Moving cannonkeys boards to one place, eeprom fix (#4999)

* Move boards to cannonkeys and share resources

* Share common files between cannonkey boards

* Fix ortho60 keymap

* update LED numbers

* Add RGB keys to Ortho60 and Ortho48

* Add Backlight control to default layout Ortho60 and 48

* Remove unnecessary ws2812.c SRC from rules.mk

Vagrantfile

@@ -2,8 +2,11 @@
 # vi: set ft=ruby :
 
 Vagrant.configure(2) do |config|
-  # VMware/Virtualbox 64 bit
-  config.vm.box = "phusion/ubuntu-14.04-amd64"
+  # define a name instead of just 'default'
+  config.vm.define "qmk_firmware"
+
+  # VMware/Virtualbox ( and also Hyperv/Parallels) 64 bit
+  config.vm.box = "bento/ubuntu-16.04"
 
   # This section allows you to customize the Virtualbox VM
   # settings, ie showing the GUI or upping the memory
@@ -15,13 +18,16 @@ Vagrant.configure(2) do |config|
     # your Teensy via the VM rather than your host OS
     #vb.customize ['modifyvm', :id, '--usb', 'on']
     #vb.customize ['usbfilter', 'add', '0',
-    #    	  '--target', :id,
-    #    	  '--name', 'teensy',
-    #    	  '--vendorid', '0x16c0',
-    #    	  '--productid','0x0478'
-    #		 ]
+    #         '--target', :id,
+    #         '--name', 'teensy',
+    #         '--vendorid', '0x16c0',
+    #         '--productid','0x0478'
+    #        ]
     # Customize the amount of memory on the VM:
     vb.memory = "512"
+    # Uncomment the below lines if you have time sync
+    # issues with make and incremental builds
+    #vb.customize [ "guestproperty", "set", :id, "/VirtualBox/GuestAdd/VBoxService/--timesync-set-threshold", 1000 ]
   end
 
   # This section allows you to customize the VMware VM
@@ -56,19 +62,18 @@ Vagrant.configure(2) do |config|
   # This script ensures the required packages for AVR programming are installed
   # It also ensures the system always gets the latest updates when powered on
   # If this causes issues you can run a 'vagrant destroy' and then
-  # add a # before ,args: and run 'vagrant up' to get a working
+  # add a # before ,run: (or change "always" to "once") and run 'vagrant up' to get a working
   # non-updated box and then attempt to troubleshoot or open a Github issue
-
-  config.vm.provision "shell", run: "always", path: "./util/qmk_install.sh", args: "-update"
+  config.vm.provision "shell", inline: "/bin/sh -c 'yes | /vagrant/util/qmk_install.sh'", run: "always"
 
   config.vm.post_up_message = <<-EOT
 
   Log into the VM using 'vagrant ssh'. QMK directory synchronized with host is
   located at /vagrant
-  To compile the .hex files use make command inside this directory.
+  To compile the .hex files use make command inside this directory, e.g.
+     cd /vagrant
+     make <keyboard>:default
 
-  QMK's make format recently changed to use folder locations and colons:
-     make project_folder:keymap[:target]
   Examples:
      make planck/rev4:default:dfu
      make planck:default

common_features.mk

@@ -254,6 +254,7 @@ QUANTUM_SRC:= \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
 
+# Include the standard or split matrix code if needed
 ifneq ($(strip $(CUSTOM_MATRIX)), yes)
     ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
         QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
@@ -262,11 +263,25 @@ ifneq ($(strip $(CUSTOM_MATRIX)), yes)
     endif
 endif
 
+# Include the standard debounce code if needed
+ifneq ($(strip $(CUSTOM_DEBOUNCE)), yes)
+    QUANTUM_SRC += $(QUANTUM_DIR)/debounce.c
+endif
+
 ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
     OPT_DEFS += -DSPLIT_KEYBOARD
+
+    # Include files used by all split keyboards
     QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
-                $(QUANTUM_DIR)/split_common/split_util.c
-    QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/i2c.c
-    QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/serial.c
+                   $(QUANTUM_DIR)/split_common/split_util.c
+
+    # Determine which (if any) transport files are required
+    ifneq ($(strip $(SPLIT_TRANSPORT)), custom)
+        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c
+        # Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
+        # Unused functions are pruned away, which is why we can add both drivers here without bloat.
+        QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/i2c.c \
+                           $(QUANTUM_DIR)/split_common/serial.c
+    endif
     COMMON_VPATH += $(QUANTUM_PATH)/split_common
 endif

docs/config_options.md

@@ -87,7 +87,7 @@ This is a C header file that is one of the first things included, and will persi
   * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 * `#define LOCKING_RESYNC_ENABLE`
   * tries to keep switch state consistent with keyboard LED state
-* `#define IS_COMMAND() ( keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) )`
+* `#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))`
   * key combination that allows the use of magic commands (useful for debugging)
 * `#define USB_MAX_POWER_CONSUMPTION`
   * sets the maximum power (in mA) over USB for the device (default: 500)
@@ -143,7 +143,7 @@ If you define these options you will enable the associated feature, which may in
   * Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle)
 * `#define LEADER_TIMEOUT 300`
   * how long before the leader key times out
-    * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped. 
+    * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.
 * `#define LEADER_PER_KEY_TIMING`
   * sets the timer for leader key chords to run on each key press rather than overall
 * `#define LEADER_KEY_STRICT_KEY_PROCESSING`
@@ -197,6 +197,9 @@ If you define these options you will enable the associated feature, which may in
 
 Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
 
+* `SPLIT_TRANSPORT = custom`
+  * Allows replacing the standard split communication routines with a custom one. ARM based split keyboards must use this at present.
+
 ### Setting Handedness
 
 One thing to remember, the side that the USB port is plugged into is always the master half. The side not plugged into USB is the slave.
@@ -208,7 +211,7 @@ There are a few different ways to set handedness for split keyboards (listed in
 3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
 4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
 
-* `#define SPLIT_HAND_PIN B7` 
+* `#define SPLIT_HAND_PIN B7`
   * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
 
 * `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` is not defined)
@@ -302,6 +305,10 @@ Use these to enable or disable building certain features. The more you have enab
   * Current options are AdafruitEzKey, AdafruitBLE, RN42
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+* `CUSTOM_MATRIX`
+  * Allows replacing the standard matrix scanning routine with a custom one.
+* `CUSTOM_DEBOUNCE`
+  * Allows replacing the standard key debouncing routine with a custom one.
 * `WAIT_FOR_USB`
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`

docs/custom_quantum_functions.md

@@ -90,7 +90,7 @@ keyrecord_t record {
 
 # LED Control
 
-This allows you to control the 5 LED's defined as part of the USB Keyboard spec. It will be called when the state of one of those 5 LEDs changes.
+QMK provides methods to read the 5 LEDs defined as part of the HID spec:
 
 * `USB_LED_NUM_LOCK`
 * `USB_LED_CAPS_LOCK`
@@ -98,31 +98,44 @@ This allows you to control the 5 LED's defined as part of the USB Keyboard spec.
 * `USB_LED_COMPOSE`
 * `USB_LED_KANA`
 
