add encoder matrix functionality

* Add RGB
* Add Plover layer

.gitignore

@@ -25,7 +25,7 @@ quantum/version.h
 CMakeLists.txt
 cmake-build-debug
 doxygen/
-.DS_STORE
+.DS_Store
 /util/wsl_downloaded
 /util/win_downloaded
 /keyboards/*/Makefile
@@ -60,8 +60,8 @@ util/Win_Check_Output.txt
 
 # ignore image files
 *.png
-*.jpg
 *.gif
+*.jpg
 
 # Do not ignore MiniDox left/right hand eeprom files
 !keyboards/minidox/*.eep

.gitmodules

@@ -11,3 +11,6 @@
 [submodule "lib/googletest"]
 	path = lib/googletest
 	url = https://github.com/google/googletest
+[submodule "lib/lufa"]
+	path = lib/lufa
+	url = https://github.com/qmk/lufa

.travis.yml

@@ -1,6 +1,5 @@
 os: linux
 dist: trusty
-sudo: required
 group: edge
 language: c
 branches:
@@ -27,7 +26,7 @@ addons:
     - diffutils
     - dos2unix
     - doxygen
-after_success:
+after_script:
   bash util/travis_compiled_push.sh
 notifications:
   webhooks:

.vscode/extensions.json

@@ -1,6 +1,11 @@
 // Suggested extensions
 {
   "recommendations": [
-    "EditorConfig.EditorConfig"
+    "EditorConfig.EditorConfig",
+    "xaver.clang-format",
+    "ms-vscode.cpptools",
+    "bierner.github-markdown-preview",
+    "donjayamanne.git-extension-pack",
+    "CoenraadS.bracket-pair-colorizer-2"
   ]
 }

.vscode/settings.json

@@ -8,10 +8,12 @@
         "**/*.hex": true
     },
     "files.associations": {
-        "*.h": "c",
-        "*.c": "c",
-        "*.cpp": "cpp",
-        "*.hpp": "cpp",
-        "xstddef": "c"
+      "*.h": "c",
+      "*.c": "c",
+      "*.cpp": "cpp",
+      "*.hpp": "cpp",
+      "xstddef": "c",
+      "type_traits": "c",
+      "utility": "c"
     }
 }

CODE_OF_CONDUCT.md

@@ -8,8 +8,17 @@ Our users, contributors, and collaborators are expected to treat each other with
 
 * The use of sexualized language or imagery
 * Unwelcome advances, sexual or otherwise
+* Deliberate intimidation, stalking, or following
 * Insults or derogatory comments, or personal or political attacks
 * Publishing others’ private information without explicit permission
+* Sustained disruption of talks or other events
 * Other conduct which could reasonably be considered inappropriate in a professional setting
+* Advocating for, or encouraging, any of the above behaviour
 
-If someone is violating this Code of Conduct you may email hello@qmk.fm to bring your concern to the Members. All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. 
+# Reporting
+
+If someone is violating this Code of Conduct, please email hello@qmk.fm or reach out to one of the Collaborators to bring it to our attention. All complaints will be reviewed and investigated.
+
+QMK will seek to use the least punitive means available to resolve an issue. If the circumstances require asking an offender to leave, we will do that.
+
+Reports will be taken and kept in strict confidence. You will not be required to confront an offender directly.

Makefile

@@ -20,7 +20,10 @@ endif
 override SILENT := false
 
 ifndef SUB_IS_SILENT
-QMK_VERSION := $(shell git describe --abbrev=0 --tags 2>/dev/null)
+ifndef SKIP_GIT
+    QMK_VERSION := $(shell git describe --abbrev=0 --tags 2>/dev/null)
+endif
+
 ifneq ($(QMK_VERSION),)
 $(info QMK Firmware $(QMK_VERSION))
 endif
@@ -94,6 +97,7 @@ $(eval $(call NEXT_PATH_ELEMENT))
 # endif
 
 define GET_KEYBOARDS
+ifndef ALT_GET_KEYBOARDS
     All_RULES_MK := $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/rules.mk))
     All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/rules.mk))
     All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/rules.mk))
@@ -105,6 +109,9 @@ define GET_KEYBOARDS
     KEYMAPS_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/*/keymaps/*/rules.mk))
 
     KEYBOARDS := $$(sort $$(filter-out $$(KEYMAPS_MK), $$(All_RULES_MK)))
+else
+    KEYBOARDS := $(shell find keyboards/ -type f -iname "rules.mk" | grep -v keymaps | sed 's!keyboards/\(.*\)/rules.mk!\1!' | sort | uniq)
+endif
 endef
 
 $(eval $(call GET_KEYBOARDS))
@@ -364,6 +371,9 @@ define PARSE_KEYBOARD
     # The same if all was specified
     else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
         $$(eval $$(call PARSE_ALL_KEYMAPS))
+    # List all keymaps for the given keyboard
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,list-keymaps),true)
+        $$(eval $$(call LIST_ALL_KEYMAPS))
     # Try to match the specified keyamp with the list of known keymaps
     else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(KEYMAPS)),true)
         $$(eval $$(call PARSE_KEYMAP,$$(MATCHED_ITEM)))
@@ -400,6 +410,16 @@ endef
 #     endif
 # endef
 
+# Prints a list of all known keymaps for the given keyboard
+define LIST_ALL_KEYMAPS
+    COMMAND_true_LIST_KEYMAPS := \
+        printf "$$(KEYMAPS)\n";
+    COMMAND_false_LIST_KEYMAPS := \
+        printf "$$(MSG_AVAILABLE_KEYMAPS)\n"; \
+        printf "$$(KEYMAPS)\n";
+    COMMANDS += LIST_KEYMAPS
+endef
+
 # $1 Keymap
 # This is the meat of compiling a keyboard, when entering this, everything is known
 # keyboard, subproject, and keymap
@@ -541,6 +561,7 @@ ifndef SKIP_GIT
 	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 1 --init lib/chibios; fi
 	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 1 --init lib/chibios-contrib; fi
 	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 1 --init lib/ugfx; fi
+	if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 1 --init lib/lufa; fi
 	git submodule status --recursive 2>/dev/null | \
 	while IFS= read -r x; do \
 		case "$$x" in \

bin/qmk

@@ -4,10 +4,8 @@
 import os
 import subprocess
 import sys
-from glob import glob
-from time import strftime
-from importlib import import_module
 from importlib.util import find_spec
+from time import strftime
 
 # Add the QMK python libs to our path
 script_dir = os.path.dirname(os.path.realpath(__file__))
@@ -15,12 +13,8 @@ qmk_dir = os.path.abspath(os.path.join(script_dir, '..'))
 python_lib_dir = os.path.abspath(os.path.join(qmk_dir, 'lib', 'python'))
 sys.path.append(python_lib_dir)
 
-# Change to the root of our checkout
-os.environ['ORIG_CWD'] = os.getcwd()
-os.chdir(qmk_dir)
-
 # Make sure our modules have been setup
-with open('requirements.txt', 'r') as fd:
+with open(os.path.join(qmk_dir, 'requirements.txt'), 'r') as fd:
     for line in fd.readlines():
         line = line.strip().replace('<', '=').replace('>', '=')
 
@@ -32,66 +26,58 @@ with open('requirements.txt', 'r') as fd:
 
         module = line.split('=')[0] if '=' in line else line
         if not find_spec(module):
-            print('Your QMK build environment is not fully setup!\n')
-            print('Please run `./util/qmk_install.sh` to setup QMK.')
+            print('Could not find module %s!', module)
+            print('Please run `pip3 install -r requirements.txt` to install the python dependencies.')
             exit(255)
 
 # Figure out our version
+# TODO(skullydazed/anyone): Find a method that doesn't involve git. This is slow in docker and on windows.
 command = ['git', 'describe', '--abbrev=6', '--dirty', '--always', '--tags']
-result = subprocess.run(command, text=True, capture_output=True)
+result = subprocess.run(command, universal_newlines=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
 
 if result.returncode == 0:
-    os.environ['QMK_VERSION'] = 'QMK ' + result.stdout.strip()
+    os.environ['QMK_VERSION'] = result.stdout.strip()
 else:
-    os.environ['QMK_VERSION'] = 'QMK ' + strftime('%Y-%m-%d-%H:%M:%S')
+    os.environ['QMK_VERSION'] = 'nogit-' + strftime('%Y-%m-%d-%H:%M:%S') + '-dirty'
 
 # Setup the CLI
 import milc
-milc.EMOJI_LOGLEVELS['INFO'] = '{fg_blue}ψ{style_reset_all}'
 
-# If we were invoked as `qmk <cmd>` massage sys.argv into `qmk-<cmd>`.
-# This means we can't accept arguments to the qmk script itself.
-script_name = os.path.basename(sys.argv[0])
-if script_name == 'qmk':
-    if len(sys.argv) == 1:
-        milc.cli.log.error('No subcommand specified!\n')
+milc.EMOJI_LOGLEVELS['INFO'] = '{fg_blue}Ψ{style_reset_all}'
 
-    if len(sys.argv) == 1 or sys.argv[1] in ['-h', '--help']:
-        milc.cli.echo('usage: qmk <subcommand> [...]')
-        milc.cli.echo('\nsubcommands:')
-        subcommands = glob(os.path.join(qmk_dir, 'bin', 'qmk-*'))
-        for subcommand in sorted(subcommands):
-            subcommand = os.path.basename(subcommand).split('-', 1)[1]
-            milc.cli.echo('\t%s', subcommand)
-        milc.cli.echo('\nqmk <subcommand> --help for more information')
+
+@milc.cli.entrypoint('QMK Helper Script')
+def qmk_main(cli):
+    """The function that gets run when no subcommand is provided.
+    """
+    cli.print_help()
+
+
+def main():
+    """Setup our environment and then call the CLI entrypoint.
+    """
+    # Change to the root of our checkout
+    os.environ['ORIG_CWD'] = os.getcwd()
+    os.chdir(qmk_dir)
+
+    # Import the subcommands
+    import qmk.cli
+
+    # Execute
+    return_code = milc.cli()
+
+    if return_code is False:
         exit(1)
 
-    if sys.argv[1] in ['-V', '--version']:
-        milc.cli.echo(os.environ['QMK_VERSION'])
-        exit(0)
+    elif return_code is not True and isinstance(return_code, int):
+        if return_code < 0 or return_code > 255:
+            milc.cli.log.error('Invalid return_code: %d', return_code)
+            exit(255)
 
-    sys.argv[0] = script_name = '-'.join((script_name, sys.argv[1]))
-    del sys.argv[1]
+        exit(return_code)
 
-# Look for which module to import
-if script_name == 'qmk':
-    milc.cli.print_help()
     exit(0)
-elif not script_name.startswith('qmk-'):
-    milc.cli.log.error('Invalid symlink, must start with "qmk-": %s', script_name)
-else:
-    subcommand = script_name.replace('-', '.').replace('_', '.').split('.')
-    subcommand.insert(1, 'cli')
-    subcommand = '.'.join(subcommand)
 
-    try:
-        import_module(subcommand)
-    except ModuleNotFoundError as e:
-        if e.__class__.__name__ != subcommand:
-            raise
-
-        milc.cli.log.error('Invalid subcommand! Could not import %s.', subcommand)
-        exit(1)
 
 if __name__ == '__main__':
-    milc.cli()
+    main()

bin/qmk-compile-json

@@ -1 +0,0 @@
-qmk

bin/qmk-doctor

@@ -1 +0,0 @@
-qmk

bin/qmk-hello

@@ -1 +0,0 @@
-qmk

bin/qmk-json-keymap

@@ -1 +0,0 @@
-qmk

bootloader.mk

@@ -19,12 +19,14 @@
 #
 # Sets the bootloader defined in the keyboard's/keymap's rules.mk
 # Current options:
-#   atmel-dfu
-#   lufa-dfu
-#   qmk-dfu
-#   halfkay
-#   caterina
-#   bootloadHID
+#
+# halfkay        PJRC Teensy
+# caterina       Pro Micro (Sparkfun/generic)
+# atmel-dfu      Atmel factory DFU
+# lufa-dfu       LUFA DFU
+# qmk-dfu        QMK DFU (LUFA + blinkenlight)
+# bootloadHID    HIDBootFlash compatible (ATmega32A)
+# USBasp         USBaspLoader (ATmega328P)
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -32,40 +34,40 @@
 ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
     OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifeq ($(strip $(MCU)), atmega32u4)
-      BOOTLOADER_SIZE = 4096
+    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+        BOOTLOADER_SIZE = 4096
     endif
     ifeq ($(strip $(MCU)), at90usb1286)
-      BOOTLOADER_SIZE = 8192
+        BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
     OPT_DEFS += -DBOOTLOADER_LUFA_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifeq ($(strip $(MCU)), atmega32u4)
-      BOOTLOADER_SIZE = 4096
+    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+        BOOTLOADER_SIZE = 4096
     endif
     ifeq ($(strip $(MCU)), at90usb1286)
-      BOOTLOADER_SIZE = 8192
+        BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
     OPT_DEFS += -DBOOTLOADER_QMK_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifeq ($(strip $(MCU)), atmega32u4)
-      BOOTLOADER_SIZE = 4096
+    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+        BOOTLOADER_SIZE = 4096
     endif
     ifeq ($(strip $(MCU)), at90usb1286)
-      BOOTLOADER_SIZE = 8192
+        BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), halfkay)
     OPT_DEFS += -DBOOTLOADER_HALFKAY
     ifeq ($(strip $(MCU)), atmega32u4)
-      BOOTLOADER_SIZE = 512
+        BOOTLOADER_SIZE = 512
     endif
     ifeq ($(strip $(MCU)), at90usb1286)
-      BOOTLOADER_SIZE = 1024
+        BOOTLOADER_SIZE = 1024
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), caterina)

build_json.mk

@@ -23,5 +23,5 @@ endif
 
 # Generate the keymap.c
 ifneq ("$(KEYMAP_JSON)","")
-    _ = $(shell test -e $(KEYMAP_C) || bin/qmk-json-keymap $(KEYMAP_JSON) -o $(KEYMAP_C))
+    _ = $(shell test -e $(KEYMAP_C) || bin/qmk json-keymap $(KEYMAP_JSON) -o $(KEYMAP_C))
 endif

common_features.mk

@@ -112,7 +112,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
     else
-        SRC += ws2812.c
+        WS2812_DRIVER_REQUIRED = yes
     endif
 endif
 
@@ -176,7 +176,7 @@ endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812)
     OPT_DEFS += -DWS2812
-    SRC += ws2812.c
+    WS2812_DRIVER_REQUIRED = yes
 endif
 
 ifeq ($(strip $(RGB_MATRIX_CUSTOM_KB)), yes)
@@ -229,13 +229,57 @@ ifeq ($(strip $(LCD_ENABLE)), yes)
     CIE1931_CURVE = yes
 endif
 
-ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
+# backward compat
+ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+    BACKLIGHT_ENABLE = custom
+endif
+
+VALID_BACKLIGHT_TYPES := yes custom
+
+BACKLIGHT_ENABLE ?= no
+ifneq ($(strip $(BACKLIGHT_ENABLE)), no)
+    ifeq ($(filter $(BACKLIGHT_ENABLE),$(VALID_BACKLIGHT_TYPES)),)
+        $(error BACKLIGHT_ENABLE="$(BACKLIGHT_ENABLE)" is not a valid backlight type)
+    endif
+
     ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
         CIE1931_CURVE = yes
     endif
-    ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+
+
+    COMMON_VPATH += $(QUANTUM_DIR)/backlight
+    SRC += $(QUANTUM_DIR)/backlight/backlight.c
+    OPT_DEFS += -DBACKLIGHT_ENABLE
+
+    ifeq ($(strip $(BACKLIGHT_ENABLE)), custom)
         OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
     endif
+
+    ifeq ($(PLATFORM),AVR)
+        SRC += $(QUANTUM_DIR)/backlight/backlight_avr.c
+    else
+        SRC += $(QUANTUM_DIR)/backlight/backlight_arm.c
+    endif
+endif
+
+VALID_WS2812_DRIVER_TYPES := bitbang pwm spi i2c
+
+WS2812_DRIVER ?= bitbang
+ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
+    ifeq ($(filter $(WS2812_DRIVER),$(VALID_WS2812_DRIVER_TYPES)),)
+        $(error WS2812_DRIVER="$(WS2812_DRIVER)" is not a valid WS2812 driver)
+    endif
+
+    ifeq ($(strip $(WS2812_DRIVER)), bitbang)
+        SRC += ws2812.c
+    else
+        SRC += ws2812_$(strip $(WS2812_DRIVER)).c
+    endif
+
+    # add extra deps
+    ifeq ($(strip $(WS2812_DRIVER)), i2c)
+        QUANTUM_LIB_SRC += i2c_master.c
+    endif
 endif
 
 ifeq ($(strip $(CIE1931_CURVE)), yes)
@@ -267,20 +311,21 @@ ifeq ($(strip $(ENCODER_ENABLE)), yes)
     OPT_DEFS += -DENCODER_ENABLE
 endif
 
-ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L)
-    COMMON_VPATH += $(DRIVER_PATH)/haptic
-    SRC += haptic.c
+HAPTIC_ENABLE ?= no
+ifneq ($(strip $(HAPTIC_ENABLE)),no)
+	COMMON_VPATH += $(DRIVER_PATH)/haptic
+	SRC += haptic.c
+	OPT_DEFS += -DHAPTIC_ENABLE
+endif
+
+ifneq ($(filter DRV2605L, $(HAPTIC_ENABLE)), )
     SRC += DRV2605L.c
     QUANTUM_LIB_SRC += i2c_master.c
-    OPT_DEFS += -DHAPTIC_ENABLE
     OPT_DEFS += -DDRV2605L
 endif
 
-ifeq ($(strip $(HAPTIC_ENABLE)), SOLENOID)
-    COMMON_VPATH += $(DRIVER_PATH)/haptic
-    SRC += haptic.c
+ifneq ($(filter SOLENOID, $(HAPTIC_ENABLE)), )
     SRC += solenoid.c
-    OPT_DEFS += -DHAPTIC_ENABLE
     OPT_DEFS += -DSOLENOID_ENABLE
 endif
 
@@ -358,3 +403,9 @@ ifeq ($(strip $(SPACE_CADET_ENABLE)), yes)
   SRC += $(QUANTUM_DIR)/process_keycode/process_space_cadet.c
   OPT_DEFS += -DSPACE_CADET_ENABLE
 endif
+
+
+ifeq ($(strip $(DIP_SWITCH_ENABLE)), yes)
+  SRC += $(QUANTUM_DIR)/dip_switch.c
+  OPT_DEFS += -DDIP_SWITCH_ENABLE
+endif

docs/ChangeLog/20190830.md

@@ -0,0 +1,53 @@
+# QMK Breaking Change - 2019 Aug 30
+
+Four times a year QMK runs a process for merging Breaking Changes. A Breaking Change is any change which modifies how QMK behaves in a way that is incompatible or potentially dangerous. We limit these changes to 4 times per year so that users can have confidence that updating their QMK tree will not break their keymaps.
+
+This document marks the inaugural Breaking Change merge. A list of changes follows.
+
+## Core code formatting with clang-format
+
+* All core files (`drivers/`, `quantum/`, `tests/`, and `tmk_core/`) have been formatted with clang-format
+* A travis process to reformat PR's on merge has been instituted
+* You can use the new CLI command `qmk cformat` to format before submitting your PR if you wish.
+
+## LUFA USB descriptor cleanup
+
+* Some code cleanups related to the USB HID descriptors on AVR keyboards, to make them easier to read and understand
+* More information: see https://github.com/qmk/qmk_firmware/pull/4871
+* No behaviour changes anticipated and no keymaps modified
+
+## Migrating `ACTION_LAYER_MOMENTARY()` entries in `fn_actions` to `MO()` keycodes
+
+* `fn_actions` is deprecated, and its functionality has been superseded by direct keycodes and `process_record_user()`
+* The end result of removing this obsolete feature should result in a decent reduction in firmware size and code complexity
+* All keymaps affected are recommended to switch away from `fn_actions` in favour of the [custom keycode](https://docs.qmk.fm/#/custom_quantum_functions) and [macro](https://docs.qmk.fm/#/feature_macros) features
+
+## Update Atreus to current code conventions
+
+* Duplicate include guards have bypassed the expected header processing behavior
+* All keymaps affected are recommended to remove duplication of `<keyboard>/config.h` to `<keyboard>/keymaps/<user>/config.h` and only provide overrides at the keymap level
+
+## Backport changes to keymap language files from ZSA fork
+
+* Fixes an issue in the `keymap_br_abnt2.h` file that includes the wrong source (`keymap_common.h` instead of `keymap.h`)
+* Updates the `keymap_swedish.h` file to be specific to swedish, and not just "nordic" in general. 
+* Any keymaps using this will need to remove `NO_*` and replace it with `SE_*`. 
+
+## Update repo to use LUFA as a git submodule
+
+* `/lib/LUFA` removed from the repo
+* LUFA set as a submodule, pointing to qmk/lufa
+* This should allow more flexibility with LUFA, and allow us to keep the sub-module up to date, a lot more easily.  It was ~2 years out of date with no easy path to fix that.  This prevents that from being an issue in the future
+  
+## Migrating `ACTION_BACKLIGHT_*()` entries in `fn_actions` to `BL_` keycodes
+
+* `fn_actions` is deprecated, and its functionality has been superseded by direct keycodes and `process_record_user()`
+* All keymaps using these actions have had the relevant `KC_FN*` keys replaced with the equivalent `BL_*` keys
+* If you currently use `KC_FN*` you will need to replace `fn_actions` with the [custom keycode](https://docs.qmk.fm/#/custom_quantum_functions) and [macro](https://docs.qmk.fm/#/feature_macros) features
+
+## Remove `KC_DELT` alias in favor of `KC_DEL`
+
+* `KC_DELT` was a redundant, undocumented alias for `KC_DELETE`
+* It has been removed and all its uses replaced with the more common `KC_DEL` alias
+* Around 90 keymaps (mostly for ErgoDox boards) have been modified as a result
+

docs/LANGS.md

@@ -1,4 +0,0 @@
-# Languages
-
-* [English](/)
-* [Chinese](zh/)

docs/_langs.md

@@ -0,0 +1,5 @@
+- Translations
+  - [:uk: English](/)
+  - [:cn: 中文](/zh-cn/)
+  - [:fr: Français](/fr-fr/)
+  - [:ru: Русский](/ru-ru/)

docs/_summary.md

@@ -9,15 +9,20 @@
 * [QMK Basics](README.md)
   * [QMK Introduction](getting_started_introduction.md)
   * [QMK CLI](cli.md)
+  * [QMK CLI Config](cli_configuration.md)
   * [Contributing to QMK](contributing.md)
   * [How to Use Github](getting_started_github.md)
   * [Getting Help](getting_started_getting_help.md)
 
+* [Breaking Changes](breaking_changes.md)
+  * [2019 Aug 30](ChangeLog/20190830.md)
+
 * [FAQ](faq.md)
   * [General FAQ](faq_general.md)
   * [Build/Compile QMK](faq_build.md)
   * [Debugging/Troubleshooting QMK](faq_debug.md)
   * [Keymap](faq_keymap.md)
+  * [Driver Installation with Zadig](driver_installation_zadig.md)
 
 * Detailed Guides
   * [Install Build Tools](getting_started_build_tools.md)
@@ -44,7 +49,7 @@
   * [Useful Functions](ref_functions.md)
   * [Configurator Support](reference_configurator_support.md)
   * [info.json Format](reference_info_json.md)
-  * [Python Development](python_development.md)
+  * [Python CLI Development](cli_development.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)
@@ -59,6 +64,7 @@
   * [Combos](feature_combo.md)
   * [Command](feature_command.md)
   * [Debounce API](feature_debounce_type.md)
+  * [DIP Switch](feature_dip_switch.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
   * [Encoders](feature_encoders.md)
   * [Grave Escape](feature_grave_esc.md)
@@ -92,6 +98,7 @@
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
   * [I2C Driver](i2c_driver.md)
+  * [WS2812 Driver](ws2812_driver.md)
   * [GPIO Controls](internals_gpio_control.md)
   * [Proton C Conversion](proton_c_conversion.md)
 
@@ -103,6 +110,7 @@
   * [Using Eclipse with QMK](other_eclipse.md)
   * [Using VSCode with QMK](other_vscode.md)
   * [Support](support.md)
+  * [How to add translations](translating.md)
 
 * QMK Internals (In Progress)
   * [Defines](internals_defines.md)

docs/arm_debugging.md

@@ -6,15 +6,15 @@ This guide is catered towards advance users and assumes you can compile an ARM c
 
 ## Installing the software
 
-The main objective here is to get the MCU Eclipse IDE correcly installed on our machine. The necesarry instructions are derived from [this](https://gnu-mcu-eclipse.github.io/install/) install guide.
+The main objective here is to get the MCU Eclipse IDE correctly installed on our machine. The necessary instructions are derived from [this](https://gnu-mcu-eclipse.github.io/install/) install guide.
 
 ### The xPack Manager
 
-This tool is a software package manager and it is used to help us get the necesarry depencencies.
+This tool is a software package manager and it is used to help us get the necessary dependencies.
 
-XPM runs using Node.js so grab that form [here](https://nodejs.org/en/). After installation, open a terminal and type `npm -v`. A reply with the version number means that the instalation was successful.
+XPM runs using Node.js so grab that from [here](https://nodejs.org/en/). After installation, open a terminal and type `npm -v`. A reply with the version number means that the installation was successful.
 
-XPM instalation instructions can be found [here](https://www.npmjs.com/package/xpm) and are OS specific. Entering `xpm --version` to your terminal should return the software version.
+XPM installation instructions can be found [here](https://www.npmjs.com/package/xpm) and are OS specific. Entering `xpm --version` to your terminal should return the software version.
 
 ### The ARM Toolchain
 
@@ -26,10 +26,10 @@ If you are using windows you need to install this!
 
 `xpm install --global @gnu-mcu-eclipse/windows-build-tools`
 
-### Programer/Debugger Drivers
+### Programmer/Debugger Drivers
 
-Now its the time to install your programer's drivers. This tutorial was made using an ST-Link v2 which you can get from almost anywhere.
-If you have an ST-Link the drivers can be found [here](https://www.st.com/en/development-tools/stsw-link009.html) otherwise consult the manufuturer of your tool.
+Now it's time to install your programmer's drivers. This tutorial was made using an ST-Link v2 which you can get from almost anywhere.
+If you have an ST-Link the drivers can be found [here](https://www.st.com/en/development-tools/stsw-link009.html) otherwise consult the manufacturer of your tool.
 
 ### OpenOCD
 
@@ -84,4 +84,4 @@ Reset your keyboard.
 Press the bug icon and if all goes well you should soon find yourself in the debug perspective. Here the program counter will pause at the beginning of the main function and way for you to press Play. Most of the features of all debuggers work on ARM MCUs but for exact details google is your friend!
 
 
-Happy debugging!
+Happy debugging!

docs/breaking_changes.md

@@ -0,0 +1,107 @@
+# Breaking Changes
+
+This document describes QMK's Breaking Change process. A Breaking Change is any change which modifies how QMK behaves in a way that in incompatible or potentially dangerous. We limit these changes so that users can have confidence that updating their QMK tree will not break their keymaps.
+
+The breaking change period is when we will merge PR's that change QMK in dangerous or unexpected ways. There is a built-in period of testing so we are confident that any problems caused are rare or unable to be predicted.
+
+## What has been included in past Breaking Changes?
+
+* [2019 Aug 30](ChangeLog/20190830.md)
+
+## When is the next Breaking Change?
+
+The next Breaking Change is scheduled for Nov 29.
+
+### Important Dates
+
+* [x] 2019 Sep 21 - `future` is created. It will be rebased weekly.
+* [ ] 2019 Nov 01 - `future` closed to new PR's.
+* [ ] 2019 Nov 01 - Call for testers.
+* [ ] 2019 Nov 27 - `master` is locked, no PR's merged.
+* [ ] 2019 Nov 29 - Merge `future` to `master`.
+* [ ] 2019 Nov 30 - `master` is unlocked. PR's can be merged again.
+
+## What changes will be included?
+
+To see a list of breaking change candidates you can look at the [`breaking_change` label](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+label%3Abreaking_change+is%3Apr). New changes might be added between now and when `future` is closed, and a PR with that label applied is not guaranteed to be merged.
+
+If you want your breaking change to be included in this round you need to create a PR with the `breaking_change` label and have it accepted before `future` closes. After `future` closes no new breaking changes will be accepted.
+
+Criteria for acceptance:
+
+* PR is complete and ready to merge
+* PR has a ChangeLog
+
+# Checklists
+
+This section documents various processes we use when running the Breaking Changes process.
+
+## Rebase `future` from `master`
+
+This is run every Friday while `future` is open.
+
+Process:
+
+```
+cd qmk_firmware
+git checkout master
+git pull --ff-only
+git checkout future
+git rebase master
+git push --force
+```
+
+## Creating the `future` branch
+
+This happens immediately after the previous `future` branch is merged.
+
+* `qmk_firmware` git commands
+    * [ ] `git checkout master`
+    * [ ] `git pull --ff-only`
+    * [ ] `git checkout -b future`
+    * [ ] Edit `readme.md`
+        * [ ] Add a big notice at the top that this is a testing branch.
+        * [ ] Include a link to this document
+    * [ ] `git commit -m 'Branch point for <DATE> Breaking Change'`
+    * [ ] `git tag breakpoint_<YYYY>_<MM>_<DD>`
+    * [ ] `git tag <next_version>` # Prevent the breakpoint tag from confusing version incrementing
+    * [ ] `git push origin future`
+    * [ ] `git push --tags`
+
+## 4 Weeks Before Merge
+
+* `future` is now closed to new PR's, only fixes for current PR's may be merged
+* Post call for testers
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## 1 Week Before Merge
+
+* Announce that master will be closed from <2 Days Before> to <Day of Merge>
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## 2 Days Before Merge
+
+* Announce that master is closed for 2 days
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## Day Of Merge
+
+* `qmk_firmware` git commands
+    * [ ] `git checkout future`
+    * [ ] `git pull --ff-only`
+    * [ ] `git rebase origin/master`
+    * [ ] Edit `readme.md`
+        * [ ] Remove the notes about `future`
+    * [ ] Roll up the ChangeLog into one file.
+    * [ ] `git commit -m 'Merge point for <DATE> Breaking Change'`
+    * [ ] `git push origin future`
+* Github Actions
+    * [ ] Create a PR for `future`
+    * [ ] Make sure travis comes back clean
+    * [ ] Merge `future` PR

docs/cli.md

@@ -4,28 +4,173 @@ This page describes how to setup and use the QMK CLI.
 
 # Overview
 
-The QMK CLI makes building and working with QMK keyboards easier. We have provided a number of commands to help you work with QMK:
+The QMK CLI makes building and working with QMK keyboards easier. We have provided a number of commands to simplify and streamline tasks such as obtaining and compiling the QMK firmware, creating keymaps, and more.
 
-* `qmk compile-json`
+* [Global CLI](#global-cli)
+* [Local CLI](#local-cli)
+* [CLI Commands](#cli-commands)
 
-# Setup
+# Requirements
 
-Simply add the `qmk_firmware/bin` directory to your `PATH`. You can run the `qmk` commands from any directory.
+The CLI requires Python 3.5 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt).
+
+# Global CLI
+
+QMK provides an installable CLI that can be used to setup your QMK build environment, work with QMK, and which makes working with multiple copies of `qmk_firmware` easier. We recommend installing and updating this periodically.
+
+## Install Using Homebrew (macOS, some Linux)
+
+If you have installed [Homebrew](https://brew.sh) you can tap and install QMK:
 
 ```
-export PATH=$PATH:$HOME/qmk_firmware/bin
+brew tap qmk/qmk
+brew install qmk
+export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
+qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```
 
-You may want to add this to your `.profile`, `.bash_profile`, `.zsh_profile`, or other shell startup scripts.
+## Install Using easy_install or pip
 
-# Commands
+If your system is not listed above you can install QMK manually. First ensure that you have python 3.5 (or later) installed and have installed pip. Then install QMK with this command:
 
-## `qmk compile-json`
+```
+pip3 install qmk
+export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
+qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
+```
 
-This command allows you to compile JSON files you have downloaded from <https://config.qmk.fm>.
+## Packaging For Other Operating Systems
+
+We are looking for people to create and maintain a `qmk` package for more operating systems. If you would like to create a package for your OS please follow these guidelines:
+
+* Follow best practices for your OS when they conflict with these guidelines
+    * Document why in a comment when you do deviate
+* Install using a virtualenv
+* Instruct the user to set the environment variable `QMK_HOME` to have the firmware source checked out somewhere other than `~/qmk_firmware`.
+
+# Local CLI
+
+If you do not want to use the global CLI there is a local CLI bundled with `qmk_firmware`. You can find it in `qmk_firmware/bin/qmk`. You can run the `qmk` command from any directory and it will always operate on that copy of `qmk_firmware`.
+
+**Example**:
+
+```
+$ ~/qmk_firmware/bin/qmk hello
+Ψ Hello, World!
+```
+
+## Local CLI Limitations
+
+There are some limitations to the local CLI compared to the global CLI:
+
+* The local CLI does not support `qmk setup` or `qmk clone`
+* The local CLI always operates on the same `qmk_firmware` tree, even if you have multiple repositories cloned.
+* The local CLI does not run in a virtualenv, so it's possible that dependencies will conflict
+
+# CLI Commands
+
+## `qmk cformat`
+
+This command formats C code using clang-format. Run it with no arguments to format all core code, or pass filenames on the command line to run it on specific files.
 
 **Usage**:
 
 ```
-qmk compile-json mine.json
+qmk cformat [file1] [file2] [...] [fileN]
+```
+
+## `qmk compile`
+
+This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm> or compile keymaps in the repo.
+
+**Usage for Configurator Exports**:
+
+```
+qmk compile <configuratorExport.json>
+```
+
+**Usage for Keymaps**:
+
+```
+qmk compile -kb <keyboard_name> -km <keymap_name>
+```
+
+## `qmk config`
+
+This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
+
+**Usage**:
+
+```
+qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
+```
+
+## `qmk docs`
+
+This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936.
+
+**Usage**:
+
+```
+qmk docs [-p PORT]
+```
+
+## `qmk doctor`
+
+This command examines your environment and alerts you to potential build or flash problems.
+
+**Usage**:
+
+```
+qmk doctor
+```
+
+## `qmk json-keymap`
+
+Creates a keymap.c from a QMK Configurator export.
+
+**Usage**:
+
+```
+qmk json-keymap [-o OUTPUT] filename
+```
+
+## `qmk list-keyboards`
+
+This command lists all the keyboards currently defined in `qmk_firmware`
+
+**Usage**:
+
+```
+qmk list-keyboards
+```
+
+## `qmk new-keymap`
+
+This command creates a new keymap based on a keyboard's existing default keymap.
+
+**Usage**:
+
+```
+qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
+```
+
+## `qmk pyformat`
+
+This command formats python code in `qmk_firmware`.
+
+**Usage**:
+
+```
+qmk pyformat
+```
+
+## `qmk pytest`
+
+This command runs the python test suite. If you make changes to python code you should ensure this runs successfully.
+
+**Usage**:
+
+```
+qmk pytest
 ```

docs/cli_configuration.md

@@ -0,0 +1,121 @@
+# QMK CLI Configuration
+
+This document explains how `qmk config` works.
+
+# Introduction
+
+Configuration for QMK CLI is a key/value system. Each key consists of a subcommand and an argument name separated by a period. This allows for a straightforward and direct translation between config keys and the arguments they set.
+
+## Simple Example
+
+As an example let's look at the command `qmk compile --keyboard clueboard/66/rev4 --keymap default`.
+
+There are two command line arguments that could be read from configuration instead:
+
+* `compile.keyboard`
+* `compile.keymap`
+
+Let's set these now:
+
+```
+$ qmk config compile.keyboard=clueboard/66/rev4 compile.keymap=default
+compile.keyboard: None -> clueboard/66/rev4
+compile.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+Now I can run `qmk compile` without specifying my keyboard and keymap each time.
+
+## Setting User Defaults
+
+Sometimes you want to share a setting between multiple commands. For example, multiple commands take the argument `--keyboard`. Rather than setting this value for every command you can set a user value which will be used by any command that takes that argument.
+
+Example:
+
+```
+$ qmk config user.keyboard=clueboard/66/rev4 user.keymap=default
+user.keyboard: None -> clueboard/66/rev4
+user.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+# CLI Documentation (`qmk config`)
+
+The `qmk config` command is used to interact with the underlying configuration. When run with no argument it shows the current configuration. When arguments are supplied they are assumed to be configuration tokens, which are strings containing no spaces with the following form:
+
+    <subcommand|general|default>[.<key>][=<value>]
+
+## Setting Configuration Values
+
+You can set configuration values by putting an equal sign (=) into your config key. The key must always be the full `<section>.<key>` form.
+
+Example:
+
+```
+$ qmk config default.keymap=default
+default.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+## Reading Configuration Values
+
+You can read configuration values for the entire configuration, a single key, or for an entire section. You can also specify multiple keys to display more than one value.
+
+### Entire Configuration Example
+
+    qmk config
+
+### Whole Section Example
+
+    qmk config compile
+
+### Single Key Example
+
+    qmk config compile.keyboard
+
+### Multiple Keys Example
+
+    qmk config user compile.keyboard compile.keymap
+
+## Deleting Configuration Values
+
+You can delete a configuration value by setting it to the special string `None`.
+
+Example:
+
+```
+$ qmk config default.keymap=None
+default.keymap: default -> None
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+## Multiple Operations
+
+You can combine multiple read and write operations into a single command. They will be executed and displayed in order:
+
+```
+$ qmk config compile default.keymap=default compile.keymap=None
+compile.keymap=skully
+compile.keyboard=clueboard/66_hotswap/gen1
+default.keymap: None -> default
+compile.keymap: skully -> None
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+# User Configuration Options
+
+| Key | Default Value | Description |
+|-----|---------------|-------------|
+| user.keyboard | None | The keyboard path (Example: `clueboard/66/rev4`) |
+| user.keymap | None | The keymap name (Example: `default`) |
+| user.name | None | The user's github username. |
+
+# All Configuration Options
+
+| Key | Default Value | Description |
+|-----|---------------|-------------|
+| compile.keyboard | None | The keyboard path (Example: `clueboard/66/rev4`) |
+| compile.keymap | None | The keymap name (Example: `default`) |
+| hello.name | None | The name to greet when run. |
+| new_keyboard.keyboard | None | The keyboard path (Example: `clueboard/66/rev4`) |
+| new_keyboard.keymap | None | The keymap name (Example: `default`) |

docs/cli_development.md

@@ -0,0 +1,175 @@
+# QMK CLI Development
+
+This document has useful information for developers wishing to write new `qmk` subcommands.
+
+# Overview
+
+The QMK CLI operates using the subcommand pattern made famous by git. The main `qmk` script is simply there to setup the environment and pick the correct entrypoint to run. Each subcommand is a self-contained module with an entrypoint (decorated by `@cli.subcommand()`) that performs some action and returns a shell returncode, or None.
+
+# Subcommands
+
+[MILC](https://github.com/clueboard/milc) is the CLI framework `qmk` uses to handle argument parsing, configuration, logging, and many other features. It lets you focus on writing your tool without wasting your time writing glue code.
+
+Subcommands in the local CLI are always found in `qmk_firmware/lib/python/qmk/cli`.
+
+Let's start by looking at an example subcommand. This is `lib/python/qmk/cli/hello.py`:
+
+```python
+"""QMK Python Hello World
+
+This is an example QMK CLI script.
+"""
+from milc import cli
+
+
+@cli.argument('-n', '--name', default='World', help='Name to greet.')
+@cli.subcommand('QMK Hello World.')
+def hello(cli):
+    """Log a friendly greeting.
+    """
+    cli.log.info('Hello, %s!', cli.config.hello.name)
+```
+
+First we import the `cli` object from `milc`. This is how we interact with the user and control the script's behavior. We use `@cli.argument()` to define a command line flag, `--name`. This also creates a configuration variable named `hello.name` (and the corresponding `user.name`) which the user can set so they don't have to specify the argument. The `cli.subcommand()` decorator designates this function as a subcommand. The name of the subcommand will be taken from the name of the function.
+
+Once inside our function we find a typical "Hello, World!" program. We use `cli.log` to access the underlying [Logger Object](https://docs.python.org/3.5/library/logging.html#logger-objects), whose behavior is user controllable. We also access the value for name supplied by the user as `cli.config.hello.name`. The value for `cli.config.hello.name` will be determined by looking at the `--name` argument supplied by the user, if not provided it will use the value in the `qmk.ini` config file, and if neither of those is provided it will fall back to the default supplied in the `cli.argument()` decorator.
+
+# User Interaction
+
+MILC and the QMK CLI have several nice tools for interacting with the user. Using these standard tools will allow you to colorize your text for easier interactions, and allow the user to control when and how that information is displayed and stored.
+
+## Printing Text
+
+There are two main methods for outputting text in a subcommand- `cli.log` and `cli.echo()`. They operate in similar ways but you should prefer to use `cli.log.info()` for most general purpose printing.
+
+You can use special tokens to colorize your text, to make it easier to understand the output of your program. See [Colorizing Text](#colorizing-text) below.
+
+Both of these methods support built-in string formatting using python's [printf style string format operations](https://docs.python.org/3.5/library/stdtypes.html#old-string-formatting). You can use tokens such as `%s` and `%d` within your text strings then pass the values as arguments. See our Hello, World program above for an example.
+
+You should never use the format operator (`%`) directly, always pass values as arguments.
+
+### Logging (`cli.log`)
+
+The `cli.log` object gives you access to a [Logger Object](https://docs.python.org/3.5/library/logging.html#logger-objects). We have configured our log output to show the user a nice emoji for each log level (or the log level name if their terminal does not support unicode.) This way the user can tell at a glance which messages are most important when something goes wrong.
+
+The default log level is `INFO`. If the user runs `qmk -v <subcommand>` the default log level will be set to `DEBUG`.
+
+| Function | Emoji |
+|----------|-------|
+| cli.log.critical | `{bg_red}{fg_white}¬_¬{style_reset_all}` |
+| cli.log.error | `{fg_red}☒{style_reset_all}` |
+| cli.log.warning | `{fg_yellow}⚠{style_reset_all}` |
+| cli.log.info | `{fg_blue}Ψ{style_reset_all}` |
+| cli.log.debug | `{fg_cyan}☐{style_reset_all}` |
+| cli.log.notset | `{style_reset_all}¯\\_(o_o)_/¯` |
+
+### Printing (`cli.echo`)
+
+Sometimes you simply need to print text outside of the log system. This is appropriate if you are outputting fixed data or writing out something that should never be logged. Most of the time you should prefer `cli.log.info()` over `cli.echo`.
+
+### Colorizing Text
+
+You can colorize the output of your text by including color tokens within text. Use color to highlight, not to convey information. Remember that the user can disable color, and your subcommand should still be usable if they do.
+
+You should generally avoid setting the background color, unless it's integral to what you are doing. Remember that users have a lot of preferences when it comes to their terminal color, so you should pick colors that work well against both black and white backgrounds.
+
+Colors prefixed with 'fg' will affect the foreground (text) color. Colors prefixed with 'bg' will affect the background color.
+
+| Color | Background | Extended Background | Foreground | Extended Foreground|
+|-------|------------|---------------------|------------|--------------------|
+| Black | {bg_black} | {bg_lightblack_ex} | {fg_black} | {fg_lightblack_ex} |
+| Blue | {bg_blue} | {bg_lightblue_ex} | {fg_blue} | {fg_lightblue_ex} |
+| Cyan | {bg_cyan} | {bg_lightcyan_ex} | {fg_cyan} | {fg_lightcyan_ex} |
+| Green | {bg_green} | {bg_lightgreen_ex} | {fg_green} | {fg_lightgreen_ex} |
+| Magenta | {bg_magenta} | {bg_lightmagenta_ex} | {fg_magenta} | {fg_lightmagenta_ex} |
+| Red | {bg_red} | {bg_lightred_ex} | {fg_red} | {fg_lightred_ex} |
+| White | {bg_white} | {bg_lightwhite_ex} | {fg_white} | {fg_lightwhite_ex} |
+| Yellow | {bg_yellow} | {bg_lightyellow_ex} | {fg_yellow} | {fg_lightyellow_ex} |
+
+There are also control sequences that can be used to change the behavior of
+ANSI output:
+
+| Control Sequences | Description |
+|-------------------|-------------|
+| {style_bright} | Make the text brighter |
+| {style_dim} | Make the text dimmer |
+| {style_normal} | Make the text normal (neither `{style_bright}` nor `{style_dim}`) |
+| {style_reset_all} | Reset all text attributes to default. (This is automatically added to the end of every string.) |
+| {bg_reset} | Reset the background color to the user's default |
+| {fg_reset} | Reset the foreground color to the user's default |
+
+# Arguments and Configuration
+
+QMK handles the details of argument parsing and configuration for you. When you add a new argument it is automatically incorporated into the config tree based on your subcommand's name and the long name of the argument. You can access this configuration in `cli.config`, using either attribute-style access (`cli.config.<subcommand>.<argument>`) or dictionary-style access (`cli.config['<subcommand>']['<argument>']`).
+
+Under the hood QMK uses [ConfigParser](https://docs.python.org/3/library/configparser.html) to store configurations. This gives us an easy and straightforward way to represent the configuration in a human-editable way. We have wrapped access to this configuration to provide some nicities that ConfigParser does not normally have.
+
+## Reading Configuration Values
+
+You can interact with `cli.config` in all the ways you'd normally expect. For example the `qmk compile` command gets the keyboard name from `cli.config.compile.keyboard`. It does not need to know whether that value came from the command line, an environment variable, or the configuration file.
+
+Iteration is also supported:
+
+```
+for section in cli.config:
+    for key in cli.config[section]:
+        cli.log.info('%s.%s: %s', section, key, cli.config[section][key])
+```
+
+## Setting Configuration Values
+
+You can set configuration values in the usual ways.
+
+Dictionary style:
+
+```
+cli.config['<section>']['<key>'] = <value>
+```
+
+Attribute style:
+
+```
+cli.config.<section>.<key> = <value>
+```
+
+## Deleting Configuration Values
+
+You can delete configuration values in the usual ways.
+
+Dictionary style:
+
+```
+del(cli.config['<section>']['<key>'])
+```
+
+Attribute style:
+
+```
+del(cli.config.<section>.<key>)
+```
+
+## Writing The Configuration File
+
+The configuration is not written out when it is changed. Most commands do not need to do this. We prefer to have the user change their configuration deliberitely using `qmk config`.
+
+You can use `cli.save_config()` to write out the configuration.
+
+## Excluding Arguments From Configuration
+
+Some arguments should not be propagated to the configuration file. These can be excluded by adding `arg_only=True` when creating the argument.
+
+Example:
+
+```
+@cli.argument('-o', '--output', arg_only=True, help='File to write to')
+@cli.argument('filename', arg_only=True, help='Configurator JSON file')
+@cli.subcommand('Create a keymap.c from a QMK Configurator export.')
+def json_keymap(cli):
+    pass
+```
+
+You will only be able to access these arguments using `cli.args`. For example:
+
+```
+cli.log.info('Reading from %s and writing to %s', cli.args.filename, cli.args.output)
+```

docs/coding_conventions_c.md

@@ -31,17 +31,17 @@ Here is an example for easy reference:
 ```c
 /* Enums for foo */
 enum foo_state {
-  FOO_BAR,
-  FOO_BAZ,
+    FOO_BAR,
+    FOO_BAZ,
 };
 
