Update some changes for AT32F415 (#24766)

* Fixed SPI can't compiled issue

* Added solenoid support and use 256KB ldscript for Onekey board

.editorconfig

@@ -11,7 +11,8 @@ charset = utf-8
 trim_trailing_whitespace = true
 insert_final_newline = true
 
-[{*.yaml,*.yml}] # To match GitHub Actions formatting
+ # To match GitHub Actions formatting
+[*.{yaml,yml}]
 indent_size = 2
 
 [*.md]

.github/ISSUE_TEMPLATE/config.yml

@@ -1,7 +1,7 @@
 blank_issues_enabled: false
 contact_links:
   - name: QMK Discord
-    url: https://discord.gg/Uq7gcHh
+    url: https://discord.gg/qmk
     about: Ask questions, discuss issues and features. Chill.
   - name: OLKB Subreddit
     url: https://www.reddit.com/r/olkb

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,6 +1,5 @@
 <!--- Provide a general summary of your changes in the title above. -->
 
-<!--- This template is entirely optional and can be removed, but is here to help both you and us. -->
 <!--- Anything on lines wrapped in comments like these will not show up in the final text. -->
 
 ## Description
@@ -15,7 +14,7 @@
 - [ ] New feature
 - [ ] Enhancement/optimization
 - [ ] Keyboard (addition or update)
-- [ ] Keymap/layout/userspace (addition or update)
+- [ ] Keymap/layout (addition or update)
 - [ ] Documentation
 
 ## Issues Fixed or Closed by This PR

.github/labeler.yml

@@ -1,46 +1,56 @@
 core:
-  - quantum/**/*
-  - tmk_core/**/*
-  - drivers/**/*
-  - tests/**/*
-  - util/**/*
-  - platforms/**/*
-  - builddefs/**/*
-  - Makefile
-  - '*.mk'
+  - changed-files:
+    - any-glob-to-any-file:
+      - quantum/**
+      - tmk_core/**
+      - drivers/**
+      - tests/**
+      - util/**
+      - platforms/**
+      - builddefs/*.mk
+      - Makefile
+      - '*.mk'
 dependencies:
-  - any:
-    - 'lib/**/*'
-    - '!lib/python/**/*'
+  - changed-files:
+    - all-globs-to-any-file:
+      - lib/**
+      - '!lib/python/**'
 keyboard:
-  - any:
-    - 'keyboards/**/*'
-    - '!keyboards/**/keymaps/**/*'
+  - changed-files:
+    - all-globs-to-any-file:
+      - keyboards/**
+      - '!keyboards/**/keymaps/**'
 keymap:
-  - users/**/*
-  - layouts/**/*
-  - keyboards/**/keymaps/**/*
+  - changed-files:
+    - any-glob-to-any-file:
+      - users/**
+      - layouts/**
+      - keyboards/**/keymaps/**
 via:
-  - keyboards/**/keymaps/via/*
+  - changed-files:
+    - any-glob-to-any-file:
+      - keyboards/**/keymaps/via/*
 cli:
-  - requirements.txt
-  - lib/python/**/*
+  - changed-files:
+    - any-glob-to-any-file:
+      - requirements.txt
+      - lib/python/**
 python:
-  - '**/*.py'
+  - changed-files:
+    - any-glob-to-any-file:
+      - '**/*.py'
 documentation:
-  - docs/**/*
-translation:
-  - docs/fr-fr/**/*
-  - docs/es/**/*
-  - docs/ja/**/*
-  - docs/he-il/**/*
-  - docs/pt-br/**/*
-  - docs/zh-cn/**/*
-  - docs/de/**/*
-  - docs/ru-ru/**/*
+  - changed-files:
+    - any-glob-to-any-file:
+      - docs/**
+      - builddefs/docsgen/**
 CI:
-  - .github/**/*
+  - changed-files:
+    - any-glob-to-any-file:
+      - .github/**
 dd:
-  - data/constants/**/*
-  - data/mappings/**/*
-  - data/schemas/**/*
+  - changed-files:
+    - any-glob-to-any-file:
+      - data/constants/**
+      - data/mappings/**
+      - data/schemas/**

.github/workflows/auto_approve.yml

@@ -13,8 +13,8 @@ jobs:
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
-    - uses: mheap/automatic-approve-action@v1
+    - uses: zvecr/automatic-approve-action@safe_files
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}
-        workflows: "format.yml,lint.yml,unit_test.yml"
-        dangerous_files: "lib/python/,Makefile,paths.mk,builddefs/"
+        workflows: "labeler.yml,lint.yml,docs.yml"
+        safe_files: "keyboards/,docs/"

.github/workflows/ci_build_major_branch.yml

@@ -52,9 +52,9 @@ jobs:
         run: |
           target_count=$( {
             qmk find -km default 2>/dev/null
-            qmk find -km via 2>/dev/null
+            # qmk find -km xap 2>/dev/null
           } | sort | uniq | wc -l)
-          slice_length=$((target_count / ($CONCURRENT_JOBS - 1))) # Err on the side of caution as we're splitting default and via
+          slice_length=$((target_count / ($CONCURRENT_JOBS - 1))) # Err on the side of caution
           echo "slice_length=$slice_length" >> $GITHUB_OUTPUT
 
   build_targets:
@@ -63,7 +63,8 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        keymap: [default, via]
+        keymap: [default]
+        # keymap: [default, xap]
     uses: ./.github/workflows/ci_build_major_branch_keymap.yml
     with:
       branch: ${{ inputs.branch || github.ref_name }}
@@ -77,44 +78,59 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
+      - name: Disable safe.directory check
+        run: |
+          git config --global --add safe.directory '*'
+
+      - name: Checkout QMK Firmware
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
       - name: Download firmwares
         uses: actions/download-artifact@v4
         with:
           pattern: firmware-*
-          path: firmwares
+          path: .
           merge-multiple: true
 
+      - name: Generate index page
+        run: |
+          python3 -m pip install -r ./util/ci/requirements.txt
+          ./util/ci/index_generator.py > index.html
+          ./util/ci/firmware_list_generator.py > firmware_list.json
+
       - name: Upload to https://ci.qmk.fm/${{ inputs.branch || github.ref_name }}/${{ github.sha }}
         uses: jakejarvis/s3-sync-action@master
         with:
-          args: --acl public-read --follow-symlinks --delete
+          args: --acl public-read --follow-symlinks --delete --exclude '*' --include 'index.html' --include 'firmware_list.json' --include '*.hex' --include '*.bin' --include '*.uf2'
         env:
           AWS_S3_BUCKET: ${{ vars.CI_QMK_FM_SPACES_BUCKET }}
           AWS_ACCESS_KEY_ID: ${{ secrets.CI_QMK_FM_SPACES_KEY }}
           AWS_SECRET_ACCESS_KEY: ${{ secrets.CI_QMK_FM_SPACES_SECRET }}
           AWS_REGION: ${{ vars.CI_QMK_FM_SPACES_REGION }}
           AWS_S3_ENDPOINT: ${{ vars.CI_QMK_FM_SPACES_ENDPOINT }}
-          SOURCE_DIR: firmwares
+          SOURCE_DIR: .
           DEST_DIR: ${{ inputs.branch || github.ref_name }}/${{ github.sha }}
 
       - name: Upload to https://ci.qmk.fm/${{ inputs.branch || github.ref_name }}/latest
         uses: jakejarvis/s3-sync-action@master
         with:
-          args: --acl public-read --follow-symlinks --delete
+          args: --acl public-read --follow-symlinks --delete --exclude '*' --include 'index.html' --include 'firmware_list.json' --include '*.hex' --include '*.bin' --include '*.uf2'
         env:
           AWS_S3_BUCKET: ${{ vars.CI_QMK_FM_SPACES_BUCKET }}
           AWS_ACCESS_KEY_ID: ${{ secrets.CI_QMK_FM_SPACES_KEY }}
           AWS_SECRET_ACCESS_KEY: ${{ secrets.CI_QMK_FM_SPACES_SECRET }}
           AWS_REGION: ${{ vars.CI_QMK_FM_SPACES_REGION }}
           AWS_S3_ENDPOINT: ${{ vars.CI_QMK_FM_SPACES_ENDPOINT }}
-          SOURCE_DIR: firmwares
+          SOURCE_DIR: .
           DEST_DIR: ${{ inputs.branch || github.ref_name }}/latest
 
       - name: Check if failure marker file exists
         id: check_failure_marker
         uses: andstor/file-existence-action@v3
         with:
-          files: firmwares/.failed
+          files: ./.failed
 
       - name: Fail build if needed
         if: steps.check_failure_marker.outputs.files_exists == 'true'

.github/workflows/ci_build_major_branch_keymap.yml

@@ -172,10 +172,10 @@ jobs:
             targets-${{ inputs.keymap }}
 
       - name: 'CI Discord Notification'
-        if: always()
+        if: always() && !cancelled()
         working-directory: util/ci/
         env:
           DISCORD_WEBHOOK: ${{ secrets.CI_DISCORD_WEBHOOK }}
         run: |
           python3 -m pip install -r requirements.txt
-          python3 ./discord-results.py --branch ${{ inputs.branch || github.ref_name }} --keymap ${{ inputs.keymap }} --url ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}
+          python3 ./discord-results.py --branch ${{ inputs.branch || github.ref_name }} --sha $(git rev-parse HEAD) --keymap ${{ inputs.keymap }} --url ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}

.github/workflows/docs.yml

@@ -56,7 +56,7 @@ jobs:
 
     - name: Deploy
       if: ${{ github.event_name == 'push' && github.repository == 'qmk/qmk_firmware' }}
-      uses: JamesIves/github-pages-deploy-action@v4.6.1
+      uses: JamesIves/github-pages-deploy-action@v4.7.2
       with:
           token: ${{ secrets.GITHUB_TOKEN }}
           branch: gh-pages

.github/workflows/format.yml

@@ -35,7 +35,7 @@ jobs:
 
     - name: Get changed files
       id: file_changes
-      uses: tj-actions/changed-files@v44
+      uses: tj-actions/changed-files@v45
       with:
         use_rest_api: true
 

.github/workflows/format_push.yml

@@ -47,7 +47,7 @@ jobs:
         git config user.email 'hello@qmk.fm'
 
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v6
+      uses: peter-evans/create-pull-request@v7
       if: ${{ github.repository == 'qmk/qmk_firmware'}}
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}

.github/workflows/labeler.yml

@@ -1,18 +1,13 @@
 name: "Pull Request Labeler"
 
-permissions:
-  contents: read
-  pull-requests: write
-
 on:
-  pull_request_target:
-    types: [opened, synchronize, reopened, ready_for_review, locked]
+- pull_request_target
 
 jobs:
   triage:
+    permissions:
+      contents: read
+      pull-requests: write
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/labeler@v4
-      with:
-        repo-token: "${{ secrets.GITHUB_TOKEN }}"
-        configuration-path: '.github/labeler.yml'
+    - uses: actions/labeler@v5

.github/workflows/lint.yml

@@ -27,7 +27,7 @@ jobs:
 
     - name: Get changed files
       id: file_changes
-      uses: tj-actions/changed-files@v44
+      uses: tj-actions/changed-files@v45
       with:
         use_rest_api: true
 

.github/workflows/regen_push.yml

@@ -34,7 +34,7 @@ jobs:
         git config user.email 'hello@qmk.fm'
 
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v6
+      uses: peter-evans/create-pull-request@v7
       if: ${{ github.repository == 'qmk/qmk_firmware'}}
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}

.gitignore

@@ -25,6 +25,8 @@
 *.la
 *.stackdump
 *.sym
+index.html
+firmware_list.json
 
 # QMK-specific
 api_data/v1
@@ -116,4 +118,5 @@ compile_commands.json
 
 # VIA(L) files that don't belong in QMK repo
 via*.json
+/keyboards/**/keymaps/via/*
 /keyboards/**/keymaps/vial/*

Doxyfile

@@ -145,7 +145,7 @@ FILE_PATTERNS          = *.c \
 RECURSIVE              = YES
 EXCLUDE                =
 EXCLUDE_SYMLINKS       = NO
-EXCLUDE_PATTERNS       = */protocol/arm_atsam/*
+EXCLUDE_PATTERNS       =
 EXCLUDE_SYMBOLS        =
 EXAMPLE_PATH           =
 EXAMPLE_PATTERNS       = *

builddefs/build_full_test.mk

@@ -21,8 +21,10 @@ $(TEST_OUTPUT)_SRC := \
 	$(SRC) \
 	$(QUANTUM_PATH)/keymap_introspection.c \
 	tests/test_common/matrix.c \
+	tests/test_common/pointing_device_driver.c \
 	tests/test_common/test_driver.cpp \
 	tests/test_common/keyboard_report_util.cpp \
+	tests/test_common/mouse_report_util.cpp \
 	tests/test_common/keycode_util.cpp \
 	tests/test_common/keycode_table.cpp \
 	tests/test_common/test_fixture.cpp \

builddefs/build_keyboard.mk

@@ -34,10 +34,13 @@ ifeq ($(strip $(DUMP_CI_METADATA)),yes)
 endif
 
 # Force expansion
-TARGET := $(TARGET)
+override TARGET := $(TARGET)
 
 ifneq ($(FORCE_LAYOUT),)
-    TARGET := $(TARGET)_$(FORCE_LAYOUT)
+    override TARGET := $(TARGET)_$(FORCE_LAYOUT)
+endif
+ifneq ($(CONVERT_TO),)
+    override TARGET := $(TARGET)_$(CONVERT_TO)
 endif
 
 # Object files and generated keymap directory
@@ -58,9 +61,6 @@ ifdef SKIP_GIT
 VERSION_H_FLAGS += --skip-git
 endif
 
-# Generate the board's version.h file.
-$(shell $(QMK_BIN) generate-version-h $(VERSION_H_FLAGS) -q -o $(INTERMEDIATE_OUTPUT)/src/version.h)
-
 # Determine which subfolders exist.
 KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
 KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
@@ -186,7 +186,10 @@ endif
 # Have we found a keymap.json?
 ifneq ("$(wildcard $(KEYMAP_JSON))", "")
     ifneq ("$(wildcard $(KEYMAP_C))", "")
-        $(call WARNING_MESSAGE,Keymap is specified as both keymap.json and keymap.c -- keymap.json file wins.)
+        # Allow a separately-found keymap.c next to keymap.json -- the keymap.c
+        # generator will include the other keymap.c in the process, if supplied.
+        OTHER_KEYMAP_C := $(KEYMAP_C)
+        OPT_DEFS += -DOTHER_KEYMAP_C=\"$(OTHER_KEYMAP_C)\"
     endif
 
     KEYMAP_PATH := $(KEYMAP_JSON_PATH)
@@ -194,8 +197,10 @@ ifneq ("$(wildcard $(KEYMAP_JSON))", "")
     KEYMAP_C := $(INTERMEDIATE_OUTPUT)/src/keymap.c
     KEYMAP_H := $(INTERMEDIATE_OUTPUT)/src/config.h
 
-    # Load the keymap-level rules.mk if exists
-    -include $(KEYMAP_PATH)/rules.mk
+    ifeq ($(OTHER_KEYMAP_C),)
+        # Load the keymap-level rules.mk if exists (and we havent already loaded it for keymap.c)
+        -include $(KEYMAP_PATH)/rules.mk
+    endif
 
     # Load any rules.mk content from keymap.json
     INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --output $(INTERMEDIATE_OUTPUT)/src/rules.mk $(KEYMAP_JSON))
@@ -212,12 +217,20 @@ $(INTERMEDIATE_OUTPUT)/src/config.h: $(KEYMAP_JSON)
 	$(eval CMD=$(QMK_BIN) generate-config-h --quiet --output $(KEYMAP_H) $(KEYMAP_JSON))
 	@$(BUILD_CMD)
 
-generated-files: $(INTERMEDIATE_OUTPUT)/src/config.h $(INTERMEDIATE_OUTPUT)/src/keymap.c
+$(INTERMEDIATE_OUTPUT)/src/keymap.h: $(KEYMAP_JSON)
+	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
+	$(eval CMD=$(QMK_BIN) generate-keymap-h --quiet --output $(INTERMEDIATE_OUTPUT)/src/keymap.h $(KEYMAP_JSON))
+	@$(BUILD_CMD)
+
+generated-files: $(INTERMEDIATE_OUTPUT)/src/config.h $(INTERMEDIATE_OUTPUT)/src/keymap.c $(INTERMEDIATE_OUTPUT)/src/keymap.h
 
 endif
 
 include $(BUILDDEFS_PATH)/converters.mk
 
+# Generate the board's version.h file.
+$(shell $(QMK_BIN) generate-version-h $(VERSION_H_FLAGS) -q -o $(INTERMEDIATE_OUTPUT)/src/version.h)
+
 MCU_ORIG := $(MCU)
 include $(wildcard $(PLATFORM_PATH)/*/mcu_selection.mk)
 

builddefs/build_test.mk

@@ -47,7 +47,8 @@ PLATFORM:=TEST
 PLATFORM_KEY:=test
 BOOTLOADER_TYPE:=none
 
-ifeq ($(strip $(DEBUG)), 1)
+DEBUG ?= 0
+ifneq ($(strip $(DEBUG)), 0)
 CONSOLE_ENABLE = yes
 endif
 

builddefs/common_features.mk

@@ -28,6 +28,7 @@ QUANTUM_SRC += \
     $(QUANTUM_DIR)/sync_timer.c \
     $(QUANTUM_DIR)/logging/debug.c \
     $(QUANTUM_DIR)/logging/sendchar.c \
+    $(QUANTUM_DIR)/process_keycode/process_default_layer.c \
 
