `KC_NLCK` and `KC_SLCK`.***
+
+## Input special charactors other than ASCII like Cédille 'Ç'
+NO UNIVERSAL METHOD TO INPUT THOSE WORKS OVER ALL SYSTEMS. You have to define **MACRO** in way specific to your OS or layout.
+
+See this post for example **MACRO** code.
+
+http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620
+
+On **Windows** you can use `AltGr` key or **Alt code**.
+- http://en.wikipedia.org/wiki/AltGr_key
+- http://en.wikipedia.org/wiki/Alt_code
+
+On **Mac** OS defines `Option` key combinations.
+- http://en.wikipedia.org/wiki/Option_key#Alternative_keyboard_input
+
+On **Xorg** you can use `compose` key, instead.
+- http://en.wikipedia.org/wiki/Compose_key
+
+And see this for **Unicode** input.
+- http://en.wikipedia.org/wiki/Unicode_input
+
+
+## Apple/Mac keyboard Fn
+Not supported.
+
+Apple/Mac keyboard sends keycode for Fn unlike most of other keyboards.
+I think you can send Apple Fn key using Apple venter specific Page 0xff01 and usage 0x0003. But you have to change HID Report Descriptor for this, of course.
+
+https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/AppleHIDUsageTables.h
+
+
+## Media control keys in Mac OSX
+#### KC_MNXT and KC_MPRV does not work on Mac
+Use `KC_MFFD`(`KC_MEDIA_FAST_FORWARD`) and `KC_MRWD`(`KC_MEDIA_REWIND`) instead of `KC_MNXT` and `KC_MPRV`.
+See https://github.com/tmk/tmk_keyboard/issues/195
+
+
+## Keys supported in Mac OSX?
+You can know which keycodes are supported in OSX from this source code.
+
+`usb_2_adb_keymap` array maps Keyboard/Keypad Page usages to ADB scancodes(OSX internal keycodes).
+
+https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/Cosmo_USB2ADB.c
+
+And `IOHIDConsumer::dispatchConsumerEvent` handles Consumer page usages.
+
+https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/IOHIDConsumer.cpp
+
+
+## JIS keys in Mac OSX
+Japanese JIS keyboard specific keys like `無変換(Muhenkan)`, `変換(Henkan)`, `ひらがな(hiragana)` are not recognized on OSX. You can use **Seil** to enable those keys, try following options.
+
+* Enable NFER Key on PC keyboard
+* Enable XFER Key on PC keyboard
+* Enable KATAKANA Key on PC keyboard
+
+https://pqrs.org/osx/karabiner/seil.html
+
+
+## RN-42 Bluetooth doesn't work with Karabiner
+Karabiner - Keymapping tool on Mac OSX - ignores inputs from RN-42 module by default. You have to enable this option to make Karabiner working with your keyboard.
+https://github.com/tekezo/Karabiner/issues/403#issuecomment-102559237
+
+See these for the deail of this problem.
+https://github.com/tmk/tmk_keyboard/issues/213
+https://github.com/tekezo/Karabiner/issues/403
+
+
+## Esc and `~ on a key
+
+Use `GRAVE_ESC` or `KC_GESC` in your keymap. `GUI`+`GRAVE_ESC` results in `` ` `` and `SHIFT`+`GRAVE_ESC` results in `~`.
+
+Note that this will break the CTRL+SHIFT+ESC shortcut to the Windows task manager. Use `#define GRAVE_ESC_CTRL_OVERRIDE` in your `config.h` to get the shortcut back. With this option, `ESC_GRAVE` results in `ESC` if `CTRL` is held, even if `SHIFT` or `GUI` are also held.
+
+## Arrow on Right Modifier keys with Dual-Role
+This turns right modifer keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed **TAP**.
+```
+
+#include "keymap_common.h"
+
+
+/* Arrow keys on right modifier keys with TMK dual role feature
+ *
+ *  https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role
+ *  https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: qwerty */
+    [0] = KEYMAP( \
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS,BSPC, \
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
+        LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \
+        LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,FN0, ESC, \
+        FN4, LGUI,LALT,          SPC,                     APP, FN2, FN1, FN3),
+    [1] = KEYMAP( \
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, TRNS,TRNS, \
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \
+        TRNS,TRNS,TRNS,          TRNS,                    TRNS,FN7, FN6, FN8),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
+    [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
+    [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
+    [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
+    [4] = ACTION_LAYER_MOMENTARY(1),
+    [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP),
+    [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN),
+    [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME),
+    [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END),
+};
+
+```
+
+Dual-role key: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
+
+
+## Eject on Mac OSX
+`KC_EJCT` keycode works on OSX. https://github.com/tmk/tmk_keyboard/issues/250
+It seems Windows 10 ignores the code and Linux/Xorg recognizes but has no mapping by default.
+
+Not sure what keycode Eject is on genuine Apple keyboard actually. HHKB uses `F20` for Eject key(`Fn+f`) on Mac mode but this is not same as Apple Eject keycode probably.
+
+
+## What's weak_mods and real_mods in action_util.c
+___TO BE IMPROVED___
+
+real_mods is intended to retains state of real/physical modifier key state, while
+weak_mods retains state of virtual or temprary modifiers which should not affect state real modifier key.
+
+Let's say you hold down physical left shift key and type ACTION_MODS_KEY(LSHIFT, KC_A), 
+
+with weak_mods,
+* (1) hold down left shift: real_mods |= MOD_BIT(LSHIFT)
+* (2) press ACTION_MODS_KEY(LSHIFT, KC_A): weak_mods |= MOD_BIT(LSHIFT)
+* (3) release ACTION_MODS_KEY(LSHIFT, KC_A): waek_mods &= ~MOD_BIT(LSHIFT)
+real_mods still keeps modifier state.
+
+without weak mods,
+* (1) hold down left shift: real_mods |= MOD_BIT(LSHIFT)
+* (2) press ACTION_MODS_KEY(LSHIFT, KC_A): real_mods |= MOD_BIT(LSHIFT)
+* (3) release ACTION_MODS_KEY(LSHIFT, KC_A): real_mods &= ~MOD_BIT(LSHIFT)
+here real_mods lost state for 'physical left shift'.
+
+weak_mods is ORed with real_mods when keyboard report is sent.
+https://github.com/tmk/tmk_core/blob/master/common/action_util.c#L57
+
+## Timer functionality
+
+It's possible to start timers and read values for time-specific events - here's an example:
+
+```c
+static uint16_t key_timer;
+key_timer = timer_read();
+
+if (timer_elapsed(key_timer) < 100) {
+  // do something if less than 100ms have passed
+} else {
+  // do something if 100ms or more have passed
+}
+```
+
+It's best to declare the `static uint16_t key_timer;` at the top of the file, outside of any code blocks you're using it in.

docs/feature_advanced_keycodes.md

@@ -0,0 +1,165 @@
+# Advanced Keycodes
+
+Your keymap can include keycodes that are more advanced than normal, for example shifted keys. This page documents the functions that are available to you.
+
+### Assigning Custom Names
+
+People often define custom names using `#define`. For example:
+
+```c
+#define FN_CAPS LT(_FL, KC_CAPSLOCK)
+#define ALT_TAB LALT(KC_TAB)
+```
+
+This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping it more readable.
+
+### Limits of these aliases
+
+Currently, the keycodes able to used with these functions are limited to the [Basic Keycodes](keycodes_basic.html), meaning you can't use keycodes like `KC_TILD`, or anything greater than 0xFF. For a full list of the keycodes able to be used see [Basic Keycodes](keycodes_basic.html).
+
+# Switching and toggling layers
+
+These functions allow you to activate layers in various ways.
+
+* `MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer.
+* `LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped.
+* `TG(layer)` - toggles a layer on or off.
+* `TO(layer)` - Goes to a layer. This code is special, because it lets you go either up or down the stack -- just goes directly to the layer you want. So while other codes only let you go _up_ the stack (from layer 0 to layer 3, for example), `TO(2)` is going to get you to layer 2, no matter where you activate it from -- even if you're currently on layer 5. This gets activated on keydown (as soon as the key is pressed).
+* `TT(layer)` - Layer Tap-Toggle. If you hold the key down, the layer becomes active, and then deactivates when you let go. And if you tap it, the layer simply becomes active (toggles on). It needs 5 taps by default, but you can set it by defining `TAPPING_TOGGLE`, for example, `#define TAPPING_TOGGLE 2` for just two taps.
+
+# Working With Layers
+
+Care must be taken when switching layers, it's possible to lock yourself into a layer with no way to deactivate that layer (without unplugging your keyboard.) We've created some guidelines to help users avoid the most common problems.
+
+### Beginners
+
+If you are just getting started with QMK you will want to keep everything simple. Follow these guidelines when setting up your layers:
+
+* Setup layer 0 as your "base" layer. This is your normal typing layer, and could be whatever layout you want (qwerty, dvorak, colemak, etc.)
+* Arrange your layers in a "tree" layout, with layer 0 as the root. Do not try to enter the same layer from more than one other layer.
+* Never try to stack a higher numbered layer on top of a lower numbered layer. Doing so is tricky and error prone.
+
+### Intermediate Users
+
+Sometimes you need more than one base layer. For example, if you want to switch between QWERTY and Dvorak, switch between layouts for different countries, or switch your layout for different videogames. Your base layers should always be the lowest numbered layers. When you have multiple base layers you should always treat them as mutually exclusive. When one base layer is on the others are off. 
+
+### Advanced Users
+
+Once you have a good feel for how layers work and what you can do, you can get more creative. The rules listed in the beginner section will help you be successful by avoiding some of the tricker details but they can be constraining, especially for ultra-compact keyboard users. Understanding how layers work will allow you to use them in more advanced ways.
+
+Layers stack on top of each other in numerical order. When determining what a keypress does, QMK scans the layers from the top down, stopping when it reaches the first active layer that is not set to `KC_TRNS`. As a result if you activate a layer that is numerically lower than your current layer, and your current layer (or another layer that is active and higher than your target layer) has something other than `KC_TRNS`, that is the key that will be sent, not the key on the layer you just activated. This is the cause of most people's "why doesn't my layer get switched" problem.
+
+# Modifier keys
+
+These functions allow you to combine a mod with a keycode. When pressed the keydown for the mod will be sent first, and then *kc* will be sent. When released the keyup for *kc* will be sent and then the mod will be sent.
+
+* `LSFT(kc)` or `S(kc)` - applies left Shift to *kc* (keycode)
+* `RSFT(kc)` - applies right Shift to *kc*
+* `LCTL(kc)` - applies left Control to *kc*
+* `RCTL(kc)` - applies right Control to *kc*
+* `LALT(kc)` - applies left Alt to *kc*
+* `RALT(kc)` - applies right Alt to *kc*
+* `LGUI(kc)` - applies left GUI (command/win) to *kc*
+* `RGUI(kc)` - applies right GUI (command/win) to *kc*
+* `HYPR(kc)` - applies Hyper (all modifiers) to *kc*
+* `MEH(kc)`  - applies Meh (all modifiers except Win/Cmd) to *kc*
+* `LCAG(kc)` - applies CtrlAltGui to *kc*
+
+You can also chain these, like this:
+
+    LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress.
+
+# Shifted Keycodes
+
+The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols.
+
+|Name|Description|
+|----|-----------|
+| KC_TILD | ~ |
+| KC_EXLM | ! |
+| KC_QUES | ? |
+| KC_AT | @ |
+| KC_HASH | # |
+| KC_DLR  | $ |
+| KC_PERC | % |
+| KC_CIRC | ^ |
+| KC_AMPR | & |
+| KC_ASTR | * |
+| KC_LPRN | ( |
+| KC_RPRN | ) |
+| KC_UNDS | _ |
+| KC_PLUS | + |
+| KC_DQUO | " |
+| KC_LCBR | { |
+| KC_RCBR | } |
+| KC_LABK | < |
+| KC_RABK | > |
+| KC_PIPE | &#x7C; |
+| KC_COLN | : |
+
+# Mod Tap
+
+`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down.
+
+These are the values you can use for the `mod` in `MT()` and `OSM()`:
+
+  * MOD_LCTL
+  * MOD_LSFT
+  * MOD_LALT
+  * MOD_LGUI
+  * MOD_RCTL
+  * MOD_RSFT
+  * MOD_RALT
+  * MOD_RGUI
+  * MOD_HYPR
+  * MOD_MEH
+
+These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped. Note however, that you cannot mix right and left side modifiers.
+
+We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact:
+
+  * `CTL_T(kc)` - is LCTL when held and *kc* when tapped
+  * `SFT_T(kc)` - is LSFT when held and *kc* when tapped
+  * `ALT_T(kc)` - is LALT when held and *kc* when tapped
+  * `ALGR_T(kc)` - is AltGr when held and *kc* when tapped
+  * `GUI_T(kc)` - is LGUI when held and *kc* when tapped
+  * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)
+  * `LCAG_T(kc)` - is CtrlAltGui when held and *kc* when tapped
+  * `MEH_T(kc)` - is like Hyper, but not as cool -- does not include the Cmd/Win key, so just sends Alt+Ctrl+Shift.
+
+# One Shot Keys
+
+One shot keys are keys that remain active until the next key is pressed, and then are releasd. This allows you to type keyboard combinations without pressing more than one key at a time.
+
+For example, if you define a key as `OSM(MOD_LSFT)`, you can type a capital A character by first pressing and releasing shift, and then pressing and releasing A. Your computer will see the shift key being held the moment shift is pressed, and it will see the shift key being released immediately after A is released.
+
+One shot keys also work as normal modifiers. If you hold down a one shot key and type other keys, your one shot will be released immediately after you let go of the key.
+
+You can control the behavior of one shot keys by defining these in `config.h`:
+
+```c
+#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped this number of times again. */
+#define ONESHOT_TIMEOUT 5000  /* Time (in ms) before the one shot key is released */
+```
+
+* `OSM(mod)` - Momentarily hold down *mod*. You must use the `MOD_*` keycodes as shown in [Mod Tap](#mod-tap), not the `KC_*` codes.
+* `OSL(layer)` - momentary switch to *layer*.
+
+## Permissive Hold
+
+As of [PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/), there is a new `config.h` option:
+
+```
+#define PERMISSIVE_HOLD
+```
+
+This makes it easier for fast typists to use dual-function keys. Without this, if you let go of a held key inside the tapping term, it won't register.
+
+Example: (Tapping Term = 200ms)
+
+- SHFT_T(KC_A) Down
+- KC_X Down
+- KC_X Up
+- SHFT_T(KC_A) Up
+
+With defaults, if above is typed within tapping term, this will emit `ax`. With permissive hold, if above is typed within tapping term, this will emit `X` (so, Shift+X).