 /* Returns a value */
 int foo(void) {
-  if (some_condition) {
-    return FOO_BAR;
-  } else {
-    return -1;
-  }
+    if (some_condition) {
+        return FOO_BAR;
+    } else {
+        return -1;
+    }
 }
 ```
 

docs/config_options.md

@@ -76,7 +76,7 @@ This is a C header file that is one of the first things included, and will persi
 * `#define B7_AUDIO`
   * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define BACKLIGHT_PIN B7`
-  * pin of the backlight - `B5`, `B6`, `B7` and `C6` (and `D4` on ATmega32A) use hardware PWM, others use software implementation
+  * pin of the backlight
 * `#define BACKLIGHT_LEVELS 3`
   * number of levels your backlight will have (maximum 15 excluding off)
 * `#define BACKLIGHT_BREATHING`
@@ -91,8 +91,10 @@ This is a C header file that is one of the first things included, and will persi
   * tries to keep switch state consistent with keyboard LED state
 * `#define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)`
   * key combination that allows the use of magic commands (useful for debugging)
-* `#define USB_MAX_POWER_CONSUMPTION`
+* `#define USB_MAX_POWER_CONSUMPTION 500`
   * sets the maximum power (in mA) over USB for the device (default: 500)
+* `#define USB_POLLING_INTERVAL_MS 10`
+  * sets the USB polling rate in milliseconds for the keyboard, mouse, and shared (NKRO/media keys) interfaces
 * `#define F_SCL 100000L`
   * sets the I2C clock rate speed for keyboards using I2C. The default is `400000L`, except for keyboards using `split_common`, where the default is `100000L`.
 
@@ -222,6 +224,7 @@ There are a few different ways to set handedness for split keyboards (listed in
 2. Set `EE_HANDS` and flash `eeprom-lefthand.eep`/`eeprom-righthand.eep` to each half
    * For boards with DFU bootloader you can use `:dfu-split-left`/`:dfu-split-right` to flash these EEPROM files
    * For boards with Caterina bootloader (like stock Pro Micros), use `:avrdude-split-left`/`:avrdude-split-right`
+   * For boards with ARM DFU bootloader (like Proton C), use `:dfu-util-split-left`/`:dfu-util-split-right`
 3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
 4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
 
@@ -248,6 +251,9 @@ There are a few different ways to set handedness for split keyboards (listed in
 * `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
   * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.
 
+* `#define DIRECT_PINS_RIGHT { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }`
+  * If you want to specify a different direct pinout for the right half than the left half, you can define `DIRECT_PINS_RIGHT`. Currently, the size of `DIRECT_PINS` must be the same as `DIRECT_PINS_RIGHT`.
+
 * `#define RGBLED_SPLIT { 6, 6 }`
   * See [RGB Light Configuration](#rgb-light-configuration)
 
@@ -261,6 +267,14 @@ There are a few different ways to set handedness for split keyboards (listed in
     * 4: about 26kbps
     * 5: about 20kbps
 
+* `#define SPLIT_USB_DETECT`
+  * Detect (with timeout) USB connection when delegating master/slave
+  * Default behavior for ARM
+  * Required for AVR Teensy
+
+* `#define SPLIT_USB_TIMEOUT 2500`
+  * Maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.
@@ -296,13 +310,13 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
 Use these to enable or disable building certain features. The more you have enabled the bigger your firmware will be, and you run the risk of building a firmware too large for your MCU.
 
 * `BOOTMAGIC_ENABLE`
-  * Virtual DIP switch configuration(+1000)
+  * Virtual DIP switch configuration
 * `MOUSEKEY_ENABLE`
-  * Mouse keys(+4700)
+  * Mouse keys
 * `EXTRAKEY_ENABLE`
-  * Audio control and System control(+450)
+  * Audio control and System control
 * `CONSOLE_ENABLE`
-  * Console for debug(+400)
+  * Console for debug
 * `COMMAND_ENABLE`
   * Commands for debug and configuration
 * `COMBO_ENABLE`
@@ -334,7 +348,7 @@ Use these to enable or disable building certain features. The more you have enab
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
 * `LINK_TIME_OPTIMIZATION_ENABLE`
-  = Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` 
+  = Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`
 
 ## USB Endpoint Limitations
 

docs/contributing.md

@@ -63,11 +63,11 @@ Most of our style is pretty easy to pick up on. If you are familiar with either
 
 We have a few different types of changes in QMK, each requiring a different level of rigor. We'd like you to keep the following guidelines in mind no matter what type of change you're making.
 
-* Separate PR's into logical units. For example, do not submit one PR covering two separate features, instead submit a separate PR for each feature.
+* Separate PRs into logical units. For example, do not submit one PR covering two separate features, instead submit a separate PR for each feature.
 * Check for unnecessary whitespace with `git diff --check` before committing.
 * Make sure your code change actually compiles.
-  * Keymaps: Make sure that `make keyboard:your_new_keymap` does not return an error
-  * Keyboards: Make sure that `make keyboard:all` does not return any errors
+  * Keymaps: Make sure that `make keyboard:your_new_keymap` does not return any errors.
+  * Keyboards: Make sure that `make keyboard:all` does not return any errors.
   * Core: Make sure that `make all` does not return any errors.
 * Make sure commit messages are understandable on their own. You should put a short description (no more than 70 characters) on the first line, the second line should be empty, and on the 3rd and later lines you should describe your commit in detail, if required. Example:
 
@@ -79,6 +79,8 @@ The kerpleplork was intermittently failing with error code 23. The root cause wa
 Limited experimentation on the devices I have available shows that 7 is high enough to avoid confusing the kerpleplork, but I'd like to get some feedback from people with ARM devices to be sure.
 ```
 
+!> **IMPORTANT:** If you would like to contribute a bugfix or improvement to user code, such as non-default keymaps, userspace and layouts, be sure to tag the original submitter of the code in your PR. Many users, regardless of skill level with Git and GitHub, may be confused or frustrated at their code being modified without their knowledge.
+
 ## Documentation
 
 Documentation is one of the easiest ways to get started contributing to QMK. Finding places where the documentation is wrong or incomplete and fixing those is easy! We also very badly need someone to edit our documentation, so if you have editing skills but aren't sure where or how to jump in please [reach out for help](#where-can-i-go-for-help)!

docs/custom_quantum_functions.md

@@ -297,8 +297,8 @@ This runs code every time that the layers get changed.  This can be useful for l
 This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
-    switch (biton32(state)) {
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
     case _RAISE:
         rgblight_setrgb (0x00,  0x00, 0xFF);
         break;
@@ -320,8 +320,8 @@ uint32_t layer_state_set_user(uint32_t state) {
 ```
 ### `layer_state_set_*` Function Documentation
 
-* Keyboard/Revision: `uint32_t layer_state_set_kb(uint32_t state)`
-* Keymap: `uint32_t layer_state_set_user(uint32_t state)`
+* Keyboard/Revision: `layer_state_t layer_state_set_kb(layer_state_t state)`
+* Keymap: `layer_state_t layer_state_set_user(layer_state_t state)`
 
 
 The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)
@@ -377,8 +377,8 @@ void keyboard_post_init_user(void) {
 The above function will use the EEPROM config immediately after reading it, to set the default layer's RGB color. The "raw" value of it is converted in a usable structure based on the "union" that you created above. 
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
-    switch (biton32(state)) {
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
     case _RAISE:
         if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); }
         break;

docs/de/cli.md

@@ -0,0 +1,169 @@
+# QMK CLI (Kommandozeile)
+
+Diese Seite beschreibt die Einrichtung und den Umgang mit dem QMK CLI (Kommandozeile).
+
+# Übersicht
+
+Die QMK CLI vereinfacht das Zusammenbauen und Arbeiten mit QMK Tastaturen. Hier findest Du wichtige Befehle, um beispielsweise das Herunterladen und Kompilieren der QMK Firmware oder das Erstellen von Tastaturbelegungen (und vieles mehr) zu erleichtern.
+
+* [Globale CLI](#globale-cli)
+* [Lokale CLI](#lokale-cli)
+* [CLI-Befehle](#cli-befehle)
+
+# System-Anforderungen
+
+Die CLI benötigt Python 3.5 oder höher. Außerdem ist es nötig, die Packages laut [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt) zu installieren.
+
+# Globale CLI
+
+QMK bietet ein installierbares CLI, das Du zum Einrichten Deiner QMK Build-Umgebung verwenden kannst. Dieses ermöglicht Dir das Arbeiten mit QMK, und erleichtert das Arbeiten mit mehreren Kopien der `qmk_firmware`. Wir empfehlen, dieses CLI zu installieren und regelmäßig upzudaten.
+
+## Installation mit Homebrew (macOS, manche Linux)
+
+Solltest Du [Homebrew](https://brew.sh) installiert haben, kannst Du QMK per tap installieren:
+
+```
+brew tap qmk/qmk
+brew install qmk
+export QMK_HOME='~/qmk_firmware' # Optional: setzt den Installationsort für `qmk_firmware`
+qmk setup  # Dies klont `qmk/qmk_firmware` und richtet optional auch Deine Build-Umgebung ein
+```
+
+## Installation mit easy_install oder pip
+
+Falls Du kein Homebrew hast, kannst Du QMK auch manuell installieren. Zuerst musst Du sicherstellen, dass Python 3.5 (oder höher) und pip installiert ist. Dann installiere QMK mit diesem Befehl:
+
+```
+pip3 install qmk
+export QMK_HOME='~/qmk_firmware' # Optional: setzt den Installationsort für `qmk_firmware`
+qmk setup  # Dies klont `qmk/qmk_firmware` und richtet optional auch Deine Build-Umgebung ein
+```
+## Installation mit git Repo
+
+`git clone https://github.com/qmk/qmk_cli.git && cd qmk_cli && python3 setup.py install`
+
+## Packaging für andere Betriebssysteme
+
+Wir suchen nach Freiwilligen, die ein `qmk`-Package für weitere Betriebssysteme erstellen und pflegen. Falls Du ein Package für Dein OS erstellen möchtest, bitte befolge diese Richtlinien:
+
+* Verwende "Best Practices" für Dein OS, sollten sie mit diesen Richtlinien in Konflikt stehen.
+    * Dokumentiere den Grund in einem Kommentar, wenn Du abweichen musstest.
+* Installiere mit einem [virtualenv](https://virtualenv.pypa.io/en/latest/).
+* Weise den User an, die Umgebungs-Variable `QMK_HOME` zu setzen, um die Firmware-Quelle anders einzustellen als `~/qmk_firmware`.
+
+# Lokale CLI
+
+Wenn Du die globale CLI nicht verwenden möchtest, beinhaltet `qmk_firmware` auch eine lokale CLI. Du kannst sie hier finden: `qmk_firmware/bin/qmk`. Du kannst den `qmk`-Befehl aus irgendeinem Datei-Verzeichnis ausführen und es wird immer auf dieser Kopie von `qmk_firmware` arbeiten.
+
+**Beispiel**:
+
+```
+$ ~/qmk_firmware/bin/qmk hello
+Ψ Hello, World!
+```
+
+## Einschränkungen der lokalen CLI
+
+Hier ein Vergleich mit der globalen CLI:
+
+* Die lokale CLI unterstützt kein `qmk setup` oder `qmk clone`.
+* Die lokale CLI arbeitet immer innerhalb der selben `qmk_firmware`-Verzeichnisstruktur, auch wenn Du mehrere Repositories geklont hast.
+* Die lokale CLI läuft nicht in einer virtualenv. Daher ist es möglich, dass Abhängigkeiten (dependencies) miteinander in Konflikt kommen/stehen.
+
+# CLI-Befehle
+
+## `qmk compile`
+
+Dieser Befehl erlaubt es dir, die Firmware - aus egal welchem Datei-Verzeichnis - zu compilen. Du kannst JSON-Exporte von <https://config.qmk.fm> oder Keymaps in der Repo kompilen.
+
+**Anwendung für Konfigurations-Exports**:
+
+```
+qmk compile <configuratorExport.json>
+```
+
+**Anwendung für Keymaps**:
+
+```
+qmk compile -kb <keyboard_name> -km <keymap_name>
+```
+
+## `qmk cformat`
+
+Dieser Befehl formatiert C-Code im clang-Format. Benutze ihn ohne Argumente, um den core-Code zu formatieren, oder benutze Namen von Dateien in der CLI, um den Befehl auf bestimmte Dateien anzuwenden.
+
+**Anwendung**:
+
+```
+qmk cformat [file1] [file2] [...] [fileN]
+```
+
+## `qmk config`
+
+Dieser Befehl konfiguriert das Verhalten von QMK. Für die volle `qmk config`-Dokumentation gehe zu [CLI-Konfiguration](cli_configuration.md).
+
+**Anwendung**:
+
+```
+qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
+```
+
+## `qmk docs`
+
+Dieser Befehl startet einen lokalen HTTP-Server, den Du zum Browsen oder Verbessern der Dokumentation verwenden kannst. Der Default-Port ist 8936.
+
+**Anwendung**:
+
+```
+qmk docs [-p PORT]
+```
+
+## `qmk doctor`
+
+Dieser Befehl untersucht Deine Umgebung und warnt Dich vor potentiellen Build- oder Flash-Problemen.
+
+**Anwendung**:
+
+```
+qmk doctor
+```
+
+## `qmk list-keyboards`
+
+Dieser Befehl listet alle zurzeit in `qmk_firmware` definierten Tastaturen/Keyboards auf.
+
+**Anwendung**:
+
+```
+qmk list-keyboards
+```
+
+## `qmk new-keymap`
+
+Dieser Befehl erstellt eine neue Keymap basierend auf einer existierenden Standard-Keymap eines bestimmten Keyboards.
+
+**Anwendung**:
+
+```
+qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
+```
+
+## `qmk pyformat`
+
+Dieser Befehl formatiert Python-Code in `qmk_firmware`.
+
+**Anwendung**:
+
+```
+qmk pyformat
+```
+
+## `qmk pytest`
+
+Dieser Befehl führt die Python Test Suite aus. Wenn Du Python-Code veränderst, solltest Du sicherstellen, dass der Test erfolgreich ausgeführt wurde.
+
+**Anwendung**:
+
+```
+qmk pytest
+```

docs/driver_installation_zadig.md

@@ -0,0 +1,48 @@
+# Bootloader Driver Installation with Zadig
+
+QMK presents itself to the host as a regular HID keyboard device, and as such requires no special drivers. However, in order to flash your keyboard on Windows, the bootloader device that appears when you reset the board often *does*.
+
+There are two notable exceptions: the Caterina bootloader, usually seen on Pro Micros, and the HalfKay bootloader shipped with PJRC Teensys, appear as a serial port and a generic HID device respectively, and so do not require a driver.
+
+We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have set up the development environment with MSYS2 or WSL, the `qmk_install.sh` script will have asked if you want it to install the drivers for you.
+
+## Installation
+
+Put your keyboard into bootloader mode, either by hitting the `RESET` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic](feature_bootmagic.md) docs for more details). Some boards use [Command](feature_command.md) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in.
+Some keyboards may have specific instructions for entering the bootloader. For example, the [Bootmagic Lite](feature_bootmagic.md#bootmagic-lite) key (default: Escape) might be on a different key, e.g. Left Control; or the magic combination for Command (default: Left Shift+Right Shift) might require you to hold something else, e.g. Left Control+Right Control. Refer to the board's README file if you are unsure.
+
+To put a device in bootloader mode with USBaspLoader, tap the `RESET` button while holding down the `BOOT` button.
+Alternatively, hold `BOOT` while inserting the USB cable.
+
+Zadig will automatically detect the bootloader device. You may sometimes need to check **Options → List All Devices**.
+
+ - For keyboards with Atmel AVR MCUs, the bootloader will be named something similar to `ATm32U4DFU`, and have a Vendor ID of `03EB`.
+ - USBasp bootloaders will appear as `USBasp`, with a VID/PID of `16C0:05DC`.
+ - AVR keyboards flashed with the QMK-DFU bootloader will be named `<keyboard name> Bootloader` and will also have the VID `03EB`.
+ - For most ARM keyboards, it will be called `STM32 BOOTLOADER`, and have a VID/PID of `0483:DF11`.
+
+!> If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is probably not in bootloader mode. The arrow will be colored orange and you will be asked to confirm modifying a system driver. **Do not** proceed if this is the case!
+
+If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. For flashing a USBaspLoader device via command line with msys2, the `libusbk` driver is recommended, otherwise `libusb-win32` will work fine if you are using QMK Toolbox for flashing.
+
+![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png)
+
+Finally, unplug and replug the keyboard to make sure the new driver has been loaded. If you are using the QMK Toolbox to flash, exit and restart it too, as it can sometimes fail to recognize the driver change.
+
+## Recovering from Installation to Wrong Device
+
+If you find that you can no longer type with the keyboard, you may have accidentally replaced the driver for the keyboard itself instead of for the bootloader. This can happen when the keyboard is not in the bootloader mode. You can easily confirm this in Zadig - a healthy keyboard has the `HidUsb` driver installed on all of its interfaces:
+
+![A healthy keyboard as seen by Zadig](https://i.imgur.com/Hx0E5kC.png)
+
+Open the Device Manager and look for a device that looks like your keyboard.
+
+![The board with the wrong driver installed, in Device Manager](https://i.imgur.com/L3wvX8f.png)
+
+Right-click it and hit **Uninstall device**. Make sure to tick **Delete the driver software for this device** first.
+
+![The Device Uninstall dialog, with the "delete driver" checkbox ticked](https://i.imgur.com/aEs2RuA.png)
+
+Click **Action → Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again!
+
+?> A full reboot of your computer may sometimes be necessary at this point, to get Windows to pick up the new driver.

docs/faq_build.md

@@ -19,7 +19,11 @@ Note that running `make` with `sudo` is generally ***not*** a good idea, and you
 
 ### Linux `udev` Rules
 On Linux, you'll need proper privileges to access the MCU. You can either use
-`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
+`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following:
+```console
+sudo udevadm control --reload-rules
+sudo udevadm trigger
+```
 
 **/etc/udev/rules.d/50-atmel-dfu.rules:**
 ```
@@ -43,20 +47,39 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
 ```
 
+**/etc/udev/rules.d/55-catalina.rules:**
+```
+# ModemManager should ignore the following devices
+ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"
+ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"
+```
+
+**Note:** ModemManager filtering only works when not in strict mode, the following commands can update that settings:
+```console
+sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service
+sudo systemctl daemon-reload
+sudo systemctl restart ModemManager
+```
+
+**/etc/udev/rules.d/56-dfu-util.rules:**
+```
+# stm32duino
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", MODE:="0666"
+# Generic stm32
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"
+```
+
 ### Serial device is not detected in bootloader mode on Linux
 Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
 Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
 
 ## Unknown Device for DFU Bootloader
 
-Issues encountered when flashing keyboards on Windows are most often due to having the wrong drivers installed for the bootloader. 
+Issues encountered when flashing keyboards on Windows are most often due to having the wrong drivers installed for the bootloader, or none at all.
 
-Re-running the installation script for MSYS2 may help (eg run `util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue. Alternatively, you can download and run the [`qmk_driver_installer`](https://github.com/qmk/qmk_driver_installer) package.
-
-If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, and run it on the system.  Then, you will need to reset your board into bootloader mode.  After that, locate the device in question. If the device doesn't show up in the list (or nothing shows up in the list), you may need to enable the `List all devices` option in the `Options` menu.
-
-From here, you will need to know what type of controller the board is using.  You may see it listed in the Device Manager as `ATmega32U4` device (which is an AVR board), or an `STM32` device (Which is an ARM board).  For AVR boards, use `libusb-win32` for the driver. For ARM boards, use the `WinUSB` driver.  Once the correct driver type has been selected, click on the `Replace Driver` button, unplug your board, plug it back in, and reset it again.
+Re-running the QMK installation script (`./util/qmk_install.sh` from the `qmk_firmware` directory in MSYS2 or WSL) or reinstalling the QMK Toolbox may fix the issue. Alternatively, you can download and run the [`qmk_driver_installer`](https://github.com/qmk/qmk_driver_installer) package manually.
 
+If that doesn't work, then you may need to download and run Zadig. See [Bootloader Driver Installation with Zadig](driver_installation_zadig.md) for more detailed information.
 
 ## WINAVR is Obsolete
 It is no longer recommended and may cause some problem.

docs/faq_debug.md

@@ -184,22 +184,15 @@ Pressing any key during sleep should wake host.
 
 Arduino Leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem.
 
+## Enabling JTAG
 
-## Using PF4-7 Pins of USB AVR?
-You need to set JTD bit of MCUCR yourself to use PF4-7 as GPIO. Those pins are configured to serve JTAG function by default. MCUs like ATMega*U* or AT90USB* are affected with this.
+By default, the JTAG debugging interface is disabled as soon as the keyboard starts up. JTAG-capable MCUs come from the factory with the `JTAGEN` fuse set, and it takes over certain pins of the MCU that the board may be using for the switch matrix, LEDs, etc.
 
-If you are using Teensy this isn't needed. Teensy is shipped with JTAGEN fuse bit unprogrammed to disable the function.
+If you would like to keep JTAG enabled, just add the following to your `config.h`:
 
-See this code.
+```c
+#define NO_JTAG_DISABLE
 ```
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
-```
-https://github.com/tmk/tmk_keyboard/blob/master/keyboard/hbkb/matrix.c#L67
-
-And read **26.5.1 MCU Control Register – MCUCR** of ATMega32U4 datasheet.
-
 
 ## Adding LED Indicators of Lock Keys
 You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post.

docs/faq_general.md

@@ -4,10 +4,6 @@
 
 [QMK](https://github.com/qmk), short for Quantum Mechanical Keyboard, is a group of people building tools for custom keyboards. We started with the [QMK firmware](https://github.com/qmk/qmk_firmware), a heavily modified fork of [TMK](https://github.com/tmk/tmk_keyboard).
 
-### Why the Name Quantum?
-
-<!-- FIXME -->
-
 ## What Differences Are There Between QMK and TMK?
 
 TMK was originally designed and implemented by [Jun Wako](https://github.com/tmk). QMK started as [Jack Humbert](https://github.com/jackhumbert)'s fork of TMK for the Planck. After a while Jack's fork had diverged quite a bit from TMK, and in 2015 Jack decided to rename his fork to QMK.

docs/faq_keymap.md

@@ -95,13 +95,6 @@ Even worse, it is not recognized unless the keyboard's VID and PID match that of
 
 See [this issue](https://github.com/qmk/qmk_firmware/issues/2179) for detailed information.
 
-
-## Media Control Keys in Mac OSX
-#### KC_MNXT and KC_MPRV Does Not Work on Mac
-Use `KC_MFFD`(`KC_MEDIA_FAST_FORWARD`) and `KC_MRWD`(`KC_MEDIA_REWIND`) instead of `KC_MNXT` and `KC_MPRV`.
-See https://github.com/tmk/tmk_keyboard/issues/195
-
-
 ## Keys Supported in Mac OSX?
 You can know which keycodes are supported in OSX from this source code.
 

docs/feature_audio.md

@@ -21,6 +21,8 @@ STARTUP_SONG // plays when the keyboard starts up (audio.c)
 GOODBYE_SONG // plays when you press the RESET key (quantum.c)
 AG_NORM_SONG // plays when you press AG_NORM (quantum.c)
 AG_SWAP_SONG // plays when you press AG_SWAP (quantum.c)
+CG_NORM_SONG // plays when you press CG_NORM (quantum.c)
+CG_SWAP_SONG // plays when you press CG_SWAP (quantum.c)
 MUSIC_ON_SONG // plays when music mode is activated (process_music.c)
 MUSIC_OFF_SONG // plays when music mode is deactivated (process_music.c)
 CHROMATIC_SONG // plays when the chromatic music mode is selected (process_music.c)

docs/feature_backlight.md

@@ -1,6 +1,8 @@
 # Backlighting
 
-Many keyboards support backlit keys by way of individual LEDs placed through or underneath the keyswitches. QMK is able to control the brightness of these LEDs by switching them on and off rapidly in a certain ratio, a technique known as *Pulse Width Modulation*, or PWM. By altering the duty cycle of the PWM signal, it creates the illusion of dimming.
+Many keyboards support backlit keys by way of individual LEDs placed through or underneath the keyswitches. This feature is distinct from both the [RGB underglow](feature_rgblight.md) and [RGB matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously install multiple different single coloured LEDs on a keyboard.
+
+QMK is able to control the brightness of these LEDs by switching them on and off rapidly in a certain ratio, a technique known as *Pulse Width Modulation*, or PWM. By altering the duty cycle of the PWM signal, it creates the illusion of dimming.
 
 The MCU can only supply so much current to its GPIO pins. Instead of powering the backlight directly from the MCU, the backlight pin is connected to a transistor or MOSFET that switches the power to the LEDs.
 
