Apply MAKEFLAGS to speed up CI

* correct indicator light states.

function of indicator lights was inverted. these changes correct that.

* flesh out keymaps pre production

.clang-format

@@ -0,0 +1,26 @@
+---
+BasedOnStyle: Google
+AlignAfterOpenBracket: Align
+AlignConsecutiveAssignments: 'true'
+AlignConsecutiveDeclarations: 'true'
+AlignOperands: 'true'
+AllowAllParametersOfDeclarationOnNextLine: 'false'
+AlwaysBreakAfterDefinitionReturnType: None
+AlwaysBreakAfterReturnType: None
+AlwaysBreakBeforeMultilineStrings: 'false'
+BinPackArguments: 'true'
+BinPackParameters: 'true'
+ColumnLimit: '1000'
+IndentCaseLabels: 'true'
+IndentPPDirectives: AfterHash
+IndentWidth: '2'
+MaxEmptyLinesToKeep: '1'
+PointerAlignment: Right
+SortIncludes: 'false'
+SpaceBeforeAssignmentOperators: 'true'
+SpaceBeforeParens: ControlStatements
+SpaceInEmptyParentheses: 'false'
+TabWidth: '2'
+UseTab: Never
+
+...

.github/ISSUE_TEMPLATE/blank.md

@@ -0,0 +1,5 @@
+---
+name: Blank issue
+about: If you're 100% sure that you don't need one of the other issue templates, use this one instead. 
+
+---

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,32 @@
+---
+name: Bug report
+about: Create a report to help us improve the QMK Firmware
+---
+<!-- Provide a general summary of the bug in the title above. -->
+
+<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
+
+## Describe the Bug
+
+<!-- A clear and concise description of what the bug is. -->
+
+## System Information
+
+ - Keyboard:  
+   - Revision (if applicable):  
+ - Operating system:
+ - AVR GCC version: 
+<!-- Run `avr-gcc --version` to find this out. -->
+ - ARM GCC version: 
+<!-- Run `arm-none-eabi-gcc --version` to find this out. -->
+ - QMK Firmware version:
+<!-- Run `git describe --abbrev=0 --tags` to find this out. -->
+ - Any keyboard related software installed? 
+   - [ ] AutoHotKey
+   - [ ] Karabiner
+   - [ ] Other:
+
+## Additional Context
+
+<!-- Add any other relevant information about the problem here. -->

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,19 @@
+---
+name: Feature request
+about: Suggest a new feature or changes to existing features 
+---
+<!--- Provide a general summary of the changes you want in the title above. -->
+
+<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
+
+## Feature Request Type
+
+- [ ] Core functionality
+- [ ] Add-on hardware support (eg. audio, RGB, OLED screen, etc.)
+- [ ] Alteration (enhancement/optimization) of existing feature(s)
+- [ ] New behavior
+
+## Description
+
+<!-- A few sentences describing what it is that you'd like to see in QMK. Additional information (such as links to spec sheets, licensing info, other related issues or PRs, etc) would be helpful. -->

.github/ISSUE_TEMPLATE/other_issues.md

@@ -0,0 +1,9 @@
+---
+name: Other issues
+about: Anything else that doesn't fall into the above categories. 
+---
+<!--- Provide a general summary of the changes you want in the title above. -->
+
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
+
+<!-- Please check https://docs.qmk.fm/#/support for additional resources first. If that doesn't answer your question, choose the bug report template instead, as that may be more appropriate. -->

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,34 @@
+<!--- Provide a general summary of your changes in the title above. -->
+
+<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
+
+## Description
+
+<!--- Describe your changes in detail here. -->
+
+## Types of Changes
+
+<!--- What types of changes does your code introduce? Put an `x` in all the boxes that apply. -->
+- [ ] Core
+- [ ] Bugfix
+- [ ] New feature
+- [ ] Enhancement/optimization
+- [ ] Keyboard (addition or update)
+- [ ] Keymap/layout/userspace (addition or update)
+- [ ] Documentation
+
+## Issues Fixed or Closed by This PR
+
+* 
+
+## Checklist
+
+<!--- Go over all the following points, and put an `x` in all the boxes that apply. -->
+<!--- If you're unsure about any of these, don't hesitate to ask. We're here to help! -->
+- [ ] My code follows the code style of this project.
+- [ ] My change requires a change to the documentation.
+- [ ] I have updated the documentation accordingly.
+- [ ] I have read the [**CONTRIBUTING** document](https://docs.qmk.fm/#/contributing).
+- [ ] I have added tests to cover my changes.
+- [ ] I have tested the changes and verified that they work and don't break anything (as well as I can manage).

.gitignore

@@ -1,3 +1,4 @@
+.history/
 .dep
 *.o
 *.bin

.travis.yml

@@ -10,6 +10,7 @@ branches:
 env:
   global:
   - secure: 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
+  - MAKEFLAGS="-j3 --output-sync"
 before_install:
   - wget http://ww1.microchip.com/downloads/en/DeviceDoc/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz || wget http://qmk.fm/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
 install:
@@ -19,7 +20,8 @@ install:
 before_script:
   - avr-gcc --version
 script:
-- make test:all AUTOGEN=false
+- git rev-parse --short HEAD
+- make test:all
 - bash util/travis_build.sh
 - bash util/travis_docs.sh
 addons:
@@ -33,7 +35,7 @@ addons:
     - diffutils
     - dos2unix
     - doxygen
-after_success: 
+after_success:
   bash util/travis_compiled_push.sh
 notifications:
   webhooks:

Dockerfile

@@ -1,28 +1,29 @@
-FROM debian:jessie
-MAINTAINER Erik Dasque <erik@frenchguys.com>
+FROM debian:9
 
-RUN apt-get update && apt-get install --no-install-recommends -y build-essential \
+RUN apt-get update && apt-get install --no-install-recommends -y \
+    avr-libc \
+    avrdude \
+    binutils-arm-none-eabi \
+    binutils-avr \
+    build-essential \
+    dfu-programmer \
+    dfu-util \
     gcc \
+    gcc-arm-none-eabi \
+    gcc-avr \
+    git \
+    libnewlib-arm-none-eabi \
+    software-properties-common \
     unzip \
     wget \
     zip \
-    gcc-avr \
-    binutils-avr \
-    avr-libc \
-    dfu-programmer \
-    dfu-util \
-    gcc-arm-none-eabi \
-    binutils-arm-none-eabi \
-    libnewlib-arm-none-eabi \
-    git \
-    software-properties-common \
-    avrdude \
     && rm -rf /var/lib/apt/lists/*
 
-ENV keyboard=ergodox
-ENV subproject=ez
-ENV keymap=default
+ENV KEYBOARD=ergodox_ez
+ENV KEYMAP=default
 
-VOLUME /qmk
-WORKDIR /qmk
-CMD make clean ; make keyboard=${keyboard} subproject=${subproject} keymap=${keymap}
+VOLUME /qmk_firmware
+WORKDIR /qmk_firmware
+COPY . .
+
+CMD make $KEYBOARD:$KEYMAP

Makefile

@@ -112,23 +112,29 @@ $(eval $(call GET_KEYBOARDS))
 # Only consider folders with makefiles, to prevent errors in case there are extra folders
 #KEYBOARDS += $(patsubst $(ROOD_DIR)/keyboards/%/rules.mk,%,$(wildcard $(ROOT_DIR)/keyboards/*/*/rules.mk))
 
+.PHONY: list-keyboards
 list-keyboards:
 	echo $(KEYBOARDS)
-	exit 0
 
 define PRINT_KEYBOARD
 	$(info $(PRINTING_KEYBOARD))
 endef
 
+.PHONY: generate-keyboards-file
 generate-keyboards-file:
 	$(foreach PRINTING_KEYBOARD,$(KEYBOARDS),$(eval $(call PRINT_KEYBOARD)))
-	exit 0
 
+.PHONY: clean
 clean:
-	echo -n 'Deleting .build ... '
+	echo -n 'Deleting .build/ ... '
 	rm -rf $(BUILD_DIR)
-	echo 'done'
-	exit 0
+	echo 'done.'
+
+.PHONY: distclean
+distclean: clean
+	echo -n 'Deleting *.bin and *.hex ... '
+	rm -f *.bin *.hex
+	echo 'done.'
 
 #Compatibility with the old make variables, anything you specify directly on the command line
 # always overrides the detected folders
@@ -530,9 +536,9 @@ endef
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
-	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --init lib/chibios; fi
-	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --init lib/chibios-contrib; fi
-	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --init lib/ugfx; fi
+	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 1 --init lib/chibios; fi
+	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 1 --init lib/chibios-contrib; fi
+	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 1 --init lib/ugfx; fi
 	git submodule status --recursive 2>/dev/null | \
 	while IFS= read -r x; do \
 		case "$$x" in \
@@ -548,9 +554,10 @@ endif
 	# it has to be there to allow parallel execution of the submake
 	# This always tries to compile everything, even if error occurs in the middle
 	# But we return the error code at the end, to trigger travis failures
-	$(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND))
+	# The sort at this point is to remove duplicates
+	$(foreach COMMAND,$(sort $(COMMANDS)),$(RUN_COMMAND))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
-	$(foreach TEST,$(TESTS),$(RUN_TEST))
+	$(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 
 # These no longer work because of the colon system
@@ -576,6 +583,7 @@ lib/%:
 	git submodule sync $?
 	git submodule update --init $?
 
+.PHONY: git-submodule
 git-submodule:
 	git submodule sync --recursive
 	git submodule update --init --recursive --progress

Vagrantfile

@@ -2,8 +2,11 @@
 # vi: set ft=ruby :
 
 Vagrant.configure(2) do |config|
-  # VMware/Virtualbox 64 bit
-  config.vm.box = "phusion/ubuntu-14.04-amd64"
+  # define a name instead of just 'default'
+  config.vm.define "qmk_firmware"
+
+  # VMware/Virtualbox ( and also Hyperv/Parallels) 64 bit
+  config.vm.box = "generic/debian9"
 
   # This section allows you to customize the Virtualbox VM
   # settings, ie showing the GUI or upping the memory
@@ -15,13 +18,16 @@ Vagrant.configure(2) do |config|
     # your Teensy via the VM rather than your host OS
     #vb.customize ['modifyvm', :id, '--usb', 'on']
     #vb.customize ['usbfilter', 'add', '0',
-    #    	  '--target', :id,
-    #    	  '--name', 'teensy',
-    #    	  '--vendorid', '0x16c0',
-    #    	  '--productid','0x0478'
-    #		 ]
+    #         '--target', :id,
+    #         '--name', 'teensy',
+    #         '--vendorid', '0x16c0',
+    #         '--productid','0x0478'
+    #        ]
     # Customize the amount of memory on the VM:
     vb.memory = "512"
+    # Uncomment the below lines if you have time sync
+    # issues with make and incremental builds
+    #vb.customize [ "guestproperty", "set", :id, "/VirtualBox/GuestAdd/VBoxService/--timesync-set-threshold", 1000 ]
   end
 
   # This section allows you to customize the VMware VM
@@ -49,26 +55,25 @@ Vagrant.configure(2) do |config|
   # image, you'll need to: chmod -R a+rw .
   config.vm.provider "docker" do |docker, override|
     override.vm.box = nil
-    docker.image = "jesselang/debian-vagrant:jessie"
+    docker.image = "jesselang/debian-vagrant:stretch"
     docker.has_ssh = true
   end
 
   # This script ensures the required packages for AVR programming are installed
   # It also ensures the system always gets the latest updates when powered on
   # If this causes issues you can run a 'vagrant destroy' and then
-  # add a # before ,args: and run 'vagrant up' to get a working
+  # add a # before ,run: (or change "always" to "once") and run 'vagrant up' to get a working
   # non-updated box and then attempt to troubleshoot or open a Github issue
-
-  config.vm.provision "shell", run: "always", path: "./util/qmk_install.sh", args: "-update"
+  config.vm.provision "shell", inline: "/bin/sh -c 'yes | /vagrant/util/qmk_install.sh'", run: "always"
 
   config.vm.post_up_message = <<-EOT
 
   Log into the VM using 'vagrant ssh'. QMK directory synchronized with host is
   located at /vagrant
-  To compile the .hex files use make command inside this directory.
+  To compile the .hex files use make command inside this directory, e.g.
+     cd /vagrant
+     make <keyboard>:default
 
-  QMK's make format recently changed to use folder locations and colons:
-     make project_folder:keymap[:target]
   Examples:
      make planck/rev4:default:dfu
      make planck:default

build_keyboard.mk

@@ -16,6 +16,7 @@ include common.mk
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
+STM32_PATH := quantum/stm32
 
 # Force expansion
 TARGET := $(TARGET)
@@ -34,6 +35,10 @@ $(error MASTER does not have a valid value(left/right))
     endif
 endif
 
+ifdef SKIP_VERSION
+    OPT_DEFS += -DSKIP_VERSION
+endif
+
 # Determine which subfolders exist.
 KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
 KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
@@ -68,6 +73,7 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
     KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
 endif
 
+
 # Pull in rules.mk files from all our subfolders
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
     include $(KEYBOARD_PATH_5)/rules.mk
@@ -85,6 +91,62 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
     include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
+
+MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
+
+ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_5)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_4)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_3)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_2)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_1)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
+else ifneq ($(LAYOUTS),)
+    include build_layout.mk
+else
+    $(error Could not find keymap)
+    # this state should never be reached
+endif
+
+ifeq ($(strip $(CTPC)), yes)
+  CONVERT_TO_PROTON_C=yes
+endif
+
+ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
+    TARGET := $(TARGET)_proton_c
+    include $(STM32_PATH)/proton_c.mk
+    OPT_DEFS += -DCONVERT_TO_PROTON_C
+endif
+
+ifneq ($(FORCE_LAYOUT),)
+    TARGET := $(TARGET)_$(FORCE_LAYOUT)
+endif
+
+include quantum/mcu_selection.mk
+
+ifdef MCU_FAMILY
+    OPT_DEFS += -DQMK_STM32
+    KEYBOARD_PATHS += $(STM32_PATH)
+endif
+
+
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 
@@ -223,39 +285,6 @@ PROJECT_DEFS := $(OPT_DEFS)
 PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
 PROJECT_CONFIG := $(CONFIG_H)
 
-MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
-
-ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_5)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_4)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_3)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_2)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_1)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
-else ifneq ($(LAYOUTS),)
-    include build_layout.mk
-else
-    $(error Could not find keymap)
-    # this state should never be reached
-endif
-
 # Userspace setup and definitions
 ifeq ("$(USER_NAME)","")
     USER_NAME := $(KEYMAP)
@@ -278,6 +307,7 @@ ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
 endif
 
 # # project specific files
+SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
 SRC += $(KEYBOARD_SRC) \
     $(KEYMAP_C) \
     $(QUANTUM_SRC)
@@ -296,6 +326,7 @@ include $(TMK_PATH)/protocol.mk
 include $(TMK_PATH)/common.mk
 include bootloader.mk
 
+SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
 SRC += $(TMK_COMMON_SRC)
 OPT_DEFS += $(TMK_COMMON_DEFS)
 EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
@@ -342,5 +373,7 @@ $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 # Default target.
 all: build check-size
 build: elf cpfirmware
+check-size: build
 
+include show_options.mk
 include $(TMK_PATH)/rules.mk

build_layout.mk

@@ -15,4 +15,13 @@ define SEARCH_LAYOUTS
     $$(foreach LAYOUTS_REPO,$$(LAYOUTS_REPOS),$$(eval $$(call SEARCH_LAYOUTS_REPO)))
 endef
 
+ifneq ($(FORCE_LAYOUT),)
+    ifneq (,$(findstring $(FORCE_LAYOUT),$(LAYOUTS)))
+        $(info Forcing layout: $(FORCE_LAYOUT))
+        LAYOUTS := $(FORCE_LAYOUT)
+    else
+        $(error Forced layout does not exist)
+    endif
+endif
+
 $(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))

common.mk

@@ -21,5 +21,4 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
 COMMON_VPATH += $(QUANTUM_PATH)/audio
 COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
 COMMON_VPATH += $(QUANTUM_PATH)/api
-COMMON_VPATH += $(QUANTUM_PATH)/split_common
 COMMON_VPATH += $(DRIVER_PATH)

common_features.mk

@@ -114,8 +114,28 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
+VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 custom
+
+LED_MATRIX_ENABLE ?= no
+ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
+    ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
+        $(error LED_MATRIX_ENABLE="$(LED_MATRIX_ENABLE)" is not a valid matrix type)
+    else
+        OPT_DEFS += -DLED_MATRIX_ENABLE -DBACKLIGHT_ENABLE -DBACKLIGHT_CUSTOM_DRIVER
+        SRC += $(QUANTUM_DIR)/led_matrix.c
+        SRC += $(QUANTUM_DIR)/led_matrix_drivers.c
+    endif
+endif
+
+ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
+    OPT_DEFS += -DIS31FL3731
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3731-simple.c
+    SRC += i2c_master.c
+endif
+
 RGB_MATRIX_ENABLE ?= no
-VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
+
 ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
 ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
     $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
@@ -132,19 +152,26 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
-    OPT_DEFS += -DIS31FL3731
+    OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3731.c
     SRC += i2c_master.c
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
-    OPT_DEFS += -DIS31FL3733
+    OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3733.c
     SRC += i2c_master.c
 endif
 
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
+    OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3737.c
+    SRC += i2c_master.c
+endif
+
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
     OPT_DEFS += -DTAP_DANCE_ENABLE
     SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
@@ -191,7 +218,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
         CIE1931_CURVE = yes
     endif
-        ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+    ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
     endif
 endif
@@ -227,16 +254,31 @@ endif
 
 ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L)
     COMMON_VPATH += $(DRIVER_PATH)/haptic
+    SRC += haptic.c
     SRC += DRV2605L.c
     SRC += i2c_master.c
+    OPT_DEFS += -DHAPTIC_ENABLE
     OPT_DEFS += -DDRV2605L
 endif
 
+ifeq ($(strip $(HAPTIC_ENABLE)), SOLENOID)
+    COMMON_VPATH += $(DRIVER_PATH)/haptic
+    SRC += haptic.c
+    SRC += solenoid.c
+    OPT_DEFS += -DHAPTIC_ENABLE
+    OPT_DEFS += -DSOLENOID_ENABLE
+endif
+
 ifeq ($(strip $(HD44780_ENABLE)), yes)
     SRC += drivers/avr/hd44780.c
     OPT_DEFS += -DHD44780_ENABLE
 endif
 
+ifeq ($(strip $(VELOCIKEY_ENABLE)), yes)
+    OPT_DEFS += -DVELOCIKEY_ENABLE
+    SRC += $(QUANTUM_DIR)/velocikey.c
+endif
+
 ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes)
     OPT_DEFS += -DDYNAMIC_KEYMAP_ENABLE
     SRC += $(QUANTUM_DIR)/dynamic_keymap.c
@@ -254,6 +296,7 @@ QUANTUM_SRC:= \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
 
+# Include the standard or split matrix code if needed
 ifneq ($(strip $(CUSTOM_MATRIX)), yes)
     ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
         QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
@@ -262,10 +305,27 @@ ifneq ($(strip $(CUSTOM_MATRIX)), yes)
     endif
 endif
 
+DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
+# Debounce Modules. Set DEBOUNCE_TYPE=custom if including one manually.
+DEBOUNCE_TYPE?= sym_g
+ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
+endif
+
 ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
     OPT_DEFS += -DSPLIT_KEYBOARD
-    QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
-                $(QUANTUM_DIR)/split_common/split_util.c \
-                $(QUANTUM_DIR)/split_common/i2c.c \
-                $(QUANTUM_DIR)/split_common/serial.c
+
+    # Include files used by all split keyboards
+    QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_util.c
+
+    # Determine which (if any) transport files are required
+    ifneq ($(strip $(SPLIT_TRANSPORT)), custom)
+        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c
+        # Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
+        # Unused functions are pruned away, which is why we can add multiple drivers here without bloat.
+        QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/serial.c \
+                           i2c_master.c \
+                           i2c_slave.c
+    endif
+    COMMON_VPATH += $(QUANTUM_PATH)/split_common
 endif

docs/_sidebar.md

@@ -1,99 +0,0 @@
-* [Complete Newbs Guide](newbs.md)
-  * [Getting Started](newbs_getting_started.md)
-  * [Building Your First Firmware](newbs_building_firmware.md)
-  * [Flashing Firmware](newbs_flashing.md)
-  * [Testing and Debugging](newbs_testing_debugging.md)
-  * [Best Practices](newbs_best_practices.md)
-  * [Learning Resources](newbs_learn_more_resources.md)
-
-* [QMK Basics](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
-* [FAQ](faq.md)
-  * [General FAQ](faq_general.md)
-  * [Build/Compile QMK](faq_build.md)
-  * [Debugging/Troubleshooting QMK](faq_debug.md)
-  * [Keymap](faq_keymap.md)
-
-* Detailed Guides
-  * [Install Build Tools](getting_started_build_tools.md)
-  * [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Keymap Overview](keymap.md)
-
-* [Hardware](hardware.md)
-  * [AVR Processors](hardware_avr.md)
-  * [Drivers](hardware_drivers.md)
-
-* Reference
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
-  * [Config Options](config_options.md)
-  * [Keycodes](keycodes.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
-  * [Glossary](reference_glossary.md)
-  * [Unit Testing](unit_testing.md)
-  * [Useful Functions](ref_functions.md)
-  * [Configurator Support](reference_configurator_support.md)
-
-* [Features](features.md)
-  * [Basic Keycodes](keycodes_basic.md)
-  * [Quantum Keycodes](quantum_keycodes.md)
-  * [Advanced Keycodes](feature_advanced_keycodes.md)
-  * [Audio](feature_audio.md)
-  * [Auto Shift](feature_auto_shift.md)
-  * [Backlight](feature_backlight.md)
-  * [Bluetooth](feature_bluetooth.md)
-  * [Bootmagic](feature_bootmagic.md)
-  * [Combos](feature_combo)
-  * [Command](feature_command.md)
-  * [Dynamic Macros](feature_dynamic_macros.md)
-  * [Encoders](feature_encoders.md)
-  * [Grave Escape](feature_grave_esc.md)
-  * [Key Lock](feature_key_lock.md)
-  * [Layouts](feature_layouts.md)
-  * [Leader Key](feature_leader_key.md)
-  * [Macros](feature_macros.md)
-  * [Mouse Keys](feature_mouse_keys.md)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [Pointing Device](feature_pointing_device.md)
-  * [PS/2 Mouse](feature_ps2_mouse.md)
-  * [RGB Lighting](feature_rgblight.md)
-  * [RGB Matrix](feature_rgb_matrix.md)
-  * [Space Cadet Shift](feature_space_cadet_shift.md)
-  * [Space Cadet Shift Enter](feature_space_cadet_shift_enter.md)
-  * [Stenography](feature_stenography.md)
-  * [Swap Hands](feature_swap_hands.md)
-  * [Tap Dance](feature_tap_dance.md)
-  * [Terminal](feature_terminal.md)
-  * [Thermal Printer](feature_thermal_printer.md)
-  * [Unicode](feature_unicode.md)
-  * [Userspace](feature_userspace.md)
-  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
-
-* For Makers and Modders
-  * [Hand Wiring Guide](hand_wire.md)
-  * [ISP Flashing Guide](isp_flashing_guide.md)
-  * [ARM Debugging Guide](arm_debugging.md)
-  * [I2C Driver](i2c_driver.md)
-
-* For a Deeper Understanding
-  * [How Keyboards Work](how_keyboards_work.md)
-  * [Understanding QMK](understanding_qmk.md)
-
-* Other Topics
-  * [Using Eclipse with QMK](eclipse.md)
-
-* QMK Internals (In Progress)
-  * [Defines](internals_defines.md)
-  * [Input Callback Reg](internals_input_callback_reg.md)
-  * [Midi Device](internals_midi_device.md)
-  * [Midi Device Setup Process](internals_midi_device_setup_process.md)
-  * [Midi Util](internals_midi_util.md)
-  * [Send Functions](internals_send_functions.md)
-  * [Sysex Tools](internals_sysex_tools.md)

docs/_summary.md

@@ -3,7 +3,7 @@
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
-  * [Best Practices](newbs_best_practices.md)
+  * [Git Best Practices](newbs_best_practices.md)
   * [Learning Resources](newbs_learn_more_resources.md)
 
 * [QMK Basics](README.md)
@@ -40,9 +40,11 @@
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
   * [Configurator Support](reference_configurator_support.md)
+  * [info.json Format](reference_info_json.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)
+  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
   * [Quantum Keycodes](quantum_keycodes.md)
   * [Advanced Keycodes](feature_advanced_keycodes.md)
   * [Audio](feature_audio.md)
@@ -58,6 +60,7 @@
   * [Key Lock](feature_key_lock.md)
   * [Layouts](feature_layouts.md)
   * [Leader Key](feature_leader_key.md)
+  * [LED Matrix](feature_led_matrix.md)
   * [Macros](feature_macros.md)
   * [Mouse Keys](feature_mouse_keys.md)
   * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
@@ -74,20 +77,24 @@
   * [Thermal Printer](feature_thermal_printer.md)
   * [Unicode](feature_unicode.md)
   * [Userspace](feature_userspace.md)
-  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
+  * [Velocikey](feature_velocikey.md)
 
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
   * [I2C Driver](i2c_driver.md)
+  * [GPIO Controls](internals_gpio_control.md)
+  * [Proton C Conversion](proton_c_conversion.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)
   * [Understanding QMK](understanding_qmk.md)
 
 * Other Topics
-  * [Using Eclipse with QMK](eclipse.md)
+  * [Using Eclipse with QMK](other_eclipse.md)
+  * [Using VSCode with QMK](other_vscode.md)
+  * [Support](support.md)
 
 * QMK Internals (In Progress)
   * [Defines](internals_defines.md)

docs/config_options.md

@@ -59,6 +59,8 @@ This is a C header file that is one of the first things included, and will persi
   * define is matrix has ghost (unlikely)
 * `#define DIODE_DIRECTION COL2ROW`
   * COL2ROW or ROW2COL - how your matrix is configured. COL2ROW means the black mark on your diode is facing to the rows, and between the switch and the rows.
+* `#define DIRECT_PINS { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }`
+  * pins mapped to rows and columns, from left to right. Defines a matrix where each switch is connected to a separate pin and ground.
 * `#define AUDIO_VOICES`
   * turns on the alternate audio voices (to cycle through)
 * `#define C4_AUDIO`
@@ -68,11 +70,11 @@ This is a C header file that is one of the first things included, and will persi
 * `#define C6_AUDIO`
   * enables audio on pin C6
 * `#define B5_AUDIO`
-  * enables audio on pin B5 (duophony is enables if one of B[5-7]_AUDIO is enabled along with one of C[4-6]_AUDIO)
+  * enables audio on pin B5 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define B6_AUDIO`
-  * enables audio on pin B6 (duophony is enables if one of B[5-7]_AUDIO is enabled along with one of C[4-6]_AUDIO)
+  * enables audio on pin B6 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define B7_AUDIO`
-  * enables audio on pin B7 (duophony is enables if one of B[5-7]_AUDIO is enabled along with one of C[4-6]_AUDIO)
+  * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define BACKLIGHT_PIN B7`
   * pin of the backlight - B5, B6, B7 use PWM, others use softPWM
 * `#define BACKLIGHT_LEVELS 3`
@@ -87,7 +89,7 @@ This is a C header file that is one of the first things included, and will persi
   * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 * `#define LOCKING_RESYNC_ENABLE`
   * tries to keep switch state consistent with keyboard LED state
-* `#define IS_COMMAND() ( keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) )`
+* `#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))`
   * key combination that allows the use of magic commands (useful for debugging)
 * `#define USB_MAX_POWER_CONSUMPTION`
   * sets the maximum power (in mA) over USB for the device (default: 500)
@@ -109,9 +111,9 @@ If you define these options you will disable the associated feature, which can s
 * `#define NO_ACTION_ONESHOT`
   * disable one-shot modifiers
 * `#define NO_ACTION_MACRO`
-  * disable all macro handling
+  * disable old style macro handling: MACRO() & action_get_macro
 * `#define NO_ACTION_FUNCTION`
-  * disable the action function (deprecated)
+  * disable calling of action_function() from the fn_actions array (deprecated)
 
 ## Features That Can Be Enabled
 
@@ -126,6 +128,8 @@ If you define these options you will enable the associated feature, which may in
 
 * `#define TAPPING_TERM 200`
   * how long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too
+* `#define TAPPING_TERM_PER_KEY`
+  * enables handling for per key `TAPPING_TERM` settings
 * `#define RETRO_TAPPING`
   * tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release
   * See [Retro Tapping](feature_advanced_keycodes.md#retro-tapping) for details
@@ -143,6 +147,11 @@ If you define these options you will enable the associated feature, which may in
   * Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle)
 * `#define LEADER_TIMEOUT 300`
   * how long before the leader key times out
+    * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.
+* `#define LEADER_PER_KEY_TIMING`
+  * sets the timer for leader key chords to run on each key press rather than overall
+* `#define LEADER_KEY_STRICT_KEY_PROCESSING`
+  * Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify `MT(MOD_CTL, KC_A)` if you want to use `KC_A`.
 * `#define ONESHOT_TIMEOUT 300`
   * how long before oneshot times out
 * `#define ONESHOT_TAP_TOGGLE 2`
@@ -160,15 +169,21 @@ If you define these options you will enable the associated feature, which may in
   * Set this to the number of combos that you're using in the [Combo](feature_combo.md) feature.
 * `#define COMBO_TERM 200`
   * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
+* `#define TAP_CODE_DELAY 100`
+  * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
 
 ## RGB Light Configuration
 
 * `#define RGB_DI_PIN D7`
-  * pin the DI on the ws2812 is hooked-up to
+  * pin the DI on the WS2812 is hooked-up to
 * `#define RGBLIGHT_ANIMATIONS`
   * run RGB animations
-* `#define RGBLED_NUM 15`
+* `#define RGBLED_NUM 12`
   * number of LEDs
+* `#define RGBLED_SPLIT { 6, 6 }`
+  * number of LEDs connected that are directly wired to `RGB_DI_PIN` on each half of a split keyboard
+  * First value indicates number of LEDs for left half, second value is for the right half
+  * Needed if both halves of the board have RGB LEDs wired directly to the RGB output pin on the controllers instead of passing the output of the left half to the input of the right half
 * `#define RGBLIGHT_HUE_STEP 12`
   * units to step when in/decreasing hue
 * `#define RGBLIGHT_SAT_STEP 25`
@@ -190,12 +205,58 @@ If you define these options you will enable the associated feature, which may in
 
 Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
 
+* `SPLIT_TRANSPORT = custom`
+  * Allows replacing the standard split communication routines with a custom one. ARM based split keyboards must use this at present.
+
+### Setting Handedness
+
+One thing to remember, the side that the USB port is plugged into is always the master half. The side not plugged into USB is the slave.
+
+There are a few different ways to set handedness for split keyboards (listed in order of precedence):
+
+1. Set `SPLIT_HAND_PIN`: Reads a pin to determine handedness. If pin is high, it's the left side, if low, the half is determined to be the right side
+2. Set `EE_HANDS` and flash `eeprom-lefthand.eep`/`eeprom-righthand.eep` to each half
+   * For boards with DFU bootloader you can use `:dfu-split-left`/`:dfu-split-right` to flash these EEPROM files
+   * For boards with Caterina bootloader (like stock Pro Micros), use `:avrdude-split-left`/`:avrdude-split-right`
+3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
+4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
+
+#### Defines for handedness
+
 * `#define SPLIT_HAND_PIN B7`
-  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace 'B7' with the pin you are using. This is optional and you can still use the EEHANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
-  
+  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+
+* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` is not defined)
+  * Reads the handedness value stored in the EEPROM after `eeprom-lefthand.eep`/`eeprom-righthand.eep` has been flashed to their respective halves.
+
+* `#define MASTER_RIGHT`
+  * Master half is defined to be the right half.
+
+### Other Options
+
 * `#define USE_I2C`
   * For using I2C instead of Serial (defaults to serial)
 
+* `#define SOFT_SERIAL_PIN D0`
+  * When using serial, define this. `D0` or `D1`,`D2`,`D3`,`E6`.
+
+* `#define MATRIX_ROW_PINS_RIGHT { <row pins> }`
+* `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
+  * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.
+
+* `#define RGBLED_SPLIT { 6, 6 }`
+  * See [RGB Light Configuration](#rgb-light-configuration)
+
+* `#define SELECT_SOFT_SERIAL_SPEED <speed>` (default speed is 1)
+  * Sets the protocol speed when using serial communication
+  * Speeds:
+    * 0: about 189kbps (Experimental only)
+    * 1: about 137kbps (default)
+    * 2: about 75kbps
+    * 3: about 39kbps
+    * 4: about 26kbps
+    * 5: about 20kbps
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.
@@ -247,6 +308,8 @@ Use these to enable or disable building certain features. The more you have enab
   * Enable the audio subsystem.
 * `RGBLIGHT_ENABLE`
   * Enable keyboard underlight functionality
+* `LEADER_ENABLE`
+  * Enable leader key chording
 * `MIDI_ENABLE`
   * MIDI controls
 * `UNICODE_ENABLE`
@@ -257,6 +320,10 @@ Use these to enable or disable building certain features. The more you have enab
   * Current options are AdafruitEzKey, AdafruitBLE, RN42
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+* `CUSTOM_MATRIX`
+  * Allows replacing the standard matrix scanning routine with a custom one.
+* `DEBOUNCE_TYPE`
+  * Allows replacing the standard key debouncing routine with an alternative or custom one.
 * `WAIT_FOR_USB`
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`

docs/contributing.md

@@ -91,6 +91,18 @@ int foo(void) {
 }
 ```
 
+# Auto-formatting with clang-format
+
+[Clang-format](https://clang.llvm.org/docs/ClangFormat.html) is part of LLVM and can automatically format your code for you, because ain't nobody got time to do it manually. We supply a configuration file for it that applies most of the coding conventions listed above. It will only change whitespace and newlines, so you will still have to remember to include optional braces yourself.
+
+Use the [full LLVM installer](http://llvm.org/builds/) to get clang-format on Windows, or use `sudo apt install clang-format` on Ubuntu.
+
+If you run it from the command-line, pass `-style=file` as an option and it will automatically find the .clang-format configuration file in the QMK root directory.
+
+If you use VSCode, the standard C/C++ plugin supports clang-format, alternatively there is a [separate extension](https://marketplace.visualstudio.com/items?itemName=LLVMExtensions.ClangFormat) for it.
+
+Some things (like LAYOUT macros) are destroyed by clang-format, so either don't run it on those files, or wrap the sensitive code in `// clang-format off` and `// clang-format on`.
+
 # General Guidelines
 
 We have a few different types of changes in QMK, each requiring a different level of rigor. We'd like you to keep the following guidelines in mind no matter what type of change you're making.
@@ -117,6 +129,20 @@ Documentation is one of the easiest ways to get started contributing to QMK. Fin
 
 You'll find all our documentation in the `qmk_firmware/docs` directory, or if you'd rather use a web based workflow you can click "Suggest An Edit" at the top of each page on http://docs.qmk.fm/.
 
+When providing code examples in your documentation, try to observe naming conventions used elsewhere in the docs. For example, standardizing enums as `my_layers` or `my_keycodes` for consistency:
+
+```c
+enum my_layers {
+  _FIRST_LAYER,
+  _SECOND_LAYER
+};
+
+enum my_keycodes {
+  FIRST_LAYER = SAFE_RANGE,
+  SECOND_LAYER
+};
+```
+
 ## Keymaps
 
 Most first-time QMK contributors start with their personal keymaps. We try to keep keymap standards pretty casual (keymaps, after all, reflect the personality of their creators) but we do ask that you follow these guidelines to make it easier for others to discover and learn from your keymap.
@@ -125,7 +151,7 @@ Most first-time QMK contributors start with their personal keymaps. We try to ke
 * All Keymap PR's are squashed, so if you care about how your commits are squashed you should do it yourself
 * Do not lump features in with keymap PR's. Submit the feature first and then a second PR for the keymap.
 * Do not include `Makefile`s in your keymap folder (they're no longer used)
-* Update copyrights in file headers (look for `REPLACE_WITH_YOUR_NAME `)
+* Update copyrights in file headers (look for `%YOUR_NAME%`)
 
 ## Keyboards
 
@@ -138,7 +164,7 @@ We also ask that you follow these guidelines:
 * Do not lump core features in with new keyboards. Submit the feature first and then submit a separate PR for the keyboard.
 * Name `.c`/`.h` file after the immediate parent folder, eg `/keyboards/<kb1>/<kb2>/<kb2>.[ch]`
 * Do not include `Makefile`s in your keyboard folder (they're no longer used)
-* Update copyrights in file headers (look for `REPLACE_WITH_YOUR_NAME `)
+* Update copyrights in file headers (look for `%YOUR_NAME%`)
 
 ## Quantum/TMK Core
 

docs/custom_quantum_functions.md

@@ -90,7 +90,7 @@ keyrecord_t record {
 
 # LED Control
 
-This allows you to control the 5 LED's defined as part of the USB Keyboard spec. It will be called when the state of one of those 5 LEDs changes.
+QMK provides methods to read the 5 LEDs defined as part of the HID spec:
 
 * `USB_LED_NUM_LOCK`
 * `USB_LED_CAPS_LOCK`
@@ -98,34 +98,47 @@ This allows you to control the 5 LED's defined as part of the USB Keyboard spec.
 * `USB_LED_COMPOSE`
 * `USB_LED_KANA`
 
+These five constants correspond to the positional bits of the host LED state.
+There are two ways to get the host LED state:
+
+* by implementing `led_set_user()`
+* by calling `host_keyboard_leds()`
+
+## `led_set_user()`
+
+This function will be called when the state of one of those 5 LEDs changes. It receives the LED state as a parameter.
+Use the `IS_LED_ON(usb_led, led_name)` and `IS_LED_OFF(usb_led, led_name)` macros to check the LED status.
+
+!> `host_keyboard_leds()` may already reflect a new value before `led_set_user()` is called.
+
 ### Example `led_set_user()` Implementation
 
 ```c
 void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        PORTB |= (1<<0);
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinLow(B0);
     } else {
-        PORTB &= ~(1<<0);
+        writePinHigh(B0);
     }
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        PORTB |= (1<<1);
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        writePinLow(B1);
     } else {
-        PORTB &= ~(1<<1);
+        writePinHigh(B1);
     }
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-        PORTB |= (1<<2);
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+        writePinLow(B2);
     } else {
-        PORTB &= ~(1<<2);
+        writePinHigh(B2);
     }
-    if (usb_led & (1<<USB_LED_COMPOSE)) {
-        PORTB |= (1<<3);
+    if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) {
+        writePinLow(B3);
     } else {
-        PORTB &= ~(1<<3);
+        writePinHigh(B3);
     }
-    if (usb_led & (1<<USB_LED_KANA)) {
-        PORTB |= (1<<4);
+    if (IS_LED_ON(usb_led, USB_LED_KANA)) {
+        writePinLow(B4);
     } else {
-        PORTB &= ~(1<<4);
+        writePinHigh(B4);
     }
 }
 ```
@@ -135,32 +148,103 @@ void led_set_user(uint8_t usb_led) {
 * Keyboard/Revision: `void led_set_kb(uint8_t usb_led)`
 * Keymap: `void led_set_user(uint8_t usb_led)`
 
+## `host_keyboard_leds()`
 
-# Matrix Initialization Code
+Call this function to get the last received LED state. This is useful for reading the LED state outside `led_set_*`, e.g. in [`matrix_scan_user()`](#matrix-scanning-code).
+For convenience, you can use the `IS_HOST_LED_ON(led_name)` and `IS_HOST_LED_OFF(led_name)` macros instead of calling and checking `host_keyboard_leds()` directly.
 
-Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i&#xb2;c controllers you will need to set up that hardware before it can be used.
+## Setting Physical LED State
 
+Some keyboard implementations provide convenience methods for setting the state of the physical LEDs.
 
-### Example `matrix_init_user()` Implementation
+### Ergodox Boards
 
-This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
+The Ergodox implementations provide `ergodox_right_led_1`/`2`/`3_on`/`off()` to turn individual LEDs on or off, as well as `ergodox_right_led_on`/`off(uint8_t led)` to turn them on or off by their index.
+
+In addition, it is possible to specify the brightness level of all LEDs with `ergodox_led_all_set(uint8_t n)`; of individual LEDs with `ergodox_right_led_1`/`2`/`3_set(uint8_t n)`; or by index with `ergodox_right_led_set(uint8_t led, uint8_t n)`.
+
+Ergodox boards also define `LED_BRIGHTNESS_LO` for the lowest brightness and `LED_BRIGHTNESS_HI` for the highest brightness (which is the default).
+
+# Keyboard Initialization Code
+
+There are several steps in the keyboard initialization process.  Depending on what you want to do, it will influence which function you should use.
+
+These are the three main initialization functions, listed in the order that they're called.
+
+* `keyboard_pre_init_*` - Happens before most anything is started. Good for hardware setup that you want running very early.
+* `matrix_init_*` - Happens midway through the firmware's startup process. Hardware is initialized, but features may not be yet.
+* `keyboard_post_init_*` - Happens at the end of the firmware's startup process. This is where you'd want to put "customization" code, for the most part.
+
+!> For most people, the `keyboard_post_init_user` function is what you want to call.  For instance, this is where you want to set up things for RGB Underglow.
+
+## Keyboard Pre Initialization code
+
+This runs very early during startup, even before the USB has been started. 
+
+Shortly after this, the matrix is initialized.
+
+For most users, this shouldn't be used, as it's primarily for hardware oriented initialization. 
+
+However, if you have hardware stuff that you need initialized, this is the best place for it (such as initializing LED pins).
+
+### Example `keyboard_pre_init_user()` Implementation
+
+This example, at the keyboard level, sets up B0, B1, B2, B3, and B4 as LED pins.
 
