Keyboard: add Wavelet (#3739)

* Add Wavelet keyboard

* Fix build error for keyboards w/o Planck MIT layout

* Add swap hands support

docs/_sidebar.md

@@ -1,36 +1,50 @@
-* [Getting Started](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [Install Build Tools](getting_started_build_tools.md)
-    * Alternative: [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
 * [Complete Newbs Guide](newbs.md)
   * [Getting Started](newbs_getting_started.md)
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
 
+* [QMK Basics](README.md)
+  * [QMK Introduction](getting_started_introduction.md)
+  * [Contributing to QMK](contributing.md)
+  * [How to Use Github](getting_started_github.md)
+  * [Getting Help](getting_started_getting_help.md)
+
 * [FAQ](faq.md)
   * [General FAQ](faq_general.md)
   * [Build/Compile QMK](faq_build.md)
   * [Debugging/Troubleshooting QMK](faq_debug.md)
   * [Keymap](faq_keymap.md)
 
+* Detailed Guides
+  * [Install Build Tools](getting_started_build_tools.md)
+  * [Vagrant Guide](getting_started_vagrant.md)
+  * [Build/Compile Instructions](getting_started_make_guide.md)
+  * [Flashing Firmware](flashing.md)
+  * [Customizing Functionality](custom_quantum_functions.md)
+  * [Keymap Overview](keymap.md)
+
 * [Hardware](hardware.md)
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
   * [AVR Processors](hardware_avr.md)
-  * ARM Processors (TBD)
   * [Drivers](hardware_drivers.md)
 
+* Reference
+  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
+  * [Config Options](config_options.md)
+  * [Keycodes](keycodes.md)
+  * [Documentation Best Practices](documentation_best_practices.md)
+  * [Documentation Templates](documentation_templates.md)
+  * [Glossary](reference_glossary.md)
+  * [Unit Testing](unit_testing.md)
+
 * [Features](features.md)
+  * [Basic Keycodes](keycodes_basic.md)
+  * [Quantum Keycodes](quantum_keycodes.md)
   * [Advanced Keycodes](feature_advanced_keycodes.md)
   * [Audio](feature_audio.md)
   * [Auto Shift](feature_auto_shift.md)
   * [Backlight](feature_backlight.md)
+  * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
@@ -40,6 +54,7 @@
   * [Leader Key](feature_leader_key.md)
   * [Macros](feature_macros.md)
   * [Mouse Keys](feature_mouse_keys.md)
+  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
   * [Pointing Device](feature_pointing_device.md)
   * [PS/2 Mouse](feature_ps2_mouse.md)
   * [RGB Lighting](feature_rgblight.md)
@@ -53,36 +68,8 @@
   * [Thermal Printer](feature_thermal_printer.md)
   * [Unicode](feature_unicode.md)
   * [Userspace](feature_userspace.md)
-
-* [Keycodes](keycodes.md)
-  * [Basic](keycodes_basic.md)
-  * [Quantum](quantum_keycodes.md)
-  * [Audio](feature_audio.md#audio-keycodes)
-  * [Backlight](feature_backlight.md#backlight-keycodes)
-  * [Bluetooth](feature_bluetooth.md#bluetooth-keycodes)
-  * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
-  * [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
-  * [Mod+Key](feature_advanced_keycodes.md#modifier-keys)
-  * [Mod Tap](feature_advanced_keycodes.md#mod-tap)
-  * [Mouse Keys](feature_mouse_keys.md#mapping-mouse-actions-to-keyboard-keys)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [RGB Light](feature_rgblight.md#rgblight-keycodes)
-  * [RGB Matrix](feature_rgb_matrix.md#keycodes)
-  * [Shifted Keys](feature_advanced_keycodes.md#shifted-keycodes)
-  * [Stenography](feature_stenography.md#keycode-reference)
-  * [Swap Hands](feature_swap_hands.md#swap-keycodes)
-  * [Thermal Printer](feature_thermal_printer.md#thermal-printer-keycodes)
   * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
 
-* Reference
-  * [Config Options](config_options.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
-  * [Glossary](reference_glossary.md)
-  * [Keymap Overview](keymap.md)
-  * [Unit Testing](unit_testing.md)
-
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)

docs/_summary.md

@@ -1,36 +1,50 @@
-* [Getting Started](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [Install Build Tools](getting_started_build_tools.md)
-    * Alternative: [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
 * [Complete Newbs Guide](newbs.md)
   * [Getting Started](newbs_getting_started.md)
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
 
+* [QMK Basics](README.md)
+  * [QMK Introduction](getting_started_introduction.md)
+  * [Contributing to QMK](contributing.md)
+  * [How to Use Github](getting_started_github.md)
+  * [Getting Help](getting_started_getting_help.md)
+
 * [FAQ](faq.md)
   * [General FAQ](faq_general.md)
   * [Build/Compile QMK](faq_build.md)
   * [Debugging/Troubleshooting QMK](faq_debug.md)
   * [Keymap](faq_keymap.md)
 
+* Detailed Guides
+  * [Install Build Tools](getting_started_build_tools.md)
+  * [Vagrant Guide](getting_started_vagrant.md)
+  * [Build/Compile Instructions](getting_started_make_guide.md)
+  * [Flashing Firmware](flashing.md)
+  * [Customizing Functionality](custom_quantum_functions.md)
+  * [Keymap Overview](keymap.md)
+
 * [Hardware](hardware.md)
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
   * [AVR Processors](hardware_avr.md)
-  * ARM Processors (TBD)
   * [Drivers](hardware_drivers.md)
 
+* Reference
+  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
+  * [Config Options](config_options.md)
+  * [Keycodes](keycodes.md)
+  * [Documentation Best Practices](documentation_best_practices.md)
+  * [Documentation Templates](documentation_templates.md)
+  * [Glossary](reference_glossary.md)
+  * [Unit Testing](unit_testing.md)
+
 * [Features](features.md)
+  * [Basic Keycodes](keycodes_basic.md)
+  * [Quantum Keycodes](quantum_keycodes.md)
   * [Advanced Keycodes](feature_advanced_keycodes.md)
   * [Audio](feature_audio.md)
   * [Auto Shift](feature_auto_shift.md)
   * [Backlight](feature_backlight.md)
+  * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
@@ -40,6 +54,7 @@
   * [Leader Key](feature_leader_key.md)
   * [Macros](feature_macros.md)
   * [Mouse Keys](feature_mouse_keys.md)
+  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
   * [Pointing Device](feature_pointing_device.md)
   * [PS/2 Mouse](feature_ps2_mouse.md)
   * [RGB Lighting](feature_rgblight.md)
@@ -53,36 +68,8 @@
   * [Thermal Printer](feature_thermal_printer.md)
   * [Unicode](feature_unicode.md)
   * [Userspace](feature_userspace.md)
-
-* [Keycodes](keycodes.md)
-  * [Basic](keycodes_basic.md)
-  * [Quantum](quantum_keycodes.md)
-  * [Audio](feature_audio.md#audio-keycodes)
-  * [Backlight](feature_backlight.md#backlight-keycodes)
-  * [Bluetooth](feature_bluetooth.md#bluetooth-keycodes)
-  * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
-  * [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
-  * [Mod+Key](feature_advanced_keycodes.md#modifier-keys)
-  * [Mod Tap](feature_advanced_keycodes.md#mod-tap)
-  * [Mouse Keys](feature_mouse_keys.md#mapping-mouse-actions-to-keyboard-keys)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [RGB Light](feature_rgblight.md#rgblight-keycodes)
-  * [RGB Matrix](feature_rgb_matrix.md#keycodes)
-  * [Shifted Keys](feature_advanced_keycodes.md#shifted-keycodes)
-  * [Stenography](feature_stenography.md#keycode-reference)
-  * [Swap Hands](feature_swap_hands.md#swap-keycodes)
-  * [Thermal Printer](feature_thermal_printer.md#thermal-printer-keycodes)
   * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
 
-* Reference
-  * [Config Options](config_options.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
-  * [Glossary](reference_glossary.md)
-  * [Keymap Overview](keymap.md)
-  * [Unit Testing](unit_testing.md)
-
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)

docs/config_options.md

@@ -199,6 +199,8 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
 
 * `DEFAULT_FOLDER`
   * Used to specify a default folder when a keyboard has more than one sub-folder.
+* `FIRMWARE_FORMAT`
+  * Defines which format (bin, hex) is copied to the root `qmk_firmware` folder after building.
 * `SRC`
   * Used to add files to the compilation/linking list.
 * `LAYOUTS`

docs/faq_keymap.md

@@ -11,8 +11,8 @@ Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_f
 
 There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JIS. North America primarily uses ANSI, Europe and Africa primarily use ISO, and Japan uses JIS. Regions not mentioned typically use either ANSI or ISO. The keycodes corresponding to these layouts are shown here:
 
-<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/9ce023dc6caadc0cf11c88c782350a8c -->
-![Keyboard Layout Image](https://i.imgur.com/45m4mRf.png)
+<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/070a530eedaed36a2d77f3f6fd455677 -->
+![Keyboard Layout Image](https://i.imgur.com/gvlNUpQ.png)
 
 ## Some Of My Keys Are Swapped Or Not Working
 
@@ -34,12 +34,11 @@ See [issue #168](https://github.com/tmk/tmk_keyboard/issues/168) and
 * http://en.wikipedia.org/wiki/Magic_SysRq_key
 * http://en.wikipedia.org/wiki/System_request
 
-## Power Key Doesn't Work
-Use `KC_PWR` instead of `KC_POWER` or vice versa.
-* `KC_PWR` works with Windows and Linux, not with OSX.
-* `KC_POWER` works with OSX and Linux, not with Windows.
+## Power Keys Aren't Working
 
-More info: http://geekhack.org/index.php?topic=14290.msg1327264#msg1327264
+Somewhat confusingly, there are two "Power" keycodes in QMK: `KC_POWER` in the Keyboard/Keypad HID usage page, and `KC_SYSTEM_POWER` (or `KC_PWR`) in the Consumer page.
+
+The former is only recognized on macOS, while the latter, `KC_SLEP` and `KC_WAKE` are supported by all three major operating systems, so it is recommended to use those instead. Under Windows, these keys take effect immediately, however on macOS they must be held down until a dialog appears.
 
 ## One Shot Modifier
 Solves my personal 'the' problem. I often got 'the' or 'THe' wrongly instead of 'The'.  One Shot Shift mitigates this for me.

docs/feature_advanced_keycodes.md

@@ -1,6 +1,6 @@
 # Advanced Keycodes
 
-Your keymap can include keycodes that are more advanced than normal, for example shifted keys. This page documents the functions that are available to you.
+Your keymap can include keycodes that are more advanced than normal, for example keys that switch layers or send modifiers when held, but send regular keycodes when tapped. This page documents the functions that are available to you.
 
 ### Assigning Custom Names
 
@@ -73,34 +73,6 @@ You can also chain these, like this:
 
     LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress.
 
-# Shifted Keycodes
-
-The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols.
-
-|Key                     |Aliases           |Description        |
-|------------------------|------------------|-------------------|
-|`KC_TILDE`              |`KC_TILD`         |`~`                |
-|`KC_EXCLAIM`            |`KC_EXLM`         |`!`                |
-|`KC_AT`                 |                  |`@`                |
-|`KC_HASH`               |                  |`#`                |
-|`KC_DOLLAR`             |`KC_DLR`          |`$`                |
-|`KC_PERCENT`            |`KC_PERC`         |`%`                |
-|`KC_CIRCUMFLEX`         |`KC_CIRC`         |`^`                |
-|`KC_AMPERSAND`          |`KC_AMPR`         |`&`                |
-|`KC_ASTERISK`           |`KC_ASTR`         |`*`                |
-|`KC_LEFT_PAREN`         |`KC_LPRN`         |`(`                |
-|`KC_RIGHT_PAREN`        |`KC_RPRN`         |`)`                |
-|`KC_UNDERSCORE`         |`KC_UNDS`         |`_`                |
-|`KC_PLUS`               |                  |`+`                |
-|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`         |`{`                |
-|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`         |`}`                |
-|`KC_PIPE`               |                  |<code>&#124;</code>|
-|`KC_COLON`              |`KC_COLN`         |`:`                |
-|`KC_DOUBLE_QUOTE`       |`KC_DQT`/`KC_DQUO`|`"`                |
-|`KC_LEFT_ANGLE_BRACKET` |`KC_LT`/`KC_LABK` |`<`                |
-|`KC_RIGHT_ANGLE_BRACKET`|`KC_GT`/`KC_RABK` |`>`                |
-|`KC_QUESTION`           |`KC_QUES`         |`?`                |
-
 # Mod Tap
 
 `MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down.

docs/features.md

@@ -3,7 +3,7 @@
 QMK has a staggering number of features for building your keyboard. It can take some time to understand all of them and determine which one will achieve your goal.
 
