Fix bit count calculation for iterating layers

* Adding an AUDIO_CLICKY_DELAY_DURATION configurable value to the AUDIO_CLICKY feature.

* Tweaking my community keymap to work better with my rev 4 planck.

.travis.yml

@@ -13,10 +13,14 @@ env:
   - MAKEFLAGS="-j3 --output-sync"
 before_install:
   - wget http://ww1.microchip.com/downloads/en/DeviceDoc/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz || wget http://qmk.fm/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
+  # Need DFU > .5 for dfu-suffix
+  - sudo add-apt-repository --yes ppa:tormodvolden/ppa
+  - sudo apt-get update -qq
 install:
   - tar -zxf avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
   - export PATH="$PATH:$TRAVIS_BUILD_DIR/avr8-gnu-toolchain-linux_x86_64/bin"
   - npm install -g moxygen
+  - sudo apt-get -y --force-yes install dfu-util
 before_script:
   - avr-gcc --version
 script:

Makefile

@@ -534,6 +534,8 @@ endef
 %:
 	# Check if we have the CMP tool installed
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
+	# Ensure that python3 is installed. This check can be removed after python is used in more places.
+	if ! python3 --version 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
 	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 1 --init lib/chibios; fi

Vagrantfile

@@ -7,6 +7,8 @@ Vagrant.configure(2) do |config|
 
   # VMware/Virtualbox ( and also Hyperv/Parallels) 64 bit
   config.vm.box = "generic/debian9"
+  
+  config.vm.synced_folder '.', '/vagrant'
 
   # This section allows you to customize the Virtualbox VM
   # settings, ie showing the GUI or upping the memory
@@ -64,7 +66,7 @@ Vagrant.configure(2) do |config|
   # If this causes issues you can run a 'vagrant destroy' and then
   # add a # before ,run: (or change "always" to "once") and run 'vagrant up' to get a working
   # non-updated box and then attempt to troubleshoot or open a Github issue
-  config.vm.provision "shell", inline: "/bin/sh -c 'yes | /vagrant/util/qmk_install.sh'", run: "always"
+  config.vm.provision "shell", inline: "/vagrant/util/qmk_install.sh", run: "always"
 
   config.vm.post_up_message = <<-EOT
 

build_keyboard.mk

@@ -324,7 +324,6 @@ ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
 endif
 
 # # project specific files
-SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
 SRC += $(KEYBOARD_SRC) \
     $(KEYMAP_C) \
     $(QUANTUM_SRC)
@@ -334,15 +333,16 @@ SRC += $(KEYBOARD_SRC) \
 
 # Search Path
 VPATH += $(KEYMAP_PATH)
+VPATH += $(USER_PATH)
 VPATH += $(KEYBOARD_PATHS)
 VPATH += $(COMMON_VPATH)
-VPATH += $(USER_PATH)
 
 include common_features.mk
 include $(TMK_PATH)/protocol.mk
 include $(TMK_PATH)/common.mk
 include bootloader.mk
 
+SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
 SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
 SRC += $(TMK_COMMON_SRC)
 OPT_DEFS += $(TMK_COMMON_DEFS)

docs/config_options.md

@@ -171,6 +171,8 @@ If you define these options you will enable the associated feature, which may in
   * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
 * `#define TAP_CODE_DELAY 100`
   * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
+* `#define TAP_HOLD_CAPS_DELAY 200`
+  * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPSLOCK` keycode, as this has some special handling on MacOS.  The value is in milliseconds, and defaults to 200ms if not defined. 
 
 ## RGB Light Configuration
 
@@ -330,6 +332,8 @@ Use these to enable or disable building certain features. The more you have enab
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
+* `LINK_TIME_OPTIMIZATION_ENABLE`
+  = Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` 
 
 ## USB Endpoint Limitations
 

docs/feature_audio.md

@@ -175,8 +175,9 @@ You can configure the default, min and max frequencies, the stepping and built i
 | `AUDIO_CLICKY_FREQ_DEFAULT` | 440.0f | Sets the default/starting audio frequency for the clicky sounds. |
 | `AUDIO_CLICKY_FREQ_MIN` | 65.0f | Sets the lowest frequency (under 60f are a bit buggy). |
 | `AUDIO_CLICKY_FREQ_MAX` | 1500.0f | Sets the the highest frequency. Too high may result in coworkers attacking you. |
-| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes. |
+| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes.  This is a multiplicative factor.  The default steps the frequency up/down by a musical minor third.  |
 | `AUDIO_CLICKY_FREQ_RANDOMNESS`     |  0.05f |  Sets a factor of randomness for the clicks, Setting this to `0f` will make each click identical, and `1.0f` will make this sound much like the 90's computer screen scrolling/typing effect. | 
+| `AUDIO_CLICKY_DELAY_DURATION` | 1 | An integer note duration where 1 is 1/16th of the tempo, or a sixty-fourth note (see `quantum/audio/musical_notes.h` for implementation details). The main clicky effect will be delayed by this duration.  Adjusting this to values around 6-12 will help compensate for loud switches. |
 
 
 

docs/feature_macros.md

@@ -230,7 +230,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 void matrix_scan_user(void) {     # The very important timer. 
   if (is_alt_tab_active) {
     if (timer_elapsed(alt_tab_timer) > 1000) {
-      unregister_code16(LALT(KC_TAB));
+      unregister_code(KC_LALT);
       is_alt_tab_active = false;
     }
   }

docs/feature_rgb_matrix.md

@@ -30,9 +30,11 @@ Configure the hardware via your `config.h`:
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 25
 #define DRIVER_2_LED_TOTAL 24
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 ```
 
+!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+
 Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
@@ -124,21 +126,25 @@ Configure the hardware via your `config.h`:
 
 ---
 
-From this point forward the configuration is the same for all the drivers. The struct rgb_led array tells the system for each led, what key electrical matrix it represents, what the physical position is on the board, and if the led is for a modifier key or not. Here is a brief example:
+From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
 
 ```C
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-/*  {row | col << 4}
-    *    |         {x=0..224, y=0..64}
-    *    |            |              flags
-    *    |            |                | */
-    {{0|(0<<4)},   {20.36*0, 21.33*0}, 1},
-    {{0|(1<<4)},   {20.36*1, 21.33*0}, 4},
-    ....
-}
+const led_config_t g_led_config = { {
+  // Key Matrix to LED Index
+  {   5, NO_LED, NO_LED,   0 },
+  { NO_LED, NO_LED, NO_LED, NO_LED },
+  {   4, NO_LED, NO_LED,   1 },
+  {   3, NO_LED, NO_LED,   2 }
+}, {
+  // LED Index to Physical Position
+  { 188,  16 }, { 187,  48 }, { 149,  64 }, { 112,  64 }, {  37,  48 }, {  38,  16 }
+}, {
+  // LED Index to Flag
+  1, 4, 4, 4, 4, 1
+} };
 ```
 
-The first part, `{row | col << 4}`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `{x=0..224, y=0..64}` represents the LED's physical position on the keyboard. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64 as the effects are based on this range. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents x, y coordinate 0, 0 and the bottom right of your keyboard represents 224, 64. Using this as a basis, you can use the following formula to calculate the physical position:
+The first part, `// Key Matrix to LED Index`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `// LED Index to Physical Position` represents the LED's physical position on the keyboard. The first value, `x`, is between 0-224 (inclusive), and the second value, `y`, is between 0-64 (inclusive). This range is due to effect that calculate the center or halves for their animations. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents x, y coordinate 0, 0 and the bottom right of your keyboard represents 224, 64. Using this as a basis, you can use the following formula to calculate the physical position:
 
 ```C
 x = 224 / (NUMBER_OF_COLS - 1) * COL_POSITION
@@ -147,7 +153,7 @@ y =  64 / (NUMBER_OF_ROWS - 1) * ROW_POSITION
 
 Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout.
 
-`flags` is a bitmask, whether or not a certain LEDs is of a certain type. It is recommended that LEDs are set to only 1 type.
+`// LED Index to Flag` is a bitmask, whether or not a certain LEDs is of a certain type. It is recommended that LEDs are set to only 1 type.
 
 ## Flags
 
@@ -155,8 +161,8 @@ Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based
 |------------------------------------|-------------------------------------------|
 |`#define HAS_FLAGS(bits, flags)`    |Returns true if `bits` has all `flags` set.|
 |`#define HAS_ANY_FLAGS(bits, flags)`|Returns true if `bits` has any `flags` set.|
-|`#define LED_FLAG_NONE      0x00`   |If thes LED has no flags.                  |
-|`#define LED_FLAG_ALL       0xFF`   |If thes LED has all flags.                 |
+|`#define LED_FLAG_NONE      0x00`   |If this LED has no flags.                  |
+|`#define LED_FLAG_ALL       0xFF`   |If this LED has all flags.                 |
 |`#define LED_FLAG_MODIFIER  0x01`   |If the Key for this LED is a modifier.     |
 |`#define LED_FLAG_UNDERGLOW 0x02`   |If the LED is for underglow.               |
 |`#define LED_FLAG_KEYLIGHT  0x04`   |If the LED is for key backlight.           |
@@ -191,13 +197,18 @@ enum rgb_matrix_effects {
     RGB_MATRIX_CYCLE_ALL,           // Full keyboard solid hue cycling through full gradient
     RGB_MATRIX_CYCLE_LEFT_RIGHT,    // Full gradient scrolling left to right
     RGB_MATRIX_CYCLE_UP_DOWN,       // Full gradient scrolling top to bottom
+    RGB_MATRIX_CYCLE_OUT_IN,        // Full gradient scrolling out to in
+    RGB_MATRIX_CYCLE_OUT_IN_DUAL,   // Full dual gradients scrolling out to in
     RGB_MATRIX_RAINBOW_MOVING_CHEVRON,  // Full gradent Chevron shapped scrolling left to right
     RGB_MATRIX_DUAL_BEACON,         // Full gradient spinning around center of keyboard
     RGB_MATRIX_RAINBOW_BEACON,      // Full tighter gradient spinning around center of keyboard
     RGB_MATRIX_RAINBOW_PINWHEELS,   // Full dual gradients spinning two halfs of keyboard
     RGB_MATRIX_RAINDROPS,           // Randomly changes a single key's hue
     RGB_MATRIX_JELLYBEAN_RAINDROPS, // Randomly changes a single key's hue and saturation
+#if define(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
+    RGB_MATRIX_TYPING_HEATMAP,      // How hot is your WPM!
     RGB_MATRIX_DIGITAL_RAIN,        // That famous computer simulation
+#endif
 #if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES)
     RGB_MATRIX_SOLID_REACTIVE_SIMPLE,   // Pulses keys hit to hue & value then fades value out
     RGB_MATRIX_SOLID_REACTIVE,      // Static single hue, pulses keys hit to shifted hue then fades to current hue
@@ -227,12 +238,15 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 |`#define DISABLE_RGB_MATRIX_CYCLE_ALL`                 |Disables `RGB_MATRIX_CYCLE_ALL`                |
 |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`          |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`         |
 |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`             |Disables `RGB_MATRIX_CYCLE_UP_DOWN`            |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN`              |Disables `RGB_MATRIX_CYCLE_OUT_IN`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL`         |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL`        |
 |`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`    |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`   |
 |`#define DISABLE_RGB_MATRIX_DUAL_BEACON`               |Disables `RGB_MATRIX_DUAL_BEACON`              |
 |`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`            |Disables `RGB_MATRIX_RAINBOW_BEACON`           |
 |`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`         |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`        |
 |`#define DISABLE_RGB_MATRIX_RAINDROPS`                 |Disables `RGB_MATRIX_RAINDROPS`                |
 |`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`       |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`      |
+|`#define DISABLE_RGB_MATRIX_TYPING_HEATMAP`            |Disables `RGB_MATRIX_TYPING_HEATMAP`           |
 |`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`              |Disables `RGB_MATRIX_DIGITAL_RAIN`             |
 |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`            |Disables `RGB_MATRIX_SOLID_REACTIVE`           |
 |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE`     |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE`    |

docs/feature_rgblight.md

@@ -37,9 +37,9 @@ QMK uses [Hue, Saturation, and Value](https://en.wikipedia.org/wiki/HSL_and_HSV)
 
 <img src="gitbook/images/color-wheel.svg" alt="HSV Color Wheel" width="250"/>
 
-Changing the **Hue** cycles around the circle.  
-Changing the **Saturation** moves between the inner and outer sections of the wheel, affecting the intensity of the color.  
-Changing the **Value** sets the overall brightness.
+Changing the **Hue** cycles around the circle.<br>
+Changing the **Saturation** moves between the inner and outer sections of the wheel, affecting the intensity of the color.<br>
+Changing the **Value** sets the overall brightness.<br>
 
 ## Keycodes
 
@@ -77,8 +77,7 @@ Your RGB lighting can be configured by placing these `#define`s in your `config.
 |`RGBLIGHT_SLEEP`     |*Not defined*|If defined, the RGB lighting will be switched off when the host goes to sleep|
 |`RGBLIGHT_SPLIT`     |*Not defined*|If defined, synchronization functionality for split keyboards is added|
 
-## Animations
-
+## Effects and Animations
 
 Not only can this lighting be whatever color you want,
 if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a number of animation modes at your disposal:
@@ -100,29 +99,54 @@ Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstrat
 
 Note: For versions older than 0.6.117, The mode numbers were written directly. In `quantum/rgblight.h` there is a contrast table between the old mode number and the current symbol.
 
-The following options can be used to tweak the various animations:
+### Effect and Animation Toggles
+
+Use these defines to add or remove animations from the firmware. When you are running low on flash space, it can be helpful to disable animations you are not using.
 
 |Define                              |Default      |Description                                                                          |
 |------------------------------------|-------------|-------------------------------------------------------------------------------------|
-|`RGBLIGHT_EFFECT_BREATHING`         |*Not defined*|If defined, enable breathing animation mode.                                         |
-|`RGBLIGHT_EFFECT_RAINBOW_MOOD`      |*Not defined*|If defined, enable rainbow mood animation mode.                                      |
-|`RGBLIGHT_EFFECT_RAINBOW_SWIRL`     |*Not defined*|If defined, enable rainbow swirl animation mode.                                     |
-|`RGBLIGHT_EFFECT_SNAKE`             |*Not defined*|If defined, enable snake animation mode.                                             |
-|`RGBLIGHT_EFFECT_KNIGHT`            |*Not defined*|If defined, enable knight animation mode.                                            |
-|`RGBLIGHT_EFFECT_CHRISTMAS`         |*Not defined*|If defined, enable christmas animation mode.                                         |
-|`RGBLIGHT_EFFECT_STATIC_GRADIENT`   |*Not defined*|If defined, enable static gradient mode.                                             |
-|`RGBLIGHT_EFFECT_RGB_TEST`          |*Not defined*|If defined, enable RGB test animation mode.                                          |
-|`RGBLIGHT_EFFECT_ALTERNATING`       |*Not defined*|If defined, enable alternating animation mode.                                       |
-|`RGBLIGHT_ANIMATIONS`               |*Not defined*|If defined, enables all additional animation modes                                   |
-|`RGBLIGHT_EFFECT_BREATHE_CENTER`    |`1.85`       |Used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 |
+|`RGBLIGHT_ANIMATIONS`               |*Not defined*|Enable all additional animation modes.                                   |
+|`RGBLIGHT_EFFECT_ALTERNATING`       |*Not defined*|Enable alternating animation mode.                                       |
+|`RGBLIGHT_EFFECT_BREATHING`         |*Not defined*|Enable breathing animation mode.                                         |
+|`RGBLIGHT_EFFECT_CHRISTMAS`         |*Not defined*|Enable christmas animation mode.                                         |
+|`RGBLIGHT_EFFECT_KNIGHT`            |*Not defined*|Enable knight animation mode.                                            |
+|`RGBLIGHT_EFFECT_RAINBOW_MOOD`      |*Not defined*|Enable rainbow mood animation mode.                                      |
+|`RGBLIGHT_EFFECT_RAINBOW_SWIRL`     |*Not defined*|Enable rainbow swirl animation mode.                                     |
+|`RGBLIGHT_EFFECT_RGB_TEST`          |*Not defined*|Enable RGB test animation mode.                                          |
+|`RGBLIGHT_EFFECT_SNAKE`             |*Not defined*|Enable snake animation mode.                                             |
+|`RGBLIGHT_EFFECT_STATIC_GRADIENT`   |*Not defined*|Enable static gradient mode.                                             |
+
+### Effect and Animation Settings
+
+The following options are used to tweak the various animations:
+
+|Define                              |Default      |Description                                                                          |
+|------------------------------------|-------------|-------------------------------------------------------------------------------------|
+|`RGBLIGHT_EFFECT_BREATHE_CENTER`    |*Not defined*|If defined, used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 |
 |`RGBLIGHT_EFFECT_BREATHE_MAX`       |`255`        |The maximum brightness for the breathing mode. Valid values are 1 to 255             |
-|`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
-|`RGBLIGHT_EFFECT_KNIGHT_LENGTH`     |`3`          |The number of LEDs to light up for the "Knight" animation                            |
-|`RGBLIGHT_EFFECT_KNIGHT_OFFSET`     |`0`          |The number of LEDs to start the "Knight" animation from the start of the strip by    |
-|`RGBLIGHT_EFFECT_KNIGHT_LED_NUM`    |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel                             |
 |`RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL`|`1000`       |How long to wait between light changes for the "Christmas" animation, in milliseconds|
 |`RGBLIGHT_EFFECT_CHRISTMAS_STEP`    |`2`          |The number of LEDs to group the red/green colors by for the "Christmas" animation    |
-|`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`360`        |Range adjustment for the rainbow swirl effect to get different swirls                |
+|`RGBLIGHT_EFFECT_KNIGHT_LED_NUM`    |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel                             |
+|`RGBLIGHT_EFFECT_KNIGHT_LENGTH`     |`3`          |The number of LEDs to light up for the "Knight" animation                            |
+|`RGBLIGHT_EFFECT_KNIGHT_OFFSET`     |`0`          |The number of LEDs to start the "Knight" animation from the start of the strip by    |
+|`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`255`        |Range adjustment for the rainbow swirl effect to get different swirls                |
+|`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
+
+### Example Usage to Reduce Memory Footprint
+  1. Remove `RGBLIGHT_ANIMATIONS` from `config.h`.
+  1. Selectively add the animations you want to enable. The following would enable two animations and save about 4KiB:
+
+```diff
+ #undef RGBLED_NUM
+-#define RGBLIGHT_ANIMATIONS
++#define RGBLIGHT_EFFECT_STATIC_GRADIENT
++#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+ #define RGBLED_NUM 12
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+```
+
+### Animation Speed
 
 You can also modify the speeds that the different modes animate at:
 
@@ -152,44 +176,100 @@ const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 
 If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:
 
-|Function                                    |Description                                                                                                                                                   |
-|--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------|
-|`rgblight_enable()`                         |Turn LEDs on, based on their previous state                                                                                                                   |
-|`rgblight_enable_noeeprom()`                |Turn LEDs on, based on their previous state (not written to EEPROM)                                                                                           |
-|`rgblight_disable()`                        |Turn LEDs off                                                                                                                                                 |
-|`rgblight_disable_noeeprom()`               |Turn LEDs off (not written to EEPROM)                                                                                                                         |
-|`rgblight_mode(x)`                          |Set the mode, if RGB animations are enabled                                                                                                                   |
-|`rgblight_mode_noeeprom(x)`                 |Set the mode, if RGB animations are enabled (not written to EEPROM)                                                                                           |
-|`rgblight_setrgb(r, g, b)`                  |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                                           |
-|`rgblight_setrgb_at(r, g, b, led)`          |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)              |
+### Utility Functions
+|Function                                    |Description                                                        |
+|--------------------------------------------|-------------------------------------------------------------------|
+|`sethsv(hue, sat, val, ledbuf)`             |Set ledbuf to the given HSV value                                  |
+|`sethsv_raw(hue, sat, val, ledbuf)`         |Set ledbuf to the given HSV value without RGBLIGHT_LIMIT_VAL check |
+|`setrgb(r, g, b, ledbuf)`                   |Set ledbuf to the given RGB value where `r`/`g`/`b`                |
+
+### Low level Functions
+|Function                                    |Description                                |
+|--------------------------------------------|-------------------------------------------|
+|`rgblight_set()`                            |Flash out led buffers to LEDs              |
+|`rgblight_set_clipping_range(pos, num)`     |Set clipping Range. see [Clipping Range](#clipping-range) |
+
+Example:
+```c
+sethsv(HSV_WHITE, (LED_TYPE *)&led[0]); // led 0
+sethsv(HSV_RED,   (LED_TYPE *)&led[1]); // led 1
+sethsv(HSV_GREEN, (LED_TYPE *)&led[2]); // led 2
+rgblight_set(); // Utility functions do not call rgblight_set() automatically, so they need to be called explicitly.
+```
+
+### Effects and Animations Functions
+#### effect range setting
+|Function                                    |Description       |
+|--------------------------------------------|------------------|
+|`rgblight_set_effect_range(pos, num)`       |Set Effects Range |
+
+#### direct operation
+|Function                                    |Description  |
+|--------------------------------------------|-------------|
+|`rgblight_setrgb_at(r, g, b, index)`          |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `index` is between 0 and `RGBLED_NUM` (not written to EEPROM) |
+|`rgblight_sethsv_at(h, s, v, index)`          |Set a single LED to the given HSV value, where `h`/`s`/`v` are between 0 and 255, and `index` is between 0 and `RGBLED_NUM` (not written to EEPROM) |
 |`rgblight_setrgb_range(r, g, b, start, end)`|Set a continuous range of LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
-|`rgblight_setrgb_master(r, g, b)`           |Set the LEDs on the master side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                      |
-|`rgblight_setrgb_slave(r, g, b)`            |Set the LEDs on the slave side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                       |
-|`rgblight_sethsv(h, s, v)`                  |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255                                                          |
-|`rgblight_sethsv_noeeprom(h, s, v)`         |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM)                                  |
-|`rgblight_sethsv_at(h, s, v, led)`          |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
-|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
-|`rgblight_sethsv_master(h, s, v)`           |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                 |
-|`rgblight_sethsv_slave(h, s, v)`            |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                  |
-|`rgblight_toggle()`                         |Toggle all LEDs between on and off                                                                                                                            |
-|`rgblight_toggle_noeeprom()`                |Toggle all LEDs between on and off (not written to EEPROM)                                                                                                    |
-|`rgblight_step()`                           |Change the mode to the next RGB animation in the list of enabled RGB animations                                                                               |
-|`rgblight_step_noeeprom()`                  |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                       |
-|`rgblight_step_reverse()`                   |Change the mode to the previous RGB animation in the list of enabled RGB animations                                                                           |
-|`rgblight_step_reverse_noeeprom()`          |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                   |
-|`rgblight_increase_hue()`                   |Increase the hue for all LEDs. This wraps around at maximum hue                                                                                               |
-|`rgblight_increase_hue_noeeprom()`          |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM)                                                                       |
-|`rgblight_decrease_hue()`                   |Decrease the hue for all LEDs. This wraps around at minimum hue                                                                                               |
-|`rgblight_decrease_hue_noeeprom()`          |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM)                                                                       |
-|`rgblight_increase_sat()`                   |Increase the saturation for all LEDs. This wraps around at maximum saturation                                                                                 |
-|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM)                                                         |
-|`rgblight_decrease_sat()`                   |Decrease the saturation for all LEDs. This wraps around at minimum saturation                                                                                 |
-|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM)                                                         |
-|`rgblight_increase_val()`                   |Increase the value for all LEDs. This wraps around at maximum value                                                                                           |
-|`rgblight_increase_val_noeeprom()`          |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM)                                                                   |
-|`rgblight_decrease_val()`                   |Decrease the value for all LEDs. This wraps around at minimum value                                                                                           |
-|`rgblight_decrease_val_noeeprom()`          |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM)                                                                   |
-|`rgblight_set_clipping_range(pos, num)`     |Set clipping Range                                                                                                                                            |
+|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h`/`s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_setrgb(r, g, b)`                  |Set effect range LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
+|`rgblight_setrgb_master(r, g, b)`           |Set the LEDs on the master side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
+|`rgblight_setrgb_slave(r, g, b)`            |Set the LEDs on the slave side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
+|`rgblight_sethsv_master(h, s, v)`           |Set the LEDs on the master side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
+|`rgblight_sethsv_slave(h, s, v)`            |Set the LEDs on the slave side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
+
+Example:
+```c
+rgblight_sethsv(HSV_WHITE, 0); // led 0
+rgblight_sethsv(HSV_RED,   1); // led 1
+rgblight_sethsv(HSV_GREEN, 2); // led 2
+// The above functions automatically calls rgblight_set(), so there is no need to call it explicitly.
+// Note that it is inefficient to call repeatedly.
+```
+
+#### effect mode change
+|Function                                    |Description  |
+|--------------------------------------------|-------------|
+|`rgblight_mode(x)`                          |Set the mode, if RGB animations are enabled |
+|`rgblight_mode_noeeprom(x)`                 |Set the mode, if RGB animations are enabled (not written to EEPROM) |
+|`rgblight_step()`                           |Change the mode to the next RGB animation in the list of enabled RGB animations |
+|`rgblight_step_noeeprom()`                  |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) |
+|`rgblight_step_reverse()`                   |Change the mode to the previous RGB animation in the list of enabled RGB animations |
+|`rgblight_step_reverse_noeeprom()`          |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) |
+
+#### effects mode disable/enable
+|Function                                    |Description  |
+|--------------------------------------------|-------------|
+|`rgblight_toggle()`                         |Toggle effect range LEDs between on and off |
+|`rgblight_toggle_noeeprom()`                |Toggle effect range LEDs between on and off (not written to EEPROM) |
+|`rgblight_enable()`                         |Turn effect range LEDs on, based on their previous state |
+|`rgblight_enable_noeeprom()`                |Turn effect range LEDs on, based on their previous state (not written to EEPROM) |
+|`rgblight_disable()`                        |Turn effect range LEDs off |
+|`rgblight_disable_noeeprom()`               |Turn effect range LEDs off (not written to EEPROM) |
+
+#### hue, sat, val change
+|Function                                    |Description  |
+|--------------------------------------------|-------------|
+|`rgblight_increase_hue()`                   |Increase the hue for effect range LEDs. This wraps around at maximum hue |
+|`rgblight_increase_hue_noeeprom()`          |Increase the hue for effect range LEDs. This wraps around at maximum hue (not written to EEPROM) |
+|`rgblight_decrease_hue()`                   |Decrease the hue for effect range LEDs. This wraps around at minimum hue |
+|`rgblight_decrease_hue_noeeprom()`          |Decrease the hue for effect range LEDs. This wraps around at minimum hue (not written to EEPROM) |
+|`rgblight_increase_sat()`                   |Increase the saturation for effect range LEDs. This wraps around at maximum saturation |
+|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for effect range LEDs. This wraps around at maximum saturation (not written to EEPROM) |
+|`rgblight_decrease_sat()`                   |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation |
+|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation (not written to EEPROM) |
+|`rgblight_increase_val()`                   |Increase the value for effect range LEDs. This wraps around at maximum value |
+|`rgblight_increase_val_noeeprom()`          |Increase the value for effect range LEDs. This wraps around at maximum value (not written to EEPROM) |
+|`rgblight_decrease_val()`                   |Decrease the value for effect range LEDs. This wraps around at minimum value |
+|`rgblight_decrease_val_noeeprom()`          |Decrease the value for effect range LEDs. This wraps around at minimum value (not written to EEPROM) |
+|`rgblight_sethsv(h, s, v)`                  |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 |
+|`rgblight_sethsv_noeeprom(h, s, v)`         |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
+
+#### query
+|Function               |Description      |
+|-----------------------|-----------------|
+|`rgblight_get_mode()`  |Get current mode |
+|`rgblight_get_hue()`   |Get current hue  |
+|`rgblight_get_sat()`   |Get current sat  |
+|`rgblight_get_val()`   |Get current val  |
 
 ## Colors
 
@@ -300,4 +380,6 @@ In addition to setting the Clipping Range, you can use `RGBLIGHT_LED_MAP` togeth
 ```
 <img src="https://user-images.githubusercontent.com/2170248/55743747-119e4c00-5a6e-11e9-91e5-013203ffae8a.JPG" alt="clip mapped" width="70%"/>
 
+## Hardware Modification
+
 If your keyboard lacks onboard underglow LEDs, you may often be able to solder on an RGB LED strip yourself. You will need to find an unused pin to wire to the data pin of your LED strip. Some keyboards may break out unused pins from the MCU to make soldering easier. The other two pins, VCC and GND, must also be connected to the appropriate power pins.

docs/feature_space_cadet.md

@@ -20,7 +20,7 @@ Firstly, in your keymap, do one of the following:
 |`KC_RCPC`  |Right Control when held, `)` when tapped   |
 |`KC_LAPO`  |Left Alt when held, `(` when tapped        |
 |`KC_RAPC`  |Right Alt when held, `)` when tapped       |
-|`KC_SFTENT`|Right Shift when held, `Enter` when tapped |
+|`KC_SFTENT`|Right Shift when held, Enter when tapped   |
 
 ## Caveats
 
@@ -38,16 +38,16 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe
 |----------------|-------------------------------|---------------------------------------------------------------------------------|
 |`LSPO_KEYS`     |`KC_LSFT, LSPO_MOD, LSPO_KEY`  |Send `KC_LSFT` when held, the mod and  key defined by `LSPO_MOD` and `LSPO_KEY`. |
 |`RSPC_KEYS`     |`KC_RSFT, RSPC_MOD, RSPC_KEY`  |Send `KC_RSFT` when held, the mod and  key defined by `RSPC_MOD` and `RSPC_KEY`. |
-|`LCPO_KEYS`     |`KC_LCTL, KC_LCTL, KC_9`       |Send `KC_LCTL` when held, the mod `KC_LCTL` with the key `KC_9` when tapped.     |
-|`RCPO_KEYS`     |`KC_RCTL, KC_RCTL, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RCTL` with the key `KC_0` when tapped.     |
-|`LAPO_KEYS`     |`KC_LALT, KC_LALT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LALT` with the key `KC_9` when tapped.     |
-|`RAPO_KEYS`     |`KC_RALT, KC_RALT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RALT` with the key `KC_0` when tapped.     |
+|`LCPO_KEYS`     |`KC_LCTL, KC_LSFT, KC_9`       |Send `KC_LCTL` when held, the mod `KC_LSFT` with the key `KC_9` when tapped.     |
+|`RCPC_KEYS`     |`KC_RCTL, KC_RSFT, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RSFT` with the key `KC_0` when tapped.     |
+|`LAPO_KEYS`     |`KC_LALT, KC_LSFT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LSFT` with the key `KC_9` when tapped.     |
+|`RAPC_KEYS`     |`KC_RALT, KC_RSFT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RSFT` with the key `KC_0` when tapped.     |
 |`SFTENT_KEYS`   |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped.          |
 
 
 ## Obsolete Configuration
 
-These defines are used in the above defines internally to support backwards compatibility, so you may continue to use them, however the above defines open up a larger range of flexibility than before. As an example, say you want to not send any modifier when you tap just `KC_LSPO`, with the old defines you had an all or nothing choice of using the `DISABLE_SPACE_CADET_MODIFIER` define. Now you can define that key as: `#define KC_LSPO_KEYS KC_LSFT, KC_TRNS, KC_9`. This tells the system to set Left Shift if held or used with other keys, then on tap send no modifier (transparent) with the `KC_9`
+These defines are used in the above defines internally to support backwards compatibility, so you may continue to use them, however the above defines open up a larger range of flexibility than before. As an example, say you want to not send any modifier when you tap just `KC_LSPO`, with the old defines you had an all or nothing choice of using the `DISABLE_SPACE_CADET_MODIFIER` define. Now you can define that key as: `#define LSPO_KEYS KC_LSFT, KC_TRNS, KC_9`. This tells the system to set Left Shift if held or used with other keys, then on tap send no modifier (transparent) with the `KC_9`.
 
 |Define                        |Default      |Description                                                       |
 |------------------------------|-------------|------------------------------------------------------------------|

docs/feature_unicode.md

@@ -4,11 +4,11 @@ There are three Unicode keymap definition methods available in QMK:
 
 ## `UNICODE_ENABLE`
 
-Supports Unicode up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. The keycode function is `UC(c)` in the keymap file, where _c_ is the code point's number (preferably hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`.
+Supports Unicode up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. The keycode function is `UC(c)` in the keymap, where _c_ is the code point's number (preferably hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`.
 
