Update build instructions and Dockerfile to download submodules

* Initial commit of RAMA KOYU

* Changed default layout

* removed IS_COMMAND()

Dockerfile

@@ -26,4 +26,4 @@ VOLUME /qmk_firmware
 WORKDIR /qmk_firmware
 COPY . .
 
-CMD make $KEYBOARD:$KEYMAP
+CMD make clean ; make git-submodule ; make $KEYBOARD:$KEYMAP

docs/_summary.md

@@ -3,7 +3,7 @@
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
-  * [Best Practices](newbs_best_practices.md)
+  * [Git Best Practices](newbs_best_practices.md)
   * [Learning Resources](newbs_learn_more_resources.md)
 
 * [QMK Basics](README.md)

docs/config_options.md

@@ -171,11 +171,15 @@ If you define these options you will enable the associated feature, which may in
 ## RGB Light Configuration
 
 * `#define RGB_DI_PIN D7`
-  * pin the DI on the ws2812 is hooked-up to
+  * pin the DI on the WS2812 is hooked-up to
 * `#define RGBLIGHT_ANIMATIONS`
   * run RGB animations
-* `#define RGBLED_NUM 15`
+* `#define RGBLED_NUM 12`
   * number of LEDs
+* `#define RGBLED_SPLIT { 6, 6 }`
+  * number of LEDs connected that are directly wired to `RGB_DI_PIN` on each half of a split keyboard
+  * First value indicates number of LEDs for left half, second value is for the right half
+  * Needed if both halves of the board have RGB LEDs wired directly to the RGB output pin on the controllers instead of passing the output of the left half to the input of the right half
 * `#define RGBLIGHT_HUE_STEP 12`
   * units to step when in/decreasing hue
 * `#define RGBLIGHT_SAT_STEP 25`
@@ -236,6 +240,9 @@ There are a few different ways to set handedness for split keyboards (listed in
 * `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
   * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.
 
+* `#define RGBLED_SPLIT { 6, 6 }`
+  * See [RGB Light Configuration](#rgb-light-configuration)
+
 * `#define SELECT_SOFT_SERIAL_SPEED <speed>` (default speed is 1)
   * Sets the protocol speed when using serial communication
   * Speeds:

docs/custom_quantum_functions.md

@@ -116,29 +116,29 @@ Use the `IS_LED_ON(usb_led, led_name)` and `IS_LED_OFF(usb_led, led_name)` macro
 ```c
 void led_set_user(uint8_t usb_led) {
     if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        PORTB |= (1<<0);
+        writePinLow(B0);
     } else {
-        PORTB &= ~(1<<0);
+        writePinHigh(B0);
     }
     if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        PORTB |= (1<<1);
+        writePinLow(B1);
     } else {
-        PORTB &= ~(1<<1);
+        writePinHigh(B1);
     }
     if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        PORTB |= (1<<2);
+        writePinLow(B2);
     } else {
-        PORTB &= ~(1<<2);
+        writePinHigh(B2);
     }
     if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) {
-        PORTB |= (1<<3);
+        writePinLow(B3);
     } else {
-        PORTB &= ~(1<<3);
+        writePinHigh(B3);
     }
     if (IS_LED_ON(usb_led, USB_LED_KANA)) {
-        PORTB |= (1<<4);
+        writePinLow(B4);
     } else {
-        PORTB &= ~(1<<4);
+        writePinHigh(B4);
     }
 }
 ```
@@ -189,16 +189,18 @@ However, if you have hardware stuff that you need initialized, this is the best
 
 ### Example `keyboard_pre_init_user()` Implementation
 
-This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
+This example, at the keyboard level, sets up B0, B1, B2, B3, and B4 as LED pins.
 
 ```c
 void keyboard_pre_init_user(void) {
   // Call the keyboard pre init code.
 
   // Set our LED pins as output
-  DDRB |= (1<<1);
-  DDRB |= (1<<2);
-  DDRB |= (1<<3);
+  setPinOutput(B0);
+  setPinOutput(B1);
+  setPinOutput(B2);
+  setPinOutput(B3);
+  setPinOutput(B4);
 }
 ```
 
@@ -270,16 +272,13 @@ This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_
 
 ### Example suspend_power_down_user() and suspend_wakeup_init_user() Implementation
 
-This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
 
 ```c
-void suspend_power_down_user(void)
-{
+void suspend_power_down_user(void) {
     rgb_matrix_set_suspend_state(true);
 }
 
-void suspend_wakeup_init_user(void)
-{
+void suspend_wakeup_init_user(void) {
     rgb_matrix_set_suspend_state(false);
 }
 ```
@@ -356,11 +355,11 @@ user_config_t user_config;
 
 This sets up a 32 bit structure that we can store settings with in memory, and write to the EEPROM. Using this removes the need to define variables, since they're defined in this structure. Remember that `bool` (boolean) values use 1 bit, `uint8_t` uses 8 bits, `uint16_t` uses up 16 bits.  You can mix and match, but changing the order can cause issues, as it will change the values that are read and written. 
 
-We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `matrix_init_user` and `process_record_user` to configure everything. 
+We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `keyboard_post_init_user` and `process_record_user` to configure everything. 
 
-Now, using the `matrix_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap.  And It should look like: 
+Now, using the `keyboard_post_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap.  And It should look like: 
 ```
-void matrix_init_user(void) {
+void keyboard_post_init_user(void) {
   // Call the keymap level matrix init.
 
   // Read the user config from EEPROM
@@ -447,6 +446,7 @@ And lastly, you want to add the `eeconfig_init_user` function, so that when the
 
 ```
 void eeconfig_init_user(void) {  // EEPROM is getting reset! 
+  user_config.raw = 0;
   user_config.rgb_layer_change = true; // We want this enabled by default
   eeconfig_update_user(user_config.raw); // Write default value to EEPROM now
 

docs/faq_build.md

@@ -15,7 +15,7 @@ or just:
 
     $ sudo make <keyboard>:<keymap>:dfu
 
-Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
+Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible.
 
 ### Linux `udev` Rules
 On Linux, you'll need proper privileges to access the MCU. You can either use
@@ -36,6 +36,12 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 # tmk keyboard products     https://github.com/tmk/tmk_keyboard
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
+**/etc/udev/rules.d/54-input-club-keyboard.rules:**
+
+```
+# Input Club keyboard bootloader
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
+```
 
 ### Serial device is not detected in bootloader mode on Linux
 Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
@@ -47,7 +53,12 @@ If you're using Windows to flash your keyboard, and you are running into issues,
 
 Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue.
 
-If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUS(libusb-1.0)` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again.
+If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUSB` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again.  If that doesn't work, try all of the options, until one works. 
+
+?> There isn't a best option for which driver should be used here.  Some options work better on some systems than others.  libUSB and WinUSB seem to be the best options here.
+
+If the bootloader doesn't show up in the list for devices, you may need to enable the "List all devices" option in the `Options` menu, and then find the bootloader in question. 
+
 
 ## WINAVR is Obsolete
 It is no longer recommended and may cause some problem.

docs/feature_audio.md

@@ -100,6 +100,16 @@ In music mode, the following keycodes work differently, and don't pass through:
 * `KC_UP` - speed-up playback
 * `KC_DOWN` - slow-down playback
 
+The pitch standard (`PITCH_STANDARD_A`) is 440.0f by default - to change this, add something like this to your `config.h`:
+
+    #define PITCH_STANDARD_A 432.0f
+
+You can completely disable Music Mode as well. This is useful, if you're pressed for space on your controller.  To disable it, add this to your `config.h`:
+
+    #define NO_MUSIC_MODE
+
+### Music Mask
+
 By default, `MUSIC_MASK` is set to `keycode < 0xFF` which means keycodes less than `0xFF` are turned into notes, and don't output anything. You can change this by defining this in your `config.h` like this:
 
     #define MUSIC_MASK keycode != KC_NO
@@ -120,13 +130,26 @@ For a more advanced way to control which keycodes should still be processed, you
 
 Things that return false are not part of the mask, and are always processed.
 
-The pitch standard (`PITCH_STANDARD_A`) is 440.0f by default - to change this, add something like this to your `config.h`:
+### Music Map
 
-    #define PITCH_STANDARD_A 432.0f
+By default, the Music Mode uses the columns and row to determine the scale for the keys. For a board that uses a rectangular matrix that matches the keyboard layout, this is just fine.  However, for boards that use a more complicated matrix (such as the Planck Rev6, or many split keyboards) this would result in a very skewed experience.  
 
-You can completely disable Music Mode as well. This is useful, if you're pressed for space on your controller.  To disable it, add this to your `config.h`:
+However, the Music Map option allows you to remap the scaling for the music mode, so it fits the layout, and is more natural. 
 
-    #define NO_MUSIC_MODE
+To enable this feature, add `#define MUSIC_MAP` to your `config.h` file, and then you will want to add a `uint8_t music_map` to your keyboard's `c` file, or your `keymap.c`.
+
+```c
+const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT_ortho_4x12(
+	36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+	24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35,
+	12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
+	 0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11
+);
+```
+
+You will want to use whichever `LAYOUT` macro that your keyboard uses here.  This maps it to the correct key location.  Start in  the bottom left of the keyboard layout, and  move to the right, and then upwards.  Fill in all the entries until you have a complete matrix.  
+
+You can look at the [Planck Keyboard](https://github.com/qmk/qmk_firmware/blob/e9ace1487887c1f8b4a7e8e6d87c322988bec9ce/keyboards/planck/planck.c#L24-L29) as an example of how to implement this. 
 
 ## Audio Click
 

docs/feature_grave_esc.md

@@ -18,7 +18,7 @@ If Mary presses GESC on her keyboard, the OS will see an KC_ESC character. Now i
 
 ### Caveats
 
- * On macOS CMD/GUI + KC_GRV is actually mapped to a hot key so it will not output a backtick.
+On macOS, Command+<code>&#96;</code> is by default mapped to "Move focus to next window" so it will not output a backtick. Additionally, Terminal always recognises this shortcut to cycle between windows, even if the shortcut is changed in the Keyboard preferences.
 
 ## Configuration
 

docs/feature_macros.md

@@ -146,9 +146,59 @@ send_string(my_str);
 SEND_STRING(".."SS_TAP(X_END));
 ```
 
-## The Old Way: `MACRO()` & `action_get_macro`
 
-?> This is inherited from TMK, and hasn't been updated - it's recommend that you use `SEND_STRING` and `process_record_user` instead.
+## Advanced Macro Functions
+
+There are some functions you may find useful in macro-writing. Keep in mind that while you can write some fairly advanced code within a macro, if your functionality gets too complex you may want to define a custom keycode instead. Macros are meant to be simple.
+
+### `record->event.pressed`
+
+This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is
+
+```c
+    if (record->event.pressed) {
+        // on keydown
+    } else {
+        // on keyup
+    }
+```
+
+### `register_code(<kc>);`
+
+This sends the `<kc>` keydown event to the computer. Some examples would be `KC_ESC`, `KC_C`, `KC_4`, and even modifiers such as `KC_LSFT` and `KC_LGUI`.
+
+### `unregister_code(<kc>);`
+
+Parallel to `register_code` function, this sends the `<kc>` keyup event to the computer. If you don't use this, the key will be held down until it's sent.
+
+### `tap_code(<kc>);`
+
+This will send `register_code(<kc>)` and then `unregister_code(<kc>)`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it).
+
+If you're having issues with taps (un)registering, you can add a delay between the register and unregister events by setting `#define TAP_CODE_DELAY 100` in your `config.h` file. The value is in milliseconds.
+
+### `register_code16(<kc>);`, `unregister_code16(<kc>);` and `tap_code16(<kc>);`
+
+These functions work similar to their regular counterparts, but allow you to use modded keycodes (with Shift, Alt, Control, and/or GUI applied to them).
+
+Eg, you could use `register_code16(S(KC_5));` instead of registering the mod, then registering the keycode.
+
+### `clear_keyboard();`
+
+This will clear all mods and keys currently pressed.
+
+### `clear_mods();`
+
+This will clear all mods currently pressed.
+
+### `clear_keyboard_but_mods();`
+
+This will clear all keys besides the mods currently pressed.
+
+
+##  **(DEPRECATED)** The Old Way: `MACRO()` & `action_get_macro`
+
+!> This is inherited from TMK, and hasn't been updated - it's recommended that you use `SEND_STRING` and `process_record_user` instead.
 
 By default QMK assumes you don't have any macros. To define your macros you create an `action_get_macro()` function. For example:
 
@@ -222,49 +272,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 ```
 
-## Advanced Macro Functions
 
-There are some functions you may find useful in macro-writing. Keep in mind that while you can write some fairly advanced code within a macro if your functionality gets too complex you may want to define a custom keycode instead. Macros are meant to be simple.
-
-### `record->event.pressed`
-
-This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is
-
-```c
-    if (record->event.pressed) {
-        // on keydown
-    } else {
-        // on keyup
-    }
-```
-
-### `register_code(<kc>);`
-
-This sends the `<kc>` keydown event to the computer. Some examples would be `KC_ESC`, `KC_C`, `KC_4`, and even modifiers such as `KC_LSFT` and `KC_LGUI`.
-
-### `unregister_code(<kc>);`
-
-Parallel to `register_code` function, this sends the `<kc>` keyup event to the computer. If you don't use this, the key will be held down until it's sent.
-
-### `tap_code(<kc>);`
-
-This will send `register_code(<kc>)` and then `unregister_code(<kc>)`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it).
-
-If you're having issues with taps (un)registering, you can add a delay between the register and unregister events by setting `#define TAP_CODE_DELAY 100` in your `config.h` file. The value is in milliseconds.
-
-### `clear_keyboard();`
-
-This will clear all mods and keys currently pressed.
-
-### `clear_mods();`
-
-This will clear all mods currently pressed.
-
-### `clear_keyboard_but_mods();`
-
-This will clear all keys besides the mods currently pressed.
-
-## Advanced Example: Single-Key Copy/Paste
+### Advanced Example: Single-Key Copy/Paste
 
 This example defines a macro which sends `Ctrl-C` when pressed down, and `Ctrl-V` when released.
 

docs/feature_mouse_keys.md

@@ -1,48 +1,48 @@
 # Mousekeys
 
 
-Mousekeys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer around, click up to 5 buttons, and even scroll in all 4 directions. QMK uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
+Mousekeys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer around, click up to 5 buttons, and even scroll in all 4 directions.
 
-## Adding Mousekeys to a Keymap
+There are 2 ways to define how the mousekeys behave, using "[auto-accelerating](#configuring-the-behavior-of-mousekeys-with-auto-accelerated-movement)" or "[3-speed constant](#configuring-the-behavior-of-mousekeys-with-3-speed-constant-movement)" behavior.
 
-There are two steps to adding Mousekeys support to your keyboard. You must enable support in the `rules.mk` file and you must map mouse actions to keys on your keyboard.
+In either case, you will need to enable mousekeys in your makefile,
+and add the relevant [keycodes](#mapping-mouse-actions-to-keyboard-keys) to your keymap.
 
-### Adding Mousekeys Support in the `rules.mk`
+#### Enable Mousekeys
 
-To add support for Mousekeys you simply need to add a single line to your keymap's `rules.mk`:
+To enable the mousekey functionality, add the following line to your keymap's `rules.mk`:
 
