Disable Mousekey Command interface when Constant speed is enabled (#7017)

* Add Bakeneko 80 keyboard

* Update keyboards/bakeneko80/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/bakeneko80/config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/bakeneko80/config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>

Makefile

@@ -29,6 +29,9 @@ $(info QMK Firmware $(QMK_VERSION))
 endif
 endif
 
+# avoid 'Entering|Leaving directory' messages
+MAKEFLAGS += --no-print-directory
+
 ON_ERROR := error_occurred=1
 
 BREAK_ON_ERRORS = no

common_features.mk

@@ -70,7 +70,7 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/pointing_device.c
 endif
 
-VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c
+VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi
 EEPROM_DRIVER ?= vendor
 ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
   $(error EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
@@ -85,6 +85,11 @@ else
     COMMON_VPATH += $(DRIVER_PATH)/eeprom
     QUANTUM_LIB_SRC += i2c_master.c
     SRC += eeprom_driver.c eeprom_i2c.c
+  else ifeq ($(strip $(EEPROM_DRIVER)), spi)
+    OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_SPI
+    COMMON_VPATH += $(DRIVER_PATH)/eeprom
+    QUANTUM_LIB_SRC += spi_master.c
+    SRC += eeprom_driver.c eeprom_spi.c
   else ifeq ($(strip $(EEPROM_DRIVER)), transient)
     OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
     COMMON_VPATH += $(DRIVER_PATH)/eeprom

docs/cli.md

@@ -13,18 +13,17 @@ QMK requires Python 3.6 or greater. We try to keep the number of requirements sm
 If you have installed [Homebrew](https://brew.sh) you can tap and install QMK:
 
 ```
-brew tap qmk/qmk
-brew install qmk
+brew install qmk/qmk/qmk
 export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
 qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```
 
-### Install Using easy_install or pip :id=install-using-easy_install-or-pip
+### Install Using pip :id=install-using-easy_install-or-pip
 
-If your system is not listed above you can install QMK manually. First ensure that you have python 3.6 (or later) installed and have installed pip. Then install QMK with this command:
+If your system is not listed above you can install QMK manually. First ensure that you have Python 3.6 (or later) installed and have installed pip. Then install QMK with this command:
 
 ```
-pip3 install qmk
+python3 -m pip install qmk
 export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
 qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```

docs/config_options.md

@@ -191,7 +191,12 @@ If you define these options you will enable the associated feature, which may in
 * `#define RGBLIGHT_ANIMATIONS`
   * run RGB animations
 * `#define RGBLIGHT_LAYERS`
-  * Lets you define [lighting layers](feature_rgblight.md) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state.
+  * Lets you define [lighting layers](feature_rgblight.md?id=lighting-layers) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state.
+* `#define RGBLIGHT_MAX_LAYERS`
+  * Defaults to 8. Can be expanded up to 32 if more [lighting layers](feature_rgblight.md?id=lighting-layers) are needed.
+  * Note: Increasing the maximum will increase the firmware size and slow sync on split keyboards.
+* `#define RGBLIGHT_LAYER_BLINK` 
+  * Adds ability to [blink](feature_rgblight.md?id=lighting-layer-blink) a lighting layer for a specified number of milliseconds (e.g. to acknowledge an action).
 * `#define RGBLED_NUM 12`
   * number of LEDs
 * `#define RGBLIGHT_SPLIT`

docs/eeprom_driver.md

@@ -1,4 +1,4 @@
-# EEPROM Driver Configuration
+# EEPROM Driver Configuration :id=eeprom-driver-configuration
 
 The EEPROM driver can be swapped out depending on the needs of the keyboard, or whether extra hardware is present.
 
@@ -6,15 +6,20 @@ Driver                             | Description
 -----------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 `EEPROM_DRIVER = vendor` (default) | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. STM32L0xx and STM32L1xx will use the onboard dedicated true EEPROM. Other chips will generally act as "transient" below.
 `EEPROM_DRIVER = i2c`              | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below.
+`EEPROM_DRIVER = spi`              | Supports writing to SPI-based 25xx EEPROM chips. See the driver section below.
 `EEPROM_DRIVER = transient`        | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost.
 
-## Vendor Driver Configuration
+## Vendor Driver Configuration :id=vendor-eeprom-driver-configuration
+
+#### STM32 L0/L1 Configuration :id=stm32l0l1-eeprom-driver-configuration
 
 !> Resetting EEPROM using an STM32L0/L1 device takes up to 1 second for every 1kB of internal EEPROM used.
 
-No configurable options are available.
+`config.h` override                 | Description                                                                                                              | Default Value
+------------------------------------|--------------------------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------
+`#define STM32_ONBOARD_EEPROM_SIZE` | The size of the EEPROM to use, in bytes. Erase times can be high, so it's configurable here, if not using the default value. | Minimum required to cover base _eeconfig_ data, or `1024` if VIA is enabled.
 
-## I2C Driver Configuration
+## I2C Driver Configuration :id=i2c-eeprom-driver-configuration
 
 Currently QMK supports 24xx-series chips over I2C. As such, requires a working i2c_master driver configuration. You can override the driver configuration via your config.h:
 
@@ -41,7 +46,21 @@ MB85RC256V FRAM  | `#define EEPROM_I2C_MB85RC256V` | <https://www.adafruit.com/p
 
 ?> If you find that the EEPROM is not cooperating, ensure you've correctly shifted up your EEPROM address by 1. For example, the datasheet might state the address as `0b01010000` -- the correct value of `EXTERNAL_EEPROM_I2C_BASE_ADDRESS` needs to be `0b10100000`.
 
-## Transient Driver configuration
+## SPI Driver Configuration :id=spi-eeprom-driver-configuration
+
+Currently QMK supports 25xx-series chips over SPI. As such, requires a working spi_master driver configuration. You can override the driver configuration via your config.h:
+
+`config.h` override                            | Description                                                                          | Default Value
+-----------------------------------------------|--------------------------------------------------------------------------------------|--------------
+`#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN` | SPI Slave select pin in order to inform that the EEPROM is currently being addressed | _none_
+`#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR`    | Clock divisor used to divide the peripheral clock to derive the SPI frequency        | `64`
+`#define EXTERNAL_EEPROM_BYTE_COUNT`           | Total size of the EEPROM in bytes                                                    | 8192
+`#define EXTERNAL_EEPROM_PAGE_SIZE`            | Page size of the EEPROM in bytes, as specified in the datasheet                      | 32
+`#define EXTERNAL_EEPROM_ADDRESS_SIZE`         | The number of bytes to transmit for the memory location within the EEPROM            | 2
+
+!> There's no way to determine if there is an SPI EEPROM actually responding. Generally, this will result in reads of nothing but zero.
+
+## Transient Driver configuration :id=transient-eeprom-driver-configuration
 
 The only configurable item for the transient EEPROM driver is its size:
 

docs/faq_build.md

@@ -113,26 +113,16 @@ OPT_DEFS += -DBOOTLOADER_SIZE=2048
 ```
 
 ## `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` on MacOS
+
 This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled.
 
 The solution is to remove and reinstall all affected modules.
 
 ```
-brew rm avr-gcc
-brew rm avr-gcc@8
-brew rm dfu-programmer
-brew rm dfu-util
-brew rm gcc-arm-none-eabi
-brew rm arm-gcc-bin@8
-brew rm avrdude
-brew install avr-gcc@8
-brew install dfu-programmer
-brew install dfu-util
-brew install arm-gcc-bin@8
-brew install avrdude
+brew rm avr-gcc avr-gcc@8 dfu-programmer dfu-util gcc-arm-none-eabi arm-gcc-bin@8 avrdude qmk
+brew install qmk/qmk/qmk
 brew link --force avr-gcc@8
 brew link --force arm-gcc-bin@8
-
 ```
 
 ### `avr-gcc` and LUFA

docs/feature_hd44780.md

@@ -1,6 +1,6 @@
 # HD44780 LCD Displays
 
-This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
+This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://www.peterfleury.epizy.com/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
 
 You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes.
 
@@ -50,8 +50,8 @@ LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing
 ````
 This is best done in your keyboards `matrix_init_kb` or your keymaps `matrix_init_user`.  
 It is advised to clear the display before use.  
-To do so call `lcd_clrsrc()`.
+To do so call `lcd_clrscr()`.
 
 To now print something to your Display you first call `lcd_gotoxy(column, line)`. To go to the start of the first line you would call `lcd_gotoxy(0, 0)` and then print a string with `lcd_puts("example string")`.
 
-There are more methods available to control the display. [For in depth documentation please visit the linked page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
+There are more methods available to control the display. [For in depth documentation please visit the linked page.](http://www.peterfleury.epizy.com/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)

docs/feature_rgb_matrix.md

@@ -437,12 +437,16 @@ Where `28` is an unused index from `eeconfig.h`.
 |`rgb_matrix_sethsv_noeeprom(h, s, v)`       |Set LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
 
 ### Query Current Status :id=query-current-status
-|Function               |Description      |
-|-----------------------|-----------------|
-|`rgb_matrix_get_mode()`  |Get current mode |
-|`rgb_matrix_get_hue()`   |Get current hue  |
-|`rgb_matrix_get_sat()`   |Get current sat  |
-|`rgb_matrix_get_val()`   |Get current val  |
+|Function                         |Description                |
+|---------------------------------|---------------------------|
+|`rgb_matrix_is_enabled()`        |Gets current on/off status |
+|`rgb_matrix_get_mode()`          |Gets current mode          |
+|`rgb_matrix_get_hue()`           |Gets current hue           |
+|`rgb_matrix_get_sat()`           |Gets current sat           |
+|`rgb_matrix_get_val()`           |Gets current val           |
+|`rgb_matrix_get_hsv()`           |Gets hue, sat, and val and returns a [`HSV` structure](https://github.com/qmk/qmk_firmware/blob/7ba6456c0b2e041bb9f97dbed265c5b8b4b12192/quantum/color.h#L56-L61)|
+|`rgb_matrix_get_speed()`         |Gets current speed         |
+|`rgb_matrix_get_suspend_state()` |Gets current suspend state |
 
 ## Callbacks :id=callbacks
 

docs/feature_rgblight.md

@@ -94,6 +94,7 @@ if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a n
 |`RGBLIGHT_MODE_STATIC_GRADIENT`| 0,1,..,9        |Static gradient                        |
 |`RGBLIGHT_MODE_RGB_TEST`     | *None*            |RGB Test                               |
 |`RGBLIGHT_MODE_ALTERNATING`  | *None*            |Alternating                            |
+|`RGBLIGHT_MODE_TWINKLE`      | 0,1,2,3,4,5       |Twinkle                                |
 
 Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration.
 
@@ -103,8 +104,8 @@ Note: For versions older than 0.6.117, The mode numbers were written directly. I
 
 Use these defines to add or remove animations from the firmware. When you are running low on flash space, it can be helpful to disable animations you are not using.
 
-|Define                              |Default      |Description                                                                          |
-|------------------------------------|-------------|-------------------------------------------------------------------------------------|
+|Define                              |Default      |Description                                                              |
+|------------------------------------|-------------|-------------------------------------------------------------------------|
 |`RGBLIGHT_ANIMATIONS`               |*Not defined*|Enable all additional animation modes.                                   |
 |`RGBLIGHT_EFFECT_ALTERNATING`       |*Not defined*|Enable alternating animation mode.                                       |
 |`RGBLIGHT_EFFECT_BREATHING`         |*Not defined*|Enable breathing animation mode.                                         |
@@ -115,6 +116,7 @@ Use these defines to add or remove animations from the firmware. When you are ru
 |`RGBLIGHT_EFFECT_RGB_TEST`          |*Not defined*|Enable RGB test animation mode.                                          |
 |`RGBLIGHT_EFFECT_SNAKE`             |*Not defined*|Enable snake animation mode.                                             |
 |`RGBLIGHT_EFFECT_STATIC_GRADIENT`   |*Not defined*|Enable static gradient mode.                                             |
+|`RGBLIGHT_EFFECT_TWINKLE`           |*Not defined*|Enable twinkle animation mode.                                           |
 
 ### Effect and Animation Settings
 
@@ -131,6 +133,8 @@ The following options are used to tweak the various animations:
 |`RGBLIGHT_EFFECT_KNIGHT_OFFSET`     |`0`          |The number of LEDs to start the "Knight" animation from the start of the strip by    |
 |`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`255`        |Range adjustment for the rainbow swirl effect to get different swirls                |
 |`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
+|`RGBLIGHT_EFFECT_TWINKLE_LIFE`      |`75`         |Adjusts how quickly each LED brightens and dims when twinkling (in animation steps)  |
+|`RGBLIGHT_EFFECT_TWINKLE_PROBABILITY`|`1/127`     |Adjusts how likely each LED is to twinkle (on each animation step)                   |
 
 ### Example Usage to Reduce Memory Footprint
   1. Remove `RGBLIGHT_ANIMATIONS` from `config.h`.
@@ -168,6 +172,9 @@ const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
 // How long (in milliseconds) to wait between animation steps for each of the "Knight" animations
 const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
 
+// How long (in milliseconds) to wait between animation steps for each of the "Twinkle" animations
+const uint8_t RGBLED_TWINKLE_INTERVALS[] PROGMEM = {50, 25, 10};
+
 // These control which hues are selected for each of the "Static gradient" modes
 const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 ```
@@ -177,6 +184,10 @@ const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 By including `#define RGBLIGHT_LAYERS` in your `config.h` file you can enable lighting layers. These make
 it easy to use your underglow LEDs as status indicators to show which keyboard layer is currently active, or the state of caps lock, all without disrupting any animations. [Here's a video](https://youtu.be/uLGE1epbmdY) showing an example of what you can do.
 
+### Defining Lighting Layers :id=defining-lighting-layers
+
+By default, 8 layers are possible. This can be expanded to as many as 32 by overriding the definition of `RGBLIGHT_MAX_LAYERS` in `config.h` (e.g. `#define RGBLIGHT_MAX_LAYERS 32`). Please note, if you use a split keyboard, you will need to flash both sides of the split after changing this. Also, increasing the maximum will increase the firmware size, and will slow sync on split keyboards.
+
 To define a layer, we modify `keymap.c` to list out LED ranges and the colors we want to overlay on them using an array of `rgblight_segment_t` using the `RGBLIGHT_LAYER_SEGMENTS` macro. We can define multiple layers and enable/disable them independently:
 
 ```c
@@ -211,8 +222,12 @@ void keyboard_post_init_user(void) {
     rgblight_layers = my_rgb_layers;
 }
 ```
+Note: For split keyboards with two controllers, both sides need to be flashed when updating the contents of rgblight_layers.
 
-Finally, we enable and disable the lighting layers whenever the state of the keyboard changes:
+### Enabling and disabling lighting layers :id=enabling-lighting-layers
+
+Everything above just configured the definition of each lighting layer.
+We can now enable and disable the lighting layers whenever the state of the keyboard changes:
 
 ```c
 layer_state_t layer_state_set_user(layer_state_t state) {
@@ -228,7 +243,40 @@ bool led_update_user(led_t led_state) {
 }
 ```
 
-Note: For split keyboards with two controllers, both sides need to be flashed when updating the contents of rgblight_layers.
+### Lighting layer blink :id=lighting-layer-blink
+
+By including `#define RGBLIGHT_LAYER_BLINK` in your `config.h` file you can turn a lighting
+layer on for a specified duration. Once the specified number of milliseconds has elapsed
+the layer will be turned off. This is useful, e.g., if you want to acknowledge some
+action (e.g. toggling some setting):
+
+```c
+const rgblight_segment_t PROGMEM _yes_layer[] = RGBLIGHT_LAYER_SEGMENTS( {9, 6, HSV_GREEN} );
+const rgblight_segment_t PROGMEM _no_layer[] = RGBLIGHT_LAYER_SEGMENTS( {9, 6, HSV_RED} );
+
+const rgblight_segment_t* const PROGMEM _rgb_layers[] =
+    RGBLIGHT_LAYERS_LIST( _yes_layer, _no_layer );
+
+void keyboard_post_init_user(void) {
+    rgblight_layers = _rgb_layers;
+}
+
+// Note we user post_process_record_user because we want the state
+// after the flag has been flipped...
+void post_process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case DEBUG:
+            rgblight_blink_layer(debug_enable ? 0 : 1, 500);
+            break;
+
+        case NK_TOGG:
+        case NK_ON:
+        case NK_OFF:
+            rgblight_blink_layer(keymap_config.nkro ? 0 : 1, 500);
+            break;
+    }
+}
+```
 
 ## Functions
 
@@ -328,12 +376,14 @@ rgblight_sethsv(HSV_GREEN, 2); // led 2
 |`rgblight_set_layer_state(i, is_on)`        |Enable or disable lighting layer `i` based on value of `bool is_on` |
 
 #### query
-|Function               |Description      |
-|-----------------------|-----------------|
-|`rgblight_get_mode()`  |Get current mode |
-|`rgblight_get_hue()`   |Get current hue  |
-|`rgblight_get_sat()`   |Get current sat  |
-|`rgblight_get_val()`   |Get current val  |
+|Function               |Description                |
+|-----------------------|---------------------------|
+|`rgblight_is_enabled()`|Gets current on/off status |
+|`rgblight_get_mode()`  |Gets current mode          |
+|`rgblight_get_hue()`   |Gets current hue           |
+|`rgblight_get_sat()`   |Gets current sat           |
+|`rgblight_get_val()`   |Gets current val           |
+|`rgblight_get_speed()` |Gets current speed         |
 
 ## Colors
 

docs/feature_swap_hands.md

@@ -28,3 +28,4 @@ Note that the array indices are reversed same as the matrix and the values are o
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+|`SH_OS`    |One shot swap hands: toggles while pressed or until next key press.      |

docs/isp_flashing_guide.md

@@ -115,12 +115,18 @@ The simplest and quickest way to get things back to normal is to flash only a bo
 
 You can find the stock bootloaders in the [`util/` folder](https://github.com/qmk/qmk_firmware/tree/master/util). Be sure to flash the correct bootloader for your chip:
 
-* [`atmega32u4`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) - Most keyboards, Planck Rev 1-5, Preonic Rev 1-2
-* [`Pro Micro`](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex) - The default bootloader for Pro Micro controllers
-* [`at90usb1286`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128x_1_0_1.hex) - Planck Light Rev 1
-* [`atmega32a`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32a_1_0_0.hex) - jj40, and other V-USB/ps2avrGB keyboards
+* **Atmel DFU**
+  * [ATmega16U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega16u4_1.0.1.hex)
+  * [ATmega32U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1.0.0.hex)
+  * [AT90USB64](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb64_1.0.0.hex)
+  * [AT90USB128](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128_1.0.1.hex)
+* **Caterina**
+  * [Pro Micro (5V/16MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex)
+  * [Pro Micro (3.3V/8MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro8.hex)
+* **BootloadHID (PS2AVRGB)**
+  * [ATmega32A](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_ps2avrgb_bootloadhid_1.0.1.hex)
 
-If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU =` line will have the value you need. It may differ between different versions of the board.
+If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU` and `BOOTLOADER` lines will have the value you need. It may differ between different versions of the board.
 
 ### Production Techniques
 

docs/ja/feature_hd44780.md

@@ -55,7 +55,7 @@ LCD_DISP_ON_CURSOR_BLINK : ディスプレイオン、点滅カーソル
 ````
 これはキーボードの `matrix_init_kb` またはキーマップの `matrix_init_user` で行うのが最適です。
 使用前にディスプレイをクリアすることをお勧めします。
-そのためには、`lcd_clrsrc()` を呼びます。
+そのためには、`lcd_clrscr()` を呼びます。
 
 ディスプレイに何かを表示するには、最初に `lcd_gotoxy(column, line)` を呼びます。最初の行の先頭に移動するには、`lcd_gotoxy(0, 0)` を呼び出し、その後 `lcd_puts("example string")` を使って文字列を出力します。
 

docs/ja/feature_layouts.md

@@ -0,0 +1,114 @@
+# レイアウト: 複数のキーボードで1つのキーマップを使用
+
+<!---
+  original document: 0.8.134:docs/feature_layouts.md
+  git diff 0.8.134 HEAD -- docs/feature_layouts.md | cat
+-->
+
+`layouts/` フォルダは、様々なキーボードに適用できる色々な物理キーレイアウトを含みます。
+
+```
+layouts/
++ default/
+| + 60_ansi/
+| | + readme.md
+| | + layout.json
+| | + a_good_keymap/
+| | | + keymap.c
+| | | + readme.md
+| | | + config.h
+| | | + rules.mk
+| | + <keymap folder>/
+| | + ...
+| + <layout folder>/
++ community/
+| + <layout folder>/
+| + ...
+```
+
+`layouts/default/` と `layouts/community/` は、レイアウト「repositories」の2つの例です。現在のところ、`default` にはユーザの参考用に、レイアウトに関する全ての情報および、`default_<layout>` という名前の1つのデフォルトのキーマップが含まれています。`community` には全ての共有キーマップが含まれており、それらはユーザが `layouts/` にクローンするための別のリポジトリに分割することを最終的な目的としていますQMK は `layouts/` 内のすべてのフォルダを検索するため、ここに複数のリポジトリを持つことができます。
+
+各レイアウトフォルダは、レイアウトの物理的な側面に基づいて、可能な限り一般的な名称で(`[a-z0-9_]`)という名前が付けられ、キーボードで定義されるレイアウトと一緒に `readme.md` を含みます。
+
+```md
+# 60_ansi
+
+   LAYOUT_60_ansi
+```
+
+新しい名前は既存のレイアウトで設定された標準に準拠しようと努力する必要があり、必要に応じて PR/Issue で議論することができます。
+
+## レイアウトのサポート
+
+キーボードがレイアウトをサポートするために、変数は `<keyboard>.h` で定義し、引数/キー (できれば物理レイアウト)の数に一致している必要があります。
+
+    #define LAYOUT_60_ansi KEYMAP_ANSI
+
+レイアウトの名前は次の正規表現に一致しなければなりません: `[a-z0-9_]+`
+
+フォルダ名はキーボードの `rules.mk` に追加する必要があります:
+
+    LAYOUTS = 60_ansi
+
+`LAYOUTS` は任意のキーボードフォルダレべルの `rules.mk` に設定することができます:
+
+    LAYOUTS = 60_iso
+
+ただし、`LAYOUT_<layout>` 変数は `<folder>.h` でも定義する必要があります。
+
+## キーマップのビルド
+
+以下の形式でコマンドを使ってキーボードキーマップを作成できるはずです:
+
+    make <keyboard>:<layout>
+
+### レイアウトの競合
+キーボードが複数のレイアウトオプションをサポートし、
+
+    LAYOUTS = ortho_4x4 ortho_4x12
+
+なおかつ両方のオプションについてレイアウトが存在する場合、
+```
+layouts/
++ community/
+| + ortho_4x4/
+| | + <layout>/
+| | | + ...
+| + ortho_4x12/
+| | + <layout>/
+| | | + ...
+| + ...
+```
+
+FORCE_LAYOUT 引数はどのレイアウトをビルドするかを指定するために使うことができます
+
+    make <keyboard>:<layout> FORCE_LAYOUT=ortho_4x4
+    make <keyboard>:<layout> FORCE_LAYOUT=ortho_4x12
+
+## キーボードに依存しないレイアウトを作成するためのヒント
+
+### インクルード
+
+`#include "planck.h"` を使う代わりに、以下の行を使ってコンパイルされる `<keyboard>.h` (`<folder>.h` はここでインクルードすべきではありません)ファイルをインクルードすることができます:
+
+    #include QMK_KEYBOARD_H
+
+キーボード固有のコードを保持したい場合は、これらの変数を使って `#ifdef` 文でエスケープすることができます:
+
+* `KEYBOARD_<folder1>_<folder2>`
+
+例えば:
+
+```c
+#ifdef KEYBOARD_planck
+    #ifdef KEYBOARD_planck_rev4
+        planck_rev4_function();
+    #endif
+#endif
+```
+
+名前は小文字でキーボード/リビジョンのフォルダ/ファイル名と正確に一致することに注意してください。
+
+### キーマップ
+
+同じレイアウトで分割および非分割キーボードをサポートするためには、キーマップでキーボード非依存の `LAYOUT_<layout name>` マクロを使う必要があります。例えば、Let's Split および Planck が同じレイアウトを共有するには、`LAYOUT_planck_grid` や C 配列の場合の単なる `{}` の代わりに、`LAYOUT_ortho_4x12` を使う必要があります。

docs/ja/feature_leader_key.md

@@ -0,0 +1,151 @@
+# リーダーキー: 新しい種類のモディファイア
+
+<!---
+  original document: 0.8.134:docs/feature_leader_key.md
+  git diff 0.8.134 HEAD -- docs/feature_leader_key.md | cat
+-->
+
+もしあなたが Vim を使ったことがある場合、リーダーキーは何であるかを知っています。そうでなければ、素晴らしい概念を発見しようとしています。:) 例えば、Alt+Shift+W を押す(3つのキーを同時に押す)代わりに、キーの_シーケンス_を押すことができたらどうでしょう？つまり、特別なモディファイア (リーダーキー)を押して、続けて W と C を押すと (単純にキーを高速に繋げます)、何かが起こります。
+
+それが `KC_LEAD` の機能です。以下は例です:
+
+1. リーダーキーとして使いたいキーボードのキーを選択します。それにキーコード `KC_LEAD` を割り当てます。このキーはこのためだけの専用です -- 単一アクションのキーで、他の用途には使うことができません。
+2. `config.h` に `#define LEADER_TIMEOUT 300` という行を追加します。これによって `KC_LEAD` キーのタイムアウトを設定します。具体的には、`KC_LEAD` キーを押してからリーダーキーのシーケンスを完了するまで一定の時間しかありません。ここでの `300` はそれを300msに設定します。この値を増やして、シーケンスを入力する時間を増やすことができます。ただし、この時間中に押されたキーは全て途中で遮られ、送信されません。そのためこの値は小さくしておいたほうが良いかもしれません。
+   * デフォルトでは、このタイムアウトは、`KC_LEAD` を押してからシーケンス全体が完了するまでに掛かる時間です。これは一部の人にとっては非常に短いかもしれません。そのため、このタイムアウトを増やしたほうが良い場合もあります。必要に応じて、`LEADER_PER_KEY_TIMING` オプションを有効にしたほうが良い場合もあります。これは各キーがタップされる度にタイムアウトまでの時間をリセットする機能です。これにより、タイムアウト時間を短くしつつも、比較的長いシーケンスを使うことができます。このオプションを有効にするには、`config.h` に `#define LEADER_PER_KEY_TIMING` を追加します。
+3. `matrix_scan_user` 関数の中で、以下のようなものを追加します:
+
+```c
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+  LEADER_DICTIONARY() {
+    leading = false;
+    leader_end();
+
+    SEQ_ONE_KEY(KC_F) {
+      // マクロ内でできること
+      SEND_STRING("QMK is awesome.");
+    }
+    SEQ_TWO_KEYS(KC_D, KC_D) {
+      SEND_STRING(SS_LCTL("a") SS_LCTL("c"));
+    }
+    SEQ_THREE_KEYS(KC_D, KC_D, KC_S) {
+      SEND_STRING("https://start.duckduckgo.com\n");
+    }
+    SEQ_TWO_KEYS(KC_A, KC_S) {
+      register_code(KC_LGUI);
+      register_code(KC_S);
+      unregister_code(KC_S);
+      unregister_code(KC_LGUI);
+    }
+  }
+}
+```
+
+ご覧のとおり、幾つかの関数があります。`SEQ_ONE_KEY` を単一キーシーケンス (リーダーの後に1つのキーのみ)に使い、より長いシーケンスについては `SEQ_TWO_KEYS`、`SEQ_THREE_KEYS` から `SEQ_FIVE_KEYS` を使うことができます。
+
+これらはそれぞれ1つ以上のキーコードを引数として受け付けます。これは重要な点です: **キーボードの任意のレイヤー**のキーコードを使うことができます。当たり前ですが、リーダーマクロが発動するにはそのレイヤーがアクティブである必要があります
+
+## `rules.mk` にリーダーキーサポートを追加
+
+リーダーキーのサポートを追加するには、単純にキーマップの `rules.mk` に1行を追加します:
+
+```make
+LEADER_ENABLE = yes
+```
+
+## リーダーキーのキーごとのタイミング
+
+長いリーダーキー文字列のためや 200wpm のタイピングスキルが無い場合に、非常に長いタイムアウト時間に頼るのではなく、キーを押すごとに入力を完了するまでの時間を増やす機能を使用することができます。これは、リーダーキーを使ってタップダンスを再現する場合に非常に役立ちます (C, C, C のような同じキーを複数回タップする場合)。
+
+これを有効にするには、以下を `config.h` に配置します:
+```c
+#define LEADER_PER_KEY_TIMING
+```
+
+この後、`LEADER_TIMEOUT` を 300ms 未満に下げることをお勧めします。
+
+```c
+#define LEADER_TIMEOUT 250
+```
+
+これで、リーダーキーのタイムアウト時間を 1000ms に設定することなく以下のようなことが可能になると思われます。
+
+```c
+SEQ_THREE_KEYS(KC_C, KC_C, KC_C) {
+  SEND_STRING("Per key timing is great!!!");
+}
+```
+
+## 厳密なキー処理
+
+デフォルトでは、リーダーキー機能は、リーダーシーケンスの確認時に [`モッドタップ`](ja/mod_tap.md) および [`レイヤータップ`](ja/feature_layers.md#switching-and-toggling-layers) 機能からのキーコードをフィルターします。つまり、`LT(3, KC_A)` を使っている場合、`LT(3, KC_A)` ではなくシーケンスの `KC_A` として取り出され、新しいユーザにとってより期待される動作を提供します。
+
+ほとんどの場合これで問題ありませんが、シーケンスでキーコード全体(例えば、上の例での `LT(3, KC_A)`) を指定したい場合は、`config.h` ファイルに `#define LEADER_KEY_STRICT_KEY_PROCESSING` を追加することこのような機能を有効にすることができます。これでフィルタリングが無効になり、キーコード全体を指定する必要があります。
+
+## カスタマイズ
+
+リーダーキー機能には、リーダーキー機能の動作にいくらかのカスタマイズを追加する方法があります。リーダーキー機能のプロセスの特定の部分で呼び出すことができる2つの関数、`leader_start()` と `leader_end()` です。
+
+`KC_LEAD` キーがタップされた時に `leader_start()` 関数が呼ばれ、リーダーシーケンスが完了するか、リーダータイムアウトの時間に達した時に `leader_end()` 関数が呼ばれます。
+
+リーダーシーケンスにフィードバック(ビープまたは音楽を再生するなど)を追加するために、これらの関数をコード (通常 は`keymap.c`)に追加することができます。
+
+```c
+void leader_start(void) {
+  // シーケンスの開始
+}
+
+void leader_end(void) {
+  // シーケンスの終了 (成功しない/失敗を検知)
+}
+```
+
+### 例
+
+この例では、リーダーシーケンスを開始するために `KC_LEAD` を押すとマリオの "One Up" 音が再生され、正常に完了した場合は "All Star" が再生され、失敗した場合は "Rick Roll" を再生されます。
+
+```c
+bool did_leader_succeed;
+#ifdef AUDIO_ENABLE
+float leader_start[][2] = SONG(ONE_UP_SOUND );
+float leader_succeed[][2] = SONG(ALL_STAR);
+float leader_fail[][2] = SONG(RICK_ROLL);
+#endif
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+  LEADER_DICTIONARY() {
+    did_leader_succeed = leading = false;
+
+    SEQ_ONE_KEY(KC_E) {
+      // マクロ内でできること
+      SEND_STRING(SS_LCTL(SS_LSFT("t")));
+      did_leader_succeed = true;
+    } else
+    SEQ_TWO_KEYS(KC_E, KC_D) {
+      SEND_STRING(SS_LGUI("r") "cmd\n" SS_LCTL("c"));
+      did_leader_succeed = true;
+    }
+    leader_end();
+  }
+}
+
+void leader_start(void) {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_start);
+#endif
+}
+
+void leader_end(void) {
+  if (did_leader_succeed) {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_succeed);
+#endif
+  } else {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_fail);
+#endif
+  }
+}
+```

docs/ja/feature_led_matrix.md

@@ -0,0 +1,95 @@
+# LED マトリックスライト
+
+<!---
+  original document: 0.8.141:docs/feature_led_matrix.md
+  git diff 0.8.141 HEAD -- docs/feature_led_matrix.md | cat
+-->
+
+この機能により、外部ドライバによって駆動される LED マトリックスを使うことができます。この機能は、バックライト制御と同じキーコードを使えるようにするため、バックライトシステムに接続します。
+
+RGB LED を使いたい場合は、代わりに [RGB マトリックスサブシステム](ja/feature_rgb_matrix.md) を使うべきです。
+
+## ドライバ設定
+
+### IS31FL3731
+
+I2C IS31FL3731 RGB コントローラを使ったアドレス指定可能な LED マトリックスライトのための基本的なサポートがあります:有効にするには、`rules.mk` に以下を追加します:
+
+    LED_MATRIX_ENABLE = IS31FL3731
+
+1から4個の IS31FL3731 IC を使うことができます。キーボード上に存在しない IC の `LED_DRIVER_ADDR_<N>` 定義を指定しないでください。`config.h` に以下の項目を定義することができます:
+
+| 変数 | 説明 | デフォルト |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (オプション) i2c メッセージを待つ時間 | 100 |
+| `ISSI_PERSISTENCE` | (オプション) 失敗したメッセージをこの回数再試行する | 0 |
+| `LED_DRIVER_COUNT` | (必須) LED ドライバ IC の数 |  |
+| `LED_DRIVER_LED_COUNT` | (必須) 全てのドライバの LED ライトの数 |  |
+| `LED_DRIVER_ADDR_1` | (必須) 最初の LED ドライバのアドレス |  |
+| `LED_DRIVER_ADDR_2` | (オプション) 2番目の LED ドライバのアドレス |  |
+| `LED_DRIVER_ADDR_3` | (オプション) 3番目の LED ドライバのアドレス |  |
+| `LED_DRIVER_ADDR_4` | (オプション) 4番目の LED ドライバのアドレス |  |
+
+2つのドライバを使う例です。
+
+    // これは7ビットのアドレスで、左シフトされます
+    // ビット0に0を設定すると書き込み、1を設定すると読み込みです (I2C プロトコルに従う)
+    // アドレスは配線によって変わります:
+    // 0b1110100 AD <-> GND
+    // 0b1110111 AD <-> VCC
+    // 0b1110101 AD <-> SCL
+    // 0b1110110 AD <-> SDA
+    #define LED_DRIVER_ADDR_1 0b1110100
+    #define LED_DRIVER_ADDR_2 0b1110110
+    
+    #define LED_DRIVER_COUNT 2
+    #define LED_DRIVER_1_LED_COUNT 25
+    #define LED_DRIVER_2_LED_COUNT 24
+    #define LED_DRIVER_LED_COUNT LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL
+
+現在、2つのドライバのみがサポートされますが、4つの組み合わせ全てをサポートすることは簡単です。
+
+`<keyboard>.c` に全ての LED を列挙する配列を定義します:
+
+    const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+    /* これらの位置については IS31 マニュアルを参照してください
+    *   driver
+    *   |  LED address
+    *   |  | */
+    {0, C3_3},
+    ....
+    }
+
+ここで、`Cx_y` は[データシート](http://www.issi.com/WW/pdf/31FL3731.pdf)およびヘッダファイル `drivers/issi/is31fl3731-simple.h` で定義されるマトリックス内の LED の位置です。`driver` は `config.h` で定義したドライバのインデックス(`0`、`1`、`2`、`3`のいずれか)です。
+
+## キーコード
+
+現在のところ、全ての LED マトリックスのキーコードは[バックライトシステム](ja/feature_backlight.md)と共有されます。
+
+## LED マトリックス効果
+
+現在のところ、LED マトリックス効果は作成されていません。
+
+## カスタムレイヤー効果
+
+カスタムレイヤー効果は `<keyboard>.c` 内で以下を定義することで行うことができます:
+
+    void led_matrix_indicators_kb(void) {
+    led_matrix_set_index_value(index, value);
+    }
+
+同様の関数がキーマップ内で `led_matrix_indicators_user` として動作します。
+
+## サスペンド状態
+
+サスペンド機能を使うには、以下を `<keyboard>.c` に追加します:
+
+    void suspend_power_down_kb(void)
+    {
+    led_matrix_set_suspend_state(true);
+    }
+    
+    void suspend_wakeup_init_kb(void)
+    {
+    led_matrix_set_suspend_state(false);
+    }

docs/ja/feature_thermal_printer.md

@@ -0,0 +1,15 @@
+# 感熱式プリンタ
+
+<!---
+  original document: 0.8.147:docs/feature_thermal_printer.md
+  git diff 0.8.147 HEAD -- docs/feature_thermal_printer.md | cat
+-->
+
+<!-- FIXME: Describe thermal printers support here. -->
+
+## 感熱式プリンタのキーコード
+
+| キー | 説明 |
+|-----------|----------------------------------------|
+| `PRINT_ON` | ユーザが入力した全ての印刷を開始 |
+| `PRINT_OFF` | ユーザが入力した全ての印刷を停止 |

docs/ja/feature_velocikey.md

@@ -0,0 +1,35 @@
+# Velocikey
+
+<!---
+  original document: 0.8.147:docs/feature_velocikey.md
+  git diff 0.8.147 HEAD -- docs/feature_velocikey.md | cat
+-->
+
+Velocikey は入力の速度を使って(レインボー渦巻効果のような)ライト効果の速度を制御できる機能です。速く入力すればするほどライトが速くなります！
+
+## 使用法
+Velocikey を使うためには、2つのステップがあります。最初に、キーボードをコンパイルする時に、`rules.mk` に `VELOCIKEY_ENABLE=yes` を設定する必要があります。例えば:
+
+```
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+STENO_ENABLE = no
+EXTRAKEY_ENABLE = yes
+VELOCIKEY_ENABLE = yes
+```
+
+次に、キーボードの使用中に、VLK_TOG キーコードを使って Velocikey を有効にする必要もあります。これは機能をオンおよびオフにします。
+
+以下の全てのライト効果が、Velocikey を有効にすることで制御されます:
+- RGB 明滅動作
+- RGB レインボームード
+- RGB レインボー渦巻
+- RGB スネーク
+- RGB ナイト
+
+LED 明滅動作の効果のサポートは計画されていますがまだ利用できません。
+
+Velocikey が有効になっている限り、現在オンになっている RGB ライトの他の全ての速度設定に関係なく、速度が制御されます。
+
+## 設定
+Velocikey は現在のところキーボード設定を介したどのような設定もサポートしません。速度の増加あるいは減少率などを調整したい場合は、`velocikey.c` を編集し、そこで値を調整して、好みの速度を実現する必要があります。

docs/keycodes.md

@@ -531,6 +531,7 @@ See also: [Swap Hands](feature_swap_hands.md)
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+|`SH_OS`    |One shot swap hands: toggle while pressed or until next key press.       |
 
 ## Unicode Support :id=unicode-support
 

docs/keymap.md

@@ -71,10 +71,22 @@ On the other hand, you can change `layer_state` to overlay the base layer with o
 
 
 ### Layer Precedence and Transparency
-Note that ***higher layer has higher priority on stack of layers***, namely firmware falls down from top layer to bottom to look up keycode. Once it spots keycode other than **`KC_TRNS`**(transparent) on a layer it stops searching and lower layers aren't referred.
+Note that ***higher layers have higher priority within the stack of layers***. The firmware works its way down from the highest active layers to look up keycodes. Once the firmware locates a keycode other than `KC_TRNS` (transparent) on an active layer, it stops searching, and lower layers aren't referenced.
 
-You can place `KC_TRANS` on overlay layer changes just part of layout to fall back on lower or base layer.
-Key with `KC_TRANS` (`KC_TRNS` and `_______` are the alias) doesn't has its own keycode and refers to lower valid layers for keycode, instead.
+           ____________
+          /           /  <--- Higher layer
+         /  KC_TRNS  //
+        /___________//   <--- Lower layer (KC_A)
+        /___________/
+    
+    In the above scenario, the non-transparent keys on the higher layer would be usable, but whenever `KC_TRNS` (or equivalent) is defined, the keycode (`KC_A`) on the lower level would be used.
+
+**Note:** Valid ways to denote transparency on a given layer:
+* `KC_TRANSPARENT`
+* `KC_TRNS` (alias)
+* `_______` (alias)
+
+These keycodes allow the processing to fall through to lower layers in search of a non-transparent keycode to process.
 
 ## Anatomy of a `keymap.c`
 

docs/newbs_getting_started.md

@@ -57,10 +57,9 @@ You may be asked to close and reopen the window. Do this and keep running the ab
 
 You will need to install Homebrew. Follow the instructions on the [Homebrew homepage](https://brew.sh).
 
-After Homebrew is installed run these commands:
+After Homebrew is installed run this command:
 
-    brew tap qmk/qmk
-    brew install qmk
+    brew install qmk/qmk/qmk
 
 ### Linux
 

drivers/eeprom/eeprom_driver.c

@@ -20,19 +20,19 @@
 #include "eeprom_driver.h"
 
 uint8_t eeprom_read_byte(const uint8_t *addr) {
-    uint8_t ret;
+    uint8_t ret = 0;
     eeprom_read_block(&ret, addr, 1);
     return ret;
 }
 
 uint16_t eeprom_read_word(const uint16_t *addr) {
-    uint16_t ret;
+    uint16_t ret = 0;
     eeprom_read_block(&ret, addr, 2);
     return ret;
 }
 
 uint32_t eeprom_read_dword(const uint32_t *addr) {
-    uint32_t ret;
+    uint32_t ret = 0;
     eeprom_read_block(&ret, addr, 4);
     return ret;
 }

drivers/eeprom/eeprom_i2c.c

@@ -50,7 +50,7 @@ static inline void init_i2c_if_required(void) {
 }
 
 static inline void fill_target_address(uint8_t *buffer, const void *addr) {
-    intptr_t p = (intptr_t)addr;
+    uintptr_t p = (uintptr_t)addr;
     for (int i = 0; i < EXTERNAL_EEPROM_ADDRESS_SIZE; ++i) {
         buffer[EXTERNAL_EEPROM_ADDRESS_SIZE - 1 - i] = p & 0xFF;
         p >>= 8;
@@ -60,11 +60,19 @@ static inline void fill_target_address(uint8_t *buffer, const void *addr) {
 void eeprom_driver_init(void) {}
 
 void eeprom_driver_erase(void) {
+#ifdef CONSOLE_ENABLE
+    uint32_t start = timer_read32();
+#endif
+
     uint8_t buf[EXTERNAL_EEPROM_PAGE_SIZE];
     memset(buf, 0x00, EXTERNAL_EEPROM_PAGE_SIZE);
-    for (intptr_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) {
-        eeprom_write_block(buf, (void *)addr, EXTERNAL_EEPROM_PAGE_SIZE);
+    for (uint32_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) {
+        eeprom_write_block(buf, (void *)(uintptr_t)addr, EXTERNAL_EEPROM_PAGE_SIZE);
     }
+
+#ifdef CONSOLE_ENABLE
+    dprintf("EEPROM erase took %ldms to complete\n", ((long)(timer_read32() - start)));
+#endif
 }
 
 void eeprom_read_block(void *buf, const void *addr, size_t len) {
@@ -72,8 +80,8 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
     fill_target_address(complete_packet, addr);
 
     init_i2c_if_required();
-    i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100);
-    i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), buf, len, 100);
+    i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100);
+    i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), buf, len, 100);
 
 #ifdef DEBUG_EEPROM_OUTPUT
     dprintf("[EEPROM R] 0x%04X: ", ((int)addr));
@@ -85,14 +93,14 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