 
-* [Advanced Keycodes](feature_advanced_keycodes.md) - Change layers, type shifted keys, and more. Go beyond typing simple characters.
+* [Advanced Keycodes](feature_advanced_keycodes.md) - Change layers, dual-action keys, and more. Go beyond typing simple characters.
 * [Audio](feature_audio.md) - Connect a speaker to your keyboard for audio feedback, midi support, and music mode.
 * [Auto Shift](feature_auto_shift.md) - Tap for the normal key, hold slightly longer for its shifted state.
 * [Backlight](feature_backlight.md) - LED lighting support for your keyboard.

docs/keycodes.md

@@ -402,7 +402,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`PRINT_ON` |Start printing everything the user types|
 |`PRINT_OFF`|Stop printing everything the user types |
 
-## [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
+## [US ANSI Shifted Symbols](keycodes_us_ansi_shifted.md)
 
 |Key                     |Aliases            |Description        |
 |------------------------|-------------------|-------------------|

drivers/arm/i2c_master.c

@@ -0,0 +1,103 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ */
+
+#include "i2c_master.h"
+#include <string.h>
+#include <hal.h>
+
+static uint8_t i2c_address;
+
+// This configures the I2C clock to 400Mhz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+static const I2CConfig i2cconfig = {
+  STM32_TIMINGR_PRESC(15U) |
+  STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) |
+  STM32_TIMINGR_SCLH(15U)  | STM32_TIMINGR_SCLL(21U),
+  0,
+  0
+};
+
+void i2c_init(void)
+{
+  palSetGroupMode(GPIOB,6,7, PAL_MODE_INPUT);       // Try releasing special pins for a short time
+  chThdSleepMilliseconds(10);
+
+  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+
+  //i2cInit(); //This is invoked by halInit() so no need to redo it.
+}
+
+// This is usually not needed
+uint8_t i2c_start(uint8_t address)
+{
+  i2c_address = address;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+  return 0;
+}
+
+uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+{
+  i2c_address = address;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
+}
+
+uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+{
+  i2c_address = address;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+  return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
+}
+
+uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+{
+  i2c_address = devaddr;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+
+  uint8_t complete_packet[length + 1];
+  for(uint8_t i = 0; i < length; i++)
+  {
+    complete_packet[i+1] = data[i];
+  }
+  complete_packet[0] = regaddr
+
+  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
+}
+
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+{
+  i2c_address = devaddr;
+  i2cStart(&I2C_DRIVER, &i2cconfig);
+  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
+}
+
+// This is usually not needed. It releases the driver to allow pins to become GPIO again.
+uint8_t i2c_stop(uint16_t timeout)
+{
+  i2c_address = address;
+  i2cStop(&I2C_DRIVER);
+  return 0;
+}

drivers/arm/i2c_master.h

@@ -0,0 +1,39 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free sofare: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Sofare Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ */
+
+#include "ch.h"
+#include <hal.h>
+
+#ifndef I2C_DRIVER
+  #define I2C_DRIVER I2CD1
+#endif
+
+void i2c_init(void);
+uint8_t i2c_start(uint8_t address);
+uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+void i2c_stop(void);

drivers/avr/is31fl3731.c

@@ -1,262 +0,0 @@
-/* Copyright 2017 Jason Williams
- * Copyright 2018 Jack Humbert
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "is31fl3731.h"
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include <string.h>
-#include "i2c_master.h"
-#include "progmem.h"
-
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define ISSI_ADDR_DEFAULT 0x74
-
-#define ISSI_REG_CONFIG  0x00
-#define ISSI_REG_CONFIG_PICTUREMODE 0x00
-#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
-#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
-
-#define ISSI_CONF_PICTUREMODE 0x00
-#define ISSI_CONF_AUTOFRAMEMODE 0x04
-#define ISSI_CONF_AUDIOMODE 0x08
-
-#define ISSI_REG_PICTUREFRAME  0x01
-
-#define ISSI_REG_SHUTDOWN 0x0A
-#define ISSI_REG_AUDIOSYNC 0x06
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-
-#ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
-#endif
-
-#ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
-#endif
-
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
-
-// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
-// Storing them like this is optimal for I2C transfers to the registers.
-// We could optimize this and take out the unused registers from these
-// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
-// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required = false;
-
-uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
-
-// This is the bit pattern in the LED control registers
-// (for matrix A, add one to register for matrix B)
-//
-//  reg -  b7  b6  b5  b4  b3  b2  b1  b0
-// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
-// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
-// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
-// 0x06 -  - , - , - , - , - ,B02,B01,B00
-// 0x08 -  - , - , - , - , - , - , - , -
-// 0x0A - B17,B16,B15, - , - , - , - , -
-// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
-// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
-// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
-
-
-void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
-	g_twi_transfer_buffer[0] = reg;
-	g_twi_transfer_buffer[1] = data;
-
-  #if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
-    }
-  #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
-}
-
-void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
-	// assumes bank is already selected
-
-	// transmit PWM registers in 9 transfers of 16 bytes
-	// g_twi_transfer_buffer[] is 20 bytes
-
-	// iterate over the pwm_buffer contents at 16 byte intervals
-	for ( int i = 0; i < 144; i += 16 ) {
-		// set the first register, e.g. 0x24, 0x34, 0x44, etc.
-		g_twi_transfer_buffer[0] = 0x24 + i;
-		// copy the data from i to i+15
-		// device will auto-increment register for data after the first byte
-		// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
-		for ( int j = 0; j < 16; j++ ) {
-			g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
-		}
-
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
-	}
-}
-
-void IS31FL3731_init( uint8_t addr )
-{
-	// In order to avoid the LEDs being driven with garbage data
-	// in the LED driver's PWM registers, first enable software shutdown,
-	// then set up the mode and other settings, clear the PWM registers,
-	// then disable software shutdown.
-
-	// select "function register" bank
-	IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
-
-	// enable software shutdown
-	IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
-	// this delay was copied from other drivers, might not be needed
-	_delay_ms( 10 );
-
-	// picture mode
-	IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
-	// display frame 0
-	IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
-	// audio sync off
-	IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
-
-	// select bank 0
-	IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
-
-	// turn off all LEDs in the LED control register
-	for ( int i = 0x00; i <= 0x11; i++ )
-	{
-		IS31FL3731_write_register( addr, i, 0x00 );
-	}
-
-	// turn off all LEDs in the blink control register (not really needed)
-	for ( int i = 0x12; i <= 0x23; i++ )
-	{
-		IS31FL3731_write_register( addr, i, 0x00 );
-	}
-
-	// set PWM on all LEDs to 0
-	for ( int i = 0x24; i <= 0xB3; i++ )
-	{
-		IS31FL3731_write_register( addr, i, 0x00 );
-	}
-
-	// select "function register" bank
-	IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
-
-	// disable software shutdown
-	IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
-
-	// select bank 0 and leave it selected.
-	// most usage after initialization is just writing PWM buffers in bank 0
-	// as there's not much point in double-buffering
-	IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
-
-}
-
-void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-	if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
-		is31_led led = g_is31_leds[index];
-
-		// Subtract 0x24 to get the second index of g_pwm_buffer
-		g_pwm_buffer[led.driver][led.r - 0x24] = red;
-		g_pwm_buffer[led.driver][led.g - 0x24] = green;
-		g_pwm_buffer[led.driver][led.b - 0x24] = blue;
-		g_pwm_buffer_update_required = true;
-	}
-}
-
-void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-	for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-	{
-		IS31FL3731_set_color( i, red, green, blue );
-	}
-}
-
-void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
-	is31_led led = g_is31_leds[index];
-
-  uint8_t control_register_r = (led.r - 0x24) / 8;
-  uint8_t control_register_g = (led.g - 0x24) / 8;
-  uint8_t control_register_b = (led.b - 0x24) / 8;
-  uint8_t bit_r = (led.r - 0x24) % 8;
-  uint8_t bit_g = (led.g - 0x24) % 8;
-  uint8_t bit_b = (led.b - 0x24) % 8;
-
-	if ( red ) {
-		g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
-	} else {
-		g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
-	}
-	if ( green ) {
-		g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
-	} else {
-		g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
-	}
-	if ( blue ) {
-		g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
-	} else {
-		g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
-	}
-
-	g_led_control_registers_update_required = true;
-
-}
-
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
-{
-	if ( g_pwm_buffer_update_required )
-	{
-		IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-		IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
-	}
-	g_pwm_buffer_update_required = false;
-}
-
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
-{
-	if ( g_led_control_registers_update_required )
-	{
-		for ( int i=0; i<18; i++ )
-		{
-			IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
-			IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
-		}
-	}
-}
-

drivers/is31fl3731.c

@@ -0,0 +1,271 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include "is31fl3731.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define ISSI_ADDR_DEFAULT 0x74
+
+#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00
+#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
+#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+
+#define ISSI_CONF_PICTUREMODE 0x00
+#define ISSI_CONF_AUTOFRAMEMODE 0x04
+#define ISSI_CONF_AUDIOMODE 0x08
+
+#define ISSI_REG_PICTUREFRAME  0x01
+
+#define ISSI_REG_SHUTDOWN 0x0A
+#define ISSI_REG_AUDIOSYNC 0x06
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][144];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
+bool g_led_control_registers_update_required = false;
+
+// This is the bit pattern in the LED control registers
+// (for matrix A, add one to register for matrix B)
+//
+//  reg -  b7  b6  b5  b4  b3  b2  b1  b0
+// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
+// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
+// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
+// 0x06 -  - , - , - , - , - ,B02,B01,B00
+// 0x08 -  - , - , - , - , - , - , - , -
+// 0x0A - B17,B16,B15, - , - , - , - , -
+// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
+// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
+// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
+
+
+void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes bank is already selected
+
+    // transmit PWM registers in 9 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 144; i += 16 ) {
+        // set the first register, e.g. 0x24, 0x34, 0x44, etc.
+        g_twi_transfer_buffer[0] = 0x24 + i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, first enable software shutdown,
+    // then set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // select "function register" bank
+    IS31_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+
+    // enable software shutdown
+    IS31_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
+    // this delay was copied from other drivers, might not be needed
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+
+    // picture mode
+    IS31_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
+    // display frame 0
+    IS31_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
+    // audio sync off
+    IS31_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
+
+    // select bank 0
+    IS31_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+
+    // turn off all LEDs in the LED control register
+    for ( int i = 0x00; i <= 0x11; i++ )
+    {
+        IS31_write_register( addr, i, 0x00 );
+    }
+
+    // turn off all LEDs in the blink control register (not really needed)
+    for ( int i = 0x12; i <= 0x23; i++ )
+    {
+        IS31_write_register( addr, i, 0x00 );
+    }
+
+    // set PWM on all LEDs to 0
+    for ( int i = 0x24; i <= 0xB3; i++ )
+    {
+        IS31_write_register( addr, i, 0x00 );
+    }
+
+    // select "function register" bank
+    IS31_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+
+    // disable software shutdown
+    IS31_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
+
+    // select bank 0 and leave it selected.
+    // most usage after initialization is just writing PWM buffers in bank 0
+    // as there's not much point in double-buffering
+    IS31_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+
+}
+
+void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        // Subtract 0x24 to get the second index of g_pwm_buffer
+        g_pwm_buffer[led.driver][led.r - 0x24] = red;
+        g_pwm_buffer[led.driver][led.g - 0x24] = green;
+        g_pwm_buffer[led.driver][led.b - 0x24] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31_set_color( i, red, green, blue );
+    }
+}
+
+void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+  uint8_t control_register_r = (led.r - 0x24) / 8;
+  uint8_t control_register_g = (led.g - 0x24) / 8;
+  uint8_t control_register_b = (led.b - 0x24) / 8;
+  uint8_t bit_r = (led.r - 0x24) % 8;
+  uint8_t bit_g = (led.g - 0x24) % 8;
+  uint8_t bit_b = (led.b - 0x24) % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        IS31_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        IS31_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        for ( int i=0; i<18; i++ )
+        {
+            IS31_write_register(addr1, i, g_led_control_registers[0][i] );
+            IS31_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}
+

drivers/is31fl3731.h

@@ -23,7 +23,7 @@
 #include <stdbool.h>
 
 typedef struct is31_led {
-	uint8_t driver:2;
+  uint8_t driver:2;
   uint8_t r;
   uint8_t g;
   uint8_t b;
@@ -31,21 +31,21 @@ typedef struct is31_led {
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3731_init( uint8_t addr );
-void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31_init( uint8_t addr );
+void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
 
-void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
 
-void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+void IS31_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 
 #define C1_1  0x24
 #define C1_2  0x25

keyboards/1up60hse/1up60hse.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "1up60hse.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/1up60hse/1up60hse.h

@@ -0,0 +1,39 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments representing the physical
+// layout of the board and position of the keys
+// The second converts the arguments into a two-dimensional array which 
+// represents the switch matrix. 
+#define LAYOUT_60_ansi( \
+	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,           K3D, \
+	K40, K41, K42,             K45,              K49, K4A, K4B,      K4D  \
+) { \
+	{ K00,  K01,  K02,  K03,   K04,   K05, K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D }, \
+	{ K10,  K11,  K12,  K13,   K14,   K15, K16,   K17,   K18,   K19, K1A, K1B,   K1C,   K1D }, \
+	{ K20,  K21,  K22,  K23,   K24,   K25, K26,   K27,   K28,   K29, K2A, K2B,   KC_NO, K2D }, \
+	{ K30,  K31,  K32,  K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, KC_NO, KC_NO, K3D }, \
+	{ K40,  K41,  K42,  KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B,   KC_NO, K4D }  \
+}
+#endif

keyboards/1up60hse/config.h

@@ -0,0 +1,224 @@
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    1upkeyboards
+#define PRODUCT         1up60hse
+#define DESCRIPTION     A custom 60% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
+#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, E6, D1, D0, D2, D3, D5, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/1up60hse/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "1up60hse",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/1up60hse/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/1up60hse/keymaps/default/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_60_ansi(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(2), KC_RGUI, KC_RCTL),
+
+	[1] = LAYOUT_60_ansi(
+		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+  [2] = LAYOUT_60_ansi(
+		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_STEP, BL_DEC, BL_INC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, RGB_SAI, RGB_HUD, RGB_HUI, RGB_MOD, RGB_TOG, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+

keyboards/1up60hse/keymaps/default/readme.md

@@ -0,0 +1,6 @@
+# 1up60hse default keymap
+
+This is the default keymap provided by [1upkeyboards](https://www.1upkeyboards.com).  
+
+## Notes
+- Software reset key is located on `Esc` on the third layer.

keyboards/1up60hse/readme.md

@@ -0,0 +1,15 @@
+# 1up60hse (hot swap edition)
+
+![1up60hse](https://i2.wp.com/www.1upkeyboards.com/wp-content/uploads/2018/08/PCB-1up-60-hotswap-group-RGB.jpg?fit=1280%2C1280&ssl=1)
+
+A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a standard ANSI layout.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: 1up60hse 60% PCB.  
+Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-pcb-hse/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 1up60hse:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/1up60hse/rules.mk

@@ -0,0 +1,72 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = 60_ansi

keyboards/5x5/5x5.c

@@ -0,0 +1,29 @@
+
+#include "5x5.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/5x5/5x5.h

