Refactor qmk compile-json to qmk compile (#6592)

* RGB Inidcator example for new van pcbs

* simplify config.h

As per @drashna in CR

CODE_OF_CONDUCT.md

@@ -8,8 +8,17 @@ Our users, contributors, and collaborators are expected to treat each other with
 
 * The use of sexualized language or imagery
 * Unwelcome advances, sexual or otherwise
+* Deliberate intimidation, stalking, or following
 * Insults or derogatory comments, or personal or political attacks
 * Publishing others’ private information without explicit permission
+* Sustained disruption of talks or other events
 * Other conduct which could reasonably be considered inappropriate in a professional setting
+* Advocating for, or encouraging, any of the above behaviour
 
-If someone is violating this Code of Conduct you may email hello@qmk.fm to bring your concern to the Members. All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. 
+# Reporting
+
+If someone is violating this Code of Conduct, please email hello@qmk.fm or reach out to one of the Collaborators to bring it to our attention. All complaints will be reviewed and investigated.
+
+QMK will seek to use the least punitive means available to resolve an issue. If the circumstances require asking an offender to leave, we will do that.
+
+Reports will be taken and kept in strict confidence. You will not be required to confront an offender directly.

bin/qmk

@@ -38,7 +38,7 @@ with open('requirements.txt', 'r') as fd:
 
 # Figure out our version
 command = ['git', 'describe', '--abbrev=6', '--dirty', '--always', '--tags']
-result = subprocess.run(command, universal_newlines=True, capture_output=True)
+result = subprocess.run(command, universal_newlines=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
 
 if result.returncode == 0:
     os.environ['QMK_VERSION'] = 'QMK ' + result.stdout.strip()

docs/_summary.md

@@ -18,6 +18,7 @@
   * [Build/Compile QMK](faq_build.md)
   * [Debugging/Troubleshooting QMK](faq_debug.md)
   * [Keymap](faq_keymap.md)
+  * [Driver Installation with Zadig](driver_installation_zadig.md)
 
 * Detailed Guides
   * [Install Build Tools](getting_started_build_tools.md)

docs/cli.md

@@ -6,7 +6,8 @@ This page describes how to setup and use the QMK CLI.
 
 The QMK CLI makes building and working with QMK keyboards easier. We have provided a number of commands to help you work with QMK:
 
-* `qmk compile-json`
+* `qmk compile`
+* `qmk doctor`
 
 # Setup
 
@@ -20,12 +21,18 @@ You may want to add this to your `.profile`, `.bash_profile`, `.zsh_profile`, or
 
 # Commands
 
-## `qmk compile-json`
+## `qmk compile`
 
-This command allows you to compile JSON files you have downloaded from <https://config.qmk.fm>.
+This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm> or compile keymaps in the repo.
 
-**Usage**:
+**Usage for Configurator Exports**:
 
 ```
-qmk compile-json mine.json
+qmk compile <configuratorExport.json>
+```
+
+**Usage for Keymaps**:
+
+```
+qmk compile -kb <keyboard_name> -km <keymap_name>
 ```

docs/custom_quantum_functions.md

@@ -297,8 +297,8 @@ This runs code every time that the layers get changed.  This can be useful for l
 This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
-    switch (biton32(state)) {
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
     case _RAISE:
         rgblight_setrgb (0x00,  0x00, 0xFF);
         break;
@@ -320,8 +320,8 @@ uint32_t layer_state_set_user(uint32_t state) {
 ```
 ### `layer_state_set_*` Function Documentation
 
-* Keyboard/Revision: `uint32_t layer_state_set_kb(uint32_t state)`
-* Keymap: `uint32_t layer_state_set_user(uint32_t state)`
+* Keyboard/Revision: `layer_state_t layer_state_set_kb(layer_state_t state)`
+* Keymap: `layer_state_t layer_state_set_user(layer_state_t state)`
 
 
 The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)
@@ -377,8 +377,8 @@ void keyboard_post_init_user(void) {
 The above function will use the EEPROM config immediately after reading it, to set the default layer's RGB color. The "raw" value of it is converted in a usable structure based on the "union" that you created above. 
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
-    switch (biton32(state)) {
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
     case _RAISE:
         if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); }
         break;

docs/driver_installation_zadig.md

@@ -0,0 +1,42 @@
+# Bootloader Driver Installation with Zadig
+
+QMK presents itself to the host as a regular HID keyboard device, and as such requires no special drivers. However, in order to flash your keyboard on Windows, the bootloader device that appears when you reset the board often *does*.
+
+There are two notable exceptions: the Caterina bootloader, usually seen on Pro Micros, and the Halfkay bootloader shipped with PJRC Teensys, appear as a serial port and a generic HID device respectively, and so do not require a driver.
+
+We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have set up the development environment with Msys2 or WSL, the `qmk_install.sh` script will have asked if you want it to install the drivers for you.
+
+## Installation
+
+Place your keyboard into the bootloader mode, either by hitting the `RESET` keycode (which may be on a different layer), or by pressing the reset switch usually located on the underside of the board. If your keyboard has neither, try holding Escape, or Space+`B`, as you plug it in (see the [Bootmagic](feature_bootmagic.md) docs for more details).
+Some keyboards may have specific instructions for entering the bootloader, for example the [Bootmagic Lite](feature_bootmagic.md#bootmagic-lite) key (Escape) might be on a different key, such as Left Control. Refer to the board's README if you are unsure.
+
+Zadig will automatically detect the bootloader device. You may sometimes need to check **Options -> List All Devices**.
+ - For keyboards with Atmel AVR MCUs, the bootloader will be named something similar to `ATm32U4DFU`, and have a Vendor ID of `03EB`.
+ - USBasp bootloaders will appear as `USBasp`, with a VID/PID of `16C0:05DC`.
+ - AVR keyboards flashed with the QMK-DFU bootloader will be named `<keyboard name> Bootloader` and will also have the VID `03EB`.
+ - For most ARM keyboards, it will be called `STM32 BOOTLOADER`, and have a VID/PID of `0483:DF11`.
+
+!> If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is probably not in bootloader mode. The arrow will be colored orange and you will be asked to confirm modifying a system driver. **Do not** proceed if this is the case!
+
+If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list.
+
+![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png)
+
+Finally, unplug and replug the keyboard to make sure the new driver has been loaded. If you are using the QMK Toolbox to flash, exit and restart it too, as it can sometimes fail to recognize the driver change.
+
+## Recovering from Installation to Wrong Device
+
+If you find that you can no longer type with the keyboard, you may have installed the driver onto the keyboard itself instead of the bootloader. You can easily confirm this in Zadig - a healthy keyboard has the `HidUsb` driver installed on all of its interfaces:
+
+![A healthy keyboard as seen by Zadig](https://i.imgur.com/Hx0E5kC.png)
+
+Open the Device Manager and look for a device that looks like your keyboard.
+
+![The board with the wrong driver installed, in Device Manager](https://i.imgur.com/L3wvX8f.png)
+
+Right-click it and hit **Uninstall device**. Make sure to tick **Delete the driver software for this device** first.
+
+![The Device Uninstall dialog, with the "delete driver" checkbox ticked](https://i.imgur.com/aEs2RuA.png)
+
+Click **Action -> Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again!

docs/faq_build.md

@@ -75,14 +75,11 @@ Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices m
 
 ## Unknown Device for DFU Bootloader
 
-Issues encountered when flashing keyboards on Windows are most often due to having the wrong drivers installed for the bootloader. 
+Issues encountered when flashing keyboards on Windows are most often due to having the wrong drivers installed for the bootloader, or none at all.
 
-Re-running the installation script for MSYS2 may help (eg run `util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue. Alternatively, you can download and run the [`qmk_driver_installer`](https://github.com/qmk/qmk_driver_installer) package.
-
-If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, and run it on the system.  Then, you will need to reset your board into bootloader mode.  After that, locate the device in question. If the device doesn't show up in the list (or nothing shows up in the list), you may need to enable the `List all devices` option in the `Options` menu.
-
-From here, you will need to know what type of controller the board is using.  You may see it listed in the Device Manager as `ATmega32U4` device (which is an AVR board), or an `STM32` device (Which is an ARM board).  For AVR boards, use `libusb-win32` for the driver. For ARM boards, use the `WinUSB` driver.  Once the correct driver type has been selected, click on the `Replace Driver` button, unplug your board, plug it back in, and reset it again.
+Re-running the QMK installation script (`./util/qmk_install.sh` from the `qmk_firmware` directory in MSYS2 or WSL) or reinstalling the QMK Toolbox may fix the issue. Alternatively, you can download and run the [`qmk_driver_installer`](https://github.com/qmk/qmk_driver_installer) package manually.
 
+If that doesn't work, then you may need to download and run Zadig. See [Bootloader Driver Installation with Zadig](driver_installation_zadig.md) for more detailed information.
 
 ## WINAVR is Obsolete
 It is no longer recommended and may cause some problem.

docs/feature_audio.md

@@ -21,6 +21,8 @@ STARTUP_SONG // plays when the keyboard starts up (audio.c)
 GOODBYE_SONG // plays when you press the RESET key (quantum.c)
 AG_NORM_SONG // plays when you press AG_NORM (quantum.c)
 AG_SWAP_SONG // plays when you press AG_SWAP (quantum.c)
+CG_NORM_SONG // plays when you press CG_NORM (quantum.c)
+CG_SWAP_SONG // plays when you press CG_SWAP (quantum.c)
 MUSIC_ON_SONG // plays when music mode is activated (process_music.c)
 MUSIC_OFF_SONG // plays when music mode is deactivated (process_music.c)
 CHROMATIC_SONG // plays when the chromatic music mode is selected (process_music.c)

docs/feature_bootmagic.md

@@ -64,8 +64,11 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`MAGIC_NO_GUI`                    |         |Disable the GUI keys (useful when gaming) |
 |`MAGIC_UNNO_GUI`                  |         |Enable the GUI keys                       |
 |`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides (for macOS)|
-|`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Left Alt and Left GUI              |
-|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Left Alt and GUI swap              |
+|`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI                        |
+|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap                   |
+|`MAGIC_SWAP_CTL_GUI`              |`CG_SWAP`|Swap Ctrl and GUI on both sides (for macOS)|
+|`MAGIC_UNSWAP_CTL_GUI`            |`CG_NORM`|Unswap Ctrl and GUI                       |
+|`MAGIC_TOGGLE_CTL_GUI`            |`CG_TOGG`|Toggle Ctrl and GUI swap                  |
 |`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace                    |
 |`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace                  |
 |`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Left Control and Caps Lock           |
@@ -76,6 +79,10 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`MAGIC_UNSWAP_LALT_LGUI`          |         |Unswap Left Alt and Left GUI              |
 |`MAGIC_SWAP_RALT_RGUI`            |         |Swap Right Alt and Right GUI              |
 |`MAGIC_UNSWAP_RALT_RGUI`          |         |Unswap Right Alt and Right GUI            |
+|`MAGIC_SWAP_LCTL_LGUI`            |         |Swap Left Control and Left GUI            |
+|`MAGIC_UNSWAP_LCTL_LGUI`          |         |Unswap Left Control and Left GUI          |
+|`MAGIC_SWAP_RCTL_RGUI`            |         |Swap Right Control and Right GUI          |
+|`MAGIC_UNSWAP_RCTL_RGUI`          |         |Unswap Right Control and Right GUI        |
 
 ## Configuration
 

docs/feature_oled_driver.md

@@ -31,7 +31,7 @@ This enables the feature and the `OLED_DRIVER_ENABLE` define. Then in your `keym
 void oled_task_user(void) {
   // Host Keyboard Layer Status
   oled_write_P(PSTR("Layer: "), false);
-  switch (biton32(layer_state)) {
+  switch (get_highest_layer(layer_state)) {
     case _QWERTY:
       oled_write_P(PSTR("Default\n"), false);
       break;

docs/feature_userspace.md

@@ -115,11 +115,11 @@ For instance, let's look at the `layer_state_set_user()` function.  You can enab
 In your `<name.c>` file, you'd want to add this: 
 ```c
 __attribute__ ((weak))
-uint32_t layer_state_set_keymap (uint32_t state) {
+layer_state_t layer_state_set_keymap (layer_state_t state) {
   return state;
 }
 
-uint32_t layer_state_set_user (uint32_t state) {
+layer_state_t layer_state_set_user (layer_state_t state) {
   state = update_tri_layer_state(state, 2, 3, 5);
   return layer_state_set_keymap (state);
 }

docs/flashing.md

@@ -144,6 +144,36 @@ Flashing sequence:
 3. Flash a .hex file
 4. Reset the device into application mode (may be done automatically)
 
+## BootloadHID
+
+BootloadHID is a USB bootloader for AVR microcontrollers. The uploader tool requires no kernel level driver on Windows and can therefore be run without installing any DLLs.
+
+To ensure compatibility with the bootloadHID bootloader, make sure this block is present your `rules.mk`:
+
+    # Bootloader
+    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+    #     different sizes, comment this out, and the correct address will be loaded
+    #     automatically (+60). See bootloader.mk for all options.
+    BOOTLOADER = bootloadHID
+
+Compatible flashers:
+
+* [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash) (recommended Windows GUI)
+* [bootloadhid Command Line](https://www.obdev.at/products/vusb/bootloadhid.html) / `:BootloadHID` in QMK (recommended command line)
+
+Flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `RESET` keycode (may not work on all devices)
+    * Hold the salt key while plugging the keyboard in (usually documented within keyboard readme) 
+2. Wait for the OS to detect the device
+3. Flash a .hex file
+4. Reset the device into application mode (may be done automatically)
+
+or:
+
+    make <keyboard>:<keymap>:bootloadHID
+
 ## STM32
 
 All STM32 chips come preloaded with a factory bootloader that cannot be modified nor deleted. Some STM32 chips have bootloaders that do not come with USB programming (e.g. STM32F103) but the process is still the same.
@@ -171,7 +201,5 @@ Flashing sequence:
 
 There are a number of DFU commands that you can use to flash firmware to a STM32 device:
 
-* `:dfu-util` - The default command for flashing to STM32 devices. 
-* `:dfu-util-wait` - This works like the default command, but it gives you a (configurable) 10 second timeout before it attempts to flash the firmware.  You can use `TIME_DELAY=20` from the command line to change the timeout.
-   * Eg: `make <keyboard>:<keymap>:dfu-util TIME_DELAY=5`
-* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 
+* `:dfu-util` - The default command for flashing to STM32 devices.
+* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util.

