[Keyboard] New Macropad: 1upkeyboards super16 (#5039)

* initial commit

* Do a nice write up for readme

* establish switch matrix and physical layout

* Put in the pins that are used

* QMK configurator support and keymap

* set bootloader to caterina because pro micro boohoo

* add ortho_4x4 support for user spaces

* got the columns reversed lol

Makefile

@@ -548,9 +548,10 @@ endif
 	# it has to be there to allow parallel execution of the submake
 	# This always tries to compile everything, even if error occurs in the middle
 	# But we return the error code at the end, to trigger travis failures
-	$(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND))
+	# The sort at this point is to remove duplicates
+	$(foreach COMMAND,$(sort $(COMMANDS)),$(RUN_COMMAND))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
-	$(foreach TEST,$(TESTS),$(RUN_TEST))
+	$(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 
 # These no longer work because of the colon system

build_keyboard.mk

@@ -369,5 +369,6 @@ $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 # Default target.
 all: build check-size
 build: elf cpfirmware
+check-size: build
 
 include $(TMK_PATH)/rules.mk

docs/config_options.md

@@ -87,7 +87,7 @@ This is a C header file that is one of the first things included, and will persi
   * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 * `#define LOCKING_RESYNC_ENABLE`
   * tries to keep switch state consistent with keyboard LED state
-* `#define IS_COMMAND() ( keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) )`
+* `#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))`
   * key combination that allows the use of magic commands (useful for debugging)
 * `#define USB_MAX_POWER_CONSUMPTION`
   * sets the maximum power (in mA) over USB for the device (default: 500)

docs/feature_backlight.md

@@ -40,6 +40,7 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
 |---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
 |`BACKLIGHT_PIN`      |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
 |`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 15 excluding off)                                                   |
+|`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                             |
 |`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if hardware PWM is used                                                          |
 |`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
 

docs/feature_command.md

@@ -16,35 +16,35 @@ To use Command, hold down the key combination defined by the `IS_COMMAND()` macr
 
 If you would like to change the key assignments for Command, `#define` these in your `config.h` at either the keyboard or keymap level. All keycode assignments here must omit the `KC_` prefix.
 
-|Define                              |Default                                                                               |Description                                     |
-|------------------------------------|--------------------------------------------------------------------------------------|------------------------------------------------|
-|`IS_COMMAND()`                      |<code>(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                                |Set default layer with the Function row         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                                |Set default layer with the number keys          |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                               |Set default layer with `MAGIC_KEY_LAYER0..9`    |
-|`MAGIC_KEY_DEBUG`                   |`D`                                                                                   |Toggle debugging over serial                    |
-|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                                   |Toggle key matrix debugging                     |
-|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                                   |Toggle keyboard debugging                       |
-|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                                   |Toggle mouse debugging                          |
-|`MAGIC_KEY_CONSOLE`                 |`C`                                                                                   |Enable the Command console                      |
-|`MAGIC_KEY_VERSION`                 |`V`                                                                                   |Print the running QMK version to the console    |
-|`MAGIC_KEY_STATUS`                  |`S`                                                                                   |Print the current keyboard status to the console|
-|`MAGIC_KEY_HELP1`                   |`H`                                                                                   |Print Command help to the console               |
-|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                               |Print Command help to the console (alternate)   |
-|`MAGIC_KEY_LAYER0`                  |`0`                                                                                   |Make layer 0 the default layer                  |
-|`MAGIC_KEY_LAYER1`                  |`1`                                                                                   |Make layer 1 the default layer                  |
-|`MAGIC_KEY_LAYER2`                  |`2`                                                                                   |Make layer 2 the default layer                  |
-|`MAGIC_KEY_LAYER3`                  |`3`                                                                                   |Make layer 3 the default layer                  |
-|`MAGIC_KEY_LAYER4`                  |`4`                                                                                   |Make layer 4 the default layer                  |
-|`MAGIC_KEY_LAYER5`                  |`5`                                                                                   |Make layer 5 the default layer                  |
-|`MAGIC_KEY_LAYER6`                  |`6`                                                                                   |Make layer 6 the default layer                  |
-|`MAGIC_KEY_LAYER7`                  |`7`                                                                                   |Make layer 7 the default layer                  |
-|`MAGIC_KEY_LAYER8`                  |`8`                                                                                   |Make layer 8 the default layer                  |
-|`MAGIC_KEY_LAYER9`                  |`9`                                                                                   |Make layer 9 the default layer                  |
-|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                                 |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                               |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                               |Enter the bootloader                            |
-|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                                |Lock the keyboard so nothing can be typed       |
-|`MAGIC_KEY_EEPROM`                  |`E`                                                                                   |Clear the EEPROM                                |
-|`MAGIC_KEY_NKRO`                    |`N`                                                                                   |Toggle N-Key Rollover (NKRO)                    |
-|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                                   |Toggle LED when computer is sleeping            |
+|Define                              |Default                                                                    |Description                                     |
+|------------------------------------|---------------------------------------------------------------------------|------------------------------------------------|
+|`IS_COMMAND()`                      |<code>(get_mods() == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                     |Set default layer with the Function row         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                     |Set default layer with the number keys          |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                    |Set default layer with `MAGIC_KEY_LAYER0..9`    |
+|`MAGIC_KEY_DEBUG`                   |`D`                                                                        |Toggle debugging over serial                    |
+|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                        |Toggle key matrix debugging                     |
+|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                        |Toggle keyboard debugging                       |
+|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                        |Toggle mouse debugging                          |
+|`MAGIC_KEY_CONSOLE`                 |`C`                                                                        |Enable the Command console                      |
+|`MAGIC_KEY_VERSION`                 |`V`                                                                        |Print the running QMK version to the console    |
+|`MAGIC_KEY_STATUS`                  |`S`                                                                        |Print the current keyboard status to the console|
+|`MAGIC_KEY_HELP1`                   |`H`                                                                        |Print Command help to the console               |
+|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                    |Print Command help to the console (alternate)   |
+|`MAGIC_KEY_LAYER0`                  |`0`                                                                        |Make layer 0 the default layer                  |
+|`MAGIC_KEY_LAYER1`                  |`1`                                                                        |Make layer 1 the default layer                  |
+|`MAGIC_KEY_LAYER2`                  |`2`                                                                        |Make layer 2 the default layer                  |
+|`MAGIC_KEY_LAYER3`                  |`3`                                                                        |Make layer 3 the default layer                  |
+|`MAGIC_KEY_LAYER4`                  |`4`                                                                        |Make layer 4 the default layer                  |
+|`MAGIC_KEY_LAYER5`                  |`5`                                                                        |Make layer 5 the default layer                  |
+|`MAGIC_KEY_LAYER6`                  |`6`                                                                        |Make layer 6 the default layer                  |
+|`MAGIC_KEY_LAYER7`                  |`7`                                                                        |Make layer 7 the default layer                  |
+|`MAGIC_KEY_LAYER8`                  |`8`                                                                        |Make layer 8 the default layer                  |
+|`MAGIC_KEY_LAYER9`                  |`9`                                                                        |Make layer 9 the default layer                  |
+|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                      |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                    |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                    |Enter the bootloader                            |
+|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                     |Lock the keyboard so nothing can be typed       |
+|`MAGIC_KEY_EEPROM`                  |`E`                                                                        |Clear the EEPROM                                |
+|`MAGIC_KEY_NKRO`                    |`N`                                                                        |Toggle N-Key Rollover (NKRO)                    |
+|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                        |Toggle LED when computer is sleeping            |

docs/newbs.md

@@ -6,10 +6,11 @@ Not sure if your keyboard can run QMK? If it's a mechanical keyboard you built y
 
 ## Overview
 
-There are 6 main sections to this guide:
+There are 7 main sections to this guide:
 