@@ -0,0 +1,57 @@
+
+#ifndef FIVEX5_H
+#define FIVEX5_H
+
+#include "quantum.h"
+#define ___ KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_ortho_5x5( \
+    K00, K01, K02, K03, K04, \
+    K10, K11, K12, K13, K14, \
+    K20, K21, K22, K23, K24, \
+    K30, K31, K32, K33, K34, \
+    K40, K41, K42, K43, K44 \
+) \
+{ \
+    { K00, K01, K02, K03, K04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, K14, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, K24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, K34, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K40, K41, K42, K43, K44, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___} \
+}
+
+#define LAYOUT_ortho_5x10( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49 \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, ___, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, ___, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, ___, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, ___, ___, ___, ___, ___}, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, ___, ___, ___, ___, ___} \
+}
+
+#define LAYOUT_ortho_5x15( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e}, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e}, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b, K3c, K3d, K3e}, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e} \
+}
+
+#endif

keyboards/5x5/config.h

@@ -0,0 +1,208 @@
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x05B5
+#define MANUFACTURER    di0ib
+#define PRODUCT         The 5x5 Keyboard
+#define DESCRIPTION     A 25 or 50 or 75 key keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B2, D1, D0, D4, C6 }
+#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/

keyboards/5x5/keymaps/default/config.h

@@ -0,0 +1,5 @@
+
+
+#pragma once
+
+// place overrides here

keyboards/5x5/keymaps/default/keymap.c

@@ -0,0 +1,139 @@
+
+#include QMK_KEYBOARD_H
+
+#define PAD 0
+#define _QW 1
+#define NUM 2
+#define DIR 3
+
+// Readability keycodes
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Single 5x5 board only
+ * .--------------------------------------------.
+ * | QWERTY |   /    |   *    |   -    |        |
+ * |--------+--------+--------+--------+--------|
+ * |   7    |   8    |   9    |   +    |        |
+ * |--------+--------+--------+--------+--------|
+ * |   4    |   5    |   6    |   +    |        |
+ * |--------+--------+--------+--------+--------|
+ * |   1    |   2    |   3    | ENTER  |        |
+ * |--------+--------+--------+--------+--------|
+ * |   0    |   0    |   .    | ENTER  |        |
+ * '--------------------------------------------'
+ */
+
+  [PAD] = LAYOUT_ortho_5x5(
+  DF(_QW), KC_PSLS, KC_PAST,   KC_PMNS, _______,
+  KC_KP_7, KC_KP_8, KC_KP_9,   KC_PPLS, _______,
+  KC_KP_4, KC_KP_5, KC_KP_6,   KC_PPLS, _______,
+  KC_KP_1, KC_KP_2, KC_KP_3,   KC_PENT, _______,
+  KC_KP_0, KC_KP_0, KC_KP_DOT, KC_PENT, _______
+  ),
+
+/* QWERTY
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | ESC    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | BACKSP |   7    |   8    |   9    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | TAB    | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      |   4    |   5    |   6    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | SHIFT  | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | ENT/SFT|   1    |   2    |   3    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | LCTRL  | LGUI   | ALT    | ALT    | NUM    | SHIFT  | SPACE  | DIR    | RGUI   | RALT   | DEL    | CTRL   |   0    |   0    |   .    |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_QW] = LAYOUT_ortho_5x15(
+  _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, _______, _______, _______,
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, KC_KP_7, KC_KP_8, KC_KP_9,
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_KP_4, KC_KP_5, KC_KP_6,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_T(KC_ENT), KC_KP_1, KC_KP_2, KC_KP_3,
+  KC_LCTL, KC_LGUI, KC_LALT, KC_LALT, MO(NUM), KC_LSFT, KC_SPC,  MO(DIR), KC_RGUI, KC_RALT, KC_DEL,  KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT
+  ),
+
+/* NUMBERS
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | NUMLOCK|   /    |   *    |   -    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |    `   | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |        |        |        |   +    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F11    | F12    |        |        |        | ENTER  | SHIFT  | RGUI   | ./ALT  | BKSC   |        |        |        | ENTER  |
+ * |        |        |        |        |        |        |        |        |        |        |CTRLhold|		     |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        | ENTER  | SHIFT  |        |        |        |        |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [NUM] = LAYOUT_ortho_5x15(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS,
+  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT,
+  _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______
+  ),
+
+/* DIRECTIONS
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | RESET  | TAB    |   up   |        | INS    | CTRL   | SHIFT  | PgUp   | Home   |   -    |   =    |  DEL   |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | CAPSLK | left   |  down  | right  | PrScr  | SHIFT  | CTRL   | PgDn   | End    |   [    |   ]    |   \    |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | P-Brk  |        |        |        |        |        |        | RGUI   | ALT    |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | KEYPAD |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [DIR] = LAYOUT_ortho_5x15(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  RESET,   KC_TAB,  KC_UP,   _______, KC_INS,  KC_LCTL, KC_LSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,  KC_DEL,  _______, _______, _______,
+  KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_LCTL, KC_PGDN, KC_END,  KC_LBRC, KC_RBRC, KC_BSLS, _______, _______, _______,
+  _______, KC_PAUS, _______, _______, _______, _______, _______, _______, KC_RGUI, KC_RALT, _______, _______, _______, _______, _______,
+  DF(PAD), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/5x5/readme.md

@@ -0,0 +1,23 @@
+# 5x5
+
+![5x5](https://3.bp.blogspot.com/-bKOfUyMtdrE/WqGA_03kGZI/AAAAAAACPtY/DsHDTQS0IlMD3ie8HHlf1ATRUAwpZdcSgCLcBGAs/s1600/c.jpg)  
+===  
+
+**Modular Keypad/Keyboard**  
+The basic unit is a 5x5 matrix with 25 keys. Up to 3 of these can be connected to each other side by side.  
+5x5, 5x10, and 5x15 matrices are possible.  
+There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers.  
+**_All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro)._**  
+
+* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/5x5)
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: 5x5 PCB   
+Hardware Availability: [5x5 project on 40% Keyboards](http://www.40percent.club/2018/04/5x5.html)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 5x5:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.    
+First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.  

keyboards/5x5/rules.mk

@@ -0,0 +1,74 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUT = ortho_5x5  ortho_5x10  ortho_5x15

keyboards/al1/info.json

@@ -5,12 +5,11 @@
   "width": 20.5,
   "height": 5.25,
   "layouts": {
-      "LAYOUT": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"\u2191", "x":15.25, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}, {"label":"\u2190", "x":14.25, "y":4.25}, {"label":"\u2193", "x":15.25, "y":4.25}, {"label":"\u2192", "x":16.25, "y":4.25}]
-      },
-
-      "LAYOUT_split_bs": {
-        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"\u2191", "x":15.25, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}, {"label":"\u2190", "x":14.25, "y":4.25}, {"label":"\u2193", "x":15.25, "y":4.25}, {"label":"\u2192", "x":16.25, "y":4.25}]
-      }
+    "LAYOUT": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"↑", "x":15.25, "y":3.25}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"←", "x":14.25, "y":4.25}, {"label":"↓", "x":15.25, "y":4.25}, {"label":"→", "x":16.25, "y":4.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}]
+    },
+    "LAYOUT_split_bs": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"↑", "x":15.25, "y":3.25}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"←", "x":14.25, "y":4.25}, {"label":"↓", "x":15.25, "y":4.25}, {"label":"→", "x":16.25, "y":4.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}]
+    }
   }
 }

keyboards/al1/keymaps/default/keymap.c

@@ -20,22 +20,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_ESC,  KC_1,    KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  KC_INS,   KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,\
        KC_TAB,  KC_Q,    KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
        KC_CAPS, KC_A,    KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENT,                 KC_P4,    KC_P5,    KC_P6,          \
-       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_FN0,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
-       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_FN0,  KC_RGUI,  KC_RCTRL,                                         KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_P0,    KC_PDOT         ),
+       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  MO(1),          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
+       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   MO(1),  KC_RGUI,  KC_RCTRL,                                         KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_P0,    KC_PDOT         ),
 
        [1] = LAYOUT(\
        KC_ESC,  KC_F1,    KC_F2,     KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,    KC_F8,     KC_F9,     KC_F10,     KC_F11,  KC_F12,    KC_BSPC,  KC_INS,   KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,\
-       KC_TAB,  KC_Q,    KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
+       KC_TAB,  KC_Q,    KC_W,     KC_E,    RESET,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
        KC_CAPS, KC_A,    KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENT,                 KC_P4,    KC_P5,    KC_P6,          \
-       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_FN0,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
-       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_FN0,  KC_RGUI,  KC_RCTRL,                                         KC_FN1,  KC_FN2,  KC_FN3, KC_P0,    KC_PDOT         ),
+       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_TRNS,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
+       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_TRNS,  KC_RGUI,  KC_RCTRL,                                         BL_TOGG,  BL_DEC,  BL_INC, KC_P0,    KC_PDOT         ),
 };
 
 
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
   // MACRODOWN only works in this function

keyboards/al1/keymaps/splitbs/keymap.c

@@ -5,14 +5,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_ESC,  KC_1,    KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_GRAVE, KC_BSPC,  KC_INS,   KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS, \
        KC_TAB,  KC_Q,    KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
        KC_CAPS, KC_A,    KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENT,                 KC_P4,    KC_P5,    KC_P6,          \
-       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_FN0,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
-       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_FN0,  KC_RGUI,  KC_RCTRL,                                         KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_P0,    KC_PDOT         ),
+       KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  MO(1),          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
+       KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   MO(1),  KC_RGUI,  KC_RCTRL,                                         KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_P0,    KC_PDOT         ),
         [1] = LAYOUT_split_bs(\
         KC_ESC,  KC_F1,    KC_F2,     KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,    KC_F8,     KC_F9,     KC_F10,     KC_F11,  KC_F12,   KC_GRAVE, KC_DELETE,  KC_INS,   KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS, \
-        KC_TAB,  KC_Q,    KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
+        KC_TAB,  KC_Q,    KC_W,     KC_E,     RESET,     KC_T,     KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, KC_DELETE, KC_P7,    KC_P8,    KC_P9,    KC_PPLS,\
         KC_CAPS, KC_A,    KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENT,                 KC_P4,    KC_P5,    KC_P6,          \
-        KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_FN0,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
-        KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_FN0,  KC_RGUI,  KC_RCTRL,                                         KC_FN1,  KC_FN2,  KC_FN3, KC_P0,    KC_PDOT         ),
+        KC_LSFT, KC_Z,    KC_X,     KC_C,    KC_V,     KC_B,     KC_N,     KC_M,    KC_COMMA, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_TRNS,          KC_UP,    KC_P1,    KC_P2,    KC_P3,    KC_PENT, \
+        KC_LCTL, KC_LGUI,  KC_LALT, KC_SPACE,   KC_TRNS,  KC_RGUI,  KC_RCTRL,                                         BL_TOGG,  BL_DEC,  BL_INC, KC_P0,    KC_PDOT         ),
 };
 
 const uint16_t PROGMEM fn_actions[] = {

keyboards/al1/rules.mk

@@ -60,7 +60,8 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/alf_x2/alf_x2.h

@@ -91,7 +91,7 @@
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 },  \
 	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 },  \
 	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_N), K313,  K314 },  \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 },  \
 	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }   \
 }
 

keyboards/amj60/amj60.h

@@ -3,7 +3,7 @@
 
 #include "quantum.h"
 
-// readability  
+// readability
 #define XXX KC_NO
 
 /* AMJ60 layout to the best of my knowledge matrix layout
@@ -34,7 +34,7 @@
     {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
 }
 
-/* 
+/*
    * ANSI
    * ,-----------------------------------------------------------.
    * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c|   0d  |
@@ -92,7 +92,7 @@
     {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
 }
 
-/* ISO 
+/* ISO
    * ,-----------------------------------------------------------.
    * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
    * |-----------------------------------------------------------|
@@ -116,7 +116,7 @@
     {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
     {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
     {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
-    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
     {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
 }
 

keyboards/amj96/amj96.h

@@ -18,25 +18,28 @@
 
 #include "quantum.h"
 
+// readability
+#define XXX KC_NO
+
 // This a shortcut to help you visually see your layout.
 // The following is an example using the Planck MIT layout
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
 #define LAYOUT( \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,   K1F, K09, K0A, K0C, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,   K2F, K0B, K0F, K6F,\
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,   K3F, K0D,      K6D,\
-    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E,   K4F,           K6E,\
-    K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E,   K5F, K0E, K07,\
-    K60, K61, K62, K63, K64, K65, K66,      K68, K69, K6A, K6B, K6C\
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,   K2F, K0B, K0F, K6F, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,        K3E, K3F, K0D, K6D, \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C,             K4D, K4E, K4F, K6E, \
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D,        K5E, K5F, K0E, K07, \
+    K60, K61, K62,                K63,                     K64, K65, K66, K68,   K69, K6A, K6B, K6C  \
 ) { \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K07, KC_NO,    KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F}, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F}, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F}, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F}, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F}, \
-    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F}, \
-    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO,    KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F} \
+    { XXX, XXX, XXX, XXX, XXX, XXX, XXX, K07, XXX, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, \
+    { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, \
+    { K60, K61, K62, K63, K64, K65, K66, XXX, K68, K69, K6A, K6B, K6C, K6D, K6E, K6F }  \
 }
 