 ```c
-void matrix_init_user(void) {
-  // Call the keymap level matrix init.
+void keyboard_pre_init_user(void) {
+  // Call the keyboard pre init code.
 
   // Set our LED pins as output
-  DDRB |= (1<<1);
-  DDRB |= (1<<2);
-  DDRB |= (1<<3);
+  setPinOutput(B0);
+  setPinOutput(B1);
+  setPinOutput(B2);
+  setPinOutput(B3);
+  setPinOutput(B4);
 }
 ```
 
+### `keyboard_pre_init_*` Function Documentation
+
+* Keyboard/Revision: `void keyboard_pre_init_kb(void)`
+* Keymap: `void keyboard_pre_init_user(void)`
+
+## Matrix Initialization Code
+
+This is called when the matrix is initialized, and after some of the hardware has been set up, but before many of the features have been initialized. 
+
+This is useful for setting up stuff that you may need elsewhere, but isn't hardware related nor is dependant on where it's started. 
+
+
 ### `matrix_init_*` Function Documentation
 
 * Keyboard/Revision: `void matrix_init_kb(void)`
 * Keymap: `void matrix_init_user(void)`
 
+
+## Keyboard Post Initialization code
+
+This is ran as the very last task in the keyboard initialization process. This is useful if you want to make changes to certain features, as they should be initialized by this point.
+
+
+### Example `keyboard_post_init_user()` Implementation
+
+This example, running after everything else has initialized, sets up the rgb underglow configuration.
+
+```c
+void keyboard_post_init_user(void) {
+  // Call the post init code.
+  rgblight_enable_noeeprom(); // enables Rgb, without saving settings
+  rgblight_sethsv_noeeprom(180, 255, 255); // sets the color to teal/cyan without saving
+  rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3); // sets mode to Fast breathing without saving
+}
+```
+
+### `keyboard_post_init_*` Function Documentation
+
+* Keyboard/Revision: `void keyboard_post_init_kb(void)`
+* Keymap: `void keyboard_post_init_user(void)`
+
 # Matrix Scanning Code
 
 Whenever possible you should customize your keyboard by using `process_record_*()` and hooking into events that way, to ensure that your code does not have a negative performance impact on your keyboard. However, in rare cases it is necessary to hook into the matrix scanning. Be extremely careful with the performance of code in these functions, as it will be called at least 10 times per second.
@@ -176,7 +260,7 @@ This example has been deliberately omitted. You should understand enough about Q
 
 This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot.
 
-You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LED's or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
+You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LEDs or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
 
 
 # Keyboard Idling/Wake Code
@@ -188,22 +272,18 @@ This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_
 
 ### Example suspend_power_down_user() and suspend_wakeup_init_user() Implementation
 
-This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
 
 ```c
-void suspend_power_down_user(void)
-{
+void suspend_power_down_user(void) {
     rgb_matrix_set_suspend_state(true);
 }
 
-void suspend_wakeup_init_user(void)
-{
+void suspend_wakeup_init_user(void) {
     rgb_matrix_set_suspend_state(false);
 }
-
 ```
 
-### `keyboard_init_*` Function Documentation
+### Keyboard suspend/wake  Function Documentation
 
 * Keyboard/Revision: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
 * Keymap: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
@@ -240,9 +320,10 @@ uint32_t layer_state_set_user(uint32_t state) {
 ```
 ### `layer_state_set_*` Function Documentation
 
-* Keyboard/Revision: `void uint32_t layer_state_set_kb(uint32_t state)`
+* Keyboard/Revision: `uint32_t layer_state_set_kb(uint32_t state)`
 * Keymap: `uint32_t layer_state_set_user(uint32_t state)`
 
+
 The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)
 
 
@@ -256,13 +337,13 @@ Keep in mind that EEPROM has a limited number of writes. While this is very high
 
 * If you don't understand the example, then you may want to avoid using this feature, as it is rather complicated. 
 
-### Example  Implementation
+### Example Implementation
 
 This is an example of how to add settings, and read and write it. We're using the user keymap for the example here.  This is a complex function, and has a lot going on.  In fact, it uses a lot of the above functions to work! 
 
 
 In your keymap.c file, add this to the top:
-```
+```c
 typedef union {
   uint32_t raw;
   struct {
@@ -275,11 +356,11 @@ user_config_t user_config;
 
 This sets up a 32 bit structure that we can store settings with in memory, and write to the EEPROM. Using this removes the need to define variables, since they're defined in this structure. Remember that `bool` (boolean) values use 1 bit, `uint8_t` uses 8 bits, `uint16_t` uses up 16 bits.  You can mix and match, but changing the order can cause issues, as it will change the values that are read and written. 
 
-We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `matrix_init_user` and `process_record_user` to configure everything. 
+We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `keyboard_post_init_user` and `process_record_user` to configure everything. 
 
-Now, using the `matrix_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap.  And It should look like: 
-```
-void matrix_init_user(void) {
+Now, using the `keyboard_post_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap.  And It should look like: 
+```c
+void keyboard_post_init_user(void) {
   // Call the keymap level matrix init.
 
   // Read the user config from EEPROM
@@ -295,7 +376,7 @@ void matrix_init_user(void) {
 ```
 The above function will use the EEPROM config immediately after reading it, to set the default layer's RGB color. The "raw" value of it is converted in a usable structure based on the "union" that you created above. 
 
-```
+```c
 uint32_t layer_state_set_user(uint32_t state) {
     switch (biton32(state)) {
     case _RAISE:
@@ -317,8 +398,8 @@ uint32_t layer_state_set_user(uint32_t state) {
   return state;
 }
 ```
-This will cause the RGB underglow to be changed ONLY if the value was enabled.  Now to configure this value, create a new keycode for `process_record_user` called `RGB_LYR` and `EPRM`. Additionally, we want to make sure that if you use the normal RGB codes, that it turns off  Using the example above, make it look this:
-```
+This will cause the RGB underglow to be changed ONLY if the value was enabled.  Now to configure this value, create a new keycode for `process_record_user` called `RGB_LYR`. Additionally, we want to make sure that if you use the normal RGB codes, that it turns off  Using the example above, make it look this:
+```c
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
@@ -335,11 +416,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             PLAY_NOTE_ARRAY(tone_qwerty);
         }
         return true; // Let QMK send the enter press/release events
-    case EPRM:
-        if (record->event.pressed) {
-            eeconfig_init(); // resets the EEPROM to default
-        }
-        return false;
     case RGB_LYR:  // This allows me to use underglow as layer indication, or as normal
         if (record->event.pressed) { 
             user_config.rgb_layer_change ^= 1; // Toggles the status
@@ -362,10 +438,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
 }
 ```
-And lastly, you want to add the `eeconfig_init_user` function, so that when the EEPROM is reset, you can specify default values, and even custom actions. For example, if you want to set rgb layer indication by default, and save the default valued. 
+And lastly, you want to add the `eeconfig_init_user` function, so that when the EEPROM is reset, you can specify default values, and even custom actions. To force an EEPROM reset, use the `EEP_RST` keycode or [Bootmagic](feature_bootmagic.md) functionallity. For example, if you want to set rgb layer indication by default, and save the default valued. 
 
-```
+```c
 void eeconfig_init_user(void) {  // EEPROM is getting reset! 
+  user_config.raw = 0;
   user_config.rgb_layer_change = true; // We want this enabled by default
   eeconfig_update_user(user_config.raw); // Write default value to EEPROM now
 
@@ -384,3 +461,31 @@ And you're done.  The RGB layer indication will only work if you want it to. And
 * Keymap: `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)` and `void eeconfig_update_user(uint32_t val)`
 
 The `val` is the value of the data that you want to write to EEPROM.  And the `eeconfig_read_*` function return a 32 bit (DWORD) value from the EEPROM. 
+
+# Custom Tapping Term
+
+By default, the tapping term is defined globally, and is not configurable by key.  For most users, this is perfectly fine.  But in come cases, dual function keys would be greatly improved by different timeouts than `LT` keys, or because some keys may be easier to hold than others.  Instead of using custom key codes for each, this allows for per key configurable `TAPPING_TERM`.
+
+To enable this functionality, you need to add `#define TAPPING_TERM_PER_KEY` to your `config.h`, first.  
+
+
+## Example `get_tapping_term` Implementation
+
+To change the `TAPPING TERM` based on the keycode, you'd want to add something like the following to your `keymap.c` file: 
+
+```c
+uint16_t get_tapping_term(uint16_t keycode) {
+  switch (keycode) {
+    case SFT_T(KC_SPC):
+      return TAPPING_TERM + 1250;
+    case LT(1, KC_GRV):
+      return 130;
+    default:
+      return TAPPING_TERM;
+  }
+}
+```
+
+### `get_tapping_term` Function Documentation
+
+Unlike many of the other functions here, there isn't a need (or even reason) to have a quantum or keyboard level function. Only a user level function is useful here, so no need to mark it as such.

docs/faq_build.md

@@ -15,7 +15,7 @@ or just:
 
     $ sudo make <keyboard>:<keymap>:dfu
 
-Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
+Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible.
 
 ### Linux `udev` Rules
 On Linux, you'll need proper privileges to access the MCU. You can either use
@@ -36,14 +36,29 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 # tmk keyboard products     https://github.com/tmk/tmk_keyboard
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
+**/etc/udev/rules.d/54-input-club-keyboard.rules:**
+
+```
+# Input Club keyboard bootloader
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
+```
+
+### Serial device is not detected in bootloader mode on Linux
+Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
+Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
 
 ## Unknown Device for DFU Bootloader
 
-If you're using Windows to flash your keyboard, and you are running into issues, check the Device Manager.  If you see an "Unknown Device" when the keyboard is in "bootloader mode", then you may have a driver issue. 
+If you're using Windows to flash your keyboard, and you are running into issues, check the Device Manager.  If you see an "Unknown Device" when the keyboard is in "bootloader mode", then you may have a driver issue.
 
-Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue. 
+Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue.
+
+If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUSB` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again.  If that doesn't work, try all of the options, until one works. 
+
+?> There isn't a best option for which driver should be used here.  Some options work better on some systems than others.  libUSB and WinUSB seem to be the best options here.
+
+If the bootloader doesn't show up in the list for devices, you may need to enable the "List all devices" option in the `Options` menu, and then find the bootloader in question. 
 
-If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUS(libusb-1.0)` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again. 
 
 ## WINAVR is Obsolete
 It is no longer recommended and may cause some problem.
@@ -98,9 +113,9 @@ OPT_DEFS += -DBOOTLOADER_SIZE=2048
 ```
 
 ## `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` on MacOS
-This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled. 
+This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled.
 
-The solution is to remove and reinstall all affected modules. 
+The solution is to remove and reinstall all affected modules.
 
 ```
 brew rm avr-gcc
@@ -128,3 +143,11 @@ brew uninstall --force avr-gcc
 brew install avr-gcc@7
 brew link --force avr-gcc@7
 ```
+
+### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019)
+Due to how EEPROM works on ARM based chips, saved settings may no longer be valid.  This affects the default layers, and *may*, under certain circumstances we are still figuring out, make the keyboard unusable.  Resetting the EEPROM will correct this.
+
+[Planck rev6 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/539284620861243409/planck_rev6_default.bin) can be used to force an eeprom reset. After flashing this image, flash your normal firmware again which should restore your keyboard to _normal_ working order.
+[Preonic rev3 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/537849497313738762/preonic_rev3_default.bin)
+
+If bootmagic is enabled in any form, you should be able to do this too (see [Bootmagic docs](feature_bootmagic.md) and keyboard info for specifics on how to do this).

docs/faq_keymap.md

@@ -151,13 +151,13 @@ This turns right modifier keys into arrow keys when the keys are tapped while st
  */
 const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty */
-    [0] = KEYMAP( \
+    [0] = LAYOUT( \
         ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS,BSPC, \
         TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
         LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \
         LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,FN0, ESC, \
         FN4, LGUI,LALT,          SPC,                     APP, FN2, FN1, FN3),
-    [1] = KEYMAP( \
+    [1] = LAYOUT( \
         GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, TRNS,TRNS, \
         TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
         TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \

docs/feature_advanced_keycodes.md

@@ -11,21 +11,21 @@ People often define custom names using `#define`. For example:
 #define ALT_TAB LALT(KC_TAB)
 ```
 
-This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping it more readable.
+This will allow you to use `FN_CAPS` and `ALT_TAB` in your keymap, keeping it more readable.
 
 ## Caveats
 
-Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored.
+Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored. If you need to apply modifiers to your tapped keycode, [Tap Dance](https://github.com/qmk/qmk_firmware/blob/master/docs/feature_tap_dance.md#example-5-using-tap-dance-for-advanced-mod-tap-and-layer-tap-keys) can be used to accomplish this.
 
 Additionally, if at least one right-handed modifier is specified in a Mod Tap or Layer Tap, it will cause all modifiers specified to become right-handed, so it is not possible to mix and match the two.
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers)
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers). When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
-* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
+* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers: `MOD_LCTL`, `MOD_LSFT`, `MOD_LALT`, `MOD_LGUI` (note the use of `MOD_` constants instead of `KC_`). These modifiers can be combined using bitwise OR, e.g. `LM(_RAISE, MOD_LCTL | MOD_LALT)`.
 * `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
 * `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys](#one-shot-keys) for details and additional functionality.
 * `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
@@ -60,21 +60,21 @@ Sometimes, you might want to switch between layers in a macro or as part of a ta
 
 These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.
 
-|Key       |Aliases               |Description                                         |
-|----------|----------------------|----------------------------------------------------|
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|                      |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|Key       |Aliases                        |Description                                         |
+|----------|-------------------------------|----------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
 
 You can also chain them, for example `LCTL(LALT(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.
 
@@ -92,7 +92,7 @@ The modifiers this keycode and `OSM()` accept are prefixed with `MOD_`, not `KC_
 |`MOD_LGUI`|Left GUI (Windows/Command/Meta key)     |
 |`MOD_RCTL`|Right Control                           |
 |`MOD_RSFT`|Right Shift                             |
-|`MOD_RALT`|Right Alt                               |
+|`MOD_RALT`|Right Alt (AltGr)                       |
 |`MOD_RGUI`|Right GUI (Windows/Command/Meta key)    |
 |`MOD_HYPR`|Hyper (Left Control, Shift, Alt and GUI)|
 |`MOD_MEH` |Meh (Left Control, Shift, and Alt)      |
@@ -107,23 +107,23 @@ This key would activate Left Control and Left Shift when held, and send Escape w
 
 For convenience, QMK includes some Mod-Tap shortcuts to make common combinations more compact in your keymap:
 
-|Key         |Aliases                                |Description                                            |
-|------------|---------------------------------------|-------------------------------------------------------|
-|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
-|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
-|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
-|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
-|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
-|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
-|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
-|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
+|Key         |Aliases                                                          |Description                                            |
+|------------|-----------------------------------------------------------------|-------------------------------------------------------|
+|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
+|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
+|`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
+|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 
 ## Caveats
 
@@ -146,7 +146,7 @@ Additionally, hitting keys five times in a short period will lock that key. This
 You can control the behavior of one shot keys by defining these in `config.h`:
 
 ```c
-#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped this number of times again. */
+#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped once again. */
 #define ONESHOT_TIMEOUT 5000  /* Time (in ms) before the one shot key is released */
 ```
 
@@ -161,8 +161,88 @@ For one shot mods, you need to call `set_oneshot_mods(MOD)` to set it, or `clear
 
 !> If you're having issues with OSM translating over Remote Desktop Connection, this can be fixed by opening the settings, going to the "Local Resources" tap, and in the keyboard section, change the drop down to "On this Computer".  This will fix the issue and allow OSM to function properly over Remote Desktop.
 
+## Callbacks
 
-# Permissive Hold
+When you'd like to perform custom logic when pressing a one shot key, there are several callbacks you can choose to implement. You could indicate changes in one shot keys by flashing an LED or making a sound, for example.
+
+There is a callback for `OSM(mod)`. It is called whenever the state of any one shot modifier key is changed: when it toggles on, but also when it is toggled off. You can use it like this:
+
+```c
+void oneshot_mods_changed_user(uint8_t mods) {
+  if (mods & MOD_MASK_SHIFT) {
+    println("Oneshot mods SHIFT");
+  }
+  if (mods & MOD_MASK_CTRL) {
+    println("Oneshot mods CTRL");
+  }
+  if (mods & MOD_MASK_ALT) {
+    println("Oneshot mods ALT");
+  }
+  if (mods & MOD_MASK_GUI) {
+    println("Oneshot mods GUI");
+  }
+  if (!mods) {
+    println("Oneshot mods off");
+  }
+}
+```
+
+The `mods` argument contains the active mods after the change, so it reflects the current state.
+
+When you use One Shot Tap Toggle (by adding `#define ONESHOT_TAP_TOGGLE 2` in your `config.h` file), you may lock a modifier key by pressing it the specified amount of times. There's a callback for that, too:
+
+```c
+void oneshot_locked_mods_changed_user(uint8_t mods) {
+  if (mods & MOD_MASK_SHIFT) {
+    println("Oneshot locked mods SHIFT");
+  }
+  if (mods & MOD_MASK_CTRL) {
+    println("Oneshot locked mods CTRL");
+  }
+  if (mods & MOD_MASK_ALT) {
+    println("Oneshot locked mods ALT");
+  }
+  if (mods & MOD_MASK_GUI) {
+    println("Oneshot locked mods GUI");
+  }
+  if (!mods) {
+    println("Oneshot locked mods off");
+  }
+}
+```
+
+Last, there is also a callback for the `OSL(layer)` one shot key:
+
+```c
+void oneshot_layer_changed_user(uint8_t layer) {
+  if (layer == 1) {
+    println("Oneshot layer 1 on");
+  }
+  if (!layer) {
+    println("Oneshot layer off");
+  }
+}
+```
+
+If any one shot layer is switched off, `layer` will be zero. When you're looking to do something on any layer change instead of one shot layer changes, `layer_state_set_user` is a better callback to use.
+
+If you are making your own keyboard, there are also `_kb` equivalent functions:
+
+```c
+void oneshot_locked_mods_changed_kb(uint8_t mods);
+void oneshot_mods_changed_kb(uint8_t mods);
+void oneshot_layer_changed_kb(uint8_t layer);
+```
+
+As with any callback, be sure to call the `_user` variant to allow for further customizability.
+
+# Tap-Hold Configuration Options
+
+While Tap-Hold options are fantastic, they are not without their issues.  We have tried to configure them with reasonal defaults, but that may still cause issues for some people. 
+
+These options let you modify the behavior of the Tap-Hold keys.
+
+## Permissive Hold
 
 As of [PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/), there is a new `config.h` option:
 
@@ -185,7 +265,7 @@ Normally, if you do all this within the `TAPPING_TERM` (default: 200ms) this wil
 
 ?> If you have `Ignore Mod Tap Interrupt` enabled, as well, this will modify how both work. The regular key has the modifier added if the first key is released first or if both keys are held longer than the `TAPPING_TERM`.
 
-# Ignore Mod Tap Interrupt
+## Ignore Mod Tap Interrupt
 
 To enable this setting, add this to your `config.h`:
 
@@ -211,7 +291,7 @@ Normally, this would send `X` (`SHIFT`+`x`). With `Ignore Mod Tap Interrupt` ena
 
 ?> If you have `Permissive Hold` enabled, as well, this will modify how both work. The regular key has the modifier added if the first key is released first or if both keys are held longer than the `TAPPING_TERM`.
 
-# Tapping Force Hold
+## Tapping Force Hold
 
 To enable `tapping force hold`, add the following to your `config.h`: 
 
@@ -235,7 +315,7 @@ With `TAPPING_FORCE_HOLD`, the second press will be interpreted as a Shift, allo
 
 !> `TAPPING_FORCE_HOLD` will break anything that uses tapping toggles (Such as the `TT` layer keycode, and the One Shot Tapping Toggle).
 
-# Retro Tapping
+## Retro Tapping
 
 To enable `retro tapping`, add the following to your `config.h`: 
 

docs/feature_audio.md

@@ -61,9 +61,11 @@ It's advised that you wrap all audio features in `#ifdef AUDIO_ENABLE` / `#endif
 
 The available keycodes for audio are: 
 
-* `AU_ON` - Turn audio mode on
-* `AU_OFF` - Turn audio mode off
-* `AU_TOG` - Toggle audio mode
+* `AU_ON` - Turn Audio Feature on
+* `AU_OFF` - Turn Audio Feature off
+* `AU_TOG` - Toggle Audio Feature state
+
+!> These keycodes turn all of the audio functionality on and off.  Turning it off means that audio feedback, audio clicky, music mode, etc. are disabled, completely. 
 
 ## ARM Audio Volume
 
@@ -98,6 +100,16 @@ In music mode, the following keycodes work differently, and don't pass through:
 * `KC_UP` - speed-up playback
 * `KC_DOWN` - slow-down playback
 
+The pitch standard (`PITCH_STANDARD_A`) is 440.0f by default - to change this, add something like this to your `config.h`:
+
+    #define PITCH_STANDARD_A 432.0f
+
+You can completely disable Music Mode as well. This is useful, if you're pressed for space on your controller.  To disable it, add this to your `config.h`:
+
+    #define NO_MUSIC_MODE
+
+### Music Mask
+
 By default, `MUSIC_MASK` is set to `keycode < 0xFF` which means keycodes less than `0xFF` are turned into notes, and don't output anything. You can change this by defining this in your `config.h` like this:
 
     #define MUSIC_MASK keycode != KC_NO
@@ -118,13 +130,26 @@ For a more advanced way to control which keycodes should still be processed, you
 
 Things that return false are not part of the mask, and are always processed.
 
-The pitch standard (`PITCH_STANDARD_A`) is 440.0f by default - to change this, add something like this to your `config.h`:
+### Music Map
 
-    #define PITCH_STANDARD_A 432.0f
+By default, the Music Mode uses the columns and row to determine the scale for the keys. For a board that uses a rectangular matrix that matches the keyboard layout, this is just fine.  However, for boards that use a more complicated matrix (such as the Planck Rev6, or many split keyboards) this would result in a very skewed experience.  
 
-You can completely disable Music Mode as well. This is useful, if you're pressed for space on your controller.  To disable it, add this to your `config.h`:
+However, the Music Map option allows you to remap the scaling for the music mode, so it fits the layout, and is more natural. 
 
-    #define NO_MUSIC_MODE
+To enable this feature, add `#define MUSIC_MAP` to your `config.h` file, and then you will want to add a `uint8_t music_map` to your keyboard's `c` file, or your `keymap.c`.
+
+```c
+const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT_ortho_4x12(
+	36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+	24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35,
+	12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
+	 0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11
+);
+```
+
+You will want to use whichever `LAYOUT` macro that your keyboard uses here.  This maps it to the correct key location.  Start in  the bottom left of the keyboard layout, and  move to the right, and then upwards.  Fill in all the entries until you have a complete matrix.  
+
+You can look at the [Planck Keyboard](https://github.com/qmk/qmk_firmware/blob/e9ace1487887c1f8b4a7e8e6d87c322988bec9ce/keyboards/planck/planck.c#L24-L29) as an example of how to implement this. 
 
 ## Audio Click
 
@@ -158,7 +183,7 @@ You can configure the default, min and max frequencies, the stepping and built i
 
 ## MIDI Functionality
 
-This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile.
+This is still a WIP, but check out `quantum/process_keycode/process_midi.c` to see what's happening. Enable from the Makefile.
 
 
 ## Audio Keycodes

docs/feature_backlight.md

@@ -40,6 +40,7 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
 |---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
 |`BACKLIGHT_PIN`      |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
 |`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 15 excluding off)                                                   |
+|`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                             |
 |`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if hardware PWM is used                                                          |
 |`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
 

docs/feature_bootmagic.md

@@ -127,7 +127,9 @@ Additionally, you may want to specify which key to use.  This is especially usef
 
 By default, these are set to 0 and 0, which is usually the "ESC" key on a majority of keyboards.
 
-And to trigger the bootloader, you hold this key down when plugging the keyboard in. Just the single key. 
+And to trigger the bootloader, you hold this key down when plugging the keyboard in. Just the single key.
+
+!> Using bootmagic lite will **always reset** the EEPROM, so you will lose any settings that have been saved.
 
 ## Advanced Bootmagic Lite
 

docs/feature_combo.md

@@ -19,7 +19,6 @@ combo_t key_combos[COMBO_COUNT] = {COMBO(test_combo, KC_ESC)};
 This will send "Escape" if you hit the A and B keys.
 
 !> This method only supports [basic keycodes](keycodes_basic.md). See the examples for more control.
-!> You cannot reuse (share) keys in combos. Each key should only belong to a single combo.  
 
 ## Examples
 
@@ -29,7 +28,7 @@ If you want to add a list, then you'd use something like this:
 enum combos {
   AB_ESC,
   JK_TAB
-}
+};
 const uint16_t PROGMEM ab_combo[] = {KC_A, KC_B, COMBO_END};
 const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END};
 

docs/feature_command.md

@@ -16,35 +16,36 @@ To use Command, hold down the key combination defined by the `IS_COMMAND()` macr
 
 If you would like to change the key assignments for Command, `#define` these in your `config.h` at either the keyboard or keymap level. All keycode assignments here must omit the `KC_` prefix.
 
-|Define                              |Default                                                                               |Description                                     |
-|------------------------------------|--------------------------------------------------------------------------------------|------------------------------------------------|
-|`IS_COMMAND()`                      |<code>(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                                |Set default layer with the Function row         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                                |Set default layer with the number keys          |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                               |Set default layer with `MAGIC_KEY_LAYER0..9`    |
-|`MAGIC_KEY_DEBUG`                   |`D`                                                                                   |Toggle debugging over serial                    |
-|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                                   |Toggle key matrix debugging                     |
-|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                                   |Toggle keyboard debugging                       |
-|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                                   |Toggle mouse debugging                          |
-|`MAGIC_KEY_CONSOLE`                 |`C`                                                                                   |Enable the Command console                      |
-|`MAGIC_KEY_VERSION`                 |`V`                                                                                   |Print the running QMK version to the console    |
-|`MAGIC_KEY_STATUS`                  |`S`                                                                                   |Print the current keyboard status to the console|
-|`MAGIC_KEY_HELP1`                   |`H`                                                                                   |Print Command help to the console               |
-|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                               |Print Command help to the console (alternate)   |
-|`MAGIC_KEY_LAYER0`                  |`0`                                                                                   |Make layer 0 the default layer                  |
-|`MAGIC_KEY_LAYER1`                  |`1`                                                                                   |Make layer 1 the default layer                  |
-|`MAGIC_KEY_LAYER2`                  |`2`                                                                                   |Make layer 2 the default layer                  |
-|`MAGIC_KEY_LAYER3`                  |`3`                                                                                   |Make layer 3 the default layer                  |
-|`MAGIC_KEY_LAYER4`                  |`4`                                                                                   |Make layer 4 the default layer                  |
-|`MAGIC_KEY_LAYER5`                  |`5`                                                                                   |Make layer 5 the default layer                  |
-|`MAGIC_KEY_LAYER6`                  |`6`                                                                                   |Make layer 6 the default layer                  |
-|`MAGIC_KEY_LAYER7`                  |`7`                                                                                   |Make layer 7 the default layer                  |
-|`MAGIC_KEY_LAYER8`                  |`8`                                                                                   |Make layer 8 the default layer                  |
-|`MAGIC_KEY_LAYER9`                  |`9`                                                                                   |Make layer 9 the default layer                  |
-|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                                 |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                               |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                               |Enter the bootloader                            |
-|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                                |Lock the keyboard so nothing can be typed       |
-|`MAGIC_KEY_EEPROM`                  |`E`                                                                                   |Clear the EEPROM                                |
-|`MAGIC_KEY_NKRO`                    |`N`                                                                                   |Toggle N-Key Rollover (NKRO)                    |
-|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                                   |Toggle LED when computer is sleeping            |
+|Define                              |Default                                                                    |Description                                     |
+|------------------------------------|---------------------------------------------------------------------------|------------------------------------------------|
+|`IS_COMMAND()`                      |<code>(get_mods() == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                     |Set default layer with the Function row         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                     |Set default layer with the number keys          |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                    |Set default layer with `MAGIC_KEY_LAYER0..9`    |
+|`MAGIC_KEY_DEBUG`                   |`D`                                                                        |Toggle debugging over serial                    |
+|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                        |Toggle key matrix debugging                     |
+|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                        |Toggle keyboard debugging                       |
+|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                        |Toggle mouse debugging                          |
+|`MAGIC_KEY_CONSOLE`                 |`C`                                                                        |Enable the Command console                      |
+|`MAGIC_KEY_VERSION`                 |`V`                                                                        |Print the running QMK version to the console    |
+|`MAGIC_KEY_STATUS`                  |`S`                                                                        |Print the current keyboard status to the console|
+|`MAGIC_KEY_HELP`                    |`H`                                                                        |Print Command help to the console               |
+|`MAGIC_KEY_HELP_ALT`                |`SLASH`                                                                    |Print Command help to the console (alternate)   |
+|`MAGIC_KEY_LAYER0`                  |`0`                                                                        |Make layer 0 the default layer                  |
+|`MAGIC_KEY_LAYER0_ALT`              |`GRAVE`                                                                    |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_LAYER1`                  |`1`                                                                        |Make layer 1 the default layer                  |
+|`MAGIC_KEY_LAYER2`                  |`2`                                                                        |Make layer 2 the default layer                  |
+|`MAGIC_KEY_LAYER3`                  |`3`                                                                        |Make layer 3 the default layer                  |
+|`MAGIC_KEY_LAYER4`                  |`4`                                                                        |Make layer 4 the default layer                  |
+|`MAGIC_KEY_LAYER5`                  |`5`                                                                        |Make layer 5 the default layer                  |
+|`MAGIC_KEY_LAYER6`                  |`6`                                                                        |Make layer 6 the default layer                  |
+|`MAGIC_KEY_LAYER7`                  |`7`                                                                        |Make layer 7 the default layer                  |
+|`MAGIC_KEY_LAYER8`                  |`8`                                                                        |Make layer 8 the default layer                  |
+|`MAGIC_KEY_LAYER9`                  |`9`                                                                        |Make layer 9 the default layer                  |
+|`MAGIC_KEY_BOOTLOADER`              |`B`                                                                        |Jump to bootloader                              |
+|`MAGIC_KEY_BOOTLOADER_ALT`          |`ESC`                                                                      |Jump to bootloader (alternate)                  |
+|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                     |Lock the keyboard so nothing can be typed       |
+|`MAGIC_KEY_EEPROM`                  |`E`                                                                        |Print stored EEPROM config to the console       |
+|`MAGIC_KEY_EEPROM_CLEAR`            |`BSPACE`                                                                   |Clear the EEPROM                                |
+|`MAGIC_KEY_NKRO`                    |`N`                                                                        |Toggle N-Key Rollover (NKRO)                    |
+|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                        |Toggle LED when computer is sleeping            |

docs/feature_debounce_type.md

@@ -0,0 +1,42 @@
+# Debounce algorithm
+
+QMK supports multiple debounce algorithms through its debounce API.
+
+The logic for which debounce method called is below. It checks various defines that you have set in rules.mk
+
+```
+DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
+DEBOUNCE_TYPE?= sym_g
+ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
+endif
+```
+
+# Debounce selection
+
+| DEBOUNCE_TYPE    | Description                                          | What else is needed           |
+| -------------    | ---------------------------------------------------  | ----------------------------- |
+| Not defined      | Use the default algorithm, currently sym_g           | Nothing                       |
+| custom           | Use your own debounce.c                              | ```SRC += debounce.c``` add your own debounce.c and implement necessary functions |
+| anything_else    | Use another algorithm from quantum/debounce/*        | Nothing                       |
+
+**Regarding split keyboards**:
+The debounce code is compatible with split keyboards.
+
+# Use your own debouncing code
+* Set ```DEBOUNCE_TYPE = custom ```.
+* Add ```SRC += debounce.c```
+* Add your own ```debounce.c```. Look at current implementations in ```quantum/debounce``` for examples.
+* Debouncing occurs after every raw matrix scan.
+* Use num_rows rather than MATRIX_ROWS, so that split keyboards are supported correctly.
+
+# Changing between included debouncing methods
+You can either use your own code, by including your own debounce.c, or switch to another included one.
+Included debounce methods are:
+* eager_pr - debouncing per row. On any state change, response is immediate, followed by locking the row ```DEBOUNCE_DELAY``` milliseconds of no further input for that row. 
+For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be
+appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use.
+* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` milliseconds of no further input for that key
+* sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed.
+
+

docs/feature_encoders.md

@@ -13,7 +13,7 @@ and this to your `config.h`:
 Each PAD_A/B variable defines an array so multiple encoders can be defined, e.g.:
 
     #define ENCODERS_PAD_A { encoder1a, encoder2a }
-    #define ENCODERS_PAD_B { encoder1a, encoder2b }
+    #define ENCODERS_PAD_B { encoder1b, encoder2b }
 
 If your encoder's clockwise directions are incorrect, you can swap the A & B pad definitions.
 
@@ -32,15 +32,19 @@ The callback functions can be inserted into your `<keyboard>.c`:
 or `keymap.c`:
 
     void encoder_update_user(uint8_t index, bool clockwise) {
-        if (index == 0) {
-            if (clockwise) {
-                register_code(KC_PGDN);
-                unregister_code(KC_PGDN);
-            } else {
-                register_code(KC_PGUP);
-                unregister_code(KC_PGUP);
-            }
+      if (index == 0) { /* First encoder */
+        if (clockwise) {
+          tap_code(KC_PGDN);
+        } else {
+          tap_code(KC_PGUP);
         }
+      } else if (index == 1) { /* Second encoder
+        if (clockwise) {
+          tap_code(KC_UP);
+        } else {
+          tap_code(KC_DOWN);
+        }
+      }
     }
 
 ## Hardware

docs/feature_grave_esc.md

@@ -4,7 +4,11 @@ If you're using a 60% keyboard, or any other layout with no F-row, you will have
 
 ## Usage
 
-Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. When pressed it will behave like `KC_ESC`, but with Shift or GUI held it will send `KC_GRAVE`.
+Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. Most of the time this key will output `KC_ESC` when pressed. However, when Shift or GUI are held down it will output `KC_GRV` instead.
+
+## What Your OS Sees
+
+If Mary presses GESC on her keyboard, the OS will see an KC_ESC character. Now if Mary holds Shift down and presses GESC it will output `~`, or a shifted backtick. Now if she holds GUI/CMD/WIN, it will output a simple <code>&#96;</code> character.
 
 ## Keycodes
 
@@ -12,6 +16,10 @@ Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) w
 |---------|-----------|------------------------------------------------------------------|
 |`KC_GESC`|`GRAVE_ESC`|Escape when pressed, <code>&#96;</code> when Shift or GUI are held|
 
+### Caveats
+
+On macOS, Command+<code>&#96;</code> is by default mapped to "Move focus to next window" so it will not output a backtick. Additionally, Terminal always recognises this shortcut to cycle between windows, even if the shortcut is changed in the Keyboard preferences.
+
 ## Configuration
 
 There are several possible key combinations this will break, among them Control+Shift+Escape on Windows and Command+Option+Escape on macOS. To work around this, you can `#define` these options in your `config.h`:

docs/feature_haptic_feedback.md

@@ -0,0 +1,147 @@
+# Haptic Feedback
+
+## Haptic feedback rules.mk options
+
+The following options are currently available for haptic feedback in `rule.mk`:
+
+`HAPTIC_ENABLE += DRV2605L`
+
+`HAPTIC_ENABLE += SOLENOID`
+
+## Known Supported Hardware
+
+| Name               | Description                                     |
+|--------------------|-------------------------------------------------|
+| [LV061228B-L65-A](https://www.digikey.com/product-detail/en/jinlong-machinery-electronics-inc/LV061228B-L65-A/1670-1050-ND/7732325) | z-axis 2v LRA |
+| [Mini Motor Disc](https://www.adafruit.com/product/1201)  | small 2-5v ERM |
+
+## Haptic Keycodes
+
+Not all keycodes below will work depending on which haptic mechanism you have chosen.
+
+| Name      | Description                                           |
+|-----------|-------------------------------------------------------|
+|`HPT_ON`   | Turn haptic feedback on                               |
+|`HPT_OFF`  | Turn haptic feedback on                               |
+|`HPT_TOG`  | Toggle haptic feedback on/off                         |
+|`HPT_RST`  | Reset haptic feedback config to default               |
+|`HPT_FBK`  | Toggle feedback to occur on keypress, release or both |
+|`HPT_BUZ`  | Toggle solenoid buzz on/off                           |
+|`HPT_MODI` | Go to next DRV2605L waveform                          |
+|`HPT_MODD` | Go to previous DRV2605L waveform                      |
+|`HPT_DWLI` | Increase Solenoid dwell time                          |
+|`HPT_DWLD` | Decrease Solenoid dwell time                          |
+
+### Solenoids
+
+First you will need a build a circuit to drive the solenoid through a mosfet as most MCU will not be able to provide the current needed to drive the coil in the solenoid.
+
+[Wiring diagram provided by Adafruit](https://playground.arduino.cc/uploads/Learning/solenoid_driver.pdf)
+
+Select a pin that has PWM for the signal pin
+
+```
+#define SOLENOID_PIN *pin*
+```
+
+Beware that some pins may be powered during bootloader (ie. A13 on the STM32F303 chip) and will result in the solenoid kept in the on state through the whole flashing process. This may overheat and damage the solenoid. If you find that the pin the solenoid is connected to is triggering the solenoid during bootloader/DFU, select another pin.
+
+### DRV2605L
+
+DRV2605L is controlled over i2c protocol, and has to be connected to the SDA and SCL pins, these varies depending on the MCU in use.
+
+#### Feedback motor setup
+
+This driver supports 2 different feedback motors. Set the following in your `config.h` based on which motor you have selected.
+
+##### ERM
+
+Eccentric Rotating Mass vibration motors (ERM) is motor with a off-set weight attached so when drive signal is attached, the off-set weight spins and causes a sinusoidal wave that translate into vibrations.
+
+```
+#define FB_ERM_LRA 0
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* Please refer to your datasheet for the optimal setting for your specific motor. */
+#define RATED_VOLTAGE 3
+#define V_PEAK 5
+```
+##### LRA
+
+Linear resonant actuators (LRA, also know as a linear vibrator) works different from a ERM. A LRA has a weight and magnet suspended by springs and a voice coil. When the drive signal is applied, the weight would be vibrate on a single axis (side to side or up and down). Since the weight is attached to a spring, there is a resonance effect at a specific frequency. This frequency is where the LRA will operate the most efficiently. Refer to the motor's datasheet for the recommanded range for this frequency.
+
+``` 
+#define FB_ERM_LRA 1
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* Please refer to your datasheet for the optimal setting for your specific motor. */
+#define RATED_VOLTAGE 2
+#define V_PEAK 2.8
+#define V_RMS 2.0 
+#define V_PEAK 2.1
+#define F_LRA 205 /* resonance freq */
+```
+
+#### DRV2605L waveform library
+
+DRV2605L comes with preloaded library of various waveform sequences that can be called and played. If writing a macro, these waveforms can be played using `DRV_pulse(*sequence name or number*)`
+
+List of waveform sequences from the datasheet:
+
+|seq# | Sequence name          |seq# | Sequence name                  |seq# |Sequence name                           |
+|-----|---------------------|-----|-----------------------------------|-----|--------------------------------------|
+| 1   | strong_click 		| 43  | lg_dblclick_med_60                | 85  | transition_rampup_med_smooth2        |
+| 2   | strong_click_60 	| 44  | lg_dblsharp_tick                  | 86  | transition_rampup_short_smooth1      |
+| 3   | strong_click_30 	| 45  | lg_dblsharp_tick_80               | 87  | transition_rampup_short_smooth2      |
+| 4   | sharp_click 		| 46  | lg_dblsharp_tick_60               | 88  | transition_rampup_long_sharp1        |
+| 5   | sharp_click_60      | 47  | buzz                              | 89  | transition_rampup_long_sharp2        |
+| 6   | sharp_click_30      | 48  | buzz_80				              | 90  | transition_rampup_med_sharp1         |
+| 7   | soft_bump           | 49  | buzz_60		                      | 91  | transition_rampup_med_sharp2         |
+| 8   | soft_bump_60        | 50  | buzz_40				              | 92  | transition_rampup_short_sharp1       |
+| 9   | soft_bump_30        | 51  | buzz_20				              | 93  | transition_rampup_short_sharp2       |
+| 10  | dbl_click           | 52  | pulsing_strong                    | 94  | transition_rampdown_long_smooth1_50  |
+| 11  | dbl_click_60        | 53  | pulsing_strong_80                 | 95  | transition_rampdown_long_smooth2_50  |
+| 12  | trp_click           | 54  | pulsing_medium                    | 96  | transition_rampdown_med_smooth1_50   |
+| 13  | soft_fuzz           | 55  | pulsing_medium_80                 | 97  | transition_rampdown_med_smooth2_50   |
+| 14  | strong_buzz         | 56  | pulsing_sharp                     | 98  | transition_rampdown_short_smooth1_50 |
+| 15  | alert_750ms         | 57  | pulsing_sharp_80                  | 99  | transition_rampdown_short_smooth2_50 |
+| 16  | alert_1000ms        | 58  | transition_click	              | 100 | transition_rampdown_long_sharp1_50   |
+| 17  | strong_click1       | 59  | transition_click_80               | 101 | transition_rampdown_long_sharp2_50   |
+| 18  | strong_click2_80    | 60  | transition_click_60	              | 102 | transition_rampdown_med_sharp1_50    |
+| 19  | strong_click3_60    | 61  | transition_click_40	              | 103 | transition_rampdown_med_sharp2_50    |
+| 20  | strong_click4_30    | 62  | transition_click_20	              | 104 | transition_rampdown_short_sharp1_50  |
+| 21  | medium_click1       | 63  | transition_click_10	              | 105 | transition_rampdown_short_sharp2_50  |
+| 22  | medium_click2_80    | 64  | transition_hum                    | 106 | transition_rampup_long_smooth1_50    |
+| 23  | medium_click3_60    | 65  | transition_hum_80                 | 107 | transition_rampup_long_smooth2_50    |
+| 24  | sharp_tick1         | 66  | transition_hum_60                 | 108 | transition_rampup_med_smooth1_50     |
+| 25  | sharp_tick2_80      | 67  | transition_hum_40                 | 109 | transition_rampup_med_smooth2_50     |
+| 26  | sharp_tick3_60      | 68  | transition_hum_20                 | 110 | transition_rampup_short_smooth1_50   |
+| 27  | sh_dblclick_str     | 69  | transition_hum_10                 | 111 | transition_rampup_short_smooth2_50   |
+| 28  | sh_dblclick_str_80  | 70  | transition_rampdown_long_smooth1  | 112 | transition_rampup_long_sharp1_50     |
+| 29  | sh_dblclick_str_60  | 71  | transition_rampdown_long_smooth2  | 113 | transition_rampup_long_sharp2_50     |
+| 30  | sh_dblclick_str_30  | 72  | transition_rampdown_med_smooth1   | 114 | transition_rampup_med_sharp1_50      |
+| 31  | sh_dblclick_med     | 73  | transition_rampdown_med_smooth2   | 115 | transition_rampup_med_sharp2_50      |
+| 32  | sh_dblclick_med_80  | 74  | transition_rampdown_short_smooth1 | 116 | transition_rampup_short_sharp1_50    |
+| 33  | sh_dblclick_med_60  | 75  | transition_rampdown_short_smooth2 | 117 | transition_rampup_short_sharp2_50    |
+| 34  | sh_dblsharp_tick    | 76  | transition_rampdown_long_sharp1   | 118 | long_buzz_for_programmatic_stopping  |
+| 35  | sh_dblsharp_tick_80 | 77  | transition_rampdown_long_sharp2   | 119 | smooth_hum1_50                       |
+| 36  | sh_dblsharp_tick_60 | 78  | transition_rampdown_med_sharp1    | 120 | smooth_hum2_40                       |
+| 37  | lg_dblclick_str     | 79  | transition_rampdown_med_sharp2    | 121 | smooth_hum3_30                       |
+| 38  | lg_dblclick_str_80  | 80  | transition_rampdown_short_sharp1  | 122 | smooth_hum4_20                       |
+| 39  | lg_dblclick_str_60  | 81  | transition_rampdown_short_sharp2  | 123 | smooth_hum5_10                       |
+| 40  | lg_dblclick_str_30  | 82  | transition_rampup_long_smooth1    |     |                                      |
+| 41  | lg_dblclick_med     | 83  | transition_rampup_long_smooth2    |     |                                      |
+| 42  | lg_dblclick_med_80  | 84  | transition_rampup_med_smooth1     |     |                                      |
+### Optional DRV2605L defines
+
+```
+#define DRV_GREETING *sequence name or number*
+```
+If haptic feedback is enabled, the keyboard will vibrate to a specific sqeuence during startup. That can be selected using the following define:
+
+```
+#define DRV_MODE_DEFAULT *sequence name or number*
+```
+This will set what sequence HPT_RST will set as the active mode. If not defined, mode will be set to 1 when HPT_RST is pressed.

docs/feature_layouts.md

@@ -51,6 +51,35 @@ The folder name must be added to the keyboard's `rules.mk`:
 
 but the `LAYOUT_<layout>` variable must be defined in `<folder>.h` as well.
 
+## Building a Keymap
+
+You should be able to build the keyboard keymap with a command in this format:
+
+    make <keyboard>:<layout>
+
+### Conflicting layouts
+When a keyboard supports multiple layout options,
+
+    LAYOUTS = ortho_4x4 ortho_4x12
+
+And a layout exists for both options,
+```
+layouts/
++ community/
+| + ortho_4x4/
+| | + <layout>/
+| | | + ...
+| + ortho_4x12/
+| | + <layout>/
+| | | + ...
+| + ...
+```
+
+The FORCE_LAYOUT argument can be used to specify which layout to build
+
+    make <keyboard>:<layout> FORCE_LAYOUT=ortho_4x4
+    make <keyboard>:<layout> FORCE_LAYOUT=ortho_4x12
+
 ## Tips for Making Layouts Keyboard-Agnostic
 
 ### Includes

docs/feature_leader_key.md

@@ -5,10 +5,11 @@ If you've ever used Vim, you know what a Leader key is. If not, you're about to
 That's what `KC_LEAD` does. Here's an example:
 
 1. Pick a key on your keyboard you want to use as the Leader key. Assign it the keycode `KC_LEAD`. This key would be dedicated just for this -- it's a single action key, can't be used for anything else.
-2. Include the line `#define LEADER_TIMEOUT 300` in your config.h. The 300 there is 300ms -- that's how long you have for the sequence of keys following the leader. You can tweak this value for comfort, of course.
-3. Within your `matrix_scan_user` function, do something like this:
+2. Include the line `#define LEADER_TIMEOUT 300` in your `config.h`. This sets the timeout for the `KC_LEAD` key.  Specifically, when you press the `KC_LEAD` key, you only have a certain amount of time to complete the Leader Key sequence.  The `300` here sets that to 300ms, and you can increase this value to give you more time to hit the sequence. But any keys pressed during this timeout are intercepted and not sent, so you may want to keep this value low. .  
+   * By default, this timeout is how long after pressing `KC_LEAD` to complete your entire sequence. This may be very low for some people. So you may want to increase this timeout.  Optionally, you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.  This allows you to maintain a low value here, but still be able to use the longer sequences.   To enable this option, add `#define LEADER_PER_KEY_TIMING` to your `config.h`.
+3. Within your `matrix_scan_user` function, add something like this:
 
-```
+```c
 LEADER_EXTERNS();
 
 void matrix_scan_user(void) {
@@ -44,6 +45,102 @@ Each of these accepts one or more keycodes as arguments. This is an important po
 
 To add support for Leader Key you simply need to add a single line to your keymap's `rules.mk`:
 
-```
+```make
 LEADER_ENABLE = yes
 ```
+
+## Per Key Timing on Leader keys
+
+Rather than relying on an incredibly high timeout for long leader key strings or those of us without 200wpm typing skills, we can enable per key timing to ensure that each key pressed provides us with more time to finish our stroke. This is incredibly helpful with leader key emulation of tap dance (read: multiple taps of the same key like C, C, C).
+
+In order to enable this, place this in your `config.h`:
+```c
+#define LEADER_PER_KEY_TIMING
+```
+
+After this, it's recommended that you lower your `LEADER_TIMEOUT` to something less that 300ms.
+
+```c
+#define LEADER_TIMEOUT 250
+```
+
+Now, something like this won't seem impossible to do without a 1000MS leader key timeout:
+
+```c
+SEQ_THREE_KEYS(KC_C, KC_C, KC_C) {
+  SEND_STRING("Per key timing is great!!!");
+}
+```
+
+## Strict Key Processing
+
+By default, the Leader Key feature will filter the keycode out of [`Mod-Tap`](feature_advanced_keycodes.md#mod-tap) and [`Layer Tap`](feature_advanced_keycodes.md#switching-and-toggling-layers) functions when checking for the Leader sequences. That means if you're using `LT(3, KC_A)`, it will pick this up as `KC_A` for the sequence, rather than `LT(3, KC_A)`, giving a more expected behavior for newer users.
+
+While, this may be fine for most, if you want to specify the whole keycode (eg, `LT(3, KC_A)` from the example above) in the sequence, you can enable this by added `#define LEADER_KEY_STRICT_KEY_PROCESSING` to your `config.h` file.  This well then disable the filtering, and you'll need to specify the whole keycode.
+
+## Customization 
+
+The Leader Key feature has some additional customization to how the Leader Key feature works.  It has two functions that can be called at certain parts of the process.  Namely `leader_start()` and `leader_end()`.
+
+The `leader_start()` function is called when you tap the `KC_LEAD` key, and the `leader_end()` function is called when either the leader sequence is completed, or the leader timeout is hit. 
+
+You can add these functions to your code (`keymap.c` usually) to add feedback to the Leader sequences (such as beeping or playing music).
+
+```c
+void leader_start(void) {
+  // sequence started
+}
+
+void leader_end(void) {
+  // sequence ended (no success/failuer detection)
+}
+```
+
+### Example
+
+This example will play the Mario "One Up" sound when you hit `KC_LEAD` to start the Leader Sequence, and will play "All Star" if it completes successfully or "Rick Roll" you if it fails. 
+
+```c
+bool did_leader_succeed;
+#ifdef AUDIO_ENABLE
+float leader_start[][2] = SONG(ONE_UP_SOUND );
+float leader_succeed[][2] = SONG(ALL_STAR);
+float leader_fail[][2] = SONG(RICK_ROLL);
+#endif
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+  LEADER_DICTIONARY() {
+    did_leader_succeed = leading = false;
+
+    SEQ_ONE_KEY(KC_E) {
+      // Anything you can do in a macro.
+      SEND_STRING(SS_LCTRL(SS_LSFT("t")));
+      did_leader_succeed = true;
+    } else 
+    SEQ_TWO_KEYS(KC_E, KC_D) {
+      SEND_STRING(SS_LGUI("r")"cmd"SS_TAP(KC_ENTER)SS_LCTRL("c"));
+      did_leader_succeed = true;
+    }
+    leader_end();
+  }
+}
+
+void leader_start(void) {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_start);
+#endif
+}
+
+void leader_end(void) {
+  if (did_leader_succeed) {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_succeed);
+#endif
+  } else {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_fail);
+#endif
+  }
+}
+```

