Relocate usb_detach to utils (#5121)

* Relocate usb_detach to utils

* Relocate usb_detach to utils - fix up files after move

.clang-format

@@ -0,0 +1,26 @@
+---
+BasedOnStyle: Google
+AlignAfterOpenBracket: Align
+AlignConsecutiveAssignments: 'true'
+AlignConsecutiveDeclarations: 'true'
+AlignOperands: 'true'
+AllowAllParametersOfDeclarationOnNextLine: 'false'
+AlwaysBreakAfterDefinitionReturnType: None
+AlwaysBreakAfterReturnType: None
+AlwaysBreakBeforeMultilineStrings: 'false'
+BinPackArguments: 'true'
+BinPackParameters: 'true'
+ColumnLimit: '1000'
+IndentCaseLabels: 'true'
+IndentPPDirectives: AfterHash
+IndentWidth: '2'
+MaxEmptyLinesToKeep: '1'
+PointerAlignment: Right
+SortIncludes: 'false'
+SpaceBeforeAssignmentOperators: 'true'
+SpaceBeforeParens: ControlStatements
+SpaceInEmptyParentheses: 'false'
+TabWidth: '2'
+UseTab: Never
+
+...

.github/ISSUE_TEMPLATE/bug_report.md

@@ -2,30 +2,31 @@
 name: Bug report
 about: Create a report to help us improve the QMK Firmware
 ---
-<!-- Provide a general summary of the bug in the Title above -->
+<!-- Provide a general summary of the bug in the title above. -->
 
-<!-- This template is entirely option and can be removed, but is here to help both you and us. -->
-<!-- This text and anything on lines wrapped like this one will not show up in the final text. This text is to help us and you. -->
+<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
 
-**Describe the bug**
+## Describe the Bug
 
 <!-- A clear and concise description of what the bug is. -->
 
-**System Information**
+## System Information
+
  - Keyboard:  
    - Revision (if applicable):  
- - Operating System:
- - avr-gcc version: 
-<!-- Run `avr-gcc --version` to find out -->
- - arm gcc version: 
-<!-- Run `arm-none-eabi-gcc --version` to find out -->
+ - Operating system:
+ - AVR GCC version: 
+<!-- Run `avr-gcc --version` to find this out. -->
+ - ARM GCC version: 
+<!-- Run `arm-none-eabi-gcc --version` to find this out. -->
  - QMK Firmware version:
-<!-- You can run `git describe --abbrev=0 --tags` to find this out -->
+<!-- Run `git describe --abbrev=0 --tags` to find this out. -->
  - Any keyboard related software installed? 
-   - [ ] Auto Hot Key
+   - [ ] AutoHotKey
    - [ ] Karabiner
-   - [ ] Other
+   - [ ] Other:
 
-**Additional context**
+## Additional Context
 
-<!-- Add any other context about the problem here. --> 
+<!-- Add any other relevant information about the problem here. -->

.github/ISSUE_TEMPLATE/feature_request.md

@@ -2,18 +2,18 @@
 name: Feature request
 about: Suggest a new feature or changes to existing features 
 ---
-<!--- Provide a general summary of the changes you want in the Title above -->
+<!--- Provide a general summary of the changes you want in the title above. -->
 
-<!-- This template is entirely option and can be removed, but is here to help both you and us. -->
-<!-- This text and anything on lines wrapped like this one will not show up in the final text. This text is to help us and you. -->
+<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
 
 ## Feature Request Type
 
-- [ ] Core Functionality
-- [ ] Add-on hardware support (e.g. audio, RGB, OLED screen, etc.)
-- [ ] Alteration (enhancement/optimization) of existing Feature(s)
+- [ ] Core functionality
+- [ ] Add-on hardware support (eg. audio, RGB, OLED screen, etc.)
+- [ ] Alteration (enhancement/optimization) of existing feature(s)
 - [ ] New behavior
 
-## Description 
+## Description
 
-<!-- A few sentences describing what it is that you'd like to see. Additional information (such as links to spec sheets, licensing info, other related issues or PR's, etc) would be helpful. -->
+<!-- A few sentences describing what it is that you'd like to see in QMK. Additional information (such as links to spec sheets, licensing info, other related issues or PRs, etc) would be helpful. -->

.github/ISSUE_TEMPLATE/other_issues.md

@@ -2,8 +2,8 @@
 name: Other issues
 about: Anything else that doesn't fall into the above categories. 
 ---
-<!--- Provide a general summary of the changes you want in the Title above -->
+<!--- Provide a general summary of the changes you want in the title above. -->
 
-<!-- This text and anything on lines wrapped like this one will not show up in the final text. This text is to help us and you. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
 
-<!-- Please check https://docs.qmk.fm/#/support for additional resources first. If that doesn't answer your question, check the bug report option, as that may be more appropriate. -->
+<!-- Please check https://docs.qmk.fm/#/support for additional resources first. If that doesn't answer your question, choose the bug report template instead, as that may be more appropriate. -->

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,32 +1,34 @@
-<!--- Provide a general summary of your changes in the Title above -->
+<!--- Provide a general summary of your changes in the title above. -->
 
-<!--- This template is entirely option and can be removed, but is here to help both you and us. -->
-<!--- This text and anything on lines wrapped like this one will not show up in the final text. This text is to help us and you. -->
+<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
+<!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
 
 ## Description
-<!--- Describe your changes in detail -->
 
-## Types of changes
-<!--- What types of changes does your code introduce? Put an `x` in all the boxes that apply: -->
+<!--- Describe your changes in detail here. -->
+
+## Types of Changes
+
+<!--- What types of changes does your code introduce? Put an `x` in all the boxes that apply. -->
 - [ ] Core
 - [ ] Bugfix
-- [ ] New Feature
-- [ ] Enhancement/Optimization
+- [ ] New feature
+- [ ] Enhancement/optimization
 - [ ] Keyboard (addition or update)
-- [ ] Keymap/Layout/Userspace (addition or update)
+- [ ] Keymap/layout/userspace (addition or update)
 - [ ] Documentation
 
-
-## Issues Fixed or Closed by this PR
+## Issues Fixed or Closed by This PR
 
 * 
 
-## Checklist:
+## Checklist
+
 <!--- Go over all the following points, and put an `x` in all the boxes that apply. -->
 <!--- If you're unsure about any of these, don't hesitate to ask. We're here to help! -->
 - [ ] My code follows the code style of this project.
 - [ ] My change requires a change to the documentation.
 - [ ] I have updated the documentation accordingly.
-- [ ] I have read the **CONTRIBUTING** document. (https://docs.qmk.fm/#/contributing)
+- [ ] I have read the [**CONTRIBUTING** document](https://docs.qmk.fm/#/contributing).
 - [ ] I have added tests to cover my changes.
 - [ ] I have tested the changes and verified that they work and don't break anything (as well as I can manage).

.gitignore

@@ -1,3 +1,4 @@
+.history/
 .dep
 *.o
 *.bin

.travis.yml

@@ -20,7 +20,7 @@ before_script:
   - avr-gcc --version
 script:
 - git rev-parse --short HEAD
-- make test:all AUTOGEN=false
+- make test:all
 - bash util/travis_build.sh
 - bash util/travis_docs.sh
 addons:

build_keyboard.mk

@@ -135,6 +135,10 @@ ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
     OPT_DEFS += -DCONVERT_TO_PROTON_C
 endif
 
+ifneq ($(FORCE_LAYOUT),)
+    TARGET := $(TARGET)_$(FORCE_LAYOUT)
+endif
+
 include quantum/mcu_selection.mk
 
 ifdef MCU_FAMILY
@@ -371,4 +375,5 @@ all: build check-size
 build: elf cpfirmware
 check-size: build
 
+include show_options.mk
 include $(TMK_PATH)/rules.mk

build_layout.mk

@@ -15,4 +15,13 @@ define SEARCH_LAYOUTS
     $$(foreach LAYOUTS_REPO,$$(LAYOUTS_REPOS),$$(eval $$(call SEARCH_LAYOUTS_REPO)))
 endef
 
+ifneq ($(FORCE_LAYOUT),)
+    ifneq (,$(findstring $(FORCE_LAYOUT),$(LAYOUTS)))
+        $(info Forcing layout: $(FORCE_LAYOUT))
+        LAYOUTS := $(FORCE_LAYOUT)
+    else
+        $(error Forced layout does not exist)
+    endif
+endif
+
 $(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))

common_features.mk

@@ -114,8 +114,27 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
-RGB_MATRIX_ENABLE ?= no
 VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
+
+LED_MATRIX_ENABLE ?= no
+ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
+    ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
+        $(error LED_MATRIX_ENABLE="$(LED_MATRIX_ENABLE)" is not a valid matrix type)
+    else
+        OPT_DEFS += -DLED_MATRIX_ENABLE -DBACKLIGHT_ENABLE -DBACKLIGHT_CUSTOM_DRIVER
+        SRC += $(QUANTUM_DIR)/led_matrix.c
+        SRC += $(QUANTUM_DIR)/led_matrix_drivers.c
+    endif
+endif
+
+ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
+    OPT_DEFS += -DIS31FL3731
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3731-simple.c
+    SRC += i2c_master.c
+endif
+
+RGB_MATRIX_ENABLE ?= no
 ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
 ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
     $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
@@ -191,7 +210,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
         CIE1931_CURVE = yes
     endif
-        ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+    ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
     endif
 endif
@@ -227,11 +246,21 @@ endif
 
 ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L)
     COMMON_VPATH += $(DRIVER_PATH)/haptic
+    SRC += haptic.c
     SRC += DRV2605L.c
     SRC += i2c_master.c
+    OPT_DEFS += -DHAPTIC_ENABLE
     OPT_DEFS += -DDRV2605L
 endif
 
+ifeq ($(strip $(HAPTIC_ENABLE)), SOLENOID)
+    COMMON_VPATH += $(DRIVER_PATH)/haptic
+    SRC += haptic.c
+    SRC += solenoid.c
+    OPT_DEFS += -DHAPTIC_ENABLE
+    OPT_DEFS += -DSOLENOID_ENABLE
+endif
+
 ifeq ($(strip $(HD44780_ENABLE)), yes)
     SRC += drivers/avr/hd44780.c
     OPT_DEFS += -DHD44780_ENABLE
@@ -263,10 +292,20 @@ ifneq ($(strip $(CUSTOM_MATRIX)), yes)
     endif
 endif
 
-# Include the standard debounce code if needed
-ifneq ($(strip $(CUSTOM_DEBOUNCE)), yes)
-    QUANTUM_SRC += $(QUANTUM_DIR)/debounce.c
+DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
+# Debounce Modules. If implemented in matrix.c, don't use these.
+DEBOUNCE_TYPE?= sym_g
+VALID_DEBOUNCE_TYPES := sym_g eager_pk custom
+ifeq ($(filter $(DEBOUNCE_TYPE),$(VALID_DEBOUNCE_TYPES)),)
+    $(error DEBOUNCE_TYPE="$(DEBOUNCE_TYPE)" is not a valid debounce algorithm)
 endif
+ifeq ($(strip $(DEBOUNCE_TYPE)), sym_g)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_sym_g.c
+else ifeq ($(strip $(DEBOUNCE_TYPE)), eager_pk)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_eager_pk.c
+endif
+
+
 
 ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
     OPT_DEFS += -DSPLIT_KEYBOARD

docs/_summary.md

@@ -40,6 +40,7 @@
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
   * [Configurator Support](reference_configurator_support.md)
+  * [info.json Format](reference_info_json.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)

docs/contributing.md

@@ -91,6 +91,18 @@ int foo(void) {
 }
 ```
 
+# Auto-formatting with clang-format
+
+[Clang-format](https://clang.llvm.org/docs/ClangFormat.html) is part of LLVM and can automatically format your code for you, because ain't nobody got time to do it manually. We supply a configuration file for it that applies most of the coding conventions listed above. It will only change whitespace and newlines, so you will still have to remember to include optional braces yourself.
+
+Use the [full LLVM installer](http://llvm.org/builds/) to get clang-format on Windows, or use `sudo apt install clang-format` on Ubuntu.
+
+If you run it from the command-line, pass `-style=file` as an option and it will automatically find the .clang-format configuration file in the QMK root directory.
+
+If you use VSCode, the standard C/C++ plugin supports clang-format, alternatively there is a [separate extension](https://marketplace.visualstudio.com/items?itemName=LLVMExtensions.ClangFormat) for it.
+
+Some things (like LAYOUT macros) are destroyed by clang-format, so either don't run it on those files, or wrap the sensitive code in `// clang-format off` and `// clang-format on`.
+
 # General Guidelines
 
 We have a few different types of changes in QMK, each requiring a different level of rigor. We'd like you to keep the following guidelines in mind no matter what type of change you're making.

docs/custom_quantum_functions.md

@@ -165,18 +165,35 @@ In addition, it is possible to specify the brightness level of all LEDs with `er
 
 Ergodox boards also define `LED_BRIGHTNESS_LO` for the lowest brightness and `LED_BRIGHTNESS_HI` for the highest brightness (which is the default).
 
-# Matrix Initialization Code
+# Keyboard Initialization Code
 
-Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LEDs or i²c controllers you will need to set up that hardware before it can be used.
+There are several steps in the keyboard initialization process.  Depending on what you want to do, it will influence which function you should use.
 
+These are the three main initialization functions, listed in the order that they're called.
 
-### Example `matrix_init_user()` Implementation
+* `keyboard_pre_init_*` - Happens before most anything is started. Good for hardware setup that you want running very early.
+* `matrix_init_*` - Happens midway through the firmware's startup process. Hardware is initialized, but features may not be yet.
+* `keyboard_post_init_*` - Happens at the end of the firmware's startup process. This is where you'd want to put "customization" code, for the most part.
+
+!> For most people, the `keyboard_post_init_user` function is what you want to call.  For instance, this is where you want to set up things for RGB Underglow.
+
+## Keyboard Pre Initialization code
+
+This runs very early during startup, even before the USB has been started. 
+
+Shortly after this, the matrix is initialized.
+
+For most users, this shouldn't be used, as it's primarily for hardware oriented initialization. 
+
+However, if you have hardware stuff that you need initialized, this is the best place for it (such as initializing LED pins).
+
+### Example `keyboard_pre_init_user()` Implementation
 
 This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
 
 ```c
-void matrix_init_user(void) {
-  // Call the keymap level matrix init.
+void keyboard_pre_init_user(void) {
+  // Call the keyboard pre init code.
 