docs/feature_audio.md

@@ -0,0 +1,204 @@
+# Audio
+
+Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any AVR keyboard that allows access to the C6 or B5 port (`#define C6_AUDIO` and/or `#define B5_AUDIO`), you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
+
+If you add `AUDIO_ENABLE = yes` to your `rules.mk`, there's a couple different sounds that will automatically be enabled without any other configuration:
+
+```
+STARTUP_SONG // plays when the keyboard starts up (audio.c)
+GOODBYE_SONG // plays when you press the RESET key (quantum.c)
+AG_NORM_SONG // plays when you press AG_NORM (quantum.c)
+AG_SWAP_SONG // plays when you press AG_SWAP (quantum.c)
+MUSIC_ON_SONG // plays when music mode is activated (process_music.c)
+MUSIC_OFF_SONG // plays when music mode is deactivated (process_music.c)
+CHROMATIC_SONG // plays when the chromatic music mode is selected (process_music.c)
+GUITAR_SONG // plays when the guitar music mode is selected (process_music.c)
+VIOLIN_SONG // plays when the violin music mode is selected (process_music.c)
+MAJOR_SONG // plays when the major music mode is selected (process_music.c)
+```
+
+You can override the default songs by doing something like this in your `config.h`:
+
+```c
+#ifdef AUDIO_ENABLE
+  #define STARTUP_SONG SONG(STARTUP_SOUND)
+#endif
+```
+
+A full list of sounds can be found in [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h) - feel free to add your own to this list! All available notes can be seen in [quantum/audio/musical_notes.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/musical_notes.h).
+
+To play a custom sound at a particular time, you can define a song like this (near the top of the file):
+
+```c
+float my_song[][2] = SONG(QWERTY_SOUND);
+```
+
+And then play your song like this:
+
+```c
+PLAY_SONG(my_song);
+```
+
+Alternatively, you can play it in a loop like this:
+
+```c
+PLAY_LOOP(my_song);
+```
+
+It's advised that you wrap all audio features in `#ifdef AUDIO_ENABLE` / `#endif` to avoid causing problems when audio isn't built into the keyboard.
+
+## Music mode
+
+The music mode maps your columns to a chromatic scale, and your rows to octaves. This works best with ortholinear keyboards, but can be made to work with others. All keycodes less than `0xFF` get blocked, so you won't type while playing notes - if you have special keys/mods, those will still work. A work-around for this is to jump to a different layer with KC_NOs before (or after) enabling music mode.  
+
+Recording is experimental due to some memory issues - if you experience some weird behavior, unplugging/replugging your keyboard will fix things.
+
+Keycodes available:
+
+* `MU_ON` - Turn music mode on
+* `MU_OFF` - Turn music mode off
+* `MU_TOG` - Toggle music mode
+* `MU_MOD` - Cycle through the music modes:
+  * `CHROMATIC_MODE` - Chromatic scale, row changes the octave
+  * `GUITAR_MODE` - Chromatic scale, but the row changes the string (+5 st)
+  * `VIOLIN_MODE` - Chromatic scale, but the row changes the string (+7 st)
+  * `MAJOR_MODE` - Major scale
+
+In music mode, the following keycodes work differently, and don't pass through:
+
+* `LCTL` - start a recording
+* `LALT` - stop recording/stop playing
+* `LGUI` - play recording
+* `KC_UP` - speed-up playback
+* `KC_DOWN` - slow-down playback
+
+By default, `MUSIC_MASK` is set to `keycode < 0xFF` which means keycodes less than `0xFF` are turned into notes, and don't output anything. You can change this by defining this in your `config.h` like this:
+
+    #define MUSIC_MASK keycode != KC_NO
+
+Which will capture all keycodes - be careful, this will get you stuck in music mode until you restart your keyboard!
+
+The pitch standard (`PITCH_STANDARD_A`) is 440.0f by default - to change this, add something like this to your `config.h`:
+
+    #define PITCH_STANDARD_A 432.0f
+
+## MIDI functionalty
+
+This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile.
+
+<!-- FIXME: this formatting needs work
+
+## Audio
+
+```c
+#ifdef AUDIO_ENABLE
+    AU_ON,
+    AU_OFF,
+    AU_TOG,
+
+    #ifdef FAUXCLICKY_ENABLE
+        FC_ON,
+        FC_OFF,
+        FC_TOG,
+    #endif
+
+    // Music mode on/off/toggle
+    MU_ON,
+    MU_OFF,
+    MU_TOG,
+
+    // Music voice iterate
+    MUV_IN,
+    MUV_DE,
+#endif
+```
+
+### Midi
+
+#if !MIDI_ENABLE_STRICT || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))
+    MI_ON,  // send midi notes when music mode is enabled
+    MI_OFF, // don't send midi notes when music mode is enabled
+#endif
+
+MIDI_TONE_MIN,
+MIDI_TONE_MAX
+
+MI_C = MIDI_TONE_MIN,
+MI_Cs,
+MI_Db = MI_Cs,
+MI_D,
+MI_Ds,
+MI_Eb = MI_Ds,
+MI_E,
+MI_F,
+MI_Fs,
+MI_Gb = MI_Fs,
+MI_G,
+MI_Gs,
+MI_Ab = MI_Gs,
+MI_A,
+MI_As,
+MI_Bb = MI_As,
+MI_B,
+
+MIDI_TONE_KEYCODE_OCTAVES > 1
+
+where x = 1-5:
+MI_C_x,
+MI_Cs_x,
+MI_Db_x = MI_Cs_x,
+MI_D_x,
+MI_Ds_x,
+MI_Eb_x = MI_Ds_x,
+MI_E_x,
+MI_F_x,
+MI_Fs_x,
+MI_Gb_x = MI_Fs_x,
+MI_G_x,
+MI_Gs_x,
+MI_Ab_x = MI_Gs_x,
+MI_A_x,
+MI_As_x,
+MI_Bb_x = MI_As_x,
+MI_B_x,
+
+MI_OCT_Nx 1-2
+MI_OCT_x 0-7
+MIDI_OCTAVE_MIN = MI_OCT_N2,
+MIDI_OCTAVE_MAX = MI_OCT_7,
+MI_OCTD, // octave down
+MI_OCTU, // octave up
+
+MI_TRNS_Nx 1-6
+MI_TRNS_x 0-6
+MIDI_TRANSPOSE_MIN = MI_TRNS_N6,
+MIDI_TRANSPOSE_MAX = MI_TRNS_6,
+MI_TRNSD, // transpose down
+MI_TRNSU, // transpose up
+
+MI_VEL_x 1-10
+MIDI_VELOCITY_MIN = MI_VEL_1,
+MIDI_VELOCITY_MAX = MI_VEL_9,
+MI_VELD, // velocity down
+MI_VELU, // velocity up
+
+MI_CHx 1-16
+MIDI_CHANNEL_MIN = MI_CH1
+MIDI_CHANNEL_MAX = MI_CH16,
+MI_CHD, // previous channel
+MI_CHU, // next channel
+
+MI_ALLOFF, // all notes off
+
+MI_SUS, // sustain
+MI_PORT, // portamento
+MI_SOST, // sostenuto
+MI_SOFT, // soft pedal
+MI_LEG,  // legato
+
+MI_MOD, // modulation
+MI_MODSD, // decrease modulation speed
+MI_MODSU, // increase modulation speed
+#endif // MIDI_ADVANCED
+
+-->