docs/feature_led_matrix.md

@@ -0,0 +1,90 @@
+# LED Matrix Lighting
+
+This feature allows you to use LED matrices driven by external drivers. It hooks into the backlight system so you can use the same keycodes as backlighting to control it.
+
+If you want to use RGB LED's you should use the [RGB Matrix Subsystem](feature_rgb_matrix.md) instead.
+
+## Driver configuration
+
+### IS31FL3731
+
+There is basic support for addressable LED matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
+
+    LED_MATRIX_ENABLE = IS31FL3731
+    
+You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `LED_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
+| `LED_DRIVER_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
+| `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | |
+| `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | |
+| `LED_DRIVER_ADDR_3` | (Optional) Address for the third LED driver | |
+| `LED_DRIVER_ADDR_4` | (Optional) Address for the fourth LED driver | |
+
+Here is an example using 2 drivers.
+
+	// This is a 7-bit address, that gets left-shifted and bit 0
+	// set to 0 for write, 1 for read (as per I2C protocol)
+	// The address will vary depending on your wiring:
+	// 0b1110100 AD <-> GND
+	// 0b1110111 AD <-> VCC
+	// 0b1110101 AD <-> SCL
+	// 0b1110110 AD <-> SDA
+	#define LED_DRIVER_ADDR_1 0b1110100
+	#define LED_DRIVER_ADDR_2 0b1110110
+
+	#define LED_DRIVER_COUNT 2
+	#define LED_DRIVER_1_LED_COUNT 25
+	#define LED_DRIVER_2_LED_COUNT 24
+	#define LED_DRIVER_LED_COUNT LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL
+
+Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
+
+Define these arrays listing all the LEDs in your `<keyboard>.c`:
+
+	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+	/* Refer to IS31 manual for these locations
+	 *   driver
+	 *   |  LED address
+	 *   |  | */
+	    {0, C3_3},
+	    ....
+	}
+
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731-simple.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` ).
+
+## Keycodes
+
+All LED matrix keycodes are currently shared with the [backlight system](feature_backlight.md).
+
+## LED Matrix Effects
+
+Currently no LED matrix effects have been created.
+
+## Custom layer effects
+
+Custom layer effects can be done by defining this in your `<keyboard>.c`:
+
+    void led_matrix_indicators_kb(void) {
+        led_matrix_set_index_value(index, value);
+    }
+
+A similar function works in the keymap as `led_matrix_indicators_user`.
+
+## Suspended state
+
+To use the suspend feature, add this to your `<keyboard>.c`:
+
+	void suspend_power_down_kb(void)
+	{
+	    led_matrix_set_suspend_state(true);
+	}
+
+	void suspend_wakeup_init_kb(void)
+	{
+	    led_matrix_set_suspend_state(false);
+	}

docs/feature_macros.md

@@ -12,24 +12,28 @@ Here is an example `keymap.c` for a two-key keyboard:
 
 ```c
 enum custom_keycodes {
-	MY_CUSTOM_MACRO = SAFE_RANGE
+  QMKBEST = SAFE_RANGE,
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	if (record->event.pressed) {
-		switch(keycode) {
-			case MY_CUSTOM_MACRO:
-				SEND_STRING("QMK is the best thing ever!"); // this is our macro!
-				return false;
-		}
-	}
-	return true;
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+
+  }
+  return true;
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = {
-	  {MY_CUSTOM_MACRO, KC_ESC}
-	}
+  [0] = {
+    {QMKBEST, KC_ESC}
+  }
 };
 ```
 
@@ -37,7 +41,7 @@ What happens here is this:
 We first define a new custom keycode in the range not occupied by any other keycodes.
 Then we use the `process_record_user` function, which is called whenever a key is pressed or released, to check if our custom keycode has been activated.
 If yes, we send the string `"QMK is the best thing ever!"` to the computer via the `SEND_STRING` macro (this is a C preprocessor macro, not to be confused with QMK macros).
-We return `false` to indicate to the caller that the key press we just processed need not be processed any further.
+We return `true` to indicate to the caller that the key press we just processed should continue to be processed as normal (as we didn't replace or alter the functionality).
 Finally, we define the keymap so that the first button activates our macro and the second button is just an escape button.
 
 You might want to add more than one macro.
@@ -45,28 +49,42 @@ You can do that by adding another keycode and adding another case to the switch
 
 ```c
 enum custom_keycodes {
-	MY_CUSTOM_MACRO = SAFE_RANGE,
-	MY_OTHER_MACRO
+  QMKBEST = SAFE_RANGE,
+  QMKURL,
+  MY_OTHER_MACRO
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	if (record->event.pressed) {
-		switch(keycode) {
-			case MY_CUSTOM_MACRO:
-				SEND_STRING("QMK is the best thing ever!");
-				return false;
-			case MY_OTHER_MACRO:
-				SEND_STRING(SS_LCTRL("ac")); // selects all and copies
-				return false;
-		}
-	}
-	return true;
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+    case MY_OTHER_MACRO:
+      if (record->event.pressed) {
+                SEND_STRING(SS_LCTRL("ac")); // selects all and copies
+      }
+      break;
+  }
+  return true;
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = {
-	  {MY_CUSTOM_MACRO, MY_OTHER_MACRO}
-	}
+  [0] = {
+    {MY_CUSTOM_MACRO, MY_OTHER_MACRO}
+  }
 };
 ```
 
@@ -128,96 +146,21 @@ send_string(my_str);
 SEND_STRING(".."SS_TAP(X_END));
 ```
 
-## The Old Way: `MACRO()` & `action_get_macro`
-
-?> This is inherited from TMK, and hasn't been updated - it's recommend that you use `SEND_STRING` and `process_record_user` instead.
-
-By default QMK assumes you don't have any macros. To define your macros you create an `action_get_macro()` function. For example:
-
-```c
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-	if (record->event.pressed) {
-		switch(id) {
-			case 0:
-				return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
-			case 1:
-				return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
-		}
-	}
-	return MACRO_NONE;
-};
-```
-
-This defines two macros which will be run when the key they are assigned to is pressed. If instead you'd like them to run when the key is released you can change the if statement:
-
-	if (!record->event.pressed) {
-
-### Macro Commands
-
-A macro can include the following commands:
-
-* I() change interval of stroke in milliseconds.
-* D() press key.
-* U() release key.
-* T() type key(press and release).
-* W() wait (milliseconds).
-* END end mark.
-
-### Mapping a Macro to a Key
-
-Use the `M()` function within your `KEYMAP()` to call a macro. For example, here is the keymap for a 2-key keyboard:
-
-```c
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = KEYMAP(
-		M(0), M(1)
-	),
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-	if (record->event.pressed) {
-		switch(id) {
-			case 0:
-				return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
-			case 1:
-				return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
-		}
-	}
-	return MACRO_NONE;
-};
-```
-
-When you press the key on the left it will type "Hi!" and when you press the key on the right it will type "Bye!".
-
-### Naming Your Macros
-
-If you have a bunch of macros you want to refer to from your keymap while keeping the keymap easily readable you can name them using `#define` at the top of your file.
-
-```c
-#define M_HI M(0)
-#define M_BYE M(1)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = KEYMAP(
-		M_HI, M_BYE
-	),
-};
-```
 
 ## Advanced Macro Functions
 
-There are some functions you may find useful in macro-writing. Keep in mind that while you can write some fairly advanced code within a macro if your functionality gets too complex you may want to define a custom keycode instead. Macros are meant to be simple.
+There are some functions you may find useful in macro-writing. Keep in mind that while you can write some fairly advanced code within a macro, if your functionality gets too complex you may want to define a custom keycode instead. Macros are meant to be simple.
 
 ### `record->event.pressed`
 
 This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is
 
 ```c
-	if (record->event.pressed) {
-		// on keydown
-	} else {
-		// on keyup
-	}
+    if (record->event.pressed) {
+        // on keydown
+    } else {
+        // on keyup
+    }
 ```
 
 ### `register_code(<kc>);`
@@ -232,6 +175,14 @@ Parallel to `register_code` function, this sends the `<kc>` keyup event to the c
 
 This will send `register_code(<kc>)` and then `unregister_code(<kc>)`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it).
 
+If you're having issues with taps (un)registering, you can add a delay between the register and unregister events by setting `#define TAP_CODE_DELAY 100` in your `config.h` file. The value is in milliseconds.
+
+### `register_code16(<kc>);`, `unregister_code16(<kc>);` and `tap_code16(<kc>);`
+
+These functions work similar to their regular counterparts, but allow you to use modded keycodes (with Shift, Alt, Control, and/or GUI applied to them).
+
+Eg, you could use `register_code16(S(KC_5));` instead of registering the mod, then registering the keycode.
+
 ### `clear_keyboard();`
 
 This will clear all mods and keys currently pressed.
@@ -244,22 +195,100 @@ This will clear all mods currently pressed.
 
 This will clear all keys besides the mods currently pressed.
 
-## Advanced Example: Single-Key Copy/Paste
+
+##  **(DEPRECATED)** The Old Way: `MACRO()` & `action_get_macro`
+
+!> This is inherited from TMK, and hasn't been updated - it's recommended that you use `SEND_STRING` and `process_record_user` instead.
+
+By default QMK assumes you don't have any macros. To define your macros you create an `action_get_macro()` function. For example:
+
+```c
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+    if (record->event.pressed) {
+        switch(id) {
+            case 0:
+                return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
+            case 1:
+                return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
+        }
+    }
+    return MACRO_NONE;
+};
+```
+
+This defines two macros which will be run when the key they are assigned to is pressed. If instead you'd like them to run when the key is released you can change the if statement:
+
+    if (!record->event.pressed) {
+
+### Macro Commands
+
+A macro can include the following commands:
+
+* I() change interval of stroke in milliseconds.
+* D() press key.
+* U() release key.
+* T() type key(press and release).
+* W() wait (milliseconds).
+* END end mark.
+
+### Mapping a Macro to a Key
+
+Use the `M()` function within your keymap to call a macro. For example, here is the keymap for a 2-key keyboard:
+
+```c
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        M(0), M(1)
+    ),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+    if (record->event.pressed) {
+        switch(id) {
+            case 0:
+                return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
+            case 1:
+                return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
+        }
+    }
+    return MACRO_NONE;
+};
+```
+
+When you press the key on the left it will type "Hi!" and when you press the key on the right it will type "Bye!".
+
+### Naming Your Macros
+
+If you have a bunch of macros you want to refer to from your keymap while keeping the keymap easily readable you can name them using `#define` at the top of your file.
+
+```c
+#define M_HI M(0)
+#define M_BYE M(1)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        M_HI, M_BYE
+    ),
+};
+```
+
+
+### Advanced Example: Single-Key Copy/Paste
 
 This example defines a macro which sends `Ctrl-C` when pressed down, and `Ctrl-V` when released.
 
 ```c
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-	switch(id) {
-		case 0: {
-			if (record->event.pressed) {
-				return MACRO( D(LCTL), T(C), U(LCTL), END  );
-			} else {
-				return MACRO( D(LCTL), T(V), U(LCTL), END  );
-			}
-			break;
-		}
-	}
-	return MACRO_NONE;
+    switch(id) {
+        case 0: {
+            if (record->event.pressed) {
+                return MACRO( D(LCTL), T(C), U(LCTL), END  );
+            } else {
+                return MACRO( D(LCTL), T(V), U(LCTL), END  );
+            }
+            break;
+        }
+    }
+    return MACRO_NONE;
 };
 ```

docs/feature_mouse_keys.md

@@ -1,48 +1,48 @@
 # Mousekeys
 
 
-Mousekeys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer around, click up to 5 buttons, and even scroll in all 4 directions. QMK uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
+Mousekeys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer around, click up to 5 buttons, and even scroll in all 4 directions.
 
-## Adding Mousekeys to a Keymap
+There are 2 ways to define how the mousekeys behave, using "[auto-accelerating](#configuring-the-behavior-of-mousekeys-with-auto-accelerated-movement)" or "[3-speed constant](#configuring-the-behavior-of-mousekeys-with-3-speed-constant-movement)" behavior.
 
-There are two steps to adding Mousekeys support to your keyboard. You must enable support in the `rules.mk` file and you must map mouse actions to keys on your keyboard.
+In either case, you will need to enable mousekeys in your makefile,
+and add the relevant [keycodes](#mapping-mouse-actions-to-keyboard-keys) to your keymap.
 
-### Adding Mousekeys Support in the `rules.mk`
+#### Enable Mousekeys
 
-To add support for Mousekeys you simply need to add a single line to your keymap's `rules.mk`:
+To enable the mousekey functionality, add the following line to your keymap's `rules.mk`:
 
 ```
 MOUSEKEY_ENABLE = yes
 ```
 
-You can see an example here: https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/66/keymaps/mouse_keys/rules.mk
-
-### Mapping Mouse Actions to Keyboard Keys
+#### Mapping Mouse Actions to Keyboard Keys
 
 You can use these keycodes within your keymap to map button presses to mouse actions:
 
-|Key             |Aliases  |Description                |
-|----------------|---------|---------------------------|
-|`KC_MS_UP`      |`KC_MS_U`|Mouse Cursor Up            |
-|`KC_MS_DOWN`    |`KC_MS_D`|Mouse Cursor Down          |
-|`KC_MS_LEFT`    |`KC_MS_L`|Mouse Cursor Left          |
-|`KC_MS_RIGHT`   |`KC_MS_R`|Mouse Cursor Right         |
-|`KC_MS_BTN1`    |`KC_BTN1`|Mouse Button 1             |
-|`KC_MS_BTN2`    |`KC_BTN2`|Mouse Button 2             |
-|`KC_MS_BTN3`    |`KC_BTN3`|Mouse Button 3             |
-|`KC_MS_BTN4`    |`KC_BTN4`|Mouse Button 4             |
-|`KC_MS_BTN5`    |`KC_BTN5`|Mouse Button 5             |
-|`KC_MS_WH_UP`   |`KC_WH_U`|Mouse Wheel Up             |
-|`KC_MS_WH_DOWN` |`KC_WH_D`|Mouse Wheel Down           |
-|`KC_MS_WH_LEFT` |`KC_WH_L`|Mouse Wheel Left           |
-|`KC_MS_WH_RIGHT`|`KC_WH_R`|Mouse Wheel Right          |
-|`KC_MS_ACCEL0`  |`KC_ACL0`|Set mouse acceleration to 0|
-|`KC_MS_ACCEL1`  |`KC_ACL1`|Set mouse acceleration to 1|
-|`KC_MS_ACCEL2`  |`KC_ACL2`|Set mouse acceleration to 2|
+|Key             |Aliases  |Description                        |
+|----------------|---------|-----------------------------------|
+|`KC_MS_UP`      |`KC_MS_U`|Mouse Cursor Up                    |
+|`KC_MS_DOWN`    |`KC_MS_D`|Mouse Cursor Down                  |
+|`KC_MS_LEFT`    |`KC_MS_L`|Mouse Cursor Left                  |
+|`KC_MS_RIGHT`   |`KC_MS_R`|Mouse Cursor Right                 |
+|`KC_MS_BTN1`    |`KC_BTN1`|Mouse Button 1                     |
+|`KC_MS_BTN2`    |`KC_BTN2`|Mouse Button 2                     |
+|`KC_MS_BTN3`    |`KC_BTN3`|Mouse Button 3                     |
+|`KC_MS_BTN4`    |`KC_BTN4`|Mouse Button 4                     |
+|`KC_MS_BTN5`    |`KC_BTN5`|Mouse Button 5                     |
+|`KC_MS_WH_UP`   |`KC_WH_U`|Mouse Wheel Up                     |
+|`KC_MS_WH_DOWN` |`KC_WH_D`|Mouse Wheel Down                   |
+|`KC_MS_WH_LEFT` |`KC_WH_L`|Mouse Wheel Left                   |
+|`KC_MS_WH_RIGHT`|`KC_WH_R`|Mouse Wheel Right                  |
+|`KC_MS_ACCEL0`  |`KC_ACL0`|Set mouse acceleration to 0(slow)  |
+|`KC_MS_ACCEL1`  |`KC_ACL1`|Set mouse acceleration to 1(medium)|
+|`KC_MS_ACCEL2`  |`KC_ACL2`|Set mouse acceleration to 2(fast)  |
 
-You can see an example in the `_ML` here: https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/66/keymaps/mouse_keys/keymap.c#L46
 
-## Configuring the Behavior of Mousekeys
+## Configuring the Behavior of Mousekeys with auto-accelerated movement
+
+This behavior is intended to emulate the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
 
 The default speed for controlling the mouse with the keyboard is intentionally slow. You can adjust these parameters by adding these settings to your keymap's `config.h` file. All times are specified in milliseconds (ms).
 
@@ -55,27 +55,60 @@ The default speed for controlling the mouse with the keyboard is intentionally s
 #define MOUSEKEY_WHEEL_TIME_TO_MAX 40
 ```
 
-
-### `MOUSEKEY_DELAY`
+#### `MOUSEKEY_DELAY`
 
 When one of the mouse movement buttons is pressed this setting is used to define the delay between that button press and the mouse cursor moving. Some people find that small movements are impossible if this setting is too low, while settings that are too high feel sluggish.
 
-### `MOUSEKEY_INTERVAL`
+#### `MOUSEKEY_INTERVAL`
 
 When a movement key is held down this specifies how long to wait between each movement report. Lower settings will translate into an effectively higher mouse speed.
 
-### `MOUSEKEY_MAX_SPEED`
+#### `MOUSEKEY_MAX_SPEED`
 
 As a movement key is held down the speed of the mouse cursor will increase until it reaches `MOUSEKEY_MAX_SPEED`.
 
-### `MOUSEKEY_TIME_TO_MAX`
+#### `MOUSEKEY_TIME_TO_MAX`
 
 How long you want to hold down a movement key for until `MOUSEKEY_MAX_SPEED` is reached. This controls how quickly your cursor will accelerate.
 
-### `MOUSEKEY_WHEEL_MAX_SPEED`
+#### `MOUSEKEY_WHEEL_MAX_SPEED`
 
 The top speed for scrolling movements.
 
-### `MOUSEKEY_WHEEL_TIME_TO_MAX`
+#### `MOUSEKEY_WHEEL_TIME_TO_MAX`
 
 How long you want to hold down a scroll key for until `MOUSEKEY_WHEEL_MAX_SPEED` is reached. This controls how quickly your scrolling will accelerate.
+
+
+## Configuring the Behavior of Mousekeys with 3-speed constant movement
+
+In your keymap's `config.h`, you must add the line:
+```
+#define MK_3_SPEED
+```
+Then you can precisely define 3 different speeds for both the cursor and the mouse wheel, and also whether speed selection is momentary or tap-to-select.
+For each speed, you can specify how many milliseconds you want between reports(interval), and how far you want to it to move per report(offset).
+
+For example:
+
+```
+#define MK_3_SPEED
+#define MK_MOMENTARY_ACCEL // comment this out for tap-to-select acceleration
+// cursor speeds:
+#define MK_C_OFFSET_SLOW     1 // pixels
+#define MK_C_INTERVAL_SLOW 100 // milliseconds
+#define MK_C_OFFSET_MED      4
+#define MK_C_INTERVAL_MED   16
+#define MK_C_OFFSET_FAST    12
+#define MK_C_INTERVAL_FAST  16
+// scroll wheel speeds:
+#define MK_W_OFFSET_SLOW     1 // wheel clicks
+#define MK_W_INTERVAL_SLOW 400 // milliseconds
+#define MK_W_OFFSET_MED      1
+#define MK_W_INTERVAL_MED  200
+#define MK_W_OFFSET_FAST     1
+#define MK_W_INTERVAL_FAST 100
+```
+
+Medium values will be used as the default or unmodified speed.
+The speed at which both the cursor and scrolling move can be selected with KC_ACL0, KC_ACL1, KC_ACL2 for slow, medium, and fast. However, if you leave MK_MOMENTARY_ACCEL defined then there is no need to ever send KC_ACL1, since that will be the unmodified speed.

docs/feature_rgb_matrix.md

@@ -1,105 +1,127 @@
 # RGB Matrix Lighting
 
+This feature allows you to use RGB LED matrices driven by external drivers. It hooks into the RGBLIGHT system so you can use the same keycodes as RGBLIGHT to control it.
+
+If you want to use single color LED's you should use the [LED Matrix Subsystem](feature_led_matrix.md) instead.
+
 ## Driver configuration
 
 ### IS31FL3731
 
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
 
-    RGB_MATRIX_ENABLE = IS31FL3731
+```C
+RGB_MATRIX_ENABLE = IS31FL3731
+```
 
 Configure the hardware via your `config.h`:
 
-	// This is a 7-bit address, that gets left-shifted and bit 0
-	// set to 0 for write, 1 for read (as per I2C protocol)
-	// The address will vary depending on your wiring:
-	// 0b1110100 AD <-> GND
-	// 0b1110111 AD <-> VCC
-	// 0b1110101 AD <-> SCL
-	// 0b1110110 AD <-> SDA
-	#define DRIVER_ADDR_1 0b1110100
-	#define DRIVER_ADDR_2 0b1110110
+```C
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define DRIVER_ADDR_1 0b1110100
+#define DRIVER_ADDR_2 0b1110110
 
-	#define DRIVER_COUNT 2
-	#define DRIVER_1_LED_TOTAL 25
-	#define DRIVER_2_LED_TOTAL 24
-	#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 25
+#define DRIVER_2_LED_TOTAL 24
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
+```
 
 Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
-	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-	/* Refer to IS31 manual for these locations
-	 *   driver
-	 *   |  R location
-	 *   |  |      G location
-	 *   |  |      |      B location
-	 *   |  |      |      | */
-	    {0, C1_3,  C2_3,  C3_3},
-	    ....
-	}
+```C
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+    *   driver
+    *   |  R location
+    *   |  |      G location
+    *   |  |      |      B location
+    *   |  |      |      | */
+    {0, C1_3,  C2_3,  C3_3},
+    ....
+}
+```
 
 Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
 
-###  IS31FL3733
+###  IS31FL3733/IS31FL3737
+
+!> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`.
 
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
 
-    RGB_MATRIX_ENABLE = IS31FL3733
+```C
+RGB_MATRIX_ENABLE = IS31FL3733
+```
 
 Configure the hardware via your `config.h`:
 
-	// This is a 7-bit address, that gets left-shifted and bit 0
-	// set to 0 for write, 1 for read (as per I2C protocol)
-	// The address will vary depending on your wiring:
-	// 00 <-> GND
-	// 01 <-> SCL
-	// 10 <-> SDA
-	// 11 <-> VCC
-	// ADDR1 represents A1:A0 of the 7-bit address.
-	// ADDR2 represents A3:A2 of the 7-bit address.
-	// The result is: 0b101(ADDR2)(ADDR1)
-	#define DRIVER_ADDR_1 0b1010000
-	#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+```C
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define DRIVER_ADDR_1 0b1010000
+#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
 
-	#define DRIVER_COUNT 1
-	#define DRIVER_1_LED_TOTAL 64
-	#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 64
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+```
 
 Currently only a single drivers is supported, but it would be trivial to support all 4 combinations. For now define `DRIVER_ADDR_2` as `DRIVER_ADDR_1`
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
-	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-	/* Refer to IS31 manual for these locations
-	 *   driver
-	 *   |  R location
-	 *   |  |       G location
-	 *   |  |       |       B location
-	 *   |  |       |       | */
-	    {0, B_1,    A_1,    C_1},
-	    ....
-	}
+```C
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+    *   driver
+    *   |  R location
+    *   |  |       G location
+    *   |  |       |       B location
+    *   |  |       |       | */
+    {0, B_1,    A_1,    C_1},
+    ....
+}
+```
 
 Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
 
 From this point forward the configuration is the same for all the drivers. 
 
-	const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-	/* {row | col << 4}
-	 *    |           {x=0..224, y=0..64}
-	 *    |              |               modifier
-	 *    |              |                 | */
-	    {{0|(0<<4)},   {20.36*0, 21.33*0}, 1},
-	    {{0|(1<<4)},   {20.36*1, 21.33*0}, 1},
-	    ....
-	}
+```C
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+/*  {row | col << 4}
+    *    |         {x=0..224, y=0..64}
+    *    |            |              modifier
+    *    |            |                | */
+    {{0|(0<<4)},   {20.36*0, 21.33*0}, 1},
+    {{0|(1<<4)},   {20.36*1, 21.33*0}, 1},
+    ....
+}
+```
 
 The format for the matrix position used in this array is `{row | (col << 4)}`. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64. The easiest way to calculate these positions is:
 
-    x = 224 / ( NUMBER_OF_ROWS - 1 ) * ROW_POSITION
-    y = 64 / (NUMBER_OF_COLS - 1 ) * COL_POSITION
+```C
+x = 224 / ( NUMBER_OF_COLS - 1 ) * ROW_POSITION
+y = 64 / (NUMBER_OF_ROWS - 1 ) * COL_POSITION
+```
 
 Where all variables are decimels/floats.
 
@@ -109,47 +131,50 @@ Where all variables are decimels/floats.
 
 All RGB keycodes are currently shared with the RGBLIGHT system:
 
-	* `RGB_TOG` - toggle
-	* `RGB_MOD` - cycle through modes
-	* `RGB_HUI` - increase hue
-	* `RGB_HUD` - decrease hue
-	* `RGB_SAI` - increase saturation
-	* `RGB_SAD` - decrease saturation
-	* `RGB_VAI` - increase value
-	* `RGB_VAD` - decrease value
-	* `RGB_SPI` - increase speed effect (no EEPROM support)
-	* `RGB_SPD` - decrease speed effect (no EEPROM support)
-
-
-	* `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system
+* `RGB_TOG` - toggle
+* `RGB_MOD` - cycle through modes
+* `RGB_HUI` - increase hue
+* `RGB_HUD` - decrease hue
+* `RGB_SAI` - increase saturation
+* `RGB_SAD` - decrease saturation
+* `RGB_VAI` - increase value
+* `RGB_VAD` - decrease value
+* `RGB_SPI` - increase speed effect (no EEPROM support)
+* `RGB_SPD` - decrease speed effect (no EEPROM support)
+* `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system
 
 ## RGB Matrix Effects
 
-These are the effects that are currently available:
+All effects have been configured to support current configuration values (Hue, Saturation, Value, & Speed) unless otherwise noted below. These are the effects that are currently available:
 
-	enum rgb_matrix_effects {
-	    RGB_MATRIX_SOLID_COLOR = 1,
-	    RGB_MATRIX_ALPHAS_MODS,
-	    RGB_MATRIX_DUAL_BEACON,
-	    RGB_MATRIX_GRADIENT_UP_DOWN,
-	    RGB_MATRIX_RAINDROPS,
-	    RGB_MATRIX_CYCLE_ALL,
-	    RGB_MATRIX_CYCLE_LEFT_RIGHT,
-	    RGB_MATRIX_CYCLE_UP_DOWN,
-	    RGB_MATRIX_RAINBOW_BEACON,
-	    RGB_MATRIX_RAINBOW_PINWHEELS,
-	    RGB_MATRIX_RAINBOW_MOVING_CHEVRON,
-	    RGB_MATRIX_JELLYBEAN_RAINDROPS,
-	    RGB_MATRIX_DIGITAL_RAIN,
-	#ifdef RGB_MATRIX_KEYPRESSES
-	    RGB_MATRIX_SOLID_REACTIVE,
-	    RGB_MATRIX_SPLASH,
-	    RGB_MATRIX_MULTISPLASH,
-	    RGB_MATRIX_SOLID_SPLASH,
-	    RGB_MATRIX_SOLID_MULTISPLASH,
-	#endif
-	    RGB_MATRIX_EFFECT_MAX
-	};
+```C
+enum rgb_matrix_effects {
+    RGB_MATRIX_NONE = 0,
+    RGB_MATRIX_SOLID_COLOR = 1,     // Static single hue, no speed support
+    RGB_MATRIX_ALPHAS_MODS,         // Static dual hue, speed is hue for secondary hue
+    RGB_MATRIX_GRADIENT_UP_DOWN,    // Static gradient top to bottom, speed controls how much gradient changes
+    RGB_MATRIX_BREATHING,           // Single hue brightness cycling animation
+    RGB_MATRIX_CYCLE_ALL,           // Full keyboard solid hue cycling through full gradient
+    RGB_MATRIX_CYCLE_LEFT_RIGHT,    // Full gradient scrolling left to right 
+    RGB_MATRIX_CYCLE_UP_DOWN,       // Full gradient scrolling top to bottom
+    RGB_MATRIX_RAINBOW_MOVING_CHEVRON,  // Full gradent Chevron shapped scrolling left to right
+    RGB_MATRIX_DUAL_BEACON,         // Full gradient spinning around center of keyboard
+    RGB_MATRIX_RAINBOW_BEACON,      // Full tighter gradient spinning around center of keyboard
+    RGB_MATRIX_RAINBOW_PINWHEELS,   // Full dual gradients spinning two halfs of keyboard
+    RGB_MATRIX_RAINDROPS,           // Randomly changes a single key's hue
+    RGB_MATRIX_JELLYBEAN_RAINDROPS, // Randomly changes a single key's hue and saturation
+    RGB_MATRIX_DIGITAL_RAIN,        // That famous computer simulation
+#if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES)
+    RGB_MATRIX_SOLID_REACTIVE_SIMPLE,   // Pulses keys hit to hue & value then fades value out
+    RGB_MATRIX_SOLID_REACTIVE,      // Static single hue, pulses keys hit to shifted hue then fades to current hue
+    RGB_MATRIX_SPLASH,              // Full gradient & value pulse away from a single key hit then fades value out
+    RGB_MATRIX_MULTISPLASH,         // Full gradient & value pulse away from multiple key hits then fades value out
+    RGB_MATRIX_SOLID_SPLASH,        // Hue & value pulse away from a single key hit then fades value out
+    RGB_MATRIX_SOLID_MULTISPLASH,   // Hue & value pulse away from multiple key hits then fades value out
+#endif
+    RGB_MATRIX_EFFECT_MAX
+};
+```
     
 You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`:
 
@@ -157,18 +182,20 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 |Define                                             |Description                                 |
 |---------------------------------------------------|--------------------------------------------|
 |`#define DISABLE_RGB_MATRIX_ALPHAS_MODS`           |Disables `RGB_MATRIX_ALPHAS_MODS`           |
-|`#define DISABLE_RGB_MATRIX_DUAL_BEACON`           |Disables `RGB_MATRIX_DUAL_BEACON`           |
 |`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN`      |Disables `RGB_MATRIX_GRADIENT_UP_DOWN`      |
-|`#define DISABLE_RGB_MATRIX_RAINDROPS`             |Disables `RGB_MATRIX_RAINDROPS`             |
+|`#define DISABLE_RGB_MATRIX_BREATHING`             |Disables `RGB_MATRIX_BREATHING`             |
 |`#define DISABLE_RGB_MATRIX_CYCLE_ALL`             |Disables `RGB_MATRIX_CYCLE_ALL`             |
 |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`      |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`      |
 |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`         |Disables `RGB_MATRIX_CYCLE_UP_DOWN`         |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|
+|`#define DISABLE_RGB_MATRIX_DUAL_BEACON`           |Disables `RGB_MATRIX_DUAL_BEACON`           |
 |`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`        |Disables `RGB_MATRIX_RAINBOW_BEACON`        |
 |`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`     |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`     |
-|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|
+|`#define DISABLE_RGB_MATRIX_RAINDROPS`             |Disables `RGB_MATRIX_RAINDROPS`             |
 |`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`   |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`   |
 |`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`          |Disables `RGB_MATRIX_DIGITAL_RAIN`          |
 |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`        |Disables `RGB_MATRIX_SOLID_REACTIVE`        |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLEE`|
 |`#define DISABLE_RGB_MATRIX_SPLASH`                |Disables `RGB_MATRIX_SPLASH`                |
 |`#define DISABLE_RGB_MATRIX_MULTISPLASH`           |Disables `RGB_MATRIX_MULTISPLASH`           |
 |`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`          |Disables `RGB_MATRIX_SOLID_SPLASH`          |
@@ -179,26 +206,33 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 
 Custom layer effects can be done by defining this in your `<keyboard>.c`:
 
-    void rgb_matrix_indicators_kb(void) {
-        rgb_matrix_set_color(index, red, green, blue);
-    }
+```C
+void rgb_matrix_indicators_kb(void) {
+    rgb_matrix_set_color(index, red, green, blue);
+}
+```
 
 A similar function works in the keymap as `rgb_matrix_indicators_user`.
 