 * [Getting Started](newbs_getting_started.md)
-* [Building Your First Firmware](newbs_building_firmware.md)
+* [Building Your First Firmware using the command line](newbs_building_firmware.md)
+* [Building Your First Firmware using the online GUI](newbs_building_firmware_configurator.md)
 * [Flashing Firmware](newbs_flashing.md)
 * [Testing and Debugging](newbs_testing_debugging.md)
 * [Git Best Practices](newbs_best_practices.md)

docs/newbs_building_firmware_configurator.md

@@ -0,0 +1,105 @@
+# QMK Configurator
+
+The [QMK Configurator](https://config.qmk.fm) is an online graphical user interface that generates QMK Firmware hex files.  
+
+?> **Please follow these steps in order.**
+
+Watch the [Video Tutorial](https://youtu.be/7RH-1pAbjvw)
+
+The QMK Configurator works best with Chrome/Firefox. 
+
+
+!> **Files from other tools such as KLE, or kbfirmware will not be compatible with QMK Configurator. Do not load them, do not import them. QMK Configurator is a DIFFERENT tool. **
+
+## Selecting your keyboard
+
+Click the drop down box and select the keyboard you want to create a keymap for. 
+
+?> If your keyboard has several versions, make sure you select the correct one.** 
+
+I'll say that again because it's important
+
+!> **MAKE SURE YOU SELECT THE RIGHT VERSION!**
+
+If your keyboard has been advertised to be powered by QMK but is not in the list, chances are a developer hasn't gotten to it yet or we haven't had a chance to merge it in yet. File an issue at [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) requesting to support that particular keyboard, if there is no active [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) for it. There are also QMK powered keyboards that are in their manufacturer's own github accounts. Double check for that as well. 
+
+## Selecting your keyboard layout
+
+Choose the layout that best represents the keymap you want to create. Some keyboards do not have enough layouts or correct layouts defined yet. They will be supported in the future. 
+
+## Keymap Name
+
+Call this keymap what you want. 
+
+?> If you are running into issues when compiling, it may be worth changing this name, as it may already exist in the QMK  Firmware repo.
+
+## Creating Your Keymap
+
+Keycode Entry is accomplished in 3 ways.  
+1. Drag and dropping 
+2. Clicking on an empty spot on the layout and clicking the keycode you desire
+3. Clicking on an empty spot on the layout, pressing the physical key on your keyboard. 
+
+Hover your mouse over a key and a short blurb will tell you what that keycode does. For a more verbose description please see    
+
+[Basic Keycode Reference](https://docs.qmk.fm/#/keycodes_basic)    
+[Advanced Keycode Reference](https://docs.qmk.fm/#/feature_advanced_keycodes)    
+
+In the event that you can't find a layout that supports your keymap, for example three spots for spacebar, or two spots for backspace, or 2 spots for shift etc etc, Fill them ALL up. 
+
+### Example:
+
+3 spots for spacebar: Fill them ALL with spacebar
+
+2 spots for backspace: Fill them BOTH with backspace
+
+2 spots for right shift: Fill them BOTH with right shift
+
+1 spot for left shift and 1 spot for iso support: Fill them both with left shift
+
+5 spots, but only 4 keys: Guess and check or ask someone who has done it before. 
+
+## Saving Your Keymap for Future Edits
+
+When you're satisfied with your keymap or just want to work on it later, press the `Export Keymap` button. It will save your keymap as the name you chose above appended with .json. 
+
+You can then load this .json file in the future by pressing the `Import Keymap` button. 
+
+!> **CAUTION:** This is not the same type of .json file used for kbfirmware.com or any other tool. If you try to use this for those tools, or the .json from those tools with QMK Configurator, there is a chance your keyboard will **explode**. 
+
+## Generating your firmware file
+
+Press the green `Compile` button.
+
+When the compilation is done, you will be able to press the green `Download Firmware` button. 
+
+## Flashing Your Keyboard
+
+Please refer to [Flashing Firmware](newbs_flashing.md)
+
+## Troubleshooting
+
+#### My .json file is not working
+
+If the .json file was generated with QMK Configurator, congratulations you have stumbled upon a bug. File an issue at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)
+
+If not....how did you miss my big bold message at the top saying not to use other .json files? 
+
+#### There are extra spaces in my layout? What do I do? 
+
+If you're referring to having three spots for space bar, the best course of action is to just fill them all with space bar. The same can be done for backspace and shifts
+
+#### What is the keycode for.......
+
+Please see
+
+[Basic Keycode Reference](https://docs.qmk.fm/#/keycodes_basic)    
+[Advanced Keycode Reference](https://docs.qmk.fm/#/feature_advanced_keycodes)    
+
+#### It won't compile
+
+Please double check the other layers of your keymap to make sure there are no random keys present. 
+
+## Problems and Bugs
+
+We are always accepting customer requests and bug reports. Please file them at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)

docs/newbs_getting_started.md

@@ -6,7 +6,10 @@ QMK tries to put a lot of power into your hands by making easy things easy, and
 
 # Getting Started
 
-Before you can build keymaps, you need to install some software and set up your build environment. This only has to be done once no matter how many keyboards you plan to compile firmware for.
+Before you can build keymaps, you need to install some software and set up your build environment. This only has to be done once no matter how many keyboards you plan to compile firmware for. 
+
+If you would prefer a more graphical user interface approach, please consider using the online [QMK Configurator](https://config.qmk.fm). Please refer to [Building Your First Firmware using the online GUI](newbs_building_firmware_configurator.md). 
+
 
 ## Download Software
 

drivers/avr/ws2812.c

@@ -128,11 +128,11 @@ unsigned char I2C_Write(unsigned char c)
         c <<= 1;
     }
 
-    
+
     I2C_WriteBit(0);
     _delay_us(I2C_DELAY);
     _delay_us(I2C_DELAY);
-  
+
     // _delay_us(I2C_DELAY);
     //return I2C_ReadBit();
     return 0;

keyboards/1upkeyboards/1up60hte/1up60hte.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "1up60hte.h"

keyboards/1upkeyboards/1up60hte/1up60hte.h

@@ -0,0 +1,50 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
+	K400, K401, K402,                   K406,                   K410, K411, K412, K413  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413 }  \
+}
+
+/* HHKB Variant */
+#define LAYOUT_60_hhkb( \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
+	      K401, K402,                  K406,                    K410, K411,       K413  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO }, \
+	{ KC_NO, K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413 }  \
+}
+

keyboards/1upkeyboards/1up60hte/config.h

@@ -0,0 +1,65 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    1upkeyboards
+#define PRODUCT         1up60hte
+#define DESCRIPTION     A custom 60% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
+#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D0, D1, D2, D3, D5, D6, D7, B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c

@@ -0,0 +1,80 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_NO,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_BSPC),
+
+	[1] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+void matrix_init_user(void) {
+  setPinOutput(B6);
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		writePinLow(B6);
+	} else {
+		writePinHigh(B6);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c

@@ -0,0 +1,79 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(1),
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_BSPC),
+
+	[1] = LAYOUT_all(
+		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS,
+		KC_CAPS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL)
+};
+
+void matrix_init_user(void) {
+  setPinOutput(B6);
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		writePinLow(B6);
+	} else {
+		writePinHigh(B6);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1upkeyboards/1up60hte/readme.md

@@ -0,0 +1,13 @@
+# 1up60hte (Hot Swap Edition - Tsangan)
+
+A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a Tsangan layout.
+
+Keyboard Maintainer: [Bubnick](https://github.com/bubnick)  
+Hardware Supported: 1up60hte 60% PCB  
+Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 1upkeyboards/1up60hte:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -0,0 +1,58 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
+
+LAYOUTS = 60_hhkb

keyboards/1upkeyboards/super16/config.h

@@ -0,0 +1,244 @@
+/*
+Copyright 2019 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    1upkeyboards
+#define PRODUCT         super16
+#define DESCRIPTION     A 4x4 custom macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D1, D0, F4, F5 }
+#define MATRIX_COL_PINS { D4, C6, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 16 // Add 12 if attaching the RGB LED ring
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/1upkeyboards/super16/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "super16", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 4, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT_ortho_4x4": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]
+        }
+    }
+}

keyboards/1upkeyboards/super16/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 'mechmerlin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/1upkeyboards/super16/keymaps/default/keymap.c

@@ -0,0 +1,65 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ortho_4x4( /* Base */
+    KC_A,  KC_1,  KC_2, KC_4, \
+    KC_A,  KC_1,  KC_2, KC_4, \
+    KC_A,  KC_1,  KC_2, KC_4, \
+    KC_A,  KC_1,  KC_2, KC_4 \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/1upkeyboards/super16/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for super16

keyboards/1upkeyboards/super16/readme.md

@@ -0,0 +1,13 @@
+# Super 16 Macro Pad
+
+A 4x4 macropad with RGB underglow.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Super 16 Macropad  
+Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/keyboard-kits/super-16-macro-pad/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 1upkeyboards/super16:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/1upkeyboards/super16/rules.mk