docs/feature_auto_shift.md

@@ -0,0 +1,158 @@
+# Auto Shift: Why do we need a shift key?
+
+Tap a key and you get its character. Tap a key, but hold it *slightly* longer
+and you get its shifted state. Viola! No shift key needed!
+
+## Why Auto Shift?
+
+Many people suffer from various forms of RSI. A common cause is stretching your
+fingers repetitively long distances. For us on the keyboard, the pinky does that
+all too often when reaching for the shift key. Auto Shift looks to alleviate that
+problem.
+
+## How does it work?
+
+When you tap a key, it stays depressed for a short period of time before it is
+then released. This depressed time is a different length for everyone. Auto Shift
+defines a constant `AUTO_SHIFT_TIMEOUT` which is typically set to twice your
+normal pressed state time. When you press a key, a timer starts and then stops
+when you release the key. If the time depressed is greater than or equal to the
+`AUTO_SHIFT_TIMEOUT`, then a shifted version of the key is emitted. If the time
+is less than the `AUTO_SHIFT_TIMEOUT` time, then the normal state is emitted.
+
+## Are there limitations to Auto Shift?
+
+Yes, unfortunately.
+
+1. Key repeat will cease to work. For example, before if you wanted 20 'a'
+   characters, you could press and hold the 'a' key for a second or two. This no
+   longer works with Auto Shift because it is timing your depressed time instead
+   of emitting a depressed key state to your operating system.
+2. Auto Shift is disabled for any key press that is accompanied by one or more
+   modifiers. Thus, Ctrl+A that you hold for a really long time is not the same
+   as Ctrl+Shift+A.
+3. You will have characters that are shifted when you did not intend on shifting, and
+   other characters you wanted shifted, but were not. This simply comes down to
+   practice. As we get in a hurry, we think we have hit the key long enough
+   for a shifted version, but we did not. On the other hand, we may think we are
+   tapping the keys, but really we have held it for a little longer than
+   anticipated.
+
+## How do I enable Auto Shift?
+
+Add to your `rules.mk` in the keymap folder:
+
+    AUTO_SHIFT_ENABLE = YES
+
+If no `rules.mk` exists, you can create one.
+
+Then compile and install your new firmware with Auto Key enabled! That's it!
+
+## Configuring Auto Shift
+
+If desired, there is some configuration that can be done to change the
+behavior of Auto Shift. This is done by setting various variables the
+`config.h` file located in your keymap folder. If no `config.h` file exists, you can create one.
+
+A sample is
+
+    #ifndef CONFIG_USER_H
+    #define CONFIG_USER_H
+
+    #include "../../config.h"
+
+    #define AUTO_SHIFT_TIMEOUT 150
+    #define NO_AUTO_SHIFT_SPECIAL
+
+    #endif
+
+### AUTO_SHIFT_TIMEOUT (value in ms)
+
+This controls how long you have to hold a key before you get the shifted state.
+Obviously, this is different for everyone. For the common person, a setting of
+135 to 150 works great. However, one should start with a value of at least 175, which
+is the default value. Then work down from there. The idea is to have the shortest time required to get the shifted state without having false positives.
+
+Play with this value until things are perfect. Many find that all will work well
+at a given value, but one or two keys will still emit the shifted state on
+occassion. This is simply due to habit and holding some keys a little longer
+than others. Once you find this value, work on tapping your problem keys a little
+quicker than normal and you will be set.
+
+{% hint style='info' %}
+Auto Shift has three special keys that can help you get this value right very
+quick. See "Auto Shift Setup" for more details!
+{% endhint %}
+
+### NO_AUTO_SHIFT_SPECIAL (simple define)
+
+Do not Auto Shift special keys, which include -_, =+, [{, ]}, ;:, '", ,<, .>,
+and /?
+
+### NO_AUTO_SHIFT_NUMERIC (simple define)
+
+Do not Auto Shift numeric keys, zero through nine.
+
+### NO_AUTO_SHIFT_ALPHA (simple define)
+
+Do not Auto Shift alpha characters, which include A through Z.
+
+## Using Auto Shift Setup
+
+This will enable you to define three keys temporailiy to increase, decrease and report your `AUTO_SHIFT_TIMEOUT`.
+
+### Setup
+
+Map three keys temporarily in your keymap:
+
+| Key Name | Description                                         |
+|----------|-----------------------------------------------------|
+| KC_ASDN  | Lower the Auto Shift timeout variable (down)        |
+| KC_ASUP  | Raise the Auto Shift timeout variable (up)          |
+| KC_ASRP  | Report your current Auto Shift timeout value        |
+
+Compile and upload your new firmware.
+
+### Use
+
+It is important to note that during these tests, you should be typing
+completely normal and with no intention of shifted keys.
+
+1. Type multiple sentences of alphabetical letters.
+2. Observe any upper case letters.
+3. If there are none, press the key you have mapped to `KC_ASDN` to decrease
+   time Auto Shift timeout value and go back to step 1.
+4. If there are some upper case letters, decide if you need to work on tapping
+   those keys with less down time, or if you need to increase the timeout.
+5. If you decide to increase the timeout, press the key you have mapped to
+   `KC_ASUP` and go back to step 1.
+6. Once you are happy with your results, press the key you have mapped to
+   `KC_ASRP`. The keyboard will type by itself the value of your
+   `AUTO_SHIFT_TIMEOUT`.
+7. Update `AUTO_SHIFT_TIMEOUT` in your `config.h` with the value reported.
+8. Remove `AUTO_SHIFT_SETUP` from your `config.h`.
+9. Remove the key bindings `KC_ASDN`, `KC_ASUP` and `KC_ASRP`.
+10. Compile and upload your new firmware.
+
+#### An example run
+
+    hello world. my name is john doe. i am a computer programmer playing with
+    keyboards right now.
+
+    [PRESS KC_ASDN quite a few times]
+
+    heLLo woRLd. mY nAMe is JOHn dOE. i AM A compUTeR proGRaMMER PlAYiNG witH
+    KEYboArDS RiGHT NOw.
+
+    [PRESS KC_ASUP a few times]
+
+    hello world. my name is john Doe. i am a computer programmer playing with
+    keyboarDs right now.
+
+    [PRESS KC_ASRP]
+
+    115
+
+The keyboard typed `115` which represents your current `AUTO_SHIFT_TIMEOUT`
+value. You are now set! Practice on the *D* key a little bit that showed up
+in the testing and you'll be golden.

docs/feature_backlight.md

@@ -0,0 +1,17 @@
+# Backlighting
+
+<!-- FIXME: Describe how backlighting works in QMK -->
+
+## Backlight Keycodes
+
+These keycodes control the backlight. Most keyboards use this for single color in-switch lighting.
+
+|Name|Description|
+|----|-----------|
+|`BL_x`|Set a specific backlight level between 0-9|
+|`BL_ON`|An alias for `BL_9`|
+|`BL_OFF`|An alias for `BL_0`|
+|`BL_DEC`|Turn the backlight level down by 1|
+|`BL_INC`|Turn the backlight level up by 1|
+|`BL_TOGG`|Toggle the backlight on or off|
+|`BL_STEP`|Step through backlight levels, wrapping around to 0 when you reach the top.|

docs/feature_bluetooth.md

@@ -0,0 +1,17 @@
+# Bluetooth
+
+## Bluetooth functionality
+
+This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will.
+
+<!-- FIXME: Document bluetooth support more completely. -->
+
+## Bluetooth Keycodes
+
+This is used when multiple keyboard outputs can be selected. Currently this only allows for switching between USB and Bluetooth on keyboards that support both.
+
+|Name|Description|
+|----|-----------|
+|`OUT_AUTO`|auto mode|
+|`OUT_USB`|usb only|
+|`OUT_BT`|bluetooth|

docs/feature_bootmagic.md

@@ -0,0 +1,29 @@
+# Bootmagic
+
+<!-- FIXME: Describe the bootmagic feature here. -->
+
+## Bootmagic Keycodes
+
+Shortcuts for bootmagic options. You can use these even when bootmagic is off.
+
+|Name|Description|
+|----|-----------|
+|`MAGIC_SWAP_CONTROL_CAPSLOCK`|Swap Capslock and Left Control|
+|`MAGIC_CAPSLOCK_TO_CONTROL`|Treat Capslock like a Control Key|
+|`MAGIC_SWAP_LALT_LGUI`|Swap the left Alt and GUI keys|
+|`MAGIC_SWAP_RALT_RGUI`|Swap the right Alt and GUI keys|
+|`MAGIC_NO_GUI`|Disable the GUI key|
+|`MAGIC_SWAP_GRAVE_ESC`|Swap the Grave and Esc key.|
+|`MAGIC_SWAP_BACKSLASH_BACKSPACE`|Swap backslash and backspace|
+|`MAGIC_HOST_NKRO`|Force NKRO on|
+|`MAGIC_SWAP_ALT_GUI`/`AG_SWAP`|Swap Alt and Gui on both sides|
+|`MAGIC_UNSWAP_CONTROL_CAPSLOCK`|Disable the Control/Capslock swap|
+|`MAGIC_UNCAPSLOCK_TO_CONTROL`|Disable treating Capslock like Control |
+|`MAGIC_UNSWAP_LALT_LGUI`|Disable Left Alt and GUI switching|
+|`MAGIC_UNSWAP_RALT_RGUI`|Disable Right Alt and GUI switching|
+|`MAGIC_UNNO_GUI`|Enable the GUI key |
+|`MAGIC_UNSWAP_GRAVE_ESC`|Disable the Grave/Esc swap |
+|`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|Disable the backslash/backspace swap|
+|`MAGIC_UNHOST_NKRO`|Force NKRO off|
+|`MAGIC_UNSWAP_ALT_GUI`/`AG_NORM`|Disable the Alt/GUI switching|
+|`MAGIC_TOGGLE_NKRO`|Turn NKRO on or off|

docs/feature_dynamic_macros.md

@@ -0,0 +1,63 @@
+# Dynamic macros: record and replay macros in runtime
+
+QMK supports temporary macros created on the fly. We call these Dynamic Macros. They are defined by the user from the keyboard and are lost when the keyboard is unplugged or otherwise rebooted.
+
+You can store one or two macros and they may have a combined total of 128 keypresses. You can increase this size at the cost of RAM.
+
+To enable them, first add a new element to the `planck_keycodes` enum — `DYNAMIC_MACRO_RANGE`:
+
+```c
+enum planck_keycodes {
+	QWERTY = SAFE_RANGE,
+	COLEMAK,
+	DVORAK,
+	PLOVER,
+	LOWER,
+	RAISE,
+	BACKLIT,
+	EXT_PLV,
+	DYNAMIC_MACRO_RANGE,
+};
+```
+
+It must be the last element because `dynamic_macros.h` will add some more keycodes after it.
+
+Below it, include the `dynamic_macro.h` header:
+
+```c
+	#include "dynamic_macro.h"`
+```
+
+Add the following keys to your keymap:
+
+* `DYN_REC_START1` — start recording the macro 1,
+* `DYN_REC_START2` — start recording the macro 2,
+* `DYN_MACRO_PLAY1` — replay the macro 1,
+* `DYN_MACRO_PLAY2` — replay the macro 2,
+* `DYN_REC_STOP` — finish the macro that is currently being recorded.
+
+Add the following code to the very beginning of your `process_record_user()` function:
+
+```c
+	if (!process_record_dynamic_macro(keycode, record)) {
+		return false;
+	}
+```
+
+That should be everything necessary. To start recording the macro, press either `DYN_REC_START1` or `DYN_REC_START2`. To finish the recording, press the `DYN_REC_STOP` layer button. To replay the macro, press either `DYN_MACRO_PLAY1` or `DYN_MACRO_PLAY2`.
+
+Note that it's possible to replay a macro as part of a macro. It's ok to replay macro 2 while recording macro 1 and vice versa but never create recursive macros i.e. macro 1 that replays macro 1. If you do so and the keyboard will get unresponsive, unplug the keyboard and plug it again.
+
+For users of the earlier versions of dynamic macros: It is still possible to finish the macro recording using just the layer modifier used to access the dynamic macro keys, without a dedicated `DYN_REC_STOP` key. If you want this behavior back, use the following snippet instead of the one above:
+
+```c
+	uint16_t macro_kc = (keycode == MO(_DYN) ? DYN_REC_STOP : keycode);
+	
+	if (!process_record_dynamic_macro(macro_kc, record)) {
+		return false;
+	}
+```
+
+If the LEDs start blinking during the recording with each keypress, it means there is no more space for the macro in the macro buffer. To fit the macro in, either make the other macro shorter (they share the same buffer) or increase the buffer size by setting the `DYNAMIC_MACRO_SIZE` preprocessor macro (default value: 128; please read the comments for it in the header).
+
+For the details about the internals of the dynamic macros, please read the comments in the `dynamic_macro.h` header.

docs/feature_key_lock.md

@@ -0,0 +1,11 @@
+## Key Lock: Holding down keys for you
+
+Sometimes, you need to hold down a specific key for a long period of time. Whether this is while typing in ALL CAPS, or playing a video game that hasn't implemented auto-run, Key Lock is here to help. Key Lock adds a new keycode, `KC_LOCK`, that will hold down the next key you hit for you. The key is released when you hit it again. Here's an example: let's say you need to type in all caps for a few sentences. You hit KC_LOCK, and then shift. Now, shift will be considered held until you hit it again. You can think of key lock as caps lock, but supercharged.
+
+Here's how to use it:
+
+1. Pick a key on your keyboard. This will be the key lock key. Assign it the keycode `KC_LOCK`. This will be a single-action key: you won't be able to use it for anything else.
+2. Enable key lock by including `KEY_LOCK_ENABLE = yes` in your Makefile.
+3. That's it!
+
+Important: switching layers does not cancel the key lock. Additionally, key lock is only able to hold standard action keys and One Shot modifier keys (for example, if you have your shift defined as `OSM(KC_LSFT)`; see [One Shot Keys](quantum_keycodes.md#one-shot-keys)). This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as KC_LPRN. If it's in the [basic_keycodes](basic_keycodes.md) list, it can be held. If it's not, then it can't be.

docs/feature_layouts.md

@@ -0,0 +1,76 @@
+# Layouts: Using a keymap with multiple keyboards
+
+The `layouts/` folder contains different physical key layouts that can apply to different keyboards. 
+
+```
+layouts/
++ default/
+| + 60_ansi/
+| | + readme.md
+| | + layout.json
+| | + a_good_keymap/
+| | | + keymap.c
+| | | + readme.md
+| | | + config.h
+| | | + rules.mk
+| | + <keymap folder>/
+| | + ...
+| + <layout folder>/
++ community/
+| + <layout folder>/
+| + ...
+```
+
+The `layouts/default/` and `layouts/community/` are two examples of layout "repositories" - currently `default` will contain all of the information concerning the layout, and one default keymap named `default_<layout>`, for users to use as a reference. `community` contains all of the community keymaps, with the eventual goal of being split-off into a separate repo for users to clone into `layouts/`. QMK searches through all folders in `layouts/`, so it's possible to have multiple reposistories here. 
+
+Each layout folder is named (`[a-z0-9_]`) after the physical aspects of the layout, in the most generic way possible, and contains a `readme.md` with the layout to be defined by the keyboard:
+
+```md
+# 60_ansi
+
+   LAYOUT_60_ansi
+```
+
+New names should try to stick to the standards set by existing layouts, and can be discussed in the PR/Issue.
+
+## Supporting a layout
+
+For a keyboard to support a layout, the variable (`[a-z0-9_]`) must be defined in it's `<keyboard>.h`, and match the number of arguments/keys (and preferrably the physical layout):
+
+    #define LAYOUT_60_ansi KEYMAP_ANSI
+
+The folder name must be added to the keyboard's `rules.mk`:
+
+    LAYOUTS = 60_ansi
+
+`LAYOUTS` can be set in any keyboard folder level's `rules.mk`:
+
+    LAYOUTS = 60_iso
+
+but the `LAYOUT_<layout>` variable must be defined in `<folder>.h` as well.
+
+## Tips for making layouts keyboard-agnostic
+
+Instead of using `#include "planck.h"`, you can use this line to include whatever `<keyboard>.h` (`<folder>.h` should not be included here) file that is being compiled:
+
+    #include QMK_KEYBOARD_H
+
+In your config.h, you can also use this variable to include the keyboard's `config.h`:
+
+    #include QMK_KEYBOARD_CONFIG_H
+
+If you want to keep some keyboard-specific code, you can use these variables to escape it with an `#ifdef` statement:
+
+* `KEYBOARD_<folder1>_<folder2>`
+
+For example:
+
+```c
+#ifdef KEYBOARD_planck
+    #ifdef KEYBOARD_planck_rev4
+        planck_rev4_function();
+    #endif
+#endif
+```
+
+Note that the names are lowercase and match the folder/file names for the keyboard/revision exactly.

docs/feature_macros.md

@@ -0,0 +1,220 @@
+# Macros
+
+Macros allow you to send multiple keystrokes when pressing just one key. QMK has a number of ways to define and use macros. These can do anything you want: type common phrases for you, copypasta, repetitive game movements, or even help you code. 
+
+{% hint style='danger' %}
+**Security Note**: While it is possible to use macros to send passwords, credit card numbers, and other sensitive information it is a supremely bad idea to do so. Anyone who gets ahold of your keyboard will be able to access that information by opening a text editor.
+{% endhint %}
+
+## The new way: `SEND_STRING()` & `process_record_user`
+
+Sometimes you just want a key to type out words or phrases. For the most common situations we've provided `SEND_STRING()`, which will type out your string for you. All ascii that is easily translated to a keycode is supported (eg `\n\t`).
+
+For example:
+
+```c
+enum custom_keycodes {
+	PRINT_TRUTH = SAFE_RANGE
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	if (record->event.pressed) {
+		switch(keycode) {
+			case PRINT_TRUTH:
+				SEND_STRING("QMK is the best thing ever!");
+				return false; break;
+		}
+	}
+	return true;
+};
+```
+
+### Tap/down/up
+
+You can send arbitary keycodes by wrapping them in:
+
+* `SS_TAP()`
+* `SS_DOWN()`
+* `SS_UP()`
+
+For example:
+
+    SEND_STRING(SS_TAP(X_HOME));
+
+Would tap `KC_HOME` - note how the prefix is now `X_`, and not `KC_`. You can also combine this with other strings, like this:
+
+    SEND_STRING("VE"SS_TAP(X_HOME)"LO");
+
+Which would send "VE" followed by a `KC_HOME` tap, and "LO" (spelling "LOVE" if on a newline).
+
+There's also a couple of mod shortcuts you can use:
+
+* `SS_LCTRL(string)`
+* `SS_LGUI(string)`
+* `SS_LALT(string)`
+
+That can be used like this:
+
+    SEND_STRING(SS_LCTRL("a"));
+
+Which would send LCTRL+a (LTRL down, a, LTRL up) - notice that they take strings (eg `"k"`), and not the `X_K` keycodes.
+
+### Alternative keymaps
+
+By default, it assumes a US keymap with a QWERTY layout; if you want to change that (e.g. if your OS uses software Colemak), include this somewhere in your keymap:
+
+    #include <sendstring_colemak.h>
+
+### Strings in memory
+
+If for some reason you're manipulating strings and need to print out something you just generated (instead of being a literal, constant string), you can use `send_string()`, like this:
+
+```c
+char my_str[4] = "ok.";
+send_string(my_str);
+```
+
+The shortcuts defined above won't work with `send_string()`, but you can separate things out to different lines if needed:
+
+```c
+char my_str[4] = "ok.";
+SEND_STRING("I said: ");
+send_string(my_str);
+SEND_STRING(".."SS_TAP(X_END));
+```
+
+## The old way: `MACRO()` & `action_get_macro`
+
+{% hint style='info' %}
+This is inherited from TMK, and hasn't been updated - it's recommend that you use `SEND_STRING` and `process_record_user` instead.
+{% endhint %}
+
+By default QMK assumes you don't have any macros. To define your macros you create an `action_get_macro()` function. For example:
+
+```c
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	if (record->event.pressed) {
+		switch(id) {
+			case 0:
+				return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
+			case 1:
+				return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
+		}
+	}
+	return MACRO_NONE;
+};
+```
+
+This defines two macros which will be run when the key they are assigned to is pressed. If instead you'd like them to run when the key is released you can change the if statement:
+
+	if (!record->event.pressed) {
+
+### Macro Commands
+
+A macro can include the following commands:
+
+* I() change interval of stroke in milliseconds.
+* D() press key.
+* U() release key.
+* T() type key(press and release).
+* W() wait (milliseconds).
+* END end mark.
+
+### Mapping a Macro to a key
+
+Use the `M()` function within your `KEYMAP()` to call a macro. For example, here is the keymap for a 2-key keyboard:
+
+```c
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = KEYMAP(
+		M(0), M(1)
+	),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	if (record->event.pressed) {
+		switch(id) {
+			case 0:
+				return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
+			case 1:
+				return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
+		}
+	}
+	return MACRO_NONE;
+};
+```
+
+When you press the key on the left it will type "Hi!" and when you press the key on the right it will type "Bye!".
+
+### Naming your macros
+
+If you have a bunch of macros you want to refer to from your keymap while keeping the keymap easily readable you can name them using `#define` at the top of your file.
+
+```c
+#define M_HI M(0)
+#define M_BYE M(1)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = KEYMAP(
+		M_HI, M_BYE
+	),
+};
+```
+
+## Advanced macro functions
+
+There are some functions you may find useful in macro-writing. Keep in mind that while you can write some fairly advanced code within a macro if your functionality gets too complex you may want to define a custom keycode instead. Macros are meant to be simple.
+
+### `record->event.pressed`
+
+This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is
+
+```c
+	if (record->event.pressed) {
+		// on keydown
+	} else {
+		// on keyup
+	}
+```
+
+### `register_code(<kc>);`
+
+This sends the `<kc>` keydown event to the computer. Some examples would be `KC_ESC`, `KC_C`, `KC_4`, and even modifiers such as `KC_LSFT` and `KC_LGUI`.
+
+### `unregister_code(<kc>);`
+
+Parallel to `register_code` function, this sends the `<kc>` keyup event to the computer. If you don't use this, the key will be held down until it's sent.
+
+### `clear_keyboard();`
+
+This will clear all mods and keys currently pressed.
+
+### `clear_mods();`
+
+This will clear all mods currently pressed.
+
+### `clear_keyboard_but_mods();`
+
+This will clear all keys besides the mods currently pressed.
+
+## Advanced Example: Single-key copy/paste
+
+This example defines a macro which sends `Ctrl-C` when pressed down, and `Ctrl-V` when released. 
+
+```c
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	switch(id) {
+		case 0: {
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), T(C), U(LCTL), END  );
+			} else {
+				return MACRO( D(LCTL), T(V), U(LCTL), END  );
+			}
+			break;
+		}
+	}
+	return MACRO_NONE;
+};
+```
+
+

docs/feature_mouse_keys.md

@@ -0,0 +1,81 @@
+# Mousekeys
+
+
+Mousekeys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer around, click up to 5 buttons, and even scroll in all 4 directions. QMK uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
+
+## Adding Mousekeys To a Keymap
+
+There are two steps to adding Mousekeys support to your keyboard. You must enable support in the Makefile and you must map mouse actions to keys on your keyboard.
+
+### Adding Mousekeys support in the `Makefile`
+
+To add support for Mousekeys you simply need to add a single line to your keymap's `Makefile`:
+
+```
+MOUSEKEY_ENABLE = yes
+```
+
+You can see an example here: https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/keymaps/mouse_keys/Makefile
+
+### Mapping Mouse Actions To Keyboard Keys
+
+You can use these keycodes within your keymap to map button presses to mouse actions:
+
+|Long Name|Short Name|Description|
+|---------|----------|-----------|
+|KC_MS_UP|KC_MS_U|Mouse Cursor Up|
+|KC_MS_DOWN|KC_MS_D|Mouse Cursor Down|
+|KC_MS_LEFT|KC_MS_L|Mouse Cursor Left|
+|KC_MS_RIGHT|KC_MS_R|Mouse Cursor Right|
+|KC_MS_BTN1|KC_BTN1|Mouse Button 1|
+|KC_MS_BTN2|KC_BTN2|Mouse Button 2|
+|KC_MS_BTN3|KC_BTN3|Mouse Button 3|
+|KC_MS_BTN4|KC_BTN4|Mouse Button 4|
+|KC_MS_BTN5|KC_BTN5|Mouse Button 5|
+|KC_MS_WH_UP|KC_WH_U|Mouse Wheel Up|
+|KC_MS_WH_DOWN|KC_WH_D|Mouse Wheel Down|
+|KC_MS_WH_LEFT|KC_WH_L|Mouse Wheel Left|
+|KC_MS_WH_RIGHT|KC_WH_R|Mouse Wheel Right|
+|KC_MS_ACCEL0|KC_ACL0|Set Mouse Acceleration Speed to 0|
+|KC_MS_ACCEL1|KC_ACL1|Set Mouse Acceleration Speed to 1|
+|KC_MS_ACCEL2|KC_ACL2|Set Mouse Acceleration Speed to 2|
+
+You can see an example in the `_ML` here: https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/keymaps/mouse_keys/keymap.c#L46
+
+## Configuring the behavior of Mousekeys
+
+The default speed for controlling the mouse with the keyboard is intentionaly slow. You can adjust these parameters by adding these settings to your keymap's `config.h` file. All times are specified in miliseconds (ms).
+
+```
+#define MOUSEKEY_DELAY             300
+#define MOUSEKEY_INTERVAL          50
+#define MOUSEKEY_MAX_SPEED         10
+#define MOUSEKEY_TIME_TO_MAX       20
+#define MOUSEKEY_WHEEL_MAX_SPEED   8
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 40
+```
+
+
+### `MOUSEKEY_DELAY`
+
+When one of the mouse movement buttons is pressed this setting is used to define the delay between that button press and the mouse cursor moving. Some people find that small movements are impossible if this setting is too low, while settings that are too high feel sluggish.
+
+### `MOUSEKEY_INTERVAL`
+
+When a movement key is held down this specifies how long to wait between each movement report. Lower settings will translate into an effectively higher mouse speed.
+
+### `MOUSEKEY_MAX_SPEED`
+
+As a movement key is held down the speed of the mouse cursor will increase until it reaches `MOUSEKEY_MAX_SPEED`.
+
+### `MOUSEKEY_TIME_TO_MAX`
+
+How long you want to hold down a movement key for until `MOUSEKEY_MAX_SPEED` is reached. This controls how quickly your cursor will accelerate.
+
+### `MOUSEKEY_WHEEL_MAX_SPEED`
+
+The top speed for scrolling movements.
+
+### `MOUSEKEY_WHEEL_TIME_TO_MAX`
+
+How long you want to hold down a scroll key for until `MOUSEKEY_WHEEL_MAX_SPEED` is reached. This controls how quickling your scrolling will accelerate.

docs/feature_pointing_device.md

@@ -0,0 +1,47 @@
+## Pointing Device
+
+Pointing Device is a generic name for a feature intended to be generic: moving the system pointer arround.  There are certainly other options for it - like mousekeys - but this aims to be easily modifiable and lightweight.  You can implement custom keys to control functionality, or you can gather information from other peripherals and insert it directly here - let QMK handle the processing for you.
+
+To enable Pointing Device, uncomment the following line in your rules.mk:
+
+```
+POINTING_DEVICE_ENABLE = yes
+```
+
+To manipulate the mouse report, you can use the following functions:
+
+* `pointing_device_get_report()` - Returns the current report_mouse_t that represents the information sent to the host computer
+* `pointing_device_set_report(report_mouse_t newMouseReport)` - Overrides and saves the report_mouse_t to be sent to the host computer
+
+Keep in mind that a report_mouse_t (here "mouseReport") has the following properties:
+
+* `mouseReport.x` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing movement (+ to the right, - to the left) on the x axis.
+* `mouseReport.y` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing movement (+ upward, - downward) on the y axis.
+* `mouseReport.v` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing vertical scrolling (+ upward, - downward).
+* `mouseReport.h` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing horizontal scrolling (+ right, - left).
+* `mouseReport.buttons` - this is a uint8_t in which the last 5 bits are used.  These bits represent the mouse button state - bit 3 is mouse button 5, and bit 7 is mouse button 1.
+
+When the mouse report is sent, the x, y, v, and h values are set to 0 (this is done in "pointing_device_send()", which can be overridden to avoid this behavior).  This way, button states persist, but movement will only occur once.  For further customization, both `pointing_device_init` and `pointing_device_task` can be overridden.
+
+In the following example, a custom key is used to click the mouse and scroll 127 units vertically and horizontally, then undo all of that when released - because that's a totally useful function.  Listen, this is an example:
+
+```
+case MS_SPECIAL:
+	report_mouse_t currentReport = pointing_device_get_report();
+    if (record->event.pressed)
+    {
+        currentReport.v = 127;
+		currentReport.h = 127;
+		currentReport.buttons |= MOUSE_BTN1; //this is defined in report.h
+    }
+    else
+    {
+        currentReport.v = -127;
+        currentReport.h = -127;
+        currentReport.buttons &= ~MOUSE_BTN1;
+    }
+	pointing_device_set_report(currentReport);
+    break;
+```
+
+Recall that the mouse report is set to zero (except the buttons) whenever it is sent, so the scrolling would only occur once in each case.

