Merge pull request #1359 from agbell/PR

Permissive Hold, and two keymaps

Dockerfile

@@ -15,6 +15,8 @@ RUN apt-get update && apt-get install --no-install-recommends -y build-essential
     binutils-arm-none-eabi \
     libnewlib-arm-none-eabi \
     git \
+    software-properties-common \
+    avrdude \
     && rm -rf /var/lib/apt/lists/*
 
 ENV keyboard=ergodox
@@ -23,4 +25,4 @@ ENV keymap=default
 
 VOLUME /qmk
 WORKDIR /qmk
-CMD make clean ; make keyboard=${keyboard} subproject=${subproject} keymap=${keymap}
+CMD make clean; make;

docs/Keycodes.md

@@ -1,6 +1,6 @@
 # Overview
 
-When defining a [keymap](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap.md) each key needs a valid key definition.
+When defining a [keymap](Keymap.md) each key needs a valid key definition.
 
 This page documents the symbols that correspond to keycodes that are available to you in QMK.
 

keyboards/clueboard/keymaps/magicmonty/Makefile

@@ -0,0 +1,2 @@
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes

keyboards/clueboard/keymaps/magicmonty/keymap.c

@@ -0,0 +1,152 @@
+#include "clueboard.h"
+
+// Helpful defines
+#define GRAVE_MODS  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _ME 2
+#define _CL 3
+#define _ML 4
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: Base Layer (Default Layer)
+   */
+  [_BL] = KEYMAP(
+    F(0),    KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   _______, KC_BSPC,          KC_INS, \
+    KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,                   KC_DEL, \
+    MO(_FL), KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN,  KC_QUOT,  KC_NUHS,  KC_ENT,                            \
+    KC_LSFT, KC_NUBS, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,   KC_SLSH,  _______,  KC_RSFT,          KC_UP,           \
+    KC_LCTL, KC_LGUI, KC_LALT, _______,          LT(_ML, KC_SPC),LT(_ML, KC_SPC),      _______,  KC_RALT,  MO(_ME),  MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   */
+  [_FL] = KEYMAP(
+    KC_GRV,  KC_F1,   KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,   KC_F11,   KC_F12,   _______, _______,          BL_STEP, \
+    _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,_______, _______,  _______,  _______,  _______,                   _______, \
+    MO(_FL), _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,                            \
+    _______, _______, _______,_______,_______,_______,_______,_______,MO(_ME),_______, _______,  _______,  _______,  _______,          KC_PGUP,          \
+    _______, _______, _______,_______,        _______,_______,                         _______,  _______,  _______,  MO(_FL), KC_HOME, KC_PGDN, KC_END),
+
+  /* Keymap _ME: Media layer
+    */
+  [_ME] = KEYMAP(
+    _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______, KC_MUTE,         KC_VOLU, \
+    _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,                  KC_VOLD, \
+    _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,                           \
+    MO(_FL), _______, _______,_______,_______,_______,_______,_______,MO(_ME),_______, _______,  _______,  _______,  MO(_FL),          _______,         \
+    _______, _______, _______,_______,                _______,_______,                 _______,  _______,  _______,  _______, KC_MPRV, KC_MPLY,KC_MNXT),
+
+  /* Keymap _CL: Control layer
+    */
+  [_CL] = KEYMAP(
+    _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______, RGB_TOG,          RGB_VAI, \
+    _______, _______, _______,_______,RESET,  _______,_______,_______,_______,_______, _______,  _______,  _______,  _______,                   RGB_VAD, \
+    _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,                            \
+    MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  MO(_FL),          RGB_SAI,          \
+    _______, _______, _______,_______,        RGB_MOD,RGB_MOD,                         _______,  _______,  _______,  _______, RGB_HUD, RGB_SAD, RGB_HUI),
+
+  /* Keymap _ML: Mouse layer
+    */
+  [_ML] = KEYMAP(
+    _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______, _______,         _______, \
+    _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,                  _______, \
+    _______, _______, KC_BTN3,KC_BTN2,KC_BTN1,_______,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R, _______,  _______,  _______,  _______,                           \
+    _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,          KC_MS_U,         \
+    _______, _______, _______,_______,        LT(_ML, KC_SPC),LT(_ML, KC_SPC),         _______,  KC_BTN1,  KC_BTN2,  KC_BTN3, KC_MS_L, KC_MS_D,KC_MS_R),
+};
+
+/* This is a list of user defined functions. F(N) corresponds to item N
+   of this list.
+ */
+const uint16_t PROGMEM fn_actions[] = {
+  [0] = ACTION_FUNCTION(0),  // Calls action_function()
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t mods_pressed;
+  static bool mod_flag;
+
+  switch (id) {
+    case 0:
+      /* Handle the combined Grave/Esc key
+       */
+      mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
+      if (record->event.pressed) {
+        /* The key is being pressed.
+         */
+        if (mods_pressed) {
+          mod_flag = true;
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        /* The key is being released.
+         */
+        if (mod_flag) {
+          mod_flag = false;
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}
+
+enum layer_id {
+  LAYER_BASE,
+  LAYER_FUNCTION,
+  LAYER_MEDIA,
+  LAYER_CONTROL,
+  LAYER_MOUSE
+};
+
+void clueboard_set_led(uint8_t id) {
+  switch (id) {
+    case LAYER_BASE:
+      rgblight_sethsv(346, 0, 255);
+      break;
+    case LAYER_FUNCTION:
+      rgblight_sethsv(46, 255, 255);
+      break;
+    case LAYER_MEDIA:
+      rgblight_sethsv(86, 255, 255);
+      break;
+    case LAYER_CONTROL:
+      rgblight_sethsv(346, 255, 255);
+      break;
+    case LAYER_MOUSE:
+      rgblight_sethsv(206, 255, 255);
+      break;
+  }
+};
+
+void matrix_scan_user(void) {
+    uint32_t layer = layer_state;
+
+    if (layer & (1<<_FL)) {
+      if (layer & (1<<_ME)) {
+        clueboard_set_led(LAYER_MEDIA);
+      } else if (layer & (1<<_CL)) {
+        clueboard_set_led(LAYER_CONTROL);
+      } else {
+        clueboard_set_led(LAYER_FUNCTION);
+      }
+    } else if (layer & (1<<_ML)) {
+        clueboard_set_led(LAYER_MOUSE);
+    } else {
+        clueboard_set_led(LAYER_BASE);
+    }
+};

keyboards/clueboard/keymaps/magicmonty/readme.md

@@ -0,0 +1,32 @@
+```
+ ___     _____ _            _                         _     __    __ _   __
+|__ \   / ____| |          | |                       | |   / /   / /(_) / /
+ ||) | | |    | |_   _  ___| |__   ___   __ _ _ __ __| |  / /_  / /_   / /
+ |/ /  | |    | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_|   | |____| | |_| |  __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_)    \_____|_|\__,_|\___|_.__/ \___/ \__,_|_|  \__,_|  \___/ \___/_/ (_)
+```
+
+![Clueboard Layout Image](layout.png)
+
+# MouseKeys Layout
+
+This layout is a combination of the `mouse_keys` and the `win_optimized` layouts.
+This layout is optimized for an ISO layout.
+
+It adds a mouse layer. When you hold down the spacebar the arrow keys
+will move your mouse cursor. You can click using the 3 mods to the left of the
+arrow keys, or the 3 keys under your primary fingers on the home row.
+The Left, Down, Up and Right for the mouse movement are also VIM-Like on the HJKL keys
+
+The CapsLock is disabled and works as Function key.
+
+There is also a separate media layer with Volume/Play controls
+
+The different layers are signalled throug setting of the underlight:
+
+- Base layer: White
+- Function layer: Yellow
+- Media layer: Green
+- Mouse layer: Blue
+- Control layer: Red

keyboards/dk60/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/dk60/config.h

@@ -0,0 +1,55 @@
+/*
+Copyright 2017 Damien Broqua <contact@darkou.fr>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+    #define CONFIG_H
+
+    #include "config_common.h"
+
+    /* USB Device descriptor parameter */
+    #define VENDOR_ID       0xFEED
+    #define PRODUCT_ID      0x6060
+    #define DEVICE_VER      0x0003
+    #define MANUFACTURER    DARKOU
+    #define PRODUCT         DK60
+    #define DESCRIPTION     QMK keyboard firmware for DK60 support
+
+    /* key matrix size */
+    #define MATRIX_ROWS 5
+    #define MATRIX_COLS 13
+
+    // ROWS: Top to bottom, COLS: Left to right
+    #define MATRIX_ROW_PINS { B6, B4, D7, D6, D4 }
+    #define MATRIX_COL_PINS { B0, B3, B2, B1, D3, D5, B5, B7, C6, C7, D0, D1, D2 }
+    #define UNUSED_PINS
+
+    /* COL2ROW or ROW2COL */
+    #define DIODE_DIRECTION COL2ROW
+
+    /* Set 0 if debouncing isn't needed */
+    #define DEBOUNCING_DELAY 5
+
+    /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+    #define LOCKING_SUPPORT_ENABLE
+    /* Locking resynchronize hack */
+    #define LOCKING_RESYNC_ENABLE
+
+    /* key combination for command */
+    #define IS_COMMAND() ( \
+        keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+    )
+#endif

keyboards/dk60/dk60.c

@@ -0,0 +1,34 @@
+#include "dk60.h"
+
+void dk60_blink_all_leds(void)
+{
+    dk60_led_all_off();
+    dk60_led_all_on();
+    _delay_ms(500);
+    dk60_led_all_off();
+}
+
+void matrix_init_kb(void) {
+    led_init_ports();
+    dk60_blink_all_leds();
+
+    matrix_init_user();
+}
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRE |= (1<<6);
+    DDRF |= (1<<0);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+		// Turn capslock on
+		dk60_caps_led_on();
+	} else {
+		// Turn capslock off
+		dk60_caps_led_off();
+	}
+
+	led_set_user(usb_led);
+}