+These five constants correspond to the positional bits of the host LED state.
+There are two ways to get the host LED state:
+
+* by implementing `led_set_user()`
+* by calling `host_keyboard_leds()`
+
+## `led_set_user()`
+
+This function will be called when the state of one of those 5 LEDs changes. It receives the LED state as a parameter.
+Use the `IS_LED_ON(usb_led, led_name)` and `IS_LED_OFF(usb_led, led_name)` macros to check the LED status.
+
+!> `host_keyboard_leds()` may already reflect a new value before `led_set_user()` is called.
+
 ### Example `led_set_user()` Implementation
 
 ```c
 void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
         PORTB |= (1<<0);
     } else {
         PORTB &= ~(1<<0);
     }
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
         PORTB |= (1<<1);
     } else {
         PORTB &= ~(1<<1);
     }
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
         PORTB |= (1<<2);
     } else {
         PORTB &= ~(1<<2);
     }
-    if (usb_led & (1<<USB_LED_COMPOSE)) {
+    if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) {
         PORTB |= (1<<3);
     } else {
         PORTB &= ~(1<<3);
     }
-    if (usb_led & (1<<USB_LED_KANA)) {
+    if (IS_LED_ON(usb_led, USB_LED_KANA)) {
         PORTB |= (1<<4);
     } else {
         PORTB &= ~(1<<4);
@@ -135,10 +148,26 @@ void led_set_user(uint8_t usb_led) {
 * Keyboard/Revision: `void led_set_kb(uint8_t usb_led)`
 * Keymap: `void led_set_user(uint8_t usb_led)`
 
+## `host_keyboard_leds()`
+
+Call this function to get the last received LED state. This is useful for reading the LED state outside `led_set_*`, e.g. in [`matrix_scan_user()`](#matrix-scanning-code).
+For convenience, you can use the `IS_HOST_LED_ON(led_name)` and `IS_HOST_LED_OFF(led_name)` macros instead of calling and checking `host_keyboard_leds()` directly.
+
+## Setting Physical LED State
+
+Some keyboard implementations provide convenience methods for setting the state of the physical LEDs.
+
+### Ergodox Boards
+
+The Ergodox implementations provide `ergodox_right_led_1`/`2`/`3_on`/`off()` to turn individual LEDs on or off, as well as `ergodox_right_led_on`/`off(uint8_t led)` to turn them on or off by their index.
+
+In addition, it is possible to specify the brightness level of all LEDs with `ergodox_led_all_set(uint8_t n)`; of individual LEDs with `ergodox_right_led_1`/`2`/`3_set(uint8_t n)`; or by index with `ergodox_right_led_set(uint8_t led, uint8_t n)`.
+
+Ergodox boards also define `LED_BRIGHTNESS_LO` for the lowest brightness and `LED_BRIGHTNESS_HI` for the highest brightness (which is the default).
 
 # Matrix Initialization Code
 
-Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i&#xb2;c controllers you will need to set up that hardware before it can be used.
+Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LEDs or i&#xb2;c controllers you will need to set up that hardware before it can be used.
 
 
 ### Example `matrix_init_user()` Implementation
@@ -176,7 +205,7 @@ This example has been deliberately omitted. You should understand enough about Q
 
 This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot.
 
-You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LED's or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
+You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LEDs or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
 
 
 # Keyboard Idling/Wake Code

docs/feature_advanced_keycodes.md

@@ -25,7 +25,7 @@ These functions allow you to activate layers in various ways. Note that layers a
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
-* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
+* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers: `MOD_LCTL`, `MOD_LSFT`, `MOD_LALT`, `MOD_LGUI` (note the use of `MOD_` constants instead of `KC_`). These modifiers can be combined using bitwise OR, e.g. `LM(_RAISE, MOD_LCTL | MOD_LALT)`.
 * `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
 * `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys](#one-shot-keys) for details and additional functionality.
 * `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
@@ -60,21 +60,21 @@ Sometimes, you might want to switch between layers in a macro or as part of a ta
 
 These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.
 
-|Key       |Aliases               |Description                                         |
-|----------|----------------------|----------------------------------------------------|
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|`ALGR(kc)`            |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|Key       |Aliases                        |Description                                         |
+|----------|-------------------------------|----------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
 
 You can also chain them, for example `LCTL(LALT(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.
 
@@ -110,20 +110,20 @@ For convenience, QMK includes some Mod-Tap shortcuts to make common combinations
 |Key         |Aliases                                                          |Description                                            |
 |------------|-----------------------------------------------------------------|-------------------------------------------------------|
 |`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
 |`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
 |`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
-|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 |`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 
 ## Caveats
 

docs/feature_backlight.md

@@ -40,6 +40,7 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
 |---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
 |`BACKLIGHT_PIN`      |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
 |`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 15 excluding off)                                                   |
+|`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                             |
 |`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if hardware PWM is used                                                          |
 |`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
 

docs/feature_command.md

@@ -16,35 +16,35 @@ To use Command, hold down the key combination defined by the `IS_COMMAND()` macr
 
 If you would like to change the key assignments for Command, `#define` these in your `config.h` at either the keyboard or keymap level. All keycode assignments here must omit the `KC_` prefix.
 
-|Define                              |Default                                                                               |Description                                     |
-|------------------------------------|--------------------------------------------------------------------------------------|------------------------------------------------|
-|`IS_COMMAND()`                      |<code>(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                                |Set default layer with the Function row         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                                |Set default layer with the number keys          |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                               |Set default layer with `MAGIC_KEY_LAYER0..9`    |
-|`MAGIC_KEY_DEBUG`                   |`D`                                                                                   |Toggle debugging over serial                    |
-|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                                   |Toggle key matrix debugging                     |
-|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                                   |Toggle keyboard debugging                       |
-|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                                   |Toggle mouse debugging                          |
-|`MAGIC_KEY_CONSOLE`                 |`C`                                                                                   |Enable the Command console                      |
-|`MAGIC_KEY_VERSION`                 |`V`                                                                                   |Print the running QMK version to the console    |
-|`MAGIC_KEY_STATUS`                  |`S`                                                                                   |Print the current keyboard status to the console|
-|`MAGIC_KEY_HELP1`                   |`H`                                                                                   |Print Command help to the console               |
-|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                               |Print Command help to the console (alternate)   |
-|`MAGIC_KEY_LAYER0`                  |`0`                                                                                   |Make layer 0 the default layer                  |
-|`MAGIC_KEY_LAYER1`                  |`1`                                                                                   |Make layer 1 the default layer                  |
-|`MAGIC_KEY_LAYER2`                  |`2`                                                                                   |Make layer 2 the default layer                  |
-|`MAGIC_KEY_LAYER3`                  |`3`                                                                                   |Make layer 3 the default layer                  |
-|`MAGIC_KEY_LAYER4`                  |`4`                                                                                   |Make layer 4 the default layer                  |
-|`MAGIC_KEY_LAYER5`                  |`5`                                                                                   |Make layer 5 the default layer                  |
-|`MAGIC_KEY_LAYER6`                  |`6`                                                                                   |Make layer 6 the default layer                  |
-|`MAGIC_KEY_LAYER7`                  |`7`                                                                                   |Make layer 7 the default layer                  |
-|`MAGIC_KEY_LAYER8`                  |`8`                                                                                   |Make layer 8 the default layer                  |
-|`MAGIC_KEY_LAYER9`                  |`9`                                                                                   |Make layer 9 the default layer                  |
-|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                                 |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                               |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                               |Enter the bootloader                            |
-|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                                |Lock the keyboard so nothing can be typed       |
-|`MAGIC_KEY_EEPROM`                  |`E`                                                                                   |Clear the EEPROM                                |
-|`MAGIC_KEY_NKRO`                    |`N`                                                                                   |Toggle N-Key Rollover (NKRO)                    |
-|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                                   |Toggle LED when computer is sleeping            |
+|Define                              |Default                                                                    |Description                                     |
+|------------------------------------|---------------------------------------------------------------------------|------------------------------------------------|
+|`IS_COMMAND()`                      |<code>(get_mods() == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                     |Set default layer with the Function row         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                     |Set default layer with the number keys          |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                    |Set default layer with `MAGIC_KEY_LAYER0..9`    |
+|`MAGIC_KEY_DEBUG`                   |`D`                                                                        |Toggle debugging over serial                    |
+|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                        |Toggle key matrix debugging                     |
+|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                        |Toggle keyboard debugging                       |
+|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                        |Toggle mouse debugging                          |
+|`MAGIC_KEY_CONSOLE`                 |`C`                                                                        |Enable the Command console                      |
+|`MAGIC_KEY_VERSION`                 |`V`                                                                        |Print the running QMK version to the console    |
+|`MAGIC_KEY_STATUS`                  |`S`                                                                        |Print the current keyboard status to the console|
+|`MAGIC_KEY_HELP1`                   |`H`                                                                        |Print Command help to the console               |
+|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                    |Print Command help to the console (alternate)   |
+|`MAGIC_KEY_LAYER0`                  |`0`                                                                        |Make layer 0 the default layer                  |
+|`MAGIC_KEY_LAYER1`                  |`1`                                                                        |Make layer 1 the default layer                  |
+|`MAGIC_KEY_LAYER2`                  |`2`                                                                        |Make layer 2 the default layer                  |
+|`MAGIC_KEY_LAYER3`                  |`3`                                                                        |Make layer 3 the default layer                  |
+|`MAGIC_KEY_LAYER4`                  |`4`                                                                        |Make layer 4 the default layer                  |
+|`MAGIC_KEY_LAYER5`                  |`5`                                                                        |Make layer 5 the default layer                  |
+|`MAGIC_KEY_LAYER6`                  |`6`                                                                        |Make layer 6 the default layer                  |
+|`MAGIC_KEY_LAYER7`                  |`7`                                                                        |Make layer 7 the default layer                  |
+|`MAGIC_KEY_LAYER8`                  |`8`                                                                        |Make layer 8 the default layer                  |
+|`MAGIC_KEY_LAYER9`                  |`9`                                                                        |Make layer 9 the default layer                  |
+|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                      |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                    |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                    |Enter the bootloader                            |
+|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                     |Lock the keyboard so nothing can be typed       |
+|`MAGIC_KEY_EEPROM`                  |`E`                                                                        |Clear the EEPROM                                |
+|`MAGIC_KEY_NKRO`                    |`N`                                                                        |Toggle N-Key Rollover (NKRO)                    |
+|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                        |Toggle LED when computer is sleeping            |

docs/feature_encoders.md

@@ -32,15 +32,19 @@ The callback functions can be inserted into your `<keyboard>.c`:
 or `keymap.c`:
 
     void encoder_update_user(uint8_t index, bool clockwise) {
-        if (index == 0) {
-            if (clockwise) {
-                register_code(KC_PGDN);
-                unregister_code(KC_PGDN);
-            } else {
-                register_code(KC_PGUP);
-                unregister_code(KC_PGUP);
-            }
+      if (index == 0) { /* First encoder */
+        if (clockwise) {
+          tap_code(KC_PGDN);
+        } else {
+          tap_code(KC_PGUP);
         }
+      } else if (index == 2) {
+        if (clockwise) {
+          tap_code(KC_UP);
+        } else {
+          tap_code(KC_DOWN);
+        }
+      }
     }
 
 ## Hardware

docs/features.md

@@ -11,6 +11,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Combos](feature_combo.md) - Custom actions for multiple key holds.
 * [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic").
 * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
+* [Encoders](feature_encoders.md) - Rotary encoders! 
 * [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. 
 * [HD44780 LCD Display](feature_hd44780.md) - Support for LCD character displays using the HD44780 standard.
 * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state.

docs/getting_started_make_guide.md

@@ -97,7 +97,7 @@ This allows you to send Unicode characters using `UC(<code point>)` in your keym
 
 `UNICODEMAP_ENABLE`
 
-This allows you to send Unicode characters using `X(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported. 
+This allows you to send Unicode characters using `X(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported.
 
 `UCIS_ENABLE`
 
@@ -135,6 +135,18 @@ This enables [key lock](feature_key_lock.md). This consumes an additional 260 by
 
 This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 
+`SPLIT_TRANSPORT`
+
+As there is no standard split communication driver for ARM-based split keyboards yet, `SPLIT_TRANSPORT = custom` must be used for these. It will prevent the standard split keyboard communication code (which is AVR-specific) from being included, allowing a custom implementation to be used.
+
+`CUSTOM_MATRIX`
+
