convert to unix line-endings [skip ci]

* Fix LAYOUT define generation

Prior to this, only the full keyboard path was defined.  Eg `KEYBOARD_planck_rev6`.
But the docs mention `KEYBOAD_planck`, which never actually gets defined.

This addresses this, and creates a define for each level of the keyboard folder, so that stuff like `KEYBOARD_planck` actually exists.

* Clean up changes to make it more readable

build_keyboard.mk

@@ -110,8 +110,28 @@ ifneq ("$(wildcard $(KEYBOARD_C_1))","")
     KEYBOARD_SRC += $(KEYBOARD_C_1)
 endif
 
-OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE)
+# Generate KEYBOARD_name_subname for all levels of the keyboard folder
+KEYBOARD_FILESAFE_1 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_1)))
+KEYBOARD_FILESAFE_2 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_2)))
+KEYBOARD_FILESAFE_3 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_3)))
+KEYBOARD_FILESAFE_4 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_4)))
+KEYBOARD_FILESAFE_5 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_5)))
 
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_5)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_4)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_3)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_2)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_1)
+endif
 
 # Setup the define for QMK_KEYBOARD_H. This is used inside of keymaps so
 # that the same keymap may be used on multiple keyboards.

common_features.mk

@@ -114,37 +114,35 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
+RGB_MATRIX_ENABLE ?= no
+VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
+ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
+ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
+    $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
+endif
     OPT_DEFS += -DRGB_MATRIX_ENABLE
-    OPT_DEFS += -DIS31FL3731
-    COMMON_VPATH += $(DRIVER_PATH)/issi
-    SRC += is31fl3731.c
-    SRC += i2c_master.c
     SRC += $(QUANTUM_DIR)/color.c
     SRC += $(QUANTUM_DIR)/rgb_matrix.c
+    SRC += $(QUANTUM_DIR)/rgb_matrix_drivers.c
     CIE1931_CURVE = yes
 endif
 
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
+	RGB_MATRIX_ENABLE = IS31FL3731
+endif
+
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
-    OPT_DEFS += -DRGB_MATRIX_ENABLE
     OPT_DEFS += -DIS31FL3731
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3731.c
     SRC += i2c_master.c
-    SRC += $(QUANTUM_DIR)/color.c
-    SRC += $(QUANTUM_DIR)/rgb_matrix.c
-    CIE1931_CURVE = yes
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
-    OPT_DEFS += -DRGB_MATRIX_ENABLE
     OPT_DEFS += -DIS31FL3733
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3733.c
     SRC += i2c_master.c
-    SRC += $(QUANTUM_DIR)/color.c
-    SRC += $(QUANTUM_DIR)/rgb_matrix.c
-    CIE1931_CURVE = yes
 endif
 
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)

docs/_sidebar.md

@@ -3,6 +3,7 @@
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
+  * [Learning Resources](newbs_learn_more_resources.md)
 
 * [QMK Basics](README.md)
   * [QMK Introduction](getting_started_introduction.md)
@@ -47,6 +48,7 @@
   * [Backlight](feature_backlight.md)
   * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
+  * [Combos](feature_combo)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
   * [Grave Escape](feature_grave_esc.md)
@@ -74,6 +76,7 @@
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
+  * [ARM Debugging Guide](arm_debugging.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/_summary.md

@@ -47,6 +47,7 @@
   * [Backlight](feature_backlight.md)
   * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
+  * [Combos](feature_combo)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
   * [Grave Escape](feature_grave_esc.md)
@@ -74,6 +75,7 @@
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
+  * [ARM Debugging Guide](arm_debugging.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/arm_debugging.md

@@ -0,0 +1,87 @@
+# ARM Debugging usign Eclipse
+
+This page describes how to setup debugging for ARM MCUs using an SWD adapter and open-source/free tools. In this guide we will install GNU MCU Eclipse IDE for C/C++ Developers and OpenOCD together with all the necessary dependencies.
+
+This guide is catered towards advance users and assumes you can compile an ARM compatible keyboard on your machine using the MAKE flow.
+
+## Installing the software
+
+The main objective here is to get the MCU Eclipse IDE correcly installed on our machine. The necesarry instructions are derived from [this](https://gnu-mcu-eclipse.github.io/install/) install guide.
+
+### The xPack Manager
+
+This tool is a software package manager and it is used to help us get the necesarry depencencies.
+
+XPM runs using Node.js so grab that form [here](https://nodejs.org/en/). After installation, open a terminal and type `npm -v`. A reply with the version number means that the instalation was successful.
+
+XPM instalation instructions can be found [here](https://www.npmjs.com/package/xpm) and are OS specific. Entering `xpm --version` to your terminal should return the software version.
+
+### The ARM Toolchain
+
+Using XPM it is very easy to install the ARM toolchain. Enter the command `xpm install --global @gnu-mcu-eclipse/arm-none-eabi-gcc`.
+
+### Windows build tools
+
+If you are using windows you need to install this!
+
+`xpm install --global @gnu-mcu-eclipse/windows-build-tools`
+
+### Programer/Debugger Drivers
+
+Now its the time to install your programer's drivers. This tutorial was made using an ST-Link v2 which you can get from almost anywhere.
+If you have an ST-Link the drivers can be found [here](https://www.st.com/en/development-tools/stsw-link009.html) otherwise consult the manufuturer of your tool.
+
+### OpenOCD
+
+This dependency allows SWD access from GDB and it is essential for debugging. Run `xpm install --global @gnu-mcu-eclipse/openocd`.
+
+### Java
+
+Java is needed by Eclipse so please download it from [here](https://www.oracle.com/technetwork/java/javase/downloads/index.html).
+
+### GNU MCU Eclipse IDE
+
+Now its finally time to install the IDE. Use the Release page [here](https://github.com/gnu-mcu-eclipse/org.eclipse.epp.packages/releases/) to get the latest version.
+
+## Configuring Eclipse
+
+Open up the Eclipse IDE we just downloaded. To import our QMK directory select File -> Import -> C/C++ -> Existing code as Makefile Project. Select next and use Browse to select your QMK folder. In the tool-chain list select ARM Cross GCC and select Finish.
+
+Now you can see the QMK folder on the left hand side. Right click it and select Properties. On the left hand side, expand MCU and select ARM Toolchain Paths. Press xPack and OK. Repeat for OpenOCD Path  and if you are on windows for Build Tool Path. Select Apply and Close.
+
+Now its time to install the necessary MCU packages. Go to Packs perspective by selecting Window -> Open Perspective -> Others -> Packs. Now select the yellow refresh symbol next to the Packs tab. This will take a long time as it is requesting the MCU definitions from various places. If some of the links fail you can probably select Ignore.
+
+When this finishes you must find the MCU which we will be building/debugging for. In this example I will be using the STM32F3 series MCUs. On the left, select STMicroelectonics -> STM32F3 Series. On the middle window we can see the pack. Right click and select Install. Once that is done we can go back to the default perspective, Window -> Open Perspective -> Others -> C/C++.
+
+We need to let eclipse know the device we intent to build QMK on. Right click on the QMK folder -> Properties -> C/C++ Build -> Settings. Select the Devices tab and under devices select the appropriate variant of your MCU. For my example it is STM32F303CC
+
+While we are here let's setup the build command as well. Select C/C++ Build and then the Behavior tab. On the build command, replace `all` with your necessary make command. For example for a rev6 Planck with the default keymap this would be `planck/rev6:default`. Select Apply and Close.
+
+## Building
+
+If you have setup everything correctly pressing the hammer button should build the firmware for you and a .bin file should appear.
+
+## Debugging
+
+### Connecting the Debugger
+
+ARM MCUs use the Single Wire Debug (SWD) protocol which comprises of the clock (SWCLK) signal and the data (SWDIO) signal. Connecting this two wires and ground should be enough to allow full manipulation of the MCU. Here we assume that the keyboard will be powered though USB. The RESET signal is not necessary as we can manually assert it using the reset button. For a more advance setup, the SWO signal can be used which pipes printf and scanf asynchronously to the host but for our setup we will ignore it.
+
+NOTE: Make sure the SWCLK and SWDIO pins are not used in the matrix of your keyboard. If they are you can temporarily switch them for some other pins.
+
+### Configuring the Debugger
+
+Right click on your QMK folder, select Debug As -> Debug Configuration. Here double click on GDB OpenOCD Debugging. Select the debugger tab and enter the configuration necessary for your MCU. This might take some fiddling and googleing to find out. The default script for the STM32F3 is called stm32f3discovery.cfg. To let OpenOCD know, in the Config options enter `-f board/stm32f3discovery.cfg`.
+
+NOTE: In my case this configuration script requires editing to disable the reset assertion. The locations of the scripts can be found in the actual executable field usually under the path `openocd/version/.content/scripts/board`. Here I edited `reset_config srst_only` to `reset_config none`.
+
+Select Apply and Close.
+
+### Running the Debugger.
+
+Reset your keyboard.
+
+Press the bug icon and if all goes well you should soon find yourself in the debug perspective. Here the program counter will pause at the beginning of the main function and way for you to press Play. Most of the features of all debuggers work on ARM MCUs but for exact details google is your friend!
+
+
+Happy debugging!

docs/config_options.md

@@ -155,6 +155,10 @@ If you define these options you will enable the associated feature, which may in
     going to produce the 500 keystrokes a second needed to actually get more than a
     few ms of delay from this. But if you're doing chording on something with 3-4ms
     scan times? You probably want this.
+* `#define COMBO_COUNT 2`
+  * Set this to the number of combos that you're using in the [Combo](feature_combo.md) feature.
+* `#define COMBO_TERM 200`
+  * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
 
 ## RGB Light Configuration
 
@@ -234,6 +238,8 @@ Use these to enable or disable building certain features. The more you have enab
   * Console for debug(+400)
 * `COMMAND_ENABLE`
   * Commands for debug and configuration
+* `COMBO_ENABLE`
+  * Key combo feature
 * `NKRO_ENABLE`
   * USB N-Key Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 * `AUDIO_ENABLE`
@@ -245,7 +251,9 @@ Use these to enable or disable building certain features. The more you have enab
 * `UNICODE_ENABLE`
   * Unicode
 * `BLUETOOTH_ENABLE`
-  * Enable Bluetooth with the Adafruit EZ-Key HID
+  * Legacy option to Enable Bluetooth with the Adafruit EZ-Key HID. See BLUETOOTH
+* `BLUETOOTH`
+  * Current options are AdafruitEzKey, AdafruitBLE, RN42
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 * `WAIT_FOR_USB`

docs/contributing.md

@@ -57,14 +57,14 @@ Never made an open source contribution before? Wondering how contributions work
 Most of our style is pretty easy to pick up on, but right now it's not entirely consistent. You should match the style of the code surrounding your change, but if that code is inconsistent or unclear use the following guidelines:
 
 * We indent using two spaces (soft tabs)
-* We use One True Brace Style
+* We use a modified One True Brace Style
   * Opening Brace: At the end of the same line as the statement that opens the block
   * Closing Brace: Lined up with the first character of the statement that opens the block
   * Else If: Place the closing brace at the beginning of the line and the next opening brace at the end of the same line.
   * Optional Braces: Always include optional braces.
     * Good: if (condition) { return false; }
     * Bad: if (condition) return false;
-* We use C style comments: `/* */`
+* We encourage use of C style comments: `/* */`
   * Think of them as a story describing the feature
   * Use them liberally to explain why particular decisions were made.
   * Do not write obvious comments
@@ -72,6 +72,25 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely
 * In general we don't wrap lines, they can be as long as needed. If you do choose to wrap lines please do not wrap any wider than 76 columns.
 * We use `#pragma once` at the start of header files rather than old-style include guards (`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)
 
+Here is an example for easy reference:
+
+```c
+/* Enums for foo */
+enum foo_state {
+  FOO_BAR,
+  FOO_BAZ,
+};
+
+/* Returns a value */
+int foo(void) {
+  if (some_condition) {
+    return FOO_BAR;
+  } else {
+    return -1;
+  }
+}
+```
+
 # General Guidelines
 
 We have a few different types of changes in QMK, each requiring a different level of rigor. We'd like you to keep the following guidelines in mind no matter what type of change you're making.

docs/custom_quantum_functions.md

@@ -27,7 +27,7 @@ The first step to creating your own custom keycode(s) is to enumerate them. This
 
 Here is an example of enumerating 2 keycodes. After adding this block to your `keymap.c` you will be able to use `FOO` and `BAR` inside your keymap.
 
-```
+```c
 enum my_keycodes {
   FOO = SAFE_RANGE,
   BAR
@@ -44,7 +44,7 @@ These function are called every time a key is pressed or released.
 
 This example does two things. It defines the behavior for a custom keycode called `FOO`, and it supplements our Enter key by playing a tone whenever it is pressed.
 
-```
+```c
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
     case FOO:
@@ -75,16 +75,16 @@ The `keycode` argument is whatever is defined in your keymap, eg `MO(1)`, `KC_L`
 
 The `record` argument contains information about the actual press:
 
-```
+```c
 keyrecord_t record {
-+-keyevent_t event {
-| +-keypos_t key {
-| | +-uint8_t col
-| | +-uint8_t row
-| | }
-| +-bool     pressed
-| +-uint16_t time
-| }
+  keyevent_t event {
+    keypos_t key {
+      uint8_t col
+      uint8_t row
+    }
+    bool     pressed
+    uint16_t time
+  }
 }
 ```
 
@@ -100,7 +100,7 @@ This allows you to control the 5 LED's defined as part of the USB Keyboard spec.
 
 ### Example `led_set_user()` Implementation
 
-```
+```c
 void led_set_user(uint8_t usb_led) {
     if (usb_led & (1<<USB_LED_NUM_LOCK)) {
         PORTB |= (1<<0);
@@ -117,12 +117,12 @@ void led_set_user(uint8_t usb_led) {
     } else {
         PORTB &= ~(1<<2);
     }
-    if (usb_led & (1<<USB_LED_COMPOSE_LOCK)) {
+    if (usb_led & (1<<USB_LED_COMPOSE)) {
         PORTB |= (1<<3);
     } else {
         PORTB &= ~(1<<3);
     }
-    if (usb_led & (1<<USB_LED_KANA_LOCK)) {
+    if (usb_led & (1<<USB_LED_KANA)) {
         PORTB |= (1<<4);
     } else {
         PORTB &= ~(1<<4);
@@ -138,14 +138,14 @@ void led_set_user(uint8_t usb_led) {
 
 # Matrix Initialization Code
 
-Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i&#xb2;c controllers you will need to set up that hardware before it can be used.  
+Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i&#xb2;c controllers you will need to set up that hardware before it can be used.
 
 
 ### Example `matrix_init_user()` Implementation
 
 This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
 
-```
+```c
 void matrix_init_user(void) {
   // Call the keymap level matrix init.
 
@@ -181,16 +181,16 @@ You should use this function if you need custom matrix scanning code. It can als
 
 # Keyboard Idling/Wake Code
 
-If the board supports it, it can be "idled", by stopping a number of functions.  A good example of this is RGB lights or backlights.   This can save on power consumption, or may be better behavior for your keyboard.  
+If the board supports it, it can be "idled", by stopping a number of functions.  A good example of this is RGB lights or backlights.   This can save on power consumption, or may be better behavior for your keyboard.
 
-This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_init_*`, which are called when the system is board is idled and when it wakes up, respectively. 
+This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_init_*`, which are called when the system is board is idled and when it wakes up, respectively.
 
 
 ### Example suspend_power_down_user() and suspend_wakeup_init_user() Implementation
 
 This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
 
-```
+```c
 void suspend_power_down_user(void)
 {
     rgb_matrix_set_suspend_state(true);
@@ -210,13 +210,13 @@ void suspend_wakeup_init_user(void)
 
 # Layer Change Code
 
-This runs code every time that the layers get changed.  This can be useful for layer indication, or custom layer handling. 
+This runs code every time that the layers get changed.  This can be useful for layer indication, or custom layer handling.
 
 ### Example `layer_state_set_*` Implementation
 
 This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example
 
-```
+```c
 uint32_t layer_state_set_user(uint32_t state) {
     switch (biton32(state)) {
     case _RAISE:
@@ -244,3 +244,143 @@ uint32_t layer_state_set_user(uint32_t state) {
 * Keymap: `uint32_t layer_state_set_user(uint32_t state)`
 
 The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)
+
+
+# Persistent Configuration (EEPROM)
+
+This allows you to configure persistent settings for your keyboard.  These settings are stored in the EEPROM of your controller, and are retained even after power loss. The settings can be read with `eeconfig_read_kb` and `eeconfig_read_user`, and can be written to using `eeconfig_update_kb` and `eeconfig_update_user`. This is useful for features that you want to be able to toggle (like toggling rgb layer indication).  Additionally, you can use `eeconfig_init_kb` and `eeconfig_init_user` to set the default values for the EEPROM. 
+
+The complicated part here, is that there are a bunch of ways that you can store and access data via EEPROM, and there is no "correct" way to do this.  However, you only have a DWORD (4 bytes) for each function.
+
+Keep in mind that EEPROM has a limited number of writes. While this is very high, it's not the only thing writing to the EEPROM, and if you write too often, you can potentially drastically shorten the life of your MCU.
+
+* If you don't understand the example, then you may want to avoid using this feature, as it is rather complicated. 
+
+### Example  Implementation
+
+This is an example of how to add settings, and read and write it. We're using the user keymap for the example here.  This is a complex function, and has a lot going on.  In fact, it uses a lot of the above functions to work! 
+
+
+In your keymap.c file, add this to the top:
+```
+typedef union {
+  uint32_t raw;
+  struct {
+    bool     rgb_layer_change :1;
+  };
+} user_config_t;
+
+user_config_t user_config;
+```
+
+This sets up a 32 bit structure that we can store settings with in memory, and write to the EEPROM. Using this removes the need to define variables, since they're defined in this structure. Remember that `bool` (boolean) values use 1 bit, `uint8_t` uses 8 bits, `uint16_t` uses up 16 bits.  You can mix and match, but changing the order can cause issues, as it will change the values that are read and written. 
+
+We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `matrix_init_user` and `process_record_user` to configure everything. 
+
+Now, using the `matrix_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap.  And It should look like: 
+```
+void matrix_init_user(void) {
+  // Call the keymap level matrix init.
+
+  // Read the user config from EEPROM
+  user_config.raw = eeconfig_read_user();
+
+  // Set default layer, if enabled
+  if (user_config.rgb_layer_change) {
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_noeeprom_cyan(); 
+    rgblight_mode_noeeprom(1);
+  }
+}
+```
+The above function will use the EEPROM config immediately after reading it, to set the default layer's RGB color. The "raw" value of it is converted in a usable structure based on the "union" that you created above. 
+
+```
+uint32_t layer_state_set_user(uint32_t state) {
+    switch (biton32(state)) {
+    case _RAISE:
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); }
+        break;
+    case _LOWER:
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_red(); rgblight_mode_noeeprom(1); }
+        break;
+    case _PLOVER:
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_green(); rgblight_mode_noeeprom(1); }
+        break;
+    case _ADJUST:
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_white(); rgblight_mode_noeeprom(1); }
+        break;
+    default: //  for any other layers, or the default layer
+        if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_cyan(); rgblight_mode_noeeprom(1); }
+        break;
+    }
+  return state;
+}
+```
+This will cause the RGB underglow to be changed ONLY if the value was enabled.  Now to configure this value, create a new keycode for `process_record_user` called `RGB_LYR` and `EPRM`. Additionally, we want to make sure that if you use the normal RGB codes, that it turns off  Using the example above, make it look this:
+```
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case FOO:
+      if (record->event.pressed) {
+        // Do something when pressed
+      } else {
+        // Do something else when release
+      }
+      return false; // Skip all further processing of this key
+    case KC_ENTER:
+        // Play a tone when enter is pressed
+        if (record->event.pressed) {
+            PLAY_NOTE_ARRAY(tone_qwerty);
+        }
+        return true; // Let QMK send the enter press/release events
+    case EPRM:
+        if (record->event.pressed) {
+            eeconfig_init(); // resets the EEPROM to default
+        }
+        return false;
+    case RGB_LYR:  // This allows me to use underglow as layer indication, or as normal
+        if (record->event.pressed) { 
+            user_config.rgb_layer_change ^= 1; // Toggles the status
+            eeconfig_update_user(user_config.raw); // Writes the new status to EEPROM
+            if (user_config.rgb_layer_change) { // if layer state indication is enabled, 
+                layer_state_set(layer_state);   // then immediately update the layer color
+            }
+        }
+        return false; break;
+    case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // For any of the RGB codes (see quantum_keycodes.h, L400 for reference)
+        if (record->event.pressed) { //This disables layer indication, as it's assumed that if you're changing this ... you want that disabled
+            if (user_config.rgb_layer_change) {        // only if this is enabled 
+                user_config.rgb_layer_change = false;  // disable it, and 
+                eeconfig_update_user(user_config.raw); // write the setings to EEPROM
+            }
+        }
+        return true; break;
+    default:
+      return true; // Process all other keycodes normally
+  }
+}
+```
+And lastly, you want to add the `eeconfig_init_user` function, so that when the EEPROM is reset, you can specify default values, and even custom actions. For example, if you want to set rgb layer indication by default, and save the default valued. 
+
+```
+void eeconfig_init_user(void) {  // EEPROM is getting reset! 
+  user_config.rgb_layer_change = true; // We want this enabled by default
+  eeconfig_update_user(user_config.raw); // Write default value to EEPROM now
+
+  // use the non noeeprom versions, to write these values to EEPROM too
+  rgblight_enable(); // Enable RGB by default
+  rgblight_sethsv_cyan();  // Set it to CYAN by default
+  rgblight_mode(1); // set to solid by default
+}
+```
+
+And you're done.  The RGB layer indication will only work if you want it to. And it will be saved, even after unplugging the board. And if you use any of the RGB codes, it will disable the layer indication, so that it stays on the mode and color that you set it to. 
+
+### 'EECONFIG' Function Documentation
+
+* Keyboard/Revision: `void eeconfig_init_kb(void)`, `uint32_t eeconfig_read_kb(void)` and `void eeconfig_update_kb(uint32_t val)`
+* Keymap: `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)` and `void eeconfig_update_user(uint32_t val)`
+
+The `val` is the value of the data that you want to write to EEPROM.  And the `eeconfig_read_*` function return a 32 bit (DWORD) value from the EEPROM. 

docs/documentation_templates.md

@@ -36,7 +36,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make planck/rev4:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 ```
 
 There needs to be two spaces at the end of the `Keyboard Maintainer` and `Hardware Supported` lines for it to render correctly with Markdown.

docs/feature_advanced_keycodes.md

@@ -26,7 +26,8 @@ These functions allow you to activate layers in various ways. Note that layers a
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
 * `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
-* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped.
+* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
+* `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys](#one-shot-keys) for details and additional functionality.
 * `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
 * `TO(layer)` - activates *layer* and de-activates all other layers (except your default layer). This function is special, because instead of just adding/removing one layer to your active layer stack, it will completely replace your current active layers, uniquely allowing you to replace higher layers with a lower one. This is activated on keydown (as soon as the key is pressed).
 * `TT(layer)` - Layer Tap-Toggle. If you hold the key down, *layer* is activated, and then is de-activated when you let go (like `MO`). If you repeatedly tap it, the layer will be toggled on or off (like `TG`). It needs 5 taps by default, but you can change this by defining `TAPPING_TOGGLE` -- for example, `#define TAPPING_TOGGLE 2` to toggle on just two taps.

docs/feature_bluetooth.md

@@ -1,10 +1,40 @@
 # Bluetooth
 
-## Bluetooth Functionality
+## Bluetooth Known Supported Hardware
 
+Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1 Qmk has support for RN-42 HID Firmware and Bluefruit EZ Key the later of which is not produced anymore. For more recent BLE protocols currently only the Adafruit Bluefruit SPI friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support Mouse Input.
+
+|Board                                                           |Bluetooth Protocol          |Connection Type |Rules.mk                   |Bluetooth Chip|
+|----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
+|[Adafruit EzKey HID]("https://www.adafruit.com/product/1535")   |Bluetooth Classic           | UART           | BLUETOOTH = AdafruitEZKey |              |
+|Rover Networks RN-42 (Sparkfun Bluesmirf)                       |Bluetooth Classic           | UART           | BLUETOOTH = RN42          | RN-42        |
+|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy        | SPI            | BLUETOOTH = AdafruitBLE   | nRF5182      |
+
+Not Supported Yet but possible:
+* [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514)
+* HC-05 boards flashed with RN-42 firmware. They apparently both use the CSR BC417 Chip. Flashing it with RN-42 firmware gives it HID capability.
+* [Sparkfun Bluetooth mate](https://www.sparkfun.com/products/14839)
+* HM-13 based boards
+
+### Adafruit BLE SPI Friend
+Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF5182 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines:
+* #define AdafruitBleResetPin D4
+* #define AdafruitBleCSPin    B4
+* #define AdafruitBleIRQPin   E6
+
+A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip.
+
+## Adafruit EZ-Key hid
 This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will.
 
+
 <!-- FIXME: Document bluetooth support more completely. -->
+## Bluetooth Rules.mk Options
+Use only one of these
+* BLUETOOTH_ENABLE = yes (Legacy Option)
+* BLUETOOTH = RN42
+* BLUETOOTH = AdafruitEZKey
+* BLUETOOTH = AdafruitBLE
 
 ## Bluetooth Keycodes
 

docs/feature_combo.md

@@ -0,0 +1,88 @@
+# Combos
+
+The Combo feature is a chording type solution for adding custom actions.  It lets you hit multiple keys at once and produce a different effect.  For instance, hitting `A` and `S` within the tapping term would hit `ESC` instead, or have it perform even more complex tasks.
+
+To enable this feature, yu need to add `COMBO_ENABLE = yes` to your `rules.mk`.
+
+Additionally, in your `config.h`, you'll need to specify the number of combos that you'll be using, by adding `#define COMBO_COUNT 1` (replacing 1 with the number that you're using).
+<!-- At this time, this is necessary -->
+
+Also, by default, the tapping term for the Combos is set to the same value as `TAPPING_TERM` (200 by default on most boards). But you can specify a different value by defining it in your `config.h`.  For instance: `#define COMBO_TERM 300` would set the time out period for combos to 300ms.
+
+Then, your `keymap.c` file, you'll need to define a sequence of keys, terminated with `COMBO_END`, and a structure to list the combination of keys, and it's resulting action.
+
+```c
+const uint16_t PROGMEM test_combo[] = {KC_A, KC_B, COMBO_END};
+combo_t key_combos[COMBO_COUNT] = {COMBO(test_combo, KC_ESC)};
+```
+
+This will send "Escape" if you hit the A and B keys.
+
+!> This method only supports [basic keycodes](keycodes_basic.md). See the examples for more control.
+
+## Examples
+
+If you want to add a list, then you'd use something like this:
+
+```c
+enum combos {
+  AB_ESC,
+  JK_TAB
+}
+const uint16_t PROGMEM ab_combo[] = {KC_A, KC_B, COMBO_END};
+const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END};
+
+combo_t key_combos[COMBO_COUNT] = {
+  [AB_ESC] = COMBO(ab_combo, KC_ESC),
+  [JK_TAB] = COMBO(jk_combo, KC_TAB)
+};
+```
+
+For a more complicated implementation, you can use the `process_combo_event` function to add custom handling.
+
+```c
+enum combo_events {
+  ZC_COPY,
+  ZV_PASTE
+  };
+
+const uint16_t PROGMEM copy_combo[] = {KC_Z, KC_C, COMBO_END};
+const uint16_t PROGMEM paste_combo[] = {KC_Z, KC_V, COMBO_END};
+
+combo_t key_combos[COMBO_COUNT] = {
+  [ZC_COPY] = COMBO_ACTION(copy_combo),
+  [ZV_PASTE] = COMBO_ACTION(paste_combo),
+};
+
+void process_combo_event(uint8_t combo_index, bool pressed) {
+  switch(combo_index) {
+    case ZC_COPY:
+      if (pressed) {
+        register_code(KC_LCTL);
+        register_code(KC_C);
+        unregister_code(KC_C);
+        unregister_code(KC_LCTL);
+      }
+      break;
+
+    case ZV_PASTE:
+      if (pressed) {
+        register_code(KC_LCTL);
+        register_code(KC_V);
+        unregister_code(KC_V);
+        unregister_code(KC_LCTL);
+      }
+      break;
+  }
+}
+```
+
+This will send Ctrl+C if you hit Z and C, and Ctrl+V if you hit Z and V.  But you could change this to do stuff like change layers, play sounds, or change settings.
+
+## Additional Configuration
+
+If you're using long combos, or even longer combos, you may run into issues with this, as the structure may not be large enough to accommodate what you're doing.
+
+In this case, you can add either `#define EXTRA_LONG_COMBOS` or `#define EXTRA_EXTRA_LONG_COMBOS` in your `config.h` file.
+
+You may also be able to enable action keys by defining `COMBO_ALLOW_ACTION_KEYS`.

docs/feature_macros.md

@@ -228,6 +228,10 @@ This sends the `<kc>` keydown event to the computer. Some examples would be `KC_
 
 Parallel to `register_code` function, this sends the `<kc>` keyup event to the computer. If you don't use this, the key will be held down until it's sent.
 
+### `tap_code(<kc>);`
+
+This will send `register_code(<kc>)` and then `unregister_code(<kc>)`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it).
+
 ### `clear_keyboard();`
 
 This will clear all mods and keys currently pressed.

docs/feature_rgb_matrix.md

@@ -140,6 +140,7 @@ These are the effects that are currently available:
 	    RGB_MATRIX_RAINBOW_PINWHEELS,
 	    RGB_MATRIX_RAINBOW_MOVING_CHEVRON,
 	    RGB_MATRIX_JELLYBEAN_RAINDROPS,
+	    RGB_MATRIX_DIGITAL_RAIN,
 	#ifdef RGB_MATRIX_KEYPRESSES
 	    RGB_MATRIX_SOLID_REACTIVE,
 	    RGB_MATRIX_SPLASH,

docs/feature_rgblight.md

@@ -96,9 +96,10 @@ if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a n
 |`RGBLIGHT_MODE_RGB_TEST`     | *None*            |RGB Test                               |
 |`RGBLIGHT_MODE_ALTERNATING`  | *None*            |Alternating                            |
 
-
 Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration.
 
+Note: For versions older than 0.6.117, The mode numbers were written directly. In `quantum/rgblight.h` there is a contrast table between the old mode number and the current symbol.
+
 The following options can be used to tweak the various animations:
 
 |Define                              |Default      |Description                                                                          |

docs/feature_unicode.md

@@ -4,40 +4,108 @@ There are three Unicode keymap definition method available in QMK:
 
 ## UNICODE_ENABLE
 
-Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in
-keymap file, where *n* is a 4 digit hexadecimal.
+Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in keymap file, where *n* is a 4 digit hexadecimal.
 
 ## UNICODEMAP_ENABLE
 
-Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping
-table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file.
-The keycode function is `X(n)` where *n* is the array index of the mapping
-table.
+Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(n)` where *n* is the array index of the mapping table.
+
+And you may want to have an enum to make reference easier.  So you'd want to add something like this to your keymap:
+
+```c
+enum unicode_name {
+  BANG, // ‽
+  IRONY, // ⸮
+  SNEK // snke 🐍
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+  [BANG]      = 0x0203D, // ‽
+  [IRONY]     = 0x02E2E, // ⸮
+  [SNEK]      = 0x1F40D // snke 🐍
+}:
+```
+
+Make sure that the order for both matches.
 
 ## UCIS_ENABLE
 
-TBD
+Supports Unicode up to 0xFFFFFFFF. As with `UNICODE_MAP`, you may want to main a mapping table in your keymap file.  However, there is no keycodes for this feature, you will have to add a keycode or function to call `qk_ucis_start()`. Once you've run that, you can just type the text for your unicode, and then hit space or enter to complete it, or ESC to cancel it. And if it matches an entry in your table, it will automatically "backspace" the trigger word (from your table) and then will input the unicode sequence.
 
-Unicode input in QMK works by inputing a sequence of characters to the OS,
-sort of like macro. Unfortunately, each OS has different ideas on how Unicode is inputted.
+For instance, you would need to have a table like this in your keymap:
+
+```c
+const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
+(
+ UCIS_SYM("poop", 0x1f4a9),
+ UCIS_SYM("rofl", 0x1f923),
+ UCIS_SYM("kiss", 0x1f619)
+);
+```
+
+You run the function, and then type "rofl" and hit enter, it should backspace remove "rofl" and input the `0x1f923` unicode.
+
+### Customization
+
+There are several functions that you can add to your keymap to customize the functionality of this feature.
+
+* `void qk_ucis_start_user(void)` - This runs when you run the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
+* `void qk_ucis_success(uint8_t symbol_index)` - This runs when the unicode input has matched something, and has completed. Default doesn't do anything.
+* `void qk_ucis_symbol_fallback (void)` - This runs if the input text doesn't match anything.  The default function falls back to trying that input as a unicode code.
+
+The default code for these are:
+
+```c
+void qk_ucis_start_user(void) { // outputs keyboard emoji
+  unicode_input_start();
+  register_hex(0x2328);
+  unicode_input_finish();
+}
+
+void qk_ucis_success(uint8_t symbol_index) {
+}
+
+void qk_ucis_symbol_fallback (void) { // falls back to manual unicode entry
+  for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) {
+    uint8_t code = qk_ucis_state.codes[i];
+    register_code(code);
+    unregister_code(code);
+    wait_ms(UNICODE_TYPE_DELAY);
+  }
+}
+```
+
+## Unicode Input methods
+
+Unicode input in QMK works by inputting a sequence of characters to the OS,
+sort of like macro. Unfortunately, each OS has different ideas on how Unicode is input.
 
 This is the current list of Unicode input method in QMK:
 
-* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
-* UC_OSX_RALT: Same as UC_OSX, but sends the Right Alt key for unicode input
-* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
-* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
-* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
+* __UC_OSX__: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
+* __UC_OSX_RALT__: Same as UC_OSX, but sends the Right Alt key for unicode input
+* __UC_LNX__: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
+* __UC_WIN__: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
+* __UC_WINC__: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
 
-# Additional Language Support
+At some point, you need to call `set_unicode_input_mode(x)` to set the correct unicode method.  This sets the method that is used to send the unicode, and stores it in EEPROM, so you only need to call this once.
+
+## `send_unicode_hex_string`
+
+To type multiple characters for things like (ノಠ痊ಠ)ノ彡┻━┻, you can use `send_unicode_hex_string()` much like `SEND_STRING()` except you would use hex values separate by spaces.
+For example, the table flip seen above would be `send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B")`
+
+There are many ways to get a hex code, but an easy one is [this site](https://r12a.github.io/app-conversion/). Just make sure to convert to hexadecimal, and that is your string.
+
+## Additional Language Support
 
 In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware.
 
-# International Characters on Windows
+## International Characters on Windows
 
-[AutoHotkey](https://autohotkey.com) allows Windows users to create custom hotkeys among others.
+### AutoHotkey allows Windows users to create custom hotkeys among others.
 
-The method does not require Unicode support in the keyboard itself but depends instead of AutoHotkey running in the background.
+The method does not require Unicode support in the keyboard itself but depends instead of [AutoHotkey](https://autohotkey.com) running in the background.
 
 First you need to select a modifier combination that is not in use by any of your programs.
 CtrlAltWin is not used very widely and should therefore be perfect for this.
@@ -52,3 +120,11 @@ In the default script of AutoHotkey you can define custom hotkeys.
 
 The hotkeys above are for the combination CtrlAltGui and CtrlAltGuiShift plus the letter a.
 AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
+
+### US International
+
+If you enable the US International layout on the system, it will use punctuation to accent the characters. 
+
+For instance, typing "`a" will result in à.
+
+You can find details on how to enable this [here](https://support.microsoft.com/en-us/help/17424/windows-change-keyboard-layout).

docs/feature_userspace.md

@@ -5,15 +5,12 @@ If you use more than one keyboard with a similar keymap, you might see the benef
 * `/users/<name>/` (added to the path automatically)
   * `readme.md` (optional, recommended)
   * `rules.mk` (included automatically)
+  * `config.h` (included automatically)
   * `<name>.h` (optional)
   * `<name>.c` (optional)
-  * `config.h` (optional)
+  * `cool_rgb_stuff.c` (optional)
+  * `cool_rgb_stuff.h` (optional)
 
-`<name>.c` will need to be added to the SRC in `rules.mk` like this:
-
-    SRC += <name>.c
-
-Additional files may be added in the same way - it's recommended you have one named `<name>`.c/.h though.
 
 All this only happens when you build a keymap named `<name>`, like this:
 
@@ -23,82 +20,179 @@ For example,
 
     make planck:jack
 
-Will include the `/users/jack/` folder in the path, along with `/users/jack/rules.mk`.
+Will include the `/users/jack/` folder in the path, along with `/users/jack/rules.mk`.  
+
+!> This `name` can be [overridden](#override-default-userspace), if needed.  
+
+## `Rules.mk`
+
+The `rules.mk` is one of the two files that gets processed automatically.  This is how you add additional source files (such as  `<name>.c`) will be added when compiling.
+
+It's highly recommended that you use `<name>.c` as the default source file to be added. And to add it, you need to add it the SRC in `rules.mk` like this:
+
+    SRC += <name>.c
+
+Additional files may be added in the same way - it's recommended you have one named `<name>`.c/.h to start off with, though. 
+
+The `/users/<name>/rules.mk` file will be included in the build _after_ the `rules.mk` from your keymap. This allows you to have features in your userspace `rules.mk` that depend on individual QMK features that may or may not be available on a specific keyboard. 
+
+For example, if you have RGB control features shared between all your keyboards that support RGB lighting, you can add support for that if the RGBLIGHT feature is enabled:
+```make
+ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
+  # Include my fancy rgb functions source here
+  SRC += cool_rgb_stuff.c
+endif
+```
+
+Alternatively, you can `define RGB_ENABLE` in your keymap's `rules.mk` and then check for the variable in your userspace's `rules.mk` like this:
+```make
+ifdef RGB_ENABLE
+  # Include my fancy rgb functions source here
+  SRC += cool_rgb_stuff.c
+endif
+```
+
+### Override default userspace
+
+By default the userspace used will be the same as the keymap name. In some situations this isn't desirable. For instance, if you use the [layout](feature_layouts.md) feature you can't use the same name for different keymaps (e.g. ANSI and ISO). You can name your layouts `mylayout-ansi` and `mylayout-iso` and add the following line to your layout's `rules.mk`:
+
+```
+USER_NAME := mylayout
+```
+
+This is also useful if you have multiple different keyboards with different features physically present on the board (such as one with RGB Lights, and one with Audio, or different number of LEDs, or connected to a different PIN on the controller).
+
+## Configuration Options (`config.h`)
 
 Additionally, `config.h` here will be processed like the same file in your keymap folder.  This is handled separately from the `<name>.h` file.
 
 The reason for this, is that `<name>.h` won't be added in time to add settings (such as `#define TAPPING_TERM 100`), and including the `<name.h>` file in any `config.h` files will result in compile issues.
 
-So you should use the `config.h` for QMK settings, and the `<name>.h` file for user or keymap specific settings.
+!>You should use the `config.h` for [configuration options](config_options.md), and the `<name>.h` file for user or keymap specific settings (such as the enum for layer or keycodes)
 
-`/users/<name>/rules.mk` will be included in the build _after_ the `rules.mk` from your keymap. This allows you to have features in your userspace `rules.mk` that depend on individual QMK features that may or may not be available on a specific keyboard. For example, if you have RGB control features shared between all your keyboards that support RGB lighting, you can `define RGB_ENABLE` in your keymap `rules.mk` and then check for the variable in your userspace `rules.mk` like this:
-```make
-ifdef RGB_ENABLE
-    # Include my fancy rgb functions source here
-endif
-```
-Because of this, any time you turn on QMK features in your `users/<name>/rules.mk`, you should conditionally enable them only if the flag isn't already defined, like this:
-```make
-ifndef TAP_DANCE_ENABLE
-    TAP_DANCE_ENABLE = yes
-endif
-```
-This will ensure that you can explicitly turn off features for an individual keymap.
 
-## Readme
+## Readme (`readme.md`)
 
 Please include authorship (your name, github username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
 
-## `Config.h`
+You can use this as a template: 
+```
+Copyright <year> <name> <email> @<github_username>
 
-If you do add a `config,h` file, you want to make sure that it only gets processed once.  So you may want to start off with something like this:
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
 
-```c
-#ifndef USERSPACE_CONFIG_H
-#define USERSPACE_CONFIG_H
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
 
-// Put normal config.h settings here:
-
-#endif // !USERSPACE_CONFIG_H
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
 ```
 
-You can use any option hre that you could use in your keymap's `config.h` file. You can find a list of vales [here](config_options.md).
+You'd want to replace the year, name, email and github username with your info. 
 
-## Example
+Additionally, this is a good place to document your code, if you wish to share it with others. 
 
-For a brief example, checkout `/users/_example/` , or for a more detailed examples check out [`template.h`](https://github.com/qmk/qmk_firmware/blob/master/users/drashna/template.h) and [`template.c`](https://github.com/qmk/qmk_firmware/blob/master/users/drashna/template.c) in `/users/drashna/` .
+# Examples
 
-### Consolidated Macros
+For a brief example, checkout [`/users/_example/`](https://github.com/qmk/qmk_firmware/tree/master/users/drashna).  
+For a more complicated example, checkout [`/users/drashna/`](https://github.com/qmk/qmk_firmware/tree/master/users/drashna)'s userspace.
 
-If you wanted to consolidate macros and other functions into your userspace for all of your keymaps, you can do that.  The issue is that you then cannot call any function defined in your userspace, or it gets complicated.  To better handle this, you can call the functions here and create new functions to use in individual keymaps.
+
+## Customized Functions
+
+QMK has a bunch of [functions](custom_quantum_functions.md) that have [`_quantum`, `_kb`, and `_user` versions](custom_quantum_functions.md#a-word-on-core-vs-keyboards-vs-keymap) that you can use.  You will pretty much always want to use the user version of these functions.  But the problem is that if you use them in your userspace, then you don't have a version that you can use in your keymap. 
+
+However, you can actually add support for keymap version, so that you can use it in both your userspace and your keymap! 
+
+
+For instance, lets looks at the `layer_state_set_user` function.  Lets enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionalitly to all of our boards, and then still have your `keymap.c` still able to use this functionality. 
+
+In your `<name.c>` file, you'd want to add this: 
+```c
+__attribute__ ((weak))
+uint32_t layer_state_set_keymap (uint32_t state) {
+  return state;
+}
+
+uint32_t layer_state_set_user (uint32_t state) {
+  state = update_tri_layer_state(state, 2, 3, 5);
+  return layer_state_set_keymap (state);
+}
+```
+The `__attribute__ ((weak))` part tells the compiler that this is a placeholder function that can then be replaced by a version in your `keymap.c`.  That way, you don't need to add it to your `keymap.c`, but if you do, you won't get any conflicts because the function is the same name. 
+
+The `_keymap` part here doesn't matter, it just needs to be something other than `_quantum`, `_kb`, or `_user`, since those are already in use. So you could use `layer_state_set_mine`, `layer_state_set_fn`, or anything else.
+
+You can see a list of this and other common functions in [`template.c`](https://github.com/qmk/qmk_firmware/blob/master/users/drashna/template.c) in [`users/drashna`](https://github.com/qmk/qmk_firmware/tree/master/users/drashna).
+
+## Custom Features
+
+Since the Userspace feature can support a staggering number of boards, you may have boards that you want to enable certain functionality for, but not for others. And you can actually create "features" that you can enable or disable in your own userspace.  
+
+For instance, if you wanted to have a bunch of macros available, but only on certain boards (to save space), you could "hide" them being a `#ifdef MACROS_ENABLED`, and then enable it per board.  To do this, add this to your rules.mk
+```make
+ifeq ($(strip $(MACROS_ENABLED)), yes)
+    OPT_DEFS += -DMACROS_ENABLED
+endif
+```
+The `OPT_DEFS` setting causes `MACROS_ENABLED` to be defined for your keyboards (note the `-D` in front of the name), and you could use `#ifdef MACROS_ENABLED` to check the status in your c/h files, and handle that code based on that. 
+
+Then you add `MACROS_ENABLED = yes` to the `rules.mk` for you keymap to enable this feature and the code in your userspace.
+
+And in your `process_record_user` function, you'd do something like this: 
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+#ifdef MACROS_ENABLED
+  case MACRO1:
+    if (!record->event.pressed) {
+      SEND_STRING("This is macro 1!");
+    }
+    break;
+  case MACRO2:
+    if (!record->event.pressed) {
+      SEND_STRING("This is macro 2!");
+    }
+    break;
+#endif
+  }
+  return true;
+}
+```
+
+
+## Consolidated Macros
+
+If you wanted to consolidate macros and other functions into your userspace for all of your keymaps, you can do that.  This builds upon the [Customized Functions](#customized-functions) example above. This lets you maintain a bunch of macros that are shared between the different keyboards, and allow for keyboard specific macros, too. 
 
 First, you'd want to go through all of your `keymap.c` files and replace `process_record_user` with `process_record_keymap` instead.   This way, you can still use keyboard specific codes on those boards, and use your custom "global" keycodes as well.   You'll also want to replace `SAFE_RANGE` with `NEW_SAFE_RANGE` so that you wont have any overlapping keycodes
 
 Then add `#include <name.h>` to all of your keymap.c files.  This allows you to use these new keycodes without having to redefine them in each keymap.
 
 Once you've done that, you'll want to set the keycode definitions that you need to the `<name>.h`  file. For instance:
-```
-#ifndef USERSPACE
-#define USERSPACE
+```c
+#pragma once
 
 #include "quantum.h"
+#include "action.h"
+#include "version.h"
 
 // Define all of
 enum custom_keycodes {
   KC_MAKE = SAFE_RANGE,
   NEW_SAFE_RANGE  //use "NEW_SAFE_RANGE" for keymap specific codes
 };
-
-#endif
 ```
 
 Now you want to create the `<name>.c` file, and add this content to it:
 
-```
+```c
 #include "<name>.h"
-#include "quantum.h"
-#include "action.h"
-#include "version.h"
 
 __attribute__ ((weak))
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
@@ -126,14 +220,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 }
 ```
 
-This will add a new `KC_MAKE`  keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap">`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
+This will add a new `KC_MAKE` keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap>`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
 
 Additionally, this should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely (and will dump the HEX in the ".build" folder instead).
 
-## Override default userspace
 
-By default the userspace used will be the same as the keymap name. In some situations this isn't desirable. For instance, if you use the [layout](feature_layouts.md) feature you can't use the same name for different keymaps (e.g. ANSI and ISO). You can name your layouts `mylayout-ansi` and `mylayout-iso` and add the following line to your layout's `rules.mk`:
-
-```
-USER_NAME := mylayout
-```

docs/flashing.md

@@ -2,7 +2,7 @@
 
 There are quite a few different types of bootloaders that keyboards use, and just about all of the use a different flashing method. Luckily, projects like the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) aim to be compatible with all the different types without having to think about it much, but this article will describe the different types of bootloaders, and available methods for flashing them.
 
-If you have a bootloader selected with the `BOOTLOADER` variable in your `rules.mk`, QMK will automatically calculate if your .hex file is the right size to be flashed to the device, and output the total size it bytes (along with the max). To run this process manually, compile with the target `check-size`, eg `make planck/rev4:default:check-size`.
+If you have a bootloader selected with the `BOOTLOADER` variable in your `rules.mk`, QMK will automatically calculate if your .hex file is the right size to be flashed to the device, and output the total size in bytes (along with the max). To run this process manually, compile with the target `check-size`, eg `make planck/rev4:default:check-size`.
 
 ## DFU
 
@@ -78,6 +78,12 @@ or
 
     make <keyboard>:<keymap>:avrdude
 
+or if you want to flash multiple boards, use the following command
+
+    make <keyboard>:<keymap>:avrdude-loop
+
+When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
+
 ## Halfkay
 
 Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0).

docs/getting_started_github.md

@@ -8,7 +8,7 @@ Start on the [QMK Github page](https://github.com/qmk/qmk_firmware), and you'll
 
 ![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
 
-If you're apart of an organization, you'll need to choose which account to fork it to. In most circumstances, you'll want to fork it to your personal account. Once your fork is completed (sometimes this takes a little while), click the "Clone or Download" button:
+If you're a part of an organization, you'll need to choose which account to fork it to. In most circumstances, you'll want to fork it to your personal account. Once your fork is completed (sometimes this takes a little while), click the "Clone or Download" button:
 
 ![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
 

docs/hardware_avr.md

@@ -8,7 +8,7 @@ If you have not yet you should read the [Keyboard Guidelines](hardware_keyboard_
 
 QMK has a number of features to simplify working with AVR keyboards. For most keyboards you don't have to write a single line of code. To get started run the `util/new_project.sh` script:
 
-```
+```bash
 $ util/new_project.sh my_awesome_keyboard
 ######################################################
 # /keyboards/my_awesome_keyboard project created. To start
@@ -30,7 +30,7 @@ This is where all the custom logic for your keyboard goes. Many keyboards do not
 
 This is the file you define your [Layout Macro(s)](feature_layouts.md) in. At minimum you should have a `#define LAYOUT` for your keyboard that looks something like this:
 
-```
+```c
 #define LAYOUT(          \
       k00, k01, k02,     \
       k10,   k11         \
@@ -57,7 +57,7 @@ At the top of the `config.h` you'll find USB related settings. These control how
 
 Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately reflect your keyboard.
 
-```
+```c
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
@@ -72,14 +72,14 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
 
 The next section of the `config.h` file deals with your keyboard's matrix. The first thing you should set is the matrix's size. This is usually, but not always, the same number of rows and columns as the physical key arrangement.
 
-```
+```c
 #define MATRIX_ROWS 2
 #define MATRIX_COLS 3
 ```
 
 Once you've defined the size of your matrix you need to define which pins on your MCU are connected to rows and columns. To do so simply specify the names of those pins:
 
-```
+```c
 #define MATRIX_ROW_PINS { D0, D5 }
 #define MATRIX_COL_PINS { F1, F0, B0 }
 #define UNUSED_PINS
@@ -89,7 +89,7 @@ The number of `MATRIX_ROW_PINS` entries must be the same as the number you assig
 
 Finally, you can specify the direction your diodes point. This can be `COL2ROW`, `ROW2COL`, or `CUSTOM_MATRIX`.
 
-```
+```c
 #define DIODE_DIRECTION COL2ROW
 ```
 
@@ -97,16 +97,14 @@ Finally, you can specify the direction your diodes point. This can be `COL2ROW`,
 
 By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md).
 
-```
+```c
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_BREATHING
 #define BREATHING_PERIOD 6
 ```
 
-{% hint style='info' %}
-You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
-{% endhint %}
+?> You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
 
 ### Other Configuration Options
 
@@ -120,7 +118,7 @@ You use the `rules.mk` file to tell QMK what files to build and what features to
 
 These options tell the build system what CPU to build for. Be very careful if you change any of these settings, you can render your keyboard inoperable.
 
-```
+```make
 MCU = atmega32u4
 F_CPU = 16000000
 ARCH = AVR8
@@ -128,26 +126,26 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 ```
 
-### Bootloader Size
+### Bootloaders
 
-The bootloader is a special section of your MCU that allows you to upgrade the code stored on the MCU. Think of it like a Rescue Partition for your keyboard. If you are using a teensy 2.0, or a device like the Ergodox EZ that uses the teensy bootloader you should set this to `512`. Most other bootloaders should be set to `4096`, but `1024` and `2048` are other possible values you may encounter.
+The bootloader is a special section of your MCU that allows you to upgrade the code stored on the MCU. Think of it like a Rescue Partition for your keyboard. 
 
-#### Teensy 2.0 Bootloader Example
+#### Teensy Bootloader Example
 
-```
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-```
-
-#### Teensy 2.0++ Bootloader Example
-
-```
-OPT_DEFS += -DBOOTLOADER_SIZE=1024
+```make
+BOOTLOADER = halfkay
 ```
 
 #### Atmel DFU Loader Example
 
+```make
+BOOTLOADER = atmel-dfu
 ```
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+#### Pro Micro Bootloader Example
+
+```make
+BOOTLOADER = caterina
 ```
 
 ### Build Options

docs/internals_gpio_control.md

@@ -0,0 +1,23 @@
+# GPIO Control
+
+QMK has a GPIO control abstraction layer which is micro-controller agnostic. This is done to allow easy access to pin control across different platforms.
+
+## Functions
+
+The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`.
+
+|Function              |Description                                                       |
+|----------------------|------------------------------------------------------------------|
+|`setPinInput(pin)`    |Set pin as input with high impedance (High-Z)                     |
+|`setPinInputHigh(pin)`|Set pin as input with build in pull-up                            |
+|`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)|
+|`setPinOutput(pin)`   |Set pin as output                                                 |
+|`writePinHige(pin)`   |Set pin level as high, assuming it is an output                   |
+|`writePinLow(pin)`    |Set pin level as low, assuming it is an output                    |
+|`writePin(pin, level)`|Set pin level, assuming it is an output                           |
+|`readPin(pin)`        |Returns the level of the pin                                      |
+
+## Advance settings
+
+Each micro-controller can have multiple advance settings regarding its GPIO. This abstraction layer does not limit the use of architecture specific functions. Advance users should consult the datasheet of there desired device and include any needed libraries. For AVR the standard avr/io.h library is used and for STM32 the Chibios [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
+

docs/newbs.md

@@ -6,7 +6,7 @@ Not sure if your keyboard can run QMK? If it's a mechanical keyboard you built y
 
 ## Overview
 
-There are 4 main sections to this guide:
+There are 5 main sections to this guide:
 
 * [Getting Started](newbs_getting_started.md)
 * [Building Your First Firmware](newbs_building_firmware.md)
@@ -15,4 +15,3 @@ There are 4 main sections to this guide:
 * [Learn More with these Resources](newbs_learn_more_resources.md)
 
 This guide is focused on helping someone who has never compiled software before. It makes choices and recommendations based on that viewpoint. There are alternative methods for many of these procedures, and we support most of those alternatives. If you have any doubt about how to accomplish a task you can [ask us for guidance](getting_started_getting_help.md).
-

docs/newbs_learn_more_resources.md

@@ -2,12 +2,12 @@
 These resources are aimed at giving new members in the qmk community more understanding to the information provided in the newbs docs.
 
 Git resources:
-*
-*[Great General Tutorial](https://www.codecademy.com/learn/learn-git)
-*[Git Game To Learn From Examples](https://learngitbranching.js.org/)
-*[Git Resources to Learn More About Github](getting_started_github.md)
-*[Git Resources Aimed Specificly toward QMK](contributing.md)
+
+* [Great General Tutorial](https://www.codecademy.com/learn/learn-git)
+* [Git Game To Learn From Examples](https://learngitbranching.js.org/)
+* [Git Resources to Learn More About Github](getting_started_github.md)
+* [Git Resources Aimed Specificly toward QMK](contributing.md)
 
 
 Command Line resources:
-*[Good General Tutorial on Command Line](https://www.codecademy.com/learn/learn-the-command-line)
+* [Good General Tutorial on Command Line](https://www.codecademy.com/learn/learn-the-command-line)

drivers/avr/i2c_master.c

@@ -8,7 +8,9 @@
 #include "i2c_master.h"
 #include "timer.h"
 
+#ifndef F_SCL
 #define F_SCL 400000UL // SCL frequency
+#endif
 #define Prescaler 1
 #define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
 

drivers/issi/is31fl3218.c

@@ -0,0 +1,102 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "is31fl3218.h"
+#include "i2c_master.h"
+
+// This is the full 8-bit address
+#define ISSI_ADDRESS 0b10101000
+
+// These are the register addresses
+#define ISSI_REG_SHUTDOWN 0x00
+#define ISSI_REG_PWM 0x01
+#define ISSI_REG_CONTROL 0x13
+#define ISSI_REG_UPDATE 0x16
+#define ISSI_REG_RESET 0x17
+
+// Default timeout if no I2C response
+#define ISSI_TIMEOUT 100
+
+// Reusable buffer for transfers
+uint8_t g_twi_transfer_buffer[20];
+
+// IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
+// If used as RGB LED driver, LEDs are assigned RGB,RGB,RGB,RGB,RGB,RGB
+uint8_t g_pwm_buffer[18];
+bool g_pwm_buffer_update_required = false;
+
+void IS31FL3218_write_register( uint8_t reg, uint8_t data )
+{
+	g_twi_transfer_buffer[0] = reg;
+	g_twi_transfer_buffer[1] = data;
+	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+}
+
+void IS31FL3218_write_pwm_buffer( uint8_t *pwm_buffer )
+{
+	g_twi_transfer_buffer[0] = ISSI_REG_PWM;
+	for ( int i=0; i<18; i++ ) {
+		g_twi_transfer_buffer[1+i] = pwm_buffer[i];
+	}
+	
+	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
+}
+
+void IS31FL3218_init(void)
+{
+	// In case we ever want to reinitialize (?)
+	IS31FL3218_write_register( ISSI_REG_RESET, 0x00 );
+	
+	// Turn off software shutdown
+	IS31FL3218_write_register( ISSI_REG_SHUTDOWN, 0x01 );
+
+	// Set all PWM values to zero
+	for ( uint8_t i = 0; i < 18; i++ ) {
+		IS31FL3218_write_register( ISSI_REG_PWM+i, 0x00 );
+	}
+	
+	// Enable all channels
+	for ( uint8_t i = 0; i < 3; i++ ) {
+		IS31FL3218_write_register( ISSI_REG_CONTROL+i, 0b00111111 );
+	}
+	
+	// Load PWM registers and LED Control register data
+	IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
+}
+
+void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+	g_pwm_buffer[index * 3 + 0] = red;
+	g_pwm_buffer[index * 3 + 1] = green;
+	g_pwm_buffer[index * 3 + 2] = blue;
+	g_pwm_buffer_update_required = true;
+}
+
+void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+	for ( int i = 0; i < 6; i++ ) {
+		IS31FL3218_set_color( i, red, green, blue );
+	}
+}
+
+void IS31FL3218_update_pwm_buffers(void)
+{
+	if ( g_pwm_buffer_update_required ) {
+		IS31FL3218_write_pwm_buffer( g_pwm_buffer );
+		// Load PWM registers and LED Control register data
+		IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
+	}
+	g_pwm_buffer_update_required = false;
+}

drivers/issi/is31fl3218.h

@@ -0,0 +1,24 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+void IS31FL3218_init(void);
+void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3218_update_pwm_buffers(void);

drivers/issi/is31fl3731.c

@@ -268,4 +268,3 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
         }
     }
 }
-

drivers/issi/is31fl3733.c

@@ -24,10 +24,10 @@
 #include "wait.h"
 #endif
 
-#include "is31fl3733.h"
 #include <string.h>
 #include "i2c_master.h"
 #include "progmem.h"
+#include "rgb_matrix.h"
 
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
@@ -250,4 +250,3 @@ void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
         }
     }
 }
-

drivers/issi/is31fl3736.c

@@ -0,0 +1,306 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include "is31fl3736.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+
+
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
+#define ISSI_PAGE_PWM 0x01        //PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
+#define ISSI_PAGE_FUNCTION 0x03   //PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 //PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
+#define ISSI_REG_RESET 0x11// PG3
+#define ISSI_REG_SWPULLUP 0x0F //PG3
+#define ISSI_REG_CSPULLUP 0x10 //PG3
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3736 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3736_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
+bool g_led_control_registers_update_required = false;
+
+void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes PG1 is already selected
+
+    // transmit PWM registers in 12 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 192; i += 16 ) {
+        g_twi_transfer_buffer[0] = i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3736_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG0
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    // Turn off all LEDs.
+    for ( int i = 0x00; i <= 0x17; i++ )
+    {
+        IS31FL3736_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG1
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    // Set PWM on all LEDs to 0
+    // No need to setup Breath registers to PWM as that is the default.
+    for ( int i = 0x00; i <= 0xBF; i++ )
+    {
+        IS31FL3736_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG3
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    // Set global current to maximum.
+    IS31FL3736_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    // Disable software shutdown.
+    IS31FL3736_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+
+    // Wait 10ms to ensure the device has woken up.
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+}
+
+void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        g_pwm_buffer[led.driver][led.r] = red;
+        g_pwm_buffer[led.driver][led.g] = green;
+        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31FL3736_set_color( i, red, green, blue );
+    }
+}
+
+void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+    // IS31FL3733
+    // The PWM register for a matrix position (0x00 to 0xBF) can be
+    // divided by 8 to get the LED control register (0x00 to 0x17),
+    // then mod 8 to get the bit position within that register.
+
+    // IS31FL3736
+    // The PWM register for a matrix position (0x00 to 0xBF) is interleaved, so:
+    // A1=0x00 A2=0x02 A3=0x04 A4=0x06 A5=0x08 A6=0x0A A7=0x0C A8=0x0E
+    // B1=0x10 B2=0x12 B3=0x14
+    // But also, the LED control registers (0x00 to 0x17) are also interleaved, so:
+    // A1-A4=0x00 A5-A8=0x01
+    // So, the same math applies.
+
+	uint8_t control_register_r = led.r / 8;
+	uint8_t control_register_g = led.g / 8;
+	uint8_t control_register_b = led.b / 8;
+
+	uint8_t bit_r = led.r % 8;
+	uint8_t bit_g = led.g % 8;
+	uint8_t bit_b = led.b % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3736_mono_set_brightness( int index, uint8_t value )
+{
+    if ( index >= 0 && index < 96 ) {
+    	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+    	// Map index 0..95 to registers 0x00..0xBE (interleaved)
+    	uint8_t pwm_register = index * 2;
+        g_pwm_buffer[0][pwm_register] = value;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3736_mono_set_brightness_all( uint8_t value )
+{
+    for ( int i = 0; i < 96; i++ )
+    {
+    	IS31FL3736_mono_set_brightness( i, value );
+    }
+}
+
+void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled )
+{
+	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+
+	// Map index 0..95 to registers 0x00..0xBE (interleaved)
+	uint8_t pwm_register = index * 2;
+	// Map register 0x00..0xBE (interleaved) into control register and bit
+	uint8_t control_register = pwm_register / 8;
+	uint8_t bit = pwm_register % 8;
+
+    if ( enabled ) {
+        g_led_control_registers[0][control_register] |= (1 << bit);
+    } else {
+        g_led_control_registers[0][control_register] &= ~(1 << bit);
+    }
+
+    g_led_control_registers_update_required = true;
+}
+
+void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG1
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+
+        IS31FL3736_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        //IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG0
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        for ( int i=0; i<24; i++ )
+        {
+            IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i] );
+            //IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}
+

drivers/issi/is31fl3736.h

@@ -0,0 +1,172 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+
+// Simple interface option.
+// If these aren't defined, just define them to make it compile
+
+
+#ifndef DRIVER_COUNT
+#define DRIVER_COUNT 2
+#endif
+
+#ifndef DRIVER_LED_TOTAL
+#define DRIVER_LED_TOTAL 96
+#endif
+
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3736_init( uint8_t addr );
+void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+void IS31FL3736_mono_set_brightness( int index, uint8_t value );
+void IS31FL3736_mono_set_brightness_all( uint8_t value );
+void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define A_1  0x00
+#define A_2  0x02
+#define A_3  0x04
+#define A_4  0x06
+#define A_5  0x08
+#define A_6  0x0A
+#define A_7  0x0C
+#define A_8  0x0E
+
+#define B_1  0x10
+#define B_2  0x12
+#define B_3  0x14
+#define B_4  0x16
+#define B_5  0x18
+#define B_6  0x1A
+#define B_7  0x1C
+#define B_8  0x1E
+
+#define C_1  0x20
+#define C_2  0x22
+#define C_3  0x24
+#define C_4  0x26
+#define C_5  0x28
+#define C_6  0x2A
+#define C_7  0x2C
+#define C_8  0x2E
+
+#define D_1  0x30
+#define D_2  0x32
+#define D_3  0x34
+#define D_4  0x36
+#define D_5  0x38
+#define D_6  0x3A
+#define D_7  0x3C
+#define D_8  0x3E
+
+#define E_1  0x40
+#define E_2  0x42
+#define E_3  0x44
+#define E_4  0x46
+#define E_5  0x48
+#define E_6  0x4A
+#define E_7  0x4C
+#define E_8  0x4E
+
+#define F_1  0x50
+#define F_2  0x52
+#define F_3  0x54
+#define F_4  0x56
+#define F_5  0x58
+#define F_6  0x5A
+#define F_7  0x5C
+#define F_8  0x5E
+
+#define G_1  0x60
+#define G_2  0x62
+#define G_3  0x64
+#define G_4  0x66
+#define G_5  0x68
+#define G_6  0x6A
+#define G_7  0x6C
+#define G_8  0x6E
+
+#define H_1  0x70
+#define H_2  0x72
+#define H_3  0x74
+#define H_4  0x76
+#define H_5  0x78
+#define H_6  0x7A
+#define H_7  0x7C
+#define H_8  0x7E
+
+#define I_1  0x80
+#define I_2  0x82
+#define I_3  0x84
+#define I_4  0x86
+#define I_5  0x88
+#define I_6  0x8A
+#define I_7  0x8C
+#define I_8  0x8E
+
+#define J_1  0x90
+#define J_2  0x92
+#define J_3  0x94
+#define J_4  0x96
+#define J_5  0x98
+#define J_6  0x9A
+#define J_7  0x9C
+#define J_8  0x9E
+
+#define K_1  0xA0
+#define K_2  0xA2
+#define K_3  0xA4
+#define K_4  0xA6
+#define K_5  0xA8
+#define K_6  0xAA
+#define K_7  0xAC
+#define K_8  0xAE
+
+#define L_1  0xB0
+#define L_2  0xB2
+#define L_3  0xB4
+#define L_4  0xB6
+#define L_5  0xB8
+#define L_6  0xBA
+#define L_7  0xBC
+#define L_8  0xBE
+

keyboards/68keys/68keys.c

@@ -0,0 +1,6 @@
+#include "68keys.h"
+
+void matrix_init_kb(void)
+{
+	matrix_init_user();
+}

keyboards/68keys/68keys.h

@@ -0,0 +1,20 @@
+#include "quantum.h"
+
+#define LAYOUT_68_ansi(                                                             \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, K16, \
+    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, K33, K34, \
+    K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48,                \
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63,                \
+    K64, K65, K66, K67, K68, K70, K71, K72, K73, K74)                               \
+    {                                                                               \
+        {K00, K01, K02, K03, K04, K05, K06, K07, K08},                              \
+            {K10, K11, K12, K13, K14, K15, K16, K17, K18},                          \
+            {K20, K21, K22, K23, K24, K25, K26, K27, K28},                          \
+            {K30, K31, K32, K33, K34, K35, K36, K37, K38},                          \
+            {K40, K41, K42, K43, K44, K45, K46, K47, K48},                          \
+            {K50, K51, K52, K53, K54, K55, K56, K57, K58},                          \
+            {K60, K61, K62, K63, K64, K65, K66, K67, K68},                          \
+        {                                                                           \
+            K70, K71, K72, K73, K74                                                 \
+        }                                                                           \
+    }

keyboards/68keys/README.md

@@ -0,0 +1,23 @@
+# 68Keys.io
+
+Custom [68Keys.io](https://68keys.io) DIY keyboard.
+
+Keyboard Maintainer: [sbstjn](https://sbstjn.com)  
+Hardware Supported: Pro Micro  
+Hardware Availability: [DIY Guide](https://68keys.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+```bash
+$ > cd qmk_firmware/
+$ > make 68keys:default
+```
+
+Example of flashing this keyboard:
+
+```bash
+$ > cd qmk_firmware/
+$ > make 68keys:default:avrdude
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/68keys/config.h

@@ -0,0 +1,42 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0A0C
+#define DEVICE_VER 0x0068
+#define MANUFACTURER 68Keys.io
+#define PRODUCT The 68Keys.io Keyboard
+#define DESCRIPTION A 68 keys mechanical keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 9
+
+#define MATRIX_ROW_PINS                \
+    {                                  \
+        B6, B2, B3, B1, F7, F6, F5, F4 \
+    }
+#define MATRIX_COL_PINS                    \
+    {                                      \
+        D3, D2, D1, D0, D4, C6, D7, E6, B4 \
+    }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/68keys/info.json

@@ -0,0 +1,81 @@
+{
+  "keyboard_name": "68Keys.io",
+  "url": "https://68keys.io",
+  "maintainer": "qmk",
+  "width": 17.25,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_68_ansi": {
+      "layout": [
+        { "label": "~", "x": 0, "y": 0 },
+        { "label": "!", "x": 1, "y": 0 },
+        { "label": "@", "x": 2, "y": 0 },
+        { "label": "#", "x": 3, "y": 0 },
+        { "label": "$", "x": 4, "y": 0 },
+        { "label": "%", "x": 5, "y": 0 },
+        { "label": "^", "x": 6, "y": 0 },
+        { "label": "&", "x": 7, "y": 0 },
+        { "label": "*", "x": 8, "y": 0 },
+        { "label": "(", "x": 9, "y": 0 },
+        { "label": ")", "x": 10, "y": 0 },
+        { "label": "_", "x": 11, "y": 0 },
+        { "label": "+", "x": 12, "y": 0 },
+        { "label": "Backspace", "x": 13, "y": 0, "w": 2 },
+        { "label": "ESC", "x": 15.25, "y": 0 },
+        { "label": "PGUP", "x": 16.25, "y": 0 },
+        { "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
+        { "label": "Q", "x": 1.5, "y": 1 },
+        { "label": "W", "x": 2.5, "y": 1 },
+        { "label": "E", "x": 3.5, "y": 1 },
+        { "label": "R", "x": 4.5, "y": 1 },
+        { "label": "T", "x": 5.5, "y": 1 },
+        { "label": "Y", "x": 6.5, "y": 1 },
+        { "label": "U", "x": 7.5, "y": 1 },
+        { "label": "I", "x": 8.5, "y": 1 },
+        { "label": "O", "x": 9.5, "y": 1 },
+        { "label": "P", "x": 10.5, "y": 1 },
+        { "label": "{", "x": 11.5, "y": 1 },
+        { "label": "}", "x": 12.5, "y": 1 },
+        { "label": "|", "x": 13.5, "y": 1, "w": 1.5 },
+        { "label": "DEL", "x": 15.25, "y": 1 },
+        { "label": "PGDN", "x": 16.25, "y": 1 },
+        { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 },
+        { "label": "A", "x": 1.75, "y": 2 },
+        { "label": "S", "x": 2.75, "y": 2 },
+        { "label": "D", "x": 3.75, "y": 2 },
+        { "label": "F", "x": 4.75, "y": 2 },
+        { "label": "G", "x": 5.75, "y": 2 },
+        { "label": "H", "x": 6.75, "y": 2 },
+        { "label": "J", "x": 7.75, "y": 2 },
+        { "label": "K", "x": 8.75, "y": 2 },
+        { "label": "L", "x": 9.75, "y": 2 },
+        { "label": ":", "x": 10.75, "y": 2 },
+        { "label": "\"", "x": 11.75, "y": 2 },
+        { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 },
+        { "label": "Shift", "x": 0, "y": 3, "w": 2.25 },
+        { "label": "Z", "x": 2.25, "y": 3 },
+        { "label": "X", "x": 3.25, "y": 3 },
+        { "label": "C", "x": 4.25, "y": 3 },
+        { "label": "V", "x": 5.25, "y": 3 },
+        { "label": "B", "x": 6.25, "y": 3 },
+        { "label": "N", "x": 7.25, "y": 3 },
+        { "label": "M", "x": 8.25, "y": 3 },
+        { "label": "<", "x": 9.25, "y": 3 },
+        { "label": ">", "x": 10.25, "y": 3 },
+        { "label": "?", "x": 11.25, "y": 3 },
+        { "label": "Shift", "x": 12.25, "y": 3, "w": 2.75 },
+        { "x": 15.25, "y": 3 },
+        { "label": "CTRL", "x": 0, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 1.25, "y": 4, "w": 1.25 },
+        { "label": "GUI", "x": 2.5, "y": 4, "w": 1.25 },
+        { "x": 3.75, "y": 4, "w": 6.25 },
+        { "label": "GUI", "x": 10, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 11.25, "y": 4, "w": 1.25 },
+        { "label": "CTRL", "x": 12.5, "y": 4, "w": 1.25 },
+        { "x": 14.25, "y": 4 },
+        { "x": 15.25, "y": 4 },
+        { "x": 16.25, "y": 4 }
+      ]
+    }
+  }
+}

keyboards/68keys/keymaps/default/keymap.c

@@ -0,0 +1,10 @@
+#include QMK_KEYBOARD_H
+#include "68keys.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_68_ansi(
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, KC_PGUP,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN,
+        KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+        KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)};

keyboards/68keys/rules.mk

@@ -0,0 +1,22 @@
+LAYOUTS = 68_ansi
+
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+BOOTLOADER = atmel-dfu
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration (+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys (+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control (+450)
+CONSOLE_ENABLE = no         # Console for debug (+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+

keyboards/baguette/baguette.c

@@ -0,0 +1,71 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "baguette.h"
+
+void bootmagic_lite(void)
+{
+	// The lite version of TMK's bootmagic made by Wilba.
+	// 100% less potential for accidentally making the
+	// keyboard do stupid things.
+
+	// We need multiple scans because debouncing can't be turned off.
+	matrix_scan();
+	wait_ms(DEBOUNCING_DELAY);
+	matrix_scan();
+
+	// If the Esc and space bar are held down on power up,
+	// reset the EEPROM valid state and jump to bootloader.
+	// Assumes Esc is at [0,0] and spacebar is at [4,7].
+	// This isn't very generalized, but we need something that doesn't
+	// rely on user's keymaps in firmware or EEPROM.
+	if ( ( matrix_get_row(0) & (1<<0) ) &&
+		( matrix_get_row(4) & (1<<7) ) )
+	{
+		// Set the TMK/QMK EEPROM state as invalid.
+		eeconfig_disable();
+		//eeprom_set_valid(false);
+		// Jump to bootloader.
+		bootloader_jump();
+	}
+}
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	bootmagic_lite();
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/baguette/baguette.h

@@ -0,0 +1,59 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef BAGUETTE_H
+#define BAGUETTE_H
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ansi( \
+        K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F, \
+        K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,          K1F, \
+        K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,          K2D,               \
+        K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,        \
+                      K42,   K43,                        K47,                        K4B,   K4C,   K4D,   K4E,   K4F  \
+) \
+{ \
+    {   K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F }, \
+    {   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D, KC_NO,   K1F }, \
+    {   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B, KC_NO,   K2D, KC_NO, KC_NO }, \
+    {   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E, KC_NO }, \
+    { KC_NO, KC_NO,   K42,   K43, KC_NO, KC_NO, KC_NO,   K47, KC_NO, KC_NO, KC_NO,   K4B,   K4C,   K4D,   K4E,   K4F }  \
+}
+
+#define LAYOUT_iso( \
+        K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F, \
+        K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,                 K1F, \
+        K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K1D,   K2D,               \
+        K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,        \
+                      K42,   K43,                        K47,                        K4B,   K4C,   K4D,   K4E,   K4F  \
+) \
+{ \
+    {   K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F }, \
+    {   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C, KC_NO, KC_NO,   K1F }, \
+    {   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K1D,   K2D, KC_NO, KC_NO }, \
+    {   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E, KC_NO }, \
+    { KC_NO, KC_NO,   K42,   K43, KC_NO, KC_NO, KC_NO,   K47, KC_NO, KC_NO, KC_NO,   K4B,   K4C,   K4D,   K4E,   K4F }  \
+}
+
+#endif

keyboards/baguette/config.h

@@ -0,0 +1,224 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x5050
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Yiancar
+#define PRODUCT         Baguette
+#define DESCRIPTION     A French Custom
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B2, B1, E6, D6 }
+#define MATRIX_COL_PINS { B6, C6, C7, F7, F6, F5, F4, F1, F0, B0, D0, D1, D2, D3, D5, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/baguette/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "Baguette", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "bootloader": "atmel-dfu", 
+    "width": 19.75, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_ansi": {
+            "layout": [{"label":"~", "x":3.25, "y":1.5}, {"label":"!", "x":4.25, "y":1.5}, {"label":"@", "x":5.25, "y":1.5}, {"label":"#", "x":6.25, "y":1.5}, {"label":"$", "x":7.25, "y":1.5}, {"label":"%", "x":8.25, "y":1.5}, {"label":"^", "x":9.25, "y":1.5}, {"label":"&", "x":10.25, "y":1.5}, {"label":"*", "x":11.25, "y":1.5}, {"label":"(", "x":12.25, "y":1.5}, {"label":")", "x":13.25, "y":1.5}, {"label":"_", "x":14.25, "y":1.5}, {"label":"+", "x":15.25, "y":1.5}, {"label":"|", "x":16.25, "y":1.5}, {"label":"Del", "x":17.25, "y":1.5}, {"label":"Insert", "x":18.75, "y":1.5}, {"label":"Tab", "x":3.25, "y":2.5, "w":1.5}, {"label":"Q", "x":4.75, "y":2.5}, {"label":"W", "x":5.75, "y":2.5}, {"label":"E", "x":6.75, "y":2.5}, {"label":"R", "x":7.75, "y":2.5}, {"label":"T", "x":8.75, "y":2.5}, {"label":"Y", "x":9.75, "y":2.5}, {"label":"U", "x":10.75, "y":2.5}, {"label":"I", "x":11.75, "y":2.5}, {"label":"O", "x":12.75, "y":2.5}, {"label":"P", "x":13.75, "y":2.5}, {"label":"{", "x":14.75, "y":2.5}, {"label":"}", "x":15.75, "y":2.5}, {"label":"|", "x":16.75, "y":2.5, "w":1.5}, {"label":"Delete", "x":18.75, "y":2.5}, {"label":"Control", "x":3.25, "y":3.5, "w":1.75}, {"label":"A", "x":5, "y":3.5}, {"label":"S", "x":6, "y":3.5}, {"label":"D", "x":7, "y":3.5}, {"label":"F", "x":8, "y":3.5}, {"label":"G", "x":9, "y":3.5}, {"label":"H", "x":10, "y":3.5}, {"label":"J", "x":11, "y":3.5}, {"label":"K", "x":12, "y":3.5}, {"label":"L", "x":13, "y":3.5}, {"label":":", "x":14, "y":3.5}, {"label":"\"", "x":15, "y":3.5}, {"label":"Enter", "x":16, "y":3.5, "w":2.25}, {"x":3.25, "y":4.5, "w":1.25}, {"x":4.5, "y":4.5}, {"label":"Z", "x":5.5, "y":4.5}, {"label":"X", "x":6.5, "y":4.5}, {"label":"C", "x":7.5, "y":4.5}, {"label":"V", "x":8.5, "y":4.5}, {"label":"B", "x":9.5, "y":4.5}, {"label":"N", "x":10.5, "y":4.5}, {"label":"M", "x":11.5, "y":4.5}, {"label":"<", "x":12.5, "y":4.5}, {"label":">", "x":13.5, "y":4.5}, {"label":"?", "x":14.5, "y":4.5}, {"x":15.5, "y":4.5}, {"label":"Shift", "x":16.5, "y":4.5, "w":1.25}, {"label":"\u2191", "x":17.75, "y":4.5}, {"label":"Win", "x":4.5, "y":5.5}, {"label":"Alt", "x":5.5, "y":5.5, "w":1.25}, {"x":6.75, "y":5.5, "w":6.25}, {"label":"Ctrl", "x":13, "y":5.5, "w":1.25}, {"label":"Fn", "x":14.25, "y":5.5}, {"label":"\u2190", "x":16.75, "y":5.5}, {"label":"\u2193", "x":17.75, "y":5.5}, {"label":"\u2192", "x":18.75, "y":5.5}]
+        },
+        "LAYOUT_iso": {
+            "layout": [{"label":"~", "x":3.25, "y":1.5}, {"label":"!", "x":4.25, "y":1.5}, {"label":"@", "x":5.25, "y":1.5}, {"label":"#", "x":6.25, "y":1.5}, {"label":"$", "x":7.25, "y":1.5}, {"label":"%", "x":8.25, "y":1.5}, {"label":"^", "x":9.25, "y":1.5}, {"label":"&", "x":10.25, "y":1.5}, {"label":"*", "x":11.25, "y":1.5}, {"label":"(", "x":12.25, "y":1.5}, {"label":")", "x":13.25, "y":1.5}, {"label":"_", "x":14.25, "y":1.5}, {"label":"+", "x":15.25, "y":1.5}, {"label":"|", "x":16.25, "y":1.5}, {"label":"Del", "x":17.25, "y":1.5}, {"label":"Insert", "x":18.75, "y":1.5}, {"label":"Tab", "x":3.25, "y":2.5, "w":1.5}, {"label":"Q", "x":4.75, "y":2.5}, {"label":"W", "x":5.75, "y":2.5}, {"label":"E", "x":6.75, "y":2.5}, {"label":"R", "x":7.75, "y":2.5}, {"label":"T", "x":8.75, "y":2.5}, {"label":"Y", "x":9.75, "y":2.5}, {"label":"U", "x":10.75, "y":2.5}, {"label":"I", "x":11.75, "y":2.5}, {"label":"O", "x":12.75, "y":2.5}, {"label":"P", "x":13.75, "y":2.5}, {"label":"{", "x":14.75, "y":2.5}, {"label":"}", "x":15.75, "y":2.5}, {"label":"Enter", "x":17, "y":2.5, "w":1.25, "h":2}, {"label":"Delete", "x":18.75, "y":2.5}, {"label":"Control", "x":3.25, "y":3.5, "w":1.75}, {"label":"A", "x":5, "y":3.5}, {"label":"S", "x":6, "y":3.5}, {"label":"D", "x":7, "y":3.5}, {"label":"F", "x":8, "y":3.5}, {"label":"G", "x":9, "y":3.5}, {"label":"H", "x":10, "y":3.5}, {"label":"J", "x":11, "y":3.5}, {"label":"K", "x":12, "y":3.5}, {"label":"L", "x":13, "y":3.5}, {"label":":", "x":14, "y":3.5}, {"label":"\"", "x":15, "y":3.5}, {"x":16, "y":3.5}, {"x":3.25, "y":4.5, "w":1.25}, {"x":4.5, "y":4.5}, {"label":"Z", "x":5.5, "y":4.5}, {"label":"X", "x":6.5, "y":4.5}, {"label":"C", "x":7.5, "y":4.5}, {"label":"V", "x":8.5, "y":4.5}, {"label":"B", "x":9.5, "y":4.5}, {"label":"N", "x":10.5, "y":4.5}, {"label":"M", "x":11.5, "y":4.5}, {"label":"<", "x":12.5, "y":4.5}, {"label":">", "x":13.5, "y":4.5}, {"label":"?", "x":14.5, "y":4.5}, {"x":15.5, "y":4.5}, {"label":"Shift", "x":16.5, "y":4.5, "w":1.25}, {"label":"\u2191", "x":17.75, "y":4.5}, {"label":"Win", "x":4.5, "y":5.5}, {"label":"Alt", "x":5.5, "y":5.5, "w":1.25}, {"x":6.75, "y":5.5, "w":6.25}, {"label":"Ctrl", "x":13, "y":5.5, "w":1.25}, {"label":"Fn", "x":14.25, "y":5.5}, {"label":"\u2190", "x":16.75, "y":5.5}, {"label":"\u2193", "x":17.75, "y":5.5}, {"label":"\u2192", "x":18.75, "y":5.5}]
+        }
+    }
+}

keyboards/baguette/keymaps/default/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ansi( /* Base */
+    KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,  KC_BSPC,  KC_TRNS,  KC_INS,\
+    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC, KC_BSLS,            KC_DEL,\
+    KC_CAPS,  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,           KC_ENT,                    \
+    KC_LSFT,  KC_TRNS,  KC_Z,     KC_X,  KC_C,  KC_V,  KC_B,    KC_N,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_TRNS, KC_RSFT,  KC_UP,           \
+                     KC_LGUI,  KC_LALT,                       KC_SPC,                             KC_RCTL,  MO(1),   KC_LEFT, KC_DOWN,  KC_RGHT),
+
+[1] = LAYOUT_ansi( /* FN */
+    KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,  KC_TRNS,  KC_TRNS,  KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET,   KC_TRNS,            KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,           KC_TRNS,                    \
+    KC_TRNS,  KC_TRNS,  BL_TOGG,  BL_STEP,  BL_BRTG,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          \
+                        KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_RCTL,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS),
+};
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/baguette/keymaps/default/readme.md

@@ -0,0 +1,9 @@
+# The default ANSI keymap for baguette
+
+Typical ANSI keymap. Please note:
+- Left key from split backspace is connected to 2u key.
+- Left key from split left Shift is connected to 2u key.
+- Right key from split right Shift is connected to 2u key.
+- Backlight control is on the Z, X and C keys of the FN layer.
+- Reset key combination is FN + ].
+- Holding ESC and Space while plugging in the USB erases the EEPROM.

keyboards/baguette/keymaps/iso/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_iso( /* Base */
+    KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,  KC_BSPC,  KC_TRNS,  KC_INS,\
+    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,                     KC_DEL,\
+    KC_CAPS,  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_QUOT, KC_ENT,                    \
+    KC_LSFT,  KC_TRNS,  KC_Z,     KC_X,  KC_C,  KC_V,  KC_B,    KC_N,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_TRNS, KC_RSFT,  KC_UP,           \
+              KC_LGUI,  KC_LALT,                       KC_SPC,                          KC_RCTL,  MO(1),    KC_LEFT, KC_DOWN,  KC_RGHT),
+
+[0] = LAYOUT_iso( /* FN */
+    KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,  KC_TRNS,  KC_TRNS,  KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET,   KC_TRNS,            KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,           KC_TRNS,                    \
+    KC_TRNS,  KC_TRNS,  BL_TOGG,  BL_STEP,  BL_BRTG,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          \
+              KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_RCTL,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS),
+};
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/baguette/keymaps/iso/readme.md

@@ -0,0 +1,10 @@
+# The default ISO keymap for baguette
+
+Typical ISO keymap. Please note:
+- Left key from split backspace is connected to 2u key.
+- Left key from split left Shift is connected to 2u key.
+- Right key from split right Shift is connected to 2u key.
+- Backlight control is on the Z, X and C keys of the FN layer.
+- Reset key combination is FN + ].
+- Holding ESC and Space while plugging in the USB erases the EEPROM.
+

keyboards/baguette/readme.md

@@ -0,0 +1,16 @@
+Baguette
+========
+
+![Baguette](https://cdn.discordapp.com/attachments/426880953143525384/479788409263489035/scecre2.png)
+
+This is a custom keyboard with backlight inspired by France.
+
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Hardware Supported: ATMEGA 32u4 MCU with backlight support.
+Hardware Availability: Closed group-buy please contact the runners (Tesletron and Enjoy)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make baguette:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/baguette/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/bmini/bmini.h

@@ -38,6 +38,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
 }
 
+#define LAYOUT_splitbs( \
+  K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD4, KD0, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2,           KE0, \
+  K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,           K86, K77, \
+  K00, K10, K20,           K56,                     K57, KB0, KC0, K66, K76, K96  \
+){ \
+  { K00, K10,   K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0,   KD0,   KE0   }, \
+  { K01, K11,   K21, K31,   K41,   K51,   KC_NO, KC_NO, KC_NO, KC_NO, KA1,   KB1, KC_NO, KD1,   KE1   }, \
+  { K02, K12,   K22, K32,   K42,   K52,   KC_NO, KC_NO, KC_NO, KC_NO, KA2,   KB2, KC_NO, KD2,   KE2   }, \
+  { K03, K13,   K23, K33,   K43,   K53,   KC_NO, KC_NO, KC_NO, KC_NO, KA3,   KB3, KC3,   KD3,   KC_NO }, \
+  { K04, K14,   K24, K34,   K44,   K54,   KC_NO, KC_NO, KC_NO, KC_NO, KA4,   KB4, KC4,   KD4,   KE4   }, \
+  { K05, KC_NO, K25, K35,   K45,   K55,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5,   KD5,   KE5   }, \
+  { K06, K16,   K26, K36,   K46,   K56,   K66,   K76,   K86,   K96,   KA6,   KB6, KC6,   KD6,   KE6   }, \
+  { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
+}
+
 #define LAYOUT_kc( \
     K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
     K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, \

keyboards/bmini/info.json

@@ -8,6 +8,10 @@
     "LAYOUT": {
       "key_count": 84,
       "layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1, "w":2}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K10", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":6.25}, {"label":"K57", "x":10, "y":5}, {"label":"KB0", "x":11, "y":5}, {"label":"KC0", "x":12, "y":5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
+    },
+    "LAYOUT_splitbs": {
+      "key_count": 85,
+      "layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1}, {"label":"KD4", "x":14, "y":1}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K10", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":6.25}, {"label":"K57", "x":10, "y":5}, {"label":"KB0", "x":11, "y":5}, {"label":"KC0", "x":12, "y":5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
     }
   }
 }

keyboards/contra/keymaps/maxr1998/keymap.c

@@ -20,13 +20,17 @@
 enum contra_layers {
   _QWERTZ,
   _FUNC,
-  _NUMROW
+  _NUMROW,
+  _NUMROW_L3,
+  _GAMING
 };
 
 #define KC_I3 LM(_NUMROW, MOD_LALT)
 #define KC_NR MO(_NUMROW)
 #define NR_L3 SAFE_RANGE
 #define FUN MO(_FUNC)
+#define G_1 TO(_GAMING)
+#define G_0 TG(_GAMING)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
@@ -52,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |      |      |      |      |      |      |      |   Ü  |      |   Ö  |      | Del  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Lock |   Ä  |   ß  |      |      |      |      | RGBS | RGBB | RGBS |      |      |
+ * | Lock |   Ä  |   ß  |      |      | GAME |      | RGBS | RGBB | RGBS |      |      |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |      |      |      |      |      |      | RGBH-| RGBT | RGBH+| PgUp |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -61,14 +65,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_FUNC] = {
   {_______, _______, _______, _______, _______, _______, _______, DE_UE,   _______, DE_OE,   _______, KC_DEL },
-  {KC_LOCK, DE_AE,   DE_SS,   _______, _______, _______, _______, RGB_M_P, RGB_M_B, RGB_M_SW,_______, _______},
+  {KC_LOCK, DE_AE,   DE_SS,   _______, _______, G_1,     _______, RGB_M_P, RGB_M_B, RGB_M_SW,_______, _______},
   {_______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_TOG, RGB_HUI, KC_PGUP, _______},
   {_______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDN, KC_END }
 },
 
 /* Numrow layer (special characters with Shift and ISO_L3_Shift)
  * ,-----------------------------------------------------------------------------------.
- * |      |  1   |  2   |  3   |  4   |  5   |  6   |  7   |  8   |  9   |  0   |  ß   |
+ * |      |  1   |  2   |  3   |  4   |  5   |  6   |  7   |  8   |  9   |  0   |      |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |  #'  |      |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
@@ -78,25 +82,61 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_NUMROW] = {
-  {_______, DE_1,    DE_2,    DE_3,    DE_4,    DE_5,    DE_6,    DE_7,    DE_8,    DE_9,    DE_0,    DE_SS  },
+  {_______, DE_1,    DE_2,    DE_3,    DE_4,    DE_5,    DE_6,    DE_7,    DE_8,    DE_9,    DE_0,    _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, DE_HASH, _______},
   {_______, DE_LESS, _______, _______, _______, _______, _______, _______, _______, _______, DE_MINS, _______},
   {_______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, _______, _______, _______}
+},
+[_NUMROW_L3] = {
+  {_______, DE_1,    DE_2,    DE_3,    DE_4,    DE_5,    DE_6,    DE_7,    DE_8,    DE_9,    DE_0,    _______},
+  {_______, DE_Q,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, DE_LESS, _______, _______, _______, _______, _______, _______, _______, _______, DE_MINS, _______},
+  {_______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, _______, _______, _______}
+},
+
+/* Gaming
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Space|      |      |      |      |      |      |      | Reset|      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_GAMING] = {
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {KC_SPC,  _______, _______, _______, _______, _______, _______, _______, G_0,     _______, _______, _______}
 }
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (keycode == NR_L3) {
-    if (record->event.pressed) {
-      register_code(DE_ALGR);
-      layer_on(_NUMROW);
-    } else {
-      layer_off(_NUMROW);
-      unregister_code(DE_ALGR);
-    }
-    return false;
+  switch(keycode) {
+    case KC_BSPC:
+      if (record->event.pressed) {
+        if (get_mods() & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT))) {
+          register_code(DE_SS);
+          return false;
+        }
+      } else {
+        unregister_code(DE_SS);
+      }
+      return true;
+    case NR_L3:
+      if (record->event.pressed) {
+        register_code(DE_ALGR);
+        layer_on(_NUMROW_L3);
+      } else {
+        layer_off(_NUMROW_L3);
+        unregister_code(DE_ALGR);
+      }
+      return false;
+    default:
+      return true;
   }
-  return true;
 }
 
 void led_set_user(uint8_t usb_led) {

keyboards/converter/hp_46010a/hp_46010a.h

@@ -35,7 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * `-----------------------------------------------------------------------------------'    `-------------------'
  */
 
-#define LAYOUT_HP_46010A( \
+#define LAYOUT( \
     KEY_RES, KEY_STOP, KEY_F1, KEY_F2, KEY_F3, KEY_F4,KEY_MENU,KEY_USER, KEY_F5, KEY_F6, KEY_F7, KEY_F8,                     KEY_CLRL, KEY_CLRD,   KEY_B1,   KEY_B2,  KEY_B3,  KEY_B4,   \
     KEY_GRAV,      KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_0, KEY_MINU, KEY_PLUS, KEY_BACK,       KEY_INSL, KEY_DELL,   KEY_MULT, KEY_DIV, KEY_ADD, KEY_SUBT, \
     KEY_TAB,          KEY_Q,KEY_W, KEY_E, KEY_R, KEY_T, KEY_Y, KEY_U, KEY_I, KEY_O, KEY_P, KEY_LBRA, KEY_RBRA, KEY_PIPE,     KEY_INSC, KEY_DELC,   KEY_P7,   KEY_P8,  KEY_P9,  KEY_PADE, \
@@ -58,5 +58,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     {KEY_B1,    KEY_P0,   KEY_B2,   KC_NO,    KEY_B3,   KEY_PDOT, KEY_B4,   KC_NO    }, \
     {KEY_B,     KEY_V,    KEY_C,    KEY_X,    KEY_Z,    KEY_PRNT, KEY_DELE, KEY_N    }, \
 }
-
-#define LAYOUT LAYOUT_HP_46010A

keyboards/converter/hp_46010a/info.json

@@ -3,4 +3,119 @@
   "keyboard_folder": "converter/HP_46010A",
   "url": "https://deskthority.net/wiki/HP_46010A",
   "maintainer": "listofoptions",
+  "width": 22,
+  "height": 7,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"label":"Reset", "x":0, "y":0},
+        {"label":"Stop", "x":1, "y":0},
+        {"label":"F1", "x":2.5, "y":0, "w":1.25},
+        {"label":"F2", "x":3.75, "y":0, "w":1.25},
+        {"label":"F3", "x":5, "y":0, "w":1.25},
+        {"label":"F4", "x":6.25, "y":0, "w":1.25},
+        {"label":"Menu", "x":7.5, "y":0},
+        {"label":"User", "x":8.5, "y":0},
+        {"label":"F5", "x":9.5, "y":0, "w":1.25},
+        {"label":"F6", "x":10.75, "y":0, "w":1.25},
+        {"label":"F7", "x":12, "y":0, "w":1.25},
+        {"label":"F8", "x":13.25, "y":0, "w":1.25},
+        {"label":"Clear line", "x":15, "y":0},
+        {"label":"Clear display", "x":16, "y":0},
+        {"x":18, "y":0},
+        {"x":19, "y":0},
+        {"x":20, "y":0},
+        {"x":21, "y":0},
+        {"label":"`", "x":0, "y":2, "w":1.25},
+        {"label":"1", "x":1.25, "y":2},
+        {"label":"2", "x":2.25, "y":2},
+        {"label":"3", "x":3.25, "y":2},
+        {"label":"4", "x":4.25, "y":2},
+        {"label":"5", "x":5.25, "y":2},
+        {"label":"6", "x":6.25, "y":2},
+        {"label":"7", "x":7.25, "y":2},
+        {"label":"8", "x":8.25, "y":2},
+        {"label":"9", "x":9.25, "y":2},
+        {"label":"0", "x":10.25, "y":2},
+        {"label":"-", "x":11.25, "y":2},
+        {"label":"=", "x":12.25, "y":2},
+        {"label":"Backspace", "x":13.25, "y":2, "w":1.5},
+        {"label":"Insert line", "x":15, "y":2},
+        {"label":"Delete line", "x":16, "y":2},
+        {"label":"*", "x":18, "y":2},
+        {"label":"/", "x":19, "y":2},
+        {"label":"+", "x":20, "y":2},
+        {"label":"-", "x":21, "y":2},
+        {"label":"Tab", "x":0, "y":3, "w":1.75},
+        {"label":"Q", "x":1.75, "y":3},
+        {"label":"W", "x":2.75, "y":3},
+        {"label":"E", "x":3.75, "y":3},
+        {"label":"R", "x":4.75, "y":3},
+        {"label":"T", "x":5.75, "y":3},
+        {"label":"Y", "x":6.75, "y":3},
+        {"label":"U", "x":7.75, "y":3},
+        {"label":"I", "x":8.75, "y":3},
+        {"label":"O", "x":9.75, "y":3},
+        {"label":"P", "x":10.75, "y":3},
+        {"label":"[", "x":11.75, "y":3},
+        {"label":"]", "x":12.75, "y":3},
+        {"label":"\\", "x":13.75, "y":3},
+        {"label":"Insert char", "x":15, "y":3},
+        {"label":"Delete char", "x":16, "y":3},
+        {"label":"7", "x":18, "y":3},
+        {"label":"8", "x":19, "y":3},
+        {"label":"9", "x":20, "y":3},
+        {"label":"Enter", "x":21, "y":3},
+        {"label":"Caps Lock", "x":0, "y":4},
+        {"label":"Ctrl", "x":1, "y":4},
+        {"label":"A", "x":2, "y":4},
+        {"label":"S", "x":3, "y":4},
+        {"label":"D", "x":4, "y":4},
+        {"label":"F", "x":5, "y":4},
+        {"label":"G", "x":6, "y":4},
+        {"label":"H", "x":7, "y":4},
+        {"label":"J", "x":8, "y":4},
+        {"label":"K", "x":9, "y":4},
+        {"label":"L", "x":10, "y":4},
+        {"label":";", "x":11, "y":4},
+        {"label":"'", "x":12, "y":4},
+        {"label":"Return", "x":13, "y":4, "w":1.75},
+        {"label":"Cursor", "x":15, "y":4},
+        {"label":"Prev", "x":16, "y":4},
+        {"label":"4", "x":18, "y":4},
+        {"label":"5", "x":19, "y":4},
+        {"label":"6", "x":20, "y":4},
+        {"label":",", "x":21, "y":4},
+        {"label":"Del", "x":0, "y":5},
+        {"label":"Shift", "x":1.25, "y":5, "w":1.25},
+        {"label":"Z", "x":2.5, "y":5},
+        {"label":"X", "x":3.5, "y":5},
+        {"label":"C", "x":4.5, "y":5},
+        {"label":"V", "x":5.5, "y":5},
+        {"label":"B", "x":6.5, "y":5},
+        {"label":"N", "x":7.5, "y":5},
+        {"label":"M", "x":8.5, "y":5},
+        {"label":",", "x":9.5, "y":5},
+        {"label":".", "x":10.5, "y":5},
+        {"label":"/", "x":11.5, "y":5},
+        {"label":"Shift", "x":12.5, "y":5, "w":1.25},
+        {"label":"Select", "x":14, "y":5},
+        {"label":"Up", "x":15, "y":5},
+        {"label":"Next", "x":16, "y":5},
+        {"label":"1", "x":18, "y":5},
+        {"label":"2", "x":19, "y":5},
+        {"label":"3", "x":20, "y":5},
+        {"label":"Tab", "x":21, "y":5, "h":2},
+        {"label":"Win", "x":0, "y":6},
+        {"label":"Extend Char", "x":2.5, "y":6},
+        {"x":3.5, "y":6, "w":8},
+        {"label":"Extend Char", "x":11.5, "y":6},
+        {"label":"Left", "x":14, "y":6},
+        {"label":"Down", "x":15, "y":6},
+        {"label":"Right", "x":16, "y":6},
+        {"label":"0", "x":18, "y":6, "w":2},
+        {"label":".", "x":20, "y":6}
+      ]
+    }
+  }
 }

keyboards/converter/sun_usb/command_extra.c

@@ -0,0 +1,64 @@
+#include QMK_KEYBOARD_H
+#include "protocol/serial.h"
+
+bool sun_bell = false;
+bool sun_click = false;
+
+
+bool command_extra(uint8_t code)
+{
+    switch (code) {
+        case KC_H:
+        case KC_SLASH: /* ? */
+            print("\n\n----- Sun converter Help -----\n");
+            print("Home:        Toggle Bell\n");
+            print("End:         Toggle Click\n");
+            print("PgUp:        LED all On\n");
+            print("PgDown:      LED all Off\n");
+            print("Insert:      Layout\n");
+            print("Delete:      Reset\n");
+            return false;
+        case KC_DEL:
+            print("Reset\n");
+            serial_send(0x01);
+            break;
+        case KC_HOME:
+	    sun_bell = !sun_bell;
+	    if (sun_bell) {
+                print("Bell On\n");
+	        serial_send(0x02);
+	    } else {
+	        print("Bell Off\n");
+	        serial_send(0x03);
+	    }
+            break;
+        case KC_END:
+	    sun_click = !sun_click;
+	    if (sun_click) {
+	        print("Click On\n");
+		serial_send(0x0A);
+	    } else {
+	        print("Click Off\n");
+                serial_send(0x0B);
+	    }
+	    break;
+        case KC_PGUP:
+            print("LED all on\n");
+            serial_send(0x0E);
+            serial_send(0xFF);
+            break;
+        case KC_PGDOWN:
+            print("LED all off\n");
+            serial_send(0x0E);
+            serial_send(0x00);
+            break;
+        case KC_INSERT:
+            print("layout\n");
+            serial_send(0x0F);
+            break;
+        default:
+            xprintf("Unknown extra command: %02X\n", code);
+            return false;
+    }
+    return true;
+}

keyboards/converter/sun_usb/config.h

@@ -0,0 +1,88 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define CUSTOM_MATRIX 2
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3333
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    QMK
+#define PRODUCT         Sun keyboard converter
+#define DESCRIPTION     USB converter for Sun type 5 keyboard
+
+/* matrix size */
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 8
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+/* Serial(USART) configuration
+ *     asynchronous, negative logic, 1200baud, no flow control
+ *     1-start bit, 8-data bit, non parity, 1-stop bit
+ */
+#define SERIAL_SOFT_BAUD            1200
+#define SERIAL_SOFT_PARITY_NONE
+#define SERIAL_SOFT_BIT_ORDER_LSB
+#define SERIAL_SOFT_LOGIC_NEGATIVE
+/* RXD Port */
+#define SERIAL_SOFT_RXD_ENABLE
+#define SERIAL_SOFT_RXD_DDR         DDRD
+#define SERIAL_SOFT_RXD_PORT        PORTD
+#define SERIAL_SOFT_RXD_PIN         PIND
+#define SERIAL_SOFT_RXD_BIT         2
+#define SERIAL_SOFT_RXD_VECT        INT2_vect
+/* RXD Interupt */
+#define SERIAL_SOFT_RXD_INIT()      do { \
+    /* pin configuration: input with pull-up */ \
+    SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
+    SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
+    /* enable interrupt: INT2(rising edge) */ \
+    EICRA |= ((1<<ISC21)|(1<<ISC20)); \
+    EIMSK |= (1<<INT2); \
+    sei(); \
+} while (0)
+#define SERIAL_SOFT_RXD_INT_ENTER()
+#define SERIAL_SOFT_RXD_INT_EXIT()  do { \
+    /* clear interrupt  flag */ \
+    EIFR = (1<<INTF2); \
+} while (0)
+#define SERIAL_SOFT_RXD_READ()      (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
+/* TXD Port */
+#define SERIAL_SOFT_TXD_ENABLE
+#define SERIAL_SOFT_TXD_DDR         DDRD
+#define SERIAL_SOFT_TXD_PORT        PORTD
+#define SERIAL_SOFT_TXD_PIN         PIND
+#define SERIAL_SOFT_TXD_BIT         3
+#define SERIAL_SOFT_TXD_HI()        do { SERIAL_SOFT_TXD_PORT |=  (1<<SERIAL_SOFT_TXD_BIT); } while (0)
+#define SERIAL_SOFT_TXD_LO()        do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
+#define SERIAL_SOFT_TXD_INIT()      do { \
+    /* pin configuration: output */ \
+    SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
+    /* idle */ \
+    SERIAL_SOFT_TXD_ON(); \
+} while (0)
+
+#endif

keyboards/converter/sun_usb/led.c

@@ -0,0 +1,32 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "protocol/serial.h"
+
+void led_set(uint8_t usb_led)
+{
+    uint8_t sun_led = 0;
+    if (usb_led & (1<<USB_LED_NUM_LOCK))    sun_led |= (1<<0);
+    if (usb_led & (1<<USB_LED_COMPOSE))     sun_led |= (1<<1);
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) sun_led |= (1<<2);
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))   sun_led |= (1<<3);
+    xprintf("LED: %02X\n", usb_led);
+
+    serial_send(0x0E);
+    serial_send(sun_led);
+}

keyboards/converter/sun_usb/matrix.c

@@ -0,0 +1,197 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "protocol/serial.h"
+
+/*
+ * Matrix Array usage:
+ *
+ * ROW: 16(4bits)
+ * COL:  8(3bits)
+ *
+ *    8bit wide
+ *   +---------+
+ *  0|00 ... 07|
+ *  1|08 ... 0F|
+ *  :|   ...   |
+ *  :|   ...   |
+ *  E|70 ... 77|
+ *  F|78 ... 7F|
+ *   +---------+
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code)      ((code>>3)&0xF)
+#define COL(code)      (code&0x07)
+
+static bool is_modified = false;
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    /* DDRD |= (1<<6); */
+    /* PORTD |= (1<<6); */
+    debug_enable = true;
+
+    serial_init();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+    /* // wait for keyboard coming up */
+    /* // otherwise LED status update fails */
+    /* print("Reseting "); */
+    /* while (1) { */
+    /*     print("."); */
+    /*     while (serial_recv()); */
+    /*     serial_send(0x01); */
+    /*     _delay_ms(500); */
+    /*     if (serial_recv() == 0xFF) { */
+    /*         _delay_ms(500); */
+    /*         if (serial_recv() == 0x04) */
+    /*             break; */
+    /*     } */
+    /* } */
+    /* print(" Done\n"); */
+
+    /* PORTD &= ~(1<<6); */
+
+    matrix_init_quantum();
+    return;
+}
+
+uint8_t matrix_scan(void)
+{
+    uint8_t code;
+    code = serial_recv();
+    if (!code) return 0;
+
+    debug_hex(code); debug(" ");
+
+    switch (code) {
+        case 0xFF:  // reset success: FF 04
+            print("reset: ");
+            _delay_ms(500);
+            code = serial_recv();
+            xprintf("%02X\n", code);
+            if (code == 0x04) {
+                // LED status
+                led_set(host_keyboard_leds());
+            }
+            return 0;
+        case 0xFE:  // layout: FE <layout>
+            print("layout: ");
+            _delay_ms(500);
+            xprintf("%02X\n", serial_recv());
+            return 0;
+        case 0x7E:  // reset fail: 7E 01
+            print("reset fail: ");
+            _delay_ms(500);
+            xprintf("%02X\n", serial_recv());
+            return 0;
+        case 0x7F:
+            // all keys up
+            for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+            return 0;
+    }
+
+    if (code&0x80) {
+        // break code
+        if (matrix_is_on(ROW(code), COL(code))) {
+            matrix[ROW(code)] &= ~(1<<COL(code));
+        }
+    } else {
+        // make code
+        if (!matrix_is_on(ROW(code), COL(code))) {
+            matrix[ROW(code)] |=  (1<<COL(code));
+        }
+    }
+
+    matrix_scan_quantum();
+    return code;
+}
+
+bool matrix_is_modified(void)
+{
+    return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop(matrix[i]);
+    }
+    return count;
+}

keyboards/converter/sun_usb/readme.md

@@ -0,0 +1,89 @@
+# Sun to USB keyboard protocol converter
+
+A converter for using non-USB Sun keyboards.
+
+Original code from the [TMK firmware](https://github.com/tmk/tmk_keyboard/tree/master/converter/sun_usb). Ported to QMK by [Yann Hodique](https://github.com/sigma).
+
+Keyboard Maintainer: [Yann Hodique](https://github.com/sigma)  
+Hardware Supported: See hardware section below  
+Hardware Availability: self-built
+
+Make example for this keyboard (after setting up your build environment):
+
+    make converter/sun_usb/type5:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+
+## Hardware
+
+Target MCU is ATMega32u4 but other USB capable AVR will also work. The maintainer mostly uses Teensy 2.0 boards.
+Supported keyboards: Sun Type 3 and 5 Keyboards,
+
+### Connector
+
+8Pin mini DIN
+
+       ___ ___
+      /  |_|  \
+     / 8  7  6 \
+    | 5    4  3 |
+     \_ 2   1 _/
+       \_____/
+    (receptacle)
+
+
+Wiring:
+
+    Pin mini DIN        MCU
+    ----------------------------------
+    1   GND             GND
+    2   GND             GND
+    3   5V
+    4   RX/TX(Mouse)
+    5   RX              PD3
+    6   TX              PD2
+    7   GND             GND
+    8   5V              VCC
+
+
+### Protocol
+
+    Signal: Asynchronous, Negative logic, 1200baud, No Flow control
+    Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit
+
+    AVR USART engine expects positive logic while Sun keyboard signal is negative.
+    To use AVR UART engine you need external inverter in front of RX and TX pin.
+    Otherwise you can software serial routine to communicate the keyboard.
+
+This converter uses software method, you doesn't need any inverter part.
+
+
+Commands From System To Keyboard
+
+    0x01 Reset
+            Keyboard responds with following byte sequence:
+            Success: 0xFF 0x04 0x7F
+            Fail:    0x7E 0x01 0x7F
+    0x02 Bell On
+    0x03 Bell Off
+    0x0A Click On
+    0x0B Click Off
+    0x0E LED
+            followed by LED status byte:
+            bit: 3       2       1       0
+            LED: CapsLk  ScrLk   Compose NumLk
+    0x0F Layout
+            Keyboard responds with 'Layout Response' 0xFE 0xXX
+
+Commands From Keyboard To System
+
+    0x7F Idle
+            means no keys pressed.
+    0xFE Layout Response
+    0xFF Reset Response(followed by 0x04)
+     
+References
+
+* http://kentie.net/article/sunkbd/page2.htm
+* http://kentie.net/article/sunkbd/KBD.pdf

keyboards/converter/sun_usb/rules.mk

@@ -0,0 +1,44 @@
+MCU = atmega32u4       # Teensy 2.0
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+BOOTLOADER = lufa-dfu
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+CUSTOM_MATRIX = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#HARDWARE_SERIAL = yes
+
+SRC += matrix.c led.c
+
+ifdef HARDWARE_SERIAL
+        SRC += protocol/serial_uart.c
+        OPT_DEFS += -DHARDWARE_SERIAL
+else
+        SRC += protocol/serial_soft.c
+endif
+
+DEFAULT_FOLDER = converter/sun_usb/type5

keyboards/converter/sun_usb/type3/keymaps/default/keymap.c

@@ -0,0 +1,29 @@
+/*
+  Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  LAYOUT(
+      KC_F10,KC_F11,  KC_F1, KC_F2, KC_F3,   KC_F4,     KC_F5,    KC_F6,     KC_F7,    KC_F8, KC_F9, KC_BSPC,  KC_VOLD, KC_MUTE, KC_VOLU,
+      KC_F12,KC_F13,  KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,  KC_MPRV, KC_MPLY, KC_MNXT,
+      KC_F14,KC_F15,  KC_TAB,  KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P, KC_LBRC,KC_RBRC,   KC_DEL,   KC_HOME, KC_UP,   KC_PGUP,
+      KC_F16,KC_F17,  KC_LCTL,   KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,        KC_ENT,  KC_LEFT,KC_INSERT,KC_RIGHT,
+      KC_F18,KC_F19,  KC_LSFT,     KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,KC_RCTL,  KC_END,  KC_DOWN,KC_PGDOWN,
+                      KC_LGUI,KC_LALT,                      KC_SPC,                        KC_RALT,KC_RGUI
+         ),
+};

keyboards/converter/sun_usb/type3/type3.h

@@ -0,0 +1,66 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef TYPE3_H
+#define TYPE3_H
+
+#include "quantum.h"
+
+/* Sun type 3 keyboard
+,-------.  ,-----------------------------------------------------------.  ,-----------.
+| 01| 03|  | 05| 06|     08|     0A|     0C|     0E|     10| 11| 12| 2B|  | 15| 16| 17|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 19| 1A|  | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A|  | 2D| 2E| 2F|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 31| 33|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 42  |  | 44| 45| 46|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 48| 49|  |  4C  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |  | 5B| 5C| 5D|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 5F| 61|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E| 6F|  | 70| 71| 72|
+`-------'  |-----------------------------------------------------------|  `-----------'
+           | 77 | 78  |               79                  | 7A  |   13 |
+           `-----------------------------------------------------------'
+*/
+
+
+#define LAYOUT(                                                         \
+    K01,K03,  K05,K06,    K08,    K0A,    K0C,    K0E,    K10,K11,K12,K2B,  K15,K16,K17, \
+    K19,K1A,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2D,K2E,K2F, \
+    K31,K33,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K42,  K44,K45,K46, \
+    K48,K49,  K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,  K5B,K5C,K5D, \
+    K5F,K61,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,     K6E,K6F,  K70,K71,K72, \
+              K77,K78,                    K79,                    K7A,K13                \
+) { \
+    { KC_NO,  K01 , KC_NO,  K03 , KC_NO,  K05 ,  K06 , KC_NO }, \
+    {  K08 , KC_NO,  K0A , KC_NO,  K0C , KC_NO,  K0E , KC_NO }, \
+    {  K10 ,  K11 ,  K12 ,  K13 , KC_NO,  K15 ,  K16 ,  K17  }, \
+    { KC_NO,  K19 ,  K1A , KC_NO, KC_NO,  K1D ,  K1E ,  K1F  }, \
+    {  K20 ,  K21 ,  K22 ,  K23 ,  K24 ,  K25 ,  K26 ,  K27  }, \
+    {  K28 ,  K29 ,  K2A ,  K2B , KC_NO,  K2D ,  K2E ,  K2F  }, \
+    { KC_NO,  K31 , KC_NO,  K33 , KC_NO,  K35 ,  K36 ,  K37  }, \
+    {  K38 ,  K39 ,  K3A ,  K3B ,  K3C ,  K3D ,  K3E ,  K3F  }, \
+    {  K40 ,  K41 ,  K42 , KC_NO,  K44 ,  K45 ,  K46 , KC_NO }, \
+    {  K48 ,  K49 , KC_NO, KC_NO,  K4C ,  K4D ,  K4E ,  K4F  }, \
+    {  K50 ,  K51 ,  K52 ,  K53 ,  K54 ,  K55 ,  K56 ,  K57  }, \
+    {  K58 ,  K59 , KC_NO,  K5B ,  K5C ,  K5D , KC_NO,  K5F  }, \
+    { KC_NO,  K61 , KC_NO,  K63 ,  K64 ,  K65 ,  K66 ,  K67  }, \
+    {  K68 ,  K69 ,  K6A ,  K6B ,  K6C ,  K6D ,  K6E ,  K6F  }, \
+    {  K70 ,  K71 ,  K72 , KC_NO, KC_NO, KC_NO, KC_NO,  K77  }, \
+    {  K78 ,  K79 ,  K7A , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }  \
+}
+
+#endif

keyboards/converter/sun_usb/type5/keymaps/default/keymap.c

@@ -0,0 +1,30 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* LAYOUT_jp_unix is a superset of the other layouts, hence the default */
+  LAYOUT_jp_unix(
+      KC_HELP,              KC_NO,   KC_F1,KC_F2,KC_F3,KC_F4, KC_F5,KC_F6,KC_F7,KC_F8, KC_F9,KC_F10,KC_F11,KC_F12,   KC_PSCR,KC_SLCK,KC_PAUS,  KC_MUTE,KC_VOLD,KC_VOLU,KC_PWR,
+      KC_STOP,   KC_AGAIN,  KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,  KC_INS, KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,
+      KC_MENU,   KC_UNDO,   KC_TAB,  KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,  KC_BSPC,    KC_DEL, KC_END, KC_PGDN,  KC_P7,  KC_P8, KC_P9,  KC_PPLS,
+      KC_SELECT, KC_COPY,   KC_LCTL,   KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,     KC_ENT,                               KC_P4,  KC_P5, KC_P6,
+      KC_EXECUTE,KC_PASTE,  KC_LSFT,     KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,      KC_RSFT,            KC_UP,            KC_P1,  KC_P2, KC_P3,  KC_PENT,
+      KC_FIND,   KC_CUT,    KC_CAPS,KC_LALT,KC_LGUI,KC_HENK,    KC_SPC,     KC_MHEN,KC_KANA,KC_RGUI,KC_APP,KC_RALT,  KC_LEFT,KC_DOWN,KC_RGHT,      KC_P0,     KC_PDOT
+                 ),
+};

keyboards/converter/sun_usb/type5/keymaps/sigma/keymap.c

@@ -0,0 +1,31 @@
+/*
+Copyright 2018 Yann Hodique <yann.hodique@gmail.com> @sigma
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "sigma.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] =
+  {
+   [_QWERTY] = LAYOUT_us_unix(
+      KC_LEAD,                 KC_SCRT, KC_F1,KC_F2,KC_F3,KC_F4, KC_F5,KC_F6,KC_F7,KC_F8, KC_F9,KC_F10,KC_F11,KC_F12,   KC_PSCR,KC_SLCK,KC_PAUS,  KC_MUTE,KC_VOLD,KC_VOLU,KC_OS_LOCK,
+      KC_STOP,   KC_OS_REDO,   KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,  KC_INS, KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,
+      VRSN,      KC_OS_UNDO,   KC_TAB,  KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,  KC_BSPC,    KC_DEL, KC_END, KC_PGDN,  KC_P7,  KC_P8, KC_P9,  KC_PPLS,
+      KC_MAKE,   KC_OS_COPY,   KC_LCTL,   KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,     KC_ENT,                               KC_P4,  KC_P5, KC_P6,
+      KC_EXECUTE,KC_OS_PASTE,  KC_LSFT,     KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,      KC_RSFT,           KC_UP,             KC_P1,  KC_P2, KC_P3,  KC_PENT,
+      KC_FIND,   KC_OS_CUT,    KC_CAPS,KC_LGUI,KC_LALT,              KC_SPC,                   KC_RGUI,KC_APP,KC_RALT,  KC_LEFT,KC_DOWN,KC_RGHT,  KC_P0,         KC_PDOT
+                              ),
+  };

keyboards/converter/sun_usb/type5/keymaps/sigma/readme.md

@@ -0,0 +1,12 @@
+Overview
+========
+
+This is my personal Sun Type 5 configuration.
+
+How to build
+------------
+
+    make converter/sun_usb/type5:sigma:teensy
+
+Layers
+------

keyboards/converter/sun_usb/type5/keymaps/sigma/rules.mk

@@ -0,0 +1 @@
+BOOTLOADER = halfkay

keyboards/converter/sun_usb/type5/type5.h

@@ -0,0 +1,148 @@
+/*
+  Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef TYPE5_H
+#define TYPE5_H
+
+#include "quantum.h"
+
+/* sun type 5 keyboard, JP Unix-style
+,-------.  ,---,  ,---------------. ,---------------. ,---------------.   ,-----------. ,---------------.
+|   76  |  | 0F|  | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B|   | 16| 17| 15| | 2D| 02| 04| 30|
+`-------'  `---'  `---------------' `---------------' `---------------'   `-----------' `---------------'
+,-------.  ,-----------------------------------------------------------.  ,-----------. ,---------------.
+| 01| 03|  | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A|  | 2C| 34| 60| | 62| 2E| 2F| 47|
+|-------|  |-----------------------------------------------------------|  |------------ |---------------|
+| 19| 1A|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B  |  | 42| 4A| 7B| | 44| 45| 46|   |
+|-------|  |-----------------------------------------------------------|  `-----------' |-----------| 7D|
+| 31| 33|  |  4C  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |                | 5B| 5C| 5D|   |
+|-------|  |-----------------------------------------------------------|      ,---.     |-----------|---|
+| 48| 49|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E    |      | 14|     | 70| 71| 72|   |
+|-------|  |-----------------------------------------------------------|  .-----------. |-----------| 5A|
+| 5F| 61|  | 77 | 13| 78 |*73 |       79         |*74 |*75| 7A | 43| 0D|  | 18| 1B| 1C| |   5E  | 32|   |
+`-------'  `-----------------------------------------------------------'  `-----------' `---------------'
+*/
+#define LAYOUT_jp_unix(                                                 \
+      K76,    K0F,  K05,K06,K08,K0A,   K0C,K0E,K10,K11,   K12,K07,K09,K0B,  K16,K17,K15,  K2D,K02,K04,K30, \
+    K01,K03,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2C,K34,K60,  K62,K2E,K2F,K47, \
+    K19,K1A,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K2B,  K42,K4A,K7B,  K44,K45,K46,K7D, \
+    K31,K33,  K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,                K5B,K5C,K5D,     \
+    K48,K49,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,         K6E,      K14,      K70,K71,K72,K5A, \
+    K5F,K61,  K77,K13, K78, K73,        K79,      K74, K75, K7A, K43, K0D,  K18,K1B,K1C,  K5E,    K32      \
+) { \
+    { KC_NO,  K01 ,  K02 ,  K03 ,  K04 ,  K05 ,  K06 ,  K07  }, \
+    {  K08 ,  K09 ,  K0A ,  K0B ,  K0C ,  K0D ,  K0E ,  K0F ,}, \
+    {  K10 ,  K11 ,  K12 ,  K13 ,  K14 ,  K15 ,  K16 ,  K17  }, \
+    {  K18 ,  K19 ,  K1A ,  K1B ,  K1C ,  K1D ,  K1E ,  K1F  }, \
+    {  K20 ,  K21 ,  K22 ,  K23 ,  K24 ,  K25 ,  K26 ,  K27  }, \
+    {  K28 ,  K29 ,  K2A ,  K2B ,  K2C ,  K2D ,  K2E ,  K2F  }, \
+    {  K30 ,  K31 ,  K32 ,  K33 ,  K34 ,  K35 ,  K36 ,  K37  }, \
+    {  K38 ,  K39 ,  K3A ,  K3B ,  K3C ,  K3D ,  K3E ,  K3F  }, \
+    {  K40 ,  K41 ,  K42 ,  K43 ,  K44 ,  K45 ,  K46 ,  K47  }, \
+    {  K48 ,  K49 ,  K4A , KC_NO,  K4C ,  K4D ,  K4E ,  K4F  }, \
+    {  K50 ,  K51 ,  K52 ,  K53 ,  K54 ,  K55 ,  K56 ,  K57  }, \
+    {  K58 ,  K59 ,  K5A ,  K5B ,  K5C ,  K5D ,  K5E ,  K5F  }, \
+    {  K60 ,  K61 ,  K62 ,  K63 ,  K64 ,  K65 ,  K66 ,  K67  }, \
+    {  K68 ,  K69 ,  K6A ,  K6B ,  K6C ,  K6D ,  K6E , KC_NO }, \
+    {  K70 ,  K71 ,  K72 ,  K73 ,  K74 ,  K75 ,  K76 ,  K77  }, \
+    {  K78 ,  K79 ,  K7A ,  K7B , KC_NO,  K7D , KC_NO, KC_NO }  \
+}
+
+/* Sun type 5 keyboard, US Unix-style
+,-------.  ,---,  ,---------------. ,---------------. ,---------------.   ,-----------. ,---------------.
+|   76  |  | 0F|  | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B|   | 16| 17| 15| | 2D| 02| 04| 30|
+`-------'  `---'  `---------------' `---------------' `---------------'   `-----------' `---------------'
+,-------.  ,-----------------------------------------------------------.  ,-----------. ,---------------.
+| 01| 03|  | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A|  | 2C| 34| 60| | 62| 2E| 2F| 47|
+|-------|  |-----------------------------------------------------------|  |------------ |---------------|
+| 19| 1A|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B  |  | 42| 4A| 7B| | 44| 45| 46|   |
+|-------|  |-----------------------------------------------------------|  `-----------' |-----------| 7D|
+| 31| 33|  |  4C  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |                | 5B| 5C| 5D|   |
+|-------|  |-----------------------------------------------------------|      ,---.     |-----------|---|
+| 48| 49|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E    |      | 14|     | 70| 71| 72|   |
+|-------|  |-----------------------------------------------------------|  .-----------. |-----------| 5A|
+| 5F| 61|  | 77 | 13| 78 |            79                 |  7A | 43| 0D|  | 18| 1B| 1C| |   5E  | 32|   |
+`-------'  `-----------------------------------------------------------'  `-----------' `---------------'
+*/
+#define LAYOUT_us_unix(                                                 \
+      K76,    K0F,  K05,K06,K08,K0A,   K0C,K0E,K10,K11,   K12,K07,K09,K0B,  K16,K17,K15,  K2D,K02,K04,K30, \
+    K01,K03,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2C,K34,K60,  K62,K2E,K2F,K47, \
+    K19,K1A,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K2B,  K42,K4A,K7B,  K44,K45,K46,K7D, \
+    K31,K33,  K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,                K5B,K5C,K5D,     \
+    K48,K49,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,         K6E,      K14,      K70,K71,K72,K5A, \
+    K5F,K61,  K77,K13, K78,             K79,                K7A, K43, K0D,  K18,K1B,K1C,  K5E,    K32      \
+) { \
+    { KC_NO,  K01 ,  K02 ,  K03 ,  K04 ,  K05 ,  K06 ,  K07  }, \
+    {  K08 ,  K09 ,  K0A ,  K0B ,  K0C ,  K0D ,  K0E ,  K0F ,}, \
+    {  K10 ,  K11 ,  K12 ,  K13 ,  K14 ,  K15 ,  K16 ,  K17  }, \
+    {  K18 ,  K19 ,  K1A ,  K1B ,  K1C ,  K1D ,  K1E ,  K1F  }, \
+    {  K20 ,  K21 ,  K22 ,  K23 ,  K24 ,  K25 ,  K26 ,  K27  }, \
+    {  K28 ,  K29 ,  K2A ,  K2B ,  K2C ,  K2D ,  K2E ,  K2F  }, \
+    {  K30 ,  K31 ,  K32 ,  K33 ,  K34 ,  K35 ,  K36 ,  K37  }, \
+    {  K38 ,  K39 ,  K3A ,  K3B ,  K3C ,  K3D ,  K3E ,  K3F  }, \
+    {  K40 ,  K41 ,  K42 ,  K43 ,  K44 ,  K45 ,  K46 ,  K47  }, \
+    {  K48 ,  K49 ,  K4A , KC_NO,  K4C ,  K4D ,  K4E ,  K4F  }, \
+    {  K50 ,  K51 ,  K52 ,  K53 ,  K54 ,  K55 ,  K56 ,  K57  }, \
+    {  K58 ,  K59 ,  K5A ,  K5B ,  K5C ,  K5D ,  K5E ,  K5F  }, \
+    {  K60 ,  K61 ,  K62 ,  K63 ,  K64 ,  K65 ,  K66 ,  K67  }, \
+    {  K68 ,  K69 ,  K6A ,  K6B ,  K6C ,  K6D ,  K6E , KC_NO }, \
+    {  K70 ,  K71 ,  K72 , KC_NO, KC_NO, KC_NO,  K76 ,  K77  }, \
+    {  K78 ,  K79 ,  K7A ,  K7B , KC_NO,  K7D , KC_NO, KC_NO }  \
+}
+
+/* Sun type 5 keyboard, US ANSI-style
+   ,-------.  ,---,  ,---------------. ,---------------. ,---------------.   ,-----------. ,---------------.
+   |   76  |  | 1D|  | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B|   | 16| 17| 15| | 2D| 02| 04| 30|
+   `-------'  `---'  `---------------' `---------------' `---------------'   `-----------' `---------------'
+   ,-------.  ,-----------------------------------------------------------.  ,-----------. ,---------------.
+   | 01| 03|  | 2A| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29|   2B  |  | 2C| 34| 60| | 62| 2E| 2F| 47|
+   |-------|  |-----------------------------------------------------------|  |------------ |---------------|
+   | 19| 1A|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 58  |  | 42| 4A| 7B| | 44| 45| 46|   |
+   |-------|  |-----------------------------------------------------------|  `-----------' |-----------| 7D|
+   | 31| 33|  |  77  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |                | 5B| 5C| 5D|   |
+   |-------|  |-----------------------------------------------------------|      ,---.     |-----------|---|
+   | 48| 49|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E    |      | 14|     | 70| 71| 72|   |
+   |-------|  |-----------------------------------------------------------|  .-----------. |-----------| 5A|
+   | 5F| 61|  |  4C  | 13| 78 |              79              | 7A | 43| 0D|  | 18| 1B| 1C| |   5E  | 32|   |
+   `-------'  `-----------------------------------------------------------'  `-----------' `---------------'
+*/
+#define LAYOUT_ansi(                                                    \
+      K76,    K1D,  K05,K06,K08,K0A,   K0C,K0E,K10,K11,   K12,K07,K09,K0B,  K16,K17,K15,  K2D,K02,K04,K30, \
+    K01,K03,  K2A,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,    K2B,  K2C,K34,K60,  K62,K2E,K2F,K47, \
+    K19,K1A,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K58,  K42,K4A,K7B,  K44,K45,K46,K7D, \
+    K31,K33,  K77,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,                K5B,K5C,K5D,     \
+    K48,K49,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,         K6E,      K14,      K70,K71,K72,K5A, \
+    K5F,K61,  K4C,K13, K78,              K79,               K7A, K43, K0D,  K18,K1B,K1C,  K5E,    K32      \
+) { \
+    { KC_NO,  K01 ,  K02 ,  K03 ,  K04 ,  K05 ,  K06 ,  K07  }, \
+    {  K08 ,  K09 ,  K0A ,  K0B ,  K0C ,  K0D ,  K0E , KC_NO,}, \
+    {  K10 ,  K11 ,  K12 ,  K13 ,  K14 ,  K15 ,  K16 ,  K17  }, \
+    {  K18 ,  K19 ,  K1A ,  K1B ,  K1C ,  K1D ,  K1E ,  K1F  }, \
+    {  K20 ,  K21 ,  K22 ,  K23 ,  K24 ,  K25 ,  K26 ,  K27  }, \
+    {  K28 ,  K29 ,  K2A ,  K2B ,  K2C ,  K2D ,  K2E ,  K2F  }, \
+    {  K30 ,  K31 ,  K32 ,  K33 ,  K34 ,  K35 ,  K36 ,  K37  }, \
+    {  K38 ,  K39 ,  K3A ,  K3B ,  K3C ,  K3D ,  K3E ,  K3F  }, \
+    {  K40 ,  K41 ,  K42 ,  K43 ,  K44 ,  K45 ,  K46 ,  K47  }, \
+    {  K48 ,  K49 ,  K4A , KC_NO,  K4C ,  K4D ,  K4E ,  K4F  }, \
+    {  K50 ,  K51 ,  K52 ,  K53 ,  K54 ,  K55 ,  K56 ,  K57  }, \
+    {  K58 ,  K59 ,  K5A ,  K5B ,  K5C ,  K5D ,  K5E ,  K5F  }, \
+    {  K60 ,  K61 ,  K62 ,  K63 ,  K64 ,  K65 ,  K66 ,  K67  }, \
+    {  K68 ,  K69 ,  K6A ,  K6B ,  K6C ,  K6D ,  K6E , KC_NO }, \
+    {  K70 ,  K71 ,  K72 , KC_NO, KC_NO, KC_NO,  K76 ,  K77  }, \
+    {  K78 ,  K79 ,  K7A ,  K7B , KC_NO,  K7D , KC_NO, KC_NO }  \
+}
+#endif

keyboards/converter/usb_usb/ble/config.h

@@ -1,13 +1,15 @@
-#ifndef CONFIG_BLE_H
-#define CONFIG_BLE_H
+#pragma once
 
 #undef PRODUCT
 #define PRODUCT         QMK BLE Adapter
 #undef DESCRIPTION
-#define DESCRIPTION  
+#define DESCRIPTION
 
 // Turn off the mode leds on the BLE module
 #define ADAFRUIT_BLE_ENABLE_MODE_LEDS 0
 #define ADAFRUIT_BLE_ENABLE_POWER_LED 0
 
-#endif
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+#define NO_ACTION_ONESHOT
+

keyboards/converter/usb_usb/ble/rules.mk

@@ -1,3 +1,23 @@
 BLUETOOTH = AdafruitBLE
 ADAFRUIT_BLE_ENABLE = yes
 F_CPU = 8000000
+
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+EXTRAFLAGS += -flto

keyboards/converter/usb_usb/keymap.c

@@ -1,288 +0,0 @@
-/*
-Copyright 2017 Balz Guenat <balz.guenat@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "keymap_common.h"
-
-
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
-    /* 0: plain Qwerty without layer switching
-     *         ,---------------. ,---------------. ,---------------.
-     *         |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24|
-     * ,---.   |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help  |
-     * `---'   `---------------' `---------------' `---------------' `-----------' `---------------' `-------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|JPY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -| |Stp|Agn|
-     * |-----------------------------------------------------------| |-----------| |---------------| |-------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | |Del|End|PgD| |  7|  8|  9|  +| |Mnu|Und|
-     * |-----------------------------------------------------------| `-----------' |---------------| |-------|
-     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  #|Retn|               |  4|  5|  6|KP,| |Sel|Cpy|
-     * |-----------------------------------------------------------|     ,---.     |---------------| |-------|
-     * |Shft|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |     |Up |     |  1|  2|  3|KP=| |Exe|Pst|
-     * |-----------------------------------------------------------| ,-----------. |---------------| |-------|
-     * |Ctl|Gui|Alt|MHEN|HNJ| Space  |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |  0    |  .|Ent| |Fnd|Cut|
-     * `-----------------------------------------------------------' `-----------' `---------------' `-------'
-     */
-    // KEYMAP_ALL(
-    //           F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    // ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    // GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    // TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    // CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    // LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    // LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    // ),
-    KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-    KEYMAP_ALL(
-              TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-    TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,          TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,
-    GRV, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    CAPS,MPRV,VOLU,MNXT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,     TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,MUTE,VOLD,MPLY,TRNS,TRNS,LEFT,DOWN,UP,  RGHT,TRNS,TRNS,     TRNS,TRNS,                        TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,          TRNS,         TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,TRNS,    TRNS,     TRNS,TRNS,    TRNS,TRNS
-    ),
-};
-
-// const action_t fn_actions[] PROGMEM = {};
-
-const action_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1),
-};
-
-
-
-/*
- * Keymap samples
- */
-#if 0
-    /* ANSI layout
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     * `---'   `---------------' `---------------' `---------------' `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|    Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | |Del|End|PgD| |  7|  8|  9|  +|
-     * |-----------------------------------------------------------| `-----------' |-----------|   |
-     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  Return|               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
-     * |-----------------------------------------------------------| ,-----------. |-----------|   |
-     * |Ctl|Gui|Alt|           Space               |Alt|Gui|App|Ctl| |Lef|Dow|Rig| |      0|  .|Ent|
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP(
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,      PSCR,SLCK,BRK,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
-    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
-    ),
-
-    /* ISO layout
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     * `---'   `---------------' `---------------' `---------------' `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  ^|    Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| Retn| |Del|End|PgD| |  7|  8|  9|  +|
-     * |------------------------------------------------------`    | `-----------' |-----------|   |
-     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|    |               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shft|\  |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|Ent|
-     * |-----------------------------------------------------------| ,-----------. |-----------|   |
-     * |Ctl|Gui|Alt|           Space       |HNK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |      0|  .|   |
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP_ISO(
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,      PSCR,SLCK,BRK,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,ENT,      DEL, END, PGDN,    P7,  P8,  P9,  PPLS,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,NUHS,                             P4,  P5,  P6,
-    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RSFT,          UP,           P1,  P2,  P3,  PENT,
-    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT 
-    ),
-
-    /* JIS layout
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     * `---'   `---------------' `---------------' `---------------' `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  ^|JPY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  @|  [| Retn| |Del|End|PgD| |  7|  8|  9|  +|
-     * |------------------------------------------------------`    | `-----------' |-----------|   |
-     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  ]|    |               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shft    |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |     |Up |     |  1|  2|  3|Ent|
-     * |-----------------------------------------------------------| ,-----------. |-----------|   |
-     * |Ctl|Gui|Alt|MHEN|      Space      |HENK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |      0|  .|   |
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP_JIS(
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JPY, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     ENT,      DEL, END, PGDN,    P7,  P8,  P9,  PPLS,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,NUHS,                                  P4,  P5,  P6,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RO,  RSFT,          UP,           P1,  P2,  P3,  PENT,
-    LCTL,LGUI,LALT,MHEN,     SPC,                HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT 
-    ),
-
-    /* Colemak http://colemak.com
-     * ,-----------------------------------------------------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa|
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  F|  P|  G|  J|  L|  U|  Y|  ;|  [|  ]|    \|
-     * |-----------------------------------------------------------|
-     * |BackSp|  A|  R|  S|  T|  D|  H|  N|  E|  I|  O|  '|Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  K|  M|  ,|  ,|  /|Shift     |
-     * |-----------------------------------------------------------|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
-     * `----------------------------------------------------------'
-     */
-    KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, Q,   W,   F,   P,   G,   J,   L,   U,   Y,   SCLN,LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    BSPC,A,   R,   S,   T,   D,   H,   N,   E,   I,   O,   QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,Z,   X,   C,   V,   B,   K,   M,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-
-    /* Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard
-     * ,-----------------------------------------------------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  [|  ]|Backspa|
-     * |-----------------------------------------------------------|
-     * |Tab  |  '|  ,|  .|  P|  Y|  F|  G|  C|  R|  L|  /|  =|    \|
-     * |-----------------------------------------------------------|
-     * |BackSp|  A|  O|  E|  U|  I|  D|  H|  T|  N|  S|  -|Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |  ;|  Q|  J|  K|  X|  B|  M|  Wl  V|  Z|Shift     |
-     * |-----------------------------------------------------------|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   LBRC,RBRC,JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, QUOT,COMM,DOT, P,   Y,   F,   G,   C,   R,   L,   SLSH,EQL,      BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    CAPS,A,   O,   E,   U,   I,   D,   H,   T,   N,   S,   MINS,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,SCLN,Q,   J,   K,   X,   B,   M,   W,   V,   Z,        RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-
-    /* Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/
-     * ,-----------------------------------------------------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa|
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  D|  R|  W|  B|  J|  F|  U|  P|  ;|  [|  ]|    \|
-     * |-----------------------------------------------------------|
-     * |CapsLo|  A|  S|  H|  T|  G|  Y|  N|  E|  O|  I|  '|Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  M|  C|  V|  K|  L|  ,|  ,|  /|Shift     |
-     * |-----------------------------------------------------------|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, Q,   D,   R,   W,   B,   J,   F,   U,   P,   SCLN,LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    CAPS,A,   S,   H,   T,   G,   Y,   N,   E,   O,   I,   QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,Z,   X,   M,   C,   V,   K,   L,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-
-
-/*
- * SpaceFN layout
- * http://geekhack.org/index.php?topic=51069.0
- */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: plain Qwerty
-     *         ,---------------. ,---------------. ,---------------.
-     *         |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24|
-     * ,---.   |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help  |
-     * `---'   `---------------' `---------------' `---------------' `-----------' `---------------' `-------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|JPY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -| |Stp|Agn|
-     * |-----------------------------------------------------------| |-----------| |---------------| |-------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | |Del|End|PgD| |  7|  8|  9|  +| |Mnu|Und|
-     * |-----------------------------------------------------------| `-----------' |---------------| |-------|
-     * |LCtrl |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  #|Retn|               |  4|  5|  6|KP,| |Sel|Cpy|
-     * |-----------------------------------------------------------|     ,---.     |---------------| |-------|
-     * |Shft|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |     |Up |     |  1|  2|  3|KP=| |Exe|Pst|
-     * |-----------------------------------------------------------| ,-----------. |---------------| |-------|
-     * |Ctl|Gui|Alt|MHEN|HNJ| Space  |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |  0    |  .|Ent| |Fnd|Cut|
-     * `-----------------------------------------------------------' `-----------' `---------------' `-------'
-     */
-    [0] = KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     FN0,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-
-    /* 1: SpaceFN
-     * ,-----------------------------------------------------------.
-     * |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
-     * |-----------------------------------------------------------|
-     * |Caps |   |   |Esc|   |   |   |Hom|Up |End|Psc|Slk|Pau|Ins  |
-     * |-----------------------------------------------------------|
-     * |      |   |   |   |   |   |PgU|Lef|Dow|Rig|   |   |        |
-     * |-----------------------------------------------------------|
-     * |        |   |   |   |   |Spc|PgD|`  |~  |   |Men|          |
-     * |-----------------------------------------------------------|
-     * |    |    |    |                        |    |    |    |    |
-     * `-----------------------------------------------------------'
-     */
-    [1] = KEYMAP_ALL(
-              TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-    TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,          TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,
-    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, TRNS,DEL,      TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    CAPS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP,  END, PSCR,SLCK,PAUS,     INS,      TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS,     TRNS,TRNS,                        TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,APP,      TRNS,TRNS,          TRNS,         TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,TRNS,    TRNS,     TRNS,TRNS,    TRNS,TRNS
-    ),
-};
-
-const action_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
-    [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),    // tilde
-};
-
-#endif

keyboards/crkbd/keymaps/drashna/config.h

@@ -0,0 +1,45 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+// #define TAPPING_FORCE_HOLD
+// #define TAPPING_TERM 100
+
+#ifdef RGBLIGHT_ENABLE
+#undef RGBLED_NUM
+#define RGBLED_NUM 27
+
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 120
+#endif

keyboards/crkbd/keymaps/drashna/glcdfont.c

@@ -0,0 +1,244 @@
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Standard ASCII 5x7 font
+
+static const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x0E, 0x3F, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFE, 0xE0, 0x80, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x1E, 0xBE,
+0x7F, 0xFF, 0xFF, 0xFE, 0xFE, 0xF0,
+0xE0, 0xC0, 0x80, 0x00, 0x0E, 0xEF,
+0xDF, 0xDE, 0xBE, 0x3C, 0x38, 0x70,
+0xE0, 0xDD, 0xBB, 0x7B, 0x07, 0x0E,
+0x0E, 0x0C, 0x98, 0xF0, 0xE0, 0xF0,
+0xF0, 0xF8, 0x78, 0x3C, 0x1C, 0x1E,
+0x0E, 0x0E, 0x0F, 0x0F, 0x0F, 0x0F,
+0x1F, 0xFE, 0xFE, 0xF8, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x03,
+0x0F, 0x3F, 0xFF, 0xFF, 0xFF, 0xFE,
+0xF8, 0xF0, 0xE0, 0xC0, 0x80, 0x7F,
+0xFF, 0xFE, 0xFD, 0xFB, 0x1B, 0x07,
+0x07, 0x0F, 0x1F, 0x1F, 0x1E, 0x1D,
+0x0B, 0x07, 0x01, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xE0,
+0xF8, 0xFE, 0xFF, 0xFF, 0x1F, 0x07,
+0x01, 0x01, 0x01, 0x03, 0x06, 0x06,
+0x0C, 0x0C, 0x08, 0x0C, 0x0C, 0x0E,
+0x07, 0x83, 0xC1, 0xE0, 0x70, 0x30,
+0x18, 0x1C, 0x7C, 0xCC, 0x8C, 0xDC,
+0xF8, 0xC0, 0xE0, 0xE0, 0x70, 0xB8,
+0xF0, 0x60, 0x00, 0x00, 0x80, 0xC0,
+0xE0, 0xF0, 0x70, 0xF8, 0xFC, 0xFC,
+0x3C, 0x30, 0x38, 0xF8, 0xF8, 0xF8,
+0x78, 0x00, 0x80, 0x80, 0xC0, 0xE0,
+0x70, 0x38, 0x38, 0x9C, 0xDC, 0xFC,
+0x7C, 0x38, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x01, 0x03, 0x07,
+0x1F, 0x3F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7E, 0x7D, 0x3B, 0x17, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
+0x0F, 0x1F, 0x3F, 0x3F, 0x7E, 0x7C,
+0x78, 0x70, 0x70, 0x70, 0x70, 0x70,
+0x70, 0x78, 0x38, 0x18, 0x1C, 0x0E,
+0x07, 0x0F, 0x1F, 0x3F, 0x3C, 0x38,
+0x38, 0x18, 0x0C, 0x06, 0x03, 0x01,
+0x01, 0x01, 0x01, 0x0E, 0x1F, 0x1F,
+0x1C, 0x1C, 0x1E, 0x0F, 0x0F, 0x03,
+0x1D, 0x0E, 0x07, 0x03, 0x01, 0x00,
+0x00, 0x0E, 0x1F, 0x1F, 0x1D, 0x1E,
+0x0F, 0x07, 0x03, 0x03, 0x0F, 0x1F,
+0x1F, 0x19, 0x19, 0x19, 0x19, 0x0C,
+0x0C, 0x04, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+#endif // FONT5X7_H

keyboards/crkbd/keymaps/drashna/keymap.c

@@ -0,0 +1,184 @@
+#include QMK_KEYBOARD_H
+#include "drashna.h"
+#ifdef PROTOCOL_LUFA
+  #include "lufa.h"
+  #include "split_util.h"
+#endif
+#ifdef SSD1306OLED
+  #include "ssd1306.h"
+#endif
+
+extern keymap_config_t keymap_config;
+extern uint8_t is_master;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+enum crkbd_keycodes {
+  RGBRST = NEW_SAFE_RANGE
+};
+
+#define LAYOUT_crkbd_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+  ) \
+  LAYOUT_wrapper( \
+    KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_BSPC, \
+    KC_TAB,  K11,    K12,     K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A,     KC_QUOT, \
+    KC_MLSF, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29,  CTL_T(K2A), KC_MRSF, \
+                           LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE                                    \
+  )
+#define LAYOUT_crkbd_base_wrapper(...)       LAYOUT_crkbd_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_crkbd_base_wrapper(
+    _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+    _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+    _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+  ),
+
+  [_COLEMAK] = LAYOUT_crkbd_base_wrapper(
+    _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+    _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+    _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+  ),
+
+  [_DVORAK] = LAYOUT_crkbd_base_wrapper(
+    _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+    _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+    _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+  ),
+
+  [_WORKMAN] = LAYOUT_crkbd_base_wrapper(
+    _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
+    _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
+    _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
+  ),
+
+  [_MODS] = LAYOUT_wrapper(
+      _______, ___________________BLANK___________________,                  ___________________BLANK___________________, _______,
+      _______, ___________________BLANK___________________,                  ___________________BLANK___________________, _______,
+      KC_LSFT, ___________________BLANK___________________,                  ___________________BLANK___________________, KC_RSFT,
+                                     _______, _______, _______,        _______, _______, _______
+  ),
+
+  [_LOWER] = LAYOUT_wrapper(
+    KC_TILD, _________________LOWER_L1__________________,                    _________________LOWER_R1__________________, KC_BSPC,
+    KC_F11,  _________________LOWER_L2__________________,                    _________________LOWER_R2__________________, KC_PIPE,
+    KC_F12,  _________________LOWER_L3__________________,                    _________________LOWER_R3__________________, _______,
+                                     _______, _______, _______,        _______, _______, _______
+  ),
+
+  [_RAISE] = LAYOUT_wrapper( \
+    KC_GRV,  _________________RAISE_L1__________________,                    _________________RAISE_R1__________________, KC_BSPC,
+    _______, _________________RAISE_L2__________________,                    _________________RAISE_R2__________________, KC_BSLS,
+    _______, _________________RAISE_L3__________________,                    _________________RAISE_R3__________________, _______,
+                                     _______, _______, _______,        _______, _______, _______
+  ),
+
+  [_ADJUST] = LAYOUT_wrapper( \
+    KC_MAKE, _________________ADJUST_L1_________________,                    _________________ADJUST_R1_________________, KC_RESET,
+    VRSN,    _________________ADJUST_L2_________________,                    _________________ADJUST_R2_________________, EPRM,
+    TG_MODS, _________________ADJUST_L3_________________,                    _________________ADJUST_R3_________________, KC_MPLY,
+                                     _______, _______, _______,        _______, _______, _______
+  )
+};
+
+int RGB_current_mode;
+
+void matrix_init_keymap(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+    #ifdef SSD1306OLED
+        iota_gfx_init(!has_usb());   // turns on the display
+    #endif
+
+  DDRD &= ~(1<<5);
+  PORTD &= ~(1<<5);
+
+  DDRB &= ~(1<<0);
+  PORTB &= ~(1<<0);}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+void matrix_scan_keymap(void) {
+   iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+  if (is_master) {
+    // If you want to change the display of OLED, you need to change here
+    matrix_write_ln(matrix, read_layer_state());
+    matrix_write_ln(matrix, read_keylog());
+    matrix_write_ln(matrix, read_keylogs());
+    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+    //matrix_write_ln(matrix, read_host_led_state());
+    //matrix_write_ln(matrix, read_timelog());
+  } else {
+    matrix_write(matrix, read_logo());
+  }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  matrix_render_user(&matrix);
+  matrix_update(&display, &matrix);
+}
+
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    set_keylog(keycode, record);
+    // set_timelog();
+  }
+
+  switch (keycode) {
+    case RGB_MOD:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          rgblight_mode_noeeprom(RGB_current_mode);
+          rgblight_step();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      return false;
+      break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+#endif

keyboards/crkbd/keymaps/drashna/rules.mk

@@ -0,0 +1,30 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes             # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# If you want to change the display of OLED, you need to change here
+SRC +=  ./lib/rgb_state_reader.c \
+        ./lib/layer_state_reader.c \
+        ./lib/logo_reader.c \
+        ./lib/keylogger.c \
+        # ./lib/mode_icon_reader.c \
+        # ./lib/host_led_state_reader.c \
+        # ./lib/timelogger.c \

keyboards/dc01/left/config.h

@@ -46,6 +46,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F1, F0, F7, F6, F5 }
 #define UNUSED_PINS
 
+#define F_SCL 300000UL
+
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/dc01/left/matrix.c

@@ -43,7 +43,7 @@ static uint8_t error_count_arrow = 0;
 /* Set 0 if debouncing isn't needed */
 
 #ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
+#    define DEBOUNCING_DELAY 5
 #endif
 
 #if (DEBOUNCING_DELAY > 0)
@@ -135,10 +135,7 @@ uint8_t matrix_cols(void) {
     return MATRIX_COLS;
 }
 
-
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset);
-//uint8_t i2c_transaction_numpad(void);
-//uint8_t i2c_transaction_arrow(void);
 
 //this replases tmk code
 void matrix_setup(void){
@@ -220,7 +217,7 @@ uint8_t matrix_scan(void)
                 matrix[i] &= 0x3F; //mask bits to keep
             }
         }
-    }else{ //no error
+   }else{ //no error
         error_count_right = 0;
     }
     
@@ -440,40 +437,28 @@ static void unselect_cols(void)
 // Complete rows from other modules over i2c
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset) {
     i2c_status_t err = i2c_start((address << 1) | I2C_WRITE, 10);
-    if (err) return err;
-    i2c_write(0x01, 10);
-    if (err) return err;
+    i2c_write(0x01, 10); //request data in address 1
 
-    i2c_start((address << 1) | I2C_READ, 10);
-    if (err) return err;
+    i2c_start((address << 1) | I2C_READ, 5);
 
     err = i2c_read_ack(10);
     if (err == 0x55) { //synchronization byte
 
-    for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
-        matrix[i] &= mask; //mask bits to keep
-        err = i2c_read_ack(10);
-        if (err >= 0) {
-            matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-             return err;
-        }
-      }
-    //last read request must be followed by a NACK
-    matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
-    err = i2c_read_nack(10);
-    if (err >= 0) {
+        for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
+            matrix[i] &= mask; //mask bits to keep
+            err = i2c_read_ack(10);
+                matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
+            }
+        //last read request must be followed by a NACK
+        matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
+        err = i2c_read_nack(10);
         matrix[MATRIX_ROWS - 1] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-            return err;
-        }
+
     } else {
         i2c_stop(10);
         return 1;
     }
 
     i2c_stop(10);
-    if (err) return err;
-
     return 0;
 }

keyboards/dz60/dz60.h

@@ -7,173 +7,275 @@
 
 
 // 标准配列
+/* Standard arrangement / LAYOUT
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
 #define LAYOUT( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
-	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }  \
-}
-
-#define LAYOUT_hhkb( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	      K401,       K403,             K406,                         K411,       K413  \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
-	{ KC_NO, K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, KC_NO, K411,  KC_NO, K413,  KC_NO }  \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,  k0c,   k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,  k1c,   k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,  k2c,   k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,  KC_NO, k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,  k4c,   k4d,  k4e   }  \
 }
 
+/* LAYOUT_true_hhkb
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├────┴┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴┬─────┴───┤
+ * │▓▓▓▓▓│41 │43   │46 (6u)                │4a   │4b │▓▓▓▓▓▓▓▓▓│
+ * └─────┴───┴─────┴───────────────────────┴─────┴───┴─────────┘
+*/
 #define LAYOUT_true_hhkb( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	      K401,       K403,             K406,                   K410, K411  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,       \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+         k41,      k43,            k46,               k4a, k4b  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
-	{ KC_NO, K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, KC_NO, KC_NO }  \
+    { k00,   k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,  k0b,  k0c,   k0d,   k0e   }, \
+    { k10,   KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,  k1b,  k1c,   k1d,   k1e   }, \
+    { k20,   KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,  k2b,  k2c,   k2d,   KC_NO }, \
+    { k30,   k31,   k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,  k3b,  KC_NO, k3d,   k3e   }, \
+    { KC_NO, k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a,  k4b,  KC_NO, KC_NO, KC_NO }  \
 }
 
+/* LAYOUT_60_hhkb
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤
+ * │▓▓▓▓▓│41 │43   │46 (7u)                    │4b   │4d │▓▓▓▓▓│
+ * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
+*/
 #define LAYOUT_60_hhkb( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	      K401,       K403,             K406,                         K411,       K413  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+         k41,      k43,           k46,                     k4b,      k4d       \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
-	{ KC_NO, K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, KC_NO, K411,  KC_NO, K413,  KC_NO }  \
-}
-
-#define LAYOUT_2_shifts( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
-	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 }, \
-	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+    { k00,   k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,   k0b,  k0c,   k0d,  k0e   }, \
+    { k10,   KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,   k1b,  k1c,   k1d,  k1e   }, \
+    { k20,   KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,   k2b,  k2c,   k2d,  KC_NO }, \
+    { k30,   KC_NO, k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,   k3b,  KC_NO, k3d,  k3e   }, \
+    { KC_NO, k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, KC_NO, k4b,  KC_NO, k4d,  KC_NO }  \
 }
 
 // 带方向配列
+/* Directional arrangement | LAYOUT_directional
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┬───┤
+ * │30     │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │
+ * ├────┬──┴─┬─┴──┬┴───┴───┼───┴┬──┴───┴───┼───┼───┼───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
 #define LAYOUT_directional( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
-	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 }, \
-	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,  k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,  k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,  k2c,  k2d,  KC_NO }, \
+    { k30,  KC_NO, k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,  k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,  k4c,  k4d,  k4e   }  \
 }
 
+/* LAYOUT_all
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├───┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┬───┤
+ * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │
+ * ├───┴┬──┴─┬─┴──┬┴───┴───┼───┴┬──┴───┴───┼───┼───┼───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
 #define LAYOUT_all( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214,  \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
-	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 }, \
-	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,  k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,  k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,  k2c,  k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,  k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,  k4c,  k4d,  k4e   }  \
 }
 
+/* LAYOUT_60_ansi
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d        │
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │40  │41  │43  │46                      │4a  │4b  │4d  │4e  │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+*/
 #define LAYOUT_60_ansi( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,      k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d,      \
+    k40, k41,      k43,           k46,                k4a, k4b,      k4d, k4e  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO, K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  KC_NO }, \
-	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO,  KC_NO, K410,  K411,  KC_NO, K413,  K414 }  \
+    { k00,  k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,  k0b,  k0c,   KC_NO, k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,  k1b,  k1c,   k1d,   k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,  k2b,  k2c,   k2d,   KC_NO }, \
+    { k30,  KC_NO, k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,  k3b,  KC_NO, k3d,   KC_NO }, \
+    { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a,  k4b,  KC_NO, k4d,   k4e   }  \
 }
 
+/* LAYOUT_60_iso
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d        │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │40  │41  │43  │46                      │4a  │4b  │4d  │4e  │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+*/
 #define LAYOUT_60_iso( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,      k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d,      \
+    k40, k41,      k43,           k46,                k4a, k4b,      k4d, k4e  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012, KC_NO,  K014 }, \
-	{ K100, KC_NO,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200, KC_NO,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213, KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311, KC_NO,  K313, KC_NO }, \
-	{ K400,  K401, KC_NO,  K403, KC_NO, KC_NO,  K406, KC_NO, KC_NO, KC_NO,  K410,  K411, KC_NO,  K413,  K414 }  \
-}
-
-#define LAYOUT_directional_625_space( \
-	  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	  K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	  K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	  K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
-	  K400, K401,       K403,             K406,                   K410, K411, K412, K413, K414  \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 }, \
-	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+    { k00,  k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,  k0b,  k0c,   KC_NO, k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,  k1b,  k1c,   k1d,   k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,  k2b,  k2c,   k2d,   KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,  k3b,  KC_NO, k3d,   KC_NO }, \
+    { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a,  k4b,  KC_NO, k4d,   k4e   }  \
 }
 
+/* LAYOUT_60_iso_5x1u
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d        │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┬───┤
+ * │40  │41  │43  │46                      │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘
+*/
 #define LAYOUT_60_iso_5x1u( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,     K014, \
-	K100,   K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,   K213, \
-	K200,    K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114,        \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,      K313,      \
-	K400,   K401,   K403,                K406,                K410, K411, K412, K413, K414  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,      k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d,      \
+    k40, k41,      k43,           k46,                k4a, k4b, k4c, k4d, k4e  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012, KC_NO,  K014 }, \
-	{ K100, KC_NO,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200, KC_NO,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213, KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311, KC_NO,  K313, KC_NO }, \
-	{ K400,  K401, KC_NO,  K403, KC_NO, KC_NO,  K406, KC_NO, KC_NO, KC_NO,  K410,  K411,  K412,  K413,  K414 }  \
+    { k00,  k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,  k0b,  k0c,   KC_NO, k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,  k1b,  k1c,   k1d,   k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,  k2b,  k2c,   k2d,   KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,  k3b,  KC_NO, k3d,   KC_NO }, \
+    { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a,  k4b,  k4c,   k4d,   k4e   }  \
 }
 
-#define LAYOUT_60_ansi_split_bs_rshift_5x1u( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	K400, K401,       K403,            K406,              K410, K411, K412, K413, K414  \
+/* LAYOUT_60_b_ansi (maximized DZ60 Plate B layout for ANSI)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3c    │3d │3e │
+ * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_b_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a,      k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
-	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  KC_NO, k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  KC_NO, k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
+/* LAYOUT_60_b_iso (maximized DZ60 Plate B layout for ISO)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬──┴────┤
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3c    │3d │3e │
+ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_b_iso( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a,      k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  KC_NO, k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
 }
 
 #endif

keyboards/dz60/info.json

@@ -9,25 +9,17 @@
       "key_count": 67,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
     },
-    "LAYOUT_hhkb": {
-      "key_count": 61,
-      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Ctrl", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Alt", "x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"x":10, "y":4, "w":1.5}, {"label":"Alt", "x":11.5, "y":4}]
-    },
     "LAYOUT_true_hhkb": {
       "key_count": 61,
       "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Ctrl", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Alt", "x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"x":10, "y":4, "w":1.5}, {"label":"Alt", "x":11.5, "y":4}]
     },
-    "LAYOUT_2_shifts": {
-      "key_count": 68,
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"Shift", "x":12, "y":3}, {"x":13, "y":3}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
-    },
     "LAYOUT_directional": {
       "key_count": 67,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"Shift", "x":12, "y":3}, {"x":13, "y":3}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
     },
     "LAYOUT_all": {
-      "key_count": 69,
-      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"Shift", "x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
+      "key_count": 68,
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"Shift", "x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
     },
     "LAYOUT_60_ansi": {
       "key_count": 61,
@@ -41,17 +33,17 @@
       "key_count": 60,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"\\", "x":13, "y":0}, {"label":"`", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
     },
-    "LAYOUT_directional_625_space": {
-      "key_count": 65,
-      "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K008", "x":8, "y":0}, {"label":"K009", "x":9, "y":0}, {"label":"K010", "x":10, "y":0}, {"label":"K011", "x":11, "y":0}, {"label":"K012", "x":12, "y":0}, {"label":"K013", "x":13, "y":0}, {"label":"K014", "x":14, "y":0}, {"label":"K100", "x":0, "y":1, "w":1.5}, {"label":"K102", "x":1.5, "y":1}, {"label":"K103", "x":2.5, "y":1}, {"label":"K104", "x":3.5, "y":1}, {"label":"K105", "x":4.5, "y":1}, {"label":"K106", "x":5.5, "y":1}, {"label":"K107", "x":6.5, "y":1}, {"label":"K108", "x":7.5, "y":1}, {"label":"K109", "x":8.5, "y":1}, {"label":"K110", "x":9.5, "y":1}, {"label":"K111", "x":10.5, "y":1}, {"label":"K112", "x":11.5, "y":1}, {"label":"K113", "x":12.5, "y":1}, {"label":"K114", "x":13.5, "y":1, "w":1.5}, {"label":"K200", "x":0, "y":2, "w":1.75}, {"label":"K202", "x":1.75, "y":2}, {"label":"K203", "x":2.75, "y":2}, {"label":"K204", "x":3.75, "y":2}, {"label":"K205", "x":4.75, "y":2}, {"label":"K206", "x":5.75, "y":2}, {"label":"K207", "x":6.75, "y":2}, {"label":"K208", "x":7.75, "y":2}, {"label":"K209", "x":8.75, "y":2}, {"label":"K210", "x":9.75, "y":2}, {"label":"K211", "x":10.75, "y":2}, {"label":"K212", "x":11.75, "y":2}, {"label":"K213", "x":12.75, "y":2, "w":2.25}, {"label":"K300", "x":0, "y":3, "w":2}, {"label":"K301", "x":2, "y":3}, {"label":"K302", "x":3, "y":3}, {"label":"K303", "x":4, "y":3}, {"label":"K304", "x":5, "y":3}, {"label":"K305", "x":6, "y":3}, {"label":"K306", "x":7, "y":3}, {"label":"K307", "x":8, "y":3}, {"label":"K308", "x":9, "y":3}, {"label":"K309", "x":10, "y":3}, {"label":"K310", "x":11, "y":3}, {"label":"K312", "x":12, "y":3}, {"label":"K313", "x":13, "y":3}, {"label":"K314", "x":14, "y":3}, {"label":"K400", "x":0, "y":4, "w":1.25}, {"label":"K401", "x":1.25, "y":4, "w":1.25}, {"label":"K403", "x":2.5, "y":4, "w":1.25}, {"label":"K406", "x":3.75, "y":4, "w":6.25}, {"label":"K410", "x":10, "y":4}, {"label":"K411", "x":11, "y":4}, {"label":"K412", "x":12, "y":4}, {"label":"K413", "x":13, "y":4}, {"label":"K414", "x":14, "y":4}]
-    },
     "LAYOUT_60_iso_5x1u": {
       "key_count": 63,
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"|", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"~", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"↑", "x":13, "y":4}, {"label":"→", "x":14, "y":4}]
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"|", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"~", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"↑", "x":13, "y":4}, {"label":"→", "x":14, "y":4}]
     },
-    "LAYOUT_60_ansi_split_bs_rshift_5x1u": {
-      "key_count": 64,
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"\\", "x":13, "y":0}, {"label":"`", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"↑", "x":13, "y":4}, {"label":"→", "x":14, "y":4}]
+    "LAYOUT_60_b_ansi": {
+      "key_count": 66,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"\\", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
+    },
+    "LAYOUT_60_b_iso": {
+      "key_count": 67,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"#", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
     }
   }
 }

keyboards/dz60/keymaps/256k_HHKB/keymap.c

@@ -29,11 +29,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 
 
-	[_DEFAULT] = LAYOUT_hhkb(
+	[_DEFAULT] = LAYOUT_60_hhkb(
 		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSLS, KC_GRV,
 		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC, KC_RBRC, KC_BSPC,
 		KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT, KC_ENT,
-		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,           KC_RSFT, MO(_FN),
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,           KC_RSFT, MO(_FN),
 		            KC_LGUI,             KC_LALT,                      KC_SPC,                    MO(_ALTFN),           MO(_LIGHTS)),
 
 
@@ -55,12 +55,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `---------------------------------------------------------------------------------------------------------------------'
  */
 
-	[_ALTFN] = LAYOUT_hhkb(
+	[_ALTFN] = LAYOUT_60_hhkb(
 
 		MO(_MOUSEFN),  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,   KC_F12,  ______,  KC_PSCR,
 		KC_CAPS,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_UP,  KC_VOLD,   KC_VOLU,  KC_DEL,
 		______,             ______,  ______,  ______,  ______,  ______,  ______,  KC_HOME,  KC_END, KC_LEFT,   KC_DOWN,   KC_RIGHT, ______,
-		______,  ______,   ______,  ______,  ______, ______, ______,   ______,  ______,  KC_MPRV,  KC_MNXT, KC_MPLY,     ______,  ______,
+		______,            ______,  ______,  ______, ______, ______,   ______,  ______,  KC_MPRV,  KC_MNXT, KC_MPLY,     ______,  ______,
 		         ______,           ______,                    ______,                              ______,            ______),
 
 
@@ -85,12 +85,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 
 
-	[_MOUSEFN] = LAYOUT_hhkb(
+	[_MOUSEFN] = LAYOUT_60_hhkb(
 
 		______,  KC_ACL0,   KC_ACL1,   KC_ACL2,   ______,   ______,   ______,   ______,   ______,   ______,   ______,  ______,   ______,  ______,  ______,
 		______,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_MS_UP,    ______,   ______,  ______,
 		______,             ______,  ______,  ______,  ______,  ______,  ______,  ______,   ______,  KC_MS_LEFT,   KC_MS_DOWN,  KC_MS_RIGHT,   ______,
-		______,  ______,   ______,  ______,  ______, ______, ______,   ______,  ______,  ______,  ______, ______,     ______,  ______,
+		______,            ______,  ______,  ______, ______, ______,   ______,  ______,  ______,  ______, ______,     ______,  ______,
 		         ______,           ______,                    ______,                              ______,            ______),
 
 
@@ -116,11 +116,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
 
-	[_FN] = LAYOUT_hhkb(
+	[_FN] = LAYOUT_60_hhkb(
 		______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_INS,  ______,
 		KC_CAPS,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_PSCR, KC_SLCK, KC_PAUS,  KC_UP,   ______,  KC_DEL,
 		______,           KC_VOLD, KC_VOLU, KC_MUTE, ______,  ______,  KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT,  KC_RGHT, ______,
-		______,  ______,  KC_MPRV, KC_MPLY, KC_MNXT, ______,  ______,  KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN,           ______,  ______,
+		______,           KC_MPRV, KC_MPLY, KC_MNXT, ______,  ______,  KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN,           ______,  ______,
 		         ______,           ______,                    ______,                                      ______,            ______),
 
 
@@ -146,11 +146,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
 
-	[_LIGHTS] = LAYOUT_hhkb(
+	[_LIGHTS] = LAYOUT_60_hhkb(
 		RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, ______, ______, ______, ______, ______, ______,
 		RGB_MOD,          RGB_HUI, RGB_SAI, RGB_VAI,  ______,   ______,  ______,  ______,  ______, ______, ______, ______, ______, ______,
 		______,           RGB_HUD, RGB_SAD, RGB_VAD,  ______,   ______,  ______,  ______,  ______, ______, ______, ______, ______,
-		______,  ______,  ______,  ______,  ______,   ______,  ______,  ______,  ______,  ______, ______, ______,         ______, ______,
+		______,           ______,  ______,  ______,   ______,  ______,  ______,  ______,  ______, ______, ______,         ______, ______,
 		         ______,           ______,                      ______,                                    ______,         ______),
 
 };

keyboards/dz60/keymaps/60_ansi/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_60_ansi(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
+		KC_LCTL, KC_LGUI,          KC_LALT,                   KC_SPC,                             KC_RALT, KC_RGUI,          MO(1),   KC_RCTL),
+
+	LAYOUT_60_ansi(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,
+		KC_TRNS,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+		KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_HOME, KC_PGUP, KC_TRNS,
+		KC_TRNS,          KC_TRNS, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, KC_TRNS, KC_DEL,  KC_END,  KC_PGDN,          KC_TRNS,
+		KC_TRNS, KC_TRNS,          KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS)
+};

keyboards/dz60/keymaps/60_ansi/readme.md

@@ -0,0 +1,9 @@
+![60_ansi DZ60 base layer](https://i.imgur.com/MqBLh3D.png)
+
+![60_ansi DZ60 fn layer](https://i.imgur.com/ml1djHi.png)
+
+# 60_ansi DZ60 Layout
+
+This is a basic keymap for the 60_ansi layout of the DZ60.
+The default layer is normal ANSI and the Fn layer is used for RGB
+and backlighting functions.

keyboards/dz60/keymaps/60_ansi_arrow_fkeys/config.h

@@ -0,0 +1 @@
+#define GRAVE_ESC_GUI_OVERRIDE    # Always send Escape if GUI is pressed

keyboards/dz60/keymaps/60_ansi_arrow_fkeys/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 #define ______ KC_TRNS
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -20,11 +18,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-----------------------------------------------------------------------------------------'
    */
 
-  LAYOUT_2_shifts(
-      F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, ______, KC_BSPC,
+  LAYOUT_directional(
+      KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, ______, KC_BSPC,
       KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
       KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-      KC_LSFT, ______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL,
+      KC_LSFT,         KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL,
       KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT
       ),
 
@@ -50,37 +48,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______
       ),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/dz60/keymaps/60_plus_arrows/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 #define ______ KC_TRNS
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -20,11 +18,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------------'
  */
 
-  LAYOUT_2_shifts(
+  LAYOUT_directional(
       KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, ______, KC_BSPC,
       KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
       KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-      KC_LSFT, ______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1),
+      KC_LSFT,         KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1),
       KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT
       ),
 
@@ -50,37 +48,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______
       ),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/dz60/keymaps/Ansi_plus_fn_arrows/config.h

@@ -0,0 +1 @@
+#define GRAVE_ESC_GUI_OVERRIDE    # Always send Escape if GUI is pressed

keyboards/dz60/keymaps/Ansi_plus_fn_arrows/keymap.c

@@ -1,11 +1,9 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 	LAYOUT(
-		F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
 		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
@@ -25,37 +23,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/dz60/keymaps/boris_burger/README.md

@@ -0,0 +1,52 @@
+### boris_burger's DZ60 layout
+
+This layout is for a DZ60 with a 2U left shift, 1U right shift and an arrow cluster in
+the bottom right.
+
+It is based off stephengrier's layout adding support for Home/End/PgUp/PgDn using Fn+arrows
+as used on macOS and Microsoft Surface. It has Insert instead of Fn near the arrow cluster
+and other smaller tweaks:
+- CapsLock is the only Fn key (CapsLock by itself is not available)
+- Del is available as Fn+Backspace
+- Ctrl+Del is available as Ctrl+Backspace (e.g. deleting word to the right of the cursor)
+- Shift+Del is available as Shift+Backspace (e.g. permanently deleting file or e-mail)
+- PgUp = Fn+Up
+- PgDn = Fn+Down
+- Home = Fn+Left
+- End = Fn+Right
+- Tilde = Shift+Esc 
+- Backtick = Fn+Esc
+- Underglow toggle and mode selection are available as Fn+Q and Fn+W
+- Reset (bootloader mode) = Fn+B
+
+### 0 Qwerty
+```
+,-----------------------------------------------------------------------------------------.
+| Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+|-----------------------------------------------------------------------------------------+
+| Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+|-----------------------------------------------------------------------------------------+
+|   Fn    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+|-----------------------------------------------------------------------------------------+
+| Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | Ins |
+|-----------------------------------------------------------------------------------------+
+| Ctrl |  Win  |  Alt  |              Space                | Alt | Menu |  L  |  D  |  R  |
+`-----------------------------------------------------------------------------------------'
+```
+
+### 1 Fn Layer
+```
+FN Layer
+,-----------------------------------------------------------------------------------------.
+|  `  |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
+|-----------------------------------------------------------------------------------------+
+|        |RBB T|RGB M| Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |     |      |     |       |
+|-----------------------------------------------------------------------------------------+
+|         | BL T| BL M| BL+ | BL- |     |     |     |     |     |     |     |             |
+|-----------------------------------------------------------------------------------------+
+|           |     |     |     |     |RESET|     |     |     |     |     |     | PgUp|     |
+|-----------------------------------------------------------------------------------------+
+|      |       |       |                                   |     |      | Home| PgDn| End |
+`-----------------------------------------------------------------------------------------'
+```
+

keyboards/dz60/keymaps/boris_burger/config.h

@@ -0,0 +1 @@
+#define GRAVE_ESC_GUI_OVERRIDE    # Always send Escape if GUI is pressed

keyboards/dz60/keymaps/boris_burger/keymap.c

@@ -0,0 +1,87 @@
+#include QMK_KEYBOARD_H
+
+/* Holds state of modifiers when Backspace was pressed.
+ * Used to ensure that the correct keycode is unregistered when Backspace is released.
+ */
+static uint8_t bspc_mods = 0;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Qwerty
+    * ,-----------------------------------------------------------------------------------------.
+    * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+    * |-----------------------------------------------------------------------------------------+
+    * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+    * |-----------------------------------------------------------------------------------------+
+    * |   Fn    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+    * |-----------------------------------------------------------------------------------------+
+    * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | Ins |
+    * |-----------------------------------------------------------------------------------------+
+    * | Ctrl |  Win  |  Alt  |              Space                | Alt | Menu |  L  |  D  |  R  |
+    * `-----------------------------------------------------------------------------------------'
+    */
+    LAYOUT_directional(
+        KC_GESC, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , _______, KC_BSPC,
+        KC_TAB ,          KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS,
+        MO(1)  ,          KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,
+        KC_LSFT,          KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_UP  , KC_INS ,
+        KC_LCTL, KC_LGUI,          KC_LALT, KC_SPC ,          KC_SPC ,          KC_SPC ,          KC_RALT, KC_RGUI, KC_LEFT, KC_DOWN, KC_RIGHT
+    ),
+
+    /* FN Layer
+    * ,-----------------------------------------------------------------------------------------.
+    * |  `  |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
+    * |-----------------------------------------------------------------------------------------+
+    * |        |RBB T|RGB M| Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |     |      |     |       |
+    * |-----------------------------------------------------------------------------------------+
+    * |         | BL T| BL M| BL+ | BL- |     |     |     |     |     |     |     |             |
+    * |-----------------------------------------------------------------------------------------+
+    * |           |     |     |     |     |RESET|     |     |     |     |     |     | PgUp|     |
+    * |-----------------------------------------------------------------------------------------+
+    * |      |       |       |                                   |     |      | Home| PgDn| End |
+    * `-----------------------------------------------------------------------------------------'
+    */
+    LAYOUT_directional(
+        KC_GRV , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , _______, KC_DEL ,
+        _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+        _______,          BL_TOGG, BL_STEP, BL_INC , BL_DEC , _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, RESET  , _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+        _______, _______,          _______, _______,          _______,          _______,          _______, _______, KC_HOME, KC_PGDN, KC_END
+        ),
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch(keycode) {
+        case KC_BSPC: {
+            if (record->event.pressed) {
+                const uint8_t current_mods = get_mods();
+                const uint8_t shift = current_mods & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT));
+                const uint8_t ctrl = current_mods & (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTL));
+                bspc_mods = current_mods;
+                if(shift || ctrl) {
+                    add_key(KC_DEL);
+                    add_mods(current_mods);
+                    send_keyboard_report();
+                } else {
+                    return true;
+                }
+            }
+            else {
+                if(bspc_mods & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTL))) {
+                    // if Shift or Ctrl was pressed with Backspace, than that was intepreted as Del, so we need
+                    // to unregister the Del key 
+                    del_key(KC_DEL);
+                } else {
+                    // Either Backspace was pressed without mods, or with a modifier other than Shift or Ctrl
+                    // so it is simply taken as Backspace
+                    del_key(KC_BSPC);
+                }
+                send_keyboard_report();
+            }
+            return false;
+        }
+        default:
+            return true;
+    }
+}

keyboards/dz60/keymaps/crd/keymap.c

@@ -0,0 +1,70 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+   * |-----------------------------------------------------------------------------------------+
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+   * |-----------------------------------------------------------------------------------------+
+   * | Ctrl/Esc|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+   * |-----------------------------------------------------------------------------------------+
+   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | DEL |
+   * |-----------------------------------------------------------------------------------------+
+   * | FN2  |  Alt  |  Cmd  |              Space                | Cmd  | FN1 |  L  |  D  |  R  |
+   * `-----------------------------------------------------------------------------------------'
+   */
+
+  LAYOUT_directional(
+      KC_GESC,       KC_1,    KC_2,    KC_3,   KC_4,   KC_5,   KC_6,    KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  _______, KC_BSPC,
+      KC_TAB,        KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,   KC_Y,    KC_U,  KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+      CTL_T(KC_ESC), KC_A,    KC_S,    KC_D,   KC_F,   KC_G,   KC_H,    KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+      KC_LSFT,       KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,    KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_DEL,
+      MO(2),         KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT
+      ),
+
+  /* FN1 Layer
+   * ,-----------------------------------------------------------------------------------------.
+   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |           |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |     |     |     |     |     |     |     |     |     |     |      |      |      |
+   * |-----------------------------------------------------------------------------------------+
+   * |         |     |     |     |     |     |     |     |     |     |     |     |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |     |     |     |     |     |     |     |     |     |     |     |PgUp |     |
+   * |-----------------------------------------------------------------------------------------+
+   * |      |       |       |                                   |     |      |Home |PgDn | End |
+   * `-----------------------------------------------------------------------------------------'
+   */
+
+  LAYOUT_directional(
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDOWN, KC_END
+      ),
+
+  /* FN2 Layer (Media)
+   * ,-----------------------------------------------------------------------------------------.
+   * |     |     |     |     |     |     |     |     |     |     |     |     |     |   RESET   |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |RBB T|RGB M| Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |     |      |      |      |
+   * |-----------------------------------------------------------------------------------------+
+   * |         |     |     |     |     |     |     |     |     |     |     |     |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |     |     |     |     |     |     |     |     |     |     |Pl/Ps|Vol+ |Mute |
+   * |-----------------------------------------------------------------------------------------+
+   * |      |       |       |                                   |     |      |Prev |Vol- |Next |
+   * `-----------------------------------------------------------------------------------------'
+   */
+
+  LAYOUT_directional(
+      KC_SLEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+      _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE,
+      _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT
+      ),
+};

keyboards/dz60/keymaps/dbroqua/keymap.c

@@ -64,7 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *         |       |       |                                 |       |       |
  *         `-----------------------------------------------------------------'
  */
-  [_SFX] = LAYOUT_hhkb(
+  [_SFX] = LAYOUT_true_hhkb(
       ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
       ______,   BL_TOGG,BL_STEP,BL_DEC, BL_INC, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
       ______,   RGB_TOG,RGB_MOD,______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \

keyboards/dz60/keymaps/default/keymap.c

@@ -1,11 +1,9 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 	LAYOUT(
-		F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
 		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
@@ -25,37 +23,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/dz60/keymaps/eric/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Layer 0
@@ -56,37 +54,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
 		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0] = ACTION_FUNCTION(SHIFT_ESC)
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-		shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-		if (record->event.pressed) {
-			if (shift_esc_shift_mask) {
-			  add_key(KC_GRV);
-			  send_keyboard_report();
-			} else {
-			  add_key(KC_ESC);
-			  send_keyboard_report();
-			}
-		} else {
-			if (shift_esc_shift_mask) {
-			  del_key(KC_GRV);
-			  send_keyboard_report();
-			} else {
-			  del_key(KC_ESC);
-			  send_keyboard_report();
-			}
-		}
-		break;
-  }
-}

keyboards/dz60/keymaps/f3d3/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Layer 0
@@ -18,7 +16,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * `-----------------------------------------------------------------------------------------'
 */
 
-	LAYOUT_2_shifts(
+	LAYOUT_all(
 		KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,  KC_5,    KC_6,    KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,   KC_GRV,   KC_BSPC,
 		KC_TAB,           KC_Q,    KC_W,   KC_E,  KC_R,    KC_T,    KC_Y,  KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC,  KC_RBRC, KC_BSLS,
 		KC_CAPS,          KC_A,    KC_S,   KC_D,  KC_F,    KC_G,    KC_H,  KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT,  KC_ENT,
@@ -42,44 +40,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 */
 
 
-  LAYOUT_2_shifts(
+  LAYOUT_all(
 		KC_PWR,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS,  KC_DEL,
 		KC_TRNS,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  RESET,
 		KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MSTP, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/dz60/keymaps/frogger/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 #define ______ KC_TRNS
 
 #define LAYER_1 1
@@ -24,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-----------------------------------------------------------------------------------------'
    */
 
-  LAYOUT_2_shifts(
+  LAYOUT_all(
       KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, ______, KC_BSPC,
 
       KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
@@ -52,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    KC_MPRV, KC_MPLY, KC_MNXT,
    */
 
-  LAYOUT_2_shifts(
+  LAYOUT_all(
       KC_ESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, KC_F11, KC_F12, ______, KC_DEL,
 
       ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, ______, ______, KC_UP, ______, ______, ______, ______, ______,
@@ -78,7 +76,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-----------------------------------------------------------------------------------------'
    */
 
-  LAYOUT_2_shifts(
+  LAYOUT_all(
       RESET, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, KC_F11, KC_F12, ______, RESET,
 
       ______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, ______, ______, ______, ______, ______,

keyboards/dz60/keymaps/hailbreno/keymap.c

@@ -44,7 +44,7 @@ enum keycodes {
  * |      |      |      |             |      |                 |     |     |     |     |     |
  * `-----------------------------------------------------------------------------------------'
 
- [LAYOUT] = LAYOUT_2_shifts(
+ [LAYOUT] = LAYOUT_all(
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______,      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,              _______,
@@ -67,7 +67,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Ctrl | Alt  | Gui  |  Backspace  | Fn2  |      Space      | Alt | App | Left| Down|Right|
  * `-----------------------------------------------------------------------------------------'
  */
-[_QWERTY] = LAYOUT_2_shifts(
+[_QWERTY] = LAYOUT_all(
   KC_ESC,          KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,  KC_0,  KC_MINS,  KC_EQL,  KC_BSLS, KC_GRV,
   KC_TAB,             KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,  KC_LBRC,  KC_RBRC,       KC_DEL,
   LT(_FUNC,KC_CAPS),   KC_A,  KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K,  KC_L,  KC_SCLN,  KC_QUOT,             KC_ENT,
@@ -87,7 +87,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Ctrl | Alt  | Gui  |  Backspace  | Fn2  |      Space      | Alt | App | Left| Down|Right|
  * `-----------------------------------------------------------------------------------------'
  */
-[_COLEMAK] = LAYOUT_2_shifts(
+[_COLEMAK] = LAYOUT_all(
   KC_ESC,          KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,  KC_0,  KC_MINS,  KC_EQL,  KC_BSLS, KC_GRV,
   KC_TAB,             KC_Q,  KC_W,  KC_F,  KC_P,  KC_G,  KC_J,  KC_L,  KC_U,  KC_Y,  KC_SCLN,  KC_LBRC,  KC_RBRC,    KC_DEL,
   LT(_FUNC,KC_CAPS),   KC_A,  KC_R,  KC_S,  KC_T,  KC_D,  KC_H,  KC_N,  KC_E,  KC_I,  KC_O,  KC_QUOT,                KC_ENT,
@@ -107,7 +107,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Ctrl | Alt  | Gui  |  Backspace  | Fn2  |      Space      | Alt | App | Left| Down|Right|
  * `-----------------------------------------------------------------------------------------'
  */
-[_DVORAK] = LAYOUT_2_shifts(
+[_DVORAK] = LAYOUT_all(
   KC_ESC,         KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,  KC_0,  KC_LBRC,  KC_RBRC,  KC_BSLS, KC_GRV,
   KC_TAB,          KC_QUOTE,  KC_COMM,  KC_DOT,  KC_P,  KC_Y,  KC_F,  KC_G,  KC_C,  KC_R,  KC_L,  KC_SLSH,  KC_EQL,  KC_DEL,
   LT(_FUNC,KC_CAPS),   KC_A,  KC_O,  KC_E,  KC_U,  KC_I,  KC_D,  KC_H,  KC_T,  KC_N,  KC_S,  KC_MINS,                KC_ENT,
@@ -127,7 +127,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |             |      |                 |     |     | Home| PgDn| End |
  * `-----------------------------------------------------------------------------------------'
  */
-[_FUNC] = LAYOUT_2_shifts(
+[_FUNC] = LAYOUT_all(
   _______,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, KC_PSCR,  KC_INS,
   _______,          _______, _______, _______, _______, _______, _______, KC_PGUP,   KC_UP, KC_PGDN, KC_CIRC, _______, _______, KC_BSPC,
   _______,      _______, _______, _______, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_TILD,              _______,
@@ -147,7 +147,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |             |      |                 |     |     |     |     |     |
  * `-----------------------------------------------------------------------------------------'
  */
-[_FUNC2] = LAYOUT_2_shifts(
+[_FUNC2] = LAYOUT_all(
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______,      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,              _______,
@@ -167,7 +167,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |             |      |                 |     |     |     |     |     |
  * `-----------------------------------------------------------------------------------------'
  */
-[_RGB] = LAYOUT_2_shifts(
+[_RGB] = LAYOUT_all(
   _______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, _______, _______, _______, _______, _______, _______,
   _______,          RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______,      RGB_HUD, RGB_VAD, RGB_HUI, _______, _______, _______, _______, _______, _______, _______, _______,              _______,
@@ -187,7 +187,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |           |      |                |     |     |Qwerty|Colemk|Dvorak|
  * `-----------------------------------------------------------------------------------------'
  */
-[_ADJUST] = LAYOUT_2_shifts(
+[_ADJUST] = LAYOUT_all(
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   RESET,
   _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______,      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,              _______,

keyboards/dz60/keymaps/iso_6u_space/keymap.c

@@ -1,74 +1,44 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * _______ can be used in place of KC_TRNS (transparent) *
+ * XXXXXXX can be used in place of KC_NO (No Operation)  *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* ISO 6u layout layer 0
-* ,-----------------------------------------------------------------------------------------.
-* | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  ß  |  ´  |   BSPC    |
-* |-----------------------------------------------------------------------------------------+
-* | Tab    |  Q  |  W  |  E  |  R  |  T  |  Z  |  U  |  I  |  O  |  P  |  P  |  Ü  | *  |   |
-* |-------------------------------------------------------------------------------------|   +
-* | Layer_1    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  Ö  |  Ä |  # |Enter |
-* |-----------------------------------------------------------------------------------------+
-* | Shift|  < |  Y  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  .  |  -  |  RShift   |
-* |-----------------------------------------------------------------------------------------+
-* | LCtrl |  LGUI  |  LAlt  |          Space           |  RAlt  |  RGUI  | Layer_2 |  RCtrl |
-* `-----------------------------------------------------------------------------------------'
-*/
-	LAYOUT(
-		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
-		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
-    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT,KC_RGUI, KC_NO, MO(2), KC_RCTL),
+  /* ISO 6u layout layer 0 (UK Layout shown)
+   * ,-----------------------------------------------------------.
+   * |Esc|1 !|2 "|3 £|4 $|5 %|6 ^|7 &|8 *|9 (|0 )|- _|= +| Bksp  |
+   * |-----------------------------------------------------------|
+   * | Tab | Q | W | E | R | T | Y | U | I | O | P |[ {|] }|Enter|
+   * |------------------------------------------------------.    |
+   * | Fn1  | A | S | D | F | G | H | J | K | L |; :|' @|# ~|    |
+   * |-----------------------------------------------------------|
+   * |Sft |\ || Z | X | C | V | B | N | M |, <|. >|/ ?|  Shift   |
+   * |-----------------------------------------------------------|
+   * |Ctrl |GUI|Alt  |         Space         |Alt  |GUI|Fn2|Ctrl |
+   * `-----------------------------------------------------------'
+   */
+  [0] = LAYOUT_60_iso(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(2),   KC_RCTL),
 
 
-	LAYOUT(
-		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL,
-		KC_NO, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_LSFT, KC_NO, KC_NO, KC_NO, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_LCTL, KC_LGUI, KC_LGUI, KC_NO, KC_NO, KC_NO, KC_RALT, KC_RGUI, KC_NO, KC_NO, KC_RCTL),
+  [1] = LAYOUT_60_iso(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+    XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LCTL, KC_LGUI, KC_LGUI,                            XXXXXXX,                            KC_RALT, KC_RGUI, _______, KC_RCTL),
+
+  [2] = LAYOUT_60_iso(
+    KC_GRV,  KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL,
+    XXXXXXX, XXXXXXX, KC_UP,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LCTL, KC_LGUI, KC_LALT,                            XXXXXXX,                            XXXXXXX, XXXXXXX, _______, XXXXXXX),
 
-	LAYOUT(
-		KC_GRV,  KC_MPRV,   KC_MPLY,  KC_MNXT, M(4), M(5), M(6), M(7), M(8), M(9), M(10), M(11), M(12), KC_NO, KC_DEL,
-		KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-        send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/dz60/keymaps/iso_7u_space/keymap.c

@@ -1,76 +1,47 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * _______ can be used in place of KC_TRNS (transparent) *
+ * XXXXXXX can be used in place of KC_NO (No Operation)  *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-/* ISO 7u layout layer 0
-* ,-----------------------------------------------------------------------------------------.
-* | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  ß  |  ´  |   BSPC    |
-* |-----------------------------------------------------------------------------------------+
-* | Tab    |  Q  |  W  |  E  |  R  |  T  |  Z  |  U  |  I  |  O  |  P  |  P  |  Ü  | *  |   |
-* |-------------------------------------------------------------------------------------|   +
-* | Layer_1    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  Ö  |  Ä |  # |Enter |
-* |-----------------------------------------------------------------------------------------+
-* | Shift|  < |  Y  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  .  |  -  |  RShift   |
-* |-----------------------------------------------------------------------------------------+
-* | LCtrl |  LGUI  |  LAlt  |               Space                | RAlt  | Layer_2 |  RCtrl |
-* `-----------------------------------------------------------------------------------------'
-*/
+  /* ISO 7u layout layer 0
+   * ,-----------------------------------------------------------.
+   * |Esc|1 !|2 "|3 £|4 $|5 %|6 ^|7 &|8 *|9 (|0 )|- _|= +| Bksp  |
+   * |-----------------------------------------------------------|
+   * | Tab | Q | W | E | R | T | Y | U | I | O | P |[ {|] }|Enter|
+   * |------------------------------------------------------.    |
+   * | Fn1  | A | S | D | F | G | H | J | K | L |; :|' @|# ~|    |
+   * |-----------------------------------------------------------|
+   * |Sft |\ || Z | X | C | V | B | N | M |, <|. >|/ ?|  Shift   |
+   * |-----------------------------------------------------------|
+   * |Ctrl |GUI|Alt  |           Space           |Alt  |Fn2|Ctrl |
+   * `-----------------------------------------------------------'
+   */
+  [0] = LAYOUT_60_iso(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             XXXXXXX, KC_RALT, MO(2),   KC_RCTL
+  ),
 
-	LAYOUT(
-		KC_ESC,   KC_1,       KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7, 	KC_8, 		KC_9,		KC_0, 		KC_MINS, KC_EQL, 	KC_NO, 	KC_BSPC,
-		KC_TAB,   KC_Q,       KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U, 	KC_I, 		KC_O,		KC_P, 		KC_LBRC, KC_RBRC, 	KC_BSLS,
-		MO(1),    KC_A,       KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J, 	KC_K, 		KC_L, 		KC_SCLN, 	KC_QUOT, KC_ENT,
-		KC_LSFT,  KC_NUBS,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N, 	KC_M, 		KC_COMM, 	KC_DOT, 	KC_SLSH, KC_RSFT,
-    	KC_LCTL,  KC_LCTL,    KC_LGUI,  KC_LALT,  KC_SPC,   KC_SPC,   KC_SPC,   KC_NO,	KC_RALT, 	KC_NO, 		MO(2), 		KC_RCTL),
+  [1] = LAYOUT_60_iso(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+    XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_PGUP, XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_PGDN, KC_LGUI, KC_LGUI,                            XXXXXXX,                            XXXXXXX, KC_RGUI, _______, KC_RCTL
+  ),
 
+  [2] = LAYOUT_60_iso(
+    KC_GRV,  KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL,
+    XXXXXXX, XXXXXXX, KC_UP,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LCTL, KC_LGUI, KC_LALT,                            XXXXXXX,                            XXXXXXX, XXXXXXX, _______, XXXXXXX
+  ),
 
-	LAYOUT(
-		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL,
-		KC_NO, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_PGUP, KC_NO, KC_NO, KC_NO, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_PGDOWN, KC_LGUI, KC_LGUI, KC_NO, KC_NO, KC_NO, KC_RALT, KC_RGUI, KC_NO, KC_NO, KC_RCTL),
-
-	LAYOUT(
-		KC_GRV,  KC_MPRV,   KC_MPLY,  KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL,
-		KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-		KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-        send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/dz60/keymaps/iso_uk/keymap.c

@@ -18,8 +18,6 @@
 #define MO_FN MO(1)
 #define MO_FN MO(1)
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_QWERTY] = LAYOUT_60_iso(
@@ -50,37 +48,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/dz60/keymaps/iso_vim_arrow/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* ISO 5x1u layout (ISO German keyboard layout shown)
@@ -23,8 +21,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
   LAYOUT_60_iso_5x1u(
     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_ENT,
-    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
     KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
     KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
   ),
@@ -32,44 +30,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   LAYOUT_60_iso_5x1u(
     KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
-    KC_NO,   KC_NO,   KC_NO,   KC_NO,   RESET,   KC_NO,   KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_PSCR, KC_NO,   KC_NO,   KC_NO,
-    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_END,  KC_DEL,  KC_NO,
+    KC_NO,   KC_NO,   KC_NO,   KC_NO,   RESET,   KC_NO,   KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_PSCR, KC_NO,   KC_NO,
+    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_END,  KC_DEL,  KC_NO,   KC_NO,
     KC_LSFT, BL_TOGG, KC_APP,  KC_PAUS, KC_INS,  KC_NO,   KC_MPLY, KC_MSTP, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,   KC_RSFT,
     KC_LCTL, KC_LGUI, KC_LALT,                   KC_BSPC,                            KC_DEL,  KC_HOME, KC_PGDN, KC_PGUP, KC_END
   ),
 
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}