 ## `UNICODEMAP_ENABLE`
 
-Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(i)`, where _i_ is an array index into the mapping table. The table may contain at most 1024 entries.
+Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(i)`, where _i_ is an array index into the mapping table. The table may contain at most 16384 entries.
 
 You may want to have an enum to make referencing easier. So, you could add something like this to your keymap file:
 
@@ -26,13 +26,21 @@ const uint32_t PROGMEM unicode_map[] = {
 };
 ```
 
-Then you can use `X(BANG)` etc. in your keymap.
+Then you can use `X(BANG)`, `X(SNEK)` etc. in your keymap.
+
+### Lower and Upper Case
+
+Characters often come in lower and upper case pairs, for example: å, Å. To make inputting these characters easier, you can use `XP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear.
+
+This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `XP`. This blends Unicode keys in with regular alphas.
+
+Due to keycode size constraints, _i_ and _j_ can each only refer to one of the first 128 characters in your `unicode_map`. In other words, 0 ≤ _i_ ≤ 127 and 0 ≤ _j_ ≤ 127. This is enough for most use cases, but if you'd like to customize the index calculation, you can override the [`unicodemap_index()`](https://github.com/qmk/qmk_firmware/blob/71f640d47ee12c862c798e1f56392853c7b1c1a8/quantum/process_keycode/process_unicodemap.c#L40) function. This also allows you to, say, check Ctrl instead of Shift/Caps.
 
 ## `UCIS_ENABLE`
 
-Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you will have to add a keycode or function that calls `qk_ucis_start()`. Once this function's been called, you can type the corresponding mnemonic for your character, then hit Space or Enter to complete it, or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode character inserted.
+Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you have to add a keycode or function that calls `qk_ucis_start()`. Once this function has been called, you can type the corresponding mnemonic for your character, then hit Space or Enter to complete it, or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode character inserted.
 
-For instance, you would define a table like this in your keymap file:
+For instance, you could define a table like this in your keymap file:
 
 ```c
 const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE(
@@ -42,7 +50,7 @@ const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE(
 );
 ```
 
-You call `qk_ucis_start()`, then type "rofl" and hit Enter. QMK should erase the "rofl" text and input the laughing emoji.
+To use it, call `qk_ucis_start()`, then type "rofl" and hit Enter. QMK should erase the "rofl" text and insert the laughing emoji.
 
 ### Customization
 
@@ -60,28 +68,29 @@ Unicode input in QMK works by inputting a sequence of characters to the OS, sort
 
 The following input modes are available:
 
-* **`UC_OSX`**: Mac OS X built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with `UNICODEMAP`).
+* **`UC_OSX`**: macOS built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with `UNICODEMAP`).
 
   To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar.
-  By default, this mode uses the left Option key (`KC_LALT`), but this can be changed by defining [`UNICODE_OSX_KEY`](#input-key-configuration) with another keycode.
+  By default, this mode uses the left Option key (`KC_LALT`) for Unicode input, but this can be changed by defining [`UNICODE_KEY_OSX`](#input-key-configuration) with another keycode.
 
-  **Note:** Using the _Unicode Hex Input_ input source may disable some Option based shortcuts, such as: Option + Left Arrow (`moveWordLeftAndModifySelection`) and Option + Right Arrow  (`moveWordRightAndModifySelection`).
+  !> Using the _Unicode Hex Input_ input source may disable some Option based shortcuts, such as Option + Left Arrow and Option + Right Arrow.
 
 * **`UC_LNX`**: Linux built-in IBus Unicode input. Supports code points up to `0x10FFFF` (all possible code points).
 
   Enabled by default and works almost anywhere on IBus-enabled distros. Without IBus, this mode works under GTK apps, but rarely anywhere else.
+  By default, this mode uses Ctrl+Shift+U (`LCTL(LSFT(KC_U))`) to start Unicode input, but this can be changed by defining [`UNICODE_KEY_LNX`](#input-key-configuration) with another keycode. This might be required for IBus versions ≥1.5.15, where Ctrl+Shift+U behavior is consolidated into Ctrl+Shift+E.
 
 * **`UC_WIN`**: _(not recommended)_ Windows built-in hex numpad Unicode input. Supports code points up to `0xFFFF`.
 
-  To enable, create a registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad` and set its value to `1`. This can be done from the Command Prompt by running `reg add "HKCU\Control Panel\Input Method" -v EnableHexNumpad -t REG_SZ -d 1` with administrator privileges. Afterwards, reboot.
+  To enable, create a registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad` and set its value to `1`. This can be done from the Command Prompt by running `reg add "HKCU\Control Panel\Input Method" -v EnableHexNumpad -t REG_SZ -d 1` with administrator privileges. Reboot afterwards.
   This mode is not recommended because of reliability and compatibility issues; use the `UC_WINC` mode instead.
 
 * **`UC_BSD`**: _(non implemented)_ Unicode input under BSD. Not implemented at this time. If you're a BSD user and want to help add support for it, please [open an issue on GitHub](https://github.com/qmk/qmk_firmware/issues).
 
-* **`UC_WINC`**: Windows Unicode input using [WinCompose](https://github.com/samhocevar/wincompose). As of v0.8.2, supports code points up to `0xFFFFF` (all currently assigned code points).
+* **`UC_WINC`**: Windows Unicode input using [WinCompose](https://github.com/samhocevar/wincompose). As of v0.9.0, supports code points up to `0x10FFFF` (all possible code points).
 
   To enable, install the [latest release](https://github.com/samhocevar/wincompose/releases/latest). Once installed, WinCompose will automatically run on startup. Works reliably under all version of Windows supported by the app.
-  By default, this mode uses the right Alt key (`KC_RALT`), but this can be changed in the WinCompose settings and by defining [`UNICODE_WINC_KEY`](#input-key-configuration) with another keycode.
+  By default, this mode uses right Alt (`KC_RALT`) as the Compose key, but this can be changed in the WinCompose settings and by defining [`UNICODE_KEY_WINC`](#input-key-configuration) with another keycode.
 
 ### Switching Input Modes
 
@@ -89,17 +98,17 @@ There are two ways to set the input mode for Unicode: by keycode or by function.
 
 You can switch the input mode at any time by using one of the following keycodes. The easiest way is to add the ones you use to your keymap.
 
-|Keycode                |Alias    |Input mode   |Description                              |
-|-----------------------|---------|-------------|-----------------------------------------|
-|`UNICODE_MODE_FORWARD` |`UC_MOD` |             |Cycles forwards through the available modes. [(Disabled by default)](#input-method-cycling)|
-|`UNICODE_MODE_REVERSE` |`UC_RMOD`|             |Cycles forwards through the available modes. [(Disabled by default)](#input-method-cycling)|
-|`UNICODE_MODE_OSX`     |`UC_M_OS`|`UC_OSX`     |Switch to Mac OS X input.                |
-|`UNICODE_MODE_LNX`     |`UC_M_LN`|`UC_LNX`     |Switch to Linux input.                   |
-|`UNICODE_MODE_WIN`     |`UC_M_WI`|`UC_WIN`     |Switch to Windows input.                 |
-|`UNICODE_MODE_BSD`     |`UC_M_BS`|`UC_BSD`     |Switch to BSD input (not implemented).   |
-|`UNICODE_MODE_WINC`    |`UC_M_WC`|`UC_WINC`    |Switch to Windows input using WinCompose.|
+|Keycode               |Alias    |Input Mode  |Description                                                   |
+|----------------------|---------|------------|--------------------------------------------------------------|
+|`UNICODE_MODE_FORWARD`|`UC_MOD` |Next in list|[Cycle](#input-mode-cycling) through selected modes           |
+|`UNICODE_MODE_REVERSE`|`UC_RMOD`|Prev in list|[Cycle](#input-mode-cycling) through selected modes in reverse|
+|`UNICODE_MODE_OSX`    |`UC_M_OS`|`UC_OSX`    |Switch to macOS input                                         |
+|`UNICODE_MODE_LNX`    |`UC_M_LN`|`UC_LNX`    |Switch to Linux input                                         |
+|`UNICODE_MODE_WIN`    |`UC_M_WI`|`UC_WIN`    |Switch to Windows input                                       |
+|`UNICODE_MODE_BSD`    |`UC_M_BS`|`UC_BSD`    |Switch to BSD input (not implemented)                         |
+|`UNICODE_MODE_WINC`   |`UC_M_WC`|`UC_WINC`   |Switch to Windows input using WinCompose                      |
 
-You can also switch the input mode by calling `set_unicode_input_mode(x)` in your code, where _x_ is one of the above input mode constants (e.g. `UC_LNX`). Since the function only needs to be called once, it's recommended that you do it in `eeconfig_init_user` (or a similar function). For example:
+You can also switch the input mode by calling `set_unicode_input_mode(x)` in your code, where _x_ is one of the above input mode constants (e.g. `UC_LNX`). Since the function only needs to be called once, it's recommended that you do it in `eeconfig_init_user()` (or a similar function). For example:
 
 ```c
 void eeconfig_init_user(void) {
@@ -123,35 +132,45 @@ For instance, you can add these definitions to your `config.h` file:
 
 ### Additional Customization
 
-Because Unicode is such a large and variable feature, there are a number of options that you can customize to work better on your system.
+Because Unicode is a large and versatile feature, there are a number of options you can customize to make it work better on your system.
 
-#### Start and Finish input functions
+#### Start and Finish Input Functions
 
 The functions for starting and finishing Unicode input on your platform can be overridden locally. Possible uses include customizing input mode behavior if you don't use the default keys, or adding extra visual/audio feedback to Unicode input.
 
-* `void unicode_input_start(void)` – This sends the initial sequence that tells your platform to enter Unicode input mode. For example, it presses Ctrl+Shift+U on Linux and holds the Option key on Mac.
+* `void unicode_input_start(void)` – This sends the initial sequence that tells your platform to enter Unicode input mode. For example, it presses Ctrl+Shift+U on Linux and holds the Option key on macOS.
 * `void unicode_input_finish(void)` – This is called to exit Unicode input mode, for example by pressing Space or releasing the Option key.
 
 You can find the default implementations of these functions in [`process_unicode_common.c`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_unicode_common.c).
 
-
 #### Input Key Configuration
 
-Additionally, you can customize the keys used to trigger the unicode input for macOS and WinCompose by adding defines to your `config.h`
+You can customize the keys used to trigger Unicode input for macOS, Linux and WinCompose by adding corresponding defines to your `config.h`. The default values match the platforms' default settings, so you shouldn't need to change this unless Unicode input isn't working, or you want to use a different key (e.g. in order to free up left or right Alt).
+
+|Define            |Type      |Default           |Example                                    |
+|------------------|----------|------------------|-------------------------------------------|
+|`UNICODE_KEY_OSX` |`uint8_t` |`KC_LALT`         |`#define UNICODE_KEY_OSX  KC_RALT`         |
+|`UNICODE_KEY_LNX` |`uint16_t`|`LCTL(LSFT(KC_U))`|`#define UNICODE_KEY_LNX  LCTL(LSFT(KC_E))`|
+|`UNICODE_KEY_WINC`|`uint8_t` |`KC_RALT`         |`#define UNICODE_KEY_WINC KC_RGUI`         |
+
+#### Input Mode Cycling
+
+You can choose which input modes are available for cycling through. By default, this is disabled. If you want to enable it, limiting it to just the modes you use makes sense. Note that the values in the list are comma-delimited.
 
 ```c
-#define UNICODE_OSX_KEY  KC_LALT
-#define UNICODE_WINC_KEY KC_RALT
+#define UNICODE_SELECTED_MODES UC_OSX, UC_LNX, UC_WIN, UC_WINC
 ```
 
-#### Input Method Cycling
+You can cycle through the selected modes by using the `UC_MOD`/`UC_RMOD` keycodes, or by calling `cycle_unicode_input_mode(offset)` in your code (`offset` is how many modes to move forward by, so +1 corresponds to `UC_MOD`).
 
-Also, you can choose which input methods are availble for cycling through.  By default, this is disabled. But if you want to enabled it, then limiting it to just those modes makes sense.  Note that `UNICODE_SELECTED_MODES` define is comma delimited.
+By default, when the keyboard boots, it will initialize the input mode to the last one you used. You can disable this and make it start with the first mode in the list every time by adding the following to your `config.h`:
 
 ```c
-#define UNICODE_SELECTED_MODES UC_OSX, UC_LNX, UC_WIN, UC_BSD, UC_WINC
+#define UNICODE_CYCLE_PERSIST false
 ```
 
+!> Using `UNICODE_SELECTED_MODES` means you don't have to initially set the input mode in `matrix_init_user()` (or a similar function); the Unicode system will do that for you on startup. This has the added benefit of avoiding unnecessary writes to EEPROM.
+
 ## `send_unicode_hex_string`
 
 To type multiple characters for things like (ノಠ痊ಠ)ノ彡┻━┻, you can use `send_unicode_hex_string()` much like `SEND_STRING()` except you would use hex values separate by spaces.

docs/feature_userspace.md

@@ -110,7 +110,7 @@ QMK has a bunch of [functions](custom_quantum_functions.md) that have [`_quantum
 However, you can actually add support for keymap version, so that you can use it in both your userspace and your keymap! 
 
 
-For instance, lets looks at the `layer_state_set_user` function.  Lets enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionalitly to all of our boards, and then still have your `keymap.c` still able to use this functionality. 
+For instance, let's look at the `layer_state_set_user()` function.  You can enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionality on all of your boards, while also retaining the Tri Layer functionality in your `keymap.c` files. 
 
 In your `<name.c>` file, you'd want to add this: 
 ```c

docs/features.md

@@ -25,7 +25,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard.
 * [RGB Light](feature_rgblight.md) - RGB lighting for your keyboard.
 * [RGB Matrix](feature_rgb_matrix.md) - RGB Matrix lights for per key lighting.
-* [Space Cadet](feature_space_cadet_shift.md) - Use your left/right shift keys to type parenthesis and brackets.
+* [Space Cadet](feature_space_cadet.md) - Use your left/right shift keys to type parenthesis and brackets.
 * [Stenography](feature_stenography.md) - Put your keyboard into Plover mode for stenography use.
 * [Swap Hands](feature_swap_hands.md) - Mirror your keyboard for one handed usage.
 * [Tap Dance](feature_tap_dance.md) - Make a single key do as many things as you want.

docs/keycodes.md

@@ -216,6 +216,11 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
 |`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
 |`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
+|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
+|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
+|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
+|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
 |`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
@@ -450,7 +455,15 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Unicode Support](feature_unicode.md)
 
-|Key    |Description                                                                |
-|-------|---------------------------------------------------------------------------|
-|`UC(c)`|Send Unicode code point `c` (`UNICODE_ENABLE`)                             |
-|`X(i)` |Send Unicode code point at index `i` in `unicode_map` (`UNICODEMAP_ENABLE`)|
+|Key                   |Aliases  |Description                                                     |
+|----------------------|---------|----------------------------------------------------------------|
+|`UC(c)`               |         |Send Unicode code point `c`                                     |
+|`X(i)`                |         |Send Unicode code point at index `i` in `unicode_map`           |
+|`XP(i, j)`            |         |Send Unicode code point at index `i`, or `j` if Shift/Caps is on|
+|`UNICODE_MODE_FORWARD`|`UC_MOD` |Cycle through selected input modes                              |
+|`UNICODE_MODE_REVERSE`|`UC_RMOD`|Cycle through selected input modes in reverse                   |
+|`UNICODE_MODE_OSX`    |`UC_M_OS`|Switch to macOS input                                           |
+|`UNICODE_MODE_LNX`    |`UC_M_LN`|Switch to Linux input                                           |
+|`UNICODE_MODE_WIN`    |`UC_M_WI`|Switch to Windows input                                         |
+|`UNICODE_MODE_BSD`    |`UC_M_BS`|Switch to BSD input (not implemented)                           |
+|`UNICODE_MODE_WINC`   |`UC_M_WC`|Switch to Windows input using WinCompose                        |

docs/newbs_testing_debugging.md

@@ -13,9 +13,9 @@ Note: These programs are not provided by or endorsed by QMK.
 * [Keyboard Tester](http://www.keyboardtester.com) (Web Based)
 * [Keyboard Checker](http://keyboardchecker.com) (Web Based)
 
-## Debugging With QMK Toolbox
+## Debugging
 
-[QMK Toolbox](https://github.com/qmk/qmk_toolbox) will show messages from your keyboard if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
+Your keyboard will output debug information if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
 
 ```c
 void keyboard_post_init_user(void) {
@@ -27,6 +27,14 @@ void keyboard_post_init_user(void) {
 }
 ```
 
+### Debugging With QMK Toolbox
+
+For compatible platforms, [QMK Toolbox](https://github.com/qmk/qmk_toolbox) can be used to display debug messages from your keyboard.
+
+### Debugging With hid_listen
+
+Prefer a terminal based solution? [hid_listen](https://www.pjrc.com/teensy/hid_listen.html), provided by PJRC, can also be used to display debug messages. Prebuilt binaries for Windows,Linux,and MacOS are available.
+
 <!-- FIXME: Describe the debugging messages here. -->
 
 ## Sending Your Own Debug Messages
@@ -41,3 +49,51 @@ After that you can use a few different print functions:
 * `uprintf("%s string", var)`: Print a formatted string
 * `dprint("string")` Print a simple string, but only when debug mode is enabled
 * `dprintf("%s string", var)`: Print a formatted string, but only when debug mode is enabled
+
+## Debug Examples
+
+Below is a collection of real world debugging examples. For additional information, refer to [Debugging/Troubleshooting QMK](faq_debug.md).
+
+### Which matrix position is this keypress?
+
+When porting, or when attempting to diagnose pcb issues, it can be useful to know if a keypress is scanned correctly. To enable logging for this scenario, add the following code to your keymaps `keymap.c`
+
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // If console is enabled, it will print the matrix position and status of each key pressed
+#ifdef CONSOLE_ENABLE
+    uprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+#endif 
+  return true;
+}
+```
+
+Example output
+```text
+Waiting for device:.......
+Listening:
+KL: kc: 169, col: 0, row: 0, pressed: 1
+KL: kc: 169, col: 0, row: 0, pressed: 0
+KL: kc: 174, col: 1, row: 0, pressed: 1
+KL: kc: 174, col: 1, row: 0, pressed: 0
+KL: kc: 172, col: 2, row: 0, pressed: 1
+KL: kc: 172, col: 2, row: 0, pressed: 0
+```
+
+### How long did it take to scan for a keypress?
+
+When testing performance issues, it can be useful to know the frequency at which the switch matrix is being scanned. To enable logging for this scenario, add the following code to your keymaps `config.h`
+
+```c
+#define DEBUG_MATRIX_SCAN_RATE
+```
+
+Example output
+```text
+  > matrix scan frequency: 315
+  > matrix scan frequency: 313
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+```

docs/quantum_keycodes.md

@@ -1,6 +1,6 @@
 # Quantum Keycodes
 
-Quantum keycodes allow for easier customisation of your keymap than the basic ones provide, without having to define custom actions.
+Quantum keycodes allow for easier customization of your keymap than the basic ones provide, without having to define custom actions.
 
 All keycodes within quantum are numbers between `0x0000` and `0xFFFF`. Within your `keymap.c` it may look like you have functions and other special cases, but ultimately the C preprocessor will translate those into a single 4 byte integer. QMK has reserved `0x0000` through `0x00FF` for standard keycodes. These are keycodes such as `KC_A`, `KC_1`, and `KC_LCTL`, which are basic keys defined in the USB HID specification.
 
@@ -16,6 +16,11 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
 |`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
 |`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
+|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
+|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
+|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
+|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
 |`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |

docs/zh-cn/contributing.md

@@ -0,0 +1,205 @@
+# 如何做贡献
+
+👍🎉 首先感谢各位百忙之中抽空阅读本文档，并为我们无私奉献。给您点赞啦！ 🎉👍
+
+第三方的帮助让Q酱成长了许多呢，Q酱也从你们那学到了不少新东西。Q酱希望每一个想帮助我的人都能很方便的做出有用的贡献。在这里我给摩拳擦掌的你们写了一点引导，让你们的代码在不对我做重大改动的情况下都能成功的被采纳哦。
+
+* [项目概况](#项目概况)
+* [代码规范](#代码规范)
+* [一般教程](#一般教程)
+* [行为守则对于我来说有何意义?](#行为守则对于我来说有何意义?)
+
+## 这文章巨长无比不想读啊! 我就想问个问题而已!
+
+您要是想问关于Q酱的问题的话可以在[OLKB Subreddit](https://reddit.com/r/olkb)或者是[Discord](https://discord.gg/Uq7gcHh)随意问。
+
+请记住:
+
+* 维护Q酱的小可爱有的时候可能会有点忙，不能及时回答您的问题，耐心等等，他们都是很nice的人呀。
+* 维护Q酱的人都是很无私的善良的人。无论是贡献代码还是回答问题，都是义务的。有时见到他们努力回答各种问题，解决各种BUG，Q酱也是很心疼的。
+* 您可以看看下面的教程，可以让您的问题浅显易懂，更容易回答：
+  * https://opensource.com/life/16/10/how-ask-technical-questions
+  * http://www.catb.org/esr/faqs/smart-questions.html
+
+# 项目概况
+
+Q酱很大一部分是用C语言组成的，不过有一小部分特性是C++的。怎么说呢，都是我的一部分，两个我都爱。Q酱一般是在键盘上的嵌入式处理器那里工作的，尤其与AVR([LUFA](http://www.fourwalledcubicle.com/LUFA.php))和ARM ([ChibiOS](http://www.chibios.com))两小哥哥搭配，干活不累，嘻嘻。如果您精通Arduino的话您会发现很多熟悉的概念，但也有点不爽，因为您以前的经验可能没法用来帮助Q酱。
+
+<!-- 需要修正: 这里放些学习C语言的资源。另外感谢修正的小可爱。谢谢您了。-->
+
+# Q酱，我在哪能帮助你嘞?
+
+您要是有问题的话可以 [提出一个issue](https://github.com/qmk/qmk_firmware/issues) 或 [在Discord上交流一下](https://discord.gg/Uq7gcHh).
+
+# Q酱，我如何帮助你?
+
+您以前是否没为开源贡献过代码，而又想知道帮助Q酱是怎么一回事? 稍安勿躁，咱给您总结一下！
+
+0. 先注册一个 [GitHub](https://github.com) 账户。
+1. 做好一个你要贡献的布局，那就要 [找一个你想解决的问题](https://github.com/qmk/qmk_firmware/issues)，或者 [找一个你想添加的特性](https://github.com/qmk/qmk_firmware/issues?q=is%3Aopen+is%3Aissue+label%3Afeature)。
+2. 把关联着问题的仓库分叉（fork）到你的仓库。这样你在`你的GitHub用户名/qmk_firmware`就有一个仓库备份啦。
+3. 使用 `git clone https://github.com/此处添GitHub用户名/此处添仓库名.git`这个命令把仓库同步到你的电脑中。
+4. 您要是想开发一个新特性的话可以先创建一个issue和Q酱的维护者讨论一下您要做什么。
+5. 使用`git checkout -b 此处写分支名字（别用汉字）`命令来创建一个分支（branch）用于开发。
+6. 对要解决的问题或要添加的特性进行适当的更改。
+7. 使用 `git add 把改变的文件的目录写这里` 可以添加改变的文件内容到git用于管理工程状态的索引（快照）里。
+8. 使用 `git commit -m "这里写修改的相关信息"` 来描述你做出了什么修改。
+9. 使用 `git push origin 此处写分支名字`来把你的更改同步到GitHub库里（反正不是打篮球那个库里）。
+10. 提交一个[QMK 固件的pull request](https://github.com/qmk/qmk_firmware/pull/new/master)。
+11. 给你的pull request拟一个标题，包括简短的描述和问题或错误代码。比如, 你可以起一个这样的"Added more log outputting to resolve #4352"（最好用英语，毕竟Q酱的中文也不是那么的溜，有可能会看不懂中文）。
+12. 在描述（description）里面写你做了哪些更改，你的代码里还存在什么问题, 或者你想问维护的小可爱们的问题。你的your pull request有点小问题无伤大雅(本来也没有完美的代码嘛), 维护的小可爱们会竭尽全力帮您改进的！
+13. 维护人员审查代码可能需要一些时间。
+14. 维护人员会通知您要更改什么地方，然后您就按照建议改一改。
+15. 预祝您合并成功！
+
+# 代码规范
+
+其实也没有什么特别严格的规范啦，但是俗话说的好：没有规矩，不成方圆。您可以看一下您的要改动的代码周围的画风，然后保持队形。如果你感觉周围都不知道是什么牛鬼蛇神的话就看看下面的建议：
+
+* 我们用肆(4)个空格来缩进(软件中也可以设置到Tab键)
+* 我们使用改良的1TBS(允许单行样式)
+  * 左大括号: 在开放性语句块那行的末尾
+  * 右大括号: 和开放性语句块第一个字母对齐
+  * Else If: 将右大括号放在行的开头，下一个左大括号放在同一行的结尾
+  * 可选大括号: 可选大括号是必选的
+    * 应该这样: if (condition) { return false; }
+    * 不应该这样: if (condition) return false;
+* 建议使用C语言风格的注释: `/* */`
+  * 把注释想象成一个描述特征的故事
+  * 充分使用注释来描述你为何这样修改
+  * 有些公认的东西就不要写到注释里面了
+  * 如果你不知道注释是否多余,看下面
+* 一般不要主动换行，主动换行的话每行不要超过76列
+* 要把 `#pragma once` 放到头文件的开始哦，抛弃老土的(`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)吧
+* 下面两种预处理命令都可以用: `#ifdef DEFINED` 还有 `#if defined(DEFINED)`
+  * 以上那句对处女座不是很友好哈，处女座的朋友们就别纠结了，直接 `#if defined(DEFINED)` 。
+  * 还有就是选好一种风格就一直用，一直用一直爽，不要朝三暮四, 除非你要变化到多重条件的 `#if`。
+  * `#` 和 `if`要挨在一起哦，再让本空格在中间冒充电灯泡本空格会生气的。
+  * 以下是缩进规则:
+    * 首先考虑可读性，强迫症的朋友们总想要保持代码的高一致性，这样可不好。
+    * 保证文件已有风格不变。如果代码本来就是杂糅风格，那就见机行事，让你的修改更有意义些。
+    * 其实你也可以在缩进的时候看看周围其他代码，然后范水模山，预处理命令可以有自己的缩进风格。
+
+可以参照下面:
+
+```c
+/* foo 的 Enums*/
+enum foo_state {
+  FOO_BAR,
+  FOO_BAZ,
+};
+
+/* 有返回值的情况 */
+int foo(void) {
+  if (some_condition) {
+    return FOO_BAR;
+  } else {
+    return -1;
+  }
+}
+```
+
+# Clang-format的自动格式化
+[Clang-format](https://clang.llvm.org/docs/ClangFormat.html) 是LLVM的一部分，可以帮你自动格式化代码。我们给你准备好了一个适用于以上规范的配置文件，会帮你调整缩进和换行，你只需要写好括号就好。有了它，你再也不用担心调整代码格式太耗时，没有时间陪伴自己（虚构）的另一半了。
+
+使用[LLVM 完整安装](http://llvm.org/builds/)可以在Windows上安装clang-format, Ubuntu用户要用`sudo apt install clang-format`。
+
+命令行的朋友们, 加上 `-style=file`选项就会自动在QMK的根目录寻找.clang-format配置文件了。
+
+VSCode用户, 标准的 C/C++ 插件就支持clang-format, 或者可以用[独立扩展](https://marketplace.visualstudio.com/items?itemName=LLVMExtensions.ClangFormat)也行。
+
+有些东西(比如LAYOUT宏) 会被clang-format打乱，所以那些文件就别用clang-format了,这里就教您一个小窍门，在`// clang-format off` 和 `//clang-format on`之间装上会被搞乱的代码就好了。
+
+# 一般教程
+
+你可以给Q酱的不同部分添砖加瓦，但也要用不同的方法严谨检查。不论你修改哪里最好还是看看下边。
+
+* 将PR（pull request）分成一个个的逻辑单元。 比如，不要一次将两个新特性PR出去。要添加的特性排好队，一个一个来。
+* 提交之前看一眼，`git diff --check`的空格一定要写对了
+* 确定你的代码能通过编译
+  * 布局: 确定`make keyboard:your_new_keymap` 不返回错误
+  * 键盘: 确定 `make keyboard:all` 不返回错误
+  * 核心代码: 确定 `make all` 不返回错误
+* 提交的信息尽量明确。第一行写点简短介绍(每行不多于70个英文字母), 第二行空着,第三行和后面就要写些必要的细节了。最好用英文写，比如:
+
+```
+Adjust the fronzlebop for the kerpleplork
+
+The kerpleplork was intermittently failing with error code 23. The root cause was the fronzlebop setting, which causes the kerpleplork to activate every N iterations.
+
+Limited experimentation on the devices I have available shows that 7 is high enough to avoid confusing the kerpleplork, but I'd like to get some feedback from people with ARM devices to be sure.
+```
+
+## 文档
+
+想帮助Q酱当然是先看文档最简单了。找到这个文档哪里错了然后改正它对于你来说超级简单! 我们也对有写文档能力的人求贤若渴，如果你是对的人[点这个](#Q酱，我在哪能帮助你嘞?)!
+
+文档呢，都静静的放在`qmk_firmware/docs` 目录里, 也或者您想为网页做贡献的话也是可以的哦。
+
+在文档中附代码案例时, 先观察文档其他地方的命名规范。比如, 把enums的名字都改成像`my_layers`或者`my_keycodes`来防止名字不一致的enums被当作特务枪毙:
+
+```c
+enum my_layers {
+  _FIRST_LAYER,
+  _SECOND_LAYER
+};
+
+enum my_keycodes {
+  FIRST_LAYER = SAFE_RANGE,
+  SECOND_LAYER
+};
+```
+
+## 布局
+
+大多数QMK新手都从创建一个自己的布局开始。我们尽力保证布局规范宽松 (毕竟布局是个性的体现) 不过建议遵守以下准则，这样可以让别人更好理解你的代码
+
+* 用 [模板](documentation_templates.md)写个`readme.md`。
+* 所有的布局PR都会被squash, 如果你想知道你的提交是怎么被squash的那你就自己来吧
+* 不要把新特性和布局一起PR。可以分别PR他们
+* 布局文件夹就不要放`Makefile`了，这个操作都过时啦
+* 更新文件头部的copyrights(看`%YOUR_NAME%`那)
+
+## 键盘
+
+QMK的最终归宿是键盘。有些键盘是社区维护的，有一些是制作这些键盘的人维护的。`readme.md`会告诉你是谁维护了这个键盘，如果你对某个键盘有疑问，可以 [创建一个Issue](https://github.com/qmk/qmk_firmware/issues) 来问一问维护者。
+
+我们建议你按下面的来操作:
+
+* 用[模板](documentation_templates.md)写`readme.md`。
+* 提交数量尽量合理，不然我们可就要把你的PR给squash了。
+* 不要把新特性和新键盘一起PR。可以分别PR他们
+* 用父文件夹的名字命名 `.c`/`.h`文件, 比如`/keyboards/<kb1>/<kb2>/<kb2>.[ch]`
+* 键盘文件夹就不要放`Makefile`了，这个操作都过时啦
+* 更新文件头部的copyrights(看`%YOUR_NAME%`那)
+
+## Quantum/TMK 核心
+
+在您废寝忘食地开发Q酱新特性或者帮Q酱驱虫之前，一定要确保你的工作是有意义的。看看[了解QMK](understanding_qmk.md)你会对Q酱有更深的了解，这个文档将带你领略QMK的程序流程。现在你应该和维护团对谈谈来了解实现你想法的最佳方法了。一下渠道都可以：
+
+* [在Discord交流](https://discord.gg/Uq7gcHh)
+* [建立一个Issue](https://github.com/qmk/qmk_firmware/issues/new)
+
+新特性和BUG的修复影响所有键盘。开发组也在翻修QMK。所以，在实施重大返修之前一定要讨论一下。如果你在没有事先与维护团队沟通的情况下提交了一个PR，而且你的选择与维护团队的计划方向不符，那你可能要面临大改了。
+
+修复BUG或者开发新特性之前看看这个：
+
+* **默认不启用** - QMK运行的芯片多数内存有限，所以首要考虑的还应该是布局不要被破坏，于是特性默认是不启用的。你喜欢什么特性的话就打开它，如果你觉得有些特性应该默认开启或者你能帮助缩减代码，那就联系维护组吧。
+* **提交之前在本地编译** - 这个简直就是家喻户晓了，但是也确实需要编译啊！ 我们的Travis系统会发现一切问题，但是自己编译一下可要比在线等快多了。
+* **注意版本和芯片平台** - 有那么几个键盘有支持不同配置甚至是不同芯片的版本。试着写一个能AVR和ARM两个平台运行的特性，或者在不支持的平台自动禁用。
+* **解释你的新特性** - 在`docs/`写个文档, 你可以创建新文档或者写到现有文档中。如果你不把它记录下来，其他人就无法从你的努力中获益。
+
+也可以看看以下建议：
+
+* 提交数量尽量合理，不然我们可就要把你的PR给squash了。
+* 不要把新特性、布局和键盘一起PR。可以分别PR他们。
+* 给你的特性写[单元测试](unit_testing.md)。
+* 你编辑的文件风格要一致，如果风格不明确或者是混搭风的，你就要先看看[代码规范](#代码规范)确认情况。
+
+## 重构
+
+为了保持QMK脉络清晰，Q酱打算深入规划重构一下自己，然后让合作者进行修改。如果你有重构的思路或建议[创建一个issue](https://github.com/qmk/qmk_firmware/issues), Q酱很乐意讨论一下怎么改进一下。
+
+# 行为守则对于我来说有何意义?
+
+我们的[行为守则](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) 是说明您有责任尊重和礼貌地对待项目中的每个人，无论他们的身份如何。 如果你是我们行为准则所描述的不当行为的受害者，我们将站在你这边，并按照行为准则对施暴者进行适当谴责。

docs/zh-cn/faq.md

@@ -0,0 +1,6 @@
+# 常见问题
+
+* [一般问题](faq_general.md)
+* [构建和编译QMK](faq_build.md)
+* [QMK调试和故障排除](faq_debug.md)
+* [布局问题](faq_keymap.md)

docs/zh-cn/getting_started_getting_help.md

@@ -0,0 +1,15 @@
+# 获得帮助
+
+有很多方法来获得关于QMK的帮助.
+
+## 实时聊天
+
+你可以在我们的主要[Discord服务器](https://discord.gg/Uq7gcHh)找到QMK的开发者和用户。有很多讨论固件的不同频道, 工具箱(Toolbox), 硬件,配置工具(configurator).
+
+## OLKB Subreddit
+
+QMK的官方论坛是[/r/olkb](https://reddit.com/r/olkb) 在[reddit.com](https://reddit.com)上.
+
+## Github的Issue
+
+你可以在GitHub上 [提出issue](https://github.com/qmk/qmk_firmware/issues).当您的问题需要长期讨论或调试时，这尤其方便。

docs/zh-cn/getting_started_github.md

@@ -0,0 +1,59 @@
+# 如何在QMK中使用Github
+
+Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
+
+?> 本教程假设您已安装GitHub，并且您喜欢使用命令行工作。
+
+首先 [Github上的QMK页面](https://github.com/qmk/qmk_firmware), 您能看到右上方有个按钮写着"Fork":
+
+![从Github上分叉](http://i.imgur.com/8Toomz4.jpg)
+
+如果你是某组织成员，你将需要选择分叉到哪个账户。一般情况下, 你是想要分叉到你的私人账户下。当你完成分叉 (有时需要等一会), 点击"Clone or Download" 按钮:
+
+!从Github下载](http://i.imgur.com/N1NYcSz.jpg)
+
+你要选择 "HTTPS", 然后选择链接复制:
+
+![HTTPS链接](http://i.imgur.com/eGO0ohO.jpg)
+
+然后，在命令行输入`git clone `，然后粘贴你的链接:
+
+```
+user@computer:~$ git clone https://github.com/whoeveryouare/qmk_firmware.git
+Cloning into 'qmk_firmware'...
+remote: Counting objects: 46625, done.
+remote: Compressing objects: 100% (2/2), done.
+remote: Total 46625 (delta 0), reused 0 (delta 0), pack-reused 46623
+Receiving objects: 100% (46625/46625), 84.47 MiB | 3.14 MiB/s, done.
+Resolving deltas: 100% (29362/29362), done.
+Checking out files: 100% (2799/2799), done.
+```
+
+现在你本地计算机有QMK的分叉了,你可以添加你的布局了, 为你的键盘编译并刷新固件吧。如果你觉得你的修改很不错, 你可以添加,提交,然后想你的分叉推出（pull）你的改变，像这样:
+
+```
+user@computer:~$ git add .
+user@computer:~$ git commit -m "adding my keymap"
+[master cccb1608] adding my keymap
+ 1 file changed, 1 insertion(+)
+ create mode 100644 keyboards/planck/keymaps/mine/keymap.c
+user@computer:~$ git push
+Counting objects: 1, done.
+Delta compression using up to 4 threads.
+Compressing objects: 100% (1/1), done.
+Writing objects: 100% (1/1), 1.64 KiB | 0 bytes/s, done.
+Total 1 (delta 1), reused 0 (delta 0)
+remote: Resolving deltas: 100% (1/1), completed with 1 local objects.
+To https://github.com/whoeveryouare/qmk_firmware.git
+ + 20043e64...7da94ac5 master -> master
+```
+
+现在你的改动已经在你Github上的分支中了 - 如果你回到这 (`https://github.com/你的GitHub账户名/qmk_firmware`) ,你可以点击下方所示按钮创建 "New Pull Request":
+
+![新的 Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
+
+现在你可以看到你所做的一切 - 如果看起来不错, 就可以点击 "Create Pull Request"定稿了:
+
+![创建Pull Request](http://i.imgur.com/Ojydlaj.jpg)
+
+提交后,我们会开跟你说你的改动,要求您进行更改, 并最终接受您的更改!感谢您为QMK做的贡献 :)

docs/zh-cn/getting_started_introduction.md

@@ -0,0 +1,54 @@
+# 介绍
+
+本页解释了使用QMK项目所需的基本信息。它假定您能熟练使用Unix shell，但您不熟悉C语言也不熟悉使用make编译。
+
+## 基本QMK结构
+
+QMK是[Jun Wako](https://github.com/tmk)的[tmk_keyboard](https://github.com/tmk/tmk_keyboard)工程的一个分叉。经过更改的TMK原始代码放在`tmk` 文件夹中。 QMK增加的新东西可以在 `quantum` 文件夹中找到。 键盘项目可以在 `handwired`（手动飞线） 和 `keyboard`（PCB键盘）这两个文件夹找到。
+
+### 用户空间结构
+
+在`users`文件夹里面的目录是每个用户的目录。这个文件夹里面放的是用户们在不同键盘都能用到的代码。详见[用户空间特性](feature_userspace.md) 
+
+### 键盘项目结构
+
+在`keyboards`文件夹和他的子文件夹`handwired`中就是各个键盘的项目了，比如`qmk_firmware/keyboards/clueboard`。内部结构与如下:
+
+* `keymaps/`: 可以构建的不同布局
+* `rules.mk`: 用来设置 "make" 命令默认选项的文件。别直接编辑这个文件,你应该使用具体某个布局的 `rules.mk`.
+* `config.h`: 用于设置默认编译选项的文件。别直接编辑这个文件, 你应该使用具体某个布局的 `config.h`.
+
+### 布局结构
+
+在各个布局的文件夹，你能找到以下文件。只有 `keymap.c` 是必要的, 如果其他文件找不到就会直接选择默认选项。
+
+* `config.h`: 配置布局的选项
+* `keymap.c`: 布局的全部代码, 必要文件
+* `rules.mk`: 使能的QMK特性
+* `readme.md`:介绍你的布局,告诉别人怎么使用，附上功能说明。请将图片上传到imgur等图床（译者注：imgur可能已被墙，为了方便国人访问，建议使用国内可以直接访问的图床）。
+
+# `config.h` 文件
+
+有三个重要的`config.h` 位置:
+
+* 键盘 (`/keyboards/<keyboard>/config.h`)
+* 用户空间 (`/users/<user>/config.h`)
+* 布局 (`/keyboards/<keyboard>/keymaps/<keymap>/config.h`)
+
+构建系统按照上述顺序自动获取配置文件。如果要覆盖由上一个 `config.h` 所做的设置，您需要首先为要更改的设置包含一些样板代码。
+
+```
+#pragma once
+```
+
+要覆盖上一个 `config.h` 所做的设置，你要先 `#undef` 然后再 `#define` 这个设置.
+
+样板代码和设置看起来像这样：
+
+```
+#pragma once
+
+// 像下面那样覆盖设置（MY_SETTING指的是你要覆盖的设置项）!
+#undef MY_SETTING
+#define MY_SETTING 4
+```

docs/zh-cn/newbs.md

@@ -0,0 +1,23 @@
+# QMK菜鸟教程
+
+QMK是为你机械硬盘设计的的一个强大的开源固件。使用QMK可以很简单的让你的定制键盘变得强大。看完这篇文章，无论你是菜鸟还是大佬，都可以顺利的使用QMK来定制键盘。
+
+你是否为不知道你的键盘能不能运行QMK而苦恼? 如果你的机械键盘是你自己做的，那么这把键盘一般可以运行QMK。我们提供了[一大堆自制键盘](http://qmk.fm/keyboards/), 所以即便你的键盘不能运行QMK你也很容易能找到满足你需求的键盘。
+
+## 概览
+
+这个教程有7个主要部分：
+
+* [新手上路](newbs_getting_started.md)
+* [用命令行构建你的第一个固件](newbs_building_firmware.md)
+* [用在线界面构建你的第一个固件](newbs_building_firmware_configurator.md)
+* [刷新固件](newbs_flashing.md)
+* [测试和调试](newbs_testing_debugging.md)
+* [Git最佳实践](newbs_best_practices.md)
+* [其他学习资源](newbs_learn_more_resources.md)
+
+这份教程旨在帮助没有固件构建经验的人，也是根据该目的做出选择和建议。这些程序有很多替代方法，大部分替代我们都支持。如果你对完成一个任务有疑问，可以[向我们寻求帮助](getting_started_getting_help.md).
+
+## 其他资源
+
+* [Thomas Baart的 QMK基础博客](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – 这是一个用户创建的博客，涵盖了为新手准备的使用QMK的基础知识。

docs/zh-cn/newbs_best_practices.md

@@ -0,0 +1,163 @@
+# 最佳实践
+
+## 或者说, "我应如何学会不再担心并开始爱上Git。"
+
+本文档旨在指导新手以最佳方式获得为QMK做出贡献的丝滑体验。我们将介绍为QMK做出贡献的过程，详细介绍使这项任务更容易的一些方法，然后我们将制造一些问题，来教你如何解决它们。
+
+本文假设了一些内容:
+
+1. 一有个GitHub账户, 并[创建qmk_firmware仓库分叉](getting_started_github.md)到你的帐户.
+2. 你已经[建立你的构建环境](newbs_getting_started.md?id=environment-setup).
+
+
+## 你分叉的主分支: 一直在上传，但不要提交
+
+十分推荐您在QMK开发过程中无论开发是否完成都要保持你的 `master` 分支更新，但是 ***一定不要*** 提交。相反，你应该在一个开发分叉中做出你所有修改并在开发时提交pull request。
+
+减少合并冲突的可能性 — 两个或多个用户同时编辑文件的同一部分的实例 — 保持 `master` 分支最新，并创建一个新的分支来开始新的开发。
+
+### 更新你的主分支
+
+保持你的 `master` 更新, 推荐你添加QMK Firmware仓库作为Git的远程仓库，想这么做的话, 你可以打开你的Git命令行接口然后输入:
+
+```
+git remote add upstream https://github.com/qmk/qmk_firmware.git
+```
+
+运行 `git remote -v`, 来确定这个仓库已经添加，以下是回显:
+
+```
+$ git remote -v
+origin  https://github.com/<your_username>/qmk_firmware.git (fetch)
+origin  https://github.com/<your_username>/qmk_firmware.git (push)
+upstream        https://github.com/qmk/qmk_firmware.git (fetch)
+upstream        https://github.com/qmk/qmk_firmware.git (push)
+```
+
+现在添加已完成，你可以用`git fetch upstream`来检查仓库的更新. 这会检索branches 和 tags &mdash; 统称为"refs" &mdash; 从QMK仓库, 也就是 `upstream`。我们可以比较我们的分叉和QMK的 `origin` 数据的不同。
+
+要更新你的分叉的主分支，请运行以下命令，在每行之后按Enter键:
+
+```
+git checkout master
+git fetch upstream
+git pull upstream master
+git push origin master
+```
+
+这回切换到你的`master` 分支, 检索你QMK仓库的refs, 下载当前QMK `master` 分支到你的电脑, 并上传到你的分叉.
+
+### 做改动
+
+你可以输入以下命令来创建一个新的分支来做改动:
+
+```
+git checkout -b dev_branch
+git push --set-upstream origin dev_branch
+```
+
+这回建立一个叫做 `dev_branch`的新分支, 检查一下, 然后想你的分叉保存分支. 使用 `--set-upstream` 参数来告诉git使用你的分叉并且当每次你对你的分支用`git push` 或 `git pull`时要使用`dev_branch`。 它仅需要在第一次push的时候使用；然后你就可以很安全的用 `git push` 或 `git pull`, 并不需要其他参数了。
+
+!> 使用 `git push`, 你可以用 `-u` 来代替 `--set-upstream` &mdash; `-u`是`--set-upstream`的简写。
+
+您可以将您的分支命名为您想要的任何名称，但建议将其命名为与您要进行的更改相关的内容。
+
+默认情况下 `git checkout -b` 在已经检出的分支上建立新的分支。您可以将新的分支建立在未检出的现有分支的基础上，方法是将现有分支的名称添加到命令：
+
+```
+git checkout -b dev_branch master
+```
+
+现在您已经有了一个开发分支，那么就打开您的文本编辑器并进行您需要做的任何更改。建议对您的分支进行许多小的提交；这样，任何引起问题的更改都可以在需要时更容易地跟踪和撤消。要进行更改，编辑并保存任何需要更新的文件，请将它们添加到Git的 *staging area* ，然后将它们提交到您的分支：
+
+```
+git add path/to/updated_file
+git commit -m "My commit message."
+```
+
+` git add`添加已更改到Git的*临时区域*也就是Git的“加载区域”的文件。其中包含使用 `git commit` 命令 *提交* 的并已经保存到仓库的更改。建议您使用描述性的提交消息，这样您就可以一目了然地知道更改了什么。
+
+!> 如果你修改了很多文件，但所有的文件都是同一个更改的一部分，你可以用 `git add .` 来添加当前目录中所有已更改的文件而不是单独添加每个文件.
+
+### 发布更改
+
+最后一步是将更改推送到您的分叉。 输入 `git push`来推送. 现在Git将`dev_branch`的当前状态发布到您的分叉。
+
+
+## 解决合并冲突
+
+有时，当您在某个分支中的工作需要很长时间才能完成时，其他人所做的更改与您在打开pull request时对该分支所做的更改相冲突。这称为*rebase* 即合并冲突，当多个人编辑同一文件的同一部分时会发生这种情况。
+
+### 重新调整您的更改
+
+*rebase*是Git的一种方法，它获取在某一点上应用的更改，撤销它们，然后将相同的更改应用到另一点。在合并冲突的情况下，您可以重新设置您的分支以获取在创建分支时和当前时间之间的那段时间所做的更改。
+
+运行以下命令来开始：
+
+```
+git fetch upstream
+git rev-list --left-right --count HEAD...upstream/master
+```
+
+ 这里的`git rev-list` 命令返回当前分支和qmk的主分支之间不同的提交数。我们首先运行`git fetch`，以确保我们有代表upstream仓库的refs。 `git rev-list` 命令的回显有两个数字：
+
+```
+$ git rev-list --left-right --count HEAD...upstream/master
+7       35
+```
+
+第一个数字表示自创建以来当前分支的提交数, 第二个数字是自创建当前分支以来对 `upstream/master` 进行的提交数, 因此, 当前分支中未记录变动。
+
+既然知道当前分支和upstream仓库的当前状态，我们可以开始一个rebase操作：
+
+```
+git rebase upstream/master
+```
+
+这就是让Git撤销当前分支上的提交，然后根据QMK的主分支重新应用它们。
+
+```
+$ git rebase upstream/master
+First, rewinding head to replay your work on top of it...
+Applying: Commit #1
+Using index info to reconstruct a base tree...
+M       conflicting_file_1.txt
+Falling back to patching base and 3-way merge...
+Auto-merging conflicting_file_1.txt
+CONFLICT (content): Merge conflict in conflicting_file_1.txt
+error: Failed to merge in the changes.
+hint: Use 'git am --show-current-patch' to see the failed patch
+Patch failed at 0001 Commit #1
+
+Resolve all conflicts manually, mark them as resolved with
+"git add/rm <conflicted_files>", then run "git rebase --continue".
+You can instead skip this commit: run "git rebase --skip".
+To abort and get back to the state before "git rebase", run "git rebase --abort".
+```
+
+这告诉我们有一个合并冲突，并给出带有冲突的文件的名称。在文本编辑器中打开冲突的文件，在该文件的某个位置，您会发现如下内容：
+
+```
+<<<<<<< HEAD
+<p>For help with any issues, email us at support@webhost.us.</p>
+=======
+<p>Need help? Email support@webhost.us.</p>
+>>>>>>> Commit #1
+```
+
+ `<<<<<<< HEAD`行标记合并冲突的开始, `>>>>>>> Commit #1` 行标记结束, 冲突选项被 `=======`分隔。`HEAD`那端的部分来自文件的qmk master版本，标记有commit消息的部分来自当前的分支持和提交。
+
+因为Git跟踪 *对文件的更改* 而不是直接跟踪文件的内容，所以如果Git在提交之前找不到文件中的文本，它将不知道如何编辑该文件。重新编辑文件将解决冲突。进行更改，然后保存文件。
+
+```
+<p>Need help? Email support@webhost.us.</p>
+```
+
+现在运行:
+
+```
+git add conflicting_file_1.txt
+git rebase --continue
+```
+
+Git记录对冲突文件的更改，并继续应用来自我们的分支的提交，直到它到达末尾。

docs/zh-cn/newbs_building_firmware.md

@@ -0,0 +1,81 @@
+# 构建第一个固件
+
+现在您已经建立了构建环境，就可以开始构建自定义固件了。对于本指南的这一部分，我们将在3个程序之间切换——文件管理器、文本编辑器和终端窗口。请保持所有3个程序打开，直到您完成并对键盘固件满意。
+
+如果您在按照指南第一部分的操作之后关闭并重新打开了终端窗口，请不要忘记输入“cd qmk_firmware”，来使您的终端位于正确的目录。
+
+## 导航到您的keymaps文件夹
+
+首先导航到键盘的 `keymaps` 文件夹.
+
+?> 如果您使用的是MacOS或Windows，可以使用以下命令轻松地打开keymaps文件夹。
+
+?> macOS:
+
+    open keyboards/<keyboard_folder>/keymaps
+
+?> Windows:
+
+    start .\\keyboards\\<keyboard_folder>\\keymaps
+
+## 创建`default` 布局副本
+
+打开`keymaps`文件夹后，您将需要创建`default`文件夹的副本。我们强烈建议您将文件夹命名为与Github用户名相同的名称，但您也可以使用任何您想使用的名称，只要它只包含小写字母、数字和下划线字符。
+
+要自动执行此过程，您还可以选择运行`new_keymap.sh`脚本。
+
+导航到`qmk_firmware/util` 目录然后输入以下命令：
+
+```
+./new_keymap.sh <keyboard path> <username>
+```
+
+例如，一个名字叫ymzcdg的用户要创建1up60hse的布局，他需要输入
+
+```
+./new_keymap.sh 1upkeyboards/1up60hse ymzcdg
+```
+
+## 在你最钟爱的文本编辑器中打开`keymap.c`
+
+打开你的`keymap.c`. 在这个文件中，您可以找到控制键盘行为的结构。 在你的`keymap.c` 的顶部有一些让布局更易读的define和enum。在靠下的位置你会找到一行和下面这句很像的:
+
+    const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+从这一行开始便是层列表。这行下面你会看到包括 `LAYOUT` 或 `KEYMAP`这两个词的几行, 从这些行开始就是层。在这一行下面是组成该特定层的键的列表。
+
+!> 编辑您的keymap文件时，注意不要添加或删除任何逗号。如果这样做，您将阻止您的固件编译，并且您可能不容易找出多余的或缺少的逗号在哪里。
+
+## 根据您的喜好自定义布局
+
+如何完成这一步骤完全取决于您。改变一直困扰着你的问题，或者完全重做所有的事情。如果您不需要全部图层，可以删除图层，或者将图层总数增加到32个。查看以下文档，了解可以在此处定义的内容:
+
+* [键码](keycodes.md)
+* [特性](features.md)
+* [问题与解答](faq.md)
+
+?> 当你明白布局是怎么工作时，您也要让每次改变尽可能小。一次改变很大在调试时找出问题会十分困难。
+
+## 构建你的固件
+
+完成对布局的更改后，您就要构建固件了。为此，请返回终端窗口并运行build命令:
+
+    make <my_keyboard>:<my_keymap>
+
+例如，如果您的keymap名为“xyverz”，并且您正在为rev5 planck构建一个keymap，那么您将使用此命令：
+
+    make planck/rev5:xyverz
+
+在编译过程中，你将看到屏幕上有很多输出，通知您正在编译哪些文件他应该以与下文类似的输出结束:
+
+```
+Linking: .build/planck_rev5_xyverz.elf                                                              [OK]
+Creating load file for flashing: .build/planck_rev5_xyverz.hex                                      [OK]
+Copying planck_rev5_xyverz.hex to qmk_firmware folder                                               [OK]
+Checking file size of planck_rev5_xyverz.hex                                                        [OK]
+ * File size is fine - 18392/28672
+```
+
+## 刷新你的固件
+
+请移步 [Flashing Firmware](newbs_flashing.md) 来继续。

docs/zh-cn/newbs_flashing.md

@@ -0,0 +1,307 @@
+# 刷新你的键盘 
+
+现在您已经构建了一个自定义固件文件，那么您就需要刷新键盘了。
+
+## 用QMK工具箱刷新键盘
+
+刷新键盘的最简单方法是使用[QMK 工具箱](https://github.com/qmk/qmk_toolbox/releases). 
+
+但是，QMK工具箱目前仅适用于Windows和MacOS。如果您使用的是Linux（或者只是希望从命令行刷新固件），则必须使用 [方法概述](newbs_flashing.md#flash-your-keyboard-from-the-command-line).
+
+### 将文件加载到QMK工具箱中
+
+首先打开QMK工具箱应用程序。您将要在访达或资源管理器中找到固件文件。您的键盘固件可能是两种格式之一`.hex`或`.bin`。qmk会尝试将键盘的相应文件复制到“qmk_firmware”根目录中。
+
+?> 如果您在Windows或MacOS上，可以使用以下命令轻松地在资源管理器或访达中打开当前固件文件夹。
+
+?> Windows:
+
+    start .
+
+?> macOS:
+
+    open .
+
+固件文件始终遵循此命名格式:
+
+    <keyboard_name>_<keymap_name>.{bin,hex}
+
+例如，使用 `default` 布局的 `plank/rev5` 将使用以下名字：
+
+    planck_rev5_default.hex
+
+找到固件文件后，将其拖到QMK工具箱中的“Local file”框中，或单击“Open”并导航到固件文件的存储位置。
+
+### 将键盘置于DFU（Bootloader）模式
+
+要刷新自定义固件，您必须将键盘置于特殊的刷新模式。在此模式下，您将无法键入或使用键盘。在写入固件时，不要拔下键盘插头或以其他方式中断刷新过程，这一点非常重要。
+
+不同的键盘有不同的方式进入这种特殊模式。如果您的键盘当前运行的是QMK或TMK，而您没有得到特定的指示，请按顺序尝试以下操作:
+
+* 按住两个shift键并按 `Pause`
+* 按住两个shift键并按 `B`
+* 拔下键盘插头, 同时按住空格键和 `B` , 插上键盘然后等一会再放开按键
+* 按下PCB底部的 `RESET` 物理键
+* 找到PCB上标记有 `BOOT0` 或 `RESET`的金属点, 在插入PCB的同时短接它们
+
+成功后，您将在QMK工具箱中看到类似以下内容的消息:
+
+```
+*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
+*** DFU device connected
+```
+
+### 刷新你的键盘
+
+单击QMK工具箱中的 `Flash` 按钮。您将看到类似以下内容的输出:
+
+```
+*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
+*** DFU device connected
+*** Attempting to flash, please don't remove device
+>>> dfu-programmer atmega32u4 erase --force
+    Erasing flash...  Success
+    Checking memory from 0x0 to 0x6FFF...  Empty.
+>>> dfu-programmer atmega32u4 flash /Users/skully/qmk_firmware/clueboard_66_hotswap_gen1_skully.hex
+    Checking memory from 0x0 to 0x55FF...  Empty.
+    0%                            100%  Programming 0x5600 bytes...
+    [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
+    0%                            100%  Reading 0x7000 bytes...
+    [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
+    Validating...  Success
+    0x5600 bytes written into 0x7000 bytes memory (76.79%).
+>>> dfu-programmer atmega32u4 reset
+    
+*** DFU device disconnected
+*** Clueboard - Clueboard 66% HotSwap connected -- 0xC1ED:0x2390
+```
+
+## 使用命令行刷新键盘
+
+首先，您需要知道您的键盘使用的是哪个bootloader。通常是以下四个常见的bootloader。Pro-Micro 和 clones 使用 CATERINA, Teensy 使用 Halfkay, OLKB 键盘使用 QMK-DFU, 其他的atmega32u4芯片使用DFU。
+
+您可以在以下文章中了解更多关于bootloader[刷新指令和Bootloader信息](flashing.md)。 
+
+如果您知道正在使用的bootloader是哪种，那么在编译固件时，可以向“make”命令里添加一些额外参数，以自动执行刷新过程。
+
+### DFU
+
+对于DFU引导加载程序，当您准备好编译和刷新固件时，打开终端窗口并运行构建命令: 
+
+    make <my_keyboard>:<my_keymap>:dfu
+
+例如，如果您的布局名为“xyverz”，并且您正在为rev5 planck构建一个布局，那么您可以使用此命令：
+
+    make planck/rev5:xyverz:dfu
+
+编译完成后，应输出以下内容：
+
+```
+Linking: .build/planck_rev5_xyverz.elf                                                              [OK]
+Creating load file for flashing: .build/planck_rev5_xyverz.hex                                      [OK]
+Copying planck_rev5_xyverz.hex to qmk_firmware folder                                               [OK]
+Checking file size of planck_rev5_xyverz.hex                                                        
+ * File size is fine - 18574/28672
+ ```
+
+到了这个时候, 构建脚本将每隔5秒查找一次DFU。它将重复以下操作，直到找到设备或将其取消。
+
+    dfu-programmer: no device present.
+    Error: Bootloader not found. Trying again in 5s.
+
+一旦出现以上回显，您将需要重置控制器。然后，它应该显示与以下类似的输出：
+
+```
+*** Attempting to flash, please don't remove device
+>>> dfu-programmer atmega32u4 erase --force
+    Erasing flash...  Success
+    Checking memory from 0x0 to 0x6FFF...  Empty.
+>>> dfu-programmer atmega32u4 flash /Users/skully/qmk_firmware/clueboard_66_hotswap_gen1_skully.hex
+    Checking memory from 0x0 to 0x55FF...  Empty.
+    0%                            100%  Programming 0x5600 bytes...
+    [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
+    0%                            100%  Reading 0x7000 bytes...
+    [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
+    Validating...  Success
+    0x5600 bytes written into 0x7000 bytes memory (76.79%).
+>>> dfu-programmer atmega32u4 reset
+```
+
+如果您对此有任何问题，您可能需要这样做：
+
+    sudo make <my_keyboard>:<my_keymap>:dfu
+
+#### DFU命令
+
+有许多DFU命令可用于将固件下载到DFU设备：
+
+* `:dfu` - 这是正常选项，等待DFU设备可用，然后刷新固件。这将每隔5秒检查一次，以查看是否出现了DFU设备。
+* `:dfu-ee` - 这将刷新一个`eep`文件，而不是普通的十六进制文件。这很不常见。
+* `:dfu-split-left` - 这将刷新正常固件，就像默认选项 (`:dfu`)一样. 但是，这也会刷新“左侧”EEPROM文件，用于分割键盘。 _这是基于Elite C的键盘的推荐选择。_
+* `:dfu-split-right` - 这将刷新正常固件，就像默认选项(`:dfu`). 但是，这也会刷新“右侧”EEPROM文件，用于分割键盘。 _这是基于Elite C的键盘的推荐选择。_
+
+
+### Caterina 
+
+对于Arduino板以及其克隆版来说(比如SparkFun和ProMicro), 准备好编译和刷新固件后，打开终端窗口并运行构建命令: 
+
+    make <my_keyboard>:<my_keymap>:avrdude
+
+比如, 你的布局叫"xyverz"你要创建一个rev2 Lets Split的布局,你要用以下命令:
+
+    make lets_split/rev2:xyverz:avrdude
+
+固件完成编译后，它将输出类似以下的内容: 
+
+```
+Linking: .build/lets_split_rev2_xyverz.elf                                                            [OK]
+Creating load file for flashing: .build/lets_split_rev2_xyverz.hex                                    [OK]
+Checking file size of lets_split_rev2_xyverz.hex                                                      [OK]
+ * File size is fine - 27938/28672
+Detecting USB port, reset your controller now..............
+```
+
+此时，复位，然后脚本将检测bootloader，然后刷新固件。输出应该像这样:
+
+```
+Detected controller on USB port at /dev/ttyS15
+
+Connecting to programmer: .
+Found programmer: Id = "CATERIN"; type = S
+    Software Version = 1.0; No Hardware Version given.
+Programmer supports auto addr increment.
+Programmer supports buffered memory access with buffersize=128 bytes.
+
+Programmer supports the following devices:
+    Device code: 0x44
+
+avrdude.exe: AVR device initialized and ready to accept instructions
+
+Reading | ################################################## | 100% 0.00s
+
+avrdude.exe: Device signature = 0x1e9587 (probably m32u4)
+avrdude.exe: NOTE: "flash" memory has been specified, an erase cycle will be performed
+             To disable this feature, specify the -D option.
+avrdude.exe: erasing chip
+avrdude.exe: reading input file "./.build/lets_split_rev2_xyverz.hex"
+avrdude.exe: input file ./.build/lets_split_rev2_xyverz.hex auto detected as Intel Hex
+avrdude.exe: writing flash (27938 bytes):
+
+Writing | ################################################## | 100% 2.40s
+
+avrdude.exe: 27938 bytes of flash written
+avrdude.exe: verifying flash memory against ./.build/lets_split_rev2_xyverz.hex:
+avrdude.exe: load data flash data from input file ./.build/lets_split_rev2_xyverz.hex:
+avrdude.exe: input file ./.build/lets_split_rev2_xyverz.hex auto detected as Intel Hex
+avrdude.exe: input file ./.build/lets_split_rev2_xyverz.hex contains 27938 bytes
+avrdude.exe: reading on-chip flash data:
+
+Reading | ################################################## | 100% 0.43s
+
+avrdude.exe: verifying ...
+avrdude.exe: 27938 bytes of flash verified
+
+avrdude.exe: safemode: Fuses OK (E:CB, H:D8, L:FF)
+
+avrdude.exe done.  Thank you.
+```
+如果您对此有任何问题，您可能需要这样做：
+
+    sudo make <my_keyboard>:<my_keymap>:avrdude
+
+
+此外，如果要刷新多个板，请使用以下命令：
+
+    make <keyboard>:<keymap>:avrdude-loop
+
+当你完成了刷新后，你需要按下ctrl+c或者其他正确的按键来让你的操作系统终止循环。
+
+
+## HalfKay
+
+对于PJRC设备（Teensy），当您准备好编译和刷新固件时，打开终端窗口并运行构建命令: 
+
+    make <my_keyboard>:<my_keymap>:teensy
+
+比如, 如果你的布局叫做"xyverz"你想创建Ergodox or Ergodox EZ的布局,你要使用以下命令:
+
+    make erdogox_ez:xyverz:teensy
+
+固件完成编译后，它将输出如下内容：
+
+```
+Linking: .build/ergodox_ez_xyverz.elf                                                               [OK]
+Creating load file for flashing: .build/ergodox_ez_xyverz.hex                                       [OK]
+Checking file size of ergodox_ez_xyverz.hex                                                         [OK]
+ * File size is fine - 25584/32256
+ Teensy Loader, Command Line, Version 2.1
+Read "./.build/ergodox_ez_xyverz.hex": 25584 bytes, 79.3% usage
+Waiting for Teensy device...
+ (hint: press the reset button)
+ ```
+
+此时，复位键盘。完成后，您将看到如下输出：
+
+ ```
+ Found HalfKay Bootloader
+Read "./.build/ergodox_ez_xyverz.hex": 28532 bytes, 88.5% usage
+Programming............................................................................................................................................................................
+...................................................
+Booting
+```
+
+## STM32 (ARM)
+
+对于大多数ARM板（包括Proton C、Planck Rev 6和Preonic Rev 3），当您准备好编译和刷新固件时，打开终端窗口并运行构建命令：
+
+    make <my_keyboard>:<my_keymap>:dfu-util
+
+例如，如果您的keymap被命名为“xyverz”，并且您正在为Planck Revision 6键盘构建一个布局，那么您需要使用以下命令，然后将键盘重新启动到bootloader（在完成编译之前）：
+
+    make planck/rev6:xyverz:dfu-util
+
+固件完成编译后，它将输出如下内容：
+
+```
+Linking: .build/planck_rev6_xyverz.elf                                                             [OK]
+Creating binary load file for flashing: .build/planck_rev6_xyverz.bin                               [OK]
+Creating load file for flashing: .build/planck_rev6_xyverz.hex                                     [OK]
+
+Size after:
+   text    data     bss     dec     hex filename
+      0   41820       0   41820    a35c .build/planck_rev6_xyverz.hex
+
+Copying planck_rev6_xyverz.bin to qmk_firmware folder                                              [OK]
+dfu-util 0.9
+
+Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
+Copyright 2010-2016 Tormod Volden and Stefan Schmidt
+This program is Free Software and has ABSOLUTELY NO WARRANTY
+Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
+
+Invalid DFU suffix signature
+A valid DFU suffix will be required in a future dfu-util release!!!
+Opening DFU capable USB device...
+ID 0483:df11
+Run-time device DFU version 011a
+Claiming USB DFU Interface...
+Setting Alternate Setting #0 ...
+Determining device status: state = dfuERROR, status = 10
+dfuERROR, clearing status
+Determining device status: state = dfuIDLE, status = 0
+dfuIDLE, continuing
+DFU mode device DFU version 011a
+Device returned transfer size 2048
+DfuSe interface name: "Internal Flash  "
+Downloading to address = 0x08000000, size = 41824
+Download        [=========================] 100%        41824 bytes
+Download done.
+File downloaded successfully
+Transitioning to dfuMANIFEST state
+```
+
+## 试一试吧!
+
+恭喜您! 您的自定义固件已经刷写到您的键盘
+
+试一试，确保一切按你想的方式进行。我们写了[测试和调试](newbs_testing_debugging.md)来完善新手引导。 因此，请前往那里了解如何排除自定义功能的故障。

docs/zh-cn/newbs_getting_started.md

@@ -0,0 +1,102 @@
+# 介绍
+
+你的电脑键盘里面包含一个处理器, 这个处理器和你电脑里面的不太一样。这个处理器负责运行一些特殊的软件，这些软件可以监测按钮按下并将按钮处于按下还是释放状态的数据发送出去。QMK就是这样一种软件，即监测按钮被按下并发送这样的信息到作为主机的计算机上。当你创建了你的布局, 你也就创建了你的键盘运行的的可执行程序。
+
+QMK试图通过使简单的事情变得更简单，使使不可能成为可能来把大量的权力交给你。你不需要懂如何通过程序创建强大的布局——你只需要遵循简单的语法规则。
+
+# 新手上路
+
+在你能创建布局前,你要安装一些软件来建立你的开发环境。无论你想编译多少固件，这个操作都只需要进行一次。
+
+如果您更喜欢图形化界面, 请考虑使用在线工具[QMK配置器](https://config.qmk.fm)。 请参考 [使用在线GUI构建您的第一个固件](newbs_building_firmware_configurator.md)。
+
+
+## 下载软件
+
+### 文本编辑器
+
+你需要一个可以编辑 **纯文本** 文件的程序。在Windows上你可以用Notepad, 在Linux上使用gedit，这两个都是简单又实用的文本编辑工具。 在macOS上, 请小心使用 “文本编辑” 这个默认软件: 如果你不明确的选择_格式_菜单中的 _制作纯文本_ 的话文本将不会被保存为纯文本。
+
+你也可以下载并安装一个专用编辑器 [Sublime Text](https://www.sublimetext.com/) 或 [VS Code](https://code.visualstudio.com/)。 这大概是跨平台的最好方法了, 这些编辑器是专门为了编辑代码设计的。
+
+?>搞不清用哪种编辑器? Laurence Bradford 写了篇关于编辑器选择的文章 [a great introduction](https://learntocodewith.me/programming/basics/text-editors/)。
+
+### QMK 工具箱
+
+QMK 工具箱 是一种可选的Windows和macOS下的图形化工具，它可以对你的定制键盘进行编程和调试。你可能会发现它就是你能简单的刷新你的键盘固件并查看调试信息的稀世珍宝。
+
+[在这里下载最新发布版本](https://github.com/qmk/qmk_toolbox/releases/latest)
+
+* Windows用户: `qmk_toolbox.exe` (绿色版) 或 `qmk_toolbox_install.exe` (安装版)
+* macOS用户: `QMK.Toolbox.app.zip` (绿色版) or `QMK.Toolbox.pkg` (安装版)
+
+## 建立你的环境
+
+我们为了使QMK环境变得更容易建立已竭尽所能。你只需要准备Linux 或 Unix 环境, 然后让QMK安装剩余部分。
+
+?> 如果你从未使用过Linux/Unix的命令行,有一些你需要学习的基础概念和命令，以下资料将教会您使用QMK环境的必要能力:<br>
+[必会Linux命令](https://www.guru99.com/must-know-linux-commands.html)<br>
+[一些基本的Unix命令](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
+
+### Windows
+
+你需要安装MSYS2和Git.
+
+* 按照以下安装说明进行操作[MSYS2 主页](http://www.msys2.org)。
+* 关闭所有打开的MSYS2终端并打开新的MSYS2 MinGW 64-bit终端。
+* 使用以下命令安装Git: `pacman -S git`。
+
+### macOS
+
+你需要安装Homebrew。按照以下说明进行操作 [Homebrew 主页](https://brew.sh)。
+
+在Homebrew安装完成后, 继续 _同步QMK工程_. 这一步你将会通过运行一个脚本安装其他包。
+
+### Linux
+
+你将需要安装Git.你很有可能已经安装,但若你尚未安装,可以使用以下命令进行安装:
+
+* Debian / Ubuntu / Devuan: `apt-get install git`
+* Fedora / Red Hat / CentOS: `yum install git`
+* Arch: `pacman -S git`
+
+?> 无论你使用哪种平台，Docker都可以是你的选择[点这里进一步了解](getting_started_build_tools.md#docker)
+
+## 同步QMK工程
+
+当你建立Linux/Unix环境后,你就已经可以下载QMK了.下载时我们可以用Git来 "clone" QMK仓库. 打开一个终端或MSYS2 MinGW 窗口，在阅读剩余的指南时请保持窗口打开。在窗口里面运行以下两句命令:
+
+```shell
+git clone --recurse-submodules https://github.com/qmk/qmk_firmware.git
+cd qmk_firmware
+```
+
+?> 如果您已经知道[如何使用GitHub](getting_started_github.md), 我们推荐您创建您自己的分支并克隆。 如果您不知道这是什么, 您完全可以忽略这句无关紧要的话。
+
+QMK附带一个脚本，可帮助您设置剩余的所需内容.您可以通过输入此命令来运行它:
+
+    util/qmk_install.sh
+
+## 测试你的开发环境
+
+现在你的QMK环境已经建立完毕, 你可以为你的键盘创建固件了。开始试着创建键盘的默认固件吧。 你需要使用以下格式的命令创建固件:
+
+    make <keyboard>:default
+
+比如, 制作一个Clueboard 66%的固件，需要用:
+
+    make clueboard/66/rev3:default
+
+当完成后你要看到一些回显，尾部如下:
+
+```
+Linking: .build/clueboard_66_rev3_default.elf                                                       [OK]
+Creating load file for flashing: .build/clueboard_66_rev3_default.hex                               [OK]
+Copying clueboard_66_rev3_default.hex to qmk_firmware folder                                        [OK]
+Checking file size of clueboard_66_rev3_default.hex                                                 [OK]
+ * The firmware size is fine - 26356/28672 (2316 bytes free)
+```
+
+# 创建你的布局
+
+现在你可以创建属于你自己的布局了! 请移步 [构建你的第一个固件](newbs_building_firmware.md)来继续。

docs/zh-cn/newbs_learn_more_resources.md

@@ -0,0 +1,15 @@
+# 学习资源
+
+这些资源旨在让QMK社区的新成员更了解新成员文档中提供的信息。
+
+Git 资源:
+
+* [很好的通用教程](https://www.codecademy.com/learn/learn-git)
+* [从例子中学习Git游戏](https://learngitbranching.js.org/)
+* [了解有关GitHub的更多信息的Git资源](getting_started_github.md)
+* [专门针对QMK的Git资源](contributing.md)
+
+
+命令行资源:
+
+* [超棒的命令行通用教程](https://www.codecademy.com/learn/learn-the-command-line)

docs/zh-cn/newbs_testing_debugging.md

@@ -0,0 +1,43 @@
+# 测试和调试
+
+使用自定义固件刷新键盘后，您就可以测试它了。如果您幸运，一切都会完美运行，但如果没有，这份文件将帮助您找出问题所在。
+
+## 测试
+
+测试键盘通常非常简单。按下每一个键并确保它发送的是您期望的键。甚至有一些程序可以帮助您确保没有任何键失效。
+
+注意：这些程序不是由QMK提供或认可的。
+
+* [Switch Hitter](https://elitekeyboards.com/switchhitter.php) (仅Windows)
+* [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (仅Mac)
+* [Keyboard Tester](http://www.keyboardtester.com) (网页版)
+* [Keyboard Checker](http://keyboardchecker.com) (网页版)
+
+## 使用QMK工具箱进行调试
+
+[QMK工具箱](https://github.com/qmk/qmk_toolbox) 将会在你的`rules.mk`中有`CONSOLE_ENABLE = yes`的时候显示你键盘发来的消息。 默认情况下，输出极为有限，不过您可以打开调试模式来增加输出信息量。使用你键盘布局中的`DEBUG`键码,使用 [命令](feature_command.md) 特性来使能调试模式, 或者向你的布局中添加以下代码。
+
+```c
+void keyboard_post_init_user(void) {
+  // Customise these values to desired behaviour
+  debug_enable=true;
+  debug_matrix=true;
+  //debug_keyboard=true;
+  //debug_mouse=true;
+}
+```
+
+<!-- 需要修改之处:这里要添加调试回显。 -->
+
+## 发送您自己的调试消息
+
+有时用[custom code](custom_quantum_functions.md)发送自定义调试信息很有用. 这么做很简单. 首先在你文件头部包含`print.h`:
+
+    #include <print.h>
+
+之后，您可以使用一些不同的打印功能:
+
+* `print("string")`: 打印简单字符串.
+* `uprintf("%s string", var)`: 打印格式化字符串
+* `dprint("string")`: 仅在调试模式使能时打印简单字符串
+* `dprintf("%s string", var)`: 仅在调试模式使能时打印格式化字符串

drivers/issi/is31fl3733.c

@@ -75,10 +75,10 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required = false;
+bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false };
 
 uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
+bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
 
 void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
 {
@@ -123,12 +123,13 @@ void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
     }
 }
 
-void IS31FL3733_init( uint8_t addr )
+void IS31FL3733_init( uint8_t addr, uint8_t sync)
 {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, shutdown is enabled last.
     // Set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
+    // Sync is passed so set it according to the datasheet.
 
     // Unlock the command register.
     IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
@@ -161,7 +162,7 @@ void IS31FL3733_init( uint8_t addr )
     // Set global current to maximum.
     IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
     // Disable software shutdown.
-    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01 );
 
     // Wait 10ms to ensure the device has woken up.
     #ifdef __AVR__
@@ -179,7 +180,7 @@ void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
         g_pwm_buffer[led.driver][led.r] = red;
         g_pwm_buffer[led.driver][led.g] = green;
         g_pwm_buffer[led.driver][led.b] = blue;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required[led.driver] = true;
     }
 }
 
@@ -218,35 +219,34 @@ void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, b
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
-    g_led_control_registers_update_required = true;
+    g_led_control_registers_update_required[led.driver] = true;
 
 }
 
-void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index )
 {
-    if ( g_pwm_buffer_update_required )
+    if ( g_pwm_buffer_update_required[index] )
     {
         // Firstly we need to unlock the command register and select PG1
-        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
 
-        IS31FL3733_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        //IS31FL3733_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+        IS31FL3733_write_pwm_buffer( addr, g_pwm_buffer[index] );
     }
-    g_pwm_buffer_update_required = false;
+    g_pwm_buffer_update_required[index] = false;
 }
 
-void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index )
 {
-    if ( g_led_control_registers_update_required )
+    if ( g_led_control_registers_update_required[index] )
     {
         // Firstly we need to unlock the command register and select PG0
-        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
         for ( int i=0; i<24; i++ )
         {
-            IS31FL3733_write_register(addr1, i, g_led_control_registers[0][i] );
-            //IS31FL3733_write_register(addr2, i, g_led_control_registers[1][i] );
+            IS31FL3733_write_register(addr, i, g_led_control_registers[index][i] );
         }
     }
+    g_led_control_registers_update_required[index] = false;
 }

drivers/issi/is31fl3733.h

@@ -32,7 +32,7 @@ typedef struct is31_led {
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3733_init( uint8_t addr );
+void IS31FL3733_init( uint8_t addr, uint8_t sync );
 void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data );
 void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
 
@@ -45,8 +45,8 @@ void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, b
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index );
+void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index );
 
 #define A_1  0x00
 #define A_2  0x01

keyboards/40percentclub/nein/config.h

@@ -0,0 +1,239 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x9999
+#define MANUFACTURER    di0ib
+#define PRODUCT         The nein Keyboard
+#define DESCRIPTION     9 key macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* Keyboard Matrix Assignments */
+#define DIRECT_PINS { \
+    { F4, F5, F6 }, \
+    { F7, B1, B3 }, \
+    { B2, B6, B5 }  \
+}
+#define UNUSED_PINS
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/nein/info.json

@@ -0,0 +1,22 @@
+{
+  "keyboard_name": "nein",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 3,
+  "height": 3,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"x":0, "y":0},
+        {"x":1, "y":0},
+        {"x":2, "y":0},
+        {"x":0, "y":1},
+        {"x":1, "y":1},
+        {"x":2, "y":1},
+        {"x":0, "y":2},
+        {"x":1, "y":2},
+        {"x":2, "y":2}
+      ]
+    }
+  }
+}

keyboards/40percentclub/nein/keymaps/default/keymap.c

@@ -0,0 +1,29 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_3x3(
+        KC_MUTE, KC_HOME, KC_MPLY, \
+        MO(1),   KC_UP,   KC_END, \
+        KC_LEFT, KC_DOWN, KC_RGHT \
+    ),
+    [1] = LAYOUT_ortho_3x3(
+        RESET,   _______, KC_STOP, \
+        _______, _______, RGB_MOD, \
+        KC_MPRV, _______, KC_MNXT \
+    ),
+};

keyboards/40percentclub/nein/nein.c

@@ -0,0 +1,16 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "nein.h"

keyboards/40percentclub/nein/nein.h

@@ -0,0 +1,37 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_3x3( \
+    k00, k01, k02, \
+    k10, k11, k12, \
+    k20, k21, k22  \
+) \
+{ \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 }, \
+    { k20, k21, k22 }  \
+}

keyboards/40percentclub/nein/readme.md

@@ -0,0 +1,18 @@
+# nein
+
+![nein](https://2.bp.blogspot.com/-avYV4grcAPQ/XL9a67SxgKI/AAAAAAACVCE/GSGVYRThaEEDd14M3LG34gQTv5ZabRI0QCEwYBhgL/s640/a.jpg)
+===
+
+A 9 key macropad.
+
+Powered by a Pro Micro and can fit any of the various different sized variations of Pro Micro.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: nein PCB  
+Hardware Availability: [nein project on 40% Keyboards](https://www.40percent.club/2019/04/nein.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 40percentclub/nein:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/nein/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 	    # Enable support for HD44780 based LCDs (+400)

keyboards/ai03/lunar/info.json

@@ -7,7 +7,78 @@
     "height": 5, 
     "layouts": {
         "LAYOUT": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":2.25}, {"x":6.5, "y":4, "w":1.5}, {"x":8, "y":4, "w":2.75}, {"label":"Alt", "x":10.75, "y":4, "w":1.25}, {"label":"Win", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"BackspaceL", "x":13, "y":0},
+                {"label":"BackspaceR", "x":14, "y":0},
+                {"label":"Insert", "x":15, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Delete", "x":15, "y":1},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Home", "x":15, "y":2},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"\u2191", "x":14, "y":3},
+                {"label":"End", "x":15, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+                {"label":"Win", "x":1.5, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.75, "y":4, "w":1.5},
+                {"x":4.25, "y":4, "w":2.25},
+                {"x":6.5, "y":4, "w":1.5},
+                {"x":8, "y":4, "w":2.75},
+                {"label":"Alt", "x":10.75, "y":4, "w":1.25},
+                {"label":"Win", "x":12, "y":4},
+                {"label":"\u2190", "x":13, "y":4},
+                {"label":"\u2193", "x":14, "y":4},
+                {"label":"\u2192", "x":15, "y":4}
+            ]
         }
     }
 }

keyboards/ai03/orbit/info.json

@@ -0,0 +1,88 @@
+{
+    "keyboard_name": "orbit", 
+    "url": "https://github.com/ai03-2725/Orbit", 
+    "maintainer": "ai03", 
+    "width": 16, 
+    "height": 6, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0,  "y":0.63},
+                {"x":1,  "y":0.38},
+                {"x":2,  "y":0.38},
+                {"x":3,  "y":0.13},
+                {"x":4,  "y":0},
+                {"x":5,  "y":0.13},
+                {"x":6,  "y":0.25},
+                {"x":9,  "y":0.25},
+                {"x":10, "y":0.13},
+                {"x":11, "y":0},
+                {"x":12, "y":0.13},
+                {"x":13, "y":0.38},
+                {"x":14, "y":0.38},
+                {"x":15, "y":0.63},
+
+                {"x":0,  "y":1.63},
+                {"x":1,  "y":1.38},
+                {"x":2,  "y":1.38},
+                {"x":3,  "y":1.13},
+                {"x":4,  "y":1},
+                {"x":5,  "y":1.13},
+                {"x":6,  "y":1.25},
+                {"x":9,  "y":1.25},
+                {"x":10, "y":1.13},
+                {"x":11, "y":1},
+                {"x":12, "y":1.13},
+                {"x":13, "y":1.38},
+                {"x":14, "y":1.38},
+                {"x":15, "y":1.63},
+
+                {"x":0,  "y":2.63},
+                {"x":1,  "y":2.38},
+                {"x":2,  "y":2.38},
+                {"x":3,  "y":2.13},
+                {"x":4,  "y":2},
+                {"x":5,  "y":2.13},
+                {"x":6,  "y":2.25},
+                {"x":9,  "y":2.25},
+                {"x":10, "y":2.13},
+                {"x":11, "y":2},
+                {"x":12, "y":2.13},
+                {"x":13, "y":2.38},
+                {"x":14, "y":2.38},
+                {"x":15, "y":2.63},
+
+                {"x":0,  "y":3.63},
+                {"x":1,  "y":3.38},
+                {"x":2,  "y":3.38},
+                {"x":3,  "y":3.13},
+                {"x":4,  "y":3},
+                {"x":5,  "y":3.13},
+                {"x":6,  "y":3.25},
+                {"x":9,  "y":3.25},
+                {"x":10, "y":3.13},
+                {"x":11, "y":3},
+                {"x":12, "y":3.13},
+                {"x":13, "y":3.38},
+                {"x":14, "y":3.38},
+                {"x":15, "y":3.63},
+
+                {"x":1,  "y":4.38},
+                {"x":2,  "y":4.38},
+                {"x":3,  "y":4.13},
+                {"x":4,  "y":4},
+
+                {"x":5.5, "y":4.25},
+                {"x":6.5, "y":4.5, "h":1.5},
+
+                {"x":8.5, "y":4.5, "h":1.5},
+                {"x":9.5, "y":4.25},
+
+                {"x":11, "y":4},
+                {"x":12, "y":4.13},
+                {"x":13, "y":4.38},
+                {"x":14, "y":4.38}
+            ]
+        }
+    }
+}

keyboards/boardwalk/keymaps/brendanwr/config.h

@@ -0,0 +1,16 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once

keyboards/boardwalk/keymaps/brendanwr/keymap.c

@@ -0,0 +1,95 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer {
+  _BASE,
+  _FN,
+  _BACKLIT
+};
+
+
+#define FN MO(_FN)
+#define BACKLIT MO(_BACKLIT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* BASE
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | +      | \      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | LCTRL  | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      | ENTER  | HOME   |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | RSHIFT | FN     | END    |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * |        | LALT  | LGUI       |                             SPACE                            | RGUI        | RALT    |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_BASE] = LAYOUT_ortho_7u(
+  KC_ESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,   KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,   KC_BSLS,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,   KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC,  KC_BSPC,
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,   KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,   KC_HOME,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,   KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  FN,       KC_END,
+           KC_LALT, KC_LGUI,                                KC_SPC,                                 KC_RGUI, KC_RALT          
+ ),
+
+/* FUNCTION
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | `      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * |        |        |        |        |        |        |        |        |        |        | UP     |        |        | DEL    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * |        | VOLD   | VOLU   | MUTE   |        |        |        |        |        |        | LEFT   | RIGHT  |        | PG_UP  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * |        |        |        |        |        |        |        |        |        |        | DOWN   |        |        | PG_DN  |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * |        |       |            |                                                              |             |         |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_FN] = LAYOUT_ortho_7u(
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,   KC_F11,  KC_F12,  KC_GRV,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, KC_DEL,
+  _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, KC_PGUP,
+  BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, KC_PGDN,
+          _______,  _______,                                  _______,                               _______, _______       
+ ),
+
+/* BACKLIT 
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * |        | RGBTOG | RGBMOD | RGBHUI | RGBHUD | RGBSAI | RGBSAD | RGBVAI | RGBVAD |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * |        |       |            |                                                              |             |         |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_BACKLIT] = LAYOUT_ortho_7u(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+          _______,  _______,                                  _______,                               _______, _______       
+ )
+};

keyboards/boston_meetup/2019/2019.c

@@ -19,20 +19,18 @@
 #include "haptic.h"
 
 #ifdef RGB_MATRIX_ENABLE
-#include "rgblight.h"
+#include "rgb_matrix.h"
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-  /*{row | col << 4}
-    |             {x=0..224, y=0..64}
-    |              |         modifier
-    |              |         | */
-  {{1|(3<<4)},    {188, 16}, 4},
-  {{3|(3<<4)},    {187, 48}, 4},
-  {{4|(2<<4)},    {149, 64}, 4},
-  {{4|(1<<4)},    {112, 64}, 4},
-  {{3|(0<<4)},    {37,  48}, 4},
-  {{1|(0<<4)},    {38, 16}, 4}
-};
+led_config_t g_led_config = { {
+  {   5, NO_LED, NO_LED,   0 },
+  { NO_LED, NO_LED, NO_LED, NO_LED },
+  {   4, NO_LED, NO_LED,   1 },
+  {   3, NO_LED, NO_LED,   2 }
+}, {
+    { 188,  16 }, { 187,  48 }, { 149,  64 }, { 112,  64 }, {  37,  48 }, {  38,  16 }
+}, {
+    4, 4, 4, 4, 4, 4
+} };
 #endif
 
 uint8_t *o_fb;
@@ -48,12 +46,12 @@ uint16_t counterst = 0;
 #define ScreenOffInterval 60000 /* milliseconds */
 static uint16_t last_flush;
 
-volatile uint8_t led_numlock = false; 
-volatile uint8_t  led_capslock = false; 
+volatile uint8_t led_numlock = false;
+volatile uint8_t  led_capslock = false;
 volatile uint8_t  led_scrolllock = false;
 
 static uint8_t layer;
-static bool queue_for_send = false; 
+static bool queue_for_send = false;
 static uint8_t encoder_value = 32;
 
 __attribute__ ((weak))
@@ -64,13 +62,13 @@ void draw_ui(void) {
 
 /* Boston MK title is 55 x 10 pixels */
 #define NAME_X 0
-#define NAME_Y 0 
+#define NAME_Y 0
 
   draw_string(NAME_X + 1, NAME_Y + 2, "BOSTON MK", PIXEL_ON, NORM, 0);
 
 /* Layer indicator is 41 x 10 pixels */
 #define LAYER_INDICATOR_X 60
-#define LAYER_INDICATOR_Y 0 
+#define LAYER_INDICATOR_Y 0
 
   draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0);
   draw_rect_filled_soft(LAYER_INDICATOR_X + 32, LAYER_INDICATOR_Y + 1, 9, 9, PIXEL_ON, NORM);
@@ -88,7 +86,7 @@ void draw_ui(void) {
       draw_pixel(MATRIX_DISPLAY_X + y + y + 3, MATRIX_DISPLAY_Y + x + x + 3,(matrix_get_row(x) & (1 << y)) > 0, NORM);
 
     }
-  } 
+  }
   draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 12, 12, PIXEL_ON, NORM);
   /* hadron oled location on thumbnail */
   draw_rect_filled_soft(MATRIX_DISPLAY_X + 5, MATRIX_DISPLAY_Y + 2, 6, 2, PIXEL_ON, NORM);
@@ -195,7 +193,7 @@ void matrix_init_kb(void) {
   queue_for_send = true;
 	matrix_init_user();
 }
-            
+
 void matrix_scan_kb(void) {
 if (queue_for_send) {
 #ifdef QWIIC_MICRO_OLED_ENABLE

keyboards/butterstick/keymaps/default/keymap.c

@@ -45,6 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 uint32_t processQwerty(bool lookup) {
     // SECRET AGENT CHORDS
     P( LSU | LK | RS | RD,    	SEND_STRING(VERSION); SEND_STRING(__DATE__));
+	P( LR  | ST2| RR | RB, 		SEND(KC_BSPC));
     P( LSD | RZ,   			 	SEND(KC_SPC));
 
     // Dual chords

keyboards/candybar/rules.mk

@@ -31,6 +31,7 @@ OPT_DEFS =
 
 # Options to pass to dfu-util when flashing
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.c

@@ -0,0 +1,56 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+// Value to place in RTC backup register 10 for persistent bootloader mode
+#define RTC_BOOTLOADER_FLAG 0x424C
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+   //JTAG-DP Disabled and SW-DP Enabled
+   AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
+   //Set backup register DR10 to enter bootloader on reset
+   BKP->DR10 = RTC_BOOTLOADER_FLAG;
+}

keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.h

@@ -0,0 +1,166 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME              "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOA_LED               8
+#define GPIOD_OSC_IN            0
+#define GPIOD_OSC_OUT           1
+
+/* In case your board has a "USB enable" hardware
+   controlled by a pin, define it here. (It could be just
+   a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC          10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA9  - Alternate output  (USART1 TX).
+ * PA10 - Normal input      (USART1 RX).
+ */
+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10    - Push Pull output  (USB switch).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13    - Push Pull output  (LED).
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+   have a 1.5k resistor connected on one end to the D+ line
+   and on the other end to some pin. Or even a slightly more
+   complicated "USB enable" circuit, controlled by a pin.
+   That should go here.
+
+   However on some boards (e.g. one that I have), there's no
+   such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */

keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103

keyboards/cannonkeys/practice65/bootloader_defs.h

@@ -0,0 +1,10 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+
+// STM32F103* does NOT have an USB bootloader in ROM (only serial),
+//  so setting anything here does not make much sense
+#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/practice65/chconf.h

@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -58,7 +58,7 @@
  *          The value one is not valid, timeouts are rounded up to
  *          this value.
  */
-#define CH_CFG_ST_TIMEDELTA                 2
+#define CH_CFG_ST_TIMEDELTA                 0
 
 /** @} */
 
@@ -105,6 +105,10 @@
  */
 #define CH_CFG_NO_IDLE_THREAD               FALSE
 
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
 /** @} */
 
 /*===========================================================================*/
@@ -140,7 +144,7 @@
  *
  * @note    The default is @p TRUE.
  */
-#define CH_CFG_USE_TM                       TRUE
+#define CH_CFG_USE_TM                       FALSE
 
 /**
  * @brief   Threads registry APIs.
@@ -214,7 +218,7 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_CONDVARS.
  */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
 
 /**
  * @brief   Events Flags APIs.
@@ -252,7 +256,7 @@
  *          requirements.
  * @note    Requires @p CH_CFG_USE_MESSAGES.
  */
-#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
 
 /**
  * @brief   Mailboxes APIs.
@@ -292,7 +296,7 @@
  *
  * @note    The default is @p TRUE.
  */
-#define CH_CFG_USE_MEMPOOLS                 TRUE
+#define CH_CFG_USE_MEMPOOLS                 FALSE
 
 /**
  * @brief   Dynamic Threads APIs.
@@ -303,7 +307,7 @@
  * @note    Requires @p CH_CFG_USE_WAITEXIT.
  * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
  */
-#define CH_CFG_USE_DYNAMIC                  TRUE
+#define CH_CFG_USE_DYNAMIC                  FALSE
 
 /** @} */
 
@@ -374,7 +378,7 @@
  * @note    The default failure mode is to halt the system with the global
  *          @p panic_msg variable set to @p NULL.
  */
-#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
 
 /**
  * @brief   Debug option, stacks initialization.

keyboards/cannonkeys/practice65/config.h

@@ -1,6 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2015 Jun Wako <wakojun@gmail.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -16,57 +15,49 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef REV2_CONFIG_H
-#define REV2_CONFIG_H
-
-#include "config_common.h"
+#pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0100
-#define MANUFACTURER    Omkbd
-#define PRODUCT         ErgoDash
-#define DESCRIPTION     Power
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0x6565
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER CannonKeys
+#define PRODUCT Practice 65
+#define DESCRIPTION Practice 65
 
 /* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 7
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
 
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+#define MATRIX_COL_PINS { B8, B0, A0, B5, B10, B9, A6, B12, A7, A5, A4, A3, A2, A1, B13, B14 }
+#define MATRIX_ROW_PINS { B4, B11, B1, B7, B6 }
+#define DIODE_DIRECTION COL2ROW
 
-/* define tapping term */
-#define TAPPING_TERM 120
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
 
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
-#define C6_AUDIO
-
-/* number of backlight levels */
-#ifdef BACKLIGHT_ENABLE
-  #define BACKLIGHT_PIN B6
-  #define BACKLIGHT_LEVELS 7
-//  #define BACKLIGHT_BREATHING
-//  #define BREATHING_PERIOD 4
-#endif
-
 /* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
+#define DEBOUNCE    5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 20
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
 
-#define RGBLED_NUM 24    // Number of LEDs
 
 /*
  * Feature disable options
@@ -74,10 +65,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /* disable debug print */
-// #define NO_DEBUG
+//#define NO_DEBUG
 
 /* disable print */
-// #define NO_PRINT
+//#define NO_PRINT
 
 /* disable action features */
 //#define NO_ACTION_LAYER
@@ -85,5 +76,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-#endif

keyboards/cannonkeys/practice65/halconf.h

@@ -0,0 +1,353 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/cannonkeys/practice65/keymaps/default/keymap.c

@@ -0,0 +1,48 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_default(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,   KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC, KC_DEL, KC_INS,\
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, KC_DEL,\
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,         KC_PGUP,  \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH,           KC_RSFT, KC_UP, KC_PGDN, \
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                   KC_RALT, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT \
+  ),
+
+  [_FN1] = LAYOUT_default(
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, _______, _______,\
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
+    BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, \
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, \
+    KC_GRV,  _______, _______,                            _______,                            _______, _______, _______, _______, _______, RESET \
+  )
+};

keyboards/cannonkeys/practice65/ld/MKL26Z64.ld

@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+  flash0   : org = 0x00000000, len = 0x100
+  flash1   : org = 0x00000400, len = 0x10
+  flash2   : org = 0x00000410, len = 62k - 0x410
+  flash3   : org = 0x0000F800, len = 2k
+  flash4   : org = 0x00000000, len = 0
+  flash5   : org = 0x00000000, len = 0
+  flash6   : org = 0x00000000, len = 0
+  flash7   : org = 0x00000000, len = 0
+  ram0     : org = 0x1FFFF800, len = 8k
+  ram1     : org = 0x00000000, len = 0
+  ram2     : org = 0x00000000, len = 0
+  ram3     : org = 0x00000000, len = 0
+  ram4     : org = 0x00000000, len = 0
+  ram5     : org = 0x00000000, len = 0
+  ram6     : org = 0x00000000, len = 0
+  ram7     : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+  .cfmprotect : ALIGN(4) SUBALIGN(4)
+  {
+    KEEP(*(.cfmconfig))
+  } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__  = LENGTH(flash3);
+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/cannonkeys/practice65/ld/STM32F103x8_stm32duino_bootloader.ld

@@ -0,0 +1,88 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * 	#define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+    flash0  : org = 0x08002000, len = 64k - 0x2000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 20k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/cannonkeys/practice65/mcuconf.h

@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -14,11 +14,13 @@
     limitations under the License.
 */
 
-#ifndef MCUCONF_H
-#define MCUCONF_H
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
 
 /*
- * STM32F3xx drivers configuration.
+ * STM32F103 drivers configuration.
  * The following settings override the default settings present in
  * the various device driver implementation headers.
  * Note that the settings for each driver only have effect if the whole
@@ -31,71 +33,35 @@
  * 0...3        Lowest...Highest.
  */
 
-#define STM32F3xx_MCUCONF
-
 /*
  * HAL driver system settings.
  */
 #define STM32_NO_INIT                       FALSE
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
 #define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
 #define STM32_HSE_ENABLED                   TRUE
 #define STM32_LSE_ENABLED                   FALSE
 #define STM32_SW                            STM32_SW_PLL
 #define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
 #define STM32_PLLMUL_VALUE                  9
 #define STM32_HPRE                          STM32_HPRE_DIV1
 #define STM32_PPRE1                         STM32_PPRE1_DIV2
 #define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
-#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
-#define STM32_USART1SW                      STM32_USART1SW_PCLK
-#define STM32_USART2SW                      STM32_USART2SW_PCLK
-#define STM32_USART3SW                      STM32_USART3SW_PCLK
-#define STM32_UART4SW                       STM32_UART4SW_PCLK
-#define STM32_UART5SW                       STM32_UART5SW_PCLK
-#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
-#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
-#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
-#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
 #define STM32_USB_CLOCK_REQUIRED            TRUE
 #define STM32_USBPRE                        STM32_USBPRE_DIV1P5
-
-#undef STM32_HSE_BYPASS
-// #error "oh no"
-// #endif
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
 
 /*
  * ADC driver system settings.
  */
-#define STM32_ADC_DUAL_MODE                 FALSE
-#define STM32_ADC_COMPACT_SAMPLES           FALSE
 #define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_USE_ADC2                  FALSE
-#define STM32_ADC_USE_ADC3                  FALSE
-#define STM32_ADC_USE_ADC4                  FALSE
-#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
-#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
 #define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC2_DMA_PRIORITY         2
-#define STM32_ADC_ADC3_DMA_PRIORITY         2
-#define STM32_ADC_ADC4_DMA_PRIORITY         2
-#define STM32_ADC_ADC12_IRQ_PRIORITY        5
-#define STM32_ADC_ADC3_IRQ_PRIORITY         5
-#define STM32_ADC_ADC4_IRQ_PRIORITY         5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
-#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
 
 /*
  * CAN driver system settings.
@@ -103,17 +69,6 @@
 #define STM32_CAN_USE_CAN1                  FALSE
 #define STM32_CAN_CAN1_IRQ_PRIORITY         11
 
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE                 FALSE
-#define STM32_DAC_USE_DAC1_CH1              TRUE
-#define STM32_DAC_USE_DAC1_CH2              TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
-
 /*
  * EXT driver system settings.
  */
@@ -128,10 +83,6 @@
 #define STM32_EXT_EXTI17_IRQ_PRIORITY       6
 #define STM32_EXT_EXTI18_IRQ_PRIORITY       6
 #define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
 
 /*
  * GPT driver system settings.
@@ -140,28 +91,25 @@
 #define STM32_GPT_USE_TIM2                  FALSE
 #define STM32_GPT_USE_TIM3                  FALSE
 #define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM6                  TRUE
-#define STM32_GPT_USE_TIM7                  TRUE
-#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
 #define STM32_GPT_TIM1_IRQ_PRIORITY         7
 #define STM32_GPT_TIM2_IRQ_PRIORITY         7
 #define STM32_GPT_TIM3_IRQ_PRIORITY         7
 #define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM6_IRQ_PRIORITY         7
-#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
 #define STM32_GPT_TIM8_IRQ_PRIORITY         7
 
 /*
  * I2C driver system settings.
  */
-#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C1                  FALSE
 #define STM32_I2C_USE_I2C2                  FALSE
 #define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         10
-#define STM32_I2C_I2C2_IRQ_PRIORITY         10
-#define STM32_I2C_USE_DMA                   TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY         1
-#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
 #define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
 
 /*
@@ -171,28 +119,37 @@
 #define STM32_ICU_USE_TIM2                  FALSE
 #define STM32_ICU_USE_TIM3                  FALSE
 #define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
 #define STM32_ICU_USE_TIM8                  FALSE
 #define STM32_ICU_TIM1_IRQ_PRIORITY         7
 #define STM32_ICU_TIM2_IRQ_PRIORITY         7
 #define STM32_ICU_TIM3_IRQ_PRIORITY         7
 #define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
 #define STM32_ICU_TIM8_IRQ_PRIORITY         7
 
 /*
  * PWM driver system settings.
  */
 #define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM1                  TRUE
 #define STM32_PWM_USE_TIM2                  FALSE
 #define STM32_PWM_USE_TIM3                  FALSE
 #define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
 #define STM32_PWM_USE_TIM8                  FALSE
 #define STM32_PWM_TIM1_IRQ_PRIORITY         7
 #define STM32_PWM_TIM2_IRQ_PRIORITY         7
 #define STM32_PWM_TIM3_IRQ_PRIORITY         7
 #define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
 #define STM32_PWM_TIM8_IRQ_PRIORITY         7
 
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
 /*
  * SERIAL driver system settings.
  */
@@ -211,7 +168,7 @@
  * SPI driver system settings.
  */
 #define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
 #define STM32_SPI_USE_SPI3                  FALSE
 #define STM32_SPI_SPI1_DMA_PRIORITY         1
 #define STM32_SPI_SPI2_DMA_PRIORITY         1
@@ -249,9 +206,4 @@
 #define STM32_USB_USB1_HP_IRQ_PRIORITY      13
 #define STM32_USB_USB1_LP_IRQ_PRIORITY      14
 
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG                  FALSE
-
-#endif /* MCUCONF_H */
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/practice65/practice65.c

@@ -0,0 +1,2 @@
+
+#include "practice65.h"

keyboards/cannonkeys/practice65/practice65.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "quantum.h"
+
+#define KNO KC_NO
+
+#define LAYOUT_default( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D,      K2F, \
+  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,      K3F, \
+  K40, K41,  K42,               K46,           K49, K4A, K4B, K4C, K4D,      K4F \
+) { \
+  {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,    K0D,   K0E,    K0F }, \
+  {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,    K1D,   KC_NO ,  K1F }, \
+  {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  KC_NO,  K2D,   KC_NO,  K2F  }, \
+  {  K30,  KNO,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  K3C,    K3D,   KC_NO,  K3F  }, \
+  {  K40,  K41,  K42,  KNO,  KC_NO,  KC_NO,  K46,    KC_NO,  KC_NO,  K49,  K4A,  K4B,  K4C,    K4D,   KC_NO,  K4F  }  \
+}

keyboards/cannonkeys/practice65/readme.md

@@ -0,0 +1,12 @@
+# Practice 65
+
+A Blue Pill STM32F103C8T6-based 65% ANSI board.
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1)  
+Hardware Supported: Blue Pill STM32F103C8T6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/practice65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/practice65/rules.mk

@@ -0,0 +1,53 @@
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
+
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
+MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
+
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes

keyboards/claw44/ssd1306.c

@@ -13,7 +13,7 @@
 #include "sendchar.h"
 #include "timer.h"
 
-static const unsigned char font[] PROGMEM;
+extern const unsigned char font[] PROGMEM;
 
 // Set this to 1 to help diagnose early startup problems
 // when testing power-on with ble.  Turn it off otherwise,

keyboards/clueboard/60/rules.mk

@@ -35,6 +35,7 @@ OPT_DEFS =
 
 # Options to pass to dfu-util when flashing
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/clueboard/66/rev4/rules.mk

@@ -13,6 +13,7 @@ OPT_DEFS =
 
 # Options to pass to dfu-util when flashing
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/clueboard/66_hotswap/gen1/rules.mk

@@ -37,6 +37,7 @@ OPT_DEFS =
 
 # Options to pass to dfu-util when flashing
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # LED Configuration
 LED_MATRIX_ENABLE = IS31FL3731

keyboards/comet46/ssd1306.c

@@ -13,7 +13,7 @@
 #include "sendchar.h"
 #include "timer.h"
 
-static const unsigned char font[] PROGMEM;
+extern const unsigned char font[] PROGMEM;
 
 // Set this to 1 to help diagnose early startup problems
 // when testing power-on with ble.  Turn it off otherwise,

keyboards/converter/modelm101/keymaps/default/keymap.c

@@ -21,7 +21,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_GRV,  KC_1,    KC_2,   KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,   KC_INS,  KC_HOME, KC_PGUP,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
     KC_TAB,  KC_Q,    KC_W,   KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,   KC_DEL,  KC_END,  KC_PGDN,   KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
     KC_CAPS, KC_A,    KC_S,   KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,                                 KC_P4,   KC_P5,   KC_P6,
-    KC_LSFT, KC_NUBS, KC_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,            KC_UP,              KC_P1,   KC_P2,   KC_P3,   KC_LGUI,
+    KC_LSFT, KC_NUBS, KC_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,            KC_UP,              KC_P1,   KC_P2,   KC_P3,   KC_PENT,
     KC_LCTL,          KC_LALT,                           KC_SPC,                                      KC_RALT,          KC_RCTL,   KC_LEFT, KC_DOWN, KC_RGHT,   KC_P0,            KC_PDOT
   ),
 };

keyboards/crkbd/keymaps/drashna/config.h

@@ -27,7 +27,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 #define EE_HANDS
 
-// #define SSD1306OLED
+#undef USE_I2C
+#undef SSD1306OLED
 
 #define USE_SERIAL_PD2
 
@@ -35,17 +36,42 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define TAPPING_TERM 100
 
 #ifdef RGBLIGHT_ENABLE
-#undef RGBLED_NUM
-#define RGBLED_NUM 27
+#   undef RGBLED_NUM
+#   define RGBLED_NUM 27
 
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_LIMIT_VAL 100
+#   define RGBLIGHT_HUE_STEP 8
+#   define RGBLIGHT_SAT_STEP 8
+#   define RGBLIGHT_VAL_STEP 8
+#   define RGBLIGHT_LIMIT_VAL 100
 #endif
 
+#ifdef RGB_MATRIX_ENABLE
+#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+
+#   define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#   define DISABLE_RGB_MATRIX_CYCLE_ALL
+#   define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#   define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#   define DISABLE_RGB_MATRIX_DUAL_BEACON
+#   define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+#   define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+// #define DISABLE_RGB_MATRIX_RAINDROPS
+// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#   define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#   define DISABLE_RGB_MATRIX_SOLID_SPLASH
+#   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
 #ifdef AUDIO_ENABLE
-#define B6_AUDIO
+#   define B6_AUDIO
 // #define NO_MUSIC_MODE
 #endif
 

keyboards/crkbd/keymaps/drashna/keymap.c

@@ -1,15 +1,5 @@
 #include QMK_KEYBOARD_H
 #include "drashna.h"
-#ifdef PROTOCOL_LUFA
-  #include "lufa.h"
-  #include "split_util.h"
-#endif
-#ifdef SSD1306OLED
-  #include "ssd1306.h"
-#endif
-#ifdef OLED_DRIVER_ENABLE
-  #include "oled_driver.h"
-#endif
 
 extern keymap_config_t keymap_config;
 extern uint8_t is_master;
@@ -20,7 +10,7 @@ extern rgblight_config_t rgblight_config;
 #endif
 
 enum crkbd_keycodes {
-  RGBRST = NEW_SAFE_RANGE
+    RGBRST = NEW_SAFE_RANGE
 };
 
 #define LAYOUT_crkbd_base( \
@@ -31,7 +21,7 @@ enum crkbd_keycodes {
   LAYOUT_wrapper( \
     KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_MINS, \
     KC_TAB, ALT_T(K11),  K12, K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A, RGUI_T(KC_QUOT), \
-    OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29,  CTL_T(K2A), OS_RSFT, \
+    OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29, RCTL_T(K2A), OS_RSFT, \
                            LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,     KC_DEL,  KC_ENT,  RAISE                                        \
   )
 #define LAYOUT_crkbd_base_wrapper(...)       LAYOUT_crkbd_base(__VA_ARGS__)
@@ -115,35 +105,38 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 void matrix_init_keymap(void) {
-  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-  #ifdef SSD1306OLED
-    iota_gfx_init(!has_usb());   // turns on the display
-  #endif
-
-  #ifndef CONVERT_TO_PROTON_C
+#ifndef CONVERT_TO_PROTON_C
     setPinOutput(D5);
     writePinHigh(D5);
 
     setPinOutput(B0);
     writePinHigh(B0);
-  #endif
+#endif
 }
 
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
 
-// When add source files to SRC in rules.mk, you can use functions.
-const char *read_logo(void);
-char layer_state_str[24];
-char modifier_state_str[24];
-char host_led_state_str[24];
-char keylog_str[24] = {};
-char keylogs_str[21] = {};
-int keylogs_str_idx = 0;
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    if (is_master) {
+        return OLED_ROTATION_270;
+    } else {
+        return rotation;
+    }
+}
 
-// const char *read_mode_icon(bool swap);
-// void set_timelog(void);
-// const char *read_timelog(void);
+void render_crkbd_logo(void) {
+    static const char PROGMEM crkbd_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(crkbd_logo, false);
+}
+
+#define KEYLOG_LEN (int)(32 / OLED_FONT_WIDTH)
+char keylog_str[KEYLOG_LEN] = {};
+uint8_t keylogs_str_idx = 0;
+uint16_t log_timer = 0;
 
 const char code_to_name[60] = {
     ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
@@ -153,261 +146,124 @@ const char code_to_name[60] = {
     'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
     '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
 
-void set_keylog(uint16_t keycode, keyrecord_t *record) {
-  char name = ' ';
-  if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
-  if (keycode < 60) {
-    name = code_to_name[keycode];
-  }
-  // update keylog
-  snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
-           record->event.key.row, record->event.key.col,
-           keycode, name);
+void add_keylog(uint16_t keycode) {
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) ||
+        (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
 
-  // update keylogs
-  if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
-    keylogs_str_idx = 0;
-    for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
-      keylogs_str[i] = ' ';
+    for (uint8_t i = KEYLOG_LEN - 1; i > 0; i--) {
+        keylog_str[i] = keylog_str[i - 1];
     }
-  }
-
-  keylogs_str[keylogs_str_idx] = name;
-  keylogs_str_idx++;
+    if (keycode < 60) {
+        keylog_str[0] = code_to_name[keycode];
+    }
+    log_timer = timer_read();
 }
 
-const char *read_keylog(void) {
-  return keylog_str;
+void update_log(void) {
+    if (timer_elapsed(log_timer) > 750) {
+        add_keylog(0);
+    }
 }
 
-const char *read_keylogs(void) {
-  return keylogs_str;
-}
-
-
-const char* read_modifier_state(void) {
-  uint8_t modifiers = get_mods();
-  uint8_t one_shot = get_oneshot_mods();
-
-  snprintf(modifier_state_str, sizeof(modifier_state_str), "Mods:%s %s %s %s",
-    (modifiers & MOD_MASK_CTRL || one_shot & MOD_MASK_CTRL) ? "CTL" : "   ",
-    (modifiers & MOD_MASK_GUI || one_shot & MOD_MASK_GUI) ? "GUI" : "   ",
-    (modifiers & MOD_MASK_ALT || one_shot & MOD_MASK_ALT) ? "ALT" : "   ",
-    (modifiers & MOD_MASK_SHIFT || one_shot & MOD_MASK_SHIFT) ? "SFT" : "   "
-  );
-
-  return modifier_state_str;
-}
-
-const char *read_host_led_state(void) {
-  uint8_t leds = host_keyboard_leds();
-
-  snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s",
-    (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ",
-    (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ",
-    (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "
-  );
-
-  return host_led_state_str;
-}
-
-const char* read_layer_state(void) {
-  switch (biton32(layer_state)) {
-    case _RAISE:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise  ");
-      break;
-    case _LOWER:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower  ");
-      break;
-    case _ADJUST:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust ");
-      break;
-    default:
-      switch (biton32(default_layer_state)) {
-        case _QWERTY:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Qwerty ");
-          break;
-        case _COLEMAK:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Colemak");
-          break;
-        case _DVORAK:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Dvorak ");
-          break;
-        case _WORKMAN:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Workman");
-          break;
-      }
-      break;
-  }
-
-    return layer_state_str;
-}
-
-void matrix_scan_keymap(void) {
-   iota_gfx_task();
-}
-
-void matrix_render_user(struct CharacterMatrix *matrix) {
-  if (is_master) {
-    //If you want to change the display of OLED, you need to change here
-    matrix_write_ln(matrix, read_layer_state());
-    matrix_write_ln(matrix, read_modifier_state());
-    // matrix_write_ln(matrix, read_keylog());
-    matrix_write_ln(matrix, read_keylogs());
-    // matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
-    // matrix_write(matrix, read_host_led_state());
-    //matrix_write_ln(matrix, read_timelog());
-  } else {
-    matrix_write(matrix, read_logo());
-  }
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-  matrix_clear(&matrix);
-  matrix_render_user(&matrix);
-  matrix_update(&display, &matrix);
-}
 
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case KC_A ... KC_SLASH:
-    case KC_F1 ... KC_F12:
-    case KC_INSERT ... KC_UP:
-    case KC_KP_SLASH ... KC_KP_DOT:
-    case KC_F13 ... KC_F24:
-    if (record->event.pressed) { set_keylog(keycode, record); }
-      break;
-    // set_timelog();
-  }
-  return true;
+    if (record->event.pressed) {  add_keylog(keycode); }
+    return true;
 }
 
-#endif
-
-
-#ifdef OLED_DRIVER_ENABLE
-oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-  if (is_master) {
-    return OLED_ROTATION_270;
-  } else {
-    return rotation;
-  }
-}
-
-void render_crkbd_logo(void) {
-  static const char PROGMEM crkbd_logo[] = {
-      0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
-      0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
-      0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
-      0};
-  oled_write_P(crkbd_logo, false);
-}
-
-
 void render_status(void) {
 
-  oled_write_P(PSTR("Layer"), false);
-  switch (biton32(layer_state)) {
-    case 0:
-      oled_write_P(PSTR("Base "), false);
-      break;
-    case _RAISE:
-      oled_write_P(PSTR("Raise"), false);
-      break;
-    case _LOWER:
-      oled_write_P(PSTR("Lower"), false);
-      break;
-    case _ADJUST:
-      oled_write_P(PSTR("Adjst"), false);
-      break;
-    default:
-      oled_write_P(PSTR("Unkn "), false);
-      break;
-  }
-  oled_write_P(PSTR("Lyout"), false);
-  switch (biton32(default_layer_state)) {
-    case _QWERTY:
-      oled_write_P(PSTR("QWRTY"), false);
-      break;
-    case _COLEMAK:
-      oled_write_P(PSTR("COLMK"), false);
-      break;
-    case _DVORAK:
-      oled_write_P(PSTR("DVRAK"), false);
-      break;
-    case _WORKMAN:
-      oled_write_P(PSTR("WRKMN"), false);
-      break;
-    case _NORMAN:
-      oled_write_P(PSTR("NORMN"), false);
-      break;
-    case _MALTRON:
-      oled_write_P(PSTR("MLTRN"), false);
-      break;
-    case _EUCALYN:
-      oled_write_P(PSTR("ECLYN"), false);
-      break;
-    case _CARPLAX:
-      oled_write_P(PSTR("CRPLX"), false);
-      break;
-  }
+    oled_write_P(PSTR("Layer"), false);
+    switch (biton32(layer_state)) {
+        case 0:
+            oled_write_P(PSTR("Base "), false);
+            break;
+        case _RAISE:
+            oled_write_P(PSTR("Raise"), false);
+            break;
+        case _LOWER:
+            oled_write_P(PSTR("Lower"), false);
+            break;
+        case _ADJUST:
+            oled_write_P(PSTR("Adjst"), false);
+            break;
+        default:
+            oled_write_P(PSTR("Unkn "), false);
+            break;
+    }
+    oled_write_P(PSTR("Lyout"), false);
+    switch (biton32(default_layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR("QWRTY"), false);
+            break;
+        case _COLEMAK:
+            oled_write_P(PSTR("COLMK"), false);
+            break;
+        case _DVORAK:
+            oled_write_P(PSTR("DVRAK"), false);
+            break;
+        case _WORKMAN:
+            oled_write_P(PSTR("WRKMN"), false);
+            break;
+        case _NORMAN:
+            oled_write_P(PSTR("NORMN"), false);
+            break;
+        case _MALTRON:
+            oled_write_P(PSTR("MLTRN"), false);
+            break;
+        case _EUCALYN:
+            oled_write_P(PSTR("ECLYN"), false);
+            break;
+        case _CARPLAX:
+            oled_write_P(PSTR("CRPLX"), false);
+            break;
+    }
 
-  uint8_t modifiers = get_mods();
-  uint8_t one_shot = get_oneshot_mods();
+    uint8_t modifiers = get_mods();
+    uint8_t one_shot = get_oneshot_mods();
 
-  oled_write_P(PSTR("Mods:"), false);
-  oled_write_P( (modifiers & MOD_MASK_CTRL  || one_shot & MOD_MASK_CTRL ) ? PSTR(" CTL ") : PSTR("     "), false);
-  oled_write_P( (modifiers & MOD_MASK_GUI   || one_shot & MOD_MASK_GUI  ) ? PSTR(" GUI ") : PSTR("     "), false);
-  oled_write_P( (modifiers & MOD_MASK_ALT   || one_shot & MOD_MASK_ALT  ) ? PSTR(" ALT ") : PSTR("     "), false);
-  oled_write_P( (modifiers & MOD_MASK_SHIFT || one_shot & MOD_MASK_SHIFT) ? PSTR(" SFT ") : PSTR("     "), false);
+    oled_write_P(PSTR("Mods:"), false);
+    oled_write_P( (modifiers & MOD_MASK_SHIFT || one_shot & MOD_MASK_SHIFT) ? PSTR(" SFT ") : PSTR("     "), false);
+    oled_write_P( (modifiers & MOD_MASK_CTRL  || one_shot & MOD_MASK_CTRL ) ? PSTR(" CTL ") : PSTR("     "), false);
+    oled_write_P( (modifiers & MOD_MASK_ALT   || one_shot & MOD_MASK_ALT  ) ? PSTR(" ALT ") : PSTR("     "), false);
+    oled_write_P( (modifiers & MOD_MASK_GUI   || one_shot & MOD_MASK_GUI  ) ? PSTR(" GUI ") : PSTR("     "), false);
 
 
-  oled_write_P(PSTR("BTMGK"), false);
-  static const char PROGMEM mode_logo[4][4] = {
-    {0x95,0x96,0x0a,0},
-    {0xb5,0xb6,0x0a,0},
-    {0x97,0x98,0x0a,0},
-    {0xb7,0xb8,0x0a,0} };
+    oled_write_P(PSTR("BTMGK"), false);
 
-  if (keymap_config.swap_lalt_lgui != false) {
-    oled_write_P(mode_logo[0], false);
-    oled_write_P(mode_logo[1], false);
-  } else {
-    oled_write_P(mode_logo[2], false);
-    oled_write_P(mode_logo[3], false);
-  }
+    if (keymap_config.swap_lalt_lgui) {
+        oled_write_P(PSTR(" Mac "), false);
+    } else {
+        oled_write_P(PSTR(" Win "), false);
+    }
 
-  uint8_t led_usb_state = host_keyboard_leds();
-  oled_write_P(PSTR("Lock:"), false);
-  oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK)    ? PSTR(" NUM ") : PSTR("     "), false);
-  oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK)   ? PSTR(" CAPS") : PSTR("     "), false);
-  oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR(" SCRL") : PSTR("     "), false);
+    uint8_t led_usb_state = host_keyboard_leds();
+    oled_write_P(PSTR("Lock:"), false);
+    oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK)    ? PSTR(" NUM ") : PSTR("     "), false);
+    oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK)   ? PSTR(" CAPS") : PSTR("     "), false);
+    oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR(" SCRL") : PSTR("     "), false);
+
+    oled_write(keylog_str, false);
 }
 
 
 void oled_task_user(void) {
-  if (is_master) {
-    render_status();     // Renders the current keyboard state (layer, lock, caps, scroll, etc)
-  } else {
-    render_crkbd_logo();
-    oled_scroll_left();  // Turns on scrolling
-  }
+    if (is_master) {
+        render_status();     // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_crkbd_logo();
+        oled_scroll_left();  // Turns on scrolling
+    }
 }
+
+void matrix_scan_keymap(void) { update_log(); }
 #endif
 
 uint16_t get_tapping_term(uint16_t keycode) {
-  switch (keycode) {
-    case ALT_T(KC_A):
-      return TAPPING_TERM + 100;
-    default:
-      return TAPPING_TERM;
-  }
+    switch (keycode) {
+        case ALT_T(KC_A):
+            return TAPPING_TERM + 100;
+        default:
+            return TAPPING_TERM;
+    }
 }

keyboards/crkbd/keymaps/drashna/rules.mk

@@ -14,9 +14,10 @@ MIDI_ENABLE                = no  # MIDI controls
 AUDIO_ENABLE               = no  # Audio output on port C6
 UNICODE_ENABLE             = no  # Unicode
 BLUETOOTH_ENABLE           = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE            = yes # Enable WS2812 RGB underlight.
+RGBLIGHT_ENABLE            = no  # Enable WS2812 RGB underlight.
 SWAP_HANDS_ENABLE          = no  # Enable one-hand typing
 RGBLIGHT_STARTUP_ANIMATION = yes
+RGB_MATRIX_ENABLE = WS2812
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -24,3 +25,7 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 BOOTLOADER = qmk-dfu
 
 OLED_DRIVER_ENABLE = yes
+
+ifneq ($(strip $(OLED_DRIVER_ENABLE)), yes)
+    RGB_MATRIX_SPLIT_RIGHT=yes
+endif

keyboards/crkbd/keymaps/like_jis/keymap.c

@@ -11,11 +11,6 @@
 
 extern keymap_config_t keymap_config;
 
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
 extern uint8_t is_master;
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
@@ -241,6 +236,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 void matrix_init_user(void) {
   #ifdef RGBLIGHT_ENABLE
     RGB_current_mode = rgblight_config.mode;
+    UPDATE_KEYMAP_STATUS();
   #endif
   //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
   #ifdef SSD1306OLED

keyboards/crkbd/keymaps/rs/config.h

@@ -20,12 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-// place overrides here
-
-/* Use I2C or Serial, not both */
-
-#define USE_SERIAL
-// #define USE_I2C
+//#define USE_MATRIX_I2C
 
 /* Select hand configuration */
 
@@ -33,10 +28,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
+#define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 300
 
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 24
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17

keyboards/crkbd/keymaps/rs/keymap.c

@@ -0,0 +1,39 @@
+#include QMK_KEYBOARD_H
+#include "rs.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,EQL ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     ESCC, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+              |----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,                N  , M  ,COMM,DOT ,SLSH,ENTS,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       LALT,LGUI,SPC ,         BSPC,CODE,FN
+  //                  `----+----+----'        `+---+----+----'c
+  ),
+  [_CODE] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     GRV ,EXLM, AT ,HASH, DLR,PERC,               CIRC,LPLT,ASTR,RPGT,NEQL,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         , 1  , 2  , 3  , 4  , 5  ,               MINS,LBRC, UP ,RBRC,    ,BSLS,
+  //|----+----+----+----+----+----+              |----+----+----+----+----+----|
+         , 6  , 7  , 8  , 9  , 0  ,               AMPR,LEFT,DOWN,RGHT,    ,PIPE,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,DOT ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+  [_FN] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+         , F1 , F2 , F3 , F4 , F5 ,                F6 , F7 , F8 , F9 , F10, F11,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     LTOG,LHUI,LSAI,LVAI,LRST,BRMU,               VOLU,    ,PGUP,    ,    ,    ,
+  //|----+----+----+----+----+----+              |----+----+----+----+----+----|
+     LMOD,LHUD,LSAD,LVAD,RST ,BRMD,               VOLD,CTRA,PGDN,CTRE,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,         MUTE,    ,     
+  //                  `----+----+----'        `----+----+----'
+  ),
+};
+

keyboards/crkbd/keymaps/rs/oled.c

@@ -0,0 +1,104 @@
+#ifdef SSD1306OLED
+#include QMK_KEYBOARD_H
+#include "ssd1306.h"
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#include "split_util.h"
+#endif
+
+extern uint8_t is_master;
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_logo(void);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+
+void matrix_scan_user(void) { iota_gfx_task(); }
+
+typedef struct {
+  uint8_t state;
+  char name[8];
+} LAYER_DISPLAY_NAME;
+
+#define LAYER_DISPLAY_MAX 5
+const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = {
+  {0, "Base"},
+  {2, "Code"},
+  {4, "Fn"},
+  {6, "Fn+Code"},
+  {__UINT8_MAX__, "?"},
+};
+static uint8_t layer_name_idx;
+static char layer_status_buf[24] = "Layer: Base\n";
+
+#ifdef RGBLIGHT_ENABLE
+// Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+void update_keymap_status(void) {
+  snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "Layer:%s RGB: %d\n",
+           layer_display_name[layer_name_idx].name, rgblight_config.mode);
+}
+#else
+void update_keymap_status(void) {
+  snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "Layer:%s\n",
+           layer_display_name[layer_name_idx].name);
+}
+#endif
+
+void matrix_init_user(void) {
+  iota_gfx_init(!has_usb()); // turns on the display
+  update_keymap_status();
+}
+
+// declared in users/rs/rs.c
+void rgb_mod_changed_keymap(void) {
+  update_keymap_status();
+}
+
+// declared in users/rs/rs.c
+void keylog_set_keymap(uint16_t keycode, keyrecord_t *record) {
+  set_keylog(keycode, record);
+}
+
+uint32_t layer_state_set_user(uint32_t state) {
+  for (layer_name_idx = 0; layer_name_idx < LAYER_DISPLAY_MAX; ++layer_name_idx) {
+    if (state == 0 && layer_display_name[layer_name_idx].state == default_layer_state) {
+      break;
+    } else if (state != 0 && layer_display_name[layer_name_idx].state == state) {
+      break;
+    }
+  }
+  update_keymap_status();
+  return state;
+}
+
+static inline void render_keymap_status(struct CharacterMatrix *matrix) {
+  matrix_write(matrix, layer_status_buf);
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+  if (is_master) {
+    render_keymap_status(matrix);
+    matrix_write_ln(matrix, read_keylog());
+    matrix_write_ln(matrix, read_keylogs());
+  } else {
+    matrix_write(matrix, read_logo());
+  }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  matrix_render_user(&matrix);
+  matrix_update(&display, &matrix);
+}
+
+#endif

keyboards/crkbd/keymaps/rs/readme.md

@@ -0,0 +1,19 @@
+# RS40: Code Friendly 40% Keymap
+
+This keymap is an evolution of my previous keymap optimized for coding with a 60% keyboards like the Iris. I tried to keep the simplicity of my previous keymap with all the keys necessary for coding on a single layer in addition to the base one.
+
+Because I sometime have to use my internal keyboard I my macbook, a karabiner configuration is also provided to get most of the features of this keyboard, including the code layer / backspace on right command key etc.
+
+See [rs readme](../../../../users/rs/readme.md) for a list of other keyboards supported by this keymap.
+
+## Base Layer
+
+[![](http://poitr.us/moooMf+)](http://www.keyboard-layout-editor.com/##@_backcolor=%23d8c1f5&switchMount=cherry&pcb:false&plate:true%3B&@_x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=E&_x:8%3B&=I%3B&@_y:-0.87&x:2%3B&=W&_x:1%3B&=R&_x:6%3B&=U&_x:1%3B&=O%3B&@_y:-0.8799999999999999&x:5%3B&=T&_x:4%3B&=Y%3B&@_y:-0.87&c=%233a1ee6&t=%23b84465%3B&=Tab&_c=%236750f2&t=%2344b8b8%3B&=Q&_x:12%3B&=P&_c=%233a1ee6&t=%23b84465&a:5%3B&=+%0A%2F=%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=D&_x:8%3B&=K%3B&@_y:-0.8700000000000001&x:2%3B&=S&_x:1%3B&=F&_x:6%3B&=J&_x:1%3B&=L%3B&@_y:-0.8799999999999999&x:5%3B&=G&_x:4%3B&=H%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465&a:5%3B&=Esc%0ACtrl&_c=%236750f2&t=%2344b8b8&a:7%3B&=A&_x:12&a:5%3B&=%2F:%0A%2F%3B&_c=%233a1ee6&t=%23b84465%3B&=%22%0A'%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=C&_x:8&a:5%3B&=%3C%0A,%3B&@_y:-0.8700000000000001&x:2&a:7%3B&=X&_x:1%3B&=V&_x:6%3B&=M&_x:1&a:5%3B&=%3E%0A.%3B&@_y:-0.8799999999999999&x:5&a:7%3B&=B&_x:4%3B&=N%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=Shift&_c=%236750f2&t=%2344b8b8%3B&=Z&_x:12&a:5%3B&=%3F%0A%2F%2F&_c=%233a1ee6&t=%23b84465&a:7%3B&=Enter%3B&@_y:-0.17999999999999972&x:11.75%3B&=Fn%3B&@_ry:0.25&y:2.95&x:3.3%3B&=Alt%3B&@_r:12&ry:1.75&y:0.5&x:4.8%3B&=Cmd%3B&@_r:35&rx:6.5&ry:4.25&y:-0.75&x:-0.75&c=%23d12424&t=%23ffffff&h:1.5%3B&=Space%3B&@_r:-35&rx:13&y:-2.75&x:-3.0999999999999996&h:1.5%3B&=Back%20Space%3B&@_r:-12&rx:0&ry:0&y:5.55&x:9.55&c=%233a1ee6&t=%23b84465%3B&=Code)
+
+## Code Layer
+
+[![](http://poitr.us/GvljvC+)](http://www.keyboard-layout-editor.com/##@_backcolor=%23d8c1f5&switchMount=cherry&pcb:false&plate:true%3B&@_x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=%23&_x:8%3B&=*%3B&@_y:-0.87&x:2%3B&=%2F@&_x:1%3B&=$&_x:6&a:5%3B&=%3C%0A(&_x:1%3B&=%3E%0A)%3B&@_y:-0.8799999999999999&x:5&a:7%3B&=%25&_x:4%3B&=%5E%3B&@_y:-0.87&c=%233a1ee6&t=%23b84465%3B&=Tab&_c=%236750f2&t=%2344b8b8%3B&=!&_x:12%3B&=!%2F=&_c=%233a1ee6&t=%23b84465&a:5%3B&=+%0A%2F=%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=3&_x:8%3B&=↑%3B&@_y:-0.8700000000000001&x:2%3B&=2&_x:1%3B&=4&_x:6&a:5%3B&=%7B%0A%5B&_x:1%3B&=%7D%0A%5D%3B&@_y:-0.8799999999999999&x:5&a:7%3B&=5&_x:4&a:5%3B&=%2F_%0A-%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=Esc%0ACtrl&_c=%236750f2&t=%2344b8b8&a:7%3B&=1&_x:12&a:5%3B&=%2F:%0A%2F%3B&_c=%233a1ee6&t=%23b84465%3B&=%7C%0A%5C%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=8&_x:8%3B&=↓%3B&@_y:-0.8700000000000001&x:2%3B&=7&_x:1%3B&=9&_x:6%3B&=←&_x:1%3B&=→%3B&@_y:-0.8799999999999999&x:5%3B&=0&_x:4%3B&=%2F&%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=Shift&_c=%236750f2&t=%2344b8b8%3B&=6&_x:12&a:5%3B&=%3F%0A%2F%2F&_c=%233a1ee6&t=%23b84465&a:7%3B&=Enter%3B&@_y:-0.17999999999999972&x:11.75%3B&=Fn%3B&@_ry:0.25&y:2.95&x:3.3%3B&=Alt%3B&@_r:12&ry:1.75&y:0.5&x:4.8%3B&=Cmd%3B&@_r:35&rx:6.5&ry:4.25&y:-0.75&x:-0.75&c=%23d12424&t=%23ffffff&h:1.5%3B&=.%3B&@_r:-35&rx:13&y:-2.75&x:-3.0999999999999996&h:1.5%3B&=Back%20Space%3B&@_r:-12&rx:0&ry:0&y:5.55&x:9.55&c=%233a1ee6&t=%23b84465%3B&=Code)
+
+## Fn Layer
+
+[![](http://poitr.us/OXwmBK+)](http://www.keyboard-layout-editor.com/##@_backcolor=%23d8c1f5&switchMount=cherry&pcb:false&plate:true%3B&@_x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=F3&_x:8%3B&=F8%3B&@_y:-0.87&x:2%3B&=F2&_x:1%3B&=F4&_x:6%3B&=F7&_x:1%3B&=F9%3B&@_y:-0.8799999999999999&x:5%3B&=F5&_x:4%3B&=F6%3B&@_y:-0.87&c=%233a1ee6&t=%23b84465%3B&=&_c=%236750f2&t=%2344b8b8%3B&=F1&_x:12%3B&=F10&_c=%233a1ee6&t=%23b84465%3B&=F11%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8%3B&=RGB%20Value+&_x:8%3B&=Page%20Up%3B&@_y:-0.8700000000000001&x:2%3B&=RGB%20Sat+&_x:1%3B&=RGB%20Reset&_x:6%3B&=&_x:1%3B&=%3B&@_y:-0.8799999999999999&x:5%3B&=Bright+&_x:4%3B&=Vol+%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=RGB%20Toggle&_c=%236750f2&t=%2344b8b8%3B&=RGB%20Hue+&_x:12%3B&=&_c=%233a1ee6&t=%23b84465%3B&=%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8%3B&=RGB%20Value-&_x:8%3B&=Page%20Down%3B&@_y:-0.8700000000000001&x:2%3B&=RGB%20Sat-&_x:1%3B&=Reset&_x:6%3B&=Ctrl+A&_x:1%3B&=Ctrl+E%3B&@_y:-0.8799999999999999&x:5%3B&=Bright-&_x:4%3B&=Vol-%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=RGB%20Mode&_c=%236750f2&t=%2344b8b8%3B&=RGB%20Hue-&_x:12%3B&=&_c=%233a1ee6&t=%23b84465%3B&=%3B&@_y:-0.17999999999999972&x:11.75%3B&=Fn%3B&@_ry:0.25&y:2.95&x:3.3%3B&=%3B&@_r:12&ry:1.75&y:0.5&x:4.8%3B&=%3B&@_r:35&rx:6.5&ry:4.25&y:-0.75&x:-0.75&c=%23d12424&t=%23ffffff&h:1.5%3B&=%3B&@_r:-35&rx:13&y:-2.75&x:-3.0999999999999996&h:1.5%3B&=Mute%3B&@_r:-12&rx:0&ry:0&y:5.55&x:9.55&c=%233a1ee6&t=%23b84465%3B&=Code)

keyboards/crkbd/keymaps/rs/rules.mk

@@ -0,0 +1,32 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
+SWAP_HANDS_ENABLE = no      # Enable one-hand typing
+TAP_DANCE_ENABLE = no
+
+BOOTLOADER = atmel-dfu
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# If you want to change the display of OLED, you need to change here
+SRC +=  oled.c \
+        ./lib/glcdfont.c \
+        ./lib/rgb_state_reader.c \
+        ./lib/layer_state_reader.c \
+        ./lib/logo_reader.c \
+        ./lib/keylogger.c \

keyboards/crkbd/rev1/rev1.c

@@ -51,78 +51,65 @@ void led_set_kb(uint8_t usb_led) {
   //          05    06       06    05
   //           15 14 07     07 14 15              3
 
-/* {row | col << 4} logical layout rows/cols
- *      |                    {x=0..224,     y=0..64} physical layout
- *      |                            |           |     modifier
- *      |                            |           |   */
-#define RGB_MATRIX_LEFT_LEDS  \
-    { { 0xFF           }, {  85, 16 }, 2 }, /*  1 */ \
-    { { 0xFF           }, {  50, 13 }, 2 }, /*  2 */ \
-    { { 0xFF           }, {  16, 20 }, 2 }, /*  3 */ \
-    { { 0xFF           }, {  16, 38 }, 2 }, /*  4 */ \
-    { { 0xFF           }, {  50, 48 }, 2 }, /*  5 */ \
-    { { 0xFF           }, {  85, 52 }, 2 }, /*  6 */ \
-    { { 3 | ( 5 << 4 ) }, {  95, 63 }, 1 }, /*  7 */ \
-    { { 2 | ( 5 << 4 ) }, {  85, 39 }, 4 }, /*  8 */ \
-    { { 1 | ( 5 << 4 ) }, {  85, 21 }, 4 }, /*  9 */ \
-    { { 0 | ( 5 << 4 ) }, {  85,  4 }, 4 }, /* 10 */ \
-    { { 0 | ( 4 << 4 ) }, {  68, 02 }, 4 }, /* 11 */ \
-    { { 1 | ( 4 << 4 ) }, {  68, 19 }, 4 }, /* 12 */ \
-    { { 2 | ( 4 << 4 ) }, {  68, 37 }, 4 }, /* 13 */ \
-    { { 3 | ( 4 << 4 ) }, {  80, 58 }, 1 }, /* 14 */ \
-    { { 3 | ( 3 << 4 ) }, {  60, 55 }, 1 }, /* 15 */ \
-    { { 2 | ( 3 << 4 ) }, {  50, 35 }, 4 }, /* 16 */ \
-    { { 1 | ( 3 << 4 ) }, {  50, 13 }, 4 }, /* 17 */ \
-    { { 0 | ( 3 << 4 ) }, {  50,  0 }, 4 }, /* 18 */ \
-    { { 0 | ( 2 << 4 ) }, {  33,  3 }, 4 }, /* 19 */ \
-    { { 1 | ( 2 << 4 ) }, {  33, 20 }, 4 }, /* 20 */ \
-    { { 2 | ( 2 << 4 ) }, {  33, 37 }, 4 }, /* 21 */ \
-    { { 2 | ( 1 << 4 ) }, {  16, 42 }, 4 }, /* 22 */ \
-    { { 1 | ( 1 << 4 ) }, {  16, 24 }, 4 }, /* 23 */ \
-    { { 0 | ( 1 << 4 ) }, {  16,  7 }, 4 }, /* 24 */ \
-    { { 0 | ( 0 << 4 ) }, {   0,  7 }, 1 }, /* 25 */ \
-    { { 1 | ( 0 << 4 ) }, {   0, 24 }, 1 }, /* 26 */ \
-    { { 2 | ( 0 << 4 ) }, {   0, 41 }, 1 }, /* 27 */
-
-#define RGB_MATRIX_RIGHT_LEDS  \
-    { { 0xFF           }, { 139, 16 }, 2 }, /*  1 */ \
-    { { 0xFF           }, { 174, 13 }, 2 }, /*  2 */ \
-    { { 0xFF           }, { 208, 20 }, 2 }, /*  3 */ \
-    { { 0xFF           }, { 208, 38 }, 2 }, /*  4 */ \
-    { { 0xFF           }, { 174, 48 }, 2 }, /*  5 */ \
-    { { 0xFF           }, { 139, 52 }, 2 }, /*  6 */ \
-    { { 7 | ( 5 << 4 ) }, { 129, 63 }, 1 }, /*  7 */ \
-    { { 6 | ( 5 << 4 ) }, { 139, 39 }, 4 }, /*  8 */ \
-    { { 5 | ( 5 << 4 ) }, { 139, 21 }, 4 }, /*  9 */ \
-    { { 4 | ( 5 << 4 ) }, { 139,  4 }, 4 }, /* 10 */ \
-    { { 4 | ( 4 << 4 ) }, { 156, 02 }, 4 }, /* 11 */ \
-    { { 5 | ( 4 << 4 ) }, { 156, 19 }, 4 }, /* 12 */ \
-    { { 6 | ( 4 << 4 ) }, { 156, 37 }, 4 }, /* 13 */ \
-    { { 7 | ( 4 << 4 ) }, { 144, 58 }, 1 }, /* 14 */ \
-    { { 7 | ( 3 << 4 ) }, { 164, 55 }, 1 }, /* 15 */ \
-    { { 6 | ( 3 << 4 ) }, { 174, 35 }, 4 }, /* 16 */ \
-    { { 5 | ( 3 << 4 ) }, { 174, 13 }, 4 }, /* 17 */ \
-    { { 4 | ( 3 << 4 ) }, { 174,  0 }, 4 }, /* 18 */ \
-    { { 4 | ( 2 << 4 ) }, { 191,  3 }, 4 }, /* 19 */ \
-    { { 5 | ( 2 << 4 ) }, { 191, 20 }, 4 }, /* 20 */ \
-    { { 6 | ( 2 << 4 ) }, { 191, 37 }, 4 }, /* 21 */ \
-    { { 6 | ( 1 << 4 ) }, { 208, 42 }, 4 }, /* 22 */ \
-    { { 5 | ( 1 << 4 ) }, { 208, 24 }, 4 }, /* 23 */ \
-    { { 4 | ( 1 << 4 ) }, { 208,  7 }, 4 }, /* 24 */ \
-    { { 4 | ( 0 << 4 ) }, { 224,  7 }, 1 }, /* 25 */ \
-    { { 5 | ( 0 << 4 ) }, { 224, 24 }, 1 }, /* 26 */ \
-    { { 6 | ( 0 << 4 ) }, { 224, 41 }, 1 }, /* 27 */
 
 #ifdef RGB_MATRIX_SPLIT_RIGHT
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-        RGB_MATRIX_RIGHT_LEDS
-        RGB_MATRIX_LEFT_LEDS
-    };
+led_config_t g_led_config = { {
+    {  51,  50,  45,  44,  37,  36, NO_LED },
+    {  52,  49,  46,  43,  38,  35, NO_LED },
+    {  53,  48,  47,  42,  39,  34, NO_LED },
+    { NO_LED, NO_LED, NO_LED,  41,  40,  33, NO_LED },
+    {  24,  23,  18,  17,  10,   9, NO_LED },
+    {  25,  22,  19,  16,  11,   8, NO_LED },
+    {  26,  21,  20,  15,  12,   7, NO_LED },
+    { NO_LED, NO_LED, NO_LED,  14,  13,   6, NO_LED }
+}, {
+    { 139,  16 }, { 174,  13 }, { 208,  20 }, { 208,  38 }, { 174,  48 }, { 139,  52 }, { 129,  63 },
+    { 139,  39 }, { 139,  21 }, { 139,   4 }, { 156,   2 }, { 156,  19 }, { 156,  37 }, { 144,  58 },
+    { 164,  55 }, { 174,  35 }, { 174,  13 }, { 174,   0 }, { 191,   3 }, { 191,  20 }, { 191,  37 },
+    { 208,  42 }, { 208,  24 }, { 208,   7 }, { 224,   7 }, { 224,  24 }, { 224,  41 }, {  85,  16 },
+    {  50,  13 }, {  16,  20 }, {  16,  38 }, {  50,  48 }, {  85,  52 }, {  95,  63 }, {  85,  39 },
+    {  85,  21 }, {  85,   4 }, {  68,   2 }, {  68,  19 }, {  68,  37 }, {  80,  58 }, {  60,  55 },
+    {  50,  35 }, {  50,  13 }, {  50,   0 }, {  33,   3 }, {  33,  20 }, {  33,  37 }, {  16,  42 },
+    {  16,  24 }, {  16,   7 }, {   0,   7 }, {   0,  24 }, {   0,  41 }
+}, {
+    2, 2, 2, 2, 2, 2, 1,
+    4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 1, 1, 1, 2,
+    2, 2, 2, 2, 2, 1, 4,
+    4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4,
+    4, 4, 1, 1, 1
+} };
 #else
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-        RGB_MATRIX_LEFT_LEDS
-        RGB_MATRIX_RIGHT_LEDS
-    };
+led_config_t g_led_config = { {
+    {  24,  23,  18,  17,  10,   9, NO_LED },
+    {  25,  22,  19,  16,  11,   8, NO_LED },
+    {  26,  21,  20,  15,  12,   7, NO_LED },
+    { NO_LED, NO_LED, NO_LED,  14,  13,   6, NO_LED },
+    {  51,  50,  45,  44,  37,  36, NO_LED },
+    {  52,  49,  46,  43,  38,  35, NO_LED },
+    {  53,  48,  47,  42,  39,  34, NO_LED },
+    { NO_LED, NO_LED, NO_LED,  41,  40,  33, NO_LED }
+}, {
+    {  85,  16 }, {  50,  13 }, {  16,  20 }, {  16,  38 }, {  50,  48 }, {  85,  52 }, {  95,  63 },
+    {  85,  39 }, {  85,  21 }, {  85,   4 }, {  68,   2 }, {  68,  19 }, {  68,  37 }, {  80,  58 },
+    {  60,  55 }, {  50,  35 }, {  50,  13 }, {  50,   0 }, {  33,   3 }, {  33,  20 }, {  33,  37 },
+    {  16,  42 }, {  16,  24 }, {  16,   7 }, {   0,   7 }, {   0,  24 }, {   0,  41 }, { 139,  16 },
+    { 174,  13 }, { 208,  20 }, { 208,  38 }, { 174,  48 }, { 139,  52 }, { 129,  63 }, { 139,  39 },
+    { 139,  21 }, { 139,   4 }, { 156,   2 }, { 156,  19 }, { 156,  37 }, { 144,  58 }, { 164,  55 },
+    { 174,  35 }, { 174,  13 }, { 174,   0 }, { 191,   3 }, { 191,  20 }, { 191,  37 }, { 208,  42 },
+    { 208,  24 }, { 208,   7 }, { 224,   7 }, { 224,  24 }, { 224,  41 }
+}, {
+    2, 2, 2, 2, 2, 2, 1,
+    4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 1, 1, 1, 2,
+    2, 2, 2, 2, 2, 1, 4,
+    4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4,
+    4, 4, 1, 1, 1
+} };
 #endif
 
 #endif

keyboards/crkbd/ssd1306.c

@@ -13,7 +13,7 @@
 #include "sendchar.h"
 #include "timer.h"
 
-static const unsigned char font[] PROGMEM;
+extern const unsigned char font[] PROGMEM;
 
 // Set this to 1 to help diagnose early startup problems
 // when testing power-on with ble.  Turn it off otherwise,

keyboards/doro67/multi/multi.c

@@ -19,6 +19,7 @@ void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 
+    setPinOutput(E6);
 	matrix_init_user();
 }
 
@@ -39,5 +40,11 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 
+	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+		writePinLow(E6);
+	} else {
+		writePinHigh(E6);
+	}
+
 	led_set_user(usb_led);
 }

keyboards/doro67/rgb/rgb.c

@@ -14,6 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rgb.h"
+#include "rgb_matrix_types.h"
 
 // Optional override functions below.
 // You can leave any or all of these undefined.
@@ -52,76 +53,32 @@ void led_set_kb(uint8_t usb_led) {
 	led_set_user(usb_led);
 }
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-    {{0|(0<<4)},   {15*0, 0},  4},     // Esc
-    {{0|(1<<4)},   {15*1, 0},  4},     // 1
-    {{0|(2<<4)},   {15*2, 0},  4},     // 2
-    {{0|(3<<4)},   {15*3, 0},  4},     // 3
-    {{0|(4<<4)},   {15*4, 0},  4},     // 4
-    {{0|(5<<4)},   {15*5, 0},  4},     // 5
-    {{0|(6<<4)},   {15*6, 0},  4},     // 6
-    {{0|(7<<4)},   {15*7, 0},  4},     // 7
-    {{0|(8<<4)},   {15*8, 0},  4},     // 8
-    {{0|(9<<4)},   {15*9, 0},  4},     // 9
-    {{0|(10<<4)},  {15*10, 0}, 4},     // 0
-    {{0|(11<<4)},  {15*11, 0}, 4},     // -
-    {{0|(12<<4)},  {15*12, 0}, 4},     // =
-    {{0|(13<<4)},  {15*13.5, 0}, 1},   // Backspace
-    {{0|(14<<4)},  {15*15, 0},   1},   // Ins
-
-    {{1|(0<<4)},   {15*0.5, 16},  1},  // Tab
-    {{1|(1<<4)},   {15*1.5, 16},  4},  // Q
-    {{1|(2<<4)},   {15*2.5, 16},  4},  // W
-    {{1|(3<<4)},   {15*3.5, 16},  4},  // E
-    {{1|(4<<4)},   {15*4.5, 16},  4},  // R
-    {{1|(5<<4)},   {15*5.5, 16},  4},  // T
-    {{1|(6<<4)},   {15*6.5, 16},  4},  // Y
-    {{1|(7<<4)},   {15*7.5, 16},  4},  // U
-    {{1|(8<<4)},   {15*8.5, 16},  4},  // I
-    {{1|(9<<4)},   {15*9.5, 16},  4},  // O
-    {{1|(10<<4)},  {15*10.5, 16}, 4},  // P
-    {{1|(11<<4)},  {15*11.5, 16}, 4},  // [
-    {{1|(12<<4)},  {15*12.5, 16},  4}, // ]
-    {{1|(13<<4)},  {15*13.75, 16}, 1}, //
-    {{1|(14<<4)},  {15*15, 16},    1}, // Del
-
-    {{2|(0<<4)},   {15*0.75, 32},  1}, // Capslock
-    {{2|(1<<4)},   {15*1.75, 32},  4}, // A
-    {{2|(2<<4)},   {15*2.75, 32},  4}, // S
-    {{2|(3<<4)},   {15*3.75, 32},  4}, // D
-    {{2|(4<<4)},   {15*4.75, 32},  4}, // F
-    {{2|(5<<4)},   {15*5.75, 32},  4}, // G
-    {{2|(6<<4)},   {15*6.75, 32},  4}, // H
-    {{2|(7<<4)},   {15*7.75, 32},  4}, // J
-    {{2|(8<<4)},   {15*8.75, 32},  4}, // K
-    {{2|(9<<4)},   {15*9.75, 32},  4}, // L
-    {{2|(10<<4)},  {15*10.75, 32}, 4}, // ;
-    {{2|(11<<4)},  {15*11.75, 32}, 4}, // '
-    {{2|(13<<4)},  {15*13.25, 32}, 1}, // Enter
-    {{2|(14<<4)},  {15*15, 32},    1}, // Pgup
-
-    {{3|(0<<4)},   {15*1.25, 48},  1}, // LShift
-    {{3|(2<<4)},   {15*2, 48},  4},    // Z
-    {{3|(3<<4)},   {15*3, 48},  4},    // X
-    {{3|(4<<4)},   {15*4, 48},  4},    // C
-    {{3|(5<<4)},   {15*5, 48},  4},    // V
-    {{3|(6<<4)},   {15*6, 48},  4},    // B
-    {{3|(7<<4)},   {15*7, 48},  4},    // N
-    {{3|(8<<4)},   {15*8, 48},  4},    // M
-    {{3|(9<<4)},   {15*9, 48},  4},    // ,
-    {{3|(10<<4)},  {15*10, 48},  4},   // .
-    {{3|(11<<4)},  {15*11, 48}, 4},    // /
-    {{3|(12<<4)},  {15*12.75, 48}, 1}, // Shift
-    {{3|(13<<4)},  {15*14, 48}, 1},    // Up
-    {{3|(14<<4)},  {15*15, 48}, 1},    // Pgdn
-
-    {{4|(0<<4)},   {15*0.25,  64}, 1}, // Ctrl
-    {{4|(1<<4)},   {15*1.5,   64}, 1}, // GUI
-    {{4|(2<<4)},   {15*2.25,  64}, 1}, // Alt
-    {{4|(3<<4)},   {15*6.75,  64}, 4}, // Space
-    {{4|(9<<4)},   {15*9,     64}, 1}, // RAlt
-    {{4|(10<<4)},  {15*10.25, 64}, 1}, // FN
-    {{4|(12<<4)},  {15*13,    64}, 1}, // Left
-    {{4|(13<<4)},  {15*14,    64}, 1}, // Down
-    {{4|(14<<4)},  {15*15,    64}, 1}, // Right
-};
+led_config_t g_led_config = { {
+  {   0,   1,   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13,  14 },
+  {  15,  16,  17,  18,  19,  20,  21,  22,  23,  24,  25,  26,  27,  28,  29 },
+  {  30,  31,  32,  33,  34,  35,  36,  37,  38,  39,  40,  41, NO_LED,  42,  43 },
+  {  44, NO_LED,  45,  46,  47,  48,  49,  50,  51,  52,  53,  54,  55,  56,  57 },
+  {  58,  59,  60,  61, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED,  62,  63, NO_LED,  64,  65,  66 }
+}, {
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Ins
+    {   0,   0 }, {  15,   0 }, {  30,   0 }, {  45,   0 }, {  60,   0 }, {  75,   0 }, {  90,   0 }, { 105,   0 }, { 120,   0 }, { 135,   0 }, { 150,   0 }, { 165,   0 }, { 180,   0 }, { 202,   0 }, { 225,   0 },
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  , Del
+    {   7,  16 }, {  22,  16 }, {  37,  16 }, {  52,  16 }, {  67,  16 }, {  82,  16 }, {  97,  16 }, { 112,  16 }, { 127,  16 }, { 142,  16 }, { 157,  16 }, { 172,  16 }, { 187,  16 }, { 206,  16 }, { 225,  16 },
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Pgup
+    {  11,  32 }, {  26,  32 }, {  41,  32 }, {  56,  32 }, {  71,  32 }, {  86,  32 }, { 101,  32 }, { 116,  32 }, { 131,  32 }, { 146,  32 }, { 161,  32 }, { 176,  32 }, { 198,  32 }, { 225,  32 },
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Pgdn
+    {  18,  48 }, {  30,  48 }, {  45,  48 }, {  60,  48 }, {  75,  48 }, {  90,  48 }, { 105,  48 }, { 120,  48 }, { 135,  48 }, { 150,  48 }, { 165,  48 }, { 191,  48 }, { 210,  48 }, { 225,  48 },
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
+    {   3,  64 }, {  22,  64 }, {  33,  64 }, { 101,  64 }, { 135,  64 }, { 153,  64 }, { 195,  64 }, { 210,  64 }, { 225,  64 }
+}, {
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Ins
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  , Del
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Pgup
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Pgdn
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
+    1, 1, 1, 4, 1, 1, 1, 1, 1
+} };

keyboards/dz60/dz60.h

@@ -386,4 +386,31 @@
     { k40,   k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, KC_NO, k4b,  KC_NO, k4d,  k4e   }  \
 }
 
+/* LAYOUT_60_iso_split_space_bs_rshift
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤
+ * │30  |31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬┴───┤
+ * │40  │41  │43  │44      │46  │48        │4a  │4b  │4d  │4e  │
+ * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘
+*/
+#define LAYOUT_60_iso_split_space_bs_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b,      k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,   KC_NO,k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   KC_NO,k4d,  k4e   }  \
+}
+
 #endif

keyboards/dz60/info.json

@@ -60,6 +60,10 @@
     "LAYOUT_60_tsangan_hhkb": {
       "key_count": 62,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Win", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+    },
+    "LAYOUT_60_iso_split_space_bs_rshift": {
+      "key_count": 66,
+      "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Del", "x":13, "y":0, "w":1}, {"label":"Backspace", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Print screen", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"label":"FN", "x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
     }
   }
 }

keyboards/dz60/keymaps/billiams/keymap.c

@@ -12,7 +12,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |-----------------------------------------------------------------------------------------+
    * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |Tap(/) Shft|  U  | ESC |
    * |-----------------------------------------------------------------------------------------+
-   * | Ctrl |  Alt  |  Cmd  |              Space                | Cmd |  Fn  |  L  |  D  |  R  |
+   * | Ctrl |  Alt  |  Cmd  |              Space                | Alt |  Fn  |  L  |  D  |  R  |
    * `-----------------------------------------------------------------------------------------'
    */
 
@@ -21,16 +21,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
       MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
       KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, _______, RSFT_T(KC_SLSH) , KC_UP, KC_ESCAPE,
-      KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT
+      KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT
       ),
 
   /* FN Layer
    * ,-----------------------------------------------------------------------------------------.
    * |     |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
    * |-----------------------------------------------------------------------------------------+
-   * |        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+|     |     | MUTE | Vol- | Vol+ |
+   * |        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| Mute | Vol-| Vol+| Prev | Next |
    * |-----------------------------------------------------------------------------------------+
-   * |         |     |     |     |     |     |     |     |    |     | Prev | Next | Play/Pause |
+   * |         |     |     |     |     |     | Left| Down| Up |Right|      |      | Play/Pause |
    * |-----------------------------------------------------------------------------------------+
    * |           |     |     |     |     |     |     |     |Scr- |Scr+ |           |PG_UP|RESET|
    * |-----------------------------------------------------------------------------------------+
@@ -40,8 +40,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   LAYOUT_directional(
       _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, KC_F11, KC_F12, _______, KC_DEL,
-      _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, KC_MUTE, KC__VOLDOWN, KC__VOLUP,
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MRWD, KC_MFFD,
+      _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_MUTE, KC__VOLDOWN, KC__VOLUP, KC_MRWD, KC_MFFD,
+      _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______,
       KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, KC_BRID, KC_BRIU, _______, _______, KC_PGUP, RESET,
       _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDOWN, KC_END
       ),

keyboards/dz60/keymaps/billiams/readme.md

@@ -10,9 +10,8 @@ Settings:
 * Del is available as `Fn` + `Backspace`
 * `/ ?` are available when you tap the right shift. Otherwise RShift is shift when held down
 * RESET is available as `Fn`+ ` ESC`
-* Underglow toggle and mode selection are available as `Fn` + `Q` and `Fn` + `S`. Yes your keyboard has lights even if you didn't get the LEDs. Bonus!
-* Media play/pause doesn't seem to work with anything but iTunes at the moment. FML
-
+* Underglow toggle is available as `Fn` + `Q`. Yes your keyboard has lights even if you didn't get the LEDs. Bonus!
+* vim-style arrow key bindings H J K L in layer 1
 
 ### Initial Installation
 
@@ -51,7 +50,7 @@ Hope this helps!
 |-----------------------------------------------------------------------------------------+
 | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | Tap:/ RSh |  U  | ESC |
 |-----------------------------------------------------------------------------------------+
-| Ctrl |  Alt  |  Cmd  |              Space                | Cmd |  Fn  |  L  |  D  |  R  |
+| Ctrl |  Alt  |  Cmd  |              Space                | Alt |  Fn  |  L  |  D  |  R  |
 `-----------------------------------------------------------------------------------------'
 ```
 
@@ -61,9 +60,9 @@ FN Layer
 ,-----------------------------------------------------------------------------------------.
 |  `  |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
 |-----------------------------------------------------------------------------------------+
-|        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+|     |     | MUTE | Vol- | Vol+ |
+|        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| Mute | Vol-| Vol+| Prev | Next |
 |-----------------------------------------------------------------------------------------+
-|         |     |     |     |     |     |     |     |     |    | Prev | Next | Play/Pause |
+|         |     |     |     |     |     | Left| Down| Up |Right|      |      | Play/Pause |
 |-----------------------------------------------------------------------------------------+
 |           |     |     |     |     |     |     |     |Scr- |Scr+ |         | PG_UP |RESET|
 |-----------------------------------------------------------------------------------------+

keyboards/dz60/keymaps/macos_64/config.h

@@ -0,0 +1,9 @@
+#ifndef CONFIG_KEYMAP_H
+#define CONFIG_KEYMAP_H
+
+#include "../../config.h"
+
+// Fix KC_GESC conflict with Cmd+Alt+Esc on macos
+#define GRAVE_ESC_GUI_OVERRIDE
+
+#endif

keyboards/dz60/keymaps/macos_64/keymap.c

@@ -0,0 +1,42 @@
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* ,-----------------------------------------------------------------------------------------.
+   * | Esc | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
+   * |-----------------------------------------------------------------------------------------+
+   * | Tab    | Q   | W   | E   | R   | T   | Y   | U   | I   | O   | P   | [   | ]   |   \    |
+   * |-----------------------------------------------------------------------------------------+
+   * | Caps     | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
+   * |-----------------------------------------------------------------------------------------+
+   * | Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   |Shift| Up |Delete|
+   * |-----------------------------------------------------------------------------------------+
+   * | Ctrl | Alt  | Cmd  |               Space                |   Fn  | Alt | Left| Down|Right|
+   * `-----------------------------------------------------------------------------------------'
+   */
+  LAYOUT_all(
+    KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DELETE,
+    KC_LCTL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_NO, MO(1), KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
+
+  /* ,-----------------------------------------------------------------------------------------.
+   * | ` ~ | BR- | BR+ |     |     |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |    Delete   |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |     |     |  Up |     |     |     |     |  0  |  1  |  2  |  3  |     |  RESET |
+   * |-----------------------------------------------------------------------------------------+
+   * |         |     | Left| Down|Right|     |     |     |     |  4  |  5  |  6  |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |     |     |     |     |     |     |     |     |  7  |  8  |  9  |     |     |
+   * |-----------------------------------------------------------------------------------------+
+   * |      |      |      |                                      |     |     |     |     |     |
+   * `-----------------------------------------------------------------------------------------'
+   */
+  LAYOUT_all(
+    KC_GRV , KC_SCROLLLOCK, KC_PAUSE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_NO, KC_DEL,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_1, KC_2, KC_3, KC_TRNS, RESET,
+    KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS,
+    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/dz60/keymaps/macos_64/readme.md

@@ -0,0 +1,45 @@
+# MacOS 64 keymap
+
+This is a keymap of DZ60 configured with 64 keys for MacOS. It refers the keymap of [macos_arrow](../macos_arrow/readme.md).
+
+## How to use
+
+1. Follow the [introduction](https://docs.qmk.fm/#/) to compile the keymap
+2. Download QMK Toolbox from [here](https://github.com/qmk/qmk_toolbox/releases)
+3. Insert the dz60 keyboard while pressing  ```Space+b``` (default)
+4. Flash the firmware
+
+More details about flashing firmware please check the [documentation](https://docs.qmk.fm/#/) of QMK.
+
+## Base Layer
+
+```
+,-----------------------------------------------------------------------------------------.
+| Esc | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
+|-----------------------------------------------------------------------------------------+
+| Tab    | Q   | W   | E   | R   | T   | Y   | U   | I   | O   | P   | [   | ]   |   \    |
+|-----------------------------------------------------------------------------------------+
+| Caps     | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
+|-----------------------------------------------------------------------------------------+
+| Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   |Shift| Up |Delete|
+|-----------------------------------------------------------------------------------------+
+| Ctrl | Alt  | Cmd  |               Space                |   Fn  | Alt | Left| Down|Right|
+`-----------------------------------------------------------------------------------------'
+```
+
+## Fn Layer
+
+```
+,-----------------------------------------------------------------------------------------.
+| ` ~ | BR- | BR+ |     |     |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |    Delete   |
+|-----------------------------------------------------------------------------------------+
+|        |     |     |  Up |     |     |     |     |  0  |  1  |  2  |  3  |     |  RESET |
+|-----------------------------------------------------------------------------------------+
+|         |     | Left| Down|Right|     |     |     |     |  4  |  5  |  6  |             |
+|-----------------------------------------------------------------------------------------+
+|           |     |     |     |     |     |     |     |     |  7  |  8  |  9  |     |     |
+|-----------------------------------------------------------------------------------------+
+|      |      |      |                                      |     |     |     |     |     |
+`-----------------------------------------------------------------------------------------'
+
+```

keyboards/dz60/keymaps/macos_64/rules.mk

@@ -1,2 +1,2 @@
 BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/dz60/keymaps/macos_arrow/keymap.c

@@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |-----------------------------------------------------------------------------------------+
    * | Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   |     | Up  |Shift|
    * |-----------------------------------------------------------------------------------------+
-   * | Ctrl | Alt  | Gui  |             Space / _NL            |Gui/_ML| Alt | Left| Down|Right|
+   * | Ctrl | Alt  | Gui  |                Space               |Gui/_ML| Alt | Left| Down|Right|
    * `-----------------------------------------------------------------------------------------'
    */
   [_BL] = LAYOUT_all(
@@ -30,25 +30,25 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
     LT(_FL, KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
     KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_A, KC_UP, KC_RSFT,
-    KC_LCTL, KC_LALT, KC_LGUI, KC_NO, LT(_NL, KC_SPC), KC_NO, LM(_ML, MOD_RGUI), KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
+    KC_LCTL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_NO, LM(_ML, MOD_RGUI), KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
 
   /* ,-----------------------------------------------------------------------------------------.
    * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
    * |-----------------------------------------------------------------------------------------+
-   * |        |     |     |     |     |     |     |PgUp |     |     |     |     |     |        |
+   * |        |     |     | PgUp|     |     |     |     | Up  |     |     |     |     |        |
    * |-----------------------------------------------------------------------------------------+
-   * |          |     |     |     |     |     | Left| Down|  Up |Right|     |     |            |
+   * |          |     |Home |PgDwn| End |     |     | Left| Down|Right|     |     |            |
    * |-----------------------------------------------------------------------------------------+
-   * |           |     |     |     |     |     |     |PgDwn|     |     |     |     |     |     |
+   * |           |     |     |     |     |     |     |     |     |     |     |     |     |     |
    * |-----------------------------------------------------------------------------------------+
    * |      |      |      |                                      |     |     |     |     |     |
    * `-----------------------------------------------------------------------------------------'
    */
   [_FL] = LAYOUT_all(
     _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL,
-    _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______, _______,
-    _______, KC_NO,  _______, _______, _______, _______, _______, _______, KC_PGDN, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, KC_PGUP, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______,
+    _______, _______, KC_HOME, KC_PGDN, KC_END, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______,
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
 
   /* ,-----------------------------------------------------------------------------------------.
@@ -64,30 +64,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-----------------------------------------------------------------------------------------'
    */
   [_ML] = LAYOUT_all(
-    KC_MEDIA_EJECT, BR_DOWN, BR_UP, _______, _______, _______, _______, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_NO, _______,
+    KC_MEDIA_EJECT, BR_DOWN, BR_UP, BL_TOGG, RGB_TOG, _______, _______, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_NO, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, KC_NO,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
-
-  /* ,-----------------------------------------------------------------------------------------.
-   * |     |     |     |     |     |     |     |     |  %  |  (  |  )  |  < |  > |             |
-   * |-----------------------------------------------------------------------------------------+
-   * |        |     |     |     |     |     |     |  *  |  0  |  1  |  2  |  3  |     |        |
-   * |-----------------------------------------------------------------------------------------+
-   * |          |     |     |     |     |     |     |  .  |  -  |  4  |  5  |  6  |            |
-   * |-----------------------------------------------------------------------------------------+
-   * |           |     |     |     |     |     |     |  ,  |  =  |  7  |  8  |  9  |     |     |
-   * |-----------------------------------------------------------------------------------------+
-   * |      |      |      |                                      |     |     |     |     |     |
-   * `-----------------------------------------------------------------------------------------'
-   */
-  [_NL] = LAYOUT_all(
-    _______, _______, _______, _______, _______, _______, _______, _______, KC_PERCENT, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_LEFT_ANGLE_BRACKET, KC_RIGHT_ANGLE_BRACKET, KC_NO, _______,
-    _______, _______, _______, _______, _______, _______, _______, KC_ASTERISK, KC_0, KC_1, KC_2, KC_3, _______, RESET,
-    _______, _______, _______, _______, _______, _______, _______, KC_DOT, KC_MINS, KC_4, KC_5, KC_6, _______,
-    _______, KC_NO,  _______, _______, _______, _______, _______, _______, KC_COMMA, KC_EQL, KC_7, KC_8, KC_9, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_BRTG, BL_INC, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, RGB_MODE_REVERSE, BL_DEC, RGB_MODE_FORWARD),
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {

keyboards/dz60/keymaps/macos_arrow/rules.mk

@@ -1,2 +1,2 @@
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes

keyboards/dz60/keymaps/olligranlund_iso/keymap.c

@@ -0,0 +1,38 @@
+#include QMK_KEYBOARD_H
+
+/* ISO 60 layout by olligranlund
+*
+* This layout starts from a standard ISO 60% layout, and adds one function layer.
+* If you wish to only have one wide spacebar, you can easily do that by dismissing the "side" spacebar switches.
+*
+* Default Layer
+* ,-----------------------------------------------------------------------------------------.
+* | Esc | 1 ! | 2 " | 3 § | 4 $ | 5 % | 6 & | 7 / | 8 ( | 9 ) | 0 = | ß ? | ´ ` | Del | BSPC|
+* |-----------------------------------------------------------------------------------------|
+* | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  Ä  | + * | Enter  |
+* |----------------------------------------------------------------------------------       |
+* | FN      |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  Ö  |  Ü  | # ' |       |
+* |-----------------------------------------------------------------------------------------|
+* | Shift | < > |  Z  |  X  |  C  |  V  |  B  |  N  |  M  | , ; | . : | - _ |  Shift  |Shift|
+* |-----------------------------------------------------------------------------------------|
+* | LCtl  | LGUI  | LAlt  |  Space      | Space |  Space      | RAlt  | FN    | App  | RCtl |
+* `-----------------------------------------------------------------------------------------'
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_60_iso_split_space_bs_rshift(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,     KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_DEL, KC_BSPC,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,     KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+		MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,     KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,     KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_PSCR,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_APP,  KC_RCTL),
+
+	LAYOUT_60_iso_split_space_bs_rshift(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
+		KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   KC_NO,   KC_NO,   KC_PGDOWN,KC_UP,   KC_PGUP, KC_NO,   KC_NO,   KC_NO,
+		KC_NO,   KC_VOLD, KC_MUTE, KC_VOLU, KC_NO,   KC_NO,   KC_HOME,  KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,   KC_NO,   KC_NO,
+		KC_LSFT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_END,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_RSFT, KC_CAPS,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_APP,  KC_RCTL),
+
+};

keyboards/dz60/keymaps/olligranlund_iso/readme.md

@@ -0,0 +1,6 @@
+# DZ60 with splitted parts
+### by Oliver Granlund
+
+![Finished product](https://i.imgur.com/HlEo5Yg.jpg)
+
+This is still under progress, but currently works on Windows as a daily driver.

keyboards/dztech/dz40rgb/config.h

@@ -21,7 +21,7 @@
 
 #define DEBOUNCE 3
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define DISABLE_RGB_MATRIX_SPLASH
 #define DISABLE_RGB_MATRIX_MULTISPLASH

keyboards/dztech/dz40rgb/dz40rgb.c

@@ -52,7 +52,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, E_3,    D_3,    F_3},
     {0, E_2,    D_2,    F_2},
     {0, E_1,    D_1,    F_1},
-	
+
     {0, E_13,   D_13,   F_13},
     {0, E_14,   D_14,   F_14},
 
@@ -71,70 +71,25 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+led_config_t g_led_config = { {
+    {  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29,  28 },
+    {  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42 }
+}, {
+    { 223,   0 }, { 203,   0 }, { 183,   0 }, { 162,   0 }, { 142,   0 }, { 122,   0 }, { 101,   0 }, {  81,   0 }, {  61,   0 }, {  40,   0 }, {  20,   0 }, {   0,   0 },
+    { 223,  10 }, {   0,  10 }, { 223,  21 }, { 203,  21 }, { 183,  21 }, { 162,  21 }, { 142,  21 }, { 122,  21 }, { 101,  21 }, {  81,  21 }, {  61,  21 }, {  40,  21 },
+    {  20,  21 }, {   0,  21 }, { 223,  31 }, {   0,  31 }, { 223,  42 }, { 203,  42 }, { 183,  42 }, { 162,  42 }, { 142,  42 }, { 122,  42 }, { 101,  42 }, {  81,  42 },
+    {  61,  42 }, {  40,  42 }, {  20,  42 }, {   0,  42 }, { 223,  53 }, {   0,  53 }, { 223,  63 }, { 203,  63 }, { 183,  63 }, { 162,  63 }, { 142,  63 }, { 122,  63 },
+    { 101,  63 }, {  81,  63 }, {  61,  63 }, {  40,  63 }, {  20,  63 }, {   0,  63 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 1, 1
+} };
 
-    {{0|(11<<4)},   {20.36*11,  0}, 1},
-    {{0|(10<<4)},   {20.36*10,  0}, 1},
-    {{0|(9<<4)},    {20.36*9,  0}, 1},
-    {{0|(8<<4)},    {20.36*8,  0}, 1},
-    {{0|(7<<4)},    {20.36*7,  0}, 1},
-	{{0|(6<<4)},    { 20.36*6,  0}, 1},
-    {{0|(5<<4)},    { 20.36*5,  0}, 1},
-    {{0|(4<<4)},    { 20.36*4,  0}, 1},
-    {{0|(3<<4)},    { 20.36*3,  0}, 1},
-    {{0|(2<<4)},    { 20.36*2,  0}, 1},
-    {{0|(1<<4)},    { 20.36*1,  0}, 1},
-    {{0|(0<<4)},    { 20.36*0,  0}, 1},
-
-    {{0|(12<<4)},   {20.36*11, 21.33*0.5}, 1},
-    {{0|(13<<4)},  {20.36*0,21.33*0.5}, 1},
-
-    {{1|(11<<4)},   {20.36*11,  21.33}, 1},
-    {{1|(10<<4)},   {20.36*10,  21.33}, 4},
-    {{1|(9<<4)},    {20.36*9,  21.33}, 4},
-    {{1|(8<<4)},    {20.36*8,  21.33}, 4},
-    {{1|(7<<4)},    {20.36*7,  21.33}, 4},
-    {{1|(6<<4)},    { 20.36*6,  21.33}, 4},
-    {{1|(5<<4)},    { 20.36*5,  21.33}, 4},
-    {{1|(4<<4)},    { 20.36*4,  21.33}, 4},
-    {{1|(3<<4)},    { 20.36*3,  21.33}, 4},
-    {{1|(2<<4)},    { 20.36*2,  21.33}, 4},
-    {{1|(1<<4)},    { 20.36*1,  21.33}, 4},
-    {{1|(0<<4)},    { 20.36*0,  21.33}, 1},
-
-    {{1|(12<<4)},   {20.36*11, 21.33*1.5}, 1},
-    {{1|(13<<4)},  {20.36*0,21.33*1.5}, 1},
-
-    {{2|(11<<4)},   {20.36*11,  21.33*2}, 1},
-    {{2|(10<<4)},   {20.36*10,  21.33*2}, 4},
-    {{2|(9<<4)},    {20.36*9,  21.33*2}, 4},
-    {{2|(8<<4)},    {20.36*8,  21.33*2}, 4},
-    {{2|(7<<4)},    {20.36*7,  21.33*2}, 4},
-    {{2|(6<<4)},    { 20.36*6,  21.33*2}, 4},
-    {{2|(5<<4)},    { 20.36*5,  21.33*2}, 4},
-    {{2|(4<<4)},    { 20.36*4,  21.33*2}, 4},
-    {{2|(3<<4)},    { 20.36*3,  21.33*2}, 4},
-    {{2|(2<<4)},    { 20.36*2,  21.33*2}, 4},
-    {{2|(1<<4)},    { 20.36*1,  21.33*2}, 4},
-    {{2|(0<<4)},    { 20.36*0,  21.33*2}, 1},
-
-    {{2|(12<<4)},   {20.36*11, 21.33*2.5}, 1},
-    {{2|(13<<4)},  {20.36*0,21.33*2.5}, 1},
-
-    {{3|(11<<4)},   {20.36*11,  21.33*3}, 1},
-    {{3|(10<<4)},   {20.36*10,  21.33*3}, 1},
-    {{3|(9<<4)},    {20.36*9,  21.33*3}, 1},
-    {{3|(8<<4)},    {20.36*8,  21.33*3}, 1},
-    {{3|(7<<4)},    {20.36*7,  21.33*3}, 1},
-	{{3|(6<<4)},    { 20.36*6,  21.33*3}, 1},
-    {{3|(5<<4)},    { 20.36*5,  21.33*3}, 1},
-    {{3|(4<<4)},    { 20.36*4,  21.33*3}, 1},
-    {{3|(3<<4)},    { 20.36*3,  21.33*3}, 1},
-    {{3|(2<<4)},    { 20.36*2,  21.33*3}, 1},
-    {{3|(1<<4)},    { 20.36*1,  21.33*3}, 1},
-    {{3|(0<<4)},    { 20.36*0,  21.33*3}, 1}
-
-};
 #else
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 /* Refer to IS31 manual for these locations
@@ -205,93 +160,44 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+led_config_t g_led_config = { {
+    {  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29,  28 },
+    {  52,  51,  50,  49,  48, NO_LED,  47,  46,  45,  44,  43,  42 }
+}, {
+    { 223,   0 }, { 203,   0 }, { 183,   0 }, { 162,   0 }, { 142,   0 }, { 122,   0 }, { 101,   0 }, {  81,   0 }, {  61,   0 }, {  40,   0 }, {  20,   0 }, {   0,   0 },
+    { 223,  10 }, {   0,  10 }, { 223,  21 }, { 203,  21 }, { 183,  21 }, { 162,  21 }, { 142,  21 }, { 122,  21 }, { 101,  21 }, {  81,  21 }, {  61,  21 }, {  40,  21 },
+    {  20,  21 }, {   0,  21 }, { 223,  31 }, {   0,  31 }, { 223,  42 }, { 203,  42 }, { 183,  42 }, { 162,  42 }, { 142,  42 }, { 122,  42 }, { 101,  42 }, {  81,  42 },
+    {  61,  42 }, {  40,  42 }, {  20,  42 }, {   0,  42 }, { 223,  53 }, {   0,  53 }, { 223,  63 }, { 203,  63 }, { 183,  63 }, { 162,  63 }, { 142,  63 }, { 111,  63 },
+    {  81,  63 }, {  61,  63 }, {  40,  63 }, {  20,  63 }, {   0,  63 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 1
+} };
 
-    {{0|(11<<4)},   {20.36*11,  0}, 1},
-    {{0|(10<<4)},   {20.36*10,  0}, 1},
-    {{0|(9<<4)},    {20.36*9,  0}, 1},
-    {{0|(8<<4)},    {20.36*8,  0}, 1},
-    {{0|(7<<4)},    {20.36*7,  0}, 1},
-	{{0|(6<<4)},    { 20.36*6,  0}, 1},
-    {{0|(5<<4)},    { 20.36*5,  0}, 1},
-    {{0|(4<<4)},    { 20.36*4,  0}, 1},
-    {{0|(3<<4)},    { 20.36*3,  0}, 1},
-    {{0|(2<<4)},    { 20.36*2,  0}, 1},
-    {{0|(1<<4)},    { 20.36*1,  0}, 1},
-    {{0|(0<<4)},    { 20.36*0,  0}, 1},
-
-    {{0|(12<<4)},   {20.36*11, 21.33*0.5}, 1},
-    {{0|(13<<4)},  {20.36*0,21.33*0.5}, 1},
-
-    {{1|(11<<4)},   {20.36*11,  21.33}, 1},
-    {{1|(10<<4)},   {20.36*10,  21.33}, 4},
-    {{1|(9<<4)},    {20.36*9,  21.33}, 4},
-    {{1|(8<<4)},    {20.36*8,  21.33}, 4},
-    {{1|(7<<4)},    {20.36*7,  21.33}, 4},
-    {{1|(6<<4)},    { 20.36*6,  21.33}, 4},
-    {{1|(5<<4)},    { 20.36*5,  21.33}, 4},
-    {{1|(4<<4)},    { 20.36*4,  21.33}, 4},
-    {{1|(3<<4)},    { 20.36*3,  21.33}, 4},
-    {{1|(2<<4)},    { 20.36*2,  21.33}, 4},
-    {{1|(1<<4)},    { 20.36*1,  21.33}, 4},
-    {{1|(0<<4)},    { 20.36*0,  21.33}, 1},
-
-    {{1|(12<<4)},   {20.36*11, 21.33*1.5}, 1},
-    {{1|(13<<4)},  {20.36*0,21.33*1.5}, 1},
-
-    {{2|(11<<4)},   {20.36*11,  21.33*2}, 1},
-    {{2|(10<<4)},   {20.36*10,  21.33*2}, 4},
-    {{2|(9<<4)},    {20.36*9,  21.33*2}, 4},
-    {{2|(8<<4)},    {20.36*8,  21.33*2}, 4},
-    {{2|(7<<4)},    {20.36*7,  21.33*2}, 4},
-    {{2|(6<<4)},    { 20.36*6,  21.33*2}, 4},
-    {{2|(5<<4)},    { 20.36*5,  21.33*2}, 4},
-    {{2|(4<<4)},    { 20.36*4,  21.33*2}, 4},
-    {{2|(3<<4)},    { 20.36*3,  21.33*2}, 4},
-    {{2|(2<<4)},    { 20.36*2,  21.33*2}, 4},
-    {{2|(1<<4)},    { 20.36*1,  21.33*2}, 4},
-    {{2|(0<<4)},    { 20.36*0,  21.33*2}, 1},
-
-    {{2|(12<<4)},   {20.36*11, 21.33*2.5}, 1},
-    {{2|(13<<4)},  {20.36*0,21.33*2.5}, 1},
-
-    {{3|(11<<4)},   {20.36*11,  21.33*3}, 1},
-    {{3|(10<<4)},   {20.36*10,  21.33*3}, 1},
-    {{3|(9<<4)},    {20.36*9,  21.33*3}, 1},
-    {{3|(8<<4)},    {20.36*8,  21.33*3}, 1},
-    {{3|(7<<4)},    {20.36*7,  21.33*3}, 1},
-	{{3|(6<<4)},    { 20.36*5.5,  21.33*3}, 1},
-    {{3|(4<<4)},    { 20.36*4,  21.33*3}, 1},
-    {{3|(3<<4)},    { 20.36*3,  21.33*3}, 1},
-    {{3|(2<<4)},    { 20.36*2,  21.33*3}, 1},
-    {{3|(1<<4)},    { 20.36*1,  21.33*3}, 1},
-    {{3|(0<<4)},    { 20.36*0,  21.33*3}, 1}
-
-};
 #endif
 
-
 void matrix_init_kb(void) {
     matrix_init_user();
 }
-
-
 void matrix_scan_kb(void) {
     matrix_scan_user();
 }
-
-
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
     return process_record_user(keycode, record);
 }
-
-
 void suspend_power_down_kb(void)
 {
     rgb_matrix_set_suspend_state(true);
+    suspend_power_down_user();
 }
 
 void suspend_wakeup_init_kb(void)
 {
     rgb_matrix_set_suspend_state(false);
+    suspend_wakeup_init_user();
 }

keyboards/dztech/dz40rgb/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -31,11 +30,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 			),
 
 };
+
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
-  rgb_led led;
   for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-    led = g_rgb_leds[i];
-    if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
         rgb_matrix_set_color( i, red, green, blue );
     }
   }

keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -53,12 +52,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
 
-
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
-  rgb_led led;
   for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-    led = g_rgb_leds[i];
-    if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
         rgb_matrix_set_color( i, red, green, blue );
     }
   }

keyboards/dztech/dz40rgb/rules.mk

@@ -1,49 +1,6 @@
-# project specific files
-
-## chip/board settings
-#   the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-# Options to pass to dfu-util when flashing
+MCU  = STM32F303
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-
-# Build Options
-#   comment out to disable the options.
-#
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite            # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys

keyboards/dztech/dz60rgb/config.h

@@ -32,5 +32,11 @@
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
 #define DRIVER_COUNT 2
+#if defined (dzrgb60_ansi) || defined (dzrgb60_iso)
+#define DRIVER_1_LED_TOTAL 61
+#elif defined (dzrgb60_hhkb) || defined (dzrgb60_hhkb_iso)
+#define DRIVER_1_LED_TOTAL 62
+#else
 #define DRIVER_1_LED_TOTAL 63
+#endif
 #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/dz60rgb.c

@@ -65,69 +65,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-    {{0|(13<<4)},   {16*13.5,  0}, 1},
-    {{0|(12<<4)},   {16*12,  0}, 1},
-    {{0|(11<<4)},   {16*11,  0}, 1},
-    {{0|(10<<4)},   {16*10,  0}, 1},
-    {{0|(9<<4)},    {16*9,  0}, 1},
-    {{0|(8<<4)},    {16*8,  0}, 1},
-    {{0|(7<<4)},    {16*7,  0}, 1},
-	{{0|(6<<4)},    {16*6,  0}, 1},
-    {{0|(5<<4)},    {16*5,  0}, 1},
-    {{0|(4<<4)},    {16*4,  0}, 1},
-    {{0|(3<<4)},    {16*3,  0}, 1},
-    {{0|(2<<4)},    {16*2,  0}, 1},
-    {{0|(1<<4)},    {16*1,  0}, 1},
-    {{0|(0<<4)},    {16*0,  0}, 1},
-	{{2|(13<<4)},   {16*13.75, 24}, 1},
-    {{1|(12<<4)},   {16*12.5,  16}, 4},
-    {{1|(11<<4)},   {16*11.5,  16}, 4},
-    {{1|(10<<4)},   {16*10.5,  16}, 4},
-    {{1|(9<<4)},    { 16*9.5,  16}, 4},
-    {{1|(8<<4)},    { 16*8.5,  16}, 4},
-    {{1|(7<<4)},    { 16*7.5,  16}, 4},
-	{{1|(6<<4)},    { 16*6.5,  16}, 4},
-    {{1|(5<<4)},    { 16*5.5,  16}, 4},
-    {{1|(4<<4)},    { 16*4.5,  16}, 4},
-    {{1|(3<<4)},    { 16*3.5,  16}, 4},
-    {{1|(2<<4)},    { 16*2.5,  16}, 4},
-    {{1|(1<<4)},    { 16*1.5,  16}, 4},
-    {{1|(0<<4)},    { 16*0.25,  16}, 1},
-	{{1|(13<<4)},   {16*12.75,  32}, 1},
-    {{2|(11<<4)},   {16*11.75,  32}, 4},
-    {{2|(10<<4)},   {16*10.75,  32}, 4},
-    {{2|(9<<4)},    {16*9.75,  32}, 4},
-    {{2|(8<<4)},    {16*8.75,  32}, 4},
-    {{2|(7<<4)},    {16*7.75,  32}, 4},
-	{{2|(6<<4)},    { 16*6.75,  32}, 4},
-    {{2|(5<<4)},    { 16*5.75,  32}, 4},
-    {{2|(4<<4)},    { 16*4.75,  32}, 4},
-    {{2|(3<<4)},    { 16*3.75,  32}, 4},
-    {{2|(2<<4)},    { 16*2.75,  32}, 4},
-    {{2|(1<<4)},    { 16*1.75,  32}, 4},
-    {{2|(0<<4)},    { 16*0.375,  32}, 1},
-    {{3|(11<<4)},   {16*13.125,  48}, 1},
-    {{3|(10<<4)},   {16*11.25,  48}, 4},
-    {{3|(9<<4)},    {16*10.25,  48}, 4},
-    {{3|(8<<4)},    {16*9.25,  48}, 4},
-    {{3|(7<<4)},    {16*8.25,  48}, 4},
-	{{3|(6<<4)},    {16*7.25,  48}, 4},
-    {{3|(5<<4)},    {16*6.25,  48}, 4},
-    {{3|(4<<4)},    {16*5.25,  48}, 4},
-    {{3|(3<<4)},    {16*4.25,  48}, 4},
-    {{3|(2<<4)},    {16*3.25,  48}, 4},
-    {{3|(1<<4)},    {16*1.25,  48}, 4},
-    {{3|(0<<4)},    {16*0.625,  48}, 1},
-	{{4|(13<<4)},   {16*13.875,  64}, 1},
-    {{4|(11<<4)},   {16*12.625,  64}, 1},
-    {{4|(10<<4)},   {16*11.375,  64}, 1},
-    {{4|(9<<4)},    {16*10.125,  64}, 1},
-    {{4|(5<<4)},    { 16*6.375,  64}, 4},
-    {{4|(2<<4)},    { 16*2.625,  64}, 1},
-    {{4|(1<<4)},    { 16*1.375,  64}, 1},
-    {{4|(0<<4)},    { 16*0.125,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  28 },
+    {  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29, NO_LED,  14 },
+    {  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42,  41, NO_LED, NO_LED },
+    {  60,  59,  58, NO_LED, NO_LED,  57, NO_LED, NO_LED, NO_LED,  56,  55,  54, NO_LED,  53 }
+}, {
+    { 216,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 }, {   0,   0 },
+    { 220,  24 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 }, {   4,  16 },
+    { 204,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 }, { 210,  48 },
+    { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 222,  64 }, { 202,  64 }, { 182,  64 },
+    { 162,  64 }, { 102,  64 }, {  42,  64 }, {  22,  64 }, {   2,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1,
+    1, 4, 1, 1, 1
+} };
+
 #elif defined (dzrgb60_hhkb)
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 	{0, H_15,   G_15,   I_15},
@@ -194,70 +151,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-	{{2|(12<<4)},   {16*14,  0}, 1},
-    {{0|(13<<4)},   {16*13,  0}, 1},
-    {{0|(12<<4)},   {16*12,  0}, 1},
-    {{0|(11<<4)},   {16*11,  0}, 1},
-    {{0|(10<<4)},   {16*10,  0}, 1},
-    {{0|(9<<4)},    {16*9,  0}, 1},
-    {{0|(8<<4)},    {16*8,  0}, 1},
-    {{0|(7<<4)},    {16*7,  0}, 1},
-	{{0|(6<<4)},    {16*6,  0}, 1},
-    {{0|(5<<4)},    {16*5,  0}, 1},
-    {{0|(4<<4)},    {16*4,  0}, 1},
-    {{0|(3<<4)},    {16*3,  0}, 1},
-    {{0|(2<<4)},    {16*2,  0}, 1},
-    {{0|(1<<4)},    {16*1,  0}, 1},
-    {{0|(0<<4)},    {16*0,  0}, 1},
-	{{1|(13<<4)},   {16*13.75, 16}, 1},
-    {{1|(12<<4)},   {16*12.5,  16}, 4},
-    {{1|(11<<4)},   {16*11.5,  16}, 4},
-    {{1|(10<<4)},   {16*10.5,  16}, 4},
-    {{1|(9<<4)},    { 16*9.5,  16}, 4},
-    {{1|(8<<4)},    { 16*8.5,  16}, 4},
-    {{1|(7<<4)},    { 16*7.5,  16}, 4},
-	{{1|(6<<4)},    { 16*6.5,  16}, 4},
-    {{1|(5<<4)},    { 16*5.5,  16}, 4},
-    {{1|(4<<4)},    { 16*4.5,  16}, 4},
-    {{1|(3<<4)},    { 16*3.5,  16}, 4},
-    {{1|(2<<4)},    { 16*2.5,  16}, 4},
-    {{1|(1<<4)},    { 16*1.5,  16}, 4},
-    {{1|(0<<4)},    { 16*0.25,  16}, 1},
-	{{2|(13<<4)},   {16*12.75,  32}, 1},
-    {{2|(11<<4)},   {16*11.75,  32}, 4},
-    {{2|(10<<4)},   {16*10.75,  32}, 4},
-    {{2|(9<<4)},    {16*9.75,  32}, 4},
-    {{2|(8<<4)},    {16*8.75,  32}, 4},
-    {{2|(7<<4)},    {16*7.75,  32}, 4},
-	{{2|(6<<4)},    { 16*6.75,  32}, 4},
-    {{2|(5<<4)},    { 16*5.75,  32}, 4},
-    {{2|(4<<4)},    { 16*4.75,  32}, 4},
-    {{2|(3<<4)},    { 16*3.75,  32}, 4},
-    {{2|(2<<4)},    { 16*2.75,  32}, 4},
-    {{2|(1<<4)},    { 16*1.75,  32}, 4},
-    {{2|(0<<4)},    { 16*0.375,  32}, 1},
-    {{3|(13<<4)},   {16*14,     48}, 1},
-    {{3|(11<<4)},   {16*12.625, 48}, 4},
-    {{3|(10<<4)},   {16*11.25,  48}, 4},
-    {{3|(9<<4)},    {16*10.25,  48}, 4},
-    {{3|(8<<4)},    {16*9.25,  48}, 4},
-    {{3|(7<<4)},    {16*8.25,  48}, 4},
-	{{3|(6<<4)},    {16*7.25,  48}, 4},
-    {{3|(5<<4)},    {16*6.25,  48}, 4},
-    {{3|(4<<4)},    {16*5.25,  48}, 4},
-    {{3|(3<<4)},    {16*4.25,  48}, 4},
-    {{3|(2<<4)},    {16*3.25,  48}, 4},
-    {{3|(1<<4)},    {16*1.25,  48}, 4},
-    {{3|(0<<4)},    {16*0.625,  48}, 1},
-	{{4|(13<<4)},   {16*13.625,  64}, 1},
-    {{4|(11<<4)},   {16*12.375,  64}, 1},
-    {{4|(10<<4)},   {16*11.125,  64}, 1},
-    {{4|(5<<4)},    { 16*7,      64}, 4},
-    {{4|(2<<4)},    { 16*2.875,  64}, 1},
-    {{4|(1<<4)},    { 16*1.625,  64}, 1},
-    {{4|(0<<4)},    { 16*0.375,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  14,  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1 },
+    {  28,  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15 },
+    {  41,  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,   0,  29 },
+    {  54,  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43, NO_LED,  42 },
+    {  61,  60,  59, NO_LED, NO_LED,  58, NO_LED, NO_LED, NO_LED, NO_LED,  57,  56, NO_LED,  55 }
+}, {
+    { 224,   0 }, { 208,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 },
+    {   0,   0 }, { 220,  16 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 },
+    {   4,  16 }, { 204,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 },
+    { 224,  48 }, { 202,  48 }, { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 218,  64 },
+    { 198,  64 }, { 178,  64 }, { 112,  64 }, {  46,  64 }, {  26,  64 }, {   6,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    1, 1, 4, 1, 1, 1
+} };
+
 #elif defined (dzrgb60_hhkb_iso)
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 	{0, H_15,   G_15,   I_15},
@@ -324,70 +237,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-	{{2|(12<<4)},   {16*14,  0}, 1},
-    {{0|(13<<4)},   {16*13,  0}, 1},
-    {{0|(12<<4)},   {16*12,  0}, 1},
-    {{0|(11<<4)},   {16*11,  0}, 1},
-    {{0|(10<<4)},   {16*10,  0}, 1},
-    {{0|(9<<4)},    {16*9,  0}, 1},
-    {{0|(8<<4)},    {16*8,  0}, 1},
-    {{0|(7<<4)},    {16*7,  0}, 1},
-	{{0|(6<<4)},    {16*6,  0}, 1},
-    {{0|(5<<4)},    {16*5,  0}, 1},
-    {{0|(4<<4)},    {16*4,  0}, 1},
-    {{0|(3<<4)},    {16*3,  0}, 1},
-    {{0|(2<<4)},    {16*2,  0}, 1},
-    {{0|(1<<4)},    {16*1,  0}, 1},
-    {{0|(0<<4)},    {16*0,  0}, 1},
-	{{2|(13<<4)},   {16*13.75, 24}, 1},
-    {{1|(12<<4)},   {16*12.5,  16}, 4},
-    {{1|(11<<4)},   {16*11.5,  16}, 4},
-    {{1|(10<<4)},   {16*10.5,  16}, 4},
-    {{1|(9<<4)},    { 16*9.5,  16}, 4},
-    {{1|(8<<4)},    { 16*8.5,  16}, 4},
-    {{1|(7<<4)},    { 16*7.5,  16}, 4},
-	{{1|(6<<4)},    { 16*6.5,  16}, 4},
-    {{1|(5<<4)},    { 16*5.5,  16}, 4},
-    {{1|(4<<4)},    { 16*4.5,  16}, 4},
-    {{1|(3<<4)},    { 16*3.5,  16}, 4},
-    {{1|(2<<4)},    { 16*2.5,  16}, 4},
-    {{1|(1<<4)},    { 16*1.5,  16}, 4},
-    {{1|(0<<4)},    { 16*0.25,  16}, 1},
-	{{1|(13<<4)},   {16*12.75,  32}, 1},
-    {{2|(11<<4)},   {16*11.75,  32}, 4},
-    {{2|(10<<4)},   {16*10.75,  32}, 4},
-    {{2|(9<<4)},    {16*9.75,  32}, 4},
-    {{2|(8<<4)},    {16*8.75,  32}, 4},
-    {{2|(7<<4)},    {16*7.75,  32}, 4},
-	{{2|(6<<4)},    { 16*6.75,  32}, 4},
-    {{2|(5<<4)},    { 16*5.75,  32}, 4},
-    {{2|(4<<4)},    { 16*4.75,  32}, 4},
-    {{2|(3<<4)},    { 16*3.75,  32}, 4},
-    {{2|(2<<4)},    { 16*2.75,  32}, 4},
-    {{2|(1<<4)},    { 16*1.75,  32}, 4},
-    {{2|(0<<4)},    { 16*0.375,  32}, 1},
-    {{3|(13<<4)},   {16*14,     48}, 1},
-    {{3|(11<<4)},   {16*12.625, 48}, 4},
-    {{3|(10<<4)},   {16*11.25,  48}, 4},
-    {{3|(9<<4)},    {16*10.25,  48}, 4},
-    {{3|(8<<4)},    {16*9.25,  48}, 4},
-    {{3|(7<<4)},    {16*8.25,  48}, 4},
-	{{3|(6<<4)},    {16*7.25,  48}, 4},
-    {{3|(5<<4)},    {16*6.25,  48}, 4},
-    {{3|(4<<4)},    {16*5.25,  48}, 4},
-    {{3|(3<<4)},    {16*4.25,  48}, 4},
-    {{3|(2<<4)},    {16*3.25,  48}, 4},
-    {{3|(1<<4)},    {16*1.25,  48}, 4},
-    {{3|(0<<4)},    {16*0.625,  48}, 1},
-	{{4|(13<<4)},   {16*13.625,  64}, 1},
-    {{4|(11<<4)},   {16*12.375,  64}, 1},
-    {{4|(10<<4)},   {16*11.125,  64}, 1},
-    {{4|(5<<4)},    { 16*7,      64}, 4},
-    {{4|(2<<4)},    { 16*2.875,  64}, 1},
-    {{4|(1<<4)},    { 16*1.625,  64}, 1},
-    {{4|(0<<4)},    { 16*0.375,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  14,  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1 },
+    {  28,  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  29 },
+    {  41,  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,   0,  15 },
+    {  54,  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43, NO_LED,  42 },
+    {  61,  60,  59, NO_LED, NO_LED,  58, NO_LED, NO_LED, NO_LED, NO_LED,  57,  56, NO_LED,  55 }
+}, {
+    { 224,   0 }, { 208,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 },
+    {   0,   0 }, { 220,  24 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 },
+    {   4,  16 }, { 204,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 },
+    { 224,  48 }, { 202,  48 }, { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 218,  64 },
+    { 198,  64 }, { 178,  64 }, { 112,  64 }, {  46,  64 }, {  26,  64 }, {   6,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    1, 1, 4, 1, 1, 1
+} };
+
 #elif defined (dzrgb60_ansi)
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_14,   J_14,   L_14},
@@ -453,69 +322,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-    {{0|(13<<4)},   {16*13.5,  0}, 1},
-    {{0|(12<<4)},   {16*12,  0}, 1},
-    {{0|(11<<4)},   {16*11,  0}, 1},
-    {{0|(10<<4)},   {16*10,  0}, 1},
-    {{0|(9<<4)},    {16*9,  0}, 1},
-    {{0|(8<<4)},    {16*8,  0}, 1},
-    {{0|(7<<4)},    {16*7,  0}, 1},
-	{{0|(6<<4)},    {16*6,  0}, 1},
-    {{0|(5<<4)},    {16*5,  0}, 1},
-    {{0|(4<<4)},    {16*4,  0}, 1},
-    {{0|(3<<4)},    {16*3,  0}, 1},
-    {{0|(2<<4)},    {16*2,  0}, 1},
-    {{0|(1<<4)},    {16*1,  0}, 1},
-    {{0|(0<<4)},    {16*0,  0}, 1},
-	{{1|(13<<4)},   {16*13.75, 16}, 1},
-    {{1|(12<<4)},   {16*12.5,  16}, 4},
-    {{1|(11<<4)},   {16*11.5,  16}, 4},
-    {{1|(10<<4)},   {16*10.5,  16}, 4},
-    {{1|(9<<4)},    { 16*9.5,  16}, 4},
-    {{1|(8<<4)},    { 16*8.5,  16}, 4},
-    {{1|(7<<4)},    { 16*7.5,  16}, 4},
-	{{1|(6<<4)},    { 16*6.5,  16}, 4},
-    {{1|(5<<4)},    { 16*5.5,  16}, 4},
-    {{1|(4<<4)},    { 16*4.5,  16}, 4},
-    {{1|(3<<4)},    { 16*3.5,  16}, 4},
-    {{1|(2<<4)},    { 16*2.5,  16}, 4},
-    {{1|(1<<4)},    { 16*1.5,  16}, 4},
-    {{1|(0<<4)},    { 16*0.25,  16}, 1},
-	{{2|(13<<4)},   {16*13.375,  24}, 1},
-    {{2|(11<<4)},   {16*11.75,  32}, 4},
-    {{2|(10<<4)},   {16*10.75,  32}, 4},
-    {{2|(9<<4)},    {16*9.75,  32}, 4},
-    {{2|(8<<4)},    {16*8.75,  32}, 4},
-    {{2|(7<<4)},    {16*7.75,  32}, 4},
-	{{2|(6<<4)},    { 16*6.75,  32}, 4},
-    {{2|(5<<4)},    { 16*5.75,  32}, 4},
-    {{2|(4<<4)},    { 16*4.75,  32}, 4},
-    {{2|(3<<4)},    { 16*3.75,  32}, 4},
-    {{2|(2<<4)},    { 16*2.75,  32}, 4},
-    {{2|(1<<4)},    { 16*1.75,  32}, 4},
-    {{2|(0<<4)},    { 16*0.375,  32}, 1},
-    {{3|(11<<4)},   {16*13.125,  48}, 1},
-    {{3|(10<<4)},   {16*11.25,  48}, 4},
-    {{3|(9<<4)},    {16*10.25,  48}, 4},
-    {{3|(8<<4)},    {16*9.25,  48}, 4},
-    {{3|(7<<4)},    {16*8.25,  48}, 4},
-	{{3|(6<<4)},    {16*7.25,  48}, 4},
-    {{3|(5<<4)},    {16*6.25,  48}, 4},
-    {{3|(4<<4)},    {16*5.25,  48}, 4},
-    {{3|(3<<4)},    {16*4.25,  48}, 4},
-    {{3|(2<<4)},    {16*3.25,  48}, 4},
-    {{3|(1<<4)},    {16*1.25,  48}, 4},
-    {{3|(0<<4)},    {16*0.625,  48}, 1},
-	{{4|(13<<4)},   {16*13.875,  64}, 1},
-    {{4|(11<<4)},   {16*12.625,  64}, 1},
-    {{4|(10<<4)},   {16*11.375,  64}, 1},
-    {{4|(9<<4)},    {16*10.125,  64}, 1},
-    {{4|(5<<4)},    { 16*6.375,  64}, 4},
-    {{4|(2<<4)},    { 16*2.625,  64}, 1},
-    {{4|(1<<4)},    { 16*1.375,  64}, 1},
-    {{4|(0<<4)},    { 16*0.125,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29, NO_LED,  28 },
+    {  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42,  41, NO_LED, NO_LED },
+    {  60,  59,  58, NO_LED, NO_LED,  57, NO_LED, NO_LED, NO_LED,  56,  55,  54, NO_LED,  53 }
+}, {
+    { 216,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 }, {   0,   0 },
+    { 220,  16 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 }, {   4,  16 },
+    { 214,  24 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 }, { 210,  48 },
+    { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 222,  64 }, { 202,  64 }, { 182,  64 },
+    { 162,  64 }, { 102,  64 }, {  42,  64 }, {  22,  64 }, {   2,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1,
+    1, 4, 1, 1, 1
+} };
+
 #else
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_14,   J_14,   L_14},
@@ -583,71 +409,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-    {{0|(13<<4)},   {17.23*13,  0}, 1},
-    {{0|(12<<4)},   {17.23*12,  0}, 1},
-    {{0|(11<<4)},   {17.23*11,  0}, 1},
-    {{0|(10<<4)},   {17.23*10,  0}, 1},
-    {{0|(9<<4)},    {17.23*9,  0}, 1},
-    {{0|(8<<4)},    {17.23*8,  0}, 1},
-    {{0|(7<<4)},    {17.23*7,  0}, 1},
-	{{0|(6<<4)},    { 17.23*6,  0}, 1},
-    {{0|(5<<4)},    { 17.23*5,  0}, 1},
-    {{0|(4<<4)},    { 17.23*4,  0}, 1},
-    {{0|(3<<4)},    { 17.23*3,  0}, 1},
-    {{0|(2<<4)},    { 17.23*2,  0}, 1},
-    {{0|(1<<4)},    { 17.23*1,  0}, 1},
-    {{0|(0<<4)},    { 17.23*0,  0}, 1},
-	{{1|(13<<4)},   {17.23*13,  16}, 1},
-    {{1|(12<<4)},   {17.23*12,  16}, 4},
-    {{1|(11<<4)},   {17.23*11,  16}, 4},
-    {{1|(10<<4)},   {17.23*10,  16}, 4},
-    {{1|(9<<4)},    {17.23*9,  16}, 4},
-    {{1|(8<<4)},    {17.23*8,  16}, 4},
-    {{1|(7<<4)},    {17.23*7,  16}, 4},
-	{{1|(6<<4)},    { 17.23*6,  16}, 4},
-    {{1|(5<<4)},    { 17.23*5,  16}, 4},
-    {{1|(4<<4)},    { 17.23*4,  16}, 4},
-    {{1|(3<<4)},    { 17.23*3,  16}, 4},
-    {{1|(2<<4)},    { 17.23*2,  16}, 4},
-    {{1|(1<<4)},    { 17.23*1,  16}, 4},
-    {{1|(0<<4)},    { 17.23*0,  16}, 1},
-	{{2|(13<<4)},   {17.23*13,  32}, 1},
-    {{2|(11<<4)},   {17.23*11,  32}, 4},
-    {{2|(10<<4)},   {17.23*10,  32}, 4},
-    {{2|(9<<4)},    {17.23*9,  32}, 4},
-    {{2|(8<<4)},    {17.23*8,  32}, 4},
-    {{2|(7<<4)},    {17.23*7,  32}, 4},
-	{{2|(6<<4)},    { 17.23*6,  32}, 4},
-    {{2|(5<<4)},    { 17.23*5,  32}, 4},
-    {{2|(4<<4)},    { 17.23*4,  32}, 4},
-    {{2|(3<<4)},    { 17.23*3,  32}, 4},
-    {{2|(2<<4)},    { 17.23*2,  32}, 4},
-    {{2|(1<<4)},    { 17.23*1,  32}, 4},
-    {{2|(0<<4)},    { 17.23*0,  32}, 1},
-	{{3|(13<<4)},   {17.23*13,  48}, 1},
-    {{3|(11<<4)},   {17.23*11,  48}, 4},
-    {{3|(10<<4)},   {17.23*10,  48}, 4},
-    {{3|(9<<4)},    {17.23*9,  48}, 4},
-    {{3|(8<<4)},    {17.23*8,  48}, 4},
-    {{3|(7<<4)},    {17.23*7,  48}, 4},
-	{{3|(6<<4)},    { 17.23*6,  48}, 4},
-    {{3|(5<<4)},    { 17.23*5,  48}, 4},
-    {{3|(4<<4)},    { 17.23*4,  48}, 4},
-    {{3|(3<<4)},    { 17.23*3,  48}, 4},
-    {{3|(2<<4)},    { 17.23*2,  48}, 4},
-    {{3|(1<<4)},    { 17.23*1,  48}, 4},
-    {{3|(0<<4)},    { 17.23*0,  48}, 1},
-	{{4|(13<<4)},   {17.23*13,  64}, 1},
-    {{4|(11<<4)},   {17.23*11,  64}, 1},
-    {{4|(10<<4)},   {17.23*10,  64}, 1},
-    {{4|(9<<4)},    {17.23*9,  64}, 1},
-    {{4|(8<<4)},    {17.23*8,  64}, 1},
-    {{4|(5<<4)},    { 17.23*5,  64}, 4},
-    {{4|(2<<4)},    { 17.23*2,  64}, 1},
-    {{4|(1<<4)},    { 17.23*1,  64}, 1},
-    {{4|(0<<4)},    { 17.23*0,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29, NO_LED,  28 },
+    {  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42, NO_LED,  41 },
+    {  62,  61,  60, NO_LED, NO_LED,  59, NO_LED, NO_LED,  58,  57,  56,  55, NO_LED,  54 }
+}, {
+    { 223,   0 }, { 206,   0 }, { 189,   0 }, { 172,   0 }, { 155,   0 }, { 137,   0 }, { 120,   0 }, { 103,   0 }, {  86,   0 }, {  68,   0 }, {  51,   0 }, {  34,   0 }, {  17,   0 }, {   0,   0 },
+    { 223,  16 }, { 206,  16 }, { 189,  16 }, { 172,  16 }, { 155,  16 }, { 137,  16 }, { 120,  16 }, { 103,  16 }, {  86,  16 }, {  68,  16 }, {  51,  16 }, {  34,  16 }, {  17,  16 }, {   0,  16 },
+    { 223,  32 }, { 189,  32 }, { 172,  32 }, { 155,  32 }, { 137,  32 }, { 120,  32 }, { 103,  32 }, {  86,  32 }, {  68,  32 }, {  51,  32 }, {  34,  32 }, {  17,  32 }, {   0,  32 }, { 223,  48 },
+    { 189,  48 }, { 172,  48 }, { 155,  48 }, { 137,  48 }, { 120,  48 }, { 103,  48 }, {  86,  48 }, {  68,  48 }, {  51,  48 }, {  34,  48 }, {  17,  48 }, {   0,  48 }, { 223,  64 }, { 189,  64 },
+    { 172,  64 }, { 155,  64 }, { 137,  64 }, {  86,  64 }, {  34,  64 }, {  17,  64 }, {   0,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
+    1, 1, 1, 4, 1, 1, 1
+} };
+
 #endif
 
 void matrix_init_kb(void) {

keyboards/dztech/dz60rgb/keymaps/ansi/config.h

@@ -1,6 +1,2 @@
 #pragma once
 #define dzrgb60_ansi
-#undef DRIVER_1_LED_TOTAL
-#undef DRIVER_LED_TOTAL
-#define DRIVER_1_LED_TOTAL 61
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -39,10 +38,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		};
 
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
-  rgb_led led;
   for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-    led = g_rgb_leds[i];
-    if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
         rgb_matrix_set_color( i, red, green, blue );
     }
   }

keyboards/dztech/dz60rgb/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2