keyboards/dk60/dk60.h

@@ -0,0 +1,41 @@
+#ifndef DK60_H
+    #define DK60_H
+
+    #include "quantum.h"
+    #include <util/delay.h>
+
+    inline void dk60_caps_led_on(void)      {  PORTE |= (1<<6); }
+    inline void dk60_esc_led_on(void)    	{  PORTF |= (1<<0); }
+
+    inline void dk60_caps_led_off(void)     { PORTE &= ~(1<<6); }
+    inline void dk60_esc_led_off(void)   	{ PORTF &= ~(1<<0); }
+
+    inline void dk60_led_all_on(void)
+    {
+        dk60_caps_led_on();
+        dk60_esc_led_on();
+    }
+
+    inline void dk60_led_all_off(void)
+    {
+        dk60_caps_led_off();
+        dk60_esc_led_off();
+    }
+
+    #define ___ KC_NO
+
+    #define KEYMAP( \
+        K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K4B, K4A, \
+        K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K4C, \
+        K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+        K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+             K41, K42,           K45,           K48, K49  \
+    ) { \
+        { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
+        { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \
+        { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
+        { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C }, \
+        { ___, K41, K42, ___, ___, K45, ___, ___, K48, K49, K4A, K4B, K4C }  \
+    }
+
+#endif

keyboards/dk60/keymaps/default/keymap.c

@@ -0,0 +1,80 @@
+#include "dk60.h"
+#include "action_layer.h"
+
+enum planck_layers {
+  _QWERTY,
+  _FN,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  FN
+};
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty gui/alt/space/alt/gui
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RShift    | FN  |
+ * |-----------------------------------------------------------------------------------------+
+ *         |LGUI | LAlt  |               Space                | RAlt   |RGUI |
+ *         `-----------------------------------------------------------------'
+ */
+  [_QWERTY] = KEYMAP( /* Basic QWERTY */
+      KC_ESC,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,   KC_0,       KC_MINS,    KC_EQL, KC_BSLS,    KC_GRV, \
+      KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,       KC_LBRC,    KC_RBRC,KC_BSPC,  \
+      KC_LCTL,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,   KC_SCLN,    KC_QUOT,    KC_ENT,   \
+      KC_LSFT,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH,    KC_RSFT,    FN, \
+                KC_LGUI,KC_LALT,                KC_SPC,                          KC_RALT,KC_RGUI \
+      ),
+
+/* FN Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |  CAPS  |     |     |     |     |     |     |     | Psc | Slck| Paus| Up  |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *         |       |       |                                 | Stop  |       |
+ *         `-----------------------------------------------------------------'
+ */
+  [_FN] = KEYMAP( /* Layer 1 */
+      ______, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, KC_INS,  KC_DEL, \
+      KC_CAPS,  ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   ______, ______,  \
+      ______,   KC_VOLD,KC_VOLU,KC_MUTE,______, ______, KC_PAST,KC_PSLS,KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______,   \
+      ______,   KC_MPRV,KC_MPLY,KC_MNXT,______, ______, KC_PPLS,KC_PMNS,KC_END,  KC_PGDN, KC_DOWN, ______,  ______,  \
+                ______, ______,                 ______,                 KC_MSTP, ______ \
+      )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case FN:
+      if (record->event.pressed) {
+        layer_on(_FN);
+        dk60_esc_led_on();
+      } else {
+        layer_off(_FN);
+        dk60_esc_led_off();
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/dk60/readme.md

@@ -0,0 +1,8 @@
+DK60 keyboard firmware
+======================
+
+Another 60% keyboard with different HHKB layout
+
+More information here: https://github.com/Dbroqua/DK60
+
+Open Hardware project!

keyboards/dk60/rules.mk

@@ -0,0 +1,21 @@
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+# COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= no  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= yes 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+SLEEP_LED_ENABLE ?= yes

keyboards/ergodox/keymaps/333fred/Makefile

@@ -0,0 +1,12 @@
+SUBPROJECT_DEFAULT = infinity
+LCD_BACKLIGHT_ENABLE = yes
+LCD_ENABLE = yes
+LED_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+NKRO_ENABLE = yes
+TAP_DANCE_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+

keyboards/ergodox/keymaps/333fred/README.md

@@ -0,0 +1,122 @@
+## Layout
+
+### Keymap 0: Basic layer
+```
+,--------------------------------------------------.           ,--------------------------------------------------.
+|   `    |   1  |   2  |   3  |   4  |   5  |  =   |           |  L1  |   6  |   7  |   8  |   9  |   0  |   -    |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+| TAB    |   Q  |   W  |   E  |   R  |   T  |  L2  |           |  L2  |   Y  |   U  |   I  |   O  |   P  |   \    |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+| Esc    |   A  |   S  |   D  |LT 3,F|   G  |------|           |------|   H  |   J  |   K  |   L  |; / : |   '    |
+|--------+------+------+------+------+------|  L1  |           |TT(3) |------+------+------+------+------+--------|
+| LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |LCTRL |  F4  |  F5  | LGUI | LALT |                                       | Left | Down |  Up  | Right| RGUI |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       | Home | End  |       | Alt  |Ctrl/Esc|
+                                ,------|------|------|       |------+--------+------.
+                                |      |      | PgUp |       | PgDn |        |      |
+                                | Bcksp|OSL(2)|------|       |------|  Ent   |Space |
+                                |      |      | Del  |       |OSL(2)|        |      |
+                                `--------------------'       `----------------------'
+```
+* Double-click `;` to get a `:`
+* Press-and-hold `f` to go to the movement layer
+
+### Keymap 1: Code Layer
+```
+,--------------------------------------------------.           ,--------------------------------------------------.
+|        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+|        |      |      |      |      |      |  F10 |           |  F11 |      |      |      |      |      |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |      |      |      |      |      |------|           |------|      |      |      |      |      |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |      |      |      |      |      |                                       |      |      |      |      |      |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,---------------.
+                                       |Format|      |       | Test | DTest  |
+                                ,------|------|------|       |------+--------+------.
+                                |      |      |Refact|       |      |        |      |
+                                |      |      |------|       |------|        |      |
+                                |      |      |      |       |      |        |      |
+                                `--------------------'       `----------------------'
+```
+* Format - Visual Studio Format. Sends `CTRL + K, CTRL + D`
+* Refact - Visual Studio Refactor. Sends `CTRL + R, R`
+* Test   - Visual Studio Run Test. Sends `CTRL + R, T`
+* DTest  - Visual Studio Debug Test. Sends `CTRL + R, CTRL + T`
+
+### Keymap 2: Symbol Layer
+```
+,---------------------------------------------------.           ,--------------------------------------------------.
+|Version  |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+|---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
+|         |   !  |   @  |   (  |   )  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+|---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|         |   #  |   $  |   {  |   }  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+|---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|         |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+`---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  | EPRM  |      |      |      |      |                                       |   0  |   0  |   .  |   =  |      |
+  `-----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       |      | Caps |       |      |      |
+                                ,------|------|------|       |------+------+------.
+                                |      |      |APscr |       |      |      |      |
+                                |      |      |------|       |------|      |      |
+                                |      |      | PScr |       |      |      |      |
+                                `--------------------'       `--------------------'
+```
+* APscr - Take a printscreen of the current app. Sends `Alt + Print Screen`
+
+### Keymap 3: Media and Mouse Keys
+```
+,--------------------------------------------------.           ,--------------------------------------------------.
+|        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+|        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |      |      |      | Lclk | Rclk |                                       |      |      |      |      |      |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       |      |      |       | Vol+ |      |
+                                ,------|------|------|       |------+------+------.
+                                |      |      |      |       | Vol- |      |      |
+                                |      |      |------|       |------| PL/PS| Next |
+                                |      |      |      |       | Back |      |      |
+                                `--------------------'       `--------------------'
+```
+
+### Keymap 4: Movement
+```
+,--------------------------------------------------.           ,--------------------------------------------------.
+|        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+|        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |DLeft |DRight|LShift|      |      |------|           |------| Left | Down |  Up  | Right|      |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |KOpen |KType |      |      |      |      |           |      |      |      |      |      |      |        |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |      |      |      |      |      |                                       |      |      |      |      |      |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       |      |      |       |      |      |
+                                ,------|------|------|       |------+------+------.
+                                |      |      |      |       |      |      |      |
+                                |      | CTRL |------|       |------|      |      |
+                                |      |      |      |       |      |      |      |
+                                `--------------------'       `--------------------'
+```
+* DLeft - Move to the left Desktop. Sends `Ctrl + Win + Left Arrow`
+* DRight - Move to the right Desktop. Sends `Ctrl + Win + Right Arrow`
+* KOpen - Opens KeePass. Sends `Ctrl + Alt + k`
+* KType - Autotypes KeePass password. Sends `Ctrl + Alt + a`