@@ -12,9 +14,8 @@ Most keyboards have backlighting enabled by default if they support it, but if i
 BACKLIGHT_ENABLE = yes
 ```
 
-You should then be able to use the keycodes below to change the backlight level.
-
 ## Keycodes
+Once enabled the following keycodes below can be used to change the backlight level.
 
 |Key      |Description                               |
 |---------|------------------------------------------|
@@ -26,40 +27,41 @@ You should then be able to use the keycodes below to change the backlight level.
 |`BL_DEC` |Decrease the backlight level              |
 |`BL_BRTG`|Toggle backlight breathing                |
 
-## Caveats
+## AVR driver
 
-This feature is distinct from both the [RGB underglow](feature_rgblight.md) and [RGB matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously use multiple different coloured LEDs on a keyboard.
-
-Hardware PWM is only supported on certain pins of the MCU, so if the backlighting is not connected to one of them, a software PWM implementation triggered by hardware timer interrupts will be used.
+### Caveats
 
 Hardware PWM is supported according to the following table:
 
-| Backlight Pin | Hardware timer          |
-|---------------|-------------------------|
-|`B5`           | Timer 1                 |
-|`B6`           | Timer 1                 |
-|`B7`           | Timer 1                 |
-|`C6`           | Timer 3                 |
-|`D4`           | Timer 1 (ATmega32A only)|
-| other         | Software PWM            |
+|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328P|
+|-------------|-------------|-------------|-------------|---------|----------|
+|`B1`         |             |             |             |         |Timer 1   |
+|`B2`         |             |             |             |         |Timer 1   |
+|`B5`         |Timer 1      |Timer 1      |             |         |          |
+|`B6`         |Timer 1      |Timer 1      |             |         |          |
+|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |          |
+|`C4`         |Timer 3      |             |             |         |          |
+|`C5`         |Timer 3      |             |Timer 1      |         |          |
+|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |          |
+|`D4`         |             |             |             |Timer 1  |          |
+|`D5`         |             |             |             |Timer 1  |          |
 
-The [audio feature](feature_audio.md) also uses hardware timers. Please refer to the following table to know what hardware timer the software PWM will use depending on the audio configuration:
+All other pins will use software PWM. If the [Audio](feature_audio.md) feature is disabled or only using one timer, the backlight PWM can be triggered by a hardware timer:
 
-| Audio Pin(s) | Audio Timer | Software PWM Timer |
-|--------------|-------------|--------------------|
-| `C4`         | Timer 3     | Timer 1            |
-| `C5`         | Timer 3     | Timer 1            |
-| `C6`         | Timer 3     | Timer 1            |
-| `B5`         | Timer 1     | Timer 3            |
-| `B6`         | Timer 1     | Timer 3            |
-| `B7`         | Timer 1     | Timer 3            |
-| `Bx` & `Cx`  | Timer 1 & 3 | None               |
+|Audio Pin|Audio Timer|Software PWM Timer|
+|---------|-----------|------------------|
+|`C4`     |Timer 3    |Timer 1           |
+|`C5`     |Timer 3    |Timer 1           |
+|`C6`     |Timer 3    |Timer 1           |
+|`B5`     |Timer 1    |Timer 3           |
+|`B6`     |Timer 1    |Timer 3           |
+|`B7`     |Timer 1    |Timer 3           |
 
-When all timers are in use for [audio](feature_audio.md), the backlight software PWM will not use a hardware timer, but instead will be triggered during the matrix scan. In this case the backlight doesn't support breathing and might show lighting artifacts (for instance flickering), because the PWM computation might not be called with enough timing precision.
+When both timers are in use for Audio, the backlight PWM will not use a hardware timer, but will instead be triggered during the matrix scan. In this case, breathing is not supported, and the backlight might flicker, because the PWM computation may not be called with enough timing precision.
 
-## Configuration
+### AVR Configuration
 
-To change the behaviour of the backlighting, `#define` these in your `config.h`:
+To change the behavior of the backlighting, `#define` these in your `config.h`:
 
 |Define               |Default      |Description                                                                                                  |
 |---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
@@ -71,14 +73,14 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
 |`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
 |`BACKLIGHT_ON_STATE` |`0`          |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low                        |
 
-## Backlight On State
+### Backlight On State
 
 Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *high*.
 Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case, when the transistor is on, the pin is driven *low* instead.
 
 This functionality is configured at the keyboard level with the `BACKLIGHT_ON_STATE` define.
 
-## Multiple backlight pins
+### Multiple backlight pins
 
 Most keyboards have only one backlight pin which control all backlight LEDs (especially if the backlight is connected to an hardware PWM pin).
 In software PWM, it is possible to define multiple backlight pins. All those pins will be turned on and off at the same time during the PWM duty cycle.
@@ -86,13 +88,13 @@ This feature allows to set for instance the Caps Lock LED (or any other controll
 
 To activate multiple backlight pins, you need to add something like this to your user `config.h`:
 
-~~~c
+```c
 #define BACKLIGHT_LED_COUNT 2
 #undef BACKLIGHT_PIN
 #define BACKLIGHT_PINS { F5, B2 }
-~~~
+```
 
-## Hardware PWM Implementation
+### Hardware PWM Implementation
 
 When using the supported pins for backlighting, QMK will use a hardware timer configured to output a PWM signal. This timer will count up to `ICRx` (by default `0xFFFF`) before resetting to 0.
 The desired brightness is calculated and stored in the `OCRxx` register. When the counter reaches this value, the backlight pin will go low, and is pulled high again when the counter resets.
@@ -101,7 +103,7 @@ In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus th
 The breathing effect is achieved by registering an interrupt handler for `TIMER1_OVF_vect` that is called whenever the counter resets, roughly 244 times per second.
 In this handler, the value of an incrementing counter is mapped onto a precomputed brightness curve. To turn off breathing, the interrupt handler is simply disabled, and the brightness reset to the level stored in EEPROM.
 
-## Software PWM Implementation
+### Software PWM Implementation
 
 When `BACKLIGHT_PIN` is not set to a hardware backlight pin, QMK will use a hardware timer configured to trigger software interrupts. This time will count up to `ICRx` (by default `0xFFFF`) before resetting to 0.
 When resetting to 0, the CPU will fire an OVF (overflow) interrupt that will turn the LEDs on, starting the duty cycle.
@@ -110,6 +112,29 @@ In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus th
 
 The breathing effect is the same as in the hardware PWM implementation.
 
+## ARM Driver
+
+### Caveats
+
+Currently only hardware PWM is supported, and does not provide automatic configuration.
+
+?> STMF072 support is being investigated.
+
+### ARM Configuration
+
+To change the behavior of the backlighting, `#define` these in your `config.h`:
+
+|Define                  |Default      |Description                                                                                                  |
+|------------------------|-------------|-------------------------------------------------------------------------------------------------------------|
+|`BACKLIGHT_PIN`         |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
+|`BACKLIGHT_PWM_DRIVER`  |`PWMD4`      |The PWM driver to use, see ST datasheets for pin to PWM timer mapping. Unless you are designing your own keyboard, you shouldn't need to change this|
+|`BACKLIGHT_PWM_CHANNEL` |`3`          |The PWM channel to use, see ST datasheets for pin to PWM channel mapping. Unless you are designing your own keyboard, you shouldn't need to change this|
+|`BACKLIGHT_PAL_MODE`    |`2`          |The pin alternative function to use, see ST datasheets for pin AF mapping. Unless you are designing your own keyboard, you shouldn't need to change this|
+|`BACKLIGHT_LEVELS`      |`3`          |The number of brightness levels (maximum 31 excluding off)                                                   |
+|`BACKLIGHT_CAPS_LOCK`   |*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                             |
+|`BACKLIGHT_BREATHING`   |*Not defined*|Enable backlight breathing, if supported                                                                     |
+|`BREATHING_PERIOD`      |`6`          |The length of one backlight "breath" in seconds                                                              |
+
 ## Backlight Functions
 
 |Function  |Description                                                |
@@ -120,7 +145,8 @@ The breathing effect is the same as in the hardware PWM implementation.
 |`backlight_step()`      |Cycle through backlight levels               |
 |`backlight_increase()`  |Increase the backlight level                 |
 |`backlight_decrease()`  |Decrease the backlight level                 |
-|`backlight_level(x)`    |Sets the backlight level to specified level  |
+|`backlight_level(x)`    |Sets the backlight level, from 0 to          |
+|                        |`BACKLIGHT_LEVELS`                           |
 |`get_backlight_level()` |Return the current backlight level           |
 |`is_backlight_enabled()`|Return whether the backlight is currently on |
 

docs/feature_bluetooth.md

@@ -2,18 +2,18 @@
 
 ## Bluetooth Known Supported Hardware
 
-Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1 Qmk has support for RN-42 HID Firmware and Bluefruit EZ Key the later of which is not produced anymore. For more recent BLE protocols currently only the Adafruit Bluefruit SPI friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support Mouse Input.
+Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1, QMK has support for RN-42 modules and the Bluefruit EZ-Key, the latter of which is not produced anymore. For more recent BLE protocols, currently only the Adafruit Bluefruit SPI Friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support mouse input.
 
-|Board                                                           |Bluetooth Protocol          |Connection Type |Rules.mk                   |Bluetooth Chip|
+|Board                                                           |Bluetooth Protocol          |Connection Type |rules.mk                   |Bluetooth Chip|
 |----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
-|[Adafruit EzKey HID]("https://www.adafruit.com/product/1535")   |Bluetooth Classic           | UART           | BLUETOOTH = AdafruitEZKey |              |
-|Rover Networks RN-42 (Sparkfun Bluesmirf)                       |Bluetooth Classic           | UART           | BLUETOOTH = RN42          | RN-42        |
-|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy        | SPI            | BLUETOOTH = AdafruitBLE   | nRF5182      |
+|[Adafruit EZ-Key HID](https://www.adafruit.com/product/1535)   |Bluetooth Classic           | UART           |`BLUETOOTH = AdafruitEZKey` |              |
+|Roving Networks RN-42 (Sparkfun Bluesmirf)                       |Bluetooth Classic           | UART           |`BLUETOOTH = RN42`          | RN-42        |
+|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy        | SPI            |`BLUETOOTH = AdafruitBLE`   | nRF51822      |
 
 Not Supported Yet but possible:
 * [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514)
 * HC-05 boards flashed with RN-42 firmware. They apparently both use the CSR BC417 Chip. Flashing it with RN-42 firmware gives it HID capability.
-* [Sparkfun Bluetooth mate](https://www.sparkfun.com/products/14839)
+* Sparkfun Bluetooth Mate
 * HM-13 based boards
 
 ### Adafruit BLE SPI Friend

docs/feature_bootmagic.md

@@ -34,6 +34,8 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`X`               |Toggle key matrix debugging                  |
 |`K`               |Toggle keyboard debugging                    |
 |`M`               |Toggle mouse debugging                       |
+|`L`               |Set "Left Hand" for EE_HANDS handedness      |
+|`R`               |Set "Right Hand" for EE_HANDS handedness     |
 |Backspace         |Clear the EEPROM                             |
 |Caps Lock         |Toggle treating Caps Lock as Left Control    |
 |Left Control      |Toggle swapping Caps Lock and Left Control   |
@@ -64,8 +66,11 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`MAGIC_NO_GUI`                    |         |Disable the GUI keys (useful when gaming) |
 |`MAGIC_UNNO_GUI`                  |         |Enable the GUI keys                       |
 |`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides (for macOS)|
-|`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Left Alt and Left GUI              |
-|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Left Alt and GUI swap              |
+|`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI                        |
+|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap                   |
+|`MAGIC_SWAP_CTL_GUI`              |`CG_SWAP`|Swap Ctrl and GUI on both sides (for macOS)|
+|`MAGIC_UNSWAP_CTL_GUI`            |`CG_NORM`|Unswap Ctrl and GUI                       |
+|`MAGIC_TOGGLE_CTL_GUI`            |`CG_TOGG`|Toggle Ctrl and GUI swap                  |
 |`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace                    |
 |`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace                  |
 |`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Left Control and Caps Lock           |
@@ -76,6 +81,12 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`MAGIC_UNSWAP_LALT_LGUI`          |         |Unswap Left Alt and Left GUI              |
 |`MAGIC_SWAP_RALT_RGUI`            |         |Swap Right Alt and Right GUI              |
 |`MAGIC_UNSWAP_RALT_RGUI`          |         |Unswap Right Alt and Right GUI            |
+|`MAGIC_SWAP_LCTL_LGUI`            |         |Swap Left Control and Left GUI            |
+|`MAGIC_UNSWAP_LCTL_LGUI`          |         |Unswap Left Control and Left GUI          |
+|`MAGIC_SWAP_RCTL_RGUI`            |         |Swap Right Control and Right GUI          |
+|`MAGIC_UNSWAP_RCTL_RGUI`          |         |Unswap Right Control and Right GUI        |
+|`MAGIC_EE_HANDS_LEFT`             |         |Set "Left Hand" for EE_HANDS handedness   |
+|`MAGIC_EE_HANDS_RIGHT`            |         |Set "Right Hand" for EE_HANDS handedness  |
 
 ## Configuration
 
@@ -91,6 +102,8 @@ If you would like to change the hotkey assignments for Bootmagic, `#define` thes
 |`BOOTMAGIC_KEY_DEBUG_MATRIX`            |`KC_X`       |Toggle matrix debugging                            |
 |`BOOTMAGIC_KEY_DEBUG_KEYBOARD`          |`KC_K`       |Toggle keyboard debugging                          |
 |`BOOTMAGIC_KEY_DEBUG_MOUSE`             |`KC_M`       |Toggle mouse debugging                             |
+|`BOOTMAGIC_KEY_EE_HANDS_LEFT`           |`KC_L`       |Set "Left Hand" for EE_HANDS handedness            |
+|`BOOTMAGIC_KEY_EE_HANDS_RIGHT`          |`KC_R`       |Set "Right Hand" for EE_HANDS handedness           |
 |`BOOTMAGIC_KEY_SWAP_CONTROL_CAPSLOCK`   |`KC_LCTRL`   |Swap Left Control and Caps Lock                    |
 |`BOOTMAGIC_KEY_CAPSLOCK_TO_CONTROL`     |`KC_CAPSLOCK`|Toggle treating Caps Lock as Left Control          |
 |`BOOTMAGIC_KEY_SWAP_LALT_LGUI`          |`KC_LALT`    |Toggle swapping Left Alt and Left GUI (for macOS)  |

docs/feature_combo.md

@@ -2,7 +2,7 @@
 
 The Combo feature is a chording type solution for adding custom actions.  It lets you hit multiple keys at once and produce a different effect.  For instance, hitting `A` and `S` within the tapping term would hit `ESC` instead, or have it perform even more complex tasks.
 
-To enable this feature, yu need to add `COMBO_ENABLE = yes` to your `rules.mk`.
+To enable this feature, you need to add `COMBO_ENABLE = yes` to your `rules.mk`.
 
 Additionally, in your `config.h`, you'll need to specify the number of combos that you'll be using, by adding `#define COMBO_COUNT 1` (replacing 1 with the number that you're using).
 <!-- At this time, this is necessary -->

docs/feature_dip_switch.md

@@ -0,0 +1,90 @@
+# DIP Switches
+
+DIP switches are supported by adding this to your `rules.mk`:
+
+    DIP_SWITCH_ENABLE = yes
+
+and this to your `config.h`:
+
+```c
+#define DIP_SWITCH_PINS { B14, A15, A10, B9 }
+```
+
+## Callbacks
+
+The callback functions can be inserted into your `<keyboard>.c`:
+
+```c
+void dip_switch_update_kb(uint8_t index, bool active) { 
+    dip_switch_update_user(index, active); 
+}
+```
+
+
+or `keymap.c`:
+
+```c
+void dip_switch_update_user(uint8_t index, bool active) { 
+    switch (index) {
+        case 0:
+            if(active) { audio_on(); } else { audio_off(); }
+            break;
+        case 1:
+            if(active) { clicky_on(); } else { clicky_off(); }
+            break;
+        case 2:
+            if(active) { music_on(); } else { music_off(); }
+            break;
+        case 3:
+            if (active) {
+                #ifdef AUDIO_ENABLE
+                    PLAY_SONG(plover_song);
+                #endif
+                layer_on(_PLOVER);
+            } else {
+                #ifdef AUDIO_ENABLE
+                    PLAY_SONG(plover_gb_song);
+                #endif
+                layer_off(_PLOVER);
+            }
+            break;
+    }
+}
+```
+
+Additionally, we support bit mask functions which allow for more complex handling. 
+
+
+```c
+void dip_switch_update_mask_kb(uint32_t state) { 
+    dip_switch_update_mask_user(state); 
+}
+```
+
+
+or `keymap.c`:
+
+```c
+void dip_switch_update_mask_user(uint32_t state) { 
+    if (state & (1UL<<0) && state & (1UL<<1)) {
+        layer_on(_ADJUST); // C on esc
+    } else {
+        layer_off(_ADJUST);
+    }
+    if (state & (1UL<<0)) {
+        layer_on(_TEST_A); // A on ESC
+    } else {
+        layer_off(_TEST_A);
+    }
+    if (state & (1UL<<1)) {
+        layer_on(_TEST_B); // B on esc
+    } else {
+        layer_off(_TEST_B);
+    }
+}
+```
+
+
+## Hardware
+
+One side of the DIP switch should be wired directly to the pin on the MCU, and the other side to ground.  It should not matter which side is connected to which, as it should be functionally the same. 

docs/feature_encoders.md

@@ -20,6 +20,15 @@ Additionally, the resolution can be specified in the same file (the default & su
 
     #define ENCODER_RESOLUTION 4
 
+## Split Keyboards
+
+If you are using different pinouts for the encoders on each half of a split keyboard, you can define the pinout for the right half like this:
+
+```c
+#define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a }
+#define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b }
+```
+
 ## Callbacks
 
 The callback functions can be inserted into your `<keyboard>.c`:
@@ -49,3 +58,11 @@ or `keymap.c`:
 ## Hardware
 
 The A an B lines of the encoders should be wired directly to the MCU, and the C/common lines should be wired to ground.
+
+## Encoder matrix
+
+You can also wire the C/common line through a diode (arrow towards the row) to each of the rows (or reading pin) in your matrix, and use as many encoders as you have rows (multiplied by the number of A/B lines you have hooked up). To do this, you can add this line to your `config.h` with all of the pins you use:
+
+```c
+#define ENCODERS_PAD_C { encoder1c, encoder2c }
+```

docs/feature_haptic_feedback.md

@@ -29,6 +29,9 @@ Not all keycodes below will work depending on which haptic mechanism you have ch
 |`HPT_BUZ`  | Toggle solenoid buzz on/off                           |
 |`HPT_MODI` | Go to next DRV2605L waveform                          |
 |`HPT_MODD` | Go to previous DRV2605L waveform                      |
+|`HPT_CONT` | Toggle continuous haptic mode on/off                  |
+|`HPT_CONI` | Increase DRV2605L continous haptic strength           |
+|`HPT_COND` | Decrease DRV2605L continous haptic strength           |
 |`HPT_DWLI` | Increase Solenoid dwell time                          |
 |`HPT_DWLD` | Decrease Solenoid dwell time                          |
 
@@ -145,3 +148,7 @@ If haptic feedback is enabled, the keyboard will vibrate to a specific sqeuence
 #define DRV_MODE_DEFAULT *sequence name or number*
 ```
 This will set what sequence HPT_RST will set as the active mode. If not defined, mode will be set to 1 when HPT_RST is pressed.
+
+### DRV2605L Continuous Haptic Mode
+
+This mode sets continuous haptic feedback with the option to increase or decrease strength. 

docs/feature_hd44780.md

@@ -2,11 +2,12 @@
 
 This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
 
-You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes. This will use about 400 KB of extra space.
+You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes.
 
 ## Configuration
 
-You will need to configure the pins used by your display and its number of lines and collumn in your keyboards `config.h`.
+You will need to configure the pins used by your display, and its number of lines and columns in your keyboard's `config.h`.
+
 
 Uncomment the section labled HD44780 and change the parameters as needed.
 ````
@@ -25,7 +26,7 @@ Uncomment the section labled HD44780 and change the parameters as needed.
 #define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
 #define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
 #define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2 
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
 #define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
 #define LCD_RS_PORT      LCD_PORT     //< port for RS line        
 #define LCD_RS_PIN       3            //< pin  for RS line        
@@ -38,14 +39,14 @@ Uncomment the section labled HD44780 and change the parameters as needed.
 
 Should you need to configure other properties you can copy them from `quantum/hd44780.h` and set them in your `config.h`
 
-## Usage 
+## Usage
 
-To initialize your display call lcd_init() with one of these parameters:
+To initialize your display, call `lcd_init()` with one of these parameters:
 ````
 LCD_DISP_OFF             : display off
 LCD_DISP_ON              : display on, cursor off
 LCD_DISP_ON_CURSOR       : display on, cursor on
-LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing 
+LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing
 ````
 This is best done in your keyboards `matrix_init_kb` or your keymaps `matrix_init_user`.  
 It is advised to clear the display before use.  
@@ -53,4 +54,4 @@ To do so call `lcd_clrsrc()`.
 
 To now print something to your Display you first call `lcd_gotoxy(column, line)`. To go to the start of the first line you would call `lcd_gotoxy(0, 0)` and then print a string with `lcd_puts("example string")`.
 
-There are more posible methods to control the display. [For in depth documentation please visit the linked page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
+There are more methods available to control the display. [For in depth documentation please visit the linked page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)

docs/feature_key_lock.md

@@ -16,7 +16,7 @@ First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Th
 
 ## Caveats
 
-Key Lock is only able to hold standard action keys and [One Shot modifier](quantum_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
+Key Lock is only able to hold standard action keys and [One Shot modifier](feature_advanced_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
 This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held.
 
 Switching layers will not cancel the Key Lock.

docs/feature_oled_driver.md

@@ -31,7 +31,7 @@ This enables the feature and the `OLED_DRIVER_ENABLE` define. Then in your `keym
 void oled_task_user(void) {
   // Host Keyboard Layer Status
   oled_write_P(PSTR("Layer: "), false);
-  switch (biton32(layer_state)) {
+  switch (get_highest_layer(layer_state)) {
     case _QWERTY:
       oled_write_P(PSTR("Default\n"), false);
       break;
@@ -96,17 +96,19 @@ void oled_task_user(void) {
 
  ## Basic Configuration
 
-| Define                 | Default           | Description                                                                                                                |
-|------------------------|-------------------|----------------------------------------------------------------------------------------------------------------------------|
-| `OLED_DISPLAY_ADDRESS` | `0x3C`            | The i2c address of the OLED Display                                                                                        |
-| `OLED_FONT_H`          | `"glcdfont.c"`    | The font code file to use for custom fonts                                                                                 |
-| `OLED_FONT_START`      | `0`               | The starting characer index for custom fonts                                                                               |
-| `OLED_FONT_END`        | `224`             | The ending characer index for custom fonts                                                                                 |
-| `OLED_FONT_WIDTH`      | `6`               | The font width                                                                                                             |
-| `OLED_FONT_HEIGHT`     | `8`               | The font height (untested)                                                                                                 |
-| `OLED_DISABLE_TIMEOUT` | *Not defined*     | Disables the built in OLED timeout feature. Useful when implementing custom timeout rules.                                 |
-| `OLED_IC`              | `OLED_IC_SSD1306` | Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller.                                                        |
-| `OLED_COLUMN_OFFSET`   | `0`               | (SH1106 only.) Shift output to the right this many pixels.<br />Useful for 128x64 displays centered on a 132x64 SH1106 IC. |
+| Define                     | Default           | Description                                                                                                                |
+|----------------------------|-------------------|----------------------------------------------------------------------------------------------------------------------------|
+| `OLED_DISPLAY_ADDRESS`     | `0x3C`            | The i2c address of the OLED Display                                                                                        |
+| `OLED_FONT_H`              | `"glcdfont.c"`    | The font code file to use for custom fonts                                                                                 |
+| `OLED_FONT_START`          | `0`               | The starting characer index for custom fonts                                                                               |
+| `OLED_FONT_END`            | `224`             | The ending characer index for custom fonts                                                                                 |
+| `OLED_FONT_WIDTH`          | `6`               | The font width                                                                                                             |
+| `OLED_FONT_HEIGHT`         | `8`               | The font height (untested)                                                                                                 |
+| `OLED_TIMEOUT`             | `60000`           | Turns off the OLED screen after 60000ms of keyboard inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.            |
+| `OLED_SCROLL_TIMEOUT`      | `0`               | Scrolls the OLED screen after 0ms of OLED inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.                      |
+| `OLED_SCROLL_TIMEOUT_RIGHT`| *Not defined*     | Scroll timeout direction is right when defined, left when undefined.                                                       |
+| `OLED_IC`                  | `OLED_IC_SSD1306` | Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller.                                                        |
+| `OLED_COLUMN_OFFSET`       | `0`               | (SH1106 only.) Shift output to the right this many pixels.<br />Useful for 128x64 displays centered on a 132x64 SH1106 IC. |
 
  ## 128x64 & Custom sized OLED Displays
 

docs/feature_ps2_mouse.md

@@ -149,7 +149,7 @@ In your keyboard config.h:
 
 #### PS/2 Mouse Features
 
-These enable settings supported by the PS/2 mouse protocol: http://www.computer-engineering.org/ps2mouse/
+These enable settings supported by the PS/2 mouse protocol.
 
 ```
 /* Use remote mode instead of the default stream mode (see link) */
@@ -202,7 +202,7 @@ Note: you can also use `ps2_mouse_set_resolution` for the same effect (not suppo
 #### Scroll Button
 
 If you're using a trackpoint, you will likely want to be able to use it for scrolling.
-Its possible to enable a "scroll button/s" that when pressed will cause the mouse to scroll instead of moving.
+It's possible to enable a "scroll button/s" that when pressed will cause the mouse to scroll instead of moving.
 To enable the feature, you must set a scroll button mask as follows:
 
 ```

docs/feature_rgb_matrix.md

@@ -374,6 +374,7 @@ These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blo
 #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
 ```
 
 ## EEPROM storage

docs/feature_split_keyboard.md

@@ -47,7 +47,7 @@ The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and D0 (aka PDO or p
 
 The 4 wires of the TRRS cable need to connect GND, VCC, and SCL and SDA (aka PD0/pin 3 and PD1/pin 2, respectively) between the two Pro Micros. 
 
-The pull-up resistors may be placed on either half. It is also possible to use 4 resistors and have the pull-ups in both halves, but this is unnecessary in simple use cases.
+The pull-up resistors may be placed on either half. If you wish to use the halves independently, it is also possible to use 4 resistors and have the pull-ups in both halves.
 
 ![I2C wiring](https://i.imgur.com/Hbzhc6E.png)
 
@@ -96,6 +96,8 @@ However, you'll have to flash the EEPROM files for the correct hand to each cont
 * `:avrdude-split-right`
 * `:dfu-split-left`
 * `:dfu-split-right`
+* `:dfu-util-split-left`
+* `:dfu-util-split-right`
 
 This setting is not changed when re-initializing the EEPROM using the `EEP_RST` key, or using the `eeconfig_init()` function.  However, if you reset the EEPROM outside of the firmware's built in options (such as flashing a file that overwrites the `EEPROM`, like how the [QMK Toolbox]()'s "Reset EEPROM" button works), you'll need to re-flash the controller with the `EEPROM` files. 
 
@@ -160,6 +162,18 @@ There are some settings that you may need to configure, based on how the hardwar
 
 This allows you to specify a different set of pins for the matrix on the right side.  This is useful if you have a board with differently-shaped halves that requires a different configuration (such as Keebio's Quefrency).
 
+```c
+#define DIRECT_PINS_RIGHT { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }
+```
+
+This allows you to specify a different set of direct pins for the right side.
+
+```c
+#define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a }
+#define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b }
+```
+
+This allows you to specify a different set of encoder pins for the right side.
 
 ```c
 #define RGBLIGHT_SPLIT
@@ -176,6 +190,18 @@ This sets how many LEDs are directly connected to each controller.  The first nu
 ?> This setting implies that `RGBLIGHT_SPLIT` is enabled, and will forcibly enable it, if it's not.
 
 
+```c
+#define SPLIT_USB_DETECT
+```
+This option changes the startup behavior to detect an active USB connection when delegating master/slave. If this operation times out, then the half is assume to be a slave. This is the default behavior for ARM, and required for AVR Teensy boards (due to hardware limitations).
+
+?> This setting will stop the ability to demo using battery packs.
+
+```c
+#define SPLIT_USB_TIMEOUT 2500
+```
+This sets the maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`.
+
 ## Additional Resources
 
 Nicinabox has a [very nice and detailed guide](https://github.com/nicinabox/lets-split-guide) for the Let's Split keyboard, that covers most everything you need to know, including troubleshooting information. 

docs/feature_tap_dance.md

@@ -30,7 +30,9 @@ Next, you will want to define some tap-dance keys, which is easiest to do with t
 After this, you'll want to use the `tap_dance_actions` array to specify what actions shall be taken when a tap-dance key is in action. Currently, there are five possible options:
 
 * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held.
-* `ACTION_TAP_DANCE_DUAL_ROLE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode).
+* `ACTION_TAP_DANCE_LAYER_MOVE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode).
+    * This is the same as `ACTION_TAP_DANCE_DUAL_ROLE`, but renamed to something that is clearer about its functionality.  Both names will work.
+* `ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)`: Sends the `kc` keycode when tapped once, or toggles the state of `layer`. (this functions like the `TG` layer keycode).
 * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
 * `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`.
@@ -420,7 +422,7 @@ Tap Dance can be used to mimic MO(layer) and TG(layer) functionality. For this e
 
 The first step is to include the following code towards the beginning of your `keymap.c`:
 
-```
+```c
 typedef struct {
   bool is_press_action;
   int state;
@@ -445,41 +447,22 @@ int cur_dance (qk_tap_dance_state_t *state);
 //Functions associated with individual tap dances
 void ql_finished (qk_tap_dance_state_t *state, void *user_data);
 void ql_reset (qk_tap_dance_state_t *state, void *user_data);
-
-//Declare variable to track which layer is active
-int active_layer;
 ```
 
-The above code is similar to that used in previous examples. The one point to note is that you need to declare a variable to keep track of what layer is currently the active layer. We'll see why shortly.
-
 Towards the bottom of your `keymap.c`, include the following code:
 
-```
-//Update active_layer
-uint32_t layer_state_set_user(uint32_t state) {
-  switch (biton32(state)) {
-    case 1:
-      active_layer = 1;
-      break;
-    case 2:
-      active_layer = 2;
-      break;
-    case 3:
-      active_layer = 3;
-      break;
-    default:
-      active_layer = 0;
-      break;
-  }
-  return state;
-}
-
+```c
 //Determine the current tap dance state
 int cur_dance (qk_tap_dance_state_t *state) {
   if (state->count == 1) {
-    if (!state->pressed) {return SINGLE_TAP;}
-    else return SINGLE_HOLD;
-  } else if (state->count == 2) {return DOUBLE_TAP;}
+    if (!state->pressed) {
+      return SINGLE_TAP;
+    } else {
+      return SINGLE_HOLD;
+    }
+  } else if (state->count == 2) {
+    return DOUBLE_TAP;
+  }
   else return 8;
 }
 
@@ -493,16 +476,30 @@ static tap ql_tap_state = {
 void ql_finished (qk_tap_dance_state_t *state, void *user_data) {
   ql_tap_state.state = cur_dance(state);
   switch (ql_tap_state.state) {
-    case SINGLE_TAP: tap_code(KC_QUOT); break;
-    case SINGLE_HOLD: layer_on(_MY_LAYER); break;
+    case SINGLE_TAP: 
+      tap_code(KC_QUOT); 
+      break;
+    case SINGLE_HOLD: 
+      layer_on(_MY_LAYER); 
+      break;
     case DOUBLE_TAP: 
-      if (active_layer==_MY_LAYER) {layer_off(_MY_LAYER);}
-      else layer_on(_MY_LAYER);
+      //check to see if the layer is already set
+      if (layer_state_is(_MY_LAYER)) {
+        //if already set, then switch it off
+        layer_off(_MY_LAYER);
+      } else { 
+        //if not already set, then switch the layer on
+        layer_on(_MY_LAYER);
+      }
+      break;
   }
 }
 
 void ql_reset (qk_tap_dance_state_t *state, void *user_data) {
-  if (ql_tap_state.state==SINGLE_HOLD) {layer_off(_MY_LAYER);}
+  //if the key was held down and now is released then switch off the layer
+  if (ql_tap_state.state==SINGLE_HOLD) {
+    layer_off(_MY_LAYER);
+  }
   ql_tap_state.state = 0;
 }
 
@@ -512,7 +509,7 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 };
 ```
 
-The is where the real logic of our tap dance key gets worked out. Since `layer_state_set_user()` is called on any layer switch, we use it to update `active_layer`. Our example is assuming that your `keymap.c` includes 4 layers, so adjust the switch statement here to fit your actual number of layers.
+The above code is similar to that used in previous examples. The one point to note is that we need to be able to check which layers are active at any time so we can toggle them if needed. To do this we use the `layer_state_is( layer )` function which returns `true` if the given `layer` is active.
 
 The use of `cur_dance()` and `ql_tap_state` mirrors the above examples.
 

docs/feature_terminal.md

@@ -1,6 +1,6 @@
 # Terminal
 
-> This feature is currently *huge* at 4400 bytes, and should probably only be put on boards with a lot of memory, or for fun.
+> This feature is currently *huge*, and should probably only be put on boards with a lot of memory, or for fun.
 
 The terminal feature is a command-line-like interface designed to communicate through a text editor with keystrokes. It's beneficial to turn off auto-indent features in your editor.
 
@@ -56,7 +56,7 @@ Outputs the last 5 commands entered
 1. help
 2. about
 3. keymap 0
-4. help 
+4. help
 5. flush-buffer
 ```
 

docs/feature_userspace.md

@@ -115,11 +115,11 @@ For instance, let's look at the `layer_state_set_user()` function.  You can enab
 In your `<name.c>` file, you'd want to add this: 
 ```c
 __attribute__ ((weak))
-uint32_t layer_state_set_keymap (uint32_t state) {
+layer_state_t layer_state_set_keymap (layer_state_t state) {
   return state;
 }
 
-uint32_t layer_state_set_user (uint32_t state) {
+layer_state_t layer_state_set_user (layer_state_t state) {
   state = update_tri_layer_state(state, 2, 3, 5);
   return layer_state_set_keymap (state);
 }
@@ -211,15 +211,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             if ( (temp_mod | temp_osm) & MOD_MASK_SHIFT ) 
     #endif
             { // 
-                #if defined(__arm__)  // only run for ARM boards
-                    SEND_STRING(":dfu-util");
-                #elif defined(BOOTLOADER_DFU) // only run for DFU boards
-                    SEND_STRING(":dfu");
-                #elif defined(BOOTLOADER_HALFKAY) // only run for teensy boards
-                    SEND_STRING(":teensy");
-                #elif defined(BOOTLOADER_CATERINA) // only run for Pro Micros
-                    SEND_STRING(":avrdude");
-                #endif // bootloader options
+                SEND_STRING(":flash");
             }
             if ( (temp_mod | temp_osm) & MOD_MASK_CTRL) { 
                 SEND_STRING(" -j8 --output-sync"); 
@@ -244,7 +236,7 @@ endif
 
 This will add a new `KC_MAKE` keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap>`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
 
-Also, holding `shift` will add the appropriate flashing command (`:dfu`, `:teensy`, `:avrdude`, `:dfu-util`) for a majority of keyboards.  Holding `control` will add some commands that will speed up compiling time by processing multiple files at once. 
+Also, holding Shift will add the flash target (`:flash`) to the command.  Holding Control will add some commands that will speed up compiling time by processing multiple files at once. 
 
 And for the boards that lack a shift key, or that you want to always attempt the flashing part, you can add `FLASH_BOOTLOADER = yes` to the `rules.mk` of that keymap.
 

docs/features.md

@@ -12,6 +12,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Combos](feature_combo.md) - Custom actions for multiple key holds.
 * [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic").
 * [Debounce API](feature_debounce_type.md) - Customization of debouncing algorithms, and the ability to add more/custom debouncing. 
+* [DIP Switch](feature_dip_switch.md) - Toggle switches for customizing board function.
 * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
 * [Encoders](feature_encoders.md) - Rotary encoders! 
 * [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. 

docs/flashing.md

@@ -10,11 +10,17 @@ Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by
 
 To ensure compatibility with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead):
 
-    # Bootloader
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-    #     different sizes, comment this out, and the correct address will be loaded
-    #     automatically (+60). See bootloader.mk for all options.
-    BOOTLOADER = atmel-dfu
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+```
 
 Compatible flashers:
 
@@ -64,11 +70,17 @@ Arduino boards and their clones use the [Caterina bootloader](https://github.com
 
 To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-    #     different sizes, comment this out, and the correct address will be loaded
-    #     automatically (+60). See bootloader.mk for all options.
-    BOOTLOADER = caterina
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+```
 
 Compatible flashers:
 
@@ -87,11 +99,16 @@ or
 
     make <keyboard>:<keymap>:avrdude
 
-or if you want to flash multiple boards, use the following command
 
-    make <keyboard>:<keymap>:avrdude-loop
+#### Caterina commands
+
+There are a number of DFU commands that you can use to flash firmware to a DFU device:
+
+* `:avrdude` - This is the normal option which waits until a Caterina device is available (by detecting a new COM port), and then flashes the firmware.
+* `:avrdude-loop` - This runs the same command as `:avrdude`, but after each device is flashed, it will attempt to flash again.  This is useful for bulk flashing. _This requires you to manually escape the loop by hitting Ctrl+C._
+* `:avrdude-split-left` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._
+* `:avrdude-split-right` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._
 
-When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
 
 
 ## Halfkay
@@ -100,11 +117,17 @@ Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on al
 
 To ensure compatibility with the Halfkay bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-    #     different sizes, comment this out, and the correct address will be loaded
-    #     automatically (+60). See bootloader.mk for all options.
-    BOOTLOADER = halfkay
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
+```
 
 Compatible flashers:
 
@@ -125,11 +148,17 @@ USBasploader is a bootloader developed by matrixstorm. It is used in some non-US
 
 To ensure compatibility with the USBasploader bootloader, make sure this block is present in your `rules.mk`:
 
-    # Bootloader
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-    #     different sizes, comment this out, and the correct address will be loaded
-    #     automatically (+60). See bootloader.mk for all options.
-    BOOTLOADER = USBasp
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = USBasp
+```
 
 Compatible flashers:
 
@@ -144,6 +173,42 @@ Flashing sequence:
 3. Flash a .hex file
 4. Reset the device into application mode (may be done automatically)
 
+## BootloadHID
+
+BootloadHID is a USB bootloader for AVR microcontrollers. The uploader tool requires no kernel level driver on Windows and can therefore be run without installing any DLLs.
+
+To ensure compatibility with the bootloadHID bootloader, make sure this block is present your `rules.mk`:
+
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = bootloadHID
+```
+
+Compatible flashers:
+
+* [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash) (recommended Windows GUI)
+* [bootloadhid Command Line](https://www.obdev.at/products/vusb/bootloadhid.html) / `:BootloadHID` in QMK (recommended command line)
+
+Flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `RESET` keycode (may not work on all devices)
+    * Hold the salt key while plugging the keyboard in (usually documented within keyboard readme) 
+2. Wait for the OS to detect the device
+3. Flash a .hex file
+4. Reset the device into application mode (may be done automatically)
+
+or:
+
+    make <keyboard>:<keymap>:bootloadHID
+
 ## STM32
 
 All STM32 chips come preloaded with a factory bootloader that cannot be modified nor deleted. Some STM32 chips have bootloaders that do not come with USB programming (e.g. STM32F103) but the process is still the same.
@@ -171,7 +236,7 @@ Flashing sequence:
 
 There are a number of DFU commands that you can use to flash firmware to a STM32 device:
 
-* `:dfu-util` - The default command for flashing to STM32 devices. 
-* `:dfu-util-wait` - This works like the default command, but it gives you a (configurable) 10 second timeout before it attempts to flash the firmware.  You can use `TIME_DELAY=20` from the command line to change the timeout.
-   * Eg: `make <keyboard>:<keymap>:dfu-util TIME_DELAY=5`
+* `:dfu-util` - The default command for flashing to STM32 devices, and will wait until an STM32 bootloader device is present.
+* `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards.
+* `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards.
 * `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 

docs/flashing_bootloadhid.md

@@ -0,0 +1,70 @@
+# BootloadHID Flashing Instructions and Bootloader Information
+
+ps2avr(GB) boards use an ATmega32A microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
+
+General flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `RESET` keycode (may not work on all devices)
+    * Hold the salt key while plugging the keyboard in (usually documented within keyboard readme) 
+2. Wait for the OS to detect the device
+3. Flash a .hex file
+4. Reset the device into application mode (may be done automatically)
+
+## bootloadHID Flashing Target
+
+Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
+
+To flash via the command line, use the target `:bootloadHID` by executing the following command:
+
+    make <keyboard>:<keymap>:bootloadHID
+
+## GUI Flashing
+
+### Windows
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Ensure the configured VendorID is `16c0` and ProductID is `05df`
+4. Press the `Find Device` button and ensure that your keyboard is found.
+5. Press the `Open .hex File` button and locate the `.hex` file you created.
+6. Press the `Flash Device` button and wait for the process to complete.
+
+## Command Line Flashing
+
+1. Place your keyboard into reset. 
+2. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
+
+### Windows Manual Installation
+For MSYS2:
+1. Download the BootloadHID firmware package from https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz.
+2. Extract contents using a compatible tool, for example 7-Zip.
+3. Add to the MSYS path by copying `commandline/bootloadHID.exe` from the extracted archive to your MSYS2 installation, typically `C:\msys64\usr\bin`.
+
+For native Windows flashing, the `bootloadHID.exe` can be used outside of the MSYS2 environment.
+
+### Linux Manual Installation
+1. Install libusb development dependency:
+    ```bash
+    # This depends on OS - for Debian the following works
+    sudo apt-get install libusb-dev
+    ```
+2. Download the BootloadHID firmware package:
+    ```
+    wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -O - | tar -xz -C /tmp
+    ```
+3. Build the bootloadHID executable:
+    ```
+    cd /tmp/bootloadHID.2012-12-08/commandline/
+    make
+    sudo cp bootloadHID /usr/local/bin
+    ```
+
+### MacOS Manual Installation
+1. Install Homebrew by typing the following:
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install the following packages:
+    ```
+    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+    ```

docs/fr-FR/ChangeLog/20190830.md

@@ -0,0 +1,52 @@
+# QMK Breaking Change - 30 août 2019
+
+Quatre fois par an, QMK lance un processus pour fusionner les Breaking Changes. Un Breaking Change est un changement qui modifie la manière dont QMK fonctionne introduisant des incompatibilités ou des comportements dangereux. Nous n'effectuons ces changements que 4 fois par an afin que les utilisateurs n'aient pas peur de casser leurs keymaps en mettant à jour leur version de QMK.
+
+Ce document présente les fusions de Breaking Change. Voici la liste des changements.
+
+## Formattage de code Core avec clang-format
+
+* Tous les fichiers core (`drivers/`, `quantum/`, `tests/`, et `tmk_core/`) seront formatés avec clang-format
+* Un processus travis pour reformatter les PRs lors de la fusion a été mis en place
+* Vous pouvez utiliser la nouvelle commande CLI `qmk cformat` afin de formater avant de soumettre votre PR si vous le souhaitez.
+
+## Nettoyage des descripteurs LUFA USB
+
+* Nettoyage du code lié aux descripteurs USB HID sur les claviers AVR, afin de les rendre plus simple à lire et compréhensibles
+* Plus d'information:  https://github.com/qmk/qmk_firmware/pull/4871
+* Normalement pas de changement de fonctionnement et aucune keymap modifiée.
+
+## Migration des entrées de `ACTION_LAYER_MOMENTARY()` dans `fn_actions` vers des keycodes `MO()`
+
+* `fn_actions` est déprécié, et ses fonctionnalités ont été remplacées par des keycodes directs et `process_record_user()`
+* Supprimer cette fonctionnalité obsolète devrait aboutir à une réduction importante de la taille du firmware et de la complexité du code
+* Il est recommandé que toutes les keymaps affectées remplacent `fn_actions` vers les fonctionnalités de [keycode custom](https://docs.qmk.fm/#/custom_quantum_functions) et [macro](https://docs.qmk.fm/#/feature_macros)
+
+## Mise à jour Atreus vers les conventions de codage courantes
+
+* Les doublons include guards ont contourné le comportement de traitement des headers attendu
+* Il est recommandé pour toutes les keymaps affectées de supprimer le doublon de `<keyboard>/config.h` et `<keyboard>/keymaps/<user>/config.h` et de ne garder que des surcharges au niveau keymap
+
+## Récupération des changements de fichier keymap langage de la fork ZSA
+
+* Corrige une issue dans le fichier `keymap_br_abnt2.h` qui inclut la mauvaise souce (`keymap_common.h` au lieu de `keymap.h`)
+* Met à jour le fichier `keymap_swedish.h` afin d'être spécifique au suédois et plus "nordique" en général.
+* Toutes les keymaps qui utilisent ceci devront supprimer `NO_*` et le remplacer par `SE_*`.
+
+## Mise à jour du repo afin d'utiliser LUFA comme un sous-module git
+
+* `/lib/LUFA` supprimé du dépôt
+* LUFA, définis comme un sous-module, pointe vers qmk/lufa
+* Ceci devrait ajouter plus de flexibilité vers LUFA, et nous permet de garder le sous-module à jour bien plus facilement. Il avait environ 2 ans de retard, sans manière simple de corriger. Ce changement devrait simplifier la mise à jour dans le futur.
+
+## Migration des entrées `ACTION_BACKLIGHT_*()` dans `fn_actions` vers des keycodes `BL_`
+
+* `fn_actions` est déprécié, et ses fonctionnalités ont été remplacées par des keycodes directs et `process_record_user()`
+* Toutes les keymaps utilisant ces actions doivent avoir les clés `KC_FN*` remplacées par les clés `BL_*` équivalentes
+* Si vous utilisez actuellement `KC_FN*` vous devrez remplacer `fn_actions` avec les fonctionnalités de [keycode custom](https://docs.qmk.fm/#/custom_quantum_functions) et [macro](https://docs.qmk.fm/#/feature_macros)
+
+## Remplacer l'alias `KC_DELT` par `KC_DEL`
+
+* `KC_DELT` était un alias redondant et non documenté pour `KC_DELETE`
+* Il a été supprimé et toutes ses utilisations ont été remplacées par l'alias plus courant `KC_DEL`
+* Environ 90 keymaps (surtout des boards ErgoDox) ont été modifiées à cette fin

docs/fr-FR/README.md

@@ -0,0 +1,32 @@
+# Quantum Mechanical Keyboard Firmware
+
+[![Version courante](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)
+[![Statut du build](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware)
+[![Discord](https://img.shields.io/discord/440868230475677696.svg)](https://discord.gg/Uq7gcHh)
+[![Statut de la doc](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm)
+[![Contributeurs Github](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
+[![Forks Github](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
+
+## Qu'est-ce que QMK Firmware ?
+
+QMK (*Quantum Mechanical Keyboard*) est une communauté open source qui maintient le firmware QMK, la QMK Toolbox (*Boite à outil*), qmk.fm et leurs documentations. QMK Firmware est un firmware dédié aux claviers qui est basé sur [tmk\_keyboard](http://github.com/tmk/tmk_keyboard). Il offre des fonctionnalités très utiles pour les contrôleurs Atmel AVR, et, plus spécifiquement pour [les produits d'OLKB](http://olkb.com), le clavier [ErgoDox EZ](http://www.ergodox-ez.com), et pour les [produits Clueboard](http://clueboard.co/). Il prend désormais aussi en charge les processeurs ARM qui utilisent ChibiOS. Vous pouvez l'utiliser pour contrôler un clavier personnalisé soudé à la main ou alors sur un clavier avec un PCB personnalisé.
+
+## Comment l'obtenir
+
+Si vous souhaitez contribuer à une disposition de clavier (keymap), ou à des fonctionnalités de QMK alors le plus simple est de [forker le dépôt avec Github](https://github.com/qmk/qmk_firmware#fork-destination-box) puis cloner le dépôt localement pour y faire des changements. Vous pourrez pousser vos changements sur github puis ouvrir un [Pull Request](https://github.com/qmk/qmk_firmware/pulls) depuis votre fork Github.
+
+Sinon, vous pouvez aussi le télécharger directement en ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), ou le cloner avec git en ssh (`git@github.com:qmk/qmk_firmware.git`), ou https (`https://github.com/qmk/qmk_firmware.git`).
+
+## Comment le compiler
+
+Avant d'être prêt à compiler vous allez devoir [installer un environnement](getting_started_build_tools.md) pour les développements AVR et/ou ARM. Une fois ceci fait, vous pourrez utiliser la commande `make` pour compiler le clavier et la disposition avec une commande de ce type :
+
+    make planck/rev4:default
+
+Cette commande compilera la révision `rev4` du clavier `planck` avec la disposition `default`. Notez que tous les claviers n'ont pas forcément de révisions (aussi appelées sous-projects ou dossiers, ou en anglais « subprojects » ou « folder »). Cette option peut donc être omise :
+
+    make preonic:default
+
+## Comment le personnaliser
+
+QMK a beaucoup de [fonctionnalités](features.md) à explorer, et [une documentation](http://docs.qmk.fm) très abondante que vous pourrez parcourir. La plupart des fonctionnalités vous permettrons de modifier vos [dispositions](keymap.md) (keymaps) et de changer [les codes de caractères](keycodes.md) (keycodes).

