Massdrop keyboard support (#3780)

* Massdrop SAMD51

Massdrop SAMD51 keyboards initial project upload

* Removing relocated files

Removing files that were relocated and not deleted from previous location

* LED queue fix and cleaning

Cleaned some white space or comments.
Fix for LED I2C command queue.
Cleaned up interrupts.
Added debug function for printing numbers to scope through m15 line.

* Factory programmed serial usage

Ability to use factory programmed serial in hub and keyboard usb descriptors

* USB serial number and bugfix

Added support for factory programmed serial and usage.
Incorporated bootloader's conditional compiling to align project closer.
Fixed issue when USB device attempted to send before enabled.
General white space and comment cleanup.

* Project cleanup

Cleaned up project in terms of white space, commented code, and unecessary files.
NKRO keyboard is now using correct setreport although KBD was fine to use.
Fixed broken linkage to __xprintf for serial debug statements.

* Fix for extra keys

Fixed possible USB hang on extra keys report set missing

* I2C cleanup

I2C cleanup and file renames necessary for master branch merge

* Boot tracing and clocks cleanup

Added optional boot debug trace mode through debug LED codes.
General clock code cleanup.

* Relocate ARM/Atmel headers

Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes.

* Pull request changes

Pull request changes

* Keymap and compile flag fix

Keymap fix for momentary layer.
Potential compile flag fix for Travis CI failure.

* va_list include fix

Fix for va_list compile failure

* Include file case fixes

Fixes for include files with incorrect case

* ctrl and alt67 keyboard readme

Added ctrl and alt67 keyboard readme files

build_keyboard.mk

@@ -144,6 +144,9 @@ endif
 ifdef MCU_FAMILY
     FIRMWARE_FORMAT?=bin
     PLATFORM=CHIBIOS
+else ifdef ARM_ATSAM
+    PLATFORM=ARM_ATSAM
+    FIRMWARE_FORMAT=bin
 else
     PLATFORM=AVR
     FIRMWARE_FORMAT?=hex
@@ -286,6 +289,11 @@ endif
     include $(TMK_PATH)/avr.mk
 endif
 
+ifeq ($(PLATFORM),ARM_ATSAM)
+    include $(TMK_PATH)/arm_atsam.mk
+    include $(TMK_PATH)/protocol/arm_atsam.mk
+endif
+
 ifeq ($(PLATFORM),CHIBIOS)
     include $(TMK_PATH)/protocol/chibios.mk
 endif

common_features.mk

@@ -61,8 +61,8 @@ endif
 
 ifeq ($(strip $(STENO_ENABLE)), yes)
     OPT_DEFS += -DSTENO_ENABLE
-	VIRTSER_ENABLE := yes
-	SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
+    VIRTSER_ENABLE := yes
+    SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
 endif
 
 ifeq ($(strip $(VIRTSER_ENABLE)), yes)
@@ -75,9 +75,9 @@ ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
-	OPT_DEFS += -DPOINTING_DEVICE_ENABLE
-	OPT_DEFS += -DMOUSE_ENABLE
-	SRC += $(QUANTUM_DIR)/pointing_device.c
+    OPT_DEFS += -DPOINTING_DEVICE_ENABLE
+    OPT_DEFS += -DMOUSE_ENABLE
+    SRC += $(QUANTUM_DIR)/pointing_device.c
 endif
 
 ifeq ($(strip $(UCIS_ENABLE)), yes)
@@ -110,12 +110,14 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
     else
-	    SRC += ws2812.c
+        SRC += ws2812.c
     endif
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
     OPT_DEFS += -DRGB_MATRIX_ENABLE
+    OPT_DEFS += -DIS31FL3731
+    COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3731.c
     SRC += i2c_master.c
     SRC += $(QUANTUM_DIR)/color.c
@@ -123,6 +125,28 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
     CIE1931_CURVE = yes
 endif
 
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
+    OPT_DEFS += -DRGB_MATRIX_ENABLE
+    OPT_DEFS += -DIS31FL3731
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3731.c
+    SRC += i2c_master.c
+    SRC += $(QUANTUM_DIR)/color.c
+    SRC += $(QUANTUM_DIR)/rgb_matrix.c
+    CIE1931_CURVE = yes
+endif
+
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
+    OPT_DEFS += -DRGB_MATRIX_ENABLE
+    OPT_DEFS += -DIS31FL3733
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3733.c
+    SRC += i2c_master.c
+    SRC += $(QUANTUM_DIR)/color.c
+    SRC += $(QUANTUM_DIR)/rgb_matrix.c
+    CIE1931_CURVE = yes
+endif
+
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
     OPT_DEFS += -DTAP_DANCE_ENABLE
     SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
@@ -169,7 +193,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
         CIE1931_CURVE = yes
     endif
-		ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+        ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
     endif
 endif
@@ -200,7 +224,7 @@ endif
 
 ifeq ($(strip $(HD44780_ENABLE)), yes)
     SRC += drivers/avr/hd44780.c
-	OPT_DEFS += -DHD44780_ENABLE
+    OPT_DEFS += -DHD44780_ENABLE
 endif
 
 QUANTUM_SRC:= \

docs/_sidebar.md

@@ -36,6 +36,7 @@
   * [Documentation Templates](documentation_templates.md)
   * [Glossary](reference_glossary.md)
   * [Unit Testing](unit_testing.md)
+  * [Useful Functions](ref_functions.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)

docs/_summary.md

@@ -36,6 +36,7 @@
   * [Documentation Templates](documentation_templates.md)
   * [Glossary](reference_glossary.md)
   * [Unit Testing](unit_testing.md)
+  * [Useful Functions](ref_functions.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)

docs/feature_backlight.md

@@ -51,3 +51,22 @@ In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus th
 
 The breathing effect is achieved by registering an interrupt handler for `TIMER1_OVF_vect` that is called whenever the counter resets, roughly 244 times per second.
 In this handler, the value of an incrementing counter is mapped onto a precomputed brightness curve. To turn off breathing, the interrupt handler is simply disabled, and the brightness reset to the level stored in EEPROM.
+
+## Backlight Functions
+
+|Function  |Description                                               |
+|----------|----------------------------------------------------------|
+|`backlight_toggle()`   |Turn the backlight on or off                 |
+|`backlight_step()`     |Cycle through backlight levels               |
+|`backlight_increase()` |Increase the backlight level                 |
+|`backlight_decrease()` |Decrease the backlight level                 |
+|`backlight_level(x)`   |Sets the backlight level to specified level  |
+|`get_backlight_level()`|Toggle backlight breathing                   |
+
+### Backlight Breathing Functions
+
+|Function  |Description                                               |
+|----------|----------------------------------------------------------|
+|`breathing_toggle()`  |Turn the backlight breathing on or off        |
+|`breathing_enable()`  |Turns on backlight breathing                  |
+|`breathing_disable()` |Turns off backlight breathing                 |

docs/feature_layouts.md

@@ -53,6 +53,8 @@ but the `LAYOUT_<layout>` variable must be defined in `<folder>.h` as well.
 
 ## Tips for Making Layouts Keyboard-Agnostic
 
+### Includes
+
 Instead of using `#include "planck.h"`, you can use this line to include whatever `<keyboard>.h` (`<folder>.h` should not be included here) file that is being compiled:
 