 ```
 MOUSEKEY_ENABLE = yes
 ```
 
-You can see an example here: https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/66/keymaps/mouse_keys/rules.mk
-
-### Mapping Mouse Actions to Keyboard Keys
+#### Mapping Mouse Actions to Keyboard Keys
 
 You can use these keycodes within your keymap to map button presses to mouse actions:
 
-|Key             |Aliases  |Description                |
-|----------------|---------|---------------------------|
-|`KC_MS_UP`      |`KC_MS_U`|Mouse Cursor Up            |
-|`KC_MS_DOWN`    |`KC_MS_D`|Mouse Cursor Down          |
-|`KC_MS_LEFT`    |`KC_MS_L`|Mouse Cursor Left          |
-|`KC_MS_RIGHT`   |`KC_MS_R`|Mouse Cursor Right         |
-|`KC_MS_BTN1`    |`KC_BTN1`|Mouse Button 1             |
-|`KC_MS_BTN2`    |`KC_BTN2`|Mouse Button 2             |
-|`KC_MS_BTN3`    |`KC_BTN3`|Mouse Button 3             |
-|`KC_MS_BTN4`    |`KC_BTN4`|Mouse Button 4             |
-|`KC_MS_BTN5`    |`KC_BTN5`|Mouse Button 5             |
-|`KC_MS_WH_UP`   |`KC_WH_U`|Mouse Wheel Up             |
-|`KC_MS_WH_DOWN` |`KC_WH_D`|Mouse Wheel Down           |
-|`KC_MS_WH_LEFT` |`KC_WH_L`|Mouse Wheel Left           |
-|`KC_MS_WH_RIGHT`|`KC_WH_R`|Mouse Wheel Right          |
-|`KC_MS_ACCEL0`  |`KC_ACL0`|Set mouse acceleration to 0|
-|`KC_MS_ACCEL1`  |`KC_ACL1`|Set mouse acceleration to 1|
-|`KC_MS_ACCEL2`  |`KC_ACL2`|Set mouse acceleration to 2|
+|Key             |Aliases  |Description                        |
+|----------------|---------|-----------------------------------|
+|`KC_MS_UP`      |`KC_MS_U`|Mouse Cursor Up                    |
+|`KC_MS_DOWN`    |`KC_MS_D`|Mouse Cursor Down                  |
+|`KC_MS_LEFT`    |`KC_MS_L`|Mouse Cursor Left                  |
+|`KC_MS_RIGHT`   |`KC_MS_R`|Mouse Cursor Right                 |
+|`KC_MS_BTN1`    |`KC_BTN1`|Mouse Button 1                     |
+|`KC_MS_BTN2`    |`KC_BTN2`|Mouse Button 2                     |
+|`KC_MS_BTN3`    |`KC_BTN3`|Mouse Button 3                     |
+|`KC_MS_BTN4`    |`KC_BTN4`|Mouse Button 4                     |
+|`KC_MS_BTN5`    |`KC_BTN5`|Mouse Button 5                     |
+|`KC_MS_WH_UP`   |`KC_WH_U`|Mouse Wheel Up                     |
+|`KC_MS_WH_DOWN` |`KC_WH_D`|Mouse Wheel Down                   |
+|`KC_MS_WH_LEFT` |`KC_WH_L`|Mouse Wheel Left                   |
+|`KC_MS_WH_RIGHT`|`KC_WH_R`|Mouse Wheel Right                  |
+|`KC_MS_ACCEL0`  |`KC_ACL0`|Set mouse acceleration to 0(slow)  |
+|`KC_MS_ACCEL1`  |`KC_ACL1`|Set mouse acceleration to 1(medium)|
+|`KC_MS_ACCEL2`  |`KC_ACL2`|Set mouse acceleration to 2(fast)  |
 
-You can see an example in the `_ML` here: https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/66/keymaps/mouse_keys/keymap.c#L46
 
-## Configuring the Behavior of Mousekeys
+## Configuring the Behavior of Mousekeys with auto-accelerated movement
+
+This behavior is intended to emulate the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
 
 The default speed for controlling the mouse with the keyboard is intentionally slow. You can adjust these parameters by adding these settings to your keymap's `config.h` file. All times are specified in milliseconds (ms).
 
@@ -55,27 +55,60 @@ The default speed for controlling the mouse with the keyboard is intentionally s
 #define MOUSEKEY_WHEEL_TIME_TO_MAX 40
 ```
 
-
-### `MOUSEKEY_DELAY`
+#### `MOUSEKEY_DELAY`
 
 When one of the mouse movement buttons is pressed this setting is used to define the delay between that button press and the mouse cursor moving. Some people find that small movements are impossible if this setting is too low, while settings that are too high feel sluggish.
 
-### `MOUSEKEY_INTERVAL`
+#### `MOUSEKEY_INTERVAL`
 
 When a movement key is held down this specifies how long to wait between each movement report. Lower settings will translate into an effectively higher mouse speed.
 
-### `MOUSEKEY_MAX_SPEED`
+#### `MOUSEKEY_MAX_SPEED`
 
 As a movement key is held down the speed of the mouse cursor will increase until it reaches `MOUSEKEY_MAX_SPEED`.
 
-### `MOUSEKEY_TIME_TO_MAX`
+#### `MOUSEKEY_TIME_TO_MAX`
 
 How long you want to hold down a movement key for until `MOUSEKEY_MAX_SPEED` is reached. This controls how quickly your cursor will accelerate.
 
-### `MOUSEKEY_WHEEL_MAX_SPEED`
+#### `MOUSEKEY_WHEEL_MAX_SPEED`
 
 The top speed for scrolling movements.
 
-### `MOUSEKEY_WHEEL_TIME_TO_MAX`
+#### `MOUSEKEY_WHEEL_TIME_TO_MAX`
 
 How long you want to hold down a scroll key for until `MOUSEKEY_WHEEL_MAX_SPEED` is reached. This controls how quickly your scrolling will accelerate.
+
+
+## Configuring the Behavior of Mousekeys with 3-speed constant movement
+
+In your keymap's `config.h`, you must add the line:
+```
+#define MK_3_SPEED
+```
+Then you can precisely define 3 different speeds for both the cursor and the mouse wheel, and also whether speed selection is momentary or tap-to-select.
+For each speed, you can specify how many milliseconds you want between reports(interval), and how far you want to it to move per report(offset).
+
+For example:
+
+```
+#define MK_3_SPEED
+#define MK_MOMENTARY_ACCEL // comment this out for tap-to-select acceleration
+// cursor speeds:
+#define MK_C_OFFSET_SLOW     1 // pixels
+#define MK_C_INTERVAL_SLOW 100 // milliseconds
+#define MK_C_OFFSET_MED      4
+#define MK_C_INTERVAL_MED   16
+#define MK_C_OFFSET_FAST    12
+#define MK_C_INTERVAL_FAST  16
+// scroll wheel speeds:
+#define MK_W_OFFSET_SLOW     1 // wheel clicks
+#define MK_W_INTERVAL_SLOW 400 // milliseconds
+#define MK_W_OFFSET_MED      1
+#define MK_W_INTERVAL_MED  200
+#define MK_W_OFFSET_FAST     1
+#define MK_W_INTERVAL_FAST 100
+```
+
+Medium values will be used as the default or unmodified speed.
+The speed at which both the cursor and scrolling move can be selected with KC_ACL0, KC_ACL1, KC_ACL2 for slow, medium, and fast. However, if you leave MK_MOMENTARY_ACCEL defined then there is no need to ever send KC_ACL1, since that will be the unmodified speed.

docs/feature_rgb_matrix.md

@@ -147,6 +147,7 @@ These are the effects that are currently available:
 	    RGB_MATRIX_DIGITAL_RAIN,
 	#ifdef RGB_MATRIX_KEYPRESSES
 	    RGB_MATRIX_SOLID_REACTIVE,
+	    RGB_MATRIX_REACTIVE_SIMPLE,
 	    RGB_MATRIX_SPLASH,
 	    RGB_MATRIX_MULTISPLASH,
 	    RGB_MATRIX_SOLID_SPLASH,
@@ -173,6 +174,7 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 |`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`   |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`   |
 |`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`          |Disables `RGB_MATRIX_DIGITAL_RAIN`          |
 |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`        |Disables `RGB_MATRIX_SOLID_REACTIVE`        |
+|`#define DISABLE_RGB_MATRIX_REACTIVE_SIMPLE`       |Disables `RGB_MATRIX_REACTIVE_SIMPLE`       |
 |`#define DISABLE_RGB_MATRIX_SPLASH`                |Disables `RGB_MATRIX_SPLASH`                |
 |`#define DISABLE_RGB_MATRIX_MULTISPLASH`           |Disables `RGB_MATRIX_MULTISPLASH`           |
 |`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`          |Disables `RGB_MATRIX_SOLID_SPLASH`          |

docs/feature_rgblight.md

@@ -23,10 +23,11 @@ RGBLIGHT_ENABLE = yes
 
 At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these.
 
-|Define      |Description                                  |
-|------------|---------------------------------------------|
-|`RGB_DI_PIN`|The pin connected to the data pin of the LEDs|
-|`RGBLED_NUM`|The number of LEDs connected                 |
+|Define         |Description                                                                                              |
+|---------------|---------------------------------------------------------------------------------------------------------|
+|`RGB_DI_PIN`   |The pin connected to the data pin of the LEDs                                                            |
+|`RGBLED_NUM`   |The number of LEDs connected                                                                             |
+|`RGBLED_SPLIT` |(Optional) For split keyboards, the number of LEDs connected on each half directly wired to `RGB_DI_PIN` |
 
 Then you should be able to use the keycodes below to change the RGB lighting to your liking.
 
@@ -124,6 +125,8 @@ The following options can be used to tweak the various animations:
 
 You can also modify the speeds that the different modes animate at:
 
+Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY).
+
 ```c
 // How long (in milliseconds) to wait between animation steps for each of the "Solid color breathing" animations
 const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
@@ -188,6 +191,53 @@ If you need to change your RGB lighting in code, for example in a macro to chang
 
 Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list!
 
+## Changing the order of the LEDs
+
+If you want to make the logical order of LEDs different from the electrical connection order, you can do this by defining the `RGBLIGHT_LED_MAP` macro in your `config.h`.
+
+By defining `RGBLIGHT_LED_MAP` as in the example below, you can specify the LED with addressing in reverse order of the electrical connection order.
+
+```c
+// config.h
+
+#define RGBLED_NUM 10
+#define RGBLIGHT_LED_MAP { 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 }
+
+```
+
+For keyboards that use the RGB LEDs as a backlight for each key, you can also define it as in the example below.
+
+```c
+// config.h
+
+#define RGBLED_NUM 30
+
+/* RGB LED Conversion macro from physical array to electric array */
+#define LED_LAYOUT( \
+    L00, L01, L02, L03, L04, L05,  \
+    L10, L11, L12, L13, L14, L15,  \
+    L20, L21, L22, L23, L24, L25,  \
+    L30, L31, L32, L33, L34, L35,  \
+    L40, L41, L42, L43, L44, L45 ) \
+  { \
+    L05, L04, L03, L02, L01, L00,   \
+    L10, L11, L12, L13, L14, L15,   \
+    L25, L24, L23, L22, L21, L20,   \
+    L30, L31, L32, L33, L34, L35,   \
+    L46, L45, L44, L43, L42, L41    \
+  }
+
+/* RGB LED logical order map */
+/* Top->Bottom, Right->Left */
+#define RGBLIGHT_LED_MAP LED_LAYOUT( \
+  25, 20, 15, 10,  5,  0,       \
+  26, 21, 16, 11,  6,  1,       \
+  27, 22, 17, 12,  7,  2,       \
+  28, 23, 18, 13,  8,  3,       \
+  29, 24, 19, 14,  9,  4 )
+
+```
+
 ## Hardware Modification
 
 If your keyboard lacks onboard underglow LEDs, you may often be able to solder on an RGB LED strip yourself. You will need to find an unused pin to wire to the data pin of your LED strip. Some keyboards may break out unused pins from the MCU to make soldering easier. The other two pins, VCC and GND, must also be connected to the appropriate power pins.

docs/flashing.md

@@ -49,9 +49,18 @@ To generate this bootloader, use the `bootloader` target, eg `make planck/rev4:d
 
 To generate a production-ready .hex file (containing the application and the bootloader), use the `production` target, eg `make planck/rev4:default:production`.
 
+### DFU commands
+
+There are a number of DFU commands that you can use to flash firmware to a DFU device:
+
+* `:dfu` - This is the normal option and waits until a DFU device is available, and then flashes the firmware. This will check every 5 seconds, to see if a DFU device has appeared.
+* `:dfu-ee` - This flashes an `eep` file instead of the normal hex.  This is uncommon. 
+* `:dfu-split-left` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
+* `:dfu-split-right` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
+
 ## Caterina
 
-Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina.
+Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/ArduinoCore-avr/tree/master/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina.
 
 To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`:
 
@@ -84,6 +93,7 @@ or if you want to flash multiple boards, use the following command
 
 When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
 
+
 ## Halfkay
 
 Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0).
@@ -131,3 +141,12 @@ Flashing sequence:
     * You will receive a warning about the DFU signature; Just ignore it
 4. Reset the device into application mode (may be done automatically)
     * If you are building from command line (e.g. `make planck/rev6:default:dfu-util`), make sure that `:leave` is passed to the `DFU_ARGS` variable inside your `rules.mk` (e.g. `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) so that your device resets after flashing
+
+### STM32 Commands
+
+There are a number of DFU commands that you can use to flash firmware to a STM32 device:
+
+* `:dfu-util` - The default command for flashing to STM32 devices. 
+* `:dfu-util-wait` - This works like the default command, but it gives you a (configurable) 10 second timeout before it attempts to flash the firmware.  You can use `TIME_DELAY=20` from the command line to change the timeout.
+   * Eg: `make <keyboard>:<keymap>:dfu-util TIME_DELAY=5`
+* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 

docs/getting_started_build_tools.md

@@ -2,6 +2,8 @@
 
 This page describes setting up the build environment for QMK. These instructions cover AVR processors (such as the atmega32u4).
 
+After cloning the repo of QMK run `make git-submodule` once to download 3rd party libraries like ChibiOS.
+
 <!-- FIXME: We should have ARM instructions somewhere. -->
 
 Note: If it is your first time here, Check out the "Complete Newbs guide" instead

docs/isp_flashing_guide.md

@@ -63,6 +63,7 @@ If you just want to get things back to normal, you can flash only a bootloader f
 
 * [`atmega32u4`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) - Most keyboards, Planck Rev 1-5, Preonic Rev 1-2
 * [`at90usb1286`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128x_1_0_1.hex) - Planck Light Rev 1
+* [`atmega32a`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32a_1_0_0.hex) - jj40
 
 If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU =` line will have the value you need. It may differ between different versions of the board.
 
@@ -113,6 +114,10 @@ Since our keyboard uses an `atmega32u4` (common), that is the chip we'll specify
 
     avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i
 
+If your board uses an `atmega32a` (e.g. on a jj40), the command is this (the extra code at the end sets the fuses correctly):
+
+	avrdude -c avrisp -P COM3 -p atmega32 -U flash:w:main.hex:i -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m
+
 You should see a couple of progress bars, then you should see:
 
     avrdude: verifying ...

docs/keymap.md

@@ -161,62 +161,6 @@ Some interesting things to note:
 * We have used our `_______` definition to turn `KC_TRNS` into `_______`. This makes it easier to spot the keys that have changed on this layer.
 * While in this layer if you press one of the `_______` keys it will activate the key in the next lowest active layer.
 
-### Custom Functions
-
-At the bottom of the file we've defined a single custom function. This function defines a key that sends `KC_ESC` when pressed without modifiers and `KC_GRAVE` when modifiers are held. There are a couple pieces that need to be in place for this to work, and we will go over both of them.
-
-#### `fn_actions[]`
-
-We define the `fn_actions[]` array to point to custom functions. `F(N)` in a keymap will call element N of that array. For the Clueboard's that looks like this:
-
-    const uint16_t PROGMEM fn_actions[] = {
-      [0] = ACTION_FUNCTION(0),  // Calls action_function()
-    };
-
-In this case we've instructed QMK to call the `ACTION_FUNCTION` callback, which we will define in the next section.
-
-> This `fn_actions[]` interface is mostly for backward compatibility.  In QMK, you don't need to use `fn_actions[]`.  You can directly use `ACTION_FUNCTION(N)` or any other action code value itself normally generated by the macro in `keymaps[][MATRIX_ROWS][MATRIX_COLS]`.  N in `F(N)` can only be 0 to 31.  Use of the action code directly in `keymaps` unlocks this limitation.
-
-You can get a full list of Action Functions in [action_code.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action_code.h). 
-
-#### `action_function()`
-
-To actually handle the keypress event we define an `action_function()`. This function will be called when the key is pressed, and then again when the key is released. We have to handle both situations within our code, as well as determining whether to send/release `KC_ESC` or `KC_GRAVE`.
-
-    void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-      static uint8_t mods_pressed;
-
-      switch (id) {
-        case 0:
-          /* Handle the combined Grave/Esc key
-           */
-          mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
-
-          if (record->event.pressed) {
-            /* The key is being pressed.
-             */
-            if (mods_pressed) {
-              add_key(KC_GRV);
-              send_keyboard_report();
-            } else {
-              add_key(KC_ESC);
-              send_keyboard_report();
-            }
-          } else {
-            /* The key is being released.
-             */
-            if (mods_pressed) {
-              del_key(KC_GRV);
-              send_keyboard_report();
-            } else {
-              del_key(KC_ESC);
-              send_keyboard_report();
-            }
-          }
-          break;
-      }
-    }
-
 # Nitty Gritty Details
 
 This should have given you a basic overview for creating your own keymap. For more details see the following resources:

docs/newbs_flashing.md

@@ -131,6 +131,16 @@ If you have any issues with this, you may need to this:
 
     sudo make <my_keyboard>:<my_keymap>:dfu
 
+#### DFU commands
+
+There are a number of DFU commands that you can use to flash firmware to a DFU device:
+
+* `:dfu` - This is the normal option and waits until a DFU device is available, and then flashes the firmware. This will check every 5 seconds, to see if a DFU device has appeared.
+* `:dfu-ee` - This flashes an `eep` file instead of the normal hex.  This is uncommon. 
+* `:dfu-split-left` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
+* `:dfu-split-right` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
+
+
 ### Caterina 
 
 For Arduino boards and their clones (such as the SparkFun ProMicro), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
@@ -199,6 +209,14 @@ If you have any issues with this, you may need to this:
 
     sudo make <my_keyboard>:<my_keymap>:avrdude
 
+
+Additionally, if you want to flash multiple boards, use the following command:
+
+    make <keyboard>:<keymap>:avrdude-loop
+
+When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
+
+
 ## HalfKay
 
 For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
@@ -226,12 +244,61 @@ Waiting for Teensy device...
 
  ```
  Found HalfKay Bootloader
-Read "./.build/ergodox_ez_drashna.hex": 28532 bytes, 88.5% usage
+Read "./.build/ergodox_ez_xyverz.hex": 28532 bytes, 88.5% usage
 Programming............................................................................................................................................................................
 ...................................................
 Booting
 ```
 
+## STM32 (ARM)
+
+For a majority of ARM boards (including the Proton C, Planck Rev 6, and Preonic Rev 3), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
+
+    make <my_keyboard>:<my_keymap>:dfu-util
+
+For example, if your keymap is named "xyverz" and you're building a keymap for the Planck Revision 6 keyboard, you'll use this command and then reboot the keyboard to the bootloader (before it finishes compiling):
+
+    make planck/rev6:xyverz:dfu-util
+
+Once the firmware finishes compiling, it will output something like this: 
+
+```
+Linking: .build/planck_rev6_xyverz.elf                                                             [OK]
+Creating binary load file for flashing: .build/planck_rev6_xyverz.bin                               [OK]
+Creating load file for flashing: .build/planck_rev6_xyverz.hex                                     [OK]
+
+Size after:
+   text    data     bss     dec     hex filename
+      0   41820       0   41820    a35c .build/planck_rev6_xyverz.hex
+
+Copying planck_rev6_xyverz.bin to qmk_firmware folder                                              [OK]
+dfu-util 0.9
+
+Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
+Copyright 2010-2016 Tormod Volden and Stefan Schmidt
+This program is Free Software and has ABSOLUTELY NO WARRANTY
+Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
+
+Invalid DFU suffix signature
+A valid DFU suffix will be required in a future dfu-util release!!!
+Opening DFU capable USB device...
+ID 0483:df11
+Run-time device DFU version 011a
+Claiming USB DFU Interface...
+Setting Alternate Setting #0 ...
+Determining device status: state = dfuERROR, status = 10
+dfuERROR, clearing status
+Determining device status: state = dfuIDLE, status = 0
+dfuIDLE, continuing
+DFU mode device DFU version 011a
+Device returned transfer size 2048
+DfuSe interface name: "Internal Flash  "
+Downloading to address = 0x08000000, size = 41824
+Download        [=========================] 100%        41824 bytes
+Download done.
+File downloaded successfully
+Transitioning to dfuMANIFEST state
+```
 
 ## Test It Out!
 

docs/newbs_getting_started.md

@@ -66,8 +66,10 @@ You will need to install Git. It's very likely that you already have it, but if
 
 Once you have set up your Linux/Unix environment, you are ready to download QMK. We will do this by using Git to "clone" the QMK repository. Open a Terminal or MSYS2 MinGW window and leave it open for the remainder of this guide. Inside that window run these two commands:
 
-    git clone https://github.com/qmk/qmk_firmware.git
-    cd qmk_firmware
+```shell
+git clone --recurse-submodules https://github.com/qmk/qmk_firmware.git
+cd qmk_firmware
+```
 
 ?> If you already know [how to use GitHub](getting_started_github.md), we recommend that you create and clone your own fork instead. If you don't know what that means, you can safely ignore this message.
 

docs/understanding_qmk.md

@@ -135,9 +135,11 @@ The `process_record()` function itself is deceptively simple, but hidden within
 * [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172)
   * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206)
     * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226)
+    * [`void velocikey_accelerate(void)`](https://github.com/qmk/qmk_firmware/blob/c1c5922aae7b60b7c7d13d3769350eed9dda17ab/quantum/velocikey.c#L27)
     * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119)
     * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62)
     * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79)
+    * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216)
     * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20)
       * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
     * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139)

keyboards/1upkeyboards/1up60hte/1up60hte.h

@@ -19,12 +19,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
-#define LAYOUT_all( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
+#define LAYOUT_tsangan( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K413, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
-	K400, K401, K402,                   K406,                   K410, K411, K412, K413  \
+	K400, K401, K402,                   K406,                   K410, K411, K412        \
 ) { \
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
@@ -35,11 +35,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* HHKB Variant */
 #define LAYOUT_60_hhkb( \
-  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K413, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
-	      K401, K402,                  K406,                    K410, K411,       K413  \
+	      K401, K402,                  K406,                    K410, K411              \
 ) { \
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
@@ -47,4 +47,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO }, \
 	{ KC_NO, K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413 }  \
 }
-

keyboards/1upkeyboards/1up60hte/config.h

@@ -62,4 +62,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
-#endif
+#endif

keyboards/1upkeyboards/1up60hte/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "1up60hte", 
+    "url": "https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/", 