docs/fr-FR/_summary.md

@@ -0,0 +1,125 @@
+**En Français**
+
+* [Guide pour débutant complet](fr-FR/newbs.md)
+  * [Pour débuter](fr-FR/newbs_getting_started.md)
+  * [Compiler son premier firmware](fr-FR/newbs_building_firmware.md)
+  * [Flasher le Firmware](fr-FR/newbs_flashing.md)
+  * [Test et Débuggage](fr-FR/newbs_testing_debugging.md)
+  * [Bonnes pratiques Git](fr-FR/newbs_best_practices.md)
+  * [Ressources d'apprentissage](fr-FR/newbs_learn_more_resources.md)
+
+* [Les bases de QMK](fr-FR/README.md)
+  * [Indroduction à QMK](fr-FR/getting_started_introduction.md)
+  * [QMK CLI](fr-FR/cli.md)
+  * [Configuration de la CLI QMK](fr-FR/cli_configuration.md)
+  * [Contribuer à QMK](fr-FR/contributing.md)
+  * [Comment utiliser GitHub](fr-FR/getting_started_github.md)
+  * [Trouver de l'aide](fr-FR/getting_started_getting_help.md)
+
+* [Breaking changes](fr-FR/breaking_changes.md)
+  * [30 août 2019](fr-FR/ChangeLog/20190830.md)
+
+**En Anglais**
+
+* [FAQ](faq.md)
+  * [FAQ Générale](faq_general.md)
+  * [Compiler QMK](faq_build.md)
+  * [Débugguer / Dépanner QMK](faq_debug.md)
+  * [Keymap / Disposition](faq_keymap.md)
+  * [Installer les drivers avec Zadig](driver_installation_zadig.md)
+
+* Guides détaillés
+  * [Installation des outils de compilation](getting_started_build_tools.md)
+  * [Guide Vagrant](getting_started_vagrant.md)
+  * [Commandes de compilations](getting_started_make_guide.md)
+  * [Flasher les firmwares](fr-fr/flashing.md)
+  * [Personnaliser les fonctionnalités](custom_quantum_functions.md)
+  * [Aperçu des fonctionnalités des dispositions](keymap.md)
+
+* [Hardware](hardware.md)
+  * [Processeurs AVR](hardware_avr.md)
+  * [Pilotes / Drivers](hardware_drivers.md)
+
+* Réferences
+  * [Lignes de conduite des claviers](hardware_keyboard_guidelines.md)
+  * [Options de configurations](config_options.md)
+  * [Keycodes / Codes des caractères](keycodes.md)
+  * [Conventions de codage - C](coding_conventions_c.md)
+  * [Conventions de codage - Python](coding_conventions_python.md)
+  * [Meilleurs pratiques sur la documentation](documentation_best_practices.md)
+  * [Modèles de documentation](documentation_templates.md)
+  * [Glossaire](reference_glossary.md)
+  * [Tests unitaires](unit_testing.md)
+  * [Fonctions utiles](ref_functions.md)
+  * [Support de configuration](reference_configurator_support.md)
+  * [Format du fichier info.json](reference_info_json.md)
+  * [Développer la CLI en Python](cli_development.md)
+
+* [Fonctionnalités](features.md)
+  * [Keycodes basiques](keycodes_basic.md)
+  * [Touches utilisées avec Shift (US ANSI)](keycodes_us_ansi_shifted.md)
+  * [Keycodes quantiques](quantum_keycodes.md)
+  * [Keycodes avancés](feature_advanced_keycodes.md)
+  * [Fonctionnalités audio](feature_audio.md)
+  * [Majuscule automatique](feature_auto_shift.md)
+  * [Rétroéclairage](feature_backlight.md)
+  * [Bluetooth](feature_bluetooth.md)
+  * [Bootmagic](feature_bootmagic.md)
+  * [Combos](feature_combo.md)
+  * [Commande](feature_command.md)
+  * [API anti-rebond](feature_debounce_type.md)
+  * [DIP Switch](feature_dip_switch.md)
+  * [Macros dynamiques](feature_dynamic_macros.md)
+  * [Interrupteurs rotatifs](feature_encoders.md)
+  * [Grave Escape](feature_grave_esc.md)
+  * [Retour haptique](feature_haptic_feedback.md)
+  * [Contrôleur LCD HD44780](feature_hd44780.md)
+  * [Touche à verrou / Lock-key](feature_key_lock.md)
+  * [Dispositions / layouts](feature_layouts.md)
+  * [Touche leader](feature_leader_key.md)
+  * [Matrice LED](feature_led_matrix.md)
+  * [Macros](feature_macros.md)
+  * [Boutons de souris](feature_mouse_keys.md)
+  * [Pilotes / Drivers OLED](feature_oled_driver.md)
+  * [Touche one-shot](feature_advanced_keycodes.md#one-shot-keys)
+  * [Périphériques de pointage](feature_pointing_device.md)
+  * [Souris PS/2](feature_ps2_mouse.md)
+  * [Éclairage RGB](feature_rgblight.md)
+  * [Matrice RGB](feature_rgb_matrix.md)
+  * [Space Cadet](feature_space_cadet.md)
+  * [Claviers scindés / splittés](feature_split_keyboard.md)
+  * [Stenographie](feature_stenography.md)
+  * [Inversion des mains](feature_swap_hands.md)
+  * [Tap Dance](feature_tap_dance.md)
+  * [Terminale](feature_terminal.md)
+  * [Imprimante thermique](feature_thermal_printer.md)
+  * [Caractères unicodes](feature_unicode.md)
+  * [Dossier utilisateur](feature_userspace.md)
+  * [Velocikey](feature_velocikey.md)
+
+* Pour les makers et les bricoleurs
+  * [Guide des claviers soudés à la main](hand_wire.md)
+  * [Guide de flash de l’ISP](isp_flashing_guide.md)
+  * [Guide du débogage ARM](arm_debugging.md)
+  * [Drivers i2c](i2c_driver.md)
+  * [Contrôles des GPIO](internals_gpio_control.md)
+  * [Conversion en Proton C](proton_c_conversion.md)
+
+* Pour aller plus loin
+  * [Comment fonctionnent les claviers](how_keyboards_work.md)
+  * [Comprendre QMK](understanding_qmk.md)
+
+* Autres sujets
+  * [Utiliser Eclipse avec QMK](other_eclipse.md)
+  * [Utiliser VSCode avec QMK](other_vscode.md)
+  * [Support](support.md)
+  * [Comment ajouter des traductions](translating.md)
+
+* À l’intérieur de QMK (En cours de documentation)
+  * [Définitions](internals_defines.md)
+  * [Input Callback Reg](internals_input_callback_reg.md)
+  * [Appareils Midi](internals_midi_device.md)
+  * [Installation d’un appareil Midi](internals_midi_device_setup_process.md)
+  * [Utilitaires Midi](internals_midi_util.md)
+  * [Fonctions Midi](internals_send_functions.md)
+  * [Outils Sysex](internals_sysex_tools.md)

docs/fr-FR/breaking_changes.md

@@ -0,0 +1,107 @@
+# Breaking changes
+
+Ce document décrit le processus de QMK pour la gestion des breaking changes. Un breaking change est un changement qui modifie la manière dont QMK fonctionne introduisant des incompatibilités ou des comportements dangereux. Nous limitons ces changements afin que les utilisateurs n'aient pas peur de casser leurs keymaps en mettant à jour leur version de QMK.
+
+La période de breaking change est quand nous allons fusionner un PR qui change QMK d'une manière dangereuse ou inattendue. Il y a une période interne de test afin de nous assurer que les problèmes résiduels sont rares ou impossible à prévoir.
+
+## Qu'est-ce qui a été inclus dans des Breaking Changes précédents?
+
+* [30 août 2019](ChangeLog/20190830.md)
+
+## Quand va être le prochain Breaking Change?
+
+Le prochain Breaking Change est planifié pour le 29 novembre.
+
+### Dates importantes
+
+* [x] 21 septembre 2019 - `future` est créé. Il va être rebasé de manière hebdomadaire.
+* [ ] 01 novembre 2019 - `future` fermé aux nouveaux PRs.
+* [ ] 01 novembre 2019 - Appel aux testeurs.
+* [ ] 27 novembre 2019 - `master` est bloqué, pas de PRs fusionnés.
+* [ ] 29 novembre 2019 - `future` est fusionné dans `master`.
+* [ ] 30 novembre 2019 - `master` est débloqué. Les PRs peuvent à nouveau être fusionnés.
+
+## Quels changements seront inclus?
+
+Pour voir une liste de candidats de breaking changes, vous pouvez regarder la liste des [labels `breaking_change`](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+label%3Abreaking_change+is%3Apr). De nouveaux changements peuvent être ajoutés entre maintenant et lorsque `future` est fermée, et un PR avec ce label n'est pas garanti d'être fusionné.
+
+Si vous souhaitez que votre breaking change soit inclus dans ce tour, vous devez créer un PR avec le label `breaking_change` et faire en sorte qu'il soit accepté avant que `future` ne soit fermé. Une fois `future` fermé, aucun nouveau breaking change sera accepté.
+
+Critère d'acceptation:
+
+* Le PR est complété et prêt à fusionner
+* Le PR a un ChangeLog
+
+# Checklists
+
+Cette section documente plusieurs processus que nous utilisons en lançant le processus de Breaking Change.
+
+## Rebase `future` de `master`
+
+Ceci est lancé chaque vendredi tant que `future` est ouvert.
+
+Processus:
+
+```
+cd qmk_firmware
+git checkout master
+git pull --ff-only
+git checkout future
+git rebase master
+git push --force
+```
+
+## Créer la branche `future`
+
+Ceci est fait immédiatement après la fusion de la branche `future` précédente.
+
+* `qmk_firmware` git commands
+    * [ ] `git checkout master`
+    * [ ] `git pull --ff-only`
+    * [ ] `git checkout -b future`
+    * [ ] Modifie `readme.md`
+        * [ ] Ajoute un message en haut qui indique que c'est une branche de test.
+        * [ ] Ajoute un lien vers ce document
+    * [ ] `git commit -m 'Branch point for <DATE> Breaking Change'`
+    * [ ] `git tag breakpoint_<YYYY>_<MM>_<DD>`
+    * [ ] `git tag <next_version>` # Evite que le label point d'arrêt soit confondu par un incrément de version
+    * [ ] `git push origin future`
+    * [ ] `git push --tags`
+
+## 4 Semaines Avant la Fusion
+
+* `future` est maintenant fermé aux nouveaux PRs, seul des correctifs pour les PRs courants peuvent être mergés
+* Envoi de l'appel aux testeurs
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## 1 Semaine Avant la Fusion
+
+* Annonce que master sera fermée entre <2 jours avant> à <Jour de la fusion>
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## 2 Jours Avant la Fusion
+
+* Annonce que master est fermé pour 2 jours
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## Jour de la fusion
+
+* `qmk_firmware` git commands
+    * [ ] `git checkout future`
+    * [ ] `git pull --ff-only`
+    * [ ] `git rebase origin/master`
+    * [ ] Modifie `readme.md`
+        * [ ] Supprimer les notes à propos de `future`
+    * [ ] Regroupe ChangeLog dans un fichier.
+    * [ ] `git commit -m 'Merge point for <DATE> Breaking Change'`
+    * [ ] `git push origin future`
+* Actions sur Github
+    * [ ] Crée un PR pour `future`
+    * [ ] S'assurer que Travis ne relève aucun problème
+    * [ ] Fusion le PR `future`

docs/fr-FR/cli.md

@@ -0,0 +1,146 @@
+# La CLI de QMK
+
+Cette page décrit comment configurer et utiliser la CLI QMK.
+
+# Vue d'ensemble
+
+La CLI de QMK permet de simplifier la compilation et l'interaction avec les claviers QMK. Nous avons défini plusieurs commandes pour simplifier et rationaliser les tâches telles qu'obtenir et compiler le firmware QMK, créer de nouvelles keymaps, et plus.
+
+* [CLI globale](#global-cli)
+* [CLI locale](#local-cli)
+* [Les commandes CLI](#cli-commands)
+
+# Pré-requis
+
+La CLI nécessite Python 3.5 ou plus récent. Nous essayons de limiter le nombre de pré-requis, mais vous allez aussi devoir installer les paquets listés dans le fichier [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt).
+
+# CLI globale
+
+QMK met à disposition une CLI installable qui peut être utilisée pour configurer votre environnement de compilation QMK, fonctionne avec QMK, et qui rend l'utilisation de plusieurs copies de `qmk_firmware` plus simple. Nous recommandons d'installer et de mettre à jour ceci régulièrement.
+
+## Installer en utilisant Homebrew (macOS, quelques Linux)
+
+Si vous avez installé [Homebrew](https://brew.sh) vous pouvez entrer ce qui suit et installer QMK:
+
+```
+brew tap qmk/qmk
+brew install qmk
+export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
+qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
+```
+
+## Installer en utilisant easy_install ou pip
+
+Si votre système n'est pas listé ci-dessus, vous pouvez installer QMK manuellement. Premièrement, vérifiez que vous avez bien installé Python 3.5 (ou plus récent) et pip. Ensuite, installez QMK avec cette commande:
+
+```
+pip3 install qmk
+export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
+qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
+```
+
+## Paquets pour d'autres systèmes d'exploitation
+
+Nous recherchons des gens pour créer et maintenir un paquet `qmk` pour plus de systèmes d'exploitation. Si vous voulez créer un paquet pour votre système d'exploitation, suivez ces directives:
+
+* Suivez les bonnes pratiques pour votre système d'exploitation lorsqu'elles entrent en conflit avec ces directives
+    * Documentez pourquoi dans un commentaire lorsque vous ne les suivez pas
+* Installez en utilisant un virtualenv
+* Expliquez à l'utilisateur de définir la variable d'environnement `QMK_Home` pour "check out" les sources du firmware à un autre endroit que `~/qmk_firmware`.
+
+# CLI locale
+
+Si vous ne voulez pas utiliser la CLI globale, il y a une CLI locale empaquetée avec `qmk_firmware`. Vous pouvez le trouver dans `qmk_firmware/bin/qmk`. Vous pouvez lancer la commande `qmk` depuis n'importe quel répertoire et elle fonctionnera toujours sur cette copie de `qmk_firmware`.
+
+**Exemple**:
+
+```
+$ ~/qmk_firmware/bin/qmk hello
+Ψ Hello, World!
+```
+
+## Limitations de la CLI locale
+
+Il y a quelques limitations à la CLI locale comparé à la globale:
+
+* La CLI locale ne supporte pas `qmk setup` ou `qmk clone`
+* La CLI locale n'opère pas sur le même arbre `qmk_firmware`, même si vous avez plusieurs dépôts clonés.
+* La CLI locale ne s'exécute pas dans un virtualenv, donc il y a des risques que des dépendances seront en conflit
+
+# Les commandes CLI
+
+## `qmk compile`
+
+Cette commande permet de compiler le firmware de n'importe quel répertoire. Vous pouvez compiler des exports JSON de <https://config.qmk.fm> ou compiler des keymaps du dépôt.
+
+**Utilisation pour les exports de configuration**:
+
+```
+qmk compile <configuratorExport.json>
+```
+
+**Utilisation pour les Keymaps**:
+
+```
+qmk compile -kb <keyboard_name> -km <keymap_name>
+```
+
+## `qmk cformat`
+
+Cette commande formatte le code C en utilisant clang-format. Lancez-la sans arguments pour formatter tout le code core, ou passez les noms de fichiers à la ligne de commande pour la lancer sur des fichiers spécifiques.
+
+**Utilisation**:
+
+```
+qmk cformat [file1] [file2] [...] [fileN]
+```
+
+## `qmk config`
+
+Cette commande vous permet de configurer le comportement de QMK. Pour la documentation complète de `qmk config`, regardez [Configuration de CLI](cli_configuration.md).
+
+**Utilisation**:
+
+```
+qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
+```
+
+## `qmk doctor`
+
+Cette commande examine votre environnement et vous alertes des potentiels problèmes de compilation ou de flash.
+
+**Utilisation**:
+
+```
+qmk doctor
+```
+
+## `qmk new-keymap`
+
+Cette commande crée une nouvelle keymap basée sur une keymap par défaut d'un clavier existant.
+
+**Utilisation**:
+
+```
+qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
+```
+
+## `qmk pyformat`
+
+Cette commande formate le code python dans `qmk_firmware`.
+
+**Utilisation**:
+
+```
+qmk pyformat
+```
+
+## `qmk pytest`
+
+Cette commande démarre la suite de test python. Si vous faites des changements dans le code Python, assurez-vous que les tests se lancent avec succès.
+
+**Utilisation**:
+
+```
+qmk pytest
+```

docs/fr-FR/cli_configuration.md

@@ -0,0 +1,121 @@
+# Configuration de QMK CLI
+
+Ce document explique comment fonctionne la commande `qmk config`.
+
+# Introduction
+
+La configuration pour QMK CLI est un système clé/valeur. Chaque clé est composée d'une sous-commande et d'un argument séparé par une virgule. Cela permet une traduction simple et directe entre les clés de configuration et l'argument qu'elle définit.
+
+## Exemple simple
+
+Comme exemple, regardons la commande `qmk compile --keyboard clueboard/66/rev4 --keymap default`.
+
+Il y a deux arguments de ligne de commande qui peuvent être lu de la configuration:
+
+* `compile.keyboard`
+* `compile.keymap`
+
+Essayons de les définir:
+
+```shell
+$ qmk config compile.keyboard=clueboard/66/rev4 compile.keymap=default
+compile.keyboard: None -> clueboard/66/rev4
+compile.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+Maintenant, je peux lancer la commande `qmk compile` sans avoir à spécifier mon clavier et keymap à chaque fois.
+
+## Définir les options par défaut
+
+Parfois, il est utile de partager une configuration entre plusieurs commandes. Par exemple, plusieurs commandes prennent un argument `--keyboard`. Plutôt que de devoir définir cette valeur pour chaque commande, vous pouvez définir une valeur d'utilisateur qui sera utilisée par toutes les commandes qui prennent cet argument.
+
+Exemple:
+
+```
+$ qmk config user.keyboard=clueboard/66/rev4 user.keymap=default
+user.keyboard: None -> clueboard/66/rev4
+user.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+# CLI Documentation (`qmk config`)
+
+La commande `qmk config` est utilisée pour interagir avec la configuration sous-jacente. Lancée sans argument, elle affiche la configuration courante. Lorsque des arguments sont définis, ils sont considérés comme étant des jetons de configuration, qui sont des chaînes de caractère ne contenant aucun espace avec le format suivant:
+
+    <subcommand|general|default>[.<key>][=<value>]
+
+## Définir des valeurs de configuration
+
+Vous pouvez définir des valeurs de configuration en mettant le caractère égal (=) dans votre clé de configuration. La clé doit toujours être dans le format complet `<section>.<key>`.
+
+Exemple:
+
+```
+$ qmk config default.keymap=default
+default.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+## Lire des valeurs de configuration
+
+Vous pouvez lire les valeurs de configuration pour la totalité de la configuration, une seule clé, ou une section entière. Vous pouvez aussi spécifier plusieurs clés pour afficher plus d'une valeur.
+
+### Exemple avec la totalité de la configuration
+
+    qmk config
+
+### Exemple avec une section entière
+
+    qmk config compile
+
+### Exemple avec une clé unique
+
+    qmk config compile.keyboard
+
+### Exemple avec plusieurs clés
+
+    qmk config user compile.keyboard compile.keymap
+
+## Supprimer des valeurs de configuration
+
+Vous pouvez supprimer une valeur de configuration en la définissant avec la chaîne spéciale `None`.
+
+Exemple:
+
+```
+$ qmk config default.keymap=None
+default.keymap: default -> None
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+## Plusieurs opérations
+
+Vous pouvez combiner plusieurs opérations d'écriture et de lecture en une seule commande. Elles seront exécutées et affichées dans l'ordre:
+
+```
+$ qmk config compile default.keymap=default compile.keymap=None
+compile.keymap=skully
+compile.keyboard=clueboard/66_hotswap/gen1
+default.keymap: None -> default
+compile.keymap: skully -> None
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+# Options de configuration utilisateur
+
+| Clé | Valeur par défaut | Description |
+|-----|---------------|-------------|
+| user.keyboard | None | Le chemin d'accès vers le clavier (Exemple: `clueboard/66/rev4`) |
+| user.keymap | None | Le nom de la keymap (Exemple: `default`) |
+| user.name | None | Le nom d'utilisateur GitHub de l'utilisateur. |
+
+# Toutes les options de configuration
+
+| Clé | Valeur par défaut | Description |
+|-----|---------------|-------------|
+| compile.keyboard | None | Le chemin d'accès vers le clavier (Exemple: `clueboard/66/rev4`) |
+| compile.keymap | None | Le nom de la keymap (Exemple: `default`) |
+| hello.name | None | Le nom à saluer lorsque démarré. |
+| new_keyboard.keyboard | None | Le chemin d'accès vers le clavier (Exemple: `clueboard/66/rev4`) |
+| new_keyboard.keymap | None | Le nom de la keymap (Example: `default`) |

docs/fr-FR/contributing.md

@@ -0,0 +1,154 @@
+# Comment contribuer
+
+👍🎉 Premièrement, merci de prendre le temps de lire ceci et de contribuer! 🎉👍
+
+Les contributions de tiers nous aide à améliorer et faire grandir QMK. Nous voulons rendre les pull requests et le processus de contribution utile et simple à la fois pour les contributeurs et les mainteneurs. C'est pourquoi nous avons mis en places des directives pour les contributeurs afin que votre pull request puisse être accepté sans changement majeur.
+
+* [Aperçu du projet](#project-overview)
+* [Conventions de codage](#coding-conventions)
+* [Directives générales](#general-guidelines)
+* [Que veut dire le code de conduite pour moi?](#what-does-the-code-of-conduct-mean-for-me)
+
+## Je ne veux pas lire tout ce pavé! J'ai juste une question!
+
+Si vous voulez poser une question sur QMK, vous pouvez le faire sur le [sous-reddit OLKB](https://reddit.com/r/olkb) ou sur [Discord](https://discord.gg/Uq7gcHh).
+
+Merci de garder ceci en tête:
+
+* Cela peut prendre plusieurs heures pour que quelqu'un réponde à votre question. Merci d'être patient!
+* Tous ceux impliqués avec QMK fait don de son temps et de son énergie. Nous ne sommes pas payés pour travailler sur ou répondre aux questions concernant QMK.
+* Essayez de poser vos questions de manière à ce qu'elles soient le plus simple à répondre possible. Si vous n'êtes pas sûrs de savoir comment faire, voici quelques bon guides (en anglais):
+  * https://opensource.com/life/16/10/how-ask-technical-questions
+  * http://www.catb.org/esr/faqs/smart-questions.html
+
+# Aperçu du projet
+
+QMK est majoritairement écrit en C, avec quelques fonctions et parties spécifiques écrites en C++. Il est destiné aux processeurs intégrés que l'on trouve dans des clavier, particulièrement AVR ([LUFA](http://www.fourwalledcubicle.com/LUFA.php)) et ARM ([ChibiOS](http://www.chibios.com)). Si vous maîtrisez déjà la programmation sur Arduino, vous trouverez beaucoup de concepts et de limitations familiers. Une expérience préalable avec les Arduino n'est pas nécessaire à contribuer avec succès à QMK.
+
+<!-- FIXME: We should include a list of resources for learning C here. -->
+
+# Où trouver de l'aide?
+
+Si vous avez besoin d'aide, vous pouvez [ouvrir une issue](https://github.com/qmk/qmk_firmware/issues) ou [un chat sur Discord](https://discord.gg/Uq7gcHh).
+
+# Comment contribuer?
+
+Vous n'avez encore jamais contribué à un projet open source? Vous vous demandez comment les contributions dans QMK fonctionnent? Voici un aperçu rapide!
+
+0. Enregistrez-vous sur [GitHub](https://github.com).
+1. Définissez une keymap à contribuer, [trouvez une issue](https://github.com/qmk/qmk_firmware/issues) que vous souhaitez corriger, ou [une fonction](https://github.com/qmk/qmk_firmware/issues?q=is%3Aopen+is%3Aissue+label%3Afeature) que vous voulez ajouter.
+2. Créez un fork sur le dépôt associé avec une issue sur votre compte GitHub. Cela veut dire que vous allez avoir une copie du dépôt sous `votre-login-GitHub/qmk_firmware`.
+3. Clonez le dépôt sur votre machine locale en utilisant `git clone https://github.com/login-github/repository-name.git`.
+4. Si vous travaillez sur une nouvelle fonctionnalité, pensez à ouvrir une issue pour parler avec nous du travail que vous souhaitez démarrer.
+5. Créez une nouvelle branche pour votre correctif en utilisant `git checkout -b nom-de-branche`.
+6. Faites les changements nécessaires pour corriger le problème ou ajouter la fonctionnalité.
+7. Utilisez `git add chemin-de-fichier` pour ajouter les contenus des fichiers modifiés au "snapshot" que git utilise pour gérer l'état du projet, appelé aussi l'index.
+8. Utilisez `git commit -m "Insérez une description courte des changements (en anglais)"` pour enregistrer le contenu de l'index avec un message descriptif.
+9. Poussez les changements vers votre dépôt sur GitHub en utilisant `git push origin nom-de-branche`.
+10. Créez un pull request sur [QMK Firmware](https://github.com/qmk/qmk_firmware/pull/new/master).
+11. Donnez un titre à votre pull request en utilisant une description courte des changements que vous avez fait et ajoutez le numéro de l'issue ou du bug associé avec votre changement. Les commentaires de PR devraient se faire en anglais de préférence. Par exemple, vous pouvez utiliser un titre tel que celui-là: "Added more log outputting to resolve #4352".
+12. Dans la description du pull request, expliquez les changements que vous avez fait et tous les problèmes qui existent, selon vous, sur le pull request que vous avez fait. Vous pouvez aussi utiliser la description pour poser des questions au mainteneur. Il n'est pas nécessaire que votre pull request soit parfait (aucun pull request ne l'est), le reviewer sera là pour vous aider à résoudre les problèmes et l'améliorer!
+13. Attendez que le pull request soit revu par un mainteneur.
+14. Faites des changements au pull request si le mainteneur le recommande.
+15. Célébrez votre succès une fois votre pull request fusionné!
+
+# Conventions de codage
+
+La grande majorité de notre style est plutôt simple à comprendre. Si vous connaissez C ou Python, vous ne devriez pas avoir trop de difficulté avec notre style.
+
+* [Conventions de codage - C](coding_conventions_c.md)
+* [Conventions de codage - Python](coding_conventions_python.md)
+
+# Directives générales
+
+Nous avons un certain nombre de type de changements dans QMK, chacun nécessitant un niveau de rigueur différent. Nous voulons que vous gardiez les directives suivantes en tête quel que soit le changement que vous êtes en train de faire.
+
+* Séparez les PR dans des unités logiques. Par exemple, ne soumettez pas un PR qui couvre deux fonctionnalités séparées, soumettez plutôt un PR pour chaque fonctionnalité.
+* Vérifiez les espaces blancs non nécessaires avec `git diff --check` avant de commit.
+* Assurez-vous que votre code compile.
+  * Keymaps: Assurez-vous que `make keyboard:your_new_keymap` ne renvoie pas d'erreur.
+  * Claviers: Assurez-vous que `make keyboard:all` ne renvoie pas d'erreur.
+  * Core: Assurez-vous que `make all` ne renvoie pas d'erreur.
+* Assurez-vous que les messages de commit soient compréhensibles d'eux-mêmes. Vous devriez écrire une description simple (pas plus de 70 caractères) sur la première ligne, suivi d'une ligne vide, suivi d'un détail de votre commit, si nécessaire. Exemple:
+
+```
+Adjust the fronzlebop for the kerpleplork
+
+The kerpleplork was intermittently failing with error code 23. The root cause was the fronzlebop setting, which causes the kerpleplork to activate every N iterations.
+
+Limited experimentation on the devices I have available shows that 7 is high enough to avoid confusing the kerpleplork, but I'd like to get some feedback from people with ARM devices to be sure.
+```
+
+## Documentation
+
+La documentation est l'une des manières les plus simples de démarrer la contribution sur QMK. Il est simple de trouver des endroits où la documentation est fausse ou incomplète, et il est tout aussi simple de la corriger! Nous avons aussi grandement besoin de quelqu'un pour éditer notre documentation, donc si vous avez des compétences en édition mais que vous n'êtes pas sûr de savoir où aller, n'hésitez pas [demandez de l'aide](#where-can-i-go-for-help)!
+
+Vous trouverez toute notre documentation dans le répertoire `qmk_firmware/docs`, ou si vous préférez utiliser des outils web, vous pouvez cliquer sur le bouton "Suggest An Edit" en haut de chaque page sur http://docs.qmk.fm/.
+
+Lorsque vous donnez des exemples de code dans la documentation, essayez de suivre les conventions de nommage utilisées ailleurs dans la documentation. Par exemple, standardisez les enums en utilisant `my_layers` ou `my_keycodes` afin de garder une consistance:
+
+```c
+enum my_layers {
+  _FIRST_LAYER,
+  _SECOND_LAYER
+};
+
+enum my_keycodes {
+  FIRST_LAYER = SAFE_RANGE,
+  SECOND_LAYER
+};
+```
+
+## Keymaps
+
+La plupart des contributeurs débutants démarrent avec leurs keymaps personnelles. Nous essayons de garder les standards pour les keymaps pluôt simple (les keymaps reflètent, après tout, la personnalité de leurs créateurs) mais nous demandons que vous suiviez les directives suivantes afin que d'autres puissent découvrir et apprendre de votre keymap.
+
+* Ecrivez un fichier `readme.md` en utilisant [la template](documentation_templates.md).
+* Tous les PR de keymaps doivent être "squashés", donc si la manière dont vos commits sont squashés vous est important, vous devez le faire vous-même.
+* Ne regroupez pas des fonctionnalités avec votre PR de keymap. Envoyez d'abord votre fonctionnalité, puis créez un second PR pour la keymap.
+* N'incluez pas de fichier `Makefile` dans votre dossier de keymap (ils ne sont plus utilisés)
+* Mettez à jour les copyrights dans les en-têtes de fichiers (cherchez `%YOUR_NAME%`)
+
+## Claviers
+
+Les claviers sont la raison d'être de QMK. Certains claviers sont maintenus par la communauté, alors que d'autre sont maintenus par les gens responsables de la création du clavier. Le fichier `readme.md` devrait vous informer de qui maintient le clavier. Si vous avez des questions concernant un clavier en particulier, vous pouvez [Ouvrir une issue](https://github.com/qmk/qmk_firmware/issues) et tagger le mainteneur dans votre question.
+
+Nous vous demandons aussi que vous suiviez ces directives:
+
+* Ecrivez un fichier `readme.md` en utilisant [le template](documentation_templates.md).
+* Gardez un nombre de commits raisonnable, ou nous squasherons votre PR.
+* Ne regroupez pas des fonctionnalités avec le PR pour votre clavier. Envoyez d'abord votre fonctionnalité, puis créez un second PR pour le clavier.
+* Appelez les fichiers `.c`/`.h` du nom du dossier parent, par exemple `/keyboards/<kb1>/<kb2>/<kb2>.[ch]`
+* N'incluez pas de fichier `Makefile` dans votre dossier de keymap (ils ne sont plus utilisés)
+* Mettez à jour les copyrights dans les en-têtes de fichiers (cherchez `%YOUR_NAME%`)
+
+## Quantum/TMK Core
+
+Faites attention d'être sûr d'implémenter votre nouvelle fonctionnalité de la meilleure manière qu'il soit avant d'investir beaucoup de travail à son développement. Vous pouvez apprendre les bases de QMK en lisant [Comprendre QMK](understanding_qmk.md), qui vous donnera une idée du flux du programme QMK. A partir de là, parlez nous afin de définir la meilleure façon d'implémenter votre idée. Il y a deux façons principale de le faire:
+
+* [Chat sur Discord](https://discord.gg/Uq7gcHh)
+* [Ouvrir une Issue](https://github.com/qmk/qmk_firmware/issues/new)
+
+Les PR de nouvelles fonctionnalités de de correction de bug affectent tous les claviers. Nous sommes aussi dans un processus de restructuration de QMK. Pour cette raison, il est absolument nécessaire que tout changement important ou significatif soit discuté avant que l'implémentation soit faite. Si vous ouvrez un PR sans nous avoir parlé, préparez-vous à faire des refontes significatives si vos changements ne sont pas compatibles avec ce que nous avons planifié.
+
+Voici quelques choses à garder en tête lorsque vous travaillez sur une fonctionnalité ou un bug fix.
+
+* **Désactivé par défaut** - la mémoire est plutôt limitée sur la plupart des puces que QMK supporte, et il est important que les keymaps courantes ne soient pas cassées. S'il vous plaît faites que vos features doivent être **activées** plutôt que désactivées. Si vous pensez qu'elle devrait être activée par défaut, ou que cela réduit la taille du code, parlez-nous-en.
+* **Compilez localement avant de soumettre** - Cela devrait aller sans dire, mais votre code doit compiler! Notre système Travis devrait relever les problèmes, mais il est généralement plus rapide de compiler quelques claviers en local plutôt que d'attendre le retour des résultats
+* **Faites attention aux révisions et différentes bases de puces** - beaucoup de claviers ont des révisions qui permettent des changements de configuration mineurs, voir des bases de chip différentes. Essayez de faire que votre fonctionnalité soit supportée à la fois sur ARM et AVR, ou désactivez-là automatiquement sur les plateformes non supportées.
+* **Expliquez votre fonctionnalité** - Documentez-là dans `docs/`, soit dans un nouveau fichier, ou dans une partie d'un fichier existant. Si vous ne la documentez pas, personne ne pourra bénéficier de votre dur labeur.
+
+Nous vous demandons aussi de suivre ces directives:
+
+* Gardez un nombre de commits raisonnable, ou nous squasherons votre PR.
+* Ne regroupez pas des claviers ou des keymaps avec des changements core. Soumettez vos changements core en premier.
+* Ecrivez des [Tests Unitaires](unit_testing.md) pour votre fonctionnalité.
+* Suivez le style du fichier que vous modifiez. Si le style n'est pas clair ou qu'il y a un mélange de fichiers, vous devriez vous conformer aux [conventions de codage](#coding-conventions) au dessus.
+
+## Refactoriser
+
+Afin de maintenir une vision claire sur comment les choses sont architectuées dans QMK, nous essayons de planifier des refactorisations en profondeur et qu'un collaborateur fasse le changement. Si vous avez une idée de refactorisation, ou une suggestion, [ouvrez une issue] [open an issue](https://github.com/qmk/qmk_firmware/issues), nous adorons discuter de comment améliorer QMK.
+
+# Que veut dire le code de conduite pour moi?
+
+Note [Code De Conduite](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) veut dire que vous avez la responsabilité de traiter tout le monde dans le projet avec respect et courtoisie, peu importe leur identité. Si vous êtes victime d'une attitude ou de commentaires inappropriés, tels que décrit dans notre Code de Conduite, nous sommes là pour vous et nous ferons de notre mieux pour nous assurer que le fautif soit réprimandé, tel que décrit dans notre code.