 ## Additional `config.h` Options
 
-	#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
-	#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
-	#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-	#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
-    #define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1
-    #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+```C
+#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+#define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+```
 
 ## EEPROM storage
 
 The EEPROM for it is currently shared with the RGBLIGHT system (it's generally assumed only one RGB would be used at a time), but could be configured to use its own 32bit address with:
 
-    #define EECONFIG_RGB_MATRIX (uint32_t *)16
+```C
+#define EECONFIG_RGB_MATRIX (uint32_t *)16
+```
 
 Where `16` is an unused index from `eeconfig.h`.
 
@@ -206,12 +240,14 @@ Where `16` is an unused index from `eeconfig.h`.
 
 To use the suspend feature, add this to your `<keyboard>.c`:
 
-	void suspend_power_down_kb(void)
-	{
-	    rgb_matrix_set_suspend_state(true);
-	}
+```C
+void suspend_power_down_kb(void)
+{
+    rgb_matrix_set_suspend_state(true);
+}
 
-	void suspend_wakeup_init_kb(void)
-	{
-	    rgb_matrix_set_suspend_state(false);
-	}
+void suspend_wakeup_init_kb(void)
+{
+    rgb_matrix_set_suspend_state(false);
+}
+```

docs/feature_rgblight.md

@@ -23,10 +23,11 @@ RGBLIGHT_ENABLE = yes
 
 At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these.
 
-|Define      |Description                                  |
-|------------|---------------------------------------------|
-|`RGB_DI_PIN`|The pin connected to the data pin of the LEDs|
-|`RGBLED_NUM`|The number of LEDs connected                 |
+|Define         |Description                                                                                              |
+|---------------|---------------------------------------------------------------------------------------------------------|
+|`RGB_DI_PIN`   |The pin connected to the data pin of the LEDs                                                            |
+|`RGBLED_NUM`   |The number of LEDs connected                                                                             |
+|`RGBLED_SPLIT` |(Optional) For split keyboards, the number of LEDs connected on each half directly wired to `RGB_DI_PIN` |
 
 Then you should be able to use the keycodes below to change the RGB lighting to your liking.
 
@@ -124,6 +125,8 @@ The following options can be used to tweak the various animations:
 
 You can also modify the speeds that the different modes animate at:
 
+Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY).
+
 ```c
 // How long (in milliseconds) to wait between animation steps for each of the "Solid color breathing" animations
 const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
@@ -148,22 +151,119 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
 
 If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:
 
-|Function                           |Description                                                                                                                                                            |
-|-----------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------|
-|`rgblight_enable()`                |Turn LEDs on, based on their previous state                                                                                                                            |
-|`rgblight_enable_noeeprom()`       |Turn LEDs on, based on their previous state (not written to EEPROM)                                                                                                    |
-|`rgblight_disable()`               |Turn LEDs off                                                                                                                                                          |
-|`rgblight_disable_noeeprom()`      |Turn LEDs off (not written to EEPROM)                                                                                                                                  |
-|`rgblight_mode(x)`                 |Set the mode, if RGB animations are enabled                                                                                                                            |
-|`rgblight_mode_noeeprom(x)`        |Set the mode, if RGB animations are enabled (not written to EEPROM)                                                                                                    |
-|`rgblight_setrgb(r, g, b)`         |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                                                    |
-|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)                       |
-|`rgblight_sethsv(h, s, v)`         |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255                                                                   |
-|`rgblight_sethsv_noeeprom(h, s, v)`|Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM)                                           |
-|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|Function                                    |Description                                                                                                                                                   |
+|--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`rgblight_enable()`                         |Turn LEDs on, based on their previous state                                                                                                                   |
+|`rgblight_enable_noeeprom()`                |Turn LEDs on, based on their previous state (not written to EEPROM)                                                                                           |
+|`rgblight_disable()`                        |Turn LEDs off                                                                                                                                                 |
+|`rgblight_disable_noeeprom()`               |Turn LEDs off (not written to EEPROM)                                                                                                                         |
+|`rgblight_mode(x)`                          |Set the mode, if RGB animations are enabled                                                                                                                   |
+|`rgblight_mode_noeeprom(x)`                 |Set the mode, if RGB animations are enabled (not written to EEPROM)                                                                                           |
+|`rgblight_setrgb(r, g, b)`                  |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                                           |
+|`rgblight_setrgb_at(r, g, b, led)`          |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)              |
+|`rgblight_setrgb_range(r, g, b, start, end)`|Set a continuous range of LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_setrgb_master(r, g, b)`           |Set the LEDs on the master side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                      |
+|`rgblight_setrgb_slave(r, g, b)`            |Set the LEDs on the slave side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                       |
+|`rgblight_sethsv(h, s, v)`                  |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255                                                          |
+|`rgblight_sethsv_noeeprom(h, s, v)`         |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM)                                  |
+|`rgblight_sethsv_at(h, s, v, led)`          |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_sethsv_master(h, s, v)`           |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                 |
+|`rgblight_sethsv_slave(h, s, v)`            |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                  |
+|`rgblight_toggle()`                         |Toggle all LEDs between on and off                                                                                                                            |
+|`rgblight_toggle_noeeprom()`                |Toggle all LEDs between on and off (not written to EEPROM)                                                                                                    |
+|`rgblight_step()`                           |Change the mode to the next RGB animation in the list of enabled RGB animations                                                                               |
+|`rgblight_step_noeeprom()`                  |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                       |
+|`rgblight_step_reverse()`                   |Change the mode to the previous RGB animation in the list of enabled RGB animations                                                                           |
+|`rgblight_step_reverse_noeeprom()`          |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                   |
+|`rgblight_increase_hue()`                   |Increase the hue for all LEDs. This wraps around at maximum hue                                                                                               |
+|`rgblight_increase_hue_noeeprom()`          |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM)                                                                       |
+|`rgblight_decrease_hue()`                   |Decrease the hue for all LEDs. This wraps around at minimum hue                                                                                               |
+|`rgblight_decrease_hue_noeeprom()`          |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM)                                                                       |
+|`rgblight_increase_sat()`                   |Increase the saturation for all LEDs. This wraps around at maximum saturation                                                                                 |
+|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM)                                                         |
+|`rgblight_decrease_sat()`                   |Decrease the saturation for all LEDs. This wraps around at minimum saturation                                                                                 |
+|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM)                                                         |
+|`rgblight_increase_val()`                   |Increase the value for all LEDs. This wraps around at maximum value                                                                                           |
+|`rgblight_increase_val_noeeprom()`          |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM)                                                                   |
+|`rgblight_decrease_val()`                   |Decrease the value for all LEDs. This wraps around at minimum value                                                                                           |
+|`rgblight_decrease_val_noeeprom()`          |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM)                                                                   |
+|`rgblight_set_clipping_range(pos, num)`     |Set clipping Range                                                                                                                                            |
 
 Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list!
 
-## Hardware Modification
+## Changing the order of the LEDs
+
+If you want to make the logical order of LEDs different from the electrical connection order, you can do this by defining the `RGBLIGHT_LED_MAP` macro in your `config.h`.
+
+Normally, the contents of the LED buffer are output to the LEDs in the same order.
+<img src="https://user-images.githubusercontent.com/2170248/55743718-01866c80-5a6e-11e9-8134-25419928327a.JPG" alt="simple dicrect" width="50%"/>
+
+By defining `RGBLIGHT_LED_MAP` as in the example below, you can specify the LED with addressing in reverse order of the electrical connection order.
+
+```c
+// config.h
+
+#define RGBLED_NUM 4
+#define RGBLIGHT_LED_MAP { 3, 2, 1, 0 }
+
+```
+<img src="https://user-images.githubusercontent.com/2170248/55743725-08ad7a80-5a6e-11e9-83ed-126a2b0209fc.JPG" alt="simple mapped" width="50%"/>
+
+For keyboards that use the RGB LEDs as a backlight for each key, you can also define it as in the example below.
+
+```c
+// config.h
+
+#define RGBLED_NUM 30
+
+/* RGB LED Conversion macro from physical array to electric array */
+#define LED_LAYOUT( \
+    L00, L01, L02, L03, L04, L05,  \
+    L10, L11, L12, L13, L14, L15,  \
+    L20, L21, L22, L23, L24, L25,  \
+    L30, L31, L32, L33, L34, L35,  \
+    L40, L41, L42, L43, L44, L45 ) \
+  { \
+    L05, L04, L03, L02, L01, L00,   \
+    L10, L11, L12, L13, L14, L15,   \
+    L25, L24, L23, L22, L21, L20,   \
+    L30, L31, L32, L33, L34, L35,   \
+    L46, L45, L44, L43, L42, L41    \
+  }
+
+/* RGB LED logical order map */
+/* Top->Bottom, Right->Left */
+#define RGBLIGHT_LED_MAP LED_LAYOUT( \
+  25, 20, 15, 10,  5,  0,       \
+  26, 21, 16, 11,  6,  1,       \
+  27, 22, 17, 12,  7,  2,       \
+  28, 23, 18, 13,  8,  3,       \
+  29, 24, 19, 14,  9,  4 )
+
+```
+## Clipping Range
+
+Using the `rgblight_set_clipping_range()` function, you can prepare more buffers than the actual number of LEDs, and output some of the buffers to the LEDs. This is useful if you want the split keyboard to treat left and right LEDs as logically contiguous.
+
+You can set the Clipping Range by executing the following code.
+
+```c
+// some soruce
+  rgblight_set_clipping_range(3, 4);
+```
+<img src="https://user-images.githubusercontent.com/2170248/55743785-2bd82a00-5a6e-11e9-9d4b-1b4ffaf4932b.JPG" alt="clip direct" width="70%"/>
+
+In addition to setting the Clipping Range, you can use `RGBLIGHT_LED_MAP` together.
+
+```c
+// config.h
+#define RGBLED_NUM 8
+#define RGBLIGHT_LED_MAP { 7, 6, 5, 4, 3, 2, 1, 0 }
+
+// some soruce
+  rgblight_set_clipping_range(3, 4);
+```
+<img src="https://user-images.githubusercontent.com/2170248/55743747-119e4c00-5a6e-11e9-91e5-013203ffae8a.JPG" alt="clip mapped" width="70%"/>
 
 If your keyboard lacks onboard underglow LEDs, you may often be able to solder on an RGB LED strip yourself. You will need to find an unused pin to wire to the data pin of your LED strip. Some keyboards may break out unused pins from the MCU to make soldering easier. The other two pins, VCC and GND, must also be connected to the appropriate power pins.

docs/feature_space_cadet_shift.md

@@ -25,9 +25,13 @@ COMMAND_ENABLE = no
 
 By default Space Cadet assumes a US ANSI layout, but if your layout uses different keys for parentheses, you can redefine them in your `config.h`.
 You can also disable the rollover, allowing you to use the opposite Shift key to cancel the Space Cadet state in the event of an erroneous press, instead of emitting a pair of parentheses when the keys are released.
+Also, by default, the Space Cadet applies modifiers LSPO_MOD and RSPC_MOD to keys defined by LSPO_KEY and RSPC_KEY. You can override this behavior by redefining those variables in your `config.h`. You can also prevent the Space Cadet to apply a modifier by defining DISABLE_SPACE_CADET_MODIFIER in your `config.h`.
 
-|Define                        |Default      |Description                                                 |
-|------------------------------|-------------|------------------------------------------------------------|
-|`LSPO_KEY`                    |`KC_9`       |The keycode to send when Left Shift is tapped               |
-|`RSPC_KEY`                    |`KC_0`       |The keycode to send when Right Shift is tapped              |
-|`DISABLE_SPACE_CADET_ROLLOVER`|*Not defined*|If defined, use the opposite Shift key to cancel Space Cadet|
+|Define                        |Default      |Description                                                                     |
+|------------------------------|-------------|--------------------------------------------------------------------------------|
+|`LSPO_KEY`                    |`KC_9`       |The keycode to send when Left Shift is tapped                                   |
+|`RSPC_KEY`                    |`KC_0`       |The keycode to send when Right Shift is tapped                                  |
+|`LSPO_MOD`                    |`KC_LSFT`    |The keycode to send when Left Shift is tapped                                   |
+|`RSPC_MOD`                    |`KC_RSFT`    |The keycode to send when Right Shift is tapped                                  |
+|`DISABLE_SPACE_CADET_ROLLOVER`|*Not defined*|If defined, use the opposite Shift key to cancel Space Cadet                    |
+|`DISABLE_SPACE_CADET_MODIFIER`|*Not defined*|If defined, prevent the Space Cadet to apply a modifier to LSPO_KEY and RSPC_KEY|

docs/feature_tap_dance.md

@@ -185,29 +185,11 @@ Below is a specific example:
 
 ## Setup
 
-You will need a few things that can be used for 'Quad Function Tap-Dance'. The suggested setup is to create a user directory for yourself. This directory will contain rules.mk `<your_name>.c` and `<your_name>.h`. This directory should be called `<your_name>`, and located in the top level `users` directory. There should already be a few examples to look at there.
+You will need a few things that can be used for 'Quad Function Tap-Dance'. 
 
-### In `/qmk_firmware/users/<your_name>/rules.mk`
-
-Put the following:
-```c
-TAP_DANCE_ENABLE = yes
-SRC += your_name.c
-```
-
-Pretty simple. It is a nice way to keep some rules common on all your keymaps.
-
-
-### In `/qmk_firmware/users/<your_name>/<your_name>.h`
-
-You will need a few things in this file:
+You'll need to add these to the top of your `keymap.c` file, before your keymap. 
 
 ```c
-#pragma once
-
-#include "quantum.h"
-#include "process_keycode/process_tap_dance.h"
-
 typedef struct {
   bool is_press_action;
   int state;
@@ -234,18 +216,12 @@ int cur_dance (qk_tap_dance_state_t *state);
 //for the x tap dance. Put it here so it can be used in any keymap
 void x_finished (qk_tap_dance_state_t *state, void *user_data);
 void x_reset (qk_tap_dance_state_t *state, void *user_data);
+
 ```
 
-### In `/qmk_firmware/users/<your_name>/<your_name>.c`
-
-And then in your user's `.c` file you implement the functions above:
+Now, at the bottom of your `keymap.c` file, you'll need to add the following: 
 
 ```c
-#include "<your_name>.h"
-#include "quantum.h"
-#include "action.h"
-#include "process_keycode/process_tap_dance.h"
-
 /* Return an integer that corresponds to what kind of tap dance should be executed.
  *
  * How to figure out tap dance state: interrupted and pressed.
@@ -335,4 +311,89 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 };
 ```
 
-And then simply use `TD(X_CTL)` anywhere in your keymap after including `<your_name>.h`.
+And then simply use `TD(X_CTL)` anywhere in your keymap.
+
+If you want to implement this in your userspace, then you may want to check out how [DanielGGordon](https://github.com/qmk/qmk_firmware/tree/master/users/gordon) has implemented this in their userspace.
+
+### Example 5: Using tap dance for advanced mod-tap and layer-tap keys
+
+Tap dance can be used to emulate `MT()` and `LT()` behavior when the tapped code is not a basic keycode. This is useful to send tapped keycodes that normally require `Shift`, such as parentheses or curly braces—or other modified keycodes, such as `Control + X`.
+
+Below your layers and custom keycodes, add the following:
+
+```c
+// tapdance keycodes
+enum td_keycodes {
+  ALT_LP // Our example key: `LALT` when held, `(` when tapped. Add additional keycodes for each tapdance.
+};
+
+// define a type containing as many tapdance states as you need
+typedef enum {
+  SINGLE_TAP,
+  SINGLE_HOLD,
+  DOUBLE_SINGLE_TAP
+} td_state_t;
+
+// create a global instance of the tapdance state type
+static td_state_t td_state;
+
+// declare your tapdance functions:
+
+// function to determine the current tapdance state
+int cur_dance (qk_tap_dance_state_t *state);
+
+// `finished` and `reset` functions for each tapdance keycode
+void altlp_finished (qk_tap_dance_state_t *state, void *user_data);
+void altlp_reset (qk_tap_dance_state_t *state, void *user_data);
+```
+
+Below your `LAYOUT`, define each of the tapdance functions:
+
+```c
+// determine the tapdance state to return
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    if (state->interrupted || !state->pressed) { return SINGLE_TAP; }
+    else { return SINGLE_HOLD; }
+  }
+  if (state->count == 2) { return DOUBLE_SINGLE_TAP; }
+  else { return 3; } // any number higher than the maximum state value you return above
+}
+ 
+// handle the possible states for each tapdance keycode you define:
+
+void altlp_finished (qk_tap_dance_state_t *state, void *user_data) {
+  td_state = cur_dance(state);
+  switch (td_state) {
+    case SINGLE_TAP:
+      register_code16(KC_LPRN);
+      break;
+    case SINGLE_HOLD:
+      register_mods(MOD_BIT(KC_LALT)); // for a layer-tap key, use `layer_on(_MY_LAYER)` here
+      break;
+    case DOUBLE_SINGLE_TAP: // allow nesting of 2 parens `((` within tapping term
+      tap_code16(KC_LPRN);
+      register_code16(KC_LPRN);
+  }
+}
+
+void altlp_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (td_state) {
+    case SINGLE_TAP:
+      unregister_code16(KC_LPRN);
+      break;
+    case SINGLE_HOLD:
+      unregister_mods(MOD_BIT(KC_LALT)); // for a layer-tap key, use `layer_off(_MY_LAYER)` here
+      break;
+    case DOUBLE_SINGLE_TAP:
+      unregister_code16(KC_LPRN);
+  }
+}
+
+// define `ACTION_TAP_DANCE_FN_ADVANCED()` for each tapdance keycode, passing in `finished` and `reset` functions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [ALT_LP] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, altlp_finished, altlp_reset)
+};
+```
+
+Wrap each tapdance keycode in `TD()` when including it in your keymap, e.g. `TD(ALT_LP)`.

docs/feature_unicode.md

@@ -1,94 +1,156 @@
 # Unicode Support
 
-There are three Unicode keymap definition method available in QMK:
+There are three Unicode keymap definition methods available in QMK:
 
-## UNICODE_ENABLE
+## `UNICODE_ENABLE`
 
-Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in keymap file, where *n* is a 4 digit hexadecimal.
+Supports Unicode up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. The keycode function is `UC(c)` in the keymap file, where _c_ is the code point's number (preferably hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`.
 
-## UNICODEMAP_ENABLE
+## `UNICODEMAP_ENABLE`
 
-Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(n)` where *n* is the array index of the mapping table.
+Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(i)`, where _i_ is an array index into the mapping table. The table may contain at most 1024 entries.
 
-And you may want to have an enum to make reference easier.  So you'd want to add something like this to your keymap:
+You may want to have an enum to make referencing easier. So, you could add something like this to your keymap file:
 
 ```c
-enum unicode_name {
-  BANG, // ‽
-  IRONY, // ⸮
-  SNEK // snke 🐍
+enum unicode_names {
+  BANG,
+  IRONY,
+  SNEK,
 };
 
 const uint32_t PROGMEM unicode_map[] = {
-  [BANG]      = 0x0203D, // ‽
-  [IRONY]     = 0x02E2E, // ⸮
-  [SNEK]      = 0x1F40D // snke 🐍
-}:
+  [BANG]  = 0x203D,  // ‽
+  [IRONY] = 0x2E2E,  // ⸮
+  [SNEK]  = 0x1F40D, // 🐍
+};
 ```
 
-Make sure that the order for both matches.
+Then you can use `X(BANG)` etc. in your keymap.
 
-## UCIS_ENABLE
+## `UCIS_ENABLE`
 
-Supports Unicode up to 0xFFFFFFFF. As with `UNICODE_MAP`, you may want to maintain a mapping table in your keymap file.  However, there is no keycodes for this feature, you will have to add a keycode or function to call `qk_ucis_start()`. Once you've run that, you can just type the text for your unicode, and then hit space or enter to complete it, or ESC to cancel it. And if it matches an entry in your table, it will automatically "backspace" the trigger word (from your table) and then will input the unicode sequence.
+Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you will have to add a keycode or function that calls `qk_ucis_start()`. Once this function's been called, you can type the corresponding mnemonic for your character, then hit Space or Enter to complete it, or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode character inserted.
 
-For instance, you would need to have a table like this in your keymap:
+For instance, you would define a table like this in your keymap file:
 
 ```c
-const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
-(
- UCIS_SYM("poop", 0x1f4a9),
- UCIS_SYM("rofl", 0x1f923),
- UCIS_SYM("kiss", 0x1f619)
+const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE(
+  UCIS_SYM("poop", 0x1F4A9), // 💩
+  UCIS_SYM("rofl", 0x1F923), // 🤣
+  UCIS_SYM("kiss", 0x1F619)  // 😙
 );
 ```
 
-You run the function, and then type "rofl" and hit enter, it should backspace remove "rofl" and input the `0x1f923` unicode.
+You call `qk_ucis_start()`, then type "rofl" and hit Enter. QMK should erase the "rofl" text and input the laughing emoji.
 
 ### Customization
 
-There are several functions that you can add to your keymap to customize the functionality of this feature.
+There are several functions that you can define in your keymap to customize the functionality of this feature.
 
-* `void qk_ucis_start_user(void)` - This runs when you run the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
-* `void qk_ucis_success(uint8_t symbol_index)` - This runs when the unicode input has matched something, and has completed. Default doesn't do anything.
-* `void qk_ucis_symbol_fallback (void)` - This runs if the input text doesn't match anything.  The default function falls back to trying that input as a unicode code.
+* `void qk_ucis_start_user(void)` – This runs when you call the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
+* `void qk_ucis_success(uint8_t symbol_index)` – This runs when the input has matched something and has completed. By default, it doesn't do anything.
+* `void qk_ucis_symbol_fallback (void)` – This runs when the input doesn't match anything. By default, it falls back to trying that input as a Unicode code.
 
-The default code for these are:
+You can find the default implementations of these functions in [`process_ucis.c`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_ucis.c).
+
+## Input Modes
+
+Unicode input in QMK works by inputting a sequence of characters to the OS, sort of like a macro. Unfortunately, the way this is done differs for each platform. Specifically, each platform requires a different combination of keys to trigger Unicode input. Therefore, a corresponding input mode has to be set in QMK.
+
+The following input modes are available:
+
+* **`UC_OSX`**: Mac OS X built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with `UNICODEMAP`).
+
+  To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar.
+  By default, this mode uses the left Option key (`KC_LALT`), but this can be changed by defining [`UNICODE_OSX_KEY`](#input-key-configuration) with another keycode.
+
+  **Note:** Using the _Unicode Hex Input_ input source may disable some Option based shortcuts, such as: Option + Left Arrow (`moveWordLeftAndModifySelection`) and Option + Right Arrow  (`moveWordRightAndModifySelection`).
+
+* **`UC_LNX`**: Linux built-in IBus Unicode input. Supports code points up to `0x10FFFF` (all possible code points).
+
+  Enabled by default and works almost anywhere on IBus-enabled distros. Without IBus, this mode works under GTK apps, but rarely anywhere else.
+
+* **`UC_WIN`**: _(not recommended)_ Windows built-in hex numpad Unicode input. Supports code points up to `0xFFFF`.
+
+  To enable, create a registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad` and set its value to `1`. This can be done from the Command Prompt by running `reg add "HKCU\Control Panel\Input Method" -v EnableHexNumpad -t REG_SZ -d 1` with administrator privileges. Afterwards, reboot.
+  This mode is not recommended because of reliability and compatibility issues; use the `UC_WINC` mode instead.
+
+* **`UC_BSD`**: _(non implemented)_ Unicode input under BSD. Not implemented at this time. If you're a BSD user and want to help add support for it, please [open an issue on GitHub](https://github.com/qmk/qmk_firmware/issues).
+
+* **`UC_WINC`**: Windows Unicode input using [WinCompose](https://github.com/samhocevar/wincompose). As of v0.8.2, supports code points up to `0xFFFFF` (all currently assigned code points).
+
+  To enable, install the [latest release](https://github.com/samhocevar/wincompose/releases/latest). Once installed, WinCompose will automatically run on startup. Works reliably under all version of Windows supported by the app.
+  By default, this mode uses the right Alt key (`KC_RALT`), but this can be changed in the WinCompose settings and by defining [`UNICODE_WINC_KEY`](#input-key-configuration) with another keycode.
+
+### Switching Input Modes
+
+There are two ways to set the input mode for Unicode: by keycode or by function. Keep in mind that both methods write to persistent storage (EEPROM), and are loaded each time the keyboard starts. So once you've set it the first time, you don't need to set it again unless you want to change it, or you've reset the EEPROM settings.
+
+You can switch the input mode at any time by using one of the following keycodes. The easiest way is to add the ones you use to your keymap.
+
+|Keycode                |Alias    |Input mode   |Description                              |
+|-----------------------|---------|-------------|-----------------------------------------|
+|`UNICODE_MODE_FORWARD` |`UC_MOD` |             |Cycles forwards through the available modes. [(Disabled by default)](#input-method-cycling)|
+|`UNICODE_MODE_REVERSE` |`UC_RMOD`|             |Cycles forwards through the available modes. [(Disabled by default)](#input-method-cycling)|
+|`UNICODE_MODE_OSX`     |`UC_M_OS`|`UC_OSX`     |Switch to Mac OS X input.                |
+|`UNICODE_MODE_LNX`     |`UC_M_LN`|`UC_LNX`     |Switch to Linux input.                   |
+|`UNICODE_MODE_WIN`     |`UC_M_WI`|`UC_WIN`     |Switch to Windows input.                 |
+|`UNICODE_MODE_BSD`     |`UC_M_BS`|`UC_BSD`     |Switch to BSD input (not implemented).   |
+|`UNICODE_MODE_WINC`    |`UC_M_WC`|`UC_WINC`    |Switch to Windows input using WinCompose.|
+
+You can also switch the input mode by calling `set_unicode_input_mode(x)` in your code, where _x_ is one of the above input mode constants (e.g. `UC_LNX`). Since the function only needs to be called once, it's recommended that you do it in `eeconfig_init_user` (or a similar function). For example:
 
 ```c
-void qk_ucis_start_user(void) { // outputs keyboard emoji
-  unicode_input_start();
-  register_hex(0x2328);
-  unicode_input_finish();
-}
-
-void qk_ucis_success(uint8_t symbol_index) {
-}
-
-void qk_ucis_symbol_fallback (void) { // falls back to manual unicode entry
-  for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) {
-    uint8_t code = qk_ucis_state.codes[i];
-    register_code(code);
-    unregister_code(code);
-    wait_ms(UNICODE_TYPE_DELAY);
-  }
+void eeconfig_init_user(void) {
+  set_unicode_input_mode(UC_LNX);
 }
 ```
 
-## Unicode Input methods
+### Audio Feedback
 
-Unicode input in QMK works by inputting a sequence of characters to the OS,
-sort of like macro. Unfortunately, each OS has different ideas on how Unicode is input.
+If you have the [Audio feature](feature_audio.md) enabled on the board, you can set melodies to be played when you press the above keys. That way you can have some audio feedback when switching input modes.
 
-This is the current list of Unicode input method in QMK:
+For instance, you can add these definitions to your `config.h` file:
 
-* __UC_OSX__: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
-* __UC_OSX_RALT__: Same as UC_OSX, but sends the Right Alt key for unicode input
-* __UC_LNX__: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
-* __UC_WIN__: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
-* __UC_WINC__: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
+```c
+#define UNICODE_SONG_OSX  COIN_SOUND
+#define UNICODE_SONG_LNX  UNICODE_LINUX
+#define UNICODE_SONG_BSD  MARIO_GAMEOVER
+#define UNICODE_SONG_WIN  UNICODE_WINDOWS
+#define UNICODE_SONG_WINC UNICODE_WINDOWS
+```
 
-At some point, you need to call `set_unicode_input_mode(x)` to set the correct unicode method.  This sets the method that is used to send the unicode, and stores it in EEPROM, so you only need to call this once.
+### Additional Customization
+
+Because Unicode is such a large and variable feature, there are a number of options that you can customize to work better on your system.
+
+#### Start and Finish input functions
+
+The functions for starting and finishing Unicode input on your platform can be overridden locally. Possible uses include customizing input mode behavior if you don't use the default keys, or adding extra visual/audio feedback to Unicode input.
+
+* `void unicode_input_start(void)` – This sends the initial sequence that tells your platform to enter Unicode input mode. For example, it presses Ctrl+Shift+U on Linux and holds the Option key on Mac.
+* `void unicode_input_finish(void)` – This is called to exit Unicode input mode, for example by pressing Space or releasing the Option key.
+
+You can find the default implementations of these functions in [`process_unicode_common.c`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_unicode_common.c).
+
+
+#### Input Key Configuration
+
+Additionally, you can customize the keys used to trigger the unicode input for macOS and WinCompose by adding defines to your `config.h`
+
+```c
+#define UNICODE_OSX_KEY  KC_LALT
+#define UNICODE_WINC_KEY KC_RALT
+```
+
+#### Input Method Cycling
+
+Also, you can choose which input methods are availble for cycling through.  By default, this is disabled. But if you want to enabled it, then limiting it to just those modes makes sense.  Note that `UNICODE_SELECTED_MODES` define is comma delimited.
+
+```c
+#define UNICODE_SELECTED_MODES UC_OSX, UC_LNX, UC_WIN, UC_BSD, UC_WINC
+```
 
 ## `send_unicode_hex_string`
 
@@ -123,7 +185,7 @@ AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
 
 ### US International
 
-If you enable the US International layout on the system, it will use punctuation to accent the characters. 
+If you enable the US International layout on the system, it will use punctuation to accent the characters.
 
 For instance, typing "`a" will result in à.
 

docs/feature_userspace.md

@@ -201,27 +201,51 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
-  case KC_MAKE:
-    if (!record->event.pressed) {
-      SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP
-#if  (defined(BOOTLOADER_DFU) || defined(BOOTLOADER_LUFA_DFU) || defined(BOOTLOADER_QMK_DFU))
-       ":dfu "
-#elif defined(BOOTLOADER_HALFKAY)
-      ":teensy "
-#elif defined(BOOTLOADER_CATERINA)
-       ":avrdude "
-#endif
-        SS_TAP(X_ENTER));
-    }
-    return false;
-    break;
+    case KC_MAKE:  // Compiles the firmware, and adds the flash command based on keyboard bootloader
+            if (!record->event.pressed) {
+            uint8_t temp_mod = get_mods();
+            uint8_t temp_osm = get_oneshot_mods();
+            clear_mods(); clear_oneshot_mods();
+            SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP);
+    #ifndef FLASH_BOOTLOADER
+            if ( (temp_mod | temp_osm) & MOD_MASK_SHIFT ) 
+    #endif
+            { // 
+                #if defined(__arm__)  // only run for ARM boards
+                    SEND_STRING(":dfu-util");
+                #elif defined(BOOTLOADER_DFU) // only run for DFU boards
+                    SEND_STRING(":dfu");
+                #elif defined(BOOTLOADER_HALFKAY) // only run for teensy boards
+                    SEND_STRING(":teensy");
+                #elif defined(BOOTLOADER_CATERINA) // only run for Pro Micros
+                    SEND_STRING(":avrdude");
+                #endif // bootloader options
+            }
+            if ( (temp_mod | temp_osm) & MOD_MASK_CTRL) { 
+                SEND_STRING(" -j8 --output-sync"); 
+            }
+            SEND_STRING(SS_TAP(X_ENTER));
+            set_mods(temp_mod);
+        }
+        break;
+
   }
   return process_record_keymap(keycode, record);
 }
 ```
 
+For boards that may not have a shift button (such as on a macro pad), we need a way to always include the bootloader option.  To do that, add the following to the `rules.mk` in your userspace folder: 
+
+```make 
+ifeq ($(strip $(FLASH_BOOTLOADER)), yes)
+    OPT_DEFS += -DFLASH_BOOTLOADER
+endif
+```
+
 This will add a new `KC_MAKE` keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap>`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
 
-Additionally, this should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely (and will dump the HEX in the ".build" folder instead).
+Also, holding `shift` will add the appropriate flashing command (`:dfu`, `:teensy`, `:avrdude`, `:dfu-util`) for a majority of keyboards.  Holding `control` will add some commands that will speed up compiling time by processing multiple files at once. 
 
+And for the boards that lack a shift key, or that you want to always attempt the flashing part, you can add `FLASH_BOOTLOADER = yes` to the `rules.mk` of that keymap.
 
+?> This should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely. And this doesn't support BootloadHID or mdloader. 

docs/feature_velocikey.md

@@ -0,0 +1,30 @@
+# Velocikey
+
+Velocikey is a feature that lets you control the speed of lighting effects (like the Rainbow Swirl effect) with the speed of your typing. The faster you type, the faster the lights will go!
+
+## Usage
+For Velocikey to take effect, there are two steps. First, when compiling your keyboard, you'll need to set `VELOCIKEY_ENABLE=yes` in `rules.mk`, e.g.:
+
+```
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+STENO_ENABLE = no
+EXTRAKEY_ENABLE = yes
+VELOCIKEY_ENABLE = yes
+```
+
+Then, while using your keyboard, you need to also turn it on with the VLK_TOG keycode, which toggles the feature on and off.
+
+The following light effects will all be controlled by Velocikey when it is enabled:
+ - RGB Breathing
+ - RGB Rainbow Mood
+ - RGB Rainbow Swirl
+ - RGB Snake
+ - RGB Knight
+
+Support for LED breathing effects is planned but not available yet.
+
+ As long as Velocikey is enabled, it will control the speed regardless of any other speed setting that your RGB lights are currently on.
+
+ ## Configuration
+ Velocikey doesn't currently support any configuration via keyboard settings. If you want to adjust something like the speed increase or decay rate, you would need to edit `velocikey.c` and adjust the values there to achieve the kinds of speeds that you like.

docs/features.md

@@ -11,11 +11,13 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Combos](feature_combo.md) - Custom actions for multiple key holds.
 * [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic").
 * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
+* [Encoders](feature_encoders.md) - Rotary encoders! 
 * [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. 
 * [HD44780 LCD Display](feature_hd44780.md) - Support for LCD character displays using the HD44780 standard.
 * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state.
 * [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout.
 * [Leader Key](feature_leader_key.md) - Tap the leader key followed by a sequence to trigger custom behavior.
+* [LED Matrix](feature_led_matrix.md) - LED Matrix single color lights for per key lighting (Single Color, not RGB).
 * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key.
 * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard.
 * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it.

docs/flashing.md

@@ -49,9 +49,18 @@ To generate this bootloader, use the `bootloader` target, eg `make planck/rev4:d
 
 To generate a production-ready .hex file (containing the application and the bootloader), use the `production` target, eg `make planck/rev4:default:production`.
 
+### DFU commands
+
+There are a number of DFU commands that you can use to flash firmware to a DFU device:
+
+* `:dfu` - This is the normal option and waits until a DFU device is available, and then flashes the firmware. This will check every 5 seconds, to see if a DFU device has appeared.
+* `:dfu-ee` - This flashes an `eep` file instead of the normal hex.  This is uncommon. 
+* `:dfu-split-left` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
+* `:dfu-split-right` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
+
 ## Caterina
 
-Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina.
+Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/ArduinoCore-avr/tree/master/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina.
 
 To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`:
 
@@ -84,6 +93,7 @@ or if you want to flash multiple boards, use the following command
 
 When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
 
+
 ## Halfkay
 
 Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0).
@@ -131,3 +141,12 @@ Flashing sequence:
     * You will receive a warning about the DFU signature; Just ignore it
 4. Reset the device into application mode (may be done automatically)
     * If you are building from command line (e.g. `make planck/rev6:default:dfu-util`), make sure that `:leave` is passed to the `DFU_ARGS` variable inside your `rules.mk` (e.g. `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) so that your device resets after flashing
+
+### STM32 Commands
+
+There are a number of DFU commands that you can use to flash firmware to a STM32 device:
+
+* `:dfu-util` - The default command for flashing to STM32 devices. 
+* `:dfu-util-wait` - This works like the default command, but it gives you a (configurable) 10 second timeout before it attempts to flash the firmware.  You can use `TIME_DELAY=20` from the command line to change the timeout.
+   * Eg: `make <keyboard>:<keymap>:dfu-util TIME_DELAY=5`
+* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 

docs/getting_started_build_tools.md

@@ -4,7 +4,9 @@ This page describes setting up the build environment for QMK. These instructions
 
 <!-- FIXME: We should have ARM instructions somewhere. -->
 
-Note: If it is your first time here, Check out the "Complete Newbs guide" instead
+**Note:** If this is your first time here, check out the [Complete Newbs Guide](newbs.md) page.
+
+Before continuing, double check that your submodules (third-party libraries) are up to date by running `make git-submodule`.
 
 ## Linux
 
@@ -41,6 +43,10 @@ Debian / Ubuntu example:
 Fedora / Red Hat example:
 
     sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
+    
+Arch / Manjaro example:
+
+    pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git dfu-programmer dfu-util
 
 ## Nix
 
@@ -123,24 +129,27 @@ If you have trouble and want to ask for help, it is useful to generate a *Win_Ch
 
 ## Docker
 
-If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker](https://www.docker.com/products/docker), run the following command at the root of the QMK folder to build a keyboard/keymap:
-
+If this is a bit complex for you, Docker might be the turnkey solution you need. After installing [Docker CE](https://docs.docker.com/install/#supported-platforms), run the following command from the `qmk_firmware` directory to build a keyboard/keymap:
 ```bash
-# You'll run this every time you want to build a keymap
-# modify the keymap and keyboard assignment to compile what you want
-# defaults are ergodox/default
+util/docker_build.sh keyboard:keymap
+# For example: util/docker_build.sh ergodox_ez:steno
+```
+This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
 
-docker run -e keymap=gwen -e keyboard=ergodox_ez --rm -v $('pwd'):/qmk:rw edasque/qmk_firmware
+You can also start the script without any parameters, in which case it will ask you to input the build parameters one by one, which you may find easier to use:
+```bash
+util/docker_build.sh
+# Reads parameters as input (leave blank for defaults)
 ```
 
-On Windows Docker seems to have issues with the VOLUME tag in Dockerfile, and `$('pwd')` won't print a Windows compliant path; use full path instead, like this:
-
+There is also support for building _and_ flashing the keyboard straight from Docker by specifying the `target` as well:
 ```bash
-docker run -e keymap=default -e keyboard=ergodox_ez --rm -v D:/Users/Sacapuces/Documents/Repositories/qmk:/qmk:rw edasque/qmk_firmware
-
+util/docker_build.sh keyboard:keymap:target
+# For example: util/docker_build.sh planck/rev6:default:dfu-util
 ```
+If you're on Linux, this should work out of the box. On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use [QMK Toolbox](https://github.com/qmk/qmk_toolbox) instead.
 
-This will compile the targeted keyboard/keymap and leave it in your QMK directory for you to flash.
+!> Docker for Windows requires [Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v) to be enabled. This means that it cannot work on versions of Windows which don't have Hyper-V, such as Windows 7, Windows 8 and **Windows 10 Home**.
 
 ## Vagrant
 If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [vagrant guide](getting_started_vagrant.md).

docs/getting_started_make_guide.md

@@ -93,19 +93,17 @@ This enables MIDI sending and receiving with your keyboard. To enter MIDI send m
 
 `UNICODE_ENABLE`
 
-This allows you to send unicode symbols via `UC(<unicode>)` in your keymap. Only codes up to 0x7FFF are currently supported.
+This allows you to send Unicode characters using `UC(<code point>)` in your keymap. Code points up to `0x7FFF` are supported. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji.
 
