Add the ability to disable the USB startup check for Chibios

- Added support for NO_USB_STARTUP_CHECK. This allows the keyboard do function and not get stuck in a SUSPENDED state loop in case of no USB connection.
- Added support for WAIT_FOR_USB. In LUFA no keyboard has this flag enable therefor no keyboard waits for usb to be active.
- Added documentation for both configuration flags as they were missing.

CODE_OF_CONDUCT.md

@@ -1,10 +1,10 @@
 # Code Of Conduct
 
-QMK strives to be an inclusive and tolerant community. We welcome participation from anyone regardless of age, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, political belief, race, religion, or sexual identity and orientation. 
+QMK strives to be an inclusive, tolerant, and welcoming community. We encourage participation from anyone regardless of age, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, political belief, race, religion, or sexual identity and orientation.
 
-> “A gentle word turns away wrath, but a harsh word stirs up anger.”
+> “A gentle word turns away wrath, but a harsh word stirs up anger."
 
-Our users, contributors, and collaborators are expected to treat each other with respect, to assume good intentions, and to gently correct, where possible, rather than react with escalation. Some examples of behavior we will not tolerate include, but is not limited to:
+Our users, contributors, and collaborators are expected to treat each other with kindness and respect, to assume good intentions, and to gently correct, where possible, rather than react with escalation. While our goal is to be as accurate as possible, kindness and understanding are more valuable than correctness. Some examples of behavior we will not tolerate include, but is not limited to:
 
 * The use of sexualized language or imagery
 * Unwelcome advances, sexual or otherwise

Makefile

@@ -67,7 +67,7 @@ $(eval $(call NEXT_PATH_ELEMENT))
 # It's really a very simple if else chain, if you squint enough,
 # but the makefile syntax makes it very verbose.
 # If we are in a subfolder of keyboards
-# 
+#
 # *** No longer needed **
 #
 # ifeq ($(CURRENT_PATH_ELEMENT),keyboards)
@@ -307,11 +307,6 @@ define PARSE_KEYBOARD
     KEYBOARD_FOLDER_PATH_3 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_2)))
     KEYBOARD_FOLDER_PATH_4 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_3)))
     KEYBOARD_FOLDER_PATH_5 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_4)))
-    KEYBOARD_FOLDER_1 := $$(notdir $$(KEYBOARD_FOLDER_PATH_1))
-    KEYBOARD_FOLDER_2 := $$(notdir $$(KEYBOARD_FOLDER_PATH_2))
-    KEYBOARD_FOLDER_3 := $$(notdir $$(KEYBOARD_FOLDER_PATH_3))
-    KEYBOARD_FOLDER_4 := $$(notdir $$(KEYBOARD_FOLDER_PATH_4))
-    KEYBOARD_FOLDER_5 := $$(notdir $$(KEYBOARD_FOLDER_PATH_5))
 
     KEYMAPS :=
     # get a list of all keymaps
@@ -325,35 +320,35 @@ define PARSE_KEYBOARD
         $$(KEYBOARD_FOLDER_3) $$(KEYBOARD_FOLDER_4) $$(KEYBOARD_FOLDER_5), $$(KEYMAPS)))
 
     KEYBOARD_LAYOUTS :=
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_5)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_5)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_4)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_4)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_3)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_3)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_2)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_2)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_1)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_1)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
 
     LAYOUT_KEYMAPS :=
     $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.)))))
-    
+
     KEYMAPS := $$(sort $$(KEYMAPS) $$(LAYOUT_KEYMAPS))
 
     # if the rule after removing the start of it is empty (we haven't specified a kemap or target)

build_keyboard.mk

@@ -1,3 +1,9 @@
+# Determine what keyboard we are building and setup the build environment.
+#
+# We support folders up to 5 levels deep below `keyboards/`. This file is
+# responsible for determining which folder is being used and doing the
+# corresponding environment setup.
+
 ifndef VERBOSE
 .SILENT:
 endif
@@ -6,26 +12,15 @@ endif
 
 include common.mk
 
-# 5/4/3/2/1
-KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
-KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
-KEYBOARD_FOLDER_PATH_3 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_2)))
-KEYBOARD_FOLDER_PATH_4 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_3)))
-KEYBOARD_FOLDER_PATH_5 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_4)))
-KEYBOARD_FOLDER_1 := $(notdir $(KEYBOARD_FOLDER_PATH_1))
-KEYBOARD_FOLDER_2 := $(notdir $(KEYBOARD_FOLDER_PATH_2))
-KEYBOARD_FOLDER_3 := $(notdir $(KEYBOARD_FOLDER_PATH_3))
-KEYBOARD_FOLDER_4 := $(notdir $(KEYBOARD_FOLDER_PATH_4))
-KEYBOARD_FOLDER_5 := $(notdir $(KEYBOARD_FOLDER_PATH_5))
-
+# Set the filename for the final firmware binary
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
-
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
 
 # Force expansion
 TARGET := $(TARGET)
 
+# For split boards we need to set a master half.
 MASTER ?= left
 ifdef master
     MASTER = $(master)
@@ -39,35 +34,58 @@ $(error MASTER does not have a valid value(left/right))
     endif
 endif
 
+# Determine which subfolders exist.
+KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
+KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
+KEYBOARD_FOLDER_PATH_3 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_2)))
+KEYBOARD_FOLDER_PATH_4 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_3)))
+KEYBOARD_FOLDER_PATH_5 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_4)))
+KEYBOARD_FOLDER_1 := $(notdir $(KEYBOARD_FOLDER_PATH_1))
+KEYBOARD_FOLDER_2 := $(notdir $(KEYBOARD_FOLDER_PATH_2))
+KEYBOARD_FOLDER_3 := $(notdir $(KEYBOARD_FOLDER_PATH_3))
+KEYBOARD_FOLDER_4 := $(notdir $(KEYBOARD_FOLDER_PATH_4))
+KEYBOARD_FOLDER_5 := $(notdir $(KEYBOARD_FOLDER_PATH_5))
 KEYBOARD_PATHS :=
-
 KEYBOARD_PATH_1 := keyboards/$(KEYBOARD_FOLDER_PATH_1)
 KEYBOARD_PATH_2 := keyboards/$(KEYBOARD_FOLDER_PATH_2)
 KEYBOARD_PATH_3 := keyboards/$(KEYBOARD_FOLDER_PATH_3)
 KEYBOARD_PATH_4 := keyboards/$(KEYBOARD_FOLDER_PATH_4)
 KEYBOARD_PATH_5 := keyboards/$(KEYBOARD_FOLDER_PATH_5)
 
-ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
     KEYBOARD_PATHS += $(KEYBOARD_PATH_5)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
+    KEYBOARD_PATHS += $(KEYBOARD_PATH_4)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
+    KEYBOARD_PATHS += $(KEYBOARD_PATH_3)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
+    KEYBOARD_PATHS += $(KEYBOARD_PATH_2)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
+    KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
+endif
+
+# Pull in rules.mk files from all our subfolders
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
     include $(KEYBOARD_PATH_5)/rules.mk
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_4)/rules.mk)","")
-    KEYBOARD_PATHS += $(KEYBOARD_PATH_4)
     include $(KEYBOARD_PATH_4)/rules.mk
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_3)/rules.mk)","")
-    KEYBOARD_PATHS += $(KEYBOARD_PATH_3)
     include $(KEYBOARD_PATH_3)/rules.mk
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_2)/rules.mk)","")
-    KEYBOARD_PATHS += $(KEYBOARD_PATH_2)
     include $(KEYBOARD_PATH_2)/rules.mk
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
-    KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
     include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
+# Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 
 KEYBOARD_C_1 := $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).c
@@ -95,6 +113,15 @@ endif
 OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE)
 
 
+# Setup the define for QMK_KEYBOARD_H. This is used inside of keymaps so
+# that the same keymap may be used on multiple keyboards.
+#
+# We grab the most top-level include file that we can. That file should
+# use #ifdef statements to include all the neccesary subfolder includes,
+# as described here:
+#
+#    https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic
+#
 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).h)","")
     QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h
 endif
@@ -111,13 +138,18 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).h)","")
     QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_5).h
 endif
 
-# We can assume a ChibiOS target When MCU_FAMILY is defined , since it's not used for LUFA
+# Determine and set parameters based on the keyboard's processor family.
+# We can assume a ChibiOS target When MCU_FAMILY is defined since it's
+# not used for LUFA
 ifdef MCU_FAMILY
-    FIRMWARE_FORMAT=bin
+    FIRMWARE_FORMAT?=bin
     PLATFORM=CHIBIOS
+else ifdef ARM_ATSAM
+    PLATFORM=ARM_ATSAM
+    FIRMWARE_FORMAT=bin
 else
     PLATFORM=AVR
-    FIRMWARE_FORMAT=hex
+    FIRMWARE_FORMAT?=hex
 endif
 
 ifeq ($(PLATFORM),CHIBIOS)
@@ -148,6 +180,7 @@ ifeq ($(PLATFORM),CHIBIOS)
     endif
 endif
 
+# Find all of the config.h files and add them to our CONFIG_H define.
 CONFIG_H :=
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","")
     CONFIG_H += $(KEYBOARD_PATH_5)/config.h
@@ -203,7 +236,7 @@ else
     # this state should never be reached
 endif
 
-# User space stuff
+# Userspace setup and definitions
 ifeq ("$(USER_NAME)","")
     USER_NAME := $(KEYMAP)
 endif
@@ -256,6 +289,11 @@ endif
     include $(TMK_PATH)/avr.mk
 endif
 
+ifeq ($(PLATFORM),ARM_ATSAM)
+    include $(TMK_PATH)/arm_atsam.mk
+    include $(TMK_PATH)/protocol/arm_atsam.mk
+endif
+
 ifeq ($(PLATFORM),CHIBIOS)
     include $(TMK_PATH)/protocol/chibios.mk
 endif
@@ -283,11 +321,6 @@ $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 
 # Default target.
 all: build check-size
-
-# Change the build target to build a HEX file or a library.
 build: elf cpfirmware
-#build: elf hex eep lss sym
-#build: lib
-
 
 include $(TMK_PATH)/rules.mk

common.mk

@@ -3,16 +3,16 @@ include message.mk
 # Directory common source files exist
 TOP_DIR = .
 TMK_DIR = tmk_core
-TMK_PATH = $(TOP_DIR)/$(TMK_DIR)
-LIB_PATH = $(TOP_DIR)/lib
+TMK_PATH = $(TMK_DIR)
+LIB_PATH = lib
 
 QUANTUM_DIR = quantum
-QUANTUM_PATH = $(TOP_DIR)/$(QUANTUM_DIR)
+QUANTUM_PATH = $(QUANTUM_DIR)
 
 DRIVER_DIR = drivers
-DRIVER_PATH = $(TOP_DIR)/$(DRIVER_DIR)
+DRIVER_PATH = $(DRIVER_DIR)
 
-BUILD_DIR := $(TOP_DIR)/.build
+BUILD_DIR := .build
 
 COMMON_VPATH := $(TOP_DIR)
 COMMON_VPATH += $(TMK_PATH)
@@ -21,4 +21,5 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
 COMMON_VPATH += $(QUANTUM_PATH)/audio
 COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
 COMMON_VPATH += $(QUANTUM_PATH)/api
-COMMON_VPATH += $(DRIVER_PATH)
+COMMON_VPATH += $(QUANTUM_PATH)/split_common
+COMMON_VPATH += $(DRIVER_PATH)

common_features.mk

@@ -61,8 +61,8 @@ endif
 
 ifeq ($(strip $(STENO_ENABLE)), yes)
     OPT_DEFS += -DSTENO_ENABLE
-	VIRTSER_ENABLE := yes
-	SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
+    VIRTSER_ENABLE := yes
+    SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
 endif
 
 ifeq ($(strip $(VIRTSER_ENABLE)), yes)
@@ -75,9 +75,9 @@ ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
-	OPT_DEFS += -DPOINTING_DEVICE_ENABLE
-	OPT_DEFS += -DMOUSE_ENABLE
-	SRC += $(QUANTUM_DIR)/pointing_device.c
+    OPT_DEFS += -DPOINTING_DEVICE_ENABLE
+    OPT_DEFS += -DMOUSE_ENABLE
+    SRC += $(QUANTUM_DIR)/pointing_device.c
 endif
 
 ifeq ($(strip $(UCIS_ENABLE)), yes)
@@ -110,12 +110,14 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
     else
-	    SRC += ws2812.c
+        SRC += ws2812.c
     endif
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
     OPT_DEFS += -DRGB_MATRIX_ENABLE
+    OPT_DEFS += -DIS31FL3731
+    COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3731.c
     SRC += i2c_master.c
     SRC += $(QUANTUM_DIR)/color.c
@@ -123,6 +125,28 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
     CIE1931_CURVE = yes
 endif
 
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
+    OPT_DEFS += -DRGB_MATRIX_ENABLE
+    OPT_DEFS += -DIS31FL3731
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3731.c
+    SRC += i2c_master.c
+    SRC += $(QUANTUM_DIR)/color.c
+    SRC += $(QUANTUM_DIR)/rgb_matrix.c
+    CIE1931_CURVE = yes
+endif
+
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
+    OPT_DEFS += -DRGB_MATRIX_ENABLE
+    OPT_DEFS += -DIS31FL3733
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3733.c
+    SRC += i2c_master.c
+    SRC += $(QUANTUM_DIR)/color.c
+    SRC += $(QUANTUM_DIR)/rgb_matrix.c
+    CIE1931_CURVE = yes
+endif
+
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
     OPT_DEFS += -DTAP_DANCE_ENABLE
     SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
@@ -169,7 +193,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
         CIE1931_CURVE = yes
     endif
-		ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+        ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
     endif
 endif
@@ -200,7 +224,7 @@ endif
 
 ifeq ($(strip $(HD44780_ENABLE)), yes)
     SRC += drivers/avr/hd44780.c
-	OPT_DEFS += -DHD44780_ENABLE
+    OPT_DEFS += -DHD44780_ENABLE
 endif
 
 QUANTUM_SRC:= \
@@ -210,5 +234,17 @@ QUANTUM_SRC:= \
     $(QUANTUM_DIR)/process_keycode/process_leader.c
 
 ifndef CUSTOM_MATRIX
-    QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+    ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
+    else
+        QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+    endif
+endif
+
+ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+    OPT_DEFS += -DSPLIT_KEYBOARD
+    QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
+                $(QUANTUM_DIR)/split_common/split_util.c \
+                $(QUANTUM_DIR)/split_common/i2c.c \
+                $(QUANTUM_DIR)/split_common/serial.c  
 endif

docs/_sidebar.md

@@ -1,36 +1,51 @@
-* [Getting Started](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [Install Build Tools](getting_started_build_tools.md)
-    * Alternative: [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
 * [Complete Newbs Guide](newbs.md)
   * [Getting Started](newbs_getting_started.md)
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
 
+* [QMK Basics](README.md)
+  * [QMK Introduction](getting_started_introduction.md)
+  * [Contributing to QMK](contributing.md)
+  * [How to Use Github](getting_started_github.md)
+  * [Getting Help](getting_started_getting_help.md)
+
 * [FAQ](faq.md)
   * [General FAQ](faq_general.md)
   * [Build/Compile QMK](faq_build.md)
   * [Debugging/Troubleshooting QMK](faq_debug.md)
   * [Keymap](faq_keymap.md)
 
+* Detailed Guides
+  * [Install Build Tools](getting_started_build_tools.md)
+  * [Vagrant Guide](getting_started_vagrant.md)
+  * [Build/Compile Instructions](getting_started_make_guide.md)
+  * [Flashing Firmware](flashing.md)
+  * [Customizing Functionality](custom_quantum_functions.md)
+  * [Keymap Overview](keymap.md)
+
 * [Hardware](hardware.md)
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
   * [AVR Processors](hardware_avr.md)
-  * ARM Processors (TBD)
   * [Drivers](hardware_drivers.md)
 
+* Reference
+  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
+  * [Config Options](config_options.md)
+  * [Keycodes](keycodes.md)
+  * [Documentation Best Practices](documentation_best_practices.md)
+  * [Documentation Templates](documentation_templates.md)
+  * [Glossary](reference_glossary.md)
+  * [Unit Testing](unit_testing.md)
+  * [Useful Functions](ref_functions.md)
+
 * [Features](features.md)
+  * [Basic Keycodes](keycodes_basic.md)
+  * [Quantum Keycodes](quantum_keycodes.md)
   * [Advanced Keycodes](feature_advanced_keycodes.md)
   * [Audio](feature_audio.md)
   * [Auto Shift](feature_auto_shift.md)
   * [Backlight](feature_backlight.md)
+  * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
@@ -40,12 +55,13 @@
   * [Leader Key](feature_leader_key.md)
   * [Macros](feature_macros.md)
   * [Mouse Keys](feature_mouse_keys.md)
+  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
   * [Pointing Device](feature_pointing_device.md)
   * [PS/2 Mouse](feature_ps2_mouse.md)
   * [RGB Lighting](feature_rgblight.md)
   * [RGB Matrix](feature_rgb_matrix.md)
-  * [Space Cadet Shift](feature_space_cadet.md)
-  * [Space Cadet Shift Enter](feature_space_shift_cadet.md)
+  * [Space Cadet Shift](feature_space_cadet_shift.md)
+  * [Space Cadet Shift Enter](feature_space_cadet_shift_enter.md)
   * [Stenography](feature_stenography.md)
   * [Swap Hands](feature_swap_hands.md)
   * [Tap Dance](feature_tap_dance.md)
@@ -53,32 +69,8 @@
   * [Thermal Printer](feature_thermal_printer.md)
   * [Unicode](feature_unicode.md)
   * [Userspace](feature_userspace.md)
-
-* [Keycodes](keycodes.md)
-  * [Backlight](feature_backlight.md#backlight-keycodes)
-  * [Basic](keycodes_basic.md)
-  * [Bluetooth](feature_bluetooth.md#bluetooth-keycodes)
-  * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
-  * [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
-  * [Mod+Key](feature_advanced_keycodes.md#modifier-keys)
-  * [Mod Tap](feature_advanced_keycodes.md#mod-tap)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [Quantum](quantum_keycodes.md)
-  * [RGB Light](feature_rgblight.md#rgblight-keycodes)
-  * [Shifted Keys](feature_advanced_keycodes.md#shifted-keycodes)
-  * [Stenography](feature_stenography.md#keycode-reference)
-  * [Thermal Printer](feature_thermal_printer.md#thermal-printer-keycodes)
   * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
 
-* Reference
-  * [Config Options](config_options.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
-  * [Glossary](reference_glossary.md)
-  * [Keymap Overview](keymap.md)
-  * [Unit Testing](unit_testing.md)
-
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)

docs/_summary.md

@@ -1,36 +1,51 @@
-* [Getting Started](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [Install Build Tools](getting_started_build_tools.md)
-    * Alternative: [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
 * [Complete Newbs Guide](newbs.md)
   * [Getting Started](newbs_getting_started.md)
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
 
+* [QMK Basics](README.md)
+  * [QMK Introduction](getting_started_introduction.md)
+  * [Contributing to QMK](contributing.md)
+  * [How to Use Github](getting_started_github.md)
+  * [Getting Help](getting_started_getting_help.md)
+
 * [FAQ](faq.md)
   * [General FAQ](faq_general.md)
   * [Build/Compile QMK](faq_build.md)
   * [Debugging/Troubleshooting QMK](faq_debug.md)
   * [Keymap](faq_keymap.md)
 
+* Detailed Guides
+  * [Install Build Tools](getting_started_build_tools.md)
+  * [Vagrant Guide](getting_started_vagrant.md)
+  * [Build/Compile Instructions](getting_started_make_guide.md)
+  * [Flashing Firmware](flashing.md)
+  * [Customizing Functionality](custom_quantum_functions.md)
+  * [Keymap Overview](keymap.md)
+
 * [Hardware](hardware.md)
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
   * [AVR Processors](hardware_avr.md)
-  * ARM Processors (TBD)
   * [Drivers](hardware_drivers.md)
 
+* Reference
+  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
+  * [Config Options](config_options.md)
+  * [Keycodes](keycodes.md)
+  * [Documentation Best Practices](documentation_best_practices.md)
+  * [Documentation Templates](documentation_templates.md)
+  * [Glossary](reference_glossary.md)
+  * [Unit Testing](unit_testing.md)
+  * [Useful Functions](ref_functions.md)
+
 * [Features](features.md)
+  * [Basic Keycodes](keycodes_basic.md)
+  * [Quantum Keycodes](quantum_keycodes.md)
   * [Advanced Keycodes](feature_advanced_keycodes.md)
   * [Audio](feature_audio.md)
   * [Auto Shift](feature_auto_shift.md)
   * [Backlight](feature_backlight.md)
+  * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
@@ -40,10 +55,13 @@
   * [Leader Key](feature_leader_key.md)
   * [Macros](feature_macros.md)
   * [Mouse Keys](feature_mouse_keys.md)
+  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
   * [Pointing Device](feature_pointing_device.md)
   * [PS/2 Mouse](feature_ps2_mouse.md)
   * [RGB Lighting](feature_rgblight.md)
-  * [Space Cadet](feature_space_cadet.md)
+  * [RGB Matrix](feature_rgb_matrix.md)
+  * [Space Cadet Shift](feature_space_cadet_shift.md)
+  * [Space Cadet Shift Enter](feature_space_cadet_shift_enter.md)
   * [Stenography](feature_stenography.md)
   * [Swap Hands](feature_swap_hands.md)
   * [Tap Dance](feature_tap_dance.md)
@@ -51,32 +69,8 @@
   * [Thermal Printer](feature_thermal_printer.md)
   * [Unicode](feature_unicode.md)
   * [Userspace](feature_userspace.md)
-
-* [Keycodes](keycodes.md)
-  * [Backlight](feature_backlight.md#backlight-keycodes)
-  * [Basic](keycodes_basic.md)
-  * [Bluetooth](feature_bluetooth.md#bluetooth-keycodes)
-  * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
-  * [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
-  * [Mod+Key](feature_advanced_keycodes.md#modifier-keys)
-  * [Mod Tap](feature_advanced_keycodes.md#mod-tap)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [Quantum](quantum_keycodes.md)
-  * [RGB Light](feature_rgblight.md#rgblight-keycodes)
-  * [Shifted Keys](feature_advanced_keycodes.md#shifted-keycodes)
-  * [Stenography](feature_stenography.md#keycode-reference)
-  * [Thermal Printer](feature_thermal_printer.md#thermal-printer-keycodes)
   * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
 
-* Reference
-  * [Config Options](config_options.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
-  * [Glossary](reference_glossary.md)
-  * [Keymap Overview](keymap.md)
-  * [Unit Testing](unit_testing.md)
-
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)

docs/becoming_a_qmk_collaborator.md

@@ -1,7 +1,9 @@
-A QMK collaborator is a keyboard maker/designer that is interested in helping QMK grow and fully support their keyboard(s), and encouraging their users/customers to submit features, ideas, and keymaps. We're always looking to add more keyboards and collaborators, but we ask that they fulfill these requirements:
+# Becoming a QMK Collaborator
 
-* **Have a PCB available for sale** - unfortunately there's just too much variation and complications with handwired keyboards.
-* **Maintain the your keyboard's directory** - this may just require an initial setup to get your keyboard working, but it could also include accommodating changes made to QMK's core.
-* **Approve and merge your keyboard's keymap pull requests** - we like to encourage users to contribute their keymaps for others to see and work from when creating their own.
+A QMK collaborator is a keyboard maker or designer that is interested in helping QMK grow and fully support their keyboard(s), and encouraging their users and customers to submit features, ideas, and keymaps. We're always looking to add more keyboards and collaborators, but we ask that they fulfill these requirements:
+
+* **Have a PCB available for sale.** Unfortunately there's just too much variation and complications with handwired keyboards.
+* **Maintain your keyboard in QMK.** This may just require an initial setup to get your keyboard working, but it could also include accommodating changes made to QMK's core that might break or render any custom code redundant.
+* **Approve and merge keymap pull requests for your keyboard.** We like to encourage users to contribute their keymaps for others to see and work from when creating their own.
 
 If you feel you meet these requirements, shoot us an email at hello@qmk.fm with an introduction and some links to your keyboard!

docs/config_options.md

@@ -91,6 +91,8 @@ This is a C header file that is one of the first things included, and will persi
   * key combination that allows the use of magic commands (useful for debugging)
 * `#define USB_MAX_POWER_CONSUMPTION`
   * sets the maximum power (in mA) over USB for the device (default: 500)
+* `#define SCL_CLOCK 100000L`
+  * sets the SCL_CLOCK speed for split keyboards. The default is `100000L` but some boards can be set to `400000L`.
 
 ## Features That Can Be Disabled
 
@@ -126,14 +128,18 @@ If you define these options you will enable the associated feature, which may in
   * how long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too
 * `#define RETRO_TAPPING`
   * tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release
+  * See [Retro Tapping](feature_advanced_keycodes.md#retro-tapping) for details
 * `#define TAPPING_TOGGLE 2`
   * how many taps before triggering the toggle
 * `#define PERMISSIVE_HOLD`
   * makes tap and hold keys work better for fast typers who don't want tapping term set above 500
+  * See [Permissive Hold](feature_advanced_keycodes.md#permissive-hold) for details
 * `#define IGNORE_MOD_TAP_INTERRUPT`
   * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold
+  * See [Mod tap interrupt](feature_advanced_keycodes.md#mod-tap-interrupt) for details
 * `#define TAPPING_FORCE_HOLD`
   * makes it possible to use a dual role key as modifier shortly after having been tapped
+  * See [Hold after tap](feature_advanced_keycodes.md#hold-after-tap)
 * `#define LEADER_TIMEOUT 300`
   * how long before the leader key times out
 * `#define ONESHOT_TIMEOUT 300`
@@ -175,6 +181,16 @@ If you define these options you will enable the associated feature, which may in
 * `#define MOUSEKEY_MAX_SPEED 7`
 * `#define MOUSEKEY_WHEEL_DELAY 0`
 
+## Split Keyboard Options
+
+Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
+
+* `#define SPLIT_HAND_PIN B7`
+  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace 'B7' with the pin you are using. This is optional and you can still use the EEHANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+  
+* `#define USE_I2C`
+  * For using I2C instead of Serial (defaults to serial)
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.
@@ -183,6 +199,8 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
 
 * `DEFAULT_FOLDER`
   * Used to specify a default folder when a keyboard has more than one sub-folder.
+* `FIRMWARE_FORMAT`
+  * Defines which format (bin, hex) is copied to the root `qmk_firmware` folder after building.
 * `SRC`
   * Used to add files to the compilation/linking list.
 * `LAYOUTS`
@@ -228,3 +246,9 @@ Use these to enable or disable building certain features. The more you have enab
   * Unicode
 * `BLUETOOTH_ENABLE`
   * Enable Bluetooth with the Adafruit EZ-Key HID
+* `SPLIT_KEYBOARD`
+  * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+* `WAIT_FOR_USB`
+  * Forces the keyboard to wait for a USB connection to be established before it starts up
+* `NO_USB_STARTUP_CHECK`
+  * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.

docs/faq_keymap.md

@@ -11,8 +11,8 @@ Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_f
 
 There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JIS. North America primarily uses ANSI, Europe and Africa primarily use ISO, and Japan uses JIS. Regions not mentioned typically use either ANSI or ISO. The keycodes corresponding to these layouts are shown here:
 
-<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/9ce023dc6caadc0cf11c88c782350a8c -->
-![Keyboard Layout Image](https://i.imgur.com/45m4mRf.png)
+<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/070a530eedaed36a2d77f3f6fd455677 -->
+![Keyboard Layout Image](https://i.imgur.com/gvlNUpQ.png)
 
 ## Some Of My Keys Are Swapped Or Not Working
 
@@ -34,12 +34,11 @@ See [issue #168](https://github.com/tmk/tmk_keyboard/issues/168) and
 * http://en.wikipedia.org/wiki/Magic_SysRq_key
 * http://en.wikipedia.org/wiki/System_request
 
-## Power Key Doesn't Work
-Use `KC_PWR` instead of `KC_POWER` or vice versa.
-* `KC_PWR` works with Windows and Linux, not with OSX.
-* `KC_POWER` works with OSX and Linux, not with Windows.
+## Power Keys Aren't Working
 
-More info: http://geekhack.org/index.php?topic=14290.msg1327264#msg1327264
+Somewhat confusingly, there are two "Power" keycodes in QMK: `KC_POWER` in the Keyboard/Keypad HID usage page, and `KC_SYSTEM_POWER` (or `KC_PWR`) in the Consumer page.
+
+The former is only recognized on macOS, while the latter, `KC_SLEP` and `KC_WAKE` are supported by all three major operating systems, so it is recommended to use those instead. Under Windows, these keys take effect immediately, however on macOS they must be held down until a dialog appears.
 
