Added APA102 support (#4940)

* Fixed pin for RGB

* Re-did apa102 stuff

* changed to use pincontrol functions

* Removed a newline?

* Changed to comply with project style

.github/ISSUE_TEMPLATE/blank.md

@@ -0,0 +1,5 @@
+---
+name: Blank issue
+about: If you're 100% sure that you don't need one of the other issue templates, use this one instead. 
+
+---

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,32 @@
+---
+name: Bug report
+about: Create a report to help us improve the QMK Firmware
+---
+<!-- Provide a general summary of the bug in the title above. -->
+
+<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
+
+## Describe the Bug
+
+<!-- A clear and concise description of what the bug is. -->
+
+## System Information
+
+ - Keyboard:  
+   - Revision (if applicable):  
+ - Operating system:
+ - AVR GCC version: 
+<!-- Run `avr-gcc --version` to find this out. -->
+ - ARM GCC version: 
+<!-- Run `arm-none-eabi-gcc --version` to find this out. -->
+ - QMK Firmware version:
+<!-- Run `git describe --abbrev=0 --tags` to find this out. -->
+ - Any keyboard related software installed? 
+   - [ ] AutoHotKey
+   - [ ] Karabiner
+   - [ ] Other:
+
+## Additional Context
+
+<!-- Add any other relevant information about the problem here. -->

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,19 @@
+---
+name: Feature request
+about: Suggest a new feature or changes to existing features 
+---
+<!--- Provide a general summary of the changes you want in the title above. -->
+
+<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
+
+## Feature Request Type
+
+- [ ] Core functionality
+- [ ] Add-on hardware support (eg. audio, RGB, OLED screen, etc.)
+- [ ] Alteration (enhancement/optimization) of existing feature(s)
+- [ ] New behavior
+
+## Description
+
+<!-- A few sentences describing what it is that you'd like to see in QMK. Additional information (such as links to spec sheets, licensing info, other related issues or PRs, etc) would be helpful. -->

.github/ISSUE_TEMPLATE/other_issues.md

@@ -0,0 +1,9 @@
+---
+name: Other issues
+about: Anything else that doesn't fall into the above categories. 
+---
+<!--- Provide a general summary of the changes you want in the title above. -->
+
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
+
+<!-- Please check https://docs.qmk.fm/#/support for additional resources first. If that doesn't answer your question, choose the bug report template instead, as that may be more appropriate. -->

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,34 @@
+<!--- Provide a general summary of your changes in the title above. -->
+
+<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
+
+## Description
+
+<!--- Describe your changes in detail here. -->
+
+## Types of Changes
+
+<!--- What types of changes does your code introduce? Put an `x` in all the boxes that apply. -->
+- [ ] Core
+- [ ] Bugfix
+- [ ] New feature
+- [ ] Enhancement/optimization
+- [ ] Keyboard (addition or update)
+- [ ] Keymap/layout/userspace (addition or update)
+- [ ] Documentation
+
+## Issues Fixed or Closed by This PR
+
+* 
+
+## Checklist
+
+<!--- Go over all the following points, and put an `x` in all the boxes that apply. -->
+<!--- If you're unsure about any of these, don't hesitate to ask. We're here to help! -->
+- [ ] My code follows the code style of this project.
+- [ ] My change requires a change to the documentation.
+- [ ] I have updated the documentation accordingly.
+- [ ] I have read the [**CONTRIBUTING** document](https://docs.qmk.fm/#/contributing).
+- [ ] I have added tests to cover my changes.
+- [ ] I have tested the changes and verified that they work and don't break anything (as well as I can manage).

.gitignore

@@ -1,3 +1,4 @@
+.history/
 .dep
 *.o
 *.bin

.travis.yml

@@ -19,7 +19,8 @@ install:
 before_script:
   - avr-gcc --version
 script:
-- make test:all AUTOGEN=false
+- git rev-parse --short HEAD
+- make test:all
 - bash util/travis_build.sh
 - bash util/travis_docs.sh
 addons:
@@ -33,7 +34,7 @@ addons:
     - diffutils
     - dos2unix
     - doxygen
-after_success: 
+after_success:
   bash util/travis_compiled_push.sh
 notifications:
   webhooks:

Dockerfile

@@ -1,28 +1,29 @@
-FROM debian:jessie
-MAINTAINER Erik Dasque <erik@frenchguys.com>
+FROM debian
 
-RUN apt-get update && apt-get install --no-install-recommends -y build-essential \
+RUN apt-get update && apt-get install --no-install-recommends -y \
+    avr-libc \
+    avrdude \
+    binutils-arm-none-eabi \
+    binutils-avr \
+    build-essential \
+    dfu-programmer \
+    dfu-util \
     gcc \
+    gcc-arm-none-eabi \
+    gcc-avr \
+    git \
+    libnewlib-arm-none-eabi \
+    software-properties-common \
     unzip \
     wget \
     zip \
-    gcc-avr \
-    binutils-avr \
-    avr-libc \
-    dfu-programmer \
-    dfu-util \
-    gcc-arm-none-eabi \
-    binutils-arm-none-eabi \
-    libnewlib-arm-none-eabi \
-    git \
-    software-properties-common \
-    avrdude \
     && rm -rf /var/lib/apt/lists/*
 
-ENV keyboard=ergodox
-ENV subproject=ez
-ENV keymap=default
+ENV KEYBOARD=ergodox_ez
+ENV KEYMAP=default
 
-VOLUME /qmk
-WORKDIR /qmk
-CMD make clean ; make keyboard=${keyboard} subproject=${subproject} keymap=${keymap}
+VOLUME /qmk_firmware
+WORKDIR /qmk_firmware
+COPY . .
+
+CMD make $KEYBOARD:$KEYMAP

Makefile

@@ -112,23 +112,29 @@ $(eval $(call GET_KEYBOARDS))
 # Only consider folders with makefiles, to prevent errors in case there are extra folders
 #KEYBOARDS += $(patsubst $(ROOD_DIR)/keyboards/%/rules.mk,%,$(wildcard $(ROOT_DIR)/keyboards/*/*/rules.mk))
 
+.PHONY: list-keyboards
 list-keyboards:
 	echo $(KEYBOARDS)
-	exit 0
 
 define PRINT_KEYBOARD
 	$(info $(PRINTING_KEYBOARD))
 endef
 
+.PHONY: generate-keyboards-file
 generate-keyboards-file:
 	$(foreach PRINTING_KEYBOARD,$(KEYBOARDS),$(eval $(call PRINT_KEYBOARD)))
-	exit 0
 
+.PHONY: clean
 clean:
-	echo -n 'Deleting .build ... '
+	echo -n 'Deleting .build/ ... '
 	rm -rf $(BUILD_DIR)
-	echo 'done'
-	exit 0
+	echo 'done.'
+
+.PHONY: distclean
+distclean: clean
+	echo -n 'Deleting *.bin and *.hex ... '
+	rm -f *.bin *.hex
+	echo 'done.'
 
 #Compatibility with the old make variables, anything you specify directly on the command line
 # always overrides the detected folders
@@ -548,9 +554,10 @@ endif
 	# it has to be there to allow parallel execution of the submake
 	# This always tries to compile everything, even if error occurs in the middle
 	# But we return the error code at the end, to trigger travis failures
-	$(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND))
+	# The sort at this point is to remove duplicates
+	$(foreach COMMAND,$(sort $(COMMANDS)),$(RUN_COMMAND))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
-	$(foreach TEST,$(TESTS),$(RUN_TEST))
+	$(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 
 # These no longer work because of the colon system
@@ -576,6 +583,7 @@ lib/%:
 	git submodule sync $?
 	git submodule update --init $?
 
+.PHONY: git-submodule
 git-submodule:
 	git submodule sync --recursive
 	git submodule update --init --recursive --progress

Vagrantfile

@@ -2,8 +2,11 @@
 # vi: set ft=ruby :
 
 Vagrant.configure(2) do |config|
-  # VMware/Virtualbox 64 bit
-  config.vm.box = "phusion/ubuntu-14.04-amd64"
+  # define a name instead of just 'default'
+  config.vm.define "qmk_firmware"
+
+  # VMware/Virtualbox ( and also Hyperv/Parallels) 64 bit
+  config.vm.box = "bento/ubuntu-16.04"
 
   # This section allows you to customize the Virtualbox VM
   # settings, ie showing the GUI or upping the memory
@@ -15,13 +18,16 @@ Vagrant.configure(2) do |config|
     # your Teensy via the VM rather than your host OS
     #vb.customize ['modifyvm', :id, '--usb', 'on']
     #vb.customize ['usbfilter', 'add', '0',
-    #    	  '--target', :id,
-    #    	  '--name', 'teensy',
-    #    	  '--vendorid', '0x16c0',
-    #    	  '--productid','0x0478'
-    #		 ]
+    #         '--target', :id,
+    #         '--name', 'teensy',
+    #         '--vendorid', '0x16c0',
+    #         '--productid','0x0478'
+    #        ]
     # Customize the amount of memory on the VM:
     vb.memory = "512"
+    # Uncomment the below lines if you have time sync
+    # issues with make and incremental builds
+    #vb.customize [ "guestproperty", "set", :id, "/VirtualBox/GuestAdd/VBoxService/--timesync-set-threshold", 1000 ]
   end
 
   # This section allows you to customize the VMware VM
@@ -56,19 +62,18 @@ Vagrant.configure(2) do |config|
   # This script ensures the required packages for AVR programming are installed
   # It also ensures the system always gets the latest updates when powered on
   # If this causes issues you can run a 'vagrant destroy' and then
-  # add a # before ,args: and run 'vagrant up' to get a working
+  # add a # before ,run: (or change "always" to "once") and run 'vagrant up' to get a working
   # non-updated box and then attempt to troubleshoot or open a Github issue
-
-  config.vm.provision "shell", run: "always", path: "./util/qmk_install.sh", args: "-update"
+  config.vm.provision "shell", inline: "/bin/sh -c 'yes | /vagrant/util/qmk_install.sh'", run: "always"
 
   config.vm.post_up_message = <<-EOT
 
   Log into the VM using 'vagrant ssh'. QMK directory synchronized with host is
   located at /vagrant
-  To compile the .hex files use make command inside this directory.
+  To compile the .hex files use make command inside this directory, e.g.
+     cd /vagrant
+     make <keyboard>:default
 
-  QMK's make format recently changed to use folder locations and colons:
-     make project_folder:keymap[:target]
   Examples:
      make planck/rev4:default:dfu
      make planck:default

build_keyboard.mk

@@ -16,6 +16,7 @@ include common.mk
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
+STM32_PATH := quantum/stm32
 
 # Force expansion
 TARGET := $(TARGET)
@@ -34,6 +35,10 @@ $(error MASTER does not have a valid value(left/right))
     endif
 endif
 
+ifdef SKIP_VERSION
+    OPT_DEFS += -DSKIP_VERSION
+endif
+
 # Determine which subfolders exist.
 KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
 KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
@@ -68,6 +73,7 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
     KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
 endif
 
+
 # Pull in rules.mk files from all our subfolders
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
     include $(KEYBOARD_PATH_5)/rules.mk
@@ -85,6 +91,62 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
     include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
+
+MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
+
+ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_5)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_4)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_3)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_2)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_1)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
+else ifneq ($(LAYOUTS),)
+    include build_layout.mk
+else
+    $(error Could not find keymap)
+    # this state should never be reached
+endif
+
+ifeq ($(strip $(CTPC)), yes)
+  CONVERT_TO_PROTON_C=yes
+endif
+
+ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
+    TARGET := $(TARGET)_proton_c
+    include $(STM32_PATH)/proton_c.mk
+    OPT_DEFS += -DCONVERT_TO_PROTON_C
+endif
+
+ifneq ($(FORCE_LAYOUT),)
+    TARGET := $(TARGET)_$(FORCE_LAYOUT)
+endif
+
+include quantum/mcu_selection.mk
+
+ifdef MCU_FAMILY
+    OPT_DEFS += -DQMK_STM32
+    KEYBOARD_PATHS += $(STM32_PATH)
+endif
+
+
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 
@@ -223,39 +285,6 @@ PROJECT_DEFS := $(OPT_DEFS)
 PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
 PROJECT_CONFIG := $(CONFIG_H)
 
-MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
-
-ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_5)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_4)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_3)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_2)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_1)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
-else ifneq ($(LAYOUTS),)
-    include build_layout.mk
-else
-    $(error Could not find keymap)
-    # this state should never be reached
-endif
-
 # Userspace setup and definitions
 ifeq ("$(USER_NAME)","")
     USER_NAME := $(KEYMAP)
@@ -278,6 +307,7 @@ ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
 endif
 
 # # project specific files
+SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
 SRC += $(KEYBOARD_SRC) \
     $(KEYMAP_C) \
     $(QUANTUM_SRC)
@@ -296,6 +326,7 @@ include $(TMK_PATH)/protocol.mk
 include $(TMK_PATH)/common.mk
 include bootloader.mk
 
+SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
 SRC += $(TMK_COMMON_SRC)
 OPT_DEFS += $(TMK_COMMON_DEFS)
 EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
@@ -342,5 +373,7 @@ $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 # Default target.
 all: build check-size
 build: elf cpfirmware
+check-size: build
 
+include show_options.mk
 include $(TMK_PATH)/rules.mk

build_layout.mk

@@ -15,4 +15,13 @@ define SEARCH_LAYOUTS
     $$(foreach LAYOUTS_REPO,$$(LAYOUTS_REPOS),$$(eval $$(call SEARCH_LAYOUTS_REPO)))
 endef
 
+ifneq ($(FORCE_LAYOUT),)
+    ifneq (,$(findstring $(FORCE_LAYOUT),$(LAYOUTS)))
+        $(info Forcing layout: $(FORCE_LAYOUT))
+        LAYOUTS := $(FORCE_LAYOUT)
+    else
+        $(error Forced layout does not exist)
+    endif
+endif
+
 $(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))

common.mk

@@ -21,5 +21,4 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
 COMMON_VPATH += $(QUANTUM_PATH)/audio
 COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
 COMMON_VPATH += $(QUANTUM_PATH)/api
-COMMON_VPATH += $(QUANTUM_PATH)/split_common
 COMMON_VPATH += $(DRIVER_PATH)

common_features.mk

@@ -114,8 +114,27 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
-RGB_MATRIX_ENABLE ?= no
 VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
+
+LED_MATRIX_ENABLE ?= no
+ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
+    ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
+        $(error LED_MATRIX_ENABLE="$(LED_MATRIX_ENABLE)" is not a valid matrix type)
+    else
+        OPT_DEFS += -DLED_MATRIX_ENABLE -DBACKLIGHT_ENABLE -DBACKLIGHT_CUSTOM_DRIVER
+        SRC += $(QUANTUM_DIR)/led_matrix.c
+        SRC += $(QUANTUM_DIR)/led_matrix_drivers.c
+    endif
+endif
+
+ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
+    OPT_DEFS += -DIS31FL3731
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3731-simple.c
+    SRC += i2c_master.c
+endif
+
+RGB_MATRIX_ENABLE ?= no
 ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
 ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
     $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
@@ -191,7 +210,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
         CIE1931_CURVE = yes
     endif
-        ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+    ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
     endif
 endif
@@ -213,6 +232,7 @@ endif
 ifeq ($(strip $(TERMINAL_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c
     OPT_DEFS += -DTERMINAL_ENABLE
+    OPT_DEFS += -DUSER_PRINT
 endif
 
 ifeq ($(strip $(USB_HID_ENABLE)), yes)
@@ -224,6 +244,13 @@ ifeq ($(strip $(ENCODER_ENABLE)), yes)
     OPT_DEFS += -DENCODER_ENABLE
 endif
 
+ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L)
+    COMMON_VPATH += $(DRIVER_PATH)/haptic
+    SRC += DRV2605L.c
+    SRC += i2c_master.c
+    OPT_DEFS += -DDRV2605L
+endif
+
 ifeq ($(strip $(HD44780_ENABLE)), yes)
     SRC += drivers/avr/hd44780.c
     OPT_DEFS += -DHD44780_ENABLE
@@ -239,12 +266,15 @@ ifeq ($(strip $(LEADER_ENABLE)), yes)
   OPT_DEFS += -DLEADER_ENABLE
 endif
 
+include $(DRIVER_PATH)/qwiic/qwiic.mk
+
 QUANTUM_SRC:= \
     $(QUANTUM_DIR)/quantum.c \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
 
-ifndef CUSTOM_MATRIX
+# Include the standard or split matrix code if needed
+ifneq ($(strip $(CUSTOM_MATRIX)), yes)
     ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
         QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
     else
@@ -252,10 +282,35 @@ ifndef CUSTOM_MATRIX
     endif
 endif
 
+DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
+# Debounce Modules. If implemented in matrix.c, don't use these.
+DEBOUNCE_TYPE?= sym_g
+VALID_DEBOUNCE_TYPES := sym_g eager_pk custom
+ifeq ($(filter $(DEBOUNCE_TYPE),$(VALID_DEBOUNCE_TYPES)),)
+    $(error DEBOUNCE_TYPE="$(DEBOUNCE_TYPE)" is not a valid debounce algorithm)
+endif
+ifeq ($(strip $(DEBOUNCE_TYPE)), sym_g)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_sym_g.c
+else ifeq ($(strip $(DEBOUNCE_TYPE)), eager_pk)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_eager_pk.c
+endif
+
+
+
 ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
     OPT_DEFS += -DSPLIT_KEYBOARD
+
+    # Include files used by all split keyboards
     QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
-                $(QUANTUM_DIR)/split_common/split_util.c \
-                $(QUANTUM_DIR)/split_common/i2c.c \
-                $(QUANTUM_DIR)/split_common/serial.c
+                   $(QUANTUM_DIR)/split_common/split_util.c
+
+    # Determine which (if any) transport files are required
+    ifneq ($(strip $(SPLIT_TRANSPORT)), custom)
+        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c
+        # Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
+        # Unused functions are pruned away, which is why we can add both drivers here without bloat.
+        QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/i2c.c \
+                           $(QUANTUM_DIR)/split_common/serial.c
+    endif
+    COMMON_VPATH += $(QUANTUM_PATH)/split_common
 endif

docs/LANGS.md

@@ -0,0 +1,4 @@
+# Languages
+
+* [English](/)
+* [Chinese](zh/)

docs/_sidebar.md

@@ -1,97 +0,0 @@
-* [Complete Newbs Guide](newbs.md)
-  * [Getting Started](newbs_getting_started.md)
-  * [Building Your First Firmware](newbs_building_firmware.md)
-  * [Flashing Firmware](newbs_flashing.md)
-  * [Testing and Debugging](newbs_testing_debugging.md)
-  * [Best Practices](newbs_best_practices.md)
-  * [Learning Resources](newbs_learn_more_resources.md)
-
-* [QMK Basics](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
-* [FAQ](faq.md)
-  * [General FAQ](faq_general.md)
-  * [Build/Compile QMK](faq_build.md)
-  * [Debugging/Troubleshooting QMK](faq_debug.md)
-  * [Keymap](faq_keymap.md)
-
-* Detailed Guides
-  * [Install Build Tools](getting_started_build_tools.md)
-  * [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Keymap Overview](keymap.md)
-
-* [Hardware](hardware.md)
-  * [AVR Processors](hardware_avr.md)
-  * [Drivers](hardware_drivers.md)
-
-* Reference
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
-  * [Config Options](config_options.md)
-  * [Keycodes](keycodes.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
-  * [Glossary](reference_glossary.md)
-  * [Unit Testing](unit_testing.md)
-  * [Useful Functions](ref_functions.md)
-
-* [Features](features.md)
-  * [Basic Keycodes](keycodes_basic.md)
-  * [Quantum Keycodes](quantum_keycodes.md)
-  * [Advanced Keycodes](feature_advanced_keycodes.md)
-  * [Audio](feature_audio.md)
-  * [Auto Shift](feature_auto_shift.md)
-  * [Backlight](feature_backlight.md)
-  * [Bluetooth](feature_bluetooth.md)
-  * [Bootmagic](feature_bootmagic.md)
-  * [Combos](feature_combo)
-  * [Command](feature_command.md)
-  * [Dynamic Macros](feature_dynamic_macros.md)
-  * [Encoders](feature_encoders.md)
-  * [Grave Escape](feature_grave_esc.md)
-  * [Key Lock](feature_key_lock.md)
-  * [Layouts](feature_layouts.md)
-  * [Leader Key](feature_leader_key.md)
-  * [Macros](feature_macros.md)
-  * [Mouse Keys](feature_mouse_keys.md)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [Pointing Device](feature_pointing_device.md)
-  * [PS/2 Mouse](feature_ps2_mouse.md)
-  * [RGB Lighting](feature_rgblight.md)
-  * [RGB Matrix](feature_rgb_matrix.md)
-  * [Space Cadet Shift](feature_space_cadet_shift.md)
-  * [Space Cadet Shift Enter](feature_space_cadet_shift_enter.md)
-  * [Stenography](feature_stenography.md)
-  * [Swap Hands](feature_swap_hands.md)
-  * [Tap Dance](feature_tap_dance.md)
-  * [Terminal](feature_terminal.md)
-  * [Thermal Printer](feature_thermal_printer.md)
-  * [Unicode](feature_unicode.md)
-  * [Userspace](feature_userspace.md)
-  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
-
-* For Makers and Modders
-  * [Hand Wiring Guide](hand_wire.md)
-  * [ISP Flashing Guide](isp_flashing_guide.md)
-  * [ARM Debugging Guide](arm_debugging.md)
-
-* For a Deeper Understanding
-  * [How Keyboards Work](how_keyboards_work.md)
-  * [Understanding QMK](understanding_qmk.md)
-
-* Other Topics
-  * [Using Eclipse with QMK](eclipse.md)
-
-* QMK Internals (In Progress)
-  * [Defines](internals_defines.md)
-  * [Input Callback Reg](internals_input_callback_reg.md)
-  * [Midi Device](internals_midi_device.md)
-  * [Midi Device Setup Process](internals_midi_device_setup_process.md)
-  * [Midi Util](internals_midi_util.md)
-  * [Send Functions](internals_send_functions.md)
-  * [Sysex Tools](internals_sysex_tools.md)

docs/_summary.md

@@ -39,9 +39,12 @@
   * [Glossary](reference_glossary.md)
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
+  * [Configurator Support](reference_configurator_support.md)
+  * [info.json Format](reference_info_json.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)
+  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
   * [Quantum Keycodes](quantum_keycodes.md)
   * [Advanced Keycodes](feature_advanced_keycodes.md)
   * [Audio](feature_audio.md)
@@ -73,12 +76,14 @@
   * [Thermal Printer](feature_thermal_printer.md)
   * [Unicode](feature_unicode.md)
   * [Userspace](feature_userspace.md)
-  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
 
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
+  * [I2C Driver](i2c_driver.md)
+  * [GPIO Controls](internals_gpio_control.md)
+  * [Proton C Conversion](proton_c_conversion.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)
@@ -86,6 +91,7 @@
 
 * Other Topics
   * [Using Eclipse with QMK](eclipse.md)
+  * [Support](support.md)
 
 * QMK Internals (In Progress)
   * [Defines](internals_defines.md)

docs/config_options.md

@@ -87,7 +87,7 @@ This is a C header file that is one of the first things included, and will persi
   * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 * `#define LOCKING_RESYNC_ENABLE`
   * tries to keep switch state consistent with keyboard LED state
-* `#define IS_COMMAND() ( keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) )`
+* `#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))`
   * key combination that allows the use of magic commands (useful for debugging)
 * `#define USB_MAX_POWER_CONSUMPTION`
   * sets the maximum power (in mA) over USB for the device (default: 500)
@@ -109,9 +109,9 @@ If you define these options you will disable the associated feature, which can s
 * `#define NO_ACTION_ONESHOT`
   * disable one-shot modifiers
 * `#define NO_ACTION_MACRO`
-  * disable all macro handling
+  * disable old style macro handling: MACRO() & action_get_macro
 * `#define NO_ACTION_FUNCTION`
-  * disable the action function (deprecated)
+  * disable calling of action_function() from the fn_actions array (deprecated)
 
 ## Features That Can Be Enabled
 
@@ -132,16 +132,22 @@ If you define these options you will enable the associated feature, which may in
 * `#define TAPPING_TOGGLE 2`
   * how many taps before triggering the toggle
 * `#define PERMISSIVE_HOLD`
-  * makes tap and hold keys work better for fast typers who don't want tapping term set above 500
+  * makes tap and hold keys trigger the hold if another key is pressed before releasing, even if it hasn't hit the `TAPPING_TERM`
   * See [Permissive Hold](feature_advanced_keycodes.md#permissive-hold) for details
 * `#define IGNORE_MOD_TAP_INTERRUPT`
-  * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold
-  * See [Mod tap interrupt](feature_advanced_keycodes.md#mod-tap-interrupt) for details
+  * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the `TAPPING_TERM` for both keys.
+  * See [Mod tap interrupt](feature_advanced_keycodes.md#ignore-mod-tap-interrupt) for details
 * `#define TAPPING_FORCE_HOLD`
   * makes it possible to use a dual role key as modifier shortly after having been tapped
-  * See [Hold after tap](feature_advanced_keycodes.md#hold-after-tap)
+  * See [Hold after tap](feature_advanced_keycodes.md#tapping-force-hold)
+  * Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle)
 * `#define LEADER_TIMEOUT 300`
   * how long before the leader key times out
+    * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.
+* `#define LEADER_PER_KEY_TIMING`
+  * sets the timer for leader key chords to run on each key press rather than overall
+* `#define LEADER_KEY_STRICT_KEY_PROCESSING`
+  * Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify `MT(MOD_CTL, KC_A)` if you want to use `KC_A`.
 * `#define ONESHOT_TIMEOUT 300`
   * how long before oneshot times out
 * `#define ONESHOT_TAP_TOGGLE 2`
@@ -159,6 +165,8 @@ If you define these options you will enable the associated feature, which may in
   * Set this to the number of combos that you're using in the [Combo](feature_combo.md) feature.
 * `#define COMBO_TERM 200`
   * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
+* `#define TAP_CODE_DELAY 100`
+  * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
 
 ## RGB Light Configuration
 
@@ -189,12 +197,51 @@ If you define these options you will enable the associated feature, which may in
 
 Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
 
+* `SPLIT_TRANSPORT = custom`
+  * Allows replacing the standard split communication routines with a custom one. ARM based split keyboards must use this at present.
+
+### Setting Handedness
+
+One thing to remember, the side that the USB port is plugged into is always the master half. The side not plugged into USB is the slave.
+
+There are a few different ways to set handedness for split keyboards (listed in order of precedence):
+
+1. Set `SPLIT_HAND_PIN`: Reads a pin to determine handedness. If pin is high, it's the left side, if low, the half is determined to be the right side
+2. Set `EE_HANDS` and flash `eeprom-lefthand.eep`/`eeprom-righthand.eep` to each half
+3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
+4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
+
 * `#define SPLIT_HAND_PIN B7`
-  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace 'B7' with the pin you are using. This is optional and you can still use the EEHANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
-  
+  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+
+* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` is not defined)
+  * Reads the handedness value stored in the EEPROM after `eeprom-lefthand.eep`/`eeprom-righthand.eep` has been flashed to their respective halves.
+
+* `#define MASTER_RIGHT`
+  * Master half is defined to be the right half.
+
+### Other Options
+
 * `#define USE_I2C`
   * For using I2C instead of Serial (defaults to serial)
 
+* `#define SOFT_SERIAL_PIN D0`
+  * When using serial, define this. `D0` or `D1`,`D2`,`D3`,`E6`.
+
+* `#define MATRIX_ROW_PINS_RIGHT { <row pins> }`
+* `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
+  * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.
+
+* `#define SELECT_SOFT_SERIAL_SPEED <speed>` (default speed is 1)
+  * Sets the protocol speed when using serial communication
+  * Speeds:
+    * 0: about 189kbps (Experimental only)
+    * 1: about 137kbps (default)
+    * 2: about 75kbps
+    * 3: about 39kbps
+    * 4: about 26kbps
+    * 5: about 20kbps
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.
@@ -246,6 +293,8 @@ Use these to enable or disable building certain features. The more you have enab
   * Enable the audio subsystem.
 * `RGBLIGHT_ENABLE`
   * Enable keyboard underlight functionality
+* `LEADER_ENABLE`
+  * Enable leader key chording
 * `MIDI_ENABLE`
   * MIDI controls
 * `UNICODE_ENABLE`
@@ -256,7 +305,40 @@ Use these to enable or disable building certain features. The more you have enab
   * Current options are AdafruitEzKey, AdafruitBLE, RN42
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+* `CUSTOM_MATRIX`
+  * Allows replacing the standard matrix scanning routine with a custom one.
+* `CUSTOM_DEBOUNCE`
+  * Allows replacing the standard key debouncing routine with a custom one.
 * `WAIT_FOR_USB`
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
+
+## USB Endpoint Limitations
+
+In order to provide services over USB, QMK has to use USB endpoints.
+These are a finite resource: each microcontroller has only a certain number.
+This limits what features can be enabled together.
+If the available endpoints are exceeded, a build error is thrown.
+
+The following features can require separate endpoints:
+
+* `MOUSEKEY_ENABLE`
+* `EXTRAKEY_ENABLE`
+* `CONSOLE_ENABLE`
+* `NKRO_ENABLE`
+* `MIDI_ENABLE`
+* `RAW_ENABLE`
+* `VIRTSER_ENABLE`
+
+In order to improve utilisation of the endpoints, the HID features can be combined to use a single endpoint.
+By default, `MOUSEKEY`, `EXTRAKEY`, and `NKRO` are combined into a single endpoint.
+
+The base keyboard functionality can also be combined into the endpoint,
+by setting `KEYBOARD_SHARED_EP = yes`.
+This frees up one more endpoint,
+but it can prevent the keyboard working in some BIOSes,
+as they do not implement Boot Keyboard protocol switching.
+
+Combining the mouse also breaks Boot Mouse compatibility.
+The mouse can be uncombined by setting `MOUSE_SHARED_EP = no` if this functionality is required.

docs/custom_quantum_functions.md

@@ -90,7 +90,7 @@ keyrecord_t record {
 
 # LED Control
 
-This allows you to control the 5 LED's defined as part of the USB Keyboard spec. It will be called when the state of one of those 5 LEDs changes.
+QMK provides methods to read the 5 LEDs defined as part of the HID spec:
 
 * `USB_LED_NUM_LOCK`
 * `USB_LED_CAPS_LOCK`
@@ -98,31 +98,44 @@ This allows you to control the 5 LED's defined as part of the USB Keyboard spec.
 * `USB_LED_COMPOSE`
 * `USB_LED_KANA`
 
+These five constants correspond to the positional bits of the host LED state.
+There are two ways to get the host LED state:
+
+* by implementing `led_set_user()`
+* by calling `host_keyboard_leds()`
+
+## `led_set_user()`
+
+This function will be called when the state of one of those 5 LEDs changes. It receives the LED state as a parameter.
+Use the `IS_LED_ON(usb_led, led_name)` and `IS_LED_OFF(usb_led, led_name)` macros to check the LED status.
+
+!> `host_keyboard_leds()` may already reflect a new value before `led_set_user()` is called.
+
 ### Example `led_set_user()` Implementation
 
 ```c
 void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
         PORTB |= (1<<0);
     } else {
         PORTB &= ~(1<<0);
     }
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
         PORTB |= (1<<1);
     } else {
         PORTB &= ~(1<<1);
     }
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
         PORTB |= (1<<2);
     } else {
         PORTB &= ~(1<<2);
     }
-    if (usb_led & (1<<USB_LED_COMPOSE)) {
+    if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) {
         PORTB |= (1<<3);
     } else {
         PORTB &= ~(1<<3);
     }
-    if (usb_led & (1<<USB_LED_KANA)) {
+    if (IS_LED_ON(usb_led, USB_LED_KANA)) {
         PORTB |= (1<<4);
     } else {
         PORTB &= ~(1<<4);
@@ -135,19 +148,52 @@ void led_set_user(uint8_t usb_led) {
 * Keyboard/Revision: `void led_set_kb(uint8_t usb_led)`
 * Keymap: `void led_set_user(uint8_t usb_led)`
 
+## `host_keyboard_leds()`
 
-# Matrix Initialization Code
+Call this function to get the last received LED state. This is useful for reading the LED state outside `led_set_*`, e.g. in [`matrix_scan_user()`](#matrix-scanning-code).
+For convenience, you can use the `IS_HOST_LED_ON(led_name)` and `IS_HOST_LED_OFF(led_name)` macros instead of calling and checking `host_keyboard_leds()` directly.
 
-Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i&#xb2;c controllers you will need to set up that hardware before it can be used.
+## Setting Physical LED State
 
+Some keyboard implementations provide convenience methods for setting the state of the physical LEDs.
 
-### Example `matrix_init_user()` Implementation
+### Ergodox Boards
+
+The Ergodox implementations provide `ergodox_right_led_1`/`2`/`3_on`/`off()` to turn individual LEDs on or off, as well as `ergodox_right_led_on`/`off(uint8_t led)` to turn them on or off by their index.
+
+In addition, it is possible to specify the brightness level of all LEDs with `ergodox_led_all_set(uint8_t n)`; of individual LEDs with `ergodox_right_led_1`/`2`/`3_set(uint8_t n)`; or by index with `ergodox_right_led_set(uint8_t led, uint8_t n)`.
+
+Ergodox boards also define `LED_BRIGHTNESS_LO` for the lowest brightness and `LED_BRIGHTNESS_HI` for the highest brightness (which is the default).
+
+# Keyboard Initialization Code
+
+There are several steps in the keyboard initialization process.  Depending on what you want to do, it will influence which function you should use.
+
+These are the three main initialization functions, listed in the order that they're called.
+
+* `keyboard_pre_init_*` - Happens before most anything is started. Good for hardware setup that you want running very early.
+* `matrix_init_*` - Happens midway through the firmware's startup process. Hardware is initialized, but features may not be yet.
+* `keyboard_post_init_*` - Happens at the end of the firmware's startup process. This is where you'd want to put "customization" code, for the most part.
+
+!> For most people, the `keyboard_post_init_user` function is what you want to call.  For instance, this is where you want to set up things for RGB Underglow.
+
+## Keyboard Pre Initialization code
+
+This runs very early during startup, even before the USB has been started. 
+
+Shortly after this, the matrix is initialized.
+
+For most users, this shouldn't be used, as it's primarily for hardware oriented initialization. 
+
+However, if you have hardware stuff that you need initialized, this is the best place for it (such as initializing LED pins).
+
+### Example `keyboard_pre_init_user()` Implementation
 
 This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
 
 ```c
-void matrix_init_user(void) {
-  // Call the keymap level matrix init.
+void keyboard_pre_init_user(void) {
+  // Call the keyboard pre init code.
 
   // Set our LED pins as output
   DDRB |= (1<<1);
@@ -156,11 +202,47 @@ void matrix_init_user(void) {
 }
 ```
 
+### `keyboard_pre_init_*` Function Documentation
+
+* Keyboard/Revision: `void keyboard_pre_init_kb(void)`
+* Keymap: `void keyboard_pre_init_user(void)`
+
+## Matrix Initialization Code
+
+This is called when the matrix is initialized, and after some of the hardware has been set up, but before many of the features have been initialized. 
+
+This is useful for setting up stuff that you may need elsewhere, but isn't hardware related nor is dependant on where it's started. 
+
+
 ### `matrix_init_*` Function Documentation
 
 * Keyboard/Revision: `void matrix_init_kb(void)`
 * Keymap: `void matrix_init_user(void)`
 
+
+## Keyboard Post Initialization code
+
+This is ran as the very last task in the keyboard initialization process. This is useful if you want to make changes to certain features, as they should be initialized by this point.
+
+
+### Example `keyboard_post_init_user()` Implementation
+
+This example, running after everything else has initialized, sets up the rgb underglow configuration.
+
+```c
+void keyboard_post_init_user(void) {
+  // Call the post init code.
+  rgblight_enable_noeeprom(); // enables Rgb, without saving settings
+  rgblight_sethsv_noeeprom(180, 255, 255): // sets the color to teal/cyan without saving
+  rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3); // sets mode to Fast breathing without saving
+}
+```
+
+### `keyboard_post_init_*` Function Documentation
+
+* Keyboard/Revision: `void keyboard_post_init_kb(void)`
+* Keymap: `void keyboard_post_init_user(void)`
+
 # Matrix Scanning Code
 
 Whenever possible you should customize your keyboard by using `process_record_*()` and hooking into events that way, to ensure that your code does not have a negative performance impact on your keyboard. However, in rare cases it is necessary to hook into the matrix scanning. Be extremely careful with the performance of code in these functions, as it will be called at least 10 times per second.
@@ -176,7 +258,7 @@ This example has been deliberately omitted. You should understand enough about Q
 
 This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot.
 
-You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LED's or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
+You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LEDs or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
 
 
 # Keyboard Idling/Wake Code
@@ -200,10 +282,9 @@ void suspend_wakeup_init_user(void)
 {
     rgb_matrix_set_suspend_state(false);
 }
-
 ```
 
-### `keyboard_init_*` Function Documentation
+### Keyboard suspend/wake  Function Documentation
 
 * Keyboard/Revision: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
 * Keymap: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
@@ -256,7 +337,7 @@ Keep in mind that EEPROM has a limited number of writes. While this is very high
 
 * If you don't understand the example, then you may want to avoid using this feature, as it is rather complicated. 
 
-### Example  Implementation
+### Example Implementation
 
 This is an example of how to add settings, and read and write it. We're using the user keymap for the example here.  This is a complex function, and has a lot going on.  In fact, it uses a lot of the above functions to work! 
 

docs/faq_build.md

@@ -37,6 +37,10 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
 
+### Serial device is not detected in bootloader mode on Linux
+Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as 
+Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
+
 ## Unknown Device for DFU Bootloader
 
 If you're using Windows to flash your keyboard, and you are running into issues, check the Device Manager.  If you see an "Unknown Device" when the keyboard is in "bootloader mode", then you may have a driver issue. 
@@ -126,5 +130,5 @@ For now, you need to rollback avr-gcc to 7 in brew.
 ```
 brew uninstall --force avr-gcc
 brew install avr-gcc@7
-brew link avr-gcc@7
+brew link --force avr-gcc@7
 ```

docs/faq_keymap.md

@@ -11,8 +11,8 @@ Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_f
 
 There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JIS. North America primarily uses ANSI, Europe and Africa primarily use ISO, and Japan uses JIS. Regions not mentioned typically use either ANSI or ISO. The keycodes corresponding to these layouts are shown here:
 
-<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/070a530eedaed36a2d77f3f6fd455677 -->
-![Keyboard Layout Image](https://i.imgur.com/gvlNUpQ.png)
+<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/bf431647d1001cff5eff20ae55621e9a -->
+![Keyboard Layout Image](https://i.imgur.com/5wsh5wM.png)
 
 ## Some Of My Keys Are Swapped Or Not Working
 
@@ -211,20 +211,3 @@ here real_mods lost state for 'physical left shift'.
 
 weak_mods is ORed with real_mods when keyboard report is sent.
 https://github.com/tmk/tmk_core/blob/master/common/action_util.c#L57
-
-## Timer Functionality
-
-It's possible to start timers and read values for time-specific events - here's an example:
-
-```c
-static uint16_t key_timer;
-key_timer = timer_read();
-
-if (timer_elapsed(key_timer) < 100) {
-  // do something if less than 100ms have passed
-} else {
-  // do something if 100ms or more have passed
-}
-```
-
-It's best to declare the `static uint16_t key_timer;` at the top of the file, outside of any code blocks you're using it in.

docs/feature_advanced_keycodes.md

@@ -21,11 +21,11 @@ Additionally, if at least one right-handed modifier is specified in a Mod Tap or
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers)
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers). When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
-* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
+* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers: `MOD_LCTL`, `MOD_LSFT`, `MOD_LALT`, `MOD_LGUI` (note the use of `MOD_` constants instead of `KC_`). These modifiers can be combined using bitwise OR, e.g. `LM(_RAISE, MOD_LCTL | MOD_LALT)`.
 * `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
 * `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys](#one-shot-keys) for details and additional functionality.
 * `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
@@ -60,22 +60,21 @@ Sometimes, you might want to switch between layers in a macro or as part of a ta
 
 These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.
 