docs/flashing_bootloadhid.md

@@ -0,0 +1,70 @@
+# BootloadHID Flashing Instructions and Bootloader Information
+
+ps2avr(GB) boards use an ATmega32A microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
+
+General flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `RESET` keycode (may not work on all devices)
+    * Hold the salt key while plugging the keyboard in (usually documented within keyboard readme) 
+2. Wait for the OS to detect the device
+3. Flash a .hex file
+4. Reset the device into application mode (may be done automatically)
+
+## bootloadHID Flashing Target
+
+Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
+
+To flash via the command line, use the target `:bootloadHID` by executing the following command:
+
+    make <keyboard>:<keymap>:bootloadHID
+
+## GUI Flashing
+
+### Windows
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Ensure the configured VendorID is `16c0` and ProductID is `05df`
+4. Press the `Find Device` button and ensure that your keyboard is found.
+5. Press the `Open .hex File` button and locate the `.hex` file you created.
+6. Press the `Flash Device` button and wait for the process to complete.
+
+## Command Line Flashing
+
+1. Place your keyboard into reset. 
+2. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
+
+### Windows Manual Installation
+For MSYS2:
+1. Download the BootloadHID firmware package from https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz.
+2. Extract contents using a compatible tool, for example 7-Zip.
+3. Add to the MSYS path by copying `commandline/bootloadHID.exe` from the extracted archive to your MSYS2 installation, typically `C:\msys64\usr\bin`.
+
+For native Windows flashing, the `bootloadHID.exe` can be used outside of the MSYS2 environment.
+
+### Linux Manual Installation
+1. Install libusb development dependency:
+    ```bash
+    # This depends on OS - for Debian the following works
+    sudo apt-get install libusb-dev
+    ```
+2. Download the BootloadHID firmware package:
+    ```
+    wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -O - | tar -xz -C /tmp
+    ```
+3. Build the bootloadHID executable:
+    ```
+    cd /tmp/bootloadHID.2012-12-08/commandline/
+    make
+    sudo cp bootloadHID /usr/local/bin
+    ```
+
+### MacOS Manual Installation
+1. Install Homebrew by typing the following:
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install the following packages:
+    ```
+    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+    ```

docs/getting_started_make_guide.md

@@ -14,7 +14,7 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
 * `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
-* `dfu`, `teensy`, `avrdude` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
+* `dfu`, `teensy`, `avrdude`, `dfu-util` or `bootloadHID`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
  * **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck/rev4:default:dfu`.
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.
 

docs/how_keyboards_work.md

@@ -33,7 +33,11 @@ The firmware does not send actual letters or characters, but only scancodes.
 Thus, by modifying the firmware, you can only modify what scancode is sent over
 USB for a given key.
 
-## 3. What the Operating System Does
+## 3. What the Event Input/Kernel Does
+
+The *scancode* is mapped to a *keycode* dependent on the keyboard [60-keyboard.hwdb at Master](https://github.com/systemd/systemd/blob/master/hwdb/60-keyboard.hwdb). Without this mapping, the operating system will not receive a valid keycode and will be unable to do anything useful with that key press.
+
+## 4. What the Operating System Does
 
 Once the keycode reaches the operating system, a piece of software has to have
 it match an actual character thanks to a keyboard layout. For example, if your

docs/keycodes.md

@@ -261,6 +261,8 @@ This is a reference only. Each group of keys links to the page documenting their
 |----------------------------------|---------|------------------------------------|
 |`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Caps Lock and Left Control     |
 |`MAGIC_CAPSLOCK_TO_CONTROL`       |         |Treat Caps Lock as Control          |
+|`MAGIC_SWAP_LCTL_LGUI`            |         |Swap Left Control and GUI           |
+|`MAGIC_SWAP_RCTL_RGUI`            |         |Swap Right Control and GUI          |
 |`MAGIC_SWAP_LALT_LGUI`            |         |Swap Left Alt and GUI               |
 |`MAGIC_SWAP_RALT_RGUI`            |         |Swap Right Alt and GUI              |
 |`MAGIC_NO_GUI`                    |         |Disable the GUI key                 |
@@ -268,8 +270,11 @@ This is a reference only. Each group of keys links to the page documenting their
 |`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace              |
 |`MAGIC_HOST_NKRO`                 |         |Force NKRO on                       |
 |`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides      |
+|`MAGIC_SWAP_CTL_GUI`              |`CG_SWAP`|Swap Ctrl and GUI on both sides (for macOS)|
 |`MAGIC_UNSWAP_CONTROL_CAPSLOCK`   |         |Unswap Caps Lock and Left Control   |
 |`MAGIC_UNCAPSLOCK_TO_CONTROL`     |         |Stop treating Caps Lock as Control  |
+|`MAGIC_UNSWAP_LCTL_LGUI`          |         |Unswap Left Control and GUI         |
+|`MAGIC_UNSWAP_RCTL_RGUI`          |         |Unswap Right Control and GUI        |
 |`MAGIC_UNSWAP_LALT_LGUI`          |         |Unswap Left Alt and GUI             |
 |`MAGIC_UNSWAP_RALT_RGUI`          |         |Unswap Right Alt and GUI            |
 |`MAGIC_UNNO_GUI`                  |         |Enable the GUI key                  |
@@ -277,8 +282,10 @@ This is a reference only. Each group of keys links to the page documenting their
 |`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace            |
 |`MAGIC_UNHOST_NKRO`               |         |Force NKRO off                      |
 |`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI on both sides    |
-|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap on both sides|
-|`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                 |
+|`MAGIC_UNSWAP_CTL_GUI`            |`CG_NORM`|Unswap Ctrl and GUI on both sides      |
+|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap on both sides  |
+|`MAGIC_TOGGLE_CTL_GUI`            |`CG_TOGG`|Toggle Ctrl and GUI swap on both sides |
+|`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                    |
 
 ## [Bluetooth](feature_bluetooth.md)
 

docs/newbs_flashing.md

@@ -248,6 +248,42 @@ Programming.....................................................................
 Booting
 ```
 
+## BootloadHID
+
+For Bootmapper Client(BMC)/bootloadHID/ATmega32A based boards, when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
+
+    make <my_keyboard>:<my_keymap>:bootloaderHID
+
+For example, if your keymap is named "xyverz" and you're building a keymap for a jj40, you'll use this command:
+
+    make jj40:xyverz:bootloaderHID
+
+Once the firmware finishes compiling, it will output something like this: 
+
+```
+Linking: .build/jj40_default.elf                                                                   [OK]
+Creating load file for flashing: .build/jj40_default.hex                                           [OK]
+Copying jj40_default.hex to qmk_firmware folder                                                    [OK]
+Checking file size of jj40_default.hex                                                             [OK]
+ * The firmware size is fine - 21920/28672 (6752 bytes free)
+```
+
+After it gets to this point, the build script will look for the DFU bootloader every 5 seconds.  It will repeat the following until the device is found or you cancel it. 
+
+```
+Error opening HIDBoot device: The specified device was not found
+Trying again in 5s.
+```
+
+Once it does this, you'll want to reset the controller.  It should then show output similar to this: 
+
+```
+Page size   = 128 (0x80)
+Device size = 32768 (0x8000); 30720 bytes remaining
+Uploading 22016 (0x5600) bytes starting at 0 (0x0)
+0x05580 ... 0x05600
+```
+
 ## STM32 (ARM)
 
 For a majority of ARM boards (including the Proton C, Planck Rev 6, and Preonic Rev 3), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 

docs/ref_functions.md

@@ -50,7 +50,7 @@ The caveat to this method is that you cannot access the `z` layer without having
 #### Example
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
+layer_state_t layer_state_set_user(layer_state_t state) {
   return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
 }
 ```
@@ -58,7 +58,7 @@ uint32_t layer_state_set_user(uint32_t state) {
 Alternatively, you don't have to immediately "return" the value.  This is useful if you want to add multiple tri layers, or if you want to add additional effects.
 
 ```c
-uint32_t layer_state_set_user(uint32_t state) {
+layer_state_t layer_state_set_user(layer_state_t state) {
   state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
   state = update_tri_layer_state(state, _RAISE, _SYMB, _SPECIAL);
   return state;

keyboards/4by3/4by3.c

@@ -0,0 +1 @@
+#include "4by3.h"

keyboards/4by3/4by3.h

@@ -0,0 +1,70 @@
+#pragma once
+
+#include "quantum.h"
+
+/* LAYOUT_horizontal
+ * ┌───┐
+ * │USB│
+ * ├───┼───┬───┬───┐
+ * │K00│K01│K02│K03│
+ * ├───┼───┼───┼───┤
+ * │K10│K11│K12│K13│
+ * ├───┼───┼───┼───┤
+ * │K20│K21│K22│K23│
+ * └───┴───┴───┴───┘
+ */
+#define LAYOUT_horizontal( \
+	K00, K01, K02, K03, \
+	K10, K11, K12, K13, \
+	K20, K21, K22, K23  \
+) { \
+	{ K00, K01, K02, K03 }, \
+	{ K10, K11, K12, K13 }, \
+	{ K20, K21, K22, K23 }  \
+}
+
+/* LAYOUT_vertical_right
+ * ┌───┬───┬───┬───┐
+ * │K00│K01│K03│USB│
+ * ├───┼───┼───┬───┘
+ * │K04│K05│K06│
+ * ├───┼───┼───┤
+ * │K07│K08│K09│
+ * ├───┼───┼───┤
+ * │K10│K11│K12│
+ * └───┴───┴───┘
+ */
+#define LAYOUT_vertical_right( \
+	K20, K10, K00, \
+    K21, K11, K01, \
+    K22, K12, K02, \
+    K23, K13, K03  \
+) { \
+	{ K00, K01, K02, K03 }, \
+	{ K10, K11, K12, K13 }, \
+	{ K20, K21, K22, K23 }  \
+}
+
+/* LAYOUT_vertical_left
+ *     ┌───┬───┬───┐
+ *     │K00│K01│K03│
+ *     ├───┼───┼───┤
+ *     │K04│K05│K06│
+ *     ├───┼───┼───┤
+ *     │K07│K08│K09│
+ * ┌───┼───┼───┼───┤
+ * │USB│K10│K11│K12│
+ * └───┴───┴───┴───┘
+ */
+#define LAYOUT_vertical_left( \
+	K03, K13, K23, \
+    K02, K12, K22, \
+    K01, K11, K21, \
+    K00, K10, K20  \
+) { \
+	{ K00, K01, K02, K03 }, \
+	{ K10, K11, K12, K13 }, \
+	{ K20, K21, K22, K23 }  \
+}
+
+#define LAYOUT LAYOUT_horizontal

keyboards/4by3/config.h

@@ -0,0 +1,26 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xEEEE
+#define PRODUCT_ID      0x2019
+#define DEVICE_VER		0x0001
+#define MANUFACTURER    Elias Sjögreen
+#define PRODUCT         4by3
+#define DESCRIPTION     A small 12 key keypad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D1, D0, D4 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5

keyboards/4by3/info.json

@@ -0,0 +1,41 @@
+{
+    "keyboard_name": "4by3",
+    "url": "https://github.com/eliassjogreen/4by3",
+    "maintainer": "eliassjogreen",
+    "width": 4,
+    "height": 3,
+    "layouts": {
+        "LAYOUT_horizontal": {
+            "key_count": 12,
+            "width": 4,
+            "height": 3,
+            "layout": [
+                { "x": 0, "y": 0 }, { "x": 1, "y": 0 }, { "x": 2, "y": 0 }, { "x": 3, "y": 0 },
+                { "x": 0, "y": 1 }, { "x": 1, "y": 1 }, { "x": 2, "y": 1 }, { "x": 3, "y": 1 },
+                { "x": 0, "y": 2 }, { "x": 1, "y": 2 }, { "x": 2, "y": 2 }, { "x": 3, "y": 2 }
+            ]
+        },
+        "LAYOUT_vertical_right": {
+            "key_count": 12,
+            "width": 3,
+            "height": 4,
+            "layout": [
+                { "x": 0, "y": 0 }, { "x": 1, "y": 0 }, { "x": 2, "y": 0 },
+                { "x": 0, "y": 1 }, { "x": 1, "y": 1 }, { "x": 2, "y": 1 },
+                { "x": 0, "y": 2 }, { "x": 1, "y": 2 }, { "x": 2, "y": 2 },
+                { "x": 0, "y": 3 }, { "x": 1, "y": 3 }, { "x": 2, "y": 3 }
+            ]
+        },
+        "LAYOUT_vertical_left": {
+            "key_count": 12,
+            "width": 3,
+            "height": 4,
+            "layout": [
+                { "x": 0, "y": 0 }, { "x": 1, "y": 0 }, { "x": 2, "y": 0 },
+                { "x": 0, "y": 1 }, { "x": 1, "y": 1 }, { "x": 2, "y": 1 },
+                { "x": 0, "y": 2 }, { "x": 1, "y": 2 }, { "x": 2, "y": 2 },
+                { "x": 0, "y": 3 }, { "x": 1, "y": 3 }, { "x": 2, "y": 3 }
+            ]
+        }
+    }
+}

keyboards/4by3/keymaps/arrowpad/keymap.c

@@ -0,0 +1,12 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Change 'LAYOUT_vertical_right' to 'LAYOUT_vertical_left'
+       to change the side where the pro micro usb port is. */
+    [0] = LAYOUT_vertical_right(
+		KC_INS  , KC_HOME , KC_PGUP ,
+        KC_DEL  , KC_END  , KC_PGDN ,
+        KC_PSCR , KC_UP   , KC_PAUS ,
+        KC_LEFT , KC_DOWN , KC_RGHT
+    )
+};

keyboards/4by3/keymaps/default/keymap.c

@@ -0,0 +1,9 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_horizontal(
+		KC_VOLU , _______ , _______ , _______ ,
+        KC_MUTE , KC_MPRV , KC_MPLY , KC_MNXT ,
+        KC_VOLD , _______ , _______ , _______
+    )
+};

keyboards/4by3/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default 4by3 keymap
+
+![The default 4by3 keymap](https://i.imgur.com/E4OlQAs.png)

keyboards/4by3/keymaps/funcpad_horizontal/keymap.c

@@ -0,0 +1,9 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_horizontal(
+		KC_F1   , KC_F2   , KC_F3   , KC_F4   ,
+		KC_F5   , KC_F6   , KC_F7   , KC_F8   ,
+		KC_F9   , KC_F10  , KC_F11  , KC_F12
+    )
+};

keyboards/4by3/keymaps/funcpad_vertical/keymap.c

@@ -0,0 +1,12 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Change 'LAYOUT_vertical_right' to 'LAYOUT_vertical_left'
+       to change the side where the pro micro usb port is. */
+	[0] = LAYOUT_vertical_right(
+		KC_F1   , KC_F2   , KC_F3   ,
+        KC_F4   , KC_F5   , KC_F6   ,
+        KC_F7   , KC_F8   , KC_F9   ,
+        KC_F10  , KC_F11  , KC_F12
+    )
+};

keyboards/4by3/keymaps/numpad_horizontal/keymap.c

@@ -0,0 +1,9 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_horizontal(
+		KC_P1   , KC_P2   , KC_P3   , KC_P4   ,
+		KC_P5   , KC_P6   , KC_P7   , KC_P8   ,
+		KC_P9   , KC_P0   , KC_BSPC , KC_ENT
+    ),
+};

keyboards/4by3/keymaps/numpad_vertical/keymap.c

@@ -0,0 +1,12 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Change 'LAYOUT_vertical_right' to 'LAYOUT_vertical_left'
+       to change the side where the pro micro usb port is. */
+	[0] = LAYOUT_vertical_right(
+		KC_P1   , KC_P2   , KC_P3   ,
+        KC_P4   , KC_P5   , KC_P6   ,
+        KC_P7   , KC_P8   , KC_P9   ,
+        KC_BSPC , KC_P0   , KC_ENT
+    ),
+};

keyboards/4by3/readme.md

@@ -0,0 +1,15 @@
+# 4by3
+
+![4by3](https://i.imgur.com/Ykb7evL.jpg)
+
+A 12 key mechanical keypad.
+
+Keyboard Maintainer: [eliassjogreen](https://github.com/eliassjogreen)  
+Hardware Supported: 4by3  
+Hardware Availability: [eliassjogreen/4by3](https://github.com/eliassjogreen/4by3)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 4by3:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/4by3/rules.mk

@@ -0,0 +1,8 @@
+MCU 				= atmega32u4
+BOOTLOADER 			= caterina
+
+EXTRAKEY_ENABLE 	= yes
+NKRO_ENABLE 		= yes
+CONSOLE_ENABLE		= yes
+COMMAND_ENABLE		= yes
+

keyboards/angel17/angel17.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "angel17.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/angel17/angel17.h

@@ -0,0 +1,40 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_numpad_5x4( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, \
+    k20, k21, k22, k13, \
+    k30, k31, k32, \
+    k40, k41, k33 \
+) \
+{ \
+    { k00, k10, k20, k31, k41 }, \
+    { k02, k12, k22, k33, KC_NO }, \
+    { k01, k11, k21, k32, KC_NO }, \
+    { k03, k13, k30, k40, KC_NO }, \
+}

keyboards/angel17/config.h

@@ -0,0 +1,249 @@
+/*
+Copyright 2019 kakunpc
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    kakunpc
+#define PRODUCT         angel17
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/angel17/info.json

@@ -0,0 +1,34 @@
+{
+    "keyboard_name": "angel17",
+    "url": "https://kakunpc.booth.pm/",
+    "maintainer": "kakunpc",
+    "width": 4,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_numpad_5x4": {
+            "layout": [
+                {"label":"Num Lock", "x":0, "y":0},
+                {"label":"/", "x":1, "y":0},
+                {"label":"*", "x":2, "y":0},
+                {"label":"-", "x":3, "y":0},
+
+                {"label":"7", "x":0, "y":1},
+                {"label":"8", "x":1, "y":1},
+                {"label":"9", "x":2, "y":1},
+
+                {"label":"4", "x":0, "y":2},
+                {"label":"5", "x":1, "y":2},
+                {"label":"6", "x":2, "y":2},
+                {"label":"+", "x":3, "y":1, "h":2},
+
+                {"label":"1", "x":0, "y":3},
+                {"label":"2", "x":1, "y":3},
+                {"label":"3", "x":2, "y":3},
+
+                {"label":"0", "x":0, "y":4, "w":2},
+                {"label":".", "x":2, "y":4},
+                {"label":"Enter", "x":3, "y":3, "h":2}
+            ]
+        }
+    }
+}

keyboards/angel17/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/angel17/keymaps/default/keymap.c

@@ -0,0 +1,42 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_numpad_5x4( /* Base */
+    KC_NLCK,  KC_PSLS,  KC_PAST, KC_PMNS,
+    KC_P7,    KC_P8,    KC_P9,
+    KC_P4,    KC_P5,    KC_P6,   KC_PPLS,
+    KC_P1,    KC_P2,    KC_P3,
+        KC_P0,    KC_PDOT,       KC_PENT
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/angel17/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for angel17

keyboards/angel17/readme.md

@@ -0,0 +1,15 @@
+# angel17
+
+![angel17](https://i.gyazo.com/30787446262c5818bc60e0ffb34c96ed.jpg)
+
+Keyboard for tablets.
+
+Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)  
+Hardware Supported: angel17_alpha, promicro  
+Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/))
+
+Make example for this keyboard (after setting up your build environment):
+
+    make angel17:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/angel17/rules.mk

@@ -0,0 +1,46 @@
+# MCU name
+MCU = atmega32u4
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = numpad_5x4

keyboards/bpiphany/pegasushoof/2013/2013.c

@@ -15,7 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "pegasushoof.h"
+#include "2013.h"
 
 
 extern inline void ph_caps_led_on(void);

keyboards/bpiphany/pegasushoof/2013/2013.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef PEGASUSHOOF_H
-#define PEGASUSHOOF_H
+#pragma once
 
 #include "matrix.h"
 #include "quantum.h"
@@ -56,21 +55,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     )
 
 #define LAYOUT_tkl_jis( \
-  KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,        KN5, KN7, KP7, \
-  KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO7, KO2,   KR4, KC4, KE4, \
-  KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2,             KQ4, KC5, KE5, \
-  KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO3, KO1,                       \
-  KB2, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KL0,      KB3,             KC6,      \
-  KP4, KD2, KN6, KG0,           KQ6,           KH0, KI0, KN0, KM0, KP1,        KC0, KQ0, KR0  \
-  ) { /*        00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
-     /* 0 */  { KC_NO,  KC_NO,  KC0,    KC_NO,  KC_NO,  KF0,    KG0,    KH0,    KI0,    KJ0,    KK0,    KL0,    KM0,    KN0,    KO0,    KC_NO,  KQ0,    KR0   }, \
-     /* 1 */  { KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KG1,    KH1,    KI1,    KJ1,    KK1,    KL1,    KM1,    KC_NO,  KO1,    KP1,    KC_NO,  KC_NO }, \
-     /* 2 */  { KC_NO,  KB2,    KC_NO,  KD2,    KC_NO,  KF2,    KG2,    KH2,    KI2,    KJ2,    KK2,    KL2,    KM2,    KC_NO,  KO2,    KC_NO,  KC_NO,  KC_NO }, \
-     /* 3 */  { KC_NO,  KB3,    KC_NO,  KC_NO,  KC_NO,  KF3,    KG3,    KH3,    KI3,    KJ3,    KK3,    KL3,    KM3,    KC_NO,  KO3,    KC_NO,  KC_NO,  KC_NO }, \
-     /* 4 */  { KC_NO,  KC_NO,  KC4,    KC_NO,  KE4,    KF4,    KG4,    KH4,    KI4,    KJ4,    KK4,    KL4,    KM4,    KC_NO,  KO4,    KP4,    KQ4,    KR4   }, \
-     /* 5 */  { KC_NO,  KC_NO,  KC5,    KC_NO,  KE5,    KF5,    KG5,    KH5,    KI5,    KJ5,    KK5,    KL5,    KM5,    KN5,    KO5,    KP5,    KC_NO,  KC_NO }, \
-     /* 6 */  { KC_NO,  KC_NO,  KC6,    KC_NO,  KC_NO,  KF6,    KG6,    KC_NO,  KI6,    KJ6,    KK6,    KL6,    KC_NO,  KN6,    KO6,    KC_NO,  KQ6,    KC_NO }, \
-     /* 7 */  { KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KF7,    KG7,    KH7,    KI7,    KJ7,    KK7,    KL7,    KK7,    KL7,    KO7,    KP7,    KC_NO,  KC_NO }  \
+    KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,        KN5, KN7, KP7, \
+    KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO7, KO2,   KR4, KC4, KE4, \
+    KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2,             KQ4, KC5, KE5, \
+    KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO3, KO1,                       \
+    KB2,      KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KL0, KB3,             KC6,      \
+    KP4, KD2, KN6, KG0,           KQ6,           KH0, KI0, KN0, KM0, KP1,        KC0, KQ0, KR0  \
+    ) { /*         00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
+        /* 0 */  { KC_NO,  KC_NO,  KC0,    KC_NO,  KC_NO,  KF0,    KG0,    KH0,    KI0,    KJ0,    KK0,    KL0,    KM0,    KN0,    KO0,    KC_NO,  KQ0,    KR0   }, \
+        /* 1 */  { KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KG1,    KH1,    KI1,    KJ1,    KK1,    KL1,    KM1,    KC_NO,  KO1,    KP1,    KC_NO,  KC_NO }, \
+        /* 2 */  { KC_NO,  KB2,    KC_NO,  KD2,    KC_NO,  KF2,    KG2,    KH2,    KI2,    KJ2,    KK2,    KL2,    KM2,    KC_NO,  KO2,    KC_NO,  KC_NO,  KC_NO }, \
+        /* 3 */  { KC_NO,  KB3,    KC_NO,  KC_NO,  KC_NO,  KF3,    KG3,    KH3,    KI3,    KJ3,    KK3,    KL3,    KM3,    KC_NO,  KO3,    KC_NO,  KC_NO,  KC_NO }, \
+        /* 4 */  { KC_NO,  KC_NO,  KC4,    KC_NO,  KE4,    KF4,    KG4,    KH4,    KI4,    KJ4,    KK4,    KL4,    KM4,    KC_NO,  KO4,    KP4,    KQ4,    KR4   }, \
+        /* 5 */  { KC_NO,  KC_NO,  KC5,    KC_NO,  KE5,    KF5,    KG5,    KH5,    KI5,    KJ5,    KK5,    KL5,    KM5,    KN5,    KO5,    KP5,    KC_NO,  KC_NO }, \
+        /* 6 */  { KC_NO,  KC_NO,  KC6,    KC_NO,  KC_NO,  KF6,    KG6,    KC_NO,  KI6,    KJ6,    KK6,    KL6,    KC_NO,  KN6,    KO6,    KC_NO,  KQ6,    KC_NO }, \
+        /* 7 */  { KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KF7,    KG7,    KH7,    KI7,    KJ7,    KK7,    KL7,    KK7,    KL7,    KO7,    KP7,    KC_NO,  KC_NO }  \
 }
 
 inline void ph_caps_led_on(void)  { DDRC |=  (1<<6); PORTC &= ~(1<<6); }
@@ -79,5 +78,3 @@ inline void ph_caps_led_off(void) { DDRC &= ~(1<<6); PORTC &= ~(1<<6); }
 inline void ph_sclk_led_on(void)  { DDRC |=  (1<<5); PORTC &= ~(1<<5); }
 inline void ph_sclk_led_off(void) { DDRC &= ~(1<<5); PORTC &= ~(1<<5); }
 
-
-#endif

keyboards/bpiphany/pegasushoof/2013/config.h

@@ -0,0 +1,37 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Filco
+#define PRODUCT         Majestouch TKL \\w The Pegasus Hoof 2013
+#define DESCRIPTION     QMK firmware for Majestouch TKL
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5

keyboards/bpiphany/pegasushoof/2013/rules.mk

@@ -0,0 +1,2 @@
+CUSTOM_MATRIX = yes
+SRC = matrix.c

keyboards/bpiphany/pegasushoof/2015/2015.c

@@ -0,0 +1,58 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "2015.h"
+
+
+extern inline void ph_caps_led_on(void);
+extern inline void ph_caps_led_off(void);
+
+extern inline void ph_sclk_led_on(void);
+extern inline void ph_sclk_led_off(void);
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+};
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+__attribute__ ((weak))
+bool process_action_user(keyrecord_t *record) {
+    return true;
+}
+
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+}
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	matrix_scan_user();
+}
+
+bool process_action_kb(keyrecord_t *record) {
+	return process_action_user(record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	led_set_user(usb_led);
+}