 

keyboards/amj96/config.h

@@ -170,8 +170,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
 
 /*
  * MIDI options

keyboards/amj96/info.json

@@ -5,8 +5,9 @@
   "width": 19,
   "height": 6,
   "layouts": {
-      "LAYOUT": {
-          "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Scroll Lock", "x":14, "y":0}, {"label":"Pause", "x":15, "y":0}, {"label":"Num Lock", "x":16, "y":0}, {"label":"/", "x":17, "y":0}, {"label":"*", "x":18, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Insert", "x":15, "y":1}, {"label":"Home", "x":16, "y":1}, {"label":"PgUp", "x":17, "y":1}, {"label":"-", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Delete", "x":15, "y":2}, {"label":"End", "x":16, "y":2}, {"label":"PgDn", "x":17, "y":2}, {"label":"7", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"8", "x":18, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"1", "x":14, "y":4}, {"label":"\u2191", "x":15, "y":4}, {"label":"\u2190", "x":16, "y":4}, {"label":"\u2193", "x":17, "y":4}, {"label":"\u2192", "x":18, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.25}, {"label":"Win", "x":11.25, "y":5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5, "w":1.25}, {"label":"2", "x":15, "y":5}, {"label":".", "x":16, "y":5}, {"label":"3", "x":17, "y":5}, {"label":"9", "x":18, "y":5}]
-      }
+    "LAYOUT": {
+      "key_count": 103,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"Print Screen", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Ins", "x":15, "y":0}, {"label":"Del", "x":16, "y":0}, {"label":"Page Up", "x":17, "y":0}, {"label":"Page Down", "x":18, "y":0}, {"label":"` ~", "x":0, "y":1}, {"label":"1 !", "x":1, "y":1}, {"label":"2 @", "x":2, "y":1}, {"label":"3 #", "x":3, "y":1}, {"label":"4 $", "x":4, "y":1}, {"label":"5 %", "x":5, "y":1}, {"label":"6 ^", "x":6, "y":1}, {"label":"7 &", "x":7, "y":1}, {"label":"8 *", "x":8, "y":1}, {"label":"9 (", "x":9, "y":1}, {"label":"0 )", "x":10, "y":1}, {"label":"- _", "x":11, "y":1}, {"label":"= +", "x":12, "y":1}, {"label":"Back Space", "x":13, "y":1}, {"label":"Back Space 2", "x":14, "y":1}, {"label":"Num Lock", "x":15, "y":1}, {"label":"/", "x":16, "y":1}, {"label":"*", "x":17, "y":1}, {"label":"-", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"[ {", "x":11.5, "y":2}, {"label":"] }", "x":12.5, "y":2}, {"label":"\\ |", "x":13.5, "y":2, "w":1.5}, {"label":"7", "x":15, "y":2}, {"label":"8", "x":16, "y":2}, {"label":"9", "x":17, "y":2}, {"label":"+", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":"; :", "x":10.75, "y":3}, {"label":"' \"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"+", "x":18, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"label":"ISO \\", "x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":", <", "x":9.25, "y":4}, {"label":". >", "x":10.25, "y":4}, {"label":"/ ?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"Up", "x":14, "y":4}, {"label":"1", "x":15, "y":4}, {"label":"2", "x":16, "y":4}, {"label":"3", "x":17, "y":4}, {"label":"Enter", "x":18, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"GUI", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"label":"Space", "x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Fn", "x":11.5, "y":5, "w":1.5}, {"label":"Left", "x":13, "y":5}, {"label":"Down", "x":14, "y":5}, {"label":"Right", "x":15, "y":5}, {"label":"0", "x":16, "y":5}, {"label":".", "x":17, "y":5}, {"label":"Enter", "x":18, "y":5}]
+    }
   }
 }

keyboards/amj96/keymaps/default/keymap.c

@@ -13,25 +13,27 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "amj96.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-     LAYOUT(
-        ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, PSCR,PAUS,  INS, DEL, PGUP,PGDN, \
-        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,NO,    NLCK,PSLS,PAST,PMNS, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,  P7,  P8,  P9,  PPLS, \
-        CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,          ENT,   P4,  P5,  P6,  PPLS, \
-        LSFT,NO, Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,      RSFT,UP,    P1,  P2,  P3,  PENT,\
-        LCTL,LGUI,LALT,               SPC,                RALT,FN0,      LEFT,DOWN,  RGHT,P0, PDOT, PENT),
+  [0] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_PAUS, KC_INS,  KC_DEL,  KC_PGUP, KC_PGDN, \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_NO,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,            KC_P1,   KC_P2,   KC_P3,   KC_PENT, \
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_FN0,  KC_LEFT, KC_DOWN, KC_RGHT,          KC_P0,   KC_PDOT, KC_PENT  \
+  ),
 
-     LAYOUT(
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,\
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO,    TRNS,TRNS,TRNS,TRNS,\
-        TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,     TRNS,  TRNS,TRNS,TRNS,TRNS,\
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,          TRNS,  TRNS,TRNS,TRNS,TRNS,\
-        TRNS,NO,  TRNS,TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,     TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,\
-        TRNS,TRNS,TRNS,               TRNS,               TRNS,TRNS,     TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS)
+  [1] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, \
+    _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
+    _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______,          _______, _______, _______  \
+  )
 };
 
 const uint16_t PROGMEM fn_actions[] = {

keyboards/amj96/readme.md

@@ -3,7 +3,7 @@
 The AMD96 is a 96 key custom keyboard with anodized aluminum case, twin usb ports, and support for backlight LEDs and RGB underglow via SMD LEDs.
 
 Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
-Hardware Supported: AMJ96 
+Hardware Supported: AMJ96  
 Hardware Availability: Was previously available on a GB via [Flashquark](https://flashquark.com/product/amj96/)
 
 Make example for this keyboard (after setting up your build environment):

keyboards/amj96/rules.mk

@@ -55,12 +55,12 @@ BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE ?= yes          # USB Nkey Rollover
-# BACKLIGHT_ENABLE ?= yes     # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode

keyboards/amjpad/info.json

@@ -5,11 +5,11 @@
   "width": 4,
   "height": 6,
   "layouts": {
-    "LAYOUT": {
+    "LAYOUT_numpad_6x4": {
       "key_count": 21,
-      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "h":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4, "h":2}, {"x":0, "y":5, "w":2}, {"x":2, "y":5}]
+      "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k50", "x":0, "y":5, "w":2}, {"label":"k52", "x":2, "y":5}, {"label":"k43", "x":3, "y":4, "h":2}]
     },
-    "LAYOUT_all": {
+    "LAYOUT_ortho_6x4": {
       "key_count": 24,
       "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k33", "x":3, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4}, {"label":"k50", "x":0, "y":5}, {"label":"k51", "x":1, "y":5}, {"label":"k52", "x":2, "y":5}, {"label":"k53", "x":3, "y":5}]
     }

keyboards/atreus/keymaps/replicaJunction/config.h

@@ -1,94 +1,11 @@
-/*
-Config file - Atreus QMK with replicaJunction layout
+#pragma once
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
+// Layer definitions
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Technomancy
-#define PRODUCT         Atreus
-#define DESCRIPTION     q.m.k. keyboard firmware for Atreus
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 11
-
-// Change this to how you wired your keyboard
-// COLS: Left to right, ROWS: Top to bottom
-#if defined(ATREUS_ASTAR)
-#   define MATRIX_ROW_PINS { D0, D1, D3, D2 }
-#   define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 }
-#   define UNUSED_PINS
-#elif defined(ATREUS_TEENSY2)
-#   define MATRIX_ROW_PINS { D0, D1, D2, D3 }
-#   define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 }
-#   define UNUSED_PINS
-#endif
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-//#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-// Default: 5
-#define DEBOUNCING_DELAY 6
-
-// I don't have any locking keys, so I don't need these features
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Prevent modifiers from sticking when switching layers */
-#define PREVENT_STUCK_MODIFIERS
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+#define L_COLEMAK 0
+#define L_NUM     1
+#define L_EXTEND  2
+#define L_FUNC    3
+#define L_LL_R    4
+#define L_LL_E    5
+#define L_LL_I    6

keyboards/atreus/keymaps/replicaJunction/keymap.c

@@ -1,212 +1,78 @@
 /*
  * Keyboard: Atreus
  * Keymap:   replicaJunction
- * Version:  0.4
- *
- * This keymap is designed to complement my Ergodox keyboard layout, found in keyboards/ergodox_ez.
- * The Atreus keyboard is a 40% board whose design was heavily influenced by the Ergodox. I now
- * have both keyboards, so I've designed these layouts in an effort to make switching between the
- * two as easy as possible.
- *
- * Clearly, the Atreus is the limiting factor in this equation, so I've taken heavy advantage of
- * function and dual-role keys.
- *
- * The default key layout in this keymap is Colemak-ModDH. Information on that layout can be found
- * here: https://colemakmods.github.io/mod-dh/
+ * Version:  2.1
  */
 
 #include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-// Note that whatever is set as layer 0 will be the default layer of the keyboard.
-
-#define _CO 0 // Colemak
-#define _QW 1 // QWERTY
-#define _GA 2 // Gaming
-#define _EX 3 // Extend
-#define _NU 4 // Numpad
-#define _FN 5 // Function
-
-// Some quick aliases, just to make it look pretty
-#define _______ KC_TRNS
-#define KCX_CA  LCTL(KC_LALT)
-#define KCX_CS  LCTL(KC_LSFT)
-#define KCX_CSA LCTL(LSFT(KC_LALT))
-#define KCX_LST LSFT(KC_TAB)
-#define KX_COPY LCTL(KC_C)
-#define KX_CUT  LCTL(KC_X)
-#define KX_PAST LCTL(KC_V)
-#define KX_UNDO LCTL(KC_Z)
-
-#define _USER 0 // User macro
-
-; // This doesn't do anything. It's just for VSCode because its syntax highlighting is weird for the above #define statements.
+#include "replicaJunction.h"
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /*
-   * Colemak-ModDH
-   *
-   * ,----------------------------------.                     ,----------------------------------.
-   * |   Q  |   W  |   F  |   P  |   B  |                     |   J  |   L  |   U  |   Y  |   ;  |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |   A  |   R  |   S  |   T  |   G  |                     |   M  |   N  |   E  |   I  |   O  |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |Z Shft|   X  |   C  |   D  |   V  | ,------.   ,------. |   K  |   H  |   ,  |   .  |/ Shft|
-   * +------+------+------+------+------| | Ctrl |   |  Alt | +------+------+------+------+------|
-   * |  Esc |  Gui |  Tab |  _FN | Bksp | |  Del |   | Enter| |Sp/_NU|  _EX |   -  |   '  |   =  |
-   * `----------------------------------' `------'   `------' `----------------------------------'
-   *
-   */
-  [_CO] = LAYOUT(
-    KC_Q,        KC_W,    KC_F,    KC_P,    KC_B,                                   KC_J,            KC_L,    KC_U,    KC_Y,    KC_SCLN,
-    KC_A,        KC_R,    KC_S,    KC_T,    KC_G,                                   KC_M,            KC_N,    KC_E,    KC_I,    KC_O,
-    SFT_T(KC_Z), KC_X,    KC_C,    KC_D,    KC_V,                                   KC_K,            KC_H,    KC_COMM, KC_DOT,  SFT_T(KC_SLSH),
-    KC_ESC,      KC_LGUI, KC_TAB,  MO(_FN), KC_BSPC, CTL_T(KC_DEL), ALT_T(KC_ENT),  LT(_NU, KC_SPC), MO(_EX), KC_MINS, KC_QUOT, KC_EQL
-  ),
 
-  /*
-   * QWERTY
-   *
-   * ,----------------------------------.                     ,----------------------------------.
-   * |   Q  |   W  |   E  |   R  |   T  |                     |   Y  |   U  |   I  |   O  |   P  |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |   A  |   S  |   D  |   F  |   G  |                     |   H  |   J  |   K  |   L  |   ;  |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |Z Shft|   X  |   C  |   V  |   B  | ,------.   ,------. |   N  |   M  |   ,  |   .  |/ Shft|
-   * +------+------+------+------+------| | Ctrl |   |  Alt | +------+------+------+------+------|
-   * |  Esc |  Gui |  Tab |  _FN | Bksp | |  Del |   | Enter| |Sp/_NU|  _EX |   -  |   '  |   =  |
-   * `----------------------------------' `------'   `------' `----------------------------------'
-   *
-   */
-  [_QW] = LAYOUT( /* Qwerty */
-    KC_Q,        KC_W,    KC_E,    KC_R,    KC_T,                                  KC_Y,            KC_U,    KC_I,    KC_O,    KC_P,
-    KC_A,        KC_S,    KC_D,    KC_F,    KC_G,                                  KC_H,            KC_J,    KC_K,    KC_L,    KC_SCLN,
-    SFT_T(KC_Z), KC_X,    KC_C,    KC_V,    KC_B,                                  KC_N,            KC_M,    KC_COMM, KC_DOT,  SFT_T(KC_SLSH),
-    KC_ESC,      KC_LGUI, KC_TAB,  MO(_FN), KC_BSPC, CTL_T(KC_DEL), ALT_T(KC_ENT), LT(_NU, KC_SPC), MO(_EX), KC_MINS, KC_QUOT, KC_EQL
-  ),
+[L_COLEMAK] = LAYOUT(
+  KC_Q,    KC_W,    KC_F,    KC_P,    KC_B,                      KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN,
+  KC_A,    KC_R_LT, KC_S_LT, KC_T,    KC_G,                      KC_M,    KC_N,    KC_E_LT, KC_I_LT, KC_O,
+  KX_Z_MT, KX_X_MT, KX_C_MT, KX_D_MT, KC_V,                      KC_K,    KX_H_MT, KX_COMT, KX_DOMT, KX_SLMT,
+  TD_LAYR, KC_LGUI, KC_TAB,  KC_LSFT, KX_BKNM, KX_DCTL, KX_NALT, KX_SPAC, KC_RSFT, KC_MINS, KC_QUOT, KC_EQL
+)
+,
 
-  /*
-   * Extend
-   *
-   * Ctrl+` is a keyboard shortcut for the program ConEmu, which brings up a dropdown console window.
-   *
-   * Also note that some dual-role keys are overridden here with their modifiers
-   *
-   * ,----------------------------------.                     ,----------------------------------.
-   * |      |      |      |      |Ctrl `|                     | PgUp | Home |   Up |  End |  Del |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |  Gui | Shift|  Alt | Ctrl |      |                     | PgDn | Left | Down | Right| Bksp |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * | Shift|  Cut | Copy |      | Paste| ,------.   ,------. |      | ^Tab |  Tab |      |Insert|
-   * +------+------+------+------+------| |  Del |   | Enter| +------+------+------+------+------|
-   * |      |      |      |      |      | |      |   |      | | Space|XXXXXX|      |      |PrntSc|
-   * `----------------------------------' `------'   `------' `----------------------------------'
-   *
-   */
-  [_EX] = LAYOUT( /* Extend */
-    _______, _______, _______, _______, LCTL(KC_GRV),              KC_PGUP, KC_HOME, KC_UP,   KC_END,  KC_DEL,
-    KC_LGUI, KC_LSFT, KC_LALT, KC_LCTL, _______,                   KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC,
-    KC_LSFT, KX_CUT,  KX_COPY, _______, KX_PAST,                   _______, KCX_LST, KC_TAB,  _______, KC_INS,
-    _______, _______, _______, _______, _______, KC_DEL,  KC_ENT,  KC_SPC,  _______, _______, _______, KC_PSCR
-  ),
+[L_NUM] = LAYOUT(
+  KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_SLSH,                   KC_COLN, KC_7,    KC_8,    KC_9,    KC_SLSH,
+  KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_PIPE,                   KC_HASH, KC_4,    KC_5,    KC_6,    KC_ASTR,
+  KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_BSLS,                   KC_BSPC, KC_1,    KC_2,    KC_3,    KC_MINS,
+  _______, KC_AMPR, KC_TILD, KC_GRV,  ooooooo, _______, KC_ENT,  MO_FUNC, KC_0,    KC_DOT,  KC_EQL,  KC_PLUS
+)
+,
 