   // Set our LED pins as output
   DDRB |= (1<<1);
@@ -185,11 +202,47 @@ void matrix_init_user(void) {
 }
 ```
 
+### `keyboard_pre_init_*` Function Documentation
+
+* Keyboard/Revision: `void keyboard_pre_init_kb(void)`
+* Keymap: `void keyboard_pre_init_user(void)`
+
+## Matrix Initialization Code
+
+This is called when the matrix is initialized, and after some of the hardware has been set up, but before many of the features have been initialized. 
+
+This is useful for setting up stuff that you may need elsewhere, but isn't hardware related nor is dependant on where it's started. 
+
+
 ### `matrix_init_*` Function Documentation
 
 * Keyboard/Revision: `void matrix_init_kb(void)`
 * Keymap: `void matrix_init_user(void)`
 
+
+## Keyboard Post Initialization code
+
+This is ran as the very last task in the keyboard initialization process. This is useful if you want to make changes to certain features, as they should be initialized by this point.
+
+
+### Example `keyboard_post_init_user()` Implementation
+
+This example, running after everything else has initialized, sets up the rgb underglow configuration.
+
+```c
+void keyboard_post_init_user(void) {
+  // Call the post init code.
+  rgblight_enable_noeeprom(); // enables Rgb, without saving settings
+  rgblight_sethsv_noeeprom(180, 255, 255): // sets the color to teal/cyan without saving
+  rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3); // sets mode to Fast breathing without saving
+}
+```
+
+### `keyboard_post_init_*` Function Documentation
+
+* Keyboard/Revision: `void keyboard_post_init_kb(void)`
+* Keymap: `void keyboard_post_init_user(void)`
+
 # Matrix Scanning Code
 
 Whenever possible you should customize your keyboard by using `process_record_*()` and hooking into events that way, to ensure that your code does not have a negative performance impact on your keyboard. However, in rare cases it is necessary to hook into the matrix scanning. Be extremely careful with the performance of code in these functions, as it will be called at least 10 times per second.
@@ -229,10 +282,9 @@ void suspend_wakeup_init_user(void)
 {
     rgb_matrix_set_suspend_state(false);
 }
-
 ```
 
-### `keyboard_init_*` Function Documentation
+### Keyboard suspend/wake  Function Documentation
 
 * Keyboard/Revision: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
 * Keymap: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
@@ -285,7 +337,7 @@ Keep in mind that EEPROM has a limited number of writes. While this is very high
 
 * If you don't understand the example, then you may want to avoid using this feature, as it is rather complicated. 
 
-### Example  Implementation
+### Example Implementation
 
 This is an example of how to add settings, and read and write it. We're using the user keymap for the example here.  This is a complex function, and has a lot going on.  In fact, it uses a lot of the above functions to work! 
 

docs/faq_build.md

@@ -37,13 +37,17 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
 
+### Serial device is not detected in bootloader mode on Linux
+Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
+Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
+
 ## Unknown Device for DFU Bootloader
 
-If you're using Windows to flash your keyboard, and you are running into issues, check the Device Manager.  If you see an "Unknown Device" when the keyboard is in "bootloader mode", then you may have a driver issue. 
+If you're using Windows to flash your keyboard, and you are running into issues, check the Device Manager.  If you see an "Unknown Device" when the keyboard is in "bootloader mode", then you may have a driver issue.
 
-Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue. 
+Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue.
 
-If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUS(libusb-1.0)` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again. 
+If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUS(libusb-1.0)` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again.
 
 ## WINAVR is Obsolete
 It is no longer recommended and may cause some problem.
@@ -98,9 +102,9 @@ OPT_DEFS += -DBOOTLOADER_SIZE=2048
 ```
 
 ## `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` on MacOS
-This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled. 
+This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled.
 
-The solution is to remove and reinstall all affected modules. 
+The solution is to remove and reinstall all affected modules.
 
 ```
 brew rm avr-gcc
@@ -128,3 +132,11 @@ brew uninstall --force avr-gcc
 brew install avr-gcc@7
 brew link --force avr-gcc@7
 ```
+
+### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019)
+Due to how EEPROM works on ARM based chips, saved settings may no longer be valid.  This affects the default layers, and *may*, under certain circumstances we are still figuring out, make the keyboard unusable.  Resetting the EEPROM will correct this.
+
+[Planck rev6 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/539284620861243409/planck_rev6_default.bin) can be used to force an eeprom reset. After flashing this image, flash your normal firmware again which should restore your keyboard to _normal_ working order.
+[Preonic rev3 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/537849497313738762/preonic_rev3_default.bin)
+
+If bootmagic is enabled in any form, you should be able to do this too (see [Bootmagic docs](feature_bootmagic.md) and keyboard info for specifics on how to do this).

docs/feature_advanced_keycodes.md

@@ -21,7 +21,7 @@ Additionally, if at least one right-handed modifier is specified in a Mod Tap or
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers) When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers). When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
@@ -146,7 +146,7 @@ Additionally, hitting keys five times in a short period will lock that key. This
 You can control the behavior of one shot keys by defining these in `config.h`:
 