     #include QMK_KEYBOARD_H
@@ -72,3 +74,7 @@ For example:
 ```
 
 Note that the names are lowercase and match the folder/file names for the keyboard/revision exactly.
+
+### Keymaps
+
+In order to support both split and non-split keyboards with the same layout, you need to use the keyboard agnostic `LAYOUT_<layout name>` macro in your keymap. For instance, in order for a Let's Split and Planck to share the same layout file, you need to use `LAYOUT_ortho_4x12` instead of `LAYOUT_planck_grid` or just `{}` for a C array.

docs/feature_rgb_matrix.md

@@ -1,8 +1,12 @@
 # RGB Matrix Lighting
 
+## Driver configuration
+
+### IS31FL3731
+
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
 
-    RGB_MATRIX_ENABLE = yes
+    RGB_MATRIX_ENABLE = IS31FL3731
 
 Configure the hardware via your `config.h`:
 
@@ -36,7 +40,51 @@ Define these arrays listing all the LEDs in your `<keyboard>.c`:
 	    ....
 	}
 
-Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf). The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
+
+###  IS31FL3733
+
+There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
+
+    RGB_MATRIX_ENABLE = IS31FL3733
+
+Configure the hardware via your `config.h`:
+
+	// This is a 7-bit address, that gets left-shifted and bit 0
+	// set to 0 for write, 1 for read (as per I2C protocol)
+	// The address will vary depending on your wiring:
+	// 00 <-> GND
+	// 01 <-> SCL
+	// 10 <-> SDA
+	// 11 <-> VCC
+	// ADDR1 represents A1:A0 of the 7-bit address.
+	// ADDR2 represents A3:A2 of the 7-bit address.
+	// The result is: 0b101(ADDR2)(ADDR1)
+	#define DRIVER_ADDR_1 0b1010000
+	#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+
+	#define DRIVER_COUNT 1
+	#define DRIVER_1_LED_TOTAL 64
+	#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+
+Currently only a single drivers is supported, but it would be trivial to support all 4 combinations. For now define `DRIVER_ADDR_2` as `DRIVER_ADDR_1`
+
+Define these arrays listing all the LEDs in your `<keyboard>.c`:
+
+	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+	/* Refer to IS31 manual for these locations
+	 *   driver
+	 *   |  R location
+	 *   |  |       G location
+	 *   |  |       |       B location
+	 *   |  |       |       | */
+	    {0, B_1,    A_1,    C_1},
+	    ....
+	}
+
+Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
+
+From this point forward the configuration is the same for all the drivers. 
 
 	const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
 	/* {row | col << 4}

docs/hardware_drivers.md

@@ -26,6 +26,10 @@ You can make use of uGFX within QMK to drive character and graphic LCD's, LED ar
 
 Support for WS2811/WS2812{a,b,c} LED's. For more information see the [RGB Light](feature_rgblight.md) page.
 
-## IS31FL3731 (AVR Only)
+## IS31FL3731
 
 Support for up to 2 drivers. Each driver impliments 2 charlieplex matrices to individually address LEDs using I2C. This allows up to 144 same color LEDs or 32 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.
+
+## IS31FL3733
+
+Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.

docs/ref_functions.md

@@ -0,0 +1,48 @@
+# List of Useful Core Functions To Make Your Keyboard Better
+
+There are a lot of hidden functions in QMK that are incredible useful, or may add a bit of functionality that you've been wanting.  Functions that are specific to certain features are not included here, as those will be on their respective feature page. 
+
+## (OLKB) Tri Layers
+
+There are actually separate functions that you can use there, depending on what you're after. 
+
+The first is the `update_tri_layer(x, y, z)` function.   This function check to see if layers `x` and `y` are both on. If they are both on, then it runs on layer `z`.  Otherwise, if both `x` and `y` are not both on (either only one is, or neither is), then it runs off layer `z`. 
+
+This function is useful if you want to create specific keys that have this functionality, but other layer keycodes won't do this. 
+
+The other function is `update_tri_layer_state(state, x, y, z)`.  This function is meant to be called from they [`layer_state_set_*` functions](custom_quantum_functions.md#layer-change-code).  This means that any time that you use a keycode to change the layer, this will be checked.  So you could use `LT(layer, kc)` to change the layer and it will trigger the same layer check. 
+
+The caveat to this method is that you cannot access the `z` layer without having `x` and `y` layers on, since if you try to activate just layer `z`, it will run this code and turn off layer `z` before you could use it. 
+
+## Setting the Persistent Default Layer
+
+Do you want to set the default layer, so that it's retained even after you unplug the board?  If so, this is the function for you. 
+
+To use this, you would use `set_single_persistent_default_layer(layer)`.  If you have a name defined for your layer, you can use that instead (such as _QWERTY, _DVORAK or _COLEMAK). 
+
+This will set the default layer, update the persistent settings, and play a tune if you have [Audio](feature_audio.md) enabled on your board, and the default layer sounds set. 
+
+To configure the default layer sounds, you would want to define this in your `config.h` file, like this: 
+
+```c
+#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                              SONG(COLEMAK_SOUND), \
+                              SONG(DVORAK_SOUND) \
+                            }
+```
+
+
+?> There are a large number of predefined songs in [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h) that you can use.
+
+## Reseting the keyboard
+
+There is the `RESET` quantum keycode that you can use. But if you want to reset the board as part of a macro, rather than hitting a key separately, you can do that. 
+
+And to do so, add `reset_keyboard()` to your function or macro, and this will reset to bootloader.
+
+## Wiping the EEPROM (Persistent Storage)
+
+If you're having issues with Audio, RGB Underglow, backlighting or keys acting weird, then you can reset the EEPROM (persistent setting storage).  Bootmagic is one way to do this, but if that isn't enabled, then you can use a custom macro to do so. 
+
+To wipe the EEPROM, run `eeconfig_init()` from your function or macro to reset most of the settings to default. 
+

drivers/arm/i2c_master.c

@@ -15,12 +15,14 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-/* This library follows the convention of the AVR i2c_master library.
+/* This library is only valid for STM32 processors.
+ * This library follows the convention of the AVR i2c_master library.
  * As a result addresses are expected to be already shifted (addr << 1).
  * I2CD1 is the default driver which corresponds to pins B6 and B7. This
  * can be changed.
  * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
+ * but using any other I2C pins should be trivial.
  */
 
 #include "i2c_master.h"
@@ -41,7 +43,7 @@ static const I2CConfig i2cconfig = {
 
 void i2c_init(void)
 {
-  palSetGroupMode(GPIOB,6,7, PAL_MODE_INPUT);       // Try releasing special pins for a short time
+  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
   chThdSleepMilliseconds(10);
 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
@@ -82,12 +84,12 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l
   {
     complete_packet[i+1] = data[i];
   }
-  complete_packet[0] = regaddr
+  complete_packet[0] = regaddr;
 
   return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
 }
 
-uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_address = devaddr;
   i2cStart(&I2C_DRIVER, &i2cconfig);
@@ -97,7 +99,6 @@ uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t le
 // This is usually not needed. It releases the driver to allow pins to become GPIO again.
 uint8_t i2c_stop(uint16_t timeout)
 {
-  i2c_address = address;
   i2cStop(&I2C_DRIVER);
   return 0;
 }

drivers/arm/i2c_master.h

@@ -35,5 +35,5 @@ uint8_t i2c_start(uint8_t address);
 uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void i2c_stop(void);
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_stop(uint16_t timeout);

drivers/issi/is31fl3731.c

@@ -91,7 +91,7 @@ bool g_led_control_registers_update_required = false;
 // 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
 
 
-void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
 {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
@@ -106,7 +106,7 @@ void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data )
   #endif
 }
 
-void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
 {
     // assumes bank is already selected
 
@@ -135,7 +135,7 @@ void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
     }
 }
 
-void IS31_init( uint8_t addr )
+void IS31FL3731_init( uint8_t addr )
 {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, first enable software shutdown,
@@ -143,10 +143,10 @@ void IS31_init( uint8_t addr )
     // then disable software shutdown.
 
     // select "function register" bank
-    IS31_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
 
     // enable software shutdown
-    IS31_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
+    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
     // this delay was copied from other drivers, might not be needed
     #ifdef __AVR__
     _delay_ms( 10 );
@@ -155,47 +155,47 @@ void IS31_init( uint8_t addr )
     #endif
 
     // picture mode
-    IS31_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
+    IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
     // display frame 0
-    IS31_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
+    IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
     // audio sync off
-    IS31_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
+    IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
 
     // select bank 0
-    IS31_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
 
     // turn off all LEDs in the LED control register
     for ( int i = 0x00; i <= 0x11; i++ )
     {
-        IS31_write_register( addr, i, 0x00 );
+        IS31FL3731_write_register( addr, i, 0x00 );
     }
 
     // turn off all LEDs in the blink control register (not really needed)
     for ( int i = 0x12; i <= 0x23; i++ )
     {
-        IS31_write_register( addr, i, 0x00 );
+        IS31FL3731_write_register( addr, i, 0x00 );
     }
 
     // set PWM on all LEDs to 0
     for ( int i = 0x24; i <= 0xB3; i++ )
     {
-        IS31_write_register( addr, i, 0x00 );
+        IS31FL3731_write_register( addr, i, 0x00 );
     }
 
     // select "function register" bank
-    IS31_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
 
     // disable software shutdown
-    IS31_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
+    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
 
     // select bank 0 and leave it selected.
     // most usage after initialization is just writing PWM buffers in bank 0
     // as there's not much point in double-buffering
-    IS31_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
 
 }
 
-void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
 {
     if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
         is31_led led = g_is31_leds[index];
@@ -208,15 +208,15 @@ void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
     }
 }
 
-void IS31_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
 {
     for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
     {
-        IS31_set_color( i, red, green, blue );
+        IS31FL3731_set_color( i, red, green, blue );
     }
 }
 
-void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
 {
     is31_led led = g_is31_leds[index];
 
@@ -247,24 +247,24 @@ void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool bl
 
 }
 
-void IS31_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
 {
     if ( g_pwm_buffer_update_required )
     {
-        IS31_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        IS31_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+        IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
     }
     g_pwm_buffer_update_required = false;
 }
 
-void IS31_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
 {
     if ( g_led_control_registers_update_required )
     {
         for ( int i=0; i<18; i++ )
         {
-            IS31_write_register(addr1, i, g_led_control_registers[0][i] );
-            IS31_write_register(addr2, i, g_led_control_registers[1][i] );
+            IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
+            IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
         }
     }
 }

drivers/issi/is31fl3731.h

@@ -31,21 +31,21 @@ typedef struct is31_led {
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31_init( uint8_t addr );
-void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3731_init( uint8_t addr );
+void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
 
-void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
 
-void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 
 #define C1_1  0x24
 #define C1_2  0x25

drivers/issi/is31fl3733.c

@@ -0,0 +1,253 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include "is31fl3733.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
+#define ISSI_PAGE_PWM 0x01        //PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
+#define ISSI_PAGE_FUNCTION 0x03   //PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 //PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
+#define ISSI_REG_RESET 0x11// PG3
+#define ISSI_REG_SWPULLUP 0x0F //PG3
+#define ISSI_REG_CSPULLUP 0x10 //PG3
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3733 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
+bool g_led_control_registers_update_required = false;
+
+void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes PG1 is already selected
+
+    // transmit PWM registers in 12 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 192; i += 16 ) {
+        g_twi_transfer_buffer[0] = i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3733_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Unlock the command register.
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG0
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    // Turn off all LEDs.
+    for ( int i = 0x00; i <= 0x17; i++ )
+    {
+        IS31FL3733_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG1
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    // Set PWM on all LEDs to 0
+    // No need to setup Breath registers to PWM as that is the default.
+    for ( int i = 0x00; i <= 0xBF; i++ )
+    {
+        IS31FL3733_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG3
+    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    // Set global current to maximum.
+    IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    // Disable software shutdown.
+    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+
+    // Wait 10ms to ensure the device has woken up.
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+}
+
+void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        g_pwm_buffer[led.driver][led.r] = red;
+        g_pwm_buffer[led.driver][led.g] = green;
+        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31FL3733_set_color( i, red, green, blue );
+    }
+}
+
+void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+  uint8_t control_register_r = led.r / 8;
+  uint8_t control_register_g = led.g / 8;
+  uint8_t control_register_b = led.b / 8;
+  uint8_t bit_r = led.r % 8;
+  uint8_t bit_g = led.g % 8;
+  uint8_t bit_b = led.b % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG1
+        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+
+        IS31FL3733_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        //IS31FL3733_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG0
+        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        for ( int i=0; i<24; i++ )
+        {
+            IS31FL3733_write_register(addr1, i, g_led_control_registers[0][i] );
+            //IS31FL3733_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}
+

drivers/issi/is31fl3733.h

@@ -0,0 +1,255 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3733_DRIVER_H
+#define IS31FL3733_DRIVER_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3733_init( uint8_t addr );
+void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define A_1  0x00
+#define A_2  0x01
+#define A_3  0x02
+#define A_4  0x03
+#define A_5  0x04
+#define A_6  0x05
+#define A_7  0x06
+#define A_8  0x07
+#define A_9  0x08
+#define A_10  0x09
+#define A_11  0x0A
+#define A_12  0x0B
+#define A_13  0x0C
+#define A_14  0x0D
+#define A_15  0x0E
+#define A_16  0x0F
+
+#define B_1  0x10
+#define B_2  0x11
+#define B_3  0x12
+#define B_4  0x13
+#define B_5  0x14
+#define B_6  0x15
+#define B_7  0x16
+#define B_8  0x17
+#define B_9  0x18
+#define B_10  0x19
+#define B_11  0x1A
+#define B_12  0x1B
+#define B_13  0x1C
+#define B_14  0x1D
+#define B_15  0x1E
+#define B_16  0x1F
+
+#define C_1  0x20
+#define C_2  0x21
+#define C_3  0x22
+#define C_4  0x23
+#define C_5  0x24
+#define C_6  0x25
+#define C_7  0x26
+#define C_8  0x27
+#define C_9  0x28
+#define C_10  0x29
+#define C_11  0x2A
+#define C_12  0x2B
+#define C_13  0x2C
+#define C_14  0x2D
+#define C_15  0x2E
+#define C_16  0x2F
+
+#define D_1  0x30
+#define D_2  0x31
+#define D_3  0x32
+#define D_4  0x33
+#define D_5  0x34
+#define D_6  0x35
+#define D_7  0x36
+#define D_8  0x37
+#define D_9  0x38
+#define D_10  0x39
+#define D_11  0x3A
+#define D_12  0x3B
+#define D_13  0x3C
+#define D_14  0x3D
+#define D_15  0x3E
+#define D_16  0x3F
+
+#define E_1  0x40
+#define E_2  0x41
+#define E_3  0x42
+#define E_4  0x43
+#define E_5  0x44
+#define E_6  0x45
+#define E_7  0x46
+#define E_8  0x47
+#define E_9  0x48
+#define E_10  0x49
+#define E_11  0x4A
+#define E_12  0x4B
+#define E_13  0x4C
+#define E_14  0x4D
+#define E_15  0x4E
+#define E_16  0x4F
+
+#define F_1  0x50
+#define F_2  0x51
+#define F_3  0x52
+#define F_4  0x53
+#define F_5  0x54
+#define F_6  0x55
+#define F_7  0x56
+#define F_8  0x57
+#define F_9  0x58
+#define F_10  0x59
+#define F_11  0x5A
+#define F_12  0x5B
+#define F_13  0x5C
+#define F_14  0x5D
+#define F_15  0x5E
+#define F_16  0x5F
+
+#define G_1  0x60
+#define G_2  0x61
+#define G_3  0x62
+#define G_4  0x63
+#define G_5  0x64
+#define G_6  0x65
+#define G_7  0x66
+#define G_8  0x67
+#define G_9  0x68
+#define G_10  0x69
+#define G_11  0x6A
+#define G_12  0x6B
+#define G_13  0x6C
+#define G_14  0x6D
+#define G_15  0x6E
+#define G_16  0x6F
+
+#define H_1  0x70
+#define H_2  0x71
+#define H_3  0x72
+#define H_4  0x73
+#define H_5  0x74
+#define H_6  0x75
+#define H_7  0x76
+#define H_8  0x77
+#define H_9  0x78
+#define H_10  0x79
+#define H_11  0x7A
+#define H_12  0x7B
+#define H_13  0x7C
+#define H_14  0x7D
+#define H_15  0x7E
+#define H_16  0x7F
+
+#define I_1  0x80
+#define I_2  0x81
+#define I_3  0x82
+#define I_4  0x83
+#define I_5  0x84
+#define I_6  0x85
+#define I_7  0x86
+#define I_8  0x87
+#define I_9  0x88