 ## One Shot Modifier
 Solves my personal 'the' problem. I often got 'the' or 'THe' wrongly instead of 'The'.  One Shot Shift mitigates this for me.
@@ -87,14 +86,14 @@ On **Xorg** you can use `compose` key, instead.
 And see this for **Unicode** input.
 * http://en.wikipedia.org/wiki/Unicode_input
 
+## `Fn` Key on macOS
 
-## Apple/Mac Keyboard `Fn`
-Not supported.
+Unlike most Fn keys, the one on Apple keyboards actually has its own keycode... sort of. It takes the place of the sixth keycode in a basic 6KRO HID report -- so an Apple keyboard is in fact only 5KRO.
 
-Apple/Mac keyboard sends keycode for Fn unlike most of other keyboards.
-I think you can send Apple Fn key using Apple venter specific Page 0xff01 and usage 0x0003. But you have to change HID Report Descriptor for this, of course.
+It is technically possible to get QMK to send this key. However, doing so requires modification of the report format to add the state of the Fn key.
+Even worse, it is not recognized unless the keyboard's VID and PID match that of a real Apple keyboard. The legal issues that official QMK support for this feature may create mean it is unlikely to happen.
 
-https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/AppleHIDUsageTables.h
+See [this issue](https://github.com/qmk/qmk_firmware/issues/2179) for detailed information.
 
 
 ## Media Control Keys in Mac OSX

docs/feature_advanced_keycodes.md

@@ -1,6 +1,6 @@
 # Advanced Keycodes
 
-Your keymap can include keycodes that are more advanced than normal, for example shifted keys. This page documents the functions that are available to you.
+Your keymap can include keycodes that are more advanced than normal, for example keys that switch layers or send modifiers when held, but send regular keycodes when tapped. This page documents the functions that are available to you.
 
 ### Assigning Custom Names
 
@@ -13,9 +13,11 @@ People often define custom names using `#define`. For example:
 
 This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping it more readable.
 
-### Limits of These Aliases
+### Caveats
 
-Currently, the keycodes able to used with these functions are limited to the [Basic Keycodes](keycodes_basic.md), meaning you can't use keycodes like `KC_TILD`, or anything greater than 0xFF. For a full list of the keycodes able to be used see [Basic Keycodes](keycodes_basic.md).
+Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored.
+
+Additionally, if at least one right-handed modifier is specified in a Mod Tap or Layer Tap, it will cause all modifiers specified to become right-handed, so it is not possible to mix and match the two.
 
 # Switching and Toggling Layers
 
@@ -55,85 +57,73 @@ Sometimes, you might want to switch between layers in a macro or as part of a ta
 
 # Modifier Keys
 
-These functions allow you to combine a mod with a keycode. When pressed the keydown for the mod will be sent first, and then *kc* will be sent. When released the keyup for *kc* will be sent and then the mod will be sent.
+These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.
 
-* `LSFT(kc)` or `S(kc)` - applies left Shift to *kc* (keycode)
-* `RSFT(kc)` - applies right Shift to *kc*
-* `LCTL(kc)` - applies left Control to *kc*
-* `RCTL(kc)` - applies right Control to *kc*
-* `LALT(kc)` - applies left Alt to *kc*
-* `RALT(kc)` - applies right Alt to *kc*
-* `LGUI(kc)` - applies left GUI (command/win) to *kc*
-* `RGUI(kc)` - applies right GUI (command/win) to *kc*
-* `HYPR(kc)` - applies Hyper (all modifiers) to *kc*
-* `MEH(kc)`  - applies Meh (all modifiers except Win/Cmd) to *kc*
-* `LCAG(kc)` - applies CtrlAltGui to *kc*
+|Key       |Aliases               |Description                                         |
+|----------|----------------------|----------------------------------------------------|
+|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|                      |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
+|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
+|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
+|`ALTG(kc)`|                      |Hold Right Control and Alt and press `kc`           |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
 
-You can also chain these, like this:
+You can also chain them, for example `LCTL(LALT(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.
 
-    LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress.
+# Mod-Tap
 
-# Shifted Keycodes
+The Mod-Tap key `MT(mod, kc)` acts like a modifier when held, and a regular keycode when tapped. In other words, you can have a key that sends Escape when you tap it, but functions as a Control or Shift key when you hold it down.
 
-The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols.
+The modifiers this keycode and `OSM()` accept are prefixed with `MOD_`, not `KC_`:
 
-|Key                     |Aliases           |Description        |
-|------------------------|------------------|-------------------|
-|`KC_TILDE`              |`KC_TILD`         |`~`                |
-|`KC_EXCLAIM`            |`KC_EXLM`         |`!`                |
-|`KC_AT`                 |                  |`@`                |
-|`KC_HASH`               |                  |`#`                |
-|`KC_DOLLAR`             |`KC_DLR`          |`$`                |
-|`KC_PERCENT`            |`KC_PERC`         |`%`                |
-|`KC_CIRCUMFLEX`         |`KC_CIRC`         |`^`                |
-|`KC_AMPERSAND`          |`KC_AMPR`         |`&`                |
-|`KC_ASTERISK`           |`KC_ASTR`         |`*`                |
-|`KC_LEFT_PAREN`         |`KC_LPRN`         |`(`                |
-|`KC_RIGHT_PAREN`        |`KC_RPRN`         |`)`                |
-|`KC_UNDERSCORE`         |`KC_UNDS`         |`_`                |
-|`KC_PLUS`               |                  |`+`                |
-|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`         |`{`                |
-|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`         |`}`                |
-|`KC_PIPE`               |                  |<code>&#124;</code>|
-|`KC_COLON`              |`KC_COLN`         |`:`                |
-|`KC_DOUBLE_QUOTE`       |`KC_DQT`/`KC_DQUO`|`"`                |
-|`KC_LEFT_ANGLE_BRACKET` |`KC_LT`/`KC_LABK` |`<`                |
-|`KC_RIGHT_ANGLE_BRACKET`|`KC_GT`/`KC_RABK` |`>`                |
-|`KC_QUESTION`           |`KC_QUES`         |`?`                |
+|Modifier  |Description                             |
+|----------|----------------------------------------|
+|`MOD_LCTL`|Left Control                            |
+|`MOD_LSFT`|Left Shift                              |
+|`MOD_LALT`|Left Alt                                |
+|`MOD_LGUI`|Left GUI (Windows/Command/Meta key)     |
+|`MOD_RCTL`|Right Control                           |
+|`MOD_RSFT`|Right Shift                             |
+|`MOD_RALT`|Right Alt                               |
+|`MOD_RGUI`|Right GUI (Windows/Command/Meta key)    |
+|`MOD_HYPR`|Hyper (Left Control, Shift, Alt and GUI)|
+|`MOD_MEH` |Meh (Left Control, Shift, and Alt)      |
 
-# Mod Tap
+You can combine these by ORing them together like so:
 
-`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down.
+```c
+MT(MOD_LCTL | MOD_LSFT, KC_ESC)
+```
 
-These are the values you can use for the `mod` in `MT()` and `OSM()`:
+This key would activate Left Control and Left Shift when held, and send Escape when tapped.
 
-  * MOD_LCTL
-  * MOD_LSFT
-  * MOD_LALT
-  * MOD_LGUI
-  * MOD_RCTL
-  * MOD_RSFT
-  * MOD_RALT
-  * MOD_RGUI
-  * MOD_HYPR
-  * MOD_MEH
+For convenience, QMK includes some Mod-Tap shortcuts to make common combinations more compact in your keymap:
 
-These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped.
-
-We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact:
-
-  * `CTL_T(kc)` - is LCTL when held and *kc* when tapped
-  * `SFT_T(kc)` - is LSFT when held and *kc* when tapped
-  * `ALT_T(kc)` - is LALT when held and *kc* when tapped
-  * `ALGR_T(kc)` - is AltGr when held and *kc* when tapped
-  * `GUI_T(kc)` - is LGUI when held and *kc* when tapped
-  * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)
-  * `LCAG_T(kc)` - is CtrlAltGui when held and *kc* when tapped
-  * `MEH_T(kc)` - is like Hyper, but not as cool -- does not include the Cmd/Win key, so just sends Alt+Ctrl+Shift.
-
-?> Due to the way that keycodes are structured, any modifiers specified as part of `kc`, such as `LCTL()` or `KC_LPRN`, will only activate when held instead of tapped.
-
-?> Additionally, if there is at least one right modifier, any other modifiers will turn into their right equivalents, so it is not possible to "mix and match" the two.
+|Key         |Aliases                                |Description                                            |
+|------------|---------------------------------------|-------------------------------------------------------|
+|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
+|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
+|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
+|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
+|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
+|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
+|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
+|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
+|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
+|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
 
 # One Shot Keys
 
@@ -203,3 +193,9 @@ With default settings, `a` will be sent on the first release, then `a` will be s
 With `TAPPING_FORCE_HOLD`, the second press will be interpreted as a Shift, allowing to use it as a modifier shortly after having used it as a tap.
 
 !> `TAPPING_FORCE_HOLD` will break anything that uses tapping toggles (Such as the `TT` layer keycode, and the One Shot Tapping Toggle).
+
+# Retro Tapping
+
+When you hold a dual function key, and haven't pressed anything when you release the key, normally nothing happens.  However, if you enable this, if you release the key without pressing another key, it will send the original key, even if it is outside of the tapping term. 
+
+For instance, if you're using `LT(2, KC_SPACE)`, if you hold the key, don't hit anything else and then release it, normally, nothing happens. But with `RETRO_TAPPING` defined in your `config.h`, it will send `KC_SPACE`. 

docs/feature_audio.md

@@ -3,6 +3,7 @@
 Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any AVR keyboard that allows access to certain PWM-capable pins, you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
 
 Up to two simultaneous audio voices are supported, one driven by timer 1 and another driven by timer 3.  The following pins can be defined as audio outputs in config.h:
+
 Timer 1:
 `#define B5_AUDIO`
 `#define B6_AUDIO`
@@ -58,6 +59,13 @@ PLAY_LOOP(my_song);
 
 It's advised that you wrap all audio features in `#ifdef AUDIO_ENABLE` / `#endif` to avoid causing problems when audio isn't built into the keyboard.
 
+The available keycodes for audio are: 
+
+* `AU_ON` - Turn audio mode on
+* `AU_OFF` - Turn audio mode off
+* `AU_TOG` - Toggle audio mode
+
+
 ## Music Mode
 
 The music mode maps your columns to a chromatic scale, and your rows to octaves. This works best with ortholinear keyboards, but can be made to work with others. All keycodes less than `0xFF` get blocked, so you won't type while playing notes - if you have special keys/mods, those will still work. A work-around for this is to jump to a different layer with KC_NOs before (or after) enabling music mode.
@@ -145,6 +153,23 @@ You can configure the default, min and max frequencies, the stepping and built i
 
 This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile.
 
+
+## Audio Keycodes
+
+|Key             |Aliases  |Description                       |
+|----------------|---------|----------------------------------|
+|`AU_ON`         |         |Audio mode on                     |
+|`AU_OFF`        |         |Audio mode off                    |
+|`AU_TOG`        |         |Toggles Audio mode                |
+|`CLICKY_TOGGLE` |`CK_TOGG`|Toggles Audio clicky mode         |
+|`CLICKY_UP`     |`CK_UP`  |Increases frequency of the clicks |
+|`CLICKY_DOWN`   |`CK_DOWN`|Decreases frequency of the clicks |
+|`CLICKY_RESET`  |`CK_RST` |Resets frequency to default       |
+|`MU_ON`         |         |Turns on Music Mode               |
+|`MU_OFF`        |         |Turns off Music Mode              |
+|`MU_TOG`        |         |Toggles Music Mode                |
+|`MU_MOD`        |         |Cycles through the music modes    |
+
 <!-- FIXME: this formatting needs work
 
 ## Audio

docs/feature_backlight.md

@@ -1,10 +1,20 @@
 # Backlighting
 
-<!-- FIXME: Describe how backlighting works in QMK -->
+Many keyboards support backlit keys by way of individual LEDs placed through or underneath the keyswitches. QMK is able to control the brightness of these LEDs by switching them on and off rapidly in a certain ratio, a technique known as *Pulse Width Modulation*, or PWM. By altering the duty cycle of the PWM signal, it creates the illusion of dimming.
 
-## Backlight Keycodes
+The MCU can only supply so much current to its GPIO pins. Instead of powering the backlight directly from the MCU, the backlight pin is connected to a transistor or MOSFET that switches the power to the LEDs.
 
-These keycodes control the backlight. Most keyboards use this for single color in-switch lighting.
+## Usage
+
+Most keyboards have backlighting enabled by default if they support it, but if it is not working for you, check that your `rules.mk` includes the following:
+
+```make
+BACKLIGHT_ENABLE = yes
+```
+
+You should then be able to use the keycodes below to change the backlight level.
+
+## Keycodes
 
 |Key      |Description                               |
 |---------|------------------------------------------|
@@ -16,24 +26,47 @@ These keycodes control the backlight. Most keyboards use this for single color i
 |`BL_DEC` |Decrease the backlight level              |
 |`BL_BRTG`|Toggle backlight breathing                |
 
-Note that for backlight breathing, you need to have `#define BACKLIGHT_BREATHING` in your config.h.
+## Caveats
 
-## Configuration Options in `config.h`
+This feature is distinct from both the [RGB underglow](feature_rgblight.md) and [RGB matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously use multiple different coloured LEDs on a keyboard.
 
-* `BACKLIGHT_PIN B7` defines the pin that controlls the LEDs. Unless you design your own keyboard, you don't need to set this.
-* `BACKLIGHT_LEVELS 3` defines the number of brightness levels (maximum 15 excluding off).
-* `BACKLIGHT_BREATHING` if defined, enables backlight breathing. Note that this is only available if `BACKLIGHT_PIN` is B5, B6 or B7.
-* `BREATHING_PERIOD 6` defines the length of one backlight "breath" in seconds.
+Hardware PWM is only supported on certain pins of the MCU, so if the backlighting is not connected to one of them, a software implementation will be used, and backlight breathing will not be available. Currently the supported pins are `B5`, `B6`, `B7`, and `C6`.
 
-## Notes on Implementation
+## Configuration
 
-To change the brightness when using pins B5, B6 or B7, the PWM (Pulse Width Modulation) functionality of the on-chip timer is used.
-The timer is a counter that counts up to a certain TOP value (`0xFFFF` set in ICR1) before resetting to 0.
-We also set an OCR1x register.
-When the counter reaches the value stored in that register, the PWM pin drops to low.
-The PWM pin is pulled high again when the counter resets to 0.
-Therefore, OCR1x basically sets the duty cycle of the LEDs and as such the brightness where `0` is the darkest and `0xFFFF` the brightest setting.
+To change the behaviour of the backlighting, `#define` these in your `config.h`:
 
-To enable the breathing effect, we register an interrupt handler to be called whenever the counter resets (with `ISR(TIMER1_OVF_vect)`).
-In this handler, which gets called roughly 244 times per second, we compute the desired brightness using a precomputed brightness curve.
-To disable breathing, we can just disable the respective interrupt vector and reset the brightness to the desired level.
+|Define               |Default      |Description                                                                                                  |
+|---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
+|`BACKLIGHT_PIN`      |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
+|`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 15 excluding off)                                                   |
+|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if hardware PWM is used                                                          |
+|`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
+
+## Hardware PWM Implementation
+
+When using the supported pins for backlighting, QMK will use a hardware timer configured to output a PWM signal. This timer will count up to `ICRx` (by default `0xFFFF`) before resetting to 0.
+The desired brightness is calculated and stored in the `OCRxx` register. When the counter reaches this value, the backlight pin will go low, and is pulled high again when the counter resets.
+In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus the brightness, where `0x0000` is completely off and `0xFFFF` is completely on.
+
+The breathing effect is achieved by registering an interrupt handler for `TIMER1_OVF_vect` that is called whenever the counter resets, roughly 244 times per second.
+In this handler, the value of an incrementing counter is mapped onto a precomputed brightness curve. To turn off breathing, the interrupt handler is simply disabled, and the brightness reset to the level stored in EEPROM.
+
+## Backlight Functions
+
+|Function  |Description                                               |
+|----------|----------------------------------------------------------|
+|`backlight_toggle()`   |Turn the backlight on or off                 |
+|`backlight_step()`     |Cycle through backlight levels               |
+|`backlight_increase()` |Increase the backlight level                 |
+|`backlight_decrease()` |Decrease the backlight level                 |
+|`backlight_level(x)`   |Sets the backlight level to specified level  |
+|`get_backlight_level()`|Toggle backlight breathing                   |
+
+### Backlight Breathing Functions
+
+|Function  |Description                                               |
+|----------|----------------------------------------------------------|
+|`breathing_toggle()`  |Turn the backlight breathing on or off        |
+|`breathing_enable()`  |Turns on backlight breathing                  |
+|`breathing_disable()` |Turns off backlight breathing                 |

docs/feature_bootmagic.md

@@ -1,89 +1,100 @@
-# Bootmagic and Magic Keycodes
+# Bootmagic
 
-There are 3 separate but related features that allow you to change the behavior of your keyboard without reflashing. While each of them have similar functionality you access that functionality in different ways depending on how your keyboard is configured.
+There are three separate but related features that allow you to change the behavior of your keyboard without reflashing. While each of them have similar functionality, it is accessed in different ways depending on how your keyboard is configured.
 
-Bootmagic is a system for configuring your keyboard while it initializes. To trigger a Bootmagic command you hold down the bootmagic key (`KC_SPACE` on most keyboards) and one or more command keys.
+**Bootmagic** is a system for configuring your keyboard while it initializes. To trigger a Bootmagic command, hold down the Bootmagic key and one or more command keys.
 
-Bootmagic Keycodes allow you to access the Bootmagic functionality after your keyboard has initialized. To use Bootmagic Keycodes you assign keycodes starting with `MAGIC_`, much in the same way you define any other key.
+**Bootmagic Keycodes** are prefixed with `MAGIC_`, and allow you to access the Bootmagic functionality *after* your keyboard has initialized. To use the keycodes, assign them to your keymap as you would any other keycode.
 
-Command is a feature that allows you to control different aspects of your keyboard. Command used to be called Magic. Command is typically accessed by holding Left and Right Shift at the same time, although that can be customized. While it shares some functionality with Bootmagic it also allows you to access functionality that Bootmagic does not. For more information see the [Command](feature_command.md) documentation page.
+**Command**, formerly known as **Magic**, is another feature that allows you to control different aspects of your keyboard. While it shares some functionality with Bootmagic, it also allows you to do things that Bootmagic does not, such as printing version information to the console. For more information, see [Command](feature_command.md).
 
-## Enabling Bootmagic
+On some keyboards Bootmagic is disabled by default. If this is the case, it must be explicitly enabled in your `rules.mk` with:
 
-Bootmagic is disabled by default. To use Bootmagic you need to enable it in your `rules.mk` file:
+```make
+BOOTMAGIC_ENABLE = yes
+```
 
-    BOOTMAGIC_ENABLE = yes
+## Hotkeys
 
-## Bootmagic Hotkeys and Keycodes
+Hold down the Bootmagic key (Space by default) and the desired hotkey while plugging in your keyboard. For example, holding Space+`B` should cause it to enter the bootloader.
 
-This table describes the default Hotkeys for Bootmagic and the Keycodes for Magic. These may be overriden at the Keyboard or Keymap level. Some functionality is not available in both methods.
+|Hotkey            |Description                                  |
+|------------------|---------------------------------------------|
+|Escape            |Ignore Bootmagic configuration in EEPROM     |
+|`B`               |Enter the bootloader                         |
+|`D`               |Toggle debugging over serial                 |
+|`X`               |Toggle key matrix debugging                  |
+|`K`               |Toggle keyboard debugging                    |
+|`M`               |Toggle mouse debugging                       |
+|Backspace         |Clear the EEPROM                             |
+|Caps Lock         |Toggle treating Caps Lock as Left Control    |
+|Left Control      |Toggle swapping Caps Lock and Left Control   |
+|Left Alt          |Toggle swapping Left Alt and Left GUI        |
+|Right Alt         |Toggle swapping Right Alt and Right GUI      |
+|Left GUI          |Toggle the GUI keys (useful when gaming)     |
+|<code>&#96;</code>|Toggle swapping <code>&#96;</code> and Escape|
+|`\`               |Toggle swapping `\` and Backspace            |
+|`N`               |Toggle N-Key Rollover (NKRO)                 |
+|`0`               |Make layer 0 the default layer               |
+|`1`               |Make layer 1 the default layer               |
+|`2`               |Make layer 2 the default layer               |
+|`3`               |Make layer 3 the default layer               |
+|`4`               |Make layer 4 the default layer               |
+|`5`               |Make layer 5 the default layer               |
+|`6`               |Make layer 6 the default layer               |
+|`7`               |Make layer 7 the default layer               |
 
-To use the Hotkey hold down `BOOTMAGIC_KEY_SALT` (`KC_SPACE` by default) and the Hotkey while plugging in your keyboard. To use the Keycode assign that keycode to a layer. For example, if you hold down Space+B while plugging in most keyboards, you will enter bootloader mode.
+## Keycodes
 
-|Hotkey     |Keycode                           |Description                                             |
-|-----------|----------------------------------|--------------------------------------------------------|
-|`ESC`      |                                  |Skip bootmagic and saved eeprom configuration           |
-|`B`        |`RESET`                           |Enter bootloader instead of firmware                    |
-|`D`        |`DEBUG`                           |Enable debugging (writes messages to serial)            |
-|`X`        |                                  |Enable matrix debugging                                 |
-|`K`        |                                  |Enable keyboard debugging                               |
-|`M`        |                                  |Enable mouse debugging                                  |
-|`BACKSPACE`|                                  |Clear the saved settings from flash                     |
-|`CAPSLOCK` |`MAGIC_CAPSLOCK_TO_CONTROL`       |Treat `Capslock` as `Control`                           |
-|           |`MAGIC_UNCAPSLOCK_TO_CONTROL`     |Stop treating CapsLock as Control                       |
-|`LCTRL`    |`MAGIC_SWAP_CONTROL_CAPSLOCK`     |Swap `Control` and `Capslock`                           |
-|           |`MAGIC_UNSWAP_CONTROL_CAPSLOCK`   |Unswap Left Control and Caps Lock                       |
-|           |`MAGIC_SWAP_ALT_GUI`              |Swap Alt and GUI on both sides                          |
-|           |`MAGIC_UNSWAP_ALT_GUI`            |Unswap Left Alt and GUI                                 |
-|`LALT`     |`MAGIC_SWAP_LALT_LGUI`            |Swap Left `Alt` and `GUI`, e.g. for OSX Opt and Cmd     |
-|           |`MAGIC_UNSWAP_LALT_LGUI`          |Unswap Left Alt and GUI                                 |
-|`RALT`     |`MAGIC_SWAP_RALT_RGUI`            |Swap Right `Alt` and `GUI`                              |
-|           |`MAGIC_UNSWAP_RALT_RGUI`          |Unswap Right Alt and GUI                                |
-|`LGUI`     |`MAGIC_NO_GUI`                    |Disable GUI key - e.g. disable Windows key during gaming|
-|           |`MAGIC_UNNO_GUI`                  |Enable the GUI key                                      |
-|`GRAVE`    |`MAGIC_SWAP_GRAVE_ESC`            |Swap `\`~` and `ESC`                                    |
-|           |`MAGIC_UNSWAP_GRAVE_ESC`          |Unswap `\`~` and Escape                                 |
-|`BACKSLASH`|`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |Swap Blackslash and Backspace                           |
-|           |`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|Unswap Backslash and Backspace                          |
-|`N`        |`MAGIC_HOST_NKRO`                 |Force N-Key Rollover (NKRO) on                          |
-|           |`MAGIC_UNHOST_NKRO`               |Force NKRO off                                          |
-|           |`MAGIC_TOGGLE_NKRO`               |Toggle NKRO on or off                                   |
-|`0`        |`DF(0)`                           |Make Layer 0 the default layer at bootup                |
-|`1`        |`DF(1)`                           |Make Layer 1 the default layer at bootup                |
-|`2`        |`DF(2)`                           |Make Layer 2 the default layer at bootup                |
-|`3`        |`DF(3)`                           |Make Layer 3 the default layer at bootup                |
-|`4`        |`DF(4)`                           |Make Layer 4 the default layer at bootup                |
-|`5`        |`DF(5)`                           |Make Layer 5 the default layer at bootup                |
-|`6`        |`DF(6)`                           |Make Layer 6 the default layer at bootup                |
-|`7`        |`DF(7)`                           |Make Layer 7 the default layer at bootup                |
+|Keycode                           |Aliases  |Description                               |
+|----------------------------------|---------|------------------------------------------|
+|`MAGIC_CAPSLOCK_TO_CONTROL`       |         |Treat Caps Lock as Left Control           |
+|`MAGIC_UNCAPSLOCK_TO_CONTROL`     |         |Stop treating Caps Lock as Left Control   |
+|`MAGIC_HOST_NKRO`                 |         |Force N-Key Rollover (NKRO) on            |
+|`MAGIC_UNHOST_NKRO`               |         |Force NKRO off                            |
+|`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                       |
+|`MAGIC_NO_GUI`                    |         |Disable the GUI keys (useful when gaming) |
+|`MAGIC_UNNO_GUI`                  |         |Enable the GUI keys                       |
+|`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides (for macOS)|
+|`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Left Alt and Left GUI              |
+|`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace                    |
+|`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace                  |
+|`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Left Control and Caps Lock           |
+|`MAGIC_UNSWAP_CONTROL_CAPSLOCK`   |         |Unswap Left Control and Caps Lock         |
+|`MAGIC_SWAP_GRAVE_ESC`            |         |Swap <code>&#96;</code> and Escape        |
+|`MAGIC_UNSWAP_GRAVE_ESC`          |         |Unswap <code>&#96;</code> and Escape      |
+|`MAGIC_SWAP_LALT_LGUI`            |         |Swap Left Alt and Left GUI                |
+|`MAGIC_UNSWAP_LALT_LGUI`          |         |Unswap Left Alt and Left GUI              |
+|`MAGIC_SWAP_RALT_RGUI`            |         |Swap Right Alt and Right GUI              |
+|`MAGIC_UNSWAP_RALT_RGUI`          |         |Unswap Right Alt and Right GUI            |
 
-## Bootmagic Configuration
+## Configuration
 
-When setting up your keyboard and/or keymap there are a number of `#define`s that control the behavior of Bootmagic. To use these put them in your `config.h`, either at the keyboard or keymap level.
+If you would like to change the hotkey assignments for Bootmagic, `#define` these in your `config.h` at either the keyboard or keymap level.
 