keyboards/ergodox/keymaps/333fred/keymap.c

@@ -0,0 +1,361 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define BASE 0 // default layer
+#define CODE 1 // code layer
+#define SYMB 2 // symbols
+#define MDIA 3 // media keys
+#define MOVE 4 // movement layer
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+};
+
+enum custom_macros {
+  VERSION,
+  EEPROM,
+
+  // Windows macros
+  DLEFT,
+  DRIGHT,
+  PSCREEN_APP,
+
+  // VS Macros
+  REFACTOR,
+  TEST,
+  DEBUG_TEST,
+  FORMAT,
+
+  // KeePass macros
+  KEEPASS_OPEN,
+  KEEPASS_TYPE,
+};
+
+// Tap Dance Definitions
+enum tap_dance_custom_keys {
+  TD_SEMICOLON_COLON = 0
+};
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_SEMICOLON_COLON] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_COLON)
+};
+
+// NOTE: Cells marked with ACCESS must remain transparent, they're the keys that actually get to that layer
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   `    |   1  |   2  |   3  |   4  |   5  |  =   |           |  L1  |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | TAB    |   Q  |   W  |   E  |   R  |   T  |  L2  |           |  L2  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Esc    |   A  |   S  |   D  |LT 3,F|   G  |------|           |------|   H  |   J  |   K  |   L  |; / : |   '    |
+ * |--------+------+------+------+------+------|  L1  |           |MO(3) |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |LCTRL |  F4  |  F5  | LGUI | LALT |                                       | Left | Down |  Up  | Right| RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | Home | End  |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | PgUp |       | PgDn |        |      |
+ *                                 | Bcksp|OSL(2)|------|       |------|  Ent   |Space |
+ *                                 |      |      | Del  |       |OSL(2)|        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+        // left hand
+        KC_GRV,        KC_1,         KC_2,   KC_3,   KC_4,          KC_5,   KC_EQL,
+        KC_TAB,        KC_Q,         KC_W,   KC_E,   KC_R,          KC_T,   TG(SYMB),
+        KC_ESC,        KC_A,         KC_S,   KC_D,   LT(MOVE, KC_F),KC_G,
+        KC_LSFT,       CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,          KC_B,   TG(CODE),
+        KC_LCTRL,      KC_F4,        KC_F5,  KC_LGUI,KC_LALT,
+                                                                             KC_HOME,  KC_END,
+                                                                                       KC_PGUP,
+                                                                     KC_BSPC,OSL(SYMB),KC_DEL,
+        // right hand
+             TG(CODE),    KC_6,   KC_7,   KC_8,   KC_9,   KC_0,                  KC_MINS,
+             TG(SYMB),    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,                  KC_BSLS,
+                          KC_H,   KC_J,   KC_K,   KC_L,   TD(TD_SEMICOLON_COLON),KC_QUOT,
+             MO(MDIA),    KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),        KC_RSFT,
+                                  KC_LEFT,KC_DOWN,KC_UP,  KC_RIGHT,          KC_RGUI,
+             KC_RALT,        CTL_T(KC_ESC),
+             KC_PGDN,
+             OSL(SYMB),KC_ENT, KC_SPC
+    ),
+/* Keymap 1: Code Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |ACCESS|      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |  F10 |           |  F11 |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------|      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|ACCESS|           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,---------------.
+ *                                        |Format|      |       | Test | DTest  |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      |Refact|       |      |        |      |
+ *                                 |      |      |------|       |------|        |      |
+ *                                 |      |      |      |       |      |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[CODE] = KEYMAP(  // layer 1 : code
+        // left hand
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F10,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                                                             M(FORMAT), KC_TRNS,
+                                                                                      M(REFACTOR),
+                                                                    KC_TRNS, KC_TRNS, KC_TRNS,
+        // right hand
+
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+            KC_F11,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                              KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+             M(TEST), M(DEBUG_TEST),
+             KC_TRNS,
+             KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+/* Keymap 2: Symbol Layer
+ *
+ * ,---------------------------------------------------.           ,--------------------------------------------------.
+ * |Version  |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
+ * |         |   !  |   @  |   (  |   )  |   |  |ACCESS|           |ACCESS|   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   #  |   $  |   {  |   }  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | EPRM  |      |      |      |      |                                       |   0  |   0  |   .  |   =  |      |
+ *   `-----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      | Caps |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |APScr |       |      |      |      |
+ *                                 |      |ACCESS|------|       |------|      |      |
+ *                                 |      |      | PScr |       |ACCESS|      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LPRN,KC_RPRN,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LCBR,KC_RCBR,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       KC_TRNS,KC_CAPS,
+                                               M(PSCREEN_APP),
+                               KC_TRNS,KC_TRNS,KC_PSCR,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_0,   KC_0,    KC_DOT,  KC_EQL,  KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+/* Keymap 3: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |ACCESS|------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       | Vol+ |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       | Vol- |      |      |
+ *                                 |      |      |------|       |------| PL/PS| Next |
+ *                                 |      |      |      |       | Back |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_VOLU, KC_TRNS,
+       KC_VOLD,
+       KC_MPRV, KC_MPLY, KC_MNXT
+),
+/* Keymap 4: Movement
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |DLeft |DRight|LShift|ACCESS|      |------|           |------| Left | Down |  Up  | Right|      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |KOpen |KType |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      | CTRL |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MOVE] = KEYMAP(
+       KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, M(DLEFT),       M(DRIGHT),      KC_LSFT, KC_TRNS, KC_TRNS,
+       KC_TRNS, M(KEEPASS_OPEN),M(KEEPASS_TYPE),KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS,
+                                             KC_TRNS, KC_TRNS,
+                                                      KC_TRNS,
+                                    KC_TRNS, KC_LCTRL,KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+
+)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case VERSION:
+          if (record->event.pressed) {
+            SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+          }
+          break;
+        case EEPROM:
+          if (record->event.pressed) { // For resetting EEPROM
+            eeconfig_init();
+          }
+          break;
+        case DLEFT:
+          if (record->event.pressed) { // Windows move desktop left
+            return MACRO(D(LCTL), D(LGUI), T(LEFT), U(LGUI), U(LCTL), END);
+          }
+          break;
+        case DRIGHT:
+          if (record->event.pressed) { // Windows move desktop right
+            return MACRO(D(LCTL), D(LGUI), T(RIGHT), U(LGUI), U(LCTL), END);
+          }
+          break;
+        case PSCREEN_APP:
+          if (record->event.pressed) {
+            return MACRO(D(LALT), T(PSCR), U(LALT));
+          }
+          break;
+        case REFACTOR:
+          if (record->event.pressed) { // VS Refactor CTRL+R, R
+            return MACRO(D(LCTL), T(R), U(LCTL), T(R), END);
+          }
+          break;
+        case TEST:
+          if (record->event.pressed) { // VS Run Tests CTRL+R, T
+            return MACRO(D(LCTL), T(R), U(LCTL), T(T), END);
+          }
+          break;
+        case DEBUG_TEST:
+          if (record->event.pressed) { // VS Debug Tests CTRL+R, CTRL+T
+            return MACRO(D(LCTL), T(R), T(T), U(LCTL), END);
+          }
+          break;
+        case FORMAT:
+          if (record->event.pressed) { // VS Format Document, CTRL+K, CTRL+D
+            return MACRO(D(LCTL), T(K), T(D), U(LCTL), END);
+          }
+          break;
+        case KEEPASS_OPEN:
+          if (record->event.pressed) { // Keepass open application
+            return MACRO(D(LCTL), D(LALT), T(K), U(LALT), U(LCTL), END);
+          }
+          break;
+        case KEEPASS_TYPE:
+          if (record->event.pressed) { // Keepass autotype
+            return MACRO(D(LCTL), D(LALT), T(A), U(LALT), U(LCTL), END);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+    ergodox_board_led_on();
+    ergodox_led_all_on();
+};
+

keyboards/ergodox/keymaps/333fred/visualizer.c

@@ -0,0 +1,33 @@
+/*
+Note: this is a modified copy of ../default/visualizer.c, originally licensed GPL.
+*/
+
+#include "simple_visualizer.h"
+
+// This function should be implemented by the keymap visualizer
+// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing
+// that the simple_visualizer assumes that you are updating
+// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is
+// stopped. This can be done by either double buffering it or by using constant strings
+static void get_visualizer_layer_and_color(visualizer_state_t* state) {
+    uint8_t saturation = 60;
+    if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) {
+        saturation = 255;
+    }
+    if (state->status.layer & 0x10) {
+        state->target_lcd_color = LCD_COLOR(140, 100, 60);
+        state->layer_text = "Movement";
+    } else if (state->status.layer & 0x8) {
+        state->target_lcd_color = LCD_COLOR(0, saturation, 0xFF);
+        state->layer_text = "Media";
+    } else if (state->status.layer & 0x4) {
+        state->target_lcd_color = LCD_COLOR(168, saturation, 0xFF);
+        state->layer_text = "Symbol";
+    } else if (state->status.layer & 0x2) {
+        state->target_lcd_color = LCD_COLOR(216, 90, 0xFF);
+        state->layer_text = "Code";
+    } else {
+        state->target_lcd_color = LCD_COLOR(84, saturation, 0xFF);
+        state->layer_text = "Default";
+    }
+}

keyboards/ergodox/keymaps/adam/config.h

@@ -0,0 +1,6 @@
+#include "../../config.h"
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 300 //At 500 some bad logic takes hold
+#define PREVENT_STUCK_MODIFIERS
+#define IGNORE_MOD_TAP_INTERRUPT