+#define I_10  0x89
+#define I_11  0x8A
+#define I_12  0x8B
+#define I_13  0x8C
+#define I_14  0x8D
+#define I_15  0x8E
+#define I_16  0x8F
+
+#define J_1  0x90
+#define J_2  0x91
+#define J_3  0x92
+#define J_4  0x93
+#define J_5  0x94
+#define J_6  0x95
+#define J_7  0x96
+#define J_8  0x97
+#define J_9  0x98
+#define J_10  0x99
+#define J_11  0x9A
+#define J_12  0x9B
+#define J_13  0x9C
+#define J_14  0x9D
+#define J_15  0x9E
+#define J_16  0x9F
+
+#define K_1  0xA0
+#define K_2  0xA1
+#define K_3  0xA2
+#define K_4  0xA3
+#define K_5  0xA4
+#define K_6  0xA5
+#define K_7  0xA6
+#define K_8  0xA7
+#define K_9  0xA8
+#define K_10  0xA9
+#define K_11  0xAA
+#define K_12  0xAB
+#define K_13  0xAC
+#define K_14  0xAD
+#define K_15  0xAE
+#define K_16  0xAF
+
+#define L_1  0xB0
+#define L_2  0xB1
+#define L_3  0xB2
+#define L_4  0xB3
+#define L_5  0xB4
+#define L_6  0xB5
+#define L_7  0xB6
+#define L_8  0xB7
+#define L_9  0xB8
+#define L_10  0xB9
+#define L_11  0xBA
+#define L_12  0xBB
+#define L_13  0xBC
+#define L_14  0xBD
+#define L_15  0xBE
+#define L_16  0xBF
+
+#endif // IS31FL3733_DRIVER_H

keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c

@@ -0,0 +1,130 @@
+//****************************************************************************//
+// raffle's keymap for the 1up60rgb.                                          //
+//   emulates my pok3r layout and adds RGB control + firmware reset/debug     //
+//   layers                                                                   //
+//****************************************************************************//
+
+//************************ dependencies + definitions ************************//
+#include QMK_KEYBOARD_H
+
+// create names for layers
+enum layers {
+  _typing,
+  _raise,
+  _rgb,
+  _adjust
+};
+
+// define layer mods
+#define RAISE MO(_raise)
+#define RGB MO(_rgb)
+
+// define mod masks for making multi-key macros
+#define MODS_SHIFT_MASK  (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTRL))
+#define MODS_ALT_MASK  (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT))
+
+//********************************** Layers **********************************//
+// define layers
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  // typing layer to handle basic typing
+  [_typing] = LAYOUT_all
+  (
+   KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
+   KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+   KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+   KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
+   RAISE, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, RGB, KC_RCTL
+   ),
+  // raise layer to handle function & nav keys
+  [_raise] = LAYOUT_all
+  (
+   KC_GRV,  KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL,
+   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_LSCR, KC_PAUSE, KC_TRNS,
+   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, KC_DEL, KC_TRNS, KC_TRNS,
+   KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+   ),
+  // rgb layer for pretty backlight colors
+  [_rgb] = LAYOUT_all
+  (
+   RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI, RGB_VAI, RGB_HUD, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, RGB_SAI, RGB_VAD,RGB_SAD, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_RMOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+   ),
+  // adjust to handle firmware debug + reset mode
+  [_adjust] = LAYOUT_all
+  (
+   RESET, DEBUG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+   )
+};
+
+//***************************** Function bodies  *****************************//
+// enable tri-layer state for _raise + _rgb = _adjust
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _raise, _rgb, _adjust);
+}
+
+
+// scan matrix
+void matrix_scan_user(void) {
+}
+
+// support for standard mod state keys (caps lock, scroll lock, etc.)
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+  } else {
+    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}
+
+//*********** Empty fxns from default map that I'm not modifying ***********//
+// onboard macro support
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  ;
+
+  switch (id) {
+
+  }
+  return MACRO_NONE;
+}
+
+// initialize matrix 
+void matrix_init_user(void) {
+}
+
+
+

keyboards/1upkeyboards/1up60rgb/keymaps/raffle/readme.md

@@ -0,0 +1,43 @@
+## raffle's keymap
+The default keymap is just enough to get started. This keymap adds a pok3r-like
+raise layer, backlight RGB control layer, and firmware reset/debug adjust layer
+for ANSI layouts.
+
+In the default layer, the following modifications are made (using standard ANSI
+keys for LHS):
+
+- `CAPS` = `LCTRL`
+- `LCTRL` = `RAISE`
+- `APP` = `RGB`
+- `LCTRL` + `APP` (`RAISE` + `RGB`) = `ADJUST`
+- `GRV` = `ESC`
+
+Additionally, the pok3r's `SHIFT` + `ESC` for `~` is maintained (with either `SHIFT`).
+
+### Raise Layer
+Emulates standard pok3r layout (without the onboard macro keys)
+
+Highlights:
+
+- `IJKL` for arrow keys
+- `H`/`N` for `HOME`/`END`
+- `U`/`P` for `PGUP`/`PGDN`
+- `1` - `=` for `F1` - `F12`
+- `Y` for calculator
+
+Other standard keys from the pok3r layout are carried over. See the keymap or
+the pok3r documentation for details.
+
+### RGB Layer
+Uses navigation keys from `RAISE` layer for RGB adjustment
+
+- `I`/`K` for Value (brightness) Increase/Decrease
+- `U`/`P` for Hue (color) Increase/Decrease
+- `H`/`N` for Saturation Incrase/Decrease
+- `GRV` to toggle RGB on/off
+- `1`-`9` to activate QMK's predefined RGB animations
+
+### Adjust Layer
+
+- `GRV` activates firmware reset for flashing
+- `1` enters debug mode

keyboards/1upkeyboards/readme.md

@@ -0,0 +1,5 @@
+# 1UP Keyboards
+
+Website: [1UP Keyboards](https://www.1upkeyboards.com/)  
+Discord: [Server Invite](https://discordapp.com/invite/c6SYn8)  
+YouTube: [skiwithpete](https://www.youtube.com/user/skiwithpete)  

keyboards/alpha/keymaps/default/keymap.c

@@ -1,32 +1,18 @@
 #include QMK_KEYBOARD_H
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	LAYOUT(
-		KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, 
-		KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TO(1), 
-		KC_Z, KC_X, KC_C, KC_V, MT(MOD_LSFT, KC_SPC), KC_B, KC_N, KC_M),
-
-	LAYOUT(
-		KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, 
-		KC_BSPC, KC_ESC, KC_TAB, KC_SCLN, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(2), 
-		KC_LCTL, KC_LGUI, KC_LALT, TO(0), MT(MOD_LSFT, KC_ENT), KC_COMM, KC_DOT, KC_SLSH),
-
-	LAYOUT(
-		KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, 
-		KC_LSFT, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, TO(3), 
-		RGB_VAI, RGB_VAD, RGB_HUI, TO(0), RGB_MOD, KC_MPLY, KC_VOLD, KC_VOLU),
-
-	LAYOUT(
-		RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
-		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
-		KC_NO, KC_NO, KC_NO, KC_NO, M(0), KC_NO, KC_NO, KC_NO),
+#define HOME 0
+#define MODS 1
+#define MODS2 2
+#define OTHER 3
 
+enum custom_keycodes {
+	MACRO1
 };
 
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {	
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 	if (record->event.pressed) {
 		switch (keycode) {
-			case 0:
+			case MACRO1:
 				SEND_STRING("I'm so sorry... -PyroL");
 				return false;
 		}
@@ -34,43 +20,30 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 	return true;
 };
 
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[HOME] = LAYOUT(
+		KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+		KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TO(1),
+		KC_Z, KC_X, KC_C, KC_V, MT(MOD_LSFT, KC_SPC), KC_B, KC_N, KC_M),
+
+	[MODS] = LAYOUT(
+		KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
+		KC_BSPC, KC_ESC, KC_TAB, KC_SCLN, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(2),
+		KC_LCTL, KC_LGUI, KC_LALT, TO(0), MT(MOD_LSFT, KC_ENT), KC_COMM, KC_DOT, KC_SLSH),
+
+	[MODS2] = LAYOUT(
+		KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+		KC_LSFT, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, TO(3),
+		RGB_VAI, RGB_VAD, RGB_HUI, TO(0), RGB_MOD, KC_MPLY, KC_VOLD, KC_VOLU),
+
+	[OTHER] = LAYOUT(
+		RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+		KC_NO, KC_NO, KC_NO, TO(0), MACRO1, KC_NO, KC_NO, KC_NO),
+};
+
 void matrix_init_user(void) {
 }
 
 void matrix_scan_user(void) {
 }
-
-
-void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-		
-	} else {
-		
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		
-	} else {
-		
-	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		
-	} else {
-		
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-		
-	} else {
-		
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-		
-	} else {
-		
-	}
-
-}

keyboards/alpha/readme.md

@@ -14,4 +14,6 @@ Make example for Alpha (after setting up your build environment):
 
     make alpha:default
 
-See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/faq/build-compile-qmk) for more information.
+See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/faq/build-compile-qmk) for more information.
+
+Please see [PyrooL/Alpha](https://www.github.com/PyrooL/Alpha) for **build instructions**, parts lists, Gerbers, and case files.

keyboards/alt67/alt67.h

@@ -0,0 +1,24 @@
+#pragma once
+
+#include "quantum.h"
+#include "config_led.h"
+#include "matrix.h"
+
+#include "i2c_master.h"
+#include "led_matrix.h" //For led keycodes
+#include "usb/udi_cdc.h"
+#include "usb/usb2422.h"
+
+#define LAYOUT( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \
+    K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30, \
+    K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, \
+    K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K60, \
+    K61, K62, K63, K64, K65, K66, K67 \
+) { \
+    {   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K10,   K11,   K12,   K13,   K14,   K15, }, \
+    {   K16,   K17,   K18,   K19,   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K30, }, \
+    {   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K40,   K41,   K42, KC_NO,   K43,   K44, }, \
+    {   K45, KC_NO,   K46,   K47,   K48,   K49,   K50,   K51,   K52,   K53,   K54,   K55,   K56,   K57,   K58, }, \
+    {   K59,   K60,   K61, KC_NO, KC_NO, KC_NO,   K62, KC_NO, KC_NO, KC_NO,   K63,   K64,   K65,   K66,   K67, }, \
+}

keyboards/alt67/config.h

@@ -0,0 +1,79 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID           0x04D8
+#define PRODUCT_ID          0xEED3
+#define DEVICE_VER          0x0101
+
+#define MANUFACTURER        "Massdrop Inc."
+#define PRODUCT             "ALT67 Keyboard"
+#define SERIAL_NUM          "Unavailable"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define PA 0
+#define PB 1
+
+#define MATRIX_ROW_PORTS PA, PA, PA, PA, PA
+#define MATRIX_ROW_PINS   0,  1,  2,  3,  4
+
+#define MATRIX_COL_PORTS PB, PB, PB, PB, PB, PB, PB, PB, PB, PB, PA, PA, PA, PA, PA
+#define MATRIX_COL_PINS   4,  5,  6,  7,  8,  9, 10, 11, 12, 13,  5,  6,  7, 10, 11
+
+/* Print boot debug codes using debug LED when M28 and M30 shorted */
+#define DEBUG_BOOT_TRACING
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Force boot in NKRO mode */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/alt67/config_led.h

@@ -0,0 +1,178 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _config_led_h_
+#define _config_led_h_
+
+//Define number of ISSI3733 drivers being used (1...16)
+#define ISSI3733_DRIVER_COUNT 2
+
+//Hardware address of each driver (Refer to ISSI3733 pdf "Table 1 Slave Address" and keyboard schematic)
+#define ISSI3773_DRIVER_ADDRESSES { 0xA0, 0xBE }
+
+//LED I2C bus speed
+#define I2C_HZ 580000
+
+//Count of LED bodies
+#define ISSI3733_LED_COUNT 105
+
+//Default Global Current Register value (Default brightness 0 - 255)
+#define ISSI3733_GCR_DEFAULT 128
+
+#define LED_GCR_MAX                 165         //Max GCR value (0 - 255) WARNING: Raising this value may overload the LED drivers and USB bus
+#define LED_GCR_STEP                10          //GCR increment/decrement value
+
+//Automatic power rollback and recovery
+#define V5_HIGH                     2540        //5V high level (After low power detect, point at which LEDs are allowed to use more power )
+#define V5_LOW                      2480        //5V low level (LED power rolled back to stay above this limit)
+#define V5_CAT                      2200        //5V catastrophic level (Host USB port potential to shut down)
+
+#define ANIMATION_SPEED_STEP        1
+
+#define BREATHE_MIN_STEP            0
+#define BREATHE_MAX_STEP            255
+
+//LED Mapping - More practically generated from a spreadsheet program
+//id: ID of the LED (Sync with PCB callouts)
+//x: Physical X coordinate of LED (units do not matter)
+//y: Physical Y coordinate of LED (units do not matter)
+//drv: 1-Based index of ISSI3773_DRIVER_ADDRESSES
+//cs: Matrix wiring CS col (1-16)
+//swr: Matrix wiring SW Red row (1-12)
+//swg: Matrix wiring SW Green row (1-12)
+//swb: Matrix wiring SW Blue row (1-12)
+//scan: Associated key scancode if any
+//Note: Origin 0,0 may be located anywhere as the software will do the final layout
+#define ISSI3733_LED_MAP { \
+ { .id = 1, .x = 0, .y = 0, .adr = { .drv = 2, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 0 }, \
+ { .id = 2, .x = 0.75, .y = 0, .adr = { .drv = 2, .cs = 3, .swr = 5, .swg = 4, .swb = 6 }, .scan = 1 }, \
+ { .id = 3, .x = 1.5, .y = 0, .adr = { .drv = 2, .cs = 4, .swr = 5, .swg = 4, .swb = 6 }, .scan = 2 }, \
+ { .id = 4, .x = 2.25, .y = 0, .adr = { .drv = 2, .cs = 5, .swr = 5, .swg = 4, .swb = 6 }, .scan = 3 }, \
+ { .id = 5, .x = 3, .y = 0, .adr = { .drv = 2, .cs = 6, .swr = 5, .swg = 4, .swb = 6 }, .scan = 4 }, \
+ { .id = 6, .x = 3.75, .y = 0, .adr = { .drv = 2, .cs = 7, .swr = 5, .swg = 4, .swb = 6 }, .scan = 5 }, \
+ { .id = 7, .x = 4.5, .y = 0, .adr = { .drv = 2, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 6 }, \
+ { .id = 8, .x = 5.25, .y = 0, .adr = { .drv = 2, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 7 }, \
+ { .id = 9, .x = 6, .y = 0, .adr = { .drv = 1, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 8 }, \
+ { .id = 10, .x = 6.75, .y = 0, .adr = { .drv = 1, .cs = 2, .swr = 5, .swg = 4, .swb = 6 }, .scan = 9 }, \
+ { .id = 11, .x = 7.5, .y = 0, .adr = { .drv = 1, .cs = 3, .swr = 5, .swg = 4, .swb = 6 }, .scan = 10 }, \
+ { .id = 12, .x = 8.25, .y = 0, .adr = { .drv = 1, .cs = 4, .swr = 5, .swg = 4, .swb = 6 }, .scan = 11 }, \
+ { .id = 13, .x = 9, .y = 0, .adr = { .drv = 1, .cs = 5, .swr = 5, .swg = 4, .swb = 6 }, .scan = 12 }, \
+ { .id = 14, .x = 10.125, .y = 0, .adr = { .drv = 1, .cs = 6, .swr = 5, .swg = 4, .swb = 6 }, .scan = 13 }, \
+ { .id = 15, .x = 11.25, .y = 0, .adr = { .drv = 1, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 14 }, \
+ { .id = 16, .x = 0.188, .y = -0.75, .adr = { .drv = 2, .cs = 2, .swr = 5, .swg = 4, .swb = 6 }, .scan = 15 }, \
+ { .id = 17, .x = 1.125, .y = -0.75, .adr = { .drv = 2, .cs = 3, .swr = 8, .swg = 7, .swb = 9 }, .scan = 16 }, \
+ { .id = 18, .x = 1.875, .y = -0.75, .adr = { .drv = 2, .cs = 4, .swr = 8, .swg = 7, .swb = 9 }, .scan = 17 }, \
+ { .id = 19, .x = 2.625, .y = -0.75, .adr = { .drv = 2, .cs = 5, .swr = 8, .swg = 7, .swb = 9 }, .scan = 18 }, \
+ { .id = 20, .x = 3.375, .y = -0.75, .adr = { .drv = 2, .cs = 6, .swr = 8, .swg = 7, .swb = 9 }, .scan = 19 }, \
+ { .id = 21, .x = 4.125, .y = -0.75, .adr = { .drv = 2, .cs = 7, .swr = 8, .swg = 7, .swb = 9 }, .scan = 20 }, \
+ { .id = 22, .x = 4.875, .y = -0.75, .adr = { .drv = 2, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 21 }, \
+ { .id = 23, .x = 5.625, .y = -0.75, .adr = { .drv = 1, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 22 }, \
+ { .id = 24, .x = 6.375, .y = -0.75, .adr = { .drv = 1, .cs = 2, .swr = 8, .swg = 7, .swb = 9 }, .scan = 23 }, \
+ { .id = 25, .x = 7.125, .y = -0.75, .adr = { .drv = 1, .cs = 3, .swr = 8, .swg = 7, .swb = 9 }, .scan = 24 }, \
+ { .id = 26, .x = 7.875, .y = -0.75, .adr = { .drv = 1, .cs = 4, .swr = 8, .swg = 7, .swb = 9 }, .scan = 25 }, \
+ { .id = 27, .x = 8.625, .y = -0.75, .adr = { .drv = 1, .cs = 5, .swr = 8, .swg = 7, .swb = 9 }, .scan = 26 }, \
+ { .id = 28, .x = 9.375, .y = -0.75, .adr = { .drv = 1, .cs = 11, .swr = 11, .swg = 10, .swb = 12 }, .scan = 27 }, \
+ { .id = 29, .x = 10.313, .y = -0.75, .adr = { .drv = 1, .cs = 6, .swr = 8, .swg = 7, .swb = 9 }, .scan = 28 }, \
+ { .id = 30, .x = 11.25, .y = -0.75, .adr = { .drv = 1, .cs = 7, .swr = 5, .swg = 4, .swb = 6 }, .scan = 29 }, \
+ { .id = 31, .x = 0.281, .y = -1.5, .adr = { .drv = 2, .cs = 2, .swr = 8, .swg = 7, .swb = 9 }, .scan = 30 }, \
+ { .id = 32, .x = 1.313, .y = -1.5, .adr = { .drv = 2, .cs = 3, .swr = 11, .swg = 10, .swb = 12 }, .scan = 31 }, \
+ { .id = 33, .x = 2.063, .y = -1.5, .adr = { .drv = 2, .cs = 4, .swr = 11, .swg = 10, .swb = 12 }, .scan = 32 }, \
+ { .id = 34, .x = 2.813, .y = -1.5, .adr = { .drv = 2, .cs = 5, .swr = 11, .swg = 10, .swb = 12 }, .scan = 33 }, \
+ { .id = 35, .x = 3.563, .y = -1.5, .adr = { .drv = 2, .cs = 6, .swr = 11, .swg = 10, .swb = 12 }, .scan = 34 }, \
+ { .id = 36, .x = 4.313, .y = -1.5, .adr = { .drv = 2, .cs = 7, .swr = 11, .swg = 10, .swb = 12 }, .scan = 35 }, \
+ { .id = 37, .x = 5.063, .y = -1.5, .adr = { .drv = 2, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 36 }, \
+ { .id = 38, .x = 5.813, .y = -1.5, .adr = { .drv = 1, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 37 }, \
+ { .id = 39, .x = 6.563, .y = -1.5, .adr = { .drv = 1, .cs = 2, .swr = 11, .swg = 10, .swb = 12 }, .scan = 38 }, \
+ { .id = 40, .x = 7.313, .y = -1.5, .adr = { .drv = 1, .cs = 3, .swr = 11, .swg = 10, .swb = 12 }, .scan = 39 }, \
+ { .id = 41, .x = 8.063, .y = -1.5, .adr = { .drv = 1, .cs = 4, .swr = 11, .swg = 10, .swb = 12 }, .scan = 40 }, \
+ { .id = 42, .x = 8.813, .y = -1.5, .adr = { .drv = 1, .cs = 5, .swr = 11, .swg = 10, .swb = 12 }, .scan = 41 }, \
+ { .id = 43, .x = 10.031, .y = -1.5, .adr = { .drv = 1, .cs = 6, .swr = 11, .swg = 10, .swb = 12 }, .scan = 43 }, \
+ { .id = 44, .x = 11.25, .y = -1.5, .adr = { .drv = 1, .cs = 7, .swr = 8, .swg = 7, .swb = 9 }, .scan = 44 }, \
+ { .id = 45, .x = 0.469, .y = -2.25, .adr = { .drv = 2, .cs = 2, .swr = 11, .swg = 10, .swb = 12 }, .scan = 45 }, \
+ { .id = 46, .x = 1.688, .y = -2.25, .adr = { .drv = 2, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 47 }, \
+ { .id = 47, .x = 2.438, .y = -2.25, .adr = { .drv = 2, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 48 }, \
+ { .id = 48, .x = 3.188, .y = -2.25, .adr = { .drv = 2, .cs = 9, .swr = 11, .swg = 10, .swb = 12 }, .scan = 49 }, \
+ { .id = 49, .x = 3.938, .y = -2.25, .adr = { .drv = 2, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 50 }, \
+ { .id = 50, .x = 4.688, .y = -2.25, .adr = { .drv = 2, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 51 }, \
+ { .id = 51, .x = 5.438, .y = -2.25, .adr = { .drv = 2, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 52 }, \
+ { .id = 52, .x = 6.188, .y = -2.25, .adr = { .drv = 1, .cs = 9, .swr = 11, .swg = 10, .swb = 12 }, .scan = 53 }, \