 ```c
-#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped this number of times again. */
+#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped once again. */
 #define ONESHOT_TIMEOUT 5000  /* Time (in ms) before the one shot key is released */
 ```
 

docs/feature_bootmagic.md

@@ -127,7 +127,9 @@ Additionally, you may want to specify which key to use.  This is especially usef
 
 By default, these are set to 0 and 0, which is usually the "ESC" key on a majority of keyboards.
 
-And to trigger the bootloader, you hold this key down when plugging the keyboard in. Just the single key. 
+And to trigger the bootloader, you hold this key down when plugging the keyboard in. Just the single key.
+
+!> Using bootmagic lite will **always reset** the EEPROM, so you will lose any settings that have been saved.
 
 ## Advanced Bootmagic Lite
 

docs/feature_combo.md

@@ -29,7 +29,7 @@ If you want to add a list, then you'd use something like this:
 enum combos {
   AB_ESC,
   JK_TAB
-}
+};
 const uint16_t PROGMEM ab_combo[] = {KC_A, KC_B, COMBO_END};
 const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END};
 

docs/feature_command.md

@@ -29,9 +29,10 @@ If you would like to change the key assignments for Command, `#define` these in
 |`MAGIC_KEY_CONSOLE`                 |`C`                                                                        |Enable the Command console                      |
 |`MAGIC_KEY_VERSION`                 |`V`                                                                        |Print the running QMK version to the console    |
 |`MAGIC_KEY_STATUS`                  |`S`                                                                        |Print the current keyboard status to the console|
-|`MAGIC_KEY_HELP1`                   |`H`                                                                        |Print Command help to the console               |
-|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                    |Print Command help to the console (alternate)   |
+|`MAGIC_KEY_HELP`                    |`H`                                                                        |Print Command help to the console               |
+|`MAGIC_KEY_HELP_ALT`                |`SLASH`                                                                    |Print Command help to the console (alternate)   |
 |`MAGIC_KEY_LAYER0`                  |`0`                                                                        |Make layer 0 the default layer                  |
+|`MAGIC_KEY_LAYER0_ALT`              |`GRAVE`                                                                    |Make layer 0 the default layer (alternate)      |
 |`MAGIC_KEY_LAYER1`                  |`1`                                                                        |Make layer 1 the default layer                  |
 |`MAGIC_KEY_LAYER2`                  |`2`                                                                        |Make layer 2 the default layer                  |
 |`MAGIC_KEY_LAYER3`                  |`3`                                                                        |Make layer 3 the default layer                  |
@@ -41,10 +42,10 @@ If you would like to change the key assignments for Command, `#define` these in
 |`MAGIC_KEY_LAYER7`                  |`7`                                                                        |Make layer 7 the default layer                  |
 |`MAGIC_KEY_LAYER8`                  |`8`                                                                        |Make layer 8 the default layer                  |
 |`MAGIC_KEY_LAYER9`                  |`9`                                                                        |Make layer 9 the default layer                  |
-|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                      |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                    |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                    |Enter the bootloader                            |
+|`MAGIC_KEY_BOOTLOADER`              |`B`                                                                        |Jump to bootloader                              |
+|`MAGIC_KEY_BOOTLOADER_ALT`          |`ESC`                                                                      |Jump to bootloader (alternate)                  |
 |`MAGIC_KEY_LOCK`                    |`CAPS`                                                                     |Lock the keyboard so nothing can be typed       |
-|`MAGIC_KEY_EEPROM`                  |`E`                                                                        |Clear the EEPROM                                |
+|`MAGIC_KEY_EEPROM`                  |`E`                                                                        |Print stored EEPROM config to the console       |
+|`MAGIC_KEY_EEPROM_CLEAR`            |`BSPACE`                                                                   |Clear the EEPROM                                |
 |`MAGIC_KEY_NKRO`                    |`N`                                                                        |Toggle N-Key Rollover (NKRO)                    |
 |`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                        |Toggle LED when computer is sleeping            |

docs/feature_debounce_type.md

@@ -0,0 +1,46 @@
+# Debounce algorithm
+
+QMK supports multiple debounce algorithms through its debounce API.
+
+The underlying debounce algorithm is determined by which matrix.c file you are using.
+
+The logic for which debounce method called is below. It checks various defines that you have set in rules.mk
+
+```
+DEBOUNCE_TYPE?= sym_g
+VALID_DEBOUNCE_TYPES := sym_g eager_pk custom
+ifeq ($(filter $(DEBOUNCE_TYPE),$(VALID_DEBOUNCE_TYPES)),)
+    $(error DEBOUNCE_TYPE="$(DEBOUNCE_TYPE)" is not a valid debounce algorithm)
+endif
+ifeq ($(strip $(DEBOUNCE_TYPE)), sym_g)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_sym_g.c
+else ifeq ($(strip $(DEBOUNCE_TYPE)), eager_pk)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_eager_pk.c
+endif
+```
+
+# Debounce selection
+
+| DEBOUNCE_ALGO    | Description                                                 | What to do                    |
+| -------------    | ---------------------------------------------------         | ----------------------------- |
+| Not defined      | You are using the included matrix.c and debounce.c          | Nothing. Debounce_sym_g will be compiled, and used if necessary |
+| custom           | Use your own debounce.c                                     | ```SRC += debounce.c``` add your own debounce.c and implement necessary functions |
+| sym_g / eager_pk | You are using the included matrix.c and debounce.c          | Use an alternative debounce algorithm |
+
+**Regarding split keyboards**: 
+The debounce code is compatible with split keyboards.
+
+# Use your own debouncing code
+* Set ```DEBOUNCE_TYPE = custom ```.
+* Add ```SRC += debounce.c```
+* Add your own ```debounce.c```. Look at included ```debounce_sym_g.c```s for sample implementations.
+* Debouncing occurs after every raw matrix scan.
+* Use num_rows rather than MATRIX_ROWS, so that split keyboards are supported correctly.
+
+# Changing between included debouncing methods
+You can either use your own code, by including your own debounce.c, or switch to another included one.
+Included debounce methods are:
+* debounce_eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` millseconds of no further input for that key
+* debounce_sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed.
+
+

docs/feature_encoders.md

@@ -38,7 +38,7 @@ or `keymap.c`:
         } else {
           tap_code(KC_PGUP);
         }
-      } else if (index == 2) {
+      } else if (index == 1) { /* Second encoder
         if (clockwise) {
           tap_code(KC_UP);
         } else {

docs/feature_grave_esc.md

@@ -4,7 +4,11 @@ If you're using a 60% keyboard, or any other layout with no F-row, you will have
 
 ## Usage
 
-Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. When pressed it will behave like `KC_ESC`, but with Shift or GUI held it will send `KC_GRAVE`.
+Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. Most of the time this key will output `KC_ESC` when pressed. However, when Shift or GUI are held down it will output `KC_GRV` instead.
+
+## What Your OS Sees
+
+If Mary presses GESC on her keyboard, the OS will see an KC_ESC character. Now if Mary holds Shift down and presses GESC it will output `~`, or a shifted backtick. Now if she holds GUI/CMD/WIN, it will output a simple <code>&#96;</code> character.
 
 ## Keycodes
 
@@ -12,6 +16,10 @@ Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) w
 |---------|-----------|------------------------------------------------------------------|
 |`KC_GESC`|`GRAVE_ESC`|Escape when pressed, <code>&#96;</code> when Shift or GUI are held|
 
+### Caveats
+
+ * On macOS CMD/GUI + KC_GRV is actually mapped to a hot key so it will not output a backtick.
+
 ## Configuration
 
 There are several possible key combinations this will break, among them Control+Shift+Escape on Windows and Command+Option+Escape on macOS. To work around this, you can `#define` these options in your `config.h`:

docs/feature_haptic_feedback.md

@@ -0,0 +1,147 @@
+# Haptic Feedback
+
+## Haptic feedback rules.mk options
+
+The following options are currently available for haptic feedback in `rule.mk`:
+
+`HAPTIC_ENABLE += DRV2605L`
+
+`HAPTIC_ENABLE += SOLENOID`
+
+## Known Supported Hardware
+
+| Name               | Description                                     |
+|--------------------|-------------------------------------------------|
+| [LV061228B-L65-A](https://www.digikey.com/product-detail/en/jinlong-machinery-electronics-inc/LV061228B-L65-A/1670-1050-ND/7732325) | z-axis 2v LRA |
+| [Mini Motor Disc](https://www.adafruit.com/product/1201)  | small 2-5v ERM |
+
+## Haptic Keycodes
+
+Not all keycodes below will work depending on which haptic mechanism you have chosen.
+
+| Name      | Description                                           |
+|-----------|-------------------------------------------------------|
+|`HPT_ON`   | Turn haptic feedback on                               |
+|`HPT_OFF`  | Turn haptic feedback on                               |
+|`HPT_TOG`  | Toggle haptic feedback on/off                         |
+|`HPT_RST`  | Reset haptic feedback config to default               |
+|`HPT_FBK`  | Toggle feedback to occur on keypress, release or both |
+|`HPT_BUZ`  | Toggle solenoid buzz on/off                           |
+|`HPT_MODI` | Go to next DRV2605L waveform                          |
+|`HPT_MODD` | Go to previous DRV2605L waveform                      |
+|`HPT_DWLI` | Increase Solenoid dwell time                          |
+|`HPT_DWLD` | Decrease Solenoid dwell time                          |
+
+### Solenoids
+
+First you will need a build a circuit to drive the solenoid through a mosfet as most MCU will not be able to provide the current needed to drive the coil in the solenoid.
+
+[Wiring diagram provided by Adafruit](https://playground.arduino.cc/uploads/Learning/solenoid_driver.pdf)
+
+Select a pin that has PWM for the signal pin
+
+```
+#define SOLENOID_PIN *pin*
+```
+
+Beware that some pins may be powered during bootloader (ie. A13 on the STM32F303 chip) and will result in the solenoid kept in the on state through the whole flashing process. This may overheat and damage the solenoid. If you find that the pin the solenoid is connected to is triggering the solenoid during bootloader/DFU, select another pin.
+
+### DRV2605L
+
+DRV2605L is controlled over i2c protocol, and has to be connected to the SDA and SCL pins, these varies depending on the MCU in use.
+
+#### Feedback motor setup
+
+This driver supports 2 different feedback motors. Set the following in your `config.h` based on which motor you have selected.
+
+##### ERM
+
+Eccentric Rotating Mass vibration motors (ERM) is motor with a off-set weight attached so when drive signal is attached, the off-set weight spins and causes a sinusoidal wave that translate into vibrations.
+
+```
+#define FB_ERM_LRA 0
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* Please refer to your datasheet for the optimal setting for your specific motor. */
+#define RATED_VOLTAGE 3
+#define V_PEAK 5
+```
+##### LRA
+
+Linear resonant actuators (LRA, also know as a linear vibrator) works different from a ERM. A LRA has a weight and magnet suspended by springs and a voice coil. When the drive signal is applied, the weight would be vibrate on a single axis (side to side or up and down). Since the weight is attached to a spring, there is a resonance effect at a specific frequency. This frequency is where the LRA will operate the most efficiently. Refer to the motor's datasheet for the recommanded range for this frequency.
+
+``` 
+#define FB_ERM_LRA 1
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* Please refer to your datasheet for the optimal setting for your specific motor. */
+#define RATED_VOLTAGE 2
+#define V_PEAK 2.8
+#define V_RMS 2.0 
+#define V_PEAK 2.1
+#define F_LRA 205 /* resonance freq */
+```
+
+#### DRV2605L waveform library
+
+DRV2605L comes with preloaded library of various waveform sequences that can be called and played. If writing a macro, these waveforms can be played using `DRV_pulse(*sequence name or number*)`
+
+List of waveform sequences from the datasheet:
+
+|seq# | Sequence name          |seq# | Sequence name                  |seq# |Sequence name                           |
+|-----|---------------------|-----|-----------------------------------|-----|--------------------------------------|
+| 1   | strong_click 		| 43  | lg_dblclick_med_60                | 85  | transition_rampup_med_smooth2        |
+| 2   | strong_click_60 	| 44  | lg_dblsharp_tick                  | 86  | transition_rampup_short_smooth1      |
+| 3   | strong_click_30 	| 45  | lg_dblsharp_tick_80               | 87  | transition_rampup_short_smooth2      |
+| 4   | sharp_click 		| 46  | lg_dblsharp_tick_60               | 88  | transition_rampup_long_sharp1        |
+| 5   | sharp_click_60      | 47  | buzz                              | 89  | transition_rampup_long_sharp2        |
+| 6   | sharp_click_30      | 48  | buzz_80				              | 90  | transition_rampup_med_sharp1         |
+| 7   | soft_bump           | 49  | buzz_60		                      | 91  | transition_rampup_med_sharp2         |
+| 8   | soft_bump_60        | 50  | buzz_40				              | 92  | transition_rampup_short_sharp1       |
+| 9   | soft_bump_30        | 51  | buzz_20				              | 93  | transition_rampup_short_sharp2       |
+| 10  | dbl_click           | 52  | pulsing_strong                    | 94  | transition_rampdown_long_smooth1_50  |
+| 11  | dbl_click_60        | 53  | pulsing_strong_80                 | 95  | transition_rampdown_long_smooth2_50  |
+| 12  | trp_click           | 54  | pulsing_medium                    | 96  | transition_rampdown_med_smooth1_50   |
+| 13  | soft_fuzz           | 55  | pulsing_medium_80                 | 97  | transition_rampdown_med_smooth2_50   |
+| 14  | strong_buzz         | 56  | pulsing_sharp                     | 98  | transition_rampdown_short_smooth1_50 |
+| 15  | alert_750ms         | 57  | pulsing_sharp_80                  | 99  | transition_rampdown_short_smooth2_50 |
+| 16  | alert_1000ms        | 58  | transition_click	              | 100 | transition_rampdown_long_sharp1_50   |
+| 17  | strong_click1       | 59  | transition_click_80               | 101 | transition_rampdown_long_sharp2_50   |
+| 18  | strong_click2_80    | 60  | transition_click_60	              | 102 | transition_rampdown_med_sharp1_50    |
+| 19  | strong_click3_60    | 61  | transition_click_40	              | 103 | transition_rampdown_med_sharp2_50    |
+| 20  | strong_click4_30    | 62  | transition_click_20	              | 104 | transition_rampdown_short_sharp1_50  |
+| 21  | medium_click1       | 63  | transition_click_10	              | 105 | transition_rampdown_short_sharp2_50  |
+| 22  | medium_click2_80    | 64  | transition_hum                    | 106 | transition_rampup_long_smooth1_50    |
+| 23  | medium_click3_60    | 65  | transition_hum_80                 | 107 | transition_rampup_long_smooth2_50    |
+| 24  | sharp_tick1         | 66  | transition_hum_60                 | 108 | transition_rampup_med_smooth1_50     |
+| 25  | sharp_tick2_80      | 67  | transition_hum_40                 | 109 | transition_rampup_med_smooth2_50     |
+| 26  | sharp_tick3_60      | 68  | transition_hum_20                 | 110 | transition_rampup_short_smooth1_50   |
+| 27  | sh_dblclick_str     | 69  | transition_hum_10                 | 111 | transition_rampup_short_smooth2_50   |
+| 28  | sh_dblclick_str_80  | 70  | transition_rampdown_long_smooth1  | 112 | transition_rampup_long_sharp1_50     |
+| 29  | sh_dblclick_str_60  | 71  | transition_rampdown_long_smooth2  | 113 | transition_rampup_long_sharp2_50     |
+| 30  | sh_dblclick_str_30  | 72  | transition_rampdown_med_smooth1   | 114 | transition_rampup_med_sharp1_50      |
+| 31  | sh_dblclick_med     | 73  | transition_rampdown_med_smooth2   | 115 | transition_rampup_med_sharp2_50      |
+| 32  | sh_dblclick_med_80  | 74  | transition_rampdown_short_smooth1 | 116 | transition_rampup_short_sharp1_50    |
+| 33  | sh_dblclick_med_60  | 75  | transition_rampdown_short_smooth2 | 117 | transition_rampup_short_sharp2_50    |
+| 34  | sh_dblsharp_tick    | 76  | transition_rampdown_long_sharp1   | 118 | long_buzz_for_programmatic_stopping  |
+| 35  | sh_dblsharp_tick_80 | 77  | transition_rampdown_long_sharp2   | 119 | smooth_hum1_50                       |
+| 36  | sh_dblsharp_tick_60 | 78  | transition_rampdown_med_sharp1    | 120 | smooth_hum2_40                       |
+| 37  | lg_dblclick_str     | 79  | transition_rampdown_med_sharp2    | 121 | smooth_hum3_30                       |
+| 38  | lg_dblclick_str_80  | 80  | transition_rampdown_short_sharp1  | 122 | smooth_hum4_20                       |
+| 39  | lg_dblclick_str_60  | 81  | transition_rampdown_short_sharp2  | 123 | smooth_hum5_10                       |
+| 40  | lg_dblclick_str_30  | 82  | transition_rampup_long_smooth1    |     |                                      |
+| 41  | lg_dblclick_med     | 83  | transition_rampup_long_smooth2    |     |                                      |
+| 42  | lg_dblclick_med_80  | 84  | transition_rampup_med_smooth1     |     |                                      |
+### Optional DRV2605L defines
+
+```
+#define DRV_GREETING *sequence name or number*
+```
+If haptic feedback is enabled, the keyboard will vibrate to a specific sqeuence during startup. That can be selected using the following define:
+
+```
+#define DRV_MODE_DEFAULT *sequence name or number*
+```
+This will set what sequence HPT_RST will set as the active mode. If not defined, mode will be set to 1 when HPT_RST is pressed.

docs/feature_layouts.md

@@ -51,6 +51,35 @@ The folder name must be added to the keyboard's `rules.mk`:
 
 but the `LAYOUT_<layout>` variable must be defined in `<folder>.h` as well.
 
+## Building a Keymap
+
+You should be able to build the keyboard keymap with a command in this format:
+
+    make <keyboard>:<layout>
+
+### Conflicting layouts
+When a keyboard supports multiple layout options,
+
+    LAYOUTS = ortho_4x4 ortho_4x12
+
+And a layout exists for both options,
+```
+layouts/
++ community/
+| + ortho_4x4/
+| | + <layout>/
+| | | + ...
+| + ortho_4x12/
+| | + <layout>/
+| | | + ...
+| + ...
+```
+
+The FORCE_LAYOUT argument can be used to specify which layout to build
+
+    make <keyboard>:<layout> FORCE_LAYOUT=ortho_4x4
+    make <keyboard>:<layout> FORCE_LAYOUT=ortho_4x12
+
 ## Tips for Making Layouts Keyboard-Agnostic
 
 ### Includes

docs/feature_led_matrix.md

@@ -0,0 +1,90 @@
+# LED Matrix Lighting
+
+This feature allows you to use LED matrices driven by external drivers. It hooks into the backlight system so you can use the same keycodes as backlighting to control it.
+
+If you want to use RGB LED's you should use the [RGB Matrix Subsystem](feature_rgb_matrix.md) instead.
+
+## Driver configuration
+
+### IS31FL3731
+
+There is basic support for addressable LED matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
+
+    LED_MATRIX_ENABLE = IS31FL3731
+    
+You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `LED_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
+| `LED_DRIVER_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
+| `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | |
+| `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | |
+| `LED_DRIVER_ADDR_3` | (Optional) Address for the third LED driver | |
+| `LED_DRIVER_ADDR_4` | (Optional) Address for the fourth LED driver | |
+
+Here is an example using 2 drivers.
+
+	// This is a 7-bit address, that gets left-shifted and bit 0
+	// set to 0 for write, 1 for read (as per I2C protocol)
+	// The address will vary depending on your wiring:
+	// 0b1110100 AD <-> GND
+	// 0b1110111 AD <-> VCC
+	// 0b1110101 AD <-> SCL
+	// 0b1110110 AD <-> SDA
+	#define LED_DRIVER_ADDR_1 0b1110100
+	#define LED_DRIVER_ADDR_2 0b1110110
+
+	#define LED_DRIVER_COUNT 2
+	#define LED_DRIVER_1_LED_COUNT 25
+	#define LED_DRIVER_2_LED_COUNT 24
+	#define LED_DRIVER_LED_COUNT LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL
+
+Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
+
+Define these arrays listing all the LEDs in your `<keyboard>.c`:
+
+	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+	/* Refer to IS31 manual for these locations
+	 *   driver
+	 *   |  LED address
+	 *   |  | */
+	    {0, C3_3},
+	    ....
+	}
+
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731-simple.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` ).
+
+## Keycodes
+
+All LED matrix keycodes are currently shared with the [backlight system](feature_backlight.md).
+
+## LED Matrix Effects
+
+Currently no LED matrix effects have been created.
+
+## Custom layer effects
+
+Custom layer effects can be done by defining this in your `<keyboard>.c`:
+
+    void led_matrix_indicators_kb(void) {
+        led_matrix_set_index_value(index, value);
+    }
+
+A similar function works in the keymap as `led_matrix_indicators_user`.
+
+## Suspended state
+
+To use the suspend feature, add this to your `<keyboard>.c`:
+
+	void suspend_power_down_kb(void)
+	{
+	    led_matrix_set_suspend_state(true);
+	}
+
+	void suspend_wakeup_init_kb(void)
+	{
+	    led_matrix_set_suspend_state(false);
+	}

docs/feature_rgb_matrix.md

@@ -1,5 +1,9 @@
 # RGB Matrix Lighting
 
+This feature allows you to use RGB LED matrices driven by external drivers. It hooks into the RGBLIGHT system so you can use the same keycodes as RGBLIGHT to control it.
+
+If you want to use single color LED's you should use the [LED Matrix Subsystem](feature_led_matrix.md) instead.
+
 ## Driver configuration
 
 ### IS31FL3731

docs/feature_rgblight.md

@@ -148,37 +148,43 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
 
 If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:
 
-|Function                           |Description                                                                                                                                                            |
-|-----------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------|
-|`rgblight_enable()`                |Turn LEDs on, based on their previous state                                                                                                                            |
-|`rgblight_enable_noeeprom()`       |Turn LEDs on, based on their previous state (not written to EEPROM)                                                                                                    |
-|`rgblight_disable()`               |Turn LEDs off                                                                                                                                                          |
-|`rgblight_disable_noeeprom()`      |Turn LEDs off (not written to EEPROM)                                                                                                                                  |
-|`rgblight_mode(x)`                 |Set the mode, if RGB animations are enabled                                                                                                                            |
-|`rgblight_mode_noeeprom(x)`        |Set the mode, if RGB animations are enabled (not written to EEPROM)                                                                                                    |
-|`rgblight_setrgb(r, g, b)`         |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                                                    |
-|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)                       |
-|`rgblight_sethsv(h, s, v)`         |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255                                                                   |
-|`rgblight_sethsv_noeeprom(h, s, v)`|Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM)                                           |
-|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
-|`rgblight_toggle()`                |Toggle all LEDs between on and off                                                                                                                                     |
-|`rgblight_toggle_noeeprom()`       |Toggle all LEDs between on and off (not written to EEPROM)                                                                                                             |
-|`rgblight_step()`                  |Change the mode to the next RGB animation in the list of enabled RGB animations                                                                                        |
-|`rgblight_step_noeeprom()`         |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                                |
-|`rgblight_step_reverse()`          |Change the mode to the previous RGB animation in the list of enabled RGB animations                                                                                    |
-|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                            |
-|`rgblight_increase_hue()`          |Increase the hue for all LEDs. This wraps around at maximum hue                                                                                                        |
-|`rgblight_increase_hue_noeeprom()` |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM)                                                                                |
-|`rgblight_decrease_hue()`          |Decrease the hue for all LEDs. This wraps around at minimum hue                                                                                                        |
-|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM)                                                                                |
-|`rgblight_increase_sat()`          |Increase the saturation for all LEDs. This wraps around at maximum saturation                                                                                          |
-|`rgblight_increase_sat_noeeprom()` |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM)                                                                  |
-|`rgblight_decrease_sat()`          |Decrease the saturation for all LEDs. This wraps around at minimum saturation                                                                                          |
-|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM)                                                                  |
-|`rgblight_increase_val()`          |Increase the value for all LEDs. This wraps around at maximum value                                                                                                    |
-|`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM)                                                                            |
-|`rgblight_decrease_val()`          |Decrease the value for all LEDs. This wraps around at minimum value                                                                                                    |
-|`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM)                                                                            |
+|Function                                    |Description                                                                                                                                                   |
+|--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`rgblight_enable()`                         |Turn LEDs on, based on their previous state                                                                                                                   |
+|`rgblight_enable_noeeprom()`                |Turn LEDs on, based on their previous state (not written to EEPROM)                                                                                           |
+|`rgblight_disable()`                        |Turn LEDs off                                                                                                                                                 |
+|`rgblight_disable_noeeprom()`               |Turn LEDs off (not written to EEPROM)                                                                                                                         |
+|`rgblight_mode(x)`                          |Set the mode, if RGB animations are enabled                                                                                                                   |
+|`rgblight_mode_noeeprom(x)`                 |Set the mode, if RGB animations are enabled (not written to EEPROM)                                                                                           |
+|`rgblight_setrgb(r, g, b)`                  |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                                           |
+|`rgblight_setrgb_at(r, g, b, led)`          |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)              |
+|`rgblight_setrgb_range(r, g, b, start, end)`|Set a continuous range of LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_setrgb_master(r, g, b)`           |Set the LEDs on the master side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                      |
+|`rgblight_setrgb_slave(r, g, b)`            |Set the LEDs on the slave side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                       |
+|`rgblight_sethsv(h, s, v)`                  |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255                                                          |
+|`rgblight_sethsv_noeeprom(h, s, v)`         |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM)                                  |
+|`rgblight_sethsv_at(h, s, v, led)`          |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_sethsv_master(h, s, v)`           |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                 |
+|`rgblight_sethsv_slave(h, s, v)`            |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                  |
+|`rgblight_toggle()`                         |Toggle all LEDs between on and off                                                                                                                            |
+|`rgblight_toggle_noeeprom()`                |Toggle all LEDs between on and off (not written to EEPROM)                                                                                                    |
+|`rgblight_step()`                           |Change the mode to the next RGB animation in the list of enabled RGB animations                                                                               |
+|`rgblight_step_noeeprom()`                  |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                       |
+|`rgblight_step_reverse()`                   |Change the mode to the previous RGB animation in the list of enabled RGB animations                                                                           |
+|`rgblight_step_reverse_noeeprom()`          |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                   |
+|`rgblight_increase_hue()`                   |Increase the hue for all LEDs. This wraps around at maximum hue                                                                                               |
+|`rgblight_increase_hue_noeeprom()`          |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM)                                                                       |
+|`rgblight_decrease_hue()`                   |Decrease the hue for all LEDs. This wraps around at minimum hue                                                                                               |
+|`rgblight_decrease_hue_noeeprom()`          |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM)                                                                       |
+|`rgblight_increase_sat()`                   |Increase the saturation for all LEDs. This wraps around at maximum saturation                                                                                 |
+|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM)                                                         |
+|`rgblight_decrease_sat()`                   |Decrease the saturation for all LEDs. This wraps around at minimum saturation                                                                                 |
+|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM)                                                         |
+|`rgblight_increase_val()`                   |Increase the value for all LEDs. This wraps around at maximum value                                                                                           |
+|`rgblight_increase_val_noeeprom()`          |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM)                                                                   |
+|`rgblight_decrease_val()`                   |Decrease the value for all LEDs. This wraps around at minimum value                                                                                           |
+|`rgblight_decrease_val_noeeprom()`          |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM)                                                                   |
 
 Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list!
 

docs/getting_started_build_tools.md

@@ -129,12 +129,12 @@ If you have trouble and want to ask for help, it is useful to generate a *Win_Ch
 
 ## Docker
 
-If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker CE](https://docs.docker.com/install/#supported-platforms), run the following command from the `qmk_firmware` directory to build a keyboard/keymap:
+If this is a bit complex for you, Docker might be the turnkey solution you need. After installing [Docker CE](https://docs.docker.com/install/#supported-platforms), run the following command from the `qmk_firmware` directory to build a keyboard/keymap:
 ```bash
-util/docker_build.sh keyboard:keymap 
+util/docker_build.sh keyboard:keymap
 # For example: util/docker_build.sh ergodox_ez:steno
 ```
-This will compile the targeted keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
+This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
 
 You can also start the script without any parameters, in which case it will ask you to input the build parameters one by one, which you may find easier to use:
 ```bash
@@ -147,7 +147,7 @@ There is also support for building _and_ flashing the keyboard straight from Doc
 util/docker_build.sh keyboard:keymap:target
 # For example: util/docker_build.sh planck/rev6:default:dfu-util
 ```
-If you're on Linux, this should work out of the box. On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use QMK Toolbox instead.
+If you're on Linux, this should work out of the box. On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use [QMK Toolbox](https://github.com/qmk/qmk_toolbox) instead.
 
 !> Docker for Windows requires [Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v) to be enabled. This means that it cannot work on versions of Windows which don't have Hyper-V, such as Windows 7, Windows 8 and **Windows 10 Home**.
 

docs/hardware_avr.md

@@ -87,7 +87,7 @@ Once you've defined the size of your matrix you need to define which pins on you
 
 The number of `MATRIX_ROW_PINS` entries must be the same as the number you assigned to `MATRIX_ROWS`, and likewise for `MATRIX_COL_PINS` and `MATRIX_COLS`. You do not have to specify `UNUSED_PINS`, but you can if you want to document what pins are open.
 
-Finally, you can specify the direction your diodes point. This can be `COL2ROW`, `ROW2COL`, or `CUSTOM_MATRIX`.
+Finally, you can specify the direction your diodes point. This can be `COL2ROW` or `ROW2COL`.
 