-  /*
-   * Numbers and symbols
-   *
-   * ,----------------------------------.                     ,----------------------------------.
-   * |   !  |   @  |   {  |   }  |   &  |                     |   /  |   7  |   8  |   9  |   *  |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |   #  |   $  |   (  |   )  |   ~  |                     |   |  |   4  |   5  |   6  |   -  |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |   %  |   ^  |   [  |   ]  |   `  | ,------.   ,------. |   \  |   1  |   2  |   3  |   +  |
-   * +------+------+------+------+------| |      |   |      | +------+------+------+------+------|
-   * |      |  _GA |      |      |      | |      |   |      | |XXXXXX|   0  |   .  |   =  |      |
-   * `----------------------------------' `------'   `------' `----------------------------------'
-   *
-   */
-  [_NU] = LAYOUT( /* Numbers and symbols */
-    KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_AMPR,                    KC_SLSH, KC_7,    KC_8,   KC_9,   KC_ASTR,
-    KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_TILD,                    KC_PIPE, KC_4,    KC_5,   KC_6,   KC_MINS,
-    KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_GRV,                     KC_BSLS, KC_1,    KC_2,   KC_3,   KC_PLUS,
-    _______, TG(_GA), _______, _______, _______, _______,  _______, _______, KC_0,    KC_DOT, KC_EQL, _______
-  ),
+[L_EXTEND] = LAYOUT(
+  _______, _______, _______, KC_APP,  KX_CGR,                     KC_PGUP, KC_HOME, KC_UP,   KC_END,  KC_DEL,
+  KC_LGUI, KC_LSFT, KC_LALT, KC_LCTL, _______,                    KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC,
+  _______, _______, _______, KX_SRCH, KX_PAST,                    _______, KX_STAB, KC_TAB,  _______, KC_INS,
+  _______, _______, _______, _______, MO_FUNC,  KC_DEL,  KC_ENT,  _______, _______, _______, _______, KC_PSCR
+)
+,
 
-  /*
-   * Functions
-   *
-   * ,----------------------------------.                     ,----------------------------------.
-   * | Caps |  F9  |  F10 |  F11 |  F12 |                     | _USER|Whl Up|  MUp |Whl Dn|      |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |      |  F5  |  F6  |  F7  |  F8  |                     | Vol ^| MLeft| MDown|MRight|      |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |      |  F1  |  F2  |  F3  |  F4  | ,------.   ,------. | Vol v|      |      |      |      |
-   * +------+------+------+------+------| |      |   |RClick| +------+------+------+------+------|
-   * |      |      |      |XXXXXX|      | |      |   |      | |LClick|MClick| _CO  |  _GA | RESET|
-   * `----------------------------------' `------'   `------' `----------------------------------'
-   *
-   */
-  [_FN] = LAYOUT( /* Functions */
-    KC_CAPS, KC_F9,   KC_F10,  KC_F11,  KC_F12,                    M(_USER),KC_WH_U, KC_MS_U, KC_WH_D, _______,
-    _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,                     KC_VOLU, KC_MS_L, KC_MS_D, KC_MS_R, _______,
-    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,                     KC_VOLD, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, KC_BTN2, KC_BTN1, KC_BTN3, DF(_CO), DF(_QW), RESET
-  ),
+[L_FUNC] = LAYOUT(
+  _______, _______, M_LCLIK, M_RCLIK, M_MCLIK,                   KC_VOLU, KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  KC_LGUI, KC_LSFT, KC_LALT, KC_LCTL, M_WHLUP,                   KC_MUTE, KC_F5,   KC_F6,   KC_F7,   KC_F8,
+  M_LEFT,  M_DOWN,  M_UP,    M_RIGHT, M_WHLDN,                   KC_VOLD, KC_F1,   KC_F2,   KC_F3,   KC_F4,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+,
 
-  /*
-   * Gaming
-   *
-   * ,----------------------------------.                     ,----------------------------------.
-   * |      |      |      |      |      |                     |      |Whl Up|  MUp |Whl Dn|      |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |      |      |      |      |      |                     |      | MLeft| MDown|MRight|      |
-   * +------+------+------+------+------|                     +------+------+------+------+------|
-   * |  Z   |      |      |      |      | ,------.   ,------. |      |      |      |      |      |
-   * +------+------+------+------+------| | Bksp |   |RClick| +------+------+------+------+------|
-   * |      |  _GA |      | Shift| Space| |      |   |      | |LClick|MClick|      |      |      |
-   * `----------------------------------' `------'   `------' `----------------------------------'
-   *
-   */
-  [_GA] = LAYOUT( /* Gaming */
-    _______, _______, _______, _______, _______,                   _______, KC_WH_U, KC_MS_U, KC_WH_D, _______,
-    _______, _______, _______, _______, _______,                   _______, KC_MS_L, KC_MS_D, KC_MS_R, _______,
-    KC_Z,    _______, _______, _______, _______,                   _______, _______, KC_MS_D, _______, _______,
-    _______, TG(_GA), _______, KC_LSFT, KC_SPC,  KC_BSPC, KC_BTN2, KC_BTN1, KC_BTN3, _______, _______, _______
-  )
-};
+[L_LL_R] = LAYOUT(
+  _______, _______, _______, _______, _______,                   KC_COLN, KC_P7,   KC_P8,   KC_P9,   KC_PSLS,
+  _______, ooooooo, KC_AMPR, KC_PIPE, _______,                   KC_HASH, KC_P4,   KC_P5,   KC_P6,   KC_PAST,
+  _______, _______, _______, _______, _______,                   KC_BSPC, KC_P1,   KC_P2,   KC_P3,   KC_PMNS,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_DOT,  KC_EQL,  KC_PLUS
+)
+,
 
-/*
- * Template
- *
- * ,----------------------------------.                     ,----------------------------------.
- * |      |      |      |      |      |                     |      |      |      |      |      |
- * +------+------+------+------+------|                     +------+------+------+------+------|
- * |      |      |      |      |      |                     |      |      |      |      |      |
- * +------+------+------+------+------|                     +------+------+------+------+------|
- * |      |      |      |      |      | ,------.   ,------. |      |      |      |      |      |
- * +------+------+------+------+------| |      |   |      | +------+------+------+------+------|
- * |      |      |      |      |      | |      |   |      | |      |      |      |      |      |
- * `----------------------------------' `------'   `------' `----------------------------------'
- *
- */
+[L_LL_E] = LAYOUT(
+  RJ_MAKE, RJ_EQ,   RJ_LEQ,  RJ_GEQ,  RJ_GEQR,                   _______, _______, _______, _______, _______,
+  _______, _______, RJ_SELS, RJ_DUND, _______,                   _______, _______, ooooooo, _______, _______,
+  _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+,
 
-const uint16_t PROGMEM fn_actions[] = {
+[L_LL_I] = LAYOUT(
+  KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_SLSH,                   _______, KC_UNDS, KC_GRV,  _______, _______,
+  KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_PIPE,                   _______, KC_MINS, KC_QUOT, ooooooo,  _______,
+  KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_BSLS,                   _______, KC_TILD, KC_DQT,  _______, _______,
+  _______, KC_AMPR, KC_LABK, KC_RABK, _______, _______, _______, _______, _______, _______, _______, _______
+)
 
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  // MACRODOWN only works in this function
-  switch(id) {
-    case _USER:
-      if (record->event.pressed) {
-        register_code(KC_RSFT);
-      } else {
-        unregister_code(KC_RSFT);
-      }
-    break;
-  }
-  return MACRO_NONE;
-};
+// Uncomment any of these to add keyboard-specific code. Otherwise, they
+// will use user defaults defined in the replicaJunction.h header file.
+
+// bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+//   return true;
+// }
+
+// void matrix_init_keymap(void) {};
+
+// void matrix_scan_keymap(void) {};

keyboards/atreus/keymaps/replicaJunction/kle/base-layer.txt

@@ -0,0 +1,34 @@
+[{r:10,rx:1,y:-0.1,x:2},"F"],
+[{y:-0.65,x:1},"W",{x:1},"P"],
+[{y:-0.75},"Q"],
+[{y:-0.9,x:4},"B"],
+[{y:-0.7,x:2},"S"],
+[{y:-0.65,x:1,c:"#45b866"},"R",{x:1,c:"#cccccc"},"T"],
+[{y:-0.75},"A"],
+[{y:-0.9,x:4},"G"],
+[{y:-0.7,x:2},"C\n\n\n<i class='fa fa-windows'></i>"],
+[{y:-0.65,x:1},"X\n\n\nCtrl",{x:1},"D\n\n\nCtrlAlt"],
+[{y:-0.75},"Z"],
+[{y:-0.9,x:4},"V\n\n\nAlt"],
+[{y:-0.75,x:5,h:1.5},"Del\nCtrl"],
+[{y:-0.95,x:2},"Tab"],
+[{y:-0.65,x:1,a:7,fa:[7]},"<i class='fa fa-windows'></i>",{x:1,a:4,f:3},"Shift"],
+[{y:-0.75,f:3},"Layer tap"],
+[{y:-0.9,x:4,f:3},"<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>"],
+[{r:-10,rx:7,ry:0.965,y:-0.2,x:2,f:3},"U"],
+[{y:-0.65,x:1,f:3},"L",{x:1,f:3},"Y"],
+[{y:-0.75,x:4,f:3},":\n;"],
+[{y:-0.9,f:3},"J"],
+[{y:-0.7,x:2,c:"#ffb07b",f:3},"E"],
+[{y:-0.65,x:1,c:"#cccccc",f:3},"N",{x:1,c:"#5dcde3",f:3},"I"],
+[{y:-0.75,x:4,c:"#cccccc",f:3},"O"],
+[{y:-0.9,f:3},"M"],
+[{y:-0.7,x:2,f:3},"<\n,\n\nCtrlAlt"],
+[{y:-0.65,x:1,f:3},"H\n\n\nAlt",{x:1,f:3},">\n.\n\n<i class='fa fa-windows'></i>"],
+[{y:-0.75,x:4,f:3},"?\n/\n\nCtrl"],
+[{y:-0.9,f:3},"K"],
+[{y:-0.75,x:-1,f:3,h:1.5},"Enter\nAlt"],
+[{y:-0.95,x:2,f:3},"_\n-"],
+[{y:-0.65,x:1,f:3},"Shift",{x:1,f:3},"\"\n'"],
+[{y:-0.75,x:4,f:3},"+\n="],
+[{y:-0.9,c:"#ffe08d",f:3},"Space"]

keyboards/atreus/keymaps/replicaJunction/kle/e-layer.txt

@@ -0,0 +1,34 @@
+[{r:10,rx:1,y:-0.1,x:2},"<="],
+[{y:-0.65,x:1},"==",{x:1},">="],
+[{y:-0.75},"make"],
+[{y:-0.9,x:4},"=>"],
+[{y:-0.7,x:2},"select *"],
+[{y:-0.65,x:1,a:7},"",{x:1,a:4},"$_"],
+[{y:-0.75,a:7},""],
+[{y:-0.9,x:4},""],
+[{y:-0.7,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75},""],
+[{y:-0.9,x:4},""],
+[{y:-0.75,x:5,h:1.5},""],
+[{y:-0.95,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75},""],
+[{y:-0.9,x:4},""],
+[{r:-10,rx:7,ry:0.965,y:-0.2,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75,x:4},""],
+[{y:-0.9},""],
+[{y:-0.7,x:2,c:"#ffb07b"},""],
+[{y:-0.65,x:1,c:"#cccccc"},"",{x:1},""],
+[{y:-0.75,x:4},""],
+[{y:-0.9},""],
+[{y:-0.7,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75,x:4},""],
+[{y:-0.9},""],
+[{y:-0.75,x:-1,h:1.5},""],
+[{y:-0.95,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75,x:4},""],
+[{y:-0.9},""]

keyboards/atreus/keymaps/replicaJunction/kle/fn-layer.txt

@@ -0,0 +1,35 @@
+[{r:10,rx:1,y:-0.1,x:2},"RClick"],
+[{y:-0.65,x:1,a:7},"",{x:1,a:4},"LClick"],
+[{y:-0.75,a:7},""],
+[{y:-0.9,x:4,a:4},"MClick"],
+[{y:-0.7,x:2},"Alt"],
+[{y:-0.65,x:1},"Shift",{x:1},"Ctrl"],
+[{y:-0.75,a:7,fa:[7]},"<i class='fa fa-windows'></i>"],
+[{y:-0.9,x:4,a:4,fa:[5,0,0,0,0,0,0,0,0,0,7]},"<i class='kb kb-Unicode-Scroll-1'></i>\n\n\n\n\n\n\n\n\n\n<i class='kb kb-Arrows-Top-4'></i>"],
+[{y:-0.7,x:2,fa:[0,0,0,0,0,0,0,0,0,0,7]},"<i class='fa fa-mouse-pointer'></i>\n\n\n\n\n\n\n\n\n\n<i class='kb kb-Arrows-Up'></i>"],
+[{y:-0.65,x:1},"<i class='fa fa-mouse-pointer'></i>\n\n\n\n\n\n\n\n\n\n<i class='kb kb-Arrows-Down'></i>",{x:1},"<i class='fa fa-mouse-pointer'></i>\n\n\n\n\n\n\n\n\n\n<i class='kb kb-Arrows-Right'></i>"],
+[{y:-0.75},"<i class='fa fa-mouse-pointer'></i>\n\n\n\n\n\n\n\n\n\n<i class='kb kb-Arrows-Left'></i>"],
+[{y:-0.9,x:4,fa:[5,0,0,0,0,0,0,0,0,0,7]},"<i class='kb kb-Unicode-Scroll-1'></i>\n\n\n\n\n\n\n\n\n\n<i class='kb kb-Arrows-Bottom-4'></i>"],
+[{y:-0.75,x:5,a:7,h:1.5},""],
+[{y:-0.95,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75},""],
+[{y:-0.9,x:4,c:"#ffe08d"},""],
+[{r:-10,rx:7,ry:0.965,y:-0.2,x:2,c:"#cccccc",a:4,f:3},"F10"],
+[{y:-0.65,x:1,f:3},"F9",{x:1,f:3},"F11"],
+[{y:-0.75,x:4,f:3},"F12"],
+[{y:-0.9,a:7},""],
+[{y:-0.7,x:2,a:4,f:3},"F6"],
+[{y:-0.65,x:1,f:3},"F5",{x:1,f:3},"F7"],
+[{y:-0.75,x:4,f:3},"F8"],
+[{y:-0.9,a:7},""],
+[{y:-0.7,x:2,a:4,f:3},"F2"],
+[{y:-0.65,x:1,f:3},"F1",{x:1,f:3},"F3"],
+[{y:-0.75,x:4,f:3},"F4"],
+[{y:-0.9,a:7},""],
+[{y:-0.75,x:-1,h:1.5},""],
+[{y:-0.95,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75,x:4},""],
+[{y:-0.9,c:"#ffe08d"},""]
+

