Update keyboards/subatomic/config.h

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

.gitignore

@@ -60,8 +60,8 @@ util/Win_Check_Output.txt
 
 # ignore image files
 *.png
-*.jpg
 *.gif
+*.jpg
 
 # Do not ignore MiniDox left/right hand eeprom files
 !keyboards/minidox/*.eep

common_features.mk

@@ -112,7 +112,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
     else
-        SRC += ws2812.c
+        WS2812_DRIVER_REQUIRED = yes
     endif
 endif
 
@@ -176,7 +176,7 @@ endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812)
     OPT_DEFS += -DWS2812
-    SRC += ws2812.c
+    WS2812_DRIVER_REQUIRED = yes
 endif
 
 ifeq ($(strip $(RGB_MATRIX_CUSTOM_KB)), yes)
@@ -262,6 +262,26 @@ ifneq ($(strip $(BACKLIGHT_ENABLE)), no)
     endif
 endif
 
+VALID_WS2812_DRIVER_TYPES := bitbang pwm spi i2c
+
+WS2812_DRIVER ?= bitbang
+ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
+    ifeq ($(filter $(WS2812_DRIVER),$(VALID_WS2812_DRIVER_TYPES)),)
+        $(error WS2812_DRIVER="$(WS2812_DRIVER)" is not a valid WS2812 driver)
+    endif
+
+    ifeq ($(strip $(WS2812_DRIVER)), bitbang)
+        SRC += ws2812.c
+    else
+        SRC += ws2812_$(strip $(WS2812_DRIVER)).c
+    endif
+
+    # add extra deps
+    ifeq ($(strip $(WS2812_DRIVER)), i2c)
+        QUANTUM_LIB_SRC += i2c_master.c
+    endif
+endif
+
 ifeq ($(strip $(CIE1931_CURVE)), yes)
     OPT_DEFS += -DUSE_CIE1931_CURVE
     LED_TABLES = yes

docs/_langs.md

@@ -2,3 +2,4 @@
   - [:uk: English](/)
   - [:cn: 中文](/zh-cn/)
   - [:fr: Français](/fr-fr/)
+  - [:ru: Русский](/ru-ru/)

docs/_summary.md

@@ -98,6 +98,7 @@
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
   * [I2C Driver](i2c_driver.md)
+  * [WS2812 Driver](ws2812_driver.md)
   * [GPIO Controls](internals_gpio_control.md)
   * [Proton C Conversion](proton_c_conversion.md)
 

docs/cli.md

@@ -69,6 +69,16 @@ There are some limitations to the local CLI compared to the global CLI:
 
 # CLI Commands
 
+## `qmk cformat`
+
+This command formats C code using clang-format. Run it with no arguments to format all core code, or pass filenames on the command line to run it on specific files.
+
+**Usage**:
+
+```
+qmk cformat [file1] [file2] [...] [fileN]
+```
+
 ## `qmk compile`
 
 This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm> or compile keymaps in the repo.
@@ -85,16 +95,6 @@ qmk compile <configuratorExport.json>
 qmk compile -kb <keyboard_name> -km <keymap_name>
 ```
 
-## `qmk cformat`
-
-This command formats C code using clang-format. Run it with no arguments to format all core code, or pass filenames on the command line to run it on specific files.
-
-**Usage**:
-
-```
-qmk cformat [file1] [file2] [...] [fileN]
-```
-
 ## `qmk config`
 
 This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
@@ -125,6 +125,16 @@ This command examines your environment and alerts you to potential build or flas
 qmk doctor
 ```
 
+## `qmk json-keymap`
+
+Creates a keymap.c from a QMK Configurator export.
+
+**Usage**:
+
+```
+qmk json-keymap [-o OUTPUT] filename
+```
+
 ## `qmk list-keyboards`
 
 This command lists all the keyboards currently defined in `qmk_firmware`

docs/de/cli.md

@@ -0,0 +1,169 @@
+# QMK CLI (Kommandozeile)
+
+Diese Seite beschreibt die Einrichtung und den Umgang mit dem QMK CLI (Kommandozeile).
+
+# Übersicht
+
+Die QMK CLI vereinfacht das Zusammenbauen und Arbeiten mit QMK Tastaturen. Hier findest Du wichtige Befehle, um beispielsweise das Herunterladen und Kompilieren der QMK Firmware oder das Erstellen von Tastaturbelegungen (und vieles mehr) zu erleichtern.
+
+* [Globale CLI](#globale-cli)
+* [Lokale CLI](#lokale-cli)
+* [CLI-Befehle](#cli-befehle)
+
+# System-Anforderungen
+
+Die CLI benötigt Python 3.5 oder höher. Außerdem ist es nötig, die Packages laut [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt) zu installieren.
+
+# Globale CLI
+
+QMK bietet ein installierbares CLI, das Du zum Einrichten Deiner QMK Build-Umgebung verwenden kannst. Dieses ermöglicht Dir das Arbeiten mit QMK, und erleichtert das Arbeiten mit mehreren Kopien der `qmk_firmware`. Wir empfehlen, dieses CLI zu installieren und regelmäßig upzudaten.
+
+## Installation mit Homebrew (macOS, manche Linux)
+
+Solltest Du [Homebrew](https://brew.sh) installiert haben, kannst Du QMK per tap installieren:
+
+```
+brew tap qmk/qmk
+brew install qmk
+export QMK_HOME='~/qmk_firmware' # Optional: setzt den Installationsort für `qmk_firmware`
+qmk setup  # Dies klont `qmk/qmk_firmware` und richtet optional auch Deine Build-Umgebung ein
+```
+
+## Installation mit easy_install oder pip
+
+Falls Du kein Homebrew hast, kannst Du QMK auch manuell installieren. Zuerst musst Du sicherstellen, dass Python 3.5 (oder höher) und pip installiert ist. Dann installiere QMK mit diesem Befehl:
+
+```
+pip3 install qmk
+export QMK_HOME='~/qmk_firmware' # Optional: setzt den Installationsort für `qmk_firmware`
+qmk setup  # Dies klont `qmk/qmk_firmware` und richtet optional auch Deine Build-Umgebung ein
+```
+## Installation mit git Repo
+
+`git clone https://github.com/qmk/qmk_cli.git && cd qmk_cli && python3 setup.py install`
+
+## Packaging für andere Betriebssysteme
+
+Wir suchen nach Freiwilligen, die ein `qmk`-Package für weitere Betriebssysteme erstellen und pflegen. Falls Du ein Package für Dein OS erstellen möchtest, bitte befolge diese Richtlinien:
+
+* Verwende "Best Practices" für Dein OS, sollten sie mit diesen Richtlinien in Konflikt stehen.
+    * Dokumentiere den Grund in einem Kommentar, wenn Du abweichen musstest.
+* Installiere mit einem [virtualenv](https://virtualenv.pypa.io/en/latest/).
+* Weise den User an, die Umgebungs-Variable `QMK_HOME` zu setzen, um die Firmware-Quelle anders einzustellen als `~/qmk_firmware`.
+
+# Lokale CLI
+
+Wenn Du die globale CLI nicht verwenden möchtest, beinhaltet `qmk_firmware` auch eine lokale CLI. Du kannst sie hier finden: `qmk_firmware/bin/qmk`. Du kannst den `qmk`-Befehl aus irgendeinem Datei-Verzeichnis ausführen und es wird immer auf dieser Kopie von `qmk_firmware` arbeiten.
+
+**Beispiel**:
+
+```
+$ ~/qmk_firmware/bin/qmk hello
+Ψ Hello, World!
+```
+
+## Einschränkungen der lokalen CLI
+
+Hier ein Vergleich mit der globalen CLI:
+
+* Die lokale CLI unterstützt kein `qmk setup` oder `qmk clone`.
+* Die lokale CLI arbeitet immer innerhalb der selben `qmk_firmware`-Verzeichnisstruktur, auch wenn Du mehrere Repositories geklont hast.
+* Die lokale CLI läuft nicht in einer virtualenv. Daher ist es möglich, dass Abhängigkeiten (dependencies) miteinander in Konflikt kommen/stehen.
+
+# CLI-Befehle
+
+## `qmk compile`
+
+Dieser Befehl erlaubt es dir, die Firmware - aus egal welchem Datei-Verzeichnis - zu compilen. Du kannst JSON-Exporte von <https://config.qmk.fm> oder Keymaps in der Repo kompilen.
+
+**Anwendung für Konfigurations-Exports**:
+
+```
+qmk compile <configuratorExport.json>
+```
+
+**Anwendung für Keymaps**:
+
+```
+qmk compile -kb <keyboard_name> -km <keymap_name>
+```
+
+## `qmk cformat`
+
+Dieser Befehl formatiert C-Code im clang-Format. Benutze ihn ohne Argumente, um den core-Code zu formatieren, oder benutze Namen von Dateien in der CLI, um den Befehl auf bestimmte Dateien anzuwenden.
+
+**Anwendung**:
+
+```
+qmk cformat [file1] [file2] [...] [fileN]
+```
+
+## `qmk config`
+
+Dieser Befehl konfiguriert das Verhalten von QMK. Für die volle `qmk config`-Dokumentation gehe zu [CLI-Konfiguration](cli_configuration.md).
+
+**Anwendung**:
+
+```
+qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
+```
+
+## `qmk docs`
+
+Dieser Befehl startet einen lokalen HTTP-Server, den Du zum Browsen oder Verbessern der Dokumentation verwenden kannst. Der Default-Port ist 8936.
+
+**Anwendung**:
+
+```
+qmk docs [-p PORT]
+```
+
+## `qmk doctor`
+
+Dieser Befehl untersucht Deine Umgebung und warnt Dich vor potentiellen Build- oder Flash-Problemen.
+
+**Anwendung**:
+
+```
+qmk doctor
+```
+
+## `qmk list-keyboards`
+
+Dieser Befehl listet alle zurzeit in `qmk_firmware` definierten Tastaturen/Keyboards auf.
+
+**Anwendung**:
+
+```
+qmk list-keyboards
+```
+
+## `qmk new-keymap`
+
+Dieser Befehl erstellt eine neue Keymap basierend auf einer existierenden Standard-Keymap eines bestimmten Keyboards.
+
+**Anwendung**:
+
+```
+qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
+```
+
+## `qmk pyformat`
+
+Dieser Befehl formatiert Python-Code in `qmk_firmware`.
+
+**Anwendung**:
+
+```
+qmk pyformat
+```
+
+## `qmk pytest`
+
+Dieser Befehl führt die Python Test Suite aus. Wenn Du Python-Code veränderst, solltest Du sicherstellen, dass der Test erfolgreich ausgeführt wurde.
+
+**Anwendung**:
+
+```
+qmk pytest
+```

docs/faq_keymap.md

@@ -95,13 +95,6 @@ Even worse, it is not recognized unless the keyboard's VID and PID match that of
 
 See [this issue](https://github.com/qmk/qmk_firmware/issues/2179) for detailed information.
 
-
-## Media Control Keys in Mac OSX
-#### KC_MNXT and KC_MPRV Does Not Work on Mac
-Use `KC_MFFD`(`KC_MEDIA_FAST_FORWARD`) and `KC_MRWD`(`KC_MEDIA_REWIND`) instead of `KC_MNXT` and `KC_MPRV`.
-See https://github.com/tmk/tmk_keyboard/issues/195
-
-
 ## Keys Supported in Mac OSX?
 You can know which keycodes are supported in OSX from this source code.
 

docs/feature_bluetooth.md

@@ -2,18 +2,18 @@
 
 ## Bluetooth Known Supported Hardware
 
-Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1 Qmk has support for RN-42 HID Firmware and Bluefruit EZ Key the later of which is not produced anymore. For more recent BLE protocols currently only the Adafruit Bluefruit SPI friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support Mouse Input.
+Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1, QMK has support for RN-42 modules and the Bluefruit EZ-Key, the latter of which is not produced anymore. For more recent BLE protocols, currently only the Adafruit Bluefruit SPI Friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support mouse input.
 
-|Board                                                           |Bluetooth Protocol          |Connection Type |Rules.mk                   |Bluetooth Chip|
+|Board                                                           |Bluetooth Protocol          |Connection Type |rules.mk                   |Bluetooth Chip|
 |----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
-|[Adafruit EzKey HID]("https://www.adafruit.com/product/1535")   |Bluetooth Classic           | UART           | BLUETOOTH = AdafruitEZKey |              |
-|Rover Networks RN-42 (Sparkfun Bluesmirf)                       |Bluetooth Classic           | UART           | BLUETOOTH = RN42          | RN-42        |
-|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy        | SPI            | BLUETOOTH = AdafruitBLE   | nRF5182      |
+|[Adafruit EZ-Key HID](https://www.adafruit.com/product/1535)   |Bluetooth Classic           | UART           |`BLUETOOTH = AdafruitEZKey` |              |
+|Roving Networks RN-42 (Sparkfun Bluesmirf)                       |Bluetooth Classic           | UART           |`BLUETOOTH = RN42`          | RN-42        |
+|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy        | SPI            |`BLUETOOTH = AdafruitBLE`   | nRF51822      |
 
 Not Supported Yet but possible:
 * [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514)
 * HC-05 boards flashed with RN-42 firmware. They apparently both use the CSR BC417 Chip. Flashing it with RN-42 firmware gives it HID capability.
-* [Sparkfun Bluetooth mate](https://www.sparkfun.com/products/14839)
+* Sparkfun Bluetooth Mate
 * HM-13 based boards
 
 ### Adafruit BLE SPI Friend

docs/feature_encoders.md

@@ -58,3 +58,11 @@ or `keymap.c`:
 ## Hardware
 
 The A an B lines of the encoders should be wired directly to the MCU, and the C/common lines should be wired to ground.
+
+## Encoder matrix
+
+You can also wire the C/common line through a diode (arrow towards the row) to each of the rows (or reading pin) in your matrix, and use as many encoders as you have rows (multiplied by the number of A/B lines you have hooked up). To do this, you can add this line to your `config.h` with all of the pins you use:
+
+```c
+#define ENCODERS_PAD_C { encoder1c, encoder2c }
+```

docs/feature_split_keyboard.md

@@ -47,7 +47,7 @@ The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and D0 (aka PDO or p
 
 The 4 wires of the TRRS cable need to connect GND, VCC, and SCL and SDA (aka PD0/pin 3 and PD1/pin 2, respectively) between the two Pro Micros. 
 
-The pull-up resistors may be placed on either half. It is also possible to use 4 resistors and have the pull-ups in both halves, but this is unnecessary in simple use cases.
+The pull-up resistors may be placed on either half. If you wish to use the halves independently, it is also possible to use 4 resistors and have the pull-ups in both halves.
 
 ![I2C wiring](https://i.imgur.com/Hbzhc6E.png)
 

docs/feature_userspace.md

@@ -211,15 +211,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             if ( (temp_mod | temp_osm) & MOD_MASK_SHIFT ) 
     #endif
             { // 
-                #if defined(__arm__)  // only run for ARM boards
-                    SEND_STRING(":dfu-util");
-                #elif defined(BOOTLOADER_DFU) // only run for DFU boards
-                    SEND_STRING(":dfu");
-                #elif defined(BOOTLOADER_HALFKAY) // only run for teensy boards
-                    SEND_STRING(":teensy");
-                #elif defined(BOOTLOADER_CATERINA) // only run for Pro Micros
-                    SEND_STRING(":avrdude");
-                #endif // bootloader options
+                SEND_STRING(":flash");
             }
             if ( (temp_mod | temp_osm) & MOD_MASK_CTRL) { 
                 SEND_STRING(" -j8 --output-sync"); 
@@ -244,7 +236,7 @@ endif
 
 This will add a new `KC_MAKE` keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap>`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
 
-Also, holding `shift` will add the appropriate flashing command (`:dfu`, `:teensy`, `:avrdude`, `:dfu-util`) for a majority of keyboards.  Holding `control` will add some commands that will speed up compiling time by processing multiple files at once. 
+Also, holding Shift will add the flash target (`:flash`) to the command.  Holding Control will add some commands that will speed up compiling time by processing multiple files at once. 
 
 And for the boards that lack a shift key, or that you want to always attempt the flashing part, you can add `FLASH_BOOTLOADER = yes` to the `rules.mk` of that keymap.
 

docs/flashing.md

@@ -99,11 +99,16 @@ or
 
     make <keyboard>:<keymap>:avrdude
 
-or if you want to flash multiple boards, use the following command
 
-    make <keyboard>:<keymap>:avrdude-loop
+#### Caterina commands
+
+There are a number of DFU commands that you can use to flash firmware to a DFU device:
+
+* `:avrdude` - This is the normal option which waits until a Caterina device is available (by detecting a new COM port), and then flashes the firmware.
+* `:avrdude-loop` - This runs the same command as `:avrdude`, but after each device is flashed, it will attempt to flash again.  This is useful for bulk flashing. _This requires you to manually escape the loop by hitting Ctrl+C._
+* `:avrdude-split-left` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._
+* `:avrdude-split-right` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._
 
-When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
 
 
 ## Halfkay
@@ -231,7 +236,7 @@ Flashing sequence:
 
 There are a number of DFU commands that you can use to flash firmware to a STM32 device:
 
-* `:dfu-util` - The default command for flashing to STM32 devices.
+* `:dfu-util` - The default command for flashing to STM32 devices, and will wait until an STM32 bootloader device is present.
 * `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards.
 * `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards.
 * `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 

docs/fr-FR/ChangeLog/20190830.md

@@ -6,9 +6,9 @@ Ce document présente les fusions de Breaking Change. Voici la liste des changem
 
 ## Formattage de code Core avec clang-format
 
-* Tous les fichiers core (`drivers/`, `quantum/`, `tests/`, et `tmk_core/`) seront formattés avec clang-format
+* Tous les fichiers core (`drivers/`, `quantum/`, `tests/`, et `tmk_core/`) seront formatés avec clang-format
 * Un processus travis pour reformatter les PRs lors de la fusion a été mis en place
-* Vous pouvez utiliser la nouvelle commande CLI `qmk cformat` afin de formatter avant de soumettre votre PR si vous le souhaitez.
+* Vous pouvez utiliser la nouvelle commande CLI `qmk cformat` afin de formater avant de soumettre votre PR si vous le souhaitez.
 
 ## Nettoyage des descripteurs LUFA USB
 

docs/fr-FR/README.md

@@ -7,7 +7,7 @@
 [![Contributeurs Github](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
 [![Forks Github](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
 
-## Qu'est ce que QMK Firmware ?
+## Qu'est-ce que QMK Firmware ?
 
 QMK (*Quantum Mechanical Keyboard*) est une communauté open source qui maintient le firmware QMK, la QMK Toolbox (*Boite à outil*), qmk.fm et leurs documentations. QMK Firmware est un firmware dédié aux claviers qui est basé sur [tmk\_keyboard](http://github.com/tmk/tmk_keyboard). Il offre des fonctionnalités très utiles pour les contrôleurs Atmel AVR, et, plus spécifiquement pour [les produits d'OLKB](http://olkb.com), le clavier [ErgoDox EZ](http://www.ergodox-ez.com), et pour les [produits Clueboard](http://clueboard.co/). Il prend désormais aussi en charge les processeurs ARM qui utilisent ChibiOS. Vous pouvez l'utiliser pour contrôler un clavier personnalisé soudé à la main ou alors sur un clavier avec un PCB personnalisé.
 
@@ -23,7 +23,7 @@ Avant d'être prêt à compiler vous allez devoir [installer un environnement](g
 
     make planck/rev4:default
 
-Cette commande compilera la révision `rev4` du clavier `planck` avec la disposition `default`. Notez que tous les claviers n'ont pas forcément de révisions (aussi appelées sous-projects ou dossiers, ou en en Anglais « subprojects » ou « folder »). Cette option peut donc être omise :
+Cette commande compilera la révision `rev4` du clavier `planck` avec la disposition `default`. Notez que tous les claviers n'ont pas forcément de révisions (aussi appelées sous-projects ou dossiers, ou en anglais « subprojects » ou « folder »). Cette option peut donc être omise :
 
     make preonic:default
 

docs/fr-FR/breaking_changes.md

@@ -23,7 +23,7 @@ Le prochain Breaking Change est planifié pour le 29 novembre.
 
 ## Quels changements seront inclus?
 
-Pour voir une liste de candidats de breaking changes, vous pouvez regardez la liste des [labels `breaking_change`](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+label%3Abreaking_change+is%3Apr). De nouveaux changements peuvent être ajoutés entre maintenant et lorsque `future` est fermée, et un PR avec ce label n'est pas garanti d'être fusionné.
+Pour voir une liste de candidats de breaking changes, vous pouvez regarder la liste des [labels `breaking_change`](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+label%3Abreaking_change+is%3Apr). De nouveaux changements peuvent être ajoutés entre maintenant et lorsque `future` est fermée, et un PR avec ce label n'est pas garanti d'être fusionné.
 
 Si vous souhaitez que votre breaking change soit inclus dans ce tour, vous devez créer un PR avec le label `breaking_change` et faire en sorte qu'il soit accepté avant que `future` ne soit fermé. Une fois `future` fermé, aucun nouveau breaking change sera accepté.
 

docs/fr-FR/cli.md

@@ -4,7 +4,7 @@ Cette page décrit comment configurer et utiliser la CLI QMK.
 
 # Vue d'ensemble
 
-La CLI de QMK permet de simplifier la compilation et l'intéraction avec les clavier QMK. Nous avons définis plusieurs commandes pour simplifier et rationaliser les tâches telles qu'obtenir et compiler le firmware QMK, créer de nouvelles keymaps, et plus.
+La CLI de QMK permet de simplifier la compilation et l'interaction avec les claviers QMK. Nous avons défini plusieurs commandes pour simplifier et rationaliser les tâches telles qu'obtenir et compiler le firmware QMK, créer de nouvelles keymaps, et plus.
 
 * [CLI globale](#global-cli)
 * [CLI locale](#local-cli)
@@ -127,7 +127,7 @@ qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
 
 ## `qmk pyformat`
 
-Cette commande formatte le code python dans `qmk_firmware`.
+Cette commande formate le code python dans `qmk_firmware`.
 
 **Utilisation**:
 
@@ -137,7 +137,7 @@ qmk pyformat
 
 ## `qmk pytest`
 
-Cette commande démarre la suite de test python. Si vous faites des changements dans le code Python, assurez vous que les tests se lancent avec succès.
+Cette commande démarre la suite de test python. Si vous faites des changements dans le code Python, assurez-vous que les tests se lancent avec succès.
 