 VPATH += $(QUANTUM_DIR)/logging
 # Fall back to lib/printf if there is no platform provided print
@@ -129,13 +130,13 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
         MOUSE_ENABLE := yes
         VPATH += $(QUANTUM_DIR)/pointing_device
         SRC += $(QUANTUM_DIR)/pointing_device/pointing_device.c
-        SRC += $(QUANTUM_DIR)/pointing_device/pointing_device_drivers.c
         SRC += $(QUANTUM_DIR)/pointing_device/pointing_device_auto_mouse.c
         ifneq ($(strip $(POINTING_DEVICE_DRIVER)), custom)
             SRC += drivers/sensors/$(strip $(POINTING_DEVICE_DRIVER)).c
             OPT_DEFS += -DPOINTING_DEVICE_DRIVER_$(strip $(shell echo $(POINTING_DEVICE_DRIVER) | tr '[:lower:]' '[:upper:]'))
         endif
         OPT_DEFS += -DPOINTING_DEVICE_DRIVER_$(strip $(POINTING_DEVICE_DRIVER))
+        OPT_DEFS += -DPOINTING_DEVICE_DRIVER_NAME=$(strip $(POINTING_DEVICE_DRIVER))
         ifeq ($(strip $(POINTING_DEVICE_DRIVER)), adns9800)
             SPI_DRIVER_REQUIRED = yes
         else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), analog_joystick)
@@ -215,7 +216,7 @@ else
         COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/flash
         COMMON_VPATH += $(DRIVER_PATH)/flash
         SRC += eeprom_driver.c eeprom_legacy_emulated_flash.c legacy_flash_ops.c
-      else ifneq ($(filter $(MCU_SERIES),STM32F1xx STM32F3xx STM32F4xx STM32L4xx STM32G4xx WB32F3G71xx WB32FQ95xx GD32VF103),)
+      else ifneq ($(filter $(MCU_SERIES),STM32F1xx STM32F3xx STM32F4xx STM32L4xx STM32G4xx WB32F3G71xx WB32FQ95xx AT32F415 GD32VF103),)
         # Wear-leveling EEPROM implementation, backed by MCU flash
         OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_WEAR_LEVELING
         SRC += eeprom_driver.c eeprom_wear_leveling.c
@@ -238,10 +239,6 @@ else
         OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
         SRC += eeprom_driver.c eeprom_transient.c
       endif
-    else ifeq ($(PLATFORM),ARM_ATSAM)
-      # arm_atsam EEPROM
-      OPT_DEFS += -DEEPROM_SAMD
-      SRC += eeprom_samd.c
     else ifeq ($(PLATFORM),TEST)
       # Test harness "EEPROM"
       OPT_DEFS += -DEEPROM_TEST_HARNESS
@@ -282,18 +279,17 @@ ifneq ($(strip $(WEAR_LEVELING_DRIVER)),none)
   endif
 endif
 
-VALID_FLASH_DRIVER_TYPES := spi
+VALID_FLASH_DRIVER_TYPES := spi custom
 FLASH_DRIVER ?= none
 ifneq ($(strip $(FLASH_DRIVER)), none)
     ifeq ($(filter $(FLASH_DRIVER),$(VALID_FLASH_DRIVER_TYPES)),)
         $(call CATASTROPHIC_ERROR,Invalid FLASH_DRIVER,FLASH_DRIVER="$(FLASH_DRIVER)" is not a valid flash driver)
     else
-        OPT_DEFS += -DFLASH_ENABLE
+        OPT_DEFS += -DFLASH_ENABLE -DFLASH_DRIVER -DFLASH_DRIVER_$(strip $(shell echo $(FLASH_DRIVER) | tr '[:lower:]' '[:upper:]'))
+		COMMON_VPATH += $(DRIVER_PATH)/flash
         ifeq ($(strip $(FLASH_DRIVER)),spi)
-            SPI_DRIVER_REQUIRED = yes
-            OPT_DEFS += -DFLASH_DRIVER -DFLASH_SPI
-            COMMON_VPATH += $(DRIVER_PATH)/flash
             SRC += flash_spi.c
+            SPI_DRIVER_REQUIRED = yes
         endif
     endif
 endif
@@ -311,11 +307,11 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
         POST_CONFIG_H += $(QUANTUM_DIR)/rgblight/rgblight_post_config.h
         OPT_DEFS += -DRGBLIGHT_ENABLE
         OPT_DEFS += -DRGBLIGHT_$(strip $(shell echo $(RGBLIGHT_DRIVER) | tr '[:lower:]' '[:upper:]'))
+        SRC += $(QUANTUM_DIR)/process_keycode/process_underglow.c
         SRC += $(QUANTUM_DIR)/color.c
         SRC += $(QUANTUM_DIR)/rgblight/rgblight.c
         SRC += $(QUANTUM_DIR)/rgblight/rgblight_drivers.c
         CIE1931_CURVE := yes
-        RGB_KEYCODES_ENABLE := yes
     endif
 
     ifeq ($(strip $(RGBLIGHT_DRIVER)), ws2812)
@@ -437,6 +433,13 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
         SRC += snled27351-mono.c
     endif
 
+    ifeq ($(strip $(LED_MATRIX_CUSTOM_KB)), yes)
+        OPT_DEFS += -DLED_MATRIX_CUSTOM_KB
+    endif
+
+    ifeq ($(strip $(LED_MATRIX_CUSTOM_USER)), yes)
+        OPT_DEFS += -DLED_MATRIX_CUSTOM_USER
+    endif
 endif
 
 # Deprecated driver names - do not use
@@ -461,12 +464,16 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
     COMMON_VPATH += $(QUANTUM_DIR)/rgb_matrix/animations
     COMMON_VPATH += $(QUANTUM_DIR)/rgb_matrix/animations/runners
     POST_CONFIG_H += $(QUANTUM_DIR)/rgb_matrix/post_config.h
+
+    # TODO: Remove this
+    SRC += $(QUANTUM_DIR)/process_keycode/process_underglow.c
+
+    SRC += $(QUANTUM_DIR)/process_keycode/process_rgb_matrix.c
     SRC += $(QUANTUM_DIR)/color.c
     SRC += $(QUANTUM_DIR)/rgb_matrix/rgb_matrix.c
     SRC += $(QUANTUM_DIR)/rgb_matrix/rgb_matrix_drivers.c
     LIB8TION_ENABLE := yes
     CIE1931_CURVE := yes
-    RGB_KEYCODES_ENABLE := yes
 
     ifeq ($(strip $(RGB_MATRIX_DRIVER)), aw20216s)
         SPI_DRIVER_REQUIRED = yes
@@ -569,10 +576,6 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
     endif
 endif
 
-ifeq ($(strip $(RGB_KEYCODES_ENABLE)), yes)
-    SRC += $(QUANTUM_DIR)/process_keycode/process_rgb.c
-endif
-
 VARIABLE_TRACE ?= no
 ifneq ($(strip $(VARIABLE_TRACE)),no)
     SRC += $(QUANTUM_DIR)/variable_trace.c
@@ -882,7 +885,7 @@ ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
     OPT_DEFS += -DBLUETOOTH_$(strip $(shell echo $(BLUETOOTH_DRIVER) | tr '[:lower:]' '[:upper:]'))
     NO_USB_STARTUP_CHECK := yes
     COMMON_VPATH += $(DRIVER_PATH)/bluetooth
-    SRC += outputselect.c
+    SRC += outputselect.c process_connection.c
 
     ifeq ($(strip $(BLUETOOTH_DRIVER)), bluefruit_le)
         SPI_DRIVER_REQUIRED = yes
@@ -937,7 +940,7 @@ ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
 
     OPT_DEFS += -DWS2812_$(strip $(shell echo $(WS2812_DRIVER) | tr '[:lower:]' '[:upper:]'))
 
-    SRC += ws2812_$(strip $(WS2812_DRIVER)).c
+    SRC += ws2812.c ws2812_$(strip $(WS2812_DRIVER)).c
 
     ifeq ($(strip $(PLATFORM)), CHIBIOS)
         ifeq ($(strip $(WS2812_DRIVER)), pwm)

builddefs/common_rules.mk

@@ -43,25 +43,25 @@ ifneq ($(USE_CCACHE),no)
     CC_PREFIX ?= ccache
 endif
 
+#---------------- Debug Options ----------------
+
+DEBUG_ENABLE ?= no
+ifeq ($(strip $(DEBUG_ENABLE)),yes)
+	CFLAGS 	 += -ggdb3
+	CXXFLAGS += -ggdb3
+	ASFLAGS  += -ggdb3
+# Create a map file when debugging
+	LDFLAGS  += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
+endif
+
+
 #---------------- C Compiler Options ----------------
 
 ifeq ($(strip $(LTO_ENABLE)), yes)
-    ifeq ($(PLATFORM),ARM_ATSAM)
-        $(info Enabling LTO on arm_atsam-targeting boards is known to have a high likelihood of failure.)
-        $(info If unsure, set LTO_ENABLE = no.)
-    endif
     CDEFS += -flto
     CDEFS += -DLTO_ENABLE
 endif
 
-DEBUG_ENABLE ?= yes
-ifeq ($(strip $(SKIP_DEBUG_INFO)),yes)
-  DEBUG_ENABLE=no
-endif
-
-ifeq ($(strip $(DEBUG_ENABLE)),yes)
-  CFLAGS += -g$(DEBUG)
-endif
 CFLAGS += $(CDEFS)
 CFLAGS += -O$(OPT)
 # add color
@@ -83,9 +83,6 @@ CFLAGS += -fcommon
 
 #---------------- C++ Compiler Options ----------------
 
-ifeq ($(strip $(DEBUG_ENABLE)),yes)
-  CXXFLAGS += -g$(DEBUG)
-endif
 CXXFLAGS += $(CXXDEFS)
 CXXFLAGS += -O$(OPT)
 # to suppress "warning: only initialized variables can be placed into program memory area"
@@ -106,14 +103,10 @@ endif
 
 #---------------- Linker Options ----------------
 
-CREATE_MAP ?= yes
-ifeq ($(CREATE_MAP),yes)
-	LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
-endif
 ifeq ($(VERBOSE_LD_CMD),yes)
 	LDFLAGS += -v
 endif
-#LDFLAGS += -Wl,--relax
+
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += -lm
@@ -126,15 +119,11 @@ ADHLNS_ENABLE ?= no
 ifeq ($(ADHLNS_ENABLE),yes)
   # Avoid "Options to '-Xassembler' do not match" - only specify assembler options at LTO link time
   ifeq ($(strip $(LTO_ENABLE)), yes)
-    LDFLAGS += -Wa,-adhlns=$(BUILD_DIR)/$(TARGET).lst
+    LDFLAGS  += -Wa,-adhlns=$(BUILD_DIR)/$(TARGET).lst
   else
-    CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst)
+    CFLAGS   += -Wa,-adhlns=$(@:%.o=%.lst)
     CXXFLAGS += -Wa,-adhlns=$(@:%.o=%.lst)
-    ifeq ($(strip $(DEBUG_ENABLE)),yes)
-      ASFLAGS = -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
-    else
-      ASFLAGS = -Wa,-adhlns=$(@:%.o=%.lst),--listing-cont-lines=100
-    endif
+	ASFLAGS  += -Wa,-adhlns=$(@:%.o=%.lst),--listing-cont-lines=100
   endif
 endif
 

builddefs/converters.mk

@@ -32,9 +32,6 @@ ifneq ($(CONVERT_TO),)
 
     PLATFORM_KEY = $(shell echo $(CONVERTER) | cut -d "/" -f2)
 
-    # force setting as value can be from environment
-    override TARGET := $(TARGET)_$(CONVERT_TO)
-
     # Configure any defaults
     OPT_DEFS += -DCONVERT_TO_$(shell echo $(CONVERT_TO) | tr '[:lower:]' '[:upper:]')
     OPT_DEFS += -DCONVERTER_TARGET=\"$(CONVERT_TO)\"

builddefs/docsgen/.vitepress/config.mts

@@ -33,14 +33,21 @@ export default defineConfig(({ mode }) => {
             },
             title: 'QMK Firmware',
 
-            nav: [{ text: "Home", link: "./" }],
+            nav: [{ text: "Home", link: "/" }],
 
             search: {
                 provider: "local",
             },
 
+            editLink: {
+                pattern: 'https://github.com/qmk/qmk_firmware/edit/master/docs/:path'
+            },
+            lastUpdated: true,
+
             sidebar: sidebar,
 
+            externalLinkIcon: true,
+
             socialLinks: [
                 { icon: { svg: '<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 50 50" width="50px" height="50px"><path d="M 29 3 C 28.0625 3 27.164063 3.382813 26.5 4 C 25.835938 4.617188 25.363281 5.433594 25 6.40625 C 24.355469 8.140625 24.085938 10.394531 24.03125 13.03125 C 19.234375 13.179688 14.820313 14.421875 11.28125 16.46875 C 10.214844 15.46875 8.855469 14.96875 7.5 14.96875 C 6.089844 14.96875 4.675781 15.511719 3.59375 16.59375 C 1.425781 18.761719 1.425781 22.238281 3.59375 24.40625 L 3.84375 24.65625 C 3.3125 26.035156 3 27.488281 3 29 C 3 33.527344 5.566406 37.585938 9.5625 40.4375 C 13.558594 43.289063 19.007813 45 25 45 C 30.992188 45 36.441406 43.289063 40.4375 40.4375 C 44.433594 37.585938 47 33.527344 47 29 C 47 27.488281 46.6875 26.035156 46.15625 24.65625 L 46.40625 24.40625 C 48.574219 22.238281 48.574219 18.761719 46.40625 16.59375 C 45.324219 15.511719 43.910156 14.96875 42.5 14.96875 C 41.144531 14.96875 39.785156 15.46875 38.71875 16.46875 C 35.195313 14.433594 30.800781 13.191406 26.03125 13.03125 C 26.09375 10.546875 26.363281 8.46875 26.875 7.09375 C 27.164063 6.316406 27.527344 5.757813 27.875 5.4375 C 28.222656 5.117188 28.539063 5 29 5 C 29.460938 5 29.683594 5.125 30.03125 5.40625 C 30.378906 5.6875 30.785156 6.148438 31.3125 6.6875 C 32.253906 7.652344 33.695313 8.714844 36.09375 8.9375 C 36.539063 11.238281 38.574219 13 41 13 C 43.75 13 46 10.75 46 8 C 46 5.25 43.75 3 41 3 C 38.605469 3 36.574219 4.710938 36.09375 6.96875 C 34.3125 6.796875 33.527344 6.109375 32.75 5.3125 C 32.300781 4.851563 31.886719 4.3125 31.3125 3.84375 C 30.738281 3.375 29.9375 3 29 3 Z M 41 5 C 42.667969 5 44 6.332031 44 8 C 44 9.667969 42.667969 11 41 11 C 39.332031 11 38 9.667969 38 8 C 38 6.332031 39.332031 5 41 5 Z M 25 15 C 30.609375 15 35.675781 16.613281 39.28125 19.1875 C 42.886719 21.761719 45 25.226563 45 29 C 45 32.773438 42.886719 36.238281 39.28125 38.8125 C 35.675781 41.386719 30.609375 43 25 43 C 19.390625 43 14.324219 41.386719 10.71875 38.8125 C 7.113281 36.238281 5 32.773438 5 29 C 5 25.226563 7.113281 21.761719 10.71875 19.1875 C 14.324219 16.613281 19.390625 15 25 15 Z M 7.5 16.9375 C 8.203125 16.9375 8.914063 17.148438 9.53125 17.59375 C 7.527344 19.03125 5.886719 20.769531 4.75 22.71875 C 3.582031 21.296875 3.660156 19.339844 5 18 C 5.714844 17.285156 6.609375 16.9375 7.5 16.9375 Z M 42.5 16.9375 C 43.390625 16.9375 44.285156 17.285156 45 18 C 46.339844 19.339844 46.417969 21.296875 45.25 22.71875 C 44.113281 20.769531 42.472656 19.03125 40.46875 17.59375 C 41.085938 17.148438 41.796875 16.9375 42.5 16.9375 Z M 17 22 C 14.800781 22 13 23.800781 13 26 C 13 28.199219 14.800781 30 17 30 C 19.199219 30 21 28.199219 21 26 C 21 23.800781 19.199219 22 17 22 Z M 33 22 C 30.800781 22 29 23.800781 29 26 C 29 28.199219 30.800781 30 33 30 C 35.199219 30 37 28.199219 37 26 C 37 23.800781 35.199219 22 33 22 Z M 17 24 C 18.117188 24 19 24.882813 19 26 C 19 27.117188 18.117188 28 17 28 C 15.882813 28 15 27.117188 15 26 C 15 24.882813 15.882813 24 17 24 Z M 33 24 C 34.117188 24 35 24.882813 35 26 C 35 27.117188 34.117188 28 33 28 C 31.882813 28 31 27.117188 31 26 C 31 24.882813 31.882813 24 33 24 Z M 34.15625 33.84375 C 34.101563 33.851563 34.050781 33.859375 34 33.875 C 33.683594 33.9375 33.417969 34.144531 33.28125 34.4375 C 33.28125 34.4375 32.757813 35.164063 31.4375 36 C 30.117188 36.835938 28.058594 37.6875 25 37.6875 C 21.941406 37.6875 19.882813 36.835938 18.5625 36 C 17.242188 35.164063 16.71875 34.4375 16.71875 34.4375 C 16.492188 34.082031 16.066406 33.90625 15.65625 34 C 15.332031 34.082031 15.070313 34.316406 14.957031 34.632813 C 14.84375 34.945313 14.894531 35.292969 15.09375 35.5625 C 15.09375 35.5625 15.863281 36.671875 17.46875 37.6875 C 19.074219 38.703125 21.558594 39.6875 25 39.6875 C 28.441406 39.6875 30.925781 38.703125 32.53125 37.6875 C 34.136719 36.671875 34.90625 35.5625 34.90625 35.5625 C 35.207031 35.273438 35.296875 34.824219 35.128906 34.441406 C 34.960938 34.058594 34.574219 33.820313 34.15625 33.84375 Z"/></svg>' }, link: "https://reddit.com/r/olkb" },
                 { icon: "discord", link: "https://discord.gg/qmk" },

builddefs/docsgen/package.json

@@ -1,7 +1,7 @@
 {
   "license": "GPL-2.0-or-later",
   "devDependencies": {
-    "vite": "^5.2.10",
+    "vite": "^5.2.14",
     "vitepress": "^1.1.0",
     "vitepress-plugin-tabs": "^0.5.0",
     "vue": "^3.4.24"

builddefs/docsgen/yarn.lock

@@ -298,85 +298,85 @@
   resolved "https://registry.yarnpkg.com/@jridgewell/sourcemap-codec/-/sourcemap-codec-1.4.15.tgz#d7c6e6755c78567a951e04ab52ef0fd26de59f32"
   integrity sha512-eF2rxCRulEKXHTRiDrDy6erMYWqNw4LPdQ8UQA4huuxaQsVeRPFl2oM8oDGxMFhJUWZf9McpLtJasDDZb/Bpeg==
 
-"@rollup/rollup-android-arm-eabi@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-android-arm-eabi/-/rollup-android-arm-eabi-4.16.4.tgz#5e8930291f1e5ead7fb1171d53ba5c87718de062"
-  integrity sha512-GkhjAaQ8oUTOKE4g4gsZ0u8K/IHU1+2WQSgS1TwTcYvL+sjbaQjNHFXbOJ6kgqGHIO1DfUhI/Sphi9GkRT9K+Q==
+"@rollup/rollup-android-arm-eabi@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-android-arm-eabi/-/rollup-android-arm-eabi-4.22.4.tgz#8b613b9725e8f9479d142970b106b6ae878610d5"
+  integrity sha512-Fxamp4aEZnfPOcGA8KSNEohV8hX7zVHOemC8jVBoBUHu5zpJK/Eu3uJwt6BMgy9fkvzxDaurgj96F/NiLukF2w==
 
-"@rollup/rollup-android-arm64@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-android-arm64/-/rollup-android-arm64-4.16.4.tgz#ffb84f1359c04ec8a022a97110e18a5600f5f638"
-  integrity sha512-Bvm6D+NPbGMQOcxvS1zUl8H7DWlywSXsphAeOnVeiZLQ+0J6Is8T7SrjGTH29KtYkiY9vld8ZnpV3G2EPbom+w==
+"@rollup/rollup-android-arm64@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-android-arm64/-/rollup-android-arm64-4.22.4.tgz#654ca1049189132ff602bfcf8df14c18da1f15fb"
+  integrity sha512-VXoK5UMrgECLYaMuGuVTOx5kcuap1Jm8g/M83RnCHBKOqvPPmROFJGQaZhGccnsFtfXQ3XYa4/jMCJvZnbJBdA==
 
-"@rollup/rollup-darwin-arm64@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-darwin-arm64/-/rollup-darwin-arm64-4.16.4.tgz#b2fcee8d4806a0b1b9185ac038cc428ddedce9f4"
-  integrity sha512-i5d64MlnYBO9EkCOGe5vPR/EeDwjnKOGGdd7zKFhU5y8haKhQZTN2DgVtpODDMxUr4t2K90wTUJg7ilgND6bXw==
+"@rollup/rollup-darwin-arm64@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-darwin-arm64/-/rollup-darwin-arm64-4.22.4.tgz#6d241d099d1518ef0c2205d96b3fa52e0fe1954b"
+  integrity sha512-xMM9ORBqu81jyMKCDP+SZDhnX2QEVQzTcC6G18KlTQEzWK8r/oNZtKuZaCcHhnsa6fEeOBionoyl5JsAbE/36Q==
 
-"@rollup/rollup-darwin-x64@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-darwin-x64/-/rollup-darwin-x64-4.16.4.tgz#fcb25ccbaa3dd33a6490e9d1c64bab2e0e16b932"
-  integrity sha512-WZupV1+CdUYehaZqjaFTClJI72fjJEgTXdf4NbW69I9XyvdmztUExBtcI2yIIU6hJtYvtwS6pkTkHJz+k08mAQ==
+"@rollup/rollup-darwin-x64@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-darwin-x64/-/rollup-darwin-x64-4.22.4.tgz#42bd19d292a57ee11734c980c4650de26b457791"
+  integrity sha512-aJJyYKQwbHuhTUrjWjxEvGnNNBCnmpHDvrb8JFDbeSH3m2XdHcxDd3jthAzvmoI8w/kSjd2y0udT+4okADsZIw==
 
-"@rollup/rollup-linux-arm-gnueabihf@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm-gnueabihf/-/rollup-linux-arm-gnueabihf-4.16.4.tgz#40d46bdfe667e5eca31bf40047460e326d2e26bb"
-  integrity sha512-ADm/xt86JUnmAfA9mBqFcRp//RVRt1ohGOYF6yL+IFCYqOBNwy5lbEK05xTsEoJq+/tJzg8ICUtS82WinJRuIw==
+"@rollup/rollup-linux-arm-gnueabihf@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm-gnueabihf/-/rollup-linux-arm-gnueabihf-4.22.4.tgz#f23555ee3d8fe941c5c5fd458cd22b65eb1c2232"
+  integrity sha512-j63YtCIRAzbO+gC2L9dWXRh5BFetsv0j0va0Wi9epXDgU/XUi5dJKo4USTttVyK7fGw2nPWK0PbAvyliz50SCQ==
 
-"@rollup/rollup-linux-arm-musleabihf@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm-musleabihf/-/rollup-linux-arm-musleabihf-4.16.4.tgz#7741df2448c11c56588b50835dbfe91b1a10b375"
-  integrity sha512-tJfJaXPiFAG+Jn3cutp7mCs1ePltuAgRqdDZrzb1aeE3TktWWJ+g7xK9SNlaSUFw6IU4QgOxAY4rA+wZUT5Wfg==
+"@rollup/rollup-linux-arm-musleabihf@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm-musleabihf/-/rollup-linux-arm-musleabihf-4.22.4.tgz#f3bbd1ae2420f5539d40ac1fde2b38da67779baa"
+  integrity sha512-dJnWUgwWBX1YBRsuKKMOlXCzh2Wu1mlHzv20TpqEsfdZLb3WoJW2kIEsGwLkroYf24IrPAvOT/ZQ2OYMV6vlrg==
 
-"@rollup/rollup-linux-arm64-gnu@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm64-gnu/-/rollup-linux-arm64-gnu-4.16.4.tgz#0a23b02d2933e4c4872ad18d879890b6a4a295df"
-  integrity sha512-7dy1BzQkgYlUTapDTvK997cgi0Orh5Iu7JlZVBy1MBURk7/HSbHkzRnXZa19ozy+wwD8/SlpJnOOckuNZtJR9w==
+"@rollup/rollup-linux-arm64-gnu@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm64-gnu/-/rollup-linux-arm64-gnu-4.22.4.tgz#7abe900120113e08a1f90afb84c7c28774054d15"
+  integrity sha512-AdPRoNi3NKVLolCN/Sp4F4N1d98c4SBnHMKoLuiG6RXgoZ4sllseuGioszumnPGmPM2O7qaAX/IJdeDU8f26Aw==
 
-"@rollup/rollup-linux-arm64-musl@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm64-musl/-/rollup-linux-arm64-musl-4.16.4.tgz#e37ef259358aa886cc07d782220a4fb83c1e6970"
-  integrity sha512-zsFwdUw5XLD1gQe0aoU2HVceI6NEW7q7m05wA46eUAyrkeNYExObfRFQcvA6zw8lfRc5BHtan3tBpo+kqEOxmg==
+"@rollup/rollup-linux-arm64-musl@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm64-musl/-/rollup-linux-arm64-musl-4.22.4.tgz#9e655285c8175cd44f57d6a1e8e5dedfbba1d820"
+  integrity sha512-Gl0AxBtDg8uoAn5CCqQDMqAx22Wx22pjDOjBdmG0VIWX3qUBHzYmOKh8KXHL4UpogfJ14G4wk16EQogF+v8hmA==
 
-"@rollup/rollup-linux-powerpc64le-gnu@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-powerpc64le-gnu/-/rollup-linux-powerpc64le-gnu-4.16.4.tgz#8c69218b6de05ee2ba211664a2d2ac1e54e43f94"
-  integrity sha512-p8C3NnxXooRdNrdv6dBmRTddEapfESEUflpICDNKXpHvTjRRq1J82CbU5G3XfebIZyI3B0s074JHMWD36qOW6w==
+"@rollup/rollup-linux-powerpc64le-gnu@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-powerpc64le-gnu/-/rollup-linux-powerpc64le-gnu-4.22.4.tgz#9a79ae6c9e9d8fe83d49e2712ecf4302db5bef5e"
+  integrity sha512-3aVCK9xfWW1oGQpTsYJJPF6bfpWfhbRnhdlyhak2ZiyFLDaayz0EP5j9V1RVLAAxlmWKTDfS9wyRyY3hvhPoOg==
 
-"@rollup/rollup-linux-riscv64-gnu@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-riscv64-gnu/-/rollup-linux-riscv64-gnu-4.16.4.tgz#d32727dab8f538d9a4a7c03bcf58c436aecd0139"
-  integrity sha512-Lh/8ckoar4s4Id2foY7jNgitTOUQczwMWNYi+Mjt0eQ9LKhr6sK477REqQkmy8YHY3Ca3A2JJVdXnfb3Rrwkng==
+"@rollup/rollup-linux-riscv64-gnu@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-riscv64-gnu/-/rollup-linux-riscv64-gnu-4.22.4.tgz#67ac70eca4ace8e2942fabca95164e8874ab8128"
+  integrity sha512-ePYIir6VYnhgv2C5Xe9u+ico4t8sZWXschR6fMgoPUK31yQu7hTEJb7bCqivHECwIClJfKgE7zYsh1qTP3WHUA==
 
-"@rollup/rollup-linux-s390x-gnu@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-s390x-gnu/-/rollup-linux-s390x-gnu-4.16.4.tgz#d46097246a187d99fc9451fe8393b7155b47c5ec"
-  integrity sha512-1xwwn9ZCQYuqGmulGsTZoKrrn0z2fAur2ujE60QgyDpHmBbXbxLaQiEvzJWDrscRq43c8DnuHx3QorhMTZgisQ==
+"@rollup/rollup-linux-s390x-gnu@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-s390x-gnu/-/rollup-linux-s390x-gnu-4.22.4.tgz#9f883a7440f51a22ed7f99e1d070bd84ea5005fc"
+  integrity sha512-GqFJ9wLlbB9daxhVlrTe61vJtEY99/xB3C8e4ULVsVfflcpmR6c8UZXjtkMA6FhNONhj2eA5Tk9uAVw5orEs4Q==
 
-"@rollup/rollup-linux-x64-gnu@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-x64-gnu/-/rollup-linux-x64-gnu-4.16.4.tgz#6356c5a03a4afb1c3057490fc51b4764e109dbc7"
-  integrity sha512-LuOGGKAJ7dfRtxVnO1i3qWc6N9sh0Em/8aZ3CezixSTM+E9Oq3OvTsvC4sm6wWjzpsIlOCnZjdluINKESflJLA==
+"@rollup/rollup-linux-x64-gnu@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-x64-gnu/-/rollup-linux-x64-gnu-4.22.4.tgz#70116ae6c577fe367f58559e2cffb5641a1dd9d0"
+  integrity sha512-87v0ol2sH9GE3cLQLNEy0K/R0pz1nvg76o8M5nhMR0+Q+BBGLnb35P0fVz4CQxHYXaAOhE8HhlkaZfsdUOlHwg==
 
-"@rollup/rollup-linux-x64-musl@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-x64-musl/-/rollup-linux-x64-musl-4.16.4.tgz#03a5831a9c0d05877b94653b5ddd3020d3c6fb06"
-  integrity sha512-ch86i7KkJKkLybDP2AtySFTRi5fM3KXp0PnHocHuJMdZwu7BuyIKi35BE9guMlmTpwwBTB3ljHj9IQXnTCD0vA==
+"@rollup/rollup-linux-x64-musl@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-x64-musl/-/rollup-linux-x64-musl-4.22.4.tgz#f473f88219feb07b0b98b53a7923be716d1d182f"
+  integrity sha512-UV6FZMUgePDZrFjrNGIWzDo/vABebuXBhJEqrHxrGiU6HikPy0Z3LfdtciIttEUQfuDdCn8fqh7wiFJjCNwO+g==
 
-"@rollup/rollup-win32-arm64-msvc@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-arm64-msvc/-/rollup-win32-arm64-msvc-4.16.4.tgz#6cc0db57750376b9303bdb6f5482af8974fcae35"
-  integrity sha512-Ma4PwyLfOWZWayfEsNQzTDBVW8PZ6TUUN1uFTBQbF2Chv/+sjenE86lpiEwj2FiviSmSZ4Ap4MaAfl1ciF4aSA==
+"@rollup/rollup-win32-arm64-msvc@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-arm64-msvc/-/rollup-win32-arm64-msvc-4.22.4.tgz#4349482d17f5d1c58604d1c8900540d676f420e0"
+  integrity sha512-BjI+NVVEGAXjGWYHz/vv0pBqfGoUH0IGZ0cICTn7kB9PyjrATSkX+8WkguNjWoj2qSr1im/+tTGRaY+4/PdcQw==
 
-"@rollup/rollup-win32-ia32-msvc@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-ia32-msvc/-/rollup-win32-ia32-msvc-4.16.4.tgz#aea0b7e492bd9ed46971cb80bc34f1eb14e07789"
-  integrity sha512-9m/ZDrQsdo/c06uOlP3W9G2ENRVzgzbSXmXHT4hwVaDQhYcRpi9bgBT0FTG9OhESxwK0WjQxYOSfv40cU+T69w==
+"@rollup/rollup-win32-ia32-msvc@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-ia32-msvc/-/rollup-win32-ia32-msvc-4.22.4.tgz#a6fc39a15db618040ec3c2a24c1e26cb5f4d7422"
+  integrity sha512-SiWG/1TuUdPvYmzmYnmd3IEifzR61Tragkbx9D3+R8mzQqDBz8v+BvZNDlkiTtI9T15KYZhP0ehn3Dld4n9J5g==
 
-"@rollup/rollup-win32-x64-msvc@4.16.4":
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-x64-msvc/-/rollup-win32-x64-msvc-4.16.4.tgz#c09ad9a132ccb5a67c4f211d909323ab1294f95f"
-  integrity sha512-YunpoOAyGLDseanENHmbFvQSfVL5BxW3k7hhy0eN4rb3gS/ct75dVD0EXOWIqFT/nE8XYW6LP6vz6ctKRi0k9A==
+"@rollup/rollup-win32-x64-msvc@4.22.4":
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-x64-msvc/-/rollup-win32-x64-msvc-4.22.4.tgz#3dd5d53e900df2a40841882c02e56f866c04d202"
+  integrity sha512-j8pPKp53/lq9lMXN57S8cFz0MynJk8OWNuUnXct/9KCpKU7DgU3bYMJhwWmcqC0UU29p8Lr0/7KEVcaM6bf47Q==
 
 "@shikijs/core@1.3.0", "@shikijs/core@^1.3.0":
   version "1.3.0"
@@ -697,28 +697,28 @@ rfdc@^1.3.1:
   integrity sha512-r5a3l5HzYlIC68TpmYKlxWjmOP6wiPJ1vWv2HeLhNsRZMrCkxeqxiHlQ21oXmQ4F3SiryXBHhAD7JZqvOJjFmg==
 
 rollup@^4.13.0:
-  version "4.16.4"
-  resolved "https://registry.yarnpkg.com/rollup/-/rollup-4.16.4.tgz#fe328eb41293f20c9593a095ec23bdc4b5d93317"
-  integrity sha512-kuaTJSUbz+Wsb2ATGvEknkI12XV40vIiHmLuFlejoo7HtDok/O5eDDD0UpCVY5bBX5U5RYo8wWP83H7ZsqVEnA==
+  version "4.22.4"
+  resolved "https://registry.yarnpkg.com/rollup/-/rollup-4.22.4.tgz#4135a6446671cd2a2453e1ad42a45d5973ec3a0f"
+  integrity sha512-vD8HJ5raRcWOyymsR6Z3o6+RzfEPCnVLMFJ6vRslO1jt4LO6dUo5Qnpg7y4RkZFM2DMe3WUirkI5c16onjrc6A==
   dependencies:
     "@types/estree" "1.0.5"
   optionalDependencies:
-    "@rollup/rollup-android-arm-eabi" "4.16.4"
-    "@rollup/rollup-android-arm64" "4.16.4"
-    "@rollup/rollup-darwin-arm64" "4.16.4"
-    "@rollup/rollup-darwin-x64" "4.16.4"
-    "@rollup/rollup-linux-arm-gnueabihf" "4.16.4"
-    "@rollup/rollup-linux-arm-musleabihf" "4.16.4"
-    "@rollup/rollup-linux-arm64-gnu" "4.16.4"
-    "@rollup/rollup-linux-arm64-musl" "4.16.4"
-    "@rollup/rollup-linux-powerpc64le-gnu" "4.16.4"
-    "@rollup/rollup-linux-riscv64-gnu" "4.16.4"
-    "@rollup/rollup-linux-s390x-gnu" "4.16.4"
-    "@rollup/rollup-linux-x64-gnu" "4.16.4"
-    "@rollup/rollup-linux-x64-musl" "4.16.4"
-    "@rollup/rollup-win32-arm64-msvc" "4.16.4"
-    "@rollup/rollup-win32-ia32-msvc" "4.16.4"
-    "@rollup/rollup-win32-x64-msvc" "4.16.4"
+    "@rollup/rollup-android-arm-eabi" "4.22.4"
+    "@rollup/rollup-android-arm64" "4.22.4"
+    "@rollup/rollup-darwin-arm64" "4.22.4"
+    "@rollup/rollup-darwin-x64" "4.22.4"
+    "@rollup/rollup-linux-arm-gnueabihf" "4.22.4"
+    "@rollup/rollup-linux-arm-musleabihf" "4.22.4"
+    "@rollup/rollup-linux-arm64-gnu" "4.22.4"
+    "@rollup/rollup-linux-arm64-musl" "4.22.4"
+    "@rollup/rollup-linux-powerpc64le-gnu" "4.22.4"
+    "@rollup/rollup-linux-riscv64-gnu" "4.22.4"
+    "@rollup/rollup-linux-s390x-gnu" "4.22.4"
+    "@rollup/rollup-linux-x64-gnu" "4.22.4"
+    "@rollup/rollup-linux-x64-musl" "4.22.4"
+    "@rollup/rollup-win32-arm64-msvc" "4.22.4"
+    "@rollup/rollup-win32-ia32-msvc" "4.22.4"
+    "@rollup/rollup-win32-x64-msvc" "4.22.4"
     fsevents "~2.3.2"
 
 shiki@1.3.0, shiki@^1.3.0:
@@ -743,10 +743,10 @@ tabbable@^6.2.0:
   resolved "https://registry.yarnpkg.com/tabbable/-/tabbable-6.2.0.tgz#732fb62bc0175cfcec257330be187dcfba1f3b97"
   integrity sha512-Cat63mxsVJlzYvN51JmVXIgNoUokrIaT2zLclCXjRd8boZ0004U4KCs/sToJ75C6sdlByWxpYnb5Boif1VSFew==
 
-vite@^5.2.10, vite@^5.2.9:
-  version "5.2.10"
-  resolved "https://registry.yarnpkg.com/vite/-/vite-5.2.10.tgz#2ac927c91e99d51b376a5c73c0e4b059705f5bd7"
-  integrity sha512-PAzgUZbP7msvQvqdSD+ErD5qGnSFiGOoWmV5yAKUEI0kdhjbH6nMWVyZQC/hSc4aXwc0oJ9aEdIiF9Oje0JFCw==
+vite@^5.2.14, vite@^5.2.9:
+  version "5.2.14"
+  resolved "https://registry.yarnpkg.com/vite/-/vite-5.2.14.tgz#fd5f60facf6b5f90ec7da6323c467a365d380c3d"
+  integrity sha512-TFQLuwWLPms+NBNlh0D9LZQ+HXW471COABxw/9TEUBrjuHMo9BrYBPrN/SYAwIuVL+rLerycxiLT41t4f5MZpA==
   dependencies:
     esbuild "^0.20.1"
     postcss "^8.4.38"

builddefs/generic_features.mk

@@ -36,6 +36,7 @@ GENERIC_FEATURES = \
     HAPTIC \
     KEY_LOCK \
     KEY_OVERRIDE \
+    LAYER_LOCK \
     LEADER \
     MAGIC \
     MOUSEKEY \

builddefs/show_options.mk

@@ -67,7 +67,6 @@ OTHER_OPTION_NAMES = \
   PS2_DRIVER \
   RAW_ENABLE \
   SWAP_HANDS_ENABLE \
-  RING_BUFFERED_6KRO_REPORT_ENABLE \
   WATCHDOG_ENABLE \
   ERGOINU \
   NO_USB_STARTUP_CHECK \

data/constants/keycodes/extras/keycodes_farsi_0.0.1.hjson

@@ -0,0 +1,616 @@
+{
+    "aliases": {
+/*
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │   │ ۱ │ ۲ │ ۳ │ ۴ │ ۵ │ ۶ │ ۷ │ ۸ │ ۹ │ ۰ │ - │ = │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │ ض │ ص │ ث │ ق │ ف │ غ │ ع │ ه │ خ │ ح │ ج │ چ │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │ ش │ س │ ی │ ب │ ل │ ا │ ت │ ن │ م │ ک │ گ │ \ │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ < │ ظ │ ط │ ز │ ر │ ذ │ د │ پ │ و │ . │ / │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+        "KC_GRV": {
+            "key": "FA_ZWJ",
+            "label": "(zero-width joiner)",
+        }
+        "KC_1": {
+            "key": "FA_1A",
+            "label": "۱",
+        }
+        "KC_2": {
+            "key": "FA_2A",
+            "label": "۲",
+        }
+        "KC_3": {
+            "key": "FA_3A",
+            "label": "۳",
+        }
+        "KC_4": {
+            "key": "FA_4A",
+            "label": "۴",
+        }
+        "KC_5": {
+            "key": "FA_5A",
+            "label": "۵",
+        }
+        "KC_6": {
+            "key": "FA_6A",
+            "label": "۶",
+        }
+        "KC_7": {
+            "key": "FA_7A",
+            "label": "۷",
+        }
+        "KC_8": {
+            "key": "FA_8A",
+            "label": "۸",
+        }
+        "KC_9": {
+            "key": "FA_9A",
+            "label": "۹",
+        }
+        "KC_0": {
+            "key": "FA_0A",
+            "label": "۰",
+        }
+        "KC_MINS": {
+            "key": "FA_MINS",
+            "label": "-",
+        }
+        "KC_EQL": {
+            "key": "FA_EQL",
+            "label": "=",
+        }
+        "KC_Q": {
+            "key": "FA_ZAD",
+            "label": "ض",
+        }
+        "KC_W": {
+            "key": "FA_SAD",
+            "label": "ص",
+        }
+        "KC_E": {
+            "key": "FA_SE",
+            "label": "ث",
+        }
+        "KC_R": {
+            "key": "FA_QAF",
+            "label": "ق",
+        }
+        "KC_T": {
+            "key": "FA_FE",
+            "label": "ف",
+        }
+        "KC_Y": {
+            "key": "FA_GHYN",
+            "label": "غ",
+        }
+        "KC_U": {
+            "key": "FA_EYN",
+            "label": "ع",
+        }
+        "KC_I": {
+            "key": "FA_HE",
+            "label": "ه",
+        }
+        "KC_O": {
+            "key": "FA_KHE",
+            "label": "خ",
+        }
+        "KC_P": {
+            "key": "FA_HEJ",
+            "label": "ح",
+        }
+        "KC_LBRC": {
+            "key": "FA_JIM",
+            "label": "ج",
+        }
+        "KC_RBRC": {
+            "key": "FA_CHE",
+            "label": "چ",
+        }
+        "KC_A": {
+            "key": "FA_SHIN",
+            "label": "ش",
+        }
+        "KC_S": {
+            "key": "FA_SIN",
+            "label": "س",
+        }
+        "KC_D": {
+            "key": "FA_YE",
+            "label": "ی",
+        }
+        "KC_F": {
+            "key": "FA_BE",
+            "label": "ب",
+        }
+        "KC_G": {
+            "key": "FA_LAM",
+            "label": "ل",
+        }
+        "KC_H": {
+            "key": "FA_ALEF",
+            "label": "ا",
+        }
+        "KC_J": {
+            "key": "FA_TE",
+            "label": "ت",
+        }
+        "KC_K": {
+            "key": "FA_NOON",
+            "label": "ن",
+        }
+        "KC_L": {
+            "key": "FA_MIM",
+            "label": "م",
+        }
+        "KC_SCLN": {
+            "key": "FA_KAF",
+            "label": "ک",
+        }
+        "KC_QUOT": {
+            "key": "FA_GAF",
+            "label": "گ",
+        }
+        "KC_BSLS": {
+            "key": "FA_BSLS",
+            "label": "\\",
+        }
+        "KC_LT": {
+            "key": "FA_LT",
+            "label": "<",
+        }
+        "KC_Z": {
+            "key": "FA_ZA",
+            "label": "ظ",
+        }
+        "KC_X": {
+            "key": "FA_TA",
+            "label": "ط",
+        }
+        "KC_C": {
+            "key": "FA_ZE",
+            "label": "ز",
+        }
+        "KC_V": {
+            "key": "FA_RE",
+            "label": "ر",
+        }
+        "KC_B": {
+            "key": "FA_ZAL",
+            "label": "ذ",
+        }
+        "KC_N": {
+            "key": "FA_DAL",
+            "label": "د",
+        }
+        "KC_M": {
+            "key": "FA_PE",
+            "label": "پ",
+        }
+        "KC_COMM": {
+            "key": "FA_WAW",
+            "label": "و",
+        }
+        "KC_DOT": {
+            "key": "FA_DOT",
+            "label": ".",
+        }
+        "KC_SLSH": {
+            "key": "FA_SLSH",
+            "label": "/",
+        }
+        "KC_SPC": {
+            "key": "FA_SPC",
+            "label": " ",
+        }
+/* Shifted symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │ ÷ │ ! │ ٬ │ ٫ │ ﷼ │ ٪ │ × │ ، │ * │ ) │ ( │ ـ │ + │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │  ْ │  ٌ │  ٍ │  ً │  ُ │  ِ │  َ │  ّ │ ] │ [ │ } │ { │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │ ؤ │ ئ │ ي │ إ │ أ │ آ │ ة │ » │ « │ : │ ؛ │ | │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ > │ ك │  ٓ │ ژ │ ٰ  │   │  ٔ │ ء │   │   │ ؟ │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+        "S(FA_ZWJ)": {
+            "key": "FA_DIV",
+            "label": "÷",
+        }
+        "S(FA_1A)": {
+            "key": "FA_EXLM",
+            "label": "!",
+        }
+        "S(FA_2A)": {
+            "key": "FA_THS",
+            "label": "٬",
+        }
+        "S(FA_3A)": {
+            "key": "FA_DECS",
+            "label": "٫",
+        }
+        "S(FA_4A)": {
+            "key": "FA_RIAL",
+            "label": "﷼",
+        }
+        "S(FA_5A)": {
+            "key": "FA_PRCA",
+            "label": "٪",
+        }
+        "S(FA_6A)": {
+            "key": "FA_MUL",
+            "label": "×",
+        }
+        "S(FA_7A)": {
+            "key": "FA_COMA",
+            "label": "،",
+        }
+        "S(FA_8A)": {
+            "key": "FA_ASTR",
+            "label": "*",
+        }
+        "S(FA_9A)": {
+            "key": "FA_RPRN",
+            "label": ")",
+        }
+        "S(FA_0A)": {
+            "key": "FA_LPRN",
+            "label": "(",
+        }
+        "S(FA_MINS)": {
+            "key": "FA_TATW",
+            "label": "ـ",
+        }
+        "S(FA_EQL)": {
+            "key": "FA_PLUS",
+            "label": "+",
+        }
+        "S(FA_ZAD)": {
+            "key": "FA_SUK",
+            "label": "ْ",
+        }
+        "S(FA_SAD)": {
+            "key": "FA_DMTN",
+            "label": "ٌ",
+        }
+        "S(FA_SE)": {
+            "key": "FA_KSTN",
+            "label": "ٍ",
+        }
+        "S(FA_QAF)": {
+            "key": "FA_FTHN",
+            "label": "ً",
+        }
+        "S(FA_FE)": {
+            "key": "FA_DMM",
+            "label": "ُ",
+        }
+        "S(FA_GHYN)": {
+            "key": "FA_KAS",
+            "label": "ِ",
+        }
+        "S(FA_EYN)": {
+            "key": "FA_FAT",
+            "label": "َ",
+        }
+        "S(FA_HE)": {
+            "key": "FA_TSDD",
+            "label": "",
+        }
+        "S(FA_KHE)": {
+            "key": "FA_RBRC",
+            "label": "]",
+        }
+        "S(FA_HEJ)": {
+            "key": "FA_LBRC",
+            "label": "[",
+        }
+        "S(FA_JIM)": {
+            "key": "FA_RCBR",
+            "label": "}",
+        }
+        "S(FA_CHE)": {
+            "key": "FA_LCBR",
+            "label": "{",
+        }
+        "S(FA_SHIN)": {
+            "key": "FA_HMZV",
+            "label": "ؤ",
+        }
+        "S(FA_SIN)": {
+            "key": "FA_HMZY",
+            "label": "ئ",
+        }
+        "S(FA_YE)": {
+            "key": "FA_YEA",
+            "label": "ي",
+        }
+        "S(FA_BE)": {
+            "key": "FA_HMZU",
+            "label": "إ",
+        }
+        "S(FA_LAM)": {
+            "key": "FA_HMZO",
+            "label": "أ",
+        }
+        "S(FA_ALEF)": {
+            "key": "FA_MALF",
+            "label": "آ",
+        }
+        "S(FA_TE)": {
+            "key": "FA_TEHM",
+            "label": "ة",
+        }
+        "S(FA_NOON)": {
+            "key": "FA_RQOT",
+            "label": "»",
+        }
+        "S(FA_MIM)": {
+            "key": "FA_LQOT",
+            "label": "«",
+        }
+        "S(FA_KAF)": {
+            "key": "FA_COLN",
+            "label": ":",
+        }
+        "S(FA_GAF)": {
+            "key": "FA_SCLA",
+            "label": "؛",
+        }
+        "S(FA_LT)": {
+            "key": "FA_GT",
+            "label": ">",
+        }
+        "S(FA_ZA)": {
+            "key": "FA_KAFA",
+            "label": "ك",
+        }
+        "S(FA_TA)": {
+            "key": "FA_MADO",
+            "label": "ٓ",
+        }
+        "S(FA_ZE)": {
+            "key": "FA_JEH",
+            "label": "ژ",
+        }
+        "S(FA_RE)": {
+            "key": "FA_SUPA",
+            "label": "ٰ",
+        }
+        "S(FA_ZAL)": {
+            "key": "FA_ZWNJ",
+            "label": "(zero-width non-joiner)",
+        }
+        "S(FA_DAL)": {
+            "key": "FA_HMZA",
+            "label": "ٔ",
+        }
+        "S(FA_PE)": {
+            "key": "FA_HMZ",
+            "label": "ء",
+        }
+        "S(FA_SLSH)": {
+            "key": "FA_QSA",
+            "label": "؟",
+        }
+/* AltGr symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │ ~ │ ` │ @ │ # │ $ │ % │ ^ │ & │ • │   │   │ _ │ − │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │ ° │   │ € │   │   │   │   │   │   │   │   │   │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │   │   │ ى │   │   │ ٱ │   │ ﴾ │ ﴿ │ ; │ " │ ‐ │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ | │   │   │   │  ٖ │   │  ٕ │ … │ , │ ' │ ? │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+        "ALGR(FA_ZWJ)": {
+            "key": "FA_TILD",
+            "label": "~",
+        }
+        "ALGR(FA_1A)": {
+            "key": "FA_GRV",
+            "label": "`",
+        }
+        "ALGR(FA_2A)": {
+            "key": "FA_AT",
+            "label": "@",
+        }
+        "ALGR(FA_3A)": {
+            "key": "FA_HASH",
+            "label": "#",
+        }
+        "ALGR(FA_4A)": {
+            "key": "FA_DLR",
+            "label": "$",
+        }
+        "ALGR(FA_5A)": {
+            "key": "FA_PERC",
+            "label": "%",
+        }
+        "ALGR(FA_6A)": {
+            "key": "FA_CIRC",
+            "label": "^",
+        }
+        "ALGR(FA_7A)": {
+            "key": "FA_AMPR",
+            "label": "&",
+        }
+        "ALGR(FA_8A)": {
+            "key": "FA_BULT",
+            "label": "•",
+        }
+        "ALGR(FA_9A)": {
+            "key": "FA_LRM",
+            "label": "(left-to-right mark)",
+        }
+        "ALGR(FA_0A)": {
+            "key": "FA_RLM",
+            "label": "(right-to-left mark)",
+        }
+        "ALGR(FA_MINS)": {
+            "key": "FA_UNDS",
+            "label": "_",
+        }
+        "ALGR(FA_EQL)": {
+            "key": "FA_DMNS",
+            "label": "− (dead)",
+        }
+        "ALGR(FA_ZAD)": {
+            "key": "FA_DEG",
+            "label": "°",
+        }
+        "ALGR(FA_SE)": {
+            "key": "FA_EURO",
+            "label": "€",
+        }
+        "ALGR(FA_HE)": {
+            "key": "FA_LRO",
+            "label": "(left-to-right override)",
+        }
+        "ALGR(FA_KHE)": {
+            "key": "FA_RLO",
+            "label": "(right-to-left override)",
+        }
+        "ALGR(FA_HEJ)": {
+            "key": "FA_PDF",
+            "label": "(pop directional formatting)",
+        }
+        "ALGR(FA_JIM)": {
+            "key": "FA_LRE",
+            "label": "(left-to-right embedding)",
+        }
+        "ALGR(FA_CHE)": {
+            "key": "FA_RLE",
+            "label": "(right-to-left embedding)",
+        }
+        "ALGR(FA_YE)": {
+            "key": "FA_ALFM",
+            "label": "ى",
+        }
+        "ALGR(FA_ALEF)": {
+            "key": "FA_ALFW",
+            "label": "ٱ",
+        }
+        "ALGR(FA_NOON)": {
+            "key": "FA_LORP",
+            "label": "﴾",
+        }
+        "ALGR(FA_MIM)": {
+            "key": "FA_RORP",
+            "label": "﴿",
+        }
+        "ALGR(FA_KAF)": {
+            "key": "FA_SCLN",
+            "label": ";",
+        }
+        "ALGR(FA_GAF)": {
+            "key": "FA_DQT",
+            "label": "\"",
+        }
+        "ALGR(FA_BSLS)": {
+            "key": "FA_MINA",
+            "label": "-",
+        }
+        "ALGR(FA_ZA)": {
+            "key": "FA_PIPE",
+            "label": "|",
+        }
+        "ALGR(FA_RA)": {
+            "key": "FA_SUBA",
+            "label": "ٖ",
+        }
+        "ALGR(FA_DAL)": {
+            "key": "FA_HMZB",
+            "label": "ء",
+        }
+        "ALGR(FA_PE)": {
+            "key": "FA_ELLP",
+            "label": "…",
+        }
+        "ALGR(FA_WAW)": {
+            "key": "FA_COMM",
+            "label": ",",
+        }
+        "ALGR(FA_DOT)": {
+            "key": "FA_QUOT",
+            "label": "'",
+        }
+        "ALGR(FA_SLSH)": {
+            "key": "FA_QUES",
+            "label": "?",
+        }
+/* Shift+AltGr symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │   │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │   │   │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │   │   │   │   │   │   │   │   │   │   │   │   │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │   │   │   │   │   │   │   │   │   │   │   │   │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ ¦ │   │   │   │   │   │   │   │   │   │   │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+        "S(ALGR(FA_1A))": {
+            "key": "FA_1",
+            "label": "1",
+        }
+        "S(ALGR(FA_2A))": {
+            "key": "FA_2",
+            "label": "2",
+        }
+        "S(ALGR(FA_3A))": {
+            "key": "FA_3",
+            "label": "3",
+        }
+        "S(ALGR(FA_4A))": {
+            "key": "FA_4",
+            "label": "4",
+        }
+        "S(ALGR(FA_5A))": {
+            "key": "FA_5",
+            "label": "5",
+        }
+        "S(ALGR(FA_6A))": {
+            "key": "FA_6",
+            "label": "6",
+        }
+        "S(ALGR(FA_7A))": {
+            "key": "FA_7",
+            "label": "7",
+        }
+        "S(ALGR(FA_8A))": {
+            "key": "FA_8",
+            "label": "8",
+        }
+        "S(ALGR(FA_9A))": {
+            "key": "FA_9",
+            "label": "9",
+        }
+        "S(ALGR(FA_0A))": {
+            "key": "FA_0",
+            "label": "0",
+        }
+        "S(ALGR(FA_LT))": {
+            "key": "FA_BRKP",
+            "label": "¦",
+        }
+        "S(ALGR(FA_SPC))": {
+            "key": "FA_NNBS",
+            "label": "(narrow non-breaking space)",
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.1_basic.hjson

@@ -1140,7 +1140,7 @@
         "0x00AE": {
             "group": "media",
             "key": "KC_MEDIA_PLAY_PAUSE",
-            "label": "Mute",
+            "label": "Play/Pause Track",
             "aliases": [
                 "KC_MPLY"
             ]

data/constants/keycodes/keycodes_0.0.1_midi.hjson

@@ -84,7 +84,7 @@
             "group": "midi",
             "key": "QK_MIDI_NOTE_G_SHARP_0",
             "aliases": [
-                "MI_Gs"
+                "MI_Gs",
                 "MI_Ab"
             ]
         },
@@ -99,7 +99,7 @@
             "group": "midi",
             "key": "QK_MIDI_NOTE_A_SHARP_0",
             "aliases": [
-                "MI_As"
+                "MI_As",
                 "MI_Bb"
             ]
         },

data/constants/keycodes/keycodes_0.0.2_kb.hjson

@@ -2,131 +2,131 @@
     "keycodes": {
         "0x7E00": {
             "group": "kb",
-            "key": "QK_KB_0",
+            "key": "QK_KB_0"
         },
         "0x7E01": {
             "group": "kb",
-            "key": "QK_KB_1",
+            "key": "QK_KB_1"
         },
         "0x7E02": {
             "group": "kb",
-            "key": "QK_KB_2",
+            "key": "QK_KB_2"
         },
         "0x7E03": {
             "group": "kb",
-            "key": "QK_KB_3",
+            "key": "QK_KB_3"
         },
         "0x7E04": {
             "group": "kb",
-            "key": "QK_KB_4",
+            "key": "QK_KB_4"
         },
         "0x7E05": {
             "group": "kb",
-            "key": "QK_KB_5",
+            "key": "QK_KB_5"
         },
         "0x7E06": {
             "group": "kb",
-            "key": "QK_KB_6",
+            "key": "QK_KB_6"
         },
         "0x7E07": {
             "group": "kb",
-            "key": "QK_KB_7",
+            "key": "QK_KB_7"
         },
         "0x7E08": {
             "group": "kb",
-            "key": "QK_KB_8",
+            "key": "QK_KB_8"
         },
         "0x7E09": {
             "group": "kb",
-            "key": "QK_KB_9",
+            "key": "QK_KB_9"
         },
         "0x7E0A": {
             "group": "kb",
-            "key": "QK_KB_10",
+            "key": "QK_KB_10"
         },
         "0x7E0B": {
             "group": "kb",
-            "key": "QK_KB_11",
+            "key": "QK_KB_11"
         },
         "0x7E0C": {
             "group": "kb",
-            "key": "QK_KB_12",
+            "key": "QK_KB_12"
         },
         "0x7E0D": {
             "group": "kb",
-            "key": "QK_KB_13",
+            "key": "QK_KB_13"
         },
         "0x7E0E": {
             "group": "kb",
-            "key": "QK_KB_14",
+            "key": "QK_KB_14"
         },
         "0x7E0F": {
             "group": "kb",
-            "key": "QK_KB_15",
+            "key": "QK_KB_15"
         },
         "0x7E10": {
             "group": "kb",
-            "key": "QK_KB_16",
+            "key": "QK_KB_16"
         },
         "0x7E11": {
             "group": "kb",
-            "key": "QK_KB_17",
+            "key": "QK_KB_17"
         },
          "0x7E12": {
             "group": "kb",
-            "key": "QK_KB_18",
+            "key": "QK_KB_18"
         },
         "0x7E13": {
             "group": "kb",
-            "key": "QK_KB_19",
+            "key": "QK_KB_19"
         },
         "0x7E14": {
             "group": "kb",
-            "key": "QK_KB_20",
+            "key": "QK_KB_20"
         },
         "0x7E15": {
             "group": "kb",
-            "key": "QK_KB_21",
+            "key": "QK_KB_21"
         },
         "0x7E16": {
             "group": "kb",
-            "key": "QK_KB_22",
+            "key": "QK_KB_22"
         },
         "0x7E17": {
             "group": "kb",
-            "key": "QK_KB_23",
+            "key": "QK_KB_23"
         },
         "0x7E18": {
             "group": "kb",
-            "key": "QK_KB_24",
+            "key": "QK_KB_24"
         },
         "0x7E19": {
             "group": "kb",
-            "key": "QK_KB_25",
+            "key": "QK_KB_25"
         },
         "0x7E1A": {
             "group": "kb",
-            "key": "QK_KB_26",
-        },       
+            "key": "QK_KB_26"
+        },
         "0x7E1B": {
             "group": "kb",
-            "key": "QK_KB_27",
+            "key": "QK_KB_27"
         },
         "0x7E1C": {
             "group": "kb",
-            "key": "QK_KB_28",
+            "key": "QK_KB_28"
         },
         "0x7E1D": {
             "group": "kb",
-            "key": "QK_KB_29",
+            "key": "QK_KB_29"
         },
         "0x7E1E": {
             "group": "kb",
-            "key": "QK_KB_30",
+            "key": "QK_KB_30"
         },
         "0x7E1F": {
             "group": "kb",
-            "key": "QK_KB_31",
-        },
+            "key": "QK_KB_31"
+        }
     }
 }

data/constants/keycodes/keycodes_0.0.2_midi.hjson

@@ -86,7 +86,7 @@
             "group": "midi",
             "key": "QK_MIDI_NOTE_G_SHARP_0",
             "aliases": [
-                "MI_Gs"
+                "MI_Gs",
                 "MI_Ab"
             ]
         },
@@ -101,7 +101,7 @@
             "group": "midi",
             "key": "QK_MIDI_NOTE_A_SHARP_0",
             "aliases": [
-                "MI_As"
+                "MI_As",
                 "MI_Bb"
             ]
         },

data/constants/keycodes/keycodes_0.0.2_user.hjson

@@ -2,131 +2,131 @@
     "keycodes": {
         "0x7E40": {
             "group": "user",
-            "key": "QK_USER_0",
+            "key": "QK_USER_0"
         },
         "0x7E41": {
             "group": "user",
-            "key": "QK_USER_1",
+            "key": "QK_USER_1"
         },
         "0x7E42": {
             "group": "user",
-            "key": "QK_USER_2",
+            "key": "QK_USER_2"
         },
         "0x7E43": {
             "group": "user",
-            "key": "QK_USER_3",
+            "key": "QK_USER_3"
         },
         "0x7E44": {
             "group": "user",
-            "key": "QK_USER_4",
+            "key": "QK_USER_4"
         },
         "0x7E45": {
             "group": "user",
-            "key": "QK_USER_5",
+            "key": "QK_USER_5"
         },
         "0x7E46": {
             "group": "user",
-            "key": "QK_USER_6",
+            "key": "QK_USER_6"
         },
         "0x7E47": {
             "group": "user",
-            "key": "QK_USER_7",
+            "key": "QK_USER_7"
         },
         "0x7E48": {
             "group": "user",
-            "key": "QK_USER_8",
+            "key": "QK_USER_8"
         },
         "0x7E49": {
             "group": "user",
-            "key": "QK_USER_9",
+            "key": "QK_USER_9"
         },
         "0x7E4A": {
             "group": "user",
-            "key": "QK_USER_10",
+            "key": "QK_USER_10"
         },
         "0x7E4B": {
             "group": "user",
-            "key": "QK_USER_11",
+            "key": "QK_USER_11"
         },
         "0x7E4C": {
             "group": "user",
-            "key": "QK_USER_12",
+            "key": "QK_USER_12"
         },
         "0x7E4D": {
             "group": "user",
-            "key": "QK_USER_13",
+            "key": "QK_USER_13"
         },
         "0x7E4E": {
             "group": "user",
-            "key": "QK_USER_14",
+            "key": "QK_USER_14"
         },
         "0x7E4F": {
             "group": "user",
-            "key": "QK_USER_15",
+            "key": "QK_USER_15"
         },
         "0x7E50": {
             "group": "user",
-            "key": "QK_USER_16",
+            "key": "QK_USER_16"
         },
         "0x7E51": {
             "group": "user",
-            "key": "QK_USER_17",
+            "key": "QK_USER_17"
         },
          "0x7E52": {
             "group": "user",
-            "key": "QK_USER_18",
+            "key": "QK_USER_18"
         },
         "0x7E53": {
             "group": "user",
-            "key": "QK_USER_19",
+            "key": "QK_USER_19"
         },
         "0x7E54": {
             "group": "user",
-            "key": "QK_USER_20",
+            "key": "QK_USER_20"
         },
         "0x7E55": {
             "group": "user",
-            "key": "QK_USER_21",
+            "key": "QK_USER_21"
         },
         "0x7E56": {
             "group": "user",
-            "key": "QK_USER_22",
+            "key": "QK_USER_22"
         },
         "0x7E57": {
             "group": "user",
-            "key": "QK_USER_23",
+            "key": "QK_USER_23"
         },
         "0x7E58": {
             "group": "user",
-            "key": "QK_USER_24",
+            "key": "QK_USER_24"
         },
         "0x7E59": {
             "group": "user",
-            "key": "QK_USER_25",
+            "key": "QK_USER_25"
         },
         "0x7E5A": {
             "group": "user",
-            "key": "QK_USER_26",
-        },       
+            "key": "QK_USER_26"
+        },
         "0x7E5B": {
             "group": "user",
-            "key": "QK_USER_27",
+            "key": "QK_USER_27"
         },
         "0x7E5C": {
             "group": "user",
-            "key": "QK_USER_28",
+            "key": "QK_USER_28"
         },
         "0x7E5D": {
             "group": "user",
-            "key": "QK_USER_29",
+            "key": "QK_USER_29"
         },
         "0x7E5E": {
             "group": "user",
-            "key": "QK_USER_30",
+            "key": "QK_USER_30"
         },
         "0x7E5F": {
             "group": "user",
-            "key": "QK_USER_31",
-        },
+            "key": "QK_USER_31"
+        }
     }
 }

data/constants/keycodes/keycodes_0.0.5_basic.hjson

@@ -0,0 +1,175 @@
+{
+    "keycodes": {
+        "0x00CD": {
+            "group": "mouse",
+            "key": "QK_MOUSE_CURSOR_UP",
+            "label": "Mouse cursor up",
+            "aliases": [
+                "!reset!",
+                "MS_UP"
+            ]
+        },
+        "0x00CE": {
+            "group": "mouse",
+            "key": "QK_MOUSE_CURSOR_DOWN",
+            "label": "Mouse cursor down",
+            "aliases": [
+                "!reset!",
+                "MS_DOWN"
+            ]
+        },
+        "0x00CF": {
+            "group": "mouse",
+            "key": "QK_MOUSE_CURSOR_LEFT",
+            "label": "Mouse cursor left",
+            "aliases": [
+                "!reset!",
+                "MS_LEFT"
+            ]
+        },
+        "0x00D0": {
+            "group": "mouse",
+            "key": "QK_MOUSE_CURSOR_RIGHT",
+            "label": "Mouse cursor right",
+            "aliases": [
+                "!reset!",
+                "MS_RGHT"
+            ]
+        },
+        "0x00D1": {
+            "group": "mouse",
+            "key": "QK_MOUSE_BUTTON_1",
+            "label": "Mouse button 1",
+            "aliases": [
+                "!reset!",
+                "MS_BTN1"
+            ]
+        },
+        "0x00D2": {
+            "group": "mouse",
+            "key": "QK_MOUSE_BUTTON_2",
+            "label": "Mouse button 2",
+            "aliases": [
+                "!reset!",
+                "MS_BTN2"
+            ]
+        },
+        "0x00D3": {
+            "group": "mouse",
+            "key": "QK_MOUSE_BUTTON_3",
+            "label": "Mouse button 3",
+            "aliases": [
+                "!reset!",
+                "MS_BTN3"
+            ]
+        },
+        "0x00D4": {
+            "group": "mouse",
+            "key": "QK_MOUSE_BUTTON_4",
+            "label": "Mouse button 4",
+            "aliases": [
+                "!reset!",
+                "MS_BTN4"
+            ]
+        },
+        "0x00D5": {
+            "group": "mouse",
+            "key": "QK_MOUSE_BUTTON_5",
+            "label": "Mouse button 5",
+            "aliases": [
+                "!reset!",
+                "MS_BTN5"
+            ]
+        },
+        "0x00D6": {
+            "group": "mouse",
+            "key": "QK_MOUSE_BUTTON_6",
+            "label": "Mouse button 6",
+            "aliases": [
+                "!reset!",
+                "MS_BTN6"
+            ]
+        },
+        "0x00D7": {
+            "group": "mouse",
+            "key": "QK_MOUSE_BUTTON_7",
+            "label": "Mouse button 7",
+            "aliases": [
+                "!reset!",
+                "MS_BTN7"
+            ]
+        },
+        "0x00D8": {
+            "group": "mouse",
+            "key": "QK_MOUSE_BUTTON_8",
+            "label": "Mouse button 8",
+            "aliases": [
+                "!reset!",
+                "MS_BTN8"
+            ]
+        },
+        "0x00D9": {
+            "group": "mouse",
+            "key": "QK_MOUSE_WHEEL_UP",
+            "label": "Mouse wheel up",
+            "aliases": [
+                "!reset!",
+                "MS_WHLU"
+            ]
+        },
+        "0x00DA": {
+            "group": "mouse",
+            "key": "QK_MOUSE_WHEEL_DOWN",
+            "label": "Mouse wheel down",
+            "aliases": [
+                "!reset!",
+                "MS_WHLD"
+            ]
+        },
+        "0x00DB": {
+            "group": "mouse",
+            "key": "QK_MOUSE_WHEEL_LEFT",
+            "label": "Mouse wheel left",
+            "aliases": [
+                "!reset!",
+                "MS_WHLL"
+            ]
+        },
+        "0x00DC": {
+            "group": "mouse",
+            "key": "QK_MOUSE_WHEEL_RIGHT",
+            "label": "Mouse wheel right",
+            "aliases": [
+                "!reset!",
+                "MS_WHLR"
+            ]
+        },
+        "0x00DD": {
+            "group": "mouse",
+            "key": "QK_MOUSE_ACCELERATION_0",
+            "label": "Set mouse acceleration to 0",
+            "aliases": [
+                "!reset!",
+                "MS_ACL0"
+            ]
+        },
+        "0x00DE": {
+            "group": "mouse",
+            "key": "QK_MOUSE_ACCELERATION_1",
+            "label": "Set mouse acceleration to 1",
+            "aliases": [
+                "!reset!",
+                "MS_ACL1"
+            ]
+        },
+        "0x00DF": {
+            "group": "mouse",
+            "key": "QK_MOUSE_ACCELERATION_2",
+            "label": "Set mouse acceleration to 2",
+            "aliases": [
+                "!reset!",
+                "MS_ACL2"
+            ]
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.6.hjson

@@ -0,0 +1,7 @@
+{
+    "ranges": {
+        "0x52E0/0x001F": {
+            "define": "QK_PERSISTENT_DEF_LAYER"
+        }
+    }
+}

data/constants/keycodes/keycodes_0.0.6_connection.hjson

@@ -0,0 +1,115 @@
+{
+    "ranges": {
+        "0x7780/0x003F": {
+            "define": "QK_CONNECTION"
+        }
+    }
+    "keycodes": {
+        "0x7780": {
+            "group": "connection",
+            "key": "QK_OUTPUT_AUTO",
+            "aliases": [
+                "OU_AUTO"
+            ]
+        },
+        "0x7781": {
+            "group": "connection",
+            "key": "QK_OUTPUT_NEXT",
+            "aliases": [
+                "OU_NEXT"
+            ]
+        },
+        "0x7782": {
+            "group": "connection",
+            "key": "QK_OUTPUT_PREV",
+            "aliases": [
+                "OU_PREV"
+            ]
+        },
+        "0x7783": {
+            "group": "connection",
+            "key": "QK_OUTPUT_NONE",
+            "aliases": [
+                "OU_NONE"
+            ]
+        },
+        "0x7784": {
+            "group": "connection",
+            "key": "QK_OUTPUT_USB",
+            "aliases": [
+                "OU_USB"
+            ]
+        },
+        "0x7785": {
+            "group": "connection",
+            "key": "QK_OUTPUT_2P4GHZ",
+            "aliases": [
+                "OU_2P4G"
+            ]
+        },
+        "0x7786": {
+            "group": "connection",
+            "key": "QK_OUTPUT_BLUETOOTH",
+            "aliases": [
+                "OU_BT"
+            ]
+        },
+
+        "0x7790": {
+            "group": "connection",
+            "key": "QK_BLUETOOTH_PROFILE_NEXT",
+            "aliases": [
+                "BT_NEXT"
+            ]
+        },
+        "0x7791": {
+            "group": "connection",
+            "key": "QK_BLUETOOTH_PROFILE_PREV",
+            "aliases": [
+                "BT_PREV"
+            ]
+        },
+        "0x7792": {
+            "group": "connection",
+            "key": "QK_BLUETOOTH_UNPAIR",
+            "aliases": [
+                "BT_UNPR"
+            ]
+        }
+        "0x7793": {
+            "group": "connection",
+            "key": "QK_BLUETOOTH_PROFILE1",
+            "aliases": [
+                "BT_PRF1"
+            ]
+        },
+        "0x7794": {
+            "group": "connection",
+            "key": "QK_BLUETOOTH_PROFILE2",
+            "aliases": [
+                "BT_PRF2"
+            ]
+        },
+        "0x7795": {
+            "group": "connection",
+            "key": "QK_BLUETOOTH_PROFILE3",
+            "aliases": [
+                "BT_PRF3"
+            ]
+        },
+        "0x7796": {
+            "group": "connection",
+            "key": "QK_BLUETOOTH_PROFILE4",
+            "aliases": [
+                "BT_PRF4"
+            ]
+        },
+        "0x7797": {
+            "group": "connection",
+            "key": "QK_BLUETOOTH_PROFILE5",
+            "aliases": [
+                "BT_PRF5"
+            ]
+        },
+    }
+}

data/constants/keycodes/keycodes_0.0.6_quantum.hjson

@@ -0,0 +1,14 @@
+{
+    "keycodes": {
+        "0x7C20": "!delete!", // old QK_OUTPUT_AUTO
+        "0x7C21": "!delete!", // old QK_OUTPUT_USB
+        "0x7C22": "!delete!", // old QK_OUTPUT_BLUETOOTH
+        "0x7C7B": {
+            "group": "quantum",
+            "key": "QK_LAYER_LOCK",
+            "aliases": [
+                "QK_LLCK"
+            ]
+        }
+    }
+}

data/mappings/defaults.hjson

@@ -84,6 +84,11 @@
             "board": "STEMCELL",
             "bootloader": "tinyuf2",
             "processor": "STM32F411"
+        },
+        "svlinky": {
+            "board": "QMK_PM2040",
+            "bootloader": "rp2040",
+            "processor": "RP2040"
         }
     }
 }

data/mappings/info_config.hjson

@@ -64,6 +64,9 @@
     "WEAR_LEVELING_BACKING_SIZE": {"info_key": "eeprom.wear_leveling.backing_size", "value_type": "int", "to_json": false},
     "WEAR_LEVELING_LOGICAL_SIZE": {"info_key": "eeprom.wear_leveling.logical_size", "value_type": "int", "to_json": false},
 
+    // Layer locking
+    "LAYER_LOCK_IDLE_TIMEOUT": {"info_key": "layer_lock.timeout", "value_type": "int"},
+
     // Indicators
     "LED_CAPS_LOCK_PIN": {"info_key": "indicators.caps_lock"},
     "LED_NUM_LOCK_PIN": {"info_key": "indicators.num_lock"},
@@ -72,6 +75,11 @@
     "LED_KANA_PIN": {"info_key": "indicators.kana"},
     "LED_PIN_ON_STATE": {"info_key": "indicators.on_state", "value_type": "int"},
 
+    // Joystick
+    "JOYSTICK_AXIS_COUNT": {"info_key": "joystick.axis_count", "value_type": "int"},
+    "JOYSTICK_AXIS_RESOLUTION": {"info_key": "joystick.axis_resolution", "value_type": "int"},
+    "JOYSTICK_BUTTON_COUNT": {"info_key": "joystick.button_count", "value_type": "int"},
+
     // Leader Key
     "LEADER_PER_KEY_TIMING": {"info_key": "leader_key.timing", "value_type": "flag"},
     "LEADER_KEY_STRICT_KEY_PROCESSING": {"info_key": "leader_key.strict_processing", "value_type": "flag"},
@@ -171,7 +179,7 @@
     "SECURE_UNLOCK_TIMEOUT": {"info_key": "secure.unlock_timeout", "value_type": "int"},
 
     // Split Keyboard
-    "SOFT_SERIAL_PIN": {"info_key": "split.soft_serial_pin"},
+    "SOFT_SERIAL_PIN": {"info_key": "split.serial.pin"},
     "SOFT_SERIAL_SPEED": {"info_key": "split.soft_serial_speed"},
     "SPLIT_HAND_MATRIX_GRID": {"info_key": "split.handedness.matrix_grid", "value_type": "array", "to_c": false},
     "SPLIT_HAND_PIN": {"info_key": "split.handedness.pin"},

data/mappings/info_rules.hjson

@@ -25,6 +25,8 @@
     "ENCODER_DRIVER": {"info_key": "encoder.driver"},
     "FIRMWARE_FORMAT": {"info_key": "build.firmware_format"},
     "HAPTIC_DRIVER": {"info_key": "haptic.driver"},
+    "JOYSTICK_DRIVER": {"info_key": "joystick.driver"},
+    "JOYSTICK_ENABLE": {"info_key": "joystick.enabled", "value_type": "bool"},
     "KEYBOARD_SHARED_EP": {"info_key": "usb.shared_endpoint.keyboard", "value_type": "bool"},
     "LAYOUTS": {"info_key": "community_layouts", "value_type": "list"},
     "LED_MATRIX_DRIVER": {"info_key": "led_matrix.driver"},
@@ -41,6 +43,7 @@
     "RGB_MATRIX_DRIVER": {"info_key": "rgb_matrix.driver"},
     "RGBLIGHT_DRIVER": {"info_key": "rgblight.driver"},
     "SECURE_ENABLE": {"info_key": "secure.enabled", "value_type": "bool"},
+    "SERIAL_DRIVER": {"info_key": "split.serial.driver"},
     "SPLIT_KEYBOARD": {"info_key": "split.enabled", "value_type": "bool"},
     "SPLIT_TRANSPORT": {"info_key": "split.transport.protocol", "to_c": false},
     "STENO_ENABLE": {"info_key": "stenography.enabled", "value_type": "bool"},

data/mappings/keyboard_aliases.hjson

@@ -563,6 +563,15 @@
     "plain60": {
         "target": "evyd13/plain60"
     },
+    "planck/ez": {
+        "target": "zsa/planck_ez/base"
+    },
+    "planck/ez/base": {
+        "target": "zsa/planck_ez/base"
+    },
+    "planck/ez/glow": {
+        "target": "zsa/planck_ez/glow"
+    },
     "ploopyco/trackball": {
         "target": "ploopyco/trackball/rev1_005"
     },
@@ -1060,7 +1069,7 @@
         "target": "lyso1/lefishe"
     },
     "lets_split_eh/eh": {
-        "target": "maple_computing/lets_split_eh/eh"
+        "target": "maple_computing/lets_split_eh"
     },
     "ls_60": {
         "target": "weirdo/ls_60"
@@ -1080,6 +1089,9 @@
     "macro1": {
         "target": "laneware/macro1"
     },
+    "maple_computing/lets_split_eh/eh": {
+        "target": "maple_computing/lets_split_eh"
+    },
     "massdrop/thekey": {
         "target": "drop/thekey/v1"
     },
@@ -1137,6 +1149,12 @@
     "mt980": {
         "target": "mt/mt980"
     },
+    "mt/ncr80/hotswap": {
+        "target": "mt/ncr80/r2/hotswap"
+    },
+    "mt/ncr80/solder": {
+        "target": "mt/ncr80/r2/solder"
+    },
     "nafuda": {
         "target": "salicylic_acid3/nafuda"
     },
@@ -1347,6 +1365,12 @@
     "runner3680/5x8": {
         "target": "omkbd/runner3680/5x8"
     },
+    "saevus/cor": {
+        "target": "concreteflowers/cor"
+    },
+    "saevus/cor_tkl": {
+        "target": "concreteflowers/cor_tkl"
+    },
     "scarletbandana": {
         "target": "woodkeys/scarletbandana"
     },
@@ -1525,5 +1549,8 @@
     },
     "kprepublic/jj50": {
         "target": "kprepublic/jj50/rev1"
+    },
+    "dnworks/9973": {
+        "target": "dnworks/tkl87"
     }
 }

data/schemas/definitions.jsonschema

@@ -16,12 +16,6 @@
         "type": "object",
         "additionalProperties": {"type": "boolean"}
     },
-    "build_target": {
-        "oneOf": [
-            {"$ref": "#/keyboard_keymap_tuple"},
-            {"$ref": "#/json_file_path"}
-        ]
-    },
     "filename": {
         "type": "string",
         "minLength": 1,
@@ -53,6 +47,19 @@
             {"$ref": "#/keyboard"},
             {"$ref": "#/filename"}
         ],
+        "minItems": 2,
+        "maxItems": 2,
+        "unevaluatedItems": false
+    },
+    "keyboard_keymap_env": {
+        "type": "array",
+        "prefixItems": [
+            {"$ref": "#/keyboard"},
+            {"$ref": "#/filename"},
+            {"$ref": "#/kvp_object"}
+        ],
+        "minItems": 3,
+        "maxItems": 3,
         "unevaluatedItems": false
     },
     "keycode": {
@@ -87,6 +94,10 @@
         "maxLength": 7,
         "pattern": "^[A-Z][A-Zs_0-9]*$"
     },
+    "kvp_object": {
+        "type": "object",
+        "additionalProperties": {"type": "string"}
+    },
     "layout_macro": {
         "oneOf": [
             {

data/schemas/false.jsonschema

@@ -1 +0,0 @@
-false

data/schemas/keyboard.jsonschema

@@ -45,7 +45,7 @@
         },
         "development_board": {
             "type": "string",
-            "enum": ["promicro", "elite_c", "elite_pi", "proton_c", "kb2040", "promicro_rp2040", "blok", "michi", "bit_c_pro", "stemcell", "bluepill", "blackpill_f401", "blackpill_f411", "bonsai_c4", "helios", "liatris", "imera"]
+            "enum": ["promicro", "elite_c", "elite_pi", "proton_c", "kb2040", "promicro_rp2040", "blok", "michi", "bit_c_pro", "stemcell", "bluepill", "blackpill_f401", "blackpill_f411", "bonsai_c4", "helios", "liatris", "imera", "svlinky"]
         },
         "pin_compatible": {
             "type": "string",
@@ -92,6 +92,7 @@
                 "GD32VF103",
                 "WB32F3G71",
                 "WB32FQ95",
+                "AT32F415",
                 "atmega16u2",
                 "atmega32u2",
                 "atmega16u4",
@@ -216,6 +217,7 @@
             "type": "string",
             "enum": [
                 "apm32-dfu",
+                "at32-dfu",
                 "atmel-dfu",
                 "bootloadhid",
                 "caterina",
@@ -342,7 +344,43 @@
                 "on_state": {"$ref": "qmk.definitions.v1#/bit"}
             }
         },
+        "joystick": {
+            "type": "object",
+            "properties": {
+                "enabled": {"type": "boolean"},
+                "driver": {"type": "string"},
+                "button_count": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "axis_resolution": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                "axes": {
+                    "type": "object",
+                    "propertyNames": {"enum": ["x", "y", "z", "rx", "ry", "rz"]}
+                    "additionalProperties": {
+                        "oneOf": [
+                            {
+                                "type": "object",
+                                "properties": {
+                                    "input_pin": {"$ref": "qmk.definitions.v1#/mcu_pin"},
+                                    "low": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                                    "rest": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+                                    "high": {"$ref": "qmk.definitions.v1#/unsigned_int"}
+                                }
+                            },
+                            {
+                                "type": "string",
+                                "enum": ["virtual"]
+                            }
+                        ]
+                    }
+                }
+            }
+        },
         "keycodes": {"$ref": "qmk.definitions.v1#/keycode_decl_array"},
+        "layer_lock": {
+            "type": "object",
+            "properties": {
+                "timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"}
+            }
+        },
         "layout_aliases": {
             "type": "object",
             "additionalProperties": {"$ref": "qmk.definitions.v1#/layout_macro"}
@@ -793,12 +831,26 @@
                         }
                     }
                 },
-                "soft_serial_pin": {"$ref": "qmk.definitions.v1#/mcu_pin"},
+                "soft_serial_pin": {
+                    "$ref": "qmk.definitions.v1#/mcu_pin",
+                    "$comment": "Deprecated: use split.serial.pin instead"
+                },
                 "soft_serial_speed": {
                     "type": "integer",
                     "minimum": 0,
                     "maximum": 5
                 },
+                "serial": {
+                    "type": "object",
+                    "additionalProperties": false,
+                    "properties": {
+                        "driver": {
+                            "type": "string",
+                            "enum": ["bitbang", "usart", "vendor"]
+                        },
+                        "pin": {"$ref": "qmk.definitions.v1#/mcu_pin"}
+                    }
+                },
                 "transport": {
                     "type": "object",
                     "additionalProperties": false,

data/schemas/keymap.jsonschema

@@ -72,10 +72,5 @@
         "notes": {
             "type": "string"
         }
-    },
-    "required": [
-        "keyboard",
-        "layout",
-        "layers"
-    ]
+    }
 }

data/schemas/true.jsonschema

@@ -1 +0,0 @@
-true

data/schemas/user_repo_v1.jsonschema

@@ -3,6 +3,14 @@
     "$id": "qmk.user_repo.v1",
     "title": "User Repository Information",
     "type": "object",
+    "definitions": {
+        "build_target": {
+            "oneOf": [
+                {"$ref": "qmk.definitions.v1#/keyboard_keymap_tuple"},
+                {"$ref": "qmk.definitions.v1#/json_file_path"}
+            ]
+        },
+    },
     "required": [
         "userspace_version",
         "build_targets"
@@ -15,7 +23,7 @@
         "build_targets": {
             "type": "array",
             "items": {
-                "$ref": "qmk.definitions.v1#/build_target"
+                "$ref": "#/definitions/build_target"
             }
         }
     }

data/schemas/user_repo_v1_1.jsonschema

@@ -0,0 +1,31 @@
+{
+    "$schema": "https://json-schema.org/draft/2020-12/schema#",
+    "$id": "qmk.user_repo.v1_1",
+    "title": "User Repository Information",
+    "type": "object",
+    "definitions": {
+        "build_target": {
+            "oneOf": [
+                {"$ref": "qmk.definitions.v1#/keyboard_keymap_tuple"},
+                {"$ref": "qmk.definitions.v1#/keyboard_keymap_env"},
+                {"$ref": "qmk.definitions.v1#/json_file_path"}
+            ]
+        },
+    },
+    "required": [
+        "userspace_version",
+        "build_targets"
+    ],
+    "properties": {
+        "userspace_version": {
+            "type": "string",
+            "enum": ["1.1"]
+        },
+        "build_targets": {
+            "type": "array",
+            "items": {
+                "$ref": "#/definitions/build_target"
+            }
+        }
+    }
+}

docs/ChangeLog/20240825.md

@@ -0,0 +1,198 @@
+# QMK Breaking Changes - 2024 August 25 Changelog
+
+## Notable Features
+
+August 2024 brings another maintenance release of QMK. Almost all PRs this cycle were to do with cleanup or re-organization of existing features and code.
+
+One key item is that there are no longer any `via`-enabled keymaps in the QMK repository -- these have all transitioned to an [External Userspace](../newbs_external_userspace) repository under the VIA team's control. Going forward, all PRs to `qmk_firmware` must not contain `via` keymaps; these should instead be redirected to the [VIA QMK Userspace](https://github.com/the-via/qmk_userspace_via) repository.
+
+## Changes Requiring User Action
+
+### Updated Keyboard Codebases
+
+One note with updated keyboard names -- historical keyboard names are still considered valid when using [External Userspace](../newbs_external_userspace) for builds. If you're already using External Userspace, you do not need to move your keymap inside your repository.
+
+| Old Keyboard Name                | New Keyboard Name             |
+|----------------------------------|-------------------------------|
+| dnworks/9973                     | dnworks/tkl87                 |
+| maple_computing/lets_split_eh/eh | maple_computing/lets_split_eh |
+| planck/ez/base                   | zsa/planck_ez/base            |
+
+### SparkFun Pro Micro RP2040 converter renamed ([#24192](https://github.com/qmk/qmk_firmware/pull/24192))
+
+The converter for the SparkFun Pro Micro RP2040 has been renamed.
+
+| Old               | New               |
+|-------------------|-------------------|
+| `promicro_rp2040` | `sparkfun_rp2040` |
+
+This change was made to avoid confusion between the clones named ProMicro RP2040 and the SparkFun Pro Micro RP2040. The clones should be using the `rp2040_ce` option.
+
+### Key Override `keymap.c` signature change ([#24120](https://github.com/qmk/qmk_firmware/pull/24120))
+
+Changes were made to key overrides in order to hook them into the keymap introspection system.
+
+If you're using key overrides, your `keymap.c` will need a change to the signature of your list of key overrides, as well as removing the `NULL` terminator.
+
+For example, you'll need to change existing code from (note the highlighted lines):
+
+```c{1,4-5}
+const key_override_t **key_overrides = (const key_override_t *[]){
+    &my_override_1,
+    &my_override_2,
+    NULL
+};
+```
+
+to:
+
+```c{1,4}
+const key_override_t *key_overrides[] = {
+    &my_override_1,
+    &my_override_2,
+};
+```
+
+### ADNS9800 and PMW33xx firmware upload now opt-in ([#24001](https://github.com/qmk/qmk_firmware/pull/24001))
+
+Due to ambiguity with licensing compatibility, QMK has made the firmware ROM uploads for the ADNS9800 and PMW33xx lines of pointing device sensors temporarily opt-in with the view to removing them. Historically they were included by default, but as of this PR this is now no longer the case.
+
+Please get in touch with the QMK team if your sensor no longer functions without the firmware upload -- so far we've tested each device type and they still seem to function without a new firmware, but this has not been a 100% exhaustive validation.
+
+To re-enable firmware upload for your own builds, add the following to your keymap's `config.h`:
+
+| Sensor   | Define                         |
+|----------|--------------------------------|
+| ADNS9800 | `#define ADNS9800_UPLOAD_SROM` |
+| PMW33xx  | `#define PMW33XX_UPLOAD_SROM`  |
+
+:::info Note
+If no issues arise during this current breaking changes cycle, these sensor firmware ROMs will be removed from QMK entirely.
+:::
+
+## Deprecation Notices
+
+In line with the [notice period](../support_deprecation_policy#how-much-advance-notice-will-be-given), deprecation notices for larger items are listed here.
+
+### Migration of VIA keymaps to VIA team control
+
+Last breaking changes cycle, the QMK team informed that [`via` keymaps are moving](./20240526#migration-of-via-keymaps-to-via-team-control) to the control of the VIA team. As of this merge, any `via`-enabled keymaps should now be PR'ed to the [VIA QMK Userspace](https://github.com/the-via/qmk_userspace_via) repository.
+
+Any existing or newly-opened PRs against `qmk_firmware` will now be asked to remove any `via`-enabled keymaps from their submissions.
+
+### ADNS9800 and PMW33xx sensor firmware ROM removal
+
+As mentioned above, there's license compatibility issues between QMK and the firmware blobs historically uploaded for the ADNS9800 and PMW33xx sensors. This notice is to inform users that these firmware blobs will almost certainly be removed from QMK in the next breaking changes merge.
+
+As previously noted this does not seem to have any detrimental effect to any of those devices, as they seem to include firmware on-chip without requiring one to be uploaded. Please get in touch with the QMK team on Discord if your sensor is no longer functional.
+
+## Full changelist
+
+Core:
+* EEPROM: Don't erase if we don't have to. Adding eeprom_driver_format abstraction. ([#18332](https://github.com/qmk/qmk_firmware/pull/18332))
+* Generate keymap dd keycodes to header ([#20273](https://github.com/qmk/qmk_firmware/pull/20273))
+* [wear_leveling] efl updates ([#22489](https://github.com/qmk/qmk_firmware/pull/22489))
+* GC9xxx LCD family drivers (GC9107 and GC9A01) ([#23091](https://github.com/qmk/qmk_firmware/pull/23091))
+* [build_test] set CONSOLE_ENABLE=yes if DEBUG > 0 ([#23097](https://github.com/qmk/qmk_firmware/pull/23097))
+* Enhance overlapping mouse keys control ([#23341](https://github.com/qmk/qmk_firmware/pull/23341))
+* APA102: API rework ([#23355](https://github.com/qmk/qmk_firmware/pull/23355))
+* [WIP] Adds bus acquire/release semantics to SPI start/stop. ([#23439](https://github.com/qmk/qmk_firmware/pull/23439))
+* add farsi keymap extras ([#23650](https://github.com/qmk/qmk_firmware/pull/23650))
+* Update atomic GPIO macros in keyboard custom matrix ([#23796](https://github.com/qmk/qmk_firmware/pull/23796))
+* Check LED flags for Pixel Fractal effect ([#23881](https://github.com/qmk/qmk_firmware/pull/23881))
+* Add STM32F405RG ld script for tinyuf2 ([#23885](https://github.com/qmk/qmk_firmware/pull/23885))
+* SPI flash API cleanup, add async erase capability. ([#23894](https://github.com/qmk/qmk_firmware/pull/23894))
+* Add process_keycode handlers for new RGB Matrix and Underglow keycodes ([#23896](https://github.com/qmk/qmk_firmware/pull/23896))
+* Decouple VIA from STM32 L0/L1 EEPROM implementation ([#23901](https://github.com/qmk/qmk_firmware/pull/23901))
+* Normalise mouse keycodes ([#23975](https://github.com/qmk/qmk_firmware/pull/23975))
+* Remove deprecated `led_set_user` ([#23979](https://github.com/qmk/qmk_firmware/pull/23979))
+* Change ADNS9800 and PMW33XX SROM uploads to opt in. ([#24001](https://github.com/qmk/qmk_firmware/pull/24001))
+* Rename encoder pins defines ([#24003](https://github.com/qmk/qmk_firmware/pull/24003))
+* Change suspend condition check order on ChibiOS ([#24020](https://github.com/qmk/qmk_firmware/pull/24020))
+* Tap dance introspection ([#24049](https://github.com/qmk/qmk_firmware/pull/24049))
+* Allow overriding `get_hardware_id()`. ([#24051](https://github.com/qmk/qmk_firmware/pull/24051))
+* Align LUFA suspend logic ([#24055](https://github.com/qmk/qmk_firmware/pull/24055))
+* Add support for key override introspection. ([#24120](https://github.com/qmk/qmk_firmware/pull/24120))
+* Dynamic macro callbacks ([#24142](https://github.com/qmk/qmk_firmware/pull/24142))
+* Rename promicro_rp2040 converter to sparkfun_pm2040 ([#24192](https://github.com/qmk/qmk_firmware/pull/24192))
+* Refactor starlight RGB matrix effects ([#24202](https://github.com/qmk/qmk_firmware/pull/24202))
+* Refactor riverflow RGB matrix loop ([#24203](https://github.com/qmk/qmk_firmware/pull/24203))
+
+CLI:
+* Remove handling of keyboard level keymap templates ([#24234](https://github.com/qmk/qmk_firmware/pull/24234))
+* Small tweaks to keymap generation ([#24240](https://github.com/qmk/qmk_firmware/pull/24240))
+
+Keyboards:
+* refactor: keyboard/ncr80/r2 ([#22670](https://github.com/qmk/qmk_firmware/pull/22670))
+* Implement data driven joysticks ([#22947](https://github.com/qmk/qmk_firmware/pull/22947))
+* Whitefacemountain Ampersand ([#23437](https://github.com/qmk/qmk_firmware/pull/23437))
+* Add TRKeyboard TRK1 keyboard ([#23642](https://github.com/qmk/qmk_firmware/pull/23642))
+* Rename dnworks/9973 to dnworks/tkl87 ([#23692](https://github.com/qmk/qmk_firmware/pull/23692))
+* Update Underglow keycodes ([#23765](https://github.com/qmk/qmk_firmware/pull/23765))
+* Add boardsource/the_q ([#23782](https://github.com/qmk/qmk_firmware/pull/23782))
+* BastardKB: remove legacy board `tbk` ([#23818](https://github.com/qmk/qmk_firmware/pull/23818))
+* Update ZSA Moonlander ([#23911](https://github.com/qmk/qmk_firmware/pull/23911))
+* Move Planck EZ to ZSA vendor folder ([#23917](https://github.com/qmk/qmk_firmware/pull/23917))
+* Migrate SPLIT_HAND_PIN to json ([#23924](https://github.com/qmk/qmk_firmware/pull/23924))
+* Migrate SERIAL_DRIVER to json ([#23925](https://github.com/qmk/qmk_firmware/pull/23925))
+* Migrate RGB Matrix layout for two boards ([#23963](https://github.com/qmk/qmk_firmware/pull/23963))
+* Migrate `led_update_kb` implementations to DD ([#23980](https://github.com/qmk/qmk_firmware/pull/23980))
+* Migrate `led_update_kb` implementations to DD ([#23981](https://github.com/qmk/qmk_firmware/pull/23981))
+* Migrate `led_update_kb` implementations to DD ([#23983](https://github.com/qmk/qmk_firmware/pull/23983))
+* Migrate `led_update_kb` implementations to DD ([#23985](https://github.com/qmk/qmk_firmware/pull/23985))
+* Relocate m256wh VIA logic ([#24006](https://github.com/qmk/qmk_firmware/pull/24006))
+* Relocate winry315 VIA logic ([#24008](https://github.com/qmk/qmk_firmware/pull/24008))
+* Relocate m256ws VIA logic ([#24009](https://github.com/qmk/qmk_firmware/pull/24009))
+* `atreus`: misc cleanups ([#24010](https://github.com/qmk/qmk_firmware/pull/24010))
+* Relocate work_louder VIA logic ([#24011](https://github.com/qmk/qmk_firmware/pull/24011))
+* Relocate xelus/pachi/rgb/rev2 VIA logic ([#24016](https://github.com/qmk/qmk_firmware/pull/24016))
+* Remove custom keycodes from nullbitsco/snap ([#24017](https://github.com/qmk/qmk_firmware/pull/24017))
+* added bear_face/v3 ([#24032](https://github.com/qmk/qmk_firmware/pull/24032))
+* Remove DEFAULT_FOLDER from maple_computing/lets_split_eh ([#24054](https://github.com/qmk/qmk_firmware/pull/24054))
+* refactor bear_face/v1, v2 ([#24060](https://github.com/qmk/qmk_firmware/pull/24060))
+* Convert `eeconfig_init_kb` implementations to config ([#24087](https://github.com/qmk/qmk_firmware/pull/24087))
+* Remove broken keymap from keebio/iris ([#24094](https://github.com/qmk/qmk_firmware/pull/24094))
+* Move LED Matrix LED config to data driven ([#24122](https://github.com/qmk/qmk_firmware/pull/24122))
+* Move split.soft_serial_pin to split.serial.pin ([#24127](https://github.com/qmk/qmk_firmware/pull/24127))
+* Remove pointless `RGB_MATRIX_LED_COUNT`s ([#24133](https://github.com/qmk/qmk_firmware/pull/24133))
+* `hs60/v1`: separate into ANSI and ISO revisions ([#24136](https://github.com/qmk/qmk_firmware/pull/24136))
+* Migrate half-duplex `SERIAL_USART_TX_PIN` to DD ([#24143](https://github.com/qmk/qmk_firmware/pull/24143))
+* Migrate split.soft_serial_pin to split.serial.pin O-Z ([#24146](https://github.com/qmk/qmk_firmware/pull/24146))
+* Migrate split.soft_serial_pin to split.serial.pin 0-H ([#24155](https://github.com/qmk/qmk_firmware/pull/24155))
+* Remove instances of MASTER_LEFT. ([#24163](https://github.com/qmk/qmk_firmware/pull/24163))
+* Rename EC Type-K ([#24180](https://github.com/qmk/qmk_firmware/pull/24180))
+* Migrate split.soft_serial_pin to split.serial.pin H-O ([#24185](https://github.com/qmk/qmk_firmware/pull/24185))
+* Remove split.transport.protocol=serial ([#24191](https://github.com/qmk/qmk_firmware/pull/24191))
+* Refactor use of `matrix_scan_kb` ([#24200](https://github.com/qmk/qmk_firmware/pull/24200))
+* Eliminate use of `#include "../default/keymap.c"`. ([#24215](https://github.com/qmk/qmk_firmware/pull/24215))
+* Remove keyboard level `QK_BOOT` implementations ([#24231](https://github.com/qmk/qmk_firmware/pull/24231))
+* Remove `handwired/pytest/has_template` ([#24232](https://github.com/qmk/qmk_firmware/pull/24232))
+* Refactor opendeck/32 ([#24233](https://github.com/qmk/qmk_firmware/pull/24233))
+* Refactor printedpad ([#24236](https://github.com/qmk/qmk_firmware/pull/24236))
+* Refactor orthocode ([#24237](https://github.com/qmk/qmk_firmware/pull/24237))
+* Remove unnecessary RGB Matrix shutdown hooks ([#24238](https://github.com/qmk/qmk_firmware/pull/24238))
+* Remove all via-enabled keymaps, including `via`. ([#24322](https://github.com/qmk/qmk_firmware/pull/24322))
+
+Keyboard fixes:
+* Fix dogtag/info.json ([#23520](https://github.com/qmk/qmk_firmware/pull/23520))
+* splitkb/kyria: remove `CONVERT_TO` at keyboard level ([#23857](https://github.com/qmk/qmk_firmware/pull/23857))
+* Fixup mt/mt84 ([#23883](https://github.com/qmk/qmk_firmware/pull/23883))
+* Fix for encoders and support ENCODER_MAP_ENABLE on Planck rev7 ([#23967](https://github.com/qmk/qmk_firmware/pull/23967))
+* `handwired/swiftrax/bumblebee`: fix layout name ([#24064](https://github.com/qmk/qmk_firmware/pull/24064))
+* Fixup boardsource/the_q RGB matrix coordinates ([#24086](https://github.com/qmk/qmk_firmware/pull/24086))
+* Various fixes for keyboards not implementing callbacks correctly ([#24092](https://github.com/qmk/qmk_firmware/pull/24092))
+* Various fixes for keyboards not implementing callbacks correctly ([#24116](https://github.com/qmk/qmk_firmware/pull/24116))
+* Remove duplicate calls to `housekeeping_task_user` ([#24201](https://github.com/qmk/qmk_firmware/pull/24201))
+* Fixup `handwired/dactyl_minidox` ([#24253](https://github.com/qmk/qmk_firmware/pull/24253))
+* Fix build failure on zsa/moonlander with DYNAMIC_MACRO_ENABLE ([#24316](https://github.com/qmk/qmk_firmware/pull/24316))
+
+Others:
+* LED drivers: extract documentation from LED/RGB Matrix pages ([#23630](https://github.com/qmk/qmk_firmware/pull/23630))
+* Implement data driven serial driver ([#23923](https://github.com/qmk/qmk_firmware/pull/23923))
+* Remove skipped schema files ([#23987](https://github.com/qmk/qmk_firmware/pull/23987))
+* Update RGBLight (Underglow) keycode names ([#23999](https://github.com/qmk/qmk_firmware/pull/23999))
+
+Bugs:
+* Fix NKRO and Mouse Emulation on arm_atsam ([#23945](https://github.com/qmk/qmk_firmware/pull/23945))
+* Force `dump_lines()` to always use Unix line endings ([#23954](https://github.com/qmk/qmk_firmware/pull/23954))
+* Fixup home link. ([#24068](https://github.com/qmk/qmk_firmware/pull/24068))

docs/ChangeLog/20241124.md

@@ -0,0 +1,122 @@
+# QMK Breaking Changes - 2024 November 24 Changelog
+
+## Notable Features
+
+November 2024 brings a relatively lightweight QMK release. As with previous cycles, almost all PRs were related to cleanup or re-organization of aspects of QMK.
+
+One notable item is the removal of `arm_atsam` -- this affects users with `massdrop/ctrl` or `massdrop/alt` keyboards. These have no current replacement, but support for an alternative to the `arm_atsam` backend is nearing completion. Unfortunately the alternative backend didn't make this quarter's list of merges, so there's a temporary removal of these boards. Users who need to build for these targets should stay on the `0.26.x` version of QMK until these boards have been restored.
+
+## Changes Requiring User Action
+
+### Updated Keyboard Codebases
+
+One note with updated keyboard names -- historical keyboard names are still considered valid when using [External Userspace](../newbs_external_userspace) for builds. If you're already using External Userspace, you do not need to move your keymap inside your repository.
+
+| Old Keyboard Name | New Keyboard Name       |
+|-------------------|-------------------------|
+| saevus/cor        | concreteflowers/cor     |
+| saevus/cor_tkl    | concreteflowers/cor_tkl |
+
+## Deprecation Notices
+
+In line with the [notice period](../support_deprecation_policy#how-much-advance-notice-will-be-given), deprecation notices for larger items are listed here.
+
+### RGB Keycode Overhaul ([#23679](https://github.com/qmk/qmk_firmware/pull/23679), [#24484](https://github.com/qmk/qmk_firmware/pull/24484), [#24490](https://github.com/qmk/qmk_firmware/pull/24490))
+
+RGB keycodes have been reworked to allow for both rgblight and rgb_matrix to coexist for the handful of boards in the repo with both enabled. Previously, `RGB_xxx` style keycodes were available, but now for rgblight we have `UG_xxx` (underglow), and `RM_xxx` for rgb_matrix. Default keymaps have been updated to reflect whichever system the respective board enables.
+
+Longer-term, `RGB_xxx` style keycodes will be removed, but for now they act as if they're `UG_xxx`, and `UG_xxx` keycodes act upon both rgblight and rgb_matrix simultaneously. Put simply, the existing `RGB_xxx` keycodes act as they always have, giving users time to transition across to the new keycodes instead.
+
+### ADNS9800 and PMW33xx sensor firmware ROM removal ([#24428](https://github.com/qmk/qmk_firmware/pull/24428))
+
+Following on from the last Breaking Changes cycle, Binary blobs for optical sensors have been removed from the QMK codebase. Hooks allowing users to supply their own have been put in place; users wishing to source firmware blobs and integrate them into their keymap may do so. Doing so renders their firmware un-distributable due to licensing incompatibility with the GPL -- as such user firmware containing such blobs must not be distributed.
+
+Please get in touch with the QMK team on Discord if your sensor is no longer functional.
+
+## Full changelist
+
+Core:
+* Refactor F4 ld files to use common files ([#18059](https://github.com/qmk/qmk_firmware/pull/18059))
+* Add LD7032 support to QP. ([#20828](https://github.com/qmk/qmk_firmware/pull/20828))
+* Add combo key repress feature ([#22858](https://github.com/qmk/qmk_firmware/pull/22858))
+* Add Layer Lock feature ([#23430](https://github.com/qmk/qmk_firmware/pull/23430))
+* Added MCU support for ArteryTek AT32F415 ([#23445](https://github.com/qmk/qmk_firmware/pull/23445))
+* Allow codegen of `keymap.json` => `keymap.c` without requiring layers/layout etc. ([#23451](https://github.com/qmk/qmk_firmware/pull/23451))
+* Separate RGBLight/RGB Matrix keycode handling ([#23679](https://github.com/qmk/qmk_firmware/pull/23679))
+* Allow for inverted SPI CS logic ([#23699](https://github.com/qmk/qmk_firmware/pull/23699))
+* Add timer_save and _restore functions. ([#23887](https://github.com/qmk/qmk_firmware/pull/23887))
+* Allow for `get_hardware_id()` to be used for serial number. ([#24053](https://github.com/qmk/qmk_firmware/pull/24053))
+* Segregrate keycode at pre-process record quantum ([#24194](https://github.com/qmk/qmk_firmware/pull/24194))
+* Add ability to poweroff ADNS5050 sensor ([#24223](https://github.com/qmk/qmk_firmware/pull/24223))
+* quantum: util: add bit and bitmask helpers ([#24229](https://github.com/qmk/qmk_firmware/pull/24229))
+* Add new connection keycodes for Bluetooth, 2.4GHz. ([#24251](https://github.com/qmk/qmk_firmware/pull/24251))
+* `usb_device_state`: consolidate usb state handling across implementations ([#24258](https://github.com/qmk/qmk_firmware/pull/24258))
+* Remove global k_rgb_matrix_split ([#24348](https://github.com/qmk/qmk_firmware/pull/24348))
+* util: uf2families: sync with upstream ([#24351](https://github.com/qmk/qmk_firmware/pull/24351))
+* [Maintenance] builddefs: common_rules: overhaul debug information generation ([#24352](https://github.com/qmk/qmk_firmware/pull/24352))
+* Add easier way to set default single layer ([#24376](https://github.com/qmk/qmk_firmware/pull/24376))
+* Tweak OS detect, add OS_DETECTION_SINGLE_REPORT ([#24379](https://github.com/qmk/qmk_firmware/pull/24379))
+* Reinstate global `k_rgb_matrix_split` ([#24388](https://github.com/qmk/qmk_firmware/pull/24388))
+* Bring supported STM32F4 configs in line with F4x1 ([#24413](https://github.com/qmk/qmk_firmware/pull/24413))
+* Extended wheel reports ([#24422](https://github.com/qmk/qmk_firmware/pull/24422))
+* Remove binary blobs from optical sensors. ([#24428](https://github.com/qmk/qmk_firmware/pull/24428))
+* Remove `STM32_PWM_USE_ADVANCED` references ([#24432](https://github.com/qmk/qmk_firmware/pull/24432))
+* Remove `RING_BUFFERED_6KRO_REPORT_ENABLE` due to disuse. ([#24433](https://github.com/qmk/qmk_firmware/pull/24433))
+* Move pointing device driver code ([#24445](https://github.com/qmk/qmk_firmware/pull/24445))
+* Add svlinky converter ([#24449](https://github.com/qmk/qmk_firmware/pull/24449))
+* Update combo user function variable ([#24467](https://github.com/qmk/qmk_firmware/pull/24467))
+* `qmk find`: expand operator support ([#24468](https://github.com/qmk/qmk_firmware/pull/24468))
+* Rename RGB and HSV structs ([#24471](https://github.com/qmk/qmk_firmware/pull/24471))
+* RGBLight: Improve RGB Test animation ([#24477](https://github.com/qmk/qmk_firmware/pull/24477))
+* Change default ARM hardware PWM WS2812 tick frequency to 800kHz ([#24508](https://github.com/qmk/qmk_firmware/pull/24508))
+* Add pointing tests ([#24513](https://github.com/qmk/qmk_firmware/pull/24513))
+* Joystick: add support for 8-way hat switch ([#24515](https://github.com/qmk/qmk_firmware/pull/24515))
+* Refactor Riverflow matrix effect with runner ([#24520](https://github.com/qmk/qmk_firmware/pull/24520))
+* Update Pixel Rain to respect LED range limits ([#24532](https://github.com/qmk/qmk_firmware/pull/24532))
+* Update Jellybean Raindrops to respect LED range limits ([#24534](https://github.com/qmk/qmk_firmware/pull/24534))
+* Refactor Breathing effect with runner ([#24535](https://github.com/qmk/qmk_firmware/pull/24535))
+* Refactor LED Breathing effect with runner ([#24540](https://github.com/qmk/qmk_firmware/pull/24540))
+* Expose rgb_matrix_update_pwm_buffers to be available in keymaps ([#24573](https://github.com/qmk/qmk_firmware/pull/24573))
+* Simple Python script to show polling rate ([#24622](https://github.com/qmk/qmk_firmware/pull/24622))
+* Add keycode PDF(layer) to set the default layer in EEPROM ([#24630](https://github.com/qmk/qmk_firmware/pull/24630))
+* Provide method to save a single default layer in the full range of 0-31 ([#24639](https://github.com/qmk/qmk_firmware/pull/24639))
+
+CLI:
+* Refactor painter arguments to table instead of commandline ([#24456](https://github.com/qmk/qmk_firmware/pull/24456))
+* `qmk new-keyboard`: separate dev board and MCU selection ([#24548](https://github.com/qmk/qmk_firmware/pull/24548))
+* Bump minimum required Python version ([#24554](https://github.com/qmk/qmk_firmware/pull/24554))
+
+Submodule updates:
+* Remove `arm_atsam` platform ([#24337](https://github.com/qmk/qmk_firmware/pull/24337))
+
+Keyboards:
+* add ergodox Community Layout for LAYOUT_ergodox keyboards ([#22963](https://github.com/qmk/qmk_firmware/pull/22963))
+* Cutie Club Fidelity Layout Additions ([#23838](https://github.com/qmk/qmk_firmware/pull/23838))
+* Add Ploopyco functions for host state control ([#23953](https://github.com/qmk/qmk_firmware/pull/23953))
+* Corne rev4 ([#24084](https://github.com/qmk/qmk_firmware/pull/24084))
+* Rename saevus to concreteflowers ([#24249](https://github.com/qmk/qmk_firmware/pull/24249))
+* Remove `60_tsangan_hhkb` community layout ([#24355](https://github.com/qmk/qmk_firmware/pull/24355))
+* add USART configuration to config.h for PS/2 mouse support ([#24398](https://github.com/qmk/qmk_firmware/pull/24398))
+* Add SteelSeries Prime+ mouse ([#24408](https://github.com/qmk/qmk_firmware/pull/24408))
+* Rename RGB/HSV structs: keyboard-level code ([#24476](https://github.com/qmk/qmk_firmware/pull/24476))
+* xiudi/xd002: Remove broken oversized `multilayer_rgb` keymap ([#24480](https://github.com/qmk/qmk_firmware/pull/24480))
+* Update keycodes for keyboards with RGB Matrix ([#24484](https://github.com/qmk/qmk_firmware/pull/24484))
+* Cipulot Updates ([#24539](https://github.com/qmk/qmk_firmware/pull/24539))
+* Update keymaps to use PDF keycode ([#24633](https://github.com/qmk/qmk_firmware/pull/24633))
+* Remove keyboard use of eeconfig_read_default_layer ([#24635](https://github.com/qmk/qmk_firmware/pull/24635))
+
+Keyboard fixes:
+* Fix rendering of `keymap_config.no_gui` within `led_update_kb` ([#24473](https://github.com/qmk/qmk_firmware/pull/24473))
+* Fix duplication of core `GU_TOGG` keycode ([#24474](https://github.com/qmk/qmk_firmware/pull/24474))
+* keebio/nyquist: Remove invalid I2C config ([#24479](https://github.com/qmk/qmk_firmware/pull/24479))
+* horrortroll/nyx/rev1: Fix compilation of custom RGB effect ([#24481](https://github.com/qmk/qmk_firmware/pull/24481))
+
+Others:
+* Improve consistency of syntax within `data/constants/keycodes` ([#24528](https://github.com/qmk/qmk_firmware/pull/24528))
+
+Bugs:
+* WS2812 API rework ([#24364](https://github.com/qmk/qmk_firmware/pull/24364))
+* Backward compatibility for new RGB keycode handling ([#24490](https://github.com/qmk/qmk_firmware/pull/24490))
+* Fix compiliation issues with OS Detection ([#24502](https://github.com/qmk/qmk_firmware/pull/24502))
+* Revert removal of `QK_OUTPUT_AUTO`, fixup docs to reflect. ([#24593](https://github.com/qmk/qmk_firmware/pull/24593))
+* Review fixes for layer lock feature ([#24627](https://github.com/qmk/qmk_firmware/pull/24627))