-|Key       |Aliases               |Description                                         |
-|----------|----------------------|----------------------------------------------------|
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|                      |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`ALTG(kc)`|                      |Hold Right Control and Alt and press `kc`           |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|Key       |Aliases                        |Description                                         |
+|----------|-------------------------------|----------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
 
 You can also chain them, for example `LCTL(LALT(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.
 
@@ -93,7 +92,7 @@ The modifiers this keycode and `OSM()` accept are prefixed with `MOD_`, not `KC_
 |`MOD_LGUI`|Left GUI (Windows/Command/Meta key)     |
 |`MOD_RCTL`|Right Control                           |
 |`MOD_RSFT`|Right Shift                             |
-|`MOD_RALT`|Right Alt                               |
+|`MOD_RALT`|Right Alt (AltGr)                       |
 |`MOD_RGUI`|Right GUI (Windows/Command/Meta key)    |
 |`MOD_HYPR`|Hyper (Left Control, Shift, Alt and GUI)|
 |`MOD_MEH` |Meh (Left Control, Shift, and Alt)      |
@@ -108,23 +107,23 @@ This key would activate Left Control and Left Shift when held, and send Escape w
 
 For convenience, QMK includes some Mod-Tap shortcuts to make common combinations more compact in your keymap:
 
-|Key         |Aliases                                |Description                                            |
-|------------|---------------------------------------|-------------------------------------------------------|
-|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
-|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
-|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
-|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
-|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
-|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
-|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
-|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
+|Key         |Aliases                                                          |Description                                            |
+|------------|-----------------------------------------------------------------|-------------------------------------------------------|
+|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
+|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
+|`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
+|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 
 ## Caveats
 
@@ -147,7 +146,7 @@ Additionally, hitting keys five times in a short period will lock that key. This
 You can control the behavior of one shot keys by defining these in `config.h`:
 
 ```c
-#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped this number of times again. */
+#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped once again. */
 #define ONESHOT_TIMEOUT 5000  /* Time (in ms) before the one shot key is released */
 ```
 
@@ -162,8 +161,88 @@ For one shot mods, you need to call `set_oneshot_mods(MOD)` to set it, or `clear
 
 !> If you're having issues with OSM translating over Remote Desktop Connection, this can be fixed by opening the settings, going to the "Local Resources" tap, and in the keyboard section, change the drop down to "On this Computer".  This will fix the issue and allow OSM to function properly over Remote Desktop.
 
+## Callbacks
 
-# Permissive Hold
+When you'd like to perform custom logic when pressing a one shot key, there are several callbacks you can choose to implement. You could indicate changes in one shot keys by flashing an LED or making a sound, for example.
+
+There is a callback for `OSM(mod)`. It is called whenever the state of any one shot modifier key is changed: when it toggles on, but also when it is toggled off. You can use it like this:
+
+```c
+void oneshot_mods_changed_user(uint8_t mods) {
+  if (mods & MOD_MASK_SHIFT) {
+    println("Oneshot mods SHIFT");
+  }
+  if (mods & MOD_MASK_CTRL) {
+    println("Oneshot mods CTRL");
+  }
+  if (mods & MOD_MASK_ALT) {
+    println("Oneshot mods ALT");
+  }
+  if (mods & MOD_MASK_GUI) {
+    println("Oneshot mods GUI");
+  }
+  if (!mods) {
+    println("Oneshot mods off");
+  }
+}
+```
+
+The `mods` argument contains the active mods after the change, so it reflects the current state.
+
+When you use One Shot Tap Toggle (by adding `#define ONESHOT_TAP_TOGGLE 2` in your `config.h` file), you may lock a modifier key by pressing it the specified amount of times. There's a callback for that, too:
+
+```c
+void oneshot_locked_mods_changed_user(uint8_t mods) {
+  if (mods & MOD_MASK_SHIFT) {
+    println("Oneshot locked mods SHIFT");
+  }
+  if (mods & MOD_MASK_CTRL) {
+    println("Oneshot locked mods CTRL");
+  }
+  if (mods & MOD_MASK_ALT) {
+    println("Oneshot locked mods ALT");
+  }
+  if (mods & MOD_MASK_GUI) {
+    println("Oneshot locked mods GUI");
+  }
+  if (!mods) {
+    println("Oneshot locked mods off");
+  }
+}
+```
+
+Last, there is also a callback for the `OSL(layer)` one shot key:
+
+```c
+void oneshot_layer_changed_user(uint8_t layer) {
+  if (layer == 1) {
+    println("Oneshot layer 1 on");
+  }
+  if (!layer) {
+    println("Oneshot layer off");
+  }
+}
+```
+
+If any one shot layer is switched off, `layer` will be zero. When you're looking to do something on any layer change instead of one shot layer changes, `layer_state_set_user` is a better callback to use.
+
+If you are making your own keyboard, there are also `_kb` equivalent functions:
+
+```c
+void oneshot_locked_mods_changed_kb(uint8_t mods);
+void oneshot_mods_changed_kb(uint8_t mods);
+void oneshot_layer_changed_kb(uint8_t layer);
+```
+
+As with any callback, be sure to call the `_user` variant to allow for further customizability.
+
+# Tap-Hold Configuration Options
+
+While Tap-Hold options are fantastic, they are not without their issues.  We have tried to configure them with reasonal defaults, but that may still cause issues for some people. 
+
+These options let you modify the behavior of the Tap-Hold keys.
+
+## Permissive Hold
 
 As of [PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/), there is a new `config.h` option:
 
@@ -171,30 +250,56 @@ As of [PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/), there is a new
 #define PERMISSIVE_HOLD
 ```
 
-This makes it easier for fast typists to use dual-function keys. Without this, if you let go of a held key inside the tapping term, it won't register.
+This makes tap and hold keys (like Mod Tap) work better for fast typist, or for high `TAPPING_TERM` settings. 
 
-Example: (Tapping Term = 200ms)
+If you press a Mod Tap key, tap another key (press and release) and then release the Mod Tap key, all within the tapping term, it will output the "tapping" function for both keys.
 
-- SHFT_T(KC_A) Down
-- KC_X Down
-- KC_X Up
-- SHFT_T(KC_A) Up
+For Instance:
 
-With defaults, if above is typed within tapping term, this will emit `ax`. With permissive hold, if above is typed within tapping term, this will emit `X` (so, Shift+X).
+- `SHFT_T(KC_A)` Down
+- `KC_X` Down
+- `KC_X` Up
+- `SHFT_T(KC_A)` Up
 
-# Mod tap interrupt
+Normally, if you do all this within the `TAPPING_TERM` (default: 200ms) this will be registered as `ax` by the firmware and host system. With permissive hold enabled, this modifies how this is handled by considering the Mod Tap keys as a Mod if another key is tapped, and would registered as `X` (`SHIFT`+`x`). 
 
-When a dual role key used for a modifier is quickly followed by another keys, it is interpreted as held even before the tapping term elapsed.  This is a problem if a key is used for example inside a rolling combo because the second key will be pressed before the first key is released.
+?> If you have `Ignore Mod Tap Interrupt` enabled, as well, this will modify how both work. The regular key has the modifier added if the first key is released first or if both keys are held longer than the `TAPPING_TERM`.
 
-For example, when trying to type the rolling combo "zx" and z being configured to send Ctrl when hold, z rapidly followed by x actually sends Ctrl-x. That's bad.
+## Ignore Mod Tap Interrupt
 
-You can disable this behavior by defining `IGNORE_MOD_TAP_INTERRUPT` in `config.h`.
+To enable this setting, add this to your `config.h`:
 
-Note that this only concerns modifiers and not layer switching keys.
+```c
+#define IGNORE_MOD_TAP_INTERRUPT
+```
 
-# Hold after tap
+Similar to Permissive Hold, this alters how the firmware processes input for fast typist. If you press a Mod Tap key, press another key, release the Mod Tap key, and then release the normal key, it would normally output the "tapping" function for both keys. This may not be desirable for rolling combo keys. 
 
-When the user holds a key after tap, this repeats the tapped key rather to hold a modifier key.  This allows to use auto repeat for the tapped key.  If you prefer to hold a modifier instead, define `TAPPING_FORCE_HOLD` in `config.h`.
+Setting `Ignore Mod Tap Interrupt` requires  holding both keys for the `TAPPING_TERM` to trigger the hold function (the mod).
+
+For Instance:
+
+- `SHFT_T(KC_A)` Down
+- `KC_X` Down
+- `SHFT_T(KC_A)` Up
+- `KC_X` Up
+
+Normally, this would send `X` (`SHIFT`+`x`). With `Ignore Mod Tap Interrupt` enabled, holding both keys are required for the `TAPPING_TERM` to register the hold action. A quick tap will output `ax` in this case, while a hold on both will still output `X`  (`SHIFT`+`x`).
+
+
+?> __Note__: This only concerns modifiers and not layer switching keys.
+
+?> If you have `Permissive Hold` enabled, as well, this will modify how both work. The regular key has the modifier added if the first key is released first or if both keys are held longer than the `TAPPING_TERM`.
+
+## Tapping Force Hold
+
+To enable `tapping force hold`, add the following to your `config.h`: 
+
+```c
+#define TAPPING_FORCE_HOLD
+```
+
+When the user holds a key after tap, this repeats the tapped key rather to hold a modifier key.  This allows to use auto repeat for the tapped key.  
 
 Example:
 
@@ -210,8 +315,14 @@ With `TAPPING_FORCE_HOLD`, the second press will be interpreted as a Shift, allo
 
 !> `TAPPING_FORCE_HOLD` will break anything that uses tapping toggles (Such as the `TT` layer keycode, and the One Shot Tapping Toggle).
 
-# Retro Tapping
+## Retro Tapping
+
+To enable `retro tapping`, add the following to your `config.h`: 
+
+```c
+#define RETRO_TAPPING
+```
 
 Holding and releasing a dual function key without pressing another key will result in nothing happening. With retro tapping enabled, releasing the key without pressing another will send the original keycode even if it is outside the tapping term.
 
-For instance, holding and releasing `LT(2, KC_SPACE)` without hitting another key will result in nothing happening. With `RETRO_TAPPING` defined in your `config.h`, it will send `KC_SPACE`.
+For instance, holding and releasing `LT(2, KC_SPACE)` without hitting another key will result in nothing happening. With this enabled, it will send `KC_SPACE` instead.

docs/feature_audio.md

@@ -61,10 +61,19 @@ It's advised that you wrap all audio features in `#ifdef AUDIO_ENABLE` / `#endif
 
 The available keycodes for audio are: 
 
-* `AU_ON` - Turn audio mode on
-* `AU_OFF` - Turn audio mode off
-* `AU_TOG` - Toggle audio mode
+* `AU_ON` - Turn Audio Feature on
+* `AU_OFF` - Turn Audio Feature off
+* `AU_TOG` - Toggle Audio Feature state
 
+!> These keycodes turn all of the audio functionality on and off.  Turning it off means that audio feedback, audio clicky, music mode, etc. are disabled, completely. 
+
+## ARM Audio Volume
+
+For ARM devices, you can adjust the DAC sample values. If your board is too loud for you or your coworkers, you can set the max using `DAC_SAMPLE_MAX` in your `config.h`:
+
+```c
+#define DAC_SAMPLE_MAX 65535U
+```
 
 ## Music Mode
 
@@ -151,7 +160,7 @@ You can configure the default, min and max frequencies, the stepping and built i
 
 ## MIDI Functionality
 
-This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile.
+This is still a WIP, but check out `quantum/process_keycode/process_midi.c` to see what's happening. Enable from the Makefile.
 
 
 ## Audio Keycodes

docs/feature_backlight.md

@@ -40,6 +40,7 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
 |---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
 |`BACKLIGHT_PIN`      |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
 |`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 15 excluding off)                                                   |
+|`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                             |
 |`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if hardware PWM is used                                                          |
 |`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
 
@@ -54,14 +55,17 @@ In this handler, the value of an incrementing counter is mapped onto a precomput
 
 ## Backlight Functions
 
-|Function  |Description                                               |
-|----------|----------------------------------------------------------|
-|`backlight_toggle()`   |Turn the backlight on or off                 |
-|`backlight_step()`     |Cycle through backlight levels               |
-|`backlight_increase()` |Increase the backlight level                 |
-|`backlight_decrease()` |Decrease the backlight level                 |
-|`backlight_level(x)`   |Sets the backlight level to specified level  |
-|`get_backlight_level()`|Return the current backlight level           |
+|Function  |Description                                                |
+|----------|-----------------------------------------------------------|
+|`backlight_toggle()`    |Turn the backlight on or off                 |
+|`backlight_enable()`    |Turn the backlight on                        |
+|`backlight_disable()`   |Turn the backlight off                       |
+|`backlight_step()`      |Cycle through backlight levels               |
+|`backlight_increase()`  |Increase the backlight level                 |
+|`backlight_decrease()`  |Decrease the backlight level                 |
+|`backlight_level(x)`    |Sets the backlight level to specified level  |
+|`get_backlight_level()` |Return the current backlight level           |
+|`is_backlight_enabled()`|Return whether the backlight is currently on |
 
 ### Backlight Breathing Functions
 

docs/feature_bootmagic.md

@@ -11,7 +11,15 @@ There are three separate but related features that allow you to change the behav
 On some keyboards Bootmagic is disabled by default. If this is the case, it must be explicitly enabled in your `rules.mk` with:
 
 ```make
-BOOTMAGIC_ENABLE = yes
+BOOTMAGIC_ENABLE = full
+```
+
+?> You may see `yes` being used in place of `full`, and this is okay. However, `yes` is deprecated, and ideally `full` (or `lite`) should be used instead.
+
+Additionally, you can use [Bootmagic Lite](#bootmagic-lite) (a scaled down, very basic version of Bootmagic) by adding the following to your `rules.mk` file:
+
+```make
+BOOTMAGIC_ENABLE = lite
 ```
 
 ## Hotkeys
@@ -99,3 +107,47 @@ If you would like to change the hotkey assignments for Bootmagic, `#define` thes
 |`BOOTMAGIC_KEY_DEFAULT_LAYER_5`         |`KC_5`       |Make layer 5 the default layer                     |
 |`BOOTMAGIC_KEY_DEFAULT_LAYER_6`         |`KC_6`       |Make layer 6 the default layer                     |
 |`BOOTMAGIC_KEY_DEFAULT_LAYER_7`         |`KC_7`       |Make layer 7 the default layer                     |
+
+# Bootmagic Lite
+
+In addition to the full blown Bootmagic feature, is the Bootmagic Lite feature that only handles jumping into the bootloader.  This is great for boards that don't have a physical reset button but you need a way to jump into the bootloader, and don't want to deal with the headache that Bootmagic can cause.
+
+To enable this version of Bootmagic, you need to enable it in your `rules.mk` with:
+
+```make
+BOOTMAGIC_ENABLE = lite
+```
+
+Additionally, you may want to specify which key to use.  This is especially useful for keyboards that have unusual matrices.  To do so, you need to specify the row and column of the key that you want to use. Add these entries to your `config.h` file:
+
+```c
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 1
+```
+
+By default, these are set to 0 and 0, which is usually the "ESC" key on a majority of keyboards.
+
+And to trigger the bootloader, you hold this key down when plugging the keyboard in. Just the single key.
+
+!> Using bootmagic lite will **always reset** the EEPROM, so you will lose any settings that have been saved.
+
+## Advanced Bootmagic Lite
+
+The `bootmagic_lite` function is defined weakly, so that you can replace this in your code, if you need.  A great example of this is the Zeal60 boards that have some additional handling needed.
+
+To replace the function, all you need to do is add something like this to your code:
+
+```c
+void bootmagic_lite(void) {
+    matrix_scan();
+    wait_ms(DEBOUNCING_DELAY * 2);
+    matrix_scan();
+
+    if (matrix_get_row(BOOTMAGIC_LITE_ROW) & (1 << BOOTMAGIC_LITE_COLUMN)) {
+      // Jump to bootloader.
+      bootloader_jump();
+    }
+}
+```
+
+You can additional feature here. For instance, resetting the eeprom or requiring additional keys to be pressed to trigger bootmagic.  Keep in mind that `bootmagic_lite` is called before a majority of features are initialized in the firmware.

docs/feature_combo.md

@@ -29,7 +29,7 @@ If you want to add a list, then you'd use something like this:
 enum combos {
   AB_ESC,
   JK_TAB
-}
+};
 const uint16_t PROGMEM ab_combo[] = {KC_A, KC_B, COMBO_END};
 const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END};
 
@@ -44,15 +44,15 @@ For a more complicated implementation, you can use the `process_combo_event` fun
 ```c
 enum combo_events {
   ZC_COPY,
-  ZV_PASTE
+  XV_PASTE
   };
 
 const uint16_t PROGMEM copy_combo[] = {KC_Z, KC_C, COMBO_END};
-const uint16_t PROGMEM paste_combo[] = {KC_Z, KC_V, COMBO_END};
+const uint16_t PROGMEM paste_combo[] = {KC_X, KC_V, COMBO_END};
 
 combo_t key_combos[COMBO_COUNT] = {
   [ZC_COPY] = COMBO_ACTION(copy_combo),
-  [ZV_PASTE] = COMBO_ACTION(paste_combo),
+  [XV_PASTE] = COMBO_ACTION(paste_combo),
 };
 
 void process_combo_event(uint8_t combo_index, bool pressed) {
@@ -66,7 +66,7 @@ void process_combo_event(uint8_t combo_index, bool pressed) {
       }
       break;
 
-    case ZV_PASTE:
+    case XV_PASTE:
       if (pressed) {
         register_code(KC_LCTL);
         register_code(KC_V);
@@ -78,7 +78,7 @@ void process_combo_event(uint8_t combo_index, bool pressed) {
 }
 ```
 
-This will send Ctrl+C if you hit Z and C, and Ctrl+V if you hit Z and V.  But you could change this to do stuff like change layers, play sounds, or change settings.
+This will send Ctrl+C if you hit Z and C, and Ctrl+V if you hit X and V.  But you could change this to do stuff like change layers, play sounds, or change settings.
 
 ## Additional Configuration
 

docs/feature_command.md

@@ -16,35 +16,35 @@ To use Command, hold down the key combination defined by the `IS_COMMAND()` macr
 
 If you would like to change the key assignments for Command, `#define` these in your `config.h` at either the keyboard or keymap level. All keycode assignments here must omit the `KC_` prefix.
 
-|Define                              |Default                                                                               |Description                                     |
-|------------------------------------|--------------------------------------------------------------------------------------|------------------------------------------------|
-|`IS_COMMAND()`                      |<code>(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                                |Set default layer with the Function row         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                                |Set default layer with the number keys          |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                               |Set default layer with `MAGIC_KEY_LAYER0..9`    |
-|`MAGIC_KEY_DEBUG`                   |`D`                                                                                   |Toggle debugging over serial                    |
-|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                                   |Toggle key matrix debugging                     |
-|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                                   |Toggle keyboard debugging                       |
-|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                                   |Toggle mouse debugging                          |
-|`MAGIC_KEY_CONSOLE`                 |`C`                                                                                   |Enable the Command console                      |
-|`MAGIC_KEY_VERSION`                 |`V`                                                                                   |Print the running QMK version to the console    |
-|`MAGIC_KEY_STATUS`                  |`S`                                                                                   |Print the current keyboard status to the console|
-|`MAGIC_KEY_HELP1`                   |`H`                                                                                   |Print Command help to the console               |
-|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                               |Print Command help to the console (alternate)   |
-|`MAGIC_KEY_LAYER0`                  |`0`                                                                                   |Make layer 0 the default layer                  |
-|`MAGIC_KEY_LAYER1`                  |`1`                                                                                   |Make layer 1 the default layer                  |
-|`MAGIC_KEY_LAYER2`                  |`2`                                                                                   |Make layer 2 the default layer                  |
-|`MAGIC_KEY_LAYER3`                  |`3`                                                                                   |Make layer 3 the default layer                  |
-|`MAGIC_KEY_LAYER4`                  |`4`                                                                                   |Make layer 4 the default layer                  |
-|`MAGIC_KEY_LAYER5`                  |`5`                                                                                   |Make layer 5 the default layer                  |
-|`MAGIC_KEY_LAYER6`                  |`6`                                                                                   |Make layer 6 the default layer                  |
-|`MAGIC_KEY_LAYER7`                  |`7`                                                                                   |Make layer 7 the default layer                  |
-|`MAGIC_KEY_LAYER8`                  |`8`                                                                                   |Make layer 8 the default layer                  |
-|`MAGIC_KEY_LAYER9`                  |`9`                                                                                   |Make layer 9 the default layer                  |
-|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                                 |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                               |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                               |Enter the bootloader                            |
-|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                                |Lock the keyboard so nothing can be typed       |
-|`MAGIC_KEY_EEPROM`                  |`E`                                                                                   |Clear the EEPROM                                |
-|`MAGIC_KEY_NKRO`                    |`N`                                                                                   |Toggle N-Key Rollover (NKRO)                    |
-|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                                   |Toggle LED when computer is sleeping            |
+|Define                              |Default                                                                    |Description                                     |
+|------------------------------------|---------------------------------------------------------------------------|------------------------------------------------|
+|`IS_COMMAND()`                      |<code>(get_mods() == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                     |Set default layer with the Function row         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                     |Set default layer with the number keys          |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                    |Set default layer with `MAGIC_KEY_LAYER0..9`    |
+|`MAGIC_KEY_DEBUG`                   |`D`                                                                        |Toggle debugging over serial                    |
+|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                        |Toggle key matrix debugging                     |
+|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                        |Toggle keyboard debugging                       |
+|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                        |Toggle mouse debugging                          |
+|`MAGIC_KEY_CONSOLE`                 |`C`                                                                        |Enable the Command console                      |
+|`MAGIC_KEY_VERSION`                 |`V`                                                                        |Print the running QMK version to the console    |
+|`MAGIC_KEY_STATUS`                  |`S`                                                                        |Print the current keyboard status to the console|
+|`MAGIC_KEY_HELP1`                   |`H`                                                                        |Print Command help to the console               |
+|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                    |Print Command help to the console (alternate)   |
+|`MAGIC_KEY_LAYER0`                  |`0`                                                                        |Make layer 0 the default layer                  |
+|`MAGIC_KEY_LAYER1`                  |`1`                                                                        |Make layer 1 the default layer                  |
+|`MAGIC_KEY_LAYER2`                  |`2`                                                                        |Make layer 2 the default layer                  |
+|`MAGIC_KEY_LAYER3`                  |`3`                                                                        |Make layer 3 the default layer                  |
+|`MAGIC_KEY_LAYER4`                  |`4`                                                                        |Make layer 4 the default layer                  |
+|`MAGIC_KEY_LAYER5`                  |`5`                                                                        |Make layer 5 the default layer                  |
+|`MAGIC_KEY_LAYER6`                  |`6`                                                                        |Make layer 6 the default layer                  |
+|`MAGIC_KEY_LAYER7`                  |`7`                                                                        |Make layer 7 the default layer                  |
+|`MAGIC_KEY_LAYER8`                  |`8`                                                                        |Make layer 8 the default layer                  |
+|`MAGIC_KEY_LAYER9`                  |`9`                                                                        |Make layer 9 the default layer                  |
+|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                      |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                    |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                    |Enter the bootloader                            |
+|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                     |Lock the keyboard so nothing can be typed       |
+|`MAGIC_KEY_EEPROM`                  |`E`                                                                        |Clear the EEPROM                                |
+|`MAGIC_KEY_NKRO`                    |`N`                                                                        |Toggle N-Key Rollover (NKRO)                    |
+|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                        |Toggle LED when computer is sleeping            |

docs/feature_debounce_type.md

@@ -0,0 +1,46 @@
+# Debounce algorithm
+
+QMK supports multiple debounce algorithms through its debounce API.
+
+The underlying debounce algorithm is determined by which matrix.c file you are using.
+
+The logic for which debounce method called is below. It checks various defines that you have set in rules.mk
+
+```
+DEBOUNCE_TYPE?= sym_g
+VALID_DEBOUNCE_TYPES := sym_g eager_pk custom
+ifeq ($(filter $(DEBOUNCE_TYPE),$(VALID_DEBOUNCE_TYPES)),)
+    $(error DEBOUNCE_TYPE="$(DEBOUNCE_TYPE)" is not a valid debounce algorithm)
+endif
+ifeq ($(strip $(DEBOUNCE_TYPE)), sym_g)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_sym_g.c
+else ifeq ($(strip $(DEBOUNCE_TYPE)), eager_pk)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_eager_pk.c
+endif
+```
+
+# Debounce selection
+
+| DEBOUNCE_ALGO    | Description                                                 | What to do                    |
+| -------------    | ---------------------------------------------------         | ----------------------------- |
+| Not defined      | You are using the included matrix.c and debounce.c          | Nothing. Debounce_sym_g will be compiled, and used if necessary |
+| custom           | Use your own debounce.c                                     | ```SRC += debounce.c``` add your own debounce.c and implement necessary functions |
+| sym_g / eager_pk | You are using the included matrix.c and debounce.c          | Use an alternative debounce algorithm |
+
+**Regarding split keyboards**: 
+The debounce code is compatible with split keyboards.
+
+# Use your own debouncing code
+* Set ```DEBOUNCE_TYPE = custom ```.
+* Add ```SRC += debounce.c```
+* Add your own ```debounce.c```. Look at included ```debounce_sym_g.c```s for sample implementations.
+* Debouncing occurs after every raw matrix scan.
+* Use num_rows rather than MATRIX_ROWS, so that split keyboards are supported correctly.
+
+# Changing between included debouncing methods
+You can either use your own code, by including your own debounce.c, or switch to another included one.
+Included debounce methods are:
+* debounce_eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` millseconds of no further input for that key
+* debounce_sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed.
+
+

docs/feature_encoders.md

@@ -13,7 +13,7 @@ and this to your `config.h`:
 Each PAD_A/B variable defines an array so multiple encoders can be defined, e.g.:
 
     #define ENCODERS_PAD_A { encoder1a, encoder2a }
-    #define ENCODERS_PAD_B { encoder1a, encoder2b }
+    #define ENCODERS_PAD_B { encoder1b, encoder2b }
 
 If your encoder's clockwise directions are incorrect, you can swap the A & B pad definitions.
 
@@ -32,15 +32,19 @@ The callback functions can be inserted into your `<keyboard>.c`:
 or `keymap.c`:
 
     void encoder_update_user(uint8_t index, bool clockwise) {
-        if (index == 0) {
-            if (clockwise) {
-                register_code(KC_PGDN);
-                unregister_code(KC_PGDN);
-            } else {
-                register_code(KC_PGUP);
-                unregister_code(KC_PGUP);
-            }
+      if (index == 0) { /* First encoder */
+        if (clockwise) {
+          tap_code(KC_PGDN);
+        } else {
+          tap_code(KC_PGUP);
         }
+      } else if (index == 1) { /* Second encoder
+        if (clockwise) {
+          tap_code(KC_UP);
+        } else {
+          tap_code(KC_DOWN);
+        }
+      }
     }
 
 ## Hardware

docs/feature_grave_esc.md

@@ -4,7 +4,11 @@ If you're using a 60% keyboard, or any other layout with no F-row, you will have
 
 ## Usage
 
-Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. When pressed it will behave like `KC_ESC`, but with Shift or GUI held it will send `KC_GRAVE`.
+Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. Most of the time this key will output `KC_ESC` when pressed. However, when Shift or GUI are held down it will output `KC_GRV` instead.
+
+## What Your OS Sees
+
+If Mary presses GESC on her keyboard, the OS will see an KC_ESC character. Now if Mary holds Shift down and presses GESC it will output `~`, or a shifted backtick. Now if she holds GUI/CMD/WIN, it will output a simple <code>&#96;</code> character.
 
 ## Keycodes
 
@@ -12,6 +16,10 @@ Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) w
 |---------|-----------|------------------------------------------------------------------|
 |`KC_GESC`|`GRAVE_ESC`|Escape when pressed, <code>&#96;</code> when Shift or GUI are held|
 
+### Caveats
+
+ * On macOS CMD/GUI + KC_GRV is actually mapped to a hot key so it will not output a backtick.
+
 ## Configuration
 
 There are several possible key combinations this will break, among them Control+Shift+Escape on Windows and Command+Option+Escape on macOS. To work around this, you can `#define` these options in your `config.h`:

docs/feature_layouts.md

@@ -51,6 +51,35 @@ The folder name must be added to the keyboard's `rules.mk`:
 
 but the `LAYOUT_<layout>` variable must be defined in `<folder>.h` as well.
 
+## Building a Keymap
+
+You should be able to build the keyboard keymap with a command in this format:
+
+    make <keyboard>:<layout>
+
+### Conflicting layouts
+When a keyboard supports multiple layout options,
+
+    LAYOUTS = ortho_4x4 ortho_4x12
+
+And a layout exists for both options,
+```
+layouts/
++ community/
+| + ortho_4x4/
+| | + <layout>/
+| | | + ...
+| + ortho_4x12/
+| | + <layout>/
+| | | + ...
+| + ...
+```
+
+The FORCE_LAYOUT argument can be used to specify which layout to build
+
+    make <keyboard>:<layout> FORCE_LAYOUT=ortho_4x4
+    make <keyboard>:<layout> FORCE_LAYOUT=ortho_4x12
+
 ## Tips for Making Layouts Keyboard-Agnostic
 
 ### Includes

docs/feature_leader_key.md

@@ -5,10 +5,11 @@ If you've ever used Vim, you know what a Leader key is. If not, you're about to
 That's what `KC_LEAD` does. Here's an example:
 
 1. Pick a key on your keyboard you want to use as the Leader key. Assign it the keycode `KC_LEAD`. This key would be dedicated just for this -- it's a single action key, can't be used for anything else.
-2. Include the line `#define LEADER_TIMEOUT 300` in your config.h. The 300 there is 300ms -- that's how long you have for the sequence of keys following the leader. You can tweak this value for comfort, of course.
-3. Within your `matrix_scan_user` function, do something like this:
+2. Include the line `#define LEADER_TIMEOUT 300` in your `config.h`. This sets the timeout for the `KC_LEAD` key.  Specifically, when you press the `KC_LEAD` key, you only have a certain amount of time to complete the Leader Key sequence.  The `300` here sets that to 300ms, and you can increase this value to give you more time to hit the sequence. But any keys pressed during this timeout are intercepted and not sent, so you may want to keep this value low. .  
+   * By default, this timeout is how long after pressing `KC_LEAD` to complete your entire sequence. This may be very low for some people. So you may want to increase this timeout.  Optionally, you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.  This allows you to maintain a low value here, but still be able to use the longer sequences.   To enable this option, add `#define LEADER_PER_KEY_TIMING` to your `config.h`.
+3. Within your `matrix_scan_user` function, add something like this:
 
-```
+```c
 LEADER_EXTERNS();
 
 void matrix_scan_user(void) {
@@ -44,6 +45,102 @@ Each of these accepts one or more keycodes as arguments. This is an important po
 
 To add support for Leader Key you simply need to add a single line to your keymap's `rules.mk`:
 
-```
+```make
 LEADER_ENABLE = yes
 ```
+
+## Per Key Timing on Leader keys
+
+Rather than relying on an incredibly high timeout for long leader key strings or those of us without 200wpm typing skills, we can enable per key timing to ensure that each key pressed provides us with more time to finish our stroke. This is incredibly helpful with leader key emulation of tap dance (read: multiple taps of the same key like C, C, C).
+
+In order to enable this, place this in your `config.h`:
+```c
+#define LEADER_PER_KEY_TIMING
+```
+
+After this, it's recommended that you lower your `LEADER_TIMEOUT` to something less that 300ms.
+
+```c
+#define LEADER_TIMEOUT 250
+```
+
+Now, something like this won't seem impossible to do without a 1000MS leader key timeout:
+
+```c
+SEQ_THREE_KEYS(KC_C, KC_C, KC_C) {
+  SEND_STRING("Per key timing is great!!!");
+}
+```
+
+## Strict Key Processing
+
+By default, the Leader Key feature will filter the keycode out of [`Mod-Tap`](feature_advanced_keycodes.md#mod-tap) and [`Layer Tap`](feature_advanced_keycodes.md#switching-and-toggling-layers) functions when checking for the Leader sequences. That means if you're using `LT(3, KC_A)`, it will pick this up as `KC_A` for the sequence, rather than `LT(3, KC_A)`, giving a more expected behavior for newer users.
+
+While, this may be fine for most, if you want to specify the whole keycode (eg, `LT(3, KC_A)` from the example above) in the sequence, you can enable this by added `#define LEADER_KEY_STRICT_KEY_PROCESSING` to your `config.h` file.  This well then disable the filtering, and you'll need to specify the whole keycode.
+
+## Customization 
+
+The Leader Key feature has some additional customization to how the Leader Key feature works.  It has two functions that can be called at certain parts of the process.  Namely `leader_start()` and `leader_end()`.
+
+The `leader_start()` function is called when you tap the `KC_LEAD` key, and the `leader_end()` function is called when either the leader sequence is completed, or the leader timeout is hit. 
+
+You can add these functions to your code (`keymap.c` usually) to add feedback to the Leader sequences (such as beeping or playing music).
+
+```c
+void leader_start(void) {
+  // sequence started
+}
+
+void leader_end(void) {
+  // sequence ended (no success/failuer detection)
+}
+```
+
+### Example
+
+This example will play the Mario "One Up" sound when you hit `KC_LEAD` to start the Leader Sequence, and will play "All Star" if it completes successfully or "Rick Roll" you if it fails. 
+
+```c
+bool did_leader_succeed;
+#ifdef AUDIO_ENABLE
+float leader_start[][2] = SONG(ONE_UP_SOUND );
+float leader_succeed[][2] = SONG(ALL_STAR);
+float leader_fail[][2] = SONG(RICK_ROLL);
+#endif
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+  LEADER_DICTIONARY() {
+    did_leader_succeed = leading = false;
+
+    SEQ_ONE_KEY(KC_E) {
+      // Anything you can do in a macro.
+      SEND_STRING(SS_LCTRL(SS_LSFT("t")));
+      did_leader_succeed = true;
+    } else 
+    SEQ_TWO_KEYS(KC_E, KC_D) {
+      SEND_STRING(SS_LGUI("r")"cmd"SS_TAP(KC_ENTER)SS_LCTRL("c"));
+      did_leader_succeed = true;
+    }
+    leader_end();
+  }
+}
+
+void leader_start(void) {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_start);
+#endif
+}
+
+void leader_end(void) {
+  if (did_leader_succeed) {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_succeed);
+#endif
+  } else {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_fail);
+#endif
+  }
+}
+```

docs/feature_led_matrix.md

@@ -0,0 +1,90 @@
+# LED Matrix Lighting
+
+This feature allows you to use LED matrices driven by external drivers. It hooks into the backlight system so you can use the same keycodes as backlighting to control it.
+
+If you want to use RGB LED's you should use the [RGB Matrix Subsystem](feature_rgb_matrix.md) instead.
+
+## Driver configuration
+
+### IS31FL3731
+
+There is basic support for addressable LED matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
+
+    LED_MATRIX_ENABLE = IS31FL3731
+    
+You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `LED_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
+| `LED_DRIVER_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
+| `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | |
+| `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | |
+| `LED_DRIVER_ADDR_3` | (Optional) Address for the third LED driver | |
+| `LED_DRIVER_ADDR_4` | (Optional) Address for the fourth LED driver | |
+
+Here is an example using 2 drivers.
+
+	// This is a 7-bit address, that gets left-shifted and bit 0
+	// set to 0 for write, 1 for read (as per I2C protocol)
+	// The address will vary depending on your wiring:
+	// 0b1110100 AD <-> GND
+	// 0b1110111 AD <-> VCC
+	// 0b1110101 AD <-> SCL
+	// 0b1110110 AD <-> SDA
+	#define LED_DRIVER_ADDR_1 0b1110100
+	#define LED_DRIVER_ADDR_2 0b1110110
+
+	#define LED_DRIVER_COUNT 2
+	#define LED_DRIVER_1_LED_COUNT 25
+	#define LED_DRIVER_2_LED_COUNT 24
+	#define LED_DRIVER_LED_COUNT LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL
+
+Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
+
+Define these arrays listing all the LEDs in your `<keyboard>.c`:
+
+	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+	/* Refer to IS31 manual for these locations
+	 *   driver
+	 *   |  LED address
+	 *   |  | */
+	    {0, C3_3},
+	    ....
+	}
+
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731-simple.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` ).
+
+## Keycodes
+
+All LED matrix keycodes are currently shared with the [backlight system](feature_backlight.md).
+
+## LED Matrix Effects
+
+Currently no LED matrix effects have been created.
+
+## Custom layer effects
+
+Custom layer effects can be done by defining this in your `<keyboard>.c`:
+
+    void led_matrix_indicators_kb(void) {
+        led_matrix_set_index_value(index, value);
+    }
+
+A similar function works in the keymap as `led_matrix_indicators_user`.
+
+## Suspended state
+
+To use the suspend feature, add this to your `<keyboard>.c`:
+
+	void suspend_power_down_kb(void)
+	{
+	    led_matrix_set_suspend_state(true);
+	}
+
+	void suspend_wakeup_init_kb(void)
+	{
+	    led_matrix_set_suspend_state(false);
+	}

docs/feature_macros.md

@@ -12,24 +12,28 @@ Here is an example `keymap.c` for a two-key keyboard:
 
 ```c
 enum custom_keycodes {
-	MY_CUSTOM_MACRO = SAFE_RANGE
+  QMKBEST = SAFE_RANGE,
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	if (record->event.pressed) {
-		switch(keycode) {
-			case MY_CUSTOM_MACRO:
-				SEND_STRING("QMK is the best thing ever!"); // this is our macro!
-				return false;
-		}
-	}
-	return true;
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+
+  }
+  return true;
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = {
-	  {MY_CUSTOM_MACRO, KC_ESC}
-	}
+  [0] = {
+    {QMKBEST, KC_ESC}
+  }
 };
 ```
 
@@ -37,7 +41,7 @@ What happens here is this:
 We first define a new custom keycode in the range not occupied by any other keycodes.
 Then we use the `process_record_user` function, which is called whenever a key is pressed or released, to check if our custom keycode has been activated.
 If yes, we send the string `"QMK is the best thing ever!"` to the computer via the `SEND_STRING` macro (this is a C preprocessor macro, not to be confused with QMK macros).
-We return `false` to indicate to the caller that the key press we just processed need not be processed any further.
+We return `true` to indicate to the caller that the key press we just processed should continue to be processed as normal (as we didn't replace or alter the functionality).
 Finally, we define the keymap so that the first button activates our macro and the second button is just an escape button.
 