keyboards/ergodox/keymaps/adam/keymap.c

@@ -0,0 +1,174 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+
+#define BASE 0 // default layer
+#define FLOCK 1 // symbols arrows and F keys on F held down
+#define JLOCK 2 // same as Flock but with fall thru J and mapped to J held down
+#define CAPLOCK 3 //caps on until space / enter / esc
+#define SFLOCK 11 // symbols arrows and F keys on F held down
+#define SJLOCK 12 // same as Flock but with fall thru J and mapped to J held down
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Sends macro when key is tapped, presses mod when key is held
+#define tap_mod_macro(record, mod, macro) ( ((record)->event.pressed) ? \
+     ( ((record)->tap.count <= 0 || (record)->tap.interrupted) ? MACRO(D(mod), END) : MACRO_NONE ) : \
+     ( ((record)->tap.count > 0 && !((record)->tap.interrupted)) ? (macro) : MACRO(U(mod), END) ) )
+
+#define tap_mod_shift(record, mod, macro) ( ((record)->event.pressed) ? \
+          ( ((record)->tap.count <= 0 || (record)->tap.interrupted) ? MACRO(D(mod), END) : MACRO_NONE ) : \
+          ( ((record)->tap.count > 0 && !((record)->tap.interrupted)) ? (MACRO( D(LSFT), T(LBRC), U(LSFT), END)) : MACRO(U(mod), END) ) )
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Layout
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |   1  |   2  |   3  |   4  |   5  |      |           |      |   6  |   7  |   8  |   9  |   0  |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   Q  |   W  |   E  |   R  |   T  |      |           |      |   Y  |   U  |   I  |   O  |   P  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |;     |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |  Z   |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |       |     |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |        |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      |      |       |      |        |      |
+ *                                 |      |      |------|       |------|        |      |
+ *                                 |      |      |      |       |      |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+        [BASE] = KEYMAP(
+                // left hand
+                GUI_T(KC_ESC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS,
+                _______, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TAB,
+                _______, SFT_T(KC_A), ALT_T(KC_S), CTL_T(KC_D), F(FLOCK), GUI_T(KC_G),
+                _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BSPC,
+                _______, _______,  _______,  _______ ,_______,
+                _______,  _______,
+                _______,
+                KC_SPC, _______, _______ ,
+
+                // right hand
+                KC_EQL,     KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             _______,
+                KC_TAB,     KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             _______,
+                GUI_T(KC_H),   F(JLOCK),   CTL_T(KC_K),   ALT_T(KC_L),   SFT_T(KC_SCLN),           _______,
+                KC_DELETE,  KC_N,   KC_M,   KC_COMM,KC_DOT, KC_QUOT,           _______,
+                _______,  _______,_______,_______,          _______,
+                _______,        _______,
+                _______,
+                _______,_______, KC_ENT
+        ),
+        [FLOCK] = KEYMAP(
+                // left hand
+                XXXXXXX,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F11,
+                XXXXXXX,KC_LBRC,XXXXXXX,  XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,
+                XXXXXXX,S(KC_LBRC),XXXXXXX, XXXXXXX,_______,XXXXXXX,
+                XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,TO(CAPLOCK),XXXXXXX,
+                XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,
+                XXXXXXX,XXXXXXX,
+                XXXXXXX,
+                KC_ESC,XXXXXXX,XXXXXXX,
+                // right hand
+                KC_F12, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  XXXXXXX,
+                XXXXXXX, XXXXXXX, KC_HOME,   KC_PGUP,    XXXXXXX,    KC_RBRC, XXXXXXX,
+                KC_LEFT, KC_DOWN,   KC_UP,    KC_RIGHT,    S(KC_RBRC), XXXXXXX,
+                XXXXXXX, XXXXXXX, KC_END,   KC_PGDOWN,    KC_QUES,    KC_SLSH, XXXXXXX,
+                XXXXXXX, XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,
+                XXXXXXX, XXXXXXX,
+                XXXXXXX,
+                XXXXXXX, XXXXXXX, XXXXXXX
+        ),
+        [JLOCK] = KEYMAP(
+                // left hand
+                XXXXXXX,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F11,
+                XXXXXXX,KC_LBRC,KC_GRV,  KC_TILD,XXXXXXX,XXXXXXX,XXXXXXX,
+                XXXXXXX,S(KC_LBRC),XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,
+                XXXXXXX,KC_BSLS,KC_PIPE,XXXXXXX,XXXXXXX,TO(CAPLOCK),XXXXXXX,
+                XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,
+                XXXXXXX,XXXXXXX,
+                XXXXXXX,
+                KC_ESC,XXXXXXX,XXXXXXX,
+                // right hand
+                KC_F12, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  XXXXXXX,
+                  XXXXXXX, XXXXXXX, XXXXXXX,   XXXXXXX,    XXXXXXX,    KC_RBRC, XXXXXXX,
+                XXXXXXX, _______,   XXXXXXX,  XXXXXXX,    S(KC_RBRC), XXXXXXX,
+                XXXXXXX, XXXXXXX, XXXXXXX,   XXXXXXX,    XXXXXXX,    XXXXXXX, XXXXXXX,
+                XXXXXXX,XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,
+                XXXXXXX, XXXXXXX,
+                XXXXXXX,
+                XXXXXXX, XXXXXXX, XXXXXXX
+        ),
+        [CAPLOCK] = KEYMAP(
+                // left hand
+                TO(BASE), _______, _______, _______, _______, _______, _______,
+                _______, S(KC_Q), S(KC_W), S(KC_E), S(KC_R), S(KC_T), _______,
+                // _______, SFT_T(S(KC_A)), ALT_T(KC_S), CTL_T(KC_D), F(FLOCK), GUI_T(KC_G),
+                _______, S(KC_A), S(KC_S), S(KC_D), S(KC_F), S(KC_G),
+                _______, S(KC_Z), S(KC_X), S(KC_C), S(KC_V), S(KC_B), _______,
+                _______, _______,  _______,  _______ ,_______,
+                _______,  _______,
+                _______,
+                TO(BASE), _______, _______ ,
+
+                // right hand
+                _______,     _______,   _______,   _______,   _______,   _______,             _______,
+                _______,     S(KC_Y),   S(KC_U),   S(KC_I),   S(KC_O),   S(KC_P),             _______,
+                         S(KC_H),   S(KC_J),   S(KC_K),   S(KC_L),   S(KC_SCLN),           _______,
+                _______,  S(KC_N),   S(KC_M),   S(KC_COMM),S(KC_DOT), S(KC_QUOT),           _______,
+                _______,  _______,_______,_______,          _______,
+                _______,        _______,
+                _______,
+                _______,_______, TO(BASE)
+        )
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+        [1] = ACTION_LAYER_TAP_KEY(FLOCK,KC_F),
+        [2] = ACTION_LAYER_TAP_KEY(JLOCK,KC_J),
+        [11] = ACTION_LAYER_TAP_KEY(FLOCK,LSFT(KC_F)),
+        [12] = ACTION_LAYER_TAP_KEY(JLOCK,LSFT(KC_J))
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+        // MACRODOWN only works in this function
+        switch(id) {
+        case 0:
+                if (record->event.pressed) {
+                        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+                }
+                break;
+        }
+
+        return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+  uint8_t layer = biton32(layer_state);
+
+  switch (layer) {
+    // TODO: Make this relevant to the ErgoDox EZ.
+      case 1:
+          break;
+      case 2:
+          break;
+      default:
+          // none
+          break;
+  }
+};

keyboards/ergodox/keymaps/adam/readme.md

@@ -0,0 +1,3 @@
+# Adam's ErgoDox
+
+Currently only really uses keys available on Let's Split, for ease of switching

keyboards/ergodox/readme.md

@@ -78,7 +78,6 @@ Linux page].  Some distributions provide a binary, maybe called
 To flash the firmware:
 
   - Build the firmware with `make keymapname`, for example `make default`
-
   - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g.
     `ergodox_ez_default.hex`
 

keyboards/gherkin/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/gherkin/README.md

@@ -0,0 +1,12 @@
+
+About
+------
+
+First pass at adding support for the gherkin keyboard. Compiles but completely
+untested. Intended to kick-start development.
+
+* [Gherkin project on 40% Keyboards](http://www.40percent.club/2016/11/gherkin.html)
+* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gherkin)
+
+Credit to JadedC for the initial work.
+

keyboards/gherkin/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    qmkbuilder
+#define PRODUCT         keyboard
+#define DESCRIPTION     Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 6
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/gherkin/gherkin.c

@@ -0,0 +1 @@
+#include "gherkin.h"

keyboards/gherkin/gherkin.h

@@ -0,0 +1,18 @@
+#ifndef GHERKIN_H
+#define GHERKIN_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	 K00,   K01,   K02,   K03,   K04,   K05,   K10,   K11,   K12,   K13 , \
+	 K14,   K15,   K20,   K21,   K22,   K23,   K24,   K25,   K30,   K31 , \
+	 K32,   K33,   K34,   K35,   K40,   K41,   K42,   K43,   K44,   K45   \
+) { \
+	{ K00,   K01,   K02,   K03,   K04,   K05 }, \
+	{ K10,   K11,   K12,   K13,   K14,   K15 }, \
+	{ K20,   K21,   K22,   K23,   K24,   K25 }, \
+	{ K30,   K31,   K32,   K33,   K34,   K35 }, \
+	{ K40,   K41,   K42,   K43,   K44,   K45 }  \
+}
+
+#endif

keyboards/gherkin/keymaps/default/keymap.c

@@ -0,0 +1,171 @@
+#include "gherkin.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		LT(1, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, 
+		KC_U, KC_I, KC_O, KC_P, KC_A, KC_S, 
+		KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, 
+		KC_L, KC_ESC, KC_Z, KC_X, KC_C, KC_V, 
+		KC_BSPC, KC_SPC, KC_B, KC_N, KC_M, KC_ENT),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, BL_DEC),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	keyevent_t event = record->event;
+    (void)event;
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+		DDRD |= (1 << 5); PORTD &= ~(1 << 5);
+	} else {
+		DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 0); PORTB &= ~(1 << 0);
+	} else {
+		DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+		
+	} else {
+		
+	}
+
+}

keyboards/gherkin/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no

keyboards/lets_split/keymaps/adam/config.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#define USE_SERIAL
+
+//#define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#ifdef SUBPROJECT_rev1
+    #include "../../rev1/config.h"
+#endif
+#ifdef SUBPROJECT_rev2
+    #include "../../rev2/config.h"
+    /* RGB Underglow */
+    #undef RGBLED_NUM
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLED_NUM 8
+#endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "../../rev2fliphalf/config.h"
+#endif
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 200 //At 500 some bad logic takes hold
+#define PREVENT_STUCK_MODIFIERS
+#define IGNORE_MOD_TAP_INTERRUPT
+#define PERMISSIVE_HOLD

keyboards/lets_split/keymaps/adam/keymap.c

@@ -0,0 +1,79 @@
+#include "lets_split.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define BASE 0 // default layer
+#define FLOCK 1 // symbols arrows and F keys on F held down
+#define JLOCK 2 // same as Flock but with fall thru J and mapped to J held down
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower | Bksp |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[BASE] = KEYMAP ( \
+  TD(1),         KC_2,       KC_3,         KC_4,     KC_5,         KC_MINS, KC_EQL,    KC_6,        KC_7,        KC_8,         KC_9,           KC_0,     \
+  KC_Q,         KC_W,       KC_E,         KC_R,     KC_T,         KC_TAB,  KC_TAB,    KC_Y,        KC_U,        KC_I,         KC_O,           KC_P,    \
+  SFT_T(KC_A),  ALT_T(KC_S),CTL_T(KC_D),  F(FLOCK), GUI_T(KC_G),  KC_BSPC, KC_DELETE, GUI_T(KC_H), F(JLOCK),    CTL_T(KC_K),  ALT_T(KC_L),    SFT_T(KC_SCLN), \
+  KC_Z,         KC_X,       KC_C,         KC_V,     KC_B,         KC_SPC,  KC_ENT,    KC_N,        KC_M,        KC_COMM,      KC_DOT,         KC_QUOTE
+),
+[FLOCK] = KEYMAP ( \
+  KC_F1,      KC_F2,      KC_F3,       KC_F4,      KC_F5,      KC_F11,     KC_F12,     KC_F6,      KC_F7,      KC_F8,     KC_F9,    KC_F10, \
+  KC_LBRC,    KC_GRV,     KC_TILDE,    S(KC_1),    XXXXXXX,    XXXXXXX,    XXXXXXX,    XXXXXXX,    KC_HOME,    KC_PGUP,   XXXXXXX,  KC_RBRC, \
+  S(KC_LBRC), _______,    _______,     _______,    _______,    XXXXXXX,    XXXXXXX,    KC_LEFT,    KC_DOWN,    KC_UP,     KC_RIGHT, S(KC_RBRC), \
+  KC_BSLS,    KC_PIPE,    XXXXXXX,     XXXXXXX,    XXXXXXX,    KC_ESC,     KC_ESC,     XXXXXXX,    KC_END,     KC_PGDOWN, KC_QUES,  KC_SLASH \
+),
+[JLOCK] = KEYMAP ( \
+  KC_F1,      KC_F2,      KC_F3,       KC_F4,      KC_F5,      KC_F11,     KC_F12,     KC_F6,      KC_F7,      KC_F8,     KC_F9,    KC_F10, \
+  KC_LBRC,    KC_GRV,     KC_TILDE,    S(KC_1),    XXXXXXX,    XXXXXXX,    XXXXXXX,    XXXXXXX,    KC_HOME,    KC_PGUP,   XXXXXXX,  KC_RBRC, \
+  S(KC_LBRC), _______,    _______,     _______,    _______,    XXXXXXX,    XXXXXXX,    KC_LEFT,    _______,    KC_UP,     KC_RIGHT, S(KC_RBRC), \
+  KC_BSLS,    KC_PIPE,    XXXXXXX,     XXXXXXX,    XXXXXXX,    KC_ESC,     KC_ESC,     XXXXXXX,    KC_END,     KC_PGDOWN, KC_QUES,  KC_SLASH \
+)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [FLOCK] = ACTION_LAYER_TAP_KEY(FLOCK,KC_F),
+  [JLOCK] = ACTION_LAYER_TAP_KEY(JLOCK,KC_J)
+};
+#ifdef TAP_DANCE_ENABLE
+void tap_1(qk_tap_dance_state_t *state, void *user_data) {
+  switch (state->count) {
+  case 1:
+    register_code (KC_1);
+    unregister_code (KC_1);
+    break;
+  case 2:
+    register_code (KC_ESC);
+    unregister_code (KC_ESC);
+    break;
+  case 3:
+    register_code (KC_LSFT);
+    register_code (KC_1);
+    unregister_code (KC_1);
+    unregister_code (KC_LSFT);
+  }
+}
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+	[0]  = ACTION_TAP_DANCE_DOUBLE(KC_1, KC_ESC),
+  [1]  = ACTION_TAP_DANCE_FN(tap_1)
+};
+#endif