+ { .id = 53, .x = 6.938, .y = -2.25, .adr = { .drv = 1, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 54 }, \
+ { .id = 54, .x = 7.688, .y = -2.25, .adr = { .drv = 1, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 55 }, \
+ { .id = 55, .x = 8.438, .y = -2.25, .adr = { .drv = 1, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 56 }, \
+ { .id = 56, .x = 9.469, .y = -2.25, .adr = { .drv = 1, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 57 }, \
+ { .id = 57, .x = 10.5, .y = -2.25, .adr = { .drv = 1, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 58 }, \
+ { .id = 58, .x = 11.25, .y = -2.25, .adr = { .drv = 1, .cs = 7, .swr = 11, .swg = 10, .swb = 12 }, .scan = 59 }, \
+ { .id = 59, .x = 0.094, .y = -3, .adr = { .drv = 2, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 60 }, \
+ { .id = 60, .x = 1.031, .y = -3, .adr = { .drv = 2, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 61 }, \
+ { .id = 61, .x = 1.969, .y = -3, .adr = { .drv = 2, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 62 }, \
+ { .id = 62, .x = 4.781, .y = -3, .adr = { .drv = 2, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 66 }, \
+ { .id = 63, .x = 7.594, .y = -3, .adr = { .drv = 1, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 70 }, \
+ { .id = 64, .x = 8.531, .y = -3, .adr = { .drv = 1, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 71 }, \
+ { .id = 65, .x = 9.75, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 72 }, \
+ { .id = 66, .x = 10.5, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 73 }, \
+ { .id = 67, .x = 11.25, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 74 }, \
+ { .id = 68, .x = -0.338, .y = -3.338, .adr = { .drv = 2, .cs = 11, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 69, .x = 0.39, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 70, .x = 1.263, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 71, .x = 2.135, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 72, .x = 3.008, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 73, .x = 3.88, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 74, .x = 4.753, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 75, .x = 5.625, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 76, .x = 6.497, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 77, .x = 7.37, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 78, .x = 8.242, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 79, .x = 9.115, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 80, .x = 9.987, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 81, .x = 10.86, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 82, .x = 11.588, .y = -3.338, .adr = { .drv = 1, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 83, .x = 11.693, .y = -2.623, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 84, .x = 11.693, .y = -1.873, .adr = { .drv = 1, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 85, .x = 11.693, .y = -1.123, .adr = { .drv = 1, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 86, .x = 11.693, .y = -0.373, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 87, .x = 11.588, .y = 0.338, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 88, .x = 9.908, .y = 0.443, .adr = { .drv = 1, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 89, .x = 9.288, .y = 0.443, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 90, .x = 8.625, .y = 0.443, .adr = { .drv = 1, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 91, .x = 7.875, .y = 0.443, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 92, .x = 7.125, .y = 0.443, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 93, .x = 6.375, .y = 0.443, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 94, .x = 5.625, .y = 0.443, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 95, .x = 4.875, .y = 0.443, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 96, .x = 4.125, .y = 0.443, .adr = { .drv = 2, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 97, .x = 3.375, .y = 0.443, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 98, .x = 2.625, .y = 0.443, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 99, .x = 1.875, .y = 0.443, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 100, .x = 1.125, .y = 0.443, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 101, .x = -0.338, .y = 0.338, .adr = { .drv = 2, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 102, .x = -0.443, .y = -0.373, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 103, .x = -0.443, .y = -1.123, .adr = { .drv = 2, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 104, .x = -0.443, .y = -1.873, .adr = { .drv = 2, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 105, .x = -0.443, .y = -2.623, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+};
+
+
+#define USB_LED_INDICATOR_ENABLE    //Comment out to disable indicator functionality
+#ifdef USB_LED_INDICATOR_ENABLE     //Scan codes refer to actual key matrix codes, not KC_* (255 to disable)
+    #define USB_LED_NUM_LOCK_SCANCODE       255
+    #define USB_LED_CAPS_LOCK_SCANCODE      30
+    #define USB_LED_SCROLL_LOCK_SCANCODE    255
+    #define USB_LED_COMPOSE_SCANCODE        255
+    #define USB_LED_KANA_SCANCODE           255
+#endif //USB_LED_INDICATOR_ENABLE
+
+#endif //_config_led_h_

keyboards/alt67/keymaps/default/keymap.c

@@ -0,0 +1,200 @@
+#include QMK_KEYBOARD_H
+
+enum alt67_keycodes {
+    L_BRI = SAFE_RANGE, //LED Brightness Increase
+    L_BRD,              //LED Brightness Decrease
+    L_PTN,              //LED Pattern Select Next
+    L_PTP,              //LED Pattern Select Previous
+    L_PSI,              //LED Pattern Speed Increase
+    L_PSD,              //LED Pattern Speed Decrease
+    L_T_MD,             //LED Toggle Mode
+    L_T_ONF,            //LED Toggle On / Off
+    L_ON,               //LED On
+    L_OFF,              //LED Off
+    L_T_BR,             //LED Toggle Breath Effect
+    L_T_PTD,            //LED Toggle Scrolling Pattern Direction
+    U_T_AUTO,           //USB Extra Port Toggle Auto Detect / Always Active
+    U_T_AGCR,           //USB Toggle Automatic GCR control
+    DBG_TOG,            //DEBUG Toggle On / Off
+    DBG_MTRX,           //DEBUG Toggle Matrix Prints
+    DBG_KBD,            //DEBUG Toggle Keyboard Prints
+    DBG_MOU,            //DEBUG Toggle Mouse Prints
+};
+
+#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode
+
+keymap_config_t keymap_config;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,  \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP, \
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PGDN, \
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT  \
+    ),
+    [1] = LAYOUT(
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_MUTE, \
+        L_T_BR,  L_PSD,   L_BRI,   L_PSI,   KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, \
+        L_T_PTD, L_PTP,   L_BRD,   L_PTN,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_VOLU, \
+        KC_TRNS, L_T_MD,  L_T_ONF, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_PGUP, KC_VOLD, \
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END  \
+    ),
+    /*
+    [X] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  \
+    ),
+    */
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+};
+
+#define MODS_SHIFT  (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT))
+#define MODS_CTRL  (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL))
+#define MODS_ALT  (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT))
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case L_BRI:
+            if (record->event.pressed) {
+                if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX;
+                else gcr_desired += LED_GCR_STEP;
+                if (led_animation_breathing) gcr_breathe = gcr_desired;
+            }
+            return false;
+        case L_BRD:
+            if (record->event.pressed) {
+                if (LED_GCR_STEP > gcr_desired) gcr_desired = 0;
+                else gcr_desired -= LED_GCR_STEP;
+                if (led_animation_breathing) gcr_breathe = gcr_desired;
+            }
+            return false;
+        case L_PTN:
+            if (record->event.pressed) {
+                if (led_animation_id == led_setups_count - 1) led_animation_id = 0;
+                else led_animation_id++;
+            }
+            return false;
+        case L_PTP:
+            if (record->event.pressed) {
+                if (led_animation_id == 0) led_animation_id = led_setups_count - 1;
+                else led_animation_id--;
+            }
+            return false;
+        case L_PSI:
+            if (record->event.pressed) {
+                led_animation_speed += ANIMATION_SPEED_STEP;
+            }
+            return false;
+        case L_PSD:
+            if (record->event.pressed) {
+                led_animation_speed -= ANIMATION_SPEED_STEP;
+                if (led_animation_speed < 0) led_animation_speed = 0;
+            }
+            return false;
+        case L_T_MD:
+            if (record->event.pressed) {
+                led_lighting_mode++;
+                if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL;
+            }
+            return false;
+        case L_T_ONF:
+            if (record->event.pressed) {
+                led_enabled = !led_enabled;
+                I2C3733_Control_Set(led_enabled);
+            }
+            return false;
+        case L_ON:
+            if (record->event.pressed) {
+                led_enabled = 1;
+                I2C3733_Control_Set(led_enabled);
+            }
+            return false;
+        case L_OFF:
+            if (record->event.pressed) {
+                led_enabled = 0;
+                I2C3733_Control_Set(led_enabled);
+            }
+            return false;
+        case L_T_BR:
+            if (record->event.pressed) {
+                led_animation_breathing = !led_animation_breathing;
+                if (led_animation_breathing)
+                {
+                    gcr_breathe = gcr_desired;
+                    led_animation_breathe_cur = BREATHE_MIN_STEP;
+                    breathe_dir = 1;
+                }
+            }
+            return false;
+        case L_T_PTD:
+            if (record->event.pressed) {
+                led_animation_direction = !led_animation_direction;
+            }
+            return false;
+        case U_T_AUTO:
+            if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+                usb_extra_manual = !usb_extra_manual;
+                CDC_print("USB extra port manual mode ");
+                CDC_print(usb_extra_manual ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case U_T_AGCR:
+            if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+                usb_gcr_auto = !usb_gcr_auto;
+                CDC_print("USB GCR auto mode ");
+                CDC_print(usb_gcr_auto ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case DBG_TOG:
+            if (record->event.pressed) {
+                debug_enable = !debug_enable;
+                CDC_print("Debug mode ");
+                CDC_print(debug_enable ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case DBG_MTRX:
+            if (record->event.pressed) {
+                debug_matrix = !debug_matrix;
+                CDC_print("Debug matrix ");
+                CDC_print(debug_matrix ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case DBG_KBD:
+            if (record->event.pressed) {
+                debug_keyboard = !debug_keyboard;
+                CDC_print("Debug keyboard ");
+                CDC_print(debug_keyboard ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case DBG_MOU:
+            if (record->event.pressed) {
+                debug_mouse = !debug_mouse;
+                CDC_print("Debug mouse ");
+                CDC_print(debug_mouse ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        default:
+            return true; //Process all other keycodes normally
+    }
+}

keyboards/alt67/led_programs.c

@@ -0,0 +1,120 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "alt67.h"
+#include "led_matrix.h"
+
+//Teal <-> Salmon
+led_setup_t leds_teal_salmon[] = {
+    { .hs = 0,  .he = 33,  .rs = 24,  .re = 24,  .gs = 215, .ge = 215, .bs = 204, .be = 204, .ef = EF_NONE },
+    { .hs = 33, .he = 66,  .rs = 24,  .re = 255, .gs = 215, .ge = 114, .bs = 204, .be = 118, .ef = EF_NONE },
+    { .hs = 66, .he = 100, .rs = 255, .re = 255, .gs = 114, .ge = 114, .bs = 118, .be = 118, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Yellow
+led_setup_t leds_yellow[] = {
+    { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Off
+led_setup_t leds_off[] = {
+    { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Red
+led_setup_t leds_red[] = {
+    { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Green
+led_setup_t leds_green[] = {
+    { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Blue
+led_setup_t leds_blue[] = {
+    { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//White
+led_setup_t leds_white[] = {
+    { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//White with moving red stripe
+led_setup_t leds_white_with_red_stripe[] = {
+    { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE },
+    { .hs = 0, .he = 15, .rs = 0, .re = 0, .gs = 0, .ge = 255, .bs = 0, .be = 255, .ef = EF_SCR_R | EF_SUBTRACT },
+    { .hs = 15, .he = 30, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 0, .ef = EF_SCR_R | EF_SUBTRACT },
+    { .end = 1 },
+};
+
+//Black with moving red stripe
+led_setup_t leds_black_with_red_stripe[] = {
+    { .hs = 0, .he = 15, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R },
+    { .hs = 15, .he = 30, .rs = 255, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R },
+    { .end = 1 },
+};
+
+//Rainbow no scrolling
+led_setup_t leds_rainbow_ns[] = {
+    { .hs = 0,      .he = 16.67,  .rs = 255, .re = 255, .gs = 0,   .ge = 255, .bs = 0,   .be = 0,   .ef = EF_OVER },
+    { .hs = 16.67,  .he = 33.33,  .rs = 255, .re = 0,   .gs = 255, .ge = 255, .bs = 0,   .be = 0,   .ef = EF_OVER },
+    { .hs = 33.33,  .he = 50,     .rs = 0,   .re = 0,   .gs = 255, .ge = 255, .bs = 0,   .be = 255, .ef = EF_OVER },
+    { .hs = 50,     .he = 66.67,  .rs = 0,   .re = 0,   .gs = 255, .ge = 0,   .bs = 255, .be = 255, .ef = EF_OVER },
+    { .hs = 66.67,  .he = 83.33,  .rs = 0,   .re = 255, .gs = 0,   .ge = 0,   .bs = 255, .be = 255, .ef = EF_OVER },
+    { .hs = 83.33,  .he = 100,    .rs = 255, .re = 255, .gs = 0,   .ge = 0,   .bs = 255, .be = 0,   .ef = EF_OVER },
+    { .end = 1 },
+};
+
+//Rainbow scrolling
+led_setup_t leds_rainbow_s[] = {
+    { .hs = 0,      .he = 16.67,  .rs = 255, .re = 255, .gs = 0,   .ge = 255, .bs = 0,   .be = 0,   .ef = EF_OVER | EF_SCR_R },
+    { .hs = 16.67,  .he = 33.33,  .rs = 255, .re = 0,   .gs = 255, .ge = 255, .bs = 0,   .be = 0,   .ef = EF_OVER | EF_SCR_R },
+    { .hs = 33.33,  .he = 50,     .rs = 0,   .re = 0,   .gs = 255, .ge = 255, .bs = 0,   .be = 255, .ef = EF_OVER | EF_SCR_R },
+    { .hs = 50,     .he = 66.67,  .rs = 0,   .re = 0,   .gs = 255, .ge = 0,   .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R },
+    { .hs = 66.67,  .he = 83.33,  .rs = 0,   .re = 255, .gs = 0,   .ge = 0,   .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R },
+    { .hs = 83.33,  .he = 100,    .rs = 255, .re = 255, .gs = 0,   .ge = 0,   .bs = 255, .be = 0,   .ef = EF_OVER | EF_SCR_R },
+    { .end = 1 },
+};
+
+//Add new LED animations here using one from above as example
+//The last entry must be { .end = 1 }
+//Add the new animation name to the list below following its format
+
+void *led_setups[] = {
+    leds_rainbow_s,
+    leds_rainbow_ns,
+    leds_teal_salmon,
+    leds_yellow,
+    leds_red,
+    leds_green,
+    leds_blue,
+    leds_white,
+    leds_white_with_red_stripe,
+    leds_black_with_red_stripe,
+    leds_off
+};
+
+const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]);

keyboards/alt67/matrix.c

@@ -0,0 +1,182 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "alt67.h"
+
+#include "d51_util.h"
+#include "debug.h"
+#include "clks.h"
+#include <string.h>
+
+matrix_row_t mlatest[MATRIX_ROWS];
+matrix_row_t mlast[MATRIX_ROWS];
+matrix_row_t mdebounced[MATRIX_ROWS];
+
+uint8_t row_ports[] = { MATRIX_ROW_PORTS };
+uint8_t row_pins[] = { MATRIX_ROW_PINS };
+uint8_t col_ports[] = { MATRIX_COL_PORTS };
+uint8_t col_pins[] = { MATRIX_COL_PINS };
+uint32_t row_masks[2]; //NOTE: If more than PA PB used in the future, adjust code to accomodate
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void matrix_init(void)
+{
+    memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(mlast, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(mdebounced, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+
+    row_masks[PA] = 0;
+    row_masks[PB] = 0;
+
+    uint8_t row;
+    for (row = 0; row < MATRIX_ROWS; row++)
+    {
+        PORT->Group[row_ports[row]].DIRCLR.reg = 1 << row_pins[row]; //Input
+        PORT->Group[row_ports[row]].OUTCLR.reg = 1 << row_pins[row]; //Low
+        PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.INEN = 1; //Input Enable,
+        PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.PULLEN = 1; //Pull Enable
+        row_masks[row_ports[row]] |= 1 << row_pins[row]; //Add pin to proper row mask
+    }
+
+    uint8_t col;
+    for (col = 0; col < MATRIX_COLS; col++)
+    {
+        PORT->Group[col_ports[col]].DIRSET.reg = 1 << col_pins[col]; //Output
+        PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Low
+    }
+    
+    matrix_init_quantum();
+}
+
+#define MATRIX_SCAN_DELAY 10   //Delay after setting a col to output (in us)
+
+uint64_t mdebouncing = 0;
+uint8_t matrix_scan(void)
+{
+    uint8_t mchanged;
+    uint8_t row;
+    uint8_t col;
+    uint32_t scans[2]; //PA PB
+
+    if (CLK_get_ms() < mdebouncing) return 1; //mdebouncing == 0 when no debouncing active
+
+    //m15_off; //Profiling scans
+
+    memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); //Zero the result buffer
+
+    for (col = 0; col < MATRIX_COLS; col++)
+    {
+        PORT->Group[col_ports[col]].OUTSET.reg = 1 << col_pins[col]; //Set col output
+
+        CLK_delay_us(MATRIX_SCAN_DELAY); //Delay for output
+
+        scans[PA] = PORT->Group[PA].IN.reg & row_masks[PA]; //Read PA row pins data
+        scans[PB] = PORT->Group[PB].IN.reg & row_masks[PB]; //Read PB row pins data
+
+        PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Clear col output
+
+        for (row = 0; row < MATRIX_ROWS; row++)
+        {
+            //Move scan bits from scans array into proper row bit locations
+            if (scans[row_ports[row]] & (1 << row_pins[row]))
+                mlatest[row] |= 1 << col;
+        }
+    }
+
+    mchanged = 0; //Default to no matrix change since last
+
+    for (row = 0; row < MATRIX_ROWS; row++)
+    {
+        if (mlast[row] != mlatest[row])
+            mchanged = 1;
+        mlast[row] = mlatest[row];
