Fix the path for generated keymaps (#9213)

You can now use `qmk info` to get information about keyboards and keymaps.

Co-authored-by: Erovia <Erovia@users.noreply.github.com>

docs/breaking_changes.md

@@ -102,7 +102,7 @@ This happens immediately after the previous `future` branch is merged.
     * [ ] Roll up the ChangeLog into one file.
     * [ ] `git commit -m 'Merge point for <DATE> Breaking Change'`
     * [ ] `git push origin future`
-* Github Actions
+* GitHub Actions
     * [ ] Create a PR for `future`
     * [ ] Make sure travis comes back clean
     * [ ] Merge `future` PR

docs/cli_commands.md

@@ -6,6 +6,8 @@
 
 This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
 
+This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
+
 **Usage for Configurator Exports**:
 
 ```
@@ -73,8 +75,9 @@ $ qmk compile -kb dz60
 
 ## `qmk flash`
 
-This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
-To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
+This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default. To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
+
+This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
 
 **Usage for Configurator Exports**:
 
@@ -128,6 +131,32 @@ Check your environment and report problems only:
 
     qmk doctor -n
 
+## `qmk info`
+
+Displays information about keyboards and keymaps in QMK. You can use this to get information about a keyboard, show the layouts, display the underlying key matrix, or to pretty-print JSON keymaps.
+
+**Usage**:
+
+```
+qmk info [-f FORMAT] [-m] [-l] [-km KEYMAP] [-kb KEYBOARD]
+```
+
+This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
+
+**Examples**:
+
+Show basic information for a keyboard:
+
+    qmk info -kb planck/rev5
+
+Show the matrix for a keyboard:
+
+    qmk info -kb ergodox_ez -m
+
+Show a JSON keymap for a keyboard:
+
+    qmk info -kb clueboard/california -km default
+
 ## `qmk json2c`
 
 Creates a keymap.c from a QMK Configurator export.
@@ -152,6 +181,8 @@ qmk list-keyboards
 
 This command lists all the keymaps for a specified keyboard (and revision).
 
+This command is directory aware. It will automatically fill in KEYBOARD if you are in a keyboard directory.
+
 **Usage**:
 
 ```
@@ -162,6 +193,8 @@ qmk list-keymaps -kb planck/ez
 
 This command creates a new keymap based on a keyboard's existing default keymap.
 
+This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
+
 **Usage**:
 
 ```

docs/cli_configuration.md

@@ -108,7 +108,7 @@ compile.keymap: skully -> None
 |-----|---------------|-------------|
 | user.keyboard | None | The keyboard path (Example: `clueboard/66/rev4`) |
 | user.keymap | None | The keymap name (Example: `default`) |
-| user.name | None | The user's github username. |
+| user.name | None | The user's GitHub username. |
 
 # All Configuration Options
 

docs/cli_development.md

@@ -210,7 +210,7 @@ Our tests can be found in `lib/python/qmk/tests/`. You will find both unit and i
 
 If your PR does not include a comprehensive set of tests please add comments like this to your code so that other people know where they can help:
 
-    # TODO(unassigned/<yourGithubUsername>): Write <unit|integration> tests
+    # TODO(unassigned/<your_github_username>): Write <unit|integration> tests
 
 We use [nose2](https://nose2.readthedocs.io/en/latest/getting_started.html) to run our tests. You can refer to the nose2 documentation for more details on what you can do in your test functions.
 

docs/configurator_step_by_step.md

@@ -12,7 +12,7 @@ I'll say that again because it's important:
 
 !> **MAKE SURE YOU SELECT THE RIGHT VERSION!**
 
-If your keyboard has been advertised to be powered by QMK but is not in the list, chances are a developer hasn't gotten to it yet or we haven't had a chance to merge it in yet. File an issue at [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) requesting to support that particular keyboard, if there is no active [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) for it. There are also QMK powered keyboards that are in their manufacturer's own github accounts. Double check for that as well.  <!-- FIXME(skullydazed): This feels too wordy and I'm not sure we want to encourage these kinds of issues. Also, should we prompt them to bug the manufacutrer? -->
+If your keyboard has been advertised to be powered by QMK but is not in the list, chances are a developer hasn't gotten to it yet or we haven't had a chance to merge it in yet. File an issue at [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) requesting to support that particular keyboard, if there is no active [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) for it. There are also QMK powered keyboards that are in their manufacturer's own GitHub accounts. Double check for that as well.  <!-- FIXME(skullydazed): This feels too wordy and I'm not sure we want to encourage these kinds of issues. Also, should we prompt them to bug the manufacutrer? -->
 
 ## Step 2: Select Your Keyboard Layout
 

docs/de/README.md

@@ -13,7 +13,7 @@ QMK (*Quantum Mechanical Keyboard*) ist eine Open-Source-Community, welche die Q
 
 ## Bezugsquelle für QMK
 
-Wenn Du vorhast, deine Tastatur, Tastaturbelegung oder Features zu QMK beizusteuern, geht das am einfachsten, indem Du das [Repository auf Github](https://github.com/qmk/qmk_firmware#fork-destination-box) forkst, die Änderungen in deinem lokalen Repo vornimmst und anschließend einen [Pull Request](https://github.com/qmk/qmk_firmware/pulls) einreichst.
+Wenn Du vorhast, deine Tastatur, Tastaturbelegung oder Features zu QMK beizusteuern, geht das am einfachsten, indem Du das [Repository auf GitHub](https://github.com/qmk/qmk_firmware#fork-destination-box) forkst, die Änderungen in deinem lokalen Repo vornimmst und anschließend einen [Pull Request](https://github.com/qmk/qmk_firmware/pulls) einreichst.
 
 Ansonsten kannst Du es als [zip](https://github.com/qmk/qmk_firmware/zipball/master) oder [tar](https://github.com/qmk/qmk_firmware/tarball/master) herunterladen, oder es direkt via git klonen (`git clone git@github.com:qmk/qmk_firmware.git` bzw. `git clone https://github.com/qmk/qmk_firmware.git`).
 

docs/de/_summary.md

@@ -11,7 +11,7 @@
   * [QMK CLI](de/cli.md)
   * [QMK CLI Konfiguration](de/cli_configuration.md)
   * [Zu QMK beitragen](de/contributing.md)
-  * [Anleitung für Github](de/getting_started_github.md)
+  * [Anleitung für GitHub](de/getting_started_github.md)
   * [Nach Hilfe fragen](de/getting_started_getting_help.md)
 
 * [Breaking Changes](de/breaking_changes.md)

docs/de/newbs_learn_more_resources.md

@@ -6,7 +6,7 @@ Git Ressourcen:
 
 * [Gutes allgemeines Tutorial](https://www.codecademy.com/learn/learn-git) (auf Englisch)
 * [Git spielerisch anhand von Beispielen lernen](https://learngitbranching.js.org/) (auf Englisch)
-* [Mehr über den allgemeinen Umgang mit Github](getting_started_github.md)
+* [Mehr über den allgemeinen Umgang mit GitHub](getting_started_github.md)
 * [Mehr über Git im Bezug zu QMK](contributing.md)
 
 Mehr über die Arbeit mit der Befehlszeile:

docs/es/README.md

@@ -13,7 +13,7 @@ QMK (*Quantum Mechanical Keyboard*) es una comunidad open source que mantiene el
 
 ## Cómo conseguirlo
 
-Si estás pensando en contribuir con un keymap, teclado, or característica a QMK, la manera más sencilla es hacer un [fork del repositorio en Github](https://github.com/qmk/qmk_firmware#fork-destination-box), y clonar tu repositorio localmente para hacer los cambios, subirlos, y abir un [Pull Request](https://github.com/qmk/qmk_firmware/pulls) desde tu fork.
+Si estás pensando en contribuir con un keymap, teclado, or característica a QMK, la manera más sencilla es hacer un [fork del repositorio en GitHub](https://github.com/qmk/qmk_firmware#fork-destination-box), y clonar tu repositorio localmente para hacer los cambios, subirlos, y abir un [Pull Request](https://github.com/qmk/qmk_firmware/pulls) desde tu fork.
 
 De cualquier manera, también puedes descargarlo directamente en formatos ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), o clonarlo via git (`git@github.com:qmk/qmk_firmware.git`), o https (`https://github.com/qmk/qmk_firmware.git`).
 

docs/es/_summary.md

@@ -11,7 +11,7 @@
   * [QMK CLI](es/cli.md)
   * [Configuración de QMK CLI](es/cli_configuration.md)
   * [Contribuyendo a QMK](es/contributing.md)
-  * [Cómo usar Github](es/getting_started_github.md)
+  * [Cómo usar GitHub](es/getting_started_github.md)
   * [Obtener ayuda](es/getting_started_getting_help.md)
 
 * [Cambios incompatibles](es/breaking_changes.md)

docs/es/newbs_best_practices.md

@@ -6,7 +6,7 @@ Este documento procura instruir a los novatos en las mejores prácticas para ten
 
 En este documento suponemos un par de cosas:
 
-1. Tienes una cuenta de Github, y has hecho un [fork del repo qmk_firmware](getting_started_github.md) en tu cuenta.
+1. Tienes una cuenta de GitHub, y has hecho un [fork del repo qmk_firmware](getting_started_github.md) en tu cuenta.
 2. Has [configurado tu entorno de desarrollo](newbs_getting_started.md?id=environment-setup).
 
 

docs/es/newbs_building_firmware_configurator.md

@@ -21,7 +21,7 @@ Lo diré otra vez porque es importante
 
 !> **ASEGÚRATE DE QUE SELECCIONAS LA VERSIÓN CORRECTA!**
 
-Si se ha anunciado que tu teclado funciona con QMK pero no está en la lista, es probable que un desarrollador no se haya encargado de él aún o que todavía no hemos tenido la oportunidad de incluirlo. Abre un issue en [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) solicitando soportar ese teclado un particular, si no hay un [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) activo para ello. Hay también teclados que funcionan con QMK que están en las cuentas de github de sus manufacturantes. Acuérdate de comprobar esto también. 
+Si se ha anunciado que tu teclado funciona con QMK pero no está en la lista, es probable que un desarrollador no se haya encargado de él aún o que todavía no hemos tenido la oportunidad de incluirlo. Abre un issue en [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) solicitando soportar ese teclado un particular, si no hay un [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) activo para ello. Hay también teclados que funcionan con QMK que están en las cuentas de GitHub de sus manufacturantes. Acuérdate de comprobar esto también.
 
 ## Eligiendo el layout de tu teclado
 

docs/es/newbs_learn_more_resources.md

@@ -6,7 +6,7 @@ Recursos de Git:
 
 * [Excelente tutorial general](https://www.codecademy.com/learn/learn-git)
 * [Juego de Git para aprender usando ejemplos](https://learngitbranching.js.org/)
-* [Recursos de Git para aprender más sobre Github](getting_started_github.md)
+* [Recursos de Git para aprender más sobre GitHub](getting_started_github.md)
 * [Recursos de Git dirigidos específicamente a QMK](contributing.md)
 
 

docs/feature_pointing_device.md

@@ -27,20 +27,17 @@ In the following example, a custom key is used to click the mouse and scroll 127
 
 ```c
 case MS_SPECIAL:
-	report_mouse_t currentReport = pointing_device_get_report();
-    if (record->event.pressed)
-    {
+    report_mouse_t currentReport = pointing_device_get_report();
+    if (record->event.pressed) {
         currentReport.v = 127;
-		currentReport.h = 127;
-		currentReport.buttons |= MOUSE_BTN1; //this is defined in report.h
-    }
-    else
-    {
+        currentReport.h = 127;
+        currentReport.buttons |= MOUSE_BTN1;  // this is defined in report.h
+    } else {
         currentReport.v = -127;
         currentReport.h = -127;
         currentReport.buttons &= ~MOUSE_BTN1;
     }
-	pointing_device_set_report(currentReport);
+    pointing_device_set_report(currentReport);
     break;
 ```
 

docs/feature_userspace.md

@@ -1,6 +1,6 @@
 # Userspace: Sharing Code Between Keymaps
 
-If you use more than one keyboard with a similar keymap, you might see the benefit in being able to share code between them. Create your own folder in `users/` named the same as your keymap (ideally your github username, `<name>`) with the following structure:
+If you use more than one keyboard with a similar keymap, you might see the benefit in being able to share code between them. Create your own folder in `users/` named the same as your keymap (ideally your GitHub username, `<name>`) with the following structure:
 
 * `/users/<name>/` (added to the path automatically)
   * `readme.md` (optional, recommended)
@@ -73,7 +73,7 @@ The reason for this, is that `<name>.h` won't be added in time to add settings (
 
 ## Readme (`readme.md`)
 
-Please include authorship (your name, github username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
+Please include authorship (your name, GitHub username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
 
 You can use this as a template: 
 ```
@@ -93,7 +93,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 ```
 
-You'd want to replace the year, name, email and github username with your info. 
+You'd want to replace the year, name, email and GitHub username with your info. 
 
 Additionally, this is a good place to document your code, if you wish to share it with others. 
 

docs/fr-fr/README.md

@@ -4,8 +4,8 @@
 [![Statut du build](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware)
 [![Discord](https://img.shields.io/discord/440868230475677696.svg)](https://discord.gg/Uq7gcHh)
 [![Statut de la doc](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm)
-[![Contributeurs Github](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
-[![Forks Github](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
+[![Contributeurs GitHub](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
+[![Forks GitHub](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
 
 ## Qu'est-ce que QMK Firmware ?
 
@@ -13,7 +13,7 @@ QMK (*Quantum Mechanical Keyboard*) est une communauté open source qui maintien
 
 ## Comment l'obtenir
 
-Si vous souhaitez contribuer à une disposition de clavier (keymap), ou à des fonctionnalités de QMK alors le plus simple est de [forker le dépôt avec Github](https://github.com/qmk/qmk_firmware#fork-destination-box) puis cloner le dépôt localement pour y faire des changements. Vous pourrez pousser vos changements sur github puis ouvrir un [Pull Request](https://github.com/qmk/qmk_firmware/pulls) depuis votre fork Github.
+Si vous souhaitez contribuer à une disposition de clavier (keymap), ou à des fonctionnalités de QMK alors le plus simple est de [forker le dépôt avec GitHub](https://github.com/qmk/qmk_firmware#fork-destination-box) puis cloner le dépôt localement pour y faire des changements. Vous pourrez pousser vos changements sur GitHub puis ouvrir un [Pull Request](https://github.com/qmk/qmk_firmware/pulls) depuis votre fork GitHub.
 
 Sinon, vous pouvez aussi le télécharger directement en ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), ou le cloner avec git en ssh (`git@github.com:qmk/qmk_firmware.git`), ou https (`https://github.com/qmk/qmk_firmware.git`).
 

docs/fr-fr/breaking_changes.md

@@ -101,7 +101,7 @@ Ceci est fait immédiatement après la fusion de la branche `future` précédent
     * [ ] Regroupe ChangeLog dans un fichier.
     * [ ] `git commit -m 'Merge point for <DATE> Breaking Change'`
     * [ ] `git push origin future`
-* Actions sur Github
+* Actions sur GitHub
     * [ ] Crée un PR pour `future`
     * [ ] S'assurer que Travis ne relève aucun problème
     * [ ] Fusion le PR `future`

docs/fr-fr/getting_started_github.md

@@ -6,11 +6,11 @@ GitHub peut être un peu compliqué pour ceux qui n'y sont pas familier. Ce guid
 
 Commencez par la [page GitHub de QMK](https://github.com/qmk/qmk_firmware), et vous verrez un bouton dans le coin en haut à droite qui indique "Fork":
 
-![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
+![Fork on GitHub](http://i.imgur.com/8Toomz4.jpg)
 
 Si vous faites partie d'une organisation, vous aurez besoin de savoir quel compte utiliser pour le fork. Dans la plupart des cas, vous voudrez créer le fork dans votre compte personnel. Une fois le fork complet (cela peut quelques fois prendre un peu de temps), appuyez sur le bouton "Clone or download":
 
-![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
+![Download from GitHub](http://i.imgur.com/N1NYcSz.jpg)
 
 Faites attention à sélectionner "HTTPS", et sélectionnez le lien et copiez-le:
 

docs/fr-fr/newbs_best_practices.md

@@ -44,7 +44,7 @@ git pull upstream master
 git push origin master
 ```
 
-Cela vous change la branche courante en master, synchronise les données de références du dépôt QMK vers votre ordinateur. La commande pull tire les données de références vers votre branche courante puis les y téleverse. La commande push permet de pousser la branche courante (master) vers votre fork github.
+Cela vous change la branche courante en master, synchronise les données de références du dépôt QMK vers votre ordinateur. La commande pull tire les données de références vers votre branche courante puis les y téleverse. La commande push permet de pousser la branche courante (master) vers votre fork GitHub.
 
 ### Faire des changements
 

docs/getting_started_github.md

@@ -1,16 +1,16 @@
-# How to Use Github with QMK
+# How to Use GitHub with QMK
 
-Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
+GitHub can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
 
 ?> This guide assumes you're somewhat comfortable with running things at the command line, and have git installed on your system.
 
-Start on the [QMK Github page](https://github.com/qmk/qmk_firmware), and you'll see a button in the upper right that says "Fork":
+Start on the [QMK GitHub page](https://github.com/qmk/qmk_firmware), and you'll see a button in the upper right that says "Fork":
 
-![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
+![Fork on GitHub](http://i.imgur.com/8Toomz4.jpg)
 
 If you're a part of an organization, you'll need to choose which account to fork it to. In most circumstances, you'll want to fork it to your personal account. Once your fork is completed (sometimes this takes a little while), click the "Clone or Download" button:
 
-![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
+![Download from GitHub](http://i.imgur.com/N1NYcSz.jpg)
 
 And be sure to select "HTTPS", and select the link and copy it:
 
@@ -54,7 +54,7 @@ To https://github.com/whoeveryouare/qmk_firmware.git
  + 20043e64...7da94ac5 master -> master
 ```
 
-Your changes now exist on your fork on Github - if you go back there (`https://github.com/<whoeveryouare>/qmk_firmware`), you can create a "New Pull Request" by clicking this button:
+Your changes now exist on your fork on GitHub - if you go back there (`https://github.com/<whoeveryouare>/qmk_firmware`), you can create a "New Pull Request" by clicking this button:
 
 ![New Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
 

docs/he-il/README.md

@@ -14,7 +14,7 @@ QMK (*Quantum Mechanical Keyboard*) היא קהילת קוד פתוח (open sour
 
 ## איך להשיג אותה
 
-אם אתם מתכננים לתרום מיפוי מקשים, מקלדת או יכולת ל QMK, הדבר הקל ביותר הוא  [לעשות פורק לריפו בGithub](https://github.com/qmk/qmk_firmware#fork-destination-box), ולעשות קלון לריפו בסביבה המקומית ושם לבצע את השינויים שלכם, לדחוף אותם ולפתוח  [Pull Request](https://github.com/qmk/qmk_firmware/pulls) מהפורק שלך.
+אם אתם מתכננים לתרום מיפוי מקשים, מקלדת או יכולת ל QMK, הדבר הקל ביותר הוא  [לעשות פורק לריפו בGitHub](https://github.com/qmk/qmk_firmware#fork-destination-box), ולעשות קלון לריפו בסביבה המקומית ושם לבצע את השינויים שלכם, לדחוף אותם ולפתוח  [Pull Request](https://github.com/qmk/qmk_firmware/pulls) מהפורק שלך.
 
 אחרת, אפשר להוריד את הקושחה באופן ישיר ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), או לשכפל אותה באמצעות git (`git@github.com:qmk/qmk_firmware.git`), או https (`https://github.com/qmk/qmk_firmware.git`).
 

docs/he-il/_summary.md

@@ -5,7 +5,7 @@
   * [מקורות ללמידה](he-il/newbs_learn_more_resources.md)
 * [בסיס QMK](he-il/README.md)
     * [מבוא לQMK](he-il/getting_started_introduction.md)
-    * [איך להשתמש בGithub](he-il/getting_started_github.md)
+    * [איך להשתמש בGitHub](he-il/getting_started_github.md)
     * [קבלת עזרה](he-il/getting_started_getting_help.md)
 * [שאלות נפוצות](he-il/faq.md)
     * [שאלות נפוצות כלליות](he-il/faq_general.md)
@@ -27,7 +27,7 @@
   * [QMK CLI](he-il/cli.md)
   * [QMK CLI Config](he-il/cli_configuration.md)
   * [תרומה ל QMK](he-il/contributing.md)
-  * [איך להשתמש בGithub](he-il/getting_started_github.md)
+  * [איך להשתמש בGitHub](he-il/getting_started_github.md)
   * [קבלת עזרה](he-il/getting_started_getting_help.md)
 
 * [שינויים משמעותיים](he-il/breaking_changes.md)

docs/he-il/getting_started_getting_help.md

@@ -11,7 +11,7 @@
 
 הפורום הרשמי של QMK נמצא ב - [/r/olkb](https://reddit.com/r/olkb) באתר [reddit.com](https://reddit.com).
 
-## סוגיות Github
+## סוגיות GitHub
 
 ניתן לפתוח [סוגייה ב-GitHub](https://github.com/qmk/qmk_firmware/issues). הדבר שימושי במיוחד כאשר הסוגיה דורשת דיון עמוק וארוך או דיבאגינג.
 </div>

docs/he-il/getting_started_github.md

@@ -1,17 +1,17 @@
 <div dir="rtl" markdown="1">
-# איך להשתמש ב-Github עם QMK
+# איך להשתמש ב-GitHub עם QMK
 
-Github עלול להיות קצת טריקי למי שלא מכיר את העבודה איתו - מדריך זה ילווה אתכם שלב אחר שלב דרך ביצוע פעולות fork, clone ו-pull request עם QMK.
+GitHub עלול להיות קצת טריקי למי שלא מכיר את העבודה איתו - מדריך זה ילווה אתכם שלב אחר שלב דרך ביצוע פעולות fork, clone ו-pull request עם QMK.
 
 ?> מדריך זה מניח שאתם מרגישים בנוח עם הרצה של פקודות בסביבת command line (שורת הפקודה) ו-git מותקן במערכת שלכם.
 
-התחילו ב- [עמוד של QMK ב-Github](https://github.com/qmk/qmk_firmware), ותצמאו כפתור בחלק העליון מימין עם התיכוב "Fork":
+התחילו ב- [עמוד של QMK ב-GitHub](https://github.com/qmk/qmk_firmware), ותצמאו כפתור בחלק העליון מימין עם התיכוב "Fork":
 
-![Fork ב-Github](http://i.imgur.com/8Toomz4.jpg)
+![Fork ב-GitHub](http://i.imgur.com/8Toomz4.jpg)
 
 אם אתם חלק מארגון, תצטרכו לבחור לאיזה חשבון לבצע פעולת fork. ברוב המבקרים, תרצו לבצע fork לתוך החשבון הפרטי שלכם. ברגע שה-fork הסתיים (לפעמים זה יכול לקחת קצת זמן) הקליקו על כפתור ה-"Clone or Download":
 
-![הורדה מ-Github](http://i.imgur.com/N1NYcSz.jpg)
+![הורדה מ-GitHub](http://i.imgur.com/N1NYcSz.jpg)
 
 תוודאו שאתם בוחרים באופצייה של  "HTTPS", בחרו את הקישור והעתיקו אותו:
 

docs/ja/cli_configuration.md

@@ -113,7 +113,7 @@ compile.keymap: skully -> None
 |-----|---------------|-------------|
 | user.keyboard | None | キーボードのパス (例: `clueboard/66/rev4`) |
 | user.keymap | None | キーマップ名 (例: `default`) |
-| user.name | None | ユーザの github のユーザ名。 |
+| user.name | None | ユーザの GitHub のユーザ名。 |
 
 # 全ての設定オプション
 

docs/ja/feature_pointing_device.md

@@ -0,0 +1,49 @@
+# ポインティングデバイス :id=pointing-device
+
+<!---
+  original document: 0.8.182:docs/feature_pointing_device.md
+  git diff 0.8.182 HEAD -- docs/feature_pointing_device.md | cat
+-->
+
+ポインティングデバイスは汎用的な機能の総称です: システムポインタを移動します。マウスキーのような他のオプションも確かにありますが、これは簡単に変更可能で軽量であることを目指しています。機能を制御するためにカスタムキーを実装したり、他の周辺機器から情報を収集してここに直接挿入したりできます - QMK に処理を任せてください。
+
+ポインティングデバイスを有効にするには、rules.mk の以下の行のコメントを解除します:
+
+```makefile
+POINTING_DEVICE_ENABLE = yes
+```
+
+マウスレポートを操作するために、以下の関数を使うことができます:
+
+* `pointing_device_get_report()` - ホストコンピュータに送信された情報を表す現在の report_mouse_t を返します。
+* `pointing_device_set_report(report_mouse_t newMouseReport)` - ホストコンピュータに送信される report_mouse_t を上書き保存します。
+
+report_mouse_t (ここでは "mouseReport") が以下のプロパティを持つことを覚えておいてください:
+
+* `mouseReport.x` - これは、x軸の動き(+ 右へ、- 左へ)を表す -127 から 127 (128ではなく、USB HID 仕様で定義されています)の符号付き整数です。
+* `mouseReport.y` - これは、y軸の動き(+ 上へ、- 下へ)を表す -127 から 127 (128ではなく、USB HID 仕様で定義されています)の符号付き整数です。
+* `mouseReport.v` - これは、垂直スクロール(+ 上へ、- 下へ)を表す -127 から 127 (128ではなく、USB HID 仕様で定義されています)の符号付き整数です。
+* `mouseReport.h` - これは、水平スクロール(+ 右へ、- 左へ)を表す -127 から 127 (128ではなく、USB HID 仕様で定義されています)の符号付き整数です。
+* `mouseReport.buttons` - これは uint8_t で、上位の5ビットを使っています。これらのビットはマウスボタンの状態を表します - ビット 3 はマウスボタン 5、ビット 7 はマウスボタン 1 です。
+
+マウスレポートが送信されると、x、y、v、h のいずれの値も 0 に設定されます (これは "pointing_device_send()" で行われます。この挙動を回避するためにオーバーライドすることができます)。このように、ボタンの状態は持続しますが、動きは1度だけ起こります。さらにカスタマイズするために、`pointing_device_init` と `pointing_device_task` のどちらもオーバーライドすることができます。
+
+以下の例では、カスタムキーを使ってマウスをクリックし垂直および水平方向に127単位スクロールし、リリースされた時にそれを全て元に戻します - なぜならこれは完全に便利な機能だからです。いいですか、以下はひとつの例です:
+
+```c
+case MS_SPECIAL:
+	report_mouse_t currentReport = pointing_device_get_report();
+    if (record->event.pressed) {
+        currentReport.v = 127;
+        currentReport.h = 127;
+        currentReport.buttons |= MOUSE_BTN1;  // this is defined in report.h
+    } else {
+        currentReport.v = -127;
+        currentReport.h = -127;
+        currentReport.buttons &= ~MOUSE_BTN1;
+    }
+	pointing_device_set_report(currentReport);
+    break;
+```
+
+マウスレポートは送信されるたびに 0 (ボタンを除く)に設定されることを思い出してください。そのため、スクロールはそれぞれの場合に1度だけ発生します。

docs/ja/getting_started_github.md

@@ -1,15 +1,15 @@
-# QMK で Github を使う方法
+# QMK で GitHub を使う方法
 
 <!---
   original document: 0.8.82:docs/getting_started_github.md
   git diff 0.8.82 HEAD -- docs/getting_started_github.md | cat
 -->
 
-Github は慣れていない人には少し注意が必要です - このガイドは、QMK におけるフォーク、クローン、プルリクエストのサブミットの各ステップについて説明します。
+GitHub は慣れていない人には少し注意が必要です - このガイドは、QMK におけるフォーク、クローン、プルリクエストのサブミットの各ステップについて説明します。
 
 ?> このガイドでは、あなたがコマンドラインでの実行にある程度慣れており、システムに git がインストールされていることを前提にしています。
 
-[QMK Github ページ](https://github.com/qmk/qmk_firmware)を開くと、右上に "Fork" というボタンが見えます:
+[QMK GitHub ページ](https://github.com/qmk/qmk_firmware)を開くと、右上に "Fork" というボタンが見えます:
 
 ![Git でのフォーク](http://i.imgur.com/8Toomz4.jpg)
 
@@ -59,7 +59,7 @@ To https://github.com/whoeveryouare/qmk_firmware.git
  + 20043e64...7da94ac5 master -> master
 ```
 
-あなたの変更は今では Github 上のフォークにあります - フォーク (`https://github.com/<whoeveryouare>/qmk_firmware`)に戻ると、"New Pull Request" ボタンをクリックすることで新しいプルリクエストを作成することができます:
+あなたの変更は今では GitHub 上のフォークにあります - フォーク (`https://github.com/<whoeveryouare>/qmk_firmware`)に戻ると、"New Pull Request" ボタンをクリックすることで新しいプルリクエストを作成することができます:
 
 ![New Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
 

docs/ja/newbs_building_firmware_configurator.md

@@ -28,7 +28,7 @@ QMK Configurator は Chrome/Firefox で最適に動作します。
 
 キーボードが QMK を搭載していると宣伝されていてもリストにない場合は、開発者がまだ作業中か、私たちがまだマージするきっかけがなかった可能性があります。
 アクティブな [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) がない場合、[qmk_firmware](https://github.com/qmk/qmk_firmware/issues)で報告して、その特定のキーボードのサポートをリクエストします。
-製作者自身の github アカウントにある QMK 搭載キーボードもあります。
+製作者自身の GitHub アカウントにある QMK 搭載キーボードもあります。
 それも再確認してください。
 
 ## キーボードのレイアウトを選択する

docs/ja/newbs_learn_more_resources.md

@@ -14,7 +14,7 @@
 
 * [Great General Tutorial](https://www.codecademy.com/learn/learn-git)
 * [Git Game To Learn From Examples](https://learngitbranching.js.org/)
-* [Git Resources to Learn More About Github](getting_started_github.md)
+* [Git Resources to Learn More About GitHub](getting_started_github.md)
 * [Git Resources Aimed Specifically toward QMK](contributing.md)
 
 ### 日本語
@@ -22,7 +22,7 @@
 _日本語のリソース情報を募集中です。_
 
 * [Git Game To Learn From Examples(日本語対応有り)](https://learngitbranching.js.org/)
-* [QMK で Github を使う方法](ja/getting_started_github.md)
+* [QMK で GitHub を使う方法](ja/getting_started_github.md)
 * [貢献方法](ja/contributing.md)
 
 ## コマンドラインに関するリソース:

docs/newbs_getting_started.md

@@ -135,7 +135,7 @@ Most people new to QMK only have 1 keyboard. You can set this keyboard as your d
 
     qmk config user.keyboard=clueboard/66/rev4
 
-You can also set your default keymap name. Most people use their github username here, and we recommend that you do too.
+You can also set your default keymap name. Most people use their GitHub username here, and we recommend that you do too.
 
     qmk config user.keymap=<github_username>
 

docs/other_vscode.md

@@ -102,7 +102,7 @@ There are a number of extensions that you may want to install:
 This installs a bunch of Git related tools that may make using Git with QMK Firmware easier.
 * [EditorConfig for VS Code](https://marketplace.visualstudio.com/items?itemName=EditorConfig.EditorConfig) - _[Optional]_ -  Helps to keep the code to the QMK Coding Conventions.
 * [Bracket Pair Colorizer 2](https://marketplace.visualstudio.com/items?itemName=CoenraadS.bracket-pair-colorizer-2) - _[Optional]_ - This color codes the brackets in your code, to make it easier to reference nested code.
-* [Github Markdown Preview](https://marketplace.visualstudio.com/items?itemName=bierner.github-markdown-preview) - _[Optional]_ - Makes the markdown preview in VS Code more like GitHub's.
+* [GitHub Markdown Preview](https://marketplace.visualstudio.com/items?itemName=bierner.github-markdown-preview) - _[Optional]_ - Makes the markdown preview in VS Code more like GitHub's.
 * [VS Live Share Extension Pack](https://marketplace.visualstudio.com/items?itemName=MS-vsliveshare.vsliveshare-pack) - _[Optional]_ - This extension allows somebody else to access your workspace (or you to access somebody else's workspace) and help out.  This is great if you're having issues and need some help from somebody.
 * [VIM Keymap](https://marketplace.visualstudio.com/items?itemName=GiuseppeCesarano.vim-keymap) - _[Optional]_ - For those that prefer VIM style keybindings. There are other options for this, too. 
 * [Travis CI Status](https://marketplace.visualstudio.com/items?itemName=felixrieseberg.vsc-travis-ci-status) - _[Optional]_ - This shows the current Travis CI status, if you have it set up.

docs/pt-br/README.md

@@ -12,7 +12,7 @@ QMK (*Quantum Mechanical Keyboard*) é uma comunidade de código aberto que mant
 
 ## Como obter e usar o QMK
 
-Se você planeja contribuir com um _keymap_ ("mapa de teclas"), teclado ou recursos para o QMK, o jeito mais fácil é [percorrer o repositório através do Github](https://github.com/qmk/qmk_firmware#fork-destination-box) e clonar seu repositório localmente para fazer suas alterações, dê um _push_ nelas e abra uma [_Pull request_](https://github.com/qmk/qmk_firmware/pulls) no seu fork.
+Se você planeja contribuir com um _keymap_ ("mapa de teclas"), teclado ou recursos para o QMK, o jeito mais fácil é [percorrer o repositório através do GitHub](https://github.com/qmk/qmk_firmware#fork-destination-box) e clonar seu repositório localmente para fazer suas alterações, dê um _push_ nelas e abra uma [_Pull request_](https://github.com/qmk/qmk_firmware/pulls) no seu fork.
 
 Caso contrário, você pode cloná-lo diretamente com `git clone https://github.com/qmk/qmk_firmware`. Não faça o download dos arquivos zip ou tar; é necessário um repositório git para baixar os submódulos para compilar.
 

docs/pt-br/_summary.md

@@ -11,7 +11,7 @@
   * [QMK CLI](pt-br/cli.md)
   * [QMK CLI Config](pt-br/cli_configuration.md)
   * [Contributing to QMK](pt-br/contributing.md)
-  * [How to Use Github](pt-br/getting_started_github.md)
+  * [How to Use GitHub](pt-br/getting_started_github.md)
   * [Getting Help](pt-br/getting_started_getting_help.md)
 
 * [Breaking Changes](pt-br/breaking_changes.md)

docs/ru-ru/_summary.md

@@ -11,7 +11,7 @@
   * [QMK CLI](ru-ru/cli.md)
   * [QMK CLI Config](ru-ru/cli_configuration.md)
   * [Contributing to QMK](ru-ru/contributing.md)
-  * [How to Use Github](ru-ru/getting_started_github.md)
+  * [How to Use GitHub](ru-ru/getting_started_github.md)
   * [Getting Help](ru-ru/getting_started_getting_help.md)
 
 * [Breaking Changes](ru-ru/breaking_changes.md)

docs/ru-ru/getting_started_github.md

@@ -6,10 +6,10 @@ GitHub может показаться несколько сложным для
 
 Откройте [страницу QMK на GitHub] (https://github.com/qmk/qmk_firmware), и в правом верхнем углу вы увидите кнопку с надписью "Fork":
 
-![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
+![Fork on GitHub](http://i.imgur.com/8Toomz4.jpg)
 
 Если вы состоите в какой-либо организации, вам нужно выбрать учетную запись, к которой будет привязан форк. В большинстве случаев это будет личной аккаунт. Как только ваш форк будет завершен (иногда это занимает немного времени), нажмите кнопку "Clone or Download":
-![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
+![Download from GitHub](http://i.imgur.com/N1NYcSz.jpg)
 
 И обязательно выберите "HTTPS", затем выделите ссылку и скопируйте ее:
 

docs/support.md

@@ -12,6 +12,6 @@ If you need help with something, the best place to get quick support is going to
 
 The official QMK forum is [/r/olkb](https://reddit.com/r/olkb) on [reddit.com](https://reddit.com).
 
-## Github Issues
+## GitHub Issues
 
 You can open an [issue on GitHub](https://github.com/qmk/qmk_firmware/issues). This is especially handy when your issue will require long-term discussion or debugging.

docs/zh-cn/README.md

@@ -13,7 +13,7 @@ QMK (*Quantum Mechanical Keyboard*) 是一个社区维护的开源软件，包
 
 ## 如何得到它
 
-如果你打算贡献布局, 键盘, 或者其他QMK特性, 一下是最简单的方法：[从Github获得repo分支](https://github.com/qmk/qmk_firmware#fork-destination-box), 并克隆你的repo到本地进行编辑，推送，然后从你的分支打开 [Pull Request](https://github.com/qmk/qmk_firmware/pulls).
+如果你打算贡献布局, 键盘, 或者其他QMK特性, 一下是最简单的方法：[从GitHub获得repo分支](https://github.com/qmk/qmk_firmware#fork-destination-box), 并克隆你的repo到本地进行编辑，推送，然后从你的分支打开 [Pull Request](https://github.com/qmk/qmk_firmware/pulls).
 
 此外, 你也可以直接下载 ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), 或者从git克隆 (`git@github.com:qmk/qmk_firmware.git`), 或 https (`https://github.com/qmk/qmk_firmware.git`).
 

docs/zh-cn/_summary.md

@@ -14,7 +14,7 @@
   * [QMK命令行工具](zh-cn/cli.md)
   * [QMK命令行工具配置](zh-cn/cli_configuration.md)
   * [向QMK贡献代码](zh-cn/contributing.md)
-  * [如何使用Github](zh-cn/getting_started_github.md)
+  * [如何使用GitHub](zh-cn/getting_started_github.md)
   * [获得帮助](zh-cn/getting_started_getting_help.md)
 
 * [非兼容性修改](zh-cn/breaking_changes.md)

docs/zh-cn/getting_started_getting_help.md

@@ -10,6 +10,6 @@
 
 QMK的官方论坛是[/r/olkb](https://reddit.com/r/olkb) 在[reddit.com](https://reddit.com)上.
 
-## Github的Issue
+## GitHub的Issue
 
 你可以在GitHub上 [提出issue](https://github.com/qmk/qmk_firmware/issues).当您的问题需要长期讨论或调试时，这尤其方便。

docs/zh-cn/getting_started_github.md

@@ -1,16 +1,16 @@
-# 如何在QMK中使用Github
+# 如何在QMK中使用GitHub
 
-Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
+GitHub can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
 
 ?> 本教程假设您已安装GitHub，并且您喜欢使用命令行工作。
 
-首先 [Github上的QMK页面](https://github.com/qmk/qmk_firmware), 您能看到右上方有个按钮写着"Fork":
+首先 [GitHub上的QMK页面](https://github.com/qmk/qmk_firmware), 您能看到右上方有个按钮写着"Fork":
 
-![从Github上分叉](http://i.imgur.com/8Toomz4.jpg)
+![从GitHub上分叉](http://i.imgur.com/8Toomz4.jpg)
 
 如果你是某组织成员，你将需要选择分叉到哪个账户。一般情况下, 你是想要分叉到你的私人账户下。当你完成分叉 (有时需要等一会), 点击"Clone or Download" 按钮:
 
-!从Github下载](http://i.imgur.com/N1NYcSz.jpg)
+!从GitHub下载](http://i.imgur.com/N1NYcSz.jpg)
 
 你要选择 "HTTPS", 然后选择链接复制:
 
@@ -54,7 +54,7 @@ To https://github.com/whoeveryouare/qmk_firmware.git
  + 20043e64...7da94ac5 master -> master
 ```
 
-现在你的改动已经在你Github上的分支中了 - 如果你回到这 (`https://github.com/你的GitHub账户名/qmk_firmware`) ,你可以点击下方所示按钮创建 "New Pull Request":
+现在你的改动已经在你GitHub上的分支中了 - 如果你回到这 (`https://github.com/你的GitHub账户名/qmk_firmware`) ,你可以点击下方所示按钮创建 "New Pull Request":
 
 ![新的 Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
 

docs/zh-cn/newbs_building_firmware.md

@@ -20,7 +20,7 @@
 
 ## 创建`default` 布局副本
 
-打开`keymaps`文件夹后，您将需要创建`default`文件夹的副本。我们强烈建议您将文件夹命名为与Github用户名相同的名称，但您也可以使用任何您想使用的名称，只要它只包含小写字母、数字和下划线字符。
+打开`keymaps`文件夹后，您将需要创建`default`文件夹的副本。我们强烈建议您将文件夹命名为与GitHub用户名相同的名称，但您也可以使用任何您想使用的名称，只要它只包含小写字母、数字和下划线字符。
 
 要自动执行此过程，您还可以选择运行`new_keymap.sh`脚本。
 

drivers/avr/apa102.c

@@ -2,7 +2,7 @@
  * APA102 lib V1.0a
  *
  * Controls APA102 RGB-LEDs
- * Author: Mikkel (Duckle29 on github)
+ * Author: Mikkel (Duckle29 on GitHub)
  *
  * Dec 22th, 2017  v1.0a Initial Version
  *

drivers/avr/i2c_master.c

@@ -14,7 +14,7 @@
  *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
  */
 /* Library made by: g4lvanix
- * Github repository: https://github.com/g4lvanix/I2C-master-lib
+ * GitHub repository: https://github.com/g4lvanix/I2C-master-lib
  */
 
 #include <avr/io.h>

drivers/avr/i2c_master.h

@@ -14,7 +14,7 @@
  *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
  */
 /* Library made by: g4lvanix
- * Github repository: https://github.com/g4lvanix/I2C-master-lib
+ * GitHub repository: https://github.com/g4lvanix/I2C-master-lib
  */
 
 #ifndef I2C_MASTER_H

drivers/avr/i2c_slave.c

@@ -14,7 +14,7 @@
  *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
  */
 /* Library made by: g4lvanix
- * Github repository: https://github.com/g4lvanix/I2C-slave-lib
+ * GitHub repository: https://github.com/g4lvanix/I2C-slave-lib
  */
 
 #include <avr/io.h>

drivers/avr/i2c_slave.h

@@ -14,7 +14,7 @@
  *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
  */
 /* Library made by: g4lvanix
- * Github repository: https://github.com/g4lvanix/I2C-slave-lib
+ * GitHub repository: https://github.com/g4lvanix/I2C-slave-lib
 
  Info: Inititate the library by giving the required address.
        Read or write to the necessary buffer according to the opperation.

drivers/eeprom/eeprom_i2c.c

@@ -37,8 +37,9 @@
 
 // #define DEBUG_EEPROM_OUTPUT
 
-#ifdef DEBUG_EEPROM_OUTPUT
-#    include "print.h"
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
+#    include "timer.h"
+#    include "debug.h"
 #endif  // DEBUG_EEPROM_OUTPUT
 
 static inline void init_i2c_if_required(void) {
@@ -60,7 +61,7 @@ static inline void fill_target_address(uint8_t *buffer, const void *addr) {
 void eeprom_driver_init(void) {}
 
 void eeprom_driver_erase(void) {
-#ifdef CONSOLE_ENABLE
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     uint32_t start = timer_read32();
 #endif
 
@@ -70,7 +71,7 @@ void eeprom_driver_erase(void) {
         eeprom_write_block(buf, (void *)(uintptr_t)addr, EXTERNAL_EEPROM_PAGE_SIZE);
     }
 
-#ifdef CONSOLE_ENABLE
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     dprintf("EEPROM erase took %ldms to complete\n", ((long)(timer_read32() - start)));
 #endif
 }
@@ -83,7 +84,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
     i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100);
     i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), buf, len, 100);
 
-#ifdef DEBUG_EEPROM_OUTPUT
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     dprintf("[EEPROM R] 0x%04X: ", ((int)addr));
     for (size_t i = 0; i < len; ++i) {
         dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
@@ -110,7 +111,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
             complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + i] = read_buf[i];
         }
 
-#ifdef DEBUG_EEPROM_OUTPUT
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
         dprintf("[EEPROM W] 0x%04X: ", ((int)target_addr));
         for (uint8_t i = 0; i < write_length; i++) {
             dprintf(" %02X", (int)(read_buf[i]));

drivers/eeprom/eeprom_spi.c

@@ -50,8 +50,9 @@
 #    define EXTERNAL_EEPROM_SPI_TIMEOUT 100
 #endif
 
-#ifdef CONSOLE_ENABLE
-#    include "print.h"
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
+#    include "timer.h"
+#    include "debug.h"
 #endif  // CONSOLE_ENABLE
 
 static void init_spi_if_required(void) {
@@ -93,7 +94,7 @@ static void spi_eeprom_transmit_address(uintptr_t addr) {
 void eeprom_driver_init(void) {}
 
 void eeprom_driver_erase(void) {
-#ifdef CONSOLE_ENABLE
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     uint32_t start = timer_read32();
 #endif
 
@@ -103,7 +104,7 @@ void eeprom_driver_erase(void) {
         eeprom_write_block(buf, (void *)(uintptr_t)addr, EXTERNAL_EEPROM_PAGE_SIZE);
     }
 
-#ifdef CONSOLE_ENABLE
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     dprintf("EEPROM erase took %ldms to complete\n", ((long)(timer_read32() - start)));
 #endif
 }
@@ -141,7 +142,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
     spi_eeprom_transmit_address((uintptr_t)addr);
     spi_receive(buf, len);
 
-#ifdef DEBUG_EEPROM_OUTPUT
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     dprintf("[EEPROM R] 0x%08lX: ", ((uint32_t)(uintptr_t)addr));
     for (size_t i = 0; i < len; ++i) {
         dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
@@ -200,7 +201,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
             return;
         }
 
-#ifdef DEBUG_EEPROM_OUTPUT
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
         dprintf("[EEPROM W] 0x%08lX: ", ((uint32_t)(uintptr_t)target_addr));
         for (size_t i = 0; i < write_length; i++) {
             dprintf(" %02X", (int)(uint8_t)(read_buf[i]));

keyboards/8pack/readme.md

@@ -4,7 +4,7 @@ An open source 2x4 macropad designed by Charles Garcia.
 
 Keyboard Maintainer: [Charles Garcia](https://github.com/cgarcia2097)  
 Hardware Supported: 8-Pack Macropad PCB  
-Hardware Availability: [8-Pack Github](https://github.com/cgarcia2097/8-Pack)  
+Hardware Availability: [8-Pack GitHub](https://github.com/cgarcia2097/8-Pack)  
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/abacus/readme.md

@@ -6,7 +6,7 @@ A first attempt at a PCB design for a mechanical keyboard. Includes rotary encod
 
 * Keyboard Maintainer: [nickolaij](https://github.com/nickolaij)
 * Hardware Supported: Abacus PCB, [Elite C Microcontroller](https://keeb.io/products/elite-c-usb-c-pro-micro-replacement-arduino-compatible-atmega32u4) or Pro Micro Microcontroller (Elite C has additional pins for encoder)
-* Hardware Availability: [Abacus PCB Github](https://github.com/nickolaij/Abacus_Rev2)
+* Hardware Availability: [Abacus PCB GitHub](https://github.com/nickolaij/Abacus_Rev2)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/allison/readme.md

@@ -4,7 +4,7 @@
 
 A custom luxurious 60 with F-row and Macro
 
-* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
+* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)
 * Hardware Supported: ATmega32U4
 * Hardware Availability: Small production run by mrpetrov#9585 and [protoTypist](https://discord.gg/UvskpBB)
 

keyboards/allison_numpad/readme.md

@@ -4,7 +4,7 @@
 
 A custom luxurious numpad to match Allison
 
-* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
+* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)
 * Hardware Supported: ATmega32U4
 * Hardware Availability: Small production run by mrpetrov#9585 and [protoTypist](https://discord.gg/UvskpBB)
 

keyboards/alps64/readme.md

@@ -6,7 +6,7 @@ Keyboard Maintainer: QMK Community
 Hardware Supported: Alps64 PCB  
 Hardware Availability: https://geekhack.org/index.php?topic=69666.0
 
-QMK is not the Alps64 official firmware. To use the official tools, refer to  [TMK Keymap Editor](http://www.tmk-kbd.com/tmk_keyboard/editor/unimap/?alps64) or [TMK Keyboard Firmware on Github](https://github.com/tmk/tmk_keyboard).
+QMK is not the Alps64 official firmware. To use the official tools, refer to  [TMK Keymap Editor](http://www.tmk-kbd.com/tmk_keyboard/editor/unimap/?alps64) or [TMK Keyboard Firmware on GitHub](https://github.com/tmk/tmk_keyboard).
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/atreus/astar_mirrored/config.h

@@ -28,7 +28,7 @@
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
-#define PDBDOWN 1
+#define PCBDOWN 1
 
 #define MATRIX_ROW_PINS { D0, D1, D3, D2 }
 #define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }

keyboards/baguette/readme.md

@@ -5,7 +5,7 @@ Baguette
 
 This is a custom keyboard with backlight inspired by France.
 
-Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)  
 Hardware Supported: ATMEGA 32u4 MCU with backlight support.  
 Hardware Availability: Closed group-buy please contact the runners (Tesletron and Enjoy)
 

keyboards/converter/siemens_tastatur/readme.md

@@ -4,7 +4,7 @@
 
 A Blue Pill STM32F103C8T6-based Converter board for a very very old keyboard.  
 
-Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)  
 Hardware Supported: Blue Pill STM32F103C8T6  
 Hardware Availability: Custom PCB available, contact me  
 

keyboards/ergodox_ez/keymaps/nathanvercaemert/config.h

@@ -0,0 +1,29 @@
+/*
+  Set any config.h overrides for your specific keymap here.
+  See config.h options at https://docs.qmk.fm/#/config_options?id=the-configh-file
+*/
+#define ORYX_CONFIGURATOR
+#undef TAPPING_TERM
+#define TAPPING_TERM 175
+
+#undef MOUSEKEY_DELAY
+#define MOUSEKEY_DELAY 20
+
+#undef MOUSEKEY_MAX_SPEED
+#define MOUSEKEY_MAX_SPEED 14
+
+#undef MOUSEKEY_TIME_TO_MAX
+#define MOUSEKEY_TIME_TO_MAX 30
+
+#undef MOUSEKEY_WHEEL_INTERVAL
+#define MOUSEKEY_WHEEL_INTERVAL 50
+
+// /* Temporarily defining a tapping term that is ridiculous to see if i can tell if lt is working. */
+// #undef TAPPING_TERM
+// #define TAPPING_TERM 499
+
+/* Turning permissive hold and ignore mod tap interrupt off in order to test the tapping term. */
+#undef PERMISSIVE_HOLD
+#define PERMISSIVE_HOLD
+#undef IGNORE_MOD_TAP_INTERRUPT
+#define IGNORE_MOD_TAP_INTERRUPT

keyboards/ergodox_ez/keymaps/nathanvercaemert/keymap.c

@@ -0,0 +1,351 @@
+#include QMK_KEYBOARD_H
+#include "version.h"
+#include "keymap_german.h"
+#include "keymap_nordic.h"
+#include "keymap_french.h"
+#include "keymap_spanish.h"
+#include "keymap_hungarian.h"
+#include "keymap_swedish.h"
+#include "keymap_br_abnt2.h"
+#include "keymap_canadian_multilingual.h"
+#include "keymap_german_ch.h"
+#include "keymap_jp.h"
+#include "keymap_bepo.h"
+
+#define KC_MAC_UNDO LGUI(KC_Z)
+#define KC_MAC_CUT LGUI(KC_X)
+#define KC_MAC_COPY LGUI(KC_C)
+#define KC_MAC_PASTE LGUI(KC_V)
+#define KC_PC_UNDO LCTL(KC_Z)
+#define KC_PC_CUT LCTL(KC_X)
+#define KC_PC_COPY LCTL(KC_C)
+#define KC_PC_PASTE LCTL(KC_V)
+#define ES_LESS_MAC KC_GRAVE
+#define ES_GRTR_MAC LSFT(KC_GRAVE)
+#define ES_BSLS_MAC ALGR(KC_6)
+#define NO_PIPE_ALT KC_GRAVE
+#define NO_BSLS_ALT KC_EQUAL
+
+enum custom_keycodes {
+  RGB_SLD = EZ_SAFE_RANGE,
+};
+
+// tapdance keycodes
+enum td_keycodes {
+  CTRL_TO12,
+  SHIFT_TO13,
+  ALT_TO11
+};
+
+// define a type containing as many tapdance states as you need
+typedef enum {
+  SINGLE_TAP,
+  SINGLE_HOLD,
+} td_state_t;
+
+// create a global instance of the tapdance state type
+static td_state_t td_state;
+
+// declare your tapdance functions:
+
+// function to determine the current tapdance state
+int cur_dance (qk_tap_dance_state_t *state);
+
+// `finished` and `reset` functions for each tapdance keycode
+void ctrlto12_finished (qk_tap_dance_state_t *state, void *user_data);
+void ctrlto12_reset (qk_tap_dance_state_t *state, void *user_data);
+void altto11_finished (qk_tap_dance_state_t *state, void *user_data);
+void altto11_reset (qk_tap_dance_state_t *state, void *user_data);
+void shiftto13_finished (qk_tap_dance_state_t *state, void *user_data);
+void shiftto13_reset (qk_tap_dance_state_t *state, void *user_data);
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ergodox_pretty(
+    KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,                                          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,
+    KC_INSERT,      KC_Q,           LGUI_T(KC_W),   MT(MOD_HYPR, KC_E),LT(5,KC_R),  KC_T,           KC_NO,                                          KC_NO,          KC_Y,           LT(6,KC_U),     MT(MOD_HYPR, KC_I),RGUI_T(KC_O), KC_P,          KC_PSCREEN,
+    KC_ESCAPE,      LSFT_T(KC_A),   LCTL_T(KC_S),   LALT_T(KC_D),   LT(1,KC_F),     KC_G,                                                                           KC_H,           LT(2,KC_J),     RALT_T(KC_K),   RCTL_T(KC_L),   RSFT_T(KC_SCOLON),KC_CAPSLOCK,
+    KC_HOME,        LT(9,KC_Z),     MT(MOD_LGUI | MOD_LCTL,KC_X), LT(7,KC_C), LT(3,KC_V), KC_B,     KC_NO,                                          KC_NO,          KC_N,           LT(4,KC_M),     LT(8,KC_COMMA), MT(MOD_RGUI | MOD_RCTL, KC_DOT), KC_QUOTE, KC_END,
+    KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_DELETE,                                                                                                      KC_TAB,         KC_NO,          KC_NO,          KC_NO,          KC_NO,
+                                                                                                    KC_NO,          KC_NO,          KC_NO,          KC_NO,
+                                                                                                                    KC_NO,          KC_NO,
+                                                                                    TO(10),         KC_BSPACE,      KC_NO,          KC_NO,          KC_ENTER,       KC_SPACE
+  ),
+  [1] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_LGUI,        KC_HYPR,        KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_7,           KC_8,           KC_9,           KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_LSHIFT,      KC_LCTRL,       KC_LALT,        KC_TRANSPARENT, KC_NO,                                                                          KC_NO,          KC_4,           KC_5,           KC_6,           KC_0,           KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          MT(MOD_LGUI | MOD_LCTL,KC_NO),  KC_NO, KC_NO,   KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_1,           KC_2,           KC_3,           KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT
+  ),
+  [2] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_HYPR,        KC_RGUI,        KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_LPRN,        KC_RPRN,        KC_ASTR,        KC_SLASH,       KC_NO,                                                                          KC_NO,          KC_TRANSPARENT, KC_RALT,        KC_RCTRL,       KC_RSHIFT,      KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          MT(MOD_RGUI | MOD_RCTL, KC_NO), KC_NO, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT
+  ),
+  [3] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_LGUI,        KC_HYPR,        KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_F9,          KC_F10,         KC_F11,         KC_F12,         KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_LSHIFT,      KC_LCTRL,       KC_LALT,        KC_NO,          KC_NO,                                                                          KC_NO,          KC_F5,          KC_F6,          KC_F7,          KC_F8,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          MT(MOD_LGUI | MOD_LCTL,KC_NO),  KC_NO,          KC_TRANSPARENT, KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_F1,          KC_F2,          KC_F3,          KC_F4,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT
+  ),
+  [4] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_HYPR,        KC_RGUI,        KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_LBRACKET,    KC_RBRACKET,    KC_QUES,        KC_EXLM,        KC_NO,                                                                          KC_NO,          KC_NO,          KC_RALT,        KC_RCTRL,       KC_RSHIFT,      KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_TRANSPARENT, KC_NO,          MT(MOD_RGUI | MOD_RCTL, KC_NO), KC_NO, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT
+  ),
+  [5] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_LGUI,        KC_HYPR,        KC_TRANSPARENT, KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_LSHIFT,      KC_LCTRL,       KC_LALT,        KC_NO,          KC_NO,                                                                          KC_NO,          KC_HASH,        KC_BSLASH,      KC_GRAVE,       KC_TILD,        KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          MT(MOD_LGUI | MOD_LCTL,KC_NO),  KC_NO, KC_NO,   KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT
+  ),
+  [6] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_TRANSPARENT, KC_HYPR,        KC_RGUI,        KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_UNDS,        KC_EQUAL,       KC_MINUS,       KC_PLUS,        KC_NO,                                                                          KC_NO,          KC_NO,          KC_RALT,        KC_RCTRL,       KC_RSHIFT,      KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          MT(MOD_RGUI | MOD_RCTL, KC_NO), KC_NO, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT
+  ),
+  [7] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,                                                                          KC_NO,          KC_AT,          KC_DLR,         KC_PERC,        KC_CIRC,        KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_TRANSPARENT, KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT
+  ),
+  [8] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_LCBR,        KC_RCBR,        KC_AMPR,        KC_PIPE,        KC_NO,                                                                          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_TRANSPARENT, KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT
+  ),
+  [9] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_AUDIO_VOL_UP,KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,                                                                          KC_NO,          KC_MEDIA_PREV_TRACK,KC_AUDIO_VOL_DOWN,KC_MEDIA_NEXT_TRACK,KC_MEDIA_PLAY_PAUSE,KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT
+  ),
+  [10] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_LGUI,        KC_MS_BTN2,     KC_NO,          KC_NO,          KC_TRANSPARENT,                                 MT(MOD_RCTL, KC_A), KC_NO,      KC_NO,          KC_MS_UP,       KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, TD(SHIFT_TO13), TD(CTRL_TO12),  TD(ALT_TO11),   KC_MS_BTN1,     KC_NO,                                                                          KC_NO,          KC_MS_LEFT,     KC_MS_DOWN,     KC_MS_RIGHT,    KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          MT(MOD_LGUI | MOD_LCTL,KC_NO),  KC_NO, KC_NO,   KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, TO(0)
+  ),
+  [11] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_LGUI,        KC_HYPR,        KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_UP,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_LSHIFT,      KC_LCTRL,       KC_LALT,        KC_NO,          KC_NO,                                                                          KC_NO,          KC_LEFT,        KC_DOWN,        KC_RIGHT,       KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          MT(MOD_LGUI | MOD_LCTL,KC_NO),  KC_NO, KC_NO,   KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, TO(0)
+  ),
+  [12] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_LGUI,        KC_HYPR,        KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_MS_WH_UP,    KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_LSHIFT,      KC_LCTRL,       KC_LALT,        KC_NO,          KC_NO,                                                                          KC_NO,          KC_MS_WH_LEFT,  KC_MS_WH_DOWN,  KC_MS_WH_RIGHT, KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          MT(MOD_LGUI | MOD_LCTL,KC_NO),  KC_NO, KC_NO,   KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, TO(0)
+  ),
+  [13] = LAYOUT_ergodox_pretty(
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          KC_LGUI,        KC_HYPR,        KC_NO,          KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_PGUP,        KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_LSHIFT,      KC_LCTRL,       KC_LALT,        KC_NO,          KC_NO,                                                                          KC_NO,          KC_NO,          KC_PGDOWN,      KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_NO,          MT(MOD_LGUI | MOD_LCTL,KC_NO),  KC_NO, KC_NO,   KC_NO,          KC_TRANSPARENT,                                 KC_TRANSPARENT, KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_NO,          KC_TRANSPARENT,
+    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,                                                                                                 KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                                                    KC_TRANSPARENT, KC_TRANSPARENT,
+                                                                                    KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, KC_TRANSPARENT, TO(0)
+  ),
+};
+
+
+/* Commenting out for debug purposes */
+// bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+//   switch (keycode) {
+//   }
+//   return true;
+// }
+
+uint32_t layer_state_set_user(uint32_t state) {
+  uint8_t layer = biton32(state);
+  ergodox_board_led_off();
+  ergodox_right_led_1_off();
+  ergodox_right_led_2_off();
+  ergodox_right_led_3_off();
+  switch (layer) {
+    case 1:
+      ergodox_right_led_1_on();
+      break;
+    case 2:
+      ergodox_right_led_2_on();
+      break;
+    case 3:
+      ergodox_right_led_3_on();
+      break;
+    case 4:
+      ergodox_right_led_1_on();
+      ergodox_right_led_2_on();
+      break;
+    case 5:
+      ergodox_right_led_1_on();
+      ergodox_right_led_3_on();
+      break;
+    case 6:
+      ergodox_right_led_2_on();
+      ergodox_right_led_3_on();
+      break;
+    case 7:
+      ergodox_right_led_1_on();
+      ergodox_right_led_2_on();
+      ergodox_right_led_3_on();
+      break;
+    default:
+      break;
+  }
+  return state;
+};
+
+// determine the tapdance state to return
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    if (state->interrupted || !state->pressed) { return SINGLE_TAP; }
+    else { return SINGLE_HOLD; }
+  }
+  else { return 2; } // any number higher than the maximum state value you return above
+}
+
+void ctrlto12_finished (qk_tap_dance_state_t *state, void *user_data) {
+  td_state = cur_dance(state);
+  switch (td_state) {
+    case SINGLE_TAP:
+      layer_on(12);
+      break;
+    case SINGLE_HOLD:
+      register_mods(MOD_BIT(KC_LCTRL)); // for a layer-tap key, use `layer_on(_MY_LAYER)` here
+      break;
+  }
+}
+
+void ctrlto12_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (td_state) {
+    case SINGLE_TAP:
+      break;
+    case SINGLE_HOLD:
+      unregister_mods(MOD_BIT(KC_LCTRL)); // for a layer-tap key, use `layer_off(_MY_LAYER)` here
+      break;
+  }
+}
+
+void shiftto13_finished (qk_tap_dance_state_t *state, void *user_data) {
+  td_state = cur_dance(state);
+  switch (td_state) {
+    case SINGLE_TAP:
+      layer_on(13);
+      break;
+    case SINGLE_HOLD:
+      register_mods(MOD_BIT(KC_LSHIFT)); // for a layer-tap key, use `layer_on(_MY_LAYER)` here
+      break;
+  }
+}
+
+void shiftto13_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (td_state) {
+    case SINGLE_TAP:
+      break;
+    case SINGLE_HOLD:
+      unregister_mods(MOD_BIT(KC_LSHIFT)); // for a layer-tap key, use `layer_off(_MY_LAYER)` here
+      break;
+  }
+}
+
+void altto11_finished (qk_tap_dance_state_t *state, void *user_data) {
+  td_state = cur_dance(state);
+  switch (td_state) {
+    case SINGLE_TAP:
+      layer_on(11);
+      break;
+    case SINGLE_HOLD:
+      register_mods(MOD_BIT(KC_LALT)); // for a layer-tap key, use `layer_on(_MY_LAYER)` here
+      break;
+  }
+}
+
+void altto11_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (td_state) {
+    case SINGLE_TAP:
+      break;
+    case SINGLE_HOLD:
+      unregister_mods(MOD_BIT(KC_LALT)); // for a layer-tap key, use `layer_off(_MY_LAYER)` here
+      break;
+  }
+}
+
+// define `ACTION_TAP_DANCE_FN_ADVANCED()` for each tapdance keycode, passing in `finished` and `reset` functions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [CTRL_TO12] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ctrlto12_finished, ctrlto12_reset),
+  [SHIFT_TO13] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, shiftto13_finished, shiftto13_reset),
+  [ALT_TO11] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, altto11_finished, altto11_reset)
+};
+
+/* Debugging functions */
+
+void keyboard_post_init_user(void) {
+  // Customise these values to desired behaviour
+//   debug_enable=true;
+//   debug_matrix=true;
+//   debug_keyboard=true;
+//   debug_mouse=true;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // If console is enabled, it will print the matrix position and status of each key pressed
+// #ifdef CONSOLE_ENABLE
+//     uprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+// #endif
+  return true;
+}
+

keyboards/ergodox_ez/keymaps/nathanvercaemert/readme.md

@@ -0,0 +1,26 @@
+# The nathanvercaemert ErgoDox EZ configuration
+
+Centered around the home row and the use of mouse keys, this configuration focuses
+on minimal finger movement. No key is more than one unit away from a finger on the home row.
+
+## Layers
+
+* Base Layer
+  * The two main thumb keys provide a loop to the mouse key layer. Pressing the left followed by the right always guarantees that you are on the base layer.
+  * There are a lot of dual function keys on the base layer.
+  * The layout of the letters is qwerty.
+  * Pinkys, ring fingers, and middle fingers apply dual function modifiers (along with the keys above and below the ring fingers.)
+* Numbers, Symbols, and Function Keys.
+  * From the base layer, many keys are dual function layer switches.
+  * The switch on one hand changes the home row of the other hand to a row of symbols in most cases.
+  * The left index finger, and the key below it, change the right hand to the numbers and function keys
+  respectfully.
+* Mouse Layer
+  * Clicking the main left thumb key navigates to the mouse layer (10.) Some dual function keys (technically tap dance functions) allow the left hand to apply modifiers to mouse clicks while tapping switches to
+  navigation layers.
+* Navigation Layers
+  * From the Mouse Layer, taps to the left home row navigate to scroll keys, arrow keys, and page keys.
+
+Here is the image of my keymap:
+
+![Default](https://i.imgur.com/kXywQIq.png)

keyboards/ergodox_ez/keymaps/nathanvercaemert/rules.mk

@@ -0,0 +1,10 @@
+# Set any rules.mk overrides for your specific keymap here.
+# See rules at https://docs.qmk.fm/#/config_options?id=the-rulesmk-file
+LINK_TIME_OPTIMIZATION_ENABLE = yes
+COMMAND_ENABLE = no
+RGBLIGHT_ENABLE = no
+TAP_DANCE_ENABLE=yes
+
+
+#Beginning debugging process for LT() and permissive hold
+CONSOLE_ENABLE = yes

keyboards/foxlab/key65/hotswap/config.h

@@ -0,0 +1,172 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x464C // "FL"
+#define PRODUCT_ID      0x0003
+#define DEVICE_VER      0x0001
+#define MANUFACTURER Fox Lab
+#define PRODUCT Key 65 Hotswap
+#define DESCRIPTION Key 65 Hotswap
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D2, D1, D0, D3, B3 }
+#define MATRIX_COL_PINS { F5, F4, F1, F0, B0, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 8
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/foxlab/key65/hotswap/hotswap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hotswap.h"
+
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(E6);
+    writePinHigh(E6);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(E6, !led_state.caps_lock);
+    }
+    return true;
+}

keyboards/foxlab/key65/hotswap/hotswap.h

@@ -0,0 +1,33 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,      K0E,   \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,    K1E,   \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,        K2E,   \
+    K30,       K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,     K3D, K3E,   \
+    K40,   K41, K42,                  K47,                 K4B,      K4C, K4D, K4E    \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   KC_NO, K2E   }, \
+    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, KC_NO, K47,   KC_NO, KC_NO, KC_NO, K4B,   K4C,   K4D,   K4E   }, \
+}

keyboards/foxlab/key65/hotswap/info.json

@@ -0,0 +1,80 @@
+{
+    "keyboard_name": "Key 65 Hotswap",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 66,
+            "layout": [
+                {"label":"K00 (D2,F5)", "x":0, "y":0},
+                {"label":"K01 (D2,F4)", "x":1, "y":0},
+                {"label":"K02 (D2,F1)", "x":2, "y":0},
+                {"label":"K03 (D2,F0)", "x":3, "y":0},
+                {"label":"K04 (D2,B0)", "x":4, "y":0},
+                {"label":"K05 (D2,F6)", "x":5, "y":0},
+                {"label":"K06 (D2,F7)", "x":6, "y":0},
+                {"label":"K07 (D2,C7)", "x":7, "y":0},
+                {"label":"K08 (D2,C6)", "x":8, "y":0},
+                {"label":"K09 (D2,B6)", "x":9, "y":0},
+                {"label":"K0A (D2,B5)", "x":10, "y":0},
+                {"label":"K0B (D2,B4)", "x":11, "y":0},
+                {"label":"K0C (D2,D7)", "x":12, "y":0},
+                {"label":"K0D (D2,D6)", "x":13, "y":0, "w":2},
+                {"label":"K0E (D2,D4)", "x":15, "y":0},
+                {"label":"K10 (D1,F5)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (D1,F4)", "x":1.5, "y":1},
+                {"label":"K12 (D1,F1)", "x":2.5, "y":1},
+                {"label":"K13 (D1,F0)", "x":3.5, "y":1},
+                {"label":"K14 (D1,B0)", "x":4.5, "y":1},
+                {"label":"K15 (D1,F6)", "x":5.5, "y":1},
+                {"label":"K16 (D1,F7)", "x":6.5, "y":1},
+                {"label":"K17 (D1,C7)", "x":7.5, "y":1},
+                {"label":"K18 (D1,C6)", "x":8.5, "y":1},
+                {"label":"K19 (D1,B6)", "x":9.5, "y":1},
+                {"label":"K1A (D1,B5)", "x":10.5, "y":1},
+                {"label":"K1B (D1,B4)", "x":11.5, "y":1},
+                {"label":"K1C (D1,D7)", "x":12.5, "y":1},
+                {"label":"K1D (D1,D6)", "x":13.5, "y":1, "w":1.5},
+                {"label":"K1E (D1,D4)", "x":15, "y":1},
+                {"label":"K20 (D0,F5)", "x":0, "y":2, "w":1.75},
+                {"label":"K21 (D0,F4)", "x":1.75, "y":2},
+                {"label":"K22 (D0,F1)", "x":2.75, "y":2},
+                {"label":"K23 (D0,F0)", "x":3.75, "y":2},
+                {"label":"K24 (D0,B0)", "x":4.75, "y":2},
+                {"label":"K25 (D0,F6)", "x":5.75, "y":2},
+                {"label":"K26 (D0,F7)", "x":6.75, "y":2},
+                {"label":"K27 (D0,C7)", "x":7.75, "y":2},
+                {"label":"K28 (D0,C6)", "x":8.75, "y":2},
+                {"label":"K29 (D0,B6)", "x":9.75, "y":2},
+                {"label":"K2A (D0,B5)", "x":10.75, "y":2},
+                {"label":"K2B (D0,B4)", "x":11.75, "y":2},
+                {"label":"K2C (D0,D7)", "x":12.75, "y":2, "w":2.25},
+                {"label":"K2E (D0,D4)", "x":15, "y":2},
+                {"label":"K30 (D3,F5)", "x":0, "y":3, "w":2.25},
+                {"label":"K32 (D3,F1)", "x":2.25, "y":3},
+                {"label":"K33 (D3,F0)", "x":3.25, "y":3},
+                {"label":"K34 (D3,B0)", "x":4.25, "y":3},
+                {"label":"K35 (D3,F6)", "x":5.25, "y":3},
+                {"label":"K36 (D3,F7)", "x":6.25, "y":3},
+                {"label":"K37 (D3,C7)", "x":7.25, "y":3},
+                {"label":"K38 (D3,C6)", "x":8.25, "y":3},
+                {"label":"K39 (D3,B6)", "x":9.25, "y":3},
+                {"label":"K3A (D3,B5)", "x":10.25, "y":3},
+                {"label":"K3B (D3,B4)", "x":11.25, "y":3},
+                {"label":"K3C (D3,D7)", "x":12.25, "y":3, "w":1.75},
+                {"label":"K3D (D3,D6)", "x":14, "y":3},
+                {"label":"K3E (D3,D4)", "x":15, "y":3},
+                {"label":"K40 (B3,F5)", "x":0, "y":4, "w":1.5},
+                {"label":"K41 (B3,F4)", "x":1.5, "y":4},
+                {"label":"K42 (B3,F1)", "x":2.5, "y":4, "w":1.5},
+                {"label":"K47 (B3,C7)", "x":4, "y":4, "w":7},
+                {"label":"K4B (B3,B4)", "x":11, "y":4, "w":1.5},
+                {"label":"K4C (B3,D7)", "x":13, "y":4},
+                {"label":"K4D (B3,D6)", "x":14, "y":4},
+                {"label":"K4E (B3,D4)", "x":15, "y":4}
+            ]
+        }
+    }
+}

keyboards/foxlab/key65/hotswap/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_GRV,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,      KC_PGUP,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,              KC_PGDN,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,        KC_UP,   MO(1),
+        KC_LCTL,     KC_LGUI, KC_LALT,                             KC_SPC,                                 KC_RALT,          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,          _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,             _______,
+        _______,            BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, _______, _______, _______, _______, _______, _______, _______,        _______, _______,
+        _______,     _______, _______,                            _______,                                 _______,          _______, _______, _______
+    ),
+
+};
+

keyboards/foxlab/key65/hotswap/keymaps/via/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_GRV,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,      KC_PGUP,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,              KC_PGDN,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,        KC_UP,   MO(1),
+        KC_LCTL,     KC_LGUI, KC_LALT,                             KC_SPC,                                 KC_RALT,          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,          _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,             _______,
+        _______,            BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, _______, _______, _______, _______, _______, _______, _______,        _______, _______,
+        _______,     _______, _______,                            _______,                                 _______,          _______, _______, _______
+    ),
+    [2] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,             _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______,
+        _______,     _______, _______,                            _______,                                 _______,          _______, _______, _______
+    ),
+    [3] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,             _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______,
+        _______,     _______, _______,                            _______,                                 _______,          _______, _______, _______
+    ),
+};

keyboards/foxlab/key65/hotswap/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/foxlab/key65/hotswap/readme.md

@@ -0,0 +1,18 @@
+# Foxlab Key 65 Hotswap
+
+![Key 65](https://i.imgur.com/28Qck8ul.jpg)
+
+Key 65 is featured with the three-layer case and dual-gasket structure. The plate mounting system is an improved version of the gasket sandwich on Leaf 60. In addition, we add gaskets between the middle case and the bottom case. There's an optional rubber sheet between the PCB and the plate. The numerous options will offer you the most freedom to make the keyboard look and feel as you wish.
+
+* Keyboard Maintainer: QMK
+* Hardware Supported: Key 65 Hotswap PCB
+* Hardware Availability: [Group Buy](https://geekhack.org/index.php?topic=102609.0)
+
+This version is for the hotswap variant with the fixed layout below:
+![Layout](https://i.imgur.com/NDqjqJml.png)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make foxlab/key65/hotswap:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/foxlab/key65/hotswap/rules.mk

@@ -0,0 +1,27 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/foxlab/key65/universal/config.h

@@ -0,0 +1,172 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x464C // "FL"
+#define PRODUCT_ID      0x0004
+#define DEVICE_VER      0x0001
+#define MANUFACTURER Fox Lab
+#define PRODUCT Key 65 Universal
+#define DESCRIPTION Key 65 Universal
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D0, D1, F0, F4, F1 }
+#define MATRIX_COL_PINS { B1, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B0 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 6
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/foxlab/key65/universal/info.json

@@ -0,0 +1,306 @@
+{
+    "keyboard_name": "Key 65 Universal",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_65_ansi_blocker_split_bs": {
+            "key_count": 68,
+            "layout": [
+                {"label":"K00 (D0,B1)", "x":0, "y":0},
+                {"label":"K01 (D0,F5)", "x":1, "y":0},
+                {"label":"K02 (D0,F6)", "x":2, "y":0},
+                {"label":"K03 (D0,F7)", "x":3, "y":0},
+                {"label":"K04 (D0,C7)", "x":4, "y":0},
+                {"label":"K05 (D0,C6)", "x":5, "y":0},
+                {"label":"K06 (D0,B6)", "x":6, "y":0},
+                {"label":"K07 (D0,B5)", "x":7, "y":0},
+                {"label":"K08 (D0,B4)", "x":8, "y":0},
+                {"label":"K09 (D0,D7)", "x":9, "y":0},
+                {"label":"K0A (D0,D6)", "x":10, "y":0},
+                {"label":"K0B (D0,D4)", "x":11, "y":0},
+                {"label":"K0C (D0,D5)", "x":12, "y":0},
+                {"label":"K0D (D0,D3)", "x":13, "y":0},
+                {"label":"K0E (D0,D2)", "x":14, "y":0},
+                {"label":"K0F (D0,B0)", "x":15, "y":0},
+                {"label":"K10 (D1,B1)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (D1,F5)", "x":1.5, "y":1},
+                {"label":"K12 (D1,F6)", "x":2.5, "y":1},
+                {"label":"K13 (D1,F7)", "x":3.5, "y":1},
+                {"label":"K14 (D1,C7)", "x":4.5, "y":1},
+                {"label":"K15 (D1,C6)", "x":5.5, "y":1},
+                {"label":"K16 (D1,B6)", "x":6.5, "y":1},
+                {"label":"K17 (D1,B5)", "x":7.5, "y":1},
+                {"label":"K18 (D1,B4)", "x":8.5, "y":1},
+                {"label":"K19 (D1,D7)", "x":9.5, "y":1},
+                {"label":"K1A (D1,D6)", "x":10.5, "y":1},
+                {"label":"K1B (D1,D4)", "x":11.5, "y":1},
+                {"label":"K1C (D1,D5)", "x":12.5, "y":1},
+                {"label":"K1D (D1,D3)", "x":13.5, "y":1, "w":1.5},
+                {"label":"K1F (D1,B0)", "x":15, "y":1},
+                {"label":"K20 (F0,B1)", "x":0, "y":2, "w":1.75},
+                {"label":"K21 (F0,F5)", "x":1.75, "y":2},
+                {"label":"K22 (F0,F6)", "x":2.75, "y":2},
+                {"label":"K23 (F0,F7)", "x":3.75, "y":2},
+                {"label":"K24 (F0,C7)", "x":4.75, "y":2},
+                {"label":"K25 (F0,C6)", "x":5.75, "y":2},
+                {"label":"K26 (F0,B6)", "x":6.75, "y":2},
+                {"label":"K27 (F0,B5)", "x":7.75, "y":2},
+                {"label":"K28 (F0,B4)", "x":8.75, "y":2},
+                {"label":"K29 (F0,D7)", "x":9.75, "y":2},
+                {"label":"K2A (F0,D6)", "x":10.75, "y":2},
+                {"label":"K2B (F0,D4)", "x":11.75, "y":2},
+                {"label":"K2D (F0,D3)", "x":12.75, "y":2, "w":2.25},
+                {"label":"K2F (F0,B0)", "x":15, "y":2},
+                {"label":"K30 (F4,B1)", "x":0, "y":3, "w":2.25},
+                {"label":"K32 (F4,F6)", "x":2.25, "y":3},
+                {"label":"K33 (F4,F7)", "x":3.25, "y":3},
+                {"label":"K34 (F4,C7)", "x":4.25, "y":3},
+                {"label":"K35 (F4,C6)", "x":5.25, "y":3},
+                {"label":"K36 (F4,B6)", "x":6.25, "y":3},
+                {"label":"K37 (F4,B5)", "x":7.25, "y":3},
+                {"label":"K38 (F4,B4)", "x":8.25, "y":3},
+                {"label":"K39 (F4,D7)", "x":9.25, "y":3},
+                {"label":"K3A (F4,D6)", "x":10.25, "y":3},
+                {"label":"K3B (F4,D4)", "x":11.25, "y":3},
+                {"label":"K3C (F4,D5)", "x":12.25, "y":3, "w":1.75},
+                {"label":"K3D (F4,D3)", "x":14, "y":3},
+                {"label":"K3F (F4,B0)", "x":15, "y":3},
+                {"label":"K40 (F1,B1)", "x":0, "y":4, "w":1.25},
+                {"label":"K41 (F1,F5)", "x":1.25, "y":4, "w":1.25},
+                {"label":"K42 (F1,F6)", "x":2.5, "y":4, "w":1.25},
+                {"label":"K46 (F1,B6)", "x":3.75, "y":4, "w":6.25},
+                {"label":"K4A (F1,D6)", "x":10, "y":4, "w":1.25},
+                {"label":"K4B (F1,D4)", "x":11.25, "y":4, "w":1.25},
+                {"label":"K4C (F1,D5)", "x":13, "y":4},
+                {"label":"K4D (F1,D3)", "x":14, "y":4},
+                {"label":"K4F (F1,B0)", "x":15, "y":4}
+            ]
+        },
+        "LAYOUT_65_ansi_blocker_tsangan_split_bs": {
+            "key_count": 67,
+            "layout": [
+                {"label":"K00 (D0,B1)", "x":0, "y":0},
+                {"label":"K01 (D0,F5)", "x":1, "y":0},
+                {"label":"K02 (D0,F6)", "x":2, "y":0},
+                {"label":"K03 (D0,F7)", "x":3, "y":0},
+                {"label":"K04 (D0,C7)", "x":4, "y":0},
+                {"label":"K05 (D0,C6)", "x":5, "y":0},
+                {"label":"K06 (D0,B6)", "x":6, "y":0},
+                {"label":"K07 (D0,B5)", "x":7, "y":0},
+                {"label":"K08 (D0,B4)", "x":8, "y":0},
+                {"label":"K09 (D0,D7)", "x":9, "y":0},
+                {"label":"K0A (D0,D6)", "x":10, "y":0},
+                {"label":"K0B (D0,D4)", "x":11, "y":0},
+                {"label":"K0C (D0,D5)", "x":12, "y":0},
+                {"label":"K0D (D0,D3)", "x":13, "y":0},
+                {"label":"K0E (D0,D2)", "x":14, "y":0},
+                {"label":"K0F (D0,B0)", "x":15, "y":0},
+                {"label":"K10 (D1,B1)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (D1,F5)", "x":1.5, "y":1},
+                {"label":"K12 (D1,F6)", "x":2.5, "y":1},
+                {"label":"K13 (D1,F7)", "x":3.5, "y":1},
+                {"label":"K14 (D1,C7)", "x":4.5, "y":1},
+                {"label":"K15 (D1,C6)", "x":5.5, "y":1},
+                {"label":"K16 (D1,B6)", "x":6.5, "y":1},
+                {"label":"K17 (D1,B5)", "x":7.5, "y":1},
+                {"label":"K18 (D1,B4)", "x":8.5, "y":1},
+                {"label":"K19 (D1,D7)", "x":9.5, "y":1},
+                {"label":"K1A (D1,D6)", "x":10.5, "y":1},
+                {"label":"K1B (D1,D4)", "x":11.5, "y":1},
+                {"label":"K1C (D1,D5)", "x":12.5, "y":1},
+                {"label":"K1D (D1,D3)", "x":13.5, "y":1, "w":1.5},
+                {"label":"K1F (D1,B0)", "x":15, "y":1},
+                {"label":"K20 (F0,B1)", "x":0, "y":2, "w":1.75},
+                {"label":"K21 (F0,F5)", "x":1.75, "y":2},
+                {"label":"K22 (F0,F6)", "x":2.75, "y":2},
+                {"label":"K23 (F0,F7)", "x":3.75, "y":2},
+                {"label":"K24 (F0,C7)", "x":4.75, "y":2},
+                {"label":"K25 (F0,C6)", "x":5.75, "y":2},
+                {"label":"K26 (F0,B6)", "x":6.75, "y":2},
+                {"label":"K27 (F0,B5)", "x":7.75, "y":2},
+                {"label":"K28 (F0,B4)", "x":8.75, "y":2},
+                {"label":"K29 (F0,D7)", "x":9.75, "y":2},
+                {"label":"K2A (F0,D6)", "x":10.75, "y":2},
+                {"label":"K2B (F0,D4)", "x":11.75, "y":2},
+                {"label":"K2D (F0,D3)", "x":12.75, "y":2, "w":2.25},
+                {"label":"K2F (F0,B0)", "x":15, "y":2},
+                {"label":"K30 (F4,B1)", "x":0, "y":3, "w":2.25},
+                {"label":"K32 (F4,F6)", "x":2.25, "y":3},
+                {"label":"K33 (F4,F7)", "x":3.25, "y":3},
+                {"label":"K34 (F4,C7)", "x":4.25, "y":3},
+                {"label":"K35 (F4,C6)", "x":5.25, "y":3},
+                {"label":"K36 (F4,B6)", "x":6.25, "y":3},
+                {"label":"K37 (F4,B5)", "x":7.25, "y":3},
+                {"label":"K38 (F4,B4)", "x":8.25, "y":3},
+                {"label":"K39 (F4,D7)", "x":9.25, "y":3},
+                {"label":"K3A (F4,D6)", "x":10.25, "y":3},
+                {"label":"K3B (F4,D4)", "x":11.25, "y":3},
+                {"label":"K3C (F4,D5)", "x":12.25, "y":3, "w":1.75},
+                {"label":"K3D (F4,D3)", "x":14, "y":3},
+                {"label":"K3F (F4,B0)", "x":15, "y":3},
+                {"label":"K40 (F1,B1)", "x":0, "y":4, "w":1.5},
+                {"label":"K41 (F1,F5)", "x":1.5, "y":4},
+                {"label":"K42 (F1,F6)", "x":2.5, "y":4, "w":1.5},
+                {"label":"K46 (F1,B6)", "x":4, "y":4, "w":7},
+                {"label":"K4A (F1,D6)", "x":11, "y":4, "w":1.5},
+                {"label":"K4C (F1,D5)", "x":13, "y":4},
+                {"label":"K4D (F1,D3)", "x":14, "y":4},
+                {"label":"K4F (F1,B0)", "x":15, "y":4}
+            ]
+        },
+        "LAYOUT_iso_all": {
+            "key_count": 71,
+            "layout": [
+                {"label":"K00 (D0,B1)", "x":0, "y":0},
+                {"label":"K01 (D0,F5)", "x":1, "y":0},
+                {"label":"K02 (D0,F6)", "x":2, "y":0},
+                {"label":"K03 (D0,F7)", "x":3, "y":0},
+                {"label":"K04 (D0,C7)", "x":4, "y":0},
+                {"label":"K05 (D0,C6)", "x":5, "y":0},
+                {"label":"K06 (D0,B6)", "x":6, "y":0},
+                {"label":"K07 (D0,B5)", "x":7, "y":0},
+                {"label":"K08 (D0,B4)", "x":8, "y":0},
+                {"label":"K09 (D0,D7)", "x":9, "y":0},
+                {"label":"K0A (D0,D6)", "x":10, "y":0},
+                {"label":"K0B (D0,D4)", "x":11, "y":0},
+                {"label":"K0C (D0,D5)", "x":12, "y":0},
+                {"label":"K0D (D0,D3)", "x":13, "y":0},
+                {"label":"K0E (D0,D2)", "x":14, "y":0},
+                {"label":"K0F (D0,B0)", "x":15, "y":0},
+                {"label":"K10 (D1,B1)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (D1,F5)", "x":1.5, "y":1},
+                {"label":"K12 (D1,F6)", "x":2.5, "y":1},
+                {"label":"K13 (D1,F7)", "x":3.5, "y":1},
+                {"label":"K14 (D1,C7)", "x":4.5, "y":1},
+                {"label":"K15 (D1,C6)", "x":5.5, "y":1},
+                {"label":"K16 (D1,B6)", "x":6.5, "y":1},
+                {"label":"K17 (D1,B5)", "x":7.5, "y":1},
+                {"label":"K18 (D1,B4)", "x":8.5, "y":1},
+                {"label":"K19 (D1,D7)", "x":9.5, "y":1},
+                {"label":"K1A (D1,D6)", "x":10.5, "y":1},
+                {"label":"K1B (D1,D4)", "x":11.5, "y":1},
+                {"label":"K1C (D1,D5)", "x":12.5, "y":1},
+                {"label":"K1F (D1,B0)", "x":15, "y":1},
+                {"label":"K20 (F0,B1)", "x":0, "y":2, "w":1.75},
+                {"label":"K21 (F0,F5)", "x":1.75, "y":2},
+                {"label":"K22 (F0,F6)", "x":2.75, "y":2},
+                {"label":"K23 (F0,F7)", "x":3.75, "y":2},
+                {"label":"K24 (F0,C7)", "x":4.75, "y":2},
+                {"label":"K25 (F0,C6)", "x":5.75, "y":2},
+                {"label":"K26 (F0,B6)", "x":6.75, "y":2},
+                {"label":"K27 (F0,B5)", "x":7.75, "y":2},
+                {"label":"K28 (F0,B4)", "x":8.75, "y":2},
+                {"label":"K29 (F0,D7)", "x":9.75, "y":2},
+                {"label":"K2A (F0,D6)", "x":10.75, "y":2},
+                {"label":"K2B (F0,D4)", "x":11.75, "y":2},
+                {"label":"K1D (D1,D3)", "x":12.75, "y":2},
+                {"label":"K2D (F0,D3)", "x":13.75, "y":1, "w":1.25, "h":2},
+                {"label":"K2F (F0,B0)", "x":15, "y":2},
+                {"label":"K30 (F4,B1)", "x":0, "y":3, "w":1.25},
+                {"label":"K31 (F4,F5)", "x":1.25, "y":3},
+                {"label":"K32 (F4,F6)", "x":2.25, "y":3},
+                {"label":"K33 (F4,F7)", "x":3.25, "y":3},
+                {"label":"K34 (F4,C7)", "x":4.25, "y":3},
+                {"label":"K35 (F4,C6)", "x":5.25, "y":3},
+                {"label":"K36 (F4,B6)", "x":6.25, "y":3},
+                {"label":"K37 (F4,B5)", "x":7.25, "y":3},
+                {"label":"K38 (F4,B4)", "x":8.25, "y":3},
+                {"label":"K39 (F4,D7)", "x":9.25, "y":3},
+                {"label":"K3A (F4,D6)", "x":10.25, "y":3},
+                {"label":"K3B (F4,D4)", "x":11.25, "y":3},
+                {"label":"K3C (F4,D5)", "x":12.25, "y":3, "w":1.75},
+                {"label":"K3D (F4,D3)", "x":14, "y":3},
+                {"label":"K3F (F4,B0)", "x":15, "y":3},
+                {"label":"K40 (F1,B1)", "x":0, "y":4, "w":1.25},
+                {"label":"K41 (F1,F5)", "x":1.25, "y":4, "w":1.25},
+                {"label":"K42 (F1,F6)", "x":2.5, "y":4, "w":1.25},
+                {"label":"K44 (F1,C7)", "x":3.75, "y":4, "w":2.25},
+                {"label":"K46 (F1,B6)", "x":6, "y":4, "w":1.25},
+                {"label":"K48 (F1,B4)", "x":7.25, "y":4, "w":2.75},
+                {"label":"K4A (F1,D6)", "x":10, "y":4, "w":1.25},
+                {"label":"K4B (F1,D4)", "x":11.25, "y":4, "w":1.25},
+                {"label":"K4C (F1,D5)", "x":13, "y":4},
+                {"label":"K4D (F1,D3)", "x":14, "y":4},
+                {"label":"K4F (F1,B0)", "x":15, "y":4}
+            ]
+        },
+        "LAYOUT_all": {
+            "key_count": 71,
+            "layout": [
+                {"label":"K00 (D0,B1)", "x":0, "y":0},
+                {"label":"K01 (D0,F5)", "x":1, "y":0},
+                {"label":"K02 (D0,F6)", "x":2, "y":0},
+                {"label":"K03 (D0,F7)", "x":3, "y":0},
+                {"label":"K04 (D0,C7)", "x":4, "y":0},
+                {"label":"K05 (D0,C6)", "x":5, "y":0},
+                {"label":"K06 (D0,B6)", "x":6, "y":0},
+                {"label":"K07 (D0,B5)", "x":7, "y":0},
+                {"label":"K08 (D0,B4)", "x":8, "y":0},
+                {"label":"K09 (D0,D7)", "x":9, "y":0},
+                {"label":"K0A (D0,D6)", "x":10, "y":0},
+                {"label":"K0B (D0,D4)", "x":11, "y":0},
+                {"label":"K0C (D0,D5)", "x":12, "y":0},
+                {"label":"K0D (D0,D3)", "x":13, "y":0},
+                {"label":"K0E (D0,D2)", "x":14, "y":0},
+                {"label":"K0F (D0,B0)", "x":15, "y":0},
+                {"label":"K10 (D1,B1)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (D1,F5)", "x":1.5, "y":1},
+                {"label":"K12 (D1,F6)", "x":2.5, "y":1},
+                {"label":"K13 (D1,F7)", "x":3.5, "y":1},
+                {"label":"K14 (D1,C7)", "x":4.5, "y":1},
+                {"label":"K15 (D1,C6)", "x":5.5, "y":1},
+                {"label":"K16 (D1,B6)", "x":6.5, "y":1},
+                {"label":"K17 (D1,B5)", "x":7.5, "y":1},
+                {"label":"K18 (D1,B4)", "x":8.5, "y":1},
+                {"label":"K19 (D1,D7)", "x":9.5, "y":1},
+                {"label":"K1A (D1,D6)", "x":10.5, "y":1},
+                {"label":"K1B (D1,D4)", "x":11.5, "y":1},
+                {"label":"K1C (D1,D5)", "x":12.5, "y":1},
+                {"label":"K1D (D1,D3)", "x":13.5, "y":1, "w":1.5},
+                {"label":"K1F (D1,B0)", "x":15, "y":1},
+                {"label":"K20 (F0,B1)", "x":0, "y":2, "w":1.75},
+                {"label":"K21 (F0,F5)", "x":1.75, "y":2},
+                {"label":"K22 (F0,F6)", "x":2.75, "y":2},
+                {"label":"K23 (F0,F7)", "x":3.75, "y":2},
+                {"label":"K24 (F0,C7)", "x":4.75, "y":2},
+                {"label":"K25 (F0,C6)", "x":5.75, "y":2},
+                {"label":"K26 (F0,B6)", "x":6.75, "y":2},
+                {"label":"K27 (F0,B5)", "x":7.75, "y":2},
+                {"label":"K28 (F0,B4)", "x":8.75, "y":2},
+                {"label":"K29 (F0,D7)", "x":9.75, "y":2},
+                {"label":"K2A (F0,D6)", "x":10.75, "y":2},
+                {"label":"K2B (F0,D4)", "x":11.75, "y":2},
+                {"label":"K2D (F0,D3)", "x":12.75, "y":2, "w":2.25},
+                {"label":"K2F (F0,B0)", "x":15, "y":2},
+                {"label":"K30 (F4,B1)", "x":0, "y":3, "w":1.25},
+                {"label":"K31 (F4,F5)", "x":1.25, "y":3},
+                {"label":"K32 (F4,F6)", "x":2.25, "y":3},
+                {"label":"K33 (F4,F7)", "x":3.25, "y":3},
+                {"label":"K34 (F4,C7)", "x":4.25, "y":3},
+                {"label":"K35 (F4,C6)", "x":5.25, "y":3},
+                {"label":"K36 (F4,B6)", "x":6.25, "y":3},
+                {"label":"K37 (F4,B5)", "x":7.25, "y":3},
+                {"label":"K38 (F4,B4)", "x":8.25, "y":3},
+                {"label":"K39 (F4,D7)", "x":9.25, "y":3},
+                {"label":"K3A (F4,D6)", "x":10.25, "y":3},
+                {"label":"K3B (F4,D4)", "x":11.25, "y":3},
+                {"label":"K3C (F4,D5)", "x":12.25, "y":3, "w":1.75},
+                {"label":"K3D (F4,D3)", "x":14, "y":3},
+                {"label":"K3F (F4,B0)", "x":15, "y":3},
+                {"label":"K40 (F1,B1)", "x":0, "y":4, "w":1.25},
+                {"label":"K41 (F1,F5)", "x":1.25, "y":4, "w":1.25},
+                {"label":"K42 (F1,F6)", "x":2.5, "y":4, "w":1.25},
+                {"label":"K44 (F1,C7)", "x":3.75, "y":4, "w":2.25},
+                {"label":"K46 (F1,B6)", "x":6, "y":4, "w":1.25},
+                {"label":"K48 (F1,B4)", "x":7.25, "y":4, "w":2.75},
+                {"label":"K4A (F1,D6)", "x":10, "y":4, "w":1.25},
+                {"label":"K4B (F1,D4)", "x":11.25, "y":4, "w":1.25},
+                {"label":"K4C (F1,D5)", "x":13, "y":4},
+                {"label":"K4D (F1,D3)", "x":14, "y":4},
+                {"label":"K4F (F1,B0)", "x":15, "y":4}
+            ]
+        }
+    }
+}

keyboards/foxlab/key65/universal/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_DEL,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,      KC_INS,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,              KC_PGUP,
+        KC_LSFT,   KC_SPC,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,        KC_UP,   KC_PGDN,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                 KC_SPC,    KC_SPC,    KC_SPC,              KC_RALT,   MO(1),          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_all(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______,
+        _______,     RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,      _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,             _______,
+        _______,   _______, _______, _______, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, _______, _______, _______, _______, _______,        _______, _______,
+        _______,   _______,   _______,   _______,                 _______,   _______,             _______,   _______,        _______, _______, _______
+    ),
+
+};
+

keyboards/foxlab/key65/universal/keymaps/via/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_DEL,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,      KC_INS,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,              KC_PGUP,
+        KC_LSFT,   KC_SPC,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,        KC_UP,   KC_PGDN,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                 KC_SPC,    KC_SPC,    KC_SPC,              KC_RALT,   MO(1),          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_all(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______,
+        _______,     RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,      _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,             _______,
+        _______,   _______, _______, _______, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, _______, _______, _______, _______, _______,        _______, _______,
+        _______,   _______,   _______,   _______,                 _______,   _______,             _______,   _______,        _______, _______, _______
+    ),
+    [2] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,             _______,
+        _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______,
+        _______,   _______,   _______,   _______,                 _______,   _______,             _______,   _______,        _______, _______, _______
+    ),
+    [3] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,             _______,
+        _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______,
+        _______,   _______,   _______,   _______,                 _______,   _______,             _______,   _______,        _______, _______, _______
+    ),
+};

keyboards/foxlab/key65/universal/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/foxlab/key65/universal/readme.md

@@ -0,0 +1,22 @@
+# Foxlab Key 65 Universal
+
+![Key 65](https://i.imgur.com/28Qck8ul.jpg)
+
+Key 65 is featured with the three-layer case and dual-gasket structure. The plate mounting system is an improved version of the gasket sandwich on Leaf 60. In addition, we add gaskets between the middle case and the bottom case. There's an optional rubber sheet between the PCB and the plate. The numerous options will offer you the most freedom to make the keyboard look and feel as you wish.
+
+* Keyboard Maintainer: QMK
+* Hardware Supported: Key 65 Universal PCB
+* Hardware Availability: [Group Buy](https://geekhack.org/index.php?topic=102609.0)
+
+This version is for the universal variant with the layouts below available:
+![Layout](https://i.imgur.com/MQTZV0ol.png)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make foxlab/key65/universal:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## RGB LED support
+
+The universal PCB supports RGB LEDs as an LED strip, but is not supplied with one. To use RGB LEDs, you should configure the RGBLED_NUM to match the number of LEDs on your strip.

keyboards/foxlab/key65/universal/rules.mk

@@ -0,0 +1,29 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+LAYOUTS = 65_ansi_blocker_split_bs # Support community layouts

keyboards/foxlab/key65/universal/universal.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "universal.h"
+
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(E6);
+    writePinHigh(E6);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(E6, !led_state.caps_lock);
+    }
+    return true;
+}

keyboards/foxlab/key65/universal/universal.h

@@ -0,0 +1,75 @@
+/* Copyright 2020 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_65_ansi_blocker_split_bs( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F,   \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,    K1F,   \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,     K2D,    K2F,   \
+       K30,    K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,   K3C,   K3D, K3F,   \
+    K40,  K41,  K42,                K46,              K4A,  K4B,     K4C, K4D, K4F    \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO, K1F   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   KC_NO, K2F   }, \
+    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   KC_NO, K3F   }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   KC_NO, K4F   }, \
+}
+
+#define LAYOUT_65_ansi_blocker_tsangan_split_bs( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F,   \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,    K1F,   \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,     K2D,    K2F,   \
+       K30,    K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,   K3C,   K3D, K3F,   \
+    K40,  K41,  K42,                K46,                    K4B,     K4C, K4D, K4F    \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO, K1F   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   KC_NO, K2F   }, \
+    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   KC_NO, K3F   }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, KC_NO, K4B,   K4C,   K4D,   KC_NO, K4F   }, \
+}
+
+#define LAYOUT_iso_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F,   \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,         K1F,   \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D,  K2D,  K2F,   \
+    K30,  K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,   K3C,   K3D, K3F,   \
+    K40,  K41,  K42,          K44,  K46,  K48,        K4A,  K4B,     K4C, K4D, K4F    \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO, K1F   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   KC_NO, K2F   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   KC_NO, K3F   }, \
+    { K40,   K41,   K42,   KC_NO, K44,   KC_NO, K46,   KC_NO, K48,   KC_NO, K4A,   K4B,   K4C,   K4D,   KC_NO, K4F   }, \
+}
+
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F,   \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,    K1F,   \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,     K2D,    K2F,   \
+    K30,  K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,   K3C,   K3D, K3F,   \
+    K40,  K41,  K42,          K44,  K46,  K48,        K4A,  K4B,     K4C, K4D, K4F    \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO, K1F   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   KC_NO, K2F   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   KC_NO, K3F   }, \
+    { K40,   K41,   K42,   KC_NO, K44,   KC_NO, K46,   KC_NO, K48,   KC_NO, K4A,   K4B,   K4C,   K4D,   KC_NO, K4F   }, \
+}

keyboards/gingham/readme.md

@@ -4,7 +4,7 @@
 
 A 60% keyboard with only through hole components.   
 
-Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)  
 Hardware Supported: ATMEGA328p with vusb [PCB](https://github.com/yiancar/gingham_pcb)  
 Hardware Availability: https://yiancar-designs.com/, https://novelkeys.xyz, https://mechboards.co.uk/  
 

keyboards/handwired/fruity60/readme.md

@@ -5,7 +5,7 @@
 A 60% tsangan, split bs/rs keyboard designed to support the bluefruit 32u4 ble controller
 
 Keyboard Maintainer: [Yan-Fa Li](https://github.com/yanfali)<br>
-Hardware Supported: [github](https://github.com/yanfali/fruity60)<br>
+Hardware Supported: [GitHub](https://github.com/yanfali/fruity60)<br>
 Hardware Availability: You can make them yourself by downloading kicad and generating gerbers.<br>
 
 Make example for this keyboard (after setting up your build environment):

keyboards/handwired/k8split/README.md

@@ -0,0 +1,21 @@
+# k8split
+![left](https://raw.githubusercontent.com/Ckath/k8split/master/k8split_left.png)
+![right](https://raw.githubusercontent.com/Ckath/k8split/master/k8split_right.png)
+
+my personal 8x6(x2) split keyboard, aiming to be a mostly normal keyboard layout with plenty of keys. see the hardware repo for more info.
+
+* Keyboard Maintainer: [Ckath](https://github.com/Ckath)
+* Hardware: https://github.com/Ckath/k8split
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/k8split:default
+
+Flashing (both halves are separate keyboards and the default layout is just for debugging):
+
+    # left
+    make handwired/k8split:left:flash
+    # right
+    make handwired/k8split:right:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/k8split/config.h

@@ -0,0 +1,48 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC81D
+#define PRODUCT_ID      0xC868
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ckat
+#define PRODUCT         k8split
+#define DESCRIPTION     custom split keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D5, D3, D2, D1, D0, B7 }
+#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4 }
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW

keyboards/handwired/k8split/k8split.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "k8split.h"

keyboards/handwired/k8split/k8split.h

@@ -0,0 +1,37 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00, k06, k12, k18, k24, k30, k36, k42, \
+    k01, k07, k13, k19, k25, k31, k37, k43, \
+    k02, k08, k14, k20, k26, k32, k38, k44, \
+    k03, k09, k15, k21, k27, k33, k39, k45, \
+    k04, k10, k16, k22, k28, k34, k40, k46, \
+    k05, k11, k17, k23, k29, k35, k41, k47 \
+) \
+{ \
+    { k00, k06, k12, k18, k24, k30, k36, k42 }, \
+    { k01, k07, k13, k19, k25, k31, k37, k43 }, \
+    { k02, k08, k14, k20, k26, k32, k38, k44 }, \
+    { k03, k09, k15, k21, k27, k33, k39, k45 }, \
+    { k04, k10, k16, k22, k28, k34, k40, k46 }, \
+    { k05, k11, k17, k23, k29, k35, k41, k47 } \
+}

keyboards/handwired/k8split/keymaps/default/keymap.c

@@ -0,0 +1,33 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+/* DEBUG
+   default map is strictly for debugging shorts
+   flash either the left or right keymap accordingly */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_0, KC_5, KC_0, KC_5, KC_0, KC_5, KC_0, KC_5,
+        KC_1, KC_4, KC_1, KC_4, KC_1, KC_4, KC_1, KC_4,
+        KC_2, KC_3, KC_2, KC_3, KC_2, KC_3, KC_2, KC_3,
+        KC_3, KC_2, KC_3, KC_2, KC_3, KC_2, KC_3, KC_2,
+        KC_4, KC_1, KC_4, KC_1, KC_4, KC_1, KC_4, KC_1,
+        KC_5, KC_0, KC_5, KC_0, KC_5, KC_0, KC_5, KC_0 
+    )
+};

keyboards/handwired/k8split/keymaps/left/config.h

@@ -0,0 +1,21 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* ensure NKRO is on */
+#define FORCE_NKRO

keyboards/handwired/k8split/keymaps/left/keymap.c

@@ -0,0 +1,47 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+#define KC_AUDIO_MMUTE KC_F20
+#define KC_COMP KC_APP
+
+/* LEFT
+   +---------------------------------------+
+   | ESC| F1 | F2 | F3 | F4 | F5 | F6 |MUTE|
+   +---------------------------------------|
+   | `  | 1  | 2  | 3  | 4  | 5  | 6  |MMIC| 
+   +-----------------------------------------+
+   | TAB  | q  | w  | e  | r  | t  | JP | MWU|
+   +------------------------------------------+
+   | CTRL  | a  | s  | d  | f  | g  |COMP| MWD|
+   +---------------------------------------------|
+   | SHIFT    | z  | x  | c  | v  | b  | F13| F14|
+   +-------------------------------------------------+
+   | CTRL |CAPS|SUPR| ALT |   SPACE   | F15| F16| F17|
+   +-------------------------------------------------+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_AUDIO_MUTE,
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_AUDIO_MMUTE,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_MHEN, KC_MS_WH_UP,
+        KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_COMP, KC_MS_WH_DOWN,
+        KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F13, KC_F14,
+        KC_LCTRL, KC_CAPS, KC_LWIN, KC_LALT, KC_SPC, KC_F15, KC_F16, KC_F17
+    )
+};

keyboards/handwired/k8split/keymaps/right/config.h

@@ -0,0 +1,21 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* ensure NKRO is on */
+#define FORCE_NKRO

keyboards/handwired/k8split/keymaps/right/keymap.c

@@ -0,0 +1,45 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+/* RIGHT
+            +---------------------------------------+
+            | F7 | F8 | F9 | F10| F11| F12| INS|PSCR|
+       +--------------------------------------------|
+       | DEL| 7  | 8  | 9  | 0  | -  | =  |  BCKSPC | 
+       +--------------------------------------------|
+          | y  | u  | i  | o  | p  | [  | ]  |   \  |
+      +---------------------------------------------|
+      |PGUP| h  | j  | k  | l  | ;  | '  |    ENTER |
+    +-----------------------------------------------|
+    |HOME|PGDN| n  | m  | ,  | .  | /  |      SHIFT |
+  +-------------------------------------------------+
+  | END|   SPACE   | ALT | <- | ↓  | ↑  | -> | CTRL |
+  +-------------------------------------------------+ */
+
+/* /!\: rows are reversed in this half because I did all pcb design drunk */
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_END, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_RCTRL,
+        KC_HOME, KC_PGDN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSHIFT,
+        KC_PGUP, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER,
+        KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_DEL, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_PSCR
+    )
+};

keyboards/handwired/k8split/rules.mk

@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/handwired/mechboards_micropad/readme.md

@@ -3,7 +3,7 @@ Mechboards Micropad
 
 This was a freebie, use me and find out more about me :)
 
-Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)  
 Hardware Supported: ATMega32u4  
 Hardware Availability: Random mechboards.co.uk order and UK meetups!
 

keyboards/handwired/onekey/keymaps/default_json/keymap.json

@@ -0,0 +1,9 @@
+{
+ "keyboard":"handwired/onekey/pytest",
+ "keymap":"default_json",
+ "layout":"LAYOUT",
+ "layers":[["KC_A"]],
+ "author":"qmk",
+ "notes":"This file is a keymap.json file for handwired/onekey/pytest",
+ "version":1
+}

keyboards/handwired/onekey/pytest/templates/keymap.c

@@ -1 +1,2 @@
+#include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {__KEYMAP_GOES_HERE__};

keyboards/helix/rev2/keymaps/yshrsmz/config.h

@@ -17,10 +17,10 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
+
 #pragma once
 
-/* auto shift config */
-#define AUTO_SHIFT_TIMEOUT 150
+// place overrides here
 
 // If you need more program area, try select and reduce rgblight modes to use.
 

keyboards/helix/rev2/keymaps/yshrsmz/keymap.c

@@ -11,7 +11,6 @@
   #include "ssd1306.h"
 #endif
 
-extern keymap_config_t keymap_config;
 
 #ifdef RGBLIGHT_ENABLE
 //Following line allows macro to read current RGB settings
@@ -26,20 +25,24 @@ extern uint8_t is_master;
 // entirely and just use numbers.
 enum layer_number {
     _QWERTY = 0,
+    _COLEMAK,
+    _DVORAK,
     _LOWER,
     _RAISE,
-    _FUNC,
     _ADJUST
 };
 
 enum custom_keycodes {
   QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
   LOWER,
   RAISE,
-  FUNC,
   ADJUST,
+  BACKLIT,
   EISU,
-  KANA
+  KANA,
+  RGBRST
 };
 
 enum macro_keycodes {
@@ -54,23 +57,65 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Qwerty
    * ,-----------------------------------------.             ,-----------------------------------------.
-   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  |  =   |
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  |  -   |
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * | ESC  |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |Shift |   Z  |   X  |   C  |   V  |   B  | Fn   | Fn   |   N  |   M  |   ,  |   .  |   /  |Shift |
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   N  |   M  |   ,  |   .  |   /  |Enter |
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * | EISU | Ctrl | Alt  | GUI  |Lower |Space | Bksp |Enter |Space |Raise | GUI  | Alt  | Ctrl | KANA |
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_QWERTY] = LAYOUT( \
-      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_EQL, \
-      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_MINS, \
-      KC_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    FUNC,    FUNC,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-      EISU,    KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_BSPC, KC_ENT,  KC_SPC,  RAISE,   KC_RGUI, KC_RALT, KC_RCTL, KANA \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+      KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LBRC, KC_RBRC, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+      ),
+
+  /* Colemak
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   F  |   P  |   G  |             |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   R  |   S  |   T  |   D  |             |   H  |   N  |   E  |   I  |   O  |  '   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   K  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_COLEMAK] = LAYOUT( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                      KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+      KC_LCTL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,                      KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LBRC, KC_RBRC, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+      ),
+
+  /* Dvorak
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Tab  |   '  |   ,  |   .  |   P  |   Y  |             |   F  |   G  |   C  |   R  |   L  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   O  |   E  |   U  |   I  |             |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |   [  |   ]  |   B  |   M  |   W  |   V  |   Z  |Enter |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_DVORAK] = LAYOUT( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+      KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                      KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL, \
+      KC_LCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                      KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+      KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_LBRC, KC_RBRC, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
       ),
 
   /* Lower
@@ -79,9 +124,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
    * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      |      |      |      |
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  (   |   )  |  F12 |      |      | Home | End  |      |
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
    * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
    * `-------------------------------------------------------------------------------------------------'
@@ -89,8 +134,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_LOWER] = LAYOUT( \
       KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
       KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
-      KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
-      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,  _______, _______, _______, _______, _______, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_LPRN, KC_RPRN, KC_F12,  _______, _______, KC_HOME, KC_END,  _______, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
       ),
 
@@ -100,9 +145,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
    * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      |      |      |      |
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      |PageDn|PageUp|      |
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
    * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
    * `-------------------------------------------------------------------------------------------------'
@@ -110,29 +155,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_RAISE] = LAYOUT( \
       KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
       KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
-      KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,  _______, _______, _______, _______, _______, \
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-      ),
-
-  /* Func
-   * ,-----------------------------------------.             ,-----------------------------------------.
-   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Bksp |
-   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
-   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      |      |      |      |      |      |             | LEFT | DOWN |  UP  |RIGHT | PGUP |      |
-   * |------+------+------+------+------+------|------+------|------+------+------+------+------+------|
-   * |      |      |      |      |      |      |      |      | HOME | END  |Alt+← |Alt+→ | PGDN |      |
-   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
-   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
-   * `-------------------------------------------------------------------------------------------------'
-   */
-  [_FUNC] = LAYOUT( \
-      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
-      _______, _______, _______, _______, _______, _______,                   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_PGUP, _______, \
-      _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END,  LALT(KC_LEFT), LALT(KC_RGHT), KC_PGDN, _______, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,  _______, _______, KC_PGDN, KC_PGUP, _______, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
       ),
 
@@ -140,9 +164,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * ,-----------------------------------------.             ,-----------------------------------------.
    * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      | Reset|      |      |      |      |             |      |      |      |      |      |  Del |
+   * |      | Reset|RGBRST|      |      |      |             |      |      |      |      |      |  Del |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      |      |      |Aud on|Audoff| Mac  |             | Win  |Qwerty|      |      |      |      |
+   * |      |      |      |Aud on|Audoff| Mac  |             | Win  |Qwerty|Colemk|Dvorak|      |      |
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
    * |      |      |      |      |      |      |      |      |      |      |RGB ON| HUE+ | SAT+ | VAL+ |
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
@@ -151,8 +175,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
   [_ADJUST] =  LAYOUT( \
       KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-      _______, RESET,   _______, _______, _______, _______,                   _______, _______, _______, _______, _______, KC_DEL, \
-      _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM,                   AG_SWAP, QWERTY,  _______, _______, _______, _______, \
+      _______, RESET,   RGBRST,  _______, _______, _______,                   _______, _______, _______, _______, _______, KC_DEL, \
+      _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM,                   AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \
       )
@@ -164,81 +188,99 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Qwerty
    * ,-----------------------------------------.             ,-----------------------------------------.
-   * |   =  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  |  -   |
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * | Esc  |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
    * | Shift|   Z  |   X  |   C  |   V  |   B  |             |   N  |   M  |   ,  |   .  |   /  |Enter |
    * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
-   * | EISU | Ctrl | Alt  | GUI  |ESC/Lower | Func | Bksp |Enter |Space |Raise | GUI  | Alt  | Ctrl | KANA |
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_QWERTY] = LAYOUT( \
-      KC_EQL,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_MINS, \
-      KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+      KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
       KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-      EISU,    KC_LCTL, KC_LALT, KC_LGUI, LT(_LOWER, KC_ESC),   FUNC,  KC_BSPC, KC_ENT,    KC_SPC,  RAISE,   KC_RGUI, KC_RALT, KC_RCTL, KANA \
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+      ),
+
+  /* Colemak
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   Q  |   W  |   F  |   P  |   G  |             |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   R  |   S  |   T  |   D  |             |   H  |   N  |   E  |   I  |   O  |  '   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |             |   K  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_COLEMAK] = LAYOUT( \
+      KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                      KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+      KC_LCTL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,                      KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+      ),
+
+  /* Dvorak
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   '  |   ,  |   .  |   P  |   Y  |             |   F  |   G  |   C  |   R  |   L  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   O  |   E  |   U  |   I  |             |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |             |   B  |   M  |   W  |   V  |   Z  |Enter |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_DVORAK] = LAYOUT( \
+      KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                      KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL, \
+      KC_LCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                      KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+      KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,                      KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
       ),
 
   /* Lower
    * ,-----------------------------------------.             ,-----------------------------------------.
    * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      |      |      |      |
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      | Home | End  |      |
    * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
    * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_LOWER] = LAYOUT( \
       KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
-      KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
-      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    KC_F12,  _______, _______, _______, _______, _______, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    KC_F12,  _______, _______, KC_HOME, KC_END,  _______, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
       ),
 
   /* Raise
    * ,-----------------------------------------.             ,-----------------------------------------.
-   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  |      |
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      |      |      |      |
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      |PageDn|PageUp|      |
    * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
    * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_RAISE] = LAYOUT( \
-      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, \
-      KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    KC_F12,  _______, _______, _______, _______, _______, \
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-      ),
-
-    /* Func
-   * ,-----------------------------------------.             ,-----------------------------------------.
-   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
-   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      |      |      |      |      |      |             | LEFT | DOWN |  UP  |RIGHT | PGUP |      |
-   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      |      |      |      |      |      |             | HOME | END  |Alt+← |Alt+→ | PGDN |      |
-   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
-   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
-   * `-------------------------------------------------------------------------------------------------'
-   */
-  [_FUNC] = LAYOUT( \
       KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
-      _______, _______, _______, _______, _______, _______,                   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_PGUP, _______, \
-      _______, _______, _______, _______, _______, _______,                   KC_HOME, KC_END,  LALT(KC_LEFT), LALT(KC_RGHT), KC_PGDN, _______, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    KC_F12,  _______, _______, KC_PGDN, KC_PGUP, _______, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
       ),
 
   /* Adjust (Lower + Raise)
    * ,-----------------------------------------.             ,-----------------------------------------.
-   * |      | Reset|      |      |      |      |             |      |      |      |      |      |  Del |
+   * |      | Reset|RGBRST|      |      |      |             |      |      |      |      |      |  Del |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      |      |      |Aud on|Audoff| Mac  |             | Win  |Qwerty|      |      |      |      |
+   * |      |      |      |Aud on|Audoff| Mac  |             | Win  |Qwerty|Colemk|Dvorak|      |      |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
    * |      |      |      |      |      |      |             |      |      |RGB ON| HUE+ | SAT+ | VAL+ |
    * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
@@ -246,8 +288,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-------------------------------------------------------------------------------------------------'
    */
   [_ADJUST] =  LAYOUT( \
-      _______, RESET,   _______, _______, _______, _______,                   _______, _______, _______, _______, _______, KC_DEL, \
-      _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM,                   AG_SWAP, QWERTY,  _______, _______, _______, _______, \
+      _______, RESET,    RGBRST, _______, _______, _______,                   _______, _______, _______, _______, _______, KC_DEL, \
+      _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM,                   AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
       _______, _______, _______, _______, _______, _______,                   _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \
       )
@@ -272,11 +314,6 @@ float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
 bool TOG_STATUS = false;
 int RGB_current_mode;
 
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
 // Setting ADJUST layer RGB back to default
 void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
   if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
@@ -296,7 +333,25 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef AUDIO_ENABLE
           PLAY_SONG(tone_qwerty);
         #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_colemak);
+        #endif
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_dvorak);
+        #endif
+        set_single_persistent_default_layer(_DVORAK);
       }
       return false;
       break;
@@ -346,14 +401,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
-    case FUNC:
-      if (record->event.pressed) {
-          layer_on(_FUNC);
-        } else {
-          layer_off(_FUNC);
-        }
-        return false;
-        break;
     case ADJUST:
         if (record->event.pressed) {
           layer_on(_ADJUST);
@@ -397,6 +444,15 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
   }
   return true;
 }
@@ -444,14 +500,7 @@ void music_scale_user(void)
 //SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
 #ifdef SSD1306OLED
 
-// hook point for 'led_test' keymap
-//   'default' keymap's led_test_init() is empty function, do nothing
-//   'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(RGBLIGHT_MODE_RGB_TEST);
-__attribute__ ((weak))
-void led_test_init(void) {}
-
 void matrix_scan_user(void) {
-     led_test_init();
      iota_gfx_task();  // this is what updates the display continuously
 }
 
@@ -467,41 +516,42 @@ void matrix_update(struct CharacterMatrix *dest,
 #define L_BASE 0
 #define L_LOWER (1<<_LOWER)
 #define L_RAISE (1<<_RAISE)
-#define L_FUNC (1<<_FUNC)
 #define L_ADJUST (1<<_ADJUST)
 #define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
 
 static void render_logo(struct CharacterMatrix *matrix) {
 
-  static char logo[]={
+  static const char helix_logo[] PROGMEM ={
     0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
     0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
     0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
     0};
-  matrix_write(matrix, logo);
+  matrix_write_P(matrix, helix_logo);
   //matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
 }
 
-
-
-void render_status(struct CharacterMatrix *matrix) {
-
-  // Render to mode icon
-  static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
-  if(keymap_config.swap_lalt_lgui==false){
-    matrix_write(matrix, logo[0][0]);
-    matrix_write_P(matrix, PSTR("\n"));
-    matrix_write(matrix, logo[0][1]);
-  }else{
-    matrix_write(matrix, logo[1][0]);
-    matrix_write_P(matrix, PSTR("\n"));
-    matrix_write(matrix, logo[1][1]);
+static void render_rgbled_status(bool full, struct CharacterMatrix *matrix) {
+#ifdef RGBLIGHT_ENABLE
+  char buf[30];
+  if (RGBLIGHT_MODES > 1 && rgblight_config.enable) {
+      if (full) {
+          snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
+                   rgblight_config.mode,
+                   rgblight_config.hue/RGBLIGHT_HUE_STEP,
+                   rgblight_config.sat/RGBLIGHT_SAT_STEP,
+                   rgblight_config.val/RGBLIGHT_VAL_STEP);
+      } else {
+          snprintf(buf, sizeof(buf), "[%2d] ",rgblight_config.mode);
+      }
+      matrix_write(matrix, buf);
   }
+#endif
+}
 
+static void render_layer_status(struct CharacterMatrix *matrix) {
   // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(matrix, PSTR("\nLayer: "));
+  char buf[10];
+  matrix_write_P(matrix, PSTR("Layer: "));
     switch (layer_state) {
         case L_BASE:
            matrix_write_P(matrix, PSTR("Default"));
@@ -512,24 +562,44 @@ void render_status(struct CharacterMatrix *matrix) {
         case L_LOWER:
            matrix_write_P(matrix, PSTR("Lower"));
            break;
-        case L_FUNC:
-            matrix_write_P(matrix, PSTR("Func"));
-            break;
         case L_ADJUST:
         case L_ADJUST_TRI:
            matrix_write_P(matrix, PSTR("Adjust"));
            break;
         default:
+           matrix_write_P(matrix, PSTR("Undef-"));
+           snprintf(buf,sizeof(buf), "%ld", layer_state);
            matrix_write(matrix, buf);
     }
+}
+
+void render_status(struct CharacterMatrix *matrix) {
+
+  // Render to mode icon
+  static const char os_logo[][2][3] PROGMEM  ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
+  if(keymap_config.swap_lalt_lgui==false){
+    matrix_write_P(matrix, os_logo[0][0]);
+    matrix_write_P(matrix, PSTR("\n"));
+    matrix_write_P(matrix, os_logo[0][1]);
+  }else{
+    matrix_write_P(matrix, os_logo[1][0]);
+    matrix_write_P(matrix, PSTR("\n"));
+    matrix_write_P(matrix, os_logo[1][1]);
+  }
+
+  matrix_write_P(matrix, PSTR(" "));
+  render_layer_status(matrix);
+  matrix_write_P(matrix, PSTR("\n"));
 
   // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(matrix, led);
+  matrix_write_P(matrix, (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ?
+                 PSTR("NUMLOCK") : PSTR("       "));
+  matrix_write_P(matrix, (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ?
+                 PSTR("CAPS") : PSTR("    "));
+  matrix_write_P(matrix, (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ?
+                 PSTR("SCLK") : PSTR("    "));
+  matrix_write_P(matrix, PSTR("\n"));
+  render_rgbled_status(true, matrix);
 }
 
 
@@ -547,6 +617,8 @@ void iota_gfx_task_user(void) {
     render_status(&matrix);
   }else{
     render_logo(&matrix);
+    render_rgbled_status(false, &matrix);
+    render_layer_status(&matrix);
   }
   matrix_update(&display, &matrix);
 }

keyboards/helix/rev2/keymaps/yshrsmz/rules.mk

@@ -6,12 +6,11 @@
 #   See TOP/docs/config_options.md for more information.
 #
 LINK_TIME_OPTIMIZATION_ENABLE = no  # if firmware size over limit, try this option
-AUTO_SHIFT_ENABLE = yes
 
 # Helix Spacific Build Options
 # you can uncomment and edit follows 7 Variables
 #  jp: 以下の7つの変数を必要に応じて編集し、コメントアウトをはずします。
-HELIX_ROWS = 4              # Helix Rows is 4 or 5
+# HELIX_ROWS = 5              # Helix Rows is 4 or 5
 OLED_ENABLE = yes            # OLED_ENABLE
 # LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
 # LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)

keyboards/hs60/v1/readme.md

@@ -5,7 +5,7 @@ HS60
 
 This is a standard fixed layout 60% PCB. It comes in two varians, ISO and ANSI and support full per-key RGB.
 
-Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)  
 Hardware Supported: HS60 ISO and ANSI PCBs with Atmega 32u4   
 Hardware Availability: https://mechboards.co.uk/shop/all/hs60-pcb/   
 

keyboards/hs60/v2/readme.md

@@ -5,7 +5,7 @@ HS60 V2.0
 
 This is a standard fixed layout 60% PCB. It comes in three variants; ISO, ANSI and HHKB and support full per-key RGB.
 
-Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)  
 Hardware Supported: HS60 ISO, ANSI and HHKB PCBs with STM32F303CC   
 Hardware Availability: http://groupbuys.mechboards.co.uk/shop/hs60-hotswap-60-pcb/   
 

keyboards/kbdfans/kbd67/rev1/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
+#define VENDOR_ID       0x4B42
+#define PRODUCT_ID      0x6066
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    kbdfans
 #define PRODUCT         kbd67

keyboards/kbdfans/kbd67/rev1/keymaps/via/keymap.c

@@ -0,0 +1,75 @@
+/* Copyright 2018 'mechmerlin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap (Base Layer) Default Layer
+   * ,----------------------------------------------------------------.
+   * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |Home|
+   * |----------------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |PgUp|
+   * |----------------------------------------------------------------|
+   * |Ctrl   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgDn|
+   * |----------------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|End |
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[0] = LAYOUT_65_ansi(
+  KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
+  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+  KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT, KC_PGDN,
+  KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+  KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                          KC_RALT, MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap Fn Layer
+   * ,----------------------------------------------------------------.
+   * |~ `|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
+   * |----------------------------------------------------------------|
+   * |Caps |   |Up |   |   |   |   |   |PSc|SLk|Pau|Up |   |     |    |
+   * |----------------------------------------------------------------|
+   * |      |Lef|Dow|Rig|   |   |   |   |Hom|PUp|Lef|Rig|        |    |
+   * |----------------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |End|PDn|Dow|      |PUp|    |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |Hom|PDn|End |
+   * `----------------------------------------------------------------'
+   */
+[1] = LAYOUT_65_ansi(
+   KC_GRV,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,          KC_DEL,KC_INS,
+   KC_CAPS,_______,  KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,  KC_UP,_______,     _______,_______,
+      _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,            _______,_______,
+           _______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN,       _______,KC_PGUP,_______,
+    _______,  _______,  _______,                     _______,                     _______,_______,_______,KC_HOME,KC_PGDN, KC_END),
+
+
+[2] = LAYOUT_65_ansi(
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,_______,
+   _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,     _______,_______,
+      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,            _______,_______,
+           _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,       _______,_______,_______,
+    _______,  _______,  _______,                     _______,                     _______,_______,_______,_______,_______,_______),
+
+
+[3] = LAYOUT_65_ansi(
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,_______,
+   _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,     _______,_______,
+      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,            _______,_______,
+           _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,       _______,_______,_______,
+    _______,  _______,  _______,                     _______,                     _______,_______,_______,_______,_______,_______),
+
+};