keyboards/bpiphany/pegasushoof/2015/2015.h

@@ -0,0 +1,82 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "matrix.h"
+#include "quantum.h"
+
+#define  ___ XXXXXXX
+
+#define LAYOUT( \
+    KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5, \
+    KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4, \
+    KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7, \
+    KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                  \
+    KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,      \
+    KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0  \
+    ) { /*         00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
+        /* 0 */  { ___ , KB0 , KC0 , KD0 , ___ , KF0 , KG0 , ___ , ___ , ___ , KK0 , KL0 , ___ , ___ , KO0 , ___ , ___ , KR0 }, \
+        /* 1 */  { KA1 , KB1 , ___ , KD1 , KE1 , KF1 , KG1 , KH1 , KI1 , KJ1 , ___ , ___ , ___ , ___ , ___ , ___ , ___ , ___ }, \
+        /* 2 */  { ___ , KB2 , ___ , KD2 , KE2 , KF2 , KG2 , KH2 , KI2 , KJ2 , ___ , ___ , ___ , KN2 , ___ , KP2 , ___ , KR2 }, \
+        /* 3 */  { ___ , KB3 , ___ , KD3 , KE3 , KF3 , KG3 , KH3 , KI3 , KJ3 , ___ , ___ , KM3 , KN3 , ___ , ___ , ___ , KR3 }, \
+        /* 4 */  { KA4 , KB4 , ___ , KD4 , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , ___ , ___ , KO4 , ___ , KQ4 , KR4 }, \
+        /* 5 */  { KA5 , ___ , KC5 , KD5 , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , ___ , ___ , ___ , ___ , ___ , ___ , ___ , KR5 }, \
+        /* 6 */  { ___ , KB6 , KC6 , ___ , KE6 , KF6 , KG6 , KH6 , KI6 , KJ6 , KK6 , ___ , ___ , ___ , KO6 , ___ , ___ , KR6 }, \
+        /* 7 */  { KA7 , KB7 , KC7 , KD7 , KE7 , KF7 , KG7 , KH7 , KI7 , KJ7 , ___ , ___ , ___ , ___ , KO7 , ___ , KQ7 , KR7 }  \
+    }
+
+#define LAYOUT_tkl_ansi( \
+    KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5, \
+    KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4, \
+    KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7, \
+    KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                  \
+    KN2,      KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,      \
+    KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0  \
+    ) LAYOUT( \
+        KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5, \
+        KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4, \
+        KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7, \
+        KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                  \
+        KN2,KC_NO,KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,      \
+        KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0  \
+    )
+
+#define LAYOUT_tkl_jis( \
+    KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,        KC7, KC5, KA5, \
+    KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB5, KB2,   KL4, KO4, KQ4, \
+    KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2,             KK4, KO7, KQ7, \
+    KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB3, KB1,                       \
+    KN2,      KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KE0, KN3,             KO6,      \
+    KA4, KP2, KC6, KJ0,           KK6,           KI0, KH0, KC0, KD0, KA1,        KO0, KK0, KL0  \
+    ) { /*         00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
+        /* 0 */  { ___ , KB0 , KC0 , KD0 , KE0 , KF0 , KG0 , KH0 , KI0 , KJ0 , KK0 , KL0 , ___ , ___ , KO0 , ___ , ___ , KR0 }, \
+        /* 1 */  { KA1 , KB1 , ___ , KD1 , KE1 , KF1 , KG1 , KH1 , KI1 , KJ1 , ___ , ___ , ___ , ___ , ___ , ___ , ___ ,     }, \
+        /* 2 */  { ___ , KB2 , ___ , KD2 , KE2 , KF2 , KG2 , KH2 , KI2 , KJ2 , ___ , ___ , ___ , KN2 , ___ , KP2 , ___ , KR2 }, \
+        /* 3 */  { ___ , KB3 , ___ , KD3 , KE3 , KF3 , KG3 , KH3 , KI3 , KJ3 , ___ , ___ , ___ , KN3 , ___ , ___ , ___ , KR3 }, \
+        /* 4 */  { KA4 , KB4 , ___ , KD4 , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , ___ , ___ , KO4 , ___ , KQ4 , KR4 }, \
+        /* 5 */  { KA5 , KB5 , KC5 , KD5 , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , ___ , ___ , ___ , ___ , ___ , ___ , ___ , KR5 }, \
+        /* 6 */  { ___ , KB6 , KC6 , ___ , KE6 , KF6 , KG6 , KH6 , ___ , KJ6 , KK6 , ___ , ___ , ___ , KO6 , ___ , ___ , KR6 }, \
+        /* 7 */  { KA7 , KB7 , KC7 , KD7 , KE7 , KF7 , KG7 , KH7 , KI7 , KJ7 , ___ , ___ , ___ , ___ , KO7 , ___ , KQ7 , KR7 }  \
+}
+
+inline void ph_caps_led_on(void)  { DDRC |=  (1<<6); PORTC &= ~(1<<6); }
+inline void ph_caps_led_off(void) { DDRC &= ~(1<<6); PORTC &= ~(1<<6); }
+
+inline void ph_sclk_led_on(void)  { DDRC |=  (1<<5); PORTC &= ~(1<<5); }
+inline void ph_sclk_led_off(void) { DDRC &= ~(1<<5); PORTC &= ~(1<<5); }
+

keyboards/bpiphany/pegasushoof/2015/config.h

@@ -0,0 +1,38 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Filco
+#define PRODUCT         Majestouch TKL \\w The Pegasus Hoof 2015
+#define DESCRIPTION     QMK firmware for Majestouch TKL
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+

keyboards/bpiphany/pegasushoof/2015/matrix.c

@@ -0,0 +1,146 @@
+/*
+  Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+  Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "debounce.h"
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void select_row(uint8_t col);
+
+inline uint8_t matrix_rows(void)
+{
+  return MATRIX_ROWS;
+}
+
+inline uint8_t matrix_cols(void)
+{
+  return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+  /* Column output pins */
+  DDRD  |=  0b01111011;
+  /* Row input pins */
+  DDRC  &= ~0b10000000;
+  DDRB  &= ~0b01111111;
+  PORTC |=  0b10000000;
+  PORTB |=  0b01111111;
+
+  for (uint8_t i=0; i < matrix_rows(); i++)  {
+    matrix[i] = 0;
+    matrix_debouncing[i] = 0;
+  }
+
+  matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+  bool changed = false;
+  for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+    select_row(col);
+    wait_us(30);
+    matrix_row_t rows = read_cols();
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+      bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+      bool curr_bit = rows & (1<<row);
+      if ((changed |= prev_bit != curr_bit)) {
+	    matrix_debouncing[row] ^= (matrix_row_t) 1 << col;
+      }
+    }
+  }
+
+  debounce(matrix_debouncing, matrix, matrix_rows(), changed);
+  matrix_scan_quantum();
+
+  return (uint8_t)changed;
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+  return matrix[row];
+}
+
+void matrix_print(void)
+{
+  print("\nr/c 0123456789ABCDEF\n");
+  for (uint8_t row = 0; row < matrix_rows(); row++) {
+    phex(row); print(": ");
+    pbin_reverse16(matrix_get_row(row));
+    print("\n");
+  }
+}
+
+uint8_t matrix_key_count(void)
+{
+  uint8_t count = 0;
+  for (uint8_t i = 0; i < matrix_rows(); i++) {
+    count += bitpop16(matrix_get_row(i));
+  }
+  return count;
+}
+
+static matrix_row_t read_cols(void)
+{
+  return
+    (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<0)) |
+    (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<1)) |
+    (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) |
+    (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<3)) |
+    (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) |
+    (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<5)) |
+    (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<6)) |
+    (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<7));
+}
+
+static void select_row(uint8_t col)
+{
+  switch (col) {
+  case  0: PORTD = (PORTD & ~0b01111011) | 0b00011011; break;
+  case  1: PORTD = (PORTD & ~0b01111011) | 0b01000011; break;
+  case  2: PORTD = (PORTD & ~0b01111011) | 0b01100000; break;
+  case  3: PORTD = (PORTD & ~0b01111011) | 0b01111001; break;
+  case  4: PORTD = (PORTD & ~0b01111011) | 0b01100010; break;
+  case  5: PORTD = (PORTD & ~0b01111011) | 0b01101010; break;
+  case  6: PORTD = (PORTD & ~0b01111011) | 0b01110001; break;
+  case  7: PORTD = (PORTD & ~0b01111011) | 0b01101001; break;
+  case  8: PORTD = (PORTD & ~0b01111011) | 0b01100001; break;
+  case  9: PORTD = (PORTD & ~0b01111011) | 0b01111000; break;
+  case 10: PORTD = (PORTD & ~0b01111011) | 0b00100011; break;
+  case 11: PORTD = (PORTD & ~0b01111011) | 0b00101011; break;
+  case 12: PORTD = (PORTD & ~0b01111011) | 0b00110011; break;
+  case 13: PORTD = (PORTD & ~0b01111011) | 0b01110000; break;
+  case 14: PORTD = (PORTD & ~0b01111011) | 0b00010011; break;
+  case 15: PORTD = (PORTD & ~0b01111011) | 0b01101000; break;
+  case 16: PORTD = (PORTD & ~0b01111011) | 0b00001011; break;
+  case 17: PORTD = (PORTD & ~0b01111011) | 0b00111011; break;
+  }
+}

keyboards/bpiphany/pegasushoof/2015/rules.mk

@@ -0,0 +1,2 @@
+CUSTOM_MATRIX = yes
+SRC = matrix.c

keyboards/bpiphany/pegasushoof/config.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,27 +15,6 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6050
-#define DEVICE_VER      0x0104
-#define MANUFACTURER    Filco
-#define PRODUCT         Majestouch TKL \\w The Pegasus Hoof
-#define DESCRIPTION     QMK firmware for Majestouch TKL
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 18
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-#endif

keyboards/bpiphany/pegasushoof/readme.md

@@ -3,7 +3,7 @@
 A replacement controller that turns your Filco Majestouch 87/88 mechanical keyboard into a fully programmable keyboard.
 
 Keyboard Maintainer: QMK Community  
-Hardware Supported: Pegasus Hoof  
+Hardware Supported: Pegasus Hoof, revisions [20131001](2013/) and [20150108](2015/)  
 Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/controllers/filco-pegasus-hoof-controller/)
 
 Make example for this keyboard (after setting up your build environment):
@@ -11,3 +11,11 @@ Make example for this keyboard (after setting up your build environment):
     make bpiphany/pegasus_hoof:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+### Additional Resources
+
+With many thanks to Bathroom Epiphanies for all the kind advice and help.
+
+ * [Schematic](https://deskthority.net/wiki/Costar_replacement_controllers#Schematic)
+ * [bpiphany TMK source](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard)
+ * [bpiphany QMK source](https://github.com/BathroomEpiphanies/epiphanies_qmk_keyboard)

keyboards/bpiphany/pegasushoof/rules.mk

@@ -64,5 +64,4 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 
 LAYOUTS = tkl_ansi
 
-CUSTOM_MATRIX = yes
-SRC = matrix.c
+DEFAULT_FOLDER=bpiphany/pegasushoof/2013

keyboards/clueboard/card/rules.mk

@@ -19,3 +19,5 @@ MIDI_ENABLE = no           # MIDI controls
 UNICODE_ENABLE = no        # Unicode
 BLUETOOTH_ENABLE = no      # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = yes         # Audio output on port C6
+
+LINK_TIME_OPTIMIZATION_ENABLE = yes

keyboards/diverge3/.gitignore

@@ -1 +0,0 @@
-.vscode

keyboards/diverge3/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -59,6 +58,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* serial.c configuration for split keyboard */
 #define SOFT_SERIAL_PIN D0
 
+#ifndef SELECT_SOFT_SERIAL_SPEED
+#define SELECT_SOFT_SERIAL_SPEED 3
+#endif
+
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
@@ -181,5 +184,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-#endif

keyboards/ergodox_ez/config.h

@@ -85,6 +85,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBW 1
 
+#define RGBLIGHT_SLEEP
+
 /*
  * The debounce filtering reports a key/switch change directly,
  * without any extra delay. After that the debounce logic will filter
@@ -109,6 +111,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DRIVER_2_LED_TOTAL 24
 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 
+#define RGB_MATRIX_LED_PROCESS_LIMIT 5
+#define RGB_MATRIX_LED_FLUSH_LIMIT 26
+
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+
 // #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF
 /* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */
 /* #define RGBLIGHT_COLOR_LAYER_2 0xFF, 0x00, 0x00 */

keyboards/ergodox_ez/ergodox_ez.c

@@ -22,6 +22,8 @@ extern inline void ergodox_right_led_set(uint8_t led, uint8_t n);
 
 extern inline void ergodox_led_all_set(uint8_t n);
 
+keyboard_config_t keyboard_config;
+
 bool i2c_initialized = 0;
 i2c_status_t mcp23018_status = 0x20;
 
@@ -43,6 +45,16 @@ void matrix_init_kb(void) {
     PORTD |=  (1<<5 | 1<<4);
     PORTE |=  (1<<6);
 
+    keyboard_config.raw = eeconfig_read_kb();
+    ergodox_led_all_set((uint8_t)keyboard_config.led_level * 255 / 4 );
+#ifdef RGB_MATRIX_ENABLE
+    if (keyboard_config.rgb_matrix_enable) {
+        rgb_matrix_set_flags(LED_FLAG_ALL);
+    } else {
+        rgb_matrix_set_flags(LED_FLAG_NONE);
+    }
+#endif
+
     ergodox_blink_all_leds();
 
     matrix_init_user();
@@ -305,6 +317,7 @@ led_config_t g_led_config = { {
 } };
 
 void suspend_power_down_kb(void) {
+    rgb_matrix_set_color_all(0, 0, 0);
     rgb_matrix_set_suspend_state(true);
     suspend_power_down_user();
 }
@@ -314,4 +327,65 @@ void suspend_power_down_kb(void) {
     suspend_wakeup_init_user();
 }
 
+#ifdef ORYX_CONFIGURATOR
+void keyboard_post_init_kb(void) {
+    rgb_matrix_enable_noeeprom();
+    keyboard_post_init_user();
+}
 #endif
+#endif
+
+#ifdef ORYX_CONFIGURATOR
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LED_LEVEL:
+            if (record->event.pressed) {
+                 keyboard_config.led_level++;
+                 if (keyboard_config.led_level > 4) {
+                    keyboard_config.led_level = 0;
+                 }
+                 ergodox_led_all_set((uint8_t)keyboard_config.led_level * 255 / 4 );
+                 eeconfig_update_kb(keyboard_config.raw);
+                 layer_state_set_kb(layer_state);
+            }
+            break;
+#ifdef RGB_MATRIX_ENABLE
+        case TOGGLE_LAYER_COLOR:
+            if (record->event.pressed) {
+                keyboard_config.disable_layer_led ^= 1;
+                if (keyboard_config.disable_layer_led)
+                    rgb_matrix_set_color_all(0, 0, 0);
+                eeconfig_update_kb(keyboard_config.raw);
+            }
+            break;
+        case RGB_TOG:
+            if (record->event.pressed) {
+              switch (rgb_matrix_get_flags()) {
+                case LED_FLAG_ALL: {
+                    rgb_matrix_set_flags(LED_FLAG_NONE);
+                    keyboard_config.rgb_matrix_enable = false;
+                    rgb_matrix_set_color_all(0, 0, 0);
+                  }
+                  break;
+                default: {
+                    rgb_matrix_set_flags(LED_FLAG_ALL);
+                    keyboard_config.rgb_matrix_enable = true;
+                  }
+                  break;
+              }
+              eeconfig_update_kb(keyboard_config.raw);
+            }
+            return false;
+#endif
+    }
+    return process_record_user(keycode, record);
+}
+#endif
+
+void eeconfig_init_kb(void) {  // EEPROM is getting reset!
+    keyboard_config.raw = 0;
+    keyboard_config.led_level = 4;
+    keyboard_config.rgb_matrix_enable = true;
+    eeconfig_update_kb(keyboard_config.raw);
+    eeconfig_init_user();
+}

keyboards/ergodox_ez/ergodox_ez.h

@@ -107,6 +107,25 @@ inline void ergodox_led_all_set(uint8_t n)
     ergodox_right_led_3_set(n);
 }
 
+#ifdef ORYX_CONFIGURATOR
+enum ergodox_ez_keycodes {
+    LED_LEVEL = SAFE_RANGE,
+    TOGGLE_LAYER_COLOR,
+    EZ_SAFE_RANGE,
+};
+#endif
+
+typedef union {
+  uint32_t raw;
+  struct {
+    uint8_t    led_level :3;
+    bool       disable_layer_led   :1;
+    bool       rgb_matrix_enable   :1;
+  };
+} keyboard_config_t;
+
+extern keyboard_config_t keyboard_config;
+
 /*
  *   LEFT HAND: LINES 115-122
  *  RIGHT HAND: LINES 124-131

keyboards/ergodox_ez/keymaps/default/keymap.c

@@ -6,7 +6,11 @@
 #define MDIA 2 // media keys
 
 enum custom_keycodes {
+#ifdef ORYX_CONFIGURATOR
+  EPRM = EZ_SAFE_RANGE,
+#else
   EPRM = SAFE_RANGE,
+#endif
   VRSN,
   RGB_SLD
 };
@@ -164,7 +168,7 @@ void matrix_init_user(void) {
 };
 
 // Runs whenever there is a layer state change.
-uint32_t layer_state_set_user(uint32_t state) {
+layer_state_t layer_state_set_user(layer_state_t state) {
   ergodox_board_led_off();
   ergodox_right_led_1_off();
   ergodox_right_led_2_off();

keyboards/eve/meteor/config.h

@@ -0,0 +1,38 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+#define MANUFACTURER    EVE
+#define PRODUCT         Meteor
+
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 15
+
+//                        0   1   2   3   4   5   6   7   8   9   A   B   C   D   E
+#define MATRIX_ROW_PINS { B5, B0, B1, B2, B3, B4 }
+#define MATRIX_COL_PINS { C2, C3, C4, C5, C6, C7, A7, A6, A5, A4, A3, A2, A1, A0, D7}
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCE 5
+
+#define BACKLIGHT_LEVELS 1

keyboards/eve/meteor/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "EVE Meteor", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 15, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5}, {"x":11, "y":5.5}, {"x":12, "y":5.5}, {"x":13, "y":5.5}, {"x":14, "y":5.5}]
+        },
+
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5, "w":1.75}, {"x":13, "y":4.5}, {"x":14, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5}, {"x":11, "y":5.5}, {"x":12, "y":5.5}, {"x":13, "y":5.5}, {"x":14, "y":5.5}]
+        }
+    }
+}

keyboards/eve/meteor/keymaps/default/keymap.c

@@ -0,0 +1,38 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3, KC_F4, KC_F5, KC_F6,  KC_F7, KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,
+    KC_GRV,  KC_1,    KC_2,    KC_3,  KC_4,  KC_5,  KC_6,   KC_7,  KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,  KC_R,  KC_T,  KC_Y,   KC_U,  KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,  KC_F,  KC_G,  KC_H,   KC_J,  KC_K,    KC_L,   KC_SCLN, KC_QUOT,          KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,  KC_V,  KC_B,  KC_N,   KC_M,  KC_COMM, KC_DOT, KC_RSFT,          KC_UP,   MO(1),
+    KC_LCTL, KC_LGUI, KC_LALT,                      KC_SPC,                         KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT
+  ),
+
+  [1] = LAYOUT(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  )
+};

keyboards/eve/meteor/meteor.c

@@ -0,0 +1,89 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "i2c_master.h"
+#include "quantum.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+extern rgblight_config_t rgblight_config;
+
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+            led[i].r = 0;
+            led[i].g = 0;
+            led[i].b = 0;
+        }
+    }
+
+    i2c_init();
+    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+}
+#endif
+
+void matrix_init_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+    if (rgblight_config.enable) {
+        i2c_init();
+        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+    }
+#endif
+    // call user level keymaps, if any
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_task();
+#endif
+    matrix_scan_user();
+    /* Nothing else for now. */
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void backlight_init_ports(void) {
+    // initialize pins D0, D1, D4 and D6 as output
+    setPinOutput(D0);
+    setPinOutput(D1);
+    setPinOutput(D4);
+    setPinOutput(D6);
+
+    // turn backlight LEDs on
+    writePinHigh(D0);
+    writePinHigh(D1);
+    writePinHigh(D4);
+    writePinHigh(D6);
+}
+
+void backlight_set(uint8_t level) {
+	if (level == 0) {
+        // turn backlight LEDs off
+        writePinLow(D0);
+        writePinLow(D1);
+        writePinLow(D4);
+        writePinLow(D6);
+	} else {
+        // turn backlight LEDs on
+        writePinHigh(D0);
+        writePinHigh(D1);
+        writePinHigh(D4);
+        writePinHigh(D6);
+	}
+}

keyboards/eve/meteor/meteor.h

@@ -0,0 +1,54 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_all( \
+  k00, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D,           \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,      \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,           \
+  k40, k53, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4D,      \
+  k50, k51, k52, k55, k59, k5A, k5B, k5C, k5D                                \
+){ \
+  { k00, KC_NO, k02, k03, k04,   k05, k06,   k07,   k08,   k09, k0A, k0B, k0C,   k0D,   KC_NO  }, \
+  { k10, k11,   k12, k13, k14,   k15, k16,   k17,   k18,   k19, k1A, k1B, k1C,   k1D,   k1E    }, \
+  { k20, k21,   k22, k23, k24,   k25, k26,   k27,   k28,   k29, k2A, k2B, k2C,   k2D,   KC_NO  }, \
+  { k30, k31,   k32, k33, k34,   k35, k36,   k37,   k38,   k39, k3A, k3B, k3C,   KC_NO, KC_NO  }, \
+  { k40, k41,   k42, k43, k44,   k45, k46,   k47,   k48,   k49, k4A, k4B, KC_NO, k4D,   KC_NO  }, \
+  { k50, k51,   k52, k53, KC_NO, k55, KC_NO, KC_NO, KC_NO, k59, k5A, k5B, k5C,   k5D,   KC_NO  }, \
+}
+
+#define LAYOUT( \
+  k00, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D,      \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,      \
+  k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4D,      \
+  k50, k51, k52, k55, k59, k5A, k5B, k5C, k5D                           \
+){ \
+  { k00, KC_NO, k02, k03,   k04,   k05, k06,   k07,   k08,   k09, k0A, k0B, k0C,   k0D,   KC_NO  }, \
+  { k10, k11,   k12, k13,   k14,   k15, k16,   k17,   k18,   k19, k1A, k1B, k1C,   k1D,   KC_NO  }, \
+  { k20, k21,   k22, k23,   k24,   k25, k26,   k27,   k28,   k29, k2A, k2B, k2C,   k2D,   KC_NO  }, \
+  { k30, k31,   k32, k33,   k34,   k35, k36,   k37,   k38,   k39, k3A, k3B, k3C,   KC_NO, KC_NO  }, \
+  { k40, k41,   k42, k43,   k44,   k45, k46,   k47,   k48,   k49, k4A, k4B, KC_NO, k4D,   KC_NO  }, \
+  { k50, k51,   k52, KC_NO, KC_NO, k55, KC_NO, KC_NO, KC_NO, k59, k5A, k5B, k5C,   k5D,   KC_NO  }, \
+}

keyboards/eve/meteor/readme.md

@@ -0,0 +1,51 @@
+# EVE Meteor
+
+60% PCB with Function Row
+
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: EVE Meteor    
+Hardware Availability: [zFrontier](https://en.zfrontier.com/products/eve-meteor)  
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make eve/meteor:default
+
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+**Reset Key:** Short the two holes labeled `FW_JP` underneath the PCB, beside the Tab key while plugging in the keyboard. 
+
+Do not confuse this with the LED holes of the switch in the `Tab` position. `FW_JP` is not reachable from the top as the plate blocks access to it. 
+
+It is recommended to program a `RESET` key in your keymap.   
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python3
+    pip3 install pyusb
+    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+    ```
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/eve/meteor/rules.mk

@@ -0,0 +1,37 @@
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
+# build options
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = no
+RGBLIGHT_CUSTOM_DRIVER = no
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+QUANTUM_LIB_SRC = i2c_master.c

keyboards/eve/meteor/usbconfig.h

@@ -0,0 +1,383 @@
+#pragma once
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME_LEN 13
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect

keyboards/jj40/keymaps/stevexyz/config.h

@@ -0,0 +1,45 @@
+
+// Behaviors That Can Be Configured
+
+#define TAPPING_TERM 250
+        // how long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too
+
+#define PERMISSIVE_HOLD
+       // makes tap and hold keys trigger the hold if another key is pressed before releasing, even if it hasn't hit the TAPPING_TERM
+#define IGNORE_MOD_TAP_INTERRUPT
+        // makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the TAPPING_TERM for both keys.
+
+/*
+    #define TAPPING_TERM_PER_KEY
+        // enables handling for per key TAPPING_TERM settings
+    #define RETRO_TAPPING
+        // tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release
+        // See Retro Tapping for details
+    #define TAPPING_TOGGLE 2
+        // how many taps before triggering the toggle
+    #define TAPPING_FORCE_HOLD
+        // makes it possible to use a dual role key as modifier shortly after having been tapped
+        // See Hold after tap
+        // Breaks any Tap Toggle functionality (TT or the One Shot Tap Toggle)
+    #define LEADER_TIMEOUT 300
+        // how long before the leader key times out
+        // If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the LEADER_PER_KEY_TIMING option, which resets the timeout after each key is tapped.
+    #define LEADER_PER_KEY_TIMING
+        // sets the timer for leader key chords to run on each key press rather than overall
+    #define LEADER_KEY_STRICT_KEY_PROCESSING
+        // Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify MT(MOD_CTL, KC_A) if you want to use KC_A.
+    #define ONESHOT_TIMEOUT 300
+        // how long before oneshot times out
+    #define ONESHOT_TAP_TOGGLE 2
+        // how many taps before oneshot toggle is triggered
+    #define QMK_KEYS_PER_SCAN 4
+        // Allows sending more than one key per scan. By default, only one key event gets sent via process_record() per scan. This has little impact on most typing, but if you're doing a lot of chords, or your scan rate is slow to begin with, you can have some delay in processing key events. Each press and release is a separate event. For a keyboard with 1ms or so scan times, even a very fast typist isn't going to produce the 500 keystrokes a second needed to actually get more than a few ms of delay from this. But if you're doing chording on something with 3-4ms scan times? You probably want this.
+    #define COMBO_COUNT 2
+        // Set this to the number of combos that you're using in the Combo feature.
+    #define COMBO_TERM 200
+        // how long for the Combo keys to be detected. Defaults to TAPPING_TERM if not defined.
+    #define TAP_CODE_DELAY 100
+        // Sets the delay between register_code and unregister_code, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
+    #define TAP_HOLD_CAPS_DELAY 80
+        // Sets the delay for Tap Hold keys (LT, MT) when using KC_CAPSLOCK keycode, as this has some special handling on MacOS. The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher.
+*/

keyboards/jj40/keymaps/stevexyz/keyboard-layout-editor-raw-data.txt

@@ -0,0 +1,4 @@
+[{c:"#eeddcc",g:true,a:7},"","","","","","","","","","","",""],
+["",{c:"#cccccc",g:false,a:4,fa:[2,1,5,5,8]},"F11\nF1\n!\n1\nQ","F12\nF2\n@\n2\nW","Layer Num\nF3\n#\n3\nE","Layer Light\nF4\n$\n4\nR","\nF5\n%\n5\nT","\nF6\n^\n6\nY","\nF7\n&\n7\nU","\nF8\n*\n8\nI","Layer Mouse\nF9\n(\n9\nO","\nF10\n)\n0\nP",{c:"#eeddcc",g:true,a:7},""],
+["",{c:"#cccccc",t:"#000000\n\n\n\n\n\n\n\n\n\n#804020",g:false,a:4,fa:[2,1,5,5,8,0,2,2,0,0,1]},"Caps\n\n\n\nA\n\nEsc\nTab\n\n\nshift",{fa:[2,2,5,5,8,0,2,2,0,0,1]},"<i class='fa fa-volume-off'></i>\n<i class='fa fa-angle-double-left'></i>\n~\n`\nS\n\n\n\n\n\nfn","<i class='fa fa-volume-down'></i>\n<i class='fa fa-angle-double-down'></i>\n_\n-\nD\n\n\n\n\n\nnum",{t:"#000000"},"<i class='fa fa-volume-up'></i>\n<i class='fa fa-angle-double-up'></i>\n+\n=\nF",{t:"#000000\n\n\n\n\n\n\n\n\n\n#804020"},"<i class='fa fa-play'></i>\n<i class='fa fa-angle-double-right'></i>\n{\n[\nG\n\n\n\n\n\n<i class='fa fa-apple'></i>","<i class='fa fa-step-forward'></i>\n<i class='fa fa-arrow-left'></i>\n}\n]\nH\n\n\n\n\n\n<i class='fa fa-apple'></i>",{t:"#000000"},"\n<i class='fa fa-arrow-down'></i>\n|\n\\\nJ",{t:"#000000\n\n\n\n\n\n\n\n\n\n#804020"},"\n<i class='fa fa-arrow-up'></i>\n:\n;\nK\n\n\n\n\n\nfn","\n<i class='fa fa-arrow-right'></i>\n\"\n'\nL\n\n\n\n\n\nnum",{c:"#eeddcc",f:1,fa:[2,2,5,5,8,0,2,2,0,0,0]},"Ins\n\n\n\n\n\nBS\nDel\n\n\nshift",{t:"#000000",g:true,a:7,f:3},""],
+["","",{c:"#cccccc",t:"#000000\n#804020",g:false,a:5,fa:[0,1,0,0,8]},"\nctrl\n\n\nZ","\nalt\n\n\nX",{t:"#000000\n\n\n\n\n\n\n\n\n\n#804020",a:4,fa:[2,1,0,0,8,0,0,0,0,0,1]},"^\n\n\n\nC\n\n\n\n\n\nfn","^\n\n\n\nV\n\n\n\n\n\nnum",{fa:[2,1,5,5,8,0,0,0,0,0,1]},"Prnt Scrn\n\n<\n,\nB\n\n\n\n\n\nshift","Scr Lock\n\n>\n.\nN\n\n\n\n\n\nalt","Paus\n\n?\n/\nM\n\n\n\n\n\nctrl",{t:"#000000\n#804020",a:5},"\nshift",{c:"#eeddcc",t:"#000000",g:true,a:7},"",""]

keyboards/jj40/keymaps/stevexyz/keymap.c

@@ -0,0 +1,292 @@
+/* Copyright 2019 Stefano Marago'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+/*
+ * This file is the QMK keymap to configure an ortholinear 40% keyboard
+ * (with 48 keys) into an ortholinear alpha-vderm 28 keys inspired layout
+ * "rules.mk" and "config.h" complete the configuration
+ */
+
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+  LAYER_HOME, // home base layer
+  LAYER_FUNC, // function keys and cursors
+  LAYER_NUMSYM, // numbers and other characters
+  LAYER_SYST, // media and other system keys
+  LAYER_NUMONLY, // numeric keypad
+  LAYER_LIGHTS, // numeric keypad
+  LAYER_MOUSE, // mouse layer
+};
+
+enum custom_keycodes {
+  CK_TRIPLEZERO = SAFE_RANGE,
+};
+
+enum {
+  TD_ENT_BSPC = 0,
+  TD_KPENT_BSPC,
+  TD_E_GRAVE,
+  TD_A_GRAVE,
+  TD_O_GRAVE,
+  TD_U_GRAVE,
+  TD_I_GRAVE,
+  TD_E_ACUTE,
+};
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_ENT_BSPC] = ACTION_TAP_DANCE_DOUBLE(KC_ENT, KC_BSPC),
+  [TD_KPENT_BSPC] = ACTION_TAP_DANCE_DOUBLE(KC_KP_ENTER, KC_BSPC),
+  [TD_E_GRAVE] = ACTION_TAP_DANCE_DOUBLE(KC_E, KC_E),
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/*
+ * LEGEND:
+ *
+ * ,--------------------------------.
+ * |     Top row: shifted character |
+ * | Central row: standard char     |
+ * |  Bottom row: hold modifier     |
+ * `--------------------------------'
+ *
+ *  "____" means free to be assigned
+ *
+ */
+
+
+/* Qwerty Home Layer
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  | Enter|      |
+ * |      | Shift| FnNav|NumSym| ____ | OSkey| OSkey| ____ | FnNav|NumSym| Shift|      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |   Z  |   X  |   C  |   V  |   B  |   N  |   M  | Space|      |      |
+ * |      |      | Ctrl |  Alt | FnNav|NumSym| Shift|  Alt | Ctrl | Shift|      |      | 
+ * `-----------------------------------------------------------------------------------'
+ */
+  [LAYER_HOME] = LAYOUT_ortho_4x12(
+         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+         XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, XXXXXXX, 
+         XXXXXXX, MT(MOD_LSFT, KC_A), LT(LAYER_FUNC, KC_S), LT(LAYER_NUMSYM, KC_D), KC_F, MT(MOD_LGUI, KC_G), MT(MOD_RGUI, KC_H), KC_J, LT(LAYER_FUNC, KC_K), LT(LAYER_NUMSYM, KC_L), MT(MOD_RSFT, KC_ENT), XXXXXXX,
+         XXXXXXX, XXXXXXX, MT(MOD_LCTL, KC_Z), MT(MOD_LALT, KC_X), LT(LAYER_FUNC, KC_C), LT(LAYER_NUMSYM, KC_V), MT(MOD_LSFT, KC_B), MT(MOD_RALT, KC_N), MT(MOD_RCTL, KC_M), MT(MOD_RSFT, KC_SPC), XXXXXXX, XXXXXXX ),
+
+/* Function and Navigation Layer
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |  ESC | Home | PgDn | PgUp |  End | Left | Down |  Up  | Right| Baksp|      |
+ * |      | Shift|xxxxxx|SysLay| ____ | ____ | ____ | ____ |xxxxxx|SysLay| Shift|      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |      |
+ * |      |      | Ctrl |  Alt |xxxxxx|SysLay| Shift|  Alt | Ctrl | Shift|      |      | 
+ * `-----------------------------------------------------------------------------------'
+ */
+  [LAYER_FUNC] = LAYOUT_ortho_4x12(
+         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+         XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX,
+         XXXXXXX, MT(MOD_LSFT, KC_ESC), KC_HOME, LT(LAYER_SYST, KC_PGDN), KC_PGUP, KC_END, KC_LEFT, KC_DOWN, KC_UP, LT(LAYER_SYST, KC_RGHT), MT(MOD_RSFT, KC_BSPC), XXXXXXX,
+         XXXXXXX, XXXXXXX, KC_LCTL, KC_LALT, KC_TRNS, MO(LAYER_SYST), KC_LSFT, KC_RALT, KC_RCTL, MT(MOD_RSFT, KC_SPC), XXXXXXX, XXXXXXX ),
+
+/* Number and Symbols Layer
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |      |
+ * |      |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |   ~  |   _  |   +  |   {  |   }  |  |   |   :  |   "  |      |      |
+ * |      |  TAB |   `  |   -  |   =  |   [  |   ]  |  \   |   ;  |   '  |      |      |
+ * |      | Shift|SysLay|xxxxxx| ____ | ____ | ____ | ____ |SysLay|xxxxxx| Shift|      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+
+ * |      |      |      |      |      |      |   <  |   >  |   ?  |      |      |      |
+ * |      |      | ____ | ____ | ____ | ____ |   ,  |   .  |   /  | ____ |      |      |
+ * |      |      | Ctrl |  Alt |SysLay|xxxxxx| Shift| ____ | ____ | Shift|      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [LAYER_NUMSYM] = LAYOUT_ortho_4x12(
+         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+         XXXXXXX, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX,
+         XXXXXXX, MT(MOD_LSFT, KC_TAB), LT(LAYER_SYST, KC_GRV), KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, LT(LAYER_SYST, KC_SCLN), KC_QUOT, MT(MOD_RSFT, KC_DEL), XXXXXXX,
+         XXXXXXX, XXXXXXX, KC_LCTL, KC_LALT, MO(LAYER_SYST), KC_TRNS, MT(MOD_LSFT, KC_COMM), KC_DOT, KC_SLSH, MT(MOD_RSFT, KC_SPC), XXXXXXX, XXXXXXX ),
+
+/* System Layer
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      | F11  | F12  |NumLay|LghLay| ____ | ____ | ____ | ____ |MouLay|Backsp|      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      | Caps | Mute | Vol- | Vol+ | Play | Next | ____ | ____ | ____ | Ins  |      |
+ * |      | Shift| ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | Shift|      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      | ____ | ____ | ____ | ____ |PrnScr|ScrLck|Pause | ____ |      |      |
+ * |      |      | Ctrl |  Alt | ____ | ____ | ____ | ____ | ____ | Shift|      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [LAYER_SYST] = LAYOUT_ortho_4x12(
+         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+         XXXXXXX, KC_F11, KC_F12, TG(LAYER_NUMONLY), TG(LAYER_LIGHTS), KC_NO, KC_NO, KC_NO, KC_NO, TG(LAYER_MOUSE), KC_BSPC, XXXXXXX,
+         XXXXXXX, MT(MOD_LSFT, KC_CAPS), KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MNXT, KC_NO, KC_NO, KC_NO, MT(MOD_RSFT, KC_INS), XXXXXXX,
+         XXXXXXX, XXXXXXX, KC_LCTL, KC_LALT, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, MT(MOD_RSFT, KC_SPC), XXXXXXX, XXXXXXX ),
+
+/* Numeric Keypad
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |NumLck| ____ |NumLay|  /   |  *   |  -   |  7   |  8   |  9   |Backsp|      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      | Tab  |  (   |  )   |  =   |  ,   |  +   |  4   |  5   |  6   | Enter|      |
+ * |      | Shift| ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | Shift|      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      | ____ | ____ | 000  |  .   |  0   |  1   |  2   |  3   |      |      |
+ * |      |      | Ctrl |  Alt | ____ | ____ | ____ | ____ | ____ | Shift|      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [LAYER_NUMONLY] = LAYOUT_ortho_4x12(
+         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+         XXXXXXX, KC_NLCK, KC_NO, TG(LAYER_NUMONLY), KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, KC_P7, KC_P8, KC_P9, KC_BSPC, XXXXXXX,
+         XXXXXXX, MT(MOD_LSFT, KC_TAB), KC_LPRN, KC_RPRN, KC_EQUAL, KC_KP_COMMA, KC_KP_PLUS, KC_P4, KC_P5, KC_P6, MT(MOD_LSFT, KC_KP_ENTER), XXXXXXX,
+         XXXXXXX, XXXXXXX, KC_LCTL, KC_LALT, CK_TRIPLEZERO, KC_KP_DOT, KC_P0, KC_P1, KC_P2, MT(MOD_LSFT, KC_P3), XXXXXXX, XXXXXXX ),
+
+/* Backlight adjustment Layer
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      | ____ | ____ | ____ |LghLay| ____ | Hue+ | Sat+ | Val+ | ____ | Plain|      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      | ____ | ____ |ModeFw|ModeBw| ____ | Hue- | Sat- | Val- | ____ |Toggle|      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |Breath|Rainbw| Swirl| Snake|Knight| XMas |Gradnt| Test |      |      |
+ * |      |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [LAYER_LIGHTS] = LAYOUT_ortho_4x12(
+         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+         XXXXXXX, KC_NO, KC_NO, KC_NO, TG(LAYER_LIGHTS), KC_NO, RGB_HUI, RGB_SAI, RGB_VAI, KC_NO, RGB_M_P, XXXXXXX,
+         XXXXXXX, KC_NO, KC_NO, RGB_MOD, RGB_RMOD, KC_NO, RGB_HUD, RGB_SAD, RGB_VAD, KC_NO, RGB_TOG, XXXXXXX,
+         XXXXXXX, XXXXXXX, RGB_MODE_BREATHE, RGB_MODE_RAINBOW, RGB_MODE_SWIRL, RGB_MODE_SNAKE, RGB_MODE_KNIGHT, RGB_MODE_XMAS, RGB_MODE_GRADIENT, RGB_MODE_RGBTEST, XXXXXXX, XXXXXXX ),
+
+/* Mouse emulation Layer
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      | Btn1 |  Up  | Btn2 | Whl+ | Accl0| Accl1| Accl2| ____ |MouLay| ____ |      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      | Left | Down | Right| Whl- | ____ | ____ | ____ | ____ | ____ | Enter|      |
+ * |      | ____ | ____ | ____ | ____ | OSkey| OSkey| ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | Space|      |      |
+ * |      |      | Ctrl |  Alt | ____ | ____ | Shift|  Alt | Ctrl | Shift|      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [LAYER_MOUSE] = LAYOUT_ortho_4x12(
+         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+         XXXXXXX, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_MS_WH_UP, KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, KC_NO, TG(LAYER_MOUSE), KC_NO, XXXXXXX,
+         XXXXXXX, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_WH_DOWN, KC_LGUI, KC_RGUI, KC_NO, KC_NO, KC_NO, KC_ENT, XXXXXXX,
+         XXXXXXX, XXXXXXX, KC_LCTL, KC_LALT, KC_NO, KC_NO, KC_LSFT, KC_RALT, KC_RCTL, MT(MOD_RSFT, KC_SPC), XXXXXXX, XXXXXXX ),
+
+};
+
+
+void matrix_init_user(void) {
+  // set num lock on at start independently of state (for numonly layer to work)
+  if (!(host_keyboard_leds() & (1<<USB_LED_NUM_LOCK))) {
+      SEND_STRING(SS_TAP(X_NUMLOCK)); //register_code(KC_NUMLOCK); unregister_code(KC_NUMLOCK);
+  }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case CK_TRIPLEZERO:
+      if (record->event.pressed) {
+        SEND_STRING("000");
+      } // else { when released... }
+      break;
+  }
+  return true;
+};
+
+
+/* Empty keyboard template
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |      |
+ * |      |      | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */

keyboards/jj40/keymaps/stevexyz/readme.md

@@ -0,0 +1,20 @@
+# jj28 (aka jj40 super micro edition :))
+
+With this configuration a 4x12 jj40 (with 48 keys) is transformed into an ortholinear PyroL-vderm 28 keys inspired layout one. This keyboard can be actually called jj28!
+
+![Bare layout](https://i.ibb.co/7GK1LY7/layout-0.jpg)
+
+![Fully described](https://i.ibb.co/kxTfTXH/layout-4.jpg)
+
+Why you should want to do something like this?
+There are many valid reasons.
+The main one to me might just be to be able to test such an "extreme" configuration for real if you have this easily available board on hand.
+But also because this setup might be even more confortable than the original 2u space one (for muscle memory having bnm letters nearer to zxcv).
+Or just more nice looking.
+Surely you have an additional option, and personally, after using it as a daily driver, I liked it, even if I was a bit slower in processing complicated sequences! :)
+
+Notes on layout:
+After few tests I found out that the space at the end is the best for people that are very used to “standard” keyboards (basically almost everybody), retaining years of muscle memory.
+Moreover, also shift, fn and numsym layer keys are good to be replicated on central line (and also keeping in the order will allow a single finger shift+fn on the left and also shift+num on the right).
+
+[Keyboard layout editor](http://www.keyboard-layout-editor.com/#/) raw data in keyboard-layout-editor-raw-data.txt file.

keyboards/jj40/keymaps/stevexyz/rules.mk

@@ -0,0 +1,22 @@
+# Build Options (yes/no)
+#
+BOOTMAGIC_ENABLE = no        # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes        # Audio control and System control(+450)
+CONSOLE_ENABLE = no          # Console for debug(+400)
+COMMAND_ENABLE = no          # Commands for debug and configuration
+NKRO_ENABLE = no             # USB Nkey Rollover (see: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work)
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+RGBLIGHT_CUSTOM_DRIVER = yes
+MIDI_ENABLE = no             # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no          # Unicode
+BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no            # Audio output on port C6
+FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no          # Enable support for HD44780 based LCDs (+400)
+
+TAP_DANCE_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/jnao/config.h

@@ -0,0 +1,52 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x1337
+#define PRODUCT_ID      0x6017
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Maple Computing
+#define PRODUCT         JNAO Keyboard
+#define DESCRIPTION     A no-frills ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 12
+
+#define MATRIX_ROW_PINS { E6, F0, F5, F6, F7 }
+#define MATRIX_COL_PINS { F1, F4, B1, B2, B3, B7, D1, D2, D4, D6, D7, B4 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN D0
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/jnao/info.json

@@ -0,0 +1,125 @@
+{
+  "keyboard_name": "JNAO",
+  "url": "",
+  "maintainer": "That-Canadian",
+  "width": 12,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_ortho_5x12": {
+      "layout": [
+        {"label":"`", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"6", "x":6, "y":0},
+        {"label":"7", "x":7, "y":0},
+        {"label":"8", "x":8, "y":0},
+        {"label":"9", "x":9, "y":0},
+        {"label":"0", "x":10, "y":0},
+        {"label":"Backspace", "x":11, "y":0},
+        {"label":"Tab", "x":0, "y":1},
+        {"label":"Q", "x":1, "y":1},
+        {"label":"W", "x":2, "y":1},
+        {"label":"E", "x":3, "y":1},
+        {"label":"R", "x":4, "y":1},
+        {"label":"T", "x":5, "y":1},
+        {"label":"Y", "x":6, "y":1},
+        {"label":"U", "x":7, "y":1},
+        {"label":"I", "x":8, "y":1},
+        {"label":"O", "x":9, "y":1},
+        {"label":"P", "x":10, "y":1},
+        {"label":"Delete", "x":11, "y":1},
+        {"label":"Esc", "x":0, "y":2},
+        {"label":"A", "x":1, "y":2},
+        {"label":"S", "x":2, "y":2},
+        {"label":"D", "x":3, "y":2},
+        {"label":"F", "x":4, "y":2},
+        {"label":"G", "x":5, "y":2},
+        {"label":"H", "x":6, "y":2},
+        {"label":"J", "x":7, "y":2},
+        {"label":"K", "x":8, "y":2},
+        {"label":"L", "x":9, "y":2},
+        {"label":";", "x":10, "y":2},
+        {"label":"'", "x":11, "y":2},
+        {"label":"Shift", "x":0, "y":3},
+        {"label":"Z", "x":1, "y":3},
+        {"label":"X", "x":2, "y":3},
+        {"label":"C", "x":3, "y":3},
+        {"label":"V", "x":4, "y":3},
+        {"label":"B", "x":5, "y":3},
+        {"label":"N", "x":6, "y":3},
+        {"label":"M", "x":7, "y":3},
+        {"label":",", "x":8, "y":3},
+        {"label":".", "x":9, "y":3},
+        {"label":"/", "x":10, "y":3},
+        {"label":"Enter", "x":11, "y":3},
+        {"label":"Fn", "x":0, "y":4},
+        {"label":"Ctrl", "x":1, "y":4},
+        {"label":"Alt", "x":2, "y":4},
+        {"label":"Meta", "x":3, "y":4},
+        {"label":"Lower", "x":4, "y":4},
+        {"label":"Space", "x":5, "y":4},
+        {"label":"Space", "x":6, "y":4},
+        {"label":"Raise", "x":7, "y":4},
+        {"label":"Left", "x":8, "y":4},
+        {"label":"Down", "x":9, "y":4},
+        {"label":"Up", "x":10, "y":4},
+        {"label":"Right", "x":11, "y":4}
+      ]
+    },
+    "LAYOUT_ortho_4x12": {
+      "layout": [
+        {"label":"Tab", "x":0, "y":0},
+        {"label":"Q", "x":1, "y":0},
+        {"label":"W", "x":2, "y":0},
+        {"label":"E", "x":3, "y":0},
+        {"label":"R", "x":4, "y":0},
+        {"label":"T", "x":5, "y":0},
+        {"label":"Y", "x":6, "y":0},
+        {"label":"U", "x":7, "y":0},
+        {"label":"I", "x":8, "y":0},
+        {"label":"O", "x":9, "y":0},
+        {"label":"P", "x":10, "y":0},
+        {"label":"Delete", "x":11, "y":0},
+        {"label":"Esc", "x":0, "y":1},
+        {"label":"A", "x":1, "y":1},
+        {"label":"S", "x":2, "y":1},
+        {"label":"D", "x":3, "y":1},
+        {"label":"F", "x":4, "y":1},
+        {"label":"G", "x":5, "y":1},
+        {"label":"H", "x":6, "y":1},
+        {"label":"J", "x":7, "y":1},
+        {"label":"K", "x":8, "y":1},
+        {"label":"L", "x":9, "y":1},
+        {"label":";", "x":10, "y":1},
+        {"label":"'", "x":11, "y":1},
+        {"label":"Shift", "x":0, "y":2},
+        {"label":"Z", "x":1, "y":2},
+        {"label":"X", "x":2, "y":2},
+        {"label":"C", "x":3, "y":2},
+        {"label":"V", "x":4, "y":2},
+        {"label":"B", "x":5, "y":2},
+        {"label":"N", "x":6, "y":2},
+        {"label":"M", "x":7, "y":2},
+        {"label":",", "x":8, "y":2},
+        {"label":".", "x":9, "y":2},
+        {"label":"/", "x":10, "y":2},
+        {"label":"Enter", "x":11, "y":2},
+        {"label":"Fn", "x":0, "y":3},
+        {"label":"Ctrl", "x":1, "y":3},
+        {"label":"Alt", "x":2, "y":3},
+        {"label":"Meta", "x":3, "y":3},
+        {"label":"Lower", "x":4, "y":3},
+        {"label":"Space", "x":5, "y":3},
+        {"label":"Space", "x":6, "y":3},
+        {"label":"Raise", "x":7, "y":3},
+        {"label":"Left", "x":8, "y":3},
+        {"label":"Down", "x":9, "y":3},
+        {"label":"Up", "x":10, "y":3},
+        {"label":"Right", "x":11, "y":3}
+      ]
+    }
+  }
+}

keyboards/jnao/jnao.c

@@ -0,0 +1 @@
+#include "jnao.h"

keyboards/jnao/jnao.h

@@ -0,0 +1,32 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_5x12( \
+    k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, \
+    k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, \
+    k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, \
+    k41, k42, k43, k44, k45, k46, k47, k48, k49, k410, k411, k412 \
+) \
+{ \
+    { k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012 }, \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112 }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212 }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312 }, \
+    { k41, k42, k43, k44, k45, k46, k47, k48, k49, k410, k411, k412 } \
+}
+
+#define LAYOUT_ortho_4x12( \
+    k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, \
+    k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, \
+    k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312 \
+) \
+{ \
+    {k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012}, \
+    {k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112}, \
+    {k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212}, \
+    {k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312}, \
+    {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO} \
+}

keyboards/jnao/keymaps/default/keymap.c

@@ -0,0 +1,155 @@
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _FUNCTION,
+    _ADJUST,
+};
+
+enum jnao_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+};
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Func |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  | Enter|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  `   | GUI  | ALT  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_ortho_5x12( \
+  KC_ESC,        KC_1,   KC_2,    KC_3,    KC_4,  KC_5,   KC_6,   KC_7,  KC_8,    KC_9,    KC_0,    KC_DEL,  \
+  KC_TAB,        KC_Q,   KC_W,    KC_E,    KC_R,  KC_T,   KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  MO(_FUNCTION), KC_A,   KC_S,    KC_D,    KC_F,  KC_G,   KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_ENT,  \
+  OSM(MOD_LSFT), KC_Z,   KC_X,    KC_C,    KC_V,  KC_B,   KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT, \
+  KC_LCTL,       KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      | Mute |      |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower |    Bksp     |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_ortho_5x12( \
+  KC_TILD, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  \
+  KC_ESC,  KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
+  _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, \
+  _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_MUTE, _______, KC_PIPE, \
+  _______, _______,  _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   4  |   5  |   6  |   +  |  F5  |  F6  |   -  |   =  |   [  |   ]  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |Enter |   7  |   8  |   9  |   -  |  F11 |  F12 |ISO # |ISO / | Mute |      |   \  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ,  |   0  |  .   |Lower |    Bksp     |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_ortho_5x12( \
+  KC_GRV,  KC_F1,   KC_F2, KC_F3,  KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  \
+  KC_ESC,  KC_1,    KC_2,  KC_3,   KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
+  _______, KC_4,    KC_5,  KC_6,   KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______, \
+  KC_ENT,  KC_7,    KC_8,  KC_9,   KC_MINS, KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, \
+  _______, KC_COMM, KC_0,  KC_DOT, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  ESC |  F1  |  F2  |  F3  |ALTF4 |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Taskmg|      |      |      |      |      |      |      |      |      |      |caltde|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |RESET |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_ortho_5x12( \
+  KC_ESC,  KC_F1,   KC_F2,   KC_F3,   LALT(KC_F4), KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  \
+  TSKMGR,  _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______, CALTDEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,      AG_NORM, AG_SWAP, QWERTY,  _______, _______, _______, _______, \
+  _______,  MUV_DE, MUV_IN,  MU_ON,   MU_OFF,      MI_ON,   MI_OFF,  _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______, RESET    \
+),
+
+/* Function
+ * ,-----------------------------------------------------------------------------------.
+ * |  Esc |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |   up |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Caps |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = LAYOUT_ortho_5x12( \
+  KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, \
+  KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+)
+
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+        case LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+      }
+    return true;
+};

keyboards/jnao/keymaps/default_4x12/keymap.c

@@ -0,0 +1,150 @@
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _FUNCTION,
+    _ADJUST,
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE
+};
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Func |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  | Enter|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  `   | GUI  | Alt  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_ortho_4x12(
+  KC_TAB,        KC_Q,   KC_W,    KC_E,    KC_R,  KC_T,   KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC,
+  MO(_FUNCTION), KC_A,   KC_S,    KC_D,    KC_F,  KC_G,   KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_ENT,
+  OSM(MOD_LSFT), KC_Z,   KC_X,    KC_C,    KC_V,  KC_B,   KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT,
+  KC_LCTL,       KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      | Mute |      |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_ortho_4x12(
+  KC_ESC,  KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+  _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______,
+  _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_MUTE, _______, KC_PIPE,
+  _______, _______,  _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   4  |   5  |   6  |   +  |  F5  |  F6  |   -  |   =  |   [  |   ]  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |Enter |   7  |   8  |   9  |   -  |  F11 |  F12 |ISO # |ISO / | Mute |      |   \  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ,  |   0  |  .   |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_ortho_4x12(
+  KC_ESC,  KC_1,    KC_2,  KC_3,   KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  _______, KC_4,    KC_5,  KC_6,   KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+  KC_ENT,  KC_7,    KC_8,  KC_9,   KC_MINS, KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS,
+  _______, KC_COMM, KC_0,  KC_DOT, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Taskmg|      |      |      |      |      |      |      |      |      |      |caltde|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | RESET|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_ortho_4x12(
+  TSKMGR,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CALTDEL,
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______, _______, _______, _______,
+  _______,  MUV_DE, MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET
+),
+
+/* Function
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Caps |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = LAYOUT_ortho_4x12(
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+  KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/jnao/readme.md

@@ -0,0 +1,14 @@
+JNAO
+====
+
+An no-frills 5x12 or 4x12 ortholinear keyboard
+
+Keyboard Maintainer: [That-Canadian](https://github.com/that-canadian)  
+Hardware Supported: JNAO PCB  
+Hardware Availability: [SpaceCat](https://spacecat.design) and [Keebio](https://keeb.io/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make jnao:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/jnao/rules.mk

@@ -0,0 +1,47 @@
+# MCU name
+MCU = atmega32u4
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = ortho_5x12 ortho_4x12
+LAYOUTS_HAS_RGB = no

keyboards/maartenwut/wonderland/config.h

@@ -0,0 +1,55 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xA71C
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Maartenwut
+#define PRODUCT         Wonderland
+#define DESCRIPTION     "QMK Firmware for the Wonderland"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B0,D1,D2,D3,D5}
+#define MATRIX_COL_PINS {F0,F1,F4,F5,F6,F7,E6,C7,C6,B6,B5,B4,D7,D6,D4}
+#define UNUSED_PINS
+
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Backlight configuration
+ */
+#define RGB_DI_PIN B7
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+
+#define QMK_ESC_OUTPUT F0 // usually COL
+#define QMK_ESC_INPUT B0 // usually ROW
+#define QMK_LED B1

keyboards/maartenwut/wonderland/keymaps/default/keymap.c

@@ -0,0 +1,25 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+  _BASE,
+  _FUNC
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_BASE] = LAYOUT(
+  KC_ESC,  KC_1,    KC_1,     KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_DEL,  KC_BSPC, \
+  KC_F10,  KC_TAB,  KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, \
+  RGB_TOG, KC_CAPS, KC_A,     KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT, \
+           KC_LSFT, KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  MO(1), \
+           KC_LCTL,           KC_LAPO, KC_BSPC, KC_LGUI, KC_SPC,  KC_RAPC,                            KC_RCTRL \
+   ),
+[_FUNC] = LAYOUT(
+  RGB_TOG,  VLK_TOG, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,   XXXXXXX, RESET, \
+  RGB_MOD,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, \
+  RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP,             XXXXXXX,  \
+            KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT, XXXXXXX, \
+            _______,          KC_LALT, _______, _______, _______, KC_RALT,                            _______ \
+   )
+};

keyboards/maartenwut/wonderland/keymaps/keebs/keymap.c

@@ -0,0 +1,26 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+  _BASE,
+  _FUNC
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_BASE] = LAYOUT(
+  KC_ESC, KC_GRV,  KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_DEL,  KC_BSPC, \
+  KC_F10, KC_TAB,  KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+ RGB_HUI, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT,          KC_ENT, \
+          KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1), \
+          KC_LCTL,       KC_LAPO, KC_LGUI, RGUI(KC_SPC), KC_SPC, KC_RAPC,                     KC_RCTRL \
+   ),
+[_FUNC] = LAYOUT(
+         RGB_TOG, VLK_TOG, KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, RESET, \
+RGB_MODE_FORWARD, XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,    XXXXXXX,    XXXXXXX,    XXXXXXX, XXXXXXX, \
+RGB_MODE_REVERSE, XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,    XXXXXXX,  KC_UP,         XXXXXXX, \
+              KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX,  XXXXXXX,  XXXXXXX,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX, \
+              KC_LCTL,     KC_LALT, KC_BSPC, KC_LGUI,      KC_SPC,  KC_RALT,                          KC_RCTRL \
+   )
+};
+
+

keyboards/maartenwut/wonderland/rules.mk

@@ -0,0 +1,58 @@
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+BOOTLOADER = qmk-dfu
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUTO_SHIFT_ENABLE = no
+VELOCIKEY_ENABLE = yes

keyboards/maartenwut/wonderland/wonderland.c

@@ -0,0 +1,42 @@
+#include "wonderland.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    setPinOutput(B1);
+    setPinOutput(B2);
+    setPinOutput(B3);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinLow(B1);
+    } else {
+        writePinHigh(B1);
+    }
+
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        writePinLow(B2);
+    } else {
+        writePinHigh(B2);
+    }
+
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+        writePinLow(B3);
+    } else {
+        writePinHigh(B3);
+    }
+	led_set_user(usb_led);
+}

keyboards/maartenwut/wonderland/wonderland.h

@@ -0,0 +1,22 @@
+#pragma once
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+#define LAYOUT( \
+    k10, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k20, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k30, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c,      k2e, \
+         k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+         k41,           k43, k45, k46,      k48, k4a,                     k4e  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, XXX, k2e}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \
+    {XXX, k41, XXX, k43, XXX, k45, k46, XXX, k48, XXX, k4a, XXX, XXX, XXX, k4e}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);

keyboards/massdrop/ctrl/keymaps/mac/keymap.c

@@ -102,11 +102,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             if (record->event.pressed) {
               switch (rgb_matrix_get_flags()) {
                 case LED_FLAG_ALL: {
-                    rgb_matrix_set_flags(LED_FLAG_KEYLIGHT);
+                    rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER);
                     rgb_matrix_set_color_all(0, 0, 0);
                   }
                   break;
-                case LED_FLAG_KEYLIGHT: {
+                case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: {
                     rgb_matrix_set_flags(LED_FLAG_UNDERGLOW);
                     rgb_matrix_set_color_all(0, 0, 0);
                   }

keyboards/moon/rules.mk

@@ -1,6 +1,3 @@
-# Project specific files
-SRC += i2c_master.c pca9555.c matrix.c
-
 # MCU name
 MCU = atmega32u4
 
@@ -50,10 +47,6 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   atmega32a    bootloadHID
 BOOTLOADER = atmel-dfu
 
-
-# Supported layouts
-LAYOUTS = tkl_ansi tkl_iso
-
 # Build Options
 #   change yes to no to disable
 #
@@ -74,4 +67,13 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+
+# custom matrix setup
 CUSTOM_MATRIX = yes
+
+VPATH += drivers/gpio
+SRC += pca9555.c matrix.c
+QUANTUM_LIB_SRC += i2c_master.c
+
+# Supported layouts
+LAYOUTS = tkl_ansi tkl_iso

keyboards/novelpad/config.h

@@ -14,8 +14,8 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifndef CONFIG_H
-#define CONFIG_H
+
+#pragma once
 
 #include "config_common.h"
 
@@ -31,35 +31,219 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 4
 
-/* key matrix pins */
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
 #define MATRIX_ROW_PINS { C2, C4, C5, C6, C7 }
 #define MATRIX_COL_PINS { D7, D6, D5, D4 }
 #define UNUSED_PINS
 
-/* COL2ROW or ROW2COL */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Set 0 if debouncing isn't needed */
+#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 10
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+     #define RGBLED_NUM 4
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+     #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
-
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    false \
-)
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
 
-#define BACKLIGHT_LEVELS 10
-#define BACKLIGHT_PIN B7
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
 
-#ifdef RGBLIGHT_ENABLE
-#define RGB_DI_PIN D3
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 4
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
 #endif
+*/
 
-#endif
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/novelpad/info.json

@@ -6,7 +6,32 @@
     "height": 5,
     "layouts": {
         "LAYOUT_ortho_5x4": {
-            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}]
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":3, "y":4}
+            ]
         }
     }
 }

keyboards/novelpad/keymaps/default/keymap.c

@@ -14,111 +14,60 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
+
 #include QMK_KEYBOARD_H
 
 enum custom_keycodes {
-  BL = SAFE_RANGE,
-  WK_RED,
-  WK_GREEN,
-  WK_BLUE
+    WK_RED = SAFE_RANGE,
+    WK_GREEN,
+    WK_BLUE
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_NLCK, KC_PSLS, KC_PAST, KC_ESC,
+        KC_P7,   KC_P8,   KC_P9,   KC_PMNS,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,   KC_TAB,
+        MO(1),   KC_P0,   KC_PDOT, KC_ENT
+    ),
 
-  [0] = LAYOUT(
-    KC_NLCK, KC_PSLS, KC_PAST, KC_ESC,
-    KC_P7,   KC_P8,   KC_P9,   KC_PMNS,
-    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-    KC_P1,   KC_P2,   KC_P3,   KC_TAB,
-    MO(1),   KC_P0,   KC_PDOT, KC_ENT
-  ),
-
-  [1] = LAYOUT(
-    _______, BL,      RGB_MODE_SWIRL, RESET,
-    RGB_TOG, RGB_MOD, RGB_MODE_PLAIN, RGB_MODE_SNAKE,
-    RGB_HUI, RGB_SAI, RGB_VAI,        RGB_MODE_KNIGHT,
-    RGB_HUD, RGB_SAD, RGB_VAD,        RGB_MODE_XMAS,
-    _______, WK_RED,  WK_GREEN,       WK_BLUE
-  ),
-
+    [1] = LAYOUT(
+        _______, BL_STEP, RGB_M_SW, RESET,
+        RGB_TOG, RGB_MOD, RGB_M_P,  RGB_M_SN,
+        RGB_HUI, RGB_SAI, RGB_VAI,  RGB_M_K,
+        RGB_HUD, RGB_SAD, RGB_VAD,  RGB_M_X,
+        _______, WK_RED,  WK_GREEN, WK_BLUE
+    )
 };
 
-void matrix_init_user(void) {
-
-  rgblight_setrgb(0,255,0);
-}
-
-void matrix_scan_user(void) {
+void keyboard_post_init_user(void) {
+    rgblight_setrgb(0, 255, 0);
 }
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-  case BL:
-    if (record->event.pressed) {
-#ifdef BACKLIGHT_ENABLE
-      backlight_step();
-#endif
+    switch (keycode) {
+        case WK_RED:
+            if (record->event.pressed) {
+                rgblight_show_solid_color(0xFF, 0x00, 0x00);
+            } else {
+                rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
+            }
+            return false;
+        case WK_GREEN:
+            if (record->event.pressed) {
+                rgblight_show_solid_color(0x00, 0xFF, 0x00);
+            } else {
+                rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
+            }
+            return false;
+        case WK_BLUE:
+            if (record->event.pressed) {
+                rgblight_show_solid_color(0x00, 0x00, 0xFF);
+            } else {
+                rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
+            }
+            return false;
     }
-    return false;
-    break;
-  case WK_RED:
-      if (record->event.pressed) {
-        rgblight_show_solid_color(0xFF, 0, 0);
-      } else {
-        rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
-      }
-      return false;
-      break;
-    case WK_GREEN:
-      if (record->event.pressed) {
-        rgblight_show_solid_color(0, 0xFF, 0);
-      } else {
-        rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
-      }
-      return false;
-      break;
-    case WK_BLUE:
-      if (record->event.pressed) {
-        rgblight_show_solid_color(0, 0, 0xFF);
-      } else {
-        rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
+    return true;
 }

keyboards/novelpad/novelpad.c

@@ -14,4 +14,5 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
+
 #include "novelpad.h"

keyboards/novelpad/novelpad.h

@@ -14,25 +14,23 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifndef KB_H
-#define KB_H
+
+#pragma once
 
 #include "quantum.h"
 
 #define LAYOUT_ortho_5x4( \
-	K00, K01, K02, K03, \
-	K10, K11, K12, K13, \
-	K20, K21, K22, K23, \
-	K30, K31, K32, K33, \
-  K40, K41, K42, K43  \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22, K23, \
+    K30, K31, K32, K33, \
+    K40, K41, K42, K43  \
 ) { \
-	{ K00,   K01,   K02,   K03 }, \
-	{ K10,   K11,   K12,   K13 }, \
-	{ K20,   K21,   K22,   K23 }, \
-	{ K30,   K31,   K32,   K33 }, \
-  { K40,   K41,   K42,   K43 } \
+    { K00,   K01,   K02,   K03 }, \
+    { K10,   K11,   K12,   K13 }, \
+    { K20,   K21,   K22,   K23 }, \
+    { K30,   K31,   K32,   K33 }, \
+    { K40,   K41,   K42,   K43 } \
 }
 
 #define LAYOUT LAYOUT_ortho_5x4
-
-#endif

keyboards/novelpad/readme.md

@@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make novelpad:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/novelpad/rules.mk

@@ -1,44 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
 
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
 
 
 # Build Options

keyboards/planck/ez/config.h

@@ -139,6 +139,11 @@
 
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+
+#define RGB_MATRIX_LED_PROCESS_LIMIT 5
+#define RGB_MATRIX_LED_FLUSH_LIMIT 26
+
 
 #define IGNORE_MOD_TAP_INTERRUPT
 

keyboards/planck/ez/ez.c

@@ -16,8 +16,8 @@
 #include "ez.h"
 #include "ch.h"
 #include "hal.h"
- keyboard_config_t keyboard_config;
 
+keyboard_config_t keyboard_config;
 
 #ifdef RGB_MATRIX_ENABLE
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
@@ -106,6 +106,7 @@ led_config_t g_led_config = { {
 } };
 
 void suspend_power_down_kb(void) {
+    rgb_matrix_set_color_all(0, 0, 0);
     rgb_matrix_set_suspend_state(true);
     suspend_power_down_user();
 }
@@ -207,33 +208,65 @@ void led_initialize_hardware(void) {
 }
 
 void keyboard_pre_init_kb(void) {
+    if (!eeconfig_is_enabled()) {
+      eeconfig_init();
+    }
     // read kb settings from eeprom
     keyboard_config.raw = eeconfig_read_kb();
-
-    // initialize settings for front LEDs
+#if defined(RGB_MATRIX_ENABLE) && defined(ORYX_CONFIGURATOR)
+    if (keyboard_config.rgb_matrix_enable) {
+        rgb_matrix_set_flags(LED_FLAG_ALL);
+    } else {
+        rgb_matrix_set_flags(LED_FLAG_NONE);
+    }
+#endif
     led_initialize_hardware();
+    keyboard_pre_init_user();
 }
 
+#if defined(RGB_MATRIX_ENABLE) && defined(ORYX_CONFIGURATOR)
+void keyboard_post_init_kb(void) {
+    rgb_matrix_enable_noeeprom();
+    keyboard_post_init_user();
+}
+#endif
+
 void eeconfig_init_kb(void) {  // EEPROM is getting reset!
     keyboard_config.raw = 0;
+    keyboard_config.rgb_matrix_enable = true;
     keyboard_config.led_level = 4;
     eeconfig_update_kb(keyboard_config.raw);
     eeconfig_init_user();
 }
 
+
+#ifdef ORYX_CONFIGURATOR
+
+#ifndef PLANCK_EZ_USER_LEDS
+
+#ifndef PLANCK_EZ_LED_LOWER
+#    define PLANCK_EZ_LED_LOWER 3
+#endif
+#ifndef PLANCK_EZ_LED_RAISE
+#    define PLANCK_EZ_LED_RAISE 4
+#endif
+#ifndef PLANCK_EZ_LED_ADJUST
+#    define PLANCK_EZ_LED_ADJUST 6
+#endif
+
 layer_state_t layer_state_set_kb(layer_state_t state) {
     planck_ez_left_led_off();
     planck_ez_right_led_off();
     state = layer_state_set_user(state);
     uint8_t layer = biton32(state);
     switch (layer) {
-        case 3:
+        case PLANCK_EZ_LED_LOWER:
             planck_ez_left_led_on();
             break;
-        case 4:
+        case PLANCK_EZ_LED_RAISE:
             planck_ez_right_led_on();
             break;
-        case 6:
+        case PLANCK_EZ_LED_ADJUST:
             planck_ez_right_led_on();
             planck_ez_left_led_on();
             break;
@@ -242,7 +275,7 @@ layer_state_t layer_state_set_kb(layer_state_t state) {
     }
     return state;
 }
-
+#endif
 
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
     switch (keycode) {
@@ -258,6 +291,51 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
                  layer_state_set_kb(layer_state);
             }
             break;
+#ifdef RGB_MATRIX_ENABLE
+        case TOGGLE_LAYER_COLOR:
+            if (record->event.pressed) {
+                keyboard_config.disable_layer_led ^= 1;
+                if (keyboard_config.disable_layer_led)
+                    rgb_matrix_set_color_all(0, 0, 0);
+                eeconfig_update_kb(keyboard_config.raw);
+            }
+            break;
+        case RGB_TOG:
+            if (record->event.pressed) {
+              switch (rgb_matrix_get_flags()) {
+                case LED_FLAG_ALL: {
+                    rgb_matrix_set_flags(LED_FLAG_NONE);
+                    keyboard_config.rgb_matrix_enable = false;
+                    rgb_matrix_set_color_all(0, 0, 0);
+                  }
+                  break;
+                default: {
+                    rgb_matrix_set_flags(LED_FLAG_ALL);
+                    keyboard_config.rgb_matrix_enable = true;
+                  }
+                  break;
+              }
+              eeconfig_update_kb(keyboard_config.raw);
+            }
+            return false;
+#endif
     }
-    return true;
+    return process_record_user(keycode, record);
 }
+#endif
+
+#ifdef AUDIO_ENABLE
+bool music_mask_kb(uint16_t keycode) {
+    switch (keycode) {
+    case QK_LAYER_TAP ... QK_ONE_SHOT_LAYER_MAX:
+    case QK_LAYER_TAP_TOGGLE ... QK_LAYER_MOD_MAX:
+    case QK_MOD_TAP ... QK_MOD_TAP_MAX:
+    case AU_ON ... MUV_DE:
+    case RESET:
+    case EEP_RST:
+        return false;
+    default:
+        return music_mask_user(keycode);
+    }
+}
+#endif