adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support (#4462)

* add initial support for hadron ver3

* add initial support for hadron ver3

* pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display

* initial work on OLED using qwiic driver

* early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality

* moved oled defines to config.h and added ifndef to micro_oled driver

* WORKING :D - note, still work in progress to get the start location correct on the 128x32 display.

* added equation to automatically calculate display offset based on screen width

* adding time-out timer to oled display

* changed read lock staus via read_led_state

* lock indications fixes

* Added scroll lock indication to oled

* add support for DRV2605 haptic driver

* Improve readabiity of DRV2605 driver.
-added typedef for waveform library
-added unions for registers

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Fixes for PR

* PR fixes

* fix old persistent layer function to use new set_single_persistent_default_layer

* fix issues with changing makefile defines that broken per-key haptic pulse

* Comment fixes

* Add definable parameter and auto-calibration based on motor choice

Vagrantfile

@@ -59,7 +59,7 @@ Vagrant.configure(2) do |config|
   # add a # before ,args: and run 'vagrant up' to get a working
   # non-updated box and then attempt to troubleshoot or open a Github issue
 
-  config.vm.provision "shell", run: "always", path: "./util/install_dependencies.sh", args: "-update"
+  config.vm.provision "shell", run: "always", path: "./util/qmk_install.sh", args: "-update"
 
   config.vm.post_up_message = <<-EOT
 

common_features.mk

@@ -213,12 +213,25 @@ endif
 ifeq ($(strip $(TERMINAL_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c
     OPT_DEFS += -DTERMINAL_ENABLE
+    OPT_DEFS += -DUSER_PRINT
 endif
 
 ifeq ($(strip $(USB_HID_ENABLE)), yes)
     include $(TMK_DIR)/protocol/usb_hid.mk
 endif
 
+ifeq ($(strip $(ENCODER_ENABLE)), yes)
+    SRC += $(QUANTUM_DIR)/encoder.c
+    OPT_DEFS += -DENCODER_ENABLE
+endif
+
+ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L)
+    COMMON_VPATH += $(DRIVER_PATH)/haptic
+    SRC += DRV2605L.c
+    SRC += i2c_master.c
+    OPT_DEFS += -DDRV2605L
+endif
+
 ifeq ($(strip $(HD44780_ENABLE)), yes)
     SRC += drivers/avr/hd44780.c
     OPT_DEFS += -DHD44780_ENABLE
@@ -234,12 +247,14 @@ ifeq ($(strip $(LEADER_ENABLE)), yes)
   OPT_DEFS += -DLEADER_ENABLE
 endif
 
+include $(DRIVER_PATH)/qwiic/qwiic.mk
+
 QUANTUM_SRC:= \
     $(QUANTUM_DIR)/quantum.c \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
 
-ifndef CUSTOM_MATRIX
+ifneq ($(strip $(CUSTOM_MATRIX)), yes)
     ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
         QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
     else

docs/LANGS.md

@@ -0,0 +1,4 @@
+# Languages
+
+* [English](/)
+* [Chinese](zh/)

docs/_sidebar.md

@@ -3,6 +3,7 @@
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
+  * [Best Practices](newbs_best_practices.md)
   * [Learning Resources](newbs_learn_more_resources.md)
 
 * [QMK Basics](README.md)
@@ -38,6 +39,7 @@
   * [Glossary](reference_glossary.md)
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
+  * [Configurator Support](reference_configurator_support.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)
@@ -51,6 +53,7 @@
   * [Combos](feature_combo)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
+  * [Encoders](feature_encoders.md)
   * [Grave Escape](feature_grave_esc.md)
   * [Key Lock](feature_key_lock.md)
   * [Layouts](feature_layouts.md)
@@ -77,6 +80,7 @@
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
+  * [I2C Driver](i2c_driver.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/_summary.md

@@ -3,6 +3,8 @@
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
+  * [Best Practices](newbs_best_practices.md)
+  * [Learning Resources](newbs_learn_more_resources.md)
 
 * [QMK Basics](README.md)
   * [QMK Introduction](getting_started_introduction.md)
@@ -37,6 +39,7 @@
   * [Glossary](reference_glossary.md)
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
+  * [Configurator Support](reference_configurator_support.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)
@@ -50,6 +53,7 @@
   * [Combos](feature_combo)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
+  * [Encoders](feature_encoders.md)
   * [Grave Escape](feature_grave_esc.md)
   * [Key Lock](feature_key_lock.md)
   * [Layouts](feature_layouts.md)
@@ -76,6 +80,7 @@
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
+  * [I2C Driver](i2c_driver.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/config_options.md

@@ -132,14 +132,15 @@ If you define these options you will enable the associated feature, which may in
 * `#define TAPPING_TOGGLE 2`
   * how many taps before triggering the toggle
 * `#define PERMISSIVE_HOLD`
-  * makes tap and hold keys work better for fast typers who don't want tapping term set above 500
+  * makes tap and hold keys trigger the hold if another key is pressed before releasing, even if it hasn't hit the `TAPPING_TERM`
   * See [Permissive Hold](feature_advanced_keycodes.md#permissive-hold) for details
 * `#define IGNORE_MOD_TAP_INTERRUPT`
-  * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold
-  * See [Mod tap interrupt](feature_advanced_keycodes.md#mod-tap-interrupt) for details
+  * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the `TAPPING_TERM` for both keys.
+  * See [Mod tap interrupt](feature_advanced_keycodes.md#ignore-mod-tap-interrupt) for details
 * `#define TAPPING_FORCE_HOLD`
   * makes it possible to use a dual role key as modifier shortly after having been tapped
-  * See [Hold after tap](feature_advanced_keycodes.md#hold-after-tap)
+  * See [Hold after tap](feature_advanced_keycodes.md#tapping-force-hold)
+  * Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle)
 * `#define LEADER_TIMEOUT 300`
   * how long before the leader key times out
 * `#define ONESHOT_TIMEOUT 300`
@@ -260,3 +261,32 @@ Use these to enable or disable building certain features. The more you have enab
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
+
+## USB Endpoint Limitations
+
+In order to provide services over USB, QMK has to use USB endpoints.
+These are a finite resource: each microcontroller has only a certain number.
+This limits what features can be enabled together.
+If the available endpoints are exceeded, a build error is thrown.
+
+The following features can require separate endpoints:
+
+* `MOUSEKEY_ENABLE`
+* `EXTRAKEY_ENABLE`
+* `CONSOLE_ENABLE`
+* `NKRO_ENABLE`
+* `MIDI_ENABLE`
+* `RAW_ENABLE`
+* `VIRTSER_ENABLE`
+
+In order to improve utilisation of the endpoints, the HID features can be combined to use a single endpoint.
+By default, `MOUSEKEY`, `EXTRAKEY`, and `NKRO` are combined into a single endpoint.
+
+The base keyboard functionality can also be combined into the endpoint,
+by setting `KEYBOARD_SHARED_EP = yes`.
+This frees up one more endpoint,
+but it can prevent the keyboard working in some BIOSes,
+as they do not implement Boot Keyboard protocol switching.
+
+Combining the mouse also breaks Boot Mouse compatibility.
+The mouse can be uncombined by setting `MOUSE_SHARED_EP = no` if this functionality is required.

docs/faq_build.md

@@ -17,7 +17,7 @@ or just:
 
 Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
 
-## Linux `udev` Rules
+### Linux `udev` Rules
 On Linux, you'll need proper privileges to access the MCU. You can either use
 `sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
 
@@ -37,6 +37,14 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
 
+## Unknown Device for DFU Bootloader
+
+If you're using Windows to flash your keyboard, and you are running into issues, check the Device Manager.  If you see an "Unknown Device" when the keyboard is in "bootloader mode", then you may have a driver issue. 
+
+Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue. 
+
+If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUS(libusb-1.0)` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again. 
+
 ## WINAVR is Obsolete
 It is no longer recommended and may cause some problem.
 See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
@@ -97,10 +105,12 @@ The solution is to remove and reinstall all affected modules.
 ```
 brew rm avr-gcc
 brew rm dfu-programmer
+brew rm dfu-util
 brew rm gcc-arm-none-eabi
 brew rm avrdude
 brew install avr-gcc
 brew install dfu-programmer
+brew install dfu-util
 brew install gcc-arm-none-eabi
 brew install avrdude
 ```
@@ -116,5 +126,5 @@ For now, you need to rollback avr-gcc to 7 in brew.
 ```
 brew uninstall --force avr-gcc
 brew install avr-gcc@7
-brew link avr-gcc@7
+brew link --force avr-gcc@7
 ```

docs/faq_keymap.md

@@ -11,8 +11,8 @@ Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_f
 
 There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JIS. North America primarily uses ANSI, Europe and Africa primarily use ISO, and Japan uses JIS. Regions not mentioned typically use either ANSI or ISO. The keycodes corresponding to these layouts are shown here:
 
-<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/070a530eedaed36a2d77f3f6fd455677 -->
-![Keyboard Layout Image](https://i.imgur.com/gvlNUpQ.png)
+<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/bf431647d1001cff5eff20ae55621e9a -->
+![Keyboard Layout Image](https://i.imgur.com/5wsh5wM.png)
 
 ## Some Of My Keys Are Swapped Or Not Working
 
@@ -211,20 +211,3 @@ here real_mods lost state for 'physical left shift'.
 
 weak_mods is ORed with real_mods when keyboard report is sent.
 https://github.com/tmk/tmk_core/blob/master/common/action_util.c#L57
-
-## Timer Functionality
-
-It's possible to start timers and read values for time-specific events - here's an example:
-
-```c
-static uint16_t key_timer;
-key_timer = timer_read();
-
-if (timer_elapsed(key_timer) < 100) {
-  // do something if less than 100ms have passed
-} else {
-  // do something if 100ms or more have passed
-}
-```
-
-It's best to declare the `static uint16_t key_timer;` at the top of the file, outside of any code blocks you're using it in.

docs/feature_advanced_keycodes.md

@@ -2,7 +2,7 @@
 
 Your keymap can include keycodes that are more advanced than normal, for example keys that switch layers or send modifiers when held, but send regular keycodes when tapped. This page documents the functions that are available to you.
 
-### Assigning Custom Names
+## Assigning Custom Names
 
 People often define custom names using `#define`. For example:
 
@@ -13,7 +13,7 @@ People often define custom names using `#define`. For example:
 
 This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping it more readable.
 
-### Caveats
+## Caveats
 
 Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored.
 
@@ -36,7 +36,7 @@ These functions allow you to activate layers in various ways. Note that layers a
 
 Care must be taken when switching layers, it's possible to lock yourself into a layer with no way to deactivate that layer (without unplugging your keyboard.) We've created some guidelines to help users avoid the most common problems.
 
-### Beginners
+## Beginners
 
 If you are just getting started with QMK you will want to keep everything simple. Follow these guidelines when setting up your layers:
 
@@ -44,11 +44,11 @@ If you are just getting started with QMK you will want to keep everything simple
 * Arrange your layers in a "tree" layout, with layer 0 as the root. Do not try to enter the same layer from more than one other layer.
 * In a layer's keymap, only reference higher-numbered layers. Because layers are processed from the highest-numbered (topmost) active layer down, modifying the state of lower layers can be tricky and error-prone.
 
-### Intermediate Users
+## Intermediate Users
 
 Sometimes you need more than one base layer. For example, if you want to switch between QWERTY and Dvorak, switch between layouts for different countries, or switch your layout for different videogames. Your base layers should always be the lowest numbered layers. When you have multiple base layers you should always treat them as mutually exclusive. When one base layer is on the others are off.
 
-### Advanced Users
+## Advanced Users
 
 Once you have a good feel for how layers work and what you can do, you can get more creative. The rules listed in the beginner section will help you be successful by avoiding some of the tricker details but they can be constraining, especially for ultra-compact keyboard users. Understanding how layers work will allow you to use them in more advanced ways.
 
@@ -73,7 +73,6 @@ These allow you to combine a modifier with a keycode. When pressed, the keydown
 |`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
 |`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
 |`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`ALTG(kc)`|                      |Hold Right Control and Alt and press `kc`           |
 |`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
 |`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
 
@@ -126,6 +125,14 @@ For convenience, QMK includes some Mod-Tap shortcuts to make common combinations
 |`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
 
+## Caveats
+
+Unfortunately, these keycodes cannot be used in Mod-Taps or Layer-Taps, since any modifiers specified in the keycode are ignored.
+
+Additionally, you may run into issues when using Remote Desktop Connection on Windows. Because these codes send shift very fast, Remote Desktop may miss the codes.
+
+To fix this, open Remote Desktop Connection, click on "Show Options", open the the "Local Resources" tab. In the keyboard section, change the drop down to "On this Computer". This will fix the issue, and allow the characters to work correctly.
+
 # One Shot Keys
 
 One shot keys are keys that remain active until the next key is pressed, and then are released. This allows you to type keyboard combinations without pressing more than one key at a time. These keys are usually called "Sticky keys" or "Dead keys".
@@ -134,6 +141,8 @@ For example, if you define a key as `OSM(MOD_LSFT)`, you can type a capital A ch
 
 One shot keys also work as normal modifiers. If you hold down a one shot key and type other keys, your one shot will be released immediately after you let go of the key.
 
+Additionally, hitting keys five times in a short period will lock that key. This applies for both One Shot Modifiers and One Shot Layers, and is controlled by the `ONESHOT_TAP_TOGGLE` define.
+
 You can control the behavior of one shot keys by defining these in `config.h`:
 
 ```c
@@ -144,42 +153,73 @@ You can control the behavior of one shot keys by defining these in `config.h`:
 * `OSM(mod)` - Momentarily hold down *mod*. You must use the `MOD_*` keycodes as shown in [Mod Tap](#mod-tap), not the `KC_*` codes.
 * `OSL(layer)` - momentary switch to *layer*.
 
-Sometimes, you want to activate a one-shot layer as part of a macro or tap dance routine. To do this, you need to call `set_oneshot_layer(LAYER, ONESHOT_START)` on key down, and `set_oneshot_layer(ONESHOT_PRESSED)` on key up. If you want to cancel the oneshot, call `reset_oneshot_layer()`. For more complicated actions, take a look at the oneshot implementation in [`process_record`](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action.c#L429).
+Sometimes, you want to activate a one-shot key as part of a macro or tap dance routine.  
+
+For one shot layers, you need to call `set_oneshot_layer(LAYER, ONESHOT_START)` on key down, and `set_oneshot_layer(ONESHOT_PRESSED)` on key up. If you want to cancel the oneshot, call `reset_oneshot_layer()`.
+
+For one shot mods, you need to call `set_oneshot_mods(MOD)` to set it, or `clear_oneshot_mods()` to cancel it.
+
+!> If you're having issues with OSM translating over Remote Desktop Connection, this can be fixed by opening the settings, going to the "Local Resources" tap, and in the keyboard section, change the drop down to "On this Computer".  This will fix the issue and allow OSM to function properly over Remote Desktop.
 
-If you're having issues with OSM translating over Remote Desktop Connection, this can be fixed by opening the settings, going to the "Local Resources" tap, and in the keyboard section, change the drop down to "On this Computer".  This will fix the issue and allow OSM to function properly over Remote Desktop.
 
 # Permissive Hold
 
 As of [PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/), there is a new `config.h` option:
 
-```
+```c
 #define PERMISSIVE_HOLD
 ```
 
-This makes it easier for fast typists to use dual-function keys. Without this, if you let go of a held key inside the tapping term, it won't register.
+This makes tap and hold keys (like Mod Tap) work better for fast typist, or for high `TAPPING_TERM` settings. 
 
-Example: (Tapping Term = 200ms)
+If you press a Mod Tap key, tap another key (press and release) and then release the Mod Tap key, all within the tapping term, it will output the "tapping" function for both keys.
 
-- SHFT_T(KC_A) Down
-- KC_X Down
-- KC_X Up
-- SHFT_T(KC_A) Up
+For Instance:
 
-With defaults, if above is typed within tapping term, this will emit `ax`. With permissive hold, if above is typed within tapping term, this will emit `X` (so, Shift+X).
+- `SHFT_T(KC_A)` Down
+- `KC_X` Down
+- `KC_X` Up
+- `SHFT_T(KC_A)` Up
 
-# Mod tap interrupt
+Normally, if you do all this within the `TAPPING_TERM` (default: 200ms) this will be registered as `ax` by the firmware and host system. With permissive hold enabled, this modifies how this is handled by considering the Mod Tap keys as a Mod if another key is tapped, and would registered as `X` (`SHIFT`+`x`). 
 
-When a dual role key used for a modifier is quickly followed by another keys, it is interpreted as held even before the tapping term elapsed.  This is a problem if a key is used for example inside a rolling combo because the second key will be pressed before the first key is released.
+?> If you have `Ignore Mod Tap Interrupt` enabled, as well, this will modify how both work. The regular key has the modifier added if the first key is released first or if both keys are held longer than the `TAPPING_TERM`.
 
-For example, when trying to type the rolling combo "zx" and z being configured to send Ctrl when hold, z rapidly followed by x actually sends Ctrl-x. That's bad.
+# Ignore Mod Tap Interrupt
 
-You can disable this behavior by defining `IGNORE_MOD_TAP_INTERRUPT` in `config.h`.
+To enable this setting, add this to your `config.h`:
 
-Note that this only concerns modifiers and not layer switching keys.
+```c
+#define IGNORE_MOD_TAP_INTERRUPT
+```
 
-# Hold after tap
+Similar to Permissive Hold, this alters how the firmware processes input for fast typist. If you press a Mod Tap key, press another key, release the Mod Tap key, and then release the normal key, it would normally output the "tapping" function for both keys. This may not be desirable for rolling combo keys. 
 
-When the user holds a key after tap, this repeats the tapped key rather to hold a modifier key.  This allows to use auto repeat for the tapped key.  If you prefer to hold a modifier instead, define `TAPPING_FORCE_HOLD` in `config.h`.
+Setting `Ignore Mod Tap Interrupt` requires  holding both keys for the `TAPPING_TERM` to trigger the hold function (the mod).
+
+For Instance:
+
+- `SHFT_T(KC_A)` Down
+- `KC_X` Down
+- `SHFT_T(KC_A)` Up
+- `KC_X` Up
+
+Normally, this would send `X` (`SHIFT`+`x`). With `Ignore Mod Tap Interrupt` enabled, holding both keys are required for the `TAPPING_TERM` to register the hold action. A quick tap will output `ax` in this case, while a hold on both will still output `X`  (`SHIFT`+`x`).
+
+
+?> __Note__: This only concerns modifiers and not layer switching keys.
+
+?> If you have `Permissive Hold` enabled, as well, this will modify how both work. The regular key has the modifier added if the first key is released first or if both keys are held longer than the `TAPPING_TERM`.
+
+# Tapping Force Hold
+
+To enable `tapping force hold`, add the following to your `config.h`: 
+
+```c
+#define TAPPING_FORCE_HOLD
+```
+
+When the user holds a key after tap, this repeats the tapped key rather to hold a modifier key.  This allows to use auto repeat for the tapped key.  
 
 Example:
 
@@ -197,6 +237,12 @@ With `TAPPING_FORCE_HOLD`, the second press will be interpreted as a Shift, allo
 
 # Retro Tapping
 
-When you hold a dual function key, and haven't pressed anything when you release the key, normally nothing happens.  However, if you enable this, if you release the key without pressing another key, it will send the original key, even if it is outside of the tapping term. 
+To enable `retro tapping`, add the following to your `config.h`: 
 
-For instance, if you're using `LT(2, KC_SPACE)`, if you hold the key, don't hit anything else and then release it, normally, nothing happens. But with `RETRO_TAPPING` defined in your `config.h`, it will send `KC_SPACE`. 
+```c
+#define RETRO_TAPPING
+```
+
+Holding and releasing a dual function key without pressing another key will result in nothing happening. With retro tapping enabled, releasing the key without pressing another will send the original keycode even if it is outside the tapping term.
+
+For instance, holding and releasing `LT(2, KC_SPACE)` without hitting another key will result in nothing happening. With this enabled, it will send `KC_SPACE` instead.

docs/feature_audio.md

@@ -65,6 +65,13 @@ The available keycodes for audio are:
 * `AU_OFF` - Turn audio mode off
 * `AU_TOG` - Toggle audio mode
 
+## ARM Audio Volume
+
+For ARM devices, you can adjust the DAC sample values. If your board is too loud for you or your coworkers, you can set the max using `DAC_SAMPLE_MAX` in your `config.h`:
+
+```c
+#define DAC_SAMPLE_MAX 65535U
+```
 
 ## Music Mode
 

docs/feature_backlight.md

@@ -54,14 +54,17 @@ In this handler, the value of an incrementing counter is mapped onto a precomput
 
 ## Backlight Functions
 
-|Function  |Description                                               |
-|----------|----------------------------------------------------------|
-|`backlight_toggle()`   |Turn the backlight on or off                 |
-|`backlight_step()`     |Cycle through backlight levels               |
-|`backlight_increase()` |Increase the backlight level                 |
-|`backlight_decrease()` |Decrease the backlight level                 |
-|`backlight_level(x)`   |Sets the backlight level to specified level  |
-|`get_backlight_level()`|Toggle backlight breathing                   |
+|Function  |Description                                                |
+|----------|-----------------------------------------------------------|
+|`backlight_toggle()`    |Turn the backlight on or off                 |
+|`backlight_enable()`    |Turn the backlight on                        |
+|`backlight_disable()`   |Turn the backlight off                       |
+|`backlight_step()`      |Cycle through backlight levels               |
+|`backlight_increase()`  |Increase the backlight level                 |
+|`backlight_decrease()`  |Decrease the backlight level                 |
+|`backlight_level(x)`    |Sets the backlight level to specified level  |
+|`get_backlight_level()` |Return the current backlight level           |
+|`is_backlight_enabled()`|Return whether the backlight is currently on |
 
 ### Backlight Breathing Functions
 

docs/feature_bootmagic.md

@@ -11,7 +11,15 @@ There are three separate but related features that allow you to change the behav
 On some keyboards Bootmagic is disabled by default. If this is the case, it must be explicitly enabled in your `rules.mk` with:
 
 ```make
-BOOTMAGIC_ENABLE = yes
+BOOTMAGIC_ENABLE = full
+```
+
+?> You may see `yes` being used in place of `full`, and this is okay. However, `yes` is deprecated, and ideally `full` (or `lite`) should be used instead.
+
+Additionally, you can use [Bootmagic Lite](#bootmagic-lite) (a scaled down, very basic version of Bootmagic) by adding the following to your `rules.mk` file:
+
+```make
+BOOTMAGIC_ENABLE = lite
 ```
 
 ## Hotkeys
@@ -99,3 +107,45 @@ If you would like to change the hotkey assignments for Bootmagic, `#define` thes
 |`BOOTMAGIC_KEY_DEFAULT_LAYER_5`         |`KC_5`       |Make layer 5 the default layer                     |
 |`BOOTMAGIC_KEY_DEFAULT_LAYER_6`         |`KC_6`       |Make layer 6 the default layer                     |
 |`BOOTMAGIC_KEY_DEFAULT_LAYER_7`         |`KC_7`       |Make layer 7 the default layer                     |
+
+# Bootmagic Lite
+
+In addition to the full blown Bootmagic feature, is the Bootmagic Lite feature that only handles jumping into the bootloader.  This is great for boards that don't have a physical reset button but you need a way to jump into the bootloader, and don't want to deal with the headache that Bootmagic can cause.
+
+To enable this version of Bootmagic, you need to enable it in your `rules.mk` with:
+
+```make
+BOOTMAGIC_ENABLE = lite
+```
+
+Additionally, you may want to specify which key to use.  This is especially useful for keyboards that have unusual matrices.  To do so, you need to specify the row and column of the key that you want to use. Add these entries to your `config.h` file:
+
+```c
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 1
+```
+
+By default, these are set to 0 and 0, which is usually the "ESC" key on a majority of keyboards.
+
+And to trigger the bootloader, you hold this key down when plugging the keyboard in. Just the single key. 
+
+## Advanced Bootmagic Lite
+
+The `bootmagic_lite` function is defined weakly, so that you can replace this in your code, if you need.  A great example of this is the Zeal60 boards that have some additional handling needed.
+
+To replace the function, all you need to do is add something like this to your code:
+
+```c
+void bootmagic_lite(void) {
+    matrix_scan();
+    wait_ms(DEBOUNCING_DELAY * 2);
+    matrix_scan();
+
+    if (matrix_get_row(BOOTMAGIC_LITE_ROW) & (1 << BOOTMAGIC_LITE_COLUMN)) {
+      // Jump to bootloader.
+      bootloader_jump();
+    }
+}
+```
+
+You can additional feature here. For instance, resetting the eeprom or requiring additional keys to be pressed to trigger bootmagic.  Keep in mind that `bootmagic_lite` is called before a majority of features are initialized in the firmware.

docs/feature_combo.md

@@ -19,6 +19,7 @@ combo_t key_combos[COMBO_COUNT] = {COMBO(test_combo, KC_ESC)};
 This will send "Escape" if you hit the A and B keys.
 
 !> This method only supports [basic keycodes](keycodes_basic.md). See the examples for more control.
+!> You cannot reuse (share) keys in combos. Each key should only belong to a single combo.  
 
 ## Examples
 
@@ -43,15 +44,15 @@ For a more complicated implementation, you can use the `process_combo_event` fun
 ```c
 enum combo_events {
   ZC_COPY,
-  ZV_PASTE
+  XV_PASTE
   };
 
 const uint16_t PROGMEM copy_combo[] = {KC_Z, KC_C, COMBO_END};
-const uint16_t PROGMEM paste_combo[] = {KC_Z, KC_V, COMBO_END};
+const uint16_t PROGMEM paste_combo[] = {KC_X, KC_V, COMBO_END};
 
 combo_t key_combos[COMBO_COUNT] = {
   [ZC_COPY] = COMBO_ACTION(copy_combo),
-  [ZV_PASTE] = COMBO_ACTION(paste_combo),
+  [XV_PASTE] = COMBO_ACTION(paste_combo),
 };
 
 void process_combo_event(uint8_t combo_index, bool pressed) {
@@ -65,7 +66,7 @@ void process_combo_event(uint8_t combo_index, bool pressed) {
       }
       break;
 
-    case ZV_PASTE:
+    case XV_PASTE:
       if (pressed) {
         register_code(KC_LCTL);
         register_code(KC_V);
@@ -77,7 +78,7 @@ void process_combo_event(uint8_t combo_index, bool pressed) {
 }
 ```
 
-This will send Ctrl+C if you hit Z and C, and Ctrl+V if you hit Z and V.  But you could change this to do stuff like change layers, play sounds, or change settings.
+This will send Ctrl+C if you hit Z and C, and Ctrl+V if you hit X and V.  But you could change this to do stuff like change layers, play sounds, or change settings.
 
 ## Additional Configuration
 

docs/feature_encoders.md

@@ -0,0 +1,48 @@
+# Encoders
+
+Basic encoders are supported by adding this to your `rules.mk`:
+
+    ENCODER_ENABLE = yes
+
+and this to your `config.h`:
+
+    #define NUMBER_OF_ENCODERS 1
+    #define ENCODERS_PAD_A { B12 }
+    #define ENCODERS_PAD_B { B13 }
+
+Each PAD_A/B variable defines an array so multiple encoders can be defined, e.g.:
+
+    #define ENCODERS_PAD_A { encoder1a, encoder2a }
+    #define ENCODERS_PAD_B { encoder1a, encoder2b }
+
+If your encoder's clockwise directions are incorrect, you can swap the A & B pad definitions.
+
+Additionally, the resolution can be specified in the same file (the default & suggested is 4):
+
+    #define ENCODER_RESOLUTION 4
+
+## Callbacks
+
+The callback functions can be inserted into your `<keyboard>.c`:
+
+    void encoder_update_kb(uint8_t index, bool clockwise) {
+        encoder_update_user(index, clockwise);
+    }
+
+or `keymap.c`:
+
+    void encoder_update_user(uint8_t index, bool clockwise) {
+        if (index == 0) {
+            if (clockwise) {
+                register_code(KC_PGDN);
+                unregister_code(KC_PGDN);
+            } else {
+                register_code(KC_PGUP);
+                unregister_code(KC_PGUP);
+            }
+        }
+    }
+
+## Hardware
+
+The A an B lines of the encoders should be wired directly to the MCU, and the C/common lines should be wired to ground.

docs/feature_rgb_matrix.md

@@ -150,6 +150,30 @@ These are the effects that are currently available:
 	#endif
 	    RGB_MATRIX_EFFECT_MAX
 	};
+    
+You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`:
+
+
+|Define                                             |Description                                 |
+|---------------------------------------------------|--------------------------------------------|
+|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS`           |Disables `RGB_MATRIX_ALPHAS_MODS`           |
+|`#define DISABLE_RGB_MATRIX_DUAL_BEACON`           |Disables `RGB_MATRIX_DUAL_BEACON`           |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN`      |Disables `RGB_MATRIX_GRADIENT_UP_DOWN`      |
+|`#define DISABLE_RGB_MATRIX_RAINDROPS`             |Disables `RGB_MATRIX_RAINDROPS`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_ALL`             |Disables `RGB_MATRIX_CYCLE_ALL`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`      |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`      |
+|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`         |Disables `RGB_MATRIX_CYCLE_UP_DOWN`         |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`        |Disables `RGB_MATRIX_RAINBOW_BEACON`        |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`     |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`     |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|
+|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`   |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`   |
+|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`          |Disables `RGB_MATRIX_DIGITAL_RAIN`          |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`        |Disables `RGB_MATRIX_SOLID_REACTIVE`        |
+|`#define DISABLE_RGB_MATRIX_SPLASH`                |Disables `RGB_MATRIX_SPLASH`                |
+|`#define DISABLE_RGB_MATRIX_MULTISPLASH`           |Disables `RGB_MATRIX_MULTISPLASH`           |
+|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`          |Disables `RGB_MATRIX_SOLID_SPLASH`          |
+|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH`     |Disables `RGB_MATRIX_SOLID_MULTISPLASH`     |
+
 
 ## Custom layer effects
 

docs/feature_rgblight.md

@@ -63,8 +63,6 @@ Changing the **Value** sets the overall brightness.
 |`RGB_MODE_GRADIENT`|`RGB_M_G` |Static gradient animation mode                                      |
 |`RGB_MODE_RGBTEST` |`RGB_M_T` |Red, Green, Blue test animation mode                                |
 
-?> For backwards compatibility, `RGB_SMOD` is another alias of `RGB_MOD`.
-
 ## Configuration
 
 Your RGB lighting can be configured by placing these `#define`s in your `config.h`:
@@ -122,6 +120,7 @@ The following options can be used to tweak the various animations:
 |`RGBLIGHT_EFFECT_KNIGHT_LED_NUM`    |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel                             |
 |`RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL`|`1000`       |How long to wait between light changes for the "Christmas" animation, in milliseconds|
 |`RGBLIGHT_EFFECT_CHRISTMAS_STEP`    |`2`          |The number of LEDs to group the red/green colors by for the "Christmas" animation    |
+|`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`360`        |Range adjustment for the rainbow swirl effect to get different swirls                |
 
 You can also modify the speeds that the different modes animate at:
 

docs/feature_tap_dance.md

@@ -26,6 +26,8 @@ This array specifies what actions shall be taken when a tap-dance key is in acti
 
 The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
 
+!> Keep in mind that only [basic keycodes](keycodes_basic.md) are supported here. Custom keycodes are not supported.
+
 And that's the bulk of it!
 
 And now, on to the explanation of how it works!

docs/feature_unicode.md

@@ -30,7 +30,7 @@ Make sure that the order for both matches.
 
 ## UCIS_ENABLE
 
-Supports Unicode up to 0xFFFFFFFF. As with `UNICODE_MAP`, you may want to main a mapping table in your keymap file.  However, there is no keycodes for this feature, you will have to add a keycode or function to call `qk_ucis_start()`. Once you've run that, you can just type the text for your unicode, and then hit space or enter to complete it, or ESC to cancel it. And if it matches an entry in your table, it will automatically "backspace" the trigger word (from your table) and then will input the unicode sequence.
+Supports Unicode up to 0xFFFFFFFF. As with `UNICODE_MAP`, you may want to maintain a mapping table in your keymap file.  However, there is no keycodes for this feature, you will have to add a keycode or function to call `qk_ucis_start()`. Once you've run that, you can just type the text for your unicode, and then hit space or enter to complete it, or ESC to cancel it. And if it matches an entry in your table, it will automatically "backspace" the trigger word (from your table) and then will input the unicode sequence.
 
 For instance, you would need to have a table like this in your keymap:
 

docs/features.md

@@ -8,13 +8,17 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Auto Shift](feature_auto_shift.md) - Tap for the normal key, hold slightly longer for its shifted state.
 * [Backlight](feature_backlight.md) - LED lighting support for your keyboard.
 * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys.
+* [Combos](feature_combo.md) - Custom actions for multiple key holds.
+* [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic").
 * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
+* [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. 
 * [HD44780 LCD Display](feature_hd44780.md) - Support for LCD character displays using the HD44780 standard.
 * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state.
 * [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout.
 * [Leader Key](feature_leader_key.md) - Tap the leader key followed by a sequence to trigger custom behavior.
 * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key.
 * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard.
+* [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it.
 * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard.
 * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard.
 * [RGB Light](feature_rgblight.md) - RGB lighting for your keyboard.

docs/flashing.md

@@ -71,8 +71,8 @@ Flashing sequence:
 
 1. Press the `RESET` keycode, or short RST to GND quickly (you only have 7 seconds to flash once it enters)
 2. Wait for the OS to detect the device
-4. Flash a .hex file
-5. Wait for the device to reset automatically
+3. Flash a .hex file
+4. Wait for the device to reset automatically
 
 or
 
@@ -106,5 +106,28 @@ Flashing sequence:
 
 1. Press the `RESET` keycode, or short RST to GND quickly (you only have 7 seconds to flash once it enters)
 2. Wait for the OS to detect the device
-4. Flash a .hex file
-5. Reset the device into application mode (may be done automatically)
+3. Flash a .hex file
+4. Reset the device into application mode (may be done automatically)
+
+## STM32
+
+All STM32 chips come preloaded with a factory bootloader that cannot be modified nor deleted. Some STM32 chips have bootloaders that do not come with USB programming (e.g. STM32F103) but the process is still the same.
+
+At the moment, no `BOOTLOADER` variable is needed on `rules.mk` for STM32.
+
+Compatible flashers:
+
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
+* [dfu-util](https://github.com/Stefan-Schmidt/dfu-util) / `:dfu-util` (recommended command line)
+
+Flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `RESET` keycode (may not work on STM32F042 devices)
+    * If a reset circuit is present, tap the RESET button
+    * Otherwise, you need to bridge BOOT0 to VCC (via BOOT0 button or bridge), short RESET to GND (via RESET button or bridge), and then let go of the BOOT0 bridge
+2. Wait for the OS to detect the device
+3. Flash a .bin file
+    * You will receive a warning about the DFU signature; Just ignore it
+4. Reset the device into application mode (may be done automatically)
+    * If you are building from command line (e.g. `make planck/rev6:default:dfu-util`), make sure that `:leave` is passed to the `DFU_ARGS` variable inside your `rules.mk` (e.g. `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) so that your device resets after flashing

docs/getting_started_build_tools.md

@@ -8,7 +8,7 @@ Note: If it is your first time here, Check out the "Complete Newbs guide" instea
 
 ## Linux
 
-To ensure you are always up to date, you can just run `sudo util/install_dependencies.sh`. That should always install all the dependencies needed. **This will run `apt-get upgrade`.**
+To ensure you are always up to date, you can just run `sudo util/qmk_install.sh`. That should always install all the dependencies needed. **This will run `apt-get upgrade`.**
 
 You can also install things manually, but this documentation might not be always up to date with all requirements.
 
@@ -57,11 +57,13 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
     brew tap PX4/homebrew-px4
     brew update
     brew install avr-gcc@7
+    brew link --force avr-gcc@7
     brew install dfu-programmer
+    brew install dfu-util
     brew install gcc-arm-none-eabi
     brew install avrdude
 
-This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-libc can take over 20 minutes and exhibit high CPU usage.
+This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@7` can take over 20 minutes and exhibit high CPU usage.
 
 ## Windows with msys2 (recommended)
 
@@ -69,9 +71,9 @@ The best environment to use, for Windows Vista through any later version (tested
 
 * Install msys2 by downloading it and following the instructions here: http://www.msys2.org
 * Open the ``MSYS2 MingGW 64-bit`` shortcut
-* Navigate to your qmk checkout. For example, if it's in the root of your c drive:
+* Navigate to your QMK repository. For example, if it's in the root of your c drive:
  * `$ cd /c/qmk_firmware`
-* Run `util/msys2_install.sh` and follow the prompts
+* Run `util/qmk_install.sh` and follow the prompts
 
 ## Windows 10 (deprecated)
 These are the old instructions for Windows 10. We recommend you use [MSYS2 as outlined above](#windows-with-msys2-recommended).

docs/hardware_avr.md

@@ -66,7 +66,7 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
 #define DESCRIPTION     A custom keyboard
 ```
 
-?> Note: On Windows and macOS the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` fields will be displayed in the list of USB devices. On Linux these values will not be visible in `lsusb`, since Linux takes that information from the list published by the USB-IF.
+?> Note: On Windows and macOS the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` fields will be displayed in the list of USB devices. ?> On Linux these values will not be visible in lsusb by default, since Linux takes the information from the list maintained by [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. lsusb will show the information reported by the device when executed with -v option. It is also present in kernel logs after plugging in the device.
 
 ### Keyboard Matrix Configuration
 

docs/i2c_driver.md

@@ -0,0 +1,82 @@
+# I2C Master Driver
+
+The I2C Master drivers used in QMK have a set of common functions to allow portability between MCUs.
+
+## Available functions
+
+|Function                                                                                                          |Description                                                                                                                                                                  |
+|------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`void i2c_init(void);`                                                                                            |Initializes the I2C driver. This function should be called once before any transaction is initiated.                                                                         |
+|`uint8_t i2c_start(uint8_t address);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
+|`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
+|`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
+|`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
+|`uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
+|`uint8_t i2c_stop(uint16_t timeout);`                                                                             |Stops the I2C driver.                                                                                                                                                        |
+
+### Function Return
+
+All the above functions, except `void i2c_init(void);` return the following truth table:
+
+|Return Value   |Description                                        |
+|---------------|---------------------------------------------------|
+|0              |Operation executed successfully.                   |
+|-1             |Operation failed.                                  |
+|-2             |Operation timed out.                               |
+
+
+## AVR
+
+### Configuration
+
+The following defines can be used to configure the I2C master driver.
+
+|Variable          |Description                                        |Default|
+|------------------|---------------------------------------------------|-------|
+|`#F_SCL`          |Clock frequency in Hz                              |400KHz |
+|`#Prescaler`      |Divides master clock to aid in I2C clock selection |1      |
+
+AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required.
+
+## ARM
+
+For ARM the Chibios I2C HAL driver is under the hood.
+This section assumes an STM32 MCU.
+
+### Configuration
+
+The configuration for ARM MCUs can be quite complex as often there are multiple I2C drivers which can be assigned to a variety of ports.
+
+Firstly the `mcuconf.h` file must be setup to enable the necessary hardware drivers.
+
+|Variable                      |Description                                                                        |Default|
+|------------------------------|------------------------------------------------------------------------------------|-------|
+|`#STM32_I2C_USE_XXX`          |Enable/Disable the hardware driver XXX (each driver should be explicitly listed)    |FALSE  |
+|`#STM32_I2C_BUSY_TIMEOUT`     |Time in ms until the I2C command is aborted if no response is received              |50     |
+|`#STM32_I2C_XXX_IRQ_PRIORITY` |Interrupt priority for hardware driver XXX (THIS IS AN EXPERT SETTING)              |10     |
+|`#STM32_I2C_USE_DMA`          |Enable/Disable the ability of the MCU to offload the data transfer to the DMA unit  |TRUE   |
+|`#STM32_I2C_XXX_DMA_PRIORITY` |Priority of DMA unit for hardware driver XXX (THIS IS AN EXPERT SETTING)            |1      |
+
+Secondly, in the `halconf.h` file, `#define HAL_USE_I2C` must be set to `TRUE`. This allows ChibiOS to load its I2C driver.
+
+Lastly, we need to assign the correct GPIO pins depending on the I2C hardware driver we want to use.
+
+By default the I2C1 hardware driver is assumed to be used. If another hardware driver is used,  `#define I2C_DRIVER I2CDX` should be added to the `config.h` file with X being the number of hardware driver used. For example is I2C3 is enabled, the `config.h` file should contain `#define I2C_DRIVER I2CD3`. This aligns the QMK I2C driver with the Chibios I2C driver.
+
+STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C.
+
+This can be changed by declaring the `i2c_init` function which intentionally has a weak attribute. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
+
+```C
+void i2c_init(void)
+{
+  setPinInput(B6); // Try releasing special pins for a short time
+  setPinInput(B7);
+  chThdSleepMilliseconds(10); // Wait for the release to happen
+
+  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function
+  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function
+}
+```
+
+

docs/index.html

@@ -25,7 +25,8 @@
         placeholder: 'Search Documentation...',
         noData: 'We could not find any documents matching your search.',
         depth: 6
-      }
+      },
+      fallbackLanguages: ['zh']
     }
   </script>
   <script src="//unpkg.com/docsify/lib/docsify.min.js"></script>

docs/internals_gpio_control.md

@@ -12,7 +12,7 @@ The following functions can provide basic control of GPIOs and are found in `qua
 |`setPinInputHigh(pin)`|Set pin as input with build in pull-up                            |
 |`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)|
 |`setPinOutput(pin)`   |Set pin as output                                                 |
-|`writePinHige(pin)`   |Set pin level as high, assuming it is an output                   |
+|`writePinHigh(pin)`   |Set pin level as high, assuming it is an output                   |
 |`writePinLow(pin)`    |Set pin level as low, assuming it is an output                    |
 |`writePin(pin, level)`|Set pin level, assuming it is an output                           |
 |`readPin(pin)`        |Returns the level of the pin                                      |

docs/keycode.txt

@@ -209,6 +209,8 @@ KC_WWW_FORWARD      KC_WFWD
 KC_WWW_STOP         KC_WSTP
 KC_WWW_REFRESH      KC_WREF
 KC_WWW_FAVORITES    KC_WFAV
+KC_BRIGHTNESS_UP    KC_BRIU
+KC_BRIGHTNESS_DOWN  KC_BRID
 /* Mousekey */
 KC_MS_UP            KC_MS_U         Mouse Cursor Up
 KC_MS_DOWN          KC_MS_D         Mouse Cursor Down

docs/keycodes.md

@@ -141,9 +141,9 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_LOCKING_SCROLL`    |`KC_LSCR`           |Locking Scroll Lock                            |
 |`KC_KP_COMMA`          |`KC_PCMM`           |Keypad `,`                                     |
 |`KC_KP_EQUAL_AS400`    |                    |Keypad `=` on AS/400 keyboards                 |
-|`KC_INT1`              |`KC_RO`             |JIS `\` and <code>&#124;</code>                |
+|`KC_INT1`              |`KC_RO`             |JIS `\` and `_`                                |
 |`KC_INT2`              |`KC_KANA`           |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`           |JIS `¥`                                        |
+|`KC_INT3`              |`KC_JYEN`           |JIS `¥` and <code>&#124;</code>                |
 |`KC_INT4`              |`KC_HENK`           |JIS Henkan                                     |
 |`KC_INT5`              |`KC_MHEN`           |JIS Muhenkan                                   |
 |`KC_INT6`              |                    |JIS Numpad `,`                                 |
@@ -203,21 +203,24 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_WWW_FAVORITES`     |`KC_WFAV`           |Browser Favorites (Windows)                    |
 |`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`           |Next Track (macOS)                             |
 |`KC_MEDIA_REWIND`      |`KC_MRWD`           |Previous Track (macOS)                         |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`           |Brightness Up                                  |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`           |Brightness Down                                |
 
 ## [Quantum Keycodes](quantum_keycodes.md#qmk-keycodes)
 
-|Key          |Aliases    |Description                                                          |
-|-------------|-----------|---------------------------------------------------------------------|
-|`RESET`      |           |Put the keyboard into DFU mode for flashing                          |
-|`DEBUG`      |           |Toggle debug mode                                                    |
-|`KC_GESC`    |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
-|`KC_LSPO`    |           |Left Shift when held, `(` when tapped                                |
-|`KC_RSPC`    |           |Right Shift when held, `)` when tapped                               |
-|`KC_LEAD`    |           |The [Leader key](feature_leader_key.md)                              |
-|`KC_LOCK`    |           |The [Lock key](feature_key_lock.md)                                  |
-|`FUNC(n)`    |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
-|`M(n)`       |           |Call macro `n`                                                       |
-|`MACROTAP(n)`|           |Macro-tap `n` idk FIXME                                              |
+|Key            |Aliases    |Description                                                          |
+|---------------|-----------|---------------------------------------------------------------------|
+|`RESET`        |           |Put the keyboard into DFU mode for flashing                          |
+|`DEBUG`        |           |Toggle debug mode                                                    |
+|`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
+|`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
+|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
+|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
+|`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
+|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
+|`M(n)`         |           |Call macro `n`                                                       |
+|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |
 
 ## [Audio Keys](feature_audio.md)
 
@@ -333,7 +336,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
 |`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
 |`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`ALTG(kc)`|                      |Hold Right Control and Alt and press `kc`           |
 |`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
 |`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
 
@@ -460,6 +462,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+
 ## [Unicode Support](feature_unicode.md)
 
 |Key         |Aliases|                                                 |

docs/keycodes_basic.md

@@ -123,9 +123,9 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 |Key       |Aliases  |Description                    |
 |----------|---------|-------------------------------|
-|`KC_INT1` |`KC_RO`  |JIS `\` and <code>&#124;</code>|
+|`KC_INT1` |`KC_RO`  |JIS `\` and `_`                |
 |`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana          |
-|`KC_INT3` |`KC_JYEN`|JIS `¥`                        |
+|`KC_INT3` |`KC_JYEN`|JIS `¥` and <code>&#124;</code>|
 |`KC_INT4` |`KC_HENK`|JIS Henkan                     |
 |`KC_INT5` |`KC_MHEN`|JIS Muhenkan                   |
 |`KC_INT6` |         |JIS Numpad `,`                 |
@@ -219,6 +219,8 @@ Windows and macOS use different keycodes for "next track" and "previous track".
 |`KC_WWW_FAVORITES`     |`KC_WFAV`|Browser Favorites (Windows)  |
 |`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`|Next Track (macOS)           |
 |`KC_MEDIA_REWIND`      |`KC_MRWD`|Previous Track (macOS)       |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`|Brightness Up                |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`|Brightness Down              |
 
 ## Number Pad
 

docs/keycodes_us_ansi_shifted.md

@@ -6,6 +6,10 @@ These keycodes correspond to characters that are "shifted" on a standard US ANSI
 
 Unfortunately, these keycodes cannot be used in Mod-Taps or Layer-Taps, since any modifiers specified in the keycode are ignored.
 
+Additionally, you may run into issues when using Remote Desktop Connection on Windows. Because these codes send shift very fast, Remote Desktop may miss the codes.
+
+To fix this, open Remote Desktop Connection, click on "Show Options", open the the "Local Resources" tab. In the keyboard section, change the drop down to "On this Computer". This will fix the issue, and allow the characters to work correctly.
+
 ## Keycodes
 
 |Key                     |Aliases            |Description        |

docs/newbs.md

@@ -12,6 +12,7 @@ There are 5 main sections to this guide:
 * [Building Your First Firmware](newbs_building_firmware.md)
 * [Flashing Firmware](newbs_flashing.md)
 * [Testing and Debugging](newbs_testing_debugging.md)
+* [Best Practices](newbs_best_practices.md)
 * [Learn More with these Resources](newbs_learn_more_resources.md)
 
 This guide is focused on helping someone who has never compiled software before. It makes choices and recommendations based on that viewpoint. There are alternative methods for many of these procedures, and we support most of those alternatives. If you have any doubt about how to accomplish a task you can [ask us for guidance](getting_started_getting_help.md).

docs/newbs_best_practices.md

@@ -0,0 +1,163 @@
+# Best Practices
+
+## Or, "How I Learned to Stop Worrying and Love Git."
+
+This document aims to instruct novices in the best ways to have a smooth experience in contributing to QMK. We will walk through the process of contributing to QMK, detailing some ways to make this task easier, and then later we'll break some things in order to teach you how to fix them.
+
+This document assumes a few things:
+
+1. You have a GitHub account, and have [forked the qmk_firmware repository](getting_started_github.md) to your account.
+2. You've [set up your build environment](newbs_getting_started.md?id=environment-setup).
+
+
+## Your fork's master: Update Often, Commit Never
+
+It is highly recommended for QMK development, regardless of what is being done or where, to keep your `master` branch updated, but ***never*** commit to it. Instead, do all your changes in a development branch and issue pull requests from your branches when you're developing.
+
+To reduce the chances of merge conflicts — instances where two or more users have edited the same part of a file concurrently — keep your `master` branch relatively up-to-date, and start any new developments by creating a new branch.
+
+### Updating your master branch
+
+To keep your `master` branch updated, it is recommended to add the QMK Firmware repository ("repo") as a remote repository in git. To do this, open your Git command line interface and enter:
+
+```
+git remote add upstream https://github.com/qmk/qmk_firmware.git
+```
+
+To verify that the repository has been added, run `git remote -v`, which should return the following:
+
+```
+$ git remote -v
+origin  https://github.com/<your_username>/qmk_firmware.git (fetch)
+origin  https://github.com/<your_username>/qmk_firmware.git (push)
+upstream        https://github.com/qmk/qmk_firmware.git (fetch)
+upstream        https://github.com/qmk/qmk_firmware.git (push)
+```
+
+Now that this is done, you can check for updates to the repo by running `git fetch upstream`. This retrieves the branches and tags &mdash; collectively referred to as "refs" &mdash; from the QMK repo, which now has the nickname `upstream`. We can now compare the data on our fork `origin` to that held by QMK.
+
+To update your fork's master, run the following, hitting the Enter key after each line:
+
+```
+git checkout master
+git fetch upstream
+git pull upstream master
+git push origin master
+```
+
+This switches you to your `master` branch, retrieves the refs from the QMK repo, downloads the current QMK `master` branch to your computer, and then uploads it to your fork.
+
+### Making Changes
+
+To make changes, create a new branch by entering:
+
+```
+git checkout -b dev_branch
+git push --set-upstream origin dev_branch
+```
+
+This creates a new branch named `dev_branch`, checks it out, and then saves the new branch to your fork. The `--set-upstream` argument tells git to use your fork and the `dev_branch` branch every time you use `git push` or `git pull` from this branch. It only needs to be used on the first push; after that, you can safely use `git push` or `git pull`, without the rest of the arguments.
+
+!> With `git push`, you can use `-u` in place of `--set-upstream` &mdash; `-u` is an alias for `--set-upstream`.
+
+You can name your branch nearly anything you want, though it is recommended to name it something related to the changes you are going to make.
+
+By default `git checkout -b` will base your new branch on the branch that is checked out. You can base your new branch on an existing branch that is not checked out by adding the name of the existing branch to the command:
+
+```
+git checkout -b dev_branch master
+```
+
+Now that you have a development branch, open your text editor and make whatever changes you need to make. It is recommended to make many small commits to your branch; that way, any change that causes issues can be more easily traced and undone if needed. To make your changes, edit and save any files that need to be updated, add them to Git's *staging area*, and then commit them to your branch:
+
+```
+git add path/to/updated_file
+git commit -m "My commit message."
+```
+
+`git add` adds files that have been changed to Git's *staging area*, which is Git's "loading zone." This contains the changes that are going to be *committed* by `git commit`, which saves the changes to the repo. Use descriptive commit messages so you can know what was changed at a glance.
+
+!> If you've changed a lot of files, but all the files are part of the same change, you can use `git add .` to add all the changed files that are in your current directory, rather than having to add each file individually.
+
+### Publishing Your Changes
+
+The last step is to push your changes to your fork. To do this, enter `git push`. Git now publishes the current state of `dev_branch` to your fork.
+
+
+## Resolving Merge Conflicts
+
+Sometimes when your work in a branch takes a long time to complete, changes that have been made by others conflict with changes you have made to your branch when you open a pull request. This is called a *merge conflict*, and is what happens when multiple people edit the same parts of the same files.
+
+### Rebasing Your Changes
+
+A *rebase* is Git's way of taking changes that were applied at one point, reversing them, and then applying the same changes to another point. In the case of a merge conflict, you can rebase your branch to grab the changes that were made between when you created your branch and the present time.
+
+To start, run the following:
+
+```
+git fetch upstream
+git rev-list --left-right --count HEAD...upstream/master
+```
+
+The `git rev-list` command entered here returns the number of commits that differ between the current branch and QMK's master branch. We run `git fetch` first to make sure we have the refs that represent the current state of the upstream repo. The output of the `git rev-list` command entered returns two numbers:
+
+```
+$ git rev-list --left-right --count HEAD...upstream/master
+7       35
+```
+
+The first number represents the number of commits on the current branch since it was created, and the second number is the number of commits made to `upstream/master` since the current branch was created, and thus, the changes that are not recorded in the current branch.
+
+Now that the current states of both the current branch and the upstream repo are known, we can start a rebase operation:
+
+```
+git rebase upstream/master
+```
+
+This tells Git to undo the commits on the current branch, and then reapply them against QMK's master branch.
+
+```
+$ git rebase upstream/master
+First, rewinding head to replay your work on top of it...
+Applying: Commit #1
+Using index info to reconstruct a base tree...
+M       conflicting_file_1.txt
+Falling back to patching base and 3-way merge...
+Auto-merging conflicting_file_1.txt
+CONFLICT (content): Merge conflict in conflicting_file_1.txt
+error: Failed to merge in the changes.
+hint: Use 'git am --show-current-patch' to see the failed patch
+Patch failed at 0001 Commit #1
+
+Resolve all conflicts manually, mark them as resolved with
+"git add/rm <conflicted_files>", then run "git rebase --continue".
+You can instead skip this commit: run "git rebase --skip".
+To abort and get back to the state before "git rebase", run "git rebase --abort".
+```
+
+This tells us that we have a merge conflict, and gives the name of the file with the conflict. Open the conflicting file in your text editor, and somewhere in the file, you'll find something like this:
+
+```
+<<<<<<< HEAD
+<p>For help with any issues, email us at support@webhost.us.</p>
+=======
+<p>Need help? Email support@webhost.us.</p>
+>>>>>>> Commit #1
+```
+
+The line `<<<<<<< HEAD` marks the beginning of a merge conflict, and the `>>>>>>> Commit #1` line marks the end, with the conflicting sections separated by `=======`. The part on the `HEAD` side is from the QMK master version of the file, and the part marked with the commit message is from the current branch and commit.
+
+Because Git tracks *changes to files* rather than the contents of the files directly, if Git can't find the text that was in the file previous to the commit that was made, it won't know how to edit the file. Re-editing the file will solve the conflict. Make your changes, and then save the file.
+
+```
+<p>Need help? Email support@webhost.us.</p>
+```
+
+Now run:
+
+```
+git add conflicting_file_1.txt
+git rebase --continue
+```
+
+Git logs the changes to the conflicting file, and continues applying the commits from our branch until it reaches the end.

docs/newbs_building_firmware.md

@@ -16,7 +16,7 @@ Start by navigating to the `keymaps` folder for your keyboard.
 
 ?> Windows:
 
-    start keyboards/<keyboard_folder>/keymaps
+    start .\\keyboards\\<keyboard_folder>\\keymaps
 
 ## Create a Copy Of The `default` Keymap
 

docs/newbs_getting_started.md

@@ -1,99 +1,97 @@
 # Introduction
 
-Your computer keyboard has a processor inside of it, not unlike the one inside your computer. This processor runs software that is responsible for detecting button presses and sending reports about the state of the keyboard when they are pressed or released. QMK fills the role of that software, detecting button presses and passing that information on to the host computer. When you build your custom layout you are creating the equivalent of an .exe for your keyboard.
+Your computer keyboard has a processor inside of it, not unlike the one inside your computer. This processor runs software that is responsible for detecting button presses and sending reports about the state of the keyboard when buttons are pressed or released. QMK fills the role of that software, detecting button presses and passing that information on to the host computer. When you build your custom keymap, you are creating the equivalent of an executable program for your keyboard.
 
-QMK tries to put a lot of power into your hands by making easy things easy, and hard things possible. You don't have to know how to program to create powerful layouts, you only have to follow a few simple syntax rules.
+QMK tries to put a lot of power into your hands by making easy things easy, and hard things possible. You don't have to know how to program to create powerful keymaps — you only have to follow a few simple syntax rules.
 
 # Getting Started
 
-Before you can build keymaps you need to install some software and setup your build environment. This only has to be done one time no matter how many keyboards you want to compile firmware for.
+Before you can build keymaps, you need to install some software and set up your build environment. This only has to be done once no matter how many keyboards you plan to compile firmware for.
 
 ## Download Software
 
 ### Text Editor
 
-You'll need a program that can edit and save **plain text** files. If you are on Windows you can make due with Notepad, and on Linux you can use Gedit, both of which are simple but functional text editors. On macOS be careful with TextEdit.app, it will not save plain text files unless you make sure to select "Make Plain text" from the "Format" menu, or you can use another program such as Sublime Text.
+You'll need a program that can edit and save **plain text** files. If you're on Windows you can make do with Notepad, and on Linux you can use gedit. Both of these are simple but functional text editors. On macOS, be careful with the default TextEdit app: it will not save plain text files unless you explicitly select _Make Plain Text_ from the _Format_ menu.
+
+You can also download and install a dedicated text editor like [Sublime Text](https://www.sublimetext.com/) or [VS Code](https://code.visualstudio.com/). This is probably the best way to go regardless of platform, as these programs are specifically made for editing code.
 
 ?> Not sure which text editor to use? Laurence Bradford wrote [a great introduction](https://learntocodewith.me/programming/basics/text-editors/) to the subject.
 
 ### QMK Toolbox
 
-QMK Toolbox is an optional graphical Windows and macOS program that allows you to both program and debug your custom keyboard. You will likely prefer it to easily flash your keyboard and receive the debugging messages that your keyboard will print.
+QMK Toolbox is an optional graphical program for Windows and macOS that allows you to both program and debug your custom keyboard. You will likely find it invaluable for easily flashing your keyboard and viewing debug messages that it prints.
 
-Download the files from the links below:
+[Download the latest release here.](https://github.com/qmk/qmk_toolbox/releases/latest)
 
-For Windows: "qmk_toolbox.exe" or "qmk_toolbox_install.exe" (with installer)
+* For Windows: `qmk_toolbox.exe` (portable) or `qmk_toolbox_install.exe` (installer)
+* For macOS: `QMK.Toolbox.app.zip` (portable) or `QMK.Toolbox.pkg` (installer)
 
-For Mac: "QMK.Toolbox.app.zip" or "QMK.Toolbox.pkg" (with installer)
+## Set Up Your Environment
 
-* [Newest Release](https://github.com/qmk/qmk_toolbox/releases/latest)
-* [Source Code](https://github.com/qmk/qmk_toolbox/)
+We've tried to make QMK as easy to set up as possible. You only have to prepare your Linux or Unix environment, then let QMK install the rest.
 
-## Environment Setup
-
-We've tried to make QMK as easy to setup as possible. You only have to prepare your Linux or Unix environment and let QMK install the rest.
-
-?> If you haven't worked with the Linux/Unix command line before there are a few basic concepts and commands you should learn. These resources will teach you enough to work with QMK:<br>
+?> If you haven't worked with the Linux/Unix command line before, there are a few basic concepts and commands you should learn. These resources will teach you enough to be able to work with QMK:<br>
 [Must Know Linux Commands](https://www.guru99.com/must-know-linux-commands.html)<br>
 [Some Basic Unix Commands](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
 
 ### Windows
 
-You will need to install msys2 and git.
+You will need to install MSYS2 and Git.
 
-* Follow the installation instructions on the msys2 homepage: http://www.msys2.org
-* Close any open msys2 terminals, and open a new terminal
-* Install git by running this command: `pacman -S git`
+* Follow the installation instructions on the [MSYS2 homepage](http://www.msys2.org).
+* Close any open MSYS2 terminals and open a new MSYS2 MinGW 64-bit terminal.
+* Install Git by running this command: `pacman -S git`.
 
 ### macOS
 
-You will need to install homebrew. Follow the instructions on the homebrew homepage: https://brew.sh
+You will need to install Homebrew. Follow the instructions on the [Homebrew homepage](https://brew.sh).
 
-After homebrew is installed continue with "Download QMK", following step "Setup QMK" runs a script that will install other packages.
+After Homebrew is installed, continue with _Set Up QMK_. In that step you will run a script that will install other packages.
 
 ### Linux
 
-You will need to install git. It's extremely likely you already have it, but if not one of the following commands should install it:
+You will need to install Git. It's very likely that you already have it, but if not, one of the following commands should install it:
 
-* Debian/Ubuntu/Devuan: `apt-get install git`
-* Fedora/Redhat/Centos: `yum install git`
+* Debian / Ubuntu / Devuan: `apt-get install git`
+* Fedora / Red Hat / CentOS: `yum install git`
 * Arch: `pacman -S git`
 
-## Download QMK
+?> Docker is also an option on all platforms. [Click here for details.](getting_started_build_tools.md#docker)
 
-Once you have setup your Linux/Unix environment you are ready to download QMK. We will do this by using git to "clone" the QMK repository. Open a Terminal or MSYS2 Console window and leave it open for the remainder of this guide. Inside that window run these two commands:
+## Set Up QMK
+
+Once you have set up your Linux/Unix environment, you are ready to download QMK. We will do this by using Git to "clone" the QMK repository. Open a Terminal or MSYS2 MinGW window and leave it open for the remainder of this guide. Inside that window run these two commands:
 
     git clone https://github.com/qmk/qmk_firmware.git
     cd qmk_firmware
 
-?> If you already know [how to use GitHub](getting_started_github.md) we recommend you create and clone your own fork instead. If you don't know what that means you can safely ignore this message.
+?> If you already know [how to use GitHub](getting_started_github.md), we recommend that you create and clone your own fork instead. If you don't know what that means, you can safely ignore this message.
 
-## Setup QMK
+QMK comes with a script to help you set up the rest of what you'll need. You should run it now by typing in this command:
 
-QMK comes with a script to help you setup the rest of what you'll need. You should run it now by typing in this command:
-
-    ./util/qmk_install.sh
+    util/qmk_install.sh
 
 ## Test Your Build Environment
 
-Now that your QMK build environment is setup you can build a firmware for your keyboard. Start by trying to build the default layout for your keyboard. You should be able to do that with a command in this format:
+Now that your QMK build environment is set up, you can build a firmware for your keyboard. Start by trying to build the keyboard's default keymap. You should be able to do that with a command in this format:
 
     make <keyboard>:default
 
-For example, to build a firmware for a Clueboard 66% use:
+For example, to build a firmware for a Clueboard 66% you would use:
 
     make clueboard/66/rev3:default
 
 When it is done you should have a lot of output that ends similar to this:
 
 ```
-Linking: .build/clueboard_66_rev2_default.elf                                                       [OK]
-Creating load file for flashing: .build/clueboard_66_rev2_default.hex                               [OK]
-Copying clueboard_66_rev2_default.hex to qmk_firmware folder                                        [OK]
-Checking file size of clueboard_66_rev2_default.hex                                                 [OK]
- * File size is fine - 25174/28672
+Linking: .build/clueboard_66_rev3_default.elf                                                       [OK]
+Creating load file for flashing: .build/clueboard_66_rev3_default.hex                               [OK]
+Copying clueboard_66_rev3_default.hex to qmk_firmware folder                                        [OK]
+Checking file size of clueboard_66_rev3_default.hex                                                 [OK]
+ * The firmware size is fine - 26356/28672 (2316 bytes free)
 ```
 
-## Creating Your Layout
+# Creating Your Keymap
 
-Now you are ready to create your own personal layout. Move on to [Building Your First Firmware](newbs_building_firmware.md) for that.
+You are now ready to create your own personal keymap! Move on to [Building Your First Firmware](newbs_building_firmware.md) for that.

docs/newbs_learn_more_resources.md

@@ -1,13 +1,15 @@
 # Learning Resources
-These resources are aimed at giving new members in the qmk community more understanding to the information provided in the newbs docs.
+
+These resources are aimed at giving new members in the QMK community more understanding to the information provided in the Newbs docs.
 
 Git resources:
 
 * [Great General Tutorial](https://www.codecademy.com/learn/learn-git)
 * [Git Game To Learn From Examples](https://learngitbranching.js.org/)
 * [Git Resources to Learn More About Github](getting_started_github.md)
-* [Git Resources Aimed Specificly toward QMK](contributing.md)
+* [Git Resources Aimed Specifically toward QMK](contributing.md)
 
 
 Command Line resources:
+
 * [Good General Tutorial on Command Line](https://www.codecademy.com/learn/learn-the-command-line)

docs/newbs_testing_debugging.md

@@ -28,6 +28,6 @@ Sometimes it's useful to print debug messages from within your [custom code](cus
 After that you can use a few different print functions:
 
 * `print("string")`: Print a simple string.
-* `sprintf("%s string", var)`: Print a formatted string
+* `uprintf("%s string", var)`: Print a formatted string
 * `dprint("string")` Print a simple string, but only when debug mode is enabled
 * `dprintf("%s string", var)`: Print a formatted string, but only when debug mode is enabled

docs/quantum_keycodes.md

@@ -8,15 +8,16 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are
 
 ## QMK Keycodes
 
-|Key          |Aliases    |Description                                                          |
-|-------------|-----------|---------------------------------------------------------------------|
-|`RESET`      |           |Put the keyboard into DFU mode for flashing                          |
-|`DEBUG`      |           |Toggle debug mode                                                    |
-|`KC_GESC`    |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
-|`KC_LSPO`    |           |Left Shift when held, `(` when tapped                                |
-|`KC_RSPC`    |           |Right Shift when held, `)` when tapped                               |
-|`KC_LEAD`    |           |The [Leader key](feature_leader_key.md)                              |
-|`KC_LOCK`    |           |The [Lock key](feature_key_lock.md)                                  |
-|`FUNC(n)`    |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
-|`M(n)`       |           |Call macro `n`                                                       |
-|`MACROTAP(n)`|           |Macro-tap `n` idk FIXME                                              |
+|Key            |Aliases    |Description                                                          |
+|---------------|-----------|---------------------------------------------------------------------|
+|`RESET`        |           |Put the keyboard into DFU mode for flashing                          |
+|`DEBUG`        |           |Toggle debug mode                                                    |
+|`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
+|`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
+|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
+|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
+|`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
+|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
+|`M(n)`         |           |Call macro `n`                                                       |
+|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |

docs/ref_functions.md

@@ -1,28 +1,79 @@
 # List of Useful Core Functions To Make Your Keyboard Better
 
-There are a lot of hidden functions in QMK that are incredible useful, or may add a bit of functionality that you've been wanting.  Functions that are specific to certain features are not included here, as those will be on their respective feature page. 
+There are a lot of hidden functions in QMK that are incredible useful, or may add a bit of functionality that you've been wanting.  Functions that are specific to certain features are not included here, as those will be on their respective feature page.
 
 ## (OLKB) Tri Layers
 
-There are actually separate functions that you can use there, depending on what you're after. 
+There are actually separate functions that you can use there, depending on what you're after.
 
-The first is the `update_tri_layer(x, y, z)` function.   This function check to see if layers `x` and `y` are both on. If they are both on, then it runs on layer `z`.  Otherwise, if both `x` and `y` are not both on (either only one is, or neither is), then it runs off layer `z`. 
+### `update_tri_layer(x, y, z)`
 
-This function is useful if you want to create specific keys that have this functionality, but other layer keycodes won't do this. 
+The first is the `update_tri_layer(x, y, z)` function.   This function check to see if layers `x` and `y` are both on. If they are both on, then it runs on layer `z`.  Otherwise, if both `x` and `y` are not both on (either only one is, or neither is), then it runs off layer `z`.
 
-The other function is `update_tri_layer_state(state, x, y, z)`.  This function is meant to be called from they [`layer_state_set_*` functions](custom_quantum_functions.md#layer-change-code).  This means that any time that you use a keycode to change the layer, this will be checked.  So you could use `LT(layer, kc)` to change the layer and it will trigger the same layer check. 
+This function is useful if you want to create specific keys that have this functionality, but other layer keycodes won't do this.
 
-The caveat to this method is that you cannot access the `z` layer without having `x` and `y` layers on, since if you try to activate just layer `z`, it will run this code and turn off layer `z` before you could use it. 
+#### Example
+
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    }
+  return true;
+}
+```
+
+### `update_tri_layer_state(state, x, y, z)`
+The other function is `update_tri_layer_state(state, x, y, z)`.  This function is meant to be called from they [`layer_state_set_*` functions](custom_quantum_functions.md#layer-change-code).  This means that any time that you use a keycode to change the layer, this will be checked.  So you could use `LT(layer, kc)` to change the layer and it will trigger the same layer check.
+
+The caveat to this method is that you cannot access the `z` layer without having `x` and `y` layers on, since if you try to activate just layer `z`, it will run this code and turn off layer `z` before you could use it.
+
+#### Example
+
+```c
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+```
+
+Alternatively, you don't have to immediately "return" the value.  This is useful if you want to add multiple tri layers, or if you want to add additional effects.
+
+```c
+uint32_t layer_state_set_user(uint32_t state) {
+  state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+  state = update_tri_layer_state(state, _RAISE, _SYMB, _SPECIAL);
+  return state;
+}
+```
 
 ## Setting the Persistent Default Layer
 
-Do you want to set the default layer, so that it's retained even after you unplug the board?  If so, this is the function for you. 
+Do you want to set the default layer, so that it's retained even after you unplug the board?  If so, this is the function for you.
 
-To use this, you would use `set_single_persistent_default_layer(layer)`.  If you have a name defined for your layer, you can use that instead (such as _QWERTY, _DVORAK or _COLEMAK). 
+To use this, you would use `set_single_persistent_default_layer(layer)`.  If you have a name defined for your layer, you can use that instead (such as _QWERTY, _DVORAK or _COLEMAK).
 
-This will set the default layer, update the persistent settings, and play a tune if you have [Audio](feature_audio.md) enabled on your board, and the default layer sounds set. 
+This will set the default layer, update the persistent settings, and play a tune if you have [Audio](feature_audio.md) enabled on your board, and the default layer sounds set.
 
-To configure the default layer sounds, you would want to define this in your `config.h` file, like this: 
+To configure the default layer sounds, you would want to define this in your `config.h` file, like this:
 
 ```c
 #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
@@ -36,13 +87,33 @@ To configure the default layer sounds, you would want to define this in your `co
 
 ## Reseting the keyboard
 
-There is the `RESET` quantum keycode that you can use. But if you want to reset the board as part of a macro, rather than hitting a key separately, you can do that. 
+There is the `RESET` quantum keycode that you can use. But if you want to reset the board as part of a macro, rather than hitting a key separately, you can do that.
 
 And to do so, add `reset_keyboard()` to your function or macro, and this will reset to bootloader.
 
 ## Wiping the EEPROM (Persistent Storage)
 
-If you're having issues with Audio, RGB Underglow, backlighting or keys acting weird, then you can reset the EEPROM (persistent setting storage).  Bootmagic is one way to do this, but if that isn't enabled, then you can use a custom macro to do so. 
+If you're having issues with Audio, RGB Underglow, backlighting or keys acting weird, then you can reset the EEPROM (persistent setting storage).  Bootmagic is one way to do this, but if that isn't enabled, then you can use a custom macro to do so.
 
-To wipe the EEPROM, run `eeconfig_init()` from your function or macro to reset most of the settings to default. 
+To wipe the EEPROM, run `eeconfig_init()` from your function or macro to reset most of the settings to default.
 
+## Tap random key
+
+If you want to send a random character to the host computer, you can use the `tap_random_base64()` function. This [pseudorandomly](https://en.wikipedia.org/wiki/Pseudorandom_number_generator) selects a number between 0 and 63, and then sends a key press based on that selection. (0–25 is `A`–`Z`, 26–51 is `a`–`z`, 52–61 is `0`–`9`, 62 is `+` and 63 is `/`).  
+
+?> Needless to say, but this is _not_ a cryptographically secure method of generating random Base64 keys or passwords.
+
+## Software Timers
+
+It's possible to start timers and read values for time-specific events. Here's an example:
+
+```c
+static uint16_t key_timer;
+key_timer = timer_read();
+
+if (timer_elapsed(key_timer) < 100) {
+  // do something if less than 100ms have passed
+} else {
+  // do something if 100ms or more have passed
+}
+```

docs/reference_configurator_support.md

@@ -0,0 +1,195 @@
+# Supporting Your Keyboard in QMK Configurator
+
+This page covers how to properly support keyboards in the [QMK Configurator](https://config.qmk.fm/).
+
+
+## How the Configurator Understands Keyboards
+
+To understand how the Configurator understands keyboards, first one must understand layout macros. For this exercise, we're going to imagine a 17-key numpad PCB, which we're going to call `numpad`.
+
+```
+┌───┬───┬───┬───┐
+│NLk│ / │ * │ - │
+├───┼───┼───┼───┤
+│7  │8  │9  │ + │
+├───┼───┼───┤   │
+│4  │5  │6  │   │
+├───┼───┼───┼───┤
+│1  │2  │3  │Ent│
+├───┴───┼───┤   │
+│0      │ . │   │
+└───────┴───┴───┘
+```
+
+?> For more on layout macros, see [Understanding QMK: Matrix Scanning](understanding_qmk.md?id=matrix-scanning) and [Understanding QMK: Matrix to Physical Layout Map](understanding_qmk.md?id=matrix-to-physical-layout-map).
+
+The Configurator's API reads the keyboard's `.h` file from `qmk_firmware/keyboards/<keyboard>/<keyboard>.h`. For our numpad, this file would be `qmk_firmware/keyboards/numpad/numpad.h`:
+
+```c
+#pragma once
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22,      \
+    k30, k31, k32, k33, \
+    k40,      k42       \
+  ) { \
+    { k00, k01,   k02, k03   }, \
+    { k10, k11,   k12, k13   }, \
+    { k20, k21,   k22, KC_NO }, \
+    { k30, k31,   k32, k33   }, \
+    { k40, KC_NO, k42, KC_NO }  \
+}
+```
+
+QMK uses `KC_NO` to designate places in the switch matrix where there is no switch. Sometimes, `XXX`, `___` or `____` are used as shorthand to make this section easier to read if it needs to be debugged. This is usually defined near the beginning of the `.h` file:
+
+```c
+#pragma once
+
+#define XXX KC_NO
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22,      \
+    k30, k31, k32, k33, \
+    k40,      k42       \
+  ) { \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, XXX }, \
+    { k30, k31, k32, k33 }, \
+    { k40, XXX, k42, XXX }  \
+}
+```
+
+!> This usage differs from that of keymap macros, which almost always use `XXXXXXX` (seven capital X's) for `KC_NO` and `_______` (seven underscores) for `KC_TRNS`.
+
+!> To prevent user confusion, using `KC_NO` is preferred.
+
+The layout macro tells the Configurator that our keyboard has 17 keys, arranged in five rows of four columns each. Our switch positions are named `k<row><column>`, counting from 0. The names themselves actually don't matter, as long as they match between the top section, which receives the keycodes from the keymap, and the bottom half which designates where each key is in the matrix.
+
+To display our keyboard in a way that resembles the physical keyboard, we need to build a JSON file that tells the Configurator how to tie the physical locations and sizes of our keys to our switch matrix.
+
+## Building the JSON file
+
+To build the JSON file, the easiest way is to build the layout in [Keyboard Layout Editor](http://www.keyboard-layout-editor.com/) ("KLE"), from which we'll feed the Raw Data into a QMK tool that converts this data into a JSON the Configurator will read and use. Since KLE opens by default with a numpad layout, we're just going to remove the Getting Started instructions, and use what's left.
+
+Once the layout is as desired, move to the Raw Data tab in KLE, and copy the contents:
+
+```
+["Num Lock","/","*","-"],
+["7\nHome","8\n↑","9\nPgUp",{h:2},"+"],
+["4\n←","5","6\n→"],
+["1\nEnd","2\n↓","3\nPgDn",{h:2},"Enter"],
+[{w:2},"0\nIns",".\nDel"]
+```
+
+To convert this data into our JSON, go to the [QMK KLE-JSON Converter](https://qmk.fm/converter/), paste the Raw Data into the Input field, and click the Convert button. After a moment, our JSON data will appear in the Output field. Copy the contents to a new text document, and name the document `info.json`, saving it in the same folder that contains `numpad.h`.
+
+Use the `keyboard_name` object to set the name of the keyboard. The `bootloader` object is deprecated, so it can be deleted. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality.
+
+```json
+{
+    "keyboard_name": "Numpad",
+    "url": "",
+    "maintainer": "qmk",
+    "tags": {
+        "form_factor": "numpad"
+    },
+    "width": 4,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Num Lock", "x":0, "y":0},
+                {"label":"/", "x":1, "y":0},
+                {"label":"*", "x":2, "y":0},
+                {"label":"-", "x":3, "y":0},
+                {"label":"7", "x":0, "y":1},
+                {"label":"8", "x":1, "y":1},
+                {"label":"9", "x":2, "y":1},
+                {"label":"+", "x":3, "y":1, "h":2},
+                {"label":"4", "x":0, "y":2},
+                {"label":"5", "x":1, "y":2},
+                {"label":"6", "x":2, "y":2},
+                {"label":"1", "x":0, "y":3},
+                {"label":"2", "x":1, "y":3},
+                {"label":"3", "x":2, "y":3},
+                {"label":"Enter", "x":3, "y":3, "h":2},
+                {"label":"0", "x":0, "y":4, "w":2},
+                {"label":".", "x":2, "y":4}
+            ]
+        }
+    }
+}
+```
+
+The `layouts` object contains the data that represents the physical layout of the keyboard. It has an object `LAYOUT`, which needs to match the name of our layout macro from `numpad.h`. The `LAYOUT` object itself has an object named `layout`, which contains one JSON object for each physical key on our keyboard, formatted as follows:
+
+```
+  ┌ The name of the key. Not displayed in the Configurator.
+  │                   ┌ The key's X-axis location, in key units from the
+  │                   │ keyboard's left edge.
+  │                   │      ┌ The key's Y-axis location, in key units from
+  │                   │      │ the keyboard's top (rear-facing) edge.
+  ↓                   ↓      ↓
+{"label":"Num Lock", "x":0, "y":0},
+```
+
+Some objects will also have `"w"` and `"h"` keys, which represent a key's width and height, respectively.
+
+?> For more on the `info.json` files, see [QMK Keyboard Guidelines: Keyboard Metadata](hardware_keyboard_guidelines.md?id=keyboard-metadata)
+
+
+## How the Configurator Programs Keys
+
+The Configurator's API uses the layout macro and the JSON file we've given it to create a visual representation of the keyboard that has each visual object tied to a specific key, in sequence:
+
+key in layout macro | JSON object used
+:---: | :----
+k00   | {"label":"Num Lock", "x":0, "y":0}
+k01   | {"label":"/", "x":1, "y":0}
+k02   | {"label":"*", "x":2, "y":0}
+k03   | {"label":"-", "x":3, "y":0}
+k10   | {"label":"7", "x":0, "y":1}
+k11   | {"label":"8", "x":1, "y":1}
+k12   | {"label":"9", "x":2, "y":1}
+k13   | {"label":"+", "x":3, "y":1, "h":2}
+k20   | {"label":"4", "x":0, "y":2}
+k21   | {"label":"5", "x":1, "y":2}
+k22   | {"label":"6", "x":2, "y":2}
+k30   | {"label":"1", "x":0, "y":3}
+k31   | {"label":"2", "x":1, "y":3}
+k32   | {"label":"3", "x":2, "y":3}
+k33   | {"label":"Enter", "x":3, "y":3, "h":2}
+k40   | {"label":"0", "x":0, "y":4, "w":2}
+k42   | {"label":".", "x":2, "y":4}
+
+When a user selects the top-left key in the Configurator, and assigns Num Lock to it, the Configurator builds a keymap file with `KC_NLCK` as the first key, and so on as the keymap is built. The `label` keys are not used; they are only for the user's reference in identifying specific keys when debugging the `info.json` file.
+
+
+## Issues and Hazards
+
+Currently, the Configurator does not support key rotation or non-rectangular key shapes like ISO Enter. Additionally, keys that are vertically-offset from their "row" &mdash; the arrow keys on 1800-layouts like the [TKC1800](https://github.com/qmk/qmk_firmware/tree/4ac48a61a66206beaf2fdd5f2939d8bbedd0004c/keyboards/tkc1800/) being a prominent example &mdash; confuse the KLE-to-JSON Converter, if not adjusted for by the contributor of the `info.json` file.
+
+### Workarounds
+
+#### Non-rectangular keys
+
+For ISO Enter keys, QMK custom is to display it as a rectangular key, 1.25u wide and 2u high, aligned so its right edge is aligned with the right edge of the alphanumeric key block.
+
+![](https://i.imgur.com/JKngtTw.png)  
+*A 60% keyboard in standard ISO layout, as rendered by QMK Configurator.*
+
+#### Vertically-offset keys
+
+For vertically-offset keys, place them in KLE as if they were not offset, then edit the Y-values as needed in the converted JSON file
+
+![](https://i.imgur.com/fmDvDzR.png)  
+*An 1800-layout keyboard as rendered in Keyboard Layout Editor, without the vertical offset applied to the arrow keys.*
+
+![](https://i.imgur.com/8beYMBR.png)  
+*A Unix diff file, showing the changes needed to vertically-offset the arrow keys in our keyboard's JSON file.*

docs/zh/README.md

@@ -0,0 +1,32 @@
+# QMK鍵盤固件
+
+[![當前版本](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)
+[![築邦](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware)
+[![不和諧](https://img.shields.io/discord/440868230475677696.svg)](https://discord.gg/Uq7gcHh)
+[![文檔狀態](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm)
+[![GitHub的貢獻者](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
+[![GitHub的叉](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
+
+## 什麼是QMK固件？
+
+QMK是一個由社群維護的開源鍵盤韌體，其中包含了QMK Toolbox、qmk.fm和其它文件。QMK韌體是以[tmk\_keyboard](http://github.com/tmk/tmk_keyboard)為基礎，讓一些有用的功能在Atmel AVR控制器實現，使用於[OLKB](https://olkb.com)、[ergodox EZ](http://www.ergodox-ez.com)，和[Clueboard](http://clueboard.co/)的產品中。它也被移植到使用ChibiOS的ARM晶片上。你也可以用它來讓你徒手佈線，或是客製的鍵盤PCB發揮功能。
+
+## 如何得到QMK
+
+如果你打算貢獻鍵盤佈局，鍵盤或功能QMK，最容易做的事情是[叉通過Github上爬行](https://github.com/qmk/qmk_firmware#fork-destination-box)，和克隆你爬在本地進行更改，推動他們，然後打開從你的叉子[拉請求](https://github.com/qmk/qmk_firmware/pulls)。
+
+否則，您可以直接下載([拉鍊](https://github.com/qmk/qmk_firmware/zipball/master) [焦油](https://github.com/qmk/qmk_firmware/tarball/master))，或者通過GIT中克隆它(`git@github.com:qmk/qmk_firmware.git`)或HTTP(`https://github.com/qmk/qmk_firmware.git`)。
+
+## 如何編譯
+
+你可以編譯之前，你需要[安裝環境](getting_started_build_tools.md)用於AVR或/和ARM開發。一旦完成，你會使用`make`命令建立一個鍵盤並用以下符號鍵盤佈局
+
+    make planck/rev4:default
+
+這將建立`rev4` `planck`的修訂與`default`鍵盤映射。並非所有鍵盤有一個修訂版(也稱為子項目或文件夾)，在這種情況下，它可以被省略：
+
+    make preonic:default
+
+## 如何赶近
+
+QMK有很多[特點](features.md)探索和很好的協議[參考文獻](http://docs.qmk.fm)挖通的。大部分功能通過修改[鍵盤映射(keymap.md)，並改變[鍵碼](keycodes.md)冤大頭。

docs/zh/_sidebar.md

@@ -0,0 +1,99 @@
+* [完全指南菜鳥](zh/newbs.md)
+  * [入門](zh/newbs_getting_started.md)
+  * [構建第一個固件](zh/newbs_building_firmware.md)
+  * [刷新固件](zh/newbs_flashing.md)
+  * [測試和調試](zh/newbs_testing_debugging.md)
+  * [最佳實踐](zh/newbs_best_practices.md)
+  * [學習資源](zh/newbs_learn_more_resources.md)
+
+* [QMK基礎](zh/README.md)
+  * [QMK簡介](zh/getting_started_introduction.md)
+  * [特約QMK](zh/contributing.md)
+  * [如何使用Github上](zh/getting_started_github.md)
+  * [獲得幫助](zh/getting_started_getting_help.md)
+
+* [常問問題](zh/faq.md)
+  * [常問問題](zh/faq_general.md)
+  * [構建/編譯QMK](zh/faq_build.md)
+  * [調試/故障排除QMK](zh/faq_debug.md)
+  * [鍵盤佈局](zh/faq_keymap.md)
+
+* 詳細指南
+  * [安裝編譯工具](zh/getting_started_build_tools.md)
+  * [流浪漢指南](zh/getting_started_vagrant.md)
+  * [構建/編譯器指令](zh/getting_started_make_guide.md)
+  * [刷新固件](zh/flashing.md)
+  * [定制功能](zh/custom_quantum_functions.md)
+  * [鍵盤映射概述](zh/keymap.md)
+
+* [硬件](zh/hardware.md)
+  * [AVR處理器](zh/hardware_avr.md)
+  * [司機](zh/hardware_drivers.md)
+
+* 參考
+  * [Keyboard Guidelines](zh/hardware_keyboard_guidelines.md)
+  * [Config Options](zh/config_options.md)
+  * [Keycodes](zh/keycodes.md)
+  * [Documentation Best Practices](zh/documentation_best_practices.md)
+  * [Documentation Templates](zh/documentation_templates.md)
+  * [Glossary](zh/reference_glossary.md)
+  * [Unit Testing](zh/unit_testing.md)
+  * [Useful Functions](zh/ref_functions.md)
+  * [Configurator Support](zh/reference_configurator_support.md)
+
+* [特點](zh/features.md)
+  * [Basic Keycodes](zh/keycodes_basic.md)
+  * [Quantum Keycodes](zh/quantum_keycodes.md)
+  * [Advanced Keycodes](zh/feature_advanced_keycodes.md)
+  * [Audio](zh/feature_audio.md)
+  * [Auto Shift](zh/feature_auto_shift.md)
+  * [Backlight](zh/feature_backlight.md)
+  * [Bluetooth](zh/feature_bluetooth.md)
+  * [Bootmagic](zh/feature_bootmagic.md)
+  * [Combos](zh/feature_combo)
+  * [Command](zh/feature_command.md)
+  * [Dynamic Macros](zh/feature_dynamic_macros.md)
+  * [Encoders](zh/feature_encoders.md)
+  * [Grave Escape](zh/feature_grave_esc.md)
+  * [Key Lock](zh/feature_key_lock.md)
+  * [Layouts](zh/feature_layouts.md)
+  * [Leader Key](zh/feature_leader_key.md)
+  * [Macros](zh/feature_macros.md)
+  * [Mouse Keys](zh/feature_mouse_keys.md)
+  * [One Shot Keys](zh/feature_advanced_keycodes.md#one-shot-keys)
+  * [Pointing Device](zh/feature_pointing_device.md)
+  * [PS/2 Mouse](zh/feature_ps2_mouse.md)
+  * [RGB Lighting](zh/feature_rgblight.md)
+  * [RGB Matrix](zh/feature_rgb_matrix.md)
+  * [Space Cadet Shift](zh/feature_space_cadet_shift.md)
+  * [Space Cadet Shift Enter](zh/feature_space_cadet_shift_enter.md)
+  * [Stenography](zh/feature_stenography.md)
+  * [Swap Hands](zh/feature_swap_hands.md)
+  * [Tap Dance](zh/feature_tap_dance.md)
+  * [Terminal](zh/feature_terminal.md)
+  * [Thermal Printer](zh/feature_thermal_printer.md)
+  * [Unicode](zh/feature_unicode.md)
+  * [Userspace](zh/feature_userspace.md)
+  * [US ANSI Shifted Keys](zh/keycodes_us_ansi_shifted.md)
+
+* 對於製造商和遊戲模組
+  * [Hand Wiring Guide](zh/hand_wire.md)
+  * [ISP Flashing Guide](zh/isp_flashing_guide.md)
+  * [ARM Debugging Guide](zh/arm_debugging.md)
+  * [I2C Driver](zh/i2c_driver.md)
+
+* 為了更深入的了解
+  * [How Keyboards Work](zh/how_keyboards_work.md)
+  * [Understanding QMK](zh/understanding_qmk.md)
+
+* 其它主題
+  * [Using Eclipse with QMK](zh/eclipse.md)
+
+* QMK內部（進行中）
+  * [Defines](zh/internals_defines.md)
+  * [Input Callback Reg](zh/internals_input_callback_reg.md)
+  * [Midi Device](zh/internals_midi_device.md)
+  * [Midi Device Setup Process](zh/internals_midi_device_setup_process.md)
+  * [Midi Util](zh/internals_midi_util.md)
+  * [Send Functions](zh/internals_send_functions.md)
+  * [Sysex Tools](zh/internals_sysex_tools.md)

drivers/arm/i2c_master.c

@@ -26,12 +26,13 @@
  */
 
 #include "i2c_master.h"
+#include "quantum.h"
 #include <string.h>
 #include <hal.h>
 
 static uint8_t i2c_address;
 
-// This configures the I2C clock to 400Mhz assuming a 72Mhz clock
+// This configures the I2C clock to 400khz assuming a 72Mhz clock
 // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 static const I2CConfig i2cconfig = {
   STM32_TIMINGR_PRESC(15U) |
@@ -41,11 +42,17 @@ static const I2CConfig i2cconfig = {
   0
 };
 
+__attribute__ ((weak))
 void i2c_init(void)
 {
-  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
-  chThdSleepMilliseconds(10);
+  //palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT);
 
+  // Try releasing special pins for a short time
+  palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
+  palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
+
+  chThdSleepMilliseconds(10);
+ 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
   palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
 

drivers/arm/i2c_master.h

@@ -34,6 +34,7 @@ void i2c_init(void);
 uint8_t i2c_start(uint8_t address);
 uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_stop(uint16_t timeout);

drivers/avr/ws2812.h

@@ -69,7 +69,4 @@ void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
 #define CONCAT_EXP(a, b)   CONCAT(a, b)
 #endif
 
-// #define ws2812_PORTREG  CONCAT_EXP(PORT,ws2812_port)
-// #define ws2812_DDRREG   CONCAT_EXP(DDR,ws2812_port)
-
 #endif /* LIGHT_WS2812_H_ */

drivers/haptic/DRV2605L.c

@@ -0,0 +1,129 @@
+/* Copyright 2018 ishtob
+ * Driver for DRV2605L written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "DRV2605L.h"
+#include "print.h"
+#include <stdlib.h>
+#include <stdio.h>
+#include <math.h>
+
+
+uint8_t DRV2605L_transfer_buffer[20];
+uint8_t DRV2605L_tx_register[0];
+uint8_t DRV2605L_read_buffer[0];
+uint8_t DRV2605L_read_register;
+
+
+void DRV_write(uint8_t drv_register, uint8_t settings) {
+  DRV2605L_transfer_buffer[0] = drv_register;
+  DRV2605L_transfer_buffer[1] = settings;
+  i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100);
+}
+
+uint8_t DRV_read(uint8_t regaddress) {
+  DRV2605L_tx_register[0] = regaddress;
+  if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1,
+    DRV2605L_tx_register, 1,
+    DRV2605L_read_buffer, 1
+)){
+    printf("err reading reg \n");
+  }
+  DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+return DRV2605L_read_register;
+}
+
+void DRV_init(void)
+{
+  i2c_init();
+  i2c_start(DRV2605L_BASE_ADDRESS);
+
+  /* 0x07 sets DRV2605 into calibration mode */
+  DRV_write(DRV_MODE,0x07); 
+
+//  DRV_write(DRV_FEEDBACK_CTRL,0xB6);
+    
+  #if FB_ERM_LRA == 0
+    /* ERM settings */
+  DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE/21.33)*1000);
+  #if ERM_OPEN_LOOP == 0
+  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK*(DRIVE_TIME+BLANKING_TIME+IDISS_TIME))/0.02133)/(DRIVE_TIME-0.0003))); 
+  #elif ERM_OPEN_LOOP == 1
+  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
+  #endif
+  #elif FB_ERM_LRA == 1
+  DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150+(SAMPLE_TIME*50))*0.000001)) + 0.0003)* F_LRA)/0.02071)));
+  #if LRA_OPEN_LOOP == 0
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK/sqrt(1-(F_LRA*0.0008))/0.02133)));
+  #elif LRA_OPEN_LOOP == 1
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
+  #endif
+  #endif
+      
+  DRVREG_FBR FB_SET;
+    FB_SET.Bits.ERM_LRA = FB_ERM_LRA;
+    FB_SET.Bits.BRAKE_FACTOR = FB_BRAKEFACTOR;
+    FB_SET.Bits.LOOP_GAIN =FB_LOOPGAIN;
+    FB_SET.Bits.BEMF_GAIN = 0; /* auto-calibration populates this field*/
+    DRV_write(DRV_FEEDBACK_CTRL, (uint8_t) FB_SET.Byte);
+  DRVREG_CTRL1 C1_SET;
+    C1_SET.Bits.C1_DRIVE_TIME = DRIVE_TIME;
+    C1_SET.Bits.C1_AC_COUPLE = AC_COUPLE;
+    C1_SET.Bits.C1_STARTUP_BOOST = STARTUP_BOOST;
+    DRV_write(DRV_CTRL_1, (uint8_t) C1_SET.Byte);
+  DRVREG_CTRL2 C2_SET;
+    C2_SET.Bits.C2_BIDIR_INPUT = BIDIR_INPUT;
+    C2_SET.Bits.C2_BRAKE_STAB = BRAKE_STAB;
+    C2_SET.Bits.C2_SAMPLE_TIME = SAMPLE_TIME;
+    C2_SET.Bits.C2_BLANKING_TIME = BLANKING_TIME;
+    C2_SET.Bits.C2_IDISS_TIME = IDISS_TIME;
+    DRV_write(DRV_CTRL_2, (uint8_t) C2_SET.Byte);
+  DRVREG_CTRL3 C3_SET;
+    C3_SET.Bits.C3_LRA_OPEN_LOOP = LRA_OPEN_LOOP;
+    C3_SET.Bits.C3_N_PWM_ANALOG = N_PWM_ANALOG;
+    C3_SET.Bits.C3_LRA_DRIVE_MODE = LRA_DRIVE_MODE;
+    C3_SET.Bits.C3_DATA_FORMAT_RTO = DATA_FORMAT_RTO;
+    C3_SET.Bits.C3_SUPPLY_COMP_DIS = SUPPLY_COMP_DIS;
+    C3_SET.Bits.C3_ERM_OPEN_LOOP = ERM_OPEN_LOOP;
+    C3_SET.Bits.C3_NG_THRESH = NG_THRESH;
+    DRV_write(DRV_CTRL_3, (uint8_t) C3_SET.Byte);
+  DRVREG_CTRL4 C4_SET;
+    C4_SET.Bits.C4_ZC_DET_TIME = ZC_DET_TIME;
+    C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME;
+    DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte);
+  DRV_write(DRV_LIB_SELECTION,LIB_SELECTION);
+  //start autocalibration
+  DRV_write(DRV_GO, 0x01);
+
+  /* 0x00 sets DRV2605 out of standby and to use internal trigger
+   * 0x01 sets DRV2605 out of standby and to use external trigger */
+  DRV_write(DRV_MODE,0x00); 
+  
+  /* 0x06: LRA library */
+  DRV_write(DRV_WAVEFORM_SEQ_1, 0x01);
+
+  /* 0xB9: LRA, 4x brake factor, medium gain, 7.5x back EMF
+   * 0x39: ERM, 4x brake factor, medium gain, 1.365x back EMF */
+  
+  /* TODO: setup auto-calibration as part of initiation */
+
+}
+
+void DRV_pulse(uint8_t sequence)
+{
+  DRV_write(DRV_GO, 0x00);
+  DRV_write(DRV_WAVEFORM_SEQ_1, sequence);
+  DRV_write(DRV_GO, 0x01);
+}

drivers/haptic/DRV2605L.h

@@ -0,0 +1,394 @@
+/* Copyright 2018 ishtob
+ * Driver for DRV2605L written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "i2c_master.h"
+
+/* Initialization settings
+
+ * Feedback Control Settings */
+#ifndef FB_ERM_LRA
+#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
+#endif
+#ifndef FB_BRAKEFACTOR
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#endif
+#ifndef FB_LOOPGAIN
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+#endif
+
+#ifndef RATED_VOLTAGE
+#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#ifndef V_PEAK
+#define V_PEAK 2.8
+#endif
+#endif
+
+/* LRA specific settings */
+#if FB_ERM_LRA == 1
+#ifndef V_RMS
+#define V_RMS 2.0
+#endif
+#ifndef V_PEAK
+#define V_PEAK 2.1
+#endif
+#ifndef F_LRA
+#define F_LRA 205
+#endif
+#endif
+
+/* Library Selection */
+#ifndef LIB_SELECTION
+#if FB_ERM_LRA == 1
+#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+#else
+#define LIB_SELECTION 1
+#endif
+#endif
+
+/* Control 1 register settings */
+#ifndef DRIVE_TIME
+#define DRIVE_TIME 25
+#endif
+#ifndef AC_COUPLE
+#define AC_COUPLE 0
+#endif
+#ifndef STARTUP_BOOST
+#define STARTUP_BOOST 1
+#endif
+
+/* Control 2 Settings */
+#ifndef BIDIR_INPUT
+#define BIDIR_INPUT 1
+#endif
+#ifndef BRAKE_STAB
+#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
+#endif
+#ifndef SAMPLE_TIME 
+#define SAMPLE_TIME 3
+#endif
+#ifndef BLANKING_TIME
+#define BLANKING_TIME 1
+#endif
+#ifndef IDISS_TIME
+#define IDISS_TIME 1
+#endif
+
+/* Control 3 settings */
+#ifndef NG_THRESH
+#define NG_THRESH 2
+#endif
+#ifndef ERM_OPEN_LOOP
+#define ERM_OPEN_LOOP 1
+#endif
+#ifndef SUPPLY_COMP_DIS
+#define SUPPLY_COMP_DIS 0
+#endif
+#ifndef DATA_FORMAT_RTO
+#define DATA_FORMAT_RTO 0
+#endif
+#ifndef LRA_DRIVE_MODE
+#define LRA_DRIVE_MODE 0
+#endif
+#ifndef N_PWM_ANALOG
+#define N_PWM_ANALOG 0
+#endif
+#ifndef LRA_OPEN_LOOP
+#define LRA_OPEN_LOOP 0
+#endif
+
+/* Control 4 settings */
+#ifndef ZC_DET_TIME
+#define ZC_DET_TIME 0
+#endif
+#ifndef AUTO_CAL_TIME
+#define AUTO_CAL_TIME 3
+#endif
+
+/* register defines -------------------------------------------------------- */
+#define DRV2605L_BASE_ADDRESS       0x5A		/* DRV2605L Base address */
+#define DRV_STATUS                  0x00
+#define DRV_MODE                    0x01
+#define DRV_RTP_INPUT               0x02
+#define DRV_LIB_SELECTION           0x03
+#define DRV_WAVEFORM_SEQ_1          0x04
+#define DRV_WAVEFORM_SEQ_2          0x05
+#define DRV_WAVEFORM_SEQ_3          0x06
+#define DRV_WAVEFORM_SEQ_4          0x07
+#define DRV_WAVEFORM_SEQ_5          0x08
+#define DRV_WAVEFORM_SEQ_6          0x09
+#define DRV_WAVEFORM_SEQ_7          0x0A
+#define DRV_WAVEFORM_SEQ_8          0x0B
+#define DRV_GO                      0x0C
+#define DRV_OVERDRIVE_TIME_OFFSET   0x0D
+#define DRV_SUSTAIN_TIME_OFFSET_P   0x0E
+#define DRV_SUSTAIN_TIME_OFFSET_N   0x0F
+#define DRV_BRAKE_TIME_OFFSET       0x10
+#define DRV_AUDIO_2_VIBE_CTRL       0x11
+#define DRV_AUDIO_2_VIBE_MIN_IN     0x12
+#define DRV_AUDIO_2_VIBE_MAX_IN     0x13
+#define DRV_AUDIO_2_VIBE_MIN_OUTDRV	0x14
+#define DRV_AUDIO_2_VIBE_MAX_OUTDRV	0x15
+#define DRV_RATED_VOLT              0x16
+#define DRV_OVERDRIVE_CLAMP_VOLT    0x17
+#define DRV_AUTO_CALIB_COMP_RESULT  0x18 
+#define DRV_AUTO_CALIB_BEMF_RESULT  0x19
+#define DRV_FEEDBACK_CTRL           0x1A
+#define DRV_CTRL_1                  0x1B
+#define DRV_CTRL_2                  0x1C
+#define DRV_CTRL_3                  0x1D
+#define DRV_CTRL_4                  0x1E
+#define DRV_CTRL_5                  0x1F
+#define DRV_OPEN_LOOP_PERIOD        0x20
+#define DRV_VBAT_VOLT_MONITOR       0x21
+#define DRV_LRA_RESONANCE_PERIOD    0x22
+
+void DRV_init(void);
+void DRV_write(const uint8_t drv_register, const uint8_t settings);
+uint8_t DRV_read(const uint8_t regaddress);
+void DRV_pulse(const uint8_t sequence);
+
+
+typedef enum DRV_EFFECT{
+  clear_sequence      = 0,
+  strong_click 		    = 1,
+  strong_click_60 		= 2,
+  strong_click_30 		= 3,
+  sharp_click 		    = 4,
+  sharp_click_60      = 5,
+  sharp_click_30      = 6,
+  soft_bump           = 7,
+  soft_bump_60        = 8,
+  soft_bump_30        = 9,
+  dbl_click           = 10,
+  dbl_click_60        = 11,
+  trp_click           = 12,
+  soft_fuzz           = 13,
+  strong_buzz         = 14,
+  alert_750ms         = 15,
+  alert_1000ms        = 16,
+  strong_click1       = 17,
+  strong_click2_80    = 18,
+  strong_click3_60    = 19,
+  strong_click4_30    = 20,
+  medium_click1       = 21,
+  medium_click2_80    = 22,
+  medium_click3_60    = 23,
+  sharp_tick1         = 24,
+  sharp_tick2_80      = 25,
+  sharp_tick3_60      = 26,
+  sh_dblclick_str     = 27,
+  sh_dblclick_str_80  = 28,
+  sh_dblclick_str_60  = 29,
+  sh_dblclick_str_30  = 30,
+  sh_dblclick_med     = 31,
+  sh_dblclick_med_80  = 32,
+  sh_dblclick_med_60  = 33,
+  sh_dblsharp_tick    = 34,
+  sh_dblsharp_tick_80 = 35,
+  sh_dblsharp_tick_60 = 36,
+  lg_dblclick_str     = 37,
+  lg_dblclick_str_80  = 38,
+  lg_dblclick_str_60  = 39,
+  lg_dblclick_str_30  = 40,
+  lg_dblclick_med     = 41,
+  lg_dblclick_med_80  = 42,
+  lg_dblclick_med_60  = 43,
+  lg_dblsharp_tick    = 44,
+  lg_dblsharp_tick_80 = 45,
+  lg_dblsharp_tick_60 = 46,
+  buzz 					= 47,
+  buzz_80				= 48,
+  buzz_60				= 49,
+  buzz_40				= 50,
+  buzz_20				= 51,
+  pulsing_strong      = 52,
+  pulsing_strong_80   = 53,
+  pulsing_medium      = 54,
+  pulsing_medium_80   = 55,
+  pulsing_sharp       = 56,
+  pulsing_sharp_80    = 57,
+  transition_click		= 58,
+  transition_click_80 = 59,
+  transition_click_60	= 60,
+  transition_click_40	= 61,
+  transition_click_20	= 62,
+  transition_click_10	= 63,
+  transition_hum      = 64,
+  transition_hum_80   = 65,
+  transition_hum_60   = 66,
+  transition_hum_40   = 67,
+  transition_hum_20   = 68,
+  transition_hum_10   = 69,
+  transition_rampdown_long_smooth1  = 70,
+  transition_rampdown_long_smooth2  = 71,
+  transition_rampdown_med_smooth1   = 72,
+  transition_rampdown_med_smooth2   = 73,
+  transition_rampdown_short_smooth1 = 74,
+  transition_rampdown_short_smooth2 = 75,
+  transition_rampdown_long_sharp1   = 76,
+  transition_rampdown_long_sharp2   = 77,
+  transition_rampdown_med_sharp1    = 78,
+  transition_rampdown_med_sharp2    = 79,
+  transition_rampdown_short_sharp1  = 80,
+  transition_rampdown_short_sharp2  = 81,
+  transition_rampup_long_smooth1    = 82,
+  transition_rampup_long_smooth2    = 83,
+  transition_rampup_med_smooth1     = 84,
+  transition_rampup_med_smooth2     = 85,
+  transition_rampup_short_smooth1   = 86,
+  transition_rampup_short_smooth2   = 87,
+  transition_rampup_long_sharp1     = 88,
+  transition_rampup_long_sharp2     = 89,
+  transition_rampup_med_sharp1      = 90,
+  transition_rampup_med_sharp2      = 91,
+  transition_rampup_short_sharp1    = 92,
+  transition_rampup_short_sharp2    = 93,
+  transition_rampdown_long_smooth1_50  = 94,
+  transition_rampdown_long_smooth2_50  = 95,
+  transition_rampdown_med_smooth1_50   = 96,
+  transition_rampdown_med_smooth2_50   = 97,
+  transition_rampdown_short_smooth1_50 = 98,
+  transition_rampdown_short_smooth2_50 = 99,
+  transition_rampdown_long_sharp1_50   = 100,
+  transition_rampdown_long_sharp2_50   = 101,
+  transition_rampdown_med_sharp1_50    = 102,
+  transition_rampdown_med_sharp2_50    = 103,
+  transition_rampdown_short_sharp1_50  = 104,
+  transition_rampdown_short_sharp2_50  = 105,
+  transition_rampup_long_smooth1_50    = 106,
+  transition_rampup_long_smooth2_50    = 107,
+  transition_rampup_med_smooth1_50     = 108,
+  transition_rampup_med_smooth2_50     = 109,
+  transition_rampup_short_smooth1_50   = 110,
+  transition_rampup_short_smooth2_50   = 111,
+  transition_rampup_long_sharp1_50     = 112,
+  transition_rampup_long_sharp2_50     = 113,
+  transition_rampup_med_sharp1_50      = 114,
+  transition_rampup_med_sharp2_50      = 115,
+  transition_rampup_short_sharp1_50    = 116,
+  transition_rampup_short_sharp2_50    = 117,
+  long_buzz_for_programmatic_stopping  = 118,
+  smooth_hum1_50 = 119,
+  smooth_hum2_40 = 120,
+  smooth_hum3_30 = 121,
+  smooth_hum4_20 = 122,
+  smooth_hum5_10 = 123,
+} DRV_EFFECT;
+
+/* Register bit array unions */
+
+typedef union DRVREG_STATUS { /* register 0x00 */
+  uint8_t Byte;
+  struct {
+    uint8_t OC_DETECT   :1; /* set to 1 when overcurrent event is detected */
+    uint8_t OVER_TEMP   :1; /* set to 1 when device exceeds temp threshold */
+    uint8_t FB_STS      :1; /* set to 1 when feedback controller has timed out */
+    /* auto-calibration routine and diagnostic result
+     * result  |  auto-calibation  |      diagnostic       |
+     *   0     |      passed       | actuator func normal  |
+     *   1     |      failed       | actuator func fault*  |
+     * * actuator is not present or is shorted, timing out, or giving out–of-range back-EMF */
+    uint8_t DIAG_RESULT :1;
+    uint8_t             :1;
+    uint8_t DEVICE_ID   :3; /* Device IDs 3: DRV2605  4: DRV2604  5: DRV2604L  6: DRV2605L */
+  } Bits;
+} DRVREG_STATUS;
+
+typedef union DRVREG_MODE { /* register 0x01 */
+  uint8_t Byte;
+  struct {
+    uint8_t MODE        :3; /* Mode setting */
+    uint8_t             :3;
+    uint8_t STANDBY     :1; /* 0:standby 1:ready */
+  } Bits;
+} DRVREG_MODE;
+
+typedef union DRVREG_WAIT {
+  uint8_t Byte;
+  struct {
+    uint8_t WAIT_MODE   :1; /* Set to 1 to interpret as wait for next 7 bits x10ms */
+    uint8_t WAIT_TIME   :7;
+  } Bits;
+} DRVREG_WAIT;
+
+typedef union DRVREG_FBR{ /* register 0x1A */
+  uint8_t Byte;
+  struct {
+    uint8_t BEMF_GAIN    :2;
+    uint8_t LOOP_GAIN    :2;
+    uint8_t BRAKE_FACTOR :3;
+    uint8_t ERM_LRA      :1;
+  } Bits;
+} DRVREG_FBR;
+
+typedef union DRVREG_CTRL1{ /* register 0x1B */
+  uint8_t Byte;
+  struct {
+    uint8_t C1_DRIVE_TIME    :5;
+    uint8_t C1_AC_COUPLE     :1;
+    uint8_t                  :1;
+    uint8_t C1_STARTUP_BOOST :1;
+  } Bits;
+} DRVREG_CTRL1;
+
+typedef union DRVREG_CTRL2{ /* register 0x1C */
+  uint8_t Byte;
+  struct {
+    uint8_t C2_IDISS_TIME    :2;
+    uint8_t C2_BLANKING_TIME :2;
+    uint8_t C2_SAMPLE_TIME   :2;
+    uint8_t C2_BRAKE_STAB    :1;
+    uint8_t C2_BIDIR_INPUT   :1;
+  } Bits;
+} DRVREG_CTRL2;
+
+typedef union DRVREG_CTRL3{ /* register 0x1D */
+  uint8_t Byte;
+  struct {
+    uint8_t C3_LRA_OPEN_LOOP   :1;
+    uint8_t C3_N_PWM_ANALOG    :1;
+    uint8_t C3_LRA_DRIVE_MODE  :1;
+    uint8_t C3_DATA_FORMAT_RTO :1;
+    uint8_t C3_SUPPLY_COMP_DIS :1;
+    uint8_t C3_ERM_OPEN_LOOP   :1;
+    uint8_t C3_NG_THRESH       :2;
+  } Bits;
+} DRVREG_CTRL3;
+
+typedef union DRVREG_CTRL4{ /* register 0x1E */
+  uint8_t Byte;
+  struct {
+    uint8_t C4_OTP_PROGRAM     :1;
+    uint8_t                    :1;
+    uint8_t C4_OTP_STATUS      :1;
+    uint8_t                    :1;
+    uint8_t C4_AUTO_CAL_TIME   :2;
+    uint8_t C4_ZC_DET_TIME     :2;
+  } Bits;
+} DRVREG_CTRL4;
+
+typedef union DRVREG_CTRL5{ /* register 0x1F */
+  uint8_t Byte;
+  struct {
+    uint8_t C5_IDISS_TIME         :2;
+    uint8_t C5_BLANKING_TIME      :2;
+    uint8_t C5_PLAYBACK_INTERVAL  :1;
+    uint8_t C5_LRA_AUTO_OPEN_LOOP :1;
+    uint8_t C5_AUTO_OL_CNT        :2;
+  } Bits;
+} DRVREG_CTRL5;

drivers/qwiic/micro_oled.c

@@ -0,0 +1,691 @@
+/* Jim Lindblom @ SparkFun Electronics
+ * October 26, 2014
+ * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED
+ *
+ * Modified by:
+ * Emil Varughese @ Edwin Robotics Pvt. Ltd.
+ * July 27, 2015
+ * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+ *
+ * This code was heavily based around the MicroView library, written by GeekAmmo
+ * (https://github.com/geekammo/MicroView-Arduino-Library).
+ *
+ * Adapted for QMK by:
+ * Jack Humbert <jack.humb@gmail.com>
+ * October 11, 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "micro_oled.h"
+#include <stdlib.h>
+#include "util/font5x7.h"
+#include "util/font8x16.h"
+#include "string.h"
+
+#define TOTALFONTS 2
+const unsigned char * fonts_pointer[]= { font5x7, font8x16 };
+
+uint8_t foreColor,drawMode,fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY;
+uint16_t fontMapWidth;
+
+#define _BV(x) (1 << (x))
+#define swap(a, b) { uint8_t t = a; a = b; b = t; }
+
+uint8_t micro_oled_transfer_buffer[20];
+static uint8_t micro_oled_screen_current[LCDWIDTH*LCDWIDTH/8] = { 0 };
+
+/* LCD Memory organised in 64 horizontal pixel and 6 rows of byte
+   B  B .............B  -----
+   y  y .............y        \
+   t  t .............t         \
+   e  e .............e          \
+   0  1 .............63          \
+                                  \
+   D0 D0.............D0            \
+   D1 D1.............D1            / ROW 0
+   D2 D2.............D2           /
+   D3 D3.............D3          /
+   D4 D4.............D4         /
+   D5 D5.............D5        /
+   D6 D6.............D6       /
+   D7 D7.............D7  ----
+  */
+
+#if LCDWIDTH == 64
+  #if LCDWIDTH == 48
+static uint8_t micro_oled_screen_buffer[] = {
+// QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php
+//64x48 image
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
+0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
+0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60,
+0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE,
+0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF,
+0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7,
+0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06,
+0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00
+};
+  #endif
+#elif LCDWIDTH == 128
+  #if LCDHEIGHT == 32
+     static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {
+//128x32 qmk image
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xFC, 0xFC,
+0xE0, 0xF0, 0xFC, 0xE0, 0xE0, 0xFC, 0xE0, 0xE0, 0xFC, 0xFC,
+0xE0, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xF0, 0x10, 0x10, 0x30, 0xE0, 0x00, 0x00,
+0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00,
+0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x80,
+0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00,
+0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
+0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xB2, 0xB2, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0x03,
+0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF,
+0xFF, 0xB7, 0xB2, 0xB2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x1F, 0x02, 0x02, 0x03, 0x01, 0x00, 0x06, 0x1F, 0x10,
+0x10, 0x10, 0x1F, 0x06, 0x00, 0x03, 0x1E, 0x18, 0x0F, 0x01,
+0x0F, 0x18, 0x1E, 0x01, 0x00, 0x0F, 0x1F, 0x12, 0x02, 0x12,
+0x13, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x0E, 0x1F, 0x12,
+0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x1F,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x48, 0x4D, 0x4D, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFE, 0xF8, 0xF9, 0xF3, 0xF3, 0xC0, 0x80, 0xF3,
+0xF3, 0xF3, 0xF9, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xED,
+0x4D, 0x4D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0xC0, 0x00, 0x70, 0xC0,
+0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0C,
+0x04, 0x04, 0x04, 0x04, 0x1C, 0xF0, 0x00, 0x00, 0xFC, 0x0C,
+0x38, 0xE0, 0x00, 0x00, 0xC0, 0x38, 0x0C, 0xFC, 0x00, 0x00,
+0xFC, 0xFC, 0x60, 0x90, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x3F,
+0x3F, 0x07, 0x3F, 0x3F, 0x07, 0x0F, 0x3F, 0x07, 0x07, 0x3F,
+0x07, 0x07, 0x3F, 0x3F, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
+0x06, 0x04, 0x04, 0x07, 0x01, 0x00, 0x00, 0x13, 0x1E, 0x03,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x04, 0x04,
+0x04, 0x04, 0x07, 0x0D, 0x08, 0x00, 0x07, 0x00, 0x00, 0x01,
+0x07, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x07,
+0x00, 0x01, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00
+    };
+  #elif LCDHEIGHT == 64
+    static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0,
+0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00,
+0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xC0, 0xC0, 0xC0, 0xC0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFF,
+0x7F, 0x7E, 0xFE, 0xFF, 0xFF, 0xFE, 0xFE, 0x7F, 0x7F, 0xFE,
+0xFE, 0xFF, 0xFF, 0xFE, 0x7E, 0x7F, 0xFF, 0xFE, 0xFE, 0xFC,
+0xFC, 0xF8, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x88, 0x88, 0x88, 0xDD, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xDD, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFE, 0xF8, 0xF0, 0xF3, 0xF3, 0xE7, 0xE7, 0x00,
+0x00, 0xE7, 0xE7, 0xF3, 0xF3, 0xF0, 0xF8, 0xFE, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x99, 0x99, 0x99, 0x99, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0F, 0x1F, 0x3F,
+0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F,
+0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF,
+0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x01, 0x01, 0x01, 0x01, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x03, 0x01, 0x00,
+0x80, 0x03, 0x03, 0x00, 0x00, 0x01, 0x03, 0x00, 0x80, 0x01,
+0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xFF, 0x11, 0x11, 0x11, 0x0E, 0x00, 0x70,
+0x88, 0x04, 0x04, 0x04, 0xF8, 0x00, 0x00, 0x3C, 0xE0, 0xC0,
+0x38, 0x1C, 0xE0, 0x80, 0x70, 0x0C, 0x00, 0xF8, 0xAC, 0x24,
+0x24, 0x3C, 0x30, 0x00, 0x00, 0xFC, 0x0C, 0x04, 0x00, 0xF8,
+0xAC, 0x24, 0x24, 0x2C, 0x30, 0x00, 0x70, 0xDC, 0x04, 0x04,
+0x88, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+0x8C, 0x04, 0x04, 0xF8, 0x00, 0x04, 0x3C, 0xE0, 0x80, 0xF0,
+0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x83, 0x01, 0x01,
+0x01, 0x81, 0xFE, 0x3C, 0x00, 0x00, 0xFF, 0x03, 0x0E, 0x70,
+0xC0, 0xE0, 0x38, 0x06, 0x03, 0xFF, 0x00, 0x00, 0xFF, 0x18,
+0x38, 0x66, 0xC3, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
+0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x01,
+0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x04, 0x03,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x03, 0x02, 0x00, 0x01, 0x00, 0x00,
+0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+//TODO: generate bitmap of QMK logo here
+  #endif
+#else
+//catchall for custom screen szies
+    static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {0};
+#endif  
+
+
+
+void micro_oled_init(void) {
+
+  i2c_init();
+  i2c_start(I2C_ADDRESS_SA0_1);
+
+  // Display Init sequence for 64x48 OLED module
+  send_command(DISPLAYOFF);      // 0xAE
+
+  send_command(SETDISPLAYCLOCKDIV);  // 0xD5
+  send_command(0x80);          // the suggested ratio 0x80
+
+  send_command(SETMULTIPLEX);      // 0xA8
+  send_command(LCDHEIGHT - 1);
+
+  send_command(SETDISPLAYOFFSET);    // 0xD3
+  send_command(0x00);         // no offset
+
+  send_command(SETSTARTLINE | 0x00);  // line #0
+
+  send_command(CHARGEPUMP);      // enable charge pump
+  send_command(0x14);
+
+  send_command(NORMALDISPLAY);     // 0xA6
+  send_command(DISPLAYALLONRESUME);  // 0xA4
+
+//display at regular orientation
+  send_command(SEGREMAP | 0x1);
+  send_command(COMSCANDEC);
+
+//rotate display 180
+#ifdef micro_oled_rotate_180
+  send_command(SEGREMAP);
+  send_command(COMSCANINC);
+#endif
+
+  send_command(MEMORYMODE);
+  send_command(0x10);
+
+  send_command(SETCOMPINS);      // 0xDA
+if (LCDHEIGHT > 32) {
+  send_command(0x12);
+} else {
+  send_command(0x02);
+}
+  send_command(SETCONTRAST);     // 0x81
+  send_command(0x8F);
+
+  send_command(SETPRECHARGE);      // 0xd9
+  send_command(0xF1);
+
+  send_command(SETVCOMDESELECT);     // 0xDB
+  send_command(0x40);
+
+  send_command(DISPLAYON);       //--turn on oled panel
+  clear_screen();           // Erase hardware memory inside the OLED controller to avoid random data in memory.
+  send_buffer();
+}
+
+void send_command(uint8_t command) {
+  micro_oled_transfer_buffer[0] = I2C_COMMAND;
+  micro_oled_transfer_buffer[1] = command;
+  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
+}
+
+void send_data(uint8_t data) {
+  micro_oled_transfer_buffer[0] = I2C_DATA;
+  micro_oled_transfer_buffer[1] = data;
+  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
+}
+
+/** \brief Set SSD1306 page address.
+    Send page address command and address to the SSD1306 OLED controller.
+*/
+void set_page_address(uint8_t address) {
+  address = (0xB0 | address);
+  send_command(address);
+}
+
+/** \brief Set SSD1306 column address.
+    Send column address command and address to the SSD1306 OLED controller.
+*/
+void set_column_address(uint8_t address) {
+  send_command( ( 0x10 | (address >> 4) ) + ((128 - LCDWIDTH) >> 8) );
+  send_command( 0x0F & address );
+}
+
+/** \brief Clear SSD1306's memory.
+    To clear GDRAM inside the LCD controller.
+*/
+void clear_screen(void) {
+  for (int i=0;i<8; i++) {
+    set_page_address(i);
+    set_column_address(0);
+    for (int j=0; j<0x80; j++) {
+      send_data(0);
+    }
+  }
+}
+
+/** \brief Clear SSD1306's memory.
+    To clear GDRAM inside the LCD controller.
+*/
+void clear_buffer(void) {
+//384
+  memset(micro_oled_screen_buffer, 0, LCDWIDTH*LCDWIDTH/8);
+}
+
+/** \brief Invert display.
+    The PIXEL_ON color of the display will turn to PIXEL_OFF and the PIXEL_OFF will turn to PIXEL_ON.
+*/
+void invert_screen(bool invert) {
+  if (invert) {
+    send_command(INVERTDISPLAY);
+  } else {
+    send_command(NORMALDISPLAY);
+  }
+}
+
+/** \brief Set contrast.
+    OLED contract value from 0 to 255. Note: Contrast level is not very obvious.
+*/
+void set_contrast(uint8_t contrast) {
+  send_command(SETCONTRAST);     // 0x81
+  send_command(contrast);
+}
+
+/** \brief Transfer display buffer.
+  Sends the updated buffer to the controller - the current status is checked before to save i2c exectution time
+*/
+void send_buffer(void) {
+  uint8_t i, j;
+
+  uint8_t page_addr = 0xFF;
+  for (i = 0; i < LCDHEIGHT/8; i++) {
+    uint8_t col_addr = 0xFF;
+    for (j = 0; j < LCDWIDTH; j++) {
+      if (micro_oled_screen_buffer[i*LCDWIDTH+j] != micro_oled_screen_current[i*LCDWIDTH+j]) {
+        if (page_addr != i) {
+          set_page_address(i);
+        }
+        if (col_addr != j) {
+          set_column_address(j);
+        }
+        send_data(micro_oled_screen_buffer[i*LCDWIDTH+j]);
+        micro_oled_screen_current[i*LCDWIDTH+j] = micro_oled_screen_buffer[i*LCDWIDTH+j];
+        col_addr = j + 1;
+      }
+    }
+  }
+}
+
+/** \brief Draw pixel with color and mode.
+  Draw color pixel in the screen buffer's x,y position with NORM or XOR draw mode.
+*/
+void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode) {
+  if ((x<0) ||  (x>=LCDWIDTH) || (y<0) || (y>=LCDHEIGHT))
+    return;
+
+  if (mode == XOR) {
+    if (color == PIXEL_ON)
+      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] ^= _BV((y%8));
+  } else {
+    if (color == PIXEL_ON)
+      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] |= _BV((y%8));
+    else
+      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] &= ~_BV((y%8));
+  }
+}
+
+/** \brief Draw line with color and mode.
+Draw line using color and mode from x0,y0 to x1,y1 of the screen buffer.
+*/
+void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode) {
+  uint8_t steep = abs(y1 - y0) > abs(x1 - x0);
+  if (steep) {
+    swap(x0, y0);
+    swap(x1, y1);
+  }
+
+  if (x0 > x1) {
+    swap(x0, x1);
+    swap(y0, y1);
+  }
+
+  uint8_t dx, dy;
+  dx = x1 - x0;
+  dy = abs(y1 - y0);
+
+  int8_t err = dx / 2;
+  int8_t ystep;
+
+  if (y0 < y1) {
+    ystep = 1;
+  } else {
+    ystep = -1;}
+
+  for (; x0<x1; x0++) {
+    if (steep) {
+      draw_pixel(y0, x0, color, mode);
+    } else {
+      draw_pixel(x0, y0, color, mode);
+    }
+    err -= dy;
+    if (err < 0) {
+      y0 += ystep;
+      err += dx;
+    }
+  }
+}
+
+/** \brief Draw horizontal line with color and mode.
+Draw horizontal line using color and mode from x,y to x+width,y of the screen buffer.
+*/
+void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) {
+  draw_line(x,y,x+width,y,color,mode);
+}
+
+/** \brief Draw vertical line.
+Draw vertical line using current fore color and current draw mode from x,y to x,y+height of the screen buffer.
+*/
+void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) {
+  draw_line(x,y,x,y+height,color,mode);
+}
+
+/** \brief Draw rectangle with color and mode.
+Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  uint8_t tempHeight;
+
+  draw_line_hori(x,y, width, color, mode);
+  draw_line_hori(x,y+height-1, width, color, mode);
+
+  tempHeight=height-2;
+
+  // skip drawing vertical lines to avoid overlapping of pixel that will
+  // affect XOR plot if no pixel in between horizontal lines
+  if (tempHeight<1) return;
+
+  draw_line_vert(x,y+1, tempHeight, color, mode);
+  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
+}
+
+/** \brief Draw rectangle with color and mode.
+Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  uint8_t tempHeight;
+
+  draw_line_hori(x+1,y, width-2, color, mode);
+  draw_line_hori(x+1,y+height-1, width-2, color, mode);
+
+  tempHeight=height-2;
+
+  // skip drawing vertical lines to avoid overlapping of pixel that will
+  // affect XOR plot if no pixel in between horizontal lines
+  if (tempHeight<1) return;
+
+  draw_line_vert(x,y+1, tempHeight, color, mode);
+  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
+}
+
+/** \brief Draw filled rectangle with color and mode.
+Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
+  for (int i=x; i<x+width;i++) {
+    draw_line_vert(i,y, height, color, mode);
+  }
+}
+
+/** \brief Draw filled rectangle with color and mode.
+Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
+  for (int i=x; i<x+width;i++) {
+    if (i == x || i == (x + width - 1))
+      draw_line_vert(i, y+1, height-2, color, mode);
+    else
+      draw_line_vert(i, y, height, color, mode);
+  }
+}
+
+/** \brief Draw character with color and mode.
+  Draw character c using color and draw mode at x,y.
+*/
+void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font) {
+  // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels
+
+  uint8_t rowsToDraw,row, tempC;
+  uint8_t i,j,temp;
+  uint16_t charPerBitmapRow,charColPositionOnBitmap,charRowPositionOnBitmap,charBitmapStartPosition;
+
+  if ((font>=TOTALFONTS) || (font<0))
+    return;
+
+  uint8_t fontType = font;
+  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
+  uint8_t fontHeight = pgm_read_byte(fonts_pointer[fontType]+1);
+  uint8_t fontStartChar = pgm_read_byte(fonts_pointer[fontType]+2);
+  uint8_t fontTotalChar = pgm_read_byte(fonts_pointer[fontType]+3);
+  uint16_t fontMapWidth = (pgm_read_byte(fonts_pointer[fontType]+4)*100)+pgm_read_byte(fonts_pointer[fontType]+5); // two bytes values into integer 16
+
+  if ((c<fontStartChar) || (c>(fontStartChar+fontTotalChar-1)))   // no bitmap for the required c
+    return;
+
+  tempC=c-fontStartChar;
+
+  // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn
+  rowsToDraw=fontHeight/8;  // 8 is LCD's page size, see SSD1306 datasheet
+  if (rowsToDraw<=1) rowsToDraw=1;
+
+  // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw
+  if (rowsToDraw==1) {
+    for  (i=0;i<fontWidth+1;i++) {
+      if (i==fontWidth) // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5
+      temp=0;
+      else
+      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(tempC*fontWidth)+i);
+
+      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
+        if (temp & 0x1) {
+          draw_pixel(x+i, y+j, color,mode);
+        }
+        else {
+          draw_pixel(x+i, y+j, !color,mode);
+        }
+
+        temp >>=1;
+      }
+    }
+    return;
+  }
+
+  // font height over 8 bit
+  // take character "0" ASCII 48 as example
+  charPerBitmapRow = fontMapWidth/fontWidth;  // 256/8 =32 char per row
+  charColPositionOnBitmap = tempC % charPerBitmapRow;  // =16
+  charRowPositionOnBitmap = (int)(tempC/charPerBitmapRow); // =1
+  charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight/8)) + (charColPositionOnBitmap * fontWidth) ;
+
+  // each row on LCD is 8 bit height (see datasheet for explanation)
+  for(row=0;row<rowsToDraw;row++) {
+    for (i=0; i<fontWidth;i++) {
+      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(charBitmapStartPosition+i+(row*fontMapWidth)));
+      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
+        if (temp & 0x1) {
+          draw_pixel(x+i,y+j+(row*8), color, mode);
+        }
+        else {
+          draw_pixel(x+i,y+j+(row*8), !color, mode);
+        }
+        temp >>=1;
+      }
+    }
+  }
+
+}
+
+void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font) {
+
+  if ((font>=TOTALFONTS) || (font<0))
+    return;
+
+  uint8_t fontType = font;
+  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
+
+  uint8_t cur_x = x;
+  for (int i = 0; i < strlen(string); i++) {
+    draw_char(cur_x, y, string[i], color, mode, font);
+    cur_x += fontWidth + 1;
+  }
+
+}

drivers/qwiic/micro_oled.h

@@ -0,0 +1,134 @@
+/* Jim Lindblom @ SparkFun Electronics
+ * October 26, 2014
+ * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED
+ *
+ * Modified by:
+ * Emil Varughese @ Edwin Robotics Pvt. Ltd.
+ * July 27, 2015
+ * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+ *
+ * This code was heavily based around the MicroView library, written by GeekAmmo
+ * (https://github.com/geekammo/MicroView-Arduino-Library).
+ *
+ * Adapted for QMK by:
+ * Jack Humbert <jack.humb@gmail.com>
+ * October 11, 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "qwiic.h"
+
+void micro_oled_init(void);
+
+void send_command(uint8_t command);
+void send_data(uint8_t data);
+void set_page_address(uint8_t address);
+void set_column_address(uint8_t address);
+void clear_screen(void);
+void clear_buffer(void);
+void send_buffer(void);
+void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode);
+void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode);
+void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode);
+void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode);
+void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font);
+void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font);
+
+#define I2C_ADDRESS_SA0_0 0b0111100
+#ifndef I2C_ADDRESS_SA0_1
+#define I2C_ADDRESS_SA0_1 0b0111101
+#endif
+#define I2C_COMMAND 0x00
+#define I2C_DATA 0x40
+#define PIXEL_OFF 0
+#define PIXEL_ON  1
+
+#ifndef LCDWIDTH
+#define LCDWIDTH      64
+#endif
+#ifndef LCDWIDTH
+#define LCDHEIGHT     48
+#endif
+#define FONTHEADERSIZE    6
+
+#define NORM        0
+#define XOR         1
+
+#define PAGE        0
+#define ALL         1
+
+#define WIDGETSTYLE0      0
+#define WIDGETSTYLE1      1
+#define WIDGETSTYLE2      2
+
+#define SETCONTRAST     0x81
+#define DISPLAYALLONRESUME  0xA4
+#define DISPLAYALLON    0xA5
+#define NORMALDISPLAY     0xA6
+#define INVERTDISPLAY     0xA7
+#define DISPLAYOFF      0xAE
+#define DISPLAYON       0xAF
+#define SETDISPLAYOFFSET  0xD3
+#define SETCOMPINS      0xDA
+#define SETVCOMDESELECT   0xDB
+#define SETDISPLAYCLOCKDIV  0xD5
+#define SETPRECHARGE    0xD9
+#define SETMULTIPLEX    0xA8
+#define SETLOWCOLUMN    0x00
+#define SETHIGHCOLUMN     0x10
+#define SETSTARTLINE    0x40
+#define MEMORYMODE      0x20
+#define COMSCANINC      0xC0
+#define COMSCANDEC      0xC8
+#define SEGREMAP      0xA0
+#define CHARGEPUMP      0x8D
+#define EXTERNALVCC     0x01
+#define SWITCHCAPVCC    0x02
+
+// Scroll
+#define ACTIVATESCROLL          0x2F
+#define DEACTIVATESCROLL        0x2E
+#define SETVERTICALSCROLLAREA       0xA3
+#define RIGHTHORIZONTALSCROLL       0x26
+#define LEFT_HORIZONTALSCROLL       0x27
+#define VERTICALRIGHTHORIZONTALSCROLL 0x29
+#define VERTICALLEFTHORIZONTALSCROLL  0x2A
+
+typedef enum CMD {
+  CMD_CLEAR,      //0
+  CMD_INVERT,     //1
+  CMD_CONTRAST,   //2
+  CMD_DISPLAY,    //3
+  CMD_SETCURSOR,    //4
+  CMD_PIXEL,      //5
+  CMD_LINE,     //6
+  CMD_LINEH,      //7
+  CMD_LINEV,      //8
+  CMD_RECT,     //9
+  CMD_RECTFILL,   //10
+  CMD_CIRCLE,     //11
+  CMD_CIRCLEFILL,   //12
+  CMD_DRAWCHAR,   //13
+  CMD_DRAWBITMAP,   //14
+  CMD_GETLCDWIDTH,  //15
+  CMD_GETLCDHEIGHT, //16
+  CMD_SETCOLOR,   //17
+  CMD_SETDRAWMODE   //18
+} commCommand_t;

drivers/qwiic/qwiic.c

@@ -0,0 +1,31 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qwiic.h"
+
+void qwiic_init(void) {
+  #ifdef QWIIC_JOYSTIIC_ENABLE
+    joystiic_init();
+  #endif
+  #ifdef QWIIC_MICRO_OLED_ENABLE
+    micro_oled_init();
+  #endif
+}
+
+void qwiic_task(void) {
+  #ifdef QWIIC_JOYSTIIC_ENABLE
+    joystiic_task();
+  #endif
+}

drivers/qwiic/qwiic.h

@@ -0,0 +1,28 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "i2c_master.h"
+
+#ifdef QWIIC_JOYSTIIC_ENABLE
+  #include "joystiic.h"
+#endif
+#ifdef QWIIC_MICRO_OLED_ENABLE
+  #include "micro_oled.h"
+#endif
+
+void qwiic_init(void);
+void qwiic_task(void);

drivers/qwiic/qwiic.mk

@@ -0,0 +1,18 @@
+ifneq ($(strip $(QWIIC_ENABLE)),)
+  COMMON_VPATH += $(DRIVER_PATH)/qwiic
+  OPT_DEFS += -DQWIIC_ENABLE
+  SRC += qwiic.c
+  ifeq ($(filter "i2c_master.c", $(SRC)),)
+    SRC += i2c_master.c
+  endif
+endif
+
+ifneq ($(filter JOYSTIIC, $(QWIIC_ENABLE)),)
+  OPT_DEFS += -DQWIIC_JOYSTIIC_ENABLE
+  SRC += joystiic.c
+endif
+
+ifneq ($(filter MICRO_OLED, $(QWIIC_ENABLE)),)
+  OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE
+  SRC += micro_oled.c
+endif

drivers/qwiic/util/font5x7.h

@@ -0,0 +1,288 @@
+/******************************************************************************
+font5x7.h
+Definition for small font
+
+This file was imported from the MicroView library, written by GeekAmmo
+(https://github.com/geekammo/MicroView-Arduino-Library), and released under
+the terms of the GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Modified by:
+Emil Varughese @ Edwin Robotics Pvt. Ltd.
+July 27, 2015
+https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+
+******************************************************************************/
+#pragma once
+
+#include "progmem.h"
+
+// Standard ASCII 5x7 font
+static const unsigned char font5x7[] PROGMEM = {
+    // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
+    5,8,0,255,12,75,
+    0x00, 0x00, 0x00, 0x00, 0x00,
+    0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
+    0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
+    0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
+    0x18, 0x3C, 0x7E, 0x3C, 0x18,
+    0x1C, 0x57, 0x7D, 0x57, 0x1C,
+    0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
+    0x00, 0x18, 0x3C, 0x18, 0x00,
+    0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
+    0x00, 0x18, 0x24, 0x18, 0x00,
+    0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
+    0x30, 0x48, 0x3A, 0x06, 0x0E,
+    0x26, 0x29, 0x79, 0x29, 0x26,
+    0x40, 0x7F, 0x05, 0x05, 0x07,
+    0x40, 0x7F, 0x05, 0x25, 0x3F,
+    0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
+    0x7F, 0x3E, 0x1C, 0x1C, 0x08,
+    0x08, 0x1C, 0x1C, 0x3E, 0x7F,
+    0x14, 0x22, 0x7F, 0x22, 0x14,
+    0x5F, 0x5F, 0x00, 0x5F, 0x5F,
+    0x06, 0x09, 0x7F, 0x01, 0x7F,
+    0x00, 0x66, 0x89, 0x95, 0x6A,
+    0x60, 0x60, 0x60, 0x60, 0x60,
+    0x94, 0xA2, 0xFF, 0xA2, 0x94,
+    0x08, 0x04, 0x7E, 0x04, 0x08,
+    0x10, 0x20, 0x7E, 0x20, 0x10,
+    0x08, 0x08, 0x2A, 0x1C, 0x08,
+    0x08, 0x1C, 0x2A, 0x08, 0x08,
+    0x1E, 0x10, 0x10, 0x10, 0x10,
+    0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
+    0x30, 0x38, 0x3E, 0x38, 0x30,
+    0x06, 0x0E, 0x3E, 0x0E, 0x06,
+    0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x5F, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x07, 0x00,
+    0x14, 0x7F, 0x14, 0x7F, 0x14,
+    0x24, 0x2A, 0x7F, 0x2A, 0x12,
+    0x23, 0x13, 0x08, 0x64, 0x62,
+    0x36, 0x49, 0x56, 0x20, 0x50,
+    0x00, 0x08, 0x07, 0x03, 0x00,
+    0x00, 0x1C, 0x22, 0x41, 0x00,
+    0x00, 0x41, 0x22, 0x1C, 0x00,
+    0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
+    0x08, 0x08, 0x3E, 0x08, 0x08,
+    0x00, 0x80, 0x70, 0x30, 0x00,
+    0x08, 0x08, 0x08, 0x08, 0x08,
+    0x00, 0x00, 0x60, 0x60, 0x00,
+    0x20, 0x10, 0x08, 0x04, 0x02,
+    0x3E, 0x51, 0x49, 0x45, 0x3E,
+    0x00, 0x42, 0x7F, 0x40, 0x00,
+    0x72, 0x49, 0x49, 0x49, 0x46,
+    0x21, 0x41, 0x49, 0x4D, 0x33,
+    0x18, 0x14, 0x12, 0x7F, 0x10,
+    0x27, 0x45, 0x45, 0x45, 0x39,
+    0x3C, 0x4A, 0x49, 0x49, 0x31,
+    0x41, 0x21, 0x11, 0x09, 0x07,
+    0x36, 0x49, 0x49, 0x49, 0x36,
+    0x46, 0x49, 0x49, 0x29, 0x1E,
+    0x00, 0x00, 0x14, 0x00, 0x00,
+    0x00, 0x40, 0x34, 0x00, 0x00,
+    0x00, 0x08, 0x14, 0x22, 0x41,
+    0x14, 0x14, 0x14, 0x14, 0x14,
+    0x00, 0x41, 0x22, 0x14, 0x08,
+    0x02, 0x01, 0x59, 0x09, 0x06,
+    0x3E, 0x41, 0x5D, 0x59, 0x4E,
+    0x7C, 0x12, 0x11, 0x12, 0x7C,
+    0x7F, 0x49, 0x49, 0x49, 0x36,
+    0x3E, 0x41, 0x41, 0x41, 0x22,
+    0x7F, 0x41, 0x41, 0x41, 0x3E,
+    0x7F, 0x49, 0x49, 0x49, 0x41,
+    0x7F, 0x09, 0x09, 0x09, 0x01,
+    0x3E, 0x41, 0x41, 0x51, 0x73,
+    0x7F, 0x08, 0x08, 0x08, 0x7F,
+    0x00, 0x41, 0x7F, 0x41, 0x00,
+    0x20, 0x40, 0x41, 0x3F, 0x01,
+    0x7F, 0x08, 0x14, 0x22, 0x41,
+    0x7F, 0x40, 0x40, 0x40, 0x40,
+    0x7F, 0x02, 0x1C, 0x02, 0x7F,
+    0x7F, 0x04, 0x08, 0x10, 0x7F,
+    0x3E, 0x41, 0x41, 0x41, 0x3E,
+    0x7F, 0x09, 0x09, 0x09, 0x06,
+    0x3E, 0x41, 0x51, 0x21, 0x5E,
+    0x7F, 0x09, 0x19, 0x29, 0x46,
+    0x26, 0x49, 0x49, 0x49, 0x32,
+    0x03, 0x01, 0x7F, 0x01, 0x03,
+    0x3F, 0x40, 0x40, 0x40, 0x3F,
+    0x1F, 0x20, 0x40, 0x20, 0x1F,
+    0x3F, 0x40, 0x38, 0x40, 0x3F,
+    0x63, 0x14, 0x08, 0x14, 0x63,
+    0x03, 0x04, 0x78, 0x04, 0x03,
+    0x61, 0x59, 0x49, 0x4D, 0x43,
+    0x00, 0x7F, 0x41, 0x41, 0x41,
+    0x02, 0x04, 0x08, 0x10, 0x20,
+    0x00, 0x41, 0x41, 0x41, 0x7F,
+    0x04, 0x02, 0x01, 0x02, 0x04,
+    0x40, 0x40, 0x40, 0x40, 0x40,
+    0x00, 0x03, 0x07, 0x08, 0x00,
+    0x20, 0x54, 0x54, 0x78, 0x40,
+    0x7F, 0x28, 0x44, 0x44, 0x38,
+    0x38, 0x44, 0x44, 0x44, 0x28,
+    0x38, 0x44, 0x44, 0x28, 0x7F,
+    0x38, 0x54, 0x54, 0x54, 0x18,
+    0x00, 0x08, 0x7E, 0x09, 0x02,
+    0x18, 0xA4, 0xA4, 0x9C, 0x78,
+    0x7F, 0x08, 0x04, 0x04, 0x78,
+    0x00, 0x44, 0x7D, 0x40, 0x00,
+    0x20, 0x40, 0x40, 0x3D, 0x00,
+    0x7F, 0x10, 0x28, 0x44, 0x00,
+    0x00, 0x41, 0x7F, 0x40, 0x00,
+    0x7C, 0x04, 0x78, 0x04, 0x78,
+    0x7C, 0x08, 0x04, 0x04, 0x78,
+    0x38, 0x44, 0x44, 0x44, 0x38,
+    0xFC, 0x18, 0x24, 0x24, 0x18,
+    0x18, 0x24, 0x24, 0x18, 0xFC,
+    0x7C, 0x08, 0x04, 0x04, 0x08,
+    0x48, 0x54, 0x54, 0x54, 0x24,
+    0x04, 0x04, 0x3F, 0x44, 0x24,
+    0x3C, 0x40, 0x40, 0x20, 0x7C,
+    0x1C, 0x20, 0x40, 0x20, 0x1C,
+    0x3C, 0x40, 0x30, 0x40, 0x3C,
+    0x44, 0x28, 0x10, 0x28, 0x44,
+    0x4C, 0x90, 0x90, 0x90, 0x7C,
+    0x44, 0x64, 0x54, 0x4C, 0x44,
+    0x00, 0x08, 0x36, 0x41, 0x00,
+    0x00, 0x00, 0x77, 0x00, 0x00,
+    0x00, 0x41, 0x36, 0x08, 0x00,
+    0x02, 0x01, 0x02, 0x04, 0x02,
+    0x3C, 0x26, 0x23, 0x26, 0x3C,
+    0x1E, 0xA1, 0xA1, 0x61, 0x12,
+    0x3A, 0x40, 0x40, 0x20, 0x7A,
+    0x38, 0x54, 0x54, 0x55, 0x59,
+    0x21, 0x55, 0x55, 0x79, 0x41,
+    0x21, 0x54, 0x54, 0x78, 0x41,
+    0x21, 0x55, 0x54, 0x78, 0x40,
+    0x20, 0x54, 0x55, 0x79, 0x40,
+    0x0C, 0x1E, 0x52, 0x72, 0x12,
+    0x39, 0x55, 0x55, 0x55, 0x59,
+    0x39, 0x54, 0x54, 0x54, 0x59,
+    0x39, 0x55, 0x54, 0x54, 0x58,
+    0x00, 0x00, 0x45, 0x7C, 0x41,
+    0x00, 0x02, 0x45, 0x7D, 0x42,
+    0x00, 0x01, 0x45, 0x7C, 0x40,
+    0xF0, 0x29, 0x24, 0x29, 0xF0,
+    0xF0, 0x28, 0x25, 0x28, 0xF0,
+    0x7C, 0x54, 0x55, 0x45, 0x00,
+    0x20, 0x54, 0x54, 0x7C, 0x54,
+    0x7C, 0x0A, 0x09, 0x7F, 0x49,
+    0x32, 0x49, 0x49, 0x49, 0x32,
+    0x32, 0x48, 0x48, 0x48, 0x32,
+    0x32, 0x4A, 0x48, 0x48, 0x30,
+    0x3A, 0x41, 0x41, 0x21, 0x7A,
+    0x3A, 0x42, 0x40, 0x20, 0x78,
+    0x00, 0x9D, 0xA0, 0xA0, 0x7D,
+    0x39, 0x44, 0x44, 0x44, 0x39,
+    0x3D, 0x40, 0x40, 0x40, 0x3D,
+    0x3C, 0x24, 0xFF, 0x24, 0x24,
+    0x48, 0x7E, 0x49, 0x43, 0x66,
+    0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
+    0xFF, 0x09, 0x29, 0xF6, 0x20,
+    0xC0, 0x88, 0x7E, 0x09, 0x03,
+    0x20, 0x54, 0x54, 0x79, 0x41,
+    0x00, 0x00, 0x44, 0x7D, 0x41,
+    0x30, 0x48, 0x48, 0x4A, 0x32,
+    0x38, 0x40, 0x40, 0x22, 0x7A,
+    0x00, 0x7A, 0x0A, 0x0A, 0x72,
+    0x7D, 0x0D, 0x19, 0x31, 0x7D,
+    0x26, 0x29, 0x29, 0x2F, 0x28,
+    0x26, 0x29, 0x29, 0x29, 0x26,
+    0x30, 0x48, 0x4D, 0x40, 0x20,
+    0x38, 0x08, 0x08, 0x08, 0x08,
+    0x08, 0x08, 0x08, 0x08, 0x38,
+    0x2F, 0x10, 0xC8, 0xAC, 0xBA,
+    0x2F, 0x10, 0x28, 0x34, 0xFA,
+    0x00, 0x00, 0x7B, 0x00, 0x00,
+    0x08, 0x14, 0x2A, 0x14, 0x22,
+    0x22, 0x14, 0x2A, 0x14, 0x08,
+    0xAA, 0x00, 0x55, 0x00, 0xAA,
+    0xAA, 0x55, 0xAA, 0x55, 0xAA,
+    0x00, 0x00, 0x00, 0xFF, 0x00,
+    0x10, 0x10, 0x10, 0xFF, 0x00,
+    0x14, 0x14, 0x14, 0xFF, 0x00,
+    0x10, 0x10, 0xFF, 0x00, 0xFF,
+    0x10, 0x10, 0xF0, 0x10, 0xF0,
+    0x14, 0x14, 0x14, 0xFC, 0x00,
+    0x14, 0x14, 0xF7, 0x00, 0xFF,
+    0x00, 0x00, 0xFF, 0x00, 0xFF,
+    0x14, 0x14, 0xF4, 0x04, 0xFC,
+    0x14, 0x14, 0x17, 0x10, 0x1F,
+    0x10, 0x10, 0x1F, 0x10, 0x1F,
+    0x14, 0x14, 0x14, 0x1F, 0x00,
+    0x10, 0x10, 0x10, 0xF0, 0x00,
+    0x00, 0x00, 0x00, 0x1F, 0x10,
+    0x10, 0x10, 0x10, 0x1F, 0x10,
+    0x10, 0x10, 0x10, 0xF0, 0x10,
+    0x00, 0x00, 0x00, 0xFF, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0xFF, 0x10,
+    0x00, 0x00, 0x00, 0xFF, 0x14,
+    0x00, 0x00, 0xFF, 0x00, 0xFF,
+    0x00, 0x00, 0x1F, 0x10, 0x17,
+    0x00, 0x00, 0xFC, 0x04, 0xF4,
+    0x14, 0x14, 0x17, 0x10, 0x17,
+    0x14, 0x14, 0xF4, 0x04, 0xF4,
+    0x00, 0x00, 0xFF, 0x00, 0xF7,
+    0x14, 0x14, 0x14, 0x14, 0x14,
+    0x14, 0x14, 0xF7, 0x00, 0xF7,
+    0x14, 0x14, 0x14, 0x17, 0x14,
+    0x10, 0x10, 0x1F, 0x10, 0x1F,
+    0x14, 0x14, 0x14, 0xF4, 0x14,
+    0x10, 0x10, 0xF0, 0x10, 0xF0,
+    0x00, 0x00, 0x1F, 0x10, 0x1F,
+    0x00, 0x00, 0x00, 0x1F, 0x14,
+    0x00, 0x00, 0x00, 0xFC, 0x14,
+    0x00, 0x00, 0xF0, 0x10, 0xF0,
+    0x10, 0x10, 0xFF, 0x10, 0xFF,
+    0x14, 0x14, 0x14, 0xFF, 0x14,
+    0x10, 0x10, 0x10, 0x1F, 0x00,
+    0x00, 0x00, 0x00, 0xF0, 0x10,
+    0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+    0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+    0xFF, 0xFF, 0xFF, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xFF, 0xFF,
+    0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
+    0x38, 0x44, 0x44, 0x38, 0x44,
+    0x7C, 0x2A, 0x2A, 0x3E, 0x14,
+    0x7E, 0x02, 0x02, 0x06, 0x06,
+    0x02, 0x7E, 0x02, 0x7E, 0x02,
+    0x63, 0x55, 0x49, 0x41, 0x63,
+    0x38, 0x44, 0x44, 0x3C, 0x04,
+    0x40, 0x7E, 0x20, 0x1E, 0x20,
+    0x06, 0x02, 0x7E, 0x02, 0x02,
+    0x99, 0xA5, 0xE7, 0xA5, 0x99,
+    0x1C, 0x2A, 0x49, 0x2A, 0x1C,
+    0x4C, 0x72, 0x01, 0x72, 0x4C,
+    0x30, 0x4A, 0x4D, 0x4D, 0x30,
+    0x30, 0x48, 0x78, 0x48, 0x30,
+    0xBC, 0x62, 0x5A, 0x46, 0x3D,
+    0x3E, 0x49, 0x49, 0x49, 0x00,
+    0x7E, 0x01, 0x01, 0x01, 0x7E,
+    0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
+    0x44, 0x44, 0x5F, 0x44, 0x44,
+    0x40, 0x51, 0x4A, 0x44, 0x40,
+    0x40, 0x44, 0x4A, 0x51, 0x40,
+    0x00, 0x00, 0xFF, 0x01, 0x03,
+    0xE0, 0x80, 0xFF, 0x00, 0x00,
+    0x08, 0x08, 0x6B, 0x6B, 0x08,
+    0x36, 0x12, 0x36, 0x24, 0x36,
+    0x06, 0x0F, 0x09, 0x0F, 0x06,
+    0x00, 0x00, 0x18, 0x18, 0x00,
+    0x00, 0x00, 0x10, 0x10, 0x00,
+    0x30, 0x40, 0xFF, 0x01, 0x01,
+    0x00, 0x1F, 0x01, 0x01, 0x1E,
+    0x00, 0x19, 0x1D, 0x17, 0x12,
+    0x00, 0x3C, 0x3C, 0x3C, 0x3C,
+    0x00, 0x00, 0x00, 0x00, 0x00
+};

drivers/qwiic/util/font8x16.h

@@ -0,0 +1,127 @@
+/******************************************************************************
+font8x16.h
+Definition for medium font
+
+This file was imported from the MicroView library, written by GeekAmmo
+(https://github.com/geekammo/MicroView-Arduino-Library), and released under
+the terms of the GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Modified by:
+Emil Varughese @ Edwin Robotics Pvt. Ltd.
+July 27, 2015
+https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+******************************************************************************/
+#pragma once
+
+#include "progmem.h"
+
+static const unsigned char font8x16[] PROGMEM = {
+    // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
+    8,16,32,96,2,56,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00,
+    0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00,
+    0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00,
+    0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00,
+    0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00,
+    0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00,
+    0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00,
+    0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00,
+    0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00,
+    0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00,
+    0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00,
+    0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00,
+    0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
+    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00,
+    0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00,
+    0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00,
+    0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00,
+    0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00,
+    0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00,
+    0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00,
+    0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
+    0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
+    0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00,
+    0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00,
+    0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00,
+    0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00,
+    0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00,
+    0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00,
+    0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x01, 0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00,
+    0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00,
+    0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
+    0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
+    0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
+    0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
+    0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
+    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00,
+    0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00,
+    0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
+    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00,
+    0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00,
+    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00,
+    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
+    0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00,
+    0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00,
+    0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00,
+    0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00,
+    0x00, 0x10, 0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00,
+    0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00,
+    0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
+    0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00,
+    0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00,
+    0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00,
+    0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};

keyboards/1upkeyboards/1up60hse/keymaps/default/config.h

@@ -1,4 +1,5 @@
 /* Copyright 2018 MechMerlin
+ * Copyright 2018 Logan Huskins
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c

@@ -1,4 +1,5 @@
 /* Copyright 2018 MechMerlin
+ * Copyright 2018 Logan Huskins
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,28 +18,34 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_60_ansi(
-		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, 
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
-		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
-		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, 
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(2), KC_RGUI, KC_RCTL),
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
+    KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,
+    KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H,
+    KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B,
+    KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,
+    KC_RALT, KC_RGUI, MO(1), KC_LCTL
+  ),
 
-	[1] = LAYOUT_60_ansi(
-		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+  [1] = LAYOUT_60_ansi(
+    KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+    KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN,
+    KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+    KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END,
+    KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS
+  ),
 
   [2] = LAYOUT_60_ansi(
-		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_STEP, BL_DEC, BL_INC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, RGB_SAI, RGB_HUD, RGB_HUI, RGB_MOD, RGB_TOG, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, RESET, BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI,
+    RGB_SAI, RGB_VAI, RGB_SPI, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
 };
 
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
   return true;
 }
-

keyboards/1upkeyboards/1up60hse/keymaps/default/readme.md

@@ -1,6 +1,4 @@
-# 1up60hse default keymap
+# 1up60hse default keymap generated by QMK Configurator
 
-This is the default keymap provided by [1upkeyboards](https://www.1upkeyboards.com).  
+This is the keymap used by [QMK Configurator](https://config.qmk.fm/#/1upkeyboards/1up60hse/LAYOUT_60_ansi) as default.  
 
-## Notes
-- Software reset key is located on `Esc` on the third layer.

keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/config.h

@@ -0,0 +1,15 @@
+#pragma once
+
+/* tap dance stuff*/
+#undef TAPPING_TERM
+#define TAPPING_TERM 500
+
+#define TAPPING_TOGGLE 2
+
+#define EXAMPLESTRING1 "tapdance_1"
+#define EXAMPLESTRING2 "tapdance_2"
+#define EXAMPLESTRING3 "tapdance_3"
+#define EXAMPLESTRING4 "tapdance_4"
+
+#undef RGBLED_NUM
+#define RGBLED_NUM 16

keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/keymap.c

@@ -0,0 +1,215 @@
+/*
+tap danc eis turned on in the rules now...
+*/
+#include QMK_KEYBOARD_H
+
+#define _EMOJI 0
+#define _TAPLAND 1
+#define _LEDCNTL 2
+
+enum custom_keycodes {
+    SHRUG,
+    DISFACE,
+    FU,
+    TFLIP,
+    TFLIP2,
+    SAD_EYES,
+    TPUT,
+    HAPPYFACE,
+    HEARTFACE,
+    CLOUD,
+    CHANFACE,
+    CMDCLEAR
+};
+//Tap Dance Declarations
+enum {
+  TD_EXAMPLE1 = 0,
+  TD_EXAMPLE2,
+  TD_EXAMPLE3,
+  TD_EXAMPLE4
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* EMOJI Pad
+    * ,-------------------------------.
+    * |TFLIP | TFlIP2|DISFACE|   FU   |
+    * |------+-------+-------+--------|
+    * | CLOUD|       |       | CLEAR  |
+    * |------+-------+-------+--------|
+    * |SHRUG |DISFACE| HRTFAC| HAPPYF |
+    * |------+-------+-------+--------|
+    * | ENTER|       |LEDCNTR| tapland| 
+    * `-------------------------------'
+    */
+      //purple
+    [_EMOJI] = LAYOUT_ortho_4x4(
+       TFLIP,   TFLIP2,   KC_NO,      FU , 
+       CLOUD,   KC_NO,  KC_NO,      CMDCLEAR, 
+       SHRUG,   DISFACE,  HEARTFACE,    HAPPYFACE, 
+       KC_ENT,  RGB_TOG,  MO(_LEDCNTL), MO(_TAPLAND)
+    ),
+ 
+    /* TapLand //
+    * ,-------------------------------.
+    * | str1 | str2  |  str3 |   str4 |
+    * |------+-------+-------+--------|
+    * |      |       |       |        |
+    * |------+-------+-------+--------|
+    * |      |       |       |        |
+    * |------+-------+-------+--------|
+    * |      |       |       |        | 
+    * `-------------------------------'
+    */
+    //blue
+    [_TAPLAND] = LAYOUT_ortho_4x4(
+       TD(TD_EXAMPLE1), TD(TD_EXAMPLE2),  TD(TD_EXAMPLE3), TD(TD_EXAMPLE4), 
+       KC_NO,         KC_NO,          KC_NO,         KC_NO, 
+       KC_NO,         KC_NO,          KC_NO,         KC_NO, 
+       KC_NO,         KC_NO,          KC_NO,         KC_NO
+    ),
+    /* LEDControl Pad
+    * ,-------------------------------.
+    * | snake|breathe|rainbow|gradient|
+    * |------+-------+-------+--------|
+    * | xmas |  Val+ | Sat+  |   HUE+ |
+    * |------+-------+-------+--------|
+    * |kngrdr|  Val- | Sat-  |   HUE- |
+    * |------+-------+-------+--------|
+    * | swirl| PLAIN |       | ON/OFF | 
+    * `-------------------------------'
+    */
+    //blue
+    [_LEDCNTL] = LAYOUT_ortho_4x4(
+        RGB_M_SN, RGB_M_B,    RGB_M_R,     RGB_M_G, 
+        RGB_M_X,  RGB_VAI,    RGB_SAI,     RGB_HUI, 
+        RGB_M_K,  RGB_VAD,    RGB_SAD,     RGB_HUD, 
+        RGB_M_SW, RGB_M_P,    KC_NO,     RGB_TOG
+     ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch(keycode) {
+            case CLOUD:       // (っ◕‿◕)っ
+                if(record->event.pressed){
+                    send_unicode_hex_string("0028 3063 25D5 203F 25D5 0029 3063");
+                }
+                return false;
+                break;
+            case FU:       // t(-_-t)
+                if(record->event.pressed){
+                    SEND_STRING("t(-_-t)");
+                }
+                return false;
+                break;  
+            case HAPPYFACE:       // ʘ‿ʘ 
+                if(record->event.pressed){
+                     send_unicode_hex_string("0298 203F 0298");
+                }
+                return false;
+                break; 
+            case CMDCLEAR:
+                if (record->event.pressed) {
+                    register_code(KC_LGUI);
+                    tap_code(KC_A);                 
+                    unregister_code(KC_LGUI);
+                    tap_code(KC_DEL);                 
+                }
+                return false;
+                break;  
+            case SHRUG: // ¯\_(ツ)_/¯
+                if (record->event.pressed) {
+                    send_unicode_hex_string("00AF 005C 005F 0028 30C4 0029 005F 002F 00AF");
+                }
+                return false; 
+                break;
+            case HEARTFACE:       // ♥‿♥
+                if(record->event.pressed){
+                    send_unicode_hex_string("2665 203F 2665");
+                }
+                return false;
+                break;  
+            case DISFACE:       // ಠ_ಠ 
+                if(record->event.pressed){
+                    send_unicode_hex_string("0CA0 005F 0CA0");
+                }
+                return false;
+                break;
+            case TFLIP:         // (╯°□°)╯ ︵ ┻━┻ 
+                if(record->event.pressed){
+                    send_unicode_hex_string("0028 256F 00B0 25A1 00B0 0029 256F 0020 FE35 0020 253B 2501 253B");
+                }
+                return false;
+                break;
+            case TFLIP2:         // ┻━┻︵ \(°□°)/ ︵ ┻━┻  
+                if(record->event.pressed){
+                    send_unicode_hex_string("253B 2501 253B FE35 0020 005C 0028 00B0 25A1 00B0 0029 002F 0020 FE35 0020 253B 2501 253B");
+                }
+                return false;
+                break;
+                } 
+    }
+    return true;
+}
+
+
+/* tap dance time */
+void tdexample1(qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count >= 2) {
+    SEND_STRING(EXAMPLESTRING1);
+    reset_tap_dance (state);
+  }
+}
+void tdexample2(qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count >= 2) {
+    SEND_STRING(EXAMPLESTRING2);
+    reset_tap_dance (state);
+  }
+}
+void tdexample3(qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count >= 2) {
+    SEND_STRING(EXAMPLESTRING3);
+    reset_tap_dance (state);
+  }
+}
+void tdexample4(qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count >= 2) {
+    SEND_STRING(EXAMPLESTRING4);
+    reset_tap_dance (state);
+  }
+}
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+    [TD_EXAMPLE1] = ACTION_TAP_DANCE_FN(tdexample1),
+    [TD_EXAMPLE2] = ACTION_TAP_DANCE_FN(tdexample2),
+    [TD_EXAMPLE3] = ACTION_TAP_DANCE_FN(tdexample3),
+    [TD_EXAMPLE4] = ACTION_TAP_DANCE_FN(tdexample4)
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_scan_user(void) {
+  static bool has_ran_yet;
+  if (!has_ran_yet) {
+    has_ran_yet = true;
+        rgblight_setrgb (16, 0, 16);
+  }
+}
+uint32_t layer_state_set_user(uint32_t state) {
+    switch (biton32(state)) {
+    case _TAPLAND:
+        rgblight_setrgb(0, 16, 0); //green
+        break;
+    case _LEDCNTL:
+        rgblight_setrgb(0, 0, 16); //blue
+        break;
+    case _EMOJI:
+        rgblight_setrgb (16, 0, 16); //purple
+        break;
+
+    default: //  for any other layers, or the default layer
+        rgblight_setrgb (16, 0, 16); //purple
+        break;
+    }
+  return state;
+}

keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/readme.md

@@ -0,0 +1,10 @@
+# Ridingtraffic's examples
+===
+This keymap has many features:
+3 layers
+Momentary layer switching
+16 pixel neopixel
+Unicode Enabled
+Tap dance enabled
+
+The rgb also updates depending on what layer you are on, and then flips back when done.

keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/rules.mk

@@ -0,0 +1,5 @@
+# turning on tap dance
+TAP_DANCE_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+MOUSEKEY_ENABLE = no
+UNICODE_ENABLE = yes 

keyboards/30wer/30wer.c

@@ -0,0 +1 @@
+#include "30wer.h"

keyboards/30wer/30wer.h

@@ -0,0 +1,14 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+	     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b \
+) \
+{ \
+	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \
+	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c }, \
+	{      k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b } \
+}

keyboards/30wer/config.h

@@ -0,0 +1,31 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x1234
+#define PRODUCT_ID      0x5678
+#define DEVICE_VER      0x0000
+#define MANUFACTURER    8o7wer
+#define PRODUCT         30wer
+#define DESCRIPTION     Gherkin style construction 30% staggered pcb kit
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 13
+
+/* pcb default pin-out */
+#define MATRIX_ROW_PINS { E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1, D0, D4, C6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS

keyboards/30wer/info.json

@@ -0,0 +1,51 @@
+{
+    "keyboard_name": "30wer", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 13.25, 
+    "height": 3, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Tab", "x":0, "y":0},
+                {"label":"Q", "x":1, "y":0},
+                {"label":"W", "x":2, "y":0},
+                {"label":"E", "x":3, "y":0},
+                {"label":"R", "x":4, "y":0},
+                {"label":"T", "x":5, "y":0},
+                {"label":"Y", "x":6, "y":0},
+                {"label":"U", "x":7, "y":0},
+                {"label":"I", "x":8, "y":0},
+                {"label":"O", "x":9, "y":0},
+                {"label":"P", "x":10, "y":0},
+                {"label":"Bksp", "x":11, "y":0},
+                {"label":"Delete", "x":12, "y":0, "w":1.25},
+                {"label":"Ctrl", "x":0, "y":1, "w":1.25},
+                {"label":"A", "x":1.25, "y":1},
+                {"label":"S", "x":2.25, "y":1},
+                {"label":"D", "x":3.25, "y":1},
+                {"label":"F", "x":4.25, "y":1},
+                {"label":"G", "x":5.25, "y":1},
+                {"label":"H", "x":6.25, "y":1},
+                {"label":"J", "x":7.25, "y":1},
+                {"label":"K", "x":8.25, "y":1},
+                {"label":"L", "x":9.25, "y":1},
+                {"label":":", "x":10.25, "y":1},
+                {"label":"\"", "x":11.25, "y":1},
+                {"label":"Enter", "x":12.25, "y":1},
+                {"label":"Shift", "x":0, "y":2, "w":1.75},
+                {"label":"Z", "x":1.75, "y":2},
+                {"label":"X", "x":2.75, "y":2},
+                {"label":"C", "x":3.75, "y":2},
+                {"label":"V", "x":4.75, "y":2},
+                {"label":"B", "x":5.75, "y":2},
+                {"label":"N", "x":6.75, "y":2},
+                {"label":"M", "x":7.75, "y":2},
+                {"label":"<", "x":8.75, "y":2},
+                {"label":">", "x":9.75, "y":2},
+                {"label":"?", "x":10.75, "y":2},
+                {"label":"Space", "x":11.75, "y":2, "w":1.5}
+            ]
+        }
+    }
+}

keyboards/30wer/keymaps/default/keymap.c

@@ -0,0 +1,17 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_BSPC, \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+           KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LT(1, KC_SPC) \
+),
+
+[1] = LAYOUT( \
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_UP,   KC_DEL, \
+  _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, \
+           KC_LALT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______ \
+),
+
+};

keyboards/30wer/readme.md

@@ -0,0 +1,16 @@
+30wer by 8o7wer
+===
+
+![30wer](https://i.imgur.com/ZYbRvY7.png)
+
+Keyboard Maintainer: [Filip Sund](https://github.com/FSund)  
+Hardware Supported: Pro Micro  
+Hardware Availability: Group buy
+
+More info in the [group by thread at Keebtalk](https://www.keebtalk.com/t/gb-30wer-by-8o7wer/3618/).
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 30wer:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/30wer/rules.mk

@@ -0,0 +1,60 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no 		# Enable WS2812 RGB underlight.

keyboards/40percentclub/25/25.c

@@ -0,0 +1,60 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "25.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+	{{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
+	{{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
+	{{4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}},
+	{{4, 8}, {3, 8}, {2, 8}, {1, 8}, {0, 8}},
+	{{4, 9}, {3, 9}, {2, 9}, {1, 9}, {0, 9}},
+
+	{{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}},
+  {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}},
+  {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}},
+	{{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}},
+	{{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}},
+};
+#endif

keyboards/40percentclub/25/25.h

@@ -0,0 +1,85 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define ___ KC_NO
+
+#ifndef FLIP_HALF
+#define LAYOUT_ortho_5x10( \
+	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
+	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
+	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \
+	L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \
+	L40, L41, L42, L43, L44, R40, R41, R42, R43, R44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ R04, R03, R02, R01, R00 }, \
+	{ R14, R13, R12, R11, R10 }, \
+	{ R24, R23, R22, R21, R20 }, \
+	{ R34, R33, R32, R31, R30 }, \
+	{ R44, R43, R42, R41, R40 }  \
+}
+#else
+#define LAYOUT_ortho_5x10( \
+	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
+	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
+	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \
+	L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \
+	L40, L41, L42, L43, L44, R40, R41, R42, R43, R44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ R00, R01, R02, R03, R04 }, \
+	{ R10, R11, R12, R13, R14 }, \
+	{ R20, R21, R22, R23, R24 }, \
+	{ R30, R31, R32, R33, R34 }, \
+	{ R40, R41, R42, R43, R44 }  \
+}
+#endif
+
+#define LAYOUT_ortho_5x5( \
+	L00, L01, L02, L03, L04, \
+	L10, L11, L12, L13, L14, \
+	L20, L21, L22, L23, L24, \
+	L30, L31, L32, L33, L34, \
+	L40, L41, L42, L43, L44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }  \
+}
+
+#define LAYOUT_macro LAYOUT_ortho_5x5
+#define LAYOUT_split LAYOUT_ortho_5x10
+
+#ifdef USE_I2C
+  #error "I2C not Supported"
+#endif

keyboards/40percentclub/25/config.h

@@ -0,0 +1,230 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x0F25
+#define MANUFACTURER    di0ib
+#define PRODUCT         The 5x5 Keyboard
+#define DESCRIPTION     A split 50 key keyboard
+
+#define USE_SERIAL
+
+/* Select hand configuration */
+#define MASTER_LEFT
+//#define MASTER_RIGHT
+//#define EE_HANDS
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 5*2
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/

keyboards/40percentclub/25/info.json

@@ -0,0 +1,29 @@
+{
+    "keyboard_name": "foobar",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 6,
+    "height": 2,
+    "layouts": {
+        "LAYOUT_macro": {
+            "key_count": 15,
+            "layout": [
+              {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},
+              {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
+              {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2},
+              {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3},
+              {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}
+          ]
+        },
+        "LAYOUT_split": {
+            "key_count": 30,
+            "layout": [
+              {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0},
+              {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1},
+              {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2},
+              {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3},
+              {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}
+          ]
+        }
+    }
+}

keyboards/40percentclub/25/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/40percentclub/25/keymaps/default/keymap.c

@@ -0,0 +1,87 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER  1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Qwerty
+   * ,---------------------------------------------------------------------.
+   * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |
+   * |------+------+------+------+------+------+------+------+------+------|
+   * |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |
+   * |------+------+------+------+-------------+------+------+------+------|
+   * |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  | Bksp |
+   * |------+------+------+------+------|------+------+------+------+------|
+   * |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |Enter |
+   * |------+------+------+------+------+------+------+------+------+------|
+   * | Ctrl | GUI  | Alt  |Lower |Space | Shift| Left | Down |  Up  |Right |
+   * `---------------------------------------------------------------------'
+   */
+  [_QWERTY] = LAYOUT_split(
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    \
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_BSPC, \
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_ENT,  \
+    KC_LCTL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_LSFT, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+  ),
+
+  /* Lower
+   * ,---------------------------------------------------------------------.
+   * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  `   |   /  |   _  |   +  |
+   * |------+------+------+------+------|------+------+------+------+------|
+   * |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |  ~   |   [  |   ]  |  \   |
+   * |------+------+------+------+-------------+------+------+------+------|
+   * | Esc  |      |      |      |      |      |      |   ;  |  "   |  Del |
+   * |------+------+------+------+------|------+------+------+------+------|
+   * | Tab  |      |      |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      | Home | PgDn | PgUp | End  |
+   * `---------------------------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT_split( \
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_GRV, KC_SLSH, KC_UNDS, KC_PLUS, \
+    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TILD, KC_LBRC, KC_RBRC, KC_PIPE, \
+    KC_ESC,  _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_DEL,  \
+    KC_TAB,  _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/40percentclub/25/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default split keymap for 25

keyboards/40percentclub/25/keymaps/macro/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/40percentclub/25/keymaps/macro/keymap.c

@@ -0,0 +1,42 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_macro(
+    KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,  \
+    KC_GRV,   KC_Q,    KC_W,    KC_E,    KC_R,  \
+    KC_TAB,   KC_A,    KC_S,    KC_D,    KC_F,  \
+    KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,  \
+    KC_LCTL,  KC_LGUI, KC_LALT, KC_SPC,  KC_SPC \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/40percentclub/25/keymaps/macro/readme.md

@@ -0,0 +1 @@
+# The default macro keymap for 25

keyboards/40percentclub/25/readme.md

@@ -0,0 +1,18 @@
+# 25
+
+![25](https://2.bp.blogspot.com/-lBK_ZlB3a9Q/WcAM0B_vwdI/AAAAAAACDgs/qnI9YB53pzck4Bw0v5QRvypDMs80CxWVQCLcBGAs/s640/IMG_0695.JPG)
+===
+
+Split 50 key keyboard - it is the largest keybad that fits within the 100mm x 100mm PCB size. Can be used together as a split keyboard or as a single 25 key macropad.
+
+* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/25)
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: 25 PCB  
+Hardware Availability: [25 project on 40% Keyboards](http://www.40percent.club/2017/09/25.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 40percentclub/25:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/25/rules.mk

@@ -0,0 +1,85 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs (+400)
+
+# Enable generic behavior for split boards
+SPLIT_KEYBOARD = yes
+
+LAYOUTS = ortho_5x5 ortho_5x10

keyboards/40percentclub/4x4/4x4.h

@@ -1,6 +1,4 @@
-
-#ifndef FOURX4_H
-#define FOURX4_H
+#pragma once
 
 #include "quantum.h"
 #define ___ KC_NO
@@ -59,4 +57,15 @@
     { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, K3f } \
 }
 
-#endif
+#define LAYOUT_kc_ortho_4x12( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b  \
+) \
+{ \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b, ___, ___, ___, ___}, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b, ___, ___, ___, ___}, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b, ___, ___, ___, ___}, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b, ___, ___, ___, ___} \
+}

keyboards/40percentclub/4x4/keymaps/default/keymap.c

@@ -6,9 +6,6 @@
 #define NUM 2
 #define DIR 3
 
-// Readability keycodes
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Single 4x4 board only
@@ -65,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [NUM] = LAYOUT_ortho_4x16(
   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, _______,
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS, _______,
-  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, _______,
+  _______, KC_F11,  KC_F12,  _______, _______, _______, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, _______,
   _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______, _______
   ),
 
@@ -90,23 +87,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-    (void)event;
-
-  switch (id) {
-
-  }
-  return MACRO_NONE;
-}
-
-
 void matrix_init_user(void) {
 
 }

keyboards/40percentclub/4x4/readme.md

@@ -17,7 +17,8 @@ Hardware Availability: [4x4x4x4x4 project on 40% Keyboards](http://www.40percent
 
 Make example for this keyboard (after setting up your build environment):  
 
-    make 4x4:default
+    make 40percentclub/4x4:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.  
 First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.  

keyboards/40percentclub/4x4/rules.mk

@@ -0,0 +1,79 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16

keyboards/40percentclub/5x5/5x5.h

@@ -1,6 +1,4 @@
-
-#ifndef FIVEX5_H
-#define FIVEX5_H
+#pragma once
 
 #include "quantum.h"
 #define ___ KC_NO
@@ -35,7 +33,7 @@
     { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, ___, ___, ___, ___, ___}, \
     { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, ___, ___, ___, ___, ___}, \
     { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, ___, ___, ___, ___, ___}, \
-    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, ___, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, ___, ___, ___, ___, ___}, \
     { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, ___, ___, ___, ___, ___} \
 }
 
@@ -50,8 +48,6 @@
     { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e}, \
     { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e}, \
     { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e}, \
-    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b, K3c, K3d, K3e}, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e}, \
     { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e} \
 }
-
-#endif

keyboards/40percentclub/5x5/keymaps/default/keymap.c

@@ -6,9 +6,6 @@
 #define NUM 2
 #define DIR 3
 
-// Readability keycodes
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Single 5x5 board only
@@ -74,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______,
   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS,
-  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT,
+  _______, KC_F11,  KC_F12,  _______, _______, _______, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT,
   _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______
   ),
 
@@ -102,25 +99,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
 
 void matrix_init_user(void) {
 

keyboards/40percentclub/5x5/readme.md

@@ -17,7 +17,8 @@ Hardware Availability: [5x5 project on 40% Keyboards](http://www.40percent.club/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make 5x5:default
+    make 40percentclub/5x5:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.    
 First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.  

keyboards/40percentclub/5x5/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.
@@ -37,24 +36,31 @@ F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
 BOOTLOADER = caterina
 
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
@@ -69,6 +75,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs (+400)
 
 LAYOUTS = ortho_5x5  ortho_5x10  ortho_5x15

keyboards/40percentclub/6lit/6lit.c

@@ -0,0 +1,53 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "6lit.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+	{{2, 2}, {1, 2}, {0, 2}},
+	{{2, 3}, {1, 3}, {0, 3}},
+	{{0, 0}, {1, 0}, {2, 0}},
+  {{0, 1}, {1, 1}, {2, 1}},
+};
+#endif

keyboards/40percentclub/6lit/6lit.h

@@ -0,0 +1,58 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define ___ KC_NO
+
+#ifndef FLIP_HALF
+#define LAYOUT_ortho_2x6( \
+	L00, L01, L02, R00, R01, R02, \
+	L10, L11, L12, R10, R11, R12  \
+) { \
+	{ L00, L01, L02 }, \
+	{ L10, L11, L12 }, \
+	{ R02, R01, R00 }, \
+	{ R12, R11, R10 }, \
+}
+#else
+#define LAYOUT_ortho_2x6( \
+	L00, L01, L02, R00, R01, R02, \
+	L10, L11, L12, R10, R11, R12  \
+) { \
+	{ L00, L01, L02 }, \
+	{ L10, L11, L12 }, \
+	{ R00, R01, R02 }, \
+	{ R10, R11, R12 }, \
+}
+#endif
+
+#define LAYOUT_ortho_2x3( \
+	L00, L01, L02, \
+	L10, L11, L12  \
+) { \
+	{ L00, L01, L02 }, \
+	{ L10, L11, L12 }, \
+	{ ___, ___, ___ }, \
+  { ___, ___, ___ }, \
+}
+
+#define LAYOUT_macro LAYOUT_ortho_2x3
+#define LAYOUT_split LAYOUT_ortho_2x6
+
+#ifdef USE_I2C
+  #error "I2C not Supported"
+#endif

keyboards/40percentclub/6lit/config.h

@@ -0,0 +1,230 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x0F61
+#define MANUFACTURER    di0ib
+#define PRODUCT         The 6lit Macropad
+#define DESCRIPTION     A split 12 key Macropad
+
+#define USE_SERIAL
+
+/* Select hand configuration */
+#define MASTER_LEFT
+//#define MASTER_RIGHT
+//#define EE_HANDS
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 2*2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D7, E6 }
+#define MATRIX_COL_PINS { F6, F7, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/

keyboards/40percentclub/6lit/info.json

@@ -0,0 +1,23 @@
+{
+    "keyboard_name": "6lit",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 6,
+    "height": 2,
+    "layouts": {
+        "LAYOUT_macro": {
+            "key_count": 6,
+            "layout": [
+              {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0},
+              {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}
+            ]
+        },
+        "LAYOUT_split": {
+            "key_count": 12,
+            "layout": [
+              {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0},
+              {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}
+            ]
+        }
+    }
+}

keyboards/40percentclub/6lit/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/40percentclub/6lit/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_split( /* Base */
+    KC_F13,   KC_F14,   KC_F15,   KC_F16,   KC_F17,   KC_F18, \
+    KC_F19,   KC_F20,   KC_F21,   KC_F22,   KC_F23,   KC_F24  \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/40percentclub/6lit/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default split keymap for 6lit

keyboards/40percentclub/6lit/keymaps/macro/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here