Update Belgian keymap and sendstring LUT (#8349)

* ortho 4x12 jotix layout

* jotix ortho_4x12 layout

build_json.mk

@@ -23,4 +23,4 @@ endif
 
 # Generate the keymap.c
 $(KEYBOARD_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)
-	bin/qmk json-keymap --quiet --output $(KEYMAP_C) $(KEYMAP_JSON)
+	bin/qmk json2c --quiet --output $(KEYMAP_C) $(KEYMAP_JSON)

common_features.mk

@@ -141,6 +141,10 @@ else
         SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
         OPT_DEFS += -DEEPROM_EMU_STM32F072xB
         OPT_DEFS += -DSTM32_EEPROM_ENABLE
+      else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),)
+        OPT_DEFS += -DEEPROM_DRIVER
+        COMMON_VPATH += $(DRIVER_PATH)/eeprom
+        SRC += eeprom_driver.c eeprom_stm32_L0_L1.c
       else
         # This will effectively work the same as "transient" if not supported by the chip
         SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
@@ -159,7 +163,6 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/color.c
     SRC += $(QUANTUM_DIR)/rgblight.c
     CIE1931_CURVE := yes
-    LED_BREATHING_TABLE := yes
     RGB_KEYCODES_ENABLE := yes
     ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
@@ -298,24 +301,27 @@ VALID_BACKLIGHT_TYPES := pwm software custom
 BACKLIGHT_ENABLE ?= no
 BACKLIGHT_DRIVER ?= pwm
 ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
-    SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
     ifeq ($(filter $(BACKLIGHT_DRIVER),$(VALID_BACKLIGHT_TYPES)),)
         $(error BACKLIGHT_DRIVER="$(BACKLIGHT_DRIVER)" is not a valid backlight type)
     endif
 
     COMMON_VPATH += $(QUANTUM_DIR)/backlight
     SRC += $(QUANTUM_DIR)/backlight/backlight.c
+    SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
     OPT_DEFS += -DBACKLIGHT_ENABLE
 
     ifeq ($(strip $(BACKLIGHT_DRIVER)), custom)
         OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
-    else ifeq ($(strip $(BACKLIGHT_DRIVER)), software)
-        SRC += $(QUANTUM_DIR)/backlight/backlight_soft.c
     else
-        ifeq ($(PLATFORM),AVR)
-            SRC += $(QUANTUM_DIR)/backlight/backlight_avr.c
+        SRC += $(QUANTUM_DIR)/backlight/backlight_driver_common.c
+        ifeq ($(strip $(BACKLIGHT_DRIVER)), pwm)
+            ifeq ($(PLATFORM),AVR)
+                SRC += $(QUANTUM_DIR)/backlight/backlight_avr.c
+            else
+                SRC += $(QUANTUM_DIR)/backlight/backlight_arm.c
+            endif
         else
-            SRC += $(QUANTUM_DIR)/backlight/backlight_arm.c
+            SRC += $(QUANTUM_DIR)/backlight/backlight_$(strip $(BACKLIGHT_DRIVER)).c
         endif
     endif
 endif
@@ -351,11 +357,6 @@ ifeq ($(strip $(CIE1931_CURVE)), yes)
     LED_TABLES := yes
 endif
 
-ifeq ($(strip $(LED_BREATHING_TABLE)), yes)
-    OPT_DEFS += -DUSE_LED_BREATHING_TABLE
-    LED_TABLES := yes
-endif
-
 ifeq ($(strip $(LED_TABLES)), yes)
     SRC += $(QUANTUM_DIR)/led_tables.c
 endif

docs/_summary.md

@@ -18,7 +18,6 @@
   * [Overview](newbs_building_firmware_configurator.md)
   * [Step by Step](configurator_step_by_step.md)
   * [Troubleshooting](configurator_troubleshooting.md)
-  * [Problems and Bugs](configurator_problems.md)
   * QMK API
     * [Overview](api_overview.md)
     * [API Documentation](api_docs.md)
@@ -128,7 +127,6 @@
   * Python Development
     * [Coding Conventions](coding_conventions_python.md)
     * [QMK CLI Development](cli_development.md)
-    * [QMK CLI Config](cli_dev_configuration.md)
 
   * Configurator Development
     * QMK API

docs/adc_driver.md

@@ -2,7 +2,7 @@
 
 QMK can leverage the Analog-to-Digital Converter (ADC) on supported MCUs to measure voltages on certain pins. This can be useful for implementing things such as battery level indicators for Bluetooth keyboards, or volume controls using a potentiometer, as opposed to a [rotary encoder](feature_encoders.md).
 
-This driver is currently AVR-only. The values returned are 10-bit integers (0-1023) mapped between 0V and VCC (usually 5V or 3.3V).
+This driver currently supports both AVR and a limited selection of ARM devices. On AVR devices, the values returned are 10-bit integers (0-1023) mapped between 0V and VCC (usually 5V or 3.3V). On supported ARM devices, there is more flexibility in control of operation through `#define`s, but by default the values returned are 12-bit integers (0-4095) mapped between 0V and VCC (usually 3.3V).
 
 ## Usage
 
@@ -20,6 +20,8 @@ Then place this include at the top of your code:
 
 ## Channels
 
+### AVR
+
 |Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328P|
 |-------|-------------|-------------|---------|----------|
 |0      |`F0`         |`F0`         |`A0`     |`C0`      |
@@ -39,8 +41,84 @@ Then place this include at the top of your code:
 
 <sup>\* The ATmega328P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these.</sup>
 
+### ARM
+
+Note that some of these pins are doubled-up on ADCs with the same channel. This is because the pins can be used for either ADC.
+
+Also note that the F0 and F3 use different numbering schemes. The F0 has a single ADC and the channels are 0-based, whereas the F3 has 4 ADCs and the channels are 1 based. This is because the F0 uses the `ADCv1` implementation of the ADC, whereas the F3 uses the `ADCv3` implementation.
+
+|ADC|Channel|STM32F0XX|STM32F3XX|
+|---|-------|---------|---------|
+|1  |0      |`A0`     |         |
+|1  |1      |`A1`     |`A0`     |
+|1  |2      |`A2`     |`A1`     |
+|1  |3      |`A3`     |`A2`     |
+|1  |4      |`A4`     |`A3`     |
+|1  |5      |`A5`     |`F4`     |
+|1  |6      |`A6`     |`C0`     |
+|1  |7      |`A7`     |`C1`     |
+|1  |8      |`B0`     |`C2`     |
+|1  |9      |`B1`     |`C3`     |
+|1  |10     |`C0`     |`F2`     |
+|1  |11     |`C1`     |         |
+|1  |12     |`C2`     |         |
+|1  |13     |`C3`     |         |
+|1  |14     |`C4`     |         |
+|1  |15     |`C5`     |         |
+|1  |16     |         |         |
+|2  |1      |         |`A4`     |
+|2  |2      |         |`A5`     |
+|2  |3      |         |`A6`     |
+|2  |4      |         |`A7`     |
+|2  |5      |         |`C4`     |
+|2  |6      |         |`C0`     |
+|2  |7      |         |`C1`     |
+|2  |8      |         |`C2`     |
+|2  |9      |         |`C3`     |
+|2  |10     |         |`F2`     |
+|2  |11     |         |`C5`     |
+|2  |12     |         |`B2`     |
+|2  |13     |         |         |
+|2  |14     |         |         |
+|2  |15     |         |         |
+|2  |16     |         |         |
+|3  |1      |         |`B1`     |
+|3  |2      |         |`E9`     |
+|3  |3      |         |`E13`    |
+|3  |4      |         |         |
+|3  |5      |         |         |
+|3  |6      |         |`E8`     |
+|3  |7      |         |`D10`    |
+|3  |8      |         |`D11`    |
+|3  |9      |         |`D12`    |
+|3  |10     |         |`D13`    |
+|3  |11     |         |`D14`    |
+|3  |12     |         |`B0`     |
+|3  |13     |         |`E7`     |
+|3  |14     |         |`E10`    |
+|3  |15     |         |`E11`    |
+|3  |16     |         |`E12`    |
+|4  |1      |         |`E14`    |
+|4  |2      |         |`B12`    |
+|4  |3      |         |`B13`    |
+|4  |4      |         |`B14`    |
+|4  |5      |         |`B15`    |
+|4  |6      |         |`E8`     |
+|4  |7      |         |`D10`    |
+|4  |8      |         |`D11`    |
+|4  |9      |         |`D12`    |
+|4  |10     |         |`D13`    |
+|4  |11     |         |`D14`    |
+|4  |12     |         |`D8`     |
+|4  |13     |         |`D9`     |
+|4  |14     |         |         |
+|4  |15     |         |         |
+|4  |16     |         |         |
+
 ## Functions
 
+### AVR
+
 |Function                    |Description                                                                                                        |
 |----------------------------|-------------------------------------------------------------------------------------------------------------------|
 |`analogReference(mode)`     |Sets the analog voltage reference source. Must be one of `ADC_REF_EXTERNAL`, `ADC_REF_POWER` or `ADC_REF_INTERNAL`.|
@@ -48,3 +126,28 @@ Then place this include at the top of your code:
 |`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `F6` for ADC6 on the ATmega32U4.                                   |
 |`pinToMux(pin)`             |Translates a given QMK pin to a mux value. If an unsupported pin is given, returns the mux value for "0V (GND)".   |
 |`adc_read(mux)`             |Reads the value from the ADC according to the specified mux. See your MCU's datasheet for more information.        |
+
+### ARM
+
+Note that care was taken to match all of the functions used for AVR devices, however complications in the ARM platform prevent that from always being possible. For example, the `STM32` chips do not have assigned Arduino pins. We could use the default pin numbers, but those numbers change based on the package type of the device. For this reason, please specify your target pins with their identifiers (`A0`, `F3`, etc.). Also note that there are some variants of functions that accept the target ADC for the pin. Some pins can be used for multiple ADCs, and this specified can help you pick which ADC will be used to interact with that pin.
+
+|Function                    |Description                                                                                                         |
+|----------------------------|--------------------------------------------------------------------------------------------------------------------|
+|`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `A0` for channel 0 on the STM32F0 and ADC1 channel 1 on the STM32F3. Note that if a pin can be used for multiple ADCs, it will pick the lower numbered ADC for this function. eg. `C0` will be channel 6 of ADC 1 when it could be used for ADC 2 as well.|
+|`analogReadPinAdc(pin, adc)`|Reads the value from the specified QMK pin and ADC, eg. `C0, 1` will read from channel 6, ADC 2 instead of ADC 1. Note that the ADCs are 0-indexed for this function.|
+|`pinToMux(pin)`             |Translates a given QMK pin to a channel and ADC combination. If an unsupported pin is given, returns the mux value for "0V (GND)".|
+|`adc_read(mux)`             |Reads the value from the ADC according to the specified pin and adc combination. See your MCU's datasheet for more information.|
+
+## Configuration
+
+## ARM
+
+The ARM implementation of the ADC has a few additional options that you can override in your own keyboards and keymaps to change how it operates.
+
+|`#define`          |Type  |Default              |Description|
+|-------------------|------|---------------------|-----------|
+|ADC_CIRCULAR_BUFFER|`bool`|`false`              |If `TRUE`, then the implementation will use a circular buffer.|
+|ADC_NUM_CHANNELS   |`int` |`1`                  |Sets the number of channels that will be scanned as part of an ADC operation. The current implementation only supports `1`.|
+|ADC_BUFFER_DEPTH   |`int` |`2`                  |Sets the depth of each result. Since we are only getting a 12-bit result by default, we set this to `2` bytes so we can contain our one value. This could be set to 1 if you opt for a 8-bit or lower result.|
+|ADC_SAMPLING_RATE  |`int` |`ADC_SMPR_SMP_1P5`   |Sets the sampling rate of the ADC. By default, it is set to the fastest setting. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|
+|ADC_RESOLUTION     |`int` |`ADC_CFGR1_RES_12BIT`|The resolution of your result. We choose 12 bit by default, but you can opt for 12, 10, 8, or 6 bit. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|

docs/cli.md

@@ -1,24 +1,14 @@
 # QMK CLI
 
-This page describes how to setup and use the QMK CLI.
-
-# Overview
+## Overview
 
 The QMK CLI makes building and working with QMK keyboards easier. We have provided a number of commands to simplify and streamline tasks such as obtaining and compiling the QMK firmware, creating keymaps, and more.
 
-* [Global CLI](#global-cli)
-* [Local CLI](#local-cli)
-* [CLI Commands](#cli-commands)
+### Requirements
 
-# Requirements
+The CLI requires Python 3.5 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt). These are installed automatically when you install the QMK CLI.
 
-The CLI requires Python 3.5 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt).
-
-# Global CLI
-
-QMK provides an installable CLI that can be used to setup your QMK build environment, work with QMK, and which makes working with multiple copies of `qmk_firmware` easier. We recommend installing and updating this periodically.
-
-## Install Using Homebrew (macOS, some Linux)
+### Install Using Homebrew (macOS, some Linux)
 
 If you have installed [Homebrew](https://brew.sh) you can tap and install QMK:
 
@@ -29,7 +19,7 @@ export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
 qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```
 
-## Install Using easy_install or pip
+### Install Using easy_install or pip
 
 If your system is not listed above you can install QMK manually. First ensure that you have python 3.5 (or later) installed and have installed pip. Then install QMK with this command:
 
@@ -39,7 +29,7 @@ export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
 qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```
 
-## Packaging For Other Operating Systems
+### Packaging For Other Operating Systems
 
 We are looking for people to create and maintain a `qmk` package for more operating systems. If you would like to create a package for your OS please follow these guidelines:
 
@@ -47,268 +37,3 @@ We are looking for people to create and maintain a `qmk` package for more operat
     * Document why in a comment when you do deviate
 * Install using a virtualenv
 * Instruct the user to set the environment variable `QMK_HOME` to have the firmware source checked out somewhere other than `~/qmk_firmware`.
-
-# Local CLI
-
-If you do not want to use the global CLI there is a local CLI bundled with `qmk_firmware`. You can find it in `qmk_firmware/bin/qmk`. You can run the `qmk` command from any directory and it will always operate on that copy of `qmk_firmware`.
-
-**Example**:
-
-```
-$ ~/qmk_firmware/bin/qmk hello
-Ψ Hello, World!
-```
-
-## Local CLI Limitations
-
-There are some limitations to the local CLI compared to the global CLI:
-
-* The local CLI does not support `qmk setup` or `qmk clone`
-* The local CLI always operates on the same `qmk_firmware` tree, even if you have multiple repositories cloned.
-* The local CLI does not run in a virtualenv, so it's possible that dependencies will conflict
-
-# CLI Commands
-
-## `qmk cformat`
-
-This command formats C code using clang-format. 
-
-Run it with no arguments to format all core code that has been changed. Default checks `origin/master` with `git diff`, branch can be changed using `-b <branch_name>`
-
-Run it with `-a` to format all core code, or pass filenames on the command line to run it on specific files.
-
-**Usage for specified files**:
-
-```
-qmk cformat [file1] [file2] [...] [fileN]
-```
-
-**Usage for all core files**:
-
-```
-qmk cformat -a
-```
-
-**Usage for only changed files against origin/master**:
-
-```
-qmk cformat
-```
-
-**Usage for only changed files against branch_name**:
-
-```
-qmk cformat -b branch_name
-```
-
-## `qmk compile`
-
-This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
-
-**Usage for Configurator Exports**:
-
-```
-qmk compile <configuratorExport.json>
-```
-
-**Usage for Keymaps**:
-
-```
-qmk compile -kb <keyboard_name> -km <keymap_name>
-```
-
-**Usage in Keyboard Directory**:  
-
-Must be in keyboard directory with a default keymap, or in keymap directory for keyboard, or supply one with `--keymap <keymap_name>`
-```
-qmk compile
-```
-
-**Example**:
-```
-$ qmk config compile.keymap=default
-$ cd ~/qmk_firmware/keyboards/planck/rev6
-$ qmk compile
-Ψ Compiling keymap with make planck/rev6:default
-...
-```
-or with optional keymap argument
-
-```
-$ cd ~/qmk_firmware/keyboards/clueboard/66/rev4 
-$ qmk compile -km 66_iso
-Ψ Compiling keymap with make clueboard/66/rev4:66_iso
-...
-```
-or in keymap directory
-
-```
-$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak
-$ qmk compile
-Ψ Compiling keymap with make make gh60/satan:colemak
-...
-```
-
-**Usage in Layout Directory**:  
-
-Must be under `qmk_firmware/layouts/`, and in a keymap folder.
-```
-qmk compile -kb <keyboard_name>
-```
-
-**Example**:
-```
-$ cd ~/qmk_firmware/layouts/community/60_ansi/mechmerlin-ansi
-$ qmk compile -kb dz60
-Ψ Compiling keymap with make dz60:mechmerlin-ansi
-...
-```
-
-## `qmk flash`
-
-This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
-To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
-
-**Usage for Configurator Exports**:
-
-```
-qmk flash <configuratorExport.json> -bl <bootloader>
-```
-
-**Usage for Keymaps**:
-
-```
-qmk flash -kb <keyboard_name> -km <keymap_name> -bl <bootloader>
-```
-
-**Listing the Bootloaders**
-
-```
-qmk flash -b
-```
-
-## `qmk config`
-
-This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
-
-**Usage**:
-
-```
-qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
-```
-
-## `qmk docs`
-
-This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936.
-
-**Usage**:
-
-```
-qmk docs [-p PORT]
-```
-
-## `qmk doctor`
-
-This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to.
-
-**Usage**:
-
-```
-qmk doctor [-y] [-n]
-```
-
-**Examples**:
-
-Check your environment for problems and prompt to fix them:
-
-    qmk doctor
-
-Check your environment and automatically fix any problems found:
-
-    qmk doctor -y
-
-Check your environment and report problems only:
-
-    qmk doctor -n
-
-## `qmk json-keymap`
-
-Creates a keymap.c from a QMK Configurator export.
-
-**Usage**:
-
-```
-qmk json-keymap [-o OUTPUT] filename
-```
-
-## `qmk kle2json`
-
-This command allows you to convert from raw KLE data to QMK Configurator JSON. It accepts either an absolute file path, or a file name in the current directory. By default it will not overwrite `info.json` if it is already present. Use the `-f` or `--force` flag to overwrite.
-
-**Usage**:
-
-```
-qmk kle2json [-f] <filename>
-```
-
-**Examples**:
-
-```
-$ qmk kle2json kle.txt 
-☒ File info.json already exists, use -f or --force to overwrite.
-```
-
-```
-$ qmk kle2json -f kle.txt -f
-Ψ Wrote out to info.json
-```
-
-## `qmk list-keyboards`
-
-This command lists all the keyboards currently defined in `qmk_firmware`
-
-**Usage**:
-
-```
-qmk list-keyboards
-```
-
-## `qmk list-keymaps`
-
-This command lists all the keymaps for a specified keyboard (and revision).
-
-**Usage**:
-
-```
-qmk list-keymaps -kb planck/ez
-```
-
-## `qmk new-keymap`
-
-This command creates a new keymap based on a keyboard's existing default keymap.
-
-**Usage**:
-
-```
-qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
-```
-
-## `qmk pyformat`
-
-This command formats python code in `qmk_firmware`.
-
-**Usage**:
-
-```
-qmk pyformat
-```
-
-## `qmk pytest`
-
-This command runs the python test suite. If you make changes to python code you should ensure this runs successfully.
-
-**Usage**:
-
-```
-qmk pytest
-```