 }
 
 void eeprom_write_block(const void *buf, void *addr, size_t len) {
-    uint8_t  complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + EXTERNAL_EEPROM_PAGE_SIZE];
-    uint8_t *read_buf    = (uint8_t *)buf;
-    intptr_t target_addr = (intptr_t)addr;
+    uint8_t   complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + EXTERNAL_EEPROM_PAGE_SIZE];
+    uint8_t * read_buf    = (uint8_t *)buf;
+    uintptr_t target_addr = (uintptr_t)addr;
 
     init_i2c_if_required();
     while (len > 0) {
-        intptr_t page_offset  = target_addr % EXTERNAL_EEPROM_PAGE_SIZE;
-        int      write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset;
+        uintptr_t page_offset  = target_addr % EXTERNAL_EEPROM_PAGE_SIZE;
+        int       write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset;
         if (write_length > len) {
             write_length = len;
         }
@@ -110,7 +118,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
         dprintf("\n");
 #endif  // DEBUG_EEPROM_OUTPUT
 
-        i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100);
+        i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100);
         wait_ms(EXTERNAL_EEPROM_WRITE_TIME);
 
         read_buf += write_length;

drivers/eeprom/eeprom_spi.c

@@ -0,0 +1,231 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+/*
+    Note that the implementations of eeprom_XXXX_YYYY on AVR are normally
+    provided by avr-libc. The same functions are reimplemented below and are
+    rerouted to the external SPI equivalent.
+
+    Seemingly, as this is compiled from within QMK, the object file generated
+    during the build overrides the avr-libc implementation during the linking
+    stage.
+
+    On other platforms such as ARM, there are no provided implementations, so
+    there is nothing to override during linkage.
+*/
+
+#include "wait.h"
+#include "spi_master.h"
+#include "eeprom.h"
+#include "eeprom_spi.h"
+
+#define CMD_WREN 6
+#define CMD_WRDI 4
+#define CMD_RDSR 5
+#define CMD_WRSR 1
+#define CMD_READ 3
+#define CMD_WRITE 2
+
+#define SR_WIP 0x01
+
+// #define DEBUG_EEPROM_OUTPUT
+
+#ifndef EXTERNAL_EEPROM_SPI_TIMEOUT
+#    define EXTERNAL_EEPROM_SPI_TIMEOUT 100
+#endif
+
+#ifdef CONSOLE_ENABLE
+#    include "print.h"
+#endif  // CONSOLE_ENABLE
+
+static void init_spi_if_required(void) {
+    static int done = 0;
+    if (!done) {
+        spi_init();
+        done = 1;
+    }
+}
+
+static bool spi_eeprom_start(void) { return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR); }
+
+static spi_status_t spi_eeprom_wait_while_busy(int timeout) {
+    uint32_t     deadline = timer_read32() + timeout;
+    spi_status_t response;
+    do {
+        spi_write(CMD_RDSR);
+        response = spi_read();
+        if (timer_read32() >= deadline) {
+            return SPI_STATUS_TIMEOUT;
+        }
+    } while (response & SR_WIP);
+    return SPI_STATUS_SUCCESS;
+}
+
+static void spi_eeprom_transmit_address(uintptr_t addr) {
+    uint8_t buffer[EXTERNAL_EEPROM_ADDRESS_SIZE];
+
+    for (int i = 0; i < EXTERNAL_EEPROM_ADDRESS_SIZE; ++i) {
+        buffer[EXTERNAL_EEPROM_ADDRESS_SIZE - 1 - i] = addr & 0xFF;
+        addr >>= 8;
+    }
+
+    spi_transmit(buffer, EXTERNAL_EEPROM_ADDRESS_SIZE);
+}
+
+//----------------------------------------------------------------------------------------------------------------------
+
+void eeprom_driver_init(void) {}
+
+void eeprom_driver_erase(void) {
+#ifdef CONSOLE_ENABLE
+    uint32_t start = timer_read32();
+#endif
+
+    uint8_t buf[EXTERNAL_EEPROM_PAGE_SIZE];
+    memset(buf, 0x00, EXTERNAL_EEPROM_PAGE_SIZE);
+    for (uint32_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) {
+        eeprom_write_block(buf, (void *)(uintptr_t)addr, EXTERNAL_EEPROM_PAGE_SIZE);
+    }
+
+#ifdef CONSOLE_ENABLE
+    dprintf("EEPROM erase took %ldms to complete\n", ((long)(timer_read32() - start)));
+#endif
+}
+
+void eeprom_read_block(void *buf, const void *addr, size_t len) {
+    init_spi_if_required();
+
+    //-------------------------------------------------
+    // Wait for the write-in-progress bit to be cleared
+    bool res = spi_eeprom_start();
+    if (!res) {
+        dprint("failed to start SPI for WIP check\n");
+        memset(buf, 0, len);
+        return;
+    }
+
+    spi_status_t response = spi_eeprom_wait_while_busy(EXTERNAL_EEPROM_SPI_TIMEOUT);
+    spi_stop();
+    if (response == SPI_STATUS_TIMEOUT) {
+        dprint("SPI timeout for WIP check\n");
+        memset(buf, 0, len);
+        return;
+    }
+
+    //-------------------------------------------------
+    // Perform read
+    res = spi_eeprom_start();
+    if (!res) {
+        dprint("failed to start SPI for read\n");
+        memset(buf, 0, len);
+        return;
+    }
+
+    spi_write(CMD_READ);
+    spi_eeprom_transmit_address((uintptr_t)addr);
+    spi_receive(buf, len);
+
+#ifdef DEBUG_EEPROM_OUTPUT
+    dprintf("[EEPROM R] 0x%08lX: ", ((uint32_t)(uintptr_t)addr));
+    for (size_t i = 0; i < len; ++i) {
+        dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
+    }
+    dprintf("\n");
+#endif  // DEBUG_EEPROM_OUTPUT
+
+    spi_stop();
+}
+
+void eeprom_write_block(const void *buf, void *addr, size_t len) {
+    init_spi_if_required();
+
+    bool      res;
+    uint8_t * read_buf    = (uint8_t *)buf;
+    uintptr_t target_addr = (uintptr_t)addr;
+
+    while (len > 0) {
+        uintptr_t page_offset  = target_addr % EXTERNAL_EEPROM_PAGE_SIZE;
+        int       write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset;
+        if (write_length > len) {
+            write_length = len;
+        }
+
+        //-------------------------------------------------
+        // Wait for the write-in-progress bit to be cleared
+        res = spi_eeprom_start();
+        if (!res) {
+            dprint("failed to start SPI for WIP check\n");
+            return;
+        }
+
+        spi_status_t response = spi_eeprom_wait_while_busy(EXTERNAL_EEPROM_SPI_TIMEOUT);
+        spi_stop();
+        if (response == SPI_STATUS_TIMEOUT) {
+            dprint("SPI timeout for WIP check\n");
+            return;
+        }
+
+        //-------------------------------------------------
+        // Enable writes
+        res = spi_eeprom_start();
+        if (!res) {
+            dprint("failed to start SPI for write-enable\n");
+            return;
+        }
+
+        spi_write(CMD_WREN);
+        spi_stop();
+
+        //-------------------------------------------------
+        // Perform the write
+        res = spi_eeprom_start();
+        if (!res) {
+            dprint("failed to start SPI for write\n");
+            return;
+        }
+
+#ifdef DEBUG_EEPROM_OUTPUT
+        dprintf("[EEPROM W] 0x%08lX: ", ((uint32_t)(uintptr_t)target_addr));
+        for (size_t i = 0; i < write_length; i++) {
+            dprintf(" %02X", (int)(uint8_t)(read_buf[i]));
+        }
+        dprintf("\n");
+#endif  // DEBUG_EEPROM_OUTPUT
+
+        spi_write(CMD_WRITE);
+        spi_eeprom_transmit_address(target_addr);
+        spi_transmit(read_buf, write_length);
+        spi_stop();
+
+        read_buf += write_length;
+        target_addr += write_length;
+        len -= write_length;
+    }
+
+    //-------------------------------------------------
+    // Disable writes
+    res = spi_eeprom_start();
+    if (!res) {
+        dprint("failed to start SPI for write-disable\n");
+        return;
+    }
+
+    spi_write(CMD_WRDI);
+    spi_stop();
+}

drivers/eeprom/eeprom_spi.h

@@ -0,0 +1,80 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/*
+    The slave select pin of the EEPROM.
+    This needs to be a normal GPIO pin_t value, such as A7.
+*/
+#ifndef EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN
+#    error "No chip select pin defined -- missing EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN"
+#endif
+
+/*
+    The clock divisor for SPI to ensure that the MCU is within the
+    specifications of the EEPROM chip. Generally this will be PCLK divided by
+    the intended divisor -- check your clock settings and the datasheet of
+    your EEPROM.
+*/
+#ifndef EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR
+#    ifdef __AVR__
+#        define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8
+#    else
+#        define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
+#    endif
+#endif
+
+/*
+    The SPI mode to communicate with the EEPROM.
+*/
+#ifndef EXTERNAL_EEPROM_SPI_MODE
+#    define EXTERNAL_EEPROM_SPI_MODE 0
+#endif
+
+/*
+    Whether or not the SPI communication between the MCU and EEPROM should be
+    LSB-first.
+*/
+#ifndef EXTERNAL_EEPROM_SPI_LSBFIRST
+#    define EXTERNAL_EEPROM_SPI_LSBFIRST false
+#endif
+
+/*
+    The total size of the EEPROM, in bytes. The EEPROM datasheet will usually
+    specify this value in kbits, and will require conversion to bytes.
+*/
+#ifndef EXTERNAL_EEPROM_BYTE_COUNT
+#    define EXTERNAL_EEPROM_BYTE_COUNT 8192
+#endif
+
+/*
+    The page size in bytes of the EEPROM, as specified in the datasheet.
+*/
+#ifndef EXTERNAL_EEPROM_PAGE_SIZE
+#    define EXTERNAL_EEPROM_PAGE_SIZE 32
+#endif
+
+/*
+    The address size in bytes of the EEPROM. For EEPROMs with <=256 bytes, this
+    will likely be 1. For EEPROMs >256 and <=65536, this will be 2. For EEPROMs
+    >65536, this will likely need to be 4.
+
+    As expected, consult the datasheet for specifics of your EEPROM.
+*/
+#ifndef EXTERNAL_EEPROM_ADDRESS_SIZE
+#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
+#endif

drivers/oled/oled_driver.c

@@ -479,7 +479,7 @@ void oled_write_ln_P(const char *data, bool invert) {
 void oled_write_raw_P(const char *data, uint16_t size) {
     if (size > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE;
     for (uint16_t i = 0; i < size; i++) {
-        uint8_t c = pgm_read_byte(++data);
+        uint8_t c = pgm_read_byte(data++);
         if (oled_buffer[i] == c) continue;
         oled_buffer[i] = c;
         oled_dirty |= (1 << (i / OLED_BLOCK_SIZE));

keyboards/1upkeyboards/super16/keymaps/nblyumberg/config.h

@@ -0,0 +1,13 @@
+#pragma once
+
+// Time out one shot layers after 3 seconds
+#define ONESHOT_TIMEOUT 3000
+
+#define RGBLED_NUM 16
+
+
+// Undef and redefine default brightness to half of 255
+#undef RGBLIGHT_LIMIT_VAL
+#define RGBLIGHT_LIMIT_VAL 128
+
+#define TAPPING_TERM 200

keyboards/1upkeyboards/super16/keymaps/nblyumberg/keymap.c

@@ -0,0 +1,127 @@
+#include QMK_KEYBOARD_H
+
+uint16_t copy_paste_timer;
+uint16_t enter_timer;
+
+extern rgblight_config_t rgblight_config;
+
+// Define custom keycodes
+enum my_keycodes {
+	KC_CCCV = SAFE_RANGE,
+	KC_2ENTER
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+        //Layer 0 - Base Layer (F13 to F24, and One Shot Layer 1,2,3,4)
+        [0] = LAYOUT_ortho_4x4(
+                KC_F13, KC_F14, KC_F15, KC_F16,
+                KC_F17, KC_CCCV, KC_F19, KC_F20,
+                KC_F21, KC_F22, KC_F23, KC_2ENTER,
+                OSL(1), OSL(2), OSL(3), TG(4)    //Transparent to let you go between layers
+		),
+
+        [1] = LAYOUT_ortho_4x4(
+                LALT(KC_F13), LALT(KC_F14), LALT(KC_F15), LALT(KC_F16),
+                LALT(KC_F17), LALT(KC_F18), LALT(KC_F19), LALT(KC_F20),
+                LALT(KC_F21), LALT(KC_F22), LALT(KC_F23), LALT(KC_F24),
+                KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS         //Transparent to let you go between layers
+        ),
+
+        //Layer 2 - Shift + Function Key Layer
+        [2] = LAYOUT_ortho_4x4(
+                LSFT(KC_F13), LSFT(KC_F14), LSFT(KC_F15), LSFT(KC_F16),
+                LSFT(KC_F17), LSFT(KC_F18), LSFT(KC_F19), LSFT(KC_F20),
+                LSFT(KC_F21), LSFT(KC_F22), LSFT(KC_F23), LSFT(KC_F24),
+                KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS         //Transparent to let you go between layers
+        ),
+
+        //Layer 3 - Control + Function Key
+        [3] = LAYOUT_ortho_4x4(
+                LCTL(KC_F13), LCTL(KC_F14), LCTL(KC_F15), LCTL(KC_F16),
+                LCTL(KC_F17), LCTL(KC_F18), LCTL(KC_F19), LCTL(KC_F20),
+                LCTL(KC_F21), LCTL(KC_F22), LCTL(KC_F23), LCTL(KC_F24),
+                KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS         //Transparent to let you go between layers
+        ),
+
+        //Layer 4 - Keyboard Lights. Programming and Special Functions
+        [4] = LAYOUT_ortho_4x4(
+                KC_MPRV, KC_MPLY, KC_MNXT,   KC_VOLU,
+                RGB_TOG, RGB_MOD, RGB_RMOD,  KC_MUTE,
+                TO(0),   RESET,   EEP_RST, KC_VOLD,
+                KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS         //Transparent to let you go between layers
+        ),
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_CCCV:  // One key copy/paste
+            if (record->event.pressed) {
+                copy_paste_timer = timer_read();
+            } else {
+                if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) {  // Hold, copy
+                    tap_code16(LCTL(KC_C));
+                } else {  // Tap, paste
+                    tap_code16(LCTL(KC_V));
+                }
+            } return true;
+		case KC_2ENTER:
+		    if (record->event.pressed) {
+                enter_timer = timer_read();
+            } else {
+                if (timer_elapsed(enter_timer) > TAPPING_TERM) {  // Hold, shift+enter
+                    tap_code16(LSFT(KC_ENTER));
+                } else {  // Tap, enter
+                    tap_code16(KC_F24);
+                }
+            } 
+			return true;
+        default:
+            return true;
+    }
+}
+
+
+void keyboard_post_init_user(void) {
+	//Enable the LED layers
+	layer_state_set_user(layer_state);
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  rgblight_sethsv_noeeprom(HSV_WHITE);
+  switch(get_highest_layer(state)) {
+  case 1:
+    // Green
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_noeeprom(HSV_GREEN);
+    break;
+  case 2:
+    // Red
+    rgblight_enable_noeeprom();	
+    rgblight_sethsv_noeeprom(HSV_RED);
+    break;
+  case 3:
+    // Blue
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_noeeprom(HSV_BLUE);
+    break;
+  case 4:
+    // Orange
+    rgblight_enable_noeeprom();
+//    rgblight_sethsv_noeeprom(HSV_PURPLE);
+    rgblight_sethsv_noeeprom(HSV_ORANGE);
+    break;
+  default:
+    // White
+    //Read RGB Light State
+    rgblight_config.raw = eeconfig_read_rgblight();
+    //If enabled, set white
+    if (rgblight_config.enable) {
+		rgblight_sethsv_noeeprom(HSV_WHITE);
+	} else { //Otherwise go back to disabled
+		rgblight_disable_noeeprom();
+	}
+    break;
+}
+return state;
+}

keyboards/1upkeyboards/super16/keymaps/nblyumberg/readme.md

@@ -0,0 +1,6 @@
+# Nick B's Super16 keymap
+
+A modification of the default keymap to include layer indicators with RGB
+* Added a time out of 3 seconds to 1 shot layers
+* Reduced brightness to half to reduce power draw
+* Added a one key copy/paste keycode  

keyboards/1upkeyboards/super16/keymaps/nblyumberg/rules.mk

@@ -0,0 +1,2 @@
+RGB_MATRIX_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/acheron/elongate/config.h

@@ -0,0 +1,250 @@
+/*
+Copyright 2020 Gondolindrim
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4150 //AP for AcheronProject
+#define PRODUCT_ID 0x454C // EL for Elongate
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Acheron Project
+#define PRODUCT Elongate
+#define DESCRIPTION Acheron Project Elongate
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D3, B7, D5, B5, D6 }
+#define MATRIX_COL_PINS { F5, F6, F4, F1, F0, B2, B1, C6, B0, B3, E6, D4, B4}
+//#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D7
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 16
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//  #define RGBLIGHT_EFFECT_BREATHING
+//  #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//  #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//  #define RGBLIGHT_EFFECT_SNAKE
+//  #define RGBLIGHT_EFFECT_KNIGHT
+//  #define RGBLIGHT_EFFECT_CHRISTMAS
+//  #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//  #define RGBLIGHT_EFFECT_RGB_TEST
+//  #define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+  /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+  #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+  /*==== use exp() and sin() ====*/
+//  #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//  #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/acheron/elongate/elongate.c

@@ -0,0 +1,26 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "elongate.h"
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(D2, led_state.num_lock);
+        writePin(D1, led_state.caps_lock);
+        writePin(D0, led_state.scroll_lock);
+    }
+    return res;
+}

keyboards/acheron/elongate/elongate.h

@@ -0,0 +1,44 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the Keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define KNO KC_NO
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K49, K41, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, K1C, K4A, K42, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4B, K44, \
+    K30, K31, K32,      K34,           K37,      K3A, K3B, K3C, K3D, K4C, K47  \
+)\
+{\
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KNO, K1B, K1C }, \
+    { K20, KNO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
+    { K30, K31, K32, KNO, K34, KNO, KNO, K37, KNO, K3A, K3B, K3C, K3D }, \
+    { KNO, K41, K42, KNO, K44, KNO, KNO, K47, KNO, K49, K4A, K4B, K4C }  \
+}

keyboards/acheron/elongate/info.json

@@ -0,0 +1,70 @@
+{
+    "keyboard_name": "Elongate",
+    "url": "http://gondolindrim.github.io/AcheronDocs/elongate/introduction.html",
+    "maintainer": "Gondolindrim",
+    "width": 15.5,
+    "height": 4.25,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"Tab", "x":0, "y":0},
+                {"label":"Q", "x":1, "y":0},
+                {"label":"W", "x":2, "y":0},
+                {"label":"E", "x":3, "y":0},
+                {"label":"R", "x":4, "y":0},
+                {"label":"T", "x":5, "y":0},
+                {"label":"Y", "x":6, "y":0},
+                {"label":"U", "x":7, "y":0},
+                {"label":"I", "x":8, "y":0},
+                {"label":"O", "x":9, "y":0},
+                {"label":"P", "x":10, "y":0},
+                {"label":"Backspace", "x":11, "y":0},
+                {"label":"7", "x":12.5, "y":0},
+                {"label":"8", "x":13.5, "y":0},
+                {"label":"9", "x":14.5, "y":0},
+
+                {"label":"Caps Lock", "x":0, "y":1, "w":1.25},
+                {"label":"A", "x":1.25, "y":1},
+                {"label":"S", "x":2.25, "y":1},
+                {"label":"D", "x":3.25, "y":1},
+                {"label":"F", "x":4.25, "y":1},
+                {"label":"G", "x":5.25, "y":1},
+                {"label":"H", "x":6.25, "y":1},
+                {"label":"J", "x":7.25, "y":1},
+                {"label":"K", "x":8.25, "y":1},
+                {"label":"L", "x":9.25, "y":1},
+                {"label":"Enter", "x":10.25, "y":1.75},
+                {"label":"4", "x":12.5, "y":1},
+                {"label":"5", "x":13.5, "y":1},
+                {"label":"6", "x":14.5, "y":1},
+                
+                {"label":"Shift", "x":0, "y":2, "w":1.75},
+                {"label":"Z", "x":1.75, "y":2},
+                {"label":"X", "x":2.75, "y":2},
+                {"label":"C", "x":3.75, "y":2},
+                {"label":"V", "x":4.75, "y":2},
+                {"label":"B", "x":5.75, "y":2},
+                {"label":"N", "x":6.75, "y":2},
+                {"label":"M", "x":7.75, "y":2},
+                {"label":"<", "x":8.75, "y":2},
+                {"label":"Fn1", "x":9.75, "y":2},
+                {"label":"Up", "x":11.25, "y":2.25},
+                {"label":"1", "x":12.5, "y":2},
+                {"label":"2", "x":13.5, "y":2},
+                {"label":"3", "x":14.5, "y":2},
+                
+                {"label":"Ctrl", "x":0, "y":3, "w":1.25},
+                {"label":"Win", "x":1.25, "y":3},
+                {"label":"Alt", "x":2.25, "y":3, "w":1.25},
+                {"label":"Space/Fn2", "x":3.5, "y":3, "w":2.25},
+                {"label":"Space", "x":6.25, "y":3, "w":2.75},
+                {"label":"Alt", "x":9, "y":3},
+                {"label":"Left", "x":10.25, "y":3.25},
+                {"label":"Down", "x":11.25, "y":3.25},
+                {"label":"Right", "x":12.25, "y":3.25},
+                {"label":"0", "x":13.5, "y":3},
+                {"label":".", "x":14.5, "y":3},
+            ]
+        }
+    }
+}

keyboards/acheron/elongate/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+    KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,            KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,    KC_P7,    KC_P8,   KC_P9,
+    KC_SLCK,  KC_A,    KC_S,    KC_D,    KC_F,            KC_G,    KC_H,    KC_J,    KC_K,    KC_L,             KC_ENTER,   KC_P4,    KC_P5,   KC_P6,
+    KC_LSHIFT,         KC_Z,    KC_X,    KC_C,            KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, MO(1)  , KC_UP,      KC_P1,    KC_P2,   KC_P3,
+    KC_LCTRL, KC_LWIN, KC_LALT,          LT(2, KC_SPACE),                   KC_SPC,           KC_RALT, KC_LEFT, KC_DOWN,    KC_RIGHT, KC_P0,   KC_DOT),
+[1] = LAYOUT( /* Base */
+    KC_F1,    KC_F2,   KC_F2,   KC_F4,   KC_F5,           KC_F6,   KC_F7,   KC_F8,   KC_LBRC, KC_RBRC, KC_MINS,  KC_EQL,    KC_NLCK, KC_SLCK, KC_CAPS,
+    KC_1,     KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,              KC_RSHIFT, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_TRNS,  KC_PGUP,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,                           KC_SPC,           KC_TRNS, KC_HOME,  KC_PGDN,   KC_END , KC_TRNS, KC_TRNS),
+[2] = LAYOUT( /* Base */                                    
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,          RGB_TOG, RGB_MOD,  RGB_RMOD,        RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS ,                          KC_SPC,           KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/acheron/elongate/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Elongate

keyboards/acheron/elongate/keymaps/via/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3

keyboards/acheron/elongate/keymaps/via/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+    KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,            KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,    KC_P7,    KC_P8,   KC_P9,
+    KC_SLCK,  KC_A,    KC_S,    KC_D,    KC_F,            KC_G,    KC_H,    KC_J,    KC_K,    KC_L,             KC_ENTER,   KC_P4,    KC_P5,   KC_P6,
+    KC_LSHIFT,         KC_Z,    KC_X,    KC_C,            KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, MO(1)  , KC_UP,      KC_P1,    KC_P2,   KC_P3,
+    KC_LCTRL, KC_LWIN, KC_LALT,          LT(2, KC_SPACE),                   KC_SPC,           KC_RALT, KC_LEFT, KC_DOWN,    KC_RIGHT, KC_P0,   KC_DOT),
+[1] = LAYOUT( /* Base */
+    KC_F1,    KC_F2,   KC_F2,   KC_F4,   KC_F5,           KC_F6,   KC_F7,   KC_F8,   KC_LBRC, KC_RBRC, KC_MINS,  KC_EQL,    KC_NLCK, KC_SLCK, KC_CAPS,
+    KC_1,     KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,              KC_RSHIFT, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_TRNS,  KC_PGUP,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,                           KC_SPC,           KC_TRNS, KC_HOME,  KC_PGDN,   KC_END , KC_TRNS, KC_TRNS),
+[2] = LAYOUT( /* Base */                                    
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,          RGB_TOG, RGB_MOD,  RGB_RMOD,        RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS ,                          KC_SPC,           KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/acheron/elongate/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/acheron/elongate/readme.md

@@ -0,0 +1,25 @@
+# Acheron Aχξρων 45-S-ATMEGA-MX-TH-WI (codename "Elongate") QMK firmware
+
+<p align="center">
+  <img align="middle" src="https://raw.githubusercontent.com/Gondolindrim/acheronLibrary/master/graphics/acheronLong.png"  width="400"> 
+</p>
+
+## Introduction
+
+This is the QMK firmware repository for the ElongatePCN, compatible with revisions Beta and pre-Beta.
+
+The ElongatePCB is an Open-Hardware guidelines compliant PCB which files can be found at [this link](https://github.com/Gondolindrim/AElongate). Its designer and maintainer is [Gondolindrim](https://github.com/Gondolindrim).
+
+## PCB Documentation
+
+See the [AcheronDocs](https://gondolindrim.github.io/AcheronDocs/elongate/introduction.html) page for the ElongatePCB full documentation. You can also check the KiCad PCB files at the [Elongate GitHub repository](https://github.com/Gondolindrim/Elongate).
+
+Before using the files for personal or commercial use, please read the [Acheron Open-Hardware License V1.2](https://gondolindrim.github.io/AcheronDocs/license/license.html) under which the Austin PCB is published.
+
+## How to compile
+
+After setting up your build environment, you can compile the Austin default keymap by using:
+
+    make acheron/elongate:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/acheron/elongate/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+LTO_ENABLE = yes

keyboards/alps64/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6464
+#define VENDOR_ID       0x6873 //hs "Hasu"
+#define PRODUCT_ID      0x6464 //Alps"64"
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Hasu
 #define PRODUCT         Alps64
@@ -48,6 +48,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+/* Bootmagic Lite Support*/
+#define BOOTMAGIC_LITE_ROW 3
+#define BOOTMAGIC_LITE_COLUMN 6
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/alps64/keymaps/via/keymap.c

@@ -0,0 +1,37 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* 0: qwerty */
+  [0] = LAYOUT_all(
+    KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NUHS, KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_ESC,
+    KC_LCTL, KC_LGUI, KC_LALT,                 KC_SPC,                                  KC_APP,  KC_RALT, KC_RGUI, KC_RCTL
+  ),
+
+  [1] = LAYOUT_all(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_DEL,
+    KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,                 KC_TRNS,                                  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [2] = LAYOUT_all(
+    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,                 KC_TRNS,                                  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [3] = LAYOUT_all(
+    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,                 KC_TRNS,                                  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+};

keyboards/alps64/keymaps/via/rules.mk

@@ -0,0 +1,4 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = no

keyboards/arabica37/arabica37.c

@@ -0,0 +1 @@
+#include "arabica37.h"

keyboards/arabica37/arabica37.h

@@ -0,0 +1,5 @@
+#pragma once
+
+#ifdef KEYBOARD_arabica37_rev1
+  #include "rev1.h"
+#endif

keyboards/arabica37/config.h

@@ -1,5 +1,6 @@
 /*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -14,17 +15,7 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include "keymap.h"
 
+#pragma once
 
-/* translates key to keycode */
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
-    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
-}
-
-/* translates Fn keycode to action */
-action_t keymap_fn_to_action(uint8_t keycode)
-{
-    return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
-}
+#include "config_common.h"

keyboards/arabica37/info.json

@@ -0,0 +1,65 @@
+{
+    "keyboard_name": "arabica37 rev. 1",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15.25,
+    "height": 5.75,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Esc", "x":0.25, "y":0.75},
+                {"label":"Q", "x":1.25, "y":0.75},
+                {"label":"W", "x":2.25, "y":0.25},
+                {"label":"E", "x":3.25, "y":0},
+                {"label":"R", "x":4.25, "y":0.25},
+                {"label":"T", "x":5.25, "y":0.5},
+
+                {"label":"Y", "x":9, "y":0.5},
+                {"label":"U", "x":10, "y":0.25},
+                {"label":"I", "x":11, "y":0},
+                {"label":"O", "x":12, "y":0.25},
+                {"label":"P", "x":13, "y":0.75},
+                {"label":"Backspace", "x":14, "y":0.75},
+
+                {"label":"Ctrl", "x":0.25, "y":1.75},
+                {"label":"A", "x":1.25, "y":1.75},
+                {"label":"S", "x":2.25, "y":1.25},
+                {"label":"D", "x":3.25, "y":1},
+                {"label":"F", "x":4.25, "y":1.25},
+                {"label":"G", "x":5.25, "y":1.5},
+
+                {"label":"H", "x":9, "y":1.5},
+                {"label":"J", "x":10, "y":1.25},
+                {"label":"K", "x":11, "y":1},
+                {"label":"L", "x":12, "y":1.25},
+                {"label":";", "x":13, "y":1.75},
+                {"label":"'", "x":14, "y":1.75},
+
+                {"label":"Adjust", "x":0.25, "y":2.75},
+                {"label":"Z", "x":1.25, "y":2.75},
+                {"label":"X", "x":2.25, "y":2.25},
+                {"label":"C", "x":3.25, "y":2},
+                {"label":"V", "x":4.25, "y":2.25},
+                {"label":"B", "x":5.25, "y":2.5},
+
+                {"label":"N", "x":9, "y":2.5},
+                {"label":"M", "x":10, "y":2.25},
+                {"label":",", "x":11, "y":2},
+                {"label":".", "x":12, "y":2.25},
+                {"label":"/", "x":13, "y":2.75},
+                {"label":"\\", "x":14, "y":2.75},
+
+                {"label":"Shift", "x":0, "y":3.75, "w":2.25},
+                {"label":"Lower", "x":4.375, "y":3.75, "w":1.5},
+                {"label":"GUI", "x":5.875, "y":3.75, "w":1.25},
+
+                {"label":"Alt", "x":8.125, "y":3.75, "w":1.25},
+                {"label":"Raise", "x":9.375, "y":3.75, "w":1.5},
+                {"label":"Shift", "x":13, "y":3.75, "w":2.25},
+
+                {"label":"Space", "x":5.125, "y":4.75, "w":1.25},
+                {"label":"Enter", "x":8.875, "y":4.75, "w":1.25}
+            ]
+        }
+    }
+}

keyboards/arabica37/keymaps/default/config.h

@@ -0,0 +1,42 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 170
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#define OLED_FONT_H "keyboards/arabica37/lib/glcdfont.c"

keyboards/arabica37/keymaps/default/keymap.c

@@ -0,0 +1,199 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layers {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+enum custom_keycodes {
+  LOWER = SAFE_RANGE,
+  RAISE,
+  ADJUST,
+  RGBRST
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT( \
+ //,-----------------------------------------------.          ,-----------------------------------------------.
+     KC_ESC,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,              KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_BSPC,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_LCTL,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,              KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+     ADJUST,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,              KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,KC_BSLS,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_LSFT,                          LOWER,KC_LGUI,           KC_LALT,  RAISE,                        KC_RSFT,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+                                     KC_SPC,                            KC_ENT
+ //`-----------------------------------------------'          `-----------------------------------------------'
+ ),
+ [_LOWER] = LAYOUT( \
+ //,-----------------------------------------------.          ,-----------------------------------------------.
+    KC_TRNS,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,              KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_TRNS,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_TRNS,KC_HOME,KC_LEFT,  KC_UP,KC_RGHT,KC_PGUP,             KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_TRNS, KC_END,KC_PSCR,KC_DOWN, KC_INS,KC_PGDN,             KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_TRNS,                        KC_TRNS,KC_TRNS,           KC_TRNS,KC_TRNS,                        KC_TRNS,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+                                    KC_TRNS,                           KC_TRNS
+ //`-----------------------------------------------'          `-----------------------------------------------'
+ ),
+ [_RAISE] = LAYOUT( \
+ //,-----------------------------------------------.          ,-----------------------------------------------.
+    KC_TRNS,KC_EXLM,  KC_AT,KC_HASH, KC_DLR,KC_PERC,           KC_CIRC,KC_PSLS,KC_PAST,KC_PMNS,KC_PPLS,KC_TRNS,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_TRNS,KC_RBRC,KC_LABK,KC_ASTR,KC_SCLN,KC_LBRC,              KC_1,   KC_2,   KC_3,   KC_4,   KC_5, KC_EQL,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_TRNS,KC_BSLS,KC_RABK,KC_LPRN,KC_JYEN,KC_UNDS,              KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_PENT,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+--- ---+-------+-------|
+    KC_TRNS,                        KC_TRNS,KC_TRNS,           KC_TRNS,KC_TRNS,                        KC_TRNS,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+--- ---+-------+-------|
+                                    KC_TRNS,                           KC_TRNS
+ //`-----------------------------------------------'          `-----------------------------------------------'
+ ),
+ [_ADJUST] = LAYOUT( \
+ //,-----------------------------------------------.          ,-----------------------------------------------.
+    KC_TRNS, RGBRST,RGB_TOG,  KC_NO,  KC_NO,  KC_NO,             KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_TRNS,RGB_HUI,RGB_SAI,RGB_VAI,AG_SWAP,  KC_NO,             KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_TRNS,RGB_HUD,RGB_SAD,RGB_VAD,AG_NORM,  KC_NO,             KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+    KC_TRNS,                        KC_TRNS,KC_TRNS,           KC_TRNS,KC_TRNS,                        KC_TRNS,\
+ //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+                                    KC_TRNS,                           KC_TRNS
+ //`-----------------------------------------------'          `-----------------------------------------------'
+ )
+};
+
+int RGB_current_mode;
+
+void keyboard_post_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_get_mode();
+    #endif
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    // set_timelog();
+  }
+
+  switch (keycode) {
+      case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+        break;
+    case RGB_MOD:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          rgblight_mode(RGB_current_mode);
+          rgblight_step();
+          RGB_current_mode = rgblight_get_mode();
+        }
+      #endif
+      return false;
+      break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_get_mode();
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+#ifdef OLED_DRIVER_ENABLE
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    if (!is_keyboard_master()) {
+        return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+    }
+
+    return rotation;
+}
+
+void oled_task_user(void) {
+  void render_status(void) {
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR("Default\n"), false);
+            break;
+        case _LOWER:
+            oled_write_P(PSTR("LOWER\n"), false);
+            break;
+        case _RAISE:
+            oled_write_P(PSTR("RAISE\n"), false);
+            break;
+        case _ADJUST:
+            oled_write_P(PSTR("ADJUST\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+  }
+
+
+  void render_logo(void) {
+      static const char PROGMEM qmk_logo[] = {
+          0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
+          0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
+          0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
+      };
+
+      oled_write_P(qmk_logo, false);
+  }
+
+    if (is_keyboard_master()) {
+        render_status();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_logo();  // Renders a static logo
+    }
+}
+#endif

keyboards/arabica37/keymaps/default/rules.mk

@@ -0,0 +1 @@
+OLED_DRIVER_ENABLE = yes

keyboards/arabica37/lib/glcdfont.c

@@ -0,0 +1,232 @@
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#include "progmem.h"
+
+// Standard ASCII 5x7 font
+const unsigned char font[] PROGMEM = {
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+  0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+  0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+  0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+  0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+  0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+  0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+  0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+  0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+  0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+  0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+  0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+  0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+  0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+  0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+  0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+  0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+  0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+  0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+  0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+  0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+  0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+  0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+  0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+  0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+  0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+  0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+  0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+  0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+  0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+  0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+  0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+  0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+  0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+  0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+  0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+  0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+  0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+  0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+  0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+  0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+  0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+  0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+  0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+  0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+  0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+  0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+  0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+  0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+  0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+  0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+  0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+  0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+  0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+  0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+  0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+  0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+  0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+  0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+  0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+  0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+  0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+  0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+  0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+  0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+  0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+  0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+  0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+  0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+  0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+  0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+  0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+  0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+  0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+  0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+  0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+  0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+  0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+  0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+  0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+  0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+  0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+  0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+  0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+  0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+  0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+  0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+  0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+  0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+  0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+  0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+  0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+  0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+  0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+  0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+  0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+  0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+  0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+  0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+  0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+  0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+  0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0xE0, 0xF0,
+    0xF8, 0xF8, 0x00, 0xF8, 0xF8, 0xF0,
+    0xE0, 0x00, 0x00, 0x80, 0x80, 0x80,
+    0x80, 0x00, 0x00, 0x80, 0x80, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x80, 0x80,
+    0x00, 0x80, 0x80, 0x00, 0x00, 0x00,
+    0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+    0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
+    0x9C, 0x9F, 0x9F, 0x9C, 0x00, 0x00,
+    0x00, 0x00, 0x80, 0x80, 0x00, 0x80,
+    0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x80, 0x80, 0x80, 0x00, 0x80, 0x80,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
+    0x00, 0x00, 0x80, 0x80, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x80, 0x60, 0x18,
+    0x07, 0x00, 0x80, 0x80, 0x80, 0x80,
+    0x80, 0x80, 0x80, 0x80, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+  0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+  0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+  0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+  0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+  0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+  0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+  0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
+    0xFF, 0xFF, 0x20, 0xFF, 0xFF, 0xFF,
+    0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
+    0xFF, 0x00, 0x1F, 0x1F, 0x1F, 0x1F,
+    0x00, 0x00, 0xC6, 0xE7, 0xF7, 0xF7,
+    0x00, 0xFF, 0xFF, 0xFF, 0xFE, 0x00,
+    0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+    0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+    0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+    0xFE, 0xFF, 0xFF, 0xFF, 0x00, 0x9F,
+    0x9F, 0x9F, 0x9E, 0x00, 0x00, 0xE7,
+    0xF7, 0xF7, 0xF7, 0x00, 0xFF, 0xFF,
+    0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x07, 0x07,
+    0x03, 0x00, 0x7F, 0x7F, 0x3F, 0x1E,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0xC0,
+    0x30, 0x0C, 0x02, 0x01, 0x00, 0x00,
+    0x00, 0x00, 0x07, 0x07, 0x07, 0x07,
+    0x07, 0xF7, 0xF3, 0xF3, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+  0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+  0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+  0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+  0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+  0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+  0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+  0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F,
+    0x1F, 0x1F, 0x00, 0x1F, 0x1F, 0x1F,
+    0x1F, 0x00, 0x00, 0x1F, 0x1F, 0x1F,
+    0x1F, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x07, 0x0F, 0x0F, 0x1F,
+    0x00, 0x1F, 0x1F, 0x0F, 0x07, 0x00,
+    0x00, 0x07, 0x0F, 0x0F, 0x1F, 0x00,
+    0x1F, 0x1F, 0x0F, 0x07, 0x00, 0x00,
+    0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00,
+    0x07, 0x0F, 0x1F, 0x1F, 0x00, 0x1F,
+    0x0F, 0x0F, 0x07, 0x00, 0x00, 0x07,
+    0x0F, 0x1F, 0x1F, 0x00, 0x1F, 0x0F,
+    0x0F, 0x03, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xE0, 0xF0, 0xF0,
+    0xE0, 0x00, 0xFF, 0xFE, 0xFE, 0x38,
+    0x00, 0x60, 0x10, 0x0C, 0x03, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0xFF, 0xFF, 0x7F, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};

keyboards/arabica37/readme.md

@@ -0,0 +1,15 @@
+# Arabica3/7
+
+![arabica3/7](https://user-images.githubusercontent.com/46911478/76915532-9c333080-68f8-11ea-863a-8a7899d1d9c4.jpg)
+
+A split keyboard with 3x6 column staggered keys, 1 pinkey and 3 thumb keys.
+
+* Keyboard Maintainer: [CalciumNitride](https://github.com/CalciumNitride)
+* Hardware Supported: Arabica3/7 PCB, Pro Micro
+* Hardware Availability: [PCB & Case Data](https://github.com/calciumnitride/arabica37)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make arabica37/rev1:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/arabica37/rev1/config.h

@@ -0,0 +1,82 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    CalciumNitride
+#define PRODUCT         Arabica3/7
+#define DESCRIPTION     A split keyboard with 3x6 column staggered keys, 1 pinkie key and 3 thumb keys
+
+#define USE_SERIAL
+#define SOFT_SERIAL_PIN D2
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+
+// wiring of each half
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#define RGBLED_NUM 50    // Number of LEDs
+#define RGBLED_SPLIT {25, 25}
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/arabica37/rev1/rev1.c

@@ -0,0 +1 @@
+#include "arabica37.h"

keyboards/arabica37/rev1/rev1.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#include "arabica37.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
+ L26,                L31, L32,           R26, R30,                R32, \
+                       L30,                 R31                        \
+  ) \
+  { \
+    { L00, L01, L02, L03, L04, L05 }, \
+    { L10, L11, L12, L13, L14, L15 }, \
+    { L20, L21, L22, L23, L24, L25 }, \
+    { L26, KC_NO, KC_NO, L30, L31, L32 }, \
+    { R05, R04, R03, R02, R01, R00 }, \
+    { R15, R14, R13, R12, R11, R10 }, \
+    { R25, R24, R23, R22, R21, R20 }, \
+    { R32, KC_NO, KC_NO, R31, R30, R26 } \
+  }

keyboards/arabica37/rev1/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+SPLIT_KEYBOARD = yes

keyboards/ares/rules.mk

@@ -20,5 +20,3 @@ COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = no
 WS2812_DRIVER = i2c
-
-OPT_DEFS = -DDEBUG_LEVEL=0

keyboards/atreus/keymaps/xyverz/config.h

@@ -0,0 +1,4 @@
+#pragma once
+
+#undef DEBOUNCE
+#define DEBOUNCE 6

keyboards/atreus/keymaps/xyverz/keymap.c

@@ -4,8 +4,6 @@
 
 #include QMK_KEYBOARD_H
 
-extern keymap_config_t keymap_config;
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -41,6 +39,7 @@ enum planck_keycodes {
 #define ADJUST MO(_ADJUST)
 #define LOWER MO(_LOWER)
 #define RAISE MO(_RAISE)
+#define MACLOCK LGUI(LCTL(KC_Q))
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Dvorak Layer
@@ -119,13 +118,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	|------+------+------+------+------|------.,------|------+------+------+------+------|
 	|      | Left | Down | Right| End  |      ||      | PgUp | Mute | Vol- | Vol+ |      |
 	|------+------+------+------+------|      ||      |------+------+------+------+------|
-	|   ~  |      |      |      | Del  |------'`------| Ins  |      |      |      |      |
+	|   ~  |      |      |      | Del  |------'`------| Ins  |      |      |      |MACLCK|
 	`----------------------------------'              `----------------------------------'*/
   [_LOWER] = LAYOUT(
     KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
     KC_CAPS, _______, KC_UP,   _______, KC_HOME,                   KC_PGUP, _______, KC_PLUS, KC_LCBR, KC_RCBR,
     _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,                    KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______,
-    KC_TILD, _______, _______, _______, KC_DEL,  _______, _______, KC_INS,  _______, _______, _______, _______
+    KC_TILD, _______, _______, _______, KC_DEL,  _______, _______, KC_INS,  _______, _______, _______, MACLOCK
   ),
 
   /* RAISE Layer
@@ -136,13 +135,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	|------+------+------+------+------|------.,------|------+------+------+------+------|
 	|      | Left | Down | Right| End  |      ||      | PgUp | Prev | Play | Next |      |
 	|------+------+------+------+------|      ||      |------+------+------+------+------|
-	|   `  |      |      |      | Del  |------'`------| Ins  |      |      |      |      |
+	|   `  |      |      |      | Del  |------'`------| Ins  |      |      |      |MACLCK|
 	`----------------------------------'              `----------------------------------'*/
   [_RAISE] = LAYOUT(
     KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0   ,
     KC_CAPS, _______, KC_UP,   _______, KC_HOME,                   KC_PGUP, _______, KC_EQL,  KC_LBRC, KC_RBRC,
     _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,                    KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, _______,
-    KC_GRV,  _______, _______, _______, KC_DEL,  _______, _______, KC_INS,  _______, _______, _______, _______
+    KC_GRV,  _______, _______, _______, KC_DEL,  _______, _______, KC_INS,  _______, _______, _______, MACLOCK
   ),
 
   /* ADJUST Layer
@@ -190,4 +189,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       return false;
   }
   return true;
-}
+}

keyboards/atreus/keymaps/xyverz/readme.md

@@ -77,7 +77,7 @@ Control.
 	|------+------+------+------+------|------.,------|------+------+------+------+------|
 	|      | Left | Down | Right| End  |      ||      | PgUp | Mute | Vol- | Vol+ |      |
 	|------+------+------+------+------|      ||      |------+------+------+------+------|
-	|   ~  |      |      |      | Del  |------'`------| Ins  |      |      |      |      |
+	|   ~  |      |      |      | Del  |------'`------| Ins  |      |      |      |MACLCK|
 	`----------------------------------'              `----------------------------------'
 
 
@@ -90,7 +90,7 @@ Control.
 	|------+------+------+------+------|------.,------|------+------+------+------+------|
 	|      | Left | Down | Right| End  |      ||      | PgUp | Prev | Play | Next |      |
 	|------+------+------+------+------|      ||      |------+------+------+------+------|
-	|   `  |      |      |      | Del  |------'`------| Ins  |      |      |      |      |
+	|   `  |      |      |      | Del  |------'`------| Ins  |      |      |      |MACLCK|
 	`----------------------------------'              `----------------------------------'
 
 ### Layer 6: ADJUST layer

keyboards/atreus62/keymaps/scheiklp/config.h

@@ -0,0 +1,51 @@
+/* Copyright 2017 Benjamin Kesselring
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+// place overrides here
+#define AUTO_SHIFT_TIMEOUT 125
+#define NO_AUTO_SHIFT_SPECIAL
+#define NO_AUTO_SHIFT_NUMERIC
+
+// require two taps for a TT layer switch (default 5)
+#define TAPPING_TOGGLE 2
+
+// Mouse control
+// constant mode (velocity)
+#define MK_3_SPEED
+// KC_ACL0 < KC_ACL1 < unmodified < KC_ACL2
+
+// Cursor offset per movement (unmodified)
+#define MK_C_OFFSET_UNMOD 16
+// Time between cursor movements (unmodified)
+#define MK_C_INTERVAL_UNMOD 10
+/* #define MK_C_INTERVAL_UNMOD 16 */
+
+// Cursor offset per movement (KC_ACL0)
+#define MK_C_OFFSET_0 1
+// Time between cursor movements (KC_ACL0)
+#define MK_C_INTERVAL_0 32
+
+// Cursor offset per movement (KC_ACL1)
+#define MK_C_OFFSET_1 4
+// Time between cursor movements (KC_ACL1)
+#define MK_C_INTERVAL_1 16
+
+// Cursor offset per movement (KC_ACL2)
+#define MK_C_OFFSET_2 20
+/* #define MK_C_OFFSET_2 32 */
+// Time between cursor movements (KC_ACL2)
+#define MK_C_INTERVAL_2 16

keyboards/atreus62/keymaps/scheiklp/keymap.c

@@ -0,0 +1,43 @@
+#include QMK_KEYBOARD_H
+#include "koy_keys_on_quertz_de_latin1.h"
+// Layer shorthand
+#define _1 0
+#define _3 1
+#define _4 2
+#define _7 3
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_1] = LAYOUT(
+    KC_ESC,  KC_1,   KC_2,    KC_3,    KC_4,    KC_5,                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_TAB,  KC_K,   KC_DOT,  KC_O,    KC_COMM, N_Y,                         KC_V,    KC_G,    KC_C,    KC_L,    N_SS,    N_Z,
+    MO(_3),  KC_H,   KC_A,    KC_E,    KC_I,    KC_U,                        KC_D,    KC_T,    KC_R,    KC_N,    KC_S,    KC_F,
+    KC_LSFT, KC_X,   KC_Q,    N_AE,    N_UE,    N_OE,                        KC_B,    KC_P,    KC_W,    KC_M,    KC_J,    KC_RSFT,
+    KC_LCTL, N_COPY, N_PASTE, KC_LGUI, KC_LALT, KC_SPC, KC_ENTER,   KC_RCTL, MO(_3),  MO(_4),  KC_TRNS, KC_TRNS, KC_CAPS, TT(_7)
+  ),
+
+  [_3] = LAYOUT(
+    KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                      KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_BSPC,
+    KC_TAB,   N_DOTS,  N_USC,   N_LSQBR, N_RSQBR, N_CIRC,                     N_EXKL,  N_LT,    N_GT,    N_EQ,    N_AMP,   KC_TRNS,
+    KC_TRNS,  N_BSLS,  N_SLSH,  N_LCUBR, N_RCUBR, N_ASTR,                     N_QUES,  N_LPARN, N_RPARN, N_MINS,  N_COLN,  N_AT,
+    KC_LSFT,  N_HASH,  N_DLR,   N_PIPE,  N_TILD,  N_GRAVE,                    N_PLUS,  N_PERC,  N_QUOT,  N_SING,  N_SEMI,  KC_RSFT,
+    KC_LCTL,  N_COPY,  N_PASTE, KC_LGUI, KC_LALT, KC_SPC,  KC_ENTER, KC_TRNS, KC_TRNS, KC_RCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [_4] = LAYOUT(
+    KC_ESC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                    KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_BSPC,
+    KC_TAB,  KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,   KC_PGDN,                    KC_KP_SLASH,    KC_7,    KC_8,    KC_9,    KC_KP_MINUS, KC_TRNS,
+    KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_END,                     KC_KP_ASTERISK, KC_4,    KC_5,    KC_6,    KC_KP_PLUS,  KC_TRNS,
+    KC_LSFT, KC_ESC,  KC_TAB,  KC_INS,  KC_ENTER, N_UNDO,                     KC_KP_ENTER,    KC_1,    KC_2,    KC_3,    KC_KP_DOT,   KC_RSFT,
+    KC_LCTL, N_COPY,  N_PASTE, KC_LGUI, KC_LALT,  KC_0,    KC_ENTER, KC_0,    KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS
+  ),
+
+  [_7] = LAYOUT(
+    KC_ESC,  KC_TRNS,      KC_TRNS,    KC_MS_BTN3, KC_TRNS,     KC_TRNS,                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
+    KC_TAB,  KC_MS_WH_UP,  KC_MS_BTN2, KC_MS_UP,   KC_MS_BTN1,  KC_MS_WH_DOWN,                    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_MS_ACCEL0, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_TRNS,                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_LSFT, KC_MS_ACCEL1, KC_TRNS,    KC_TRNS,    KC_TRNS,     KC_TRNS,                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_LCTL, KC_MS_ACCEL2, KC_TRNS,    KC_LALT,    KC_TRNS,     KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  )
+};

keyboards/atreus62/keymaps/scheiklp/readme.md

@@ -0,0 +1,13 @@
+# KOY Layout for the atreus62 pcb board
+Compile the layout
+```bash
+qmk compile -kb atreus62 -km scheiklp
+```
+disable this service that interfers with the pro micro
+```
+sudo systemctl stop ModemManager.service
+```
+and flash it to the board
+```bash
+qmk flash -kb atreus62 -km scheiklp
+```

keyboards/atreus62/keymaps/scheiklp/rules.mk

@@ -0,0 +1,4 @@
+AUTO_SHIFT_ENABLE = yes
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = no
+NKRO_ENABLE = yes

keyboards/aves65/aves65.c

@@ -0,0 +1 @@
+#include "aves65.h"

keyboards/aves65/aves65.h

@@ -0,0 +1,19 @@
+#pragma once
+#include "quantum.h"
+
+// readability
+#define ___ KC_NO
+#define LAYOUT_65_iso_blocker( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,      k1e, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+    k40, k41, k42,                k46,                k4a, k4b, k4c, k4d, k4e  \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, ___, k1e }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e }, \
+    { k40, k41, k42, ___, ___, ___, k46, ___, ___, ___, k4a, k4b, k4c, k4d, k4e }  \
+}

keyboards/aves65/config.h

@@ -0,0 +1,61 @@
+/*
+Copyright 2019 I/O Keyboards <hello@iokeyboards.eu>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x9991
+#define PRODUCT_ID      0x9038
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    I/O Keyboards
+#define PRODUCT         Aves65
+#define DESCRIPTION     A 65% keyboard with underglow.
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {D4,D6,D7,B4,E6}
+#define MATRIX_COL_PINS {D0,D1,D2,D3,D5,B5,F0,F1,F4,F5,F6,F7,C7,C6,B6}
+#define UNUSED_PINS {B7,B1,B2,B3}
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Backlight configuration
+ */
+#define RGB_DI_PIN B0
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 9
+
+#define QMK_ESC_OUTPUT D0 // usually COL
+#define QMK_ESC_INPUT D4 // usually ROW

keyboards/aves65/info.json

@@ -0,0 +1,85 @@
+{
+    "keyboard_name": "Aves65", 
+    "url": "", 
+    "maintainer": "Hund", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_65_iso_blocker": {
+            "layout": [
+                {"label":"k00", "x":0, "y":0},
+                {"label":"k01", "x":1, "y":0},
+                {"label":"k02", "x":2, "y":0},
+                {"label":"k03", "x":3, "y":0},
+                {"label":"k04", "x":4, "y":0},
+                {"label":"k05", "x":5, "y":0},
+                {"label":"k06", "x":6, "y":0},
+                {"label":"k07", "x":7, "y":0},
+                {"label":"k08", "x":8, "y":0},
+                {"label":"k09", "x":9, "y":0},
+                {"label":"k0a", "x":10, "y":0},
+                {"label":"k0b", "x":11, "y":0},
+                {"label":"k0c", "x":12, "y":0},
+                {"label":"k0d", "x":13, "y":0, "w":2},
+                {"label":"k0e", "x":15, "y":0},
+                
+                {"label":"k10", "x":0, "y":1, "w":1.5},
+                {"label":"k11", "x":1.5, "y":1},
+                {"label":"k12", "x":2.5, "y":1},
+                {"label":"k13", "x":3.5, "y":1},
+                {"label":"k14", "x":4.5, "y":1},
+                {"label":"k15", "x":5.5, "y":1},
+                {"label":"k16", "x":6.5, "y":1},
+                {"label":"k17", "x":7.5, "y":1},
+                {"label":"k18", "x":8.5, "y":1},
+                {"label":"k19", "x":9.5, "y":1},
+                {"label":"k1a", "x":10.5, "y":1},
+                {"label":"k1b", "x":11.5, "y":1},
+                {"label":"k1c", "x":12.5, "y":1},
+                {"label":"k1e", "x":15, "y":1},
+                
+                {"label":"k20", "x":0, "y":2, "w":1.75},
+                {"label":"k21", "x":1.75, "y":2},
+                {"label":"k22", "x":2.75, "y":2},
+                {"label":"k23", "x":3.75, "y":2},
+                {"label":"k24", "x":4.75, "y":2},
+                {"label":"k25", "x":5.75, "y":2},
+                {"label":"k26", "x":6.75, "y":2},
+                {"label":"k27", "x":7.75, "y":2},
+                {"label":"k28", "x":8.75, "y":2},
+                {"label":"k29", "x":9.75, "y":2},
+                {"label":"k2a", "x":10.75, "y":2},
+                {"label":"k2b", "x":11.75, "y":2},
+                {"label":"k2c", "x":12.75, "y":2},
+                {"label":"k2d", "x":13.75, "y":1, "w":1.25, "h":2},
+                {"label":"k2e", "x":15, "y":2},
+                
+                {"label":"k30", "x":0, "y":3, "w":1.25},
+                {"label":"k31", "x":1.25, "y":3},
+                {"label":"k32", "x":2.25, "y":3},
+                {"label":"k33", "x":3.25, "y":3},
+                {"label":"k34", "x":4.25, "y":3},
+                {"label":"k35", "x":5.25, "y":3},
+                {"label":"k36", "x":6.25, "y":3},
+                {"label":"k37", "x":7.25, "y":3},
+                {"label":"k38", "x":8.25, "y":3},
+                {"label":"k39", "x":9.25, "y":3},
+                {"label":"k3a", "x":10.25, "y":3},
+                {"label":"k3b", "x":11.25, "y":3},
+                {"label":"k3c", "x":12.25, "y":3, "w":1.75},
+                {"label":"k3d", "x":14, "y":3},
+                {"label":"k3e", "x":15, "y":3},
+                
+                {"label":"k40", "x":0, "y":4, "w":1.25},
+                {"label":"k41", "x":1.25, "y":4, "w":1.25},
+                {"label":"k42", "x":2.5, "y":4, "w":1.25},
+                {"label":"k46", "x":3.75, "y":4, "w":6.25},
+                {"label":"k4a", "x":10, "y":4, "w":1.25},
+                {"label":"k4b", "x":11.25, "y":4, "w":1.25},
+                {"label":"k4c", "x":13, "y":4},
+                {"label":"k4d", "x":14, "y":4},
+                {"label":"k4e", "x":15, "y":4}
+            ]
+        }
+    }
+}

keyboards/aves65/keymaps/default/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_65_iso_blocker(
+  KC_ESC,  KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,   KC_BSPC, KC_GRV,
+  KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_DEL,
+  KC_CAPS, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_BSLS,  KC_ENT,  KC_PGUP,
+  KC_LSFT, KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,  KC_UP,   KC_PGDN,
+  KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                          KC_RALT, KC_RCTRL, KC_LEFT,  KC_DOWN, KC_RGHT)
+  
+};

keyboards/aves65/readme.md

@@ -0,0 +1,15 @@
+# Aves65
+
+![Aves65](https://i.imgur.com/H7x8an7l.jpg)
+
+A 65% hotswap keyboard with RGB underglow.
+
+* Keyboard Maintainer: [Hund](https://github.com/Hund)
+* Hardware Supported: Aves65
+* Hardware Availability: none (yet)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aves65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aves65/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = qmk-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+LAYOUTS = 65_iso_blocker

keyboards/bakeneko80/bakeneko80.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Koichi Katano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bakeneko80.h"

keyboards/bakeneko80/bakeneko80.h

@@ -0,0 +1,44 @@
+/* Copyright 2020 Koichi Katano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_tkl_ansi( \
+    k000,       k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, k016, \
+    k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, \
+    k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216, \
+    k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311,       k313,                   \
+    k400,       k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412,             k415,       \
+    k500, k501, k502,                   k506,                   k510, k511, k512, k513, k514, k515, k516  \
+) \
+{ \
+    { k000,  KC_NO, k002,  k003,  k004,  k005,  k006, k007,  k008,  k009,  k010,  k011,  k012,  k013,  k014,  k015,  k016  }, \
+    { k100,  k101,  k102,  k103,  k104,  k105,  k106, k107,  k108,  k109,  k110,  k111,  k112,  k113,  k114,  k115,  k116  }, \
+    { k200,  k201,  k202,  k203,  k204,  k205,  k206, k207,  k208,  k209,  k210,  k211,  k212,  k213,  k214,  k215,  k216  }, \
+    { k300,  k301,  k302,  k303,  k304,  k305,  k306, k307,  k308,  k309,  k310,  k311,  KC_NO, k313,  KC_NO, KC_NO, KC_NO }, \
+    { k400,  KC_NO, k402,  k403,  k404,  k405,  k406, k407,  k408,  k409,  k410,  k411,  k412,  KC_NO, KC_NO, k415,  KC_NO }, \
+    { k500,  k501,  k502,  KC_NO, KC_NO, KC_NO, k506, KC_NO, KC_NO, KC_NO, k510,  k511,  k512,  k513,  k514,  k515,  k516  }  \
+}

keyboards/bakeneko80/config.h

@@ -0,0 +1,250 @@
+/*
+Copyright 2020 Koichi Katano
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x8DEF
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Koichi Katano
+#define PRODUCT Bakeneko 80
+#define DESCRIPTION Open source tenkeyless keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { E6, B0, B1, B7, D1, D0 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/bakeneko80/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Bakeneko 80", 
+    "url": "https://github.com/kkatano/bakeneko-80-pcb", 
+    "maintainer": "Koichi Katano", 
+    "width": 18.25, 
+    "height": 6.25, 
+    "layouts": {
+        "LAYOUT_tkl_ansi": {
+            "key_count": 87,
+            "layout": [{"label":"1", "x":0, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6.5, "y":0}, {"label":"7", "x":7.5, "y":0}, {"label":"8", "x":8.5, "y":0}, {"label":"9", "x":9.5, "y":0}, {"label":"10", "x":11, "y":0}, {"label":"11", "x":12, "y":0}, {"label":"12", "x":13, "y":0}, {"label":"13", "x":14, "y":0}, {"label":"14", "x":15.25, "y":0}, {"label":"15", "x":16.25, "y":0}, {"label":"16", "x":17.25, "y":0}, {"label":"17", "x":0, "y":1.25}, {"label":"18", "x":1, "y":1.25}, {"label":"19", "x":2, "y":1.25}, {"label":"20", "x":3, "y":1.25}, {"label":"21", "x":4, "y":1.25}, {"label":"22", "x":5, "y":1.25}, {"label":"23", "x":6, "y":1.25}, {"label":"24", "x":7, "y":1.25}, {"label":"25", "x":8, "y":1.25}, {"label":"26", "x":9, "y":1.25}, {"label":"27", "x":10, "y":1.25}, {"label":"28", "x":11, "y":1.25}, {"label":"29", "x":12, "y":1.25}, {"label":"30", "x":13, "y":1.25, "w":2}, {"label":"31", "x":15.25, "y":1.25}, {"label":"32", "x":16.25, "y":1.25}, {"label":"33", "x":17.25, "y":1.25}, {"label":"34", "x":0, "y":2.25, "w":1.5}, {"label":"35", "x":1.5, "y":2.25}, {"label":"36", "x":2.5, "y":2.25}, {"label":"37", "x":3.5, "y":2.25}, {"label":"38", "x":4.5, "y":2.25}, {"label":"39", "x":5.5, "y":2.25}, {"label":"40", "x":6.5, "y":2.25}, {"label":"41", "x":7.5, "y":2.25}, {"label":"42", "x":8.5, "y":2.25}, {"label":"43", "x":9.5, "y":2.25}, {"label":"44", "x":10.5, "y":2.25}, {"label":"45", "x":11.5, "y":2.25}, {"label":"46", "x":12.5, "y":2.25}, {"label":"47", "x":13.5, "y":2.25, "w":1.5}, {"label":"48", "x":15.25, "y":2.25}, {"label":"49", "x":16.25, "y":2.25}, {"label":"50", "x":17.25, "y":2.25}, {"label":"51", "x":0, "y":3.25, "w":1.75}, {"label":"52", "x":1.75, "y":3.25}, {"label":"53", "x":2.75, "y":3.25}, {"label":"54", "x":3.75, "y":3.25}, {"label":"55", "x":4.75, "y":3.25}, {"label":"56", "x":5.75, "y":3.25}, {"label":"57", "x":6.75, "y":3.25}, {"label":"58", "x":7.75, "y":3.25}, {"label":"59", "x":8.75, "y":3.25}, {"label":"60", "x":9.75, "y":3.25}, {"label":"61", "x":10.75, "y":3.25}, {"label":"62", "x":11.75, "y":3.25}, {"label":"63", "x":12.75, "y":3.25, "w":2.25}, {"label":"64", "x":0, "y":4.25, "w":2.25}, {"label":"65", "x":2.25, "y":4.25}, {"label":"66", "x":3.25, "y":4.25}, {"label":"67", "x":4.25, "y":4.25}, {"label":"68", "x":5.25, "y":4.25}, {"label":"69", "x":6.25, "y":4.25}, {"label":"70", "x":7.25, "y":4.25}, {"label":"71", "x":8.25, "y":4.25}, {"label":"72", "x":9.25, "y":4.25}, {"label":"73", "x":10.25, "y":4.25}, {"label":"74", "x":11.25, "y":4.25}, {"label":"75", "x":12.25, "y":4.25, "w":2.75}, {"label":"76", "x":16.25, "y":4.25}, {"label":"77", "x":0, "y":5.25, "w":1.25}, {"label":"78", "x":1.25, "y":5.25, "w":1.25}, {"label":"79", "x":2.5, "y":5.25, "w":1.25}, {"label":"80", "x":3.75, "y":5.25, "w":6.25}, {"label":"81", "x":10, "y":5.25, "w":1.25}, {"label":"82", "x":11.25, "y":5.25, "w":1.25}, {"label":"83", "x":12.5, "y":5.25, "w":1.25}, {"label":"84", "x":13.75, "y":5.25, "w":1.25}, {"label":"85", "x":15.25, "y":5.25}, {"label":"86", "x":16.25, "y":5.25}, {"label":"87", "x":17.25, "y":5.25}]
+        }
+    }
+}

keyboards/bakeneko80/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2020 Koichi Katano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_tkl_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,          KC_F12,   KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,          KC_BSPC,  KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,         KC_BSLS,  KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                  KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTL,  KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_FN] = LAYOUT_tkl_ansi(
+        RESET,            KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_BRID, KC_BRIU, _______, _______, _______, _______, _______,         _______,  _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,         _______,  _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,         _______,  _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                  _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                            _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______,         _______,  _______, _______, _______
+    )
+};

keyboards/bakeneko80/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for bakeneko80

keyboards/bakeneko80/readme.md

@@ -0,0 +1,13 @@
+# Bakeneko 80
+
+Open source tenkeyless keyboard for DIYers
+
+* Keyboard Maintainer: [Koichi Katano](https://github.com/kkatano)
+* Hardware Supported: Bakeneko 80 PCB
+* Hardware Availability: [PCB](https://github.com/kkatano/bakeneko-80-pcb), [Case and Plate](https://github.com/kkatano/bakeneko-80-case)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bakeneko80:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bakeneko80/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+LAYOUTS = tkl_ansi

keyboards/basekeys/slice/rev1/config.h

@@ -28,7 +28,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key matrix size */
 #define MATRIX_ROWS 10
-#define MATRIX_COLS 18
+#define MATRIX_COLS 9
 
 // wiring of each half
 #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }

keyboards/basekeys/slice/rev1_rgb/config.h

@@ -28,7 +28,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key matrix size */
 #define MATRIX_ROWS 10
-#define MATRIX_COLS 18
+#define MATRIX_COLS 9
 
 // wiring of each half
 #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }

keyboards/bfake/rules.mk

@@ -20,5 +20,3 @@ COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = no
 WS2812_DRIVER = i2c
-
-OPT_DEFS = -DDEBUG_LEVEL=0

keyboards/chidori/keymaps/oled_sample/keymap.c

@@ -0,0 +1,217 @@
+/* Copyright 2019 ENDO Katsuhiro <ka2hiro@kagizaraya.jp>
+ * Copyright 2020 Masaya Uno
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#include "board.h"
+
+enum layer_number {
+    _QWERTY,
+    _COLEMAK,
+    _DVORAK,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    QWERTY = SAFE_RANGE,
+    COLEMAK,
+    DVORAK,
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define ADJUST MO(_ADJUST)
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Qwerty
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |             |   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |ADJUST| Esc  | Alt  | GUI  |LOWER |Space |             | Space| RAISE| Left | Down |  Up  | Right|
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+    [_QWERTY] = LAYOUT(
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,              KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+      KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,              KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,              KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, LOWER,   KC_SPC,            KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    ),
+  /* Colemak
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   Q  |   W  |   F  |   P  |   G  |             |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   R  |   S  |   T  |   D  |             |   H  |   N  |   E  |   I  |   O  |  '   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |             |   K  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |ADJUST| Esc  | Alt  | GUI  |LOWER |Space |             | Space| RAISE| Left | Down |  Up  | Right|
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+    [_COLEMAK] = LAYOUT(
+      KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,              KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+      KC_LCTL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,              KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,              KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, LOWER,   KC_SPC,            KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    ),
+
+  /* Dvorak
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   '  |   ,  |   .  |   P  |   Y  |             |   F  |   G  |   C  |   R  |   L  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   O  |   E  |   U  |   I  |             |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |             |   B  |   M  |   W  |   V  |   Z  |Enter |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |ADJUST| Esc  | Alt  | GUI  |LOWER |Space |             | Space| RAISE| Left | Down |  Up  | Right|
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+    [_DVORAK] = LAYOUT(
+      KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,              KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+      KC_LCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,              KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+      KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,              KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, LOWER,   KC_SPC,            KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    ),
+
+  /* Lower
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             |   -  |   _  |   +  |   {  |   }  |  |   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             |      |      |      | Home | End  |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             |      |      | Next | Vol- | Vol+ | Play |
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+    [_LOWER] = LAYOUT(
+      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,           KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+      _______, _______, _______, _______, _______, _______,           KC_MINS, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+      _______, _______, _______, _______, _______, _______,           _______, _______, _______, KC_HOME, KC_END,  _______,
+      _______, _______, _______, _______, _______, _______,           _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+    ),
+
+  /* Raise
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      |      |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             |      |      | Next | Vol- | Vol+ | Play |
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+    [_RAISE] = LAYOUT(
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,              KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,             KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,            KC_F12,  _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______,           _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+    ),
+
+  /* Adjust (Lower + Raise)
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |      | Reset|      |      |      |      |             |      |Qwerty|Colemk|Dvorak|      | Ins  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Caps |      |      |      |      | Mac  |             | Win  |  -   |   =  |Print |ScLock|Pause |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             |      |      |      |      |      |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             | KANA |      | Home |PageDn|PageUp| End  |
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+    [_ADJUST] = LAYOUT(
+      _______, RESET,   _______, _______, _______, _______,           _______, QWERTY,  COLEMAK, DVORAK,  _______, KC_INS,
+      KC_CAPS, _______, _______, _______, _______, AG_NORM,           AG_SWAP, KC_MINS, KC_EQL,  KC_PSCR, KC_SLCK, KC_PAUS,
+      _______, _______, _______, _______, _______, _______,           _______, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______,           _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+    )
+};
+// clang-format on
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case QWERTY:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_QWERTY);
+            }
+            return false;
+        case COLEMAK:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_COLEMAK);
+            }
+            return false;
+        case DVORAK:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_DVORAK);
+            }
+            return false;
+    }
+    return true;
+}
+
+bool led_update_user(led_t led_state) {
+    board_set_led_by_index(0, LED_YELLOW, led_state.caps_lock);
+    board_set_led_by_index(1, LED_YELLOW, led_state.scroll_lock);
+
+    return false;
+}
+
+#ifdef OLED_DRIVER_ENABLE
+
+void oled_write_layer_state(void) {
+    oled_write_P(PSTR("Layer: "), false);
+    switch (get_highest_layer(layer_state | default_layer_state)) {
+        case _QWERTY:
+            oled_write_ln_P(PSTR("Qwerty"), false);
+            break;
+        case _COLEMAK:
+            oled_write_ln_P(PSTR("Colemak"), false);
+            break;
+        case _DVORAK:
+            oled_write_ln_P(PSTR("Dvorak"), false);
+            break;
+        case _LOWER:
+            oled_write_ln_P(PSTR("Lower"), false);
+            break;
+        case _RAISE:
+            oled_write_ln_P(PSTR("Raise"), false);
+            break;
+        case _ADJUST:
+            oled_write_ln_P(PSTR("Adjust"), false);
+            break;
+        default:
+            oled_write_ln_P(PSTR("Undef"), false);
+            break;
+    }
+}
+
+void oled_task_user(void) {
+    // If you want to change the display of OLED, you need to change here
+    oled_write_layer_state();
+}
+#endif

keyboards/chidori/keymaps/oled_sample/readme.md

@@ -0,0 +1 @@
+# An OLED enabled keymap based on the default keymap for chidori

keyboards/chidori/keymaps/oled_sample/rules.mk

@@ -0,0 +1,2 @@
+# Enable SSD1306 OLED
+OLED_DRIVER_ENABLE = yes

keyboards/clawsome/bookerboard/bookerboard.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bookerboard.h"

keyboards/clawsome/bookerboard/bookerboard.h

@@ -0,0 +1,30 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02,   \
+    K10, K11, K12,   \
+    K20, K21, K22,   \
+    K30, K31, K32    \
+) { \
+    { K00,   K01,   K02   }, \
+    { K10,   K11,   K12   }, \
+    { K20,   K21,   K22   }, \
+    { K30,   K31,   K32   }, \
+}

keyboards/clawsome/bookerboard/config.h

@@ -0,0 +1,47 @@
+/*
+Copyright 2020 AAClawson (AlisGraveNil)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x41CE
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AlisGraveNil
+#define PRODUCT         Bookerboard
+#define DESCRIPTION     A 12-key QMK-powered macropod
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B5, B4, E6, D7 }
+#define MATRIX_COL_PINS { B6, B2, B3 }
+
+#define DIODE_DIRECTION COL2ROW

keyboards/clawsome/bookerboard/info.json

@@ -0,0 +1,28 @@
+{
+    "keyboard_name": "bookerboard",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 3,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 12,
+            "layout": [
+                {"label":"K00 (B5,B6)", "x":0, "y":0},
+                {"label":"K01 (B5,B2)", "x":1, "y":0},
+                {"label":"K02 (B5,B3)", "x":2, "y":0},
+                {"label":"K10 (B4,B6)", "x":0, "y":1},
+                {"label":"K11 (B4,B2)", "x":1, "y":1},
+                {"label":"K12 (B4,B3)", "x":2, "y":1},
+                {"label":"K20 (E6,B6)", "x":0, "y":2},
+                {"label":"K21 (E6,B2)", "x":1, "y":2},
+                {"label":"K22 (E6,B3)", "x":2, "y":2},
+                {"label":"K30 (D7,B6)", "x":0, "y":3},
+                {"label":"K31 (D7,B2)", "x":1, "y":3},
+                {"label":"K32 (D7,B3)", "x":2, "y":3}
+            ]
+        }
+    }
+    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
+}
+

keyboards/clawsome/bookerboard/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   /*
+    * --------------
+    * | 7 | 8 | 9 |
+    * --------------
+    * | 4 | 5 | 6 |
+    * --------------
+    * | 1 | 2 | 3 |
+    * --------------
+    * | - | 0 | = |
+    * --------------
+    */
+    [0] = LAYOUT(
+        KC_7,    KC_8,    KC_9,
+        KC_4,    KC_5,    KC_6,
+        KC_1,    KC_2,    KC_3,
+        KC_MINS, KC_0,    KC_EQL
+    ),
+
+};

keyboards/clawsome/bookerboard/readme.md

@@ -0,0 +1,13 @@
+# Bookerboard
+
+This is a 4x3 macropad designed to be used with your favorite 12 keys for whatever you need 12 extra keys for.
+
+- Keyboard Maintainer: [AAClawson](https://github.com/AlisGraveNil)
+- Hardware Supported: Bookerboard, Pro Micro, Elite-C
+- Hardware Availability: Not available yet; will be sold at a later date
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clawsome/bookerboard:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/clawsome/bookerboard/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes        # Mouse keys
+EXTRAKEY_ENABLE = yes        # Audio control and System control
+CONSOLE_ENABLE = yes         # Console for debug
+COMMAND_ENABLE = yes         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no        # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no             # USB Nkey Rollover
+BACKLIGHT_ENABLE = no        # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no         # Enable keyboard RGB underglow
+MIDI_ENABLE = no             # MIDI support
+UNICODE_ENABLE = no          # Unicode
+BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no            # Audio output on port C6
+FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no          # Enable support for HD44780 based LCDs

keyboards/clueboard/2x1800/2018/2018.c

@@ -13,7 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "2x1800.h"
+#include "2018.h"
 
 void matrix_init_kb(void) {
 	// Set our LED pins as output

keyboards/clueboard/2x1800/2018/config.h

@@ -25,7 +25,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x23A0
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Clueboard
-#define PRODUCT         Double 1800
+#define PRODUCT         2x1800 2018
 #define DESCRIPTION     What does it mean?
 
 /* key matrix size */

keyboards/clueboard/2x1800/2018/info.json

@@ -0,0 +1,42 @@
+{
+  "keyboard_name": "Clueboard 2x1800",
+  "url": "",
+  "maintainer": "skullydazed",
+  "width": 24,
+  "height": 6.5,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 127,
+      "layout": [
+        {"label":"Home", "x":0, "y":0}, {"label":"End", "x":1, "y":0}, {"label":"PgUp", "x":2, "y":0}, {"label":"PgDn", "x":3, "y":0}, {"label":"Esc", "x":4.75, "y":0}, {"label":"F1", "x":6.25, "y":0}, {"label":"F2", "x":7.25, "y":0}, {"label":"F3", "x":8.25, "y":0}, {"label":"F4", "x":9.25, "y":0}, {"label":"F5", "x":10.75, "y":0}, {"label":"F6", "x":11.75, "y":0}, {"label":"F7", "x":12.75, "y":0}, {"label":"F8", "x":13.75, "y":0}, {"label":"F9", "x":15.25, "y":0}, {"label":"F10", "x":16.25, "y":0}, {"label":"F11", "x":17.25, "y":0}, {"label":"F12", "x":18.25, "y":0}, {"label":"PrtSc", "x":20, "y":0}, {"label":"Scroll Lock", "x":21, "y":0}, {"label":"Pause", "x":22, "y":0}, {"label":"Insert", "x":23, "y":0},
+        {"label":"-", "x":0, "y":1.25}, {"label":"Num Lock", "x":1, "y":1.25}, {"label":"/", "x":2, "y":1.25}, {"label":"*", "x":3, "y":1.25}, {"label":"~", "x":4.5, "y":1.25}, {"label":"!", "x":5.5, "y":1.25}, {"label":"@", "x":6.5, "y":1.25}, {"label":"#", "x":7.5, "y":1.25}, {"label":"$", "x":8.5, "y":1.25}, {"label":"%", "x":9.5, "y":1.25}, {"label":"^", "x":10.5, "y":1.25}, {"label":"&", "x":11.5, "y":1.25}, {"label":"*", "x":12.5, "y":1.25}, {"label":"(", "x":13.5, "y":1.25}, {"label":")", "x":14.5, "y":1.25}, {"label":"_", "x":15.5, "y":1.25}, {"label":"+", "x":16.5, "y":1.25}, {"label":"Backspace", "x":17.5, "y":1.25, "w":2}, {"label":"Num Lock", "x":20, "y":1.25}, {"label":"/", "x":21, "y":1.25}, {"label":"*", "x":22, "y":1.25}, {"label":"-", "x":23, "y":1.25},
+        {"label":"+", "x":0, "y":2.25, "h":2}, {"label":"7", "x":1, "y":2.25}, {"label":"8", "x":2, "y":2.25}, {"label":"9", "x":3, "y":2.25}, {"label":"Tab", "x":4.5, "y":2.25, "w":1.5}, {"label":"Q", "x":6, "y":2.25}, {"label":"W", "x":7, "y":2.25}, {"label":"E", "x":8, "y":2.25}, {"label":"R", "x":9, "y":2.25}, {"label":"T", "x":10, "y":2.25}, {"label":"Y", "x":11, "y":2.25}, {"label":"U", "x":12, "y":2.25}, {"label":"I", "x":13, "y":2.25}, {"label":"O", "x":14, "y":2.25}, {"label":"P", "x":15, "y":2.25}, {"label":"{", "x":16, "y":2.25}, {"label":"}", "x":17, "y":2.25}, {"label":"|", "x":18, "y":2.25, "w":1.5}, {"label":"7", "x":20, "y":2.25}, {"label":"8", "x":21, "y":2.25}, {"label":"9", "x":22, "y":2.25}, {"label":"+", "x":23, "y":2.25, "h":2},
+        {"label":"4", "x":1, "y":3.25}, {"label":"5", "x":2, "y":3.25}, {"label":"6", "x":3, "y":3.25}, {"label":"Caps Lock", "x":4.5, "y":3.25, "w":1.75}, {"label":"A", "x":6.25, "y":3.25}, {"label":"S", "x":7.25, "y":3.25}, {"label":"D", "x":8.25, "y":3.25}, {"label":"F", "x":9.25, "y":3.25}, {"label":"G", "x":10.25, "y":3.25}, {"label":"H", "x":11.25, "y":3.25}, {"label":"J", "x":12.25, "y":3.25}, {"label":"K", "x":13.25, "y":3.25}, {"label":"L", "x":14.25, "y":3.25}, {"label":":", "x":15.25, "y":3.25}, {"label":"\"", "x":16.25, "y":3.25}, {"label":"Enter", "x":17.25, "y":3.25, "w":2.25}, {"label":"4", "x":20, "y":3.25}, {"label":"5", "x":21, "y":3.25}, {"label":"6", "x":22, "y":3.25},
+        {"label":"Enter", "x":0, "y":4.25, "h":2}, {"label":"1", "x":1, "y":4.25}, {"label":"2", "x":2, "y":4.25}, {"label":"3", "x":3, "y":4.25}, {"label":"\\u2191", "x":4.25, "y":4.5}, {"label":"Shift", "x":5.5, "y":4.25, "w":1.25}, {"label":"Z", "x":6.75, "y":4.25}, {"label":"X", "x":7.75, "y":4.25}, {"label":"C", "x":8.75, "y":4.25}, {"label":"V", "x":9.75, "y":4.25}, {"label":"B", "x":10.75, "y":4.25}, {"label":"N", "x":11.75, "y":4.25}, {"label":"M", "x":12.75, "y":4.25}, {"label":"<", "x":13.75, "y":4.25}, {"label":">", "x":14.75, "y":4.25}, {"label":"?", "x":15.75, "y":4.25}, {"label":"Shift", "x":16.75, "y":4.25, "w":1.75}, {"label":"\\u2191", "x":18.75, "y":4.5}, {"label":"1", "x":20, "y":4.25}, {"label":"2", "x":21, "y":4.25}, {"label":"3", "x":22, "y":4.25}, {"label":"Enter", "x":23, "y":4.25, "h":2},
+        {"label":"0", "x":1, "y":5.25}, {"label":".", "x":2, "y":5.25}, {"label":"\\u2190", "x":3.25, "y":5.5}, {"label":"\\u2193", "x":4.25, "y":5.5}, {"label":"\\u2192", "x":5.25, "y":5.5}, {"label":"Ctrl", "x":6.5, "y":5.25}, {"label":"Win", "x":7.5, "y":5.25}, {"label":"Alt", "x":8.5, "y":5.25}, {"label":"1u", "x":9.5, "y":5.25}, {"label":"1u", "x":10.5, "y":5.25}, {"label":"1u", "x":11.5, "y":5.25}, {"label":"1u", "x":12.5, "y":5.25}, {"label":"Alt", "x":13.5, "y":5.25}, {"label":"Win", "x":14.5, "y":5.25}, {"label":"Menu", "x":15.5, "y":5.25}, {"label":"Ctrl", "x":16.5, "y":5.25}, {"label":"\\u2190", "x":17.75, "y":5.5}, {"label":"\\u2193", "x":18.75, "y":5.5}, {"label":"\\u2192", "x":19.75, "y":5.5}, {"label":"0", "x":21, "y":5.25}, {"label":".", "x":22, "y":5.25}
+      ]
+    },
+    "LAYOUT_7u_space": {
+      "key_count": 121,
+      "layout": [
+        {"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4.75, "y":0}, {"label":"k06", "x":6.25, "y":0}, {"label":"k07", "x":7.25, "y":0}, {"label":"k08", "x":8.25, "y":0}, {"label":"k09", "x":9.25, "y":0}, {"label":"k0a", "x":10.75, "y":0}, {"label":"k60", "x":11.75, "y":0}, {"label":"k61", "x":12.75, "y":0}, {"label":"k62", "x":13.75, "y":0}, {"label":"k63", "x":15.25, "y":0}, {"label":"k64", "x":16.25, "y":0}, {"label":"k65", "x":17.25, "y":0}, {"label":"k66", "x":18.25, "y":0}, {"label":"k67", "x":20, "y":0}, {"label":"k68", "x":21, "y":0}, {"label":"k69", "x":22, "y":0}, {"label":"k6a", "x":23, "y":0},
+        {"label":"k10", "x":0, "y":1.25}, {"label":"k11", "x":1, "y":1.25}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1.25}, {"label":"k14", "x":4.5, "y":1.25}, {"label":"k15", "x":5.5, "y":1.25}, {"label":"k16", "x":6.5, "y":1.25}, {"label":"k17", "x":7.5, "y":1.25}, {"label":"k18", "x":8.5, "y":1.25}, {"label":"k19", "x":9.5, "y":1.25}, {"label":"k0a", "x":10.5, "y":1.25}, {"label":"k70", "x":11.5, "y":1.25}, {"label":"k71", "x":12.5, "y":1.25}, {"label":"k72", "x":13.5, "y":1.25}, {"label":"k73", "x":14.5, "y":1.25}, {"label":"k74", "x":15.5, "y":1.25}, {"label":"k75", "x":16.5, "y":1.25}, {"label":"k76", "x":17.5, "y":1.25, "w":2}, {"label":"k77", "x":20, "y":1.25}, {"label":"k78", "x":21, "y":1.25}, {"label":"k79", "x":22, "y":1.25}, {"label":"k7a", "x":23, "y":1.25},
+        {"label":"k20", "x":0, "y":2.25, "h":2}, {"label":"k21", "x":1, "y":2.25}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2.25}, {"label":"k24", "x":4.5, "y":2.25, "w":1.5}, {"label":"k25", "x":6, "y":2.25}, {"label":"k26", "x":7, "y":2.25}, {"label":"k27", "x":8, "y":2.25}, {"label":"k28", "x":9, "y":2.25}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2a", "x":11, "y":2.25}, {"label":"k80", "x":12, "y":2.25}, {"label":"k81", "x":13, "y":2.25}, {"label":"k82", "x":14, "y":2.25}, {"label":"k83", "x":15, "y":2.25}, {"label":"k84", "x":16, "y":2.25}, {"label":"k85", "x":17, "y":2.25}, {"label":"k86", "x":18, "y":2.25, "w":1.5}, {"label":"k87", "x":20, "y":2.25}, {"label":"k88", "x":21, "y":2.25}, {"label":"k89", "x":22, "y":2.25}, {"label":"k8a", "x":23, "y":2.25, "h":2},
+        {"label":"k31", "x":1, "y":3.25}, {"label":"k32", "x":2, "y":3.25}, {"label":"k33", "x":3, "y":3.25}, {"label":"k34", "x":4.5, "y":3.25, "w":1.75}, {"label":"k35", "x":6.25, "y":3.25}, {"label":"k36", "x":7.25, "y":3.25}, {"label":"k37", "x":8.25, "y":3.25}, {"label":"k38", "x":9.25, "y":3.25}, {"label":"k39", "x":10.25, "y":3.25}, {"label":"k3a", "x":11.25, "y":3.25}, {"label":"k90", "x":12.25, "y":3.25}, {"label":"k91", "x":13.25, "y":3.25}, {"label":"k92", "x":14.25, "y":3.25}, {"label":"k93", "x":15.25, "y":3.25}, {"label":"k94", "x":16.25, "y":3.25}, {"label":"k95", "x":17.25, "y":3.25, "w":2.25}, {"label":"k97", "x":20, "y":3.25}, {"label":"k98", "x":21, "y":3.25}, {"label":"k99", "x":22, "y":3.25},
+        {"label":"k40", "x":0, "y":4.25, "h":2}, {"label":"k41", "x":1, "y":4.25}, {"label":"k42", "x":2, "y":4.25}, {"label":"k43", "x":3, "y":4.25}, {"label":"k45", "x":5.5, "y":4.25, "w":1.25}, {"label":"k46", "x":6.75, "y":4.25}, {"label":"k47", "x":7.75, "y":4.25}, {"label":"k48", "x":8.75, "y":4.25}, {"label":"k49", "x":9.75, "y":4.25}, {"label":"k4a", "x":10.75, "y":4.25}, {"label":"ka0", "x":11.75, "y":4.25}, {"label":"ka1", "x":12.75, "y":4.25}, {"label":"ka2", "x":13.75, "y":4.25}, {"label":"ka3", "x":14.75, "y":4.25}, {"label":"ka4", "x":15.75, "y":4.25}, {"label":"ka5", "x":16.75, "y":4.25, "w":1.75}, {"label":"ka7", "x":20, "y":4.25}, {"label":"ka8", "x":21, "y":4.25}, {"label":"ka9", "x":22, "y":4.25}, {"label":"kaa", "x":23, "y":4.25, "h":2}, {"label":"k44", "x":4.25, "y":4.5}, {"label":"k96", "x":18.75, "y":4.5},
+        {"label":"k51", "x":1, "y":5.25}, {"label":"k52", "x":2, "y":5.25}, {"label":"k56", "x":6.5, "y":5.25}, {"label":"k57", "x":7.5, "y":5.25}, {"label":"kb0", "x":8.5, "y":5.25, "w":7}, {"label":"kb4", "x":15.5, "y":5.25}, {"label":"kb5", "x":16.5, "y":5.25}, {"label":"kb8", "x":21, "y":5.25}, {"label":"kb9", "x":22, "y":5.25}, {"label":"k53", "x":3.25, "y":5.5}, {"label":"k54", "x":4.25, "y":5.5}, {"label":"k55", "x":5.25, "y":5.5}, {"label":"ka6", "x":17.75, "y":5.5}, {"label":"kb6", "x":18.75, "y":5.5}, {"label":"kb7", "x":19.75, "y":5.5}
+      ]
+    },
+    "LAYOUT_4u_space": {
+      "key_count": 124,
+      "layout": [
+        {"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4.75, "y":0}, {"label":"k06", "x":6.25, "y":0}, {"label":"k07", "x":7.25, "y":0}, {"label":"k08", "x":8.25, "y":0}, {"label":"k09", "x":9.25, "y":0}, {"label":"k0a", "x":10.75, "y":0}, {"label":"k60", "x":11.75, "y":0}, {"label":"k61", "x":12.75, "y":0}, {"label":"k62", "x":13.75, "y":0}, {"label":"k63", "x":15.25, "y":0}, {"label":"k64", "x":16.25, "y":0}, {"label":"k65", "x":17.25, "y":0}, {"label":"k66", "x":18.25, "y":0}, {"label":"k67", "x":20, "y":0}, {"label":"k68", "x":21, "y":0}, {"label":"k69", "x":22, "y":0}, {"label":"k6a", "x":23, "y":0},
+        {"label":"k10", "x":0, "y":1.25}, {"label":"k11", "x":1, "y":1.25}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1.25}, {"label":"k14", "x":4.5, "y":1.25}, {"label":"k15", "x":5.5, "y":1.25}, {"label":"k16", "x":6.5, "y":1.25}, {"label":"k17", "x":7.5, "y":1.25}, {"label":"k18", "x":8.5, "y":1.25}, {"label":"k19", "x":9.5, "y":1.25}, {"label":"k0a", "x":10.5, "y":1.25}, {"label":"k70", "x":11.5, "y":1.25}, {"label":"k71", "x":12.5, "y":1.25}, {"label":"k72", "x":13.5, "y":1.25}, {"label":"k73", "x":14.5, "y":1.25}, {"label":"k74", "x":15.5, "y":1.25}, {"label":"k75", "x":16.5, "y":1.25}, {"label":"k76", "x":17.5, "y":1.25, "w":2}, {"label":"k77", "x":20, "y":1.25}, {"label":"k78", "x":21, "y":1.25}, {"label":"k79", "x":22, "y":1.25}, {"label":"k7a", "x":23, "y":1.25},
+        {"label":"k20", "x":0, "y":2.25, "h":2}, {"label":"k21", "x":1, "y":2.25}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2.25}, {"label":"k24", "x":4.5, "y":2.25, "w":1.5}, {"label":"k25", "x":6, "y":2.25}, {"label":"k26", "x":7, "y":2.25}, {"label":"k27", "x":8, "y":2.25}, {"label":"k28", "x":9, "y":2.25}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2a", "x":11, "y":2.25}, {"label":"k80", "x":12, "y":2.25}, {"label":"k81", "x":13, "y":2.25}, {"label":"k82", "x":14, "y":2.25}, {"label":"k83", "x":15, "y":2.25}, {"label":"k84", "x":16, "y":2.25}, {"label":"k85", "x":17, "y":2.25}, {"label":"k86", "x":18, "y":2.25, "w":1.5}, {"label":"k87", "x":20, "y":2.25}, {"label":"k88", "x":21, "y":2.25}, {"label":"k89", "x":22, "y":2.25}, {"label":"k8a", "x":23, "y":2.25, "h":2},
+        {"label":"k31", "x":1, "y":3.25}, {"label":"k32", "x":2, "y":3.25}, {"label":"k33", "x":3, "y":3.25}, {"label":"k34", "x":4.5, "y":3.25, "w":1.75}, {"label":"k35", "x":6.25, "y":3.25}, {"label":"k36", "x":7.25, "y":3.25}, {"label":"k37", "x":8.25, "y":3.25}, {"label":"k38", "x":9.25, "y":3.25}, {"label":"k39", "x":10.25, "y":3.25}, {"label":"k3a", "x":11.25, "y":3.25}, {"label":"k90", "x":12.25, "y":3.25}, {"label":"k91", "x":13.25, "y":3.25}, {"label":"k92", "x":14.25, "y":3.25}, {"label":"k93", "x":15.25, "y":3.25}, {"label":"k94", "x":16.25, "y":3.25}, {"label":"k95", "x":17.25, "y":3.25, "w":2.25}, {"label":"k97", "x":20, "y":3.25}, {"label":"k98", "x":21, "y":3.25}, {"label":"k99", "x":22, "y":3.25},
+        {"label":"k40", "x":0, "y":4.25, "h":2}, {"label":"k41", "x":1, "y":4.25}, {"label":"k42", "x":2, "y":4.25}, {"label":"k43", "x":3, "y":4.25}, {"label":"k45", "x":5.5, "y":4.25, "w":1.25}, {"label":"k46", "x":6.75, "y":4.25}, {"label":"k47", "x":7.75, "y":4.25}, {"label":"k48", "x":8.75, "y":4.25}, {"label":"k49", "x":9.75, "y":4.25}, {"label":"k4a", "x":10.75, "y":4.25}, {"label":"ka0", "x":11.75, "y":4.25}, {"label":"ka1", "x":12.75, "y":4.25}, {"label":"ka2", "x":13.75, "y":4.25}, {"label":"ka3", "x":14.75, "y":4.25}, {"label":"ka4", "x":15.75, "y":4.25}, {"label":"ka5", "x":16.75, "y":4.25, "w":1.75}, {"label":"ka7", "x":20, "y":4.25}, {"label":"ka8", "x":21, "y":4.25}, {"label":"ka9", "x":22, "y":4.25}, {"label":"kaa", "x":23, "y":4.25, "h":2}, {"label":"k44", "x":4.25, "y":4.5}, {"label":"k96", "x":18.75, "y":4.5},
+        {"label":"k51", "x":1, "y":5.25}, {"label":"k52", "x":2, "y":5.25}, {"label":"k56", "x":6.5, "y":5.25}, {"label":"k57", "x":7.5, "y":5.25}, {"label":"k58", "x":8.5, "y":5.25}, {"label":"kb0", "x":9.5, "y":5.25, "w":4}, {"label":"kb2", "x":13.5, "y":5.25}, {"label":"kb3", "x":14.5, "y":5.25}, {"label":"kb4", "x":15.5, "y":5.25}, {"label":"kb5", "x":16.5, "y":5.25}, {"label":"kb8", "x":21, "y":5.25}, {"label":"kb9", "x":22, "y":5.25}, {"label":"k53", "x":3.25, "y":5.5}, {"label":"k54", "x":4.25, "y":5.5}, {"label":"k55", "x":5.25, "y":5.5}, {"label":"ka6", "x":17.75, "y":5.5}, {"label":"kb6", "x":18.75, "y":5.5}, {"label":"kb7", "x":19.75, "y":5.5}
+      ]
+    }
+  }
+}

keyboards/clueboard/2x1800/2018/keymaps/default/keymap.json

@@ -0,0 +1,11 @@
+{
+    "keyboard":"clueboard/2x1800/2018",
+    "keymap":"default",
+    "layout":"LAYOUT",
+    "layers":[
+        ["KC_HOME","KC_END","KC_PGUP","KC_PGDN","KC_ESC","KC_F1","KC_F2","KC_F3","KC_F4","KC_F5","KC_F6","KC_F7","KC_F8","KC_F9","KC_F10","KC_F11","KC_F12","KC_PSCR","KC_SLCK","KC_PAUS","KC_INS","KC_PMNS","KC_NLCK","KC_PSLS","KC_PAST","KC_GRV","KC_1","KC_2","KC_3","KC_4","KC_5","KC_6","KC_7","KC_8","KC_9","KC_0","KC_MINS","KC_EQL","KC_BSPC","KC_NLCK","KC_PSLS","KC_PAST","KC_PMNS","KC_PPLS","KC_P7","KC_P8","KC_P9","KC_TAB","KC_Q","KC_W","KC_E","KC_R","KC_T","KC_Y","KC_U","KC_I","KC_O","KC_P","KC_LBRC","KC_RBRC","KC_BSLS","KC_P7","KC_P8","KC_P9","KC_PSLS","KC_P4","KC_P5","KC_P6","KC_CAPS","KC_A","KC_S","KC_D","KC_F","KC_G","KC_H","KC_J","KC_K","KC_L","KC_SCLN","KC_QUOT","KC_ENT","KC_P4","KC_P5","KC_P6","KC_PENT","KC_P1","KC_P2","KC_P3","KC_UP","KC_LSFT","KC_Z","KC_X","KC_C","KC_V","KC_B","KC_N","KC_M","KC_SLSH","KC_COMM","KC_DOT","KC_RSFT","KC_UP","KC_P1","KC_P2","KC_P3","KC_PENT","KC_P0","KC_PDOT","KC_LEFT","KC_DOWN","KC_RGHT","KC_LCTL","KC_LGUI","KC_LALT","KC_SPC","KC_SPC","KC_SPC","KC_SPC","KC_RALT","KC_RGUI","KC_APP","KC_RCTL","KC_LEFT","KC_DOWN","KC_RGHT","KC_P0","KC_PDOT"]
+    ],
+    "author":"skullydazed",
+    "notes":"",
+    "version":1
+}

keyboards/clueboard/2x1800/2018/keymaps/default_4u/keymap.c

@@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_PMNS, KC_NLCK, KC_PSLS, KC_PAST,      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,     KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
       KC_PPLS, KC_P7,   KC_P8,   KC_P9,        KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC, KC_BSLS,       KC_P7, KC_P8, KC_P9, KC_PSLS,       \
                KC_P4,   KC_P5,   KC_P6,        KC_CAPS,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,    KC_QUOT, KC_ENT,         KC_P4, KC_P5, KC_P6,                \
-      KC_PENT, KC_P1,   KC_P2,   KC_P3,     KC_UP,  KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_SLSH, KC_COMM, KC_DOT,   KC_RSFT,      KC_UP,      KC_P1, KC_P2, KC_P3, KC_PENT,       \
+      KC_PENT, KC_P1,   KC_P2,   KC_P3,     KC_UP,  KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM, KC_DOT, KC_SLSH,   KC_RSFT,      KC_UP,      KC_P1, KC_P2, KC_P3, KC_PENT,       \
                KC_P0,   KC_PDOT,  KC_LEFT, KC_DOWN, KC_RGHT,  KC_LCTL, KC_LGUI, KC_LALT,                 KC_SPC,         KC_RALT, KC_RGUI, KC_APP, KC_RCTL,  KC_LEFT, KC_DOWN, KC_RGHT,  KC_P0, KC_PDOT               \
 )
 };