 **Utilisation**:
 

docs/fr-FR/cli_configuration.md

@@ -41,7 +41,7 @@ user.keymap: None -> default
 
 # CLI Documentation (`qmk config`)
 
-La commande `qmk config` est utilisée pour intéragir avec la configuration sous-jacente. Lancée sans argument, elle affiche la configuration courante. Lorsque des arguments sont définis, ils sont considérés comme étant des jetons de configuration, qui sont des chaînes de caractère ne contenant aucun espace avec le format suivant:
+La commande `qmk config` est utilisée pour interagir avec la configuration sous-jacente. Lancée sans argument, elle affiche la configuration courante. Lorsque des arguments sont définis, ils sont considérés comme étant des jetons de configuration, qui sont des chaînes de caractère ne contenant aucun espace avec le format suivant:
 
     <subcommand|general|default>[.<key>][=<value>]
 
@@ -91,7 +91,7 @@ default.keymap: default -> None
 
 ## Plusieurs opérations
 
-Vous pouvez combiner plusieures opérations d'écriture et de lecture en une seule commande. Elle seront exécutées et affichées dans l'ordre:
+Vous pouvez combiner plusieurs opérations d'écriture et de lecture en une seule commande. Elles seront exécutées et affichées dans l'ordre:
 
 ```
 $ qmk config compile default.keymap=default compile.keymap=None

docs/fr-FR/contributing.md

@@ -2,7 +2,7 @@
 
 👍🎉 Premièrement, merci de prendre le temps de lire ceci et de contribuer! 🎉👍
 
-Les contributions de tiers nous aide à améliorer et faire grandir QMK. Nous voulons rendre les pull requests et le processus de contribution utile et simple à la fois pour les contributeurs et les mainteneurs. C'est pourquoi nous avons mis en places des directives pour les contibuteurs afin que votre pull request puisse être accepté sans changement majeur.
+Les contributions de tiers nous aide à améliorer et faire grandir QMK. Nous voulons rendre les pull requests et le processus de contribution utile et simple à la fois pour les contributeurs et les mainteneurs. C'est pourquoi nous avons mis en places des directives pour les contributeurs afin que votre pull request puisse être accepté sans changement majeur.
 
 * [Aperçu du projet](#project-overview)
 * [Conventions de codage](#coding-conventions)
@@ -38,7 +38,7 @@ Vous n'avez encore jamais contribué à un projet open source? Vous vous demande
 0. Enregistrez-vous sur [GitHub](https://github.com).
 1. Définissez une keymap à contribuer, [trouvez une issue](https://github.com/qmk/qmk_firmware/issues) que vous souhaitez corriger, ou [une fonction](https://github.com/qmk/qmk_firmware/issues?q=is%3Aopen+is%3Aissue+label%3Afeature) que vous voulez ajouter.
 2. Créez un fork sur le dépôt associé avec une issue sur votre compte GitHub. Cela veut dire que vous allez avoir une copie du dépôt sous `votre-login-GitHub/qmk_firmware`.
-3. Clonez le dépôt sur votre macine locale en utilisant `git clone https://github.com/login-github/repository-name.git`.
+3. Clonez le dépôt sur votre machine locale en utilisant `git clone https://github.com/login-github/repository-name.git`.
 4. Si vous travaillez sur une nouvelle fonctionnalité, pensez à ouvrir une issue pour parler avec nous du travail que vous souhaitez démarrer.
 5. Créez une nouvelle branche pour votre correctif en utilisant `git checkout -b nom-de-branche`.
 6. Faites les changements nécessaires pour corriger le problème ou ajouter la fonctionnalité.
@@ -69,7 +69,7 @@ Nous avons un certain nombre de type de changements dans QMK, chacun nécessitan
   * Keymaps: Assurez-vous que `make keyboard:your_new_keymap` ne renvoie pas d'erreur.
   * Claviers: Assurez-vous que `make keyboard:all` ne renvoie pas d'erreur.
   * Core: Assurez-vous que `make all` ne renvoie pas d'erreur.
-* Assurez-vous que les messages de commit soient compréhensibles d'eux-même. Vous devriez écrire une description simple (pas plus de 70 caractères) sur la première ligne, suivi d'une ligne vide, suivi d'un détail de votre commit, si nécessaire. Exemple:
+* Assurez-vous que les messages de commit soient compréhensibles d'eux-mêmes. Vous devriez écrire une description simple (pas plus de 70 caractères) sur la première ligne, suivi d'une ligne vide, suivi d'un détail de votre commit, si nécessaire. Exemple:
 
 ```
 Adjust the fronzlebop for the kerpleplork
@@ -81,11 +81,11 @@ Limited experimentation on the devices I have available shows that 7 is high eno
 
 ## Documentation
 
-La documentation est l'une des manière les plus simples de démarrer la contribution sur QMK. Il est simple de trouver des endroits où la documentation est fausse ou incomplète, et il est tout aussi simple de la corriger! Nous avons aussi grandement besoin de quelqu'un pour éditer notre documentation, donc si vous avez des compétences en édition mais que vous n'êtes pas sûr de savoir où aller, n'hésitez pas [demandez de l'aide](#where-can-i-go-for-help)!
+La documentation est l'une des manières les plus simples de démarrer la contribution sur QMK. Il est simple de trouver des endroits où la documentation est fausse ou incomplète, et il est tout aussi simple de la corriger! Nous avons aussi grandement besoin de quelqu'un pour éditer notre documentation, donc si vous avez des compétences en édition mais que vous n'êtes pas sûr de savoir où aller, n'hésitez pas [demandez de l'aide](#where-can-i-go-for-help)!
 
 Vous trouverez toute notre documentation dans le répertoire `qmk_firmware/docs`, ou si vous préférez utiliser des outils web, vous pouvez cliquer sur le bouton "Suggest An Edit" en haut de chaque page sur http://docs.qmk.fm/.
 
-Lorsque vous donnez des exemples de code dans la documentation, essayez de suivre les conventions de nommage utilisées ailleurs dnas la documentation. Par exemple, standardisez les enums en utilisant `my_layers` ou `my_keycodes` afin de garder une consistance:
+Lorsque vous donnez des exemples de code dans la documentation, essayez de suivre les conventions de nommage utilisées ailleurs dans la documentation. Par exemple, standardisez les enums en utilisant `my_layers` ou `my_keycodes` afin de garder une consistance:
 
 ```c
 enum my_layers {
@@ -129,16 +129,16 @@ Faites attention d'être sûr d'implémenter votre nouvelle fonctionnalité de l
 * [Chat sur Discord](https://discord.gg/Uq7gcHh)
 * [Ouvrir une Issue](https://github.com/qmk/qmk_firmware/issues/new)
 
-Les PR de nouvelles fonctionnalités de de correction de bug affectent tous les claviers. Nous sommes aussi dans un processus de restructuration de QMK. Pour cette raison, il est absolument nécessaire que tout changement important ou significatif soit discuté avant que l'implémentation soit faite. Si vous ouvrez un PR sans nous avoir parlé, préparez vous à faire des refontes significatives si vous changements ne sont pas compatibles avec ce que nous avons planifié.
+Les PR de nouvelles fonctionnalités de de correction de bug affectent tous les claviers. Nous sommes aussi dans un processus de restructuration de QMK. Pour cette raison, il est absolument nécessaire que tout changement important ou significatif soit discuté avant que l'implémentation soit faite. Si vous ouvrez un PR sans nous avoir parlé, préparez-vous à faire des refontes significatives si vos changements ne sont pas compatibles avec ce que nous avons planifié.
 
 Voici quelques choses à garder en tête lorsque vous travaillez sur une fonctionnalité ou un bug fix.
 
-* **Désactivé par défaut** - la mémoire est plutôt limitée sur la plupart des puces que QMK supporte, et il est important que les keymaps courantes ne soient pas cassées. S'il vous plaît faites que vos features doivent être **activées** plutôt que désactivées. Si vous pensez qu'elle devrait être activée par défaut, ou que cela réduit la taille du code, parlez-nous en.
+* **Désactivé par défaut** - la mémoire est plutôt limitée sur la plupart des puces que QMK supporte, et il est important que les keymaps courantes ne soient pas cassées. S'il vous plaît faites que vos features doivent être **activées** plutôt que désactivées. Si vous pensez qu'elle devrait être activée par défaut, ou que cela réduit la taille du code, parlez-nous-en.
 * **Compilez localement avant de soumettre** - Cela devrait aller sans dire, mais votre code doit compiler! Notre système Travis devrait relever les problèmes, mais il est généralement plus rapide de compiler quelques claviers en local plutôt que d'attendre le retour des résultats
 * **Faites attention aux révisions et différentes bases de puces** - beaucoup de claviers ont des révisions qui permettent des changements de configuration mineurs, voir des bases de chip différentes. Essayez de faire que votre fonctionnalité soit supportée à la fois sur ARM et AVR, ou désactivez-là automatiquement sur les plateformes non supportées.
 * **Expliquez votre fonctionnalité** - Documentez-là dans `docs/`, soit dans un nouveau fichier, ou dans une partie d'un fichier existant. Si vous ne la documentez pas, personne ne pourra bénéficier de votre dur labeur.
 
-Nous vous demandons aussi de suivre ces ces directives:
+Nous vous demandons aussi de suivre ces directives:
 
 * Gardez un nombre de commits raisonnable, ou nous squasherons votre PR.
 * Ne regroupez pas des claviers ou des keymaps avec des changements core. Soumettez vos changements core en premier.
@@ -151,4 +151,4 @@ Afin de maintenir une vision claire sur comment les choses sont architectuées d
 
 # Que veut dire le code de conduite pour moi?
 
-Note [Code De Conduite](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) veut dire que vous avez la responsabilité de traiter tout le monde dans le projet avec respect et courtoisie, peut importe leur identité. Si vous êtes victime d'une attitude ou de commentaires inapropriés, tels que décrit dans notre Code de Conduite, nous sommes là pour vous et nous ferons de notre mieux pour nous assurer que le fautif soit réprimandé, tel que décrit dans notre code.
+Note [Code De Conduite](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) veut dire que vous avez la responsabilité de traiter tout le monde dans le projet avec respect et courtoisie, peu importe leur identité. Si vous êtes victime d'une attitude ou de commentaires inappropriés, tels que décrit dans notre Code de Conduite, nous sommes là pour vous et nous ferons de notre mieux pour nous assurer que le fautif soit réprimandé, tel que décrit dans notre code.

docs/fr-FR/flashing.md

@@ -1,6 +1,6 @@
 # Instructions pour flasher et informations sur les bootloader
 
-Les claviers utilisent différents types de bootloaders et certains doivent être flashés différement. Heureusement, certains projets comme la [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) ont pour objectifs de permettre de flasher les différents bootloader sans trop se faire de soucis et ça peut importe les manières de les flasher.
+Les claviers utilisent différents types de bootloaders et certains doivent être flashés différement. Heureusement, certains projets comme la [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) ont pour objectifs de permettre de flasher les différents bootloader sans trop se faire de soucis et ça peu importe les manières de les flasher.
 
 Si vous avez un bootloader sélectionné avec la variable `BOOTLOADER` dans votre fichier `rules.mk` alors QMK vas automatiquement calculer si votre fichier .hex n'est pas trop grand pour être flashé sur votre appareil, et il affichera la taille finale du firmware. Pour vérifier la taille manuellement, vous pouvez aussi compiler le firmware avec l'option `check-size`. Exemple : `make planck/rev4:default:check-size`.
 
@@ -49,7 +49,7 @@ QMK a un fork du bootloader LUFA DFU qui vous permet de faire un simple scan de
     #define QMK_LED E6
     #define QMK_SPEAKER C6
 
-Le fabriquant et le nom du produit proviennent de vos définitions dans fichier  `config.h`, et la chaîne de caractère « bootloader » est ajoutée au nom du prodruit.
+Le fabricant et le nom du produit proviennent de vos définitions dans fichier  `config.h`, et la chaîne de caractère « bootloader » est ajoutée au nom du produit.
 
 Pour génerer le bootloader, utilisez la cible `bootloader`. Exemple : `make planck/rev4:default:bootloader`.
 
@@ -66,7 +66,7 @@ Il y a plusieurs commandes DFU que vous pouvez utiliser pour flasher le firmware
 
 ## Caterina
 
-Les cartes arduinos et leurs clones utilisent le [bootloader Caterina](https://github.com/arduino/ArduinoCore-avr/tree/master/bootloaders/caterina) (tous les claviers utilisant un Pro Micro, ou un clone). Ils utilisent aussi le protocole avr109 pour communiquer en virtuellement en série (serial en Anglais). Les bootloaders comme le [A-Star](https://www.pololu.com/docs/0J61/9) sont basés sur Caterina.
+Les cartes arduinos et leurs clones utilisent le [bootloader Caterina](https://github.com/arduino/ArduinoCore-avr/tree/master/bootloaders/caterina) (tous les claviers utilisant un Pro Micro, ou un clone). Ils utilisent aussi le protocole avr109 pour communiquer en virtuellement en série (serial en anglais). Les bootloaders comme le [A-Star](https://www.pololu.com/docs/0J61/9) sont basés sur Caterina.
 
 Pour vérifier la compatibilité avec un bootloader Caterina, vérifiez que ce bloc est présent dans votre fichier `rules.mk` :
 
@@ -84,8 +84,8 @@ BOOTLOADER = caterina
 
 Flashers compatibles :
 
-* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (Interface graphique recomandée)
-* [avrdude](http://www.nongnu.org/avrdude/) avec avr109 / `:avrdude` (Outil en ligne de commande recomandé)
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (Interface graphique recommandée)
+* [avrdude](http://www.nongnu.org/avrdude/) avec avr109 / `:avrdude` (Outil en ligne de commande recommandé)
 * [AVRDUDESS](https://github.com/zkemble/AVRDUDESS)
 
 Séquence de flash : 
@@ -99,11 +99,14 @@ ou, utilisez :
 
     make <keyboard>:<keymap>:avrdude
 
-ou, si vous vous voulez flasher plusieurs claviers, utilisez la commande suivante :
+#### Commandes Caterina 
 
-    make <keyboard>:<keymap>:avrdude-loop
+Il existe un certain nombre de commandes DFU que vous pouvez utiliser pour mettre à jour le firmware sur un périphérique DFU:
 
-Quand vous avez fini de flasher vos claviers, vous aurez besoin d'utiliser Ctrl + C ou alors la touche ayant la fonction similaire sur votre OS pour sortir de la boucle.
+* `: avrdude` - Il s’agit de l’option normale. Le script va attendre qu’un appareil Caterina soit disponible. Dès que c’est le cas, il flash le firmware. Il attendra de détecter un nouveau port COM pour le flasher.
+* `: avrdude-loop` - Cela fonctionne de la même manière que`: avrdude`, mais une fois que chaque périphérique est flashé, il tentera de flasher à nouveau. Cela peut être utile pour flasher plusieurs claviers à la suite. _Cela implique de sortir manuellement de la boucle en appuyant sur Ctrl + C, Cmd + C ou un raccourci équivalent selon votre OS_
+* `: avrdude-split-left` - Cela fonctionne de la même manière que la fonction (`: avrdude`). Toutefois, cela permet aussi de flasher le coté gauche de l'EEPROM des claviers splittés / divisés. C'est donc la méthode recommandée pour les claviers splittés avec Pro Micro.
+* `: avrdude-split-right` - Cela fonctionne de la même manière que la fonction (`: avrdude`). Toutefois, cela permet aussi de flasher le coté droite de l'EEPROM des claviers splittés / divisés. C'est donc la méthode recommandée pour les claviers splittés avec Pro Micro.
 
 ## Halfkay
 
@@ -169,7 +172,7 @@ Séquence de flash :
 
 ## BootloadHID
 
-BootloadHID est un bootloader pour les microcontroleurs AVR. L'utilitaire de téleversement ne demande pas de drivers au niveau du kernel et peut être lancé sans installer aucune DLLs.
+BootloadHID est un bootloader pour les microcontrôleurs AVR. L'utilitaire de téleversement ne demande pas de drivers au niveau du kernel et peut être lancé sans installer aucune DLLs.
 
 Pour vérifier la compatibilité avec le bootloader bootloadHID, vérifiez que ce bloc existe dans votre fichier `rules.mk` : 
 
@@ -194,7 +197,7 @@ Séquence de flash
 
 1. Entrez dans le bootloader en utilisant l'une de ces méthodes :
     * Pressez la touche du keycode `RESET` (Cela ne fonctionnera pas sur certains appareils).
-    * Verouillez la touche « Salt » tout en branchant le clavier (Géneralement ce principe est documenté dans le fichier readme du clavier)
+    * Verrouillez la touche « Salt » tout en branchant le clavier (Généralement ce principe est documenté dans le fichier readme du clavier)
 2. Attendez que l'OS détecte l'appareil.
 3. Flasher le fichier .hex.
 4. Redémarrez l'appareil en mode « application ». Cela peut être fait automatiquement.
@@ -224,13 +227,13 @@ Séquence pour flasher:
 3. Flasher un fichier `.bin`.h
     * Vous allez recevoir un avertissement à propos de la signature DFU. Ignorez-la.
 4. Réinitialisez l'appareil en mode « application ». Cela peut être fait automatiquement.
-    * Si vous êtes en train de travailler en ligne de commande, par exemple avec un `make planck/rev6:default:dfu-util` alors soyez bien sur que l'argument `:leave` est passé aux argument DFU grâce à la variable `DFU_ARGS` à l'intérieur de votre fichier `rules.mk` (Ex : `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) afin que votre appareil redémarre après avoir été flashé.
+    * Si vous êtes en train de travailler en ligne de commande, par exemple avec un `make planck/rev6:default:dfu-util` alors soyez bien sur que l'argument `:leave` est passé aux arguments DFU grâce à la variable `DFU_ARGS` à l'intérieur de votre fichier `rules.mk` (Ex : `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) afin que votre appareil redémarre après avoir été flashé.
 
 ### Commandes STM32
 
 Il y a différentes commandes que vous pouvez utiliser pour flasher un firmware dans un appareil STM32  :
 
-* `:dfu-util` - La commande par défaut pour flasher un appareil STM32.
-* `:dfu-util-split-left` - Permet de flasher un firmware normalement, tout comme l'option précedente mais permet de configurer le coté gauche des paramètres EEPROM sur un clavier scindé.
-* `:dfu-util-split-right` - Permet de flasher un firmware normalement, tout comme l'option précedente mais permet de configurer le coté droit des paramètres EEPROM sur un clavier scindé.
+* `:dfu-util` - C'est l'option standard pour flasher un appareil STM32. Le script attendra qu'un bootloader STM32 soit présent.
+* `:dfu-util-split-left` - Permet de flasher un firmware normalement, tout comme l'option précédente mais permet de configurer le côté gauche des paramètres EEPROM sur un clavier scindé.
+* `:dfu-util-split-right` - Permet de flasher un firmware normalement, tout comme l'option précédente mais permet de configurer le côté droit des paramètres EEPROM sur un clavier scindé.
 * `:st-link-cli` - Cela permet de flasher le firmware avec l'utilitaire en ligne de commande ST-LINK's plutôt que d'utiliser dfu-util.

docs/fr-FR/getting_started_getting_help.md

@@ -4,7 +4,7 @@ Il y a beaucoup de ressources pour trouver de l'aide avec QMK.
 
 ## Chat temps-réel
 
-Vous trouverez des développeurs QMK et des utilisateurs sur notre [Serveur Discord](https://discord.gg/Uq7gcHh) principal. Il y a des canaux spécifiques dans le serveurs pour discuter des firmware, toolbox, hardware et configurateurs.
+Vous trouverez des développeurs QMK et des utilisateurs sur notre [Serveur Discord](https://discord.gg/Uq7gcHh) principal. Il y a des canaux spécifiques dans le serveur pour discuter des firmwares, toolbox, hardware et configurateurs.
 
 ## Sous-Reddit OLKB
 
@@ -12,4 +12,4 @@ Le forum officiel de QMK est [/r/olkb](https://reddit.com/r/olkb) sur [reddit.co
 
 ## Tickets GitHub
 
-Vous pouvez ouvrir un [ticket sur GitHub](https://github.com/qmk/qmk_firmware/issues). Ceci est spécialement pratique lorsque votre problème demande une discussion long terme ou un débugage.
+Vous pouvez ouvrir un [ticket sur GitHub](https://github.com/qmk/qmk_firmware/issues). Ceci est spécialement pratique lorsque votre problème demande une discussion sur le long terme ou un débugage.

docs/fr-FR/getting_started_github.md

@@ -8,11 +8,11 @@ Commencez par la [page GitHub de QMK](https://github.com/qmk/qmk_firmware), et v
 
 ![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
 
-Si vous faites partie d'une organisation, vous aurez besoin de savoir quel compte utiliser pour le fork. Dans la plupart des cas, vous voudrez créer le fork dans votre compte personnel. Une fois le fork complet (cela peut quelque fois prendre un peu de temps), appuyez sur le bouton "Clone or download":
+Si vous faites partie d'une organisation, vous aurez besoin de savoir quel compte utiliser pour le fork. Dans la plupart des cas, vous voudrez créer le fork dans votre compte personnel. Une fois le fork complet (cela peut quelques fois prendre un peu de temps), appuyez sur le bouton "Clone or download":
 
 ![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
 
-Faites attention à sélectionner "HTTPS", et sélectionnez le liens et copiez-le:
+Faites attention à sélectionner "HTTPS", et sélectionnez le lien et copiez-le:
 
 ![HTTPS link](http://i.imgur.com/eGO0ohO.jpg)
 
@@ -48,7 +48,7 @@ To https://github.com/whoeveryouare/qmk_firmware.git
  + 20043e64...7da94ac5 master -> master
 ```
 
-Vos changements existent maintenant dans votre fork sur GitHub. Si vous allez à cete adresse (`https://github.com/<whoeveryouare>/qmk_firmware`), vous pouvez créer un nouveau "Pull Request" en cliquant sur ce bouton:
+Vos changements existent maintenant dans votre fork sur GitHub. Si vous allez à cette adresse (`https://github.com/<whoeveryouare>/qmk_firmware`), vous pouvez créer un nouveau "Pull Request" en cliquant sur ce bouton:
 
 ![New Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
 

docs/fr-FR/getting_started_introduction.md

@@ -43,7 +43,7 @@ Le fichier `config.h` peut être mis à 3 endroits:
 * userspace (`/users/<user>/config.h`)
 * keymap (`/keyboards/<keyboard>/keymaps/<keymap>/config.h`)
 
-Le système de compilation cherche automatiquement les fichiers de configuration dans l'ordre au dessus. Si vous souhaitez surcharger une configuration définie par un `config.h` précédent, vous devrez d'abord ajouter le code suivant.
+Le système de compilation cherche automatiquement les fichiers de configuration dans l'ordre au-dessus. Si vous souhaitez surcharger une configuration définie par un `config.h` précédent, vous devrez d'abord ajouter le code suivant.
 
 ```
 #pragma once
@@ -51,7 +51,7 @@ Le système de compilation cherche automatiquement les fichiers de configuration
 
 Ensuite, pour surcharger l'option du fichier `config.h` précédent, vous devez `#undef` puis `#define` l'option à nouveau.
 
-Voici à quoi l'ensemble du code resemble une fois regroupé:
+Voici à quoi l'ensemble du code ressemble une fois regroupé:
 
 ```
 #pragma once

docs/fr-FR/newbs_best_practices.md

@@ -11,7 +11,7 @@ Ce document suppose les choses suivantes:
 
 ## La branche master de votre fork: Mettre à jour souvent, ne jamais commit
 
-Il est hautement recommandé pour le développement de QMK, peu importe ce qui est fait ou où, de garder votre branche `master` à jour, mais de ne ***jamais*** commit dessus. A la place, faites tous vos changement dans une branche de développement et crééz des "pull requests" de votre branche lorsque vous développez.
+Il est hautement recommandé pour le développement de QMK, peu importe ce qui est fait ou où, de garder votre branche `master` à jour, mais de ne ***jamais*** commit dessus. A la place, faites tous vos changements dans une branche de développement et crééz des "pull requests" de votre branche lorsque vous développez.
 
 Pour réduire les chances de conflits de fusion (merge) — des cas où deux ou plus d'utilisateurs ont édité la même section d'un fichier en parallèle — gardez votre branche `master` relativement à jour et démarrez chaque nouveau développement en créant une nouvelle branche.
 
@@ -44,7 +44,7 @@ git pull upstream master
 git push origin master
 ```
 
-Cela vous change la branche courante en master, synchronise les données de réferences du dépôt QMK vers votre ordinateur. La commande pull tire les données de réferences vers votre branche courante puis les y téleverse. La commande push permet de pousser la branche courante (master) vers votre fork github.
+Cela vous change la branche courante en master, synchronise les données de références du dépôt QMK vers votre ordinateur. La commande pull tire les données de références vers votre branche courante puis les y téleverse. La commande push permet de pousser la branche courante (master) vers votre fork github.
 
 ### Faire des changements
 
@@ -55,11 +55,11 @@ git checkout -b dev_branch
 git push --set-upstream origin dev_branch
 ```
 
-Ceci crée une branche nommée `dev_branch`, bascule vers cette branche, et ensuite sauvegarde cette nouvelle branche vers votre fork. L'argument `--set-upstream` demande à git d'utiliser votre fork et la branche `dev_branch` à chaque fois que vous utilisez `git push` ou `git pull` depuis cette branche. Vous ne devez l'utiliser que pour le premier "push", après celà, vous pouvez utiliser simplement `git push` ou `git pull`, sans le reste des arguments.
+Ceci crée une branche nommée `dev_branch`, bascule vers cette branche, et ensuite sauvegarde cette nouvelle branche vers votre fork. L'argument `--set-upstream` demande à git d'utiliser votre fork et la branche `dev_branch` à chaque fois que vous utilisez `git push` ou `git pull` depuis cette branche. Vous ne devez l'utiliser que pour le premier "push", après cela, vous pouvez utiliser simplement `git push` ou `git pull`, sans le reste des arguments.
 
 !> Avec `git push`, vous pouvez utiliser `-u` à la place de `--set-upstream` — `-u` est un alias pour `--set-upstream`.
 
-Vous pouvez appeler votre branche à peu prêt comme vous voulez, toutefois il est recommandé d'utiliser un nom qui est lié aux changements que vous allez faire.
+Vous pouvez appeler votre branche à peu près comme vous voulez, toutefois il est recommandé d'utiliser un nom qui est lié aux changements que vous allez faire.
 
 Par défaut, `git checkout -b` va faire de la branche actuelle la branche de base de votre nouvelle branche. Vous pouvez définir la base de votre nouvelle branche comme étant n'importe quelle branche existante qui n'est pas la courante en utilisant la commande:
 
@@ -76,11 +76,11 @@ git commit -m "My commit message."
 
 `git add` ajoute les fichiers qui ont été changés dans la *zone de staging* de Git, qui est sa "zone de chargement". Elle contient tous les changements qui vont être *validés* (committed) par `git commit`, qui sauvegarde les changements vers le dépôt. Utilisez des messages de validation descriptifs afin que vous puissiez savoir ce qui a changé d'un coup d'oeil.
 
-!> Si vous changez beaucoup de fichiers, mais tous les fichiers font partie du même changement, vous pouvez utiliser `git add .` pour ajouter tous les fichiers changés dans le répertoire courant, plutôt que d'avoir à ajouter chaque fichiers individuellement.
+!> Si vous changez beaucoup de fichiers, mais tous les fichiers font partie du même changement, vous pouvez utiliser `git add .` pour ajouter tous les fichiers changés dans le répertoire courant, plutôt que d'avoir à ajouter chaque fichier individuellement.
 
 ### Publier Vos Changements
 
-La dernière étape est de pousser vos changements vers votre fork. pour se faire, entrez `git push`. Git publie maintenant l'état courant de `dev_branch` vers votre fork.
+La dernière étape est de pousser vos changements vers votre fork. Pour ce faire, entrez `git push`. Git publie maintenant l'état courant de `dev_branch` vers votre fork.
 
 ## Résoudre Les Conflits De Merge
 
@@ -112,7 +112,7 @@ Maintenant que l'état actuel de la branche courante et la branche upstream sont
 git rebase upstream/master
 ```
 
-Ceci dit à Git d'annuler les commits de la branche courrante puis de les réappliquer sur la branche master de QMK.
+Ceci dit à Git d'annuler les commits de la branche courante puis de les réappliquer sur la branche master de QMK.
 
 ```bash
 $ git rebase upstream/master
@@ -133,7 +133,7 @@ You can instead skip this commit: run "git rebase --skip".
 To abort and get back to the state before "git rebase", run "git rebase --abort".
 ```
 
-Ceci nous dit que nous avons un conflit de merge, et nous donne le nom du fichier en conflit. Ouvez le fichier conflictuel dans votre éditeur de texte et, quelque part dans le fichier, vous trouverez quelque chose comme ça:
+Ceci nous dit que nous avons un conflit de merge, et nous donne le nom du fichier en conflit. Ouvrez le fichier conflictuel dans votre éditeur de texte et, quelque part dans le fichier, vous trouverez quelque chose comme ça:
 
 ```bash
 <<<<<<< HEAD

docs/fr-FR/newbs_building_firmware_configurator.md

@@ -20,11 +20,11 @@ Je vais le répéter, parce que c'est important
 
 !> **FAITES ATTENTION A UTILISER LA BONNE VERSION !**
 
-Si votre clavier est annoncé comme fonctionnant grâce à QMK mais n'est pas dans la liste, il y a des chances que le développeur ne l'ait pas encore fait, ou que nous n'avons pas encore eu le temps de le merger. Ajoutez un problème (issue) sur [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) demandant le support de votre clavier, s'il n'y a pas de [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) ouvert pour lui. Il y a aussi des clavier alimentés par QMK qui sont sur le compte GitHub du fabriquant, il est bon de le vérifier aussi.
+Si votre clavier est annoncé comme fonctionnant grâce à QMK mais n'est pas dans la liste, il y a des chances que le développeur ne l'ait pas encore fait, ou que nous n'avons pas encore eu le temps de le merger. Ajoutez un problème (issue) sur [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) demandant le support de votre clavier, s'il n'y a pas de [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) ouvert pour lui. Il y a aussi des claviers alimentés par QMK qui sont sur le compte GitHub du fabricant, il est bon de le vérifier aussi.
 
 ## Sélectionner la disposition de votre clavier
 
-Choisissez la disposition (layout) qui représente le mieux la keymap que vous voulez créer. Certains clavier n'ont pas encore assez de dispositions ou des dispositions incorrectes. Ils seront supportés dans le future.
+Choisissez la disposition (layout) qui représente le mieux la keymap que vous voulez créer. Certains claviers n'ont pas encore assez de dispositions ou des dispositions incorrectes. Ils seront supportés dans le future.
 
 ## Nom de la Keymap
 

docs/fr-FR/newbs_flashing.md

@@ -78,7 +78,23 @@ Appuyez sur le boutton `Flash` dans QMK Toolbox. Vous verrez un résultat simila
 
 ## Flashez votre clavier à l'aide de la ligne de commande
 
-La première chose que vous devez savoir c'est quel bootloader utilise votre clavier. Il y a quatre bootloaders principaux. Pro-Micro et les clones, utilisent CATERINA, les Teensy utilisent Halfkay, les OLKB utilisent QMK-DFU et les autres chips atmega32u4 utilisent DFU.
+C'est désormais relativement simple. Lorsque vous êtes prêt à compiler et à flasher votre firmware, ouvrez la fenêtre de votre terminal et exécutez la commande de build :
+
+    make <my_keyboard>:<my_keymap>:flash
+
+Par exemple, si votre keymap s'appelle "xyverz" et que vous fabriquez une keymap pour un clavier `planck` de version `rev5` vous devrez utiliser cette commande:
+
+    make planck/rev5:xyverz:flash
+
+La commande va vérifier la configuration du clavier, puis tentera de le flasher en fonction du bootloader (chargeur d’amorçage) spécifié. Cela signifie que vous n'avez pas besoin de savoir quel bootloader votre clavier utilise. Exécutez simplement la commande et laissez-le faire le gros du travail.
+
+Cependant, tout dépend du bootloader qui est installé sur le clavier. Si cette information n’est pas configurée ou si vous tentez de flasher un clavier qui ne permet pas d’être flashé alors vous obtiendrez cette erreur :
+
+    WARNING: This board's bootloader is not specified or is not supported by the ":flash" target at this time.
+
+Dans ce cas, vous devrez choisir le bootloader.
+
+Il y a cinq bootloaders principaux. Les Pro-Micro et les clones utilisent Caterina, les Teensy utilisent Halfkay, les claviers AVR d’OLKB utilisent QMK-DFU, certains controleurs atmega32u4 utilisent DFU et la plupart des controlleurs ARM utilisent ARM DFU.
 
 Vous pouvez trouver plus d'information à propos des bootloaders sur la page [Instructions de flash et information sur le Bootloader](flashing.md).
 
@@ -104,7 +120,7 @@ Checking file size of planck_rev5_xyverz.hex
  * File size is fine - 18574/28672
  ```
 
-Une fois arrivé à ce stade, le script de compilation va checher le bootloader DFU toutes les 5 secondes. Il va répéter les messages suivants jusqu'à ce que l'appareil soit trouvé ou que vous l'annuliez.
+Une fois arrivé à ce stade, le script de compilation va chercher le bootloader DFU toutes les 5 secondes. Il va répéter les messages suivants jusqu'à ce que l'appareil soit trouvé ou que vous l'annuliez.
 
     dfu-programmer: no device present.
     Error: Bootloader not found. Trying again in 5s.
@@ -127,7 +143,7 @@ Une fois terminé, vous devrez mettre à zéro le contrôleur. Vous allez voir u
 >>> dfu-programmer atmega32u4 reset
 ```
 
-?> Si vous avez des soucis concerant ceci - comme par exemple `dfu-programmer: no device present` - merci de regarder [Foires Aux Questions de Compilation](faq_build.md).
+?> Si vous avez des soucis concernant ceci - par exemple `dfu-programmer: no device present` - merci de regarder [Foires Aux Questions de Compilation](faq_build.md).
 
 #### Commandes DFU
 
@@ -158,7 +174,7 @@ Checking file size of lets_split_rev2_xyverz.hex
 Detecting USB port, reset your controller now..............
 ```
 
-Une fois ceci fait, réinitialisez votre board et le script va détecter et flasher le firmware. La sortie devrait ressember à quelque chose comme ça:
+Une fois ceci fait, réinitialisez votre board et le script va détecter et flasher le firmware. La sortie devrait ressembler à quelque chose comme ça:
 
 ```
 Detected controller on USB port at /dev/ttyS15
@@ -203,15 +219,18 @@ avrdude.exe: safemode: Fuses OK (E:CB, H:D8, L:FF)
 avrdude.exe done.  Thank you.
 ```
 
-Si vous avez un soucis, essayez de faire ceci:
+Si vous avez un souci, essayez de faire ceci:
 
     sudo make <my_keyboard>:<my_keymap>:avrdude
 
-En addition, si vous voulez flasher plusieurs boards, utilisez la commande suivante:
+#### Commandes Caterina 
 
-    make <keyboard>:<keymap>:avrdude-loop
+Il existe un certain nombre de commandes DFU que vous pouvez utiliser pour mettre à jour le firmware sur un périphérique DFU:
 
-Une fois que vous avez terminé de flasher des boards, vous devrez appuyer sur Ctrl + C, ou les touches correspondantes pour votre système d'exploitation pour arrêter la boucle.
+* `: avrdude` - Il s’agit de l’option normale. Elle attend qu’un appareil Caterina soit disponible, puis tente de flasher le firmware. Il attendra de détecter un autre port COM, puis il flashera à nouveau.
+* `: avrdude-loop` - Cela fonctionne de la même manière que `: avrdude`, mais une fois que chaque périphérique est flashé, il tentera de flasher à nouveau. Cela peut être utile pour flasher plusieurs claviers à la suite. _Cela implique de sortir manuellement de la boucle en appuyant sur Ctrl + C, Cmd + C ou un raccourci équivalent selon votre OS_
+* `: avrdude-split-left` - Cela fonctionne de la même manière que la fonction (`: avrdude`). Toutefois, cela permet aussi de flasher le coté gauche de l'EEPROM des claviers splittés / divisés. C'est donc la méthode recommandée pour les claviers splittés avec Pro Micro.
+* `: avrdude-split-right` - Cela fonctionne de la même manière que la fonction (`: avrdude`). Toutefois, cela permet aussi de flasher le coté droite de l'EEPROM des claviers splittés / divisés. C'est donc la méthode recommandée pour les claviers splittés avec Pro Micro.
 
 ### HalfKay
 
@@ -246,45 +265,9 @@ Programming.....................................................................
 Booting
 ```
 
-### BootloadHID
-
-Pour les boards basée sur Bootmapper Client(BMC)/bootloadHID/ATmega32A, une fois prêt à compiler et flasher le firmware, ouvrez votre fenêtre de terminal et lancez la commande suivante:
-
-    make <my_keyboard>:<my_keymap>:bootloaderHID
-
-Par exemple, si votre keymap s'appelle "xyverz" et que vous compilez une keymap pour un jj40, vous utilisez cette commande:
-
-    make jj40:xyverz:bootloaderHID
-
-Une fois le firmware compilé, vous aurez cette sortie:
-
-```
-Linking: .build/jj40_default.elf                                                                   [OK]
-Creating load file for flashing: .build/jj40_default.hex                                           [OK]
-Copying jj40_default.hex to qmk_firmware folder                                                    [OK]
-Checking file size of jj40_default.hex                                                             [OK]
- * The firmware size is fine - 21920/28672 (6752 bytes free)
-```
-
-A ce stade, le script de build va chercher le bootloader DFU toutes les 5 secondes. Il va répéter la sortie suivante jusqu'à ce que le dispositif soit trouvé ou que vous l'annuliez.
-
-```
-Error opening HIDBoot device: The specified device was not found
-Trying again in 5s.
-```
-
-Une fois ce résultat atteint, réinitialisez le contrôleur. Il devrait afficher le résultat suivant:
-
-```
-Page size   = 128 (0x80)
-Device size = 32768 (0x8000); 30720 bytes remaining
-Uploading 22016 (0x5600) bytes starting at 0 (0x0)
-0x05580 ... 0x05600
-```
-
 ### STM32 (ARM)
 
-Pour la majorité des boards ARM (incluant les Proton C, Planck Rev 6, et Preonic Rev 3), lorsque vous êtes prêt à compiler et flasher votre firmware,ouvrez la fenêtre de terminal et lancez la commande de compilation:
+Pour la majorité des boards ARM (incluant les Proton C, Planck Rev 6, et Preonic Rev 3), lorsque vous êtes prêt à compiler et flasher votre firmware, ouvrez la fenêtre de terminal et lancez la commande de compilation:
 
     make <my_keyboard>:<my_keymap>:dfu-util
 
@@ -336,10 +319,46 @@ Transitioning to dfuMANIFEST state
 
 Il y  aun certain nombre de commandes du DFU que vous pouvez utiliser pour flasher un firmware sur un device STM32:
 
-* `:dfu-util` - C'est l'option standard pour flasher un appareil STM32.
-* `:dfu-util-wait` - Ceci fonctionne comme la commande standard, mais permet de d'avoir une pause (configurable( de 10 secondes avant de flasher le fimrware. Vous pouvez utiliser `TIME_DELAY=20` à la ligne de commande pour changer le délai.
+* `:dfu-util` - C'est l'option standard pour flasher un appareil STM32. Elle attendra qu'un bootloader STM32 soit présent et tentera de l’utiliser.
 * `:dfu-util-left` - Ceci flasher le firmware standard, comme la commande standard (`:dfu-util`). Toutefois, elle flasher aussi les fichiers EEPROM du "côté gauche" pour les claviers scindés.
 * `:dfu-util-right` - Ceci flash le firmware standard, comme la commande standard (`:dfu-util`). Toutefois, elle flash aussi les fichiers EEPROM du "côté droit" pour les claviers scindés.
+* `:st-link-cli` - Cela permet de flasher le firmware avec l'utilitaire en ligne de commande ST-LINK's plutôt que d'utiliser dfu-util.
+
+### BootloadHID
+
+Pour les claviers basés sur Bootmapper Client(BMC)/bootloadHID/ATmega32A, si vous êtes prêts à compiler et flasher le firmware, ouvrez votre fenêtre de terminal et lancez la commande suivante :
+
+    make <my_keyboard>:<my_keymap>:bootloaderHID
+
+Par exemple, si votre keymap s'appelle "xyverz" et que vous compilez une keymap pour un jj40, utilisez cette commande:
+
+    make jj40:xyverz:bootloaderHID
+
+Une fois le firmware compilé, vous aurez cette sortie:
+
+```
+Linking: .build/jj40_default.elf                                                                   [OK]
+Creating load file for flashing: .build/jj40_default.hex                                           [OK]
+Copying jj40_default.hex to qmk_firmware folder                                                    [OK]
+Checking file size of jj40_default.hex                                                             [OK]
+ * The firmware size is fine - 21920/28672 (6752 bytes free)
+```
+
+A ce stade, le script de build va chercher le bootloader DFU toutes les 5 secondes. Il répétera l ’affichage de ce message jusqu'à ce que l’appareil soit trouvé ou que vous annuliez l'opération```
+
+```
+Error opening HIDBoot device: The specified device was not found
+Trying again in 5s.
+```
+
+Une fois ce résultat obtenu, réinitialisez le contrôleur. Le résultat suivant devrait s’afficher :
+
+```
+Page size   = 128 (0x80)
+Device size = 32768 (0x8000); 30720 bytes remaining
+Uploading 22016 (0x5600) bytes starting at 0 (0x0)
+0x05580 ... 0x05600
+```
 
 ## Faites l'essai!
 

docs/fr-FR/newbs_getting_started.md

@@ -2,19 +2,19 @@
 
 Votre clavier d'ordinateur contient un processeur, proche de celui dans votre ordinateur. Ce processeur exécute un logiciel responsable de détecter les touches appuyées et envoie des rapports à propos de l'état du clavier lorsque les touches sont appuyées et relâchées. QMK prend le rôle de ce logiciel, détectant les appuis des boutons et passant cette information à l'ordinateur hôte. Lorsque vous construisez votre keymap customisée, vous créez l'équivalent d'un programme exécutable pour votre clavier.
 
-QMK essaie de rendre les choses simples faciles, et les choses difficiles possibles. Vous n'avez pas à savoir programmer pour créer des keymaps puissantes - vous devez seulement suivre quelques rêgles de syntaxe simples.
+QMK essaie de rendre les choses simples faciles, et les choses difficiles possibles. Vous n'avez pas à savoir programmer pour créer des keymaps puissantes - vous devez seulement suivre quelques règles de syntaxe simples.
 
 # Guide de démarrage
 
 Avant de pouvoir construire des keymaps, vous devez installer quelques logiciels et configurer votre environnement de compilation. Ceci n'a besoin d'être fait seulement une fois, peu importe le nombre de clavier pour lesquels vous compter compiler un firmware.
 
-Si vous préférez une approche plus proche d'une interface graphique, considérez utiliser l'outil en ligne [QMK Configurator](https://config.qmk.fm). Référez vous à [Construire votre premier firmware en utilisant l'interface graphique en ligne](newbs_building_firmware_configurator.md).
+Si vous préférez une approche plus proche d'une interface graphique, considérez utiliser l'outil en ligne [QMK Configurator](https://config.qmk.fm). Référez-vous à [Construire votre premier firmware en utilisant l'interface graphique en ligne](newbs_building_firmware_configurator.md).
 
 ## Logiciels à télécharger
 
 ### Editeur de texte
 
-Vous allez avoir besoin d'un programme qui peut éditer et sauvegarder des fichier **plain text**. Si vous êtes sur Windows, vous pouvez utiliser notepad et sur Linux vous pouvez utiliser gedit. Ces deux options sont des éditeurs de texte simples mais fonctionnels. Sur macOS, faites attention avec l'application par défaut TextEdit: elle ne sauvegardera pas les fichiers en mode "plain text" sauf si vous sélectionnez explicitement _Make Plain Text_ à partir du menu _Format_.
+Vous allez avoir besoin d'un programme qui peut éditer et sauvegarder des fichiers **plain text**. Si vous êtes sur Windows, vous pouvez utiliser notepad et sur Linux vous pouvez utiliser gedit. Ces deux options sont des éditeurs de texte simples mais fonctionnels. Sur macOS, faites attention avec l'application par défaut TextEdit: elle ne sauvegardera pas les fichiers en mode "plain text" sauf si vous sélectionnez explicitement _Make Plain Text_ à partir du menu _Format_.
 
 Vous pouvez aussi télécharger et installer un éditeur de texte dédié comme [Sublime Text](https://www.sublimetext.com/) ou [VS Code](https://code.visualstudio.com/). C'est probablement la meilleure solution peu importe la plateforme car ce sont des programmes conçus spécifiquement pour éditer du code.
 
@@ -33,7 +33,7 @@ QMK Toolbox est un programme graphique optionnel pour Windows et macOS qui perme
 
 Nous avons essayé de rendre QMK aussi simple que possible à configurer. Vous avez uniquement à préparer votre environnment Linux ou Unix et laisser QMK installer le reste.
 
-?> Si vous n'avez jamais travailé avec la lignde commande Linux/Unix, il y a un certain nombre de concepts basiques et de commandes que vous devriez apprendre. Ces ressources vous apprendrons suffisemment pour travailler avec QMK:<br>
+?> Si vous n'avez jamais travaillé avec la ligne de commande Linux/Unix, il y a un certain nombre de concepts basiques et de commandes que vous devriez apprendre. Ces ressources vous apprendrons suffisemment pour travailler avec QMK:<br>
 [Commandes Linux à savoir](https://www.guru99.com/must-know-linux-commands.html)<br>
 [Commandes Unix de base](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
 
@@ -49,7 +49,7 @@ Vous devez installer MSYS2 et Git.
 
 Vous devez installer Homebew. Suivez les instructions sur la [page de Homebrew](https://brew.sh).
 
-Une fois Homebrew installé, continuez avec _Configurer QMK_. Dans cete étape, nous lancerons un script qui va installer d'autres paquets.
+Une fois Homebrew installé, continuez avec _Configurer QMK_. Dans cette étape, nous lancerons un script qui va installer d'autres paquets.
 
 ### Linux
 

docs/fr-FR/newbs_testing_debugging.md

@@ -4,7 +4,7 @@ Une fois votre clavier configuré avec un firmware custom, vous êtes prêt à l
 
 ## Tester
 
-Tester votre clavier est normalement assez simple. Appuyez chaque touche de votre clavier et assurez vous qu'il envoie les touches auquel vous vous attendiez. Il existe même des programmes qui vous aideront à vérifier qu'aucune touche ne soit oubliée.
+Tester votre clavier est normalement assez simple. Appuyez chaque touche de votre clavier et assurez-vous qu'il envoie les touches auquel vous vous attendiez. Il existe même des programmes qui vous aideront à vérifier qu'aucune touche ne soit oubliée.
 
 Note: ces programmes ne sont ni fournis ni approuvés par QMK.
 
@@ -30,7 +30,7 @@ void keyboard_post_init_user(void) {
 
 ### Débuguer avec QMK Toolbox
 
-Pour les plateformes compatibles, [QMK Toolbox](https://github.com/qmk/qmk_toolbox) peut être utilisé pour afficher les message de débugage pour votre clavier.
+Pour les plateformes compatibles, [QMK Toolbox](https://github.com/qmk/qmk_toolbox) peut être utilisé pour afficher les messages de débugage pour votre clavier.
 
 ### Débuguer avec hid_listen
 
@@ -47,9 +47,9 @@ Parfois, il est utile d'afficher des messages de débugage depuis votre [code cu
 Une fois fait, vous pouvez utiliser les fonctions print suivantes:
 
 * `print("string")`: Affiche une simple chaîne de caractères.
-* `uprintf("%s string", var)`: Affiche une chaîne de caractères formattée.
+* `uprintf("%s string", var)`: Affiche une chaîne de caractères formatée.
 * `dprint("string")` Affiche une chaîne de caractère simple, mais uniquement lorsque le mode debug est activé.
-* `dprintf("%s string", var)`: Affiche une chaîne de caractère formattée, mais uniquement lorsque le mode debug est activé.
+* `dprintf("%s string", var)`: Affiche une chaîne de caractère formatée, mais uniquement lorsque le mode debug est activé.
 
 ## Exemples de debugage
 

docs/getting_started_build_tools.md

@@ -145,7 +145,7 @@ util/docker_build.sh
 There is also support for building _and_ flashing the keyboard straight from Docker by specifying the `target` as well:
 ```bash
 util/docker_build.sh keyboard:keymap:target
-# For example: util/docker_build.sh planck/rev6:default:dfu-util
+# For example: util/docker_build.sh planck/rev6:default:flash
 ```
 If you're on Linux, this should work out of the box. On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use [QMK Toolbox](https://github.com/qmk/qmk_toolbox) instead.
 

docs/getting_started_make_guide.md

@@ -14,8 +14,8 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
 * `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
-* `dfu`, `teensy`, `avrdude`, `dfu-util` or `bootloadHID`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
- * **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck/rev4:default:dfu`.
+* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadHID` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
+ * **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck/rev4:default:flash`.
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.
 
 You can also add extra options at the end of the make command line, after the target
@@ -31,7 +31,7 @@ Here are some examples commands
 
 * `make all:all` builds everything (all keyboard folders, all keymaps). Running just `make` from the `root` will also run this.
 * `make ergodox_infinity:algernon:clean` will clean the build output of the Ergodox Infinity keyboard.
-* `make planck/rev4:default:dfu COLOR=false` builds and uploads the keymap without color output.
+* `make planck/rev4:default:flash COLOR=false` builds and uploads the keymap without color output.
 
 ## `rules.mk` Options
 

docs/hand_wire.md

@@ -1,19 +1,18 @@
-# Quantum Hand-Wiring Guide
+# Hand-Wiring Guide
 
-Parts list:
-* *x* keyswitches (MX, Matias, Gateron, etc)
-* *x* diodes
-* Keyboard plate (metal, plastic, cardboard, etc)
-* Wire (strained for wiring to the Teensy, anything for the rows/columns)
-* Soldering iron set at 600ºF or 315ºC (if temperature-controlled)
-* Rosin-cored solder (leaded or lead-free)
-* Adequate ventilation/a fan
-* Tweezers (optional)
-* Wire cutters/snippers
+## Preamble: How a Keyboard Matrix Works (and why we need diodes)
 
-## How the Matrix Works (Why We Need Diodes)
+The collapsible section below covers why keyboards are wired the way they are, as outlined in this guide.  It isn't required reading to make your own hand wired keyboard, but provides background information.
 
-The microcontroller (in this case, the Teensy 2.0) will be setup up via the firmware to send a logical 1 to the columns, one at a time, and read from the rows, all at once - this process is called matrix scanning. The matrix is a bunch of open switches that, by default, don't allow any current to pass through - the firmware will read this as no keys being pressed. As soon as you press one key down, the logical 1 that was coming from the column the keyswitch is attached to gets passed through the switch and to the corresponding row - check out the following 2x2 example:
+<details>
+
+<summary>Click for details</summary>
+
+Without a matrix circuit each switch would require its own wire directly to the controller.
+
+Simply put, when the circuit is arranged in rows and columns, if a key is pressed, a column wire makes contact with a row wire and completes a circuit. The keyboard controller detects this closed circuit and registers it as a key press.
+
+The microcontroller will be setup up via the firmware to send a logical 1 to the columns, one at a time, and read from the rows, all at once - this process is called matrix scanning. The matrix is a bunch of open switches that, by default, don't allow any current to pass through - the firmware will read this as no keys being pressed. As soon as you press one key down, the logical 1 that was coming from the column the keyswitch is attached to gets passed through the switch and to the corresponding row - check out the following 2x2 example:
 
         Column 0 being scanned     Column 1 being scanned
                   x                                   x
@@ -100,30 +99,132 @@ Things act as they should! Which will get us the following data:
 
 The firmware can then use this correct data to detect what it should do, and eventually, what signals it needs to send to the OS.
 
-# The Actual Hand-Wiring
+Further reading:
+- [Wikipedia article](https://en.wikipedia.org/wiki/Keyboard_matrix_circuit)
+- [Deskthority article](https://deskthority.net/wiki/Keyboard_matrix)
+- [Keyboard Matrix Help by Dave Dribin (2000)](https://www.dribin.org/dave/keyboard/one_html/)
+- [How Key Matrices Works by PCBheaven](http://pcbheaven.com/wikipages/How_Key_Matrices_Works/) (animated examples)
+- [How keyboards work - QMK documentation](how_keyboards_work.md)
 
-## Getting Things in Place
+</details>
 
-When starting this, you should have all of your stabilisers and keyswitches already installed (and optionally keycaps). If you're using a Cherry-type stabiliser (plate-mounted only, obviously), you'll need to install that before your keyswitches. If you're using Costar ones, you can installed them afterwards.
 
-To make things easier on yourself, make sure all of the keyswitches are oriented the same way (if they can be - not all layouts support this). Despite this, it's important to remember that the contacts on the keyswitches are completely symmetrical. We'll be using the keyswitch's left side contact for wiring the rows, and the right side one for wiring the columns.
+## Parts list
 
-Get your soldering iron heated-up and collect the rest of the materials from the part list at the beginning of the guide. Place your keyboard so that the bottoms of the keyswitches are accessible - it may be a good idea to place it on a cloth to protect your keyswitches/keycaps.
+You will need: (where *x* is the number of keys on your planned keyboard)
 
-Before continuing, plan out where you're going to place your Teensy. If you're working with a board that has a large (6.25u) spacebar, it may be a good idea to place it in-between switches against the plate. Otherwise, you may want to trim some of the leads on the keyswitches where you plan on putting it - this will make it a little harder to solder the wire/diodes, but give you more room to place the Teensy.
+* QMK compatible microcontroller board (Teensy, Pro-Micro, QMK Proton C etc.)
+* *x* keyswitches (MX, Matias, Gateron, etc)
+* *x* through hole diodes
+* Keyboard plate and plate mount stabilisers
+* Wire
+* Soldering iron
+* Rosin-cored solder
+* Adequate ventilation/a fan
+* Wire cutters/snippers
 
-## Preparing the Diodes
+Optional but useful:
 
-It's a little easier to solder the diodes in place if you bend them at a 90º angle immediately after the black line - this will help to make sure you put them on the right way (direction matters), and in the correct position. The diodes will look like this when bent (with longer leads):
+* Wire strippers/a sharp knife
+* Tweezers and/or small needle nose pliers
+* Soldering station/Helping hands
 
-```
-       ┌─────┬─┐
-    ───┤     │ ├─┐
-       └─────┴─┘ │
-                 │
-```
+## Starting the build
 
-We'll be using the long lead at the bent end to connect it to the elbow (bent part) of the next diode, creating the row.
+There are many ways to hand wire a PCB matrix, this guide will describe the fundamentals as well as some recommended ways to go about it.
+
+As we are dealing with hand wiring, it is assumed that you already have a plate.  If you are planning a completely custom layout, tools such as [ai03 Plate Generator](https://kbplate.ai03.me/) and [Swillkb Plate & Case Builder](http://builder.swillkb.com/) can help when designing one.
+
+Start by installing the switches and stabilisers in the plate. Depending on the thickness and material this may also involve hot gluing it in place.
+
+## Planning the matrix
+
+If you are following a pre-existing handwire guide (e.g. for the keyboards in the [handwire firmware section](https://github.com/qmk/qmk_firmware/tree/master/keyboards/handwired) you can skip this step, just ensure you wire the matrix as described.
+
+What you want to achieve is one leg from each switch being attached to the corresponding switches next to it (rows) and the other leg being attached to the switches above and below it (columns) and a diode to one of the legs, mosy commonly this will be the leg attached to the rows, and the diode will face away from it (Column to Row) i.e. with the wire furthest from the black line on the diode connected to the switch (as current will only travel in one direction through a diode)
+
+It is fairly simple to plan for an ortholinear keyboard (like a Planck).
+
+![Example planck matrix](https://i.imgur.com/FRShcLD.png)
+Image from [RoastPotatoes' "How to hand wire a Planck"](https://blog.roastpotatoes.co/guide/2015/11/04/how-to-handwire-a-planck/)
+
+But the larger and more complicated your keyboard, the more complex the matrix.  [Keyboard Firmware Builder](https://kbfirmware.com/) can help you plan your matrix layout (shown here with a basic fullsize ISO keyboard imported from [Keyboard Layout Editor](http://www.keyboard-layout-editor.com).
+
+![Example ISO matrix](https://i.imgur.com/UlJ4ZDP.png)
+
+ Bear in mind that the number of rows plus the number of columns can not exceed the number of I/O pins on your controller.  So the fullsize matrix shown above would be possible on a Proton C or Teensy++, but not on a regular Teensy or Pro Micro
+
+#### Common Microcontroller Boards
+
+| Board         | Controller    | # I/O  | Pinout |
+| :------------ |:-------------:| ------:| ------ |
+| Pro Micro*     | ATmega32u4    |     20 | [link](https://learn.sparkfun.com/tutorials/pro-micro--fio-v3-hookup-guide/hardware-overview-pro-micro#Teensy++_2.0)       |
+| Teensy 2.0    | ATmega32u4    |     25 | [link](https://www.pjrc.com/teensy/pinout.html)       |
+| [QMK Proton C](https://qmk.fm/proton-c/)      | STM32F303xC   |     36 | [link 1](https://i.imgur.com/RhtrAlc.png), [2](https://deskthority.net/wiki/QMK_Proton_C)       |
+| Teensy++ 2.0  | AT90USB1286   |     46 | [link](https://www.pjrc.com/teensy/pinout.html#Teensy_2.0)       |
+
+*Elite C is essentially the same as a pro micro with a USB-C instead of Micro-USB
+
+There are also a number of boards designed specifically for handwiring that mount directly to a small number of switches and offer pinouts for the rest.  Though these are generally more expensive and may be more difficult to get hold of.
+
+<img src="https://i.imgur.com/QiA3ta6.jpg" alt="Postage board mini mounted in place" width="500"/>
+
+| Board         | Controller    | # I/O  |
+| :------------ |:-------------:| ------:|
+| [Swiss helper](https://www.reddit.com/r/MechanicalKeyboards/comments/8jg5d6/hand_wiring_this_might_help/) |  ATmega32u4 | 20 |
+| [Postage board](https://github.com/LifeIsOnTheWire/Postage-Board/)| ATmega32u4| 25 |
+| [Postage board mini](https://geekhack.org/index.php?topic=101460.0)| ATmega32u4| 25 |
+
+## Wiring the matrix
+
+There is no one right way to do this.  What you want to achieve is good connection at all of the joints planned and no unintentional shorts.
+
+Established materials and techniques include:
+
+| Technique     | Examples | Pros | Cons | Image
+| :-----------| :------- | :------ | :--- | :---
+| Lengths of wire with stripped segments | [Sasha Solomon's Dactyl](https://medium.com/@sachee/building-my-first-keyboard-and-you-can-too-512c0f8a4c5f) and [Cribbit's modern hand wire](https://geekhack.org/index.php?topic=87689.0) | Neat and tidy | Some effort in stripping the wire | ![Stripped wire](https://i.imgur.com/0GNIYY0.jpg)
+| Short lengths of wire | [u/xicolinguada's ortho build](https://www.reddit.com/r/MechanicalKeyboards/comments/c39k4f/my_first_hand_wired_keyboard_its_not_perfect_but/) | Easier to strip the wire | More difficult to place | ![individual wire lengths](https://i.imgur.com/mBe5vkL.jpg)
+| Magnet/Enamelled wire | [Brett Kosinski's handwired alpha](http://blog.b-ark.ca/Blog-2019-01-27) and [fknraiden's custom board](https://geekhack.org/index.php?topic=74223.0) | Can be directly soldered onto (insulation burns off with heat) | Appearance? | ![Magnet wire](https://i.imgur.com/b4b7KDb.jpg)
+| Bending the legs of the diodes for the rows | [Matt3o's Brownfox](https://deskthority.net/viewtopic.php?f=7&t=6050) | Fewer solder joints required | Uninsulated | ![Bent diode legs](https://i.imgur.com/aTnG8TV.jpg)
+| Using ridid wiring (e.g. brass tube) | [u/d_stilgar's invisible hardline](https://www.reddit.com/r/MechanicalKeyboards/comments/8aw5j2/invisible_hardline_keyboard_progress_update_april/) and [u/jonasfasler's first attempt](https://www.reddit.com/r/MechanicalKeyboards/comments/de1jyv/my_first_attempt_at_handwiring_a_keyboard/) | Very pretty | More difficult. No physical insulation | ![Hardline hand wire](https://i.imgur.com/CnASmPo.jpg)
+| Bare wire with insulation added after (e.g. kapton tape) | [Matt3o's 65% on his website](https://matt3o.com/hand-wiring-a-custom-keyboard/) | Easier (no wire stripping required) | Not as attractive | ![Bare wire](https://i.imgur.com/AvXZShD.jpg)
+| Copper tape | [ManuForm Dactyl](https://github.com/tshort/dactyl-keyboard) | Very easy | Only really works when your plate/case aligns with the bottom of your switches | ![Copper tape](https://i.imgur.com/RFyNMlL.jpg)
+
+
+Note that these methods can be combined.  Prepare your lengths of wire before moving on to soldering.
+
+
+### A note on split keyboards
+
+If you are planning a split keyboard (e.g. Dactyl) each half will require a controller and a means of communicating between them (like a TRRS or hardwired cable).  Further information can be found in the [QMK split keyboard documentation.](feature_split_keyboard.md)
+
+
+### Soldering
+
+There are a lot of soldering guides and tips available elsewhere but here are some of the most useful and relevant for hand wiring:
+
+To ensure a strong solder joint you want a good amount of contact between the solder and the 2 peices of metal you are connecting, a good way of doing this (though not required) is looping around pins or twisting wires together before applying solder.
+
+<img src="https://i.imgur.com/eHJjmnU.jpg" alt="Looped around rod" width="200"/> <img src="https://i.imgur.com/8nbxmmr.jpg?1" alt="Looped diode leg" width="200"/>
+
+If your diodes are on a packaging strip and need a bend in them (either the start of a loop or for connecting to its neighbour) this can easily done by bending it over something straight like the edge of a box, table, or ruler.  This also helps keep track of the direction of the diode as all the bends will be on the same side.
+
+<img src="https://i.imgur.com/oITudbX.jpg" alt="Bent diode legs" width="200"/>
+
+If your iron has temperature control, set it to 315ºC (600ºF).
+
+Once heated, tin your soldering iron - this means melting a small amount of solder on the end of the iron and then quickly wiping it off on a wet sponge or wire cleaning pad, leaving a shiny silvery coating on the end which helps keep oxidisation at bay and helps solder to flow.
+
+When you come to apply the solder, hold the soldering iron against the two surfaces for a second to heat it, then apply a small amount of solder to join the two pieces together.  Heating the surfaces ensures that the solder adheres to it and that it does not cool too quickly.
+
+Don't hold the iron on the solder/joint longer than necessary. Heat will be conducted through the surfaces and can damage components (melt switch housings etc.).  Also, solder contains flux, which aids in ["wetting"](https://en.m.wikipedia.org/wiki/Wetting).  The longer heat is applied to the solder the more flux will evaporate meaning you may end up with a bad solder joint with peaks which, apart from looking bad, may also increase the risk of electrical shorts.
+
+The following collapsible section describes in detail how to solder rows using the bent diode technique and columns using short lengths of wire.
+
+<details>
+
+<summary>Click for details</summary>
 
 ## Soldering the Diodes
 
@@ -169,34 +270,52 @@ Before beginning to solder, it helps to have your wire pre-bent (if using single
 
 If you're not using any insulation, you can try to keep the column wires elevated, and solder them near the tips of the keyswitch contacts - if the wires are sturdy enough, they won't short out to the row wiring an diodes.
 
-## Wiring Things to the Teensy
+</details>
 
-Now that the matrix itself is complete, it's time to connect what you've done to the Teensy. You'll be needing the number of pins equal to your number of columns + your number of rows. There are some pins on the Teensy that are special, like D6 (the LED on the chip), or some of the UART, SPI, I2C, or PWM channels, but only avoid those if you're planning something in addition to a keyboard. If you're unsure about wanting to add something later, you should have enough pins in total to avoid a couple.
+# Wiring up the controller
 
-The pins you'll absolutely have to avoid are: GND, VCC, AREF, and RST - all the others are usable and accessible in the firmware.
+Now that the matrix itself is complete, it's time to connect what you've done to the microcontroller board.
 
-Place the Teensy where you plan to put it - you'll have to cut wires to length in the next step, and you'll want to make sure they reach.
+Place the microcontroller where you want it to be located, give thought to mounting and case alignment.  Bear in mind that the location of the USB socket can be different from the controller by using a short male to female cable if required,.
 
-Starting with the first column on the right side, measure out how much wire you'll need to connect it to the first pin on the Teensy - it helps to pick a side that you'll be able to work down, to keep the wires from overlapping too much. It may help to leave a little bit of slack so things aren't too tight. Cut the piece of wire, and solder it to the Teensy, and then the column - you can solder it anywhere along the column, but it may be easiest at the keyswitch. Just be sure the wire doesn't separate from the keyswitch when soldering.
+Find the pinout/documentation for your microcontroller board ([links here](#common-microcontroller-boards)) and make a note of all the digital I/O pins on it (note that on some controllers, like the teensy, analogue I/O can double as digital) as these are the pins you want to connect your wires to.
 
-As you move from column to column, it'll be helpful to write the locations of the pins down. We'll use this data to setup the matrix in the future.
+<details>
 
-When you're done with the columns, start with the rows in the same process, from top to bottom, and write them all down. Again, you can solder anywhere along the row, as long as it's after the diode - soldering before the diode (on the keyswitch side) will cause that row not to work.
+<summary>Specific instructions for the Teensy 2.0</summary>
 
-As you move along, be sure that the Teensy is staying in place - recutting and soldering the wires is a pain!
+ There are some pins on the Teensy that are special, like D6 (the LED on the chip), or some of the UART, SPI, I2C, or PWM channels, but only avoid those if you're planning something in addition to a keyboard. If you're unsure about wanting to add something later, you should have enough pins in total to avoid a couple.
 
-## Additional guides
+The pins you'll absolutely have to avoid, as with any controller, are: GND, VCC, AREF, and RST - all the others are usable and accessible in the firmware.
+
+</details>
+
+Cut wires to the length of the distance from the a point on each column/row to the controller.  You can solder anywhere along the row, as long as it's after the diode - soldering before the diode (on the keyswitch side) will cause that row not to work.
+
+Ribbon cable can be used to keep this extra tidy.  You may also want to consider routing the wires beneath the exisiting columns/rows.
+
+<img src="https://i.imgur.com/z2QlKfB.jpg" alt="Ribbon Cable" width="350"/>
+
+As you solder the wires to the controller make a note of which row/column is going to which pin on the controller as we'll use this data to setup the matrix when we create the firmware.
+
+As you move along, be sure that the controller is staying in place - recutting and soldering the wires is a pain!
 
-If you're more of a visual learner, or want some additional tips and something more to follow along, these two visual step by step guides may be helpful:
 
-- [BrownFox's step by step guide](https://deskthority.net/viewtopic.php?f=7&t=6050)
-- [Cribbit's modern hand wiring guide](https://geekhack.org/index.php?topic=87689.0)
 
 # Getting Some Basic Firmware Set Up
 
-From here, you should have a working keyboard once you program a firmware. Before we attach the Teensy permanently to the keyboard, let's quickly get some firmware loaded onto the Teensy so we can test each keyswitch.
+From here, you should have a working keyboard once you program a firmware.
 
-To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/) (paid) or [Visual Studio Code](https://code.visualstudio.com) (free).
+Simple firmware can be created easily using the [Keyboard Firmware Builder](https://kbfirmware.com/) website.  Recreate your layout using [Keyboard Layout Editor](http://www.keyboard-layout-editor.com), import it and recreate the matrix (if not already done as part of [planning the matrix](#planning-the-matrix).
+
+Go through the rest of the tabs, assigning keys until you get to the last one where you can compile and download your firmware.  The .hex file can be flashed straight onto your keyboard, and the .zip of source files can be modified for advanced functionality and compiled locally using the method described in the collapsable section below, or using the more comprehensive [getting started guide.](newbs_getting_started)
+
+
+<details>
+
+<summary>Creating and compiling your firmware locally (command line method)</summary>
+
+To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/) (paid) or [Visual Studio Code](https://code.visualstudio.com) (free).
 
 The first thing we're going to do is create a new keyboard. In your terminal, run this command, which will ask you some questions and generate a basic keyboard project:
 
@@ -319,9 +438,22 @@ Once everything is installed, running `make` in the terminal should get you some
 
 Once you have your `<project_name>.hex` file, open up the Teensy loader application, and click the file icon. From here, navigate to your `QMK/keyboards/<project_name>/` folder, and select the `<project_name>.hex` file. Plug in your keyboard and press the button on the Teensy - you should see the LED on the device turn off once you do. The Teensy Loader app will change a little, and the buttons should be clickable - click the download button (down arrow), and then the reset button (right arrow), and your keyboard should be ready to go!
 
+</details>
+
+## Flashing the Firmware
+
+Install [QMK toolbox](https://github.com/qmk/qmk_toolbox).
+
+![QMK Toolbox](https://i.imgur.com/86Cz30H.png)
+
+Under "Local File" navigate to your newly created .hex file.  Under "Microcontroller", select the corresponding one for your controller board (common ones available [here](#common-microcontroller-boards)).
+
+Plug in your keyboard and press the reset button (or short the Reset and Ground pins if there is no button) and click the "Flash" button in QMK toolbox.
+
+
 ## Testing Your Firmware
 
-Carefully flip your keyboard over, open up a new text document, and try typing - you should get the characters that you put into your keymap. Test each key, and note the ones that aren't working. Here's a quick trouble-shooting guide for non-working keys:
+Use a website such as [keyboard tester](https://www.keyboardtester.com/tester.html)/[keyboard checker](http://keyboardchecker.com/) or just open a text editor and try typing - you should get the characters that you put into your keymap. Test each key, and make a note of the ones that aren't working. Here's a quick trouble-shooting guide for non-working keys:
 
 0. Flip the keyboard back over and short the keyswitch's contacts with a piece wire - this will eliminate the possibility of the keyswitch being bad and needing to be replaced.
 1. Check the solder points on the keyswitch - these need to be plump and whole. If you touch it with a moderate amount of force and it comes apart, it's not strong enough.
@@ -330,11 +462,25 @@ Carefully flip your keyboard over, open up a new text document, and try typing -
 4. Check the solder joints on both sides of the wires going to/from the Teensy - the wires need to be fully soldered and connect to both sides.
 5. Check the `<project_name>.h` file for errors and incorrectly placed `KC_NO`s - if you're unsure where they should be, instead duplicate a k*xy* variable.
 6. Check to make sure you actually compiled the firmware and flashed the Teensy correctly. Unless you got error messages in the terminal, or a pop-up during flashing, you probably did everything correctly.
+7. Use a multimeter to check that the switch is actually closing when actuated (completing the circuit when pressed down).
 
 If you've done all of these things, keep in mind that sometimes you might have had multiple things affecting the keyswitch, so it doesn't hurt to test the keyswitch by shorting it out at the end.
 
-# Securing the Teensy, Finishing Your Hardware, Getting Fancier Firmware
+# Finishing up
+
+Once you have confirmed that the keyboard is working, if you have used a seperate (non handwire specific) controller you will want to secure it in place.  This can be done in many different ways e.g. hot glue, double sided sticky tape, 3D printed caddy, electrical tape.
+
+If you found this fullfilling you could experiment by adding additional features such as [in switch LEDs](https://geekhack.org/index.php?topic=94258.0), [in switch RGB](https://www.reddit.com/r/MechanicalKeyboards/comments/5s1l5u/photoskeyboard_science_i_made_a_handwired_rgb/), [RGB underglow](https://medium.com/@DavidNZ/hand-wired-custom-keyboard-cdd14429c7b3#.7a1ovebsk) or even an [OLED display!](https://www.reddit.com/r/olkb/comments/5zy7og/adding_ssd1306_oled_display_to_your_build/) 
+
+There are a lot of possibilities inside the firmware - explore [docs.qmk.fm](http://docs.qmk.fm) for a full feature list, and dive into the different keyboards to see how people use all of them. You can always stop by [the OLKB subreddit](http://reddit.com/r/olkb) or [QMK Discord](https://discord.gg/Uq7gcHh) for help!
+
+# Links to other guides:
+
+- [matt3o's step by step guide (BrownFox build)](https://deskthority.net/viewtopic.php?f=7&t=6050) also his [website](https://matt3o.com/hand-wiring-a-custom-keyboard/) and [video guide](https://www.youtube.com/watch?v=LVzpsjFWPP4)
+- [Cribbit's "Modern hand wiring guide - stronger, cleaner, easier"](https://geekhack.org/index.php?topic=87689.0) 
+- [Sasha Solomon's "Building my first Keyboard"](https://medium.com/@sachee/building-my-first-keyboard-and-you-can-too-512c0f8a4c5f)
+- [RoastPotatoes' "How to hand wire a Planck"](https://blog.roastpotatoes.co/guide/2015/11/04/how-to-handwire-a-planck/)
+- [Masterzen's "Handwired keyboard build log"](http://www.masterzen.fr/2018/12/16/handwired-keyboard-build-log-part-1/)
+
 
-Now that you have a working board, it's time to get things in their permanent positions. I've often used liberal amounts of hot glue to secure and insulate things, so if that's your style, start spreading that stuff like butter. Otherwise, double-sided tape is always an elegant solution, and electrical tape is a distant second. Due to the nature of these builds, a lot of this part is up to you and how you planned (or didn't plan) things out.
 
-There are a lot of possibilities inside the firmware - explore [docs.qmk.fm](http://docs.qmk.fm) for a full feature list, and dive into the different keyboards (Planck, Clueboard, Ergodox EZ, etc) to see how people use all of them. You can always stop by [the OLKB subreddit for help!](http://reddit.com/r/olkb)

docs/how_keyboards_work.md

@@ -35,7 +35,7 @@ USB for a given key.
 
 ## 3. What the Event Input/Kernel Does
 
-The *scancode* is mapped to a *keycode* dependent on the keyboard [60-keyboard.hwdb at Master](https://github.com/systemd/systemd/blob/master/hwdb/60-keyboard.hwdb). Without this mapping, the operating system will not receive a valid keycode and will be unable to do anything useful with that key press.
+The *scancode* is mapped to a *keycode* dependent on the keyboard [60-keyboard.hwdb at Master](https://github.com/systemd/systemd/blob/master/hwdb.d/60-keyboard.hwdb). Without this mapping, the operating system will not receive a valid keycode and will be unable to do anything useful with that key press.
 
 ## 4. What the Operating System Does
 

docs/keycodes.md

@@ -55,7 +55,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_EQUAL`             |`KC_EQL`                      |`=` and `+`                                    |
 |`KC_LBRACKET`          |`KC_LBRC`                     |`[` and `{`                                    |
 |`KC_RBRACKET`          |`KC_RBRC`                     |`]` and `}`                                    |
-|`KC_BSLASH`            |`KC_BSLS`                     |`\` and <code>&#124;</code>                    |
+|`KC_BSLASH`            |`KC_BSLS`                     |`\` and `\|`                                   |
 |`KC_NONUS_HASH`        |`KC_NUHS`                     |Non-US `#` and `~`                             |
 |`KC_SCOLON`            |`KC_SCLN`                     |`;` and `:`                                    |
 |`KC_QUOTE`             |`KC_QUOT`                     |`'` and `"`                                    |
@@ -106,7 +106,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_KP_9`              |`KC_P9`                       |Keypad `9` and Page Up                         |
 |`KC_KP_0`              |`KC_P0`                       |Keypad `0` and Insert                          |
 |`KC_KP_DOT`            |`KC_PDOT`                     |Keypad `.` and Delete                          |
-|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and <code>&#124;</code>             |
+|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and `\|`                            |
 |`KC_APPLICATION`       |`KC_APP`                      |Application (Windows Menu Key)                 |
 |`KC_POWER`             |                              |System Power (macOS)                           |
 |`KC_KP_EQUAL`          |`KC_PEQL`                     |Keypad `=`                                     |
@@ -143,7 +143,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_KP_EQUAL_AS400`    |                              |Keypad `=` on AS/400 keyboards                 |
 |`KC_INT1`              |`KC_RO`                       |JIS `\` and `_`                                |
 |`KC_INT2`              |`KC_KANA`                     |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and <code>&#124;</code>                |
+|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and `\|`                               |
 |`KC_INT4`              |`KC_HENK`                     |JIS Henkan                                     |
 |`KC_INT5`              |`KC_MHEN`                     |JIS Muhenkan                                   |
 |`KC_INT6`              |                              |JIS Numpad `,`                                 |
@@ -185,8 +185,8 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_AUDIO_MUTE`        |`KC_MUTE`                     |Mute                                           |
 |`KC_AUDIO_VOL_UP`      |`KC_VOLU`                     |Volume Up                                      |
 |`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`                     |Volume Down                                    |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track (Windows)                           |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track (Windows)                       |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track                                     |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track                                 |
 |`KC_MEDIA_STOP`        |`KC_MSTP`                     |Stop Track (Windows)                           |
 |`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`                     |Play/Pause Track                               |
 |`KC_MEDIA_SELECT`      |`KC_MSEL`                     |Launch Media Player (Windows)                  |
@@ -420,29 +420,29 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [US ANSI Shifted Symbols](keycodes_us_ansi_shifted.md)
 
-|Key                     |Aliases            |Description        |
-|------------------------|-------------------|-------------------|
-|`KC_TILDE`              |`KC_TILD`          |`~`                |
-|`KC_EXCLAIM`            |`KC_EXLM`          |`!`                |
-|`KC_AT`                 |                   |`@`                |
-|`KC_HASH`               |                   |`#`                |
-|`KC_DOLLAR`             |`KC_DLR`           |`$`                |
-|`KC_PERCENT`            |`KC_PERC`          |`%`                |
-|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`                |
-|`KC_AMPERSAND`          |`KC_AMPR`          |`&`                |
-|`KC_ASTERISK`           |`KC_ASTR`          |`*`                |
-|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`                |
-|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`                |
-|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`                |
-|`KC_PLUS`               |                   |`+`                |
-|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`                |
-|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`                |
-|`KC_PIPE`               |                   |<code>&#124;</code>|
-|`KC_COLON`              |`KC_COLN`          |`:`                |
-|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`                |
-|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`                |
-|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`                |
-|`KC_QUESTION`           |`KC_QUES`          |`?`                |
+|Key                     |Aliases            |Description|
+|------------------------|-------------------|-----------|
+|`KC_TILDE`              |`KC_TILD`          |`~`        |
+|`KC_EXCLAIM`            |`KC_EXLM`          |`!`        |
+|`KC_AT`                 |                   |`@`        |
+|`KC_HASH`               |                   |`#`        |
+|`KC_DOLLAR`             |`KC_DLR`           |`$`        |
+|`KC_PERCENT`            |`KC_PERC`          |`%`        |
+|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`        |
+|`KC_AMPERSAND`          |`KC_AMPR`          |`&`        |
+|`KC_ASTERISK`           |`KC_ASTR`          |`*`        |
+|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`        |
+|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`        |
+|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`        |
+|`KC_PLUS`               |                   |`+`        |
+|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`        |
+|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`        |
+|`KC_PIPE`               |                   |`\|`       |
+|`KC_COLON`              |`KC_COLN`          |`:`        |
+|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`        |
+|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`        |
+|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`        |
+|`KC_QUESTION`           |`KC_QUES`          |`?`        |
 
 ## [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
 

docs/keycodes_basic.md

@@ -85,7 +85,7 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 |`KC_EQUAL`       |`KC_EQL`           |`=` and `+`                                    |
 |`KC_LBRACKET`    |`KC_LBRC`          |`[` and `{`                                    |
 |`KC_RBRACKET`    |`KC_RBRC`          |`]` and `}`                                    |
-|`KC_BSLASH`      |`KC_BSLS`          |`\` and <code>&#124;</code>                    |
+|`KC_BSLASH`      |`KC_BSLS`          |`\` and `\|`                                   |
 |`KC_NONUS_HASH`  |`KC_NUHS`          |Non-US `#` and `~`                             |
 |`KC_SCOLON`      |`KC_SCLN`          |`;` and `:`                                    |
 |`KC_QUOTE`       |`KC_QUOT`          |`'` and `"`                                    |
@@ -93,7 +93,7 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 |`KC_COMMA`       |`KC_COMM`          |`,` and `<`                                    |
 |`KC_DOT`         |                   |`.` and `>`                                    |
 |`KC_SLASH`       |`KC_SLSH`          |`/` and `?`                                    |
-|`KC_NONUS_BSLASH`|`KC_NUBS`          |Non-US `\` and <code>&#124;</code>             |
+|`KC_NONUS_BSLASH`|`KC_NUBS`          |Non-US `\` and `\|`                            |
 
 ## Lock Keys
 
@@ -121,26 +121,26 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## International
 
-|Key       |Aliases  |Description                    |
-|----------|---------|-------------------------------|
-|`KC_INT1` |`KC_RO`  |JIS `\` and `_`                |
-|`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana          |
-|`KC_INT3` |`KC_JYEN`|JIS `¥` and <code>&#124;</code>|
-|`KC_INT4` |`KC_HENK`|JIS Henkan                     |
-|`KC_INT5` |`KC_MHEN`|JIS Muhenkan                   |
-|`KC_INT6` |         |JIS Numpad `,`                 |
-|`KC_INT7` |         |International 7                |
-|`KC_INT8` |         |International 8                |
-|`KC_INT9` |         |International 9                |
-|`KC_LANG1`|`KC_HAEN`|Hangul/English                 |
-|`KC_LANG2`|`KC_HANJ`|Hanja                          |
-|`KC_LANG3`|         |JIS Katakana                   |
-|`KC_LANG4`|         |JIS Hiragana                   |
-|`KC_LANG5`|         |JIS Zenkaku/Hankaku            |
-|`KC_LANG6`|         |Language 6                     |
-|`KC_LANG7`|         |Language 7                     |
-|`KC_LANG8`|         |Language 8                     |
-|`KC_LANG9`|         |Language 9                     |
+|Key       |Aliases  |Description          |
+|----------|---------|---------------------|
+|`KC_INT1` |`KC_RO`  |JIS `\` and `_`      |
+|`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana|
+|`KC_INT3` |`KC_JYEN`|JIS `¥` and `\|`     |
+|`KC_INT4` |`KC_HENK`|JIS Henkan           |
+|`KC_INT5` |`KC_MHEN`|JIS Muhenkan         |
+|`KC_INT6` |         |JIS Numpad `,`       |
+|`KC_INT7` |         |International 7      |
+|`KC_INT8` |         |International 8      |
+|`KC_INT9` |         |International 9      |
+|`KC_LANG1`|`KC_HAEN`|Hangul/English       |
+|`KC_LANG2`|`KC_HANJ`|Hanja                |
+|`KC_LANG3`|         |JIS Katakana         |
+|`KC_LANG4`|         |JIS Hiragana         |
+|`KC_LANG5`|         |JIS Zenkaku/Hankaku  |
+|`KC_LANG6`|         |Language 6           |
+|`KC_LANG7`|         |Language 7           |
+|`KC_LANG8`|         |Language 8           |
+|`KC_LANG9`|         |Language 9           |
 
 ## Commands
 
@@ -191,7 +191,7 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 These keycodes are not part of the Keyboard/Keypad usage page. The `SYSTEM_` keycodes are found in the Generic Desktop page, and the rest are located in the Consumer page.
 
-Windows and macOS use different keycodes for "next track" and "previous track". Make sure you choose the keycode that corresponds to your OS.
+?> Some of these keycodes may behave differently depending on the OS. For example, on macOS, the keycodes `KC_MEDIA_FAST_FORWARD`, `KC_MEDIA_REWIND`, `KC_MEDIA_NEXT_TRACK` and `KC_MEDIA_PREV_TRACK` skip within the current track when held, but skip the entire track when tapped.
 
 |Key                    |Aliases  |Description                  |
 |-----------------------|---------|-----------------------------|
@@ -201,8 +201,8 @@ Windows and macOS use different keycodes for "next track" and "previous track".
 |`KC_AUDIO_MUTE`        |`KC_MUTE`|Mute                         |
 |`KC_AUDIO_VOL_UP`      |`KC_VOLU`|Volume Up                    |
 |`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`|Volume Down                  |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track (Windows)         |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track (Windows)     |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track                   |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track               |
 |`KC_MEDIA_STOP`        |`KC_MSTP`|Stop Track (Windows)         |
 |`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`|Play/Pause Track             |
 |`KC_MEDIA_SELECT`      |`KC_MSEL`|Launch Media Player (Windows)|

docs/keycodes_us_ansi_shifted.md

@@ -12,26 +12,26 @@ To fix this, open Remote Desktop Connection, click on "Show Options", open the t
 
 ## Keycodes
 
-|Key                     |Aliases            |Description        |
-|------------------------|-------------------|-------------------|
-|`KC_TILDE`              |`KC_TILD`          |`~`                |
-|`KC_EXCLAIM`            |`KC_EXLM`          |`!`                |
-|`KC_AT`                 |                   |`@`                |
-|`KC_HASH`               |                   |`#`                |
-|`KC_DOLLAR`             |`KC_DLR`           |`$`                |
-|`KC_PERCENT`            |`KC_PERC`          |`%`                |
-|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`                |
-|`KC_AMPERSAND`          |`KC_AMPR`          |`&`                |
-|`KC_ASTERISK`           |`KC_ASTR`          |`*`                |
-|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`                |
-|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`                |
-|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`                |
-|`KC_PLUS`               |                   |`+`                |
-|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`                |
-|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`                |
-|`KC_PIPE`               |                   |<code>&#124;</code>|
-|`KC_COLON`              |`KC_COLN`          |`:`                |
-|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`                |
-|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`                |
-|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`                |
-|`KC_QUESTION`           |`KC_QUES`          |`?`                |
+|Key                     |Aliases            |Description|
+|------------------------|-------------------|-----------|
+|`KC_TILDE`              |`KC_TILD`          |`~`        |
+|`KC_EXCLAIM`            |`KC_EXLM`          |`!`        |
+|`KC_AT`                 |                   |`@`        |
+|`KC_HASH`               |                   |`#`        |
+|`KC_DOLLAR`             |`KC_DLR`           |`$`        |
+|`KC_PERCENT`            |`KC_PERC`          |`%`        |
+|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`        |
+|`KC_AMPERSAND`          |`KC_AMPR`          |`&`        |
+|`KC_ASTERISK`           |`KC_ASTR`          |`*`        |
+|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`        |
+|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`        |
+|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`        |
+|`KC_PLUS`               |                   |`+`        |
+|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`        |
+|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`        |
+|`KC_PIPE`               |                   |`\|`       |
+|`KC_COLON`              |`KC_COLN`          |`:`        |
+|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`        |
+|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`        |
+|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`        |
+|`KC_QUESTION`           |`KC_QUES`          |`?`        |

docs/newbs_flashing.md

@@ -86,7 +86,23 @@ Click the `Flash` button in QMK Toolbox. You will see output similar to the foll
 
 ## Flash your Keyboard from the Command Line
 
-First thing you'll need to know is which bootloader that your keyboard uses.  There are four main bootloaders that are used, usually. Pro-Micro and clones use CATERINA, and Teensy's use Halfkay, OLKB boards use QMK-DFU, and other atmega32u4 chips use DFU. 
+This has been made pretty simple compared to what it used to be.  When you are ready to compile and flash your firmware, open up your terminal window and run the build command: 
+
+    make <my_keyboard>:<my_keymap>:flash
+
+For example, if your keymap is named "xyverz" and you're building a keymap for a rev5 planck, you'll use this command:
+
+    make planck/rev5:xyverz:flash
+
+This will check the keyboard's configuration, and then attempt to flash it based on the specified bootloader.  This means that you don't need to know which bootloader that your keyboard uses.  Just run the command, and let the command do the heavy lifting.
+
+However, this does rely on the bootloader being set by the keyboard.  If this information is not configured, or you're using a board that doesn't have a supported target to flash it, you will see this error:
+
+    WARNING: This board's bootloader is not specified or is not supported by the ":flash" target at this time.
+
+In this case, you'll have to fall back on specifying the bootloader.
+
+There are five main bootloaders that are used. Pro Micro and clones use Caterina, Teensys use HalfKay, OLKB's AVR boards use QMK-DFU, other ATmega32U4 boards use DFU, and most ARM boards use ARM DFU.
 
 You can find more information about the bootloaders in the [Flashing Instructions and Bootloader Information](flashing.md) page. 
 
@@ -216,11 +232,14 @@ If you have any issues with this, you may need to this:
     sudo make <my_keyboard>:<my_keymap>:avrdude
 
 
-Additionally, if you want to flash multiple boards, use the following command:
+#### Caterina commands
 
-    make <keyboard>:<keymap>:avrdude-loop
+There are a number of DFU commands that you can use to flash firmware to a DFU device:
 
-When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
+* `:avrdude` - This is the normal option which waits until a Caterina device is available (by detecting a new COM port), and then flashes the firmware.
+* `:avrdude-loop` - This runs the same command as `:avrdude`, but after each device is flashed, it will attempt to flash again.  This is useful for bulk flashing. _This requires you to manually escape the loop by hitting Control+C._
+* `:avrdude-split-left` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._
+* `:avrdude-split-right` - This flashes the normal firmware, just like the default option (`:avrdude`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Pro Micro based split keyboards._
 
 
 ### HalfKay
@@ -256,42 +275,6 @@ Programming.....................................................................
 Booting
 ```
 
-### BootloadHID
-
-For Bootmapper Client(BMC)/bootloadHID/ATmega32A based boards, when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
-
-    make <my_keyboard>:<my_keymap>:bootloaderHID
-
-For example, if your keymap is named "xyverz" and you're building a keymap for a jj40, you'll use this command:
-
-    make jj40:xyverz:bootloaderHID
-
-Once the firmware finishes compiling, it will output something like this: 
-
-```
-Linking: .build/jj40_default.elf                                                                   [OK]
-Creating load file for flashing: .build/jj40_default.hex                                           [OK]
-Copying jj40_default.hex to qmk_firmware folder                                                    [OK]
-Checking file size of jj40_default.hex                                                             [OK]
- * The firmware size is fine - 21920/28672 (6752 bytes free)
-```
-
-After it gets to this point, the build script will look for the DFU bootloader every 5 seconds.  It will repeat the following until the device is found or you cancel it. 
-
-```
-Error opening HIDBoot device: The specified device was not found
-Trying again in 5s.
-```
-
-Once it does this, you'll want to reset the controller.  It should then show output similar to this: 
-
-```
-Page size   = 128 (0x80)
-Device size = 32768 (0x8000); 30720 bytes remaining
-Uploading 22016 (0x5600) bytes starting at 0 (0x0)
-0x05580 ... 0x05600
-```
-
 ### STM32 (ARM)
 
 For a majority of ARM boards (including the Proton C, Planck Rev 6, and Preonic Rev 3), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
@@ -346,11 +329,47 @@ Transitioning to dfuMANIFEST state
 
 There are a number of DFU commands that you can use to flash firmware to a STM32 device:
 
-* `:dfu-util` - The default command for flashing to STM32 devices. 
-* `:dfu-util-wait` - This works like the default command, but it gives you a (configurable) 10 second timeout before it attempts to flash the firmware.  You can use `TIME_DELAY=20` from the command line to change the timeout.
-   * Eg: `make <keyboard>:<keymap>:dfu-util TIME_DELAY=5`
+* `:dfu-util` - The default command for flashing to STM32 devices, and will wait until an STM32 bootloader is present. . 
 * `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards.
 * `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards.
+* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 
+
+
+### BootloadHID
+
+For Bootmapper Client(BMC)/bootloadHID/ATmega32A based boards, when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
+
+    make <my_keyboard>:<my_keymap>:bootloaderHID
+
+For example, if your keymap is named "xyverz" and you're building a keymap for a jj40, you'll use this command:
+
+    make jj40:xyverz:bootloaderHID
+
+Once the firmware finishes compiling, it will output something like this: 
+
+```
+Linking: .build/jj40_default.elf                                                                   [OK]
+Creating load file for flashing: .build/jj40_default.hex                                           [OK]
+Copying jj40_default.hex to qmk_firmware folder                                                    [OK]
+Checking file size of jj40_default.hex                                                             [OK]
+ * The firmware size is fine - 21920/28672 (6752 bytes free)
+```
+
+After it gets to this point, the build script will look for the DFU bootloader every 5 seconds.  It will repeat the following until the device is found or you cancel it. 
+
+```
+Error opening HIDBoot device: The specified device was not found
+Trying again in 5s.
+```
+
+Once it does this, you'll want to reset the controller.  It should then show output similar to this: 
+
+```
+Page size   = 128 (0x80)
+Device size = 32768 (0x8000); 30720 bytes remaining
+Uploading 22016 (0x5600) bytes starting at 0 (0x0)
+0x05580 ... 0x05600
+```
 
 ## Test It Out!
 

docs/ru-ru/README.md

@@ -0,0 +1,32 @@
+# Quantum Mechanical Keyboard Firmware
+
+[![Current Version](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)
+[![Build Status](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware)
+[![Discord](https://img.shields.io/discord/440868230475677696.svg)](https://discord.gg/Uq7gcHh)
+[![Docs Status](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm)
+[![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
+[![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
+
+## Что такое QMK Firmware?
+
+QMK (*Quantum Mechanical Keyboard*) — это сообщество, работающее над ПО с открытым исходным кодом, которое разрабатывает QMK Firmware, QMK Toolbox, qmk.fm и эту документацию. QMK Firmware — это прошивка для клавиатур, основанная на [tmk\_keyboard](http://github.com/tmk/tmk_keyboard) с множеством полезных функций для микроконтроллеров Atmel AVR, а именно, для продуктов компаний [OLKB](http://olkb.com), [ErgoDox EZ](http://www.ergodox-ez.com) и [Clueboard](http://clueboard.co/). Она также была портирована на чипы ARM при помощи ChibiOS. Вы можете использовать ее для клавиатуры, собранной вручную или имеющей нестандартную печатную плату.
+
+## Как скачать
+
+Если вы собираетесь добавить раскладку, клавиатуру или новые функции в QMK, то самый простой путь реализации — это [сделать форк репозитория на GitHub](https://github.com/qmk/qmk_firmware#fork-destination-box), клонировать ваш репозиторий локально для дальнейшего внесения изменений, сделать пуш изменений, а затем открыть [пулреквест](https://github.com/qmk/qmk_firmware/pulls) из вашего форка.
+
+Также вы можете либо скачать репозиторий ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), либо клонировать его через git (`git@github.com:qmk/qmk_firmware.git`) или https (`https://github.com/qmk/qmk_firmware.git`).
+
+## Как скомпилировать
+
+Перед компиляцией вам необходимо [настроить окружение](ru-ru/getting_started_build_tools.md) разработчика для AVR или/и ARM. После этого используйте команду `make` со следующим синтаксисом, чтобы собрать клавиатуру и раскладку:
+
+    make planck/rev4:default
+
+Данная команда соберет ревизию `rev4` клавиатуры `planck` с раскладкой `default`. Не все клавиатуры имеют ревизии (они также называются subprojects или folders), в этом случае она может быть опущена:
+
+    make preonic:default
+
+## Как настроить
+
+QMK обладает множеством [функций](ru-ru/features.md) для исследования, и [справочная документация](http://docs.qmk.fm) может стать хорошей отправной точкой для знакомства с ними. Большинством функций можно воспользоваться модифицируя [раскладку](ru-ru/keymap.md) и изменяя [коды клавиш](ru-ru/keycodes.md).

docs/ru-ru/getting_started_build_tools.md

@@ -0,0 +1,168 @@
+# Установка инструментов для сборки
+
+Данная страница описывает процесс установки окружения для сборки QMK. Эти инструкции относятся к процессорам AVR (таким как atmega32u4).
+
+<!-- FIXME: Нужно написать и добавить куда-нибудь инструкции для ARM. -->
+
+**Примечание:** Если вы здесь впервые, ознакомьтесь с [Руководством для полных новичков](ru-ru/newbs.md).
+
+Прежде, чем продолжить, убедитесь, что у вас обновлены подмодули (сторонние библиотеки), выполнив `make git-submodule`.
+
+## Linux
+
+Чтобы всегда быть уверенными, что у вас установлены последние версии ПО, можно просто выполнить команду `sudo util/qmk_install.sh`. Она должна установить все необходимые зависимости. **Это выполнит `apt-get upgrade`.**
+
+Вы также можете устанавливать все вручную, но в данной документации список требований может не всегда быть актуальным.
+
+Текущие требования представлены ниже, но не все они могут быть необходимы, так как зависят от того, что вы делаете. Также стоит отметить, что в некоторых системах не все зависимости доступны в виде пакетов, или они могут называться по-другому.
+
+```
+build-essential
+gcc
+unzip
+wget
+zip
+gcc-avr
+binutils-avr
+avr-libc
+dfu-programmer
+dfu-util
+gcc-arm-none-eabi
+binutils-arm-none-eabi
+libnewlib-arm-none-eabi
+git
+```
+
+Установите все зависимости при помощи вашего любимого менеджера пакетов.
+
+Пример для Debian / Ubuntu:
+
+    sudo apt-get update
+    sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
+
+Пример для Fedora / Red Hat:
+
+    sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
+    
+Пример для Arch / Manjaro:
+
+    pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git dfu-programmer dfu-util
+
+## Nix
+
+Если вы используете [NixOS](https://nixos.org/), или у вас установлена Nix в Linux или macOS, выполните `nix-shell` из корня репозитория, чтобы настроить окружение для сборки.
+
+По умолчанию, это скачает компиляторы для AVR и ARM. Если вам не нужны они оба, отключите `avr` или `arm` с помощью аргумента, например:
+
+    nix-shell --arg arm false
+
+## macOS
+
+Если вы пользуетесь [Homebrew](https://brew.sh/), вы можете использовать следующие команды:
+
+    brew tap osx-cross/avr
+    brew tap PX4/homebrew-px4
+    brew update
+    brew install avr-gcc@8
+    brew link --force avr-gcc@8
+    brew install dfu-programmer
+    brew install dfu-util
+    brew install gcc-arm-none-eabi
+    brew install avrdude
+
+Данный метод является рекомендуемым. Если у вас нет Homebrew, [установите его!](http://brew.sh/) Он очень сильно пригодится тем, кто работает с командной строкой. Стоит отметить, что часть с `make` и `make install` во время установки `avr-gcc@8` из Homebrew может занимать более 20 минут и сильно нагружать CPU.
+
+## Windows с MSYS2 (рекомендуется)
+
+Наилучшим окружение для Windows Vista и всех последующих версий (тестировалось с 7 и 10) является [MSYS2](https://www.msys2.org).
+
+* Для установки MSYS2, скачайте его и следуйте дальнейшим указаниям отсюда: http://www.msys2.org
+* Откройте ``MSYS2 MingGW 64-bit`` ярлык
+* Перейдите в свой репозиторий QMK. Например, если он находится в корне вашего диска C:
+  * `$ cd /c/qmk_firmware`
+* Запустите `util/qmk_install.sh` и следуйте подсказкам
+
+## Windows 10 (устарело)
+
+Это устаревшие инструкции для Windows 10. Мы рекомендуем использовать [MSYS2, как сказано выше](#windows-с-msys2-рекомендуется).
+
+### Обновление для дизайнеров (Creators Update)
+
+Если у вас Windows 10 с Обновлением для дизайнеров или новее, вы можете собрать прошивку и прошить ей напрямую. До Обновления для дизайнеров было возможно только собрать прошивку. Если у вас его еще нет, или вы не уверены, следуйте [этим инструкциям](https://support.microsoft.com/en-us/instantanswers/d4efb316-79f0-1aa1-9ef3-dcada78f3fa0/get-the-windows-10-creators-update).
+
+### Подсистема Windows для Linux (Windows Subsystem for Linux, WSL)
+
+В дополнение к Обновлению для дизайнеров вам необходима подсистема Windows для Linux, поэтому установите ее, следуя [иснтрукциям здесь](http://www.howtogeek.com/249966/how-to-install-and-use-the-linux-bash-shell-on-windows-10/). Если у вас уже есть подсистема Windows для Linux из Юбилейного обновления (Anniversary update), рекомендуется ее [обновить](https://betanews.com/2017/04/14/upgrade-windows-subsystem-for-linux/) до 16.04LTS, потому что некоторые клавиатуры не компилируются с набором инструментов из 14.04LTS. Стоит отметить, что вы четко должны понимать, что вы делаете, если выбрали метод `sudo do-release-upgrade`.
+
+### Git
+
+Если вы уже клонировали репозиторий в файловую систему Windows, вы можете пропустить данную секцию.
+
+Вам нужно клонировать репозиторий в файловую систему Windows при помощи обычного Git для Windows, а **не** WSL Git. Так что, если вы ещё не установили Git, [скачайте](https://git-scm.com/download/win) и установите его. Затем [настройте его](https://git-scm.com/book/en/v2/Getting-Started-First-Time-Git-Setup). Важно указать свой адрес электронной почты и имя пользователя, особенно если вы планируете вносить свой вклад в проект.
+
+Как только Git будет установлен, откройте командную строку Git Bash и поменяйте директорию на ту, в которую хотите клонировать QMK; обратите внимание, что вы должны использовать косую черту, и что доступ к вашему диску C осуществляется примерно так: `/c/path/to/where/you/want/to/go`. Затем выполните `git clone --recurse-submodules https://github.com/qmk/qmk_firmware`, это создаст новую папку `qmk_firmware` в текущей директории.
+
+### Установка инструментов (Toolchain)
+
+Установка инструментов (Toolchain) осуществляется через подсистему Windows для Linux, и процесс полностью автоматизирован. Если вы хотите выполнить установку вручную, то не существует никакой другой инструкции помимо самого скрипта. Однако, вы всегда можете открыть ишью и запросить дополнительную информацию.
+
+1. Откройте "Bash On Ubuntu On Windows" в меню Пуск.
+2. Перейдите в папку, в которую клонирована `qmk_firmware`. Обратите внимание, что пути начинаются с `/mnt/` в WSL, так что вы должны написать, например, `cd /mnt/c/path/to/qmk_firmware`.
+3. Запустите `util/wsl_install.sh` и следуйте инструкциям на экране.
+4. Закройте окно командной строки Bash, и откройте его снова.
+5. Все готово, чтобы скомпилировать прошивку и прошить ей!
+
+### Несколько важных вещей, которые надо запомнить
+
+* Вы можете запустить `util/wsl_install.sh` еще раз, чтобы установить все последние обновления.
+* Ваш репозиторий QMK должен находиться в файловой системе Windows, поскольку WSL не может запускать выполняемые файлы извне.
+* WSL Git **не** совместим с Windows Git, поэтому используйте Windows Git Bash или Windows Git GUI для всех операций с Git.
+* Вы можете изменять файлы как внутри WSL, так и просто через Windows. Но обратите внимание, что если вы изменяете makefiles или сценарии командной строки, вы должны убедиться, что используете текстовый редактор, который сохраняет файлы с переводом строки в стиле Unix (Unix line endings). В противном случае компиляция может не работать.
+
+## Windows (Vista и новее) (устарело)
+
+Это устаревшие инструкции для Windows Vista и более новых версий. Мы рекомендуем использовать [MSYS2, как сказано выше](#windows-с-msys2-рекомендуется).
+
+1. Если вы когда-то устанавливали WinAVR, удалите его.
+2. Установите [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Отключите smatch, но **оставьте галочку напротив опции добавления инструмента в PATH**.
+3. Если вы собираетесь прошивать клавиатуры на базе Infinity, вам нужно установить dfu-util. Обратитесь к инструкциям от [Input Club](https://github.com/kiibohd/controller/wiki/Loading-DFU-Firmware).
+4. Установите [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). Во время установки отключите опцию установки графического пользовательского интерфейса. **НЕ ИЗМЕНЯЙТЕ директорию для установки по умолчанию.** Скрипты зависят от расположения по умолчанию.
+5. Выполните клонирование данного репозитория. [Эта ссылка скачает его в виде zip-файла, который вам нужно будет разархивировать.](https://github.com/qmk/qmk_firmware/archive/master.zip) Откройте извлеченную папку в проводнике Windows.
+6. Перейдите в папку `\util`.
+7. Запустите двойным щелчком пакетный файл сценария `1-setup-path-win`. Вам нужно будет согласиться с уведомлением контроля учетных записей пользователей (User Account Control, UAC). Нажмите пробел, чтобы закрыть появившееся сообщение об успешном выполнении операции в командной строке.
+8. Кликните правой кнопкой по пакетному файлу сценария `2-setup-environment-win`, выберите "Запуск от имени администратора" и согласитесь с уведомлением UAC. Это может занять пару минут, и вам потребуется подтвердить установку драйвера. Как только сценарий завершит свою работу, ваше окружение будет готово!
+
+Если у вас возникли проблемы и вам нужна помощь, будет полезно сгенерировать файл *Win_Check_Output.txt*, запустив `Win_Check.bat` в папке `\util`.
+
+## Docker
+
+Если это немного сложновато для вас, Docker может стать готовым решением, которое вы ищите. После установки [Docker CE](https://docs.docker.com/install/#supported-platforms) выполните следующую команду из директории `qmk_firmware`, чтобы собрать клавиатуру/раскладку:
+
+```bash
+util/docker_build.sh keyboard:keymap
+# Например: util/docker_build.sh ergodox_ez:steno
+```
+
+Это скомпилирует указанную клавиатуру/раскладку и создаст для вас `.hex` или `.bin` файл с результатом, готовым к процессу прошивки, в директории QMK. Если опустить `:keymap`, будет использована раскладка `default`. Заметьте, что формат параметров такой же, как и в случае сборки командой `make`.
+
+Вы также можете запустить скрипт без параметров. Тогда он попросит вас ввести поочередно параметры сборки. Возможно, вам это покажется более удобным:
+
+```bash
+util/docker_build.sh
+# Читает параметры из пользовательского ввода (оставьте пустым для значений по умолчанию)
+```
+
+Также имеется поддержка сборки _и_ прошивки клавиатуры прямо из Docker. Для этого укажите еще один параметр `target`:
+
+```bash
+util/docker_build.sh keyboard:keymap:target
+# Например: util/docker_build.sh planck/rev6:default:dfu-util
+```
+
+Если вы используете Linux, это должно работать прямо из коробки. На Windows и macOS это требует запуска [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/). Ее довольно утомительно настраивать, поэтому мы не рекомендуем это; используйте вместо этого [QMK Toolbox](https://github.com/qmk/qmk_toolbox).
+
+!> Docker для Windows требует включения [Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v). Это означает, что он не работает на версиях Windows без Hyper-V, например, на Windows 7, Windows 8 и **Windows 10 Home**.
+
+## Vagrant
+
+Если у вас возникли проблемы при сборке прошивки, вы можете попробовать установить инструмент под названием Vagrant. Он сконфигурирует виртуальный компьютер с такими параметрами, которые подходят для сборки прошивки. У OLKB НЕТ файлов такого виртуально компьютера. Подробности о том, как настроить Vagrant, можно найти в [Руководстве по Vagrant](ru-ru/getting_started_vagrant.md).

docs/ru-ru/newbs.md

@@ -0,0 +1,23 @@
+# Руководство по QMK для полных новичков
+
+QMK ― это мощная прошивка с открытым исходным кодом для вашей механической клавиатуры. Вы можете использовать QMK для легкой и мощной персонализации своей клавиатуры. Люди с разным уровнем умений, от совсем новичков до крутых программистов, успешно применяли QMK, чтобы персонализировать свои клавиатуры. Данное руководство поможет вам сделать то же самое, независимо от уровня вашего мастерства.
+
+Не уверены, поддерживает ли ваша клавиатура QMK? Если это механическая клавиатура, которую вы собрали сами, шансы достаточно велики. Мы поддерживаем [большое число любительских клавиатур](https://qmk.fm/keyboards/), поэтому, даже если ваша текущая клавиатура не совместима с QMK, у вас не должно возникнуть проблем с нахождением подходящей для ваших нужд.
+
+## Обзор
+
+В данном руководстве 7 основных секций:
+
+* [Первое знакомство](ru-ru/newbs_getting_started.md)
+* [Собираем вашу первую прошивку с помощью командной строки](ru-ru/newbs_building_firmware.md)
+* [Собираем вашу первую прошивку с помощью онлайн GUI](ru-ru/newbs_building_firmware_configurator.md)
+* [Прошиваем файл прошивки](ru-ru/newbs_flashing.md)
+* [Тестируем и отлаживаем](ru-ru/newbs_testing_debugging.md)
+* [Лучшие практики по Git](ru-ru/newbs_best_practices.md)
+* [Узнайте больше на этих ресурсах](ru-ru/newbs_learn_more_resources.md)
+
+Данное руководство сосредоточено на помощи тем, кто никогда раньше не компилировал ПО. Приятие решений и рекомендации делаются с учетом именно этого. Существует много альтернативных методов для описанных процедур, и мы поддерживаем большинство из них. Если у вас есть сомнения о том, как выполнить задачу, вы можете [попросить у нас совета](ru-ru/getting_started_getting_help.md).
+
+## Дополнительные ресурсы
+
+* [Блог Томаса Баарта (Thomas Baart) об основах QMK](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – Созданный пользователем блог, охватывающий основы использования QMK Firmware с точки зрения нового пользователя.

docs/ru-ru/newbs_getting_started.md

@@ -0,0 +1,102 @@
+# Введение
+
+У вашей компьютерной клавиатуры внутри есть процессор, похожий на тот, что внутри вашего компьютера. Этот процессор выполняет программное обеспечение, которое отвечает за обнаружение нажатий клавиш и отсылку сигналов состояния клавиатуры, когда клавиши нажимаются и отпускаются. Роль такого ПО выполняет QMK, детектируя нажатия клавиш и отсылая эту информацию главному компьютеру. Сбор собственной раскладки эквивалентен сборке выполняемой программы для вашей клавиатуры.
+
+QMK старается дать вам большую силу, оставляя простые вещи легкими и делай сложные — возможными. Вам не надо уметь программировать, чтобы создавать мощные прошивки — вам только надо следовать нескольким простым синтаксическим правилам.
+
+# Первое знакомство
+
+Перед тем, как вы сможете собирать раскладки, вам необходимо установить некоторое программное обеспечение и настроить ваше окружение для сборки. Это нужно сделать только один раз, вне зависимости от того, для скольких клавиатур вы планируете компилировать прошивки.
+
+Если вы предпочитаете графический пользовательский интерфейс, пожалуйста, рассмотрите возможность использования онлайн [QMK Конфигуратора](https://config.qmk.fm). Пожалуйста, обратитесь к [Собираем вашу первую прошивку с помощью онлайн GUI](ru-ru/newbs_building_firmware_configurator.md). 
+
+
+## Загрузка ПО
+
+### Текстовый редактор
+
+Вам понадобится программа, умеющая редактировать и сохранять **обычные текстовые** файлы. Если вы используете Windows, вы можете делать это Блокнотом, а в Linux вы можете использовать gedit. Обе программы являются простыми, но функциональными редакторами. В macOS остерегайтесь стандартного приложения TextEdit: он не будет сохранять обычные текстовые файлы, пока вы явно не выберите _Make Plain Text_ из меню _Format_.
+
+Вы также можете скачать и установить отдельный текстовый редактор наподобие [Sublime Text](https://www.sublimetext.com/) или [VS Code](https://code.visualstudio.com/). Возможно, это наилучший вариант независимо от платформы, поскольку эти программы сделаны специально для редактирования кода.
+
+?> Не уверены, какой выбрать текстовый редактор? Лоуренс Брэдфорд (Laurence Bradford) написал [отличное введение](https://learntocodewith.me/programming/basics/text-editors/) в тему.
+
+### QMK Toolbox
+
+QMK Toolbox является дополнительной графической программой для Windows и macOS, которая позволяет вам разрабатывать и отлаживать вашу клавиатуру. Вы, вероятно, посчитаете ее бесценной для легкого процесса прошивки вашей клавиатуры и просмотра отладочных сообщений, которые она отображает.
+
+[Скачайте последний выпуск здесь.](https://github.com/qmk/qmk_toolbox/releases/latest)
+
+* Для Windows: `qmk_toolbox.exe` (переносимое приложение) или `qmk_toolbox_install.exe` (установщик)
+* Для macOS: `QMK.Toolbox.app.zip` (переносимое приложение) или `QMK.Toolbox.pkg` (установщик)
+
+## Настройте ваше окружение
+
+Мы постарались сделать установку QMK максимально легкой. Вам нужно только подготовить ваше Linux или Unix окружение, после этого позвольте QMK установить все остальное.
+
+?> Если вы никогда раньше не работали с командной строкой Linux/Unix, существует несколько базовых концептов и команд, которые необходимо выучить. Эти ресурсы дадут вам достаточно знаний, чтобы работать с QMK:<br>
+[Обязательные к изучению команды Linux](https://www.guru99.com/must-know-linux-commands.html)<br>
+[Несколько базовых команд Unix](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
+
+### Windows
+
+Вам нужно будет установить MSYS2 и Git.
+
+* Следуйте инструкциям по установки на [домашней странице MSYS2](https://www.msys2.org).
+* Закройте все открытые терминалы MSYS2 и откройте новый терминал MSYS2 MinGW 64-bit.
+* Установите Git, выполнив эту команду: `pacman -S git`.
+
+### macOS
+
+Вам нужно будет установить Homebrew. Следуйте инструкциям на [домашней странице Homebrew](https://brew.sh).
+
+После установки Homebrew продолжите чтение с _Установите QMK_. На этом шаге вам надо будет запустить скрипт, который установит остальные пакеты.
+
+### Linux
+
+Вам нужно будет установить Git. Скорее всего, он у вас уже есть, но если нет, одна из следующих команд должна установить его:
+
+* Debian / Ubuntu / Devuan: `apt-get install git`
+* Fedora / Red Hat / CentOS: `yum install git`
+* Arch: `pacman -S git`
+
+?> Docker также является вариантом для всех платформ. [Нажмите сюда для получения подробностей.](ru-ru/getting_started_build_tools.md#docker)
+
+## Установите QMK
+
+Как только вы настроили ваше Linux/Unix окружение, вы готовы к загрузке QMK. Мы сделаем это при помощи Git, "клонировав" репозиторий QMK. Откройте Терминал или окно MSYS2 MinGW и оставьте его открытым до конца данного руководства. Выполните эти команды внутри него:
+
+```shell
+git clone --recurse-submodules https://github.com/qmk/qmk_firmware.git
+cd qmk_firmware
+```
+
+?> Если вы уже знаете, [как пользоваться GitHub](ru-ru/getting_started_github.md), мы рекомендуем вам вместо этого создать и клонировать свой собственный форк. Если вы не понимаете, что это значит, просто проигнорируйте это сообщение.
+
+QMK включает в себя скрипт, который поможет вам установить все оставшееся, что вам понадобится. Вы должны запустить его, набрав эту команду:
+
+    util/qmk_install.sh
+
+## Протестируйте ваше окружение для сборки
+
+Теперь, когда ваше окружение QMK для сборки настроено, вы можете собрать прошивку для вашей клавиатуры. Начните с попытки собрать раскладку для клавиатуры по умолчанию. У вас должно это получиться с помощью команды в этом формате:
+
+    make <keyboard>:default
+
+Например, чтобы собрать прошивку для Clueboard 66%, вы введете:
+
+    make clueboard/66/rev3:default
+
+Когда все закончится, вы должны увидеть большой лог, который заканчивается примерно так:
+
+```
+Linking: .build/clueboard_66_rev3_default.elf                                                       [OK]
+Creating load file for flashing: .build/clueboard_66_rev3_default.hex                               [OK]
+Copying clueboard_66_rev3_default.hex to qmk_firmware folder                                        [OK]
+Checking file size of clueboard_66_rev3_default.hex                                                 [OK]
+ * The firmware size is fine - 26356/28672 (2316 bytes free)
+```
+
+# Создаем вашу раскладку
+
+Теперь вы готовы создать свою персональную раскладку! Для этого перейдите к [Собираем вашу первую прошивку](ru-ru/newbs_building_firmware.md).

docs/ws2812_driver.md

@@ -0,0 +1,33 @@
+# WS2812 Driver
+This driver powers the [RGB Lighting](feature_rgblight.md) and [RGB Matrix](feature_rgb_matrix.md) features.
+
+Currently QMK supports the following addressable LEDs on AVR microcontrollers (however, the white LED in RGBW variants is not supported):
+
+    WS2811, WS2812, WS2812B, WS2812C, etc.
+    SK6812, SK6812MINI, SK6805
+
+These LEDs are called "addressable" because instead of using a wire per color, each LED contains a small microchip that understands a special protocol sent over a single wire. The chip passes on the remaining data to the next LED, allowing them to be chained together. In this way, you can easily control the color of the individual LEDs.
+
+## Driver configuration
+
+### Bitbang
+Default driver, the absence of configuration assumes this driver. To configure it, add this to your rules.mk:
+
+```make
+WS2812_DRIVER = bitbang
+```
+
+!> ARM does not yet support WS2182. Progress is being made, but we are not quite there, yet.
+
+### I2C
+Targeting boards where WS2812 support is offloaded to a 2nd MCU. Currently the driver is limited to AVR given the known consumers are ps2avrGB/BMC. To configure it, add this to your rules.mk:
+
+```make
+WS2812_DRIVER = i2c
+```
+
+Configure the hardware via your config.h:
+```c
+#define WS2812_ADDRESS 0xb0 // default: 0xb0
+#define WS2812_TIMEOUT 100 // default: 100
+```

drivers/arm/ws2812.c

@@ -0,0 +1 @@
+#error("NOT SUPPORTED")

drivers/arm/ws2812_pwm.c

@@ -0,0 +1 @@
+#error("NOT SUPPORTED")

drivers/arm/ws2812_spi.c

@@ -0,0 +1 @@
+#error("NOT SUPPORTED")

drivers/avr/ws2812.c

@@ -25,13 +25,17 @@
 #include <avr/interrupt.h>
 #include <avr/io.h>
 #include <util/delay.h>
-#include "debug.h"
 
-#if !defined(LED_ARRAY) && defined(RGB_MATRIX_ENABLE)
-// LED color buffer
-LED_TYPE led[DRIVER_LED_TOTAL];
-#    define LED_ARRAY led
-#endif
+/*
+ * Forward declare internal functions
+ *
+ * The functions take a byte-array and send to the data output as WS2812 bitstream.
+ * The length is the number of bytes to send - three per LED.
+ */
+
+void ws2812_sendarray(uint8_t *array, uint16_t length);
+void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
+
 
 #ifdef RGBW_BB_TWI
 
@@ -135,23 +139,6 @@ unsigned char I2C_Write(unsigned char c) {
 
 #endif
 
-#ifdef RGB_MATRIX_ENABLE
-// Set an led in the buffer to a color
-void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b) {
-    led[i].r = r;
-    led[i].g = g;
-    led[i].b = b;
-}
-
-void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b) {
-    for (int i = 0; i < sizeof(led) / sizeof(led[0]); i++) {
-        led[i].r = r;
-        led[i].g = g;
-        led[i].b = b;
-    }
-}
-#endif
-
 // Setleds for standard RGB
 void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
     // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));

drivers/avr/ws2812.h

@@ -20,13 +20,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef LIGHT_WS2812_H_
-#define LIGHT_WS2812_H_
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-//#include "ws2812_config.h"
-//#include "i2cmaster.h"
+#pragma once
 
 #include "quantum/color.h"
 
@@ -42,33 +36,6 @@
  *         - Send out the LED data
  *         - Wait 50<35>s to reset the LEDs
  */
-#ifdef RGB_MATRIX_ENABLE
-void ws2812_setled(int index, uint8_t r, uint8_t g, uint8_t b);
-void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b);
-#endif
-
 void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
 void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask);
 void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
-
-/*
- * Old interface / Internal functions
- *
- * The functions take a byte-array and send to the data output as WS2812 bitstream.
- * The length is the number of bytes to send - three per LED.
- */
-
-void ws2812_sendarray(uint8_t *array, uint16_t length);
-void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
-
-/*
- * Internal defines
- */
-#ifndef CONCAT
-#    define CONCAT(a, b) a##b
-#endif
-#ifndef CONCAT_EXP
-#    define CONCAT_EXP(a, b) CONCAT(a, b)
-#endif
-
-#endif /* LIGHT_WS2812_H_ */

drivers/avr/ws2812_i2c.c

@@ -0,0 +1,31 @@
+#include "ws2812.h"
+#include "i2c_master.h"
+
+#ifndef WS2812_ADDRESS
+#    define WS2812_ADDRESS 0xb0
+#endif
+
+#ifndef WS2812_TIMEOUT
+#    define WS2812_TIMEOUT 100
+#endif
+
+void ws2812_init(void) { i2c_init(); }
+
+// Setleds for standard RGB
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
+    static bool s_init = false;
+    if (!s_init) {
+        ws2812_init();
+        s_init = true;
+    }
+
+    i2c_transmit(WS2812_ADDRESS, (uint8_t *)ledarray, sizeof(LED_TYPE) * leds, WS2812_TIMEOUT);
+}
+
+// Setleds for SK6812RGBW
+void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) {
+// not supported - for now error out if its enabled
+#ifdef RGBW
+#    error "RGBW not supported"
+#endif
+}

keyboards/acheron/shark/README.md

@@ -0,0 +1,17 @@
+# Acheron Aχξρων 40-SM-O-MX-TH-WI (Codename "SharkPCB") QMK firmware
+
+<p align="center">
+  <img align="middle" src="https://raw.githubusercontent.com/Gondolindrim/acheronLibrary/master/graphics/acheronLong.png"  width="400"> 
+</p>
+
+This is the QMK firmware repository for the Shark, updated until [revision Alpha](https://github.com/Gondolindrim/SharkPCB/releases/tag/Alpha).
+
+The SharkPCB is an Open-Hardware guidelines compliant PCB which files can be found at [this link](https://github.com/Gondolindrim/SharkPCB). Its designer and maintainer is [Gondolindrim](https://github.com/Gondolindrim).
+
+See the [AcheronDocs](https://gondolindrim.github.io/AcheronDocs/shark/intro.html) page for the SharkPCB full documentation.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make acheron/shark:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/acheron/shark/config.h

@@ -0,0 +1,261 @@
+/*
+Copyright 2019 Alvaro Volpato and Steve
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xAC11
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AcheronProject
+#define PRODUCT         SharkPCB
+#define DESCRIPTION     Ortho 40 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS {B4, A15, B10, B2}
+#define MATRIX_COL_PINS {B1, B12, A1, A7, A5, A4, A3, A2, A0, C15, C14, C13}
+//{C13, C14, C15, A0,A2,A3,A4,A5,A6, A1,B12,B1}
+/* Unused pins, in the default layout, are:
+EncA (B6) because it is not used in the default PCB
+All Extra pins (A8, B15, B14, B13, B3, B5, B8, B9) , for the same reason;
+B0, which is unconnected on the PCB
+*/
+//#define UNUSED_PINS { B0, B6, B13, B14, B15, B8, B9, B5, B3 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B0
+#define BACKLIGHT_PWM_DRIVER PWMD3
+#define BACKLIGHT_PWM_CHANNEL 3
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/acheron/shark/info.json

@@ -0,0 +1,63 @@
+{
+  "keyboard_name": "SharkPCB",
+  "keyboard_folder": "acheron/shark",
+  "url": "https://gondolindrim.github.io/AcheronDocs/shark/intro.html",
+  "maintainer": "Gondolindrim",
+  "width": 12,
+  "height": 4,
+  "layouts": {
+    "LAYOUT_ortho_4x12": {
+      "key_count": 48,
+      "layout": [
+        { "x": 0, "y": 0 },
+        { "x": 1, "y": 0 },
+        { "x": 2, "y": 0 },
+        { "x": 3, "y": 0 },
+        { "x": 4, "y": 0 },
+        { "x": 5, "y": 0 },
+        { "x": 6, "y": 0 },
+        { "x": 7, "y": 0 },
+        { "x": 8, "y": 0 },
+        { "x": 9, "y": 0 },
+        { "x": 10, "y": 0 },
+        { "x": 11, "y": 0 },
+        { "x": 0, "y": 1 },
+        { "x": 1, "y": 1 },
+        { "x": 2, "y": 1 },
+        { "x": 3, "y": 1 },
+        { "x": 4, "y": 1 },
+        { "x": 5, "y": 1 },
+        { "x": 6, "y": 1 },
+        { "x": 7, "y": 1 },
+        { "x": 8, "y": 1 },
+        { "x": 9, "y": 1 },
+        { "x": 10, "y": 1 },
+        { "x": 11, "y": 1 },
+        { "x": 0, "y": 2 },
+        { "x": 1, "y": 2 },
+        { "x": 2, "y": 2 },
+        { "x": 3, "y": 2 },
+        { "x": 4, "y": 2 },
+        { "x": 5, "y": 2 },
+        { "x": 6, "y": 2 },
+        { "x": 7, "y": 2 },
+        { "x": 8, "y": 2 },
+        { "x": 9, "y": 2 },
+        { "x": 10, "y": 2 },
+        { "x": 11, "y": 2 },
+        { "x": 0, "y": 3 },
+        { "x": 1, "y": 3 },
+        { "x": 2, "y": 3 },
+        { "x": 3, "y": 3 },
+        { "x": 4, "y": 3 },
+        { "x": 5, "y": 3 },
+        { "x": 6, "y": 3 },
+        { "x": 7, "y": 3 },
+        { "x": 8, "y": 3 },
+        { "x": 9, "y": 3 },
+        { "x": 10, "y": 3 },
+        { "x": 11, "y": 3 }
+      ]
+    }
+  }
+}

keyboards/acheron/shark/keymaps/default/keymap.c

@@ -0,0 +1,105 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layers {
+  _QWERTY = 0,
+  _LOWER,
+  _RAISE,
+  _ADJUST,
+};
+
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+#define ADJUST MO(_ADJUST)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |  C   |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Alt  | GUI  |      |Lower | Space| Space|Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_ortho_4x12( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  KC_LCTL, KC_LALT, KC_LGUI, _______, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_ortho_4x12( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  BL_TOGG, BL_INC , BL_DEC , _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_ortho_4x12( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  LAYOUT_ortho_4x12( \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
+  _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______,\
+  _______, BL_TOGG, BL_INC,  BL_DEC , _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}

keyboards/acheron/shark/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = STM32F303
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support 
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
+
+LAYOUTS = ortho_4x12

keyboards/acheron/shark/shark.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 Álvaro "Gondolindrim" Volpato
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "shark.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/acheron/shark/shark.h

@@ -0,0 +1,39 @@
+/* Copyright 2019 Álvaro "Gondolindrim" Volpato
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_4x12( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B }  \
+}

keyboards/atreus/astar_mirrored/astar_mirrored.c

@@ -0,0 +1,16 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "astar_mirrored.h"

keyboards/atreus/astar_mirrored/astar_mirrored.h

@@ -0,0 +1,17 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once

keyboards/atreus/astar_mirrored/config.h

@@ -0,0 +1,38 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define PDBDOWN 1
+
+#define MATRIX_ROW_PINS { D0, D1, D3, D2 }
+#define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW

keyboards/atreus/astar_mirrored/rules.mk

@@ -0,0 +1,12 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina

keyboards/atreus/atreus.h

@@ -20,6 +20,8 @@
 
 #ifdef KEYBOARD_atreus_astar
     #include "astar.h"
+#elif KEYBOARD_atreus_astar_mirrored
+    #include "astar_mirrored.h"
 #elif KEYBOARD_atreus_teensy2
     #include "teensy2.h"
 #endif

keyboards/atreus/keymaps/xyverz/keymap.c

@@ -3,8 +3,6 @@
 // Preonic keyboards by Jack Humbert.
 
 #include QMK_KEYBOARD_H
-#include "action_layer.h"
-#include "eeconfig.h"
 
 extern keymap_config_t keymap_config;
 
@@ -12,13 +10,16 @@ extern keymap_config_t keymap_config;
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
-#define _DVORAK 0
-#define _QWERTY 1
-#define _COLEMAK 2
-#define _DVORMAC 3
-#define _LOWER 4
-#define _RAISE 5
-#define _ADJUST 16
+
+enum layer_names {
+  _DVORAK,
+  _QWERTY,
+  _COLEMAK,
+  _DVORMAC,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
 
 enum planck_keycodes {
   DVORAK = SAFE_RANGE,
@@ -27,7 +28,7 @@ enum planck_keycodes {
   DVORMAC,
   LOWER,
   RAISE,
-  BACKLIT
+  ADJUST
 };
 
 // Adding macros to make the keymaps below much easier to read.
@@ -37,6 +38,9 @@ enum planck_keycodes {
 #define ALTENT ALT_T(KC_ENT)
 #define ESCTRL CTL_T(KC_ESC)
 #define TABALT ALT_T(KC_TAB)
+#define ADJUST MO(_ADJUST)
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Dvorak Layer
@@ -159,57 +163,31 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 };
 
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
 }
-
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        persistent_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
     case DVORAK:
       if (record->event.pressed) {
-        persistent_default_layer_set(1UL<<_DVORAK);
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
       }
       return false;
-      break;
     case DVORMAC:
       if (record->event.pressed) {
-        persistent_default_layer_set(1UL<<_DVORMAC);
+        set_single_persistent_default_layer(_DVORMAC);
       }
       return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
   }
   return true;
-};
+}

keyboards/atreus/keymaps/xyverz/readme.md

@@ -9,7 +9,7 @@ to a final go with this.
 
 I'm using MOD_TAP quite a bit in this keymap. On all layers, R4 pinky keys use mod-tap and are SHIFT when held
 and their normal keys when tapped. In addition, ESC and TAB are also set as Ctrl and ALT respectively when held,
-and Enter/ALT on the right thumb key for all layers.
+and Enter/ALT on the right thumb key for all alpha layers.
 
 I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts.
 
@@ -44,7 +44,7 @@ Control.
 	|  Esc |  Tab |  GUI | LOWER| BkSp |------'`------|  Spc | RAISE|   -  |   '  |   \  |
 	`----------------------------------'              `----------------------------------'
 	 
-### Keymap 2: Colemak layer
+### Layer 2: Colemak layer
 
 	,----------------------------------.              ,----------------------------------.
 	|   Q  |   W  |   F  |   P  |   G  |              |   J  |   L  |   U  |   Y  |   L  |
@@ -56,7 +56,7 @@ Control.
 	|  Esc |  Tab |  GUI | LOWER| BkSp |------'`------|  Spc | RAISE|   -  |   '  |   \  |
 	`----------------------------------'              `----------------------------------'
 
-### Keymap 3: Dvorak for Mac layout
+### Layer 3: Dvorak for Mac layer
 
 	,----------------------------------.              ,----------------------------------.
 	|   '  |   ,  |   .  |   P  |   Y  |              |   F  |   G  |   C  |   R  |   L  |
@@ -68,7 +68,7 @@ Control.
 	|  Esc |  Tab |  GUI | LOWER| BkSp |------'`------|  Spc | RAISE|   -  |   /  |   \  |
 	`----------------------------------'              `----------------------------------'
 
-### Keymap 4: LOWER layer
+### Layer 4: LOWER layer
 
 	,----------------------------------.              ,----------------------------------.
 	|   !  |   @  |   #  |   $  |   %  |              |   ^  |   &  |   *  |   (  |   )  |
@@ -81,7 +81,7 @@ Control.
 	`----------------------------------'              `----------------------------------'
 
 
-### Keymap 5: RAISE layer
+### Layer 5: RAISE layer
 
 	,----------------------------------.              ,----------------------------------.
 	|   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  |
@@ -93,7 +93,7 @@ Control.
 	|   `  |      |      |      | Del  |------'`------| Ins  |      |      |      |      |
 	`----------------------------------'              `----------------------------------'
 
-### Keymap 6: ADJUST layer
+### Layer 6: ADJUST layer
 
 	,----------------------------------.              ,----------------------------------.
 	|  F1  |  F2  |  F3  |  F4  |  F5  |              |  F6  |  F7  |  F8  |  F9  | F10  |

keyboards/atreus62/keymaps/xyverz/keymap.c

@@ -14,19 +14,21 @@
 CHANGELOG:
 
  0.1 - Initial commit. Based off of Profet's default keymap.
- 0.2 - Converted to a more Planck/Preonic keymap style file with 
+ 0.2 - Converted to a more Planck/Preonic keymap style file with
        persistent layers enabled. Renamed layers to reflect OLKB maps.
        Added a TODO list.
- 0.3 - Moved location of media & volume keys. Added Print Screen, 
+ 0.3 - Moved location of media & volume keys. Added Print Screen,
        Scroll Lock and Pause keys. Added a WOW gaming layer that
        changes the location of Ctrl & Alt to the thumb keys. Added
        readme.
- 0.4 - After more useage, I realized that the ESC key was in the way 
+ 0.4 - After more useage, I realized that the ESC key was in the way
        of my muscle memory (gee, thanks, Planck!) so I moved it to
        the normal Caps Lock position, and moved Caps Lock to the same
        position on the RAISE and LOWER layers. Added code to turn off
        the Pro Micro LEDs after flashing.
  0.5 - Converted keymap to LAYOUT standard.
+ 0.6 - Swapped ESC and GRV in all layers.
+ 0.7 - Brought code up to current standards.
 
 TODO:
 
@@ -39,66 +41,59 @@ TODO:
 // this is the style you want to emulate.
 // This is the canonical layout file for the Quantum project. If you want to add another keyboard,
 #include QMK_KEYBOARD_H
-#include "action_layer.h"
-#include "eeconfig.h"
 
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _DVORAK 0
-#define _QWERTY 1
-#define _COLEMAK 2
-#define _WOW 3
-#define _LOWER 4
-#define _RAISE 5
-#define _ADJUST 16
+enum layer_names { _DVORAK, _QWERTY, _COLEMAK, _WOW, _DESTINY, _LOWER, _RAISE, _ADJUST };
 
-enum atreus52_keycodes {
-  DVORAK = SAFE_RANGE,
-  QWERTY,
-  COLEMAK,
-  WOW,
-  LOWER,
-  RAISE
-};
+enum atreus52_keycodes { DVORAK = SAFE_RANGE, QWERTY, COLEMAK, WOW, DESTINY, LOWER, RAISE, ADJUST };
 
 // Aliases to make the keymap clearer.
 #define CTL_ENT CTL_T(KC_ENT)
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define ADJUST MO(_ADJUST)
 
+// clang-format off
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_DVORAK] = LAYOUT ( /* dvorak */
-    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
     KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                      KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH,
-    KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                      KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
+    KC_GRV,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                      KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
     KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,                      KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
     KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_LGUI, KC_ENT,  KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_RCTL
   ),
 
   [_QWERTY] = LAYOUT ( /* qwerty */
-    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
-    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_GRV,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
     KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_LGUI, KC_ENT,  KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_RCTL
   ),
 
   [_COLEMAK] = LAYOUT ( /* colemak */
-    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
     KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                      KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,
-    KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,                      KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    KC_GRV,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,                      KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
     KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_LGUI, KC_ENT,  KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_RCTL
   ),
 
   [_WOW] = LAYOUT ( /* Dvorak with minor modifications for playing World of Warcraft */
-    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
     KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                      KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH,
-    KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                      KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
+    KC_GRV,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                      KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
     KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,                      KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
     KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_LALT, CTL_ENT, KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT
   ),
 
+  [_DESTINY] = LAYOUT ( /* Dvorak with minor modifications for playing Destiny 2 and other FPS Looters */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                      KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH,
+    KC_GRV,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                      KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,                      KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+    KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER,   KC_BSPC, KC_DEL,  KC_ENT,  KC_SPC,  RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_ENT
+  ),
+
   [_LOWER] = LAYOUT (
     KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,
     KC_TILD, KC_GRV,  _______, _______, _______, _______,                   _______, _______, _______, _______, _______, KC_PIPE,
@@ -114,76 +109,48 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, KC_HOME, KC_END,  _______, KC_DEL,  _______, _______, KC_INS,  _______, KC_PGUP, KC_PGDN, _______, _______
   ),
   [_ADJUST] = LAYOUT (
-    _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, KC_F13,  KC_F14,  KC_F15,                    _______, _______, _______, _______, _______, _______,
     _______, RESET,   _______, _______, _______, _______,                   _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______,                   _______, QWERTY,  COLEMAK, DVORAK,  _______, WOW,
+    _______, _______, _______, _______, _______, _______,                   _______, QWERTY,  COLEMAK, DVORAK,  DESTINY, WOW,
     _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
   ),
-
 };
+//clang-format on
 
 void matrix_init_user(void) {
 #ifdef BOOTLOADER_CATERINA
    // This will disable the red LEDs on the ProMicros
-   DDRD &= ~(1<<5);
-   PORTD &= ~(1<<5);
-   DDRB &= ~(1<<0);
-   PORTB &= ~(1<<0);
+   setPinInput(D5);
+   writePinLow(D5);
+   setPinInput(B0);
+   writePinLow(B0);
 #endif
 };
 
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+};
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-        case QWERTY:
-          if (record->event.pressed) {
-            persistent_default_layer_set(1UL<<_QWERTY);
-          }
-          return false;
-          break;
-        case COLEMAK:
-          if (record->event.pressed) {
-            persistent_default_layer_set(1UL<<_COLEMAK);
-          }
-          return false;
-          break;
-        case DVORAK:
-          if (record->event.pressed) {
-            persistent_default_layer_set(1UL<<_DVORAK);
-          }
-          return false;
-          break;
-        case WOW:
-          if (record->event.pressed) {
-            persistent_default_layer_set(1UL<<_WOW);
-          }
-          return false;
-          break;
-        case LOWER:
-          if (record->event.pressed) {
-            layer_on(_LOWER);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          } else {
-            layer_off(_LOWER);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          }
-          return false;
-          break;
-        case RAISE:
-          if (record->event.pressed) {
-            layer_on(_RAISE);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          } else {
-            layer_off(_RAISE);
-            update_tri_layer(_LOWER, _RAISE, _ADJUST);
-          }
-          return false;
-          break;
-      }
-    return true;
+  if (record->event.pressed) {
+   switch (keycode) {
+    case DVORAK:
+        set_single_persistent_default_layer(_DVORAK);
+      return false;
+    case QWERTY:
+        set_single_persistent_default_layer(_QWERTY);
+      return false;
+    case COLEMAK:
+        set_single_persistent_default_layer(_COLEMAK);
+      return false;
+    case WOW:
+        set_single_persistent_default_layer(_WOW);
+      return false;
+    case DESTINY:
+        set_single_persistent_default_layer(_DESTINY);
+      return false;
+   }
+  }
+  return true;
 };

keyboards/atreus62/keymaps/xyverz/readme.md

@@ -23,6 +23,13 @@ The bottom row is fairly Kinesis-ish since the Contour and Advantage keyboards h
  * Moved location of Escape key to Caps Lock position. Moved Caps Lock to same position on Raise/Lower Layers.
  * Put Tilde/Grave in the upper-left corner
  * Added code to turn off the red LEDs on the Pro Micro after flashing. They were annoying me.
+### 0.5
+ * Converted keymap to LAYOUT standard.
+### 0.6
+ * Swapped ESC and GRV in all layers.
+### 0.7
+ * Brought code up to new standards (as of 27 June 2019).
+ * Updated this readme file.
 
 ### TODO:
 
@@ -34,11 +41,11 @@ The bottom row is fairly Kinesis-ish since the Contour and Advantage keyboards h
 ### Layer 0: Dvorak layer
 
 	,-----------------------------------------.              ,-----------------------------------------.
-	| Grv  |   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  |   \  |
+	| Esc  |   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  |   \  |
 	|------+------+------+------+------+------|              |------+------+------+------+------+------|
 	| Tab  |   '  |   ,  |   .  |   P  |   Y  |              |   F  |   G  |   C  |   R  |   L  |   /  |
 	|------+------+------+------+------+------|              |------+------+------+------+------+------|
-	| Esc  |   A  |   O  |   E  |   U  |   I  |              |   D  |   H  |   T  |   N  |   S  |   -  |
+	| Grv  |   A  |   O  |   E  |   U  |   I  |              |   D  |   H  |   T  |   N  |   S  |   -  |
 	|------+------+------+------+------+------|------.,------|------+------+------+------+------+------|
 	| Shft |   ;  |   Q  |   J  |   K  |   X  | Gui  ||Enter |   B  |   M  |   W  |   V  |   Z  | Shft |
 	|------+------+------+------+------+------|      ||      |------+------+------+------+------+------|
@@ -48,11 +55,11 @@ The bottom row is fairly Kinesis-ish since the Contour and Advantage keyboards h
 ### Layer 1: QWERTY layer
 
 	,-----------------------------------------.              ,-----------------------------------------.
-	| Grv  |   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  |   -  |
+	| Esc  |   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  |   -  |
 	|------+------+------+------+------+------|              |------+------+------+------+------+------|
 	| Tab  |   Q  |   W  |   E  |   R  |   T  |              |   Y  |   U  |   I  |   O  |   P  | Del  |
 	|------+------+------+------+------+------|              |------+------+------+------+------+------|
-	| Esc  |   A  |   S  |   D  |   F  |   G  |              |   D  |   H  |   T  |   N  |   S  |   '  |
+	| Grv  |   A  |   S  |   D  |   F  |   G  |              |   D  |   H  |   T  |   N  |   S  |   '  |
 	|------+------+------+------+------+------|------.,------|------+------+------+------+------+------|
 	| Shft |   Z  |   X  |   C  |   V  |   B  | Gui  ||Enter |   N  |   M  |   ,  |   .  |   /  | Shft |
 	|------+------+------+------+------+------|      ||      |------+------+------+------+------+------|
@@ -62,11 +69,11 @@ The bottom row is fairly Kinesis-ish since the Contour and Advantage keyboards h
 ### Keymap 2: Colemak layer
 
 	,-----------------------------------------.              ,-----------------------------------------.
-	| Grv  |   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  |   -  |
+	| Esc  |   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  |   -  |
 	|------+------+------+------+------+------|              |------+------+------+------+------+------|
 	| Tab  |   Q  |   W  |   F  |   P  |   G  |              |   J  |   U  |   U  |   Y  |   ;  | Del  |
 	|------+------+------+------+------+------|              |------+------+------+------+------+------|
-	| Esc  |   A  |   R  |   S  |   T  |   D  |              |   H  |   N  |   E  |   I  |   O  |   '  |
+	| Grv  |   A  |   R  |   S  |   T  |   D  |              |   H  |   N  |   E  |   I  |   O  |   '  |
 	|------+------+------+------+------+------|------.,------|------+------+------+------+------+------|
 	| Shft |   Z  |   X  |   C  |   V  |   B  | Gui  ||Enter |   K  |   M  |   ,  |   .  |   /  | Shft |
 	|------+------+------+------+------+------|      ||      |------+------+------+------+------+------|
@@ -80,14 +87,28 @@ The bottom row is fairly Kinesis-ish since the Contour and Advantage keyboards h
 	|------+------+------+------+------+------|              |------+------+------+------+------+------|
 	| Tab  |   '  |   ,  |   .  |   P  |   Y  |              |   F  |   G  |   C  |   R  |   L  |   /  |
 	|------+------+------+------+------+------|              |------+------+------+------+------+------|
-	| Caps |   A  |   O  |   E  |   U  |   I  |              |   D  |   H  |   T  |   N  |   S  |   -  |
+	| Grv  |   A  |   O  |   E  |   U  |   I  |              |   D  |   H  |   T  |   N  |   S  |   -  |
 	|------+------+------+------+------+------|------.,------|------+------+------+------+------+------|
 	| Shft |   ;  |   Q  |   J  |   K  |   X  | Alt  ||Ctrl/ |   B  |   M  |   W  |   V  |   Z  | Shft |
 	|------+------+------+------+------+------|      ||Enter |------+------+------+------+------+------|
 	| Ctrl |  Alt | Left | Rght | LOWER| BkSp |------'`------|  Spc | RAISE|  Up  | Down |  Gui | Ctrl |
 	`-----------------------------------------'              `-----------------------------------------'
 
-### Keymap 4: LOWER layer
+### Layer 4: Destiny layer
+
+	,-----------------------------------------.              ,-----------------------------------------.
+	| Esc  |   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  |   \  |
+	|------+------+------+------+------+------|              |------+------+------+------+------+------|
+	| Tab  |   '  |   ,  |   .  |   P  |   Y  |              |   F  |   G  |   C  |   R  |   L  |   /  |
+	|------+------+------+------+------+------|              |------+------+------+------+------+------|
+	| Grv  |   A  |   O  |   E  |   U  |   I  |              |   D  |   H  |   T  |   N  |   S  |   -  |
+	|------+------+------+------+------+------|------.,------|------+------+------+------+------+------|
+	| Shft |   ;  |   Q  |   J  |   K  |   X  | Del  ||Enter |   B  |   M  |   W  |   V  |   Z  | Shft |
+	|------+------+------+------+------+------|      ||      |------+------+------+------+------+------|
+	| Ctrl |  Alt | Left | Rght | LOWER| BkSp |------'`------|  Spc | RAISE|  Up  | Down |  Gui | Ctrl |
+	`-----------------------------------------'              `-----------------------------------------'
+
+### Keymap 5: LOWER layer
 
 	,-----------------------------------------.              ,-----------------------------------------.
 	| F11  |  F1  |  F2  |  F3  |  F4  |  F5  |              |  F6  |  F7  |  F8  |  F9  | F10  | F12  |
@@ -102,7 +123,7 @@ The bottom row is fairly Kinesis-ish since the Contour and Advantage keyboards h
 	`-----------------------------------------'              `-----------------------------------------'
 
 
-### Keymap 5: RAISE layer
+### Keymap 6: RAISE layer
 
 	,-----------------------------------------.              ,-----------------------------------------.
 	| F11  |  F1  |  F2  |  F3  |  F4  |  F5  |              |  F6  |  F7  |  F8  |  F9  | F10  | F12  |
@@ -116,7 +137,7 @@ The bottom row is fairly Kinesis-ish since the Contour and Advantage keyboards h
 	|      |      | Home | End  |      | Del  |------'`------|  Ins |      | PgUp | PgDn |      |      |
 	`-----------------------------------------'              `-----------------------------------------'
 
-### Keymap 6: ADJUST layer
+### Keymap 7: ADJUST layer
 
 	,-----------------------------------------.              ,-----------------------------------------.
 	|      |      |      |      |      |      |              |      |      |      |      |      |      |

keyboards/c39/keymaps/kuchosauronad0/config.h

@@ -28,16 +28,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT)) \
 )
 
-//#ifdef RGBLIGHT_ENABLE
-//#define RGB_DI_PIN D3
-//#define RGBLED_NUM 16     // Number of LEDs
-//#define RGBLED_SPLIT { 8, 8 }
-//
-//#define RGBLIGHT_HUE_STEP 12
-//#define RGBLIGHT_SAT_STEP 12
-//#define RGBLIGHT_VAL_STEP 12
-//#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
-//#define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
-//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1
-//#endif // RGBLIGHT_ENABLE
+#ifdef RGBLIGHT_ENABLE
+#  define RGB_DI_PIN D0
+#  define RGBLED_NUM 4
+#endif // !RGBLIGHT_ENABLE
+
+/*
+#ifdef AUDIO_ENABLE
+#  Timer 1: #define B5_AUDIO #define B6_AUDIO #define B7_AUDIO
+#  Timer 3: #define C4_AUDIO #define C5_AUDIO #define C6_AUDIO
+//TODO: only D0 and D1 available
+#endif // !AUDIO_ENABLE
+*/
 

keyboards/c39/keymaps/kuchosauronad0/keymap.c

@@ -22,14 +22,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_H
 #include "kuchosauronad0.h"
 
-#ifdef INDICATOR_LIGHTS
-extern userspace_config_t userspace_config;
-
-uint8_t last_mod;
-uint8_t last_led;
-uint8_t last_osm;
+#ifdef RGBLIGHT_ENABLE
+  extern rgblight_config_t rgblight_config;
 #endif
 
+#ifdef INDICATOR_LIGHTS
+  extern userspace_config_t userspace_config;
+  uint8_t last_mod;
+  uint8_t last_led;
+  uint8_t last_osm;
+#endif
+
+
 #define LAYOUT_collide39_base( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
     K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
@@ -40,7 +44,16 @@ uint8_t last_osm;
     SFT_T(KC_ESC),        K11,    K12,     K13,      K14,     K15,     LT(LOWER,KC_PGDN),  K16,     K17,     K18,     K19,     K1A,     SFT_T(KC_ENT), \
     MT(MOD_LCTL,KC_DEL),  K21,    K22,     K23,      K24,     K25,     KC_SPACE,           K26,     K27,     K28,     K29,     K2A,     KC_LEAD  \
   )
-#define LAYOUT_collide39_base_wrapper(...)       LAYOUT_collide39_base(__VA_ARGS__)
+
+/* 
+ * ,------. ,----------------------------------------------------------------------------. ,------.
+ * |ALTTAB| |   Q  |   W  |   E  |   R  |   T  |RSE/PU|   Y  |   U  |   I  |   O  |   P  | | BSPC |
+ * |------| |------+------+------+------+------+------+------+------+------+------+------+ |------|
+ * |SF/ESC| |   A  |   S  |   D  |   F  |   G  |LWR/PD|   H  |   J  |   K  |   L  |   ;  | | ENTER|
+ * |------| |------+------+------+------+------+------+------+------+------+------+------+ |------|
+ * |CTLDEL| |   Z  |   X  |   C  |   V  |   B  |SPACE |   N  |   M  |   ,  |   .  |   /  | |LEADER|
+ * `------' `----------------------------------------------------------------------------' `------'
+ */
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
             
@@ -70,39 +83,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 #endif
   [_WORKMAN] = LAYOUT_collide39_base_wrapper(
-    _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
-    _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
-    _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
+    _________________RGB_UP____________________, _________________RGB_UP____________________,
+    _________________RGB_CENTER________________, _________________RGB_CENTER________________,
+    _________________RGB_DOWN__________________, _________________RGB_DOWN__________________
   ),
 
-  [_NORMAN] = LAYOUT_collide39_base_wrapper(
-    _________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
-    _________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
-    _________________NORMAN_L3_________________, _________________NORMAN_R3_________________
+  [_PLOVER] = LAYOUT_wrapper(\
+    KC_1,  _________________PLOVER_L1_________________, _______, _________________PLOVER_R1_________________, KC_1,
+    KC_NO, _________________PLOVER_L2_________________, _______, _________________PLOVER_R2_________________, KC_NO,
+    KC_NO, _________________PLOVER_L3_________________, _______, _________________PLOVER_R3_________________, _______
   ),
 
-  [_MALTRON] = LAYOUT_collide39_base_wrapper(
-    _________________MALTRON_L1________________, _________________MALTRON_R1________________,
-    _________________MALTRON_L2________________, _________________MALTRON_R2________________,
-    _________________MALTRON_L3________________, _________________MALTRON_R3________________
-  ),
-
-  [_EUCALYN] = LAYOUT_collide39_base_wrapper(
-    _________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
-    _________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
-    _________________EUCALYN_L3________________, _________________EUCALYN_R3________________
-  ),
-
-  [_CARPLAX] = LAYOUT_collide39_base_wrapper(
-    _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
-    _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
-    _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
-  ),
-
-
   [_MODS] = LAYOUT_wrapper(\
-    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______,
+    KC_LALT, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, KC_RALT,
+    KC_LCTL, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, KC_RCTL,
     KC_LSFT, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______
   ),
 
@@ -121,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_ADJUST] = LAYOUT_wrapper(\
     KC_MAKE, _________________ADJUST_L1_________________, _______,  _________________ADJUST_R1_________________, KC_RESET,
     VRSN,    _________________ADJUST_L2_________________, _______,  _________________ADJUST_R2_________________, EEP_RST,
-    TG_MODS, _________________ADJUST_L3_________________, _______,  _________________ADJUST_R3_________________, KC_MPLY
+    DEBUG,   _________________ADJUST_L3_________________, _______,  _________________ADJUST_R3_________________, _______
   )
 
 };

keyboards/c39/keymaps/kuchosauronad0/readme.md

@@ -1 +1,10 @@
 # Personal keymap for the collide39
+
+## Features:
+
+- leader key
+- combos
+- tap dance
+- rgb backlight for the space key using a chameleon 4x WS28xx leds
+
+#

keyboards/c39/keymaps/kuchosauronad0/rules.mk

@@ -2,19 +2,19 @@ BOOTLOADER        = caterina
 BOOTMAGIC_ENABLE  = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE   = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE   = yes      # Audio control and System control(+450)
-CONSOLE_ENABLE    = no       # Console for debug(+400)
+CONSOLE_ENABLE    = no      # Console for debug(+400)
 COMMAND_ENABLE    = no       # Commands for debug and configuration
 LEADER_ENABLE     = yes      # default is yes
 TAP_DANCE_ENABLE  = no      #(+1254)
+COMBO_ENABLE      = yes
 UNICODE_ENABLE    = no       #(+1134)
 UNICODEMAP_ENABLE = yes
-RGBLIGHT_ENABLE   = no
+RGBLIGHT_ENABLE   = yes
 AUDIO_ENABLE      = no
 NKRO_ENABLE       = yes      
 
-INDICATOR_LIGHTS  = no
+INDICATOR_LIGHTS  = yes
 MACROS_ENABLED    = no
-RGBLIGHT_TWINKLE  = no
-RGBLIGHT_STARTUP_ANIMATION = no
+RGBLIGHT_STARTUP_ANIMATION = yes
 
-NO_SECRETS = yes
+NO_SECRETS = no

keyboards/cannonkeys/an_c/an_c.h

@@ -23,13 +23,13 @@
   K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, \
   K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2E, \
   K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3E,\
-  K40, K41,  K42,              K45,            K49,      K4B,           K4E \
+  K40, K41,  K42,              K45,                 K4A, K4B,           K4E \
 ) { \
   {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,  K0D,  K0E}, \
   {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,  KNO,  K1E   }, \
   {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  KNO,  KNO,  K2E  }, \
   {  K30,  K31,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  KNO,  KNO,  K3E  }, \
-  {  K40,  K41,  K42,  KNO,  KNO,    K45,    KNO,    KNO,    KNO,    K49,  KNO,  K4B,  KNO,  KNO,  K4E  }  \
+  {  K40,  K41,  K42,  KNO,  KNO,    K45,    KNO,    KNO,    KNO,    KNO,  K4A,  K4B,  KNO,  KNO,  K4E  }  \
 }
 
 #define LAYOUT_all( \

keyboards/cannonkeys/an_c/config.h

@@ -62,21 +62,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // EEPROM usage
 // TODO: refactor with new user EEPROM code (coming soon)
 #define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
+#define EEPROM_MAGIC_ADDR 40
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
 // and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x02
-#define EEPROM_VERSION_ADDR 34
+#define EEPROM_VERSION 0x03
+#define EEPROM_VERSION_ADDR 42
 
 
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 // Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
 // start + layer * rows * col * 2
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-#define EEPROM_CUSTOM_BACKLIGHT 636
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
+#define EEPROM_CUSTOM_BACKLIGHT 644
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 645
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
 #define DYNAMIC_KEYMAP_MACRO_COUNT 16
 
 /*

keyboards/cannonkeys/instant60/config.h

@@ -62,21 +62,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // EEPROM usage
 // TODO: refactor with new user EEPROM code (coming soon)
 #define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
+#define EEPROM_MAGIC_ADDR 40
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
 // and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x02
-#define EEPROM_VERSION_ADDR 34
+#define EEPROM_VERSION 0x03
+#define EEPROM_VERSION_ADDR 42
 
 
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 // Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
 // start + layer * rows * col * 2
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-#define EEPROM_CUSTOM_BACKLIGHT 636
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
+#define EEPROM_CUSTOM_BACKLIGHT 644
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 645
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
 #define DYNAMIC_KEYMAP_MACRO_COUNT 16
 
 /*

keyboards/cannonkeys/iron165/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -0,0 +1,109 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/cannonkeys/iron165/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -0,0 +1,922 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME                  "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                32768
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON                0U
+#define GPIOA_PIN1                  1U
+#define GPIOA_PIN2                  2U
+#define GPIOA_PIN3                  3U
+#define GPIOA_PIN4                  4U
+#define GPIOA_PIN5                  5U
+#define GPIOA_PIN6                  6U
+#define GPIOA_PIN7                  7U
+#define GPIOA_PIN8                  8U
+#define GPIOA_PIN9                  9U
+#define GPIOA_PIN10                 10U
+#define GPIOA_USB_DM                11U
+#define GPIOA_USB_DP                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_PIN15                 15U
+
+#define GPIOB_PIN0                  0U
+#define GPIOB_PIN1                  1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_PIN3                  3U
+#define GPIOB_PIN4                  4U
+#define GPIOB_PIN5                  5U
+#define GPIOB_PIN6                  6U
+#define GPIOB_PIN7                  7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_SPI2_SCK              13U
+#define GPIOB_SPI2_MISO             14U
+#define GPIOB_SPI2_MOSI             15U
+
+#define GPIOC_MEMS_CS               0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_LED_RED               6U
+#define GPIOC_LED_BLUE              7U
+#define GPIOC_LED_ORANGE            8U
+#define GPIOC_LED_GREEN             9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_OSC32_IN              14U
+#define GPIOC_OSC32_OUT             15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_OSC_IN                0U
+#define GPIOF_OSC_OUT               1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
+                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
+                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
+                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
+                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
+                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
+                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
+                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
+                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
+                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
+                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

keyboards/cannonkeys/iron165/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/cannonkeys/iron165/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg

@@ -0,0 +1,703 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- STM32F0xx board Template -->
+<board
+  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
+  <configuration_settings>
+    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
+    <output_path>..</output_path>
+    <hal_version>3.0.x</hal_version>
+  </configuration_settings>
+  <board_name>ST STM32F072B-Discovery</board_name>
+  <board_id>ST_STM32F072B_DISCOVERY</board_id>
+  <board_functions></board_functions>
+  <subtype>STM32F072xB</subtype>
+  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
+  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
+  <ports>
+    <GPIOA>
+      <pin0
+        ID="BUTTON"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID="USB_DM"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID="USB_DP"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SWDIO"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SWCLK"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullDown"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOA>
+    <GPIOB>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SPI2_SCK"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SPI2_MISO"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID="SPI2_MOSI"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+    </GPIOB>
+    <GPIOC>
+      <pin0
+        ID="MEMS_CS"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Output"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID="LED_RED"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin7
+        ID="LED_BLUE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin8
+        ID="LED_ORANGE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" ></pin8>
+      <pin9
+        ID="LED_GREEN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID="OSC32_IN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID="OSC32_OUT"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOC>
+    <GPIOD>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOD>
+    <GPIOE>
+    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    </GPIOE>
+    <GPIOF>
+      <pin0
+        ID="OSC_IN"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID="OSC_OUT"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOF>
+  </ports>
+</board>

keyboards/cannonkeys/iron165/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/iron165/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/iron165/config.h

@@ -0,0 +1,89 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5A12
+#define PRODUCT_ID      0x5165
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER SmithAndRune
+#define PRODUCT Iron165
+#define DESCRIPTION Iron165 Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A8, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
+#define MATRIX_ROW_PINS { B12, B13, B14, B15, A1 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+// EEPROM usage
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 40
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x02
+#define EEPROM_VERSION_ADDR 42
+
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
+// start + layer * rows * col * 2
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
+#define EEPROM_CUSTOM_BACKLIGHT 684
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 685
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/iron165/halconf.h

@@ -0,0 +1,354 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/cannonkeys/iron165/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Iron165",
+    "url": "https://cannonkeys.com",
+    "maintainer": "awkannan",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        }
+    }
+
+}

keyboards/cannonkeys/iron165/iron165.c

@@ -0,0 +1 @@
+#include "iron165.h"

keyboards/cannonkeys/iron165/iron165.h

@@ -0,0 +1,17 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_default( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,       \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K115, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
+	K400, K401, K402,                   K406,                   K410, K411, K412, K413,       K415  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  KC_NO }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO, K115 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO, K315 }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO,  K410,  K411,  K412,  K413,  KC_NO, K415 }  \
+}

keyboards/cannonkeys/iron165/keymaps/default/keymap.c

@@ -0,0 +1,47 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_names {
+    _BASE,
+    _FN1,
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BASE] = LAYOUT_default(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
+        KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_FN1] = LAYOUT_default(
+		KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
+    )
+};

keyboards/cannonkeys/iron165/keymaps/via/keymap.c

@@ -0,0 +1,46 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_names {
+    _BASE,
+    _FN1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BASE] = LAYOUT_default(
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
+		KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_FN1] = LAYOUT_default(
+		KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
+    )
+};

keyboards/cannonkeys/iron165/keymaps/via/rules.mk

@@ -0,0 +1,5 @@
+# rules.mk overrides to enable VIA
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+

keyboards/cannonkeys/iron165/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/iron165/readme.md

@@ -0,0 +1,12 @@
+# Smith+Rune Iron165
+
+Iron165 Keyboard
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)  
+Hardware Supported: STM32F072CBT6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/iron165:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/iron165/rules.mk

@@ -0,0 +1,55 @@
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+#   comment out to disable the options.
+#
+
+# project specific files
+VPATH += keyboards/cannonkeys/stm32f072
+SRC =	keyboard.c \
+      led.c
+
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -v 0483 -p DF11
+
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
+RGBLIGHT_ENABLE = no

keyboards/cannonkeys/savage65/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -0,0 +1,109 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/cannonkeys/savage65/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -0,0 +1,922 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME                  "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                32768
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON                0U
+#define GPIOA_PIN1                  1U
+#define GPIOA_PIN2                  2U
+#define GPIOA_PIN3                  3U
+#define GPIOA_PIN4                  4U
+#define GPIOA_PIN5                  5U
+#define GPIOA_PIN6                  6U
+#define GPIOA_PIN7                  7U
+#define GPIOA_PIN8                  8U
+#define GPIOA_PIN9                  9U
+#define GPIOA_PIN10                 10U
+#define GPIOA_USB_DM                11U
+#define GPIOA_USB_DP                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_PIN15                 15U
+
+#define GPIOB_PIN0                  0U
+#define GPIOB_PIN1                  1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_PIN3                  3U
+#define GPIOB_PIN4                  4U
+#define GPIOB_PIN5                  5U
+#define GPIOB_PIN6                  6U
+#define GPIOB_PIN7                  7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_SPI2_SCK              13U
+#define GPIOB_SPI2_MISO             14U
+#define GPIOB_SPI2_MOSI             15U
+
+#define GPIOC_MEMS_CS               0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_LED_RED               6U
+#define GPIOC_LED_BLUE              7U
+#define GPIOC_LED_ORANGE            8U
+#define GPIOC_LED_GREEN             9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_OSC32_IN              14U
+#define GPIOC_OSC32_OUT             15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_OSC_IN                0U
+#define GPIOF_OSC_OUT               1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
+                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
+                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
+                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
+                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
+                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
+                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
+                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
+                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
+                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
+                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

keyboards/cannonkeys/savage65/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/cannonkeys/savage65/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg

@@ -0,0 +1,703 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- STM32F0xx board Template -->
+<board
+  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
+  <configuration_settings>
+    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
+    <output_path>..</output_path>
+    <hal_version>3.0.x</hal_version>
+  </configuration_settings>
+  <board_name>ST STM32F072B-Discovery</board_name>
+  <board_id>ST_STM32F072B_DISCOVERY</board_id>
+  <board_functions></board_functions>
+  <subtype>STM32F072xB</subtype>
+  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
+  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
+  <ports>
+    <GPIOA>
+      <pin0
+        ID="BUTTON"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID="USB_DM"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID="USB_DP"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SWDIO"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SWCLK"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullDown"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOA>
+    <GPIOB>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SPI2_SCK"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SPI2_MISO"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID="SPI2_MOSI"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+    </GPIOB>
+    <GPIOC>
+      <pin0
+        ID="MEMS_CS"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Output"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID="LED_RED"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin7
+        ID="LED_BLUE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin8
+        ID="LED_ORANGE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" ></pin8>
+      <pin9
+        ID="LED_GREEN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID="OSC32_IN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID="OSC32_OUT"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOC>
+    <GPIOD>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOD>
+    <GPIOE>
+    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    </GPIOE>
+    <GPIOF>
+      <pin0
+        ID="OSC_IN"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID="OSC_OUT"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOF>
+  </ports>
+</board>

keyboards/cannonkeys/savage65/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/savage65/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/savage65/config.h

@@ -0,0 +1,97 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0x5A65
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER CannonKeys
+#define PRODUCT Savage65
+#define DESCRIPTION Savage65 Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
+#define MATRIX_ROW_PINS { B12, B11, B14, A8, A1 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 20
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
+
+// EEPROM usage
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 40
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x02
+#define EEPROM_VERSION_ADDR 42
+
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
+// start + layer * rows * col * 2
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
+#define EEPROM_CUSTOM_BACKLIGHT 684
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 685
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/savage65/halconf.h

@@ -0,0 +1,354 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/cannonkeys/savage65/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Savage65",
+    "url": "https://cannonkeys.com",
+    "maintainer": "awkannan",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        }
+    }
+
+}

keyboards/cannonkeys/savage65/keymaps/default/keymap.c

@@ -0,0 +1,46 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_names {
+    _BASE,
+    _FN1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BASE] = LAYOUT_default(
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
+		KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_FN1] = LAYOUT_default(
+		KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS, RGB_TOG,
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
+		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
+    )
+};

keyboards/cannonkeys/savage65/keymaps/via/keymap.c

@@ -0,0 +1,47 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_names {
+    _BASE,
+    _FN1,
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BASE] = LAYOUT_default(
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
+		KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_FN1] = LAYOUT_default(
+		KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS, RGB_TOG,
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
+		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
+    )
+};

keyboards/cannonkeys/savage65/keymaps/via/rules.mk

@@ -0,0 +1,5 @@
+# rules.mk overrides to enable VIA
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+

keyboards/cannonkeys/savage65/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/savage65/readme.md

@@ -0,0 +1,12 @@
+# CannonKeys Savage65
+
+Savage65 Keyboard
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)  
+Hardware Supported: STM32F072CBT6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/savage65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).