+Lets you replace the default matrix scanning routine with your own code. You will need to provide your own implementations of matrix_init() and matrix_scan().
+
+`CUSTOM_DEBOUNCE`
+
+Lets you replace the default key debouncing routine with your own code. You will need to provide your own implementation of debounce().
+
 ## Customizing Makefile Options on a Per-Keymap Basis
 
 If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.

docs/internals_gpio_control.md

@@ -1,6 +1,6 @@
 # GPIO Control
 
-QMK has a GPIO control abstraction layer which is micro-controller agnostic. This is done to allow easy access to pin control across different platforms.
+QMK has a GPIO control abstraction layer which is microcontroller agnostic. This is done to allow easy access to pin control across different platforms.
 
 ## Functions
 
@@ -17,7 +17,7 @@ The following functions can provide basic control of GPIOs and are found in `qua
 |`writePin(pin, level)`|Set pin level, assuming it is an output                           |
 |`readPin(pin)`        |Returns the level of the pin                                      |
 
-## Advance settings
+## Advanced Settings
 
-Each micro-controller can have multiple advance settings regarding its GPIO. This abstraction layer does not limit the use of architecture specific functions. Advance users should consult the datasheet of there desired device and include any needed libraries. For AVR the standard avr/io.h library is used and for STM32 the Chibios [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
+Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
 

docs/isp_flashing_guide.md

@@ -53,7 +53,7 @@ This is pretty straight-forward - we'll be connecting like-things to like-things
 The only difference between the .hex files below is which pin is connected to RESET. You can use them on other boards as well, as long as you're aware of the pins being used. If for some reason neither of these pins are available, [create an issue](https://github.com/qmk/qmk_firmware/issues/new), and we can generate one for you!
 
 * Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`)
-* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_mico_ISP_B6_10.hex) (`B6/10`)
+* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_micro_ISP_B6_10.hex) (`B6/10`)
 
 **Flash your Teenys/Pro Micro with one of these and continue - you won't need the file after flashing your ISP device.**
 

docs/keycodes.md

@@ -6,205 +6,205 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Basic Keycodes](keycodes_basic.md)
 
-|Key                    |Aliases             |Description                                    |
-|-----------------------|--------------------|-----------------------------------------------|
-|`KC_NO`                |`XXXXXXX`           |Ignore this key (NOOP)                         |
-|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`|Use the next lowest non-transparent key        |
-|`KC_A`                 |                    |`a` and `A`                                    |
-|`KC_B`                 |                    |`b` and `B`                                    |
-|`KC_C`                 |                    |`c` and `C`                                    |
-|`KC_D`                 |                    |`d` and `D`                                    |
-|`KC_E`                 |                    |`e` and `E`                                    |
-|`KC_F`                 |                    |`f` and `F`                                    |
-|`KC_G`                 |                    |`g` and `G`                                    |
-|`KC_H`                 |                    |`h` and `H`                                    |
-|`KC_I`                 |                    |`i` and `I`                                    |
-|`KC_J`                 |                    |`j` and `J`                                    |
-|`KC_K`                 |                    |`k` and `K`                                    |
-|`KC_L`                 |                    |`l` and `L`                                    |
-|`KC_M`                 |                    |`m` and `M`                                    |
-|`KC_N`                 |                    |`n` and `N`                                    |
-|`KC_O`                 |                    |`o` and `O`                                    |
-|`KC_P`                 |                    |`p` and `P`                                    |
-|`KC_Q`                 |                    |`q` and `Q`                                    |
-|`KC_R`                 |                    |`r` and `R`                                    |
-|`KC_S`                 |                    |`s` and `S`                                    |
-|`KC_T`                 |                    |`t` and `T`                                    |
-|`KC_U`                 |                    |`u` and `U`                                    |
-|`KC_V`                 |                    |`v` and `V`                                    |
-|`KC_W`                 |                    |`w` and `W`                                    |
-|`KC_X`                 |                    |`x` and `X`                                    |
-|`KC_Y`                 |                    |`y` and `Y`                                    |
-|`KC_Z`                 |                    |`z` and `Z`                                    |
-|`KC_1`                 |                    |`1` and `!`                                    |
-|`KC_2`                 |                    |`2` and `@`                                    |
-|`KC_3`                 |                    |`3` and `#`                                    |
-|`KC_4`                 |                    |`4` and `$`                                    |
-|`KC_5`                 |                    |`5` and `%`                                    |
-|`KC_6`                 |                    |`6` and `^`                                    |
-|`KC_7`                 |                    |`7` and `&`                                    |
-|`KC_8`                 |                    |`8` and `*`                                    |
-|`KC_9`                 |                    |`9` and `(`                                    |
-|`KC_0`                 |                    |`0` and `)`                                    |
-|`KC_ENTER`             |`KC_ENT`            |Return (Enter)                                 |
-|`KC_ESCAPE`            |`KC_ESC`            |Escape                                         |
-|`KC_BSPACE`            |`KC_BSPC`           |Delete (Backspace)                             |
-|`KC_TAB`               |                    |Tab                                            |
-|`KC_SPACE`             |`KC_SPC`            |Spacebar                                       |
-|`KC_MINUS`             |`KC_MINS`           |`-` and `_`                                    |
-|`KC_EQUAL`             |`KC_EQL`            |`=` and `+`                                    |
-|`KC_LBRACKET`          |`KC_LBRC`           |`[` and `{`                                    |
-|`KC_RBRACKET`          |`KC_RBRC`           |`]` and `}`                                    |
-|`KC_BSLASH`            |`KC_BSLS`           |`\` and <code>&#124;</code>                    |
-|`KC_NONUS_HASH`        |`KC_NUHS`           |Non-US `#` and `~`                             |
-|`KC_SCOLON`            |`KC_SCLN`           |`;` and `:`                                    |
-|`KC_QUOTE`             |`KC_QUOT`           |`'` and `"`                                    |
-|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK` |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
-|`KC_COMMA`             |`KC_COMM`           |`,` and `<`                                    |
-|`KC_DOT`               |                    |`.` and `>`                                    |
-|`KC_SLASH`             |`KC_SLSH`           |`/` and `?`                                    |
-|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`|Caps Lock                                      |
-|`KC_F1`                |                    |F1                                             |
-|`KC_F2`                |                    |F2                                             |
-|`KC_F3`                |                    |F3                                             |
-|`KC_F4`                |                    |F4                                             |
-|`KC_F5`                |                    |F5                                             |
-|`KC_F6`                |                    |F6                                             |
-|`KC_F7`                |                    |F7                                             |
-|`KC_F8`                |                    |F8                                             |
-|`KC_F9`                |                    |F9                                             |
-|`KC_F10`               |                    |F10                                            |
-|`KC_F11`               |                    |F11                                            |
-|`KC_F12`               |                    |F12                                            |
-|`KC_PSCREEN`           |`KC_PSCR`           |Print Screen                                   |
-|`KC_SCROLLLOCK`        |`KC_SLCK`           |Scroll Lock                                    |
-|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK` |Pause                                          |
-|`KC_INSERT`            |`KC_INS`            |Insert                                         |
-|`KC_HOME`              |                    |Home                                           |
-|`KC_PGUP`              |                    |Page Up                                        |
-|`KC_DELETE`            |`KC_DEL`            |Forward Delete                                 |
-|`KC_END`               |                    |End                                            |
-|`KC_PGDOWN`            |`KC_PGDN`           |Page Down                                      |
-|`KC_RIGHT`             |`KC_RGHT`           |Right Arrow                                    |
-|`KC_LEFT`              |                    |Left Arrow                                     |
-|`KC_DOWN`              |                    |Down Arrow                                     |
-|`KC_UP`                |                    |Up Arrow                                       |
-|`KC_NUMLOCK`           |`KC_NLCK`           |Keypad Num Lock and Clear                      |
-|`KC_KP_SLASH`          |`KC_PSLS`           |Keypad `/`                                     |
-|`KC_KP_ASTERISK`       |`KC_PAST`           |Keypad `*`                                     |
-|`KC_KP_MINUS`          |`KC_PMNS`           |Keypad `-`                                     |
-|`KC_KP_PLUS`           |`KC_PPLS`           |Keypad `+`                                     |
-|`KC_KP_ENTER`          |`KC_PENT`           |Keypad Enter                                   |
-|`KC_KP_1`              |`KC_P1`             |Keypad `1` and End                             |
-|`KC_KP_2`              |`KC_P2`             |Keypad `2` and Down Arrow                      |
-|`KC_KP_3`              |`KC_P3`             |Keypad `3` and Page Down                       |
-|`KC_KP_4`              |`KC_P4`             |Keypad `4` and Left Arrow                      |
-|`KC_KP_5`              |`KC_P5`             |Keypad `5`                                     |
-|`KC_KP_6`              |`KC_P6`             |Keypad `6` and Right Arrow                     |
-|`KC_KP_7`              |`KC_P7`             |Keypad `7` and Home                            |
-|`KC_KP_8`              |`KC_P8`             |Keypad `8` and Up Arrow                        |
-|`KC_KP_9`              |`KC_P9`             |Keypad `9` and Page Up                         |
-|`KC_KP_0`              |`KC_P0`             |Keypad `0` and Insert                          |
-|`KC_KP_DOT`            |`KC_PDOT`           |Keypad `.` and Delete                          |
-|`KC_NONUS_BSLASH`      |`KC_NUBS`           |Non-US `\` and <code>&#124;</code>             |
-|`KC_APPLICATION`       |`KC_APP`            |Application (Windows Menu Key)                 |
-|`KC_POWER`             |                    |System Power (macOS)                           |
-|`KC_KP_EQUAL`          |`KC_PEQL`           |Keypad `=`                                     |
-|`KC_F13`               |                    |F13                                            |
-|`KC_F14`               |                    |F14                                            |
-|`KC_F15`               |                    |F15                                            |
-|`KC_F16`               |                    |F16                                            |
-|`KC_F17`               |                    |F17                                            |
-|`KC_F18`               |                    |F18                                            |
-|`KC_F19`               |                    |F19                                            |
-|`KC_F20`               |                    |F20                                            |
-|`KC_F21`               |                    |F21                                            |
-|`KC_F22`               |                    |F22                                            |
-|`KC_F23`               |                    |F23                                            |
-|`KC_F24`               |                    |F24                                            |
-|`KC_EXECUTE`           |`KC_EXEC`           |Execute                                        |
-|`KC_HELP`              |                    |Help                                           |
-|`KC_MENU`              |                    |Menu                                           |
-|`KC_SELECT`            |`KC_SLCT`           |Select                                         |
-|`KC_STOP`              |                    |Stop                                           |
-|`KC_AGAIN`             |`KC_AGIN`           |Again                                          |
-|`KC_UNDO`              |                    |Undo                                           |
-|`KC_CUT`               |                    |Cut                                            |
-|`KC_COPY`              |                    |Copy                                           |
-|`KC_PASTE`             |`KC_PSTE`           |Paste                                          |
-|`KC_FIND`              |                    |Find                                           |
-|`KC__MUTE`             |                    |Mute (macOS)                                   |
-|`KC__VOLUP`            |                    |Volume Up (macOS)                              |
-|`KC__VOLDOWN`          |                    |Volume Down (macOS)                            |
-|`KC_LOCKING_CAPS`      |`KC_LCAP`           |Locking Caps Lock                              |
-|`KC_LOCKING_NUM`       |`KC_LNUM`           |Locking Num Lock                               |
-|`KC_LOCKING_SCROLL`    |`KC_LSCR`           |Locking Scroll Lock                            |
-|`KC_KP_COMMA`          |`KC_PCMM`           |Keypad `,`                                     |
-|`KC_KP_EQUAL_AS400`    |                    |Keypad `=` on AS/400 keyboards                 |
-|`KC_INT1`              |`KC_RO`             |JIS `\` and `_`                                |
-|`KC_INT2`              |`KC_KANA`           |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`           |JIS `¥` and <code>&#124;</code>                |
-|`KC_INT4`              |`KC_HENK`           |JIS Henkan                                     |
-|`KC_INT5`              |`KC_MHEN`           |JIS Muhenkan                                   |
-|`KC_INT6`              |                    |JIS Numpad `,`                                 |
-|`KC_INT7`              |                    |International 7                                |
-|`KC_INT8`              |                    |International 8                                |
-|`KC_INT9`              |                    |International 9                                |
-|`KC_LANG1`             |`KC_HAEN`           |Hangul/English                                 |
-|`KC_LANG2`             |`KC_HANJ`           |Hanja                                          |
-|`KC_LANG3`             |                    |JIS Katakana                                   |
-|`KC_LANG4`             |                    |JIS Hiragana                                   |
-|`KC_LANG5`             |                    |JIS Zenkaku/Hankaku                            |
-|`KC_LANG6`             |                    |Language 6                                     |
-|`KC_LANG7`             |                    |Language 7                                     |
-|`KC_LANG8`             |                    |Language 8                                     |
-|`KC_LANG9`             |                    |Language 9                                     |
-|`KC_ALT_ERASE`         |`KC_ERAS`           |Alternate Erase                                |
-|`KC_SYSREQ`            |                    |SysReq/Attention                               |
-|`KC_CANCEL`            |                    |Cancel                                         |
-|`KC_CLEAR`             |`KC_CLR`            |Clear                                          |
-|`KC_PRIOR`             |                    |Prior                                          |
-|`KC_RETURN`            |                    |Return                                         |
-|`KC_SEPARATOR`         |                    |Separator                                      |
-|`KC_OUT`               |                    |Out                                            |
-|`KC_OPER`              |                    |Oper                                           |
-|`KC_CLEAR_AGAIN`       |                    |Clear/Again                                    |
-|`KC_CRSEL`             |                    |CrSel/Props                                    |
-|`KC_EXSEL`             |                    |ExSel                                          |
-|`KC_LCTRL`             |`KC_LCTL`           |Left Control                                   |