docs/fr-FR/flashing.md

@@ -0,0 +1,239 @@
+# Instructions pour flasher et informations sur les bootloader
+
+Les claviers utilisent différents types de bootloaders et certains doivent être flashés différement. Heureusement, certains projets comme la [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) ont pour objectifs de permettre de flasher les différents bootloader sans trop se faire de soucis et ça peu importe les manières de les flasher.
+
+Si vous avez un bootloader sélectionné avec la variable `BOOTLOADER` dans votre fichier `rules.mk` alors QMK vas automatiquement calculer si votre fichier .hex n'est pas trop grand pour être flashé sur votre appareil, et il affichera la taille finale du firmware. Pour vérifier la taille manuellement, vous pouvez aussi compiler le firmware avec l'option `check-size`. Exemple : `make planck/rev4:default:check-size`.
+
+## DFU
+
+Le bootloader pour les processeurs Atmel DFU est fourni par défaut sur tous les processeurs atmega32u4. Celui-ci est utilisé par beaucoup de claviers plus vieux que les OLKB et Clueboard qui ont leur propre ICs sur leurs PCBs. D'autres claviers utilisent le bootloader DFU de LUFA (ou son fork QMK), notamment les nouveaux claviers OLKB. Ce dernier ajoute des fonctionnalités spécifiques sur le matériel.
+
+Pour vérifier la compatibilité avec le bootloader DFU, vérifiez que ce bloc de code est présent dans votre fichier `rules.mk`. Parfois il peut être inscrit `lufa-dfu` ou `qmk-dfu` à la place.
+
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+```
+
+Méthodes de flash compatibles :
+
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (interface graphique recommandé)
+* [dfu-programmer](https://github.com/dfu-programmer/dfu-programmer) / `:dfu` avec QMK (outil en ligne de commande recommandé)
+* [Atmel's Flip](http://www.microchip.com/developmenttools/productdetails.aspx?partno=flip) (non recommandé)
+
+Ordre des actions :
+
+1. Pressez le keycode `RESET`, ou appuyez sur le bouton physique RESET ou alors créez un contact entre RST et GND.
+2. Attendez que l'OS detecte l'appareil.
+3. Éffacez la mémoire, cela peut être fait automatiquement.
+4. Flasher le fichier .hex.
+5. Redémarrez l'appareil en mode « application », cela peut être fait automatiquement.
+
+Alternativement :
+
+    make <keyboard>:<keymap>:dfu
+
+### DFU QMK
+
+QMK a un fork du bootloader LUFA DFU qui vous permet de faire un simple scan de la matrice pour quitter le bootloader et retourner à l'application. En même temps que le flash se produira, il est possible de faire flasher un led ou de produire un son via un haut parleur. Pour activer ces fonctionnalités, vous pouvez utiliser ce bloc dans votre fichier `config.h` (La touche permettant de quitter le bootloader a besoin d'être reliée entre les ports définis en INPUT et OUTPUT ici):
+
+    #define QMK_ESC_OUTPUT F1 // usually COL
+    #define QMK_ESC_INPUT D5 // usually ROW
+    #define QMK_LED E6
+    #define QMK_SPEAKER C6
+
+Le fabricant et le nom du produit proviennent de vos définitions dans fichier  `config.h`, et la chaîne de caractère « bootloader » est ajoutée au nom du produit.
+
+Pour génerer le bootloader, utilisez la cible `bootloader`. Exemple : `make planck/rev4:default:bootloader`.
+
+Pour génerer un fichier .hex prêt pour la production qui contiendra tant l'application que le bootloader, utilisez la cible `production`. Exemple : `make planck/rev4:default:production`.
+
+### Commandes DFU
+
+Il y a plusieurs commandes DFU que vous pouvez utiliser pour flasher le firmware sur un appareil DFU.
+
+* `:dfu` - C'est l'option normale qui attend qu'un appareil DFU soit disponible et qui flashe le firmware dès que c'est le cas. La vérification sera faite toutes les 5 secondes.
+* `:dfu-ee` - Cette option flash un fichier `.eep` à la place d'un fichier `.hex`. Ce cas est plutôt rare.
+* `:dfu-split-left` - Cette option flashe le firmware normal comme avec l'option (`:dfu`). Mais cela aussi flash le coté gauche du fichier EEPROM pour les claviers scindés. _C'est l'option idéale pour un clavier scindé basé sur le Elite C_
+* `:dfu-split-right` - Cette option flashe le firmware normal comme avec l'option (`:dfu`).  Mais cela aussi flash le coté droite du fichier EEPROM pour les claviers scindés. _C'est l'option idéale pour un clavier scindé basé sur le Elite C_
+
+## Caterina
+
+Les cartes arduinos et leurs clones utilisent le [bootloader Caterina](https://github.com/arduino/ArduinoCore-avr/tree/master/bootloaders/caterina) (tous les claviers utilisant un Pro Micro, ou un clone). Ils utilisent aussi le protocole avr109 pour communiquer en virtuellement en série (serial en anglais). Les bootloaders comme le [A-Star](https://www.pololu.com/docs/0J61/9) sont basés sur Caterina.
+
+Pour vérifier la compatibilité avec un bootloader Caterina, vérifiez que ce bloc est présent dans votre fichier `rules.mk` :
+
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+```
+
+Flashers compatibles :
+
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (Interface graphique recommandée)
+* [avrdude](http://www.nongnu.org/avrdude/) avec avr109 / `:avrdude` (Outil en ligne de commande recommandé)
+* [AVRDUDESS](https://github.com/zkemble/AVRDUDESS)
+
+Séquence de flash : 
+
+1. Pressez la touche avec le keycode `RESET`, ou reliez les ports GND et RST. Vous n'avez que 7 secondes pour flasher une fois que l'opération a été faite.
+2. Attendez que l'OS détecte l'appareil.
+3. Flasher le fichier .hex.
+4. Attendez que l'appareil redémarre automatiquement.
+
+ou, utilisez :
+
+    make <keyboard>:<keymap>:avrdude
+
+#### Commandes Caterina 
+
+Il existe un certain nombre de commandes DFU que vous pouvez utiliser pour mettre à jour le firmware sur un périphérique DFU:
+
+* `: avrdude` - Il s’agit de l’option normale. Le script va attendre qu’un appareil Caterina soit disponible. Dès que c’est le cas, il flash le firmware. Il attendra de détecter un nouveau port COM pour le flasher.
+* `: avrdude-loop` - Cela fonctionne de la même manière que`: avrdude`, mais une fois que chaque périphérique est flashé, il tentera de flasher à nouveau. Cela peut être utile pour flasher plusieurs claviers à la suite. _Cela implique de sortir manuellement de la boucle en appuyant sur Ctrl + C, Cmd + C ou un raccourci équivalent selon votre OS_
+* `: avrdude-split-left` - Cela fonctionne de la même manière que la fonction (`: avrdude`). Toutefois, cela permet aussi de flasher le coté gauche de l'EEPROM des claviers splittés / divisés. C'est donc la méthode recommandée pour les claviers splittés avec Pro Micro.
+* `: avrdude-split-right` - Cela fonctionne de la même manière que la fonction (`: avrdude`). Toutefois, cela permet aussi de flasher le coté droite de l'EEPROM des claviers splittés / divisés. C'est donc la méthode recommandée pour les claviers splittés avec Pro Micro.
+
+## Halfkay
+
+Halfkay est un protocole ultra-simple développé par PJRC qui utilise HID et qui est fourni avec tous les Teensys après le modèle 2.0.
+
+Pour vérifier la compatibilité avec le booloader Halfkay, vérifiez que ce bloc est présent dans votre fichier `rules.mk` :
+
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
+```
+
+Flasher compatibles :
+
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (Interface graphique recomandée)
+* [Teensy Loader](https://www.pjrc.com/teensy/loader.html) (petit utilitaire ultra simple)
+ [Teensy Loader en ligne de commande](https://www.pjrc.com/teensy/loader_cli.html) (Outil en ligne de commande recommandé)
+
+Séquence de flash :
+
+1. Pressez la touche du keycode `RESET`, ou reliez les ports RST et GND rapidement. Vous avez ensuite 7 secondes pour réaliser le flash.
+2. Attendez que l'OS détecte l'appareil.
+3. Flasher le fichier .hex.
+4. Redémarrez l'appareil en mode « application ». Cela peut être fait automatiquement.
+
+## USBasploader
+
+USBasploader est un bootloader développé par matrixstorm. Il est utilisé sur des processeurs AVR non-USB comme le ATmega328P, qui fonctionne grâce à V-USB.
+
+Pour vérifier la compatibilité avec le booloader USBasploader, vérifiez que ce bloc est présent dans votre fichier `rules.mk` :
+
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = USBasp
+```
+
+Flashers compatibles :
+
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (Interface graphique recommandé)
+* [avrdude](http://www.nongnu.org/avrdude/) avec le programmeur `usbasp`.
+* [AVRDUDESS](https://github.com/zkemble/AVRDUDESS)
+
+Séquence de flash :
+
+1. Pressez la touche du keycode `RESET`, ou reliez le port de boot pendant que RST et GND snt reliés. Cela doit être fait très rapidement.
+2. Attendez que l'OS détecte l'appareil.
+3. Flasher le fichier .hex.
+4. Redémarrez l'appareil en mode « application ». Cela peut être fait automatiquement.
+
+## BootloadHID
+
+BootloadHID est un bootloader pour les microcontrôleurs AVR. L'utilitaire de téleversement ne demande pas de drivers au niveau du kernel et peut être lancé sans installer aucune DLLs.
+
+Pour vérifier la compatibilité avec le bootloader bootloadHID, vérifiez que ce bloc existe dans votre fichier `rules.mk` : 
+
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = bootloadHID
+```
+
+Utilitaires de flash compatibles :
+
+* [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash) (Utilitaire avec interface graphique recommandé)
+* [bootloadhid Command Line](https://www.obdev.at/products/vusb/bootloadhid.html) / `:BootloadHID` avec QMK (utilitaire en ligne de commande recommandé)
+
+Séquence de flash
+
+1. Entrez dans le bootloader en utilisant l'une de ces méthodes :
+    * Pressez la touche du keycode `RESET` (Cela ne fonctionnera pas sur certains appareils).
+    * Verrouillez la touche « Salt » tout en branchant le clavier (Généralement ce principe est documenté dans le fichier readme du clavier)
+2. Attendez que l'OS détecte l'appareil.
+3. Flasher le fichier .hex.
+4. Redémarrez l'appareil en mode « application ». Cela peut être fait automatiquement.
+
+Ou alors :
+
+    make <keyboard>:<keymap>:bootloadHID
+
+## STM32
+
+Tous les processeurs STM32 contiennent un bootloader installé en usine qui ne peut pas être modifié ou supprimé. Certains processeurs STM32 ont des bootloaders qui ne peuvent pas être programmés par USB (ex : STM32F103) mais le processus reste le même.
+
+Pour le moment, aucune variable `BOOTLOADER` n'est nécessaire dans le fichier `rules.mk`.
+
+Flashers compatibles :
+
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (interface graphique recommandé)
+* [dfu-util](https://github.com/Stefan-Schmidt/dfu-util) / `:dfu-util` (utilitaire en ligne de commande recommandé)
+
+Séquence pour flasher:
+
+1. Entrez dans le bootloader en utilisant l'une de ces méthodes :
+    * Utilisez une touche sur laquelle le keycode `RESET` (Cela peut ne pas fonctionner sur les appareils STM32F042)
+    * Si un circuit de réinitialisation (Reset) est présent alors utilisé le bouton qui lui est dédié.
+    * Autrement, vous devez réaliser une liaison entre BOOT0 et VCC (en appuyant sur le bouton ou à l'aide d'un pont) puis faire un pont entre RESET et GND et enfin relacher le pont BOOT0.
+2. Attendre que l'os détecte l'appareil.
+3. Flasher un fichier `.bin`.h
+    * Vous allez recevoir un avertissement à propos de la signature DFU. Ignorez-la.
+4. Réinitialisez l'appareil en mode « application ». Cela peut être fait automatiquement.
+    * Si vous êtes en train de travailler en ligne de commande, par exemple avec un `make planck/rev6:default:dfu-util` alors soyez bien sur que l'argument `:leave` est passé aux arguments DFU grâce à la variable `DFU_ARGS` à l'intérieur de votre fichier `rules.mk` (Ex : `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) afin que votre appareil redémarre après avoir été flashé.
+
+### Commandes STM32
+
+Il y a différentes commandes que vous pouvez utiliser pour flasher un firmware dans un appareil STM32  :
+
+* `:dfu-util` - C'est l'option standard pour flasher un appareil STM32. Le script attendra qu'un bootloader STM32 soit présent.
+* `:dfu-util-split-left` - Permet de flasher un firmware normalement, tout comme l'option précédente mais permet de configurer le côté gauche des paramètres EEPROM sur un clavier scindé.
+* `:dfu-util-split-right` - Permet de flasher un firmware normalement, tout comme l'option précédente mais permet de configurer le côté droit des paramètres EEPROM sur un clavier scindé.
+* `:st-link-cli` - Cela permet de flasher le firmware avec l'utilitaire en ligne de commande ST-LINK's plutôt que d'utiliser dfu-util.

docs/fr-FR/getting_started_getting_help.md

@@ -0,0 +1,15 @@
+# Trouver de l'aide
+
+Il y a beaucoup de ressources pour trouver de l'aide avec QMK.
+
+## Chat temps-réel
+
+Vous trouverez des développeurs QMK et des utilisateurs sur notre [Serveur Discord](https://discord.gg/Uq7gcHh) principal. Il y a des canaux spécifiques dans le serveur pour discuter des firmwares, toolbox, hardware et configurateurs.
+
+## Sous-Reddit OLKB
+
+Le forum officiel de QMK est [/r/olkb](https://reddit.com/r/olkb) sur [reddit.com](https://reddit.com).
+
+## Tickets GitHub
+
+Vous pouvez ouvrir un [ticket sur GitHub](https://github.com/qmk/qmk_firmware/issues). Ceci est spécialement pratique lorsque votre problème demande une discussion sur le long terme ou un débugage.

docs/fr-FR/getting_started_github.md

@@ -0,0 +1,61 @@
+# Comment utiliser GitHub avec QMK
+
+GitHub peut être un peu compliqué pour ceux qui n'y sont pas familier. Ce guide va vous expliquer chaque étape de "fork", clone et envoi d'un pull request avec QMK.
+
+?> Ce guide part du principe que vous êtes suffisamment à l'aise pour envoyer commandes sur la ligne de commande et que vous avez Git installé sur votre système.
+
+Commencez par la [page GitHub de QMK](https://github.com/qmk/qmk_firmware), et vous verrez un bouton dans le coin en haut à droite qui indique "Fork":
+
+![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
+
+Si vous faites partie d'une organisation, vous aurez besoin de savoir quel compte utiliser pour le fork. Dans la plupart des cas, vous voudrez créer le fork dans votre compte personnel. Une fois le fork complet (cela peut quelques fois prendre un peu de temps), appuyez sur le bouton "Clone or download":
+
+![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
+
+Faites attention à sélectionner "HTTPS", et sélectionnez le lien et copiez-le:
+
+![HTTPS link](http://i.imgur.com/eGO0ohO.jpg)
+
+Ensuite, entrez `git clone` dans la ligne de commande, et collez votre lien:
+
+```
+user@computer:~$ git clone https://github.com/whoeveryouare/qmk_firmware.git
+Cloning into 'qmk_firmware'...
+remote: Counting objects: 46625, done.
+remote: Compressing objects: 100% (2/2), done.
+remote: Total 46625 (delta 0), reused 0 (delta 0), pack-reused 46623
+Receiving objects: 100% (46625/46625), 84.47 MiB | 3.14 MiB/s, done.
+Resolving deltas: 100% (29362/29362), done.
+Checking out files: 100% (2799/2799), done.
+```
+
+Vous avez maintenant votre fork QMK sur votre machine locale, vous pouvez ajouter votre keymap, la compiler et la flasher sur votre board. Une fois heureux avec vos changements, vous pouvez les ajouter, commit, et pousser vers votre fork comme suit:
+
+```
+user@computer:~$ git add .
+user@computer:~$ git commit -m "adding my keymap"
+[master cccb1608] adding my keymap
+ 1 file changed, 1 insertion(+)
+ create mode 100644 keyboards/planck/keymaps/mine/keymap.c
+user@computer:~$ git push
+Counting objects: 1, done.
+Delta compression using up to 4 threads.
+Compressing objects: 100% (1/1), done.
+Writing objects: 100% (1/1), 1.64 KiB | 0 bytes/s, done.
+Total 1 (delta 1), reused 0 (delta 0)
+remote: Resolving deltas: 100% (1/1), completed with 1 local objects.
+To https://github.com/whoeveryouare/qmk_firmware.git
+ + 20043e64...7da94ac5 master -> master
+```
+
+Vos changements existent maintenant dans votre fork sur GitHub. Si vous allez à cette adresse (`https://github.com/<whoeveryouare>/qmk_firmware`), vous pouvez créer un nouveau "Pull Request" en cliquant sur ce bouton:
+
+![New Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
+
+Maintenant, vous pourrez voir exactement ce que vous avez commité. Si ça vous semble bien, vous pouvez le finaliser en cliquant sur "Create Pull Request":
+
+![Create Pull Request](http://i.imgur.com/Ojydlaj.jpg)
+
+Une fois transmis, nous pourrons vous parler de vos changements, vous demander de faire des changements, et éventuellement de les accepter!
+
+Merci de contribuer à QMK :)

docs/fr-FR/getting_started_introduction.md

@@ -0,0 +1,62 @@
+# Introduction
+
+Le but de cette page est d'expliquer les informations de base qui vous serons nécessaire pour travailler sur le projet QMK. Il a pour pré-requis que vous soyez familier à la navigation à l'aide d'un shell Unix, mais ne s'attend pas à ce que vous soyez familier avec C ou la compilation en utilisant make.
+
+## Structure de base de QMK
+
+QMK est un fork du projet [tmk_keyboard](https://github.com/tmk/tmk_keyboard) créé par [Jun Wako](https://github.com/tmk). Le code originel de TMK, avec quelques modifications, se trouve dans le dossier `tmk`. Les additions que QMK amène au projet se trouvent dans le dossier `quantum`. Les projets de clavier se trouvent dans les dossiers `handwired` et `keyboard`.
+
+### Structure du Userspace
+
+Dans le dossier `users` se trouve un répertoire pour chaque utilisateur. C'est un endroit où les utilisateurs peuvent mettre du code qui serait partagé entre plusieurs claviers. Merci de lire la documentation  [Fonctionnalité Userspace](feature_userspace.md) pour plus d'information.
+
+### Structure du projet clavier
+
+Dans le dossier `keyboards`, son sous-dossier `handwired` et ses sous-dossiers pour les revendeurs et fabriquants (par exemple `clueboard`) se trouve un répertoire pour chaque projet clavier. Par exemple `qmk_firmware/keyboards/clueboard/2x1800`.
+
+A l'intérieur, vous trouverez la structure suivante:
+
+* `keymaps/`: différentes keymaps qui peuvent être compilées
+* `rules.mk`: Ce fichier définit les options "make" par défaut. Ne modifiez pas ce fichier directement, utilisez à la place un `rules.mk` spécifique à la keymap.
+* `config.h`: Ce fichier définit les options de compilation par défaut. Ne modifiez pas ce fichier directement, utilisez à la place un `config.h` spécifique à la keymap.
+* `info.json`: Le fichier utilisé pour définir les options de layout de QMK Configurator. Voyez [Support Configurator](reference_configurator_support.md) pour plus d'information.
+* `readme.md`: une brève description du clavier.
+* `<keyboardName>.h`: Ce fichier définit le layout du fichier par rapport à la matrice de commutation.
+* `<keyboardName>.c`: Ce fichier définit du code custom pour le clavier.
+
+Pour plus d'information sur la structure du projet, voyez [Directives clavier QMK](hardware_keyboard_guidelines.md).
+
+### Structure d'une Keymap
+
+Dans chaque dossier keymap, vous allez trouver les fichiers suivants. Seul le fichier `keymap.c` est nécessaire, et si le reste des fichiers n'existent pas, les options par défaut seront choisies.
+
+* `config.h`: les options de configuration de votre keymap
+* `keymap.c`: tout le code de votre keymap, requis
+* `rules.mk`: les features de QMK qui sont activées
+* `readme.md`: une description de votre keymap, comment d'autres l'utiliseront, et des explications des fonctionnalités. Uploadez les images vers un service comme imgur.
+
+# Le fichier `config.h`
+
+Le fichier `config.h` peut être mis à 3 endroits:
+
+* keyboard (`/keyboards/<keyboard>/config.h`)
+* userspace (`/users/<user>/config.h`)
+* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/config.h`)
+
+Le système de compilation cherche automatiquement les fichiers de configuration dans l'ordre au-dessus. Si vous souhaitez surcharger une configuration définie par un `config.h` précédent, vous devrez d'abord ajouter le code suivant.
+
+```
+#pragma once
+```
+
+Ensuite, pour surcharger l'option du fichier `config.h` précédent, vous devez `#undef` puis `#define` l'option à nouveau.
+
+Voici à quoi l'ensemble du code ressemble une fois regroupé:
+
+```
+#pragma once
+
+// overrides go here!
+#undef MY_SETTING
+#define MY_SETTING 4
+```

docs/fr-FR/newbs.md

@@ -0,0 +1,23 @@
+# Le Guide pour débutant complet à QMK
+
+QMK est un firmware Open Source pour votre clavier mécanique. Vous pouvez utiliser QMK pour customiser votre clavier de manière simple et puissante. Tout le monde, du débutant complet au développeur avancé, ont utilisé avec succès QMK pour customiser leur clavier. Ce guide vous aidera à faire de même, quelles que soient vos compétences.
+
+Vous voulez savoir si votre clavier peut utiliser QMK? Si c'est un clavier mécanique que vous avez vous-même construit, il y a de bonnes chances que vous pouvez. Nous supportons un [grand nombre de "hobbyist boards"](http://qmk.fr/keyboards), donc même si votre clavier ne peut pas utiliser QMK, vous ne devriez pas avoir trop de problème pour en trouver un qui vous convienne.
+
+## Vue d'ensemble
+
+Il y a 7 sections principales dans ce guide:
+
+* [Pour débuter](fr-FR/newbs_getting_started.md)
+* [Compiler votre premier firmware en utilisant la ligne de commande](fr-FR/newbs_building_firmware.md)
+* [Compiler votre premier firmware en utilisant l'interface graphique en ligne](fr-FR/newbs_building_firmware_configurator.md)
+* [Flasher le Firmware](fr-FR/newbs_flashing.md)
+* [Test et Débuggage](fr-FR/newbs_testing_debugging.md)
+* [Bonnes pratiques Git](fr-FR/newbs_best_practices.md)
+* [Ressources d'apprentissage](fr-FR/newbs_learn_more_resources.md)
+
+Ce guide a pour but principal d'aider quelqu'un qui n'a jamais compilé de logiciel avant. Les recommandations et les choix qu'il contient vont donc dans ce sens. Il y a des méthodes alternatives pour beaucoup de ces procédures, et nous supportons la plupart de ces alternatives. Si vous avez un doute sur comment accomplir une tâche, vous pouvez [nous demander de l'aide](fr-FR/getting_started_getting_help.md).
+
+## Ressources additionnelles
+
+* [Thomas Baart's QMK Basics Blog](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – Un blog créé par un utilisateur qui couvre les bases de l'utilisation du Firmware QMK, vue d'un point de vue d'un nouvel utilisateur (anglais).

docs/fr-FR/newbs_best_practices.md

@@ -0,0 +1,161 @@
+# Bonnes Pratiques
+
+## Ou, "Comment j'ai appris à ne plus m'en faire et aimer Git."
+
+Ce document a pour but d'apprendre aux novices les meilleures solutions pour faciliter la contribution à QMK. Nous allons étudier le processus de contribution à QMK, détaillant quelques moyens de rendre cette tâche plus simple. Nous allons faire quelques erreurs afin de vous apprendre à les résoudre.
+
+Ce document suppose les choses suivantes:
+
+1. Vous avez un compte GitHub, et avez [créé un "fork" pour le dépôt qmk_firmware](fr-FR/getting_started_github.md) avec votre compte.
+2. Vous avez [configuré votre environnement de compilation](fr-FR/newbs_getting_started.md?id=environment-setup).
+
+## La branche master de votre fork: Mettre à jour souvent, ne jamais commit
+
+Il est hautement recommandé pour le développement de QMK, peu importe ce qui est fait ou où, de garder votre branche `master` à jour, mais de ne ***jamais*** commit dessus. A la place, faites tous vos changements dans une branche de développement et crééz des "pull requests" de votre branche lorsque vous développez.
+
+Pour réduire les chances de conflits de fusion (merge) — des cas où deux ou plus d'utilisateurs ont édité la même section d'un fichier en parallèle — gardez votre branche `master` relativement à jour et démarrez chaque nouveau développement en créant une nouvelle branche.
+
+### Mettre à jour votre branche master
+
+Pour garder votre branche `master` à jour, il est recommandé d'ajouter le dépôt du firmware QMK comme un dépôt distant (remote) dans git. pour se faire, ouvrez votre interface de ligne de commande Git et entrez:
+
+```bash
+git remote add upstream https://github.com/qmk/qmk_firmware.git
+```
+
+Pour vérifier que le dépôt a bien été ajouté, lancez la commande `git remote -v`, qui devrait retourner le résultat suivant:
+
+```bash
+$ git remote -v
+origin  https://github.com/<your_username>/qmk_firmware.git (fetch)
+origin  https://github.com/<your_username>/qmk_firmware.git (push)
+upstream        https://github.com/qmk/qmk_firmware.git (fetch)
+upstream        https://github.com/qmk/qmk_firmware.git (push)
+```
+
+Maintenant que c'est fait, vous pouvez vérifier les mises à jour au dépôt en lançant `git fetch upstream`. Cela récupère les branches et les tags &mdash; appelé de manière générale "refs" &mdash; du dépôt QMK, qui a maintenant le surnom `upstream`. Nous pouvons maintenant comparer les données sur notre "fork" `origin` à celles contenues par QMK.
+
+Pour mettre à jour la branche master de votre "fork", lancez les commandes suivantes (en appuyant sur Enter après chaque ligne):
+
+```bash
+git checkout master
+git fetch upstream
+git pull upstream master
+git push origin master
+```
+
+Cela vous change la branche courante en master, synchronise les données de références du dépôt QMK vers votre ordinateur. La commande pull tire les données de références vers votre branche courante puis les y téleverse. La commande push permet de pousser la branche courante (master) vers votre fork github.
+
+### Faire des changements
+
+Pour faire des changements, créez une nouvelle branche en entrant:
+
+```bash
+git checkout -b dev_branch
+git push --set-upstream origin dev_branch
+```
+
+Ceci crée une branche nommée `dev_branch`, bascule vers cette branche, et ensuite sauvegarde cette nouvelle branche vers votre fork. L'argument `--set-upstream` demande à git d'utiliser votre fork et la branche `dev_branch` à chaque fois que vous utilisez `git push` ou `git pull` depuis cette branche. Vous ne devez l'utiliser que pour le premier "push", après cela, vous pouvez utiliser simplement `git push` ou `git pull`, sans le reste des arguments.
+
+!> Avec `git push`, vous pouvez utiliser `-u` à la place de `--set-upstream` &mdash; `-u` est un alias pour `--set-upstream`.
+
+Vous pouvez appeler votre branche à peu près comme vous voulez, toutefois il est recommandé d'utiliser un nom qui est lié aux changements que vous allez faire.
+
+Par défaut, `git checkout -b` va faire de la branche actuelle la branche de base de votre nouvelle branche. Vous pouvez définir la base de votre nouvelle branche comme étant n'importe quelle branche existante qui n'est pas la courante en utilisant la commande:
+
+```bash
+git checkout -b dev_branch master
+```
+
+Maintenant que vous avez une branche de développement, ouvrez votre éditeur de texte et faites vos changements. Il est recommandé de faire beaucoup de petits commits dans votre branche. Ainsi, un changement qui crée un problème peut être plus facilement retracé et annulé si nécessaire. Pour faire un changement, éditez et sauvez n'importe quel fichier qui doit être mis à jour, ajoutez les à la *zone de staging* de Git, et commitez les vers votre branche:
+
+```bash
+git add path/to/updated_file
+git commit -m "My commit message."
+```
+
+`git add` ajoute les fichiers qui ont été changés dans la *zone de staging* de Git, qui est sa "zone de chargement". Elle contient tous les changements qui vont être *validés* (committed) par `git commit`, qui sauvegarde les changements vers le dépôt. Utilisez des messages de validation descriptifs afin que vous puissiez savoir ce qui a changé d'un coup d'oeil.
+
+!> Si vous changez beaucoup de fichiers, mais tous les fichiers font partie du même changement, vous pouvez utiliser `git add .` pour ajouter tous les fichiers changés dans le répertoire courant, plutôt que d'avoir à ajouter chaque fichier individuellement.
+
+### Publier Vos Changements
+
+La dernière étape est de pousser vos changements vers votre fork. Pour ce faire, entrez `git push`. Git publie maintenant l'état courant de `dev_branch` vers votre fork.
+
+## Résoudre Les Conflits De Merge
+
+Parfois, lorsque votre travail sur une branche met beaucoup de temps à se compléter, des changements réalisés par d'autres peuvent entrer en conflit avec les changements que vous avez fait sur votre branche au moment où vous avez ouvert un pull request. Ceci est appelé un *conflit de merge*, et c'est ce qui arrive lorsque plusieurs personnes modifient les mêmes parties de mêmes fichiers.
+
+### Rebaser Vos Changements
+
+Un *rebase* est la manière pour Git de prendre les changements qui ont été faits à un point, les annuler, et les réappliquer sur un autre point. Dans le cas d'un conflit de merge, vous pouvez rebaser votre branche pour récupérer les changements qui ont été faits entre le moment où vous avez créé votre branche et le présent.
+
+Pour démarrer, lancez les commandes suivantes:
+
+```bash
+git fetch upstream
+git rev-list --left-right --count HEAD...upstream/master
+```
+
+La commande `git rev-list` retourne le nombre de commits qui diffère entre la branche courante et la branche master de QMK. Nous lançons `git fetch` en premier afin d'être sûr que les refs qui représentent l'état courant du dépôt upstream soient à jour. Le résultat de la commande `git rev-list` retourne deux nombres:
+
+```bash
+$ git rev-list --left-right --count HEAD...upstream/master
+7       35
+```
+
+Le premier nombre représente combien il y a eu de commits sur la branche courante depuis qu'elle a été créée, et le second nombre est combien de commits ont été faits sur la branche `upstream/master` depuis que la branche a été créée et, ainsi, les changements qui ne sont pas enregistrés sur la branche courante.
+
+Maintenant que l'état actuel de la branche courante et la branche upstream sont connus, nous pouvons maintenant démarrer une opération de rebase:
+
+```bash
+git rebase upstream/master
+```
+
+Ceci dit à Git d'annuler les commits de la branche courante puis de les réappliquer sur la branche master de QMK.
+
+```bash
+$ git rebase upstream/master
+First, rewinding head to replay your work on top of it...
+Applying: Commit #1
+Using index info to reconstruct a base tree...
+M       conflicting_file_1.txt
+Falling back to patching base and 3-way merge...
+Auto-merging conflicting_file_1.txt
+CONFLICT (content): Merge conflict in conflicting_file_1.txt
+error: Failed to merge in the changes.
+hint: Use 'git am --show-current-patch' to see the failed patch
+Patch failed at 0001 Commit #1
+
+Resolve all conflicts manually, mark them as resolved with
+"git add/rm <conflicted_files>", then run "git rebase --continue".
+You can instead skip this commit: run "git rebase --skip".
+To abort and get back to the state before "git rebase", run "git rebase --abort".
+```
+
+Ceci nous dit que nous avons un conflit de merge, et nous donne le nom du fichier en conflit. Ouvrez le fichier conflictuel dans votre éditeur de texte et, quelque part dans le fichier, vous trouverez quelque chose comme ça:
+
+```bash
+<<<<<<< HEAD
+<p>For help with any issues, email us at support@webhost.us.</p>
+=======
+<p>Need help? Email support@webhost.us.</p>
+>>>>>>> Commit #1
+```
+
+La ligne `<<<<<<< HEAD` montre le début d'un conflit de merge et la ligne `>>>>>>> Commit #1` indique la fin, avec les sections conflictuelles séparées par `=======`. La partie du côté `HEAD` vient de la version du fichier provenant de la branche master de QMK, et la partie marquée avec le numéro du commit provient de la branche courrante.
+
+Parce que Git suis *les changements des fichiers*, plutôt que les contenus des fichiers directement, si Git ne peut pas trouver le texte qu'il y avait dans le fichier avant que le commit soit fait, il ne saura pas comment modifier le fichier. Modifier le fichier à nouveau va résoudre le conflit. Faites votre changement, et sauvez le fichier.
+
+```bash
+<p>Need help? Email support@webhost.us.</p>
+```
+
+Maintenant, lancez:
+
+```bash
+git add conflicting_file_1.txt
+git rebase --continue
+```
+
+Git enregistre le changement dans le fichier conflictuel, et continue à appliquer les commits depuis votre branche jusqu'à ce qu'il arrive à la fin.

docs/fr-FR/newbs_building_firmware.md

@@ -0,0 +1,81 @@
+# Compiler Votre Premier Firmware
+
+Maintenant que vous avez configuré votre environnement de build, vous être prêts à compiler un firmware customisé. Pour cette section, nous allons utiliser trois programmes différents: votre explorateur de fichier, votre éditeur de texte et votre fenêtre de terminal. Gardez les 3 ouverts jusqu'à ce que vous ayez terminé et soyez content de votre firmware de clavier.
+
+Si vous avez fermé et rouvert votre fenêtre de terminal depuis le démarrage de ce guide, n'oubliez pas de `cd qmk_firmware` afin que votre terminal soit dans le bon répertoire.
+
+## Naviguez vers votre répertoire keymaps
+
+Démarrez par naviguer dans le répertoire `keymaps` de votre clavier.
+
+?> Si vous êtes sous macOS ou Windows, il y a des commandes que vous pouvez utiliser pour facilement ouvrir le dossier keymaps.
+
+?> macOS:
+
+    open keyboards/<keyboard_folder>/keymaps
+
+?> Windows:
+
+    start .\\keyboards\\<keyboard_folder>\\keymaps
+
+## Créez une copie de la keymap `default`
+
+Une fois le dossier `keymaps` ouvert, créez une copie du répertoire `default`. Nous vous recommandons de nommer ce répertoire de la même manière que votre nom d'utilisateur GitHub. Vous pouvez aussi utiliser le nom que vous voulez, tant qu'il contient uniquement des lettres minuscules, des nombres et le caractère souligné (_).
+
+Afin d'automatiser ce processus, vous avez aussi l'option de lancer le script `new_keymap.sh`.
+
+Naviguez vers le répertoire `qmk_firmware/util` et tapez ce qui suit:
+
+```
+./new_keymap.sh <keyboard path> <username>
+```
+
+Par exemple, pour un utilisateur s'appeleant John, essayant de créer une nouvelle keymap pour le 1up60hse, il taperait:
+
+```
+./new_keymap.sh 1upkeyboards/1up60hse john
+```
+
+## Ouvrez `keymap.c` dans votre éditeur de texte préféré
+
+Ouvrez votre fichier `keymap.c`. Dans ce fichier, vous trouverez la structure qui contrôle comment votre clavier se comporte. En haut du fichier `keymap.c` il peut y avoir quelques `defines` et `enums` qui rendent la keymap plus simple à lire. Plus bas, vous trouverez une ligne telle que celle-ci:
+
+    const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+Cette ligne indique le début d'une liste de calques (layers). En dessous, vous trouverez des lignes contenant soit `LAYOUT`, soit `KEYMAP` et ces lignes indiquent le début d'un calque. En dessous de cette ligne se trouve la liste des touches qui comprennent ce calque particulier.
+
+!> Lorsque vous éditez votre fichier keymap, faites attention à ne pas ajouter ou enlever une virgule. Si vous le faites, vous aller empêcher votre firmware de compiler et il ne sera pas facile de trouver où la virgule est manquante ou en trop.
+
+## Customisez le layout à votre goût
+
+Libre à vous de choisir comment compléter cette étape. Faites le petit changement qui vous dérange ou retravaillez tout de zéro. Vous pouvez supprimer des calques si vous ne les utilisez pas tous, ou ajouter des calques jusqu'à un maximum de 32. Vérifiez la documentation suivante pour trouver ce que vous pouvez définir ici:
+
+* [Keycodes](keycodes.md)
+* [Fonctionnalités](features.md)
+* [FAQ](faq.md)
+
+?> Lorsque vous découvrez comment des keymaps fonctionnent, faites de petits changements. De gros changements rendent le débuggage des problèmes éventuels plus difficile.
+
+## Compilez votre firmware
+
+Lorsque les changements de votre keymap sont complets, vous allez devoir compiler le firmware. Pour ce faire, retournez à votre terminal et lancez la commande de compilation:
+
+    make <my_keyboard>:<my_keymap>
+
+Par exemple, si votre keymap s'appelle "xyverz" et vous compilez une keymap pour une plank rev5, vous allez utiliser cette commande:
+
+    make planck/rev5:xyverz
+
+Durant la compilation, vous allez avoir beaucoup de messages sur l'écran vous informant de quels fichiers sont en train d'être compilés. Il devrait se terminer avec des messages qui ressemblent comme suit:
+
+```
+Linking: .build/planck_rev5_xyverz.elf                                                              [OK]
+Creating load file for flashing: .build/planck_rev5_xyverz.hex                                      [OK]
+Copying planck_rev5_xyverz.hex to qmk_firmware folder                                               [OK]
+Checking file size of planck_rev5_xyverz.hex                                                        [OK]
+ * File size is fine - 18392/28672
+```
+
+## Flasher votre firmware
+
+Allez sur la page [Flasher le firmware](fr-FR/newbs_flashing.md) pour apprendre comment écrire votre nouveau firmware sur votre clavier.

docs/fr-FR/newbs_building_firmware_configurator.md

@@ -0,0 +1,105 @@
+# Configurateur de QMK
+
+Le [Configurateur de QMK](https://config.qmk.fm) est une interface graphique en ligne permettant de générer des fichiers "hex" du firmware de QMK.
+
+?> **S'il vous plaît, suivez les étapes suivantes dans l'ordre.**
+
+Regardez le [Tutoriel vidéo](https://youtu.be/tx54jkRC9ZY)
+
+Le configurateur de QMK fonctionne mieux avec Chrome et Firefox.
+
+!> **Les fichiers d'autres outils, tels que KLE ou kbfirmware ne seront pas compatibles avec le configurateur QMK. Ne les chargez pas, ne les importez pas. Le configurateur QMK est un outil DIFFERENT.**
+
+## Sélectionner votre clavier
+
+Cliquez la boîte déroulante et sélectionnez le clavier pour lequel vous voulez créer une keymap.
+
+?> Si votre clavier a plusieurs versions, faites attention à utiliser la bonne.
+
+Je vais le répéter, parce que c'est important
+
+!> **FAITES ATTENTION A UTILISER LA BONNE VERSION !**
+
+Si votre clavier est annoncé comme fonctionnant grâce à QMK mais n'est pas dans la liste, il y a des chances que le développeur ne l'ait pas encore fait, ou que nous n'avons pas encore eu le temps de le merger. Ajoutez un problème (issue) sur [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) demandant le support de votre clavier, s'il n'y a pas de [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) ouvert pour lui. Il y a aussi des claviers alimentés par QMK qui sont sur le compte GitHub du fabricant, il est bon de le vérifier aussi.
+
+## Sélectionner la disposition de votre clavier
+
+Choisissez la disposition (layout) qui représente le mieux la keymap que vous voulez créer. Certains claviers n'ont pas encore assez de dispositions ou des dispositions incorrectes. Ils seront supportés dans le future.
+
+## Nom de la Keymap
+
+Appelez cette keymap comme vous voulez.
+
+?> Si vous rencontrez des problèmes lors de la compilation, il peut être utile de changer ce nom, il peut déjà exister dans le dépôt du firmware QMK.
+
+## Créer votre keymap
+
+Entrer un keycode peut s'accomplir de 3 façons différentes.
+
+1. Glisser déposer
+2. Cliquer sur un endroit vide sur le layout et cliquer sur le keycode souhaité
+3. Cliquer sur un endroit vide sur le layout et appuyer sur une touche physique de votre clavier.
+
+Passez votre souris au dessus d'une touche et un affichage vous dira quel est le rôle du keycode. Pour une version plus verbeuse suivre:
+
+[Référence Keycode basique](https://docs.qmk.fm/#/keycodes_basic)
+[Référence Keycode avancé](https://docs.qmk.fm/#/feature_advanced_keycodes)
+
+Dans le cas où vous ne trouvez pas une disposition qui supporte votre keymap, par exemple trois places pour une barre d'espace, ou deux places pour retour clavier, ou deux places pour shift, etc. etc. remplissez les TOUTES.
+
+### Exemples
+
+3 places pour la barre d'espace: Remplissez les TOUTES avec la barre d'espace
+
+2 places pour un retour clavier: Remplissez les DEUX avec un retour clavier
+
+2 places pour un shift droit: Remplissez les DEUX avec un shift droit
+
+1 place pour un shift gauche et 1 place pour le support ISO: Remplissez les deux avec un shift gauche
+
+5 places, mais seulement 4 touches: Deviner et vérifier, ou demander à quelqu'un qui l'a déjà fait.
+
+## Sauvez votre keymap pour des éditions futures
+
+Une fois satisfait de votre keymap, ou si vous souhaitez revenir travailler dessus plus tard, appuyez sur le bouton `Export Keymap`. Il vous permettra de sauvegarder votre keymap avec le nom choisi au dessus suivi de .json.
+
+Vous pouvez ensuite charger ce fichier .json à nouveau en appuxant sur le bouton `Import Keymap`.
+
+!> **ATTENTION** Ce n'est pas le même type de fichier .json utilisé pour kbfirmware.com ou n'importe quel autre outil. Si vous essayez d'utiliser ce fichier pour d'autres outil, ou le fichier .json d'autres outils avec le configurateur QMK, il y a des chances que votre clavier **explose**.
+
+## Générer votre fichier firmware
+
+Appuyez sur le bouton `Compile`.
+
+Une fois la compilation terminée, vous pourrez appuyer sur le bouton vert `Download Firmware`.
+
+## Ecrire votre firmware sur votre clavier
+
+Merci de vous référer à [Flasher le Firmware](fr-FR/newbs_flashing.md)
+
+## Dépannage
+
+#### Mon fichier json ne fonctionne pas
+
+Si le fichier .json a été généré par le configurateur QMK, bravo vous avez trouvé un bug. Merci d'ouvrir une issue sur [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)
+
+Sinon... vous avez raté mon message écris en gras qui dit de ne pas utiliser d'autres fichiers .json?
+
+#### Il y a des espaces en trop dans mon alyout? Qu'est-ce que je fais?
+
+Si vous voulez dire que vous avez trois places pour une barre d'espace, le mieux est de les remplir tous avec une barre d'espace. Vous pouvez faire de même avec les retour clavier et les shift.
+
+#### C'est quoi le keycode pour .......
+
+Merci de regarder
+
+[Référence keycode basique](https://docs.qmk.fm/#/keycodes_basic)
+[Référence keycode avancé](https://docs.qmk.fm/#/feature_advanced_keycodes)
+
+#### Ca ne compile pas?
+
+Merci de vérifier les autres dispositions de votre keymap afin d'être sûr qu'il n'y a pas de touches aléatoires.
+
+## Problèmes et Bugs
+
+Nous acceptons toujours les demandes des clients et les rapports de bugs. Merci de les remplirs sur [qmk_configurator](https://github.com/qmk/qmk_configurator/issues)

