Remove legacy keycode use from command (#18002)

Co-authored-by: Drashna Jaelre <drashna@live.com>

.github/dependabot.yml

@@ -0,0 +1,9 @@
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    labels: CI
+    reviewers:
+      - "qmk/collaborators"
+    schedule:
+      interval: "daily"

.github/stale.yml

@@ -1,58 +0,0 @@
-# Configuration for probot-stale - https://github.com/probot/stale
-
-# General configuration
-
-# Pull request specific configuration
-pulls:
-  staleLabel: awaiting changes
-  # Number of days of inactivity before an Issue or Pull Request becomes stale
-  daysUntilStale: 45
-  # Number of days of inactivity before a stale Issue or Pull Request is closed.
-  # Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
-  daysUntilClose: 30
-  # Comment to post when marking as stale. Set to `false` to disable
-  markComment: >
-    Thank you for your contribution!
-
-    This pull request has been automatically marked as stale because it has not had
-    activity in the last 45 days. It will be closed in 30 days if no further activity occurs.
-    Please feel free to give a status update now, or re-open when it's ready.
-    
-    For maintainers: Please label with `awaiting review`, `breaking_change`, `in progress`, or `on hold` to prevent 
-    the issue from being re-flagged.
-  # Comment to post when closing a stale Issue or Pull Request.
-  closeComment: >
-    Thank you for your contribution!
-
-    This pull request has been automatically closed because it has not had activity in the last 30 days.
-    Please feel free to give a status update now, ping for review, or re-open when it's ready.
-  # Limit the number of actions per hour, from 1-30. Default is 30
-  limitPerRun: 30
-  exemptLabels:
-    - awaiting review
-    - breaking_change
-    - in progress
-    - on hold
-
-# Issue specific configuration
-issues:
-  staleLabel: stale
-  limitPerRun: 10
-  daysUntilStale: 90
-  daysUntilClose: 30
-  markComment: >
-    This issue has been automatically marked as stale because it has not had activity in the
-    last 90 days. It will be closed in the next 30 days unless it is tagged properly or other activity
-    occurs.
-    
-    For maintainers: Please label with `bug`, `in progress`, `on hold`, `discussion` or `to do` to prevent 
-    the issue from being re-flagged.
-  closeComment: >
-    This issue has been automatically closed because it has not had activity in the last 30 days.
-    If this issue is still valid, re-open the issue and let us know.
-  exemptLabels:
-    - bug
-    - in progress
-    - on hold
-    - discussion
-    - to do

.github/workflows/api.yml

@@ -18,7 +18,7 @@ jobs:
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         fetch-depth: 1
         persist-credentials: false

.github/workflows/auto_tag.yml

@@ -22,12 +22,12 @@ jobs:
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         fetch-depth: 0
 
     - name: Bump version and push tag
-      uses: anothrNick/github-tag-action@1.26.0
+      uses: anothrNick/github-tag-action@1.39.0
       env:
         GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         DEFAULT_BUMP: 'patch'

.github/workflows/cli.yml

@@ -18,7 +18,7 @@ jobs:
     container: qmkfm/qmk_cli
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         submodules: recursive
     - name: Install dependencies

.github/workflows/develop_api.yml

@@ -18,7 +18,7 @@ jobs:
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         fetch-depth: 1
         persist-credentials: false

.github/workflows/develop_update.yml

@@ -12,11 +12,15 @@ jobs:
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}
         fetch-depth: 0
 
+    - name: Disable automatic eol conversion
+      run: |
+        echo "* -text" > .git/info/attributes
+
     - name: Checkout develop
       run: |
         git fetch origin master develop

.github/workflows/docs.yml

@@ -20,7 +20,7 @@ jobs:
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         fetch-depth: 1
 
@@ -34,7 +34,7 @@ jobs:
         qmk --verbose generate-docs
 
     - name: Deploy
-      uses: JamesIves/github-pages-deploy-action@3.7.1
+      uses: JamesIves/github-pages-deploy-action@v4.4.0
       with:
         GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         BASE_BRANCH: master

.github/workflows/feature_branch_update.yml

@@ -17,11 +17,15 @@ jobs:
         - xap
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}
         fetch-depth: 0
 
+    - name: Disable automatic eol conversion
+      run: |
+        echo "* -text" > .git/info/attributes
+
     - name: Checkout branch
       run: |
         git fetch origin develop ${{ matrix.branch }}

.github/workflows/format.yml

@@ -19,7 +19,7 @@ jobs:
     container: qmkfm/qmk_cli
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         fetch-depth: 0
 

.github/workflows/format_push.yml

@@ -13,10 +13,14 @@ jobs:
     container: qmkfm/qmk_cli
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         fetch-depth: 0
 
+    - name: Disable automatic eol conversion
+      run: |
+        echo "* -text" > .git/info/attributes
+
     - name: Install dependencies
       run: |
         pip3 install -r requirements-dev.txt
@@ -37,7 +41,7 @@ jobs:
         git config user.email 'hello@qmk.fm'
 
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v3
+      uses: peter-evans/create-pull-request@v4
       if: ${{ github.repository == 'qmk/qmk_firmware'}}
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}

.github/workflows/lint.yml

@@ -12,10 +12,13 @@ jobs:
     container: qmkfm/qmk_cli
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         fetch-depth: 0
 
+    - name: Install dependencies
+      run: pip3 install -r requirements-dev.txt
+
     - uses: trilom/file-changes-action@v1.2.4
       id: file_changes
       with:

.github/workflows/stale.yml

@@ -0,0 +1,64 @@
+name: 'Close stale issues and PRs'
+on:
+  schedule:
+    - cron: '30 1 * * *'
+  workflow_dispatch:
+
+permissions:
+  issues: write
+  pull-requests: write
+
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/stale@v5
+        with:
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+          remove-stale-when-updated: true
+          exempt-draft-pr: true
+          ascending: true
+          operations-per-run: 150
+
+          stale-issue-label: stale
+          days-before-issue-stale: 90
+          days-before-issue-close: 30
+          exempt-issue-labels: bug,in progress,on hold,discussion,to do
+
+          stale-issue-message: >
+            This issue has been automatically marked as stale because it has not had activity in the
+            last 90 days. It will be closed in the next 30 days unless it is tagged properly or other activity
+            occurs.
+
+            For maintainers: Please label with `bug`, `in progress`, `on hold`, `discussion` or `to do` to prevent
+            the issue from being re-flagged.
+
+          close-issue-message: >
+            This issue has been automatically closed because it has not had activity in the last 30 days.
+            If this issue is still valid, re-open the issue and let us know.
+
+            // [stale-action-closed]
+
+          stale-pr-label: stale
+          days-before-pr-stale: 45
+          days-before-pr-close: 30
+          exempt-pr-labels: bug,awaiting review,breaking_change,in progress,on hold
+
+          stale-pr-message: >
+            Thank you for your contribution!
+
+            This pull request has been automatically marked as stale because it has not had
+            activity in the last 45 days. It will be closed in 30 days if no further activity occurs.
+            Please feel free to give a status update now, or re-open when it's ready.
+
+            For maintainers: Please label with `bug`, `awaiting review`, `breaking_change`, `in progress`, or `on hold`
+            to prevent the issue from being re-flagged.
+
+          close-pr-message: >
+            Thank you for your contribution!
+
+            This pull request has been automatically closed because it has not had activity in the last 30 days.
+            Please feel free to give a status update now, ping for review, or re-open when it's ready.
+
+            // [stale-action-closed]

.github/workflows/unit_test.yml

@@ -20,10 +20,10 @@ jobs:
   test:
     runs-on: ubuntu-latest
 
-    container: qmkfm/base_container
+    container: qmkfm/qmk_cli
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
       with:
         submodules: recursive
     - name: Install dependencies

.gitignore

@@ -5,6 +5,10 @@
 .DS_Store
 ._*
 
+# Merge files
+*.orig
+*.rej
+
 # Build artifacts
 .clang_complete
 .build/
@@ -27,16 +31,11 @@ quantum/version.h
 *.uf2
 
 # Old-style QMK Makefiles
-/keyboards/*/Makefile
-/keyboards/*/*/Makefile
-/keyboards/*/*/*/Makefile
-/keyboards/*/*/*/*/Makefile
-/keyboards/*/*/*/*/*/Makefile
-/keyboards/*/keymaps/Makefile
-/keyboards/*/*/keymaps/Makefile
-/keyboards/*/*/*/keymaps/Makefile
-/keyboards/*/*/*/*/keymaps/Makefile
-/keyboards/*/*/*/*/*/keymaps/Makefile
+/keyboards/**/Makefile
+
+# kbfirmware....
+/keyboards/**/kb.h
+/keyboards/**/kb.c
 
 # Eclipse/PyCharm/Other IDE Settings
 *.iml
@@ -67,10 +66,12 @@ CMakeLists.txt
 .vscode/temp.sql
 tags
 
-# Ignore image files
+# Ignore image/font files
 *.gif
 *.jpg
 *.png
+*.ttf
+*.otf
 
 # Things Travis sees
 /.vs

data/mappings/info_config.json

@@ -7,6 +7,9 @@
     # to_json: Default `true`. Set to `false` to exclude this mapping from info.json
     # to_c: Default `true`. Set to `false` to exclude this mapping from config.h
     # warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places
+    # deprecated: Default `false`. Set to `true` to turn on warning when a value exists
+    # invalid: Default `false`. Set to `true` to generate errors when a value exists
+    # replace_with: use with a key marked deprecated or invalid to designate a replacement
     "AUDIO_VOICES": {"info_key": "audio.voices", "value_type": "bool"},
     "BACKLIGHT_BREATHING": {"info_key": "backlight.breathing", "value_type": "bool"},
     "BREATHING_PERIOD": {"info_key": "backlight.breathing_period", "value_type": "int"},
@@ -19,7 +22,6 @@
     "DEVICE_VER": {"info_key": "usb.device_ver", "value_type": "hex"},
     # TODO: Replace ^^^ with vvv
     #"DEVICE_VER": {"info_key": "usb.device_version", "value_type": "bcd_version"},
-    "DESCRIPTION": {"info_key": "keyboard_folder", "value_type": "str", "to_json": false},
     "DIODE_DIRECTION": {"info_key": "diode_direction"},
     "DOUBLE_TAP_SHIFT_TURNS_ON_CAPS_WORD": {"info_key": "caps_word.double_tap_shift_turns_on", "value_type": "bool"},
     "FORCE_NKRO": {"info_key": "usb.force_nkro", "value_type": "bool"},
@@ -102,4 +104,11 @@
     "USB_MAX_POWER_CONSUMPTION": {"info_key": "usb.max_power", "value_type": "int"},
     "USB_POLLING_INTERVAL_MS": {"info_key": "usb.polling_interval", "value_type": "int"},
     "USB_SUSPEND_WAKEUP_DELAY": {"info_key": "usb.suspend_wakeup_delay", "value_type": "int"},
+
+    # Items we want flagged in lint
+    "NO_ACTION_MACRO": {"info_key": "_invalid.no_action_macro", "invalid": true},
+    "NO_ACTION_FUNCTION": {"info_key": "_invalid.no_action_function", "invalid": true},
+    "DESCRIPTION": {"info_key": "_invalid.usb_description", "invalid": true},
+    "DEBOUNCING_DELAY": {"info_key": "_invalid.debouncing_delay", "invalid": true, replace_with: "DEBOUNCE"},
+    "PREVENT_STUCK_MODIFIERS": {"info_key": "_invalid.prevent_stuck_mods", "invalid": true},
 }

data/mappings/info_rules.json

@@ -7,6 +7,9 @@
     # to_json: Default `true`. Set to `false` to exclude this mapping from info.json
     # to_c: Default `true`. Set to `false` to exclude this mapping from rules.mk
     # warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places
+    # deprecated: Default `false`. Set to `true` to turn on warning when a value exists
+    # invalid: Default `false`. Set to `true` to generate errors when a value exists
+    # replace_with: use with a key marked deprecated or invalid to designate a replacement
     "BOARD": {"info_key": "board"},
     "BOOTLOADER": {"info_key": "bootloader", "warn_duplicate": false},
     "BLUETOOTH": {"info_key": "bluetooth.driver"},
@@ -24,5 +27,10 @@
     "SECURE_ENABLE": {"info_key": "secure.enabled", "value_type": "bool"},
     "SPLIT_KEYBOARD": {"info_key": "split.enabled", "value_type": "bool"},
     "SPLIT_TRANSPORT": {"info_key": "split.transport.protocol", "to_c": false},
-    "WAIT_FOR_USB": {"info_key": "usb.wait_for", "value_type": "bool"}
+    "WAIT_FOR_USB": {"info_key": "usb.wait_for", "value_type": "bool"},
+
+    # Items we want flagged in lint
+    "CTPC": {"info_key": "_deprecated.ctpc", "deprecated": true, "replace_with": "CONVERT_TO=proton_c"},
+    "CONVERT_TO_PROTON_C": {"info_key": "_deprecated.ctpc", "deprecated": true, "replace_with": "CONVERT_TO=proton_c"},
+    "VIAL_ENABLE": {"info_key": "_invalid.vial", "invalid": true},
 }

data/schemas/keyboard.jsonschema

@@ -145,7 +145,10 @@
                             "type": "object",
                             "additionalProperties": false,
                             "properties": {
-                                "label": {"type": "string"},
+                                "label": {
+                                    "type": "string",
+                                    "pattern": "^[^\\n]*$"
+                                },
                                 "matrix": {
                                     "type": "array",
                                     "minItems": 2,

docs/_summary.md

@@ -4,6 +4,7 @@
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Getting Help/Support](support.md)
+  * [Building With GitHub Userspace](newbs_building_firmware_workflow.md)
   * [Other Resources](newbs_learn_more_resources.md)
   * [Syllabus](syllabus.md)
 
@@ -84,6 +85,7 @@
     * [One Shot Keys](one_shot_keys.md)
     * [Pointing Device](feature_pointing_device.md)
     * [Raw HID](feature_rawhid.md)
+    * [Secure](feature_secure.md)
     * [Sequencer](feature_sequencer.md)
     * [Swap Hands](feature_swap_hands.md)
     * [Tap Dance](feature_tap_dance.md)
@@ -165,6 +167,7 @@
     * Arm/ChibiOS
       * [Selecting an MCU](platformdev_selecting_arm_mcu.md)
       * [Early initialization](platformdev_chibios_earlyinit.md)
+      * [WeAct Blackpill F411](platformdev_blackpill_f411.md)
 
   * QMK Reference
     * [Contributing to QMK](contributing.md)

docs/audio_driver.md

@@ -113,15 +113,17 @@ Additionally, in the board config, you'll want to make changes to enable the DAC
 
 ### DAC Config
 
-| Define                           | Defaults                   | Description                                                --------------------------------------------------------------------------------------------- |
+| Define                           | Defaults                   | Description                                                                                                                                                           |
+| -------------------------------- | -------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
 | `AUDIO_DAC_SAMPLE_MAX`           | `4095U`                    | Highest value allowed. Lower value means lower volume. And 4095U is the upper limit, since this is limited to a 12 bit value. Only effects non-pregenerated samples.  |
-| `AUDIO_DAC_OFF_VALUE`            | `AUDIO_DAC_SAMPLE_MAX / 2` | The value of the DAC when notplaying anything. Some setups may require a high (`AUDIO_DAC_SAMPLE_MAX`) or low (`0`) value here.                                        |
+| `AUDIO_DAC_OFF_VALUE`            | `AUDIO_DAC_SAMPLE_MAX / 2` | The value of the DAC when notplaying anything. Some setups may require a high (`AUDIO_DAC_SAMPLE_MAX`) or low (`0`) value here.                                       |
 | `AUDIO_MAX_SIMULTANEOUS_TONES`   | __see next table__         | The number of tones that can be played simultaneously.  A value that is too high may freeze the controller or glitch out when too many tones are being played.        |
-| `AUDIO_DAC_SAMPLE_RATE`          | __see next table__         | Effective bit rate of the DAC (in hertz), higher limits simultaneous tones, and lower sacrifices quality.                                                          |
+| `AUDIO_DAC_SAMPLE_RATE`          | __see next table__         | Effective bit rate of the DAC (in hertz), higher limits simultaneous tones, and lower sacrifices quality.                                                             |
 
 There are a number of predefined quality settings that you can use, with "sane minimum" being the default.  You can use custom values by simply defining the sample rate and number of simultaneous tones, instead of using one of the listed presets. 
 
 | Define                            | Sample Rate | Simultaneous tones  |
+| --------------------------------- | ----------- | ------------------- |
 | `AUDIO_DAC_QUALITY_VERY_LOW`      | `11025U`    | `8`                 |
 | `AUDIO_DAC_QUALITY_LOW`           | `22040U`    | `4`                 |
 | `AUDIO_DAC_QUALITY_HIGH`          | `44100U`    | `2`                 |

docs/breaking_changes.md

@@ -47,28 +47,11 @@ Criteria for acceptance:
     * This should be in Markdown format, with a name in the format `PR12345.md`, substituting the digits for your PR's ID.
     * One strong recommendation that the ChangeLog document matches the PR description on GitHub, so as to ensure traceability.
 
-# Checklists
+## Checklists
 
 This section documents various processes we use when running the Breaking Changes process.
 
-## Creating the `develop` branch
-
-This happens immediately after the previous `develop` branch is merged.
-
-* `qmk_firmware` git commands
-    * [ ] `git checkout master`
-    * [ ] `git pull --ff-only`
-    * [ ] `git checkout -b develop`
-    * [ ] Edit `readme.md`
-        * [ ] Add a big notice at the top that this is a testing branch.
-        * [ ] Include a link to this document
-    * [ ] `git commit -m 'Branch point for <DATE> Breaking Change'`
-    * [ ] `git tag breakpoint_<YYYY>_<MM>_<DD>`
-    * [ ] `git tag <next_version>` # Prevent the breakpoint tag from confusing version incrementing
-    * [ ] `git push upstream develop`
-    * [ ] `git push --tags`
-
-## 4 Weeks Before Merge
+### 4 Weeks Before Merge
 
 * `develop` is now closed to new PR's, only fixes for current PR's may be merged
 * Post call for testers
@@ -76,7 +59,7 @@ This happens immediately after the previous `develop` branch is merged.
     * [ ] GitHub PR
     * [ ] https://reddit.com/r/olkb
 
-## 2 Weeks Before Merge
+### 2 Weeks Before Merge
 
 * `develop` is now closed to existing PR merges, only bugfixes for previous merges may be included
 * Post call for testers
@@ -84,21 +67,21 @@ This happens immediately after the previous `develop` branch is merged.
     * [ ] GitHub PR
     * [ ] https://reddit.com/r/olkb
 
-## 1 Week Before Merge
+### 1 Week Before Merge
 
 * Announce that master will be closed from <2 Days Before> to <Day of Merge>
     * [ ] Discord
     * [ ] GitHub PR
     * [ ] https://reddit.com/r/olkb
 
-## 2 Days Before Merge
+### 2 Days Before Merge
 
 * Announce that master is closed for 2 days
     * [ ] Discord
     * [ ] GitHub PR
     * [ ] https://reddit.com/r/olkb
 
-## Day Of Merge
+### Day Of Merge
 
 * `qmk_firmware` git commands
     * [ ] `git checkout develop`
@@ -115,8 +98,39 @@ This happens immediately after the previous `develop` branch is merged.
     * [ ] `git checkout master`
     * [ ] `git pull --ff-only`
     * [ ] `git merge --no-ff develop`
+    * [ ] `git tag <next_version>` # Prevent the breakpoint tag from confusing version incrementing
+    * [ ] `git push upstream <next_version>`
     * [ ] `git push upstream master`
 
 ## Post-merge operations
 
+### Updating the `develop` branch
+
+This happens immediately after the previous `develop` branch is merged to `master`.
+
+* `qmk_firmware` git commands
+    * [ ] `git checkout master`
+    * [ ] `git pull --ff-only`
+    * [ ] `git checkout develop`
+    * [ ] `git pull --ff-only`
+    * [ ] `git merge --no-ff master`
+    * [ ] Edit `readme.md`
+        * [ ] Add a big notice at the top that this is a testing branch.
+        * [ ] Include a link to this document
+    * [ ] `git commit -m 'Branch point for <DATE> Breaking Change'`
+    * [ ] `git tag breakpoint_<YYYY>_<MM>_<DD>`
+    * [ ] `git push upstream breakpoint_<YYYY>_<MM>_<DD>`
+    
+* All submodules under `lib` now need to be checked against their QMK-based forks:
+    * [ ] `git submodule foreach git log -n1`
+    * [ ] Validate each submodule SHA1 matches the qmk fork, e.g. for ChibiOS:
+        * Go to [qmk/ChibiOS](https://github.com/qmk/ChibiOS)
+        * Compare the commit hash in the above output to the commit hash in the repository
+        * If there's a mismatch:
+            * [ ] `cd lib/chibios`
+            * [ ] `git fetch --all`
+            * [ ] `git checkout master`
+            * [ ] `git reset --hard <commit hash>`
+            * [ ] `git push origin master --force-with-lease`
+
 * (Optional) [update ChibiOS + ChibiOS-Contrib on `develop`](chibios_upgrade_instructions.md)

docs/cli_tab_complete.md

@@ -14,6 +14,10 @@ Add this to the end of your `.profile` or `.bashrc`:
 
 If you put `qmk_firmware` into another location you will need to adjust this path.
 
+Zsh users will need to load `bashcompinit`. The following can be added to `~/.zshrc` file:
+
+    autoload -Uz bashcompinit && bashcompinit
+
 ### System Wide Symlink
 
 If you want the tab completion available to all users of the system you can add a symlink to the `qmk_tab_complete.sh` script:

docs/compatible_microcontrollers.md

@@ -2,6 +2,8 @@
 
 QMK runs on any USB-capable AVR or ARM microcontroller with enough flash space - generally 32kB+ for AVR, and 64kB+ for ARM. With significant disabling of features, QMK may *just* squeeze into 16kB AVR MCUs.
 
+Features within QMK may or may not be compatible with every microcontroller.
+
 ## Atmel AVR
 
 The following use [LUFA](https://www.fourwalledcubicle.com/LUFA.php) as the USB stack:

docs/feature_advanced_keycodes.md

@@ -39,7 +39,7 @@ In practice, this means that you can check whether a given modifier is active wi
 
 To check that *only* a specific set of mods is active at a time, AND the modifier state and your desired mod mask as explained above and compare the result to the mod mask itself: `get_mods() & <mod mask> == <mod mask>`.
 
-For example, let's say you want to trigger a piece of custom code if one-shot left control and one-shot left shift are on but every other one-shot mods are off. To do so, you can compose the desired mod mask by combining the mod bits for left control and shift with `(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LSFT))` and then plug it in: `get_oneshot_mods & (MOD_BIT(KC_LCTL) | MOD_BIT(KC_LSFT)) == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_LSFT))`. Using `MOD_MASK_CS` instead for the mod bitmask would have forced you to press four modifier keys (both versions of control and shift) to fulfill the condition.
+For example, let's say you want to trigger a piece of custom code if one-shot left control and one-shot left shift are on but every other one-shot mods are off. To do so, you can compose the desired mod mask by combining the mod bits for left control and shift with `(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LSFT))` and then plug it in: `get_oneshot_mods() & (MOD_BIT(KC_LCTL) | MOD_BIT(KC_LSFT)) == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_LSFT))`. Using `MOD_MASK_CS` instead for the mod bitmask would have forced you to press four modifier keys (both versions of control and shift) to fulfill the condition.
 
 The full list of mod masks is as follows:
 

docs/feature_midi.md

@@ -10,6 +10,10 @@ MIDI_ENABLE = yes
 
 There are two MIDI systems in QMK: basic and advanced. With basic MIDI you will only be able to send Note On and Note Off messages using the note keycodes, meaning that keycodes like `MI_OCTU` and `MI_OCTD` will not work. Advanced MIDI allows you to do things like octave shifts, channel changes, velocity changes, modulation, and more.
 
+### Caveats
+
+MIDI requires 2 USB endpoints and as such may not work on some hardware such as V-USB controllers.
+
 ### Basic MIDI
 
 To enable basic MIDI, add the following to your `config.h`:

docs/feature_rgb_matrix.md

@@ -777,6 +777,7 @@ These are defined in [`color.h`](https://github.com/qmk/qmk_firmware/blob/master
 #define RGB_MATRIX_DISABLE_KEYCODES // disables control of rgb matrix by keycodes (must use code functions to control the feature)
 #define RGB_MATRIX_SPLIT { X, Y } 	// (Optional) For split keyboards, the number of LEDs connected on each half. X = left, Y = Right.
                               		// If RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR
+#define RGB_TRIGGER_ON_KEYDOWN      // Triggers RGB keypress events on key down. This makes RGB control feel more responsive. This may cause RGB to not function properly on some boards
 ```
 
 ## EEPROM storage :id=eeprom-storage

docs/feature_secure.md

@@ -0,0 +1,54 @@
+# Secure
+
+The secure feature aims to prevent unwanted interaction without user intervention.
+
+?> Secure does **not** currently implement encryption/decryption/etc and should not be a replacement where a strong hardware/software based solution is required.
+
+### Unlock sequence
+
+To unlock, the user must perform a set of actions. This can optionally be configured to be multiple keys.
+
+* While unlocking all keyboard input is ignored
+* Incorrect attempts will revert back to the previously locked state
+
+### Automatic Locking
+
+Once unlocked, the keyboard will revert back to a locked state after the configured timeout.
+The timeout can be refreshed by using the `secure_activity_event` function, for example from one of the various [hooks](custom_quantum_functions.md).
+
+## Usage
+
+Add the following to your `rules.mk`:
+
+```make
+SECURE_ENABLE = yes
+```
+
+## Keycodes
+
+| Key              | Description                                                                    |
+|------------------|--------------------------------------------------------------------------------|
+| `SECURE_LOCK`    | Revert back to a locked state                                                  |
+| `SECURE_UNLOCK`  | Forces unlock without performing a unlock sequence                             |
+| `SECURE_TOGGLE`  | Toggle directly between locked and unlock without performing a unlock sequence |
+| `SECURE_REQUEST` | Request that user perform the unlock sequence                                  |
+
+## Configuration
+
+| Define                  | Default        | Description                                                                     |
+|-------------------------|----------------|---------------------------------------------------------------------------------|
+|`SECURE_UNLOCK_TIMEOUT`  | `5000`         | Timeout for the user to perform the configured unlock sequence - `0` to disable |
+|`SECURE_IDLE_TIMEOUT`    | `60000`        | Timeout while unlocked before returning to locked - `0` to disable              |
+|`SECURE_UNLOCK_SEQUENCE` | `{ { 0, 0 } }` | Array of matrix locations describing a sequential sequence of keypresses        |
+
+## Functions
+
+| Function                  | Description                                                                |
+|---------------------------|----------------------------------------------------------------------------|
+| `secure_is_locked()`      | Check if the device is currently locked                                    |
+| `secure_is_unlocking()`   | Check if an unlock sequence is currently in progress                       |
+| `secure_is_unlocked()`    | Check if the device is currently unlocked                                  |
+| `secure_lock()`           | Lock down the device                                                       |
+| `secure_unlock()`         | Force unlock the device - bypasses user unlock sequence                    |
+| `secure_request_unlock()` | Begin listening for an unlock sequence                                     |
+| `secure_activity_event()` | Flag that user activity has happened and the device should remain unlocked |

docs/feature_split_keyboard.md

@@ -10,6 +10,8 @@ For this, we will mostly be talking about the generic implementation used by the
 
 !> ARM split supports most QMK subsystems when using the 'serial' and 'serial_usart' drivers. I2C slave is currently unsupported.
 
+!> Both sides must use the same MCU family, for eg two Pro Micro-compatible controllers or two Blackpills. Currently, mixing AVR and ARM is not possible as ARM vs AVR uses different method for serial communication, and are not compatible. Moreover Blackpill's uses 3.3v logic, and atmega32u4 uses 5v logic.
+
 ## Compatibility Overview
 
 | Transport                    | AVR                | ARM                |

docs/flashing.md

@@ -266,7 +266,7 @@ Flashing sequence:
 ### `make` Targets
 
 * `:dfu-util`: Waits until an STM32 bootloader device is available, and then flashes the firmware.
-* `:dfu-util-split-left` and `:dfu-util-split-right`: Flashes the firmware as with `:avrdude`, but also sets the handedness setting in EEPROM. This is ideal for Proton-C-based split keyboards.
+* `:dfu-util-split-left` and `:dfu-util-split-right`: Flashes the firmware as with `:dfu-util`, but also sets the handedness setting in EEPROM. This is ideal for Proton-C-based split keyboards.
 * `:st-link-cli`: Allows you to flash the firmware via the ST-Link CLI utility, rather than dfu-util. Requires an ST-Link dongle.
 * `:st-flash`: Allows you to flash the firmware via the `st-flash` utility from [STLink Tools](https://github.com/stlink-org/stlink), rather than dfu-util. Requires an ST-Link dongle.
 

docs/how_keyboards_work.md

@@ -35,7 +35,7 @@ USB for a given key.
 
 ## 3. What the Event Input/Kernel Does
 
-The *scancode* is mapped to a *keycode* dependent on the keyboard [60-keyboard.hwdb at Master](https://github.com/systemd/systemd/blob/master/hwdb.d/60-keyboard.hwdb). Without this mapping, the operating system will not receive a valid keycode and will be unable to do anything useful with that key press.
+The *scancode* is mapped to a *keycode* dependent on the keyboard [60-keyboard.hwdb at Main](https://github.com/systemd/systemd/blob/main/hwdb.d/60-keyboard.hwdb). Without this mapping, the operating system will not receive a valid keycode and will be unable to do anything useful with that key press.
 
 ## 4. What the Operating System Does
 

docs/newbs_building_firmware_workflow.md

@@ -0,0 +1,189 @@
+# Building QMK with GitHub Userspace
+
+This is an intermediate QMK tutorial to setup an out-of-tree build environment with a personal GitHub repository. It avoids using a fork of the QMK firmware to store and build your keymap within its source tree. Keymap files will instead be stored in your own personal GitHub repository, in [Userspace](https://docs.qmk.fm/#/feature_userspace) format, and built with an action workflow. Unlike the [default tutorial](https://docs.qmk.fm/#/newbs), this guide requires some familiarity with using Git.
+
+?> **Is This Guide For Me?**<br>
+This is a lean setup to avoid space-consuming local build environment in your computer. Troubleshooting compile-time errors will be slower with commit uploads to GitHub for the compiler workflow.
+
+
+## Prerequisites
+
+The following are required to get started:
+
+* [GitHub Account](https://github.com/new)
+  * A working account is required to setup and host your repository for GitHub Actions to build QMK firmware.
+* [Text editor](newbs_learn_more_resources.md#text-editor-resources)
+  * You’ll need a program that can edit and save plain text files. The default editor that comes with many OS's does not save plain text files, so you'll need to make sure that whatever editor you chose does.
+* [Toolbox](https://github.com/qmk/qmk_toolbox)
+  * A graphical program for Windows and macOS that allows you to both program and debug your custom keyboard.
+
+
+## Environment Setup
+
+?> If you are familiar with using [github.dev](https://docs.github.com/en/codespaces/the-githubdev-web-based-editor), you can skip to [step 2](#_2-create-github-repository) and commit the code files that follows directly on GitHub using the web-based VSCode editor.
+
+### 1. Install Git
+
+A working Git client is required for your local operating system to commit and push changes to GitHub.
+
+<!-- tabs:start -->
+
+### ** Windows **
+
+QMK maintains a bundle of MSYS2, the CLI and all necessary dependencies including Git. Install [QMK MSYS](https://msys.qmk.fm/) with the latest release [here](https://github.com/qmk/qmk_distro_msys/releases/latest). Git will be part of the bundle.
+
+### ** macOS **
+
+Install Homebrew following the instructions on https://brew.sh. Git will be part of the bundle.
+
+### ** Linux/WSL **
+
+It's very likely that you already have Git installed. If not, use one of the following commands:
+
+* Debian / Ubuntu / Devuan: `sudo apt install -y git`
+* Fedora / Red Hat / CentOS: `sudo yum -y install git`
+* Arch / Manjaro: `sudo pacman --needed --noconfirm -S git`
+* Void: `sudo xbps-install -y git`
+* Solus: `sudo eopkg -y install git`
+* Sabayon: `sudo equo install dev-vcs/git`
+* Gentoo: `sudo emerge dev-vcs/git`
+
+<!-- tabs:end -->
+
+### 2. GitHub authentication
+
+If your GitHub account is not configured for [authenticated Git operations](https://github.blog/2020-12-15-token-authentication-requirements-for-git-operations/), you will need to setup at least one of the following:
+* [Personal access token](https://docs.github.com/en/authentication/keeping-your-account-and-data-secure/creating-a-personal-access-token)
+* [Connecting with SSH](https://docs.github.com/en/authentication/connecting-to-github-with-ssh)
+
+### 3. Create a repository
+
+You will need a personal GitHub repository to host your QMK code. Follow [this guide](https://docs.github.com/en/get-started/quickstart/create-a-repo#create-a-repository) to create one named `qmk_keymap`. Do not proceed to commit any files just yet.
+
+
+## Initial Code Commit
+
+### Create template files
+
+Run the following commands in your computer to create a folder with a few template files:
+```
+mkdir -p ~/qmk_keymap/.github/workflows
+touch ~/qmk_keymap/.github/workflows/build.yml
+touch ~/qmk_keymap/config.h
+echo "SRC += source.c" > ~/qmk_keymap/rules.mk
+echo "#include QMK_KEYBOARD_H" > ~/qmk_keymap/source.c
+```
+
+?> For Windows user running MSYS, those commands will create the folder `qmk_keymap/` and its content in the `C:\Users\<windows_username>\qmk_keymap\` path location.
+
+### Add a JSON keymap
+
+Visit the [QMK Configurator](https://config.qmk.fm/#/) to create a keymap file:
+
+1. Select your keyboard from the drop-down list (and choose a layout if required).
+2. Use your GitHub username for the **Keymap Name** field.
+3. Customise the key layout according to your preference.
+4. Select download next to **KEYMAP.JSON** and save the JSON file into the `~/qmk_keymap/` folder.
+
+### Add a GitHub Action workflow
+
+Open the file `~/qmk_keymap/.github/workflows/build.yml` with your favorite [text editor](newbs_learn_more_resources.md#text-editor-resources), paste the following workflow content, and save it:
+```yml
+name: Build QMK firmware
+on: [push, workflow_dispatch]
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: qmkfm/qmk_cli
+    strategy:
+      fail-fast: false
+      matrix:
+# List of keymap json files to build
+        file:
+        - username.json
+# End of json file list
+
+    steps:
+
+    - name: Checkout QMK
+      uses: actions/checkout@v3
+      with:
+        repository: qmk/qmk_firmware
+        submodules: recursive
+
+    - name: Checkout userspace
+      uses: actions/checkout@v3
+      with:
+        path: users/${{ github.actor }}
+
+    - name: Build firmware
+      run: qmk compile "users/${{ github.actor }}/${{ matrix.file }}"
+
+    - name: Archive firmware
+      uses: actions/upload-artifact@v3
+      continue-on-error: true
+      with:
+        name: ${{ matrix.file }}_${{ github.actor }}
+        path: |
+          *.hex
+          *.bin
+          *.uf2
+```
+Replace `username.json` with the JSON file name that was downloaded from [QMK Configurator](https://config.qmk.fm/#/) in the previous step.
+
+!> Do note that the `build.yml` file requires ***proper indentation*** for every line. Incorrect spacing will trigger workflow syntax errors.
+
+### Commit files to GitHub
+
+If you have completed all steps correctly, the folder `qmk_keymap/` will contain the following files:
+```
+|-- .github
+|   `-- workflows
+|       `-- build.yml
+|-- rules.mk
+|-- config.h
+|-- source.c
+|-- username.json
+```
+
+To commit and push them into GitHub, run the following commands (replacing `gh-username` with your GitHub user name):
+```
+cd ~/qmk_keymap
+git init
+git add -A
+git commit -m "Initial QMK keymap commit"
+git branch -M main
+git remote add origin https://github.com/gh-username/qmk_keymap.git
+git push -u origin main
+```
+?> Use your GitHub personal access token at the password prompt. If you have setup SSH access, replace `https://github.com/gh-username/qmk_keymap.git` with `git@github.com:gh-username/qmk_keymap.git` in the remote origin command above.
+
+### Review workflow output
+
+Files committed to GitHub in the previous step will automatically trigger the workflow to build the JSON file listed in `build.yml`. To review its output:
+1. Visit your "**qmk_keymap**" repository page on [GitHub](https://github.com/).
+2. Select **Actions** tab to display the "**Build QMK Firmware**" workflow.
+3. Select that workflow to display its run from the last commit.
+4. Successfully compiled firmware will be under the "**Artifacts**" section.
+5. If there are build errors, review the job log for details.
+
+Download and flash the firmware file into your keyboard using [QMK Toolbox](https://docs.qmk.fm/#/newbs_flashing?id=flashing-your-keyboard-with-qmk-toolbox).
+
+
+## Customising your keymap
+
+This setup and workflow relies on the QMK [Userspace](https://docs.qmk.fm/#/feature_userspace) feature. The build process will copy the QMK source codes and clone your repository into its `users/` folder in a container. You must adhere to the following guidelines when customising your keymaps:
+
+* Keymap layout files must be retained in JSON format and cannot be converted to `keymap.c`.
+* User callback and functions (e.g. `process_record_user()`) can be placed in the `source.c` file.
+* Multiple keymap JSON files can be built in the same workflow. List them under `matrix.file:`, e.g.:
+```yml
+        file:
+        - planck.json
+        - crkbd.json
+```
+* Code changes will require Git commit into GitHub to trigger the build workflow.
+
+
+?> See [GitHub Actions guide](https://docs.github.com/en/actions/learn-github-actions) to learn more about development workflow.

docs/newbs_flashing.md

@@ -108,6 +108,8 @@ However, this does rely on the bootloader being set by the keyboard. If this inf
 
 In this case, you'll have to fall back on specifying the bootloader. See the [Flashing Firmware](flashing.md) Guide for more details.
 
+!> If your bootloader is not detected by `qmk flash`, try running `qmk doctor` for suggestions on how to fix common problems.
+
 ## Test It Out!
 
 Congrats! Your custom firmware has been programmed to your keyboard and you're ready to test it out!

docs/newbs_getting_started.md

@@ -27,30 +27,24 @@ QMK maintains a Bundle of MSYS2, the CLI and all necessary dependencies. It also
 
 You will need to install [QMK MSYS](https://msys.qmk.fm/). The latest release is available [here](https://github.com/qmk/qmk_distro_msys/releases/latest).
 
-Alternatively, if you'd like to manually install MSYS2, the following section will walk you through the process.
-
 <details>
-  <summary>Manual Install</summary>
+  <summary>Advanced Users</summary>
 
-?> Ignore the following steps if you use `QMK MSYS`.
+!> <b style="font-size:150%">This process is not recommended for new users.</b>
+
+If you'd like to manually install MSYS2, the following sections will walk you through the process.
 
 #### Prerequisites
 
-You will need to install MSYS2, Git and Python. Follow the installation instructions on https://www.msys2.org.
-
-Once MSYS2 is installed, close any open MSYS terminals and open a new MinGW 64-bit terminal.
+You will need to install [MSYS2](https://www.msys2.org). Once installed, close any open MSYS terminals (purple icon) and open a new MinGW 64-bit terminal (blue icon) from the Start Menu.
 
 !> **NOTE:** The MinGW 64-bit terminal is *not* the same as the MSYS terminal that opens when installation is completed. Your prompt should say "MINGW64" in purple text, rather than "MSYS". See [this page](https://www.msys2.org/wiki/MSYS2-introduction/#subsystems) for more information on the differences.
 
-Then run the following command:
-
-    pacman --needed --noconfirm --disable-download-timeout -S git mingw-w64-x86_64-toolchain mingw-w64-x86_64-python3-pip mingw-w64-x86_64-python-pillow
-
 #### Installation
 
 Install the QMK CLI by running:
 
-    python3 -m pip install qmk
+    pacman --needed --noconfirm --disable-download-timeout -S git mingw-w64-x86_64-python-qmk
 
 </details>
 

docs/other_vscode.md

@@ -104,10 +104,8 @@ There are a number of extensions that you may want to install:
 * [Git Extension Pack](https://marketplace.visualstudio.com/items?itemName=donjayamanne.git-extension-pack) - 
 This installs a bunch of Git related tools that may make using Git with QMK Firmware easier.
 * [EditorConfig for VS Code](https://marketplace.visualstudio.com/items?itemName=EditorConfig.EditorConfig) - _[Optional]_ -  Helps to keep the code to the QMK Coding Conventions.
-* [Bracket Pair Colorizer 2](https://marketplace.visualstudio.com/items?itemName=CoenraadS.bracket-pair-colorizer-2) - _[Optional]_ - This color codes the brackets in your code, to make it easier to reference nested code.
 * [GitHub Markdown Preview](https://marketplace.visualstudio.com/items?itemName=bierner.github-markdown-preview) - _[Optional]_ - Makes the markdown preview in VS Code more like GitHub's.
 * [VS Live Share Extension Pack](https://marketplace.visualstudio.com/items?itemName=MS-vsliveshare.vsliveshare-pack) - _[Optional]_ - This extension allows somebody else to access your workspace (or you to access somebody else's workspace) and help out.  This is great if you're having issues and need some help from somebody.
-* [VIM Keymap](https://marketplace.visualstudio.com/items?itemName=GiuseppeCesarano.vim-keymap) - _[Optional]_ - For those that prefer VIM style keybindings. There are other options for this, too. 
 
 Restart once you've installed any extensions
 

docs/platformdev_blackpill_f411.md

@@ -0,0 +1,48 @@
+# WeAct Blackpill (STM32F411)
+
+The WeAct Blackpill is a popular choice for handwired boards, as it offers a powerful micro controller, USB Type C, a good number of pins to use, and a large amount of firmware space.  All for a ~$6 USD price tag. 
+
+* [WeAct GitHub for F411 Blackpill](https://github.com/WeActTC/MiniSTM32F4x1)
+  * Unfortunately, due to supply issues official WeAct F411 based blackpills may not be available.
+
+![Blackpill F411](https://i.imgur.com/nCgeolTh.png)
+
+
+## Pin Usage Limitations
+
+While the Blackpill is a great choice to use in your keyboard, there are a number of caveats in regards to using them.  The first is that a number of exposed pins cannot be used, or have special considerations/hardware tweaks that are required for proper opertion. 
+
+### Unusable pins
+* Pins `A11` and `A12` are not useable because they're used for USB connection, and cannot be shared.
+  * In theory, these pins can be used.  However, doing so may disable USB connectivity, outright, if used for anything other than a USB port
+* Pin `B2` is used by `BOOT1` and cannot be used, without causing problems. 
+* `VBAT` is not a usable pin.
+* `NRST` is not a usable pin.
+
+### Pins to be avoided
+* Pin `A9` is meant for VBUS Sense and should not be used, if it can be avoided.  It has an internal pull-down resesitor, which may cause issues with usage.  However, a pull-up resistor can work (~5.1k), but should be avoided.
+* Pin `A10` can be used, but should be avoided.  Any connection on this pin can prevent the bootloader from entering the proper mode for DFU flashing.  A pull-up resistor (~22k) on this pin fixes the bootloader issue. 
+
+### Shared Usage
+* Pin `A0` is shared with the User Key (button) on the controller.  It can be used. 
+* Pin `C13` is shared with the onboard LED indicator, and is connected to +3.3V.  This can be used, but may cause the LED to blink intermittently, depending on activity on the pin. 
+  * 
+* Pins `A4`, `A5`, `A6` and `A7` are used by the SOI8 footprint on the back of the controller, that can be used for either an SPI Flash chip, or an SPI EEPROM chip.  `A4` is the Chip Select pin, and cannot be shared.  However, `A5`, `A6`, and `A7` are the `SCK`, `MISO`, and `MOSI` pins, respectively, and can be shared with other SPI devices. 
+
+### Limited Usage
+* Pins `C13`, `C14`, and `C15` have limits on output current. They should be used only as input.   Eg, they should not be used for row pins in COL2ROW matrix configurations, but can be used as column pins.
+  * This is because the column pins (in COL2ROW) are pulled up (the pullup strength is independant of the current sourcing limitation) and the ROW is driven low and sinks current, then we check the state of the COLs to look for keypresses.
+
+* Pins `A0` and `B5` are not 5V tolerant, and should only be used with 3.3V compatible functionality. 
+
+## Additional Information
+
+### Bootloader issuse
+
+Due to the use of a 25MHz crystal, the controller may have issues entering the bootloader.  Heating up the controller can help with this issue. 
+
+Also, if pin `A10` is connected to anything at all, it needs to have a pullup resistor (see [Pins to be avoided](#pins-to-be-avoided), above)
+
+### Tiny UF2 Support
+
+There is [tinyuf2 support for the WeAct Blackpill](https://github.com/adafruit/tinyuf2/tree/master/ports/stm32f4/boards/stm32f411ce_blackpill).  Instructions on how to compile the bootloadr can be found [here](https://github.com/adafruit/tinyuf2#build-and-flash).  Setting `BOOTLOADER = tinyuf2` will enable support for this user bootloader, and the correct configuration to prevent it from being overwritten when flashing firmware. 

docs/pr_checklist.md

@@ -79,6 +79,9 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
     - `matrix_init_board()` etc. migrated to `keyboard_pre_init_kb()`, see: [keyboard_pre_init*](custom_quantum_functions.md?id=keyboard_pre_init_-function-documentation)
     - prefer `CUSTOM_MATRIX = lite` if custom matrix used, allows for standard debounce, see [custom matrix 'lite'](custom_matrix.md?id=lite)
     - prefer LED indicator [Configuration Options](feature_led_indicators.md?id=configuration-options) to custom `led_update_*()` implementations where possible
+    - Encoder support should not be hacked into the keymap here -- no `tap_code(dynamic_keymap_get_keycode())` or `action_exec()` hacks.  The [Encoder Map](feature_encoders.md?id=encoder-map) feature already supports the dynamic keymap feature (what power's VIA's "live keymap updates" capability).
+      - If support is absolutely necessary, it should be implemented exclusively at the keymap level, with none of the implementation bleeding into the keyboard level (no empty rows/columns, no encoder specific layouts, etc.), as those configurations can be redefined at the keymap level. Keymaps can then choose to use the `action_exec` hack. <!-- because people will complain, give them a way to implement it, in the meanwhile.  To be removed. -->
+      - [Request for official proper VIA support](https://github.com/the-via/app/issues/26)
 - `<keyboard>.h`
     - `#include "quantum.h"` appears at the top
     - `LAYOUT` macros should use standard definitions if applicable

docs/ref_functions.md

@@ -87,9 +87,13 @@ To configure the default layer sounds, you would want to define this in your `co
 
 ## Resetting the keyboard
 
-There is the `RESET` quantum keycode that you can use. But if you want to reset the board as part of a macro, rather than hitting a key separately, you can do that.
+There is the `QK_REBOOT` or `QK_RBT` quantum keycode that you can use. But if you want to reset the board as part of a macro, rather than hitting a key separately, you can do that.
 
-And to do so, add `reset_keyboard()` to your function or macro, and this will reset to bootloader.
+And to do so, add `soft_reset_keyboard()` to your function or macro.
+
+## Reset to bootloader
+
+To reset to the bootloader use `QK_BOOTLOADER` or `QK_BOOT` keycode or `reset_keyboard()` function.
 
 ## Wiping the EEPROM (Persistent Storage)
 

docs/reference_info_json.md

@@ -89,7 +89,7 @@ Example:
 
 Direct pins are when you connect one side of the switch to GND and the other side to a GPIO pin on your MCU. No diode is required, but there is a 1:1 mapping between switches and pins.
 
-When specifying direct pins you need to arrange them in nested arrays. The outer array consists of rows, while the inner array is a text string corresponding to a pin. You can use `null` to indicate an empty spot in the matrix.
+When specifying direct pins you need to arrange them in nested arrays. The outer array consists of rows, while the inner array uses text strings to identify the pins used in each row. You can use `null` to indicate an empty spot in the matrix.
 
 Example:
 
@@ -108,7 +108,58 @@ Example:
 }
 ```
 
-### RGB Lighting
+## Non-RGB LED Lighting
+
+This section controls basic 2-pin LEDs, which typically pass through keyswitches and are soldered into the PCB, or are placed in PCB sockets.
+### Backlight
+
+* `breathing`
+    * Enable backlight breathing, if supported
+* `breathing_period`
+    * The length of one backlight “breath” in seconds
+* `levels`
+    * The number of brightness levels (maximum 31, excluding off)
+* `pin`
+    * The pin that controls the backlight LED(s)
+
+Example:
+
+```json
+{
+    "backlight": {
+        "breathing": true,
+        "breathing_period": 5,
+        "levels": 15,
+        "pin": "B7"
+    }
+}
+```
+
+### LED Indicators
+
+Used for indicating Num Lock, Caps Lock, and Scroll Lock. May be soldered in-switch or in a dedicated area.
+
+* `num_lock`
+    * The pin that controls the `Num Lock` LED
+* `caps_lock`
+    * The pin that controls the `Caps Lock` LED
+* `scroll_lock`
+    * The pin that controls the `Scroll Lock` LED
+
+Example:
+
+```json
+{
+    "indicators": {
+        "num_lock": "B6",
+        "caps_lock": "D2",
+        "scroll_lock": "A3"
+    }
+}
+
+```
+
+## RGB Lighting
 
 This section controls the legacy WS2812 support in QMK. This should not be confused with the RGB Matrix feature, which can be used to control both WS2812 and ISSI RGB LEDs.
 
@@ -152,7 +203,7 @@ Example:
 }
 ```
 
-#### RGBLight Animations
+### RGBLight Animations
 
 The following animations can be enabled:
 
@@ -187,3 +238,25 @@ Example:
 ```
 
 The device version is a BCD (binary coded decimal) value, in the format `MMmr`, so the below value would look like `0x0100` in the generated code. This also means the maximum valid values for each part are `99.9.9`, despite it being a hexadecimal value under the hood.
+
+### Secure
+
+The following options can be configured:
+
+|Key               |Description                                                                      |
+|------------------|---------------------------------------------------------------------------------|
+|`unlock_sequence` | Timeout for the user to perform the configured unlock sequence - `0` to disable |
+|`unlock_timeout`  | Timeout while unlocked before returning to locked - `0` to disable              |
+|`idle_timeout`    | Array of matrix locations describing a sequential sequence of keypresses        |
+
+Example:
+
+```json
+{
+    "secure": {
+        "unlock_sequence": [ [0,0], [0,1] ],
+        "unlock_timeout": 5000,
+        "idle_timeout": 60000
+    }
+}
+```

docs/zh-cn/flashing.md

@@ -252,7 +252,7 @@ BOOTLOADER = stm32-dfu
 ### `make` 构建目标
 
 * `:dfu-util`: 每5秒检测一次直到发现可用的STM32 bootloader设备，然后进行固件刷写。
-* `:dfu-util-split-left` 和 `:dfu-util-split-right`: 同 `:avrdude` 一样会刷写固件，但额外地会设置手性设置到EEPROM中，对于基于Proton-C的分体式键盘这是理想的方法。
+* `:dfu-util-split-left` 和 `:dfu-util-split-right`: 同 `:dfu-util` 一样会刷写固件，但额外地会设置手性设置到EEPROM中，对于基于Proton-C的分体式键盘这是理想的方法。
 * `:st-link-cli`: 通过ST-Link CLI工具集而非dfu-util进行刷写，需要有ST-Link电子狗。
 * `:st-flash`: 通过[STLink工具](https://github.com/stlink-org/stlink)内的 `st-flash` 工具而非dfu-util进行刷写，需要有ST-Link电子狗。
 

drivers/led/aw20216.c

@@ -63,7 +63,7 @@ bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
 bool AW20216_write(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t* data, uint8_t len) {
     static uint8_t s_spi_transfer_buffer[2] = {0};
 
-    if (!spi_start(cs_pin, false, 0, AW_SPI_DIVISOR)) {
+    if (!spi_start(cs_pin, false, 3, AW_SPI_DIVISOR)) {
         spi_stop();
         return false;
     }

keyboards/0xcb/tutelpad/config.h

@@ -0,0 +1,89 @@
+/* Copyright 2022 ItsFiremanSam
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+/* Keyboard Matrix Assignments */
+#define DIRECT_PINS { \
+    { E6, D7, B1, B3 }, \
+    { B5, B4, B2, B6 } \
+}
+
+#define RGB_DI_PIN D3                   // LED data pin on controller
+#define RGBLED_NUM 4                    // Number of LEDs connected
+
+#define RGBLIGHT_HUE_STEP 10            // The number of steps to cycle through the hue by
+#define RGBLIGHT_SAT_STEP 17            // The number of steps to increment the saturation by
+#define RGBLIGHT_VAL_STEP 17            // The number of steps to increment the brightness by
+#define RGBLIGHT_LIMIT_VAL 255          // Max brightness level
+#define RGBLIGHT_SLEEP                  // RGB will switch off when host goes to sleep
+
+#define RGBLIGHT_EFFECT_BREATHING       // Enable all additional RGB animation modes
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+
+#define OLED_TIMEOUT 20000              // Turns off OLED after said amount of milliseconds
+#define OLED_BRIGHTNESS 128
+#define OLED_DISPLAY_128X64
+
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 1
+#define BOOTMAGIC_LITE_COLUMN 0

keyboards/0xcb/tutelpad/info.json

@@ -0,0 +1,26 @@
+{
+    "keyboard_name": "TutelPad",
+    "manufacturer": "ItsFiremanSam",
+    "url": "",
+    "maintainer": "ItsFiremanSam",
+    "usb": {
+        "vid": "0xCB00",
+        "pid": "0xF09F",
+        "device_version": "0.0.1"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label": "k03", "x": 0, "y": 0},
+                {"label": "k02", "x": 1, "y": 0},
+                {"label": "k01", "x": 2, "y": 0},
+                {"label": "k00", "x": 3, "y": 0},
+
+                {"label": "k13", "x": 0, "y": 1},
+                {"label": "k12", "x": 1, "y": 1},
+                {"label": "k11", "x": 2, "y": 1},
+                {"label": "k10", "x": 3, "y": 1}
+            ]
+        }
+    }
+}

keyboards/0xcb/tutelpad/keymaps/default/keymap.c

@@ -0,0 +1,29 @@
+/* Copyright 2022 ItsFiremanSam
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_1,    KC_2,    KC_3,    KC_4,
+        KC_5,    KC_6,    KC_7,    KC_8
+    )
+};

keyboards/0xcb/tutelpad/keymaps/via/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2022 ItsFiremanSam
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [0] = LAYOUT(
+        KC_1,    KC_2,           KC_3,           KC_4,
+        KC_5,    LT(1, KC_6),    LT(1, KC_7),    LT(1, KC_8)
+    ),
+
+    [1] = LAYOUT(
+        _______,    _______,    _______,    _______,
+        _______,    _______,    _______,    _______
+    ),
+    
+    [2] = LAYOUT(
+        _______,    _______,    _______,    _______,
+        _______,    _______,    _______,    _______
+    ),
+    
+    [3] = LAYOUT(
+        _______,    _______,    _______,    _______,
+        _______,    _______,    _______,    _______
+    ),
+};

keyboards/0xcb/tutelpad/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/0xcb/tutelpad/readme.md

@@ -0,0 +1,19 @@
+# TutelPad macropad
+
+* Keyboard Maintainer: [ItsFiremanSam](https://github.com/ItsFiremanSam)
+* Hardware Supported: [TutelPad GitHub](https://github.com/0xCB-dev/0xCB-TutelPad)
+* Hardware Availability: [KeebSupply](https://keeb.supply/)
+
+## Bootloader
+
+You can enter the bootloader by pressing the reset switch on the side while the keyboard is plugged in. You can also short the GND and RST pads on the controller.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 0xcb/tutelpad:default
+
+Flashing example for this keyboard:
+
+    make 0xcb/tutelpad:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/0xcb/tutelpad/rules.mk

@@ -0,0 +1,21 @@
+## MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration 
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+OLED_ENABLE = yes
+OLED_DRIVER = SSD1306

keyboards/0xcb/tutelpad/tutelpad.c

@@ -0,0 +1,106 @@
+/* Copyright 2022 ItsFiremanSam
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "tutelpad.h"
+
+#ifdef OLED_ENABLE
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_180;
+}
+
+static void render_logo(void) {
+    static const char PROGMEM tutel[] = {
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 
+        0x0f, 0x0f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0xf0, 0xf0, 0xf0, 0xf0, 0x00, 0x00, 0x00, 0x00, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 
+        0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 
+        0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x0f, 0x0f, 0x0f, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x0f, 0x0f, 0x0f, 0x0f, 0xf0, 0xf0, 0xf0, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xff, 0xff, 0xff, 0xff, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 
+        0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 
+        0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 
+        0x0f, 0x0f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 
+        0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 
+        0xff, 0xff, 0xff, 0xff, 0x0f, 0x0f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 
+        0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 
+        0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0xff, 0xff, 0xff, 0xff, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 0xf0, 0xf0, 0xf0, 0xf0, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 
+        0xf0, 0xf0, 0xf0, 0xf0, 0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+
+oled_write_raw_P(tutel, sizeof(tutel));
+}
+
+bool oled_task_kb(void) {
+    if (!oled_task_user()) {
+        return false;
+    }
+
+    render_logo();
+
+    return false;
+}
+
+#endif

keyboards/0xcb/tutelpad/tutelpad.h

@@ -0,0 +1,35 @@
+/* Copyright 2022 ItsFiremanSam
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+      k10,  k11,  k12,  k13  \
+) { \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }  \
+}

keyboards/1k/config.h

@@ -17,13 +17,6 @@
 
 #include "config_common.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID  0x0009
-#define PRODUCT_ID 0x0001
-#define DEVICE_VER 0x0001
-#define MANUFACTURER MakotoKurauchi
-#define PRODUCT 1K
-
 /* matrix size */
 #define MATRIX_ROWS 1
 #define MATRIX_COLS 1

keyboards/1k/info.json

@@ -1,7 +1,13 @@
 {
-  "keyboard_name": "1k",
+  "keyboard_name": "1K",
+  "manufacturer": "MakotoKurauchi",
   "url": "",
   "maintainer": "MakotoKurauchi",
+  "usb": {
+    "vid": "0x0009",
+    "pid": "0x0001",
+    "device_version": "0.0.1"
+  },
   "layouts": {
     "LAYOUT_ortho_1x1": {
       "layout": [

keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md

@@ -1,11 +0,0 @@
-# Gherkin Layout
-This is my gherkin layout.
-It is used as a game pad, and key layout is inspired by spare keys I had lying around.
-The firmware is very simple, and only includes one layer keymap, and RGB effects.
-
-# Flashing
-The following command should be used from the main qmk directory.
-```
-make gherkin:bbaserdem
-sudo avrdude -p atmgea34u4 -P `ls /dev/ttyACM*` -c avr109 -U flash:.build/gherkin_bbaserdem.hex
-```

keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h

@@ -1,9 +0,0 @@
-#pragma once
-
-#define RGB_DI_PIN F6
-#define RGBLED_NUM 10
-#define RGBLIGHT_ANIMATIONS
-#ifdef BACKLIGHT_LEVELS
-#undef BACKLIGHT_LEVELS
-#endif
-#define BACKLIGHT_LEVELS 3

keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c

@@ -1,36 +0,0 @@
-// This is a game-pad gherkin layout with RGB and LED lights
-
-#include QMK_KEYBOARD_H
-
-backlight_config_t backlight_config;
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Game pad
- * ,-----------------------------------------------------------.
- * | Esc |  1  |  2  |  3  |  4  |  5  |  6  | Ctl | Alt |  ~  |
- * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
- * | Tab |  Q  |  W  |  E  |  R  |  T  | |^| |  ;  |  '  |  /  |
- * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
- * | Shf |  A  |  S  |  D  |  F  | <-- | |v| | --> |  ,  |  .  |
- * `-----------------------------------------------------------'
- */
-    LAYOUT_ortho_3x10(
-        KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5,    KC_6,    KC_LCTRL, KC_LALT,  KC_GRAVE,
-        KC_TAB,    KC_Q, KC_W, KC_E, KC_R, KC_T,    KC_UP,   KC_SCLN,  KC_QUOTE, KC_SLASH,
-        KC_LSHIFT, KC_A, KC_S, KC_D, KC_F, KC_LEFT, KC_DOWN, KC_RIGHT, KC_COMMA, KC_DOT
-    )
-};
-
-void matrix_init_user(void) {
-    // Set LED's to max
-    _delay_us(300);
-    backlight_config.level = 2;
-    backlight_config.enable = 1;
-    eeconfig_update_backlight(backlight_config.raw);
-    backlight_set(backlight_config.level);
-    // Set RGB to rainbow mood light
-    rgblight_enable();
-    rgblight_mode(1);
-    rgblight_sethsv(120,255,255);
-    rgblight_mode(6);
-}

keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk

@@ -1,13 +0,0 @@
-USER_NAME := bbaserdem-nouserspace
-
-STENO_ENABLE = no      # Additional protocols for Stenography(+1700), requires VIRTSER
-MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no   # Audio control and System control(+450)
-CONSOLE_ENABLE = no    # Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-AUDIO_ENABLE = no 	   # Enable audio output from keyboard
-
-NKRO_ENABLE = yes      # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes  # Enable RBG light strips
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality

keyboards/40percentclub/nano/keymaps/drashna/keymap.c

@@ -23,8 +23,8 @@
 // clang-format off
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_QWERTY] = LAYOUT(
-     KC_VOLU, KC_MPLY, KC_MPRV, RESET,
-     KC_VOLD, KC_MUTE, KC_MNXT, RESET
+     KC_VOLU, KC_MPLY, KC_MPRV, QK_BOOT,
+     KC_VOLD, KC_MUTE, KC_MNXT, QK_BOOT
   ),
 
 };

keyboards/4pplet/perk60_iso/info.json

@@ -0,0 +1,10 @@
+{
+    "keyboard_name": "Perk60 ISO Rev A",
+    "url": "",
+    "maintainer": "4pplet",
+    "layouts": {
+        "LAYOUT_60_iso": {
+            "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/4pplet/perk60_iso/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/*
+Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+// main layer
+[0] = LAYOUT_60_iso(
+  KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,       KC_6,      KC_7,      KC_8,      KC_9,      KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+  KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,       KC_Y,      KC_U,      KC_I,      KC_O,      KC_P,    KC_LBRC, KC_RBRC,
+  KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,       KC_H,      KC_J,      KC_K,      KC_L,      KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+  KC_LSFT,  KC_NUBS,  KC_Z,     KC_X,     KC_C,     KC_V,       KC_B,      KC_N,      KC_M,      KC_COMM,   KC_DOT,  KC_SLSH, KC_RSFT,
+  KC_LCTL,  KC_LGUI,  KC_LALT,                                  KC_SPC,                                     KC_RALT,   KC_RGUI, MO(1), KC_RCTL),
+  // basic function layer
+[1] = LAYOUT_60_iso(
+  QK_BOOT,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,     KC_F6,      KC_F7,          KC_F8,              KC_F9,      KC_F10,  KC_F11,   KC_F12,  KC_DEL,
+  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,        KC_TRNS,            KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,        KC_TRNS,            KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_SAI,   RGB_VAI,   RGB_SPI,    RGB_MODE_PLAIN, RGB_MODE_BREATHE,   RGB_MODE_RAINBOW,    KC_TRNS, KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,                       KC_TRNS,                                                   KC_TRNS,  KC_TRNS,  KC_TRNS,    KC_TRNS)
+};

keyboards/4pplet/perk60_iso/keymaps/via/keymap.c

@@ -0,0 +1,49 @@
+/*
+Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+// main layer// main layer
+[0] = LAYOUT_60_iso(
+  KC_ESC,   KC_1,    KC_2,     KC_3,     KC_4,     KC_5,       KC_6,      KC_7,      KC_8,      KC_9,       KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+  KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,       KC_Y,      KC_U,      KC_I,      KC_O,       KC_P,    KC_LBRC, KC_RBRC,
+  KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,       KC_H,      KC_J,      KC_K,      KC_L,       KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+  KC_LSFT,  KC_NUBS,  KC_Z,     KC_X,     KC_C,     KC_V,       KC_B,      KC_N,      KC_M,      KC_COMM,    KC_DOT,  KC_SLSH, KC_RSFT,
+  KC_LCTL,  KC_LGUI,  KC_LALT,                           KC_SPC,                                 KC_RALT,      KC_RGUI, MO(1), KC_RCTL),
+  // basic function layer
+[1] = LAYOUT_60_iso(
+  QK_BOOT,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,     KC_F6,      KC_F7,          KC_F8,              KC_F9,      KC_F10,  KC_F11,   KC_F12,  KC_DEL,
+  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,        KC_TRNS,            KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,        KC_TRNS,            KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_SAI,   RGB_VAI,   RGB_SPI,    RGB_MODE_PLAIN, RGB_MODE_BREATHE,   RGB_MODE_RAINBOW,    KC_TRNS, KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,                       KC_TRNS,                                                   KC_TRNS,  KC_TRNS,  KC_TRNS,    KC_TRNS),
+
+[2] = LAYOUT_60_iso(
+  KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,      KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,                        KC_TRNS,                            KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS),
+
+[3] = LAYOUT_60_iso(
+  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,      KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,                        KC_TRNS,                            KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS)
+};

keyboards/4pplet/perk60_iso/readme.md

@@ -0,0 +1,17 @@
+# Perk60 ISO Rev A
+
+* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
+* Hardware Supported: Perk60 ISO Rev A
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 4pplet/perk60_iso/rev_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+How to enter bootloader (DFU):
+* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
+* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
+
+Alternative option if the firmware is already pre-flashed:
+* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.

keyboards/4pplet/perk60_iso/rev_a/config.h

@@ -0,0 +1,79 @@
+/*
+Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4444
+#define PRODUCT_ID      0x0009
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    4pplet
+#define PRODUCT         Perk60 ISO Rev A
+
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+#define MATRIX_COL_PINS { A1, B12, B14, A2, A0, A3, A4}
+#define MATRIX_ROW_PINS { C14, C13, B5, B4, B8, A15, B3, B9, A5, A7}
+#define DIODE_DIRECTION COL2ROW
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+#define DRIVER_ADDR_1 0b1010000
+#define DRIVER_COUNT 1
+#define DRIVER_LED_TOTAL 62
+#define ISSI_PWM_FREQUENCY 0b010
+
+#define STM32_HSECLK 8000000
+
+#define RGB_MATRIX_STARTUP_VAL 80
+#define RGB_MATRIX_KEYPRESSES
+
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+#define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_BREATHING
+#define ENABLE_RGB_MATRIX_CYCLE_ALL
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#define ENABLE_RGB_MATRIX_DUAL_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define ENABLE_RGB_MATRIX_RAINDROPS
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#define ENABLE_RGB_MATRIX_SPLASH
+#define ENABLE_RGB_MATRIX_SOLID_SPLASH
+

keyboards/4pplet/perk60_iso/rev_a/halconf.h

@@ -0,0 +1,25 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#define HAL_USE_PWM FALSE
+
+#define HAL_USE_SPI FALSE
+
+#include_next <halconf.h>

keyboards/4pplet/perk60_iso/rev_a/mcuconf.h

@@ -35,3 +35,6 @@
 #define STM32_PLLQ_VALUE                    7
 #define STM32_PPRE1                         STM32_PPRE1_DIV2
 #define STM32_PPRE2                         STM32_PPRE2_DIV1
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE

keyboards/4pplet/perk60_iso/rev_a/readme.md

@@ -0,0 +1,17 @@
+# Perk60 ISO Rev A
+
+* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
+* Hardware Supported: Perk60 ISO Rev A
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 4pplet/perk60_iso/rev_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+How to enter bootloader (DFU):
+* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
+* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
+
+Alternative option if the firmware is already pre-flashed:
+* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.

keyboards/4pplet/perk60_iso/rev_a/rev_a.c

@@ -0,0 +1,126 @@
+/*
+Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "rev_a.h"
+
+#ifdef RGB_MATRIX_ENABLE
+const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
+    { 0, K_2,  J_2,  L_2 }, //D402
+    { 0, K_3,  J_3,  L_3 }, //D403
+    { 0, K_4,  J_4,  L_4 }, //D404
+    { 0, K_5,  J_5,  L_5 }, //D405
+    { 0, K_6,  J_6,  L_6 }, //D406
+    { 0, K_7,  J_7,  L_7 }, //D407
+    { 0, K_8,  J_8,  L_8 }, //D408
+    { 0, K_9,  J_9,  L_9 }, //D409
+    { 0, K_10, J_10, L_10 }, //D410
+    { 0, K_11, J_11, L_11 }, //D411
+    { 0, K_12, J_12, L_12 }, //D412
+    { 0, K_13, J_13, L_13 }, //D413
+    { 0, K_14, J_14, L_14 }, //D414
+    { 0, K_15, J_15, L_15 }, //D415
+    { 0, K_1,  J_1,  L_1 }, //D401
+    { 0, H_4,  G_4,  I_4 }, //D420
+    { 0, H_5,  G_5,  I_5 }, //D421
+    { 0, H_6,  G_6,  I_6 }, //D422
+    { 0, H_7,  G_7,  I_7 }, //D423
+    { 0, H_8,  G_8,  I_8 }, //D424
+    { 0, H_9,  G_9,  I_9 }, //D425
+    { 0, H_10, G_10, I_10 }, //D426
+    { 0, H_11, G_11, I_11 }, //D427
+    { 0, H_12, G_12, I_12 }, //D428
+    { 0, H_13, G_13, I_13 }, //D429
+    { 0, H_14, G_14, I_14 }, //D430
+    { 0, H_15, G_15, I_15 }, //D431
+    { 0, K_16, J_16, L_16 }, //D416
+    { 0, H_2,  G_2,  I_2 }, //D418
+    { 0, H_3,  G_3,  I_3 }, //D419
+    { 0, E_5,  D_5,  F_5 }, //D437
+    { 0, E_6,  D_6,  F_6 }, //D438
+    { 0, E_7,  D_7,  F_7 }, //D439
+    { 0, E_8,  D_8,  F_8 }, //D440
+    { 0, E_9,  D_9,  F_9 }, //D441
+    { 0, E_10, D_10, F_10 }, //D442
+    { 0, E_11, D_11, F_11 }, //D443
+    { 0, E_12, D_12, F_12 }, //D444
+    { 0, E_13, D_13, F_13 }, //D445
+    { 0, E_14, D_14, F_14 }, //D446
+    { 0, H_16, G_16, I_16 }, //D432
+    { 0, H_1,  G_1,  I_1 }, //D417
+    { 0, E_3,  D_3,  F_3 }, //D435
+    { 0, E_4,  D_4,  F_4 }, //D436
+    { 0, B_2,  A_2,  C_2 }, //D450
+    { 0, B_3,  A_3,  C_3 }, //D451
+    { 0, B_4,  A_4,  C_4 }, //D452
+    { 0, B_6,  A_6,  C_6 }, //D454
+    { 0, B_8,  A_8,  C_8 }, //D456
+    { 0, B_9,  A_9,  C_9 }, //D457
+    { 0, B_10, A_10, C_10 }, //D458
+    { 0, B_12, A_12, C_12 }, //D460
+    { 0, B_13, A_13, C_13 }, //D461
+    { 0, E_15, D_15, F_15 }, //D447
+    { 0, E_1,  D_1,  F_1 }, //D433
+    { 0, E_2,  D_2,  F_2 }, //D434
+    { 0, B_1,  A_1,  C_1 }, //D449
+    { 0, B_7,  A_7,  C_7 }, //D455
+    { 0, B_11, A_11, C_11 }, //D459
+    { 0, B_14, A_14, C_14 }, //D462
+    { 0, B_15,  A_15,  C_15 }, //D463
+    { 0, B_16,  A_16,  C_16 } //D464
+};
+
+led_config_t g_led_config = {
+    {
+    #define XXX NO_LED
+
+    {   0,   2,   4,   6,   8,  10,  12 },
+    {   1,   3,   5,   7,   9,  11, XXX },
+    {  14,  16,  18,  20,  22,  24,  26 },
+    {  15,  17,  19,  21,  23,  25,  13 },
+    {  28,  30,  32,  34,  36,  38,  40 },
+    {  29,  31,  33,  35,  37,  39, XXX },
+    {  41,  43,  45,  47,  49,  51, XXX },
+    {  42,  44,  46,  48,  50,  52,  27 },
+    {  54,  55, XXX,  57, XXX,  60,  53 },
+    {  56, XXX, XXX,  58,  59,  61, XXX },
+
+    }, {
+    {  0,0  }, { 16,0  }, { 32,0  }, { 48,0  }, { 65,0  }, { 81,0  }, { 97,0  }, {113,0  }, {129,0  }, {145,0  },
+    {161,0  }, {178,0  }, {194,0  }, {218,0  }, {  4,16 }, { 24,16 }, { 40,16 }, { 57,16 }, { 73,16 }, { 89,16 },
+    {105,16 }, {121,16 }, {137,16 }, {153,16 }, {170,16 }, {186,16 }, {202,16 }, {224,24 }, {  6,32 }, { 28,32 },
+    { 44,32 }, { 61,32 }, { 77,32 }, { 93,32 }, {109,32 }, {125,32 }, {141,32 }, {157,32 }, {174,32 }, {190,32 },
+    {206,32 }, {  2,48 }, { 20,48 }, { 36,48 }, { 52,48 }, { 69,48 }, { 85,48 }, {101,48 }, {117,48 }, {133,48 },
+    {149,48 }, {165,48 }, {182,48 }, {212,48 }, {  2,64 }, { 22,64 }, { 42,64 }, {103,64 }, {163,64 }, {184,64 },
+    {204,64 }, {224,64 },
+    }, {
+        1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+        1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+        8, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+        1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+        1, 1, 1, 4, 1, 1, 1, 1
+    }
+};
+
+__attribute__((weak)) void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+    if (host_keyboard_led_state().caps_lock && CAPS_LOCK_ENABLE) {
+        for (uint8_t i = led_min; i <= led_max; i++) {
+            if (g_led_config.flags[i] & CAPS_LED_GROUP) {
+                rgb_matrix_set_color(i, CAPS_LOCK_COLOR);
+            }
+        }
+    }
+}
+#endif

keyboards/4pplet/perk60_iso/rev_a/rev_a.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2022 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#define CAPS_LOCK_ENABLE true
+#define CAPS_LOCK_COLOR RGB_RED
+#define CAPS_LED_GROUP LED_FLAG_INDICATOR // change what leds to target, for example LED_FLAG_KEYLIGHT for alpas or LED_FLAG_MODIFIER for modifiers
+
+#include "quantum.h"
+
+#define LAYOUT_60_iso( \
+    k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k36, \
+    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26,      \
+    k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k76, \
+    k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k86,\
+    k80, k90, k81,                k83, k93,      k94, k85, k95  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06}, \
+    {k10, k11, k12, k13, k14, k15, KC_NO}, \
+    {k20, k21, k22, k23, k24, k25, k26}, \
+    {k30, k31, k32, k33, k34, k35, k36}, \
+    {k40, k41, k42, k43, k44, k45, k46}, \
+    {k50, k51, k52, k53, k54, k55, KC_NO}, \
+    {k60, k61, k62, k63, k64, k65, KC_NO}, \
+    {k70, k71, k72, k73, k74, k75, k76}, \
+    {k80, k81, KC_NO, k83, KC_NO, k85, k86}, \
+    {k90, KC_NO, KC_NO, k93, k94, k95, KC_NO}  \
+}

keyboards/4pplet/perk60_iso/rev_a/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = STM32F411
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = IS31FL3733
+
+LAYOUTS = 60_iso
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/4pplet/waffling80/rev_a/rev_a.h

@@ -31,7 +31,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k77, kb7, \
     k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76,  \
     k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k96, k87, \
-    ka0, ka1, kb1, kb2, ka3, kb3, ka4, kb4, ka5, kb5, ka6, kb6, ka7, \
+    ka0, kb1, ka1, kb2, ka3, kb3, ka4, kb4, ka5, kb5, ka6, kb6, ka7, \
     kb0, ka2 \
 ) \
 { \

keyboards/4pplet/yakiimo/rev_a/config.h

@@ -40,5 +40,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
-
-#define STM32_HSECLK 8000000

keyboards/4pplet/yakiimo/rev_a/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F411
+BOARD = GENERIC_STM32_F411XE
 
 # Bootloader selection
 BOOTLOADER = stm32-dfu

keyboards/a_dux/config.h

@@ -18,13 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xC2AB
-#define PRODUCT_ID      0x3939
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    tapioki
-#define PRODUCT         Architeuthis dux
-
 /* key matrix size */
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 5

keyboards/a_dux/info.json

@@ -1,7 +1,13 @@
 {
     "keyboard_name": "Architeuthis dux",
+    "manufacturer": "tapioki",
     "url": "https://github.com/tapioki/cephalopoda",
     "maintainer": "@tapioki",
+    "usb": {
+        "vid": "0xC2AB",
+        "pid": "0x3939",
+        "device_version": "0.0.1"
+    },
     "layouts": {
         "LAYOUT_split_3x5_2": {
             "layout": [

keyboards/a_dux/keymaps/manna-harbour_miryoku/config.h

@@ -0,0 +1,19 @@
+// Copyright 2021 Manna Harbour
+// https://github.com/manna-harbour/miryoku
+
+// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+#pragma once
+
+#define LAYOUT_miryoku( \
+K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09, \
+K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19, \
+K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29, \
+N30,   N31,   K32,   K33,   K34,          K35,   K36,   K37,   N38,   N39 \
+) \
+LAYOUT( \
+K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09, \
+K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19, \
+K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29, \
+                     K33,   K34,          K35,   K36 \
+)

keyboards/a_dux/keymaps/manna-harbour_miryoku/keymap.c

@@ -0,0 +1,4 @@
+// Copyright 2019 Manna Harbour
+// https://github.com/manna-harbour/miryoku
+
+// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/a_dux/keymaps/manna-harbour_miryoku/rules.mk

@@ -0,0 +1,4 @@
+# Copyright 2021 Manna Harbour
+# https://github.com/manna-harbour/miryoku
+
+MIRYOKU_KLUDGE_THUMBCOMBOS=yes

keyboards/abacus/config.h

@@ -19,13 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0000
-#define DEVICE_VER 0x0001
-#define MANUFACTURER nickolaij
-#define PRODUCT abacus
-
 /* key matrix size */
 #define MATRIX_ROWS 4
 #define MATRIX_COLS 12

keyboards/abacus/info.json

@@ -1,7 +1,13 @@
 {
     "keyboard_name": "Abacus",
+    "manufacturer": "nickolaij",
     "url": "https://www.github.com/nickolaij",
     "maintainer": "nickolaij",
+    "usb": {
+        "vid": "0xFEED",
+        "pid": "0x0000",
+        "device_version": "0.0.1"
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/abatskeyboardclub/nayeon/config.h

@@ -0,0 +1,130 @@
+/*
+Copyright 2022 Ramon Imbao
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B2, B3, B7, D6, D3, D2 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D4, D5, B0, B1, D1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 26
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== or choose animations ==*/
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_CHRISTMAS
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#    define RGBLIGHT_EFFECT_RGB_TEST
+#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/abatskeyboardclub/nayeon/info.json

@@ -0,0 +1,506 @@
+{
+    "keyboard_name": "Nayeon",
+    "manufacturer": "Abats Keyboard Club",
+    "url": "",
+    "maintainer": "ramonimbao",
+    "layout_aliases": {
+        "LAYOUT_ansi": "LAYOUT_tkl_f13_ansi_tsangan",
+        "LAYOUT_iso": "LAYOUT_tkl_f13_iso_tsangan"
+    },
+    "usb": {
+        "vid": "0x4B47",
+        "pid": "0x0001",
+        "device_version": "0.0.1"
+    },
+    "layouts": {
+        "LAYOUT_tkl_f13_ansi_tsangan": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1.25, "y":0},
+                {"x":2.25, "y":0},
+                {"x":3.25, "y":0},
+                {"x":4.25, "y":0},
+                {"x":5.5, "y":0},
+                {"x":6.5, "y":0},
+                {"x":7.5, "y":0},
+                {"x":8.5, "y":0},
+                {"x":9.75, "y":0},
+                {"x":10.75, "y":0},
+                {"x":11.75, "y":0},
+                {"x":12.75, "y":0},
+                {"x":14, "y":0},
+                {"x":15.25, "y":0},
+                {"x":16.25, "y":0},
+                {"x":17.25, "y":0},
+
+                {"x":0, "y":1.25},
+                {"x":1, "y":1.25},
+                {"x":2, "y":1.25},
+                {"x":3, "y":1.25},
+                {"x":4, "y":1.25},
+                {"x":5, "y":1.25},
+                {"x":6, "y":1.25},
+                {"x":7, "y":1.25},
+                {"x":8, "y":1.25},
+                {"x":9, "y":1.25},
+                {"x":10, "y":1.25},
+                {"x":11, "y":1.25},
+                {"x":12, "y":1.25},
+                {"x":13, "y":1.25, "w":2},
+                {"x":15.25, "y":1.25},
+                {"x":16.25, "y":1.25},
+                {"x":17.25, "y":1.25},
+
+                {"x":0, "y":2.25, "w":1.5},
+                {"x":1.5, "y":2.25},
+                {"x":2.5, "y":2.25},
+                {"x":3.5, "y":2.25},
+                {"x":4.5, "y":2.25},
+                {"x":5.5, "y":2.25},
+                {"x":6.5, "y":2.25},
+                {"x":7.5, "y":2.25},
+                {"x":8.5, "y":2.25},
+                {"x":9.5, "y":2.25},
+                {"x":10.5, "y":2.25},
+                {"x":11.5, "y":2.25},
+                {"x":12.5, "y":2.25},
+                {"x":13.5, "y":2.25, "w":1.5},
+                {"x":15.25, "y":2.25},
+                {"x":16.25, "y":2.25},
+                {"x":17.25, "y":2.25},
+
+                {"x":0, "y":3.25, "w":1.75},
+                {"x":1.75, "y":3.25},
+                {"x":2.75, "y":3.25},
+                {"x":3.75, "y":3.25},
+                {"x":4.75, "y":3.25},
+                {"x":5.75, "y":3.25},
+                {"x":6.75, "y":3.25},
+                {"x":7.75, "y":3.25},
+                {"x":8.75, "y":3.25},
+                {"x":9.75, "y":3.25},
+                {"x":10.75, "y":3.25},
+                {"x":11.75, "y":3.25},
+                {"x":12.75, "y":3.25, "w":2.25},
+
+                {"x":0, "y":4.25, "w":2.25},
+                {"x":2.25, "y":4.25},
+                {"x":3.25, "y":4.25},
+                {"x":4.25, "y":4.25},
+                {"x":5.25, "y":4.25},
+                {"x":6.25, "y":4.25},
+                {"x":7.25, "y":4.25},
+                {"x":8.25, "y":4.25},
+                {"x":9.25, "y":4.25},
+                {"x":10.25, "y":4.25},
+                {"x":11.25, "y":4.25},
+                {"x":12.25, "y":4.25, "w":2.75},
+                {"x":16.25, "y":4.25},
+
+                {"x":0, "y":5.25, "w":1.5},
+                {"x":1.5, "y":5.25},
+                {"x":2.5, "y":5.25, "w":1.5},
+                {"x":4, "y":5.25, "w":7},
+                {"x":11, "y":5.25, "w":1.5},
+                {"x":12.5, "y":5.25},
+                {"x":13.5, "y":5.25, "w":1.5},
+                {"x":15.25, "y":5.25},
+                {"x":16.25, "y":5.25},
+                {"x":17.25, "y":5.25}
+            ]
+        },
+        "LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1.25, "y":0},
+                {"x":2.25, "y":0},
+                {"x":3.25, "y":0},
+                {"x":4.25, "y":0},
+                {"x":5.5, "y":0},
+                {"x":6.5, "y":0},
+                {"x":7.5, "y":0},
+                {"x":8.5, "y":0},
+                {"x":9.75, "y":0},
+                {"x":10.75, "y":0},
+                {"x":11.75, "y":0},
+                {"x":12.75, "y":0},
+                {"x":14, "y":0},
+                {"x":15.25, "y":0},
+                {"x":16.25, "y":0},
+                {"x":17.25, "y":0},
+
+                {"x":0, "y":1.25},
+                {"x":1, "y":1.25},
+                {"x":2, "y":1.25},
+                {"x":3, "y":1.25},
+                {"x":4, "y":1.25},
+                {"x":5, "y":1.25},
+                {"x":6, "y":1.25},
+                {"x":7, "y":1.25},
+                {"x":8, "y":1.25},
+                {"x":9, "y":1.25},
+                {"x":10, "y":1.25},
+                {"x":11, "y":1.25},
+                {"x":12, "y":1.25},
+                {"x":13, "y":1.25},
+                {"x":14, "y":1.25},
+                {"x":15.25, "y":1.25},
+                {"x":16.25, "y":1.25},
+                {"x":17.25, "y":1.25},
+
+                {"x":0, "y":2.25, "w":1.5},
+                {"x":1.5, "y":2.25},
+                {"x":2.5, "y":2.25},
+                {"x":3.5, "y":2.25},
+                {"x":4.5, "y":2.25},
+                {"x":5.5, "y":2.25},
+                {"x":6.5, "y":2.25},
+                {"x":7.5, "y":2.25},
+                {"x":8.5, "y":2.25},
+                {"x":9.5, "y":2.25},
+                {"x":10.5, "y":2.25},
+                {"x":11.5, "y":2.25},
+                {"x":12.5, "y":2.25},
+                {"x":13.5, "y":2.25, "w":1.5},
+                {"x":15.25, "y":2.25},
+                {"x":16.25, "y":2.25},
+                {"x":17.25, "y":2.25},
+
+                {"x":0, "y":3.25, "w":1.75},
+                {"x":1.75, "y":3.25},
+                {"x":2.75, "y":3.25},
+                {"x":3.75, "y":3.25},
+                {"x":4.75, "y":3.25},
+                {"x":5.75, "y":3.25},
+                {"x":6.75, "y":3.25},
+                {"x":7.75, "y":3.25},
+                {"x":8.75, "y":3.25},
+                {"x":9.75, "y":3.25},
+                {"x":10.75, "y":3.25},
+                {"x":11.75, "y":3.25},
+                {"x":12.75, "y":3.25, "w":2.25},
+
+                {"x":0, "y":4.25, "w":2.25},
+                {"x":2.25, "y":4.25},
+                {"x":3.25, "y":4.25},
+                {"x":4.25, "y":4.25},
+                {"x":5.25, "y":4.25},
+                {"x":6.25, "y":4.25},
+                {"x":7.25, "y":4.25},
+                {"x":8.25, "y":4.25},
+                {"x":9.25, "y":4.25},
+                {"x":10.25, "y":4.25},
+                {"x":11.25, "y":4.25},
+                {"x":12.25, "y":4.25, "w":1.75},
+                {"x":14, "y":4.25},
+                {"x":16.25, "y":4.25},
+
+                {"x":0, "y":5.25, "w":1.5},
+                {"x":1.5, "y":5.25},
+                {"x":2.5, "y":5.25, "w":1.5},
+                {"x":4, "y":5.25, "w":7},
+                {"x":11, "y":5.25, "w":1.5},
+                {"x":12.5, "y":5.25},
+                {"x":13.5, "y":5.25, "w":1.5},
+                {"x":15.25, "y":5.25},
+                {"x":16.25, "y":5.25},
+                {"x":17.25, "y":5.25}
+            ]
+        },
+        "LAYOUT_tkl_f13_iso_tsangan": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1.25, "y":0},
+                {"x":2.25, "y":0},
+                {"x":3.25, "y":0},
+                {"x":4.25, "y":0},
+                {"x":5.5, "y":0},
+                {"x":6.5, "y":0},
+                {"x":7.5, "y":0},
+                {"x":8.5, "y":0},
+                {"x":9.75, "y":0},
+                {"x":10.75, "y":0},
+                {"x":11.75, "y":0},
+                {"x":12.75, "y":0},
+                {"x":14, "y":0},
+                {"x":15.25, "y":0},
+                {"x":16.25, "y":0},
+                {"x":17.25, "y":0},
+
+                {"x":0, "y":1.25},
+                {"x":1, "y":1.25},
+                {"x":2, "y":1.25},
+                {"x":3, "y":1.25},
+                {"x":4, "y":1.25},
+                {"x":5, "y":1.25},
+                {"x":6, "y":1.25},
+                {"x":7, "y":1.25},
+                {"x":8, "y":1.25},
+                {"x":9, "y":1.25},
+                {"x":10, "y":1.25},
+                {"x":11, "y":1.25},
+                {"x":12, "y":1.25},
+                {"x":13, "y":1.25, "w":2},
+                {"x":15.25, "y":1.25},
+                {"x":16.25, "y":1.25},
+                {"x":17.25, "y":1.25},
+
+                {"x":0, "y":2.25, "w":1.5},
+                {"x":1.5, "y":2.25},
+                {"x":2.5, "y":2.25},
+                {"x":3.5, "y":2.25},
+                {"x":4.5, "y":2.25},
+                {"x":5.5, "y":2.25},
+                {"x":6.5, "y":2.25},
+                {"x":7.5, "y":2.25},
+                {"x":8.5, "y":2.25},
+                {"x":9.5, "y":2.25},
+                {"x":10.5, "y":2.25},
+                {"x":11.5, "y":2.25},
+                {"x":12.5, "y":2.25},
+                {"x":15.25, "y":2.25},
+                {"x":16.25, "y":2.25},
+                {"x":17.25, "y":2.25},
+
+                {"x":0, "y":3.25, "w":1.75},
+                {"x":1.75, "y":3.25},
+                {"x":2.75, "y":3.25},
+                {"x":3.75, "y":3.25},
+                {"x":4.75, "y":3.25},
+                {"x":5.75, "y":3.25},
+                {"x":6.75, "y":3.25},
+                {"x":7.75, "y":3.25},
+                {"x":8.75, "y":3.25},
+                {"x":9.75, "y":3.25},
+                {"x":10.75, "y":3.25},
+                {"x":11.75, "y":3.25},
+                {"x":12.75, "y":3.25},
+                {"x":13.75, "y":2.25, "w":1.25, "h":2},
+
+                {"x":0, "y":4.25, "w":1.25},
+                {"x":1.25, "y":4.25},
+                {"x":2.25, "y":4.25},
+                {"x":3.25, "y":4.25},
+                {"x":4.25, "y":4.25},
+                {"x":5.25, "y":4.25},
+                {"x":6.25, "y":4.25},
+                {"x":7.25, "y":4.25},
+                {"x":8.25, "y":4.25},
+                {"x":9.25, "y":4.25},
+                {"x":10.25, "y":4.25},
+                {"x":11.25, "y":4.25},
+                {"x":12.25, "y":4.25, "w":2.75},
+                {"x":16.25, "y":4.25},
+
+                {"x":0, "y":5.25, "w":1.5},
+                {"x":1.5, "y":5.25},
+                {"x":2.5, "y":5.25, "w":1.5},
+                {"x":4, "y":5.25, "w":7},
+                {"x":11, "y":5.25, "w":1.5},
+                {"x":12.5, "y":5.25},
+                {"x":13.5, "y":5.25, "w":1.5},
+                {"x":15.25, "y":5.25},
+                {"x":16.25, "y":5.25},
+                {"x":17.25, "y":5.25}
+            ]
+        },
+        "LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1.25, "y":0},
+                {"x":2.25, "y":0},
+                {"x":3.25, "y":0},
+                {"x":4.25, "y":0},
+                {"x":5.5, "y":0},
+                {"x":6.5, "y":0},
+                {"x":7.5, "y":0},
+                {"x":8.5, "y":0},
+                {"x":9.75, "y":0},
+                {"x":10.75, "y":0},
+                {"x":11.75, "y":0},
+                {"x":12.75, "y":0},
+                {"x":14, "y":0},
+                {"x":15.25, "y":0},
+                {"x":16.25, "y":0},
+                {"x":17.25, "y":0},
+
+                {"x":0, "y":1.25},
+                {"x":1, "y":1.25},
+                {"x":2, "y":1.25},
+                {"x":3, "y":1.25},
+                {"x":4, "y":1.25},
+                {"x":5, "y":1.25},
+                {"x":6, "y":1.25},
+                {"x":7, "y":1.25},
+                {"x":8, "y":1.25},
+                {"x":9, "y":1.25},
+                {"x":10, "y":1.25},
+                {"x":11, "y":1.25},
+                {"x":12, "y":1.25},
+                {"x":13, "y":1.25},
+                {"x":14, "y":1.25},
+                {"x":15.25, "y":1.25},
+                {"x":16.25, "y":1.25},
+                {"x":17.25, "y":1.25},
+
+                {"x":0, "y":2.25, "w":1.5},
+                {"x":1.5, "y":2.25},
+                {"x":2.5, "y":2.25},
+                {"x":3.5, "y":2.25},
+                {"x":4.5, "y":2.25},
+                {"x":5.5, "y":2.25},
+                {"x":6.5, "y":2.25},
+                {"x":7.5, "y":2.25},
+                {"x":8.5, "y":2.25},
+                {"x":9.5, "y":2.25},
+                {"x":10.5, "y":2.25},
+                {"x":11.5, "y":2.25},
+                {"x":12.5, "y":2.25},
+                {"x":15.25, "y":2.25},
+                {"x":16.25, "y":2.25},
+                {"x":17.25, "y":2.25},
+
+                {"x":0, "y":3.25, "w":1.75},
+                {"x":1.75, "y":3.25},
+                {"x":2.75, "y":3.25},
+                {"x":3.75, "y":3.25},
+                {"x":4.75, "y":3.25},
+                {"x":5.75, "y":3.25},
+                {"x":6.75, "y":3.25},
+                {"x":7.75, "y":3.25},
+                {"x":8.75, "y":3.25},
+                {"x":9.75, "y":3.25},
+                {"x":10.75, "y":3.25},
+                {"x":11.75, "y":3.25},
+                {"x":12.75, "y":3.25},
+                {"x":13.75, "y":2.25, "w":1.25, "h":2},
+
+                {"x":0, "y":4.25, "w":1.25},
+                {"x":1.25, "y":4.25},
+                {"x":2.25, "y":4.25},
+                {"x":3.25, "y":4.25},
+                {"x":4.25, "y":4.25},
+                {"x":5.25, "y":4.25},
+                {"x":6.25, "y":4.25},
+                {"x":7.25, "y":4.25},
+                {"x":8.25, "y":4.25},
+                {"x":9.25, "y":4.25},
+                {"x":10.25, "y":4.25},
+                {"x":11.25, "y":4.25},
+                {"x":12.25, "y":4.25, "w":1.75},
+                {"x":14, "y":4.25},
+                {"x":16.25, "y":4.25},
+
+                {"x":0, "y":5.25, "w":1.5},
+                {"x":1.5, "y":5.25},
+                {"x":2.5, "y":5.25, "w":1.5},
+                {"x":4, "y":5.25, "w":7},
+                {"x":11, "y":5.25, "w":1.5},
+                {"x":12.5, "y":5.25},
+                {"x":13.5, "y":5.25, "w":1.5},
+                {"x":15.25, "y":5.25},
+                {"x":16.25, "y":5.25},
+                {"x":17.25, "y":5.25}
+            ]
+        },
+        "LAYOUT_all": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1.25, "y":0},
+                {"x":2.25, "y":0},
+                {"x":3.25, "y":0},
+                {"x":4.25, "y":0},
+                {"x":5.5, "y":0},
+                {"x":6.5, "y":0},
+                {"x":7.5, "y":0},
+                {"x":8.5, "y":0},
+                {"x":9.75, "y":0},
+                {"x":10.75, "y":0},
+                {"x":11.75, "y":0},
+                {"x":12.75, "y":0},
+                {"x":14, "y":0},
+                {"x":15.25, "y":0},
+                {"x":16.25, "y":0},
+                {"x":17.25, "y":0},
+
+                {"x":0, "y":1.25},
+                {"x":1, "y":1.25},
+                {"x":2, "y":1.25},
+                {"x":3, "y":1.25},
+                {"x":4, "y":1.25},
+                {"x":5, "y":1.25},
+                {"x":6, "y":1.25},
+                {"x":7, "y":1.25},
+                {"x":8, "y":1.25},
+                {"x":9, "y":1.25},
+                {"x":10, "y":1.25},
+                {"x":11, "y":1.25},
+                {"x":12, "y":1.25},
+                {"x":13, "y":1.25},
+                {"x":14, "y":1.25},
+                {"x":15.25, "y":1.25},
+                {"x":16.25, "y":1.25},
+                {"x":17.25, "y":1.25},
+
+                {"x":0, "y":2.25, "w":1.5},
+                {"x":1.5, "y":2.25},
+                {"x":2.5, "y":2.25},
+                {"x":3.5, "y":2.25},
+                {"x":4.5, "y":2.25},
+                {"x":5.5, "y":2.25},
+                {"x":6.5, "y":2.25},
+                {"x":7.5, "y":2.25},
+                {"x":8.5, "y":2.25},
+                {"x":9.5, "y":2.25},
+                {"x":10.5, "y":2.25},
+                {"x":11.5, "y":2.25},
+                {"x":12.5, "y":2.25},
+                {"x":13.5, "y":2.25, "w":1.5},
+                {"x":15.25, "y":2.25},
+                {"x":16.25, "y":2.25},
+                {"x":17.25, "y":2.25},
+
+                {"x":0, "y":3.25, "w":1.75},
+                {"x":1.75, "y":3.25},
+                {"x":2.75, "y":3.25},
+                {"x":3.75, "y":3.25},
+                {"x":4.75, "y":3.25},
+                {"x":5.75, "y":3.25},
+                {"x":6.75, "y":3.25},
+                {"x":7.75, "y":3.25},
+                {"x":8.75, "y":3.25},
+                {"x":9.75, "y":3.25},
+                {"x":10.75, "y":3.25},
+                {"x":11.75, "y":3.25},
+                {"x":12.75, "y":3.25, "w":2.25},
+
+                {"x":0, "y":4.25, "w":1.25},
+                {"x":1.25, "y":4.25},
+                {"x":2.25, "y":4.25},
+                {"x":3.25, "y":4.25},
+                {"x":4.25, "y":4.25},
+                {"x":5.25, "y":4.25},
+                {"x":6.25, "y":4.25},
+                {"x":7.25, "y":4.25},
+                {"x":8.25, "y":4.25},
+                {"x":9.25, "y":4.25},
+                {"x":10.25, "y":4.25},
+                {"x":11.25, "y":4.25},
+                {"x":12.25, "y":4.25, "w":1.75},
+                {"x":14, "y":4.25},
+                {"x":16.25, "y":4.25},
+
+                {"x":0, "y":5.25, "w":1.5},
+                {"x":1.5, "y":5.25},
+                {"x":2.5, "y":5.25, "w":1.5},
+                {"x":4, "y":5.25, "w":7},
+                {"x":11, "y":5.25, "w":1.5},
+                {"x":12.5, "y":5.25},
+                {"x":13.5, "y":5.25, "w":1.5},
+                {"x":15.25, "y":5.25},
+                {"x":16.25, "y":5.25},
+                {"x":17.25, "y":5.25}
+            ]
+        }
+    }
+}

keyboards/abatskeyboardclub/nayeon/keymaps/default/config.h

@@ -0,0 +1,20 @@
+/* Copyright 2022 Ramon Imbao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define RGBLIGHT_LAYERS
+#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF

keyboards/abatskeyboardclub/nayeon/keymaps/default/keymap.c

@@ -0,0 +1,61 @@
+/* Copyright 2022 Ramon Imbao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_tkl_f13_ansi_tsangan(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,  KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    )
+};
+
+#ifdef RGBLIGHT_ENABLE
+
+const rgblight_segment_t PROGMEM ll_none[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_OFF},
+    {1, 1, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM ll_cl[] = RGBLIGHT_LAYER_SEGMENTS(
+    {1, 1, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM ll_sl[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_OFF}
+);
+
+const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(ll_none, ll_cl, ll_sl);
+
+void keyboard_post_init_user(void) {
+    rgblight_layers = rgb_layers;
+}
+
+bool led_update_user(led_t led_state) {
+    uint8_t lock_bits = led_state.scroll_lock << 1 | led_state.caps_lock;
+    for (uint8_t i=0; i<3; i++) {
+        rgblight_set_layer_state(i, false);
+    }
+    if (lock_bits < 3) {
+        rgblight_set_layer_state(lock_bits, true);
+    }
+
+    return false;
+}
+#endif

keyboards/abatskeyboardclub/nayeon/keymaps/iso/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2022 Ramon Imbao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define RGBLIGHT_LAYERS
+#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF

keyboards/abatskeyboardclub/nayeon/keymaps/iso/keymap.c

@@ -0,0 +1,61 @@
+/* Copyright 2022 Ramon Imbao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_tkl_f13_iso_tsangan(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,  KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                   KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    )
+};
+
+#ifdef RGBLIGHT_ENABLE
+
+const rgblight_segment_t PROGMEM ll_none[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_OFF},
+    {1, 1, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM ll_cl[] = RGBLIGHT_LAYER_SEGMENTS(
+    {1, 1, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM ll_sl[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_OFF}
+);
+
+const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(ll_none, ll_cl, ll_sl);
+
+void keyboard_post_init_user(void) {
+    rgblight_layers = rgb_layers;
+}
+
+bool led_update_user(led_t led_state) {
+    uint8_t lock_bits = led_state.scroll_lock << 1 | led_state.caps_lock;
+    for (uint8_t i=0; i<3; i++) {
+        rgblight_set_layer_state(i, false);
+    }
+    if (lock_bits < 3) {
+        rgblight_set_layer_state(lock_bits, true);
+    }
+
+    return false;
+}
+#endif

keyboards/abatskeyboardclub/nayeon/keymaps/via/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2022 Ramon Imbao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define RGBLIGHT_LAYERS
+#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF

keyboards/abatskeyboardclub/nayeon/keymaps/via/keymap.c

@@ -0,0 +1,85 @@
+/* Copyright 2022 Ramon Imbao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_all(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,           KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_NO,                     KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RALT, KC_RGUI, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
+        _______, _______, _______,                            _______,                                     _______, _______, _______,          _______, _______, _______
+    ),
+    [2] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
+        _______, _______, _______,                            _______,                                     _______, _______, _______,          _______, _______, _______
+    ),
+    [3] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
+        _______, _______, _______,                            _______,                                     _______, _______, _______,          _______, _______, _______
+    )
+};
+
+#ifdef RGBLIGHT_ENABLE
+
+const rgblight_segment_t PROGMEM ll_none[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_OFF},
+    {1, 1, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM ll_cl[] = RGBLIGHT_LAYER_SEGMENTS(
+    {1, 1, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM ll_sl[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_OFF}
+);
+
+const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(ll_none, ll_cl, ll_sl);
+
+void keyboard_post_init_user(void) {
+    rgblight_layers = rgb_layers;
+}
+
+bool led_update_user(led_t led_state) {
+    uint8_t lock_bits = led_state.scroll_lock << 1 | led_state.caps_lock;
+    for (uint8_t i=0; i<3; i++) {
+        rgblight_set_layer_state(i, false);
+    }
+    if (lock_bits < 3) {
+        rgblight_set_layer_state(lock_bits, true);
+    }
+
+    return false;
+}
+#endif

keyboards/abatskeyboardclub/nayeon/nayeon.c

@@ -1,4 +1,4 @@
-/* Copyright 2021 Zach White
+/* Copyright 2022 Ramon Imbao
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,4 +14,4 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "teensy2.h"
+#include "nayeon.h"

keyboards/abatskeyboardclub/nayeon/nayeon.h

@@ -0,0 +1,121 @@
+/* Copyright 2022 Ramon Imbao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+// ANSI layout
+// Full backspace
+// Full right shift
+// Full left shift
+#define LAYOUT_tkl_f13_ansi_tsangan( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3c,                \
+    k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c,                k4f,      \
+    k50, k51, k52,                k57,                     k5b, k5c, k5d, k5e, k5f, k5g  \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, ___, ___, ___, ___ }, \
+    { k40, ___, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, ___, ___, k4f, ___ }, \
+    { k50, k51, k52, ___, ___, ___, ___, k57, ___, ___, ___, k5b, k5c, k5d, k5e, k5f, k5g }, \
+}
+
+// ANSI layout
+// Split backspace
+// Split right shift
+// Full left shift
+#define LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d,      k0e, k0f, k0g, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k3d, k1e, k1f, k1g, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      k2e, k2f, k2g, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3c,                     \
+    k40,      k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d,           k4f,      \
+    k50, k51, k52,                k57,                     k5b, k5c, k5d,      k5e, k5f, k5g  \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, ___, ___, ___ }, \
+    { k40, ___, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, ___, k4f, ___ }, \
+    { k50, k51, k52, ___, ___, ___, ___, k57, ___, ___, ___, k5b, k5c, k5d, k5e, k5f, k5g }, \
+}
+
+// ISO layout
+// Full backspace
+// Full right shift
+// Split left shift
+#define LAYOUT_tkl_f13_iso_tsangan( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c,      k2e, k2f, k2g, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k2d,                \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c,                k4f,      \
+    k50, k51, k52,                k57,                     k5b, k5c, k5d, k5e, k5f, k5g  \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, ___, ___, ___, ___ }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, ___, ___, k4f, ___ }, \
+    { k50, k51, k52, ___, ___, ___, ___, k57, ___, ___, ___, k5b, k5c, k5d, k5e, k5f, k5g }, \
+}
+
+// ISO layout
+// Split backspace
+// Split right shift
+// Split left shift
+#define LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d,      k0e, k0f, k0g, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k3d, k1e, k1f, k1g, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c,           k2e, k2f, k2g, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k2d,                     \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d,           k4f,      \
+    k50, k51, k52,                k57,                     k5b, k5c, k5d,      k5e, k5f, k5g  \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, ___, ___, ___ }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, ___, k4f, ___ }, \
+    { k50, k51, k52, ___, ___, ___, ___, k57, ___, ___, ___, k5b, k5c, k5d, k5e, k5f, k5g }, \
+}
+
+// Layout for VIA
+// Split backspace
+// Split left shift
+// Split right shift
+#define LAYOUT_all( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d,      k0e, k0f, k0g, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k3d, k1e, k1f, k1g, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      k2e, k2f, k2g, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3c,                     \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d,           k4f,      \
+    k50, k51, k52,                     k57,                k5b, k5c, k5d,      k5e, k5f, k5g  \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, ___, ___, ___ }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, ___, k4f, ___ }, \
+    { k50, k51, k52, ___, ___, ___, ___, k57, ___, ___, ___, k5b, k5c, k5d, k5e, k5f, k5g }  \
+}

keyboards/abatskeyboardclub/nayeon/readme.md

@@ -0,0 +1,20 @@
+# Nayeon
+
+![Nayeon](https://i.imgur.com/OfB5ikbl.jpg)
+
+Nayeon is a screwless TKL keyboard with an extra key, inspired by a K-pop artist named Im-Nayeon.
+
+* Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao)
+* Hardware Supported: ATmega32u4
+
+Make example for this keyboard (after setting up your build environment):
+
+    make abatskeyboardclub/nayeon:via
+    
+To get to the bootloader, simply press the reset button located at the back of the PCB. You can then flash new firmware onto it.
+
+Flashing example for this keyboard:
+
+    make abatskeyboardclub/nayeon:via:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/abatskeyboardclub/nayeon/rules.mk

@@ -0,0 +1,20 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+LAYOUTS = tkl_f13_ansi_tsangan tkl_f13_ansi_tsangan_split_bs_rshift tkl_f13_iso_tsangan tkl_f13_iso_tsangan_split_bs_rshift

keyboards/acekeyboard/titan60/config.h

@@ -19,13 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0xACE1 // Ace
-#define PRODUCT_ID   0x5449 // TI
-#define DEVICE_VER   0x0001
-#define MANUFACTURER Acekeyboard
-#define PRODUCT      titan60
-
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14

keyboards/acekeyboard/titan60/info.json

@@ -1,7 +1,13 @@
 {
     "keyboard_name": "Titan60",
+    "manufacturer": "Acekeyboard",
     "url": "https://acekeyboard.co/",
     "maintainer": "keebnewb",
+    "usb": {
+        "vid": "0xACE1",
+        "pid": "0x5449",
+        "device_version": "0.0.1"
+    },
     "layouts": {
       "LAYOUT_60_ansi": {
         "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]

keyboards/acheron/apollo/87h/87h.c

@@ -0,0 +1,16 @@
+/* Copyright 2022 Alvaro "Gondolindrim" Volpato
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "87h.h"

keyboards/acheron/apollo/87h/87h.h

@@ -0,0 +1,24 @@
+/* Copyright 2022 Alvaro "Gondolindrim" Volpato
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#if defined(KEYBOARD_acheron_apollo_87h_gamma)
+    #include "gamma.h"
+#elif defined(KEYBOARD_acheron_apollo_87h_delta)
+    #include "delta.h"
+#endif

keyboards/acheron/apollo/87h/delta/config.h

@@ -0,0 +1,116 @@
+/*
+Copyright 2022 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4150 // AP for AcheronProject
+#define PRODUCT_ID      0x8775 // For 87H + 3 (revision Delta)
+#define DEVICE_VER      0x0004 // Revision Delta
+#define MANUFACTURER    AcheronProject
+#define PRODUCT         Apollo87H
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+//                        C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 } 
+#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4  }
+//                        R0 , R1 , R2 , R3 , R4 , R5 
+#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define EEPROM_I2C_24LC256
+//#define I2C1_CLOCK_SPEED 400000
+//#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
+
+#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+
+#define STM32_HSECLK 8000000
+
+#define RGB_DI_PIN B15
+#define DRIVER_LED_TOTAL 87
+
+#define WS2812_PWM_COMPLEMENTARY_OUTPUT
+#define WS2812_PWM_DRIVER PWMD1
+#define WS2812_PWM_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA2_STREAM5
+#define WS2812_DMA_CHANNEL 6
+
+#define RGB_MATRIX_STARTUP_VAL 60
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+#define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_BREATHING
+#define ENABLE_RGB_MATRIX_BAND_SAT
+#define ENABLE_RGB_MATRIX_BAND_VAL
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#define ENABLE_RGB_MATRIX_CYCLE_ALL
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#define ENABLE_RGB_MATRIX_DUAL_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define ENABLE_RGB_MATRIX_RAINDROPS
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define ENABLE_RGB_MATRIX_HUE_BREATHING
+#define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#define ENABLE_RGB_MATRIX_HUE_WAVE
+#define ENABLE_RGB_MATRIX_FRACTAL
+#define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#define ENABLE_RGB_MATRIX_PIXEL_FLOW
+
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#define ENABLE_RGB_MATRIX_SPLASH
+#define ENABLE_RGB_MATRIX_MULTISPLASH
+#define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH

keyboards/acheron/apollo/87h/delta/delta.c

@@ -0,0 +1,61 @@
+/*
+ Copyright 2022 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "delta.h"
+
+void board_init(void) {
+    setPinInput(B9);
+    setPinInput(B10);
+}
+
+led_config_t g_led_config = { {
+//	{ 0        , 1          , 2          , 3          , 4          , 5          , 6          , 7          , 8          , 9          , 10         , 11         , 12         , NO_LED     , 13         , 14         , 15        },
+//	{ 16       , 17         , 18         , 19         , 20         , 21         , 22         , 23         , 24         , 25         , 26         , 27         , 28         , 29         , 30         , 31         , 32        },
+//	{ 33       , 34         , 35         , 36         , 37         , 38         , 39         , 40         , 41         , 42         , 43         , 44         , 45         , 46         , 47         , 48         , 49        },
+//	{ 50       , 51         , 52         , 53         , 54         , 55         , 56         , 57         , 58         , 59         , 60         , 61         , 62         , NO_LED     , NO_LED     , NO_LED     , NO_LED    },
+//	{ 63       , NO_LED     , 64         , 65         , 66         , 67         , 68         , 69         , 70         , 71         , 72         , 73         , 74         , NO_LED     , NO_LED     , 75         , NO_LED    },
+//	{ 76       , 77         , 78         , NO_LED     , NO_LED     , NO_LED     , 79         , NO_LED     , NO_LED     , 80         , 81         , 82         , 83         , NO_LED     , 84         , 85         , 86        }
+//
+	{ 15       , 14         , 13         , 12         , 11         , 10         , 9          , 8          , 7          , 6          , 5          , 4          , 3          , NO_LED     , 2          , 1          , 0         },
+	{ 16       , 17         , 18         , 19         , 20         , 21         , 22         , 23         , 24         , 25         , 26         , 27         , 28         , 29         , 30         , 31         , 32        },
+	{ 49       , 48         , 47         , 46         , 45         , 44         , 43         , 42         , 41         , 40         , 39         , 38         , 37         , 36         , 35         , 34         , 33         },
+	{ 50       , 51         , 52         , 53         , 54         , 55         , 56         , 57         , 58         , 59         , 60         , 61         , 62         , NO_LED     , NO_LED     , NO_LED     , NO_LED    },
+	{ 75       , NO_LED     , 74         , 73         , 72         , 71         , 70         , 69         , 68         , 67         , 66         , 65         , 64         , NO_LED     , NO_LED     , 63         , NO_LED    },
+	{ 76       , 77         , 78         , NO_LED     , NO_LED     , NO_LED     , 79         , NO_LED     , NO_LED     , 80         , 81         , 82         , 83         , NO_LED     , 84         , 85         , 86        }
+},{
+// "Fine-tuned" complex configuration
+	{ 210,   0}, { 196,   0}, { 182,   0}, { 168,   0}, { 154,   0}, { 140,   0}, { 140,   0}, { 126,   0}, { 112,   0}, {  98,   0}, {  84,   0}, {  70,   0}, {  56,   0},              {  28,   0}, {  14,   0}, {   0,   0},
+	{   0,  45}, {  14,  45}, {  28,  45}, {  42,  45}, {  56,  45}, {  70,  45}, {  84,  45}, {  98,  45}, { 112,  45}, { 126,  45}, { 140,  45}, { 154,  45}, { 168,  45}, { 182,  45}, { 196,  45}, { 210,  45}, { 224,  45},
+	{ 224,  90}, { 210,  90}, { 196,  90}, { 182,  90}, { 168,  90}, { 154,  90}, { 140,  90}, { 126,  90}, { 112,  90}, {  98,  90}, {  84,  90}, {  70,  90}, {  56,  90}, {  42,  90}, {  28,  90}, {  14,  90}, {   0,  90},
+	{   0, 135}, {  14, 135}, {  28, 135}, {  42, 135}, {  56, 135}, {  70, 135}, {  84, 135}, {  98, 135}, { 112, 135}, { 126, 135}, { 140, 135}, { 154, 135}, { 168, 135},
+	{ 192, 180},              { 168, 180}, { 154, 180}, { 140, 180}, { 126, 180}, { 112, 180}, {  98, 180}, {  84, 180}, {  70, 180}, {  56, 180}, {  42, 180}, {  28, 180},                           {  14, 180},
+	{   0, 225}, {  14, 225}, {  28, 225},                                        {  84, 225},                           { 126, 225}, { 140, 225}, { 154, 225}, { 168, 225},              { 196,  45}, { 210,  45}, { 224,  90}
+// "Stock" simple configuration
+//	{ 224,   0}, { 210,   0}, { 196,   0}, { 182,   0}, { 168,   0}, { 154,   0}, { 140,   0}, { 126,   0}, { 112,   0}, {  98,   0}, {  84,   0}, {  70,   0}, {  56,   0},              {  28,   0}, {  14,   0}, {   0,   0},
+//	{   0,  45}, {  14,  45}, {  28,  45}, {  42,  45}, {  56,  45}, {  70,  45}, {  84,  45}, {  98,  45}, { 112,  45}, { 126,  45}, { 140,  45}, { 154,  45}, { 168,  45}, { 182,  45}, { 196,  45}, { 210,  45}, { 224,  45},
+//	{ 224,  90}, { 210,  90}, { 196,  90}, { 182,  90}, { 168,  90}, { 154,  90}, { 140,  90}, { 126,  90}, { 112,  90}, {  98,  90}, {  84,  90}, {  70,  90}, {  56,  90}, {  42,  90}, {  28,  90}, {  14,  90}, {   0,  90},
+//	{   0, 135}, {  14, 135}, {  28, 135}, {  42, 135}, {  56, 135}, {  70, 135}, {  84, 135}, {  98, 135}, { 112, 135}, { 126, 135}, { 140, 135}, { 154, 135}, { 168, 135},
+//	{ 224, 180},              { 196, 180}, { 182, 180}, { 168, 180}, { 154, 180}, { 140, 180}, { 126, 180}, { 112, 180}, {  98, 180}, {  84, 180}, {  70, 180}, {  56, 180},                           {  14, 180},
+//	{   0, 225}, {  14, 225}, {  28, 225},                                        {  84, 225},                           { 126, 225}, { 140, 225}, { 154, 225}, { 168, 225},              { 196,  45}, { 210,  45}, { 224,  90}
+}, {
+	1          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          ,              4          , 4          , 4          ,
+	4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 
+	4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          ,
+	4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 1          ,
+	1                       , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 4          , 1                                    , 1          ,
+	1          , 1          , 1          ,                                        4          ,                           1          , 1          , 1          , 1                       , 1          , 1          , 1          
+} };

keyboards/acheron/apollo/87h/delta/delta.h

@@ -0,0 +1,38 @@
+/*
+Copyright 2022 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT_tkl_ansi( \
+	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0E, K0F, K0G, \
+	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \
+	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,                     \
+	K40,      K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C,           K4F,      \
+        K50, K51, K52,                K56,           K59, K5A, K5B, K5C,      K5E, K5F, K5G  \
+) { \
+	{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, ___, K0E, K0F, K0G }, \
+	{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
+	{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \
+	{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, ___, ___, ___, ___ }, \
+	{ K40, ___, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, ___, ___, K4F, ___ }, \
+	{ K50, K51, K52, ___, ___, ___, K56, ___, ___, K59, K5A, K5B, K5C, ___, K5E, K5F, K5G } \
+}

keyboards/acheron/apollo/87h/delta/halconf.h

@@ -0,0 +1,24 @@
+/* Copyright 2022 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#define HAL_USE_PWM TRUE
+#define HAL_USE_PAL TRUE
+
+#include_next <halconf.h>

keyboards/acheron/apollo/87h/delta/keymaps/default/keymap.c

@@ -0,0 +1,53 @@
+/*
+Copyright 2020 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [0] = LAYOUT_tkl_ansi(
+        KC_ESC , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 ,          KC_PSCR, KC_SCRL, KC_PAUS , 
+        KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC, KC_INS , KC_HOME, KC_PGUP ,
+        KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_END , KC_PGDN ,
+        KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,
+	KC_LSFT,          KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,                   KC_UP  ,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                   KC_RALT, MO(1)  , KC_RGUI, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
+	),
+   [1] = LAYOUT_tkl_ansi(
+        QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS,          RGB_TOG, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS
+        ),
+   [2] = LAYOUT_tkl_ansi(
+        QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS
+        ),
+   [3] = LAYOUT_tkl_ansi(
+        QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS
+        )
+};