keyboards/atreus/keymaps/replicaJunction/kle/i-layer.txt

@@ -0,0 +1,34 @@
+[{r:10,rx:1,y:-0.1,x:2},"{"],
+[{y:-0.65,x:1},"@",{x:1},"}"],
+[{y:-0.75},"!"],
+[{y:-0.9,x:4},"/"],
+[{y:-0.7,x:2},"("],
+[{y:-0.65,x:1},"$",{x:1},")"],
+[{y:-0.75},"#"],
+[{y:-0.9,x:4},"|"],
+[{y:-0.7,x:2},"["],
+[{y:-0.65,x:1},"^",{x:1},"]"],
+[{y:-0.75},"%"],
+[{y:-0.9,x:4},"\\"],
+[{y:-0.75,x:5,a:7,h:1.5},""],
+[{y:-0.95,x:2,a:4},"<"],
+[{y:-0.65,x:1},"&",{x:1},">"],
+[{y:-0.75,a:7},""],
+[{y:-0.9,x:4},""],
+[{r:-10,rx:7,ry:0.965,y:-0.2,x:2,a:4},"`"],
+[{y:-0.65,x:1},"_",{x:1,a:7},""],
+[{y:-0.75,x:4},""],
+[{y:-0.9},""],
+[{y:-0.7,x:2,a:4},"'"],
+[{y:-0.65,x:1},"-",{x:1,c:"#5dcde3",a:7},""],
+[{y:-0.75,x:4,c:"#cccccc"},""],
+[{y:-0.9},""],
+[{y:-0.7,x:2,a:4},"\""],
+[{y:-0.65,x:1},"~",{x:1,a:7},""],
+[{y:-0.75,x:4},""],
+[{y:-0.9},""],
+[{y:-0.75,x:-1,h:1.5},""],
+[{y:-0.95,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75,x:4},""],
+[{y:-0.9},""]

keyboards/atreus/keymaps/replicaJunction/kle/r-layer.txt

@@ -0,0 +1,34 @@
+[{r:10,rx:1,y:-0.1,x:2,a:7},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75},""],
+[{y:-0.9,x:4},""],
+[{y:-0.7,x:2,a:4},"&"],
+[{y:-0.65,x:1,c:"#45b866",a:7},"",{x:1,c:"#cccccc",a:4},"|"],
+[{y:-0.75,a:7},""],
+[{y:-0.9,x:4},""],
+[{y:-0.7,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75},""],
+[{y:-0.9,x:4},""],
+[{y:-0.75,x:5,h:1.5},""],
+[{y:-0.95,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75},""],
+[{y:-0.9,x:4},""],
+[{r:-10,rx:7,ry:0.965,y:-0.2,x:2,a:4},"8"],
+[{y:-0.65,x:1},"7",{x:1},"9"],
+[{y:-0.75,x:4},"/"],
+[{y:-0.9},":"],
+[{y:-0.7,x:2},"5"],
+[{y:-0.65,x:1},"4",{x:1},"6"],
+[{y:-0.75,x:4},"*"],
+[{y:-0.9},"#"],
+[{y:-0.7,x:2},"2"],
+[{y:-0.65,x:1},"1",{x:1},"3"],
+[{y:-0.75,x:4},"-"],
+[{y:-0.9},"<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>"],
+[{y:-0.75,x:-1,a:7,h:1.5},""],
+[{y:-0.95,x:2,a:4},"."],
+[{y:-0.65,x:1},"0",{x:1},"="],
+[{y:-0.75,x:4},"+"],
+[{y:-0.9},"Space"]

keyboards/atreus/keymaps/replicaJunction/kle/space-layer.txt

@@ -0,0 +1,34 @@
+[{r:10,rx:1,y:-0.1,x:2,a:7},""],
+[{y:-0.65,x:1},"",{x:1,fa:[7]},"<i class='kb kb-Hamburger-Menu'></i>"],
+[{y:-0.75},""],
+[{y:-0.9,x:4},"<i class='fa fa-terminal'></i>"],
+[{y:-0.7,x:2,a:4,f:3},"Alt"],
+[{y:-0.65,x:1,f:3},"Shift",{x:1,f:3},"Ctrl"],
+[{y:-0.75,a:7},"<i class='fa fa-windows'></i>"],
+[{y:-0.9,x:4},""],
+[{y:-0.7,x:2},""],
+[{y:-0.65,x:1},"",{x:1},"<i class='fa fa-search'></i>"],
+[{y:-0.75},""],
+[{y:-0.9,x:4},"<i class='fa fa-clipboard'></i>"],
+[{y:-0.75,x:5,h:1.5},""],
+[{y:-0.95,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75},""],
+[{y:-0.9,x:4},""],
+[{r:-10,rx:7,ry:0.965,y:-0.2,x:2},"<i class='kb kb-Arrows-Up'></i>"],
+[{y:-0.65,x:1,a:4,f:3},"Home",{x:1,f:3},"End"],
+[{y:-0.75,x:4,f:3},"Delete"],
+[{y:-0.9,f:3},"PgUp"],
+[{y:-0.7,x:2,a:7},"<i class='kb kb-Arrows-Down'></i>"],
+[{y:-0.65,x:1},"<i class='kb kb-Arrows-Left'></i>",{x:1},"<i class='kb kb-Arrows-Right'></i>"],
+[{y:-0.75,x:4,a:4,f:3},"Bksp"],
+[{y:-0.9,f:3},"PgDn"],
+[{y:-0.7,x:2,f:3},"Tab"],
+[{y:-0.65,x:1,f:3},"Shift+\n\n\n\n\n\nTab",{x:1,a:7},""],
+[{y:-0.75,x:4,a:4,f:3},"Insert"],
+[{y:-0.9,a:7},""],
+[{y:-0.75,x:-1,h:1.5},""],
+[{y:-0.95,x:2},""],
+[{y:-0.65,x:1},"",{x:1},""],
+[{y:-0.75,x:4,a:4,f:3},"Prnt Scrn"],
+[{y:-0.9,c:"#ffe08d",a:7},""]

keyboards/atreus/keymaps/replicaJunction/readme.md

@@ -1,61 +1,103 @@
-# replicaJunction - Atreus Layout #
+# replicaJunction - Atreus Layout
 
 This layout is designed to make the absolute most out of the Atreus 40% keyboard.
 
-I was enchanted with the idea of the Atreus keyboard after using my Ergodox for several months. I wanted something of a similar form factor that was easily portable, so I could bring and transport a keyboard to my workplace without much hassle. After building the Atreus keyboard, though, I realized very quickly that the 40% form factor requires a lot more creativity than a full-size keyboard (even one as strangely-shaped as the Ergodox).
+This layout is probably not perfect for you. That's okay! Use it for ideas as you design your own perfect layout.
 
-The default Atreus keyboard layout provides all the necessary keys in order to function with the keyboard, but as a programmer, I needed quicker access to just about everything. I noticed that the default layer didn't include any dual-role keys, and so I started on my journey to build my perfect layout for the Atreus.
+Most of the custom logic in this keyboard is actually not in these files. Instead, it's in the directory `/users/replicaJunction` (from the root of the QMK repo). This allows me to share macros and custom logic between multiple keyboards. A `process_record_keyboard()` function defined weakly in `replicaJunction.h` allows keyboards to process records individually as well without overriding the `process_record_user()` function. (My Ergodox uses this to handle its LEDs, for example.)
 
-I won't claim that this layout is perfect for everyone. It does make several significant changes from the "normal" Atreus layout. In my own use, though, I've found this keyboard turbocharges my Atreus, and gives it the power of a full-size keyboard without the size.
+The default letter layout in this keymap is [Colemak-ModDH](https://colemakmods.github.io/mod-dh/). I use the "matrix version" of that layout, which retains the M key on the home row as in normal Colemak.
 
-## Base Layer ##
+## Design Goals
 
-![Atreus base layout](http://imgur.com/YbOjS7O)
+I designed this layout with the following goals in mind:
 
-The letters on this layout are arranged in the [Colemak Mod-DH layout](https://colemakmods.github.io/mod-dh/).
+* Nothing may interfere with ordinary typing.
+* Symbols need to be accessible quickly and organized in a manner I can remember.
+* Limit more difficult finger movements (and pinky usage in general).
 
-The primary mechanism for the Shift keys in this keyboard are the dual-role Z and slash keys. Pressing the key sends the keystroke, while holding the key sends a shift. This is a design choice taken from the xyverz layout, and one I find much more intuitive than a thumb shift. In addition, the pinky doesn't need to stretch as far to reach these keys as it does to reach a standard Shift key.
+### Nothing may interfere with ordinary typing
 
-Occasionally, when typing the letter Z, I'll hold the key down a fraction of a second too long, and the keyboard will shift instead. If you're not a confident typist, this dual-role Shift key layout is probably not a good solution. In that case, I'd suggest moving Shift onto the Backspace key (press for Backspace, hold for Shift).
+For a long time, this meant that I couldn't use letters or home row keys as dual-role keys. I'm a fast typer, and I'm sometimes already typing the next letter before I've fully released the previous one. Normal keyboards don't care about this, but if I started adding dual-role functionality to letters, I found that I would sometimes type the next letter before releasing the layer toggle, and the letter I tried to send would still be sent under the layer I thought I'd left off.
 
-In addition to the Shift keys, there are three dual-purpose keys: Ctrl (Delete), Alt (Enter), and Space (Number layer). In QMK, these dual-role keys can be made to hold their primary key with a tap and hold. For example, if I wanted to insert a long string of Spaces, I would tap the Space key, then tap it again and hold. A single press and hold would trigger the secondary function of the key instead.
+Fortunately, though, QMK has addressed this with the `PERMISSIVE_HOLD` flag. [Details are on the QMK docs page.](https://docs.qmk.fm/#/feature_advanced_keycodes?id=permissive-hold)
 
-## Extend Layer ##
+Using that flag, I'm comfortable having layer shift keys on the home row, and this goes a long way to eliminate finger stress.
 
-![Atreus extend layer](http://imgur.com/WiKkMQw)
+### Sympols need to be accessible quickly
 
-This layout is designed primarily for keyboard navigation. Arrow keys are easily accessible under the right hand (a welcome change from the original Atreus layout, which places them under the left hand), along with Home/End and PgUp/PgDn.
+Symbols are available under my left hand by holding the I key (on my right hand). I've grouped parenthesis, slashes, and braces together; the remaining symbols are ordered in the same way as they appear on USA keycap legends (for example, 1 is !, so that symbol is first in my lineup). Practically, I just had to get used to these other "misc" symbols.
 
-Modifiers are also placed under the home row of the left hand. One of the single keyboard actions I use most is Shift+Ctrl+Left/Right to select a whole word; this layer makes those keypresses simple by adding the Ctrl key in an easy-to-reach location.
+This also means that some symbols are accessible in more than one way. For example, the carats (greater than and less than) are available both in the "normal" location (Shift+Comma / Shift+Period) and on the symbol layer. I make regular changes to some of the symbols I don't use as commonly as I think of them.
 
-For the common Ctrl shortcuts, I also added some hotkeys to this layer over the letter keys they are associated with. This gives the Extend key some extra utility by letting it "feel" like a Ctrl key in some cases.
+### Limit more difficult finger movements
 
-The Space key exists to prevent going from this layer directly into the Number layer. Similarly, the Shift key on the left pinky helps make sure that the normal letter (Z) doesn't fire.
+This is why I kept trying to put layer toggles on the home row keys instead of just placing them on random thumb keys. I suffer from RSI, and it's important for me to watch out for more "stressful" finger movements.
 
-## Number and Symbol Layer ##
+The home row is the easiest row for your fingers to hit, followed by the upper row, and the lower row is noticeably more difficult to press. Because of this, I favored the upper row over the lower one any time I had the option to do so.
 
-![Atreus number and symbol layer](http://imgur.com/gfTXcjC)
+## Features
 
-This layer provides the only way of accessing number keys on this keyboard, since it's too small for its own number row. Note that even though they are laid out in the number pad fashion, they send the "regular" number keystrokes. Games and programs that specifically use NumPad keys are not supported in this layout at the moment.
+### ZXC Mods
 
-This layer also provides plenty of symbol shortcuts. Most of these can be accessed through other means (like Shift+8 for the asterisk), but having shortcut keys to them makes for one less keypress, which adds up quickly when using these symbols on a regular basis. I've been through many revisions of this concept on my Ergodox as well as the Atreus, and I've finally arrived at this layout as the one that provides the symbols I need most frequently in places I can think to expect them. The Ordinary layout from the Ergodox-EZ keyboard in this repository was a large influence in this design.
+Keys on the bottom row of each half of this keyboard can be held to send modifier keys. I've tried to map this in a relatively logical manner:
 
-## Function Layer ##
+* Z / Slash: Ctrl
+* X / Period: GUI
+* C / Comma: Ctrl+Alt
+* D / H: Alt
 
-![Atreus function layer](http://imgur.com/m5x0MxZ)
+Combined with Shift keys on the thumbs, this makes all modifiers quick to access on either hand.
 
-Function keys (F1-F12) are on this layer. Their layout in groups of four comes from Jeremy's Atreus layout in this repository. I'd been using 1-9 in a numpad layout, then adding 10-12 on the side...I suppose it took seeing someone else do it this way for me to realize how much more sense it makes.
+### Layer tap dance
 
-On the right side are mouse keys - cursor left/right/up/down, and scroll up/down. Volume keys are also here, though really only because there was room for them (I'm not entirely happy with their positions).
+The lower-left key on the left hand can be used to apply or remove layers based on a number of taps:
 
-Finally, the reset key is on this layer, as well as toggles from Colemak to QWERTY and back. The QWERTY layer is not currently documented, but it is functionally identical to the base layer except for letter positions.
+* 1 tap sends Escape, and also disables any persistent layers.
+* 2 taps enables the Number pad layer.
+* 5 or more taps resets the keyboard.
 