keyboards/lets_split/keymaps/adam/makefile

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/lets_split/keymaps/hexwire/keymap.c

@@ -67,7 +67,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
      TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , O  , E  , U  , I  ,      D  , H  , R  , N  , S  ,SLSH,
+      X0 , A  , O  , E  , U  , I  ,      D  , H  , T  , N  , S  ,SLSH,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
      LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|

keyboards/nyquist/Makefile

@@ -0,0 +1,5 @@
+SUBPROJECT_DEFAULT = rev1
+
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/nyquist/config.h

@@ -0,0 +1,27 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1/config.h"
+#endif
+
+#endif  // CONFIG_H

keyboards/nyquist/i2c.c

@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif

keyboards/nyquist/i2c.h

@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  100000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif

keyboards/nyquist/keymaps/hexwire/Makefile

@@ -0,0 +1,5 @@
+RGBLIGHT_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/nyquist/keymaps/hexwire/README.md

@@ -0,0 +1,116 @@
+Hexwire's Nyquist Layout
+============================
+
+### Changes from default layout
+
+- Main layer
+    - The right space bar key has been changed to backspace, as I only hit space with my left thumb
+    - Backtick is at the lower right and also serves goes to the 3rd function layer when held
+    - Enter key acts as shift when held
+    - Escape key acts as control when held
+    - Minus key at upper right
+- Lower layer
+    - Numbers are on the lower layer, to make it easier to use a numpad on the right hand
+    - Arrow keys
+    - Straight and curly brackets in the middle two columns
+    - Screenshot keys for MacOS
+- Upper layer
+    - Symbols are on the upper layer
+    - Media keys
+    - Page Up/Down, Home/End
+- 3rd function layer
+    - Function keys
+
+## Layouts
+
+### QWERTY
+
+```
+,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+|ESC , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,BSPC|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+| X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+| X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT|
+`----+----+----+----+----+----'    `----+----+----+----+----+----'
+```
+
+### Colemak
+```
+,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+|ESC , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,BSPC|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+| X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+| X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT|
+`----+----+----+----+----+----'    `----+----+----+----+----+----'
+```
+
+### Dvorak
+```
+,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+|ESC , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,BSPC|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+| X0 , A  , O  , E  , U  , I  ,      D  , H  , T  , N  , S  ,SLSH|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+| X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT|
+`----+----+----+----+----+----'    `----+----+----+----+----+----'
+```
+
+### Lower
+```
+,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+|TILD,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,BSPC|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|    , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,    |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|DEL ,CAPP,LEFT,RGHT, UP ,LBRC,     RBRC, P4 , P5 , P6 ,PLUS,PIPE|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|    ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|    ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,   |
+`----+----+----+----+----+----'    `----+----+----+----+----+----'
+```
+
+### Raise
+```
+,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+|TILD,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,BSPC|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|    ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,    |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|DEL ,MPRV,MNXT,VOLU,PGUP,UNDS,     EQL ,HOME,    ,    ,    ,BSLS|
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|MUTE,MSTP,MPLY,VOLD,PGDN,MINS,     PLUS,END ,    ,    ,    ,    |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    |
+`----+----+----+----+----+----'    `----+----+----+----+----+----'
+```
+
+### 3rd function layer
+
+```
+,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+|F12 , F1 , F2 , F3 , F4 , F5 ,      F6 , F7 , F8 , F9 ,F10 ,F11 |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    |
+|----+----+----+----+----+----|    |----+----+----+----+----+----|
+|    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    |
+`----+----+----+----+----+----'    `----+----+----+----+----+----'
+```

keyboards/nyquist/keymaps/hexwire/Underglow Pinouts.md

@@ -0,0 +1,20 @@
+# Let's Split RGB Underglow
+
+## Master
+
+### Pro Micro
+- Red: LED +5V -> Pro Micro VCC
+- Green: LED Din -> Pro Micro TX0
+- Black: LED GND -> Pro Micro GND
+
+### TRRS
+- Red: LED +5V -> PCB VCC
+- Green: LED Do  -> PCB Extra Data
+- Black: LED GND -> PCB GND
+
+## Slave
+
+### TRRS
+- Red: LED +5V -> PCB VCC
+- Green: LED Din -> PCB Extra Data
+- Black: LED GND -> PCB GND

keyboards/nyquist/keymaps/hexwire/config.h

@@ -0,0 +1,31 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define USE_SERIAL
+
+#define TAPPING_TERM 150
+
+#ifdef SUBPROJECT_rev1
+    #include "../../rev1/config.h"
+#endif
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/nyquist/keymaps/hexwire/keymap.c

@@ -0,0 +1,218 @@
+#include "nyquist.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _FN3 5
+#define _FN4 6
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  FN3,
+  FN4,
+  ADJUST,
+};
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+#define KC_CAPW LGUI(LSFT(KC_3))        // Capture whole screen
+#define KC_CPYW LGUI(LSFT(LCTL(KC_3)))  // Copy whole screen
+#define KC_CAPP LGUI(LSFT(KC_4))        // Capture portion of screen
+#define KC_CPYP LGUI(LSFT(LCTL(KC_4)))  // Copy portion of screen
+#define KC_X0 MT(MOD_LCTL, KC_ESC)
+#define KC_X1 LOWER
+#define KC_X2 RAISE
+#define KC_X3 LT(_FN3, KC_GRV)
+#define KC_X4 MT(MOD_LSFT, KC_ENT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+     ESC , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,BSPC,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_COLEMAK] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+     ESC , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,BSPC,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_DVORAK] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+     ESC , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,BSPC,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      X0 , A  , O  , E  , U  , I  ,      D  , H  , T  , N  , S  ,SLSH,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_LOWER] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+     TILD,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     DEL ,CAPP,LEFT,RGHT, UP ,LBRC,     RBRC, P4 , P5 , P6 ,PLUS,PIPE,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,   
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_RAISE] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+     TILD,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     DEL ,MPRV,MNXT,VOLU,PGUP,UNDS,     EQL ,HOME,    ,    ,    ,BSLS,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     MUTE,MSTP,MPLY,VOLD,PGDN,MINS,     PLUS,END ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_FN3] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+     F12 , F1 , F2 , F3 , F4 , F5 ,      F6 , F7 , F8 , F9 ,F10 ,F11 ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn|      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [_ADJUST] = KEYMAP( \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
+    _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+  )
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/nyquist/keymaps/hexwire/keymap_converter.py

@@ -0,0 +1,39 @@
+#!/usr/bin/env python
+
+import re
+
+class KeymapConverter:
+
+  def __init__(self, filename):
+    self.filename = filename
+
+  def read_keymaps(self):
+    with open(self.filename) as f:
+      lines = f.readlines()
+
+    mode = 0
+    for line in lines:
+      line = line[:-1]
+      if mode == 0:
+        if "KC_KEYMAP" in line:
+          matches = re.match(r'.*\[(.*)\] = .*', line)
+          if matches:
+            layer_name = matches.group(1)
+            layer_name = layer_name[1:].capitalize()
+            print '###', layer_name
+            print '```'
+          mode = 1
+      elif mode == 1:
+        if "//" in line:
+          print line[4:]
+        elif ")" in line:
+          mode = 0
+          print '```'
+          print
+        elif line[-1] == ',':
+          print "|" + line[5:-1] + "|"
+        else:
+          print "|" + line[5:] + "|"
+
+converter = KeymapConverter('keymap.c')
+converter.read_keymaps()

keyboards/nyquist/keymaps/hexwire/keymap_to_readme.rb

@@ -0,0 +1,40 @@
+#!/usr/bin/env ruby
+
+class KeymapConverter
+
+  def initialize(filename)
+    @filename = filename
+    @mode = :search
+  end
+
+  def read_keymaps
+    lines = IO.readlines(@filename)
+    lines.each { |line| parse_line line[0..-2] }
+  end
+
+  def parse_line(line)
+    case @mode
+    when :search
+      if line =~ /KC_KEYMAP/
+        puts "### #{line}"
+        puts "```"
+        @mode = :parse
+      end
+    when :parse
+      if line =~ /\)/
+        @mode = :search
+        puts "```\n\n"
+      else 
+        line = line[4..-1]
+        line.sub!(/(,)^-/m, "|")
+        line.sub!(/( {4})/, "    |")
+
+        puts line
+      end
+    end
+  end
+
+end
+
+converter = KeymapConverter.new('keymap.c')
+converter.read_keymaps

keyboards/nyquist/keymaps/i2c/config.h

@@ -0,0 +1,26 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define USE_I2C
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#ifdef SUBPROJECT_rev1
+    #include "../../rev1/config.h"
+#endif

keyboards/nyquist/keymaps/i2c/keymap.c

@@ -0,0 +1,231 @@
+#include "nyquist.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL, \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL, \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  KEYMAP( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/nyquist/keymaps/serial/config.h