docs/fr-FR/newbs_flashing.md

@@ -0,0 +1,367 @@
+# Flasher votre clavier
+
+Maintenant que vous avez compilé un firmware custom, vous allez vouloir le flasher dans votre clavier.
+
+## Flasher votre clavier avec QMK Toolbox
+
+La manière la plus simple de flasher votre clavier est avec [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases).
+
+Toutefois, la QMK Toolbox n'est actuellement disponible que pour Windows et macOS. Si vous utilisez Linux (ou préférez flasher le firmware depuis la ligne de commande), vous devrez utiliser [la métode décrite ci-dessous](newbs_flashing.md#flash-your-keyboard-from-the-command-line).
+
+### Charger le fichier dans QMK Toolbox
+
+Démarrez en ouvrant l'application QMK Toolbox. Cherchez le fichier de firmware dans Finder ou Explorer. Vore firmware de clavier peut être dans un de deux formats `.hex` ou `.bin`. QMK essaye de copier le bon format pour votre clavier du répertoire racine `qmk_firmware`.
+
+?> Si vous êtes sous Windows ou macOS il y a des commandes que vous pouvez utiliser pour facilement ouvrir le répertoire firmware dans Explorer ou Finder.
+
+?> Windows:
+
+    start .
+
+?> macOS:
+
+    open .
+
+Le fichier firmware suit toujours ce format de nommage:
+
+    <keyboard_name>_<keymap_name>.{bin,hex}
+
+Par exemple, le `plank/rev5` avec une keymap `default` aura ce nom de fichier:
+
+    planck_rev5_default.hex
+
+Une fois que vous aurez trouvé votre fichier de firmware, glissez le dans la boîte "Local file" sur QMK Toolbox, ou cliquez sur "Open" et naviguez où votre firmware est enregistré.
+
+### Mettez votre clavier en mode DFU (Bootloader)
+
+Afin de flasher votre firmware custom, vous devez mettre votre clavier dans un mode spécial. Lorsqu'il sera dans ce mode, vous ne pourrez pas taper ou utiliser votre clavier. Il est très important que vous ne débranchiez pas votre clavier ou n'arrêtiez pas le processus d'écriture du firmware.
+
+Chaque clavier a une manière différente d'entrer dans ce mode spécial. Si votre clavier tourne actuellement QMK ou TMK et vous n'avez pas reçu d'instruction spécifiques, essayez, dans cet ordre:
+
+* Enfoncez les deux touches shift et appuyez sur `Pause`
+* Enfoncez les deux touches shift et appuyez sur `B`
+* Débranchez votre clavier, gardez shift la barre d'espace et `B` en même temps, branchez votre clavier et attendez une seconde avant de relâcher les touches.
+* Appuyez la touche physique `RESET` en bas du PCB
+* Trouvez les pins sur le PCB marquées `BOOT0` ou `RESET`, court circuitez ces pins en branchant votre PCB
+
+Lorsque vous aurez réussi, vous verrez le message suivant dans QMK Toolbox:
+
+```
+*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
+*** DFU device connected
+```
+
+### Flasher votre clavier
+
+Appuyez sur le boutton `Flash` dans QMK Toolbox. Vous verrez un résultat similaire à ce qui suit:
+
+```
+*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
+*** DFU device connected
+*** Attempting to flash, please don't remove device
+>>> dfu-programmer atmega32u4 erase --force
+    Erasing flash...  Success
+    Checking memory from 0x0 to 0x6FFF...  Empty.
+>>> dfu-programmer atmega32u4 flash /Users/skully/qmk_firmware/clueboard_66_hotswap_gen1_skully.hex
+    Checking memory from 0x0 to 0x55FF...  Empty.
+    0%                            100%  Programming 0x5600 bytes...
+    [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
+    0%                            100%  Reading 0x7000 bytes...
+    [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
+    Validating...  Success
+    0x5600 bytes written into 0x7000 bytes memory (76.79%).
+>>> dfu-programmer atmega32u4 reset
+
+*** DFU device disconnected
+*** Clueboard - Clueboard 66% HotSwap connected -- 0xC1ED:0x2390
+```
+
+## Flashez votre clavier à l'aide de la ligne de commande
+
+C'est désormais relativement simple. Lorsque vous êtes prêt à compiler et à flasher votre firmware, ouvrez la fenêtre de votre terminal et exécutez la commande de build :
+
+    make <my_keyboard>:<my_keymap>:flash
+
+Par exemple, si votre keymap s'appelle "xyverz" et que vous fabriquez une keymap pour un clavier `planck` de version `rev5` vous devrez utiliser cette commande:
+
+    make planck/rev5:xyverz:flash
+
+La commande va vérifier la configuration du clavier, puis tentera de le flasher en fonction du bootloader (chargeur d’amorçage) spécifié. Cela signifie que vous n'avez pas besoin de savoir quel bootloader votre clavier utilise. Exécutez simplement la commande et laissez-le faire le gros du travail.
+
+Cependant, tout dépend du bootloader qui est installé sur le clavier. Si cette information n’est pas configurée ou si vous tentez de flasher un clavier qui ne permet pas d’être flashé alors vous obtiendrez cette erreur :
+
+    WARNING: This board's bootloader is not specified or is not supported by the ":flash" target at this time.
+
+Dans ce cas, vous devrez choisir le bootloader.
+
+Il y a cinq bootloaders principaux. Les Pro-Micro et les clones utilisent Caterina, les Teensy utilisent Halfkay, les claviers AVR d’OLKB utilisent QMK-DFU, certains controleurs atmega32u4 utilisent DFU et la plupart des controlleurs ARM utilisent ARM DFU.
+
+Vous pouvez trouver plus d'information à propos des bootloaders sur la page [Instructions de flash et information sur le Bootloader](flashing.md).
+
+Si vous savez quel bootloader vous utilisez, lorsque vous compilez le firmware, vous pouvez ajouter quelques options à la commande `make` pour automatiser le processus de flash.
+
+### DFU
+
+Pour le bootloader DFU, lorsque vous êtes prêts à compiler et flasher votre firmware, ouvrez votre fenêtre de terminal et lancez la commande de compilation:
+
+    make <my_keyboard>:<my_keymap>:dfu
+
+Par exemple, si vous keymap s'appelle "xyverz" et vous compilez une keymap pour une plank rev5, vous utiliserez cette commande:
+
+    make planck/rev5:xyverz:dfu
+
+Une fois la compilation terminée, le résultat devrait être le suivant:
+
+```
+Linking: .build/planck_rev5_xyverz.elf                                                              [OK]
+Creating load file for flashing: .build/planck_rev5_xyverz.hex                                      [OK]
+Copying planck_rev5_xyverz.hex to qmk_firmware folder                                               [OK]
+Checking file size of planck_rev5_xyverz.hex
+ * File size is fine - 18574/28672
+ ```
+
+Une fois arrivé à ce stade, le script de compilation va chercher le bootloader DFU toutes les 5 secondes. Il va répéter les messages suivants jusqu'à ce que l'appareil soit trouvé ou que vous l'annuliez.
+
+    dfu-programmer: no device present.
+    Error: Bootloader not found. Trying again in 5s.
+
+Une fois terminé, vous devrez mettre à zéro le contrôleur. Vous allez voir un résultat similaire à ceci:
+
+```
+*** Attempting to flash, please don't remove device
+>>> dfu-programmer atmega32u4 erase --force
+    Erasing flash...  Success
+    Checking memory from 0x0 to 0x6FFF...  Empty.
+>>> dfu-programmer atmega32u4 flash /Users/skully/qmk_firmware/clueboard_66_hotswap_gen1_skully.hex
+    Checking memory from 0x0 to 0x55FF...  Empty.
+    0%                            100%  Programming 0x5600 bytes...
+    [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
+    0%                            100%  Reading 0x7000 bytes...
+    [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
+    Validating...  Success
+    0x5600 bytes written into 0x7000 bytes memory (76.79%).
+>>> dfu-programmer atmega32u4 reset
+```
+
+?> Si vous avez des soucis concernant ceci - par exemple `dfu-programmer: no device present` - merci de regarder [Foires Aux Questions de Compilation](faq_build.md).
+
+#### Commandes DFU
+
+Il y  aun certain nombre de commandes du DFU que vous pouvez utiliser pour flasher un firmware sur un device DFU:
+
+* `:dfu` - C'est l'option standard qui attends jusqu'à e qu'un appareil DFU soit disponible, puis flash le firmware. Il va vérifier toutes les 5 secondes, afin de voir si un appareil DFU est apparu.
+* `:dfu-ee` - Ceci flash un fichier `eep` à la place du standard hex, peu commun.
+* `:dfu-split-left` - Ceci flash le firmware standard, comme la commande standard (`:dfu`). Toutefois, elle flash aussi les fichiers EEPROM du "côté gauche" pour les claviers scindés. _C'est l'option idéale pour les claviers scindés basés sur Elite C._
+* `:dfu-split-right` - Ceci flash le firmware standard, comme la commande standard (`:dfu`). Toutefois, elle flash aussi les fichiers EEPROM du "côté droit" pour les claviers scindés. _C'est l'option idéale pour les claviers scindés basés sur Elite C._
+
+### Caterina
+
+Pour les boards Arduino et leurs clones (tel que le SparkFun ProMicro), lorsque vous êtes prêt à compiler et flasher votre firmware, ouvrez votre terminal et lancer la commande de compilation:
+
+    make <my_keyboard>:<my_keymap>:avrdude
+
+Par exemple, si votre keymap se nomme "xyverz" et que vous compilez une keymap pour un Lets Split rev2, vous utiliserez la commande suivante:
+
+    make lets_split/rev2:xyverz:avrdude
+
+Une fois le firmware compilé, vous aurez le résultat suivant:
+
+```
+Linking: .build/lets_split_rev2_xyverz.elf                                                            [OK]
+Creating load file for flashing: .build/lets_split_rev2_xyverz.hex                                    [OK]
+Checking file size of lets_split_rev2_xyverz.hex                                                      [OK]
+ * File size is fine - 27938/28672
+Detecting USB port, reset your controller now..............
+```
+
+Une fois ceci fait, réinitialisez votre board et le script va détecter et flasher le firmware. La sortie devrait ressembler à quelque chose comme ça:
+
+```
+Detected controller on USB port at /dev/ttyS15
+
+Connecting to programmer: .
+Found programmer: Id = "CATERIN"; type = S
+    Software Version = 1.0; No Hardware Version given.
+Programmer supports auto addr increment.
+Programmer supports buffered memory access with buffersize=128 bytes.
+
+Programmer supports the following devices:
+    Device code: 0x44
+
+avrdude.exe: AVR device initialized and ready to accept instructions
+
+Reading | ################################################## | 100% 0.00s
+
+avrdude.exe: Device signature = 0x1e9587 (probably m32u4)
+avrdude.exe: NOTE: "flash" memory has been specified, an erase cycle will be performed
+             To disable this feature, specify the -D option.
+avrdude.exe: erasing chip
+avrdude.exe: reading input file "./.build/lets_split_rev2_xyverz.hex"
+avrdude.exe: input file ./.build/lets_split_rev2_xyverz.hex auto detected as Intel Hex
+avrdude.exe: writing flash (27938 bytes):
+
+Writing | ################################################## | 100% 2.40s
+
+avrdude.exe: 27938 bytes of flash written
+avrdude.exe: verifying flash memory against ./.build/lets_split_rev2_xyverz.hex:
+avrdude.exe: load data flash data from input file ./.build/lets_split_rev2_xyverz.hex:
+avrdude.exe: input file ./.build/lets_split_rev2_xyverz.hex auto detected as Intel Hex
+avrdude.exe: input file ./.build/lets_split_rev2_xyverz.hex contains 27938 bytes
+avrdude.exe: reading on-chip flash data:
+
+Reading | ################################################## | 100% 0.43s
+
+avrdude.exe: verifying ...
+avrdude.exe: 27938 bytes of flash verified
+
+avrdude.exe: safemode: Fuses OK (E:CB, H:D8, L:FF)
+
+avrdude.exe done.  Thank you.
+```
+
+Si vous avez un souci, essayez de faire ceci:
+
+    sudo make <my_keyboard>:<my_keymap>:avrdude
+
+#### Commandes Caterina 
+
+Il existe un certain nombre de commandes DFU que vous pouvez utiliser pour mettre à jour le firmware sur un périphérique DFU:
+
+* `: avrdude` - Il s’agit de l’option normale. Elle attend qu’un appareil Caterina soit disponible, puis tente de flasher le firmware. Il attendra de détecter un autre port COM, puis il flashera à nouveau.
+* `: avrdude-loop` - Cela fonctionne de la même manière que `: avrdude`, mais une fois que chaque périphérique est flashé, il tentera de flasher à nouveau. Cela peut être utile pour flasher plusieurs claviers à la suite. _Cela implique de sortir manuellement de la boucle en appuyant sur Ctrl + C, Cmd + C ou un raccourci équivalent selon votre OS_
+* `: avrdude-split-left` - Cela fonctionne de la même manière que la fonction (`: avrdude`). Toutefois, cela permet aussi de flasher le coté gauche de l'EEPROM des claviers splittés / divisés. C'est donc la méthode recommandée pour les claviers splittés avec Pro Micro.
+* `: avrdude-split-right` - Cela fonctionne de la même manière que la fonction (`: avrdude`). Toutefois, cela permet aussi de flasher le coté droite de l'EEPROM des claviers splittés / divisés. C'est donc la méthode recommandée pour les claviers splittés avec Pro Micro.
+
+### HalfKay
+
+Pour les composants PJRC (les Teensy), lorsque vous êtes prêts à compiler et flasher votre firmware, ouvrez votre fenêtre de terminal et lancez la commande de compilation suivante:
+
+    make <my_keyboard>:<my_keymap>:teensy
+
+Par exemple, si vous keymap s'appelle "xyverz" et vous compilez une keymap pour un Ergodox ou un Ergodox EZ, vous utiliserez cette commande:
+
+    make ergodox_ez:xyverz:teensy
+
+Une fois la compilation du firmware terminée, votre sortie devrait ressembler à ça:
+
+```
+Linking: .build/ergodox_ez_xyverz.elf                                                               [OK]
+Creating load file for flashing: .build/ergodox_ez_xyverz.hex                                       [OK]
+Checking file size of ergodox_ez_xyverz.hex                                                         [OK]
+ * File size is fine - 25584/32256
+ Teensy Loader, Command Line, Version 2.1
+Read "./.build/ergodox_ez_xyverz.hex": 25584 bytes, 79.3% usage
+Waiting for Teensy device...
+ (hint: press the reset button)
+ ```
+
+Une fois terminé, réinitialisez votre board. Une fois fait, vous verrez une sortie comme ça:
+
+ ```
+ Found HalfKay Bootloader
+Read "./.build/ergodox_ez_xyverz.hex": 28532 bytes, 88.5% usage
+Programming............................................................................................................................................................................
+...................................................
+Booting
+```
+
+### STM32 (ARM)
+
+Pour la majorité des boards ARM (incluant les Proton C, Planck Rev 6, et Preonic Rev 3), lorsque vous êtes prêt à compiler et flasher votre firmware, ouvrez la fenêtre de terminal et lancez la commande de compilation:
+
+    make <my_keyboard>:<my_keymap>:dfu-util
+
+Par exemple, si votre keymap s'appelle "xyverz" et vous compilez une keymap pour le clavier Plank Revision 6, vous utiliserez cette commande et redémarrerez le clavier vers le bootloader (avant que la compilation soit terminée):
+
+    make planck/rev6:xyverz:dfu-util
+
+Une fois le firmware compilé, il va afficher quelque chose comme ça:
+
+```
+Linking: .build/planck_rev6_xyverz.elf                                                             [OK]
+Creating binary load file for flashing: .build/planck_rev6_xyverz.bin                               [OK]
+Creating load file for flashing: .build/planck_rev6_xyverz.hex                                     [OK]
+
+Size after:
+   text    data     bss     dec     hex filename
+      0   41820       0   41820    a35c .build/planck_rev6_xyverz.hex
+
+Copying planck_rev6_xyverz.bin to qmk_firmware folder                                              [OK]
+dfu-util 0.9
+
+Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
+Copyright 2010-2016 Tormod Volden and Stefan Schmidt
+This program is Free Software and has ABSOLUTELY NO WARRANTY
+Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
+
+Invalid DFU suffix signature
+A valid DFU suffix will be required in a future dfu-util release!!!
+Opening DFU capable USB device...
+ID 0483:df11
+Run-time device DFU version 011a
+Claiming USB DFU Interface...
+Setting Alternate Setting #0 ...
+Determining device status: state = dfuERROR, status = 10
+dfuERROR, clearing status
+Determining device status: state = dfuIDLE, status = 0
+dfuIDLE, continuing
+DFU mode device DFU version 011a
+Device returned transfer size 2048
+DfuSe interface name: "Internal Flash  "
+Downloading to address = 0x08000000, size = 41824
+Download        [=========================] 100%        41824 bytes
+Download done.
+File downloaded successfully
+Transitioning to dfuMANIFEST state
+```
+
+#### Commandes STM32
+
+Il y  aun certain nombre de commandes du DFU que vous pouvez utiliser pour flasher un firmware sur un device STM32:
+
+* `:dfu-util` - C'est l'option standard pour flasher un appareil STM32. Elle attendra qu'un bootloader STM32 soit présent et tentera de l’utiliser.
+* `:dfu-util-left` - Ceci flasher le firmware standard, comme la commande standard (`:dfu-util`). Toutefois, elle flasher aussi les fichiers EEPROM du "côté gauche" pour les claviers scindés.
+* `:dfu-util-right` - Ceci flash le firmware standard, comme la commande standard (`:dfu-util`). Toutefois, elle flash aussi les fichiers EEPROM du "côté droit" pour les claviers scindés.
+* `:st-link-cli` - Cela permet de flasher le firmware avec l'utilitaire en ligne de commande ST-LINK's plutôt que d'utiliser dfu-util.
+
+### BootloadHID
+
+Pour les claviers basés sur Bootmapper Client(BMC)/bootloadHID/ATmega32A, si vous êtes prêts à compiler et flasher le firmware, ouvrez votre fenêtre de terminal et lancez la commande suivante :
+
+    make <my_keyboard>:<my_keymap>:bootloaderHID
+
+Par exemple, si votre keymap s'appelle "xyverz" et que vous compilez une keymap pour un jj40, utilisez cette commande:
+
+    make jj40:xyverz:bootloaderHID
+
+Une fois le firmware compilé, vous aurez cette sortie:
+
+```
+Linking: .build/jj40_default.elf                                                                   [OK]
+Creating load file for flashing: .build/jj40_default.hex                                           [OK]
+Copying jj40_default.hex to qmk_firmware folder                                                    [OK]
+Checking file size of jj40_default.hex                                                             [OK]
+ * The firmware size is fine - 21920/28672 (6752 bytes free)
+```
+
+A ce stade, le script de build va chercher le bootloader DFU toutes les 5 secondes. Il répétera l ’affichage de ce message jusqu'à ce que l’appareil soit trouvé ou que vous annuliez l'opération```
+
+```
+Error opening HIDBoot device: The specified device was not found
+Trying again in 5s.
+```
+
+Une fois ce résultat obtenu, réinitialisez le contrôleur. Le résultat suivant devrait s’afficher :
+
+```
+Page size   = 128 (0x80)
+Device size = 32768 (0x8000); 30720 bytes remaining
+Uploading 22016 (0x5600) bytes starting at 0 (0x0)
+0x05580 ... 0x05600
+```
+
+## Faites l'essai!
+
+Bravo! Votre firmware customisé a été programmé sur votre clavier!
+
+Essayez-le et vérifiez qu'il fonctionne comme vous le souhaitez. Nous avons écrit [Tester et débugger](newbs_testing_debugging.md) pour compléter le guide du débutant, alors allez voir là-bas pour apprendre comment dépanner vos fonctionnalités custom.

docs/fr-FR/newbs_getting_started.md

@@ -0,0 +1,101 @@
+# Introduction
+
+Votre clavier d'ordinateur contient un processeur, proche de celui dans votre ordinateur. Ce processeur exécute un logiciel responsable de détecter les touches appuyées et envoie des rapports à propos de l'état du clavier lorsque les touches sont appuyées et relâchées. QMK prend le rôle de ce logiciel, détectant les appuis des boutons et passant cette information à l'ordinateur hôte. Lorsque vous construisez votre keymap customisée, vous créez l'équivalent d'un programme exécutable pour votre clavier.
+
+QMK essaie de rendre les choses simples faciles, et les choses difficiles possibles. Vous n'avez pas à savoir programmer pour créer des keymaps puissantes - vous devez seulement suivre quelques règles de syntaxe simples.
+
+# Guide de démarrage
+
+Avant de pouvoir construire des keymaps, vous devez installer quelques logiciels et configurer votre environnement de compilation. Ceci n'a besoin d'être fait seulement une fois, peu importe le nombre de clavier pour lesquels vous compter compiler un firmware.
+
+Si vous préférez une approche plus proche d'une interface graphique, considérez utiliser l'outil en ligne [QMK Configurator](https://config.qmk.fm). Référez-vous à [Construire votre premier firmware en utilisant l'interface graphique en ligne](newbs_building_firmware_configurator.md).
+
+## Logiciels à télécharger
+
+### Editeur de texte
+
+Vous allez avoir besoin d'un programme qui peut éditer et sauvegarder des fichiers **plain text**. Si vous êtes sur Windows, vous pouvez utiliser notepad et sur Linux vous pouvez utiliser gedit. Ces deux options sont des éditeurs de texte simples mais fonctionnels. Sur macOS, faites attention avec l'application par défaut TextEdit: elle ne sauvegardera pas les fichiers en mode "plain text" sauf si vous sélectionnez explicitement _Make Plain Text_ à partir du menu _Format_.
+
+Vous pouvez aussi télécharger et installer un éditeur de texte dédié comme [Sublime Text](https://www.sublimetext.com/) ou [VS Code](https://code.visualstudio.com/). C'est probablement la meilleure solution peu importe la plateforme car ce sont des programmes conçus spécifiquement pour éditer du code.
+
+?> Pas sûr de quel éditeur de texte utiliser? Laurence Bradford a écrit une [excellente introduction](https://learntocodewith.me/programming/basics/text-editors/) au sujet.
+
+### QMK Toolbox
+
+QMK Toolbox est un programme graphique optionnel pour Windows et macOS qui permet à la fois de programmer et débugger votre clavier customisé. Il vous sera probablement très utile pour facilement flasher votre clavier et analyser ses messages de débugage.
+
+[Télécharger la dernière version ici.](https://github.com/qmk/qmk_toolbox/releases/latest)
+
+* Pour Windows: `qmk_toolbox.exe` (portable) or `qmk_toolbox_install.exe` (installeur)
+* Pour macOS: `QMK.Toolbox.app.zip` (portable) or `QMK.Toolbox.pkg` (installeur)
+
+## Configurez votre environnement
+
+Nous avons essayé de rendre QMK aussi simple que possible à configurer. Vous avez uniquement à préparer votre environnment Linux ou Unix et laisser QMK installer le reste.
+
+?> Si vous n'avez jamais travaillé avec la ligne de commande Linux/Unix, il y a un certain nombre de concepts basiques et de commandes que vous devriez apprendre. Ces ressources vous apprendrons suffisemment pour travailler avec QMK:<br>
+[Commandes Linux à savoir](https://www.guru99.com/must-know-linux-commands.html)<br>
+[Commandes Unix de base](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
+
+### Windows
+
+Vous devez installer MSYS2 et Git.
+
+* Suivez les instructions d'installation sur la [page de MSYS2](http://www.msys2.org).
+* Fermez tous les terminaux MSYS2 éventuellement ouverts et ouvrez un nouveau terminal MSYS2 MinGW 64-bit.
+* Installez Git en lançant la commande: `pacman -S git`.
+
+### macOS
+
+Vous devez installer Homebew. Suivez les instructions sur la [page de Homebrew](https://brew.sh).
+
+Une fois Homebrew installé, continuez avec _Configurer QMK_. Dans cette étape, nous lancerons un script qui va installer d'autres paquets.
+
+### Linux
+
+Vous devez installer Git. Il est très probable que vous l'ayez déjà installé, mais sinon, une des commandes suivantes devrait l'installer:
+
+* Debian / Ubuntu / Devuan: `apt-get install git`
+* Fedora / Red Hat / CentOS: `yum install git`
+* Arch: `pacman -S git`
+
+?> Docker est aussi une option sur toutes les plateformes. [Appuyez ici pour plus de détail.](getting_started_build_tools.md#docker)
+
+## Configurer QMK
+
+Une fois votre environnement Linux/Unix configuré, vous êtes prêt à télécharger QMK. Nous allons le faire en utilisant Git pour "cloner" le dépôt de QMK. Ouvrez un terminal ou une fenêtre MSYS2 MinGW et gardez le ouvert pour le reste de ce guide. Dans ce terminal, lancez ces deux commandes:
+
+```shell
+git clone --recurse-submodules https://github.com/qmk/qmk_firmware.git
+cd qmk_firmware
+```
+
+?> Si vous savez déjà [comment utiliser GitHub](getting_started_github.md), nous recommandons que vous créez et clonez votre propre fork. Si vous ne savez pas ce que cela veut dire, vous pouvez sans problème ignorer ce message.
+
+QMK vient avec un script pour vous aider à configurer le reste de ce que vous aurez besoin. Vous devez le lancer en tapant la ligne de commande suivante:
+
+    util/qmk_install.sh
+
+## Testez votre environnement de compilation
+
+Maintenant que votre environnement de compilation de QMK est configuré, vous pouvez compiler un firmware pour votre clavier. Démarrez en compilant la keymap par défaut du clavier. Vous devriez pouvoir le faire avec une commande de ce format:
+
+    make <keyboard>:default
+
+Par exemple, pour compiler un firmware pour une Clueboard 66%, vous utiliserez:
+
+    make clueboard/66/rev3:default
+
+Une fois ceci fait, vous devriez avoir beaucoup d'information dans votre sortie qui devrait se terminer par quelque chose de similaire à ça:
+
+```
+Linking: .build/clueboard_66_rev3_default.elf                                                       [OK]
+Creating load file for flashing: .build/clueboard_66_rev3_default.hex                               [OK]
+Copying clueboard_66_rev3_default.hex to qmk_firmware folder                                        [OK]
+Checking file size of clueboard_66_rev3_default.hex                                                 [OK]
+ * The firmware size is fine - 26356/28672 (2316 bytes free)
+```
+
+# Créer votre Keymap
+
+Vous êtes maintenant prêt à créer votre propre keymap! Passez à l'étape [Compiler votre premier firmware](newbs_building_firmware.md) pour ce faire.

docs/fr-FR/newbs_learn_more_resources.md

@@ -0,0 +1,14 @@
+# Ressources d'apprentissage
+
+Ces ressources permettent de donner aux nouveaux membres de la communauté QMK plus de compréhension aux informations données dans la documentation Newbs.
+
+Ressources Git:
+
+* [Tutoriel général](https://www.codecademy.com/learn/learn-git)
+* [Jeu Git pour apprendre avec des exemples](https://learngitbranching.js.org/)
+* [Des ressources Git pour en savoir plus à propos de GitHub](getting_started_github.md)
+* [Des ressources Git spécifiques à QMK](contributing.md)
+
+Ressources sur les lignes de commande:
+
+* [Bon tutoriel général sur la ligne de commande](https://www.codecademy.com/learn/learn-the-command-line)

docs/fr-FR/newbs_testing_debugging.md

@@ -0,0 +1,102 @@
+# Test et débugage
+
+Une fois votre clavier configuré avec un firmware custom, vous êtes prêt à le tester. Avec un peu de chance, tout fonctionne parfaitement bien, dans le cas contraire, ce document vous aidera à trouver où se trouve le problème.
+
+## Tester
+
+Tester votre clavier est normalement assez simple. Appuyez chaque touche de votre clavier et assurez-vous qu'il envoie les touches auquel vous vous attendiez. Il existe même des programmes qui vous aideront à vérifier qu'aucune touche ne soit oubliée.
+
+Note: ces programmes ne sont ni fournis ni approuvés par QMK.
+
+* [QMK Configurator](https://config.qmk.fm/#/test/) (Web)
+* [Switch Hitter](https://web.archive.org/web/20190413233743/https://elitekeyboards.com/switchhitter.php) (Windows seulement)
+* [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (Mac seulement)
+* [Keyboard Tester](http://www.keyboardtester.com) (Web)
+* [Keyboard Checker](http://keyboardchecker.com) (Web)
+
+## Débuguer
+
+Votre clavier va envoyer des informations de débugage si vous avez `CONSOLE_ENABLE = yes` dans votre fichier `rules.mk`. Par défaut, la sortie est très limitée, mais vous pouvez activer le mode debug pour augmenter la quantité de sortie de débugage. Utilisez le keycode `DEBUG` dans votre keymap, utilisez la fonction [Commande](feature_command.md) pour activer le mode debug ou ajoutez le code suivant à votre keymap.
+
+```c
+void keyboard_post_init_user(void) {
+  // Customise these values to desired behaviour
+  debug_enable=true;
+  debug_matrix=true;
+  //debug_keyboard=true;
+  //debug_mouse=true;
+}
+```
+
+### Débuguer avec QMK Toolbox
+
+Pour les plateformes compatibles, [QMK Toolbox](https://github.com/qmk/qmk_toolbox) peut être utilisé pour afficher les messages de débugage pour votre clavier.
+
+### Débuguer avec hid_listen
+
+Vous préférez une solution basée sur le terminal? [hid_listen](https://www.pjrc.com/teensy/hid_listen.html), fourni par PJRC, peut aussi être utilisé pour afficher des messages de débugage. Des versions compilées pour Windows, Linux et MacOS sont disponibles.
+
+<!-- FIXME: Describe the debugging messages here. -->
+
+## Envoyer vos propres messages de débugage
+
+Parfois, il est utile d'afficher des messages de débugage depuis votre [code custom](custom_quantum_functions.md). Le faire est assez simple. Commencez par ajouter `print.h` au début de votre fichier:
+
+    #include <print.h>
+
+Une fois fait, vous pouvez utiliser les fonctions print suivantes:
+
+* `print("string")`: Affiche une simple chaîne de caractères.
+* `uprintf("%s string", var)`: Affiche une chaîne de caractères formatée.
+* `dprint("string")` Affiche une chaîne de caractère simple, mais uniquement lorsque le mode debug est activé.
+* `dprintf("%s string", var)`: Affiche une chaîne de caractère formatée, mais uniquement lorsque le mode debug est activé.
+
+## Exemples de debugage
+
+Si dessous se trouve une liste d'exemples réels de débugage. Pour plus d'information, référez-vous à [Débuguer/Dépanner QMK](faq_debug.md).
+
+### A quelle position de la matrice se trouve cette activation de touche?
+
+Lors du portage ou lorsque vous essayez de diagnostiquer un problème de PCB, il est utile de savoir si une activation de touche est enregistrée correctement. Pour activer le log de ce scénario, ajoutez le code suivant à votre fichier keymaps `keymap.c`.
+
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // If console is enabled, it will print the matrix position and status of each key pressed
+#ifdef CONSOLE_ENABLE
+    uprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+#endif
+  return true;
+}
+```
+
+Exemple de sortie
+
+```text
+Waiting for device:.......
+Listening:
+KL: kc: 169, col: 0, row: 0, pressed: 1
+KL: kc: 169, col: 0, row: 0, pressed: 0
+KL: kc: 174, col: 1, row: 0, pressed: 1
+KL: kc: 174, col: 1, row: 0, pressed: 0
+KL: kc: 172, col: 2, row: 0, pressed: 1
+KL: kc: 172, col: 2, row: 0, pressed: 0
+```
+
+### Combien de temps cela a pris pour une activation de touche?
+
+Lorsque vous testez des problèmes de performance, il peut être utile de savoir à quelle fréquence la matrice est scannée. Pour activer le log dans ce scénario, ajoutez la ligne suivante à votre fichier `config.h` de votre keymaps.
+
+```c
+#define DEBUG_MATRIX_SCAN_RATE
+```
+
+Exemple de sortie
+
+```text
+  > matrix scan frequency: 315
+  > matrix scan frequency: 313
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+```

docs/getting_started_build_tools.md

@@ -145,7 +145,7 @@ util/docker_build.sh
 There is also support for building _and_ flashing the keyboard straight from Docker by specifying the `target` as well:
 ```bash
 util/docker_build.sh keyboard:keymap:target
-# For example: util/docker_build.sh planck/rev6:default:dfu-util
+# For example: util/docker_build.sh planck/rev6:default:flash
 ```
 If you're on Linux, this should work out of the box. On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use [QMK Toolbox](https://github.com/qmk/qmk_toolbox) instead.
 

docs/getting_started_make_guide.md

@@ -14,8 +14,8 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
 * `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
-* `dfu`, `teensy`, `avrdude` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
- * **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck/rev4:default:dfu`.
+* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadHID` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
+ * **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck/rev4:default:flash`.
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.
 
 You can also add extra options at the end of the make command line, after the target
@@ -31,7 +31,7 @@ Here are some examples commands
 
 * `make all:all` builds everything (all keyboard folders, all keymaps). Running just `make` from the `root` will also run this.
 * `make ergodox_infinity:algernon:clean` will clean the build output of the Ergodox Infinity keyboard.
-* `make planck/rev4:default:dfu COLOR=false` builds and uploads the keymap without color output.
+* `make planck/rev4:default:flash COLOR=false` builds and uploads the keymap without color output.
 
 ## `rules.mk` Options
 
@@ -41,8 +41,6 @@ Set these variables to `no` to disable them, and `yes` to enable them.
 
 This allows you to hold a key and the salt key (space by default) and have access to a various EEPROM settings that persist over power loss. It's advised you keep this disabled, as the settings are often changed by accident, and produce confusing results that makes it difficult to debug. It's one of the more common problems encountered in help sessions.
 
-Consumes about 1000 bytes.
-
 `MOUSEKEY_ENABLE`
 
 This gives you control over cursor movements and clicks via keycodes/custom functions.
@@ -67,8 +65,6 @@ To see the text, open `hid_listen` and enjoy looking at your printed messages.
 
 **NOTE:** Do not include *uprint* messages in anything other than your keymap code. It must not be used within the QMK system framework. Otherwise, you will bloat other people's .hex files.
 
-Consumes about 400 bytes.
-
 `COMMAND_ENABLE`
 
 This enables magic commands, typically fired with the default magic key combo `LSHIFT+RSHIFT+KEY`. Magic commands include turning on debugging messages (`MAGIC+D`) or temporarily toggling NKRO (`MAGIC+N`).
@@ -83,7 +79,7 @@ This allows the keyboard to tell the host OS that up to 248 keys are held down a
 
 `BACKLIGHT_ENABLE`
 
-This enables your backlight on Timer1 and ports B5, B6, or B7 (for now). You can specify your port by putting this in your `config.h`:
+This enables the in-switch LED backlighting. You can specify the backlight pin by putting this in your `config.h`:
 
     #define BACKLIGHT_PIN B7
 
@@ -125,11 +121,9 @@ Use this to debug changes to variable values, see the [tracing variables](unit_t
 
 This enables using the Quantum SYSEX API to send strings (somewhere?)
 
-This consumes about 5390 bytes.
-
 `KEY_LOCK_ENABLE`
 
-This enables [key lock](feature_key_lock.md). This consumes an additional 260 bytes.
+This enables [key lock](feature_key_lock.md).
 
 `SPLIT_KEYBOARD`
 

docs/hand_wire.md

@@ -1,19 +1,18 @@
-# Quantum Hand-Wiring Guide
+# Hand-Wiring Guide
 
-Parts list:
-* *x* keyswitches (MX, Matias, Gateron, etc)
-* *x* diodes
-* Keyboard plate (metal, plastic, cardboard, etc)
-* Wire (strained for wiring to the Teensy, anything for the rows/columns)
-* Soldering iron set at 600ºF or 315ºC (if temperature-controlled)
-* Rosin-cored solder (leaded or lead-free)
-* Adequate ventilation/a fan
-* Tweezers (optional)
-* Wire cutters/snippers
+## Preamble: How a Keyboard Matrix Works (and why we need diodes)
 
-## How the Matrix Works (Why We Need Diodes)
+The collapsible section below covers why keyboards are wired the way they are, as outlined in this guide.  It isn't required reading to make your own hand wired keyboard, but provides background information.
 
-The microcontroller (in this case, the Teensy 2.0) will be setup up via the firmware to send a logical 1 to the columns, one at a time, and read from the rows, all at once - this process is called matrix scanning. The matrix is a bunch of open switches that, by default, don't allow any current to pass through - the firmware will read this as no keys being pressed. As soon as you press one key down, the logical 1 that was coming from the column the keyswitch is attached to gets passed through the switch and to the corresponding row - check out the following 2x2 example:
+<details>
+
+<summary>Click for details</summary>
+
+Without a matrix circuit each switch would require its own wire directly to the controller.
+
+Simply put, when the circuit is arranged in rows and columns, if a key is pressed, a column wire makes contact with a row wire and completes a circuit. The keyboard controller detects this closed circuit and registers it as a key press.
+
+The microcontroller will be setup up via the firmware to send a logical 1 to the columns, one at a time, and read from the rows, all at once - this process is called matrix scanning. The matrix is a bunch of open switches that, by default, don't allow any current to pass through - the firmware will read this as no keys being pressed. As soon as you press one key down, the logical 1 that was coming from the column the keyswitch is attached to gets passed through the switch and to the corresponding row - check out the following 2x2 example:
 
         Column 0 being scanned     Column 1 being scanned
                   x                                   x
@@ -100,30 +99,132 @@ Things act as they should! Which will get us the following data:
 
 The firmware can then use this correct data to detect what it should do, and eventually, what signals it needs to send to the OS.
 
-# The Actual Hand-Wiring
+Further reading:
+- [Wikipedia article](https://en.wikipedia.org/wiki/Keyboard_matrix_circuit)
+- [Deskthority article](https://deskthority.net/wiki/Keyboard_matrix)
+- [Keyboard Matrix Help by Dave Dribin (2000)](https://www.dribin.org/dave/keyboard/one_html/)
+- [How Key Matrices Works by PCBheaven](http://pcbheaven.com/wikipages/How_Key_Matrices_Works/) (animated examples)
+- [How keyboards work - QMK documentation](how_keyboards_work.md)
 
-## Getting Things in Place
+</details>
 
-When starting this, you should have all of your stabilisers and keyswitches already installed (and optionally keycaps). If you're using a Cherry-type stabiliser (plate-mounted only, obviously), you'll need to install that before your keyswitches. If you're using Costar ones, you can installed them afterwards.
 
-To make things easier on yourself, make sure all of the keyswitches are oriented the same way (if they can be - not all layouts support this). Despite this, it's important to remember that the contacts on the keyswitches are completely symmetrical. We'll be using the keyswitch's left side contact for wiring the rows, and the right side one for wiring the columns.
+## Parts list
 
-Get your soldering iron heated-up and collect the rest of the materials from the part list at the beginning of the guide. Place your keyboard so that the bottoms of the keyswitches are accessible - it may be a good idea to place it on a cloth to protect your keyswitches/keycaps.
+You will need: (where *x* is the number of keys on your planned keyboard)
 
-Before continuing, plan out where you're going to place your Teensy. If you're working with a board that has a large (6.25u) spacebar, it may be a good idea to place it in-between switches against the plate. Otherwise, you may want to trim some of the leads on the keyswitches where you plan on putting it - this will make it a little harder to solder the wire/diodes, but give you more room to place the Teensy.
+* QMK compatible microcontroller board (Teensy, Pro-Micro, QMK Proton C etc.)
+* *x* keyswitches (MX, Matias, Gateron, etc)
+* *x* through hole diodes
+* Keyboard plate and plate mount stabilisers
+* Wire
+* Soldering iron
+* Rosin-cored solder
+* Adequate ventilation/a fan
+* Wire cutters/snippers
 
-## Preparing the Diodes
+Optional but useful:
 
-It's a little easier to solder the diodes in place if you bend them at a 90º angle immediately after the black line - this will help to make sure you put them on the right way (direction matters), and in the correct position. The diodes will look like this when bent (with longer leads):
+* Wire strippers/a sharp knife
+* Tweezers and/or small needle nose pliers
+* Soldering station/Helping hands
 
-```
-       ┌─────┬─┐
-    ───┤     │ ├─┐
-       └─────┴─┘ │
-                 │
-```
+## Starting the build
 
-We'll be using the long lead at the bent end to connect it to the elbow (bent part) of the next diode, creating the row.
+There are many ways to hand wire a PCB matrix, this guide will describe the fundamentals as well as some recommended ways to go about it.
+
+As we are dealing with hand wiring, it is assumed that you already have a plate.  If you are planning a completely custom layout, tools such as [ai03 Plate Generator](https://kbplate.ai03.me/) and [Swillkb Plate & Case Builder](http://builder.swillkb.com/) can help when designing one.
+
+Start by installing the switches and stabilisers in the plate. Depending on the thickness and material this may also involve hot gluing it in place.
+
+## Planning the matrix
+
+If you are following a pre-existing handwire guide (e.g. for the keyboards in the [handwire firmware section](https://github.com/qmk/qmk_firmware/tree/master/keyboards/handwired) you can skip this step, just ensure you wire the matrix as described.
+
+What you want to achieve is one leg from each switch being attached to the corresponding switches next to it (rows) and the other leg being attached to the switches above and below it (columns) and a diode to one of the legs, mosy commonly this will be the leg attached to the rows, and the diode will face away from it (Column to Row) i.e. with the wire furthest from the black line on the diode connected to the switch (as current will only travel in one direction through a diode)
+
+It is fairly simple to plan for an ortholinear keyboard (like a Planck).
+
+![Example planck matrix](https://i.imgur.com/FRShcLD.png)
+Image from [RoastPotatoes' "How to hand wire a Planck"](https://blog.roastpotatoes.co/guide/2015/11/04/how-to-handwire-a-planck/)
+
+But the larger and more complicated your keyboard, the more complex the matrix.  [Keyboard Firmware Builder](https://kbfirmware.com/) can help you plan your matrix layout (shown here with a basic fullsize ISO keyboard imported from [Keyboard Layout Editor](http://www.keyboard-layout-editor.com).
+
+![Example ISO matrix](https://i.imgur.com/UlJ4ZDP.png)
+
+ Bear in mind that the number of rows plus the number of columns can not exceed the number of I/O pins on your controller.  So the fullsize matrix shown above would be possible on a Proton C or Teensy++, but not on a regular Teensy or Pro Micro
+
+#### Common Microcontroller Boards
+
+| Board         | Controller    | # I/O  | Pinout |
+| :------------ |:-------------:| ------:| ------ |
+| Pro Micro*     | ATmega32u4    |     20 | [link](https://learn.sparkfun.com/tutorials/pro-micro--fio-v3-hookup-guide/hardware-overview-pro-micro#Teensy++_2.0)       |
+| Teensy 2.0    | ATmega32u4    |     25 | [link](https://www.pjrc.com/teensy/pinout.html)       |
+| [QMK Proton C](https://qmk.fm/proton-c/)      | STM32F303xC   |     36 | [link 1](https://i.imgur.com/RhtrAlc.png), [2](https://deskthority.net/wiki/QMK_Proton_C)       |
+| Teensy++ 2.0  | AT90USB1286   |     46 | [link](https://www.pjrc.com/teensy/pinout.html#Teensy_2.0)       |
+
+*Elite C is essentially the same as a pro micro with a USB-C instead of Micro-USB
+
+There are also a number of boards designed specifically for handwiring that mount directly to a small number of switches and offer pinouts for the rest.  Though these are generally more expensive and may be more difficult to get hold of.
+
+<img src="https://i.imgur.com/QiA3ta6.jpg" alt="Postage board mini mounted in place" width="500"/>
+
+| Board         | Controller    | # I/O  |
+| :------------ |:-------------:| ------:|
+| [Swiss helper](https://www.reddit.com/r/MechanicalKeyboards/comments/8jg5d6/hand_wiring_this_might_help/) |  ATmega32u4 | 20 |
+| [Postage board](https://github.com/LifeIsOnTheWire/Postage-Board/)| ATmega32u4| 25 |
+| [Postage board mini](https://geekhack.org/index.php?topic=101460.0)| ATmega32u4| 25 |
+
+## Wiring the matrix
+
+There is no one right way to do this.  What you want to achieve is good connection at all of the joints planned and no unintentional shorts.
+
+Established materials and techniques include:
+
+| Technique     | Examples | Pros | Cons | Image
+| :-----------| :------- | :------ | :--- | :---
+| Lengths of wire with stripped segments | [Sasha Solomon's Dactyl](https://medium.com/@sachee/building-my-first-keyboard-and-you-can-too-512c0f8a4c5f) and [Cribbit's modern hand wire](https://geekhack.org/index.php?topic=87689.0) | Neat and tidy | Some effort in stripping the wire | ![Stripped wire](https://i.imgur.com/0GNIYY0.jpg)
+| Short lengths of wire | [u/xicolinguada's ortho build](https://www.reddit.com/r/MechanicalKeyboards/comments/c39k4f/my_first_hand_wired_keyboard_its_not_perfect_but/) | Easier to strip the wire | More difficult to place | ![individual wire lengths](https://i.imgur.com/mBe5vkL.jpg)
+| Magnet/Enamelled wire | [Brett Kosinski's handwired alpha](http://blog.b-ark.ca/Blog-2019-01-27) and [fknraiden's custom board](https://geekhack.org/index.php?topic=74223.0) | Can be directly soldered onto (insulation burns off with heat) | Appearance? | ![Magnet wire](https://i.imgur.com/b4b7KDb.jpg)
+| Bending the legs of the diodes for the rows | [Matt3o's Brownfox](https://deskthority.net/viewtopic.php?f=7&t=6050) | Fewer solder joints required | Uninsulated | ![Bent diode legs](https://i.imgur.com/aTnG8TV.jpg)
+| Using ridid wiring (e.g. brass tube) | [u/d_stilgar's invisible hardline](https://www.reddit.com/r/MechanicalKeyboards/comments/8aw5j2/invisible_hardline_keyboard_progress_update_april/) and [u/jonasfasler's first attempt](https://www.reddit.com/r/MechanicalKeyboards/comments/de1jyv/my_first_attempt_at_handwiring_a_keyboard/) | Very pretty | More difficult. No physical insulation | ![Hardline hand wire](https://i.imgur.com/CnASmPo.jpg)
+| Bare wire with insulation added after (e.g. kapton tape) | [Matt3o's 65% on his website](https://matt3o.com/hand-wiring-a-custom-keyboard/) | Easier (no wire stripping required) | Not as attractive | ![Bare wire](https://i.imgur.com/AvXZShD.jpg)
+| Copper tape | [ManuForm Dactyl](https://github.com/tshort/dactyl-keyboard) | Very easy | Only really works when your plate/case aligns with the bottom of your switches | ![Copper tape](https://i.imgur.com/RFyNMlL.jpg)
+
+
+Note that these methods can be combined.  Prepare your lengths of wire before moving on to soldering.
+
+
+### A note on split keyboards
+
+If you are planning a split keyboard (e.g. Dactyl) each half will require a controller and a means of communicating between them (like a TRRS or hardwired cable).  Further information can be found in the [QMK split keyboard documentation.](feature_split_keyboard.md)
+
+
+### Soldering
+
+There are a lot of soldering guides and tips available elsewhere but here are some of the most useful and relevant for hand wiring:
+
+To ensure a strong solder joint you want a good amount of contact between the solder and the 2 peices of metal you are connecting, a good way of doing this (though not required) is looping around pins or twisting wires together before applying solder.
+
+<img src="https://i.imgur.com/eHJjmnU.jpg" alt="Looped around rod" width="200"/> <img src="https://i.imgur.com/8nbxmmr.jpg?1" alt="Looped diode leg" width="200"/>
+
+If your diodes are on a packaging strip and need a bend in them (either the start of a loop or for connecting to its neighbour) this can easily done by bending it over something straight like the edge of a box, table, or ruler.  This also helps keep track of the direction of the diode as all the bends will be on the same side.
+
+<img src="https://i.imgur.com/oITudbX.jpg" alt="Bent diode legs" width="200"/>
+
+If your iron has temperature control, set it to 315ºC (600ºF).
+
+Once heated, tin your soldering iron - this means melting a small amount of solder on the end of the iron and then quickly wiping it off on a wet sponge or wire cleaning pad, leaving a shiny silvery coating on the end which helps keep oxidisation at bay and helps solder to flow.
+
+When you come to apply the solder, hold the soldering iron against the two surfaces for a second to heat it, then apply a small amount of solder to join the two pieces together.  Heating the surfaces ensures that the solder adheres to it and that it does not cool too quickly.
+
+Don't hold the iron on the solder/joint longer than necessary. Heat will be conducted through the surfaces and can damage components (melt switch housings etc.).  Also, solder contains flux, which aids in ["wetting"](https://en.m.wikipedia.org/wiki/Wetting).  The longer heat is applied to the solder the more flux will evaporate meaning you may end up with a bad solder joint with peaks which, apart from looking bad, may also increase the risk of electrical shorts.
+
+The following collapsible section describes in detail how to solder rows using the bent diode technique and columns using short lengths of wire.
+
+<details>
+
+<summary>Click for details</summary>
 
 ## Soldering the Diodes
 
@@ -169,34 +270,52 @@ Before beginning to solder, it helps to have your wire pre-bent (if using single
 
 If you're not using any insulation, you can try to keep the column wires elevated, and solder them near the tips of the keyswitch contacts - if the wires are sturdy enough, they won't short out to the row wiring an diodes.
 
-## Wiring Things to the Teensy
+</details>
 
-Now that the matrix itself is complete, it's time to connect what you've done to the Teensy. You'll be needing the number of pins equal to your number of columns + your number of rows. There are some pins on the Teensy that are special, like D6 (the LED on the chip), or some of the UART, SPI, I2C, or PWM channels, but only avoid those if you're planning something in addition to a keyboard. If you're unsure about wanting to add something later, you should have enough pins in total to avoid a couple.
+# Wiring up the controller
 
-The pins you'll absolutely have to avoid are: GND, VCC, AREF, and RST - all the others are usable and accessible in the firmware.
+Now that the matrix itself is complete, it's time to connect what you've done to the microcontroller board.
 
-Place the Teensy where you plan to put it - you'll have to cut wires to length in the next step, and you'll want to make sure they reach.
+Place the microcontroller where you want it to be located, give thought to mounting and case alignment.  Bear in mind that the location of the USB socket can be different from the controller by using a short male to female cable if required,.
 
-Starting with the first column on the right side, measure out how much wire you'll need to connect it to the first pin on the Teensy - it helps to pick a side that you'll be able to work down, to keep the wires from overlapping too much. It may help to leave a little bit of slack so things aren't too tight. Cut the piece of wire, and solder it to the Teensy, and then the column - you can solder it anywhere along the column, but it may be easiest at the keyswitch. Just be sure the wire doesn't separate from the keyswitch when soldering.
+Find the pinout/documentation for your microcontroller board ([links here](#common-microcontroller-boards)) and make a note of all the digital I/O pins on it (note that on some controllers, like the teensy, analogue I/O can double as digital) as these are the pins you want to connect your wires to.
 
-As you move from column to column, it'll be helpful to write the locations of the pins down. We'll use this data to setup the matrix in the future.
+<details>
 
-When you're done with the columns, start with the rows in the same process, from top to bottom, and write them all down. Again, you can solder anywhere along the row, as long as it's after the diode - soldering before the diode (on the keyswitch side) will cause that row not to work.
+<summary>Specific instructions for the Teensy 2.0</summary>
 
-As you move along, be sure that the Teensy is staying in place - recutting and soldering the wires is a pain!
+ There are some pins on the Teensy that are special, like D6 (the LED on the chip), or some of the UART, SPI, I2C, or PWM channels, but only avoid those if you're planning something in addition to a keyboard. If you're unsure about wanting to add something later, you should have enough pins in total to avoid a couple.
 
-## Additional guides
+The pins you'll absolutely have to avoid, as with any controller, are: GND, VCC, AREF, and RST - all the others are usable and accessible in the firmware.
+
+</details>
+
+Cut wires to the length of the distance from the a point on each column/row to the controller.  You can solder anywhere along the row, as long as it's after the diode - soldering before the diode (on the keyswitch side) will cause that row not to work.
+
+Ribbon cable can be used to keep this extra tidy.  You may also want to consider routing the wires beneath the exisiting columns/rows.
+
+<img src="https://i.imgur.com/z2QlKfB.jpg" alt="Ribbon Cable" width="350"/>
+
+As you solder the wires to the controller make a note of which row/column is going to which pin on the controller as we'll use this data to setup the matrix when we create the firmware.
+
+As you move along, be sure that the controller is staying in place - recutting and soldering the wires is a pain!
 
-If you're more of a visual learner, or want some additional tips and something more to follow along, these two visual step by step guides may be helpful:
 
-- [BrownFox's step by step guide](https://deskthority.net/viewtopic.php?f=7&t=6050)
-- [Cribbit's modern hand wiring guide](https://geekhack.org/index.php?topic=87689.0)
 
 # Getting Some Basic Firmware Set Up
 
-From here, you should have a working keyboard once you program a firmware. Before we attach the Teensy permanently to the keyboard, let's quickly get some firmware loaded onto the Teensy so we can test each keyswitch.
+From here, you should have a working keyboard once you program a firmware.
 
-To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/) (paid) or [Visual Studio Code](https://code.visualstudio.com) (free).
+Simple firmware can be created easily using the [Keyboard Firmware Builder](https://kbfirmware.com/) website.  Recreate your layout using [Keyboard Layout Editor](http://www.keyboard-layout-editor.com), import it and recreate the matrix (if not already done as part of [planning the matrix](#planning-the-matrix).
+
+Go through the rest of the tabs, assigning keys until you get to the last one where you can compile and download your firmware.  The .hex file can be flashed straight onto your keyboard, and the .zip of source files can be modified for advanced functionality and compiled locally using the method described in the collapsable section below, or using the more comprehensive [getting started guide.](newbs_getting_started)
+
+
+<details>
+
+<summary>Creating and compiling your firmware locally (command line method)</summary>
+
+To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/) (paid) or [Visual Studio Code](https://code.visualstudio.com) (free).
 
 The first thing we're going to do is create a new keyboard. In your terminal, run this command, which will ask you some questions and generate a basic keyboard project:
 
@@ -319,9 +438,22 @@ Once everything is installed, running `make` in the terminal should get you some
 
 Once you have your `<project_name>.hex` file, open up the Teensy loader application, and click the file icon. From here, navigate to your `QMK/keyboards/<project_name>/` folder, and select the `<project_name>.hex` file. Plug in your keyboard and press the button on the Teensy - you should see the LED on the device turn off once you do. The Teensy Loader app will change a little, and the buttons should be clickable - click the download button (down arrow), and then the reset button (right arrow), and your keyboard should be ready to go!
 
+</details>
+
+## Flashing the Firmware
+
+Install [QMK toolbox](https://github.com/qmk/qmk_toolbox).
+
+![QMK Toolbox](https://i.imgur.com/86Cz30H.png)
+
+Under "Local File" navigate to your newly created .hex file.  Under "Microcontroller", select the corresponding one for your controller board (common ones available [here](#common-microcontroller-boards)).
+
+Plug in your keyboard and press the reset button (or short the Reset and Ground pins if there is no button) and click the "Flash" button in QMK toolbox.
+
+
 ## Testing Your Firmware
 
-Carefully flip your keyboard over, open up a new text document, and try typing - you should get the characters that you put into your keymap. Test each key, and note the ones that aren't working. Here's a quick trouble-shooting guide for non-working keys:
+Use a website such as [keyboard tester](https://www.keyboardtester.com/tester.html)/[keyboard checker](http://keyboardchecker.com/) or just open a text editor and try typing - you should get the characters that you put into your keymap. Test each key, and make a note of the ones that aren't working. Here's a quick trouble-shooting guide for non-working keys:
 
 0. Flip the keyboard back over and short the keyswitch's contacts with a piece wire - this will eliminate the possibility of the keyswitch being bad and needing to be replaced.
 1. Check the solder points on the keyswitch - these need to be plump and whole. If you touch it with a moderate amount of force and it comes apart, it's not strong enough.
@@ -330,11 +462,25 @@ Carefully flip your keyboard over, open up a new text document, and try typing -
 4. Check the solder joints on both sides of the wires going to/from the Teensy - the wires need to be fully soldered and connect to both sides.
 5. Check the `<project_name>.h` file for errors and incorrectly placed `KC_NO`s - if you're unsure where they should be, instead duplicate a k*xy* variable.
 6. Check to make sure you actually compiled the firmware and flashed the Teensy correctly. Unless you got error messages in the terminal, or a pop-up during flashing, you probably did everything correctly.
+7. Use a multimeter to check that the switch is actually closing when actuated (completing the circuit when pressed down).
 
 If you've done all of these things, keep in mind that sometimes you might have had multiple things affecting the keyswitch, so it doesn't hurt to test the keyswitch by shorting it out at the end.
 
-# Securing the Teensy, Finishing Your Hardware, Getting Fancier Firmware
+# Finishing up
+
+Once you have confirmed that the keyboard is working, if you have used a seperate (non handwire specific) controller you will want to secure it in place.  This can be done in many different ways e.g. hot glue, double sided sticky tape, 3D printed caddy, electrical tape.
+
+If you found this fullfilling you could experiment by adding additional features such as [in switch LEDs](https://geekhack.org/index.php?topic=94258.0), [in switch RGB](https://www.reddit.com/r/MechanicalKeyboards/comments/5s1l5u/photoskeyboard_science_i_made_a_handwired_rgb/), [RGB underglow](https://medium.com/@DavidNZ/hand-wired-custom-keyboard-cdd14429c7b3#.7a1ovebsk) or even an [OLED display!](https://www.reddit.com/r/olkb/comments/5zy7og/adding_ssd1306_oled_display_to_your_build/) 
+
+There are a lot of possibilities inside the firmware - explore [docs.qmk.fm](http://docs.qmk.fm) for a full feature list, and dive into the different keyboards to see how people use all of them. You can always stop by [the OLKB subreddit](http://reddit.com/r/olkb) or [QMK Discord](https://discord.gg/Uq7gcHh) for help!
+
+# Links to other guides:
+
+- [matt3o's step by step guide (BrownFox build)](https://deskthority.net/viewtopic.php?f=7&t=6050) also his [website](https://matt3o.com/hand-wiring-a-custom-keyboard/) and [video guide](https://www.youtube.com/watch?v=LVzpsjFWPP4)
+- [Cribbit's "Modern hand wiring guide - stronger, cleaner, easier"](https://geekhack.org/index.php?topic=87689.0) 
+- [Sasha Solomon's "Building my first Keyboard"](https://medium.com/@sachee/building-my-first-keyboard-and-you-can-too-512c0f8a4c5f)
+- [RoastPotatoes' "How to hand wire a Planck"](https://blog.roastpotatoes.co/guide/2015/11/04/how-to-handwire-a-planck/)
+- [Masterzen's "Handwired keyboard build log"](http://www.masterzen.fr/2018/12/16/handwired-keyboard-build-log-part-1/)
+
 
-Now that you have a working board, it's time to get things in their permanent positions. I've often used liberal amounts of hot glue to secure and insulate things, so if that's your style, start spreading that stuff like butter. Otherwise, double-sided tape is always an elegant solution, and electrical tape is a distant second. Due to the nature of these builds, a lot of this part is up to you and how you planned (or didn't plan) things out.
 
-There are a lot of possibilities inside the firmware - explore [docs.qmk.fm](http://docs.qmk.fm) for a full feature list, and dive into the different keyboards (Planck, Clueboard, Ergodox EZ, etc) to see how people use all of them. You can always stop by [the OLKB subreddit for help!](http://reddit.com/r/olkb)

docs/hardware_avr.md

@@ -1,6 +1,6 @@
 # Keyboards with AVR Processors
 
-This page describes the support for for AVR processors in QMK. AVR processors include the atmega32u4, atmega32u2, at90usb1286, and other processors from Atmel Corporation. AVR processors are 8-bit MCU's that are designed to be easy to work with. The most common AVR processors in keyboards have on-board USB and plenty of GPIO for supporting large keyboard matrices. They are the most popular MCU for use in keyboards today.
+This page describes the support for for AVR processors in QMK. AVR processors include the atmega32u4, atmega32u2, at90usb1286, and other processors from Atmel Corporation. AVR processors are 8-bit MCUs that are designed to be easy to work with. The most common AVR processors in keyboards have on-board USB and plenty of GPIO for supporting large keyboard matrices. They are the most popular MCU for use in keyboards today.
 
 If you have not yet you should read the [Keyboard Guidelines](hardware_keyboard_guidelines.md) to get a sense of how keyboards fit into QMK.
 
@@ -78,7 +78,7 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
 #define DESCRIPTION     A custom keyboard
 ```
 