 `UNICODEMAP_ENABLE`
 
-This allows sending unicode symbols using `X(<unicode>)` in your keymap. Codes
-up to 0xFFFFFFFF are supported, including emojis. You will need to maintain
-a separate mapping table in your keymap file.
+This allows you to send Unicode characters using `X(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported.
 
-Known limitations:
-- Under Mac OS, only codes up to 0xFFFF are supported.
-- Under Linux ibus, only codes up to 0xFFFFF are supported (but anything important is still under this limit for now).
+`UCIS_ENABLE`
 
-Characters out of range supported by the OS will be ignored.
+This allows you to send Unicode characters by inputting a mnemonic corresponding to the character you want to send. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported.
+
+For further details, as well as limitations, see the [Unicode page](feature_unicode.md).
 
 `BLUETOOTH_ENABLE`
 
@@ -117,7 +115,7 @@ This allows you output audio on the C6 pin (needs abstracting). See the [audio p
 
 `FAUXCLICKY_ENABLE`
 
-Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as AUDIO_ENABLE.
+Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as `AUDIO_ENABLE`.
 
 `VARIABLE_TRACE`
 
@@ -137,6 +135,18 @@ This enables [key lock](feature_key_lock.md). This consumes an additional 260 by
 
 This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 
+`SPLIT_TRANSPORT`
+
+As there is no standard split communication driver for ARM-based split keyboards yet, `SPLIT_TRANSPORT = custom` must be used for these. It will prevent the standard split keyboard communication code (which is AVR-specific) from being included, allowing a custom implementation to be used.
+
+`CUSTOM_MATRIX`
+
+Lets you replace the default matrix scanning routine with your own code. You will need to provide your own implementations of matrix_init() and matrix_scan().
+
+`DEBOUNCE_TYPE`
+
+Lets you replace the default key debouncing routine with an alternative one. If `custom` you will need to provide your own implementation.
+
 ## Customizing Makefile Options on a Per-Keymap Basis
 
 If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.

docs/hand_wire.md

@@ -185,11 +185,18 @@ When you're done with the columns, start with the rows in the same process, from
 
 As you move along, be sure that the Teensy is staying in place - recutting and soldering the wires is a pain!
 
+## Additional guides
+
+If you're more of a visual learner, or want some additional tips and something more to follow along, these two visual step by step guides may be helpful:
+
+- [BrownFox's step by step guide](https://deskthority.net/viewtopic.php?f=7&t=6050)
+- [Cribbit's modern hand wiring guide](https://geekhack.org/index.php?topic=87689.0)
+
 # Getting Some Basic Firmware Set Up
 
 From here, you should have a working keyboard once you program a firmware. Before we attach the Teensy permanently to the keyboard, let's quickly get some firmware loaded onto the Teensy so we can test each keyswitch.
 
-To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/).
+To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/) (paid) or [Visual Studio Code](https://code.visualstudio.com) (free).
 
 The first thing we're going to do is create a new project using the script in the root directory of the firmware. In your terminal, run this command with `<project_name>` replaced by the name of your project - it'll need to be different from any other project in the `keyboards/` folder:
 
@@ -209,7 +216,7 @@ Farther down are `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`. Change their definitio
 
 ### `<project_name>.h`
 
-The next file you'll want to look at is `<project_name>.h`. You're going to want to rewrite the `KEYMAP` definition - the format and syntax here is extremely important, so pay attention to how things are setup. The first half of the definition are considered the arguments - this is the format that you'll be following in your keymap later on, so you'll want to have as many k*xy* variables here as you do keys. The second half is the part that the firmware actually looks at, and will contain gaps depending on how you wired your matrix.
+The next file you'll want to look at is `<project_name>.h`. You're going to want to rewrite the `LAYOUT` definition - the format and syntax here is extremely important, so pay attention to how things are setup. The first half of the definition are considered the arguments - this is the format that you'll be following in your keymap later on, so you'll want to have as many k*xy* variables here as you do keys. The second half is the part that the firmware actually looks at, and will contain gaps depending on how you wired your matrix.
 
 We'll dive into how this will work with the following example. Say we have a keyboard like this:
 
@@ -231,10 +238,10 @@ This can be described by saying the top row is 3 1u keys, and the bottom row is
     └─────┴─────┘
 ```
 
-The middle column is unused on the bottom row in this example. Our `KEYMAP` definition would look like this:
+The middle column is unused on the bottom row in this example. Our `LAYOUT` definition would look like this:
 
 ```
-    #define KEYMAP( \
+    #define LAYOUT( \
         k00, k01, k02, \
           k10,  k11,   \
     ) \
@@ -256,10 +263,10 @@ Let's say that instead, we wired our keyboard like this (a fair thing to do):
     └─────┴─────┘
 ```
 
-This would require our `KEYMAP` definition to look like this:
+This would require our `LAYOUT` definition to look like this:
 
 ```
-    #define KEYMAP( \
+    #define LAYOUT( \
         k00, k01, k02, \
           k10,  k11,   \
     ) \
@@ -269,7 +276,7 @@ This would require our `KEYMAP` definition to look like this:
     }
 ```
 
-Notice how the `k11` and `KC_NO` switched places to represent the wiring, and the unused final column on the bottom row. Sometimes it'll make more sense to put a keyswitch on a particular column, but in the end, it won't matter, as long as all of them are accounted for. You can use this process to write out the `KEYMAP` for your entire keyboard - be sure to remember that your keyboard is actually backwards when looking at the underside of it.
+Notice how the `k11` and `KC_NO` switched places to represent the wiring, and the unused final column on the bottom row. Sometimes it'll make more sense to put a keyswitch on a particular column, but in the end, it won't matter, as long as all of them are accounted for. You can use this process to write out the `LAYOUT` for your entire keyboard - be sure to remember that your keyboard is actually backwards when looking at the underside of it.
 
 ### `keymaps/<variant>/default.c`
 
@@ -291,7 +298,7 @@ This can be accomplished by using the following `keymaps` definition:
 
 ```
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = KEYMAP( /* Base */
+    [0] = LAYOUT( /* Base */
       KC_A,  KC_1,  KC_H, \
         KC_TAB,  KC_SPC   \
     ),
@@ -300,7 +307,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 Note that the layout of the keycodes is similar to the physical layout of our keyboard - this make it much easier to see what's going on. A lot of the keycodes should be fairly obvious, but for a full list of them, check out [Keycodes](keycodes.md) - there are also a lot of aliases to condense your keymap file.
 
-It's also important to use the `KEYMAP` function we defined earlier - this is what allows the firmware to associate our intended readable keymap with the actual wiring.
+It's also important to use the `LAYOUT` function we defined earlier - this is what allows the firmware to associate our intended readable keymap with the actual wiring.
 
 ## Compiling Your Firmware
 

docs/hardware_avr.md

@@ -87,12 +87,30 @@ Once you've defined the size of your matrix you need to define which pins on you
 
 The number of `MATRIX_ROW_PINS` entries must be the same as the number you assigned to `MATRIX_ROWS`, and likewise for `MATRIX_COL_PINS` and `MATRIX_COLS`. You do not have to specify `UNUSED_PINS`, but you can if you want to document what pins are open.
 
-Finally, you can specify the direction your diodes point. This can be `COL2ROW`, `ROW2COL`, or `CUSTOM_MATRIX`.
+Finally, you can specify the direction your diodes point. This can be `COL2ROW` or `ROW2COL`.
 
 ```c
 #define DIODE_DIRECTION COL2ROW
 ```
 
+#### Direct Pin Matrix
+To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.
+
+```c
+// #define MATRIX_ROW_PINS { D0, D5 }
+// #define MATRIX_COL_PINS { F1, F0, B0 }
+#define DIRECT_PINS { \
+    { F1, E6, B0, B2, B3 }, \
+    { F5, F0, B1, B7, D2 }, \
+    { F6, F7, C7, D5, D3 }, \
+    { B5, C6, B6, NO_PIN, NO_PIN } \
+}
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+//#define DIODE_DIRECTION
+```
+
 ### Backlight Configuration
 
 By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md).

docs/hardware_keyboard_guidelines.md

@@ -1,20 +1,104 @@
 # QMK Keyboard Guidelines
 
-We welcome all keyboard projects into QMK, but ask that you try to stick to a couple guidelines that help us keep things organised and consistent.
+Since starting, QMK has grown by leaps and bounds thanks to people like you who contribute to creating and maintaining our community keyboards. As we've grown we've discovered some patterns that work well, and ask that you conform to them to make it easier for other people to benefit from your hard work.
+
 
 ## Naming Your Keyboard/Project
 
-All names should be lowercase alphanumeric, and separated by an underscore (`_`), but not begin with one. Your directory and your `.h` and `.c` files should have exactly the same name. All folders should follow the same format. `test`, `keyboard`, and `all` are reserved by make and are not a valid name for a keyboard.
+All keyboard names are in lower case, consisting only of letters, numbers, and underscore (`_`). Names may not begin with an underscore. Forward slash (`/`) is used as a sub-folder separation character.
 
-## `readme.md`
+The names `test`, `keyboard`, and `all` are reserved for make commands and may not be used as a keyboard or subfolder name.
 
-All projects need to have a `readme.md` file that explains what the keyboard is, who made it, where it is available, and links to more information. Please follow the [published template](documentation_templates.md#keyboard-readmemd-template).
+Valid Examples:
+
+* `412_64`
+* `chimera_ortho`
+* `clueboard/66/rev3`
+* `planck`
+* `v60_type_r`
+
+## Sub-folders
+
+QMK uses sub-folders both for organization and to share code between revisions of the same keyboard. You can nest folders up to 4 levels deep:
+
+    qmk_firmware/keyboards/top_folder/sub_1/sub_2/sub_3/sub_4
+
+If a sub-folder has a `rules.mk` file it will be considered a compilable keyboard. It will be available in QMK Configurator and tested with `make all`. If you are using a folder to organize several keyboards from the same maker you should not have a `rules.mk` file.
+
+Example:
+
+Clueboard uses sub-folders for both purposes, organization and keyboard revisions.
+
+* [`qmk_firmware`](https://github.com/qmk/qmk_firmware/tree/master)
+  * [`keyboards`](https://github.com/qmk/qmk_firmware/tree/master/keyboards)
+    * [`clueboard`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard)  ← This is the organization folder, there's no `rules.mk` file
+      * [`60`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/60)  ← This is a compilable keyboard, it has a `rules.mk` file
+      * [`66`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66) ← This is also compilable- it uses `DEFAULT_FOLDER` to specify `rev3` as the default revision
+        * [`rev1`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev1) ← compilable: `make clueboard/66/rev1`
+        * [`rev2`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev2) ← compilable: `make clueboard/66/rev2`
+        * [`rev3`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev3) ← compilable: `make clueboard/66/rev3` or `make clueboard/66`
+
+## Keyboard Folder Structure
+
+Your keyboard should be located in `qmk_firmware/keyboards/` and the folder name should be your keyboard's name as described in the previous section. Inside this folder should be several files:
+
+* `readme.md`
+* `info.json`
+* `config.h`
+* `rules.mk`
+* `<keyboard_name>.c`
+* `<keyboard_name>.h`
+
+### `readme.md`
+
+All projects need to have a `readme.md` file that explains what the keyboard is, who made it and where it's available. If applicable, it should also contain links to more information, such as the maker's website. Please follow the [published template](documentation_templates.md#keyboard-readmemd-template).
+
+### `info.json`
+
+This file is used by the [QMK API](https://github.com/qmk/qmk_api). It contains the information [QMK Configurator](https://config.qmk.fm/) needs to display a representation of your keyboard. You can also set metadata here. For more information see the [reference page](reference_info_json.md).
+
+### `config.h`
+
+All projects need to have a `config.h` file that sets things like the matrix size, product name, USB VID/PID, description and other settings. In general, use this file to set essential information and defaults for your keyboard that will always work.
+
+### `rules.mk`
+
+The presence of this file means that the folder is a keyboard target and can be used in `make` commands. This is where you setup the build environment for your keyboard and configure the default set of features.
+
+### `<keyboard_name.c>`
+
+This is where you will write custom code for your keyboard. Typically you will write code to initialize and interface with the hardware in your keyboard. If your keyboard consists of only a key matrix with no LEDs, speakers, or other auxillary hardware this file can be blank.
+
+The following functions are typically defined in this file:
+
+* `void matrix_init_kb(void)`
+* `void matrix_scan_kb(void)`
+* `bool process_record_kb(uint16_t keycode, keyrecord_t *record)`
+* `void led_set_kb(uint8_t usb_led)`
+
+### `<keyboard_name.h>`
+
+This file is used to define the matrix for your keyboard. You should define at least one C macro which translates an array into a matrix representing the physical switch matrix for your keyboard. If it's possible to build your keyboard with multiple layouts you should define additional macros.
+
+If you have only a single layout you should call this macro `LAYOUT`.
+
+When defining multiple layouts you should have a base layout, named `LAYOUT_all`, that supports all possible switch positions on your matrix, even if that layout is impossible to build physically. This is the macro you should use in your `default` keymap. You should then have additional keymaps named `default_<layout>` that use your other layout macros. This will make it easier for people to use the layouts you define.
+
+Layout macro names are entirely lowercase, except for the word `LAYOUT` at the front.
+
+As an example, if you have a 60% PCB that supports ANSI and ISO you might define the following layouts and keymaps:
+
+| Layout Name | Keymap Name | Description |
+|-------------|-------------|-------------|
+| LAYOUT_all | default | A layout that supports both ISO and ANSI |
+| LAYOUT_ansi | default_ansi | An ANSI layout |
+| LAYOUT_iso | default_iso | An ISO layout |
 
 ## Image/Hardware Files
 
-In an effort to keep the repo size down, we're no longer accepting images of any format in the repo, with few exceptions. Hosting them elsewhere (imgur) and linking them in the `readme.md` is the preferred method.
+In an effort to keep the repo size down we're no longer accepting binary files of any format, with few exceptions. Hosting them elsewhere (such as <https://imgur.com>) and linking them in the `readme.md` is preferred.
 
-Any sort of hardware file (plate, case, pcb) can't be stored in qmk_firmware, but we have the [qmk.fm repo](https://github.com/qmk/qmk.fm) where such files (as well as in-depth info) can be stored and viewed on [qmk.fm](http://qmk.fm). Downloadable files are stored in `/<keyboard>/` (name follows the same format as above) which are served at `http://qmk.fm/<keyboard>/`, and pages are generated from `/_pages/<keyboard>/` which are served at the same location (.md files are generated into .html files through Jekyll). Check out the `lets_split` directory for an example.
+Hardware files (such as plates, cases, pcb) can be contributed to the [qmk.fm repo](https://github.com/qmk/qmk.fm) and they will be made available on [qmk.fm](http://qmk.fm). Downloadable files are stored in `/<keyboard>/` (name follows the same format as above) which are served at `http://qmk.fm/<keyboard>/`, and pages are generated from `/_pages/<keyboard>/` which are served at the same location (.md files are generated into .html files through Jekyll). Check out the `lets_split` folder for an example.
 
 ## Keyboard Defaults
 
@@ -32,77 +116,6 @@ If your keyboard does not have 2 shift keys you should provide a working default
 
 As documented on [Customizing Functionality](custom_quantum_functions.md) you can define custom functions for your keyboard. Please keep in mind that your users may want to customize that behavior as well, and make it possible for them to do that. If you are providing a custom function, for example `process_record_kb()`, make sure that your function calls the `_user()` version of the call too. You should also take into account the return value of the `_user()` version, and only run your custom code if the user returns `true`.
 
-## Keyboard Metadata
-
-As QMK grows so does the ecosystem surrounding QMK. To make it easier for projects in that ecosystem to tie into QMK as we make changes we are developing a metadata system to expose information about keyboards in QMK.
-
-You can create `info.json` files at every level under `qmk_firmware/keyboards/<name>` to specify this metadata. These files are combined, with more specific files overriding keys in less specific files. This means you do not need to duplicate your metadata information. For example, `qmk_firmware/keyboards/clueboard/info.json` specifies `manufacturer` and `maintainer`, while `qmk_firmware/keyboards/clueboard/66/info.json` specifies more specific information about Clueboard 66%.
-
-### `info.json` Format
-
-The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
-
-* `keyboard_name`
-  * A free-form text string describing the keyboard.
-  * Example: `Clueboard 66%`
-* `url`
-  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
-* `maintainer`
-  * GitHub username of the maintainer, or `qmk` for community maintained boards
-* `width`
-  * Width of the board in Key Units
-* `height`
-  * Height of the board in Key Units
-* `layouts`
-  * Physical Layout representations. See the next section for more detail.
-
-#### Layout Format
-
-Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
-
-* `width`
-  * Optional: The width of the layout in Key Units
-* `height`
-  * Optional: The height of the layout in Key Units
-* `key_count`
-  * **Required**: The number of keys in this layout
-* `layout`
-  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
-
-#### Key Dictionary Format
-
-Each Key Dictionary in a layout describes the physical properties of a key. If you are familiar with the Raw Code for <http://keyboard-layout-editor.com> you will find many of the concepts the same. We re-use the same key names and layout choices wherever possible, but unlike keyboard-layout-editor each key is stateless, inheriting no properties from the keys that came before it.
-
-All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
-
-* `X`
-  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
-* `Y`
-  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
-* `W`
-  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
-* `H`
-  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
-* `R`
-  * How many degrees clockwise to rotate the key.
-* `RX`
-  * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x`
-* `RY`
-  * The absolute position of the point to rotate the key around in the vertical axis. Default: `y`
-* `KS`
-  * Key Shape: define a polygon by providing a list of points, in Key Units.
-  * **Important**: These are relative to the top-left of the key, not absolute.
-  * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]`
-
-### How is the Metadata Exposed?
-
-This metadata is primarily used in two ways:
-
-* To allow web-based configurators to dynamically generate UI
-* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter.
-
-Configurator authors can see the [QMK Compiler](https://docs.compile.qmk.fm/api_docs.html) docs for more information on using the JSON API.
-
 ## Non-Production/Handwired Projects
 
 We're happy to accept any project that uses QMK, including prototypes and handwired ones, but we have a separate `/keyboards/handwired/` folder for them, so the main `/keyboards/` folder doesn't get overcrowded. If a prototype project becomes a production project at some point in the future, we'd be happy to move it to the main `/keyboards/` folder!

docs/how_keyboards_work.md

@@ -12,7 +12,7 @@ place:
 ``` text
 +------+         +-----+       +----------+      +----------+     +----+
 | User |-------->| Key |------>| Firmware |----->| USB wire |---->| OS |
-+------+         +-----+       +----------+      +----------+     |----+
++------+         +-----+       +----------+      +----------+     +----+
 ```
 
 This scheme is a very simple view of what's going on, and more details follow

docs/i2c_driver.md

@@ -12,7 +12,7 @@ The I2C Master drivers used in QMK have a set of common functions to allow porta
 |`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
 |`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
 |`uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
-|`uint8_t i2c_stop(uint16_t timeout);`                                                                             |Stops the I2C driver.                                                                                                                                                        |
+|`uint8_t i2c_stop(void);`                                                                                         |Ends an I2C transaction.                                                                                                                                                     |
 
 ### Function Return
 
@@ -33,8 +33,8 @@ The following defines can be used to configure the I2C master driver.
 
 |Variable          |Description                                        |Default|
 |------------------|---------------------------------------------------|-------|
-|`#F_SCL`          |Clock frequency in Hz                              |400KHz |
-|`#Prescaler`      |Divides master clock to aid in I2C clock selection |1      |
+|`F_SCL`           |Clock frequency in Hz                              |400KHz |
+|`Prescaler`       |Divides master clock to aid in I2C clock selection |1      |
 
 AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required.
 
@@ -63,20 +63,24 @@ Lastly, we need to assign the correct GPIO pins depending on the I2C hardware dr
 
 By default the I2C1 hardware driver is assumed to be used. If another hardware driver is used,  `#define I2C_DRIVER I2CDX` should be added to the `config.h` file with X being the number of hardware driver used. For example is I2C3 is enabled, the `config.h` file should contain `#define I2C_DRIVER I2CD3`. This aligns the QMK I2C driver with the Chibios I2C driver.
 
-STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C.
+STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C. You can use these defines to set your i2c pins:
 
-This can be changed by declaring the `i2c_init` function which intentionally has a weak attribute. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
+| Variable    | Description                                  | Default |
+|-------------|----------------------------------------------|---------|
+| `I2C1_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) | `GPIOB` |
+| `I2C1_SCL`  | The pin number for the SCL pin (0-9)         | `6`     |
+| `I2C1_SDA`  | The pin number for the SDA pin (0-9)         | `7`     |
+
+You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
 
 ```C
 void i2c_init(void)
 {
   setPinInput(B6); // Try releasing special pins for a short time
   setPinInput(B7);
-  chThdSleepMilliseconds(10); // Wait for the release to happen
+  wait_ms(10); // Wait for the release to happen
 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function
   palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function
 }
 ```
-
-

docs/index.html

@@ -17,7 +17,7 @@
       name: 'QMK Firmware',
       nameLink: 'https://qmk.fm/',
       repo: 'qmk/qmk_firmware',
-      loadSidebar: true,
+      loadSidebar: '_summary.md',
       auto2top: true,
       formatUpdated: '{YYYY}/{MM}/{DD} {HH}:{mm}',
       search: {

docs/internals_gpio_control.md

@@ -1,6 +1,6 @@
 # GPIO Control
 
-QMK has a GPIO control abstraction layer which is micro-controller agnostic. This is done to allow easy access to pin control across different platforms.
+QMK has a GPIO control abstraction layer which is microcontroller agnostic. This is done to allow easy access to pin control across different platforms.
 
 ## Functions
 
@@ -17,7 +17,7 @@ The following functions can provide basic control of GPIOs and are found in `qua
 |`writePin(pin, level)`|Set pin level, assuming it is an output                           |
 |`readPin(pin)`        |Returns the level of the pin                                      |
 
-## Advance settings
+## Advanced Settings
 
-Each micro-controller can have multiple advance settings regarding its GPIO. This abstraction layer does not limit the use of architecture specific functions. Advance users should consult the datasheet of there desired device and include any needed libraries. For AVR the standard avr/io.h library is used and for STM32 the Chibios [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
+Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
 

docs/isp_flashing_guide.md

@@ -53,7 +53,7 @@ This is pretty straight-forward - we'll be connecting like-things to like-things
 The only difference between the .hex files below is which pin is connected to RESET. You can use them on other boards as well, as long as you're aware of the pins being used. If for some reason neither of these pins are available, [create an issue](https://github.com/qmk/qmk_firmware/issues/new), and we can generate one for you!
 
 * Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`)
-* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_mico_ISP_B6_10.hex) (`B6/10`)
+* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_micro_ISP_B6_10.hex) (`B6/10`)
 
 **Flash your Teenys/Pro Micro with one of these and continue - you won't need the file after flashing your ISP device.**
 
@@ -63,6 +63,7 @@ If you just want to get things back to normal, you can flash only a bootloader f
 
 * [`atmega32u4`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) - Most keyboards, Planck Rev 1-5, Preonic Rev 1-2
 * [`at90usb1286`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128x_1_0_1.hex) - Planck Light Rev 1
+* [`atmega32a`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32a_1_0_0.hex) - jj40
 
 If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU =` line will have the value you need. It may differ between different versions of the board.
 
@@ -113,6 +114,10 @@ Since our keyboard uses an `atmega32u4` (common), that is the chip we'll specify
 
     avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i
 
+If your board uses an `atmega32a` (e.g. on a jj40), the command is this (the extra code at the end sets the fuses correctly):
+
+	avrdude -c avrisp -P COM3 -p atmega32 -U flash:w:main.hex:i -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m
+
 You should see a couple of progress bars, then you should see:
 
     avrdude: verifying ...

docs/keycode.txt

@@ -1,263 +0,0 @@
-Keycode Symbol Table
-====================
-Keycodes are defined in `common/keycode.h`.
-Range of 00-A4 and E0-E7 are identical with HID Usage:
-<http://www.usb.org/developers/hidpage/Hut1_12v2.pdf>
-Virtual keycodes are defined out of above range to support special actions.
-
-
-Keycode Symbol      Short name      Description
---------------------------------------------------------------------------------
-KC_NO                               00 Reserved (no event indicated)
-KC_ROLL_OVER                        01 Keyboard ErrorRollOver
-KC_POST_FAIL                        02 Keyboard POSTFail
-KC_UNDEFINED                        03 Keyboard ErrorUndefined
-KC_A                                04 Keyboard a and A
-KC_B                                05 Keyboard b and B
-KC_C                                06 Keyboard c and C
-KC_D                                07 Keyboard d and D
-KC_E                                08 Keyboard e and E
-KC_F                                09 Keyboard f and F
-KC_G                                0A Keyboard g and G
-KC_H                                0B Keyboard h and H
-KC_I                                0C Keyboard i and I
-KC_J                                0D Keyboard j and J
-KC_K                                0E Keyboard k and K
-KC_L                                0F Keyboard l and L
-KC_M                                10 Keyboard m and M
-KC_N                                11 Keyboard n and N
-KC_O                                12 Keyboard o and O
-KC_P                                13 Keyboard p and P
-KC_Q                                14 Keyboard q and Q
-KC_R                                15 Keyboard r and R
-KC_S                                16 Keyboard s and S
-KC_T                                17 Keyboard t and T
-KC_U                                18 Keyboard u and U
-KC_V                                19 Keyboard v and V
-KC_W                                1A Keyboard w and W
-KC_X                                1B Keyboard x and X
-KC_Y                                1C Keyboard y and Y
-KC_Z                                1D Keyboard z and Z
-KC_1                                1E Keyboard 1 and !
-KC_2                                1F Keyboard 2 and @
-KC_3                                20 Keyboard 3 and #
-KC_4                                21 Keyboard 4 and $
-KC_5                                22 Keyboard 5 and %
-KC_6                                23 Keyboard 6 and ^
-KC_7                                24 Keyboard 7 and &
-KC_8                                25 Keyboard 8 and *
-KC_9                                26 Keyboard 9 and (
-KC_0                                27 Keyboard 0 and )
-KC_ENTER            KC_ENT          28 Keyboard Return (ENTER)
-KC_ESCAPE           KC_ESC          29 Keyboard ESCAPE
-KC_BSPACE           KC_BSPC         2A Keyboard DELETE (Backspace)
-KC_TAB                              2B Keyboard Tab
-KC_SPACE            KC_SPC          2C Keyboard Spacebar
-KC_MINUS            KC_MINS         2D Keyboard - and (underscore)
-KC_EQUAL            KC_EQL          2E Keyboard = and +
-KC_LBRACKET         KC_LBRC         2F Keyboard [ and {
-KC_RBRACKET         KC_RBRC         30 Keyboard ] and }
-KC_BSLASH           KC_BSLS         31 Keyboard \ and |
-KC_NONUS_HASH       KC_NUHS         32 Keyboard Non-US # and ~
-KC_SCOLON           KC_SCLN         33 Keyboard ; and :
-KC_QUOTE            KC_QUOT         34 Keyboard ‘ and “
-KC_GRAVE            KC_GRV          35 Keyboard Grave Accent and Tilde
-KC_COMMA            KC_COMM         36 Keyboard , and <
-KC_DOT                              37 Keyboard . and >
-KC_SLASH            KC_SLSH         38 Keyboard / and ?
-KC_CAPSLOCK         KC_CAPS         39 Keyboard Caps Lock
-KC_F1                               3A Keyboard F1
-KC_F2                               3B Keyboard F2
-KC_F3                               3C Keyboard F3
-KC_F4                               3D Keyboard F4
-KC_F5                               3E Keyboard F5
-KC_F6                               3F Keyboard F6
-KC_F7                               40 Keyboard F7
-KC_F8                               41 Keyboard F8
-KC_F9                               42 Keyboard F9
-KC_F10                              43 Keyboard F10
-KC_F11                              44 Keyboard F11
-KC_F12                              45 Keyboard F12
-KC_PSCREEN          KC_PSCR         46 Keyboard PrintScreen
-KC_SCROLLLOCK       KC_SLCK         47 Keyboard Scroll Lock
-KC_PAUSE            KC_PAUS         48 Keyboard Pause
-KC_INSERT           KC_INS          49 Keyboard Insert
-KC_HOME                             4A Keyboard Home
-KC_PGUP                             4B Keyboard PageUp
-KC_DELETE           KC_DEL          4C Keyboard Delete Forward
-KC_END                              4D Keyboard End
-KC_PGDOWN           KC_PGDN         4E Keyboard PageDown
-KC_RIGHT            KC_RGHT         4F Keyboard RightArrow
-KC_LEFT                             50 Keyboard LeftArrow
-KC_DOWN                             51 Keyboard DownArrow
-KC_UP                               52 Keyboard UpArrow
-KC_NUMLOCK          KC_NLCK         53 Keypad Num Lock and Clear
-KC_KP_SLASH         KC_PSLS         54 Keypad /
-KC_KP_ASTERISK      KC_PAST         55 Keypad *
-KC_KP_MINUS         KC_PMNS         56 Keypad -
-KC_KP_PLUS          KC_PPLS         57 Keypad +
-KC_KP_ENTER         KC_PENT         58 Keypad ENTER
-KC_KP_1             KC_P1           59 Keypad 1 and End
-KC_KP_2             KC_P2           5A Keypad 2 and Down Arrow
-KC_KP_3             KC_P3           5B Keypad 3 and PageDn
-KC_KP_4             KC_P4           5C Keypad 4 and Left Arrow
-KC_KP_5             KC_P5           5D Keypad 5
-KC_KP_6             KC_P6           5E Keypad 6 and Right Arrow
-KC_KP_7             KC_P7           5F Keypad 7 and Home
-KC_KP_8             KC_P8           60 Keypad 8 and Up Arrow
-KC_KP_9             KC_P9           61 Keypad 9 and PageUp
-KC_KP_0             KC_P0           62 Keypad 0 and Insert
-KC_KP_DOT           KC_PDOT         63 Keypad . and Delete
-KC_NONUS_BSLASH     KC_NUBS         64 Keyboard Non-US \ and |
-KC_APPLICATION      KC_APP          65 Keyboard Application
-KC_POWER                            66 Keyboard Power
-KC_KP_EQUAL         KC_PEQL         67 Keypad =
-KC_F13                              68 Keyboard F13
-KC_F14                              69 Keyboard F14
-KC_F15                              6A Keyboard F15
-KC_F16                              6B Keyboard F16
-KC_F17                              6C Keyboard F17
-KC_F18                              6D Keyboard F18
-KC_F19                              6E Keyboard F19
-KC_F20                              6F Keyboard F20
-KC_F21                              70 Keyboard F21
-KC_F22                              71 Keyboard F22
-KC_F23                              72 Keyboard F23
-KC_F24                              73 Keyboard F24
-KC_EXECUTE                          74 Keyboard Execute
-KC_HELP                             75 Keyboard Help
-KC_MENU                             76 Keyboard Menu
-KC_SELECT                           77 Keyboard Select
-KC_STOP                             78 Keyboard Stop
-KC_AGAIN                            79 Keyboard Again
-KC_UNDO                             7A Keyboard Undo
-KC_CUT                              7B Keyboard Cut
-KC_COPY                             7C Keyboard Copy
-KC_PASTE                            7D Keyboard Paste
-KC_FIND                             7E Keyboard Find
-KC__MUTE                            7F Keyboard Mute
-KC__VOLUP                           80 Keyboard Volume Up
-KC__VOLDOWN                         81 Keyboard Volume Down
-KC_LOCKING_CAPS                     82 Keyboard Locking Caps Lock
-KC_LOCKING_NUM                      83 Keyboard Locking Num Lock
-KC_LOCKING_SCROLL                   84 Keyboard Locking Scroll Lock
-KC_KP_COMMA         KC_PCMM         85 Keypad Comma
-KC_KP_EQUAL_AS400                   86 Keypad Equal Sign
-KC_INT1             KC_RO           87 Keyboard International115
-KC_INT2             KC_KANA         88 Keyboard International216
-KC_INT3             KC_JYEN         89 Keyboard International317
-KC_INT4             KC_HENK         8A Keyboard International418
-KC_INT5             KC_MHEN         8B Keyboard International519
-KC_INT6                             8C Keyboard International620
-KC_INT7                             8D Keyboard International721
-KC_INT8                             8E Keyboard International822
-KC_INT9                             8F Keyboard International922
-KC_LANG1                            90 Keyboard LANG125
-KC_LANG2                            91 Keyboard LANG226
-KC_LANG3                            92 Keyboard LANG330
-KC_LANG4                            93 Keyboard LANG431
-KC_LANG5                            94 Keyboard LANG532
-KC_LANG6                            95 Keyboard LANG68
-KC_LANG7                            96 Keyboard LANG78
-KC_LANG8                            97 Keyboard LANG88
-KC_LANG9                            98 Keyboard LANG98
-KC_ALT_ERASE                        99 Keyboard Alternate Erase
-KC_SYSREQ                           9A Keyboard SysReq/Attention
-KC_CANCEL                           9B Keyboard Cancel
-KC_CLEAR                            9C Keyboard Clear
-KC_PRIOR                            9D Keyboard Prior
-KC_RETURN                           9E Keyboard Return
-KC_SEPARATOR                        9F Keyboard Separator
-KC_OUT                              A0 Keyboard Out
-KC_OPER                             A1 Keyboard Oper
-KC_CLEAR_AGAIN                      A2 Keyboard Clear/Again
-KC_CRSEL                            A3 Keyboard CrSel/Props
-KC_EXSEL                            A4 Keyboard ExSel
-/* Modifiers */
-KC_LCTRL            KC_LCTL         E0 Keyboard LeftControl
-KC_LSHIFT           KC_LSFT         E1 Keyboard LeftShift
-KC_LALT                             E2 Keyboard LeftAlt
-KC_LGUI                             E3 Keyboard Left GUI(Windows/Apple/Meta key)
-KC_RCTRL            KC_RCTL         E4 Keyboard RightControl
-KC_RSHIFT           KC_RSFT         E5 Keyboard RightShift
-KC_RALT                             E6 Keyboard RightAlt
-KC_RGUI                             E7 Keyboard Right GUI(Windows/Apple/Meta key)
-
-/*
- * Virtual keycodes
- */
-/* System Control */
-KC_SYSTEM_POWER     KC_PWR          System Power Down
-KC_SYSTEM_SLEEP     KC_SLEP         System Sleep
-KC_SYSTEM_WAKE      KC_WAKE         System Wake
-/* Consumer Page */
-KC_AUDIO_MUTE       KC_MUTE
-KC_AUDIO_VOL_UP     KC_VOLU
-KC_AUDIO_VOL_DOWN   KC_VOLD
-KC_MEDIA_NEXT_TRACK KC_MNXT
-KC_MEDIA_PREV_TRACK KC_MPRV
-KC_MEDIA_STOP       KC_MSTP
-KC_MEDIA_PLAY_PAUSE KC_MPLY
-KC_MEDIA_SELECT     KC_MSEL
-KC_MAIL             KC_MAIL
-KC_CALCULATOR       KC_CALC
-KC_MY_COMPUTER      KC_MYCM
-KC_WWW_SEARCH       KC_WSCH
-KC_WWW_HOME         KC_WHOM
-KC_WWW_BACK         KC_WBAK
-KC_WWW_FORWARD      KC_WFWD
-KC_WWW_STOP         KC_WSTP
-KC_WWW_REFRESH      KC_WREF
-KC_WWW_FAVORITES    KC_WFAV
-KC_BRIGHTNESS_UP    KC_BRIU
-KC_BRIGHTNESS_DOWN  KC_BRID
-/* Mousekey */
-KC_MS_UP            KC_MS_U         Mouse Cursor Up
-KC_MS_DOWN          KC_MS_D         Mouse Cursor Down
-KC_MS_LEFT          KC_MS_L         Mouse Cursor Left
-KC_MS_RIGHT         KC_MS_R         Mouse Cursor Right
-KC_MS_BTN1          KC_BTN1         Mouse Button 1
-KC_MS_BTN2          KC_BTN2         Mouse Button 2
-KC_MS_BTN3          KC_BTN3         Mouse Button 3
-KC_MS_BTN4          KC_BTN4         Mouse Button 4
-KC_MS_BTN5          KC_BTN5         Mouse Button 5
-KC_MS_WH_UP         KC_WH_U         Mouse Wheel Up
-KC_MS_WH_DOWN       KC_WH_D         Mouse Wheel Down
-KC_MS_WH_LEFT       KC_WH_L         Mouse Wheel Left
-KC_MS_WH_RIGHT      KC_WH_R         Mouse Wheel Right
-KC_MS_ACCEL0        KC_ACL0         Mouse Acceleration 0
-KC_MS_ACCEL1        KC_ACL1         Mouse Acceleration 1
-KC_MS_ACCEL2        KC_ACL2         Mouse Acceleration 2
-/* Fn key */
-KC_FN0
-KC_FN1
-KC_FN2
-KC_FN3
-KC_FN4
-KC_FN5
-KC_FN6
-KC_FN7
-KC_FN8
-KC_FN9
-KC_FN10
-KC_FN11
-KC_FN12
-KC_FN13
-KC_FN14
-KC_FN15
-KC_FN16
-KC_FN17
-KC_FN18
-KC_FN19
-KC_FN20
-KC_FN21
-KC_FN22
-KC_FN23
-KC_FN24
-KC_FN25
-KC_FN26
-KC_FN27
-KC_FN28
-KC_FN29
-KC_FN30
-KC_FN31

docs/keycodes.md

@@ -6,205 +6,205 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Basic Keycodes](keycodes_basic.md)
 