@@ -0,0 +1,83 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = ortho_4x4

keyboards/1upkeyboards/super16/super16.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "super16.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/1upkeyboards/super16/super16.h

@@ -0,0 +1,39 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_4x4( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, k23, \
+    k30, k31, k32, k33  \
+) \
+{ \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+    { k30, k31, k32, k33 }, \
+}

keyboards/1upkeyboards/sweet16/keymaps/sebas/keymap.c

@@ -0,0 +1,23 @@
+#include QMK_KEYBOARD_H
+#define ALT TG(_FUNC)
+
+enum layers {
+ _KEYP,
+ _FUNC
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_KEYP]=LAYOUT_ortho_4x4(
+  KC_P7, KC_P8,   KC_P9,   ALT,
+  KC_P4, KC_P5,   KC_P6,   KC_PAST,
+  KC_P1, KC_P2,   KC_P3,   KC_PMNS,
+  KC_P0, KC_PDOT, KC_PENT, KC_PPLS
+),
+[_FUNC]=LAYOUT_ortho_4x4(
+  KC_MPRV, KC_MPLY, KC_MNXT, _______,
+  XXXXXXX, XXXXXXX, XXXXXXX, KC_NLCK,
+  KC_INS,  KC_HOME, KC_PGUP, XXXXXXX,
+  KC_DEL,  KC_END,  KC_PGDN, XXXXXXX
+)
+};

keyboards/40percentclub/half_n_half/config.h

@@ -0,0 +1,244 @@
+/*
+Copyright 2019 Boy_314
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x4A1F
+#define MANUFACTURER    di0ib
+#define PRODUCT         half_n_half
+#define DESCRIPTION     A small split ortholinear custom keyboard with 2 thumb buttons
+
+/* key matrix size */
+#define MATRIX_ROWS 4*2
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/half_n_half/half_n_half.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 Boy_314
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "half_n_half.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/40percentclub/half_n_half/half_n_half.h

@@ -0,0 +1,43 @@
+/* Copyright 2019 Boy_314
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06,     K50, K51, K52, K53, K54, K55, K56, \
+    K10, K11, K12, K13, K14, K15, K16,     K60, K61, K62, K63, K64, K65, K66, \
+    K20, K21, K22, K23, K24, K25, K26,     K70, K71, K72, K73, K74, K75, K76, \
+                        K34,                         K82 \
+) { \
+    { K00,   K01,   K02,   K03,   K04, K05,   K06   }, \
+    { K10,   K11,   K12,   K13,   K14, K15,   K16   }, \
+    { K20,   K21,   K22,   K23,   K24, K25,   K26   }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, K34, KC_NO, KC_NO }, \
+\
+    { K56,   K55,   K54,   K53,   K52, K51,   K50   }, \
+    { K66,   K65,   K64,   K63,   K62, K61,   K60   }, \
+    { K76,   K75,   K74,   K73,   K72, K71,   K70   }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, K82, KC_NO, KC_NO }  \
+}

keyboards/40percentclub/half_n_half/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/40percentclub/half_n_half/keymaps/default/keymap.c

@@ -0,0 +1,65 @@
+/* Copyright 2019 Boy_314
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_GESC, KC_Q, KC_W, KC_E, KC_R,   KC_T, KC_LCTL, KC_RCTL, KC_Y, KC_U,   KC_I,    KC_O,   KC_P,    KC_BSPC, \
+    KC_TAB,  KC_A, KC_S, KC_D, KC_F,   KC_G, KC_LALT, KC_RALT, KC_H, KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT, \
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V,   KC_B, KC_LGUI, KC_APP,  KC_N, KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_ENT,  \
+                               KC_SPC,                               KC_SPC
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/40percentclub/half_n_half/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for half_n_half

keyboards/40percentclub/half_n_half/readme.md

@@ -0,0 +1,14 @@
+# half_n_half
+
+![half_n_half](https://2.bp.blogspot.com/-akouSRzGKQw/WutIH4qV0nI/AAAAAAACRqA/D1Gx3i1UWlccMCd0VS8td0ckWjCixrSuQCLcBGAs/s1600/b.jpg)
+
+A small split ortho board with two thumb keys
+
+Keyboard Maintainer: [Boy_314](https://github.com/boy-314)  
+Hardware Availability: http://www.40percent.club/2018/07/half-n-half.html
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 40percentclub/half_n_half:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/half_n_half/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/ai03/README.md

@@ -0,0 +1,4 @@
+# ai03
+QMK folders for PCB commissions.
+
+Website: [ai03 Keyboard Designs](https://kb.ai03.me/)

keyboards/ai03/lunar/config.h

@@ -0,0 +1,266 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA103
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Switchplate Peripherals
+#define PRODUCT         Lunar
+#define DESCRIPTION     65% AEK keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
+
+/* VIA Configurator Compatibility */
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR = DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635
+// DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE = 1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389   
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/ai03/lunar/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Lunar", 
+    "url": "https://geekhack.org/index.php?topic=96112.0", 
+    "maintainer": "ai03", 
+    "bootloader": "", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":2.25}, {"x":6.5, "y":4, "w":1.5}, {"x":8, "y":4, "w":2.75}, {"label":"Alt", "x":10.75, "y":4, "w":1.25}, {"label":"Win", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        }
+    }
+}

keyboards/ai03/lunar/keymaps/default/keymap.c

@@ -0,0 +1,90 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  MANUAL = SAFE_RANGE,
+  SWPLURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	
+	/*
+	
+	Layout
+	
+	K000 K001 K002 K003 K004 K005 K006 K007 K008 K009 K010 K011 K012 K013 K212 K014
+	K100  K101  K102 K103 K104 K105 K106 K107 K108 K109 K110 K111   K112  K113 K114
+	K200    K201 K202 K203 K204 K205 K206 K207 K208 K209 K210 K211     K213    K214
+	K300      K301 K302 K303 K304 K305 K306 K307 K308 K309 K310 K311    K313   K314
+	K400 K401 K402        K403       K405       K407       K409 K410 K411 K413 K414
+	
+	K212 = Split backspace (bound to Del by default)
+	K403, K407 = Split space (bound to space by default)
+	K405 = Main space
+	
+	*/
+	
+	[0] = LAYOUT( /* Base */
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME, 
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_END, 
+		MO(1),            KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP, 
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_PGDN, 
+		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    MO(1),   KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+	[1] = LAYOUT( /* FN */
+		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  MANUAL, 
+		KC_CAPS,          _______, KC_UP,   _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_MPRV, KC_MPLY, KC_MNXT, _______, SWPLURL, 
+		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4,   KC_P5,   KC_P6,   _______, _______,          _______, _______, 
+		_______,          KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0,   KC_P1,   KC_P2,   KC_P3,   _______, _______,          KC_PGUP, _______, 
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
+	)
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case MANUAL:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("https://kb.ai03.me/redir/lunar/index.html");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case SWPLURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://switchplate.co/collections/lunar-group-buy");
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/ai03/lunar/keymaps/default/readme.md

@@ -0,0 +1,2 @@
+# The default keymap for Lunar
+For use without VIA configurator.

keyboards/ai03/lunar/keymaps/via/keymap.c

@@ -0,0 +1,64 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	
+	/*
+	
+	Layout
+	
+	K000 K001 K002 K003 K004 K005 K006 K007 K008 K009 K010 K011 K012 K013 K212 K014
+	K100  K101  K102 K103 K104 K105 K106 K107 K108 K109 K110 K111   K112  K113 K114
+	K200    K201 K202 K203 K204 K205 K206 K207 K208 K209 K210 K211     K213    K214
+	K300      K301 K302 K303 K304 K305 K306 K307 K308 K309 K310 K311    K313   K314
+	K400 K401 K402        K403       K405       K407       K409 K410 K411 K413 K414
+	
+	K212 = Split backspace (bound to Del by default)
+	K403, K407 = Split space (bound to space by default)
+	K405 = Main space
+	
+	*/
+	
+	[0] = LAYOUT( /* Base */
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME, 
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_END, 
+		MO(1),            KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP, 
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_PGDN, 
+		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    MO(1),   KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+	[1] = LAYOUT( /* FN */
+		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  _______, 
+		KC_CAPS,          _______, KC_UP,   _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, 
+		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4,   KC_P5,   KC_P6,   _______, _______,          _______, _______, 
+		_______,          KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0,   KC_P1,   KC_P2,   KC_P3,   _______, _______,          KC_PGUP, _______, 
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
+	),
+	[2] = LAYOUT( /* Blank. For VIA compatibility */
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______, _______
+	),
+	[3] = LAYOUT( /* Blank. For VIA compatibility */
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______, _______
+	)
+};

keyboards/ai03/lunar/keymaps/via/readme.md

@@ -0,0 +1,2 @@
+# The VIA keymap for Lunar
+This keymap is for compatibility with the VIA configurator.