-|`KC_LSHIFT`            |`KC_LSFT`           |Left Shift                                     |
-|`KC_LALT`              |                    |Left Alt                                       |
-|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key)            |
-|`KC_RCTRL`             |`KC_RCTL`           |Right Control                                  |
-|`KC_RSHIFT`            |`KC_RSFT`           |Right Shift                                    |
-|`KC_RALT`              |`KC_ALGR`           |Right Alt (AltGr)                              |
-|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)           |
-|`KC_SYSTEM_POWER`      |`KC_PWR`            |System Power Down                              |
-|`KC_SYSTEM_SLEEP`      |`KC_SLEP`           |System Sleep                                   |
-|`KC_SYSTEM_WAKE`       |`KC_WAKE`           |System Wake                                    |
-|`KC_AUDIO_MUTE`        |`KC_MUTE`           |Mute                                           |
-|`KC_AUDIO_VOL_UP`      |`KC_VOLU`           |Volume Up                                      |
-|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`           |Volume Down                                    |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`           |Next Track (Windows)                           |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`           |Previous Track (Windows)                       |
-|`KC_MEDIA_STOP`        |`KC_MSTP`           |Stop Track (Windows)                           |
-|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`           |Play/Pause Track                               |
-|`KC_MEDIA_SELECT`      |`KC_MSEL`           |Launch Media Player (Windows)                  |
-|`KC_MEDIA_EJECT`       |`KC_EJCT`           |Eject (macOS)                                  |
-|`KC_MAIL`              |                    |Launch Mail (Windows)                          |
-|`KC_CALCULATOR`        |`KC_CALC`           |Launch Calculator (Windows)                    |
-|`KC_MY_COMPUTER`       |`KC_MYCM`           |Launch My Computer (Windows)                   |
-|`KC_WWW_SEARCH`        |`KC_WSCH`           |Browser Search (Windows)                       |
-|`KC_WWW_HOME`          |`KC_WHOM`           |Browser Home (Windows)                         |
-|`KC_WWW_BACK`          |`KC_WBAK`           |Browser Back (Windows)                         |
-|`KC_WWW_FORWARD`       |`KC_WFWD`           |Browser Forward (Windows)                      |
-|`KC_WWW_STOP`          |`KC_WSTP`           |Browser Stop (Windows)                         |
-|`KC_WWW_REFRESH`       |`KC_WREF`           |Browser Refresh (Windows)                      |
-|`KC_WWW_FAVORITES`     |`KC_WFAV`           |Browser Favorites (Windows)                    |
-|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`           |Next Track (macOS)                             |
-|`KC_MEDIA_REWIND`      |`KC_MRWD`           |Previous Track (macOS)                         |
-|`KC_BRIGHTNESS_UP`     |`KC_BRIU`           |Brightness Up                                  |
-|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`           |Brightness Down                                |
+|Key                    |Aliases                       |Description                                    |
+|-----------------------|------------------------------|-----------------------------------------------|
+|`KC_NO`                |`XXXXXXX`                     |Ignore this key (NOOP)                         |
+|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`          |Use the next lowest non-transparent key        |
+|`KC_A`                 |                              |`a` and `A`                                    |
+|`KC_B`                 |                              |`b` and `B`                                    |
+|`KC_C`                 |                              |`c` and `C`                                    |
+|`KC_D`                 |                              |`d` and `D`                                    |
+|`KC_E`                 |                              |`e` and `E`                                    |
+|`KC_F`                 |                              |`f` and `F`                                    |
+|`KC_G`                 |                              |`g` and `G`                                    |
+|`KC_H`                 |                              |`h` and `H`                                    |
+|`KC_I`                 |                              |`i` and `I`                                    |
+|`KC_J`                 |                              |`j` and `J`                                    |
+|`KC_K`                 |                              |`k` and `K`                                    |
+|`KC_L`                 |                              |`l` and `L`                                    |
+|`KC_M`                 |                              |`m` and `M`                                    |
+|`KC_N`                 |                              |`n` and `N`                                    |
+|`KC_O`                 |                              |`o` and `O`                                    |
+|`KC_P`                 |                              |`p` and `P`                                    |
+|`KC_Q`                 |                              |`q` and `Q`                                    |
+|`KC_R`                 |                              |`r` and `R`                                    |
+|`KC_S`                 |                              |`s` and `S`                                    |
+|`KC_T`                 |                              |`t` and `T`                                    |
+|`KC_U`                 |                              |`u` and `U`                                    |
+|`KC_V`                 |                              |`v` and `V`                                    |
+|`KC_W`                 |                              |`w` and `W`                                    |
+|`KC_X`                 |                              |`x` and `X`                                    |
+|`KC_Y`                 |                              |`y` and `Y`                                    |
+|`KC_Z`                 |                              |`z` and `Z`                                    |
+|`KC_1`                 |                              |`1` and `!`                                    |
+|`KC_2`                 |                              |`2` and `@`                                    |
+|`KC_3`                 |                              |`3` and `#`                                    |
+|`KC_4`                 |                              |`4` and `$`                                    |
+|`KC_5`                 |                              |`5` and `%`                                    |
+|`KC_6`                 |                              |`6` and `^`                                    |
+|`KC_7`                 |                              |`7` and `&`                                    |
+|`KC_8`                 |                              |`8` and `*`                                    |
+|`KC_9`                 |                              |`9` and `(`                                    |
+|`KC_0`                 |                              |`0` and `)`                                    |
+|`KC_ENTER`             |`KC_ENT`                      |Return (Enter)                                 |
+|`KC_ESCAPE`            |`KC_ESC`                      |Escape                                         |
+|`KC_BSPACE`            |`KC_BSPC`                     |Delete (Backspace)                             |
+|`KC_TAB`               |                              |Tab                                            |
+|`KC_SPACE`             |`KC_SPC`                      |Spacebar                                       |
+|`KC_MINUS`             |`KC_MINS`                     |`-` and `_`                                    |
+|`KC_EQUAL`             |`KC_EQL`                      |`=` and `+`                                    |
+|`KC_LBRACKET`          |`KC_LBRC`                     |`[` and `{`                                    |
+|`KC_RBRACKET`          |`KC_RBRC`                     |`]` and `}`                                    |
+|`KC_BSLASH`            |`KC_BSLS`                     |`\` and <code>&#124;</code>                    |
+|`KC_NONUS_HASH`        |`KC_NUHS`                     |Non-US `#` and `~`                             |
+|`KC_SCOLON`            |`KC_SCLN`                     |`;` and `:`                                    |
+|`KC_QUOTE`             |`KC_QUOT`                     |`'` and `"`                                    |
+|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK`           |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
+|`KC_COMMA`             |`KC_COMM`                     |`,` and `<`                                    |
+|`KC_DOT`               |                              |`.` and `>`                                    |
+|`KC_SLASH`             |`KC_SLSH`                     |`/` and `?`                                    |
+|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`          |Caps Lock                                      |
+|`KC_F1`                |                              |F1                                             |
+|`KC_F2`                |                              |F2                                             |
+|`KC_F3`                |                              |F3                                             |
+|`KC_F4`                |                              |F4                                             |
+|`KC_F5`                |                              |F5                                             |
+|`KC_F6`                |                              |F6                                             |
+|`KC_F7`                |                              |F7                                             |
+|`KC_F8`                |                              |F8                                             |
+|`KC_F9`                |                              |F9                                             |
+|`KC_F10`               |                              |F10                                            |
+|`KC_F11`               |                              |F11                                            |
+|`KC_F12`               |                              |F12                                            |
+|`KC_PSCREEN`           |`KC_PSCR`                     |Print Screen                                   |
+|`KC_SCROLLLOCK`        |`KC_SLCK`, `KC_BRMD`          |Scroll Lock, Brightness Down (macOS)           |
+|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)                   |
+|`KC_INSERT`            |`KC_INS`                      |Insert                                         |
+|`KC_HOME`              |                              |Home                                           |
+|`KC_PGUP`              |                              |Page Up                                        |
+|`KC_DELETE`            |`KC_DEL`                      |Forward Delete                                 |
+|`KC_END`               |                              |End                                            |
+|`KC_PGDOWN`            |`KC_PGDN`                     |Page Down                                      |
+|`KC_RIGHT`             |`KC_RGHT`                     |Right Arrow                                    |
+|`KC_LEFT`              |                              |Left Arrow                                     |
+|`KC_DOWN`              |                              |Down Arrow                                     |
+|`KC_UP`                |                              |Up Arrow                                       |
+|`KC_NUMLOCK`           |`KC_NLCK`                     |Keypad Num Lock and Clear                      |
+|`KC_KP_SLASH`          |`KC_PSLS`                     |Keypad `/`                                     |
+|`KC_KP_ASTERISK`       |`KC_PAST`                     |Keypad `*`                                     |
+|`KC_KP_MINUS`          |`KC_PMNS`                     |Keypad `-`                                     |
+|`KC_KP_PLUS`           |`KC_PPLS`                     |Keypad `+`                                     |
+|`KC_KP_ENTER`          |`KC_PENT`                     |Keypad Enter                                   |
+|`KC_KP_1`              |`KC_P1`                       |Keypad `1` and End                             |
+|`KC_KP_2`              |`KC_P2`                       |Keypad `2` and Down Arrow                      |
+|`KC_KP_3`              |`KC_P3`                       |Keypad `3` and Page Down                       |
+|`KC_KP_4`              |`KC_P4`                       |Keypad `4` and Left Arrow                      |
+|`KC_KP_5`              |`KC_P5`                       |Keypad `5`                                     |
+|`KC_KP_6`              |`KC_P6`                       |Keypad `6` and Right Arrow                     |
+|`KC_KP_7`              |`KC_P7`                       |Keypad `7` and Home                            |
+|`KC_KP_8`              |`KC_P8`                       |Keypad `8` and Up Arrow                        |
+|`KC_KP_9`              |`KC_P9`                       |Keypad `9` and Page Up                         |
+|`KC_KP_0`              |`KC_P0`                       |Keypad `0` and Insert                          |
+|`KC_KP_DOT`            |`KC_PDOT`                     |Keypad `.` and Delete                          |
+|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and <code>&#124;</code>             |
+|`KC_APPLICATION`       |`KC_APP`                      |Application (Windows Menu Key)                 |
+|`KC_POWER`             |                              |System Power (macOS)                           |
+|`KC_KP_EQUAL`          |`KC_PEQL`                     |Keypad `=`                                     |
+|`KC_F13`               |                              |F13                                            |
+|`KC_F14`               |                              |F14                                            |
+|`KC_F15`               |                              |F15                                            |
+|`KC_F16`               |                              |F16                                            |
+|`KC_F17`               |                              |F17                                            |
+|`KC_F18`               |                              |F18                                            |
+|`KC_F19`               |                              |F19                                            |
+|`KC_F20`               |                              |F20                                            |
+|`KC_F21`               |                              |F21                                            |
+|`KC_F22`               |                              |F22                                            |
+|`KC_F23`               |                              |F23                                            |
+|`KC_F24`               |                              |F24                                            |
+|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |
+|`KC_HELP`              |                              |Help                                           |
+|`KC_MENU`              |                              |Menu                                           |
+|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |
+|`KC_STOP`              |                              |Stop                                           |
+|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |
+|`KC_UNDO`              |                              |Undo                                           |
+|`KC_CUT`               |                              |Cut                                            |
+|`KC_COPY`              |                              |Copy                                           |
+|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |
+|`KC_FIND`              |                              |Find                                           |
+|`KC__MUTE`             |                              |Mute (macOS)                                   |
+|`KC__VOLUP`            |                              |Volume Up (macOS)                              |
+|`KC__VOLDOWN`          |                              |Volume Down (macOS)                            |
+|`KC_LOCKING_CAPS`      |`KC_LCAP`                     |Locking Caps Lock                              |
+|`KC_LOCKING_NUM`       |`KC_LNUM`                     |Locking Num Lock                               |
+|`KC_LOCKING_SCROLL`    |`KC_LSCR`                     |Locking Scroll Lock                            |
+|`KC_KP_COMMA`          |`KC_PCMM`                     |Keypad `,`                                     |
+|`KC_KP_EQUAL_AS400`    |                              |Keypad `=` on AS/400 keyboards                 |
+|`KC_INT1`              |`KC_RO`                       |JIS `\` and `_`                                |
+|`KC_INT2`              |`KC_KANA`                     |JIS Katakana/Hiragana                          |
+|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and <code>&#124;</code>                |
+|`KC_INT4`              |`KC_HENK`                     |JIS Henkan                                     |
+|`KC_INT5`              |`KC_MHEN`                     |JIS Muhenkan                                   |
+|`KC_INT6`              |                              |JIS Numpad `,`                                 |
+|`KC_INT7`              |                              |International 7                                |
+|`KC_INT8`              |                              |International 8                                |
+|`KC_INT9`              |                              |International 9                                |
+|`KC_LANG1`             |`KC_HAEN`                     |Hangul/English                                 |
+|`KC_LANG2`             |`KC_HANJ`                     |Hanja                                          |
+|`KC_LANG3`             |                              |JIS Katakana                                   |
+|`KC_LANG4`             |                              |JIS Hiragana                                   |
+|`KC_LANG5`             |                              |JIS Zenkaku/Hankaku                            |
+|`KC_LANG6`             |                              |Language 6                                     |
+|`KC_LANG7`             |                              |Language 7                                     |
+|`KC_LANG8`             |                              |Language 8                                     |
+|`KC_LANG9`             |                              |Language 9                                     |
+|`KC_ALT_ERASE`         |`KC_ERAS`                     |Alternate Erase                                |
+|`KC_SYSREQ`            |                              |SysReq/Attention                               |
+|`KC_CANCEL`            |                              |Cancel                                         |
+|`KC_CLEAR`             |`KC_CLR`                      |Clear                                          |
+|`KC_PRIOR`             |                              |Prior                                          |
+|`KC_RETURN`            |                              |Return                                         |
+|`KC_SEPARATOR`         |                              |Separator                                      |
+|`KC_OUT`               |                              |Out                                            |
+|`KC_OPER`              |                              |Oper                                           |
+|`KC_CLEAR_AGAIN`       |                              |Clear/Again                                    |
+|`KC_CRSEL`             |                              |CrSel/Props                                    |
+|`KC_EXSEL`             |                              |ExSel                                          |
+|`KC_LCTRL`             |`KC_LCTL`                     |Left Control                                   |
+|`KC_LSHIFT`            |`KC_LSFT`                     |Left Shift                                     |
+|`KC_LALT`              |                              |Left Alt                                       |
+|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`          |Left GUI (Windows/Command/Meta key)            |
+|`KC_RCTRL`             |`KC_RCTL`                     |Right Control                                  |
+|`KC_RSHIFT`            |`KC_RSFT`                     |Right Shift                                    |
+|`KC_RALT`              |`KC_ALGR`                     |Right Alt (AltGr)                              |
+|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`          |Right GUI (Windows/Command/Meta key)           |
+|`KC_SYSTEM_POWER`      |`KC_PWR`                      |System Power Down                              |
+|`KC_SYSTEM_SLEEP`      |`KC_SLEP`                     |System Sleep                                   |
+|`KC_SYSTEM_WAKE`       |`KC_WAKE`                     |System Wake                                    |
+|`KC_AUDIO_MUTE`        |`KC_MUTE`                     |Mute                                           |
+|`KC_AUDIO_VOL_UP`      |`KC_VOLU`                     |Volume Up                                      |
+|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`                     |Volume Down                                    |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track (Windows)                           |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track (Windows)                       |
+|`KC_MEDIA_STOP`        |`KC_MSTP`                     |Stop Track (Windows)                           |
+|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`                     |Play/Pause Track                               |
+|`KC_MEDIA_SELECT`      |`KC_MSEL`                     |Launch Media Player (Windows)                  |
+|`KC_MEDIA_EJECT`       |`KC_EJCT`                     |Eject (macOS)                                  |
+|`KC_MAIL`              |                              |Launch Mail (Windows)                          |
+|`KC_CALCULATOR`        |`KC_CALC`                     |Launch Calculator (Windows)                    |
+|`KC_MY_COMPUTER`       |`KC_MYCM`                     |Launch My Computer (Windows)                   |
+|`KC_WWW_SEARCH`        |`KC_WSCH`                     |Browser Search (Windows)                       |
+|`KC_WWW_HOME`          |`KC_WHOM`                     |Browser Home (Windows)                         |
+|`KC_WWW_BACK`          |`KC_WBAK`                     |Browser Back (Windows)                         |
+|`KC_WWW_FORWARD`       |`KC_WFWD`                     |Browser Forward (Windows)                      |
+|`KC_WWW_STOP`          |`KC_WSTP`                     |Browser Stop (Windows)                         |
+|`KC_WWW_REFRESH`       |`KC_WREF`                     |Browser Refresh (Windows)                      |
+|`KC_WWW_FAVORITES`     |`KC_WFAV`                     |Browser Favorites (Windows)                    |
+|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`                     |Next Track (macOS)                             |
+|`KC_MEDIA_REWIND`      |`KC_MRWD`                     |Previous Track (macOS)                         |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`                     |Brightness Up                                  |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`                     |Brightness Down                                |
 
 ## [Quantum Keycodes](quantum_keycodes.md#qmk-keycodes)
 
@@ -238,8 +238,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`MU_TOG`        |         |Toggles Music Mode                |
 |`MU_MOD`        |         |Cycles through the music modes    |
 
-
-
 ## [Backlighting](feature_backlight.md)
 
 |Key      |Description                               |
@@ -285,7 +283,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OUT_USB` |USB only                                      |
 |`OUT_BT`  |Bluetooth only                                |
 
-
 ## [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
 
 |Key             |Description                                                                       |
@@ -293,7 +290,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`DF(layer)`     |Set the base (default) layer                                                      |
 |`MO(layer)`     |Momentarily turn on `layer` when pressed (requires `KC_TRNS` on destination layer)|
 |`OSL(layer)`    |Momentarily activates `layer` until a key is pressed. See [One Shot Keys](https://docs.qmk.fm/#/feature_advanced_keycodes?id=one-shot-keys) for details. |
-|`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well. 
+|`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well.  Where `mod` is a mods_bit.  Mods can be viewed [here](https://docs.qmk.fm/#/feature_advanced_keycodes?id=mod-tap).  Example Implementation: `LM(LAYER_1, MOD_LALT)`|
 |`LT(layer, kc)` |Turn on `layer` when held, `kc` when tapped                                       |
 |`TG(layer)`     |Toggle `layer` on or off                                                          |
 |`TO(layer)`     |Turn on `layer` when pressed                                                      |
@@ -322,43 +319,43 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Modifiers](feature_advanced_keycodes.md#modifier-keys)
 
-|Key       |Aliases               |Description                                         |
-|----------|----------------------|----------------------------------------------------|
-|`KC_HYPR` |                      |Hold Left Control, Shift, Alt and GUI               |
-|`KC_MEH`  |                      |Hold Left Control, Shift and Alt                    |
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|`ALGR(kc)`            |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|Key       |Aliases                        |Description                                         |
+|----------|-------------------------------|----------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`KC_MEH`  |                               |Left Control, Shift and Alt                         |
+|`KC_HYPR` |                               |Left Control, Shift, Alt and GUI                    |
 
 ## [Mod-Tap Keys](feature_advanced_keycodes.md#mod-tap)
 
 |Key         |Aliases                                                          |Description                                            |
 |------------|-----------------------------------------------------------------|-------------------------------------------------------|
 |`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
 |`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
 |`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
-|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 |`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 
 ## [RGB Lighting](feature_rgblight.md)
 
@@ -439,7 +436,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OSM(mod)`  |Hold `mod` for one keypress       |
 |`OSL(layer)`|Switch to `layer` for one keypress|
 
-
 ## [Swap Hands](feature_swap_hands.md)
 
 |Key        |Description                                                              |

docs/keycodes_basic.md

@@ -97,14 +97,14 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Lock Keys
 
-|Key                |Aliases             |Description              |
-|-------------------|--------------------|-------------------------|
-|`KC_CAPSLOCK`      |`KC_CLCK`, `KC_CAPS`|Caps Lock                |
-|`KC_SCROLLLOCK`    |`KC_SLCK`           |Scroll Lock              |
-|`KC_NUMLOCK`       |`KC_NLCK`           |Keypad Num Lock and Clear|
-|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock        |
-|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock         |
-|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock      |
+|Key                |Aliases             |Description                         |
+|-------------------|--------------------|------------------------------------|
+|`KC_CAPSLOCK`      |`KC_CLCK`, `KC_CAPS`|Caps Lock                           |
+|`KC_SCROLLLOCK`    |`KC_SLCK`, `KC_BRMD`|Scroll Lock, Brightness Down (macOS)|
+|`KC_NUMLOCK`       |`KC_NLCK`           |Keypad Num Lock and Clear           |
+|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock                   |
+|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock                    |
+|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock                 |
 
 ## Modifiers
 
@@ -144,48 +144,48 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Commands
 
-|Key               |Aliases            |Description                   |
-|------------------|-------------------|------------------------------|
-|`KC_PSCREEN`      |`KC_PSCR`          |Print Screen                  |
-|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`|Pause                         |
-|`KC_INSERT`       |`KC_INS`           |Insert                        |
-|`KC_HOME`         |                   |Home                          |
-|`KC_PGUP`         |                   |Page Up                       |
-|`KC_DELETE`       |`KC_DEL`           |Forward Delete                |
-|`KC_END`          |                   |End                           |
-|`KC_PGDOWN`       |`KC_PGDN`          |Page Down                     |
-|`KC_RIGHT`        |`KC_RGHT`          |Right Arrow                   |
-|`KC_LEFT`         |                   |Left Arrow                    |
-|`KC_DOWN`         |                   |Down Arrow                    |
-|`KC_UP`           |                   |Up Arrow                      |
-|`KC_APPLICATION`  |`KC_APP`           |Application (Windows Menu Key)|
-|`KC_POWER`        |                   |System Power (macOS/Linux)    |
-|`KC_EXECUTE`      |`KC_EXEC`          |Execute                       |
-|`KC_HELP`         |                   |Help                          |
-|`KC_MENU`         |                   |Menu                          |
-|`KC_SELECT`       |`KC_SLCT`          |Select                        |
-|`KC_STOP`         |                   |Stop                          |
-|`KC_AGAIN`        |`KC_AGIN`          |Again                         |
-|`KC_UNDO`         |                   |Undo                          |
-|`KC_CUT`          |                   |Cut                           |
-|`KC_COPY`         |                   |Copy                          |
-|`KC_PASTE`        |`KC_PSTE`          |Paste                         |
-|`KC_FIND`         |                   |Find                          |
-|`KC__MUTE`        |                   |Mute (macOS)                  |
-|`KC__VOLUP`       |                   |Volume Up (macOS)             |
-|`KC__VOLDOWN`     |                   |Volume Down (macOS)           |
-|`KC_ALT_ERASE`    |`KC_ERAS`          |Alternate Erase               |
-|`KC_SYSREQ`       |                   |SysReq/Attention              |
-|`KC_CANCEL`       |                   |Cancel                        |
-|`KC_CLEAR`        |`KC_CLR`           |Clear                         |
-|`KC_PRIOR`        |                   |Prior                         |
-|`KC_RETURN`       |                   |Return                        |
-|`KC_SEPARATOR`    |                   |Separator                     |
-|`KC_OUT`          |                   |Out                           |
-|`KC_OPER`         |                   |Oper                          |
-|`KC_CLEAR_AGAIN`  |                   |Clear/Again                   |
-|`KC_CRSEL`        |                   |CrSel/Props                   |
-|`KC_EXSEL`        |                   |ExSel                         |
+|Key               |Aliases                       |Description                   |
+|------------------|------------------------------|------------------------------|
+|`KC_PSCREEN`      |`KC_PSCR`                     |Print Screen                  |
+|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)  |
+|`KC_INSERT`       |`KC_INS`                      |Insert                        |
+|`KC_HOME`         |                              |Home                          |
+|`KC_PGUP`         |                              |Page Up                       |
+|`KC_DELETE`       |`KC_DEL`                      |Forward Delete                |
+|`KC_END`          |                              |End                           |
+|`KC_PGDOWN`       |`KC_PGDN`                     |Page Down                     |
+|`KC_RIGHT`        |`KC_RGHT`                     |Right Arrow                   |
+|`KC_LEFT`         |                              |Left Arrow                    |
+|`KC_DOWN`         |                              |Down Arrow                    |
+|`KC_UP`           |                              |Up Arrow                      |
+|`KC_APPLICATION`  |`KC_APP`                      |Application (Windows Menu Key)|
+|`KC_POWER`        |                              |System Power (macOS/Linux)    |
+|`KC_EXECUTE`      |`KC_EXEC`                     |Execute                       |
+|`KC_HELP`         |                              |Help                          |
+|`KC_MENU`         |                              |Menu                          |
+|`KC_SELECT`       |`KC_SLCT`                     |Select                        |
+|`KC_STOP`         |                              |Stop                          |
+|`KC_AGAIN`        |`KC_AGIN`                     |Again                         |
+|`KC_UNDO`         |                              |Undo                          |
+|`KC_CUT`          |                              |Cut                           |
+|`KC_COPY`         |                              |Copy                          |
+|`KC_PASTE`        |`KC_PSTE`                     |Paste                         |
+|`KC_FIND`         |                              |Find                          |
+|`KC__MUTE`        |                              |Mute (macOS)                  |
+|`KC__VOLUP`       |                              |Volume Up (macOS)             |
+|`KC__VOLDOWN`     |                              |Volume Down (macOS)           |
+|`KC_ALT_ERASE`    |`KC_ERAS`                     |Alternate Erase               |
+|`KC_SYSREQ`       |                              |SysReq/Attention              |
+|`KC_CANCEL`       |                              |Cancel                        |
+|`KC_CLEAR`        |`KC_CLR`                      |Clear                         |
+|`KC_PRIOR`        |                              |Prior                         |
+|`KC_RETURN`       |                              |Return                        |
+|`KC_SEPARATOR`    |                              |Separator                     |
+|`KC_OUT`          |                              |Out                           |
+|`KC_OPER`         |                              |Oper                          |
+|`KC_CLEAR_AGAIN`  |                              |Clear/Again                   |
+|`KC_CRSEL`        |                              |CrSel/Props                   |
+|`KC_EXSEL`        |                              |ExSel                         |
 
 ## Media Keys
 

docs/newbs.md

@@ -6,10 +6,11 @@ Not sure if your keyboard can run QMK? If it's a mechanical keyboard you built y
 
 ## Overview
 
-There are 6 main sections to this guide:
+There are 7 main sections to this guide:
 
 * [Getting Started](newbs_getting_started.md)
-* [Building Your First Firmware](newbs_building_firmware.md)
+* [Building Your First Firmware using the command line](newbs_building_firmware.md)
+* [Building Your First Firmware using the online GUI](newbs_building_firmware_configurator.md)
 * [Flashing Firmware](newbs_flashing.md)
 * [Testing and Debugging](newbs_testing_debugging.md)
 * [Git Best Practices](newbs_best_practices.md)

docs/newbs_building_firmware_configurator.md

@@ -0,0 +1,105 @@
+# QMK Configurator
+
+The [QMK Configurator](https://config.qmk.fm) is an online graphical user interface that generates QMK Firmware hex files.  
+
+?> **Please follow these steps in order.**
+
+Watch the [Video Tutorial](https://youtu.be/7RH-1pAbjvw)
+
+The QMK Configurator works best with Chrome/Firefox. 
+
+
+!> **Files from other tools such as KLE, or kbfirmware will not be compatible with QMK Configurator. Do not load them, do not import them. QMK Configurator is a DIFFERENT tool. **
+
+## Selecting your keyboard
+
+Click the drop down box and select the keyboard you want to create a keymap for. 
+
+?> If your keyboard has several versions, make sure you select the correct one.** 
+
+I'll say that again because it's important
+
+!> **MAKE SURE YOU SELECT THE RIGHT VERSION!**
+
+If your keyboard has been advertised to be powered by QMK but is not in the list, chances are a developer hasn't gotten to it yet or we haven't had a chance to merge it in yet. File an issue at [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) requesting to support that particular keyboard, if there is no active [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) for it. There are also QMK powered keyboards that are in their manufacturer's own github accounts. Double check for that as well. 
+
+## Selecting your keyboard layout
+
+Choose the layout that best represents the keymap you want to create. Some keyboards do not have enough layouts or correct layouts defined yet. They will be supported in the future. 
+
+## Keymap Name
+
+Call this keymap what you want. 
+
+?> If you are running into issues when compiling, it may be worth changing this name, as it may already exist in the QMK  Firmware repo.
+
+## Creating Your Keymap
+
+Keycode Entry is accomplished in 3 ways.  
+1. Drag and dropping 
+2. Clicking on an empty spot on the layout and clicking the keycode you desire
+3. Clicking on an empty spot on the layout, pressing the physical key on your keyboard. 
+
+Hover your mouse over a key and a short blurb will tell you what that keycode does. For a more verbose description please see    
+
+[Basic Keycode Reference](https://docs.qmk.fm/#/keycodes_basic)    
+[Advanced Keycode Reference](https://docs.qmk.fm/#/feature_advanced_keycodes)    
+
+In the event that you can't find a layout that supports your keymap, for example three spots for spacebar, or two spots for backspace, or 2 spots for shift etc etc, Fill them ALL up. 
+
+### Example:
+
+3 spots for spacebar: Fill them ALL with spacebar
+
+2 spots for backspace: Fill them BOTH with backspace
+
+2 spots for right shift: Fill them BOTH with right shift
+
+1 spot for left shift and 1 spot for iso support: Fill them both with left shift
+
+5 spots, but only 4 keys: Guess and check or ask someone who has done it before. 
+
+## Saving Your Keymap for Future Edits
+
+When you're satisfied with your keymap or just want to work on it later, press the `Export Keymap` button. It will save your keymap as the name you chose above appended with .json. 
+
+You can then load this .json file in the future by pressing the `Import Keymap` button. 
+
+!> **CAUTION:** This is not the same type of .json file used for kbfirmware.com or any other tool. If you try to use this for those tools, or the .json from those tools with QMK Configurator, there is a chance your keyboard will **explode**. 
+
+## Generating your firmware file
+
+Press the green `Compile` button.
+
+When the compilation is done, you will be able to press the green `Download Firmware` button. 
+
+## Flashing Your Keyboard
+
+Please refer to [Flashing Firmware](newbs_flashing.md)
+
+## Troubleshooting
+
+#### My .json file is not working
+
+If the .json file was generated with QMK Configurator, congratulations you have stumbled upon a bug. File an issue at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)
+
+If not....how did you miss my big bold message at the top saying not to use other .json files? 
+
+#### There are extra spaces in my layout? What do I do? 
+
+If you're referring to having three spots for space bar, the best course of action is to just fill them all with space bar. The same can be done for backspace and shifts
+
+#### What is the keycode for.......
+
+Please see
+
+[Basic Keycode Reference](https://docs.qmk.fm/#/keycodes_basic)    
+[Advanced Keycode Reference](https://docs.qmk.fm/#/feature_advanced_keycodes)    
+
+#### It won't compile
+
+Please double check the other layers of your keymap to make sure there are no random keys present. 
+
+## Problems and Bugs
+
+We are always accepting customer requests and bug reports. Please file them at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)

docs/newbs_getting_started.md

@@ -6,7 +6,10 @@ QMK tries to put a lot of power into your hands by making easy things easy, and
 
 # Getting Started
 
-Before you can build keymaps, you need to install some software and set up your build environment. This only has to be done once no matter how many keyboards you plan to compile firmware for.
+Before you can build keymaps, you need to install some software and set up your build environment. This only has to be done once no matter how many keyboards you plan to compile firmware for. 
+
+If you would prefer a more graphical user interface approach, please consider using the online [QMK Configurator](https://config.qmk.fm). Please refer to [Building Your First Firmware using the online GUI](newbs_building_firmware_configurator.md). 
+
 
 ## Download Software
 

drivers/avr/i2c_slave.c

@@ -9,23 +9,26 @@
 
 #include "i2c_slave.h"
 
-void i2c_init(uint8_t address){
+volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
+
+static volatile uint8_t buffer_address;
+static volatile bool slave_has_register_set = false;
+
+void i2c_slave_init(uint8_t address){
     // load address into TWI address register
     TWAR = (address << 1);
     // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
     TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }
 
-void i2c_stop(void){
+void i2c_slave_stop(void){
     // clear acknowledge and enable bits
     TWCR &= ~((1 << TWEA) | (1 << TWEN));
 }
 
 ISR(TWI_vect){
     uint8_t ack = 1;
-    // temporary stores the received data
-    //uint8_t data;
-    
+
     switch(TW_STATUS){
         case TW_SR_SLA_ACK:
             // The device is now a slave receiver
@@ -38,13 +41,13 @@ ISR(TWI_vect){
             if(!slave_has_register_set){
                 buffer_address = TWDR;
 
-                if (buffer_address >= RX_BUFFER_SIZE){ // address out of bounds dont ack
-                    ack = 0;
-                    buffer_address = 0;
+                if (buffer_address >= I2C_SLAVE_REG_COUNT) {  // address out of bounds dont ack
+                  ack            = 0;
+                  buffer_address = 0;
                 }
                 slave_has_register_set = true; // address has been receaved now fill in buffer
             } else {
-                rxbuffer[buffer_address] = TWDR;
+                i2c_slave_reg[buffer_address] = TWDR;
                 buffer_address++;
             }
             break;
@@ -52,7 +55,7 @@ ISR(TWI_vect){
         case TW_ST_SLA_ACK:
         case TW_ST_DATA_ACK:
             // This device is a slave transmitter and master has requested data
-            TWDR = txbuffer[buffer_address];
+            TWDR = i2c_slave_reg[buffer_address];
             buffer_address++;
             break;
 
@@ -63,6 +66,6 @@ ISR(TWI_vect){
             break;
     }
 
-    // Reset i2c state mahcine to be ready for next interrupt
+    // Reset i2c state machine to be ready for next interrupt
     TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN);
 }

drivers/avr/i2c_slave.h

@@ -8,16 +8,11 @@
 #ifndef I2C_SLAVE_H
 #define I2C_SLAVE_H
 
-#define TX_BUFFER_SIZE 30
-#define RX_BUFFER_SIZE 30
+#define I2C_SLAVE_REG_COUNT 30
 
-volatile uint8_t buffer_address;
-static volatile bool slave_has_register_set = false;
-volatile uint8_t txbuffer[TX_BUFFER_SIZE];
-volatile uint8_t rxbuffer[RX_BUFFER_SIZE];
+extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
 
-void i2c_init(uint8_t address);
-void i2c_stop(void);
-ISR(TWI_vect);
+void i2c_slave_init(uint8_t address);
+void i2c_slave_stop(void);
 
 #endif // I2C_SLAVE_H

drivers/avr/ws2812.c

@@ -128,11 +128,11 @@ unsigned char I2C_Write(unsigned char c)
         c <<= 1;
     }
 
-    
+
     I2C_WriteBit(0);
     _delay_us(I2C_DELAY);
     _delay_us(I2C_DELAY);
-  
+
     // _delay_us(I2C_DELAY);
     //return I2C_ReadBit();
     return 0;

keyboards/1upkeyboards/1up60hse/config.h

@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/1upkeyboards/1up60rgb/config.h

@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/1upkeyboards/sweet16/config.h

@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN B1
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/1upkeyboards/sweet16/keymaps/switchtester/keymap.c

@@ -0,0 +1,31 @@
+#include QMK_KEYBOARD_H
+#include "switches.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  LAYOUT_ortho_4x4(
+    KC_NO, KC_NO, KC_NO, KC_NO, 
+    KC_NO, KC_NO, KC_NO, KC_NO, 
+    KC_NO, KC_NO, KC_NO, KC_NO, 
+    KC_NO, KC_NO, KC_NO, KC_NO 
+  )
+};
+
+struct mechswitch switches[MATRIX_ROWS][MATRIX_COLS] = {
+  {CHERRY_MX_BLUE, CHERRY_MX_RED, CHERRY_MX_BLACK, CHERRY_MX_BROWN},
+  {GATERON_BLUE, GATERON_RED, GATERON_BLACK, GATERON_BROWN},
+  {KAILH_BLUE, KAILH_RED, KAILH_BLACK, KAILH_BROWN},
+  {HAKO_CLEAR, HAKO_TRUE, HAKO_VIOLET, HAKO_ROYAL_TRUE}
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  uint8_t col = record->event.key.col;
+  uint8_t row = record->event.key.row;
+
+  if (record->event.pressed) {
+    char name[MAX_SWITCH_NAME_LENGTH];
+    switch_name(switches[row][col], name);
+    send_string(name);
+    SEND_STRING("\n");
+  }
+  return false;
+}

keyboards/1upkeyboards/sweet16/keymaps/switchtester/readme.md

@@ -0,0 +1,5 @@
+# Sweet16 as a switch tester
+
+This keymap uses the Sweet16 as a switch tester. The functionality outputs the switch name of whatever key the user pressed.
+
+the `switches` two-dimensional (4x4) array contains the switches attached to the macropad. The switches supported are defined as macros in the `switches.h` header file.

keyboards/1upkeyboards/sweet16/keymaps/switchtester/rules.mk

@@ -0,0 +1,12 @@
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
+CONSOLE_ENABLE = yes   # Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+NKRO_ENABLE = no       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no
+
+SRC += switches.c

keyboards/1upkeyboards/sweet16/keymaps/switchtester/switches.c

@@ -0,0 +1,99 @@
+#include <stdio.h>
+#include <string.h>
+#include "switches.h"
+
+static const char *BRAND_NAMES[] = {
+  "Kailh",
+  "Kailh Low Profile Choc",
+  "Gateron",
+  "Cherry MX",
+  "Cherry ML",
+  "Outemu",
+  "Greetech",
+  "Varmilo",
+  "MOD",
+  "Hako"
+};
+
+static const char *COLOR_NAMES[] = {
+  "",
+  "White",
+  "Black",
+  "Blue",
+  "Red",
+  "Yellow",
+  "Brown",
+  "Green",
+  "Clear",
+  "Silver",
+  "Nature White",
+  "Grey",
+  "Jade",
+  "Navy",
+  "Burnt Orange",
+  "Pale Blue",
+  "Dark Yellow",
+  "Gold",
+  "Chocolate White",
+  "Burgundy",
+  "Purple",
+  "Light Green",
+  "True",
+  "Berry",
+  "Plum",
+  "Sage",
+  "Violet",
+  "L",
+  "M",
+  "H",
+  "SH"
+};
+
+static const char *VARIANT_NAMES[] = {
+  "",
+  "BOX",
+  "BOX Thick",
+  "BOX Heavy",
+  "Silent",
+  "Tactile",
+  "Linear",
+  "Speed",
+  "Speed Heavy",
+  "Speed Thick Click",
+  "Pro",
+  "Pro Heavy",
+  "Royal",
+  "Thick Click",
+  "Heavy"
+};
+
+const char *brand_name(struct mechswitch ms) {
+  return BRAND_NAMES[ms.brand - 1];
+}
+
+const char *variant_name(struct mechswitch ms) {
+  return VARIANT_NAMES[ms.variant];
+}
+
+const char *color_name(struct mechswitch ms) {
+  return COLOR_NAMES[ms.color];
+}
+
+void switch_name(struct mechswitch ms, char *buf) {
+  const char *v_name = variant_name(ms);
+  const char *c_name = color_name(ms);
+
+  snprintf(buf, MAX_SWITCH_NAME_LENGTH, "%s", brand_name(ms));
+  strncat(buf, " ", MAX_SWITCH_NAME_LENGTH - strlen(buf));
+  if (strlen(v_name) > 0) {
+    strncat(buf, v_name, MAX_SWITCH_NAME_LENGTH - strlen(buf));
+    strncat(buf, " ", MAX_SWITCH_NAME_LENGTH - strlen(buf));
+  }
+  if (strlen(c_name) > 0) {
+    strncat(buf, c_name, MAX_SWITCH_NAME_LENGTH - strlen(buf));
+  }
+}
+
+int bitfieldtoi(struct mechswitch ms) {
+  return ((ms.brand << 9) | (ms.variant << 5) | ms.color);
+}

keyboards/1upkeyboards/sweet16/keymaps/switchtester/switches.h

@@ -0,0 +1,189 @@
+#pragma once
+
+struct mechswitch
+{
+  unsigned int brand: 4;
+  unsigned int variant: 4;
+  unsigned int color: 5;
+};
+
+#define MAX_SWITCH_NAME_LENGTH 256
+
+#define BRAND_KAILH     1
+#define BRAND_KAILH_LOW 2
+#define BRAND_GATERON   3
+#define BRAND_CHERRY_MX 4
+#define BRAND_CHERRY_ML 5
+#define BRAND_OUTEMU    6
+#define BRAND_GREETECH  7
+#define BRAND_VARMILO   8
+#define BRAND_MOD       9
+#define BRAND_HAKO      10
+
+#define COLOR_NO 0
+#define COLOR_WHITE 1
+#define COLOR_BLACK 2
+#define COLOR_BLUE 3
+#define COLOR_RED 4
+#define COLOR_YELLOW 5
+#define COLOR_BROWN 6
+#define COLOR_GREEN 7
+#define COLOR_CLEAR 8
+#define COLOR_SILVER 9
+#define COLOR_NATURE_WHITE 10
+#define COLOR_GREY 11
+#define COLOR_JADE 12
+#define COLOR_NAVY 13
+#define COLOR_BURNT_ORANGE 14
+#define COLOR_PALE_BLUE 15
+#define COLOR_DARK_YELLOW 16
+#define COLOR_GOLD 17
+#define COLOR_CHOCOLATE_WHITE 18
+#define COLOR_BURGUNDY 19
+#define COLOR_PURPLE 20
+#define COLOR_LIGHT_GREEN 21
+#define COLOR_TRUE 22
+#define COLOR_BERRY 23
+#define COLOR_PLUM 24
+#define COLOR_SAGE 25
+#define COLOR_VIOLET 26
+#define COLOR_L 27
+#define COLOR_M 28
+#define COLOR_H 29
+#define COLOR_SH 30
+
+#define VARIANT_NO          0
+#define VARIANT_BOX         1
+#define VARIANT_BOX_THICK   2
+#define VARIANT_BOX_HEAVY   3
+#define VARIANT_SILENT      4
+#define VARIANT_TACTILE     5
+#define VARIANT_LINEAR      6
+#define VARIANT_SPEED       7
+#define VARIANT_SPEED_HEAVY 8
+#define VARIANT_SPEED_CLICK_THICK 9
+#define VARIANT_PRO         10
+#define VARIANT_PRO_HEAVY   11
+#define VARIANT_ROYAL       12
+#define VARIANT_CLICK_THICK 13
+
+#define CHERRY_MX_BLUE {BRAND_CHERRY_MX, VARIANT_NO, COLOR_BLUE}
+#define CHERRY_MX_RED {BRAND_CHERRY_MX, VARIANT_NO, COLOR_RED}
+#define CHERRY_MX_BROWN {BRAND_CHERRY_MX, VARIANT_NO, COLOR_BROWN}
+#define CHERRY_MX_BLACK {BRAND_CHERRY_MX, VARIANT_NO, COLOR_BLACK}
+#define CHERRY_MX_GREEN {BRAND_CHERRY_MX, VARIANT_NO, COLOR_GREEN}
+#define CHERRY_MX_CLEAR {BRAND_CHERRY_MX, VARIANT_NO, COLOR_CLEAR}
+#define CHERRY_MX_WHITE {BRAND_CHERRY_MX, VARIANT_NO, COLOR_WHITE}
+#define CHERRY_MX_SILVER {BRAND_CHERRY_MX, VARIANT_NO, COLOR_SILVER}
+#define CHERRY_MX_NATURE_WHITE {BRAND_CHERRY_MX, VARIANT_NO, COLOR_NATURE_WHITE}
+#define CHERRY_MX_SILENT_BLACK {BRAND_CHERRY_MX, VARIANT_SILENT, COLOR_BLACK}
+#define CHERRY_MX_SILENT_RED {BRAND_CHERRY_MX, VARIANT_SILENT, COLOR_RED}
+#define CHERRY_MX_TACTILE_BLACK {BRAND_CHERRY_MX, VARIANT_SILENT, COLOR_GREY}
+#define CHERRY_MX_LINEAR_BLACK {BRAND_CHERRY_MX, VARIANT_LINEAR, COLOR_GREY}
+
+#define CHERRY_ML {BRAND_CHERRY_ML, VARIANT_NO, COLOR_NO}
+
+#define GATERON_BLUE {BRAND_GATERON, VARIANT_NO, COLOR_BLUE}
+#define GATERON_BROWN {BRAND_GATERON, VARIANT_NO, COLOR_BROWN}
+#define GATERON_BLACK {BRAND_GATERON, VARIANT_NO, COLOR_BLACK}
+#define GATERON_RED {BRAND_GATERON, VARIANT_NO, COLOR_RED}
+#define GATERON_CLEAR {BRAND_GATERON, VARIANT_NO, COLOR_CLEAR}
+#define GATERON_GREEN {BRAND_GATERON, VARIANT_NO, COLOR_GREEN}
+#define GATERON_YELLOW {BRAND_GATERON, VARIANT_NO, COLOR_YELLOW}
+
+#define GATERON_SILENT_CLEAR {BRAND_GATERON, VARIANT_SILENT, COLOR_CLEAR}
+#define GATERON_SILENT_RED {BRAND_GATERON, VARIANT_SILENT, COLOR_RED}
+#define GATERON_SILENT_YELLOW {BRAND_GATERON, VARIANT_SILENT, COLOR_YELLOW}
+#define GATERON_SILENT_BLACK {BRAND_GATERON, VARIANT_SILENT, COLOR_BLACK}
+#define GATERON_SILENT_BROWN {BRAND_GATERON, VARIANT_SILENT, COLOR_BROWN}
+
+#define GREETECH_BLUE {BRAND_GREETECH, VARIANT_NO, COLOR_BLUE}
+#define GREETECH_BROWN {BRAND_GREETECH, VARIANT_NO, COLOR_BROWN}
+#define GREETECH_BLACK {BRAND_GREETECH, VARIANT_NO, COLOR_BLACK}
+#define GREETECH_RED {BRAND_GREETECH, VARIANT_NO, COLOR_RED}
+
+#define OUTEMU_BLUE {BRAND_OUTEMU, VARIANT_NO, COLOR_BLUE}
+#define OUTEMU_BROWN {BRAND_OUTEMU, VARIANT_NO, COLOR_BROWN}
+#define OUTEMU_BLACK {BRAND_OUTEMU, VARIANT_NO, COLOR_BLACK}
+#define OUTEMU_RED {BRAND_OUTEMU, VARIANT_NO, COLOR_RED}
+
+#define KAILH_BLUE {BRAND_KAILH, VARIANT_NO, COLOR_BLUE}
+#define KAILH_BROWN {BRAND_KAILH, VARIANT_NO, COLOR_BROWN}
+#define KAILH_BLACK {BRAND_KAILH, VARIANT_NO, COLOR_BLACK}
+#define KAILH_RED {BRAND_KAILH, VARIANT_NO, COLOR_RED}
+#define KAILH_GREEN {BRAND_KAILH, VARIANT_NO, COLOR_GREEN}
+
+#define KAILH_BOX_WHITE {BRAND_KAILH, VARIANT_BOX, COLOR_WHITE}
+#define KAILH_BOX_RED {BRAND_KAILH, VARIANT_BOX, COLOR_RED}
+#define KAILH_BOX_BLACK {BRAND_KAILH, VARIANT_BOX, COLOR_BLACK}
+#define KAILH_BOX_BROWN {BRAND_KAILH, VARIANT_BOX, COLOR_BROWN}
+#define KAILH_BOX_ROYAL {BRAND_KAILH, VARIANT_BOX, COLOR_ROYAL}
+
+#define KAILH_BOX_THICK_JADE {BRAND_KAILH, VARIANT_BOX_THICK, COLOR_JADE}
+#define KAILH_BOX_THICK_NAVY {BRAND_KAILH, VARIANT_BOX_THICK, COLOR_NAVY}
+#define KAILH_BOX_HEAVY_BURNT_ORANGE {BRAND_KAILH, VARIANT_BOX_HEAVY, COLOR_BURNT_ORANGE}
+#define KAILH_BOX_HEAVY_PALE_BLUE {BRAND_KAILH, VARIANT_BOX_HEAVY, COLOR_PALE_BLUE}
+#define KAILH_BOX_HEAVY_DARK_YELLOW {BRAND_KAILH, VARIANT_BOX_HEAVY, COLOR_DARK_YELLOW}
+
+#define KAILH_SPEED_BRONZE {BRAND_KAILH, VARIANT_SPEED, COLOR_BRONZE}
+#define KAILH_SPEED_COPPER {BRAND_KAILH, VARIANT_SPEED, COLOR_COPPER}
+#define KAILH_SPEED_GOLD {BRAND_KAILH, VARIANT_SPEED, COLOR_GOLD}
+#define KAILH_SPEED_SILVER {BRAND_KAILH, VARIANT_SPEED, COLOR_SILVER}
+
+#define KAILH_SPEED_HEAVY_BURNT_ORANGE {BRAND_KAILH, VARIANT_SPEED_HEAVY, COLOR_BURNT_ORANGE}
+#define KAILH_SPEED_HEAVY_PALE_BLUE {BRAND_KAILH, VARIANT_SPEED_HEAVY, COLOR_PALE_BLUE}
+#define KAILH_SPEED_HEAVY_DARK_YELLOW {BRAND_KAILH, VARIANT_SPEED_HEAVY, COLOR_DARK_YELLOW}
+
+#define KAILH_SPEED_THICK_CLICK_NAVY {BRAND_KAILH, VARIANT_SPEED_CLICK_THICK, COLOR_NAVY}
+
+#define KAILH_PRO_BURGUNDY {BRAND_KAILH, VARIANT_PRO, COLOR_BURGUNDY}
+#define KAILH_PRO_PURPLE {BRAND_KAILH, VARIANT_PRO, COLOR_PURPLE}
+#define KAILH_PRO_LIGHT_GREEN {BRAND_KAILH, VARIANT_PRO, COLOR_LIGHT_GREEN}
+
+#define KAILH_PRO_HEAVY_BERRY {BRAND_KAILH, VARIANT_PRO_HEAVY, COLOR_BERRY}
+#define KAILH_PRO_HEAVY_PLUM {BRAND_KAILH, VARIANT_PRO_HEAVY, COLOR_PLUM}
+#define KAILH_PRO_GEAVY_SAGE {BRAND_KAILH, VARIANT_PRO_HEAVY, COLOR_SAGE}
+
+#define KAILH_LOW_WHITE {BRAND_KAILH_LOW, VARIANT_NO, COLOR_WHITE}
+#define KAILH_LOW_BROWN {BRAND_KAILH_LOW, VARIANT_NO, COLOR_BROWN}
+#define KAILH_LOW_RED {BRAND_KAILH_LOW, VARIANT_NO, COLOR_RED}
+#define KAILH_LOW_CHOCOLATE_WHITE {BRAND_KAILH_LOW, VARIANT_NO, COLOR_CHOCOLATE_WHITE}
+#define KAILH_LOW_THICK_CLICK_NAVY {BRAND_KAILH_LOW, VARIANT_THICK_CLICK, COLOR_NAVY}
+#define KAILH_LOW_THICK_CLICK_JADE {BRAND_KAILH_LOW, VARIANT_THICK_CLICK, COLOR_JADE}
+#define KAILH_LOW_HEAVY_DARK_YELLOW {BRAND_KAILH_LOW, VARIANT_HEAVY, COLOR_DARK_YELLOW}
+#define KAILH_LOW_HEAVY_BURNT_ORANGE {BRAND_KAILH_LOW, VARIANT_HEAVY, COLOR_BURNT_ORANGE}
+#define KAILH_LOW_HEAVY_PALE_BLUE {BRAND_KAILH_LOW, VARIANT_HEAVY, COLOR_PALE_BLUE}
+
+#define HAKO_ROYAL_CLEAR {BRAND_HAKO, VARIANT_ROYAL, COLOR_CLEAR}
+#define HAKO_ROYAL_TRUE {BRAND_HAKO, VARIANT_ROYAL, COLOR_TRUE}
+
+#define HAKO_CLEAR {BRAND_HAKO, VARIANT_NO, COLOR_CLEAR}
+#define HAKO_TRUE {BRAND_HAKO, VARIANT_NO, COLOR_TRUE}
+#define HAKO_VIOLET {BRAND_HAKO, VARIANT_NO, COLOR_VIOLET}
+
+#define MOD_L_TACTILE {BRAND_MOD, VARIANT_TACTILE, COLOR_L}
+#define MOD_M_TACTILE {BRAND_MOD, VARIANT_TACTILE, COLOR_M}
+#define MOD_H_TACTILE {BRAND_MOD, VARIANT_TACTILE, COLOR_H}
+#define MOD_SH_TACTILE {BRAND_MOD, VARIANT_TACTILE, COLOR_SH}
+
+#define MOD_L_LINEAR {BRAND_MOD, VARIANT_LINEAR, COLOR_L}
+#define MOD_M_LINEAR {BRAND_MOD, VARIANT_LINEAR, COLOR_M}
+#define MOD_H_LINEAR {BRAND_MOD, VARIANT_LINEAR, COLOR_H}
+
+#define BYTE_TO_BINARY_PATTERN "%c%c%c%c%c%c%c%c"
+#define BYTE_TO_BINARY(byte)  \
+  (byte & 0x80 ? '1' : '0'), \
+  (byte & 0x40 ? '1' : '0'), \
+  (byte & 0x20 ? '1' : '0'), \
+  (byte & 0x10 ? '1' : '0'), \
+  (byte & 0x08 ? '1' : '0'), \
+  (byte & 0x04 ? '1' : '0'), \
+  (byte & 0x02 ? '1' : '0'), \
+  (byte & 0x01 ? '1' : '0') 
+
+
+const char *brand_name(struct mechswitch ms);
+const char *variant_name(struct mechswitch ms);
+const char *color_name(struct mechswitch ms);
+void switch_name(struct mechswitch ms, char *buf);
+int bitfieldtoi(struct mechswitch ms);

keyboards/30wer/config.h

@@ -22,10 +22,5 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* prevent stuck modifiers */
 #define PREVENT_STUCK_MODIFIERS

keyboards/40percentclub/25/config.h

@@ -121,11 +121,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/4x4/config.h

@@ -30,7 +30,6 @@
 #define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
 #define UNUSED_PINS
 
-
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
@@ -38,7 +37,6 @@
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -90,11 +88,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -199,4 +192,3 @@
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/40percentclub/5x5/config.h

@@ -97,11 +97,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/6lit/config.h

@@ -122,11 +122,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/foobar/config.h

@@ -122,11 +122,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/gherkin/config.h

@@ -37,11 +37,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0

keyboards/40percentclub/i75/config.h

@@ -77,11 +77,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/luddite/config.h

@@ -34,11 +34,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B4
 #define RGBLIGHT_ANIMATIONS

keyboards/40percentclub/luddite/info.json

@@ -1,12 +1,74 @@
 {
-    "keyboard_name": "foobar",
-    "url": "",
-    "maintainer": "qmk",
-    "width": 15,
-    "height": 5,
-    "layouts": {
-      "LAYOUT_60_ansi": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
-      }
+  "keyboard_name": "Luddite",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_60_ansi": {
+      "layout": [
+        {"label":"`", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"6", "x":6, "y":0},
+        {"label":"7", "x":7, "y":0},
+        {"label":"8", "x":8, "y":0},
+        {"label":"9", "x":9, "y":0},
+        {"label":"0", "x":10, "y":0},
+        {"label":"-", "x":11, "y":0},
+        {"label":"=", "x":12, "y":0},
+        {"label":"Backspace", "x":13, "y":0, "w":2},
+        {"label":"Tab", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+        {"label":"Y", "x":6.5, "y":1},
+        {"label":"U", "x":7.5, "y":1},
+        {"label":"I", "x":8.5, "y":1},
+        {"label":"O", "x":9.5, "y":1},
+        {"label":"P", "x":10.5, "y":1},
+        {"label":"[", "x":11.5, "y":1},
+        {"label":"]", "x":12.5, "y":1},
+        {"label":"\\", "x":13.5, "y":1, "w":1.5},
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+        {"label":"H", "x":6.75, "y":2},
+        {"label":"J", "x":7.75, "y":2},
+        {"label":"K", "x":8.75, "y":2},
+        {"label":"L", "x":9.75, "y":2},
+        {"label":";", "x":10.75, "y":2},
+        {"label":"'", "x":11.75, "y":2},
+        {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+        {"label":"Shift", "x":0, "y":3, "w":2.25},
+        {"label":"Z", "x":2.25, "y":3},
+        {"label":"X", "x":3.25, "y":3},
+        {"label":"C", "x":4.25, "y":3},
+        {"label":"V", "x":5.25, "y":3},
+        {"label":"B", "x":6.25, "y":3},
+        {"label":"N", "x":7.25, "y":3},
+        {"label":"M", "x":8.25, "y":3},
+        {"label":",", "x":9.25, "y":3},
+        {"label":".", "x":10.25, "y":3},
+        {"label":"/", "x":11.25, "y":3},
+        {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+        {"label":"GUI", "x":1.25, "y":4, "w":1.25},
+        {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+        {"label":"Space", "x":3.75, "y":4, "w":6.25},
+        {"label":"Alt", "x":10, "y":4, "w":1.25},
+        {"label":"GUI", "x":11.25, "y":4, "w":1.25},
+        {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+        {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+      ]
     }
+  }
 }

keyboards/40percentclub/mf68/config.h

@@ -52,7 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -99,11 +98,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/mf68_ble/config.h

@@ -99,11 +99,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/nori/config.h

@@ -110,11 +110,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/tomato/config.h

@@ -28,11 +28,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* eliminate lag on space cadet mods */
 #define PERMISSIVE_HOLD
 

keyboards/40percentclub/ut47/config.h

@@ -53,11 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Enable GNAP matrix serial output */
 #define GNAP_ENABLE
 

keyboards/40percentclub/ut47/readme.md

@@ -33,7 +33,7 @@ Go to the [default layout README](keymaps/default/readme.md) for more informatio
 
 Credit: Forked from [di0ib TMK version](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gnap)
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
 
 ### Build Guide
 

keyboards/412_64/config.h

@@ -30,7 +30,6 @@
 #define MATRIX_COL_PINS { B0, D2, D0, D1, D4, C6, D7, E6 }
 #define UNUSED_PINS { B4, B5, B6, B7, C7, F0, F1 }
 
-
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
@@ -38,7 +37,6 @@
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -90,11 +88,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -199,4 +192,3 @@
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/412_64/keymaps/default/keymap.c

@@ -71,12 +71,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
   keyevent_t event = record->event;
     (void)event;

keyboards/6ball/readme.md

@@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make 6ball:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/9key/readme.md

@@ -14,4 +14,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make 9key:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/acr60/config.h

@@ -36,11 +36,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 20

keyboards/acr60/readme.md

@@ -15,4 +15,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make acr60:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/ai03/README.md

@@ -0,0 +1,4 @@
+# ai03
+QMK folders for PCB commissions.
+
+Website: [ai03 Keyboard Designs](https://kb.ai03.me/)

keyboards/ai03/lunar/config.h

@@ -0,0 +1,266 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA103
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Switchplate Peripherals
+#define PRODUCT         Lunar
+#define DESCRIPTION     65% AEK keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
+
+/* VIA Configurator Compatibility */
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR = DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635
+// DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE = 1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389   
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/ai03/lunar/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Lunar", 
+    "url": "https://geekhack.org/index.php?topic=96112.0", 
+    "maintainer": "ai03", 
+    "bootloader": "", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":2.25}, {"x":6.5, "y":4, "w":1.5}, {"x":8, "y":4, "w":2.75}, {"label":"Alt", "x":10.75, "y":4, "w":1.25}, {"label":"Win", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        }
+    }
+}

keyboards/ai03/lunar/keymaps/default/keymap.c

@@ -0,0 +1,90 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  MANUAL = SAFE_RANGE,
+  SWPLURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	
+	/*
+	
+	Layout
+	
+	K000 K001 K002 K003 K004 K005 K006 K007 K008 K009 K010 K011 K012 K013 K212 K014
+	K100  K101  K102 K103 K104 K105 K106 K107 K108 K109 K110 K111   K112  K113 K114
+	K200    K201 K202 K203 K204 K205 K206 K207 K208 K209 K210 K211     K213    K214
+	K300      K301 K302 K303 K304 K305 K306 K307 K308 K309 K310 K311    K313   K314
+	K400 K401 K402        K403       K405       K407       K409 K410 K411 K413 K414
+	
+	K212 = Split backspace (bound to Del by default)
+	K403, K407 = Split space (bound to space by default)
+	K405 = Main space
+	
+	*/
+	
+	[0] = LAYOUT( /* Base */
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME, 
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_END, 
+		MO(1),            KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP, 
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_PGDN, 
+		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    MO(1),   KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+	[1] = LAYOUT( /* FN */
+		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  MANUAL, 
+		KC_CAPS,          _______, KC_UP,   _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_MPRV, KC_MPLY, KC_MNXT, _______, SWPLURL, 
+		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4,   KC_P5,   KC_P6,   _______, _______,          _______, _______, 
+		_______,          KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0,   KC_P1,   KC_P2,   KC_P3,   _______, _______,          KC_PGUP, _______, 
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
+	)
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case MANUAL:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("https://kb.ai03.me/redir/lunar/index.html");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case SWPLURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://switchplate.co/collections/lunar-group-buy");
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/ai03/lunar/keymaps/default/readme.md

@@ -0,0 +1,2 @@
+# The default keymap for Lunar
+For use without VIA configurator.

keyboards/ai03/lunar/keymaps/via/keymap.c

@@ -0,0 +1,64 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	
+	/*
+	
+	Layout
+	
+	K000 K001 K002 K003 K004 K005 K006 K007 K008 K009 K010 K011 K012 K013 K212 K014
+	K100  K101  K102 K103 K104 K105 K106 K107 K108 K109 K110 K111   K112  K113 K114
+	K200    K201 K202 K203 K204 K205 K206 K207 K208 K209 K210 K211     K213    K214
+	K300      K301 K302 K303 K304 K305 K306 K307 K308 K309 K310 K311    K313   K314
+	K400 K401 K402        K403       K405       K407       K409 K410 K411 K413 K414
+	
+	K212 = Split backspace (bound to Del by default)
+	K403, K407 = Split space (bound to space by default)
+	K405 = Main space
+	
+	*/
+	
+	[0] = LAYOUT( /* Base */
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME, 
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_END, 
+		MO(1),            KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP, 
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_PGDN, 
+		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    MO(1),   KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+	[1] = LAYOUT( /* FN */
+		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  _______, 
+		KC_CAPS,          _______, KC_UP,   _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, 
+		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4,   KC_P5,   KC_P6,   _______, _______,          _______, _______, 
+		_______,          KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0,   KC_P1,   KC_P2,   KC_P3,   _______, _______,          KC_PGUP, _______, 
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
+	),
+	[2] = LAYOUT( /* Blank. For VIA compatibility */
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______, _______
+	),
+	[3] = LAYOUT( /* Blank. For VIA compatibility */
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______, _______
+	)
+};

keyboards/ai03/lunar/keymaps/via/readme.md

@@ -0,0 +1,2 @@
+# The VIA keymap for Lunar
+This keymap is for compatibility with the VIA configurator.

keyboards/ai03/lunar/keymaps/via/rules.mk

@@ -0,0 +1,86 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+SRC += keyboards/wilba_tech/wt_main.c
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes

keyboards/ai03/lunar/lunar.c

@@ -0,0 +1,22 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "lunar.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/ai03/lunar/lunar.h

@@ -0,0 +1,41 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, K014, \
+	K100,       K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K213, K214, \
+	K300,       K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+	K400, K401, K402,       K403,       K405,       K407,             K409, K410, K411, K413, K414  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ K400,  K401,  K402,  K403,  KC_NO, K405,  KC_NO, K407,  KC_NO, K409,  K410,  K411,  KC_NO, K413,  K414 }  \
+}

keyboards/ai03/lunar/readme.md

@@ -0,0 +1,15 @@
+# Lunar
+
+![Photo](https://i.imgur.com/hYoW8IJ.jpg)  
+
+A 65% keyboard made specifically for Alps SKCM/L switches and AEK/M0116 keycaps.
+
+Keyboard Maintainer: [ai03](https://github.com/ai03-2725)  
+Hardware Supported: Official Lunar PCB  
+Hardware Availability: [Switchplate Peripherals](https://switchplate.co/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ai03/lunar:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ai03/lunar/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/al1/config.h

@@ -50,7 +50,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -102,11 +101,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/al1/keymaps/splitbs/keymap.c

@@ -15,10 +15,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_TRNS,  KC_RGUI,  KC_RCTRL,                                         BL_TOGG,  BL_DEC,  BL_INC, KC_P0,    KC_PDOT         ),
 };
 
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
   // MACRODOWN only works in this function

keyboards/al1/readme.md

@@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment):
     make al1:default
     make al1:splitbs
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/alf/dc60/config.h

@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/alf/dc60/dc60.h

@@ -24,19 +24,19 @@
 // layout of the board and position of the keys
 // The second converts the arguments into a two-dimensional array which
 // represents the switch matrix.
-#define LAYOUT( \
+#define LAYOUT_all( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KOD, KOE, \
     K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
     K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
     K40,      K42, K43,      K45,      K47, K48,      K4A, K4B, K4C, K4D, K4E  \
 ) \
 { \
-    { K00, K01,   K02, K03, K04,   K05, K06,   K07, K08, K09,   K0A, K0B, K0C,   KOD, KOE },   \
-    { K10, KC_NO, K12, K13, K14,   K15, K16,   K17, K18, K19,   K1A, K1B, K1C,   K1D, K1E },   \
-    { K20, KC_NO, K22, K23, K24,   K25, K26,   K27, K28, K29,   K2A, K2B, K2C,   K2D, KC_NO }, \
-    { K30, K31,   K32, K33, K34,   K35, K36,   K37, K38, K39,   K3A, K3B, KC_NO, K3D, K3E },   \
-    { K40, KC_NO, K42, K43, KC_NO, K45, KC_NO, K47, K48, KC_NO, K4A, K4B, K4C,   K4D, K4E },   \
+    { K00, K01,   K02, K03, K04,   K05, K06,   K07, K08, K09,   K0A, K0B, K0C, KOD, KOE },   \
+    { K10, KC_NO, K12, K13, K14,   K15, K16,   K17, K18, K19,   K1A, K1B, K1C, K1D, K1E },   \
+    { K20, KC_NO, K22, K23, K24,   K25, K26,   K27, K28, K29,   K2A, K2B, K2C, K2D, KC_NO }, \
+    { K30, K31,   K32, K33, K34,   K35, K36,   K37, K38, K39,   K3A, K3B, K3C, K3D, K3E },   \
+    { K40, KC_NO, K42, K43, KC_NO, K45, KC_NO, K47, K48, KC_NO, K4A, K4B, K4C, K4D, K4E },   \
 }
 
 #endif

keyboards/alf/dc60/info.json

@@ -2,11 +2,12 @@
     "keyboard_name": "dc60", 
     "url": "", 
     "maintainer": "qmk", 
+    "bootloader": "", 
     "width": 15, 
     "height": 5, 
     "layouts": {
-        "LAYOUT": {
-            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}]
         }
     }
 }

keyboards/alf/dc60/keymaps/default/keymap.c

@@ -16,27 +16,23 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT(
+  [0] = LAYOUT_all(
       KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,     KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,
       KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,     KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
       KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,     KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-      KC_LSFT, KC_NO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,     KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_NO,
-      KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPACE, KC_SPACE, KC_SPACE,   KC_RALT, MO(1),             KC_RGUI, KC_RGUI, KC_RCTL
+      KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,     KC_B,   KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   MO(1),
+      KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPACE, KC_SPACE, KC_SPACE,      KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RIGHT
       ),
 
-  [1] = LAYOUT(
+  [1] = LAYOUT_all(
       KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,
+      KC_TRNS, KC_LSFT, KC_TRNS, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS, KC_TRNS, KC_TRNS
       ),
 };
 
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
   // MACRODOWN only works in this function

keyboards/alf/x2/config.h

@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/alice/alice.c

@@ -0,0 +1,55 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <string.h>
+
+#include "rgblight.h"
+
+#include "i2c_master.h"
+#include "quantum.h"
+
+#ifdef RGBLIGHT_ENABLE
+extern rgblight_config_t rgblight_config;
+
+void matrix_init_kb(void) {
+  i2c_init();
+  // call user level keymaps, if any
+  matrix_init_user();
+}
+
+// custom RGB driver
+void rgblight_set(void) {
+  if (!rgblight_config.enable) {
+    memset(led, 0, 3 * RGBLED_NUM);
+  }
+
+  i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+}
+
+bool rgb_init = false;
+
+void matrix_scan_kb(void) {
+  // if LEDs were previously on before poweroff, turn them back on
+  if (rgb_init == false && rgblight_config.enable) {
+    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+    rgb_init = true;
+  }
+
+  rgblight_task();
+  matrix_scan_user();
+}
+#endif

keyboards/alice/alice.h

@@ -0,0 +1,50 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* LAYOUT
+ * ┌───┐ ┌───┬───┬───┬───┬───┬───┬───┐         ┌───┬───┬───┬───┬───┬───┬───┬───┐
+ * │63 │ │00 │01 │02 │03 │04 │05 │06 │         │07 │08 │09 │10 │11 │12 │13 │14 │
+ * ├───┤ ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┘       ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │64 │ │15   │16 │17 │18 │19 │20 │         │21 │22 │23 │24 │25 │26 │27 │28   │
+ * ├───┤ ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┐        └┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │65 │ │29    │30 │31 │32 │33 │34 │         │35 │36 │37 │38 │39 │40 │41      │
+ * └───┘ ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┐     ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ *       │42      │43 │44 │45 │46 │47 │     │48 │49 │50 │51 │52 │53 │54    │55 │
+ *       ├─────┬──┴──┬┴───┴┬──┴───┴┬──┴─┐   ├───┴───┴──┬┴───┴┬──┴───┴────┬─┴───┤
+ *       │56   │     │57   │58     │59  │   │60        │61   │           │62   │
+ *       └─────┘     └─────┴───────┴────┘   └──────────┴─────┘           └─────┘
+ */
+#define LAYOUT( \
+  K63,   K00, K01, K02, K03, K04, K05, K06,      K07, K08, K09, K10, K11, K12, K13, K14, \
+  K64,   K15, K16, K17, K18, K19, K20,      K21, K22, K23, K24, K25, K26, K27, K28,      \
+  K65,   K29, K30, K31, K32, K33, K34,      K35, K36, K37, K38, K39, K40,      K41,      \
+         K42, K43, K44, K45, K46, K47,      K48, K49, K50, K51, K52, K53, K54, K55,      \
+         K56,      K57,      K58, K59,           K60,      K61,                K62       \
+) \
+{ \
+  { K00  , K01  , K02  , K03  , K04  , K05  , K06  , K07  , K08  , K09  , K10  , K11  , K12  , K13  , K14   }, \
+  { K15  , K16  , K17  , K18  , K19  , K20  , K21  , K22  , K23  , K24  , K25  , K26  , K27  , K28  , KC_NO }, \
+  { K29  , K30  , K31  , K32  , K33  , K34  , K35  , K36  , K37  , K38  , K39  , K40  , K41  , KC_NO, KC_NO }, \
+  { K42  , K43  , K44  , K45  , K46  , K47  , K48  , K49  , K50  , K51  , K52  , K53  , K54  , K55  , KC_NO }, \
+  { K56  , K57  , K58  , K59  , KC_NO, KC_NO, K60  , K61  , K62  , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+  { K63  , K64  , K65  , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }  \
+}
+

keyboards/alice/config.h

@@ -0,0 +1,39 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422E
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER    TGR
+#define PRODUCT         TGR Alice
+
+/* matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 15
+
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1 }
+#define DIODE_DIRECTION COL2ROW
+
+#define RGBLED_NUM 20
+#define RGBLIGHT_ANIMATIONS
+
+#define NO_UART 1
+#define BOOTLOADHID_BOOTLOADER 1

keyboards/alice/info.json

@@ -0,0 +1,80 @@
+{
+  "keyboard_name": "TGR Alice",
+  "url": "",
+  "maintainer": "Felipe Coury",
+  "width": 17.75,
+  "height": 5,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 66,
+      "layout": [
+        {"label":"K63", "x":0, "y":0},
+        {"label":"K00", "x":1.25, "y":0},
+        {"label":"K01", "x":2.25, "y":0},
+        {"label":"K02", "x":3.25, "y":0},
+        {"label":"K03", "x":4.25, "y":0},
+        {"label":"K04", "x":5.25, "y":0},
+        {"label":"K05", "x":6.25, "y":0},
+        {"label":"K06", "x":7.25, "y":0},
+        {"label":"K07", "x":10.25, "y":0},
+        {"label":"K08", "x":11.25, "y":0},
+        {"label":"K09", "x":12.25, "y":0},
+        {"label":"K10", "x":13.25, "y":0},
+        {"label":"K11", "x":14.25, "y":0},
+        {"label":"K12", "x":15.25, "y":0},
+        {"label":"K13", "x":16.25, "y":0},
+        {"label":"K14", "x":17.25, "y":0},
+        {"label":"K64", "x":0, "y":1},
+        {"label":"K15", "x":1.25, "y":1, "w":1.5},
+        {"label":"K16", "x":2.75, "y":1},
+        {"label":"K17", "x":3.75, "y":1},
+        {"label":"K18", "x":4.75, "y":1},
+        {"label":"K19", "x":5.75, "y":1},
+        {"label":"K20", "x":6.75, "y":1},
+        {"label":"K21", "x":9.75, "y":1},
+        {"label":"K22", "x":10.75, "y":1},
+        {"label":"K23", "x":11.75, "y":1},
+        {"label":"K24", "x":12.75, "y":1},
+        {"label":"K25", "x":13.75, "y":1},
+        {"label":"K26", "x":14.75, "y":1},
+        {"label":"K27", "x":15.75, "y":1},
+        {"label":"K28", "x":16.75, "y":1, "w":1.5},
+        {"label":"K65", "x":0, "y":2},
+        {"label":"K29", "x":1.25, "y":2, "w":1.75},
+        {"label":"K30", "x":3, "y":2},
+        {"label":"K31", "x":4, "y":2},
+        {"label":"K32", "x":5, "y":2},
+        {"label":"K33", "x":6, "y":2},
+        {"label":"K34", "x":7, "y":2},
+        {"label":"K35", "x":10, "y":2},
+        {"label":"K36", "x":11, "y":2},
+        {"label":"K37", "x":12, "y":2},
+        {"label":"K38", "x":13, "y":2},
+        {"label":"K39", "x":14, "y":2},
+        {"label":"K40", "x":15, "y":2},
+        {"label":"K41", "x":16, "y":2, "w":2.25},
+        {"label":"K42", "x":1.25, "y":3, "w":2.25},
+        {"label":"K43", "x":3.5, "y":3},
+        {"label":"K44", "x":4.5, "y":3},
+        {"label":"K45", "x":5.5, "y":3},
+        {"label":"K46", "x":6.5, "y":3},
+        {"label":"K47", "x":7.5, "y":3},
+        {"label":"K48", "x":9.5, "y":3},
+        {"label":"K49", "x":10.5, "y":3},
+        {"label":"K50", "x":11.5, "y":3},
+        {"label":"K51", "x":12.5, "y":3},
+        {"label":"K52", "x":13.5, "y":3},
+        {"label":"K53", "x":14.5, "y":3},
+        {"label":"K54", "x":15.5, "y":3, "w":1.75},
+        {"label":"K55", "x":17.25, "y":3},
+        {"label":"K56", "x":1.25, "y":4, "w":1.5},
+        {"label":"K57", "x":4.25, "y":4, "w":1.5},
+        {"label":"K58", "x":5.75, "y":4, "w":2},
+        {"label":"K59", "x":7.75, "y":4, "w":1.25},
+        {"label":"K60", "x":9.5, "y":4, "w":2.75},
+        {"label":"K61", "x":12.25, "y":4, "w":1.5},
+        {"label":"K62", "x":16.75, "y":4, "w":1.5}
+      ]
+    }
+  }
+}

keyboards/alice/keymaps/default/keymap.c

@@ -0,0 +1,35 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,     KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
+        KC_PGUP,    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
+        KC_PGDN,    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           \
+                    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),            \
+                    KC_LGUI,          KC_LALT,          KC_SPC,  KC_LGUI,          KC_SPC,           KC_RALT,                            KC_RCTL           \
+    ),
+    [1] = LAYOUT(
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP  , _______, _______,          \
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT,          _______,          \
+                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,          \
+                    _______,          _______,          _______, _______,          _______,          _______,                            _______           \
+    ),
+};

keyboards/alice/keymaps/mrkeebs/keymap.c

@@ -0,0 +1,35 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,     KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
+        KC_PGUP,    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
+        KC_PGDN,    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           \
+                    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),            \
+                    KC_LGUI,          KC_LALT,          KC_SPC,  KC_LGUI,          KC_SPC,           KC_RALT,                            KC_RCTL           \
+    ),
+    [1] = LAYOUT(
+        RESET,      KC_GRV , KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_INS,  \
+        _______,    _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_UP  , _______, _______,          \
+        _______,    _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______,                   \
+                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,          \
+                    _______,          _______,          _______, _______,          _______,          _______,                            _______           \
+    ),
+};

keyboards/alice/program

@@ -0,0 +1,106 @@
+#!/usr/bin/env python
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>, Sebastian Kaim <sebb@sebb767.de>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+from __future__ import print_function
+
+import os
+import sys
+import time
+import usb
+
+
+def checkForKeyboardInNormalMode():
+    """Returns a device if a ps2avrGB device in normal made (that is in keyboard mode) or None if it is not found."""
+    return usb.core.find(idVendor=0x20A0, idProduct=0x422D)
+
+def checkForKeyboardInBootloaderMode():
+    """Returns True if a ps2avrGB device in bootloader (flashable) mode is found and False otherwise."""
+    return (usb.core.find(idVendor=0x16c0, idProduct=0x05df) is not None)
+
+def flashKeyboard(firmware_file):
+    """Calls bootloadHID to flash the given file to the device."""
+    print('Flashing firmware to device ...')
+    if os.system('bootloadHID -r "%s"' % firmware_file) == 0:
+        print('\nDone!')
+    else:
+        print('\nbootloadHID returned an error.')
+
+def printDeviceInfo(dev):
+    """Prints all infos for a given USB device"""
+    print('Device Information:')
+    print('  idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
+    print('  idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
+    print('Manufacturer: %s' % (dev.iManufacturer))
+    print('Serial: %s' % (dev.iSerialNumber))
+    print('Product: %s' % (dev.iProduct), end='\n\n')
+
+def sendDeviceToBootloaderMode(dev):
+    """Tries to send a given ps2avrGB keyboard to bootloader mode to allow flashing."""
+    try:
+        dev.set_configuration()
+
+        request_type = usb.util.build_request_type(
+                usb.util.CTRL_OUT,
+                usb.util.CTRL_TYPE_CLASS,
+                usb.util.CTRL_RECIPIENT_DEVICE)
+
+        USBRQ_HID_SET_REPORT = 0x09
+        HID_REPORT_OPTION = 0x0301
+
+        dev.ctrl_transfer(request_type, USBRQ_HID_SET_REPORT, HID_REPORT_OPTION, 0, [0, 0, 0xFF] + [0] * 5)
+    except usb.core.USBError:
+        # for some reason I keep getting USBError, but it works!
+        pass
+
+
+if len(sys.argv) < 2:
+    print('Usage: %s <firmware.hex>' % sys.argv[0])
+    sys.exit(1)
+
+kb = checkForKeyboardInNormalMode()
+
+if kb is not None:
+    print('Found a keyboard in normal mode. Attempting to send it to bootloader mode ...', end='')
+    printDeviceInfo(kb)
+    sendDeviceToBootloaderMode(kb)
+    print(' done.')
+    print("Hint: If your keyboard can't be set to bootloader mode automatically, plug it in while pressing the bootloader key to do so manually.")
+    print("      You can find more infos about this here: https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB#setting-the-board-to-bootloader-mode")
+
+attempts = 12  # 60 seconds
+found = False
+for attempt in range(1, attempts + 1):
+    print("Searching for keyboard in bootloader mode (%i/%i) ... " % (attempt, attempts), end='')
+
+    if checkForKeyboardInBootloaderMode():
+        print('Found', end='\n\n')
+        flashKeyboard(sys.argv[1])
+        found = True
+        break
+    else:
+        print('Nothing.', end='')
+
+        if attempt != attempts:  # no need to wait on the last attempt
+            print(' Sleeping 5 seconds.', end='')
+            time.sleep(5)
+
+        # print a newline
+        print()
+
+if not found:
+    print("Couldn't find a flashable keyboard. Aborting.")
+    sys.exit(2)
+

keyboards/alice/readme.md

@@ -0,0 +1,60 @@
+# TGR Alice
+
+![TGR Alice](https://i.imgur.com/cJohEqS.jpg)
+
+An ergonomic 60% keyboard.
+
+Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury)  
+Hardware Supported: TGR Alice  
+Hardware Availability: Group buy finished  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alice:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
+
+ps2avrGB keyboard firmware
+==========================
+
+This keyboard uses the port of the QMK firmware for boards that are based on the
+ps2avrGB firmware.
+
+Note that this is a complete replacement for the firmware, so you won't be
+using Bootmapper Client to change any keyboard settings, since not all the
+USB report options are supported.
+
+## Installing
+
+First, install the requirements. These commands are for OSX, but all you
+need is the AVR toolchain and `bootloadHID` for flashing:
+
+```
+$ brew cask install crosspack-avr
+$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+$ pip install pyusb
+```
+
+Then, with the keyboard plugged in, simply run this command from the
+`qmk_firmware` directory:
+
+```
+$ make alice
+$ bootloadHID -r alice_default.hex
+```
+
+## Setting the board to bootloader mode
+
+Hold the ESC key (the one before the 1! key, in case you remaped it).
+
+## Troubleshooting
+
+From my experience, it's really hard to brick these boards. But these
+tricks have been useful when it got stuck in a weird scenario.
+
+1. Try plugging the board in while holding the bootloader key. This will force
+   it to boot only the bootloader without loading the firmware. Once this is
+   done, just reflash the board with the original firmware.
+2. Sometimes USB hubs can act weird, so try connecting the board directly
+   to your computer or plugging/unplugging the USB hub.

keyboards/alice/rules.mk

@@ -0,0 +1,48 @@
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
+# build options
+BOOTMAGIC_ENABLE = full
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+SRC += i2c_master.c
+
+# programming options
+PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex

keyboards/alice/usbconfig.h

@@ -0,0 +1,396 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'T', 'G', 'R'
+#define USB_CFG_VENDOR_NAME_LEN 3
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'T', 'G', 'R', ' ', 'A', 'l', 'i', 'c', 'e'
+#define USB_CFG_DEVICE_NAME_LEN 9
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */

keyboards/alpha/config.h

@@ -38,12 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
 #define RGB_DI_PIN F4
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/alps64/config.h

@@ -47,13 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/alps64/keymaps/crd/keymap.c

@@ -28,5 +28,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, _______,                            _______,                            _______, _______, _______
   )
 };
-
-const uint16_t PROGMEM fn_actions[] = {};

keyboards/alps64/keymaps/default/keymap.c

@@ -10,4 +10,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL, KC_LGUI, KC_LALT,                 KC_SPC,                                  KC_APP,  KC_RALT, KC_RGUI, KC_RCTL
   ),
 };
-const uint16_t PROGMEM fn_actions[] = {};

keyboards/alu84/config.h

@@ -54,11 +54,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLED_NUM 16

keyboards/alu84/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
 
 #define _BL 0
 #define _FN1 1
@@ -108,37 +107,3 @@ void led_set_user(uint8_t usb_led) {
 	}
 
 }
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/alu84/readme.md

@@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make alu84:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/amj40/config.h

@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

keyboards/amj40/readme.md

@@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make amj40:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/amj60/config.h

@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

keyboards/amj60/readme.md

@@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make amj60:maximized
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/amj96/config.h

@@ -114,11 +114,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/amj96/keymaps/default/keymap.c

@@ -36,10 +36,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   )
 };
 
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
   // MACRODOWN only works in this function

keyboards/amj96/readme.md

@@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make amj96:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
 
 ## Notes
 - In-switch and underglow LEDs currently not supported. 

keyboards/amjpad/config.h

@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

keyboards/amjpad/keymaps/default/keymap.c

@@ -4,9 +4,6 @@
 #include "rgblight.h"
 #endif
 
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -66,37 +63,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_P0, LT(_FL,KC_PDOT),  KC_PENT \
   ),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/amjpad/readme.md

@@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make amjpad:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/at101_blackheart/config.h

@@ -33,8 +33,3 @@
 
 /* force n-key rollover*/
 #define FORCE_NKRO
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)

keyboards/atom47/readme.md

@@ -21,6 +21,6 @@ Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?t
 ## Build
 To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`.
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
 
 ![Atom47](https://i.imgur.com/JfYnOba.jpg)

keyboards/atom47/rev2/config.h

@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4