@@ -0,0 +1,26 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define USE_SERIAL
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#ifdef SUBPROJECT_rev1
+    #include "../../rev1/config.h"
+#endif

keyboards/nyquist/keymaps/serial/keymap.c

@@ -0,0 +1,232 @@
+#include "nyquist.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL, \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL, \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  KEYMAP( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/nyquist/matrix.c

@@ -0,0 +1,316 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCE
+#  define DEBOUNCE	5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void)
+{
+    // Right hand is stored after the left in the matirx so, we need to offset it
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i+offset] != cols) {
+            matrix_debouncing[i+offset] = cols;
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+        }
+    }
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        int i;
+        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+        }
+        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    int ret = _matrix_scan();
+
+
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2);
+
+#ifdef USE_I2C
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        /* i2c_slave_buffer[i] = matrix[offset+i]; */
+        i2c_slave_buffer[i] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void  init_cols(void)
+{
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
+        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    }
+}
+
+static matrix_row_t read_cols(void)
+{
+    matrix_row_t result = 0;
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+    }
+    return result;
+}
+
+static void unselect_rows(void)
+{
+    for(int x = 0; x < ROWS_PER_HAND; x++) {
+        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
+        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    }
+}
+
+static void select_row(uint8_t row)
+{
+    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
+    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}

keyboards/nyquist/nyquist.c

@@ -0,0 +1 @@
+#include "nyquist.h"

keyboards/nyquist/nyquist.h

@@ -0,0 +1,26 @@
+#ifndef NYQUIST_H
+#define NYQUIST_H
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1.h"
+#endif
+
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+    L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
+    L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
+    ) \
+    KEYMAP( \
+        KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+        KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+        KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+        KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \
+        KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45 \
+    )
+
+#include "quantum.h"
+
+#endif

keyboards/nyquist/pro_micro.h

@@ -0,0 +1,362 @@
+/*
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+// Workaround for wrong definitions in "iom32u4.h".
+// This should be fixed in the AVR toolchain.
+#undef UHCON
+#undef UHINT
+#undef UHIEN
+#undef UHADDR
+#undef UHFNUM
+#undef UHFNUML
+#undef UHFNUMH
+#undef UHFLEN
+#undef UPINRQX
+#undef UPINTX
+#undef UPNUM
+#undef UPRST
+#undef UPCONX
+#undef UPCFG0X
+#undef UPCFG1X
+#undef UPSTAX
+#undef UPCFG2X
+#undef UPIENX
+#undef UPDATX
+#undef TCCR2A
+#undef WGM20
+#undef WGM21
+#undef COM2B0
+#undef COM2B1
+#undef COM2A0
+#undef COM2A1
+#undef TCCR2B
+#undef CS20
+#undef CS21
+#undef CS22
+#undef WGM22
+#undef FOC2B
+#undef FOC2A
+#undef TCNT2
+#undef TCNT2_0
+#undef TCNT2_1
+#undef TCNT2_2
+#undef TCNT2_3
+#undef TCNT2_4
+#undef TCNT2_5
+#undef TCNT2_6
+#undef TCNT2_7
+#undef OCR2A
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+#undef OCR2B
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+
+#define NUM_DIGITAL_PINS  30
+#define NUM_ANALOG_INPUTS 12
+
+#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
+#define TXLED0          PORTD |= (1<<5)
+#define TXLED1          PORTD &= ~(1<<5)
+#define RXLED0          PORTB |= (1<<0)
+#define RXLED1          PORTB &= ~(1<<0)
+
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 3;
+#define LED_BUILTIN 13
+
+// Map SPI port to 'new' pins D14..D17
+static const uint8_t SS   = 17;
+static const uint8_t MOSI = 16;
+static const uint8_t MISO = 14;
+static const uint8_t SCK  = 15;
+
+// Mapping of analog pins as digital I/O
+// A6-A11 share with digital pins
+static const uint8_t ADC0 = 18;
+static const uint8_t ADC1 = 19;
+static const uint8_t ADC2 = 20;
+static const uint8_t ADC3 = 21;
+static const uint8_t ADC4 = 22;
+static const uint8_t ADC5 = 23;
+static const uint8_t ADC6 = 24;   // D4
+static const uint8_t ADC7 = 25;   // D6
+static const uint8_t ADC8 = 26;   // D8
+static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC10 = 28;  // D10
+static const uint8_t ADC11 = 29;  // D12
+
+#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICRbit(p) 0
+#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
+#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
+
+//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
+extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
+#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
+
+#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
+
+#ifdef ARDUINO_MAIN
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
+//
+// D0               PD2                 RXD1/INT2
+// D1               PD3                 TXD1/INT3
+// D2               PD1     SDA         SDA/INT1
+// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
+// D4       A6      PD4                 ADC8
+// D5#              PC6     ???         OC3A/#OC4A
+// D6#      A7      PD7     FastPWM     #OC4D/ADC10
+// D7               PE6                 INT6/AIN0
+//
+// D8       A8      PB4                 ADC11/PCINT4
+// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
+// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
+// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
+// D12      A11     PD6                 T1/#OC4D/ADC9
+// D13#             PC7     PWM10       CLK0/OC4A
+//
+// A0       D18     PF7                 ADC7
+// A1       D19     PF6                 ADC6
+// A2       D20     PF5                 ADC5
+// A3       D21     PF4                 ADC4
+// A4       D22     PF1                 ADC1
+// A5       D23     PF0                 ADC0
+//
+// New pins D14..D17 to map SPI port to digital pins
+//
+// MISO     D14     PB3                 MISO,PCINT3
+// SCK      D15     PB1                 SCK,PCINT1
+// MOSI     D16     PB2                 MOSI,PCINT2
+// SS       D17     PB0                 RXLED,SS/PCINT0
+//
+// Connected LEDs on board for TX and RX
+// TXLED    D24     PD5                 XCK1
+// RXLED    D17     PB0
+// HWB              PE2                 HWB
+
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &DDRB,
+    (uint16_t) &DDRC,
+    (uint16_t) &DDRD,
+    (uint16_t) &DDRE,
+    (uint16_t) &DDRF,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PORTB,
+    (uint16_t) &PORTC,
+    (uint16_t) &PORTD,
+    (uint16_t) &PORTE,
+    (uint16_t) &PORTF,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PINB,
+    (uint16_t) &PINC,
+    (uint16_t) &PIND,
+    (uint16_t) &PINE,
+    (uint16_t) &PINF,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+    PD, // D0 - PD2
+    PD, // D1 - PD3
+    PD, // D2 - PD1
+    PD, // D3 - PD0
+    PD, // D4 - PD4
+    PC, // D5 - PC6
+    PD, // D6 - PD7
+    PE, // D7 - PE6
+
+    PB, // D8 - PB4
+    PB, // D9 - PB5
+    PB, // D10 - PB6
+    PB, // D11 - PB7
+    PD, // D12 - PD6
+    PC, // D13 - PC7
+
+    PB, // D14 - MISO - PB3
+    PB, // D15 - SCK - PB1
+    PB, // D16 - MOSI - PB2
+    PB, // D17 - SS - PB0
+
+    PF, // D18 - A0 - PF7
+    PF, // D19 - A1 - PF6
+    PF, // D20 - A2 - PF5
+    PF, // D21 - A3 - PF4
+    PF, // D22 - A4 - PF1
+    PF, // D23 - A5 - PF0
+
+    PD, // D24 - PD5
+    PD, // D25 / D6 - A7 - PD7
+    PB, // D26 / D8 - A8 - PB4
+    PB, // D27 / D9 - A9 - PB5
+    PB, // D28 / D10 - A10 - PB6
+    PD, // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+    _BV(2), // D0 - PD2
+    _BV(3), // D1 - PD3
+    _BV(1), // D2 - PD1
+    _BV(0), // D3 - PD0
+    _BV(4), // D4 - PD4
+    _BV(6), // D5 - PC6
+    _BV(7), // D6 - PD7
+    _BV(6), // D7 - PE6
+
+    _BV(4), // D8 - PB4
+    _BV(5), // D9 - PB5
+    _BV(6), // D10 - PB6
+    _BV(7), // D11 - PB7
+    _BV(6), // D12 - PD6
+    _BV(7), // D13 - PC7
+
+    _BV(3), // D14 - MISO - PB3
+    _BV(1), // D15 - SCK - PB1
+    _BV(2), // D16 - MOSI - PB2
+    _BV(0), // D17 - SS - PB0
+
+    _BV(7), // D18 - A0 - PF7
+    _BV(6), // D19 - A1 - PF6
+    _BV(5), // D20 - A2 - PF5
+    _BV(4), // D21 - A3 - PF4
+    _BV(1), // D22 - A4 - PF1
+    _BV(0), // D23 - A5 - PF0
+
+    _BV(5), // D24 - PD5
+    _BV(7), // D25 / D6 - A7 - PD7
+    _BV(4), // D26 / D8 - A8 - PB4
+    _BV(5), // D27 / D9 - A9 - PB5
+    _BV(6), // D28 / D10 - A10 - PB6
+    _BV(6), // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    TIMER0B,        /* 3 */
+    NOT_ON_TIMER,
+    TIMER3A,        /* 5 */
+    TIMER4D,        /* 6 */
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    TIMER1A,        /* 9 */
+    TIMER1B,        /* 10 */
+    TIMER0A,        /* 11 */
+
+    NOT_ON_TIMER,
+    TIMER4A,        /* 13 */
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+};
+
+const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
+    7,  // A0               PF7                 ADC7
+    6,  // A1               PF6                 ADC6
+    5,  // A2               PF5                 ADC5
+    4,  // A3               PF4                 ADC4
+    1,  // A4               PF1                 ADC1
+    0,  // A5               PF0                 ADC0
+    8,  // A6       D4      PD4                 ADC8
+    10, // A7       D6      PD7                 ADC10
+    11, // A8       D8      PB4                 ADC11
+    12, // A9       D9      PB5                 ADC12
+    13, // A10      D10     PB6                 ADC13
+    9   // A11      D12     PD6                 ADC9
+};
+
+#endif /* ARDUINO_MAIN */
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR        Serial
+#define SERIAL_PORT_USBVIRTUAL     Serial
+#define SERIAL_PORT_HARDWARE       Serial1
+#define SERIAL_PORT_HARDWARE_OPEN  Serial1
+
+#endif /* Pins_Arduino_h */