-?> Note: On Windows and macOS the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` fields will be displayed in the list of USB devices. ?> On Linux these values will not be visible in lsusb by default, since Linux takes the information from the list maintained by [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. lsusb will show the information reported by the device when executed with -v option. It is also present in kernel logs after plugging in the device.
+?> Windows and macOS will display the `MANUFACTURER` and `PRODUCT` in the list of USB devices. `lsusb` on Linux instead takes these from the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. `lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.
 
 ### Keyboard Matrix Configuration
 
@@ -125,7 +125,7 @@ To configure a keyboard where each switch is connected to a separate pin and gro
 
 ### Backlight Configuration
 
-By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md).
+QMK supports backlighting on most GPIO pins. A select few of these can be driven by the MCU in hardware. For more details see the [Backlight Documentation](feature_backlight.md).
 
 ```c
 #define BACKLIGHT_PIN B7
@@ -134,8 +134,6 @@ By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are us
 #define BREATHING_PERIOD 6
 ```
 
-?> You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
-
 ### Other Configuration Options
 
 There are a lot of features that can be configured or tuned in `config.h`. You should see the [Config Options](config_options.md) page for more details.

docs/hardware_drivers.md

@@ -20,7 +20,7 @@ Support for SSD1306 based OLED displays. For more information see the [OLED Driv
 
 ## uGFX
 
-You can make use of uGFX within QMK to drive character and graphic LCD's, LED arrays, OLED, TFT, and other display technologies. This needs to be better documented, if you are trying to do this and reading the code doesn't help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) and we can help you through the process.
+You can make use of uGFX within QMK to drive character and graphic LCDs, LED arrays, OLED, TFT, and other display technologies. This needs to be better documented, if you are trying to do this and reading the code doesn't help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) and we can help you through the process.
 
 ## WS2812 (AVR Only)
 

docs/hardware_keyboard_guidelines.md

@@ -67,7 +67,7 @@ The presence of this file means that the folder is a keyboard target and can be
 
 ### `<keyboard_name.c>`
 
-This is where you will write custom code for your keyboard. Typically you will write code to initialize and interface with the hardware in your keyboard. If your keyboard consists of only a key matrix with no LEDs, speakers, or other auxillary hardware this file can be blank.
+This is where you will write custom code for your keyboard. Typically you will write code to initialize and interface with the hardware in your keyboard. If your keyboard consists of only a key matrix with no LEDs, speakers, or other auxiliary hardware this file can be blank.
 
 The following functions are typically defined in this file:
 

docs/how_keyboards_work.md

@@ -33,7 +33,11 @@ The firmware does not send actual letters or characters, but only scancodes.
 Thus, by modifying the firmware, you can only modify what scancode is sent over
 USB for a given key.
 
-## 3. What the Operating System Does
+## 3. What the Event Input/Kernel Does
+
+The *scancode* is mapped to a *keycode* dependent on the keyboard [60-keyboard.hwdb at Master](https://github.com/systemd/systemd/blob/master/hwdb.d/60-keyboard.hwdb). Without this mapping, the operating system will not receive a valid keycode and will be unable to do anything useful with that key press.
+
+## 4. What the Operating System Does
 
 Once the keycode reaches the operating system, a piece of software has to have
 it match an actual character thanks to a keyboard layout. For example, if your

docs/i2c_driver.md

@@ -7,7 +7,7 @@ The I2C Master drivers used in QMK have a set of common functions to allow porta
 |Function                                                                                                          |Description                                                                                                                                                                  |
 |------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
 |`void i2c_init(void);`                                                                                            |Initializes the I2C driver. This function should be called once before any transaction is initiated.                                                                         |
-|`uint8_t i2c_start(uint8_t address);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
+|`uint8_t i2c_start(uint8_t address, uint16_t timeout);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
 |`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
 |`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
 |`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
@@ -34,7 +34,6 @@ The following defines can be used to configure the I2C master driver.
 |Variable          |Description                                        |Default|
 |------------------|---------------------------------------------------|-------|
 |`F_SCL`           |Clock frequency in Hz                              |400KHz |
-|`Prescaler`       |Divides master clock to aid in I2C clock selection |1      |
 
 AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required.
 

docs/index.html

@@ -3,12 +3,13 @@
 <head>
   <meta charset="UTF-8">
   <title>QMK Firmware</title>
+  <link rel="icon" type="image/png" href="gitbook/images/favicon.png">
   <meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1" />
   <meta name="description" content="Description">
   <meta name="viewport" content="width=device-width, user-scalable=no, initial-scale=1.0, maximum-scale=1.0, minimum-scale=1.0">  
   <meta property="og:title" content="QMK Firmware Docs">
   <meta property="og:type" content="website">
-  <meta property="og:description" content="The full documenation of the open-source firmware">
+  <meta property="og:description" content="The full documentation of the open-source firmware">
   <meta property="og:image" content="https://i.imgur.com/svjvIrw.jpg">
   <meta property="og:url" content="https://docs.qmk.fm">
   <meta name="twitter:card" content="summary_large_image">
@@ -20,19 +21,50 @@
   <div id="app"></div>
   <script>
     window.$docsify = {
+      alias : {
+        '/en/(.*)': '/$1',
+        '/en-us/(.*)': '/$1',
+        '/en-gb/(.*)': '/$1',
+        '/.*/_langs.md': '/_langs.md',
+      },
+      basePath: '/',
       name: 'QMK Firmware',
-      nameLink: 'https://qmk.fm/',
+      nameLink: '/',
       repo: 'qmk/qmk_firmware',
       loadSidebar: '_summary.md',
+      loadNavbar: '_langs.md',
+      mergeNavbar: true,
       auto2top: true,
       formatUpdated: '{YYYY}/{MM}/{DD} {HH}:{mm}',
       search: {
         paths: 'auto',
-        placeholder: 'Search Documentation...',
-        noData: 'We could not find any documents matching your search.',
+        placeholder: {
+          '/zh-cn/': '搜索',
+          '/': 'Search'
+        },
+        noData: {
+          '/zh-cn/': '没有结果!',
+          '/': 'No results!'
+        },
         depth: 6
       },
-      fallbackLanguages: ['zh']
+      plugins: [
+        function (hook, vm) {
+          hook.beforeEach(function (html) {
+            if (/githubusercontent\.com/.test(vm.route.file)) {
+              url = vm.route.file
+                .replace('raw.githubusercontent.com', 'github.com')
+                .replace(/\/master/, '/blob/master')
+            } else {
+              url = 'https://github.com/qmk/qmk_firmware/blob/master/docs/' + vm.route.file
+            }
+            var editHtml = '[:memo: Edit Document](' + url + ')\n'
+            return html
+              + '\n\n----\n\n'
+              + editHtml
+          })
+        },
+      ]
     }
   </script>
   <script src="//unpkg.com/docsify/lib/docsify.min.js"></script>

docs/internals_gpio_control.md

@@ -6,18 +6,17 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This
 
 The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`.
 
-|Function              |Description                                                       |
-|----------------------|------------------------------------------------------------------|
-|`setPinInput(pin)`    |Set pin as input with high impedance (High-Z)                     |
-|`setPinInputHigh(pin)`|Set pin as input with build in pull-up                            |
-|`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)|
-|`setPinOutput(pin)`   |Set pin as output                                                 |
-|`writePinHigh(pin)`   |Set pin level as high, assuming it is an output                   |
-|`writePinLow(pin)`    |Set pin level as low, assuming it is an output                    |
-|`writePin(pin, level)`|Set pin level, assuming it is an output                           |
-|`readPin(pin)`        |Returns the level of the pin                                      |
+|Function              |Description                                                       | Old AVR Examples                               | Old ChibiOS/ARM Examples                        |
+|----------------------|------------------------------------------------------------------|------------------------------------------------|-------------------------------------------------|
+|`setPinInput(pin)`    |Set pin as input with high impedance (High-Z)                     | `DDRB &= ~(1<<2)`                              | `palSetLineMode(pin, PAL_MODE_INPUT)`           |
+|`setPinInputHigh(pin)`|Set pin as input with builtin pull-up resistor                    | `DDRB &= ~(1<<2); PORTB \|= (1<<2)`             | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)`    |
+|`setPinInputLow(pin)` |Set pin as input with builtin pull-down resistor                  | N/A (Not supported on AVR)                     | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)`  |
+|`setPinOutput(pin)`   |Set pin as output                                                 | `DDRB \|= (1<<2)`                               | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
+|`writePinHigh(pin)`   |Set pin level as high, assuming it is an output                   | `PORTB \|= (1<<2)`                              | `palSetLine(pin)`                               |
+|`writePinLow(pin)`    |Set pin level as low, assuming it is an output                    | `PORTB &= ~(1<<2)`                             | `palClearLine(pin)`                             |
+|`writePin(pin, level)`|Set pin level, assuming it is an output                           | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
+|`readPin(pin)`        |Returns the level of the pin                                      | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)`          | `palReadLine(pin)`                              |
 
 ## Advanced Settings
 
 Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
-

docs/keycodes.md

@@ -55,7 +55,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_EQUAL`             |`KC_EQL`                      |`=` and `+`                                    |
 |`KC_LBRACKET`          |`KC_LBRC`                     |`[` and `{`                                    |
 |`KC_RBRACKET`          |`KC_RBRC`                     |`]` and `}`                                    |
-|`KC_BSLASH`            |`KC_BSLS`                     |`\` and <code>&#124;</code>                    |
+|`KC_BSLASH`            |`KC_BSLS`                     |`\` and `\|`                                   |
 |`KC_NONUS_HASH`        |`KC_NUHS`                     |Non-US `#` and `~`                             |
 |`KC_SCOLON`            |`KC_SCLN`                     |`;` and `:`                                    |
 |`KC_QUOTE`             |`KC_QUOT`                     |`'` and `"`                                    |
@@ -106,7 +106,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_KP_9`              |`KC_P9`                       |Keypad `9` and Page Up                         |
 |`KC_KP_0`              |`KC_P0`                       |Keypad `0` and Insert                          |
 |`KC_KP_DOT`            |`KC_PDOT`                     |Keypad `.` and Delete                          |
-|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and <code>&#124;</code>             |
+|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and `\|`                            |
 |`KC_APPLICATION`       |`KC_APP`                      |Application (Windows Menu Key)                 |
 |`KC_POWER`             |                              |System Power (macOS)                           |
 |`KC_KP_EQUAL`          |`KC_PEQL`                     |Keypad `=`                                     |
@@ -143,7 +143,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_KP_EQUAL_AS400`    |                              |Keypad `=` on AS/400 keyboards                 |
 |`KC_INT1`              |`KC_RO`                       |JIS `\` and `_`                                |
 |`KC_INT2`              |`KC_KANA`                     |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and <code>&#124;</code>                |
+|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and `\|`                               |
 |`KC_INT4`              |`KC_HENK`                     |JIS Henkan                                     |
 |`KC_INT5`              |`KC_MHEN`                     |JIS Muhenkan                                   |
 |`KC_INT6`              |                              |JIS Numpad `,`                                 |
@@ -185,8 +185,8 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_AUDIO_MUTE`        |`KC_MUTE`                     |Mute                                           |
 |`KC_AUDIO_VOL_UP`      |`KC_VOLU`                     |Volume Up                                      |
 |`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`                     |Volume Down                                    |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track (Windows)                           |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track (Windows)                       |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track                                     |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track                                 |
 |`KC_MEDIA_STOP`        |`KC_MSTP`                     |Stop Track (Windows)                           |
 |`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`                     |Play/Pause Track                               |
 |`KC_MEDIA_SELECT`      |`KC_MSEL`                     |Launch Media Player (Windows)                  |
@@ -257,28 +257,37 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Bootmagic](feature_bootmagic.md)
 
-|Key                               |Aliases  |Description                         |
-|----------------------------------|---------|------------------------------------|
-|`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Caps Lock and Left Control     |
-|`MAGIC_CAPSLOCK_TO_CONTROL`       |         |Treat Caps Lock as Control          |
-|`MAGIC_SWAP_LALT_LGUI`            |         |Swap Left Alt and GUI               |
-|`MAGIC_SWAP_RALT_RGUI`            |         |Swap Right Alt and GUI              |
-|`MAGIC_NO_GUI`                    |         |Disable the GUI key                 |
-|`MAGIC_SWAP_GRAVE_ESC`            |         |Swap <code>&#96;</code> and Escape  |
-|`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace              |
-|`MAGIC_HOST_NKRO`                 |         |Force NKRO on                       |
-|`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides      |
-|`MAGIC_UNSWAP_CONTROL_CAPSLOCK`   |         |Unswap Caps Lock and Left Control   |
-|`MAGIC_UNCAPSLOCK_TO_CONTROL`     |         |Stop treating Caps Lock as Control  |
-|`MAGIC_UNSWAP_LALT_LGUI`          |         |Unswap Left Alt and GUI             |
-|`MAGIC_UNSWAP_RALT_RGUI`          |         |Unswap Right Alt and GUI            |
-|`MAGIC_UNNO_GUI`                  |         |Enable the GUI key                  |
-|`MAGIC_UNSWAP_GRAVE_ESC`          |         |Unswap <code>&#96;</code> and Escape|
-|`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace            |
-|`MAGIC_UNHOST_NKRO`               |         |Force NKRO off                      |
-|`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI on both sides    |
-|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap on both sides|
-|`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                 |
+|Key                               |Aliases  |Description                                |
+|----------------------------------|---------|-------------------------------------------|
+|`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Caps Lock and Left Control            |
+|`MAGIC_CAPSLOCK_TO_CONTROL`       |         |Treat Caps Lock as Control                 |
+|`MAGIC_SWAP_LCTL_LGUI`            |         |Swap Left Control and GUI                  |
+|`MAGIC_SWAP_RCTL_RGUI`            |         |Swap Right Control and GUI                 |
+|`MAGIC_SWAP_LALT_LGUI`            |         |Swap Left Alt and GUI                      |
+|`MAGIC_SWAP_RALT_RGUI`            |         |Swap Right Alt and GUI                     |
+|`MAGIC_NO_GUI`                    |         |Disable the GUI key                        |
+|`MAGIC_SWAP_GRAVE_ESC`            |         |Swap <code>&#96;</code> and Escape         |
+|`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace                     |
+|`MAGIC_HOST_NKRO`                 |         |Force NKRO on                              |
+|`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides             |
+|`MAGIC_SWAP_CTL_GUI`              |`CG_SWAP`|Swap Ctrl and GUI on both sides (for macOS)|
+|`MAGIC_UNSWAP_CONTROL_CAPSLOCK`   |         |Unswap Caps Lock and Left Control          |
+|`MAGIC_UNCAPSLOCK_TO_CONTROL`     |         |Stop treating Caps Lock as Control         |
+|`MAGIC_UNSWAP_LCTL_LGUI`          |         |Unswap Left Control and GUI                |
+|`MAGIC_UNSWAP_RCTL_RGUI`          |         |Unswap Right Control and GUI               |
+|`MAGIC_UNSWAP_LALT_LGUI`          |         |Unswap Left Alt and GUI                    |
+|`MAGIC_UNSWAP_RALT_RGUI`          |         |Unswap Right Alt and GUI                   |
+|`MAGIC_UNNO_GUI`                  |         |Enable the GUI key                         |
+|`MAGIC_UNSWAP_GRAVE_ESC`          |         |Unswap <code>&#96;</code> and Escape       |
+|`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace                   |
+|`MAGIC_UNHOST_NKRO`               |         |Force NKRO off                             |
+|`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI on both sides           |
+|`MAGIC_UNSWAP_CTL_GUI`            |`CG_NORM`|Unswap Ctrl and GUI on both sides          |
+|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap on both sides      |
+|`MAGIC_TOGGLE_CTL_GUI`            |`CG_TOGG`|Toggle Ctrl and GUI swap on both sides     |
+|`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                        |
+|`MAGIC_EE_HANDS_LEFT`             |         |Set "Left Hand" for EE_HANDS handedness    |
+|`MAGIC_EE_HANDS_RIGHT`            |         |Set "Right Hand" for EE_HANDS handedness   |
 
 ## [Bluetooth](feature_bluetooth.md)
 
@@ -411,29 +420,29 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [US ANSI Shifted Symbols](keycodes_us_ansi_shifted.md)
 
-|Key                     |Aliases            |Description        |
-|------------------------|-------------------|-------------------|
-|`KC_TILDE`              |`KC_TILD`          |`~`                |
-|`KC_EXCLAIM`            |`KC_EXLM`          |`!`                |
-|`KC_AT`                 |                   |`@`                |
-|`KC_HASH`               |                   |`#`                |
-|`KC_DOLLAR`             |`KC_DLR`           |`$`                |
-|`KC_PERCENT`            |`KC_PERC`          |`%`                |
-|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`                |
-|`KC_AMPERSAND`          |`KC_AMPR`          |`&`                |
-|`KC_ASTERISK`           |`KC_ASTR`          |`*`                |
-|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`                |
-|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`                |
-|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`                |
-|`KC_PLUS`               |                   |`+`                |
-|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`                |
-|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`                |
-|`KC_PIPE`               |                   |<code>&#124;</code>|
-|`KC_COLON`              |`KC_COLN`          |`:`                |
-|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`                |
-|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`                |
-|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`                |
-|`KC_QUESTION`           |`KC_QUES`          |`?`                |
+|Key                     |Aliases            |Description|
+|------------------------|-------------------|-----------|
+|`KC_TILDE`              |`KC_TILD`          |`~`        |
+|`KC_EXCLAIM`            |`KC_EXLM`          |`!`        |
+|`KC_AT`                 |                   |`@`        |
+|`KC_HASH`               |                   |`#`        |
+|`KC_DOLLAR`             |`KC_DLR`           |`$`        |
+|`KC_PERCENT`            |`KC_PERC`          |`%`        |
+|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`        |
+|`KC_AMPERSAND`          |`KC_AMPR`          |`&`        |
+|`KC_ASTERISK`           |`KC_ASTR`          |`*`        |
+|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`        |
+|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`        |
+|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`        |
+|`KC_PLUS`               |                   |`+`        |
+|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`        |
+|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`        |
+|`KC_PIPE`               |                   |`\|`       |
+|`KC_COLON`              |`KC_COLN`          |`:`        |
+|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`        |
+|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`        |
+|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`        |
+|`KC_QUESTION`           |`KC_QUES`          |`?`        |
 
 ## [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
 

docs/keycodes_basic.md

@@ -85,7 +85,7 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 |`KC_EQUAL`       |`KC_EQL`           |`=` and `+`                                    |
 |`KC_LBRACKET`    |`KC_LBRC`          |`[` and `{`                                    |
 |`KC_RBRACKET`    |`KC_RBRC`          |`]` and `}`                                    |
-|`KC_BSLASH`      |`KC_BSLS`          |`\` and <code>&#124;</code>                    |
+|`KC_BSLASH`      |`KC_BSLS`          |`\` and `\|`                                   |
 |`KC_NONUS_HASH`  |`KC_NUHS`          |Non-US `#` and `~`                             |
 |`KC_SCOLON`      |`KC_SCLN`          |`;` and `:`                                    |
 |`KC_QUOTE`       |`KC_QUOT`          |`'` and `"`                                    |
@@ -93,7 +93,7 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 |`KC_COMMA`       |`KC_COMM`          |`,` and `<`                                    |
 |`KC_DOT`         |                   |`.` and `>`                                    |
 |`KC_SLASH`       |`KC_SLSH`          |`/` and `?`                                    |
-|`KC_NONUS_BSLASH`|`KC_NUBS`          |Non-US `\` and <code>&#124;</code>             |
+|`KC_NONUS_BSLASH`|`KC_NUBS`          |Non-US `\` and `\|`                            |
 
 ## Lock Keys
 
@@ -121,26 +121,26 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## International
 
-|Key       |Aliases  |Description                    |
-|----------|---------|-------------------------------|
-|`KC_INT1` |`KC_RO`  |JIS `\` and `_`                |
-|`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana          |
-|`KC_INT3` |`KC_JYEN`|JIS `¥` and <code>&#124;</code>|
-|`KC_INT4` |`KC_HENK`|JIS Henkan                     |
-|`KC_INT5` |`KC_MHEN`|JIS Muhenkan                   |
-|`KC_INT6` |         |JIS Numpad `,`                 |
-|`KC_INT7` |         |International 7                |
-|`KC_INT8` |         |International 8                |
-|`KC_INT9` |         |International 9                |
-|`KC_LANG1`|`KC_HAEN`|Hangul/English                 |
-|`KC_LANG2`|`KC_HANJ`|Hanja                          |
-|`KC_LANG3`|         |JIS Katakana                   |
-|`KC_LANG4`|         |JIS Hiragana                   |
-|`KC_LANG5`|         |JIS Zenkaku/Hankaku            |
-|`KC_LANG6`|         |Language 6                     |
-|`KC_LANG7`|         |Language 7                     |
-|`KC_LANG8`|         |Language 8                     |
-|`KC_LANG9`|         |Language 9                     |
+|Key       |Aliases  |Description          |
+|----------|---------|---------------------|
+|`KC_INT1` |`KC_RO`  |JIS `\` and `_`      |
+|`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana|
+|`KC_INT3` |`KC_JYEN`|JIS `¥` and `\|`     |
+|`KC_INT4` |`KC_HENK`|JIS Henkan           |
+|`KC_INT5` |`KC_MHEN`|JIS Muhenkan         |
+|`KC_INT6` |         |JIS Numpad `,`       |
+|`KC_INT7` |         |International 7      |
+|`KC_INT8` |         |International 8      |
+|`KC_INT9` |         |International 9      |
+|`KC_LANG1`|`KC_HAEN`|Hangul/English       |
+|`KC_LANG2`|`KC_HANJ`|Hanja                |
+|`KC_LANG3`|         |JIS Katakana         |
+|`KC_LANG4`|         |JIS Hiragana         |
+|`KC_LANG5`|         |JIS Zenkaku/Hankaku  |
+|`KC_LANG6`|         |Language 6           |
+|`KC_LANG7`|         |Language 7           |
+|`KC_LANG8`|         |Language 8           |
+|`KC_LANG9`|         |Language 9           |
 
 ## Commands
 
@@ -191,7 +191,7 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 These keycodes are not part of the Keyboard/Keypad usage page. The `SYSTEM_` keycodes are found in the Generic Desktop page, and the rest are located in the Consumer page.
 
-Windows and macOS use different keycodes for "next track" and "previous track". Make sure you choose the keycode that corresponds to your OS.
+?> Some of these keycodes may behave differently depending on the OS. For example, on macOS, the keycodes `KC_MEDIA_FAST_FORWARD`, `KC_MEDIA_REWIND`, `KC_MEDIA_NEXT_TRACK` and `KC_MEDIA_PREV_TRACK` skip within the current track when held, but skip the entire track when tapped.
 
 |Key                    |Aliases  |Description                  |
 |-----------------------|---------|-----------------------------|
@@ -201,8 +201,8 @@ Windows and macOS use different keycodes for "next track" and "previous track".
 |`KC_AUDIO_MUTE`        |`KC_MUTE`|Mute                         |
 |`KC_AUDIO_VOL_UP`      |`KC_VOLU`|Volume Up                    |
 |`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`|Volume Down                  |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track (Windows)         |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track (Windows)     |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track                   |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track               |
 |`KC_MEDIA_STOP`        |`KC_MSTP`|Stop Track (Windows)         |
 |`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`|Play/Pause Track             |
 |`KC_MEDIA_SELECT`      |`KC_MSEL`|Launch Media Player (Windows)|

docs/keycodes_us_ansi_shifted.md

@@ -12,26 +12,26 @@ To fix this, open Remote Desktop Connection, click on "Show Options", open the t
 
 ## Keycodes
 
-|Key                     |Aliases            |Description        |
-|------------------------|-------------------|-------------------|
-|`KC_TILDE`              |`KC_TILD`          |`~`                |
-|`KC_EXCLAIM`            |`KC_EXLM`          |`!`                |
-|`KC_AT`                 |                   |`@`                |
-|`KC_HASH`               |                   |`#`                |
-|`KC_DOLLAR`             |`KC_DLR`           |`$`                |
-|`KC_PERCENT`            |`KC_PERC`          |`%`                |
-|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`                |
-|`KC_AMPERSAND`          |`KC_AMPR`          |`&`                |
-|`KC_ASTERISK`           |`KC_ASTR`          |`*`                |
-|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`                |
-|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`                |
-|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`                |
-|`KC_PLUS`               |                   |`+`                |
-|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`                |
-|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`                |
-|`KC_PIPE`               |                   |<code>&#124;</code>|
-|`KC_COLON`              |`KC_COLN`          |`:`                |
-|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`                |
-|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`                |
-|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`                |
-|`KC_QUESTION`           |`KC_QUES`          |`?`                |
+|Key                     |Aliases            |Description|
+|------------------------|-------------------|-----------|
+|`KC_TILDE`              |`KC_TILD`          |`~`        |
+|`KC_EXCLAIM`            |`KC_EXLM`          |`!`        |
+|`KC_AT`                 |                   |`@`        |
+|`KC_HASH`               |                   |`#`        |
+|`KC_DOLLAR`             |`KC_DLR`           |`$`        |
+|`KC_PERCENT`            |`KC_PERC`          |`%`        |
+|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`        |
+|`KC_AMPERSAND`          |`KC_AMPR`          |`&`        |
+|`KC_ASTERISK`           |`KC_ASTR`          |`*`        |
+|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`        |
+|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`        |
+|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`        |
+|`KC_PLUS`               |                   |`+`        |
+|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`        |
+|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`        |
+|`KC_PIPE`               |                   |`\|`       |
+|`KC_COLON`              |`KC_COLN`          |`:`        |
+|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`        |
+|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`        |
+|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`        |
+|`KC_QUESTION`           |`KC_QUES`          |`?`        |

docs/newbs_building_firmware.md

@@ -8,15 +8,15 @@ If you have closed and reopened your terminal window since following the first p
 
 Start by navigating to the `keymaps` folder for your keyboard.
 
-?> If you are on macOS or Windows there are commands you can use to easily open the keymaps folder.
+If you are on macOS or Windows there are commands you can use to easily open the keymaps folder.
 
-?> macOS:
+### macOS:
 
-    open keyboards/<keyboard_folder>/keymaps
+``` open keyboards/<keyboard_folder>/keymaps ```
 
-?> Windows:
+### Windows:
 
-    start .\\keyboards\\<keyboard_folder>\\keymaps
+``` start .\\keyboards\\<keyboard_folder>\\keymaps ```
 
 ## Create a Copy Of The `default` Keymap
 

docs/newbs_flashing.md

@@ -12,23 +12,31 @@ However, the QMK Toolbox is only available for Windows and macOS currently.  If
 
 Begin by opening the QMK Toolbox application. You'll want to locate the firmware file in Finder or Explorer. Your keyboard firmware may be in one of two formats- `.hex` or `.bin`. QMK tries to copy the appropriate one for your keyboard into the root `qmk_firmware` directory.
 
-?> If you are on Windows or macOS there are commands you can use to easily open the current firmware folder in Explorer or Finder.
+If you are on Windows or macOS there are commands you can use to easily open the current firmware folder in Explorer or Finder.
 
-?> Windows:
+#### Windows
 
-    start .
+```
+start .
+```
 
-?> macOS:
+#### macOS
 
-    open .
+```
+open .
+```
 
 The firmware file always follows this naming format:
 
-    <keyboard_name>_<keymap_name>.{bin,hex}
+```
+<keyboard_name>_<keymap_name>.{bin,hex}
+```
 
-For example, the `plank/rev5` with a `default` keymap will have this filename:
+For example, the `planck/rev5` with a `default` keymap will have this filename:
 
-    planck_rev5_default.hex
+```
+planck_rev5_default.hex
+```
 
 Once you have located your firmware file drag it into the "Local file" box in QMK Toolbox, or click "Open" and navigate to where your firmware file is stored. 
 
@@ -78,7 +86,23 @@ Click the `Flash` button in QMK Toolbox. You will see output similar to the foll
 
 ## Flash your Keyboard from the Command Line
 
-First thing you'll need to know is which bootloader that your keyboard uses.  There are four main bootloaders that are used, usually. Pro-Micro and clones use CATERINA, and Teensy's use Halfkay, OLKB boards use QMK-DFU, and other atmega32u4 chips use DFU. 
+This has been made pretty simple compared to what it used to be.  When you are ready to compile and flash your firmware, open up your terminal window and run the build command: 
+
+    make <my_keyboard>:<my_keymap>:flash
+
+For example, if your keymap is named "xyverz" and you're building a keymap for a rev5 planck, you'll use this command:
+
+    make planck/rev5:xyverz:flash
+
+This will check the keyboard's configuration, and then attempt to flash it based on the specified bootloader.  This means that you don't need to know which bootloader that your keyboard uses.  Just run the command, and let the command do the heavy lifting.
+
+However, this does rely on the bootloader being set by the keyboard.  If this information is not configured, or you're using a board that doesn't have a supported target to flash it, you will see this error:
+
+    WARNING: This board's bootloader is not specified or is not supported by the ":flash" target at this time.
+
+In this case, you'll have to fall back on specifying the bootloader.
+
+There are five main bootloaders that are used. Pro Micro and clones use Caterina, Teensys use HalfKay, OLKB's AVR boards use QMK-DFU, other ATmega32U4 boards use DFU, and most ARM boards use ARM DFU.
 
 You can find more information about the bootloaders in the [Flashing Instructions and Bootloader Information](flashing.md) page. 
 
@@ -109,7 +133,7 @@ After it gets to this point, the build script will look for the DFU bootloader e
     dfu-programmer: no device present.
     Error: Bootloader not found. Trying again in 5s.
 
-Once it does this, you'll want to reset the controller.  It should then show output similiar to this: 
+Once it does this, you'll want to reset the controller.  It should then show output similar to this: 
 
 ```
 *** Attempting to flash, please don't remove device
@@ -208,14 +232,17 @@ If you have any issues with this, you may need to this:
     sudo make <my_keyboard>:<my_keymap>:avrdude
 
 
-Additionally, if you want to flash multiple boards, use the following command:
+#### Caterina commands
 
-    make <keyboard>:<keymap>:avrdude-loop
+There are a number of DFU commands that you can use to flash firmware to a DFU device:
 
-When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
+* `:avrdude` - This is the normal option which waits until a Caterina device is available (by detecting a new COM port), and then flashes the firmware.
+* `:avrdude-loop` - This runs the same command as `:avrdude`, but after each device is flashed, it will attempt to flash again.  This is useful for bulk flashing. _This requires you to manually escape the loop by hitting Control+C._
+* `:avrdude-split-left` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._
+* `:avrdude-split-right` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._
 
 
-## HalfKay
+### HalfKay
 
 For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
@@ -248,7 +275,7 @@ Programming.....................................................................
 Booting
 ```
 
-## STM32 (ARM)
+### STM32 (ARM)
 
 For a majority of ARM boards (including the Proton C, Planck Rev 6, and Preonic Rev 3), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
@@ -298,6 +325,52 @@ File downloaded successfully
 Transitioning to dfuMANIFEST state
 ```
 
+#### STM32 Commands
+
+There are a number of DFU commands that you can use to flash firmware to a STM32 device:
+
+* `:dfu-util` - The default command for flashing to STM32 devices, and will wait until an STM32 bootloader is present. . 
+* `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards.
+* `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards.
+* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 
+
+
+### BootloadHID
+
+For Bootmapper Client(BMC)/bootloadHID/ATmega32A based boards, when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
+
+    make <my_keyboard>:<my_keymap>:bootloaderHID
+
+For example, if your keymap is named "xyverz" and you're building a keymap for a jj40, you'll use this command:
+
+    make jj40:xyverz:bootloaderHID
+
+Once the firmware finishes compiling, it will output something like this: 
+
+```
+Linking: .build/jj40_default.elf                                                                   [OK]
+Creating load file for flashing: .build/jj40_default.hex                                           [OK]
+Copying jj40_default.hex to qmk_firmware folder                                                    [OK]
+Checking file size of jj40_default.hex                                                             [OK]
+ * The firmware size is fine - 21920/28672 (6752 bytes free)
+```
+
+After it gets to this point, the build script will look for the DFU bootloader every 5 seconds.  It will repeat the following until the device is found or you cancel it. 
+
+```
+Error opening HIDBoot device: The specified device was not found
+Trying again in 5s.
+```
+
+Once it does this, you'll want to reset the controller.  It should then show output similar to this: 
+
+```
+Page size   = 128 (0x80)
+Device size = 32768 (0x8000); 30720 bytes remaining
+Uploading 22016 (0x5600) bytes starting at 0 (0x0)
+0x05580 ... 0x05600
+```
+
 ## Test It Out!
 
 Congrats! Your custom firmware has been programmed to your keyboard!

docs/newbs_testing_debugging.md

@@ -8,7 +8,8 @@ Testing your keyboard is usually pretty straightforward. Press every single key
 
 Note: These programs are not provided by or endorsed by QMK.
 
-* [Switch Hitter](https://elitekeyboards.com/switchhitter.php) (Windows Only)
+* [QMK Configurator](https://config.qmk.fm/#/test/) (Web Based)
+* [Switch Hitter](https://web.archive.org/web/20190413233743/https://elitekeyboards.com/switchhitter.php) (Windows Only)
 * [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (Mac Only)
 * [Keyboard Tester](http://www.keyboardtester.com) (Web Based)
 * [Keyboard Checker](http://keyboardchecker.com) (Web Based)

docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md

@@ -34,7 +34,7 @@ For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the
 
 To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.
 
-`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported.
+`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to.
 
 `BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap.
 

docs/python_development.md

@@ -1,45 +0,0 @@
-# Python Development in QMK
-
-This document gives an overview of how QMK has structured its python code. You should read this before working on any of the python code.
-
-## Script directories
-
-There are two places scripts live in QMK: `qmk_firmware/bin` and `qmk_firmware/util`. You should use `bin` for any python scripts that utilize the `qmk` wrapper. Scripts that are standalone and not run very often live in `util`.
-
-We discourage putting anything into `bin` that does not utilize the `qmk` wrapper. If you think you have a good reason for doing so please talk to us about your use case.
-
-## Python Modules
-
-Most of the QMK python modules can be found in `qmk_firmware/lib/python`. This is the path that we append to `sys.path`.
-
-We have a module hierarchy under that path:
-
-* `qmk_firmware/lib/python`
-    * `milc.py` - The CLI library we use. Will be pulled out into its own module in the future.
-    * `qmk` - Code associated with QMK
-        * `cli` - Modules that will be imported for CLI commands.
-        * `errors.py` - Errors that can be raised within QMK apps
-        * `keymap.py` - Functions for working with keymaps
-
-## CLI Scripts
-
-We have a CLI wrapper that you should utilize for any user facing scripts. We think it's pretty easy to use and it gives you a lot of nice things for free.
-
-To use the wrapper simply place a module into `qmk_firmware/lib/python/qmk/cli`, and create a symlink to `bin/qmk` named after your module. Dashes in command names will be converted into dots so you can use hierarchy to manage commands.
-
-When `qmk` is run it checks to see how it was invoked. If it was invoked as `qmk` the module name is take from `sys.argv[1]`. If it was invoked as `qmk-<module-name>` then everything after the first dash is taken as the module name. Dashes and underscores are converted to dots, and then `qmk.cli` is prepended before the module is imported.
-
-The module uses `@cli.entrypoint()` and `@cli.argument()` decorators to define an entrypoint, which is where execution starts.
-
-## Example CLI Script
-
-We have provided a QMK Hello World script you can use as an example. To run it simply run `qmk hello` or `qmk-hello`. The source code is listed below.
-
-```
-from milc import cli
-
-@cli.argument('-n', '--name', default='World', help='Name to greet.')
-@cli.entrypoint('QMK Python Hello World.')
-def main(cli):
-    cli.echo('Hello, %s!', cli.config.general.name)
-```

docs/redirects.json

@@ -43,6 +43,10 @@
             {
                 "from": "unicode.html",
                 "to": "feature_unicode.html"
+            },
+            {
+                "from": "python_development.html",
+                "to": "cli_development.html"
             }
         ]
 }

docs/ref_functions.md

@@ -50,7 +50,7 @@ The caveat to this method is that you cannot access the `z` layer without having
 #### Example
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
+layer_state_t layer_state_set_user(layer_state_t state) {
   return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
 }
 ```
@@ -58,7 +58,7 @@ uint32_t layer_state_set_user(uint32_t state) {
 Alternatively, you don't have to immediately "return" the value.  This is useful if you want to add multiple tri layers, or if you want to add additional effects.
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
+layer_state_t layer_state_set_user(layer_state_t state) {
   state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
   state = update_tri_layer_state(state, _RAISE, _SYMB, _SPECIAL);
   return state;

docs/reference_glossary.md

@@ -1,16 +1,16 @@
 # Glossary of QMK Terms
 
 ## ARM
-A line of 32-bit MCU's produced by a number of companies, such as Atmel, Cypress, Kinetis, NXP, ST, and TI.
+A line of 32-bit MCUs produced by a number of companies, such as Atmel, Cypress, Kinetis, NXP, ST, and TI.
 
 ## AVR
-A line of 8-bit MCU's produced by [Atmel](http://www.microchip.com/). AVR was the original platform that TMK supported.
+A line of 8-bit MCUs produced by [Atmel](http://www.microchip.com/). AVR was the original platform that TMK supported.
 
 ## AZERTY
 The standard Français (French) keyboard layout. Named for the first 6 keys on the keyboard.
 
 ## Backlight
-A generic term for lighting on a keyboard. The backlight is typically, but not always, an array of LED's that shine through keycaps and/or switches.
+A generic term for lighting on a keyboard. The backlight is typically, but not always, an array of LEDs that shine through keycaps and/or switches.
 
 ## Bluetooth
 A short range peer to peer wireless protocol. Most common wireless protocol for a keyboard.
@@ -147,7 +147,7 @@ A feature that lets you assign multiple keycodes to the same key based on how ma
 A low-cost AVR development board that is commonly used for hand-wired builds. A teensy is often chosen despite costing a few dollars more due to its halfkay bootloader, which makes flashing very simple.
 
 ## Underlight
-A generic term for LEDs that light the underside of the board. These LED's typically shine away from the bottom of the PCB and towards the surface the keyboard rests on.
+A generic term for LEDs that light the underside of the board. These LEDs typically shine away from the bottom of the PCB and towards the surface the keyboard rests on.
 
 ## Unicode
 In the larger computer world Unicode is a set of encoding schemes for representing characters in any language. As it relates to QMK it means using various OS schemes to send unicode codepoints instead of scancodes.

docs/ru-ru/README.md

@@ -0,0 +1,32 @@
+# Quantum Mechanical Keyboard Firmware
+
+[![Current Version](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)
+[![Build Status](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware)
+[![Discord](https://img.shields.io/discord/440868230475677696.svg)](https://discord.gg/Uq7gcHh)
+[![Docs Status](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm)
+[![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
+[![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
+
+## Что такое QMK Firmware?
+
+QMK (*Quantum Mechanical Keyboard*) — это сообщество, работающее над ПО с открытым исходным кодом, которое разрабатывает QMK Firmware, QMK Toolbox, qmk.fm и эту документацию. QMK Firmware — это прошивка для клавиатур, основанная на [tmk\_keyboard](http://github.com/tmk/tmk_keyboard) с множеством полезных функций для микроконтроллеров Atmel AVR, а именно, для продуктов компаний [OLKB](http://olkb.com), [ErgoDox EZ](http://www.ergodox-ez.com) и [Clueboard](http://clueboard.co/). Она также была портирована на чипы ARM при помощи ChibiOS. Вы можете использовать ее для клавиатуры, собранной вручную или имеющей нестандартную печатную плату.
+
+## Как скачать
+
+Если вы собираетесь добавить раскладку, клавиатуру или новые функции в QMK, то самый простой путь реализации — это [сделать форк репозитория на GitHub](https://github.com/qmk/qmk_firmware#fork-destination-box), клонировать ваш репозиторий локально для дальнейшего внесения изменений, сделать пуш изменений, а затем открыть [пулреквест](https://github.com/qmk/qmk_firmware/pulls) из вашего форка.
+
+Также вы можете либо скачать репозиторий ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), либо клонировать его через git (`git@github.com:qmk/qmk_firmware.git`) или https (`https://github.com/qmk/qmk_firmware.git`).
+
+## Как скомпилировать
+
+Перед компиляцией вам необходимо [настроить окружение](ru-ru/getting_started_build_tools.md) разработчика для AVR или/и ARM. После этого используйте команду `make` со следующим синтаксисом, чтобы собрать клавиатуру и раскладку:
+
+    make planck/rev4:default
+
+Данная команда соберет ревизию `rev4` клавиатуры `planck` с раскладкой `default`. Не все клавиатуры имеют ревизии (они также называются subprojects или folders), в этом случае она может быть опущена:
+
+    make preonic:default
+
+## Как настроить
+
+QMK обладает множеством [функций](ru-ru/features.md) для исследования, и [справочная документация](http://docs.qmk.fm) может стать хорошей отправной точкой для знакомства с ними. Большинством функций можно воспользоваться модифицируя [раскладку](ru-ru/keymap.md) и изменяя [коды клавиш](ru-ru/keycodes.md).

docs/ru-ru/getting_started_build_tools.md

@@ -0,0 +1,168 @@
+# Установка инструментов для сборки
+
+Данная страница описывает процесс установки окружения для сборки QMK. Эти инструкции относятся к процессорам AVR (таким как atmega32u4).
+
+<!-- FIXME: Нужно написать и добавить куда-нибудь инструкции для ARM. -->
+
+**Примечание:** Если вы здесь впервые, ознакомьтесь с [Руководством для полных новичков](ru-ru/newbs.md).
+
+Прежде, чем продолжить, убедитесь, что у вас обновлены подмодули (сторонние библиотеки), выполнив `make git-submodule`.
+
+## Linux
+
+Чтобы всегда быть уверенными, что у вас установлены последние версии ПО, можно просто выполнить команду `sudo util/qmk_install.sh`. Она должна установить все необходимые зависимости. **Это выполнит `apt-get upgrade`.**
+
+Вы также можете устанавливать все вручную, но в данной документации список требований может не всегда быть актуальным.
+
+Текущие требования представлены ниже, но не все они могут быть необходимы, так как зависят от того, что вы делаете. Также стоит отметить, что в некоторых системах не все зависимости доступны в виде пакетов, или они могут называться по-другому.
+
+```
+build-essential
+gcc
+unzip
+wget
+zip
+gcc-avr
+binutils-avr
+avr-libc
+dfu-programmer
+dfu-util
+gcc-arm-none-eabi
+binutils-arm-none-eabi
+libnewlib-arm-none-eabi
+git
+```
+
+Установите все зависимости при помощи вашего любимого менеджера пакетов.
+
+Пример для Debian / Ubuntu:
+
+    sudo apt-get update
+    sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
+
+Пример для Fedora / Red Hat:
+
+    sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
+    
+Пример для Arch / Manjaro:
+
+    pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git dfu-programmer dfu-util
+
+## Nix
+
+Если вы используете [NixOS](https://nixos.org/), или у вас установлена Nix в Linux или macOS, выполните `nix-shell` из корня репозитория, чтобы настроить окружение для сборки.
+
+По умолчанию, это скачает компиляторы для AVR и ARM. Если вам не нужны они оба, отключите `avr` или `arm` с помощью аргумента, например:
+
+    nix-shell --arg arm false
+
+## macOS
+
+Если вы пользуетесь [Homebrew](https://brew.sh/), вы можете использовать следующие команды:
+
+    brew tap osx-cross/avr
+    brew tap PX4/homebrew-px4
+    brew update
+    brew install avr-gcc@8
+    brew link --force avr-gcc@8
+    brew install dfu-programmer
+    brew install dfu-util
+    brew install gcc-arm-none-eabi
+    brew install avrdude
+
+Данный метод является рекомендуемым. Если у вас нет Homebrew, [установите его!](http://brew.sh/) Он очень сильно пригодится тем, кто работает с командной строкой. Стоит отметить, что часть с `make` и `make install` во время установки `avr-gcc@8` из Homebrew может занимать более 20 минут и сильно нагружать CPU.
+
+## Windows с MSYS2 (рекомендуется)
+
+Наилучшим окружение для Windows Vista и всех последующих версий (тестировалось с 7 и 10) является [MSYS2](https://www.msys2.org).
+
+* Для установки MSYS2, скачайте его и следуйте дальнейшим указаниям отсюда: http://www.msys2.org
+* Откройте ``MSYS2 MingGW 64-bit`` ярлык
+* Перейдите в свой репозиторий QMK. Например, если он находится в корне вашего диска C:
+  * `$ cd /c/qmk_firmware`
+* Запустите `util/qmk_install.sh` и следуйте подсказкам
+
+## Windows 10 (устарело)
+
+Это устаревшие инструкции для Windows 10. Мы рекомендуем использовать [MSYS2, как сказано выше](#windows-с-msys2-рекомендуется).
+
+### Обновление для дизайнеров (Creators Update)
+
+Если у вас Windows 10 с Обновлением для дизайнеров или новее, вы можете собрать прошивку и прошить ей напрямую. До Обновления для дизайнеров было возможно только собрать прошивку. Если у вас его еще нет, или вы не уверены, следуйте [этим инструкциям](https://support.microsoft.com/en-us/instantanswers/d4efb316-79f0-1aa1-9ef3-dcada78f3fa0/get-the-windows-10-creators-update).
+
+### Подсистема Windows для Linux (Windows Subsystem for Linux, WSL)
+
+В дополнение к Обновлению для дизайнеров вам необходима подсистема Windows для Linux, поэтому установите ее, следуя [иснтрукциям здесь](http://www.howtogeek.com/249966/how-to-install-and-use-the-linux-bash-shell-on-windows-10/). Если у вас уже есть подсистема Windows для Linux из Юбилейного обновления (Anniversary update), рекомендуется ее [обновить](https://betanews.com/2017/04/14/upgrade-windows-subsystem-for-linux/) до 16.04LTS, потому что некоторые клавиатуры не компилируются с набором инструментов из 14.04LTS. Стоит отметить, что вы четко должны понимать, что вы делаете, если выбрали метод `sudo do-release-upgrade`.
+
+### Git
+
+Если вы уже клонировали репозиторий в файловую систему Windows, вы можете пропустить данную секцию.
+
+Вам нужно клонировать репозиторий в файловую систему Windows при помощи обычного Git для Windows, а **не** WSL Git. Так что, если вы ещё не установили Git, [скачайте](https://git-scm.com/download/win) и установите его. Затем [настройте его](https://git-scm.com/book/en/v2/Getting-Started-First-Time-Git-Setup). Важно указать свой адрес электронной почты и имя пользователя, особенно если вы планируете вносить свой вклад в проект.
+
+Как только Git будет установлен, откройте командную строку Git Bash и поменяйте директорию на ту, в которую хотите клонировать QMK; обратите внимание, что вы должны использовать косую черту, и что доступ к вашему диску C осуществляется примерно так: `/c/path/to/where/you/want/to/go`. Затем выполните `git clone --recurse-submodules https://github.com/qmk/qmk_firmware`, это создаст новую папку `qmk_firmware` в текущей директории.
+
+### Установка инструментов (Toolchain)
+
+Установка инструментов (Toolchain) осуществляется через подсистему Windows для Linux, и процесс полностью автоматизирован. Если вы хотите выполнить установку вручную, то не существует никакой другой инструкции помимо самого скрипта. Однако, вы всегда можете открыть ишью и запросить дополнительную информацию.
+
+1. Откройте "Bash On Ubuntu On Windows" в меню Пуск.
+2. Перейдите в папку, в которую клонирована `qmk_firmware`. Обратите внимание, что пути начинаются с `/mnt/` в WSL, так что вы должны написать, например, `cd /mnt/c/path/to/qmk_firmware`.
+3. Запустите `util/wsl_install.sh` и следуйте инструкциям на экране.
+4. Закройте окно командной строки Bash, и откройте его снова.
+5. Все готово, чтобы скомпилировать прошивку и прошить ей!
+
+### Несколько важных вещей, которые надо запомнить
+
+* Вы можете запустить `util/wsl_install.sh` еще раз, чтобы установить все последние обновления.
+* Ваш репозиторий QMK должен находиться в файловой системе Windows, поскольку WSL не может запускать выполняемые файлы извне.
+* WSL Git **не** совместим с Windows Git, поэтому используйте Windows Git Bash или Windows Git GUI для всех операций с Git.
+* Вы можете изменять файлы как внутри WSL, так и просто через Windows. Но обратите внимание, что если вы изменяете makefiles или сценарии командной строки, вы должны убедиться, что используете текстовый редактор, который сохраняет файлы с переводом строки в стиле Unix (Unix line endings). В противном случае компиляция может не работать.
+
+## Windows (Vista и новее) (устарело)
+
+Это устаревшие инструкции для Windows Vista и более новых версий. Мы рекомендуем использовать [MSYS2, как сказано выше](#windows-с-msys2-рекомендуется).
+
+1. Если вы когда-то устанавливали WinAVR, удалите его.
+2. Установите [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Отключите smatch, но **оставьте галочку напротив опции добавления инструмента в PATH**.
+3. Если вы собираетесь прошивать клавиатуры на базе Infinity, вам нужно установить dfu-util. Обратитесь к инструкциям от [Input Club](https://github.com/kiibohd/controller/wiki/Loading-DFU-Firmware).
+4. Установите [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). Во время установки отключите опцию установки графического пользовательского интерфейса. **НЕ ИЗМЕНЯЙТЕ директорию для установки по умолчанию.** Скрипты зависят от расположения по умолчанию.
+5. Выполните клонирование данного репозитория. [Эта ссылка скачает его в виде zip-файла, который вам нужно будет разархивировать.](https://github.com/qmk/qmk_firmware/archive/master.zip) Откройте извлеченную папку в проводнике Windows.
+6. Перейдите в папку `\util`.
+7. Запустите двойным щелчком пакетный файл сценария `1-setup-path-win`. Вам нужно будет согласиться с уведомлением контроля учетных записей пользователей (User Account Control, UAC). Нажмите пробел, чтобы закрыть появившееся сообщение об успешном выполнении операции в командной строке.
+8. Кликните правой кнопкой по пакетному файлу сценария `2-setup-environment-win`, выберите "Запуск от имени администратора" и согласитесь с уведомлением UAC. Это может занять пару минут, и вам потребуется подтвердить установку драйвера. Как только сценарий завершит свою работу, ваше окружение будет готово!
+
+Если у вас возникли проблемы и вам нужна помощь, будет полезно сгенерировать файл *Win_Check_Output.txt*, запустив `Win_Check.bat` в папке `\util`.
+
+## Docker
+
+Если это немного сложновато для вас, Docker может стать готовым решением, которое вы ищите. После установки [Docker CE](https://docs.docker.com/install/#supported-platforms) выполните следующую команду из директории `qmk_firmware`, чтобы собрать клавиатуру/раскладку:
+
+```bash
+util/docker_build.sh keyboard:keymap
+# Например: util/docker_build.sh ergodox_ez:steno
+```
+
+Это скомпилирует указанную клавиатуру/раскладку и создаст для вас `.hex` или `.bin` файл с результатом, готовым к процессу прошивки, в директории QMK. Если опустить `:keymap`, будет использована раскладка `default`. Заметьте, что формат параметров такой же, как и в случае сборки командой `make`.
+
+Вы также можете запустить скрипт без параметров. Тогда он попросит вас ввести поочередно параметры сборки. Возможно, вам это покажется более удобным:
+
+```bash
+util/docker_build.sh
+# Читает параметры из пользовательского ввода (оставьте пустым для значений по умолчанию)
+```
+
+Также имеется поддержка сборки _и_ прошивки клавиатуры прямо из Docker. Для этого укажите еще один параметр `target`:
+
+```bash
+util/docker_build.sh keyboard:keymap:target
+# Например: util/docker_build.sh planck/rev6:default:dfu-util
+```
+
+Если вы используете Linux, это должно работать прямо из коробки. На Windows и macOS это требует запуска [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/). Ее довольно утомительно настраивать, поэтому мы не рекомендуем это; используйте вместо этого [QMK Toolbox](https://github.com/qmk/qmk_toolbox).
+
+!> Docker для Windows требует включения [Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v). Это означает, что он не работает на версиях Windows без Hyper-V, например, на Windows 7, Windows 8 и **Windows 10 Home**.
+
+## Vagrant
+
+Если у вас возникли проблемы при сборке прошивки, вы можете попробовать установить инструмент под названием Vagrant. Он сконфигурирует виртуальный компьютер с такими параметрами, которые подходят для сборки прошивки. У OLKB НЕТ файлов такого виртуально компьютера. Подробности о том, как настроить Vagrant, можно найти в [Руководстве по Vagrant](ru-ru/getting_started_vagrant.md).

docs/ru-ru/newbs.md

@@ -0,0 +1,23 @@
+# Руководство по QMK для полных новичков
+
+QMK ― это мощная прошивка с открытым исходным кодом для вашей механической клавиатуры. Вы можете использовать QMK для легкой и мощной персонализации своей клавиатуры. Люди с разным уровнем умений, от совсем новичков до крутых программистов, успешно применяли QMK, чтобы персонализировать свои клавиатуры. Данное руководство поможет вам сделать то же самое, независимо от уровня вашего мастерства.
+
+Не уверены, поддерживает ли ваша клавиатура QMK? Если это механическая клавиатура, которую вы собрали сами, шансы достаточно велики. Мы поддерживаем [большое число любительских клавиатур](https://qmk.fm/keyboards/), поэтому, даже если ваша текущая клавиатура не совместима с QMK, у вас не должно возникнуть проблем с нахождением подходящей для ваших нужд.
+
+## Обзор
+
+В данном руководстве 7 основных секций:
+
+* [Первое знакомство](ru-ru/newbs_getting_started.md)
+* [Собираем вашу первую прошивку с помощью командной строки](ru-ru/newbs_building_firmware.md)
+* [Собираем вашу первую прошивку с помощью онлайн GUI](ru-ru/newbs_building_firmware_configurator.md)
+* [Прошиваем файл прошивки](ru-ru/newbs_flashing.md)
+* [Тестируем и отлаживаем](ru-ru/newbs_testing_debugging.md)
+* [Лучшие практики по Git](ru-ru/newbs_best_practices.md)
+* [Узнайте больше на этих ресурсах](ru-ru/newbs_learn_more_resources.md)
+
+Данное руководство сосредоточено на помощи тем, кто никогда раньше не компилировал ПО. Приятие решений и рекомендации делаются с учетом именно этого. Существует много альтернативных методов для описанных процедур, и мы поддерживаем большинство из них. Если у вас есть сомнения о том, как выполнить задачу, вы можете [попросить у нас совета](ru-ru/getting_started_getting_help.md).
+
+## Дополнительные ресурсы
+
+* [Блог Томаса Баарта (Thomas Baart) об основах QMK](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – Созданный пользователем блог, охватывающий основы использования QMK Firmware с точки зрения нового пользователя.

docs/ru-ru/newbs_getting_started.md

@@ -0,0 +1,102 @@
+# Введение
+
+У вашей компьютерной клавиатуры внутри есть процессор, похожий на тот, что внутри вашего компьютера. Этот процессор выполняет программное обеспечение, которое отвечает за обнаружение нажатий клавиш и отсылку сигналов состояния клавиатуры, когда клавиши нажимаются и отпускаются. Роль такого ПО выполняет QMK, детектируя нажатия клавиш и отсылая эту информацию главному компьютеру. Сбор собственной раскладки эквивалентен сборке выполняемой программы для вашей клавиатуры.
+
+QMK старается дать вам большую силу, оставляя простые вещи легкими и делай сложные — возможными. Вам не надо уметь программировать, чтобы создавать мощные прошивки — вам только надо следовать нескольким простым синтаксическим правилам.
+
+# Первое знакомство
+
+Перед тем, как вы сможете собирать раскладки, вам необходимо установить некоторое программное обеспечение и настроить ваше окружение для сборки. Это нужно сделать только один раз, вне зависимости от того, для скольких клавиатур вы планируете компилировать прошивки.
+
+Если вы предпочитаете графический пользовательский интерфейс, пожалуйста, рассмотрите возможность использования онлайн [QMK Конфигуратора](https://config.qmk.fm). Пожалуйста, обратитесь к [Собираем вашу первую прошивку с помощью онлайн GUI](ru-ru/newbs_building_firmware_configurator.md). 
+
+
+## Загрузка ПО
+
+### Текстовый редактор
+
+Вам понадобится программа, умеющая редактировать и сохранять **обычные текстовые** файлы. Если вы используете Windows, вы можете делать это Блокнотом, а в Linux вы можете использовать gedit. Обе программы являются простыми, но функциональными редакторами. В macOS остерегайтесь стандартного приложения TextEdit: он не будет сохранять обычные текстовые файлы, пока вы явно не выберите _Make Plain Text_ из меню _Format_.
+
+Вы также можете скачать и установить отдельный текстовый редактор наподобие [Sublime Text](https://www.sublimetext.com/) или [VS Code](https://code.visualstudio.com/). Возможно, это наилучший вариант независимо от платформы, поскольку эти программы сделаны специально для редактирования кода.
+
+?> Не уверены, какой выбрать текстовый редактор? Лоуренс Брэдфорд (Laurence Bradford) написал [отличное введение](https://learntocodewith.me/programming/basics/text-editors/) в тему.
+
+### QMK Toolbox
+
+QMK Toolbox является дополнительной графической программой для Windows и macOS, которая позволяет вам разрабатывать и отлаживать вашу клавиатуру. Вы, вероятно, посчитаете ее бесценной для легкого процесса прошивки вашей клавиатуры и просмотра отладочных сообщений, которые она отображает.
+
+[Скачайте последний выпуск здесь.](https://github.com/qmk/qmk_toolbox/releases/latest)
+
+* Для Windows: `qmk_toolbox.exe` (переносимое приложение) или `qmk_toolbox_install.exe` (установщик)
+* Для macOS: `QMK.Toolbox.app.zip` (переносимое приложение) или `QMK.Toolbox.pkg` (установщик)
+
+## Настройте ваше окружение
+
+Мы постарались сделать установку QMK максимально легкой. Вам нужно только подготовить ваше Linux или Unix окружение, после этого позвольте QMK установить все остальное.
+
+?> Если вы никогда раньше не работали с командной строкой Linux/Unix, существует несколько базовых концептов и команд, которые необходимо выучить. Эти ресурсы дадут вам достаточно знаний, чтобы работать с QMK:<br>
+[Обязательные к изучению команды Linux](https://www.guru99.com/must-know-linux-commands.html)<br>
+[Несколько базовых команд Unix](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
+
+### Windows
+
+Вам нужно будет установить MSYS2 и Git.
+
+* Следуйте инструкциям по установки на [домашней странице MSYS2](https://www.msys2.org).
+* Закройте все открытые терминалы MSYS2 и откройте новый терминал MSYS2 MinGW 64-bit.
+* Установите Git, выполнив эту команду: `pacman -S git`.
+
+### macOS
+
+Вам нужно будет установить Homebrew. Следуйте инструкциям на [домашней странице Homebrew](https://brew.sh).
+
+После установки Homebrew продолжите чтение с _Установите QMK_. На этом шаге вам надо будет запустить скрипт, который установит остальные пакеты.
+
+### Linux
+
+Вам нужно будет установить Git. Скорее всего, он у вас уже есть, но если нет, одна из следующих команд должна установить его:
+
+* Debian / Ubuntu / Devuan: `apt-get install git`
+* Fedora / Red Hat / CentOS: `yum install git`
+* Arch: `pacman -S git`
+
+?> Docker также является вариантом для всех платформ. [Нажмите сюда для получения подробностей.](ru-ru/getting_started_build_tools.md#docker)
+
+## Установите QMK
+
+Как только вы настроили ваше Linux/Unix окружение, вы готовы к загрузке QMK. Мы сделаем это при помощи Git, "клонировав" репозиторий QMK. Откройте Терминал или окно MSYS2 MinGW и оставьте его открытым до конца данного руководства. Выполните эти команды внутри него:
+
+```shell
+git clone --recurse-submodules https://github.com/qmk/qmk_firmware.git
+cd qmk_firmware
+```
+
+?> Если вы уже знаете, [как пользоваться GitHub](ru-ru/getting_started_github.md), мы рекомендуем вам вместо этого создать и клонировать свой собственный форк. Если вы не понимаете, что это значит, просто проигнорируйте это сообщение.
+
+QMK включает в себя скрипт, который поможет вам установить все оставшееся, что вам понадобится. Вы должны запустить его, набрав эту команду:
+
+    util/qmk_install.sh
+
+## Протестируйте ваше окружение для сборки
+
+Теперь, когда ваше окружение QMK для сборки настроено, вы можете собрать прошивку для вашей клавиатуры. Начните с попытки собрать раскладку для клавиатуры по умолчанию. У вас должно это получиться с помощью команды в этом формате:
+
+    make <keyboard>:default
+
+Например, чтобы собрать прошивку для Clueboard 66%, вы введете:
+
+    make clueboard/66/rev3:default
+
+Когда все закончится, вы должны увидеть большой лог, который заканчивается примерно так:
+
+```
+Linking: .build/clueboard_66_rev3_default.elf                                                       [OK]
+Creating load file for flashing: .build/clueboard_66_rev3_default.hex                               [OK]
+Copying clueboard_66_rev3_default.hex to qmk_firmware folder                                        [OK]
+Checking file size of clueboard_66_rev3_default.hex                                                 [OK]
+ * The firmware size is fine - 26356/28672 (2316 bytes free)
+```
+
+# Создаем вашу раскладку
+
+Теперь вы готовы создать свою персональную раскладку! Для этого перейдите к [Собираем вашу первую прошивку](ru-ru/newbs_building_firmware.md).

docs/translating.md

@@ -0,0 +1,29 @@
+# How to translate the QMK docs into different languages
+
+All files in the root folder (`docs/`) should be in English - all other languages should be in subfolders with the ISO 639-1 language codes, followed by `-` and the country code where relevant. [A list of common ones can be found here](https://www.andiamo.co.uk/resources/iso-language-codes/). If this folder doesn't exist, you may create it. Each of the translated files should have the same name as the English version, so things can fall back successfully.
+
+A `_summary.md` file should exist in this folder with a list of links to each file, with a translated name, and link preceded by the language folder:
+
+    * [QMK简介](zh-cn/getting_started_introduction.md)
+
+Once you've finished translating a new language, you'll also need to modify the following files:
+
+* [`docs/_langs.md`](https://github.com/qmk/qmk_firmware/blob/master/docs/_langs.md)  
+  Each line should contain a country flag in the format `:us:` followed by the name represented in its own language:  
+  
+      - [:cn: 中文](/zh-cn/)
+
+* [`docs/index.html`](https://github.com/qmk/qmk_firmware/blob/master/docs/index.html)  
+  Both `placeholder` and `noData` objects should have a dictionary entry for the language folder in a string:  
+  
+      '/zh-cn/': '没有结果!',
+
+## Previewing the translations
+
+Before opening a pull request, you can preview your additions if you have Python 3 installed by running this command in the `docs/` folder:
+
+    python -m http.server 9000
+
+and navigating to http://localhost:9000/ - you should be able to select your new language from the "Translations" menu at the top-right.
+
+Once you're happy with your work, feel free to open a pull request!

docs/understanding_qmk.md

@@ -22,7 +22,7 @@ This section of code is called "The Main Loop" because it's responsible for loop
     keyboard_task();
 ```
 
-This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
+This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216), and it is responsible for detecting changes in the matrix and turning status LEDs on and off.
 
 Within `keyboard_task()` you'll find code to handle:
 
@@ -30,7 +30,7 @@ Within `keyboard_task()` you'll find code to handle:
 * Mouse Handling
 * Serial Link(s)
 * Visualizer
-* Keyboard status LED's (Caps Lock, Num Lock, Scroll Lock)
+* Keyboard status LEDs (Caps Lock, Num Lock, Scroll Lock)
 
 #### Matrix Scanning
 
@@ -175,7 +175,7 @@ FIXME: This needs to be written
 
 FIXME: This needs to be written
 
-#### Keyboard state LED's (Caps Lock, Num Lock, Scroll Lock)
+#### Keyboard state LEDs (Caps Lock, Num Lock, Scroll Lock)
 
 FIXME: This needs to be written