 You might want to add more than one macro.
@@ -45,28 +49,42 @@ You can do that by adding another keycode and adding another case to the switch
 
 ```c
 enum custom_keycodes {
-	MY_CUSTOM_MACRO = SAFE_RANGE,
-	MY_OTHER_MACRO
+  QMKBEST = SAFE_RANGE,
+  QMKURL,
+  MY_OTHER_MACRO
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	if (record->event.pressed) {
-		switch(keycode) {
-			case MY_CUSTOM_MACRO:
-				SEND_STRING("QMK is the best thing ever!");
-				return false;
-			case MY_OTHER_MACRO:
-				SEND_STRING(SS_LCTRL("ac")); // selects all and copies
-				return false;
-		}
-	}
-	return true;
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+    case MY_OTHER_MACRO:
+      if (record->event.pressed) {
+                SEND_STRING(SS_LCTRL("ac")); // selects all and copies
+      }
+      break;
+  }
+  return true;
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = {
-	  {MY_CUSTOM_MACRO, MY_OTHER_MACRO}
-	}
+  [0] = {
+    {MY_CUSTOM_MACRO, MY_OTHER_MACRO}
+  }
 };
 ```
 
@@ -136,21 +154,21 @@ By default QMK assumes you don't have any macros. To define your macros you crea
 
 ```c
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-	if (record->event.pressed) {
-		switch(id) {
-			case 0:
-				return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
-			case 1:
-				return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
-		}
-	}
-	return MACRO_NONE;
+    if (record->event.pressed) {
+        switch(id) {
+            case 0:
+                return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
+            case 1:
+                return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
+        }
+    }
+    return MACRO_NONE;
 };
 ```
 
 This defines two macros which will be run when the key they are assigned to is pressed. If instead you'd like them to run when the key is released you can change the if statement:
 
-	if (!record->event.pressed) {
+    if (!record->event.pressed) {
 
 ### Macro Commands
 
@@ -169,21 +187,21 @@ Use the `M()` function within your `KEYMAP()` to call a macro. For example, here
 
 ```c
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = KEYMAP(
-		M(0), M(1)
-	),
+    [0] = KEYMAP(
+        M(0), M(1)
+    ),
 };
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-	if (record->event.pressed) {
-		switch(id) {
-			case 0:
-				return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
-			case 1:
-				return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
-		}
-	}
-	return MACRO_NONE;
+    if (record->event.pressed) {
+        switch(id) {
+            case 0:
+                return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
+            case 1:
+                return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
+        }
+    }
+    return MACRO_NONE;
 };
 ```
 
@@ -198,9 +216,9 @@ If you have a bunch of macros you want to refer to from your keymap while keepin
 #define M_BYE M(1)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = KEYMAP(
-		M_HI, M_BYE
-	),
+    [0] = KEYMAP(
+        M_HI, M_BYE
+    ),
 };
 ```
 
@@ -213,11 +231,11 @@ There are some functions you may find useful in macro-writing. Keep in mind that
 This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is
 
 ```c
-	if (record->event.pressed) {
-		// on keydown
-	} else {
-		// on keyup
-	}
+    if (record->event.pressed) {
+        // on keydown
+    } else {
+        // on keyup
+    }
 ```
 
 ### `register_code(<kc>);`
@@ -232,6 +250,8 @@ Parallel to `register_code` function, this sends the `<kc>` keyup event to the c
 
 This will send `register_code(<kc>)` and then `unregister_code(<kc>)`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it).
 
+If you're having issues with taps (un)registering, you can add a delay between the register and unregister events by setting `#define TAP_CODE_DELAY 100` in your `config.h` file. The value is in milliseconds.
+
 ### `clear_keyboard();`
 
 This will clear all mods and keys currently pressed.
@@ -250,16 +270,16 @@ This example defines a macro which sends `Ctrl-C` when pressed down, and `Ctrl-V
 
 ```c
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-	switch(id) {
-		case 0: {
-			if (record->event.pressed) {
-				return MACRO( D(LCTL), T(C), U(LCTL), END  );
-			} else {
-				return MACRO( D(LCTL), T(V), U(LCTL), END  );
-			}
-			break;
-		}
-	}
-	return MACRO_NONE;
+    switch(id) {
+        case 0: {
+            if (record->event.pressed) {
+                return MACRO( D(LCTL), T(C), U(LCTL), END  );
+            } else {
+                return MACRO( D(LCTL), T(V), U(LCTL), END  );
+            }
+            break;
+        }
+    }
+    return MACRO_NONE;
 };
 ```

docs/feature_rgb_matrix.md

@@ -1,5 +1,9 @@
 # RGB Matrix Lighting
 
+This feature allows you to use RGB LED matrices driven by external drivers. It hooks into the RGBLIGHT system so you can use the same keycodes as RGBLIGHT to control it.
+
+If you want to use single color LED's you should use the [LED Matrix Subsystem](feature_led_matrix.md) instead.
+
 ## Driver configuration
 
 ### IS31FL3731
@@ -150,6 +154,30 @@ These are the effects that are currently available:
 	#endif
 	    RGB_MATRIX_EFFECT_MAX
 	};
+    
+You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`:
+
+
+|Define                                             |Description                                 |
+|---------------------------------------------------|--------------------------------------------|
+|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS`           |Disables `RGB_MATRIX_ALPHAS_MODS`           |
+|`#define DISABLE_RGB_MATRIX_DUAL_BEACON`           |Disables `RGB_MATRIX_DUAL_BEACON`           |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN`      |Disables `RGB_MATRIX_GRADIENT_UP_DOWN`      |
+|`#define DISABLE_RGB_MATRIX_RAINDROPS`             |Disables `RGB_MATRIX_RAINDROPS`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_ALL`             |Disables `RGB_MATRIX_CYCLE_ALL`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`      |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`      |
+|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`         |Disables `RGB_MATRIX_CYCLE_UP_DOWN`         |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`        |Disables `RGB_MATRIX_RAINBOW_BEACON`        |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`     |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`     |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|
+|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`   |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`   |
+|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`          |Disables `RGB_MATRIX_DIGITAL_RAIN`          |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`        |Disables `RGB_MATRIX_SOLID_REACTIVE`        |
+|`#define DISABLE_RGB_MATRIX_SPLASH`                |Disables `RGB_MATRIX_SPLASH`                |
+|`#define DISABLE_RGB_MATRIX_MULTISPLASH`           |Disables `RGB_MATRIX_MULTISPLASH`           |
+|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`          |Disables `RGB_MATRIX_SOLID_SPLASH`          |
+|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH`     |Disables `RGB_MATRIX_SOLID_MULTISPLASH`     |
+
 
 ## Custom layer effects
 

docs/feature_rgblight.md

@@ -63,8 +63,6 @@ Changing the **Value** sets the overall brightness.
 |`RGB_MODE_GRADIENT`|`RGB_M_G` |Static gradient animation mode                                      |
 |`RGB_MODE_RGBTEST` |`RGB_M_T` |Red, Green, Blue test animation mode                                |
 
-?> For backwards compatibility, `RGB_SMOD` is another alias of `RGB_MOD`.
-
 ## Configuration
 
 Your RGB lighting can be configured by placing these `#define`s in your `config.h`:
@@ -122,6 +120,7 @@ The following options can be used to tweak the various animations:
 |`RGBLIGHT_EFFECT_KNIGHT_LED_NUM`    |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel                             |
 |`RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL`|`1000`       |How long to wait between light changes for the "Christmas" animation, in milliseconds|
 |`RGBLIGHT_EFFECT_CHRISTMAS_STEP`    |`2`          |The number of LEDs to group the red/green colors by for the "Christmas" animation    |
+|`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`360`        |Range adjustment for the rainbow swirl effect to get different swirls                |
 
 You can also modify the speeds that the different modes animate at:
 
@@ -149,19 +148,43 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
 
 If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:
 
-|Function                           |Description                                                                                                                                                            |
-|-----------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------|
-|`rgblight_enable()`                |Turn LEDs on, based on their previous state                                                                                                                            |
-|`rgblight_enable_noeeprom()`       |Turn LEDs on, based on their previous state (not written to EEPROM)                                                                                                    |
-|`rgblight_disable()`               |Turn LEDs off                                                                                                                                                          |
-|`rgblight_disable_noeeprom()`      |Turn LEDs off (not written to EEPROM)                                                                                                                                  |
-|`rgblight_mode(x)`                 |Set the mode, if RGB animations are enabled                                                                                                                            |
-|`rgblight_mode_noeeprom(x)`        |Set the mode, if RGB animations are enabled (not written to EEPROM)                                                                                                    |
-|`rgblight_setrgb(r, g, b)`         |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                                                    |
-|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)                       |
-|`rgblight_sethsv(h, s, v)`         |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255                                                                   |
-|`rgblight_sethsv_noeeprom(h, s, v)`|Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM)                                           |
-|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|Function                                    |Description                                                                                                                                                   |
+|--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`rgblight_enable()`                         |Turn LEDs on, based on their previous state                                                                                                                   |
+|`rgblight_enable_noeeprom()`                |Turn LEDs on, based on their previous state (not written to EEPROM)                                                                                           |
+|`rgblight_disable()`                        |Turn LEDs off                                                                                                                                                 |
+|`rgblight_disable_noeeprom()`               |Turn LEDs off (not written to EEPROM)                                                                                                                         |
+|`rgblight_mode(x)`                          |Set the mode, if RGB animations are enabled                                                                                                                   |
+|`rgblight_mode_noeeprom(x)`                 |Set the mode, if RGB animations are enabled (not written to EEPROM)                                                                                           |
+|`rgblight_setrgb(r, g, b)`                  |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                                           |
+|`rgblight_setrgb_at(r, g, b, led)`          |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)              |
+|`rgblight_setrgb_range(r, g, b, start, end)`|Set a continuous range of LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_setrgb_master(r, g, b)`           |Set the LEDs on the master side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                      |
+|`rgblight_setrgb_slave(r, g, b)`            |Set the LEDs on the slave side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                       |
+|`rgblight_sethsv(h, s, v)`                  |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255                                                          |
+|`rgblight_sethsv_noeeprom(h, s, v)`         |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM)                                  |
+|`rgblight_sethsv_at(h, s, v, led)`          |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_sethsv_master(h, s, v)`           |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                 |
+|`rgblight_sethsv_slave(h, s, v)`            |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                  |
+|`rgblight_toggle()`                         |Toggle all LEDs between on and off                                                                                                                            |
+|`rgblight_toggle_noeeprom()`                |Toggle all LEDs between on and off (not written to EEPROM)                                                                                                    |
+|`rgblight_step()`                           |Change the mode to the next RGB animation in the list of enabled RGB animations                                                                               |
+|`rgblight_step_noeeprom()`                  |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                       |
+|`rgblight_step_reverse()`                   |Change the mode to the previous RGB animation in the list of enabled RGB animations                                                                           |
+|`rgblight_step_reverse_noeeprom()`          |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                   |
+|`rgblight_increase_hue()`                   |Increase the hue for all LEDs. This wraps around at maximum hue                                                                                               |
+|`rgblight_increase_hue_noeeprom()`          |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM)                                                                       |
+|`rgblight_decrease_hue()`                   |Decrease the hue for all LEDs. This wraps around at minimum hue                                                                                               |
+|`rgblight_decrease_hue_noeeprom()`          |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM)                                                                       |
+|`rgblight_increase_sat()`                   |Increase the saturation for all LEDs. This wraps around at maximum saturation                                                                                 |
+|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM)                                                         |
+|`rgblight_decrease_sat()`                   |Decrease the saturation for all LEDs. This wraps around at minimum saturation                                                                                 |
+|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM)                                                         |
+|`rgblight_increase_val()`                   |Increase the value for all LEDs. This wraps around at maximum value                                                                                           |
+|`rgblight_increase_val_noeeprom()`          |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM)                                                                   |
+|`rgblight_decrease_val()`                   |Decrease the value for all LEDs. This wraps around at minimum value                                                                                           |
+|`rgblight_decrease_val_noeeprom()`          |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM)                                                                   |
 
 Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list!
 

docs/feature_space_cadet_shift.md

@@ -25,9 +25,13 @@ COMMAND_ENABLE = no
 
 By default Space Cadet assumes a US ANSI layout, but if your layout uses different keys for parentheses, you can redefine them in your `config.h`.
 You can also disable the rollover, allowing you to use the opposite Shift key to cancel the Space Cadet state in the event of an erroneous press, instead of emitting a pair of parentheses when the keys are released.
+Also, by default, the Space Cadet applies modifiers LSPO_MOD and RSPC_MOD to keys defined by LSPO_KEY and RSPC_KEY. You can override this behavior by redefining those variables in your `config.h`. You can also prevent the Space Cadet to apply a modifier by defining DISABLE_SPACE_CADET_MODIFIER in your `config.h`.
 
-|Define                        |Default      |Description                                                 |
-|------------------------------|-------------|------------------------------------------------------------|
-|`LSPO_KEY`                    |`KC_9`       |The keycode to send when Left Shift is tapped               |
-|`RSPC_KEY`                    |`KC_0`       |The keycode to send when Right Shift is tapped              |
-|`DISABLE_SPACE_CADET_ROLLOVER`|*Not defined*|If defined, use the opposite Shift key to cancel Space Cadet|
+|Define                        |Default      |Description                                                                     |
+|------------------------------|-------------|--------------------------------------------------------------------------------|
+|`LSPO_KEY`                    |`KC_9`       |The keycode to send when Left Shift is tapped                                   |
+|`RSPC_KEY`                    |`KC_0`       |The keycode to send when Right Shift is tapped                                  |
+|`LSPO_MOD`                    |`KC_LSFT`    |The keycode to send when Left Shift is tapped                                   |
+|`RSPC_MOD`                    |`KC_RSFT`    |The keycode to send when Right Shift is tapped                                  |
+|`DISABLE_SPACE_CADET_ROLLOVER`|*Not defined*|If defined, use the opposite Shift key to cancel Space Cadet                    |
+|`DISABLE_SPACE_CADET_MODIFIER`|*Not defined*|If defined, prevent the Space Cadet to apply a modifier to LSPO_KEY and RSPC_KEY|

docs/feature_tap_dance.md

@@ -185,29 +185,11 @@ Below is a specific example:
 
 ## Setup
 
-You will need a few things that can be used for 'Quad Function Tap-Dance'. The suggested setup is to create a user directory for yourself. This directory will contain rules.mk `<your_name>.c` and `<your_name>.h`. This directory should be called `<your_name>`, and located in the top level `users` directory. There should already be a few examples to look at there.
+You will need a few things that can be used for 'Quad Function Tap-Dance'. 
 
-### In `/qmk_firmware/users/<your_name>/rules.mk`
-
-Put the following:
-```c
-TAP_DANCE_ENABLE = yes
-SRC += your_name.c
-```
-
-Pretty simple. It is a nice way to keep some rules common on all your keymaps.
-
-
-### In `/qmk_firmware/users/<your_name>/<your_name>.h`
-
-You will need a few things in this file:
+You'll need to add these to the top of your `keymap.c` file, before your keymap. 
 
 ```c
-#pragma once
-
-#include "quantum.h"
-#include "process_keycode/process_tap_dance.h"
-
 typedef struct {
   bool is_press_action;
   int state;
@@ -234,18 +216,12 @@ int cur_dance (qk_tap_dance_state_t *state);
 //for the x tap dance. Put it here so it can be used in any keymap
 void x_finished (qk_tap_dance_state_t *state, void *user_data);
 void x_reset (qk_tap_dance_state_t *state, void *user_data);
+
 ```
 
-### In `/qmk_firmware/users/<your_name>/<your_name>.c`
-
-And then in your user's `.c` file you implement the functions above:
+Now, at the bottom of your `keymap.c` file, you'll need to add the following: 
 
 ```c
-#include "<your_name>.h"
-#include "quantum.h"
-#include "action.h"
-#include "process_keycode/process_tap_dance.h"
-
 /* Return an integer that corresponds to what kind of tap dance should be executed.
  *
  * How to figure out tap dance state: interrupted and pressed.
@@ -335,4 +311,6 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 };
 ```
 
-And then simply use `TD(X_CTL)` anywhere in your keymap after including `<your_name>.h`.
+And then simply use `TD(X_CTL)` anywhere in your keymap.
+
+If you want to implement this in your userspace, then you may want to check out how [DanielGGordon](https://github.com/qmk/qmk_firmware/tree/master/users/gordon) has implemented this in their userspace.

docs/feature_unicode.md

@@ -1,94 +1,154 @@
 # Unicode Support
 
-There are three Unicode keymap definition method available in QMK:
+There are three Unicode keymap definition methods available in QMK:
 
-## UNICODE_ENABLE
+## `UNICODE_ENABLE`
 
-Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in keymap file, where *n* is a 4 digit hexadecimal.
+Supports Unicode up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. The keycode function is `UC(c)` in the keymap file, where _c_ is the code point's number (preferably hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`.
 
-## UNICODEMAP_ENABLE
+## `UNICODEMAP_ENABLE`
 
-Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(n)` where *n* is the array index of the mapping table.
+Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(i)`, where _i_ is an array index into the mapping table. The table may contain at most 1024 entries.
 
-And you may want to have an enum to make reference easier.  So you'd want to add something like this to your keymap:
+You may want to have an enum to make referencing easier. So, you could add something like this to your keymap file:
 
 ```c
-enum unicode_name {
-  BANG, // ‽
-  IRONY, // ⸮
-  SNEK // snke 🐍
+enum unicode_names {
+  BANG,
+  IRONY,
+  SNEK,
 };
 
 const uint32_t PROGMEM unicode_map[] = {
-  [BANG]      = 0x0203D, // ‽
-  [IRONY]     = 0x02E2E, // ⸮
-  [SNEK]      = 0x1F40D // snke 🐍
-}:
+  [BANG]  = 0x203D,  // ‽
+  [IRONY] = 0x2E2E,  // ⸮
+  [SNEK]  = 0x1F40D, // 🐍
+};
 ```
 
-Make sure that the order for both matches.
+Then you can use `X(BANG)` etc. in your keymap.
 
-## UCIS_ENABLE
+## `UCIS_ENABLE`
 
-Supports Unicode up to 0xFFFFFFFF. As with `UNICODE_MAP`, you may want to main a mapping table in your keymap file.  However, there is no keycodes for this feature, you will have to add a keycode or function to call `qk_ucis_start()`. Once you've run that, you can just type the text for your unicode, and then hit space or enter to complete it, or ESC to cancel it. And if it matches an entry in your table, it will automatically "backspace" the trigger word (from your table) and then will input the unicode sequence.
+Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you will have to add a keycode or function that calls `qk_ucis_start()`. Once this function's been called, you can type the corresponding mnemonic for your character, then hit Space or Enter to complete it, or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode character inserted.
 
-For instance, you would need to have a table like this in your keymap:
+For instance, you would define a table like this in your keymap file:
 
 ```c
-const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
-(
- UCIS_SYM("poop", 0x1f4a9),
- UCIS_SYM("rofl", 0x1f923),
- UCIS_SYM("kiss", 0x1f619)
+const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE(
+  UCIS_SYM("poop", 0x1F4A9), // 💩
+  UCIS_SYM("rofl", 0x1F923), // 🤣
+  UCIS_SYM("kiss", 0x1F619)  // 😙
 );
 ```
 
-You run the function, and then type "rofl" and hit enter, it should backspace remove "rofl" and input the `0x1f923` unicode.
+You call `qk_ucis_start()`, then type "rofl" and hit Enter. QMK should erase the "rofl" text and input the laughing emoji.
 
 ### Customization
 
-There are several functions that you can add to your keymap to customize the functionality of this feature.
+There are several functions that you can define in your keymap to customize the functionality of this feature.
 
-* `void qk_ucis_start_user(void)` - This runs when you run the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
-* `void qk_ucis_success(uint8_t symbol_index)` - This runs when the unicode input has matched something, and has completed. Default doesn't do anything.
-* `void qk_ucis_symbol_fallback (void)` - This runs if the input text doesn't match anything.  The default function falls back to trying that input as a unicode code.
+* `void qk_ucis_start_user(void)` – This runs when you call the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
+* `void qk_ucis_success(uint8_t symbol_index)` – This runs when the input has matched something and has completed. By default, it doesn't do anything.
+* `void qk_ucis_symbol_fallback (void)` – This runs when the input doesn't match anything. By default, it falls back to trying that input as a Unicode code.
 
-The default code for these are:
+You can find the default implementations of these functions in [`process_ucis.c`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_ucis.c).
+
+## Input Modes
+
+Unicode input in QMK works by inputting a sequence of characters to the OS, sort of like a macro. Unfortunately, the way this is done differs for each platform. Specifically, each platform requires a different combination of keys to trigger Unicode input. Therefore, a corresponding input mode has to be set in QMK.
+
+The following input modes are available:
+
+* **`UC_OSX`**: Mac OS X built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with `UNICODEMAP`).
+
+  To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar.
+  By default, this mode uses the left Option key (`KC_LALT`), but this can be changed by defining [`UNICODE_OSX_KEY`](#input-key-configuration) with another keycode.
+
+* **`UC_LNX`**: Linux built-in IBus Unicode input. Supports code points up to `0x10FFFF` (all possible code points).
+
+  Enabled by default and works almost anywhere on IBus-enabled distros. Without IBus, this mode works under GTK apps, but rarely anywhere else.
+
+* **`UC_WIN`**: _(not recommended)_ Windows built-in hex numpad Unicode input. Supports code points up to `0xFFFF`.
+
+  To enable, create a registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad` and set its value to `1`. This can be done from the Command Prompt by running `reg add "HKCU\Control Panel\Input Method" -v EnableHexNumpad -t REG_SZ -d 1` with administrator privileges. Afterwards, reboot.
+  This mode is not recommended because of reliability and compatibility issues; use the `UC_WINC` mode instead.
+
+* **`UC_BSD`**: _(non implemented)_ Unicode input under BSD. Not implemented at this time. If you're a BSD user and want to help add support for it, please [open an issue on GitHub](https://github.com/qmk/qmk_firmware/issues).
+
+* **`UC_WINC`**: Windows Unicode input using [WinCompose](https://github.com/samhocevar/wincompose). As of v0.8.2, supports code points up to `0xFFFFF` (all currently assigned code points).
+
+  To enable, install the [latest release](https://github.com/samhocevar/wincompose/releases/latest). Once installed, WinCompose will automatically run on startup. Works reliably under all version of Windows supported by the app.
+  By default, this mode uses the right Alt key (`KC_RALT`), but this can be changed in the WinCompose settings and by defining [`UNICODE_WINC_KEY`](#input-key-configuration) with another keycode.
+
+### Switching Input Modes
+
+There are two ways to set the input mode for Unicode: by keycode or by function. Keep in mind that both methods write to persistent storage (EEPROM), and are loaded each time the keyboard starts. So once you've set it the first time, you don't need to set it again unless you want to change it, or you've reset the EEPROM settings.
+
+You can switch the input mode at any time by using one of the following keycodes. The easiest way is to add the ones you use to your keymap.
+
+|Keycode                |Alias    |Input mode   |Description                              |
+|-----------------------|---------|-------------|-----------------------------------------|
+|`UNICODE_MODE_FORWARD` |`UC_MOD` |             |Cycles forwards through the available modes. [(Disabled by default)](#input-method-cycling)|
+|`UNICODE_MODE_REVERSE` |`UC_RMOD`|             |Cycles forwards through the available modes. [(Disabled by default)](#input-method-cycling)|
+|`UNICODE_MODE_OSX`     |`UC_M_OS`|`UC_OSX`     |Switch to Mac OS X input.                |
+|`UNICODE_MODE_LNX`     |`UC_M_LN`|`UC_LNX`     |Switch to Linux input.                   |
+|`UNICODE_MODE_WIN`     |`UC_M_WI`|`UC_WIN`     |Switch to Windows input.                 |
+|`UNICODE_MODE_BSD`     |`UC_M_BS`|`UC_BSD`     |Switch to BSD input (not implemented).   |
+|`UNICODE_MODE_WINC`    |`UC_M_WC`|`UC_WINC`    |Switch to Windows input using WinCompose.|
+
+You can also switch the input mode by calling `set_unicode_input_mode(x)` in your code, where _x_ is one of the above input mode constants (e.g. `UC_LNX`). Since the function only needs to be called once, it's recommended that you do it in `eeconfig_init_user` (or a similar function). For example:
 
 ```c
-void qk_ucis_start_user(void) { // outputs keyboard emoji
-  unicode_input_start();
-  register_hex(0x2328);
-  unicode_input_finish();
-}
-
-void qk_ucis_success(uint8_t symbol_index) {
-}
-
-void qk_ucis_symbol_fallback (void) { // falls back to manual unicode entry
-  for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) {
-    uint8_t code = qk_ucis_state.codes[i];
-    register_code(code);
-    unregister_code(code);
-    wait_ms(UNICODE_TYPE_DELAY);
-  }
+void eeconfig_init_user(void) {
+  set_unicode_input_mode(UC_LNX);
 }
 ```
 
-## Unicode Input methods
+### Audio Feedback
 
-Unicode input in QMK works by inputting a sequence of characters to the OS,
-sort of like macro. Unfortunately, each OS has different ideas on how Unicode is input.
+If you have the [Audio feature](feature_audio.md) enabled on the board, you can set melodies to be played when you press the above keys. That way you can have some audio feedback when switching input modes.
 
-This is the current list of Unicode input method in QMK:
+For instance, you can add these definitions to your `config.h` file:
 
-* __UC_OSX__: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
-* __UC_OSX_RALT__: Same as UC_OSX, but sends the Right Alt key for unicode input
-* __UC_LNX__: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
-* __UC_WIN__: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
-* __UC_WINC__: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
+```c
+#define UNICODE_SONG_OSX  COIN_SOUND
+#define UNICODE_SONG_LNX  UNICODE_LINUX
+#define UNICODE_SONG_BSD  MARIO_GAMEOVER
+#define UNICODE_SONG_WIN  UNICODE_WINDOWS
+#define UNICODE_SONG_WINC UNICODE_WINDOWS
+```
 
-At some point, you need to call `set_unicode_input_mode(x)` to set the correct unicode method.  This sets the method that is used to send the unicode, and stores it in EEPROM, so you only need to call this once.
+### Additional Customization
+
+Because Unicode is such a large and variable feature, there are a number of options that you can customize to work better on your system. 
+
+#### Start and Finish input functions
+
+The functions for starting and finishing Unicode input on your platform can be overridden locally. Possible uses include customizing input mode behavior if you don't use the default keys, or adding extra visual/audio feedback to Unicode input.
+
+* `void unicode_input_start(void)` – This sends the initial sequence that tells your platform to enter Unicode input mode. For example, it presses Ctrl+Shift+U on Linux and holds the Option key on Mac.
+* `void unicode_input_finish(void)` – This is called to exit Unicode input mode, for example by pressing Space or releasing the Option key.
+
+You can find the default implementations of these functions in [`process_unicode_common.c`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_unicode_common.c).
+
+
+#### Input Key Configuration
+
+Additionally, you can customize the keys used to trigger the unicode input for macOS and WinCompose by adding defines to your `config.h`
+
+```c
+#define UNICODE_OSX_KEY  KC_LALT
+#define UNICODE_WINC_KEY KC_RALT
+```
+
+#### Input Method Cycling
+
+Also, you can choose which input methods are availble for cycling through.  By default, this is disabled. But if you want to enabled it, then limiting it to just those modes makes sense.  Note that `UNICODE_SELECTED_MODES` define is comma delimited.
+
+```c
+#define UNICODE_SELECTED_MODES UC_OSX, UC_LNX, UC_WIN, UC_BSD, UC_WINC
+```
 
 ## `send_unicode_hex_string`
 

docs/features.md

@@ -8,13 +8,18 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Auto Shift](feature_auto_shift.md) - Tap for the normal key, hold slightly longer for its shifted state.
 * [Backlight](feature_backlight.md) - LED lighting support for your keyboard.
 * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys.
+* [Combos](feature_combo.md) - Custom actions for multiple key holds.
+* [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic").
 * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
+* [Encoders](feature_encoders.md) - Rotary encoders! 
+* [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. 
 * [HD44780 LCD Display](feature_hd44780.md) - Support for LCD character displays using the HD44780 standard.
 * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state.
 * [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout.
 * [Leader Key](feature_leader_key.md) - Tap the leader key followed by a sequence to trigger custom behavior.
 * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key.
 * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard.
+* [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it.
 * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard.
 * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard.
 * [RGB Light](feature_rgblight.md) - RGB lighting for your keyboard.

docs/flashing.md

@@ -71,8 +71,8 @@ Flashing sequence:
 
 1. Press the `RESET` keycode, or short RST to GND quickly (you only have 7 seconds to flash once it enters)
 2. Wait for the OS to detect the device
-4. Flash a .hex file
-5. Wait for the device to reset automatically
+3. Flash a .hex file
+4. Wait for the device to reset automatically
 
 or
 
@@ -106,5 +106,28 @@ Flashing sequence:
 
 1. Press the `RESET` keycode, or short RST to GND quickly (you only have 7 seconds to flash once it enters)
 2. Wait for the OS to detect the device
-4. Flash a .hex file
-5. Reset the device into application mode (may be done automatically)
+3. Flash a .hex file
+4. Reset the device into application mode (may be done automatically)
+
+## STM32
+
+All STM32 chips come preloaded with a factory bootloader that cannot be modified nor deleted. Some STM32 chips have bootloaders that do not come with USB programming (e.g. STM32F103) but the process is still the same.
+
+At the moment, no `BOOTLOADER` variable is needed on `rules.mk` for STM32.
+
+Compatible flashers:
+
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
+* [dfu-util](https://github.com/Stefan-Schmidt/dfu-util) / `:dfu-util` (recommended command line)
+
+Flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `RESET` keycode (may not work on STM32F042 devices)
+    * If a reset circuit is present, tap the RESET button
+    * Otherwise, you need to bridge BOOT0 to VCC (via BOOT0 button or bridge), short RESET to GND (via RESET button or bridge), and then let go of the BOOT0 bridge
+2. Wait for the OS to detect the device
+3. Flash a .bin file
+    * You will receive a warning about the DFU signature; Just ignore it
+4. Reset the device into application mode (may be done automatically)
+    * If you are building from command line (e.g. `make planck/rev6:default:dfu-util`), make sure that `:leave` is passed to the `DFU_ARGS` variable inside your `rules.mk` (e.g. `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) so that your device resets after flashing

docs/getting_started_build_tools.md

@@ -41,6 +41,12 @@ Debian / Ubuntu example:
 Fedora / Red Hat example:
 
     sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
+    
+Arch / Manjaro example:
+
+    pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git
+
+(the `dfu-programmer` package is availble on AUR only so you should download from there or use an AUR helper)
 
 ## Nix
 
@@ -57,6 +63,7 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
     brew tap PX4/homebrew-px4
     brew update
     brew install avr-gcc@7
+    brew link --force avr-gcc@7
     brew install dfu-programmer
     brew install dfu-util
     brew install gcc-arm-none-eabi
@@ -122,24 +129,27 @@ If you have trouble and want to ask for help, it is useful to generate a *Win_Ch
 
 ## Docker
 
-If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker](https://www.docker.com/products/docker), run the following command at the root of the QMK folder to build a keyboard/keymap:
-
+If this is a bit complex for you, Docker might be the turnkey solution you need. After installing [Docker CE](https://docs.docker.com/install/#supported-platforms), run the following command from the `qmk_firmware` directory to build a keyboard/keymap:
 ```bash
-# You'll run this every time you want to build a keymap
-# modify the keymap and keyboard assignment to compile what you want
-# defaults are ergodox/default
+util/docker_build.sh keyboard:keymap
+# For example: util/docker_build.sh ergodox_ez:steno
+```
+This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
 