keyboards/ai03/lunar/keymaps/via/rules.mk

@@ -0,0 +1,86 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+SRC += keyboards/wilba_tech/wt_main.c
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes

keyboards/ai03/lunar/lunar.c

@@ -0,0 +1,22 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "lunar.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/ai03/lunar/lunar.h

@@ -0,0 +1,41 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, K014, \
+	K100,       K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K213, K214, \
+	K300,       K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+	K400, K401, K402,       K403,       K405,       K407,             K409, K410, K411, K413, K414  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ K400,  K401,  K402,  K403,  KC_NO, K405,  KC_NO, K407,  KC_NO, K409,  K410,  K411,  KC_NO, K413,  K414 }  \
+}

keyboards/ai03/lunar/readme.md

@@ -0,0 +1,15 @@
+# Lunar
+
+![Photo](https://i.imgur.com/hYoW8IJ.jpg)  
+
+A 65% keyboard made specifically for Alps SKCM/L switches and AEK/M0116 keycaps.
+
+Keyboard Maintainer: [ai03](https://github.com/ai03-2725)  
+Hardware Supported: Official Lunar PCB  
+Hardware Availability: [Switchplate Peripherals](https://switchplate.co/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ai03/lunar:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ai03/lunar/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/alice/alice.h

@@ -19,13 +19,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
+/* LAYOUT
+ * ┌───┐ ┌───┬───┬───┬───┬───┬───┬───┐         ┌───┬───┬───┬───┬───┬───┬───┬───┐
+ * │63 │ │00 │01 │02 │03 │04 │05 │06 │         │07 │08 │09 │10 │11 │12 │13 │14 │
+ * ├───┤ ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┘       ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │64 │ │15   │16 │17 │18 │19 │20 │         │21 │22 │23 │24 │25 │26 │27 │28   │
+ * ├───┤ ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┐        └┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │65 │ │29    │30 │31 │32 │33 │34 │         │35 │36 │37 │38 │39 │40 │41      │
+ * └───┘ ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┐     ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ *       │42      │43 │44 │45 │46 │47 │     │48 │49 │50 │51 │52 │53 │54    │55 │
+ *       ├─────┬──┴──┬┴───┴┬──┴───┴┬──┴─┐   ├───┴───┴──┬┴───┴┬──┴───┴────┬─┴───┤
+ *       │56   │     │57   │58     │59  │   │60        │61   │           │62   │
+ *       └─────┘     └─────┴───────┴────┘   └──────────┴─────┘           └─────┘
+ */
 #define LAYOUT( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, \
-  K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28,      \
-  K29, K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41,           \
-  K42, K43, K44, K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55,      \
-  K56, K57, K58, K59, K60, K61, K62,                                         \
-  K63, K64, K65                                                              \
+  K63,   K00, K01, K02, K03, K04, K05, K06,      K07, K08, K09, K10, K11, K12, K13, K14, \
+  K64,   K15, K16, K17, K18, K19, K20,      K21, K22, K23, K24, K25, K26, K27, K28,      \
+  K65,   K29, K30, K31, K32, K33, K34,      K35, K36, K37, K38, K39, K40,      K41,      \
+         K42, K43, K44, K45, K46, K47,      K48, K49, K50, K51, K52, K53, K54, K55,      \
+         K56,      K57,      K58, K59,           K60,      K61,                K62       \
 ) \
 { \
   { K00  , K01  , K02  , K03  , K04  , K05  , K06  , K07  , K08  , K09  , K10  , K11  , K12  , K13  , K14   }, \

keyboards/alice/config.h

@@ -29,10 +29,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COLS 15
 
 #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
 #define DIODE_DIRECTION COL2ROW
 
-#define RGBLED_NUM 20
+#define RGBLED_NUM 18
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1

keyboards/alice/info.json

@@ -6,7 +6,75 @@
   "height": 5,
   "layouts": {
     "LAYOUT": {
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.25, "y":0}, {"label":"!", "x":2.25, "y":0}, {"label":"@", "x":3.25, "y":0}, {"label":"#", "x":4.25, "y":0}, {"label":"$", "x":5.25, "y":0}, {"label":"%", "x":6.25, "y":0}, {"label":"^", "x":7.25, "y":0}, {"label":"&", "x":9.75, "y":0}, {"label":"*", "x":10.75, "y":0}, {"label":"(", "x":11.75, "y":0}, {"label":")", "x":12.75, "y":0}, {"label":"_", "x":13.75, "y":0}, {"label":"+", "x":14.75, "y":0}, {"label":"|", "x":15.75, "y":0}, {"label":"~", "x":16.75, "y":0}, {"label":"Insert", "x":0, "y":1}, {"label":"Tab", "x":1.25, "y":1, "w":1.5}, {"label":"Q", "x":2.75, "y":1}, {"label":"W", "x":3.75, "y":1}, {"label":"E", "x":4.75, "y":1}, {"label":"R", "x":5.75, "y":1}, {"label":"T", "x":6.75, "y":1}, {"label":"Y", "x":9.25, "y":1}, {"label":"U", "x":10.25, "y":1}, {"label":"I", "x":11.25, "y":1}, {"label":"O", "x":12.25, "y":1}, {"label":"P", "x":13.25, "y":1}, {"label":"{", "x":14.25, "y":1}, {"label":"}", "x":15.25, "y":1}, {"label":"Backspace", "x":16.25, "y":1, "w":1.5}, {"label":"Delete", "x":0, "y":2}, {"label":"Caps Lock", "x":1.25, "y":2, "w":1.75}, {"label":"A", "x":3, "y":2}, {"label":"S", "x":4, "y":2}, {"label":"D", "x":5, "y":2}, {"label":"F", "x":6, "y":2}, {"label":"G", "x":7, "y":2}, {"label":"H", "x":9.5, "y":2}, {"label":"J", "x":10.5, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"L", "x":12.5, "y":2}, {"label":":", "x":13.5, "y":2}, {"label":"\"", "x":14.5, "y":2}, {"label":"Enter", "x":15.5, "y":2, "w":2.25}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":9, "y":3}, {"label":"N", "x":10, "y":3}, {"label":"M", "x":11, "y":3}, {"label":"<", "x":12, "y":3}, {"label":">", "x":13, "y":3}, {"label":"?", "x":14, "y":3}, {"label":"Shift", "x":15, "y":3, "w":1.75}, {"label":"Fn", "x":16.75, "y":3}, {"label":"Ctrl", "x":1.25, "y":4, "w":1.5}, {"label":"Alt", "x":3.5, "y":4, "w":1.5}, {"x":5, "y":4, "w":2.25}, {"label":"Win", "x":7.25, "y":4, "w":1.25}, {"x":9, "y":4, "w":2.75}, {"label":"Alt", "x":11.75, "y":4, "w":1.5}, {"label":"Ctrl", "x":16.25, "y":4, "w":1.5}]
+      "key_count": 66,
+      "layout": [
+        {"label":"K63", "x":0, "y":0},
+        {"label":"K00", "x":1.25, "y":0},
+        {"label":"K01", "x":2.25, "y":0},
+        {"label":"K02", "x":3.25, "y":0},
+        {"label":"K03", "x":4.25, "y":0},
+        {"label":"K04", "x":5.25, "y":0},
+        {"label":"K05", "x":6.25, "y":0},
+        {"label":"K06", "x":7.25, "y":0},
+        {"label":"K07", "x":10.25, "y":0},
+        {"label":"K08", "x":11.25, "y":0},
+        {"label":"K09", "x":12.25, "y":0},
+        {"label":"K10", "x":13.25, "y":0},
+        {"label":"K11", "x":14.25, "y":0},
+        {"label":"K12", "x":15.25, "y":0},
+        {"label":"K13", "x":16.25, "y":0},
+        {"label":"K14", "x":17.25, "y":0},
+        {"label":"K64", "x":0, "y":1},
+        {"label":"K15", "x":1.25, "y":1, "w":1.5},
+        {"label":"K16", "x":2.75, "y":1},
+        {"label":"K17", "x":3.75, "y":1},
+        {"label":"K18", "x":4.75, "y":1},
+        {"label":"K19", "x":5.75, "y":1},
+        {"label":"K20", "x":6.75, "y":1},
+        {"label":"K21", "x":9.75, "y":1},
+        {"label":"K22", "x":10.75, "y":1},
+        {"label":"K23", "x":11.75, "y":1},
+        {"label":"K24", "x":12.75, "y":1},
+        {"label":"K25", "x":13.75, "y":1},
+        {"label":"K26", "x":14.75, "y":1},
+        {"label":"K27", "x":15.75, "y":1},
+        {"label":"K28", "x":16.75, "y":1, "w":1.5},
+        {"label":"K65", "x":0, "y":2},
+        {"label":"K29", "x":1.25, "y":2, "w":1.75},
+        {"label":"K30", "x":3, "y":2},
+        {"label":"K31", "x":4, "y":2},
+        {"label":"K32", "x":5, "y":2},
+        {"label":"K33", "x":6, "y":2},
+        {"label":"K34", "x":7, "y":2},
+        {"label":"K35", "x":10, "y":2},
+        {"label":"K36", "x":11, "y":2},
+        {"label":"K37", "x":12, "y":2},
+        {"label":"K38", "x":13, "y":2},
+        {"label":"K39", "x":14, "y":2},
+        {"label":"K40", "x":15, "y":2},
+        {"label":"K41", "x":16, "y":2, "w":2.25},
+        {"label":"K42", "x":1.25, "y":3, "w":2.25},
+        {"label":"K43", "x":3.5, "y":3},
+        {"label":"K44", "x":4.5, "y":3},
+        {"label":"K45", "x":5.5, "y":3},
+        {"label":"K46", "x":6.5, "y":3},
+        {"label":"K47", "x":7.5, "y":3},
+        {"label":"K48", "x":9.5, "y":3},
+        {"label":"K49", "x":10.5, "y":3},
+        {"label":"K50", "x":11.5, "y":3},
+        {"label":"K51", "x":12.5, "y":3},
+        {"label":"K52", "x":13.5, "y":3},
+        {"label":"K53", "x":14.5, "y":3},
+        {"label":"K54", "x":15.5, "y":3, "w":1.75},
+        {"label":"K55", "x":17.25, "y":3},
+        {"label":"K56", "x":1.25, "y":4, "w":1.5},
+        {"label":"K57", "x":4.25, "y":4, "w":1.5},
+        {"label":"K58", "x":5.75, "y":4, "w":2},
+        {"label":"K59", "x":7.75, "y":4, "w":1.25},
+        {"label":"K60", "x":9.5, "y":4, "w":2.75},
+        {"label":"K61", "x":12.25, "y":4, "w":1.5},
+        {"label":"K62", "x":16.75, "y":4, "w":1.5}
+      ]
     }
   }
 }