docs/cli_commands.md

@@ -0,0 +1,247 @@
+# QMK CLI Commands
+
+# CLI Commands
+
+## `qmk cformat`
+
+This command formats C code using clang-format. 
+
+Run it with no arguments to format all core code that has been changed. Default checks `origin/master` with `git diff`, branch can be changed using `-b <branch_name>`
+
+Run it with `-a` to format all core code, or pass filenames on the command line to run it on specific files.
+
+**Usage for specified files**:
+
+```
+qmk cformat [file1] [file2] [...] [fileN]
+```
+
+**Usage for all core files**:
+
+```
+qmk cformat -a
+```
+
+**Usage for only changed files against origin/master**:
+
+```
+qmk cformat
+```
+
+**Usage for only changed files against branch_name**:
+
+```
+qmk cformat -b branch_name
+```
+
+## `qmk compile`
+
+This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
+
+**Usage for Configurator Exports**:
+
+```
+qmk compile <configuratorExport.json>
+```
+
+**Usage for Keymaps**:
+
+```
+qmk compile -kb <keyboard_name> -km <keymap_name>
+```
+
+**Usage in Keyboard Directory**:  
+
+Must be in keyboard directory with a default keymap, or in keymap directory for keyboard, or supply one with `--keymap <keymap_name>`
+```
+qmk compile
+```
+
+**Example**:
+```
+$ qmk config compile.keymap=default
+$ cd ~/qmk_firmware/keyboards/planck/rev6
+$ qmk compile
+Ψ Compiling keymap with make planck/rev6:default
+...
+```
+or with optional keymap argument
+
+```
+$ cd ~/qmk_firmware/keyboards/clueboard/66/rev4 
+$ qmk compile -km 66_iso
+Ψ Compiling keymap with make clueboard/66/rev4:66_iso
+...
+```
+or in keymap directory
+
+```
+$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak
+$ qmk compile
+Ψ Compiling keymap with make make gh60/satan:colemak
+...
+```
+
+**Usage in Layout Directory**:  
+
+Must be under `qmk_firmware/layouts/`, and in a keymap folder.
+```
+qmk compile -kb <keyboard_name>
+```
+
+**Example**:
+```
+$ cd ~/qmk_firmware/layouts/community/60_ansi/mechmerlin-ansi
+$ qmk compile -kb dz60
+Ψ Compiling keymap with make dz60:mechmerlin-ansi
+...
+```
+
+## `qmk flash`
+
+This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
+To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
+
+**Usage for Configurator Exports**:
+
+```
+qmk flash <configuratorExport.json> -bl <bootloader>
+```
+
+**Usage for Keymaps**:
+
+```
+qmk flash -kb <keyboard_name> -km <keymap_name> -bl <bootloader>
+```
+
+**Listing the Bootloaders**
+
+```
+qmk flash -b
+```
+
+## `qmk config`
+
+This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
+
+**Usage**:
+
+```
+qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
+```
+
+## `qmk docs`
+
+This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936.
+
+**Usage**:
+
+```
+qmk docs [-p PORT]
+```
+
+## `qmk doctor`
+
+This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to.
+
+**Usage**:
+
+```
+qmk doctor [-y] [-n]
+```
+
+**Examples**:
+
+Check your environment for problems and prompt to fix them:
+
+    qmk doctor
+
+Check your environment and automatically fix any problems found:
+
+    qmk doctor -y
+
+Check your environment and report problems only:
+
+    qmk doctor -n
+
+## `qmk json2c`
+
+Creates a keymap.c from a QMK Configurator export.
+
+**Usage**:
+
+```
+qmk json2c [-o OUTPUT] filename
+```
+
+## `qmk kle2json`
+
+This command allows you to convert from raw KLE data to QMK Configurator JSON. It accepts either an absolute file path, or a file name in the current directory. By default it will not overwrite `info.json` if it is already present. Use the `-f` or `--force` flag to overwrite.
+
+**Usage**:
+
+```
+qmk kle2json [-f] <filename>
+```
+
+**Examples**:
+
+```
+$ qmk kle2json kle.txt 
+☒ File info.json already exists, use -f or --force to overwrite.
+```
+
+```
+$ qmk kle2json -f kle.txt -f
+Ψ Wrote out to info.json
+```
+
+## `qmk list-keyboards`
+
+This command lists all the keyboards currently defined in `qmk_firmware`
+
+**Usage**:
+
+```
+qmk list-keyboards
+```
+
+## `qmk list-keymaps`
+
+This command lists all the keymaps for a specified keyboard (and revision).
+
+**Usage**:
+
+```
+qmk list-keymaps -kb planck/ez
+```
+
+## `qmk new-keymap`
+
+This command creates a new keymap based on a keyboard's existing default keymap.
+
+**Usage**:
+
+```
+qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
+```
+
+## `qmk pyformat`
+
+This command formats python code in `qmk_firmware`.
+
+**Usage**:
+
+```
+qmk pyformat
+```
+
+## `qmk pytest`
+
+This command runs the python test suite. If you make changes to python code you should ensure this runs successfully.
+
+**Usage**:
+
+```
+qmk pytest
+```

docs/config_options.md

@@ -190,6 +190,8 @@ If you define these options you will enable the associated feature, which may in
   * pin the DI on the WS2812 is hooked-up to
 * `#define RGBLIGHT_ANIMATIONS`
   * run RGB animations
+* `#define RGBLIGHT_LAYERS`
+  * Lets you define [lighting layers](feature_rgblight.md) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state.
 * `#define RGBLED_NUM 12`
   * number of LEDs
 * `#define RGBLIGHT_SPLIT`

docs/eeprom_driver.md

@@ -2,14 +2,16 @@
 
 The EEPROM driver can be swapped out depending on the needs of the keyboard, or whether extra hardware is present.
 
-Driver                      | Description
---------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-`EEPROM_DRIVER = vendor`    | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. Other chips will generally act as "transient" below.
-`EEPROM_DRIVER = i2c`       | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below.
-`EEPROM_DRIVER = transient` | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost.
+Driver                             | Description
+-----------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+`EEPROM_DRIVER = vendor` (default) | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. STM32L0xx and STM32L1xx will use the onboard dedicated true EEPROM. Other chips will generally act as "transient" below.
+`EEPROM_DRIVER = i2c`              | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below.
+`EEPROM_DRIVER = transient`        | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost.
 
 ## Vendor Driver Configuration
 
+!> Resetting EEPROM using an STM32L0/L1 device takes up to 1 second for every 1kB of internal EEPROM used.
+
 No configurable options are available.
 
 ## I2C Driver Configuration

docs/feature_mouse_keys.md

@@ -58,6 +58,8 @@ This is the default mode. You can adjust the cursor and scrolling acceleration u
 |`MOUSEKEY_INTERVAL`         |50     |Time between cursor movements                            |
 |`MOUSEKEY_MAX_SPEED`        |10     |Maximum cursor speed at which acceleration stops         |
 |`MOUSEKEY_TIME_TO_MAX`      |20     |Time until maximum cursor speed is reached               |
+|`MOUSEKEY_WHEEL_DELAY`      |300    |Delay between pressing a wheel key and wheel movement    |
+|`MOUSEKEY_WHEEL_INTERVAL`   |100    |Time between wheel movements                             |
 |`MOUSEKEY_WHEEL_MAX_SPEED`  |8      |Maximum number of scroll steps per scroll action         |
 |`MOUSEKEY_WHEEL_TIME_TO_MAX`|40     |Time until maximum scroll speed is reached               |
 
@@ -66,6 +68,7 @@ Tips:
 * Setting `MOUSEKEY_DELAY` too low makes the cursor unresponsive. Setting it too high makes small movements difficult.
 * For smoother cursor movements, lower the value of `MOUSEKEY_INTERVAL`. If the refresh rate of your display is 60Hz, you could set it to `16` (1/60). As this raises the cursor speed significantly, you may want to lower `MOUSEKEY_MAX_SPEED`.
 * Setting `MOUSEKEY_TIME_TO_MAX` or `MOUSEKEY_WHEEL_TIME_TO_MAX` to `0` will disable acceleration for the cursor or scrolling respectively. This way you can make one of them constant while keeping the other accelerated, which is not possible in constant speed mode.
+* Setting `MOUSEKEY_WHEEL_INTERVAL` too low will make scrolling too fast. Setting it too high will make scrolling too slow when the wheel key is held down.
 
 Cursor acceleration uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
 

docs/feature_oled_driver.md

@@ -261,12 +261,24 @@ void oled_task(void);
 // Called at the start of oled_task, weak function overridable by the user
 void oled_task_user(void);
 
-// Scrolls the entire display right
+// Set the specific 8 lines rows of the screen to scroll.
+// 0 is the default for start, and 7 for end, which is the entire
+// height of the screen.  For 128x32 screens, rows 4-7 are not used.
+void oled_scroll_set_area(uint8_t start_line, uint8_t end_line);
+
+// Sets scroll speed, 0-7, fastest to slowest. Default is three.
+// Does not take effect until scrolling is either started or restarted
+// the ssd1306 supports 8 speeds with the delay
+// listed below betwen each frame of the scrolling effect
+// 0=2, 1=3, 2=4, 3=5, 4=25, 5=64, 6=128, 7=256
+void oled_scroll_set_speed(uint8_t speed);
+
+// Begin scrolling the entire display right
 // Returns true if the screen was scrolling or starts scrolling
 // NOTE: display contents cannot be changed while scrolling
 bool oled_scroll_right(void);
 
-// Scrolls the entire display left
+// Begin scrolling the entire display left
 // Returns true if the screen was scrolling or starts scrolling
 // NOTE: display contents cannot be changed while scrolling
 bool oled_scroll_left(void);

docs/feature_rgblight.md

@@ -172,6 +172,62 @@ const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
 const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 ```
 
+## Lighting Layers
+
+By including `#define RGBLIGHT_LAYERS` in your `config.h` file you can enable lighting layers. These make
+it easy to use your underglow LEDs as status indicators to show which keyboard layer is currently active, or the state of caps lock, all without disrupting any animations. [Here's a video](https://youtu.be/uLGE1epbmdY) showing an example of what you can do. 
+
+To define a layer, we modify `keymap.c` to list out LED ranges and the colors we want to overlay on them using an array of `rgblight_segment_t` using the `RGBLIGHT_LAYER_SEGMENTS` macro. We can define multiple layers and enable/disable them independently:
+
+```c
+// Light LEDs 6 to 9 and 12 to 15 red when caps lock is active. Hard to ignore!
+const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+	{6, 4, HSV_RED},       // Light 4 LEDs, starting with LED 6
+	{12, 4, HSV_RED}       // Light 4 LEDs, starting with LED 12
+);
+// Light LEDs 9 & 10 in cyan when keyboard layer 1 is active
+const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+	{9, 2, HSV_CYAN}
+);
+// Light LEDs 11 & 12 in purple when keyboard layer 2 is active
+const rgblight_segment_t PROGMEM my_layer2_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+	{11, 2, HSV_PURPLE}, 
+);
+// etc..
+```
+
+We combine these layers into an array using the `RGBLIGHT_LAYERS_LIST` macro, and assign it to the `rgblight_layers` variable during keyboard setup. Note that you can only define up to 8 lighting layers. Any extra layers will be ignored. Since the different lighting layers overlap, the order matters in the array, with later layers taking precedence:
+
+```c
+// Now define the array of layers. Later layers take precedence
+const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(
+	my_capslock_layer,
+	my_layer1_layer,    // Overrides caps lock layer
+	my_layer2_layer     // Overrides other layers
+);
+
+void keyboard_post_init_user(void) {
+	// Enable the LED layers
+	rgblight_layers = my_rgb_layers;
+}
+```
+
+Finally, we enable and disable the lighting layers whenever the state of the keyboard changes:
+
+```c
+layer_state_t layer_state_set_user(layer_state_t state) {
+	// Both layers will light up if both kb layers are active
+	rgblight_set_layer_state(1, layer_state_cmp(state, 1));
+	rgblight_set_layer_state(2, layer_state_cmp(state, 2));
+	return state;
+}
+
+bool led_update_user(led_t led_state) {
+	rgblight_set_layer_state(0, led_state.caps_lock);
+	return true;
+}
+```
+
 ## Functions
 
 If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:
@@ -263,6 +319,12 @@ rgblight_sethsv(HSV_GREEN, 2); // led 2
 |`rgblight_sethsv(h, s, v)`                  |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 |
 |`rgblight_sethsv_noeeprom(h, s, v)`         |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
 
+#### layer functions
+|Function                                    |Description  |
+|--------------------------------------------|-------------|
+|`rgblight_get_layer_state(i)`               |Returns `true` if lighting layer `i` is enabled |
+|`rgblight_set_layer_state(i, is_on)`        |Enable or disable lighting layer `i` based on value of `bool is_on` |
+
 #### query
 |Function               |Description      |
 |-----------------------|-----------------|

docs/feature_stenography.md

@@ -51,7 +51,7 @@ On the display tab click 'Open stroke display'. With Plover disabled you should
 
 ## Learning Stenography
 
-* [Learn Plover!](https://sites.google.com/site/ploverdoc/)
+* [Learn Plover!](https://sites.google.com/site/learnplover/)
 * [QWERTY Steno](http://qwertysteno.com/Home/)
 * [Steno Jig](https://joshuagrams.github.io/steno-jig/)
 * More resources at the Plover [Learning Stenography](https://github.com/openstenoproject/plover/wiki/Learning-Stenography) wiki

docs/getting_started_github.md

@@ -0,0 +1,65 @@
+# How to Use Github with QMK
+
+Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
+
+?> This guide assumes you're somewhat comfortable with running things at the command line, and have git installed on your system.
+
+Start on the [QMK Github page](https://github.com/qmk/qmk_firmware), and you'll see a button in the upper right that says "Fork":
+
+![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
+
+If you're a part of an organization, you'll need to choose which account to fork it to. In most circumstances, you'll want to fork it to your personal account. Once your fork is completed (sometimes this takes a little while), click the "Clone or Download" button:
+
+![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
+
+And be sure to select "HTTPS", and select the link and copy it:
+
+![HTTPS link](http://i.imgur.com/eGO0ohO.jpg)
+
+From here, enter `git clone --recurse-submodules ` into the command line, and then paste your link:
+
+```
+user@computer:~$ git clone --recurse-submodules https://github.com/whoeveryouare/qmk_firmware.git
+Cloning into 'qmk_firmware'...
+remote: Enumerating objects: 9, done.
+remote: Counting objects: 100% (9/9), done.
+remote: Compressing objects: 100% (5/5), done.
+remote: Total 183883 (delta 5), reused 4 (delta 4), pack-reused 183874
+Receiving objects: 100% (183883/183883), 132.90 MiB | 9.57 MiB/s, done.
+Resolving deltas: 100% (119972/119972), done.
+...
+Submodule path 'lib/chibios': checked out '587968d6cbc2b0e1c7147540872f2a67e59ca18b'
+Submodule path 'lib/chibios-contrib': checked out 'ede48346eee4b8d6847c19bc01420bee76a5e486'
+Submodule path 'lib/googletest': checked out 'ec44c6c1675c25b9827aacd08c02433cccde7780'
+Submodule path 'lib/lufa': checked out 'ce10f7642b0459e409839b23cc91498945119b4d'
+Submodule path 'lib/ugfx': checked out '3e97b74e03c93631cdd3ddb2ce43b963fdce19b2'
+```
+
+You now have your QMK fork on your local machine, and you can add your keymap, compile it and flash it to your board. Once you're happy with your changes, you can add, commit, and push them to your fork like this:
+
+```
+user@computer:~$ git add .
+user@computer:~$ git commit -m "adding my keymap"
+[master cccb1608] adding my keymap
+ 1 file changed, 1 insertion(+)
+ create mode 100644 keyboards/planck/keymaps/mine/keymap.c
+user@computer:~$ git push
+Counting objects: 1, done.
+Delta compression using up to 4 threads.
+Compressing objects: 100% (1/1), done.
+Writing objects: 100% (1/1), 1.64 KiB | 0 bytes/s, done.
+Total 1 (delta 1), reused 0 (delta 0)
+remote: Resolving deltas: 100% (1/1), completed with 1 local objects.
+To https://github.com/whoeveryouare/qmk_firmware.git
+ + 20043e64...7da94ac5 master -> master
+```
+
+Your changes now exist on your fork on Github - if you go back there (`https://github.com/<whoeveryouare>/qmk_firmware`), you can create a "New Pull Request" by clicking this button:
+
+![New Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
+
+Here you'll be able to see exactly what you've committed - if it all looks good, you can finalize it by clicking "Create Pull Request":
+
+![Create Pull Request](http://i.imgur.com/Ojydlaj.jpg)
+
+After submitting, we may talk to you about your changes, ask that you make changes, and eventually accept it! Thanks for contributing to QMK :)

docs/i2c_driver.md

@@ -2,27 +2,40 @@
 
 The I2C Master drivers used in QMK have a set of common functions to allow portability between MCUs.
 
+## An important note on I2C Addresses
+
+All of the addresses expected by this driver should be pushed to the upper 7 bits of the address byte.  Setting
+the lower bit (indicating read/write) will be done by the respective functions.  Almost all I2C addresses listed 
+on datasheets and the internet will be represented as 7 bits occupying the lower 7 bits and will need to be
+shifted to the left (more significant) by one bit.  This is easy to do via the bitwise shift operator `<< 1`.
+
+You can either do this on each call to the functions below, or once in your definition of the address.  For example if your device has an address of `0x18`:
+
+`#define MY_I2C_ADDRESS (0x18 << 1)`
+
+See https://www.robot-electronics.co.uk/i2c-tutorial for more information about I2C addressing and other technical details.
+
 ## Available functions
 
 |Function                                                                                                          |Description                                                                                                                                                                  |
 |------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
 |`void i2c_init(void);`                                                                                            |Initializes the I2C driver. This function should be called once before any transaction is initiated.                                                                         |
-|`uint8_t i2c_start(uint8_t address, uint16_t timeout);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
-|`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
-|`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
-|`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
-|`uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
-|`uint8_t i2c_stop(void);`                                                                                         |Ends an I2C transaction.                                                                                                                                                     |
+|`i2c_status_t i2c_start(uint8_t address, uint16_t timeout);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
+|`i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
+|`i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
+|`i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
+|`i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
+|`i2c_status_t i2c_stop(void);`                                                                                         |Ends an I2C transaction.                                                                                                                                                     |
 
 ### Function Return
 
 All the above functions, except `void i2c_init(void);` return the following truth table:
 
-|Return Value   |Description                                        |
-|---------------|---------------------------------------------------|
-|0              |Operation executed successfully.                   |
-|-1             |Operation failed.                                  |
-|-2             |Operation timed out.                               |
+|Return Constant     |Value|Description                     |
+|--------------------|-----|--------------------------------|
+|`I2C_STATUS_SUCCESS`|0    |Operation executed successfully.|
+|`I2C_STATUS_ERROR`  |-1   |Operation failed.               |
+|`I2C_STATUS_TIMEOUT`|-2   |Operation timed out.            |
 
 
 ## AVR

docs/index.html

@@ -16,7 +16,8 @@
   <link rel="stylesheet" href="//unpkg.com/docsify/lib/themes/buble.css" title="light">
   <link rel="stylesheet" href="//unpkg.com/docsify/lib/themes/dark.css" media="(prefers-color-scheme: dark)">
   <link rel="stylesheet" href="//unpkg.com/docsify-toc@1.0.0/dist/toc.css">
-  <link rel="stylesheet" href="sidebar.css" />
+  <link rel="stylesheet" href="qmk_custom_light.css">
+  <link rel="stylesheet" href="qmk_custom_dark.css" media="(prefers-color-scheme: dark)">
 </head>
 <body>
   <div id="app"></div>
@@ -32,6 +33,7 @@
         // Moved pages
         '/adding_a_keyboard_to_qmk': '/hardware_keyboard_guidelines',
         '/build_environment_setup': '/getting_started_build_tools',
+        '/cli_dev_configuration': '/cli_configuration',
         '/dynamic_macros': '/feature_dynamic_macros',
         '/feature_common_shortcuts': '/feature_advanced_keycodes',
         '/glossary': '/reference_glossary',

docs/ja/cli.md

@@ -215,14 +215,14 @@ qmk doctor [-y] [-n]
 
     qmk doctor -n
 
-## `qmk json-keymap`
+## `qmk json2c`
 
 QMK Configurator からエクスポートしたものから keymap.c を生成します。
 
 **使用法**:
 
 ```
-qmk json-keymap [-o OUTPUT] filename
+qmk json2c [-o OUTPUT] filename
 ```
 
 ## `qmk kle2json`

docs/ja/i2c_driver.md

@@ -0,0 +1,128 @@
+# I2C マスタドライバ
+
+<!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
+  original document: 85041ff05:docs/i2c_driver.md
+  git diff 85041ff05 HEAD -- docs/i2c_driver.md | cat
+-->
+
+QMK で使われる I2C マスタドライバには、MCU 間のポータビリティを提供するための一連の関数が用意されています。
+
+## 使用できる関数
+
+| 関数                                                                                                        | 説明                                                                                                                                                                                |
+|-------------------------------------------------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+| `void i2c_init(void);`                                                                                      | I2C ドライバを初期化します。他のあらゆるトランザクションを開始する前に、この関数を一度だけ呼ぶ必要があります。                                                                      |
+| `uint8_t i2c_start(uint8_t address, uint16_t timeout);`                                                     | I2C トランザクションを開始します。アドレスは方向ビットのない7ビットスレーブアドレスです。                                                                                           |
+| `uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                  | I2C 経由でデータを送信します。アドレスは方向ビットのない7ビットスレーブアドレスです。トランザクションのステータスを返します。                                                       |
+| `uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                   | I2C 経由でデータを受信します。アドレスは方向ビットのない7ビットスレーブアドレスです。 `length` で指定した長さのバイト列を `data` に保存し、トランザクションのステータスを返します。 |
+| `uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);` | `i2c_transmit` と同様ですが、 `regaddr` でスレーブのデータ書き込み先のレジスタを指定します。                                                                                    |
+| `uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`  | `i2c_receive` と同様ですが、 `regaddr` でスレーブのデータ読み込み先のレジスタを指定します。                                                                                     |
+| `uint8_t i2c_stop(void);`                                                                                   | I2C トランザクションを終了します。                                                                                                                                                  |
+
+### 関数の戻り値
+
+`void i2c_init(void)` を除く上にあるすべての関数は、次の真理値表にある値を返します。
+
+| 戻り値 | 説明                         |
+|--------|------------------------------|
+| 0      | 処理が正常に実行されました。 |
+| -1     | 処理に失敗しました。         |
+| -2     | 処理がタイムアウトしました。 |
+
+## AVR
+
+### 設定
+
+I2Cマスタドライバを設定するために、次の定義が使えます。
+
+| 変数    | 説明                | 既定値 |
+|---------|---------------------|--------|
+| `F_SCL` | クロック周波数 (Hz) | 400KHz |
+
+
+AVR は通常 I2C ピンとして使う GPIO が設定されているので、これ以上の設定は必要ありません。
+
+## ARM
+
+ARM の場合は、内部に ChibiOS I2C HAL ドライバがあります。この節では STM32 MCU を使用していると仮定します。
+
+### 設定
+
+ARM MCU 用の設定はしばしば非常に複雑です。これは、多くの場合複数の I2C ドライバをさまざまなポートに対して割り当てられるためです。
+
+最初に、必要なハードウェアドライバを有効にするために `mcuconf.h` ファイルをセットアップします。
+
+| 変数                          | 説明                                                                                           | 既定値 |
+|-------------------------------|------------------------------------------------------------------------------------------------|--------|
+| `#STM32_I2C_USE_XXX`          | ハードウェアドライバ XXX の有効化/無効化（すべてのドライバを明示的にリストアップする必要あり） | FALSE  |
+| `#STM32_I2C_BUSY_TIMEOUT`     | レスポンスの受信がない場合に I2C コマンドを中断するまでの時間 (ms)                             | 50     |
+| `#STM32_I2C_XXX_IRQ_PRIORITY` | ハードウェアドライバ XXX の割り込み優先度（上級者向けの設定）                                  | 10     |
+| `#STM32_I2C_USE_DMA`          | MCU がデータ送信を DMA ユニットにオフロードする機能の有効化/無効化                             | TRUE   |
+| `#STM32_I2C_XXX_DMA_PRIORITY` | ハードウェアドライバ XXX に使用する DMA ユニットの優先度（上級者向けの設定）                   | 1      |
+
+次に `halconf.h` ファイル内で `#define HAL_USE_I2C` を `TRUE` にします。これにより ChibiOS が I2C ドライバを読み込みます。
+
+最後に、使用したい I2C ハードウェアドライバに応じて正しい GPIO ピンを割り当てます。
+
+標準では I2C1 ハードウェアドライバが使われます。もし他のハードウェアドライバを使う場合、 `config.h` ファイルに `#define I2C_DRIVER I2CDX` を追加します（ X は使用するハードウェアドライバの番号です）。例えば I2C3 を有効化する場合、`config.h` ファイルに `#define I2C_DRIVER I2CD3` と定義します。これにより QMK I2C ドライバと ChibiOS I2C driver が同期されます。
+
+STM32 MCU では、使用するハードウェアドライバにより、さまざまなピンを I2C ピンとして設定できます。標準では `B6`, `B7` ピンが I2C 用のピンです。 I2C 用のピンを設定するために次の定義が使えます：
+
+| 変数                  | 説明                                                                                             | 既定値  |
+|-----------------------|--------------------------------------------------------------------------------------------------|---------|
+| `I2C1_SCL_BANK`       | SCL に使うピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)                                               | `GPIOB` |
+| `I2C1_SDA_BANK`       | SDA に使うピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)                                               | `GPIOB` |
+| `I2C1_SCL`            | SCL のピン番号 (0-9)                                                                             | `6`     |
+| `I2C1_SDA`            | SDA のピン番号 (0-9)                                                                             | `7`     |
+| `I2C1_BANK`（非推奨） | 使用するピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)。後継は `I2C1_SCL_BANK`, `I2C1_SDA_BANK` です。 | `GPIOB` |
+
+ChibiOS I2C ドライバの設定項目は STM32 MCU の種類に依存します。
+
+    STM32F1xx, STM32F2xx, STM32F4xx, STM32L0xx, STM32L1xx では I2Cv1 が使われます。
+    STM32F0xx, STM32F3xx, STM32F7xx, STM32L4xx では I2Cv2 が使われます。
+
+#### I2Cv1
+
+STM32 MCU の I2Cv1 では、クロック周波数とデューティ比を次の変数で変更できます。詳しくは <https://www.playembedded.org/blog/stm32-i2c-chibios/#I2Cv1_configuration_structure> を参照してください。
+
+| 変数               | 既定値           |
+|--------------------|------------------|
+| `I2C1_OPMODE`      | `OPMODE_I2C`     |
+| `I2C1_CLOCK_SPEED` | `100000`         |
+| `I2C1_DUTY_CYCLE`  | `STD_DUTY_CYCLE` |
+
+#### I2Cv2
+
+STM32 MCU の I2Cv2 では、信号のタイミングパラメータを次の変数で変更できます。詳しくは <https://www.st.com/en/embedded-software/stsw-stm32126.html> を参照してください。
+
+| 変数                  | 既定値 |
+|-----------------------|--------|
+| `I2C1_TIMINGR_PRESC`  | `15U`  |
+| `I2C1_TIMINGR_SCLDEL` | `4U`   |
+| `I2C1_TIMINGR_SDADEL` | `2U`   |
+| `I2C1_TIMINGR_SCLH`   | `15U`  |
+| `I2C1_TIMINGR_SCLL`   | `21U`  |
+
+STM32 MCU では GPIO ピンを設定するとき、別の「代替機能」モードを使うことができます。これは I2Cv2 モードで使われるピンを変更するために必要です。適切な設定値は、使用している MCU のデータシートを参照してください。
+
+| 変数                | 既定値 |
+|---------------------|--------|
+| `I2C1_SCL_PAL_MODE` | `4`    |
+| `I2C1_SDA_PAL_MODE` | `4`    |
+
+#### その他
+
+`void i2c_init(void)` 関数は `weak` 属性が付いており、オーバーロードすることができます。この場合、上記で設定した変数は使用されません。可能な GPIO の設定については、 MCU のデータシートを参照してください。次に示すのは初期化関数の例です：
+
+```C
+void i2c_init(void)
+{
+  setPinInput(B6); // Try releasing special pins for a short time
+  setPinInput(B7);
+  wait_ms(10); // Wait for the release to happen
+
+  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function
+  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function
+}
+```

docs/other_eclipse.md

@@ -17,7 +17,7 @@ Note that this set-up has been tested on Ubuntu 16.04 only for the moment.
 
 # Prerequisites
 ## Build Environment
-Before starting, you must have followed the [Getting Started](news_getting_started.md) section of the Tutorial. In particular, you must have been able to build the firmware with [the `qmk compile` command](news_building_firmware#build-your-firmware).
+Before starting, you must have followed the [Getting Started](newbs_getting_started.md) section of the Tutorial. In particular, you must have been able to build the firmware with [the `qmk compile` command](newbs_building_firmware.md#build-your-firmware).
 
 ## Java
 Eclipse is a Java application, so you will need to install Java 8 or more recent to be able to run it. You may choose between the JRE or the JDK, the latter being useful if you intend to do Java development.

docs/qmk_custom_dark.css

@@ -0,0 +1,29 @@
+.sidebar li.active {
+    background-color: #555;
+}
+
+.markdown-section p.tip,
+.markdown-section tr:nth-child(2n) {
+ background-color:#444;
+}
+
+.markdown-section tr {
+    border-top: 1px solid #555;
+}
+
+.markdown-section td, .markdown-section th {
+    border: 1px solid #555;
+}
+
+.markdown-section p.tip code {
+    background-color: #555;
+    color: #fff;
+}
+
+.page_toc code {
+    background-color: #555;
+}
+
+.markdown-section hr, .search {
+    border-bottom: 1px solid #777 !important;
+}

drivers/arm/analog.c

@@ -0,0 +1,207 @@
+/* Copyright 2019 Drew Mills
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "analog.h"
+#include "quantum.h"
+
+/* User configurable ADC options */
+#ifndef ADC_CIRCULAR_BUFFER
+#    define ADC_CIRCULAR_BUFFER FALSE
+#endif
+
+#ifndef ADC_NUM_CHANNELS
+#    define ADC_NUM_CHANNELS 1
+#elif ADC_NUM_CHANNELS != 1
+#    error "The ARM ADC implementation currently only supports reading one channel at a time."
+#endif
+
+#ifndef ADC_BUFFER_DEPTH
+#    define ADC_BUFFER_DEPTH 2
+#endif
+
+// For more sampling rate options, look at hal_adc_lld.h in ChibiOS
+#ifndef ADC_SAMPLING_RATE
+#    define ADC_SAMPLING_RATE ADC_SMPR_SMP_1P5
+#endif
+
+// Options are 12, 10, 8, and 6 bit.
+#ifndef ADC_RESOLUTION
+#    define ADC_RESOLUTION ADC_CFGR1_RES_12BIT
+#endif
+
+static ADCConfig   adcCfg = {};
+static adcsample_t sampleBuffer[ADC_NUM_CHANNELS * ADC_BUFFER_DEPTH];
+
+// Initialize to max number of ADCs, set to empty object to initialize all to false.
+#if defined(STM32F0XX)
+static bool adcInitialized[1] = {};
+#elif defined(STM32F3XX)
+static bool adcInitialized[4] = {};
+#else
+#    error "adcInitialized has not been implemented for this ARM microcontroller."
+#endif
+
+static ADCConversionGroup adcConversionGroup = {
+    ADC_CIRCULAR_BUFFER,
+    (uint16_t)(ADC_NUM_CHANNELS),
+    NULL,  // No end callback
+    NULL,  // No error callback
+#if defined(STM32F0XX)
+    ADC_CFGR1_CONT | ADC_RESOLUTION,
+    ADC_TR(0, 0).ADC_SAMPLING_RATE,
+    NULL,  // Doesn't specify a default channel
+#elif defined(STM32F3XX)
+    ADC_CFGR_CONT | ADC_RESOLUTION,
+    ADC_TR(0, 4095),
+    {
+        ADC_SAMPLING_RATE,
+        ADC_SAMPLING_RATE,
+    },
+    {
+        0,  // Doesn't specify a default channel
+        0,
+        0,
+        0,
+    },
+#endif
+};
+
+static inline ADCDriver* intToADCDriver(uint8_t adcInt) {
+    ADCDriver* target;
+
+    switch (adcInt) {
+        // clang-format off
+#if STM32_ADC_USE_ADC1
+        case 0: target = &ADCD1; break;
+#endif
+#if STM32_ADC_USE_ADC2
+        case 1: target = &ADCD2; break;
+#endif
+#if STM32_ADC_USE_ADC3
+        case 2: target = &ADCD3; break;
+#endif
+#if STM32_ADC_USE_ADC4
+        case 3: target = &ADCD4; break;
+#endif
+        default: target = NULL; break;
+            // clang-format on
+    }
+
+    return target;
+}
+
+static inline void manageAdcInitializationDriver(uint8_t adc, ADCDriver* adcDriver) {
+    if (!adcInitialized[adc]) {
+        adcStart(adcDriver, &adcCfg);
+        adcInitialized[adc] = true;
+    }
+}
+
+static inline void manageAdcInitialization(uint8_t adc) { manageAdcInitializationDriver(adc, intToADCDriver(adc)); }
+
+pin_and_adc pinToMux(pin_t pin) {
+    switch (pin) {
+        // clang-format off
+#if defined(STM32F0XX)
+        case A0:  return (pin_and_adc){ ADC_CHANNEL_IN0,  0 };
+        case A1:  return (pin_and_adc){ ADC_CHANNEL_IN1,  0 };
+        case A2:  return (pin_and_adc){ ADC_CHANNEL_IN2,  0 };
+        case A3:  return (pin_and_adc){ ADC_CHANNEL_IN3,  0 };
+        case A4:  return (pin_and_adc){ ADC_CHANNEL_IN4,  0 };
+        case A5:  return (pin_and_adc){ ADC_CHANNEL_IN5,  0 };
+        case A6:  return (pin_and_adc){ ADC_CHANNEL_IN6,  0 };
+        case A7:  return (pin_and_adc){ ADC_CHANNEL_IN7,  0 };
+        case B0:  return (pin_and_adc){ ADC_CHANNEL_IN8,  0 };
+        case B1:  return (pin_and_adc){ ADC_CHANNEL_IN9,  0 };
+        case C0:  return (pin_and_adc){ ADC_CHANNEL_IN10, 0 };
+        case C1:  return (pin_and_adc){ ADC_CHANNEL_IN11, 0 };
+        case C2:  return (pin_and_adc){ ADC_CHANNEL_IN12, 0 };
+        case C3:  return (pin_and_adc){ ADC_CHANNEL_IN13, 0 };
+        case C4:  return (pin_and_adc){ ADC_CHANNEL_IN14, 0 };
+        case C5:  return (pin_and_adc){ ADC_CHANNEL_IN15, 0 };
+#elif defined(STM32F3XX)
+        case A0:  return (pin_and_adc){ ADC_CHANNEL_IN1,  0 };
+        case A1:  return (pin_and_adc){ ADC_CHANNEL_IN2,  0 };
+        case A2:  return (pin_and_adc){ ADC_CHANNEL_IN3,  0 };
+        case A3:  return (pin_and_adc){ ADC_CHANNEL_IN4,  0 };
+        case A4:  return (pin_and_adc){ ADC_CHANNEL_IN1,  1 };
+        case A5:  return (pin_and_adc){ ADC_CHANNEL_IN2,  1 };
+        case A6:  return (pin_and_adc){ ADC_CHANNEL_IN3,  1 };
+        case A7:  return (pin_and_adc){ ADC_CHANNEL_IN4,  1 };
+        case B0:  return (pin_and_adc){ ADC_CHANNEL_IN12, 2 };
+        case B1:  return (pin_and_adc){ ADC_CHANNEL_IN1,  2 };
+        case B2:  return (pin_and_adc){ ADC_CHANNEL_IN12, 1 };
+        case B12: return (pin_and_adc){ ADC_CHANNEL_IN2,  3 };
+        case B13: return (pin_and_adc){ ADC_CHANNEL_IN3,  3 };
+        case B14: return (pin_and_adc){ ADC_CHANNEL_IN4,  3 };
+        case B15: return (pin_and_adc){ ADC_CHANNEL_IN5,  3 };
+        case C0:  return (pin_and_adc){ ADC_CHANNEL_IN6,  0 }; // Can also be ADC2
+        case C1:  return (pin_and_adc){ ADC_CHANNEL_IN7,  0 }; // Can also be ADC2
+        case C2:  return (pin_and_adc){ ADC_CHANNEL_IN8,  0 }; // Can also be ADC2
+        case C3:  return (pin_and_adc){ ADC_CHANNEL_IN9,  0 }; // Can also be ADC2
+        case C4:  return (pin_and_adc){ ADC_CHANNEL_IN5,  1 };
+        case C5:  return (pin_and_adc){ ADC_CHANNEL_IN11, 1 };
+        case D8:  return (pin_and_adc){ ADC_CHANNEL_IN12, 3 };
+        case D9:  return (pin_and_adc){ ADC_CHANNEL_IN13, 3 };
+        case D10: return (pin_and_adc){ ADC_CHANNEL_IN7,  2 }; // Can also be ADC4
+        case D11: return (pin_and_adc){ ADC_CHANNEL_IN8,  2 }; // Can also be ADC4
+        case D12: return (pin_and_adc){ ADC_CHANNEL_IN9,  2 }; // Can also be ADC4
+        case D13: return (pin_and_adc){ ADC_CHANNEL_IN10, 2 }; // Can also be ADC4
+        case D14: return (pin_and_adc){ ADC_CHANNEL_IN11, 2 }; // Can also be ADC4
+        case E7:  return (pin_and_adc){ ADC_CHANNEL_IN13, 2 };
+        case E8:  return (pin_and_adc){ ADC_CHANNEL_IN6,  2 }; // Can also be ADC4
+        case E9:  return (pin_and_adc){ ADC_CHANNEL_IN2,  2 };
+        case E10: return (pin_and_adc){ ADC_CHANNEL_IN14, 2 };
+        case E11: return (pin_and_adc){ ADC_CHANNEL_IN15, 2 };
+        case E12: return (pin_and_adc){ ADC_CHANNEL_IN16, 2 };
+        case E13: return (pin_and_adc){ ADC_CHANNEL_IN3,  2 };
+        case E14: return (pin_and_adc){ ADC_CHANNEL_IN1,  3 };
+        case E15: return (pin_and_adc){ ADC_CHANNEL_IN2,  3 };
+        case F2:  return (pin_and_adc){ ADC_CHANNEL_IN10, 0 }; // Can also be ADC2
+        case F4:  return (pin_and_adc){ ADC_CHANNEL_IN5,  0 };
+#else
+#error "An ADC pin-to-mux configuration has not been specified for this microcontroller."
+#endif
+        default:  return (pin_and_adc){ 0, 0 };
+            // clang-format on
+    }
+}
+
+adcsample_t analogReadPin(pin_t pin) { return adc_read(pinToMux(pin)); }
+
+adcsample_t analogReadPinAdc(pin_t pin, uint8_t adc) {
+    pin_and_adc target = pinToMux(pin);
+    target.adc         = adc;
+    return adc_read(target);
+}
+
+adcsample_t adc_read(pin_and_adc mux) {
+#if defined(STM32F0XX)
+    adcConversionGroup.sqr = ADC_CHSELR_CHSEL1;
+#elif defined(STM32F3XX)
+    adcConversionGroup.sqr[0] = ADC_SQR1_SQ1_N(mux.pin);
+#else
+#    error "adc_read has not been updated to support this ARM microcontroller."
+#endif
+
+    ADCDriver* targetDriver = intToADCDriver(mux.adc);
+    manageAdcInitializationDriver(mux.adc, targetDriver);
+
+    adcConvert(targetDriver, &adcConversionGroup, &sampleBuffer[0], ADC_BUFFER_DEPTH);
+    adcsample_t* result = sampleBuffer;
+
+    return *result;
+}

drivers/arm/analog.h

@@ -0,0 +1,57 @@
+/* Copyright 2019 Drew Mills
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "ch.h"
+#include <hal.h>
+
+#if !defined(STM32F0XX) && !defined(STM32F3XX)
+#    error "Only STM23F0 and STM32F3 devices have ADC support in QMK at this time."
+#endif
+
+#if !HAL_USE_ADC
+#    error "You need to set HAL_USE_ADC to TRUE in your halconf.h to use the ADC."
+#endif
+
+#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4
+#    error "You need to set one of the 'STM32_ADC_USE_ADCx' settings to TRUE in your mcuconf.h to use the ADC."
+#endif
+
+#if STM32_ADC_DUAL_MODE
+#    error "STM32 ADC Dual Mode is not supported at this time."
+#endif
+
+#if STM32_ADCV3_OVERSAMPLING
+#    error "STM32 ADCV3 Oversampling is not supported at this time."
+#endif
+
+typedef struct {
+    pin_t   pin;
+    uint8_t adc;
+} pin_and_adc;
+#define PIN_AND_ADC(p, a) \
+    (pin_and_adc) { p, a }
+
+// analogReference has been left un-defined for ARM devices.
+// void analogReference(uint8_t mode);
+
+adcsample_t analogReadPin(pin_t pin);
+adcsample_t analogReadPinAdc(pin_t pin, uint8_t adc);
+pin_and_adc pinToMux(pin_t pin);
+
+adcsample_t adc_read(pin_and_adc mux);

drivers/avr/pro_micro.h

@@ -1,324 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS 30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT DDRD |= (1 << 5), DDRB |= (1 << 0)
-#define TXLED0 PORTD |= (1 << 5)
-#define TXLED1 PORTD &= ~(1 << 5)
-#define RXLED0 PORTB |= (1 << 0)
-#define RXLED1 PORTB &= ~(1 << 0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0  = 18;
-static const uint8_t ADC1  = 19;
-static const uint8_t ADC2  = 20;
-static const uint8_t ADC3  = 21;
-static const uint8_t ADC4  = 22;
-static const uint8_t ADC5  = 23;
-static const uint8_t ADC6  = 24;  // D4
-static const uint8_t ADC7  = 25;  // D6
-static const uint8_t ADC8  = 26;  // D8
-static const uint8_t ADC9  = 27;  // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) (((p) >= 8 && (p) <= 11) ? (p)-4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P) (pgm_read_byte(analog_pin_to_channel_PGM + (P)))
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT, NOT_A_PORT, (uint16_t)&DDRB, (uint16_t)&DDRC, (uint16_t)&DDRD, (uint16_t)&DDRE, (uint16_t)&DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT, NOT_A_PORT, (uint16_t)&PORTB, (uint16_t)&PORTC, (uint16_t)&PORTD, (uint16_t)&PORTE, (uint16_t)&PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT, NOT_A_PORT, (uint16_t)&PINB, (uint16_t)&PINC, (uint16_t)&PIND, (uint16_t)&PINE, (uint16_t)&PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD,  // D0 - PD2
-    PD,  // D1 - PD3
-    PD,  // D2 - PD1
-    PD,  // D3 - PD0
-    PD,  // D4 - PD4
-    PC,  // D5 - PC6
-    PD,  // D6 - PD7
-    PE,  // D7 - PE6
-
-    PB,  // D8 - PB4
-    PB,  // D9 - PB5
-    PB,  // D10 - PB6
-    PB,  // D11 - PB7
-    PD,  // D12 - PD6
-    PC,  // D13 - PC7
-
-    PB,  // D14 - MISO - PB3
-    PB,  // D15 - SCK - PB1
-    PB,  // D16 - MOSI - PB2
-    PB,  // D17 - SS - PB0
-
-    PF,  // D18 - A0 - PF7
-    PF,  // D19 - A1 - PF6
-    PF,  // D20 - A2 - PF5
-    PF,  // D21 - A3 - PF4
-    PF,  // D22 - A4 - PF1
-    PF,  // D23 - A5 - PF0
-
-    PD,  // D24 - PD5
-    PD,  // D25 / D6 - A7 - PD7
-    PB,  // D26 / D8 - A8 - PB4
-    PB,  // D27 / D9 - A9 - PB5
-    PB,  // D28 / D10 - A10 - PB6
-    PD,  // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2),  // D0 - PD2
-    _BV(3),  // D1 - PD3
-    _BV(1),  // D2 - PD1
-    _BV(0),  // D3 - PD0
-    _BV(4),  // D4 - PD4
-    _BV(6),  // D5 - PC6
-    _BV(7),  // D6 - PD7
-    _BV(6),  // D7 - PE6
-
-    _BV(4),  // D8 - PB4
-    _BV(5),  // D9 - PB5
-    _BV(6),  // D10 - PB6
-    _BV(7),  // D11 - PB7
-    _BV(6),  // D12 - PD6
-    _BV(7),  // D13 - PC7
-
-    _BV(3),  // D14 - MISO - PB3
-    _BV(1),  // D15 - SCK - PB1
-    _BV(2),  // D16 - MOSI - PB2
-    _BV(0),  // D17 - SS - PB0
-
-    _BV(7),  // D18 - A0 - PF7
-    _BV(6),  // D19 - A1 - PF6
-    _BV(5),  // D20 - A2 - PF5
-    _BV(4),  // D21 - A3 - PF4
-    _BV(1),  // D22 - A4 - PF1
-    _BV(0),  // D23 - A5 - PF0
-
-    _BV(5),  // D24 - PD5
-    _BV(7),  // D25 / D6 - A7 - PD7
-    _BV(4),  // D26 / D8 - A8 - PB4
-    _BV(5),  // D27 / D9 - A9 - PB5
-    _BV(6),  // D28 / D10 - A10 - PB6
-    _BV(6),  // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, TIMER0B, /* 3 */
-    NOT_ON_TIMER, TIMER3A,                             /* 5 */
-    TIMER4D,                                           /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER, TIMER1A, /* 9 */
-    TIMER1B,               /* 10 */
-    TIMER0A,               /* 11 */
-
-    NOT_ON_TIMER, TIMER4A, /* 13 */
-
-    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER,
-
-    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,   // A0               PF7                 ADC7
-    6,   // A1               PF6                 ADC6
-    5,   // A2               PF5                 ADC5
-    4,   // A3               PF4                 ADC4
-    1,   // A4               PF1                 ADC1
-    0,   // A5               PF0                 ADC0
-    8,   // A6       D4      PD4                 ADC8
-    10,  // A7       D6      PD7                 ADC10
-    11,  // A8       D8      PB4                 ADC11
-    12,  // A9       D9      PB5                 ADC12
-    13,  // A10      D10     PB6                 ADC13
-    9    // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR Serial
-#define SERIAL_PORT_USBVIRTUAL Serial
-#define SERIAL_PORT_HARDWARE Serial1
-#define SERIAL_PORT_HARDWARE_OPEN Serial1
-
-#endif /* Pins_Arduino_h */

drivers/eeprom/eeprom_stm32_L0_L1.c

@@ -0,0 +1,96 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+#include "hal.h"
+#include "eeprom_driver.h"
+#include "eeprom_stm32_L0_L1.h"
+
+#define EEPROM_BASE_ADDR 0x08080000
+#define EEPROM_ADDR(offset) (EEPROM_BASE_ADDR + (offset))
+#define EEPROM_PTR(offset) ((__IO uint8_t *)EEPROM_ADDR(offset))
+#define EEPROM_BYTE(location, offset) (*(EEPROM_PTR(((uint32_t)location) + ((uint32_t)offset))))
+
+#define BUFFER_BYTE(buffer, offset) (*(((uint8_t *)buffer) + offset))
+
+#define FLASH_PEKEY1 0x89ABCDEF
+#define FLASH_PEKEY2 0x02030405
+
+static inline void STM32_L0_L1_EEPROM_WaitNotBusy(void) {
+    while (FLASH->SR & FLASH_SR_BSY) {
+        __WFI();
+    }
+}
+
+static inline void STM32_L0_L1_EEPROM_Unlock(void) {
+    STM32_L0_L1_EEPROM_WaitNotBusy();
+    if (FLASH->PECR & FLASH_PECR_PELOCK) {
+        FLASH->PEKEYR = FLASH_PEKEY1;
+        FLASH->PEKEYR = FLASH_PEKEY2;
+    }
+}
+
+static inline void STM32_L0_L1_EEPROM_Lock(void) {
+    STM32_L0_L1_EEPROM_WaitNotBusy();
+    FLASH->PECR |= FLASH_PECR_PELOCK;
+}
+
+void eeprom_driver_init(void) {}
+
+void eeprom_driver_erase(void) {
+    STM32_L0_L1_EEPROM_Unlock();
+
+    for (size_t offset = 0; offset < STM32_ONBOARD_EEPROM_SIZE; offset += sizeof(uint32_t)) {
+        FLASH->PECR |= FLASH_PECR_ERASE | FLASH_PECR_DATA;
+
+        *(__IO uint32_t *)EEPROM_ADDR(offset) = (uint32_t)0;
+
+        STM32_L0_L1_EEPROM_WaitNotBusy();
+        FLASH->PECR &= ~(FLASH_PECR_ERASE | FLASH_PECR_DATA);
+    }
+
+    STM32_L0_L1_EEPROM_Lock();
+}
+
+void eeprom_read_block(void *buf, const void *addr, size_t len) {
+    for (size_t offset = 0; offset < len; ++offset) {
+        // Drop out if we've hit the limit of the EEPROM
+        if ((((uint32_t)addr) + offset) >= STM32_ONBOARD_EEPROM_SIZE) {
+            break;
+        }
+
+        STM32_L0_L1_EEPROM_WaitNotBusy();
+        BUFFER_BYTE(buf, offset) = EEPROM_BYTE(addr, offset);
+    }
+}
+
+void eeprom_write_block(const void *buf, void *addr, size_t len) {
+    STM32_L0_L1_EEPROM_Unlock();
+
+    for (size_t offset = 0; offset < len; ++offset) {
+        // Drop out if we've hit the limit of the EEPROM
+        if ((((uint32_t)addr) + offset) >= STM32_ONBOARD_EEPROM_SIZE) {
+            break;
+        }
+
+        STM32_L0_L1_EEPROM_WaitNotBusy();
+        EEPROM_BYTE(addr, offset) = BUFFER_BYTE(buf, offset);
+    }
+
+    STM32_L0_L1_EEPROM_Lock();
+}

drivers/eeprom/eeprom_stm32_L0_L1.h

@@ -0,0 +1,33 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/*
+    The size used by the STM32 L0/L1 EEPROM driver.
+*/
+#ifndef STM32_ONBOARD_EEPROM_SIZE
+#    ifdef VIA_ENABLE
+#        define STM32_ONBOARD_EEPROM_SIZE 1024
+#    else
+#        include "eeconfig.h"
+#        define STM32_ONBOARD_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4)  // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO and EEPROM page sizing
+#    endif
+#endif
+
+#if STM32_ONBOARD_EEPROM_SIZE > 128
+#    pragma message("Please note: resetting EEPROM using an STM32L0/L1 device takes up to 1 second for every 1kB of internal EEPROM used.")
+#endif

drivers/oled/oled_driver.c

@@ -108,6 +108,9 @@ bool            oled_active         = false;
 bool            oled_scrolling      = false;
 uint8_t         oled_rotation       = 0;
 uint8_t         oled_rotation_width = 0;
+uint8_t         oled_scroll_speed   = 0;  // this holds the speed after being remapped to ssd1306 internal values
+uint8_t         oled_scroll_start   = 0;
+uint8_t         oled_scroll_end     = 7;
 #if OLED_TIMEOUT > 0
 uint32_t oled_timeout;
 #endif
@@ -515,12 +518,37 @@ bool oled_off(void) {
     return !oled_active;
 }
 
+// Set the specific 8 lines rows of the screen to scroll.
+// 0 is the default for start, and 7 for end, which is the entire
+// height of the screen.  For 128x32 screens, rows 4-7 are not used.
+void oled_scroll_set_area(uint8_t start_line, uint8_t end_line) {
+    oled_scroll_start = start_line;
+    oled_scroll_end   = end_line;
+}
+
+void oled_scroll_set_speed(uint8_t speed) {
+    // Sets the speed for scrolling... does not take effect
+    // until scrolling is either started or restarted
+    // the ssd1306 supports 8 speeds
+    // FrameRate2   speed = 7
+    // FrameRate3   speed = 4
+    // FrameRate4   speed = 5
+    // FrameRate5   speed = 0
+    // FrameRate25  speed = 6
+    // FrameRate64  speed = 1
+    // FrameRate128 speed = 2
+    // FrameRate256 speed = 3
+    // for ease of use these are remaped here to be in order
+    static const uint8_t scroll_remap[8] = {7, 4, 5, 0, 6, 1, 2, 3};
+    oled_scroll_speed                    = scroll_remap[speed];
+}
+
 bool oled_scroll_right(void) {
     // Dont enable scrolling if we need to update the display
     // This prevents scrolling of bad data from starting the scroll too early after init
     if (!oled_dirty && !oled_scrolling) {
-        static const uint8_t PROGMEM display_scroll_right[] = {I2C_CMD, SCROLL_RIGHT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL};
-        if (I2C_TRANSMIT_P(display_scroll_right) != I2C_STATUS_SUCCESS) {
+        uint8_t display_scroll_right[] = {I2C_CMD, SCROLL_RIGHT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
+        if (I2C_TRANSMIT(display_scroll_right) != I2C_STATUS_SUCCESS) {
             print("oled_scroll_right cmd failed\n");
             return oled_scrolling;
         }
@@ -533,8 +561,8 @@ bool oled_scroll_left(void) {
     // Dont enable scrolling if we need to update the display
     // This prevents scrolling of bad data from starting the scroll too early after init
     if (!oled_dirty && !oled_scrolling) {
-        static const uint8_t PROGMEM display_scroll_left[] = {I2C_CMD, SCROLL_LEFT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL};
-        if (I2C_TRANSMIT_P(display_scroll_left) != I2C_STATUS_SUCCESS) {
+        uint8_t display_scroll_left[] = {I2C_CMD, SCROLL_LEFT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
+        if (I2C_TRANSMIT(display_scroll_left) != I2C_STATUS_SUCCESS) {
             print("oled_scroll_left cmd failed\n");
             return oled_scrolling;
         }

drivers/oled/oled_driver.h

@@ -246,6 +246,18 @@ void oled_task(void);
 // Called at the start of oled_task, weak function overridable by the user
 void oled_task_user(void);
 
+// Set the specific 8 lines rows of the screen to scroll.
+// 0 is the default for start, and 7 for end, which is the entire
+// height of the screen.  For 128x32 screens, rows 4-7 are not used.
+void oled_scroll_set_area(uint8_t start_line, uint8_t end_line);
+
+// Sets scroll speed, 0-7, fastest to slowest. Default is three.
+// Does not take effect until scrolling is either started or restarted
+// the ssd1306 supports 8 speeds with the delay
+// listed below betwen each frame of the scrolling effect
+// 0=2, 1=3, 2=4, 3=5, 4=25, 5=64, 6=128, 7=256
+void oled_scroll_set_speed(uint8_t speed);
+
 // Scrolls the entire display right
 // Returns true if the screen was scrolling or starts scrolling
 // NOTE: display contents cannot be changed while scrolling

keyboards/abacus/abacus.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 nickolaij
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "abacus.h"

keyboards/abacus/abacus.h

@@ -0,0 +1,41 @@
+/* Copyright 2020 nickolaij
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+#define XXX KC_NO
+
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a,    k0b, \
+    k10,  k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,   k1b, \
+    k20,    k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+    k30,  k31, k32, k33,         k34,          k35, k36, k37, k38  \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+    { k30, k31, k32, k33, XXX, XXX, k34, XXX, k35, k36, k37, k38}   \
+}

keyboards/abacus/config.h

@@ -0,0 +1,133 @@
+/*
+Copyright 2020 nickolaij
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER nickolaij
+#define PRODUCT abacus
+#define DESCRIPTION A first attempt at a custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D3, D2, D4, C6 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, D7, B3, E6, B2, B4, B6, B5}
+#define UNUSED_PINS {B0}
+
+#define DIP_SWITCH_PINS { D0 }
+
+#define ENCODERS_PAD_A { F1 }
+#define ENCODERS_PAD_B { F0 }
+#define ENCODER_RESOLUTION 4
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+#define RGB_DI_PIN D1
+
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 17
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== choose animations ==*/
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#    define RGBLIGHT_EFFECT_SNAKE
+#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+#endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/abacus/info.json

@@ -0,0 +1,62 @@
+{
+    "keyboard_name": "Abacus",
+    "url": "https://www.github.com/nickolaij",
+    "maintainer": "nickolaij",
+    "width": 12.75,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 45,
+            "layout": [
+                {"label":"k00", "x":0, "y":0, "w":1},
+                {"label":"k01", "x":1, "y":0, "w":1},
+                {"label":"k02", "x":2, "y":0, "w":1},
+                {"label":"k03", "x":3, "y":0, "w":1},
+                {"label":"k04", "x":4, "y":0, "w":1},
+                {"label":"k05", "x":5, "y":0, "w":1},
+                {"label":"k06", "x":6, "y":0, "w":1},
+                {"label":"k07", "x":7, "y":0, "w":1},
+                {"label":"k08", "x":8, "y":0, "w":1},
+                {"label":"k09", "x":9, "y":0, "w":1},
+                {"label":"k0a", "x":10, "y":0, "w":1},
+                {"label":"k0b", "x":11, "y":0, "w":1.75},
+
+                {"label":"k10", "x":0, "y":1, "w":1.25},
+                {"label":"k11", "x":1.25, "y":1, "w":1},
+                {"label":"k12", "x":2.25, "y":1, "w":1},
+                {"label":"k13", "x":3.25, "y":1, "w":1},
+                {"label":"k14", "x":4.25, "y":1, "w":1},
+                {"label":"k15", "x":5.25, "y":1, "w":1},
+                {"label":"k16", "x":6.25, "y":1, "w":1},
+                {"label":"k17", "x":7.25, "y":1, "w":1},
+                {"label":"k18", "x":8.25, "y":1, "w":1},
+                {"label":"k19", "x":9.25, "y":1, "w":1},
+                {"label":"k1a", "x":10.25, "y":1, "w":1},
+                {"label":"k1b", "x":11.25, "y":1, "w":1.5},
+
+                {"label":"k20", "x":0, "y":2, "w":1.75},
+                {"label":"k21", "x":1.75, "y":2, "w":1},
+                {"label":"k22", "x":2.75, "y":2, "w":1},
+                {"label":"k23", "x":3.75, "y":2, "w":1},
+                {"label":"k24", "x":4.75, "y":2, "w":1},
+                {"label":"k25", "x":5.75, "y":2, "w":1},
+                {"label":"k26", "x":6.75, "y":2, "w":1},
+                {"label":"k27", "x":7.75, "y":2, "w":1},
+                {"label":"k28", "x":8.75, "y":2, "w":1},
+                {"label":"k29", "x":9.75, "y":2, "w":1},
+                {"label":"k2a", "x":10.75, "y":2, "w":1},
+                {"label":"k2b", "x":11.75, "y":2, "w":1},
+
+                {"label":"k30", "x":0, "y":3, "w":1.25},
+                {"label":"k31", "x":1.25, "y":3, "w":1},
+                {"label":"k32", "x":2.25, "y":3, "w":1},
+                {"label":"k33", "x":3.25, "y":3, "w":2.75},
+                {"label":"k34", "x":6, "y":3, "w":2.75},
+                {"label":"k35", "x":8.75, "y":3, "w":1},
+                {"label":"k36", "x":9.75, "y":3, "w":1},
+                {"label":"k37", "x":10.75, "y":3, "w":1},
+                {"label":"k38", "x":11.75, "y":3, "w":1}
+            ]
+        }
+    }
+}

keyboards/abacus/keymaps/default/keymap.c

@@ -0,0 +1,148 @@
+/* Copyright 2020 nickolaij
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// wait DELAY ms before unregistering media keys
+#define MEDIA_KEY_DELAY 10
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _UPPER,
+    _LOWER
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    NICKURL = SAFE_RANGE,
+    ALTTAB
+};
+
+enum unicode_names {
+    LOVEEYES,
+    THINK,
+    UPSIDEDOWN,
+    NOMOUTH,
+    PARTY,
+    HEART,
+    EGGPLANT,
+    PEACH,
+    EMOJI100,
+    EMOJIB
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+    [LOVEEYES]  = 0x1f60d,
+    [THINK] = 0x1f914,
+    [UPSIDEDOWN] = 0x1f643,
+    [NOMOUTH] = 0x1f636,
+    [PARTY]  = 0x1f973,
+    [HEART] = 0x1f495,
+    [EMOJI100] = 0x1f4af,
+    [PEACH] = 0x1f351,
+    [EGGPLANT] = 0x1f346,
+    [EMOJIB] = 0x1f171
+};
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_ESCAPE, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPACE,
+        KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_BSLASH,
+        KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_UP, KC_DELETE,
+        KC_LCTRL, KC_LGUI, MO(_UPPER), KC_SPACE, KC_ENTER, MO(_LOWER), KC_LEFT, KC_DOWN, KC_RIGHT
+    ),
+    [_UPPER] = LAYOUT(
+        KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
+        ALTTAB, _______, _______, _______, _______, _______, _______, _______, KC_LBRACKET, KC_RBRACKET, KC_QUOTE, KC_SLASH,
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_MINUS, KC_EQUAL, _______, _______,
+        KC_LALT, _______, _______, _______, _______, _______, KC_HOME, _______, KC_END
+    ),
+    [_LOWER] = LAYOUT(
+        NICKURL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______,
+        _______, KC_F11, KC_F12, RGB_MODE_PLAIN, RGB_MODE_BREATHE, RGB_MODE_RAINBOW, RGB_MODE_SWIRL, RGB_MODE_SNAKE, RGB_MODE_KNIGHT, RGB_MODE_GRADIENT, XXXXXXX, RGB_TOG, 
+        _______, X(LOVEEYES), X(THINK), X(UPSIDEDOWN), X(NOMOUTH), X(PARTY), X(PEACH), X(HEART), X(EGGPLANT), X(EMOJI100), X(EMOJIB), RGB_HUI,
+        KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______
+    )
+ 
+ 
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case NICKURL:
+            if (record->event.pressed) {
+                SEND_STRING("https://www.github.com/nickolaij");
+            } else {
+                tap_code(KC_ENTER);
+            }
+            return true;
+            break;
+        
+        case ALTTAB:
+            if (record->event.pressed) {
+                tap_code16(A(KC_TAB));
+            }
+            return true;
+            break;
+
+        default:
+            return true;
+
+    }
+}
+
+
+void dip_switch_update_user(uint8_t index, bool active) { 
+    switch (index) {
+        case 0:
+            if(active) {
+                switch(get_highest_layer(layer_state)) {
+                case _BASE:
+                    tap_code16(LCTL(KC_F));
+                    break;
+                case _UPPER:
+                    tap_code(KC_MUTE);
+                    break;
+                case _LOWER:
+                    tap_code(KC_MEDIA_PLAY_PAUSE);
+                    break;
+                }
+        }
+    }
+}
+
+
+void matrix_init_user(void) {
+    set_unicode_input_mode(UC_WINC);
+}
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+
+    switch(get_highest_layer(layer_state)) {
+        case _BASE:
+            clockwise ? tap_code(KC_PGDN) : tap_code(KC_PGUP);
+            break;
+        case _UPPER:
+            clockwise ? tap_code(KC_VOLU) : tap_code(KC_VOLD);
+            break;
+        case _LOWER:
+            clockwise ? tap_code(KC_MEDIA_NEXT_TRACK) : tap_code(KC_MEDIA_PREV_TRACK);
+            break;
+        }
+}

keyboards/abacus/keymaps/default/readme.md

@@ -0,0 +1,4 @@
+# The default keymap for Abacus
+
+This is made based on my first few days of playing with it and honing in on what feels right.
+I've repurposed the DIP switch function for the encoder switches and added some functionality for multiple layers also effecting the encoders output.

keyboards/abacus/readme.md

@@ -0,0 +1,15 @@
+# Abacus
+
+![abacus](https://i.imgur.com/IFtuWaK.jpg)
+
+A first attempt at a PCB design for a mechanical keyboard. Includes rotary encoder and RGB underglow.
+
+* Keyboard Maintainer: [nickolaij](https://github.com/nickolaij)
+* Hardware Supported: Abacus PCB, [Elite C Microcontroller](https://keeb.io/products/elite-c-usb-c-pro-micro-replacement-arduino-compatible-atmega32u4) or Pro Micro Microcontroller (Elite C has additional pins for encoder)
+* Hardware Availability: [Abacus PCB Github](https://github.com/nickolaij/Abacus_Rev2)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make abacus:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/abacus/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+UNICODEMAP_ENABLE = yes
+ENCODER_ENABLE = yes
+DIP_SWITCH_ENABLE = yes
+LTO_ENABLE = yes

keyboards/ai03/equinox/keymaps/proto_via/keymap.c

@@ -1,49 +0,0 @@
-/* Copyright 2019 Ryota Goto
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-/*
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
-    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
-    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
-    K300, K301, K302,     K304,       K306,       K308,   K309, K310, K311  \
-*/
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_all( /* Base */
-    MO(2),   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, 
-    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT, 
-    KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT, 
-    KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,       KC_SPC,      KC_GRV,  KC_RGUI, KC_DEL
-  ),
-  [1] = LAYOUT_all( /* Extra Keys */
-    _______, _______, KC_PGUP, _______, _______, KC_LBRC, KC_RBRC, _______, KC_UP,   _______, _______, _______, 
-    _______, KC_HOME, KC_PGDN, KC_END,  _______, KC_BSLS, KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, 
-    _______, _______, _______, _______, _______, KC_PSCR, KC_ESC,  KC_QUOT, _______, KC_DOT,  _______, _______, 
-    _______, _______, _______,          _______,          _______,     _______,      _______, _______, _______
-  ),
-  [2] = LAYOUT_all( /* Num and FN */
-    _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, 
-    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   _______, _______, _______, _______, _______, 
-    _______, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, _______, 
-    _______, _______, _______,          _______,          _______,     _______,      _______, _______, _______
-  ),
-  [3] = LAYOUT_all( /* Other */
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
-    _______, _______, _______,          _______,          _______,     _______,      _______, _______, _______
-  )
-};

keyboards/ai03/equinox/keymaps/proto_via/readme.md

@@ -1,4 +0,0 @@
-# The proto via keymap for equinox
-
-Has the necessary tweaks to run on early prototype PCBs.  
-Not to be used for production run PCBs.  

keyboards/ai03/equinox/keymaps/proto_via/rules.mk

@@ -1,5 +0,0 @@
-VIA_ENABLE = yes
-
-# Fix for prototype missing COL0, COL1, using backlight and RGB underglow I/O pins
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow

keyboards/ai03/equinox/rev0/config.h

@@ -21,3 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #undef MATRIX_COL_PINS
 #define MATRIX_COL_PINS { C4, B7, C6, C7, B6, B5, B4, B3, B2, B1, B0, D6 }
 
+// This directs backlight code to use a disconnected pin, so the firwmare still has
+// backlight code and VIA support even though it doesn't do anything.
+#undef BACKLIGHT_PIN
+#define BACKLIGHT_PIN D1

keyboards/ai03/equinox/rev0/rules.mk

@@ -0,0 +1 @@
+# Dummy rules.mk, rev0 uses parent rules.mk as is

keyboards/ai03/equinox/rev1/config.h

@@ -1,8 +1,5 @@
 /*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2019 Ryota Goto
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -19,5 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #pragma once
-
-#define USE_I2C

keyboards/ai03/equinox/rev1/rules.mk

@@ -0,0 +1 @@
+# Dummy rules.mk, rev1 uses parent rules.mk as is

keyboards/ares/config.h

@@ -42,8 +42,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLIGHT_ANIMATIONS
 
-#define NO_UART 1
-
 /* key combination for magic key command */
 /* defined by default; to change, uncomment and set to the combination you want */
 // #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/bfake/config.h

@@ -41,5 +41,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_LEVELS 3
 
 #define RGBLIGHT_ANIMATIONS
-
-#define NO_UART 1

keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -1,268 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-#include "stm32_gpio.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types.                                         */
-/*===========================================================================*/
-
-/**
- * @brief   Type of STM32 GPIO port setup.
- */
-typedef struct {
-  uint32_t              moder;
-  uint32_t              otyper;
-  uint32_t              ospeedr;
-  uint32_t              pupdr;
-  uint32_t              odr;
-  uint32_t              afrl;
-  uint32_t              afrh;
-} gpio_setup_t;
-
-/**
- * @brief   Type of STM32 GPIO initialization data.
- */
-typedef struct {
-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
-  gpio_setup_t          PAData;
-#endif
-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
-  gpio_setup_t          PBData;
-#endif
-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
-  gpio_setup_t          PCData;
-#endif
-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
-  gpio_setup_t          PDData;
-#endif
-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
-  gpio_setup_t          PEData;
-#endif
-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
-  gpio_setup_t          PFData;
-#endif
-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
-  gpio_setup_t          PGData;
-#endif
-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
-  gpio_setup_t          PHData;
-#endif
-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
-  gpio_setup_t          PIData;
-#endif
-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
-  gpio_setup_t          PJData;
-#endif
-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
-  gpio_setup_t          PKData;
-#endif
-} gpio_config_t;
-
-/**
- * @brief   STM32 GPIO static initialization data.
- */
-static const gpio_config_t gpio_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH},
-#endif
-#if STM32_HAS_GPIOJ
-  {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
-   VAL_GPIOJ_ODR,   VAL_GPIOJ_AFRL,   VAL_GPIOJ_AFRH},
-#endif
-#if STM32_HAS_GPIOK
-  {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
-   VAL_GPIOK_ODR,   VAL_GPIOK_AFRL,   VAL_GPIOK_AFRH}
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
-
-  gpiop->OTYPER  = config->otyper;
-  gpiop->OSPEEDR = config->ospeedr;
-  gpiop->PUPDR   = config->pupdr;
-  gpiop->ODR     = config->odr;
-  gpiop->AFRL    = config->afrl;
-  gpiop->AFRH    = config->afrh;
-  gpiop->MODER   = config->moder;
-}
-
-static void stm32_gpio_init(void) {
-
-  /* Enabling GPIO-related clocks, the mask comes from the
-     registry header file.*/
-  rccResetAHB(STM32_GPIO_EN_MASK);
-  rccEnableAHB(STM32_GPIO_EN_MASK, true);
-
-  /* Initializing all the defined GPIO ports.*/
-#if STM32_HAS_GPIOA
-  gpio_init(GPIOA, &gpio_default_config.PAData);
-#endif
-#if STM32_HAS_GPIOB
-  gpio_init(GPIOB, &gpio_default_config.PBData);
-#endif
-#if STM32_HAS_GPIOC
-  gpio_init(GPIOC, &gpio_default_config.PCData);
-#endif
-#if STM32_HAS_GPIOD
-  gpio_init(GPIOD, &gpio_default_config.PDData);
-#endif
-#if STM32_HAS_GPIOE
-  gpio_init(GPIOE, &gpio_default_config.PEData);
-#endif
-#if STM32_HAS_GPIOF
-  gpio_init(GPIOF, &gpio_default_config.PFData);
-#endif
-#if STM32_HAS_GPIOG
-  gpio_init(GPIOG, &gpio_default_config.PGData);
-#endif
-#if STM32_HAS_GPIOH
-  gpio_init(GPIOH, &gpio_default_config.PHData);
-#endif
-#if STM32_HAS_GPIOI
-  gpio_init(GPIOI, &gpio_default_config.PIData);
-#endif
-#if STM32_HAS_GPIOJ
-  gpio_init(GPIOJ, &gpio_default_config.PJData);
-#endif
-#if STM32_HAS_GPIOK
-  gpio_init(GPIOK, &gpio_default_config.PKData);
-#endif
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-/**
- * @brief   Early initialization code.
- * @details GPIO ports and system clocks are initialized before everything
- *          else.
- */
-void __early_init(void) {
-  extern void enter_bootloader_mode_if_requested(void);
-  enter_bootloader_mode_if_requested();
-  stm32_gpio_init();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-  SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
-  SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
-}

keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -1,923 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*
- * Setup for ST STM32F072B-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F072B_DISCOVERY
-#define BOARD_NAME                  "ST STM32F072B-Discovery"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK                0U
-#endif
-
-#define STM32_LSEDRV                (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK                0U
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F072xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON                0U
-#define GPIOA_PIN1                  1U
-#define GPIOA_PIN2                  2U
-#define GPIOA_PIN3                  3U
-#define GPIOA_PIN4                  4U
-#define GPIOA_PIN5                  5U
-#define GPIOA_PIN6                  6U
-#define GPIOA_PIN7                  7U
-#define GPIOA_PIN8                  8U
-#define GPIOA_PIN9                  9U
-#define GPIOA_PIN10                 10U
-#define GPIOA_USB_DM                11U
-#define GPIOA_USB_DP                12U
-#define GPIOA_SWDIO                 13U
-#define GPIOA_SWCLK                 14U
-#define GPIOA_PIN15                 15U
-
-#define GPIOB_PIN0                  0U
-#define GPIOB_PIN1                  1U
-#define GPIOB_PIN2                  2U
-#define GPIOB_PIN3                  3U
-#define GPIOB_PIN4                  4U
-#define GPIOB_PIN5                  5U
-#define GPIOB_PIN6                  6U
-#define GPIOB_PIN7                  7U
-#define GPIOB_PIN8                  8U
-#define GPIOB_PIN9                  9U
-#define GPIOB_PIN10                 10U
-#define GPIOB_PIN11                 11U
-#define GPIOB_PIN12                 12U
-#define GPIOB_SPI2_SCK              13U
-#define GPIOB_SPI2_MISO             14U
-#define GPIOB_SPI2_MOSI             15U
-
-#define GPIOC_MEMS_CS               0U
-#define GPIOC_PIN1                  1U
-#define GPIOC_PIN2                  2U
-#define GPIOC_PIN3                  3U
-#define GPIOC_PIN4                  4U
-#define GPIOC_PIN5                  5U
-#define GPIOC_LED_RED               6U
-#define GPIOC_LED_BLUE              7U
-#define GPIOC_LED_ORANGE            8U
-#define GPIOC_LED_GREEN             9U
-#define GPIOC_PIN10                 10U
-#define GPIOC_PIN11                 11U
-#define GPIOC_PIN12                 12U
-#define GPIOC_PIN13                 13U
-#define GPIOC_OSC32_IN              14U
-#define GPIOC_OSC32_OUT             15U
-
-#define GPIOD_PIN0                  0U
-#define GPIOD_PIN1                  1U
-#define GPIOD_PIN2                  2U
-#define GPIOD_PIN3                  3U
-#define GPIOD_PIN4                  4U
-#define GPIOD_PIN5                  5U
-#define GPIOD_PIN6                  6U
-#define GPIOD_PIN7                  7U
-#define GPIOD_PIN8                  8U
-#define GPIOD_PIN9                  9U
-#define GPIOD_PIN10                 10U
-#define GPIOD_PIN11                 11U
-#define GPIOD_PIN12                 12U
-#define GPIOD_PIN13                 13U
-#define GPIOD_PIN14                 14U
-#define GPIOD_PIN15                 15U
-
-#define GPIOE_PIN0                  0U
-#define GPIOE_PIN1                  1U
-#define GPIOE_PIN2                  2U
-#define GPIOE_PIN3                  3U
-#define GPIOE_PIN4                  4U
-#define GPIOE_PIN5                  5U
-#define GPIOE_PIN6                  6U
-#define GPIOE_PIN7                  7U
-#define GPIOE_PIN8                  8U
-#define GPIOE_PIN9                  9U
-#define GPIOE_PIN10                 10U
-#define GPIOE_PIN11                 11U
-#define GPIOE_PIN12                 12U
-#define GPIOE_PIN13                 13U
-#define GPIOE_PIN14                 14U
-#define GPIOE_PIN15                 15U
-
-#define GPIOF_OSC_IN                0U
-#define GPIOF_OSC_OUT               1U
-#define GPIOF_PIN2                  2U
-#define GPIOF_PIN3                  3U
-#define GPIOF_PIN4                  4U
-#define GPIOF_PIN5                  5U
-#define GPIOF_PIN6                  6U
-#define GPIOF_PIN7                  7U
-#define GPIOF_PIN8                  8U
-#define GPIOF_PIN9                  9U
-#define GPIOF_PIN10                 10U
-#define GPIOF_PIN11                 11U
-#define GPIOF_PIN12                 12U
-#define GPIOF_PIN13                 13U
-#define GPIOF_PIN14                 14U
-#define GPIOF_PIN15                 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
-#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-
-#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
-#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
-#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
-
-#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
-#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
-#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
-#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
-#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
-#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
-
-
-
-#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
-#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
-#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
-#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
-#define PIN_ODR_LOW(n)              (0U << (n))
-#define PIN_ODR_HIGH(n)             (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
-#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
-#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
-#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
-#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
-#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
-#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
-#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
-#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - PIN4                      (input pullup).
- * PA5  - PIN5                      (input pullup).
- * PA6  - PIN6                      (input pullup).
- * PA7  - PIN7                      (input pullup).
- * PA8  - PIN8                      (input pullup).
- * PA9  - PIN9                      (input pullup).
- * PA10 - PIN10                     (input pullup).
- * PA11 - USB_DM                    (input floating).
- * PA12 - USB_DP                    (input floating).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
-                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
-                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
-                                     PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
-                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
-                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
-                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
-                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
-                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
-                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
-                                     PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
-#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
-
-/*
- * GPIOB setup:
- *
- * PB0  - PIN0                      (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - PIN3                      (input pullup).
- * PB4  - PIN4                      (input pullup).
- * PB5  - PIN5                      (input pullup).
- * PB6  - PIN6                      (input pullup).
- * PB7  - PIN7                      (input pullup).
- * PB8  - PIN8                      (input pullup).
- * PB9  - PIN9                      (input pullup).
- * PB10 - PIN10                     (input pullup).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - SPI2_SCK                  (alternate 0).
- * PB14 - SPI2_MISO                 (alternate 0).
- * PB15 - SPI2_MOSI                 (alternate 0).
- */
-#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
-#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
-
-/*
- * GPIOC setup:
- *
- * PC0  - MEMS_CS                   (output pushpull maximum).
- * PC1  - PIN1                      (input pullup).
- * PC2  - PIN2                      (input pullup).
- * PC3  - PIN3                      (input pullup).
- * PC4  - PIN4                      (input pullup).
- * PC5  - PIN5                      (input pullup).
- * PC6  - LED_RED                   (output pushpull maximum).
- * PC7  - LED_BLUE                  (output pushpull maximum).
- * PC8  - LED_ORANGE                (output pushpull maximum).
- * PC9  - LED_GREEN                 (output pushpull maximum).
- * PC10 - PIN10                     (input pullup).
- * PC11 - PIN11                     (input pullup).
- * PC12 - PIN12                     (input pullup).
- * PC13 - PIN13                     (input pullup).
- * PC14 - OSC32_IN                  (input floating).
- * PC15 - OSC32_OUT                 (input floating).
- */
-#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
-                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
-                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
-                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
-                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
-                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
-                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
-                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
-                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
-#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
-                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
-                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
-                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
-
-/*
- * GPIOD setup:
- *
- * PD0  - PIN0                      (input pullup).
- * PD1  - PIN1                      (input pullup).
- * PD2  - PIN2                      (input pullup).
- * PD3  - PIN3                      (input pullup).
- * PD4  - PIN4                      (input pullup).
- * PD5  - PIN5                      (input pullup).
- * PD6  - PIN6                      (input pullup).
- * PD7  - PIN7                      (input pullup).
- * PD8  - PIN8                      (input pullup).
- * PD9  - PIN9                      (input pullup).
- * PD10 - PIN10                     (input pullup).
- * PD11 - PIN11                     (input pullup).
- * PD12 - PIN12                     (input pullup).
- * PD13 - PIN13                     (input pullup).
- * PD14 - PIN14                     (input pullup).
- * PD15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
-#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
-
-/*
- * GPIOE setup:
- *
- * PE0  - PIN0                      (input pullup).
- * PE1  - PIN1                      (input pullup).
- * PE2  - PIN2                      (input pullup).
- * PE3  - PIN3                      (input pullup).
- * PE4  - PIN4                      (input pullup).
- * PE5  - PIN5                      (input pullup).
- * PE6  - PIN6                      (input pullup).
- * PE7  - PIN7                      (input pullup).
- * PE8  - PIN8                      (input pullup).
- * PE9  - PIN9                      (input pullup).
- * PE10 - PIN10                     (input pullup).
- * PE11 - PIN11                     (input pullup).
- * PE12 - PIN12                     (input pullup).
- * PE13 - PIN13                     (input pullup).
- * PE14 - PIN14                     (input pullup).
- * PE15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
-#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
-
-/*
- * GPIOF setup:
- *
- * PF0  - OSC_IN                    (input floating).
- * PF1  - OSC_OUT                   (input floating).
- * PF2  - PIN2                      (input pullup).
- * PF3  - PIN3                      (input pullup).
- * PF4  - PIN4                      (input pullup).
- * PF5  - PIN5                      (input pullup).
- * PF6  - PIN6                      (input pullup).
- * PF7  - PIN7                      (input pullup).
- * PF8  - PIN8                      (input pullup).
- * PF9  - PIN9                      (input pullup).
- * PF10 - PIN10                     (input pullup).
- * PF11 - PIN11                     (input pullup).
- * PF12 - PIN12                     (input pullup).
- * PF13 - PIN13                     (input pullup).
- * PF14 - PIN14                     (input pullup).
- * PF15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
-                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
-                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
-                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
-                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
-                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
-                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
-                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
-#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* BOARD_H */

keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/candybar/lefty/info.json

@@ -6,13 +6,6 @@
     "height": 4,
     "layouts": {
         "LAYOUT": {
-            "layout": [
-				{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Del", "x":11, "y":0}, {"label":"BkSp", "x":12, "y":0}, {"label":"7", "x":13, "y":0}, {"label":"8", "x":14, "y":0}, {"label":"9", "x":15, "y":0}, {"label":"*", "x":16, "y":0},
-				{"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"4", "x":13, "y":1}, {"label":"5", "x":14, "y":1}, {"label":"6", "x":15, "y":1}, {"label":"-", "x":16, "y":1},
-				{"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"Shift", "x":10.75, "y":2, "w":1.25}, {"label":"&uarr;", "x":12, "y":2}, {"label":"1", "x":13, "y":2}, {"label":"2", "x":14, "y":2}, {"label":"3", "x":15, "y":2}, {"label":"+", "x":16, "y":2},
-				{"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"GUI", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1}, {"label":"Backspace", "x":6.5, "y":3, "w":2.25}, {"label":"Menu", "x":8.75, "y":3, "w":1.25}, {"label":"Fn", "x":10, "y":3}, {"label":"&larr;", "x":11, "y":3}, {"label":"&darr;", "x":12, "y":3}, {"label":"&rarr;", "x":13, "y":3}, {"label":"0", "x":14, "y":3}, {"label":".", "x":15, "y":3}, {"label":"Enter", "x":16, "y":3}]
-        },
-        "LAYOUT_lefty": {
             "layout": [
                 {"label":"7", "x":0, "y":0}, {"label":"8", "x":1, "y":0}, {"label":"9", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"Esc", "x":4, "y":0}, {"label":"Q", "x":5, "y":0}, {"label":"W", "x":6, "y":0}, {"label":"E", "x":7, "y":0}, {"label":"R", "x":8, "y":0}, {"label":"T", "x":9, "y":0}, {"label":"Y", "x":10, "y":0}, {"label":"U", "x":11, "y":0}, {"label":"I", "x":12, "y":0}, {"label":"O", "x":13, "y":0}, {"label":"P", "x":14, "y":0}, {"label":"{", "x":15, "y":0}, {"label":"}", "x":16, "y":0},
                 {"label":"4", "x":0, "y":1}, {"label":"5", "x":1, "y":1}, {"label":"6", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"Tab", "x":4, "y":1, "w":1.25}, {"label":"A", "x":5.25, "y":1}, {"label":"S", "x":6.25, "y":1}, {"label":"D", "x":7.25, "y":1}, {"label":"F", "x":8.25, "y":1}, {"label":"G", "x":9.25, "y":1}, {"label":"H", "x":10.25, "y":1}, {"label":"J", "x":11.25, "y":1}, {"label":"K", "x":12.25, "y":1}, {"label":"L", "x":13.25, "y":1}, {"label":":", "x":14.25, "y":1}, {"label":"Enter", "x":15.25, "y":1, "w":1.75},

keyboards/candybar/lefty/keymaps/default/keymap.c

@@ -22,7 +22,7 @@
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _BL: Base Layer (Default Layer)
    */
-[_BL] = LAYOUT_lefty(
+[_BL] = LAYOUT(
   KC_P7  , KC_P8, KC_P9  , KC_PAST, KC_ESC , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_O   , KC_P   , KC_DEL , KC_BSPC , \
   KC_P4  , KC_P5, KC_P6  , KC_PMNS, KC_TAB , KC_A   , KC_S   , KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_SCLN,          KC_ENT  , \
   KC_P1  , KC_P2, KC_P3  , KC_PPLS, KC_LSFT,          KC_Z   , KC_X, KC_C   , KC_V  , KC_B, KC_N   , KC_M   , KC_COMM, KC_DOT , KC_UP   ,KC_RSFT , \
@@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Keymap _FL: Function Layer
   */
-  [_FL] = LAYOUT_lefty(
+  [_FL] = LAYOUT(
   KC_P7 , KC_P8, KC_P9  , KC_VOLU, RESET  , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
   KC_P4 , KC_P5, KC_P6  , KC_VOLD, KC_TAB , KC_A   , KC_SLCK, KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_QUOT,          KC_BSLS , \
   KC_P1 , KC_P2, KC_P3  , KC_PEQL, KC_LSFT,          KC_Z   , KC_X, KC_CAPS, KC_V  , KC_B, KC_NLCK, KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \

keyboards/candybar/lefty/lefty.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "candybar.h"
+#include "lefty.h"
 
 void matrix_init_kb(void) {
   matrix_init_user();

keyboards/candybar/lefty/lefty.h

@@ -17,19 +17,8 @@
 #pragma once
 #include "quantum.h"
 
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, k1d, k1e, k1f, k1g, \
-    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
-    k30, k31, k32,           k35,      k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g \
-) { \
-    { k00, k01  , k02, k03  , k04  , k05, k06  , k07, k08, k09, k0a, k0b  , k0c, k0d, k0e, k0f, k0g }  , \
-    { k10, k11  , k12, k13  , k14  , k15, k16  , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g }  , \
-    { k20, KC_NO, k22, k23  , k24  , k25, k26  , k27, k28, k29, k2a, k2b  , k2c, k2d, k2e, k2f, k2g }  , \
-    { k30, k31  , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b  , k3c, k3d, k3e, k3f, k3g } \
-}
 
-#define LAYOUT_lefty( \
+#define LAYOUT( \
     k0d, k0e, k0f, k0g, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
     k1d, k1e, k1f, k1g, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
     k2d, k2e, k2f, k2g, k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
@@ -40,5 +29,3 @@
     { k20, KC_NO, k22, k23  , k24  , k25, k26  , k27, k28, k29, k2a, k2b  , k2c, k2d, k2e, k2f, k2g }  , \
     { k30, k31  , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b  , k3c, k3d, k3e, k3f, k3g } \
 }
-
-#define LAYOUT_righty LAYOUT

keyboards/candybar/lefty/readme.md

@@ -0,0 +1,15 @@
+# The Key Company Candybar
+
+![Candybar](https://cdn.shopify.com/s/files/1/1679/2319/articles/CandyBar_Promo_400x225_1000x.jpg?v=1538150501)
+
+The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
+
+* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
+* Hardware Supported: TKC Candybar
+* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make candybar/lefty:default:dfu-util
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/candybar/lefty/rules.mk

@@ -1,6 +1,5 @@
 # MCU name
 MCU = STM32F072
-BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/candybar/readme.md

@@ -1,18 +0,0 @@
-The Key Company Candybar
-===
-
-![Candybar](https://cdn.shopify.com/s/files/1/1679/2319/articles/CandyBar_Promo_400x225_1000x.jpg?v=1538150501)
-
-
-The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
-
-Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)  
-Hardware Supported: TKC Candybar 
-Hardware Availability: Via GB  
-
-
-Make example for this keyboard (after setting up your build environment):
-
-    make candybar:default:dfu-util
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/candybar/righty/config.h

@@ -0,0 +1,115 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0006
+#define MANUFACTURER    The Key Company
+#define PRODUCT         Candybar
+#define DESCRIPTION     A compact staggered 40% keyboard with attached numpad
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 17
+#define DIODE_DIRECTION COL2ROW
+#define MATRIX_ROW_PINS { A8, A9, A10, A13 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 }
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+// #define WS2812_LED_N 2
+// #define RGBLED_NUM WS2812_LED_N
+// #define WS2812_TIM_N 2
+// #define WS2812_TIM_CH 2
+// #define PORT_WS2812     GPIOA
+// #define PIN_WS2812      1
+// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP

keyboards/candybar/righty/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "TKC Candybar",
+    "url": "",
+    "maintainer": "terrymathews",
+    "width": 17,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+				{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Del", "x":11, "y":0}, {"label":"BkSp", "x":12, "y":0}, {"label":"7", "x":13, "y":0}, {"label":"8", "x":14, "y":0}, {"label":"9", "x":15, "y":0}, {"label":"*", "x":16, "y":0},
+				{"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"4", "x":13, "y":1}, {"label":"5", "x":14, "y":1}, {"label":"6", "x":15, "y":1}, {"label":"-", "x":16, "y":1},
+				{"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"Shift", "x":10.75, "y":2, "w":1.25}, {"label":"&uarr;", "x":12, "y":2}, {"label":"1", "x":13, "y":2}, {"label":"2", "x":14, "y":2}, {"label":"3", "x":15, "y":2}, {"label":"+", "x":16, "y":2},
+				{"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"GUI", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1}, {"label":"Backspace", "x":6.5, "y":3, "w":2.25}, {"label":"Menu", "x":8.75, "y":3, "w":1.25}, {"label":"Fn", "x":10, "y":3}, {"label":"&larr;", "x":11, "y":3}, {"label":"&darr;", "x":12, "y":3}, {"label":"&rarr;", "x":13, "y":3}, {"label":"0", "x":14, "y":3}, {"label":".", "x":15, "y":3}, {"label":"Enter", "x":16, "y":3}]
+        }
+    }
+}

keyboards/candybar/righty/readme.md

@@ -0,0 +1,15 @@
+# The Key Company Candybar
+
+![Candybar](https://cdn.shopify.com/s/files/1/1679/2319/articles/CandyBar_Promo_400x225_1000x.jpg?v=1538150501)
+
+The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
+
+* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
+* Hardware Supported: TKC Candybar
+* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make candybar/righty:default:dfu-util
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/candybar/righty/righty.c

@@ -0,0 +1,17 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "righty.h"

keyboards/candybar/righty/righty.h

@@ -0,0 +1,30 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, k1d, k1e, k1f, k1g, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
+    k30, k31, k32,           k35,      k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g \
+) { \
+    { k00, k01  , k02, k03  , k04  , k05, k06  , k07, k08, k09, k0a, k0b  , k0c, k0d, k0e, k0f, k0g }  , \
+    { k10, k11  , k12, k13  , k14  , k15, k16  , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g }  , \
+    { k20, KC_NO, k22, k23  , k24  , k25, k26  , k27, k28, k29, k2a, k2b  , k2c, k2d, k2e, k2f, k2g }  , \
+    { k30, k31  , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b  , k3c, k3d, k3e, k3f, k3g } \
+}

keyboards/candybar/righty/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   comment out to disable the options.
+#
+# EXTRAFLAGS+=-flto
+LINK_TIME_OPTIMIZATION_ENABLE = yes
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no  # Console for debug
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+SERIAL_LINK_ENABLE = no
+
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/claw44/rev1/matrix.c

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -102,9 +102,10 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
-    TXLED0;
-    RXLED0;
+    setPinOutput(B0);
+    setPinOutput(D5);
+    writePinHigh(B0);
+    writePinHigh(D5);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -189,10 +190,10 @@ int serial_transaction(int master_changed) {
     int ret=serial_update_buffers();
 #endif
     if (ret ) {
-        if(ret==2) RXLED1;
+        if(ret==2) writePinLow(B0);
         return 1;
     }
-    RXLED0;
+    writePinHigh(B0);
     memcpy(&matrix[slaveOffset],
         (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH);
     return 0;
@@ -241,7 +242,7 @@ uint8_t matrix_master_scan(void) {
     if( serial_transaction(mchanged) ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -254,7 +255,7 @@ uint8_t matrix_master_scan(void) {
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

keyboards/coseyfannitutti/discipad/config.h

@@ -49,7 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define NO_UART 1
 #define USB_MAX_POWER_CONSUMPTION 100
 
 /*

keyboards/coseyfannitutti/discipline/config.h

@@ -47,7 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define NO_UART 1
 #define USB_MAX_POWER_CONSUMPTION 100
 
 /*

keyboards/coseyfannitutti/mysterium/config.h

@@ -47,8 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define NO_UART 1
-
 /*
  * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
  */

keyboards/crkbd/keymaps/ninjonas/config.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define TAPPING_TERM 300
+#define TAPPING_TERM 200
 
 #define MASTER_LEFT
 

keyboards/crkbd/keymaps/rpbaptist/config.h

@@ -25,88 +25,115 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Select hand configuration */
 #define EE_HANDS
 
-#undef SSD1306OLED
-
-#define USE_SERIAL_PD2
-
-#define FORCE_NKRO
-
-#define QMK_ESC_OUTPUT F4 // usually COL
-#define QMK_ESC_INPUT D4 // usually ROW
-#define QMK_LED B0
-
-#ifdef RGB_MATRIX_ENABLE
-  #define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
-  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
-
-  #define RGB_MATRIX_HUE_STEP 10
-  #define RGB_MATRIX_SAT_STEP 15
-  #define RGB_MATRIX_VAL_STEP 16
-  #define RGB_MATRIX_SPD_STEP 10
-
-  #define DISABLE_RGB_MATRIX_ALPHAS_MODS
-  #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-  #define DISABLE_RGB_MATRIX_BREATHING
-  #define DISABLE_RGB_MATRIX_BAND_SAT
-  #define DISABLE_RGB_MATRIX_BAND_VAL
-  #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-  #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-  #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-  #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-  // #define DISABLE_RGB_MATRIX_CYCLE_ALL
-  #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-  #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
-  #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
-  #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-  #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-  #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
-  #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
-  // #define DISABLE_RGB_MATRIX_DUAL_BEACON
-  #define DISABLE_RGB_MATRIX_RAINBOW_BEACON
-  #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-  #define DISABLE_RGB_MATRIX_RAINDROPS
-  #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-
-  #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-  // #define DISABLE_RGB_MATRIX_TYPING_HEATMAP
-  #define DISABLE_RGB_MATRIX_DIGITAL_RAIN
-
-  #define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
-
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-  // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-
-  // #define DISABLE_RGB_MATRIX_SPLASH
-  #define DISABLE_RGB_MATRIX_MULTISPLASH
-  #define DISABLE_RGB_MATRIX_SOLID_SPLASH
-  #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
-
-  #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_TYPING_HEATMAP
+#ifdef OLED_DRIVER_ENABLE
+#    undef SSD1306OLED
+#    define OLED_TIMEOUT 600000
 #endif
 
-#define TAPPING_TERM 150
-// #define PERMISSIVE_HOLD
+#undef USE_I2C
+#define USE_SERIAL_PD2
+
+// #define FORCE_NKRO
+
+#define QMK_ESC_OUTPUT F4  // usually COL
+#define QMK_ESC_INPUT D4   // usually ROW
+#define QMK_LED B0
+
+#define NO_ACTION_ONESHOT
+
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
+
+#    define RGB_MATRIX_HUE_STEP 8
+#    define RGB_MATRIX_SAT_STEP 12
+#    define RGB_MATRIX_VAL_STEP 10
+#    define RGB_MATRIX_SPD_STEP 10
+
+#    define DISABLE_RGB_MATRIX_ALPHAS_MODS
+#    define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define DISABLE_RGB_MATRIX_BREATHING
+#    define DISABLE_RGB_MATRIX_BAND_SAT
+#    define DISABLE_RGB_MATRIX_BAND_VAL
+#    define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+
+// #define DISABLE_RGB_MATRIX_CYCLE_ALL
+// #    define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define DISABLE_RGB_MATRIX_DUAL_BEACON
+#    define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+// #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define DISABLE_RGB_MATRIX_RAINDROPS
+#    define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+
+#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
+
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+// #    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+
+#    define DISABLE_RGB_MATRIX_SPLASH
+#    define DISABLE_RGB_MATRIX_MULTISPLASH
+#    define DISABLE_RGB_MATRIX_SOLID_SPLASH
+#    define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+#    define RGB_MATRIX_ANIMATION_SPEED_DEFAULT UINT8_MAX / 2
+#    define RGB_MATRIX_ANIMATION_SPEED_SLOW RGB_MATRIX_ANIMATION_SPEED_DEFAULT / 4
+#    define RGB_MATRIX_ANIMATION_SPEED_SLOWER RGB_MATRIX_ANIMATION_SPEED_SLOW / 3
+#endif
+
+#define TAPPING_TERM 140
+#define PERMISSIVE_HOLD
 #define IGNORE_MOD_TAP_INTERRUPT
-// #define RETRO_TAPPING
 
 #define TAPPING_TOGGLE 2
 
-#define MOUSEKEY_DELAY             0
-#define MOUSEKEY_INTERVAL          16
-#define MOUSEKEY_MAX_SPEED         6
-#define MOUSEKEY_TIME_TO_MAX       32
-#define MOUSEKEY_WHEEL_MAX_SPEED   4
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 40
+#ifdef MOUSEKEY_ENABLE
+#    define MOUSEKEY_DELAY 0
+#    define MOUSEKEY_INTERVAL 16
+#    define MOUSEKEY_MAX_SPEED 6
+#    define MOUSEKEY_TIME_TO_MAX 36
+#    define MOUSEKEY_WHEEL_MAX_SPEED 4
+#    define MOUSEKEY_WHEEL_TIME_TO_MAX 100
+#endif
 
-#define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont.c"
+#ifdef THEME_GODSPEED
+#   define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont_godspeed.c"
+#   define THEME_HSV 132, 255, 125
+#endif
+
+#ifdef THEME_PULSE
+#   define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont_pulse.c"
+#   define THEME_HSV 123, 255, 125
+#endif
+
+#ifdef THEME_LASER
+#   define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont_laser.c"
+#   define THEME_HSV HSV_MAGENTA
+#endif
 
 #define NO_ACTION_ONESHOT
 
 #undef PRODUCT
 #define PRODUCT Corne Keyboard
+
+#define LCPC_KEYS KC_LCTL, KC_LSFT, KC_9
+#define RCPC_KEYS KC_RCTL, KC_RSFT, KC_0

keyboards/crkbd/keymaps/rpbaptist/glcdfont_godspeed.c

@@ -0,0 +1,231 @@
+#include "progmem.h"
+
+// Helidox 8x6 font with QMK Firmware Logo
+// Online editor: http://teripom.x0.com/
+
+const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xE0,
+0x38, 0x1C, 0x0C, 0x06, 0x03, 0x03,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x03, 0x03, 0x82, 0x86, 0xCC, 0xF8,
+0xF0, 0xF0, 0x38, 0x1C, 0x0C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xC0, 0x70,
+0xF8, 0x0C, 0x04, 0xC6, 0xA2, 0xB3,
+0x9F, 0x87, 0x01, 0x01, 0x1F, 0x66,
+0x66, 0x44, 0x4C, 0x58, 0x70, 0xE0,
+0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xC0,
+0xE0, 0x78, 0x18, 0x8C, 0xC6, 0xE6,
+0xE3, 0xE3, 0xC3, 0x83, 0x03, 0x03,
+0x73, 0x76, 0x76, 0x0C, 0x18, 0xF8,
+0xF0, 0xC0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x80, 0xC0, 0x40, 0x7F, 0xF3,
+0x60, 0x20, 0x30, 0x30, 0x38, 0x18,
+0x9C, 0xCC, 0x6C, 0x6E, 0x3E, 0x3E,
+0x1F, 0x0F, 0x0F, 0x03, 0x03, 0x01,
+0xC0, 0xFF, 0x3E, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x7F, 0xC1, 0x00,
+0x1D, 0x67, 0xC0, 0x80, 0x01, 0x00,
+0x00, 0xF0, 0x0F, 0x00, 0x00, 0x00,
+0x0C, 0x1A, 0x32, 0xC2, 0x01, 0xC1,
+0xFF, 0x3E, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x7E, 0xFF,
+0x80, 0x00, 0x00, 0xC3, 0xC7, 0xC7,
+0x8F, 0x0F, 0x07, 0x03, 0x80, 0xC0,
+0xC0, 0xC0, 0xC0, 0x80, 0x00, 0x07,
+0x0F, 0xFF, 0x7F, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x01, 0x01, 0x00, 0x40, 0x60, 0x31,
+0x3B, 0x1E, 0x0C, 0x1E, 0x36, 0x23,
+0x61, 0x60, 0x60, 0x60, 0x60, 0x60,
+0x60, 0x30, 0x1C, 0x3E, 0x3E, 0x3F,
+0x1D, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x07,
+0x0C, 0x18, 0x10, 0x33, 0x3E, 0x38,
+0x6E, 0x67, 0x60, 0x60, 0x60, 0x20,
+0x30, 0x18, 0x08, 0x0F, 0x06, 0x03,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x03, 0x06, 0x0C, 0x19, 0x31, 0x21,
+0x60, 0x60, 0x60, 0x60, 0x61, 0x63,
+0x67, 0x67, 0x33, 0x39, 0x18, 0x0E,
+0x07, 0x03, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};

keyboards/crkbd/keymaps/rpbaptist/glcdfont_laser.c

@@ -0,0 +1,231 @@
+#include "progmem.h"
+
+// Helidox 8x6 font with QMK Firmware Logo
+// Online editor: http://teripom.x0.com/
+
+const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+0xE0, 0xF8, 0x3E, 0x0F, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x80, 0xC0,
+0xE0, 0xF0, 0xF8, 0xFC, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xE0, 0xF0, 0x7C,
+0x3F, 0x0F, 0x03, 0x03, 0x03, 0x03,
+0x03, 0x03, 0x1B, 0x1F, 0x1F, 0x07,
+0x03, 0xC0, 0xE0, 0xFC, 0x1C, 0x0F,
+0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+0xE7, 0xFF, 0xFF, 0x0F, 0x03, 0x03,
+0x03, 0x03, 0x83, 0x83, 0xE3, 0xE7,
+0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x80, 0xC0, 0xF0, 0x7C, 0x1F, 0x07,
+0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+0x80, 0x90, 0x98, 0x9C, 0x8C, 0x80,
+0x80, 0x80, 0x9C, 0x9C, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
+0x10, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+0x1C, 0x1C, 0x9C, 0x9C, 0x1C, 0x1C,
+0x0C, 0x0C, 0x80, 0x90, 0x90, 0x10,
+0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x0C,
+0x00, 0x00, 0x90, 0x90, 0x9C, 0x9C,
+0x1C, 0x1C, 0x1C, 0x1C, 0x9C, 0x9C,
+0x9C, 0x0C, 0x0C, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x70, 0x7C, 0x7E,
+0x6F, 0x63, 0x60, 0x60, 0x60, 0x60,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x60,
+0x60, 0x70, 0x78, 0x3C, 0x1E, 0x0F,
+0x07, 0x03, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x7F, 0x7F, 0x00, 0x00,
+0x60, 0x70, 0x7C, 0x7C, 0x6C, 0x60,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x78,
+0x3E, 0x0F, 0x03, 0x01, 0x00, 0x60,
+0x78, 0x7E, 0x67, 0x61, 0x60, 0x60,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x60,
+0x70, 0x00, 0x00, 0x00, 0x00, 0x60,
+0x78, 0x7E, 0x0F, 0x07, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x03, 0x0F,
+0x7F, 0x70, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};

keyboards/crkbd/keymaps/rpbaptist/glcdfont_pulse.c

@@ -0,0 +1,231 @@
+#include "progmem.h"
+
+// Helidox 8x6 font with QMK Firmware Logo
+// Online editor: http://teripom.x0.com/
+
+const unsigned char font[] PROGMEM = {
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+  0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+  0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+  0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+  0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+  0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+  0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+  0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+  0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+  0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+  0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+  0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+  0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+  0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+  0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+  0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+  0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+  0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+  0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+  0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+  0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+  0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+  0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+  0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+  0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+  0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+  0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+  0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+  0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+  0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+  0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+  0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+  0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+  0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+  0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+  0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+  0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+  0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+  0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+  0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+  0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+  0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+  0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+  0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+  0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+  0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+  0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+  0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+  0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+  0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+  0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+  0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+  0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+  0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+  0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+  0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+  0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+  0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+  0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+  0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+  0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+  0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+  0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+  0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+  0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+  0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+  0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+  0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+  0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+  0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+  0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+  0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+  0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+  0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+  0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+  0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+  0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+  0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+  0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+  0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+  0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+  0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+  0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+  0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+  0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+  0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+  0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+  0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+  0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+  0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+  0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+  0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+  0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+  0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+  0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+  0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+  0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+  0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+  0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+  0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+  0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+  0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x80, 0xF0, 0xF8, 0xF8, 0xF0,
+  0x80, 0x00, 0x00, 0x00, 0x00, 0x80,
+  0xF0, 0xFE, 0x7F, 0x7F, 0xFE, 0xF0,
+  0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+  0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+  0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+  0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+  0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+  0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+  0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+  0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1F, 0x0F, 0x03, 0x03, 0x1F,
+  0xFF, 0xFC, 0xE0, 0xE0, 0xFC, 0xFF,
+  0x1F, 0x03, 0x00, 0x00, 0x03, 0x1F,
+  0xFF, 0xFC, 0xE0, 0xE0, 0xF8, 0xFC,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+  0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+  0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+  0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+  0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+  0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+  0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+  0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x0F, 0x0F, 0x07, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x0F, 0x0F, 0x07, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};

keyboards/crkbd/keymaps/rpbaptist/keymap.c

@@ -1,46 +1,84 @@
 #include QMK_KEYBOARD_H
 
-extern uint8_t is_master;
+extern uint8_t  is_master;
+static uint32_t oled_timer = 0;
+
+#ifdef RGB_MATRIX_ENABLE
+    static uint32_t hypno_timer;
+#endif
 
 enum layer_names {
   _COLEMAKDHM,
   _GAMING,
   _GAMING_EXT,
-  _NUM,
-  _FN,
+  _NUMPAD,
+  _SYM,
   _NAV,
   _UTIL
 };
 
+enum custom_keycodes {
+    BSP_DEL = SAFE_RANGE,
+    RGB_RST,  // Reset RGB
+    RGB_UND,  // Toggle RGB underglow as layer indicator
+    RGB_IDL,  // RGB Idling animations
+    RGB_MAP,  // RGB_MATRIX_TYPING_HEATMAP
+    RGB_NXS,  // RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+    RGB_SOL,  // RGB_MATRIX_SOLID_COLOR
+    RGB_CYC,  // RGB_MATRIX_CYCLE_ALL
+    RGB_DUO,  // RGB_MATRIX_RAINBOW_PINWHEELS
+    RGB_SCR   // RGB_MATRIX_CYCLE_LEFT_RIGHT
+};
+
+typedef union {
+    uint32_t raw;
+    struct {
+        bool     rgb_layer_change        : 1;
+        bool     rgb_matrix_idle_anim    : 1;
+        uint8_t  rgb_matrix_active_mode  : 4;
+        uint8_t  rgb_matrix_idle_mode    : 4;
+        uint8_t  rgb_matrix_active_speed : 8;
+        uint8_t  rgb_matrix_idle_speed   : 8;
+        uint16_t rgb_matrix_idle_timeout : 16;
+    };
+} user_config_t;
+
+user_config_t user_config;
+
 // Base layers
 #define COLEMAK DF(_COLEMAKDHM)
-#define GAMING DF(_GAMING)
+#define GAMING  DF(_GAMING)
 
 // Layer toggle and switch
 #define T_NAV TT(_NAV)
 #define S_NAV MO(_NAV)
 
-#define T_NUM TT(_NUM)
-#define S_NUM MO(_NUM)
+#define T_SYM TT(_SYM)
+#define S_SYM MO(_SYM)
 
 // Layer keys with functionality on tap
-#define FN_TAB LT(_FN, KC_TAB)
 #define NAV_0 LT(_NAV, KC_0)
+#define TAB_NUM LT(_NUMPAD, KC_TAB)
+
 #define EXT_SF LT(_GAMING_EXT, KC_LSHIFT)
 
 // Tap/mod keys
-#define RCTBR RCTL_T(KC_RBRACKET)
-#define LCTBR LCTL_T(KC_LBRACKET)
+#define RCTL_BR RCTL_T(KC_RBRACKET)
+#define LCTL_BR LCTL_T(KC_LBRACKET)
 
-#define SFSPC LSFT_T(KC_SPACE)
-#define SFENT LSFT_T(KC_ENTER)
+#define SFT_SPC LSFT_T(KC_SPACE)
+#define SFT_ENT RSFT_T(KC_ENTER)
 
 // Global tab forward and backward
-#define TBFWD LCTL(KC_TAB)
-#define TBBCK LCTL(LSFT(KC_TAB))
+#define TAB_FWD LCTL(KC_TAB)
+#define TAB_BCK LCTL(LSFT(KC_TAB))
+#define TAB_CLS LCTL(KC_W)
 
-// Custom key for NUM layer
-#define CTEQL RCTL_T(KC_EQL)
+#define WIN_CLS LALT(KC_F4)
+
+// CTRL become parens keys on NAV and NUM layers
+#define LCT_PRN KC_LCPO
+#define RCT_PRN KC_RCPC
 
 // €
 #define KC_EUR ALGR(KC_5)
@@ -48,19 +86,19 @@ enum layer_names {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_COLEMAKDHM] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-       KC_ESC,    KC_Q,    KC_W,    KC_F,    KC_P,    KC_B,                         KC_J,    KC_L,    KC_U,    KC_Y, KC_SCLN, KC_BSPC,\
+       KC_ESC,    KC_Q,    KC_W,    KC_F,    KC_P,    KC_B,                         KC_J,    KC_L,    KC_U,    KC_Y, KC_SCLN, BSP_DEL,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-       FN_TAB,    KC_A,    KC_R,    KC_S,    KC_T,    KC_G,                         KC_M,    KC_N,    KC_E,    KC_I,    KC_O, KC_QUOT,\
+      TAB_NUM,    KC_A,    KC_R,    KC_S,    KC_T,    KC_G,                         KC_M,    KC_N,    KC_E,    KC_I,    KC_O, KC_QUOT,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-        LCTBR,    KC_Z,    KC_X,    KC_C,    KC_D,    KC_V,                         KC_K,    KC_H, KC_COMM, KC_DOT, KC_SLSH,    RCTBR,\
+      LCTL_BR,    KC_Z,    KC_X,    KC_C,    KC_D,    KC_V,                         KC_K,    KC_H, KC_COMM,  KC_DOT, KC_SLSH, RCTL_BR,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          KC_LALT,   T_NUM,   SFSPC,      SFENT,   T_NAV, KC_RGUI \
+                                          KC_LALT,   T_SYM, SFT_SPC,    SFT_ENT,   T_NAV, KC_RGUI \
                                       //`--------------------------'  `--------------------------'
   ),
 
   [_GAMING] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-      _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______,\
+      _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, KC_BSPC,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
        KC_TAB, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
@@ -72,59 +110,59 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_GAMING_EXT] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-       KC_GRV,    KC_1,    KC_2, _______,    KC_3,    KC_4,                        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  KC_DEL,\
+       KC_GRV,    KC_1,    KC_2, _______,    KC_3,    KC_4,                      _______, _______, _______, _______, _______,  KC_DEL,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      KC_LBRC, KC_RBRC, _______, _______, _______, KC_BSLS,                        KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, _______,\
+      KC_LBRC, KC_RBRC, _______, _______, _______, KC_BSLS,                      _______, _______, _______, _______, _______, _______,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-         KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,                       KC_F11,  KC_F12, KC_MINS,  KC_EQL, _______, _______,\
+         KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,                      _______, _______, _______, _______, _______, _______,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
                                           _______, _______, _______,     KC_ENT, _______, _______ \
                                       //`--------------------------'  `--------------------------'
   ),
 
-  [_FN] = LAYOUT( \
+  [_NUMPAD] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-       KC_F12,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                        KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,\
+      _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                       KC_EUR,   KC_P7,   KC_P8,   KC_P9, XXXXXXX, _______,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      _______, XXXXXXX, XXXXXXX, XXXXXXX, KC_CAPS, KC_NLCK,                      XXXXXXX, KC_MINS, KC_PIPE, KC_BSLS, KC_PLUS, XXXXXXX,\
+      _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_UNDS,   KC_P4,   KC_P5,   KC_P6, KC_PMNS, KC_PPLS,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      _______, XXXXXXX, KC_PAUS, KC_SLCK, KC_PSCR,  KC_INS,                      XXXXXXX, KC_UNDS,   KC_LT,   KC_GT,  KC_EQL, _______,\
+      KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_NLCK,                       KC_EQL,   KC_P1,   KC_P2,   KC_P3, KC_PSLS, KC_PAST,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          _______, _______, _______,    _______, _______, _______ \
+                                          _______, _______, _______,    _______,   KC_P0,  KC_DOT \
                                       //`--------------------------'  `--------------------------'
   ),
 
-  [_NUM] = LAYOUT( \
+  [_SYM] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
        KC_GRV,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                         KC_6,    KC_7,    KC_8,    KC_9,    KC_0, _______,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      KC_TILD,  KC_EXLM,  KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_SLSH,    KC_4,    KC_5,    KC_6, KC_MINS, KC_PLUS,\
+      KC_TILD, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_CIRC, KC_AMPR, KC_ASTR, KC_UNDS, KC_MINS, KC_PLUS,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      _______, KC_CIRC, KC_AMPR,  KC_EUR, KC_LPRN, KC_RPRN,                      KC_ASTR,    KC_1,    KC_2,    KC_3, KC_UNDS,   CTEQL,\
+      LCT_PRN, XXXXXXX, XXXXXXX, XXXXXXX,  KC_EUR, XXXXXXX,                       KC_EQL, KC_PIPE,   KC_LT,   KC_GT, KC_BSLS, RCT_PRN,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          _______,   S_NUM, _______,    _______, NAV_0, KC_DOT \
+                                          _______,   S_SYM, _______,    _______, _______, _______ \
                                       //`--------------------------'  `--------------------------'
   ),
 
   [_NAV] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-      _______, KC_WH_U,   TBBCK, KC_MS_U,   TBFWD, KC_BTN2,                      KC_PGUP, KC_HOME,   KC_UP,  KC_END, XXXXXXX,  KC_DEL,\
+       KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                      KC_PGUP, KC_HOME,   KC_UP,  KC_END, XXXXXXX, KC_BSPC,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-       KC_TAB, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN1,                      KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX,\
+      KC_TILD,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,                      KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      _______, XXXXXXX, KC_WH_L, XXXXXXX, KC_WH_R, XXXXXXX,                      XXXXXXX, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, _______,\
-  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+-------+---------|
-                                          _______, _______, _______,    _______, S_NAV, _______ \
+      LCT_PRN,  KC_F11,  KC_F12,  KC_INS, KC_PSCR, KC_CAPS,                      WIN_CLS, TAB_BCK, TAB_CLS, TAB_FWD, XXXXXXX, RCT_PRN,\
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+---------|
+                                          _______, _______, _______,    _______,   S_NAV, _______ \
                                       //`--------------------------'  `--------------------------'
   ),
 
   [_UTIL] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-        RESET, XXXXXXX, KC_MSTP, KC_VOLU, KC_MNXT, XXXXXXX,                      COLEMAK,  GAMING, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
+        RESET, XXXXXXX, KC_MPRV, KC_VOLU, KC_MNXT, COLEMAK,                      RGB_IDL, RGB_MAP, RGB_NXS, XXXXXXX, RGB_HUD, RGB_HUI,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      XXXXXXX, XXXXXXX, KC_MPRV, KC_VOLD, KC_MPLY, XXXXXXX,                      XXXXXXX, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI,\
+      RGB_RST, XXXXXXX, KC_MSTP, KC_VOLD, KC_MPLY,  GAMING,                      RGB_UND, RGB_DUO, RGB_SCR, RGB_SPI, RGB_SAD, RGB_SAI,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      XXXXXXX, KC_SLEP, XXXXXXX, KC_MUTE, XXXXXXX, XXXXXXX,                      RGB_TOG,RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD,\
+      EEP_RST, KC_SLEP, XXXXXXX, KC_MUTE, XXXXXXX, XXXXXXX,                      RGB_TOG, RGB_SOL, RGB_CYC, RGB_SPD, RGB_VAD, RGB_VAI,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
                                           _______, _______, _______,    _______, _______, _______ \
                                       //`--------------------------'  `--------------------------'
@@ -132,103 +170,404 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 layer_state_t layer_state_set_user(layer_state_t state) {
-  switch (get_highest_layer(default_layer_state)) {
-    case _COLEMAKDHM:
-      state = update_tri_layer_state(state, _NUM, _NAV, _UTIL);
-      break;
-    case _GAMING:
-      state = update_tri_layer_state(state, _GAMING_EXT, _NAV, _UTIL);
-      break;
-  }
-  return state;
+    switch (get_highest_layer(default_layer_state)) {
+        case _COLEMAKDHM:
+            state = update_tri_layer_state(state, _SYM, _NAV, _UTIL);
+            break;
+        case _GAMING:
+            state = update_tri_layer_state(state, _GAMING_EXT, _NAV, _UTIL);
+            break;
+    }
+    return state;
 }
 
 #ifdef OLED_DRIVER_ENABLE
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-  if (is_master) {
-    return OLED_ROTATION_270;
-  } else {
-    return OLED_ROTATION_180;
-  }
+    if (is_master) {
+        return OLED_ROTATION_270;
+    } else {
+        return OLED_ROTATION_180;
+    }
 }
 
 void render_crkbd_logo(void) {
-  static const char PROGMEM crkbd_logo[] = {
-      0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
-      0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
-      0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
-      0};
-  oled_write_P(crkbd_logo, false);
+    static const char PROGMEM crkbd_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(crkbd_logo, false);
 }
 
+#    ifdef RGB_MATRIX_ENABLE
+const char *rgb_matrix_anim_oled_text(uint8_t mode) {
+    switch (mode) {
+        case RGB_MATRIX_TYPING_HEATMAP:
+            return PSTR("Heat ");
+        case RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS:
+            return PSTR("Nexus");
+        case RGB_MATRIX_SOLID_COLOR:
+            return PSTR("Solid");
+        case RGB_MATRIX_CYCLE_ALL:
+            return PSTR("Cycle");
+        case RGB_MATRIX_RAINBOW_PINWHEELS:
+            return PSTR("Wheel");
+        case RGB_MATRIX_CYCLE_LEFT_RIGHT:
+            return PSTR("Wave ");
+        default:
+            return PSTR("");
+    }
+}
+#    endif
+
 void render_status(void) {
-  // oled_write_P(PSTR("Layout: "), false);
-  switch (get_highest_layer(default_layer_state)) {
-    case _COLEMAKDHM:
-      oled_write_P(PSTR("CLMK "), false);
-      break;
-    case _GAMING:
-      oled_write_P(PSTR("GAME "), false);
-      break;
-  }
+    // oled_write_P(PSTR("Layout: "), false);
+    switch (get_highest_layer(default_layer_state)) {
+        case _COLEMAKDHM:
+            oled_write_P(PSTR("TYPE "), false);
+            break;
+        case _GAMING:
+            oled_write_P(PSTR("GAME "), false);
+            break;
+    }
 
-  oled_write_P(PSTR("\n"), false);
+    oled_write_P(PSTR("\n"), false);
 
-  switch (get_highest_layer(layer_state)) {
-    case 0:
-      oled_write_P(PSTR("     "), false);
-      break;
-    case _NUM:
-      oled_write_P(PSTR("Comm "), false);
-      break;
-    case _FN:
-      oled_write_P(PSTR("Stage"), false);
-      break;
-    case _NAV:
-      oled_write_P(PSTR("Fuel "), false);
-      break;
-    case _GAMING_EXT:
-      oled_write_P(PSTR("Ext  "), false);
-      break;
-    case _UTIL:
-      oled_write_P(PSTR("Util "), false);
-      break;
-    default:
-      oled_write_P(PSTR("Unkn "), false);
-      break;
-  }
-  oled_write_P(PSTR("\n"), false);
+    switch (get_highest_layer(layer_state)) {
+        case 0:
+            oled_write_P(PSTR("     "), false);
+            break;
+        case _SYM:
+            oled_write_P(PSTR("Sym  "), false);
+            break;
+        case _NAV:
+            oled_write_P(PSTR("Nav  "), false);
+            break;
+        case _GAMING_EXT:
+            oled_write_P(PSTR("Ext  "), false);
+            break;
+        case _NUMPAD:
+            oled_write_P(PSTR("Num  "), false);
+            break;
+        case _UTIL:
+            oled_write_P(PSTR("Util "), false);
+            break;
+        default:
+            oled_write_P(PSTR("Unkn "), false);
+            break;
+    }
+    oled_write_P(PSTR("\n"), false);
 
-  uint8_t modifiers = get_mods();
+    uint8_t modifiers = get_mods();
 
-  oled_write_P( (modifiers & MOD_MASK_CTRL)  ? PSTR("PROG ") : PSTR("     "), false);
-  oled_write_P( (modifiers & MOD_MASK_SHIFT) ? PSTR("PULSE") : PSTR("     "), false);
-  oled_write_P( (modifiers & MOD_MASK_ALT)   ? PSTR("STBY ") : PSTR("     "), false);
-  oled_write_P( (modifiers & MOD_MASK_GUI)   ? PSTR("GYRO ") : PSTR("     "), false);
+    oled_write_P((modifiers & MOD_MASK_SHIFT) ? PSTR("SHIFT") : PSTR("\n"), false);
+    oled_write_P((modifiers & MOD_MASK_CTRL) ? PSTR("CTRL ") : PSTR("\n"), false);
+    oled_write_P((modifiers & MOD_MASK_ALT) ? PSTR("ALT  ") : PSTR("\n"), false);
+    oled_write_P((modifiers & MOD_MASK_GUI) ? PSTR("SUPER") : PSTR("\n"), false);
 
-  oled_write_P(PSTR("\n"), false);
+    oled_write_P(PSTR("\n"), false);
 
-  uint8_t led_usb_state = host_keyboard_leds();
-  oled_write_P(PSTR("Mode:\n"), false);
-  oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK)    ? PSTR(" NUM ") : PSTR("     "), false);
-  oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK)   ? PSTR(" CAPS") : PSTR("     "), false);
-  oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR(" SCRL") : PSTR("     "), false);
+    uint8_t led_usb_state = host_keyboard_leds();
+    oled_write_P(PSTR("Mode:"), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR(" NUM ") : PSTR("\n"), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR(" CAPS") : PSTR("\n"), false);
+
+#    ifdef RGB_MATRIX_ENABLE
+    oled_write_P(PSTR("\n"), false);
+    oled_write_P(PSTR("\n"), false);
+
+    if (rgb_matrix_config.enable) {
+        if (user_config.rgb_matrix_idle_anim) {
+            oled_write_P(rgb_matrix_anim_oled_text(user_config.rgb_matrix_active_mode), false);
+            oled_write_P(rgb_matrix_anim_oled_text(user_config.rgb_matrix_idle_mode), false);
+        } else {
+            oled_write_P(PSTR("\n"), false);
+            oled_write_P(rgb_matrix_anim_oled_text(rgb_matrix_get_mode()), false);
+        }
+      } else {
+        oled_write_P(PSTR("\n"), false);
+        oled_write_P(PSTR("\n"), false);
+      }
+#    endif
 }
 
 void oled_task_user(void) {
-  if (is_master) {
-    render_status();     // Renders the current keyboard state (layer, lock, caps, scroll, etc)
-  } else {
-    render_crkbd_logo();
-    // oled_scroll_left();  // Turns on scrolling
-  }
+    if (timer_elapsed32(oled_timer) > OLED_TIMEOUT) {
+        oled_off();
+        return;
+    } else {
+        oled_on();
+    }
+
+    if (is_master) {
+        render_status();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_crkbd_logo();
+        #ifdef RGB_MATRIX_ENABLE
+            if (user_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == user_config.rgb_matrix_idle_mode) {
+                oled_scroll_left();  // Turns on scrolling
+            } else {
+              oled_scroll_off();
+            }
+        #endif
+    }
+}
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+
+extern led_config_t g_led_config;
+void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t led_type) {
+    HSV hsv = {hue, sat, val};
+    if (hsv.v > rgb_matrix_config.hsv.v) {
+        hsv.v = rgb_matrix_config.hsv.v;
+    }
+
+    RGB rgb = hsv_to_rgb(hsv);
+    for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
+        if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
+            rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
+        }
+    }
+}
+
+void check_default_layer(uint8_t type) {
+    switch (get_highest_layer(default_layer_state)) {
+        case _COLEMAKDHM:
+            rgb_matrix_layer_helper(THEME_HSV, type);
+            break;
+        case _GAMING:
+            rgb_matrix_layer_helper(HSV_RED, type);
+            break;
+    }
+}
+
+void rgb_matrix_indicators_user(void) {
+  if (
+    user_config.rgb_layer_change && !g_suspend_state && rgb_matrix_config.enable &&
+      (!user_config.rgb_matrix_idle_anim || rgb_matrix_get_mode() != user_config.rgb_matrix_idle_mode)
+  )
+    {
+        switch (get_highest_layer(layer_state)) {
+            case _GAMING_EXT:
+                rgb_matrix_layer_helper(HSV_PURPLE, LED_FLAG_UNDERGLOW);
+                break;
+            case _SYM:
+                rgb_matrix_layer_helper(HSV_GOLDENROD, LED_FLAG_UNDERGLOW);
+                break;
+            case _NAV:
+                rgb_matrix_layer_helper(HSV_SPRINGGREEN, LED_FLAG_UNDERGLOW);
+                break;
+            case _UTIL:
+                rgb_matrix_layer_helper(HSV_PINK, LED_FLAG_UNDERGLOW);
+                break;
+            case _NUMPAD:
+                rgb_matrix_layer_helper(HSV_CORAL, LED_FLAG_UNDERGLOW);
+                break;
+            default: {
+                check_default_layer(LED_FLAG_UNDERGLOW);
+                break;
+            }
+        }
+    }
+}
+
+void rgb_matrix_update_current_mode(uint8_t mode, uint8_t speed) {
+    rgb_matrix_config.speed = speed;
+    rgb_matrix_mode_noeeprom(mode);
+    eeconfig_update_user(user_config.raw);
+}
+
+void rgb_matrix_update_dynamic_mode(uint8_t mode, uint8_t speed, bool active) {
+    if (active) {
+        user_config.rgb_matrix_active_speed = speed;
+        user_config.rgb_matrix_active_mode  = mode;
+    } else {
+        user_config.rgb_matrix_idle_speed = speed;
+        user_config.rgb_matrix_idle_mode  = mode;
+    }
+}
+
+void rgb_matrix_update_mode(uint8_t mode, uint8_t speed, bool active) {
+    if (user_config.rgb_matrix_idle_anim) {
+        rgb_matrix_update_dynamic_mode(mode, speed, active);
+    }
+    if (active || !user_config.rgb_matrix_idle_anim) {
+        rgb_matrix_update_current_mode(mode, speed);
+    }
+}
+
+void rgb_matrix_set_defaults(void) {
+    rgb_matrix_config.enable = 1;
+    rgb_matrix_sethsv_noeeprom(THEME_HSV);
+
+    user_config.rgb_layer_change        = false;
+    user_config.rgb_matrix_idle_anim    = true;
+    user_config.rgb_matrix_idle_timeout = 60000;
+
+    rgb_matrix_update_dynamic_mode(RGB_MATRIX_CYCLE_ALL, RGB_MATRIX_ANIMATION_SPEED_SLOWER, false);
+    rgb_matrix_update_dynamic_mode(RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS, RGB_MATRIX_ANIMATION_SPEED_DEFAULT, true);
+
+    eeprom_update_block(&rgb_matrix_config, EECONFIG_RGB_MATRIX, sizeof(rgb_matrix_config));
+}
+
+void matrix_scan_rgb(void) {
+    if (user_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == user_config.rgb_matrix_active_mode && timer_elapsed32(hypno_timer) > user_config.rgb_matrix_idle_timeout) {
+        if (user_config.rgb_layer_change) {
+            rgb_matrix_layer_helper(0, 0, 0, LED_FLAG_UNDERGLOW);
+        }
+        rgb_matrix_update_current_mode(user_config.rgb_matrix_idle_mode, user_config.rgb_matrix_idle_speed);
+    }
+}
+
+void matrix_scan_user(void) {
+    static bool has_ran_yet;
+    if (!has_ran_yet) {
+        has_ran_yet = true;
+        startup_user();
+    }
+    matrix_scan_rgb();
+}
+
+void eeconfig_init_user(void) {
+    user_config.raw = 0;
+    rgb_matrix_mode_noeeprom(user_config.rgb_matrix_active_mode);
+    keyboard_init();
+}
+
+void keyboard_post_init_user(void) {
+    user_config.raw = eeconfig_read_user();
+    rgb_matrix_set_defaults();
+    rgb_matrix_enable_noeeprom();
 }
 #endif
 
 void suspend_power_down_keymap(void) {
+    oled_off();
     rgb_matrix_set_suspend_state(true);
 }
 
 void suspend_wakeup_init_keymap(void) {
+    oled_on();
     rgb_matrix_set_suspend_state(false);
 }
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    static uint8_t saved_mods   = 0;
+    uint16_t       temp_keycode = keycode;
+
+    oled_timer = timer_read32();
+
+#ifdef RGB_MATRIX_ENABLE
+    if (user_config.rgb_matrix_idle_anim) {
+        hypno_timer = timer_read32();
+        if (rgb_matrix_get_mode() == user_config.rgb_matrix_idle_mode) {
+            rgb_matrix_update_current_mode(user_config.rgb_matrix_active_mode, user_config.rgb_matrix_active_speed);
+            if (!user_config.rgb_layer_change) {
+                rgb_matrix_layer_helper(0, 0, 0, LED_FLAG_UNDERGLOW);
+            }
+        }
+    }
+#endif
+
+    // Filter out the actual keycode from MT and LT keys.
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+        temp_keycode &= 0xFF;
+    }
+
+    switch (temp_keycode) {
+        case BSP_DEL:
+            if (record->event.pressed) {
+                saved_mods = get_mods() & MOD_MASK_SHIFT;
+
+                if (saved_mods == MOD_MASK_SHIFT) {  // Both shifts pressed
+                    register_code(KC_DEL);
+                } else if (saved_mods) {   // One shift pressed
+                    del_mods(saved_mods);  // Remove any Shifts present
+                    register_code(KC_DEL);
+                    add_mods(saved_mods);  // Add shifts again
+                } else {
+                    register_code(KC_BSPC);
+                }
+            } else {
+                unregister_code(KC_DEL);
+                unregister_code(KC_BSPC);
+            }
+            return false;
+#ifdef RGB_MATRIX_ENABLE
+        case COLEMAK:
+            if (record->event.pressed) {
+                user_config.rgb_matrix_idle_timeout = 60000;
+                rgb_matrix_update_mode(RGB_MATRIX_CYCLE_ALL, RGB_MATRIX_ANIMATION_SPEED_SLOWER, false);
+            }
+            return true;
+        case GAMING:
+            if (record->event.pressed) {
+                if (!user_config.rgb_layer_change) {
+                    user_config.rgb_layer_change = true;
+                }
+                user_config.rgb_matrix_idle_timeout = 10000;
+                rgb_matrix_update_mode(RGB_MATRIX_RAINBOW_PINWHEELS, RGB_MATRIX_ANIMATION_SPEED_SLOW, false);
+            }
+            return true;
+        case RGB_RST:
+            if (record->event.pressed) {
+                rgb_matrix_set_defaults();
+                rgb_matrix_enable();
+            }
+            break;
+        case RGB_UND:  // Toggle separate underglow status
+            if (record->event.pressed) {
+                user_config.rgb_layer_change ^= 1;
+                eeconfig_update_user(user_config.raw);
+                if (user_config.rgb_layer_change) {
+                    layer_state_set(layer_state);  // This is needed to immediately set the layer color (looks better)
+                } else {
+                    rgb_matrix_layer_helper(0, 0, 0, LED_FLAG_UNDERGLOW);
+                }
+            }
+            break;
+        case RGB_IDL:  // Toggle idle/heatmap animation
+            if (record->event.pressed) {
+                user_config.rgb_matrix_idle_anim ^= 1;
+                if (user_config.rgb_matrix_idle_anim) {
+                    rgb_matrix_update_mode(user_config.rgb_matrix_active_mode, user_config.rgb_matrix_active_speed, true);
+                } else {
+                    rgb_matrix_update_current_mode(user_config.rgb_matrix_idle_mode, user_config.rgb_matrix_idle_speed);
+                }
+            }
+            break;
+        case RGB_MAP:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_TYPING_HEATMAP, rgb_matrix_config.speed, true);
+            }
+            break;
+        case RGB_NXS:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS, RGB_MATRIX_ANIMATION_SPEED_DEFAULT, true);
+            }
+            break;
+        case RGB_SOL:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_SOLID_COLOR, rgb_matrix_config.speed, false);
+            }
+            break;
+        case RGB_CYC:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_CYCLE_ALL, RGB_MATRIX_ANIMATION_SPEED_SLOWER, false);
+            }
+            break;
+        case RGB_DUO:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_RAINBOW_PINWHEELS, RGB_MATRIX_ANIMATION_SPEED_SLOW, false);
+            }
+            break;
+        case RGB_SCR:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_CYCLE_LEFT_RIGHT, RGB_MATRIX_ANIMATION_SPEED_SLOW, false);
+            }
+            break;
+#endif
+    }
+    return true;
+}

keyboards/crkbd/keymaps/rpbaptist/readme.md

@@ -10,27 +10,29 @@ Many thanks to foostan for the keyboard, all QMK contributors and drashna specif
 
 ### COLEMAKDHM
 
-Main typing layer. I really love having SHIFT available on thumbs. I am a left thumb space bar person, so I put SPACE there and ENTER on right. I use CTRL key combos lot in my text editor and desktop environment. That's why I have two of them. I also found them to be a great position for the square brackets. (`[` and `]`)
+Main typing layer. I really love having SHIFT available on thumbs. I am a left thumb space bar person, so I put SPACE there and ENTER on right. I use CTRL key combos lot in my text editor and desktop environment. That's why I have two of them. I also found them to be a great position for the square brackets. (`[` and `]`). These become parenthesis (`(` and `)`) on either of the layers.
 
-I don't know about you but "lower" and "raise" don't mean that much to me. I named my layers `NUM`, short for numbers and `NAV`, short for navigation. Holding the key will activate the layer for as long as it is held, double tapping it will switch to it. Single tapping it once will switch to main layer again.
+Holding SHIFT while tapping BACKSPACE will output DEL. Holding both SHIFT keys will output SHIFT+DEL.
 
-Everything else is pretty standard I'd say.
+I don't know about you but "lower" and "raise" don't mean that much to me. I named my layers `SYM`, short for symbols and `NAV`, short for navigation. Holding the key will activate the layer for as long as it is held, double tapping it will switch to it. Single tapping it once will switch to main layer again.
 
-### NUM
+Holding TAB will access `NUM` layer which features a numpad.
+
+### SYM
 
 Includes a number row, the symbols normally on SHIFT and numbers, as well as a numpad under right side homing keys.
 
 ### NAV
 
-This is where I access arrow keys, page up, down, home, end and mouse control. I also added general tab forward and backward keys. I use these in my browser, terminal and text editor. 
-
-## FN
-
-Short for function. This gives access to the function keys, as well as rarely used keys on the left side and often used symbols (for me) on the right side. It is accessed by holding TAB.
+This is where I access arrow keys, page up, down, home, end and F keys. I also added general tab forward and backward keys. Tab close and window close. I primarily use these in my browser, terminal and text editor.
 
 ### UTIL
 
-Short for utility. This is accessed by pressing both `NUM` and `NAV` at the same time. It has a software `RESET` key, media keys, RGB control and switches main layer between Colemak and a gaming layer.
+Short for utility. This is accessed by pressing both `SYM` and `NAV` at the same time. It has a software `RESET` key, media keys, RGB control and switches main layer between Colemak and a gaming layer.
+
+### NUMPAD
+
+This gives access to a numpad on the right half with some additional symbols I find useful when using the numpad.
 
 ### GAMING
 
@@ -38,20 +40,33 @@ Sometimes I switch to type in Discord, Steam, or in game chat, so I think it's m
 
 I put movement on FRST (would be ESDF on QWERTY), because it lines up more comfortably with the columnar staggered layout of the Corne. It also gives more easy access to all keys on left half.
 
-Most notable here is that there are no tap and hold differences anymore on left hand side besides the new layer key. This is a different layer than `NUM`. 
+Most notable here is that there are no tap and hold differences anymore on left hand side besides the new layer key. This is a different layer than `SYM`.
 
 ### GAMING_EXT
 
-This is the gaming extended layer where movement keys remain the same. This means I can keep moving while accessing second layer keys. All other keys are keys on which I can easily rebind something. Besides that it gives me the function keys and an ENTER key which does not change. This is good when a game requires you to hold ENTER.
+This is the gaming extended layer where movement keys remain the same. This means I can keep moving while accessing second layer keys. All other keys are keys on which I can easily rebind something. Besides that it gives me an ENTER key which does not switch. This is good when a game requires you to hold ENTER.
 
-## Notes
+## RGB
 
-I use MT3 Godspeed caps and thought it would be fun to theme the OLED output towards it. The slave side has the icon and two planets. The left side refers to modifiers by matching the novelty mod legends.
+I took a big inspiration from Drashna's RGB configuration and tweaked it.
+
+- `RGB_UND`: Toggles underglow indicators on and off. Each layer has its own color.
+- `RGB_IDL`: This will enable/disable idle mode. By default, when typing, the `DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS` will be used. When the idle timeout has exceeded the secondary animation will be activated, which is `RGB_MATRIX_CYCLE_ALL` by default. When switching to `GAMING` layer the timeout will be reduced and the idle animation changed to `RGB_MATRIX_RAINBOW_PINWHEELS`.
+   When idle mode is enabled, `RGB_MATRIX_TYPING_HEATMAP` and `RGB_MATRIX_MULTISPLASH` will be used for active animation. All others for idle animation. When disabling idle mode, the current idle animation will be activated. Additionally, on idling, the underglow layer indication will be deactivated.
+- There are no RGB mode cycle keys, but instead several keys to use a specific RGB directly. Each has their own default speed, although this can be changed.
 
 ## Building
 
-I am using DFU and have to flash both halves individually.
+`make crkbd/rev1:rpbaptist:dfu`
 
-Left half: `make crkbd/rev1:rpbaptist:dfu-split-left`
+## Notes
 
-Right half: `make crkbd/rev1:rpbaptist:dfu-split-right RGB_MATRIX_SPLIT_RIGHT=yes`
+I use several OLED slave side images, depending on the keycaps I am using. These also determine the default LED color and underglow.
+
+`make crkbd/rev1:rpbaptist:dfu THEME=pulse`
+
+Current supported themes are:
+
+- godspeed
+- laser
+- pulse

keyboards/crkbd/keymaps/rpbaptist/rules.mk

@@ -1,15 +1,16 @@
-# This enables Link Time Optimization. This can save a good chunk of space (several KB for me), but the macro and function ... functions cause it to error out.
+#This enables Link Time Optimization.This can save a good chunk of space(several KB for me), but the macro and function... functions cause it to error out.
 LINK_TIME_OPTIMIZATION_ENABLE = yes
 
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
+#Build Options
+#change to "no" to disable the options, or define them in the Makefile in
+#the appropriate keymap folder that will get included automatically
 #
-MOUSEKEY_ENABLE    = yes  # Mouse keys(+4700)
 EXTRAKEY_ENABLE    = yes  # Audio control and System control(+450)
 NKRO_ENABLE        = yes  # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# DYNAMIC_MACRO_ENABLE = yes
 
-RGBLIGHT_ENABLE    = no  # Enable WS2812 RGB underlight.
+MOUSEKEY_ENABLE    = no   # Mouse keys(+4700)
+RGBLIGHT_ENABLE    = no   # Enable WS2812 RGB underlight.
 BOOTMAGIC_ENABLE   = no   # Virtual DIP switch configuration(+1000)
 CONSOLE_ENABLE     = no   # Console for debug(+400)
 COMMAND_ENABLE     = no   # Commands for debug and configuration
@@ -22,13 +23,21 @@ SWAP_HANDS_ENABLE  = no   # Enable one-hand typing
 
 RGB_MATRIX_ENABLE = WS2812
 
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+#Do not enable SLEEP_LED_ENABLE.it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE   = no    # Breathing sleep LED during USB suspend
 
 BOOTLOADER       = qmk-dfu
 
 OLED_DRIVER_ENABLE = yes
 
-# ifneq ($(strip $(OLED_DRIVER_ENABLE)), yes)
-#     RGB_MATRIX_SPLIT_RIGHT=yes
-# endif
+ifeq ($(strip $(THEME)), godspeed)
+    OPT_DEFS += -DTHEME_GODSPEED
+endif
+
+ifeq ($(strip $(THEME)), pulse)
+    OPT_DEFS += -DTHEME_PULSE
+endif
+
+ifeq ($(strip $(THEME)), laser)
+    OPT_DEFS += -DTHEME_LASER
+endif

keyboards/crkbd/rev1/matrix.c

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -96,37 +96,38 @@ uint8_t matrix_cols(void)
 void tx_rx_leds_init(void)
 {
 #ifndef NO_DEBUG_LEDS
-    TX_RX_LED_INIT;
-    TXLED0;
-    RXLED0;
+    setPinOutput(B0);
+    setPinOutput(D5);
+    writePinHigh(B0);
+    writePinHigh(D5);
 #endif
 }
 
 void tx_led_on(void)
 {
 #ifndef NO_DEBUG_LEDS
-    TXLED1;
+    writePinLow(D5);
 #endif
 }
 
 void tx_led_off(void)
 {
 #ifndef NO_DEBUG_LEDS
-    TXLED0;
+    writePinHigh(D5);
 #endif
 }
 
 void rx_led_on(void)
 {
 #ifndef NO_DEBUG_LEDS
-    RXLED1;
+    writePinLow(B0);
 #endif
 }
 
 void rx_led_off(void)
 {
 #ifndef NO_DEBUG_LEDS
-    RXLED0;
+    writePinHigh(B0);
 #endif
 }
 

keyboards/cu80/rules.mk

@@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug

keyboards/db/db63/config.h

@@ -37,7 +37,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 18
 #define RGBLIGHT_ANIMATIONS
 
-#define NO_UART 1
-
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3

keyboards/doro67/multi/config.h

@@ -3,8 +3,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0xD070
+#define VENDOR_ID       0x4250 // BP for Backprop
+#define PRODUCT_ID      0x4D4C // ML for Multi
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Backprop Studio
 #define PRODUCT         Doro67 Multi PCB

keyboards/doro67/multi/keymaps/via/keymap.c

@@ -0,0 +1,76 @@
+/* Copyright 2019 ShadeDream
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [0] = LAYOUT_65_ansi_blocker(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_INS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGUP,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    /* Fn layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│       │   │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │BLTog│BLS│BL-│BL+│Rst│   │   │   │   │   │   │   │   │     │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │      │   │   │   │   │   │   │   │   │   │   │   │        │   │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │        │   │   │   │   │   │   │   │   │   │   │      │   │   │
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │    │    │    │                        │    │    │ │   │   │   │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [1] = LAYOUT_65_ansi_blocker(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,          _______,
+        BL_TOGG, BL_STEP, BL_DEC,  BL_INC,  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______
+    ),
+
+    [2] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+     [3] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+};

keyboards/doro67/multi/keymaps/via/readme.md

@@ -0,0 +1,43 @@
+# Default Doro67 ANSI layout.
+
+**THIS IS THE DEFAULT ANSI KEYMAP (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "multi" directory includes keymaps for the multi-layout PCB, which supports ANSI, ISO, and multi (split backspace & non-blocker).
+The keymap you choose from the "multi" directory must correspond to the integrated plate option you chose.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased an RGB PCB, please see the 'rgb' directory.
+
+This is the default ANSI layout that comes flashed on the Doro67 multi PCB with
+the exception of adding backtick as it was not mapped.
+
+Default layer:
+
+```
+┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+│Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│
+├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+│ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
+├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+│ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+│ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
+├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+│LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
+└────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+```
+
+Fn layer:
+
+```
+┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+│ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│       │   │
+├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+│BLTog│BLS│BL-│BL+│Rst│   │   │   │   │   │   │   │   │     │   │
+├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+│      │   │   │   │   │   │   │   │   │   │   │   │        │   │
+├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+│        │   │   │   │   │   │   │   │   │   │   │      │   │   │
+├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+│    │    │    │                        │    │    │ │   │   │   │
+└────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+```

keyboards/doro67/multi/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/doro67/regular/config.h

@@ -3,8 +3,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
+#define VENDOR_ID       0x4250 // BP for Backprop
+#define PRODUCT_ID      0x5245 // RE for Regular
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Backprop Studio
 #define PRODUCT         Doro67 Regular PCB
@@ -28,4 +28,3 @@
 #define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, C7, F5, F6, F7 }
 
 #define DIODE_DIRECTION COL2ROW
-

keyboards/doro67/regular/keymaps/via/keymap.c

@@ -0,0 +1,76 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [0] = LAYOUT_65_ansi_blocker(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    /* Fn layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│       │   │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │     │   │   │   │Rst│   │   │   │   │   │   │   │   │     │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │      │   │   │   │   │   │   │   │   │   │   │   │        │   │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │        │   │   │   │   │   │   │   │   │   │   │      │   │   │
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │    │    │    │                        │    │    │ │   │   │   │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [1] = LAYOUT_65_ansi_blocker(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+    [2] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+    [3] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+};

keyboards/doro67/regular/keymaps/via/readme.md

@@ -0,0 +1,5 @@
+# The default keymap for doro67
+
+**THIS IS THE DEFAULT KEYMAP DIRECTORY (AVAILABILITY: CHINA GB ONLY)**
+If you are a non-china buyer, you probably have the multi PCB or rgb PCB. 
+Please look at the "multi" and "rgb" readme files.

keyboards/doro67/regular/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/doro67/rgb/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
+#define VENDOR_ID       0x4250 // BP for Backprop
+#define PRODUCT_ID      0x5247 // RG for RGB
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Backprop Studio
 #define PRODUCT         Doro67 RGB PCB

keyboards/doro67/rgb/keymaps/via/keymap.c

@@ -0,0 +1,77 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [0] = LAYOUT_65_ansi_blocker(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    /* Fn layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│       │   │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │BEST │URL│   │   │Rst│   │   │   │   │   │   │   │   │     │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │ RGB  │Mo+│Hu+│Sa+│Va+│Sp+│   │   │   │   │   │   │        │   │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │        │Mo-│Hu-│Sa-│Va-│Sp-│   │   │   │   │   │      │   │   │
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │    │    │    │                        │    │    │ │   │   │   │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [1] = LAYOUT_65_ansi_blocker(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______,  _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+    [2] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+    [3] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+};
+

keyboards/doro67/rgb/keymaps/via/readme.md

@@ -0,0 +1,7 @@
+# The default keymap for rgb
+
+**RGB PCB (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "rgb" directory includes the keymap for the RGB PCB.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased a non-rgb PCB, please see the 'multi' directory.

keyboards/doro67/rgb/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/dztech/dz60rgb/keymaps/via/keymap.c

@@ -0,0 +1,39 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_GESC,        KC_1,    KC_2,            KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,         KC_EQL,  KC_BSPC,
+        KC_TAB,         KC_Q,    KC_W,            KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,         KC_RBRC, KC_BSLS,
+        CTL_T(KC_CAPS), KC_A,    KC_S,            KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                  KC_ENT,
+        KC_LSFT,                 KC_Z,            KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  RSFT_T(KC_SLSH), KC_UP,   LT(2, KC_DEL),
+        KC_LCTL,        KC_LGUI, LM(1, MOD_LALT),                            KC_SPC,                    KC_RALT, MO(1),   KC_LEFT,         KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        TO(3),   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, KC_UP,   _______, _______, _______, KC_CALC, _______, KC_INS,  _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP,          EEP_RST,
+        _______,          _______, _______, _______, _______, _______, NK_TOGG, _______, _______, KC_END,  KC_PGDN, KC_VOLU, KC_MUTE,
+        _______, _______, _______,                            TO(4),                     _______, _______, KC_MPRV, KC_VOLD, KC_MNXT
+    ),
+    [2] = LAYOUT(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______,          EEP_RST,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______, _______, _______
+    ),
+    [3] = LAYOUT(
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS, _______, _______, _______, _______, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS, _______,
+        _______, KC_P7,   KC_P8,   KC_P9,   _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   _______, _______, TO(0),
+        _______, KC_P4,   KC_P5,   KC_P6,   _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   _______,          KC_PENT,
+        _______,          KC_P1,   KC_P2,   KC_P3,   _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   _______, _______,
+        _______, KC_P0,   KC_PDOT,                            KC_PENT,                   KC_P0,   KC_PDOT, _______, _______, _______
+    ),
+    [4] = LAYOUT(
+        KC_GESC,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,         KC_EQL,  KC_BSPC,
+        KC_TAB,         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,         KC_RBRC, KC_BSLS,
+        CTL_T(KC_CAPS), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                  KC_ENT,
+        KC_LSFT,                 KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  RSFT_T(KC_SLSH), KC_UP,   LT(2, KC_DEL),
+        KC_LCTL,        KC_LALT, KC_LGUI,                            KC_SPC,                    KC_RALT, TO(0),   KC_LEFT,         KC_DOWN, KC_RGHT
+    )
+};

keyboards/dztech/dz60rgb/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/dztech/dz60rgb/v1/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x1219
+#define VENDOR_ID       0x445A
+#define PRODUCT_ID      0x1120
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ60RGB

keyboards/dztech/dz60rgb/v2/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x1219
+#define VENDOR_ID       0x445A
+#define PRODUCT_ID      0x1121
 #define DEVICE_VER      0x0002
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ60RGB

keyboards/dztech/dz60rgb_wkl/keymaps/via/keymap.c

@@ -0,0 +1,32 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_60_tsangan_hhkb(
+        KC_GESC,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
+        KC_TAB,         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+        CTL_T(KC_CAPS), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,                 KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(2),
+        KC_LCTL,        KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RALT, MO(1),   KC_RCTL
+    ),
+    [1] = LAYOUT_60_tsangan_hhkb(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, KC_UP,   _______, _______, _______, KC_CALC, _______, KC_INS,  _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP,          _______,
+        KC_MPRV,          KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, NK_TOGG, _______, _______, KC_END,  KC_PGDN, KC_MNXT, _______,
+        _______, _______, _______,                            _______,                                     _______, _______, _______
+    ),
+    [2] = LAYOUT_60_tsangan_hhkb(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  _______,
+        _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                                     _______, _______, _______
+    ),
+    [3] = LAYOUT_60_tsangan_hhkb(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                                     _______, _______, _______
+    )
+};

keyboards/dztech/dz60rgb_wkl/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/dztech/dz60rgb_wkl/v1/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x1221
+#define VENDOR_ID       0x445A
+#define PRODUCT_ID      0x1320
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ60RGB_WKL

keyboards/dztech/dz60rgb_wkl/v2/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x1221
+#define VENDOR_ID       0x445A
+#define PRODUCT_ID      0x1321
 #define DEVICE_VER      0x0002
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ60RGB_WKL

keyboards/dztech/dz65rgb/keymaps/via/keymap.c

@@ -0,0 +1,32 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_65_ansi(
+        KC_GESC,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
+        KC_TAB,         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        CTL_T(KC_CAPS), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGDN,
+        KC_LSFT,                 KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+        KC_LCTL,        KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_65_ansi(
+        KC_GESC,        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_HOME,
+        _______,        RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,   KC_PGUP,
+        CTL_T(KC_CAPS), RGB_SPI, RGB_SPD, _______, _______, _______, _______, _______, _______, _______, _______, _______,          EEP_RST, KC_PGDN,
+        KC_LSFT,                 _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, KC_VOLU, KC_MUTE,
+        _______,        _______, _______,                            _______,                   _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT
+    ),
+    [2] = LAYOUT_65_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______, _______, _______, _______
+    ),
+    [3] = LAYOUT_65_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______, _______, _______, _______
+    )
+};