+    "maintainer": "1upkeyboards", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_tsangan": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4}, {"label":"Meta", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Meta", "x":11, "y":4, "w":1.5}, {"label":"Alt", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+        },
+        "LAYOUT_60_hhkb": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Alt", "x":1.5, "y":4}, {"label":"Meta", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Meta", "x":11, "y":4, "w":1.5}, {"label":"Alt", "x":12.5, "y":4}]
+        }
+    }
+}

keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c

@@ -17,21 +17,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	[0] = LAYOUT_all(
-		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV,
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
-		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_NO,
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_BSPC),
-
-	[1] = LAYOUT_all(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
-
+	[0] = LAYOUT_tsangan(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,     KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,     KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,     KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, KC_LSFT, MO(1),
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC,  KC_LGUI, KC_LALT, KC_LCTL),
+		
+	[1] = LAYOUT_tsangan(
+		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_INS, KC_DEL,
+		KC_CAPS, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK,  KC_PAUS, KC_UP,   KC_TRNS, KC_CLR,
+		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP,  KC_LEFT, KC_RGHT, KC_TRNS,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN,   KC_DOWN, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
 };
 
 void matrix_init_user(void) {

keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c

@@ -17,20 +17,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	[0] = LAYOUT_all(
-		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV,
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
-		KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(1),
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_BSPC),
-
-	[1] = LAYOUT_all(
-		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS,
-		KC_CAPS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
-		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL)
+	[0] = LAYOUT_tsangan(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,     KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,     KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,     KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, KC_LSFT, MO(1),
+		KC_NO,   KC_LALT, KC_LGUI, KC_SPC,  KC_LGUI, KC_LALT, KC_NO),
+		
+	[1] = LAYOUT_tsangan(
+		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_INS, KC_DEL,
+		KC_CAPS, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK,  KC_PAUS, KC_UP,   KC_TRNS, KC_CLR,
+		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP,  KC_LEFT, KC_RGHT, KC_TRNS,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN,   KC_DOWN, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
 };
 
 void matrix_init_user(void) {
@@ -45,35 +44,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 }
 
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
 		writePinLow(B6);
 	} else {
 		writePinHigh(B6);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include "1up60rgb.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 

keyboards/1upkeyboards/sweet16/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include "sweet16.h"
+#include QMK_KEYBOARD_H
 
 enum custom_keycodes {
   UP_URL = SAFE_RANGE

keyboards/40percentclub/half_n_half/keymaps/Boy_314/config.h

@@ -19,4 +19,4 @@
 // place overrides here
 #define IGNORE_MOD_TAP_INTERRUPT
 #define PERMISSIVE_HOLD
-#define TAPPING_TERM 200
+#define TAPPING_TERM 200

keyboards/40percentclub/half_n_half/keymaps/Boy_314/keymap.c

@@ -21,10 +21,17 @@ enum {
 };
 
 enum layers {
-	DVORAK,
-	QWERTY,
-	LOWER,
-	RAISE
+	_DVORAK,
+	_QWERTY,
+	_LOWER,
+	_RAISE,
+};
+
+enum halfnhalf_keycodes {
+	NEWTAB = SAFE_RANGE,
+	ALTF4,
+	CLSTAB,
+	PRVWIN,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -36,78 +43,78 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
 	 * |LShift|;     |Q     |J     |K     |X     |LAlt  |-     |B     |M     |W     |V     |Z     |RShift|
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 *                             |TD Swap Layer|             |Space        |      
-	 *                             `-------------'             `-------------'
+	 *                             |TD Swap Layer|             |Space        |
+	 *                             `-------------'			       `-------------'
 	 */
-	[DVORAK] = LAYOUT(/* Base Dvorak */
-	  KC_TAB,           KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_BRIU, KC_EQL,     KC_F, KC_G, KC_C,    KC_R,   KC_L,   KC_BSPC, 
-	  LCTL_T(KC_CAPS),  KC_A,    KC_O,    KC_E,   KC_U, KC_I, KC_BRID, LCTL(KC_F), KC_D, KC_H, KC_T,    KC_N,   KC_S,   KC_ENT, 
-	  KC_LSPO,          KC_SCLN, KC_Q,    KC_J,   KC_K, KC_X, KC_LALT, KC_MINS,    KC_B, KC_M, KC_W,    KC_V,   KC_Z,   KC_RSPC, 
-	                                      TD(TD_SWAP_LAYERS),                      KC_SPC
+	[_DVORAK] = LAYOUT(/* Base Dvorak */
+	  KC_TAB,           KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_BRIU, KC_EQL,     KC_F, KC_G, KC_C,    KC_R,   KC_L,   KC_BSPC,
+	  LCTL_T(KC_CAPS),  KC_A,    KC_O,    KC_E,   KC_U, KC_I, KC_BRID, LCTL(KC_F), KC_D, KC_H, KC_T,    KC_N,   KC_S,   KC_ENT,
+	  KC_LSPO,          KC_SCLN, KC_Q,    KC_J,   KC_K, KC_X, KC_LALT, KC_MINS,    KC_B, KC_M, KC_W,    KC_V,   KC_Z,   KC_RSPC,
+	                                              TD(TD_SWAP_LAYERS),                    KC_SPC
 	),
-	
+
 	/* QWERTY
 	 * ,-------------------------------------------------------------------------------------------------.
 	 * |Tab   |Q     |W     |E     |R     |T     |Brght+|'     |Y     |U     |I     |O     |P     |Bksp  |
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |LCtrl |A     |S     |D     |F     |G     |Brght-|Ctrl+F|H     |J     |K     |L     |;     |Enter |
+	 * |CtlCps|A     |S     |D     |F     |G     |Brght-|Ctrl+F|H     |J     |K     |L     |;     |Enter |
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
 	 * |LShift|Z     |X     |C     |V     |B     |LAlt  |-     |N     |M     |,     |.     |/     |RShift|
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 *                             |TD Swap Layer|             |Space        |      
-	 *                             `-------------'             `-------------'
+	 *                             |TD Swap Layer|             |Space        |
+	 *                             `-------------'			       `-------------'
 	 */
-	[QWERTY] = LAYOUT(/* Base Qwerty */
-	  KC_TAB,   KC_Q,    KC_W,    KC_E,   KC_R, KC_T, KC_BRIU, KC_QUOT,    KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_BSPC, 
-	  KC_LCTL,  KC_A,    KC_S,    KC_D,   KC_F, KC_G, KC_BRID, LCTL(KC_F), KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_ENT, 
-	  KC_LSPO,  KC_Z,    KC_X,    KC_C,   KC_V, KC_B, KC_LALT, KC_MINS,    KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, 
-	                                      TD(TD_SWAP_LAYERS),                    KC_SPC
+	[_QWERTY] = LAYOUT(/* Base Qwerty */
+	  KC_TAB,           KC_Q,    KC_W,    KC_E,   KC_R, KC_T, KC_BRIU, KC_QUOT,    KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_BSPC,
+	  LCTL_T(KC_CAPS),  KC_A,    KC_S,    KC_D,   KC_F, KC_G, KC_BRID, LCTL(KC_F), KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_ENT,
+	  KC_LSPO,          KC_Z,    KC_X,    KC_C,   KC_V, KC_B, KC_LALT, KC_MINS,    KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC,
+	                                              TD(TD_SWAP_LAYERS),                    KC_SPC
 	),
-	
+
 	/* LOWER
 	 * ,-------------------------------------------------------------------------------------------------.
-	 * |Esc   |1     |2     |3     |4     |5     |      |=     |6     |7     |8     |9     |0     |/     |
+	 * |Esc   |1     |2     |3     |4     |5     |      |      |6     |7     |8     |9     |0     |/     |
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
 	 * |Caps  |F1    |F2    |F3    |F4    |F5    |F6    |Vol Up|Play  |_     |+     |{     |}     ||     |
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
 	 * |      |F7    |F8    |F9    |F10   |F11   |F12   |Vol Dn|Next  |Home  |PgDn  |PgUp  |End   |      |
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 *                             |             |             |             |      
+	 *                             |             |             |             |
 	 *                             `-------------'             `-------------'
 	 */
-	[LOWER] = LAYOUT(/* Numbers, Function Row, Media Control, Shifted Symbols, Dvorak Slash Key */
-	  KC_GESC, KC_1,  KC_2,  KC_3,  KC_4,   KC_5,   KC_TRNS, KC_TRNS, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SLSH, 
-	  KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4,  KC_F5,  KC_F6,   KC_VOLU, KC_MPLY, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, 
+	[_LOWER] = LAYOUT(/* Numbers, Function Row, Media Control, Shifted Symbols, Dvorak Slash Key */
+	  KC_GESC, KC_1,  KC_2,  KC_3,  KC_4,   KC_5,   KC_TRNS, KC_TRNS, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SLSH,
+	  KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4,  KC_F5,  KC_F6,   KC_VOLU, KC_MPLY, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
 	  KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,  KC_VOLD, KC_MNXT, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_TRNS,
-									KC_TRNS,    					           KC_TRNS
+									                KC_TRNS,    					            KC_TRNS
 	),
-	
+
 	/* RAISE
 	 * ,-------------------------------------------------------------------------------------------------.
-	 * |Reset |      |      |Up    |      |      |      |      |      |      |      |      |      |Del   |
+	 * |Reset |      |      |Up    |      |      |      |PRVWIN|CLSTAB|      |      |      |      |Del   |
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |`     |      |Left  |Down  |Right |      |      |      |      |-     |=     |[     |]     |\     |
+	 * |`     |      |Left  |Down  |Right |      |      |NEWTAB|ALTF4 |-     |=     |[     |]     |\     |
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
 	 * |      |!     |@     |#     |$     |%     |      |      |^     |&     |*     |(     |)     |      |
 	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 *                             |             |             |             |      
+	 *                             |             |             |             |
 	 *                             `-------------'             `-------------'
 	 */
-	[RAISE] = LAYOUT(/* Arrows, Shifted Numbers, Symbols, Delete, Reset Key */
-	  RESET,   KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,
-	  KC_GRV,  KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, 
-	  KC_TRNS, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_TRNS, KC_TRNS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS, 
-										  KC_TRNS, 									   KC_TRNS
+	[_RAISE] = LAYOUT(/* Arrows, Shifted Numbers, Symbols, Delete, Macros */
+	  RESET,   KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, PRVWIN,  CLSTAB,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,
+	  KC_GRV,  KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, NEWTAB,  ALTF4,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+	  KC_TRNS, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_TRNS, KC_TRNS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS,
+										                    KC_TRNS,                            KC_TRNS
 	)
 };
 
 void tap_dance_choose_layer (qk_tap_dance_state_t *state, void *user_data) {
 	switch (state->count) {
 		case 1:
-			layer_on(LOWER);
+			layer_on(_LOWER);
 			break;
 		case 2:
-			layer_on(RAISE);
+			layer_on(_RAISE);
 			break;
 	}
 }
@@ -115,27 +122,52 @@ void tap_dance_choose_layer (qk_tap_dance_state_t *state, void *user_data) {
 void tap_dance_choose_layer_reset (qk_tap_dance_state_t *state, void *user_data) {
 	switch (state->count) {
 		case 1:
-			layer_off(LOWER);
+			layer_off(_LOWER);
 			break;
 		case 2:
-			layer_off(RAISE);
+			layer_off(_RAISE);
 			break;
 		case 3:
-			if (default_layer_state == DVORAK) {
-				default_layer_set(QWERTY);
-				layer_on(QWERTY);
-				layer_off(DVORAK);
+			if (biton32(default_layer_state) == _DVORAK) {
+				set_single_persistent_default_layer(_QWERTY);
 			}
-			else if (default_layer_state == QWERTY) {
-				default_layer_set(DVORAK);
-				layer_on(DVORAK);
-				layer_off(QWERTY);
+			else if (biton32(default_layer_state) == _QWERTY) {
+				set_single_persistent_default_layer(_DVORAK);
 			}
 			break;
 	}
 }
 
 qk_tap_dance_action_t tap_dance_actions[] = {
-	// ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)
 	[TD_SWAP_LAYERS] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, tap_dance_choose_layer, tap_dance_choose_layer_reset)
-};
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	switch (keycode) {
+		// Control + T
+		case NEWTAB:
+			if (record->event.pressed) {
+				SEND_STRING(SS_LCTRL("t"));
+			}
+			break;
+		// Alt + F4
+		case ALTF4:
+			if (record->event.pressed) {
+				SEND_STRING(SS_DOWN(X_LALT)SS_TAP(X_F4)SS_UP(X_LALT));
+			}
+			break;
+		// Control + W
+		case CLSTAB:
+			if (record->event.pressed) {
+				SEND_STRING(SS_LCTRL("w"));
+			}
+			break;
+		// Control + Shift + N
+		case PRVWIN:
+			if (record->event.pressed) {
+				SEND_STRING(SS_LCTRL(SS_LSFT("n")));
+			}
+			break;
+	}
+	return true;
+}

keyboards/40percentclub/mf68/keymaps/default/keymap.c

@@ -3,51 +3,29 @@
 #define _QWERTY 0
 #define _FN1 1
 #define _FN2 2
-#define KC_ KC_TRNS
-#define KC_X0 LT(_FN2, KC_GRV)
-#define KC_X1 MO(_FN1)
-#define KC_X2 BL_STEP
+
+#define FN2_GRV LT(_FN2, KC_GRV)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc(
- /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------.  ,----+----. */
-    ESC , 1  , 2  , 3  , 4  , 5  , 6  , 7  , 8  , 9  , 0  ,MINS,EQL ,  BSPC  ,   INS ,PGUP,
- /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------|  |----`----| */
-    TAB   , Q  , W  , E  , R  , T  , Y  , U  , I  , O  , P  ,LBRC,RBRC, BSLS ,   DEL ,PGDN,
- /*|------`----`----`----`----`----`----`----`----`----`----`----`----`------|  `----`----' */
-    X0     , A  , S  , D  , F  , G  , H  , J  , K  , L  ,SCLN,QUOT,    ENTER ,
- /*|-------`----`----`----`----`----`----`----`----`----`----`----`----------|  ,----. */
-    LSFT     , Z  , X  , C  , V  , B  , N  , M  ,COMM,DOT ,SLSH,       RSFT  ,    UP ,
- /*|---------`----`----`----`----`----`----`----`----`----`----`-------------.--|----|----. */
-    LCTL ,LGUI ,LALT ,            SPACE             ,  X1  ,RALT ,RCTL ,    LEFT,DOWN,RGHT
- /*`-----+-----+-----+------------------------------+------+-----+-----'   `----+----+----' */
+  [_QWERTY] = LAYOUT_68_ansi(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_INS,  KC_PGUP,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_PGDN,
+    FN2_GRV, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT,          KC_UP,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             MO(1),   KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
   ),
-
-  [_FN1] = LAYOUT_kc(
- /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------.  ,----+----. */
-    GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,   VOLU,HOME,
- /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--|  |ins-`pgup| */
-          ,    ,    , UP ,    ,    ,    ,    ,    ,    ,    ,    , X2 ,      ,   VOLD,END,
- /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---|  `del-`pgdn' */
-           ,    ,LEFT,DOWN,RGHT,    ,    ,    ,    ,    ,    ,    ,          ,
- /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-|  ,----. */
-             ,    ,    ,    ,    ,    ,    ,MUTE,    ,    ,    ,             ,   MUTE,
- /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */
-         ,     ,     ,                              ,      ,     ,     ,    MPRV,MPLY,MNXT
- /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-'   `left+down+rght' */
+  [_FN1] = LAYOUT_68_ansi(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC,          KC_VOLU, KC_HOME,
+    _______, _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, _______,          KC_VOLD, KC_END,
+    _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______,          _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, _______,                   _______,          KC_MUTE,
+    _______, _______, _______,                            _______,                            _______, _______, _______,          KC_MPRV, KC_MPLY, KC_MNXT
   ),
-
-  [_FN2] = LAYOUT_kc(
- /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------.  ,----+----. */
-    GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,   VOLU,HOME,
- /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--|  |ins-`pgup| */
-          ,    ,    , UP ,    ,    ,    , 7  , 8  , 9  ,    ,    ,    ,      ,   VOLD,END,
- /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---|  `del-`pgdn' */
-           ,    ,LEFT,DOWN,RGHT,    ,    , 4  , 5  , 6  ,    ,    ,          ,
- /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-|  ,----. */
-             ,    ,    ,    ,    ,    , 0  , 1  , 2  , 3  ,    ,             ,   MUTE,
- /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */
-         ,     ,     ,                              ,      ,     ,     ,    MPRV,MPLY,MNXT
- /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-'   `left+down+rght' */
+  [_FN2] = LAYOUT_68_ansi(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC,          KC_VOLU, KC_HOME,
+    _______, _______, _______, KC_UP,   _______, _______, _______, KC_7,    KC_8,    KC_9,    _______, _______, _______, _______,          KC_VOLD, KC_END,
+    _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_4,    KC_5,    KC_6,    _______, _______,          _______,
+    _______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    _______,                   _______,          KC_MUTE,
+    _______, _______, _______,                            _______,                            _______, _______, _______,          KC_MPRV, KC_MPLY, KC_MNXT
   )
 };

keyboards/40percentclub/ut47/keymaps/default/config.h

@@ -16,6 +16,4 @@
 
 #pragma once
 
-#include "config_common.h"
-
 // place overrides here

keyboards/alice/alice.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Copyright 2019 Felipe Coury <felipe.coury@gmail.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -21,30 +21,30 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* LAYOUT
  * ┌───┐ ┌───┬───┬───┬───┬───┬───┬───┐         ┌───┬───┬───┬───┬───┬───┬───┬───┐
- * │63 │ │00 │01 │02 │03 │04 │05 │06 │         │07 │08 │09 │10 │11 │12 │13 │14 │
+ * │50 │ │00 │01 │02 │03 │04 │05 │06 │         │07 │08 │09 │0A │0B │0C │0D │0E │
  * ├───┤ ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┘       ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
- * │64 │ │15   │16 │17 │18 │19 │20 │         │21 │22 │23 │24 │25 │26 │27 │28   │
+ * │51 │ │10   │11 │12 │13 │14 │15 │         │16 │17 │18 │19 │1A │1B │1C │1D   │
  * ├───┤ ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┐        └┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
- * │65 │ │29    │30 │31 │32 │33 │34 │         │35 │36 │37 │38 │39 │40 │41      │
+ * │52 │ │20    │21 │22 │23 │24 │25 │         │26 │27 │28 │29 │2A │2B │2C      │
  * └───┘ ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┐     ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
- *       │42      │43 │44 │45 │46 │47 │     │48 │49 │50 │51 │52 │53 │54    │55 │
+ *       │30      │31 │32 │33 │34 │35 │     │36 │37 │38 │39 │4A │4B │4C    │4D │
  *       ├─────┬──┴──┬┴───┴┬──┴───┴┬──┴─┐   ├───┴───┴──┬┴───┴┬──┴───┴────┬─┴───┤
- *       │56   │     │57   │58     │59  │   │60        │61   │           │62   │
+ *       │40   │     │41   │42     │43  │   │46        │47   │           │48   │
  *       └─────┘     └─────┴───────┴────┘   └──────────┴─────┘           └─────┘
  */
 #define LAYOUT( \
-  K63,   K00, K01, K02, K03, K04, K05, K06,      K07, K08, K09, K10, K11, K12, K13, K14, \
-  K64,   K15, K16, K17, K18, K19, K20,      K21, K22, K23, K24, K25, K26, K27, K28,      \
-  K65,   K29, K30, K31, K32, K33, K34,      K35, K36, K37, K38, K39, K40,      K41,      \
-         K42, K43, K44, K45, K46, K47,      K48, K49, K50, K51, K52, K53, K54, K55,      \
-         K56,      K57,      K58, K59,           K60,      K61,                K62       \
+  K50,   K00, K01, K02, K03, K04, K05, K06,      K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+  K51,   K10, K11, K12, K13, K14, K15,      K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+  K52,   K20, K21, K22, K23, K24, K25,      K26, K27, K28, K29, K2A, K2B,      K2C,      \
+         K30, K31, K32, K33, K34, K35,      K36, K37, K38, K39, K4A, K4B, K4C, K4D,      \
+         K40,      K41,      K42, K43,           K46,      K47,                K48       \
 ) \
 { \
-  { K00  , K01  , K02  , K03  , K04  , K05  , K06  , K07  , K08  , K09  , K10  , K11  , K12  , K13  , K14   }, \
-  { K15  , K16  , K17  , K18  , K19  , K20  , K21  , K22  , K23  , K24  , K25  , K26  , K27  , K28  , KC_NO }, \
-  { K29  , K30  , K31  , K32  , K33  , K34  , K35  , K36  , K37  , K38  , K39  , K40  , K41  , KC_NO, KC_NO }, \
-  { K42  , K43  , K44  , K45  , K46  , K47  , K48  , K49  , K50  , K51  , K52  , K53  , K54  , K55  , KC_NO }, \
-  { K56  , K57  , K58  , K59  , KC_NO, KC_NO, K60  , K61  , K62  , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
-  { K63  , K64  , K65  , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }  \
+  { K00  , K01  , K02  , K03  , K04  , K05  , K06  , K07  , K08  , K09  , K0A  , K0B  , K0C  , K0D  , K0E   }, \
+  { K10  , K11  , K12  , K13  , K14  , K15  , K16  , K17  , K18  , K19  , K1A  , K1B  , K1C  , K1D  , KC_NO }, \
+  { K20  , K21  , K22  , K23  , K24  , K25  , K26  , K27  , K28  , K29  , K2A  , K2B  , K2C  , KC_NO, KC_NO }, \
+  { K30  , K31  , K32  , K33  , K34  , K35  , K36  , K37  , K38  , K39  , K4A  , K4B  , K4C  , K4D  , KC_NO }, \
+  { K40  , K41  , K42  , K43  , KC_NO, KC_NO, K46  , K47  , K48  , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+  { K50  , K51  , K52  , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }  \
 }
 

keyboards/amj96/keymaps/default/config.h

@@ -14,11 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
-#include "config_common.h"
 
 // place overrides here
-
-#endif

keyboards/amjpad/keymaps/default/keymap.c

@@ -1,9 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them

keyboards/atomic/readme.md

@@ -3,7 +3,7 @@ Atomic
 
 ![Atomic](http://i.imgur.com/3gNDJAh.jpg)
 
-A compact 60% (15x5) ortholinear keyboard kit made and sold by OLKB. [More info on qmk.fm](http://qmk.fm/atomic/)
+A compact 60% (15x5) ortholinear keyboard kit made and sold by OLKB.
 
 Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert)  
 Hardware Supported: Atomic PCB rev1, Teensy 2.0  

keyboards/atreus/keymaps/dvorak_42_key/keymap.c

@@ -8,6 +8,21 @@
 #define COMBINED  3
 #define BROWSER_CONTROL 4
 
+// aliases
+// shell
+#define SHELL_DEL_WORD RCTL(KC_W)
+// android studio
+
+#define AS_TABLEFT LALT(KC_LEFT)
+#define AS_TABRIGHT LALT(KC_RIGHT)
+#define AS_SYMBOL LCTL(LALT(KC_N))
+#define AS_CLASS LCTL(KC_N)
+#define AS_FINDUSAGE LALT(KC_F7)
+#define AS_BACK LCTL(LALT(KC_LEFT))
+#define AS_GO_DECLARATION LCTL(KC_B)
+#define AS_GO_IMPLEMENTATION LCTL(LALT(KC_B))
+#define AS_CLOSETAB LCTL(KC_F4)
+#define AS_CLOSETOOLWINDOW LCTL(LSFT(KC_F4))
 
 enum custom_keycodes {
   PLACEHOLDER = SAFE_RANGE, // can always be here
@@ -37,10 +52,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [KEYNAV] = LAYOUT(
-    KC_ESC,      CLOUD9_GOTO_LINE,   RCTL(KC_Z),      RCTL(KC_S),       MEH(KC_F10),                         KC_TRNS,       KC_HOME,    KC_UP,           KC_END,     KC_PGUP,
-    MEH(KC_F11), CLOUD9_GOTO_SYMBOL, RSFT(KC_TAB),    KC_TAB,           MEH(KC_A),                           LCTL(KC_LEFT), KC_LEFT,    KC_DOWN,         KC_RIGHT,   LCTL(KC_RIGHT),
-    MEH(KC_B),   CLOUD9_NAVIGATE,    CLOUD9_TAB_LEFT, CLOUD9_TAB_RIGHT, CLOUD9_TAB_CLOSE,                    KC_TRNS,       RCTL(KC_C), RCTL(KC_X),      RCTL(KC_V), KC_PGDOWN,
-    KC_TRNS,     KC_TRNS,            KC_TRNS,         KC_TRNS,          KC_TRNS,          KC_TRNS, KC_ENTER, KC_SPACE,      KC_BSPC,    RCTL(KC_BSPC),   KC_DELETE,  LCTL(KC_DELETE)
+    KC_ESC,             AS_GO_IMPLEMENTATION,  RCTL(KC_Z),      RCTL(KC_S),       MEH(KC_A),                           MEH(KC_B),     KC_HOME,    KC_UP,           KC_END,     KC_PGUP,
+    AS_BACK,            AS_SYMBOL,             RSFT(KC_TAB),    KC_TAB,           SHELL_DEL_WORD,                      LCTL(KC_LEFT), KC_LEFT,    KC_DOWN,         KC_RIGHT,   LCTL(KC_RIGHT),
+    AS_FINDUSAGE,       AS_CLASS,              AS_TABLEFT,      AS_TABRIGHT,      AS_CLOSETAB,                         KC_TRNS,       RCTL(KC_C), RCTL(KC_X),      RCTL(KC_V), KC_PGDOWN,
+    AS_CLOSETOOLWINDOW, AS_GO_DECLARATION,     KC_TRNS,         KC_TRNS,          KC_TRNS,          KC_TRNS, KC_ENTER, KC_SPACE,      KC_BSPC,    RCTL(KC_BSPC),   KC_DELETE,  LCTL(KC_DELETE)
   ),
 
   [KEYSEL] = LAYOUT(

keyboards/bpiphany/tiger_lily/keymaps/default/config.h

@@ -1,8 +1,3 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
+#pragma once
 
 // place overrides here
-
-#endif

keyboards/bpiphany/unloved_bastard/keymaps/default/config.h

@@ -14,11 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
+#pragma once
 
 // place overrides here
-
-#endif

keyboards/c39/c39.c

@@ -0,0 +1 @@
+#include "c39.h"

keyboards/c39/c39.h

@@ -0,0 +1,17 @@
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C  \
+  ) { \
+  { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
+  { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \
+  { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }  \
+}
+
+#define LAYOUT_ortho_3x13 LAYOUT

keyboards/c39/config.h

@@ -0,0 +1,89 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA17
+#define PRODUCT_ID      0xCA39
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Maple Computing
+#define PRODUCT         C39
+#define DESCRIPTION     A compact 39 key keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 13
+
+#define MATRIX_ROW_PINS { D1, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D7, E6, C6, D2, D3 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/c39/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "C39", 
+    "url": "", 
+    "maintainer": "Space Cat", 
+    "width": 13.25, 
+    "height": 3, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Back", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"M1", "x":11.25, "y":0}, {"label":"M2", "x":12.25, "y":0}, {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1}, {"label":"Enter", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"label":"M3", "x":11.25, "y":1}, {"label":"M4", "x":12.25, "y":1}, {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"B", "x":4, "y":2}, {"label":"Fn", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":">", "x":9, "y":2}, {"label":"?", "x":10, "y":2}, {"label":"M5", "x":11.25, "y":2}, {"label":"M6", "x":12.25, "y":2}]
+        }
+    }
+}

keyboards/c39/keymaps/default/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+// place overrides here

keyboards/c39/keymaps/default/keymap.c

@@ -0,0 +1,45 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _FN1 1
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   Q  |   W  |   E  |   R  |   T  | Bksp |   Y  |   U  |   I  |   O  |   P  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   A  |   S  |   D  |   F  |   G  | Enter|   H  |   J  |   K  |   L  |   ;  |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   Z  |   X  |   C  |   V  |   B  |  FN1 |   N  |   M  |   ,  |   .  |   /  |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_QWERTY] = LAYOUT(
+    KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC,                KC_Y, KC_U, KC_I,    KC_O,   KC_P,      KC_1, KC_2,
+    KC_A, KC_S, KC_D, KC_F, KC_G, MT(MOD_LSFT, KC_ENT),   KC_H, KC_J, KC_K,    KC_L,   KC_SCLN,   KC_3, KC_4,
+    KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_FN1, KC_SPC),       KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,   KC_5, KC_6
+),
+
+/* FN1
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   1  |   2  |   3  |   4  |   5  | Bksp |   6  |   7  |   8  |   9  |   0  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   4  |   5  |   6  |   +  |      | Enter|      |      |      |      |      |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   7  |   8  |   9  |   0  |      |  FN1 |      |      |      |      |      |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_FN1] = LAYOUT(
+    KC_1, KC_2, KC_3, KC_4,    KC_5,    KC_BSPC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,      KC_1, KC_2,
+    KC_4, KC_5, KC_6, KC_PLUS, _______, KC_ENT,  _______, _______, _______, _______, _______,   KC_3, KC_4,
+    KC_7, KC_8, KC_9, KC_0,    _______, _______, _______, _______, _______, _______, _______,   KC_5, KC_6
+),
+};

keyboards/c39/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for the C39

keyboards/c39/readme.md

@@ -0,0 +1,16 @@
+# C39
+=======
+
+![C39](https://i.imgur.com/KuWIIuW.png)
+
+A compact 39 key keyboard.
+
+Keyboard Maintainer: [Maple Computing]()  
+Hardware Supported: C39 PCB  
+Hardware Availability: [SpaceCat.design](https://spacecat.design)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make c39:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/c39/rules.mk

@@ -0,0 +1,66 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+RGBLIGHT_ENABLE = no        # RGB Enable / Disable

keyboards/candybar/keymaps/default/keymap.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "candybar.h"
+#include QMK_KEYBOARD_H
 
 #define _BL 0
 #define _FL 1
@@ -35,4 +35,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
   KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
   KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
-};
+};

keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -0,0 +1,109 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -0,0 +1,922 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME                  "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                32768
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON                0U
+#define GPIOA_PIN1                  1U
+#define GPIOA_PIN2                  2U
+#define GPIOA_PIN3                  3U
+#define GPIOA_PIN4                  4U
+#define GPIOA_PIN5                  5U
+#define GPIOA_PIN6                  6U
+#define GPIOA_PIN7                  7U
+#define GPIOA_PIN8                  8U
+#define GPIOA_PIN9                  9U
+#define GPIOA_PIN10                 10U
+#define GPIOA_USB_DM                11U
+#define GPIOA_USB_DP                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_PIN15                 15U
+
+#define GPIOB_PIN0                  0U
+#define GPIOB_PIN1                  1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_PIN3                  3U
+#define GPIOB_PIN4                  4U
+#define GPIOB_PIN5                  5U
+#define GPIOB_PIN6                  6U
+#define GPIOB_PIN7                  7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_SPI2_SCK              13U
+#define GPIOB_SPI2_MISO             14U
+#define GPIOB_SPI2_MOSI             15U
+
+#define GPIOC_MEMS_CS               0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_LED_RED               6U
+#define GPIOC_LED_BLUE              7U
+#define GPIOC_LED_ORANGE            8U
+#define GPIOC_LED_GREEN             9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_OSC32_IN              14U
+#define GPIOC_OSC32_OUT             15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_OSC_IN                0U
+#define GPIOF_OSC_OUT               1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
+                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
+                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
+                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
+                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
+                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
+                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
+                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
+                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
+                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
+                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg

@@ -0,0 +1,703 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- STM32F0xx board Template -->
+<board
+  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
+  <configuration_settings>
+    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
+    <output_path>..</output_path>
+    <hal_version>3.0.x</hal_version>
+  </configuration_settings>
+  <board_name>ST STM32F072B-Discovery</board_name>
+  <board_id>ST_STM32F072B_DISCOVERY</board_id>
+  <board_functions></board_functions>
+  <subtype>STM32F072xB</subtype>
+  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
+  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
+  <ports>
+    <GPIOA>
+      <pin0
+        ID="BUTTON"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID="USB_DM"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID="USB_DP"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SWDIO"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SWCLK"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullDown"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOA>
+    <GPIOB>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SPI2_SCK"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SPI2_MISO"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID="SPI2_MOSI"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+    </GPIOB>
+    <GPIOC>
+      <pin0
+        ID="MEMS_CS"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Output"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID="LED_RED"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin7
+        ID="LED_BLUE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin8
+        ID="LED_ORANGE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" ></pin8>
+      <pin9
+        ID="LED_GREEN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID="OSC32_IN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID="OSC32_OUT"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOC>
+    <GPIOD>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOD>
+    <GPIOE>
+    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    </GPIOE>
+    <GPIOF>
+      <pin0
+        ID="OSC_IN"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID="OSC_OUT"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOF>
+  </ports>
+</board>

keyboards/cannonkeys/instant60/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/instant60/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/instant60/config.h

@@ -0,0 +1,92 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0x1600
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER CannonKeys
+#define PRODUCT Instant60
+#define DESCRIPTION Instant 60 Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define MATRIX_COL_PINS { B2, B10, B11, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
+#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 14
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
+
+
+// EEPROM usage
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x01
+#define EEPROM_VERSION_ADDR 34
+
+#define EEPROM_CUSTOM_BACKLIGHT 804
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/instant60/halconf.h

@@ -0,0 +1,354 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/cannonkeys/instant60/instant60.c

@@ -0,0 +1 @@
+#include "instant60.h"

keyboards/cannonkeys/instant60/instant60.h

@@ -0,0 +1,17 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_default( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,          K2E, \
+  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \
+  K40, K41,  K42,              K45,             K49,  K4A,  K4B,  K4E \
+) { \
+  {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,    K0D,   KC_NO}, \
+  {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,    KC_NO, K1E   }, \
+  {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  KC_NO,  KC_NO, K2E  }, \
+  {  K30,  K31,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  KC_NO,  KC_NO, KC_NO  }, \
+  {  K40,  K41,  K42,  KC_NO,  KC_NO,  K45,  KC_NO,  KC_NO,  KC_NO,  K49,  K4A,  K4B,  KC_NO,  KC_NO, K4E  }  \
+}

keyboards/cannonkeys/instant60/keymaps/default/keymap.c

@@ -0,0 +1,48 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_default(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                 KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                 KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,  \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,                 KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                          KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL
+  ),
+
+  [_FN1] = LAYOUT_default(
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, \
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______, \
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, \
+    KC_GRV,  _______, _______,                            _______,                            _______, _______, _______, RESET
+  )
+};

keyboards/cannonkeys/instant60/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/instant60/readme.md

@@ -0,0 +1,12 @@
+# Instant60
+
+Instant60 Keyboard
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1)  
+Hardware Supported: STM32F072CBT6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/instant60:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/instant60/rules.mk

@@ -0,0 +1,56 @@
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+#   comment out to disable the options.
+#
+
+# project specific files
+VPATH += keyboards/cannonkeys/stm32f072
+SRC =	keyboard.c \
+      led.c
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
+RGBLIGHT_ENABLE = yes
+
+# RAW_ENABLE = yes
+# DYNAMIC_KEYMAP_ENABLE = yes
+

keyboards/cannonkeys/stm32f072/keyboard.c

@@ -0,0 +1,120 @@
+#include "keyboard.h"
+#include "ch.h"
+#include "hal.h"
+#include "led_custom.h"
+#include "util.h"
+#include "quantum.h"
+
+#include "tmk_core/common/eeprom.h"
+
+#include "ws2812.h"
+
+backlight_config_t kb_backlight_config = {
+  .enable = true,
+  .breathing = true,
+  .level = BACKLIGHT_LEVELS
+};
+
+
+bool eeprom_is_valid(void)
+{
+	return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
+			eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
+}
+
+void eeprom_set_valid(bool valid)
+{
+	eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
+	eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
+}
+
+void eeprom_reset(void)
+{
+	eeprom_set_valid(false);
+	eeconfig_disable();
+}
+
+void save_backlight_config_to_eeprom(){
+  eeprom_update_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT, kb_backlight_config.raw);
+}
+
+void load_custom_config(){
+  kb_backlight_config.raw = eeprom_read_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT);
+}
+
+void eeprom_init_kb(void)
+{
+	// If the EEPROM has the magic, the data is good.
+	// OK to load from EEPROM.
+	if (eeprom_is_valid()) {
+		load_custom_config();
+	} else	{
+		// Save the magic number last, in case saving was interrupted
+		eeprom_set_valid(true);
+	}
+}
+
+void matrix_init_kb(void){
+  	eeprom_init_kb();
+      /* MOSI pin*/
+    palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(0));
+    wait_ms(500);
+
+#ifdef RGBLIGHT_ENABLE
+    leds_init();
+#endif
+    backlight_init_ports();
+}
+
+void matrix_scan_kb(void)
+{
+  #ifdef RGBLIGHT_ENABLE
+    rgblight_task();
+  #endif
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case BL_INC:
+      if (record->event.pressed) {
+        kb_backlight_config.level = kb_backlight_config.level + 1;
+        if(kb_backlight_config.level > BACKLIGHT_LEVELS){
+          kb_backlight_config.level = BACKLIGHT_LEVELS;
+        }
+        backlight_set(kb_backlight_config.level);
+        save_backlight_config_to_eeprom();
+      }
+      return false;
+    case BL_TOGG:
+      if (record->event.pressed) {
+        kb_backlight_config.enable = !kb_backlight_config.enable;
+        if(kb_backlight_config.enable){
+          backlight_set(kb_backlight_config.level);
+        } else {
+          backlight_set(0);
+        }
+        save_backlight_config_to_eeprom();
+      }
+      return false;
+
+    case BL_DEC:
+      if (record->event.pressed) {
+        if(kb_backlight_config.level <= 1){
+          kb_backlight_config.level = 0;
+        } else {
+          kb_backlight_config.level = kb_backlight_config.level - 1;
+        }
+        backlight_set(kb_backlight_config.level);
+        save_backlight_config_to_eeprom();
+      }
+      return false;
+    case BL_BRTG:
+      if (record->event.pressed) {
+        kb_backlight_config.breathing = !kb_backlight_config.breathing;
+        breathing_toggle();
+        save_backlight_config_to_eeprom();
+      }
+      return false;
+  }
+  return true;
+}

keyboards/cannonkeys/stm32f072/keyboard.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#include "quantum.h"
+
+typedef union {
+    uint8_t raw;
+    struct {
+        bool    enable :1;
+        bool    breathing : 1;
+        uint8_t level  :6;
+    };
+} backlight_config_t;
+
+// Backlighting
+extern backlight_config_t kb_backlight_config;
+extern bool kb_backlight_breathing;
+void backlight_init_ports(void);
+void backlight_set(uint8_t level);
+bool is_breathing(void);
+void breathing_enable(void);
+void breathing_disable(void);
+void load_custom_config(void);
+void save_backlight_config_to_eeprom(void);

keyboards/cannonkeys/stm32f072/led.c

@@ -0,0 +1,252 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+#include "led_custom.h"
+#include "keyboard.h"
+#include "printf.h"
+
+static void breathing_callback(PWMDriver *pwmp);
+
+static PWMConfig pwmCFG = {
+  0xFFFF,                              /* PWM clock frequency  */
+  256,                              /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
+  NULL,                               /* No Callback */
+  {
+      {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL}
+  },
+  0,                                  /* HW dependent part.*/
+  0
+};
+
+static PWMConfig pwmCFG_breathing = {
+  0xFFFF,                              /* 10kHz PWM clock frequency  */
+  256,                              /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
+  breathing_callback,                               /* Breathing Callback */
+  {
+      {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL}
+  },
+  0,                                  /* HW dependent part.*/
+  0
+};
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+  if (v <= 5243) // if below 8% of max
+    return v / 9; // same as dividing by 900%
+  else {
+    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+    // to get a useful result with integer division, we shift left in the expression above
+    // and revert what we've done again after squaring.
+    y = y * y * y >> 8;
+    if (y > 0xFFFFUL) // prevent overflow
+      return 0xFFFFU;
+    else
+      return (uint16_t) y;
+  }
+}
+
+
+uint8_t get_backlight_level(void){
+  return kb_backlight_config.level;
+}
+
+void backlight_init_ports(void) {
+  printf("backlight_init_ports()\n");
+  palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1));
+  pwmStart(&PWMD3, &pwmCFG);
+  // pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3, 0xFFFF,cie_lightness(0xFFFF)));
+  if(kb_backlight_config.enable){
+    if(kb_backlight_config.breathing){
+      breathing_enable();
+    } else{
+      backlight_set(kb_backlight_config.level);
+    }
+  } else {
+    backlight_set(0);
+  }
+
+}
+
+void backlight_set(uint8_t level) {
+    printf("backlight_set(%d)\n", level);
+    uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS));
+    printf("duty: (%d)\n", duty);
+    if (level == 0) {
+        // Turn backlight off
+        pwmDisableChannel(&PWMD3, 0);
+    } else {
+      // Turn backlight on
+      if(!is_breathing()){
+        pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3,0xFFFF,duty));
+      }
+    }
+}
+
+
+uint8_t backlight_tick = 0;
+
+void backlight_task(void) {
+}
+
+#define BREATHING_NO_HALT  0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON  2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+bool is_breathing(void) {
+    return PWMD3.config == &pwmCFG_breathing;
+}
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0)
+
+
+void breathing_interrupt_enable(void){
+    pwmStop(&PWMD3);
+    pwmStart(&PWMD3, &pwmCFG_breathing);
+    chSysLockFromISR();
+    pwmEnablePeriodicNotification(&PWMD3);
+    pwmEnableChannelI(
+      &PWMD3,
+      0,
+      PWM_FRACTION_TO_WIDTH(
+        &PWMD3,
+        0xFFFF,
+        0xFFFF
+      )
+    );
+    chSysUnlockFromISR();
+}
+
+void breathing_interrupt_disable(void){
+    pwmStop(&PWMD3);
+    pwmStart(&PWMD3, &pwmCFG);
+}
+
+void breathing_enable(void)
+{
+  breathing_counter = 0;
+  breathing_halt = BREATHING_NO_HALT;
+  breathing_interrupt_enable();
+}
+
+void breathing_pulse(void)
+{
+    if (get_backlight_level() == 0)
+      breathing_min();
+    else
+      breathing_max();
+    breathing_halt = BREATHING_HALT_ON;
+    breathing_interrupt_enable();
+}
+
+void breathing_disable(void)
+{
+    printf("breathing_disable()\n");
+    breathing_interrupt_disable();
+    // Restore backlight level
+    backlight_set(get_backlight_level());
+}
+
+void breathing_self_disable(void)
+{
+  if (get_backlight_level() == 0)
+    breathing_halt = BREATHING_HALT_OFF;
+  else
+    breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+  if (is_breathing()){
+    printf("disable breathing\n");
+    breathing_disable();
+  } else {
+    printf("enable breathing\n");
+    breathing_enable();
+  }
+}
+
+void breathing_period_set(uint8_t value)
+{
+  if (!value)
+    value = 1;
+  breathing_period = value;
+}
+
+void breathing_period_default(void) {
+  breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+  breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+  breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+  return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+static void breathing_callback(PWMDriver *pwmp)
+{
+  (void)pwmp;
+  uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS;
+  // resetting after one period to prevent ugly reset at overflow.
+  breathing_counter = (breathing_counter + 1) % (breathing_period * 256);
+  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+  {
+      breathing_interrupt_disable();
+  }
+
+  uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256));
+
+  chSysLockFromISR();
+  pwmEnableChannelI(
+    &PWMD3,
+    0,
+    PWM_FRACTION_TO_WIDTH(
+      &PWMD3,
+      0xFFFF,
+      duty
+    )
+  );
+  chSysUnlockFromISR();
+}

keyboards/cannonkeys/stm32f072/led_custom.h

@@ -0,0 +1,6 @@
+#pragma once
+
+void backlight_task(void);
+void breathing_interrupt_disable(void);
+void breathing_interrupt_enable(void);
+void breathing_toggle(void);

keyboards/cannonkeys/stm32f072/ws2812.c

@@ -0,0 +1,150 @@
+#include "ch.h"
+#include "hal.h"
+
+#include "ws2812.h"
+
+#define BYTES_FOR_LED_BYTE 4
+#define NB_COLORS 3
+#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS
+#define DATA_SIZE BYTES_FOR_LED*NB_LEDS
+#define RESET_SIZE 200
+
+// Define the spi your LEDs are plugged to here
+#define LEDS_SPI WS2812_SPI
+// Define the number of LEDs you wish to control in your LED strip
+#define NB_LEDS RGBLED_NUM
+
+#define LED_SPIRAL 0
+
+static uint8_t txbuf[DATA_SIZE + RESET_SIZE];
+static uint8_t get_protocol_eq(uint8_t data, int pos);
+
+/*
+ * This lib is meant to be used asynchronously, thus the colors contained in
+ * the txbuf will be sent in loop, so that the colors are always the ones you
+ * put in the table (the user thus have less to worry about)
+ *
+ * Since the data are sent via DMA, and the call to spiSend is a blocking one,
+ * the processor ressources are not used to much, if you see your program being
+ * too slow, simply add a:
+ * chThdSleepMilliseconds(x);
+ * after the spiSend, where you increment x untill you are satisfied with your
+ * program speed, another trick may be to lower this thread priority : your call
+ */
+static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
+static THD_FUNCTION(ledsThread, arg) {
+  (void) arg;
+  while(1){
+    spiSend(&LEDS_SPI, DATA_SIZE + RESET_SIZE, txbuf);
+  }
+}
+
+#if LED_SPIRAL
+/*
+ * 'Led spiral' is a simple demo in which we put all the leds to the same
+ * color, where this color does all the hsv circle in loop.
+ * If you want to launch the thread that will chage the led colors to the
+ * appropriate value, simply set LED_SPIRAL to 1.
+ */
+
+static THD_WORKING_AREA(HSVTRANS_WA, 128);
+static THD_FUNCTION(hsv_transThread, arg) {
+  (void) arg;
+  hsv_color color = {0, 255, 255};
+  while(1){
+    color.h += 1;
+    color.h %= 256;
+    set_leds_color_hsv(color);
+    chThdSleepMilliseconds(50);
+  }
+}
+#endif
+
+static const SPIConfig spicfg = {
+  NULL,
+  GPIOB,
+  15,
+  SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us
+};
+
+/*
+ * Function used to initialize the driver.
+ *
+ * Starts by shutting off all the LEDs.
+ * Then gets access on the LED_SPI driver.
+ * May eventually launch an animation on the LEDs (e.g. a thread setting the
+ * txbuff values)
+ */
+void leds_init(void){
+  for(int i = 0; i < RESET_SIZE; i++)
+    txbuf[DATA_SIZE+i] = 0x00;
+  spiAcquireBus(&LEDS_SPI);              /* Acquire ownership of the bus.    */
+  spiStart(&LEDS_SPI, &spicfg);          /* Setup transfer parameters.       */
+  spiSelect(&LEDS_SPI);                  /* Slave Select assertion.          */
+  chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
+#if LED_SPIRAL
+  chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA),
+      NORMALPRIO, hsv_transThread, NULL);
+#endif
+}
+
+/*
+ * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
+ * the ws2812b protocol, we use this helper function to translate bytes into
+ * 0s and 1s for the LED (with the appropriate timing).
+ */
+static uint8_t get_protocol_eq(uint8_t data, int pos){
+  uint8_t eq = 0;
+  if (data & (1 << (2*(3-pos))))
+    eq = 0b1110;
+  else
+    eq = 0b1000;
+  if (data & (2 << (2*(3-pos))))
+    eq += 0b11100000;
+  else
+    eq += 0b10000000;
+  return eq;
+}
+
+//
+///*
+// * If you want to set a LED's color in the RGB color space, simply call this
+// * function with a hsv_color containing the desired color and the index of the
+// * led on the LED strip (starting from 0, the first one being the closest the
+// * first plugged to the board)
+// *
+// * Only set the color of the LEDs through the functions given by this API
+// * (unless you really know what you are doing)
+// */
+void set_led_color_rgb(LED_TYPE color, int pos){
+  for(int j = 0; j < 4; j++)
+    txbuf[BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
+  for(int j = 0; j < 4; j++)
+    txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j);
+  for(int j = 0; j < 4; j++)
+    txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
+}
+
+
+void WS2812_init(void) {
+ leds_init();
+}
+
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
+ uint8_t i = 0;
+ while (i < number_of_leds) {
+   set_led_color_rgb(ledarray[i], i);
+   i++;
+ }
+}
+
+
+void set_leds_color_rgb(LED_TYPE color){
+ for(int i = 0; i < NB_LEDS; i++)
+   set_led_color_rgb(color, i);
+}
+
+
+void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds) {
+
+}

keyboards/cannonkeys/stm32f072/ws2812.h

@@ -0,0 +1,20 @@
+#pragma once
+
+#include "hal.h"
+#include "rgblight_types.h"
+
+
+void set_leds_color_rgb(LED_TYPE color);
+void set_led_color_rgb(LED_TYPE color, int pos);
+void leds_init(void);
+
+
+ // This is what users will use to interface with this
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
+void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
+
+
+void WS2812_init(void);
+void WS2812_set_color( uint8_t index, uint8_t red, uint8_t green, uint8_t blue );
+void WS2812_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void WS2812_send_colors(void);

keyboards/chibios_test/keymaps/default/keymap.c

@@ -15,7 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "chibios_test.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     {{KC_CAPS}}, // test with KC_CAPS, KC_A, RESET

keyboards/christmas_tree/keymaps/default/config.h

@@ -1,6 +1,3 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
-#include "../../config.h"
-
-#endif
+// place overrides here

keyboards/ckeys/obelus/keymaps/default/config.h

@@ -1,6 +1,3 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
-#include "../../config.h"
-// Add overrides here 
-#endif
+// place overrides here

keyboards/ckeys/obelus/keymaps/default/keymap.c

@@ -1,7 +1,4 @@
 #include QMK_KEYBOARD_H
-#ifdef AUDIO_ENABLE
-  #include "audio.h"
-#endif
 
 extern keymap_config_t keymap_config;
 

keyboards/clueboard/2x1800/keymaps/default/config.h

@@ -16,6 +16,4 @@
 
 #pragma once
 
-#include "config_common.h"
-
 // place overrides here

keyboards/clueboard/66_hotswap/gen1/config.h

@@ -80,11 +80,6 @@
  */
 //#define FORCE_NKRO
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/comet46/keymaps/default/config.h

@@ -18,14 +18,12 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
+
+// place overrides here
 
-// #include "../../config.h"
 
 /* Use I2C or Serial */
 
 #define USE_I2C
 #define SSD1306OLED
-
-#endif

keyboards/contra/keymaps/default/config.h

@@ -1,7 +1,5 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
-#include "config_common.h"
 
 #ifdef AUDIO_ENABLE
     #define STARTUP_SONG SONG(PLANCK_SOUND)
@@ -25,7 +23,7 @@
 /* enable basic MIDI features:
    - MIDI notes can be sent when in Music mode is on
 */
-                                
+
 #define MIDI_BASIC
 
 /* enable advanced MIDI features:
@@ -38,5 +36,3 @@
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 2
-
-#endif

keyboards/contra/keymaps/msiu/config.h

@@ -0,0 +1,37 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+                                
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2

keyboards/contra/keymaps/msiu/keymap.c

@@ -0,0 +1,175 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _NUMB,
+  _FUNC,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  DVORAK,
+  LOWER,
+  RAISE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,------------------------------------------------------------------------------------------.
+   * | Tab / Numb  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |-------------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Esc / Ctrl  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * |-------------+------+------+------+------+------|------+------+------+------+------+------|
+   * | Shift       |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Ctrl        |Hyper | Alt  | GUI  |Lower | Func |Space |Raise | Left | Down |  Up  |Right |
+   * `------------------------------------------------------------------------------------------'
+   */
+  [_QWERTY] = LAYOUT_ortho_4x12(
+    LT(_NUMB, KC_TAB),   KC_Q,    KC_W,    KC_E,    KC_R,  KC_T,      KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC,
+    LCTL_T(KC_ESC),      KC_A,    KC_S,    KC_D,    KC_F,  KC_G,      KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT,             KC_Z,    KC_X,    KC_C,    KC_V,  KC_B,      KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+    KC_LCTL,             KC_HYPR, KC_LALT, KC_LGUI, LOWER, MO(_FUNC), KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+  /* Dvorak
+   * ,-----------------------------------------------------------------------------------.
+   * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_DVORAK] = LAYOUT_ortho_4x12(
+    _______, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,     KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    _______,
+    _______, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,     KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    _______, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,     KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    _______,
+    _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+  /* Lower
+   * ,-----------------------------------------------------------------------------------.
+   * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT_ortho_4x12(
+    KC_TILD, KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+    _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE,
+    _______, _______,  _______, _______, _______, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
+  ),
+
+  /* Raise
+   * ,-----------------------------------------------------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_RAISE] = LAYOUT_ortho_4x12(
+    KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    _______, KC_4,    KC_5,    KC_6,   KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_7,    KC_8,    KC_9,   KC_MINS, KC_F11,  KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE,
+    _______, _______, _______, _______, _______, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
+  ),
+
+  /* Adjust (Lower + Raise)
+   * ,-----------------------------------------------------------------------------------.
+   * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |             |      |      |      |      |      |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_ADJUST] = LAYOUT_ortho_4x12(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, QWERTY,  DVORAK,  _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET
+  ),
+
+  [_FUNC] = LAYOUT_ortho_4x12(
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, KC_PSCR, _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+  [_NUMB] = LAYOUT_ortho_4x12(
+    _______, _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9,    _______, KC_BSPC,
+    _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6,    _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_1,    KC_2,    KC_3,    _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_0,    _______, _______, _______
+  )
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        // print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/contra/keymaps/msiu/readme.md

@@ -0,0 +1,2 @@
+# The Default Contra Layout
+

keyboards/converter/usb_usb/keymaps/default/config.h

@@ -1,6 +1,3 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
-#include "../../config.h"
-
-#endif
+// place overrides here

keyboards/cospad/keymaps/default/keymap.c

@@ -1,10 +1,6 @@
 #include QMK_KEYBOARD_H
 #include "led.h"
 
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them

keyboards/cu24/keymaps/default/keymap.c

@@ -13,7 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "cu24.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_grid( /* Base */

keyboards/cu75/keymaps/default/config.h

@@ -1,8 +1,3 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
+#pragma once
 
 // place overrides here
-
-#endif

keyboards/deltasplit75/keymaps/default/config.h

@@ -16,16 +16,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 
+#pragma once
+
 #define USE_SERIAL
 
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
-
-
-#ifdef SUBPROJECT_v2
-    #include "../../v2/config.h"
-#endif
-#ifdef SUBPROJECT_protosplit
-    #include "../../protosplit/config.h"
-#endif

keyboards/dichotomy/keymaps/default/keymap.c

@@ -1,7 +1,7 @@
 // this is the style you want to emulate.
 // This is the canonical layout file for the Quantum project. If you want to add another keyboard,
 
-#include "dichotomy.h"
+#include QMK_KEYBOARD_H
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.

keyboards/diverge3/keymaps/default/config.h

@@ -14,14 +14,9 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
+#pragma once
 
 // place overrides here
 #define MASTER_RIGHT
 #define PERMISSIVE_HOLD
 #define TAPPING_TERM 150
-
-#endif

keyboards/dk60/dk60.c

@@ -1,5 +1,15 @@
 #include "dk60.h"
 
+extern inline void dk60_caps_led_on(void);
+extern inline void dk60_esc_led_on(void);
+
+extern inline void dk60_caps_led_off(void);
+extern inline void dk60_esc_led_off(void);
+
+extern inline void dk60_led_all_on(void);
+extern inline void dk60_led_all_off(void);
+
+
 void dk60_blink_all_leds(void)
 {
     dk60_led_all_off();

keyboards/do60/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-#include "action_layer.h"
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 

keyboards/dozen0/config.h

@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-/*#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)*/
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/ergodash/rev1/keymaps/default/config.h

@@ -18,10 +18,9 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
-#include "../../config.h"
+// place overrides here
 
 /* Use I2C or Serial, not both */
 
@@ -34,8 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-#endif
-
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 24

keyboards/ergodash/rev1/keymaps/default/keymap.c

@@ -1,6 +1,4 @@
 #include QMK_KEYBOARD_H
-#include "action_layer.h"
-#include "eeconfig.h"
 
 extern keymap_config_t keymap_config;
 

keyboards/ergodash/rev2/keymaps/default/config.h

@@ -18,10 +18,9 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
-#include "../../config.h"
+// place overrides here
 
 /* Use I2C or Serial, not both */
 
@@ -34,7 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-#endif
 
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS

keyboards/ergodash/rev2/keymaps/default/keymap.c

@@ -1,6 +1,4 @@
 #include QMK_KEYBOARD_H
-#include "action_layer.h"
-#include "eeconfig.h"
 
 extern keymap_config_t keymap_config;
 

keyboards/ergodone/keymaps/default/keymap.c

@@ -1,6 +1,4 @@
 #include QMK_KEYBOARD_H
-#include "debug.h"
-#include "action_layer.h"
 #include "version.h"
 
 #define BASE 0 // default layer

keyboards/ergodox_ez/ergodox_ez.c

@@ -269,69 +269,68 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 };
 
 
-__attribute__ ((weak))
 const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
 
     /*{row | col << 4}
       |             {x=0..224, y=0..64}
       |              |                    modifier
       |              |                    | */
-    {{0|(0<<4)},   {24.9*5, 16*0}, 0}, // LED 1 on right
-    {{0|(1<<4)},   {24.9*6, 16*0}, 0}, // LED 2
-    {{0|(2<<4)},   {24.9*7, 16*0}, 0}, // LED 3
-    {{0|(3<<4)},   {24.9*8, 16*0}, 0}, // LED 4
-    {{0|(4<<4)},   {24.9*9, 16*0}, 0}, // LED 5
+    {{ 8|(0<<4)},   {17.2* 8, 12.8*0}, 0}, // LED 1 on right > Key 6
+    {{ 9|(0<<4)},   {17.2* 9, 12.8*0}, 0}, // LED 2 > Key 7
+    {{10|(0<<4)},   {17.2*10, 12.8*0}, 0}, // LED 3 > Key 8
+    {{11|(0<<4)},   {17.2*11, 12.8*0}, 0}, // LED 4 > Key 9
+    {{12|(0<<4)},   {17.2*12, 12.8*0}, 0}, // LED 5 > Key 0
 
-    {{1|(5<<4)},   {24.9*5, 16*1}, 0}, // LED 6
-    {{1|(6<<4)},   {24.9*6, 16*1}, 0}, // LED 7
-    {{1|(7<<4)},   {24.9*7, 16*1}, 0}, // LED 8
-    {{1|(8<<4)},   {24.9*8, 16*1}, 0}, // LED 9
-    {{1|(9<<4)},   {24.9*9, 16*1}, 0}, // LED 10
+    {{ 8|(1<<4)},   {17.2* 8, 12.8*1}, 0}, // LED 6
+    {{ 9|(1<<4)},   {17.2* 9, 12.8*1}, 0}, // LED 7
+    {{10|(1<<4)},   {17.2*10, 12.8*1}, 0}, // LED 8
+    {{11|(1<<4)},   {17.2*11, 12.8*1}, 0}, // LED 9
+    {{12|(1<<4)},   {17.2*12, 12.8*1}, 0}, // LED 10
 
-    {{2|(5<<4)},   {24.9*5, 16*2}, 0}, // LED 11
-    {{2|(6<<4)},   {24.9*6, 16*2}, 0}, // LED 12
-    {{2|(7<<4)},   {24.9*7, 16*2}, 0}, // LED 13
-    {{2|(8<<4)},   {24.9*8, 16*2}, 0}, // LED 14
-    {{2|(9<<4)},   {24.9*9, 16*2}, 0}, // LED 15
+    {{ 8|(2<<4)},   {17.2* 8, 12.8*2}, 0}, // LED 11
+    {{ 9|(2<<4)},   {17.2* 9, 12.8*2}, 0}, // LED 12
+    {{10|(2<<4)},   {17.2*10, 12.8*2}, 0}, // LED 13
+    {{11|(2<<4)},   {17.2*11, 12.8*2}, 0}, // LED 14
+    {{12|(2<<4)},   {17.2*12, 12.8*2}, 0}, // LED 15
 
-    {{3|(5<<4)},   {24.9*5, 16*2}, 0}, // LED 16
-    {{3|(6<<4)},   {24.9*6, 16*2}, 0}, // LED 17
-    {{3|(7<<4)},   {24.9*7, 16*2}, 0}, // LED 18
-    {{3|(8<<4)},   {24.9*8, 16*2}, 0}, // LED 19
-    {{3|(9<<4)},   {24.9*9, 16*2}, 0}, // LED 20
+    {{ 8|(3<<4)},   {17.2* 8, 12.8*3}, 0}, // LED 16
+    {{ 9|(3<<4)},   {17.2* 9, 12.8*3}, 0}, // LED 17
+    {{10|(3<<4)},   {17.2*10, 12.8*3}, 0}, // LED 18
+    {{11|(3<<4)},   {17.2*11, 12.8*3}, 0}, // LED 19
+    {{12|(3<<4)},   {17.2*12, 12.8*3}, 0}, // LED 20
 
-    {{4|(6<<4)},   {24.9*6, 16*2}, 0}, // LED 21
-    {{4|(7<<4)},   {24.9*7, 16*2}, 0}, // LED 22
-    {{4|(8<<4)},   {24.9*8, 16*2}, 0}, // LED 23
-    {{4|(9<<4)},   {24.9*9, 16*2}, 0}, // LED 24
+    {{ 9|(4<<4)},   {17.2* 9, 12.8*4}, 1}, // LED 21
+    {{10|(4<<4)},   {17.2*10, 12.8*4}, 1}, // LED 22
+    {{11|(4<<4)},   {17.2*11, 12.8*4}, 1}, // LED 23
+    {{12|(4<<4)},   {17.2*12, 12.8*4}, 1}, // LED 24
 
-    {{0|(0<<4)},   {24.9*4, 16*0}, 0}, // LED 1 on left
-    {{0|(1<<4)},   {24.9*3, 16*0}, 0}, // LED 2
-    {{0|(2<<4)},   {24.9*2, 16*0}, 0}, // LED 3
-    {{0|(3<<4)},   {24.9*1, 16*0}, 0}, // LED 4
-    {{0|(4<<4)},   {24.9*0, 16*0}, 0}, // LED 5
+    {{ 5|(0<<4)},   {17.2* 5, 12.8*0}, 0}, // LED 1 on left > Key 5
+    {{ 4|(0<<4)},   {17.2* 4, 12.8*0}, 0}, // LED 2 > Key 4
+    {{ 3|(0<<4)},   {17.2* 3, 12.8*0}, 0}, // LED 3 > Key 3
+    {{ 2|(0<<4)},   {17.2* 2, 12.8*0}, 0}, // LED 4 > Key 2
+    {{ 1|(0<<4)},   {17.2* 1, 12.8*0}, 0}, // LED 5 > Key 1
 
-    {{1|(5<<4)},   {24.9*4, 16*1}, 0}, // LED 6
-    {{1|(6<<4)},   {24.9*3, 16*1}, 0}, // LED 7
-    {{1|(7<<4)},   {24.9*2, 16*1}, 0}, // LED 8
-    {{1|(8<<4)},   {24.9*1, 16*1}, 0}, // LED 9
-    {{1|(9<<4)},   {24.9*0, 16*1}, 0}, // LED 10
+    {{ 5|(1<<4)},   {17.2* 5, 12.8*1}, 0}, // LED 6
+    {{ 4|(1<<4)},   {17.2* 4, 12.8*1}, 0}, // LED 7
+    {{ 3|(1<<4)},   {17.2* 3, 12.8*1}, 0}, // LED 8
+    {{ 2|(1<<4)},   {17.2* 2, 12.8*1}, 0}, // LED 9
+    {{ 1|(1<<4)},   {17.2* 1, 12.8*1}, 0}, // LED 10
 
-    {{2|(5<<4)},   {24.9*4, 16*2}, 0}, // LED 11
-    {{2|(6<<4)},   {24.9*3, 16*2}, 0}, // LED 12
-    {{2|(7<<4)},   {24.9*2, 16*2}, 0}, // LED 13
-    {{2|(8<<4)},   {24.9*1, 16*2}, 0}, // LED 14
-    {{2|(9<<4)},   {24.9*0, 16*2}, 0}, // LED 15
+    {{ 5|(2<<4)},   {17.2* 5, 12.8*2}, 0}, // LED 11
+    {{ 4|(2<<4)},   {17.2* 4, 12.8*2}, 0}, // LED 12
+    {{ 3|(2<<4)},   {17.2* 3, 12.8*2}, 0}, // LED 13
+    {{ 2|(2<<4)},   {17.2* 2, 12.8*2}, 0}, // LED 14
+    {{ 1|(2<<4)},   {17.2* 1, 12.8*2}, 0}, // LED 15
 
-    {{3|(5<<4)},   {24.9*4, 16*2}, 0}, // LED 16
-    {{3|(6<<4)},   {24.9*3, 16*2}, 0}, // LED 17
-    {{3|(7<<4)},   {24.9*2, 16*2}, 0}, // LED 18
-    {{3|(8<<4)},   {24.9*1, 16*2}, 0}, // LED 19
-    {{3|(9<<4)},   {24.9*0, 16*2}, 0}, // LED 20
+    {{ 5|(3<<4)},   {17.2* 5, 12.8*3}, 0}, // LED 16
+    {{ 4|(3<<4)},   {17.2* 4, 12.8*3}, 0}, // LED 17
+    {{ 3|(3<<4)},   {17.2* 3, 12.8*3}, 0}, // LED 18
+    {{ 2|(3<<4)},   {17.2* 2, 12.8*3}, 0}, // LED 19
+    {{ 1|(3<<4)},   {17.2* 1, 12.8*3}, 0}, // LED 20
 
-    {{4|(6<<4)},   {24.9*3, 16*2}, 0}, // LED 21
-    {{4|(7<<4)},   {24.9*2, 16*2}, 0}, // LED 22
-    {{4|(8<<4)},   {24.9*1, 16*2}, 0}, // LED 23
-    {{4|(9<<4)},   {24.9*0, 16*2}, 0}, // LED 24
+    {{ 4|(4<<4)},   {17.2* 4, 12.8*4}, 1}, // LED 21
+    {{ 3|(4<<4)},   {17.2* 3, 12.8*4}, 1}, // LED 22
+    {{ 2|(4<<4)},   {17.2* 2, 12.8*4}, 1}, // LED 23
+    {{ 1|(4<<4)},   {17.2* 1, 12.8*4}, 1}, // LED 24 > Key Hack
 };
 #endif

keyboards/ergodox_ez/keymaps/dvorak_42_key/keymap.c

@@ -55,14 +55,16 @@ enum custom_keycodes {
 };
 
 
-#define BASE         0 // base dvorak layer
-#define KEYNAV       1 // arrow navigation (right hand)
-#define KEYSEL       2 // arrow navigation + shift (allow text selection)
-#define SHELL_NAV    3 // bash shortcuts
-#define SHELL_SCREEN 4 // linux screen shortcuts
-#define SCREEN_NAV   5 // navigate between linux screen tabs 
-#define BROWSER_CONTROL 6 // control browser and mouse
-#define COMBINED      	7 // combined numbers and symbols layer
+#define BASE             0 // base dvorak layer
+#define BASE_ALTERNATE   1 // base dvorak layer, with different layer toggling
+#define KEYNAV           2 // arrow navigation (right hand)
+#define KEYSEL           3 // arrow navigation + shift (allow text selection)
+#define SHELL_NAV        4 // bash shortcuts
+#define SHELL_SCREEN     5 // linux screen shortcuts
+#define SCREEN_NAV       6 // navigate between linux screen tabs 
+#define BROWSER_CONTROL  7 // control browser and mouse
+#define COMBINED         8 // combined numbers and symbols layer
+#define ANDROID_STUDIO   9
 
 
 // macros
@@ -94,7 +96,17 @@ enum custom_keycodes {
 #define SCREEN_PASTEREG_3 30
 #define DEL_TO_HOME 36
 
-
+// Android Studio shortcuts
+#define AS_TABLEFT LALT(KC_LEFT)
+#define AS_TABRIGHT LALT(KC_RIGHT)
+#define AS_SYMBOL LCTL(LALT(KC_N))
+#define AS_CLASS LCTL(KC_N)
+#define AS_FINDUSAGE LALT(KC_F7)
+#define AS_BACK LCTL(LALT(KC_LEFT))
+#define AS_GO_DECLARATION LCTL(KC_B)
+#define AS_GO_IMPLEMENTATION LCTL(LALT(KC_B))
+#define AS_CLOSETAB LCTL(KC_F4)
+#define AS_CLOSETOOLWINDOW LCTL(LSFT(KC_F4))
 
 
 #define MACRO_SCREEN_NUM(MACRO_NAME,NUM) \
@@ -164,6 +176,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       MEH(KC_F5),MEH(KC_F6),MEH(KC_F7),MEH(KC_F8),KC_ENTER,KC_SPACE
 
   ),
+  
+    // alternate base layout
+  [BASE_ALTERNATE] = LAYOUT_ergodox(
+       // left hand
+       KC_TRNS,            KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,   KC_TRNS,
+       KC_TRNS,            KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,   KC_TRNS,
+       KC_TRNS,            KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,
+       OSL(ANDROID_STUDIO),KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,   KC_TRNS,
+               // bottom row
+               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       // thumb cluster
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,          KC_TRNS,                   KC_TRNS,             KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,          KC_TRNS,                   KC_TRNS,             KC_TRNS,
+                KC_TRNS, KC_TRNS,       KC_TRNS,          KC_TRNS,                   KC_TRNS,             KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,          KC_TRNS,                   KC_TRNS,             KC_TRNS,
+                         // bottom row
+                         KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,             KC_TRNS,
+       // thumb cluster
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+  ),  
 
   [KEYNAV] = LAYOUT_ergodox(
     // left hand
@@ -195,7 +233,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
            KC_TRNS,MEH(KC_L), MEH(KC_M),MEH(KC_N), MEH(KC_O), MEH(KC_P),
            KC_TRNS,MEH(KC_Q), MEH(KC_R),MEH(KC_S), MEH(KC_T), MEH(KC_U), KC_TRNS,
                    // bottom row
-                   RESET,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                   RESET,DF(BASE),DF(BASE_ALTERNATE),KC_TRNS,KC_TRNS,
                                            // thumb cluster
                                            KC_TRNS,KC_TRNS,
                                                    KC_TRNS,
@@ -294,7 +332,31 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 
-
+    // android studio shortcuts
+  [ANDROID_STUDIO] = LAYOUT_ergodox(
+       // left hand
+       KC_NO,  KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,   KC_TRNS,
+       KC_TRNS,KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,   KC_TRNS,
+       KC_TRNS,KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,
+       KC_TRNS,KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,   KC_TRNS,
+               // bottom row
+               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       // thumb cluster
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,          KC_TRNS,                   KC_TRNS,              KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS,       AS_FINDUSAGE,     AS_GO_DECLARATION,         AS_GO_IMPLEMENTATION, KC_TRNS,
+                KC_TRNS, AS_TABLEFT,    AS_TABRIGHT,      AS_SYMBOL,                 AS_CLASS,             AS_BACK,
+       KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,          AS_CLOSETAB,               AS_CLOSETOOLWINDOW,   KC_TRNS,
+                         // bottom row
+                         KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,             KC_TRNS,
+       // thumb cluster
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+  ),
 
   [COMBINED] = LAYOUT_ergodox(
 

keyboards/ergodox_infinity/keymaps/default/keymap.c

@@ -1,6 +1,4 @@
 #include QMK_KEYBOARD_H
-#include "debug.h"
-#include "action_layer.h"
 #include "version.h"
 
 #define BASE 0 // default layer

keyboards/ergotaco/config.h

@@ -0,0 +1,61 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Copy and worked on with love from the EZ team
+
+#pragma once
+#include "config_common.h"
+
+#define VERBOSE
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1337
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    g Heavy Industries 
+#define PRODUCT         ErgoTaco
+#define DESCRIPTION     QMK keyboard firmware for ErgoTaco
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
+#define MATRIX_COLS 1
+
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0
+#define TAPPING_TOGGLE  1
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define TAPPING_TERM    200
+#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() (get_mods() == MOD_MASK_CTRL || get_mods() == MOD_MASK_SHIFT)
+
+#define DEBOUNCE    5
+#define USB_MAX_POWER_CONSUMPTION 500

keyboards/ergotaco/ergotaco.c

@@ -0,0 +1,72 @@
+#include QMK_KEYBOARD_H
+
+bool i2c_initialized = 0;
+i2c_status_t mcp23018_status = 0x20;
+
+void matrix_init_kb(void) {
+    // (tied to Vcc for hardware convenience)
+    //DDRB  &= ~(1<<4);  // set B(4) as input
+    //PORTB &= ~(1<<4);  // set B(4) internal pull-up disabled
+
+    // unused pins
+    // set as input with internal pull-up enabled
+    DDRB  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTB |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
+
+    DDRC  &= ~(1<<7 | 1<<6);
+    PORTC |=  (1<<7 | 1<<6);
+
+    DDRD  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTD |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
+
+    DDRE  &= ~(1<<6);
+    PORTE |=  (1<<6);
+
+    DDRF  &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6 | 1<<7);
+    PORTF |=  (1<<0 | 1<<1 | 1<<4 | 1<<6 | 1<<7);
+
+    matrix_init_user();
+}
+
+
+uint8_t init_mcp23018(void) {
+    print("starting init");
+    mcp23018_status = 0x20;
+
+    // I2C subsystem
+
+    // uint8_t sreg_prev;
+    // sreg_prev=SREG;
+    // cli();
+
+    if (i2c_initialized == 0) {
+        i2c_init();  // on pins D(1,0)
+        i2c_initialized = true;
+        _delay_ms(1000);
+    }
+
+    // set pin direction
+    // - unused  : input  : 1
+    // - input   : input  : 1
+    // - driving : output : 0
+    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT);            if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    i2c_stop();
+
+    // set pull-up
+    // - unused  : on  : 1
+    // - input   : on  : 1
+    // - driving : off : 0
+    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(GPPUA, ERGODOX_EZ_I2C_TIMEOUT);             if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+
+out:
+    i2c_stop();
+    // SREG=sreg_prev;
+    //uprintf("Init %x\n", mcp23018_status);
+    return mcp23018_status;
+}

keyboards/ergotaco/ergotaco.h

@@ -0,0 +1,50 @@
+#pragma once
+#include <util/delay.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include "quantum.h"
+#include "i2c_master.h"
+#include "matrix.h"
+
+
+extern i2c_status_t mcp23018_status;
+#define ERGODOX_EZ_I2C_TIMEOUT 1000
+#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
+#define CPU_16MHz       0x00
+
+// I2C aliases and register addresses (see "mcp23018.md")
+//#define I2C_ADDR        0b0100000
+#define I2C_ADDR        0x20
+#define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
+#define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )
+#define IODIRA          0x00            // i/o direction register
+#define IODIRB          0x01
+#define GPPUA           0x0C            // GPIO pull-up resistor register
+#define GPPUB           0x0D
+#define GPIOA           0x12            // general purpose i/o port register (write modifies OLAT)
+#define GPIOB           0x13
+#define OLATA           0x14            // output latch register
+#define OLATB           0x15
+
+void init_ergodox(void);
+uint8_t init_mcp23018(void);
+
+/*  ---------- LEFT HAND -----------   ---------- RIGHT HAND ---------- */
+#define LAYOUT(                                                          \
+    L00,L01,L02,L03,L04,L05,                   R00,R01,R02,R03,R04,R05)  \
+                                                                         \
+   /* matrix positions */                                                \
+    {			\
+    {R00},     \
+    {R01},     \
+    {R02},     \
+    {R03},     \
+    {R04},     \
+    {R05},     \
+    {L05},     \
+    {L04},     \
+    {L03},     \
+    {L02},     \
+    {L01},     \
+    {L00},     \
+}

keyboards/ergotaco/info.json

@@ -0,0 +1,61 @@
+{
+    "keyboard_name": "ErgoTaco",
+    "url": "http://gboards.ca",
+    "maintainer": "germ",
+    "width": 13,
+    "height": 2.75,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {
+                    "x": 0,
+                    "y": 1.25
+                },
+                {
+                    "x": 1,
+                    "y": 0.75
+                },
+                {
+                    "x": 2,
+                    "y": 0.5
+                },
+                {
+                    "x": 3,
+                    "y": 0.25
+                },
+                {
+                    "x": 4,
+                    "y": 1
+                },
+                {
+                    "x": 5,
+                    "y": 1.75
+                },
+                {
+                    "x": 7,
+                    "y": 1.75
+                },
+                {
+                    "x": 8,
+                    "y": 1
+                },
+                {
+                    "x": 9,
+                    "y": 0.25
+                },
+                {
+                    "x": 10,
+                    "y": 0.5
+                },
+                {
+                    "x": 11,
+                    "y": 0.75
+                },
+                {
+                    "x": 12,
+                    "y": 1.25
+                }
+            ]
+        }
+    }
+}

keyboards/ergotaco/keymaps/default/keymap.c

@@ -0,0 +1,42 @@
+/* Good on you for modifying your layout! if you don't have 
+ * time to read the QMK docs, a list of keycodes can be found at
+ *
+ * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
+ *
+ * There's also a template for adding new layers at the bottom of this file!
+ */
+
+#include QMK_KEYBOARD_H
+
+#define FIESTA   0 // default layer
+#define TACOTIME 1 // symbols
+
+// Blank template at the bottom
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap template 
+ *
+ * ,-------------------------------------------------.           ,--------------------------------------------.
+ * |       |      |      |      |      |      |      |           |       |      |      |      |      |        |
+ * `-------+------+------+------+------+-------------'           `-------+------+------+------+------+--------' */
+[FIESTA] = LAYOUT(  
+   KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y,        KC_A, KC_S, KC_D, KC_F, KC_G, KC_H
+),
+};
+
+/* Keymap template 
+ *
+ * ,-------------------------------------------------.           ,--------------------------------------------.
+ * |       |      |      |      |      |      |      |           |       |      |      |      |      |        |
+ * `-------+------+------+------+------+-------------'           `-------+------+------+------+------+--------'
+[FIESTA] = LAYOUT(  
+   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+),
+ */
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+};