-## Gaming Layer ##
+## Extend Layer
 
-![Atreus gaming layer](http://imgur.com/4S5AO4E)
+[Originally found on the Colemak forums](https://forum.colemak.com/topic/2014-extend-extra-extreme/), having a QMK-powered keyboard allows a super easy implementation of this concept. The idea is to place commonly-used keys under easy reach of your hands. Since I work with text often, my most common needs are things like Ctrl+Shift+arrow keys, and they're easy to access using this layer. (While technically it's four keypresses instead of just three, since it takes one key to enter the layer, that one key is a thumb button and the other three are all on the home row, so I find it much more comfortable than modifiers on a traditional keyboard.)
 
-This is a small layer developed to allow some simple gameplay without a mouse. This layer is a toggle (from the Number layer), so it is designed to stay on while in use.
+Also featured in this layer is easy access to Tab, plus a Shift+Tab key. Alt-Tabbing back and forth, along with Ctrl-Tab, are super easy and friendly. When I need Ctrl+Alt+Delete, I typically use the ones found on this layer.
 
-The keys on the left hand bring Space into the left thumb's reach, as well as overriding the dual-role Shift with its standard function (Z in both QWERTY and in Colemak). This allows easy Shift presses without blocking the Z key, commonly used in games.
+## Layout Images
 
-I would probably not consider the Atreus a hard-core gaming keyboard in the first place, and this layout does have the huge problem of blocking access to the number keys, but for more casual games, it plays quite well. I've used it quite a bit on Minecraft, for example, and I'm quite pleased with it.
+Colored keys indicate keys that swap to another layer when held.
+
+These images are located in the `kle` folder of this directory. Also included is the "raw data" from Keyboard-Layout-Editor in a corresponding text file.
+
+### Base layer
+
+![Base layer](kle/base-layer.png)
+
+### R layer
+
+![R layer](kle/r-layer.png)
+
+### E layer
+
+![E layer](kle/i-layer.png)
+
+### I layer
+
+![I layer](kle/i-layer.png)
+
+### Space layer
+
+![Space layer](kle/space-layer.png)
+
+### Function layer
+
+![Function layer](kle/fn-layer.png)
+
+## Credits
+
+* [Drashna](https://github.com/qmk/qmk_firmware/blob/master/users/drashna/readme.md)
+  * User / keymap function ideas
+* [Jeremy](https://github.com/qmk/qmk_firmware/blob/master/keyboards/atreus/keymaps/jeremy/readme.md)
+  * Sanity check on the Function keys (_of course they should be in rows of 4, not rows of 3 like a number pad. Why did I ever use anything else?_)
+* [DreymaR of the Colemak forums](https://forum.colemak.com/topic/2014-extend-extra-extreme/)
+  * Original idea of the Extend layer

keyboards/atreus/keymaps/replicaJunction/rules.mk

@@ -0,0 +1,12 @@
+# https://docs.qmk.fm/getting_started_make_guide.html
+
+MOUSEKEY_ENABLE = yes
+TAP_DANCE_ENABLE = yes
+# KEY_LOCK_ENABLE = yes
+# CONSOLE_ENABLE = no
+# COMMAND_ENABLE = no
+
+# Use the "Unicode map" method
+# UNICODE_ENABLE = no
+# UNICODEMAP_ENABLE = yes
+

keyboards/atreus/readme.md

@@ -5,12 +5,17 @@ A small mechanical keyboard that is based around the shape of the human hand.
 
 These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, (usually hand-wired) one powered by an A-Star. (usually using a PCB) This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands.
 
-Keyboard Maintainer: QMK Community  
-Hardware Supported: Atreus PCB  
+Keyboard Maintainer: [Phil Hagelberg](https://github.com/technomancy)  
+Hardware Supported: Atreus, PCB-based or hand-wired  
 Hardware Availability: https://atreus.technomancy.us
 
 Make example for this keyboard (after setting up your build environment):
 
     make atreus:default:avrdude
 
+Unlike the TMK firmware, this command should be run from the root of
+the repository, not the directory containing this readme.
+
+If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands.
+
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/atreus/rules.mk

@@ -5,6 +5,9 @@ ifdef TEENSY2
     ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 else
     OPT_DEFS += -DATREUS_ASTAR
+ifdef PCBDOWN
+    OPT_DEFS += -DPCBDOWN
+endif
     ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                             avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 endif

keyboards/bface/README.md

@@ -0,0 +1,44 @@
+# B.face
+
+A 60% keyboard with RGB that runs ps2avrgb natively. Please note that the B.face and B.fake have different switch matrices. Firmware on one, will not work on the other. 
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: B.face PCB   
+Hardware Availability: [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/)   
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bface:default
+
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    brew install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+    ```
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/bface/backlight_ps2avrGB.c

@@ -0,0 +1,94 @@
+/* Copyright 2017 Sebastian Kaim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef BACKLIGHT_ENABLE
+
+#include "backlight_ps2avrGB.h"
+#define sbi(reg,bit)	reg |= (_BV(bit))
+#define cbi(reg,bit)	reg &= (~_BV(bit))
+#define PWM10	WGM10
+#define PWM11	WGM11
+#define COM1x1 COM1B1
+#define OCR1x  OCR1B
+
+void backlight_init_ports(void)
+{
+#if BACKLIGHT_ON_STATE == 0
+	backlight_off();
+#else
+	backlight_on();
+#endif
+
+	// setup pwm
+	// this bitmagic is sourced from the original firmware
+	/*TCCR1B = ((TCCR1B & ~0x07) | 0x03);
+	TCNT1H = 0;
+	TCNT1L = 0;
+	sbi(TIMSK, TOIE1);
+	OCR1BH = 0;
+	OCR1BL = 0;
+	cbi(TCCR1A,PWM11);
+	sbi(TCCR1A,PWM10);
+	sbi(TCCR1A,COM1B1);
+	cbi(TCCR1A,COM1B0);*/
+	ICR1 = 0xFFFF;
+
+    TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
+    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+
+	backlight_init();
+}
+
+void backlight_set(uint8_t level)
+{
+	if( level == 0 ) {
+		backlight_off();
+	}
+	else {
+		backlight_on();
+		/*uint8_t pwm = get_pwm_for_brightness(level);
+		set_backlight_pwm(pwm);
+		TCCR1A |= _BV(COM1x1);
+		OCR1x = (level >= 2) ? 0xFFFF : 0x00FF;*/
+	}
+}
+
+#define PWM_MAX 0xFF
+uint8_t get_pwm_for_brightness(uint8_t level)
+{
+	// we need to cast up here to allow multiplication with 0xFF. We could also use floats, but this is probably a lot faster.
+	uint16_t brightness = (uint16_t)level * (uint16_t)PWM_MAX / (uint16_t)BACKLIGHT_LEVELS;
+	return (uint8_t)brightness;
+}
+
+void backlight_on(void)
+{
+	//_SFR_IO8(0x12) |= _BV(0x4);
+	LED_PIN |= BACKLIGHT_PORT_NUM;
+}
+
+void backlight_off(void)
+{
+	//_SFR_IO8(0x12) &= ~_BV(0x4);
+	LED_PIN &= ~BACKLIGHT_PORT_NUM;
+}
+
+void set_backlight_pwm(uint8_t level) {
+	// this does not work (yet)
+	//OCR1B = level;
+}
+
+#endif // BACKLIGHT_ENABLE

keyboards/bface/backlight_ps2avrGB.h

@@ -0,0 +1,35 @@
+/* Copyright 2017 Sebastian Kaim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#if defined(__AVR__)
+#include <avr/pgmspace.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#endif
+#include <stddef.h>
+#include <stdlib.h>
+#include "backlight.h"
+
+#ifndef PS2AVRGB_BACKLIGHT_H
+#define PS2AVRGB_BACKLIGHT_H
+
+uint8_t get_pwm_for_brightness(uint8_t level);
+void set_backlight_pwm(uint8_t level);
+void backlight_on(void);
+void backlight_off(void);
+
+#endif

keyboards/bface/bface.c

@@ -0,0 +1,46 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Copyright 2018 Sebastian Kaim <sebb@sebb767.de>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "bface.h"
+#include "rgblight.h"
+
+#include <avr/pgmspace.h>
+
+#include "action_layer.h"
+#include "i2c.h"
+#include "quantum.h"
+
+extern rgblight_config_t rgblight_config;
+
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+            led[i].r = 0;
+            led[i].g = 0;
+            led[i].b = 0;
+        }
+    }
+
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+    rgblight_task();
+}

keyboards/bface/bface.h

@@ -0,0 +1,44 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Copyright 2017 Sebastian Kaim <sebb@sebb767.de>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include "quantum_keycodes.h"
+#include "keycode.h"
+#include "action.h"
+
+#define LAYOUT_60_ansi( \
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2,      KD2, \
+  K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \
+  K00, K10, K20,           K56,                K57, KA0, KB0, KC0  \
+){ \
+  { K00,   K10,   K20,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KA0,   KB0,   KC0,   KC_NO, KC_NO }, \
+  { K01,   K11,   K21,   K31,   K41,   K51,   KC_NO, KC_NO, KC_NO, KC_NO, KA1,   KB1,   KC_NO, KC_NO, KC_NO }, \
+  { K02,   K12,   K22,   K32,   K42,   K52,   KC_NO, KC_NO, KC_NO, KC_NO, KA2,   KB2,   KC_NO, KD2,   KC_NO }, \
+  { K03,   K13,   K23,   K33,   K43,   K53,   KC_NO, KC_NO, KC_NO, KC_NO, KA3,   KB3,   KC3,   KD3,   KC_NO }, \
+  { K04,   K14,   K24,   K34,   K44,   K54,   KC_NO, KC_NO, KC_NO, KC_NO, KA4,   KB4,   KC4,   KC_NO, KE4   }, \
+  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+  { KC_NO, K16,   K26,   K36,   K46,   K56,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6,   KC6,   KD6,   KE6   }, \
+  { KC_NO, K17,   K27,   K37,   K47,   K57,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7,   KC7,   KD7,   KE7   } \
+}
+
+
+#endif

keyboards/bface/config.h

@@ -0,0 +1,49 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Copyright 2017 Sebastian Kaim <sebastian.kaim@sebb767.de>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+// You can edit those at usbconfig.h about line 250. These values will 
+// unforunatly be ignored so far
+#define MANUFACTURER    winkeyless.kr
+#define PRODUCT         b.face
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+#define RGBLED_NUM 16
+#define RGBLIGHT_ANIMATIONS
+
+#define NO_UART 1
+#define BOOTLOADHID_BOOTLOADER 1
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+#ifdef BACKLIGHT_ENABLE
+	// the backlight PWM does not work (yet). Therefore, we only have two backlight levels (on/off)
+	#define BACKLIGHT_LEVELS 1
+	#define LED_PIN PORTD
+	#define BACKLIGHT_PORT_NUM (1 << 4)
+#endif
+
+#endif

keyboards/bface/i2c.c

@@ -0,0 +1,104 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+    if (bitrate_div >= 16) {
+        bitrate_div = (bitrate_div - 16) / 2;
+    }
+    TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
+
+    i2c_set_bitrate(400);
+
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
+
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+    // reset TWI control register
+    TWCR = 0;
+
+    // begin transmission and wait for it to end
+    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the start condition was successfully transmitted
+    if ((TWSR & 0xF8) != TW_START) {
+        return 1;
+    }
+
+    // transmit address and wait
+    TWDR = address;
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+void i2c_stop(void) {
+    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+    TWDR = data;
+
+    // transmit data and wait
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+        return 1;
+    }
+
+    return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+    if (i2c_start(address)) {
+        return 1;
+    }
+
+    for (uint16_t i = 0; i < length; i++) {
+        if (i2c_write(data[i])) {
+            return 1;
+        }
+    }
+
+    i2c_stop();
+
+    return 0;
+}

keyboards/bface/i2c.h

@@ -0,0 +1,25 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+
+#endif

keyboards/bface/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "b.face",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+      "LAYOUT_60_ansi": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      }
+  }
+}

keyboards/bface/keymaps/default/keymap.c

@@ -0,0 +1,47 @@
+/*
+Copyright 2017 Sebastian Kaim <sebastian.kaim@sebb767.de>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_60_ansi(
+        KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,
+        KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,
+        KC_F1,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,
+        KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,        KC_RSFT,
+        KC_LCTL,KC_LALT,KC_LGUI,                KC_SPC,                         KC_RALT,KC_RGUI,MO(1), KC_RCTL
+    ),
+    [1] = LAYOUT_60_ansi(
+        KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,BL_INC, BL_DEC, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,RGB_SMOD,KC_TRNS,BL_ON, BL_OFF, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    ),
+    /* You can copy this layer as base for a new fn layer * /
+	[n] = LAYOUT_60_ansi(
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    ), // */
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0]  = ACTION_LAYER_MOMENTARY(1),
+};

keyboards/bface/keymaps/kpeatt/keymap.c

@@ -0,0 +1,79 @@
+/*
+Copyright 2017 Kyle Peatt <kpeatt@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+#define ______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Qwerty
+    * ,-----------------------------------------------------------------------------------------.
+    * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+    * |-----------------------------------------------------------------------------------------+
+    * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+    * |-----------------------------------------------------------------------------------------+
+    * | Caps/FN |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+    * |-----------------------------------------------------------------------------------------+
+    * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |     RShift      |
+    * |-----------------------------------------------------------------------------------------+
+    * | Ctrl |  GUI  |  Alt  |              Space                |  Alt  |  GUI  |  Ctrl |  Fn  |
+    * `-----------------------------------------------------------------------------------------'
+    */
+
+    [0] = LAYOUT_60_ansi(
+        KC_GESC, KC_1,  KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL, KC_BSPC,
+        KC_TAB,  KC_Q,  KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC,KC_BSLS,
+        LT(1, KC_CAPS), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+        KC_LCTL,KC_LGUI,KC_LALT,                KC_SPC,                          KC_RALT,KC_RGUI, KC_RCTL, MO(1)
+    ),
+
+    /* FN Layer
+    * ,-----------------------------------------------------------------------------------------.
+    * |  `~ | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10  | F11  | F12  |        |
+    * |-----------------------------------------------------------------------------------------+
+    * |        |     |  Up |     |     |     |     |     |     |     |RGBMOD| Val+| Val- |RBGTOG|
+    * |-----------------------------------------------------------------------------------------+
+    * |         | Left| Down|Right|     |     |     |     | Sat+| Sat-| Hue+| Hue-|             |
+    * |-----------------------------------------------------------------------------------------+
+    * |           |     |     |     |     |     |     |     |     |     |     |     |     |     |
+    * |-----------------------------------------------------------------------------------------+
+    * |      |       |       |                                   |     |      |     |     |     |
+    * `-----------------------------------------------------------------------------------------'
+    */
+
+    [1] = LAYOUT_60_ansi(
+        KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, ______,
+        ______,______,KC_UP,______,______,______,______,______,______,______,RGB_MOD,RGB_VAI,RGB_VAD,RGB_TOG,
+        ______,KC_LEFT,KC_DOWN,KC_RGHT,______, ______, ______,______,RGB_SAI,RGB_SAD,RGB_HUI,RGB_HUD,______,
+        ______,______,______,______,______, ______, ______,______,______,______,______,        ______,
+        ______,______,______,                ______,                        ______,______,______,______
+    ),
+    /* You can copy this layer as base for a new fn layer * /
+	[n] = LAYOUT_60_ansi(
+        ______,______,______,______,______,______,______,______,______,______,______,______,______,______,
+        ______,______,______,______,______,______,______,______,______,______,______,______,______,______,
+        ______,______,______,______,______,______,______,______,______,______,______,______,______,
+        ______,______,______,______,______,______,______,______,______,______,______,        ______,
+        ______,______,______,                ______,                        ______,______,______,______
+    ), // */
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0]  = ACTION_LAYER_MOMENTARY(1),
+};

keyboards/bface/keymaps/kpeatt/readme.md

@@ -0,0 +1,10 @@
+kpeatt's bface layout
+======================
+
+## Keyboard Notes
+- This is for a clone bface PCB that is no longer for sale as far as I can tell. [Used to be sold on KBDFans](https://www.aliexpress.com/item/bface-60-RGB-underground-copy-pcb-from-china-gh60-pcb-Customize-keyboard-PCB/32731084597.html).
+- To put in reset mode hold `left ctrl` while inserting the USB cable
+- Use flashing instructions in the main `bface` directory
+
+### Build
+To build this keymap, run `make bface:kpeatt` from the qmk_firmware directory.