keyboards/alice/keymaps/default/keymap.c

@@ -19,19 +19,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                   \
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),           \
-        KC_LGUI, KC_LALT, KC_SPC,  KC_LGUI, KC_SPC,  KC_RALT, KC_RCTL,                                                                      \
-        KC_ESC,  KC_PGUP, KC_PGDN                                                                                                     \
+        KC_ESC,     KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
+        KC_PGUP,    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
+        KC_PGDN,    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           \
+                    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),            \
+                    KC_LGUI,          KC_LALT,          KC_SPC,  KC_LGUI,          KC_SPC,           KC_RALT,                            KC_RCTL           \
     ),
     [1] = LAYOUT(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP  , _______, _______,         \
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______,                   \
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,           \
-        _______, _______, _______, _______, _______, _______, _______,                                                                      \
-        _______, _______, _______                                                                                                      \
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP  , _______, _______,          \
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT,          _______,          \
+                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,          \
+                    _______,          _______,          _______, _______,          _______,          _______,                            _______           \
     ),
 };

keyboards/alice/keymaps/mrkeebs/keymap.c

@@ -19,19 +19,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                   \
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),           \
-        KC_LGUI, KC_LALT, KC_SPC,  KC_LGUI, KC_SPC,  KC_RALT, KC_RCTL,                                                                      \
-        KC_ESC,  KC_PGUP, KC_PGDN                                                                                                     \
+        KC_ESC,     KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
+        KC_PGUP,    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
+        KC_PGDN,    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           \
+                    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),            \
+                    KC_LGUI,          KC_LALT,          KC_SPC,  KC_LGUI,          KC_SPC,           KC_RALT,                            KC_RCTL           \
     ),
     [1] = LAYOUT(
-        KC_GRV , KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_INS, \
-        _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_UP  , _______, _______,         \
-        _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______,                   \
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,           \
-        _______, _______, _______, _______, _______, _______, _______,                                                                      \
-        RESET,   _______, _______                                                                                                      \
+        RESET,      KC_GRV , KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_INS,  \
+        _______,    _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_UP  , _______, _______,          \
+        _______,    _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______,                   \
+                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,          \
+                    _______,          _______,          _______, _______,          _______,          _______,                            _______           \
     ),
 };

keyboards/bdn9/info.json

@@ -0,0 +1,22 @@
+{
+  "keyboard_name": "Keeb.io BDN9",
+  "url": "",
+  "maintainer": "nooges",
+  "width": 3,
+  "height": 3,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"x":0, "y":0},
+        {"x":1, "y":0},
+        {"x":2, "y":0},
+        {"x":0, "y":1},
+        {"x":1, "y":1},
+        {"x":2, "y":1},
+        {"x":0, "y":2},
+        {"x":1, "y":2},
+        {"x":2, "y":2}
+      ]
+    }
+  }
+}

keyboards/cannonkeys/bluepill/keyboard.c

@@ -1,15 +1,9 @@
-
-#include "ortho60.h"
-
 #include "ch.h"
 #include "hal.h"
-
-#include "underglow.h"
-#include "print.h"
-#include "debug.h"
+#include "led_custom.h"
 #include "util.h"
+#include "quantum.h"
 
-/* generic STM32F103C8T6 board */
 #ifdef BOARD_GENERIC_STM32_F103
 #define LED_ON()    do { palClearPad(GPIOC, 13) ;} while (0)
 #define LED_OFF()   do { palSetPad(GPIOC, 13); } while (0)
@@ -19,14 +13,18 @@
 void matrix_init_kb(void){
       /* MOSI pin*/
     palSetPadMode(GPIOB, 15, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
-
     LED_ON();
-    palSetPad(GPIOA, 8);
     wait_ms(500);
-    palClearPad(GPIOA, 8);
     LED_OFF();
 
+#ifdef RGBLIGHT_ENABLE
     leds_init();
-
-
+#endif
+}
+
+void matrix_scan_kb(void)
+{
+  #ifdef RGBLIGHT_ENABLE
+    rgblight_task();
+  #endif
 }