-|Key                    |Aliases             |Description                                    |
-|-----------------------|--------------------|-----------------------------------------------|
-|`KC_NO`                |`XXXXXXX`           |Ignore this key (NOOP)                         |
-|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`|Use the next lowest non-transparent key        |
-|`KC_A`                 |                    |`a` and `A`                                    |
-|`KC_B`                 |                    |`b` and `B`                                    |
-|`KC_C`                 |                    |`c` and `C`                                    |
-|`KC_D`                 |                    |`d` and `D`                                    |
-|`KC_E`                 |                    |`e` and `E`                                    |
-|`KC_F`                 |                    |`f` and `F`                                    |
-|`KC_G`                 |                    |`g` and `G`                                    |
-|`KC_H`                 |                    |`h` and `H`                                    |
-|`KC_I`                 |                    |`i` and `I`                                    |
-|`KC_J`                 |                    |`j` and `J`                                    |
-|`KC_K`                 |                    |`k` and `K`                                    |
-|`KC_L`                 |                    |`l` and `L`                                    |
-|`KC_M`                 |                    |`m` and `M`                                    |
-|`KC_N`                 |                    |`n` and `N`                                    |
-|`KC_O`                 |                    |`o` and `O`                                    |
-|`KC_P`                 |                    |`p` and `P`                                    |
-|`KC_Q`                 |                    |`q` and `Q`                                    |
-|`KC_R`                 |                    |`r` and `R`                                    |
-|`KC_S`                 |                    |`s` and `S`                                    |
-|`KC_T`                 |                    |`t` and `T`                                    |
-|`KC_U`                 |                    |`u` and `U`                                    |
-|`KC_V`                 |                    |`v` and `V`                                    |
-|`KC_W`                 |                    |`w` and `W`                                    |
-|`KC_X`                 |                    |`x` and `X`                                    |
-|`KC_Y`                 |                    |`y` and `Y`                                    |
-|`KC_Z`                 |                    |`z` and `Z`                                    |
-|`KC_1`                 |                    |`1` and `!`                                    |
-|`KC_2`                 |                    |`2` and `@`                                    |
-|`KC_3`                 |                    |`3` and `#`                                    |
-|`KC_4`                 |                    |`4` and `$`                                    |
-|`KC_5`                 |                    |`5` and `%`                                    |
-|`KC_6`                 |                    |`6` and `^`                                    |
-|`KC_7`                 |                    |`7` and `&`                                    |
-|`KC_8`                 |                    |`8` and `*`                                    |
-|`KC_9`                 |                    |`9` and `(`                                    |
-|`KC_0`                 |                    |`0` and `)`                                    |
-|`KC_ENTER`             |`KC_ENT`            |Return (Enter)                                 |
-|`KC_ESCAPE`            |`KC_ESC`            |Escape                                         |
-|`KC_BSPACE`            |`KC_BSPC`           |Delete (Backspace)                             |
-|`KC_TAB`               |                    |Tab                                            |
-|`KC_SPACE`             |`KC_SPC`            |Spacebar                                       |
-|`KC_MINUS`             |`KC_MINS`           |`-` and `_`                                    |
-|`KC_EQUAL`             |`KC_EQL`            |`=` and `+`                                    |
-|`KC_LBRACKET`          |`KC_LBRC`           |`[` and `{`                                    |
-|`KC_RBRACKET`          |`KC_RBRC`           |`]` and `}`                                    |
-|`KC_BSLASH`            |`KC_BSLS`           |`\` and <code>&#124;</code>                    |
-|`KC_NONUS_HASH`        |`KC_NUHS`           |Non-US `#` and `~`                             |
-|`KC_SCOLON`            |`KC_SCLN`           |`;` and `:`                                    |
-|`KC_QUOTE`             |`KC_QUOT`           |`'` and `"`                                    |
-|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK` |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
-|`KC_COMMA`             |`KC_COMM`           |`,` and `<`                                    |
-|`KC_DOT`               |                    |`.` and `>`                                    |
-|`KC_SLASH`             |`KC_SLSH`           |`/` and `?`                                    |
-|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`|Caps Lock                                      |
-|`KC_F1`                |                    |F1                                             |
-|`KC_F2`                |                    |F2                                             |
-|`KC_F3`                |                    |F3                                             |
-|`KC_F4`                |                    |F4                                             |
-|`KC_F5`                |                    |F5                                             |
-|`KC_F6`                |                    |F6                                             |
-|`KC_F7`                |                    |F7                                             |
-|`KC_F8`                |                    |F8                                             |
-|`KC_F9`                |                    |F9                                             |
-|`KC_F10`               |                    |F10                                            |
-|`KC_F11`               |                    |F11                                            |
-|`KC_F12`               |                    |F12                                            |
-|`KC_PSCREEN`           |`KC_PSCR`           |Print Screen                                   |
-|`KC_SCROLLLOCK`        |`KC_SLCK`           |Scroll Lock                                    |
-|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK` |Pause                                          |
-|`KC_INSERT`            |`KC_INS`            |Insert                                         |
-|`KC_HOME`              |                    |Home                                           |
-|`KC_PGUP`              |                    |Page Up                                        |
-|`KC_DELETE`            |`KC_DEL`            |Forward Delete                                 |
-|`KC_END`               |                    |End                                            |
-|`KC_PGDOWN`            |`KC_PGDN`           |Page Down                                      |
-|`KC_RIGHT`             |`KC_RGHT`           |Right Arrow                                    |
-|`KC_LEFT`              |                    |Left Arrow                                     |
-|`KC_DOWN`              |                    |Down Arrow                                     |
-|`KC_UP`                |                    |Up Arrow                                       |
-|`KC_NUMLOCK`           |`KC_NLCK`           |Keypad Num Lock and Clear                      |
-|`KC_KP_SLASH`          |`KC_PSLS`           |Keypad `/`                                     |
-|`KC_KP_ASTERISK`       |`KC_PAST`           |Keypad `*`                                     |
-|`KC_KP_MINUS`          |`KC_PMNS`           |Keypad `-`                                     |
-|`KC_KP_PLUS`           |`KC_PPLS`           |Keypad `+`                                     |
-|`KC_KP_ENTER`          |`KC_PENT`           |Keypad Enter                                   |
-|`KC_KP_1`              |`KC_P1`             |Keypad `1` and End                             |
-|`KC_KP_2`              |`KC_P2`             |Keypad `2` and Down Arrow                      |
-|`KC_KP_3`              |`KC_P3`             |Keypad `3` and Page Down                       |
-|`KC_KP_4`              |`KC_P4`             |Keypad `4` and Left Arrow                      |
-|`KC_KP_5`              |`KC_P5`             |Keypad `5`                                     |
-|`KC_KP_6`              |`KC_P6`             |Keypad `6` and Right Arrow                     |
-|`KC_KP_7`              |`KC_P7`             |Keypad `7` and Home                            |
-|`KC_KP_8`              |`KC_P8`             |Keypad `8` and Up Arrow                        |
-|`KC_KP_9`              |`KC_P9`             |Keypad `9` and Page Up                         |
-|`KC_KP_0`              |`KC_P0`             |Keypad `0` and Insert                          |
-|`KC_KP_DOT`            |`KC_PDOT`           |Keypad `.` and Delete                          |
-|`KC_NONUS_BSLASH`      |`KC_NUBS`           |Non-US `\` and <code>&#124;</code>             |
-|`KC_APPLICATION`       |`KC_APP`            |Application (Windows Menu Key)                 |
-|`KC_POWER`             |                    |System Power (macOS)                           |
-|`KC_KP_EQUAL`          |`KC_PEQL`           |Keypad `=`                                     |
-|`KC_F13`               |                    |F13                                            |
-|`KC_F14`               |                    |F14                                            |
-|`KC_F15`               |                    |F15                                            |
-|`KC_F16`               |                    |F16                                            |
-|`KC_F17`               |                    |F17                                            |
-|`KC_F18`               |                    |F18                                            |
-|`KC_F19`               |                    |F19                                            |
-|`KC_F20`               |                    |F20                                            |
-|`KC_F21`               |                    |F21                                            |
-|`KC_F22`               |                    |F22                                            |
-|`KC_F23`               |                    |F23                                            |
-|`KC_F24`               |                    |F24                                            |
-|`KC_EXECUTE`           |`KC_EXEC`           |Execute                                        |
-|`KC_HELP`              |                    |Help                                           |
-|`KC_MENU`              |                    |Menu                                           |
-|`KC_SELECT`            |`KC_SLCT`           |Select                                         |
-|`KC_STOP`              |                    |Stop                                           |
-|`KC_AGAIN`             |`KC_AGIN`           |Again                                          |
-|`KC_UNDO`              |                    |Undo                                           |
-|`KC_CUT`               |                    |Cut                                            |
-|`KC_COPY`              |                    |Copy                                           |
-|`KC_PASTE`             |`KC_PSTE`           |Paste                                          |
-|`KC_FIND`              |                    |Find                                           |
-|`KC__MUTE`             |                    |Mute (macOS)                                   |
-|`KC__VOLUP`            |                    |Volume Up (macOS)                              |
-|`KC__VOLDOWN`          |                    |Volume Down (macOS)                            |
-|`KC_LOCKING_CAPS`      |`KC_LCAP`           |Locking Caps Lock                              |
-|`KC_LOCKING_NUM`       |`KC_LNUM`           |Locking Num Lock                               |
-|`KC_LOCKING_SCROLL`    |`KC_LSCR`           |Locking Scroll Lock                            |
-|`KC_KP_COMMA`          |`KC_PCMM`           |Keypad `,`                                     |
-|`KC_KP_EQUAL_AS400`    |                    |Keypad `=` on AS/400 keyboards                 |
-|`KC_INT1`              |`KC_RO`             |JIS `\` and `_`                                |
-|`KC_INT2`              |`KC_KANA`           |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`           |JIS `¥` and <code>&#124;</code>                |
-|`KC_INT4`              |`KC_HENK`           |JIS Henkan                                     |
-|`KC_INT5`              |`KC_MHEN`           |JIS Muhenkan                                   |
-|`KC_INT6`              |                    |JIS Numpad `,`                                 |
-|`KC_INT7`              |                    |International 7                                |
-|`KC_INT8`              |                    |International 8                                |
-|`KC_INT9`              |                    |International 9                                |
-|`KC_LANG1`             |`KC_HAEN`           |Hangul/English                                 |
-|`KC_LANG2`             |`KC_HANJ`           |Hanja                                          |
-|`KC_LANG3`             |                    |JIS Katakana                                   |
-|`KC_LANG4`             |                    |JIS Hiragana                                   |
-|`KC_LANG5`             |                    |JIS Zenkaku/Hankaku                            |
-|`KC_LANG6`             |                    |Language 6                                     |
-|`KC_LANG7`             |                    |Language 7                                     |
-|`KC_LANG8`             |                    |Language 8                                     |
-|`KC_LANG9`             |                    |Language 9                                     |
-|`KC_ALT_ERASE`         |`KC_ERAS`           |Alternate Erase                                |
-|`KC_SYSREQ`            |                    |SysReq/Attention                               |
-|`KC_CANCEL`            |                    |Cancel                                         |
-|`KC_CLEAR`             |`KC_CLR`            |Clear                                          |
-|`KC_PRIOR`             |                    |Prior                                          |
-|`KC_RETURN`            |                    |Return                                         |
-|`KC_SEPARATOR`         |                    |Separator                                      |
-|`KC_OUT`               |                    |Out                                            |
-|`KC_OPER`              |                    |Oper                                           |
-|`KC_CLEAR_AGAIN`       |                    |Clear/Again                                    |
-|`KC_CRSEL`             |                    |CrSel/Props                                    |
-|`KC_EXSEL`             |                    |ExSel                                          |
-|`KC_LCTRL`             |`KC_LCTL`           |Left Control                                   |
-|`KC_LSHIFT`            |`KC_LSFT`           |Left Shift                                     |
-|`KC_LALT`              |                    |Left Alt                                       |
-|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key)            |
-|`KC_RCTRL`             |`KC_RCTL`           |Right Control                                  |
-|`KC_RSHIFT`            |`KC_RSFT`           |Right Shift                                    |
-|`KC_RALT`              |                    |Right Alt                                      |
-|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)           |
-|`KC_SYSTEM_POWER`      |`KC_PWR`            |System Power Down                              |
-|`KC_SYSTEM_SLEEP`      |`KC_SLEP`           |System Sleep                                   |
-|`KC_SYSTEM_WAKE`       |`KC_WAKE`           |System Wake                                    |
-|`KC_AUDIO_MUTE`        |`KC_MUTE`           |Mute                                           |
-|`KC_AUDIO_VOL_UP`      |`KC_VOLU`           |Volume Up                                      |
-|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`           |Volume Down                                    |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`           |Next Track (Windows)                           |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`           |Previous Track (Windows)                       |
-|`KC_MEDIA_STOP`        |`KC_MSTP`           |Stop Track (Windows)                           |
-|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`           |Play/Pause Track                               |
-|`KC_MEDIA_SELECT`      |`KC_MSEL`           |Launch Media Player (Windows)                  |
-|`KC_MEDIA_EJECT`       |`KC_EJCT`           |Eject (macOS)                                  |
-|`KC_MAIL`              |                    |Launch Mail (Windows)                          |
-|`KC_CALCULATOR`        |`KC_CALC`           |Launch Calculator (Windows)                    |
-|`KC_MY_COMPUTER`       |`KC_MYCM`           |Launch My Computer (Windows)                   |
-|`KC_WWW_SEARCH`        |`KC_WSCH`           |Browser Search (Windows)                       |
-|`KC_WWW_HOME`          |`KC_WHOM`           |Browser Home (Windows)                         |
-|`KC_WWW_BACK`          |`KC_WBAK`           |Browser Back (Windows)                         |
-|`KC_WWW_FORWARD`       |`KC_WFWD`           |Browser Forward (Windows)                      |
-|`KC_WWW_STOP`          |`KC_WSTP`           |Browser Stop (Windows)                         |
-|`KC_WWW_REFRESH`       |`KC_WREF`           |Browser Refresh (Windows)                      |
-|`KC_WWW_FAVORITES`     |`KC_WFAV`           |Browser Favorites (Windows)                    |
-|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`           |Next Track (macOS)                             |
-|`KC_MEDIA_REWIND`      |`KC_MRWD`           |Previous Track (macOS)                         |
-|`KC_BRIGHTNESS_UP`     |`KC_BRIU`           |Brightness Up                                  |
-|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`           |Brightness Down                                |
+|Key                    |Aliases                       |Description                                    |
+|-----------------------|------------------------------|-----------------------------------------------|
+|`KC_NO`                |`XXXXXXX`                     |Ignore this key (NOOP)                         |
+|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`          |Use the next lowest non-transparent key        |
+|`KC_A`                 |                              |`a` and `A`                                    |
+|`KC_B`                 |                              |`b` and `B`                                    |
+|`KC_C`                 |                              |`c` and `C`                                    |
+|`KC_D`                 |                              |`d` and `D`                                    |
+|`KC_E`                 |                              |`e` and `E`                                    |
+|`KC_F`                 |                              |`f` and `F`                                    |
+|`KC_G`                 |                              |`g` and `G`                                    |
+|`KC_H`                 |                              |`h` and `H`                                    |
+|`KC_I`                 |                              |`i` and `I`                                    |
+|`KC_J`                 |                              |`j` and `J`                                    |
+|`KC_K`                 |                              |`k` and `K`                                    |
+|`KC_L`                 |                              |`l` and `L`                                    |
+|`KC_M`                 |                              |`m` and `M`                                    |
+|`KC_N`                 |                              |`n` and `N`                                    |
+|`KC_O`                 |                              |`o` and `O`                                    |
+|`KC_P`                 |                              |`p` and `P`                                    |
+|`KC_Q`                 |                              |`q` and `Q`                                    |
+|`KC_R`                 |                              |`r` and `R`                                    |
+|`KC_S`                 |                              |`s` and `S`                                    |
+|`KC_T`                 |                              |`t` and `T`                                    |
+|`KC_U`                 |                              |`u` and `U`                                    |
+|`KC_V`                 |                              |`v` and `V`                                    |
+|`KC_W`                 |                              |`w` and `W`                                    |
+|`KC_X`                 |                              |`x` and `X`                                    |
+|`KC_Y`                 |                              |`y` and `Y`                                    |
+|`KC_Z`                 |                              |`z` and `Z`                                    |
+|`KC_1`                 |                              |`1` and `!`                                    |
+|`KC_2`                 |                              |`2` and `@`                                    |
+|`KC_3`                 |                              |`3` and `#`                                    |
+|`KC_4`                 |                              |`4` and `$`                                    |
+|`KC_5`                 |                              |`5` and `%`                                    |
+|`KC_6`                 |                              |`6` and `^`                                    |
+|`KC_7`                 |                              |`7` and `&`                                    |
+|`KC_8`                 |                              |`8` and `*`                                    |
+|`KC_9`                 |                              |`9` and `(`                                    |
+|`KC_0`                 |                              |`0` and `)`                                    |
+|`KC_ENTER`             |`KC_ENT`                      |Return (Enter)                                 |
+|`KC_ESCAPE`            |`KC_ESC`                      |Escape                                         |
+|`KC_BSPACE`            |`KC_BSPC`                     |Delete (Backspace)                             |
+|`KC_TAB`               |                              |Tab                                            |
+|`KC_SPACE`             |`KC_SPC`                      |Spacebar                                       |
+|`KC_MINUS`             |`KC_MINS`                     |`-` and `_`                                    |
+|`KC_EQUAL`             |`KC_EQL`                      |`=` and `+`                                    |
+|`KC_LBRACKET`          |`KC_LBRC`                     |`[` and `{`                                    |
+|`KC_RBRACKET`          |`KC_RBRC`                     |`]` and `}`                                    |
+|`KC_BSLASH`            |`KC_BSLS`                     |`\` and <code>&#124;</code>                    |
+|`KC_NONUS_HASH`        |`KC_NUHS`                     |Non-US `#` and `~`                             |
+|`KC_SCOLON`            |`KC_SCLN`                     |`;` and `:`                                    |
+|`KC_QUOTE`             |`KC_QUOT`                     |`'` and `"`                                    |
+|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK`           |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
+|`KC_COMMA`             |`KC_COMM`                     |`,` and `<`                                    |
+|`KC_DOT`               |                              |`.` and `>`                                    |
+|`KC_SLASH`             |`KC_SLSH`                     |`/` and `?`                                    |
+|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`          |Caps Lock                                      |
+|`KC_F1`                |                              |F1                                             |
+|`KC_F2`                |                              |F2                                             |
+|`KC_F3`                |                              |F3                                             |
+|`KC_F4`                |                              |F4                                             |
+|`KC_F5`                |                              |F5                                             |
+|`KC_F6`                |                              |F6                                             |
+|`KC_F7`                |                              |F7                                             |
+|`KC_F8`                |                              |F8                                             |
+|`KC_F9`                |                              |F9                                             |
+|`KC_F10`               |                              |F10                                            |
+|`KC_F11`               |                              |F11                                            |
+|`KC_F12`               |                              |F12                                            |
+|`KC_PSCREEN`           |`KC_PSCR`                     |Print Screen                                   |
+|`KC_SCROLLLOCK`        |`KC_SLCK`, `KC_BRMD`          |Scroll Lock, Brightness Down (macOS)           |
+|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)                   |
+|`KC_INSERT`            |`KC_INS`                      |Insert                                         |
+|`KC_HOME`              |                              |Home                                           |
+|`KC_PGUP`              |                              |Page Up                                        |
+|`KC_DELETE`            |`KC_DEL`                      |Forward Delete                                 |
+|`KC_END`               |                              |End                                            |
+|`KC_PGDOWN`            |`KC_PGDN`                     |Page Down                                      |
+|`KC_RIGHT`             |`KC_RGHT`                     |Right Arrow                                    |
+|`KC_LEFT`              |                              |Left Arrow                                     |
+|`KC_DOWN`              |                              |Down Arrow                                     |
+|`KC_UP`                |                              |Up Arrow                                       |
+|`KC_NUMLOCK`           |`KC_NLCK`                     |Keypad Num Lock and Clear                      |
+|`KC_KP_SLASH`          |`KC_PSLS`                     |Keypad `/`                                     |
+|`KC_KP_ASTERISK`       |`KC_PAST`                     |Keypad `*`                                     |
+|`KC_KP_MINUS`          |`KC_PMNS`                     |Keypad `-`                                     |
+|`KC_KP_PLUS`           |`KC_PPLS`                     |Keypad `+`                                     |
+|`KC_KP_ENTER`          |`KC_PENT`                     |Keypad Enter                                   |
+|`KC_KP_1`              |`KC_P1`                       |Keypad `1` and End                             |
+|`KC_KP_2`              |`KC_P2`                       |Keypad `2` and Down Arrow                      |
+|`KC_KP_3`              |`KC_P3`                       |Keypad `3` and Page Down                       |
+|`KC_KP_4`              |`KC_P4`                       |Keypad `4` and Left Arrow                      |
+|`KC_KP_5`              |`KC_P5`                       |Keypad `5`                                     |
+|`KC_KP_6`              |`KC_P6`                       |Keypad `6` and Right Arrow                     |
+|`KC_KP_7`              |`KC_P7`                       |Keypad `7` and Home                            |
+|`KC_KP_8`              |`KC_P8`                       |Keypad `8` and Up Arrow                        |
+|`KC_KP_9`              |`KC_P9`                       |Keypad `9` and Page Up                         |
+|`KC_KP_0`              |`KC_P0`                       |Keypad `0` and Insert                          |
+|`KC_KP_DOT`            |`KC_PDOT`                     |Keypad `.` and Delete                          |
+|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and <code>&#124;</code>             |
+|`KC_APPLICATION`       |`KC_APP`                      |Application (Windows Menu Key)                 |
+|`KC_POWER`             |                              |System Power (macOS)                           |
+|`KC_KP_EQUAL`          |`KC_PEQL`                     |Keypad `=`                                     |
+|`KC_F13`               |                              |F13                                            |
+|`KC_F14`               |                              |F14                                            |
+|`KC_F15`               |                              |F15                                            |
+|`KC_F16`               |                              |F16                                            |
+|`KC_F17`               |                              |F17                                            |
+|`KC_F18`               |                              |F18                                            |
+|`KC_F19`               |                              |F19                                            |
+|`KC_F20`               |                              |F20                                            |
+|`KC_F21`               |                              |F21                                            |
+|`KC_F22`               |                              |F22                                            |
+|`KC_F23`               |                              |F23                                            |
+|`KC_F24`               |                              |F24                                            |
+|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |
+|`KC_HELP`              |                              |Help                                           |
+|`KC_MENU`              |                              |Menu                                           |
+|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |
+|`KC_STOP`              |                              |Stop                                           |
+|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |
+|`KC_UNDO`              |                              |Undo                                           |
+|`KC_CUT`               |                              |Cut                                            |
+|`KC_COPY`              |                              |Copy                                           |
+|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |
+|`KC_FIND`              |                              |Find                                           |
+|`KC__MUTE`             |                              |Mute (macOS)                                   |
+|`KC__VOLUP`            |                              |Volume Up (macOS)                              |
+|`KC__VOLDOWN`          |                              |Volume Down (macOS)                            |
+|`KC_LOCKING_CAPS`      |`KC_LCAP`                     |Locking Caps Lock                              |
+|`KC_LOCKING_NUM`       |`KC_LNUM`                     |Locking Num Lock                               |
+|`KC_LOCKING_SCROLL`    |`KC_LSCR`                     |Locking Scroll Lock                            |
+|`KC_KP_COMMA`          |`KC_PCMM`                     |Keypad `,`                                     |
+|`KC_KP_EQUAL_AS400`    |                              |Keypad `=` on AS/400 keyboards                 |
+|`KC_INT1`              |`KC_RO`                       |JIS `\` and `_`                                |
+|`KC_INT2`              |`KC_KANA`                     |JIS Katakana/Hiragana                          |
+|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and <code>&#124;</code>                |
+|`KC_INT4`              |`KC_HENK`                     |JIS Henkan                                     |
+|`KC_INT5`              |`KC_MHEN`                     |JIS Muhenkan                                   |
+|`KC_INT6`              |                              |JIS Numpad `,`                                 |
+|`KC_INT7`              |                              |International 7                                |
+|`KC_INT8`              |                              |International 8                                |
+|`KC_INT9`              |                              |International 9                                |
+|`KC_LANG1`             |`KC_HAEN`                     |Hangul/English                                 |
+|`KC_LANG2`             |`KC_HANJ`                     |Hanja                                          |
+|`KC_LANG3`             |                              |JIS Katakana                                   |
+|`KC_LANG4`             |                              |JIS Hiragana                                   |
+|`KC_LANG5`             |                              |JIS Zenkaku/Hankaku                            |
+|`KC_LANG6`             |                              |Language 6                                     |
+|`KC_LANG7`             |                              |Language 7                                     |
+|`KC_LANG8`             |                              |Language 8                                     |
+|`KC_LANG9`             |                              |Language 9                                     |
+|`KC_ALT_ERASE`         |`KC_ERAS`                     |Alternate Erase                                |
+|`KC_SYSREQ`            |                              |SysReq/Attention                               |
+|`KC_CANCEL`            |                              |Cancel                                         |
+|`KC_CLEAR`             |`KC_CLR`                      |Clear                                          |
+|`KC_PRIOR`             |                              |Prior                                          |
+|`KC_RETURN`            |                              |Return                                         |
+|`KC_SEPARATOR`         |                              |Separator                                      |
+|`KC_OUT`               |                              |Out                                            |
+|`KC_OPER`              |                              |Oper                                           |
+|`KC_CLEAR_AGAIN`       |                              |Clear/Again                                    |
+|`KC_CRSEL`             |                              |CrSel/Props                                    |
+|`KC_EXSEL`             |                              |ExSel                                          |
+|`KC_LCTRL`             |`KC_LCTL`                     |Left Control                                   |
+|`KC_LSHIFT`            |`KC_LSFT`                     |Left Shift                                     |
+|`KC_LALT`              |                              |Left Alt                                       |
+|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`          |Left GUI (Windows/Command/Meta key)            |
+|`KC_RCTRL`             |`KC_RCTL`                     |Right Control                                  |
+|`KC_RSHIFT`            |`KC_RSFT`                     |Right Shift                                    |
+|`KC_RALT`              |`KC_ALGR`                     |Right Alt (AltGr)                              |
+|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`          |Right GUI (Windows/Command/Meta key)           |
+|`KC_SYSTEM_POWER`      |`KC_PWR`                      |System Power Down                              |
+|`KC_SYSTEM_SLEEP`      |`KC_SLEP`                     |System Sleep                                   |
+|`KC_SYSTEM_WAKE`       |`KC_WAKE`                     |System Wake                                    |
+|`KC_AUDIO_MUTE`        |`KC_MUTE`                     |Mute                                           |
+|`KC_AUDIO_VOL_UP`      |`KC_VOLU`                     |Volume Up                                      |
+|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`                     |Volume Down                                    |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track (Windows)                           |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track (Windows)                       |
+|`KC_MEDIA_STOP`        |`KC_MSTP`                     |Stop Track (Windows)                           |
+|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`                     |Play/Pause Track                               |
+|`KC_MEDIA_SELECT`      |`KC_MSEL`                     |Launch Media Player (Windows)                  |
+|`KC_MEDIA_EJECT`       |`KC_EJCT`                     |Eject (macOS)                                  |
+|`KC_MAIL`              |                              |Launch Mail (Windows)                          |
+|`KC_CALCULATOR`        |`KC_CALC`                     |Launch Calculator (Windows)                    |
+|`KC_MY_COMPUTER`       |`KC_MYCM`                     |Launch My Computer (Windows)                   |
+|`KC_WWW_SEARCH`        |`KC_WSCH`                     |Browser Search (Windows)                       |
+|`KC_WWW_HOME`          |`KC_WHOM`                     |Browser Home (Windows)                         |
+|`KC_WWW_BACK`          |`KC_WBAK`                     |Browser Back (Windows)                         |
+|`KC_WWW_FORWARD`       |`KC_WFWD`                     |Browser Forward (Windows)                      |
+|`KC_WWW_STOP`          |`KC_WSTP`                     |Browser Stop (Windows)                         |
+|`KC_WWW_REFRESH`       |`KC_WREF`                     |Browser Refresh (Windows)                      |
+|`KC_WWW_FAVORITES`     |`KC_WFAV`                     |Browser Favorites (Windows)                    |
+|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`                     |Next Track (macOS)                             |
+|`KC_MEDIA_REWIND`      |`KC_MRWD`                     |Previous Track (macOS)                         |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`                     |Brightness Up                                  |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`                     |Brightness Down                                |
 
 ## [Quantum Keycodes](quantum_keycodes.md#qmk-keycodes)
 
@@ -226,9 +226,9 @@ This is a reference only. Each group of keys links to the page documenting their
 
 |Key             |Aliases  |Description                       |
 |----------------|---------|----------------------------------|
-|`AU_ON`         |         |Audio mode on                     |
-|`AU_OFF`        |         |Audio mode off                    |
-|`AU_TOG`        |         |Toggles Audio mode                |
+|`AU_ON`         |         |Turns on Audio Feature            |
+|`AU_OFF`        |         |Turns off Audio Feature           |
+|`AU_TOG`        |         |Toggles Audio state               |
 |`CLICKY_TOGGLE` |`CK_TOGG`|Toggles Audio clicky mode         |
 |`CLICKY_UP`     |`CK_UP`  |Increases frequency of the clicks |
 |`CLICKY_DOWN`   |`CK_DOWN`|Decreases frequency of the clicks |
@@ -238,8 +238,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`MU_TOG`        |         |Toggles Music Mode                |
 |`MU_MOD`        |         |Cycles through the music modes    |
 
-
-
 ## [Backlighting](feature_backlight.md)
 
 |Key      |Description                               |
@@ -285,18 +283,18 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OUT_USB` |USB only                                      |
 |`OUT_BT`  |Bluetooth only                                |
 
-
 ## [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
 
-|Key         |Description                                                               |
-|-----------------|---------------------------------------------------------------------|
-|`DF(layer)`      |Switches the default layer                                           |
-|`MO(layer)`      |Momentarily activates layer, switches off when you let go            |
-|`LM(layer, mod)` |As `MO(layer)` but with `mod` active                                 |
-|`LT(layer, kc)`  |Momentarily activates layer if held, sends kc if tapped              |
-|`TG(layer)`      |Toggles the layer (enables it if no active, and vise versa)          |
-|`TO(layer)`      |Activates layer and deactivates all other layers                     |
-|`TT(layer)`      |Momentarily activates layer if held, toggles it if tapped repeatedly |
+|Key             |Description                                                                       |
+|----------------|----------------------------------------------------------------------------------|
+|`DF(layer)`     |Set the base (default) layer                                                      |
+|`MO(layer)`     |Momentarily turn on `layer` when pressed (requires `KC_TRNS` on destination layer)|
+|`OSL(layer)`    |Momentarily activates `layer` until a key is pressed. See [One Shot Keys](https://docs.qmk.fm/#/feature_advanced_keycodes?id=one-shot-keys) for details. |
+|`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well.  Where `mod` is a mods_bit.  Mods can be viewed [here](https://docs.qmk.fm/#/feature_advanced_keycodes?id=mod-tap).  Example Implementation: `LM(LAYER_1, MOD_LALT)`|
+|`LT(layer, kc)` |Turn on `layer` when held, `kc` when tapped                                       |
+|`TG(layer)`     |Toggle `layer` on or off                                                          |
+|`TO(layer)`     |Turn on `layer` when pressed                                                      |
+|`TT(layer)`     |Normally acts like MO unless it's tapped multiple times, which toggles `layer` on |
 
 ## [Mouse Keys](feature_mouse_keys.md)
 
@@ -321,43 +319,43 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Modifiers](feature_advanced_keycodes.md#modifier-keys)
 
-|Key       |Aliases               |Description                                         |
-|----------|----------------------|----------------------------------------------------|
-|`KC_HYPR` |                      |Hold Left Control, Shift, Alt and GUI               |
-|`KC_MEH`  |                      |Hold Left Control, Shift and Alt                    |
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|                      |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|Key       |Aliases                        |Description                                         |
+|----------|-------------------------------|----------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`KC_MEH`  |                               |Left Control, Shift and Alt                         |
+|`KC_HYPR` |                               |Left Control, Shift, Alt and GUI                    |
 
 ## [Mod-Tap Keys](feature_advanced_keycodes.md#mod-tap)
 
-|Key         |Aliases                                |Description                                            |
-|------------|---------------------------------------|-------------------------------------------------------|
-|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
-|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
-|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
-|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
-|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
-|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
-|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
-|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
+|Key         |Aliases                                                          |Description                                            |
+|------------|-----------------------------------------------------------------|-------------------------------------------------------|
+|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
+|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
+|`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
+|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 
 ## [RGB Lighting](feature_rgblight.md)
 
@@ -431,18 +429,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`                |
 |`KC_QUESTION`           |`KC_QUES`          |`?`                |
 
-## [Switching and Toggling Layers](feature_advanced_keycodes.md#switching-and-toggling-layers)
-
-|Key             |Description                                                                       |
-|----------------|----------------------------------------------------------------------------------|
-|`LT(layer, kc)` |Turn on `layer` when held, `kc` when tapped                                       |
-|`TO(layer)`     |Turn on `layer` when pressed                                                      |
-|`MO(layer)`     |Momentarily turn on `layer` when pressed (requires `KC_TRNS` on destination layer)|
-|`DF(layer)`     |Set the base (default) layer                                                      |
-|`TG(layer)`     |Toggle `layer` on or off                                                          |
-|`TT(layer)`     |Normally acts like MO unless it's tapped multiple times, which toggles `layer` on |
-|`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well.                  |
-
 ## [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
 
 |Key         |Description                       |
@@ -450,7 +436,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OSM(mod)`  |Hold `mod` for one keypress       |
 |`OSL(layer)`|Switch to `layer` for one keypress|
 
-
 ## [Swap Hands](feature_swap_hands.md)
 
 |Key        |Description                                                              |
@@ -465,7 +450,7 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Unicode Support](feature_unicode.md)
 
-|Key         |Aliases|                                                 |
-|------------|-------|-------------------------------------------------|
-|`UNICODE(n)`|`UC(n)`|Send Unicode character `n`                       |
-|`X(n)`      |       |Send Unicode character `n` via a different method|
+|Key    |Description                                                                |
+|-------|---------------------------------------------------------------------------|
+|`UC(c)`|Send Unicode code point `c` (`UNICODE_ENABLE`)                             |
+|`X(i)` |Send Unicode code point at index `i` in `unicode_map` (`UNICODEMAP_ENABLE`)|

docs/keycodes_basic.md

@@ -97,14 +97,14 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Lock Keys
 
-|Key                |Aliases             |Description              |
-|-------------------|--------------------|-------------------------|
-|`KC_CAPSLOCK`      |`KC_CLCK`, `KC_CAPS`|Caps Lock                |
-|`KC_SCROLLLOCK`    |`KC_SLCK`           |Scroll Lock              |
-|`KC_NUMLOCK`       |`KC_NLCK`           |Keypad Num Lock and Clear|
-|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock        |
-|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock         |
-|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock      |
+|Key                |Aliases             |Description                         |
+|-------------------|--------------------|------------------------------------|
+|`KC_CAPSLOCK`      |`KC_CLCK`, `KC_CAPS`|Caps Lock                           |
+|`KC_SCROLLLOCK`    |`KC_SLCK`, `KC_BRMD`|Scroll Lock, Brightness Down (macOS)|
+|`KC_NUMLOCK`       |`KC_NLCK`           |Keypad Num Lock and Clear           |
+|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock                   |
+|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock                    |
+|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock                 |
 
 ## Modifiers
 
@@ -116,7 +116,7 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 |`KC_LGUI`  |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key) |
 |`KC_RCTRL` |`KC_RCTL`           |Right Control                       |
 |`KC_RSHIFT`|`KC_RSFT`           |Right Shift                         |
-|`KC_RALT`  |                    |Right Alt                           |
+|`KC_RALT`  |`KC_ALGR`           |Right Alt (AltGr)                   |
 |`KC_RGUI`  |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)|
 
 ## International
@@ -144,48 +144,48 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Commands
 
-|Key               |Aliases            |Description                   |
-|------------------|-------------------|------------------------------|
-|`KC_PSCREEN`      |`KC_PSCR`          |Print Screen                  |
-|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`|Pause                         |
-|`KC_INSERT`       |`KC_INS`           |Insert                        |
-|`KC_HOME`         |                   |Home                          |
-|`KC_PGUP`         |                   |Page Up                       |
-|`KC_DELETE`       |`KC_DEL`           |Forward Delete                |
-|`KC_END`          |                   |End                           |
-|`KC_PGDOWN`       |`KC_PGDN`          |Page Down                     |
-|`KC_RIGHT`        |`KC_RGHT`          |Right Arrow                   |
-|`KC_LEFT`         |                   |Left Arrow                    |
-|`KC_DOWN`         |                   |Down Arrow                    |
-|`KC_UP`           |                   |Up Arrow                      |
-|`KC_APPLICATION`  |`KC_APP`           |Application (Windows Menu Key)|
-|`KC_POWER`        |                   |System Power (macOS/Linux)    |
-|`KC_EXECUTE`      |`KC_EXEC`          |Execute                       |
-|`KC_HELP`         |                   |Help                          |
-|`KC_MENU`         |                   |Menu                          |
-|`KC_SELECT`       |`KC_SLCT`          |Select                        |
-|`KC_STOP`         |                   |Stop                          |
-|`KC_AGAIN`        |`KC_AGIN`          |Again                         |
-|`KC_UNDO`         |                   |Undo                          |
-|`KC_CUT`          |                   |Cut                           |
-|`KC_COPY`         |                   |Copy                          |
-|`KC_PASTE`        |`KC_PSTE`          |Paste                         |
-|`KC_FIND`         |                   |Find                          |
-|`KC__MUTE`        |                   |Mute (macOS)                  |
-|`KC__VOLUP`       |                   |Volume Up (macOS)             |
-|`KC__VOLDOWN`     |                   |Volume Down (macOS)           |
-|`KC_ALT_ERASE`    |`KC_ERAS`          |Alternate Erase               |
-|`KC_SYSREQ`       |                   |SysReq/Attention              |
-|`KC_CANCEL`       |                   |Cancel                        |
-|`KC_CLEAR`        |`KC_CLR`           |Clear                         |
-|`KC_PRIOR`        |                   |Prior                         |
-|`KC_RETURN`       |                   |Return                        |
-|`KC_SEPARATOR`    |                   |Separator                     |
-|`KC_OUT`          |                   |Out                           |
-|`KC_OPER`         |                   |Oper                          |
-|`KC_CLEAR_AGAIN`  |                   |Clear/Again                   |
-|`KC_CRSEL`        |                   |CrSel/Props                   |
-|`KC_EXSEL`        |                   |ExSel                         |
+|Key               |Aliases                       |Description                   |
+|------------------|------------------------------|------------------------------|
+|`KC_PSCREEN`      |`KC_PSCR`                     |Print Screen                  |
+|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)  |
+|`KC_INSERT`       |`KC_INS`                      |Insert                        |
+|`KC_HOME`         |                              |Home                          |
+|`KC_PGUP`         |                              |Page Up                       |
+|`KC_DELETE`       |`KC_DEL`                      |Forward Delete                |
+|`KC_END`          |                              |End                           |
+|`KC_PGDOWN`       |`KC_PGDN`                     |Page Down                     |
+|`KC_RIGHT`        |`KC_RGHT`                     |Right Arrow                   |
+|`KC_LEFT`         |                              |Left Arrow                    |
+|`KC_DOWN`         |                              |Down Arrow                    |
+|`KC_UP`           |                              |Up Arrow                      |
+|`KC_APPLICATION`  |`KC_APP`                      |Application (Windows Menu Key)|
+|`KC_POWER`        |                              |System Power (macOS/Linux)    |
+|`KC_EXECUTE`      |`KC_EXEC`                     |Execute                       |
+|`KC_HELP`         |                              |Help                          |
+|`KC_MENU`         |                              |Menu                          |
+|`KC_SELECT`       |`KC_SLCT`                     |Select                        |
+|`KC_STOP`         |                              |Stop                          |
+|`KC_AGAIN`        |`KC_AGIN`                     |Again                         |
+|`KC_UNDO`         |                              |Undo                          |
+|`KC_CUT`          |                              |Cut                           |
+|`KC_COPY`         |                              |Copy                          |
+|`KC_PASTE`        |`KC_PSTE`                     |Paste                         |
+|`KC_FIND`         |                              |Find                          |
+|`KC__MUTE`        |                              |Mute (macOS)                  |
+|`KC__VOLUP`       |                              |Volume Up (macOS)             |
+|`KC__VOLDOWN`     |                              |Volume Down (macOS)           |
+|`KC_ALT_ERASE`    |`KC_ERAS`                     |Alternate Erase               |
+|`KC_SYSREQ`       |                              |SysReq/Attention              |
+|`KC_CANCEL`       |                              |Cancel                        |
+|`KC_CLEAR`        |`KC_CLR`                      |Clear                         |
+|`KC_PRIOR`        |                              |Prior                         |
+|`KC_RETURN`       |                              |Return                        |
+|`KC_SEPARATOR`    |                              |Separator                     |
+|`KC_OUT`          |                              |Out                           |
+|`KC_OPER`         |                              |Oper                          |
+|`KC_CLEAR_AGAIN`  |                              |Clear/Again                   |
+|`KC_CRSEL`        |                              |CrSel/Props                   |
+|`KC_EXSEL`        |                              |ExSel                         |
 
 ## Media Keys
 

docs/keymap.md

@@ -1,6 +1,6 @@
 # Keymap Overview
 
-QMK keymaps are defined inside a C source file. The data structure is an array of arrays. The outer array is a list of layer arrays while the inner layer array is a list of keys. Most keyboards define a `KEYMAP()` macro to help you create this array of arrays.
+QMK keymaps are defined inside a C source file. The data structure is an array of arrays. The outer array is a list of layer arrays while the inner layer array is a list of keys. Most keyboards define a `LAYOUT()` macro to help you create this array of arrays.
 
 
 ## Keymap and Layers
@@ -119,7 +119,7 @@ The main part of this file is the `keymaps[]` definition. This is where you list
 
     const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-After this you'll find a list of KEYMAP() macros. A KEYMAP() is simply a list of keys to define a single layer. Typically you'll have one or more "base layers" (such as QWERTY, Dvorak, or Colemak) and then you'll layer on top of that one or more "function" layers. Due to the way layers are processed you can't overlay a "lower" layer on top of a "higher" layer.
+After this you'll find a list of LAYOUT() macros. A LAYOUT() is simply a list of keys to define a single layer. Typically you'll have one or more "base layers" (such as QWERTY, Dvorak, or Colemak) and then you'll layer on top of that one or more "function" layers. Due to the way layers are processed you can't overlay a "lower" layer on top of a "higher" layer.
 
 `keymaps[][MATRIX_ROWS][MATRIX_COLS]` in QMK holds the 16 bit action code (sometimes referred as the quantum keycode) in it.  For the keycode representing typical keys, its high byte is 0 and its low byte is the USB HID usage ID for keyboard.
 
@@ -131,7 +131,7 @@ Here is an example of the Clueboard's base layer:
 
       /* Keymap _BL: Base Layer (Default Layer)
        */
-    [_BL] = KEYMAP(
+    [_BL] = LAYOUT(
       F(0),    KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_GRV,  KC_BSPC,          KC_PGUP, \
       KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,                   KC_PGDN, \
       KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN,  KC_QUOT,  KC_NUHS,  KC_ENT,                             \
@@ -149,7 +149,7 @@ Some interesting things to note about this:
 
 Our function layer is, from a code point of view, no different from the base layer. Conceptually, however, you will build that layer as an overlay, not a replacement. For many people this distinction does not matter, but as you build more complicated layering setups it matters more and more.
 
-    [_FL] = KEYMAP(
+    [_FL] = LAYOUT(
       KC_GRV,  KC_F1,   KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,   KC_F11,   KC_F12,   _______, KC_DEL,           BL_STEP, \
       _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS,  _______,  _______,  _______,                   _______, \
       _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,                           \
@@ -161,62 +161,6 @@ Some interesting things to note:
 * We have used our `_______` definition to turn `KC_TRNS` into `_______`. This makes it easier to spot the keys that have changed on this layer.
 * While in this layer if you press one of the `_______` keys it will activate the key in the next lowest active layer.
 
-### Custom Functions
-
-At the bottom of the file we've defined a single custom function. This function defines a key that sends `KC_ESC` when pressed without modifiers and `KC_GRAVE` when modifiers are held. There are a couple pieces that need to be in place for this to work, and we will go over both of them.
-
-#### `fn_actions[]`
-
-We define the `fn_actions[]` array to point to custom functions. `F(N)` in a keymap will call element N of that array. For the Clueboard's that looks like this:
-
-    const uint16_t PROGMEM fn_actions[] = {
-      [0] = ACTION_FUNCTION(0),  // Calls action_function()
-    };
-
-In this case we've instructed QMK to call the `ACTION_FUNCTION` callback, which we will define in the next section.
-
-> This `fn_actions[]` interface is mostly for backward compatibility.  In QMK, you don't need to use `fn_actions[]`.  You can directly use `ACTION_FUNCTION(N)` or any other action code value itself normally generated by the macro in `keymaps[][MATRIX_ROWS][MATRIX_COLS]`.  N in `F(N)` can only be 0 to 31.  Use of the action code directly in `keymaps` unlocks this limitation.
-
-You can get a full list of Action Functions in [action_code.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action_code.h). 
-
-#### `action_function()`
-
-To actually handle the keypress event we define an `action_function()`. This function will be called when the key is pressed, and then again when the key is released. We have to handle both situations within our code, as well as determining whether to send/release `KC_ESC` or `KC_GRAVE`.
-
-    void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-      static uint8_t mods_pressed;
-
-      switch (id) {
-        case 0:
-          /* Handle the combined Grave/Esc key
-           */
-          mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
-
-          if (record->event.pressed) {
-            /* The key is being pressed.
-             */
-            if (mods_pressed) {
-              add_key(KC_GRV);
-              send_keyboard_report();
-            } else {
-              add_key(KC_ESC);
-              send_keyboard_report();
-            }
-          } else {
-            /* The key is being released.
-             */
-            if (mods_pressed) {
-              del_key(KC_GRV);
-              send_keyboard_report();
-            } else {
-              del_key(KC_ESC);
-              send_keyboard_report();
-            }
-          }
-          break;
-      }
-    }
-
 # Nitty Gritty Details
 
 This should have given you a basic overview for creating your own keymap. For more details see the following resources:

docs/newbs.md

@@ -6,13 +6,18 @@ Not sure if your keyboard can run QMK? If it's a mechanical keyboard you built y
 
 ## Overview
 
-There are 5 main sections to this guide:
+There are 7 main sections to this guide:
 
 * [Getting Started](newbs_getting_started.md)
-* [Building Your First Firmware](newbs_building_firmware.md)
+* [Building Your First Firmware using the command line](newbs_building_firmware.md)
+* [Building Your First Firmware using the online GUI](newbs_building_firmware_configurator.md)
 * [Flashing Firmware](newbs_flashing.md)
 * [Testing and Debugging](newbs_testing_debugging.md)
-* [Best Practices](newbs_best_practices.md)
+* [Git Best Practices](newbs_best_practices.md)
 * [Learn More with these Resources](newbs_learn_more_resources.md)
 
 This guide is focused on helping someone who has never compiled software before. It makes choices and recommendations based on that viewpoint. There are alternative methods for many of these procedures, and we support most of those alternatives. If you have any doubt about how to accomplish a task you can [ask us for guidance](getting_started_getting_help.md).
+
+## Additional Resources
+
+* [Thomas Baart's QMK Basics Blog](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – A user-created blog covering the basics of how to use QMK Firmware, as seen from a new user's perspective.

docs/newbs_building_firmware_configurator.md

@@ -0,0 +1,105 @@
+# QMK Configurator
+
+The [QMK Configurator](https://config.qmk.fm) is an online graphical user interface that generates QMK Firmware hex files.  
+
+?> **Please follow these steps in order.**
+
+Watch the [Video Tutorial](https://youtu.be/7RH-1pAbjvw)
+
+The QMK Configurator works best with Chrome/Firefox. 
+
+
+!> **Files from other tools such as KLE, or kbfirmware will not be compatible with QMK Configurator. Do not load them, do not import them. QMK Configurator is a DIFFERENT tool. **
+
+## Selecting your keyboard
+
+Click the drop down box and select the keyboard you want to create a keymap for. 
+
+?> If your keyboard has several versions, make sure you select the correct one.** 
+
+I'll say that again because it's important
+
+!> **MAKE SURE YOU SELECT THE RIGHT VERSION!**
+
+If your keyboard has been advertised to be powered by QMK but is not in the list, chances are a developer hasn't gotten to it yet or we haven't had a chance to merge it in yet. File an issue at [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) requesting to support that particular keyboard, if there is no active [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) for it. There are also QMK powered keyboards that are in their manufacturer's own github accounts. Double check for that as well. 
+
+## Selecting your keyboard layout
+
+Choose the layout that best represents the keymap you want to create. Some keyboards do not have enough layouts or correct layouts defined yet. They will be supported in the future. 
+
+## Keymap Name
+
+Call this keymap what you want. 
+
+?> If you are running into issues when compiling, it may be worth changing this name, as it may already exist in the QMK  Firmware repo.
+
+## Creating Your Keymap
+
+Keycode Entry is accomplished in 3 ways.  
+1. Drag and dropping 
+2. Clicking on an empty spot on the layout and clicking the keycode you desire
+3. Clicking on an empty spot on the layout, pressing the physical key on your keyboard. 
+
+Hover your mouse over a key and a short blurb will tell you what that keycode does. For a more verbose description please see    
+
+[Basic Keycode Reference](https://docs.qmk.fm/#/keycodes_basic)    
+[Advanced Keycode Reference](https://docs.qmk.fm/#/feature_advanced_keycodes)    
+
+In the event that you can't find a layout that supports your keymap, for example three spots for spacebar, or two spots for backspace, or 2 spots for shift etc etc, Fill them ALL up. 
+
+### Example:
+
+3 spots for spacebar: Fill them ALL with spacebar
+
+2 spots for backspace: Fill them BOTH with backspace
+
+2 spots for right shift: Fill them BOTH with right shift
+
+1 spot for left shift and 1 spot for iso support: Fill them both with left shift
+
+5 spots, but only 4 keys: Guess and check or ask someone who has done it before. 
+
+## Saving Your Keymap for Future Edits
+
+When you're satisfied with your keymap or just want to work on it later, press the `Export Keymap` button. It will save your keymap as the name you chose above appended with .json. 
+
+You can then load this .json file in the future by pressing the `Import Keymap` button. 
+
+!> **CAUTION:** This is not the same type of .json file used for kbfirmware.com or any other tool. If you try to use this for those tools, or the .json from those tools with QMK Configurator, there is a chance your keyboard will **explode**. 
+
+## Generating your firmware file
+
+Press the green `Compile` button.
+
+When the compilation is done, you will be able to press the green `Download Firmware` button. 
+
+## Flashing Your Keyboard
+
+Please refer to [Flashing Firmware](newbs_flashing.md)
+
+## Troubleshooting
+
+#### My .json file is not working
+
+If the .json file was generated with QMK Configurator, congratulations you have stumbled upon a bug. File an issue at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)
+
+If not....how did you miss my big bold message at the top saying not to use other .json files? 
+
+#### There are extra spaces in my layout? What do I do? 
+
+If you're referring to having three spots for space bar, the best course of action is to just fill them all with space bar. The same can be done for backspace and shifts
+
+#### What is the keycode for.......
+
+Please see
+
+[Basic Keycode Reference](https://docs.qmk.fm/#/keycodes_basic)    
+[Advanced Keycode Reference](https://docs.qmk.fm/#/feature_advanced_keycodes)    
+
+#### It won't compile
+
+Please double check the other layers of your keymap to make sure there are no random keys present. 
+
+## Problems and Bugs
+
+We are always accepting customer requests and bug reports. Please file them at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)

docs/newbs_flashing.md

@@ -86,7 +86,7 @@ If you know what bootloader that you're using, then when compiling the firmware,
 
 ### DFU
 
-For the DFU bootloader, when you're ready to compile and flash your firmware, open up your terminal window and run the built command: 
+For the DFU bootloader, when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
     make <my_keyboard>:<my_keymap>:dfu
 
@@ -131,9 +131,19 @@ If you have any issues with this, you may need to this:
 
     sudo make <my_keyboard>:<my_keymap>:dfu
 
+#### DFU commands
+
+There are a number of DFU commands that you can use to flash firmware to a DFU device:
+
+* `:dfu` - This is the normal option and waits until a DFU device is available, and then flashes the firmware. This will check every 5 seconds, to see if a DFU device has appeared.
+* `:dfu-ee` - This flashes an `eep` file instead of the normal hex.  This is uncommon. 
+* `:dfu-split-left` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
+* `:dfu-split-right` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
+
+
 ### Caterina 
 
-For Arduino boards and their close (such as the SparkFun ProMicro), when you're ready to compile and flash your firmware, open up your terminal window and run the built command: 
+For Arduino boards and their clones (such as the SparkFun ProMicro), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
     make <my_keyboard>:<my_keymap>:avrdude
 
@@ -199,9 +209,17 @@ If you have any issues with this, you may need to this:
 
     sudo make <my_keyboard>:<my_keymap>:avrdude
 
+
+Additionally, if you want to flash multiple boards, use the following command:
+
+    make <keyboard>:<keymap>:avrdude-loop
+
+When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
+
+
 ## HalfKay
 
-For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the built command: 
+For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
     make <my_keyboard>:<my_keymap>:teensy
 
@@ -226,12 +244,61 @@ Waiting for Teensy device...
 
  ```
  Found HalfKay Bootloader
-Read "./.build/ergodox_ez_drashna.hex": 28532 bytes, 88.5% usage
+Read "./.build/ergodox_ez_xyverz.hex": 28532 bytes, 88.5% usage
 Programming............................................................................................................................................................................
 ...................................................
 Booting
 ```
 
+## STM32 (ARM)
+
+For a majority of ARM boards (including the Proton C, Planck Rev 6, and Preonic Rev 3), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
+
+    make <my_keyboard>:<my_keymap>:dfu-util
+
+For example, if your keymap is named "xyverz" and you're building a keymap for the Planck Revision 6 keyboard, you'll use this command and then reboot the keyboard to the bootloader (before it finishes compiling):
+
+    make planck/rev6:xyverz:dfu-util
+
+Once the firmware finishes compiling, it will output something like this: 
+
+```
+Linking: .build/planck_rev6_xyverz.elf                                                             [OK]
+Creating binary load file for flashing: .build/planck_rev6_xyverz.bin                               [OK]
+Creating load file for flashing: .build/planck_rev6_xyverz.hex                                     [OK]
+
+Size after:
+   text    data     bss     dec     hex filename
+      0   41820       0   41820    a35c .build/planck_rev6_xyverz.hex
+
+Copying planck_rev6_xyverz.bin to qmk_firmware folder                                              [OK]
+dfu-util 0.9
+
+Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
+Copyright 2010-2016 Tormod Volden and Stefan Schmidt
+This program is Free Software and has ABSOLUTELY NO WARRANTY
+Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
+
+Invalid DFU suffix signature
+A valid DFU suffix will be required in a future dfu-util release!!!
+Opening DFU capable USB device...
+ID 0483:df11
+Run-time device DFU version 011a
+Claiming USB DFU Interface...
+Setting Alternate Setting #0 ...
+Determining device status: state = dfuERROR, status = 10
+dfuERROR, clearing status
+Determining device status: state = dfuIDLE, status = 0
+dfuIDLE, continuing
+DFU mode device DFU version 011a
+Device returned transfer size 2048
+DfuSe interface name: "Internal Flash  "
+Downloading to address = 0x08000000, size = 41824
+Download        [=========================] 100%        41824 bytes
+Download done.
+File downloaded successfully
+Transitioning to dfuMANIFEST state
+```
 
 ## Test It Out!
 

docs/newbs_getting_started.md

@@ -6,7 +6,10 @@ QMK tries to put a lot of power into your hands by making easy things easy, and
 
 # Getting Started
 
-Before you can build keymaps, you need to install some software and set up your build environment. This only has to be done once no matter how many keyboards you plan to compile firmware for.
+Before you can build keymaps, you need to install some software and set up your build environment. This only has to be done once no matter how many keyboards you plan to compile firmware for. 
+
+If you would prefer a more graphical user interface approach, please consider using the online [QMK Configurator](https://config.qmk.fm). Please refer to [Building Your First Firmware using the online GUI](newbs_building_firmware_configurator.md). 
+
 
 ## Download Software
 
@@ -63,8 +66,10 @@ You will need to install Git. It's very likely that you already have it, but if
 
 Once you have set up your Linux/Unix environment, you are ready to download QMK. We will do this by using Git to "clone" the QMK repository. Open a Terminal or MSYS2 MinGW window and leave it open for the remainder of this guide. Inside that window run these two commands:
 
-    git clone https://github.com/qmk/qmk_firmware.git
-    cd qmk_firmware
+```shell
+git clone --recurse-submodules https://github.com/qmk/qmk_firmware.git
+cd qmk_firmware
+```
 
 ?> If you already know [how to use GitHub](getting_started_github.md), we recommend that you create and clone your own fork instead. If you don't know what that means, you can safely ignore this message.
 

docs/newbs_testing_debugging.md

@@ -15,7 +15,17 @@ Note: These programs are not provided by or endorsed by QMK.
 
 ## Debugging With QMK Toolbox
 
-[QMK Toolbox](https://github.com/qmk/qmk_toolbox) will show messages from your keyboard if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, or use the [Command](feature_command.md) feature to enable debug mode.
+[QMK Toolbox](https://github.com/qmk/qmk_toolbox) will show messages from your keyboard if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
+
+```c
+void keyboard_post_init_user(void) {
+  // Customise these values to desired behaviour
+  debug_enable=true;
+  debug_matrix=true;
+  //debug_keyboard=true;
+  //debug_mouse=true;
+}
+```
 
 <!-- FIXME: Describe the debugging messages here. -->
 

docs/other_vscode.md

@@ -0,0 +1,117 @@
+# Setting up Visual Studio Code for QMK Development
+
+[Visual Studio Code](https://code.visualstudio.com/) (VS Code) is an open-source code editor that supports many different programming languages. 
+
+Using a full-featured editor such as VS Code provides many advantages over a plain text editor, such as:
+* intelligent code completion
+* convenient navigation in the code
+* refactoring tools
+* build automation (no need for the command-line)
+* a graphical front end for GIT
+* many other tools such as debugging, code formatting, showing call hierarchies etc.
+
+The purpose of this page is to document how to set up VS Code for developing QMK Firmware.
+
+This guide covers how to configure everything needed on Windows and Ubuntu 18.04
+
+# Set up VS Code
+Before starting, you will want to make sure that you have all of the build tools set up, and QMK Firmware cloned. Head to the the [Newbs Getting Started Guide](newbs_getting_started.md) to get things set up, if you haven't already.
+
+## Windows
+
+### Prerequisites
+
+* [Git for Windows](https://git-scm.com/download/win) (This link will prompt to save/run the installer)
+  
+  1. Disable all of the options but `Git LFS (Large File Support)` and `Check daily for Git for Windows updates`. 
+  2. Set the default editor to `Use Visual Studio Code as Git's default editor`
+  3. Select the `Use Git from Git Bash only` option, since that's the option that you should use here.
+  4. For the `Choosing HTTPS transport backend`, either option should be fine.
+  5. Select the `Checkout as-is, commit Unix-style line endings` option. QMK Firmware uses Unix style commits.
+  6. For the extra options, leave the default options as is. 
+
+  This software is needed for Git support in VS Code. It may be possible to not include this, but it is much simpler to just use this. 
+
+* [Git Credential Manager for Windows](https://github.com/Microsoft/Git-Credential-Manager-for-Windows/releases) (Optional) 
+
+  This software provides better support for Git by providing secure storage for git credentials, MFA and personal access token generation. 
+  
+  This isn't strictly needed, but we would recommend it. 
+
+
+### Installing VS Code
+
+1. Head to [VS Code](https://code.visualstudio.com/) and download the installer
+2. Run the installer
+
+This part is super simple.  However, there is some configuration that we need to do to ensure things are configured correctly.
+
+### Configuring VS Code
+
+First, we need to set up IntelliSense. This isn't strictly required, but it will make your life a LOT easier. To do this, we need to create the `.vscode/c_cpp_properies.json` file in the QMK Firmware folder, You can do this all manually, but I've done most of the work already. 
+
+Grab [this file](https://gist.github.com/drashna/48e2c49ce877be592a1650f91f8473e8) and save it.  You may need to edit this file, if you didn't install MSYS2 to the default location, or are using WSL/LxSS.  
+
+Once you have saved this file, you will need to reload VS Code, if it was already running. 
+
+?> You should see an `extensions.json` and `settings.json` file in the `.vscode` folder, as well.
+
+
+Now, we will set up the MSYS2 window to show up in VSCode as the integrated terminal.  This has a number of advantages. Mostly, you can control+click on errors and jump to those files.  This makes debugging much easier.  It's also nice, in that you don't have to jump to another window. 
+
+1. Click <kbd><kbd>File</kbd> > <kbd>Preferences ></kbd> > <kbd>Settings</kbd> </kbd>
+2. Click on the <kbd>{}</kbd> button, in the top right to open the `settings.json` file. 
+3. Set the file's content to: 
+
+   ```json
+   {
+        "terminal.integrated.shell.windows": "C:\\msys64\\usr\\bin\\bash.exe",
+        "terminal.integrated.env.windows": {
+            "MSYSTEM": "MINGW64",
+            "CHERE_INVOKING": "1"
+        },
+        "terminal.integrated.shellArgs.windows": [
+            "--login"
+        ],
+        "terminal.integrated.cursorStyle": "line"
+    }
+    ```
+
+   If there are settings here already, then just add everything between the first and last curly brackets.  
+
+?> If you installed MSYS2 to a different folder, then you'll need to change the path for `terminal.integrated.shell.windows` to the correct path for your system. 
+
+4. Hit Ctrl-` (grave) to bring up the terminal.  
+
+   This should start the terminal in the workspace's folder (so the `qmk_firmware` folder), and then you can compile your keyboard. 
+
+
+## Every other Operating System
+
+1. Head to [VS Code](https://code.visualstudio.com/) and download the installer
+2. Run the installer
+3. That's it
+
+No, really, that's it.  The paths needed are already included when installing the packages, and it is much better about detecting the current workspace files and parsing them for IntelliSense. 
+
+## Plugins
+
+There are a number of extensions that you may want to install:
+
+* [Git Extension Pack](https://marketplace.visualstudio.com/items?itemName=donjayamanne.git-extension-pack) - 
+This installs a bunch of Git related tools that may make using Git with QMK Firmware easier.
+* [EditorConfig for VS Code](https://marketplace.visualstudio.com/items?itemName=EditorConfig.EditorConfig) - _[Optional]_ -  Helps to keep the code to the QMK Coding Conventions.
+* [Bracket Pair Colorizer 2](https://marketplace.visualstudio.com/items?itemName=CoenraadS.bracket-pair-colorizer-2) - _[Optional]_ - This color codes the brackets in your code, to make it easier to reference nested code.
+* [Github Markdown Preview](https://marketplace.visualstudio.com/items?itemName=bierner.github-markdown-preview) - _[Optional]_ - Makes the markdown preview in VS Code more like GitHub's.
+* [VS Live Share Extension Pack](https://marketplace.visualstudio.com/items?itemName=MS-vsliveshare.vsliveshare-pack) - _[Optional]_ - This extension allows somebody else to access your workspace (or you to access somebody else's workspace) and help out.  This is great if you're having issues and need some help from somebody.
+* [VIM Keymap](https://marketplace.visualstudio.com/items?itemName=GiuseppeCesarano.vim-keymap) - _[Optional]_ - For those that prefer VIM style keybindings. There are other options for this, too. 
+* [Travis CI Status](https://marketplace.visualstudio.com/items?itemName=felixrieseberg.vsc-travis-ci-status) - _[Optional]_ - This shows the current Travis CI status, if you have it set up.
+
+Restart once you've installed any extensions
+
+# Configure VS Code for QMK
+1. Click <kbd><kbd>File</kbd> > <kbd>Open Folder</kbd></kbd>
+2. Open the QMK Firmware folder that you cloned from GitHub. 
+3. Click <kbd><kbd>File</kbd> > <kbd>Save Workspace As...</kbd></kbd>
+
+And now you're ready to code QMK Firmware in VS Code

docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md

@@ -22,6 +22,8 @@ The `MATRIX_ROW_PINS` and `MATRIX_COL_PINS` are the pins your MCU uses on each r
 
 For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the diodes in the `COL2ROW` position, but it's possible that they are in the other - people coming from EasyAVR often use `ROW2COL`. Nothing will function if this is incorrect.
 
+To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.
+
 `BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported.
 
 `BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap.
@@ -54,10 +56,10 @@ This is where all of the custom logic for your keyboard goes - you may not need
 
 ## `/keyboards/<keyboard>/<keyboard>.h`
 
-Here is where you can (optionally) define your `KEYMAP` function to remap your matrix into a more readable format. With ortholinear boards, this isn't always necessary, but it can help to accommodate the dead spots on your matrix, where there are keys that take up more than one space (2u, staggering, 6.25u, etc). The example shows the difference between the physical keys, and the matrix design:
+Here is where you can (optionally) define your `LAYOUT` function to remap your matrix into a more readable format. With ortholinear boards, this isn't always necessary, but it can help to accommodate the dead spots on your matrix, where there are keys that take up more than one space (2u, staggering, 6.25u, etc). The example shows the difference between the physical keys, and the matrix design:
 
 ```
-#define KEYMAP( \
+#define LAYOUT( \
     k00, k01, k02, \
       k10,  k11   \
 ) \

docs/proton_c_conversion.md

@@ -0,0 +1,21 @@
+# Converting a board to use the Proton C
+
+If a board currently supported in QMK uses a Pro Micro (or compatible board) and you want to use the Proton C, you can generate the firmware by appending `CONVERT_TO_PROTON_C=yes` (or `CTPC=yes`) to your make argument, like this:
+
+    make 40percentclub/mf68:default CTPC=yes
+
+You can add the same argument to your keymap's `rules.mk`, which will accomplish the same thing.
+
+This exposes the `CONVERT_TO_PROTON_C` flag that you can use in your code with `#ifdef`s, like this:
+
+    #ifdef CONVERT_TO_PROTON_C
+        // Proton C code
+    #else
+        // Pro Micro code
+    #endif
+
+Before being able to compile, you may get some errors about `PORTB/DDRB`, etc not being defined, so you'll need to convert the keyboard's code to use the [GPIO Controls](internals_gpio_control.md) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all.
+
+The Proton C only has one on-board LED (C13), and by default, the TXLED (D5) is mapped to it. If you want the RXLED (B0) mapped to it instead, add this like to your `config.h`:
+
+    #define CONVERT_TO_PROTON_C_RXLED

docs/reference_info_json.md

@@ -0,0 +1,73 @@
+# `info.json`
+
+This file is used by the [QMK API](https://github.com/qmk/qmk_api). It contains the information [QMK Configurator](https://config.qmk.fm/) needs to display a representation of your keyboard. You can also set metadata here.
+
+You can create `info.json` files at every level under `qmk_firmware/keyboards/<name>` to specify this metadata. These files are combined, with more specific files overriding keys in less specific files. This means you do not need to duplicate your metadata information. For example, `qmk_firmware/keyboards/clueboard/info.json` specifies `manufacturer` and `maintainer`, while `qmk_firmware/keyboards/clueboard/66/info.json` specifies more specific information about Clueboard 66%.
+
+## `info.json` Format
+
+The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
+
+* `keyboard_name`
+  * A free-form text string describing the keyboard.
+  * Example: `Clueboard 66%`
+* `url`
+  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
+* `maintainer`
+  * GitHub username of the maintainer, or `qmk` for community maintained boards
+* `width`
+  * Width of the board in Key Units
+* `height`
+  * Height of the board in Key Units
+* `layouts`
+  * Physical Layout representations. See the next section for more detail.
+
+### Layout Format
+
+Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
+
+* `width`
+  * Optional: The width of the layout in Key Units
+* `height`
+  * Optional: The height of the layout in Key Units
+* `key_count`
+  * **Required**: The number of keys in this layout
+* `layout`
+  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
+
+### Key Dictionary Format
+
+Each Key Dictionary in a layout describes the physical properties of a key. If you are familiar with the Raw Code for <http://keyboard-layout-editor.com> you will find many of the concepts the same. We re-use the same key names and layout choices wherever possible, but unlike keyboard-layout-editor each key is stateless, inheriting no properties from the keys that came before it.
+
+All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
+
+* `x`
+  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
+* `y`
+  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
+* `w`
+  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+* `h`
+  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+* `r`
+  * How many degrees clockwise to rotate the key.
+* `rx`
+  * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x`
+* `ry`
+  * The absolute position of the point to rotate the key around in the vertical axis. Default: `y`
+* `ks`
+  * Key Shape: define a polygon by providing a list of points, in Key Units.
+  * **Important**: These are relative to the top-left of the key, not absolute.
+  * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]`
+* `label`
+  * What to name this position in the matrix.
+  * This should usually be the same name as what is silkscreened on the PCB at this location.
+
+## How is the Metadata Exposed?
+
+This metadata is primarily used in two ways:
+
+* To allow web-based configurators to dynamically generate UI
+* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter.
+
+Configurator authors can see the [QMK Compiler](https://docs.api.qmk.fm/using-the-api) docs for more information on using the JSON API.

docs/support.md

@@ -0,0 +1,43 @@
+# Support
+
+If you need help with something, the best place to get quick support is going to be on our [Discord Server](https://discord.gg/Uq7gcHh).  There is usually somebody online, and there are a bunch of very helpful people there.
+
+Don't forget to read our [Code of Conduct](https://qmk.fm/coc/).
+
+## Help! I don't know where to start! 
+
+If this is the case, then you should start with our [Newbs Guide](https://docs.qmk.fm/#/newbs). There is a lot of great info there, and that should cover everything you need to get started.
+
+If that's an issue, hop onto the [QMK Configurator](https://config.qmk.fm), as that will handle a majority of what you need there. 
+
+## Help! I'm having issues flashing!
+
+First, head to the [Compiling/Flashing FAQ Page](https://docs.qmk.fm/#/faq_build). There is a good deal of info there, and you'll find a bunch of solutions to common issues there. 
+
+## Help, I have an issue that isn't covered by the links above
+
+Okay, that's fine. Then please check the [open issues in our GitHub](https://github.com/qmk/qmk_firmware/issues) to see if somebody is experiencing the same thing (make sure it's not just similar, but actually the same).  
+
+If you can't find anything, then please open a [new issue](https://github.com/qmk/qmk_firmware/issues/new)!
+
+## What if I found a bug? 
+
+Then please open an [issue](https://github.com/qmk/qmk_firmware/issues/new), and if you know how to fix it, open up a Pull Request on GitHub with the fix.
+
+## But `git` and `GitHub` are intimidating! 
+
+Don't worry, we have some pretty nice [Guidelines](https://docs.qmk.fm/#/newbs_best_practices) on how to start using `git` and GitHub to make things easier to develop. 
+
+Additionally, you can find additional `git` and GitHub related links [here](https://docs.qmk.fm/#/newbs_learn_more_resources).
+
+## I have a Keyboard that I want to add support for
+
+Awesome! Open up a Pull Request for it. We'll review the code, and merge it!  
+
+### What if I want to do brand it with `QMK`? 
+
+That's amazing! We would love to assist you with that! 
+
+In fact, we have a [whole page](https://qmk.fm/powered/) dedicated to adding QMK Branding to your page and keyboard. This covers pretty much everything you need (knowledge and images) to officially support QMK.
+
+If you have any questions about this, open an issue or head to [Discord](https://discord.gg/Uq7gcHh). 

docs/understanding_qmk.md

@@ -12,7 +12,7 @@ You can think of QMK as no different from any other computer program. It is star
 
 The reason for this is the different platforms that QMK supports. The most common platform is `lufa`, which runs on AVR processors such at the atmega32u4. We also support `chibios` and `vusb`.
 
-We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1019). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1060). This is [The Main Loop](#the-main-loop).
+We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1028). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1069). This is [The Main Loop](#the-main-loop).
 
 ## The Main Loop
 
@@ -22,7 +22,7 @@ This section of code is called "The Main Loop" because it's responsible for loop
     keyboard_task();
 ```
 
-This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/common/keyboard.c#L206), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
+This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
 
 Within `keyboard_task()` you'll find code to handle:
 
@@ -57,10 +57,10 @@ Matrix Scanning runs many times per second. The exact rate varies but typically
 
 Once we know the state of every switch on our keyboard we have to map that to a keycode. In QMK this is done by making use of C macros to allow us to separate the definition of the physical layout from the definition of keycodes.
 
-At the keyboard level we define a C macro (typically named `KEYMAP()`) which maps our keyboard's matrix to physical keys. Sometimes the matrix does not have a switch in every location, and we can use this macro to pre-populate those with KC_NO, making the keymap definition easier to work with. Here's an example `KEYMAP()` macro for a numpad:
+At the keyboard level we define a C macro (typically named `LAYOUT()`) which maps our keyboard's matrix to physical keys. Sometimes the matrix does not have a switch in every location, and we can use this macro to pre-populate those with KC_NO, making the keymap definition easier to work with. Here's an example `LAYOUT()` macro for a numpad:
 
 ```c
-#define KEYMAP( \
+#define LAYOUT( \
     k00, k01, k02, k03, \
     k10, k11, k12, k13, \
     k20, k21, k22, \
@@ -75,17 +75,17 @@ At the keyboard level we define a C macro (typically named `KEYMAP()`) which map
 }
 ```
 
-Notice how the second block of our `KEYMAP()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
+Notice how the second block of our `LAYOUT()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
 
-You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
+You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
 
 ##### Keycode Assignment
 
-At the keymap level we make use of our `KEYMAP()` macro above to map keycodes to physical locations to matrix locations. It looks like this:
+At the keymap level we make use of our `LAYOUT()` macro above to map keycodes to physical locations to matrix locations. It looks like this:
 
 ```
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP(
+[0] = LAYOUT(
   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
   KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
   KC_P4,   KC_P5,   KC_P6, \
@@ -94,7 +94,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 }
 ```
 
-Notice how all of these arguments match up with the first half of the `KEYMAP()` macro from the last section? This is how we take a keycode and map it to our Matrix Scan from earlier.
+Notice how all of these arguments match up with the first half of the `LAYOUT()` macro from the last section? This is how we take a keycode and map it to our Matrix Scan from earlier.
 
 ##### State Change Detection
 
@@ -130,31 +130,35 @@ Comparing against our keymap we can see that the pressed key is KC_NLCK. From he
 
 ##### Process Record
 
-The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions.  Depending on options set in rule.mk or elsewhere, only a subset of the functions below will be included in final firmware.
+The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions. Depending on options set in `rules.mk` or elsewhere, only a subset of the functions below will be included in final firmware.
 
-* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/tmk_core/common/action.c#L172)
-  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L193)
-    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L213)
-    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_tap_dance.c#L115)
-    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_key_lock.c#L62)
-    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_clicky.c#L44)
-    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/card.c#L20)
-      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
-    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/fdd0f915271f79b104aa5d216566bcc3fd134e85/quantum/rgb_matrix.c#L139)
-    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_midi.c#L81)
-    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_audio.c#L19)
-    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_steno.c#L160)
-    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_music.c#L114)
-    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_tap_dance.c#L136)
-    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_leader.c#L38)
-    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_combo.c#L115)
-    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicode.c#L22)
-    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_ucis.c#L91)
-    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_printer.c#L77)
-    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_auto_shift.c#L94)
-    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicodemap.c#L47)
-    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_terminal.c#L264)
-    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/quantum.c#L287)
+* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172)
+  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206)
+    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226)
+    * [`void velocikey_accelerate(void)`](https://github.com/qmk/qmk_firmware/blob/c1c5922aae7b60b7c7d13d3769350eed9dda17ab/quantum/velocikey.c#L27)
+    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119)
+    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62)
+    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79)
+    * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216)
+    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20)
+      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
+    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139)
+    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81)
+    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19)
+    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160)
+    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114)
+    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141)
+    * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169)
+      calls one of:
+        * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20)
+        * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46)
+        * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95)
+    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51)
+    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115)
+    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77)
+    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94)
+    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264)
+    * [Identify and process Quantum-specific keycodes](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291)
 
 At any step during this chain of events a function (such as `process_record_kb()`) can `return false` to halt all further processing.
 

drivers/arm/i2c_master.c

@@ -45,16 +45,14 @@ static const I2CConfig i2cconfig = {
 __attribute__ ((weak))
 void i2c_init(void)
 {
-  //palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT);
-
   // Try releasing special pins for a short time
-  palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT);
 
   chThdSleepMilliseconds(10);
- 
-  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
-  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+
+  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }
@@ -103,8 +101,7 @@ uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t l
   return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
 }
 
-// This is usually not needed. It releases the driver to allow pins to become GPIO again.
-uint8_t i2c_stop(uint16_t timeout)
+uint8_t i2c_stop(void)
 {
   i2cStop(&I2C_DRIVER);
   return 0;

drivers/arm/i2c_master.h

@@ -26,6 +26,16 @@
 #include "ch.h"
 #include <hal.h>
 
+#ifndef I2C1_BANK
+    #define I2C1_BANK GPIOB
+#endif
+#ifndef I2C1_SCL
+    #define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+    #define I2C1_SDA 7
+#endif
+
 #ifndef I2C_DRIVER
   #define I2C_DRIVER I2CD1
 #endif
@@ -37,4 +47,4 @@ uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t ti
 uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-uint8_t i2c_stop(uint16_t timeout);
+uint8_t i2c_stop(void);

drivers/avr/apa102.c

@@ -0,0 +1,101 @@
+/*
+* APA102 lib V1.0a
+*
+* Controls APA102 RGB-LEDs
+* Author: Mikkel (Duckle29 on github)
+*
+* Dec 22th, 2017  v1.0a Initial Version
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "apa102.h"
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "debug.h"
+
+// Setleds for standard RGB
+void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds){
+  apa102_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF));
+}
+
+void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK){
+  pinMode(RGB_DI_PIN, PinDirectionOutput);
+  pinMode(RGB_CLK_PIN, PinDirectionOutput);
+
+  apa102_send_array((uint8_t*)ledarray,leds)
+}
+
+void apa102_send_array(uint8_t *data, uint16_t leds){ // Data is struct of 3 bytes. RGB - leds is number of leds in data
+  apa102_start_frame();
+  while(leds--){
+    apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r);
+    data++;
+  }
+  apa102_end_frame(leds);
+}
+
+void apa102_send_frame(uint32_t frame){
+  for(uint32_t i=0xFF; i>0;){
+    apa102_send_byte(frame & i);
+    i = i << 8;
+  }
+}
+
+void apa102_start_frame(){
+  apa102_send_frame(0);
+}
+
+void apa102_end_frame(uint16_t leds)
+{
+  // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h
+  // and adapted. The code is MIT licensed. I think thats compatible?
+
+  // We need to send some more bytes to ensure that all the LEDs in the
+  // chain see their new color and start displaying it.
+  //
+  // The data stream seen by the last LED in the chain will be delayed by
+  // (count - 1) clock edges, because each LED before it inverts the clock
+  // line and delays the data by one clock edge.  Therefore, to make sure
+  // the last LED actually receives the data we wrote, the number of extra
+  // edges we send at the end of the frame must be at least (count - 1).
+  // For the APA102C, that is sufficient.
+  //
+  // The SK9822 only updates after it sees 32 zero bits followed by one more
+  // rising edge.  To avoid having the update time depend on the color of
+  // the last LED, we send a dummy 0xFF byte.  (Unfortunately, this means
+  // that partial updates of the beginning of an LED strip are not possible;
+  // the LED after the last one you are trying to update will be black.)
+  // After that, to ensure that the last LED in the chain sees 32 zero bits
+  // and a rising edge, we need to send at least 65 + (count - 1) edges.  It
+  // is sufficent and simpler to just send (5 + count/16) bytes of zeros.
+  //
+  // We are ignoring the specification for the end frame in the APA102/SK9822
+  // datasheets because it does not actually ensure that all the LEDs will
+  // start displaying their new colors right away.
+
+  apa102_send_byte(0xFF);
+  for (uint16_t i = 0; i < 5 + leds / 16; i++){
+    apa102_send_byte(0);
+  }
+}
+
+void apa102_send_byte(uint8_t byte){
+  uint8_t i;
+  for (i = 0; i < 8; i++){
+    digitalWrite(RGB_DI_PIN, !!(byte & (1 << (7-i)));
+    digitalWrite(RGB_CLK_PIN, PinLevelHigh);
+  }
+}

drivers/avr/apa102.h

@@ -0,0 +1,46 @@
+/*
+ * light weight WS2812 lib include
+ *
+ * Version 2.3  - Nev 29th 2015
+ * Author: Tim (cpldcpu@gmail.com)
+ *
+ * Please do not change this file! All configuration is handled in "ws2812_config.h"
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+
+#include "rgblight_types.h"
+
+
+/* User Interface
+ *
+ * Input:
+ *         ledarray:           An array of GRB data describing the LED colors
+ *         number_of_leds:     The number of LEDs to write
+ *         pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
+ *
+ * The functions will perform the following actions:
+ *         - Set the data-out pin as output
+ *         - Send out the LED data
+ *         - Wait 50<35>s to reset the LEDs
+ */
+
+void apa102_setleds     (LED_TYPE *ledarray, uint16_t number_of_leds);
+void apa102_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
+void apa102_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);

drivers/avr/i2c_master.c

@@ -7,43 +7,56 @@
 
 #include "i2c_master.h"
 #include "timer.h"
+#include "wait.h"
 
 #ifndef F_SCL
-#define F_SCL 400000UL // SCL frequency
+#  define F_SCL 400000UL  // SCL frequency
 #endif
 #define Prescaler 1
-#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
+#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16) / 2)
 
-void i2c_init(void)
-{
-  TWSR = 0;     /* no prescaler */
+void i2c_init(void) {
+  TWSR = 0; /* no prescaler */
   TWBR = (uint8_t)TWBR_val;
+
+  #ifdef __AVR_ATmega32A__
+  // set pull-up resistors on I2C bus pins
+  PORTC |= 0b11;
+
+  // enable TWI (two-wire interface)
+  TWCR |= (1 << TWEN);
+
+  // enable TWI interrupt and slave address ACK
+  TWCR |= (1 << TWIE);
+  TWCR |= (1 << TWEA);
+  #endif
 }
 
-i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
-{
+i2c_status_t i2c_start(uint8_t address, uint16_t timeout) {
   // reset TWI control register
   TWCR = 0;
   // transmit START condition
-  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+  TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
 
   uint16_t timeout_timer = timer_read();
-  while( !(TWCR & (1<<TWINT)) ) {
+  while (!(TWCR & (1 << TWINT))) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
   }
 
   // check if the start condition was successfully transmitted
-  if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return I2C_STATUS_ERROR; }
+  if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) {
+    return I2C_STATUS_ERROR;
+  }
 
   // load slave address into data register
   TWDR = address;
   // start transmission of address
-  TWCR = (1<<TWINT) | (1<<TWEN);
+  TWCR = (1 << TWINT) | (1 << TWEN);
 
   timeout_timer = timer_read();
-  while( !(TWCR & (1<<TWINT)) ) {
+  while (!(TWCR & (1 << TWINT))) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
@@ -51,38 +64,39 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
 
   // check if the device has acknowledged the READ / WRITE mode
   uint8_t twst = TW_STATUS & 0xF8;
-  if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return I2C_STATUS_ERROR;
+  if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+    return I2C_STATUS_ERROR;
+  }
 
   return I2C_STATUS_SUCCESS;
 }
 
-i2c_status_t i2c_write(uint8_t data, uint16_t timeout)
-{
+i2c_status_t i2c_write(uint8_t data, uint16_t timeout) {
   // load data into data register
   TWDR = data;
   // start transmission of data
-  TWCR = (1<<TWINT) | (1<<TWEN);
+  TWCR = (1 << TWINT) | (1 << TWEN);
 
   uint16_t timeout_timer = timer_read();
-  while( !(TWCR & (1<<TWINT)) ) {
+  while (!(TWCR & (1 << TWINT))) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
   }
 
-  if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return I2C_STATUS_ERROR; }
+  if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) {
+    return I2C_STATUS_ERROR;
+  }
 
   return I2C_STATUS_SUCCESS;
 }
 
-int16_t i2c_read_ack(uint16_t timeout)
-{
-
+int16_t i2c_read_ack(uint16_t timeout) {
   // start TWI module and acknowledge data after reception
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
+  TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
 
   uint16_t timeout_timer = timer_read();
-  while( !(TWCR & (1<<TWINT)) ) {
+  while (!(TWCR & (1 << TWINT))) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
@@ -92,14 +106,12 @@ int16_t i2c_read_ack(uint16_t timeout)
   return TWDR;
 }
 
-int16_t i2c_read_nack(uint16_t timeout)
-{
-
+int16_t i2c_read_nack(uint16_t timeout) {
   // start receiving without acknowledging reception
-  TWCR = (1<<TWINT) | (1<<TWEN);
+  TWCR = (1 << TWINT) | (1 << TWEN);
 
   uint16_t timeout_timer = timer_read();
-  while( !(TWCR & (1<<TWINT)) ) {
+  while (!(TWCR & (1 << TWINT))) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
@@ -109,112 +121,89 @@ int16_t i2c_read_nack(uint16_t timeout)
   return TWDR;
 }
 
-i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
-{
+i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
   i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
-  if (status) return status;
 
-  for (uint16_t i = 0; i < length; i++) {
+  for (uint16_t i = 0; i < length && status >= 0; i++) {
     status = i2c_write(data[i], timeout);
-    if (status) return status;
   }
 
-  status = i2c_stop(timeout);
-  if (status) return status;
+  i2c_stop();
 
-  return I2C_STATUS_SUCCESS;
+  return status;
 }
 
-i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
-{
+i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
   i2c_status_t status = i2c_start(address | I2C_READ, timeout);
-  if (status) return status;
 
-  for (uint16_t i = 0; i < (length-1); i++) {
+  for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
     status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
-    } else {
-      return status;
     }
   }
 
-  status = i2c_read_nack(timeout);
-  if (status >= 0 ) {
-    data[(length-1)] = status;
-  } else {
-    return status;
+  if (status >= 0) {
+    status = i2c_read_nack(timeout);
+    if (status >= 0) {
+      data[(length - 1)] = status;
+    }
   }
 
-  status = i2c_stop(timeout);
-  if (status) return status;
+  i2c_stop();
 
-  return I2C_STATUS_SUCCESS;
+  return (status < 0) ? status : I2C_STATUS_SUCCESS;
 }
 
-i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
-{
+i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
   i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
-  if (status) return status;
+  if (status >= 0) {
+    status = i2c_write(regaddr, timeout);
 
-  status = i2c_write(regaddr, timeout);
-  if (status) return status;
-
-  for (uint16_t i = 0; i < length; i++) {
-    status = i2c_write(data[i], timeout);
-    if (status) return status;
+    for (uint16_t i = 0; i < length && status >= 0; i++) {
+      status = i2c_write(data[i], timeout);
+    }
   }
 
-  status = i2c_stop(timeout);
-  if (status) return status;
+  i2c_stop();
 
-  return I2C_STATUS_SUCCESS;
+  return status;
 }
 
-i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
-{
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
   i2c_status_t status = i2c_start(devaddr, timeout);
-  if (status) return status;
+  if (status < 0) {
+    goto error;
+  }
 
   status = i2c_write(regaddr, timeout);
-  if (status) return status;
+  if (status < 0) {
+    goto error;
+  }
 
   status = i2c_start(devaddr | 0x01, timeout);
-  if (status) return status;
 
-  for (uint16_t i = 0; i < (length-1); i++) {
+  for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
     status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
-    } else {
-      return status;
     }
   }
 
-  status = i2c_read_nack(timeout);
-  if (status >= 0 ) {
-    data[(length-1)] = status;
-  } else {
-    return status;
+  if (status >= 0) {
+    status = i2c_read_nack(timeout);
+    if (status >= 0) {
+      data[(length - 1)] = status;
+    }
   }
 
-  status = i2c_stop(timeout);
-  if (status) return status;
+error:
+  i2c_stop();
 
-  return I2C_STATUS_SUCCESS;
+  return (status < 0) ? status : I2C_STATUS_SUCCESS;
 }
 
-i2c_status_t i2c_stop(uint16_t timeout)
-{
+void i2c_stop(void) {
   // transmit STOP condition
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t timeout_timer = timer_read();
-  while(TWCR & (1<<TWSTO)) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
-    }
-  }
-
-  return I2C_STATUS_SUCCESS;
-}
+  TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
+}

drivers/avr/i2c_master.h

@@ -26,6 +26,6 @@ i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint1
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_stop(uint16_t timeout);
+void i2c_stop(void);
 
 #endif // I2C_MASTER_H

drivers/avr/i2c_slave.c

@@ -9,23 +9,26 @@
 
 #include "i2c_slave.h"
 
-void i2c_init(uint8_t address){
+volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
+
+static volatile uint8_t buffer_address;
+static volatile bool slave_has_register_set = false;
+
+void i2c_slave_init(uint8_t address){
     // load address into TWI address register
-    TWAR = (address << 1);
+    TWAR = address;
     // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
     TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }
 
-void i2c_stop(void){
+void i2c_slave_stop(void){
     // clear acknowledge and enable bits
     TWCR &= ~((1 << TWEA) | (1 << TWEN));
 }
 
 ISR(TWI_vect){
     uint8_t ack = 1;
-    // temporary stores the received data
-    //uint8_t data;
-    
+
     switch(TW_STATUS){
         case TW_SR_SLA_ACK:
             // The device is now a slave receiver
@@ -38,13 +41,13 @@ ISR(TWI_vect){
             if(!slave_has_register_set){
                 buffer_address = TWDR;
 
-                if (buffer_address >= RX_BUFFER_SIZE){ // address out of bounds dont ack
-                    ack = 0;
-                    buffer_address = 0;
+                if (buffer_address >= I2C_SLAVE_REG_COUNT) {  // address out of bounds dont ack
+                  ack            = 0;
+                  buffer_address = 0;
                 }
                 slave_has_register_set = true; // address has been receaved now fill in buffer
             } else {
-                rxbuffer[buffer_address] = TWDR;
+                i2c_slave_reg[buffer_address] = TWDR;
                 buffer_address++;
             }
             break;
@@ -52,7 +55,7 @@ ISR(TWI_vect){
         case TW_ST_SLA_ACK:
         case TW_ST_DATA_ACK:
             // This device is a slave transmitter and master has requested data
-            TWDR = txbuffer[buffer_address];
+            TWDR = i2c_slave_reg[buffer_address];
             buffer_address++;
             break;
 
@@ -63,6 +66,6 @@ ISR(TWI_vect){
             break;
     }
 
-    // Reset i2c state mahcine to be ready for next interrupt
+    // Reset i2c state machine to be ready for next interrupt
     TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN);
 }

drivers/avr/i2c_slave.h

@@ -8,16 +8,11 @@
 #ifndef I2C_SLAVE_H
 #define I2C_SLAVE_H
 
-#define TX_BUFFER_SIZE 30
-#define RX_BUFFER_SIZE 30
+#define I2C_SLAVE_REG_COUNT 30
 
-volatile uint8_t buffer_address;
-static volatile bool slave_has_register_set = false;
-volatile uint8_t txbuffer[TX_BUFFER_SIZE];
-volatile uint8_t rxbuffer[RX_BUFFER_SIZE];
+extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
 
-void i2c_init(uint8_t address);
-void i2c_stop(void);
-ISR(TWI_vect);
+void i2c_slave_init(uint8_t address);
+void i2c_slave_stop(void);
 
 #endif // I2C_SLAVE_H

drivers/avr/ws2812.c

@@ -128,11 +128,11 @@ unsigned char I2C_Write(unsigned char c)
         c <<= 1;
     }
 
-    
+
     I2C_WriteBit(0);
     _delay_us(I2C_DELAY);
     _delay_us(I2C_DELAY);
-  
+
     // _delay_us(I2C_DELAY);
     //return I2C_ReadBit();
     return 0;

drivers/boards/GENERIC_STM32_F303XC/board.h

@@ -18,14 +18,14 @@
 #define _BOARD_H_
 
 /*
- * Setup for Clueboard 60% Keyboard
+ * Setup for Generic STM32_F303 Board
  */
 
 /*
  * Board identifier.
  */
 #define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME                  "Planck PCB"
+#define BOARD_NAME                  "STM32_F303"
 
 /*
  * Board oscillators-related settings.

drivers/haptic/DRV2605L.c

@@ -21,7 +21,7 @@
 #include <math.h>
 
 
-uint8_t DRV2605L_transfer_buffer[20];
+uint8_t DRV2605L_transfer_buffer[2];
 uint8_t DRV2605L_tx_register[0];
 uint8_t DRV2605L_read_buffer[0];
 uint8_t DRV2605L_read_register;
@@ -34,6 +34,11 @@ void DRV_write(uint8_t drv_register, uint8_t settings) {
 }
 
 uint8_t DRV_read(uint8_t regaddress) {
+#ifdef __AVR__
+  i2c_readReg(DRV2605L_BASE_ADDRESS << 1,
+    regaddress, DRV2605L_read_buffer, 1, 100);
+  DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+#else
   DRV2605L_tx_register[0] = regaddress;
   if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1,
     DRV2605L_tx_register, 1,
@@ -42,14 +47,13 @@ uint8_t DRV_read(uint8_t regaddress) {
     printf("err reading reg \n");
   }
   DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+#endif
 return DRV2605L_read_register;
 }
 
 void DRV_init(void)
 {
   i2c_init();
-  i2c_start(DRV2605L_BASE_ADDRESS);
-
   /* 0x07 sets DRV2605 into calibration mode */
   DRV_write(DRV_MODE,0x07); 
 
@@ -104,21 +108,17 @@ void DRV_init(void)
     C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME;
     DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte);
   DRV_write(DRV_LIB_SELECTION,LIB_SELECTION);
-  //start autocalibration
+
   DRV_write(DRV_GO, 0x01);
 
   /* 0x00 sets DRV2605 out of standby and to use internal trigger
    * 0x01 sets DRV2605 out of standby and to use external trigger */
   DRV_write(DRV_MODE,0x00); 
-  
-  /* 0x06: LRA library */
-  DRV_write(DRV_WAVEFORM_SEQ_1, 0x01);
-
-  /* 0xB9: LRA, 4x brake factor, medium gain, 7.5x back EMF
-   * 0x39: ERM, 4x brake factor, medium gain, 1.365x back EMF */
-  
-  /* TODO: setup auto-calibration as part of initiation */
 
+//Play greeting sequence
+  DRV_write(DRV_GO, 0x00);
+  DRV_write(DRV_WAVEFORM_SEQ_1, DRV_GREETING);
+  DRV_write(DRV_GO, 0x01);
 }
 
 void DRV_pulse(uint8_t sequence)

drivers/haptic/DRV2605L.h

@@ -31,13 +31,6 @@
 #define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
 #endif
 
-#ifndef RATED_VOLTAGE
-#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
-#ifndef V_PEAK
-#define V_PEAK 2.8
-#endif
-#endif
-
 /* LRA specific settings */
 #if FB_ERM_LRA == 1
 #ifndef V_RMS
@@ -49,6 +42,16 @@
 #ifndef F_LRA
 #define F_LRA 205
 #endif
+#ifndef RATED_VOLTAGE
+#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#endif
+#endif
+
+#ifndef RATED_VOLTAGE
+#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#endif
+#ifndef V_PEAK
+#define V_PEAK 2.8
 #endif
 
 /* Library Selection */
@@ -60,6 +63,13 @@
 #endif
 #endif
 
+#ifndef DRV_GREETING
+#define DRV_GREETING alert_750ms
+#endif
+#ifndef DRV_MODE_DEFAULT
+#define DRV_MODE_DEFAULT strong_click1
+#endif
+
 /* Control 1 register settings */
 #ifndef DRIVE_TIME
 #define DRIVE_TIME 25
@@ -162,7 +172,6 @@ void DRV_write(const uint8_t drv_register, const uint8_t settings);
 uint8_t DRV_read(const uint8_t regaddress);
 void DRV_pulse(const uint8_t sequence);
 
-
 typedef enum DRV_EFFECT{
   clear_sequence      = 0,
   strong_click 		    = 1,
@@ -288,6 +297,7 @@ typedef enum DRV_EFFECT{
   smooth_hum3_30 = 121,
   smooth_hum4_20 = 122,
   smooth_hum5_10 = 123,
+  drv_effect_max = 124,
 } DRV_EFFECT;
 
 /* Register bit array unions */

drivers/haptic/haptic.c

@@ -0,0 +1,248 @@
+/* Copyright 2019 ishtob
+ * Driver for haptic feedback written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "haptic.h"
+#include "eeconfig.h"
+#include "progmem.h"
+#include "debug.h"
+#ifdef DRV2605L
+#include "DRV2605L.h"
+#endif
+#ifdef SOLENOID_ENABLE
+#include "solenoid.h"
+#endif
+
+haptic_config_t haptic_config;
+
+void haptic_init(void) {
+  debug_enable = 1; //Debug is ON!
+  if (!eeconfig_is_enabled()) {
+  	eeconfig_init();
+  }
+  haptic_config.raw = eeconfig_read_haptic();
+  if (haptic_config.mode < 1){
+  haptic_config.mode = 1;
+  }
+  if (!haptic_config.mode){
+  dprintf("No haptic config found in eeprom, setting default configs\n");
+  haptic_reset();
+  }
+  #ifdef SOLENOID_ENABLE
+    solenoid_setup();
+    dprintf("Solenoid driver initialized\n");
+  #endif
+  #ifdef DRV2605L
+    DRV_init();
+    dprintf("DRV2605 driver initialized\n");
+  #endif
+  eeconfig_debug_haptic();
+}
+
+void haptic_task(void) {
+  #ifdef SOLENOID_ENABLE
+  solenoid_check();
+  #endif
+}
+
+void eeconfig_debug_haptic(void) {
+  dprintf("haptic_config eprom\n");
+  dprintf("haptic_config.enable = %d\n", haptic_config.enable);
+  dprintf("haptic_config.mode = %d\n", haptic_config.mode);
+}
+
+void haptic_enable(void) {
+  haptic_config.enable = 1;
+  xprintf("haptic_config.enable = %u\n", haptic_config.enable);
+  eeconfig_update_haptic(haptic_config.raw);
+}
+
+void haptic_disable(void) {
+  haptic_config.enable = 0;
+  xprintf("haptic_config.enable = %u\n", haptic_config.enable);
+  eeconfig_update_haptic(haptic_config.raw);
+}
+
+void haptic_toggle(void) {
+if (haptic_config.enable) {
+  haptic_disable();
+  } else {
+  haptic_enable();
+  }
+  eeconfig_update_haptic(haptic_config.raw);
+}
+
+void haptic_feedback_toggle(void){
+ haptic_config.feedback++;
+  if (haptic_config.feedback >= HAPTIC_FEEDBACK_MAX)
+  haptic_config.feedback = KEY_PRESS;
+  xprintf("haptic_config.feedback = %u\n", !haptic_config.feedback);
+  eeconfig_update_haptic(haptic_config.raw);
+}
+
+void haptic_buzz_toggle(void) {
+  bool buzz_stat = !haptic_config.buzz;
+  haptic_config.buzz = buzz_stat;
+  haptic_set_buzz(buzz_stat);
+}
+
+void haptic_mode_increase(void) {
+  uint8_t mode = haptic_config.mode + 1;
+  #ifdef DRV2605L
+  if (haptic_config.mode >= drv_effect_max) {
+    mode = 1;
+  }
+  #endif
+    haptic_set_mode(mode);
+}
+
+void haptic_mode_decrease(void) {
+  uint8_t mode = haptic_config.mode -1;
+  #ifdef DRV2605L
+  if (haptic_config.mode < 1) {
+    mode = (drv_effect_max - 1);
+  }
+  #endif
+  haptic_set_mode(mode);
+}
+
+void haptic_dwell_increase(void) {
+  uint8_t dwell = haptic_config.dwell + 1;
+  #ifdef SOLENOID_ENABLE
+  if (haptic_config.dwell >= SOLENOID_MAX_DWELL) {
+    dwell = 1;
+  }
+  solenoid_set_dwell(dwell);
+  #endif
+  haptic_set_dwell(dwell);
+}
+
+void haptic_dwell_decrease(void) {
+  uint8_t dwell = haptic_config.dwell -1;
+  #ifdef SOLENOID_ENABLE
+  if (haptic_config.dwell < SOLENOID_MIN_DWELL) {
+    dwell = SOLENOID_MAX_DWELL;
+  }
+  solenoid_set_dwell(dwell);
+  #endif
+  haptic_set_dwell(dwell);
+}
+
+void haptic_reset(void){
+  haptic_config.enable = true;
+  uint8_t feedback = HAPTIC_FEEDBACK_DEFAULT;
+  haptic_config.feedback = feedback;
+  #ifdef DRV2605L
+    uint8_t mode = HAPTIC_MODE_DEFAULT;
+    haptic_config.mode = mode;
+  #endif
+  #ifdef SOLENOID_ENABLE
+    uint8_t dwell = SOLENOID_DEFAULT_DWELL;
+    haptic_config.dwell = dwell;
+  #endif
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
+  xprintf("haptic_config.mode = %u\n", haptic_config.mode);
+}
+
+void haptic_set_feedback(uint8_t feedback) {
+  haptic_config.feedback = feedback;
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
+}
+
+void haptic_set_mode(uint8_t mode) {
+  haptic_config.mode = mode;
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.mode = %u\n", haptic_config.mode);
+}
+
+void haptic_set_buzz(uint8_t buzz) {
+  haptic_config.buzz = buzz;
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.buzz = %u\n", haptic_config.buzz);
+}
+
+void haptic_set_dwell(uint8_t dwell) {
+  haptic_config.dwell = dwell;
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.dwell = %u\n", haptic_config.dwell);
+}
+
+uint8_t haptic_get_mode(void) {
+  if (!haptic_config.enable){
+    return false;
+  }
+  return haptic_config.mode;
+}
+
+uint8_t haptic_get_feedback(void) {
+  if (!haptic_config.enable){
+    return false;
+  }
+  return haptic_config.feedback;
+}
+
+uint8_t haptic_get_dwell(void) {
+  if (!haptic_config.enable){
+    return false;
+  }
+  return haptic_config.dwell;
+}
+
+void haptic_play(void) {
+  #ifdef DRV2605L
+  uint8_t play_eff = 0;
+  play_eff = haptic_config.mode;
+  DRV_pulse(play_eff);
+  #endif
+  #ifdef SOLENOID_ENABLE
+  solenoid_fire();
+  #endif
+}
+
+bool process_haptic(uint16_t keycode, keyrecord_t *record) {
+    if (keycode == HPT_ON && record->event.pressed) { haptic_enable(); }
+    if (keycode == HPT_OFF && record->event.pressed) { haptic_disable(); }
+    if (keycode == HPT_TOG && record->event.pressed) { haptic_toggle(); }
+    if (keycode == HPT_RST && record->event.pressed) { haptic_reset(); }
+    if (keycode == HPT_FBK && record->event.pressed) { haptic_feedback_toggle(); }
+    if (keycode == HPT_BUZ && record->event.pressed) { haptic_buzz_toggle(); }
+    if (keycode == HPT_MODI && record->event.pressed) { haptic_mode_increase(); }
+    if (keycode == HPT_MODD && record->event.pressed) { haptic_mode_decrease(); }
+    if (keycode == HPT_DWLI && record->event.pressed) { haptic_dwell_increase(); }
+    if (keycode == HPT_DWLD && record->event.pressed) { haptic_dwell_decrease(); }
+  if (haptic_config.enable) {
+    if ( record->event.pressed ) {
+	// keypress
+      if (haptic_config.feedback < 2) {
+      haptic_play();
+      }
+    } else {
+    //keyrelease
+      if (haptic_config.feedback > 0) {
+      haptic_play();
+      } 
+    }
+  }
+  return true;
+}
+
+void haptic_shutdown(void) {
+  #ifdef SOLENOID_ENABLE
+  solenoid_shutdown();
+  #endif
+
+}

drivers/haptic/haptic.h

@@ -0,0 +1,82 @@
+/* Copyright 2019 ishtob
+ * Driver for haptic feedback written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include <stdint.h>
+#include <stdbool.h>
+#include "quantum.h"
+#ifdef DRV2605L
+#include "DRV2605L.h"
+#endif
+
+
+#ifndef HAPTIC_FEEDBACK_DEFAULT
+#define HAPTIC_FEEDBACK_DEFAULT 0
+#endif
+#ifndef HAPTIC_MODE_DEFAULT
+#define HAPTIC_MODE_DEFAULT DRV_MODE_DEFAULT
+#endif
+
+/* EEPROM config settings */
+typedef union {
+  uint32_t raw;
+  struct {
+    bool     enable    :1;
+    uint8_t  feedback  :2;
+    uint8_t  mode      :7;
+    bool     buzz      :1;
+    uint8_t  dwell     :7;
+    uint16_t reserved  :16; 
+  };
+} haptic_config_t;
+
+typedef enum HAPTIC_FEEDBACK{
+  KEY_PRESS,
+  KEY_PRESS_RELEASE,
+  KEY_RELEASE,
+  HAPTIC_FEEDBACK_MAX,
+} HAPTIC_FEEDBACK;
+
+bool process_haptic(uint16_t keycode, keyrecord_t *record);
+void haptic_init(void);
+void haptic_task(void);
+void eeconfig_debug_haptic(void);
+void haptic_enable(void);
+void haptic_disable(void);
+void haptic_toggle(void);
+void haptic_feedback_toggle(void);
+void haptic_mode_increase(void);
+void haptic_mode_decrease(void);
+void haptic_mode(uint8_t mode);
+void haptic_reset(void);
+void haptic_set_feedback(uint8_t feedback);
+void haptic_set_mode(uint8_t mode);
+void haptic_set_dwell(uint8_t dwell);
+void haptic_set_buzz(uint8_t buzz);
+void haptic_buzz_toggle(void);
+uint8_t haptic_get_mode(void);
+uint8_t haptic_get_feedback(void);
+void haptic_dwell_increase(void);
+void haptic_dwell_decrease(void);
+
+void haptic_play(void);
+void haptic_shutdown(void);
+
+
+
+
+

drivers/haptic/solenoid.c

@@ -0,0 +1,109 @@
+/* Copyright 2018 mtdjr - modified by ishtob
+ * Driver for solenoid written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <timer.h>
+#include "solenoid.h"
+#include "haptic.h"
+
+bool solenoid_on = false;
+bool solenoid_buzzing = false;
+uint16_t solenoid_start = 0;
+uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL;
+
+extern haptic_config_t haptic_config;
+
+
+void solenoid_buzz_on(void) {
+  haptic_set_buzz(1);
+}
+
+void solenoid_buzz_off(void) {
+  haptic_set_buzz(0);
+}
+
+void solenoid_set_buzz(int buzz) {
+  haptic_set_buzz(buzz);
+}
+
+
+void solenoid_dwell_minus(uint8_t solenoid_dwell) {
+  if (solenoid_dwell > 0) solenoid_dwell--;
+}
+
+void solenoid_dwell_plus(uint8_t solenoid_dwell) {
+  if (solenoid_dwell < SOLENOID_MAX_DWELL) solenoid_dwell++;
+}
+
+void solenoid_set_dwell(uint8_t dwell) {
+  solenoid_dwell = dwell;
+}
+
+void solenoid_stop(void) {
+  writePinLow(SOLENOID_PIN);
+  solenoid_on = false;
+  solenoid_buzzing = false;
+}
+
+void solenoid_fire(void) {
+  if (!haptic_config.buzz && solenoid_on) return;
+  if (haptic_config.buzz && solenoid_buzzing) return;
+
+  solenoid_on = true;
+  solenoid_buzzing = true;
+  solenoid_start = timer_read();
+  writePinHigh(SOLENOID_PIN);
+}
+
+void solenoid_check(void) {
+  uint16_t elapsed = 0;
+
+  if (!solenoid_on) return;
+
+  elapsed = timer_elapsed(solenoid_start);
+
+  //Check if it's time to finish this solenoid click cycle
+  if (elapsed > solenoid_dwell) {
+    solenoid_stop();
+    return;
+  }
+
+  //Check whether to buzz the solenoid on and off
+  if (haptic_config.buzz) {
+    if (elapsed / SOLENOID_MIN_DWELL % 2 == 0){
+      if (!solenoid_buzzing) {
+        solenoid_buzzing = true;
+        writePinHigh(SOLENOID_PIN);
+      }
+    }
+    else {
+      if (solenoid_buzzing) {
+        solenoid_buzzing = false;
+        writePinLow(SOLENOID_PIN);
+      }
+    }
+  }
+}
+
+void solenoid_setup(void) {
+  setPinOutput(SOLENOID_PIN);
+  solenoid_fire();
+}
+
+void solenoid_shutdown(void) {
+  writePinLow(SOLENOID_PIN);
+
+}

drivers/haptic/solenoid.h

@@ -0,0 +1,54 @@
+/* Copyright 2018 mtdjr - modified by ishtob
+ * Driver for solenoid written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifndef SOLENOID_DEFAULT_DWELL
+#define SOLENOID_DEFAULT_DWELL 12
+#endif
+
+#ifndef SOLENOID_MAX_DWELL
+#define SOLENOID_MAX_DWELL 100
+#endif
+
+#ifndef SOLENOID_MIN_DWELL
+#define SOLENOID_MIN_DWELL 4
+#endif
+
+#ifndef SOLENOID_ACTIVE
+#define SOLENOID_ACTIVE false
+#endif
+
+#ifndef SOLENOID_PIN
+#define SOLENOID_PIN F6
+#endif
+
+void solenoid_buzz_on(void);
+void solenoid_buzz_off(void);
+void solenoid_set_buzz(int buzz);
+
+void solenoid_dwell_minus(uint8_t solenoid_dwell);
+void solenoid_dwell_plus(uint8_t solenoid_dwell);
+void solenoid_set_dwell(uint8_t dwell);
+
+void solenoid_stop(void);
+void solenoid_fire(void);
+
+void solenoid_check(void);
+
+void solenoid_setup(void);
+void solenoid_shutdown(void);

drivers/issi/is31fl3731-simple.c

@@ -0,0 +1,246 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "is31fl3731-simple.h"
+#include "i2c_master.h"
+#include "progmem.h"
+#include "print.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define ISSI_ADDR_DEFAULT 0x74
+
+#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00
+#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
+#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+
+#define ISSI_CONF_PICTUREMODE 0x00
+#define ISSI_CONF_AUTOFRAMEMODE 0x04
+#define ISSI_CONF_AUDIOMODE 0x08
+
+#define ISSI_REG_PICTUREFRAME  0x01
+
+#define ISSI_REG_SHUTDOWN 0x0A
+#define ISSI_REG_AUDIOSYNC 0x06
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[LED_DRIVER_COUNT][144];
+bool g_pwm_buffer_update_required = false;
+
+/* There's probably a better way to init this... */
+#if LED_DRIVER_COUNT == 1
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
+#elif LED_DRIVER_COUNT == 2
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
+#elif LED_DRIVER_COUNT == 3
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
+#elif LED_DRIVER_COUNT == 4
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
+#endif
+bool g_led_control_registers_update_required = false;
+
+// This is the bit pattern in the LED control registers
+// (for matrix A, add one to register for matrix B)
+//
+//  reg -  b7  b6  b5  b4  b3  b2  b1  b0
+// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
+// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
+// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
+// 0x06 -  - , - , - , - , - ,B02,B01,B00
+// 0x08 -  - , - , - , - , - , - , - , -
+// 0x0A - B17,B16,B15, - , - , - , - , -
+// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
+// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
+// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
+
+
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+    #if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+              break;
+            }
+        }
+    #else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+    #endif
+}
+
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
+    // assumes bank is already selected
+
+    // transmit PWM registers in 9 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for (int i = 0; i < 144; i += 16) {
+        // set the first register, e.g. 0x24, 0x34, 0x44, etc.
+        g_twi_transfer_buffer[0] = 0x24 + i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
+        for (int j = 0; j < 16; j++) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3731_init(uint8_t addr) {
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, first enable software shutdown,
+    // then set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // select "function register" bank
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+
+    // enable software shutdown
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
+    // this delay was copied from other drivers, might not be needed
+    wait_ms(10);
+
+    // picture mode
+    IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+    // display frame 0
+    IS31FL3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
+    // audio sync off
+    IS31FL3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
+
+    // select bank 0
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+
+    // turn off all LEDs in the LED control register
+    for (int i = 0x00; i <= 0x11; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // turn off all LEDs in the blink control register (not really needed)
+    for (int i = 0x12; i <= 0x23; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // set PWM on all LEDs to 0
+    for (int i = 0x24; i <= 0xB3; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // select "function register" bank
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+
+    // disable software shutdown
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
+
+    // select bank 0 and leave it selected.
+    // most usage after initialization is just writing PWM buffers in bank 0
+    // as there's not much point in double-buffering
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+
+}
+
+void IS31FL3731_set_value(int index, uint8_t value) {
+    if (index >= 0 && index < LED_DRIVER_LED_COUNT) {
+        is31_led led = g_is31_leds[index];
+
+        // Subtract 0x24 to get the second index of g_pwm_buffer
+        g_pwm_buffer[led.driver][led.v - 0x24] = value;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3731_set_value_all(uint8_t value) {
+    for (int i = 0; i < LED_DRIVER_LED_COUNT; i++) {
+        IS31FL3731_set_value(i, value);
+    }
+}
+
+void IS31FL3731_set_led_control_register(uint8_t index, bool value) {
+  is31_led led = g_is31_leds[index];
+
+  uint8_t control_register = (led.v - 0x24) / 8;
+  uint8_t bit_value = (led.v - 0x24) % 8;
+
+    if (value) {
+        g_led_control_registers[led.driver][control_register] |= (1 << bit_value);
+    } else {
+        g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value);
+    }
+
+    g_led_control_registers_update_required = true;
+}
+
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required) {
+        IS31FL3731_write_pwm_buffer(addr, g_pwm_buffer[index]);
+        g_pwm_buffer_update_required = false;
+    }
+}
+
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_led_control_registers_update_required) {
+        for (int i=0; i<18; i++) {
+            IS31FL3731_write_register(addr, i, g_led_control_registers[index][i]);
+        }
+    }
+}

drivers/issi/is31fl3731-simple.h

@@ -0,0 +1,210 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3731_DRIVER_H
+#define IS31FL3731_DRIVER_H
+
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t v;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[LED_DRIVER_LED_COUNT];
+
+void IS31FL3731_init(uint8_t addr);
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3731_set_value(int index, uint8_t value);
+void IS31FL3731_set_value_all(uint8_t value);
+
+void IS31FL3731_set_led_control_register(uint8_t index, bool value);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define C1_1  0x24
+#define C1_2  0x25
+#define C1_3  0x26
+#define C1_4  0x27
+#define C1_5  0x28
+#define C1_6  0x29
+#define C1_7  0x2A
+#define C1_8  0x2B
+
+#define C1_9  0x2C
+#define C1_10 0x2D
+#define C1_11 0x2E
+#define C1_12 0x2F
+#define C1_13 0x30
+#define C1_14 0x31
+#define C1_15 0x32
+#define C1_16 0x33
+
+#define C2_1  0x34
+#define C2_2  0x35
+#define C2_3  0x36
+#define C2_4  0x37
+#define C2_5  0x38
+#define C2_6  0x39
+#define C2_7  0x3A
+#define C2_8  0x3B
+
+#define C2_9  0x3C
+#define C2_10 0x3D
+#define C2_11 0x3E
+#define C2_12 0x3F
+#define C2_13 0x40
+#define C2_14 0x41
+#define C2_15 0x42
+#define C2_16 0x43
+
+#define C3_1  0x44
+#define C3_2  0x45
+#define C3_3  0x46
+#define C3_4  0x47
+#define C3_5  0x48
+#define C3_6  0x49
+#define C3_7  0x4A
+#define C3_8  0x4B
+
+#define C3_9  0x4C
+#define C3_10 0x4D
+#define C3_11 0x4E
+#define C3_12 0x4F
+#define C3_13 0x50
+#define C3_14 0x51
+#define C3_15 0x52
+#define C3_16 0x53
+
+#define C4_1  0x54
+#define C4_2  0x55
+#define C4_3  0x56
+#define C4_4  0x57
+#define C4_5  0x58
+#define C4_6  0x59
+#define C4_7  0x5A
+#define C4_8  0x5B
+
+#define C4_9  0x5C
+#define C4_10 0x5D
+#define C4_11 0x5E
+#define C4_12 0x5F
+#define C4_13 0x60
+#define C4_14 0x61
+#define C4_15 0x62
+#define C4_16 0x63
+
+#define C5_1  0x64
+#define C5_2  0x65
+#define C5_3  0x66
+#define C5_4  0x67
+#define C5_5  0x68
+#define C5_6  0x69
+#define C5_7  0x6A
+#define C5_8  0x6B
+
+#define C5_9  0x6C
+#define C5_10 0x6D
+#define C5_11 0x6E
+#define C5_12 0x6F
+#define C5_13 0x70
+#define C5_14 0x71
+#define C5_15 0x72
+#define C5_16 0x73
+
+#define C6_1  0x74
+#define C6_2  0x75
+#define C6_3  0x76
+#define C6_4  0x77
+#define C6_5  0x78
+#define C6_6  0x79
+#define C6_7  0x7A
+#define C6_8  0x7B
+
+#define C6_9  0x7C
+#define C6_10 0x7D
+#define C6_11 0x7E
+#define C6_12 0x7F
+#define C6_13 0x80
+#define C6_14 0x81
+#define C6_15 0x82
+#define C6_16 0x83
+
+#define C7_1  0x84
+#define C7_2  0x85
+#define C7_3  0x86
+#define C7_4  0x87
+#define C7_5  0x88
+#define C7_6  0x89
+#define C7_7  0x8A
+#define C7_8  0x8B
+
+#define C7_9  0x8C
+#define C7_10 0x8D
+#define C7_11 0x8E
+#define C7_12 0x8F
+#define C7_13 0x90
+#define C7_14 0x91
+#define C7_15 0x92
+#define C7_16 0x93
+
+#define C8_1  0x94
+#define C8_2  0x95
+#define C8_3  0x96
+#define C8_4  0x97
+#define C8_5  0x98
+#define C8_6  0x99
+#define C8_7  0x9A
+#define C8_8  0x9B
+
+#define C8_9  0x9C
+#define C8_10 0x9D
+#define C8_11 0x9E
+#define C8_12 0x9F
+#define C8_13 0xA0
+#define C8_14 0xA1
+#define C8_15 0xA2
+#define C8_16 0xA3
+
+#define C9_1  0xA4
+#define C9_2  0xA5
+#define C9_3  0xA6
+#define C9_4  0xA7
+#define C9_5  0xA8
+#define C9_6  0xA9
+#define C9_7  0xAA
+#define C9_8  0xAB
+
+#define C9_9  0xAC
+#define C9_10 0xAD
+#define C9_11 0xAE
+#define C9_12 0xAF
+#define C9_13 0xB0
+#define C9_14 0xB1
+#define C9_15 0xB2
+#define C9_16 0xB3
+
+
+#endif // IS31FL3731_DRIVER_H

drivers/issi/is31fl3733.c

@@ -24,10 +24,10 @@
 #include "wait.h"
 #endif
 
+#include "is31fl3733.h"
 #include <string.h>
 #include "i2c_master.h"
 #include "progmem.h"
-#include "rgb_matrix.h"
 
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)

drivers/issi/is31fl3737.c

@@ -0,0 +1,252 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+#include "rgb_matrix.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
+#define ISSI_PAGE_PWM 0x01        //PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
+#define ISSI_PAGE_FUNCTION 0x03   //PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 //PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
+#define ISSI_REG_RESET 0x11// PG3
+#define ISSI_REG_SWPULLUP 0x0F //PG3
+#define ISSI_REG_CSPULLUP 0x10 //PG3
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3737 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3737_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 } };
+bool g_led_control_registers_update_required = false;
+
+void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes PG1 is already selected
+
+    // transmit PWM registers in 12 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 192; i += 16 ) {
+        g_twi_transfer_buffer[0] = i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3737_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Unlock the command register.
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG0
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    // Turn off all LEDs.
+    for ( int i = 0x00; i <= 0x17; i++ )
+    {
+        IS31FL3737_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG1
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    // Set PWM on all LEDs to 0
+    // No need to setup Breath registers to PWM as that is the default.
+    for ( int i = 0x00; i <= 0xBF; i++ )
+    {
+        IS31FL3737_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG3
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    // Set global current to maximum.
+    IS31FL3737_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    // Disable software shutdown.
+    IS31FL3737_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+
+    // Wait 10ms to ensure the device has woken up.
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+}
+
+void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        g_pwm_buffer[led.driver][led.r] = red;
+        g_pwm_buffer[led.driver][led.g] = green;
+        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31FL3737_set_color( i, red, green, blue );
+    }
+}
+
+void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+  uint8_t control_register_r = led.r / 8;
+  uint8_t control_register_g = led.g / 8;
+  uint8_t control_register_b = led.b / 8;
+  uint8_t bit_r = led.r % 8;
+  uint8_t bit_g = led.g % 8;
+  uint8_t bit_b = led.b % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG1
+        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+
+        IS31FL3737_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        //IS31FL3737_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG0
+        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        for ( int i=0; i<24; i++ )
+        {
+            IS31FL3737_write_register(addr1, i, g_led_control_registers[0][i] );
+            //IS31FL3737_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}

drivers/issi/is31fl3737.h

@@ -0,0 +1,207 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3737_DRIVER_H
+#define IS31FL3737_DRIVER_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3737_init( uint8_t addr );
+void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define A_1   0x00
+#define A_2   0x01
+#define A_3   0x02
+#define A_4   0x03
+#define A_5   0x04
+#define A_6   0x05
+#define A_7   0x08
+#define A_8   0x09
+#define A_9   0x0A
+#define A_10  0x0B
+#define A_11  0x0C
+#define A_12  0x0D
+
+#define B_1   0x10
+#define B_2   0x11
+#define B_3   0x12
+#define B_4   0x13
+#define B_5   0x14
+#define B_6   0x15
+#define B_7   0x18
+#define B_8   0x19
+#define B_9   0x1A
+#define B_10  0x1B
+#define B_11  0x1C
+#define B_12  0x1D
+
+#define C_1   0x20
+#define C_2   0x21
+#define C_3   0x22
+#define C_4   0x23
+#define C_5   0x24
+#define C_6   0x25
+#define C_7   0x28
+#define C_8   0x29
+#define C_9   0x2A
+#define C_10  0x2B
+#define C_11  0x2C
+#define C_12  0x2D
+
+#define D_1   0x30
+#define D_2   0x31
+#define D_3   0x32
+#define D_4   0x33
+#define D_5   0x34
+#define D_6   0x35
+#define D_7   0x38
+#define D_8   0x39
+#define D_9   0x3A
+#define D_10  0x3B
+#define D_11  0x3C
+#define D_12  0x3D
+
+#define E_1   0x40
+#define E_2   0x41
+#define E_3   0x42
+#define E_4   0x43
+#define E_5   0x44
+#define E_6   0x45
+#define E_7   0x48
+#define E_8   0x49
+#define E_9   0x4A
+#define E_10  0x4B
+#define E_11  0x4C
+#define E_12  0x4D
+
+#define F_1   0x50
+#define F_2   0x51
+#define F_3   0x52
+#define F_4   0x53
+#define F_5   0x54
+#define F_6   0x55
+#define F_7   0x58
+#define F_8   0x59
+#define F_9   0x5A
+#define F_10  0x5B
+#define F_11  0x5C
+#define F_12  0x5D
+
+#define G_1   0x60
+#define G_2   0x61
+#define G_3   0x62
+#define G_4   0x63
+#define G_5   0x64
+#define G_6   0x65
+#define G_7   0x68
+#define G_8   0x69
+#define G_9   0x6A
+#define G_10  0x6B
+#define G_11  0x6C
+#define G_12  0x6D
+
+#define H_1   0x70
+#define H_2   0x71
+#define H_3   0x72
+#define H_4   0x73
+#define H_5   0x74
+#define H_6   0x75
+#define H_7   0x78
+#define H_8   0x79
+#define H_9   0x7A
+#define H_10  0x7B
+#define H_11  0x7C
+#define H_12  0x7D
+
+#define I_1   0x80
+#define I_2   0x81
+#define I_3   0x82
+#define I_4   0x83
+#define I_5   0x84
+#define I_6   0x85
+#define I_7   0x88
+#define I_8   0x89
+#define I_9   0x8A
+#define I_10  0x8B
+#define I_11  0x8C
+#define I_12  0x8D
+
+#define J_1   0x90
+#define J_2   0x91
+#define J_3   0x92
+#define J_4   0x93
+#define J_5   0x94
+#define J_6   0x95
+#define J_7   0x98
+#define J_8   0x99
+#define J_9   0x9A
+#define J_10  0x9B
+#define J_11  0x9C
+#define J_12  0x9D
+
+#define K_1   0xA0
+#define K_2   0xA1
+#define K_3   0xA2
+#define K_4   0xA3
+#define K_5   0xA4
+#define K_6   0xA5
+#define K_7   0xA8
+#define K_8   0xA9
+#define K_9   0xAA
+#define K_10  0xAB
+#define K_11  0xAC
+#define K_12  0xAD
+
+#define L_1   0xB0
+#define L_2   0xB1
+#define L_3   0xB2
+#define L_4   0xB3
+#define L_5   0xB4
+#define L_6   0xB5
+#define L_7   0xB8
+#define L_8   0xB9
+#define L_9   0xBA
+#define L_10  0xBB
+#define L_11  0xBC
+#define L_12  0xBD
+
+#endif // IS31FL3737_DRIVER_H

drivers/qwiic/micro_oled.c

@@ -28,6 +28,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "micro_oled.h"
+#include <print.h>
 #include <stdlib.h>
 #include "util/font5x7.h"
 #include "util/font8x16.h"
@@ -309,12 +310,11 @@ static uint8_t micro_oled_screen_buffer[] = {
 #else
 //catchall for custom screen szies
     static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {0};
-#endif  
+#endif
 
 
 
 void micro_oled_init(void) {
-
   i2c_init();
   i2c_start(I2C_ADDRESS_SA0_1);
 

keyboards/1upkeyboards/1up60hse/1up60hse.h

@@ -13,8 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef KB_H
-#define KB_H
+#pragma once
 
 #include "quantum.h"
 
@@ -36,4 +35,3 @@
 	{ K30,  K31,  K32,  K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, KC_NO, KC_NO, K3D }, \
 	{ K40,  K41,  K42,  KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B,   KC_NO, K4D }  \
 }
-#endif

keyboards/1upkeyboards/1up60hse/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, E6, D1, D0, D2, D3, D5, D6, D7 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B7
@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-