docs/feature_ps2_mouse.md

@@ -0,0 +1,258 @@
+## PS/2 Mouse Support
+
+Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device.
+
+To hook up a Trackpoint, you need to obtain a Trackpoint module (i.e. harvest from a Thinkpad keyboard), identify the function of each pin of the module, and make the necessary circuitry between controller and Trackpoint module. For more information, please refer to [Trackpoint Hardware](https://deskthority.net/wiki/TrackPoint_Hardware) page on Deskthority Wiki.
+
+There are three available modes for hooking up PS/2 devices: USART (best), interrupts (better) or busywait (not recommended).
+
+### Busywait version
+
+Note: This is not recommended, you may encounter jerky movement or unsent inputs. Please use interrupt or USART version if possible.
+
+In rules.mk:
+
+```
+PS2_MOUSE_ENABLE = yes
+PS2_USE_BUSYWAIT = yes
+```
+
+In your keyboard config.h:
+
+```
+#ifdef PS2_USE_BUSYWAIT
+#   define PS2_CLOCK_PORT  PORTD
+#   define PS2_CLOCK_PIN   PIND
+#   define PS2_CLOCK_DDR   DDRD
+#   define PS2_CLOCK_BIT   1
+#   define PS2_DATA_PORT   PORTD
+#   define PS2_DATA_PIN    PIND
+#   define PS2_DATA_DDR    DDRD
+#   define PS2_DATA_BIT    2
+#endif
+```
+
+### Interrupt version
+
+The following example uses D2 for clock and D5 for data. You can use any INT or PCINT pin for clock, and any pin for data.
+
+In rules.mk:
+
+```
+PS2_MOUSE_ENABLE = yes
+PS2_USE_INT = yes
+```
+
+In your keyboard config.h:
+
+```
+#ifdef PS2_USE_INT
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   2
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    5
+
+#define PS2_INT_INIT()  do {    \
+    EICRA |= ((1<<ISC21) |      \
+              (0<<ISC20));      \
+} while (0)
+#define PS2_INT_ON()  do {      \
+    EIMSK |= (1<<INT2);         \
+} while (0)
+#define PS2_INT_OFF() do {      \
+    EIMSK &= ~(1<<INT2);        \
+} while (0)
+#define PS2_INT_VECT   INT2_vect
+#endif
+```
+
+### USART version
+
+To use USART on the ATMega32u4, you have to use PD5 for clock and PD2 for data. If one of those are unavailable, you need to use interrupt version.
+
+In rules.mk:
+
+```
+PS2_MOUSE_ENABLE = yes
+PS2_USE_USART = yes
+```
+
+In your keyboard config.h:
+
+```
+#ifdef PS2_USE_USART
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   5
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    2
+
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
+#define PS2_USART_INIT() do {   \
+    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
+    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
+    UCSR1C = ((1 << UMSEL10) |  \
+              (3 << UPM10)   |  \
+              (0 << USBS1)   |  \
+              (3 << UCSZ10)  |  \
+              (0 << UCPOL1));   \
+    UCSR1A = 0;                 \
+    UBRR1H = 0;                 \
+    UBRR1L = 0;                 \
+} while (0)
+#define PS2_USART_RX_INT_ON() do {  \
+    UCSR1B = ((1 << RXCIE1) |       \
+              (1 << RXEN1));        \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+    UCSR1B = (1 << RXEN1);          \
+} while (0)
+#define PS2_USART_OFF() do {    \
+    UCSR1C = 0;                 \
+    UCSR1B &= ~((1 << RXEN1) |  \
+                (1 << TXEN1));  \
+} while (0)
+#define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
+#define PS2_USART_RX_DATA       UDR1
+#define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+#define PS2_USART_RX_VECT       USART1_RX_vect
+#endif
+```
+
+### Additional Settings
+
+#### PS/2 mouse features
+
+These enable settings supported by the PS/2 mouse protocol: http://www.computer-engineering.org/ps2mouse/
+
+```
+/* Use remote mode instead of the default stream mode (see link) */
+#define PS2_MOUSE_USE_REMOTE_MODE  
+
+/* Enable the scrollwheel or scroll gesture on your mouse or touchpad */
+#define PS2_MOUSE_ENABLE_SCROLLING
+
+/* Some mice will need a scroll mask to be configured. The default is 0xFF. */
+#define PS2_MOUSE_SCROLL_MASK 0x0F
+
+/* Applies a transformation to the movement before sending to the host (see link) */
+#define PS2_MOUSE_USE_2_1_SCALING
+
+/* The time to wait after initializing the ps2 host */
+#define PS2_MOUSE_INIT_DELAY 1000 /* Default */
+```
+
+You can also call the following functions from ps2_mouse.h
+
+```
+void ps2_mouse_disable_data_reporting(void);
+
+void ps2_mouse_enable_data_reporting(void);
+
+void ps2_mouse_set_remote_mode(void);
+
+void ps2_mouse_set_stream_mode(void);
+
+void ps2_mouse_set_scaling_2_1(void);
+
+void ps2_mouse_set_scaling_1_1(void);
+
+void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution);
+
+void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate);
+```
+
+#### Fine control
+
+Use the following defines to change the sensitivity and speed of the mouse.
+Note: you can also use `ps2_mouse_set_resolution` for the same effect (not supported on most touchpads).
+
+```
+#define PS2_MOUSE_X_MULTIPLIER 3
+#define PS2_MOUSE_Y_MULTIPLIER 3
+#define PS2_MOUSE_V_MULTIPLIER 1
+```
+
+#### Scroll button
+
+If you're using a trackpoint, you will likely want to be able to use it for scrolling.
+Its possible to enable a "scroll button/s" that when pressed will cause the mouse to scroll instead of moving.
+To enable the feature, you must set a scroll button mask as follows:
+
+```
+#define PS2_MOUSE_SCROLL_BTN_MASK (1<<PS2_MOUSE_BUTTON_MIDDLE) /* Default */
+```
+
+To disable the scroll button feature:
+
+```
+#define PS2_MOUSE_SCROLL_BTN_MASK 0
+```
+
+The available buttons are:
+
+```
+#define PS2_MOUSE_BTN_LEFT      0
+#define PS2_MOUSE_BTN_RIGHT     1
+#define PS2_MOUSE_BTN_MIDDLE    2
+```
+
+You can also combine buttons in the mask by `|`ing them together.
+
+Once you've configured your scroll button mask, you must configure the scroll button send interval.
+This is the interval before which if the scroll buttons were released they would be sent to the host.
+After this interval, they will cause the mouse to scroll and will not be sent.
+
+```
+#define PS2_MOUSE_SCROLL_BTN_SEND 300 /* Default */
+```
+
+To disable sending the scroll buttons:
+```
+#define PS2_MOUSE_SCROLL_BTN_SEND 0
+```
+
+Fine control over the scrolling is supported with the following defines:
+
+```
+#define PS2_MOUSE_SCROLL_DIVISOR_H 2
+#define PS2_MOUSE_SCROLL_DIVISOR_V 2
+```
+
+#### Invert mouse and scroll axes
+
+To invert the X and Y axes you can put:
+
+```
+#define PS2_MOUSE_INVERT_X
+#define PS2_MOUSE_INVERT_Y
+```
+
+into config.h.
+
+To reverse the scroll axes you can put:
+
+```
+#define PS2_MOUSE_INVERT_H
+#define PS2_MOUSE_INVERT_V
+```
+
+into config.h.
+
+#### Debug settings
+
+To debug the mouse, add `debug_mouse = true` or enable via bootmagic.
+
+```
+/* To debug the mouse reports */
+#define PS2_MOUSE_DEBUG_HID
+#define PS2_MOUSE_DEBUG_RAW
+```

docs/feature_rgblight.md

@@ -0,0 +1,124 @@
+# RGB Lighting
+
+If you've installed addressable RGB lights on your keyboard you can control them with QMK. Currently we support the following addressable LEDs on Atmel AVR processors:
+
+* WS2811 and variants (WS2812, WS2812B, WS2812C, etc)
+* SK6812RGBW
+
+Some keyboards come with RGB LEDs pre-installed. Others have to have LEDs installed after the fact. See below for information on modifying your keyboard.
+
+## Selecting Colors
+
+QMK uses Hue, Saturation, and Value to set color rather than using RGB. You can use the color wheel below to see how this works. Changing the Hue will cycle around the circle. Saturation will affect the intensity of the color, which you can see as you move from the inner part to the outer part of the wheel. Value sets the overall brightness.
+
+<img src="gitbook/images/color-wheel.svg" alt="HSV Color Wheel" width="250">
+
+If you would like to learn more about HSV you can start with the [Wikipedia article](https://en.wikipedia.org/wiki/HSL_and_HSV).
+
+## Configuration
+
+Before RGB Lighting can be used you have to enable it in `rules.mk`:
+
+    RGBLIGHT_ENABLE = yes
+
+You can configure the behavior of the RGB lighting by defining values inside `config.h`.
+
+### Required Configuration
+
+At minimum you have to define the pin your LED strip is connected to and the number of LEDs connected.
+
+```c
+#define RGB_DI_PIN D7     // The pin the LED strip is connected to
+#define RGBLED_NUM 14     // Number of LEDs in your strip
+```
+
+### Optional Configuration
+
+You can change the behavior of the RGB Lighting by setting these configuration values. Use `#define <Option> <Value>` in a `config.h` at the keyboard, revision, or keymap level.
+
+| Option | Default Value | Description |
+|--------|---------------|-------------|
+| `RGBLIGHT_HUE_STEP` | 10 | How many hues you want to have available. |
+| `RGBLIGHT_SAT_STEP` | 17 | How many steps of saturation you'd like. |
+| `RGBLIGHT_VAL_STEP` | 17 | The number of levels of brightness you want. |
+
+### Animations
+
+If you have `#define RGBLIGHT_ANIMATIONS` in your `config.h` you will have a number of animation modes you can cycle through using the `RGB_MOD` key. You can also `#define` other options to tweak certain animations.
+
+| Option | Default Value | Description |
+|--------|---------------|-------------|
+| `RGBLIGHT_ANIMATIONS` | | `#define` this to enable animation modes. |
+| `RGBLIGHT_EFFECT_BREATHE_CENTER` | 1.85 | Used to calculate the curve for the breathing animation. Valid values 1.0-2.7. |
+| `RGBLIGHT_EFFECT_BREATHE_MAX` | 255 | The maximum brightness for the breathing mode. Valid values 1-255. |
+| `RGBLIGHT_EFFECT_SNAKE_LENGTH` | 4 | The number of LEDs to light up for the "snake" animation. |
+| `RGBLIGHT_EFFECT_KNIGHT_LENGTH` | 3 | The number of LEDs to light up for the "knight" animation. |
+| `RGBLIGHT_EFFECT_KNIGHT_OFFSET` | 0 | Start the knight animation this many LEDs from the start of the strip. |
+| `RGBLIGHT_EFFECT_KNIGHT_LED_NUM` | RGBLED_NUM | The number of LEDs to have the "knight" animation travel. |
+| `RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL` | 1000 | How long to wait between light changes for the "christmas" animation. Specified in ms. |
+| `RGBLIGHT_EFFECT_CHRISTMAS_STEP` | 2 | How many LED's to group the red/green colors by for the christmas mode. |
+
+You can also tweak the behavior of the animations by defining these consts in your `keymap.c`. These mostly affect the speed different modes animate at.
+
+```c
+// How long (in ms) to wait between animation steps for the breathing mode
+const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
+
+// How long (in ms) to wait between animation steps for the rainbow mode
+const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30};
+
+// How long (in ms) to wait between animation steps for the swirl mode
+const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20};
+
+// How long (in ms) to wait between animation steps for the snake mode
+const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
+
+// How long (in ms) to wait between animation steps for the knight modes
+const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
+
+// These control which colors are selected for the gradient mode
+const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
+```
+
+## RGB Lighting Keycodes
+
+These control the RGB Lighting functionality.
+
+| Long Name | Short Name | Description |
+|-----------|------------|-------------|
+||`RGB_TOG`|toggle on/off|
+||`RGB_MOD`|cycle through modes|
+||`RGB_SMOD`|cycle through modes, use reverse direction when shift is hold|
+||`RGB_HUI`|hue increase|
+||`RGB_HUD`|hue decrease|
+||`RGB_SAI`|saturation increase|
+||`RGB_SAD`|saturation decrease|
+||`RGB_VAI`|value (brightness) increase|
+||`RGB_VAD`|value (brightness) decrease|
+|`RGB_MODE_PLAIN`|`RGB_M_P `| Switch to the static no animation mode |
+|`RGB_MODE_BREATHE`|`RGB_M_B`| Switch to the breathing mode |
+|`RGB_MODE_RAINBOW`|`RGB_M_R`| Switch to the rainbow mode ||
+|`RGB_MODE_SWIRL`|`RGB_M_SW`| Switch to the swirl mode |
+|`RGB_MODE_SNAKE`|`RGB_M_SN`| Switch to the snake mode |
+|`RGB_MODE_KNIGHT`|`RGB_M_K`| Switch to the knight animation |
+|`RGB_MODE_XMAS`|`RGB_M_X`| Switch to the Christmas animation |
+|`RGB_MODE_GRADIENT`|`RGB_M_G`| Switch to the static gradient mode |
+
+## Hardware Modification
+
+![Planck with RGB Underglow](https://raw.githubusercontent.com/qmk/qmk_firmware/master/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg)
+
+Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY).
+
+For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring the VCC, GND, and DI, you can enable the underglow in your Makefile.
+
+    RGBLIGHT_ENABLE = yes
+
+In order to use the underglow animation functions, you need to have `#define RGBLIGHT_ANIMATIONS` in your `config.h`.
+
+Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default:
+
+    #define RGB_DI_PIN F4     // The pin your RGB strip is wired to
+    #define RGBLED_NUM 14     // Number of LEDs
+
+You'll need to edit `RGB_DI_PIN` to the pin you have your `DI` on your RGB strip wired to.