-|Define |Default|Description |
-|-------|-------|------------|
-|`BOOTMAGIC_KEY_SALT`|`KC_SPACE`|The key to hold down to trigger Bootmagic during initialization.|
-|`BOOTMAGIC_KEY_SKIP`|`KC_ESC`|The Hotkey to ignore saved eeprom configuration.|
-|`BOOTMAGIC_KEY_EEPROM_CLEAR`|`KC_BSPACE`|The hotkey to clear the saved eeprom configuration.|
-|`BOOTMAGIC_KEY_BOOTLOADER`|`KC_B`|The hotkey to enter the bootloader.|
-|`BOOTMAGIC_KEY_DEBUG_ENABLE`|`KC_D`|The hotkey to enable debug mode.|
-|`BOOTMAGIC_KEY_DEBUG_MATRIX`|`KC_X`|The hotkey to enable matrix debugging mode.|
-|`BOOTMAGIC_KEY_DEBUG_KEYBOARD`|`KC_K`|The hotkey to enable keyboard debugging mode.|
-|`BOOTMAGIC_KEY_DEBUG_MOUSE`|`KC_M`|The hotkey to enable mouse debugging mode.|
-|`BOOTMAGIC_KEY_SWAP_CONTROL_CAPSLOCK`|`KC_LCTRL`||
-|`BOOTMAGIC_KEY_CAPSLOCK_TO_CONTROL`|`KC_CAPSLOCK`||
-|`BOOTMAGIC_KEY_SWAP_LALT_LGUI`|`KC_LALT`||
-|`BOOTMAGIC_KEY_SWAP_RALT_RGUI`|`KC_RALT`||
-|`BOOTMAGIC_KEY_NO_GUI`|`KC_LGUI`||
-|`BOOTMAGIC_KEY_SWAP_GRAVE_ESC`|`KC_GRAVE`||
-|`BOOTMAGIC_KEY_SWAP_BACKSLASH_BACKSPACE`|`KC_BSLASH`||
-|`BOOTMAGIC_HOST_NKRO`|`KC_N`||
-|`BOOTMAGIC_KEY_DEFAULT_LAYER_0`|`KC_0`|Hotkey to set Layer 0 as the default layer|
-|`BOOTMAGIC_KEY_DEFAULT_LAYER_1`|`KC_1`|Hotkey to set Layer 1 as the default layer|
-|`BOOTMAGIC_KEY_DEFAULT_LAYER_2`|`KC_2`|Hotkey to set Layer 2 as the default layer|
-|`BOOTMAGIC_KEY_DEFAULT_LAYER_3`|`KC_3`|Hotkey to set Layer 3 as the default layer|
-|`BOOTMAGIC_KEY_DEFAULT_LAYER_4`|`KC_4`|Hotkey to set Layer 4 as the default layer|
-|`BOOTMAGIC_KEY_DEFAULT_LAYER_5`|`KC_5`|Hotkey to set Layer 5 as the default layer|
-|`BOOTMAGIC_KEY_DEFAULT_LAYER_6`|`KC_6`|Hotkey to set Layer 6 as the default layer|
-|`BOOTMAGIC_KEY_DEFAULT_LAYER_7`|`KC_7`|Hotkey to set Layer 7 as the default layer|
+|Define                                  |Default      |Description                                        |
+|----------------------------------------|-------------|---------------------------------------------------|
+|`BOOTMAGIC_KEY_SALT`                    |`KC_SPACE`   |The Bootmagic key                                  |
+|`BOOTMAGIC_KEY_SKIP`                    |`KC_ESC`     |Ignore Bootmagic configuration in EEPROM           |
+|`BOOTMAGIC_KEY_EEPROM_CLEAR`            |`KC_BSPACE`  |Clear the EEPROM configuration                     |
+|`BOOTMAGIC_KEY_BOOTLOADER`              |`KC_B`       |Enter the bootloader                               |
+|`BOOTMAGIC_KEY_DEBUG_ENABLE`            |`KC_D`       |Toggle debugging over serial                       |
+|`BOOTMAGIC_KEY_DEBUG_MATRIX`            |`KC_X`       |Toggle matrix debugging                            |
+|`BOOTMAGIC_KEY_DEBUG_KEYBOARD`          |`KC_K`       |Toggle keyboard debugging                          |
+|`BOOTMAGIC_KEY_DEBUG_MOUSE`             |`KC_M`       |Toggle mouse debugging                             |
+|`BOOTMAGIC_KEY_SWAP_CONTROL_CAPSLOCK`   |`KC_LCTRL`   |Swap Left Control and Caps Lock                    |
+|`BOOTMAGIC_KEY_CAPSLOCK_TO_CONTROL`     |`KC_CAPSLOCK`|Toggle treating Caps Lock as Left Control          |
+|`BOOTMAGIC_KEY_SWAP_LALT_LGUI`          |`KC_LALT`    |Toggle swapping Left Alt and Left GUI (for macOS)  |
+|`BOOTMAGIC_KEY_SWAP_RALT_RGUI`          |`KC_RALT`    |Toggle swapping Right Alt and Right GUI (for macOS)|
+|`BOOTMAGIC_KEY_NO_GUI`                  |`KC_LGUI`    |Toggle the GUI keys (useful when gaming)           |
+|`BOOTMAGIC_KEY_SWAP_GRAVE_ESC`          |`KC_GRAVE`   |Toggle swapping <code>&#96;</code> and Escape      |
+|`BOOTMAGIC_KEY_SWAP_BACKSLASH_BACKSPACE`|`KC_BSLASH`  |Toggle swapping `\` and Backspace                  |
+|`BOOTMAGIC_HOST_NKRO`                   |`KC_N`       |Toggle N-Key Rollover (NKRO)                       |
+|`BOOTMAGIC_KEY_DEFAULT_LAYER_0`         |`KC_0`       |Make layer 0 the default layer                     |
+|`BOOTMAGIC_KEY_DEFAULT_LAYER_1`         |`KC_1`       |Make layer 1 the default layer                     |
+|`BOOTMAGIC_KEY_DEFAULT_LAYER_2`         |`KC_2`       |Make layer 2 the default layer                     |
+|`BOOTMAGIC_KEY_DEFAULT_LAYER_3`         |`KC_3`       |Make layer 3 the default layer                     |
+|`BOOTMAGIC_KEY_DEFAULT_LAYER_4`         |`KC_4`       |Make layer 4 the default layer                     |
+|`BOOTMAGIC_KEY_DEFAULT_LAYER_5`         |`KC_5`       |Make layer 5 the default layer                     |
+|`BOOTMAGIC_KEY_DEFAULT_LAYER_6`         |`KC_6`       |Make layer 6 the default layer                     |
+|`BOOTMAGIC_KEY_DEFAULT_LAYER_7`         |`KC_7`       |Make layer 7 the default layer                     |

docs/feature_command.md

@@ -1,52 +1,50 @@
-# Command (Formerly known as Magic)
+# Command
 
-Command is a way to change your keyboard's behavior without having to flash or unplug it to use [Bootmagic](feature_bootmagic.md). There is a lot of overlap between this functionality and the [Bootmagic Keycodes](feature_bootmagic.md). Whenever possible we encourage you to use that functionality instead of Command.
+Command, formerly known as Magic, is a way to change your keyboard's behavior without having to flash or unplug it to use [Bootmagic](feature_bootmagic.md). There is a lot of overlap between this functionality and the [Bootmagic Keycodes](feature_bootmagic.md#keycodes). Wherever possible we encourage you to use that feature instead of Command.
 
-## Enabling Command
+On some keyboards Command is disabled by default. If this is the case, it must be explicitly enabled in your `rules.mk`:
 
-By default Command is disabled. You can enable it in your `rules.mk` file:
-
-    COMMAND_ENABLE = yes
+```make
+COMMAND_ENABLE = yes
+```
 
 ## Usage
 
-To use Command you hold down the key combination defined by `IS_COMMAND`. By default that combination is both shift keys. While holding the key combination press the key corresponding to the command you want.
-
-For example, to write the current QMK version to the QMK Toolbox console, you can press `Left Shift`+`Right Shift`+`V`.
+To use Command, hold down the key combination defined by the `IS_COMMAND()` macro. By default this is Left Shift+Right Shift. Then, press the key corresponding to the command you want. For example, to output the current QMK version to the QMK Toolbox console, press Left Shift+Right Shift+`V`.
 
 ## Configuration
 
-The following values can be defined in `config.h` to control the behavior of Command.
+If you would like to change the key assignments for Command, `#define` these in your `config.h` at either the keyboard or keymap level. All keycode assignments here must omit the `KC_` prefix.
 
-|Define |Default | Description |
-|-------|--------|-------------|
-|`IS_COMMAND()`                      |`(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))`|Key combination to activate Command|
-|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                |Do layer switching with Function row|
-|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                |Do layer switching with number keys.|
-|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                               |Do layer switching with custom keys (`MAGIC_KEY_LAYER0..9` below.)|
-|`MAGIC_KEY_HELP1`                   |`H`                                                                   |Show help.|
-|`MAGIC_KEY_HELP2`                   |`SLASH`                                                               |Show help.|
-|`MAGIC_KEY_DEBUG`                   |`D`                                                                   |Turn on debug mode.|
-|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                   |Turn on matrix debugging.|
-|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                   |Turn on keyboard debugging.|
-|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                   |Turn on mouse debugging.|
-|`MAGIC_KEY_VERSION`                 |`V`                                                                   |Write the QMK version to the console|
-|`MAGIC_KEY_STATUS`                  |`S`                                                                   |Show the current keyboard status|
-|`MAGIC_KEY_CONSOLE`                 |`C`                                                                   |Enable the Command Console|
-|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                 |Alternate access to layer 0|
-|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                               |Alternate access to layer 0|
-|`MAGIC_KEY_LAYER0`                  |`0`                                                                   |Change default layer to 0|
-|`MAGIC_KEY_LAYER1`                  |`1`                                                                   |Change default layer to 1|
-|`MAGIC_KEY_LAYER2`                  |`2`                                                                   |Change default layer to 2|
-|`MAGIC_KEY_LAYER3`                  |`3`                                                                   |Change default layer to 3|
-|`MAGIC_KEY_LAYER4`                  |`4`                                                                   |Change default layer to 4|
-|`MAGIC_KEY_LAYER5`                  |`5`                                                                   |Change default layer to 5|
-|`MAGIC_KEY_LAYER6`                  |`6`                                                                   |Change default layer to 6|
-|`MAGIC_KEY_LAYER7`                  |`7`                                                                   |Change default layer to 7|
-|`MAGIC_KEY_LAYER8`                  |`8`                                                                   |Change default layer to 8|
-|`MAGIC_KEY_LAYER9`                  |`9`                                                                   |Change default layer to 9|
-|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                               |Exit keyboard and enter bootloader|
-|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                |Lock the keyboard so nothing can be typed|
-|`MAGIC_KEY_EEPROM`                  |`E`                                                                   |Erase EEPROM settings|
-|`MAGIC_KEY_NKRO`                    |`N`                                                                   |Toggle NKRO on/off|
-|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                   |Toggle LED when computer is sleeping on/off|
+|Define                              |Default                                                                               |Description                                     |
+|------------------------------------|--------------------------------------------------------------------------------------|------------------------------------------------|
+|`IS_COMMAND()`                      |<code>(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                                |Set default layer with the Function row         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                                |Set default layer with the number keys          |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                               |Set default layer with `MAGIC_KEY_LAYER0..9`    |
+|`MAGIC_KEY_DEBUG`                   |`D`                                                                                   |Toggle debugging over serial                    |
+|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                                   |Toggle key matrix debugging                     |
+|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                                   |Toggle keyboard debugging                       |
+|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                                   |Toggle mouse debugging                          |
+|`MAGIC_KEY_CONSOLE`                 |`C`                                                                                   |Enable the Command console                      |
+|`MAGIC_KEY_VERSION`                 |`V`                                                                                   |Print the running QMK version to the console    |
+|`MAGIC_KEY_STATUS`                  |`S`                                                                                   |Print the current keyboard status to the console|
+|`MAGIC_KEY_HELP1`                   |`H`                                                                                   |Print Command help to the console               |
+|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                               |Print Command help to the console (alternate)   |
+|`MAGIC_KEY_LAYER0`                  |`0`                                                                                   |Make layer 0 the default layer                  |
+|`MAGIC_KEY_LAYER1`                  |`1`                                                                                   |Make layer 1 the default layer                  |
+|`MAGIC_KEY_LAYER2`                  |`2`                                                                                   |Make layer 2 the default layer                  |
+|`MAGIC_KEY_LAYER3`                  |`3`                                                                                   |Make layer 3 the default layer                  |
+|`MAGIC_KEY_LAYER4`                  |`4`                                                                                   |Make layer 4 the default layer                  |
+|`MAGIC_KEY_LAYER5`                  |`5`                                                                                   |Make layer 5 the default layer                  |
+|`MAGIC_KEY_LAYER6`                  |`6`                                                                                   |Make layer 6 the default layer                  |
+|`MAGIC_KEY_LAYER7`                  |`7`                                                                                   |Make layer 7 the default layer                  |
+|`MAGIC_KEY_LAYER8`                  |`8`                                                                                   |Make layer 8 the default layer                  |
+|`MAGIC_KEY_LAYER9`                  |`9`                                                                                   |Make layer 9 the default layer                  |
+|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                                 |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                               |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                               |Enter the bootloader                            |
+|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                                |Lock the keyboard so nothing can be typed       |
+|`MAGIC_KEY_EEPROM`                  |`E`                                                                                   |Clear the EEPROM                                |
+|`MAGIC_KEY_NKRO`                    |`N`                                                                                   |Toggle N-Key Rollover (NKRO)                    |
+|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                                   |Toggle LED when computer is sleeping            |

docs/feature_dynamic_macros.md

@@ -4,10 +4,10 @@ QMK supports temporary macros created on the fly. We call these Dynamic Macros.
 
 You can store one or two macros and they may have a combined total of 128 keypresses. You can increase this size at the cost of RAM.
 
-To enable them, first add a new element to the `planck_keycodes` enum — `DYNAMIC_MACRO_RANGE`:
+To enable them, first add a new element to the end of your `keycodes` enum — `DYNAMIC_MACRO_RANGE`:
 
 ```c
-enum planck_keycodes {
+enum keycodes {
 	QWERTY = SAFE_RANGE,
 	COLEMAK,
 	DVORAK,
@@ -20,7 +20,7 @@ enum planck_keycodes {
 };
 ```
 
-It must be the last element because `dynamic_macros.h` will add some more keycodes after it.
+Your `keycodes` enum may have a slightly different name. You must add `DYNAMIC_MACRO_RANGE` as the last element because `dynamic_macros.h` will add some more keycodes after it.
 
 Below it, include the `dynamic_macro.h` header:
 

docs/feature_grave_esc.md

@@ -1,17 +1,24 @@
 # Grave Escape
 
-Grave Escape is a feature that allows you to share the grave key (<code>&#96;</code> and `~`) on the same key as Escape. When `KC_GESC` is used it will act as `KC_ESC`, unless Shift or GUI is pressed, in which case it will act as `KC_GRAVE`.
+If you're using a 60% keyboard, or any other layout with no F-row, you will have noticed that there is no dedicated Escape key. Grave Escape is a feature that allows you to share the grave key (<code>&#96;</code> and `~`) with Escape.
 
+## Usage
+
+Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. When pressed it will behave like `KC_ESC`, but with Shift or GUI held it will send `KC_GRAVE`.
+
+## Keycodes
 
 |Key      |Aliases    |Description                                                       |
 |---------|-----------|------------------------------------------------------------------|
 |`KC_GESC`|`GRAVE_ESC`|Escape when pressed, <code>&#96;</code> when Shift or GUI are held|
 
-There are several possible key combinations this will break, among them Ctrl+Shift+Esc on Windows and Cmd+Opt+Esc on macOS. You can use these options in your `config.h` to work around this:
+## Configuration
 
-| Option | Description |
-|--------|-------------|
-| `GRAVE_ESC_ALT_OVERRIDE` | Always send Escape if Alt is pressed. |
-| `GRAVE_ESC_CTRL_OVERRIDE` | Always send Escape if Ctrl is pressed. |
-| `GRAVE_ESC_GUI_OVERRIDE` | Always send Escape if GUI is pressed. |
-| `GRAVE_ESC_SHIFT_OVERRIDE` | Always send Escape if SHIFT is pressed. |
+There are several possible key combinations this will break, among them Control+Shift+Escape on Windows and Command+Option+Escape on macOS. To work around this, you can `#define` these options in your `config.h`:
+
+|Define                    |Description                              |
+|--------------------------|-----------------------------------------|
+|`GRAVE_ESC_ALT_OVERRIDE`  |Always send Escape if Alt is pressed     |
+|`GRAVE_ESC_CTRL_OVERRIDE` |Always send Escape if Control is pressed |
+|`GRAVE_ESC_GUI_OVERRIDE`  |Always send Escape if GUI is pressed     |
+|`GRAVE_ESC_SHIFT_OVERRIDE`|Always send Escape if Shift is pressed   |

docs/feature_key_lock.md

@@ -1,11 +1,22 @@
-## Key Lock: Holding Down Keys for You
+# Key Lock
 
-Sometimes, you need to hold down a specific key for a long period of time. Whether this is while typing in ALL CAPS, or playing a video game that hasn't implemented auto-run, Key Lock is here to help. Key Lock adds a new keycode, `KC_LOCK`, that will hold down the next key you hit for you. The key is released when you hit it again. Here's an example: let's say you need to type in all caps for a few sentences. You hit KC_LOCK, and then shift. Now, shift will be considered held until you hit it again. You can think of key lock as caps lock, but supercharged.
+Sometimes you may find yourself needing to hold down a specific key for a long period of time. Key Lock holds down the next key you press for you. Press it again, and it will be released.
 
-Here's how to use it:
+Let's say you need to type in ALL CAPS for a few sentences. Hit `KC_LOCK`, and then Shift. Now, Shift will be considered held until you tap it again. You can think of Key Lock as Caps Lock, but supercharged.
 
-1. Pick a key on your keyboard. This will be the key lock key. Assign it the keycode `KC_LOCK`. This will be a single-action key: you won't be able to use it for anything else.
-2. Enable key lock by including `KEY_LOCK_ENABLE = yes` in your Makefile.
-3. That's it!
+## Usage
 
-Important: switching layers does not cancel the key lock. Additionally, key lock is only able to hold standard action keys and One Shot modifier keys (for example, if you have your shift defined as `OSM(KC_LSFT)`; see [One Shot Keys](quantum_keycodes.md#one-shot-keys)). This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as KC_LPRN. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held. If it's not, then it can't be.
+First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Then pick a key in your keymap and assign it the keycode `KC_LOCK`.
+
+## Keycodes
+
+|Keycode  |Description                                                   |
+|---------|--------------------------------------------------------------|
+|`KC_LOCK`|Hold down the next key pressed, until the key is pressed again|
+
+## Caveats
+
+Key Lock is only able to hold standard action keys and [One Shot modifier](quantum_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
+This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held.
+
+Switching layers will not cancel the Key Lock.

docs/feature_layouts.md

@@ -53,6 +53,8 @@ but the `LAYOUT_<layout>` variable must be defined in `<folder>.h` as well.
 
 ## Tips for Making Layouts Keyboard-Agnostic
 
+### Includes
+
 Instead of using `#include "planck.h"`, you can use this line to include whatever `<keyboard>.h` (`<folder>.h` should not be included here) file that is being compiled:
 
     #include QMK_KEYBOARD_H
@@ -72,3 +74,7 @@ For example:
 ```
 
 Note that the names are lowercase and match the folder/file names for the keyboard/revision exactly.
+
+### Keymaps
+
+In order to support both split and non-split keyboards with the same layout, you need to use the keyboard agnostic `LAYOUT_<layout name>` macro in your keymap. For instance, in order for a Let's Split and Planck to share the same layout file, you need to use `LAYOUT_ortho_4x12` instead of `LAYOUT_planck_grid` or just `{}` for a C array.

docs/feature_rgb_matrix.md

@@ -1,8 +1,12 @@
 # RGB Matrix Lighting
 
+## Driver configuration
+
+### IS31FL3731
+
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
 
-    RGB_MATRIX_ENABLE = yes
+    RGB_MATRIX_ENABLE = IS31FL3731
 
 Configure the hardware via your `config.h`:
 
@@ -36,7 +40,51 @@ Define these arrays listing all the LEDs in your `<keyboard>.c`:
 	    ....
 	}
 
-Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf). The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
+
+###  IS31FL3733
+
+There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
+
+    RGB_MATRIX_ENABLE = IS31FL3733
+
+Configure the hardware via your `config.h`:
+
+	// This is a 7-bit address, that gets left-shifted and bit 0
+	// set to 0 for write, 1 for read (as per I2C protocol)
+	// The address will vary depending on your wiring:
+	// 00 <-> GND
+	// 01 <-> SCL
+	// 10 <-> SDA
+	// 11 <-> VCC
+	// ADDR1 represents A1:A0 of the 7-bit address.
+	// ADDR2 represents A3:A2 of the 7-bit address.
+	// The result is: 0b101(ADDR2)(ADDR1)
+	#define DRIVER_ADDR_1 0b1010000
+	#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+
+	#define DRIVER_COUNT 1
+	#define DRIVER_1_LED_TOTAL 64
+	#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+
+Currently only a single drivers is supported, but it would be trivial to support all 4 combinations. For now define `DRIVER_ADDR_2` as `DRIVER_ADDR_1`
+
+Define these arrays listing all the LEDs in your `<keyboard>.c`:
+
+	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+	/* Refer to IS31 manual for these locations
+	 *   driver
+	 *   |  R location
+	 *   |  |       G location
+	 *   |  |       |       B location
+	 *   |  |       |       | */
+	    {0, B_1,    A_1,    C_1},
+	    ....
+	}
+
+Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
+
+From this point forward the configuration is the same for all the drivers. 
 
 	const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
 	/* {row | col << 4}
@@ -80,7 +128,7 @@ All RGB keycodes are currently shared with the RGBLIGHT system:
 These are the effects that are currently available:
 
 	enum rgb_matrix_effects {
-		RGB_MATRIX_SOLID_COLOR = 1,
+	    RGB_MATRIX_SOLID_COLOR = 1,
 	    RGB_MATRIX_ALPHAS_MODS,
 	    RGB_MATRIX_DUAL_BEACON,
 	    RGB_MATRIX_GRADIENT_UP_DOWN,
@@ -93,7 +141,7 @@ These are the effects that are currently available:
 	    RGB_MATRIX_RAINBOW_MOVING_CHEVRON,
 	    RGB_MATRIX_JELLYBEAN_RAINDROPS,
 	#ifdef RGB_MATRIX_KEYPRESSES
-		RGB_MATRIX_SOLID_REACTIVE,
+	    RGB_MATRIX_SOLID_REACTIVE,
 	    RGB_MATRIX_SPLASH,
 	    RGB_MATRIX_MULTISPLASH,
 	    RGB_MATRIX_SOLID_SPLASH,
@@ -107,7 +155,7 @@ These are the effects that are currently available:
 Custom layer effects can be done by defining this in your `<keyboard>.c`:
 
     void rgb_matrix_indicators_kb(void) {
-    	// rgb_matrix_set_color(index, red, green, blue);
+        rgb_matrix_set_color(index, red, green, blue);
     }
 
 A similar function works in the keymap as `rgb_matrix_indicators_user`.

docs/feature_rgblight.md

@@ -1,131 +1,46 @@
 # RGB Lighting
 
-If you've installed addressable RGB lights on your keyboard you can control them with QMK. Currently we support the following addressable LEDs on Atmel AVR processors:
+QMK has the ability to control RGB LEDs attached to your keyboard. This is commonly called *underglow*, due to the LEDs often being mounted on the bottom of the keyboard, producing a nice diffused effect when combined with a translucent case.
 
-* WS2811 and variants (WS2812, WS2812B, WS2812C, etc)
-* SK6812RGBW
+![Planck with RGB Underglow](https://raw.githubusercontent.com/qmk/qmk_firmware/3774a7fcdab5544fc787f4c200be05fcd417e31f/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg)
 
-Some keyboards come with RGB LEDs pre-installed. Others have to have LEDs installed after the fact. See below for information on modifying your keyboard.
+Some keyboards come with RGB LEDs preinstalled. Others must have them installed after the fact. See the [Hardware Modification](#hardware-modification) section for information on adding RGB lighting to your keyboard.
 
-## Selecting Colors
+Currently QMK supports the following addressable LEDs on AVR microcontrollers (however, the white LED in RGBW variants is not supported):
 
-QMK uses Hue, Saturation, and Value to set color rather than using RGB. You can use the color wheel below to see how this works. Changing the Hue will cycle around the circle. Saturation will affect the intensity of the color, which you can see as you move from the inner part to the outer part of the wheel. Value sets the overall brightness.
+ * WS2811, WS2812, WS2812B, WS2812C, etc.
+ * SK6812, SK6812MINI, SK6805
 
-<img src="gitbook/images/color-wheel.svg" alt="HSV Color Wheel" width="250">
+These LEDs are called "addressable" because instead of using a wire per color, each LED contains a small microchip that understands a special protocol sent over a single wire. The chip passes on the remaining data to the next LED, allowing them to be chained together. In this way, you can easily control the color of the individual LEDs.
 
-If you would like to learn more about HSV you can start with the [Wikipedia article](https://en.wikipedia.org/wiki/HSL_and_HSV).
+## Usage
 
-## Configuration
+On keyboards with onboard RGB LEDs, it is usually enabled by default. If it is not working for you, check that your `rules.mk` includes the following:
 
-Before RGB Lighting can be used you have to enable it in `rules.mk`:
-
-    RGBLIGHT_ENABLE = yes
-
-You can configure the behavior of the RGB lighting by defining values inside `config.h`.
-
-### Required Configuration
-
-At minimum you have to define the pin your LED strip is connected to and the number of LEDs connected.
-
-```c
-#define RGB_DI_PIN D7     // The pin the LED strip is connected to
-#define RGBLED_NUM 14     // Number of LEDs in your strip
+```make
+RGBLIGHT_ENABLE = yes
 ```
 
-### Optional Configuration
+At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these.
 
-You can change the behavior of the RGB Lighting by setting these configuration values. Use `#define <Option> <Value>` in a `config.h` at the keyboard, revision, or keymap level.
+|Define      |Description                                  |
+|------------|---------------------------------------------|
+|`RGB_DI_PIN`|The pin connected to the data pin of the LEDs|
+|`RGBLED_NUM`|The number of LEDs connected                 |
 
-| Option | Default Value | Description |
-|--------|---------------|-------------|
-| `RGBLIGHT_HUE_STEP` | 10 | How many hues you want to have available. |
-| `RGBLIGHT_SAT_STEP` | 17 | How many steps of saturation you'd like. |
-| `RGBLIGHT_VAL_STEP` | 17 | The number of levels of brightness you want. |
-| `RGBLIGHT_LIMIT_VAL` | 255 | Limit the val of HSV to limit the maximum brightness simply. |
-| `RGBLIGHT_SLEEP`     |    |  `#define` this will shut off the lights when the host goes to sleep | 
+Then you should be able to use the keycodes below to change the RGB lighting to your liking.
 
+### Color Selection
 
-### Animations
+QMK uses [Hue, Saturation, and Value](https://en.wikipedia.org/wiki/HSL_and_HSV) to select colors rather than RGB. The color wheel below demonstrates how this works.
 
-If you have `#define RGBLIGHT_ANIMATIONS` in your `config.h` you will have a number of animation modes you can cycle through using the `RGB_MOD` key. You can also `#define` other options to tweak certain animations.
+<img src="gitbook/images/color-wheel.svg" alt="HSV Color Wheel" width="250"/>
 
-| Option | Default Value | Description |
-|--------|---------------|-------------|
-| `RGBLIGHT_ANIMATIONS` | | `#define` this to enable animation modes. |
-| `RGBLIGHT_EFFECT_BREATHE_CENTER` | 1.85 | Used to calculate the curve for the breathing animation. Valid values 1.0-2.7. |
-| `RGBLIGHT_EFFECT_BREATHE_MAX` | 255 | The maximum brightness for the breathing mode. Valid values 1-255. |
-| `RGBLIGHT_EFFECT_SNAKE_LENGTH` | 4 | The number of LEDs to light up for the "snake" animation. |
-| `RGBLIGHT_EFFECT_KNIGHT_LENGTH` | 3 | The number of LEDs to light up for the "knight" animation. |
-| `RGBLIGHT_EFFECT_KNIGHT_OFFSET` | 0 | Start the knight animation this many LEDs from the start of the strip. |
-| `RGBLIGHT_EFFECT_KNIGHT_LED_NUM` | RGBLED_NUM | The number of LEDs to have the "knight" animation travel. |
-| `RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL` | 1000 | How long to wait between light changes for the "christmas" animation. Specified in ms. |
-| `RGBLIGHT_EFFECT_CHRISTMAS_STEP` | 2 | How many LED's to group the red/green colors by for the christmas mode. |
+Changing the **Hue** cycles around the circle.  
+Changing the **Saturation** moves between the inner and outer sections of the wheel, affecting the intensity of the color.  
+Changing the **Value** sets the overall brightness.
 