keyboards/bface/matrix.c

@@ -0,0 +1,113 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/delay.h>
+
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+
+static uint8_t debouncing = DEBOUNCE;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+void matrix_init(void) {
+    // all outputs for rows high
+    DDRB = 0xFF;
+    PORTB = 0xFF;
+    // all inputs for columns
+    DDRA = 0x00;
+    DDRC &= ~(0x111111<<2);
+    DDRD &= ~(1<<PIND7);
+    // all columns are pulled-up
+    PORTA = 0xFF;
+    PORTC |= (0b111111<<2);
+    PORTD |= (1<<PIND7);
+
+    // initialize matrix state: all keys off
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix[row] = 0x00;
+        matrix_debouncing[row] = 0x00;
+    }
+
+	// activate backlight
+	//PORTD |= (1 << 4);
+	//_SFR_IO8(0x09) |= (1 << 4); //_BV(0x94 & 0xF);
+	//
+	// this is the code that *should* be executed in quantum.c
+	_SFR_IO8(0x12) |= _BV(0x4);
+}
+
+void matrix_set_row_status(uint8_t row) {
+    DDRB = (1 << row);
+    PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+    return x;
+}
+
+uint8_t matrix_scan(void) {
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix_set_row_status(row);
+        _delay_us(5);
+
+        matrix_row_t cols = (
+            // cols 0..7, PORTA 0 -> 7
+            (~PINA) & 0xFF
+        ) | (
+            // cols 8..13, PORTC 7 -> 0
+            bit_reverse((~PINC) & 0xFF) << 8
+        ) | (
+            // col 14, PORTD 7
+            ((~PIND) & (1 << PIND7)) << 7
+        );
+
+        if (matrix_debouncing[row] != cols) {
+            matrix_debouncing[row] = cols;
+            debouncing = DEBOUNCE;
+        }
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    matrix_scan_user();
+
+    return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+}

keyboards/bface/program

@@ -0,0 +1,105 @@
+#!/usr/bin/env python
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>, Sebastian Kaim <sebb@sebb767.de>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+from __future__ import print_function
+
+import os
+import sys
+import time
+import usb
+
+
+def checkForKeyboardInNormalMode():
+    """Returns a device if a ps2avrGB device in normal made (that is in keyboard mode) or None if it is not found."""
+    return usb.core.find(idVendor=0x20A0, idProduct=0x422D)
+
+def checkForKeyboardInBootloaderMode():
+    """Returns True if a ps2avrGB device in bootloader (flashable) mode is found and False otherwise."""
+    return (usb.core.find(idVendor=0x16c0, idProduct=0x05df) is not None)
+
+def flashKeyboard(firmware_file):
+    """Calls bootloadHID to flash the given file to the device."""
+    print('Flashing firmware to device ...')
+    if os.system('bootloadHID -r "%s"' % firmware_file) == 0:
+        print('\nDone!')
+    else:
+        print('\nbootloadHID returned an error.')
+
+def printDeviceInfo(dev):
+    """Prints all infos for a given USB device"""
+    print('Device Information:')
+    print('  idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
+    print('  idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
+    print('Manufacturer: %s' % (dev.iManufacturer))
+    print('Serial: %s' % (dev.iSerialNumber))
+    print('Product: %s' % (dev.iProduct), end='\n\n')
+
+def sendDeviceToBootloaderMode(dev):
+    """Tries to send a given ps2avrGB keyboard to bootloader mode to allow flashing."""
+    try:
+        dev.set_configuration()
+
+        request_type = usb.util.build_request_type(
+                usb.util.CTRL_OUT,
+                usb.util.CTRL_TYPE_CLASS,
+                usb.util.CTRL_RECIPIENT_DEVICE)
+
+        USBRQ_HID_SET_REPORT = 0x09
+        HID_REPORT_OPTION = 0x0301
+
+        dev.ctrl_transfer(request_type, USBRQ_HID_SET_REPORT, HID_REPORT_OPTION, 0, [0, 0, 0xFF] + [0] * 5)
+    except usb.core.USBError:
+        # for some reason I keep getting USBError, but it works!
+        pass
+
+
+if len(sys.argv) < 2:
+    print('Usage: %s <firmware.hex>' % sys.argv[0])
+    sys.exit(1)
+
+kb = checkForKeyboardInNormalMode()
+
+if kb is not None:
+    print('Found a keyboad in normal mode. Attempting to send it to bootloader mode ...', end='')
+    sendDeviceToBootloaderMode(kb)
+    print(' done.')
+    print("Hint: If your keyboard can't be set to bootloader mode automatically, plug it in while pressing the bootloader key to do so manually.")
+    print("      You can find more infos about this here: https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB#setting-the-board-to-bootloader-mode")
+
+attempts = 12  # 60 seconds
+found = False
+for attempt in range(1, attempts + 1):
+    print("Searching for keyboard in bootloader mode (%i/%i) ... " % (attempt, attempts), end='')
+
+    if checkForKeyboardInBootloaderMode():
+        print('Found', end='\n\n')
+        flashKeyboard(sys.argv[1])
+        found = True
+        break
+    else:
+        print('Nothing.', end='')
+
+        if attempt != attempts:  # no need to wait on the last attempt
+            print(' Sleeping 5 seconds.', end='')
+            time.sleep(5)
+
+        # print a newline
+        print()
+
+if not found:
+    print("Couldn't find a flashable keyboard. Aborting.")
+    sys.exit(2)
+

keyboards/bface/rules.mk

@@ -0,0 +1,49 @@
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# build options
+BOOTMAGIC_ENABLE = yes
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+BACKLIGHT_CUSTOM_DRIVER = yes
+BACKLIGHT_BREATHING = no
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c i2c.c backlight_ps2avrGB.c
+
+# programming options
+PROGRAM_CMD = ./keyboards/bface/program .build/$(TARGET).hex
+
+LAYOUTS = 60_ansi

keyboards/bface/usbconfig.h

@@ -0,0 +1,396 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME_LEN 13
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'b', '.', 'f', 'a', 'c', 'e'
+#define USB_CFG_DEVICE_NAME_LEN 6
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */

keyboards/bigseries/1key/1key.c

@@ -14,7 +14,7 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include "bigseries.h"
+#include "1key.h"
 
 void matrix_scan_kb(void) {
   // Looping keyboard code goes here

keyboards/bigseries/1key/config.h

@@ -54,6 +54,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 5
+#ifdef RGBLIGHT_LIMIT_VAL
+#undef RGBLIGHT_LIMIT_VAL
+#endif
+#define RGBLIGHT_LIMIT_VAL 128
 #endif
 
 #endif

keyboards/bigseries/1key/keymaps/ctrl-alt-del/keymap.c

@@ -0,0 +1,91 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    LCTL(LALT(KC_DEL))
+    ),
+
+
+};
+
+
+bool initialized = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      // Disable to set a known state
+      rgblight_disable();
+      rgblight_init();
+      // None of the subsequent operations take effect if not enabled
+      rgblight_enable();
+      rgblight_sethsv(0,0,255);
+      rgblight_mode(7);
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/1key/keymaps/lock/keymap.c

@@ -0,0 +1,88 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    LGUI(KC_L)),
+
+
+};
+
+
+bool initialized = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      // Disable to set a known state
+      rgblight_disable();
+      rgblight_init();
+      // None of the subsequent operations take effect if not enabled
+      rgblight_enable();
+      rgblight_sethsv(0,0,255);
+      rgblight_mode(7);
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/1key/keymaps/tester/keymap.c

@@ -0,0 +1,96 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    KC_A),
+
+
+};
+
+
+bool initialized = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      // Disable to set a known state
+      rgblight_disable();
+      rgblight_init();
+      // None of the subsequent operations take effect if not enabled
+      rgblight_enable();
+      rgblight_sethsv(0,0,255);
+      rgblight_mode(35);
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  case KC_A:
+    if (record->event.pressed) {
+      SEND_STRING("Howdy!!\n");
+      rgblight_step();
+      return false;
+    }
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/1key/readme.md

@@ -0,0 +1,15 @@
+# Big Series Keyboard
+
+![Big Series 1-Key](https://woodkeys.click/wp-content/uploads/2017/12/woodkeys_419.jpg)
+
+A PCB for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/).
+
+Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click)  
+Hardware Supported: Big Series PCBs  
+Hardware Availability:  [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bigseries/1key:default
+
+See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/build-compile-instructions) for more information.

keyboards/bigseries/1key/rules.mk

@@ -0,0 +1 @@
+# Dummy file to make the QMK build system happy

keyboards/bigseries/2key/2key.c

@@ -0,0 +1,26 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "2key.h"
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+#ifdef BACKLIGHT_ENABLE
+  backlight_task();
+#endif
+};

keyboards/bigseries/2key/2key.h

@@ -0,0 +1,28 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef BIGSWITCH_H
+#define BIGSWITCH_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K00, K01  \
+) { \
+  { K00, K01 }  \
+}
+
+#endif

keyboards/bigseries/2key/config.h

@@ -0,0 +1,63 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6071
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    WoodKeys.click
+#define PRODUCT         BigSeries Single Keyboard
+#define DESCRIPTION     Single key board for Novelkeys Big Series Switch
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 2
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0 }
+#define MATRIX_COL_PINS { B4, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 50
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    false \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8
+#ifdef RGBLIGHT_LIMIT_VAL
+#undef RGBLIGHT_LIMIT_VAL
+#endif
+#define RGBLIGHT_LIMIT_VAL 128
+#endif
+
+#endif

keyboards/bigseries/2key/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "Big Series 2-Key",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 8,
+  "height": 4,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [{"x":0, "y":0, "w":4, "h":4}, {"x":4, "y":0, "w":4, "h":4}]
+    }
+  }
+}

keyboards/bigseries/2key/keymaps/default/keymap.c

@@ -0,0 +1,87 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    KC_Z, KC_X),
+
+
+};
+
+
+bool initialized = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+    // Disable to set a known state
+    rgblight_disable();
+    rgblight_init();
+    // None of the subsequent operations take effect if not enabled
+    rgblight_enable();
+    rgblight_sethsv(0,0,255);
+    rgblight_mode(35);
+    initialized = 1;
+  }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/2key/keymaps/lock/keymap.c

@@ -0,0 +1,89 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    LGUI(KC_L), LCTL(LALT(KC_DEL))
+    ),
+
+
+};
+
+
+bool initialized = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      // Disable to set a known state
+      rgblight_disable();
+      rgblight_init();
+      // None of the subsequent operations take effect if not enabled
+      rgblight_enable();
+      rgblight_sethsv(0,0,255);
+      rgblight_mode(7);
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/2key/keymaps/tester/keymap.c

@@ -0,0 +1,88 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    KC_A, KC_B),
+
+
+};
+
+
+bool initialized = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      // Disable to set a known state
+      rgblight_disable();
+      rgblight_init();
+      // None of the subsequent operations take effect if not enabled
+      rgblight_enable();
+      rgblight_sethsv(0,0,255);
+      rgblight_mode(35);
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/2key/readme.md

@@ -0,0 +1,15 @@
+# Big Series Keyboard
+
+![Big Series 2-Key](https://woodkeys.click/wp-content/uploads/2018/04/BigSeries_2u_Case_2018-Apr-03_08-45-05PM-000_CustomizedView8990071229.png)
+
+A PCB for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/).
+
+Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click)  
+Hardware Supported: Big Series PCBs  
+Hardware Availability:  [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bigseries/2key:default
+
+See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/build-compile-instructions) for more information.

keyboards/bigseries/2key/rules.mk

@@ -0,0 +1 @@
+# Dummy file to make the QMK build system happy

keyboards/bigseries/3key/3key.c

@@ -0,0 +1,26 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "3key.h"
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+#ifdef BACKLIGHT_ENABLE
+  backlight_task();
+#endif
+};

keyboards/bigseries/3key/3key.h

@@ -0,0 +1,28 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef BIGSWITCH_H
+#define BIGSWITCH_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K00, K01, K02  \
+) { \
+  { K00, K01, K02 }  \
+}
+
+#endif

keyboards/bigseries/3key/config.h

@@ -0,0 +1,63 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6073
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    WoodKeys.click
+#define PRODUCT         BigSeries Triple Keyboard
+#define DESCRIPTION     Triple key board for Novelkeys Big Series Switch
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 3
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0 }
+#define MATRIX_COL_PINS { B4, B3, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 50
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    false \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 11
+#ifdef RGBLIGHT_LIMIT_VAL
+#undef RGBLIGHT_LIMIT_VAL
+#endif
+#define RGBLIGHT_LIMIT_VAL 128
+#endif
+
+#endif