docs/feature_stenography.md

@@ -0,0 +1,108 @@
+# Stenography in QMK
+
+[Stenography](https://en.wikipedia.org/wiki/Stenotype) is a method of writing most often used by court reports, closed-captioning, and real-time transcription for the deaf. In stenography words are chorded syllable by syllable with a mixture of spelling, phonetic, and shortcut (briefs) strokes. Professional stenographers can reach 200-300 WPM without any of the strain usually found in standard typing and with far fewer errors (>99.9% accuracy).
+
+The [Open Steno Project](http://www.openstenoproject.org/) has built an open-source program called Plover that provides real-time translation of steno strokes into words and commands. It has an established dictionary and supports
+
+## Plover with QWERTY Keyboard
+
+Plover can work with any standard QWERTY keyboard, although it is more efficient if the keyboard supports NKRO (n-key rollover) to allow Plover to see all the pressed keys at once. An example keymap for Plover can be found in `planck/keymaps/default`. Switching to the `PLOVER` layer adjusts the position of the keyboard to support the number bar.
+
+To use Plover with QMK just enable NKRO and optionally adjust your layout if you have anything other than a standard layout. You may also want to purchase some steno-friendly keycaps to make it easier to hit multiple keys.
+
+## Plover with Steno Protocol
+
+Plover also understands the language of several steno machines. QMK can speak a couple of these languages, TX Bolt and GeminiPR. An example layout can be found in `planck/keymaps/steno`.
+
+When QMK speaks to Plover over a steno protocol Plover will not use the keyboard as input. This means that you can switch back and forth between a standard keyboard and your steno keyboard, or even switch layers from Plover to standard and back without needing to activate/deactive Plover.
+
+In this mode Plover expects to speak with a steno machine over a serial port so QMK will present itself to the operating system as a virtual serial port in addition to a keyboard. By default QMK will speak the TX Bolt protocol but can be switched to GeminiPR; the last protocol used is stored in non-volatile memory so QMK will use the same protocol on restart.
+
+> Note: Due to hardware limitations you may not be able to run both a virtual serial port and mouse emulation at the same time.
+
+### TX Bolt
+
+TX Bolt communicates the status of 24 keys over a very simple protocol in variable-sized (1-5 byte) packets.
+
+### GeminiPR
+
+GeminiPR encodes 42 keys into a 6-byte packet. While TX Bolt contains everything that is necessary for standard stenography, GeminiPR opens up many more options, including supporting non-English theories.
+
+## Configuring QMK for Steno
+
+Firstly, enable steno in your keymap's Makefile. You may also need disable mousekeys, extra keys, or another USB endpoint to prevent conflicts. The builtin USB stack for some processors only supports a certain number of USB endpoints and the virtual serial port needed for steno fills 3 of them.
+
+```Makefile
+STENO_ENABLE = yes
+MOUSEKEY_ENABLE = no
+```
+
+In your keymap create a new layer for Plover. You will need to include `keymap_steno.h`. See `planck/keymaps/steno/keymap.c` for an example. Remember to create a key to switch to the layer as well as a key for exiting the layer. If you would like to switch modes on the fly you can use the keycodes `QK_STENO_BOLT` and `QK_STENO_GEMINI`. If you only want to use one of the protocols you may set it up in your initialization function:
+
+```C
+void matrix_init_user() {
+  steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT
+}
+```
+
+Once you have your keyboard flashed launch Plover. Click the 'Configure...' button. In the 'Machine' tab select the Stenotype Machine that corresponds to your desired protocol. Click the 'Configure...' button on this tab and enter the serial port or click 'Scan'. Baud rate is fine at 9600 (although you should be able to set as high as 115200 with no issues). Use the default settings for everything else (Data Bits: 8, Stop Bits: 1, Parity: N, no flow control).
+
+On the display tab click 'Open stroke display'. With Plover disabled you should be able to hit keys on your keyboard and see them show up in the stroke display window. Use this to make sure you have set up your keymap correctly. You are now ready to steno!
+
+## Learning Stenography
+
+* [Learn Plover!](https://sites.google.com/site/ploverdoc/)
+* [QWERTY Steno](http://qwertysteno.com/Home/)
+* [Steno Jig](https://joshuagrams.github.io/steno-jig/)
+* More resources at the Plover [Learning Stenography](https://github.com/openstenoproject/plover/wiki/Learning-Stenography) wiki
+
+## Keycode Reference
+
+As defined in `keymap_steno.h`.
+
+> Note: TX Bolt does not support the full set of keys. The TX Bolt implementation in QMK will map the GeminiPR keys to the nearest TX Bolt key so that one key map will work for both.
+
+|GeminiPR|TX Bolt|Steno Key|
+|--------|-------|-----------|
+|`STN_N1`|`STN_NUM`|Number bar #1|
+|`STN_N2`|`STN_NUM`|Number bar #2|
+|`STN_N3`|`STN_NUM`|Number bar #3|
+|`STN_N4`|`STN_NUM`|Number bar #4|
+|`STN_N5`|`STN_NUM`|Number bar #5|
+|`STN_N6`|`STN_NUM`|Number bar #6|
+|`STN_N7`|`STN_NUM`|Number bar #7|
+|`STN_N8`|`STN_NUM`|Number bar #8|
+|`STN_N9`|`STN_NUM`|Number bar #9|
+|`STN_NA`|`STN_NUM`|Number bar #A|
+|`STN_NB`|`STN_NUM`|Number bar #B|
+|`STN_NC`|`STN_NUM`|Number bar #C|
+|`STN_S1`|`STN_SL`| `S-` upper|
+|`STN_S2`|`STN_SL`| `S-` lower|
+|`STN_TL`|`STN_TL`| `T-`|
+|`STN_KL`|`STN_KL`| `K-`|
+|`STN_PL`|`STN_PL`| `P-`|
+|`STN_WL`|`STN_WL`| `W-`|
+|`STN_HL`|`STN_HL`| `H-`|
+|`STN_RL`|`STN_RL`| `R-`|
+|`STN_A`|`STN_A`| `A` vowel|
+|`STN_O`|`STN_O`| `O` vowel|
+|`STN_ST1`|`STN_STR`| `*` upper-left |
+|`STN_ST2`|`STN_STR`| `*` lower-left|
+|`STN_ST3`|`STN_STR`| `*` upper-right|
+|`STN_ST4`|`STN_STR`| `*` lower-right|
+|`STN_E`|`STN_E`| `E` vowel|
+|`STN_U`|`STN_U`| `U` vowel|
+|`STN_FR`|`STN_FR`| `-F`|
+|`STN_PR`|`STN_PR`| `-P`|
+|`STN_RR`|`STN_RR`| `-R`|
+|`STN_BR`|`STN_BR`| `-B`|
+|`STN_LR`|`STN_LR`| `-L`|
+|`STN_GR`|`STN_GR`| `-G`|
+|`STN_TR`|`STN_TR`| `-T`|
+|`STN_SR`|`STN_SR`| `-S`|
+|`STN_DR`|`STN_DR`| `-D`|
+|`STN_ZR`|`STN_ZR`| `-Z`|
+|`STN_FN`|| (GeminiPR only)|
+|`STN_RES1`||(GeminiPR only)|
+|`STN_RES2`||(GeminiPR only)|
+|`STN_PWR`||(GeminiPR only)|

docs/feature_tap_dance.md

@@ -0,0 +1,250 @@
+# Tap Dance: A single key can do 3, 5, or 100 different things
+
+<!-- FIXME: Break this up into multiple sections -->
+
+Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. It's one of the nicest community-contributed features in the firmware, conceived and created by [algernon](https://github.com/algernon) in [#451](https://github.com/qmk/qmk_firmware/pull/451). Here's how algernon describes the feature:
+
+With this feature one can specify keys that behave differently, based on the amount of times they have been tapped, and when interrupted, they get handled before the interrupter.
+
+To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets explore a certain setup! We want one key to send `Space` on single tap, but `Enter` on double-tap.
+
+With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be send first. Thus, `SPC a` will result in `a SPC` being sent, if they are typed within `TAPPING_TERM`. With the tap dance feature, that'll come out as `SPC a`, correctly.
+
+The implementation hooks into two parts of the system, to achieve this: into `process_record_quantum()`, and the matrix scan. We need the latter to be able to time out a tap sequence even when a key is not being pressed, so `SPC` alone will time out and register after `TAPPING_TERM` time.
+
+But lets start with how to use it, first!
+
+First, you will need `TAP_DANCE_ENABLE=yes` in your `rules.mk`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array.
+
+This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are three possible options:
+
+* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held.
+* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
+* `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function on when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
+
+The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
+
+And that's the bulk of it!
+
+And now, on to the explanation of how it works!
+
+The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and the timer.
+
+This means that you have `TAPPING_TERM` time to tap the key again, you do not have to input all the taps within that timeframe. This allows for longer tap counts, with minimal impact on responsiveness.
+
+Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of tap-dance keys.
+
+For the sake of flexibility, tap-dance actions can be either a pair of keycodes, or a user function. The latter allows one to handle higher tap counts, or do extra things, like blink the LEDs, fiddle with the backlighting, and so on. This is accomplished by using an union, and some clever macros.
+
+# Examples
+
+## Simple Example
+
+Here's a simple example for a single definition:
+
+1. In your `rules.mk`, add `TAP_DANCE_ENABLE = yes`
+2. In your `config.h` (which you can copy from `qmk_firmware/keyboards/planck/config.h` to your keymap directory), add `#define TAPPING_TERM 200`
+3. In your `keymap.c` file, define the variables and definitions, then add to your keymap:
+
+```c
+//Tap Dance Declarations
+enum {
+  TD_ESC_CAPS = 0
+};
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  //Tap once for Esc, twice for Caps Lock
+  [TD_ESC_CAPS]  = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_CAPS)
+// Other declarations would go here, separated by commas, if you have them
+};
+
+//In Layer declaration, add tap dance item in place of a key code
+TD(TD_ESC_CAPS)
+```
+
+## Complex Examples
+
+This section details several complex tap dance examples.
+All the enums used in the examples are declared like this:
+
+```c
+// Enums defined for all examples:
+enum {
+ CT_SE = 0,
+ CT_CLN,
+ CT_EGG,
+ CT_FLSH,
+ X_TAP_DANCE
+};
+```
+### Example 1: Send `:` on single tap, `;` on double tap
+```c
+void dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    register_code (KC_RSFT);
+    register_code (KC_SCLN);
+  } else {
+    register_code (KC_SCLN);
+  }
+}
+
+void dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    unregister_code (KC_RSFT);
+    unregister_code (KC_SCLN);
+  } else {
+    unregister_code (KC_SCLN);
+  }
+}
+
+//All tap dance functions would go here. Only showing this one.
+qk_tap_dance_action_t tap_dance_actions[] = {
+ [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_cln_finished, dance_cln_reset)
+};
+```
+### Example 2: Send "Safety Dance!" after 100 taps
+```c
+void dance_egg (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count >= 100) {
+    SEND_STRING ("Safety dance!");
+    reset_tap_dance (state);
+  }
+}
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+ [CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
+};
+```
+
+### Example 3: Turn LED lights on then off, one at a time
+
+```c
+// on each tap, light up one led, from right to left
+// on the forth tap, turn them off from right to left
+void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) {
+  switch (state->count) {
+  case 1:
+    ergodox_right_led_3_on();
+    break;
+  case 2:
+    ergodox_right_led_2_on();
+    break;
+  case 3:
+    ergodox_right_led_1_on();
+    break;
+  case 4:
+    ergodox_right_led_3_off();
+    _delay_ms(50);
+    ergodox_right_led_2_off();
+    _delay_ms(50);
+    ergodox_right_led_1_off();
+  }
+}
+
+// on the fourth tap, set the keyboard on flash state
+void dance_flsh_finished(qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count >= 4) {
+    reset_keyboard();
+    reset_tap_dance(state);
+  }
+}
+
+// if the flash state didnt happen, then turn off leds, left to right
+void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) {
+  ergodox_right_led_1_off();
+  _delay_ms(50);
+  ergodox_right_led_2_off();
+  _delay_ms(50);
+  ergodox_right_led_3_off();
+}
+
+//All tap dances now put together. Example 3 is "CT_FLASH"
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [CT_SE]  = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
+ ,[CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_cln_finished, dance_cln_reset)
+ ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
+ ,[CT_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED (dance_flsh_each, dance_flsh_finished, dance_flsh_reset)
+};
+```
+
+### Example 4: 'Quad Function Tap-Dance'
+
+By [DanielGGordon](https://github.com/danielggordon)
+
+Allow one key to have 4 (or more) functions, depending on number of presses, and if the key is held or tapped.
+Below is a specific example:
+*  Tap = Send `x`
+*  Hold = Send `Control`
+*  Double Tap = Send `Escape`
+*  Double Tap and Hold = Send `Alt`
+
+The following example can be easily expanded to more than 4 quite easily:
+```c
+//**************** Definitions needed for quad function to work *********************//
+//Enums used to clearly convey the state of the tap dance
+enum {
+  SINGLE_TAP = 1,
+  SINGLE_HOLD = 2,
+  DOUBLE_TAP = 3,
+  DOUBLE_HOLD = 4, 
+  DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP
+  // Add more enums here if you want for triple, quadruple, etc. 
+};
+
+typedef struct {
+  bool is_press_action;
+  int state;
+} tap;
+
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    //If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP
+    if (state->interrupted || state->pressed==0) return SINGLE_TAP;
+    else return SINGLE_HOLD;
+  }
+  //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated
+  //with single tap. In example below, that means to send `xx` instead of `Escape`.
+  else if (state->count == 2) {
+    if (state->interrupted) return DOUBLE_SINGLE_TAP;
+    else if (state->pressed) return DOUBLE_HOLD;
+    else return DOUBLE_TAP;
+  } 
+  else return 6; //magic number. At some point this method will expand to work for more presses
+}
+
+//**************** Definitions needed for quad function to work *********************//
+
+//instanalize an instance of 'tap' for the 'x' tap dance.
+static tap xtap_state = { 
+  .is_press_action = true,
+  .state = 0
+};
+
+void x_finished (qk_tap_dance_state_t *state, void *user_data) {
+  xtap_state.state = cur_dance(state);
+  switch (xtap_state.state) {
+    case SINGLE_TAP: register_code(KC_X); break;
+    case SINGLE_HOLD: register_code(KC_LCTRL); break;
+    case DOUBLE_TAP: register_code(KC_ESC); break;
+    case DOUBLE_HOLD: register_code(KC_LALT); break;
+    case DOUBLE_SINGLE_TAP: register_code(KC_X); unregister_code(KC_X); register_code(KC_X);
+    //Last case is for fast typing. Assuming your key is `f`:
+    //For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`.
+    //In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms.
+  }
+}
+
+void x_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (xtap_state.state) {
+    case SINGLE_TAP: unregister_code(KC_X); break;
+    case SINGLE_HOLD: unregister_code(KC_LCTRL); break;
+    case DOUBLE_TAP: unregister_code(KC_ESC); break;
+    case DOUBLE_HOLD: unregister_code(KC_LALT);
+    case DOUBLE_SINGLE_TAP: unregister_code(KC_X);
+  }
+  xtap_state.state = 0;
+}
+```
+And then simply add this to your list of tap dance functions:
+`[X_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, x_finished, x_reset)`

docs/feature_terminal.md

@@ -0,0 +1,80 @@
+# Terminal
+
+> This feature is currently *huge* at 4400 bytes, and should probably only be put on boards with a lot of memory, or for fun.
+
+The terminal feature is a command-line-like interface designed to communicate through a text editor with keystrokes. It's beneficial to turn off auto-indent features in your editor.
+
+To enable, stick this in your `rules.mk` or `Makefile`:
+
+    TERMINAL_ENABLE = yes
+
+And use the `TERM_ON` and `TERM_OFF` keycodes to turn it on or off.
+
+When enabled, a `> ` prompt will appear, where you'll be able to type, backspace (a bell will ding if you reach the beginning and audio is enabled), and hit enter to send the command. Arrow keys are currently disabled so it doesn't get confused. Moving your cursor around with the mouse is discouraged.
+
+`#define TERMINAL_HELP` enables some other output helpers that aren't really needed with this page.
+
+## Future ideas
+
+* Keyboard/user-extendable commands
+* Smaller footprint
+* Arrow key support
+* Command history
+* SD card support
+* LCD support for buffer display
+* Keycode -> name string LUT
+* Layer status
+* *Analog/digital port read/write*
+* RGB mode stuff
+* Macro definitions
+* EEPROM read/write
+* Audio control
+
+## Current commands
+
+### `about`
+
+Prints out the current version of QMK with a build date:
+
+```
+> about
+QMK Firmware
+  v0.5.115-7-g80ed73-dirty
+  Built: 2017-08-29-20:24:44
+```
+
+### `help`
+
+Prints out the available commands:
+
+```
+> help
+commands available:
+  about help keycode keymap exit
+```
+
+### `keycode <layer> <row> <col>`
+
+Prints out the keycode value of a certain layer, row, and column:
+
+```
+> keycode 0 1 0
+0x29 (41)
+```
+
+### `keymap <layer>`
+
+Prints out the entire keymap for a certain layer
+
+```
+> keymap 0
+0x002b, 0x0014, 0x001a, 0x0008, 0x0015, 0x0017, 0x001c, 0x0018, 0x000c, 0x0012, 0x0013, 0x002a, 
+0x0029, 0x0004, 0x0016, 0x0007, 0x0009, 0x000a, 0x000b, 0x000d, 0x000e, 0x000f, 0x0033, 0x0034, 
+0x00e1, 0x001d, 0x001b, 0x0006, 0x0019, 0x0005, 0x0011, 0x0010, 0x0036, 0x0037, 0x0038, 0x0028, 
+0x5cd6, 0x00e0, 0x00e2, 0x00e3, 0x5cd4, 0x002c, 0x002c, 0x5cd5, 0x0050, 0x0051, 0x0052, 0x004f,
+> 
+```
+
+### `exit`
+
+Exits the terminal - same as `TERM_OFF`.

docs/feature_thermal_printer.md

@@ -0,0 +1,10 @@
+# Thermal Printer
+
+<!-- FIXME: Describe thermal printers support here. -->
+
+## Thermal Printer Keycodes
+
+|Name|Description|
+|----|-----------|
+|`PRINT_ON`|Start printing everything the user types|
+|`PRINT_OFF`|Stop printing everything the user types|

docs/feature_unicode.md

@@ -0,0 +1,55 @@
+# Unicode support
+
+There are three Unicode keymap definition method available in QMK:
+
+## UNICODE_ENABLE
+
+Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in
+keymap file, where *n* is a 4 digit hexadecimal.
+
+## UNICODEMAP_ENABLE
+
+Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping
+table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file.
+The keycode function is `X(n)` where *n* is the array index of the mapping
+table.
+
+## UCIS_ENABLE
+
+TBD
+
+Unicode input in QMK works by inputing a sequence of characters to the OS,
+sort of like macro. Unfortunately, each OS has different ideas on how Unicode is inputted.
+
+This is the current list of Unicode input method in QMK:
+
+* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
+* UC_OSX_RALT: Same as UC_OSX, but sends the Rigt Alt key for unicode input
+* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
+* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
+* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
+
+# Additional language support
+
+In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware.
+
+# International Characters on Windows
+
+[AutoHotkey](https://autohotkey.com) allows Windows users to create custom hotkeys among others.
+
+The method does not require Unicode support in the keyboard itself but depends instead of AutoHotkey running in the background.
+
+First you need to select a modifier combination that is not in use by any of your programs.
+CtrlAltWin is not used very widely and should therefore be perfect for this.
+There is a macro defined for a mod-tab combo `LCAG_T`.
+Add this mod-tab combo to a key on your keyboard, e.g.: `LCAG_T(KC_TAB)`.
+This makes the key behave like a tab key if pressed and released immediately but changes it to the modifier if used with another key.
+
+In the default script of AutoHotkey you can define custom hotkeys.
+
+    <^<!<#a::Send, ä
+    <^<!<#<+a::Send, Ä
+
+The hotkeys above are for the combination CtrlAltGui and CtrlAltGuiShift plus the letter a.
+AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
+

docs/feature_userspace.md

@@ -0,0 +1,33 @@
+# Userspace: sharing code between keymaps
+
+If you use more than one keyboard with a similar keymap, you might see the benefit in being able to share code between them. Create your own folder in `users/` named the same as your keymap (ideally your github username, `<name>`) with the following structure:
+
+* `/users/<name>/` (added to the path automatically)
+  * `readme.md`
+  * `rules.mk` (included automatically)
+  * `<name>.h` (optional)
+  * `<name>.c` (optional)
+
+`<name>.c` will need to be added to the SRC in `rules.mk` like this:
+
+    SRC += <name>.c
+
+Additional files may be added in the same way - it's recommended you have one named `<name>`.c/.h though.
+
+All this only happens when you build a keymap named `<name>`, like this:
+
+    make planck:<name>
+
+For example, 
+
+    make planck:jack
+
+Will include the `/users/jack/` folder in the path, along with `/users/jack/rules.mk`.
+
+## Readme
+
+Please include authorship (your name, github username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
+
+## Example
+
+For a brief example, checkout `/users/_example/` until we have more reasonable and useful examples.