keyboards/nyquist/readme.md

@@ -0,0 +1,167 @@
+The Nyquist Keyboard
+====================
+
+The Nyquist is a 60% split ortholinear board by [Keebio](https://keeb.io). It has been designed in a similar manner to the Let's Split v2 by /u/wootpatoot. Each half of the keyboard is arranged in a 5x6 grid. There is an option to use a 2u key with PCB mounted MX stablizers, in place of the two innermost 1u keys on the bottom row.
+
+
+## Build Guide
+
+Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide)
+
+There is additional information there about flashing and adding RGB underglow.
+
+## First Time Setup
+
+Download or clone the whole firmware and navigate to the keyboards/nyquist directory. Once your development environment is setup, you'll be able to generate the default .hex using:
+
+```
+$ make serial
+```
+
+You will see a lot of output and if everything worked correctly you will see the built hex file:
+
+```
+nyquist_rev1_serial.hex
+```
+
+If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so:
+
+
+```
+$ make YOUR_KEYMAP_NAME
+```
+
+If everything worked correctly you will see a file:
+
+```
+nyquist_rev1_YOUR_KEYMAP_NAME.hex
+```
+
+For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md.
+
+Features
+--------
+
+For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
+
+Some features supported by the firmware:
+
+* Either half can connect to the computer via USB, or both halves can be used
+  independently.
+* You only need 3 wires to connect the two halves. Two for VCC and GND and one
+  for serial communication.
+* Optional support for I2C connection between the two halves if for some
+  reason you require a faster connection between the two halves. Note this
+  requires an extra wire between halves and pull-up resistors on the data lines.
+
+### 2u Support
+In place of the two innermost 1u keys on the bottom row, a single 2u key can be used. If you choose to use this option, then in your keymap, set the innermost key on the bottom row to what you want the 2u key to be. For example, if using the 2u key on the left half of the board, set the keycode for the lower right key.
+
+Required Hardware
+-----------------
+
+Apart from diodes and key switches for the keyboard matrix in each half, you
+will need:
+
+* 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each.
+* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
+
+Alternatively, you can use any sort of cable and socket that has at least 3
+wires. If you want to use I2C to communicate between halves, you will need a
+cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
+
+Optional Hardware
+-----------------
+
+A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
+
+Wiring
+------
+
+The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
+PD0 on the ATmega32u4) between the two Pro Micros.
+
+Then wire your key matrix to any of the remaining 17 IO pins of the pro micro
+and modify the `matrix.c` accordingly.
+
+The wiring for serial:
+
+![serial wiring](imgs/split-keyboard-serial-schematic.png)
+
+The wiring for i2c:
+
+![i2c wiring](imgs/split-keyboard-i2c-schematic.png)
+
+The pull-up resistors may be placed on either half. It is also possible
+to use 4 resistors and have the pull-ups in both halves, but this is
+unnecessary in simple use cases.
+
+Flashing
+-------
+From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+Example: `make rev1-serial-avrdude`
+
+
+Choosing which board to plug the USB cable into (choosing Master)
+--------
+Because the two boards are identical, the firmware has logic to differentiate the left and right board.
+
+It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable.
+
+The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
+
+The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
+
+### Setting the left hand as master
+If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
+
+### Setting the right hand as master
+If you always plug the usb cable into the right board, add an extra flag to your `config.h`
+```
+ #define MASTER_RIGHT
+```
+
+### Setting EE_hands to use either hands as master
+If you define `EE_HANDS` in your `config.h`, you will need to set the
+EEPROM for the left and right halves.
+
+The EEPROM is used to store whether the
+half is left handed or right handed. This makes it so that the same firmware
+file will run on both hands instead of having to flash left and right handed
+versions of the firmware to each half. To flash the EEPROM file for the left
+half run:
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
+// or the equivalent in dfu-programmer
+
+```
+and similarly for right half
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
+// or the equivalent in dfu-programmer
+```
+
+NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
+
+After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
+
+Note that you need to program both halves, but you have the option of using
+different keymaps for each half. You could program the left half with a QWERTY
+layout and the right half with a Colemak layout using bootmagic's default layout option.
+Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
+right half is connected.
+
+
+Notes on Using Pro Micro 3.3V
+-----------------------------
+
+Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
+the frequency on the 3.3V board.
+
+Also, if the slave board is producing weird characters in certain columns,
+update the following line in `matrix.c` to the following:
+
+```
+// _delay_us(30);  // without this wait read unstable value.
+_delay_us(300);  // without this wait read unstable value.
+```

keyboards/nyquist/rev1/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/nyquist/rev1/config.h

@@ -0,0 +1,89 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCEEB
+#define PRODUCT_ID      0x1156
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Keebio
+#define PRODUCT         The Nyquist Keyboard
+#define DESCRIPTION     Split 60 percent ortholinear keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
+
+#define CATERINA_BOOTLOADER
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 16    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/nyquist/rev1/rev1.c

@@ -0,0 +1,39 @@
+#include "nyquist.h"
+
+#ifdef AUDIO_ENABLE
+    float tone_startup[][2] = SONG(STARTUP_SOUND);
+    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+    #ifdef AUDIO_ENABLE
+        _delay_ms(20); // gets rid of tick
+        PLAY_NOTE_ARRAY(tone_startup, false, 0);
+    #endif
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};
+
+void shutdown_user(void) {
+    #ifdef AUDIO_ENABLE
+        PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+	_delay_ms(150);
+	stop_all_notes();
+    #endif
+}

keyboards/nyquist/rev1/rev1.h

@@ -0,0 +1,66 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "../nyquist.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#ifndef FLIP_HALF
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define KEYMAP( \
+	L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+	L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+	L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
+    L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ L30, L31, L32, L33, L34, L35 }, \
+		{ L40, L41, L42, L43, L44, L45 }, \
+		{ R05, R04, R03, R02, R01, R00 }, \
+		{ R15, R14, R13, R12, R11, R10 }, \
+		{ R25, R24, R23, R22, R21, R20 }, \
+		{ R35, R34, R33, R32, R31, R30 }, \
+		{ R45, R44, R43, R42, R41, R40 } \
+	}
+#else
+// Keymap with right side flipped
+// (TRRS jack on both halves are to the right)
+#define KEYMAP( \
+	L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+	L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+	L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
+    L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ L30, L31, L32, L33, L34, L35 }, \
+		{ L40, L41, L42, L43, L44, L45 }, \
+		{ R00, R01, R02, R03, R04, R05 }, \
+		{ R10, R11, R12, R13, R14, R15 }, \
+		{ R20, R21, R22, R23, R24, R25 }, \
+		{ R30, R31, R32, R33, R34, R35 }, \
+		{ R40, R41, R42, R43, R44, R45 } \
+	}
+#endif
+
+#endif

keyboards/nyquist/rev1/rules.mk

@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif

keyboards/nyquist/rules.mk

@@ -0,0 +1,87 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SUBPROJECT_rev1 ?= yes
+USE_I2C ?= yes
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+
+avrdude: build
+	ls /dev/tty* > /tmp/1; \
+	echo "Reset your Pro Micro now"; \
+	while [[ -z $$USB ]]; do \
+	  sleep 1; \
+	  ls /dev/tty* > /tmp/2; \
+	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+	done; \
+	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+.PHONY: avrdude

keyboards/nyquist/serial.c

@@ -0,0 +1,228 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifdef USE_SERIAL
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < 8; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 8;
+  serial_output();
+  while( b-- ) {
+    if(data & (1 << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += serial_master_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  uint8_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif

keyboards/nyquist/serial.h

@@ -0,0 +1,26 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif

keyboards/nyquist/split_util.c

@@ -0,0 +1,84 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+#endif
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        keyboard_slave_loop();
+    }
+}

keyboards/nyquist/split_util.h

@@ -0,0 +1,24 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+
+#ifdef EE_HANDS
+	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
+	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
+#endif
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif

keyboards/planck/keymaps/ab/keyboard-layout.json

@@ -57,12 +57,12 @@
     {
       "f": 3
     },
-    "\n{\n\n\n\n\n\n\n\nH",
+    "\\\n\n\n\n\n\n\n\n\nH",
     {
       "c": "#c4bcbc",
       "f": 3
     },
-    "\n}\n\n\n\n\n\n\n\nJ",
+    "|\n\n\n\n\n\n\n\n\nJ",
     {
       "c": "#cccccc",
       "a": 7,
@@ -79,13 +79,13 @@
     },
     ";\n\n:",
     {
-      "a": 7,
       "f": 3
     },
-    "Enter"
+    "'\n\n\""
   ],
   [
     {
+      "a": 7,
       "f": 3
     },
     "Shift",
@@ -103,6 +103,22 @@
     "C",
     {
       "a": 4,
+      "fa": [
+        2,
+        2,
+        0,
+        2,
+        0,
+        0,
+        0,
+        0,
+        0,
+        2
+      ]
+    },
+    "\n[\n\n\n\n\n\n\n\nV",
+    "\n]\n\n\n\n\n\n\n\nB",
+    {
       "fa": [
         0,
         2,
@@ -116,10 +132,8 @@
         2
       ]
     },
-    "\\\n[\n\n\n\n\n\n\n\nV",
-    "|\n]\n\n\n\n\n\n\n\nB",
-    "`\n'\n\n\n\n\n\n\n\nN",
-    "~\n\"\n\n\n\n\n\n\n\nM",
+    "`\n{\n\n\n\n\n\n\n\nN",
+    "~\n}\n\n\n\n\n\n\n\nM",
     {
       "a": 6
     },
@@ -129,7 +143,7 @@
     {
       "a": 7
     },
-    "Shift\n\n\n\nEnter"
+    "Shift ↵"
   ],
   [
     {

keyboards/planck/keymaps/ab/keymap.c

@@ -56,20 +56,20 @@ const uint16_t PROGMEM fn_actions[] = {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_QWERTY] = { /* QWERTY */
     {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
-    {KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT},
+    {KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
     {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT},
     {KC_LCTL, KC_ESC,  KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
 },
 [_LOWER] = { /* LOWER */
     {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL},
-    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
-    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
     {BL,      ZM_NRM,  ZM_IN,   ZM_OUT,  KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
 },
 [_RAISE] = { /* RAISE */
     {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12},
-    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS},
-    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV,  KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_GRV,  KC_TILD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
     {RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, EM_UNDO, KC_VOLD, KC_VOLU, KC_MUTE}
 },
 [_CUSTOM] = { /* CUSTOM */

keyboards/planck/keymaps/ab/readme.md

@@ -4,7 +4,7 @@ A practical keymap that emulates standard QWERTY keyboard for Planck. Once you g
 ![Layout](keyboard-layout.png "Practical Keymap")
 ![Photo](keyboard-photo.jpg "Planck Keyboard")
 
-* Online keyboard layout editor: http://goo.gl/mlLAFZ
+* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/bda299020baaafe6a2a4a82e615e3cfc
 
 # Programming Instructions:
 Enter into programming mode and run the following command.

keyboards/planck/keymaps/dshields/Makefile

@@ -4,6 +4,7 @@ endif
 
 MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
 COMMAND_ENABLE   = yes # Commands for debug and configuration
+CONSOLE_ENABLE   = yes # Console for debug(+400)
 BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend

keyboards/planck/keymaps/dshields/config.h

@@ -6,26 +6,47 @@
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
 
-#define ONESHOT_TAP_TOGGLE      2
-#define ONESHOT_TIMEOUT         500
+#define USB_MAX_POWER_CONSUMPTION 100
+#define ONESHOT_TAP_TOGGLE        2
+#define ONESHOT_TIMEOUT           500
 
-#define MOUSEKEY_INTERVAL       20
-#define MOUSEKEY_DELAY          0
-#define MOUSEKEY_TIME_TO_MAX    60
-#define MOUSEKEY_MAX_SPEED      7
-#define MOUSEKEY_WHEEL_DELAY    0
+#define MOUSEKEY_INTERVAL         20
+#define MOUSEKEY_DELAY            0
+#define MOUSEKEY_TIME_TO_MAX      40
+#define MOUSEKEY_MAX_SPEED        7
+#define MOUSEKEY_WHEEL_DELAY      0
 
+// dynamic macro keys
 #define DM_PLAY DYN_MACRO_PLAY1
 #define DM_STRT DYN_REC_START1
 #define DM_STOP DYN_REC_STOP
 
+// one-shot layer keys
 #define OSL_RSE OSL(RSE)
 #define OSL_LWR OSL(LWR)
 #define OSL_FUN OSL(FUN)
 
+// one-shot modifier keys
 #define OSM_CTL OSM(MOD_LCTL)
 #define OSM_ALT OSM(MOD_LALT)
 #define OSM_SFT OSM(MOD_LSFT)
 
+// tap dance keys
+#define TD_SCLN TD(TDK_SCLN)
+#define TD_COMM TD(TDK_COMM)
+#define TD_DOT  TD(TDK_DOT)
+#define TD_SLSH TD(TDK_SLSH)
+
+#define ACTION_TAP_DANCE_FN_KEYCODE(user_fn, kc) {  \
+    .fn = { NULL, user_fn, NULL }, \
+    .user_data = (void *)&((qk_tap_dance_pair_t) { kc, 0 }) \
+}
+
+#define ACTION_TAP_DANCE_FN_KEYCODE2(user_fn, kc1, kc2) {  \
+    .fn = { NULL, user_fn, NULL }, \
+    .user_data = (void *)&((qk_tap_dance_pair_t) { kc1, kc2 }) \
+}
+
+
 #endif
 

keyboards/planck/keymaps/dshields/keymap.c

@@ -8,7 +8,7 @@ extern keymap_config_t keymap_config;
 
 enum planck_layers { DEF, LWR, RSE, FUN };
 enum planck_keycodes { DYNAMIC_MACRO_RANGE = SAFE_RANGE };
-enum tap_dance_keys { TD_SCLN };
+enum tap_dance_keys { TDK_SCLN, TDK_COMM, TDK_DOT, TDK_SLSH };
 
 #include "dynamic_macro.h"
 
@@ -26,8 +26,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      */
     [DEF] = {
         {KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_ESC,  KC_BSPC, KC_Y,    KC_U,    KC_I,    KC_O,   KC_P},
-        {KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_TAB,  KC_ENT,  KC_H,    KC_J,    KC_K,    KC_L,   TD(TD_SCLN)},
-        {KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    OSM_SFT, DM_PLAY, KC_N,    KC_M,    KC_COMM, KC_DOT, KC_SLSH},
+        {KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_TAB,  KC_ENT,  KC_H,    KC_J,    KC_K,    KC_L,   TD_SCLN},
+        {KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    OSM_SFT, DM_PLAY, KC_N,    KC_M,    TD_COMM, TD_DOT, TD_SLSH},
         {OSM_CTL, KC_LGUI, OSM_ALT, OSL_FUN, OSL_LWR, KC_SPC,  KC_SPC,  OSL_RSE, KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT}
     },
     /* Lower
@@ -42,10 +42,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------------------------------'
      */
     [LWR] = {
-        {KC_EXLM,   KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR,  KC_LPRN,    KC_RPRN},
-        {S(KC_GRV), _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, _______,  S(KC_LBRC), S(KC_RBRC)},
-        {_______,   _______, _______, _______, _______, _______, _______, _______, _______, _______,  S(KC_QUOT), S(KC_BSLS)},
-        {_______,   _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN,  KC_PGUP,    KC_END}
+        {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
+        {KC_TILD, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, _______, KC_LCBR, KC_RCBR},
+        {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DQUO, KC_PIPE},
+        {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END}
     },
     /* Raise
      * ,-----------------------------------------------------------------------------------.
@@ -59,10 +59,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------------------------------'
      */
     [RSE] = {
-        {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, KC_6,    KC_7,    KC_8,     KC_9,    KC_0},
-        {KC_GRV,  _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  _______,  KC_LBRC, KC_RBRC},
-        {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  KC_QUOT, KC_BSLS},
-        {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN,  KC_PGUP, KC_END}
+        {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0},
+        {KC_GRV,  _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  _______, KC_LBRC, KC_RBRC},
+        {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_QUOT, KC_BSLS},
+        {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END}
     },
     /* Function
      * ,-----------------------------------------------------------------------------------.
@@ -84,8 +84,39 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
+void tap(uint16_t keycode) {
+    register_code16(keycode);
+    unregister_code16(keycode);
+};
+
+void tap_dance_triple(qk_tap_dance_state_t *state, void *user_data) {
+    qk_tap_dance_pair_t *pair = (qk_tap_dance_pair_t *)user_data;
+    uint16_t keycode = pair->kc1;
+
+    switch(state->count) {
+        case 2:
+            register_code(KC_LSFT);
+            tap(keycode);
+            unregister_code(KC_LSFT);
+            break;
+        case 3:
+            if (pair->kc2) {
+                keycode = pair->kc2;
+            }
+            tap(keycode);
+            tap(keycode);
+            break;
+        default:
+            tap(keycode);
+            break;
+    }
+}
+
 qk_tap_dance_action_t tap_dance_actions[] = {
-    [TD_SCLN]  = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, S(KC_SCLN))  // once for semi-colon, twice for colon
+    [TDK_SCLN]  = ACTION_TAP_DANCE_FN_KEYCODE2(tap_dance_triple, KC_SCLN, KC_COLN),
+    [TDK_COMM]  = ACTION_TAP_DANCE_FN_KEYCODE (tap_dance_triple, KC_COMM),
+    [TDK_DOT]   = ACTION_TAP_DANCE_FN_KEYCODE (tap_dance_triple, KC_DOT),
+    [TDK_SLSH]  = ACTION_TAP_DANCE_FN_KEYCODE (tap_dance_triple, KC_SLSH)
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {

keyboards/planck/keymaps/originerd/Makefile

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/planck/keymaps/originerd/keymap.c

@@ -0,0 +1,195 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum planck_layers {
+  _NERD,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  NERD = SAFE_RANGE,
+  LOWER,
+  RAISE
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* NERD
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | DEL  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_NERD] = {
+  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT },
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT},
+  {KC_DEL,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC},
+  {KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_BSLS},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  '   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_QUOT},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap| NERD |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL },
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, NERD,    _______, _______, _______, _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_nerd[][2]       = SONG(QWERTY_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case NERD:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_nerd, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_NERD);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif

keyboards/planck/keymaps/originerd/readme.md

@@ -0,0 +1,58 @@
+# The Originerd Planck Layout
+- MIT Layout
+
+## Nerd - Qwerty
+
+```
+,-----------------------------------------------------------------------------------.
+| Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |Enter |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Shift |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| DEL  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+`-----------------------------------------------------------------------------------'
+```
+
+## Lower
+
+```
+,-----------------------------------------------------------------------------------.
+|   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  \   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+`-----------------------------------------------------------------------------------'
+```
+
+## Upper Layer
+
+```
+,-----------------------------------------------------------------------------------.
+|   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  '   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+`-----------------------------------------------------------------------------------'
+```
+
+## Adjust
+
+```
+,-----------------------------------------------------------------------------------.
+|      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      |      |      |Aud on|Audoff|AGnorm|AGswap| NERD |      |      |      |      |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      |      |      |      |      |
+`-----------------------------------------------------------------------------------'
+```

quantum/dynamic_macro.h

@@ -274,6 +274,10 @@ bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record)
                 macro_id = 0;
             }
             return false;
+        case DYN_MACRO_PLAY1:
+        case DYN_MACRO_PLAY2:
+            dprintln("dynamic macro: ignoring macro play key while recording");
+            return false;
         default:
             /* Store the key in the macro buffer and process it normally. */
             switch (macro_id) {

readme.md

@@ -28,4 +28,4 @@ QMK is developed and maintained by Jack Humbert of OLKB with contributions from
 
 ## Documentation
 
-[https://docs.qmk.fm](https://docs.qmk.fm) is hosted on [Gitbook](https://www.gitbook.com/book/qmk/firmware/details) and [Github](https://github.com/qmk/qmk_firmware_docs/) (they are synced). You can request changes by making a fork and [pull request](https://github.com/qmk/qmk_firmware_docs/pulls), or by clicking the "suggest an edit" link on any page of the Docs.
+[https://docs.qmk.fm](https://docs.qmk.fm) is hosted on [Gitbook](https://www.gitbook.com/book/qmk/firmware/details) and [Github](/docs/) (they are synced). You can request changes by making a fork and [pull request](https://github.com/qmk/qmk_firmware/pulls), or by clicking the "suggest an edit" link on any page of the Docs.

tmk_core/common/action_tapping.c

@@ -96,7 +96,7 @@ bool process_tapping(keyrecord_t *keyp)
                     // enqueue
                     return false;
                 }
-#if TAPPING_TERM >= 500
+#if TAPPING_TERM >= 500 || defined PERMISSIVE_HOLD
                 /* Process a key typed within TAPPING_TERM
                  * This can register the key before settlement of tapping,
                  * useful for long TAPPING_TERM but may prevent fast typing.