-You can also tweak the behavior of the animations by defining these consts in your `keymap.c`. These mostly affect the speed different modes animate at.
-
-```c
-// How long (in ms) to wait between animation steps for the breathing mode
-const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
-
-// How long (in ms) to wait between animation steps for the rainbow mode
-const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30};
-
-// How long (in ms) to wait between animation steps for the swirl mode
-const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20};
-
-// How long (in ms) to wait between animation steps for the snake mode
-const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
-
-// How long (in ms) to wait between animation steps for the knight modes
-const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
-
-// These control which colors are selected for the gradient mode
-const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
-```
-
-### LED Control
-
-Look in `rgblights.h` for all available functions, but if you want to control all or some LEDs your goto functions are:
-
-```c
-// turn all lights off (stored in EEPROM)
-rgblight_disable();
-// turn lights on, based on their previous state (stored in EEPROM)
-rgblight_enable(); 
-
-// turn all lights off (not stored in EEPROM)
-rgblight_disable_noeeprom();
-// turn lights on, based on their previous state (not stored in EEPROM)
-rgblight_enable_noeeprom();
-
-// where r/g/b is a number from 0..255.  Turns all the LEDs to this color (ignores mode, not stored in EEPROM). 
-rgblight_setrgb(r, g, b); 
-// HSV color control - h is a value from 0..360 and s/v is a value from 0..255 (stored in EEPROM)
-rgblight_sethsv(h, s, v);  
-// HSV color control - h is a value from 0..360 and s/v is a value from 0..255 (not stored in EEPROM)
-rgblight_sethsv_noeeprom(h, s, v);  
-
-// Sets the mode, if rgb animations are enabled (stored in eeprom)
-rgblight_mode(x);
-// Sets the mode, if rgb animations are enabled (not stored in eeprom)
-rgblight_mode_noeeprom(x);
-// MODE 1, solid color
-// MODE 2-5, breathing
-// MODE 6-8, rainbow mood
-// MODE 9-14, rainbow swirl
-// MODE 15-20, snake
-// MODE 21-23, knight
-// MODE 24, xmas
-// MODE 25-34, static rainbow
-
-rgblight_setrgb_at(r,g,b, LED);  // control a single LED.  0 <= LED < RGBLED_NUM
-rgblight_sethsv_at(h,s,v, LED);  // control a single LED.  0 <= LED < RGBLED_NUM
-```
-You can find a list of predefined colors at [`quantum/rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h). Free to add to this list!
-
-## RGB Lighting Keycodes
-
-These control the RGB Lighting functionality.
+## Keycodes
 
 |Key                |Aliases   |Description                                                         |
 |-------------------|----------|--------------------------------------------------------------------|
@@ -146,25 +61,97 @@ These control the RGB Lighting functionality.
 |`RGB_MODE_KNIGHT`  |`RGB_M_K` |"Knight Rider" animation mode                                       |
 |`RGB_MODE_XMAS`    |`RGB_M_X` |Christmas animation mode                                            |
 |`RGB_MODE_GRADIENT`|`RGB_M_G` |Static gradient animation mode                                      |
-|`RGB_MODE_RGBTEST `|`RGB_M_T` |Red,Green,Blue test animation mode                                  |
+|`RGB_MODE_RGBTEST` |`RGB_M_T` |Red, Green, Blue test animation mode                                |
 
-note: for backwards compatibility, `RGB_SMOD` is an alias for `RGB_MOD`.
+?> For backwards compatibility, `RGB_SMOD` is another alias of `RGB_MOD`.
+
+## Configuration
+
+Your RGB lighting can be configured by placing these `#define`s in your `config.h`:
+
+|Define               |Default      |Description                                                                  |
+|---------------------|-------------|-----------------------------------------------------------------------------|
+|`RGBLIGHT_HUE_STEP`  |`10`         |The number of steps to cycle through the hue by                              |
+|`RGBLIGHT_SAT_STEP`  |`17`         |The number of steps to increment the saturation by                           |
+|`RGBLIGHT_VAL_STEP`  |`17`         |The number of steps to increment the brightness by                           |
+|`RGBLIGHT_LIMIT_VAL` |`255`        |The maximum brightness level                                                 |
+|`RGBLIGHT_SLEEP`     |*Not defined*|If defined, the RGB lighting will be switched off when the host goes to sleep|
+
+## Animations
+
+Not only can this lighting be whatever color you want, if `RGBLIGHT_ANIMATIONS` is defined, you also have a number of animation modes at your disposal:
+
+|Mode |Description          |
+|-----|---------------------|
+|1    |Solid color          |
+|2-5  |Solid color breathing|
+|6-8  |Cycling rainbow      |
+|9-14 |Swirling rainbow     |
+|15-20|Snake                |
+|21-23|Knight               |
+|24   |Christmas            |
+|25-34|Static gradient      |
+|35   |RGB Test             |
+|36   |Alternating          |
+
+Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration.
+
+The following options can be used to tweak the various animations:
+
+|Define                              |Default      |Description                                                                          |
+|------------------------------------|-------------|-------------------------------------------------------------------------------------|
+|`RGBLIGHT_ANIMATIONS`               |*Not defined*|If defined, enables additional animation modes                                       |
+|`RGBLIGHT_EFFECT_BREATHE_CENTER`    |`1.85`       |Used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 |
+|`RGBLIGHT_EFFECT_BREATHE_MAX`       |`255`        |The maximum brightness for the breathing mode. Valid values are 1 to 255             |
+|`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
+|`RGBLIGHT_EFFECT_KNIGHT_LENGTH`     |`3`          |The number of LEDs to light up for the "Knight" animation                            |
+|`RGBLIGHT_EFFECT_KNIGHT_OFFSET`     |`0`          |The number of LEDs to start the "Knight" animation from the start of the strip by    |
+|`RGBLIGHT_EFFECT_KNIGHT_LED_NUM`    |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel                             |
+|`RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL`|`1000`       |How long to wait between light changes for the "Christmas" animation, in milliseconds|
+|`RGBLIGHT_EFFECT_CHRISTMAS_STEP`    |`2`          |The number of LEDs to group the red/green colors by for the "Christmas" animation    |
+
+You can also modify the speeds that the different modes animate at:
+
+```c
+// How long (in milliseconds) to wait between animation steps for each of the "Solid color breathing" animations
+const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
+
+// How long (in milliseconds) to wait between animation steps for each of the "Cycling rainbow" animations
+const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30};
+
+// How long (in milliseconds) to wait between animation steps for each of the "Swirling rainbow" animations
+const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20};
+
+// How long (in milliseconds) to wait between animation steps for each of the "Snake" animations
+const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
+
+// How long (in milliseconds) to wait between animation steps for each of the "Knight" animations
+const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
+
+// These control which hues are selected for each of the "Static gradient" modes
+const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
+```
+
+## Functions
+
+If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:
+
+|Function                           |Description                                                                                                                                                            |
+|-----------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`rgblight_enable()`                |Turn LEDs on, based on their previous state                                                                                                                            |
+|`rgblight_enable_noeeprom()`       |Turn LEDs on, based on their previous state (not written to EEPROM)                                                                                                    |
+|`rgblight_disable()`               |Turn LEDs off                                                                                                                                                          |
+|`rgblight_disable_noeeprom()`      |Turn LEDs off (not written to EEPROM)                                                                                                                                  |
+|`rgblight_mode(x)`                 |Set the mode, if RGB animations are enabled                                                                                                                            |
+|`rgblight_mode_noeeprom(x)`        |Set the mode, if RGB animations are enabled (not written to EEPROM)                                                                                                    |
+|`rgblight_setrgb(r, g, b)`         |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                                                    |
+|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)                       |
+|`rgblight_sethsv(h, s, v)`         |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255                                                                   |
+|`rgblight_sethsv_noeeprom(h, s, v)`|Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM)                                           |
+|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
+
+Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list!
 
 ## Hardware Modification
 
-![Planck with RGB Underglow](https://raw.githubusercontent.com/qmk/qmk_firmware/3774a7fcdab5544fc787f4c200be05fcd417e31f/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg)
-
-Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY).
-
-For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring the VCC, GND, and DI, you can enable the underglow in your Makefile.
-
-    RGBLIGHT_ENABLE = yes
-
-In order to use the underglow animation functions, you need to have `#define RGBLIGHT_ANIMATIONS` in your `config.h`.
-
-Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default:
-
-    #define RGB_DI_PIN F4     // The pin your RGB strip is wired to
-    #define RGBLED_NUM 14     // Number of LEDs
-
-You'll need to edit `RGB_DI_PIN` to the pin you have your `DI` on your RGB strip wired to.
+If your keyboard lacks onboard underglow LEDs, you may often be able to solder on an RGB LED strip yourself. You will need to find an unused pin to wire to the data pin of your LED strip. Some keyboards may break out unused pins from the MCU to make soldering easier. The other two pins, VCC and GND, must also be connected to the appropriate power pins.

docs/feature_space_cadet.md

@@ -1,24 +0,0 @@
-## Space Cadet Shift: The Future, Built In
-
-Steve Losh [described](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/) the Space Cadet Shift quite well. Essentially, you hit the left Shift on its own, and you get an opening parenthesis; hit the right Shift on its own, and you get the closing one. When hit with other keys, the Shift key keeps working as it always does. Yes, it's as cool as it sounds.
-
-To use it, use `KC_LSPO` (Left Shift, Parenthesis Open) for your left Shift on your keymap, and `KC_RSPC` (Right Shift, Parenthesis Close) for your right Shift.
-
-It's defaulted to work on US keyboards, but if your layout uses different keys for parenthesis, you can define those in your `config.h` like this:
-
-    #define LSPO_KEY KC_9
-    #define RSPC_KEY KC_0
-
-You can also choose between different rollover behaviors of the shift keys by defining:
-
-    #define DISABLE_SPACE_CADET_ROLLOVER
-
-in your `config.h`. Disabling rollover allows you to use the opposite shift key to cancel the space cadet state in the event of an erroneous press instead of emitting a pair of parentheses when the keys are released.
-
-The only other thing you're going to want to do is create a `Makefile` in your keymap directory and set the following:
-
-```
-COMMAND_ENABLE   = no  # Commands for debug and configuration
-```
-
-This is just to keep the keyboard from going into command mode when you hold both Shift keys at the same time.

docs/feature_space_cadet_shift.md

@@ -0,0 +1,33 @@
+# Space Cadet Shift: The Future, Built In
+
+Steve Losh described the [Space Cadet Shift](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/) quite well. Essentially, when you tap Left Shift on its own, you get an opening parenthesis; tap Right Shift on its own and you get the closing one. When held, the Shift keys function as normal. Yes, it's as cool as it sounds.
+
+## Usage
+
+Replace the Left Shift key in your keymap with `KC_LSPO` (Left Shift, Parenthesis Open), and Right Shift with `KC_RSPC` (Right Shift, Parenthesis Close).
+
+## Keycodes
+
+|Keycode  |Description                           |
+|---------|--------------------------------------|
+|`KC_LSPO`|Left Shift when held, `(` when tapped |
+|`KC_RSPC`|Right Shift when held, `)` when tapped|
+
+## Caveats
+
+Space Cadet's functionality can conflict with the default Command functionality when both Shift keys are held at the same time. Make sure that Command is disabled in your `rules.mk` with:
+
+```make
+COMMAND_ENABLE = no
+```
+
+## Configuration
+
+By default Space Cadet assumes a US ANSI layout, but if your layout uses different keys for parentheses, you can redefine them in your `config.h`.
+You can also disable the rollover, allowing you to use the opposite Shift key to cancel the Space Cadet state in the event of an erroneous press, instead of emitting a pair of parentheses when the keys are released.
+
+|Define                        |Default      |Description                                                 |
+|------------------------------|-------------|------------------------------------------------------------|
+|`LSPO_KEY`                    |`KC_9`       |The keycode to send when Left Shift is tapped               |
+|`RSPC_KEY`                    |`KC_0`       |The keycode to send when Right Shift is tapped              |
+|`DISABLE_SPACE_CADET_ROLLOVER`|*Not defined*|If defined, use the opposite Shift key to cancel Space Cadet|

docs/feature_space_cadet_shift_enter.md

@@ -0,0 +1,31 @@
+# Space Cadet Shift Enter
+
+Based on the [Space Cadet Shift](feature_space_cadet_shift.md) feature. Tap the Shift key on its own, and it behaves like Enter. When held, the Shift functions as normal.
+
+## Usage
+
+Replace any Shift key in your keymap with `KC_SFTENT` (Shift, Enter), and you're done.
+
+## Keycodes
+
+|Keycode    |Description                             |
+|-----------|----------------------------------------|
+|`KC_SFTENT`|Right Shift when held, Enter when tapped|
+
+## Caveats
+
+As with Space Cadet Shift, this feature may conflict with Command, so it should be disabled in your `rules.mk` with:
+
+```make
+COMMAND_ENABLE = no
+```
+
+This feature also uses the same timers as Space Cadet Shift, so using them in tandem may produce strange results.
+
+## Configuration
+
+By default Space Cadet assumes a US ANSI layout, but if you'd like to use a different key for Enter, you can redefine it in your `config.h`:
+
+|Define      |Default |Description                                     |
+|------------|--------|------------------------------------------------|
+|`SFTENT_KEY`|`KC_ENT`|The keycode to send when the Shift key is tapped|

docs/feature_space_shift_cadet.md

@@ -1,26 +0,0 @@
-## Space Cadet Shift Enter: The future, built in
-
-Based on the Space Cadet Shift by Steve Losh [described](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/) 
-Essentially, you hit the Shift on its own, and it acts as the enter key. When hit with other keys, the Shift key keeps working as it always does. Yes, it's as cool as it sounds. This solution works better than using a macro since the timers defined in quantum allow us to tell when another key is pressed, rather than just having a janky timer than results in accidental endlines. 
-
-To use it, use `KC_SFTENT` (Shift, Enter) for any Shift on your keymap.
-
-It's defaulted to work on US keyboards, but if you'd like to use a different key for Enter, you can define those in your `config.h` like this:
-
-    #define SFTENT_KEY KC_ENT
-
-
-The only other thing you're going to want to do is create a `rules.mk` in your keymap directory and set the following:
-
-```
-COMMAND_ENABLE   = no  # Commands for debug and configuration
-```
-
-This is just to keep the keyboard from going into command mode when you hold both Shift keys at the same time.
-
-
-
-
-
-PLEASE NOTE: this feature uses the same timers as the Space Cadet Shift feature, so using them in tandem may produce unwanted results. 
-

docs/feature_swap_hands.md

@@ -22,9 +22,9 @@ Note that the array indices are reversed same as the matrix and the values are o
 |Key        |Description                                                              |
 |-----------|-------------------------------------------------------------------------|
 |`SH_T(key)`|Sends `key` with a tap; momentary swap when held.                        |
-|`SW_ON`    |Turns on swapping and leaves it on.                                      |
-|`SW_OFF`   |Turn off swapping and leaves it off. Good for returning to a known state.|
-|`SW_MON`   |Swaps hands when pressed, returns to normal when released (momentary).   |
-|`SW_MOFF`  |Momentarily turns off swap.                                              |
+|`SH_ON`    |Turns on swapping and leaves it on.                                      |
+|`SH_OFF`   |Turn off swapping and leaves it off. Good for returning to a known state.|
+|`SH_MON`   |Swaps hands when pressed, returns to normal when released (momentary).   |
+|`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |

docs/feature_tap_dance.md

@@ -196,22 +196,20 @@ SRC += your_name.c
 Pretty simple. It is a nice way to keep some rules common on all your keymaps.
 
 
-### In `/qmk_firmware/users/<your_name>/<you_name>.h`
+### In `/qmk_firmware/users/<your_name>/<your_name>.h`
 
 You will need a few things in this file:
 
 ```c
-#ifndef YOUR_NAME
-#define YOUR_NAME
+#pragma once
 
 #include "quantum.h"
 #include "process_keycode/process_tap_dance.h"
 
-
 typedef struct {
   bool is_press_action;
   int state;
-} xtap;
+} tap;
 
 enum {
   SINGLE_TAP = 1,
@@ -225,9 +223,9 @@ enum {
 
 //Tap dance enums
 enum {
-    CTL_X = 0,
-    SOME_OTHER_DANCE
-}
+  X_CTL = 0,
+  SOME_OTHER_DANCE
+};
 
 int cur_dance (qk_tap_dance_state_t *state);
 
@@ -241,7 +239,7 @@ void x_reset (qk_tap_dance_state_t *state, void *user_data);
 And then in your user's `.c` file you implement the functions above:
 
 ```c
-#include "gordon.h"
+#include "<your_name>.h"
 #include "quantum.h"
 #include "action.h"
 #include "process_keycode/process_tap_dance.h"
@@ -335,4 +333,4 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 };
 ```
 
-And then simply use TD(X_CTL) anywhere in your keymap.
+And then simply use `TD(X_CTL)` anywhere in your keymap after including `<your_name>.h`.

docs/feature_userspace.md

@@ -31,6 +31,20 @@ The reason for this, is that `<name>.h` won't be added in time to add settings (
 
 So you should use the `config.h` for QMK settings, and the `<name>.h` file for user or keymap specific settings.
 
+`/users/<name>/rules.mk` will be included in the build _after_ the `rules.mk` from your keymap. This allows you to have features in your userspace `rules.mk` that depend on individual QMK features that may or may not be available on a specific keyboard. For example, if you have RGB control features shared between all your keyboards that support RGB lighting, you can `define RGB_ENABLE` in your keymap `rules.mk` and then check for the variable in your userspace `rules.mk` like this:
+```make
+ifdef RGB_ENABLE
+    # Include my fancy rgb functions source here
+endif
+```
+Because of this, any time you turn on QMK features in your `users/<name>/rules.mk`, you should conditionally enable them only if the flag isn't already defined, like this:
+```make
+ifndef TAP_DANCE_ENABLE
+    TAP_DANCE_ENABLE = yes
+endif
+```
+This will ensure that you can explicitly turn off features for an individual keymap.
+
 ## Readme
 
 Please include authorship (your name, github username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
@@ -122,4 +136,4 @@ By default the userspace used will be the same as the keymap name. In some situa
 
 ```
 USER_NAME := mylayout
-```
+```

docs/features.md

@@ -3,7 +3,7 @@
 QMK has a staggering number of features for building your keyboard. It can take some time to understand all of them and determine which one will achieve your goal.
 
 
-* [Advanced Keycodes](feature_advanced_keycodes.md) - Change layers, type shifted keys, and more. Go beyond typing simple characters.
+* [Advanced Keycodes](feature_advanced_keycodes.md) - Change layers, dual-action keys, and more. Go beyond typing simple characters.
 * [Audio](feature_audio.md) - Connect a speaker to your keyboard for audio feedback, midi support, and music mode.
 * [Auto Shift](feature_auto_shift.md) - Tap for the normal key, hold slightly longer for its shifted state.
 * [Backlight](feature_backlight.md) - LED lighting support for your keyboard.
@@ -19,7 +19,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard.
 * [RGB Light](feature_rgblight.md) - RGB lighting for your keyboard.
 * [RGB Matrix](feature_rgb_matrix.md) - RGB Matrix lights for per key lighting.
-* [Space Cadet](feature_space_cadet.md) - Use your left/right shift keys to type parenthesis and brackets.
+* [Space Cadet](feature_space_cadet_shift.md) - Use your left/right shift keys to type parenthesis and brackets.
 * [Stenography](feature_stenography.md) - Put your keyboard into Plover mode for stenography use.
 * [Swap Hands](feature_swap_hands.md) - Mirror your keyboard for one handed usage.
 * [Tap Dance](feature_tap_dance.md) - Make a single key do as many things as you want.

docs/getting_started_github.md

@@ -19,8 +19,7 @@ And be sure to select "HTTPS", and select the link and copy it:
 From here, enter `git clone ` into the command line, and then paste your link:
 
 ```
-**[terminal]
-**[prompt you@computer]**[path ~]**[delimiter  $ ]**[command git clone https://github.com/whoeveryouare/qmk_firmware.git]
+user@computer:~$ git clone https://github.com/whoeveryouare/qmk_firmware.git
 Cloning into 'qmk_firmware'...
 remote: Counting objects: 46625, done.
 remote: Compressing objects: 100% (2/2), done.
@@ -33,13 +32,12 @@ Checking out files: 100% (2799/2799), done.
 You now have your QMK fork on your local machine, and you can add your keymap, compile it and flash it to your board. Once you're happy with your changes, you can add, commit, and push them to your fork like this:
 
 ```
-**[terminal]
-**[prompt you@computer]**[path ~/qmk_firmware]**[delimiter  $ ]**[command git add .]
-**[prompt you@computer]**[path ~/qmk_firmware]**[delimiter  $ ]**[command git commit -m "adding my keymap"]
+user@computer:~$ git add .
+user@computer:~$ git commit -m "adding my keymap"
 [master cccb1608] adding my keymap
  1 file changed, 1 insertion(+)
  create mode 100644 keyboards/planck/keymaps/mine/keymap.c
-**[prompt you@computer]**[path ~/qmk_firmware]**[delimiter  $ ]**[command git push]
+user@computer:~$ git push
 Counting objects: 1, done.
 Delta compression using up to 4 threads.
 Compressing objects: 100% (1/1), done.

docs/getting_started_make_guide.md

@@ -133,6 +133,10 @@ This consumes about 5390 bytes.
 
 This enables [key lock](feature_key_lock.md). This consumes an additional 260 bytes.
 
+`SPLIT_KEYBOARD`
+
+This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+
 ## Customizing Makefile Options on a Per-Keymap Basis
 
 If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.

docs/hardware_drivers.md

@@ -25,3 +25,11 @@ You can make use of uGFX within QMK to drive character and graphic LCD's, LED ar
 ## WS2812 (AVR Only)
 
 Support for WS2811/WS2812{a,b,c} LED's. For more information see the [RGB Light](feature_rgblight.md) page.
+
+## IS31FL3731
+
+Support for up to 2 drivers. Each driver impliments 2 charlieplex matrices to individually address LEDs using I2C. This allows up to 144 same color LEDs or 32 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.
+
+## IS31FL3733
+
+Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.

docs/isp_flashing_guide.md

@@ -19,58 +19,79 @@ If you're having trouble flashing/erasing your board, and running into cryptic e
     Memory write error, use debug for more info.
     commands.c:360: Error writing memory data. (err -4)
 
-You're likely going to need to ISP flash your board/device to get it working again. Luckily, this process is pretty straight-forward, provided you have any extra programmable keyboard, Arduino, or Teensy 2.0/Teensy 2.0++. There are also dedicated ISP flashers available for this, but most cost >$15, and it's assumed that if you are googling this error, this is the first you've heard about ISP flashing, and don't have one readily available (whereas you might have some other AVR board). __We'll be using a Teensy 2.0 with Windows 10 in this guide__ - if you are comfortable doing this on another system, please consider editing this guide and contributing those instructions!
+You're likely going to need to ISP flash your board/device to get it working again. Luckily, this process is pretty straight-forward, provided you have any extra programmable keyboard, Pro Micro, or Teensy 2.0/Teensy 2.0++. There are also dedicated ISP flashers available for this, but most cost >$15, and it's assumed that if you are googling this error, this is the first you've heard about ISP flashing, and don't have one readily available (whereas you might have some other AVR board). __We'll be using a Teensy 2.0 or Pro Micro with Windows 10 in this guide__ - if you are comfortable doing this on another system, please consider editing this guide and contributing those instructions!   
 
 ## Software Needed
 
-* [The Arduino IDE](https://www.arduino.cc/en/Main/Software)
-* [Teensyduino](https://www.pjrc.com/teensy/td_download.html) (if you're using a Teensy)
-* [WinAVR](http://www.ladyada.net/learn/avr/setup-win.html) (Windows)
+* [Teensy Loader](https://www.pjrc.com/teensy/loader.html) (if using a Teensy)
+* QMK Toolbox (flash as usual - be sure to select the correct MCU) or `avrdude` via [WinAVR](http://www.ladyada.net/learn/avr/setup-win.html) (for Teensy & Pro Micro)
 
 ## Wiring
 
 This is pretty straight-forward - we'll be connecting like-things to like-things in the following manner:
 
-    Flasher B0  <-> Keyboard RESET
-    Flasher B1  <-> Keyboard B1 (SCLK)
-    Flasher B2  <-> Keyboard B2 (MOSI)
-    Flasher B3  <-> Keyboard B3 (MISO)
-    Flasher VCC <-> Keyboard VCC
-    Flasher GND <-> Keyboard GND
+### Teensy 2.0
 
-## The ISP Firmware
+    Teensy B0  <-> Keyboard RESET
+    Teensy B1  <-> Keyboard B1 (SCLK)
+    Teensy B2  <-> Keyboard B2 (MOSI)
+    Teensy B3  <-> Keyboard B3 (MISO)
+    Teensy VCC <-> Keyboard VCC
+    Teensy GND <-> Keyboard GND
+    
+### Pro Micro
+
+    Pro Micro 10 (B6)  <-> Keyboard RESET
+    Pro Micro 15 (B1)  <-> Keyboard B1 (SCLK)
+    Pro Micro 16 (B2)  <-> Keyboard B2 (MOSI)
+    Pro Micro 14 (B3)  <-> Keyboard B3 (MISO)
+    Pro Micro VCC      <-> Keyboard VCC
+    Pro Micro GND      <-> Keyboard GND
+
+## The ISP Firmware (now pre-compiled)
+
+The only difference between the .hex files below is which pin is connected to RESET. You can use them on other boards as well, as long as you're aware of the pins being used. If for some reason neither of these pins are available, [create an issue](https://github.com/qmk/qmk_firmware/issues/new), and we can generate one for you!
+
+* Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`)
+* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_mico_ISP_B6_10.hex) (`B6/10`)
+
+**Flash your Teenys/Pro Micro with one of these and continue - you won't need the file after flashing your ISP device.**
+
+## Just the Bootloader File
+
+If you just want to get things back to normal, you can flash only a bootloader from [`util/` folder](https://github.com/qmk/qmk_firmware/tree/master/util), and use your normal process to flash the firmware afterwards. Be sure to flash the correct bootloader for your chip:
+
+* [`atmega32u4`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) - Most keyboards, Planck Rev 1-5, Preonic Rev 1-2
+* [`at90usb1286`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128x_1_0_1.hex) - Planck Light Rev 1
+
+If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU =` line will have the value you need. It may differ between different versions of the board.
+
+### Advanced/Production Techniques
+
+If you'd like to flash both the bootloader **and** the regular firmware at the same time, you need to combine the files. 
+
+1. Open the original firmware .hex file in a text editor
+2. Remove the last line (which should be `:00000001FF` - this is an EOF message)
+3. Copy the entire bootloader's contents onto a new line (with no empty lines between) and paste it at the end of the original file
+4. Save it as a new file by naming it `<keyboard>_<keymap>_production.hex`
+
+It's possible to use other bootloaders here in the same way, but __you need a bootloader__, otherwise you'll have to use ISP again to write new firmware to your keyboard.
+
+## Flashing Your Bootloader/Production File
 
 Make sure your keyboard is unplugged from any device, and plug in your Teensy.
 
-1. Run Arduino after you have everything installed
-2. Select `Tools > Board * > Teensy 2.0`
-3. Click `File > Examples > 11.ArduinoISP > ArduinoISP`
+### QMK Toolbox
 
-Then scroll down until you see something that looks like this block of code:
+1. `AVRISP device connected` will show up in yellow
+2. Select the correct bootloader/production .hex file with the `Open` dialog (spaces can't be in the path)
+3. Be sure the correct `Microcontroller` option is selected
+4. Hit `Flash`
+5. Wait, as nothing will output for a while, especially with production files
 
-    // Configure which pins to use:
+If the verification and fuse checks are ok, you're done! Your board may restart automatically, otherwise, unplug your Teensy and plug in your keyboard - you can leave your Teensy wired to your keyboard while testing things, but it's recommended that you desolder it/remove the wiring once you're sure everything works.
 
-    // The standard pin configuration.
-    #ifndef ARDUINO_HOODLOADER2
-
-    #define RESET     0  // Use 0 (B0) instead of 10
-    #define LED_HB    11 // Use 11 (LED on the Teensy 2.0)
-    #define LED_ERR   8  // This won't be used unless you have an LED hooked-up to 8 (D3)
-    #define LED_PMODE 7  // This won't be used unless you have an LED hooked-up to 7 (D2)
-
-And make the changes in the last four lines. If you're using something besides the Teensy 2.0, you'll want to choose something else that makes sense for `LED_HB`. We define `RESET` as `0`/`B0` because that's what's close - if you want to use another pin for some reason, [you can use the pinouts to choose something else](https://www.pjrc.com/teensy/pinout.html).
-
-Once you've made your changes, you can click the Upload button (right arrow), which will open up the Teensy flasher app - you'll need to press the reset button on the Teensy the first time, but after that, it's automatic (you shouldn't be flashing this more than once, though). Once flashed, the orange LED on the Teensy will flash on and off, indicating it's ready for some action.
-
-## The `.hex` File
-
-Before flashing your firmware, you're going to need to and do a little preparation. We'll be appending [this bootloader (also a .hex file)](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) to the end of our firmware by opening the original .hex file in a text editor, and removing the last line, which should be `:00000001FF` (this is an EOF message). After that's been removed, copy the entire bootloader's contents and paste it at the end of the original file, and save it.
-
-It's possible to use other bootloaders here in the same way, but __you need a bootloader__, otherwise you'll have to ISP to write new firmware to your keyboard.
-
-## Flashing Your Firmware
-
-Make sure your keyboard is unplugged from any device, and plug in your Teensy.
+### Command Line
 
 Open `cmd` and navigate to your where your modified .hex file is. We'll pretend this file is called `main.hex`, and that your Teensy 2.0 is on the `COM3` port - if you're unsure, you can open your Device Manager, and look for `Ports > USB Serial Device`. Use that COM port here. You can confirm it's the right port with:
 

docs/keycodes.md

@@ -8,40 +8,8 @@ This is a reference only. Each group of keys links to the page documenting their
 
 |Key                    |Aliases             |Description                                    |
 |-----------------------|--------------------|-----------------------------------------------|
-|`KC_1`                 |                    |`1` and `!`                                    |
-|`KC_2`                 |                    |`2` and `@`                                    |
-|`KC_3`                 |                    |`3` and `#`                                    |
-|`KC_4`                 |                    |`4` and `$`                                    |
-|`KC_5`                 |                    |`5` and `%`                                    |
-|`KC_6`                 |                    |`6` and `^`                                    |
-|`KC_7`                 |                    |`7` and `&`                                    |
-|`KC_8`                 |                    |`8` and `*`                                    |
-|`KC_9`                 |                    |`9` and `(`                                    |
-|`KC_0`                 |                    |`0` and `)`                                    |
-|`KC_F1`                |                    |                                               |
-|`KC_F2`                |                    |                                               |
-|`KC_F3`                |                    |                                               |
-|`KC_F4`                |                    |                                               |
-|`KC_F5`                |                    |                                               |
-|`KC_F6`                |                    |                                               |
-|`KC_F7`                |                    |                                               |
-|`KC_F8`                |                    |                                               |
-|`KC_F9`                |                    |                                               |
-|`KC_F10`               |                    |                                               |
-|`KC_F11`               |                    |                                               |
-|`KC_F12`               |                    |                                               |
-|`KC_F13`               |                    |                                               |
-|`KC_F14`               |                    |                                               |
-|`KC_F15`               |                    |                                               |
-|`KC_F16`               |                    |                                               |
-|`KC_F17`               |                    |                                               |
-|`KC_F18`               |                    |                                               |
-|`KC_F19`               |                    |                                               |
-|`KC_F20`               |                    |                                               |
-|`KC_F21`               |                    |                                               |
-|`KC_F22`               |                    |                                               |
-|`KC_F23`               |                    |                                               |
-|`KC_F24`               |                    |                                               |
+|`KC_NO`                |`XXXXXXX`           |Ignore this key (NOOP)                         |
+|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`|Use the next lowest non-transparent key        |
 |`KC_A`                 |                    |`a` and `A`                                    |
 |`KC_B`                 |                    |`b` and `B`                                    |
 |`KC_C`                 |                    |`c` and `C`                                    |
@@ -68,6 +36,16 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_X`                 |                    |`x` and `X`                                    |
 |`KC_Y`                 |                    |`y` and `Y`                                    |
 |`KC_Z`                 |                    |`z` and `Z`                                    |
+|`KC_1`                 |                    |`1` and `!`                                    |
+|`KC_2`                 |                    |`2` and `@`                                    |
+|`KC_3`                 |                    |`3` and `#`                                    |
+|`KC_4`                 |                    |`4` and `$`                                    |
+|`KC_5`                 |                    |`5` and `%`                                    |
+|`KC_6`                 |                    |`6` and `^`                                    |
+|`KC_7`                 |                    |`7` and `&`                                    |
+|`KC_8`                 |                    |`8` and `*`                                    |
+|`KC_9`                 |                    |`9` and `(`                                    |
+|`KC_0`                 |                    |`0` and `)`                                    |
 |`KC_ENTER`             |`KC_ENT`            |Return (Enter)                                 |
 |`KC_ESCAPE`            |`KC_ESC`            |Escape                                         |
 |`KC_BSPACE`            |`KC_BSPC`           |Delete (Backspace)                             |
@@ -79,33 +57,28 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_RBRACKET`          |`KC_RBRC`           |`]` and `}`                                    |
 |`KC_BSLASH`            |`KC_BSLS`           |`\` and <code>&#124;</code>                    |
 |`KC_NONUS_HASH`        |`KC_NUHS`           |Non-US `#` and `~`                             |
-|`KC_NONUS_BSLASH`      |`KC_NUBS`           |Non-US `\` and <code>&#124;</code>             |
-|`KC_INT1`              |`KC_RO`             |JIS `\` and <code>&#124;</code>                |
-|`KC_INT2`              |`KC_KANA`           |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`           |JIS `¥`                                        |
 |`KC_SCOLON`            |`KC_SCLN`           |`;` and `:`                                    |
 |`KC_QUOTE`             |`KC_QUOT`           |`'` and `"`                                    |
-|`KC_GRAVE`             |`KC_GRV`            |<code>&#96;</code> and `~`                     |
+|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK` |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
 |`KC_COMMA`             |`KC_COMM`           |`,` and `<`                                    |
 |`KC_DOT`               |                    |`.` and `>`                                    |
 |`KC_SLASH`             |`KC_SLSH`           |`/` and `?`                                    |
-|`KC_CAPSLOCK`          |`KC_CAPS`           |Caps Lock                                      |
-|`KC_LCTRL`             |`KC_LCTL`           |Left Control                                   |
-|`KC_LSHIFT`            |`KC_LSFT`           |Left Shift                                     |
-|`KC_LALT`              |                    |Left Alt                                       |
-|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key)            |
-|`KC_RCTRL`             |`KC_RCTL`           |Right Control                                  |
-|`KC_RSHIFT`            |`KC_RSFT`           |Right Shift                                    |
-|`KC_RALT`              |                    |Right Alt                                      |
-|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)           |
-|`KC_LOCKING_CAPS`      |`KC_LCAP`           |Locking Caps Lock                              |
-|`KC_LOCKING_NUM`       |`KC_LNUM`           |Locking Num Lock                               |
-|`KC_LOCKING_SCROLL`    |`KC_LSCR`           |Locking Scroll Lock                            |
-|`KC_INT4`              |`KC_HENK`           |JIS Henkan                                     |
-|`KC_INT5`              |`KC_MHEN`           |JIS Muhenkan                                   |
+|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`|Caps Lock                                      |
+|`KC_F1`                |                    |F1                                             |
+|`KC_F2`                |                    |F2                                             |
+|`KC_F3`                |                    |F3                                             |
+|`KC_F4`                |                    |F4                                             |
+|`KC_F5`                |                    |F5                                             |
+|`KC_F6`                |                    |F6                                             |
+|`KC_F7`                |                    |F7                                             |
+|`KC_F8`                |                    |F8                                             |
+|`KC_F9`                |                    |F9                                             |
+|`KC_F10`               |                    |F10                                            |
+|`KC_F11`               |                    |F11                                            |
+|`KC_F12`               |                    |F12                                            |
 |`KC_PSCREEN`           |`KC_PSCR`           |Print Screen                                   |
 |`KC_SCROLLLOCK`        |`KC_SLCK`           |Scroll Lock                                    |
-|`KC_PAUSE`             |`KC_PAUS`           |Pause                                          |
+|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK` |Pause                                          |
 |`KC_INSERT`            |`KC_INS`            |Insert                                         |
 |`KC_HOME`              |                    |Home                                           |
 |`KC_PGUP`              |                    |Page Up                                        |
@@ -116,58 +89,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_LEFT`              |                    |Left Arrow                                     |
 |`KC_DOWN`              |                    |Down Arrow                                     |
 |`KC_UP`                |                    |Up Arrow                                       |
-|`KC_APPLICATION`       |`KC_APP`            |Application (Windows Menu Key)                 |
-|`KC_POWER`             |                    |Deprecated by MS in favor of `KC_SYSTEM_POWER`.|
-|`KC_EXECUTE`           |                    |Execute                                        |
-|`KC_HELP`              |                    |Help                                           |
-|`KC_MENU`              |                    |Menu                                           |
-|`KC_SELECT`            |                    |Select                                         |
-|`KC_AGAIN`             |                    |Again                                          |
-|`KC_UNDO`              |                    |Undo                                           |
-|`KC_CUT`               |                    |Cut                                            |
-|`KC_COPY`              |                    |Copy                                           |
-|`KC_PASTE`             |                    |Paste                                          |
-|`KC_FIND`              |                    |Find                                           |
-|`KC_ALT_ERASE`         |                    |Alternate Erase                                |
-|`KC_SYSREQ`            |                    |SysReq/Attention                               |
-|`KC_CANCEL`            |                    |Cancel                                         |
-|`KC_CLEAR`             |                    |Clear                                          |
-|`KC_PRIOR`             |                    |Prior                                          |
-|`KC_RETURN`            |                    |Return                                         |
-|`KC_SEPARATOR`         |                    |Separator                                      |
-|`KC_OUT`               |                    |Out                                            |
-|`KC_OPER`              |                    |Oper                                           |
-|`KC_CLEAR_AGAIN`       |                    |Clear/Again                                    |
-|`KC_CRSEL`             |                    |CrSel/Props                                    |
-|`KC_EXSEL`             |                    |ExSel                                          |
-|`KC_SYSTEM_POWER`      |`KC_PWR`            |System Power Down. Recommended over `KC_POWER`.|
-|`KC_SYSTEM_SLEEP`      |`KC_SLEP`           |System Sleep                                   |
-|`KC_SYSTEM_WAKE`       |`KC_WAKE`           |System Wake                                    |
-|`KC_MAIL`              |`KC_MAIL`           |                                               |
-|`KC_CALCULATOR`        |`KC_CALC`           |                                               |
-|`KC_MY_COMPUTER`       |`KC_MYCM`           |                                               |
-|`KC_WWW_SEARCH`        |`KC_WSCH`           |                                               |
-|`KC_WWW_HOME`          |`KC_WHOM`           |                                               |
-|`KC_WWW_BACK`          |`KC_WBAK`           |                                               |
-|`KC_WWW_FORWARD`       |`KC_WFWD`           |                                               |
-|`KC_WWW_STOP`          |`KC_WSTP`           |                                               |
-|`KC_WWW_REFRESH`       |`KC_WREF`           |                                               |
-|`KC_WWW_FAVORITES`     |`KC_WFAV`           |                                               |
-|`KC_STOP`              |                    |Stop                                           |
-|`KC__MUTE`             |                    |Mute (macOS)                                   |
-|`KC__VOLUP`            |                    |Volume Up (macOS)                              |
-|`KC__VOLDOWN`          |                    |Volume Down (macOS)                            |
-|`KC_AUDIO_MUTE`        |`KC_MUTE`           |Mute (Windows/macOS/Linux)                     |
-|`KC_AUDIO_VOL_UP`      |`KC_VOLU`           |Volume Up (Windows/macOS/Linux)                |
-|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`           |Volume Down (Windows/macOS/Linux)              |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`           |Next Track (Windows)                           |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`           |Previous Track (Windows)                       |
-|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`           |Next Track (macOS)                             |
-|`KC_MEDIA_REWIND`      |`KC_MRWD`           |Previous Track (macOS)                         |
-|`KC_MEDIA_STOP`        |`KC_MSTP`           |Stop Track                                     |
-|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`           |Play/Pause Track                               |
-|`KC_MEDIA_SELECT`      |`KC_MSEL`           |                                               |
-|`KC_MEDIA_EJECT`       |`KC_EJCT`           |Eject (macOS)                                  |
 |`KC_NUMLOCK`           |`KC_NLCK`           |Keypad Num Lock and Clear                      |
 |`KC_KP_SLASH`          |`KC_PSLS`           |Keypad `/`                                     |
 |`KC_KP_ASTERISK`       |`KC_PAST`           |Keypad `*`                                     |
@@ -185,32 +106,103 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_KP_9`              |`KC_P9`             |Keypad `9` and Page Up                         |
 |`KC_KP_0`              |`KC_P0`             |Keypad `0` and Insert                          |
 |`KC_KP_DOT`            |`KC_PDOT`           |Keypad `.` and Delete                          |
+|`KC_NONUS_BSLASH`      |`KC_NUBS`           |Non-US `\` and <code>&#124;</code>             |
+|`KC_APPLICATION`       |`KC_APP`            |Application (Windows Menu Key)                 |
+|`KC_POWER`             |                    |System Power (macOS)                           |
 |`KC_KP_EQUAL`          |`KC_PEQL`           |Keypad `=`                                     |
+|`KC_F13`               |                    |F13                                            |
+|`KC_F14`               |                    |F14                                            |
+|`KC_F15`               |                    |F15                                            |
+|`KC_F16`               |                    |F16                                            |
+|`KC_F17`               |                    |F17                                            |
+|`KC_F18`               |                    |F18                                            |
+|`KC_F19`               |                    |F19                                            |
+|`KC_F20`               |                    |F20                                            |
+|`KC_F21`               |                    |F21                                            |
+|`KC_F22`               |                    |F22                                            |
+|`KC_F23`               |                    |F23                                            |
+|`KC_F24`               |                    |F24                                            |
+|`KC_EXECUTE`           |`KC_EXEC`           |Execute                                        |
+|`KC_HELP`              |                    |Help                                           |
+|`KC_MENU`              |                    |Menu                                           |
+|`KC_SELECT`            |`KC_SLCT`           |Select                                         |
+|`KC_STOP`              |                    |Stop                                           |
+|`KC_AGAIN`             |`KC_AGIN`           |Again                                          |
+|`KC_UNDO`              |                    |Undo                                           |
+|`KC_CUT`               |                    |Cut                                            |
+|`KC_COPY`              |                    |Copy                                           |
+|`KC_PASTE`             |`KC_PSTE`           |Paste                                          |
+|`KC_FIND`              |                    |Find                                           |
+|`KC__MUTE`             |                    |Mute (macOS)                                   |
+|`KC__VOLUP`            |                    |Volume Up (macOS)                              |
+|`KC__VOLDOWN`          |                    |Volume Down (macOS)                            |
+|`KC_LOCKING_CAPS`      |`KC_LCAP`           |Locking Caps Lock                              |
+|`KC_LOCKING_NUM`       |`KC_LNUM`           |Locking Num Lock                               |
+|`KC_LOCKING_SCROLL`    |`KC_LSCR`           |Locking Scroll Lock                            |
 |`KC_KP_COMMA`          |`KC_PCMM`           |Keypad `,`                                     |
 |`KC_KP_EQUAL_AS400`    |                    |Keypad `=` on AS/400 keyboards                 |
-|`KC_NO`                |                    |Ignore this key (NOOP)                         |
-|`KC_TRANSPARENT`       |`KC_TRNS`           |Use the next lowest non-transparent key        |
-
-## [Mouse Keys](feature_mouse_keys.md)
-
-|Key             |Aliases  |Description                |
-|----------------|---------|---------------------------|
-|`KC_MS_UP`      |`KC_MS_U`|Mouse Cursor Up            |
-|`KC_MS_DOWN`    |`KC_MS_D`|Mouse Cursor Down          |
-|`KC_MS_LEFT`    |`KC_MS_L`|Mouse Cursor Left          |
-|`KC_MS_RIGHT`   |`KC_MS_R`|Mouse Cursor Right         |
-|`KC_MS_BTN1`    |`KC_BTN1`|Mouse Button 1             |
-|`KC_MS_BTN2`    |`KC_BTN2`|Mouse Button 2             |
-|`KC_MS_BTN3`    |`KC_BTN3`|Mouse Button 3             |
-|`KC_MS_BTN4`    |`KC_BTN4`|Mouse Button 4             |
-|`KC_MS_BTN5`    |`KC_BTN5`|Mouse Button 5             |
-|`KC_MS_WH_UP`   |`KC_WH_U`|Mouse Wheel Up             |
-|`KC_MS_WH_DOWN` |`KC_WH_D`|Mouse Wheel Down           |
-|`KC_MS_WH_LEFT` |`KC_WH_L`|Mouse Wheel Left           |
-|`KC_MS_WH_RIGHT`|`KC_WH_R`|Mouse Wheel Right          |
-|`KC_MS_ACCEL0`  |`KC_ACL0`|Set mouse acceleration to 0|
-|`KC_MS_ACCEL1`  |`KC_ACL1`|Set mouse acceleration to 1|
-|`KC_MS_ACCEL2`  |`KC_ACL2`|Set mouse acceleration to 2|
+|`KC_INT1`              |`KC_RO`             |JIS `\` and <code>&#124;</code>                |
+|`KC_INT2`              |`KC_KANA`           |JIS Katakana/Hiragana                          |
+|`KC_INT3`              |`KC_JYEN`           |JIS `¥`                                        |
+|`KC_INT4`              |`KC_HENK`           |JIS Henkan                                     |
+|`KC_INT5`              |`KC_MHEN`           |JIS Muhenkan                                   |
+|`KC_INT6`              |                    |JIS Numpad `,`                                 |
+|`KC_INT7`              |                    |International 7                                |
+|`KC_INT8`              |                    |International 8                                |
+|`KC_INT9`              |                    |International 9                                |
+|`KC_LANG1`             |`KC_HAEN`           |Hangul/English                                 |
+|`KC_LANG2`             |`KC_HANJ`           |Hanja                                          |
+|`KC_LANG3`             |                    |JIS Katakana                                   |
+|`KC_LANG4`             |                    |JIS Hiragana                                   |
+|`KC_LANG5`             |                    |JIS Zenkaku/Hankaku                            |
+|`KC_LANG6`             |                    |Language 6                                     |
+|`KC_LANG7`             |                    |Language 7                                     |
+|`KC_LANG8`             |                    |Language 8                                     |
+|`KC_LANG9`             |                    |Language 9                                     |
+|`KC_ALT_ERASE`         |`KC_ERAS`           |Alternate Erase                                |
+|`KC_SYSREQ`            |                    |SysReq/Attention                               |
+|`KC_CANCEL`            |                    |Cancel                                         |
+|`KC_CLEAR`             |`KC_CLR`            |Clear                                          |
+|`KC_PRIOR`             |                    |Prior                                          |
+|`KC_RETURN`            |                    |Return                                         |
+|`KC_SEPARATOR`         |                    |Separator                                      |
+|`KC_OUT`               |                    |Out                                            |
+|`KC_OPER`              |                    |Oper                                           |
+|`KC_CLEAR_AGAIN`       |                    |Clear/Again                                    |
+|`KC_CRSEL`             |                    |CrSel/Props                                    |
+|`KC_EXSEL`             |                    |ExSel                                          |
+|`KC_LCTRL`             |`KC_LCTL`           |Left Control                                   |
+|`KC_LSHIFT`            |`KC_LSFT`           |Left Shift                                     |
+|`KC_LALT`              |                    |Left Alt                                       |
+|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key)            |
+|`KC_RCTRL`             |`KC_RCTL`           |Right Control                                  |
+|`KC_RSHIFT`            |`KC_RSFT`           |Right Shift                                    |
+|`KC_RALT`              |                    |Right Alt                                      |
+|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)           |
+|`KC_SYSTEM_POWER`      |`KC_PWR`            |System Power Down                              |
+|`KC_SYSTEM_SLEEP`      |`KC_SLEP`           |System Sleep                                   |
+|`KC_SYSTEM_WAKE`       |`KC_WAKE`           |System Wake                                    |
+|`KC_AUDIO_MUTE`        |`KC_MUTE`           |Mute                                           |
+|`KC_AUDIO_VOL_UP`      |`KC_VOLU`           |Volume Up                                      |
+|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`           |Volume Down                                    |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`           |Next Track (Windows)                           |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`           |Previous Track (Windows)                       |
+|`KC_MEDIA_STOP`        |`KC_MSTP`           |Stop Track (Windows)                           |
+|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`           |Play/Pause Track                               |
+|`KC_MEDIA_SELECT`      |`KC_MSEL`           |Launch Media Player (Windows)                  |
+|`KC_MEDIA_EJECT`       |`KC_EJCT`           |Eject (macOS)                                  |
+|`KC_MAIL`              |                    |Launch Mail (Windows)                          |
+|`KC_CALCULATOR`        |`KC_CALC`           |Launch Calculator (Windows)                    |
+|`KC_MY_COMPUTER`       |`KC_MYCM`           |Launch My Computer (Windows)                   |
+|`KC_WWW_SEARCH`        |`KC_WSCH`           |Browser Search (Windows)                       |
+|`KC_WWW_HOME`          |`KC_WHOM`           |Browser Home (Windows)                         |
+|`KC_WWW_BACK`          |`KC_WBAK`           |Browser Back (Windows)                         |
+|`KC_WWW_FORWARD`       |`KC_WFWD`           |Browser Forward (Windows)                      |
+|`KC_WWW_STOP`          |`KC_WSTP`           |Browser Stop (Windows)                         |
+|`KC_WWW_REFRESH`       |`KC_WREF`           |Browser Refresh (Windows)                      |
+|`KC_WWW_FAVORITES`     |`KC_WFAV`           |Browser Favorites (Windows)                    |
+|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`           |Next Track (macOS)                             |
+|`KC_MEDIA_REWIND`      |`KC_MRWD`           |Previous Track (macOS)                         |
 
 ## [Quantum Keycodes](quantum_keycodes.md#qmk-keycodes)
 
@@ -227,6 +219,36 @@ This is a reference only. Each group of keys links to the page documenting their
 |`M(n)`       |           |Call macro `n`                                                       |
 |`MACROTAP(n)`|           |Macro-tap `n` idk FIXME                                              |
 
+## [Audio Keys](feature_audio.md)
+
+|Key             |Aliases  |Description                       |
+|----------------|---------|----------------------------------|
+|`AU_ON`         |         |Audio mode on                     |
+|`AU_OFF`        |         |Audio mode off                    |
+|`AU_TOG`        |         |Toggles Audio mode                |
+|`CLICKY_TOGGLE` |`CK_TOGG`|Toggles Audio clicky mode         |
+|`CLICKY_UP`     |`CK_UP`  |Increases frequency of the clicks |
+|`CLICKY_DOWN`   |`CK_DOWN`|Decreases frequency of the clicks |
+|`CLICKY_RESET`  |`CK_RST` |Resets frequency to default       |
+|`MU_ON`         |         |Turns on Music Mode               |
+|`MU_OFF`        |         |Turns off Music Mode              |
+|`MU_TOG`        |         |Toggles Music Mode                |
+|`MU_MOD`        |         |Cycles through the music modes    |
+
+
+
+## [Backlighting](feature_backlight.md)
+
+|Key      |Description                               |
+|---------|------------------------------------------|
+|`BL_TOGG`|Turn the backlight on or off              |
+|`BL_STEP`|Cycle through backlight levels            |
+|`BL_ON`  |Set the backlight to max brightness       |
+|`BL_OFF` |Turn the backlight off                    |
+|`BL_INC` |Increase the backlight level              |
+|`BL_DEC` |Decrease the backlight level              |
+|`BL_BRTG`|Toggle backlight breathing                |
+
 ## [Bootmagic](feature_bootmagic.md)
 
 |Key                               |Aliases  |Description                         |
@@ -251,17 +273,88 @@ This is a reference only. Each group of keys links to the page documenting their
 |`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI on both sides    |
 |`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                 |
 
-## [Backlighting](feature_backlight.md)
+## [Bluetooth](feature_bluetooth.md)
 
-|Key      |Description                               |
-|---------|------------------------------------------|
-|`BL_TOGG`|Turn the backlight on or off              |
-|`BL_STEP`|Cycle through backlight levels            |
-|`BL_ON`  |Set the backlight to max brightness       |
-|`BL_OFF` |Turn the backlight off                    |
-|`BL_INC` |Increase the backlight level              |
-|`BL_DEC` |Decrease the backlight level              |
-|`BL_BRTG`|Toggle backlight breathing                |
+|Key       |Description                                   |
+|----------|----------------------------------------------|
+|`OUT_AUTO`|Automatically switch between USB and Bluetooth|
+|`OUT_USB` |USB only                                      |
+|`OUT_BT`  |Bluetooth only                                |
+
+
+## [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
+
+|Key         |Description                                                               |
+|-----------------|---------------------------------------------------------------------|
+|`DF(layer)`      |Switches the default layer                                           |
+|`MO(layer)`      |Momentarily activates layer, switches off when you let go            |
+|`LM(layer, mod)` |As `MO(layer)` but with `mod` active                                 |
+|`LT(layer, kc)`  |Momentarily activates layer if held, sends kc if tapped              |
+|`TG(layer)`      |Toggles the layer (enables it if no active, and vise versa)          |
+|`TO(layer)`      |Activates layer and deactivates all other layers                     |
+|`TT(layer)`      |Momentarily activates layer if held, toggles it if tapped repeatedly |
+
+## [Mouse Keys](feature_mouse_keys.md)
+
+|Key             |Aliases  |Description                |
+|----------------|---------|---------------------------|
+|`KC_MS_UP`      |`KC_MS_U`|Mouse Cursor Up            |
+|`KC_MS_DOWN`    |`KC_MS_D`|Mouse Cursor Down          |
+|`KC_MS_LEFT`    |`KC_MS_L`|Mouse Cursor Left          |
+|`KC_MS_RIGHT`   |`KC_MS_R`|Mouse Cursor Right         |
+|`KC_MS_BTN1`    |`KC_BTN1`|Mouse Button 1             |
+|`KC_MS_BTN2`    |`KC_BTN2`|Mouse Button 2             |
+|`KC_MS_BTN3`    |`KC_BTN3`|Mouse Button 3             |
+|`KC_MS_BTN4`    |`KC_BTN4`|Mouse Button 4             |
+|`KC_MS_BTN5`    |`KC_BTN5`|Mouse Button 5             |
+|`KC_MS_WH_UP`   |`KC_WH_U`|Mouse Wheel Up             |
+|`KC_MS_WH_DOWN` |`KC_WH_D`|Mouse Wheel Down           |
+|`KC_MS_WH_LEFT` |`KC_WH_L`|Mouse Wheel Left           |
+|`KC_MS_WH_RIGHT`|`KC_WH_R`|Mouse Wheel Right          |
+|`KC_MS_ACCEL0`  |`KC_ACL0`|Set mouse acceleration to 0|
+|`KC_MS_ACCEL1`  |`KC_ACL1`|Set mouse acceleration to 1|
+|`KC_MS_ACCEL2`  |`KC_ACL2`|Set mouse acceleration to 2|
+
+## [Modifiers](feature_advanced_keycodes.md#modifier-keys)
+
+|Key       |Aliases               |Description                                         |
+|----------|----------------------|----------------------------------------------------|
+|`KC_HYPR` |                      |Hold Left Control, Shift, Alt and GUI               |
+|`KC_MEH`  |                      |Hold Left Control, Shift and Alt                    |
+|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|                      |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
+|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
+|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
+|`ALTG(kc)`|                      |Hold Right Control and Alt and press `kc`           |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+
+## [Mod-Tap Keys](feature_advanced_keycodes.md#mod-tap)
+
+|Key         |Aliases                                |Description                                            |
+|------------|---------------------------------------|-------------------------------------------------------|
+|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
+|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
+|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
+|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
+|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
+|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
+|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
+|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
+|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
+|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
 
 ## [RGB Lighting](feature_rgblight.md)
 
@@ -309,80 +402,31 @@ This is a reference only. Each group of keys links to the page documenting their
 |`PRINT_ON` |Start printing everything the user types|
 |`PRINT_OFF`|Stop printing everything the user types |
 
-## [Bluetooth](feature_bluetooth.md)
+## [US ANSI Shifted Symbols](keycodes_us_ansi_shifted.md)
 
-|Key       |Description                                   |
-|----------|----------------------------------------------|
-|`OUT_AUTO`|Automatically switch between USB and Bluetooth|
-|`OUT_USB` |USB only                                      |
-|`OUT_BT`  |Bluetooth only                                |
-
-## [Modifiers](quantum_keycodes.md#modifiers)
-
-|Key       |Aliases               |Description                                         |
-|----------|----------            |----------------------------------------------------|
-|`KC_HYPR` |                      |Hold Left Control, Shift, Alt and GUI               |
-|`KC_MEH`  |                      |Hold Left Control, Shift and Alt                    |
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|                      |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`ALTG(kc)`|                      |Hold Right Control and Alt and press `kc`           |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
-
-## [Mod-Tap Keys](quantum_keycodes.md#mod-tap-keys)
-
-|Key         |Aliases                                |Description                                            |
-|------------|---------------------------------------|-------------------------------------------------------|
-|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
-|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
-|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
-|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
-|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
-|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
-|`SCMD_T(kc)`|`SWIN_T(kc)`                           |Left Shift and GUI when held, `kc` when tapped         |
-|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
-
-## [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
-
-|Key                     |Aliases           |Description        |
-|------------------------|------------------|-------------------|
-|`KC_TILDE`              |`KC_TILD`         |`~`                |
-|`KC_EXCLAIM`            |`KC_EXLM`         |`!`                |
-|`KC_AT`                 |                  |`@`                |
-|`KC_HASH`               |                  |`#`                |
-|`KC_DOLLAR`             |`KC_DLR`          |`$`                |
-|`KC_PERCENT`            |`KC_PERC`         |`%`                |
-|`KC_CIRCUMFLEX`         |`KC_CIRC`         |`^`                |
-|`KC_AMPERSAND`          |`KC_AMPR`         |`&`                |
-|`KC_ASTERISK`           |`KC_ASTR`         |`*`                |
-|`KC_LEFT_PAREN`         |`KC_LPRN`         |`(`                |
-|`KC_RIGHT_PAREN`        |`KC_RPRN`         |`)`                |
-|`KC_UNDERSCORE`         |`KC_UNDS`         |`_`                |
-|`KC_PLUS`               |                  |`+`                |
-|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`         |`{`                |
-|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`         |`}`                |
-|`KC_PIPE`               |                  |<code>&#124;</code>|
-|`KC_COLON`              |`KC_COLN`         |`:`                |
-|`KC_DOUBLE_QUOTE`       |`KC_DQT`/`KC_DQUO`|`"`                |
-|`KC_LEFT_ANGLE_BRACKET` |`KC_LT`/`KC_LABK` |`<`                |
-|`KC_RIGHT_ANGLE_BRACKET`|`KC_GT`/`KC_RABK` |`>`                |
-|`KC_QUESTION`           |`KC_QUES`         |`?`                |
+|Key                     |Aliases            |Description        |
+|------------------------|-------------------|-------------------|
+|`KC_TILDE`              |`KC_TILD`          |`~`                |
+|`KC_EXCLAIM`            |`KC_EXLM`          |`!`                |
+|`KC_AT`                 |                   |`@`                |
+|`KC_HASH`               |                   |`#`                |
+|`KC_DOLLAR`             |`KC_DLR`           |`$`                |
+|`KC_PERCENT`            |`KC_PERC`          |`%`                |
+|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`                |
+|`KC_AMPERSAND`          |`KC_AMPR`          |`&`                |
+|`KC_ASTERISK`           |`KC_ASTR`          |`*`                |
+|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`                |
+|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`                |
+|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`                |
+|`KC_PLUS`               |                   |`+`                |
+|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`                |
+|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`                |
+|`KC_PIPE`               |                   |<code>&#124;</code>|
+|`KC_COLON`              |`KC_COLN`          |`:`                |
+|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`                |
+|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`                |
+|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`                |
+|`KC_QUESTION`           |`KC_QUES`          |`?`                |
 
 ## [Switching and Toggling Layers](feature_advanced_keycodes.md#switching-and-toggling-layers)
 
@@ -396,19 +440,13 @@ This is a reference only. Each group of keys links to the page documenting their
 |`TT(layer)`     |Normally acts like MO unless it's tapped multiple times, which toggles `layer` on |
 |`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well.                  |
 
-## [One Shot Keys](quantum_keycodes.md#one-shot-keys)
+## [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
 
 |Key         |Description                       |
 |------------|----------------------------------|
 |`OSM(mod)`  |Hold `mod` for one keypress       |
 |`OSL(layer)`|Switch to `layer` for one keypress|
 
-## [Unicode Support](feature_unicode.md)
-
-|Key         |Aliases|                                                 |
-|------------|-------|-------------------------------------------------|
-|`UNICODE(n)`|`UC(n)`|Send Unicode character `n`                       |
-|`X(n)`      |       |Send Unicode character `n` via a different method|
 
 ## [Swap Hands](feature_swap_hands.md)
 
@@ -421,3 +459,9 @@ This is a reference only. Each group of keys links to the page documenting their
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+## [Unicode Support](feature_unicode.md)
+
+|Key         |Aliases|                                                 |
+|------------|-------|-------------------------------------------------|
+|`UNICODE(n)`|`UC(n)`|Send Unicode character `n`                       |
+|`X(n)`      |       |Send Unicode character `n` via a different method|

docs/keycodes_basic.md

@@ -47,117 +47,145 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 |Key     |Description|
 |--------|-----------|
-|`KC_F1` |           |
-|`KC_F2` |           |
-|`KC_F3` |           |
-|`KC_F4` |           |
-|`KC_F5` |           |
-|`KC_F6` |           |
-|`KC_F7` |           |
-|`KC_F8` |           |
-|`KC_F9` |           |
-|`KC_F10`|           |
-|`KC_F11`|           |
-|`KC_F12`|           |
-|`KC_F13`|           |
-|`KC_F14`|           |
-|`KC_F15`|           |
-|`KC_F16`|           |
-|`KC_F17`|           |
-|`KC_F18`|           |
-|`KC_F19`|           |
-|`KC_F20`|           |
-|`KC_F21`|           |
-|`KC_F22`|           |
-|`KC_F23`|           |
-|`KC_F24`|           |
+|`KC_F1` |F1         |
+|`KC_F2` |F2         |
+|`KC_F3` |F3         |
+|`KC_F4` |F4         |
+|`KC_F5` |F5         |
+|`KC_F6` |F6         |
+|`KC_F7` |F7         |
+|`KC_F8` |F8         |
+|`KC_F9` |F9         |
+|`KC_F10`|F10        |
+|`KC_F11`|F11        |
+|`KC_F12`|F12        |
+|`KC_F13`|F13        |
+|`KC_F14`|F14        |
+|`KC_F15`|F15        |
+|`KC_F16`|F16        |
+|`KC_F17`|F17        |
+|`KC_F18`|F18        |
+|`KC_F19`|F19        |
+|`KC_F20`|F20        |
+|`KC_F21`|F21        |
+|`KC_F22`|F22        |
+|`KC_F23`|F23        |
+|`KC_F24`|F24        |
 
 ## Punctuation
 
-|Key              |Aliases  |Description                       |
-|-----------------|---------|----------------------------------|
-|`KC_ENTER`       |`KC_ENT` |Return (Enter)                    |
-|`KC_ESCAPE`      |`KC_ESC` |Escape                            |
-|`KC_BSPACE`      |`KC_BSPC`|Delete (Backspace)                |
-|`KC_TAB`         |         |Tab                               |
-|`KC_SPACE`       |`KC_SPC` |Spacebar                          |
-|`KC_MINUS`       |`KC_MINS`|`-` and `_`                       |
-|`KC_EQUAL`       |`KC_EQL` |`=` and `+`                       |
-|`KC_LBRACKET`    |`KC_LBRC`|`[` and `{`                       |
-|`KC_RBRACKET`    |`KC_RBRC`|`]` and `}`                       |
-|`KC_BSLASH`      |`KC_BSLS`|`\` and <code>&#124;</code>       |
-|`KC_NONUS_HASH`  |`KC_NUHS`|Non-US `#` and `~`                |
-|`KC_NONUS_BSLASH`|`KC_NUBS`|Non-US `\` and <code>&#124;</code>|
-|`KC_INT1`        |`KC_RO`  |JIS `\` and <code>&#124;</code>   |
-|`KC_INT2`        |`KC_KANA`|JIS Katakana/Hiragana             |
-|`KC_INT3`        |`KC_JYEN`|JIS `¥`                           |
-|`KC_SCOLON`      |`KC_SCLN`|`;` and `:`                       |
-|`KC_QUOTE`       |`KC_QUOT`|`'` and `"`                       |
-|`KC_GRAVE`       |`KC_GRV` |<code>&#96;</code> and `~`        |
-|`KC_COMMA`       |`KC_COMM`|`,` and `<`                       |
-|`KC_DOT`         |         |`.` and `>`                       |
-|`KC_SLASH`       |`KC_SLSH`|`/` and `?`                       |
-|`KC_CAPSLOCK`    |`KC_CAPS`|Caps Lock                         |
+|Key              |Aliases            |Description                                    |
+|-----------------|-------------------|-----------------------------------------------|
+|`KC_ENTER`       |`KC_ENT`           |Return (Enter)                                 |
+|`KC_ESCAPE`      |`KC_ESC`           |Escape                                         |
+|`KC_BSPACE`      |`KC_BSPC`          |Delete (Backspace)                             |
+|`KC_TAB`         |                   |Tab                                            |
+|`KC_SPACE`       |`KC_SPC`           |Spacebar                                       |
+|`KC_MINUS`       |`KC_MINS`          |`-` and `_`                                    |
+|`KC_EQUAL`       |`KC_EQL`           |`=` and `+`                                    |
+|`KC_LBRACKET`    |`KC_LBRC`          |`[` and `{`                                    |
+|`KC_RBRACKET`    |`KC_RBRC`          |`]` and `}`                                    |
+|`KC_BSLASH`      |`KC_BSLS`          |`\` and <code>&#124;</code>                    |
+|`KC_NONUS_HASH`  |`KC_NUHS`          |Non-US `#` and `~`                             |
+|`KC_SCOLON`      |`KC_SCLN`          |`;` and `:`                                    |
+|`KC_QUOTE`       |`KC_QUOT`          |`'` and `"`                                    |
+|`KC_GRAVE`       |`KC_GRV`, `KC_ZKHK`|<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
+|`KC_COMMA`       |`KC_COMM`          |`,` and `<`                                    |
+|`KC_DOT`         |                   |`.` and `>`                                    |
+|`KC_SLASH`       |`KC_SLSH`          |`/` and `?`                                    |
+|`KC_NONUS_BSLASH`|`KC_NUBS`          |Non-US `\` and <code>&#124;</code>             |
+
+## Lock Keys
+
+|Key                |Aliases             |Description              |
+|-------------------|--------------------|-------------------------|
+|`KC_CAPSLOCK`      |`KC_CLCK`, `KC_CAPS`|Caps Lock                |
+|`KC_SCROLLLOCK`    |`KC_SLCK`           |Scroll Lock              |
+|`KC_NUMLOCK`       |`KC_NLCK`           |Keypad Num Lock and Clear|
+|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock        |
+|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock         |
+|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock      |
 
 ## Modifiers
 
-|Key                |Aliases             |Description                         |
-|-------------------|--------------------|------------------------------------|
-|`KC_LCTRL`         |`KC_LCTL`           |Left Control                        |
-|`KC_LSHIFT`        |`KC_LSFT`           |Left Shift                          |
-|`KC_LALT`          |                    |Left Alt                            |
-|`KC_LGUI`          |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key) |
-|`KC_RCTRL`         |`KC_RCTL`           |Right Control                       |
-|`KC_RSHIFT`        |`KC_RSFT`           |Right Shift                         |
-|`KC_RALT`          |                    |Right Alt                           |
-|`KC_RGUI`          |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)|
-|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock                   |
-|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock                    |
-|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock                 |
-|`KC_INT4`          |`KC_HENK`           |JIS Henkan                          |
-|`KC_INT5`          |`KC_MHEN`           |JIS Muhenkan                        |
+|Key        |Aliases             |Description                         |
+|-----------|--------------------|------------------------------------|
+|`KC_LCTRL` |`KC_LCTL`           |Left Control                        |
+|`KC_LSHIFT`|`KC_LSFT`           |Left Shift                          |
+|`KC_LALT`  |                    |Left Alt                            |
+|`KC_LGUI`  |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key) |
+|`KC_RCTRL` |`KC_RCTL`           |Right Control                       |
+|`KC_RSHIFT`|`KC_RSFT`           |Right Shift                         |
+|`KC_RALT`  |                    |Right Alt                           |
+|`KC_RGUI`  |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)|
+
+## International
+
+|Key       |Aliases  |Description                    |
+|----------|---------|-------------------------------|
+|`KC_INT1` |`KC_RO`  |JIS `\` and <code>&#124;</code>|
+|`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana          |
+|`KC_INT3` |`KC_JYEN`|JIS `¥`                        |
+|`KC_INT4` |`KC_HENK`|JIS Henkan                     |
+|`KC_INT5` |`KC_MHEN`|JIS Muhenkan                   |
+|`KC_INT6` |         |JIS Numpad `,`                 |
+|`KC_INT7` |         |International 7                |
+|`KC_INT8` |         |International 8                |
+|`KC_INT9` |         |International 9                |
+|`KC_LANG1`|`KC_HAEN`|Hangul/English                 |
+|`KC_LANG2`|`KC_HANJ`|Hanja                          |
+|`KC_LANG3`|         |JIS Katakana                   |
+|`KC_LANG4`|         |JIS Hiragana                   |
+|`KC_LANG5`|         |JIS Zenkaku/Hankaku            |
+|`KC_LANG6`|         |Language 6                     |
+|`KC_LANG7`|         |Language 7                     |
+|`KC_LANG8`|         |Language 8                     |
+|`KC_LANG9`|         |Language 9                     |
 
 ## Commands
 
-|Key               |Aliases  |Description                   |
-|------------------|---------|------------------------------|
-|`KC_PSCREEN`      |`KC_PSCR`|Print Screen                  |
-|`KC_SCROLLLOCK`   |`KC_SLCK`|Scroll Lock                   |
-|`KC_PAUSE`        |`KC_PAUS`|Pause                         |
-|`KC_INSERT`       |`KC_INS` |Insert                        |
-|`KC_HOME`         |         |Home                          |
-|`KC_PGUP`         |         |Page Up                       |
-|`KC_DELETE`       |`KC_DEL` |Forward Delete                |
-|`KC_END`          |         |End                           |
-|`KC_PGDOWN`       |`KC_PGDN`|Page Down                     |
-|`KC_RIGHT`        |`KC_RGHT`|Right Arrow                   |
-|`KC_LEFT`         |         |Left Arrow                    |
-|`KC_DOWN`         |         |Down Arrow                    |
-|`KC_UP`           |         |Up Arrow                      |
-|`KC_APPLICATION`  |`KC_APP` |Application (Windows Menu Key)|
-|`KC_POWER`        |         |Power                         |
-|`KC_EXECUTE`      |         |Execute                       |
-|`KC_HELP`         |         |Help                          |
-|`KC_MENU`         |         |Menu                          |
-|`KC_SELECT`       |         |Select                        |
-|`KC_AGAIN`        |         |Again                         |
-|`KC_UNDO`         |         |Undo                          |
-|`KC_CUT`          |         |Cut                           |
-|`KC_COPY`         |         |Copy                          |
-|`KC_PASTE`        |         |Paste                         |
-|`KC_FIND`         |         |Find                          |
-|`KC_ALT_ERASE`    |         |Alternate Erase               |
-|`KC_SYSREQ`       |         |SysReq/Attention              |
-|`KC_CANCEL`       |         |Cancel                        |
-|`KC_CLEAR`        |         |Clear                         |
-|`KC_PRIOR`        |         |Prior                         |
-|`KC_RETURN`       |         |Return                        |
-|`KC_SEPARATOR`    |         |Separator                     |
-|`KC_OUT`          |         |Out                           |
-|`KC_OPER`         |         |Oper                          |
-|`KC_CLEAR_AGAIN`  |         |Clear/Again                   |
-|`KC_CRSEL`        |         |CrSel/Props                   |
-|`KC_EXSEL`        |         |ExSel                         |
+|Key               |Aliases            |Description                   |
+|------------------|-------------------|------------------------------|
+|`KC_PSCREEN`      |`KC_PSCR`          |Print Screen                  |
+|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`|Pause                         |
+|`KC_INSERT`       |`KC_INS`           |Insert                        |
+|`KC_HOME`         |                   |Home                          |
+|`KC_PGUP`         |                   |Page Up                       |
+|`KC_DELETE`       |`KC_DEL`           |Forward Delete                |
+|`KC_END`          |                   |End                           |
+|`KC_PGDOWN`       |`KC_PGDN`          |Page Down                     |
+|`KC_RIGHT`        |`KC_RGHT`          |Right Arrow                   |
+|`KC_LEFT`         |                   |Left Arrow                    |
+|`KC_DOWN`         |                   |Down Arrow                    |
+|`KC_UP`           |                   |Up Arrow                      |
+|`KC_APPLICATION`  |`KC_APP`           |Application (Windows Menu Key)|
+|`KC_POWER`        |                   |System Power (macOS/Linux)    |
+|`KC_EXECUTE`      |`KC_EXEC`          |Execute                       |
+|`KC_HELP`         |                   |Help                          |
+|`KC_MENU`         |                   |Menu                          |
+|`KC_SELECT`       |`KC_SLCT`          |Select                        |
+|`KC_STOP`         |                   |Stop                          |
+|`KC_AGAIN`        |`KC_AGIN`          |Again                         |
+|`KC_UNDO`         |                   |Undo                          |
+|`KC_CUT`          |                   |Cut                           |
+|`KC_COPY`         |                   |Copy                          |
+|`KC_PASTE`        |`KC_PSTE`          |Paste                         |
+|`KC_FIND`         |                   |Find                          |
+|`KC__MUTE`        |                   |Mute (macOS)                  |
+|`KC__VOLUP`       |                   |Volume Up (macOS)             |
+|`KC__VOLDOWN`     |                   |Volume Down (macOS)           |
+|`KC_ALT_ERASE`    |`KC_ERAS`          |Alternate Erase               |
+|`KC_SYSREQ`       |                   |SysReq/Attention              |
+|`KC_CANCEL`       |                   |Cancel                        |
+|`KC_CLEAR`        |`KC_CLR`           |Clear                         |
+|`KC_PRIOR`        |                   |Prior                         |
+|`KC_RETURN`       |                   |Return                        |
+|`KC_SEPARATOR`    |                   |Separator                     |
+|`KC_OUT`          |                   |Out                           |
+|`KC_OPER`         |                   |Oper                          |
+|`KC_CLEAR_AGAIN`  |                   |Clear/Again                   |
+|`KC_CRSEL`        |                   |CrSel/Props                   |
+|`KC_EXSEL`        |                   |ExSel                         |
 
 ## Media Keys
 
@@ -165,42 +193,37 @@ These keycodes are not part of the Keyboard/Keypad usage page. The `SYSTEM_` key
 
 Windows and macOS use different keycodes for "next track" and "previous track". Make sure you choose the keycode that corresponds to your OS.
 
-|Key                    |Aliases  |Description                      |
-|-----------------------|---------|---------------------------------|
-|`KC_SYSTEM_POWER`      |`KC_PWR` |System Power Down                |
-|`KC_SYSTEM_SLEEP`      |`KC_SLEP`|System Sleep                     |
-|`KC_SYSTEM_WAKE`       |`KC_WAKE`|System Wake                      |
-|`KC_MAIL`              |`KC_MAIL`|                                 |
-|`KC_CALCULATOR`        |`KC_CALC`|                                 |
-|`KC_MY_COMPUTER`       |`KC_MYCM`|                                 |
-|`KC_WWW_SEARCH`        |`KC_WSCH`|                                 |
-|`KC_WWW_HOME`          |`KC_WHOM`|                                 |
-|`KC_WWW_BACK`          |`KC_WBAK`|                                 |
-|`KC_WWW_FORWARD`       |`KC_WFWD`|                                 |
-|`KC_WWW_STOP`          |`KC_WSTP`|                                 |
-|`KC_WWW_REFRESH`       |`KC_WREF`|                                 |
-|`KC_STOP`              |         |Stop                             |
-|`KC_WWW_FAVORITES`     |`KC_WFAV`|                                 |
-|`KC__MUTE`             |         |Mute (macOS)                     |
-|`KC__VOLUP`            |         |Volume Up (macOS)                |
-|`KC__VOLDOWN`          |         |Volume Down (macOS)              |
-|`KC_AUDIO_MUTE`        |`KC_MUTE`|Mute (Windows/macOS/Linux)       |
-|`KC_AUDIO_VOL_UP`      |`KC_VOLU`|Volume Up (Windows/macOS/Linux)  |
-|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`|Volume Down (Windows/macOS/Linux)|
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track (Windows)             |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track (Windows)         |
-|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`|Next Track (macOS)               |
-|`KC_MEDIA_REWIND`      |`KC_MRWD`|Previous Track (macOS)           |
-|`KC_MEDIA_STOP`        |`KC_MSTP`|Stop Track                       |
-|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`|Play/Pause Track                 |
-|`KC_MEDIA_SELECT`      |`KC_MSEL`|                                 |
-|`KC_MEDIA_EJECT`       |`KC_EJCT`|Eject (macOS)                    |
+|Key                    |Aliases  |Description                  |
+|-----------------------|---------|-----------------------------|
+|`KC_SYSTEM_POWER`      |`KC_PWR` |System Power Down            |
+|`KC_SYSTEM_SLEEP`      |`KC_SLEP`|System Sleep                 |
+|`KC_SYSTEM_WAKE`       |`KC_WAKE`|System Wake                  |
+|`KC_AUDIO_MUTE`        |`KC_MUTE`|Mute                         |
+|`KC_AUDIO_VOL_UP`      |`KC_VOLU`|Volume Up                    |
+|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`|Volume Down                  |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track (Windows)         |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track (Windows)     |
+|`KC_MEDIA_STOP`        |`KC_MSTP`|Stop Track (Windows)         |
+|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`|Play/Pause Track             |
+|`KC_MEDIA_SELECT`      |`KC_MSEL`|Launch Media Player (Windows)|
+|`KC_MEDIA_EJECT`       |`KC_EJCT`|Eject (macOS)                |
+|`KC_MAIL`              |         |Launch Mail (Windows)        |
+|`KC_CALCULATOR`        |`KC_CALC`|Launch Calculator (Windows)  |
+|`KC_MY_COMPUTER`       |`KC_MYCM`|Launch My Computer (Windows) |
+|`KC_WWW_SEARCH`        |`KC_WSCH`|Browser Search (Windows)     |
+|`KC_WWW_HOME`          |`KC_WHOM`|Browser Home (Windows)       |
+|`KC_WWW_BACK`          |`KC_WBAK`|Browser Back (Windows)       |
+|`KC_WWW_FORWARD`       |`KC_WFWD`|Browser Forward (Windows)    |
+|`KC_WWW_STOP`          |`KC_WSTP`|Browser Stop (Windows)       |
+|`KC_WWW_REFRESH`       |`KC_WREF`|Browser Refresh (Windows)    |
+|`KC_WWW_FAVORITES`     |`KC_WFAV`|Browser Favorites (Windows)  |
+|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`|Next Track (macOS)           |
+|`KC_MEDIA_REWIND`      |`KC_MRWD`|Previous Track (macOS)       |
 
 ## Number Pad
 
 |Key                |Aliases  |Description                   |
 |-------------------|---------|------------------------------|
-|`KC_NUMLOCK`       |`KC_NLCK`|Keypad Num Lock and Clear     |
 |`KC_KP_SLASH`      |`KC_PSLS`|Keypad `/`                    |
 |`KC_KP_ASTERISK`   |`KC_PAST`|Keypad `*`                    |
 |`KC_KP_MINUS`      |`KC_PMNS`|Keypad `-`                    |
@@ -225,7 +248,7 @@ Windows and macOS use different keycodes for "next track" and "previous track".
 
 In addition to these, keycodes in the range of `0xA5-DF` are reserved for internal use by TMK.
 
-|Key             |Aliases  |Description                            |
-|----------------|---------|---------------------------------------|
-|`KC_NO`         |         |Ignore this key (NOOP)                 |
-|`KC_TRANSPARENT`|`KC_TRNS`|Use the next lowest non-transparent key|
+|Key             |Aliases             |Description                            |
+|----------------|--------------------|---------------------------------------|
+|`KC_NO`         |`XXXXXXX`           |Ignore this key (NOOP)                 |
+|`KC_TRANSPARENT`|`KC_TRNS`, `_______`|Use the next lowest non-transparent key|

docs/keycodes_us_ansi_shifted.md

@@ -1,31 +1,33 @@
 # US ANSI Shifted Symbols
 
-These keycodes correspond to characters that are "shifted" on a standard US ANSI keyboards. They do not have dedicated keycodes but are instead typed by holding down shift and then sending a keycode.
+These keycodes correspond to characters that are "shifted" on a standard US ANSI keyboard. They do not have keycodes of their own but are simply shortcuts for `LSFT(kc)`, and as such send a Left Shift with the unshifted keycode, not the symbol itself.
 
-It's important to remember that all of these keycodes send a left shift - this may cause unintended actions if unaccounted for. The short code is preferred in most situations.
+## Caveats
 
-## US ANSI Shifted Keycodes
+Unfortunately, these keycodes cannot be used in Mod-Taps or Layer-Taps, since any modifiers specified in the keycode are ignored.
 
-|Key                     |Aliases           |Description        |
-|------------------------|------------------|-------------------|
-|`KC_TILDE`              |`KC_TILD`         |`~`                |
-|`KC_EXCLAIM`            |`KC_EXLM`         |`!`                |
-|`KC_AT`                 |                  |`@`                |
-|`KC_HASH`               |                  |`#`                |
-|`KC_DOLLAR`             |`KC_DLR`          |`$`                |
-|`KC_PERCENT`            |`KC_PERC`         |`%`                |
-|`KC_CIRCUMFLEX`         |`KC_CIRC`         |`^`                |
-|`KC_AMPERSAND`          |`KC_AMPR`         |`&`                |
-|`KC_ASTERISK`           |`KC_ASTR`         |`*`                |
-|`KC_LEFT_PAREN`         |`KC_LPRN`         |`(`                |
-|`KC_RIGHT_PAREN`        |`KC_RPRN`         |`)`                |
-|`KC_UNDERSCORE`         |`KC_UNDS`         |`_`                |
-|`KC_PLUS`               |                  |`+`                |
-|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`         |`{`                |
-|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`         |`}`                |
-|`KC_PIPE`               |                  |<code>&#124;</code>|
-|`KC_COLON`              |`KC_COLN`         |`:`                |
-|`KC_DOUBLE_QUOTE`       |`KC_DQT`/`KC_DQUO`|`"`                |
-|`KC_LEFT_ANGLE_BRACKET` |`KC_LT`/`KC_LABK` |`<`                |
-|`KC_RIGHT_ANGLE_BRACKET`|`KC_GT`/`KC_RABK` |`>`                |
-|`KC_QUESTION`           |`KC_QUES`         |`?`                |
+## Keycodes
+
+|Key                     |Aliases            |Description        |
+|------------------------|-------------------|-------------------|
+|`KC_TILDE`              |`KC_TILD`          |`~`                |
+|`KC_EXCLAIM`            |`KC_EXLM`          |`!`                |
+|`KC_AT`                 |                   |`@`                |
+|`KC_HASH`               |                   |`#`                |
+|`KC_DOLLAR`             |`KC_DLR`           |`$`                |
+|`KC_PERCENT`            |`KC_PERC`          |`%`                |
+|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`                |
+|`KC_AMPERSAND`          |`KC_AMPR`          |`&`                |
+|`KC_ASTERISK`           |`KC_ASTR`          |`*`                |
+|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`                |
+|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`                |
+|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`                |
+|`KC_PLUS`               |                   |`+`                |
+|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`                |
+|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`                |
+|`KC_PIPE`               |                   |<code>&#124;</code>|
+|`KC_COLON`              |`KC_COLN`          |`:`                |
+|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`                |
+|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`                |
+|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`                |
+|`KC_QUESTION`           |`KC_QUES`          |`?`                |

docs/redirects.json

@@ -34,7 +34,7 @@
             },
             {
                 "from": "space_cadet_shift.html",
-                "to": "feature_space_cadet.html"
+                "to": "feature_space_cadet_shift.html"
             },
             {
                 "from": "tap_dance.html",

docs/ref_functions.md

@@ -0,0 +1,48 @@
+# List of Useful Core Functions To Make Your Keyboard Better
+
+There are a lot of hidden functions in QMK that are incredible useful, or may add a bit of functionality that you've been wanting.  Functions that are specific to certain features are not included here, as those will be on their respective feature page. 
+
+## (OLKB) Tri Layers
+
+There are actually separate functions that you can use there, depending on what you're after. 
+
+The first is the `update_tri_layer(x, y, z)` function.   This function check to see if layers `x` and `y` are both on. If they are both on, then it runs on layer `z`.  Otherwise, if both `x` and `y` are not both on (either only one is, or neither is), then it runs off layer `z`. 
+
+This function is useful if you want to create specific keys that have this functionality, but other layer keycodes won't do this. 
+
+The other function is `update_tri_layer_state(state, x, y, z)`.  This function is meant to be called from they [`layer_state_set_*` functions](custom_quantum_functions.md#layer-change-code).  This means that any time that you use a keycode to change the layer, this will be checked.  So you could use `LT(layer, kc)` to change the layer and it will trigger the same layer check. 
+
+The caveat to this method is that you cannot access the `z` layer without having `x` and `y` layers on, since if you try to activate just layer `z`, it will run this code and turn off layer `z` before you could use it. 
+
+## Setting the Persistent Default Layer
+
+Do you want to set the default layer, so that it's retained even after you unplug the board?  If so, this is the function for you. 
+
+To use this, you would use `set_single_persistent_default_layer(layer)`.  If you have a name defined for your layer, you can use that instead (such as _QWERTY, _DVORAK or _COLEMAK). 
+
+This will set the default layer, update the persistent settings, and play a tune if you have [Audio](feature_audio.md) enabled on your board, and the default layer sounds set. 
+
+To configure the default layer sounds, you would want to define this in your `config.h` file, like this: 
+
+```c
+#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                              SONG(COLEMAK_SOUND), \
+                              SONG(DVORAK_SOUND) \
+                            }
+```
+
+
+?> There are a large number of predefined songs in [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h) that you can use.
+
+## Reseting the keyboard
+
+There is the `RESET` quantum keycode that you can use. But if you want to reset the board as part of a macro, rather than hitting a key separately, you can do that. 
+
+And to do so, add `reset_keyboard()` to your function or macro, and this will reset to bootloader.
+
+## Wiping the EEPROM (Persistent Storage)
+
+If you're having issues with Audio, RGB Underglow, backlighting or keys acting weird, then you can reset the EEPROM (persistent setting storage).  Bootmagic is one way to do this, but if that isn't enabled, then you can use a custom macro to do so. 
+
+To wipe the EEPROM, run `eeconfig_init()` from your function or macro to reset most of the settings to default. 
+

docs/reference_glossary.md

@@ -133,7 +133,7 @@ A 1 byte number that is sent as part of a HID report over USB that represents a
 ## Space Cadet Shift
 A special set of shift keys which allow you to type various types of braces by tapping the left or right shift one or more times.
 
-* [Space Cadet Shift Documentation](feature_space_cadet.md)
+* [Space Cadet Shift Documentation](feature_space_cadet_shift.md)
 
 ## Tap
 Pressing and releasing a key. In some situations you will need to distinguish between a key down and a key up event, and Tap always refers to both at once.

docs/understanding_qmk.md

@@ -12,7 +12,7 @@ You can think of QMK as no different from any other computer program. It is star
 
 The reason for this is the different platforms that QMK supports. The most common platform is `lufa`, which runs on AVR processors such at the atmega32u4. We also support `chibios` and `vusb`.
 
-We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/protocol/lufa/lufa.c#L1129). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/protocol/lufa/lufa.c#L1182). This is [The Main Loop](#the_main_loop).
+We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1019). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1060). This is [The Main Loop](#the-main-loop).
 
 ## The Main Loop
 
@@ -22,7 +22,7 @@ This section of code is called "The Main Loop" because it's responsible for loop
     keyboard_task();
 ```
 
-This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keyboard.c#L154), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
+This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/common/keyboard.c#L206), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
 
 Within `keyboard_task()` you'll find code to handle:
 
@@ -77,7 +77,7 @@ At the keyboard level we define a C macro (typically named `KEYMAP()`) which map
 
 Notice how the second block of our `KEYMAP()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
 
-You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
+You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
 
 ##### Keycode Assignment
 
@@ -129,27 +129,32 @@ Comparing against our keymap we can see that the pressed key is KC_NLCK. From he
 <!-- FIXME: Magic happens between here and process_record -->
 
 ##### Process Record
+The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions.  Depending on options set in rule.mk or elsewhere, only a subset of the functions below will be included in final firmware.
 
-The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is described below, using cluecard whenever we need to look at the keyboard/keymap level functions.
-
-* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action.c#L128)
-  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L140)
-    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L143)
-    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/card/card.c#L20)
-      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
-    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_midi.c#L102)
-    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_audio.c#L10)
-    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_music.c#L69)
-    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_tap_dance.c#L75)
-    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_leader.c#L32)
-    * [`bool process_chording(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_chording.c#L41)
-    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_combo.c#L115)
-    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_unicode.c#L22)
-    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_ucis.c#L91)
-    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_printer.c#L77)
-    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_auto_shift.c#L47)
-    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_unicodemap.c#L47)
-    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L211)
+* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/tmk_core/common/action.c#L172)
+  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L193)
+    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L213)
+    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_tap_dance.c#L115)
+    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_key_lock.c#L62)
+    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_clicky.c#L44)
+    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/card.c#L20)
+      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
+    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/fdd0f915271f79b104aa5d216566bcc3fd134e85/quantum/rgb_matrix.c#L139)
+    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_midi.c#L81)
+    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_audio.c#L19)
+    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_steno.c#L160)
+    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_music.c#L114)
+    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_tap_dance.c#L136)
+    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_leader.c#L38)
+    * [`bool process_chording(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_chording.c#L41)
+    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_combo.c#L115)
+    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicode.c#L22)
+    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_ucis.c#L91)
+    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_printer.c#L77)
+    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_auto_shift.c#L94)
+    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicodemap.c#L47)
+    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_terminal.c#L264)
+    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/quantum.c#L287)
 
 At any step during this chain of events a function (such as `process_record_kb()`) can `return false` to halt all further processing.
 

drivers/arm/i2c_master.c

@@ -0,0 +1,104 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library is only valid for STM32 processors.
+ * This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
+ * but using any other I2C pins should be trivial.
+ */
+
+#include "i2c_master.h"
+#include <string.h>
+#include <hal.h>
+
+static uint8_t i2c_address;
+
+// This configures the I2C clock to 400Mhz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+static const I2CConfig i2cconfig = {
+  STM32_TIMINGR_PRESC(15U) |
+  STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) |
+  STM32_TIMINGR_SCLH(15U)  | STM32_TIMINGR_SCLL(21U),
+  0,
+  0
+};
+
+void i2c_init(void)
+{
+  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
+  chThdSleepMilliseconds(10);
+
+  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+
+  //i2cInit(); //This is invoked by halInit() so no need to redo it.
+}
+
+// This is usually not needed
+uint8_t i2c_start(uint8_t address)
+{
+  i2c_address = address;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+  return 0;
+}
+
+uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+{
+  i2c_address = address;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
+}
+
+uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+{
+  i2c_address = address;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+  return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
+}
+
+uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+{
+  i2c_address = devaddr;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+
+  uint8_t complete_packet[length + 1];
+  for(uint8_t i = 0; i < length; i++)
+  {
+    complete_packet[i+1] = data[i];
+  }
+  complete_packet[0] = regaddr;
+
+  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
+}
+
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+{
+  i2c_address = devaddr;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
+}
+
+// This is usually not needed. It releases the driver to allow pins to become GPIO again.
+uint8_t i2c_stop(uint16_t timeout)
+{
+  i2cStop(&I2C_DRIVER);
+  return 0;
+}

drivers/arm/i2c_master.h

@@ -0,0 +1,39 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free sofare: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Sofare Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ */
+
+#include "ch.h"
+#include <hal.h>
+
+#ifndef I2C_DRIVER
+  #define I2C_DRIVER I2CD1
+#endif
+
+void i2c_init(void);
+uint8_t i2c_start(uint8_t address);
+uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_stop(uint16_t timeout);

drivers/avr/i2c_master.c

@@ -15,15 +15,15 @@
 void i2c_init(void)
 {
   TWSR = 0;     /* no prescaler */
-	TWBR = (uint8_t)TWBR_val;
+  TWBR = (uint8_t)TWBR_val;
 }
 
 i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
 {
-	// reset TWI control register
-	TWCR = 0;
-	// transmit START condition
-	TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+  // reset TWI control register
+  TWCR = 0;
+  // transmit START condition
+  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -32,13 +32,13 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
     }
   }
 
-	// check if the start condition was successfully transmitted
-	if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return I2C_STATUS_ERROR; }
+  // check if the start condition was successfully transmitted
+  if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return I2C_STATUS_ERROR; }
 
-	// load slave address into data register
-	TWDR = address;
-	// start transmission of address
-	TWCR = (1<<TWINT) | (1<<TWEN);
+  // load slave address into data register
+  TWDR = address;
+  // start transmission of address
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -47,19 +47,19 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
     }
   }
 
-	// check if the device has acknowledged the READ / WRITE mode
-	uint8_t twst = TW_STATUS & 0xF8;
-	if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return I2C_STATUS_ERROR;
+  // check if the device has acknowledged the READ / WRITE mode
+  uint8_t twst = TW_STATUS & 0xF8;
+  if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return I2C_STATUS_ERROR;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_write(uint8_t data, uint16_t timeout)
 {
-	// load data into data register
-	TWDR = data;
-	// start transmission of data
-	TWCR = (1<<TWINT) | (1<<TWEN);
+  // load data into data register
+  TWDR = data;
+  // start transmission of data
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -68,16 +68,16 @@ i2c_status_t i2c_write(uint8_t data, uint16_t timeout)
     }
   }
 
-	if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return I2C_STATUS_ERROR; }
+  if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return I2C_STATUS_ERROR; }
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 int16_t i2c_read_ack(uint16_t timeout)
 {
 
-	// start TWI module and acknowledge data after reception
-	TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
+  // start TWI module and acknowledge data after reception
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -86,15 +86,15 @@ int16_t i2c_read_ack(uint16_t timeout)
     }
   }
 
-	// return received data from TWDR
-	return TWDR;
+  // return received data from TWDR
+  return TWDR;
 }
 
 int16_t i2c_read_nack(uint16_t timeout)
 {
 
-	// start receiving without acknowledging reception
-	TWCR = (1<<TWINT) | (1<<TWEN);
+  // start receiving without acknowledging reception
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -103,39 +103,39 @@ int16_t i2c_read_nack(uint16_t timeout)
     }
   }
 
-	// return received data from TWDR
-	return TWDR;
+  // return received data from TWDR
+  return TWDR;
 }
 
 i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
-	if (status) return status;
-
-	for (uint16_t i = 0; i < length; i++) {
-		status = i2c_write(data[i], timeout);
-    if (status) return status;
-	}
-
-	status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  for (uint16_t i = 0; i < length; i++) {
+    status = i2c_write(data[i], timeout);
+    if (status) return status;
+  }
+
+  status = i2c_stop(timeout);
+  if (status) return status;
+
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(address | I2C_READ, timeout);
-	if (status) return status;
+  if (status) return status;
 
-	for (uint16_t i = 0; i < (length-1); i++) {
+  for (uint16_t i = 0; i < (length-1); i++) {
     status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
     } else {
       return status;
     }
-	}
+  }
 
   status = i2c_read_nack(timeout);
   if (status >= 0 ) {
@@ -147,47 +147,47 @@ i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16
   status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
-	if (status) return status;
-
-	status = i2c_write(regaddr, timeout);
   if (status) return status;
 
-	for (uint16_t i = 0; i < length; i++) {
+  status = i2c_write(regaddr, timeout);
+  if (status) return status;
+
+  for (uint16_t i = 0; i < length; i++) {
     status = i2c_write(data[i], timeout);
-		if (status) return status;
-	}
+    if (status) return status;
+  }
 
-	status = i2c_stop(timeout);
+  status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(devaddr, timeout);
-	if (status) return status;
+  if (status) return status;
 
   status = i2c_write(regaddr, timeout);
   if (status) return status;
 
   status = i2c_start(devaddr | 0x01, timeout);
-	if (status) return status;
+  if (status) return status;
 
-	for (uint16_t i = 0; i < (length-1); i++) {
-		status = i2c_read_ack(timeout);
+  for (uint16_t i = 0; i < (length-1); i++) {
+    status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
     } else {
       return status;
     }
-	}
+  }
 
   status = i2c_read_nack(timeout);
   if (status >= 0 ) {
@@ -199,13 +199,13 @@ i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16
   status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_stop(uint16_t timeout)
 {
-	// transmit STOP condition
-	TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+  // transmit STOP condition
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
 
   uint16_t timeout_timer = timer_read();
   while(TWCR & (1<<TWSTO)) {
@@ -215,4 +215,4 @@ i2c_status_t i2c_stop(uint16_t timeout)
   }
 
   return I2C_STATUS_SUCCESS;
-}
+}

drivers/avr/i2c_master.h

@@ -28,4 +28,4 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint1
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_stop(uint16_t timeout);
 
-#endif // I2C_MASTER_H
+#endif // I2C_MASTER_H

drivers/avr/i2c_slave.c

@@ -5,96 +5,64 @@
 #include <avr/io.h>
 #include <util/twi.h>
 #include <avr/interrupt.h>
+#include <stdbool.h>
 
 #include "i2c_slave.h"
 
 void i2c_init(uint8_t address){
-	// load address into TWI address register
-	TWAR = (address << 1);
-	// set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
-	TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+    // load address into TWI address register
+    TWAR = (address << 1);
+    // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
+    TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }
 
 void i2c_stop(void){
-	// clear acknowledge and enable bits
-	TWCR &= ~( (1<<TWEA) | (1<<TWEN) );
+    // clear acknowledge and enable bits
+    TWCR &= ~((1 << TWEA) | (1 << TWEN));
 }
 
 ISR(TWI_vect){
-	
-	// temporary stores the received data
-	uint8_t data;
-	
-	// own address has been acknowledged
-	if( (TWSR & 0xF8) == TW_SR_SLA_ACK ){  
-		buffer_address = 0xFF;
-		// clear TWI interrupt flag, prepare to receive next byte and acknowledge
-		TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
-	}
-	else if( (TWSR & 0xF8) == TW_SR_DATA_ACK ){ // data has been received in slave receiver mode
-		
-		// save the received byte inside data 
-		data = TWDR;
-		
-		// check wether an address has already been transmitted or not
-		if(buffer_address == 0xFF){
-			
-			buffer_address = data; 
-			
-			// clear TWI interrupt flag, prepare to receive next byte and acknowledge
-			TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
-		}
-		else{ // if a databyte has already been received
-			
-			// store the data at the current address
-			rxbuffer[buffer_address] = data;
-			
-			// increment the buffer address
-			buffer_address++;
-			
-			// if there is still enough space inside the buffer
-			if(buffer_address < 0xFF){
-				// clear TWI interrupt flag, prepare to receive next byte and acknowledge
-				TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
-			}
-			else{
-				// Don't acknowledge
-				TWCR &= ~(1<<TWEA); 
-				// clear TWI interrupt flag, prepare to receive last byte.
-				TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEN); 
-			}
-		}
-	}
-	else if( (TWSR & 0xF8) == TW_ST_DATA_ACK ){ // device has been addressed to be a transmitter
-		
-		// copy data from TWDR to the temporary memory
-		data = TWDR;
-		
-		// if no buffer read address has been sent yet
-		if( buffer_address == 0xFF ){
-			buffer_address = data;
-		}
-		
-		// copy the specified buffer address into the TWDR register for transmission
-		TWDR = txbuffer[buffer_address];
-		// increment buffer read address
-		buffer_address++;
-		
-		// if there is another buffer address that can be sent
-		if(buffer_address < 0xFF){
-			// clear TWI interrupt flag, prepare to send next byte and receive acknowledge
-			TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
-		}
-		else{
-			// Don't acknowledge
-			TWCR &= ~(1<<TWEA); 
-			// clear TWI interrupt flag, prepare to receive last byte.
-			TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEN); 
-		}
-		
-	}
-	else{
-		// if none of the above apply prepare TWI to be addressed again
-		TWCR |= (1<<TWIE) | (1<<TWEA) | (1<<TWEN);
-	} 
-}
+    uint8_t ack = 1;
+    // temporary stores the received data
+    //uint8_t data;
+    
+    switch(TW_STATUS){
+        case TW_SR_SLA_ACK:
+            // The device is now a slave receiver
+            slave_has_register_set = false;
+            break;
+
+        case TW_SR_DATA_ACK:
+            // This device is a slave receiver and has received data
+            // First byte is the location then the bytes will be writen in buffer with auto-incriment
+            if(!slave_has_register_set){
+                buffer_address = TWDR;
+
+                if (buffer_address >= RX_BUFFER_SIZE){ // address out of bounds dont ack
+                    ack = 0;
+                    buffer_address = 0;
+                }
+                slave_has_register_set = true; // address has been receaved now fill in buffer
+            } else {
+                rxbuffer[buffer_address] = TWDR;
+                buffer_address++;
+            }
+            break;
+
+        case TW_ST_SLA_ACK:
+        case TW_ST_DATA_ACK:
+            // This device is a slave transmitter and master has requested data
+            TWDR = txbuffer[buffer_address];
+            buffer_address++;
+            break;
+
+        case TW_BUS_ERROR:
+            // We got an error, reset i2c
+            TWCR = 0;
+        default:
+            break;
+    }
+
+    // Reset i2c state mahcine to be ready for next interrupt
+    TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN);
+}

drivers/avr/i2c_slave.h

@@ -8,12 +8,16 @@
 #ifndef I2C_SLAVE_H
 #define I2C_SLAVE_H
 
+#define TX_BUFFER_SIZE 30
+#define RX_BUFFER_SIZE 30
+
 volatile uint8_t buffer_address;
-volatile uint8_t txbuffer[0xFF];
-volatile uint8_t rxbuffer[0xFF];
+static volatile bool slave_has_register_set = false;
+volatile uint8_t txbuffer[TX_BUFFER_SIZE];
+volatile uint8_t rxbuffer[RX_BUFFER_SIZE];
 
 void i2c_init(uint8_t address);
 void i2c_stop(void);
 ISR(TWI_vect);
 
-#endif // I2C_SLAVE_H
+#endif // I2C_SLAVE_H

drivers/avr/is31fl3731.c

@@ -1,262 +0,0 @@
-/* Copyright 2017 Jason Williams
- * Copyright 2018 Jack Humbert
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "is31fl3731.h"
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include <string.h>
-#include "i2c_master.h"
-#include "progmem.h"
-
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define ISSI_ADDR_DEFAULT 0x74
-
-#define ISSI_REG_CONFIG  0x00
-#define ISSI_REG_CONFIG_PICTUREMODE 0x00
-#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
-#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
-
-#define ISSI_CONF_PICTUREMODE 0x00
-#define ISSI_CONF_AUTOFRAMEMODE 0x04
-#define ISSI_CONF_AUDIOMODE 0x08
-
-#define ISSI_REG_PICTUREFRAME  0x01
-
-#define ISSI_REG_SHUTDOWN 0x0A
-#define ISSI_REG_AUDIOSYNC 0x06
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-
-#ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
-#endif
-
-#ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
-#endif
-
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
-
-// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
-// Storing them like this is optimal for I2C transfers to the registers.
-// We could optimize this and take out the unused registers from these
-// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
-// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required = false;
-
-uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
-
-// This is the bit pattern in the LED control registers
-// (for matrix A, add one to register for matrix B)
-//
-//  reg -  b7  b6  b5  b4  b3  b2  b1  b0
-// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
-// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
-// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
-// 0x06 -  - , - , - , - , - ,B02,B01,B00
-// 0x08 -  - , - , - , - , - , - , - , -
-// 0x0A - B17,B16,B15, - , - , - , - , -
-// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
-// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
-// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
-
-
-void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
-	g_twi_transfer_buffer[0] = reg;
-	g_twi_transfer_buffer[1] = data;
-
-  #if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
-    }
-  #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
-}
-
-void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
-	// assumes bank is already selected
-
-	// transmit PWM registers in 9 transfers of 16 bytes
-	// g_twi_transfer_buffer[] is 20 bytes
-
-	// iterate over the pwm_buffer contents at 16 byte intervals
-	for ( int i = 0; i < 144; i += 16 ) {
-		// set the first register, e.g. 0x24, 0x34, 0x44, etc.
-		g_twi_transfer_buffer[0] = 0x24 + i;
-		// copy the data from i to i+15
-		// device will auto-increment register for data after the first byte
-		// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
-		for ( int j = 0; j < 16; j++ ) {
-			g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
-		}
-
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
-	}
-}
-
-void IS31FL3731_init( uint8_t addr )
-{
-	// In order to avoid the LEDs being driven with garbage data
-	// in the LED driver's PWM registers, first enable software shutdown,
-	// then set up the mode and other settings, clear the PWM registers,
-	// then disable software shutdown.
-
-	// select "function register" bank
-	IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
-
-	// enable software shutdown
-	IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
-	// this delay was copied from other drivers, might not be needed
-	_delay_ms( 10 );
-
-	// picture mode
-	IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
-	// display frame 0
-	IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
-	// audio sync off
-	IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
-
-	// select bank 0
-	IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
-
-	// turn off all LEDs in the LED control register
-	for ( int i = 0x00; i <= 0x11; i++ )
-	{
-		IS31FL3731_write_register( addr, i, 0x00 );
-	}
-
-	// turn off all LEDs in the blink control register (not really needed)
-	for ( int i = 0x12; i <= 0x23; i++ )
-	{
-		IS31FL3731_write_register( addr, i, 0x00 );
-	}
-
-	// set PWM on all LEDs to 0
-	for ( int i = 0x24; i <= 0xB3; i++ )
-	{
-		IS31FL3731_write_register( addr, i, 0x00 );
-	}
-
-	// select "function register" bank
-	IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
-
-	// disable software shutdown
-	IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
-
-	// select bank 0 and leave it selected.
-	// most usage after initialization is just writing PWM buffers in bank 0
-	// as there's not much point in double-buffering
-	IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
-
-}
-
-void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-	if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
-		is31_led led = g_is31_leds[index];
-
-		// Subtract 0x24 to get the second index of g_pwm_buffer
-		g_pwm_buffer[led.driver][led.r - 0x24] = red;
-		g_pwm_buffer[led.driver][led.g - 0x24] = green;
-		g_pwm_buffer[led.driver][led.b - 0x24] = blue;
-		g_pwm_buffer_update_required = true;
-	}
-}
-
-void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-	for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-	{
-		IS31FL3731_set_color( i, red, green, blue );
-	}
-}
-
-void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
-	is31_led led = g_is31_leds[index];
-
-  uint8_t control_register_r = (led.r - 0x24) / 8;
-  uint8_t control_register_g = (led.g - 0x24) / 8;
-  uint8_t control_register_b = (led.b - 0x24) / 8;
-  uint8_t bit_r = (led.r - 0x24) % 8;
-  uint8_t bit_g = (led.g - 0x24) % 8;
-  uint8_t bit_b = (led.b - 0x24) % 8;
-
-	if ( red ) {
-		g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
-	} else {
-		g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
-	}
-	if ( green ) {
-		g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
-	} else {
-		g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
-	}
-	if ( blue ) {
-		g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
-	} else {
-		g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
-	}
-
-	g_led_control_registers_update_required = true;
-
-}
-
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
-{
-	if ( g_pwm_buffer_update_required )
-	{
-		IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-		IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
-	}
-	g_pwm_buffer_update_required = false;
-}
-
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
-{
-	if ( g_led_control_registers_update_required )
-	{
-		for ( int i=0; i<18; i++ )
-		{
-			IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
-			IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
-		}
-	}
-}
-

drivers/issi/is31fl3731.c

@@ -0,0 +1,271 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include "is31fl3731.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define ISSI_ADDR_DEFAULT 0x74
+
+#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00
+#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
+#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+
+#define ISSI_CONF_PICTUREMODE 0x00
+#define ISSI_CONF_AUTOFRAMEMODE 0x04
+#define ISSI_CONF_AUDIOMODE 0x08
+
+#define ISSI_REG_PICTUREFRAME  0x01
+
+#define ISSI_REG_SHUTDOWN 0x0A
+#define ISSI_REG_AUDIOSYNC 0x06
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][144];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
+bool g_led_control_registers_update_required = false;
+
+// This is the bit pattern in the LED control registers
+// (for matrix A, add one to register for matrix B)
+//
+//  reg -  b7  b6  b5  b4  b3  b2  b1  b0
+// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
+// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
+// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
+// 0x06 -  - , - , - , - , - ,B02,B01,B00
+// 0x08 -  - , - , - , - , - , - , - , -
+// 0x0A - B17,B16,B15, - , - , - , - , -
+// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
+// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
+// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
+
+
+void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes bank is already selected
+
+    // transmit PWM registers in 9 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 144; i += 16 ) {
+        // set the first register, e.g. 0x24, 0x34, 0x44, etc.
+        g_twi_transfer_buffer[0] = 0x24 + i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3731_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, first enable software shutdown,
+    // then set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // select "function register" bank
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+
+    // enable software shutdown
+    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
+    // this delay was copied from other drivers, might not be needed
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+
+    // picture mode
+    IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
+    // display frame 0
+    IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
+    // audio sync off
+    IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
+
+    // select bank 0
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+
+    // turn off all LEDs in the LED control register
+    for ( int i = 0x00; i <= 0x11; i++ )
+    {
+        IS31FL3731_write_register( addr, i, 0x00 );
+    }
+
+    // turn off all LEDs in the blink control register (not really needed)
+    for ( int i = 0x12; i <= 0x23; i++ )
+    {
+        IS31FL3731_write_register( addr, i, 0x00 );
+    }
+
+    // set PWM on all LEDs to 0
+    for ( int i = 0x24; i <= 0xB3; i++ )
+    {
+        IS31FL3731_write_register( addr, i, 0x00 );
+    }
+
+    // select "function register" bank
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+
+    // disable software shutdown
+    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
+
+    // select bank 0 and leave it selected.
+    // most usage after initialization is just writing PWM buffers in bank 0
+    // as there's not much point in double-buffering
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+
+}
+
+void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        // Subtract 0x24 to get the second index of g_pwm_buffer
+        g_pwm_buffer[led.driver][led.r - 0x24] = red;
+        g_pwm_buffer[led.driver][led.g - 0x24] = green;
+        g_pwm_buffer[led.driver][led.b - 0x24] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31FL3731_set_color( i, red, green, blue );
+    }
+}
+
+void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+  uint8_t control_register_r = (led.r - 0x24) / 8;
+  uint8_t control_register_g = (led.g - 0x24) / 8;
+  uint8_t control_register_b = (led.b - 0x24) / 8;
+  uint8_t bit_r = (led.r - 0x24) % 8;
+  uint8_t bit_g = (led.g - 0x24) % 8;
+  uint8_t bit_b = (led.b - 0x24) % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        for ( int i=0; i<18; i++ )
+        {
+            IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
+            IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}
+

drivers/issi/is31fl3731.h

@@ -23,7 +23,7 @@
 #include <stdbool.h>
 
 typedef struct is31_led {
-	uint8_t driver:2;
+  uint8_t driver:2;
   uint8_t r;
   uint8_t g;
   uint8_t b;

drivers/issi/is31fl3733.c

@@ -0,0 +1,253 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include "is31fl3733.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
+#define ISSI_PAGE_PWM 0x01        //PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
+#define ISSI_PAGE_FUNCTION 0x03   //PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 //PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
+#define ISSI_REG_RESET 0x11// PG3
+#define ISSI_REG_SWPULLUP 0x0F //PG3
+#define ISSI_REG_CSPULLUP 0x10 //PG3
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3733 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
+bool g_led_control_registers_update_required = false;
+
+void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes PG1 is already selected
+
+    // transmit PWM registers in 12 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 192; i += 16 ) {
+        g_twi_transfer_buffer[0] = i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3733_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Unlock the command register.
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG0
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    // Turn off all LEDs.
+    for ( int i = 0x00; i <= 0x17; i++ )
+    {
+        IS31FL3733_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG1
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    // Set PWM on all LEDs to 0
+    // No need to setup Breath registers to PWM as that is the default.
+    for ( int i = 0x00; i <= 0xBF; i++ )
+    {
+        IS31FL3733_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG3
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    // Set global current to maximum.
+    IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    // Disable software shutdown.
+    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+
+    // Wait 10ms to ensure the device has woken up.
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+}
+
+void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        g_pwm_buffer[led.driver][led.r] = red;
+        g_pwm_buffer[led.driver][led.g] = green;
+        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31FL3733_set_color( i, red, green, blue );
+    }
+}
+
+void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+  uint8_t control_register_r = led.r / 8;
+  uint8_t control_register_g = led.g / 8;
+  uint8_t control_register_b = led.b / 8;
+  uint8_t bit_r = led.r % 8;
+  uint8_t bit_g = led.g % 8;
+  uint8_t bit_b = led.b % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG1
+        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+
+        IS31FL3733_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        //IS31FL3733_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG0
+        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        for ( int i=0; i<24; i++ )
+        {
+            IS31FL3733_write_register(addr1, i, g_led_control_registers[0][i] );
+            //IS31FL3733_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}
+

drivers/issi/is31fl3733.h

@@ -0,0 +1,255 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3733_DRIVER_H
+#define IS31FL3733_DRIVER_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3733_init( uint8_t addr );
+void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define A_1  0x00
+#define A_2  0x01
+#define A_3  0x02
+#define A_4  0x03
+#define A_5  0x04
+#define A_6  0x05
+#define A_7  0x06
+#define A_8  0x07
+#define A_9  0x08
+#define A_10  0x09
+#define A_11  0x0A
+#define A_12  0x0B
+#define A_13  0x0C
+#define A_14  0x0D
+#define A_15  0x0E
+#define A_16  0x0F
+
+#define B_1  0x10
+#define B_2  0x11
+#define B_3  0x12
+#define B_4  0x13
+#define B_5  0x14
+#define B_6  0x15
+#define B_7  0x16
+#define B_8  0x17
+#define B_9  0x18
+#define B_10  0x19
+#define B_11  0x1A
+#define B_12  0x1B
+#define B_13  0x1C
+#define B_14  0x1D
+#define B_15  0x1E
+#define B_16  0x1F
+
+#define C_1  0x20
+#define C_2  0x21
+#define C_3  0x22
+#define C_4  0x23
+#define C_5  0x24
+#define C_6  0x25
+#define C_7  0x26
+#define C_8  0x27
+#define C_9  0x28
+#define C_10  0x29
+#define C_11  0x2A
+#define C_12  0x2B
+#define C_13  0x2C
+#define C_14  0x2D
+#define C_15  0x2E
+#define C_16  0x2F
+
+#define D_1  0x30
+#define D_2  0x31
+#define D_3  0x32
+#define D_4  0x33
+#define D_5  0x34
+#define D_6  0x35
+#define D_7  0x36
+#define D_8  0x37
+#define D_9  0x38
+#define D_10  0x39
+#define D_11  0x3A
+#define D_12  0x3B
+#define D_13  0x3C
+#define D_14  0x3D
+#define D_15  0x3E
+#define D_16  0x3F
+
+#define E_1  0x40
+#define E_2  0x41
+#define E_3  0x42
+#define E_4  0x43
+#define E_5  0x44
+#define E_6  0x45
+#define E_7  0x46
+#define E_8  0x47
+#define E_9  0x48
+#define E_10  0x49
+#define E_11  0x4A
+#define E_12  0x4B
+#define E_13  0x4C
+#define E_14  0x4D
+#define E_15  0x4E
+#define E_16  0x4F
+
+#define F_1  0x50
+#define F_2  0x51
+#define F_3  0x52
+#define F_4  0x53
+#define F_5  0x54
+#define F_6  0x55
+#define F_7  0x56
+#define F_8  0x57
+#define F_9  0x58
+#define F_10  0x59
+#define F_11  0x5A
+#define F_12  0x5B
+#define F_13  0x5C
+#define F_14  0x5D
+#define F_15  0x5E
+#define F_16  0x5F
+
+#define G_1  0x60
+#define G_2  0x61
+#define G_3  0x62
+#define G_4  0x63
+#define G_5  0x64
+#define G_6  0x65
+#define G_7  0x66
+#define G_8  0x67
+#define G_9  0x68
+#define G_10  0x69
+#define G_11  0x6A
+#define G_12  0x6B
+#define G_13  0x6C
+#define G_14  0x6D
+#define G_15  0x6E
+#define G_16  0x6F
+
+#define H_1  0x70
+#define H_2  0x71
+#define H_3  0x72
+#define H_4  0x73
+#define H_5  0x74
+#define H_6  0x75
+#define H_7  0x76
+#define H_8  0x77
+#define H_9  0x78
+#define H_10  0x79
+#define H_11  0x7A
+#define H_12  0x7B
+#define H_13  0x7C
+#define H_14  0x7D
+#define H_15  0x7E
+#define H_16  0x7F
+
+#define I_1  0x80
+#define I_2  0x81
+#define I_3  0x82
+#define I_4  0x83
+#define I_5  0x84
+#define I_6  0x85
+#define I_7  0x86
+#define I_8  0x87
+#define I_9  0x88
+#define I_10  0x89
+#define I_11  0x8A
+#define I_12  0x8B
+#define I_13  0x8C
+#define I_14  0x8D
+#define I_15  0x8E
+#define I_16  0x8F
+
+#define J_1  0x90
+#define J_2  0x91
+#define J_3  0x92
+#define J_4  0x93
+#define J_5  0x94
+#define J_6  0x95
+#define J_7  0x96
+#define J_8  0x97
+#define J_9  0x98
+#define J_10  0x99
+#define J_11  0x9A
+#define J_12  0x9B
+#define J_13  0x9C
+#define J_14  0x9D
+#define J_15  0x9E
+#define J_16  0x9F
+
+#define K_1  0xA0
+#define K_2  0xA1
+#define K_3  0xA2
+#define K_4  0xA3
+#define K_5  0xA4
+#define K_6  0xA5
+#define K_7  0xA6
+#define K_8  0xA7
+#define K_9  0xA8
+#define K_10  0xA9
+#define K_11  0xAA
+#define K_12  0xAB
+#define K_13  0xAC
+#define K_14  0xAD
+#define K_15  0xAE
+#define K_16  0xAF
+
+#define L_1  0xB0
+#define L_2  0xB1
+#define L_3  0xB2
+#define L_4  0xB3
+#define L_5  0xB4
+#define L_6  0xB5
+#define L_7  0xB6
+#define L_8  0xB7
+#define L_9  0xB8
+#define L_10  0xB9
+#define L_11  0xBA
+#define L_12  0xBB
+#define L_13  0xBC
+#define L_14  0xBD
+#define L_15  0xBE
+#define L_16  0xBF
+
+#endif // IS31FL3733_DRIVER_H

keyboards/1upkeyboards/1up60hse/1up60hse.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "1up60hse.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/1upkeyboards/1up60hse/1up60hse.h

@@ -0,0 +1,39 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments representing the physical
+// layout of the board and position of the keys
+// The second converts the arguments into a two-dimensional array which 
+// represents the switch matrix. 
+#define LAYOUT_60_ansi( \
+	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,           K3D, \
+	K40, K41, K42,             K45,              K49, K4A, K4B,      K4D  \
+) { \
+	{ K00,  K01,  K02,  K03,   K04,   K05, K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D }, \
+	{ K10,  K11,  K12,  K13,   K14,   K15, K16,   K17,   K18,   K19, K1A, K1B,   K1C,   K1D }, \
+	{ K20,  K21,  K22,  K23,   K24,   K25, K26,   K27,   K28,   K29, K2A, K2B,   KC_NO, K2D }, \
+	{ K30,  K31,  K32,  K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, KC_NO, KC_NO, K3D }, \
+	{ K40,  K41,  K42,  KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B,   KC_NO, K4D }  \
+}
+#endif

keyboards/1upkeyboards/1up60hse/config.h

@@ -0,0 +1,224 @@
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    1upkeyboards
+#define PRODUCT         1up60hse
+#define DESCRIPTION     A custom 60% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
+#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, E6, D1, D0, D2, D3, D5, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/1upkeyboards/1up60hse/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "1up60hse",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/1upkeyboards/1up60hse/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_60_ansi(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(2), KC_RGUI, KC_RCTL),
+
+	[1] = LAYOUT_60_ansi(
+		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+  [2] = LAYOUT_60_ansi(
+		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_STEP, BL_DEC, BL_INC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, RGB_SAI, RGB_HUD, RGB_HUI, RGB_MOD, RGB_TOG, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+

keyboards/1upkeyboards/1up60hse/keymaps/default/readme.md

@@ -0,0 +1,6 @@
+# 1up60hse default keymap
+
+This is the default keymap provided by [1upkeyboards](https://www.1upkeyboards.com).  
+
+## Notes
+- Software reset key is located on `Esc` on the third layer.

keyboards/1upkeyboards/1up60hse/readme.md

@@ -0,0 +1,15 @@
+# 1up60hse (hot swap edition)
+
+![1up60hse](https://i2.wp.com/www.1upkeyboards.com/wp-content/uploads/2018/08/PCB-1up-60-hotswap-group-RGB.jpg?fit=1280%2C1280&ssl=1)
+
+A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a standard ANSI layout.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: 1up60hse 60% PCB.  
+Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-pcb-hse/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 1up60hse:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -0,0 +1,72 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = 60_ansi

keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c

@@ -0,0 +1,130 @@
+//****************************************************************************//
+// raffle's keymap for the 1up60rgb.                                          //
+//   emulates my pok3r layout and adds RGB control + firmware reset/debug     //
+//   layers                                                                   //
+//****************************************************************************//
+
+//************************ dependencies + definitions ************************//
+#include QMK_KEYBOARD_H
+
+// create names for layers
+enum layers {
+  _typing,
+  _raise,
+  _rgb,
+  _adjust
+};
+
+// define layer mods
+#define RAISE MO(_raise)
+#define RGB MO(_rgb)
+
+// define mod masks for making multi-key macros
+#define MODS_SHIFT_MASK  (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTRL))
+#define MODS_ALT_MASK  (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT))
+
+//********************************** Layers **********************************//
+// define layers
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  // typing layer to handle basic typing
+  [_typing] = LAYOUT_all
+  (
+   KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
+   KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+   KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+   KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
+   RAISE, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, RGB, KC_RCTL
+   ),
+  // raise layer to handle function & nav keys
+  [_raise] = LAYOUT_all
+  (
+   KC_GRV,  KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL,
+   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_LSCR, KC_PAUSE, KC_TRNS,
+   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, KC_DEL, KC_TRNS, KC_TRNS,
+   KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+   ),
+  // rgb layer for pretty backlight colors
+  [_rgb] = LAYOUT_all
+  (
+   RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI, RGB_VAI, RGB_HUD, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, RGB_SAI, RGB_VAD,RGB_SAD, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_RMOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+   ),
+  // adjust to handle firmware debug + reset mode
+  [_adjust] = LAYOUT_all
+  (
+   RESET, DEBUG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+   )
+};
+
+//***************************** Function bodies  *****************************//
+// enable tri-layer state for _raise + _rgb = _adjust
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _raise, _rgb, _adjust);
+}
+
+
+// scan matrix
+void matrix_scan_user(void) {
+}
+
+// support for standard mod state keys (caps lock, scroll lock, etc.)
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+  } else {
+    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}
+
+//*********** Empty fxns from default map that I'm not modifying ***********//
+// onboard macro support
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  ;
+
+  switch (id) {
+
+  }
+  return MACRO_NONE;
+}
+
+// initialize matrix 
+void matrix_init_user(void) {
+}
+
+
+

keyboards/1upkeyboards/1up60rgb/keymaps/raffle/readme.md

@@ -0,0 +1,43 @@
+## raffle's keymap
+The default keymap is just enough to get started. This keymap adds a pok3r-like
+raise layer, backlight RGB control layer, and firmware reset/debug adjust layer
+for ANSI layouts.
+
+In the default layer, the following modifications are made (using standard ANSI
+keys for LHS):
+
+- `CAPS` = `LCTRL`
+- `LCTRL` = `RAISE`
+- `APP` = `RGB`
+- `LCTRL` + `APP` (`RAISE` + `RGB`) = `ADJUST`
+- `GRV` = `ESC`
+
+Additionally, the pok3r's `SHIFT` + `ESC` for `~` is maintained (with either `SHIFT`).
+
+### Raise Layer
+Emulates standard pok3r layout (without the onboard macro keys)
+
+Highlights:
+
+- `IJKL` for arrow keys
+- `H`/`N` for `HOME`/`END`
+- `U`/`P` for `PGUP`/`PGDN`
+- `1` - `=` for `F1` - `F12`
+- `Y` for calculator
+
+Other standard keys from the pok3r layout are carried over. See the keymap or
+the pok3r documentation for details.
+
+### RGB Layer
+Uses navigation keys from `RAISE` layer for RGB adjustment
+
+- `I`/`K` for Value (brightness) Increase/Decrease
+- `U`/`P` for Hue (color) Increase/Decrease
+- `H`/`N` for Saturation Incrase/Decrease
+- `GRV` to toggle RGB on/off
+- `1`-`9` to activate QMK's predefined RGB animations
+
+### Adjust Layer
+
+- `GRV` activates firmware reset for flashing
+- `1` enters debug mode

keyboards/1upkeyboards/1up60rgb/readme.md

@@ -4,7 +4,7 @@ Firmware for custom keyboard PCB with 60% key layout.
 
 Keyboard Maintainer: [rempired](https://github.com/rempired)  
 Hardware Supported: 1upkeyboards 60% RGB  
-Hardware Availability: [1upkeyboards](https://1upkeyboards.com/rgb-underglow-1up-pcb.html)
+Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/controllers/1up-rgb-underglow-pcb/)  
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/1upkeyboards/readme.md

@@ -0,0 +1,5 @@
+# 1UP Keyboards
+
+Website: [1UP Keyboards](https://www.1upkeyboards.com/)  
+Discord: [Server Invite](https://discordapp.com/invite/c6SYn8)  
+YouTube: [skiwithpete](https://www.youtube.com/user/skiwithpete)  

keyboards/4x4/4x4.c

@@ -0,0 +1,29 @@
+
+#include "4x4.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/4x4/4x4.h

@@ -0,0 +1,62 @@
+
+#ifndef FOURX4_H
+#define FOURX4_H
+
+#include "quantum.h"
+#define ___ KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_ortho_4x4( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22, K23, \
+    K30, K31, K32, K33 \
+) \
+{ \
+    { K00, K01, K02, K03, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___} \
+}
+#define LAYOUT_ortho_4x8( \
+    K00, K01, K02, K03, K04, K05, K06, K07, \
+    K10, K11, K12, K13, K14, K15, K16, K17, \
+    K20, K21, K22, K23, K24, K25, K26, K27, \
+    K30, K31, K32, K33, K34, K35, K36, K37\
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, ___, ___, ___, ___, ___, ___, ___, ___} \
+}
+#define LAYOUT_ortho_4x12( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b, ___, ___, ___, ___} \
+}
+
+#define LAYOUT_ortho_4x16( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, K0f, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, K1f, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, K2f, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, K3f \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, K0f }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, K1f }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, K2f }, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, K3f } \
+}
+
+#endif

keyboards/4x4/config.h

@@ -0,0 +1,202 @@
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x4444
+#define MANUFACTURER    di0ib
+#define PRODUCT         The 4x4 Keyboard
+#define DESCRIPTION     A modular compact keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B2, D1, D0, D4 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
+#define UNUSED_PINS
+
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN C7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/4x4/keymaps/default/config.h

@@ -0,0 +1,5 @@
+
+
+#pragma once
+
+// place overrides here

keyboards/4x4/keymaps/default/keymap.c

@@ -0,0 +1,124 @@
+
+#include QMK_KEYBOARD_H
+
+#define PAD 0
+#define _QW 1
+#define NUM 2
+#define DIR 3
+
+// Readability keycodes
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Single 4x4 board only
+ * .-----------------------------------.
+ * |   7    |   8    |   9    |   /    |
+ * |--------+--------+--------+--------|
+ * |   4    |   5    |   6    |   *    |
+ * |--------+--------+--------+--------|
+ * |   1    |   2    |   3    |   -    |
+ * |--------+--------+--------+--------|
+ * |   0    | QWERTY |   .    |   +    |
+ * '-----------------------------------'
+ */
+
+  [PAD] = LAYOUT_ortho_4x4(
+  KC_KP_7, KC_KP_8, KC_KP_9,   KC_PSLS,
+  KC_KP_4, KC_KP_5, KC_KP_6,   KC_PAST,
+  KC_KP_1, KC_KP_2, KC_KP_3,   KC_PMNS,
+  KC_KP_0, DF(_QW), KC_KP_DOT, KC_PPLS
+  ),
+
+/* QWERTY
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | BACKSP |   7    |   8    |   9    |   /    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | TAB    | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      |   4    |   5    |   6    |   *    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | SHIFT  | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | ENT/SFT|   1    |   2    |   3    |   -    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | LCTRL  | LGUI   | ALT    | ALT    | NUM    | SHIFT  | SPACE  | DIR    | RGUI   | RALT   | DEL    | CTRL   |   0    |   0    |   .    |   +    |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_QW] = LAYOUT_ortho_4x16(
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, KC_KP_7, KC_KP_8, KC_KP_9, KC_PSLS,
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_T(KC_ENT), KC_KP_1, KC_KP_2, KC_KP_3, KC_PMNS,
+  KC_LCTL, KC_LGUI, KC_LALT, KC_LALT, MO(NUM), KC_LSFT, KC_SPC,  MO(DIR), KC_RGUI, KC_RALT, KC_DEL,  KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT, KC_PPLS
+  ),
+
+/* NUMBERS
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | NUMLOCK|   /    |   *    |   -    |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |    `   | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |        |        |        |   +    |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F11    | F12    |        |        |        | ENTER  | SHIFT  | RGUI   | ./ALT  | BKSC   |        |        |        | ENTER  |        |
+ * |        |        |        |        |        |        |        |        |        |        |CTRLhold|		   |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|        |
+ * |        |        |        |        |        |        | ENTER  | SHIFT  |        |        |        |        |        |        |        |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [NUM] = LAYOUT_ortho_4x16(
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, _______,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS, _______,
+  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, _______,
+  _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______, _______
+  ),
+
+/* DIRECTIONS
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * | RESET  | TAB    |   up   |        | INS    | CTRL   | SHIFT  | PgUp   | Home   |   -    |   =    |  DEL   |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | CAPSLK | left   |  down  | right  | PrScr  | SHIFT  | CTRL   | PgDn   | End    |   [    |   ]    |   \    |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | P-Brk  |        |        |        |        |        |        | RGUI   | ALT    |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | KEYPAD |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [DIR] = LAYOUT_ortho_4x16(
+  RESET,   KC_TAB,  KC_UP,   _______, KC_INS,  KC_LCTL, KC_LSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,  KC_DEL,  _______, _______, _______, _______,
+  KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_LCTL, KC_PGDN, KC_END,  KC_LBRC, KC_RBRC, KC_BSLS, _______, _______, _______, _______,
+  _______, KC_PAUS, _______, _______, _______, _______, _______, _______, KC_RGUI, KC_RALT, _______, _______, _______, _______, _______, _______,
+  DF(PAD), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  keyevent_t event = record->event;
+    (void)event;
+
+  switch (id) {
+
+  }
+  return MACRO_NONE;
+}
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/4x4/readme.md

@@ -0,0 +1,23 @@
+# 4x4
+
+![4x4](https://2.bp.blogspot.com/-xRZOpwlTT4c/WlOwRIVAecI/AAAAAAACKo4/d75juHTX2W0Nrch7NigssMbagvl3I4w_ACEwYBhgL/s1600/e.jpg)
+===
+
+**Modular keypad/keyboard**  
+The basic unit is a 4x4 matrix with 16 keys. Up to 4 of these can be connected to each other side by side.  
+4x4, 4x8, 4x12 and 4x16 are possible.  
+There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers.  
+**_All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro)._**  
+
+* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/4x4)
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: 4x4 PCB  
+Hardware Availability: [4x4x4x4x4 project on 40% Keyboards](http://www.40percent.club/2018/01/4x4x4x4x4.html)  
+
+Make example for this keyboard (after setting up your build environment):  
+
+    make 4x4:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.  
+First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.  

keyboards/4x4/rules.mk

@@ -0,0 +1,74 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16 

keyboards/5x5/5x5.c

@@ -0,0 +1,29 @@
+
+#include "5x5.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/5x5/5x5.h

@@ -0,0 +1,57 @@
+
+#ifndef FIVEX5_H
+#define FIVEX5_H
+
+#include "quantum.h"
+#define ___ KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_ortho_5x5( \
+    K00, K01, K02, K03, K04, \
+    K10, K11, K12, K13, K14, \
+    K20, K21, K22, K23, K24, \
+    K30, K31, K32, K33, K34, \
+    K40, K41, K42, K43, K44 \
+) \
+{ \
+    { K00, K01, K02, K03, K04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, K14, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, K24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, K34, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K40, K41, K42, K43, K44, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___} \
+}
+
+#define LAYOUT_ortho_5x10( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49 \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, ___, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, ___, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, ___, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, ___, ___, ___, ___, ___}, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, ___, ___, ___, ___, ___} \
+}
+
+#define LAYOUT_ortho_5x15( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e}, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e}, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b, K3c, K3d, K3e}, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e} \
+}
+
+#endif

keyboards/5x5/config.h

@@ -0,0 +1,208 @@
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x05B5
+#define MANUFACTURER    di0ib
+#define PRODUCT         The 5x5 Keyboard
+#define DESCRIPTION     A 25 or 50 or 75 key keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B2, D1, D0, D4, C6 }
+#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/

keyboards/5x5/keymaps/default/config.h

@@ -0,0 +1,5 @@
+
+
+#pragma once
+
+// place overrides here

keyboards/5x5/keymaps/default/keymap.c

@@ -0,0 +1,139 @@
+
+#include QMK_KEYBOARD_H
+
+#define PAD 0
+#define _QW 1
+#define NUM 2
+#define DIR 3
+
+// Readability keycodes
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Single 5x5 board only
+ * .--------------------------------------------.
+ * | QWERTY |   /    |   *    |   -    |        |
+ * |--------+--------+--------+--------+--------|
+ * |   7    |   8    |   9    |   +    |        |
+ * |--------+--------+--------+--------+--------|
+ * |   4    |   5    |   6    |   +    |        |
+ * |--------+--------+--------+--------+--------|
+ * |   1    |   2    |   3    | ENTER  |        |
+ * |--------+--------+--------+--------+--------|
+ * |   0    |   0    |   .    | ENTER  |        |
+ * '--------------------------------------------'
+ */
+
+  [PAD] = LAYOUT_ortho_5x5(
+  DF(_QW), KC_PSLS, KC_PAST,   KC_PMNS, _______,
+  KC_KP_7, KC_KP_8, KC_KP_9,   KC_PPLS, _______,
+  KC_KP_4, KC_KP_5, KC_KP_6,   KC_PPLS, _______,
+  KC_KP_1, KC_KP_2, KC_KP_3,   KC_PENT, _______,
+  KC_KP_0, KC_KP_0, KC_KP_DOT, KC_PENT, _______
+  ),
+
+/* QWERTY
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | ESC    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | BACKSP |   7    |   8    |   9    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | TAB    | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      |   4    |   5    |   6    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | SHIFT  | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | ENT/SFT|   1    |   2    |   3    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | LCTRL  | LGUI   | ALT    | ALT    | NUM    | SHIFT  | SPACE  | DIR    | RGUI   | RALT   | DEL    | CTRL   |   0    |   0    |   .    |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_QW] = LAYOUT_ortho_5x15(
+  _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, _______, _______, _______,
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, KC_KP_7, KC_KP_8, KC_KP_9,
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_KP_4, KC_KP_5, KC_KP_6,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_T(KC_ENT), KC_KP_1, KC_KP_2, KC_KP_3,
+  KC_LCTL, KC_LGUI, KC_LALT, KC_LALT, MO(NUM), KC_LSFT, KC_SPC,  MO(DIR), KC_RGUI, KC_RALT, KC_DEL,  KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT
+  ),
+
+/* NUMBERS
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | NUMLOCK|   /    |   *    |   -    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |    `   | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |        |        |        |   +    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F11    | F12    |        |        |        | ENTER  | SHIFT  | RGUI   | ./ALT  | BKSC   |        |        |        | ENTER  |
+ * |        |        |        |        |        |        |        |        |        |        |CTRLhold|		     |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        | ENTER  | SHIFT  |        |        |        |        |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [NUM] = LAYOUT_ortho_5x15(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS,
+  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT,
+  _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______
+  ),
+
+/* DIRECTIONS
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | RESET  | TAB    |   up   |        | INS    | CTRL   | SHIFT  | PgUp   | Home   |   -    |   =    |  DEL   |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | CAPSLK | left   |  down  | right  | PrScr  | SHIFT  | CTRL   | PgDn   | End    |   [    |   ]    |   \    |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | P-Brk  |        |        |        |        |        |        | RGUI   | ALT    |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | KEYPAD |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [DIR] = LAYOUT_ortho_5x15(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  RESET,   KC_TAB,  KC_UP,   _______, KC_INS,  KC_LCTL, KC_LSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,  KC_DEL,  _______, _______, _______,
+  KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_LCTL, KC_PGDN, KC_END,  KC_LBRC, KC_RBRC, KC_BSLS, _______, _______, _______,
+  _______, KC_PAUS, _______, _______, _______, _______, _______, _______, KC_RGUI, KC_RALT, _______, _______, _______, _______, _______,
+  DF(PAD), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/5x5/readme.md

@@ -0,0 +1,23 @@
+# 5x5
+
+![5x5](https://3.bp.blogspot.com/-bKOfUyMtdrE/WqGA_03kGZI/AAAAAAACPtY/DsHDTQS0IlMD3ie8HHlf1ATRUAwpZdcSgCLcBGAs/s1600/c.jpg)  
+===  
+
+**Modular Keypad/Keyboard**  
+The basic unit is a 5x5 matrix with 25 keys. Up to 3 of these can be connected to each other side by side.  
+5x5, 5x10, and 5x15 matrices are possible.  
+There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers.  
+**_All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro)._**  
+
+* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/5x5)
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: 5x5 PCB   
+Hardware Availability: [5x5 project on 40% Keyboards](http://www.40percent.club/2018/04/5x5.html)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 5x5:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.    
+First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.  

keyboards/5x5/rules.mk

@@ -0,0 +1,74 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = ortho_5x5  ortho_5x10  ortho_5x15

keyboards/al1/info.json

@@ -5,12 +5,11 @@
   "width": 20.5,
   "height": 5.25,
   "layouts": {
-      "LAYOUT": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"\u2191", "x":15.25, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}, {"label":"\u2190", "x":14.25, "y":4.25}, {"label":"\u2193", "x":15.25, "y":4.25}, {"label":"\u2192", "x":16.25, "y":4.25}]
-      },
-
-      "LAYOUT_split_bs": {
-        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"\u2191", "x":15.25, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}, {"label":"\u2190", "x":14.25, "y":4.25}, {"label":"\u2193", "x":15.25, "y":4.25}, {"label":"\u2192", "x":16.25, "y":4.25}]
-      }
+    "LAYOUT": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"↑", "x":15.25, "y":3.25}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"←", "x":14.25, "y":4.25}, {"label":"↓", "x":15.25, "y":4.25}, {"label":"→", "x":16.25, "y":4.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}]
+    },
+    "LAYOUT_split_bs": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"↑", "x":15.25, "y":3.25}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"←", "x":14.25, "y":4.25}, {"label":"↓", "x":15.25, "y":4.25}, {"label":"→", "x":16.25, "y":4.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}]
+    }
   }
 }

keyboards/al1/keymaps/default/keymap.c

@@ -20,22 +20,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_ESC,  KC_1,    KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  KC_INS,   KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,\
        KC_TAB,  KC_Q,    KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
        KC_CAPS, KC_A,    KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENT,                 KC_P4,    KC_P5,    KC_P6,          \
-       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_FN0,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
-       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_FN0,  KC_RGUI,  KC_RCTRL,                                         KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_P0,    KC_PDOT         ),
+       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  MO(1),          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
+       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   MO(1),  KC_RGUI,  KC_RCTRL,                                         KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_P0,    KC_PDOT         ),
 
        [1] = LAYOUT(\
        KC_ESC,  KC_F1,    KC_F2,     KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,    KC_F8,     KC_F9,     KC_F10,     KC_F11,  KC_F12,    KC_BSPC,  KC_INS,   KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,\
-       KC_TAB,  KC_Q,    KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
+       KC_TAB,  KC_Q,    KC_W,     KC_E,    RESET,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
        KC_CAPS, KC_A,    KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENT,                 KC_P4,    KC_P5,    KC_P6,          \
-       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_FN0,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
-       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_FN0,  KC_RGUI,  KC_RCTRL,                                         KC_FN1,  KC_FN2,  KC_FN3, KC_P0,    KC_PDOT         ),
+       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_TRNS,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
+       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_TRNS,  KC_RGUI,  KC_RCTRL,                                         BL_TOGG,  BL_DEC,  BL_INC, KC_P0,    KC_PDOT         ),
 };
 
 
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
   // MACRODOWN only works in this function

keyboards/al1/keymaps/splitbs/keymap.c

@@ -5,14 +5,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_ESC,  KC_1,    KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_GRAVE, KC_BSPC,  KC_INS,   KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS, \
        KC_TAB,  KC_Q,    KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
        KC_CAPS, KC_A,    KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENT,                 KC_P4,    KC_P5,    KC_P6,          \
-       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_FN0,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
-       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_FN0,  KC_RGUI,  KC_RCTRL,                                         KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_P0,    KC_PDOT         ),
+       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  MO(1),          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
+       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   MO(1),  KC_RGUI,  KC_RCTRL,                                         KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_P0,    KC_PDOT         ),
         [1] = LAYOUT_split_bs(\
         KC_ESC,  KC_F1,    KC_F2,     KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,    KC_F8,     KC_F9,     KC_F10,     KC_F11,  KC_F12,   KC_GRAVE, KC_DELETE,  KC_INS,   KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS, \
-        KC_TAB,  KC_Q,    KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
+        KC_TAB,  KC_Q,    KC_W,     KC_E,     RESET,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
         KC_CAPS, KC_A,    KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENT,                 KC_P4,    KC_P5,    KC_P6,          \
-        KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_FN0,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
-        KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_FN0,  KC_RGUI,  KC_RCTRL,                                         KC_FN1,  KC_FN2,  KC_FN3, KC_P0,    KC_PDOT         ),
+        KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_TRNS,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
+        KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_TRNS,  KC_RGUI,  KC_RCTRL,                                         BL_TOGG,  BL_DEC,  BL_INC, KC_P0,    KC_PDOT         ),
 };
 
 const uint16_t PROGMEM fn_actions[] = {

keyboards/al1/rules.mk

@@ -60,7 +60,8 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/alf_x2/alf_x2.h

@@ -91,7 +91,7 @@
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 },  \
 	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 },  \
 	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_N), K313,  K314 },  \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 },  \
 	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }   \
 }