keyboards/cannonkeys/bluepill/led.c

@@ -0,0 +1,257 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+#include "backlight.h"
+#include "led.h"
+#include "led_custom.h"
+#include "printf.h"
+
+static void breathing_callback(PWMDriver *pwmp);
+
+static PWMConfig pwmCFG = {
+  0xFFFF,                              /* PWM clock frequency  */
+  256,                              /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
+  NULL,                               /* No Callback */
+  {
+      {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL}
+  },
+  0,                                  /* HW dependent part.*/
+  0
+};
+
+static PWMConfig pwmCFG_breathing = {
+  0xFFFF,                              /* 10kHz PWM clock frequency  */
+  256,                              /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
+  breathing_callback,                               /* Breathing Callback */
+  {
+      {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL}
+  },
+  0,                                  /* HW dependent part.*/
+  0
+};
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+  if (v <= 5243) // if below 8% of max
+    return v / 9; // same as dividing by 900%
+  else {
+    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+    // to get a useful result with integer division, we shift left in the expression above
+    // and revert what we've done again after squaring.
+    y = y * y * y >> 8;
+    if (y > 0xFFFFUL) // prevent overflow
+      return 0xFFFFU;
+    else
+      return (uint16_t) y;
+  }
+}
+
+
+void backlight_init_ports(void) {
+    printf("backlight_init_ports()\n");
+    #ifdef BACKLIGHT_ENABLE
+
+    palSetPadMode(GPIOA, 8, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+    pwmStart(&PWMD1, &pwmCFG);
+    pwmEnableChannel(&PWMD1, 0, PWM_FRACTION_TO_WIDTH(&PWMD1, 0xFFFF,cie_lightness(0xFFFF)));
+    #endif
+}
+
+void backlight_set(uint8_t level) {
+    printf("backlight_set(%d)\n", level);
+    #ifdef BACKLIGHT_ENABLE
+    uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS));
+    printf("duty: (%d)\n", duty);
+    if (level == 0) {
+        // Turn backlight off
+        pwmDisableChannel(&PWMD1, 0);
+    } else {
+      // Turn backlight on
+      if(!is_breathing()){
+        pwmEnableChannel(&PWMD1, 0, PWM_FRACTION_TO_WIDTH(&PWMD1,0xFFFF,duty));
+      }
+    }
+    #endif
+}
+
+
+uint8_t backlight_tick = 0;
+
+void backlight_task(void) {
+}
+
+#define BREATHING_NO_HALT  0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON  2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+bool is_breathing(void) {
+    return PWMD1.config == &pwmCFG_breathing;
+}
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0)
+
+
+void breathing_interrupt_enable(void){
+    pwmStop(&PWMD1);
+    printf("starting with callback\n");
+    pwmStart(&PWMD1, &pwmCFG_breathing);
+    chSysLockFromISR();
+    pwmEnablePeriodicNotification(&PWMD1);
+    pwmEnableChannelI(
+      &PWMD1,
+      0,
+      PWM_FRACTION_TO_WIDTH(
+        &PWMD1,
+        0xFFFF,
+        0xFFFF
+      )
+    );
+    chSysUnlockFromISR();
+}
+
+void breathing_interrupt_disable(void){
+    pwmStop(&PWMD1);
+    printf("starting without callback\n");
+    pwmStart(&PWMD1, &pwmCFG);
+}
+
+void breathing_enable(void)
+{
+  printf("breathing_enable()\n");
+  breathing_counter = 0;
+  breathing_halt = BREATHING_NO_HALT;
+  breathing_interrupt_enable();
+}
+
+void breathing_pulse(void)
+{
+    if (get_backlight_level() == 0)
+      breathing_min();
+    else
+      breathing_max();
+    breathing_halt = BREATHING_HALT_ON;
+    breathing_interrupt_enable();
+}
+
+void breathing_disable(void)
+{
+    printf("breathing_disable()\n");
+    breathing_interrupt_disable();
+    // Restore backlight level
+    backlight_set(get_backlight_level());
+}
+
+void breathing_self_disable(void)
+{
+  if (get_backlight_level() == 0)
+    breathing_halt = BREATHING_HALT_OFF;
+  else
+    breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+  if (is_breathing()){
+    printf("disable breathing\n");
+    breathing_disable();
+  } else {
+    printf("enable breathing\n");
+    breathing_enable();
+  }
+}
+
+void breathing_period_set(uint8_t value)
+{
+  if (!value)
+    value = 1;
+  breathing_period = value;
+}
+
+void breathing_period_default(void) {
+  breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+  breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+  breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+  return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+static void breathing_callback(PWMDriver *pwmp)
+{
+  (void)pwmp;
+  uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS;
+  // resetting after one period to prevent ugly reset at overflow.
+  breathing_counter = (breathing_counter + 1) % (breathing_period * 256);
+  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+  {
+      breathing_interrupt_disable();
+  }
+
+  uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256));
+
+  chSysLockFromISR();
+  pwmEnableChannelI(
+    &PWMD1,
+    0,
+    PWM_FRACTION_TO_WIDTH(
+      &PWMD1,
+      0xFFFF,
+      duty
+    )
+  );
+  chSysUnlockFromISR();
+}
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+      palSetPad(GPIOC, 13);
+    } else {
+    	palClearPad(GPIOC, 13);
+    }
+}

keyboards/cannonkeys/bluepill/led_custom.h

@@ -0,0 +1,6 @@
+#pragma once
+
+void backlight_task(void);
+void breathing_interrupt_disable(void);
+void breathing_interrupt_enable(void);
+bool is_breathing(void);

keyboards/cannonkeys/bluepill/ws2812.c

@@ -1,8 +1,12 @@
-#include "ch.h"
-#include "hal.h"
+/*
+ * LEDDriver.c
+ *
+ *  Created on: Aug 26, 2013
+ *      Author: Omri Iluz
+ */
 
-#include "hsv2rgb.h"
-#include "underglow.h"
+#include "ws2812.h"
+#include "stdlib.h"
 
 #define BYTES_FOR_LED_BYTE 4
 #define NB_COLORS 3
@@ -10,18 +14,17 @@
 #define DATA_SIZE BYTES_FOR_LED*NB_LEDS
 #define RESET_SIZE 200
 #define PREAMBLE_SIZE 4
-
 // Define the spi your LEDs are plugged to here
-#define LEDS_SPI SPID2
+#define WS2812_SPI SPID2
 // Define the number of LEDs you wish to control in your LED strip
-#define NB_LEDS 8
+#define NB_LEDS RGBLED_NUM
 
-#define LED_SPIRAL 1
+ #define LED_SPIRAL 1
 
-static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE];
+ static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE];
 static uint8_t get_protocol_eq(uint8_t data, int pos);
 
-/*
+ /*
  * This lib is meant to be used asynchronously, thus the colors contained in
  * the txbuf will be sent in loop, so that the colors are always the ones you
  * put in the table (the user thus have less to worry about)
@@ -37,38 +40,18 @@ static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
 static THD_FUNCTION(ledsThread, arg) {
   (void) arg;
   while(1){
-    spiSend(&LEDS_SPI, PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE, txbuf);
+    spiSend(&WS2812_SPI, PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE, txbuf);
   }
 }
 
-#if LED_SPIRAL
-/*
- * 'Led spiral' is a simple demo in which we put all the leds to the same
- * color, where this color does all the hsv circle in loop.
- * If you want to launch the thread that will chage the led colors to the
- * appropriate value, simply set LED_SPIRAL to 1.
- */
-static THD_WORKING_AREA(HSVTRANS_WA, 128);
-static THD_FUNCTION(hsv_transThread, arg){
-  (void) arg;
-  hsv_color color = {0, 255, 127};
-  while(1){
-    color.h += 1;
-    color.h %= 256;
-    set_leds_color_hsv(color);
-    chThdSleepMilliseconds(50);
-  }
-}
-#endif
-
-static const SPIConfig spicfg = {
+ static const SPIConfig spicfg = {
   NULL,
-  GPIOB,
-  15,
-  SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us
+  PORT_WS2812,
+  PIN_WS2812,
+  SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us (2.25 MHz)
 };
 
-/*
+ /*
  * Function used to initialize the driver.
  *
  * Starts by shutting off all the LEDs.
@@ -77,21 +60,19 @@ static const SPIConfig spicfg = {
  * txbuff values)
  */
 void leds_init(void){
+  /* MOSI pin*/
+  palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
   for(int i = 0; i < RESET_SIZE; i++)
     txbuf[DATA_SIZE+i] = 0x00;
   for (int i=0; i<PREAMBLE_SIZE; i++)
     txbuf[i] = 0x00;
-  spiAcquireBus(&LEDS_SPI);              /* Acquire ownership of the bus.    */
-  spiStart(&LEDS_SPI, &spicfg);          /* Setup transfer parameters.       */
-  spiSelect(&LEDS_SPI);                  /* Slave Select assertion.          */
+  spiAcquireBus(&WS2812_SPI);              /* Acquire ownership of the bus.    */
+  spiStart(&WS2812_SPI, &spicfg);          /* Setup transfer parameters.       */
+  spiSelect(&WS2812_SPI);                  /* Slave Select assertion.          */
   chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
-#if LED_SPIRAL
-  chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA),
-      NORMALPRIO, hsv_transThread, NULL);
-#endif
 }
 
-/*
+ /*
  * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
  * the ws2812b protocol, we use this helper function to translate bytes into
  * 0s and 1s for the LED (with the appropriate timing).
@@ -109,20 +90,20 @@ static uint8_t get_protocol_eq(uint8_t data, int pos){
   return eq;
 }
 
-/*
- * If you want to set a LED's color in the HSV color space, simply call this
- * function with a hsv_color containing the desired color and the index of the
- * led on the LED strip (starting from 0, the first one being the closest the
- * first plugged to the board)
- *
- * Only set the color of the LEDs through the functions given by this API
- * (unless you really know what you are doing)
- */
-void set_led_color_hsv(hsv_color color, int pos){
-  set_led_color_rgb(hsv2rgb(color), pos);
+
+ void WS2812_init(void) {
+  leds_init();
 }
 
-/*
+ void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
+  uint8_t i = 0;
+  while (i < number_of_leds) {
+    set_led_color_rgb(ledarray[i], i);
+    i++;
+  }
+}
+
+ /*
  * If you want to set a LED's color in the RGB color space, simply call this
  * function with a hsv_color containing the desired color and the index of the
  * led on the LED strip (starting from 0, the first one being the closest the
@@ -131,7 +112,7 @@ void set_led_color_hsv(hsv_color color, int pos){
  * Only set the color of the LEDs through the functions given by this API
  * (unless you really know what you are doing)
  */
-void set_led_color_rgb(rgb_color color, int pos){
+void set_led_color_rgb(LED_TYPE color, int pos){
   for(int j = 0; j < 4; j++)
     txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
   for(int j = 0; j < 4; j++)
@@ -140,18 +121,12 @@ void set_led_color_rgb(rgb_color color, int pos){
     txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
 }
 
-/*
- * Same as the two above, but sets all the LEDs in the LED strip (HSV)
- */
-void set_leds_color_hsv(hsv_color color){
-  for(int i = 0; i < NB_LEDS; i++)
-    set_led_color_hsv(color, i);
-}
-
-/*
- * Same as the two above, but sets all the LEDs in the LED strip (RGB)
- */
-void set_leds_color_rgb(rgb_color color){
+ void set_leds_color_rgb(LED_TYPE color){
   for(int i = 0; i < NB_LEDS; i++)
     set_led_color_rgb(color, i);
-}
+}
+
+
+ void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds) {
+
+ }

keyboards/cannonkeys/bluepill/ws2812.h

@@ -0,0 +1,20 @@
+#pragma once
+
+#include "hal.h"
+#include "rgblight_types.h"
+
+
+void set_leds_color_rgb(LED_TYPE color);
+void set_led_color_rgb(LED_TYPE color, int pos);
+void leds_init(void);
+
+
+ // This is what users will use to interface with this
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
+void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
+
+
+void WS2812_init(void);
+void WS2812_set_color( uint8_t index, uint8_t red, uint8_t green, uint8_t blue );
+void WS2812_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void WS2812_send_colors(void);

keyboards/cannonkeys/ortho48/bootloader_defs.h

@@ -7,4 +7,4 @@
 
 // STM32F103* does NOT have an USB bootloader in ROM (only serial),
 //  so setting anything here does not make much sense
-// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
+#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/ortho48/config.h

@@ -0,0 +1,80 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0x0248
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER QMK
+#define PRODUCT Ortho48
+#define DESCRIPTION Ortho48
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, B14, A15, A0, C15, C14}
+#define MATRIX_ROW_PINS { B12, C13, A2, A1 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 9
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
+
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/ortho48/halconf.h

@@ -111,7 +111,7 @@
  * @brief   Enables the PWM subsystem.
  */
 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
+#define HAL_USE_PWM                 TRUE
 #endif
 
 /**

keyboards/cannonkeys/ortho48/info.json

@@ -0,0 +1,112 @@
+{
+  "keyboard_name": "Ortho48",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 12,
+  "height": 4,
+  "layouts": {
+    "LAYOUT_ortho_4x12": {
+      "layout": [
+        {"label":"Tab", "x":0, "y":0},
+        {"label":"Q", "x":1, "y":0},
+        {"label":"W", "x":2, "y":0},
+        {"label":"E", "x":3, "y":0},
+        {"label":"R", "x":4, "y":0},
+        {"label":"T", "x":5, "y":0},
+        {"label":"Y", "x":6, "y":0},
+        {"label":"U", "x":7, "y":0},
+        {"label":"I", "x":8, "y":0},
+        {"label":"O", "x":9, "y":0},
+        {"label":"P", "x":10, "y":0},
+        {"label":"Delete", "x":11, "y":0},
+        {"label":"Esc", "x":0, "y":1},
+        {"label":"A", "x":1, "y":1},
+        {"label":"S", "x":2, "y":1},
+        {"label":"D", "x":3, "y":1},
+        {"label":"F", "x":4, "y":1},
+        {"label":"G", "x":5, "y":1},
+        {"label":"H", "x":6, "y":1},
+        {"label":"J", "x":7, "y":1},
+        {"label":"K", "x":8, "y":1},
+        {"label":"L", "x":9, "y":1},
+        {"label":";", "x":10, "y":1},
+        {"label":"'", "x":11, "y":1},
+        {"label":"Shift", "x":0, "y":2},
+        {"label":"Z", "x":1, "y":2},
+        {"label":"X", "x":2, "y":2},
+        {"label":"C", "x":3, "y":2},
+        {"label":"V", "x":4, "y":2},
+        {"label":"B", "x":5, "y":2},
+        {"label":"N", "x":6, "y":2},
+        {"label":"M", "x":7, "y":2},
+        {"label":",", "x":8, "y":2},
+        {"label":".", "x":9, "y":2},
+        {"label":"/", "x":10, "y":2},
+        {"label":"Enter", "x":11, "y":2},
+        {"label":"Fn", "x":0, "y":3},
+        {"label":"Ctrl", "x":1, "y":3},
+        {"label":"Alt", "x":2, "y":3},
+        {"label":"Meta", "x":3, "y":3},
+        {"label":"Lower", "x":4, "y":3},
+        {"label":"Space", "x":5, "y":3},
+        {"label":"Space", "x":6, "y":3},
+        {"label":"Raise", "x":7, "y":3},
+        {"label":"Left", "x":8, "y":3},
+        {"label":"Down", "x":9, "y":3},
+        {"label":"Up", "x":10, "y":3},
+        {"label":"Right", "x":11, "y":3}
+      ]
+    },
+    "LAYOUT_1x2uC": {
+      "layout": [
+        {"label":"Tab", "x":0, "y":0},
+        {"label":"Q", "x":1, "y":0},
+        {"label":"W", "x":2, "y":0},
+        {"label":"E", "x":3, "y":0},
+        {"label":"R", "x":4, "y":0},
+        {"label":"T", "x":5, "y":0},
+        {"label":"Y", "x":6, "y":0},
+        {"label":"U", "x":7, "y":0},
+        {"label":"I", "x":8, "y":0},
+        {"label":"O", "x":9, "y":0},
+        {"label":"P", "x":10, "y":0},
+        {"label":"Delete", "x":11, "y":0},
+        {"label":"Esc", "x":0, "y":1},
+        {"label":"A", "x":1, "y":1},
+        {"label":"S", "x":2, "y":1},
+        {"label":"D", "x":3, "y":1},
+        {"label":"F", "x":4, "y":1},
+        {"label":"G", "x":5, "y":1},
+        {"label":"H", "x":6, "y":1},
+        {"label":"J", "x":7, "y":1},
+        {"label":"K", "x":8, "y":1},
+        {"label":"L", "x":9, "y":1},
+        {"label":";", "x":10, "y":1},
+        {"label":"'", "x":11, "y":1},
+        {"label":"Shift", "x":0, "y":2},
+        {"label":"Z", "x":1, "y":2},
+        {"label":"X", "x":2, "y":2},
+        {"label":"C", "x":3, "y":2},
+        {"label":"V", "x":4, "y":2},
+        {"label":"B", "x":5, "y":2},
+        {"label":"N", "x":6, "y":2},
+        {"label":"M", "x":7, "y":2},
+        {"label":",", "x":8, "y":2},
+        {"label":".", "x":9, "y":2},
+        {"label":"/", "x":10, "y":2},
+        {"label":"Enter", "x":11, "y":2},
+        {"label":"Fn", "x":0, "y":3},
+        {"label":"Ctrl", "x":1, "y":3},
+        {"label":"Alt", "x":2, "y":3},
+        {"label":"Meta", "x":3, "y":3},
+        {"label":"Lower", "x":4, "y":3},
+        {"label":"Space", "x":5, "y":3, "w":2},
+        {"label":"Raise", "x":7, "y":3},
+        {"label":"Left", "x":8, "y":3},
+        {"label":"Down", "x":9, "y":3},
+        {"label":"Up", "x":10, "y":3},
+        {"label":"Right", "x":11, "y":3}
+      ]
+    }
+  }
+}

keyboards/cannonkeys/ortho48/keymaps/default/keymap.c

@@ -0,0 +1,89 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _RAISE 1
+#define _LOWER 2
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_BASE] = LAYOUT_ortho_4x12(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    BL_TOGG, KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER),   KC_SPC,  KC_SPC,  MO(_RAISE),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_ortho_4x12(
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+    RESET,   _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_ortho_4x12(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+    RGB_TOG, RGB_MOD, BL_INC,  BL_DEC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+};

keyboards/cannonkeys/ortho48/mcuconf.h

@@ -132,7 +132,7 @@
  * PWM driver system settings.
  */
 #define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM1                  TRUE
 #define STM32_PWM_USE_TIM2                  FALSE
 #define STM32_PWM_USE_TIM3                  FALSE
 #define STM32_PWM_USE_TIM4                  FALSE

keyboards/cannonkeys/ortho48/ortho48.c

@@ -0,0 +1,3 @@
+
+#include "ortho48.h"
+

keyboards/cannonkeys/ortho48/ortho48.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_1x2uC( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+    k30, k31, k32, k33, k34,   k35   , k37, k38, k39, k3a, k3b \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+    { k30, k31, k32, k33, k34, k35, KC_NO, k37, k38, k39, k3a, k3b } \
+}
+
+#define LAYOUT_ortho_4x12( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
+}

keyboards/cannonkeys/ortho48/readme.md

@@ -0,0 +1,12 @@
+# Ortho 48
+
+A Blue Pill STM32F103C8T6-based 12x4 ortholinear keyboard.
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1)  
+Hardware Supported: Blue Pill STM32F103C8T6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/ortho48:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/ortho48/rules.mk

@@ -1,7 +1,7 @@
 # project specific files
+VPATH += keyboards/cannonkeys/bluepill
 SRC =	led.c \
-		  underglow.c \
-		  hsv2rgb.c
+      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
@@ -50,7 +50,6 @@ COMMAND_ENABLE = yes    # Commands for debug and configuration
 SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes	    # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes
 
-LAYOUTS = 60_ansi
-
-DEFAULT_FOLDER = handwired/practice60
+LAYOUTS = ortho_4x12

keyboards/cannonkeys/ortho60/bootloader_defs.h

@@ -7,4 +7,4 @@
 
 // STM32F103* does NOT have an USB bootloader in ROM (only serial),
 //  so setting anything here does not make much sense
-// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
+#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/ortho60/config.h

@@ -35,7 +35,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
 #define DIODE_DIRECTION COL2ROW
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
 
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
@@ -48,6 +50,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 16
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
+
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/cannonkeys/ortho60/halconf.h

@@ -111,7 +111,7 @@
  * @brief   Enables the PWM subsystem.
  */
 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
+#define HAL_USE_PWM                 TRUE
 #endif
 
 /**

keyboards/cannonkeys/ortho60/keymaps/default/keymap.c

@@ -52,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,  \
   KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  \
-  BL_TOGG, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+  BL_TOGG, KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER),   KC_SPC,  KC_SPC,  MO(_RAISE),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
 ),
 /* Lower
  * ,-----------------------------------------------------------------------------------.
@@ -72,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+  RESET,   _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
 ),
 
 /* Raise
@@ -93,6 +93,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+  RGB_TOG, RGB_MOD, BL_INC,  BL_DEC,  _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
 )
 };

keyboards/cannonkeys/ortho60/mcuconf.h

@@ -132,7 +132,7 @@
  * PWM driver system settings.
  */
 #define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM1                  TRUE
 #define STM32_PWM_USE_TIM2                  FALSE
 #define STM32_PWM_USE_TIM3                  FALSE
 #define STM32_PWM_USE_TIM4                  FALSE

keyboards/cannonkeys/ortho60/ortho60.c

@@ -0,0 +1,3 @@
+
+#include "ortho60.h"
+

keyboards/cannonkeys/ortho60/readme.md

@@ -7,6 +7,6 @@ Hardware Supported: Blue Pill STM32F103C8T6
 
 Make example for this keyboard (after setting up your build environment):
 
-    make handwired/ortho60:default
+    make cannonkeys/ortho60:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/ortho60/rules.mk

@@ -1,7 +1,7 @@
 # project specific files
+VPATH += keyboards/cannonkeys/bluepill
 SRC =	led.c \
-		  underglow.c \
-		  hsv2rgb.c
+      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
@@ -50,5 +50,6 @@ COMMAND_ENABLE = yes    # Commands for debug and configuration
 SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes	    # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes
 
 LAYOUTS = ortho_5x12

keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.c

@@ -0,0 +1,56 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+// Value to place in RTC backup register 10 for persistent bootloader mode
+#define RTC_BOOTLOADER_FLAG 0x424C
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+   //JTAG-DP Disabled and SW-DP Enabled
+   AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
+   //Set backup register DR10 to enter bootloader on reset
+   BKP->DR10 = RTC_BOOTLOADER_FLAG;
+}

keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.h

@@ -0,0 +1,166 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME              "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOA_LED               8
+#define GPIOD_OSC_IN            0
+#define GPIOD_OSC_OUT           1
+
+/* In case your board has a "USB enable" hardware
+   controlled by a pin, define it here. (It could be just
+   a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC          10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA9  - Alternate output  (USART1 TX).
+ * PA10 - Normal input      (USART1 RX).
+ */
+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10    - Push Pull output  (USB switch).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13    - Push Pull output  (LED).
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+   have a 1.5k resistor connected on one end to the D+ line
+   and on the other end to some pin. Or even a slightly more
+   complicated "USB enable" circuit, controlled by a pin.
+   That should go here.
+
+   However on some boards (e.g. one that I have), there's no
+   such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */

keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103

keyboards/cannonkeys/practice60/bootloader_defs.h

@@ -0,0 +1,10 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+
+// STM32F103* does NOT have an USB bootloader in ROM (only serial),
+//  so setting anything here does not make much sense
+#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/practice60/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/practice60/config.h

@@ -35,7 +35,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
 #define DIODE_DIRECTION COL2ROW
 
-#define BACKLIGHT_LEVELS 1
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
 
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
@@ -48,6 +50,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 9
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
+
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/cannonkeys/practice60/halconf.h

@@ -0,0 +1,353 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/cannonkeys/practice60/keymaps/default/keymap.c

@@ -32,16 +32,16 @@ enum custom_keycodes {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_BASE] = LAYOUT_60_ansi(
     KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                 KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC, \
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    MT(MOD_LSFT, KC_Y),   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, \
     KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                 KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,  \
     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,                 KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT, \
     KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                          KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL
   ),
 
   [_FN1] = LAYOUT_60_ansi(
-    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC, \
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, \
     RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______, \
+    BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______, \
     BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, \
     KC_GRV,  _______, _______,                            _______,                            _______, _______, _______, _______
   )

keyboards/cannonkeys/practice60/ld/MKL26Z64.ld

@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+  flash0   : org = 0x00000000, len = 0x100
+  flash1   : org = 0x00000400, len = 0x10
+  flash2   : org = 0x00000410, len = 62k - 0x410
+  flash3   : org = 0x0000F800, len = 2k
+  flash4   : org = 0x00000000, len = 0
+  flash5   : org = 0x00000000, len = 0
+  flash6   : org = 0x00000000, len = 0
+  flash7   : org = 0x00000000, len = 0
+  ram0     : org = 0x1FFFF800, len = 8k
+  ram1     : org = 0x00000000, len = 0
+  ram2     : org = 0x00000000, len = 0
+  ram3     : org = 0x00000000, len = 0
+  ram4     : org = 0x00000000, len = 0
+  ram5     : org = 0x00000000, len = 0
+  ram6     : org = 0x00000000, len = 0
+  ram7     : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+  .cfmprotect : ALIGN(4) SUBALIGN(4)
+  {
+    KEEP(*(.cfmconfig))
+  } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__  = LENGTH(flash3);
+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld