increase size of note counter variable to avoid overflow

* Add HOME/END keys as upper/lower on arrow-up/down

* Reduce .hex file size by turning off unneeded options

* Put digit keypad onto left hand upon RAISE; this will sometimes be preferable to double-hits of right hand

* Latest super latest version merge

* cbbrowne keymap for XD75re

* starting notes on XD75re keymap plans

* First draft of bottom row of QWERTY

* Switch my special bottom line over to QCENT

* Dunno

* Filling in wanted keys, bit by bit...

* Add copyright, extra macro

* Clean up comments, remove some experimental code I didn't like

* TODO plans for xd75re

* clean up keyboard layout

* QCENT2 is my new experiment for the main keyboard...

* Add a few more main layer keys, and modify LOWER to shift things outwards to conform with main layer

* Clean up RAISE layer to conform with main layer, remove QCENT layer as QCENT2 is the new thing

* More xd75 changes, now that I actually have it in hand

* shift keymap around, as original attempt was a bit too aggressive in keeping to the edges

* more revs to XD75

* Dropping parts of the centre keypad in favor of Keys I Really Need

* Improve documentation to conform with how builds are done now

* Improve documentation to conform with how builds are done now

* Add cbbrowne rules file as alternative to having the rules in Makefile

* Makefile not needed anymore for individual keymap

* Some revs to my keymapping

* Add {}

* Add PGUP/PGDN

* Shifted some middle-range keys around

* Needed Tilde, Backquote, and to shift RESET onto FUNCTION layer

* Wanted ~

* cbbrowne hasn't anything to do with hadron keymaps

* trim unneeded bits

* I prefer OrgMode for my notes

* Have a right-alt

* Layer keys make LED colors change

* Add sample user rules for cbbrowne

* Add source of xd75 rules

* Individualized xd75 rules

* Adopt LAYOUT to genericize the layout as an ortholinear 5x15 keyboard

common_features.mk

@@ -266,6 +266,11 @@ ifeq ($(strip $(HD44780_ENABLE)), yes)
     OPT_DEFS += -DHD44780_ENABLE
 endif
 
+ifeq ($(strip $(VELOCIKEY_ENABLE)), yes)
+    OPT_DEFS += -DVELOCIKEY_ENABLE
+    SRC += $(QUANTUM_DIR)/velocikey.c
+endif
+
 ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes)
     OPT_DEFS += -DDYNAMIC_KEYMAP_ENABLE
     SRC += $(QUANTUM_DIR)/dynamic_keymap.c
@@ -293,19 +298,11 @@ ifneq ($(strip $(CUSTOM_MATRIX)), yes)
 endif
 
 DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
-# Debounce Modules. If implemented in matrix.c, don't use these.
+# Debounce Modules. Set DEBOUNCE_TYPE=custom if including one manually.
 DEBOUNCE_TYPE?= sym_g
-VALID_DEBOUNCE_TYPES := sym_g eager_pk custom
-ifeq ($(filter $(DEBOUNCE_TYPE),$(VALID_DEBOUNCE_TYPES)),)
-    $(error DEBOUNCE_TYPE="$(DEBOUNCE_TYPE)" is not a valid debounce algorithm)
+ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
 endif
-ifeq ($(strip $(DEBOUNCE_TYPE)), sym_g)
-    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_sym_g.c
-else ifeq ($(strip $(DEBOUNCE_TYPE)), eager_pk)
-    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_eager_pk.c
-endif
-
-
 
 ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
     OPT_DEFS += -DSPLIT_KEYBOARD

docs/_summary.md

@@ -60,6 +60,7 @@
   * [Key Lock](feature_key_lock.md)
   * [Layouts](feature_layouts.md)
   * [Leader Key](feature_leader_key.md)
+  * [LED Matrix](feature_led_matrix.md)
   * [Macros](feature_macros.md)
   * [Mouse Keys](feature_mouse_keys.md)
   * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
@@ -76,6 +77,7 @@
   * [Thermal Printer](feature_thermal_printer.md)
   * [Unicode](feature_unicode.md)
   * [Userspace](feature_userspace.md)
+  * [Velocikey](feature_velocikey.md)
 
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)

docs/config_options.md

@@ -68,11 +68,11 @@ This is a C header file that is one of the first things included, and will persi
 * `#define C6_AUDIO`
   * enables audio on pin C6
 * `#define B5_AUDIO`
-  * enables audio on pin B5 (duophony is enables if one of B[5-7]_AUDIO is enabled along with one of C[4-6]_AUDIO)
+  * enables audio on pin B5 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define B6_AUDIO`
-  * enables audio on pin B6 (duophony is enables if one of B[5-7]_AUDIO is enabled along with one of C[4-6]_AUDIO)
+  * enables audio on pin B6 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define B7_AUDIO`
-  * enables audio on pin B7 (duophony is enables if one of B[5-7]_AUDIO is enabled along with one of C[4-6]_AUDIO)
+  * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define BACKLIGHT_PIN B7`
   * pin of the backlight - B5, B6, B7 use PWM, others use softPWM
 * `#define BACKLIGHT_LEVELS 3`
@@ -307,8 +307,8 @@ Use these to enable or disable building certain features. The more you have enab
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 * `CUSTOM_MATRIX`
   * Allows replacing the standard matrix scanning routine with a custom one.
-* `CUSTOM_DEBOUNCE`
-  * Allows replacing the standard key debouncing routine with a custom one.
+* `DEBOUNCE_TYPE`
+  * Allows replacing the standard key debouncing routine with an alternative or custom one.
 * `WAIT_FOR_USB`
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`

docs/contributing.md

@@ -137,7 +137,7 @@ Most first-time QMK contributors start with their personal keymaps. We try to ke
 * All Keymap PR's are squashed, so if you care about how your commits are squashed you should do it yourself
 * Do not lump features in with keymap PR's. Submit the feature first and then a second PR for the keymap.
 * Do not include `Makefile`s in your keymap folder (they're no longer used)
-* Update copyrights in file headers (look for `REPLACE_WITH_YOUR_NAME `)
+* Update copyrights in file headers (look for `%YOUR_NAME%`)
 
 ## Keyboards
 
@@ -150,7 +150,7 @@ We also ask that you follow these guidelines:
 * Do not lump core features in with new keyboards. Submit the feature first and then submit a separate PR for the keyboard.
 * Name `.c`/`.h` file after the immediate parent folder, eg `/keyboards/<kb1>/<kb2>/<kb2>.[ch]`
 * Do not include `Makefile`s in your keyboard folder (they're no longer used)
-* Update copyrights in file headers (look for `REPLACE_WITH_YOUR_NAME `)
+* Update copyrights in file headers (look for `%YOUR_NAME%`)
 
 ## Quantum/TMK Core
 

docs/custom_quantum_functions.md

@@ -321,7 +321,7 @@ uint32_t layer_state_set_user(uint32_t state) {
 ```
 ### `layer_state_set_*` Function Documentation
 
-* Keyboard/Revision: `void uint32_t layer_state_set_kb(uint32_t state)`
+* Keyboard/Revision: `uint32_t layer_state_set_kb(uint32_t state)`
 * Keymap: `uint32_t layer_state_set_user(uint32_t state)`
 
 The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)

docs/faq_keymap.md

@@ -151,13 +151,13 @@ This turns right modifier keys into arrow keys when the keys are tapped while st
  */
 const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty */
-    [0] = KEYMAP( \
+    [0] = LAYOUT( \
         ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS,BSPC, \
         TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
         LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \
         LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,FN0, ESC, \
         FN4, LGUI,LALT,          SPC,                     APP, FN2, FN1, FN3),
-    [1] = KEYMAP( \
+    [1] = LAYOUT( \
         GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, TRNS,TRNS, \
         TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
         TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \

docs/feature_advanced_keycodes.md

@@ -11,7 +11,7 @@ People often define custom names using `#define`. For example:
 #define ALT_TAB LALT(KC_TAB)
 ```
 
-This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping it more readable.
+This will allow you to use `FN_CAPS` and `ALT_TAB` in your keymap, keeping it more readable.
 
 ## Caveats
 

docs/feature_debounce_type.md

@@ -2,45 +2,38 @@
 
 QMK supports multiple debounce algorithms through its debounce API.
 
-The underlying debounce algorithm is determined by which matrix.c file you are using.
-
 The logic for which debounce method called is below. It checks various defines that you have set in rules.mk
 
 ```
+DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
 DEBOUNCE_TYPE?= sym_g
-VALID_DEBOUNCE_TYPES := sym_g eager_pk custom
-ifeq ($(filter $(DEBOUNCE_TYPE),$(VALID_DEBOUNCE_TYPES)),)
-    $(error DEBOUNCE_TYPE="$(DEBOUNCE_TYPE)" is not a valid debounce algorithm)
-endif
-ifeq ($(strip $(DEBOUNCE_TYPE)), sym_g)
-    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_sym_g.c
-else ifeq ($(strip $(DEBOUNCE_TYPE)), eager_pk)
-    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_eager_pk.c
+ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
 endif
 ```
 
 # Debounce selection
 
-| DEBOUNCE_ALGO    | Description                                                 | What to do                    |
-| -------------    | ---------------------------------------------------         | ----------------------------- |
-| Not defined      | You are using the included matrix.c and debounce.c          | Nothing. Debounce_sym_g will be compiled, and used if necessary |
-| custom           | Use your own debounce.c                                     | ```SRC += debounce.c``` add your own debounce.c and implement necessary functions |
-| sym_g / eager_pk | You are using the included matrix.c and debounce.c          | Use an alternative debounce algorithm |
+| DEBOUNCE_TYPE    | Description                                          | What else is needed           |
+| -------------    | ---------------------------------------------------  | ----------------------------- |
+| Not defined      | Use the default algorithm, currently sym_g           | Nothing                       |
+| custom           | Use your own debounce.c                              | ```SRC += debounce.c``` add your own debounce.c and implement necessary functions |
+| anything_else    | Use another algorithm from quantum/debounce/*        | Nothing                       |
 
-**Regarding split keyboards**: 
+**Regarding split keyboards**:
 The debounce code is compatible with split keyboards.
 
 # Use your own debouncing code
 * Set ```DEBOUNCE_TYPE = custom ```.
 * Add ```SRC += debounce.c```
-* Add your own ```debounce.c```. Look at included ```debounce_sym_g.c```s for sample implementations.
+* Add your own ```debounce.c```. Look at current implementations in ```quantum/debounce``` for examples.
 * Debouncing occurs after every raw matrix scan.
 * Use num_rows rather than MATRIX_ROWS, so that split keyboards are supported correctly.
 
 # Changing between included debouncing methods
 You can either use your own code, by including your own debounce.c, or switch to another included one.
 Included debounce methods are:
-* debounce_eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` millseconds of no further input for that key
-* debounce_sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed.
+* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` millseconds of no further input for that key
+* sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed.
 
 

docs/feature_macros.md

@@ -183,11 +183,11 @@ A macro can include the following commands:
 
 ### Mapping a Macro to a Key
 
-Use the `M()` function within your `KEYMAP()` to call a macro. For example, here is the keymap for a 2-key keyboard:
+Use the `M()` function within your keymap to call a macro. For example, here is the keymap for a 2-key keyboard:
 
 ```c
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = KEYMAP(
+    [0] = LAYOUT(
         M(0), M(1)
     ),
 };
@@ -216,7 +216,7 @@ If you have a bunch of macros you want to refer to from your keymap while keepin
 #define M_BYE M(1)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = KEYMAP(
+    [0] = LAYOUT(
         M_HI, M_BYE
     ),
 };

docs/feature_rgb_matrix.md

@@ -67,7 +67,7 @@ Configure the hardware via your `config.h`:
 	#define DRIVER_ADDR_1 0b1010000
 	#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
 
-	#define DRIVER_COUNT 1
+	#define DRIVER_COUNT 2
 	#define DRIVER_1_LED_TOTAL 64
 	#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
 
@@ -102,8 +102,8 @@ From this point forward the configuration is the same for all the drivers.
 
 The format for the matrix position used in this array is `{row | (col << 4)}`. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64. The easiest way to calculate these positions is:
 
-    x = 224 / ( NUMBER_OF_ROWS - 1 ) * ROW_POSITION
-    y = 64 / (NUMBER_OF_COLS - 1 ) * COL_POSITION
+    x = 224 / ( NUMBER_OF_COLS - 1 ) * ROW_POSITION
+    y = 64 / (NUMBER_OF_ROWS - 1 ) * COL_POSITION
 
 Where all variables are decimels/floats.
 

docs/feature_unicode.md

@@ -65,6 +65,8 @@ The following input modes are available:
   To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar.
   By default, this mode uses the left Option key (`KC_LALT`), but this can be changed by defining [`UNICODE_OSX_KEY`](#input-key-configuration) with another keycode.
 
+  **Note:** Using the _Unicode Hex Input_ input source may disable some Option based shortcuts, such as: Option + Left Arrow (`moveWordLeftAndModifySelection`) and Option + Right Arrow  (`moveWordRightAndModifySelection`).
+
 * **`UC_LNX`**: Linux built-in IBus Unicode input. Supports code points up to `0x10FFFF` (all possible code points).
 
   Enabled by default and works almost anywhere on IBus-enabled distros. Without IBus, this mode works under GTK apps, but rarely anywhere else.
@@ -121,7 +123,7 @@ For instance, you can add these definitions to your `config.h` file:
 
 ### Additional Customization
 
-Because Unicode is such a large and variable feature, there are a number of options that you can customize to work better on your system. 
+Because Unicode is such a large and variable feature, there are a number of options that you can customize to work better on your system.
 
 #### Start and Finish input functions
 
@@ -183,7 +185,7 @@ AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
 
 ### US International
 
-If you enable the US International layout on the system, it will use punctuation to accent the characters. 
+If you enable the US International layout on the system, it will use punctuation to accent the characters.
 
 For instance, typing "`a" will result in à.
 

docs/feature_velocikey.md

@@ -0,0 +1,30 @@
+# Velocikey
+
+Velocikey is a feature that lets you control the speed of lighting effects (like the Rainbow Swirl effect) with the speed of your typing. The faster you type, the faster the lights will go!
+
+## Usage
+For Velocikey to take effect, there are two steps. First, when compiling your keyboard, you'll need to set `VELOCIKEY_ENABLE=yes` in `rules.mk`, e.g.:
+
+```
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+STENO_ENABLE = no
+EXTRAKEY_ENABLE = yes
+VELOCIKEY_ENABLE = yes
+```
+
+Then, while using your keyboard, you need to also turn it on with the VLK_TOG keycode, which toggles the feature on and off.
+
+The following light effects will all be controlled by Velocikey when it is enabled:
+ - RGB Breathing
+ - RGB Rainbow Mood
+ - RGB Rainbow Swirl
+ - RGB Snake
+ - RGB Knight
+
+Support for LED breathing effects is planned but not available yet.
+
+ As long as Velocikey is enabled, it will control the speed regardless of any other speed setting that your RGB lights are currently on.
+
+ ## Configuration
+ Velocikey doesn't currently support any configuration via keyboard settings. If you want to adjust something like the speed increase or decay rate, you would need to edit `velocikey.c` and adjust the values there to achieve the kinds of speeds that you like.

docs/features.md

@@ -17,6 +17,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state.
 * [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout.
 * [Leader Key](feature_leader_key.md) - Tap the leader key followed by a sequence to trigger custom behavior.
+* [LED Matrix](feature_led_matrix.md) - LED Matrix single color lights for per key lighting (Single Color, not RGB).
 * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key.
 * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard.
 * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it.

docs/getting_started_make_guide.md

@@ -143,9 +143,9 @@ As there is no standard split communication driver for ARM-based split keyboards
 
 Lets you replace the default matrix scanning routine with your own code. You will need to provide your own implementations of matrix_init() and matrix_scan().
 
-`CUSTOM_DEBOUNCE`
+`DEBOUNCE_TYPE`
 
-Lets you replace the default key debouncing routine with your own code. You will need to provide your own implementation of debounce().
+Lets you replace the default key debouncing routine with an alternative one. If `custom` you will need to provide your own implementation.
 
 ## Customizing Makefile Options on a Per-Keymap Basis
 

docs/hand_wire.md

@@ -185,11 +185,18 @@ When you're done with the columns, start with the rows in the same process, from
 
 As you move along, be sure that the Teensy is staying in place - recutting and soldering the wires is a pain!
 
+## Additional guides
+
+If you're more of a visual learner, or want some additional tips and something more to follow along, these two visual step by step guides may be helpful:
+
+- [BrownFox's step by step guide](https://deskthority.net/viewtopic.php?f=7&t=6050)
+- [Cribbit's modern hand wiring guide](https://geekhack.org/index.php?topic=87689.0)
+
 # Getting Some Basic Firmware Set Up
 
 From here, you should have a working keyboard once you program a firmware. Before we attach the Teensy permanently to the keyboard, let's quickly get some firmware loaded onto the Teensy so we can test each keyswitch.
 
-To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/).
+To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/) (paid) or [Visual Studio Code](https://code.visualstudio.com) (free).
 
 The first thing we're going to do is create a new project using the script in the root directory of the firmware. In your terminal, run this command with `<project_name>` replaced by the name of your project - it'll need to be different from any other project in the `keyboards/` folder:
 
@@ -209,7 +216,7 @@ Farther down are `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`. Change their definitio
 
 ### `<project_name>.h`
 
-The next file you'll want to look at is `<project_name>.h`. You're going to want to rewrite the `KEYMAP` definition - the format and syntax here is extremely important, so pay attention to how things are setup. The first half of the definition are considered the arguments - this is the format that you'll be following in your keymap later on, so you'll want to have as many k*xy* variables here as you do keys. The second half is the part that the firmware actually looks at, and will contain gaps depending on how you wired your matrix.
+The next file you'll want to look at is `<project_name>.h`. You're going to want to rewrite the `LAYOUT` definition - the format and syntax here is extremely important, so pay attention to how things are setup. The first half of the definition are considered the arguments - this is the format that you'll be following in your keymap later on, so you'll want to have as many k*xy* variables here as you do keys. The second half is the part that the firmware actually looks at, and will contain gaps depending on how you wired your matrix.
 
 We'll dive into how this will work with the following example. Say we have a keyboard like this:
 
@@ -231,10 +238,10 @@ This can be described by saying the top row is 3 1u keys, and the bottom row is
     └─────┴─────┘
 ```
 
-The middle column is unused on the bottom row in this example. Our `KEYMAP` definition would look like this:
+The middle column is unused on the bottom row in this example. Our `LAYOUT` definition would look like this:
 
 ```
-    #define KEYMAP( \
+    #define LAYOUT( \
         k00, k01, k02, \
           k10,  k11,   \
     ) \
@@ -256,10 +263,10 @@ Let's say that instead, we wired our keyboard like this (a fair thing to do):
     └─────┴─────┘
 ```
 
-This would require our `KEYMAP` definition to look like this:
+This would require our `LAYOUT` definition to look like this:
 
 ```
-    #define KEYMAP( \
+    #define LAYOUT( \
         k00, k01, k02, \
           k10,  k11,   \
     ) \
@@ -269,7 +276,7 @@ This would require our `KEYMAP` definition to look like this:
     }
 ```
 
-Notice how the `k11` and `KC_NO` switched places to represent the wiring, and the unused final column on the bottom row. Sometimes it'll make more sense to put a keyswitch on a particular column, but in the end, it won't matter, as long as all of them are accounted for. You can use this process to write out the `KEYMAP` for your entire keyboard - be sure to remember that your keyboard is actually backwards when looking at the underside of it.
+Notice how the `k11` and `KC_NO` switched places to represent the wiring, and the unused final column on the bottom row. Sometimes it'll make more sense to put a keyswitch on a particular column, but in the end, it won't matter, as long as all of them are accounted for. You can use this process to write out the `LAYOUT` for your entire keyboard - be sure to remember that your keyboard is actually backwards when looking at the underside of it.
 
 ### `keymaps/<variant>/default.c`
 
@@ -291,7 +298,7 @@ This can be accomplished by using the following `keymaps` definition:
 
 ```
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = KEYMAP( /* Base */
+    [0] = LAYOUT( /* Base */
       KC_A,  KC_1,  KC_H, \
         KC_TAB,  KC_SPC   \
     ),
@@ -300,7 +307,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 Note that the layout of the keycodes is similar to the physical layout of our keyboard - this make it much easier to see what's going on. A lot of the keycodes should be fairly obvious, but for a full list of them, check out [Keycodes](keycodes.md) - there are also a lot of aliases to condense your keymap file.
 
-It's also important to use the `KEYMAP` function we defined earlier - this is what allows the firmware to associate our intended readable keymap with the actual wiring.
+It's also important to use the `LAYOUT` function we defined earlier - this is what allows the firmware to associate our intended readable keymap with the actual wiring.
 
 ## Compiling Your Firmware
 

docs/keymap.md

@@ -1,6 +1,6 @@
 # Keymap Overview
 
-QMK keymaps are defined inside a C source file. The data structure is an array of arrays. The outer array is a list of layer arrays while the inner layer array is a list of keys. Most keyboards define a `KEYMAP()` macro to help you create this array of arrays.
+QMK keymaps are defined inside a C source file. The data structure is an array of arrays. The outer array is a list of layer arrays while the inner layer array is a list of keys. Most keyboards define a `LAYOUT()` macro to help you create this array of arrays.
 
 
 ## Keymap and Layers
@@ -119,7 +119,7 @@ The main part of this file is the `keymaps[]` definition. This is where you list
 
     const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-After this you'll find a list of KEYMAP() macros. A KEYMAP() is simply a list of keys to define a single layer. Typically you'll have one or more "base layers" (such as QWERTY, Dvorak, or Colemak) and then you'll layer on top of that one or more "function" layers. Due to the way layers are processed you can't overlay a "lower" layer on top of a "higher" layer.
+After this you'll find a list of LAYOUT() macros. A LAYOUT() is simply a list of keys to define a single layer. Typically you'll have one or more "base layers" (such as QWERTY, Dvorak, or Colemak) and then you'll layer on top of that one or more "function" layers. Due to the way layers are processed you can't overlay a "lower" layer on top of a "higher" layer.
 
 `keymaps[][MATRIX_ROWS][MATRIX_COLS]` in QMK holds the 16 bit action code (sometimes referred as the quantum keycode) in it.  For the keycode representing typical keys, its high byte is 0 and its low byte is the USB HID usage ID for keyboard.
 
@@ -131,7 +131,7 @@ Here is an example of the Clueboard's base layer:
 
       /* Keymap _BL: Base Layer (Default Layer)
        */
-    [_BL] = KEYMAP(
+    [_BL] = LAYOUT(
       F(0),    KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_GRV,  KC_BSPC,          KC_PGUP, \
       KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,                   KC_PGDN, \
       KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN,  KC_QUOT,  KC_NUHS,  KC_ENT,                             \
@@ -149,7 +149,7 @@ Some interesting things to note about this:
 
 Our function layer is, from a code point of view, no different from the base layer. Conceptually, however, you will build that layer as an overlay, not a replacement. For many people this distinction does not matter, but as you build more complicated layering setups it matters more and more.
 
-    [_FL] = KEYMAP(
+    [_FL] = LAYOUT(
       KC_GRV,  KC_F1,   KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,   KC_F11,   KC_F12,   _______, KC_DEL,           BL_STEP, \
       _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS,  _______,  _______,  _______,                   _______, \
       _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______,  _______,  _______,  _______,                           \

docs/newbs_flashing.md

@@ -86,7 +86,7 @@ If you know what bootloader that you're using, then when compiling the firmware,
 
 ### DFU
 
-For the DFU bootloader, when you're ready to compile and flash your firmware, open up your terminal window and run the built command: 
+For the DFU bootloader, when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
     make <my_keyboard>:<my_keymap>:dfu
 
@@ -133,7 +133,7 @@ If you have any issues with this, you may need to this:
 
 ### Caterina 
 
-For Arduino boards and their close (such as the SparkFun ProMicro), when you're ready to compile and flash your firmware, open up your terminal window and run the built command: 
+For Arduino boards and their clones (such as the SparkFun ProMicro), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
     make <my_keyboard>:<my_keymap>:avrdude
 
@@ -201,7 +201,7 @@ If you have any issues with this, you may need to this:
 
 ## HalfKay
 
-For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the built command: 
+For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
     make <my_keyboard>:<my_keymap>:teensy
 

docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md

@@ -54,10 +54,10 @@ This is where all of the custom logic for your keyboard goes - you may not need
 
 ## `/keyboards/<keyboard>/<keyboard>.h`
 
-Here is where you can (optionally) define your `KEYMAP` function to remap your matrix into a more readable format. With ortholinear boards, this isn't always necessary, but it can help to accommodate the dead spots on your matrix, where there are keys that take up more than one space (2u, staggering, 6.25u, etc). The example shows the difference between the physical keys, and the matrix design:
+Here is where you can (optionally) define your `LAYOUT` function to remap your matrix into a more readable format. With ortholinear boards, this isn't always necessary, but it can help to accommodate the dead spots on your matrix, where there are keys that take up more than one space (2u, staggering, 6.25u, etc). The example shows the difference between the physical keys, and the matrix design:
 
 ```
-#define KEYMAP( \
+#define LAYOUT( \
     k00, k01, k02, \
       k10,  k11   \
 ) \

docs/understanding_qmk.md

@@ -57,10 +57,10 @@ Matrix Scanning runs many times per second. The exact rate varies but typically
 
 Once we know the state of every switch on our keyboard we have to map that to a keycode. In QMK this is done by making use of C macros to allow us to separate the definition of the physical layout from the definition of keycodes.
 
-At the keyboard level we define a C macro (typically named `KEYMAP()`) which maps our keyboard's matrix to physical keys. Sometimes the matrix does not have a switch in every location, and we can use this macro to pre-populate those with KC_NO, making the keymap definition easier to work with. Here's an example `KEYMAP()` macro for a numpad:
+At the keyboard level we define a C macro (typically named `LAYOUT()`) which maps our keyboard's matrix to physical keys. Sometimes the matrix does not have a switch in every location, and we can use this macro to pre-populate those with KC_NO, making the keymap definition easier to work with. Here's an example `LAYOUT()` macro for a numpad:
 
 ```c
-#define KEYMAP( \
+#define LAYOUT( \
     k00, k01, k02, k03, \
     k10, k11, k12, k13, \
     k20, k21, k22, \
@@ -75,17 +75,17 @@ At the keyboard level we define a C macro (typically named `KEYMAP()`) which map
 }
 ```
 
-Notice how the second block of our `KEYMAP()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
+Notice how the second block of our `LAYOUT()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
 
 You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
 
 ##### Keycode Assignment
 
-At the keymap level we make use of our `KEYMAP()` macro above to map keycodes to physical locations to matrix locations. It looks like this:
+At the keymap level we make use of our `LAYOUT()` macro above to map keycodes to physical locations to matrix locations. It looks like this:
 
 ```
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP(
+[0] = LAYOUT(
   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
   KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
   KC_P4,   KC_P5,   KC_P6, \
@@ -94,7 +94,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 }
 ```
 
-Notice how all of these arguments match up with the first half of the `KEYMAP()` macro from the last section? This is how we take a keycode and map it to our Matrix Scan from earlier.
+Notice how all of these arguments match up with the first half of the `LAYOUT()` macro from the last section? This is how we take a keycode and map it to our Matrix Scan from earlier.
 
 ##### State Change Detection
 

keyboards/1upkeyboards/1up60hse/1up60hse.h

@@ -13,8 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef KB_H
-#define KB_H
+#pragma once
 
 #include "quantum.h"
 
@@ -36,4 +35,3 @@
 	{ K30,  K31,  K32,  K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, KC_NO, KC_NO, K3D }, \
 	{ K40,  K41,  K42,  KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B,   KC_NO, K4D }  \
 }
-#endif

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -68,5 +68,6 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+EXTRAFLAGS += -flto
 
 LAYOUTS = 60_ansi

keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c

@@ -46,35 +46,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 }
 
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
 		writePinLow(B6);
 	} else {
 		writePinHigh(B6);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -54,5 +54,6 @@ NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https:/
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
+EXTRAFLAGS += -flto
 
 LAYOUTS = 60_hhkb

keyboards/1upkeyboards/1up60rgb/1up60rgb.h

@@ -1,5 +1,4 @@
-#ifndef KB_H
-#define KB_H
+#pragma once
 
 #include "quantum.h"
 
@@ -77,5 +76,3 @@
 	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
 	KC_NO,K401,       K403,             K406,                   KC_NO,K411,       K413, KC_NO \
 )
-
-#endif

keyboards/1upkeyboards/1up60rgb/config.h

@@ -1,5 +1,4 @@
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -46,5 +45,3 @@
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #endif
-
-#endif

keyboards/1upkeyboards/1up60rgb/readme.md

@@ -1,4 +1,4 @@
-# 1upkeyboards 60% RGB
+# 1up60rgb 60% RGB
 
 Firmware for custom keyboard PCB with 60% key layout.
 

keyboards/1upkeyboards/1up60rgb/rules.mk

@@ -44,15 +44,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no	# Console for debug(+400)
-COMMAND_ENABLE ?= no    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
 
 LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift 60_hhkb

keyboards/1upkeyboards/readme.md

@@ -1,5 +1,7 @@
 # 1UP Keyboards
 
+1UP Keyboards is an online mechanical keyboard retailer located in New York, USA.
+
 Website: [1UP Keyboards](https://www.1upkeyboards.com/)  
 Discord: [Server Invite](https://discordapp.com/invite/c6SYn8)  
 YouTube: [skiwithpete](https://www.youtube.com/user/skiwithpete)  

keyboards/1upkeyboards/super16/keymaps/default/config.h

@@ -1,4 +1,4 @@
-/* Copyright 2019 'mechmerlin'
+/* Copyright 2019 MechMerlin
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/1upkeyboards/super16/rules.mk

@@ -80,4 +80,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-LAYOUTS = ortho_4x4
+LAYOUTS = ortho_4x4

keyboards/1upkeyboards/sweet16/config.h

@@ -1,5 +1,4 @@
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -47,4 +46,3 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-#endif

keyboards/1upkeyboards/sweet16/readme.md

@@ -1,5 +1,4 @@
-Sweet16
-===
+# Sweet 16 Macropad
 
 A 4x4 numpad/macro pad sold by 1up Keyboards - designed by Bishop Keyboards
 

keyboards/1upkeyboards/sweet16/rules.mk

@@ -53,4 +53,5 @@ SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes      # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+EXTRAFLAGS += -flto

keyboards/1upkeyboards/sweet16/sweet16.h

@@ -1,5 +1,4 @@
-#ifndef KB_H
-#define KB_H
+#pragma once
 
 #include "quantum.h"
 
@@ -29,4 +28,3 @@
     { KC_NO, K31,   K32,   KC_NO }  \
 }
 
-#endif

keyboards/40percentclub/foobar/info.json

@@ -2,10 +2,12 @@
     "keyboard_name": "foobar",
     "url": "",
     "maintainer": "qmk",
-    "width": 6,
-    "height": 2,
+    "width": 10,
+    "height": 3,
     "layouts": {
         "LAYOUT_macro": {
+            "width": 5,
+            "height": 3,
             "key_count": 15,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},

keyboards/40percentclub/half_n_half/half_n_half.h

@@ -16,6 +16,7 @@
 #pragma once
 
 #include "quantum.h"
+#define ___ KC_NO
 
 /* This a shortcut to help you visually see your layout.
  *
@@ -26,18 +27,18 @@
  * represents the switch matrix.
  */
 #define LAYOUT( \
-    K00, K01, K02, K03, K04, K05, K06,     K50, K51, K52, K53, K54, K55, K56, \
-    K10, K11, K12, K13, K14, K15, K16,     K60, K61, K62, K63, K64, K65, K66, \
-    K20, K21, K22, K23, K24, K25, K26,     K70, K71, K72, K73, K74, K75, K76, \
-                        K34,                         K82 \
+    L00, L01, L02, L03, L04, L05, L06,     R00, R01, R02, R03, R04, R05, R06, \
+    L10, L11, L12, L13, L14, L15, L16,     R10, R11, R12, R13, R14, R15, R16, \
+    L20, L21, L22, L23, L24, L25, L26,     R20, R21, R22, R23, R24, R25, R26, \
+                        L34,                         R32 \
 ) { \
-    { K00,   K01,   K02,   K03,   K04, K05,   K06   }, \
-    { K10,   K11,   K12,   K13,   K14, K15,   K16   }, \
-    { K20,   K21,   K22,   K23,   K24, K25,   K26   }, \
-    { KC_NO, KC_NO, KC_NO, KC_NO, K34, KC_NO, KC_NO }, \
+    { L00, L01, L02, L03, L04, L05, L06 }, \
+    { L10, L11, L12, L13, L14, L15, L16 }, \
+    { L20, L21, L22, L23, L24, L25, L26 }, \
+    { ___, ___, ___, ___, L34, ___, ___ }, \
 \
-    { K56,   K55,   K54,   K53,   K52, K51,   K50   }, \
-    { K66,   K65,   K64,   K63,   K62, K61,   K60   }, \
-    { K76,   K75,   K74,   K73,   K72, K71,   K70   }, \
-    { KC_NO, KC_NO, KC_NO, KC_NO, K82, KC_NO, KC_NO }  \
+    { R06, R05, R04, R03, R02, R01, R00 }, \
+    { R16, R15, R14, R13, R12, R11, R10 }, \
+    { R26, R25, R24, R23, R22, R21, R20 }, \
+    { ___, ___, ___, ___, R32, ___, ___ }  \
 }

keyboards/40percentclub/half_n_half/info.json

@@ -0,0 +1,62 @@
+{
+  "keyboard_name": "half_n_half",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 14,
+  "height": 4,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 44,
+      "layout": [
+          {"label":"L00", "x":0, "y":0},
+          {"label":"L01", "x":1, "y":0},
+          {"label":"L02", "x":2, "y":0},
+          {"label":"L03", "x":3, "y":0},
+          {"label":"L04", "x":4, "y":0},
+          {"label":"L05", "x":5, "y":0},
+          {"label":"L06", "x":6, "y":0},
+          {"label":"R00", "x":7, "y":0},
+          {"label":"R01", "x":8, "y":0},
+          {"label":"R02", "x":9, "y":0},
+          {"label":"R03", "x":10, "y":0},
+          {"label":"R04", "x":11, "y":0},
+          {"label":"R05", "x":12, "y":0},
+          {"label":"R06", "x":13, "y":0},
+
+          {"label":"L10", "x":0, "y":1},
+          {"label":"L11", "x":1, "y":1},
+          {"label":"L12", "x":2, "y":1},
+          {"label":"L13", "x":3, "y":1},
+          {"label":"L14", "x":4, "y":1},
+          {"label":"L15", "x":5, "y":1},
+          {"label":"L16", "x":6, "y":1},
+          {"label":"R10", "x":7, "y":1},
+          {"label":"R11", "x":8, "y":1},
+          {"label":"R12", "x":9, "y":1},
+          {"label":"R13", "x":10, "y":1},
+          {"label":"R14", "x":11, "y":1},
+          {"label":"R15", "x":12, "y":1},
+          {"label":"R16", "x":13, "y":1},
+
+          {"label":"L20", "x":0, "y":2},
+          {"label":"L21", "x":1, "y":2},
+          {"label":"L22", "x":2, "y":2},
+          {"label":"L23", "x":3, "y":2},
+          {"label":"L24", "x":4, "y":2},
+          {"label":"L25", "x":5, "y":2},
+          {"label":"L26", "x":6, "y":2},
+          {"label":"R20", "x":7, "y":2},
+          {"label":"R21", "x":8, "y":2},
+          {"label":"R22", "x":9, "y":2},
+          {"label":"R23", "x":10, "y":2},
+          {"label":"R24", "x":11, "y":2},
+          {"label":"R25", "x":12, "y":2},
+          {"label":"R26", "x":13, "y":2},
+ 
+          {"label":"L34", "x":4, "y":3, "w":2},
+          {"label":"R32", "x":8, "y":3, "w":2}
+      ]
+    }
+  }
+}
+  

keyboards/40percentclub/mf68/config.h

@@ -52,6 +52,28 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 

keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* Overrides for Feather 32u4 Bluefruit */
+
+/* USB Device descriptor parameter */
+#undef DESCRIPTION
+#define DESCRIPTION     Magicforce 68 BLE
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+#undef UNUSED_PINS
+#define MATRIX_ROW_PINS { D1, D0, C6, D7, B5, B6, B7, D6 }
+#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D2, D3 }
+#define UNUSED_PINS {B5}

keyboards/40percentclub/mf68/keymaps/mf68_ble/readme.md

@@ -1,6 +1,6 @@
 # mf68_ble
 
-![mf68_ble](https://3.bp.blogspot.com/-0YCA3Hx2Rq0/WD3U3GWhyvI/AAAAAAAB_Uo/RWTeyCPblGcxDrDwT9WL9ck2ZRuR26DgACLcB/s640/IMG_20161129_063741.jpg)
+![mf68_ble](https://i.imgur.com/zuTyy7k.jpg)
 ===
 
 Magicforce 68 with [replacement PCB](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/mf68) designed by [di0ib](https://github.com/di0ib).
@@ -24,6 +24,6 @@ Below is how you wire the Feather to PCB
 
 Make example for this keyboard (after setting up your build environment):  
 
-    make 40percentclub/mf68_ble:default
+    make 40percentclub/mf68:mf68_ble
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/mf68/keymaps/mf68_ble/rules.mk

@@ -0,0 +1,66 @@
+# Overrides for Feather 32u4 Bluefruit
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 8000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BLUETOOTH = AdafruitBLE
+BACKLIGHT_ENABLE = no

keyboards/40percentclub/mf68/rules.mk

@@ -63,13 +63,14 @@ BOOTLOADER = caterina
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI controls
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/40percentclub/mf68_ble/info.json

@@ -1,12 +0,0 @@
-{
-  "keyboard_name": "MF68 BLE",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 17.25,
-  "height": 5,
-  "layouts": {
-      "LAYOUT_68_ansi": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]
-      }
-  }
-}

keyboards/40percentclub/mf68_ble/mf68_ble.c

@@ -1,8 +0,0 @@
-#include "mf68_ble.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}

keyboards/40percentclub/mf68_ble/mf68_ble.h

@@ -1,37 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT_68_ansi( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14,     K15, K16, \
-    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32,     K33, K34, \
-    K35,  K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47,     K48, \
-    K50,   K51, K52, K53, K54, K55, K56, K57, K58, K60, K61,    K62,          K63, \
-    K64,  K65,  K66,                 K67,              K68,  K70,  K71,  K72, K73, K74 \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \
-    { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \
-    { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \
-    { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
-    { K60, K61, K62, K63, K64, K65, K66, K67, K68 }, \
-    { K70, K71, K72, K73, K74 } \
-}
-
-#define LAYOUT_kc( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14,     K15, K16, \
-    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32,     K33, K34, \
-    K35,  K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47,     K48, \
-    K50,   K51, K52, K53, K54, K55, K56, K57, K58, K60, K61,    K62,          K63, \
-    K64,  K65,  K66,                 K67,              K68,  K70,  K71,  K72, K73, K74 \
-) LAYOUT_68_ansi( \
-    KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, \
-    KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, \
-    KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, \
-    KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, \
-    KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, \
-    KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, \
-    KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, \
-    KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74 \
-)

keyboards/alf/x11/config.h

@@ -0,0 +1,245 @@
+/*
+Copyright 2019 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Alf
+#define PRODUCT         x11
+#define DESCRIPTION     A TKL custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 7
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D6, D7, F0, F1, F4, F5, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN F7
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 28
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/alf/x11/info.json

@@ -0,0 +1,103 @@
+{
+    "keyboard_name": "QMK80",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 18.25,
+    "height": 6.5,
+    "layouts": {
+      "LAYOUT": {
+        "key_count": 88,
+        "layout": [
+          {"label":"K00", "x":0, "y":0},
+          {"label":"K01", "x":2, "y":0},
+          {"label":"K02", "x":3, "y":0},
+          {"label":"K03", "x":4, "y":0},
+          {"label":"K04", "x":5, "y":0},
+          {"label":"K05", "x":6.5, "y":0},
+          {"label":"K06", "x":7.5, "y":0},
+          {"label":"K07", "x":8.5, "y":0},
+          {"label":"K08", "x":9.5, "y":0},
+          {"label":"K09", "x":11, "y":0},
+          {"label":"K0A", "x":12, "y":0},
+          {"label":"K0B", "x":13, "y":0},
+          {"label":"K0C", "x":14, "y":0},
+          {"label":"K60", "x":15.25, "y":0},
+          {"label":"K61", "x":16.25, "y":0},
+          {"label":"K62", "x":17.25, "y":0},
+          {"label":"K10", "x":0, "y":1.5},
+          {"label":"K11", "x":1, "y":1.5},
+          {"label":"K12", "x":2, "y":1.5},
+          {"label":"K13", "x":3, "y":1.5},
+          {"label":"K14", "x":4, "y":1.5},
+          {"label":"K15", "x":5, "y":1.5},
+          {"label":"K16", "x":6, "y":1.5},
+          {"label":"K17", "x":7, "y":1.5},
+          {"label":"K18", "x":8, "y":1.5},
+          {"label":"K19", "x":9, "y":1.5},
+          {"label":"K1A", "x":10, "y":1.5},
+          {"label":"K1B", "x":11, "y":1.5},
+          {"label":"K1C", "x":12, "y":1.5},
+          {"label":"K5A", "x":13, "y":1.5, "w":2},
+          {"label":"K63", "x":15.25, "y":1.5},
+          {"label":"K65", "x":16.25, "y":1.5},
+          {"label":"K67", "x":17.25, "y":1.5},
+          {"label":"K20", "x":0, "y":2.5, "w":1.5},
+          {"label":"K21", "x":1.5, "y":2.5},
+          {"label":"K22", "x":2.5, "y":2.5},
+          {"label":"K23", "x":3.5, "y":2.5},
+          {"label":"K24", "x":4.5, "y":2.5},
+          {"label":"K25", "x":5.5, "y":2.5},
+          {"label":"K26", "x":6.5, "y":2.5},
+          {"label":"K27", "x":7.5, "y":2.5},
+          {"label":"K28", "x":8.5, "y":2.5},
+          {"label":"K29", "x":9.5, "y":2.5},
+          {"label":"K2A", "x":10.5, "y":2.5},
+          {"label":"K2B", "x":11.5, "y":2.5},
+          {"label":"K2C", "x":12.5, "y":2.5},
+          {"label":"K4C", "x":13.5, "y":2.5, "w":1.5},
+          {"label":"K64", "x":15.25, "y":2.5},
+          {"label":"K66", "x":16.25, "y":2.5},
+          {"label":"K68", "x":17.25, "y":2.5},
+          {"label":"K30", "x":0, "y":3.5, "w":1.75},
+          {"label":"K31", "x":1.75, "y":3.5},
+          {"label":"K32", "x":2.75, "y":3.5},
+          {"label":"K33", "x":3.75, "y":3.5},
+          {"label":"K34", "x":4.75, "y":3.5},
+          {"label":"K35", "x":5.75, "y":3.5},
+          {"label":"K36", "x":6.75, "y":3.5},
+          {"label":"K37", "x":7.75, "y":3.5},
+          {"label":"K38", "x":8.75, "y":3.5},
+          {"label":"K39", "x":9.75, "y":3.5},
+          {"label":"K3A", "x":10.75, "y":3.5},
+          {"label":"K3B", "x":11.75, "y":3.5},
+          {"label":"K3C", "x":12.75, "y":3.5, "w":2.25},
+          {"label":"K40", "x":0, "y":4.5, "w":2.25},
+          {"label":"K41", "x":2.25, "y":4.5},
+          {"label":"K42", "x":3.25, "y":4.5},
+          {"label":"K43", "x":4.25, "y":4.5},
+          {"label":"K44", "x":5.25, "y":4.5},
+          {"label":"K45", "x":6.25, "y":4.5},
+          {"label":"K46", "x":7.25, "y":4.5},
+          {"label":"K47", "x":8.25, "y":4.5},
+          {"label":"K48", "x":9.25, "y":4.5},
+          {"label":"K49", "x":10.25, "y":4.5},
+          {"label":"K4A", "x":11.25, "y":4.5},
+          {"label":"K4B", "x":12.25, "y":4.5, "w":1.75},
+          {"label":"K69", "x":14, "y":4.5},
+          {"label":"K58", "x":16.25, "y":4.5},
+          {"label":"K50", "x":0, "y":5.5, "w":1.25},
+          {"label":"K51", "x":1.25, "y":5.5, "w":1.25},
+          {"label":"K52", "x":2.5, "y":5.5, "w":1.25},
+          {"label":"K53", "x":3.75, "y":5.5, "w":6.25},
+          {"label":"K54", "x":10, "y":5.5, "w":1.25},
+          {"label":"K55", "x":11.25, "y":5.5, "w":1.25},
+          {"label":"K56", "x":12.5, "y":5.5, "w":1.25},
+          {"label":"K57", "x":13.75, "y":5.5, "w":1.25},
+          {"label":"K6A", "x":15.25, "y":5.5},
+          {"label":"K59", "x":16.25, "y":5.5},
+          {"label":"K6B", "x":17.25, "y":5.5}
+        ]
+      }
+    }
+  }
+  

keyboards/alf/x11/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/alf/x11/keymaps/default/keymap.c

@@ -0,0 +1,78 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( \
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
+    KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    \
+    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    \
+    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN, KC_CAPS, KC_A,    \
+    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_LSFT, KC_Z,    \
+    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),   KC_UP,   KC_LCTL, \
+    KC_LGUI, KC_LALT, KC_SPC,  KC_RALT, MO(1),   KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  \
+  ),
+  [1] = LAYOUT( \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+    KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_MPLY, KC_MSTP, RGB_TOG, RGB_MOD, \
+    RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, KC_TRNS, \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_VAD, RGB_SAD  \
+  ),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/alf/x11/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for x11

keyboards/alf/x11/readme.md

@@ -0,0 +1,13 @@
+# Alf X1.1
+
+TKL Keyboard made by Alf
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Alf X1.1 PCB  
+Hardware Availability: [Massdrop](https://www.massdrop.com/buy/alf-studio-x1-1-custom-mechanical-keyboard-kit)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alf/x11:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/alf/x11/rules.mk

@@ -0,0 +1,82 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+EXTRAFLAGS += -flto

keyboards/alf/x11/x11.c

@@ -0,0 +1,63 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "x11.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	setPinOutput(C6);
+	setPinOutput(E6);
+	setPinOutput(C7);
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+		writePinLow(C6);
+	} else {
+		writePinHigh(C6);
+	}
+
+	if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+		writePinLow(E6);
+	} else {
+		writePinHigh(E6);
+	}
+
+	if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+		writePinLow(C7);
+	} else {
+		writePinHigh(C7);
+	}
+
+	led_set_user(usb_led);
+}

keyboards/alf/x11/x11.h

@@ -0,0 +1,43 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K60, K61, K62, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K5A, K63, K65, K67, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4C, K64, K66, K68, \
+  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+  K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K69, K58, \
+  K50, K51, K52, K53, K54, K55, K56, K57, K6A, K59, K6B  \
+) { \
+  {   K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C   }, \
+  {   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C   }, \
+  {   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C   }, \
+  {   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C   }, \
+  {   K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A,   K4B,   K4C   }, \
+  {   K50,   K51,   K52,   K53,   K54,   K55,   K56,   K57,   K58,   K59,   K5A,   KC_NO, KC_NO }, \
+  {   K60,   K61,   K62,   K63,   K64,   K65,   K66,   K67,   K68,   K69,   K6A,   K6B,   KC_NO }, \
+}

keyboards/atreus/keymaps/default/keymap.c

@@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
   [_LW] = LAYOUT( /* [> LOWER <] */
     KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP,                   KC_UP,   KC_F7,   KC_F8,   KC_F9,   KC_F10  ,
-    KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN,                   KC_DOWN, KC_F4,   KC_F5,   KC_F6,   KC_F11  ,
+    KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN,                   KC_DOWN, KC_F4,   KC_F5,   KC_F6,   KC_F11  ,
     KC_NO,   KC_VOLU, KC_NO,   KC_NO,   RESET,                     KC_NO,   KC_F1,   KC_F2,   KC_F3,   KC_F12  ,
     KC_NO,   KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC,  TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS )
 };

keyboards/atreus/keymaps/yttyx/README.md

@@ -1,77 +1,103 @@
 # Overview
 
-A Balance 12 layout for the Atreus keyboard.
+This layout is based on Balance Twelve (mirror variant) by Sasha Viminitz. Please see [this page](https://mathematicalmulticore.wordpress.com/the-keyboard-layout-project/) 
+for more information. It's designed for left-handers who use their right hand for the mouse.
 
-Balance 12 was created by Sasha Viminitz. Please see [this page](https://mathematicalmulticore.wordpress.com/the-keyboard-layout-project/)
-for some background on the design of the layout.
+## To build
 
-* The variant used here is a mirror of the original for left-handers
-* The central column of punctuation keys has been moved elsewhere
-* Home positions for the left and right forefingers are *T* and *A* respectively
+```
+sudo make atreus:yttyx
+```
 
-## To build/flash
+## To flash (example)
 
-> make atreus:yttyx:avrdude
+```
+sudo avrdude -p atmega32u4 -c avr109 -U flash:w:atreus_yttyx.hex -P /dev/ttyACM0
+```
 
 ## Layers
 
 ### Base:
 
-      .----------------------------------.         .------------------------------.
-      | P    | L    | C    | D   | W     |         | U    | O   | Y   | K   | Q   |
-      +------+------+------+-----+-------|         |------+-----+-----+-----+-----|
-      | N    | R    | S    | T   | M     |         | A    | E   | I   | H   | V   |
-      +------+------+------+-----+-------|         |------+-----+-----+-----+-----|
-      | Z    | J    | F    | G   | B     |         | ,    | .   | ;   | X   | -   |
-      +------+------+------+-----+-------+---------+------+-----+-----+-----+-----|
-      | Shft | Ctl  | Alt  | BS  | Space | L1 | R1 | Shft | R2  | Win | Ctl | Alt |
-      '---------------------------------------------------------------------------'
+    .--------.-------.-------.-------.--------.                           .-------.-------.-------.-------.------.
+    | P      | L     | C     | D     | W      |                           | U     | O     | Y     | K     | Q    |
+    |--------+-------+-------+-------+--------|                           |-------+-------+-------+-------+------|
+    | N      | R     | S     | T     | M      |                           | A     | E     | I     | H     | V    |
+    |--------+-------+-------+-------+--------|                           |-------+-------+-------+-------+------|
+    | Z Sft  | J Ctl | F Alt | G     | B      |                           | ,     | . Alt | ; Ctl | X Sft | Sup  |
+    '--------'-------'-------+-------+--------+-----.               .-----+-------+-------+-------'-------'------'
+                             | BS P1 | Spc P2 | P3  |               |     | Sft   |       |
+                             '-------'--------'-----'               '-----'-------'-------'
 
-### L1:
+### P1: Punctuation (1)
 
-      .---------------------------------.         .--------------------------------.
-      | 1    | 2    | 3    | 4  | 5     |         | 6    | 7  | 8   | 9    | 0     |
-      |------+------+------+----+-------|         |------+----+-----+------+-------|
-      | Tab  | ?    | =    | -  | _     |         | '    | "  | +   | *    | Enter |
-      |------+------+------+----+-------|         |------+----+-----+------+-------|
-      | Esc  | !    | &    |    |       |         | ,    | .  | ;   |      | -     |
-      |------+------+------+----+-------+---------+------+----+-----+------+-------|
-      | Shft | Ctrl | Alt  | Bk | Space | L1 | R1 | Shft | R2 | Sup | Ctrl | Alt   |
-      '----------------------------------------------------------------------------'
 
-### R1:
+    .--------.-------.-------.-------.-------.                              .------.-------.-------.-------.------.
+    | Esc    |       |       |       | RS    |                              | |    | /     | ^     | <20>     |  ~   |
+    |--------+-------+-------+-------+-------|                              |------+-------+-------+-------+------|
+    | Tab    |       |       |       |       |                              | &    | \     | `     | $     | Ent  |
+    |--------+-------+-------+-------+-------|                              |------+-------+-------+-------+------|
+    | Sft    | Ctl   | Alt   | Del   |       |                              | %    | Alt   | Ctl   | Sft   | Sup  |
+    '--------'-------'-------+-------+-------+-----.                  .-----+------+-------+-------'-------'------'
+                             | P1    |       |     |                  |     | Sft  |       |
+                             '-------'-------'-----'                  '-----'------'-------'
 
-      .---------------------------------.         .-------------------------------.
-      | <    | >    | {   | }   | @     |         | $    | <20>  |     |      | R3   |
-      +------+------+-----+-----|-------|         |------+----+-----+------+------|
-      | [    | ]    | (   | )   | #     |         | '    | "  | ~   | `    | Caps |
-      |------+------+-----+-----+-------|         |------+----+-----+------+------|
-      | /    | \    | ^   | |   | %     |         | ,    | .  | ;   |      | PScn |
-      |------+------+-----+-----+-------+---------+------+----+-----+------+------|
-      | Shft | Ctrl | Alt | Del | Space | L1 | R1 | Shft | R2 | Sup | Ctrl | Alt  |
-      '---------------------------------------------------------------------------'
+### P2: Punctuation (2)
 
-### R2:
+    .-------.-------.-------.-------.-------.                               .-------.-------.-------.-------.------.
+    | Esc   |       | NC    | FV    |       |                               | (     | )     | "     | ?     |      |
+    |-------+-------+-------+-------+-------|                               |-------+-------+-------+-------+------|
+    | Tab   | Ctl-X | Ctl-C | Ctl-V | Ctl-Z |                               | {     | }     | '     | !     | Ent  |
+    |-------+-------+-------+-------+-------|                               |-------+-------+-------+-------+------|
+    | Sft   | Ctl   | Alt   | Del   | Ent   |                               | #     | Alt   | Ctl   | Sft   | Sup  |
+    '-------'-------'-------+-------+-------+-----.                   .-----+-------+-------+-------'-------'------'
+                            | BS    | P2    |     |                   |     | Sft   |       |
+                            '-------'-------'-----'                   '-----'-------'-------'
 
-      .-----------------------------------.         .--------------------.-----------------.
-      | F12  | F11  | F10  | F9   | Copy  |         | Home | Up   | End  | PgUp | Insert   |
-      |------+------+------+------+-------|         |------+------+------+------+----------|
-      | F8   | F7   | F6   | F5   | Paste |         | Left | Down | Right| PgDn | Enter    |
-      |------+------+------+------+-------|         |------+------+------+------+----------|
-      | F4   | F3   | F2   | F1   | Cut   |         | ^Tab |      | Tab  |      |          |
-      |------+------+------+------+-------+---------+------+------+------+------+----------|
-      | Shft | Ctrl | Alt  | Del  | Undo  | L1 | R1 | Shft | R2   | Sup  | Ctrl | WinRight |
-      '------------------------------------------------------------------------------------'
+### P3: Punctuation (3)
 
-### R3:
+    .-------.-------.-------.-------.-------.                             .------.-------.-------.-------.------.
+    | Esc   |       | Break | Pscr  | ScLk  |                             | <    | >     | +     | _     | =    |
+    |-------+-------+-------+-------+-------|                             |------+-------+-------+-------+------|
+    | Tab   |       |       | Caps  |       |                             | [    | ]     | *     | -     | Ent  |
+    |-------+-------+-------+-------+-------|                             |------+-------+-------+-------+------|
+    | Sft   | Ctl   | Alt   | Del   |       |                             | @    | Alt   | Ctl   | Sft   | Sup  |
+    '-------'-------'-------+-------+-------+-----.                 .-----+------+-------+-------'-------'------'
+                            | BS    |       | P3  |                 |     | Sft  |       |
+                            '-------'-------'-----'                 '-----'------'-------'
 
-      .----------------------------.         .------------------------.
-      | RESET |    |     |    |    |         |    |    |    |    | R3 |
-      |-------+----+-----+----+----|         |----+----+----+----+----|
-      |       |    |     |    |    |         |    |    |    |    |    |
-      |-------+----+-----+----+----|         |----+----+----+----+----|
-      |       |    |     |    |    |         |    |    |    |    |    |
-      |-------+----+-----+----+----+---------+----+----+----+----+----|
-      |       |    |     |    |    |    |    |    |    |    |    |    |
-      '---------------------------------------------------------------'
+### Numerals / Cursor control
 
+    .-------.-------.-------.------.-------.                              .------.-------.-------.------.------.
+    | 1     | 2     | 3     | 4    | 5     |                              | Home | Up    | End   | PgUp |      |
+    |-------+-------+-------+------+-------|                              |------+-------+-------+------+------|
+    | 6     | 7     | 8     | 9    | 0     |                              | Left | Down  | Right | PgDn |      |
+    |-------+-------+-------+------+-------|                              |------+-------+-------+------+------|
+    | Sft   | Ctl   | Alt   | Del  | .     |                              | Ins  | Alt   | Ctl   | Sft  | Sup  |
+    '-------'-------'-------+------+-------+-----.                  .-----+------+-------+-------'------'------'
+                            | BS   | BA    |     |                  |     | Sft  |       |
+                            '------'-------'-----'                  '-----'------'-------'
+
+### FV: Function keys / Cursor control (Vim)
+
+    .-------.------.-------.-----.-------.                                .------.-------.-----.-------.------.
+    | F1    | F2   | F3    | F4  | F5    |                                | 0    | K     | $   | Ctl-B |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    | F6    | F7   | F8    | F9  | F10   |                                | H    | J     | L   | Ctl-F |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    | Sft   | Ctl  | Alt   | F11 | F12   |                                |      | Alt   | Ctl | Sft   | Sup  |
+    '-------'------'-------+-----+-------+-----.                    .-----+------+-------+-----'-------'------'
+                           | BS  | BA    |     |                    |     | Sft  |       |
+                           '-----'-------'-----'                    '-----'------'-------'
+
+### RS: Reset
+
+    .-------.------.-------.-----.-------.                                .------.-------.-----.-------.------.
+    | RESET |      |       |     |       |                                |      |       |     |       |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    |       |      |       |     |       |                                |      |       |     |       |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    |       |      |       |     |       |                                |      |       |     |       |      |
+    '-------'------'-------+-----+-------+-----.                    .-----+------+-------+-----'-------'------'
+                           |     | BA    |     |                    |     |      |       |
+                           '-----'-------'-----'                    '-----'------'-------'

keyboards/atreus/keymaps/yttyx/config.h

@@ -1,12 +1,4 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define ONESHOT_TIMEOUT       500   // Time (in ms) before the one shot key is released
-
-// Disable some options to reduce firmware size
-#define NO_PRINT
-#define NO_ACTION_TAPPING
+#pragma once
+#define NO_ACTION_ONESHOT
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-
-#endif

keyboards/atreus/keymaps/yttyx/keymap.c

@@ -2,115 +2,158 @@
 #include QMK_KEYBOARD_H
 
 enum layers {
-  BASE,         // Balance Twelve
-  L1,           // (momentary)
-  R1,           // (momentary)
-  R2,           // (momentary)
-  R3            // (momentary)
+  BA,           // Base (Balance Twelve mirror variant)
+  P1,           // Punctuation (1)
+  P2,           // Punctuation (2)
+  P3,           // Punctuation (2)
+  NC,           // Numerals / Cursor control
+  FV,           // Function keys / Cursor control (Vim)
+  RS            // Reset
 };
 
-// Aliases from replicaJunction's atreus layout
-#define KCX_LST   LSFT(KC_TAB)
-#define KX_COPY   LCTL(KC_C)
-#define KX_CUT    LCTL(KC_X)
-#define KX_PAST   LCTL(KC_V)
-#define KX_UNDO   LCTL(KC_Z)
+// Abbreviations - base
+#define KX_P1_BSPC      LT(P1, KC_BSPC)
+#define KX_P2_SPC       LT(P2, KC_SPC)
 
-#define KX_AT     LSFT(KC_QUOT)
-#define KX_PIPE   LSFT(KC_NUBS)
-#define KX_WINR   LSFT(LGUI(KC_RGHT))   // Move window to next monitor (Windows)
+#define KX_SFT_Z        MT(MOD_LSFT, KC_Z)
+#define KX_CTL_J        MT(MOD_LCTL, KC_J)
+#define KX_ALT_F        MT(MOD_LALT, KC_F)
 
+#define KX_ALT_DOT      MT(MOD_LALT, KC_DOT)
+#define KX_CTL_SCLN     MT(MOD_LCTL, KC_SCLN)
+#define KX_SFT_X        MT(MOD_LSFT, KC_X)
 
+#define KX_AT           LSFT(KC_QUOT)
+#define KX_DQUOT        LSFT(KC_2)
+#define KX_PIPE         LSFT(KC_NUBS)
+#define KX_TILDA        LSFT(KC_NUHS)
+
+ 
 const uint16_t PROGMEM keymaps[][ MATRIX_ROWS ][ MATRIX_COLS ] = {
-
- /* Balance Twelve mirror variant (left-handed)
-  .--------------------------------.         .------------------------------.
-  | P    | L    | C   | D  | W     |         | U    | O  | Y   | K    | Q   |
-  +------+------+-----+----+-------|         |------+----+-----+------+-----|
-  | N    | R    | S   | T  | M     |         | A    | E  | I   | H    | V   |
-  +------+------+-----+----+-------|         |------+----+-----+------+-----|
-  | Z    | J    | F   | G  | B     |         | ,    | .  | ;   | X    | -   |
-  +------+------+-----+----+-------+---------+------+----+-----+------+-----|
-  | Shft | Ctrl | Alt | Bk | Space | L1 | R1 | Shft | R2 | Win | Ctrl | Alt |
-  '-------------------------------------------------------------------------'
-  */
-  [BASE] = LAYOUT(
-    KC_P,    KC_L,    KC_C,    KC_D,    KC_W,                   KC_U,          KC_O,   KC_Y,    KC_K,    KC_Q,
-    KC_N,    KC_R,    KC_S,    KC_T,    KC_M,                   KC_A,          KC_E,   KC_I,    KC_H,    KC_V,
-    KC_Z,    KC_J,    KC_F,    KC_G,    KC_B,                   KC_COMM,       KC_DOT, KC_SCLN, KC_X,    KC_MINS,
-    KC_LSFT, KC_LCTL, KC_LALT, KC_BSPC, KC_SPC, MO(L1), MO(R1), OSM(MOD_LSFT), MO(R2), KC_LWIN, KC_RCTL, KC_RALT
+  /*
+    .--------.-------.-------.-------.--------.                           .-------.-------.-------.-------.------.
+    | P      | L     | C     | D     | W      |                           | U     | O     | Y     | K     | Q    |
+    |--------+-------+-------+-------+--------|                           |-------+-------+-------+-------+------|
+    | N      | R     | S     | T     | M      |                           | A     | E     | I     | H     | V    |
+    |--------+-------+-------+-------+--------|                           |-------+-------+-------+-------+------|
+    | Z Sft  | J Ctl | F Alt | G     | B      |                           | ,     | . Alt | ; Ctl | X Sft | Sup  |
+    '--------'-------'-------+-------+--------+-----.               .-----+-------+-------+-------'-------'------'
+                             | BS P1 | Spc P2 | P3  |               |     | Sft   |       |
+                             '-------'--------'-----'               '-----'-------'-------'
+  */                                                               
+  [BA] = LAYOUT(                                                   
+    KC_P,     KC_L,     KC_C,     KC_D,       KC_W,                          KC_U,    KC_O,       KC_Y,        KC_K,     KC_Q,
+    KC_N,     KC_R,     KC_S,     KC_T,       KC_M,                          KC_A,    KC_E,       KC_I,        KC_H,     KC_V,
+    KX_SFT_Z, KX_CTL_J, KX_ALT_F, KC_G,       KC_B,                          KC_COMM, KX_ALT_DOT, KX_CTL_SCLN, KX_SFT_X, KC_LGUI,
+    XXXXXXX,  XXXXXXX,  XXXXXXX,  KX_P1_BSPC, KX_P2_SPC, MO(P3),    XXXXXXX, KC_RSFT, XXXXXXX,    XXXXXXX,     XXXXXXX,  XXXXXXX
   ),
 
- /* L1
-  .---------------------------------.         .--------------------------------.
-  | 1    | 2    | 3    | 4  | 5     |         | 6    | 7  | 8   | 9    | 0     |
-  |------+------+------+----+-------|         |------+----+-----+------+-------|
-  | Tab  | ?    | =    | -  | _     |         | '    | "  | +   | *    | Enter |
-  |------+------+------+----+-------|         |------+----+-----+------+-------|
-  | Esc  | !    | &    |    |       |         | ,    | .  | ;   |      | -     |
-  |------+------+------+----+-------+---------+------+----+-----+------+-------|
-  | Shft | Ctrl | Alt  | Bk | Space | L1 | R1 | Shft | R2 | Sup | Ctrl | Alt   |
-  '----------------------------------------------------------------------------'
+  /* P1: Punctuation (1)
+    .--------.-------.-------.-------.-------.                              .------.-------.-------.-------.------.
+    | Esc    |       |       |       | RS    |                              | |    | /     | ^     | <EFBFBD>     |  ~   |
+    |--------+-------+-------+-------+-------|                              |------+-------+-------+-------+------|
+    | Tab    |       |       |       |       |                              | &    | \     | `     | $     | Ent  |
+    |--------+-------+-------+-------+-------|                              |------+-------+-------+-------+------|
+    | Sft    | Ctl   | Alt   | Del   |       |                              | %    | Alt   | Ctl   | Sft   | Sup  |
+    '--------'-------'-------+-------+-------+-----.                  .-----+------+-------+-------'-------'------'
+                             | P1    |       |     |                  |     | Sft  |       |
+                             '-------'-------'-----'                  '-----'------'-------'
   */
-  [L1] = LAYOUT(
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,       KC_8,    KC_9,    KC_0,
-    KC_TAB,  KC_QUES, KC_EQL,  KC_MINS, KC_UNDS,                   KC_QUOT, LSFT(KC_2), KC_PLUS, KC_ASTR, KC_ENT,
-    KC_ESC,  KC_EXLM, KC_AMPR, XXXXXXX, XXXXXXX,                   _______, _______,    _______, XXXXXXX, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______
+  [P1] = LAYOUT(
+    KC_ESC,  XXXXXXX,    XXXXXXX,    XXXXXXX,  TO(RS),                         KX_PIPE, KC_SLSH, KC_CIRC, KC_HASH, KX_TILDA,  
+    KC_TAB,  XXXXXXX,    XXXXXXX,    XXXXXXX,  XXXXXXX,                        KC_AMPR, KC_NUBS, KC_GRV,  KC_DLR,  KC_ENT,
+    KC_LSFT, KC_LCTL,    KC_LALT,    KC_DEL,   XXXXXXX,                        KC_PERC, KC_LALT, KC_LCTL, KC_LSFT, _______,
+    XXXXXXX, XXXXXXX,    XXXXXXX,    _______,  XXXXXXX, XXXXXXX,      XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
   ),
 
- /* R1
-  .---------------------------------.         .-------------------------------.
-  | <    | >    | {   | }   | @     |         | $    | <EFBFBD>  |     |      | R3   |
-  +------+------+-----+-----|-------|         |------+----+-----+------+------|
-  | [    | ]    | (   | )   | #     |         | '    | "  | ~   | `    | Caps |
-  |------+------+-----+-----+-------|         |------+----+-----+------+------|
-  | /    | \    | ^   | |   | %     |         | ,    | .  | ;   |      | PScn |
-  |------+------+-----+-----+-------+---------+------+----+-----+------+------|
-  | Shft | Ctrl | Alt | Del | Space | L1 | R1 | Shft | R2 | Sup | Ctrl | Alt  |
-  '---------------------------------------------------------------------------'
+  /* P2: Punctuation (2)
+    .-------.-------.-------.-------.-------.                               .-------.-------.-------.-------.------.
+    | Esc   |       | NC    | FV    |       |                               | (     | )     | "     | ?     |      |
+    |-------+-------+-------+-------+-------|                               |-------+-------+-------+-------+------|
+    | Tab   | Ctl-X | Ctl-C | Ctl-V | Ctl-Z |                               | {     | }     | '     | !     | Ent  |
+    |-------+-------+-------+-------+-------|                               |-------+-------+-------+-------+------|
+    | Sft   | Ctl   | Alt   | Del   | Ent   |                               | #     | Alt   | Ctl   | Sft   | Sup  |
+    '-------'-------'-------+-------+-------+-----.                   .-----+-------+-------+-------'-------'------'
+                            | BS    | P2    |     |                   |     | Sft   |       |
+                            '-------'-------'-----'                   '-----'-------'-------'
   */
-  [R1] = LAYOUT(
-    KC_LABK, KC_RABK,  KC_LCBR,  KC_RCBR, KX_AT,                     KC_DLR,  KC_HASH,    XXXXXXX,       XXXXXXX, MO(R3),
-    KC_LBRC, KC_RBRC,  KC_LPRN,  KC_RPRN, KC_NUHS,                   KC_QUOT, LSFT(KC_2), LSFT(KC_NUHS), KC_GRV,  KC_CAPS,
-    KC_SLSH, KC_NUBS,  KC_CIRC,  KX_PIPE, KC_PERC,                   _______, _______,    _______,       XXXXXXX, KC_PSCR,
-    _______, _______,  _______,  KC_DEL,  _______, _______, _______, _______, _______,    _______,       _______, _______
+  [P2] = LAYOUT(
+    KC_ESC,  XXXXXXX,    TO(NC),     TO(FV),     XXXXXXX,                      KC_LPRN, KC_RPRN, KX_DQUOT, KC_QUES, XXXXXXX,
+    KC_TAB,  LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), LCTL(KC_Z),                   KC_LCBR, KC_RCBR, KC_QUOT,  KC_EXLM, KC_ENT,
+    KC_LSFT, KC_LCTL,    KC_LALT,    KC_DEL,     KC_ENT,                       KC_NUHS, KC_LALT, KC_LCTL,  KC_LSFT, _______,
+    XXXXXXX, XXXXXXX,    XXXXXXX,    KC_BSPC,    _______,    XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX
   ),
 
- /* R2
-  .-----------------------------------.         .--------------------.-----------------.
-  | F12  | F11  | F10  | F9   | Copy  |         | Home | Up   | End  | PgUp | Insert   |
-  |------+------+------+------+-------|         |------+------+------+------+----------|
-  | F8   | F7   | F6   | F5   | Paste |         | Left | Down | Right| PgDn | Enter    |
-  |------+------+------+------+-------|         |------+------+------+------+----------|
-  | F4   | F3   | F2   | F1   | Cut   |         | ^Tab |      | Tab  |      |          |
-  |------+------+------+------+-------+---------+------+------+------+------+----------|
-  | Shft | Ctrl | Alt  | Del  | Undo  | L1 | R1 | Shft | R2   | Sup  | Ctrl | WinRight |
-  '------------------------------------------------------------------------------------'
+  /* P3: Punctuation (3)
+    .-------.-------.-------.-------.-------.                             .------.-------.-------.-------.------.
+    | Esc   |       | Break | Pscr  | ScLk  |                             | <    | >     | +     | _     | =    |
+    |-------+-------+-------+-------+-------|                             |------+-------+-------+-------+------|
+    | Tab   |       |       | Caps  |       |                             | [    | ]     | *     | -     | Ent  |
+    |-------+-------+-------+-------+-------|                             |------+-------+-------+-------+------|
+    | Sft   | Ctl   | Alt   | Del   |       |                             | @    | Alt   | Ctl   | Sft   | Sup  |
+    '-------'-------'-------+-------+-------+-----.                 .-----+------+-------+-------'-------'------'
+                            | BS    |       | P3  |                 |     | Sft  |       |
+                            '-------'-------'-----'                 '-----'------'-------'
   */
-  [R2] = LAYOUT(
-    KC_F12,  KC_F11,  KC_F10,  KC_F9,  KX_COPY,                   KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_INS, 
-    KC_F8,   KC_F7,   KC_F6,   KC_F5,  KX_PAST,                   KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_ENT,
-    KC_F4,   KC_F3,   KC_F2,   KC_F1,  KX_CUT,                    KCX_LST, XXXXXXX, KC_TAB,  XXXXXXX, XXXXXXX, 
-    _______, _______, _______, KC_DEL, KX_UNDO, _______, _______, _______, _______, _______, _______, KX_WINR
+  [P3] = LAYOUT(
+    KC_ESC,  XXXXXXX, KC_BRK,  KC_PSCR, KC_SLCK,                             KC_LABK, KC_RABK, KC_PLUS, KC_UNDS, KC_EQL,
+    KC_TAB,  XXXXXXX, XXXXXXX, KC_CAPS, XXXXXXX,                             KC_LBRC, KC_RBRC, KC_ASTR, KC_MINS, KC_ENT,
+    KC_LSFT, KC_LCTL, KC_LALT, KC_DEL,  XXXXXXX,                             KX_AT,   KC_LALT, KC_LCTL, KC_LSFT, _______,
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, XXXXXXX, _______,           XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
   ),
 
- /* R3
-  .----------------------------.         .------------------------.
-  | RESET |    |     |    |    |         |    |    |    |    | R3 |
-  |-------+----+-----+----+----|         |----+----+----+----+----|
-  |       |    |     |    |    |         |    |    |    |    |    |
-  |-------+----+-----+----+----|         |----+----+----+----+----|
-  |       |    |     |    |    |         |    |    |    |    |    |
-  |-------+----+-----+----+----+---------+----+----+----+----+----|
-  |       |    |     |    |    |    |    |    |    |    |    |    |
-  '---------------------------------------------------------------'
+  /* NC: Numerals / Cursor control
+    .-------.-------.-------.------.-------.                              .------.-------.-------.------.------.
+    | 1     | 2     | 3     | 4    | 5     |                              | Home | Up    | End   | PgUp |      |
+    |-------+-------+-------+------+-------|                              |------+-------+-------+------+------|
+    | 6     | 7     | 8     | 9    | 0     |                              | Left | Down  | Right | PgDn |      |
+    |-------+-------+-------+------+-------|                              |------+-------+-------+------+------|
+    | Sft   | Ctl   | Alt   | Del  | .     |                              | Ins  | Alt   | Ctl   | Sft  | Sup  |
+    '-------'-------'-------+------+-------+-----.                  .-----+------+-------+-------'------'------'
+                            | BS   | BA    |     |                  |     | Sft  |       |
+                            '------'-------'-----'                  '-----'------'-------'
   */
-  [R3] = LAYOUT(
-    RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+  [NC] = LAYOUT(
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                KC_HOME, KC_UP,   KC_END,  KC_PGUP, XXXXXXX,
+    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,                                KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, XXXXXXX,
+    KC_LSFT, KC_LCTL, KC_LALT, KC_DEL,  KC_DOT,                              KC_INS,  KC_LALT, KC_LCTL, KC_LSFT, _______,
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, TO(BA), XXXXXXX,            XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+  ),
+
+  /* FV: Function keys / Cursor control (Vim)
+    .-------.------.-------.-----.-------.                                .------.-------.-----.-------.------.
+    | F1    | F2   | F3    | F4  | F5    |                                | 0    | K     | $   | Ctl-B |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    | F6    | F7   | F8    | F9  | F10   |                                | H    | J     | L   | Ctl-F |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    | Sft   | Ctl  | Alt   | F11 | F12   |                                |      | Alt   | Ctl | Sft   | Sup  |
+    '-------'------'-------+-----+-------+-----.                    .-----+------+-------+-----'-------'------'
+                           | BS  | BA    |     |                    |     | Sft  |       |
+                           '-----'-------'-----'                    '-----'------'-------'
+  */
+  [FV] = LAYOUT(
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                               KC_0,    KC_K,    KC_DLR,   LCTL(KC_B), XXXXXXX,
+    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,                              KC_H,    KC_J,    KC_L,     LCTL(KC_F), XXXXXXX,
+    KC_LSFT, KC_LCTL, KC_LALT, KC_F11,  KC_F12,                              XXXXXXX, KC_LALT, KC_LCTL,  KC_LSFT,    _______,
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, TO(BA), XXXXXXX,            XXXXXXX, _______, XXXXXXX, XXXXXXX,  XXXXXXX,    XXXXXXX
+  ),
+
+ /* RS: Reset
+    .-------.------.-------.-----.-------.                                .------.-------.-----.-------.------.
+    | RESET |      |       |     |       |                                |      |       |     |       |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    |       |      |       |     |       |                                |      |       |     |       |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    |       |      |       |     |       |                                |      |       |     |       |      |
+    '-------'------'-------+-----+-------+-----.                    .-----+------+-------+-----'-------'------'
+                           |     | BA    |     |                    |     |      |       |
+                           '-----'-------'-----'                    '-----'------'-------'
+  */
+  [RS] = LAYOUT(
+    RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                             XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                             XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                             XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TO(BA),  XXXXXXX,           XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
   )
 };
 

keyboards/boardwalk/boardwalk.h

@@ -0,0 +1,78 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_5x14( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \
+  k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k410, k411, k412, k413 \
+) \
+{ \
+  { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013 }, \
+  { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113 }, \
+  { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213 }, \
+  { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313 }, \
+  { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k410, k411, k412, k413 } \
+}
+
+#define LAYOUT_ortho_hhkb( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \
+       k41, k42, k43, k44,   k45,     k47,     k49, k410, k411, k412       \
+) \
+{ \
+  { k00,   k01, k02, k03, k04, k05, k06,   k07, k08,   k09, k010, k011, k012, k013   }, \
+  { k10,   k11, k12, k13, k14, k15, k16,   k17, k18,   k19, k110, k111, k112, k113   }, \
+  { k20,   k21, k22, k23, k24, k25, k26,   k27, k28,   k29, k210, k211, k212, k213   }, \
+  { k30,   k31, k32, k33, k34, k35, k36,   k37, k38,   k39, k310, k311, k312, k313   }, \
+  { KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, KC_NO, k49, k410, k411, k412, KC_NO } \
+}
+
+#define LAYOUT_ortho_7u( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \
+       k41, k42,                       k46,               k411, k412        \
+) \
+{ \
+  { k00,   k01, k02, k03,   k04,   k05,   k06, k07,   k08,   k09,   k010,  k011, k012, k013   }, \
+  { k10,   k11, k12, k13,   k14,   k15,   k16, k17,   k18,   k19,   k110,  k111, k112, k113   }, \
+  { k20,   k21, k22, k23,   k24,   k25,   k26, k27,   k28,   k29,   k210,  k211, k212, k213   }, \
+  { k30,   k31, k32, k33,   k34,   k35,   k36, k37,   k38,   k39,   k310,  k311, k312, k313   }, \
+  { KC_NO, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k411, k412, KC_NO } \
+}
+
+#define LAYOUT_2u_arrow( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \
+  k40, k41, k42, k43,    k44,      k46,   k48, k49, k410, k411, k412, k413 \
+) \
+{ \
+  { k00, k01, k02, k03, k04, k05,   k06, k07,   k08, k09, k010, k011, k012, k013 }, \
+  { k10, k11, k12, k13, k14, k15,   k16, k17,   k18, k19, k110, k111, k112, k113 }, \
+  { k20, k21, k22, k23, k24, k25,   k26, k27,   k28, k29, k210, k211, k212, k213 }, \
+  { k30, k31, k32, k33, k34, k35,   k36, k37,   k38, k39, k310, k311, k312, k313 }, \
+  { k40, k41, k42, k43, k44, KC_NO, k46, KC_NO, k48, k49, k410, k411, k412, k413 } \
+}
+
+#define LAYOUT_625u_arrow( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \
+  k40, k41, k42,              k45,             k49, k410, k411, k412, k413 \
+) \
+{ \
+  { k00, k01, k02, k03,   k04,   k05,   k06,   k07,   k08,   k09, k010, k011, k012, k013 }, \
+  { k10, k11, k12, k13,   k14,   k15,   k16,   k17,   k18,   k19, k110, k111, k112, k113 }, \
+  { k20, k21, k22, k23,   k24,   k25,   k26,   k27,   k28,   k29, k210, k211, k212, k213 }, \
+  { k30, k31, k32, k33,   k34,   k35,   k36,   k37,   k38,   k39, k310, k311, k312, k313 }, \
+  { k40, k41, k42, KC_NO, KC_NO, k45,   KC_NO, KC_NO, KC_NO, k49, k410, k411, k412, k413 } \
+}

keyboards/boardwalk/config.h

@@ -0,0 +1,84 @@
+/*
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCDCD
+#define PRODUCT_ID      0x5337
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    shens
+#define PRODUCT         Boardwalk
+#define DESCRIPTION     QMK keyboard firmware for Boardwalk
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
+#define MATRIX_COL_PINS { F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN F5
+// #define BACKLIGHT_LEVELS 6
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+// ws2812 options
+#define RGB_DI_PIN B7 // pin the DI on the ws2812 is hooked-up to
+#define RGBLIGHT_ANIMATIONS // run RGB animations
+#define RGBLED_NUM 14 // number of LEDs
+#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
+#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
+#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)

keyboards/boardwalk/info.json

@@ -0,0 +1,359 @@
+{
+    "keyboard_name": "Boardwalk",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+      "LAYOUT_ortho_5x14": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2},
+          {"label":"k213", "x":13.5, "y":2, "w":1.5},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3},
+          {"label":"k312", "x":12.5, "y":3},
+          {"label":"k313", "x":13.5, "y":3, "w":1.5},
+          {"label":"k40", "x":0, "y":4, "w":1.5},
+          {"label":"k41", "x":1.5, "y":4},
+          {"label":"k42", "x":2.5, "y":4},
+          {"label":"k43", "x":3.5, "y":4},
+          {"label":"k44", "x":4.5, "y":4},
+          {"label":"k45", "x":5.5, "y":4},
+          {"label":"k46", "x":6.5, "y":4},
+          {"label":"k47", "x":7.5, "y":4},
+          {"label":"k48", "x":8.5, "y":4},
+          {"label":"k49", "x":9.5, "y":4},
+          {"label":"k410", "x":10.5, "y":4},
+          {"label":"k411", "x":11.5, "y":4},
+          {"label":"k412", "x":12.5, "y":4},
+          {"label":"k413", "x":13.5, "y":4, "w":1.5}
+        ]
+      },
+      "LAYOUT_ortho_hhkb": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2},
+          {"label":"k213", "x":13.5, "y":2, "w":1.5},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3},
+          {"label":"k312", "x":12.5, "y":3},
+          {"label":"k313", "x":13.5, "y":3, "w":1.5},
+          {"label":"k41", "x":1.5, "y":4},
+          {"label":"k42", "x":2.5, "y":4},
+          {"label":"k43", "x":3.5, "y":4},
+          {"label":"k44", "x":4.5, "y":4},
+          {"label":"k45", "x":5.5, "y":4, "w":2},
+          {"label":"k47", "x":7.5, "y":4, "w":2},
+          {"label":"k49", "x":9.5, "y":4},
+          {"label":"k410", "x":10.5, "y":4},
+          {"label":"k411", "x":11.5, "y":4},
+          {"label":"k412", "x":12.5, "y":4}
+        ]
+      },
+      "LAYOUT_ortho_7u": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2},
+          {"label":"k213", "x":13.5, "y":2, "w":1.5},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3},
+          {"label":"k312", "x":12.5, "y":3},
+          {"label":"k313", "x":13.5, "y":3, "w":1.5},
+          {"label":"k41", "x":1.5, "y":4},
+          {"label":"k42", "x":2.5, "y":4, "w":1.5},
+          {"label":"k46", "x":4, "y":4, "w":7},
+          {"label":"k411", "x":11, "y":4, "w":1.5},
+          {"label":"k412", "x":12.5, "y":4}
+        ]
+      },
+      "LAYOUT_2u_arrow": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2, "w":1.5},
+          {"label":"k213", "x":14, "y":2},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3, "w":1.5},
+          {"label":"k312", "x":13, "y":3},
+          {"label":"k313", "x":14, "y":3},
+          {"label":"k40", "x":0, "y":4, "w":1.25},
+          {"label":"k41", "x":1.25, "y":4, "w":1.25},
+          {"label":"k42", "x":2.5, "y":4},
+          {"label":"k43", "x":3.5, "y":4},
+          {"label":"k44", "x":4.5, "y":4, "w":2},
+          {"label":"k46", "x":6.5, "y":4, "w":2},
+          {"label":"k48", "x":8.5, "y":4},
+          {"label":"k49", "x":9.5, "y":4, "w":1.25},
+          {"label":"k410", "x":10.75, "y":4, "w":1.25},
+          {"label":"k411", "x":12, "y":4},
+          {"label":"k412", "x":13, "y":4},
+          {"label":"k413", "x":14, "y":4}
+        ]
+      },
+      "LAYOUT_625u_arrow": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2, "w":1.5},
+          {"label":"k213", "x":14, "y":2},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3, "w":1.5},
+          {"label":"k312", "x":13, "y":3},
+          {"label":"k313", "x":14, "y":3},
+          {"label":"k40", "x":0, "y":4, "w":1.25},
+          {"label":"k41", "x":1.25, "y":4, "w":1.25},
+          {"label":"k42", "x":2.5, "y":4},
+          {"label":"k45", "x":3.5, "y":4, "w":6.25},
+          {"label":"k49", "x":9.75, "y":4},
+          {"label":"k410", "x":10.75, "y":4, "w":1.25},
+          {"label":"k411", "x":12, "y":4},
+          {"label":"k412", "x":13, "y":4},
+          {"label":"k413", "x":14, "y":4}
+        ]
+      }
+    }
+  }

keyboards/boardwalk/keymaps/default/config.h

@@ -0,0 +1,16 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once

keyboards/boardwalk/keymaps/default/keymap.c

@@ -0,0 +1,162 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+// Layer shorthand
+enum layer {
+  _1U,
+  _FN,
+  _HHKB,
+  _7U,
+  _2UARROW,
+  _625UARROW,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* 1uGrid
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | [      | ]      | Y      | U      | I      | O      | P      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | CAP LK | A      | S      | D      | F      | G      | HOME   | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | END    | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | LGUI   | FN     | LALT   | SPACE  | SPACE  | SPACE  | SPACE  | SPACE  | SPACE  | RIGHT  | DOWN   | UP     | RIGHT  |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_1U] = LAYOUT_ortho_5x14(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC, KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_QUOT, \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME, KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,  \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+  KC_LCTL, KC_LGUI, MO(1),   KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_RCTL  \
+ ),
+
+ /* HHKB
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | [      | ]      | Y      | U      | I      | O      | P      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | CAP LK | A      | S      | D      | F      | G      | HOME   | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | END    | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * |        | LCTRL  | FN     | LALT   | LGUI   |      SPACE      |      SPACE      | LEFT   | DOWN  | UP      | RIGHT  |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_HHKB] = LAYOUT_ortho_hhkb(
+  KC_ESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, KC_6,   KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    _______, _______, KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    _______, _______, KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    _______, _______, KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+           KC_LCTL, MO(1),   KC_LALT, KC_LGUI,       KC_SPC,         KC_SPC,      KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT           \
+ ),
+
+  /* 7u HHKB
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | [      | ]      | Y      | U      | I      | O      | P      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | CAP LK | A      | S      | D      | F      | G      | HOME   | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | END    | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * |        | LCTRL  | LALT       |                             SPACE                            | RALT        | FN     |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_7U] = LAYOUT_ortho_7u(
+  KC_ESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, KC_6,   KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    _______, _______, KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    _______, _______, KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    _______, _______, KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+           KC_LCTL, KC_LALT,                                KC_SPC,                                 KC_RALT, MO(1)             \
+ ),
+
+ /* 2x2u Space with Arrows
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | \      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | CAP LK | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | "      | ENTER  | PG UP  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | SHIFT  | UP     | PG DN  |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | LGUI   | FN     | LALT   |      SPACE      |      SPACE      | RALT   | RGUI   | RCTRL  | LEFT   | DOWN   | RIGHT  |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_2UARROW] = LAYOUT_2u_arrow(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_QUOT, \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_BSLS, KC_ENT,  KC_PGUP, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN, \
+  KC_LCTL, KC_LGUI, MO(1),   KC_LALT,     KC_SPC,          KC_SPC,        KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
+ ),
+
+  /* 6.25u Space with Arrows
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | \      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | CAP LK | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | "      | ENTER  | PG UP  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | SHIFT  | UP     | PG DN  |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | LGUI   | LALT   |                        SPACE                        | FN     | RCTRL  | LEFT   | DOWN   | RIGHT  |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_625UARROW] = LAYOUT_625u_arrow(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_QUOT, \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_BSLS, KC_ENT,  KC_PGUP, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN, \
+  KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                      MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
+ ),
+
+/* FUNCTION
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+
+ [_FN] = LAYOUT_ortho_5x14(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};

keyboards/boardwalk/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Boardwalk

keyboards/boardwalk/keymaps/mcallaster/keymap.c

@@ -0,0 +1,54 @@
+#include QMK_KEYBOARD_H
+
+// Layer shorthand
+enum layer {
+  _BASE,
+  _LOWER,
+  _RAISE,
+  _FN
+};
+
+#define LOWER MO(1)
+#define RAISE MO(2)
+#define FN    MO(3)
+
+// Mac sleep
+#define __SLEEP S(LCTL(KC_POWER))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_ortho_hhkb(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_SLCK, KC_PSCR, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_GRV,  \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_HOME, KC_PGUP, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_END,  KC_PGDN, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_DEL,  KC_INS,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  \
+           KC_CAPS, KC_LALT, KC_LGUI, RAISE,        KC_SPC,           KC_SPC,      LOWER,   KC_RGUI, KC_RALT, KC_RCTL
+  ),
+
+  [_LOWER] = LAYOUT_ortho_hhkb(
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_PAUS, KC_NLCK, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, \
+  _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GRV,  KC_BSLS, _______, _______, _______, \
+           _______, _______, _______, _______,       _______,       _______,       _______, _______, _______, _______
+  ),
+
+  [_RAISE] = LAYOUT_ortho_hhkb(
+  _______, KC_F11,  KC_F12,  _______, _______, _______, KC_PAUS, KC_NLCK, _______, _______, _______, _______, _______, _______, \
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_TILD, KC_PIPE, _______, _______, _______, \
+           _______, _______, _______, _______,       _______,       _______,       _______, _______, _______, _______
+  ),
+
+  [_FN] = LAYOUT_ortho_hhkb(
+  __SLEEP, _______, _______, _______, _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, \
+  _______, RESET,   _______, KC_MPRV, KC_MNXT, _______, RGB_SAI, RGB_HUI, _______, _______, _______, _______, _______, _______, \
+  _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, _______, RGB_SAD, RGB_HUD, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, \
+  _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, \
+           _______, _______, _______, _______,       _______,       _______,       _______, _______, _______, _______
+  )
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _FN);
+}

keyboards/boardwalk/keymaps/nchristus/config.h

@@ -0,0 +1,16 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once

keyboards/boardwalk/keymaps/nchristus/keymap.c

@@ -0,0 +1,62 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+// Layer shorthand
+#define _QW 0
+
+#define LOWER LT(1, KC_SPC)
+#define RAISE LT(2, KC_ENT)
+
+#define CTRLESC CTL_T(KC_ESC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _QWE: Base Layer (Default Layer) */
+  [_QW] = LAYOUT_ortho_hhkb(
+  KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, KC_6,   KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    _______, _______, KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  CTRLESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    _______, _______, KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    _______, _______, KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+           MO(3),   KC_LCTL, KC_LALT, KC_LGUI,       RAISE,         LOWER,        KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT           \
+  ),
+
+  /* Keymap LOWER: Lower Layer */
+  [1] = LAYOUT_ortho_hhkb(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+           _______, _______, _______, _______,       XXXXXXX,       _______,       _______, _______, _______, _______
+  ),
+
+  /* Keymap RAISE: Raise Layer */
+  [2] = LAYOUT_ortho_hhkb(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_EQL,  KC_LCBR, KC_RCBR, KC_PIPE, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+           _______, _______, _______, _______,       _______,       XXXXXXX,       _______, _______, _______, _______
+  ),
+
+  /* Keymap _FL: Function Layer */
+  [3] = LAYOUT_ortho_hhkb(
+  RESET,   _______, _______, _______, _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+           _______, _______, _______, _______,       _______,       _______,       _______, _______, _______, _______
+  )
+};

keyboards/boardwalk/keymaps/nchristus/readme.md

@@ -0,0 +1 @@
+# The default keymap for Boardwalk

keyboards/boardwalk/keymaps/nchristus/rules.mk

@@ -0,0 +1,14 @@
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+RGBLIGHT_ENABLE = yes

keyboards/boardwalk/readme.md

@@ -0,0 +1,16 @@
+# Boardwalk
+
+![Boardwalk](https://i.imgur.com/CQj3b9E.jpg)
+
+The Boardwalk is a 60% ortholinear keyboard, designed around Ergodox keycap sets and to fit into many standard 60% cases. The project was inspired by OLKB’s Atomic keyboard, which used larger 2u mods, but u/shensmobile
+decided to switch to 1.5u keys so that Ergodox sets would provide excellent compatibility. The rest of the board can be covered using standard key sizes from 60% sets.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Boardwalk Ortholinear PCB  
+Hardware Availability: [panc.co](https://www.panc.co/boardwalk-group-buy.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make boardwalk:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/boardwalk/rules.mk

@@ -0,0 +1,66 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+BOOTLOADER = atmel-dfu
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes        # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+LAYOUTS = ortho_5x14

keyboards/bpiphany/sixshooter/readme.md

@@ -2,12 +2,12 @@
 
 A PCB for the CM Storm switch tester utilizing a Teensy 2.0 designed by Bpiphany. Because the PCB was designed with individual pins for each LED, there are custom keycodes (`SS_LON` and `SS_LOFF`) for turning on and off the backlight LEDs.
 
-Keyboard Maintainer: QMK Community\
-Hardware Supported: Six Shooter PCB, Teensy 2.0\
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Six Shooter PCB, Teensy 2.0  
 Hardware Availability: [GeekHack.org](https://geekhack.org/index.php?topic=70033.0)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make sixshooter:default
+    make bpiphany/sixshooter:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/candybar/rules.mk

@@ -39,11 +39,11 @@ EXTRAFLAGS+=-flto
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes # Mouse keys
+MOUSEKEY_ENABLE = no # Mouse keys
 EXTRAKEY_ENABLE = yes # Audio control and System control
 CONSOLE_ENABLE = yes  # Console for debug
 COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes     # USB Nkey Rollover
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = no

keyboards/chimera_ortho/keymaps/dcompact/readme.md

@@ -34,10 +34,10 @@ merge with those in the keyboard folder_
 
 ## Relevant Links
 
-- ![Online Dvorak Layout Trainer](https://learn.dvorak.nl/)
-- ![Dvorak Wikipedia Page](https://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard)
-- ![QMK Docs](https://docs.qmk.fm/#/)
-- ![QMK KeyCode Reference](https://docs.qmk.fm/#/keycodes)
+- [Online Dvorak Layout Trainer](https://learn.dvorak.nl/)
+- [Dvorak Wikipedia Page](https://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard)
+- [QMK Docs](https://docs.qmk.fm/#/)
+- [QMK KeyCode Reference](https://docs.qmk.fm/#/keycodes)
 
 ## Contact
 

keyboards/clueboard/66_hotswap/66_hotswap.h

@@ -3,3 +3,7 @@
 #ifdef KEYBOARD_clueboard_66_hotswap_gen1
     #include "gen1.h"
 #endif
+
+#ifdef KEYBOARD_clueboard_66_hotswap_prototype
+    #include "prototype.h"
+#endif

keyboards/clueboard/66_hotswap/config.h

@@ -16,7 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #pragma once
-
 #include "config_common.h"
 
 /* USB Device descriptor parameter */

keyboards/clueboard/66_hotswap/gen1/chconf.h

@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/clueboard/66_hotswap/gen1/config.h

@@ -1,44 +1,146 @@
-#pragma once
+/*
+ * Copyright 2017 skully <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 
+#pragma once
 #include "config_common.h"
 
-#define PRODUCT_ID      0x2390
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x2391
 #define DEVICE_VER      0x0001
+#define MANUFACTURER    Clueboard
+
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
 
 /* key matrix size */
 #define MATRIX_ROWS 10
 #define MATRIX_COLS 8
 
-/* ROWS: Top to bottom, COLS: Left to right
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
 */
-#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 }
-#define UNUSED_PINS
+#define MATRIX_ROW_PINS { B11, A6, A3, A2, A1, B5, B6, C15, C14, C13 }
+#define MATRIX_COL_PINS { B10, B2, B1, B0, A7, B4, B3, B7 }
+#define UNUSED_PINS { A0, A8, A15, B12, B13, B14, B15 }
+#define DIODE_DIRECTION COL2ROW
 
-/* Speaker configuration
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
  */
-#define B7_AUDIO
-#define NO_MUSIC_MODE
-#define AUDIO_CLICKY
+//#define FORCE_NKRO
 
-/* Backlight configuration
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
  */
-#define BACKLIGHT_LEVELS 1
 
-/* Underlight configuration
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
  */
-#define RGB_DI_PIN D7
-#define RGBLED_NUM 26     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 32
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
 
-#define RGBLIGHT_ANIMATIONS
-#define RGBLIGHT_EFFECT_BREATHE_CENTER 1
-#define RGBLIGHT_EFFECT_BREATHE_MAX 200
-#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2
-#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
-#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 4   // How many LEDs wide to light up
-#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 16   // The led to start at
-#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8  // How many LEDs to travel
-#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4    // How many LEDs wide to light up
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+ /* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 10
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define LED_DRIVER_ADDR_1 0b1110100
+#define I2C1_BANK GPIOB
+#define I2C1_SCL 8
+#define I2C1_SDA 9
+
+#define LED_DRIVER_COUNT 1
+#define LED_DRIVER_LED_COUNT 71

keyboards/clueboard/66_hotswap/gen1/gen1.c

@@ -1,63 +1,186 @@
+/* Copyright 2017 Clueboard <info@clueboard.co>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include "gen1.h"
-#include <avr/io.h>
-#include "backlight.h"
-#include "print.h"
+#include "is31fl3731-simple.h"
 
 void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
 }
 
-
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
-void backlight_init_ports(void) {
-    print("init_backlight_pin()\n");
-    // Set our LED pins as output
-    DDRD |= (1<<0); // Esc
-    DDRD |= (1<<4); // Page Up
-    DDRD |= (1<<1); // Arrows
+#ifdef LED_MATRIX_ENABLE
+const is31_led g_is31_leds[LED_DRIVER_LED_COUNT] = {
+/* Refer to IS31 manual for these locations
+ *  driver
+ *  |   LED address
+ *  |   | */
+    {0, C1_1},  // k00  KC_GESC
+    {0, C1_2},  // k01 KC_1
+    {0, C1_3},  // k02 KC_2
+    {0, C1_4},  // k03 KC_3
+    {0, C1_5},  // k04 KC_4
+    {0, C1_6},  // k05 KC_5
+    {0, C1_7},  // k06 KC_6
+    {0, C1_8},  // k07 KC_7
+    {0, C1_9},  // k50 KC_8
+    {0, C1_10}, // k51 KC_9
+    {0, C1_11}, // k52 KC_0
+    {0, C1_12}, // k53 KC_MINS
+    {0, C1_13}, // k54 KC_EQL
+    {0, C1_14}, // k55 KC_BSPC
+    {0, C1_15}, // k57 KC_PGUP
+    {0, C2_1},  // k10 KC_TAB
+    {0, C2_2},  // k11 KC_Q
+    {0, C2_3},  // k12 KC_W
+    {0, C2_4},  // k13 KC_E
+    {0, C2_5},  // k14 KC_R
+    {0, C2_6},  // k15 KC_T
+    {0, C2_7},  // k16 KC_Y
+    {0, C2_8},  // k17 KC_U
+    {0, C2_9},  // k60 KC_I
+    {0, C2_10}, // k61 KC_O
+    {0, C2_11}, // k62 KC_P
+    {0, C2_12}, // k63 KC_LBRC
+    {0, C2_13}, // k64 KC_RBRC
+    {0, C2_14}, // k65 KC_BSLS
+    {0, C2_15}, // k67 KC_PGDN
+    {0, C3_1},  // k20 KC_CAPS
+    {0, C3_2},  // k21 KC_A
+    {0, C3_3},  // k22 KC_S
+    {0, C3_4},  // k23 KC_D
+    {0, C3_5},  // k24 KC_F
+    {0, C3_6},  // k25 KC_G
+    {0, C3_7},  // k26 KC_H
+    {0, C3_8},  // k27 KC_J
+    {0, C3_9},  // k70 KC_K
+    {0, C3_10}, // k71 KC_L
+    {0, C3_11}, // k72 KC_SCLN
+    {0, C3_12}, // k73 KC_QUOT
+    {0, C3_14}, // k75 KC_ENT
+    {0, C4_1},  // k30 KC_LSFT
+    {0, C4_3},  // k32 KC_Z
+    {0, C4_4},  // k33 KC_X
+    {0, C4_5},  // k34 KC_C
+    {0, C4_6},  // k35 KC_V
+    {0, C4_7},  // k36 KC_B
+    {0, C4_8},  // k37 KC_N
+    {0, C4_9},  // k80 KC_M
+    {0, C4_10}, // k81 KC_COMM
+    {0, C4_11}, // k82 KC_DOT
+    {0, C4_12}, // k83 KC_SLSH
+    {0, C4_13}, // k85 KC_RSFT
+    {0, C4_14}, // k86 KC_UP
+    {0, C5_1},  // k40 KC_LCTL
+    {0, C5_2},  // k41 KC_LGUI
+    {0, C5_3},  // k42 KC_LALT
+    {0, C5_4},  // Unassociated between LALT and SPACE_2.75
+    {0, C5_5},  // k45 KC_SPC SPACE_2.75
+    {0, C5_6},  // k45 KC_SPC SPACE_6.75
+    {0, C5_7},  // k46 KC_SPC SPACE_2.25
+    {0, C5_8},  // Unassociated between SPACE_2.25 and SPACE_1.25
+    {0, C5_9},  // k90 KC_RGUI
+    {0, C5_10}, // k92 KC_RALT
+    {0, C5_11}, // k93 MO(_FL)
+    {0, C5_12}, // k94 KC_RCTL
+    {0, C5_13}, // k95 KC_LEFT
+    {0, C5_14}, // k96 KC_DOWN
+    {0, C5_15}  // k97 KC_RGHT
+};
 
-    // Set our LED pins low
-    PORTD &= ~(1<<0); // Esc
-    PORTD &= ~(1<<4); // Page Up
-    PORTD &= ~(1<<1); // Arrows
-}
+const led_matrix g_leds[LED_DRIVER_LED_COUNT] = {
 
-void backlight_set(uint8_t level) {
-    if ( level == 0 ) {
-        // Turn off light
-        PORTD |= (1<<0); // Esc
-        PORTD |= (1<<4); // Page Up
-        PORTD |= (1<<1); // Arrows
-    } else {
-        // Turn on light
-        PORTD &= ~(1<<0); // Esc
-        PORTD &= ~(1<<4); // Page Up
-        PORTD &= ~(1<<1); // Arrows
-    }
-}
+    /*{row | col << 4}
+      |            LED_ROW_COL(row, col)
+      |             |            modifier
+      |             |            | */
+    {{0|(1<<4)},   {0, 0}, 1},           // k00  KC_GESC
+    {{0|(2<<4)},   {14.45, 0}, 0},       // k01 KC_1
+    {{0|(3<<4)},   {28.9, 0}, 0},        // k02 KC_2
+    {{0|(4<<4)},   {43.35, 0}, 0},       // k03 KC_3
+    {{0|(5<<4)},   {57.8, 0}, 0},        // k04 KC_4
+    {{0|(6<<4)},   {72.25, 0}, 0},       // k05 KC_5
+    {{0|(7<<4)},   {86.7, 0}, 0},        // k06 KC_6
+    {{0|(8<<4)},   {101.2, 0}, 0},       // k07 KC_7
+    {{0|(9<<4)},   {115.6, 0}, 0},       // k50 KC_8
+    {{0|(10<<4)},  {130, 0}, 0},         // k51 KC_9
+    {{0|(11<<4)},  {144.5, 0}, 0},       // k52 KC_0
+    {{0|(12<<4)},  {159, 0}, 0},         // k53 KC_MINS
+    {{0|(13<<4)},  {173.4, 0}, 0},       // k54 KC_EQL
+    {{0|(14<<4)},  {195.1, 0}, 1},       // k55 KC_BSPC
+    {{0|(15<<4)},  {224, 0}, 1},         // k57 KC_PGUP
 
-void led_init_ports() {
-    // * Set our LED pins as output
-    DDRB |= (1<<4);
-}
+    {{1|(0<<4)},   {3.6125, 16}, 1},     // k10 KC_TAB
+    {{1|(1<<4)},   {21.675, 16}, 0},     // k11 KC_Q
+    {{1|(2<<4)},   {36.125, 16}, 0},     // k12 KC_W
+    {{1|(3<<4)},   {50.575, 16}, 0},     // k13 KC_E
+    {{1|(4<<4)},   {65.025, 16}, 0},     // k14 KC_R
+    {{1|(5<<4)},   {79.475, 16}, 0},     // k15 KC_T
+    {{1|(6<<4)},   {93.925, 16}, 0},     // k16 KC_Y
+    {{1|(7<<4)},   {108.375, 16}, 0},    // k17 KC_U
+    {{1|(8<<4)},   {122.825, 16}, 0},    // k60 KC_I
+    {{1|(9<<4)},   {137.275, 16}, 0},    // k61 KC_O
+    {{1|(10<<4)},  {151.725, 16}, 0},    // k62 KC_P
+    {{1|(11<<4)},  {166.175, 16}, 0},    // k63 KC_LBRC
+    {{1|(12<<4)},  {180.625, 16}, 0},    // k64 KC_RBRC
+    {{1|(13<<4)},  {198.6875, 16}, 1},   // k65 KC_BSLS
+    {{1|(14<<4)},  {224, 16}, 1},        // k67 KC_PGDN
 
-void led_set_kb(uint8_t usb_led) {
-    DDRB |= (1<<4);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB |= (1<<4);
-    } else {
-        // Turn capslock off
-        PORTB &= ~(1<<4);
-    }
-}
+    {{2|(0<<4)},   {5.41875, 32}, 1},    // k20 KC_CAPS
+    {{2|(1<<4)},   {25.2875, 32}, 0},    // k21 KC_A
+    {{2|(2<<4)},   {39.7375, 32}, 0},    // k22 KC_S
+    {{2|(3<<4)},   {54.1875, 32}, 0},    // k23 KC_D
+    {{2|(4<<4)},   {68.6375, 32}, 0},    // k24 KC_F
+    {{2|(5<<4)},   {83.0875, 32}, 0},    // k25 KC_G
+    {{2|(6<<4)},   {97.5375, 32}, 0},    // k26 KC_H
+    {{2|(7<<4)},   {111.9875, 32}, 0},   // k27 KC_J
+    {{2|(8<<4)},   {126.4375, 32}, 0},   // k70 KC_K
+    {{2|(9<<4)},   {140.8875, 32}, 0},   // k71 KC_L
+    {{2|(10<<4)},  {155.3375, 32}, 0},   // k72 KC_SCLN
+    {{2|(11<<4)},  {169.7875, 32}, 0},   // k73 KC_QUOT
+    {{2|(12<<4)},  {184.2375, 32}, 1},   // k75 KC_ENT
+
+    {{3|(0<<4)},   {16.25625, 48}, 1},   // k30 KC_LSFT
+    {{3|(1<<4)},   {32.5125, 48}, 0},    // k32 KC_Z
+    {{3|(2<<4)},   {46.9625, 48}, 0},    // k33 KC_X
+    {{3|(3<<4)},   {61.4125, 48}, 0},    // k34 KC_C
+    {{3|(4<<4)},   {75.8625, 48}, 0},    // k35 KC_V
+    {{3|(5<<4)},   {90.3125, 48}, 0},    // k36 KC_B
+    {{3|(6<<4)},   {104.7625, 48}, 0},   // k37 KC_N
+    {{3|(7<<4)},   {119.2125, 48}, 0},   // k80 KC_M
+    {{3|(8<<4)},   {133.6625, 48}, 0},   // k81 KC_COMM
+    {{3|(9<<4)},   {148.1125, 48}, 0},   // k82 KC_DOT
+    {{3|(10<<4)},  {162.5625, 48}, 0},   // k83 KC_SLSH
+    {{3|(11<<4)},  {187.85, 48}, 1},     // k85 KC_RSFT
+    {{3|(12<<4)},  {209.525, 48}, 1},    // k86 KC_UP
+
+    {{4|(0<<4)},   {9.03125, 64}, 1},    // k40 KC_LCTL
+    {{4|(1<<4)},   {27.09375, 64}, 1},   // k41 KC_LGUI
+    {{4|(2<<4)},   {45.15625, 64}, 1},   // k42 KC_LALT
+    {{4|(3<<4)},   {59.45, 64}, 1},      // Unassociated between LALT and SPACE_2.75
+    {{4|(4<<4)},   {73.9, 64}, 1},       // k45 KC_SPC SPACE_2.75
+    {{4|(5<<4)},   {88.35, 64}, 1},      // k45 KC_SPC SPACE_6.25
+    {{4|(6<<4)},   {102.8, 64}, 1},      // k46 KC_SPC SPACE_2.25
+    {{4|(7<<4)},   {117.40625, 64}, 1},  // Unassociated between SPACE_2.25 and SPACE_2.75
+    {{4|(8<<4)},   {135.46875, 64}, 1},  // k90 KC_RGUI
+    {{4|(9<<4)},   {153.53125, 64}, 1},  // k92 KC_RALT
+    {{4|(10<<4)},  {167.98125, 64}, 1},  // k93 MO(_FL)
+    {{4|(11<<4)},  {186.04375, 64}, 1},  // k94 KC_RCTL
+    {{4|(12<<4)},  {195.075, 64}, 1},    // k95 KC_LEFT
+    {{4|(13<<4)},  {209.525, 64}, 1},    // k96 KC_DOWN
+    {{4|(14<<4)},  {224, 64}, 1}         // k97 KC_RGHT
+};
+#endif

keyboards/clueboard/66_hotswap/gen1/gen1.h

@@ -1,67 +1,89 @@
+/* Copyright 2017 Clueboard <info@clueboard.co>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #pragma once
 #include "quantum.h"
 
+/*
+ * These are shortcuts to help you work with the various layout options. If your 
+ * keymap works with one of the LAYOUT_...() macros you are encouraged to use that
+ * and to contribute your keymap to the corresponding layout in 
+ * `qmk_firmware/layouts/community`.
+ */
+
 /* Clueboard matrix layout
  * ,-----------------------------------------------------------.  ,---.
- * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54|     56|  | 57|
+ * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54|   56  |  | 57|
  * |-----------------------------------------------------------|  |---|
  * |   10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64|   65|  | 67|
  * |-----------------------------------------------------------|  `---'
  * |    20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73|      75|
- * |-------------------------------------------------------------.
- * |      30| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83|      85| 86|
- * |-----------------------------------------------------------------.
- * |  40|  41|  42|        45|      46|  90|  92| 93|  94| 95| 96| 97|
- * `-----------------------------------------------------------------'
+ * |--------------------------------------------------------------.
+ * |  30    | 32| 33| 34| 35| 36| 37| 80| 81| 82| 83|      85  |86|
+ * |------------------------------------------------------------------.
+ * |  40| 41|  42|        45|       46|   90|  92|  93|  94| 95|96| 97|
+ * `------------------------------------------------------------------'
  * ,-----------------------------------------------------------.  ,---.
  * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |  |Ins|
  * |-----------------------------------------------------------|  |---|
  * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|  |Del|
  * |-----------------------------------------------------------|  `---'
  * |Caps  |  A|  S|  D|  F|  G|  H|  J|  k|  L|  ;|  '|Enter   |
- * |-------------------------------------------------------------.
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift   |Up |
- * |-----------------------------------------------------------------.
- * |Ctrl|Alt |Gui |     Space|   Space|Gui |Alt |Fn |Ctrl|Lft|Dwn|Rgt|
- * `-----------------------------------------------------------------'
+ * |--------------------------------------------------------------.
+ * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|    Shift| Up|
+ * |------------------------------------------------------------------.
+ * |Ctrl|Alt|Gui |     Space|  Space|Gui |Alt |Fn  |Ctrl|Left|Down|Rgt|
+ * `------------------------------------------------------------------'
  */
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
 
 #define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k56,   k57, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64,    k65,   k67, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73,         k75,        \
-    k30,      k32, k33, k34, k35, k36, k37, k80, k81, k82, k83,      k85, k86,      \
-    k40, k41, k42,           k45, k46,      k90,      k92, k93, k94, k95, k96, k97  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k55,   k57, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73,    k75, \
+    k30,      k32, k33, k34, k35, k36, k37, k80, k81, k82, k83,      k85, k86, \
+    k40, k41, k42,           k45, k46,      k90,      k92, k93, k94, k95, k96, k97 \
 ) { \
-    { k00,    k01,    k02,    k03,    k04,    k05,    k06,    k07   }, \
-    { k10,    k11,    k12,    k13,    k14,    k15,    k16,    k17   }, \
-    { k20,    k21,    k22,    k23,    k24,    k25,    k26,    k27   }, \
-    { k30,    KC_NO,  k32,    k33,    k34,    k35,    k36,    k37   }, \
-    { k40,    k41,    k42,    KC_NO,  KC_NO,  k45,    k46,    KC_NO }, \
-    { k50,    k51,    k52,    k53,    k54,    KC_NO,  k56,    k57   }, \
-    { k60,    k61,    k62,    k63,    k64,    k65,    KC_NO,  k67   }, \
-    { k70,    k71,    k72,    k73,    KC_NO,  k75,    KC_NO,  KC_NO }, \
-    { k80,    k81,    k82,    k83,    KC_NO,  k85,    k86,    KC_NO }, \
-    { k90,    KC_NO,  k92,    k93,    k94,    k95,    k96,    k97   }  \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+    { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \
+    { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \
+    { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
+    { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
+    { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
+    { k90, KC_NO, k92, k93, k94, k95, k96, k97 }  \
 }
 
 #define LAYOUT_66_ansi( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k56,   k57, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64,    k65,   k67, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73,         k75,        \
-    k30,      k32, k33, k34, k35, k36, k37, k80, k81, k82, k83,      k85, k86,      \
-    k40, k41, k42,                k46,                k92, k93, k94, k95, k96, k97  \
+    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k55,   k57, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73,    k75, \
+    k30,      k32, k33, k34, k35, k36, k37, k80, k81, k82, k83,    k85,   k86, \
+    k40, k41, k42,                k46,                k92, k93, k94, k95, k96, k97 \
 ) { \
-    { k00,    k01,    k02,    k03,    k04,    k05,    k06,    k07   }, \
-    { k10,    k11,    k12,    k13,    k14,    k15,    k16,    k17   }, \
-    { k20,    k21,    k22,    k23,    k24,    k25,    k26,    k27   }, \
-    { k30,    KC_NO,  k32,    k33,    k34,    k35,    k36,    k37   }, \
-    { k40,    k41,    k42,    KC_NO,  KC_NO,  KC_NO,  k46,    KC_NO }, \
-    { k50,    k51,    k52,    k53,    k54,    KC_NO,  k56,    k57   }, \
-    { k60,    k61,    k62,    k63,    k64,    k65,    KC_NO,  k67   }, \
-    { k70,    k71,    k72,    k73,    KC_NO,  k75,    KC_NO,  KC_NO }, \
-    { k80,    k81,    k82,    k83,    KC_NO,  k85,    k86,    KC_NO }, \
-    { KC_NO,  KC_NO,  k92,    k93,    k94,    k95,    k96,    k97   }  \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+    { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \
+    { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \
+    { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
+    { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
+    { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
+    { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 }  \
 }

keyboards/clueboard/66_hotswap/gen1/halconf.h

@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/clueboard/66_hotswap/gen1/info.json

@@ -0,0 +1,11 @@
+{
+  "layouts": {
+    "LAYOUT": {
+      "layout": [{"x": 0, "y": 0, "w": 1, "label": "GRAVE"}, {"x": 1, "y": 0, "w": 1, "label": "1"}, {"x": 2, "y": 0, "w": 1, "label": "2"}, {"x": 3, "y": 0, "w": 1, "label": "3"}, {"x": 4, "y": 0, "w": 1, "label": "4"}, {"x": 5, "y": 0, "w": 1, "label": "5"}, {"x": 6, "y": 0, "w": 1, "label": "6"}, {"x": 7, "y": 0, "w": 1, "label": "7"}, {"x": 8, "y": 0, "w": 1, "label": "8"}, {"x": 9, "y": 0, "w": 1, "label": "9"}, {"x": 10, "y": 0, "w": 1, "label": "0"}, {"x": 11, "y": 0, "w": 1, "label": "DASH"}, {"x": 12, "y": 0, "w": 1, "label": "EQUALSIGN"}, {"x": 13, "y": 0, "w": 1, "label": "YEN"}, {"x": 14, "y": 0, "w": 1, "label": "BACKSPACE"}, {"x": 15.5, "y": 0, "w": 1, "label": "PAGEUP"}, {"x": 0, "y": 1, "w": 1.5, "label": "TAB"}, {"x": 1.5, "y": 1, "w": 1, "label": "Q"}, {"x": 2.5, "y": 1, "w": 1, "label": "W"}, {"x": 3.5, "y": 1, "w": 1, "label": "E"}, {"x": 4.5, "y": 1, "w": 1, "label": "R"}, {"x": 5.5, "y": 1, "w": 1, "label": "T"}, {"x": 6.5, "y": 1, "w": 1, "label": "Y"}, {"x": 7.5, "y": 1, "w": 1, "label": "U"}, {"x": 8.5, "y": 1, "w": 1, "label": "I"}, {"x": 9.5, "y": 1, "w": 1, "label": "O"}, {"x": 10.5, "y": 1, "w": 1, "label": "P"}, {"x": 11.5, "y": 1, "w": 1, "label": "LBRACKET"}, {"x": 12.5, "y": 1, "w": 1, "label": "RBRACKET"}, {"x": 13.5, "y": 1, "w": 1.5, "label": "BACKSLASH"}, {"x": 15.5, "y": 1, "w": 1, "label": "PAGEDOWN"}, {"x": 0, "y": 2, "w": 1.75, "label": "CAPSLOCK"}, {"x": 1.75, "y": 2, "w": 1, "label": "A"}, {"x": 2.75, "y": 2, "w": 1, "label": "S"}, {"x": 3.75, "y": 2, "w": 1, "label": "D"}, {"x": 4.75, "y": 2, "w": 1, "label": "F"}, {"x": 5.75, "y": 2, "w": 1, "label": "G"}, {"x": 6.75, "y": 2, "w": 1, "label": "H"}, {"x": 7.75, "y": 2, "w": 1, "label": "J"}, {"x": 8.75, "y": 2, "w": 1, "label": "K"}, {"x": 9.75, "y": 2, "w": 1, "label": "L"}, {"x": 10.75, "y": 2, "w": 1, "label": "SEMICOLON"}, {"x": 11.75, "y": 2, "w": 1, "label": "QUOTE"}, {"x": 13.75, "y": 2, "w": 1.25, "label": "ENTER"}, {"x": 0, "y": 3, "w": 1.25, "label": "LSHIFT"}, {"x": 2.25, "y": 3, "w": 1, "label": "Z"}, {"x": 3.25, "y": 3, "w": 1, "label": "X"}, {"x": 4.25, "y": 3, "w": 1, "label": "C"}, {"x": 5.25, "y": 3, "w": 1, "label": "V"}, {"x": 6.25, "y": 3, "w": 1, "label": "B"}, {"x": 7.25, "y": 3, "w": 1, "label": "N"}, {"x": 8.25, "y": 3, "w": 1, "label": "M"}, {"x": 9.25, "y": 3, "w": 1, "label": "COMMA"}, {"x": 10.25, "y": 3, "w": 1, "label": "PERIOD"}, {"x": 11.25, "y": 3, "w": 1, "label": "SLASH"}, {"x": 13.25, "y": 3, "w": 1.25, "label": "RSHIFT"}, {"x": 14.5, "y": 3, "w": 1, "label": "UP"}, {"x": 0, "y": 4, "w": 1.25, "label": "LCTRL"}, {"x": 1.25, "y": 4, "w": 1, "label": "LALT"}, {"x": 2.25, "y": 4, "w": 1.25, "label": "LCMD"}, {"x": 3.5, "y": 4, "w": 1.25, "label": "MUHENKAN"}, {"x": 4.75, "y": 4, "w": 2, "label": "SPACE1"}, {"x": 6.75, "y": 4, "w": 2, "label": "SPACE2"}, {"x": 8.75, "y": 4, "w": 1.25, "label": "HENKAN"}, {"x": 10, "y": 4, "w": 1.25, "label": "RCMD"}, {"x": 11.25, "y": 4, "w": 1, "label": "RCTRL"}, {"x": 12.25, "y": 4, "w": 1.25, "label": "FN"}, {"x": 13.5, "y": 4, "w": 1, "label": "LEFT"}, {"x": 14.5, "y": 4, "w": 1, "label": "DOWN"}, {"x": 15.5, "y": 4, "w": 1, "label": "RIGHT"}]
+    },
+
+    "LAYOUT_66_ansi": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"x":14.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}]
+    }
+  }
+}

keyboards/clueboard/66_hotswap/gen1/led.c

@@ -0,0 +1,21 @@
+/*
+ * Copyright 2017 skully <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+#include "backlight.h"
+#include "led.h"
+#include "printf.h"

keyboards/clueboard/66_hotswap/gen1/matrix.c

@@ -0,0 +1,160 @@
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "printf.h"
+#include "backlight.h"
+#include "matrix.h"
+#include "action.h"
+#include "keycode.h"
+#include <string.h>
+
+/*
+ * #define MATRIX_ROW_PINS { PB11, PA6, PA3, PA2, PA1, PB5, PB6, PC15, PC14, PC13 }
+ * #define MATRIX_COL_PINS { PB10, PB2, PB1, PB0, PA7, PB4, PB3, PB7 }
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_COLS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+  matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+  matrix_scan_user();
+}
+
+void matrix_init(void) {
+    printf("matrix init\n");
+    //debug_matrix = true;
+
+    // actual matrix setup
+    palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 1,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOA, 7,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 4,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 3,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 7,  PAL_MODE_OUTPUT_PUSHPULL);
+
+    palSetPadMode(GPIOB, 11, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 6,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 3,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 1, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOB, 5, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOB, 6, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOC, 15,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOC, 14,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOC, 13,  PAL_MODE_INPUT_PULLDOWN);
+
+    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t));
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+    // actual matrix
+    for (int col = 0; col < MATRIX_COLS; col++) {
+        matrix_row_t data = 0;
+
+        // strobe col { PB10, PB2, PB1, PB0, PA7, PB4, PB3, PB7 }
+        switch (col) {
+            case 0: palSetPad(GPIOB, 10); break;
+            case 1: palSetPad(GPIOB, 2); break;
+            case 2: palSetPad(GPIOB, 1); break;
+            case 3: palSetPad(GPIOB, 0); break;
+            case 4: palSetPad(GPIOA, 7); break;
+            case 5: palSetPad(GPIOB, 4); break;
+            case 6: palSetPad(GPIOB, 3); break;
+            case 7: palSetPad(GPIOB, 7); break;
+        }
+
+        // need wait to settle pin state
+        wait_us(20);
+
+        // read row data { PB11, PA6, PA3, PA2, PA1, PB5, PB6, PC15, PC14, PC13 }
+        data = (
+            (palReadPad(GPIOB, 11) << 0 ) |
+            (palReadPad(GPIOA, 6)  << 1 ) |
+            (palReadPad(GPIOA, 3)  << 2 ) |
+            (palReadPad(GPIOA, 2) << 3 ) |
+            (palReadPad(GPIOA, 1) << 4 ) |
+            (palReadPad(GPIOB, 5) << 5 ) |
+            (palReadPad(GPIOB, 6) << 6 ) |
+            (palReadPad(GPIOC, 15)  << 7 ) |
+            (palReadPad(GPIOC, 14)  << 8 ) |
+            (palReadPad(GPIOC, 13)  << 9 )
+        );
+
+        // unstrobe  col { B11, B10, B2, B1, A7, B0 }
+        switch (col) {
+            case 0: palClearPad(GPIOB, 10); break;
+            case 1: palClearPad(GPIOB, 2); break;
+            case 2: palClearPad(GPIOB, 1); break;
+            case 3: palClearPad(GPIOB, 0); break;
+            case 4: palClearPad(GPIOA, 7); break;
+            case 5: palClearPad(GPIOB, 4); break;
+            case 6: palClearPad(GPIOB, 3); break;
+            case 7: palClearPad(GPIOB, 7); break;
+        }
+
+        if (matrix_debouncing[col] != data) {
+            matrix_debouncing[col] = data;
+            debouncing = true;
+            debouncing_time = timer_read();
+        }
+    }
+
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            matrix[row] = 0;
+            for (int col = 0; col < MATRIX_COLS; col++) {
+                matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col);
+            }
+        }
+        debouncing = false;
+    }
+
+    matrix_scan_quantum();
+
+    return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col) {
+    return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint16_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+    printf("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        printf("%X0: ", row);
+        matrix_row_t data = matrix_get_row(row);
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (data & (1<<col))
+                printf("1");
+            else
+                printf("0");
+        }
+        printf("\n");
+    }
+}

keyboards/clueboard/66_hotswap/gen1/mcuconf.h

@@ -0,0 +1,257 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  TRUE
+#define STM32_GPT_USE_TIM7                  TRUE
+#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */

keyboards/clueboard/66_hotswap/gen1/rules.mk

@@ -1,24 +1,58 @@
-EXTRAFLAGS += -flto
-LAYOUTS = 66_ansi
-MCU = atmega32u4
-F_CPU = 16000000
-ARCH = AVR8
-F_USB = $(F_CPU)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# project specific files
+SRC =	led.c
+LAYOUTS += 66_ansi
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+# LED Configuration
+LED_MATRIX_ENABLE = IS31FL3731
 
 # Build Options
 #   comment out to disable the options.
 #
 BACKLIGHT_ENABLE = yes
-BOOTMAGIC_ENABLE = no
-MOUSEKEY_ENABLE = no
-EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes
-COMMAND_ENABLE = no
-NKRO_ENABLE = yes
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+#CUSTOM_MATRIX = yes # Custom matrix file
 AUDIO_ENABLE = yes
-RGBLIGHT_ENABLE = yes
-MIDI_ENABLE = no
-UNICODE_ENABLE = no
-BLUETOOTH_ENABLE = no
+# SERIAL_LINK_ENABLE = yes

keyboards/clueboard/66_hotswap/keymaps/default/keymap.c

@@ -6,6 +6,30 @@
 #define _FL 1
 #define _CL 2
 
+enum custom_keycodes {
+    S_BSKTC = SAFE_RANGE,
+    S_ODEJY,
+    S_RCKBY,
+    S_DOEDR,
+    S_SCALE,
+    S_ONEUP,
+    S_COIN,
+    S_SONIC,
+    S_ZELDA
+};
+
+#ifdef AUDIO_ENABLE
+  float song_basketcase[][2] = SONG(BASKET_CASE);
+  float song_ode_to_joy[][2]  = SONG(ODE_TO_JOY);
+  float song_rock_a_bye_baby[][2]  = SONG(ROCK_A_BYE_BABY);
+  float song_doe_a_deer[][2]  = SONG(DOE_A_DEER);
+  float song_scale[][2]  = SONG(MUSIC_SCALE_SOUND);
+  float song_coin[][2]  = SONG(COIN_SOUND);
+  float song_one_up[][2]  = SONG(ONE_UP_SOUND);
+  float song_sonic_ring[][2]  = SONG(SONIC_RING);
+  float song_zelda_puzzle[][2]  = SONG(ZELDA_PUZZLE);
+#endif
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _BL: Base Layer (Default Layer)
    */
@@ -28,9 +52,72 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _CL: Control layer
    */
 [_CL] = LAYOUT(
-  BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______,   RGB_TOG,           RGB_VAI, \
-  _______,_______,_______,_______,RESET,  _______,_______,_______,_______,_______,_______,_______,_______,_______,                RGB_VAD, \
+  BL_STEP,S_ONEUP,S_SCALE,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______,   BL_TOGG,           BL_INC, \
+  _______,_______,_______,_______,RESET,  _______,_______,_______,_______,_______,_______,_______,_______,_______,                BL_DEC, \
   _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,    _______,                             \
   _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        RGB_SAI,         \
-  _______,_______,_______,                RGB_MOD,RGB_MOD,                        _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI),
+  _______,_______,_______,                BL_BRTG,BL_BRTG,                        _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI),
 };
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        #ifdef AUDIO_ENABLE
+            case S_BSKTC:
+                if (record->event.pressed) {
+                    stop_all_notes();
+                    PLAY_SONG(song_basketcase);
+                }
+                return false;
+            case S_ODEJY:
+                if (record->event.pressed) {
+                    stop_all_notes();
+                    PLAY_SONG(song_ode_to_joy);
+                }
+                return false;
+            case S_RCKBY:
+                if (record->event.pressed) {
+                    stop_all_notes();
+                    PLAY_SONG(song_rock_a_bye_baby);
+                }
+                return false;
+            case S_DOEDR:
+                if (record->event.pressed) {
+                    stop_all_notes();
+                    PLAY_SONG(song_doe_a_deer);
+                }
+                return false;
+            case S_SCALE:
+                if (record->event.pressed) {
+                    stop_all_notes();
+                    PLAY_SONG(song_scale);
+                }
+                return false;
+            case S_ONEUP:
+                if (record->event.pressed) {
+                    stop_all_notes();
+                    PLAY_SONG(song_one_up);
+                }
+                return false;
+            case S_COIN:
+                if (record->event.pressed) {
+                    stop_all_notes();
+                    PLAY_SONG(song_coin);
+                }
+                return false;
+            case S_SONIC:
+                if (record->event.pressed) {
+                    stop_all_notes();
+                    PLAY_SONG(song_sonic_ring);
+                }
+                return false;
+            case S_ZELDA:
+                if (record->event.pressed) {
+                    stop_all_notes();
+                    PLAY_SONG(song_zelda_puzzle);
+                }
+                return false;
+        #endif
+    }
+    return true;
+}

keyboards/clueboard/66_hotswap/prototype/config.h

@@ -0,0 +1,55 @@
+#pragma once
+#include "config_common.h"
+
+#define PRODUCT_ID      0x2390
+#define DEVICE_VER      0x0001
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+* row: 0  1  2  3  4  5  6  7  8  9
+* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2
+*/
+
+#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 }
+/* Column pin configuration
+ * col: 0  1  2  3  4  5  6  7
+ * pin: F0 F1 F4 F5 F6 F7 E6 B1
+ */
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 }
+#define UNUSED_PINS
+
+/* Speaker configuration
+ */
+#define B7_AUDIO
+#define NO_MUSIC_MODE
+#define AUDIO_CLICKY
+
+/* Space savings
+ */
+#define NO_ACTION_TAPPING
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 1
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN D7
+#define RGBLED_NUM 26     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 32
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_EFFECT_BREATHE_CENTER 1
+#define RGBLIGHT_EFFECT_BREATHE_MAX 200
+#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2
+#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
+#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 4   // How many LEDs wide to light up
+#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 16   // The led to start at
+#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8  // How many LEDs to travel
+#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4    // How many LEDs wide to light up

keyboards/clueboard/66_hotswap/prototype/prototype.c

@@ -0,0 +1,63 @@
+#include "prototype.h"
+#include <avr/io.h>
+#include "backlight.h"
+#include "print.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+}
+
+
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+void backlight_init_ports(void) {
+    print("init_backlight_pin()\n");
+    // Set our LED pins as output
+    DDRD |= (1<<0); // Esc
+    DDRD |= (1<<4); // Page Up
+    DDRD |= (1<<1); // Arrows
+
+    // Set our LED pins low
+    PORTD &= ~(1<<0); // Esc
+    PORTD &= ~(1<<4); // Page Up
+    PORTD &= ~(1<<1); // Arrows
+}
+
+void backlight_set(uint8_t level) {
+    if ( level == 0 ) {
+        // Turn off light
+        PORTD |= (1<<0); // Esc
+        PORTD |= (1<<4); // Page Up
+        PORTD |= (1<<1); // Arrows
+    } else {
+        // Turn on light
+        PORTD &= ~(1<<0); // Esc
+        PORTD &= ~(1<<4); // Page Up
+        PORTD &= ~(1<<1); // Arrows
+    }
+}
+
+void led_init_ports() {
+    // * Set our LED pins as output
+    DDRB |= (1<<4);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    DDRB |= (1<<4);
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB |= (1<<4);
+    } else {
+        // Turn capslock off
+        PORTB &= ~(1<<4);
+    }
+}

keyboards/clueboard/66_hotswap/prototype/prototype.h

@@ -0,0 +1,86 @@
+#pragma once
+#include "quantum.h"
+
+/* Clueboard matrix layout
+ * ,-----------------------------------------------------------.  ,---.
+ * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54|   56  |  | 57|
+ * |-----------------------------------------------------------|  |---|
+ * |   10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64|   65|  | 67|
+ * |-----------------------------------------------------------|  `---'
+ * |    20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74|  75|
+ * |------------------------------------------------------------.
+ * |  30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84|  85|86|
+ * |------------------------------------------------------------------.
+ * |  40| 41|  42|  43|   45|       46|   90|  92|  93| 94| 95| 96| 97|
+ * `------------------------------------------------------------------'
+ * ,-----------------------------------------------------------.  ,---.
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |  |Ins|
+ * |-----------------------------------------------------------|  |---|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|  |Del|
+ * |-----------------------------------------------------------|  `---'
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  k|  L|  ;|  '|Enter   |
+ * |--------------------------------------------------------------.
+ * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  \|Shift| Up|
+ * |------------------------------------------------------------------.
+ * |Ctrl|Alt|Gui |     Space|  Space|Gui |Alt |Fn  |Ctrl|Left|Down|Rgt|
+ * `------------------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_all( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k56,   k57, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73,    k75, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \
+    k40, k41, k42,           k45, k46,      k90,      k92, k93, k94, k95, k96, k97 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \
+    { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \
+    { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
+    { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
+    { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \
+    { k90, KC_NO, k92, k93, k94, k95, k96, k97 }  \
+}
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k56,   k57, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73,    k75, \
+    k30,      k32, k33, k34, k35, k36, k37, k80, k81, k82, k83,      k85, k86, \
+    k40, k41, k42,           k45, k46,      k90,      k92, k93, k94, k95, k96, k97 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+    { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \
+    { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \
+    { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
+    { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
+    { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
+    { k90, KC_NO, k92, k93, k94, k95, k96, k97 }  \
+}
+
+#define LAYOUT_66_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k56,   k57, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73,    k75, \
+    k30,      k32, k33, k34, k35, k36, k37, k80, k81, k82, k83,    k85,   k86, \
+    k40, k41, k42,                k46,                k92, k93, k94, k95, k96, k97 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+    { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \
+    { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \
+    { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
+    { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
+    { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
+    { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 }  \
+}

keyboards/clueboard/66_hotswap/prototype/rules.mk

@@ -0,0 +1,24 @@
+EXTRAFLAGS += -flto
+LAYOUTS = 66_ansi
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = yes
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = no
+NKRO_ENABLE = yes
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no
+UNICODE_ENABLE = no
+BLUETOOTH_ENABLE = no

keyboards/converter/numeric_keypad_IIe/config.h

@@ -0,0 +1,101 @@
+/*
+Copyright 2019 Adam Newbold <adam@neatnik.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Apple Inc.
+#define PRODUCT         Numeric Keypad IIe
+#define DESCRIPTION     "Numeric Keypad IIe, A2M2003"
+
+/*
+
+Pin Mappings
+============
+
+Dsub-15 Connection
+------------------
+
+          Dsub-15 (female)
+    ,-------------------------.
+    \ 08 07 06 05 04 03 02 01 /
+     \ 15 14 13 12 11 10 09  /
+      `---------------------'
+
+Header Pins
+-----------
+ _____________________________________
+|                                     |
+|  11  10  9  8  7  6  5  4  3  2  1  |
+|_____________________________________|
+
+
+Header / Matrix
+---------------
+
+Pin             Name        Description                                
+--------------------------------------------------------------
+1,2,5,3,4,6     Y0-Y5       Y-direction key-matrix connections
+7               NC                                          
+9,11,10,8       X4-X7       X-direction key-matrix connections
+
+
+Microcontroller Configuration
+-----------------------------
+
+(Pins are for an Arduino Micro)
+
++-----------------------------------+
+| Dsub-15 | Header | Matrix | Micro |
+|---------+--------+--------+-------|
+|   12    |   11   |   X5   |   B0  |
+|   11    |   10   |   X6   |   D3  |
+|   10    |    9   |   X4   |   B2  |
+|    9    |    8   |   X7   |   D2  |
+|   NC    |    7   |   NC   |   --  |
+|    7    |    6   |   Y5   |   E6  |
+|    6    |    5   |   Y2   |   D4  |
+|    5    |    4   |   Y4   |   D7  |
+|    3    |    3   |   Y3   |   C6  |
+|    2    |    2   |   Y1   |   D0  |
+|    1    |    1   |   Y0   |   D1  |
++-----------------------------------+
+
+Note: Dsub-15 pins 4, 8, 13, 14, and 15 are unused
+
+Reference
+---------
+
+https://deskthority.net/wiki/Apple_Numeric_Keypad_IIe
+https://geekhack.org/index.php?topic=78048.0
+http://wiki.apple2.org/index.php?title=Pinouts#Apple_.2F.2Fe_Numeric_Keypad_connector
+
+*/
+
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 6
+#define MATRIX_ROW_PINS { B0, B2, D2, D3 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6 }
+#define UNUSED_PINS
+#define DIODE_DIRECTION COL2ROW
+#define SOFT_SERIAL_PIN D0
+#define DEBOUNCING_DELAY 5