 ```c
 #define DIODE_DIRECTION COL2ROW

docs/hardware_keyboard_guidelines.md

@@ -1,20 +1,104 @@
 # QMK Keyboard Guidelines
 
-We welcome all keyboard projects into QMK, but ask that you try to stick to a couple guidelines that help us keep things organised and consistent.
+Since starting, QMK has grown by leaps and bounds thanks to people like you who contribute to creating and maintaining our community keyboards. As we've grown we've discovered some patterns that work well, and ask that you conform to them to make it easier for other people to benefit from your hard work.
+
 
 ## Naming Your Keyboard/Project
 
-All names should be lowercase alphanumeric, and separated by an underscore (`_`), but not begin with one. Your directory and your `.h` and `.c` files should have exactly the same name. All folders should follow the same format. `test`, `keyboard`, and `all` are reserved by make and are not a valid name for a keyboard.
+All keyboard names are in lower case, consisting only of letters, numbers, and underscore (`_`). Names may not begin with an underscore. Forward slash (`/`) is used as a sub-folder separation character.
 
-## `readme.md`
+The names `test`, `keyboard`, and `all` are reserved for make commands and may not be used as a keyboard or subfolder name.
 
-All projects need to have a `readme.md` file that explains what the keyboard is, who made it, where it is available, and links to more information. Please follow the [published template](documentation_templates.md#keyboard-readmemd-template).
+Valid Examples:
+
+* `412_64`
+* `chimera_ortho`
+* `clueboard/66/rev3`
+* `planck`
+* `v60_type_r`
+
+## Sub-folders
+
+QMK uses sub-folders both for organization and to share code between revisions of the same keyboard. You can nest folders up to 4 levels deep:
+
+    qmk_firmware/keyboards/top_folder/sub_1/sub_2/sub_3/sub_4
+
+If a sub-folder has a `rules.mk` file it will be considered a compilable keyboard. It will be available in QMK Configurator and tested with `make all`. If you are using a folder to organize several keyboards from the same maker you should not have a `rules.mk` file.
+
+Example:
+
+Clueboard uses sub-folders for both purposes, organization and keyboard revisions.
+
+* [`qmk_firmware`](https://github.com/qmk/qmk_firmware/tree/master)
+  * [`keyboards`](https://github.com/qmk/qmk_firmware/tree/master/keyboards)
+    * [`clueboard`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard)  ← This is the organization folder, there's no `rules.mk` file
+      * [`60`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/60)  ← This is a compilable keyboard, it has a `rules.mk` file
+      * [`66`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66) ← This is also compilable- it uses `DEFAULT_FOLDER` to specify `rev3` as the default revision
+        * [`rev1`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev1) ← compilable: `make clueboard/66/rev1`
+        * [`rev2`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev2) ← compilable: `make clueboard/66/rev2`
+        * [`rev3`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev3) ← compilable: `make clueboard/66/rev3` or `make clueboard/66`
+
+## Keyboard Folder Structure
+
+Your keyboard should be located in `qmk_firmware/keyboards/` and the folder name should be your keyboard's name as described in the previous section. Inside this folder should be several files:
+
+* `readme.md`
+* `info.json`
+* `config.h`
+* `rules.mk`
+* `<keyboard_name>.c`
+* `<keyboard_name>.h`
+
+### `readme.md`
+
+All projects need to have a `readme.md` file that explains what the keyboard is, who made it and where it's available. If applicable, it should also contain links to more information, such as the maker's website. Please follow the [published template](documentation_templates.md#keyboard-readmemd-template).
+
+### `info.json`
+
+This file is used by the [QMK API](https://github.com/qmk/qmk_api). It contains the information [QMK Configurator](https://config.qmk.fm/) needs to display a representation of your keyboard. You can also set metadata here. For more information see the [reference page](reference_info_json.md).
+
+### `config.h`
+
+All projects need to have a `config.h` file that sets things like the matrix size, product name, USB VID/PID, description and other settings. In general, use this file to set essential information and defaults for your keyboard that will always work.
+
+### `rules.mk`
+
+The presence of this file means that the folder is a keyboard target and can be used in `make` commands. This is where you setup the build environment for your keyboard and configure the default set of features.
+
+### `<keyboard_name.c>`
+
+This is where you will write custom code for your keyboard. Typically you will write code to initialize and interface with the hardware in your keyboard. If your keyboard consists of only a key matrix with no LEDs, speakers, or other auxillary hardware this file can be blank.
+
+The following functions are typically defined in this file:
+
+* `void matrix_init_kb(void)`
+* `void matrix_scan_kb(void)`
+* `bool process_record_kb(uint16_t keycode, keyrecord_t *record)`
+* `void led_set_kb(uint8_t usb_led)`
+
+### `<keyboard_name.h>`
+
+This file is used to define the matrix for your keyboard. You should define at least one C macro which translates an array into a matrix representing the physical switch matrix for your keyboard. If it's possible to build your keyboard with multiple layouts you should define additional macros.
+
+If you have only a single layout you should call this macro `LAYOUT`.
+
+When defining multiple layouts you should have a base layout, named `LAYOUT_all`, that supports all possible switch positions on your matrix, even if that layout is impossible to build physically. This is the macro you should use in your `default` keymap. You should then have additional keymaps named `default_<layout>` that use your other layout macros. This will make it easier for people to use the layouts you define.
+
+Layout macro names are entirely lowercase, except for the word `LAYOUT` at the front.
+
+As an example, if you have a 60% PCB that supports ANSI and ISO you might define the following layouts and keymaps:
+
+| Layout Name | Keymap Name | Description |
+|-------------|-------------|-------------|
+| LAYOUT_all | default | A layout that supports both ISO and ANSI |
+| LAYOUT_ansi | default_ansi | An ANSI layout |
+| LAYOUT_iso | default_iso | An ISO layout |
 
 ## Image/Hardware Files
 
-In an effort to keep the repo size down, we're no longer accepting images of any format in the repo, with few exceptions. Hosting them elsewhere (imgur) and linking them in the `readme.md` is the preferred method.
+In an effort to keep the repo size down we're no longer accepting binary files of any format, with few exceptions. Hosting them elsewhere (such as <https://imgur.com>) and linking them in the `readme.md` is preferred.
 
-Any sort of hardware file (plate, case, pcb) can't be stored in qmk_firmware, but we have the [qmk.fm repo](https://github.com/qmk/qmk.fm) where such files (as well as in-depth info) can be stored and viewed on [qmk.fm](http://qmk.fm). Downloadable files are stored in `/<keyboard>/` (name follows the same format as above) which are served at `http://qmk.fm/<keyboard>/`, and pages are generated from `/_pages/<keyboard>/` which are served at the same location (.md files are generated into .html files through Jekyll). Check out the `lets_split` directory for an example.
+Hardware files (such as plates, cases, pcb) can be contributed to the [qmk.fm repo](https://github.com/qmk/qmk.fm) and they will be made available on [qmk.fm](http://qmk.fm). Downloadable files are stored in `/<keyboard>/` (name follows the same format as above) which are served at `http://qmk.fm/<keyboard>/`, and pages are generated from `/_pages/<keyboard>/` which are served at the same location (.md files are generated into .html files through Jekyll). Check out the `lets_split` folder for an example.
 
 ## Keyboard Defaults
 
@@ -32,77 +116,6 @@ If your keyboard does not have 2 shift keys you should provide a working default
 
 As documented on [Customizing Functionality](custom_quantum_functions.md) you can define custom functions for your keyboard. Please keep in mind that your users may want to customize that behavior as well, and make it possible for them to do that. If you are providing a custom function, for example `process_record_kb()`, make sure that your function calls the `_user()` version of the call too. You should also take into account the return value of the `_user()` version, and only run your custom code if the user returns `true`.
 
-## Keyboard Metadata
-
-As QMK grows so does the ecosystem surrounding QMK. To make it easier for projects in that ecosystem to tie into QMK as we make changes we are developing a metadata system to expose information about keyboards in QMK.
-
-You can create `info.json` files at every level under `qmk_firmware/keyboards/<name>` to specify this metadata. These files are combined, with more specific files overriding keys in less specific files. This means you do not need to duplicate your metadata information. For example, `qmk_firmware/keyboards/clueboard/info.json` specifies `manufacturer` and `maintainer`, while `qmk_firmware/keyboards/clueboard/66/info.json` specifies more specific information about Clueboard 66%.
-
-### `info.json` Format
-
-The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
-
-* `keyboard_name`
-  * A free-form text string describing the keyboard.
-  * Example: `Clueboard 66%`
-* `url`
-  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
-* `maintainer`
-  * GitHub username of the maintainer, or `qmk` for community maintained boards
-* `width`
-  * Width of the board in Key Units
-* `height`
-  * Height of the board in Key Units
-* `layouts`
-  * Physical Layout representations. See the next section for more detail.
-
-#### Layout Format
-
-Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
-
-* `width`
-  * Optional: The width of the layout in Key Units
-* `height`
-  * Optional: The height of the layout in Key Units
-* `key_count`
-  * **Required**: The number of keys in this layout
-* `layout`
-  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
-
-#### Key Dictionary Format
-
-Each Key Dictionary in a layout describes the physical properties of a key. If you are familiar with the Raw Code for <http://keyboard-layout-editor.com> you will find many of the concepts the same. We re-use the same key names and layout choices wherever possible, but unlike keyboard-layout-editor each key is stateless, inheriting no properties from the keys that came before it.
-
-All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
-
-* `X`
-  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
-* `Y`
-  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
-* `W`
-  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
-* `H`
-  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
-* `R`
-  * How many degrees clockwise to rotate the key.
-* `RX`
-  * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x`
-* `RY`
-  * The absolute position of the point to rotate the key around in the vertical axis. Default: `y`
-* `KS`
-  * Key Shape: define a polygon by providing a list of points, in Key Units.
-  * **Important**: These are relative to the top-left of the key, not absolute.
-  * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]`
-
-### How is the Metadata Exposed?
-
-This metadata is primarily used in two ways:
-
-* To allow web-based configurators to dynamically generate UI
-* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter.
-
-Configurator authors can see the [QMK Compiler](https://docs.compile.qmk.fm/api_docs.html) docs for more information on using the JSON API.
-
 ## Non-Production/Handwired Projects
 
 We're happy to accept any project that uses QMK, including prototypes and handwired ones, but we have a separate `/keyboards/handwired/` folder for them, so the main `/keyboards/` folder doesn't get overcrowded. If a prototype project becomes a production project at some point in the future, we'd be happy to move it to the main `/keyboards/` folder!

docs/i2c_driver.md

@@ -33,8 +33,8 @@ The following defines can be used to configure the I2C master driver.
 
 |Variable          |Description                                        |Default|
 |------------------|---------------------------------------------------|-------|
-|`#F_SCL`          |Clock frequency in Hz                              |400KHz |
-|`#Prescaler`      |Divides master clock to aid in I2C clock selection |1      |
+|`F_SCL`           |Clock frequency in Hz                              |400KHz |
+|`Prescaler`       |Divides master clock to aid in I2C clock selection |1      |
 
 AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required.
 
@@ -63,20 +63,24 @@ Lastly, we need to assign the correct GPIO pins depending on the I2C hardware dr
 
 By default the I2C1 hardware driver is assumed to be used. If another hardware driver is used,  `#define I2C_DRIVER I2CDX` should be added to the `config.h` file with X being the number of hardware driver used. For example is I2C3 is enabled, the `config.h` file should contain `#define I2C_DRIVER I2CD3`. This aligns the QMK I2C driver with the Chibios I2C driver.
 
-STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C.
+STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C. You can use these defines to set your i2c pins:
 
-This can be changed by declaring the `i2c_init` function which intentionally has a weak attribute. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
+| Variable    | Description                                  | Default |
+|-------------|----------------------------------------------|---------|
+| `I2C1_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) | `GPIOB` |
+| `I2C1_SCL`  | The pin number for the SCL pin (0-9)         | `6`     |
+| `I2C1_SDA`  | The pin number for the SDA pin (0-9)         | `7`     |
+
+You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
 
 ```C
 void i2c_init(void)
 {
   setPinInput(B6); // Try releasing special pins for a short time
   setPinInput(B7);
-  chThdSleepMilliseconds(10); // Wait for the release to happen
+  wait_ms(10); // Wait for the release to happen
 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function
   palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function
 }
 ```
-
-

docs/newbs_testing_debugging.md

@@ -15,7 +15,17 @@ Note: These programs are not provided by or endorsed by QMK.
 
 ## Debugging With QMK Toolbox
 
-[QMK Toolbox](https://github.com/qmk/qmk_toolbox) will show messages from your keyboard if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, or use the [Command](feature_command.md) feature to enable debug mode.
+[QMK Toolbox](https://github.com/qmk/qmk_toolbox) will show messages from your keyboard if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
+
+```c
+void keyboard_post_init_user(void) {
+  // Customise these values to desired behaviour
+  debug_enable=true;
+  debug_matrix=true;
+  //debug_keyboard=true;
+  //debug_mouse=true;
+}
+```
 
 <!-- FIXME: Describe the debugging messages here. -->
 

docs/reference_info_json.md

@@ -0,0 +1,73 @@
+# `info.json`
+
+This file is used by the [QMK API](https://github.com/qmk/qmk_api). It contains the information [QMK Configurator](https://config.qmk.fm/) needs to display a representation of your keyboard. You can also set metadata here.
+
+You can create `info.json` files at every level under `qmk_firmware/keyboards/<name>` to specify this metadata. These files are combined, with more specific files overriding keys in less specific files. This means you do not need to duplicate your metadata information. For example, `qmk_firmware/keyboards/clueboard/info.json` specifies `manufacturer` and `maintainer`, while `qmk_firmware/keyboards/clueboard/66/info.json` specifies more specific information about Clueboard 66%.
+
+## `info.json` Format
+
+The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
+
+* `keyboard_name`
+  * A free-form text string describing the keyboard.
+  * Example: `Clueboard 66%`
+* `url`
+  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
+* `maintainer`
+  * GitHub username of the maintainer, or `qmk` for community maintained boards
+* `width`
+  * Width of the board in Key Units
+* `height`
+  * Height of the board in Key Units
+* `layouts`
+  * Physical Layout representations. See the next section for more detail.
+
+### Layout Format
+
+Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
+
+* `width`
+  * Optional: The width of the layout in Key Units
+* `height`
+  * Optional: The height of the layout in Key Units
+* `key_count`
+  * **Required**: The number of keys in this layout
+* `layout`
+  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
+
+### Key Dictionary Format
+
+Each Key Dictionary in a layout describes the physical properties of a key. If you are familiar with the Raw Code for <http://keyboard-layout-editor.com> you will find many of the concepts the same. We re-use the same key names and layout choices wherever possible, but unlike keyboard-layout-editor each key is stateless, inheriting no properties from the keys that came before it.
+
+All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
+
+* `x`
+  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
+* `y`
+  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
+* `w`
+  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+* `h`
+  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+* `r`
+  * How many degrees clockwise to rotate the key.
+* `rx`
+  * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x`
+* `ry`
+  * The absolute position of the point to rotate the key around in the vertical axis. Default: `y`
+* `ks`
+  * Key Shape: define a polygon by providing a list of points, in Key Units.
+  * **Important**: These are relative to the top-left of the key, not absolute.
+  * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]`
+* `label`
+  * What to name this position in the matrix.
+  * This should usually be the same name as what is silkscreened on the PCB at this location.
+
+## How is the Metadata Exposed?
+
+This metadata is primarily used in two ways:
+
+* To allow web-based configurators to dynamically generate UI
+* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter.
+
+Configurator authors can see the [QMK Compiler](https://docs.api.qmk.fm/using-the-api) docs for more information on using the JSON API.

drivers/arm/i2c_master.c

@@ -46,13 +46,13 @@ __attribute__ ((weak))
 void i2c_init(void)
 {
   // Try releasing special pins for a short time
-  palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT);
 
   chThdSleepMilliseconds(10);
- 
-  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
-  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+
+  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }

drivers/arm/i2c_master.h

@@ -26,6 +26,16 @@
 #include "ch.h"
 #include <hal.h>
 
+#ifndef I2C1_BANK
+    #define I2C1_BANK GPIOB
+#endif
+#ifndef I2C1_SCL
+    #define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+    #define I2C1_SDA 7
+#endif
+
 #ifndef I2C_DRIVER
   #define I2C_DRIVER I2CD1
 #endif

drivers/avr/apa102.c

@@ -0,0 +1,101 @@
+/*
+* APA102 lib V1.0a
+*
+* Controls APA102 RGB-LEDs
+* Author: Mikkel (Duckle29 on github)
+*
+* Dec 22th, 2017  v1.0a Initial Version
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "apa102.h"
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "debug.h"
+
+// Setleds for standard RGB
+void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds){
+  apa102_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF));
+}
+
+void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK){
+  pinMode(RGB_DI_PIN, PinDirectionOutput);
+  pinMode(RGB_CLK_PIN, PinDirectionOutput);
+
+  apa102_send_array((uint8_t*)ledarray,leds)
+}
+
+void apa102_send_array(uint8_t *data, uint16_t leds){ // Data is struct of 3 bytes. RGB - leds is number of leds in data
+  apa102_start_frame();
+  while(leds--){
+    apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r);
+    data++;
+  }
+  apa102_end_frame(leds);
+}
+
+void apa102_send_frame(uint32_t frame){
+  for(uint32_t i=0xFF; i>0;){
+    apa102_send_byte(frame & i);
+    i = i << 8;
+  }
+}
+
+void apa102_start_frame(){
+  apa102_send_frame(0);
+}
+
+void apa102_end_frame(uint16_t leds)
+{
+  // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h
+  // and adapted. The code is MIT licensed. I think thats compatible?
+
+  // We need to send some more bytes to ensure that all the LEDs in the
+  // chain see their new color and start displaying it.
+  //
+  // The data stream seen by the last LED in the chain will be delayed by
+  // (count - 1) clock edges, because each LED before it inverts the clock
+  // line and delays the data by one clock edge.  Therefore, to make sure
+  // the last LED actually receives the data we wrote, the number of extra
+  // edges we send at the end of the frame must be at least (count - 1).
+  // For the APA102C, that is sufficient.
+  //
+  // The SK9822 only updates after it sees 32 zero bits followed by one more
+  // rising edge.  To avoid having the update time depend on the color of
+  // the last LED, we send a dummy 0xFF byte.  (Unfortunately, this means
+  // that partial updates of the beginning of an LED strip are not possible;
+  // the LED after the last one you are trying to update will be black.)
+  // After that, to ensure that the last LED in the chain sees 32 zero bits
+  // and a rising edge, we need to send at least 65 + (count - 1) edges.  It
+  // is sufficent and simpler to just send (5 + count/16) bytes of zeros.
+  //
+  // We are ignoring the specification for the end frame in the APA102/SK9822
+  // datasheets because it does not actually ensure that all the LEDs will
+  // start displaying their new colors right away.
+
+  apa102_send_byte(0xFF);
+  for (uint16_t i = 0; i < 5 + leds / 16; i++){
+    apa102_send_byte(0);
+  }
+}
+
+void apa102_send_byte(uint8_t byte){
+  uint8_t i;
+  for (i = 0; i < 8; i++){
+    digitalWrite(RGB_DI_PIN, !!(byte & (1 << (7-i)));
+    digitalWrite(RGB_CLK_PIN, PinLevelHigh);
+  }
+}

drivers/avr/apa102.h

@@ -0,0 +1,46 @@
+/*
+ * light weight WS2812 lib include
+ *
+ * Version 2.3  - Nev 29th 2015
+ * Author: Tim (cpldcpu@gmail.com)
+ *
+ * Please do not change this file! All configuration is handled in "ws2812_config.h"
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+
+#include "rgblight_types.h"
+
+
+/* User Interface
+ *
+ * Input:
+ *         ledarray:           An array of GRB data describing the LED colors
+ *         number_of_leds:     The number of LEDs to write
+ *         pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
+ *
+ * The functions will perform the following actions:
+ *         - Set the data-out pin as output
+ *         - Send out the LED data
+ *         - Wait 50<35>s to reset the LEDs
+ */
+
+void apa102_setleds     (LED_TYPE *ledarray, uint16_t number_of_leds);
+void apa102_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
+void apa102_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);

drivers/haptic/DRV2605L.c

@@ -21,7 +21,7 @@
 #include <math.h>
 
 
-uint8_t DRV2605L_transfer_buffer[20];
+uint8_t DRV2605L_transfer_buffer[2];
 uint8_t DRV2605L_tx_register[0];
 uint8_t DRV2605L_read_buffer[0];
 uint8_t DRV2605L_read_register;
@@ -34,6 +34,11 @@ void DRV_write(uint8_t drv_register, uint8_t settings) {
 }
 
 uint8_t DRV_read(uint8_t regaddress) {
+#ifdef __AVR__
+  i2c_readReg(DRV2605L_BASE_ADDRESS << 1,
+    regaddress, DRV2605L_read_buffer, 1, 100);
+  DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+#else
   DRV2605L_tx_register[0] = regaddress;
   if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1,
     DRV2605L_tx_register, 1,
@@ -42,14 +47,13 @@ uint8_t DRV_read(uint8_t regaddress) {
     printf("err reading reg \n");
   }
   DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+#endif
 return DRV2605L_read_register;
 }
 
 void DRV_init(void)
 {
   i2c_init();
-  i2c_start(DRV2605L_BASE_ADDRESS);
-
   /* 0x07 sets DRV2605 into calibration mode */
   DRV_write(DRV_MODE,0x07); 
 
@@ -104,21 +108,17 @@ void DRV_init(void)
     C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME;
     DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte);
   DRV_write(DRV_LIB_SELECTION,LIB_SELECTION);
-  //start autocalibration
+
   DRV_write(DRV_GO, 0x01);
 
   /* 0x00 sets DRV2605 out of standby and to use internal trigger
    * 0x01 sets DRV2605 out of standby and to use external trigger */
   DRV_write(DRV_MODE,0x00); 
-  
-  /* 0x06: LRA library */
-  DRV_write(DRV_WAVEFORM_SEQ_1, 0x01);
-
-  /* 0xB9: LRA, 4x brake factor, medium gain, 7.5x back EMF
-   * 0x39: ERM, 4x brake factor, medium gain, 1.365x back EMF */
-  
-  /* TODO: setup auto-calibration as part of initiation */
 
+//Play greeting sequence
+  DRV_write(DRV_GO, 0x00);
+  DRV_write(DRV_WAVEFORM_SEQ_1, DRV_GREETING);
+  DRV_write(DRV_GO, 0x01);
 }
 
 void DRV_pulse(uint8_t sequence)

drivers/haptic/DRV2605L.h

@@ -31,13 +31,6 @@
 #define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
 #endif
 
-#ifndef RATED_VOLTAGE
-#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
-#ifndef V_PEAK
-#define V_PEAK 2.8
-#endif
-#endif
-
 /* LRA specific settings */
 #if FB_ERM_LRA == 1
 #ifndef V_RMS
@@ -49,6 +42,16 @@
 #ifndef F_LRA
 #define F_LRA 205
 #endif
+#ifndef RATED_VOLTAGE
+#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#endif
+#endif
+
+#ifndef RATED_VOLTAGE
+#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#endif
+#ifndef V_PEAK
+#define V_PEAK 2.8
 #endif
 
 /* Library Selection */
@@ -60,6 +63,13 @@
 #endif
 #endif
 
+#ifndef DRV_GREETING
+#define DRV_GREETING alert_750ms
+#endif
+#ifndef DRV_MODE_DEFAULT
+#define DRV_MODE_DEFAULT strong_click1
+#endif
+
 /* Control 1 register settings */
 #ifndef DRIVE_TIME
 #define DRIVE_TIME 25
@@ -162,7 +172,6 @@ void DRV_write(const uint8_t drv_register, const uint8_t settings);
 uint8_t DRV_read(const uint8_t regaddress);
 void DRV_pulse(const uint8_t sequence);
 
-
 typedef enum DRV_EFFECT{
   clear_sequence      = 0,
   strong_click 		    = 1,
@@ -288,6 +297,7 @@ typedef enum DRV_EFFECT{
   smooth_hum3_30 = 121,
   smooth_hum4_20 = 122,
   smooth_hum5_10 = 123,
+  drv_effect_max = 124,
 } DRV_EFFECT;
 
 /* Register bit array unions */

drivers/haptic/haptic.c

@@ -0,0 +1,248 @@
+/* Copyright 2019 ishtob
+ * Driver for haptic feedback written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "haptic.h"
+#include "eeconfig.h"
+#include "progmem.h"
+#include "debug.h"
+#ifdef DRV2605L
+#include "DRV2605L.h"
+#endif
+#ifdef SOLENOID_ENABLE
+#include "solenoid.h"
+#endif
+
+haptic_config_t haptic_config;
+
+void haptic_init(void) {
+  debug_enable = 1; //Debug is ON!
+  if (!eeconfig_is_enabled()) {
+  	eeconfig_init();
+  }
+  haptic_config.raw = eeconfig_read_haptic();
+  if (haptic_config.mode < 1){
+  haptic_config.mode = 1;
+  }
+  if (!haptic_config.mode){
+  dprintf("No haptic config found in eeprom, setting default configs\n");
+  haptic_reset();
+  }
+  #ifdef SOLENOID_ENABLE
+    solenoid_setup();
+    dprintf("Solenoid driver initialized\n");
+  #endif
+  #ifdef DRV2605L
+    DRV_init();
+    dprintf("DRV2605 driver initialized\n");
+  #endif
+  eeconfig_debug_haptic();
+}
+
+void haptic_task(void) {
+  #ifdef SOLENOID_ENABLE
+  solenoid_check();
+  #endif
+}
+
+void eeconfig_debug_haptic(void) {
+  dprintf("haptic_config eprom\n");
+  dprintf("haptic_config.enable = %d\n", haptic_config.enable);
+  dprintf("haptic_config.mode = %d\n", haptic_config.mode);
+}
+
+void haptic_enable(void) {
+  haptic_config.enable = 1;
+  xprintf("haptic_config.enable = %u\n", haptic_config.enable);
+  eeconfig_update_haptic(haptic_config.raw);
+}
+
+void haptic_disable(void) {
+  haptic_config.enable = 0;
+  xprintf("haptic_config.enable = %u\n", haptic_config.enable);
+  eeconfig_update_haptic(haptic_config.raw);
+}
+
+void haptic_toggle(void) {
+if (haptic_config.enable) {
+  haptic_disable();
+  } else {
+  haptic_enable();
+  }
+  eeconfig_update_haptic(haptic_config.raw);
+}
+
+void haptic_feedback_toggle(void){
+ haptic_config.feedback++;
+  if (haptic_config.feedback >= HAPTIC_FEEDBACK_MAX)
+  haptic_config.feedback = KEY_PRESS;
+  xprintf("haptic_config.feedback = %u\n", !haptic_config.feedback);
+  eeconfig_update_haptic(haptic_config.raw);
+}
+
+void haptic_buzz_toggle(void) {
+  bool buzz_stat = !haptic_config.buzz;
+  haptic_config.buzz = buzz_stat;
+  haptic_set_buzz(buzz_stat);
+}
+
+void haptic_mode_increase(void) {
+  uint8_t mode = haptic_config.mode + 1;
+  #ifdef DRV2605L
+  if (haptic_config.mode >= drv_effect_max) {
+    mode = 1;
+  }
+  #endif
+    haptic_set_mode(mode);
+}
+
+void haptic_mode_decrease(void) {
+  uint8_t mode = haptic_config.mode -1;
+  #ifdef DRV2605L
+  if (haptic_config.mode < 1) {
+    mode = (drv_effect_max - 1);
+  }
+  #endif
+  haptic_set_mode(mode);
+}
+
+void haptic_dwell_increase(void) {
+  uint8_t dwell = haptic_config.dwell + 1;
+  #ifdef SOLENOID_ENABLE
+  if (haptic_config.dwell >= SOLENOID_MAX_DWELL) {
+    dwell = 1;
+  }
+  solenoid_set_dwell(dwell);
+  #endif
+  haptic_set_dwell(dwell);
+}
+
+void haptic_dwell_decrease(void) {
+  uint8_t dwell = haptic_config.dwell -1;
+  #ifdef SOLENOID_ENABLE
+  if (haptic_config.dwell < SOLENOID_MIN_DWELL) {
+    dwell = SOLENOID_MAX_DWELL;
+  }
+  solenoid_set_dwell(dwell);
+  #endif
+  haptic_set_dwell(dwell);
+}
+
+void haptic_reset(void){
+  haptic_config.enable = true;
+  uint8_t feedback = HAPTIC_FEEDBACK_DEFAULT;
+  haptic_config.feedback = feedback;
+  #ifdef DRV2605L
+    uint8_t mode = HAPTIC_MODE_DEFAULT;
+    haptic_config.mode = mode;
+  #endif
+  #ifdef SOLENOID_ENABLE
+    uint8_t dwell = SOLENOID_DEFAULT_DWELL;
+    haptic_config.dwell = dwell;
+  #endif
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
+  xprintf("haptic_config.mode = %u\n", haptic_config.mode);
+}
+
+void haptic_set_feedback(uint8_t feedback) {
+  haptic_config.feedback = feedback;
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
+}
+
+void haptic_set_mode(uint8_t mode) {
+  haptic_config.mode = mode;
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.mode = %u\n", haptic_config.mode);
+}
+
+void haptic_set_buzz(uint8_t buzz) {
+  haptic_config.buzz = buzz;
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.buzz = %u\n", haptic_config.buzz);
+}
+
+void haptic_set_dwell(uint8_t dwell) {
+  haptic_config.dwell = dwell;
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.dwell = %u\n", haptic_config.dwell);
+}
+
+uint8_t haptic_get_mode(void) {
+  if (!haptic_config.enable){
+    return false;
+  }
+  return haptic_config.mode;
+}
+
+uint8_t haptic_get_feedback(void) {
+  if (!haptic_config.enable){
+    return false;
+  }
+  return haptic_config.feedback;
+}
+
+uint8_t haptic_get_dwell(void) {
+  if (!haptic_config.enable){
+    return false;
+  }
+  return haptic_config.dwell;
+}
+
+void haptic_play(void) {
+  #ifdef DRV2605L
+  uint8_t play_eff = 0;
+  play_eff = haptic_config.mode;
+  DRV_pulse(play_eff);
+  #endif
+  #ifdef SOLENOID_ENABLE
+  solenoid_fire();
+  #endif
+}
+
+bool process_haptic(uint16_t keycode, keyrecord_t *record) {
+    if (keycode == HPT_ON && record->event.pressed) { haptic_enable(); }
+    if (keycode == HPT_OFF && record->event.pressed) { haptic_disable(); }
+    if (keycode == HPT_TOG && record->event.pressed) { haptic_toggle(); }
+    if (keycode == HPT_RST && record->event.pressed) { haptic_reset(); }
+    if (keycode == HPT_FBK && record->event.pressed) { haptic_feedback_toggle(); }
+    if (keycode == HPT_BUZ && record->event.pressed) { haptic_buzz_toggle(); }
+    if (keycode == HPT_MODI && record->event.pressed) { haptic_mode_increase(); }
+    if (keycode == HPT_MODD && record->event.pressed) { haptic_mode_decrease(); }
+    if (keycode == HPT_DWLI && record->event.pressed) { haptic_dwell_increase(); }
+    if (keycode == HPT_DWLD && record->event.pressed) { haptic_dwell_decrease(); }
+  if (haptic_config.enable) {
+    if ( record->event.pressed ) {
+	// keypress
+      if (haptic_config.feedback < 2) {
+      haptic_play();
+      }
+    } else {
+    //keyrelease
+      if (haptic_config.feedback > 0) {
+      haptic_play();
+      } 
+    }
+  }
+  return true;
+}
+
+void haptic_shutdown(void) {
+  #ifdef SOLENOID_ENABLE
+  solenoid_shutdown();
+  #endif
+
+}

drivers/haptic/haptic.h

@@ -0,0 +1,82 @@
+/* Copyright 2019 ishtob
+ * Driver for haptic feedback written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include <stdint.h>
+#include <stdbool.h>
+#include "quantum.h"
+#ifdef DRV2605L
+#include "DRV2605L.h"
+#endif
+
+
+#ifndef HAPTIC_FEEDBACK_DEFAULT
+#define HAPTIC_FEEDBACK_DEFAULT 0
+#endif
+#ifndef HAPTIC_MODE_DEFAULT
+#define HAPTIC_MODE_DEFAULT DRV_MODE_DEFAULT
+#endif
+
+/* EEPROM config settings */
+typedef union {
+  uint32_t raw;
+  struct {
+    bool     enable    :1;
+    uint8_t  feedback  :2;
+    uint8_t  mode      :7;
+    bool     buzz      :1;
+    uint8_t  dwell     :7;
+    uint16_t reserved  :16; 
+  };
+} haptic_config_t;
+
+typedef enum HAPTIC_FEEDBACK{
+  KEY_PRESS,
+  KEY_PRESS_RELEASE,
+  KEY_RELEASE,
+  HAPTIC_FEEDBACK_MAX,
+} HAPTIC_FEEDBACK;
+
+bool process_haptic(uint16_t keycode, keyrecord_t *record);
+void haptic_init(void);
+void haptic_task(void);
+void eeconfig_debug_haptic(void);
+void haptic_enable(void);
+void haptic_disable(void);
+void haptic_toggle(void);
+void haptic_feedback_toggle(void);
+void haptic_mode_increase(void);
+void haptic_mode_decrease(void);
+void haptic_mode(uint8_t mode);
+void haptic_reset(void);
+void haptic_set_feedback(uint8_t feedback);
+void haptic_set_mode(uint8_t mode);
+void haptic_set_dwell(uint8_t dwell);
+void haptic_set_buzz(uint8_t buzz);
+void haptic_buzz_toggle(void);
+uint8_t haptic_get_mode(void);
+uint8_t haptic_get_feedback(void);
+void haptic_dwell_increase(void);
+void haptic_dwell_decrease(void);
+
+void haptic_play(void);
+void haptic_shutdown(void);
+
+
+
+
+

drivers/haptic/solenoid.c

@@ -0,0 +1,109 @@
+/* Copyright 2018 mtdjr - modified by ishtob
+ * Driver for solenoid written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <timer.h>
+#include "solenoid.h"
+#include "haptic.h"
+
+bool solenoid_on = false;
+bool solenoid_buzzing = false;
+uint16_t solenoid_start = 0;
+uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL;
+
+extern haptic_config_t haptic_config;
+
+
+void solenoid_buzz_on(void) {
+  haptic_set_buzz(1);
+}
+
+void solenoid_buzz_off(void) {
+  haptic_set_buzz(0);
+}
+
+void solenoid_set_buzz(int buzz) {
+  haptic_set_buzz(buzz);
+}
+
+
+void solenoid_dwell_minus(uint8_t solenoid_dwell) {
+  if (solenoid_dwell > 0) solenoid_dwell--;
+}
+
+void solenoid_dwell_plus(uint8_t solenoid_dwell) {
+  if (solenoid_dwell < SOLENOID_MAX_DWELL) solenoid_dwell++;
+}
+
+void solenoid_set_dwell(uint8_t dwell) {
+  solenoid_dwell = dwell;
+}
+
+void solenoid_stop(void) {
+  writePinLow(SOLENOID_PIN);
+  solenoid_on = false;
+  solenoid_buzzing = false;
+}
+
+void solenoid_fire(void) {
+  if (!haptic_config.buzz && solenoid_on) return;
+  if (haptic_config.buzz && solenoid_buzzing) return;
+
+  solenoid_on = true;
+  solenoid_buzzing = true;
+  solenoid_start = timer_read();
+  writePinHigh(SOLENOID_PIN);
+}
+
+void solenoid_check(void) {
+  uint16_t elapsed = 0;
+
+  if (!solenoid_on) return;
+
+  elapsed = timer_elapsed(solenoid_start);
+
+  //Check if it's time to finish this solenoid click cycle
+  if (elapsed > solenoid_dwell) {
+    solenoid_stop();
+    return;
+  }
+
+  //Check whether to buzz the solenoid on and off
+  if (haptic_config.buzz) {
+    if (elapsed / SOLENOID_MIN_DWELL % 2 == 0){
+      if (!solenoid_buzzing) {
+        solenoid_buzzing = true;
+        writePinHigh(SOLENOID_PIN);
+      }
+    }
+    else {
+      if (solenoid_buzzing) {
+        solenoid_buzzing = false;
+        writePinLow(SOLENOID_PIN);
+      }
+    }
+  }
+}
+
+void solenoid_setup(void) {
+  setPinOutput(SOLENOID_PIN);
+  solenoid_fire();
+}
+
+void solenoid_shutdown(void) {
+  writePinLow(SOLENOID_PIN);
+
+}

drivers/haptic/solenoid.h

@@ -0,0 +1,54 @@
+/* Copyright 2018 mtdjr - modified by ishtob
+ * Driver for solenoid written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifndef SOLENOID_DEFAULT_DWELL
+#define SOLENOID_DEFAULT_DWELL 12
+#endif
+
+#ifndef SOLENOID_MAX_DWELL
+#define SOLENOID_MAX_DWELL 100
+#endif
+
+#ifndef SOLENOID_MIN_DWELL
+#define SOLENOID_MIN_DWELL 4
+#endif
+
+#ifndef SOLENOID_ACTIVE
+#define SOLENOID_ACTIVE false
+#endif
+
+#ifndef SOLENOID_PIN
+#define SOLENOID_PIN F6
+#endif
+
+void solenoid_buzz_on(void);
+void solenoid_buzz_off(void);
+void solenoid_set_buzz(int buzz);
+
+void solenoid_dwell_minus(uint8_t solenoid_dwell);
+void solenoid_dwell_plus(uint8_t solenoid_dwell);
+void solenoid_set_dwell(uint8_t dwell);
+
+void solenoid_stop(void);
+void solenoid_fire(void);
+
+void solenoid_check(void);
+
+void solenoid_setup(void);
+void solenoid_shutdown(void);

drivers/issi/is31fl3731-simple.c

@@ -0,0 +1,246 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "is31fl3731-simple.h"
+#include "i2c_master.h"
+#include "progmem.h"
+#include "print.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define ISSI_ADDR_DEFAULT 0x74
+
+#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00
+#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
+#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+
+#define ISSI_CONF_PICTUREMODE 0x00
+#define ISSI_CONF_AUTOFRAMEMODE 0x04
+#define ISSI_CONF_AUDIOMODE 0x08
+
+#define ISSI_REG_PICTUREFRAME  0x01
+
+#define ISSI_REG_SHUTDOWN 0x0A
+#define ISSI_REG_AUDIOSYNC 0x06
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[LED_DRIVER_COUNT][144];
+bool g_pwm_buffer_update_required = false;
+
+/* There's probably a better way to init this... */
+#if LED_DRIVER_COUNT == 1
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
+#elif LED_DRIVER_COUNT == 2
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
+#elif LED_DRIVER_COUNT == 3
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
+#elif LED_DRIVER_COUNT == 4
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
+#endif
+bool g_led_control_registers_update_required = false;
+
+// This is the bit pattern in the LED control registers
+// (for matrix A, add one to register for matrix B)
+//
+//  reg -  b7  b6  b5  b4  b3  b2  b1  b0
+// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
+// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
+// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
+// 0x06 -  - , - , - , - , - ,B02,B01,B00
+// 0x08 -  - , - , - , - , - , - , - , -
+// 0x0A - B17,B16,B15, - , - , - , - , -
+// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
+// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
+// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
+
+
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+    #if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+              break;
+            }
+        }
+    #else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+    #endif
+}
+
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
+    // assumes bank is already selected
+
+    // transmit PWM registers in 9 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for (int i = 0; i < 144; i += 16) {
+        // set the first register, e.g. 0x24, 0x34, 0x44, etc.
+        g_twi_transfer_buffer[0] = 0x24 + i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
+        for (int j = 0; j < 16; j++) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3731_init(uint8_t addr) {
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, first enable software shutdown,
+    // then set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // select "function register" bank
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+
+    // enable software shutdown
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
+    // this delay was copied from other drivers, might not be needed
+    wait_ms(10);
+
+    // picture mode
+    IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+    // display frame 0
+    IS31FL3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
+    // audio sync off
+    IS31FL3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
+
+    // select bank 0
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+
+    // turn off all LEDs in the LED control register
+    for (int i = 0x00; i <= 0x11; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // turn off all LEDs in the blink control register (not really needed)
+    for (int i = 0x12; i <= 0x23; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // set PWM on all LEDs to 0
+    for (int i = 0x24; i <= 0xB3; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // select "function register" bank
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+
+    // disable software shutdown
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
+
+    // select bank 0 and leave it selected.
+    // most usage after initialization is just writing PWM buffers in bank 0
+    // as there's not much point in double-buffering
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+
+}
+
+void IS31FL3731_set_value(int index, uint8_t value) {
+    if (index >= 0 && index < LED_DRIVER_LED_COUNT) {
+        is31_led led = g_is31_leds[index];
+
+        // Subtract 0x24 to get the second index of g_pwm_buffer
+        g_pwm_buffer[led.driver][led.v - 0x24] = value;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3731_set_value_all(uint8_t value) {
+    for (int i = 0; i < LED_DRIVER_LED_COUNT; i++) {
+        IS31FL3731_set_value(i, value);
+    }
+}
+
+void IS31FL3731_set_led_control_register(uint8_t index, bool value) {
+  is31_led led = g_is31_leds[index];
+
+  uint8_t control_register = (led.v - 0x24) / 8;
+  uint8_t bit_value = (led.v - 0x24) % 8;
+
+    if (value) {
+        g_led_control_registers[led.driver][control_register] |= (1 << bit_value);
+    } else {
+        g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value);
+    }
+
+    g_led_control_registers_update_required = true;
+}
+
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required) {
+        IS31FL3731_write_pwm_buffer(addr, g_pwm_buffer[index]);
+        g_pwm_buffer_update_required = false;
+    }
+}
+
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_led_control_registers_update_required) {
+        for (int i=0; i<18; i++) {
+            IS31FL3731_write_register(addr, i, g_led_control_registers[index][i]);
+        }
+    }
+}

drivers/issi/is31fl3731-simple.h

@@ -0,0 +1,210 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3731_DRIVER_H
+#define IS31FL3731_DRIVER_H
+
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t v;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[LED_DRIVER_LED_COUNT];
+
+void IS31FL3731_init(uint8_t addr);
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3731_set_value(int index, uint8_t value);
+void IS31FL3731_set_value_all(uint8_t value);
+
+void IS31FL3731_set_led_control_register(uint8_t index, bool value);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define C1_1  0x24
+#define C1_2  0x25
+#define C1_3  0x26
+#define C1_4  0x27
+#define C1_5  0x28
+#define C1_6  0x29
+#define C1_7  0x2A
+#define C1_8  0x2B
+
+#define C1_9  0x2C
+#define C1_10 0x2D
+#define C1_11 0x2E
+#define C1_12 0x2F
+#define C1_13 0x30
+#define C1_14 0x31
+#define C1_15 0x32
+#define C1_16 0x33
+
+#define C2_1  0x34
+#define C2_2  0x35
+#define C2_3  0x36
+#define C2_4  0x37
+#define C2_5  0x38
+#define C2_6  0x39
+#define C2_7  0x3A
+#define C2_8  0x3B
+
+#define C2_9  0x3C
+#define C2_10 0x3D
+#define C2_11 0x3E
+#define C2_12 0x3F
+#define C2_13 0x40
+#define C2_14 0x41
+#define C2_15 0x42
+#define C2_16 0x43
+
+#define C3_1  0x44
+#define C3_2  0x45
+#define C3_3  0x46
+#define C3_4  0x47
+#define C3_5  0x48
+#define C3_6  0x49
+#define C3_7  0x4A
+#define C3_8  0x4B
+
+#define C3_9  0x4C
+#define C3_10 0x4D
+#define C3_11 0x4E
+#define C3_12 0x4F
+#define C3_13 0x50
+#define C3_14 0x51
+#define C3_15 0x52
+#define C3_16 0x53
+
+#define C4_1  0x54
+#define C4_2  0x55
+#define C4_3  0x56
+#define C4_4  0x57
+#define C4_5  0x58
+#define C4_6  0x59
+#define C4_7  0x5A
+#define C4_8  0x5B
+
+#define C4_9  0x5C
+#define C4_10 0x5D
+#define C4_11 0x5E
+#define C4_12 0x5F
+#define C4_13 0x60
+#define C4_14 0x61
+#define C4_15 0x62
+#define C4_16 0x63
+
+#define C5_1  0x64
+#define C5_2  0x65
+#define C5_3  0x66
+#define C5_4  0x67
+#define C5_5  0x68
+#define C5_6  0x69
+#define C5_7  0x6A
+#define C5_8  0x6B
+
+#define C5_9  0x6C
+#define C5_10 0x6D
+#define C5_11 0x6E
+#define C5_12 0x6F
+#define C5_13 0x70
+#define C5_14 0x71
+#define C5_15 0x72
+#define C5_16 0x73
+
+#define C6_1  0x74
+#define C6_2  0x75
+#define C6_3  0x76
+#define C6_4  0x77
+#define C6_5  0x78
+#define C6_6  0x79
+#define C6_7  0x7A
+#define C6_8  0x7B
+
+#define C6_9  0x7C
+#define C6_10 0x7D
+#define C6_11 0x7E
+#define C6_12 0x7F
+#define C6_13 0x80
+#define C6_14 0x81
+#define C6_15 0x82
+#define C6_16 0x83
+
+#define C7_1  0x84
+#define C7_2  0x85
+#define C7_3  0x86
+#define C7_4  0x87
+#define C7_5  0x88
+#define C7_6  0x89
+#define C7_7  0x8A
+#define C7_8  0x8B
+
+#define C7_9  0x8C
+#define C7_10 0x8D
+#define C7_11 0x8E
+#define C7_12 0x8F
+#define C7_13 0x90
+#define C7_14 0x91
+#define C7_15 0x92
+#define C7_16 0x93
+
+#define C8_1  0x94
+#define C8_2  0x95
+#define C8_3  0x96
+#define C8_4  0x97
+#define C8_5  0x98
+#define C8_6  0x99
+#define C8_7  0x9A
+#define C8_8  0x9B
+
+#define C8_9  0x9C
+#define C8_10 0x9D
+#define C8_11 0x9E
+#define C8_12 0x9F
+#define C8_13 0xA0
+#define C8_14 0xA1
+#define C8_15 0xA2
+#define C8_16 0xA3
+
+#define C9_1  0xA4
+#define C9_2  0xA5
+#define C9_3  0xA6
+#define C9_4  0xA7
+#define C9_5  0xA8
+#define C9_6  0xA9
+#define C9_7  0xAA
+#define C9_8  0xAB
+
+#define C9_9  0xAC
+#define C9_10 0xAD
+#define C9_11 0xAE
+#define C9_12 0xAF
+#define C9_13 0xB0
+#define C9_14 0xB1
+#define C9_15 0xB2
+#define C9_16 0xB3
+
+
+#endif // IS31FL3731_DRIVER_H

drivers/qwiic/micro_oled.c

@@ -28,6 +28,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "micro_oled.h"
+#include <print.h>
 #include <stdlib.h>
 #include "util/font5x7.h"
 #include "util/font8x16.h"
@@ -309,12 +310,11 @@ static uint8_t micro_oled_screen_buffer[] = {
 #else
 //catchall for custom screen szies
     static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {0};
-#endif  
+#endif
 
 
 
 void micro_oled_init(void) {
-
   i2c_init();
   i2c_start(I2C_ADDRESS_SA0_1);
 

keyboards/1upkeyboards/1up60hse/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, E6, D1, D0, D2, D3, D5, D6, D7 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B7

keyboards/1upkeyboards/1up60hte/readme.md

@@ -1,10 +1,15 @@
-# 1up60hte (Hot Swap Edition - Tsangan)
+
+# 1up60hte (Hot Swap Tsangan Edition)
+
+![1up60hte](https://www.1upkeyboards.com/wp-content/uploads/2019/01/PCB-60-HS-TSA-both.jpg)
+
 
 A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a Tsangan layout.
 
 Keyboard Maintainer: [Bubnick](https://github.com/bubnick)  
 Hardware Supported: 1up60hte 60% PCB  
-Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/)
+
+Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/1upkeyboards/super16/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { D4, C6, F6, F7 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 /*

keyboards/40percentclub/25/config.h

@@ -54,7 +54,7 @@
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN B7

keyboards/40percentclub/4x4/config.h

@@ -30,7 +30,7 @@
 #define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN C7

keyboards/40percentclub/5x5/config.h

@@ -30,7 +30,7 @@
 #define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN B7

keyboards/40percentclub/6lit/config.h

@@ -55,7 +55,7 @@
 #define MATRIX_COL_PINS { F6, F7, B1 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN B7

keyboards/40percentclub/foobar/config.h

@@ -55,7 +55,7 @@
 #define MATRIX_COL_PINS { F6, F7, B1, B3, B2 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN B7

keyboards/40percentclub/half_n_half/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION ROW2COL
 
 /*

keyboards/40percentclub/i75/promicro/config.h

@@ -36,5 +36,5 @@
 #define MATRIX_COL_PINS { B5, B6, B2, B3, B1, F7, F6, F5, F4 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW

keyboards/40percentclub/i75/teensy2/config.h

@@ -36,5 +36,5 @@
 #define MATRIX_COL_PINS { C6, C7, D6, D7, B5, B6, F7, F6, F5 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW

keyboards/40percentclub/nori/config.h

@@ -44,7 +44,7 @@
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D4, C6, D7, E6 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B5

keyboards/40percentclub/ut47/config.h

@@ -35,7 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN B7

keyboards/412_64/config.h

@@ -30,7 +30,7 @@
 #define MATRIX_COL_PINS { B0, D2, D0, D1, D4, C6, D7, E6 }
 #define UNUSED_PINS { B4, B5, B6, B7, C7, F0, F1 }
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN C7

keyboards/acr60/keymaps/default/keymap.c

@@ -1,6 +1,10 @@
 #include QMK_KEYBOARD_H
 
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+enum custom_keycodes {
+  SFT_ESC = SAFE_RANGE
+};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
@@ -13,7 +17,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * via the function actions code at the bottom.
  */
 	LAYOUT(
-		F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
+		SFT_ESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
 		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
@@ -34,21 +38,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
 };
 
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case SFT_ESC:
       if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
+        if (get_mods() & MODS_SHIFT_MASK) {
           add_key(KC_GRV);
           send_keyboard_report();
         } else {
@@ -56,7 +50,7 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
           send_keyboard_report();
         }
       } else {
-        if (shift_esc_shift_mask) {
+        if (get_mods() & MODS_SHIFT_MASK) {
           del_key(KC_GRV);
           send_keyboard_report();
         } else {
@@ -64,6 +58,10 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
           send_keyboard_report();
         }
       }
-      break;
+
+      return false;
+
+    default:
+      return true;
   }
 }

keyboards/aeboards/aegis/aegis.c

@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)

keyboards/aeboards/aegis/aegis.h

@@ -0,0 +1,43 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define _____ KC_NO
+
+#define LAYOUT_aegis( \
+  K0000, K0100, K0001, K0101,        K0002, K0102, K0003, K0103, K0004, K0104, K0005, K0105, K0006, K0106, K0007, K0107, K0008, \
+  K0200, K0300, K0201, K0301,        K0202, K0302, K0203, K0303, K0204, K0304, K0205, K0305, K0206, K0306, K0207, K0307, K0208, K0308, K0108, \
+  K0400, K0500, K0401, K0501,        K0402, K0502, K0403, K0503, K0404, K0504, K0405, K0505, K0406, K0506, K0407, K0507, K0408, K0508, \
+  K0600, K0700, K0601, K0701,        K0602, K0702, K0603, K0703, K0604, K0704, K0605, K0705, K0606, K0706, K0607, K0707, K0608, \
+  K0800, K0900, K0801, K0901,        K0802, K0902, K0803, K0903, K0804, K0904, K0805, K0905, K0806, K0906, K0807, K0907, K0808, K0908, \
+  K1000, K1100, K1001,        K1101, K1002, K1102, K1003, K1103,                      K1105,                      K1107, K1008, K1108 \
+) { \
+  { K0000, K0001, K0002, K0003, K0004, K0005, K0006, K0007, K0008 }, \
+  { K0100, K0101, K0102, K0103, K0104, K0105, K0106, K0107, K0108 }, \
+  { K0200, K0201, K0202, K0203, K0204, K0205, K0206, K0207, K0208 }, \
+  { K0300, K0301, K0302, K0303, K0304, K0305, K0306, K0307, K0308 }, \
+  { K0400, K0401, K0402, K0403, K0404, K0405, K0406, K0407, K0408 }, \
+  { K0500, K0501, K0502, K0503, K0504, K0505, K0506, K0507, K0508 }, \
+  { K0600, K0601, K0602, K0603, K0604, K0605, K0606, K0607, K0608 }, \
+  { K0700, K0701, K0702, K0703, K0704, K0705, K0706, K0707, _____ }, \
+  { K0800, K0801, K0802, K0803, K0804, K0805, K0806, K0807, K0808 }, \
+  { K0900, K0901, K0902, K0903, K0904, K0905, K0906, K0907, K0908 }, \
+  { K1000, K1001, K1002, K1003, _____, _____, _____, _____, K1008 }, \
+  { K1100, K1101, K1102, K1103, _____, K1105, _____, K1107, K1108 } \
+}

keyboards/aeboards/aegis/config.h

@@ -0,0 +1,71 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4145 // "AE"
+#define PRODUCT_ID      0x0807 // 1800 -> 0x0708 -> 0x0807 ;-)
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AEboards
+#define PRODUCT         Aegis
+#define DESCRIPTION     1800 Left Handed Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 9
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F5, F6, E6, F7, D1, D0, D6, D4, B4, D7, B6, B5 }
+#define MATRIX_COL_PINS { C7, C6, B7, D2, D3, B3, B2, B1, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+//#define WT_MONO_BACKLIGHT
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*12*9*2)) = (35+864)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 899
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 125
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+

keyboards/aeboards/aegis/keymaps/default/keymap.c

@@ -0,0 +1,72 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * ,-------------------.  ,-------------------------------------------------------------.     
+   * |End |Home|PgDn|PgUp|  |Esc| F1| F2| F3| F4|    | F5| F6| F7| F8|    | F9|F10|F11|F12|
+   * `-------------------'  `-------------------------------------------------------------'
+   *           
+   * |-------------------|  ,-------------------------------------------------------------. 
+   * |-   | *  | /  |BSPC|  | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|pipe| del| 
+   * |-------------------|  |-------------------------------------------------------------| 
+   * |    | 9  | 8  | 7  |  |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BSPC  | 
+   * |  + |--------------|  |-------------------------------------------------------------| 
+   * |    | 6  | 5  | 4  |  |Ctrl   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return   | 
+   * |-------------------|  |-------------------------------------------------------------|
+   * |    | 3  | 2  | 1  | |Up| |Shift|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | FN |
+   * | ENT|-------------------------------------------------------------------------------|
+   * |    | 0       | left |Dn| rhgt | FN  | Alt |      Space           |Alt |Gui| ctrl|  |
+   * `------------------------------------------------------------------------------------'
+   */
+  [0] = LAYOUT_aegis(
+    KC_END , KC_HOME, KC_PGDN, KC_PGUP, KC_ESC , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 ,
+    KC_PMNS, KC_PAST, KC_PSLS, KC_BSPC, KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_DEL,
+    KC_PPLS, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC, 
+    KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_LCTL, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT , 
+    KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_UP  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, MO(1), 
+    KC_PENT, KC_PDOT, KC_P0  , KC_LEFT, KC_DOWN, KC_RGHT, MO(1),   KC_LALT,          KC_SPC,                                               KC_RALT, KC_RGUI,  KC_RCTL
+  ),
+
+  [1] = LAYOUT_aegis(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_UP  , KC_PGDN, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_ENT , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                                              KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [2] = LAYOUT_aegis(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                                              KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [3] = LAYOUT_aegis(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                                              KC_TRNS, KC_TRNS, KC_TRNS
+  )
+
+};

keyboards/aeboards/aegis/keymaps/default/readme.md

@@ -0,0 +1,2 @@
+# The Default Aegis Layout
+

keyboards/aeboards/aegis/keymaps/via/keymap.c

@@ -0,0 +1,72 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * ,-------------------.  ,-------------------------------------------------------------.     
+   * |End |Home|PgDn|PgUp|  |Esc| F1| F2| F3| F4|    | F5| F6| F7| F8|    | F9|F10|F11|F12|
+   * `-------------------'  `-------------------------------------------------------------'
+   *           
+   * |-------------------|  ,-------------------------------------------------------------. 
+   * |-   | *  | /  |BSPC|  | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|pipe| del| 
+   * |-------------------|  |-------------------------------------------------------------| 
+   * |    | 9  | 8  | 7  |  |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BSPC  | 
+   * |  + |--------------|  |-------------------------------------------------------------| 
+   * |    | 6  | 5  | 4  |  |Ctrl   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return   | 
+   * |-------------------|  |-------------------------------------------------------------|
+   * |    | 3  | 2  | 1  | |Up| |Shift|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | FN |
+   * | ENT|-------------------------------------------------------------------------------|
+   * |    | 0       | left |Dn| rhgt | FN  | Alt |      Space           |Alt |Gui| ctrl|  |
+   * `------------------------------------------------------------------------------------'
+   */
+  [0] = LAYOUT_aegis(
+    KC_END , KC_HOME, KC_PGDN, KC_PGUP, KC_ESC , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 ,
+    KC_PMNS, KC_PAST, KC_PSLS, KC_BSPC, KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_DEL,
+    KC_PPLS, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC, 
+    KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_LCTL, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT , 
+    KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_UP  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, MO(1), 
+    KC_PENT, KC_PDOT, KC_P0  , KC_LEFT, KC_DOWN, KC_RGHT, MO(1),   KC_LALT,          KC_SPC,                                               KC_RALT, KC_RGUI,  KC_RCTL
+  ),
+
+  [1] = LAYOUT_aegis(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_UP  , KC_PGDN, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_ENT , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                                              KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [2] = LAYOUT_aegis(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                                              KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [3] = LAYOUT_aegis(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                                              KC_TRNS, KC_TRNS, KC_TRNS
+  )
+
+};

keyboards/aeboards/aegis/keymaps/via/readme.md

@@ -0,0 +1,2 @@
+# The VIA Aegis Layout
+

keyboards/aeboards/aegis/keymaps/via/rules.mk

@@ -0,0 +1,68 @@
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes

keyboards/aeboards/aegis/readme.md

@@ -0,0 +1,14 @@
+AEGIS
+===
+
+A left handed g80-1800-esque keyboard by [aeboards](https://aeboards.com/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: AEGIS 
+Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aeboards/aegis:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aeboards/aegis/rules.mk

@@ -0,0 +1,65 @@
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/ai03/lunar/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 /*

keyboards/al1/config.h

@@ -43,7 +43,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
 */
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B6

keyboards/alf/dc60/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B6

keyboards/amj40/keymaps/default/keymap.c

@@ -21,14 +21,6 @@ enum custom_keycodes {
   ADJUST,
 };
 
-
-
-
-
-// increase readability 
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         /* Default Layer
      * ,-----------------------------------------------------------.
@@ -45,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,   KC_BSPC,\
         KC_TAB,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_ENT,\
         KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,\
-        KC_LCTL, KC_LGUI, KC_LALT,          F(0),           F(1),        F(2), KC_RALT, KC_RCTL \
+        KC_LCTL, KC_LGUI, KC_LALT,          LT(_LOWER, KC_SPC),LT(_RAISE, KC_SPC),LT(_ADJUST, KC_LGUI), KC_RALT, KC_RCTL \
 		),
 
     /* Function Layer 1 HHKB style
@@ -106,24 +98,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-
-		
-
-enum function_id {
-    LAUNCH,
-    RGBLED_TOGGLE,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-	[0]  = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
-	[1]  = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC),
-	[2]  = ACTION_LAYER_TAP_KEY(_ADJUST, KC_LGUI),
-
-};
-
-
-
-
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
     // MACRODOWN only works in this function

keyboards/amj40/keymaps/fabian/keymap.c

@@ -50,9 +50,6 @@ enum custom_keycodes {
   EXT_PLV
 };
 
-#define XXXXXXX KC_NO
-#define _______ KC_TRNS
-
 #define CTL_ESC CTL_T(KC_ESC)  // Tap for Escape, hold for Control
 #define HPR_TAB ALL_T(KC_TAB)  // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift)
 #define MEH_GRV MEH_T(KC_GRV)  // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift)

keyboards/amj40/keymaps/myee/keymap.c

@@ -22,10 +22,6 @@ enum custom_keycodes {
   ADJUST,
 };
 
-// increase readability 
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
     [_QWERTY] = LAYOUT( \

keyboards/amj60/keymaps/default/keymap.c

@@ -11,10 +11,6 @@
 // dual-role shortcuts
 #define SPACEDUAL LT(_SPC, KC_SPACE)
 
-
-// increase readability 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Keymap _DEF: Default Layer
      * ,-----------------------------------------------------------.

keyboards/amj60/keymaps/iso_split_rshift/keymap.c

@@ -30,10 +30,6 @@
 #define GER_BRC_L RALT(KC_8)    // [
 #define GER_BRC_R RALT(KC_9)    // ]
 
-// increase readability 
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Keymap _DEF: Default Layer
      * ,-----------------------------------------------------------.
@@ -111,21 +107,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [_SFX] = LAYOUT_iso_splitrshift(
         RESET,   _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9, _______, _______, _______, KC_BSPC, \
         _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6, _______, _______, _______, KC_BSLS, \
-        _______, F(2),    F(3),    _______, _______, _______, _______, KC_1,    KC_2,    KC_3, _______, _______, XXXXXXX, KC_ENT,  \
-        _______, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    _______, _______, KC_0, _______, KC_SLSH, KC_UP,   _______, \
+        _______, _______, _______, _______, _______, _______, _______, KC_1,    KC_2,    KC_3, _______, _______, XXXXXXX, KC_ENT,  \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_0, _______, KC_SLSH, KC_UP,   _______, \
         _______, _______, _______,                            _______,                         _______, KC_LEFT, KC_DOWN, KC_RGHT),
 };
 
-enum function_id {
-    LAUNCH,
-    RGBLED_TOGGLE,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [1]  = ACTION_FUNCTION(LAUNCH),
-    [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
-};
-
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
     // MACRODOWN only works in this function

keyboards/amj60/keymaps/maximized/keymap.c

@@ -11,10 +11,6 @@
 // dual-role shortcuts
 #define SPACEDUAL LT(_SPC, KC_SPACE)
 
-
-// increase readability 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Keymap _DEF: Default Layer
      * ,-----------------------------------------------------------.

keyboards/amj96/config.h

@@ -44,7 +44,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN D4

keyboards/amjpad/keymaps/default/keymap.c

@@ -11,8 +11,6 @@
 #define _BL 0
 #define _FL 1
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _BL: (Base Layer) Default Layer
    * ,-------------------.

keyboards/amjpad/keymaps/max/keymap.c

@@ -14,8 +14,6 @@
 #define _BL 0
 #define _FL 1
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _BL: (Base Layer) Default Layer
    * ,-------------------.

keyboards/amjpad/keymaps/ortho_left/keymap.c

@@ -11,8 +11,6 @@
 #define _BL 0
 #define _FL 1
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _BL: (Base Layer) Default Layer
    * ,-------------------.

keyboards/amjpad/keymaps/ortho_right/keymap.c

@@ -11,8 +11,6 @@
 #define _BL 0
 #define _FL 1
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _BL: (Base Layer) Default Layer
    * ,-------------------.

keyboards/atom47/keymaps/LEdiodes/keymap.c

@@ -6,8 +6,6 @@
 #define _L2 2
 #define _L3 3
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_L0] = LAYOUT(
   KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\

keyboards/atom47/keymaps/default/keymap.c

@@ -10,8 +10,6 @@
 #define _FN1 2 //Fn1
 #define _PN 3 //Pn
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_MA] = LAYOUT(
   KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\

keyboards/atom47/keymaps/maartenwut/keymap.c

@@ -9,8 +9,6 @@
 #define _LO 1 //FN1
 #define _RA 2 //FN
 
-#define _______ KC_TRNS
-
 enum custom_keycodes {
     CTRLZ = SAFE_RANGE,
     CTRLX,

keyboards/atomic/keymaps/default/keymap.c

@@ -1,9 +1,7 @@
 #include QMK_KEYBOARD_H
 
 // Fillers to make layering more clear
-#define _______ KC_TRNS
 #define ___T___ KC_TRNS
-#define XXXXXXX KC_NO
 
 // Layer shorthand
 #define _QW 0

keyboards/atomic/keymaps/pvc/keymap.c

@@ -104,8 +104,6 @@ enum keyboard_macros {
 #define TG_NKRO             MAGIC_TOGGLE_NKRO
 #define OS_SHFT             KC_FN0
 
-#define _______             KC_TRNS
-#define XXXXXXX             KC_NO
 #define ________________    _______, _______
 #define XXXXXXXXXXXXXXXX    XXXXXXX, XXXXXXX
 
@@ -608,4 +606,4 @@ void music_scale_user(void)
 	PLAY_SONG(music_scale);
 }
 
-#endif /* AUDIO_ENABLE */
+#endif /* AUDIO_ENABLE */

keyboards/atreus/keymaps/erlandsona/keymap.c

@@ -11,11 +11,6 @@
 #define NUMS 1
 #define MOUS 2
 
-// Some quick aliases, just to make it look pretty
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [BASE] = LAYOUT( /* Qwerty */
     KC_Q       , KC_W   , KC_E   , KC_R   ,  KC_T   ,                 KC_Y  ,  KC_U   , KC_I   , KC_O   , KC_P          ,

keyboards/atreus/keymaps/xk/keymap.c

@@ -57,9 +57,6 @@ WINSH,
 OSX,
 };
 
-#define _______     KC_TRNS
-#define XXXXXXX     KC_NO
-
 // action-TAP for key/mod behavior LT(layer, KC)
 #define XK_TAB      LT(_KAMELOC, KC_TAB)
 #define XK_BSP      LT(_KAMELOC, KC_BSPC)

keyboards/atreus/keymaps/xyverz/keymap.c

@@ -38,10 +38,6 @@ enum planck_keycodes {
 #define ESCTRL CTL_T(KC_ESC)
 #define TABALT ALT_T(KC_TAB)
 
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Dvorak Layer
 	,----------------------------------.              ,----------------------------------.

keyboards/atreus/keymaps/yttyx/keymap.c

@@ -9,9 +9,6 @@ enum layers {
   R3            // (momentary)
 };
 
-#define xxxxxxx    KC_NO
-#define _______    KC_TRNS
-
 // Aliases from replicaJunction's atreus layout
 #define KCX_LST   LSFT(KC_TAB)
 #define KX_COPY   LCTL(KC_C)
@@ -58,7 +55,7 @@ const uint16_t PROGMEM keymaps[][ MATRIX_ROWS ][ MATRIX_COLS ] = {
   [L1] = LAYOUT(
     KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,       KC_8,    KC_9,    KC_0,
     KC_TAB,  KC_QUES, KC_EQL,  KC_MINS, KC_UNDS,                   KC_QUOT, LSFT(KC_2), KC_PLUS, KC_ASTR, KC_ENT,
-    KC_ESC,  KC_EXLM, KC_AMPR, xxxxxxx, xxxxxxx,                   _______, _______,    _______, xxxxxxx, _______,
+    KC_ESC,  KC_EXLM, KC_AMPR, XXXXXXX, XXXXXXX,                   _______, _______,    _______, XXXXXXX, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______
   ),
 
@@ -74,9 +71,9 @@ const uint16_t PROGMEM keymaps[][ MATRIX_ROWS ][ MATRIX_COLS ] = {
   '---------------------------------------------------------------------------'
   */
   [R1] = LAYOUT(
-    KC_LABK, KC_RABK,  KC_LCBR,  KC_RCBR, KX_AT,                     KC_DLR,  KC_HASH,    xxxxxxx,       xxxxxxx, MO(R3),
+    KC_LABK, KC_RABK,  KC_LCBR,  KC_RCBR, KX_AT,                     KC_DLR,  KC_HASH,    XXXXXXX,       XXXXXXX, MO(R3),
     KC_LBRC, KC_RBRC,  KC_LPRN,  KC_RPRN, KC_NUHS,                   KC_QUOT, LSFT(KC_2), LSFT(KC_NUHS), KC_GRV,  KC_CAPS,
-    KC_SLSH, KC_NUBS,  KC_CIRC,  KX_PIPE, KC_PERC,                   _______, _______,    _______,       xxxxxxx, KC_PSCR,
+    KC_SLSH, KC_NUBS,  KC_CIRC,  KX_PIPE, KC_PERC,                   _______, _______,    _______,       XXXXXXX, KC_PSCR,
     _______, _______,  _______,  KC_DEL,  _______, _______, _______, _______, _______,    _______,       _______, _______
   ),
 
@@ -94,7 +91,7 @@ const uint16_t PROGMEM keymaps[][ MATRIX_ROWS ][ MATRIX_COLS ] = {
   [R2] = LAYOUT(
     KC_F12,  KC_F11,  KC_F10,  KC_F9,  KX_COPY,                   KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_INS, 
     KC_F8,   KC_F7,   KC_F6,   KC_F5,  KX_PAST,                   KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_ENT,
-    KC_F4,   KC_F3,   KC_F2,   KC_F1,  KX_CUT,                    KCX_LST, xxxxxxx, KC_TAB,  xxxxxxx, xxxxxxx, 
+    KC_F4,   KC_F3,   KC_F2,   KC_F1,  KX_CUT,                    KCX_LST, XXXXXXX, KC_TAB,  XXXXXXX, XXXXXXX, 
     _______, _______, _______, KC_DEL, KX_UNDO, _______, _______, _______, _______, _______, _______, KX_WINR
   ),
 
@@ -110,10 +107,10 @@ const uint16_t PROGMEM keymaps[][ MATRIX_ROWS ][ MATRIX_COLS ] = {
   '---------------------------------------------------------------'
   */
   [R3] = LAYOUT(
-    RESET,   xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx,                   xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, _______,
-    xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx,                   xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx,
-    xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx,                   xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, 
-    xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx, xxxxxxx
+    RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
   )
 };
 

keyboards/atreus62/keymaps/pcewing/keymap.c

@@ -1,6 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define _______ KC_TRNS
 #define FN MO(_FN)
 #define TODO KC_NO
 

keyboards/atreus62/keymaps/xyverz/keymap.c

@@ -63,10 +63,6 @@ enum atreus52_keycodes {
   RAISE
 };
 
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 // Aliases to make the keymap clearer.
 #define CTL_ENT CTL_T(KC_ENT)
 

keyboards/baguette/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { B6, C6, C7, F7, F6, F5, F4, F1, F0, B0, D0, D1, D2, D3, D5, D4 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B7

keyboards/bigswitch/keymaps/wanleg/config.h

@@ -22,7 +22,7 @@
 #undef MATRIX_COL_PINS
 #define MATRIX_COL_PINS { B6 }
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #undef DIODE_DIRECTION
 #define DIODE_DIRECTION COL2ROW
 

keyboards/blockey/config.h

@@ -46,7 +46,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { D0, B4, C6, D7, F4, F5, F7 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 /* ws2812 RGB LED */

keyboards/blockey/keymaps/default/keymap.c

@@ -20,11 +20,6 @@
 extern rgblight_config_t rgblight_config;
 #endif
 
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT(
     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \

keyboards/blockey/keymaps/eucalyn/keymap.c

@@ -20,11 +20,6 @@
 extern rgblight_config_t rgblight_config;
 #endif
 
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT(
     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \