Extend allowed range of tappable keycodes to include modifiers (#5809)

* Extend allowed range of tappable keycodes to include modifiers

* Get rid of the magic numbers altogether

* Remove some more magic numbers

* Extract LM() functionality from ACT_LAYER_TAP

* Use ACTION() macro everywhere

Vagrantfile

@@ -52,26 +52,37 @@ Vagrant.configure(2) do |config|
   end
 
   # Docker provider pulls from hub.docker.com respecting docker.image if
-  # config.vm.box is nil. Note that this bind-mounts from the current dir to
+  # config.vm.box is nil. In this case, we adhoc build util/vagrant/Dockerfile.
+  # Note that this bind-mounts from the current dir to
   # /vagrant in the guest, so unless your UID is 1000 to match vagrant in the
   # image, you'll need to: chmod -R a+rw .
   config.vm.provider "docker" do |docker, override|
     override.vm.box = nil
-    docker.image = "jesselang/debian-vagrant:stretch"
+    docker.build_dir = "util/vagrant"
     docker.has_ssh = true
   end
 
-  # This script ensures the required packages for AVR programming are installed
-  # It also ensures the system always gets the latest updates when powered on
-  # If this causes issues you can run a 'vagrant destroy' and then
-  # add a # before ,run: (or change "always" to "once") and run 'vagrant up' to get a working
-  # non-updated box and then attempt to troubleshoot or open a Github issue
-  config.vm.provision "shell", inline: "/vagrant/util/qmk_install.sh", run: "always"
+  # Unless we are running the docker container directly
+  #   1. run container detached on vm
+  #   2. attach on 'vagrant ssh'
+  ["virtualbox", "vmware_workstation", "vmware_fusion"].each do |type|
+    config.vm.provider type do |virt, override|
+      override.vm.provision "docker" do |d|
+        d.run "qmkfm/base_container",
+          cmd: "tail -f /dev/null",
+          args: "--privileged -v /dev:/dev -v '/vagrant:/vagrant'"
+      end
+
+      override.vm.provision "shell", inline: <<-SHELL
+        echo 'docker restart qmkfm-base_container && exec docker exec -it qmkfm-base_container /bin/bash -l' >> ~vagrant/.bashrc
+      SHELL
+    end
+  end
 
   config.vm.post_up_message = <<-EOT
 
-  Log into the VM using 'vagrant ssh'. QMK directory synchronized with host is
-  located at /vagrant
+  Log into the environment using 'vagrant ssh'. QMK directory synchronized with
+  host is located at /vagrant
   To compile the .hex files use make command inside this directory, e.g.
      cd /vagrant
      make <keyboard>:default

bin/qmk

@@ -38,7 +38,7 @@ with open('requirements.txt', 'r') as fd:
 
 # Figure out our version
 command = ['git', 'describe', '--abbrev=6', '--dirty', '--always', '--tags']
-result = subprocess.run(command, text=True, capture_output=True)
+result = subprocess.run(command, universal_newlines=True, capture_output=True)
 
 if result.returncode == 0:
     os.environ['QMK_VERSION'] = 'QMK ' + result.stdout.strip()

docs/config_options.md

@@ -76,7 +76,7 @@ This is a C header file that is one of the first things included, and will persi
 * `#define B7_AUDIO`
   * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define BACKLIGHT_PIN B7`
-  * pin of the backlight - `B5`, `B6`, `B7` and `C6` (and `D4` on ATmega32A) use hardware PWM, others use software implementation
+  * pin of the backlight
 * `#define BACKLIGHT_LEVELS 3`
   * number of levels your backlight will have (maximum 15 excluding off)
 * `#define BACKLIGHT_BREATHING`
@@ -89,7 +89,7 @@ This is a C header file that is one of the first things included, and will persi
   * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 * `#define LOCKING_RESYNC_ENABLE`
   * tries to keep switch state consistent with keyboard LED state
-* `#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))`
+* `#define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)`
   * key combination that allows the use of magic commands (useful for debugging)
 * `#define USB_MAX_POWER_CONSUMPTION`
   * sets the maximum power (in mA) over USB for the device (default: 500)
@@ -171,8 +171,8 @@ If you define these options you will enable the associated feature, which may in
   * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
 * `#define TAP_CODE_DELAY 100`
   * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
-* `#define TAP_HOLD_CAPS_DELAY 200`
-  * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPSLOCK` keycode, as this has some special handling on MacOS.  The value is in milliseconds, and defaults to 200ms if not defined. 
+* `#define TAP_HOLD_CAPS_DELAY 80`
+  * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPSLOCK` keycode, as this has some special handling on MacOS.  The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher.
 
 ## RGB Light Configuration
 
@@ -248,6 +248,9 @@ There are a few different ways to set handedness for split keyboards (listed in
 * `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
   * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.
 
+* `#define DIRECT_PINS_RIGHT { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }`
+  * If you want to specify a different direct pinout for the right half than the left half, you can define `DIRECT_PINS_RIGHT`. Currently, the size of `DIRECT_PINS` must be the same as `DIRECT_PINS_RIGHT`.
+
 * `#define RGBLED_SPLIT { 6, 6 }`
   * See [RGB Light Configuration](#rgb-light-configuration)
 

docs/faq_build.md

@@ -19,7 +19,11 @@ Note that running `make` with `sudo` is generally ***not*** a good idea, and you
 
 ### Linux `udev` Rules
 On Linux, you'll need proper privileges to access the MCU. You can either use
-`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
+`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following:
+```console
+sudo udevadm control --reload-rules
+sudo udevadm trigger
+```
 
 **/etc/udev/rules.d/50-atmel-dfu.rules:**
 ```
@@ -43,21 +47,41 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
 ```
 
+**/etc/udev/rules.d/55-catalina.rules:**
+```
+# ModemManager should ignore the following devices
+ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"
+ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"
+```
+
+**Note:** ModemManager filtering only works when not in strict mode, the following commands can update that settings:
+```console
+sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service
+sudo systemctl daemon-reload
+sudo systemctl restart ModemManager
+```
+
+**/etc/udev/rules.d/56-dfu-util.rules:**
+```
+# stm32duino
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", MODE:="0666"
+# Generic stm32
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"
+```
+
 ### Serial device is not detected in bootloader mode on Linux
 Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
 Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
 
 ## Unknown Device for DFU Bootloader
 
-If you're using Windows to flash your keyboard, and you are running into issues, check the Device Manager.  If you see an "Unknown Device" when the keyboard is in "bootloader mode", then you may have a driver issue.
+Issues encountered when flashing keyboards on Windows are most often due to having the wrong drivers installed for the bootloader. 
 
-Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue.
+Re-running the installation script for MSYS2 may help (eg run `util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue. Alternatively, you can download and run the [`qmk_driver_installer`](https://github.com/qmk/qmk_driver_installer) package.
 
-If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUSB` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again.  If that doesn't work, try all of the options, until one works. 
+If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, and run it on the system.  Then, you will need to reset your board into bootloader mode.  After that, locate the device in question. If the device doesn't show up in the list (or nothing shows up in the list), you may need to enable the `List all devices` option in the `Options` menu.
 
-?> There isn't a best option for which driver should be used here.  Some options work better on some systems than others.  libUSB and WinUSB seem to be the best options here.
-
-If the bootloader doesn't show up in the list for devices, you may need to enable the "List all devices" option in the `Options` menu, and then find the bootloader in question. 
+From here, you will need to know what type of controller the board is using.  You may see it listed in the Device Manager as `ATmega32U4` device (which is an AVR board), or an `STM32` device (Which is an ARM board).  For AVR boards, use `libusb-win32` for the driver. For ARM boards, use the `WinUSB` driver.  Once the correct driver type has been selected, click on the `Replace Driver` button, unplug your board, plug it back in, and reset it again.
 
 
 ## WINAVR is Obsolete

docs/feature_backlight.md

@@ -30,32 +30,31 @@ You should then be able to use the keycodes below to change the backlight level.
 
 This feature is distinct from both the [RGB underglow](feature_rgblight.md) and [RGB matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously use multiple different coloured LEDs on a keyboard.
 
-Hardware PWM is only supported on certain pins of the MCU, so if the backlighting is not connected to one of them, a software PWM implementation triggered by hardware timer interrupts will be used.
-
 Hardware PWM is supported according to the following table:
 
-| Backlight Pin | Hardware timer          |
-|---------------|-------------------------|
-|`B5`           | Timer 1                 |
-|`B6`           | Timer 1                 |
-|`B7`           | Timer 1                 |
-|`C6`           | Timer 3                 |
-|`D4`           | Timer 1 (ATmega32A only)|
-| other         | Software PWM            |
+|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|
+|-------------|-------------|-------------|-------------|---------|
+|`B5`         |Timer 1      |Timer 1      |             |         |
+|`B6`         |Timer 1      |Timer 1      |             |         |
+|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |
+|`C4`         |Timer 3      |             |             |         |
+|`C5`         |Timer 3      |             |Timer 1      |         |
+|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |
+|`D4`         |             |             |             |Timer 1  |
+|`D5`         |             |             |             |Timer 1  |
 
-The [audio feature](feature_audio.md) also uses hardware timers. Please refer to the following table to know what hardware timer the software PWM will use depending on the audio configuration:
+All other pins will use software PWM. If the [Audio](feature_audio.md) feature is disabled or only using one timer, the backlight PWM can be triggered by a hardware timer:
 
-| Audio Pin(s) | Audio Timer | Software PWM Timer |
-|--------------|-------------|--------------------|
-| `C4`         | Timer 3     | Timer 1            |
-| `C5`         | Timer 3     | Timer 1            |
-| `C6`         | Timer 3     | Timer 1            |
-| `B5`         | Timer 1     | Timer 3            |
-| `B6`         | Timer 1     | Timer 3            |
-| `B7`         | Timer 1     | Timer 3            |
-| `Bx` & `Cx`  | Timer 1 & 3 | None               |
+|Audio Pin|Audio Timer|Software PWM Timer|
+|---------|-----------|------------------|
+|`C4`     |Timer 3    |Timer 1           |
+|`C5`     |Timer 3    |Timer 1           |
+|`C6`     |Timer 3    |Timer 1           |
+|`B5`     |Timer 1    |Timer 3           |
+|`B6`     |Timer 1    |Timer 3           |
+|`B7`     |Timer 1    |Timer 3           |
 
-When all timers are in use for [audio](feature_audio.md), the backlight software PWM will not use a hardware timer, but instead will be triggered during the matrix scan. In this case the backlight doesn't support breathing and might show lighting artifacts (for instance flickering), because the PWM computation might not be called with enough timing precision.
+When both timers are in use for Audio, the backlight PWM will not use a hardware timer, but will instead be triggered during the matrix scan. In this case, breathing is not supported, and the backlight might flicker, because the PWM computation may not be called with enough timing precision.
 
 ## Configuration
 
@@ -65,7 +64,7 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
 |---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
 |`BACKLIGHT_PIN`      |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
 |`BACKLIGHT_PINS`     |*Not defined*|experimental: see below for more information                                                                 |
-|`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 15 excluding off)                                                   |
+|`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 31 excluding off)                                                   |
 |`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                             |
 |`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported                                                                     |
 |`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
@@ -73,8 +72,10 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
 
 ## Backlight On State
 
-Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *low*.
-Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case you must `#define BACKLIGHT_ON_STATE 1`, so that when the transistor is on, the pin is driven *high* instead.
+Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *high*.
+Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case, when the transistor is on, the pin is driven *low* instead.
+
+This functionality is configured at the keyboard level with the `BACKLIGHT_ON_STATE` define.
 
 ## Multiple backlight pins
 

docs/feature_combo.md

@@ -2,7 +2,7 @@
 
 The Combo feature is a chording type solution for adding custom actions.  It lets you hit multiple keys at once and produce a different effect.  For instance, hitting `A` and `S` within the tapping term would hit `ESC` instead, or have it perform even more complex tasks.
 
-To enable this feature, yu need to add `COMBO_ENABLE = yes` to your `rules.mk`.
+To enable this feature, you need to add `COMBO_ENABLE = yes` to your `rules.mk`.
 
 Additionally, in your `config.h`, you'll need to specify the number of combos that you'll be using, by adding `#define COMBO_COUNT 1` (replacing 1 with the number that you're using).
 <!-- At this time, this is necessary -->
@@ -59,19 +59,12 @@ void process_combo_event(uint8_t combo_index, bool pressed) {
   switch(combo_index) {
     case ZC_COPY:
       if (pressed) {
-        register_code(KC_LCTL);
-        register_code(KC_C);
-        unregister_code(KC_C);
-        unregister_code(KC_LCTL);
+        tap_code16(LCTL(KC_C));
       }
       break;
-
     case XV_PASTE:
       if (pressed) {
-        register_code(KC_LCTL);
-        register_code(KC_V);
-        unregister_code(KC_V);
-        unregister_code(KC_LCTL);
+        tap_code16(LCTL(KC_V));
       }
       break;
   }
@@ -87,3 +80,24 @@ If you're using long combos, or even longer combos, you may run into issues with
 In this case, you can add either `#define EXTRA_LONG_COMBOS` or `#define EXTRA_EXTRA_LONG_COMBOS` in your `config.h` file.
 
 You may also be able to enable action keys by defining `COMBO_ALLOW_ACTION_KEYS`.
+
+## Keycodes 
+
+You can enable, disable and toggle the Combo feature on the fly.  This is useful if you need to disable them temporarily, such as for a game. 
+
+|Keycode   |Description                      |
+|----------|---------------------------------|
+|`CMB_ON`  |Turns on Combo feature           |
+|`CMB_OFF` |Turns off Combo feature          |
+|`CMB_TOG` |Toggles Combo feature on and off |
+
+## User callbacks
+
+In addition to the keycodes, there are a few functions that you can use to set the status, or check it:
+
+|Function   |Description                                                         |
+|-----------|--------------------------------------------------------------------|
+| `combo_enable()`     | Enables the combo feature                               |
+| `combo_disable()`    | Disables the combo feature, and clears the combo buffer |
+| `combo_toggle()`     | Toggles the state of the combo feature                  |
+| `is_combo_enabled()` | Returns the status of the combo feature state (true or false) |

docs/feature_command.md

@@ -16,36 +16,36 @@ To use Command, hold down the key combination defined by the `IS_COMMAND()` macr
 
 If you would like to change the key assignments for Command, `#define` these in your `config.h` at either the keyboard or keymap level. All keycode assignments here must omit the `KC_` prefix.
 
-|Define                              |Default                                                                    |Description                                     |
-|------------------------------------|---------------------------------------------------------------------------|------------------------------------------------|
-|`IS_COMMAND()`                      |<code>(get_mods() == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                     |Set default layer with the Function row         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                     |Set default layer with the number keys          |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                    |Set default layer with `MAGIC_KEY_LAYER0..9`    |
-|`MAGIC_KEY_DEBUG`                   |`D`                                                                        |Toggle debugging over serial                    |
-|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                        |Toggle key matrix debugging                     |
-|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                        |Toggle keyboard debugging                       |
-|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                        |Toggle mouse debugging                          |
-|`MAGIC_KEY_CONSOLE`                 |`C`                                                                        |Enable the Command console                      |
-|`MAGIC_KEY_VERSION`                 |`V`                                                                        |Print the running QMK version to the console    |
-|`MAGIC_KEY_STATUS`                  |`S`                                                                        |Print the current keyboard status to the console|
-|`MAGIC_KEY_HELP`                    |`H`                                                                        |Print Command help to the console               |
-|`MAGIC_KEY_HELP_ALT`                |`SLASH`                                                                    |Print Command help to the console (alternate)   |
-|`MAGIC_KEY_LAYER0`                  |`0`                                                                        |Make layer 0 the default layer                  |
-|`MAGIC_KEY_LAYER0_ALT`              |`GRAVE`                                                                    |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_LAYER1`                  |`1`                                                                        |Make layer 1 the default layer                  |
-|`MAGIC_KEY_LAYER2`                  |`2`                                                                        |Make layer 2 the default layer                  |
-|`MAGIC_KEY_LAYER3`                  |`3`                                                                        |Make layer 3 the default layer                  |
-|`MAGIC_KEY_LAYER4`                  |`4`                                                                        |Make layer 4 the default layer                  |
-|`MAGIC_KEY_LAYER5`                  |`5`                                                                        |Make layer 5 the default layer                  |
-|`MAGIC_KEY_LAYER6`                  |`6`                                                                        |Make layer 6 the default layer                  |
-|`MAGIC_KEY_LAYER7`                  |`7`                                                                        |Make layer 7 the default layer                  |
-|`MAGIC_KEY_LAYER8`                  |`8`                                                                        |Make layer 8 the default layer                  |
-|`MAGIC_KEY_LAYER9`                  |`9`                                                                        |Make layer 9 the default layer                  |
-|`MAGIC_KEY_BOOTLOADER`              |`B`                                                                        |Jump to bootloader                              |
-|`MAGIC_KEY_BOOTLOADER_ALT`          |`ESC`                                                                      |Jump to bootloader (alternate)                  |
-|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                     |Lock the keyboard so nothing can be typed       |
-|`MAGIC_KEY_EEPROM`                  |`E`                                                                        |Print stored EEPROM config to the console       |
-|`MAGIC_KEY_EEPROM_CLEAR`            |`BSPACE`                                                                   |Clear the EEPROM                                |
-|`MAGIC_KEY_NKRO`                    |`N`                                                                        |Toggle N-Key Rollover (NKRO)                    |
-|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                        |Toggle LED when computer is sleeping            |
+|Define                              |Default                         |Description                                     |
+|------------------------------------|--------------------------------|------------------------------------------------|
+|`IS_COMMAND()`                      |`(get_mods() == MOD_MASK_SHIFT)`|The key combination to activate Command         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                          |Set default layer with the Function row         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                          |Set default layer with the number keys          |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                         |Set default layer with `MAGIC_KEY_LAYER0..9`    |
+|`MAGIC_KEY_DEBUG`                   |`D`                             |Toggle debugging over serial                    |
+|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                             |Toggle key matrix debugging                     |
+|`MAGIC_KEY_DEBUG_KBD`               |`K`                             |Toggle keyboard debugging                       |
+|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                             |Toggle mouse debugging                          |
+|`MAGIC_KEY_CONSOLE`                 |`C`                             |Enable the Command console                      |
+|`MAGIC_KEY_VERSION`                 |`V`                             |Print the running QMK version to the console    |
+|`MAGIC_KEY_STATUS`                  |`S`                             |Print the current keyboard status to the console|
+|`MAGIC_KEY_HELP`                    |`H`                             |Print Command help to the console               |
+|`MAGIC_KEY_HELP_ALT`                |`SLASH`                         |Print Command help to the console (alternate)   |
+|`MAGIC_KEY_LAYER0`                  |`0`                             |Make layer 0 the default layer                  |
+|`MAGIC_KEY_LAYER0_ALT`              |`GRAVE`                         |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_LAYER1`                  |`1`                             |Make layer 1 the default layer                  |
+|`MAGIC_KEY_LAYER2`                  |`2`                             |Make layer 2 the default layer                  |
+|`MAGIC_KEY_LAYER3`                  |`3`                             |Make layer 3 the default layer                  |
+|`MAGIC_KEY_LAYER4`                  |`4`                             |Make layer 4 the default layer                  |
+|`MAGIC_KEY_LAYER5`                  |`5`                             |Make layer 5 the default layer                  |
+|`MAGIC_KEY_LAYER6`                  |`6`                             |Make layer 6 the default layer                  |
+|`MAGIC_KEY_LAYER7`                  |`7`                             |Make layer 7 the default layer                  |
+|`MAGIC_KEY_LAYER8`                  |`8`                             |Make layer 8 the default layer                  |
+|`MAGIC_KEY_LAYER9`                  |`9`                             |Make layer 9 the default layer                  |
+|`MAGIC_KEY_BOOTLOADER`              |`B`                             |Jump to bootloader                              |
+|`MAGIC_KEY_BOOTLOADER_ALT`          |`ESC`                           |Jump to bootloader (alternate)                  |
+|`MAGIC_KEY_LOCK`                    |`CAPS`                          |Lock the keyboard so nothing can be typed       |
+|`MAGIC_KEY_EEPROM`                  |`E`                             |Print stored EEPROM config to the console       |
+|`MAGIC_KEY_EEPROM_CLEAR`            |`BSPACE`                        |Clear the EEPROM                                |
+|`MAGIC_KEY_NKRO`                    |`N`                             |Toggle N-Key Rollover (NKRO)                    |
+|`MAGIC_KEY_SLEEP_LED`               |`Z`                             |Toggle LED when computer is sleeping            |

docs/feature_encoders.md

@@ -6,7 +6,6 @@ Basic encoders are supported by adding this to your `rules.mk`:
 
 and this to your `config.h`:
 
-    #define NUMBER_OF_ENCODERS 1
     #define ENCODERS_PAD_A { B12 }
     #define ENCODERS_PAD_B { B13 }
 

docs/feature_split_keyboard.md

@@ -160,6 +160,11 @@ There are some settings that you may need to configure, based on how the hardwar
 
 This allows you to specify a different set of pins for the matrix on the right side.  This is useful if you have a board with differently-shaped halves that requires a different configuration (such as Keebio's Quefrency).
 
+```c
+#define DIRECT_PINS_RIGHT { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }
+```
+
+This allows you to specify a different set of direct pins for the right side.
 
 ```c
 #define RGBLIGHT_SPLIT

docs/feature_tap_dance.md

@@ -1,22 +1,33 @@
 # Tap Dance: A Single Key Can Do 3, 5, or 100 Different Things
 
-<!-- FIXME: Break this up into multiple sections -->
-
+## Introduction
 Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. It's one of the nicest community-contributed features in the firmware, conceived and created by [algernon](https://github.com/algernon) in [#451](https://github.com/qmk/qmk_firmware/pull/451). Here's how algernon describes the feature:
 
 With this feature one can specify keys that behave differently, based on the amount of times they have been tapped, and when interrupted, they get handled before the interrupter.
 
-To make it clear how this is different from `ACTION_FUNCTION_TAP`, let's explore a certain setup! We want one key to send `Space` on single tap, but `Enter` on double-tap.
+## Explanatory Comparison with `ACTION_FUNCTION_TAP`
+`ACTION_FUNCTION_TAP` can offer similar functionality to Tap Dance, but it's worth noting some important differences. To do this, let's explore a certain setup! We want one key to send `Space` on single-tap, but `Enter` on double-tap.
 
-With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be sent first. Thus, `SPC a` will result in `a SPC` being sent, if they are typed within `TAPPING_TERM`. With the tap dance feature, that'll come out as `SPC a`, correctly.
+With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be sent first. Thus, `SPC a` will result in `a SPC` being sent, if `SPC` and `a` are both typed within `TAPPING_TERM`. With the Tap Dance feature, that'll come out correctly as `SPC a` (even if both `SPC` and `a` are typed within the `TAPPING_TERM`.
 
-The implementation hooks into two parts of the system, to achieve this: into `process_record_quantum()`, and the matrix scan. We need the latter to be able to time out a tap sequence even when a key is not being pressed, so `SPC` alone will time out and register after `TAPPING_TERM` time.
+To achieve this correct handling of interrupts, the implementation of Tap Dance hooks into two parts of the system: `process_record_quantum()`, and the matrix scan. These two parts are explained below, but for now the point to note is that we need the latter to be able to time out a tap sequence even when a key is not being pressed. That way, `SPC` alone will time out and register after `TAPPING_TERM` time.
 
-But lets start with how to use it, first!
+## How to Use Tap Dance
+But enough of the generalities; lets look at how to actually use Tap Dance!
 
-First, you will need `TAP_DANCE_ENABLE=yes` in your `rules.mk`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array.
+First, you will need `TAP_DANCE_ENABLE=yes` in your `rules.mk`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. 
 
-This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are five possible options:
+Optionally, you might want to set a custom `TAPPING_TERM` time by adding something like this in you `config.h`:
+
+```
+#define TAPPING_TERM 175
+```
+
+The `TAPPING_TERM` time is the maximum time allowed between taps of your Tap Dance key, and is measured in milliseconds. For example, if you used the above `#define` statement and set up a Tap Dance key that sends `Space` on single-tap and `Enter` on double-tap, then this key will send `ENT` only if you tap this key twice in less than 175ms. If you tap the key, wait more than 175ms, and tap the key again you'll end up sending `SPC SPC` instead. 
+
+Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()` - takes a number, which will later be used as an index into the `tap_dance_actions` array. 
+
+After this, you'll want to use the `tap_dance_actions` array to specify what actions shall be taken when a tap-dance key is in action. Currently, there are five possible options:
 
 * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held.
 * `ACTION_TAP_DANCE_DUAL_ROLE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode).
@@ -24,17 +35,22 @@ This array specifies what actions shall be taken when a tap-dance key is in acti
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
 * `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`.
 
-The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
+The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. 
 
 !> Keep in mind that only [basic keycodes](keycodes_basic.md) are supported here. Custom keycodes are not supported.
 
-And that's the bulk of it!
+Similar to the first option, the second option is good for simple layer-switching cases.
 
-And now, on to the explanation of how it works!
+For more complicated cases, use the third or fourth options (examples of each are listed below). 
 
-The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and the timer.
+Finally, the fifth option is particularly useful if your non-Tap-Dance keys start behaving weirdly after adding the code for your Tap Dance keys. The likely problem is that you changed the `TAPPING_TERM` time to make your Tap Dance keys easier for you to use, and that this has changed the way your other keys handle interrupts.
 
-This means that you have `TAPPING_TERM` time to tap the key again, you do not have to input all the taps within that timeframe. This allows for longer tap counts, with minimal impact on responsiveness.
+## Implementation Details
+Well, that's the bulk of it! You should now be able to work through the examples below, and to develop your own Tap Dance functionality. But if you want a deeper understanding of what's going on behind the scenes, then read on for the explanation of how it all works!
+
+The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and reset the timer.
+
+This means that you have `TAPPING_TERM` time to tap the key again; you do not have to input all the taps within a single `TAPPING_TERM` timeframe. This allows for longer tap counts, with minimal impact on responsiveness.
 
 Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of tap-dance keys.
 
@@ -397,3 +413,111 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 ```
 
 Wrap each tapdance keycode in `TD()` when including it in your keymap, e.g. `TD(ALT_LP)`.
+
+### Example 6: Using tap dance for momentary-layer-switch and layer-toggle keys
+
+Tap Dance can be used to mimic MO(layer) and TG(layer) functionality. For this example, we will set up a key to function as `KC_QUOT` on single-tap, as `MO(_MY_LAYER)` on single-hold, and `TG(_MY_LAYER)` on double-tap.
+
+The first step is to include the following code towards the beginning of your `keymap.c`:
+
+```
+typedef struct {
+  bool is_press_action;
+  int state;
+} tap;
+
+//Define a type for as many tap dance states as you need
+enum {
+  SINGLE_TAP = 1,
+  SINGLE_HOLD = 2,
+  DOUBLE_TAP = 3
+};
+
+enum {
+  QUOT_LAYR = 0     //Our custom tap dance key; add any other tap dance keys to this enum 
+};
+
+//Declare the functions to be used with your tap dance key(s)
+
+//Function associated with all tap dances
+int cur_dance (qk_tap_dance_state_t *state);
+
+//Functions associated with individual tap dances
+void ql_finished (qk_tap_dance_state_t *state, void *user_data);
+void ql_reset (qk_tap_dance_state_t *state, void *user_data);
+
+//Declare variable to track which layer is active
+int active_layer;
+```
+
+The above code is similar to that used in previous examples. The one point to note is that you need to declare a variable to keep track of what layer is currently the active layer. We'll see why shortly.
+
+Towards the bottom of your `keymap.c`, include the following code:
+
+```
+//Update active_layer
+uint32_t layer_state_set_user(uint32_t state) {
+  switch (biton32(state)) {
+    case 1:
+      active_layer = 1;
+      break;
+    case 2:
+      active_layer = 2;
+      break;
+    case 3:
+      active_layer = 3;
+      break;
+    default:
+      active_layer = 0;
+      break;
+  }
+  return state;
+}
+
+//Determine the current tap dance state
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    if (!state->pressed) {return SINGLE_TAP;}
+    else return SINGLE_HOLD;
+  } else if (state->count == 2) {return DOUBLE_TAP;}
+  else return 8;
+}
+
+//Initialize tap structure associated with example tap dance key
+static tap ql_tap_state = {
+  .is_press_action = true,
+  .state = 0
+};
+
+//Functions that control what our tap dance key does
+void ql_finished (qk_tap_dance_state_t *state, void *user_data) {
+  ql_tap_state.state = cur_dance(state);
+  switch (ql_tap_state.state) {
+    case SINGLE_TAP: tap_code(KC_QUOT); break;
+    case SINGLE_HOLD: layer_on(_MY_LAYER); break;
+    case DOUBLE_TAP: 
+      if (active_layer==_MY_LAYER) {layer_off(_MY_LAYER);}
+      else layer_on(_MY_LAYER);
+  }
+}
+
+void ql_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (ql_tap_state.state==SINGLE_HOLD) {layer_off(_MY_LAYER);}
+  ql_tap_state.state = 0;
+}
+
+//Associate our tap dance key with its functionality
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [QUOT_LAYR] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(NULL, ql_finished, ql_reset, 275)
+};
+```
+
+The is where the real logic of our tap dance key gets worked out. Since `layer_state_set_user()` is called on any layer switch, we use it to update `active_layer`. Our example is assuming that your `keymap.c` includes 4 layers, so adjust the switch statement here to fit your actual number of layers.
+
+The use of `cur_dance()` and `ql_tap_state` mirrors the above examples.
+
+The `case:SINGLE_TAP` in `ql_finished` is similar to the above examples. The `case:SINGLE_HOLD` works in conjunction with `ql_reset()` to switch to `_MY_LAYER` while the tap dance key is held, and to switch away from `_MY_LAYER` when the key is released. This mirrors the use of `MO(_MY_LAYER)`. The `case:DOUBLE_TAP` works by checking whether `_MY_LAYER` is the active layer, and toggling it on or off accordingly. This mirrors the use of `TG(_MY_LAYER)`.
+
+`tap_dance_actions[]` works similar to the above examples. Note that I used `ACTION_TAP_DANCE_FN_ADVANCED_TIME()` instead of `ACTION_TAP_DANCE_FN_ADVANCED()`. This is because I like my `TAPPING_TERM` to be short (~175ms) for my non-tap-dance keys but find that this is too quick for me to reliably complete tap dance actions - thus the increased time of 275ms here.
+
+Finally, to get this tap dance key working, be sure to include `TD(QUOT_LAYR)` in your `keymaps[]`.

docs/getting_started_make_guide.md

@@ -83,7 +83,7 @@ This allows the keyboard to tell the host OS that up to 248 keys are held down a
 
 `BACKLIGHT_ENABLE`
 
-This enables your backlight on Timer1 and ports B5, B6, or B7 (for now). You can specify your port by putting this in your `config.h`:
+This enables the in-switch LED backlighting. You can specify the backlight pin by putting this in your `config.h`:
 
     #define BACKLIGHT_PIN B7
 

docs/getting_started_vagrant.md

@@ -1,16 +1,20 @@
 # Vagrant Quick Start
 
-This project includes a Vagrantfile that will allow you to build a new firmware for your keyboard very easily without major changes to your primary operating system. This also ensures that when you clone the project and perform a build, you have the exact same environment as anyone else using the Vagrantfile to build. This makes it much easier for people to help you troubleshoot any issues you encounter.
+This project includes a `Vagrantfile` that will allow you to build a new firmware for your keyboard very easily without major changes to your primary operating system. This also ensures that when you clone the project and perform a build, you have the exact same environment as anyone else using the Vagrantfile to build. This makes it much easier for people to help you troubleshoot any issues you encounter.
 
 ## Requirements
 
-Using the `/Vagrantfile` in this repository requires you have [Vagrant](http://www.vagrantup.com/) as well as [VirtualBox](https://www.virtualbox.org/) (or [VMware Workstation](https://www.vmware.com/products/workstation) and [Vagrant VMware plugin](http://www.vagrantup.com/vmware) but the (paid) VMware plugin requires a licensed copy of VMware Workstation/Fusion).
+Using the `Vagrantfile` in this repository requires you have [Vagrant](http://www.vagrantup.com/) as well as a supported provider installed:
 
-*COMPATIBILITY NOTICE* Certain versions of Virtualbox 5 appear to have an incompatibility with the Virtualbox extensions installed in the boxes in this Vagrantfile. If you encounter any issues with the /vagrant mount not succeeding, please upgrade your version of Virtualbox to at least 5.0.12. **Alternately, you can try running the following command:** `vagrant plugin install vagrant-vbguest`
+* [VirtualBox](https://www.virtualbox.org/) (Version at least 5.0.12)
+  * Sold as 'the most accessible platform to use Vagrant'
+* [VMware Workstation](https://www.vmware.com/products/workstation) and [Vagrant VMware plugin](http://www.vagrantup.com/vmware)
+  * The (paid) VMware plugin requires a licensed copy of VMware Workstation/Fusion
+* [Docker](https://www.docker.com/)
 
-Other than having Vagrant and Virtualbox installed and possibly a restart of your computer afterwards, you can simple run a 'vagrant up' anywhere inside the folder where you checked out this project and it will start a Linux virtual machine that contains all the tools required to build this project. There is a post Vagrant startup hint that will get you off on the right foot, otherwise you can also reference the build documentation below.
+Other than having Vagrant, a suitable provider installed and possibly a restart of your computer afterwards, you can simple run a 'vagrant up' anywhere inside the folder where you checked out this project and it will start an environment (either a virtual machine or container) that contains all the tools required to build this project. There is a post Vagrant startup hint that will get you off on the right foot, otherwise you can also reference the build documentation below.
 
-# Flashing the Firmware
+## Flashing the Firmware
 
 The "easy" way to flash the firmware is using a tool from your host OS:
 
@@ -19,3 +23,35 @@ The "easy" way to flash the firmware is using a tool from your host OS:
 * [Atmel FLIP](http://www.atmel.com/tools/flip.aspx)
 
 If you want to program via the command line you can uncomment the ['modifyvm'] lines in the Vagrantfile to enable the USB passthrough into Linux and then program using the command line tools like dfu-util/dfu-programmer or you can install the Teensy CLI version.
+
+## Vagrantfile Overview
+The development environment is configured to run the QMK Docker image, `qmkfm/base_container`. This not only ensures predictability between systems, it also mirrors the CI environment.
+
+## FAQ
+
+### Why am I seeing issues under Virtualbox?
+Certain versions of Virtualbox 5 appear to have an incompatibility with the Virtualbox extensions installed in the boxes in this Vagrantfile. If you encounter any issues with the /vagrant mount not succeeding, please upgrade your version of Virtualbox to at least 5.0.12. **Alternately, you can try running the following command:**
+
+```console
+vagrant plugin install vagrant-vbguest
+```
+
+### How do I remove an existing environment?
+Finished with your environment? From anywhere inside the folder where you checked out this project, Execute:
+
+```console
+vagrant destory
+```
+
+### What if I want to use Docker directly?
+Want to benefit from the Vagrant workflow without a virtual machine? The Vagrantfile is configured to bypass running a virtual machine, and run the container directly. Execute the following when bringing up the environment to force the use of Docker:
+```console
+vagrant up --provider=docker
+```
+
+### How do I access the virtual machine instead of the Docker container?
+Execute the following to bypass the `vagrant` user booting directly to the official qmk builder image:
+
+```console
+vagrant ssh -c 'sudo -i'
+```

docs/hardware_avr.md

@@ -125,7 +125,7 @@ To configure a keyboard where each switch is connected to a separate pin and gro
 
 ### Backlight Configuration
 
-By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md).
+QMK supports backlighting on most GPIO pins. A select few of these can be driven by the MCU in hardware. For more details see the [Backlight Documentation](feature_backlight.md).
 
 ```c
 #define BACKLIGHT_PIN B7
@@ -134,8 +134,6 @@ By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are us
 #define BREATHING_PERIOD 6
 ```
 
-?> You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
-
 ### Other Configuration Options
 
 There are a lot of features that can be configured or tuned in `config.h`. You should see the [Config Options](config_options.md) page for more details.

docs/i2c_driver.md

@@ -73,7 +73,22 @@ STM32 MCUs allows a variety of pins to be configured as I2C pins depending on th
 | `I2C1_SDA`               | The pin number for the SDA pin (0-9)                                                         | `7`     |
 | `I2C1_BANK` (deprecated) | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`), superceded by `I2C1_SCL_BANK`, `I2C1_SDA_BANK` | `GPIOB` |
 
-STM32 MCUs allow for different timing parameters when configuring I2C. These can be modified using the following parameters, using https://www.st.com/en/embedded-software/stsw-stm32126.html as a reference:
+The ChibiOS I2C driver configuration depends on STM32 MCU:
+
+    STM32F1xx, STM32F2xx, STM32F4xx, STM32L0xx and STM32L1xx use I2Cv1;
+    STM32F0xx, STM32F3xx, STM32F7xx and STM32L4xx use I2Cv2;
+
+#### I2Cv1
+STM32 MCUs allow for different clock and duty parameters when configuring I2Cv1. These can be modified using the following parameters, using <https://www.playembedded.org/blog/stm32-i2c-chibios/#I2Cv1_configuration_structure> as a reference:
+
+| Variable           | Default          |
+|--------------------|------------------|
+| `I2C1_OPMODE`      | `OPMODE_I2C`     |
+| `I2C1_CLOCK_SPEED` | `100000`         |
+| `I2C1_DUTY_CYCLE`  | `STD_DUTY_CYCLE` |
+
+#### I2Cv2
+STM32 MCUs allow for different timing parameters when configuring I2Cv2. These can be modified using the following parameters, using <https://www.st.com/en/embedded-software/stsw-stm32126.html> as a reference:
 
 | Variable              | Default |
 |-----------------------|---------|
@@ -83,13 +98,14 @@ STM32 MCUs allow for different timing parameters when configuring I2C. These can
 | `I2C1_TIMINGR_SCLH`   | `15U`   |
 | `I2C1_TIMINGR_SCLL`   | `21U`   |
 
-STM32 MCUs allow for different "alternate function" modes when configuring GPIO pins. These are required to switch the pins used to I2C mode. See the respective datasheet for the appropriate values for your MCU.
+STM32 MCUs allow for different "alternate function" modes when configuring GPIO pins. These are required to switch the pins used to I2Cv2 mode. See the respective datasheet for the appropriate values for your MCU.
 
 | Variable            | Default |
 |---------------------|---------|
 | `I2C1_SCL_PAL_MODE` | `4`     |
 | `I2C1_SDA_PAL_MODE` | `4`     |
 
+#### Other
 You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
 
 ```C

docs/newbs_building_firmware_configurator.md

@@ -4,7 +4,7 @@ The [QMK Configurator](https://config.qmk.fm) is an online graphical user interf
 
 ?> **Please follow these steps in order.**
 
-Watch the [Video Tutorial](https://youtu.be/7RH-1pAbjvw)
+Watch the [Video Tutorial](https://youtu.be/tx54jkRC9ZY)
 
 The QMK Configurator works best with Chrome/Firefox. 
 

docs/newbs_flashing.md

@@ -223,7 +223,7 @@ For the PJRC devices (Teensy's), when you're ready to compile and flash your fir
 
 For example, if your keymap is named "xyverz" and you're building a keymap for an Ergodox or Ergodox EZ, you'll use this command:
 
-    make erdogox_ez:xyverz:teensy
+    make ergodox_ez:xyverz:teensy
 
 Once the firmware finishes compiling, it will output something like this: 
 

docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md

@@ -34,7 +34,7 @@ For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the
 
 To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.
 
-`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported.
+`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to.
 
 `BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap.
 

drivers/arm/i2c_master.c

@@ -33,11 +33,17 @@
 static uint8_t i2c_address;
 
 static const I2CConfig i2cconfig = {
+#ifdef USE_I2CV1
+  I2C1_OPMODE,
+  I2C1_CLOCK_SPEED,
+  I2C1_DUTY_CYCLE,
+#else
   STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) |
   STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) |
   STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH)  | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL),
   0,
   0
+#endif
 };
 
 static i2c_status_t chibios_to_qmk(const msg_t* status) {
@@ -61,8 +67,13 @@ void i2c_init(void)
 
   chThdSleepMilliseconds(10);
 
+#ifdef USE_I2CV1
+  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+#else
   palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
   palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+#endif
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }
@@ -106,11 +117,11 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data,
   return chibios_to_qmk(&status);
 }
 
-i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_address = devaddr;
   i2cStart(&I2C_DRIVER, &i2cconfig);
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
+  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), &regaddr, 1, data, length, MS2ST(timeout));
   return chibios_to_qmk(&status);
 }
 

drivers/arm/i2c_master.h

@@ -22,10 +22,16 @@
  * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
  * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
  */
+#pragma once
 
 #include "ch.h"
 #include <hal.h>
 
+
+#if defined(STM32F1XX) || defined(STM32F1xx) || defined(STM32F2xx) || defined(STM32F4xx) || defined(STM32L0xx) || defined(STM32L1xx)
+    #define USE_I2CV1
+#endif
+
 #ifdef I2C1_BANK
     #define I2C1_SCL_BANK I2C1_BANK
     #define I2C1_SDA_BANK I2C1_BANK
@@ -46,30 +52,42 @@
     #define I2C1_SDA 7
 #endif
 
-// The default PAL alternate modes are used to signal that the pins are used for I2C
-#ifndef I2C1_SCL_PAL_MODE
-    #define I2C1_SCL_PAL_MODE 4
-#endif
-#ifndef I2C1_SDA_PAL_MODE
-    #define I2C1_SDA_PAL_MODE 4
-#endif
+#ifdef USE_I2CV1
+    #ifndef I2C1_OPMODE
+        #define I2C1_OPMODE OPMODE_I2C
+    #endif
+    #ifndef I2C1_CLOCK_SPEED
+        #define I2C1_CLOCK_SPEED 100000 /* 400000 */
+    #endif
+    #ifndef I2C1_DUTY_CYCLE
+        #define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+    #endif
+#else
+    // The default PAL alternate modes are used to signal that the pins are used for I2C
+    #ifndef I2C1_SCL_PAL_MODE
+        #define I2C1_SCL_PAL_MODE 4
+    #endif
+    #ifndef I2C1_SDA_PAL_MODE
+        #define I2C1_SDA_PAL_MODE 4
+    #endif
 
-// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-#ifndef I2C1_TIMINGR_PRESC
-    #define I2C1_TIMINGR_PRESC 15U
-#endif
-#ifndef I2C1_TIMINGR_SCLDEL
-    #define I2C1_TIMINGR_SCLDEL 4U
-#endif
-#ifndef I2C1_TIMINGR_SDADEL
-    #define I2C1_TIMINGR_SDADEL 2U
-#endif
-#ifndef I2C1_TIMINGR_SCLH
-    #define I2C1_TIMINGR_SCLH 15U
-#endif
-#ifndef I2C1_TIMINGR_SCLL
-    #define I2C1_TIMINGR_SCLL 21U
+    // The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+    #ifndef I2C1_TIMINGR_PRESC
+        #define I2C1_TIMINGR_PRESC 15U
+    #endif
+    #ifndef I2C1_TIMINGR_SCLDEL
+        #define I2C1_TIMINGR_SCLDEL 4U
+    #endif
+    #ifndef I2C1_TIMINGR_SDADEL
+        #define I2C1_TIMINGR_SDADEL 2U
+    #endif
+    #ifndef I2C1_TIMINGR_SCLH
+        #define I2C1_TIMINGR_SCLH 15U
+    #endif
+    #ifndef I2C1_TIMINGR_SCLL
+        #define I2C1_TIMINGR_SCLL 21U
+    #endif
 #endif
 
 #ifndef I2C_DRIVER
@@ -88,5 +106,5 @@ i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length,
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 void i2c_stop(void);

drivers/issi/is31fl3731.c

@@ -71,10 +71,10 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required = false;
+bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false };
 
 uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
+bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
 
 // This is the bit pattern in the LED control registers
 // (for matrix A, add one to register for matrix B)
@@ -204,7 +204,7 @@ void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
         g_pwm_buffer[led.driver][led.r - 0x24] = red;
         g_pwm_buffer[led.driver][led.g - 0x24] = green;
         g_pwm_buffer[led.driver][led.b - 0x24] = blue;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required[led.driver] = true;
     }
 }
 
@@ -220,12 +220,12 @@ void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, b
 {
     is31_led led = g_is31_leds[index];
 
-  uint8_t control_register_r = (led.r - 0x24) / 8;
-  uint8_t control_register_g = (led.g - 0x24) / 8;
-  uint8_t control_register_b = (led.b - 0x24) / 8;
-  uint8_t bit_r = (led.r - 0x24) % 8;
-  uint8_t bit_g = (led.g - 0x24) % 8;
-  uint8_t bit_b = (led.b - 0x24) % 8;
+    uint8_t control_register_r = (led.r - 0x24) / 8;
+    uint8_t control_register_g = (led.g - 0x24) / 8;
+    uint8_t control_register_b = (led.b - 0x24) / 8;
+    uint8_t bit_r = (led.r - 0x24) % 8;
+    uint8_t bit_g = (led.g - 0x24) % 8;
+    uint8_t bit_b = (led.b - 0x24) % 8;
 
     if ( red ) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
@@ -243,28 +243,26 @@ void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, b
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
-    g_led_control_registers_update_required = true;
+    g_led_control_registers_update_required[led.driver] = true;
 
 }
 
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_pwm_buffers( uint8_t addr, uint8_t index )
 {
-    if ( g_pwm_buffer_update_required )
+    if ( g_pwm_buffer_update_required[index] )
     {
-        IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+        IS31FL3731_write_pwm_buffer( addr, g_pwm_buffer[index] );
     }
-    g_pwm_buffer_update_required = false;
+    g_pwm_buffer_update_required[index] = false;
 }
 
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index )
 {
-    if ( g_led_control_registers_update_required )
+    if ( g_led_control_registers_update_required[index] )
     {
         for ( int i=0; i<18; i++ )
         {
-            IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
-            IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
+            IS31FL3731_write_register( addr, i, g_led_control_registers[index][i] );
         }
     }
 }

drivers/issi/is31fl3731.h

@@ -44,8 +44,8 @@ void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, b
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3731_update_pwm_buffers( uint8_t addr, uint8_t index  );
+void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 
 #define C1_1  0x24
 #define C1_2  0x25

drivers/oled/oled_driver.c

@@ -321,7 +321,7 @@ void oled_render(void) {
 
     // Send render data chunk after rotating
     if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
-      print("oled_render data failed\n");
+      print("oled_render90 data failed\n");
       return;
     }
   }
@@ -393,6 +393,11 @@ void oled_write_char(const char data, bool invert) {
     return;
   }
 
+  if (data == '\r') {
+    oled_advance_page(false);
+    return;
+  }
+
   // copy the current render buffer to check for dirty after
   static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
   memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);

keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c

@@ -17,6 +17,19 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Qwerty
+   * ,-----------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |
+   * |-----------------------------------------------------------------------------------------+
+   * |  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+   * |-----------------------------------------------------------------------------------------+
+   * |  Caps   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+   * |-----------------------------------------------------------------------------------------+
+   * |   Shift   |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |      Shift      |
+   * |-----------------------------------------------------------------------------------------+
+   * | Ctrl  |  GUI  |  Alt  |              Space              |  Alt  |  GUI  |  L1   | Ctrl  |
+   * `-----------------------------------------------------------------------------------------'
+   */
   [0] = LAYOUT_60_ansi(
     KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
     KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
@@ -25,6 +38,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL
   ),
 
+  /* Function
+   * ,-----------------------------------------------------------------------------------------.
+   * |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |     | Up  |     |     |     |     |     |     |     |PrtSc|ScrLk|Pause|        |
+   * |-----------------------------------------------------------------------------------------+
+   * |         |Left |Down |Right|     |     |     |     |     | Ins |Home |PgUp |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |VolUp|VolDn|VolMu|     |     |     |     |     | End |PgDn |                 |
+   * |-----------------------------------------------------------------------------------------+
+   * |       |       |       |                                 |       |  L2   |       |       |
+   * `-----------------------------------------------------------------------------------------'
+   */
   [1] = LAYOUT_60_ansi(
     KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
     KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
@@ -33,6 +59,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS
   ),
 
+  /* RGB
+   * ,-----------------------------------------------------------------------------------------.
+   * |     |     |     |     |     |     |     |     |     |     |     |     |     |   Reset   |
+   * |-----------------------------------------------------------------------------------------+
+   * | BL Tog |BLInc|BLDec|BLStp|     |     |     |     |     |     |     |     |     |        |
+   * |-----------------------------------------------------------------------------------------+
+   * | RGB Tog |Mode |Hue I|Sat I|Val I|Spd I|Plain|Breat|Rnbow|Swirl|     |     |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |RMode|Hue D|Sat D|Val D|Spd D|Snake|Knigh|Xmas |Gradi|     |                 |
+   * |-----------------------------------------------------------------------------------------+
+   * |       |       |       |                                 |       |       |       |       |
+   * `-----------------------------------------------------------------------------------------'
+   */
   [2] = LAYOUT_60_ansi(
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
     BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/1upkeyboards/1up60hse/keymaps/vosechu/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 Chuck "@vosechu" Lauer Vose
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/1upkeyboards/1up60hse/keymaps/vosechu/keymap.c

@@ -0,0 +1,46 @@
+/* Copyright 2018 Chuck "@vosechu" Lauer Vose
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define SPACEFN LT(1, KC_SPC)
+#define CTL_GRV CTL_T(KC_GRV)
+#define ALT_TAB ALT_T(KC_TAB)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_60_ansi(
+    KC_ESC  , KC_1     , KC_2    , KC_3    , KC_4    , KC_5    , KC_6     , KC_7    , KC_8    , KC_9     , KC_0    , KC_MINS , KC_EQL  , KC_BSPC ,
+    KC_TAB  , KC_Q     , KC_W    , KC_E    , KC_R    , KC_T    , KC_Y     , KC_U    , KC_I    , KC_O     , KC_P    , KC_LBRC , KC_RBRC , KC_BSLS ,
+    KC_CAPS , KC_A     , KC_S    , KC_D    , KC_F    , KC_G    , KC_H     , KC_J    , KC_K    , KC_L     , KC_SCLN , KC_QUOT , KC_ENT  ,
+    KC_LSFT , KC_Z     , KC_X    , KC_C    , KC_V    , KC_B    , KC_N     , KC_M    , KC_COMM , KC_DOT   , KC_SLSH , KC_RSFT ,
+    CTL_GRV , ALT_TAB  , KC_LGUI ,           SPACEFN           , KC_RALT  , KC_RGUI , MO(1)   , KC_RCTL
+  ),
+
+  [1] = LAYOUT_60_ansi(
+    KC_GRV  , KC_F1    , KC_F2   , KC_F3   , KC_F4   , KC_F5   , KC_F6    , KC_F7   , KC_F8   , KC_F9    , KC_F10  , KC_F11  , KC_F12  , KC_DEL  ,
+    KC_TRNS , KC_TRNS  , KC_UP   , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS  , KC_TRNS , KC_TRNS , KC_TRNS  , KC_PSCR , KC_SLCK , KC_PAUS , KC_TRNS ,
+    KC_TRNS , KC_LEFT  , KC_DOWN , KC_RGHT , KC_TRNS , KC_TRNS , KC_TRNS  , KC_TRNS , KC_TRNS , KC_INS   , KC_HOME , KC_PGUP , KC_TRNS ,
+    KC_TRNS , KC_VOLU  , KC_VOLD , KC_MUTE , KC_TRNS , KC_TRNS , KC_TRNS  , KC_TRNS , KC_TRNS , KC_END   , KC_PGDN , KC_TRNS ,
+    KC_TRNS , KC_TRNS  , KC_TRNS ,           KC_TRNS           , KC_TRNS  , MO(2)   , KC_TRNS , KC_TRNS
+  ),
+
+  [2] = LAYOUT_60_ansi(
+    KC_TRNS , KC_TRNS  , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS  , KC_TRNS , KC_TRNS , KC_TRNS  , KC_TRNS , KC_TRNS , KC_TRNS , RESET   ,
+    BL_TOGG , BL_INC   , BL_DEC  , BL_STEP , KC_TRNS , KC_TRNS , KC_TRNS  , KC_TRNS , KC_TRNS , KC_TRNS  , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS ,
+    RGB_TOG , RGB_MOD  , RGB_HUI , RGB_SAI , RGB_VAI , RGB_SPI , RGB_M_P  , RGB_M_B , RGB_M_R , RGB_M_SW , KC_TRNS , KC_TRNS , KC_TRNS ,
+    KC_TRNS , RGB_RMOD , RGB_HUD , RGB_SAD , RGB_VAD , RGB_SPD , RGB_M_SN , RGB_M_K , RGB_M_X , RGB_M_G  , KC_TRNS , KC_TRNS ,
+    KC_TRNS , KC_TRNS  , KC_TRNS ,           KC_TRNS           , KC_TRNS  , KC_TRNS , KC_TRNS , KC_TRNS
+  )
+};

keyboards/1upkeyboards/1up60hse/keymaps/vosechu/readme.md

@@ -0,0 +1,6 @@
+# 1up60hse keymap made by vosechu
+
+Tweaks from default
+
+* Add in SpaceFN so arrows are reachable with just left hand (leaving right free for mousing).
+* Also add tab/grv under the alt/ctrl keys to make those easier to reach.

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/2_milk/2_milk.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "2_milk.h"

keyboards/2_milk/2_milk.h

@@ -0,0 +1,26 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K00,  \
+  K01  \
+) { \
+  { K00 }, \
+  { K01 } \
+}

keyboards/2_milk/config.h

@@ -0,0 +1,41 @@
+/* Copyright 2019 Sebastian Williams
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xB195
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    rionlion100
+#define PRODUCT         2% Milk
+#define DESCRIPTION     A milk themed 2% Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 1
+
+/* Milk default pinout */
+#define DIRECT_PINS { \
+    {D4}, \
+    {C6}  \
+}
+#define UNUSED_PINS
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN B6
+#define RGBLED_NUM 1
+#endif

keyboards/2_milk/info.json

@@ -0,0 +1,15 @@
+{
+  "keyboard_name": "2% Milk",
+  "keyboard_folder": "2_milk",
+  "url": "",
+  "maintainer": "rionlion100",
+  "width": 1,
+  "height": 2,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 2,
+      "layout": [ {"x": 0, "y": 0 }, {"x": 0, "y": 1 }]
+    }
+  }
+}
+

keyboards/2_milk/keymaps/binary/keymap.c

@@ -0,0 +1,8 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+      [0] = LAYOUT(
+          KC_P0, 
+          KC_P1
+          )
+};

keyboards/2_milk/keymaps/binary/readme.md

@@ -0,0 +1,2 @@
+# Binary keymap 
+0 and 1 that's it 

keyboards/2_milk/keymaps/copypasta/keymap.c

@@ -0,0 +1,9 @@
+    
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+      [0] = LAYOUT(
+          RCTL(KC_C), 
+          RCTL(KC_V)
+          )
+};

keyboards/2_milk/keymaps/copypasta/readme.md

@@ -0,0 +1,2 @@
+# Copy/Paste Keymap
+![Picture](https://i.imgur.com/7LMZZrL.png)

keyboards/2_milk/keymaps/default/keymap.c

@@ -0,0 +1,8 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+      [0] = LAYOUT(
+          KC_Z,
+          KC_X
+          )
+};

keyboards/2_milk/keymaps/default/readme.md

@@ -0,0 +1,2 @@
+# Default keymap for 2% Milk
+![Picture](https://i.imgur.com/9PsZ6wa.png)

keyboards/2_milk/keymaps/emoji/keymap.c

@@ -0,0 +1,31 @@
+#include QMK_KEYBOARD_H
+
+enum custom_keycodes {
+  DISSA,
+  SHRUG
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+      [0] = LAYOUT(
+          SHRUG,
+          DISSA
+          )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case SHRUG:
+      if (record->event.pressed) {
+        send_unicode_hex_string("00AF 005C 005F 0028 30C4 0029 005F 002F 00AF");
+      } else {
+      }
+      break;
+    case DISSA:
+      if (record->event.pressed) {
+          send_unicode_hex_string("0CA0 005F 0CA0");
+      } else {
+      }
+      break;
+  }
+  return true;
+};

keyboards/2_milk/keymaps/emoji/readme.md

@@ -0,0 +1,2 @@
+# Emoji Keymap
+![Picture](https://i.imgur.com/1zEZ9Lq.png)

keyboards/2_milk/keymaps/excessbread/keymap.c

@@ -0,0 +1,8 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+      [0] = LAYOUT(
+          KC_LGUI,
+          KC_F11	
+          )
+};

keyboards/2_milk/keymaps/excessbread/readme.md

@@ -0,0 +1,2 @@
+# ExcessBread's keymap
+requested by excessbread

keyboards/2_milk/keymaps/mouse/keymap.c

@@ -0,0 +1,8 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+      [0] = LAYOUT(
+          KC_BTN1,
+          KC_BTN2	
+          )
+};

keyboards/2_milk/keymaps/mouse/readme.md

@@ -0,0 +1,2 @@
+# left and right mouse buttons
+requested by WanderingVagrant

keyboards/2_milk/readme.md

@@ -0,0 +1,19 @@
+# 2% Milk
+
+![2%Milk](https://i.imgur.com/Ud96uXn.png)
+
+A 2% Meme board themed around a milk carton
+
+Keyboard Maintainer: [Rionlion100](https://github.com/rionlion100)  
+Hardware Availability: [Open Source](https://github.com/Rionlion100/Spaceboards/tree/master/Keyboards/2%25%20Milk)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 2_milk:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+### Credits
++ Case design by Soft
++ PCB by PyroL
++ Name by jetpacktuxedo

keyboards/2_milk/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+F_USB = $(F_CPU)
+
+# Bootloader
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE  = no	# Audio control and System control(+450)
+CONSOLE_ENABLE  = yes	# Console for debug(+400)
+COMMAND_ENABLE  = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE  = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE  = no  # Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE  = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE  = yes # This can be enabled if a ws2812 strip is connected to the expansion port.

keyboards/40percentclub/half_n_half/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/40percentclub/luddite/keymaps/default/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-extern keymap_config_t keymap_config;
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -15,18 +13,18 @@ enum custom_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_BASE] = LAYOUT_60_ansi(
-    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
-    KC_LCTL , KC_LGUI , KC_LALT ,                      KC_SPC                    , KC_RALT , KC_RGUI , MO(_FN1)  , KC_RCTL
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT ,                           KC_SPC,                             KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL
   ),
 
   [_FN1] = LAYOUT_60_ansi(
-    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC, \
-    RGB_TOG, RGB_MOD, KC_UP,   _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
-    BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-    KC_GRV, _______, _______, _______, _______,          _______, _______, _______
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,   KC_BSPC,
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    KC_GRV,  _______, _______,                            _______,                            _______, _______, _______,  _______
   )
 };

keyboards/40percentclub/luddite/keymaps/tzarc/config.h

@@ -0,0 +1,6 @@
+#undef RGBLED_NUM
+#define RGBLED_NUM 16
+
+#define QMK_ESC_OUTPUT F4
+#define QMK_ESC_INPUT D3
+#define QMK_LED B0

keyboards/40percentclub/luddite/keymaps/tzarc/keymap.c

@@ -0,0 +1,30 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_60_ansi(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT ,                           KC_SPC,                             KC_RALT, KC_APP,  MO(_FN1), KC_RCTL
+  ),
+
+  [_FN1] = LAYOUT_60_ansi(
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,   _______,
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    KC_GRV,  _______, _______,                            _______,                            _______, KC_RGUI, _______,  _______
+  )
+};

keyboards/40percentclub/luddite/keymaps/tzarc/rules.mk

@@ -0,0 +1 @@
+BOOTLOADER = qmk-dfu

keyboards/40percentclub/luddite/luddite.h

@@ -3,7 +3,7 @@
 #include "quantum.h"
 
 #define LAYOUT_60_ansi( \
-	 K00, K01, K02, K03, K04, K05, K06, K07, K10, K11, K12, K13, K14, K15, \
+    K00, K01, K02, K03, K04, K05, K06, K07, K10, K11, K12, K13, K14, K15, \
     K16, K17, K20, K21, K22, K23, K24, K25, K26, K27, K30, K31, K32, K33, \
     K34, K35, K36, K37, K40, K41, K42, K43, K44, K45, K46, K47, K50, \
     K51, K52, K53, K54, K55, K56, K57, K60, K61, K62, K63, K64, \
@@ -18,4 +18,3 @@
 	{ K60,   K61,   K62,   K63,   K64,   K65,   K66,   K67 }, \
 	{ K70,   K71,   K72,   K73,   K74 }, \
 }
-

keyboards/6ball/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/9key/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/abstract/ellipse/rev1/config.h

@@ -125,11 +125,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-/*#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)*/
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -239,7 +234,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0
 
-#define NUMBER_OF_ENCODERS 3
 #define ENCODERS_PAD_A { B2, B3, D5 }
 #define ENCODERS_PAD_B { B1, B7, B4 }
 #define ENCODER_RESOLUTION 2

keyboards/adkb96/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/ai03/lunar/keymaps/muzfuz/keymap.c

@@ -0,0 +1,52 @@
+#include QMK_KEYBOARD_H
+
+// Helpful defines
+#define ESC_CTL     CTL_T(KC_ESCAPE)            // Tap for Esc, hold for Ctrl
+#define FL_KCF LT(1,KC_F)
+#define FL_KCJ LT(1,KC_J)
+#define CMD_ENT LGUI(LSFT(KC_ENT))
+
+enum custom_keycodes {
+  HASHRKT = SAFE_RANGE,
+  CLNEQLS,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT( /* Base */
+		KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_BSLS, LGUI(KC_C),
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, LGUI(KC_V),
+		ESC_CTL,          KC_A,    KC_S,    KC_D,    FL_KCF,  KC_G,    KC_H,    FL_KCJ,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_PGDN,
+		CMD_ENT, KC_LALT, KC_LGUI,          KC_SPC,           KC_SPC,           KC_SPC,                    MO(2),   KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+	[1] = LAYOUT( /* FL */
+		KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  KC_VOLU,
+		_______,          HASHRKT, _______, KC_LCBR, KC_RCBR, _______, _______, KC_UNDS, KC_PLUS, KC_PIPE,  _______, _______, _______, _______, KC_VOLD,
+		_______,          CLNEQLS, _______, KC_LBRC, KC_RBRC, _______, _______, KC_MINS, KC_EQL,  KC_BSLS,  KC_TILD, KC_GRV,           _______, KC_HOME,
+		_______,          _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______,          _______, KC_END,
+		_______, _______, _______,          _______,          _______,          _______,                    _______, _______, _______, _______, _______
+	),
+	[2] = LAYOUT( /* FN */
+		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  _______,
+		KC_CAPS,          _______, KC_UP,   _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,
+		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4,   KC_P5,   KC_P6,   _______, _______,          _______, _______,
+		_______,          KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0,   KC_P1,   KC_P2,   KC_P3,   _______, _______,          KC_PGUP, _______,
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
+	)
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch(keycode) {
+    case HASHRKT:
+      if (record->event.pressed) {
+        SEND_STRING("=>");
+      }
+      break;
+    case CLNEQLS:
+      if (record->event.pressed) {
+        SEND_STRING(":=");
+      }
+      break;
+  }
+  return true;
+}

keyboards/ai03/lunar/keymaps/muzfuz/readme.md

@@ -0,0 +1,5 @@
+# muzfuz's keymap for Lunar
+
+```shell
+make ai03/lunar:muzfuz:dfu
+```

keyboards/ai03/lunar/keymaps/via/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.
@@ -83,4 +82,4 @@ HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 SRC += keyboards/wilba_tech/wt_main.c
 
 RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes

keyboards/ai03/lunar/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/ai03/orbit/rules.mk

@@ -5,7 +5,6 @@ SRC += split_util.c \
 	   matrix.c
 
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/akb/raine/config.h

@@ -23,8 +23,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID 0x6060
 #define DEVICE_VER 0x0001
 #define MANUFACTURER AKB
-#define PRODUCT Raine M3
-#define DESCRIPTION Raine M3
+#define PRODUCT Raine
+#define DESCRIPTION Raine
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/akb/raine/info.json

@@ -68,10 +68,12 @@
                 { "label": "2", "x": 14.25, "y": 3 },
                 { "label": "3", "x": 15.25, "y": 3 },
                 { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 },
+                { "label": "Win", "x": 1.25, "y": 4},
                 { "label": "Alt", "x": 2.25, "y": 4, "w": 1.25 },
                 { "label": "SPLEFT", "x": 3.5, "y": 4, "w": 2.25 },
                 { "label": "7U", "x": 5.75, "y": 4 },
                 { "label": "SPRIGHT", "x": 6.75, "y": 4, "w": 1.75 },
+                { "label": "alt", "x": 8.5, "y": 4},
                 { "label": "Menu", "x": 9.5, "y": 4, "w": 1.25 },
                 { "x": 11, "y": 4.25 },
                 { "x": 12, "y": 4.25 },

keyboards/akb/raine/keymaps/default/keymap.c

@@ -17,16 +17,16 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT( /* Base */
-  KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_BSPC, KC_NLCK, KC_SLCK, KC_INS,
+  KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_BSPC, KC_PSLS, KC_PAST, KC_PPLS,
 	KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_P7, KC_P8, KC_P9,
-	MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_HASH, KC_ENT, KC_P4, KC_P5, KC_P6,
-	KC_LSFT, KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3,
-	KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LGUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_DEL),
+	CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6,
+	KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,
+	KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_BSPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT),
   [1] = LAYOUT( /* Second */
-  KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______,
-	_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______,
-	_______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, _______, _______, _______, _______, _______,
-	_______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, _______, _______, _______, _______, _______, _______,
-	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
+  KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_DEL, KC_NLCK, KC_PSCR, KC_INS,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, KC_HOME, KC_UP, KC_PGUP,
+	_______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, _______, _______, KC_LEFT, KC_SLCK, KC_RGHT,
+	_______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, _______, _______, _______, KC_END, KC_DOWN, KC_PGDN,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
 };
 

keyboards/akb/raine/raine.h

@@ -23,11 +23,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111,       K113, K114, K115, \
 	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309,       K311, K312, K313, K314, K315, \
-	K400,       K402,       K404, K405,       K407,       K409,       K410,       K412, K413, K414, K415  \
+	K400, K401, K402,       K404, K405,       K407, K408, K409,       K410,       K412, K413, K414, K415  \
 ) { \
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  KC_NO, K113,  K114,  K115 }, \
 	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215 }, \
 	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K311,  KC_NO, K312,  K313,  K314,  K315 }, \
-	{ K400,  KC_NO,  K402,  KC_NO, K404,  K405,  KC_NO, K407,  KC_NO,  K409,  K410,  KC_NO, K412,  K413,  K414,  K415 }  \
+	{ K400,  K401,  K402,  KC_NO, K404,  K405,  KC_NO, K407,  K408,  K409,  K410,  KC_NO, K412,  K413,  K414,  K415 }  \
 }

keyboards/al1/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.
@@ -69,4 +68,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
 CUSTOM_MATRIX = yes
-SRC += matrix.c
+SRC += matrix.c

keyboards/alf/dc60/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/alf/x11/info.json

@@ -1,103 +1,112 @@
 {
-    "keyboard_name": "QMK80",
-    "url": "",
-    "maintainer": "qmk",
-    "width": 18.25,
-    "height": 6.5,
-    "layouts": {
-      "LAYOUT": {
-        "key_count": 88,
-        "layout": [
-          {"label":"K00", "x":0, "y":0},
-          {"label":"K01", "x":2, "y":0},
-          {"label":"K02", "x":3, "y":0},
-          {"label":"K03", "x":4, "y":0},
-          {"label":"K04", "x":5, "y":0},
-          {"label":"K05", "x":6.5, "y":0},
-          {"label":"K06", "x":7.5, "y":0},
-          {"label":"K07", "x":8.5, "y":0},
-          {"label":"K08", "x":9.5, "y":0},
-          {"label":"K09", "x":11, "y":0},
-          {"label":"K0A", "x":12, "y":0},
-          {"label":"K0B", "x":13, "y":0},
-          {"label":"K0C", "x":14, "y":0},
-          {"label":"K60", "x":15.25, "y":0},
-          {"label":"K61", "x":16.25, "y":0},
-          {"label":"K62", "x":17.25, "y":0},
-          {"label":"K10", "x":0, "y":1.5},
-          {"label":"K11", "x":1, "y":1.5},
-          {"label":"K12", "x":2, "y":1.5},
-          {"label":"K13", "x":3, "y":1.5},
-          {"label":"K14", "x":4, "y":1.5},
-          {"label":"K15", "x":5, "y":1.5},
-          {"label":"K16", "x":6, "y":1.5},
-          {"label":"K17", "x":7, "y":1.5},
-          {"label":"K18", "x":8, "y":1.5},
-          {"label":"K19", "x":9, "y":1.5},
-          {"label":"K1A", "x":10, "y":1.5},
-          {"label":"K1B", "x":11, "y":1.5},
-          {"label":"K1C", "x":12, "y":1.5},
-          {"label":"K5A", "x":13, "y":1.5, "w":2},
-          {"label":"K63", "x":15.25, "y":1.5},
-          {"label":"K65", "x":16.25, "y":1.5},
-          {"label":"K67", "x":17.25, "y":1.5},
-          {"label":"K20", "x":0, "y":2.5, "w":1.5},
-          {"label":"K21", "x":1.5, "y":2.5},
-          {"label":"K22", "x":2.5, "y":2.5},
-          {"label":"K23", "x":3.5, "y":2.5},
-          {"label":"K24", "x":4.5, "y":2.5},
-          {"label":"K25", "x":5.5, "y":2.5},
-          {"label":"K26", "x":6.5, "y":2.5},
-          {"label":"K27", "x":7.5, "y":2.5},
-          {"label":"K28", "x":8.5, "y":2.5},
-          {"label":"K29", "x":9.5, "y":2.5},
-          {"label":"K2A", "x":10.5, "y":2.5},
-          {"label":"K2B", "x":11.5, "y":2.5},
-          {"label":"K2C", "x":12.5, "y":2.5},
-          {"label":"K4C", "x":13.5, "y":2.5, "w":1.5},
-          {"label":"K64", "x":15.25, "y":2.5},
-          {"label":"K66", "x":16.25, "y":2.5},
-          {"label":"K68", "x":17.25, "y":2.5},
-          {"label":"K30", "x":0, "y":3.5, "w":1.75},
-          {"label":"K31", "x":1.75, "y":3.5},
-          {"label":"K32", "x":2.75, "y":3.5},
-          {"label":"K33", "x":3.75, "y":3.5},
-          {"label":"K34", "x":4.75, "y":3.5},
-          {"label":"K35", "x":5.75, "y":3.5},
-          {"label":"K36", "x":6.75, "y":3.5},
-          {"label":"K37", "x":7.75, "y":3.5},
-          {"label":"K38", "x":8.75, "y":3.5},
-          {"label":"K39", "x":9.75, "y":3.5},
-          {"label":"K3A", "x":10.75, "y":3.5},
-          {"label":"K3B", "x":11.75, "y":3.5},
-          {"label":"K3C", "x":12.75, "y":3.5, "w":2.25},
-          {"label":"K40", "x":0, "y":4.5, "w":2.25},
-          {"label":"K41", "x":2.25, "y":4.5},
-          {"label":"K42", "x":3.25, "y":4.5},
-          {"label":"K43", "x":4.25, "y":4.5},
-          {"label":"K44", "x":5.25, "y":4.5},
-          {"label":"K45", "x":6.25, "y":4.5},
-          {"label":"K46", "x":7.25, "y":4.5},
-          {"label":"K47", "x":8.25, "y":4.5},
-          {"label":"K48", "x":9.25, "y":4.5},
-          {"label":"K49", "x":10.25, "y":4.5},
-          {"label":"K4A", "x":11.25, "y":4.5},
-          {"label":"K4B", "x":12.25, "y":4.5, "w":1.75},
-          {"label":"K69", "x":14, "y":4.5},
-          {"label":"K58", "x":16.25, "y":4.5},
-          {"label":"K50", "x":0, "y":5.5, "w":1.25},
-          {"label":"K51", "x":1.25, "y":5.5, "w":1.25},
-          {"label":"K52", "x":2.5, "y":5.5, "w":1.25},
-          {"label":"K53", "x":3.75, "y":5.5, "w":6.25},
-          {"label":"K54", "x":10, "y":5.5, "w":1.25},
-          {"label":"K55", "x":11.25, "y":5.5, "w":1.25},
-          {"label":"K56", "x":12.5, "y":5.5, "w":1.25},
-          {"label":"K57", "x":13.75, "y":5.5, "w":1.25},
-          {"label":"K6A", "x":15.25, "y":5.5},
-          {"label":"K59", "x":16.25, "y":5.5},
-          {"label":"K6B", "x":17.25, "y":5.5}
-        ]
-      }
+  "keyboard_name": "x11",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 18.25,
+  "height": 6.5,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 88,
+      "layout": [
+        {"label":"K00", "x":0, "y":0},
+        {"label":"K01", "x":2, "y":0},
+        {"label":"K02", "x":3, "y":0},
+        {"label":"K03", "x":4, "y":0},
+        {"label":"K04", "x":5, "y":0},
+        {"label":"K05", "x":6.5, "y":0},
+        {"label":"K06", "x":7.5, "y":0},
+        {"label":"K07", "x":8.5, "y":0},
+        {"label":"K08", "x":9.5, "y":0},
+        {"label":"K09", "x":11, "y":0},
+        {"label":"K0A", "x":12, "y":0},
+        {"label":"K0B", "x":13, "y":0},
+        {"label":"K0C", "x":14, "y":0},
+
+        {"label":"K62", "x":15.25, "y":0},
+        {"label":"K61", "x":16.25, "y":0},
+        {"label":"K60", "x":17.25, "y":0},
+
+        {"label":"K10", "x":0, "y":1.5},
+        {"label":"K11", "x":1, "y":1.5},
+        {"label":"K12", "x":2, "y":1.5},
+        {"label":"K13", "x":3, "y":1.5},
+        {"label":"K14", "x":4, "y":1.5},
+        {"label":"K15", "x":5, "y":1.5},
+        {"label":"K16", "x":6, "y":1.5},
+        {"label":"K17", "x":7, "y":1.5},
+        {"label":"K18", "x":8, "y":1.5},
+        {"label":"K19", "x":9, "y":1.5},
+        {"label":"K1A", "x":10, "y":1.5},
+        {"label":"K1B", "x":11, "y":1.5},
+        {"label":"K1C", "x":12, "y":1.5},
+        {"label":"K5A", "x":13, "y":1.5, "w":2},
+
+        {"label":"K63", "x":15.25, "y":1.5},
+        {"label":"K65", "x":16.25, "y":1.5},
+        {"label":"K67", "x":17.25, "y":1.5},
+
+        {"label":"K20", "x":0, "y":2.5, "w":1.5},
+        {"label":"K21", "x":1.5, "y":2.5},
+        {"label":"K22", "x":2.5, "y":2.5},
+        {"label":"K23", "x":3.5, "y":2.5},
+        {"label":"K24", "x":4.5, "y":2.5},
+        {"label":"K25", "x":5.5, "y":2.5},
+        {"label":"K26", "x":6.5, "y":2.5},
+        {"label":"K27", "x":7.5, "y":2.5},
+        {"label":"K28", "x":8.5, "y":2.5},
+        {"label":"K29", "x":9.5, "y":2.5},
+        {"label":"K2A", "x":10.5, "y":2.5},
+        {"label":"K2B", "x":11.5, "y":2.5},
+        {"label":"K2C", "x":12.5, "y":2.5},
+        {"label":"K4C", "x":13.5, "y":2.5, "w":1.5},
+
+        {"label":"K64", "x":15.25, "y":2.5},
+        {"label":"K66", "x":16.25, "y":2.5},
+        {"label":"K68", "x":17.25, "y":2.5},
+
+        {"label":"K30", "x":0, "y":3.5, "w":1.75},
+        {"label":"K31", "x":1.75, "y":3.5},
+        {"label":"K32", "x":2.75, "y":3.5},
+        {"label":"K33", "x":3.75, "y":3.5},
+        {"label":"K34", "x":4.75, "y":3.5},
+        {"label":"K35", "x":5.75, "y":3.5},
+        {"label":"K36", "x":6.75, "y":3.5},
+        {"label":"K37", "x":7.75, "y":3.5},
+        {"label":"K38", "x":8.75, "y":3.5},
+        {"label":"K39", "x":9.75, "y":3.5},
+        {"label":"K3A", "x":10.75, "y":3.5},
+        {"label":"K3B", "x":11.75, "y":3.5},
+        {"label":"K3C", "x":12.75, "y":3.5, "w":2.25},
+
+        {"label":"K40", "x":0, "y":4.5, "w":2.25},
+        {"label":"K41", "x":2.25, "y":4.5},
+        {"label":"K42", "x":3.25, "y":4.5},
+        {"label":"K43", "x":4.25, "y":4.5},
+        {"label":"K44", "x":5.25, "y":4.5},
+        {"label":"K45", "x":6.25, "y":4.5},
+        {"label":"K46", "x":7.25, "y":4.5},
+        {"label":"K47", "x":8.25, "y":4.5},
+        {"label":"K48", "x":9.25, "y":4.5},
+        {"label":"K49", "x":10.25, "y":4.5},
+        {"label":"K4A", "x":11.25, "y":4.5},
+        {"label":"K4B", "x":12.25, "y":4.5, "w":1.75},
+        {"label":"K69", "x":14, "y":4.5},
+
+        {"label":"K58", "x":16.25, "y":4.5},
+
+        {"label":"K50", "x":0, "y":5.5, "w":1.25},
+        {"label":"K51", "x":1.25, "y":5.5, "w":1.25},
+        {"label":"K52", "x":2.5, "y":5.5, "w":1.25},
+        {"label":"K53", "x":3.75, "y":5.5, "w":6.25},
+        {"label":"K54", "x":10, "y":5.5, "w":1.25},
+        {"label":"K55", "x":11.25, "y":5.5, "w":1.25},
+        {"label":"K56", "x":12.5, "y":5.5, "w":1.25},
+        {"label":"K57", "x":13.75, "y":5.5, "w":1.25},
+
+        {"label":"K6A", "x":15.25, "y":5.5},
+        {"label":"K59", "x":16.25, "y":5.5},
+        {"label":"K6B", "x":17.25, "y":5.5}
+      ]
     }
   }
-  
+}

keyboards/alf/x11/keymaps/default/keymap.c

@@ -15,64 +15,23 @@
  */
 #include QMK_KEYBOARD_H
 
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-  QMKBEST = SAFE_RANGE,
-  QMKURL
-};
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT( \
-    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
-    KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    \
-    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    \
-    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN, KC_CAPS, KC_A,    \
-    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_LSFT, KC_Z,    \
-    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),   KC_UP,   KC_LCTL, \
-    KC_LGUI, KC_LALT, KC_SPC,  KC_RALT, MO(1),   KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  \
-  ),
-  [1] = LAYOUT( \
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-    KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, \
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_MPLY, KC_MSTP, RGB_TOG, RGB_MOD, \
-    RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, KC_TRNS, \
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_VAD, RGB_SAD  \
-  ),
+    [0] = LAYOUT(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,      KC_PSCR, KC_SLCK, KC_PAUS,
 
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),                KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_RGUI, KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______, _______, RESET,
+
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______, _______, _______,
+        BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     KC_MUTE, KC_MPLY, KC_MSTP,
+        RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,              _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______,     _______, _______, _______
+    )
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QMKBEST:
-      if (record->event.pressed) {
-        // when keycode QMKBEST is pressed
-        SEND_STRING("QMK is the best thing ever!");
-      } else {
-        // when keycode QMKBEST is released
-      }
-      break;
-    case QMKURL:
-      if (record->event.pressed) {
-        // when keycode QMKURL is pressed
-        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
-      } else {
-        // when keycode QMKURL is released
-      }
-      break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/alf/x11/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/alf/x11/x11.c

@@ -16,48 +16,49 @@
 #include "x11.h"
 
 void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	setPinOutput(C6);
-	setPinOutput(E6);
-	setPinOutput(C7);
-	matrix_init_user();
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+
+    setPinOutput(C6);
+    setPinOutput(E6);
+    setPinOutput(C7);
+    matrix_init_user();
 }
 
 void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
 
-	matrix_scan_user();
+    matrix_scan_user();
 }
 
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
 
-	return process_record_user(keycode, record);
+    return process_record_user(keycode, record);
 }
 
 void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 
-	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-		writePinLow(C6);
-	} else {
-		writePinHigh(C6);
-	}
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        writePinLow(C6);
+    } else {
+        writePinHigh(C6);
+    }
 
-	if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-		writePinLow(E6);
-	} else {
-		writePinHigh(E6);
-	}
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinLow(E6);
+    } else {
+        writePinHigh(E6);
+    }
 
-	if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-		writePinLow(C7);
-	} else {
-		writePinHigh(C7);
-	}
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+        writePinLow(C7);
+    } else {
+        writePinHigh(C7);
+    }
 
-	led_set_user(usb_led);
+    led_set_user(usb_led);
 }

keyboards/alf/x11/x11.h

@@ -26,18 +26,18 @@
  * represents the switch matrix.
  */
 #define LAYOUT( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K60, K61, K62, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K5A, K63, K65, K67, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4C, K64, K66, K68, \
-  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
-  K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K69, K58, \
-  K50, K51, K52, K53, K54, K55, K56, K57, K6A, K59, K6B  \
+    K00,      K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K62, K61, K60, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K5A,      K63, K65, K67, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4C,      K64, K66, K68, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3C, \
+    K40,      K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K69,           K58, \
+    K50, K51, K52,                K53,                K54, K55, K56, K57,      K6A, K59, K6B  \
 ) { \
-  {   K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C   }, \
-  {   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C   }, \
-  {   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C   }, \
-  {   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C   }, \
-  {   K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A,   K4B,   K4C   }, \
-  {   K50,   K51,   K52,   K53,   K54,   K55,   K56,   K57,   K58,   K59,   K5A,   KC_NO, KC_NO }, \
-  {   K60,   K61,   K62,   K63,   K64,   K65,   K66,   K67,   K68,   K69,   K6A,   K6B,   KC_NO }, \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C   }, \
+    { K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A,   K4B,   K4C   }, \
+    { K50,   K51,   K52,   K53,   K54,   K55,   K56,   K57,   K58,   K59,   K5A,   KC_NO, KC_NO }, \
+    { K60,   K61,   K62,   K63,   K64,   K65,   K66,   K67,   K68,   K69,   K6A,   K6B,   KC_NO }, \
 }

keyboards/alice/readme.md

@@ -1,60 +0,0 @@
-# TGR Alice
-
-![TGR Alice](https://i.imgur.com/cJohEqS.jpg)
-
-An ergonomic 60% keyboard.
-
-Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury)  
-Hardware Supported: TGR Alice  
-Hardware Availability: Group buy finished  
-
-Make example for this keyboard (after setting up your build environment):
-
-    make alice:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-
-ps2avrGB keyboard firmware
-==========================
-
-This keyboard uses the port of the QMK firmware for boards that are based on the
-ps2avrGB firmware.
-
-Note that this is a complete replacement for the firmware, so you won't be
-using Bootmapper Client to change any keyboard settings, since not all the
-USB report options are supported.
-
-## Installing
-
-First, install the requirements. These commands are for OSX, but all you
-need is the AVR toolchain and `bootloadHID` for flashing:
-
-```
-$ brew cask install crosspack-avr
-$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-$ pip install pyusb
-```
-
-Then, with the keyboard plugged in, simply run this command from the
-`qmk_firmware` directory:
-
-```
-$ make alice
-$ bootloadHID -r alice_default.hex
-```
-
-## Setting the board to bootloader mode
-
-Hold the ESC key (the one before the 1! key, in case you remaped it).
-
-## Troubleshooting
-
-From my experience, it's really hard to brick these boards. But these
-tricks have been useful when it got stuck in a weird scenario.
-
-1. Try plugging the board in while holding the bootloader key. This will force
-   it to boot only the bootloader without loading the firmware. Once this is
-   done, just reflash the board with the original firmware.
-2. Sometimes USB hubs can act weird, so try connecting the board directly
-   to your computer or plugging/unplugging the USB hub.

keyboards/amj40/rules.mk

@@ -1,6 +1,4 @@
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/amj60/rules.mk

@@ -1,6 +1,4 @@
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.
@@ -65,4 +63,4 @@ AUDIO_ENABLE     = no
 UNICODE_ENABLE   = no  # Unicode
 BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
 
-LAYOUTS = 60_ansi
+LAYOUTS = 60_ansi

keyboards/amj96/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/amjkeyboard/amj66/amj66.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "amj66.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/amjkeyboard/amj66/amj66.h

@@ -0,0 +1,79 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+
+/* LAYOUT_all
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ │0F │    ISO Enter
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ ├───┤      ┌─────┐
+ * │10   │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D   │ │1E │      │2C   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┘   ┌──┴┐    │
+ * │20    │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C      │         │1D │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴──┬───┬─┴─┐       └───┴────┘
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C  │3D │3E │
+ * ├────┴┬──┴─┬─┴──┬┴───┴───┴─┬─┴───┴───┴┬──┴─┬─┴──┬┴────┼───┼───┼───┐
+ * │40   │41  │42  │43        │44        │45  │46  │47   │48 │49 │4A │
+ * └─────┴────┴────┴──────────┴──────────┴────┴────┴─────┴───┴───┴───┘
+ * 2u Backspace      = k0D
+ * ISO #             = k1D
+ * 2.25u Right Shift = k3C
+ * 6.25u Space       = k44
+ */
+#define LAYOUT_all( \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E,   k0F, \
+    k10,      k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,        k1E, \
+    k20,      k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B,      k2C, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
+    k40, k41, k42,           k43, k44,           k45, k46, k47,      k48, k49, k4A \
+) { \
+    {  k00,  k01,  k02,  k03,  k04,  k05,  k06,  k07,  k08,  k09,  k0A,  k0B,    k0C,    k0D,    k0E,    k0F    }, \
+    {  k10,  k11,  k12,  k13,  k14,  k15,  k16,  k17,  k18,  k19,  k1A,  k1B,    k1C,    k1D,    k1E,    KC_NO  }, \
+    {  k20,  k21,  k22,  k23,  k24,  k25,  k26,  k27,  k28,  k29,  k2A,  k2B,    k2C,    KC_NO,  KC_NO,  KC_NO  }, \
+    {  k30,  k31,  k32,  k33,  k34,  k35,  k36,  k37,  k38,  k39,  k3A,  k3B,    k3C,    k3D,    k3E,    KC_NO  }, \
+    {  k40,  k41,  k42,  k43,  k44,  k45,  k46,  k47,  k48,  k49,  k4A,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO  } \
+}
+
+#define LAYOUT_66_ansi( \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D,   k0F, \
+    k10,      k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,   k1E, \
+    k20,      k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B,      k2C, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,      k3E, \
+    k40, k41, k42,                k44,           k45, k46, k47,      k48, k49, k4A \
+) { \
+    {  k00,  k01,    k02,  k03,    k04,  k05,  k06,  k07,  k08,  k09,  k0A,  k0B,    k0C,    k0D,    KC_NO,  k0F    }, \
+    {  k10,  k11,    k12,  k13,    k14,  k15,  k16,  k17,  k18,  k19,  k1A,  k1B,    k1C,    k1D,    k1E,    KC_NO  }, \
+    {  k20,  k21,    k22,  k23,    k24,  k25,  k26,  k27,  k28,  k29,  k2A,  k2B,    k2C,    KC_NO,  KC_NO,  KC_NO  }, \
+    {  k30,  KC_NO,  k32,  k33,    k34,  k35,  k36,  k37,  k38,  k39,  k3A,  k3B,    k3C,    KC_NO,  k3E,    KC_NO  }, \
+    {  k40,  k41,    k42,  KC_NO,  k44,  k45,  k46,  k47,  k48,  k49,  k4A,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO  } \
+}
+
+#define LAYOUT_66_iso( \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D,   k0F, \
+    k10,      k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C,        k1E, \
+    k20,      k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2C, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,      k3E, \
+    k40, k41, k42,                k44,           k45, k46, k47,      k48, k49, k4A \
+) { \
+    {  k00,  k01,  k02,  k03,    k04,  k05,  k06,  k07,  k08,  k09,  k0A,  k0B,    k0C,    k0D,    KC_NO,  k0F    }, \
+    {  k10,  k11,  k12,  k13,    k14,  k15,  k16,  k17,  k18,  k19,  k1A,  k1B,    k1C,    k1D,    k1E,    KC_NO  }, \
+    {  k20,  k21,  k22,  k23,    k24,  k25,  k26,  k27,  k28,  k29,  k2A,  k2B,    k2C,    KC_NO,  KC_NO,  KC_NO  }, \
+    {  k30,  k31,  k32,  k33,    k34,  k35,  k36,  k37,  k38,  k39,  k3A,  k3B,    k3C,    KC_NO,  k3E,    KC_NO  }, \
+    {  k40,  k41,  k42,  KC_NO,  k44,  k45,  k46,  k47,  k48,  k49,  k4A,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO  } \
+}

keyboards/amjkeyboard/amj66/config.h

@@ -0,0 +1,55 @@
+/*
+Copyright 2018 Alex Peters
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xBD66
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AMJKeyboard
+#define PRODUCT         AMJ66
+#define DESCRIPTION     QMK keyboard firmware for AMJ66
+
+/* Key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/* Keyboard Matrix Assignments */
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1 }
+#define MATRIX_COL_PINS { F0, B3, B2, B1, B0, B7, D0, D1, D2, D3, D5, D6, D7, B4, B5, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+#define BACKLIGHT_ON_STATE 1
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/amjkeyboard/amj66/info.json

@@ -0,0 +1,227 @@
+{
+    "keyboard_name": "AMJ66",
+    "url": "",
+    "maintainer": "FSund, qmk",
+    "width": 16.5,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "key_count": 70,
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"|", "x":13, "y":0},
+                {"label":"~", "x":14, "y":0},
+                {"label":"Insert", "x":15.5, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"Backspace", "x":13.5, "y":1, "w":1.5},
+                {"label":"Delete", "x":15.5, "y":1},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"ISO Backslash", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.25},
+                {"label":"HHKB Fn", "x":13.5, "y":3},
+                {"label":"Up", "x":14.5, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"GUI", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"label":"Space", "x":4, "y":4, "w":2.75},
+                {"label":"Space", "x":6.75, "y":4, "w":2.75},
+                {"label":"Alt", "x":9.5, "y":4, "w":1.5},
+                {"label":"GUI", "x":11, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":12.25, "y":4, "w":1.25},
+                {"label":"Left", "x":13.5, "y":4},
+                {"label":"Down", "x":14.5, "y":4},
+                {"label":"Right", "x":15.5, "y":4}
+            ]
+        },
+        "LAYOUT_66_ansi": {
+            "key_count": 66,
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"label":"Insert", "x":15.5, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Delete", "x":15.5, "y":1},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":2.25},
+                {"label":"Up", "x":14.5, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"GUI", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Fn", "x":11.25, "y":4},
+                {"label":"Ctrl", "x":12.25, "y":4, "w":1.25},
+                {"label":"Left", "x":13.5, "y":4},
+                {"label":"Down", "x":14.5, "y":4},
+                {"label":"Right", "x":15.5, "y":4}
+            ]
+        },
+        "LAYOUT_66_iso": {
+            "key_count": 67,
+            "layout": [
+                {"label":"\u00ac", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"\"", "x":2, "y":0},
+                {"label":"\u00a3", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"label":"Insert", "x":15.5, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"Delete", "x":15.5, "y":1},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"@", "x":11.75, "y":2},
+                {"label":"~", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"|", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":2.25},
+                {"label":"Up", "x":14.5, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"GUI", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"AltGr", "x":10, "y":4, "w":1.25},
+                {"label":"GUI", "x":11.25, "y":4},
+                {"label":"Ctrl", "x":12.25, "y":4, "w":1.25},
+                {"label":"Left", "x":13.5, "y":4},
+                {"label":"Down", "x":14.5, "y":4},
+                {"label":"Right", "x":15.5, "y":4}
+            ]
+        }
+    }
+}

keyboards/amjkeyboard/amj66/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/amjkeyboard/amj66/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSPC,     KC_INS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,              KC_DEL,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),   KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,  KC_SPC,                    KC_RALT, MO(1),   KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [1] = LAYOUT_all(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC, KC_BSPC,     KC_INS,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE,              KC_DEL,
+        RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_BRTG, BL_STEP, KC_SLEP, _______, _______, KC_PGUP,
+        _______, _______, _______,                   _______, _______,                   _______, _______, _______,          KC_HOME, KC_PGDN, KC_END
+    ),
+
+};

keyboards/amjkeyboard/amj66/keymaps/default/readme.md

@@ -0,0 +1,12 @@
+# The default keymap for AMJ66
+
+![AMJ66 Layout Image](https://i.imgur.com/QNpHnMe.jpg)
+
+This is a fairly universal layout that supports standard ANSI, split backspace,
+split left shift, and split right shift.  
+Cycle backlight: Fn + .  
+Backlight breathing: Fn + ,  
+Volume Up/Down: Fn + [ and Fn + ]  
+Mute: Fn + \  
+Sleep: Fn + /  
+Bootloader Mode: Fn + CapsLock  

keyboards/amjkeyboard/amj66/readme.md

@@ -0,0 +1,15 @@
+# AMJ66
+
+![AMJ66](https://i.imgur.com/qtLuL2o.jpg)
+
+A 66% keyboard formerly sold by Massdrop and KBDFans.
+
+Keyboard Maintainer: [FSund](https://github.com/fsund), [The QMK Community](https://github.com/qmk)  
+Hardware Supported: AMJ66, ATmega32U4  
+Hardware Availability: [Drop.com](https://drop.com/buy/kbd66-mechanical-keyboard-kit?mode=guest_open)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make amjkeyboard/amj66:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/amjkeyboard/amj66/rules.mk

@@ -0,0 +1,70 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+LAYOUTS = 66_ansi 66_iso

keyboards/amjpad/rules.mk

@@ -1,6 +1,4 @@
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/angel64/config.h

@@ -48,16 +48,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 64
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 64
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 25 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+ /*== all animations enable ==*/
+   #define RGBLIGHT_ANIMATIONS
 // /*== or choose animations ==*/
 //   #define RGBLIGHT_EFFECT_BREATHING
 //   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
@@ -74,7 +74,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   /*==== use exp() and sin() ====*/
 //   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
+#endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5

keyboards/angel64/rules.mk

@@ -61,17 +61,17 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/ares/config.h

@@ -36,7 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 

keyboards/atomic/rules.mk

@@ -1,7 +1,4 @@
-
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.
@@ -68,4 +65,4 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-LAYOUTS = ortho_5x15
+LAYOUTS = ortho_5x15

keyboards/atreus62/rules.mk

@@ -1,6 +1,4 @@
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/baguette/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/bantam44/rules.mk

@@ -1,7 +1,4 @@
-
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/bfake/config.h

@@ -37,7 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 

keyboards/blockey/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.

keyboards/boston_meetup/2019/config.h

@@ -26,7 +26,6 @@
 #define MATRIX_ROW_PINS { A3, B8, B9, B1 }
 #define MATRIX_COL_PINS { A7, A8, B2, B10 }
 
-#define NUMBER_OF_ENCODERS 1
 #define ENCODERS_PAD_A { B13 }
 #define ENCODERS_PAD_B { B14 }
 
@@ -142,7 +141,7 @@
 #define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
 
 /* default 3V ERM vibration motor voltage and library*/
-#if FB_ERM_LRA == 0 
+#if FB_ERM_LRA == 0
 #define RATED_VOLTAGE 3
 #define V_RMS 2.3
 #define V_PEAK 3.30
@@ -193,4 +192,3 @@
 #define RGB_MATRIX_KEYPRESSES
 
 #define SOLENOID_PIN A14
-

keyboards/bpiphany/frosty_flake/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u2
 
 # Processor frequency.

keyboards/bpiphany/kitten_paw/rules.mk

@@ -1,7 +1,4 @@
-
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u2
 
 # Processor frequency.

keyboards/bpiphany/tiger_lily/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u2
 
 # Processor frequency.

keyboards/bpiphany/unloved_bastard/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u2
 
 # Processor frequency.

keyboards/bthlabs/geekpad/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.