-docker run -e keymap=gwen -e keyboard=ergodox_ez --rm -v $('pwd'):/qmk:rw edasque/qmk_firmware
+You can also start the script without any parameters, in which case it will ask you to input the build parameters one by one, which you may find easier to use:
+```bash
+util/docker_build.sh
+# Reads parameters as input (leave blank for defaults)
 ```
 
-On Windows Docker seems to have issues with the VOLUME tag in Dockerfile, and `$('pwd')` won't print a Windows compliant path; use full path instead, like this:
-
+There is also support for building _and_ flashing the keyboard straight from Docker by specifying the `target` as well:
 ```bash
-docker run -e keymap=default -e keyboard=ergodox_ez --rm -v D:/Users/Sacapuces/Documents/Repositories/qmk:/qmk:rw edasque/qmk_firmware
-
+util/docker_build.sh keyboard:keymap:target
+# For example: util/docker_build.sh planck/rev6:default:dfu-util
 ```
+If you're on Linux, this should work out of the box. On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use [QMK Toolbox](https://github.com/qmk/qmk_toolbox) instead.
 
-This will compile the targeted keyboard/keymap and leave it in your QMK directory for you to flash.
+!> Docker for Windows requires [Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v) to be enabled. This means that it cannot work on versions of Windows which don't have Hyper-V, such as Windows 7, Windows 8 and **Windows 10 Home**.
 
 ## Vagrant
 If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [vagrant guide](getting_started_vagrant.md).

docs/getting_started_make_guide.md

@@ -93,19 +93,17 @@ This enables MIDI sending and receiving with your keyboard. To enter MIDI send m
 
 `UNICODE_ENABLE`
 
-This allows you to send unicode symbols via `UC(<unicode>)` in your keymap. Only codes up to 0x7FFF are currently supported.
+This allows you to send Unicode characters using `UC(<code point>)` in your keymap. Code points up to `0x7FFF` are supported. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji.
 
 `UNICODEMAP_ENABLE`
 
-This allows sending unicode symbols using `X(<unicode>)` in your keymap. Codes
-up to 0xFFFFFFFF are supported, including emojis. You will need to maintain
-a separate mapping table in your keymap file.
+This allows you to send Unicode characters using `X(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported.
 
-Known limitations:
-- Under Mac OS, only codes up to 0xFFFF are supported.
-- Under Linux ibus, only codes up to 0xFFFFF are supported (but anything important is still under this limit for now).
+`UCIS_ENABLE`
 
-Characters out of range supported by the OS will be ignored.
+This allows you to send Unicode characters by inputting a mnemonic corresponding to the character you want to send. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported.
+
+For further details, as well as limitations, see the [Unicode page](feature_unicode.md).
 
 `BLUETOOTH_ENABLE`
 
@@ -117,7 +115,7 @@ This allows you output audio on the C6 pin (needs abstracting). See the [audio p
 
 `FAUXCLICKY_ENABLE`
 
-Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as AUDIO_ENABLE.
+Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as `AUDIO_ENABLE`.
 
 `VARIABLE_TRACE`
 
@@ -137,6 +135,18 @@ This enables [key lock](feature_key_lock.md). This consumes an additional 260 by
 
 This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 
+`SPLIT_TRANSPORT`
+
+As there is no standard split communication driver for ARM-based split keyboards yet, `SPLIT_TRANSPORT = custom` must be used for these. It will prevent the standard split keyboard communication code (which is AVR-specific) from being included, allowing a custom implementation to be used.
+
+`CUSTOM_MATRIX`
+
+Lets you replace the default matrix scanning routine with your own code. You will need to provide your own implementations of matrix_init() and matrix_scan().
+
+`CUSTOM_DEBOUNCE`
+
+Lets you replace the default key debouncing routine with your own code. You will need to provide your own implementation of debounce().
+
 ## Customizing Makefile Options on a Per-Keymap Basis
 
 If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.

docs/hardware_keyboard_guidelines.md

@@ -1,20 +1,104 @@
 # QMK Keyboard Guidelines
 
-We welcome all keyboard projects into QMK, but ask that you try to stick to a couple guidelines that help us keep things organised and consistent.
+Since starting, QMK has grown by leaps and bounds thanks to people like you who contribute to creating and maintaining our community keyboards. As we've grown we've discovered some patterns that work well, and ask that you conform to them to make it easier for other people to benefit from your hard work.
+
 
 ## Naming Your Keyboard/Project
 
-All names should be lowercase alphanumeric, and separated by an underscore (`_`), but not begin with one. Your directory and your `.h` and `.c` files should have exactly the same name. All folders should follow the same format. `test`, `keyboard`, and `all` are reserved by make and are not a valid name for a keyboard.
+All keyboard names are in lower case, consisting only of letters, numbers, and underscore (`_`). Names may not begin with an underscore. Forward slash (`/`) is used as a sub-folder separation character.
 
-## `readme.md`
+The names `test`, `keyboard`, and `all` are reserved for make commands and may not be used as a keyboard or subfolder name.
 
-All projects need to have a `readme.md` file that explains what the keyboard is, who made it, where it is available, and links to more information. Please follow the [published template](documentation_templates.md#keyboard-readmemd-template).
+Valid Examples:
+
+* `412_64`
+* `chimera_ortho`
+* `clueboard/66/rev3`
+* `planck`
+* `v60_type_r`
+
+## Sub-folders
+
+QMK uses sub-folders both for organization and to share code between revisions of the same keyboard. You can nest folders up to 4 levels deep:
+
+    qmk_firmware/keyboards/top_folder/sub_1/sub_2/sub_3/sub_4
+
+If a sub-folder has a `rules.mk` file it will be considered a compilable keyboard. It will be available in QMK Configurator and tested with `make all`. If you are using a folder to organize several keyboards from the same maker you should not have a `rules.mk` file.
+
+Example:
+
+Clueboard uses sub-folders for both purposes, organization and keyboard revisions.
+
+* [`qmk_firmware`](https://github.com/qmk/qmk_firmware/tree/master)
+  * [`keyboards`](https://github.com/qmk/qmk_firmware/tree/master/keyboards)
+    * [`clueboard`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard)  ← This is the organization folder, there's no `rules.mk` file
+      * [`60`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/60)  ← This is a compilable keyboard, it has a `rules.mk` file
+      * [`66`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66) ← This is also compilable- it uses `DEFAULT_FOLDER` to specify `rev3` as the default revision
+        * [`rev1`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev1) ← compilable: `make clueboard/66/rev1`
+        * [`rev2`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev2) ← compilable: `make clueboard/66/rev2`
+        * [`rev3`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev3) ← compilable: `make clueboard/66/rev3` or `make clueboard/66`
+
+## Keyboard Folder Structure
+
+Your keyboard should be located in `qmk_firmware/keyboards/` and the folder name should be your keyboard's name as described in the previous section. Inside this folder should be several files:
+
+* `readme.md`
+* `info.json`
+* `config.h`
+* `rules.mk`
+* `<keyboard_name>.c`
+* `<keyboard_name>.h`
+
+### `readme.md`
+
+All projects need to have a `readme.md` file that explains what the keyboard is, who made it and where it's available. If applicable, it should also contain links to more information, such as the maker's website. Please follow the [published template](documentation_templates.md#keyboard-readmemd-template).
+
+### `info.json`
+
+This file is used by the [QMK API](https://github.com/qmk/qmk_api). It contains the information [QMK Configurator](https://config.qmk.fm/) needs to display a representation of your keyboard. You can also set metadata here. For more information see the [reference page](reference_info_json.md).
+
+### `config.h`
+
+All projects need to have a `config.h` file that sets things like the matrix size, product name, USB VID/PID, description and other settings. In general, use this file to set essential information and defaults for your keyboard that will always work.
+
+### `rules.mk`
+
+The presence of this file means that the folder is a keyboard target and can be used in `make` commands. This is where you setup the build environment for your keyboard and configure the default set of features.
+
+### `<keyboard_name.c>`
+
+This is where you will write custom code for your keyboard. Typically you will write code to initialize and interface with the hardware in your keyboard. If your keyboard consists of only a key matrix with no LEDs, speakers, or other auxillary hardware this file can be blank.
+
+The following functions are typically defined in this file:
+
+* `void matrix_init_kb(void)`
+* `void matrix_scan_kb(void)`
+* `bool process_record_kb(uint16_t keycode, keyrecord_t *record)`
+* `void led_set_kb(uint8_t usb_led)`
+
+### `<keyboard_name.h>`
+
+This file is used to define the matrix for your keyboard. You should define at least one C macro which translates an array into a matrix representing the physical switch matrix for your keyboard. If it's possible to build your keyboard with multiple layouts you should define additional macros.
+
+If you have only a single layout you should call this macro `LAYOUT`.
+
+When defining multiple layouts you should have a base layout, named `LAYOUT_all`, that supports all possible switch positions on your matrix, even if that layout is impossible to build physically. This is the macro you should use in your `default` keymap. You should then have additional keymaps named `default_<layout>` that use your other layout macros. This will make it easier for people to use the layouts you define.
+
+Layout macro names are entirely lowercase, except for the word `LAYOUT` at the front.
+
+As an example, if you have a 60% PCB that supports ANSI and ISO you might define the following layouts and keymaps:
+
+| Layout Name | Keymap Name | Description |
+|-------------|-------------|-------------|
+| LAYOUT_all | default | A layout that supports both ISO and ANSI |
+| LAYOUT_ansi | default_ansi | An ANSI layout |
+| LAYOUT_iso | default_iso | An ISO layout |
 
 ## Image/Hardware Files
 
-In an effort to keep the repo size down, we're no longer accepting images of any format in the repo, with few exceptions. Hosting them elsewhere (imgur) and linking them in the `readme.md` is the preferred method.
+In an effort to keep the repo size down we're no longer accepting binary files of any format, with few exceptions. Hosting them elsewhere (such as <https://imgur.com>) and linking them in the `readme.md` is preferred.
 
-Any sort of hardware file (plate, case, pcb) can't be stored in qmk_firmware, but we have the [qmk.fm repo](https://github.com/qmk/qmk.fm) where such files (as well as in-depth info) can be stored and viewed on [qmk.fm](http://qmk.fm). Downloadable files are stored in `/<keyboard>/` (name follows the same format as above) which are served at `http://qmk.fm/<keyboard>/`, and pages are generated from `/_pages/<keyboard>/` which are served at the same location (.md files are generated into .html files through Jekyll). Check out the `lets_split` directory for an example.
+Hardware files (such as plates, cases, pcb) can be contributed to the [qmk.fm repo](https://github.com/qmk/qmk.fm) and they will be made available on [qmk.fm](http://qmk.fm). Downloadable files are stored in `/<keyboard>/` (name follows the same format as above) which are served at `http://qmk.fm/<keyboard>/`, and pages are generated from `/_pages/<keyboard>/` which are served at the same location (.md files are generated into .html files through Jekyll). Check out the `lets_split` folder for an example.
 
 ## Keyboard Defaults
 
@@ -32,77 +116,6 @@ If your keyboard does not have 2 shift keys you should provide a working default
 
 As documented on [Customizing Functionality](custom_quantum_functions.md) you can define custom functions for your keyboard. Please keep in mind that your users may want to customize that behavior as well, and make it possible for them to do that. If you are providing a custom function, for example `process_record_kb()`, make sure that your function calls the `_user()` version of the call too. You should also take into account the return value of the `_user()` version, and only run your custom code if the user returns `true`.
 
-## Keyboard Metadata
-
-As QMK grows so does the ecosystem surrounding QMK. To make it easier for projects in that ecosystem to tie into QMK as we make changes we are developing a metadata system to expose information about keyboards in QMK.
-
-You can create `info.json` files at every level under `qmk_firmware/keyboards/<name>` to specify this metadata. These files are combined, with more specific files overriding keys in less specific files. This means you do not need to duplicate your metadata information. For example, `qmk_firmware/keyboards/clueboard/info.json` specifies `manufacturer` and `maintainer`, while `qmk_firmware/keyboards/clueboard/66/info.json` specifies more specific information about Clueboard 66%.
-
-### `info.json` Format
-
-The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
-
-* `keyboard_name`
-  * A free-form text string describing the keyboard.
-  * Example: `Clueboard 66%`
-* `url`
-  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
-* `maintainer`
-  * GitHub username of the maintainer, or `qmk` for community maintained boards
-* `width`
-  * Width of the board in Key Units
-* `height`
-  * Height of the board in Key Units
-* `layouts`
-  * Physical Layout representations. See the next section for more detail.
-
-#### Layout Format
-
-Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
-
-* `width`
-  * Optional: The width of the layout in Key Units
-* `height`
-  * Optional: The height of the layout in Key Units
-* `key_count`
-  * **Required**: The number of keys in this layout
-* `layout`
-  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
-
-#### Key Dictionary Format
-
-Each Key Dictionary in a layout describes the physical properties of a key. If you are familiar with the Raw Code for <http://keyboard-layout-editor.com> you will find many of the concepts the same. We re-use the same key names and layout choices wherever possible, but unlike keyboard-layout-editor each key is stateless, inheriting no properties from the keys that came before it.
-
-All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
-
-* `X`
-  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
-* `Y`
-  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
-* `W`
-  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
-* `H`
-  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
-* `R`
-  * How many degrees clockwise to rotate the key.
-* `RX`
-  * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x`
-* `RY`
-  * The absolute position of the point to rotate the key around in the vertical axis. Default: `y`
-* `KS`
-  * Key Shape: define a polygon by providing a list of points, in Key Units.
-  * **Important**: These are relative to the top-left of the key, not absolute.
-  * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]`
-
-### How is the Metadata Exposed?
-
-This metadata is primarily used in two ways:
-
-* To allow web-based configurators to dynamically generate UI
-* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter.
-
-Configurator authors can see the [QMK Compiler](https://docs.compile.qmk.fm/api_docs.html) docs for more information on using the JSON API.
-
 ## Non-Production/Handwired Projects
 
 We're happy to accept any project that uses QMK, including prototypes and handwired ones, but we have a separate `/keyboards/handwired/` folder for them, so the main `/keyboards/` folder doesn't get overcrowded. If a prototype project becomes a production project at some point in the future, we'd be happy to move it to the main `/keyboards/` folder!

docs/i2c_driver.md

@@ -0,0 +1,86 @@
+# I2C Master Driver
+
+The I2C Master drivers used in QMK have a set of common functions to allow portability between MCUs.
+
+## Available functions
+
+|Function                                                                                                          |Description                                                                                                                                                                  |
+|------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`void i2c_init(void);`                                                                                            |Initializes the I2C driver. This function should be called once before any transaction is initiated.                                                                         |
+|`uint8_t i2c_start(uint8_t address);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
+|`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
+|`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
+|`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
+|`uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
+|`uint8_t i2c_stop(uint16_t timeout);`                                                                             |Stops the I2C driver.                                                                                                                                                        |
+
+### Function Return
+
+All the above functions, except `void i2c_init(void);` return the following truth table:
+
+|Return Value   |Description                                        |
+|---------------|---------------------------------------------------|
+|0              |Operation executed successfully.                   |
+|-1             |Operation failed.                                  |
+|-2             |Operation timed out.                               |
+
+
+## AVR
+
+### Configuration
+
+The following defines can be used to configure the I2C master driver.
+
+|Variable          |Description                                        |Default|
+|------------------|---------------------------------------------------|-------|
+|`F_SCL`           |Clock frequency in Hz                              |400KHz |
+|`Prescaler`       |Divides master clock to aid in I2C clock selection |1      |
+
+AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required.
+
+## ARM
+
+For ARM the Chibios I2C HAL driver is under the hood.
+This section assumes an STM32 MCU.
+
+### Configuration
+
+The configuration for ARM MCUs can be quite complex as often there are multiple I2C drivers which can be assigned to a variety of ports.
+
+Firstly the `mcuconf.h` file must be setup to enable the necessary hardware drivers.
+
+|Variable                      |Description                                                                        |Default|
+|------------------------------|------------------------------------------------------------------------------------|-------|
+|`#STM32_I2C_USE_XXX`          |Enable/Disable the hardware driver XXX (each driver should be explicitly listed)    |FALSE  |
+|`#STM32_I2C_BUSY_TIMEOUT`     |Time in ms until the I2C command is aborted if no response is received              |50     |
+|`#STM32_I2C_XXX_IRQ_PRIORITY` |Interrupt priority for hardware driver XXX (THIS IS AN EXPERT SETTING)              |10     |
+|`#STM32_I2C_USE_DMA`          |Enable/Disable the ability of the MCU to offload the data transfer to the DMA unit  |TRUE   |
+|`#STM32_I2C_XXX_DMA_PRIORITY` |Priority of DMA unit for hardware driver XXX (THIS IS AN EXPERT SETTING)            |1      |
+
+Secondly, in the `halconf.h` file, `#define HAL_USE_I2C` must be set to `TRUE`. This allows ChibiOS to load its I2C driver.
+
+Lastly, we need to assign the correct GPIO pins depending on the I2C hardware driver we want to use.
+
+By default the I2C1 hardware driver is assumed to be used. If another hardware driver is used,  `#define I2C_DRIVER I2CDX` should be added to the `config.h` file with X being the number of hardware driver used. For example is I2C3 is enabled, the `config.h` file should contain `#define I2C_DRIVER I2CD3`. This aligns the QMK I2C driver with the Chibios I2C driver.
+
+STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C. You can use these defines to set your i2c pins:
+
+| Variable    | Description                                  | Default |
+|-------------|----------------------------------------------|---------|
+| `I2C1_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) | `GPIOB` |
+| `I2C1_SCL`  | The pin number for the SCL pin (0-9)         | `6`     |
+| `I2C1_SDA`  | The pin number for the SDA pin (0-9)         | `7`     |
+
+You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
+
+```C
+void i2c_init(void)
+{
+  setPinInput(B6); // Try releasing special pins for a short time
+  setPinInput(B7);
+  wait_ms(10); // Wait for the release to happen
+
+  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function
+  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function
+}
+```

docs/index.html

@@ -17,7 +17,7 @@
       name: 'QMK Firmware',
       nameLink: 'https://qmk.fm/',
       repo: 'qmk/qmk_firmware',
-      loadSidebar: true,
+      loadSidebar: '_summary.md',
       auto2top: true,
       formatUpdated: '{YYYY}/{MM}/{DD} {HH}:{mm}',
       search: {
@@ -25,7 +25,8 @@
         placeholder: 'Search Documentation...',
         noData: 'We could not find any documents matching your search.',
         depth: 6
-      }
+      },
+      fallbackLanguages: ['zh']
     }
   </script>
   <script src="//unpkg.com/docsify/lib/docsify.min.js"></script>

docs/internals_gpio_control.md

@@ -1,6 +1,6 @@
 # GPIO Control
 
-QMK has a GPIO control abstraction layer which is micro-controller agnostic. This is done to allow easy access to pin control across different platforms.
+QMK has a GPIO control abstraction layer which is microcontroller agnostic. This is done to allow easy access to pin control across different platforms.
 
 ## Functions
 
@@ -12,12 +12,12 @@ The following functions can provide basic control of GPIOs and are found in `qua
 |`setPinInputHigh(pin)`|Set pin as input with build in pull-up                            |
 |`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)|
 |`setPinOutput(pin)`   |Set pin as output                                                 |
-|`writePinHige(pin)`   |Set pin level as high, assuming it is an output                   |
+|`writePinHigh(pin)`   |Set pin level as high, assuming it is an output                   |
 |`writePinLow(pin)`    |Set pin level as low, assuming it is an output                    |
 |`writePin(pin, level)`|Set pin level, assuming it is an output                           |
 |`readPin(pin)`        |Returns the level of the pin                                      |
 
-## Advance settings
+## Advanced Settings
 
-Each micro-controller can have multiple advance settings regarding its GPIO. This abstraction layer does not limit the use of architecture specific functions. Advance users should consult the datasheet of there desired device and include any needed libraries. For AVR the standard avr/io.h library is used and for STM32 the Chibios [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
+Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
 

docs/isp_flashing_guide.md

@@ -53,7 +53,7 @@ This is pretty straight-forward - we'll be connecting like-things to like-things
 The only difference between the .hex files below is which pin is connected to RESET. You can use them on other boards as well, as long as you're aware of the pins being used. If for some reason neither of these pins are available, [create an issue](https://github.com/qmk/qmk_firmware/issues/new), and we can generate one for you!
 
 * Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`)
-* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_mico_ISP_B6_10.hex) (`B6/10`)
+* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_micro_ISP_B6_10.hex) (`B6/10`)
 
 **Flash your Teenys/Pro Micro with one of these and continue - you won't need the file after flashing your ISP device.**
 

docs/keycode.txt

@@ -1,261 +0,0 @@
-Keycode Symbol Table
-====================
-Keycodes are defined in `common/keycode.h`.
-Range of 00-A4 and E0-E7 are identical with HID Usage:
-<http://www.usb.org/developers/hidpage/Hut1_12v2.pdf>
-Virtual keycodes are defined out of above range to support special actions.
-
-
-Keycode Symbol      Short name      Description
---------------------------------------------------------------------------------
-KC_NO                               00 Reserved (no event indicated)
-KC_ROLL_OVER                        01 Keyboard ErrorRollOver
-KC_POST_FAIL                        02 Keyboard POSTFail
-KC_UNDEFINED                        03 Keyboard ErrorUndefined
-KC_A                                04 Keyboard a and A
-KC_B                                05 Keyboard b and B
-KC_C                                06 Keyboard c and C
-KC_D                                07 Keyboard d and D
-KC_E                                08 Keyboard e and E
-KC_F                                09 Keyboard f and F
-KC_G                                0A Keyboard g and G
-KC_H                                0B Keyboard h and H
-KC_I                                0C Keyboard i and I
-KC_J                                0D Keyboard j and J
-KC_K                                0E Keyboard k and K
-KC_L                                0F Keyboard l and L
-KC_M                                10 Keyboard m and M
-KC_N                                11 Keyboard n and N
-KC_O                                12 Keyboard o and O
-KC_P                                13 Keyboard p and P
-KC_Q                                14 Keyboard q and Q
-KC_R                                15 Keyboard r and R
-KC_S                                16 Keyboard s and S
-KC_T                                17 Keyboard t and T
-KC_U                                18 Keyboard u and U
-KC_V                                19 Keyboard v and V
-KC_W                                1A Keyboard w and W
-KC_X                                1B Keyboard x and X
-KC_Y                                1C Keyboard y and Y
-KC_Z                                1D Keyboard z and Z
-KC_1                                1E Keyboard 1 and !
-KC_2                                1F Keyboard 2 and @
-KC_3                                20 Keyboard 3 and #
-KC_4                                21 Keyboard 4 and $
-KC_5                                22 Keyboard 5 and %
-KC_6                                23 Keyboard 6 and ^
-KC_7                                24 Keyboard 7 and &
-KC_8                                25 Keyboard 8 and *
-KC_9                                26 Keyboard 9 and (
-KC_0                                27 Keyboard 0 and )
-KC_ENTER            KC_ENT          28 Keyboard Return (ENTER)
-KC_ESCAPE           KC_ESC          29 Keyboard ESCAPE
-KC_BSPACE           KC_BSPC         2A Keyboard DELETE (Backspace)
-KC_TAB                              2B Keyboard Tab
-KC_SPACE            KC_SPC          2C Keyboard Spacebar
-KC_MINUS            KC_MINS         2D Keyboard - and (underscore)
-KC_EQUAL            KC_EQL          2E Keyboard = and +
-KC_LBRACKET         KC_LBRC         2F Keyboard [ and {
-KC_RBRACKET         KC_RBRC         30 Keyboard ] and }
-KC_BSLASH           KC_BSLS         31 Keyboard \ and |
-KC_NONUS_HASH       KC_NUHS         32 Keyboard Non-US # and ~
-KC_SCOLON           KC_SCLN         33 Keyboard ; and :
-KC_QUOTE            KC_QUOT         34 Keyboard ‘ and “
-KC_GRAVE            KC_GRV          35 Keyboard Grave Accent and Tilde
-KC_COMMA            KC_COMM         36 Keyboard , and <
-KC_DOT                              37 Keyboard . and >
-KC_SLASH            KC_SLSH         38 Keyboard / and ?
-KC_CAPSLOCK         KC_CAPS         39 Keyboard Caps Lock
-KC_F1                               3A Keyboard F1
-KC_F2                               3B Keyboard F2
-KC_F3                               3C Keyboard F3
-KC_F4                               3D Keyboard F4
-KC_F5                               3E Keyboard F5
-KC_F6                               3F Keyboard F6
-KC_F7                               40 Keyboard F7
-KC_F8                               41 Keyboard F8
-KC_F9                               42 Keyboard F9
-KC_F10                              43 Keyboard F10
-KC_F11                              44 Keyboard F11
-KC_F12                              45 Keyboard F12
-KC_PSCREEN          KC_PSCR         46 Keyboard PrintScreen
-KC_SCROLLLOCK       KC_SLCK         47 Keyboard Scroll Lock
-KC_PAUSE            KC_PAUS         48 Keyboard Pause
-KC_INSERT           KC_INS          49 Keyboard Insert
-KC_HOME                             4A Keyboard Home
-KC_PGUP                             4B Keyboard PageUp
-KC_DELETE           KC_DEL          4C Keyboard Delete Forward
-KC_END                              4D Keyboard End
-KC_PGDOWN           KC_PGDN         4E Keyboard PageDown
-KC_RIGHT            KC_RGHT         4F Keyboard RightArrow
-KC_LEFT                             50 Keyboard LeftArrow
-KC_DOWN                             51 Keyboard DownArrow
-KC_UP                               52 Keyboard UpArrow
-KC_NUMLOCK          KC_NLCK         53 Keypad Num Lock and Clear
-KC_KP_SLASH         KC_PSLS         54 Keypad /
-KC_KP_ASTERISK      KC_PAST         55 Keypad *
-KC_KP_MINUS         KC_PMNS         56 Keypad -
-KC_KP_PLUS          KC_PPLS         57 Keypad +
-KC_KP_ENTER         KC_PENT         58 Keypad ENTER
-KC_KP_1             KC_P1           59 Keypad 1 and End
-KC_KP_2             KC_P2           5A Keypad 2 and Down Arrow
-KC_KP_3             KC_P3           5B Keypad 3 and PageDn
-KC_KP_4             KC_P4           5C Keypad 4 and Left Arrow
-KC_KP_5             KC_P5           5D Keypad 5
-KC_KP_6             KC_P6           5E Keypad 6 and Right Arrow
-KC_KP_7             KC_P7           5F Keypad 7 and Home
-KC_KP_8             KC_P8           60 Keypad 8 and Up Arrow
-KC_KP_9             KC_P9           61 Keypad 9 and PageUp
-KC_KP_0             KC_P0           62 Keypad 0 and Insert
-KC_KP_DOT           KC_PDOT         63 Keypad . and Delete
-KC_NONUS_BSLASH     KC_NUBS         64 Keyboard Non-US \ and |
-KC_APPLICATION      KC_APP          65 Keyboard Application
-KC_POWER                            66 Keyboard Power
-KC_KP_EQUAL         KC_PEQL         67 Keypad =
-KC_F13                              68 Keyboard F13
-KC_F14                              69 Keyboard F14
-KC_F15                              6A Keyboard F15
-KC_F16                              6B Keyboard F16
-KC_F17                              6C Keyboard F17
-KC_F18                              6D Keyboard F18
-KC_F19                              6E Keyboard F19
-KC_F20                              6F Keyboard F20
-KC_F21                              70 Keyboard F21
-KC_F22                              71 Keyboard F22
-KC_F23                              72 Keyboard F23
-KC_F24                              73 Keyboard F24
-KC_EXECUTE                          74 Keyboard Execute
-KC_HELP                             75 Keyboard Help
-KC_MENU                             76 Keyboard Menu
-KC_SELECT                           77 Keyboard Select
-KC_STOP                             78 Keyboard Stop
-KC_AGAIN                            79 Keyboard Again
-KC_UNDO                             7A Keyboard Undo
-KC_CUT                              7B Keyboard Cut
-KC_COPY                             7C Keyboard Copy
-KC_PASTE                            7D Keyboard Paste
-KC_FIND                             7E Keyboard Find
-KC__MUTE                            7F Keyboard Mute
-KC__VOLUP                           80 Keyboard Volume Up
-KC__VOLDOWN                         81 Keyboard Volume Down
-KC_LOCKING_CAPS                     82 Keyboard Locking Caps Lock
-KC_LOCKING_NUM                      83 Keyboard Locking Num Lock
-KC_LOCKING_SCROLL                   84 Keyboard Locking Scroll Lock
-KC_KP_COMMA         KC_PCMM         85 Keypad Comma
-KC_KP_EQUAL_AS400                   86 Keypad Equal Sign
-KC_INT1             KC_RO           87 Keyboard International115
-KC_INT2             KC_KANA         88 Keyboard International216
-KC_INT3             KC_JYEN         89 Keyboard International317
-KC_INT4             KC_HENK         8A Keyboard International418
-KC_INT5             KC_MHEN         8B Keyboard International519
-KC_INT6                             8C Keyboard International620
-KC_INT7                             8D Keyboard International721
-KC_INT8                             8E Keyboard International822
-KC_INT9                             8F Keyboard International922
-KC_LANG1                            90 Keyboard LANG125
-KC_LANG2                            91 Keyboard LANG226
-KC_LANG3                            92 Keyboard LANG330
-KC_LANG4                            93 Keyboard LANG431
-KC_LANG5                            94 Keyboard LANG532
-KC_LANG6                            95 Keyboard LANG68
-KC_LANG7                            96 Keyboard LANG78
-KC_LANG8                            97 Keyboard LANG88
-KC_LANG9                            98 Keyboard LANG98
-KC_ALT_ERASE                        99 Keyboard Alternate Erase
-KC_SYSREQ                           9A Keyboard SysReq/Attention
-KC_CANCEL                           9B Keyboard Cancel
-KC_CLEAR                            9C Keyboard Clear
-KC_PRIOR                            9D Keyboard Prior
-KC_RETURN                           9E Keyboard Return
-KC_SEPARATOR                        9F Keyboard Separator
-KC_OUT                              A0 Keyboard Out
-KC_OPER                             A1 Keyboard Oper
-KC_CLEAR_AGAIN                      A2 Keyboard Clear/Again
-KC_CRSEL                            A3 Keyboard CrSel/Props
-KC_EXSEL                            A4 Keyboard ExSel
-/* Modifiers */
-KC_LCTRL            KC_LCTL         E0 Keyboard LeftControl
-KC_LSHIFT           KC_LSFT         E1 Keyboard LeftShift
-KC_LALT                             E2 Keyboard LeftAlt
-KC_LGUI                             E3 Keyboard Left GUI(Windows/Apple/Meta key)
-KC_RCTRL            KC_RCTL         E4 Keyboard RightControl
-KC_RSHIFT           KC_RSFT         E5 Keyboard RightShift
-KC_RALT                             E6 Keyboard RightAlt
-KC_RGUI                             E7 Keyboard Right GUI(Windows/Apple/Meta key)
-
-/*
- * Virtual keycodes
- */
-/* System Control */
-KC_SYSTEM_POWER     KC_PWR          System Power Down
-KC_SYSTEM_SLEEP     KC_SLEP         System Sleep
-KC_SYSTEM_WAKE      KC_WAKE         System Wake
-/* Consumer Page */
-KC_AUDIO_MUTE       KC_MUTE
-KC_AUDIO_VOL_UP     KC_VOLU
-KC_AUDIO_VOL_DOWN   KC_VOLD
-KC_MEDIA_NEXT_TRACK KC_MNXT
-KC_MEDIA_PREV_TRACK KC_MPRV
-KC_MEDIA_STOP       KC_MSTP
-KC_MEDIA_PLAY_PAUSE KC_MPLY
-KC_MEDIA_SELECT     KC_MSEL
-KC_MAIL             KC_MAIL
-KC_CALCULATOR       KC_CALC
-KC_MY_COMPUTER      KC_MYCM
-KC_WWW_SEARCH       KC_WSCH
-KC_WWW_HOME         KC_WHOM
-KC_WWW_BACK         KC_WBAK
-KC_WWW_FORWARD      KC_WFWD
-KC_WWW_STOP         KC_WSTP
-KC_WWW_REFRESH      KC_WREF
-KC_WWW_FAVORITES    KC_WFAV
-/* Mousekey */
-KC_MS_UP            KC_MS_U         Mouse Cursor Up
-KC_MS_DOWN          KC_MS_D         Mouse Cursor Down
-KC_MS_LEFT          KC_MS_L         Mouse Cursor Left
-KC_MS_RIGHT         KC_MS_R         Mouse Cursor Right
-KC_MS_BTN1          KC_BTN1         Mouse Button 1
-KC_MS_BTN2          KC_BTN2         Mouse Button 2
-KC_MS_BTN3          KC_BTN3         Mouse Button 3
-KC_MS_BTN4          KC_BTN4         Mouse Button 4
-KC_MS_BTN5          KC_BTN5         Mouse Button 5
-KC_MS_WH_UP         KC_WH_U         Mouse Wheel Up
-KC_MS_WH_DOWN       KC_WH_D         Mouse Wheel Down
-KC_MS_WH_LEFT       KC_WH_L         Mouse Wheel Left
-KC_MS_WH_RIGHT      KC_WH_R         Mouse Wheel Right
-KC_MS_ACCEL0        KC_ACL0         Mouse Acceleration 0
-KC_MS_ACCEL1        KC_ACL1         Mouse Acceleration 1
-KC_MS_ACCEL2        KC_ACL2         Mouse Acceleration 2
-/* Fn key */
-KC_FN0
-KC_FN1
-KC_FN2
-KC_FN3
-KC_FN4
-KC_FN5
-KC_FN6
-KC_FN7
-KC_FN8
-KC_FN9
-KC_FN10
-KC_FN11
-KC_FN12
-KC_FN13
-KC_FN14
-KC_FN15
-KC_FN16
-KC_FN17
-KC_FN18
-KC_FN19
-KC_FN20
-KC_FN21
-KC_FN22
-KC_FN23
-KC_FN24
-KC_FN25
-KC_FN26
-KC_FN27
-KC_FN28
-KC_FN29
-KC_FN30
-KC_FN31

docs/keycodes.md

@@ -6,226 +6,229 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Basic Keycodes](keycodes_basic.md)
 
-|Key                    |Aliases             |Description                                    |
-|-----------------------|--------------------|-----------------------------------------------|
-|`KC_NO`                |`XXXXXXX`           |Ignore this key (NOOP)                         |
-|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`|Use the next lowest non-transparent key        |
-|`KC_A`                 |                    |`a` and `A`                                    |
-|`KC_B`                 |                    |`b` and `B`                                    |
-|`KC_C`                 |                    |`c` and `C`                                    |
-|`KC_D`                 |                    |`d` and `D`                                    |
-|`KC_E`                 |                    |`e` and `E`                                    |
-|`KC_F`                 |                    |`f` and `F`                                    |
-|`KC_G`                 |                    |`g` and `G`                                    |
-|`KC_H`                 |                    |`h` and `H`                                    |
-|`KC_I`                 |                    |`i` and `I`                                    |
-|`KC_J`                 |                    |`j` and `J`                                    |
-|`KC_K`                 |                    |`k` and `K`                                    |
-|`KC_L`                 |                    |`l` and `L`                                    |
-|`KC_M`                 |                    |`m` and `M`                                    |
-|`KC_N`                 |                    |`n` and `N`                                    |
-|`KC_O`                 |                    |`o` and `O`                                    |
-|`KC_P`                 |                    |`p` and `P`                                    |
-|`KC_Q`                 |                    |`q` and `Q`                                    |
-|`KC_R`                 |                    |`r` and `R`                                    |
-|`KC_S`                 |                    |`s` and `S`                                    |
-|`KC_T`                 |                    |`t` and `T`                                    |
-|`KC_U`                 |                    |`u` and `U`                                    |
-|`KC_V`                 |                    |`v` and `V`                                    |
-|`KC_W`                 |                    |`w` and `W`                                    |
-|`KC_X`                 |                    |`x` and `X`                                    |
-|`KC_Y`                 |                    |`y` and `Y`                                    |
-|`KC_Z`                 |                    |`z` and `Z`                                    |
-|`KC_1`                 |                    |`1` and `!`                                    |
-|`KC_2`                 |                    |`2` and `@`                                    |
-|`KC_3`                 |                    |`3` and `#`                                    |
-|`KC_4`                 |                    |`4` and `$`                                    |
-|`KC_5`                 |                    |`5` and `%`                                    |
-|`KC_6`                 |                    |`6` and `^`                                    |
-|`KC_7`                 |                    |`7` and `&`                                    |
-|`KC_8`                 |                    |`8` and `*`                                    |
-|`KC_9`                 |                    |`9` and `(`                                    |
-|`KC_0`                 |                    |`0` and `)`                                    |
-|`KC_ENTER`             |`KC_ENT`            |Return (Enter)                                 |
-|`KC_ESCAPE`            |`KC_ESC`            |Escape                                         |
-|`KC_BSPACE`            |`KC_BSPC`           |Delete (Backspace)                             |
-|`KC_TAB`               |                    |Tab                                            |
-|`KC_SPACE`             |`KC_SPC`            |Spacebar                                       |
-|`KC_MINUS`             |`KC_MINS`           |`-` and `_`                                    |
-|`KC_EQUAL`             |`KC_EQL`            |`=` and `+`                                    |
-|`KC_LBRACKET`          |`KC_LBRC`           |`[` and `{`                                    |
-|`KC_RBRACKET`          |`KC_RBRC`           |`]` and `}`                                    |
-|`KC_BSLASH`            |`KC_BSLS`           |`\` and <code>&#124;</code>                    |
-|`KC_NONUS_HASH`        |`KC_NUHS`           |Non-US `#` and `~`                             |
-|`KC_SCOLON`            |`KC_SCLN`           |`;` and `:`                                    |
-|`KC_QUOTE`             |`KC_QUOT`           |`'` and `"`                                    |
-|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK` |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
-|`KC_COMMA`             |`KC_COMM`           |`,` and `<`                                    |
-|`KC_DOT`               |                    |`.` and `>`                                    |
-|`KC_SLASH`             |`KC_SLSH`           |`/` and `?`                                    |
-|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`|Caps Lock                                      |
-|`KC_F1`                |                    |F1                                             |
-|`KC_F2`                |                    |F2                                             |
-|`KC_F3`                |                    |F3                                             |
-|`KC_F4`                |                    |F4                                             |
-|`KC_F5`                |                    |F5                                             |
-|`KC_F6`                |                    |F6                                             |
-|`KC_F7`                |                    |F7                                             |
-|`KC_F8`                |                    |F8                                             |
-|`KC_F9`                |                    |F9                                             |
-|`KC_F10`               |                    |F10                                            |
-|`KC_F11`               |                    |F11                                            |
-|`KC_F12`               |                    |F12                                            |
-|`KC_PSCREEN`           |`KC_PSCR`           |Print Screen                                   |
-|`KC_SCROLLLOCK`        |`KC_SLCK`           |Scroll Lock                                    |
-|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK` |Pause                                          |
-|`KC_INSERT`            |`KC_INS`            |Insert                                         |
-|`KC_HOME`              |                    |Home                                           |
-|`KC_PGUP`              |                    |Page Up                                        |
-|`KC_DELETE`            |`KC_DEL`            |Forward Delete                                 |
-|`KC_END`               |                    |End                                            |
-|`KC_PGDOWN`            |`KC_PGDN`           |Page Down                                      |
-|`KC_RIGHT`             |`KC_RGHT`           |Right Arrow                                    |
-|`KC_LEFT`              |                    |Left Arrow                                     |
-|`KC_DOWN`              |                    |Down Arrow                                     |
-|`KC_UP`                |                    |Up Arrow                                       |
-|`KC_NUMLOCK`           |`KC_NLCK`           |Keypad Num Lock and Clear                      |
-|`KC_KP_SLASH`          |`KC_PSLS`           |Keypad `/`                                     |
-|`KC_KP_ASTERISK`       |`KC_PAST`           |Keypad `*`                                     |
-|`KC_KP_MINUS`          |`KC_PMNS`           |Keypad `-`                                     |
-|`KC_KP_PLUS`           |`KC_PPLS`           |Keypad `+`                                     |
-|`KC_KP_ENTER`          |`KC_PENT`           |Keypad Enter                                   |
-|`KC_KP_1`              |`KC_P1`             |Keypad `1` and End                             |
-|`KC_KP_2`              |`KC_P2`             |Keypad `2` and Down Arrow                      |
-|`KC_KP_3`              |`KC_P3`             |Keypad `3` and Page Down                       |
-|`KC_KP_4`              |`KC_P4`             |Keypad `4` and Left Arrow                      |
-|`KC_KP_5`              |`KC_P5`             |Keypad `5`                                     |
-|`KC_KP_6`              |`KC_P6`             |Keypad `6` and Right Arrow                     |
-|`KC_KP_7`              |`KC_P7`             |Keypad `7` and Home                            |
-|`KC_KP_8`              |`KC_P8`             |Keypad `8` and Up Arrow                        |
-|`KC_KP_9`              |`KC_P9`             |Keypad `9` and Page Up                         |
-|`KC_KP_0`              |`KC_P0`             |Keypad `0` and Insert                          |
-|`KC_KP_DOT`            |`KC_PDOT`           |Keypad `.` and Delete                          |
-|`KC_NONUS_BSLASH`      |`KC_NUBS`           |Non-US `\` and <code>&#124;</code>             |
-|`KC_APPLICATION`       |`KC_APP`            |Application (Windows Menu Key)                 |
-|`KC_POWER`             |                    |System Power (macOS)                           |
-|`KC_KP_EQUAL`          |`KC_PEQL`           |Keypad `=`                                     |
-|`KC_F13`               |                    |F13                                            |
-|`KC_F14`               |                    |F14                                            |
-|`KC_F15`               |                    |F15                                            |
-|`KC_F16`               |                    |F16                                            |
-|`KC_F17`               |                    |F17                                            |
-|`KC_F18`               |                    |F18                                            |
-|`KC_F19`               |                    |F19                                            |
-|`KC_F20`               |                    |F20                                            |
-|`KC_F21`               |                    |F21                                            |
-|`KC_F22`               |                    |F22                                            |
-|`KC_F23`               |                    |F23                                            |
-|`KC_F24`               |                    |F24                                            |
-|`KC_EXECUTE`           |`KC_EXEC`           |Execute                                        |
-|`KC_HELP`              |                    |Help                                           |
-|`KC_MENU`              |                    |Menu                                           |
-|`KC_SELECT`            |`KC_SLCT`           |Select                                         |
-|`KC_STOP`              |                    |Stop                                           |
-|`KC_AGAIN`             |`KC_AGIN`           |Again                                          |
-|`KC_UNDO`              |                    |Undo                                           |
-|`KC_CUT`               |                    |Cut                                            |
-|`KC_COPY`              |                    |Copy                                           |
-|`KC_PASTE`             |`KC_PSTE`           |Paste                                          |
-|`KC_FIND`              |                    |Find                                           |
-|`KC__MUTE`             |                    |Mute (macOS)                                   |
-|`KC__VOLUP`            |                    |Volume Up (macOS)                              |
-|`KC__VOLDOWN`          |                    |Volume Down (macOS)                            |
-|`KC_LOCKING_CAPS`      |`KC_LCAP`           |Locking Caps Lock                              |
-|`KC_LOCKING_NUM`       |`KC_LNUM`           |Locking Num Lock                               |
-|`KC_LOCKING_SCROLL`    |`KC_LSCR`           |Locking Scroll Lock                            |
-|`KC_KP_COMMA`          |`KC_PCMM`           |Keypad `,`                                     |
-|`KC_KP_EQUAL_AS400`    |                    |Keypad `=` on AS/400 keyboards                 |
-|`KC_INT1`              |`KC_RO`             |JIS `\` and <code>&#124;</code>                |
-|`KC_INT2`              |`KC_KANA`           |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`           |JIS `¥`                                        |
-|`KC_INT4`              |`KC_HENK`           |JIS Henkan                                     |
-|`KC_INT5`              |`KC_MHEN`           |JIS Muhenkan                                   |
-|`KC_INT6`              |                    |JIS Numpad `,`                                 |
-|`KC_INT7`              |                    |International 7                                |
-|`KC_INT8`              |                    |International 8                                |
-|`KC_INT9`              |                    |International 9                                |
-|`KC_LANG1`             |`KC_HAEN`           |Hangul/English                                 |
-|`KC_LANG2`             |`KC_HANJ`           |Hanja                                          |
-|`KC_LANG3`             |                    |JIS Katakana                                   |
-|`KC_LANG4`             |                    |JIS Hiragana                                   |
-|`KC_LANG5`             |                    |JIS Zenkaku/Hankaku                            |
-|`KC_LANG6`             |                    |Language 6                                     |
-|`KC_LANG7`             |                    |Language 7                                     |
-|`KC_LANG8`             |                    |Language 8                                     |
-|`KC_LANG9`             |                    |Language 9                                     |
-|`KC_ALT_ERASE`         |`KC_ERAS`           |Alternate Erase                                |
-|`KC_SYSREQ`            |                    |SysReq/Attention                               |
-|`KC_CANCEL`            |                    |Cancel                                         |
-|`KC_CLEAR`             |`KC_CLR`            |Clear                                          |
-|`KC_PRIOR`             |                    |Prior                                          |
-|`KC_RETURN`            |                    |Return                                         |
-|`KC_SEPARATOR`         |                    |Separator                                      |
-|`KC_OUT`               |                    |Out                                            |
-|`KC_OPER`              |                    |Oper                                           |
-|`KC_CLEAR_AGAIN`       |                    |Clear/Again                                    |
-|`KC_CRSEL`             |                    |CrSel/Props                                    |
-|`KC_EXSEL`             |                    |ExSel                                          |
-|`KC_LCTRL`             |`KC_LCTL`           |Left Control                                   |
-|`KC_LSHIFT`            |`KC_LSFT`           |Left Shift                                     |
-|`KC_LALT`              |                    |Left Alt                                       |
-|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key)            |
-|`KC_RCTRL`             |`KC_RCTL`           |Right Control                                  |
-|`KC_RSHIFT`            |`KC_RSFT`           |Right Shift                                    |
-|`KC_RALT`              |                    |Right Alt                                      |
-|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)           |
-|`KC_SYSTEM_POWER`      |`KC_PWR`            |System Power Down                              |
-|`KC_SYSTEM_SLEEP`      |`KC_SLEP`           |System Sleep                                   |
-|`KC_SYSTEM_WAKE`       |`KC_WAKE`           |System Wake                                    |
-|`KC_AUDIO_MUTE`        |`KC_MUTE`           |Mute                                           |
-|`KC_AUDIO_VOL_UP`      |`KC_VOLU`           |Volume Up                                      |
-|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`           |Volume Down                                    |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`           |Next Track (Windows)                           |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`           |Previous Track (Windows)                       |
-|`KC_MEDIA_STOP`        |`KC_MSTP`           |Stop Track (Windows)                           |
-|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`           |Play/Pause Track                               |
-|`KC_MEDIA_SELECT`      |`KC_MSEL`           |Launch Media Player (Windows)                  |
-|`KC_MEDIA_EJECT`       |`KC_EJCT`           |Eject (macOS)                                  |
-|`KC_MAIL`              |                    |Launch Mail (Windows)                          |
-|`KC_CALCULATOR`        |`KC_CALC`           |Launch Calculator (Windows)                    |
-|`KC_MY_COMPUTER`       |`KC_MYCM`           |Launch My Computer (Windows)                   |
-|`KC_WWW_SEARCH`        |`KC_WSCH`           |Browser Search (Windows)                       |
-|`KC_WWW_HOME`          |`KC_WHOM`           |Browser Home (Windows)                         |
-|`KC_WWW_BACK`          |`KC_WBAK`           |Browser Back (Windows)                         |
-|`KC_WWW_FORWARD`       |`KC_WFWD`           |Browser Forward (Windows)                      |
-|`KC_WWW_STOP`          |`KC_WSTP`           |Browser Stop (Windows)                         |
-|`KC_WWW_REFRESH`       |`KC_WREF`           |Browser Refresh (Windows)                      |
-|`KC_WWW_FAVORITES`     |`KC_WFAV`           |Browser Favorites (Windows)                    |
-|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`           |Next Track (macOS)                             |
-|`KC_MEDIA_REWIND`      |`KC_MRWD`           |Previous Track (macOS)                         |
+|Key                    |Aliases                       |Description                                    |
+|-----------------------|------------------------------|-----------------------------------------------|
+|`KC_NO`                |`XXXXXXX`                     |Ignore this key (NOOP)                         |
+|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`          |Use the next lowest non-transparent key        |
+|`KC_A`                 |                              |`a` and `A`                                    |
+|`KC_B`                 |                              |`b` and `B`                                    |
+|`KC_C`                 |                              |`c` and `C`                                    |
+|`KC_D`                 |                              |`d` and `D`                                    |
+|`KC_E`                 |                              |`e` and `E`                                    |
+|`KC_F`                 |                              |`f` and `F`                                    |
+|`KC_G`                 |                              |`g` and `G`                                    |
+|`KC_H`                 |                              |`h` and `H`                                    |
+|`KC_I`                 |                              |`i` and `I`                                    |
+|`KC_J`                 |                              |`j` and `J`                                    |
+|`KC_K`                 |                              |`k` and `K`                                    |
+|`KC_L`                 |                              |`l` and `L`                                    |
+|`KC_M`                 |                              |`m` and `M`                                    |
+|`KC_N`                 |                              |`n` and `N`                                    |
+|`KC_O`                 |                              |`o` and `O`                                    |
+|`KC_P`                 |                              |`p` and `P`                                    |
+|`KC_Q`                 |                              |`q` and `Q`                                    |
+|`KC_R`                 |                              |`r` and `R`                                    |
+|`KC_S`                 |                              |`s` and `S`                                    |
+|`KC_T`                 |                              |`t` and `T`                                    |
+|`KC_U`                 |                              |`u` and `U`                                    |
+|`KC_V`                 |                              |`v` and `V`                                    |
+|`KC_W`                 |                              |`w` and `W`                                    |
+|`KC_X`                 |                              |`x` and `X`                                    |
+|`KC_Y`                 |                              |`y` and `Y`                                    |
+|`KC_Z`                 |                              |`z` and `Z`                                    |
+|`KC_1`                 |                              |`1` and `!`                                    |
+|`KC_2`                 |                              |`2` and `@`                                    |
+|`KC_3`                 |                              |`3` and `#`                                    |
+|`KC_4`                 |                              |`4` and `$`                                    |
+|`KC_5`                 |                              |`5` and `%`                                    |
+|`KC_6`                 |                              |`6` and `^`                                    |
+|`KC_7`                 |                              |`7` and `&`                                    |
+|`KC_8`                 |                              |`8` and `*`                                    |
+|`KC_9`                 |                              |`9` and `(`                                    |
+|`KC_0`                 |                              |`0` and `)`                                    |
+|`KC_ENTER`             |`KC_ENT`                      |Return (Enter)                                 |
+|`KC_ESCAPE`            |`KC_ESC`                      |Escape                                         |
+|`KC_BSPACE`            |`KC_BSPC`                     |Delete (Backspace)                             |
+|`KC_TAB`               |                              |Tab                                            |
+|`KC_SPACE`             |`KC_SPC`                      |Spacebar                                       |
+|`KC_MINUS`             |`KC_MINS`                     |`-` and `_`                                    |
+|`KC_EQUAL`             |`KC_EQL`                      |`=` and `+`                                    |
+|`KC_LBRACKET`          |`KC_LBRC`                     |`[` and `{`                                    |
+|`KC_RBRACKET`          |`KC_RBRC`                     |`]` and `}`                                    |
+|`KC_BSLASH`            |`KC_BSLS`                     |`\` and <code>&#124;</code>                    |
+|`KC_NONUS_HASH`        |`KC_NUHS`                     |Non-US `#` and `~`                             |
+|`KC_SCOLON`            |`KC_SCLN`                     |`;` and `:`                                    |
+|`KC_QUOTE`             |`KC_QUOT`                     |`'` and `"`                                    |
+|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK`           |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
+|`KC_COMMA`             |`KC_COMM`                     |`,` and `<`                                    |
+|`KC_DOT`               |                              |`.` and `>`                                    |
+|`KC_SLASH`             |`KC_SLSH`                     |`/` and `?`                                    |
+|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`          |Caps Lock                                      |
+|`KC_F1`                |                              |F1                                             |
+|`KC_F2`                |                              |F2                                             |
+|`KC_F3`                |                              |F3                                             |
+|`KC_F4`                |                              |F4                                             |
+|`KC_F5`                |                              |F5                                             |
+|`KC_F6`                |                              |F6                                             |
+|`KC_F7`                |                              |F7                                             |
+|`KC_F8`                |                              |F8                                             |
+|`KC_F9`                |                              |F9                                             |
+|`KC_F10`               |                              |F10                                            |
+|`KC_F11`               |                              |F11                                            |
+|`KC_F12`               |                              |F12                                            |
+|`KC_PSCREEN`           |`KC_PSCR`                     |Print Screen                                   |
+|`KC_SCROLLLOCK`        |`KC_SLCK`, `KC_BRMD`          |Scroll Lock, Brightness Down (macOS)           |
+|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)                   |
+|`KC_INSERT`            |`KC_INS`                      |Insert                                         |
+|`KC_HOME`              |                              |Home                                           |
+|`KC_PGUP`              |                              |Page Up                                        |
+|`KC_DELETE`            |`KC_DEL`                      |Forward Delete                                 |
+|`KC_END`               |                              |End                                            |
+|`KC_PGDOWN`            |`KC_PGDN`                     |Page Down                                      |
+|`KC_RIGHT`             |`KC_RGHT`                     |Right Arrow                                    |
+|`KC_LEFT`              |                              |Left Arrow                                     |
+|`KC_DOWN`              |                              |Down Arrow                                     |
+|`KC_UP`                |                              |Up Arrow                                       |
+|`KC_NUMLOCK`           |`KC_NLCK`                     |Keypad Num Lock and Clear                      |
+|`KC_KP_SLASH`          |`KC_PSLS`                     |Keypad `/`                                     |
+|`KC_KP_ASTERISK`       |`KC_PAST`                     |Keypad `*`                                     |
+|`KC_KP_MINUS`          |`KC_PMNS`                     |Keypad `-`                                     |
+|`KC_KP_PLUS`           |`KC_PPLS`                     |Keypad `+`                                     |
+|`KC_KP_ENTER`          |`KC_PENT`                     |Keypad Enter                                   |
+|`KC_KP_1`              |`KC_P1`                       |Keypad `1` and End                             |
+|`KC_KP_2`              |`KC_P2`                       |Keypad `2` and Down Arrow                      |
+|`KC_KP_3`              |`KC_P3`                       |Keypad `3` and Page Down                       |
+|`KC_KP_4`              |`KC_P4`                       |Keypad `4` and Left Arrow                      |
+|`KC_KP_5`              |`KC_P5`                       |Keypad `5`                                     |
+|`KC_KP_6`              |`KC_P6`                       |Keypad `6` and Right Arrow                     |
+|`KC_KP_7`              |`KC_P7`                       |Keypad `7` and Home                            |
+|`KC_KP_8`              |`KC_P8`                       |Keypad `8` and Up Arrow                        |
+|`KC_KP_9`              |`KC_P9`                       |Keypad `9` and Page Up                         |
+|`KC_KP_0`              |`KC_P0`                       |Keypad `0` and Insert                          |
+|`KC_KP_DOT`            |`KC_PDOT`                     |Keypad `.` and Delete                          |
+|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and <code>&#124;</code>             |
+|`KC_APPLICATION`       |`KC_APP`                      |Application (Windows Menu Key)                 |
+|`KC_POWER`             |                              |System Power (macOS)                           |
+|`KC_KP_EQUAL`          |`KC_PEQL`                     |Keypad `=`                                     |
+|`KC_F13`               |                              |F13                                            |
+|`KC_F14`               |                              |F14                                            |
+|`KC_F15`               |                              |F15                                            |
+|`KC_F16`               |                              |F16                                            |
+|`KC_F17`               |                              |F17                                            |
+|`KC_F18`               |                              |F18                                            |
+|`KC_F19`               |                              |F19                                            |
+|`KC_F20`               |                              |F20                                            |
+|`KC_F21`               |                              |F21                                            |
+|`KC_F22`               |                              |F22                                            |
+|`KC_F23`               |                              |F23                                            |
+|`KC_F24`               |                              |F24                                            |
+|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |
+|`KC_HELP`              |                              |Help                                           |
+|`KC_MENU`              |                              |Menu                                           |
+|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |
+|`KC_STOP`              |                              |Stop                                           |
+|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |
+|`KC_UNDO`              |                              |Undo                                           |
+|`KC_CUT`               |                              |Cut                                            |
+|`KC_COPY`              |                              |Copy                                           |
+|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |
+|`KC_FIND`              |                              |Find                                           |
+|`KC__MUTE`             |                              |Mute (macOS)                                   |
+|`KC__VOLUP`            |                              |Volume Up (macOS)                              |
+|`KC__VOLDOWN`          |                              |Volume Down (macOS)                            |
+|`KC_LOCKING_CAPS`      |`KC_LCAP`                     |Locking Caps Lock                              |
+|`KC_LOCKING_NUM`       |`KC_LNUM`                     |Locking Num Lock                               |
+|`KC_LOCKING_SCROLL`    |`KC_LSCR`                     |Locking Scroll Lock                            |
+|`KC_KP_COMMA`          |`KC_PCMM`                     |Keypad `,`                                     |
+|`KC_KP_EQUAL_AS400`    |                              |Keypad `=` on AS/400 keyboards                 |
+|`KC_INT1`              |`KC_RO`                       |JIS `\` and `_`                                |
+|`KC_INT2`              |`KC_KANA`                     |JIS Katakana/Hiragana                          |
+|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and <code>&#124;</code>                |
+|`KC_INT4`              |`KC_HENK`                     |JIS Henkan                                     |
+|`KC_INT5`              |`KC_MHEN`                     |JIS Muhenkan                                   |
+|`KC_INT6`              |                              |JIS Numpad `,`                                 |
+|`KC_INT7`              |                              |International 7                                |
+|`KC_INT8`              |                              |International 8                                |
+|`KC_INT9`              |                              |International 9                                |
+|`KC_LANG1`             |`KC_HAEN`                     |Hangul/English                                 |
+|`KC_LANG2`             |`KC_HANJ`                     |Hanja                                          |
+|`KC_LANG3`             |                              |JIS Katakana                                   |
+|`KC_LANG4`             |                              |JIS Hiragana                                   |
+|`KC_LANG5`             |                              |JIS Zenkaku/Hankaku                            |
+|`KC_LANG6`             |                              |Language 6                                     |
+|`KC_LANG7`             |                              |Language 7                                     |
+|`KC_LANG8`             |                              |Language 8                                     |
+|`KC_LANG9`             |                              |Language 9                                     |
+|`KC_ALT_ERASE`         |`KC_ERAS`                     |Alternate Erase                                |
+|`KC_SYSREQ`            |                              |SysReq/Attention                               |
+|`KC_CANCEL`            |                              |Cancel                                         |
+|`KC_CLEAR`             |`KC_CLR`                      |Clear                                          |
+|`KC_PRIOR`             |                              |Prior                                          |
+|`KC_RETURN`            |                              |Return                                         |
+|`KC_SEPARATOR`         |                              |Separator                                      |
+|`KC_OUT`               |                              |Out                                            |
+|`KC_OPER`              |                              |Oper                                           |
+|`KC_CLEAR_AGAIN`       |                              |Clear/Again                                    |
+|`KC_CRSEL`             |                              |CrSel/Props                                    |
+|`KC_EXSEL`             |                              |ExSel                                          |
+|`KC_LCTRL`             |`KC_LCTL`                     |Left Control                                   |
+|`KC_LSHIFT`            |`KC_LSFT`                     |Left Shift                                     |
+|`KC_LALT`              |                              |Left Alt                                       |
+|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`          |Left GUI (Windows/Command/Meta key)            |
+|`KC_RCTRL`             |`KC_RCTL`                     |Right Control                                  |
+|`KC_RSHIFT`            |`KC_RSFT`                     |Right Shift                                    |
+|`KC_RALT`              |`KC_ALGR`                     |Right Alt (AltGr)                              |
+|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`          |Right GUI (Windows/Command/Meta key)           |
+|`KC_SYSTEM_POWER`      |`KC_PWR`                      |System Power Down                              |
+|`KC_SYSTEM_SLEEP`      |`KC_SLEP`                     |System Sleep                                   |
+|`KC_SYSTEM_WAKE`       |`KC_WAKE`                     |System Wake                                    |
+|`KC_AUDIO_MUTE`        |`KC_MUTE`                     |Mute                                           |
+|`KC_AUDIO_VOL_UP`      |`KC_VOLU`                     |Volume Up                                      |
+|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`                     |Volume Down                                    |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track (Windows)                           |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track (Windows)                       |
+|`KC_MEDIA_STOP`        |`KC_MSTP`                     |Stop Track (Windows)                           |
+|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`                     |Play/Pause Track                               |
+|`KC_MEDIA_SELECT`      |`KC_MSEL`                     |Launch Media Player (Windows)                  |
+|`KC_MEDIA_EJECT`       |`KC_EJCT`                     |Eject (macOS)                                  |
+|`KC_MAIL`              |                              |Launch Mail (Windows)                          |
+|`KC_CALCULATOR`        |`KC_CALC`                     |Launch Calculator (Windows)                    |
+|`KC_MY_COMPUTER`       |`KC_MYCM`                     |Launch My Computer (Windows)                   |
+|`KC_WWW_SEARCH`        |`KC_WSCH`                     |Browser Search (Windows)                       |
+|`KC_WWW_HOME`          |`KC_WHOM`                     |Browser Home (Windows)                         |
+|`KC_WWW_BACK`          |`KC_WBAK`                     |Browser Back (Windows)                         |
+|`KC_WWW_FORWARD`       |`KC_WFWD`                     |Browser Forward (Windows)                      |
+|`KC_WWW_STOP`          |`KC_WSTP`                     |Browser Stop (Windows)                         |
+|`KC_WWW_REFRESH`       |`KC_WREF`                     |Browser Refresh (Windows)                      |
+|`KC_WWW_FAVORITES`     |`KC_WFAV`                     |Browser Favorites (Windows)                    |
+|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`                     |Next Track (macOS)                             |
+|`KC_MEDIA_REWIND`      |`KC_MRWD`                     |Previous Track (macOS)                         |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`                     |Brightness Up                                  |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`                     |Brightness Down                                |
 
 ## [Quantum Keycodes](quantum_keycodes.md#qmk-keycodes)
 
-|Key          |Aliases    |Description                                                          |
-|-------------|-----------|---------------------------------------------------------------------|
-|`RESET`      |           |Put the keyboard into DFU mode for flashing                          |
-|`DEBUG`      |           |Toggle debug mode                                                    |
-|`KC_GESC`    |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
-|`KC_LSPO`    |           |Left Shift when held, `(` when tapped                                |
-|`KC_RSPC`    |           |Right Shift when held, `)` when tapped                               |
-|`KC_LEAD`    |           |The [Leader key](feature_leader_key.md)                              |
-|`KC_LOCK`    |           |The [Lock key](feature_key_lock.md)                                  |
-|`FUNC(n)`    |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
-|`M(n)`       |           |Call macro `n`                                                       |
-|`MACROTAP(n)`|           |Macro-tap `n` idk FIXME                                              |
+|Key            |Aliases    |Description                                                          |
+|---------------|-----------|---------------------------------------------------------------------|
+|`RESET`        |           |Put the keyboard into DFU mode for flashing                          |
+|`DEBUG`        |           |Toggle debug mode                                                    |
+|`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
+|`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
+|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
+|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
+|`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
+|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
+|`M(n)`         |           |Call macro `n`                                                       |
+|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |
 
 ## [Audio Keys](feature_audio.md)
 
 |Key             |Aliases  |Description                       |
 |----------------|---------|----------------------------------|
-|`AU_ON`         |         |Audio mode on                     |
-|`AU_OFF`        |         |Audio mode off                    |
-|`AU_TOG`        |         |Toggles Audio mode                |
+|`AU_ON`         |         |Turns on Audio Feature            |
+|`AU_OFF`        |         |Turns off Audio Feature           |
+|`AU_TOG`        |         |Toggles Audio state               |
 |`CLICKY_TOGGLE` |`CK_TOGG`|Toggles Audio clicky mode         |
 |`CLICKY_UP`     |`CK_UP`  |Increases frequency of the clicks |
 |`CLICKY_DOWN`   |`CK_DOWN`|Decreases frequency of the clicks |
@@ -235,8 +238,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`MU_TOG`        |         |Toggles Music Mode                |
 |`MU_MOD`        |         |Cycles through the music modes    |
 
-
-
 ## [Backlighting](feature_backlight.md)
 
 |Key      |Description                               |
@@ -282,18 +283,18 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OUT_USB` |USB only                                      |
 |`OUT_BT`  |Bluetooth only                                |
 
-
 ## [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
 
-|Key         |Description                                                               |
-|-----------------|---------------------------------------------------------------------|
-|`DF(layer)`      |Switches the default layer                                           |
-|`MO(layer)`      |Momentarily activates layer, switches off when you let go            |
-|`LM(layer, mod)` |As `MO(layer)` but with `mod` active                                 |
-|`LT(layer, kc)`  |Momentarily activates layer if held, sends kc if tapped              |
-|`TG(layer)`      |Toggles the layer (enables it if no active, and vise versa)          |
-|`TO(layer)`      |Activates layer and deactivates all other layers                     |
-|`TT(layer)`      |Momentarily activates layer if held, toggles it if tapped repeatedly |
+|Key             |Description                                                                       |
+|----------------|----------------------------------------------------------------------------------|
+|`DF(layer)`     |Set the base (default) layer                                                      |
+|`MO(layer)`     |Momentarily turn on `layer` when pressed (requires `KC_TRNS` on destination layer)|
+|`OSL(layer)`    |Momentarily activates `layer` until a key is pressed. See [One Shot Keys](https://docs.qmk.fm/#/feature_advanced_keycodes?id=one-shot-keys) for details. |
+|`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well.  Where `mod` is a mods_bit.  Mods can be viewed [here](https://docs.qmk.fm/#/feature_advanced_keycodes?id=mod-tap).  Example Implementation: `LM(LAYER_1, MOD_LALT)`|
+|`LT(layer, kc)` |Turn on `layer` when held, `kc` when tapped                                       |
+|`TG(layer)`     |Toggle `layer` on or off                                                          |
+|`TO(layer)`     |Turn on `layer` when pressed                                                      |
+|`TT(layer)`     |Normally acts like MO unless it's tapped multiple times, which toggles `layer` on |
 
 ## [Mouse Keys](feature_mouse_keys.md)
 
@@ -318,44 +319,43 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Modifiers](feature_advanced_keycodes.md#modifier-keys)
 
-|Key       |Aliases               |Description                                         |
-|----------|----------------------|----------------------------------------------------|
-|`KC_HYPR` |                      |Hold Left Control, Shift, Alt and GUI               |
-|`KC_MEH`  |                      |Hold Left Control, Shift and Alt                    |
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|                      |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`ALTG(kc)`|                      |Hold Right Control and Alt and press `kc`           |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|Key       |Aliases                        |Description                                         |
+|----------|-------------------------------|----------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`KC_MEH`  |                               |Left Control, Shift and Alt                         |
+|`KC_HYPR` |                               |Left Control, Shift, Alt and GUI                    |
 
 ## [Mod-Tap Keys](feature_advanced_keycodes.md#mod-tap)
 
-|Key         |Aliases                                |Description                                            |
-|------------|---------------------------------------|-------------------------------------------------------|
-|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
-|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
-|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
-|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
-|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
-|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
-|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
-|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
+|Key         |Aliases                                                          |Description                                            |
+|------------|-----------------------------------------------------------------|-------------------------------------------------------|
+|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
+|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
+|`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
+|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 
 ## [RGB Lighting](feature_rgblight.md)
 
@@ -429,18 +429,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`                |
 |`KC_QUESTION`           |`KC_QUES`          |`?`                |
 
-## [Switching and Toggling Layers](feature_advanced_keycodes.md#switching-and-toggling-layers)
-
-|Key             |Description                                                                       |
-|----------------|----------------------------------------------------------------------------------|
-|`LT(layer, kc)` |Turn on `layer` when held, `kc` when tapped                                       |
-|`TO(layer)`     |Turn on `layer` when pressed                                                      |
-|`MO(layer)`     |Momentarily turn on `layer` when pressed (requires `KC_TRNS` on destination layer)|
-|`DF(layer)`     |Set the base (default) layer                                                      |
-|`TG(layer)`     |Toggle `layer` on or off                                                          |
-|`TT(layer)`     |Normally acts like MO unless it's tapped multiple times, which toggles `layer` on |
-|`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well.                  |
-
 ## [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
 
 |Key         |Description                       |
@@ -448,7 +436,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OSM(mod)`  |Hold `mod` for one keypress       |
 |`OSL(layer)`|Switch to `layer` for one keypress|
 
-
 ## [Swap Hands](feature_swap_hands.md)
 
 |Key        |Description                                                              |
@@ -460,9 +447,10 @@ This is a reference only. Each group of keys links to the page documenting their
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+
 ## [Unicode Support](feature_unicode.md)
 
-|Key         |Aliases|                                                 |
-|------------|-------|-------------------------------------------------|
-|`UNICODE(n)`|`UC(n)`|Send Unicode character `n`                       |
-|`X(n)`      |       |Send Unicode character `n` via a different method|
+|Key    |Description                                                                |
+|-------|---------------------------------------------------------------------------|
+|`UC(c)`|Send Unicode code point `c` (`UNICODE_ENABLE`)                             |
+|`X(i)` |Send Unicode code point at index `i` in `unicode_map` (`UNICODEMAP_ENABLE`)|

docs/keycodes_basic.md

@@ -97,14 +97,14 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Lock Keys
 
-|Key                |Aliases             |Description              |
-|-------------------|--------------------|-------------------------|
-|`KC_CAPSLOCK`      |`KC_CLCK`, `KC_CAPS`|Caps Lock                |
-|`KC_SCROLLLOCK`    |`KC_SLCK`           |Scroll Lock              |
-|`KC_NUMLOCK`       |`KC_NLCK`           |Keypad Num Lock and Clear|
-|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock        |
-|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock         |
-|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock      |
+|Key                |Aliases             |Description                         |
+|-------------------|--------------------|------------------------------------|
+|`KC_CAPSLOCK`      |`KC_CLCK`, `KC_CAPS`|Caps Lock                           |
+|`KC_SCROLLLOCK`    |`KC_SLCK`, `KC_BRMD`|Scroll Lock, Brightness Down (macOS)|
+|`KC_NUMLOCK`       |`KC_NLCK`           |Keypad Num Lock and Clear           |
+|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock                   |
+|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock                    |
+|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock                 |
 
 ## Modifiers
 
@@ -116,16 +116,16 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 |`KC_LGUI`  |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key) |
 |`KC_RCTRL` |`KC_RCTL`           |Right Control                       |
 |`KC_RSHIFT`|`KC_RSFT`           |Right Shift                         |
-|`KC_RALT`  |                    |Right Alt                           |
+|`KC_RALT`  |`KC_ALGR`           |Right Alt (AltGr)                   |
 |`KC_RGUI`  |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)|
 
 ## International
 
 |Key       |Aliases  |Description                    |
 |----------|---------|-------------------------------|
-|`KC_INT1` |`KC_RO`  |JIS `\` and <code>&#124;</code>|
+|`KC_INT1` |`KC_RO`  |JIS `\` and `_`                |
 |`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana          |
-|`KC_INT3` |`KC_JYEN`|JIS `¥`                        |
+|`KC_INT3` |`KC_JYEN`|JIS `¥` and <code>&#124;</code>|
 |`KC_INT4` |`KC_HENK`|JIS Henkan                     |
 |`KC_INT5` |`KC_MHEN`|JIS Muhenkan                   |
 |`KC_INT6` |         |JIS Numpad `,`                 |
@@ -144,48 +144,48 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Commands
 
-|Key               |Aliases            |Description                   |
-|------------------|-------------------|------------------------------|
-|`KC_PSCREEN`      |`KC_PSCR`          |Print Screen                  |
-|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`|Pause                         |
-|`KC_INSERT`       |`KC_INS`           |Insert                        |
-|`KC_HOME`         |                   |Home                          |
-|`KC_PGUP`         |                   |Page Up                       |
-|`KC_DELETE`       |`KC_DEL`           |Forward Delete                |
-|`KC_END`          |                   |End                           |
-|`KC_PGDOWN`       |`KC_PGDN`          |Page Down                     |
-|`KC_RIGHT`        |`KC_RGHT`          |Right Arrow                   |
-|`KC_LEFT`         |                   |Left Arrow                    |
-|`KC_DOWN`         |                   |Down Arrow                    |
-|`KC_UP`           |                   |Up Arrow                      |
-|`KC_APPLICATION`  |`KC_APP`           |Application (Windows Menu Key)|
-|`KC_POWER`        |                   |System Power (macOS/Linux)    |
-|`KC_EXECUTE`      |`KC_EXEC`          |Execute                       |
-|`KC_HELP`         |                   |Help                          |
-|`KC_MENU`         |                   |Menu                          |
-|`KC_SELECT`       |`KC_SLCT`          |Select                        |
-|`KC_STOP`         |                   |Stop                          |
-|`KC_AGAIN`        |`KC_AGIN`          |Again                         |
-|`KC_UNDO`         |                   |Undo                          |
-|`KC_CUT`          |                   |Cut                           |
-|`KC_COPY`         |                   |Copy                          |
-|`KC_PASTE`        |`KC_PSTE`          |Paste                         |
-|`KC_FIND`         |                   |Find                          |
-|`KC__MUTE`        |                   |Mute (macOS)                  |
-|`KC__VOLUP`       |                   |Volume Up (macOS)             |
-|`KC__VOLDOWN`     |                   |Volume Down (macOS)           |
-|`KC_ALT_ERASE`    |`KC_ERAS`          |Alternate Erase               |
-|`KC_SYSREQ`       |                   |SysReq/Attention              |
-|`KC_CANCEL`       |                   |Cancel                        |
-|`KC_CLEAR`        |`KC_CLR`           |Clear                         |
-|`KC_PRIOR`        |                   |Prior                         |
-|`KC_RETURN`       |                   |Return                        |
-|`KC_SEPARATOR`    |                   |Separator                     |
-|`KC_OUT`          |                   |Out                           |
-|`KC_OPER`         |                   |Oper                          |
-|`KC_CLEAR_AGAIN`  |                   |Clear/Again                   |
-|`KC_CRSEL`        |                   |CrSel/Props                   |
-|`KC_EXSEL`        |                   |ExSel                         |
+|Key               |Aliases                       |Description                   |
+|------------------|------------------------------|------------------------------|
+|`KC_PSCREEN`      |`KC_PSCR`                     |Print Screen                  |
+|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)  |
+|`KC_INSERT`       |`KC_INS`                      |Insert                        |
+|`KC_HOME`         |                              |Home                          |
+|`KC_PGUP`         |                              |Page Up                       |
+|`KC_DELETE`       |`KC_DEL`                      |Forward Delete                |
+|`KC_END`          |                              |End                           |
+|`KC_PGDOWN`       |`KC_PGDN`                     |Page Down                     |
+|`KC_RIGHT`        |`KC_RGHT`                     |Right Arrow                   |
+|`KC_LEFT`         |                              |Left Arrow                    |
+|`KC_DOWN`         |                              |Down Arrow                    |
+|`KC_UP`           |                              |Up Arrow                      |
+|`KC_APPLICATION`  |`KC_APP`                      |Application (Windows Menu Key)|
+|`KC_POWER`        |                              |System Power (macOS/Linux)    |
+|`KC_EXECUTE`      |`KC_EXEC`                     |Execute                       |
+|`KC_HELP`         |                              |Help                          |
+|`KC_MENU`         |                              |Menu                          |
+|`KC_SELECT`       |`KC_SLCT`                     |Select                        |
+|`KC_STOP`         |                              |Stop                          |
+|`KC_AGAIN`        |`KC_AGIN`                     |Again                         |
+|`KC_UNDO`         |                              |Undo                          |
+|`KC_CUT`          |                              |Cut                           |
+|`KC_COPY`         |                              |Copy                          |
+|`KC_PASTE`        |`KC_PSTE`                     |Paste                         |
+|`KC_FIND`         |                              |Find                          |
+|`KC__MUTE`        |                              |Mute (macOS)                  |
+|`KC__VOLUP`       |                              |Volume Up (macOS)             |
+|`KC__VOLDOWN`     |                              |Volume Down (macOS)           |
+|`KC_ALT_ERASE`    |`KC_ERAS`                     |Alternate Erase               |
+|`KC_SYSREQ`       |                              |SysReq/Attention              |
+|`KC_CANCEL`       |                              |Cancel                        |
+|`KC_CLEAR`        |`KC_CLR`                      |Clear                         |
+|`KC_PRIOR`        |                              |Prior                         |
+|`KC_RETURN`       |                              |Return                        |
+|`KC_SEPARATOR`    |                              |Separator                     |
+|`KC_OUT`          |                              |Out                           |
+|`KC_OPER`         |                              |Oper                          |
+|`KC_CLEAR_AGAIN`  |                              |Clear/Again                   |
+|`KC_CRSEL`        |                              |CrSel/Props                   |
+|`KC_EXSEL`        |                              |ExSel                         |
 
 ## Media Keys
 
@@ -219,6 +219,8 @@ Windows and macOS use different keycodes for "next track" and "previous track".
 |`KC_WWW_FAVORITES`     |`KC_WFAV`|Browser Favorites (Windows)  |
 |`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`|Next Track (macOS)           |
 |`KC_MEDIA_REWIND`      |`KC_MRWD`|Previous Track (macOS)       |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`|Brightness Up                |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`|Brightness Down              |
 
 ## Number Pad
 

docs/newbs.md

@@ -6,13 +6,18 @@ Not sure if your keyboard can run QMK? If it's a mechanical keyboard you built y
 
 ## Overview
 
-There are 5 main sections to this guide:
+There are 7 main sections to this guide:
 
 * [Getting Started](newbs_getting_started.md)
-* [Building Your First Firmware](newbs_building_firmware.md)
+* [Building Your First Firmware using the command line](newbs_building_firmware.md)
+* [Building Your First Firmware using the online GUI](newbs_building_firmware_configurator.md)
 * [Flashing Firmware](newbs_flashing.md)
 * [Testing and Debugging](newbs_testing_debugging.md)
-* [Best Practices](newbs_best_practices.md)
+* [Git Best Practices](newbs_best_practices.md)
 * [Learn More with these Resources](newbs_learn_more_resources.md)
 
 This guide is focused on helping someone who has never compiled software before. It makes choices and recommendations based on that viewpoint. There are alternative methods for many of these procedures, and we support most of those alternatives. If you have any doubt about how to accomplish a task you can [ask us for guidance](getting_started_getting_help.md).
+
+## Additional Resources
+
+* [Thomas Baart's QMK Basics Blog](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – A user-created blog covering the basics of how to use QMK Firmware, as seen from a new user's perspective.

docs/newbs_building_firmware_configurator.md

@@ -0,0 +1,105 @@
+# QMK Configurator
+
+The [QMK Configurator](https://config.qmk.fm) is an online graphical user interface that generates QMK Firmware hex files.  
+
+?> **Please follow these steps in order.**
+
+Watch the [Video Tutorial](https://youtu.be/7RH-1pAbjvw)
+
+The QMK Configurator works best with Chrome/Firefox. 
+
+
+!> **Files from other tools such as KLE, or kbfirmware will not be compatible with QMK Configurator. Do not load them, do not import them. QMK Configurator is a DIFFERENT tool. **
+
+## Selecting your keyboard
+
+Click the drop down box and select the keyboard you want to create a keymap for. 
+
+?> If your keyboard has several versions, make sure you select the correct one.** 
+
+I'll say that again because it's important
+
+!> **MAKE SURE YOU SELECT THE RIGHT VERSION!**
+
+If your keyboard has been advertised to be powered by QMK but is not in the list, chances are a developer hasn't gotten to it yet or we haven't had a chance to merge it in yet. File an issue at [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) requesting to support that particular keyboard, if there is no active [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) for it. There are also QMK powered keyboards that are in their manufacturer's own github accounts. Double check for that as well. 
+
+## Selecting your keyboard layout
+
+Choose the layout that best represents the keymap you want to create. Some keyboards do not have enough layouts or correct layouts defined yet. They will be supported in the future. 
+
+## Keymap Name
+
+Call this keymap what you want. 
+
+?> If you are running into issues when compiling, it may be worth changing this name, as it may already exist in the QMK  Firmware repo.
+
+## Creating Your Keymap
+
+Keycode Entry is accomplished in 3 ways.  
+1. Drag and dropping 
+2. Clicking on an empty spot on the layout and clicking the keycode you desire
+3. Clicking on an empty spot on the layout, pressing the physical key on your keyboard. 
+
+Hover your mouse over a key and a short blurb will tell you what that keycode does. For a more verbose description please see    
+
+[Basic Keycode Reference](https://docs.qmk.fm/#/keycodes_basic)    
+[Advanced Keycode Reference](https://docs.qmk.fm/#/feature_advanced_keycodes)    
+
+In the event that you can't find a layout that supports your keymap, for example three spots for spacebar, or two spots for backspace, or 2 spots for shift etc etc, Fill them ALL up. 
+
+### Example:
+
+3 spots for spacebar: Fill them ALL with spacebar
+
+2 spots for backspace: Fill them BOTH with backspace
+
+2 spots for right shift: Fill them BOTH with right shift
+
+1 spot for left shift and 1 spot for iso support: Fill them both with left shift
+
+5 spots, but only 4 keys: Guess and check or ask someone who has done it before. 
+
+## Saving Your Keymap for Future Edits
+
+When you're satisfied with your keymap or just want to work on it later, press the `Export Keymap` button. It will save your keymap as the name you chose above appended with .json. 
+
+You can then load this .json file in the future by pressing the `Import Keymap` button. 
+
+!> **CAUTION:** This is not the same type of .json file used for kbfirmware.com or any other tool. If you try to use this for those tools, or the .json from those tools with QMK Configurator, there is a chance your keyboard will **explode**. 
+
+## Generating your firmware file
+
+Press the green `Compile` button.
+
+When the compilation is done, you will be able to press the green `Download Firmware` button. 
+
+## Flashing Your Keyboard
+
+Please refer to [Flashing Firmware](newbs_flashing.md)
+
+## Troubleshooting
+
+#### My .json file is not working
+
+If the .json file was generated with QMK Configurator, congratulations you have stumbled upon a bug. File an issue at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)
+
+If not....how did you miss my big bold message at the top saying not to use other .json files? 
+
+#### There are extra spaces in my layout? What do I do? 
+
+If you're referring to having three spots for space bar, the best course of action is to just fill them all with space bar. The same can be done for backspace and shifts
+
+#### What is the keycode for.......
+
+Please see
+
+[Basic Keycode Reference](https://docs.qmk.fm/#/keycodes_basic)    
+[Advanced Keycode Reference](https://docs.qmk.fm/#/feature_advanced_keycodes)    
+
+#### It won't compile
+
+Please double check the other layers of your keymap to make sure there are no random keys present. 
+
+## Problems and Bugs
+
+We are always accepting customer requests and bug reports. Please file them at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)

docs/newbs_getting_started.md

@@ -1,99 +1,100 @@
 # Introduction
 
-Your computer keyboard has a processor inside of it, not unlike the one inside your computer. This processor runs software that is responsible for detecting button presses and sending reports about the state of the keyboard when they are pressed or released. QMK fills the role of that software, detecting button presses and passing that information on to the host computer. When you build your custom layout you are creating the equivalent of an .exe for your keyboard.
+Your computer keyboard has a processor inside of it, not unlike the one inside your computer. This processor runs software that is responsible for detecting button presses and sending reports about the state of the keyboard when buttons are pressed or released. QMK fills the role of that software, detecting button presses and passing that information on to the host computer. When you build your custom keymap, you are creating the equivalent of an executable program for your keyboard.
 
-QMK tries to put a lot of power into your hands by making easy things easy, and hard things possible. You don't have to know how to program to create powerful layouts, you only have to follow a few simple syntax rules.
+QMK tries to put a lot of power into your hands by making easy things easy, and hard things possible. You don't have to know how to program to create powerful keymaps — you only have to follow a few simple syntax rules.
 
 # Getting Started
 
-Before you can build keymaps you need to install some software and setup your build environment. This only has to be done one time no matter how many keyboards you want to compile firmware for.
+Before you can build keymaps, you need to install some software and set up your build environment. This only has to be done once no matter how many keyboards you plan to compile firmware for. 
+
+If you would prefer a more graphical user interface approach, please consider using the online [QMK Configurator](https://config.qmk.fm). Please refer to [Building Your First Firmware using the online GUI](newbs_building_firmware_configurator.md). 
+
 
 ## Download Software
 
 ### Text Editor
 
-You'll need a program that can edit and save **plain text** files. If you are on Windows you can make due with Notepad, and on Linux you can use Gedit, both of which are simple but functional text editors. On macOS be careful with TextEdit.app, it will not save plain text files unless you make sure to select "Make Plain text" from the "Format" menu, or you can use another program such as Sublime Text.
+You'll need a program that can edit and save **plain text** files. If you're on Windows you can make do with Notepad, and on Linux you can use gedit. Both of these are simple but functional text editors. On macOS, be careful with the default TextEdit app: it will not save plain text files unless you explicitly select _Make Plain Text_ from the _Format_ menu.
+
+You can also download and install a dedicated text editor like [Sublime Text](https://www.sublimetext.com/) or [VS Code](https://code.visualstudio.com/). This is probably the best way to go regardless of platform, as these programs are specifically made for editing code.
 
 ?> Not sure which text editor to use? Laurence Bradford wrote [a great introduction](https://learntocodewith.me/programming/basics/text-editors/) to the subject.
 
 ### QMK Toolbox
 
-QMK Toolbox is an optional graphical Windows and macOS program that allows you to both program and debug your custom keyboard. You will likely prefer it to easily flash your keyboard and receive the debugging messages that your keyboard will print.
+QMK Toolbox is an optional graphical program for Windows and macOS that allows you to both program and debug your custom keyboard. You will likely find it invaluable for easily flashing your keyboard and viewing debug messages that it prints.
 
-Download the files from the links below:
+[Download the latest release here.](https://github.com/qmk/qmk_toolbox/releases/latest)
 
-For Windows: "qmk_toolbox.exe" or "qmk_toolbox_install.exe" (with installer)
+* For Windows: `qmk_toolbox.exe` (portable) or `qmk_toolbox_install.exe` (installer)
+* For macOS: `QMK.Toolbox.app.zip` (portable) or `QMK.Toolbox.pkg` (installer)
 
-For Mac: "QMK.Toolbox.app.zip" or "QMK.Toolbox.pkg" (with installer)
+## Set Up Your Environment
 
-* [Newest Release](https://github.com/qmk/qmk_toolbox/releases/latest)
-* [Source Code](https://github.com/qmk/qmk_toolbox/)
+We've tried to make QMK as easy to set up as possible. You only have to prepare your Linux or Unix environment, then let QMK install the rest.
 
-## Environment Setup
-
-We've tried to make QMK as easy to setup as possible. You only have to prepare your Linux or Unix environment and let QMK install the rest.
-
-?> If you haven't worked with the Linux/Unix command line before there are a few basic concepts and commands you should learn. These resources will teach you enough to work with QMK:<br>
+?> If you haven't worked with the Linux/Unix command line before, there are a few basic concepts and commands you should learn. These resources will teach you enough to be able to work with QMK:<br>
 [Must Know Linux Commands](https://www.guru99.com/must-know-linux-commands.html)<br>
 [Some Basic Unix Commands](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
 
 ### Windows
 
-You will need to install msys2 and git.
+You will need to install MSYS2 and Git.
 
-* Follow the installation instructions on the msys2 homepage: http://www.msys2.org
-* Close any open msys2 terminals, and open a new terminal
-* Install git by running this command: `pacman -S git`
+* Follow the installation instructions on the [MSYS2 homepage](http://www.msys2.org).
+* Close any open MSYS2 terminals and open a new MSYS2 MinGW 64-bit terminal.
+* Install Git by running this command: `pacman -S git`.
 
 ### macOS
 
-You will need to install homebrew. Follow the instructions on the homebrew homepage: https://brew.sh
+You will need to install Homebrew. Follow the instructions on the [Homebrew homepage](https://brew.sh).
 
-After homebrew is installed continue with "Download QMK", following step "Setup QMK" runs a script that will install other packages.
+After Homebrew is installed, continue with _Set Up QMK_. In that step you will run a script that will install other packages.
 
 ### Linux
 
-You will need to install git. It's extremely likely you already have it, but if not one of the following commands should install it:
+You will need to install Git. It's very likely that you already have it, but if not, one of the following commands should install it:
 
-* Debian/Ubuntu/Devuan: `apt-get install git`
-* Fedora/Redhat/Centos: `yum install git`
+* Debian / Ubuntu / Devuan: `apt-get install git`
+* Fedora / Red Hat / CentOS: `yum install git`
 * Arch: `pacman -S git`
 
-## Download QMK
+?> Docker is also an option on all platforms. [Click here for details.](getting_started_build_tools.md#docker)
 
-Once you have setup your Linux/Unix environment you are ready to download QMK. We will do this by using git to "clone" the QMK repository. Open a Terminal or MSYS2 Console window and leave it open for the remainder of this guide. Inside that window run these two commands:
+## Set Up QMK
+
+Once you have set up your Linux/Unix environment, you are ready to download QMK. We will do this by using Git to "clone" the QMK repository. Open a Terminal or MSYS2 MinGW window and leave it open for the remainder of this guide. Inside that window run these two commands:
 
     git clone https://github.com/qmk/qmk_firmware.git
     cd qmk_firmware
 
-?> If you already know [how to use GitHub](getting_started_github.md) we recommend you create and clone your own fork instead. If you don't know what that means you can safely ignore this message.
+?> If you already know [how to use GitHub](getting_started_github.md), we recommend that you create and clone your own fork instead. If you don't know what that means, you can safely ignore this message.
 
-## Setup QMK
+QMK comes with a script to help you set up the rest of what you'll need. You should run it now by typing in this command:
 
-QMK comes with a script to help you setup the rest of what you'll need. You should run it now by typing in this command:
-
-    ./util/qmk_install.sh
+    util/qmk_install.sh
 
 ## Test Your Build Environment
 
-Now that your QMK build environment is setup you can build a firmware for your keyboard. Start by trying to build the default layout for your keyboard. You should be able to do that with a command in this format:
+Now that your QMK build environment is set up, you can build a firmware for your keyboard. Start by trying to build the keyboard's default keymap. You should be able to do that with a command in this format:
 
     make <keyboard>:default
 
-For example, to build a firmware for a Clueboard 66% use:
+For example, to build a firmware for a Clueboard 66% you would use:
 
     make clueboard/66/rev3:default
 
 When it is done you should have a lot of output that ends similar to this:
 
 ```
-Linking: .build/clueboard_66_rev2_default.elf                                                       [OK]
-Creating load file for flashing: .build/clueboard_66_rev2_default.hex                               [OK]
-Copying clueboard_66_rev2_default.hex to qmk_firmware folder                                        [OK]
-Checking file size of clueboard_66_rev2_default.hex                                                 [OK]
- * File size is fine - 25174/28672
+Linking: .build/clueboard_66_rev3_default.elf                                                       [OK]
+Creating load file for flashing: .build/clueboard_66_rev3_default.hex                               [OK]
+Copying clueboard_66_rev3_default.hex to qmk_firmware folder                                        [OK]
+Checking file size of clueboard_66_rev3_default.hex                                                 [OK]
+ * The firmware size is fine - 26356/28672 (2316 bytes free)
 ```
 
-## Creating Your Layout
+# Creating Your Keymap
 
-Now you are ready to create your own personal layout. Move on to [Building Your First Firmware](newbs_building_firmware.md) for that.
+You are now ready to create your own personal keymap! Move on to [Building Your First Firmware](newbs_building_firmware.md) for that.

docs/newbs_testing_debugging.md

@@ -28,6 +28,6 @@ Sometimes it's useful to print debug messages from within your [custom code](cus
 After that you can use a few different print functions:
 
 * `print("string")`: Print a simple string.
-* `sprintf("%s string", var)`: Print a formatted string
+* `uprintf("%s string", var)`: Print a formatted string
 * `dprint("string")` Print a simple string, but only when debug mode is enabled
 * `dprintf("%s string", var)`: Print a formatted string, but only when debug mode is enabled

docs/proton_c_conversion.md

@@ -0,0 +1,21 @@
+# Converting a board to use the Proton C
+
+If a board currently supported in QMK uses a Pro Micro (or compatible board) and you want to use the Proton C, you can generate the firmware by appending `CONVERT_TO_PROTON_C=yes` (or `CTPC=yes`) to your make argument, like this:
+
+    make 40percentclub/mf68:default CTPC=yes
+
+You can add the same argument to your keymap's `rules.mk`, which will accomplish the same thing.
+
+This exposes the `CONVERT_TO_PROTON_C` flag that you can use in your code with `#ifdef`s, like this:
+
+    #ifdef CONVERT_TO_PROTON_C
+        // Proton C code
+    #else
+        // Pro Micro code
+    #endif
+
+Before being able to compile, you may get some errors about `PORTB/DDRB`, etc not being defined, so you'll need to convert the keyboard's code to use the [GPIO Controls](internals_gpio_control.md) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all.
+
+The Proton C only has one on-board LED (C13), and by default, the TXLED (D5) is mapped to it. If you want the RXLED (B0) mapped to it instead, add this like to your `config.h`:
+
+    #define CONVERT_TO_PROTON_C_RXLED

docs/quantum_keycodes.md

@@ -8,15 +8,16 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are
 
 ## QMK Keycodes
 
-|Key          |Aliases    |Description                                                          |
-|-------------|-----------|---------------------------------------------------------------------|
-|`RESET`      |           |Put the keyboard into DFU mode for flashing                          |
-|`DEBUG`      |           |Toggle debug mode                                                    |
-|`KC_GESC`    |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
-|`KC_LSPO`    |           |Left Shift when held, `(` when tapped                                |
-|`KC_RSPC`    |           |Right Shift when held, `)` when tapped                               |
-|`KC_LEAD`    |           |The [Leader key](feature_leader_key.md)                              |
-|`KC_LOCK`    |           |The [Lock key](feature_key_lock.md)                                  |
-|`FUNC(n)`    |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
-|`M(n)`       |           |Call macro `n`                                                       |
-|`MACROTAP(n)`|           |Macro-tap `n` idk FIXME                                              |
+|Key            |Aliases    |Description                                                          |
+|---------------|-----------|---------------------------------------------------------------------|
+|`RESET`        |           |Put the keyboard into DFU mode for flashing                          |
+|`DEBUG`        |           |Toggle debug mode                                                    |
+|`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
+|`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
+|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
+|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
+|`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
+|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
+|`M(n)`         |           |Call macro `n`                                                       |
+|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |

docs/ref_functions.md

@@ -96,3 +96,24 @@ And to do so, add `reset_keyboard()` to your function or macro, and this will re
 If you're having issues with Audio, RGB Underglow, backlighting or keys acting weird, then you can reset the EEPROM (persistent setting storage).  Bootmagic is one way to do this, but if that isn't enabled, then you can use a custom macro to do so.
 
 To wipe the EEPROM, run `eeconfig_init()` from your function or macro to reset most of the settings to default.
+
+## Tap random key
+
+If you want to send a random character to the host computer, you can use the `tap_random_base64()` function. This [pseudorandomly](https://en.wikipedia.org/wiki/Pseudorandom_number_generator) selects a number between 0 and 63, and then sends a key press based on that selection. (0–25 is `A`–`Z`, 26–51 is `a`–`z`, 52–61 is `0`–`9`, 62 is `+` and 63 is `/`).  
+
+?> Needless to say, but this is _not_ a cryptographically secure method of generating random Base64 keys or passwords.
+
+## Software Timers
+
+It's possible to start timers and read values for time-specific events. Here's an example:
+
+```c
+static uint16_t key_timer;
+key_timer = timer_read();
+
+if (timer_elapsed(key_timer) < 100) {
+  // do something if less than 100ms have passed
+} else {
+  // do something if 100ms or more have passed
+}
+```

docs/reference_configurator_support.md

@@ -0,0 +1,195 @@
+# Supporting Your Keyboard in QMK Configurator
+
+This page covers how to properly support keyboards in the [QMK Configurator](https://config.qmk.fm/).
+
+
+## How the Configurator Understands Keyboards
+
+To understand how the Configurator understands keyboards, first one must understand layout macros. For this exercise, we're going to imagine a 17-key numpad PCB, which we're going to call `numpad`.
+
+```
+┌───┬───┬───┬───┐
+│NLk│ / │ * │ - │
+├───┼───┼───┼───┤
+│7  │8  │9  │ + │
+├───┼───┼───┤   │
+│4  │5  │6  │   │
+├───┼───┼───┼───┤
+│1  │2  │3  │Ent│
+├───┴───┼───┤   │
+│0      │ . │   │
+└───────┴───┴───┘
+```
+
+?> For more on layout macros, see [Understanding QMK: Matrix Scanning](understanding_qmk.md?id=matrix-scanning) and [Understanding QMK: Matrix to Physical Layout Map](understanding_qmk.md?id=matrix-to-physical-layout-map).
+
+The Configurator's API reads the keyboard's `.h` file from `qmk_firmware/keyboards/<keyboard>/<keyboard>.h`. For our numpad, this file would be `qmk_firmware/keyboards/numpad/numpad.h`:
+
+```c
+#pragma once
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22,      \
+    k30, k31, k32, k33, \
+    k40,      k42       \
+  ) { \
+    { k00, k01,   k02, k03   }, \
+    { k10, k11,   k12, k13   }, \
+    { k20, k21,   k22, KC_NO }, \
+    { k30, k31,   k32, k33   }, \
+    { k40, KC_NO, k42, KC_NO }  \
+}
+```
+
+QMK uses `KC_NO` to designate places in the switch matrix where there is no switch. Sometimes, `XXX`, `___` or `____` are used as shorthand to make this section easier to read if it needs to be debugged. This is usually defined near the beginning of the `.h` file:
+
+```c
+#pragma once
+
+#define XXX KC_NO
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22,      \
+    k30, k31, k32, k33, \
+    k40,      k42       \
+  ) { \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, XXX }, \
+    { k30, k31, k32, k33 }, \
+    { k40, XXX, k42, XXX }  \
+}
+```
+
+!> This usage differs from that of keymap macros, which almost always use `XXXXXXX` (seven capital X's) for `KC_NO` and `_______` (seven underscores) for `KC_TRNS`.
+
+!> To prevent user confusion, using `KC_NO` is preferred.
+
+The layout macro tells the Configurator that our keyboard has 17 keys, arranged in five rows of four columns each. Our switch positions are named `k<row><column>`, counting from 0. The names themselves actually don't matter, as long as they match between the top section, which receives the keycodes from the keymap, and the bottom half which designates where each key is in the matrix.
+
+To display our keyboard in a way that resembles the physical keyboard, we need to build a JSON file that tells the Configurator how to tie the physical locations and sizes of our keys to our switch matrix.
+
+## Building the JSON file
+
+To build the JSON file, the easiest way is to build the layout in [Keyboard Layout Editor](http://www.keyboard-layout-editor.com/) ("KLE"), from which we'll feed the Raw Data into a QMK tool that converts this data into a JSON the Configurator will read and use. Since KLE opens by default with a numpad layout, we're just going to remove the Getting Started instructions, and use what's left.
+
+Once the layout is as desired, move to the Raw Data tab in KLE, and copy the contents:
+
+```
+["Num Lock","/","*","-"],
+["7\nHome","8\n↑","9\nPgUp",{h:2},"+"],
+["4\n←","5","6\n→"],
+["1\nEnd","2\n↓","3\nPgDn",{h:2},"Enter"],
+[{w:2},"0\nIns",".\nDel"]
+```
+
+To convert this data into our JSON, go to the [QMK KLE-JSON Converter](https://qmk.fm/converter/), paste the Raw Data into the Input field, and click the Convert button. After a moment, our JSON data will appear in the Output field. Copy the contents to a new text document, and name the document `info.json`, saving it in the same folder that contains `numpad.h`.
+
+Use the `keyboard_name` object to set the name of the keyboard. The `bootloader` object is deprecated, so it can be deleted. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality.
+
+```json
+{
+    "keyboard_name": "Numpad",
+    "url": "",
+    "maintainer": "qmk",
+    "tags": {
+        "form_factor": "numpad"
+    },
+    "width": 4,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Num Lock", "x":0, "y":0},
+                {"label":"/", "x":1, "y":0},
+                {"label":"*", "x":2, "y":0},
+                {"label":"-", "x":3, "y":0},
+                {"label":"7", "x":0, "y":1},
+                {"label":"8", "x":1, "y":1},
+                {"label":"9", "x":2, "y":1},
+                {"label":"+", "x":3, "y":1, "h":2},
+                {"label":"4", "x":0, "y":2},
+                {"label":"5", "x":1, "y":2},
+                {"label":"6", "x":2, "y":2},
+                {"label":"1", "x":0, "y":3},
+                {"label":"2", "x":1, "y":3},
+                {"label":"3", "x":2, "y":3},
+                {"label":"Enter", "x":3, "y":3, "h":2},
+                {"label":"0", "x":0, "y":4, "w":2},
+                {"label":".", "x":2, "y":4}
+            ]
+        }
+    }
+}
+```
+
+The `layouts` object contains the data that represents the physical layout of the keyboard. It has an object `LAYOUT`, which needs to match the name of our layout macro from `numpad.h`. The `LAYOUT` object itself has an object named `layout`, which contains one JSON object for each physical key on our keyboard, formatted as follows:
+
+```
+  ┌ The name of the key. Not displayed in the Configurator.
+  │                   ┌ The key's X-axis location, in key units from the
+  │                   │ keyboard's left edge.
+  │                   │      ┌ The key's Y-axis location, in key units from
+  │                   │      │ the keyboard's top (rear-facing) edge.
+  ↓                   ↓      ↓
+{"label":"Num Lock", "x":0, "y":0},
+```
+
+Some objects will also have `"w"` and `"h"` keys, which represent a key's width and height, respectively.
+
+?> For more on the `info.json` files, see [QMK Keyboard Guidelines: Keyboard Metadata](hardware_keyboard_guidelines.md?id=keyboard-metadata)
+
+
+## How the Configurator Programs Keys
+
+The Configurator's API uses the layout macro and the JSON file we've given it to create a visual representation of the keyboard that has each visual object tied to a specific key, in sequence:
+
+key in layout macro | JSON object used
+:---: | :----
+k00   | {"label":"Num Lock", "x":0, "y":0}
+k01   | {"label":"/", "x":1, "y":0}
+k02   | {"label":"*", "x":2, "y":0}
+k03   | {"label":"-", "x":3, "y":0}
+k10   | {"label":"7", "x":0, "y":1}
+k11   | {"label":"8", "x":1, "y":1}
+k12   | {"label":"9", "x":2, "y":1}
+k13   | {"label":"+", "x":3, "y":1, "h":2}
+k20   | {"label":"4", "x":0, "y":2}
+k21   | {"label":"5", "x":1, "y":2}
+k22   | {"label":"6", "x":2, "y":2}
+k30   | {"label":"1", "x":0, "y":3}
+k31   | {"label":"2", "x":1, "y":3}
+k32   | {"label":"3", "x":2, "y":3}
+k33   | {"label":"Enter", "x":3, "y":3, "h":2}
+k40   | {"label":"0", "x":0, "y":4, "w":2}
+k42   | {"label":".", "x":2, "y":4}
+
+When a user selects the top-left key in the Configurator, and assigns Num Lock to it, the Configurator builds a keymap file with `KC_NLCK` as the first key, and so on as the keymap is built. The `label` keys are not used; they are only for the user's reference in identifying specific keys when debugging the `info.json` file.
+
+
+## Issues and Hazards
+
+Currently, the Configurator does not support key rotation or non-rectangular key shapes like ISO Enter. Additionally, keys that are vertically-offset from their "row" &mdash; the arrow keys on 1800-layouts like the [TKC1800](https://github.com/qmk/qmk_firmware/tree/4ac48a61a66206beaf2fdd5f2939d8bbedd0004c/keyboards/tkc1800/) being a prominent example &mdash; confuse the KLE-to-JSON Converter, if not adjusted for by the contributor of the `info.json` file.
+
+### Workarounds
+
+#### Non-rectangular keys
+
+For ISO Enter keys, QMK custom is to display it as a rectangular key, 1.25u wide and 2u high, aligned so its right edge is aligned with the right edge of the alphanumeric key block.
+
+![](https://i.imgur.com/JKngtTw.png)  
+*A 60% keyboard in standard ISO layout, as rendered by QMK Configurator.*
+
+#### Vertically-offset keys
+
+For vertically-offset keys, place them in KLE as if they were not offset, then edit the Y-values as needed in the converted JSON file
+
+![](https://i.imgur.com/fmDvDzR.png)  
+*An 1800-layout keyboard as rendered in Keyboard Layout Editor, without the vertical offset applied to the arrow keys.*
+
+![](https://i.imgur.com/8beYMBR.png)  
+*A Unix diff file, showing the changes needed to vertically-offset the arrow keys in our keyboard's JSON file.*

docs/reference_info_json.md

@@ -0,0 +1,73 @@
+# `info.json`
+
+This file is used by the [QMK API](https://github.com/qmk/qmk_api). It contains the information [QMK Configurator](https://config.qmk.fm/) needs to display a representation of your keyboard. You can also set metadata here.
+
+You can create `info.json` files at every level under `qmk_firmware/keyboards/<name>` to specify this metadata. These files are combined, with more specific files overriding keys in less specific files. This means you do not need to duplicate your metadata information. For example, `qmk_firmware/keyboards/clueboard/info.json` specifies `manufacturer` and `maintainer`, while `qmk_firmware/keyboards/clueboard/66/info.json` specifies more specific information about Clueboard 66%.
+
+## `info.json` Format
+
+The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
+
+* `keyboard_name`
+  * A free-form text string describing the keyboard.
+  * Example: `Clueboard 66%`
+* `url`
+  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
+* `maintainer`
+  * GitHub username of the maintainer, or `qmk` for community maintained boards
+* `width`
+  * Width of the board in Key Units
+* `height`
+  * Height of the board in Key Units
+* `layouts`
+  * Physical Layout representations. See the next section for more detail.
+
+### Layout Format
+
+Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
+
+* `width`
+  * Optional: The width of the layout in Key Units
+* `height`
+  * Optional: The height of the layout in Key Units
+* `key_count`
+  * **Required**: The number of keys in this layout
+* `layout`
+  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
+
+### Key Dictionary Format
+
+Each Key Dictionary in a layout describes the physical properties of a key. If you are familiar with the Raw Code for <http://keyboard-layout-editor.com> you will find many of the concepts the same. We re-use the same key names and layout choices wherever possible, but unlike keyboard-layout-editor each key is stateless, inheriting no properties from the keys that came before it.
+
+All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
+
+* `x`
+  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
+* `y`
+  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
+* `w`
+  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+* `h`
+  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+* `r`
+  * How many degrees clockwise to rotate the key.
+* `rx`
+  * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x`
+* `ry`
+  * The absolute position of the point to rotate the key around in the vertical axis. Default: `y`
+* `ks`
+  * Key Shape: define a polygon by providing a list of points, in Key Units.
+  * **Important**: These are relative to the top-left of the key, not absolute.
+  * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]`
+* `label`
+  * What to name this position in the matrix.
+  * This should usually be the same name as what is silkscreened on the PCB at this location.
+
+## How is the Metadata Exposed?
+
+This metadata is primarily used in two ways:
+
+* To allow web-based configurators to dynamically generate UI
+* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter.
+
+Configurator authors can see the [QMK Compiler](https://docs.api.qmk.fm/using-the-api) docs for more information on using the JSON API.

docs/support.md

@@ -0,0 +1,43 @@
+# Support
+
+If you need help with something, the best place to get quick support is going to be on our [Discord Server](https://discord.gg/Uq7gcHh).  There is usually somebody online, and there are a bunch of very helpful people there.
+
+Don't forget to read our [Code of Conduct](https://qmk.fm/coc/).
+
+## Help! I don't know where to start! 
+
+If this is the case, then you should start with our [Newbs Guide](https://docs.qmk.fm/#/newbs). There is a lot of great info there, and that should cover everything you need to get started.
+
+If that's an issue, hop onto the [QMK Configurator](https://config.qmk.fm), as that will handle a majority of what you need there. 
+
+## Help! I'm having issues flashing!
+
+First, head to the [Compiling/Flashing FAQ Page](https://docs.qmk.fm/#/faq_build). There is a good deal of info there, and you'll find a bunch of solutions to common issues there. 
+
+## Help, I have an issue that isn't covered by the links above
+
+Okay, that's fine. Then please check the [open issues in our GitHub](https://github.com/qmk/qmk_firmware/issues) to see if somebody is experiencing the same thing (make sure it's not just similar, but actually the same).  
+
+If you can't find anything, then please open a [new issue](https://github.com/qmk/qmk_firmware/issues/new)!
+
+## What if I found a bug? 
+
+Then please open an [issue](https://github.com/qmk/qmk_firmware/issues/new), and if you know how to fix it, open up a Pull Request on GitHub with the fix.
+
+## But `git` and `GitHub` are intimidating! 
+
+Don't worry, we have some pretty nice [Guidelines](https://docs.qmk.fm/#/newbs_best_practices) on how to start using `git` and GitHub to make things easier to develop. 
+
+Additionally, you can find additional `git` and GitHub related links [here](https://docs.qmk.fm/#/newbs_learn_more_resources).
+
+## I have a Keyboard that I want to add support for
+
+Awesome! Open up a Pull Request for it. We'll review the code, and merge it!  
+
+### What if I want to do brand it with `QMK`? 
+
+That's amazing! We would love to assist you with that! 
+
+In fact, we have a [whole page](https://qmk.fm/powered/) dedicated to adding QMK Branding to your page and keyboard. This covers pretty much everything you need (knowledge and images) to officially support QMK.
+
+If you have any questions about this, open an issue or head to [Discord](https://discord.gg/Uq7gcHh). 

docs/understanding_qmk.md

@@ -12,7 +12,7 @@ You can think of QMK as no different from any other computer program. It is star
 
 The reason for this is the different platforms that QMK supports. The most common platform is `lufa`, which runs on AVR processors such at the atmega32u4. We also support `chibios` and `vusb`.
 
-We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1019). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1060). This is [The Main Loop](#the-main-loop).
+We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1028). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1069). This is [The Main Loop](#the-main-loop).
 
 ## The Main Loop
 
@@ -22,7 +22,7 @@ This section of code is called "The Main Loop" because it's responsible for loop
     keyboard_task();
 ```
 
-This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/common/keyboard.c#L206), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
+This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
 
 Within `keyboard_task()` you'll find code to handle:
 
@@ -77,7 +77,7 @@ At the keyboard level we define a C macro (typically named `KEYMAP()`) which map
 
 Notice how the second block of our `KEYMAP()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
 
-You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
+You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
 
 ##### Keycode Assignment
 
@@ -130,31 +130,33 @@ Comparing against our keymap we can see that the pressed key is KC_NLCK. From he
 
 ##### Process Record
 
-The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions.  Depending on options set in rule.mk or elsewhere, only a subset of the functions below will be included in final firmware.
+The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions. Depending on options set in `rules.mk` or elsewhere, only a subset of the functions below will be included in final firmware.
 
-* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/tmk_core/common/action.c#L172)
-  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L193)
-    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L213)
-    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_tap_dance.c#L115)
-    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_key_lock.c#L62)
-    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_clicky.c#L44)
-    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/card.c#L20)
-      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
-    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/fdd0f915271f79b104aa5d216566bcc3fd134e85/quantum/rgb_matrix.c#L139)
-    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_midi.c#L81)
-    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_audio.c#L19)
-    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_steno.c#L160)
-    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_music.c#L114)
-    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_tap_dance.c#L136)
-    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_leader.c#L38)
-    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_combo.c#L115)
-    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicode.c#L22)
-    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_ucis.c#L91)
-    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_printer.c#L77)
-    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_auto_shift.c#L94)
-    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicodemap.c#L47)
-    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_terminal.c#L264)
-    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/quantum.c#L287)
+* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172)
+  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206)
+    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226)
+    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119)
+    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62)
+    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79)
+    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20)
+      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
+    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139)
+    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81)
+    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19)
+    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160)
+    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114)
+    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141)
+    * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169)
+      calls one of:
+        * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20)
+        * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46)
+        * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95)
+    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51)
+    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115)
+    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77)
+    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94)
+    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264)
+    * [Identify and process Quantum-specific keycodes](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291)
 
 At any step during this chain of events a function (such as `process_record_kb()`) can `return false` to halt all further processing.
 

docs/zh/README.md

@@ -0,0 +1,32 @@
+# QMK鍵盤固件
+
+[![當前版本](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)
+[![築邦](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware)
+[![不和諧](https://img.shields.io/discord/440868230475677696.svg)](https://discord.gg/Uq7gcHh)
+[![文檔狀態](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm)
+[![GitHub的貢獻者](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
+[![GitHub的叉](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
+
+## 什麼是QMK固件？
+
+QMK是一個由社群維護的開源鍵盤韌體，其中包含了QMK Toolbox、qmk.fm和其它文件。QMK韌體是以[tmk\_keyboard](http://github.com/tmk/tmk_keyboard)為基礎，讓一些有用的功能在Atmel AVR控制器實現，使用於[OLKB](https://olkb.com)、[ergodox EZ](http://www.ergodox-ez.com)，和[Clueboard](http://clueboard.co/)的產品中。它也被移植到使用ChibiOS的ARM晶片上。你也可以用它來讓你徒手佈線，或是客製的鍵盤PCB發揮功能。
+
+## 如何得到QMK
+
+如果你打算貢獻鍵盤佈局，鍵盤或功能QMK，最容易做的事情是[叉通過Github上爬行](https://github.com/qmk/qmk_firmware#fork-destination-box)，和克隆你爬在本地進行更改，推動他們，然後打開從你的叉子[拉請求](https://github.com/qmk/qmk_firmware/pulls)。
+
+否則，您可以直接下載([拉鍊](https://github.com/qmk/qmk_firmware/zipball/master) [焦油](https://github.com/qmk/qmk_firmware/tarball/master))，或者通過GIT中克隆它(`git@github.com:qmk/qmk_firmware.git`)或HTTP(`https://github.com/qmk/qmk_firmware.git`)。
+
+## 如何編譯
+
+你可以編譯之前，你需要[安裝環境](getting_started_build_tools.md)用於AVR或/和ARM開發。一旦完成，你會使用`make`命令建立一個鍵盤並用以下符號鍵盤佈局
+
+    make planck/rev4:default
+
+這將建立`rev4` `planck`的修訂與`default`鍵盤映射。並非所有鍵盤有一個修訂版(也稱為子項目或文件夾)，在這種情況下，它可以被省略：
+
+    make preonic:default
+
+## 如何赶近
+
+QMK有很多[特點](features.md)探索和很好的協議[參考文獻](http://docs.qmk.fm)挖通的。大部分功能通過修改[鍵盤映射(keymap.md)，並改變[鍵碼](keycodes.md)冤大頭。

docs/zh/_summary.md

@@ -0,0 +1,99 @@
+* [完全指南菜鳥](zh/newbs.md)
+  * [入門](zh/newbs_getting_started.md)
+  * [構建第一個固件](zh/newbs_building_firmware.md)
+  * [刷新固件](zh/newbs_flashing.md)
+  * [測試和調試](zh/newbs_testing_debugging.md)
+  * [最佳實踐](zh/newbs_best_practices.md)
+  * [學習資源](zh/newbs_learn_more_resources.md)
+
+* [QMK基礎](zh/README.md)
+  * [QMK簡介](zh/getting_started_introduction.md)
+  * [特約QMK](zh/contributing.md)
+  * [如何使用Github上](zh/getting_started_github.md)
+  * [獲得幫助](zh/getting_started_getting_help.md)
+
+* [常問問題](zh/faq.md)
+  * [常問問題](zh/faq_general.md)
+  * [構建/編譯QMK](zh/faq_build.md)
+  * [調試/故障排除QMK](zh/faq_debug.md)
+  * [鍵盤佈局](zh/faq_keymap.md)
+
+* 詳細指南
+  * [安裝編譯工具](zh/getting_started_build_tools.md)
+  * [流浪漢指南](zh/getting_started_vagrant.md)
+  * [構建/編譯器指令](zh/getting_started_make_guide.md)
+  * [刷新固件](zh/flashing.md)
+  * [定制功能](zh/custom_quantum_functions.md)
+  * [鍵盤映射概述](zh/keymap.md)
+
+* [硬件](zh/hardware.md)
+  * [AVR處理器](zh/hardware_avr.md)
+  * [司機](zh/hardware_drivers.md)
+
+* 參考
+  * [Keyboard Guidelines](zh/hardware_keyboard_guidelines.md)
+  * [Config Options](zh/config_options.md)
+  * [Keycodes](zh/keycodes.md)
+  * [Documentation Best Practices](zh/documentation_best_practices.md)
+  * [Documentation Templates](zh/documentation_templates.md)
+  * [Glossary](zh/reference_glossary.md)
+  * [Unit Testing](zh/unit_testing.md)
+  * [Useful Functions](zh/ref_functions.md)
+  * [Configurator Support](zh/reference_configurator_support.md)
+
+* [特點](zh/features.md)
+  * [Basic Keycodes](zh/keycodes_basic.md)
+  * [Quantum Keycodes](zh/quantum_keycodes.md)
+  * [Advanced Keycodes](zh/feature_advanced_keycodes.md)
+  * [Audio](zh/feature_audio.md)
+  * [Auto Shift](zh/feature_auto_shift.md)
+  * [Backlight](zh/feature_backlight.md)
+  * [Bluetooth](zh/feature_bluetooth.md)
+  * [Bootmagic](zh/feature_bootmagic.md)
+  * [Combos](zh/feature_combo)
+  * [Command](zh/feature_command.md)
+  * [Dynamic Macros](zh/feature_dynamic_macros.md)
+  * [Encoders](zh/feature_encoders.md)
+  * [Grave Escape](zh/feature_grave_esc.md)
+  * [Key Lock](zh/feature_key_lock.md)
+  * [Layouts](zh/feature_layouts.md)
+  * [Leader Key](zh/feature_leader_key.md)
+  * [Macros](zh/feature_macros.md)
+  * [Mouse Keys](zh/feature_mouse_keys.md)
+  * [One Shot Keys](zh/feature_advanced_keycodes.md#one-shot-keys)
+  * [Pointing Device](zh/feature_pointing_device.md)
+  * [PS/2 Mouse](zh/feature_ps2_mouse.md)
+  * [RGB Lighting](zh/feature_rgblight.md)
+  * [RGB Matrix](zh/feature_rgb_matrix.md)
+  * [Space Cadet Shift](zh/feature_space_cadet_shift.md)
+  * [Space Cadet Shift Enter](zh/feature_space_cadet_shift_enter.md)
+  * [Stenography](zh/feature_stenography.md)
+  * [Swap Hands](zh/feature_swap_hands.md)
+  * [Tap Dance](zh/feature_tap_dance.md)
+  * [Terminal](zh/feature_terminal.md)
+  * [Thermal Printer](zh/feature_thermal_printer.md)
+  * [Unicode](zh/feature_unicode.md)
+  * [Userspace](zh/feature_userspace.md)
+  * [US ANSI Shifted Keys](zh/keycodes_us_ansi_shifted.md)
+
+* 對於製造商和遊戲模組
+  * [Hand Wiring Guide](zh/hand_wire.md)
+  * [ISP Flashing Guide](zh/isp_flashing_guide.md)
+  * [ARM Debugging Guide](zh/arm_debugging.md)
+  * [I2C Driver](zh/i2c_driver.md)
+
+* 為了更深入的了解
+  * [How Keyboards Work](zh/how_keyboards_work.md)
+  * [Understanding QMK](zh/understanding_qmk.md)
+
+* 其它主題
+  * [Using Eclipse with QMK](zh/eclipse.md)
+
+* QMK內部（進行中）
+  * [Defines](zh/internals_defines.md)
+  * [Input Callback Reg](zh/internals_input_callback_reg.md)
+  * [Midi Device](zh/internals_midi_device.md)
+  * [Midi Device Setup Process](zh/internals_midi_device_setup_process.md)
+  * [Midi Util](zh/internals_midi_util.md)
+  * [Send Functions](zh/internals_send_functions.md)
+  * [Sysex Tools](zh/internals_sysex_tools.md)

drivers/arm/i2c_master.c

@@ -26,12 +26,13 @@
  */
 
 #include "i2c_master.h"
+#include "quantum.h"
 #include <string.h>
 #include <hal.h>
 
 static uint8_t i2c_address;
 
-// This configures the I2C clock to 400Mhz assuming a 72Mhz clock
+// This configures the I2C clock to 400khz assuming a 72Mhz clock
 // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 static const I2CConfig i2cconfig = {
   STM32_TIMINGR_PRESC(15U) |
@@ -41,13 +42,17 @@ static const I2CConfig i2cconfig = {
   0
 };
 
+__attribute__ ((weak))
 void i2c_init(void)
 {
-  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
+  // Try releasing special pins for a short time
+  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT);
+
   chThdSleepMilliseconds(10);
 
-  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
-  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }

drivers/arm/i2c_master.h

@@ -26,6 +26,16 @@
 #include "ch.h"
 #include <hal.h>
 
+#ifndef I2C1_BANK
+    #define I2C1_BANK GPIOB
+#endif
+#ifndef I2C1_SCL
+    #define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+    #define I2C1_SDA 7
+#endif
+
 #ifndef I2C_DRIVER
   #define I2C_DRIVER I2CD1
 #endif
@@ -34,6 +44,7 @@ void i2c_init(void);
 uint8_t i2c_start(uint8_t address);
 uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_stop(uint16_t timeout);

drivers/avr/apa102.c

@@ -0,0 +1,101 @@
+/*
+* APA102 lib V1.0a
+*
+* Controls APA102 RGB-LEDs
+* Author: Mikkel (Duckle29 on github)
+*
+* Dec 22th, 2017  v1.0a Initial Version
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "apa102.h"
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "debug.h"
+
+// Setleds for standard RGB
+void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds){
+  apa102_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF));
+}
+
+void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK){
+  pinMode(RGB_DI_PIN, PinDirectionOutput);
+  pinMode(RGB_CLK_PIN, PinDirectionOutput);
+
+  apa102_send_array((uint8_t*)ledarray,leds)
+}
+
+void apa102_send_array(uint8_t *data, uint16_t leds){ // Data is struct of 3 bytes. RGB - leds is number of leds in data
+  apa102_start_frame();
+  while(leds--){
+    apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r);
+    data++;
+  }
+  apa102_end_frame(leds);
+}
+
+void apa102_send_frame(uint32_t frame){
+  for(uint32_t i=0xFF; i>0;){
+    apa102_send_byte(frame & i);
+    i = i << 8;
+  }
+}
+
+void apa102_start_frame(){
+  apa102_send_frame(0);
+}
+
+void apa102_end_frame(uint16_t leds)
+{
+  // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h
+  // and adapted. The code is MIT licensed. I think thats compatible?
+
+  // We need to send some more bytes to ensure that all the LEDs in the
+  // chain see their new color and start displaying it.
+  //
+  // The data stream seen by the last LED in the chain will be delayed by
+  // (count - 1) clock edges, because each LED before it inverts the clock
+  // line and delays the data by one clock edge.  Therefore, to make sure
+  // the last LED actually receives the data we wrote, the number of extra
+  // edges we send at the end of the frame must be at least (count - 1).
+  // For the APA102C, that is sufficient.
+  //
+  // The SK9822 only updates after it sees 32 zero bits followed by one more
+  // rising edge.  To avoid having the update time depend on the color of
+  // the last LED, we send a dummy 0xFF byte.  (Unfortunately, this means
+  // that partial updates of the beginning of an LED strip are not possible;
+  // the LED after the last one you are trying to update will be black.)
+  // After that, to ensure that the last LED in the chain sees 32 zero bits
+  // and a rising edge, we need to send at least 65 + (count - 1) edges.  It
+  // is sufficent and simpler to just send (5 + count/16) bytes of zeros.
+  //
+  // We are ignoring the specification for the end frame in the APA102/SK9822
+  // datasheets because it does not actually ensure that all the LEDs will
+  // start displaying their new colors right away.
+
+  apa102_send_byte(0xFF);
+  for (uint16_t i = 0; i < 5 + leds / 16; i++){
+    apa102_send_byte(0);
+  }
+}
+
+void apa102_send_byte(uint8_t byte){
+  uint8_t i;
+  for (i = 0; i < 8; i++){
+    digitalWrite(RGB_DI_PIN, !!(byte & (1 << (7-i)));
+    digitalWrite(RGB_CLK_PIN, PinLevelHigh);
+  }
+}

drivers/avr/apa102.h

@@ -0,0 +1,46 @@
+/*
+ * light weight WS2812 lib include
+ *
+ * Version 2.3  - Nev 29th 2015
+ * Author: Tim (cpldcpu@gmail.com)
+ *
+ * Please do not change this file! All configuration is handled in "ws2812_config.h"
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+
+#include "rgblight_types.h"
+
+
+/* User Interface
+ *
+ * Input:
+ *         ledarray:           An array of GRB data describing the LED colors
+ *         number_of_leds:     The number of LEDs to write
+ *         pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
+ *
+ * The functions will perform the following actions:
+ *         - Set the data-out pin as output
+ *         - Send out the LED data
+ *         - Wait 50<35>s to reset the LEDs
+ */
+
+void apa102_setleds     (LED_TYPE *ledarray, uint16_t number_of_leds);
+void apa102_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
+void apa102_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);

drivers/avr/i2c_master.c

@@ -179,6 +179,9 @@ i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16
   status = i2c_write(regaddr, timeout);
   if (status) return status;
 
+  status = i2c_stop(timeout);
+  if (status) return status;
+
   status = i2c_start(devaddr | 0x01, timeout);
   if (status) return status;
 
@@ -217,4 +220,4 @@ i2c_status_t i2c_stop(uint16_t timeout)
   }
 
   return I2C_STATUS_SUCCESS;
-}
+}

drivers/avr/i2c_slave.c

@@ -9,23 +9,26 @@
 
 #include "i2c_slave.h"
 
-void i2c_init(uint8_t address){
+volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
+
+static volatile uint8_t buffer_address;
+static volatile bool slave_has_register_set = false;
+
+void i2c_slave_init(uint8_t address){
     // load address into TWI address register
     TWAR = (address << 1);
     // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
     TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }
 
-void i2c_stop(void){
+void i2c_slave_stop(void){
     // clear acknowledge and enable bits
     TWCR &= ~((1 << TWEA) | (1 << TWEN));
 }
 
 ISR(TWI_vect){
     uint8_t ack = 1;
-    // temporary stores the received data
-    //uint8_t data;
-    
+
     switch(TW_STATUS){
         case TW_SR_SLA_ACK:
             // The device is now a slave receiver
@@ -38,13 +41,13 @@ ISR(TWI_vect){
             if(!slave_has_register_set){
                 buffer_address = TWDR;
 
-                if (buffer_address >= RX_BUFFER_SIZE){ // address out of bounds dont ack
-                    ack = 0;
-                    buffer_address = 0;
+                if (buffer_address >= I2C_SLAVE_REG_COUNT) {  // address out of bounds dont ack
+                  ack            = 0;
+                  buffer_address = 0;
                 }
                 slave_has_register_set = true; // address has been receaved now fill in buffer
             } else {
-                rxbuffer[buffer_address] = TWDR;
+                i2c_slave_reg[buffer_address] = TWDR;
                 buffer_address++;
             }
             break;
@@ -52,7 +55,7 @@ ISR(TWI_vect){
         case TW_ST_SLA_ACK:
         case TW_ST_DATA_ACK:
             // This device is a slave transmitter and master has requested data
-            TWDR = txbuffer[buffer_address];
+            TWDR = i2c_slave_reg[buffer_address];
             buffer_address++;
             break;
 
@@ -63,6 +66,6 @@ ISR(TWI_vect){
             break;
     }
 
-    // Reset i2c state mahcine to be ready for next interrupt
+    // Reset i2c state machine to be ready for next interrupt
     TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN);
 }

drivers/avr/i2c_slave.h

@@ -8,16 +8,11 @@
 #ifndef I2C_SLAVE_H
 #define I2C_SLAVE_H
 
-#define TX_BUFFER_SIZE 30
-#define RX_BUFFER_SIZE 30
+#define I2C_SLAVE_REG_COUNT 30
 
-volatile uint8_t buffer_address;
-static volatile bool slave_has_register_set = false;
-volatile uint8_t txbuffer[TX_BUFFER_SIZE];
-volatile uint8_t rxbuffer[RX_BUFFER_SIZE];
+extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
 
-void i2c_init(uint8_t address);
-void i2c_stop(void);
-ISR(TWI_vect);
+void i2c_slave_init(uint8_t address);
+void i2c_slave_stop(void);
 
 #endif // I2C_SLAVE_H

drivers/avr/ws2812.c

@@ -128,11 +128,11 @@ unsigned char I2C_Write(unsigned char c)
         c <<= 1;
     }
 
-    
+
     I2C_WriteBit(0);
     _delay_us(I2C_DELAY);
     _delay_us(I2C_DELAY);
-  
+
     // _delay_us(I2C_DELAY);
     //return I2C_ReadBit();
     return 0;

drivers/boards/GENERIC_STM32_F303XC/board.h

@@ -18,14 +18,14 @@
 #define _BOARD_H_
 
 /*
- * Setup for Clueboard 60% Keyboard
+ * Setup for Generic STM32_F303 Board
  */
 
 /*
  * Board identifier.
  */
 #define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME                  "Clueboard 60 PCB"
+#define BOARD_NAME                  "STM32_F303"
 
 /*
  * Board oscillators-related settings.
@@ -245,7 +245,7 @@
  * PA15 - ROW4
  */
 #define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_PIN0) |         \
-                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_ALTERNATE(GPIOA_PIN1) |           \
                                      PIN_MODE_INPUT(GPIOA_PIN2) |           \
                                      PIN_MODE_INPUT(GPIOA_PIN3) |           \
                                      PIN_MODE_INPUT(GPIOA_PIN4) |           \
@@ -277,7 +277,7 @@
                                      PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
                                      PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
 #define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_PIN0) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN1) |       \
                                      PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
                                      PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
                                      PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
@@ -293,11 +293,11 @@
                                      PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
                                      PIN_OSPEED_VERYLOW(GPIOA_PIN15))
 #define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_PIN0) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_FLOATING(GPIOA_PIN1) |         \
                                      PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
                                      PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
                                      PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
-                                     PIN_PUPDR_FLOATING(GPIOA_PIN5) |   \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |   \
                                      PIN_PUPDR_PULLUP(GPIOA_PIN6) |    \
                                      PIN_PUPDR_FLOATING(GPIOA_PIN7) |  \
                                      PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
@@ -325,7 +325,7 @@
                                      PIN_ODR_HIGH(GPIOA_SWCLK) |            \
                                      PIN_ODR_HIGH(GPIOA_PIN15))
 #define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_PIN0, 0) |         \
-                                     PIN_AFIO_AF(GPIOA_PIN1, 0) |           \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 1) |           \
                                      PIN_AFIO_AF(GPIOA_PIN2, 0) |           \
                                      PIN_AFIO_AF(GPIOA_PIN3, 0) |           \
                                      PIN_AFIO_AF(GPIOA_PIN4, 0) |           \

drivers/haptic/DRV2605L.c

@@ -0,0 +1,129 @@
+/* Copyright 2018 ishtob
+ * Driver for DRV2605L written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "DRV2605L.h"
+#include "print.h"
+#include <stdlib.h>
+#include <stdio.h>
+#include <math.h>
+
+
+uint8_t DRV2605L_transfer_buffer[20];
+uint8_t DRV2605L_tx_register[0];
+uint8_t DRV2605L_read_buffer[0];
+uint8_t DRV2605L_read_register;
+
+
+void DRV_write(uint8_t drv_register, uint8_t settings) {
+  DRV2605L_transfer_buffer[0] = drv_register;
+  DRV2605L_transfer_buffer[1] = settings;
+  i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100);
+}
+
+uint8_t DRV_read(uint8_t regaddress) {
+  DRV2605L_tx_register[0] = regaddress;
+  if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1,
+    DRV2605L_tx_register, 1,
+    DRV2605L_read_buffer, 1
+)){
+    printf("err reading reg \n");
+  }
+  DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+return DRV2605L_read_register;
+}
+
+void DRV_init(void)
+{
+  i2c_init();
+  i2c_start(DRV2605L_BASE_ADDRESS);
+
+  /* 0x07 sets DRV2605 into calibration mode */
+  DRV_write(DRV_MODE,0x07); 
+
+//  DRV_write(DRV_FEEDBACK_CTRL,0xB6);
+    
+  #if FB_ERM_LRA == 0
+    /* ERM settings */
+  DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE/21.33)*1000);
+  #if ERM_OPEN_LOOP == 0
+  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK*(DRIVE_TIME+BLANKING_TIME+IDISS_TIME))/0.02133)/(DRIVE_TIME-0.0003))); 
+  #elif ERM_OPEN_LOOP == 1
+  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
+  #endif
+  #elif FB_ERM_LRA == 1
+  DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150+(SAMPLE_TIME*50))*0.000001)) + 0.0003)* F_LRA)/0.02071)));
+  #if LRA_OPEN_LOOP == 0
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK/sqrt(1-(F_LRA*0.0008))/0.02133)));
+  #elif LRA_OPEN_LOOP == 1
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
+  #endif
+  #endif
+      
+  DRVREG_FBR FB_SET;
+    FB_SET.Bits.ERM_LRA = FB_ERM_LRA;
+    FB_SET.Bits.BRAKE_FACTOR = FB_BRAKEFACTOR;
+    FB_SET.Bits.LOOP_GAIN =FB_LOOPGAIN;
+    FB_SET.Bits.BEMF_GAIN = 0; /* auto-calibration populates this field*/
+    DRV_write(DRV_FEEDBACK_CTRL, (uint8_t) FB_SET.Byte);
+  DRVREG_CTRL1 C1_SET;
+    C1_SET.Bits.C1_DRIVE_TIME = DRIVE_TIME;
+    C1_SET.Bits.C1_AC_COUPLE = AC_COUPLE;
+    C1_SET.Bits.C1_STARTUP_BOOST = STARTUP_BOOST;
+    DRV_write(DRV_CTRL_1, (uint8_t) C1_SET.Byte);
+  DRVREG_CTRL2 C2_SET;
+    C2_SET.Bits.C2_BIDIR_INPUT = BIDIR_INPUT;
+    C2_SET.Bits.C2_BRAKE_STAB = BRAKE_STAB;
+    C2_SET.Bits.C2_SAMPLE_TIME = SAMPLE_TIME;
+    C2_SET.Bits.C2_BLANKING_TIME = BLANKING_TIME;
+    C2_SET.Bits.C2_IDISS_TIME = IDISS_TIME;
+    DRV_write(DRV_CTRL_2, (uint8_t) C2_SET.Byte);
+  DRVREG_CTRL3 C3_SET;
+    C3_SET.Bits.C3_LRA_OPEN_LOOP = LRA_OPEN_LOOP;
+    C3_SET.Bits.C3_N_PWM_ANALOG = N_PWM_ANALOG;
+    C3_SET.Bits.C3_LRA_DRIVE_MODE = LRA_DRIVE_MODE;
+    C3_SET.Bits.C3_DATA_FORMAT_RTO = DATA_FORMAT_RTO;
+    C3_SET.Bits.C3_SUPPLY_COMP_DIS = SUPPLY_COMP_DIS;
+    C3_SET.Bits.C3_ERM_OPEN_LOOP = ERM_OPEN_LOOP;
+    C3_SET.Bits.C3_NG_THRESH = NG_THRESH;
+    DRV_write(DRV_CTRL_3, (uint8_t) C3_SET.Byte);
+  DRVREG_CTRL4 C4_SET;
+    C4_SET.Bits.C4_ZC_DET_TIME = ZC_DET_TIME;
+    C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME;
+    DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte);
+  DRV_write(DRV_LIB_SELECTION,LIB_SELECTION);
+  //start autocalibration
+  DRV_write(DRV_GO, 0x01);
+
+  /* 0x00 sets DRV2605 out of standby and to use internal trigger
+   * 0x01 sets DRV2605 out of standby and to use external trigger */
+  DRV_write(DRV_MODE,0x00); 
+  
+  /* 0x06: LRA library */
+  DRV_write(DRV_WAVEFORM_SEQ_1, 0x01);
+
+  /* 0xB9: LRA, 4x brake factor, medium gain, 7.5x back EMF
+   * 0x39: ERM, 4x brake factor, medium gain, 1.365x back EMF */
+  
+  /* TODO: setup auto-calibration as part of initiation */
+
+}
+
+void DRV_pulse(uint8_t sequence)
+{
+  DRV_write(DRV_GO, 0x00);
+  DRV_write(DRV_WAVEFORM_SEQ_1, sequence);
+  DRV_write(DRV_GO, 0x01);
+}

drivers/haptic/DRV2605L.h

@@ -0,0 +1,394 @@
+/* Copyright 2018 ishtob
+ * Driver for DRV2605L written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "i2c_master.h"
+
+/* Initialization settings
+
+ * Feedback Control Settings */
+#ifndef FB_ERM_LRA
+#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
+#endif
+#ifndef FB_BRAKEFACTOR
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#endif
+#ifndef FB_LOOPGAIN
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+#endif
+
+#ifndef RATED_VOLTAGE
+#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#ifndef V_PEAK
+#define V_PEAK 2.8
+#endif
+#endif
+
+/* LRA specific settings */
+#if FB_ERM_LRA == 1
+#ifndef V_RMS
+#define V_RMS 2.0
+#endif
+#ifndef V_PEAK
+#define V_PEAK 2.1
+#endif
+#ifndef F_LRA
+#define F_LRA 205
+#endif
+#endif
+
+/* Library Selection */
+#ifndef LIB_SELECTION
+#if FB_ERM_LRA == 1
+#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+#else
+#define LIB_SELECTION 1
+#endif
+#endif
+
+/* Control 1 register settings */
+#ifndef DRIVE_TIME
+#define DRIVE_TIME 25
+#endif
+#ifndef AC_COUPLE
+#define AC_COUPLE 0
+#endif
+#ifndef STARTUP_BOOST
+#define STARTUP_BOOST 1
+#endif
+
+/* Control 2 Settings */
+#ifndef BIDIR_INPUT
+#define BIDIR_INPUT 1
+#endif
+#ifndef BRAKE_STAB
+#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
+#endif
+#ifndef SAMPLE_TIME 
+#define SAMPLE_TIME 3
+#endif
+#ifndef BLANKING_TIME
+#define BLANKING_TIME 1
+#endif
+#ifndef IDISS_TIME
+#define IDISS_TIME 1
+#endif
+
+/* Control 3 settings */
+#ifndef NG_THRESH
+#define NG_THRESH 2
+#endif
+#ifndef ERM_OPEN_LOOP
+#define ERM_OPEN_LOOP 1
+#endif
+#ifndef SUPPLY_COMP_DIS
+#define SUPPLY_COMP_DIS 0
+#endif
+#ifndef DATA_FORMAT_RTO
+#define DATA_FORMAT_RTO 0
+#endif
+#ifndef LRA_DRIVE_MODE
+#define LRA_DRIVE_MODE 0
+#endif
+#ifndef N_PWM_ANALOG
+#define N_PWM_ANALOG 0
+#endif
+#ifndef LRA_OPEN_LOOP
+#define LRA_OPEN_LOOP 0
+#endif
+
+/* Control 4 settings */
+#ifndef ZC_DET_TIME
+#define ZC_DET_TIME 0
+#endif
+#ifndef AUTO_CAL_TIME
+#define AUTO_CAL_TIME 3
+#endif
+
+/* register defines -------------------------------------------------------- */
+#define DRV2605L_BASE_ADDRESS       0x5A		/* DRV2605L Base address */
+#define DRV_STATUS                  0x00
+#define DRV_MODE                    0x01
+#define DRV_RTP_INPUT               0x02
+#define DRV_LIB_SELECTION           0x03
+#define DRV_WAVEFORM_SEQ_1          0x04
+#define DRV_WAVEFORM_SEQ_2          0x05
+#define DRV_WAVEFORM_SEQ_3          0x06
+#define DRV_WAVEFORM_SEQ_4          0x07
+#define DRV_WAVEFORM_SEQ_5          0x08
+#define DRV_WAVEFORM_SEQ_6          0x09
+#define DRV_WAVEFORM_SEQ_7          0x0A
+#define DRV_WAVEFORM_SEQ_8          0x0B
+#define DRV_GO                      0x0C
+#define DRV_OVERDRIVE_TIME_OFFSET   0x0D
+#define DRV_SUSTAIN_TIME_OFFSET_P   0x0E
+#define DRV_SUSTAIN_TIME_OFFSET_N   0x0F
+#define DRV_BRAKE_TIME_OFFSET       0x10
+#define DRV_AUDIO_2_VIBE_CTRL       0x11
+#define DRV_AUDIO_2_VIBE_MIN_IN     0x12
+#define DRV_AUDIO_2_VIBE_MAX_IN     0x13
+#define DRV_AUDIO_2_VIBE_MIN_OUTDRV	0x14
+#define DRV_AUDIO_2_VIBE_MAX_OUTDRV	0x15
+#define DRV_RATED_VOLT              0x16
+#define DRV_OVERDRIVE_CLAMP_VOLT    0x17
+#define DRV_AUTO_CALIB_COMP_RESULT  0x18 
+#define DRV_AUTO_CALIB_BEMF_RESULT  0x19
+#define DRV_FEEDBACK_CTRL           0x1A
+#define DRV_CTRL_1                  0x1B
+#define DRV_CTRL_2                  0x1C
+#define DRV_CTRL_3                  0x1D
+#define DRV_CTRL_4                  0x1E
+#define DRV_CTRL_5                  0x1F
+#define DRV_OPEN_LOOP_PERIOD        0x20
+#define DRV_VBAT_VOLT_MONITOR       0x21
+#define DRV_LRA_RESONANCE_PERIOD    0x22
+
+void DRV_init(void);
+void DRV_write(const uint8_t drv_register, const uint8_t settings);
+uint8_t DRV_read(const uint8_t regaddress);
+void DRV_pulse(const uint8_t sequence);
+
+
+typedef enum DRV_EFFECT{
+  clear_sequence      = 0,
+  strong_click 		    = 1,
+  strong_click_60 		= 2,
+  strong_click_30 		= 3,
+  sharp_click 		    = 4,
+  sharp_click_60      = 5,
+  sharp_click_30      = 6,
+  soft_bump           = 7,
+  soft_bump_60        = 8,
+  soft_bump_30        = 9,
+  dbl_click           = 10,
+  dbl_click_60        = 11,
+  trp_click           = 12,
+  soft_fuzz           = 13,
+  strong_buzz         = 14,
+  alert_750ms         = 15,
+  alert_1000ms        = 16,
+  strong_click1       = 17,
+  strong_click2_80    = 18,
+  strong_click3_60    = 19,
+  strong_click4_30    = 20,
+  medium_click1       = 21,
+  medium_click2_80    = 22,
+  medium_click3_60    = 23,
+  sharp_tick1         = 24,
+  sharp_tick2_80      = 25,
+  sharp_tick3_60      = 26,
+  sh_dblclick_str     = 27,
+  sh_dblclick_str_80  = 28,
+  sh_dblclick_str_60  = 29,
+  sh_dblclick_str_30  = 30,
+  sh_dblclick_med     = 31,
+  sh_dblclick_med_80  = 32,
+  sh_dblclick_med_60  = 33,
+  sh_dblsharp_tick    = 34,
+  sh_dblsharp_tick_80 = 35,
+  sh_dblsharp_tick_60 = 36,
+  lg_dblclick_str     = 37,
+  lg_dblclick_str_80  = 38,
+  lg_dblclick_str_60  = 39,
+  lg_dblclick_str_30  = 40,
+  lg_dblclick_med     = 41,
+  lg_dblclick_med_80  = 42,
+  lg_dblclick_med_60  = 43,
+  lg_dblsharp_tick    = 44,
+  lg_dblsharp_tick_80 = 45,
+  lg_dblsharp_tick_60 = 46,
+  buzz 					= 47,
+  buzz_80				= 48,
+  buzz_60				= 49,
+  buzz_40				= 50,
+  buzz_20				= 51,
+  pulsing_strong      = 52,
+  pulsing_strong_80   = 53,
+  pulsing_medium      = 54,
+  pulsing_medium_80   = 55,
+  pulsing_sharp       = 56,
+  pulsing_sharp_80    = 57,
+  transition_click		= 58,
+  transition_click_80 = 59,
+  transition_click_60	= 60,
+  transition_click_40	= 61,
+  transition_click_20	= 62,
+  transition_click_10	= 63,
+  transition_hum      = 64,
+  transition_hum_80   = 65,
+  transition_hum_60   = 66,
+  transition_hum_40   = 67,
+  transition_hum_20   = 68,
+  transition_hum_10   = 69,
+  transition_rampdown_long_smooth1  = 70,
+  transition_rampdown_long_smooth2  = 71,
+  transition_rampdown_med_smooth1   = 72,
+  transition_rampdown_med_smooth2   = 73,
+  transition_rampdown_short_smooth1 = 74,
+  transition_rampdown_short_smooth2 = 75,
+  transition_rampdown_long_sharp1   = 76,
+  transition_rampdown_long_sharp2   = 77,
+  transition_rampdown_med_sharp1    = 78,
+  transition_rampdown_med_sharp2    = 79,
+  transition_rampdown_short_sharp1  = 80,
+  transition_rampdown_short_sharp2  = 81,
+  transition_rampup_long_smooth1    = 82,
+  transition_rampup_long_smooth2    = 83,
+  transition_rampup_med_smooth1     = 84,
+  transition_rampup_med_smooth2     = 85,
+  transition_rampup_short_smooth1   = 86,
+  transition_rampup_short_smooth2   = 87,
+  transition_rampup_long_sharp1     = 88,
+  transition_rampup_long_sharp2     = 89,
+  transition_rampup_med_sharp1      = 90,
+  transition_rampup_med_sharp2      = 91,
+  transition_rampup_short_sharp1    = 92,
+  transition_rampup_short_sharp2    = 93,
+  transition_rampdown_long_smooth1_50  = 94,
+  transition_rampdown_long_smooth2_50  = 95,
+  transition_rampdown_med_smooth1_50   = 96,
+  transition_rampdown_med_smooth2_50   = 97,
+  transition_rampdown_short_smooth1_50 = 98,
+  transition_rampdown_short_smooth2_50 = 99,
+  transition_rampdown_long_sharp1_50   = 100,
+  transition_rampdown_long_sharp2_50   = 101,
+  transition_rampdown_med_sharp1_50    = 102,
+  transition_rampdown_med_sharp2_50    = 103,
+  transition_rampdown_short_sharp1_50  = 104,
+  transition_rampdown_short_sharp2_50  = 105,
+  transition_rampup_long_smooth1_50    = 106,
+  transition_rampup_long_smooth2_50    = 107,
+  transition_rampup_med_smooth1_50     = 108,
+  transition_rampup_med_smooth2_50     = 109,
+  transition_rampup_short_smooth1_50   = 110,
+  transition_rampup_short_smooth2_50   = 111,
+  transition_rampup_long_sharp1_50     = 112,
+  transition_rampup_long_sharp2_50     = 113,
+  transition_rampup_med_sharp1_50      = 114,
+  transition_rampup_med_sharp2_50      = 115,
+  transition_rampup_short_sharp1_50    = 116,
+  transition_rampup_short_sharp2_50    = 117,
+  long_buzz_for_programmatic_stopping  = 118,
+  smooth_hum1_50 = 119,
+  smooth_hum2_40 = 120,
+  smooth_hum3_30 = 121,
+  smooth_hum4_20 = 122,
+  smooth_hum5_10 = 123,
+} DRV_EFFECT;
+
+/* Register bit array unions */
+
+typedef union DRVREG_STATUS { /* register 0x00 */
+  uint8_t Byte;
+  struct {
+    uint8_t OC_DETECT   :1; /* set to 1 when overcurrent event is detected */
+    uint8_t OVER_TEMP   :1; /* set to 1 when device exceeds temp threshold */
+    uint8_t FB_STS      :1; /* set to 1 when feedback controller has timed out */
+    /* auto-calibration routine and diagnostic result
+     * result  |  auto-calibation  |      diagnostic       |
+     *   0     |      passed       | actuator func normal  |
+     *   1     |      failed       | actuator func fault*  |
+     * * actuator is not present or is shorted, timing out, or giving out–of-range back-EMF */
+    uint8_t DIAG_RESULT :1;
+    uint8_t             :1;
+    uint8_t DEVICE_ID   :3; /* Device IDs 3: DRV2605  4: DRV2604  5: DRV2604L  6: DRV2605L */
+  } Bits;
+} DRVREG_STATUS;
+
+typedef union DRVREG_MODE { /* register 0x01 */
+  uint8_t Byte;
+  struct {
+    uint8_t MODE        :3; /* Mode setting */
+    uint8_t             :3;
+    uint8_t STANDBY     :1; /* 0:standby 1:ready */
+  } Bits;
+} DRVREG_MODE;
+
+typedef union DRVREG_WAIT {
+  uint8_t Byte;
+  struct {
+    uint8_t WAIT_MODE   :1; /* Set to 1 to interpret as wait for next 7 bits x10ms */
+    uint8_t WAIT_TIME   :7;
+  } Bits;
+} DRVREG_WAIT;
+
+typedef union DRVREG_FBR{ /* register 0x1A */
+  uint8_t Byte;
+  struct {
+    uint8_t BEMF_GAIN    :2;
+    uint8_t LOOP_GAIN    :2;
+    uint8_t BRAKE_FACTOR :3;
+    uint8_t ERM_LRA      :1;
+  } Bits;
+} DRVREG_FBR;
+
+typedef union DRVREG_CTRL1{ /* register 0x1B */
+  uint8_t Byte;
+  struct {
+    uint8_t C1_DRIVE_TIME    :5;
+    uint8_t C1_AC_COUPLE     :1;
+    uint8_t                  :1;
+    uint8_t C1_STARTUP_BOOST :1;
+  } Bits;
+} DRVREG_CTRL1;
+
+typedef union DRVREG_CTRL2{ /* register 0x1C */
+  uint8_t Byte;
+  struct {
+    uint8_t C2_IDISS_TIME    :2;
+    uint8_t C2_BLANKING_TIME :2;
+    uint8_t C2_SAMPLE_TIME   :2;
+    uint8_t C2_BRAKE_STAB    :1;
+    uint8_t C2_BIDIR_INPUT   :1;
+  } Bits;
+} DRVREG_CTRL2;
+
+typedef union DRVREG_CTRL3{ /* register 0x1D */
+  uint8_t Byte;
+  struct {
+    uint8_t C3_LRA_OPEN_LOOP   :1;
+    uint8_t C3_N_PWM_ANALOG    :1;
+    uint8_t C3_LRA_DRIVE_MODE  :1;
+    uint8_t C3_DATA_FORMAT_RTO :1;
+    uint8_t C3_SUPPLY_COMP_DIS :1;
+    uint8_t C3_ERM_OPEN_LOOP   :1;
+    uint8_t C3_NG_THRESH       :2;
+  } Bits;
+} DRVREG_CTRL3;
+
+typedef union DRVREG_CTRL4{ /* register 0x1E */
+  uint8_t Byte;
+  struct {
+    uint8_t C4_OTP_PROGRAM     :1;
+    uint8_t                    :1;
+    uint8_t C4_OTP_STATUS      :1;
+    uint8_t                    :1;
+    uint8_t C4_AUTO_CAL_TIME   :2;
+    uint8_t C4_ZC_DET_TIME     :2;
+  } Bits;
+} DRVREG_CTRL4;
+
+typedef union DRVREG_CTRL5{ /* register 0x1F */
+  uint8_t Byte;
+  struct {
+    uint8_t C5_IDISS_TIME         :2;
+    uint8_t C5_BLANKING_TIME      :2;
+    uint8_t C5_PLAYBACK_INTERVAL  :1;
+    uint8_t C5_LRA_AUTO_OPEN_LOOP :1;
+    uint8_t C5_AUTO_OL_CNT        :2;
+  } Bits;
+} DRVREG_CTRL5;

drivers/issi/is31fl3731-simple.c

@@ -0,0 +1,246 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "is31fl3731-simple.h"
+#include "i2c_master.h"
+#include "progmem.h"
+#include "print.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define ISSI_ADDR_DEFAULT 0x74
+
+#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00
+#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
+#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+
+#define ISSI_CONF_PICTUREMODE 0x00
+#define ISSI_CONF_AUTOFRAMEMODE 0x04
+#define ISSI_CONF_AUDIOMODE 0x08
+
+#define ISSI_REG_PICTUREFRAME  0x01
+
+#define ISSI_REG_SHUTDOWN 0x0A
+#define ISSI_REG_AUDIOSYNC 0x06
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[LED_DRIVER_COUNT][144];
+bool g_pwm_buffer_update_required = false;
+
+/* There's probably a better way to init this... */
+#if LED_DRIVER_COUNT == 1
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
+#elif LED_DRIVER_COUNT == 2
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
+#elif LED_DRIVER_COUNT == 3
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
+#elif LED_DRIVER_COUNT == 4
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
+#endif
+bool g_led_control_registers_update_required = false;
+
+// This is the bit pattern in the LED control registers
+// (for matrix A, add one to register for matrix B)
+//
+//  reg -  b7  b6  b5  b4  b3  b2  b1  b0
+// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
+// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
+// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
+// 0x06 -  - , - , - , - , - ,B02,B01,B00
+// 0x08 -  - , - , - , - , - , - , - , -
+// 0x0A - B17,B16,B15, - , - , - , - , -
+// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
+// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
+// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
+
+
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+    #if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+              break;
+            }
+        }
+    #else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+    #endif
+}
+
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
+    // assumes bank is already selected
+
+    // transmit PWM registers in 9 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for (int i = 0; i < 144; i += 16) {
+        // set the first register, e.g. 0x24, 0x34, 0x44, etc.
+        g_twi_transfer_buffer[0] = 0x24 + i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
+        for (int j = 0; j < 16; j++) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3731_init(uint8_t addr) {
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, first enable software shutdown,
+    // then set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // select "function register" bank
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+
+    // enable software shutdown
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
+    // this delay was copied from other drivers, might not be needed
+    wait_ms(10);
+
+    // picture mode
+    IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+    // display frame 0
+    IS31FL3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
+    // audio sync off
+    IS31FL3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
+
+    // select bank 0
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+
+    // turn off all LEDs in the LED control register
+    for (int i = 0x00; i <= 0x11; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // turn off all LEDs in the blink control register (not really needed)
+    for (int i = 0x12; i <= 0x23; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // set PWM on all LEDs to 0
+    for (int i = 0x24; i <= 0xB3; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // select "function register" bank
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+
+    // disable software shutdown
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
+
+    // select bank 0 and leave it selected.
+    // most usage after initialization is just writing PWM buffers in bank 0
+    // as there's not much point in double-buffering
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+
+}
+
+void IS31FL3731_set_value(int index, uint8_t value) {
+    if (index >= 0 && index < LED_DRIVER_LED_COUNT) {
+        is31_led led = g_is31_leds[index];
+
+        // Subtract 0x24 to get the second index of g_pwm_buffer
+        g_pwm_buffer[led.driver][led.v - 0x24] = value;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3731_set_value_all(uint8_t value) {
+    for (int i = 0; i < LED_DRIVER_LED_COUNT; i++) {
+        IS31FL3731_set_value(i, value);
+    }
+}
+
+void IS31FL3731_set_led_control_register(uint8_t index, bool value) {
+  is31_led led = g_is31_leds[index];
+
+  uint8_t control_register = (led.v - 0x24) / 8;
+  uint8_t bit_value = (led.v - 0x24) % 8;
+
+    if (value) {
+        g_led_control_registers[led.driver][control_register] |= (1 << bit_value);
+    } else {
+        g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value);
+    }
+
+    g_led_control_registers_update_required = true;
+}
+
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required) {
+        IS31FL3731_write_pwm_buffer(addr, g_pwm_buffer[index]);
+        g_pwm_buffer_update_required = false;
+    }
+}
+
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_led_control_registers_update_required) {
+        for (int i=0; i<18; i++) {
+            IS31FL3731_write_register(addr, i, g_led_control_registers[index][i]);
+        }
+    }
+}

drivers/issi/is31fl3731-simple.h

@@ -0,0 +1,210 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3731_DRIVER_H
+#define IS31FL3731_DRIVER_H
+
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t v;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[LED_DRIVER_LED_COUNT];
+
+void IS31FL3731_init(uint8_t addr);
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3731_set_value(int index, uint8_t value);
+void IS31FL3731_set_value_all(uint8_t value);
+
+void IS31FL3731_set_led_control_register(uint8_t index, bool value);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define C1_1  0x24
+#define C1_2  0x25
+#define C1_3  0x26
+#define C1_4  0x27
+#define C1_5  0x28
+#define C1_6  0x29
+#define C1_7  0x2A
+#define C1_8  0x2B
+
+#define C1_9  0x2C
+#define C1_10 0x2D
+#define C1_11 0x2E
+#define C1_12 0x2F
+#define C1_13 0x30
+#define C1_14 0x31
+#define C1_15 0x32
+#define C1_16 0x33
+
+#define C2_1  0x34
+#define C2_2  0x35
+#define C2_3  0x36
+#define C2_4  0x37
+#define C2_5  0x38
+#define C2_6  0x39
+#define C2_7  0x3A
+#define C2_8  0x3B
+
+#define C2_9  0x3C
+#define C2_10 0x3D
+#define C2_11 0x3E
+#define C2_12 0x3F
+#define C2_13 0x40
+#define C2_14 0x41
+#define C2_15 0x42
+#define C2_16 0x43
+
+#define C3_1  0x44
+#define C3_2  0x45
+#define C3_3  0x46
+#define C3_4  0x47
+#define C3_5  0x48
+#define C3_6  0x49
+#define C3_7  0x4A
+#define C3_8  0x4B
+
+#define C3_9  0x4C
+#define C3_10 0x4D
+#define C3_11 0x4E
+#define C3_12 0x4F
+#define C3_13 0x50
+#define C3_14 0x51
+#define C3_15 0x52
+#define C3_16 0x53
+
+#define C4_1  0x54
+#define C4_2  0x55
+#define C4_3  0x56
+#define C4_4  0x57
+#define C4_5  0x58
+#define C4_6  0x59
+#define C4_7  0x5A
+#define C4_8  0x5B
+
+#define C4_9  0x5C
+#define C4_10 0x5D
+#define C4_11 0x5E
+#define C4_12 0x5F
+#define C4_13 0x60
+#define C4_14 0x61
+#define C4_15 0x62
+#define C4_16 0x63
+
+#define C5_1  0x64
+#define C5_2  0x65
+#define C5_3  0x66
+#define C5_4  0x67
+#define C5_5  0x68
+#define C5_6  0x69
+#define C5_7  0x6A
+#define C5_8  0x6B
+
+#define C5_9  0x6C
+#define C5_10 0x6D
+#define C5_11 0x6E
+#define C5_12 0x6F
+#define C5_13 0x70
+#define C5_14 0x71
+#define C5_15 0x72
+#define C5_16 0x73
+
+#define C6_1  0x74
+#define C6_2  0x75
+#define C6_3  0x76
+#define C6_4  0x77
+#define C6_5  0x78
+#define C6_6  0x79
+#define C6_7  0x7A
+#define C6_8  0x7B
+
+#define C6_9  0x7C
+#define C6_10 0x7D
+#define C6_11 0x7E
+#define C6_12 0x7F
+#define C6_13 0x80
+#define C6_14 0x81
+#define C6_15 0x82
+#define C6_16 0x83
+
+#define C7_1  0x84
+#define C7_2  0x85
+#define C7_3  0x86
+#define C7_4  0x87
+#define C7_5  0x88
+#define C7_6  0x89
+#define C7_7  0x8A
+#define C7_8  0x8B
+
+#define C7_9  0x8C
+#define C7_10 0x8D
+#define C7_11 0x8E
+#define C7_12 0x8F
+#define C7_13 0x90
+#define C7_14 0x91
+#define C7_15 0x92
+#define C7_16 0x93
+
+#define C8_1  0x94
+#define C8_2  0x95
+#define C8_3  0x96
+#define C8_4  0x97
+#define C8_5  0x98
+#define C8_6  0x99
+#define C8_7  0x9A
+#define C8_8  0x9B
+
+#define C8_9  0x9C
+#define C8_10 0x9D
+#define C8_11 0x9E
+#define C8_12 0x9F
+#define C8_13 0xA0
+#define C8_14 0xA1
+#define C8_15 0xA2
+#define C8_16 0xA3
+
+#define C9_1  0xA4
+#define C9_2  0xA5
+#define C9_3  0xA6
+#define C9_4  0xA7
+#define C9_5  0xA8
+#define C9_6  0xA9
+#define C9_7  0xAA
+#define C9_8  0xAB
+
+#define C9_9  0xAC
+#define C9_10 0xAD
+#define C9_11 0xAE
+#define C9_12 0xAF
+#define C9_13 0xB0
+#define C9_14 0xB1
+#define C9_15 0xB2
+#define C9_16 0xB3
+
+
+#endif // IS31FL3731_DRIVER_H

drivers/issi/is31fl3733.c

@@ -24,10 +24,10 @@
 #include "wait.h"
 #endif
 
+#include "is31fl3733.h"
 #include <string.h>
 #include "i2c_master.h"
 #include "progmem.h"
-#include "rgb_matrix.h"
 
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)

drivers/qwiic/micro_oled.c

@@ -0,0 +1,691 @@
+/* Jim Lindblom @ SparkFun Electronics
+ * October 26, 2014
+ * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED
+ *
+ * Modified by:
+ * Emil Varughese @ Edwin Robotics Pvt. Ltd.
+ * July 27, 2015
+ * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+ *
+ * This code was heavily based around the MicroView library, written by GeekAmmo
+ * (https://github.com/geekammo/MicroView-Arduino-Library).
+ *
+ * Adapted for QMK by:
+ * Jack Humbert <jack.humb@gmail.com>
+ * October 11, 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "micro_oled.h"
+#include <print.h>
+#include <stdlib.h>
+#include "util/font5x7.h"
+#include "util/font8x16.h"
+#include "string.h"
+
+#define TOTALFONTS 2
+const unsigned char * fonts_pointer[]= { font5x7, font8x16 };
+
+uint8_t foreColor,drawMode,fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY;
+uint16_t fontMapWidth;
+
+#define _BV(x) (1 << (x))
+#define swap(a, b) { uint8_t t = a; a = b; b = t; }
+
+uint8_t micro_oled_transfer_buffer[20];
+static uint8_t micro_oled_screen_current[LCDWIDTH*LCDWIDTH/8] = { 0 };
+
+/* LCD Memory organised in 64 horizontal pixel and 6 rows of byte
+   B  B .............B  -----
+   y  y .............y        \
+   t  t .............t         \
+   e  e .............e          \
+   0  1 .............63          \
+                                  \
+   D0 D0.............D0            \
+   D1 D1.............D1            / ROW 0
+   D2 D2.............D2           /
+   D3 D3.............D3          /
+   D4 D4.............D4         /
+   D5 D5.............D5        /
+   D6 D6.............D6       /
+   D7 D7.............D7  ----
+  */
+
+#if LCDWIDTH == 64
+  #if LCDWIDTH == 48
+static uint8_t micro_oled_screen_buffer[] = {
+// QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php
+//64x48 image
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
+0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
+0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60,
+0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE,
+0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF,
+0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7,
+0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06,
+0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00
+};
+  #endif
+#elif LCDWIDTH == 128
+  #if LCDHEIGHT == 32
+     static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {
+//128x32 qmk image
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xFC, 0xFC,
+0xE0, 0xF0, 0xFC, 0xE0, 0xE0, 0xFC, 0xE0, 0xE0, 0xFC, 0xFC,
+0xE0, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xF0, 0x10, 0x10, 0x30, 0xE0, 0x00, 0x00,
+0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00,
+0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x80,
+0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00,
+0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
+0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xB2, 0xB2, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0x03,
+0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF,
+0xFF, 0xB7, 0xB2, 0xB2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x1F, 0x02, 0x02, 0x03, 0x01, 0x00, 0x06, 0x1F, 0x10,
+0x10, 0x10, 0x1F, 0x06, 0x00, 0x03, 0x1E, 0x18, 0x0F, 0x01,
+0x0F, 0x18, 0x1E, 0x01, 0x00, 0x0F, 0x1F, 0x12, 0x02, 0x12,
+0x13, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x0E, 0x1F, 0x12,
+0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x1F,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x48, 0x4D, 0x4D, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFE, 0xF8, 0xF9, 0xF3, 0xF3, 0xC0, 0x80, 0xF3,
+0xF3, 0xF3, 0xF9, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xED,
+0x4D, 0x4D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0xC0, 0x00, 0x70, 0xC0,
+0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0C,
+0x04, 0x04, 0x04, 0x04, 0x1C, 0xF0, 0x00, 0x00, 0xFC, 0x0C,
+0x38, 0xE0, 0x00, 0x00, 0xC0, 0x38, 0x0C, 0xFC, 0x00, 0x00,
+0xFC, 0xFC, 0x60, 0x90, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x3F,
+0x3F, 0x07, 0x3F, 0x3F, 0x07, 0x0F, 0x3F, 0x07, 0x07, 0x3F,
+0x07, 0x07, 0x3F, 0x3F, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
+0x06, 0x04, 0x04, 0x07, 0x01, 0x00, 0x00, 0x13, 0x1E, 0x03,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x04, 0x04,
+0x04, 0x04, 0x07, 0x0D, 0x08, 0x00, 0x07, 0x00, 0x00, 0x01,
+0x07, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x07,
+0x00, 0x01, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00
+    };
+  #elif LCDHEIGHT == 64
+    static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0,
+0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00,
+0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xC0, 0xC0, 0xC0, 0xC0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFF,
+0x7F, 0x7E, 0xFE, 0xFF, 0xFF, 0xFE, 0xFE, 0x7F, 0x7F, 0xFE,
+0xFE, 0xFF, 0xFF, 0xFE, 0x7E, 0x7F, 0xFF, 0xFE, 0xFE, 0xFC,
+0xFC, 0xF8, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x88, 0x88, 0x88, 0xDD, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xDD, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFE, 0xF8, 0xF0, 0xF3, 0xF3, 0xE7, 0xE7, 0x00,
+0x00, 0xE7, 0xE7, 0xF3, 0xF3, 0xF0, 0xF8, 0xFE, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x99, 0x99, 0x99, 0x99, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0F, 0x1F, 0x3F,
+0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F,
+0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF,
+0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x01, 0x01, 0x01, 0x01, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x03, 0x01, 0x00,
+0x80, 0x03, 0x03, 0x00, 0x00, 0x01, 0x03, 0x00, 0x80, 0x01,
+0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xFF, 0x11, 0x11, 0x11, 0x0E, 0x00, 0x70,
+0x88, 0x04, 0x04, 0x04, 0xF8, 0x00, 0x00, 0x3C, 0xE0, 0xC0,
+0x38, 0x1C, 0xE0, 0x80, 0x70, 0x0C, 0x00, 0xF8, 0xAC, 0x24,
+0x24, 0x3C, 0x30, 0x00, 0x00, 0xFC, 0x0C, 0x04, 0x00, 0xF8,
+0xAC, 0x24, 0x24, 0x2C, 0x30, 0x00, 0x70, 0xDC, 0x04, 0x04,
+0x88, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+0x8C, 0x04, 0x04, 0xF8, 0x00, 0x04, 0x3C, 0xE0, 0x80, 0xF0,
+0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x83, 0x01, 0x01,
+0x01, 0x81, 0xFE, 0x3C, 0x00, 0x00, 0xFF, 0x03, 0x0E, 0x70,
+0xC0, 0xE0, 0x38, 0x06, 0x03, 0xFF, 0x00, 0x00, 0xFF, 0x18,
+0x38, 0x66, 0xC3, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
+0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x01,
+0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x04, 0x03,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x03, 0x02, 0x00, 0x01, 0x00, 0x00,
+0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+//TODO: generate bitmap of QMK logo here
+  #endif
+#else
+//catchall for custom screen szies
+    static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {0};
+#endif
+
+
+
+void micro_oled_init(void) {
+  i2c_init();
+  i2c_start(I2C_ADDRESS_SA0_1);
+
+  // Display Init sequence for 64x48 OLED module
+  send_command(DISPLAYOFF);      // 0xAE
+
+  send_command(SETDISPLAYCLOCKDIV);  // 0xD5
+  send_command(0x80);          // the suggested ratio 0x80
+
+  send_command(SETMULTIPLEX);      // 0xA8
+  send_command(LCDHEIGHT - 1);
+
+  send_command(SETDISPLAYOFFSET);    // 0xD3
+  send_command(0x00);         // no offset
+
+  send_command(SETSTARTLINE | 0x00);  // line #0
+
+  send_command(CHARGEPUMP);      // enable charge pump
+  send_command(0x14);
+
+  send_command(NORMALDISPLAY);     // 0xA6
+  send_command(DISPLAYALLONRESUME);  // 0xA4
+
+//display at regular orientation
+  send_command(SEGREMAP | 0x1);
+  send_command(COMSCANDEC);
+
+//rotate display 180
+#ifdef micro_oled_rotate_180
+  send_command(SEGREMAP);
+  send_command(COMSCANINC);
+#endif
+
+  send_command(MEMORYMODE);
+  send_command(0x10);
+
+  send_command(SETCOMPINS);      // 0xDA
+if (LCDHEIGHT > 32) {
+  send_command(0x12);
+} else {
+  send_command(0x02);
+}
+  send_command(SETCONTRAST);     // 0x81
+  send_command(0x8F);
+
+  send_command(SETPRECHARGE);      // 0xd9
+  send_command(0xF1);
+
+  send_command(SETVCOMDESELECT);     // 0xDB
+  send_command(0x40);
+
+  send_command(DISPLAYON);       //--turn on oled panel
+  clear_screen();           // Erase hardware memory inside the OLED controller to avoid random data in memory.
+  send_buffer();
+}
+
+void send_command(uint8_t command) {
+  micro_oled_transfer_buffer[0] = I2C_COMMAND;
+  micro_oled_transfer_buffer[1] = command;
+  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
+}
+
+void send_data(uint8_t data) {
+  micro_oled_transfer_buffer[0] = I2C_DATA;
+  micro_oled_transfer_buffer[1] = data;
+  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
+}
+
+/** \brief Set SSD1306 page address.
+    Send page address command and address to the SSD1306 OLED controller.
+*/
+void set_page_address(uint8_t address) {
+  address = (0xB0 | address);
+  send_command(address);
+}
+
+/** \brief Set SSD1306 column address.
+    Send column address command and address to the SSD1306 OLED controller.
+*/
+void set_column_address(uint8_t address) {
+  send_command( ( 0x10 | (address >> 4) ) + ((128 - LCDWIDTH) >> 8) );
+  send_command( 0x0F & address );
+}
+
+/** \brief Clear SSD1306's memory.
+    To clear GDRAM inside the LCD controller.
+*/
+void clear_screen(void) {
+  for (int i=0;i<8; i++) {
+    set_page_address(i);
+    set_column_address(0);
+    for (int j=0; j<0x80; j++) {
+      send_data(0);
+    }
+  }
+}
+
+/** \brief Clear SSD1306's memory.
+    To clear GDRAM inside the LCD controller.
+*/
+void clear_buffer(void) {
+//384
+  memset(micro_oled_screen_buffer, 0, LCDWIDTH*LCDWIDTH/8);
+}
+
+/** \brief Invert display.
+    The PIXEL_ON color of the display will turn to PIXEL_OFF and the PIXEL_OFF will turn to PIXEL_ON.
+*/
+void invert_screen(bool invert) {
+  if (invert) {
+    send_command(INVERTDISPLAY);
+  } else {
+    send_command(NORMALDISPLAY);
+  }
+}
+
+/** \brief Set contrast.
+    OLED contract value from 0 to 255. Note: Contrast level is not very obvious.
+*/
+void set_contrast(uint8_t contrast) {
+  send_command(SETCONTRAST);     // 0x81
+  send_command(contrast);
+}
+
+/** \brief Transfer display buffer.
+  Sends the updated buffer to the controller - the current status is checked before to save i2c exectution time
+*/
+void send_buffer(void) {
+  uint8_t i, j;
+
+  uint8_t page_addr = 0xFF;
+  for (i = 0; i < LCDHEIGHT/8; i++) {
+    uint8_t col_addr = 0xFF;
+    for (j = 0; j < LCDWIDTH; j++) {
+      if (micro_oled_screen_buffer[i*LCDWIDTH+j] != micro_oled_screen_current[i*LCDWIDTH+j]) {
+        if (page_addr != i) {
+          set_page_address(i);
+        }
+        if (col_addr != j) {
+          set_column_address(j);
+        }
+        send_data(micro_oled_screen_buffer[i*LCDWIDTH+j]);
+        micro_oled_screen_current[i*LCDWIDTH+j] = micro_oled_screen_buffer[i*LCDWIDTH+j];
+        col_addr = j + 1;
+      }
+    }
+  }
+}
+
+/** \brief Draw pixel with color and mode.
+  Draw color pixel in the screen buffer's x,y position with NORM or XOR draw mode.
+*/
+void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode) {
+  if ((x<0) ||  (x>=LCDWIDTH) || (y<0) || (y>=LCDHEIGHT))
+    return;
+
+  if (mode == XOR) {
+    if (color == PIXEL_ON)
+      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] ^= _BV((y%8));
+  } else {
+    if (color == PIXEL_ON)
+      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] |= _BV((y%8));
+    else
+      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] &= ~_BV((y%8));
+  }
+}
+
+/** \brief Draw line with color and mode.
+Draw line using color and mode from x0,y0 to x1,y1 of the screen buffer.
+*/
+void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode) {
+  uint8_t steep = abs(y1 - y0) > abs(x1 - x0);
+  if (steep) {
+    swap(x0, y0);
+    swap(x1, y1);
+  }
+
+  if (x0 > x1) {
+    swap(x0, x1);
+    swap(y0, y1);
+  }
+
+  uint8_t dx, dy;
+  dx = x1 - x0;
+  dy = abs(y1 - y0);
+
+  int8_t err = dx / 2;
+  int8_t ystep;
+
+  if (y0 < y1) {
+    ystep = 1;
+  } else {
+    ystep = -1;}
+
+  for (; x0<x1; x0++) {
+    if (steep) {
+      draw_pixel(y0, x0, color, mode);
+    } else {
+      draw_pixel(x0, y0, color, mode);
+    }
+    err -= dy;
+    if (err < 0) {
+      y0 += ystep;
+      err += dx;
+    }
+  }
+}
+
+/** \brief Draw horizontal line with color and mode.
+Draw horizontal line using color and mode from x,y to x+width,y of the screen buffer.
+*/
+void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) {
+  draw_line(x,y,x+width,y,color,mode);
+}
+
+/** \brief Draw vertical line.
+Draw vertical line using current fore color and current draw mode from x,y to x,y+height of the screen buffer.
+*/
+void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) {
+  draw_line(x,y,x,y+height,color,mode);
+}
+
+/** \brief Draw rectangle with color and mode.
+Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  uint8_t tempHeight;
+
+  draw_line_hori(x,y, width, color, mode);
+  draw_line_hori(x,y+height-1, width, color, mode);
+
+  tempHeight=height-2;
+
+  // skip drawing vertical lines to avoid overlapping of pixel that will
+  // affect XOR plot if no pixel in between horizontal lines
+  if (tempHeight<1) return;
+
+  draw_line_vert(x,y+1, tempHeight, color, mode);
+  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
+}
+
+/** \brief Draw rectangle with color and mode.
+Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  uint8_t tempHeight;
+
+  draw_line_hori(x+1,y, width-2, color, mode);
+  draw_line_hori(x+1,y+height-1, width-2, color, mode);
+
+  tempHeight=height-2;
+
+  // skip drawing vertical lines to avoid overlapping of pixel that will
+  // affect XOR plot if no pixel in between horizontal lines
+  if (tempHeight<1) return;
+
+  draw_line_vert(x,y+1, tempHeight, color, mode);
+  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
+}
+
+/** \brief Draw filled rectangle with color and mode.
+Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
+  for (int i=x; i<x+width;i++) {
+    draw_line_vert(i,y, height, color, mode);
+  }
+}
+
+/** \brief Draw filled rectangle with color and mode.
+Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
+  for (int i=x; i<x+width;i++) {
+    if (i == x || i == (x + width - 1))
+      draw_line_vert(i, y+1, height-2, color, mode);
+    else
+      draw_line_vert(i, y, height, color, mode);
+  }
+}
+
+/** \brief Draw character with color and mode.
+  Draw character c using color and draw mode at x,y.
+*/
+void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font) {
+  // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels
+
+  uint8_t rowsToDraw,row, tempC;
+  uint8_t i,j,temp;
+  uint16_t charPerBitmapRow,charColPositionOnBitmap,charRowPositionOnBitmap,charBitmapStartPosition;
+
+  if ((font>=TOTALFONTS) || (font<0))
+    return;
+
+  uint8_t fontType = font;
+  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
+  uint8_t fontHeight = pgm_read_byte(fonts_pointer[fontType]+1);
+  uint8_t fontStartChar = pgm_read_byte(fonts_pointer[fontType]+2);
+  uint8_t fontTotalChar = pgm_read_byte(fonts_pointer[fontType]+3);
+  uint16_t fontMapWidth = (pgm_read_byte(fonts_pointer[fontType]+4)*100)+pgm_read_byte(fonts_pointer[fontType]+5); // two bytes values into integer 16
+
+  if ((c<fontStartChar) || (c>(fontStartChar+fontTotalChar-1)))   // no bitmap for the required c
+    return;
+
+  tempC=c-fontStartChar;
+
+  // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn
+  rowsToDraw=fontHeight/8;  // 8 is LCD's page size, see SSD1306 datasheet
+  if (rowsToDraw<=1) rowsToDraw=1;
+
+  // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw
+  if (rowsToDraw==1) {
+    for  (i=0;i<fontWidth+1;i++) {
+      if (i==fontWidth) // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5
+      temp=0;
+      else
+      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(tempC*fontWidth)+i);
+
+      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
+        if (temp & 0x1) {
+          draw_pixel(x+i, y+j, color,mode);
+        }
+        else {
+          draw_pixel(x+i, y+j, !color,mode);
+        }
+
+        temp >>=1;
+      }
+    }
+    return;
+  }
+
+  // font height over 8 bit
+  // take character "0" ASCII 48 as example
+  charPerBitmapRow = fontMapWidth/fontWidth;  // 256/8 =32 char per row
+  charColPositionOnBitmap = tempC % charPerBitmapRow;  // =16
+  charRowPositionOnBitmap = (int)(tempC/charPerBitmapRow); // =1
+  charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight/8)) + (charColPositionOnBitmap * fontWidth) ;
+
+  // each row on LCD is 8 bit height (see datasheet for explanation)
+  for(row=0;row<rowsToDraw;row++) {
+    for (i=0; i<fontWidth;i++) {
+      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(charBitmapStartPosition+i+(row*fontMapWidth)));
+      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
+        if (temp & 0x1) {
+          draw_pixel(x+i,y+j+(row*8), color, mode);
+        }
+        else {
+          draw_pixel(x+i,y+j+(row*8), !color, mode);
+        }
+        temp >>=1;
+      }
+    }
+  }
+
+}
+
+void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font) {
+
+  if ((font>=TOTALFONTS) || (font<0))
+    return;
+
+  uint8_t fontType = font;
+  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
+
+  uint8_t cur_x = x;
+  for (int i = 0; i < strlen(string); i++) {
+    draw_char(cur_x, y, string[i], color, mode, font);
+    cur_x += fontWidth + 1;
+  }
+
+}

drivers/qwiic/micro_oled.h

@@ -0,0 +1,134 @@
+/* Jim Lindblom @ SparkFun Electronics
+ * October 26, 2014
+ * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED
+ *
+ * Modified by:
+ * Emil Varughese @ Edwin Robotics Pvt. Ltd.
+ * July 27, 2015
+ * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+ *
+ * This code was heavily based around the MicroView library, written by GeekAmmo
+ * (https://github.com/geekammo/MicroView-Arduino-Library).
+ *
+ * Adapted for QMK by:
+ * Jack Humbert <jack.humb@gmail.com>
+ * October 11, 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "qwiic.h"
+
+void micro_oled_init(void);
+
+void send_command(uint8_t command);
+void send_data(uint8_t data);
+void set_page_address(uint8_t address);
+void set_column_address(uint8_t address);
+void clear_screen(void);
+void clear_buffer(void);
+void send_buffer(void);
+void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode);
+void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode);
+void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode);
+void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode);
+void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font);
+void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font);
+
+#define I2C_ADDRESS_SA0_0 0b0111100
+#ifndef I2C_ADDRESS_SA0_1
+#define I2C_ADDRESS_SA0_1 0b0111101
+#endif
+#define I2C_COMMAND 0x00
+#define I2C_DATA 0x40
+#define PIXEL_OFF 0
+#define PIXEL_ON  1
+
+#ifndef LCDWIDTH
+#define LCDWIDTH      64
+#endif
+#ifndef LCDWIDTH
+#define LCDHEIGHT     48
+#endif
+#define FONTHEADERSIZE    6
+
+#define NORM        0
+#define XOR         1
+
+#define PAGE        0
+#define ALL         1
+
+#define WIDGETSTYLE0      0
+#define WIDGETSTYLE1      1
+#define WIDGETSTYLE2      2
+
+#define SETCONTRAST     0x81
+#define DISPLAYALLONRESUME  0xA4
+#define DISPLAYALLON    0xA5
+#define NORMALDISPLAY     0xA6
+#define INVERTDISPLAY     0xA7
+#define DISPLAYOFF      0xAE
+#define DISPLAYON       0xAF
+#define SETDISPLAYOFFSET  0xD3
+#define SETCOMPINS      0xDA
+#define SETVCOMDESELECT   0xDB
+#define SETDISPLAYCLOCKDIV  0xD5
+#define SETPRECHARGE    0xD9
+#define SETMULTIPLEX    0xA8
+#define SETLOWCOLUMN    0x00
+#define SETHIGHCOLUMN     0x10
+#define SETSTARTLINE    0x40
+#define MEMORYMODE      0x20
+#define COMSCANINC      0xC0
+#define COMSCANDEC      0xC8
+#define SEGREMAP      0xA0
+#define CHARGEPUMP      0x8D
+#define EXTERNALVCC     0x01
+#define SWITCHCAPVCC    0x02
+
+// Scroll
+#define ACTIVATESCROLL          0x2F
+#define DEACTIVATESCROLL        0x2E
+#define SETVERTICALSCROLLAREA       0xA3
+#define RIGHTHORIZONTALSCROLL       0x26
+#define LEFT_HORIZONTALSCROLL       0x27
+#define VERTICALRIGHTHORIZONTALSCROLL 0x29
+#define VERTICALLEFTHORIZONTALSCROLL  0x2A
+
+typedef enum CMD {
+  CMD_CLEAR,      //0
+  CMD_INVERT,     //1
+  CMD_CONTRAST,   //2
+  CMD_DISPLAY,    //3
+  CMD_SETCURSOR,    //4
+  CMD_PIXEL,      //5
+  CMD_LINE,     //6
+  CMD_LINEH,      //7
+  CMD_LINEV,      //8
+  CMD_RECT,     //9
+  CMD_RECTFILL,   //10
+  CMD_CIRCLE,     //11
+  CMD_CIRCLEFILL,   //12
+  CMD_DRAWCHAR,   //13
+  CMD_DRAWBITMAP,   //14
+  CMD_GETLCDWIDTH,  //15
+  CMD_GETLCDHEIGHT, //16
+  CMD_SETCOLOR,   //17
+  CMD_SETDRAWMODE   //18
+} commCommand_t;

drivers/qwiic/qwiic.c

@@ -0,0 +1,31 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qwiic.h"
+
+void qwiic_init(void) {
+  #ifdef QWIIC_JOYSTIIC_ENABLE
+    joystiic_init();
+  #endif
+  #ifdef QWIIC_MICRO_OLED_ENABLE
+    micro_oled_init();
+  #endif
+}
+
+void qwiic_task(void) {
+  #ifdef QWIIC_JOYSTIIC_ENABLE
+    joystiic_task();
+  #endif
+}

drivers/qwiic/qwiic.h

@@ -0,0 +1,28 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "i2c_master.h"
+
+#ifdef QWIIC_JOYSTIIC_ENABLE
+  #include "joystiic.h"
+#endif
+#ifdef QWIIC_MICRO_OLED_ENABLE
+  #include "micro_oled.h"
+#endif
+
+void qwiic_init(void);
+void qwiic_task(void);

drivers/qwiic/qwiic.mk

@@ -0,0 +1,18 @@
+ifneq ($(strip $(QWIIC_ENABLE)),)
+  COMMON_VPATH += $(DRIVER_PATH)/qwiic
+  OPT_DEFS += -DQWIIC_ENABLE
+  SRC += qwiic.c
+  ifeq ($(filter "i2c_master.c", $(SRC)),)
+    SRC += i2c_master.c
+  endif
+endif
+
+ifneq ($(filter JOYSTIIC, $(QWIIC_ENABLE)),)
+  OPT_DEFS += -DQWIIC_JOYSTIIC_ENABLE
+  SRC += joystiic.c
+endif
+
+ifneq ($(filter MICRO_OLED, $(QWIIC_ENABLE)),)
+  OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE
+  SRC += micro_oled.c
+endif

drivers/qwiic/util/font5x7.h

@@ -0,0 +1,288 @@
+/******************************************************************************
+font5x7.h
+Definition for small font
+
+This file was imported from the MicroView library, written by GeekAmmo
+(https://github.com/geekammo/MicroView-Arduino-Library), and released under
+the terms of the GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Modified by:
+Emil Varughese @ Edwin Robotics Pvt. Ltd.
+July 27, 2015
+https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+
+******************************************************************************/
+#pragma once
+
+#include "progmem.h"
+
+// Standard ASCII 5x7 font
+static const unsigned char font5x7[] PROGMEM = {
+    // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
+    5,8,0,255,12,75,
+    0x00, 0x00, 0x00, 0x00, 0x00,
+    0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
+    0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
+    0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
+    0x18, 0x3C, 0x7E, 0x3C, 0x18,
+    0x1C, 0x57, 0x7D, 0x57, 0x1C,
+    0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
+    0x00, 0x18, 0x3C, 0x18, 0x00,
+    0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
+    0x00, 0x18, 0x24, 0x18, 0x00,
+    0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
+    0x30, 0x48, 0x3A, 0x06, 0x0E,
+    0x26, 0x29, 0x79, 0x29, 0x26,
+    0x40, 0x7F, 0x05, 0x05, 0x07,
+    0x40, 0x7F, 0x05, 0x25, 0x3F,
+    0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
+    0x7F, 0x3E, 0x1C, 0x1C, 0x08,
+    0x08, 0x1C, 0x1C, 0x3E, 0x7F,
+    0x14, 0x22, 0x7F, 0x22, 0x14,
+    0x5F, 0x5F, 0x00, 0x5F, 0x5F,
+    0x06, 0x09, 0x7F, 0x01, 0x7F,
+    0x00, 0x66, 0x89, 0x95, 0x6A,
+    0x60, 0x60, 0x60, 0x60, 0x60,
+    0x94, 0xA2, 0xFF, 0xA2, 0x94,
+    0x08, 0x04, 0x7E, 0x04, 0x08,
+    0x10, 0x20, 0x7E, 0x20, 0x10,
+    0x08, 0x08, 0x2A, 0x1C, 0x08,
+    0x08, 0x1C, 0x2A, 0x08, 0x08,
+    0x1E, 0x10, 0x10, 0x10, 0x10,
+    0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
+    0x30, 0x38, 0x3E, 0x38, 0x30,
+    0x06, 0x0E, 0x3E, 0x0E, 0x06,
+    0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x5F, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x07, 0x00,
+    0x14, 0x7F, 0x14, 0x7F, 0x14,
+    0x24, 0x2A, 0x7F, 0x2A, 0x12,
+    0x23, 0x13, 0x08, 0x64, 0x62,
+    0x36, 0x49, 0x56, 0x20, 0x50,
+    0x00, 0x08, 0x07, 0x03, 0x00,
+    0x00, 0x1C, 0x22, 0x41, 0x00,
+    0x00, 0x41, 0x22, 0x1C, 0x00,
+    0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
+    0x08, 0x08, 0x3E, 0x08, 0x08,
+    0x00, 0x80, 0x70, 0x30, 0x00,
+    0x08, 0x08, 0x08, 0x08, 0x08,
+    0x00, 0x00, 0x60, 0x60, 0x00,
+    0x20, 0x10, 0x08, 0x04, 0x02,
+    0x3E, 0x51, 0x49, 0x45, 0x3E,
+    0x00, 0x42, 0x7F, 0x40, 0x00,
+    0x72, 0x49, 0x49, 0x49, 0x46,
+    0x21, 0x41, 0x49, 0x4D, 0x33,
+    0x18, 0x14, 0x12, 0x7F, 0x10,
+    0x27, 0x45, 0x45, 0x45, 0x39,
+    0x3C, 0x4A, 0x49, 0x49, 0x31,
+    0x41, 0x21, 0x11, 0x09, 0x07,
+    0x36, 0x49, 0x49, 0x49, 0x36,
+    0x46, 0x49, 0x49, 0x29, 0x1E,
+    0x00, 0x00, 0x14, 0x00, 0x00,
+    0x00, 0x40, 0x34, 0x00, 0x00,
+    0x00, 0x08, 0x14, 0x22, 0x41,
+    0x14, 0x14, 0x14, 0x14, 0x14,
+    0x00, 0x41, 0x22, 0x14, 0x08,
+    0x02, 0x01, 0x59, 0x09, 0x06,
+    0x3E, 0x41, 0x5D, 0x59, 0x4E,
+    0x7C, 0x12, 0x11, 0x12, 0x7C,
+    0x7F, 0x49, 0x49, 0x49, 0x36,
+    0x3E, 0x41, 0x41, 0x41, 0x22,
+    0x7F, 0x41, 0x41, 0x41, 0x3E,
+    0x7F, 0x49, 0x49, 0x49, 0x41,
+    0x7F, 0x09, 0x09, 0x09, 0x01,
+    0x3E, 0x41, 0x41, 0x51, 0x73,
+    0x7F, 0x08, 0x08, 0x08, 0x7F,
+    0x00, 0x41, 0x7F, 0x41, 0x00,
+    0x20, 0x40, 0x41, 0x3F, 0x01,
+    0x7F, 0x08, 0x14, 0x22, 0x41,
+    0x7F, 0x40, 0x40, 0x40, 0x40,
+    0x7F, 0x02, 0x1C, 0x02, 0x7F,
+    0x7F, 0x04, 0x08, 0x10, 0x7F,
+    0x3E, 0x41, 0x41, 0x41, 0x3E,
+    0x7F, 0x09, 0x09, 0x09, 0x06,
+    0x3E, 0x41, 0x51, 0x21, 0x5E,
+    0x7F, 0x09, 0x19, 0x29, 0x46,
+    0x26, 0x49, 0x49, 0x49, 0x32,
+    0x03, 0x01, 0x7F, 0x01, 0x03,
+    0x3F, 0x40, 0x40, 0x40, 0x3F,
+    0x1F, 0x20, 0x40, 0x20, 0x1F,
+    0x3F, 0x40, 0x38, 0x40, 0x3F,
+    0x63, 0x14, 0x08, 0x14, 0x63,
+    0x03, 0x04, 0x78, 0x04, 0x03,
+    0x61, 0x59, 0x49, 0x4D, 0x43,
+    0x00, 0x7F, 0x41, 0x41, 0x41,
+    0x02, 0x04, 0x08, 0x10, 0x20,
+    0x00, 0x41, 0x41, 0x41, 0x7F,
+    0x04, 0x02, 0x01, 0x02, 0x04,
+    0x40, 0x40, 0x40, 0x40, 0x40,
+    0x00, 0x03, 0x07, 0x08, 0x00,
+    0x20, 0x54, 0x54, 0x78, 0x40,
+    0x7F, 0x28, 0x44, 0x44, 0x38,
+    0x38, 0x44, 0x44, 0x44, 0x28,
+    0x38, 0x44, 0x44, 0x28, 0x7F,
+    0x38, 0x54, 0x54, 0x54, 0x18,
+    0x00, 0x08, 0x7E, 0x09, 0x02,
+    0x18, 0xA4, 0xA4, 0x9C, 0x78,
+    0x7F, 0x08, 0x04, 0x04, 0x78,
+    0x00, 0x44, 0x7D, 0x40, 0x00,
+    0x20, 0x40, 0x40, 0x3D, 0x00,
+    0x7F, 0x10, 0x28, 0x44, 0x00,
+    0x00, 0x41, 0x7F, 0x40, 0x00,
+    0x7C, 0x04, 0x78, 0x04, 0x78,
+    0x7C, 0x08, 0x04, 0x04, 0x78,
+    0x38, 0x44, 0x44, 0x44, 0x38,
+    0xFC, 0x18, 0x24, 0x24, 0x18,
+    0x18, 0x24, 0x24, 0x18, 0xFC,
+    0x7C, 0x08, 0x04, 0x04, 0x08,
+    0x48, 0x54, 0x54, 0x54, 0x24,
+    0x04, 0x04, 0x3F, 0x44, 0x24,
+    0x3C, 0x40, 0x40, 0x20, 0x7C,
+    0x1C, 0x20, 0x40, 0x20, 0x1C,
+    0x3C, 0x40, 0x30, 0x40, 0x3C,
+    0x44, 0x28, 0x10, 0x28, 0x44,
+    0x4C, 0x90, 0x90, 0x90, 0x7C,
+    0x44, 0x64, 0x54, 0x4C, 0x44,
+    0x00, 0x08, 0x36, 0x41, 0x00,
+    0x00, 0x00, 0x77, 0x00, 0x00,
+    0x00, 0x41, 0x36, 0x08, 0x00,
+    0x02, 0x01, 0x02, 0x04, 0x02,
+    0x3C, 0x26, 0x23, 0x26, 0x3C,
+    0x1E, 0xA1, 0xA1, 0x61, 0x12,
+    0x3A, 0x40, 0x40, 0x20, 0x7A,
+    0x38, 0x54, 0x54, 0x55, 0x59,
+    0x21, 0x55, 0x55, 0x79, 0x41,
+    0x21, 0x54, 0x54, 0x78, 0x41,
+    0x21, 0x55, 0x54, 0x78, 0x40,
+    0x20, 0x54, 0x55, 0x79, 0x40,
+    0x0C, 0x1E, 0x52, 0x72, 0x12,
+    0x39, 0x55, 0x55, 0x55, 0x59,
+    0x39, 0x54, 0x54, 0x54, 0x59,
+    0x39, 0x55, 0x54, 0x54, 0x58,
+    0x00, 0x00, 0x45, 0x7C, 0x41,
+    0x00, 0x02, 0x45, 0x7D, 0x42,
+    0x00, 0x01, 0x45, 0x7C, 0x40,
+    0xF0, 0x29, 0x24, 0x29, 0xF0,
+    0xF0, 0x28, 0x25, 0x28, 0xF0,
+    0x7C, 0x54, 0x55, 0x45, 0x00,
+    0x20, 0x54, 0x54, 0x7C, 0x54,
+    0x7C, 0x0A, 0x09, 0x7F, 0x49,
+    0x32, 0x49, 0x49, 0x49, 0x32,
+    0x32, 0x48, 0x48, 0x48, 0x32,
+    0x32, 0x4A, 0x48, 0x48, 0x30,
+    0x3A, 0x41, 0x41, 0x21, 0x7A,
+    0x3A, 0x42, 0x40, 0x20, 0x78,
+    0x00, 0x9D, 0xA0, 0xA0, 0x7D,
+    0x39, 0x44, 0x44, 0x44, 0x39,
+    0x3D, 0x40, 0x40, 0x40, 0x3D,
+    0x3C, 0x24, 0xFF, 0x24, 0x24,
+    0x48, 0x7E, 0x49, 0x43, 0x66,
+    0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
+    0xFF, 0x09, 0x29, 0xF6, 0x20,
+    0xC0, 0x88, 0x7E, 0x09, 0x03,
+    0x20, 0x54, 0x54, 0x79, 0x41,
+    0x00, 0x00, 0x44, 0x7D, 0x41,
+    0x30, 0x48, 0x48, 0x4A, 0x32,
+    0x38, 0x40, 0x40, 0x22, 0x7A,
+    0x00, 0x7A, 0x0A, 0x0A, 0x72,
+    0x7D, 0x0D, 0x19, 0x31, 0x7D,
+    0x26, 0x29, 0x29, 0x2F, 0x28,
+    0x26, 0x29, 0x29, 0x29, 0x26,
+    0x30, 0x48, 0x4D, 0x40, 0x20,
+    0x38, 0x08, 0x08, 0x08, 0x08,
+    0x08, 0x08, 0x08, 0x08, 0x38,
+    0x2F, 0x10, 0xC8, 0xAC, 0xBA,
+    0x2F, 0x10, 0x28, 0x34, 0xFA,
+    0x00, 0x00, 0x7B, 0x00, 0x00,
+    0x08, 0x14, 0x2A, 0x14, 0x22,
+    0x22, 0x14, 0x2A, 0x14, 0x08,
+    0xAA, 0x00, 0x55, 0x00, 0xAA,
+    0xAA, 0x55, 0xAA, 0x55, 0xAA,
+    0x00, 0x00, 0x00, 0xFF, 0x00,
+    0x10, 0x10, 0x10, 0xFF, 0x00,
+    0x14, 0x14, 0x14, 0xFF, 0x00,
+    0x10, 0x10, 0xFF, 0x00, 0xFF,
+    0x10, 0x10, 0xF0, 0x10, 0xF0,
+    0x14, 0x14, 0x14, 0xFC, 0x00,
+    0x14, 0x14, 0xF7, 0x00, 0xFF,
+    0x00, 0x00, 0xFF, 0x00, 0xFF,
+    0x14, 0x14, 0xF4, 0x04, 0xFC,
+    0x14, 0x14, 0x17, 0x10, 0x1F,
+    0x10, 0x10, 0x1F, 0x10, 0x1F,
+    0x14, 0x14, 0x14, 0x1F, 0x00,
+    0x10, 0x10, 0x10, 0xF0, 0x00,
+    0x00, 0x00, 0x00, 0x1F, 0x10,
+    0x10, 0x10, 0x10, 0x1F, 0x10,
+    0x10, 0x10, 0x10, 0xF0, 0x10,
+    0x00, 0x00, 0x00, 0xFF, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0xFF, 0x10,
+    0x00, 0x00, 0x00, 0xFF, 0x14,
+    0x00, 0x00, 0xFF, 0x00, 0xFF,
+    0x00, 0x00, 0x1F, 0x10, 0x17,
+    0x00, 0x00, 0xFC, 0x04, 0xF4,
+    0x14, 0x14, 0x17, 0x10, 0x17,
+    0x14, 0x14, 0xF4, 0x04, 0xF4,
+    0x00, 0x00, 0xFF, 0x00, 0xF7,
+    0x14, 0x14, 0x14, 0x14, 0x14,
+    0x14, 0x14, 0xF7, 0x00, 0xF7,
+    0x14, 0x14, 0x14, 0x17, 0x14,
+    0x10, 0x10, 0x1F, 0x10, 0x1F,
+    0x14, 0x14, 0x14, 0xF4, 0x14,
+    0x10, 0x10, 0xF0, 0x10, 0xF0,
+    0x00, 0x00, 0x1F, 0x10, 0x1F,
+    0x00, 0x00, 0x00, 0x1F, 0x14,
+    0x00, 0x00, 0x00, 0xFC, 0x14,
+    0x00, 0x00, 0xF0, 0x10, 0xF0,
+    0x10, 0x10, 0xFF, 0x10, 0xFF,
+    0x14, 0x14, 0x14, 0xFF, 0x14,
+    0x10, 0x10, 0x10, 0x1F, 0x00,
+    0x00, 0x00, 0x00, 0xF0, 0x10,
+    0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+    0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+    0xFF, 0xFF, 0xFF, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xFF, 0xFF,
+    0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
+    0x38, 0x44, 0x44, 0x38, 0x44,
+    0x7C, 0x2A, 0x2A, 0x3E, 0x14,
+    0x7E, 0x02, 0x02, 0x06, 0x06,
+    0x02, 0x7E, 0x02, 0x7E, 0x02,
+    0x63, 0x55, 0x49, 0x41, 0x63,
+    0x38, 0x44, 0x44, 0x3C, 0x04,
+    0x40, 0x7E, 0x20, 0x1E, 0x20,
+    0x06, 0x02, 0x7E, 0x02, 0x02,
+    0x99, 0xA5, 0xE7, 0xA5, 0x99,
+    0x1C, 0x2A, 0x49, 0x2A, 0x1C,
+    0x4C, 0x72, 0x01, 0x72, 0x4C,
+    0x30, 0x4A, 0x4D, 0x4D, 0x30,
+    0x30, 0x48, 0x78, 0x48, 0x30,
+    0xBC, 0x62, 0x5A, 0x46, 0x3D,
+    0x3E, 0x49, 0x49, 0x49, 0x00,
+    0x7E, 0x01, 0x01, 0x01, 0x7E,
+    0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
+    0x44, 0x44, 0x5F, 0x44, 0x44,
+    0x40, 0x51, 0x4A, 0x44, 0x40,
+    0x40, 0x44, 0x4A, 0x51, 0x40,
+    0x00, 0x00, 0xFF, 0x01, 0x03,
+    0xE0, 0x80, 0xFF, 0x00, 0x00,
+    0x08, 0x08, 0x6B, 0x6B, 0x08,
+    0x36, 0x12, 0x36, 0x24, 0x36,
+    0x06, 0x0F, 0x09, 0x0F, 0x06,
+    0x00, 0x00, 0x18, 0x18, 0x00,
+    0x00, 0x00, 0x10, 0x10, 0x00,
+    0x30, 0x40, 0xFF, 0x01, 0x01,
+    0x00, 0x1F, 0x01, 0x01, 0x1E,
+    0x00, 0x19, 0x1D, 0x17, 0x12,
+    0x00, 0x3C, 0x3C, 0x3C, 0x3C,
+    0x00, 0x00, 0x00, 0x00, 0x00
+};

drivers/qwiic/util/font8x16.h

@@ -0,0 +1,127 @@
+/******************************************************************************
+font8x16.h
+Definition for medium font
+
+This file was imported from the MicroView library, written by GeekAmmo
+(https://github.com/geekammo/MicroView-Arduino-Library), and released under
+the terms of the GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Modified by:
+Emil Varughese @ Edwin Robotics Pvt. Ltd.
+July 27, 2015
+https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+******************************************************************************/
+#pragma once
+
+#include "progmem.h"
+
+static const unsigned char font8x16[] PROGMEM = {
+    // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
+    8,16,32,96,2,56,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00,
+    0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00,
+    0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00,
+    0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00,
+    0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00,
+    0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00,
+    0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00,
+    0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00,
+    0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00,
+    0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00,
+    0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00,
+    0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00,
+    0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
+    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00,
+    0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00,
+    0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00,
+    0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00,
+    0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00,
+    0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00,
+    0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00,
+    0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
+    0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
+    0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00,
+    0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00,
+    0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00,
+    0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00,
+    0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00,
+    0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00,
+    0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x01, 0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00,
+    0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00,
+    0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
+    0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
+    0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
+    0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
+    0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
+    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00,
+    0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00,
+    0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
+    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00,
+    0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00,
+    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00,
+    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
+    0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00,
+    0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00,
+    0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00,
+    0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00,
+    0x00, 0x10, 0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00,
+    0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00,
+    0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
+    0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00,
+    0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00,
+    0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00,
+    0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};

keyboards/1upkeyboards/1up60hse/config.h

@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/1upkeyboards/1up60hse/keymaps/default/config.h

@@ -1,4 +1,5 @@
 /* Copyright 2018 MechMerlin
+ * Copyright 2018 Logan Huskins
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c

@@ -1,4 +1,5 @@
 /* Copyright 2018 MechMerlin
+ * Copyright 2018 Logan Huskins
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,28 +18,26 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_60_ansi(
-		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, 
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
-		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
-		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, 
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(2), KC_RGUI, KC_RCTL),
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LCTL
+  ),
 
-	[1] = LAYOUT_60_ansi(
-		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+  [1] = LAYOUT_60_ansi(
+    KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+    KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
+    KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+    KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS
+  ),
 
   [2] = LAYOUT_60_ansi(
-		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_STEP, BL_DEC, BL_INC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, RGB_SAI, RGB_HUD, RGB_HUI, RGB_MOD, RGB_TOG, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
+    BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-

keyboards/1upkeyboards/1up60hse/keymaps/default/readme.md

@@ -1,6 +1,4 @@
-# 1up60hse default keymap
+# 1up60hse default keymap generated by QMK Configurator
 
-This is the default keymap provided by [1upkeyboards](https://www.1upkeyboards.com).  
+This is the keymap used by [QMK Configurator](https://config.qmk.fm/#/1upkeyboards/1up60hse/LAYOUT_60_ansi) as default.  
 
-## Notes
-- Software reset key is located on `Esc` on the third layer.

keyboards/1upkeyboards/1up60hte/1up60hte.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "1up60hte.h"

keyboards/1upkeyboards/1up60hte/1up60hte.h

@@ -0,0 +1,50 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
+	K400, K401, K402,                   K406,                   K410, K411, K412, K413  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413 }  \
+}
+
+/* HHKB Variant */
+#define LAYOUT_60_hhkb( \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
+	      K401, K402,                  K406,                    K410, K411,       K413  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO }, \
+	{ KC_NO, K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413 }  \
+}
+

keyboards/1upkeyboards/1up60hte/config.h

@@ -0,0 +1,65 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    1upkeyboards
+#define PRODUCT         1up60hte
+#define DESCRIPTION     A custom 60% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
+#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D0, D1, D2, D3, D5, D6, D7, B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c

@@ -0,0 +1,80 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_NO,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_BSPC),
+
+	[1] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+void matrix_init_user(void) {
+  setPinOutput(B6);
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		writePinLow(B6);
+	} else {
+		writePinHigh(B6);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c

@@ -0,0 +1,79 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(1),
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_BSPC),
+
+	[1] = LAYOUT_all(
+		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS,
+		KC_CAPS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL)
+};
+
+void matrix_init_user(void) {
+  setPinOutput(B6);
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		writePinLow(B6);
+	} else {
+		writePinHigh(B6);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1upkeyboards/1up60hte/readme.md

@@ -0,0 +1,18 @@
+
+# 1up60hte (Hot Swap Tsangan Edition)
+
+![1up60hte](https://www.1upkeyboards.com/wp-content/uploads/2019/01/PCB-60-HS-TSA-both.jpg)
+
+
+A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a Tsangan layout.
+
+Keyboard Maintainer: [Bubnick](https://github.com/bubnick)  
+Hardware Supported: 1up60hte 60% PCB  
+
+Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 1upkeyboards/1up60hte:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -33,15 +33,14 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
 # Build Options
 #   comment out to disable the options.
 #
@@ -54,6 +53,6 @@ SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes
 
-LAYOUTS = ortho_3x10
+LAYOUTS = 60_hhkb

keyboards/1upkeyboards/1up60rgb/config.h

@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS