RAMA U80-A, wilba.tech WT60-A, WT65-A, WT80-A, IS31FL3736 driver (#3925)

* Initial commit of RAMA U80-A

* Initial commit of RAMA U80-A

* Moved IS31FL3736 driver, minor cleanups

* Superficial stuff

* Review changes

* Refactored to use common code.

common_features.mk

@@ -114,37 +114,35 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
+RGB_MATRIX_ENABLE ?= no
+VALID_MATRIX_TYPES := yes IS31FL3731L IS31FL3733L custom
+ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
+ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
+    $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
+endif
     OPT_DEFS += -DRGB_MATRIX_ENABLE
-    OPT_DEFS += -DIS31FL3731
-    COMMON_VPATH += $(DRIVER_PATH)/issi
-    SRC += is31fl3731.c
-    SRC += i2c_master.c
     SRC += $(QUANTUM_DIR)/color.c
     SRC += $(QUANTUM_DIR)/rgb_matrix.c
+    SRC += $(QUANTUM_DIR)/rgb_matrix_drivers.c
     CIE1931_CURVE = yes
 endif
 
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
+	RGB_MATRIX_ENABLE = IS31FL3731
+endif
+
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
-    OPT_DEFS += -DRGB_MATRIX_ENABLE
     OPT_DEFS += -DIS31FL3731
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3731.c
     SRC += i2c_master.c
-    SRC += $(QUANTUM_DIR)/color.c
-    SRC += $(QUANTUM_DIR)/rgb_matrix.c
-    CIE1931_CURVE = yes
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
-    OPT_DEFS += -DRGB_MATRIX_ENABLE
     OPT_DEFS += -DIS31FL3733
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3733.c
     SRC += i2c_master.c
-    SRC += $(QUANTUM_DIR)/color.c
-    SRC += $(QUANTUM_DIR)/rgb_matrix.c
-    CIE1931_CURVE = yes
 endif
 
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)

drivers/issi/is31fl3731.c

@@ -268,4 +268,3 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
         }
     }
 }
-

drivers/issi/is31fl3733.c

@@ -24,10 +24,10 @@
 #include "wait.h"
 #endif
 
-#include "is31fl3733.h"
 #include <string.h>
 #include "i2c_master.h"
 #include "progmem.h"
+#include "rgb_matrix.h"
 
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
@@ -250,4 +250,3 @@ void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
         }
     }
 }
-

drivers/issi/is31fl3736.c

@@ -0,0 +1,306 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include "is31fl3736.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+
+
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
+#define ISSI_PAGE_PWM 0x01        //PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
+#define ISSI_PAGE_FUNCTION 0x03   //PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 //PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
+#define ISSI_REG_RESET 0x11// PG3
+#define ISSI_REG_SWPULLUP 0x0F //PG3
+#define ISSI_REG_CSPULLUP 0x10 //PG3
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3736 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3736_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
+bool g_led_control_registers_update_required = false;
+
+void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes PG1 is already selected
+
+    // transmit PWM registers in 12 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 192; i += 16 ) {
+        g_twi_transfer_buffer[0] = i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3736_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG0
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    // Turn off all LEDs.
+    for ( int i = 0x00; i <= 0x17; i++ )
+    {
+        IS31FL3736_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG1
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    // Set PWM on all LEDs to 0
+    // No need to setup Breath registers to PWM as that is the default.
+    for ( int i = 0x00; i <= 0xBF; i++ )
+    {
+        IS31FL3736_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG3
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    // Set global current to maximum.
+    IS31FL3736_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    // Disable software shutdown.
+    IS31FL3736_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+
+    // Wait 10ms to ensure the device has woken up.
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+}
+
+void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        g_pwm_buffer[led.driver][led.r] = red;
+        g_pwm_buffer[led.driver][led.g] = green;
+        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31FL3736_set_color( i, red, green, blue );
+    }
+}
+
+void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+    // IS31FL3733
+    // The PWM register for a matrix position (0x00 to 0xBF) can be
+    // divided by 8 to get the LED control register (0x00 to 0x17),
+    // then mod 8 to get the bit position within that register.
+
+    // IS31FL3736
+    // The PWM register for a matrix position (0x00 to 0xBF) is interleaved, so:
+    // A1=0x00 A2=0x02 A3=0x04 A4=0x06 A5=0x08 A6=0x0A A7=0x0C A8=0x0E
+    // B1=0x10 B2=0x12 B3=0x14
+    // But also, the LED control registers (0x00 to 0x17) are also interleaved, so:
+    // A1-A4=0x00 A5-A8=0x01
+    // So, the same math applies.
+
+	uint8_t control_register_r = led.r / 8;
+	uint8_t control_register_g = led.g / 8;
+	uint8_t control_register_b = led.b / 8;
+
+	uint8_t bit_r = led.r % 8;
+	uint8_t bit_g = led.g % 8;
+	uint8_t bit_b = led.b % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3736_mono_set_brightness( int index, uint8_t value )
+{
+    if ( index >= 0 && index < 96 ) {
+    	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+    	// Map index 0..95 to registers 0x00..0xBE (interleaved)
+    	uint8_t pwm_register = index * 2;
+        g_pwm_buffer[0][pwm_register] = value;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3736_mono_set_brightness_all( uint8_t value )
+{
+    for ( int i = 0; i < 96; i++ )
+    {
+    	IS31FL3736_mono_set_brightness( i, value );
+    }
+}
+
+void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled )
+{
+	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+
+	// Map index 0..95 to registers 0x00..0xBE (interleaved)
+	uint8_t pwm_register = index * 2;
+	// Map register 0x00..0xBE (interleaved) into control register and bit
+	uint8_t control_register = pwm_register / 8;
+	uint8_t bit = pwm_register % 8;
+
+    if ( enabled ) {
+        g_led_control_registers[0][control_register] |= (1 << bit);
+    } else {
+        g_led_control_registers[0][control_register] &= ~(1 << bit);
+    }
+
+    g_led_control_registers_update_required = true;
+}
+
+void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG1
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+
+        IS31FL3736_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        //IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG0
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        for ( int i=0; i<24; i++ )
+        {
+            IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i] );
+            //IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}
+

drivers/issi/is31fl3736.h

@@ -0,0 +1,172 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+
+// Simple interface option.
+// If these aren't defined, just define them to make it compile
+
+
+#ifndef DRIVER_COUNT
+#define DRIVER_COUNT 2
+#endif
+
+#ifndef DRIVER_LED_TOTAL
+#define DRIVER_LED_TOTAL 96
+#endif
+
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3736_init( uint8_t addr );
+void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+void IS31FL3736_mono_set_brightness( int index, uint8_t value );
+void IS31FL3736_mono_set_brightness_all( uint8_t value );
+void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define A_1  0x00
+#define A_2  0x02
+#define A_3  0x04
+#define A_4  0x06
+#define A_5  0x08
+#define A_6  0x0A
+#define A_7  0x0C
+#define A_8  0x0E
+
+#define B_1  0x10
+#define B_2  0x12
+#define B_3  0x14
+#define B_4  0x16
+#define B_5  0x18
+#define B_6  0x1A
+#define B_7  0x1C
+#define B_8  0x1E
+
+#define C_1  0x20
+#define C_2  0x22
+#define C_3  0x24
+#define C_4  0x26
+#define C_5  0x28
+#define C_6  0x2A
+#define C_7  0x2C
+#define C_8  0x2E
+
+#define D_1  0x30
+#define D_2  0x32
+#define D_3  0x34
+#define D_4  0x36
+#define D_5  0x38
+#define D_6  0x3A
+#define D_7  0x3C
+#define D_8  0x3E
+
+#define E_1  0x40
+#define E_2  0x42
+#define E_3  0x44
+#define E_4  0x46
+#define E_5  0x48
+#define E_6  0x4A
+#define E_7  0x4C
+#define E_8  0x4E
+
+#define F_1  0x50
+#define F_2  0x52
+#define F_3  0x54
+#define F_4  0x56
+#define F_5  0x58
+#define F_6  0x5A
+#define F_7  0x5C
+#define F_8  0x5E
+
+#define G_1  0x60
+#define G_2  0x62
+#define G_3  0x64
+#define G_4  0x66
+#define G_5  0x68
+#define G_6  0x6A
+#define G_7  0x6C
+#define G_8  0x6E
+
+#define H_1  0x70
+#define H_2  0x72
+#define H_3  0x74
+#define H_4  0x76
+#define H_5  0x78
+#define H_6  0x7A
+#define H_7  0x7C
+#define H_8  0x7E
+
+#define I_1  0x80
+#define I_2  0x82
+#define I_3  0x84
+#define I_4  0x86
+#define I_5  0x88
+#define I_6  0x8A
+#define I_7  0x8C
+#define I_8  0x8E
+
+#define J_1  0x90
+#define J_2  0x92
+#define J_3  0x94
+#define J_4  0x96
+#define J_5  0x98
+#define J_6  0x9A
+#define J_7  0x9C
+#define J_8  0x9E
+
+#define K_1  0xA0
+#define K_2  0xA2
+#define K_3  0xA4
+#define K_4  0xA6
+#define K_5  0xA8
+#define K_6  0xAA
+#define K_7  0xAC
+#define K_8  0xAE
+
+#define L_1  0xB0
+#define L_2  0xB2
+#define L_3  0xB4
+#define L_4  0xB6
+#define L_5  0xB8
+#define L_6  0xBA
+#define L_7  0xBC
+#define L_8  0xBE
+

keyboards/crkbd/info.json

@@ -1,5 +1,5 @@
 {
-  "keyboard_name": "crkbd (helidox) rev. 1",
+  "keyboard_name": "crkbd rev. 1",
   "url": "",
   "maintainer": "qmk",
   "width": 15,

keyboards/ergo42/keymaps/koba/config.h

@@ -0,0 +1,33 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+

keyboards/ergo42/keymaps/koba/keymap.c

@@ -0,0 +1,128 @@
+/* Copyright 2018 Daisuke Kobayashi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+enum {
+  _WIN,
+  _MACOS,
+  _LOWER,
+  _RAISE,
+  _FUNC
+};
+
+#define KC_KNA  KC_LANG1
+#define KC_EISU KC_LANG2
+#define LOWER   MO(_LOWER)
+#define RAISE   MO(_RAISE)
+#define FN      MO(_FUNC)
+#define WIN     DF(_WIN)
+#define MACOS   DF(_MACOS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* WIN
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * | Esc  | Tab  |   Q  |   W  |   E  |   R  |   T  |   |   Y  |   U  |   I  |   O  |   P  |  @ ` | Bksp |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * | Del  | Ctrl |   A  |   S  |   D  |   F  |   G  |   |   H  |   J  |   K  |   L  |  ; + |  ; * |Enter |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * | H/Z  |Shift |   Z  |   X  |   C  |   V  |   B  |   |   N  |   M  |  , < |  . > |  / ? |  Up  |Shift |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |  Fn  | Ctrl | Win  | Alt  | Mhen |LOWER |Space |   |Space |RAISE | Henk | Menu | Left | Down |Right |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_WIN] = LAYOUT( \
+    KC_ESC,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    JP_AT,   KC_BSPC, \
+    KC_DELT, KC_RCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, JP_COLN, KC_ENT,  \
+    KC_ZKHK, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,     KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   KC_RSFT, \
+    FN,      KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, LOWER,   KC_SPC,   KC_SPC,  RAISE,   KC_HENK, KC_APP,  KC_LEFT, KC_DOWN, KC_RGHT  \
+  ),
+
+  /* MACOS
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * | Esc  | Tab  |   Q  |   W  |   E  |   R  |   T  |   |   Y  |   U  |   I  |   O  |   P  |  @ ` | Bksp |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * | Del  | Ctrl |   A  |   S  |   D  |   F  |   G  |   |   H  |   J  |   K  |   L  |  ; + |  ; * |Enter |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * | Caps |Shift |   Z  |   X  |   C  |   V  |   B  |   |   N  |   M  |  , < |  . > |  / ? |  Up  |Shift |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |  Fn  | Ctrl | Opt  | Cmd  | Eisu |LOWER |Space |   |Space |RAISE | Kana | Cmd  | Left | Down |Right |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_MACOS] = LAYOUT( \
+    KC_ESC,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    JP_AT,   KC_BSPC, \
+    KC_DELT, KC_RCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, JP_COLN, KC_ENT,  \
+    KC_CAPS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,     KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   KC_RSFT, \
+    FN,      KC_LCTL, KC_LALT, KC_LGUI, KC_EISU, LOWER,   KC_SPC,   KC_SPC,  RAISE,   KC_KNA,  KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT  \
+  ),
+
+  /* LOWER
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * |      |      |   !  |   "  |   #  |   $  |   %  |   |   &  |   '  |   (  |   )  |      |   =  |      |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * |      |      | XXXX | XXXX | XXXX |   {  |   (  |   |   )  |   }  | XXXX |   ~  |   |  |   _  |      |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * |      |      | XXXX | XXXX | XXXX | XXXX | XXXX |   | XXXX | XXXX | XXXX | XXXX | XXXX | PgUp |      |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |   |      |      |      |      | Home | PgDn | End  |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT( \
+    _______, _______, S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5),  S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), JP_EQL,  _______, \
+    _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, JP_LCBR, JP_LPRN,  JP_RPRN, JP_RCBR, XXXXXXX, JP_TILD, JP_PIPE, JP_UNDS, _______, \
+    _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, _______, \
+    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END   \
+  ),
+
+  /* RAISE
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * |      |      |   1  |   2  |   3  |   4  |   5  |   |   6  |   7  |   8  |   9  |   0  |   -  |      |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * |      |      | F11  | F12  | XXXX |   [  |   (  |   |   )  |   ]  | XXXX |   ^  |   \  |   \  |      |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * |      |      |  F1  |  F2  |  F3  |  F4  |  F5  |   |  F6  |  F7  |  F8  |  F9  | F10  |      |      |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |   |      |      |      |      |      |      |      |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_RAISE] = LAYOUT( \
+    _______, _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,     KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, _______, \
+    _______, _______, KC_F11,  KC_F12,  XXXXXXX, JP_LBRC, JP_LPRN,  JP_RPRN, JP_RBRC, XXXXXXX, JP_CIRC, KC_JYEN, KC_RO,   _______, \
+    _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______  \
+  ),
+
+  /* FUNC
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * |Reset |      | XXXX | XXXX | XXXX | XXXX | XXXX |   |PrtSc |SLock |Pause | XXXX | XXXX | XXXX |      |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * |      |      | XXXX | XXXX | XXXX | XXXX | >Win |   | Ins  | XXXX | XXXX | XXXX | XXXX | XXXX |      |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * |      |      | XXXX | XXXX | XXXX | XXXX | >Mac |   | XXXX | XXXX | XXXX | XXXX | XXXX | Vol+ |      |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |   |      |      |      |      |      | Vol- | Play |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_FUNC] = LAYOUT( \
+    RESET,   _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, XXXXXXX, _______, \
+    _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, WIN,      KC_INS,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, \
+    _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MACOS,    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, _______, \
+    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, XXXXXXX, KC_VOLD, KC_MPLY  \
+  )
+};
+

keyboards/ergo42/keymaps/koba/readme.md

@@ -0,0 +1,57 @@
+# Keymap for Ergo42
+
+## About
+
+This keymap is for Ergo42.
+
+- JIS layout.
+- Independent Windows layout/MacOS layout layers.
+- Bottom row keys arranged like a standard keyboard.
+- Arrow keys are designed in the inverted-T.
+
+## Layout
+
+![keyboard-layout](https://user-images.githubusercontent.com/1042121/45888288-aa35ed00-bdf8-11e8-8741-71fe9a0fadc6.png)
+
+## Windows mode/MacOS mode
+
+|mode        |key         |
+|------------|------------|
+|Windows mode|Function + g|
+|MacOS mode  |Function + b|
+
+When switching mode, the following keys switches.
+
+|Windows        |MacOS       |
+|---------------|------------|
+|Alt            |Command(GUI)|
+|Windows(GUI)   |Option(Alt) |
+|Menu(App)      |Command(GUI)|
+|Muhenkan       |Eisu        |
+|Henkan         |Kana        |
+|Hankaku/Zenkaku|Caps        |
+
+## Layers
+
+|No.|Name    |Description                |
+|---|--------|---------------------------|
+| 4 |Function|Mode switch, Media         |
+| 3 |Raise   |Number, Function           |
+| 2 |Lower   |Symbol, Home/End, PgUp/PgDn|
+| 1 |MacOS   |MacOS layout               |
+| 0 |Windows |Windows layout             |
+
+When power is turn on, No.0 Windows layer becomes enabled.
+
+## Windows/MacOS layers
+
+Standard layers for Windows mode/MacOS mode.
+
+## Raise/Lower layers
+
+Layer enabled during pressing Raise or Lower key.
+
+## Function layer
+
+Layer enabled during pressing Function key.
+

keyboards/ergo42/keymaps/koba/readme_ja.md

@@ -0,0 +1,62 @@
+# Keymap for Ergo42
+
+## 概要
+
+Ergo42 用キーマップです。
+
+- JIS 配列
+- 独立した Windows 配列/MacOS 配列レイヤー
+- 普通のキーボード配列に似せた最下段キー
+- 逆 T 字 (凸型) 配列の矢印キー
+
+## レイアウト
+
+![keyboard-layout](https://user-images.githubusercontent.com/1042121/45888288-aa35ed00-bdf8-11e8-8741-71fe9a0fadc6.png)
+
+## Windows モード/MacOS モード
+
+|モード        |キー        |
+|--------------|------------|
+|Windows モード|Function + g|
+|MacOS モード  |Function + b|
+
+モードを切り替えることで下記のキーが切り替わります。
+
+|Windows     |MacOS       |
+|------------|------------|
+|Alt         |Command(GUI)|
+|Windows(GUI)|Option(Alt) |
+|Menu(App)   |Command(GUI)|
+|無変換      |英数        |
+|変換        |かな        |
+|半角/全角   |Caps        |
+
+## レイヤー
+
+|No.|名称    |内容                      |
+|---|--------|--------------------------|
+| 4 |Function|モード切替, メディア      |
+| 3 |Raise   |数字, ファンクションキー  |
+| 2 |Lower   |記号, Home/End, PgUp/PgDn |
+| 1 |MacOS   |MacOS 配列                |
+| 0 |Windows |Windows 配列              |
+
+電源 ON により No.0 の Windows レイヤーが有効になります。
+
+## Windows/MacOS レイヤー
+
+Windows モード/MacOS モードの標準レイヤー。
+
+## Raise/Lower レイヤー
+
+Raise キーまたは Lower キーを押している間だけ有効になるレイヤー。
+
+普通のキーボードの最上段キー (数字/記号) に加えて、標準レイヤーに入らなかった記号キーが3つ (`[{`, `]}`, `\_`) 入っています。  
+括弧キー `[{`, `]}` は `(`, `)` を加えて、左右対称に配置しました。
+
+## Function レイヤー
+
+Function キーを押している間だけ有効になるレイヤー。
+
+Windows モード/MacOS モードの切り替え、メディア系の操作、標準レイヤーに入らなかった機能キーのレイヤーです。
+

keyboards/ergodox_ez/rules.mk

@@ -83,6 +83,6 @@ SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
 SLEEP_LED_ENABLE = no
 API_SYSEX_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGB_MATRIX_ENABLE = no // enable later
+RGB_MATRIX_ENABLE = no # enable later
 
 LAYOUTS = ergodox

keyboards/iris/keymaps/saviof/config.h

@@ -0,0 +1,39 @@
+/*
+Copyright 2018 Savio Fernandes
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+//#define USE_SERIAL
+#define USE_I2C
+
+/* Select hand configuration */
+
+//#define MASTER_LEFT
+#define MASTER_RIGHT
+// #define BACKLIGHT_BREATHING
+// #define EE_HANDS
+
+#define TAPPING_TERM 200
+
+// #undef RGBLED_NUM
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 30
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8

keyboards/iris/keymaps/saviof/keymap.c

@@ -0,0 +1,107 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJ 3
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJ,
+};
+
+//Tap Dance Declarations
+enum {
+  TD_SPC_ENT = 0
+};
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+    [TD_SPC_ENT] = ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)
+};
+
+#define KC_ KC_TRNS
+
+#define KC_LOWR LT(_LOWER, KC_LEFT) //LOWER
+#define KC_RASE LT(_RAISE, KC_RIGHT) //RAISE
+#define KC_ADJT LT(_ADJ, KC_LGUI) //RAISE
+#define KC_SCET TD(TD_SPC_ENT)
+#define KC_RST RESET
+#define KC_BL_S BL_STEP
+#define KC_DBUG DEBUG
+#define KC_RTOG RGB_TOG
+#define KC_RMOD RGB_MOD
+#define KC_LMOD RGB_RMOD
+#define KC_RHUI RGB_HUI
+#define KC_RHUD RGB_HUD
+#define KC_RSAI RGB_SAI
+#define KC_RSAD RGB_SAD
+#define KC_RVAI RGB_VAI
+#define KC_RVAD RGB_VAD
+#define KC_BTOG BL_TOGG
+#define KC_BLVL BL_STEP
+#define KC_BRTG BL_BRTG
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     ESC , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,DEL ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     LSFT, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     LCTL, Z  , X  , C  , V  , B  ,HOME,     END , N  , M  ,COMM,DOT ,SLSH,RSFT,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       ADJT,LOWR, SPC,         SCET,RASE, ENT
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_LOWER] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     TILD,EXLM, AT ,HASH, DLR,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     RST , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     DEL ,    ,LEFT,RGHT, UP ,LBRC,               RBRC, P4 , P5 , P6 ,PLUS,PIPE,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     BL_S,    ,    ,    ,DOWN,LCBR,LPRN,     RPRN,RCBR, P1 , P2 , P3 ,MINS,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,DEL ,         DEL ,    , P0
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_RAISE] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     F12 , F1 , F2 , F3 , F4 , F5 ,                F6 , F7 , F8 , F9 ,F10 ,F11 ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,EXLM, AT ,HASH,DLR ,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,MPRV,MNXT,VOLU,PGUP,UNDS,               EQL ,HOME,    ,    ,    ,BSLS,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     MUTE,MSTP,MPLY,VOLD,PGDN,MINS,    ,         ,PLUS,END ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_ADJ] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+         ,LMOD,    ,    ,    ,    ,                   ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     RTOG,RMOD,RHUI,RSAI,RVAI,    ,               BTOG,BLVL,BRTG,    ,    ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,DBUG,RHUD,RSAD,RVAD,    ,                   ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     BL_S,RST ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  )
+
+};

keyboards/iris/keymaps/saviof/rules.mk

@@ -0,0 +1,3 @@
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+TAP_DANCE_ENABLE=yes

keyboards/macropad/config.h

@@ -0,0 +1,224 @@
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Treasure
+#define PRODUCT         Macropad Type 9
+#define DESCRIPTION     A custom macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6, D7, C6 }
+#define MATRIX_COL_PINS { D1, D0, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 10
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/macropad/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "Macropad",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 3,
+  "height": 3,
+  "layouts": {
+      "LAYOUT": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}]
+      }
+  }
+}

keyboards/macropad/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/macropad/keymaps/default/keymap.c

@@ -0,0 +1,64 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_0,  KC_1, KC_2, \
+    KC_3,  KC_4, KC_5, \
+    KC_6,  KC_7, KC_8   \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/macropad/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for macropad

keyboards/macropad/macropad.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "macropad.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/macropad/macropad.h

@@ -0,0 +1,40 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef MACROPAD_H
+#define MACROPAD_H
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT(    \
+    K00, K01, K02, \
+    K10, K11, K12, \
+    K20, K21, K22  \
+) \
+{ \
+    { K00, K01, K02 }, \
+    { K10, K11, K12 }, \
+    { K20, K21, K22 }, \
+}
+
+#endif

keyboards/macropad/readme.md

@@ -0,0 +1,13 @@
+# Macropad
+
+3x3 Macropad.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Treasure Macropad Type-9   
+Hardware Availability: [Treasure](http://macropad.co/)   
+
+Make example for this keyboard (after setting up your build environment):
+
+    make macropad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/macropad/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/nyquist/keymaps/mtdjr/config.h

@@ -0,0 +1,36 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/nyquist/keymaps/mtdjr/keymap.c

@@ -0,0 +1,64 @@
+#include QMK_KEYBOARD_H
+#include "mtdjr.h"
+
+extern keymap_config_t keymap_config;
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_kc (
+// ,-----------------------------.  .-----------------------------.
+    GESC,  1 ,  2 ,  3 ,  4 ,  5 ,     6 ,  7 ,  8 ,  9 ,  0 ,BSPC,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+     TAB,  Q ,  W ,  E ,  R ,  T ,     Y ,  U ,  I ,  O ,  P ,QUOT,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    RASE,  A ,  S ,  D ,  F ,  G ,     H ,  J ,  K ,  L ,SCLN, ENT,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    LSFT,  Z ,  X ,  C ,  V ,  B ,     N ,  M ,COMM, DOT,SLSH,xxxx,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    LOWR,LCTL,LALT,LGUI, SPC, SPC,    SPC, SPC,LEFT,DOWN, UP ,RGHT
+// '-----------------------------'  '-----------------------------'
+),
+
+  [_LOWER] = LAYOUT_kc(
+// ,-----------------------------.  .-----------------------------.
+    TILD,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,UNDS,PLUS, DEL,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,LBRC,RBRC,BSLS,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,xxxx,xxxx,    ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,UNDO, CUT,XCPY,XINS,xxxx,   xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,    ,    ,    ,    ,    ,       ,    ,MNXT,VOLD,VOLU,MPLY
+// '-----------------------------'  '-----------------------------'
+),
+
+  [_RAISE] = LAYOUT_kc(
+// ,-----------------------------.  .-----------------------------.
+    xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,MINS, EQL,    ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,LCBR,RCBR,PIPE,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,xxxx,xxxx,    ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,    ,    ,    ,    ,    ,       ,    ,MNXT,VOLD,VOLU,MPLY
+// '-----------------------------'  '-----------------------------'
+),
+
+  [_ADJUST] =  LAYOUT_kc(
+// ,-----------------------------.  .-----------------------------.
+    xxxx,ROOT,PPLY,PSEF,xxxx,xxxx,    F1 , F2 , F3 , F4 , F5 , F6 ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,xxxx,xxxx,xxxx, RST,xxxx,    F7 , F8 , F9 , F10, F11, F12,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        , RGB,RHUI,RSAI,RVAI, MOD,   xxxx,xxxx,xxxx,xxxx,xxxx,    ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,RBTH,RHUD,RSAD,RVAD,RMOD,   xxxx,xxxx,xxxx,xxxx,xxxx, BLB,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,xxxx,xxxx,xxxx,    ,    ,       ,    ,BLOF, BLD, BLI,BLON
+// '-----------------------------'  '-----------------------------'
+)
+
+};

keyboards/nyquist/keymaps/mtdjr/rules.mk

@@ -0,0 +1,2 @@
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes

keyboards/rama/readme.md

@@ -6,4 +6,6 @@ Firmware for keyboards designed by [RAMA WORKS](https://rama.works)
 
 [RAMA M60-A](https://rama.works/#/m60-a/)
 
+[RAMA U80-A](https://rama.works/#/tkl-a/)
+
 [RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open)

keyboards/rama/u80_a/config.h

@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x080A // 80-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RAMA.WORKS
+#define PRODUCT         RAMA U80-A
+#define DESCRIPTION     RAMA U80-A Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+

keyboards/rama/u80_a/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "RAMA U80-A", 
+    "url": "https://rama.works/#/tkl-a/", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 18.25, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+        }
+    }
+}

keyboards/rama/u80_a/keymaps/default/keymap.c

@@ -0,0 +1,22 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	  [0] = LAYOUT_all(
+	    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_PSCR, KC_SLCK, KC_PAUS,
+	    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+	    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
+	    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_TRNS,                            KC_UP,
+	    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+
+	  [1] = LAYOUT_all(
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+

keyboards/rama/u80_a/readme.md

@@ -0,0 +1,15 @@
+# RAMA U80-A
+
+![RAMA U80-A](https://something.com/something.jpg)
+
+A TKL keyboard. [More info at RAMA WORKS](https://rama.works/#/tkl-a/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: RAMA U80-A PCB  
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make rama/u80_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/rama/u80_a/rules.mk

@@ -0,0 +1,68 @@
+# project specific files
+SRC =	drivers/issi/is31fl3736.c \
+		drivers/avr/i2c_master.c \
+		keyboards/wilba_tech/wt_mono_backlight.c \
+		keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/rama/u80_a/u80_a.c

@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)

keyboards/rama/u80_a/u80_a.h

@@ -0,0 +1,43 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 3,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 18 columns,
+// so the numbering goes 00 to 16. Deal with it.
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,             K014, K015, K016, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K114, K115, K116, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K214, K215, K216, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,                               \
+    K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,             K415,       \
+    K500, K501, K502,                   K506,                   K510, K511, K512, K513,       K514, K515, K516  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
+    { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \
+	{ K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \
+    { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 }  \
+}
+

keyboards/toad/config.h

@@ -0,0 +1,54 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6776
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    farmakon
+#define PRODUCT         "TOAD"
+#define DESCRIPTION     "TOAD"
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 14
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, F6, F5, F4, F1, F0 }
+#define MATRIX_COL_PINS { B3, B2, B1, E6, B7, C7, C6, D4, D6, D7, B4, D0, D1, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 0
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/toad/keymaps/ansi_wk/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP_ANSI_WK(
+	LAYOUT_ansi_wk(
 	KC_ESC,           KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,            \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,   \
@@ -12,19 +12,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	)
 };
 
-void led_set_user(uint8_t usb_led) {
 
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/keymaps/ansi_wkl/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP_ANSI_WKL(
+	LAYOUT_ansi_wkl(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                    \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,   \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,        KC_LALT,                                  KC_SPC,                 KC_RALT,      KC_RCTL
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/keymaps/default/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP(
+	LAYOUT_all(
 	KC_ESC,           KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,      KC_F9, KC_F10, KC_F11, KC_F12,              \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,    \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,         \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                  KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/keymaps/iso_wk/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP_ISO_WK(
+	LAYOUT_iso_wk(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                    \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC,            \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                 KC_RALT,KC_RGUI, KC_APP,KC_RCTL
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/keymaps/iso_wkl/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP_ISO_WKL(
+	LAYOUT_iso_wkl(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                    \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC,            \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,        KC_LALT,                                  KC_SPC,                 KC_RALT,                KC_RCTL
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/readme.md

@@ -0,0 +1,14 @@
+# Toad
+
+Toad: 70% Mechanical Keyboard PCB.
+
+Toad schematic and PCB are available opensource under Creative Commons BY-SA 3.0 license on EasyEDA at [this link](https://easyeda.com/farmakon/70_Keyboard-d4f6baf4792d4ada9c0571fa3713e461)
+
+For more informations on the Toad please visit this [geekhack.org thread](https://geekhack.org/index.php?topic=91388.0)
+
+Make examples for these keyboards (after setting up your build environment):
+
+    make toad:default
+
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/toad/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes	# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no

keyboards/toad/toad.c

@@ -0,0 +1,18 @@
+#include "toad.h"
+
+void led_set_user(uint8_t usb_led) {
+
+	//LED1
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
+	} else {
+		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
+	}
+
+	//LED2
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
+	} else {
+		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
+	}
+}

keyboards/toad/toad.h

@@ -0,0 +1,91 @@
+#ifndef TOAD
+#define TOAD
+
+#include "quantum.h"
+
+// 70% keyboard: default - all keys
+#define LAYOUT_all( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,        \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,        \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,        \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,        \
+	K500, K501, K502,                         K507,             K510, K511, K512, K513         \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+	{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413 }, \
+	{ K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 }  \
+}
+
+// 70% keyboard: ANSI Winkey
+#define LAYOUT_ansi_wk( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,  \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,  \
+	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
+	K500, K501, K502,                         K507,             K510, K511, K512, K513   \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \
+	{ K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+	{ K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 }  \
+}
+
+// 70% keyboard: ANSI Winkeyless
+#define LAYOUT_ansi_wkl( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,  \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,  \
+	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
+	K500,       K502,                         K507,                   K511,       K513   \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \
+	{ K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+	{ K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 }  \
+}
+
+// 70% keyboard: ISO Winkey
+#define LAYOUT_iso_wk( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,        \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,  \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
+	K500, K501, K502,                         K507,             K510, K511, K512, K513   \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+	{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+	{ K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 }  \
+}
+
+// 70% keyboard: ISO Winkeyless
+#define LAYOUT_iso_wkl( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,        \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,  \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
+	K500,       K502,                         K507,                   K511,       K513   \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+	{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+	{ K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 }  \
+}
+
+#endif

keyboards/whitefox/keymaps/konstantin/config.h

@@ -2,9 +2,9 @@
 
 #define FORCE_NKRO
 
-#define TAPPING_TOGGLE 2
-#define TAPPING_TERM 200
 #define PERMISSIVE_HOLD
+#define TAPPING_TERM 200
+#define TAPPING_TOGGLE 2
 
 #define MOUSEKEY_DELAY 50
 #define MOUSEKEY_INTERVAL 15

keyboards/whitefox/keymaps/konstantin/keymap.c

@@ -1,12 +1,14 @@
 #include QMK_KEYBOARD_H
 
+#define FN      MO(L_FN)
 #define FN_CAPS LT(L_FN, KC_CAPS)
-#define FN_CTRL TD(TD_FN_CTRL)
-#define RL_ALT  TD(TD_RL_ALT)  // Unused
+#define FN_RCTL TD(TD_FN_RCTL) // Unused
+#define RLALT   TD(TD_RLALT)   // Unused
 
 #define TOP     LCTL(KC_HOME)
 #define BOTTOM  LCTL(KC_END)
 
+#define UC_COMM UC(0x002C)
 #define UC_LPRN UC(0x0028)
 #define UC_RPRN UC(0x0029)
 #define UC_EQLS UC(0x003D)
@@ -32,19 +34,21 @@ enum custom_keycodes {
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record)
 {
-  if (!record->event.pressed) { return true; }
-
   switch (keycode) {
   case CLEAR:
-    SEND_STRING(SS_LCTRL("a") SS_TAP(X_DELETE));
+    if (record->event.pressed) {
+      SEND_STRING(SS_LCTRL("a") SS_TAP(X_DELETE));
+    }
     return false;
 
   case NUMPAD:
-    layer_invert(L_NUMPAD);
-    bool num_lock = host_keyboard_leds() & 1<<USB_LED_NUM_LOCK;
-    if (num_lock != (bool)IS_LAYER_ON(L_NUMPAD)) {
-      register_code(KC_NLCK);  // Force Num Lock to match layer state.
-      unregister_code(KC_NLCK);
+    if (record->event.pressed) {
+      layer_invert(L_NUMPAD);
+      bool num_lock = host_keyboard_leds() & 1<<USB_LED_NUM_LOCK;
+      if (num_lock != (bool)IS_LAYER_ON(L_NUMPAD)) {
+        register_code(KC_NLCK); // Toggle Num Lock to match layer state.
+        unregister_code(KC_NLCK);
+      }
     }
     return false;
 
@@ -54,8 +58,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record)
 }
 
 enum tap_dance {
-  TD_FN_CTRL,
-  TD_RL_ALT,  // Unused
+  TD_FN_RCTL,
+  TD_RLALT,
 };
 
 void td_fn_ctrl_finished(qk_tap_dance_state_t *state, void *user_data)
@@ -72,8 +76,8 @@ void td_fn_ctrl_reset(qk_tap_dance_state_t *state, void *user_data)
 }
 
 qk_tap_dance_action_t tap_dance_actions[] = {
-  [TD_FN_CTRL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, td_fn_ctrl_finished, td_fn_ctrl_reset),
-  [TD_RL_ALT]  = ACTION_TAP_DANCE_DOUBLE(KC_RALT, KC_LALT),  // Unused
+  [TD_FN_RCTL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, td_fn_ctrl_finished, td_fn_ctrl_reset),
+  [TD_RLALT]   = ACTION_TAP_DANCE_DOUBLE(KC_RALT, KC_LALT),
 };
 
 const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -85,17 +89,17 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |---------------------------------------------------------------|
    * |FnCaps| A | S | D | F | G | H | J | K | L | ; | ' | Enter  |PgU|
    * |---------------------------------------------------------------|
-   * | LShift | Z | X | C | V | B | N | M | , | . | / |RShift| ↑ |PgD|
+   * | LShift | Z | X | C | V | B | N | M | , | . | / |  Fn  | ↑ |PgD|
    * |---------------------------------------------------------------|
-   * |LCtl|LGui|LAlt|         Space          |RAlt|FnCt| | ← | ↓ | → |
+   * |LCtl|LGui|LAlt|         Space          |RAlt|RCtl| | ← | ↓ | → |
    * `---------------------------------------------------------------'
    */
   [L_BASE] = LAYOUT_truefox( \
     KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS,KC_GRV, KC_PSCR, \
     KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,        KC_DEL,  \
     FN_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,        KC_ENT,         KC_PGUP, \
-    KC_LSFT,        KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,        KC_UP,  KC_PGDN, \
-    KC_LCTL,KC_LGUI,KC_LALT,                        KC_SPC,                 KC_RALT,FN_CTRL,                KC_LEFT,KC_DOWN,KC_RGHT  \
+    KC_LSFT,        KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,FN,             KC_UP,  KC_PGDN, \
+    KC_LCTL,KC_LGUI,KC_LALT,                        KC_SPC,                 KC_RALT,KC_RCTL,                KC_LEFT,KC_DOWN,KC_RGHT  \
   ),
 
   /* Function layer
@@ -106,9 +110,9 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |---------------------------------------------------------------|
    * |      |M← |M↓ |M→ |MW↑|   |   |   |   |   |   |   |        |Top|
    * |---------------------------------------------------------------|
-   * |        |MA0|MA2|MW←|MW→|   |   |   |Vo-|Vo+|Mut|      |PgU|Btm|
+   * |        |MA0|MA2|MW←|MW→|   |   |   |VoD|VoU|Mut|      |PgU|Btm|
    * |---------------------------------------------------------------|
-   * |    |    |    |          MW↓           |App |    | |Hom|PgD|End|
+   * |    |    |    |          MW↓           |    |Menu| |Hom|PgD|End|
    * `---------------------------------------------------------------'
    */
   [L_FN] = LAYOUT_truefox( \
@@ -116,7 +120,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_BTN4,KC_BTN2,KC_MS_U,KC_BTN1,KC_BTN3,KC_BTN5,_______,_______,_______,KC_MSTP,KC_MPLY,KC_MPRV,KC_MNXT,CLEAR,          KC_INS,  \
     _______,KC_MS_L,KC_MS_D,KC_MS_R,KC_WH_U,_______,_______,_______,_______,_______,_______,_______,        _______,        TOP,     \
     _______,        KC_ACL0,KC_ACL2,KC_WH_L,KC_WH_R,_______,_______,_______,KC_VOLD,KC_VOLU,KC_MUTE,_______,        KC_PGUP,BOTTOM,  \
-    _______,_______,_______,                        KC_WH_D,                KC_APP, _______,                KC_HOME,KC_PGDN,KC_END   \
+    _______,_______,_______,                        KC_WH_D,                _______,KC_APP,                 KC_HOME,KC_PGDN,KC_END   \
   ),
 
   /* Numpad layer
@@ -127,7 +131,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |---------------------------------------------------------------|
    * |      |   |   |   |   |   |   |P1 |P2 |P3 |P* | × | PEnter |   |
    * |---------------------------------------------------------------|
-   * |        |   |   |   |   |   |P0 |P0 |P, |P. |P/ |  ÷   |   |   |
+   * |        |   |   |   |   |   |P0 |P0 | , |P. |P/ |  ÷   |   |   |
    * |---------------------------------------------------------------|
    * |    |    |    |                        |    |    | |   |   |   |
    * `---------------------------------------------------------------'
@@ -136,7 +140,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     NUMPAD, _______,_______,_______,_______,_______,_______,KC_P7,  KC_P8,  KC_P9,  KC_PMNS,UC_MINS,UC_EQLS,NUMPAD, _______,_______, \
     _______,_______,_______,_______,_______,_______,_______,KC_P4,  KC_P5,  KC_P6,  KC_PPLS,UC_LPRN,UC_RPRN,_______,        _______, \
     _______,_______,_______,_______,_______,_______,_______,KC_P1,  KC_P2,  KC_P3,  KC_PAST,UC_MULS,        KC_PENT,        _______, \
-    _______,        _______,_______,_______,_______,_______,KC_P0,  KC_P0,  KC_PCMM,KC_PDOT,KC_PSLS,UC_DIVS,        _______,_______, \
+    _______,        _______,_______,_______,_______,_______,KC_P0,  KC_P0,  UC_COMM,KC_PDOT,KC_PSLS,UC_DIVS,        _______,_______, \
     _______,_______,_______,                        _______,                _______,_______,                _______,_______,_______  \
   ),
 };

keyboards/wilba_tech/wt60_a/config.h

@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x060A // 60-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT60-A
+#define DESCRIPTION     wilba.tech WT60-A
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+

keyboards/wilba_tech/wt60_a/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "wilba.tech WT60-A", 
+    "url": "https://wilba.tech", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+        "LAYOUT_60_ansi_split_bs_rshift": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/wilba_tech/wt60_a/keymaps/ansi_split_bs_rshift/keymap.c

@@ -0,0 +1,38 @@
+// ANSI split backspace/right shift layout for WT60-A
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+	KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, KC_APP, KC_RCTL),
+
+// Fn1 Layer
+[1] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS, KC_DEL,
+	KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer
+[3] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/wilba_tech/wt60_a/keymaps/default/keymap.c

@@ -0,0 +1,38 @@
+// Default layout for WT60-A
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_ansi(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+	KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(1),   KC_RCTL),
+
+// Fn1 Layer
+[1] = LAYOUT_60_ansi(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL ,
+	KC_CAPS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
+	KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END,  KC_PGDN, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_ansi(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer
+[3] = LAYOUT_60_ansi(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/wilba_tech/wt60_a/readme.md

@@ -0,0 +1,15 @@
+# WILBA.TECH WT60-A
+
+![WILBA.TECH WT60-A](https://wilba.tech)
+
+WT60-A is a keyboard PCB supporting 60% layout. [More info at wilba.tech](https://wilba.tech/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: WILBA.TECH WT65-A  
+Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt60_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wilba_tech/wt60_a/rules.mk

@@ -0,0 +1,68 @@
+# project specific files
+SRC =	drivers/issi/is31fl3736.c \
+		drivers/avr/i2c_master.c \
+		keyboards/wilba_tech/wt_mono_backlight.c \
+		keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/wilba_tech/wt60_a/wt60_a.c

@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)

keyboards/wilba_tech/wt60_a/wt60_a.h

@@ -0,0 +1,52 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       \
+    K400, K401, K402,                   K406,                   K410, K411, K412, K413        \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+	{ K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+    { K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413 }  \
+}
+
+#define LAYOUT_60_ansi( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013,  \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
+    K400, K401, K402,                   K406,                   K410, K411, K412, K413  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____ }, \
+	{ K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____ }, \
+    { K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413 }  \
+}
+
+
+

keyboards/wilba_tech/wt65_a/config.h

@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x065A // 65-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT65-A
+#define DESCRIPTION     wilba.tech WT65-A
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+

keyboards/wilba_tech/wt65_a/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "wilba.tech WT65-A", 
+    "url": "https://wilba.tech", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Fn", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        }
+    }
+}

keyboards/wilba_tech/wt65_a/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	// Default layer
+	[0] = LAYOUT_all(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
+		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                   KC_UP,   KC_END,
+		KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT),
+
+	// Fn1 Layer
+	[1] = LAYOUT_all(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  KC_TRNS,
+		KC_CAPS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END,  KC_PGDN, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn2 Layer
+	[2] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn3 Layer
+	[3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+};
+

keyboards/wilba_tech/wt65_a/readme.md

@@ -0,0 +1,15 @@
+# WILBA.TECH WT65-A
+
+![WILBA.TECH WT65-A](https://wilba.tech)
+
+WT65-A is a keyboard PCB supporting 65% layout with 0.25U blocker. [More info at wilba.tech](https://wilba.tech/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: WILBA.TECH WT65-A  
+Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt65_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wilba_tech/wt65_a/rules.mk

@@ -0,0 +1,68 @@
+# project specific files
+SRC =	drivers/issi/is31fl3736.c \
+		drivers/avr/i2c_master.c \
+		keyboards/wilba_tech/wt_mono_backlight.c \
+		keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/wilba_tech/wt65_a/wt65_a.c

@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)

keyboards/wilba_tech/wt65_a/wt65_a.h

@@ -0,0 +1,41 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 2,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 16 columns,
+// so the numbering goes 00 to 14. Deal with it.
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K214, \
+    K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,             K313, K314, \
+    K400, K401, K402,                   K406,                   K410, K411,       K412, K413, K414  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
+	{ K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \
+    { K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413, K414 }  \
+}
+

keyboards/wilba_tech/wt80_a/config.h

@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x080A // 80-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT80-A
+#define DESCRIPTION     wilba.tech WT80-A
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+

keyboards/wilba_tech/wt80_a/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "wilba.tech WT80-A", 
+    "url": "https://wilba.tech", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 18.25, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+        }
+    }
+}

keyboards/wilba_tech/wt80_a/keymaps/default/keymap.c

@@ -0,0 +1,22 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	  [0] = LAYOUT_all(
+	    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_PSCR, KC_SLCK, KC_PAUS,
+	    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+	    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
+	    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_TRNS,                            KC_UP,
+	    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+
+	  [1] = LAYOUT_all(
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+

keyboards/wilba_tech/wt80_a/readme.md

@@ -0,0 +1,15 @@
+# WILBA.TECH WT80-A
+
+![WILBA.TECH WT80-A](https://wilba./tech)
+
+WT80-A is a keyboard PCB supporting TKL layout with 0.25U gaps. [More info at wilba.tech](https://wilba.tech/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: WILBA.TECH WT80-A  
+Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt80_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wilba_tech/wt80_a/rules.mk

@@ -0,0 +1,68 @@
+# project specific files
+SRC =	drivers/issi/is31fl3736.c \
+		drivers/avr/i2c_master.c \
+		keyboards/wilba_tech/wt_mono_backlight.c \
+		keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/wilba_tech/wt80_a/wt80_a.c

@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)

keyboards/wilba_tech/wt80_a/wt80_a.h

@@ -0,0 +1,43 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 3,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 18 columns,
+// so the numbering goes 00 to 16. Deal with it.
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,             K014, K015, K016, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K114, K115, K116, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K214, K215, K216, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,                               \
+    K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,             K415,       \
+    K500, K501, K502,                   K506,                   K510, K511, K512, K513,       K514, K515, K516  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
+    { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \
+	{ K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \
+    { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 }  \
+}
+

keyboards/wilba_tech/wt_main.c

@@ -0,0 +1,55 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_mono_backlight.h"
+
+void bootmagic_lite(void)
+{
+	// The lite version of TMK's bootmagic.
+	// 100% less potential for accidentally making the
+	// keyboard do stupid things.
+
+	// We need multiple scans because debouncing can't be turned off.
+	matrix_scan();
+	wait_ms(DEBOUNCING_DELAY);
+	wait_ms(DEBOUNCING_DELAY);
+	matrix_scan();
+
+	// If the Esc (matrix 0,0) is held down on power up,
+	// reset the EEPROM valid state and jump to bootloader.
+	if ( matrix_get_row(0) & (1<<0) ) {
+		// Set the TMK/QMK EEPROM state as invalid.
+		eeconfig_disable();
+		// Jump to bootloader.
+		bootloader_jump();
+	}
+}
+
+void matrix_init_kb(void)
+{
+	bootmagic_lite();
+	backlight_init_drivers();
+	backlight_timer_init();
+	backlight_timer_enable();
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void)
+{
+	backlight_update_pwm_buffers();
+	matrix_scan_user();
+}

keyboards/wilba_tech/wt_mono_backlight.c

@@ -0,0 +1,116 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "wt_mono_backlight.h"
+#include "drivers/avr/i2c_master.h"
+#include "drivers/issi/is31fl3736.h"
+
+#include <avr/interrupt.h>
+
+#define ISSI_ADDR_DEFAULT 0x50
+
+bool g_suspend_state = false;
+
+// Global tick at 20 Hz
+uint32_t g_tick = 0;
+uint8_t g_config_effect_speed = 0;
+uint8_t g_config_brightness = 255;
+
+void backlight_init_drivers(void)
+{
+	// Initialize I2C
+	i2c_init();
+	IS31FL3736_init( ISSI_ADDR_DEFAULT );
+
+	for ( uint8_t index = 0; index < 96; index++ )	{
+		IS31FL3736_mono_set_led_control_register( index, true );
+	}
+	IS31FL3736_update_led_control_registers( ISSI_ADDR_DEFAULT, 0x00 );
+}
+
+
+// This is (F_CPU/1024) / 20 Hz
+// = 15625 Hz / 20 Hz
+// = 781
+#define TIMER3_TOP 781
+
+void backlight_timer_init(void)
+{
+	static uint8_t backlight_timer_is_init = 0;
+	if ( backlight_timer_is_init ) {
+		return;
+	}
+	backlight_timer_is_init = 1;
+
+	// Timer 3 setup
+	TCCR3B = _BV(WGM32) | 			// CTC mode OCR3A as TOP
+			 _BV(CS32) | _BV(CS30); // prescale by /1024
+	// Set TOP value
+	uint8_t sreg = SREG;
+	cli();
+
+	OCR3AH = (TIMER3_TOP >> 8) & 0xff;
+	OCR3AL = TIMER3_TOP & 0xff;
+	SREG = sreg;
+}
+
+void backlight_timer_enable(void)
+{
+	TIMSK3 |= _BV(OCIE3A);
+}
+
+void backlight_timer_disable(void)
+{
+	TIMSK3 &= ~_BV(OCIE3A);
+}
+
+void backlight_set_suspend_state(bool state)
+{
+	g_suspend_state = state;
+}
+
+void backlight_effect_cycle_all(void)
+{
+	uint8_t offset = ( g_tick << g_config_effect_speed ) & 0xFF;
+
+	backlight_set_brightness_all( offset );
+}
+
+ISR(TIMER3_COMPA_vect)
+{
+	// delay 1 second before driving LEDs or doing anything else
+	static uint8_t startup_tick = 0;
+	if ( startup_tick < 20 ) {
+		startup_tick++;
+		return;
+	}
+
+	g_tick++;
+
+	//backlight_effect_cycle_all();
+	backlight_set_brightness_all( 255 );
+}
+
+void backlight_update_pwm_buffers(void)
+{
+	IS31FL3736_update_pwm_buffers(ISSI_ADDR_DEFAULT,0x00);
+}
+
+void backlight_set_brightness_all( uint8_t value )
+{
+	IS31FL3736_mono_set_brightness_all( value );
+}
+

keyboards/wilba_tech/wt_mono_backlight.h

@@ -0,0 +1,33 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+void backlight_init_drivers(void);
+
+void backlight_timer_init(void);
+void backlight_timer_enable(void);
+void backlight_timer_disable(void);
+
+void backlight_set_suspend_state(bool state);
+
+void backlight_update_pwm_buffers(void);
+
+void backlight_set_brightness_all( uint8_t value );
+

keyboards/xmmx/keymaps/ansi_wk/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP_ANSI_WK(
+	LAYOUT_ansi_wk(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,           KC_DEL, KC_END, KC_PGDN,   \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                 KC_RALT,KC_RGUI, KC_APP,KC_RCTL,          KC_LEFT,KC_DOWN,KC_RGHT
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/xmmx/keymaps/ansi_wkl/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP_ANSI_WKL(
+	LAYOUT_ansi_wkl(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,           KC_DEL, KC_END, KC_PGDN,   \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,        KC_LALT,                                  KC_SPC,                 KC_RALT,      KC_RCTL,                    KC_LEFT,KC_DOWN,KC_RGHT
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/xmmx/keymaps/default/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP(
+	LAYOUT_all(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,  KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,           KC_DEL, KC_END, KC_PGDN,   \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                 KC_RALT,KC_RGUI, KC_APP,KC_RCTL,          KC_LEFT,KC_DOWN,KC_RGHT
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/xmmx/keymaps/iso_wk/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP_ISO_WK(
+	LAYOUT_iso_wk(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC,                    KC_DEL, KC_END, KC_PGDN,   \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                 KC_RALT,KC_RGUI, KC_APP,KC_RCTL,          KC_LEFT,KC_DOWN,KC_RGHT
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/xmmx/keymaps/iso_wkl/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP_ISO_WKL(
+	LAYOUT_iso_wkl(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC,                    KC_DEL, KC_END, KC_PGDN,   \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,        KC_LALT,                                  KC_SPC,                 KC_RALT,                KC_RCTL,          KC_LEFT,KC_DOWN,KC_RGHT
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/xmmx/readme.md

@@ -1,20 +1,14 @@
-XMMX and Toad
-========
+# XMMX
 
 XMMX: Tenkeyless Mechanical Keyboard PCB designed to fit Filco Majestouch TKL and Cooler Master Quickfire Rapid cases
-Toad: 70% Mechanical Keyboard PCB.
 
 XMMX schematic and PCB are available opensource under Creative Commons BY-SA 3.0 license on EasyEDA at [this link](https://easyeda.com/farmakon/XMMX-0447d28c1e4644b88fd04905d983684d)
-Toad schematic and PCB are available opensource under Creative Commons BY-SA 3.0 license on EasyEDA at [this link](https://easyeda.com/farmakon/70_Keyboard-d4f6baf4792d4ada9c0571fa3713e461)
 
 For more informations on the XMMX please visit this [geekhack.org thread](https://geekhack.org/index.php?topic=93422.0)
-For more informations on the Toad please visit this [geekhack.org thread](https://geekhack.org/index.php?topic=91388.0)
 
 Make examples for these keyboards (after setting up your build environment):
 
     make xmmx:default
 
-    make xmmx:toad
-
 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/xmmx/xmmx.c

@@ -1 +1,18 @@
 #include "xmmx.h"
+
+void led_set_user(uint8_t usb_led) {
+
+	//LED1
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
+	} else {
+		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
+	}
+
+	//LED2
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
+	} else {
+		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
+	}
+}

keyboards/xmmx/xmmx.h

@@ -4,7 +4,7 @@
 #include "quantum.h"
 
 // 80% keyboard: default - all keys
-#define KEYMAP( \
+#define LAYOUT_all( \
 	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016,       \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K013, K114, K115, K116, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216,       \
@@ -21,7 +21,7 @@
 }
 
 // 80% keyboard: ANSI Winkey
-#define KEYMAP_ANSI_WK( \
+#define LAYOUT_ansi_wk( \
 	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \
@@ -38,7 +38,7 @@
 }
 
 // 80% keyboard: ANSI Winkeyless
-#define KEYMAP_ANSI_WKL( \
+#define LAYOUT_ansi_wkl( \
 	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \
@@ -55,7 +55,7 @@
 }
 
 // 80% keyboard: ISO Winkey
-#define KEYMAP_ISO_WK( \
+#define LAYOUT_iso_wk( \
 	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, K215, K216, \
@@ -72,7 +72,7 @@
 }
 
 // 80% keyboard: ISO Winkeyless
-#define KEYMAP_ISO_WKL( \
+#define LAYOUT_iso_wkl( \
 	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, K215, K216, \
@@ -88,90 +88,4 @@
 	{ K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513, K514, K515, K516 }  \
 }
 
-
-// 70% keyboard: default - all keys
-#define TOAD_KEYMAP( \
-	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,        \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K013,  \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,        \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,        \
-	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,        \
-	K500, K501, K502,                         K507,             K510, K511, K512, K513         \
-) { \
-	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
-	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
-	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
-	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
-	{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413 }, \
-	{ K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 }  \
-}
-
-// 70% keyboard: ANSI Winkey
-#define TOAD_KEYMAP_ANSI_WK( \
-	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,  \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,  \
-	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
-	K500, K501, K502,                         K507,             K510, K511, K512, K513   \
-) { \
-	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
-	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
-	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
-	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \
-	{ K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
-	{ K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 }  \
-}
-
-// 70% keyboard: ANSI Winkeyless
-#define TOAD_KEYMAP_ANSI_WKL( \
-	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,  \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,  \
-	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
-	K500,       K502,                         K507,                   K511,       K513   \
-) { \
-	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
-	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
-	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
-	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \
-	{ K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
-	{ K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 }  \
-}
-
-// 70% keyboard: ISO Winkey
-#define TOAD_KEYMAP_ISO_WK( \
-	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,        \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,  \
-	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
-	K500, K501, K502,                         K507,             K510, K511, K512, K513   \
-) { \
-	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
-	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
-	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \
-	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
-	{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
-	{ K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 }  \
-}
-
-// 70% keyboard: ISO Winkeyless
-#define TOAD_KEYMAP_ISO_WKL( \
-	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,        \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,  \
-	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
-	K500,       K502,                         K507,                   K511,       K513   \
-) { \
-	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
-	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
-	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \
-	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
-	{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
-	{ K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 }  \
-}
-
 #endif

layouts/default/60_ansi_tsangan/default_60_ansi_tsangan/keymap.c

@@ -1,11 +1,11 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_60_ansi(
-    KC_GRV, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL,    KC_BSPC    ,
-      KC_TAB  , KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,  KC_BSLS ,
-      KC_CAPS   , KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,      KC_ENT    ,
-        KC_LSFT     , KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,      KC_RSFT       ,
-    KC_LCTL , KC_LGUI , KC_LALT ,                      KC_SPC                     , KC_RALT , KC_RGUI , KC_RCTL
+  [0] = LAYOUT_60_ansi_tsangan(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RALT, KC_RGUI, KC_RCTL
   )
 };

layouts/default/60_iso_tsangan/default_60_iso_tsangan/keymap.c

@@ -1,11 +1,11 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_60_iso( 
-        KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, 
-          KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
-        KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
-        KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
-        KC_LCTRL, KC_LALT, KC_LGUI,         KC_SPACE,               KC_RGUI,  KC_RALT,  KC_RCTL
+    [0] = LAYOUT_60_iso_tsangan(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                                      KC_RGUI, KC_RALT, KC_RCTL
     )
 };

quantum/rgb_matrix.c

@@ -18,7 +18,6 @@
 
 
 #include "rgb_matrix.h"
-#include "i2c_master.h"
 #include "progmem.h"
 #include "config.h"
 #include "eeprom.h"
@@ -111,29 +110,15 @@ void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led_i, uint8_t
 }
 
 void rgb_matrix_update_pwm_buffers(void) {
-#ifdef IS31FL3731
-    IS31FL3731_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-    IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-#elif defined(IS31FL3733)
-    IS31FL3733_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-    IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-#endif
+    rgb_matrix_driver.flush();
 }
 
 void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) {
-#ifdef IS31FL3731
-    IS31FL3731_set_color( index, red, green, blue );
-#elif defined(IS31FL3733)
-    IS31FL3733_set_color( index, red, green, blue );
-#endif
+    rgb_matrix_driver.set_color(index, red, green, blue);
 }
 
 void rgb_matrix_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) {
-#ifdef IS31FL3731
-    IS31FL3731_set_color_all( red, green, blue );
-#elif defined(IS31FL3733)
-    IS31FL3733_set_color_all( red, green, blue );
-#endif
+    rgb_matrix_driver.set_color_all(red, green, blue);
 }
 
 bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) {
@@ -196,47 +181,6 @@ void rgb_matrix_test(void) {
     }
 }
 
-// This tests the LEDs
-// Note that it will change the LED control registers
-// in the LED drivers, and leave them in an invalid
-// state for other backlight effects.
-// ONLY USE THIS FOR TESTING LEDS!
-void rgb_matrix_single_LED_test(void) {
-    static uint8_t color = 0; // 0,1,2 for R,G,B
-    static uint8_t row = 0;
-    static uint8_t column = 0;
-
-    static uint8_t tick = 0;
-    tick++;
-
-    if ( tick > 2 )
-    {
-        tick = 0;
-        column++;
-    }
-    if ( column > MATRIX_COLS )
-    {
-        column = 0;
-        row++;
-    }
-    if ( row > MATRIX_ROWS )
-    {
-        row = 0;
-        color++;
-    }
-    if ( color > 2 )
-    {
-        color = 0;
-    }
-
-    uint8_t led[8], led_count;
-    map_row_column_to_led(row,column,led,&led_count);
-    for(uint8_t i = 0; i < led_count; i++) {
-        rgb_matrix_set_color_all( 40, 40, 40 );
-        rgb_matrix_test_led( led[i], color==0, color==1, color==2 );
-    }
-}
-
 // All LEDs off
 void rgb_matrix_all_off(void) {
     rgb_matrix_set_color_all( 0, 0, 0 );
@@ -438,10 +382,12 @@ void rgb_matrix_cycle_up_down(void) {
 void rgb_matrix_dual_beacon(void) {
     HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val };
     RGB rgb;
-    rgb_led led;
+    Point point;
+    double cos_value = cos(g_tick * PI / 128) / 32;
+    double sin_value =  sin(g_tick * PI / 128) / 112;
     for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
-        led = g_rgb_leds[i];
-        hsv.h = ((led.point.y - 32.0)* cos(g_tick * PI / 128) / 32 + (led.point.x - 112.0) * sin(g_tick * PI / 128) / (112)) * (180) + rgb_matrix_config.hue;
+        point = g_rgb_leds[i].point;
+        hsv.h = ((point.y - 32.0)* cos_value + (point.x - 112.0) * sin_value) * (180) + rgb_matrix_config.hue;
         rgb = hsv_to_rgb( hsv );
         rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b );
     }
@@ -450,10 +396,12 @@ void rgb_matrix_dual_beacon(void) {
 void rgb_matrix_rainbow_beacon(void) {
     HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val };
     RGB rgb;
-    rgb_led led;
+    Point point;
+    double cos_value = cos(g_tick * PI / 128);
+    double sin_value =  sin(g_tick * PI / 128);
     for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
-        led = g_rgb_leds[i];
-        hsv.h = (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (led.point.y - 32.0)* cos(g_tick * PI / 128) + (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (led.point.x - 112.0) * sin(g_tick * PI / 128) + rgb_matrix_config.hue;
+        point = g_rgb_leds[i].point;
+        hsv.h = (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (point.y - 32.0)* cos_value + (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (point.x - 112.0) * sin_value + rgb_matrix_config.hue;
         rgb = hsv_to_rgb( hsv );
         rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b );
     }
@@ -462,10 +410,12 @@ void rgb_matrix_rainbow_beacon(void) {
 void rgb_matrix_rainbow_pinwheels(void) {
     HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val };
     RGB rgb;
-    rgb_led led;
+    Point point;
+    double cos_value = cos(g_tick * PI / 128);
+    double sin_value =  sin(g_tick * PI / 128);
     for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
-        led = g_rgb_leds[i];
-        hsv.h = (2 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (led.point.y - 32.0)* cos(g_tick * PI / 128) + (2 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (66 - abs(led.point.x - 112.0)) * sin(g_tick * PI / 128) + rgb_matrix_config.hue;
+        point = g_rgb_leds[i].point;
+        hsv.h = (2 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (point.y - 32.0)* cos_value + (2 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (66 - abs(point.x - 112.0)) * sin_value + rgb_matrix_config.hue;
         rgb = hsv_to_rgb( hsv );
         rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b );
     }
@@ -474,12 +424,14 @@ void rgb_matrix_rainbow_pinwheels(void) {
 void rgb_matrix_rainbow_moving_chevron(void) {
     HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val };
     RGB rgb;
-    rgb_led led;
+    Point point;
+    uint8_t r = 128;
+    double cos_value = cos(r * PI / 128);
+    double sin_value =  sin(r * PI / 128);
+    double multiplier = (g_tick / 256.0 * 224);
     for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
-        led = g_rgb_leds[i];
-        // uint8_t r = g_tick;
-        uint8_t r = 128;
-        hsv.h = (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * abs(led.point.y - 32.0)* sin(r * PI / 128) + (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (led.point.x - (g_tick / 256.0 * 224)) * cos(r * PI / 128) + rgb_matrix_config.hue;
+        point = g_rgb_leds[i].point;
+        hsv.h = (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * abs(point.y - 32.0)* sin_value + (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (point.x - multiplier) * cos_value + rgb_matrix_config.hue;
         rgb = hsv_to_rgb( hsv );
         rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b );
     }
@@ -809,7 +761,7 @@ void rgb_matrix_indicators_user(void) {}
 // }
 
 void rgb_matrix_init(void) {
-  rgb_matrix_setup_drivers();
+  rgb_matrix_driver.init();
 
   // TODO: put the 1 second startup delay here?
 
@@ -833,33 +785,6 @@ void rgb_matrix_init(void) {
   eeconfig_debug_rgb_matrix(); // display current eeprom values
 }
 
-void rgb_matrix_setup_drivers(void) {
-  // Initialize TWI
-  i2c_init();
-#ifdef IS31FL3731
-  IS31FL3731_init( DRIVER_ADDR_1 );
-  IS31FL3731_init( DRIVER_ADDR_2 );
-#elif defined (IS31FL3733)
-  IS31FL3733_init( DRIVER_ADDR_1 );
-#endif
-
-  for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) {
-    bool enabled = true;
-    // This only caches it for later
-#ifdef IS31FL3731
-    IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
-#elif defined (IS31FL3733)
-    IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
-#endif
-  }
-  // This actually updates the LED drivers
-#ifdef IS31FL3731
-  IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-#elif defined (IS31FL3733)
-  IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-#endif
-}
-
 // Deals with the messy details of incrementing an integer
 uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) {
     int16_t new_value = value;
@@ -902,28 +827,6 @@ uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) {
 //     }
 // }
 
-void rgb_matrix_test_led( uint8_t index, bool red, bool green, bool blue ) {
-    for ( int i=0; i<DRIVER_LED_TOTAL; i++ )
-    {
-        if ( i == index )
-        {
-#ifdef IS31FL3731
-            IS31FL3731_set_led_control_register( i, red, green, blue );
-#elif defined (IS31FL3733)
-            IS31FL3733_set_led_control_register( i, red, green, blue );
-#endif
-        }
-        else
-        {
-#ifdef IS31FL3731
-            IS31FL3731_set_led_control_register( i, false, false, false );
-#elif defined (IS31FL3733)
-            IS31FL3733_set_led_control_register( i, false, false, false );
-#endif
-        }
-    }
-}
-
 uint32_t rgb_matrix_get_tick(void) {
     return g_tick;
 }

quantum/rgb_matrix.h

@@ -100,8 +100,6 @@ void rgb_matrix_indicators(void);
 void rgb_matrix_indicators_kb(void);
 void rgb_matrix_indicators_user(void);
 
-void rgb_matrix_single_LED_test(void);
-
 void rgb_matrix_init(void);
 void rgb_matrix_setup_drivers(void);
 
@@ -126,7 +124,6 @@ void rgb_matrix_decrease(void);
 // void backlight_get_key_color( uint8_t led, HSV *hsv );
 // void backlight_set_key_color( uint8_t row, uint8_t column, HSV hsv );
 
-void rgb_matrix_test_led( uint8_t index, bool red, bool green, bool blue );
 uint32_t rgb_matrix_get_tick(void);
 
 void rgblight_toggle(void);
@@ -143,4 +140,18 @@ void rgblight_decrease_speed(void);
 void rgblight_mode(uint8_t mode);
 uint32_t rgblight_get_mode(void);
 
+typedef struct {
+    /* Perform any initialisation required for the other driver functions to work. */
+    void (*init)(void);
+
+    /* Set the colour of a single LED in the buffer. */
+    void (*set_color)(int index, uint8_t r, uint8_t g, uint8_t b);
+    /* Set the colour of all LEDS on the keyboard in the buffer. */
+    void (*set_color_all)(uint8_t r, uint8_t g, uint8_t b);
+    /* Flush any buffered changes to the hardware. */
+    void (*flush)(void);
+} rgb_matrix_driver_t;
+
+extern const rgb_matrix_driver_t rgb_matrix_driver;
+
 #endif

quantum/rgb_matrix_drivers.c

@@ -0,0 +1,82 @@
+/* Copyright 2018 James Laird-Wah
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rgb_matrix.h"
+
+/* Each driver needs to define the struct
+ *    const rgb_matrix_driver_t rgb_matrix_driver;
+ * All members must be provided.
+ * Keyboard custom drivers can define this in their own files, it should only
+ * be here if shared between boards.
+ */
+
+#if defined(IS31FL3731) || defined(IS31FL3733)
+
+#include "i2c_master.h"
+
+static void init( void )
+{
+    i2c_init();
+#ifdef IS31FL3731
+    IS31FL3731_init( DRIVER_ADDR_1 );
+    IS31FL3731_init( DRIVER_ADDR_2 );
+#else
+    IS31FL3733_init( DRIVER_ADDR_1 );
+#endif
+    for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) {
+        bool enabled = true;
+        // This only caches it for later
+#ifdef IS31FL3731
+        IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
+#else
+        IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
+#endif
+    }
+    // This actually updates the LED drivers
+#ifdef IS31FL3731
+    IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
+#else
+    IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
+#endif
+}
+
+#ifdef IS31FL3731
+static void flush( void )
+{
+    IS31FL3731_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
+}
+
+const rgb_matrix_driver_t rgb_matrix_driver = {
+    .init = init,
+    .flush = flush,
+    .set_color = IS31FL3731_set_color,
+    .set_color_all = IS31FL3731_set_color_all,
+};
+#else
+static void flush( void )
+{
+    IS31FL3733_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
+}
+
+const rgb_matrix_driver_t rgb_matrix_driver = {
+    .init = init,
+    .flush = flush,
+    .set_color = IS31FL3733_set_color,
+    .set_color_all = IS31FL3733_set_color_all,
+};
+#endif
+
+#endif

users/mtdjr/mtdjr.c

@@ -5,7 +5,7 @@
 #endif
 
 #ifndef RGB_MODE
-  #define RGB_MODE 16
+  #define RGB_MODE 2
 #endif
 #ifndef RGB_HUE
   #define RGB_HUE 285

users/mtdjr/mtdjr.h

@@ -95,7 +95,7 @@ enum user_tapdance {
 #define KC_BLD  BL_DEC
 #define KC_BLB  BL_BRTG
 #define KC_BLON BL_ON
-#define KB_BLOF BL_OFF
+#define KC_BLOF BL_OFF
 
 
 #endif