+    }
+
+    if (!mchanged)
+    {
+        for (row = 0; row < MATRIX_ROWS; row++)
+            mdebounced[row] = mlatest[row];
+        mdebouncing = 0;
+    }
+    else
+    {
+        //Begin or extend debounce on change
+        mdebouncing = CLK_get_ms() + DEBOUNCING_DELAY;
+    }
+
+    //m15_on; //Profiling scans
+
+    matrix_scan_quantum();
+
+    return 1;
+}
+
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return mdebounced[row];
+}
+
+void matrix_print(void)
+{
+    char buf[(MATRIX_COLS+8)*(MATRIX_ROWS+1)] = "R C";
+    char *pbuf = buf+3;
+    uint32_t cols;
+    uint32_t rows;
+    matrix_row_t row;
+
+    for (cols = 1; cols <= MATRIX_COLS; cols++)
+    {
+        *pbuf = (cols%10)+48;
+        pbuf++;
+    }
+    *pbuf = '\r'; pbuf++;
+    *pbuf = '\n'; pbuf++;
+
+    for (rows = 1; rows <= MATRIX_ROWS; rows++)
+    {
+        row = matrix_get_row(rows-1);
+        if (rows < 10) { *pbuf = rows+48; pbuf++; *pbuf = ' '; pbuf++; *pbuf = ' '; pbuf++; }
+        else { *pbuf = (rows/10)+48; pbuf++; *pbuf = (rows%10)+48; pbuf++; *pbuf = ' '; pbuf++; }
+        for (cols = 0; cols < MATRIX_COLS; cols++)
+        {
+            if (row & 1 << cols) *pbuf = 'X';
+            else                 *pbuf = '.';
+            pbuf++;
+        }
+        *pbuf = '\r'; pbuf++;
+        *pbuf = '\n'; pbuf++;
+    }
+    *pbuf = 0;
+    dprint(buf);
+}

keyboards/alt67/matrix.h

@@ -0,0 +1,77 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef MATRIX_H
+#define MATRIX_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "keyboard.h"
+
+#if (MATRIX_COLS <= 8)
+typedef  uint8_t    matrix_row_t;
+#elif (MATRIX_COLS <= 16)
+typedef  uint16_t   matrix_row_t;
+#elif (MATRIX_COLS <= 32)
+typedef  uint32_t   matrix_row_t;
+#else
+#error "MATRIX_COLS: invalid value"
+#endif
+
+#define MATRIX_IS_ON(row, col)  (matrix_get_row(row) && (1<<col))
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* number of matrix rows */
+uint8_t matrix_rows(void);
+/* number of matrix columns */
+uint8_t matrix_cols(void);
+/* should be called at early stage of startup before matrix_init.(optional) */
+void matrix_setup(void);
+/* intialize matrix for scaning. */
+void matrix_init(void);
+/* scan all key states on matrix */
+uint8_t matrix_scan(void);
+/* whether modified from previous scan. used after matrix_scan. */
+bool matrix_is_modified(void) __attribute__ ((deprecated));
+/* whether a switch is on */
+bool matrix_is_on(uint8_t row, uint8_t col);
+/* matrix state on row */
+matrix_row_t matrix_get_row(uint8_t row);
+/* print matrix for debug */
+void matrix_print(void);
+
+/* power control */
+void matrix_power_up(void);
+void matrix_power_down(void);
+
+/* executes code for Quantum */
+void matrix_init_quantum(void);
+void matrix_scan_quantum(void);
+
+void matrix_init_kb(void);
+void matrix_scan_kb(void);
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

keyboards/alt67/readme.md

@@ -0,0 +1,15 @@
+# ALT
+
+![ALT](https://massdrop-s3.imgix.net/product-images/alt-keyboard/FP/WNxwR19gTua3nxiiQWP3_AI7B3311%20copy%20page.jpg?auto=format&fm=jpg&fit=max&w=700&h=467&dpr=1&q=80)
+
+The Massdrop ALT is a 65% mechanical keyboard featuring dual USB-C connectors, an integrated Hi-Speed USB 2.0 hub, and fully customizable RGB backlighting and underlighting.
+
+Keyboard Maintainer: [Massdrop](https://github.com/massdrop)  
+Hardware Supported: Massdrop, Inc. ALT67 PCBs utilizing Microchip's ATSAMD51J18A MCU and USB2422 2-Port USB 2.0 Hi-Speed Hub Controller, and ISSI's IS31FL3733 LED Drivers.  
+Hardware Availability: [Massdrop ALT Mechanical Keyboard](https://www.massdrop.com/buy/massdrop-alt-mechanical-keyboard)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alt67:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/alt67/rules.mk

@@ -0,0 +1,32 @@
+# project specific files
+SRC = led_programs.c
+SRC += matrix.c
+
+#For platform and packs
+ARM_ATSAM = SAMD51J18A
+MCU = cortex-m4
+
+CUSTOM_MATRIX = yes
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+VIRTSER_ENABLE = no         # USB Serial Driver
+RAW_ENABLE = no             # Raw device

keyboards/at101_blackheart/at101_blackheart.c

@@ -0,0 +1 @@
+#include "at101_blackheart.h"

keyboards/at101_blackheart/at101_blackheart.h

@@ -0,0 +1,28 @@
+#ifndef at101_blackheart_H
+#define at101_blackheart_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K0000, K0100, K0001, K0101, K0002, K0102, K0003, K0103, K0004, K0104, K0005, K0105, K0006, 			K0106, K0007, K0107, \
+	K0200, K0300, K0201, K0301, K0202, K0302, K0203, K0303, K0204, K0304, K0205, K0305, K0206, K0306, 	K0207, K0307, K0208, 	K0308, K0209, K0309, K0009, \
+	K0400, K0500, K0401, K0501, K0402, K0502, K0403, K0503, K0404, K0504, K0405, K0505, K0406, K0506, 	K0407, K0507, K0408, 	K0508, K0409, K0509, K0109, \
+	K0600, K0700, K0601, K0701, K0602, K0702, K0603, K0703, K0604, K0704, K0605, K0705, K0606,        							K0608, K0708, K0609, K0709, \
+	K0800, K1101, K0900, K0801, K0901, K0802, K0902, K0803, K0903, K0804, K0904, K0805, K0905, K0806, 		   K0807, 			K0808, K0908, K0809, K0909, \
+	K1000, K1100, K1001,  			   K1102,                     		  K1005, K1105, K1006, K1106, 	K1007, K1107, K1008, 		K1108, 	  K1009 \
+) { \
+	{ K0000, K0001, K0002, K0003, K0004, K0005, K0006, K0007, KC_NO, K0009 }, \
+	{ K0100, K0101, K0102, K0103, K0104, K0105, K0106, K0107, KC_NO, K0109 }, \
+	{ K0200, K0201, K0202, K0203, K0204, K0205, K0206, K0207, K0208, K0209 }, \
+	{ K0300, K0301, K0302, K0303, K0304, K0305, K0306, K0307, K0308, K0309 }, \
+	{ K0400, K0401, K0402, K0403, K0404, K0405, K0406, K0407, K0408, K0409 }, \
+	{ K0500, K0501, K0502, K0503, K0504, K0505, K0506, K0507, K0508, K0509 }, \
+	{ K0600, K0601, K0602, K0603, K0604, K0605, K0606, KC_NO, K0608, K0609 }, \
+	{ K0700, K0701, K0702, K0703, K0704, K0705, KC_NO, KC_NO, K0708, K0709 }, \
+	{ K0800, K0801, K0802, K0803, K0804, K0805, K0806, K0807, K0808, K0809 }, \
+	{ K0900, K0901, K0902, K0903, K0904, K0905, KC_NO, KC_NO, K0908, K0909 }, \
+	{ K1000, K1001, KC_NO, KC_NO, KC_NO, K1005, K1006, K1007, K1008, K1009 }, \
+	{ K1100, K1101, K1102, KC_NO, KC_NO, K1105, K1106, K1107, K1108, KC_NO }  \
+}
+
+#endif

keyboards/at101_blackheart/config.h

@@ -0,0 +1,43 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    blindassassin111
+#define PRODUCT         AT101_Blackheart PCB
+#define DESCRIPTION     Replacement AT101 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 10
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F0, F1, F4, D4, F6, F5, F7, B6, B5, D5, C7, C6 }
+#define MATRIX_COL_PINS { D1, D0, B7, B3, B2, B1, B0, E6, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* force n-key rollover*/
+#define FORCE_NKRO
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS

keyboards/at101_blackheart/keymaps/default/keymap.c

@@ -0,0 +1,53 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, 				KC_PSCR,KC_SLCK, KC_PAUS,
+		KC_GRV, KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,  KC_0,   KC_MINS,KC_EQL, KC_BSPC,		KC_INS, KC_HOME, KC_PGUP, 		KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+		KC_TAB, KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,   KC_LBRC,KC_RBRC,KC_BSLS, 	KC_DEL, KC_END,  KC_PGDN, 		KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+		KC_CAPS,KC_A,  KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K, 	KC_L,  KC_SCLN,KC_QUOT,KC_ENT, 												KC_P4, 	 KC_P5,   KC_P6,   KC_PEQL,
+		KC_LSFT,KC_BSLS,KC_Z, KC_X,  KC_C,  KC_V,  KC_B,  KC_N,  KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_LSFT,MO(1), 				KC_UP, 					KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+		KC_LCTL,KC_LGUI,KC_LALT, 			KC_SPC,				 		KC_RALT, KC_RGUI,KC_MENU, KC_RCTL,			KC_LEFT,KC_DOWN, KC_RGHT,			KC_P0,		  KC_PDOT),
+
+	LAYOUT(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 			KC_TRNS, KC_TRNS, KC_TRNS, 			  
+		RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 					 						KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 			 KC_TRNS, 				KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, 					 KC_TRNS, 							 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS,			KC_TRNS, 	  KC_TRNS),
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  DDRB |= (1 << 4);
+  DDRD |= (1 << 6) | (1 << 7);
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+    PORTD |= (1 << 7);
+  } else {
+    PORTD &= ~(1 << 7);
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    PORTB |= (1 << 4);
+  } else {
+    PORTB &= ~(1 << 4);
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+    PORTD |= (1 << 6);
+  } else {
+    PORTD &= ~(1 << 6);
+  }
+}

keyboards/at101_blackheart/readme.md

@@ -0,0 +1,14 @@
+AT101 Blackheart PCB
+===
+
+A replacement PCB for AT101 keyboards.
+
+Keyboard Maintainer: QMK Community and blindassassin111  
+Hardware Supported: AT101 blackheart PCB  
+Hardware Availability: https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html
+
+Make example for this keyboard (after setting up your build environment):
+
+    make at101_blackheart:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/at101_blackheart/rules.mk

@@ -0,0 +1,59 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+BOOTLOADER = halfkay
+
+# Boot Section Size in *bytes*
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/converter/usb_usb/README.md

@@ -3,8 +3,8 @@ USB to USB keyboard protocol converter
 A small device to connect between your USB keyboard and your PC that makes (almost) every keyboard fully programmable.
 Original code from the [TMK firmware](https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb). Ported to QMK by [Balz Guenat](https://github.com/BalzGuenat).
 
-Keyboard Maintainer: [Balz Guenat](https://github.com/BalzGuenat)
-Hardware Supported: [Hasu's USB-USB converter](https://geekhack.org/index.php?topic=69169.0), [Pro Micro + USB Host Shield](https://geekhack.org/index.php?topic=80421.0), maybe more
+Keyboard Maintainer: [Balz Guenat](https://github.com/BalzGuenat)  
+Hardware Supported: [Hasu's USB-USB converter](https://geekhack.org/index.php?topic=69169.0), [Pro Micro + USB Host Shield](https://geekhack.org/index.php?topic=80421.0), maybe more  
 Hardware Availability: [GH thread](https://geekhack.org/index.php?topic=72052.0), self-built
 
 Make example for this keyboard (after setting up your build environment):

keyboards/cospad/cospad.h

@@ -22,6 +22,21 @@
    * `-------------------'
  */
 
+/* COSPAD gamepad matrix layout
+   * ,-------------------.
+   * | 00 | 01 | 02 | 03 |
+   * |----|----|----|----|
+   * | 10 | 11 | 12 | 13 |
+   * |----|----|----|----|
+   * | 20 | 21 | 22 |    |
+   * |----|----|----| 23 |
+   * | 30 | 31 | 32 |    |
+   * |----|----|----|----|
+   * | 40 | 41 | 42 | 43 |
+   * |----|----|----|----|
+   * | 50 | 51 | 52 | 53 |
+   * `-------------------'
+ */
 
 /* COSPAD numpad matrix layout
    * ,-------------------.
@@ -41,7 +56,7 @@
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
 #define LAYOUT_ortho_6x4( \
-  k00, k01, k02, k03, \
+	k00, k01, k02, k03, \
 	k10, k11, k12, k13, \
 	k20, k21, k22, k23, \
 	k30, k31, k32, k33, \
@@ -57,8 +72,25 @@
 	{k50, k51, k52, k53}  \
 }
 
+#define LAYOUT_gamepad_6x4( \
+	k00, k01, k02, k03, \
+	k10, k11, k12, k13, \
+	k20, k21, k22,      \
+	k30, k31, k32, k23, \
+	k40, k41, k42, k43, \
+	k50, k51, k52, k53  \
+) \
+{ \
+	{k00, k01, k02, k03},   \
+	{k10, k11, k12, k13},   \
+	{k20, k21, k22, k23},   \
+	{k30, k31, k32, KC_NO}, \
+	{k40, k41, k42, k43},   \
+	{k50, k51, k52, k53}    \
+}
+
 #define LAYOUT_numpad_6x4( \
-  k00, k01, k02, k03,  \
+	k00, k01, k02, k03,  \
 	k10, k11, k12, k13,  \
 	k20, k21, k22,       \
 	k30, k31, k32, k23,  \

keyboards/cospad/keymaps/detrus/keymap.c

@@ -0,0 +1,369 @@
+#include QMK_KEYBOARD_H
+#include "led.h"
+#include <print.h>
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+enum cospad_layers {
+	_QWERTY_LAYER,
+	_QWERTZ_LAYER,
+	_COLEMA_LAYER,
+	_DVORAK_LAYER,
+	_QWERTY_LOWER_LAYER,
+	_QWERTZ_LOWER_LAYER,
+	_COLEMA_LOWER_LAYER,
+	_DVORAK_LOWER_LAYER,
+	_RAISE_LAYER,
+	_ALTER_LAYER,
+};
+
+// To switch the default layer used for the layout, there are special keycodes.
+// Which onces detected below serve to switch it.
+enum cospad_keycodes {
+	QWERTY = SAFE_RANGE,
+	QWERTZ,
+	COLEMAK,
+	DVORAK
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	/* Keymap _QWERTY_LAYER: Default layer
+	 * ,-----------------------.
+	 * |  T  |  G  |  B  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  R  |  F  |  V  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  E  |  D  |  C  |     |
+	 * |-----|-----|-----| Spc |
+	 * |  W  |  S  |  X  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Q  |  A  |  Z  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 *
+	 *   And it's LOWER layer
+	 * ,-----------------------.
+	 * |  P  |  ;  |  /  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  O  |  L  |  .  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  I  |  K  |  ,  |     |
+	 * |-----|-----|-----| Ent |
+	 * |  U  |  J  |  M  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Y  |  H  |  N  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_QWERTY_LAYER] = LAYOUT_gamepad_6x4(
+			KC_T,    KC_G,    KC_B,    KC_LALT,  \
+			KC_R,    KC_F,    KC_V,    MO(_QWERTY_LOWER_LAYER),\
+			KC_E,    KC_D,    KC_C,              \
+			KC_W,    KC_S,    KC_X,    KC_SPACE, \
+			KC_Q,    KC_A,    KC_Z,    MO(_RAISE_LAYER),\
+			KC_GESC, KC_TAB,  KC_LSFT, KC_LCTRL),
+	[_QWERTY_LOWER_LAYER] = LAYOUT_gamepad_6x4(
+			KC_P,    KC_SCLN, KC_SLSH, KC_LALT,  \
+			KC_O,    KC_L,    KC_DOT,  _______,  \
+			KC_I,    KC_K,    KC_COMM,           \
+			KC_U,    KC_J,    KC_M,    KC_ENTER, \
+			KC_Y,    KC_H,    KC_N,    _______,  \
+			_______, _______,  _______, _______),
+
+
+
+	/* Keymap _QWERTZ_LAYER: Alternate default layer
+	 * ,-----------------------.
+	 * |  T  |  G  |  B  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  R  |  F  |  V  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  E  |  D  |  C  |     |
+	 * |-----|-----|-----| Spc |
+	 * |  W  |  S  |  X  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Q  |  A  |  Y  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 *
+	 *   And it's LOWER layer
+	 * ,-----------------------.
+	 * |  P  |  ;  |  /  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  O  |  L  |  >  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  I  |  K  |  <  |     |
+	 * |-----|-----|-----| Ent |
+	 * |  U  |  J  |  M  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Z  |  H  |  N  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_QWERTZ_LAYER] = LAYOUT_gamepad_6x4(
+			KC_T,    KC_G,    KC_B,    KC_LALT,  \
+			KC_R,    KC_F,    KC_V,    MO(_QWERTZ_LOWER_LAYER),\
+			KC_E,    KC_D,    KC_C,              \
+			KC_W,    KC_S,    KC_X,    KC_SPACE, \
+			KC_Q,    KC_A,    KC_Y,    MO(_RAISE_LAYER),\
+			KC_GESC, KC_TAB,  KC_LSFT, KC_LCTRL),
+	[_QWERTZ_LOWER_LAYER] = LAYOUT_gamepad_6x4(
+			KC_P,    KC_SCLN, KC_SLSH, KC_LALT,  \
+			KC_O,    KC_L,    KC_DOT,  _______,  \
+			KC_I,    KC_K,    KC_COMM,           \
+			KC_U,    KC_J,    KC_M,    KC_ENTER, \
+			KC_Z,    KC_H,    KC_N,    _______,  \
+			_______, _______, _______, _______),
+
+
+
+	/* Keymap _COLEMA_LAYER: Alternate default layer
+	 * ,-----------------------.
+	 * |  G  |  D  |  B  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  P  |  T  |  V  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  F  |  S  |  C  |     |
+	 * |-----|-----|-----| Spc |
+	 * |  W  |  R  |  X  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Q  |  A  |  Z  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 *
+	 *   And it's LOWER layer
+	 * ,-----------------------.
+	 * |  ;  |  O  |  /  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  Y  |  I  |  .  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  U  |  E  |  ,  |     |
+	 * |-----|-----|-----| Ent |
+	 * |  L  |  N  |  M  |     |
+	 * |-----|-----|-----|-----|
+	 * |  J  |  H  |  K  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_COLEMA_LAYER] = LAYOUT_gamepad_6x4(
+			KC_T,    KC_D,     KC_B,    KC_LALT,  \
+			KC_R,    KC_T,     KC_V,    MO(_COLEMA_LOWER_LAYER),\
+			KC_E,    KC_S,     KC_C,              \
+			KC_W,    KC_R,     KC_X,    KC_SPACE, \
+			KC_Q,    KC_A,     KC_Z,    MO(_RAISE_LAYER),\
+			KC_GESC, KC_TAB,   KC_LSFT, KC_LCTRL),
+	[_COLEMA_LOWER_LAYER] = LAYOUT_gamepad_6x4(
+			KC_SCLN, KC_O,     KC_SLSH, _______,  \
+			KC_Y,    KC_I,     KC_DOT,  _______,  \
+			KC_U,    KC_E,     KC_COMM,           \
+			KC_L,    KC_N,     KC_M,    KC_ENTER, \
+			KC_J,    KC_H,     KC_K,    _______,  \
+			KC_F,    KC_G,     _______, _______),
+
+
+
+	/* Keymap _DVORAK_LAYER: Alternate default layer
+	 * ,-----------------------.
+	 * |  Y  |  I  |  X  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  P  |  U  |  K  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  .  |  E  |  J  |     |
+	 * |-----|-----|-----| Spc |
+	 * |  ,  |  O  |  Q  |     |
+	 * |-----|-----|-----|-----|
+	 * |  '  |  A  |  ;  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 *
+	 *   And it's LOWER layer
+	 * ,-----------------------.
+	 * |  L  |  S  |  Z  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  R  |  N  |  V  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  C  |  T  |  W  |     |
+	 * |-----|-----|-----| Ent |
+	 * |  G  |  H  |  M  |     |
+	 * |-----|-----|-----|-----|
+	 * |  F  |  D  |  B  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_DVORAK_LAYER] = LAYOUT_gamepad_6x4(
+			KC_Y,    KC_I,    KC_X,    KC_LALT,   \
+			KC_P,    KC_U,    KC_K,    MO(_DVORAK_LOWER_LAYER),\
+			KC_DOT,  KC_E,    KC_J,               \
+			KC_COMM, KC_O,    KC_A,    KC_SPACE,  \
+			KC_QUOT, KC_A,    KC_SCLN, MO(_RAISE_LAYER),\
+			KC_GESC, KC_TAB,  KC_LSFT, KC_LCTRL),
+	[_DVORAK_LOWER_LAYER] = LAYOUT_gamepad_6x4(
+			KC_L,    KC_S,    KC_Z,    KC_LALT, \
+			KC_R,    KC_N,    KC_V,    _______, \
+			KC_C,    KC_T,    KC_W,             \
+			KC_G,    KC_H,    KC_M,    KC_ENTER,\
+			KC_F,    KC_D,    KC_B,    _______, \
+			_______, _______, _______, _______),
+
+
+
+	/* Keymap _RAISE_LAYER: Additional layer to access more
+	 * ,-----------------------.
+	 * |  5  |  0  | del | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  4  |  9  | ->  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  3  |  8  |  <- |     |
+	 * |-----|-----|-----| Spc |
+	 * |  2  |  7  | ->  |     |
+	 * |-----|-----|-----|-----|
+	 * |  1  |  6  |  <- | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_RAISE_LAYER] = LAYOUT_gamepad_6x4(
+			KC_5,    KC_0,   KC_BSPC,  _______, \
+			KC_4,    KC_9,   KC_RIGHT, _______, \
+			KC_3,    KC_8,   KC_UP,             \
+			KC_2,    KC_7,   KC_DOWN,  _______, \
+			KC_1,    KC_6,   KC_LEFT,  _______, \
+			_______, _______, _______, _______),
+
+
+
+	/* Keymap _ALTER_LAYER: Function layer used to control the Leds
+	 *                     and use media buttons
+	 * ,----------------------------------------.
+	 * | Val Dec | Bl Toggle  | Qwertz  | Super |
+	 * |---------|------------|---------|-------|
+	 * | Val Inc |   Bl Off   | Qwerty  |       |
+	 * |---------|------------|---------|-------|
+	 * | Sat Dec |   Bl On    | Colemak |       |
+	 * |---------|------------|---------|       |
+	 * | Sat Inc | RGB Toggle | Dvorak  |       |
+	 * |---------|------------|---------|-------|
+	 * | Hue Dec |  RGB Next  | Vol Dwn |       |
+	 * |---------|------------|---------|-------|
+	 * | Hue Inc |  RGB Prev  | Vol Up  | Reset |
+	 * `----------------------------------------'
+	 */
+	[_ALTER_LAYER] = LAYOUT_gamepad_6x4(
+			RGB_VAD, BL_TOGG,  QWERTZ,  KC_LGUI, \
+			RGB_VAI, BL_OFF,   QWERTY,  _______, \
+			RGB_SAD, BL_ON,    COLEMAK,          \
+			RGB_SAI, RGB_TOG,  DVORAK,  _______, \
+			RGB_HUD, RGB_MOD,  KC_VOLD, _______, \
+			RGB_HUI, RGB_RMOD, KC_VOLU, RESET),
+};
+
+// Makes sure to update the good tri-layer if a layer changes
+uint32_t layer_state_set_user(uint32_t state) {
+	switch (biton32(default_layer_state)) {
+		case _QWERTY_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER);
+			break;
+		case _QWERTZ_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER);
+			break;
+		case _COLEMA_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER);
+			break;
+		case _DVORAK_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER);
+			break;
+	}
+	return state;
+}
+
+// Makes the tri-layer
+uint32_t default_layer_state_set_kb(uint32_t state) {
+	switch (biton32(state)) {
+		case _QWERTY_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER);
+			layer_move(_QWERTY_LAYER);
+			break;
+		case _QWERTZ_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER);
+			layer_move(_QWERTZ_LAYER);
+			break;
+		case _COLEMA_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER);
+			layer_move(_COLEMA_LAYER);
+			break;
+		case _DVORAK_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER);
+			layer_move(_DVORAK_LAYER);
+			break;
+	}
+	return state;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	switch (keycode) {
+		case BL_TOGG:
+			if (record->event.pressed) {
+				cospad_bl_led_togg();
+			}
+			return false;
+		case BL_ON:
+			if (record->event.pressed) {
+				cospad_bl_led_on();
+			}
+			return false;
+		case BL_OFF:
+			if (record->event.pressed) {
+				cospad_bl_led_off();
+			}
+			return false;
+		case QWERTY:
+			if (record->event.pressed) {
+				set_single_persistent_default_layer(_QWERTY_LAYER);
+				print("switched to QWERTY layout\n");
+			}
+			return false;
+			break;
+		case QWERTZ:
+			if (record->event.pressed) {
+				set_single_persistent_default_layer(_QWERTZ_LAYER);
+			}
+			return false;
+			break;
+		case COLEMAK:
+			if (record->event.pressed) {
+				set_single_persistent_default_layer(_COLEMA_LAYER);
+			}
+			return false;
+			break;
+		case DVORAK:
+			if (record->event.pressed) {
+				set_single_persistent_default_layer(_DVORAK_LAYER);
+			}
+			return false;
+			break;
+		default:
+			return true;
+	}
+}

keyboards/ctrl/config.h

@@ -0,0 +1,79 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID           0x04D8
+#define PRODUCT_ID          0xEED2
+#define DEVICE_VER          0x0101
+
+#define MANUFACTURER        "Massdrop Inc."
+#define PRODUCT             "CTRL Keyboard"
+#define SERIAL_NUM          "Unavailable"
+
+/* key matrix size */
+#define MATRIX_ROWS 11
+#define MATRIX_COLS 8
+
+#define PA 0
+#define PB 1
+
+#define MATRIX_ROW_PORTS PB, PB, PB, PB, PB, PB, PA, PA, PB, PB, PB
+#define MATRIX_ROW_PINS   4,  5,  6,  7,  8,  9, 10, 11, 10, 11, 12
+
+#define MATRIX_COL_PORTS PA, PA, PA, PA, PA, PA, PA, PA
+#define MATRIX_COL_PINS   0,  1,  2,  3,  4,  5,  6,  7
+
+/* Print boot debug codes using debug LED when M28 and M30 shorted */
+#define DEBUG_BOOT_TRACING
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Force boot in NKRO mode */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/ctrl/config_led.h

@@ -0,0 +1,191 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _config_led_h_
+#define _config_led_h_
+
+//Define number of ISSI3733 drivers being used (1...16)
+#define ISSI3733_DRIVER_COUNT 2
+
+//Hardware address of each driver (Refer to ISSI3733 pdf "Table 1 Slave Address" and keyboard schematic)
+#define ISSI3773_DRIVER_ADDRESSES { 0xA0, 0xBE }
+
+//LED I2C bus speed
+#define I2C_HZ 580000
+
+//Count of LED bodies
+#define ISSI3733_LED_COUNT 119
+
+//Default Global Current Register value (Default brightness 0 - 255)
+#define ISSI3733_GCR_DEFAULT 128
+
+#define LED_GCR_MAX                 165         //Max GCR value (0 - 255) WARNING: Raising this value may overload the LED drivers and USB bus
+#define LED_GCR_STEP                10          //GCR increment/decrement value
+
+//Automatic power rollback and recovery
+#define V5_HIGH                     2540        //5V high level (After low power detect, point at which LEDs are allowed to use more power )
+#define V5_LOW                      2480        //5V low level (LED power rolled back to stay above this limit)
+#define V5_CAT                      2200        //5V catastrophic level (Host USB port potential to shut down)
+
+#define ANIMATION_SPEED_STEP        1
+
+#define BREATHE_MIN_STEP            0
+#define BREATHE_MAX_STEP            255
+
+//LED Mapping - More practically generated from a spreadsheet program
+//id: ID of the LED (Sync with PCB callouts)
+//x: Physical X coordinate of LED (units do not matter)
+//y: Physical Y coordinate of LED (units do not matter)
+//drv: 1-Based index of ISSI3773_DRIVER_ADDRESSES
+//cs: Matrix wiring CS col (1-16)
+//swr: Matrix wiring SW Red row (1-12)
+//swg: Matrix wiring SW Green row (1-12)
+//swb: Matrix wiring SW Blue row (1-12)
+//scan: Associated key scancode if any
+//Note: Origin 0,0 may be located anywhere as the software will do the final layout
+#define ISSI3733_LED_MAP { \
+ { .id = 1, .x = 0, .y = 0, .adr = { .drv = 2, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 0 }, \
+ { .id = 2, .x = 1.5, .y = 0, .adr = { .drv = 2, .cs = 3, .swr = 5, .swg = 4, .swb = 6 }, .scan = 1 }, \
+ { .id = 3, .x = 2.25, .y = 0, .adr = { .drv = 2, .cs = 4, .swr = 5, .swg = 4, .swb = 6 }, .scan = 2 }, \
+ { .id = 4, .x = 3, .y = 0, .adr = { .drv = 2, .cs = 5, .swr = 5, .swg = 4, .swb = 6 }, .scan = 3 }, \
+ { .id = 5, .x = 3.75, .y = 0, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 4 }, \
+ { .id = 6, .x = 4.875, .y = 0, .adr = { .drv = 2, .cs = 7, .swr = 5, .swg = 4, .swb = 6 }, .scan = 5 }, \
+ { .id = 7, .x = 5.625, .y = 0, .adr = { .drv = 2, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 6 }, \
+ { .id = 8, .x = 6.375, .y = 0, .adr = { .drv = 1, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 7 }, \
+ { .id = 9, .x = 7.125, .y = 0, .adr = { .drv = 1, .cs = 2, .swr = 5, .swg = 4, .swb = 6 }, .scan = 90 }, \
+ { .id = 10, .x = 8.25, .y = 0, .adr = { .drv = 1, .cs = 3, .swr = 5, .swg = 4, .swb = 6 }, .scan = 91 }, \
+ { .id = 11, .x = 9, .y = 0, .adr = { .drv = 1, .cs = 4, .swr = 5, .swg = 4, .swb = 6 }, .scan = 92 }, \
+ { .id = 12, .x = 9.75, .y = 0, .adr = { .drv = 1, .cs = 5, .swr = 5, .swg = 4, .swb = 6 }, .scan = 93 }, \
+ { .id = 13, .x = 10.5, .y = 0, .adr = { .drv = 1, .cs = 6, .swr = 5, .swg = 4, .swb = 6 }, .scan = 94 }, \
+ { .id = 14, .x = 11.625, .y = 0, .adr = { .drv = 1, .cs = 7, .swr = 5, .swg = 4, .swb = 6 }, .scan = 95 }, \
+ { .id = 15, .x = 12.375, .y = 0, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 96 }, \
+ { .id = 16, .x = 13.125, .y = 0, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 97 }, \
+ { .id = 17, .x = 0, .y = -1.125, .adr = { .drv = 2, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 15 }, \
+ { .id = 18, .x = 0.75, .y = -1.125, .adr = { .drv = 2, .cs = 2, .swr = 8, .swg = 7, .swb = 9 }, .scan = 16 }, \
+ { .id = 19, .x = 1.5, .y = -1.125, .adr = { .drv = 2, .cs = 3, .swr = 8, .swg = 7, .swb = 9 }, .scan = 17 }, \
+ { .id = 20, .x = 2.25, .y = -1.125, .adr = { .drv = 2, .cs = 4, .swr = 8, .swg = 7, .swb = 9 }, .scan = 18 }, \
+ { .id = 21, .x = 3, .y = -1.125, .adr = { .drv = 2, .cs = 5, .swr = 8, .swg = 7, .swb = 9 }, .scan = 19 }, \
+ { .id = 22, .x = 3.75, .y = -1.125, .adr = { .drv = 2, .cs = 6, .swr = 8, .swg = 7, .swb = 9 }, .scan = 20 }, \
+ { .id = 23, .x = 4.5, .y = -1.125, .adr = { .drv = 2, .cs = 7, .swr = 8, .swg = 7, .swb = 9 }, .scan = 21 }, \
+ { .id = 24, .x = 5.25, .y = -1.125, .adr = { .drv = 2, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 22 }, \
+ { .id = 25, .x = 6, .y = -1.125, .adr = { .drv = 1, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 105 }, \
+ { .id = 26, .x = 6.75, .y = -1.125, .adr = { .drv = 1, .cs = 2, .swr = 8, .swg = 7, .swb = 9 }, .scan = 106 }, \
+ { .id = 27, .x = 7.5, .y = -1.125, .adr = { .drv = 1, .cs = 3, .swr = 8, .swg = 7, .swb = 9 }, .scan = 107 }, \
+ { .id = 28, .x = 8.25, .y = -1.125, .adr = { .drv = 1, .cs = 4, .swr = 8, .swg = 7, .swb = 9 }, .scan = 108 }, \
+ { .id = 29, .x = 9, .y = -1.125, .adr = { .drv = 1, .cs = 5, .swr = 8, .swg = 7, .swb = 9 }, .scan = 109 }, \
+ { .id = 30, .x = 10.125, .y = -1.125, .adr = { .drv = 1, .cs = 6, .swr = 8, .swg = 7, .swb = 9 }, .scan = 110 }, \
+ { .id = 31, .x = 11.625, .y = -1.125, .adr = { .drv = 1, .cs = 7, .swr = 8, .swg = 7, .swb = 9 }, .scan = 111 }, \
+ { .id = 32, .x = 12.375, .y = -1.125, .adr = { .drv = 1, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 112 }, \
+ { .id = 33, .x = 13.125, .y = -1.125, .adr = { .drv = 1, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 142 }, \
+ { .id = 34, .x = 0.188, .y = -1.875, .adr = { .drv = 2, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 30 }, \
+ { .id = 35, .x = 1.125, .y = -1.875, .adr = { .drv = 2, .cs = 2, .swr = 11, .swg = 10, .swb = 12 }, .scan = 31 }, \
+ { .id = 36, .x = 1.875, .y = -1.875, .adr = { .drv = 2, .cs = 3, .swr = 11, .swg = 10, .swb = 12 }, .scan = 32 }, \
+ { .id = 37, .x = 2.625, .y = -1.875, .adr = { .drv = 2, .cs = 4, .swr = 11, .swg = 10, .swb = 12 }, .scan = 33 }, \
+ { .id = 38, .x = 3.375, .y = -1.875, .adr = { .drv = 2, .cs = 5, .swr = 11, .swg = 10, .swb = 12 }, .scan = 34 }, \
+ { .id = 39, .x = 4.125, .y = -1.875, .adr = { .drv = 2, .cs = 6, .swr = 11, .swg = 10, .swb = 12 }, .scan = 35 }, \
+ { .id = 40, .x = 4.875, .y = -1.875, .adr = { .drv = 2, .cs = 7, .swr = 11, .swg = 10, .swb = 12 }, .scan = 36 }, \
+ { .id = 41, .x = 5.625, .y = -1.875, .adr = { .drv = 2, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 37 }, \
+ { .id = 42, .x = 6.375, .y = -1.875, .adr = { .drv = 1, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 120 }, \
+ { .id = 43, .x = 7.125, .y = -1.875, .adr = { .drv = 1, .cs = 2, .swr = 11, .swg = 10, .swb = 12 }, .scan = 121 }, \
+ { .id = 44, .x = 7.875, .y = -1.875, .adr = { .drv = 1, .cs = 3, .swr = 11, .swg = 10, .swb = 12 }, .scan = 122 }, \
+ { .id = 45, .x = 8.625, .y = -1.875, .adr = { .drv = 1, .cs = 4, .swr = 11, .swg = 10, .swb = 12 }, .scan = 123 }, \
+ { .id = 46, .x = 9.375, .y = -1.875, .adr = { .drv = 1, .cs = 5, .swr = 11, .swg = 10, .swb = 12 }, .scan = 124 }, \
+ { .id = 47, .x = 10.312, .y = -1.875, .adr = { .drv = 1, .cs = 6, .swr = 11, .swg = 10, .swb = 12 }, .scan = 125 }, \
+ { .id = 48, .x = 11.625, .y = -1.875, .adr = { .drv = 1, .cs = 7, .swr = 11, .swg = 10, .swb = 12 }, .scan = 126 }, \
+ { .id = 49, .x = 12.375, .y = -1.875, .adr = { .drv = 1, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 127 }, \
+ { .id = 50, .x = 13.125, .y = -1.875, .adr = { .drv = 1, .cs = 9, .swr = 11, .swg = 10, .swb = 12 }, .scan = 141 }, \
+ { .id = 51, .x = 0.281, .y = -2.625, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 45 }, \
+ { .id = 52, .x = 1.313, .y = -2.625, .adr = { .drv = 2, .cs = 2, .swr = 5, .swg = 4, .swb = 6 }, .scan = 46 }, \
+ { .id = 53, .x = 2.063, .y = -2.625, .adr = { .drv = 2, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 47 }, \
+ { .id = 54, .x = 2.812, .y = -2.625, .adr = { .drv = 2, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 48 }, \
+ { .id = 55, .x = 3.562, .y = -2.625, .adr = { .drv = 2, .cs = 11, .swr = 11, .swg = 10, .swb = 12 }, .scan = 49 }, \
+ { .id = 56, .x = 4.312, .y = -2.625, .adr = { .drv = 2, .cs = 6, .swr = 5, .swg = 4, .swb = 6 }, .scan = 50 }, \
+ { .id = 57, .x = 5.062, .y = -2.625, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 51 }, \
+ { .id = 58, .x = 5.812, .y = -2.625, .adr = { .drv = 2, .cs = 9, .swr = 11, .swg = 10, .swb = 12 }, .scan = 52 }, \
+ { .id = 59, .x = 6.562, .y = -2.625, .adr = { .drv = 1, .cs = 16, .swr = 11, .swg = 10, .swb = 12 }, .scan = 135 }, \
+ { .id = 60, .x = 7.312, .y = -2.625, .adr = { .drv = 1, .cs = 15, .swr = 11, .swg = 10, .swb = 12 }, .scan = 136 }, \
+ { .id = 61, .x = 8.062, .y = -2.625, .adr = { .drv = 1, .cs = 14, .swr = 11, .swg = 10, .swb = 12 }, .scan = 137 }, \
+ { .id = 62, .x = 8.812, .y = -2.625, .adr = { .drv = 1, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 138 }, \
+ { .id = 63, .x = 10.031, .y = -2.625, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 139 }, \
+ { .id = 64, .x = 0.469, .y = -3.375, .adr = { .drv = 2, .cs = 14, .swr = 5, .swg = 4, .swb = 6 }, .scan = 60 }, \
+ { .id = 65, .x = 1.688, .y = -3.375, .adr = { .drv = 2, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 61 }, \
+ { .id = 66, .x = 2.438, .y = -3.375, .adr = { .drv = 2, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 62 }, \
+ { .id = 67, .x = 3.188, .y = -3.375, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 63 }, \
+ { .id = 68, .x = 3.938, .y = -3.375, .adr = { .drv = 2, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 64 }, \
+ { .id = 69, .x = 4.688, .y = -3.375, .adr = { .drv = 2, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 65 }, \
+ { .id = 70, .x = 5.438, .y = -3.375, .adr = { .drv = 2, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 66 }, \
+ { .id = 71, .x = 6.188, .y = -3.375, .adr = { .drv = 2, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 67 }, \
+ { .id = 72, .x = 6.938, .y = -3.375, .adr = { .drv = 1, .cs = 16, .swr = 8, .swg = 7, .swb = 9 }, .scan = 150 }, \
+ { .id = 73, .x = 7.688, .y = -3.375, .adr = { .drv = 1, .cs = 15, .swr = 8, .swg = 7, .swb = 9 }, .scan = 151 }, \
+ { .id = 74, .x = 8.438, .y = -3.375, .adr = { .drv = 1, .cs = 14, .swr = 8, .swg = 7, .swb = 9 }, .scan = 152 }, \
+ { .id = 75, .x = 9.844, .y = -3.375, .adr = { .drv = 1, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 153 }, \
+ { .id = 76, .x = 12.375, .y = -3.375, .adr = { .drv = 1, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 140 }, \
+ { .id = 77, .x = 0.094, .y = -4.125, .adr = { .drv = 2, .cs = 14, .swr = 11, .swg = 10, .swb = 12 }, .scan = 75 }, \
+ { .id = 78, .x = 1.031, .y = -4.125, .adr = { .drv = 2, .cs = 14, .swr = 8, .swg = 7, .swb = 9 }, .scan = 76 }, \
+ { .id = 79, .x = 1.969, .y = -4.125, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 77 }, \
+ { .id = 80, .x = 4.781, .y = -4.125, .adr = { .drv = 2, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 78 }, \
+ { .id = 81, .x = 7.594, .y = -4.125, .adr = { .drv = 1, .cs = 16, .swr = 5, .swg = 4, .swb = 6 }, .scan = 79 }, \
+ { .id = 82, .x = 8.531, .y = -4.125, .adr = { .drv = 1, .cs = 15, .swr = 5, .swg = 4, .swb = 6 }, .scan = 80 }, \
+ { .id = 83, .x = 9.469, .y = -4.125, .adr = { .drv = 1, .cs = 14, .swr = 5, .swg = 4, .swb = 6 }, .scan = 81 }, \
+ { .id = 84, .x = 10.406, .y = -4.125, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 82 }, \
+ { .id = 85, .x = 11.625, .y = -4.125, .adr = { .drv = 1, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 154 }, \
+ { .id = 86, .x = 12.375, .y = -4.125, .adr = { .drv = 1, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 155 }, \
+ { .id = 87, .x = 13.125, .y = -4.125, .adr = { .drv = 1, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 156 }, \
+ { .id = 88, .x = 13.433, .y = -4.43, .adr = { .drv = 1, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 89, .x = 12.285, .y = -4.535, .adr = { .drv = 1, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 90, .x = 11.14, .y = -4.535, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 91, .x = 9.995, .y = -4.535, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 92, .x = 8.85, .y = -4.535, .adr = { .drv = 1, .cs = 15, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 93, .x = 7.705, .y = -4.535, .adr = { .drv = 1, .cs = 16, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 94, .x = 6.56, .y = -4.535, .adr = { .drv = 2, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 95, .x = 5.415, .y = -4.535, .adr = { .drv = 2, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 96, .x = 4.27, .y = -4.535, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 97, .x = 3.125, .y = -4.535, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 98, .x = 1.98, .y = -4.535, .adr = { .drv = 2, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 99, .x = 0.835, .y = -4.535, .adr = { .drv = 2, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 100, .x = -0.307, .y = -4.43, .adr = { .drv = 2, .cs = 15, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 101, .x = -0.41, .y = -3.245, .adr = { .drv = 2, .cs = 15, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 102, .x = -0.41, .y = -2.06, .adr = { .drv = 2, .cs = 15, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+ { .id = 103, .x = -0.41, .y = -0.875, .adr = { .drv = 2, .cs = 15, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 104, .x = -0.308, .y = 0.31, .adr = { .drv = 2, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 105, .x = 0.835, .y = 0.415, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 106, .x = 1.98, .y = 0.415, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 107, .x = 3.125, .y = 0.415, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 108, .x = 4.27, .y = 0.415, .adr = { .drv = 2, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 109, .x = 5.415, .y = 0.415, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 110, .x = 6.56, .y = 0.415, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 111, .x = 7.705, .y = 0.415, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 112, .x = 8.85, .y = 0.415, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 113, .x = 9.995, .y = 0.415, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 114, .x = 11.14, .y = 0.415, .adr = { .drv = 1, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 115, .x = 12.285, .y = 0.415, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 116, .x = 13.432, .y = 0.31, .adr = { .drv = 1, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \
+ { .id = 117, .x = 13.535, .y = -0.875, .adr = { .drv = 1, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \
+ { .id = 118, .x = 13.535, .y = -2.06, .adr = { .drv = 1, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \
+ { .id = 119, .x = 13.535, .y = -3.245, .adr = { .drv = 1, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \
+};
+
+#define USB_LED_INDICATOR_ENABLE    //Comment out to disable indicator functionality
+#ifdef USB_LED_INDICATOR_ENABLE     //Scan codes refer to actual key matrix codes, not KC_* (255 to disable)
+    #define USB_LED_NUM_LOCK_SCANCODE       255
+    #define USB_LED_CAPS_LOCK_SCANCODE      45
+    #define USB_LED_SCROLL_LOCK_SCANCODE    96
+    #define USB_LED_COMPOSE_SCANCODE        255
+    #define USB_LED_KANA_SCANCODE           255
+#endif //USB_LED_INDICATOR_ENABLE
+
+#endif //_config_led_h_

keyboards/ctrl/ctrl.h

@@ -0,0 +1,32 @@
+#pragma once
+
+#include "quantum.h"
+#include "config_led.h"
+#include "matrix.h"
+
+#include "i2c_master.h"
+#include "led_matrix.h" //For led keycodes
+#include "usb/udi_cdc.h"
+#include "usb/usb2422.h"
+
+#define LAYOUT( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \
+    K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30, \
+    K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, \
+    K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K60, \
+    K61, K62, K63, K64, K65, K66, K67, K68, K69, K70, K71, K72, K73, K74, K75, \
+    K76, K77, K78, K79, K80, K81, K82, K83, K84, K85, K86, K87 \
+    \
+) { \
+    {   K01, K02, K03, K04, K05, K06, K07, K08   }, \
+    {   K17, K18, K19, K20, K21, K22, K23, K24   }, \
+    {   K34, K35, K36, K37, K38, K39, K40, K41   }, \
+    {   K51, K52, K53, K54, K55, K56, K57, K58   }, \
+    {   K64, K65, K66, K67, K68, K69, K70, K71   }, \
+    {   K77, K78, K79, K80, K81, K82, K83, K84   }, \
+    {   K09, K10, K11, K12, K13, K14, K15, K16   }, \
+    {   K25, K26, K27, K28, K29, K30, K31, K32   }, \
+    {   K42, K43, K44, K45, K46, K47, K48, K49   }, \
+    {   K59, K60, K61, K62, K63, K76, K50, K33   }, \
+    {   K72, K73, K74, K75, K85, K86, K87,       }, \
+}

keyboards/ctrl/keymaps/default/keymap.c

@@ -0,0 +1,203 @@
+#include QMK_KEYBOARD_H
+
+enum alt67_keycodes {
+    L_BRI = SAFE_RANGE, //LED Brightness Increase
+    L_BRD,              //LED Brightness Decrease
+    L_PTN,              //LED Pattern Select Next
+    L_PTP,              //LED Pattern Select Previous
+    L_PSI,              //LED Pattern Speed Increase
+    L_PSD,              //LED Pattern Speed Decrease
+    L_T_MD,             //LED Toggle Mode
+    L_T_ONF,            //LED Toggle On / Off
+    L_ON,               //LED On
+    L_OFF,              //LED Off
+    L_T_BR,             //LED Toggle Breath Effect
+    L_T_PTD,            //LED Toggle Scrolling Pattern Direction
+    U_T_AUTO,           //USB Extra Port Toggle Auto Detect / Always Active
+    U_T_AGCR,           //USB Toggle Automatic GCR control
+    DBG_TOG,            //DEBUG Toggle On / Off
+    DBG_MTRX,           //DEBUG Toggle Matrix Prints
+    DBG_KBD,            //DEBUG Toggle Keyboard Prints
+    DBG_MOU,            //DEBUG Toggle Mouse Prints
+};
+
+#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode
+
+keymap_config_t keymap_config;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,   KC_INS,  KC_HOME, KC_PGUP, \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,   KC_DEL,  KC_END,  KC_PGDN, \
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                              KC_UP, \
+        KC_LCTL, KC_LGUI, KC_LALT,                  KC_SPC,                              KC_RALT, MO(1),   KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT \
+    ),
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_MUTE, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_MPLY, KC_MSTP, KC_VOLU, \
+        L_T_BR,  L_PSD,   L_BRI,   L_PSI,   KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_MPRV, KC_MNXT, KC_VOLD, \
+        L_T_PTD, L_PTP,   L_BRD,   L_PTN,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, L_T_MD,  L_T_ONF, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                              KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
+    ),
+    /*
+    [X] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                              KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
+    ),
+    */
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+};
+
+#define MODS_SHIFT  (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT))
+#define MODS_CTRL  (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL))
+#define MODS_ALT  (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT))
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case L_BRI:
+            if (record->event.pressed) {
+                if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX;
+                else gcr_desired += LED_GCR_STEP;
+                if (led_animation_breathing) gcr_breathe = gcr_desired;
+            }
+            return false;
+        case L_BRD:
+            if (record->event.pressed) {
+                if (LED_GCR_STEP > gcr_desired) gcr_desired = 0;
+                else gcr_desired -= LED_GCR_STEP;
+                if (led_animation_breathing) gcr_breathe = gcr_desired;
+            }
+            return false;
+        case L_PTN:
+            if (record->event.pressed) {
+                if (led_animation_id == led_setups_count - 1) led_animation_id = 0;
+                else led_animation_id++;
+            }
+            return false;
+        case L_PTP:
+            if (record->event.pressed) {
+                if (led_animation_id == 0) led_animation_id = led_setups_count - 1;
+                else led_animation_id--;
+            }
+            return false;
+        case L_PSI:
+            if (record->event.pressed) {
+                led_animation_speed += ANIMATION_SPEED_STEP;
+            }
+            return false;
+        case L_PSD:
+            if (record->event.pressed) {
+                led_animation_speed -= ANIMATION_SPEED_STEP;
+                if (led_animation_speed < 0) led_animation_speed = 0;
+            }
+            return false;
+        case L_T_MD:
+            if (record->event.pressed) {
+                led_lighting_mode++;
+                if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL;
+            }
+            return false;
+        case L_T_ONF:
+            if (record->event.pressed) {
+                led_enabled = !led_enabled;
+                I2C3733_Control_Set(led_enabled);
+            }
+            return false;
+        case L_ON:
+            if (record->event.pressed) {
+                led_enabled = 1;
+                I2C3733_Control_Set(led_enabled);
+            }
+            return false;
+        case L_OFF:
+            if (record->event.pressed) {
+                led_enabled = 0;
+                I2C3733_Control_Set(led_enabled);
+            }
+            return false;
+        case L_T_BR:
+            if (record->event.pressed) {
+                led_animation_breathing = !led_animation_breathing;
+                if (led_animation_breathing)
+                {
+                    gcr_breathe = gcr_desired;
+                    led_animation_breathe_cur = BREATHE_MIN_STEP;
+                    breathe_dir = 1;
+                }
+            }
+            return false;
+        case L_T_PTD:
+            if (record->event.pressed) {
+                led_animation_direction = !led_animation_direction;
+            }
+            return false;
+        case U_T_AUTO:
+            if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+                usb_extra_manual = !usb_extra_manual;
+                CDC_print("USB extra port manual mode ");
+                CDC_print(usb_extra_manual ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case U_T_AGCR:
+            if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+                usb_gcr_auto = !usb_gcr_auto;
+                CDC_print("USB GCR auto mode ");
+                CDC_print(usb_gcr_auto ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case DBG_TOG:
+            if (record->event.pressed) {
+                debug_enable = !debug_enable;
+                CDC_print("Debug mode ");
+                CDC_print(debug_enable ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case DBG_MTRX:
+            if (record->event.pressed) {
+                debug_matrix = !debug_matrix;
+                CDC_print("Debug matrix ");
+                CDC_print(debug_matrix ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case DBG_KBD:
+            if (record->event.pressed) {
+                debug_keyboard = !debug_keyboard;
+                CDC_print("Debug keyboard ");
+                CDC_print(debug_keyboard ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        case DBG_MOU:
+            if (record->event.pressed) {
+                debug_mouse = !debug_mouse;
+                CDC_print("Debug mouse ");
+                CDC_print(debug_mouse ? "enabled" : "disabled");
+                CDC_print("\r\n");
+            }
+            return false;
+        default:
+            return true; //Process all other keycodes normally
+    }
+}

keyboards/ctrl/led_programs.c

@@ -0,0 +1,120 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ctrl.h"
+#include "led_matrix.h"
+
+//Teal <-> Salmon
+led_setup_t leds_teal_salmon[] = {
+    { .hs = 0,  .he = 33,  .rs = 24,  .re = 24,  .gs = 215, .ge = 215, .bs = 204, .be = 204, .ef = EF_NONE },
+    { .hs = 33, .he = 66,  .rs = 24,  .re = 255, .gs = 215, .ge = 114, .bs = 204, .be = 118, .ef = EF_NONE },
+    { .hs = 66, .he = 100, .rs = 255, .re = 255, .gs = 114, .ge = 114, .bs = 118, .be = 118, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Yellow
+led_setup_t leds_yellow[] = {
+    { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Off
+led_setup_t leds_off[] = {
+    { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Red
+led_setup_t leds_red[] = {
+    { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Green
+led_setup_t leds_green[] = {
+    { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//Blue
+led_setup_t leds_blue[] = {
+    { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//White
+led_setup_t leds_white[] = {
+    { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE },
+    { .end = 1 },
+};
+
+//White with moving red stripe
+led_setup_t leds_white_with_red_stripe[] = {
+    { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE },
+    { .hs = 0, .he = 15, .rs = 0, .re = 0, .gs = 0, .ge = 255, .bs = 0, .be = 255, .ef = EF_SCR_R | EF_SUBTRACT },
+    { .hs = 15, .he = 30, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 0, .ef = EF_SCR_R | EF_SUBTRACT },
+    { .end = 1 },
+};
+
+//Black with moving red stripe
+led_setup_t leds_black_with_red_stripe[] = {
+    { .hs = 0, .he = 15, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R },
+    { .hs = 15, .he = 30, .rs = 255, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R },
+    { .end = 1 },
+};
+
+//Rainbow no scrolling
+led_setup_t leds_rainbow_ns[] = {
+    { .hs = 0,      .he = 16.67,  .rs = 255, .re = 255, .gs = 0,   .ge = 255, .bs = 0,   .be = 0,   .ef = EF_OVER },
+    { .hs = 16.67,  .he = 33.33,  .rs = 255, .re = 0,   .gs = 255, .ge = 255, .bs = 0,   .be = 0,   .ef = EF_OVER },
+    { .hs = 33.33,  .he = 50,     .rs = 0,   .re = 0,   .gs = 255, .ge = 255, .bs = 0,   .be = 255, .ef = EF_OVER },
+    { .hs = 50,     .he = 66.67,  .rs = 0,   .re = 0,   .gs = 255, .ge = 0,   .bs = 255, .be = 255, .ef = EF_OVER },
+    { .hs = 66.67,  .he = 83.33,  .rs = 0,   .re = 255, .gs = 0,   .ge = 0,   .bs = 255, .be = 255, .ef = EF_OVER },
+    { .hs = 83.33,  .he = 100,    .rs = 255, .re = 255, .gs = 0,   .ge = 0,   .bs = 255, .be = 0,   .ef = EF_OVER },
+    { .end = 1 },
+};
+
+//Rainbow scrolling
+led_setup_t leds_rainbow_s[] = {
+    { .hs = 0,      .he = 16.67,  .rs = 255, .re = 255, .gs = 0,   .ge = 255, .bs = 0,   .be = 0,   .ef = EF_OVER | EF_SCR_R },
+    { .hs = 16.67,  .he = 33.33,  .rs = 255, .re = 0,   .gs = 255, .ge = 255, .bs = 0,   .be = 0,   .ef = EF_OVER | EF_SCR_R },
+    { .hs = 33.33,  .he = 50,     .rs = 0,   .re = 0,   .gs = 255, .ge = 255, .bs = 0,   .be = 255, .ef = EF_OVER | EF_SCR_R },
+    { .hs = 50,     .he = 66.67,  .rs = 0,   .re = 0,   .gs = 255, .ge = 0,   .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R },
+    { .hs = 66.67,  .he = 83.33,  .rs = 0,   .re = 255, .gs = 0,   .ge = 0,   .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R },
+    { .hs = 83.33,  .he = 100,    .rs = 255, .re = 255, .gs = 0,   .ge = 0,   .bs = 255, .be = 0,   .ef = EF_OVER | EF_SCR_R },
+    { .end = 1 },
+};
+
+//Add new LED animations here using one from above as example
+//The last entry must be { .end = 1 }
+//Add the new animation name to the list below following its format
+
+void *led_setups[] = {
+    leds_rainbow_s,
+    leds_rainbow_ns,
+    leds_teal_salmon,
+    leds_yellow,
+    leds_red,
+    leds_green,
+    leds_blue,
+    leds_white,
+    leds_white_with_red_stripe,
+    leds_black_with_red_stripe,
+    leds_off
+};
+
+const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]);

keyboards/ctrl/matrix.c

@@ -0,0 +1,182 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ctrl.h"
+
+#include "d51_util.h"
+#include "debug.h"
+#include "clks.h"
+#include <string.h>
+
+matrix_row_t mlatest[MATRIX_ROWS];
+matrix_row_t mlast[MATRIX_ROWS];
+matrix_row_t mdebounced[MATRIX_ROWS];
+
+uint8_t row_ports[] = { MATRIX_ROW_PORTS };
+uint8_t row_pins[] = { MATRIX_ROW_PINS };
+uint8_t col_ports[] = { MATRIX_COL_PORTS };
+uint8_t col_pins[] = { MATRIX_COL_PINS };
+uint32_t row_masks[2]; //NOTE: If more than PA PB used in the future, adjust code to accomodate
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void matrix_init(void)
+{
+    memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(mlast, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(mdebounced, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+
+    row_masks[PA] = 0;
+    row_masks[PB] = 0;
+
+    uint8_t row;
+    for (row = 0; row < MATRIX_ROWS; row++)
+    {
+        PORT->Group[row_ports[row]].DIRCLR.reg = 1 << row_pins[row]; //Input
+        PORT->Group[row_ports[row]].OUTCLR.reg = 1 << row_pins[row]; //Low
+        PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.INEN = 1; //Input Enable,
+        PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.PULLEN = 1; //Pull Enable
+        row_masks[row_ports[row]] |= 1 << row_pins[row]; //Add pin to proper row mask
+    }
+
+    uint8_t col;
+    for (col = 0; col < MATRIX_COLS; col++)
+    {
+        PORT->Group[col_ports[col]].DIRSET.reg = 1 << col_pins[col]; //Output
+        PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Low
+    }
+    
+    matrix_init_quantum();
+}
+
+#define MATRIX_SCAN_DELAY 10   //Delay after setting a col to output (in us)
+
+uint64_t mdebouncing = 0;
+uint8_t matrix_scan(void)
+{
+    uint8_t mchanged;
+    uint8_t row;
+    uint8_t col;
+    uint32_t scans[2]; //PA PB
+
+    if (CLK_get_ms() < mdebouncing) return 1; //mdebouncing == 0 when no debouncing active
+
+    //m15_off; //Profiling scans
+
+    memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); //Zero the result buffer
+
+    for (col = 0; col < MATRIX_COLS; col++)
+    {
+        PORT->Group[col_ports[col]].OUTSET.reg = 1 << col_pins[col]; //Set col output
+
+        CLK_delay_us(MATRIX_SCAN_DELAY); //Delay for output
+
+        scans[PA] = PORT->Group[PA].IN.reg & row_masks[PA]; //Read PA row pins data
+        scans[PB] = PORT->Group[PB].IN.reg & row_masks[PB]; //Read PB row pins data
+
+        PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Clear col output
+
+        for (row = 0; row < MATRIX_ROWS; row++)
+        {
+            //Move scan bits from scans array into proper row bit locations
+            if (scans[row_ports[row]] & (1 << row_pins[row]))
+                mlatest[row] |= 1 << col;
+        }
+    }
+
+    mchanged = 0; //Default to no matrix change since last
+
+    for (row = 0; row < MATRIX_ROWS; row++)
+    {
+        if (mlast[row] != mlatest[row])
+            mchanged = 1;
+        mlast[row] = mlatest[row];
+    }
+
+    if (!mchanged)
+    {
+        for (row = 0; row < MATRIX_ROWS; row++)
+            mdebounced[row] = mlatest[row];
+        mdebouncing = 0;
+    }
+    else
+    {
+        //Begin or extend debounce on change
+        mdebouncing = CLK_get_ms() + DEBOUNCING_DELAY;
+    }
+
+    //m15_on; //Profiling scans
+
+    matrix_scan_quantum();
+
+    return 1;
+}
+
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return mdebounced[row];
+}
+
+void matrix_print(void)
+{
+    char buf[(MATRIX_COLS+8)*(MATRIX_ROWS+1)] = "R C";
+    char *pbuf = buf+3;
+    uint32_t cols;
+    uint32_t rows;
+    matrix_row_t row;
+
+    for (cols = 1; cols <= MATRIX_COLS; cols++)
+    {
+        *pbuf = (cols%10)+48;
+        pbuf++;
+    }
+    *pbuf = '\r'; pbuf++;
+    *pbuf = '\n'; pbuf++;
+
+    for (rows = 1; rows <= MATRIX_ROWS; rows++)
+    {
+        row = matrix_get_row(rows-1);
+        if (rows < 10) { *pbuf = rows+48; pbuf++; *pbuf = ' '; pbuf++; *pbuf = ' '; pbuf++; }
+        else { *pbuf = (rows/10)+48; pbuf++; *pbuf = (rows%10)+48; pbuf++; *pbuf = ' '; pbuf++; }
+        for (cols = 0; cols < MATRIX_COLS; cols++)
+        {
+            if (row & 1 << cols) *pbuf = 'X';
+            else                 *pbuf = '.';
+            pbuf++;
+        }
+        *pbuf = '\r'; pbuf++;
+        *pbuf = '\n'; pbuf++;
+    }
+    *pbuf = 0;
+    dprint(buf);
+}

keyboards/ctrl/matrix.h

@@ -0,0 +1,77 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef MATRIX_H
+#define MATRIX_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "keyboard.h"
+
+#if (MATRIX_COLS <= 8)
+typedef  uint8_t    matrix_row_t;
+#elif (MATRIX_COLS <= 16)
+typedef  uint16_t   matrix_row_t;
+#elif (MATRIX_COLS <= 32)
+typedef  uint32_t   matrix_row_t;
+#else
+#error "MATRIX_COLS: invalid value"
+#endif
+
+#define MATRIX_IS_ON(row, col)  (matrix_get_row(row) && (1<<col))
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* number of matrix rows */
+uint8_t matrix_rows(void);
+/* number of matrix columns */
+uint8_t matrix_cols(void);
+/* should be called at early stage of startup before matrix_init.(optional) */
+void matrix_setup(void);
+/* intialize matrix for scaning. */
+void matrix_init(void);
+/* scan all key states on matrix */
+uint8_t matrix_scan(void);
+/* whether modified from previous scan. used after matrix_scan. */
+bool matrix_is_modified(void) __attribute__ ((deprecated));
+/* whether a switch is on */
+bool matrix_is_on(uint8_t row, uint8_t col);
+/* matrix state on row */
+matrix_row_t matrix_get_row(uint8_t row);
+/* print matrix for debug */
+void matrix_print(void);
+
+/* power control */
+void matrix_power_up(void);
+void matrix_power_down(void);
+
+/* executes code for Quantum */
+void matrix_init_quantum(void);
+void matrix_scan_quantum(void);
+
+void matrix_init_kb(void);
+void matrix_scan_kb(void);
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

keyboards/ctrl/readme.md

@@ -0,0 +1,15 @@
+# CTRL
+
+![CTRL](https://massdrop-s3.imgix.net/product-images/massdrop-ntkl-mechanical-keyboard/FP/W6zvr0cTR4KVDY5z8rwp_AI7B6588%20copy%20page.jpg?auto=format&fm=jpg&fit=max&w=700&h=467&dpr=1&q=80)
+
+The Massdrop CTRL is a TKL mechanical keyboard featuring dual USB-C connectors, an integrated Hi-Speed USB 2.0 hub, and fully customizable RGB backlighting and underlighting.
+
+Keyboard Maintainer: [Massdrop](https://github.com/massdrop)  
+Hardware Supported: Massdrop, Inc. CTRL PCBs utilizing Microchip's ATSAMD51J18A MCU and USB2422 2-Port USB 2.0 Hi-Speed Hub Controller, and ISSI's IS31FL3733 LED Drivers.  
+Hardware Availability: [Massdrop CTRL Mechanical Keyboard](https://www.massdrop.com/buy/massdrop-ctrl-mechanical-keyboard)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ctrl:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ctrl/rules.mk

@@ -0,0 +1,32 @@
+# project specific files
+SRC = led_programs.c
+SRC += matrix.c
+
+#For platform and packs
+ARM_ATSAM = SAMD51J18A
+MCU = cortex-m4
+
+CUSTOM_MATRIX = yes
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+VIRTSER_ENABLE = no         # USB Serial Driver
+RAW_ENABLE = no             # Raw device

keyboards/duck/eagle_viper/readme.md

@@ -8,5 +8,5 @@ Newest version is the [Eagle/Viper V2](http://duck0113.tistory.com/127)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make eagle_viper/v2:default
+    make duck/eagle_viper/v2:default
 

keyboards/duck/eagle_viper/rules.mk

@@ -0,0 +1,3 @@
+DEFAULT_FOLDER = duck/eagle_viper/v2
+
+LAYOUTS = 60_ansi

keyboards/duck/eagle_viper/v2/v2.h

@@ -16,7 +16,7 @@
 #ifndef V2_H
 #define V2_H
 
-#include "../eagle_viper.h"
+#include "quantum.h"
 
 #define ___ KC_NO
 

keyboards/duck/jetfire/backlight_led.c

@@ -0,0 +1,129 @@
+/*
+Copyright 2016 Ralf Schmitt <ralf@bunkertor.net>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <stdbool.h>
+#include <util/delay.h>
+#include <stdint.h>
+#include "backlight_led.h"
+#include "quantum.h"
+// #include "led.h"
+
+
+#define T1H  900
+#define T1L  600
+#define T0H  400
+#define T0L  900
+#define RES 6000
+
+#define NS_PER_SEC (1000000000L)
+#define CYCLES_PER_SEC (F_CPU)
+#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
+#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
+
+void send_bit_d4(bool bitVal)
+{
+  if(bitVal) {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(T1H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
+  } else {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(T0H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
+  }
+}
+
+void send_bit_d6(bool bitVal)
+{
+  if(bitVal) {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (6),
+        [onCycles]  "I" (NS_TO_CYCLES(T1H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
+  } else {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (6),
+        [onCycles]  "I" (NS_TO_CYCLES(T0H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
+  }
+}
+
+void show(void)
+{
+  _delay_us((RES / 1000UL) + 1);
+}
+
+void send_value(uint8_t byte, enum Device device)
+{
+  for(uint8_t b = 0; b < 8; b++) {
+    if(device == Device_STATELED) {
+      send_bit_d4(byte & 0b10000000);
+    }
+    if(device == Device_PCBRGB) {
+      send_bit_d6(byte & 0b10000000);
+    }
+    byte <<= 1;
+  }
+}
+
+void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device)
+{
+  send_value(g, device);
+  send_value(r, device);
+  send_value(b, device);
+}

keyboards/duck/jetfire/backlight_led.h

@@ -0,0 +1,18 @@
+#ifndef BACKLIGHT_LED_H
+#define BACKLIGHT_LED_H
+
+enum Device {
+  Device_PCBRGB,
+  Device_STATELED
+};
+
+void backlight_init_ports(void);
+void backlight_set_state(bool cfg[7]);
+void backlight_update_state(void);
+void backlight_toggle_rgb(bool enabled);
+void backlight_set_rgb(uint8_t cfg[17][3]);
+void backlight_set(uint8_t level);
+void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device);
+void show(void);
+
+#endif

keyboards/duck/jetfire/config.h

@@ -0,0 +1,200 @@
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Duck
+#define PRODUCT         Jetfire
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 20
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+
+#define BACKLIGHT_LEVELS 1
+
+#define RGB_DI_PIN D6
+// #ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 23
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/duck/jetfire/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "Jetfire", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 20.5, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"x":15.25, "y":0}, {"label":"PrtSc", "x":16.5, "y":0}, {"label":"Scroll Lock", "x":17.5, "y":0}, {"label":"Pause", "x":18.5, "y":0}, {"x":19.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Num Lock", "x":16.5, "y":1.25}, {"label":"/", "x":17.5, "y":1.25}, {"label":"*", "x":18.5, "y":1.25}, {"label":"-", "x":19.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"7", "x":16.5, "y":2.25}, {"label":"8", "x":17.5, "y":2.25}, {"label":"9", "x":18.5, "y":2.25}, {"label":"+", "x":19.5, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":16.5, "y":3.25}, {"label":"5", "x":17.5, "y":3.25}, {"label":"6", "x":18.5, "y":3.25}, {"x":19.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"label":"1", "x":16.5, "y":4.25}, {"label":"2", "x":17.5, "y":4.25}, {"label":"3", "x":18.5, "y":4.25}, {"label":"Enter", "x":19.5, "y":4.25}, {"label":"\u2191", "x":15.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25}, {"label":"Menu", "x":12, "y":5.25}, {"x":13, "y":5.25}, {"label":"0", "x":17.5, "y":5.25}, {"label":".", "x":18.5, "y":5.25}, {"x":19.5, "y":5.25}, {"label":"\u2190", "x":14.25, "y":5.5}, {"label":"\u2193", "x":15.25, "y":5.5}, {"label":"\u2192", "x":16.25, "y":5.5}]
+        },
+
+        "LAYOUT": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"x":15.25, "y":0}, {"label":"PrtSc", "x":16.5, "y":0}, {"label":"Scroll Lock", "x":17.5, "y":0}, {"label":"Pause", "x":18.5, "y":0}, {"x":19.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Num Lock", "x":16.5, "y":1.25}, {"label":"/", "x":17.5, "y":1.25}, {"label":"*", "x":18.5, "y":1.25}, {"label":"-", "x":19.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"7", "x":16.5, "y":2.25}, {"label":"8", "x":17.5, "y":2.25}, {"label":"9", "x":18.5, "y":2.25}, {"label":"+", "x":19.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":16.5, "y":3.25}, {"label":"5", "x":17.5, "y":3.25}, {"label":"6", "x":18.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"1", "x":16.5, "y":4.25}, {"label":"2", "x":17.5, "y":4.25}, {"label":"3", "x":18.5, "y":4.25}, {"label":"Enter", "x":19.5, "y":4.25, "h":2}, {"label":"\u2191", "x":15.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25, "w":1.5}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.5}, {"label":"0", "x":17.5, "y":5.25}, {"label":".", "x":18.5, "y":5.25}, {"label":"\u2190", "x":14.25, "y":5.5}, {"label":"\u2193", "x":15.25, "y":5.5}, {"label":"\u2192", "x":16.25, "y":5.5}]
+        }
+    }
+}

keyboards/duck/jetfire/jetfire.c

@@ -0,0 +1,171 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "jetfire.h"
+#include "backlight_led.h"
+
+enum backlight_level {
+    BACKLIGHT_ALPHA    = 0b0000001,
+    BACKLIGHT_MOD      = 0b0000010,
+    BACKLIGHT_FROW     = 0b0000100,
+    BACKLIGHT_NUMBLOCK = 0b0001000,
+    BACKLIGHT_RGB      = 0b0010000,
+    BACKLIGHT_SWITCH   = 0b0001111
+};
+
+enum StateLed {
+    STATE_LED_SCROLL_LOCK,
+    STATE_LED_CAPS_LOCK,
+    STATE_LED_NUM_LOCK,
+    STATE_LED_LAYER_0,
+    STATE_LED_LAYER_1,
+    STATE_LED_LAYER_2,
+    STATE_LED_LAYER_3,
+    STATE_LED_LAYER_4
+};
+
+uint8_t backlight_rgb_r = 255;
+uint8_t backlight_rgb_g = 0;
+uint8_t backlight_rgb_b = 0;
+uint8_t backlight_state_led = 1<<STATE_LED_LAYER_0;
+
+
+void backlight_toggle_rgb(bool enabled)
+{
+  if(enabled) {
+    uint8_t rgb[RGBLED_NUM][3] = {
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+      {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}
+    };
+    backlight_set_rgb(rgb);
+  } else {
+    uint8_t rgb[RGBLED_NUM][3] = {
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0},
+      {0, 0, 0}
+    };
+    backlight_set_rgb(rgb);
+  }
+}
+
+void backlight_set_rgb(uint8_t cfg[RGBLED_NUM][3])
+{
+  cli();
+  for(uint8_t i = 0; i < RGBLED_NUM; ++i) {
+    send_color(cfg[i][0], cfg[i][1], cfg[i][2], Device_PCBRGB);
+  }
+  sei();
+  show();
+}
+
+
+void backlight_set(uint8_t level)
+{
+  level & BACKLIGHT_ALPHA    ? (PORTB |= 0b00000010) : (PORTB &= ~0b00000010);
+  level & BACKLIGHT_MOD      ? (PORTB |= 0b00000100) : (PORTB &= ~0b00000100);
+  level & BACKLIGHT_FROW     ? (PORTB |= 0b00001000) : (PORTB &= ~0b00001000);
+  level & BACKLIGHT_NUMBLOCK ? (PORTE |= 0b01000000) : (PORTE &= ~0b01000000);
+  backlight_toggle_rgb(level & BACKLIGHT_RGB);
+}
+
+
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+
+void backlight_update_state()
+{
+  cli();
+  send_color(backlight_state_led & (1<<STATE_LED_SCROLL_LOCK) ? 255 : 0,
+             backlight_state_led & (1<<STATE_LED_CAPS_LOCK) ? 255 : 0,
+             backlight_state_led & (1<<STATE_LED_NUM_LOCK) ? 255 : 0,
+             Device_STATELED);
+  send_color(backlight_state_led & (1<<STATE_LED_LAYER_1) ? 255 : 0,
+             backlight_state_led & (1<<STATE_LED_LAYER_2) ? 255 : 0,
+             backlight_state_led & (1<<STATE_LED_LAYER_0) ? 255 : 0,
+             Device_STATELED);
+  send_color(backlight_state_led & (1<<STATE_LED_LAYER_4) ? 255 : 0,
+             backlight_state_led & (1<<STATE_LED_LAYER_3) ? 255 : 0,
+             0,
+             Device_STATELED);
+  sei();
+  show();
+}
+
+void led_set_kb(uint8_t usb_led)
+{
+  if(usb_led & (1<<USB_LED_CAPS_LOCK)) {
+    backlight_state_led |=   1<<STATE_LED_CAPS_LOCK;
+  } else {
+    backlight_state_led &= ~(1<<STATE_LED_CAPS_LOCK);
+  }
+  if(usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+    backlight_state_led |=   1<<STATE_LED_SCROLL_LOCK;
+  } else {
+    backlight_state_led &= ~(1<<STATE_LED_SCROLL_LOCK);
+  }
+  if(usb_led & (1<<USB_LED_NUM_LOCK)) {
+    backlight_state_led |=   1<<STATE_LED_NUM_LOCK;
+  } else {
+    backlight_state_led &= ~(1<<STATE_LED_NUM_LOCK);
+  }
+  backlight_update_state();
+}

keyboards/duck/jetfire/jetfire.h

@@ -0,0 +1,60 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef JETFIRE_H
+#define JETFIRE_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments representing the physical
+// layout of the board and position of the keys
+// The second converts the arguments into a two-dimensional array which
+// represents the switch matrix.
+
+#define LAYOUT_all( \
+    K5A,      K5C, K5D, K5E, K5F,      K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T, \
+    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, K4S, K4T, \
+    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M,      K3O, K3P, K3Q, K3R, K3S, K3T, \
+    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L,           K2O,      K2Q, K2R, K2S, K2T, \
+    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K,      K1M, K1N, K1O, K1P, K1Q, K1R, K1S, K1T, \
+    K0A, K0B, K0C,                          K0I,           K0L, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, K0T  \
+) { \
+  { K5A, KC_NO,    K5C, K5D, K5E, K5F, KC_NO,     K5H, K5I, K5J,   K5K,  K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T }, \
+  { K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I,  K4J, K4K, K4L,   K4M,  K4N,    K4O, K4P, K4Q, K4R, K4S, K4T }, \
+  { K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I,  K3J, K3K, K3L,   K3M,  KC_NO,    K3O, K3P, K3Q, K3R, K3S, K3T }, \
+  { K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I,  K2J, K2K, K2L,   KC_NO,     KC_NO,    K2O, KC_NO,    K2Q, K2R, K2S, K2T    }, \
+  { K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I,  K1J, K1K, KC_NO, K1M,  K1N, K1O,    K1P, K1Q, K1R, K1S, K1T }, \
+  { K0A, K0B, K0C, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, K0I, KC_NO,KC_NO, K0L, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, K0T    }  \
+}
+
+#define LAYOUT( \
+    K5A,      K5C, K5D, K5E, K5F,      K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T, \
+    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M,      K4O, K4P, K4Q, K4R, K4S, K4T, \
+    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M,      K3O, K3P, K3Q, K3R, K3S, K3T, \
+    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L,           K2O,      K2Q, K2R, K2S,      \
+    K1A,      K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K,      K1M, K1N,      K1P, K1Q, K1R, K1S, K1T, \
+    K0A, K0B, K0C,                          K0I,                K0M, K0N, K0O, K0P, K0Q, K0R, K0S       \
+) { \
+  { K5A, KC_NO,    K5C, K5D, K5E, K5F, KC_NO,    K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T }, \
+  { K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, KC_NO,    K4O, K4P, K4Q, K4R, K4S, K4T }, \
+  { K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, KC_NO,    K3O, K3P, K3Q, K3R, K3S, K3T }, \
+  { K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, KC_NO,    KC_NO,    K2O, KC_NO,    K2Q, K2R, K2S, KC_NO    }, \
+  { K1A, KC_NO,    K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, KC_NO,    K1M, K1N, KC_NO,    K1P, K1Q, K1R, K1S, K1T }, \
+  { K0A, K0B, K0C, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, K0I, KC_NO,KC_NO,KC_NO, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, KC_NO    }  \
+}
+
+#endif

keyboards/duck/jetfire/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/duck/jetfire/keymaps/default/keymap.c

@@ -0,0 +1,59 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  // layer 0: qwerty
+  [0] = LAYOUT(\
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,  KC_F4, KC_F5, KC_F6,  KC_F7, KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  RGB_MOD, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGUP,
+    KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,  KC_5,  KC_6,   KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,  KC_T,  KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,  KC_G,  KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_P4,   KC_P5,   KC_P6,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,   KC_V,  KC_B,  KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_LCTL, KC_LGUI, KC_LALT,                       KC_SPC,                 KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_COMM),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/duck/jetfire/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for jetfire

keyboards/duck/jetfire/matrix.c

@@ -0,0 +1,277 @@
+/*
+Copyright 2016 Ralf Schmitt <ralf@bunkertor.net>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(uint8_t col);
+static void init_ports(void);
+static void unselect_cols(void);
+static void select_col(uint8_t col);
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void backlight_init_ports(void)
+{
+  DDRD  |=  0b01010000;
+  PORTD &=  0b10101111;
+  DDRB  |=  0b00001110;
+  PORTB &=  0b11110001;
+  DDRE  |=  0b01000000;
+  PORTE &=  0b10111111;
+}
+
+void matrix_init(void)
+{
+    backlight_init_ports();
+    unselect_cols();
+    init_ports();
+    for (uint8_t i=0; i < MATRIX_ROWS; i++)  {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+        select_col(col);
+        _delay_us(3);
+        uint8_t rows = read_rows(col);
+        for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+            bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+            bool curr_bit = rows & (1<<row);
+            if (prev_bit != curr_bit) {
+                matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+                if (debouncing) {
+                    dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
+                }
+                debouncing = DEBOUNCING_DELAY;
+            }
+        }
+        unselect_cols();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop32(matrix[i]);
+    }
+    return count;
+}
+
+static void init_ports(void)
+{
+    // Rows are inputs (inputs are 0)
+    DDRD  &= 0b11010000;
+    DDRB  &= 0b01111111;
+    DDRE  &= 0b11111011;
+
+    // Columns are outputs (outputs are high)
+    DDRF  |= 0b00000011;
+    DDRC  |= 0b11000000;
+    DDRB  |= 0b01110001;
+    DDRD  |= 0b10000000;
+}
+
+static uint8_t read_rows(uint8_t col)
+{
+  if(col == 15) {
+    return (PINE&(1<<2) ? 0 : (1<<0)) |
+           (PIND&(1<<0) ? (1<<1) : 0) |
+           (PIND&(1<<1) ? (1<<2) : 0) |
+           (PIND&(1<<2) ? (1<<3) : 0) |
+           (PIND&(1<<3) ? (1<<4) : 0) |
+           (PIND&(1<<5) ? (1<<5) : 0);
+
+  } else {
+    return (PINB&(1<<7) ? (1<<0) : 0) |
+           (PIND&(1<<0) ? (1<<1) : 0) |
+           (PIND&(1<<1) ? (1<<2) : 0) |
+           (PIND&(1<<2) ? (1<<3) : 0) |
+           (PIND&(1<<3) ? (1<<4) : 0) |
+           (PIND&(1<<5) ? (1<<5) : 0);
+
+  }
+}
+
+static void unselect_cols(void)
+{
+    PORTF &= 0b11111100;
+    PORTC &= 0b00111111;
+    PORTB &= 0b10001110;
+    PORTD &= 0b01111111;
+}
+
+static void select_col(uint8_t col)
+{
+    switch (col) {
+        case 0:
+            PORTC |= 0b01000000;
+            break;
+        case 1:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 2:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 3:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 4:
+            PORTC |= 0b11000000;
+            break;
+        case 5:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000001;
+            break;
+        case 6:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000010;
+            break;
+        case 7:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000011;
+            break;
+        case 8:
+            PORTB |= 0b01000000;
+            break;
+        case 9:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 10:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 11:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 12:
+            PORTB |= 0b01000000;
+            PORTC |= 0b10000000;
+            break;
+        case 13:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000001;
+            PORTC |= 0b10000000;
+            break;
+        case 14:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000010;
+            PORTC |= 0b10000000;
+            break;
+        case 15:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000011;
+            PORTC |= 0b10000000;
+            break;
+        case 16:
+            PORTB |= 0b00100000;
+            break;
+        case 17:
+            PORTB |= 0b00010000;
+            break;
+        case 18:
+            PORTD |= 0b10000000;
+            break;
+        case 19:
+            PORTB |= 0b00000001;
+            break;
+    }
+}

keyboards/duck/jetfire/readme.md

@@ -0,0 +1,18 @@
+# Jetfire
+
+![jetfire](imgur.com image replace me!)
+
+The Duck Jetfire is a hybrid full size and 1800 layout keyboard that went on 
+Group Buy in November 2017. 
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Duck Jetfire PCB    
+Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=92708.0)
+
+To get into bootloader mode, hold the top top most key above the 2 navigation keys while connecting the USB cable. 
+
+Make example for this keyboard (after setting up your build environment):
+
+    make duck/jetfire:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.