docs/_aliases.json

@@ -16,6 +16,8 @@
     "/tutorial": "/newbs",
     "/unicode": "/feature_unicode",
 
+    "/features/bluetooth": "/features/wireless",
+
     "/adc_driver": "/drivers/adc",
     "/apa102_driver": "/drivers/apa102",
     "/audio_driver": "/drivers/audio",
@@ -24,7 +26,7 @@
     "/feature_auto_shift": "/features/auto_shift",
     "/feature_autocorrect": "/features/autocorrect",
     "/feature_backlight": "/features/backlight",
-    "/feature_bluetooth": "/features/bluetooth",
+    "/feature_bluetooth": "/features/wireless",
     "/feature_bootmagic": "/features/bootmagic",
     "/feature_caps_word": "/features/caps_word",
     "/feature_combo": "/features/combo",

docs/_sidebar.json

@@ -21,7 +21,8 @@
             { "text": "Debugging QMK", "link": "/faq_debug" },
             { "text": "Keymap FAQ", "link": "/faq_keymap" },
             { "text": "Squeezing Space from AVR", "link": "/squeezing_avr" },
-            { "text": "Glossary", "link": "/reference_glossary" }
+            { "text": "Glossary", "link": "/reference_glossary" },
+            { "text": "License Violations", "link": "/license_violations" }
         ]
     },
     {
@@ -123,6 +124,7 @@
                     { "text": "Key Lock", "link": "/features/key_lock" },
                     { "text": "Key Overrides", "link": "/features/key_overrides" },
                     { "text": "Layers", "link": "/feature_layers" },
+                    { "text": "Layer Lock", "link": "/features/layer_lock" },
                     { "text": "One Shot Keys", "link": "/one_shot_keys" },
                     { "text": "OS Detection", "link": "/features/os_detection" },
                     { "text": "Raw HID", "link": "/features/rawhid" },
@@ -166,8 +168,7 @@
                         ]
                     },
                     { "text": "Audio", "link": "/features/audio" },
-                    { "text": "Bluetooth", "link": "/features/bluetooth" },
-                    { "text": "Bootmagic Lite", "link": "/features/bootmagic" },
+                    { "text": "Bootmagic", "link": "/features/bootmagic" },
                     { "text": "Converters", "link": "/feature_converters" },
                     { "text": "Custom Matrix", "link": "/custom_matrix" },
                     { "text": "DIP Switch", "link": "/features/dip_switch" },
@@ -179,7 +180,8 @@
                     { "text": "Pointing Device", "link": "/features/pointing_device" },
                     { "text": "PS/2 Mouse", "link": "/features/ps2_mouse" },
                     { "text": "Split Keyboard", "link": "/features/split_keyboard" },
-                    { "text": "Stenography", "link": "/features/stenography" }
+                    { "text": "Stenography", "link": "/features/stenography" },
+                    { "text": "Wireless", "link": "/features/wireless" }
                 ]
             },
             {
@@ -204,7 +206,7 @@
                     { "text": "My Pull Request Was Flagged", "link": "/breaking_changes_instructions" },
                     {
                         "text": "Most Recent ChangeLog",
-                        "link": "/ChangeLog/20240526"
+                        "link": "/ChangeLog/20241124"
                     },
                     { "text": "Past Breaking Changes", "link": "/breaking_changes_history" },
                     { "text": "Deprecation Policy", "link": "/support_deprecation_policy" }

docs/api_development_overview.md

@@ -4,7 +4,7 @@ This page attempts to introduce developers to the QMK Compiler. It does not go i
 
 # Overview
 
-The QMK Compile API consists of a few movings parts:
+The QMK Compile API consists of a few moving parts:
 
 ![Architecture Diagram](https://raw.githubusercontent.com/qmk/qmk_api/master/docs/architecture.svg)
 

docs/breaking_changes.md

@@ -10,25 +10,25 @@ Practically, this means QMK merges the `develop` branch into the `master` branch
 
 ## What has been included in past Breaking Changes?
 
+* [2024 Nov 24](ChangeLog/20241124)
+* [2024 Aug 25](ChangeLog/20240825)
 * [2024 May 26](ChangeLog/20240526)
-* [2024 Feb 25](ChangeLog/20240225)
-* [2023 Nov 26](ChangeLog/20231126)
 * [Older Breaking Changes](breaking_changes_history)
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for August 25, 2024.
+The next Breaking Change is scheduled for February 23, 2025.
 
 ### Important Dates
 
-* 2024 May 26 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
-* 2024 Jul 28 - `develop` closed to new PRs.
-* 2024 Jul 28 - Call for testers.
-* 2024 Aug 4 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes
-* 2024 Aug 18 - `develop` is locked, only critical bugfix PRs merged.
-* 2024 Aug 22 - `master` is locked, no PRs merged.
-* 2024 Aug 25 - Merge `develop` to `master`.
-* 2024 Aug 25 - `master` is unlocked. PRs can be merged again.
+* 2024 Nov 24 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
+* 2025 Jan 26 - `develop` closed to new PRs.
+* 2025 Jan 26 - Call for testers.
+* 2025 Feb 9 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes
+* 2025 Feb 16 - `develop` is locked, only critical bugfix PRs merged.
+* 2024 Nov 21 - `master` is locked, no PRs merged.
+* 2025 Feb 23 - Merge `develop` to `master`.
+* 2025 Feb 23 - `master` is unlocked. PRs can be merged again.
 
 ## What changes will be included?
 
@@ -48,7 +48,7 @@ Criteria for acceptance:
 
 Strongly suggested:
 
-* The PR has a ChangeLog file describing the changes under `<qmk_firmware>/docs/Changelog/20240526`.
+* The PR has a ChangeLog file describing the changes under `<qmk_firmware>/docs/Changelog/20241124`.
     * This should be in Markdown format, with a name in the format `PR12345.md`, substituting the digits for your PRs ID.
     * One strong recommendation that the ChangeLog document matches the PR description on GitHub, so as to ensure traceability.
 

docs/breaking_changes_history.md

@@ -2,6 +2,8 @@
 
 This page links to all previous changelogs from the QMK Breaking Changes process.
 
+* [2024 Nov 24](ChangeLog/20241124) - version 0.27.0
+* [2024 Aug 25](ChangeLog/20240825) - version 0.26.0
 * [2024 May 26](ChangeLog/20240526) - version 0.25.0
 * [2024 Feb 25](ChangeLog/20240225) - version 0.24.0
 * [2023 Nov 26](ChangeLog/20231126) - version 0.23.0

docs/breaking_changes_instructions.md

@@ -31,4 +31,4 @@ Commenting on your pull request and being responsive to questions, comments, and
 
 ### Ask for Help
 
-Having your submission flagged may have caught you off guard. If you find yourself intimidated or overwhelmed, let us know. Comment on your pull request, or [reach out to the QMK team on Discord](https://discord.gg/Uq7gcHh).
+Having your submission flagged may have caught you off guard. If you find yourself intimidated or overwhelmed, let us know. Comment on your pull request, or [reach out to the QMK team on Discord](https://discord.gg/qmk).

docs/cli_commands.md

@@ -153,20 +153,26 @@ qmk cd
 
 This command allows for searching through keyboard/keymap targets, filtering by specific criteria. `info.json` and `rules.mk` files contribute to the search data, as well as keymap configurations, and the results can be filtered using "dotty" syntax matching the overall `info.json` file format.
 
-For example, one could search for all keyboards using STM32F411:
+For example, one could search for all keyboards powered by the STM32F411 microcontroller:
 
 ```
-qmk find -f 'processor=STM32F411'
+qmk find -f 'processor==STM32F411'
 ```
 
-...and one can further constrain the list to keyboards using STM32F411 as well as rgb_matrix support:
+The list can be further constrained by passing additional filter expressions:
 
 ```
-qmk find -f 'processor=STM32F411' -f 'features.rgb_matrix=true'
+qmk find -f 'processor==STM32F411' -f 'features.rgb_matrix==true'
 ```
 
-The following filter expressions are also supported:
+The following filter expressions are supported:
 
+ - `key == value`: Match targets where `key` is equal to `value`. May include wildcards such as `*` and `?`.
+ - `key != value`: Match targets where `key` is not `value`. May include wildcards such as `*` and `?`.
+ - `key < value`: Match targets where `key` is a number less than `value`.
+ - `key > value`: Match targets where `key` is a number greater than `value`.
+ - `key <= value`: Match targets where `key` is a number less than or equal to `value`.
+ - `key >= value`: Match targets where `key` is a number greater than or equal to `value`.
  - `exists(key)`: Match targets where `key` is present.
  - `absent(key)`: Match targets where `key` is not present.
  - `contains(key, value)`: Match targets where `key` contains `value`. Can be used for strings, arrays and object keys.
@@ -175,7 +181,7 @@ The following filter expressions are also supported:
 You can also list arbitrary values for each matched target with `--print`:
 
 ```
-qmk find -f 'processor=STM32F411' -p 'keyboard_name' -p 'features.rgb_matrix'
+qmk find -f 'processor==STM32F411' -p 'keyboard_name' -p 'features.rgb_matrix'
 ```
 
 **Usage**:

docs/compatible_microcontrollers.md

@@ -57,6 +57,10 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
  * [WB32F3G71xx](http://www.westberrytech.com)
  * [WB32FQ95xx](http://www.westberrytech.com)
 
+### Artery (AT32)
+
+ * [AT32F415](https://www.arterychip.com/en/product/AT32F415.jsp)
+
 ### NXP (Kinetis)
 
  * [MKL26Z64](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/kl-series-cortex-m0-plus/kinetis-kl2x-72-96-mhz-usb-ultra-low-power-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:KL2x)
@@ -75,10 +79,6 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
 
 For a detailed overview about the RP2040 support by QMK see the [dedicated RP2040 page](platformdev_rp2040).
 
-## Atmel ATSAM
-
-There is limited support for one of Atmel's ATSAM microcontrollers, that being the [ATSAMD51J18A](https://www.microchip.com/wwwproducts/en/ATSAMD51J18A) used by the [Massdrop keyboards](https://github.com/qmk/qmk_firmware/tree/master/keyboards/massdrop). However, it is not recommended to design a board with this microcontroller as the support is quite specialized to Massdrop hardware.
-
 ## RISC-V
 
 ### GigaDevice

docs/config_options.md

@@ -413,7 +413,7 @@ Use these to enable or disable building certain features. The more you have enab
 * `MAGIC_ENABLE`
   * MAGIC actions (BOOTMAGIC without the boot)
 * `BOOTMAGIC_ENABLE`
-  * Enable Bootmagic Lite
+  * Enable Bootmagic
 * `MOUSEKEY_ENABLE`
   * Mouse keys
 * `EXTRAKEY_ENABLE`
@@ -426,8 +426,6 @@ Use these to enable or disable building certain features. The more you have enab
   * Key combo feature
 * `NKRO_ENABLE`
   * USB N-Key Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-* `RING_BUFFERED_6KRO_REPORT_ENABLE`
-  * USB 6-Key Rollover - Instead of stopping any new input once 6 keys are pressed, the oldest key is released and the new key is pressed.
 * `AUDIO_ENABLE`
   * Enable the audio subsystem.
 * `KEY_OVERRIDE_ENABLE`

docs/configurator_default_keymaps.md

@@ -54,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_RGUI, KC_RCTL,             KC_LEFT, KC_DOWN, KC_RGHT),
 
   [1] = LAYOUT_all(
-    KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI,             BL_TOGG, BL_DOWN, BL_UP,
+    KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, UG_TOGG, UG_NEXT, UG_HUED, UG_HUEU,          UG_SATD, UG_SATU, UG_VALD, UG_VALU,    BL_TOGG, BL_DOWN, BL_UP, 
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_VOLU,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,             KC_MPLY, KC_MNXT, KC_VOLD,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
@@ -82,7 +82,7 @@ The default keymap uses the `LAYOUT_all` macro, so that will be the value of the
       "KC_LCTL", "KC_LGUI", "KC_LALT",                                  "KC_SPC",                                   "KC_RALT", "MO(1)",   "KC_RGUI", "KC_RCTL",               "KC_LEFT", "KC_DOWN", "KC_RGHT"
     ],
     [
-      "KC_TRNS",            "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "RGB_TOG", "RGB_MOD", "RGB_HUD", "RGB_HUI", "RGB_SAD", "RGB_SAI", "RGB_VAD", "RGB_VAI",               "BL_TOGG", "BL_DOWN", "BL_UP",
+      "KC_TRNS",            "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "UG_TOGG", "UG_NEXT", "UG_HUED", "UG_HUEU", "UG_SATD", "UG_SATU", "UG_VALD", "UG_VALU",               "BL_TOGG", "BL_DOWN", "BL_UP",
       "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",    "KC_TRNS", "KC_TRNS", "KC_VOLU",
       "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "QK_BOOT", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",               "KC_MPLY", "KC_MNXT", "KC_VOLD",
       "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",

docs/contributing.md

@@ -11,7 +11,7 @@ Third-party contributions help us grow and improve QMK. We want to make the pull
 
 ## I Don't Want to Read This Whole Thing! I Just Have a Question!
 
-If you'd like to ask questions about QMK you can do so on the [OLKB Subreddit](https://reddit.com/r/olkb) or on [Discord](https://discord.gg/Uq7gcHh).
+If you'd like to ask questions about QMK you can do so on the [OLKB Subreddit](https://reddit.com/r/olkb) or on [Discord](https://discord.gg/qmk).
 
 Please keep these things in mind:
 
@@ -29,7 +29,7 @@ QMK is largely written in C, with specific features and parts written in C++. It
 
 # Where Can I Go for Help?
 
-If you need help you can [open an issue](https://github.com/qmk/qmk_firmware/issues) or [chat on Discord](https://discord.gg/Uq7gcHh).
+If you need help you can [open an issue](https://github.com/qmk/qmk_firmware/issues) or [chat on Discord](https://discord.gg/qmk).
 
 # How Do I Make a Contribution?
 
@@ -128,7 +128,7 @@ We also ask that you follow these guidelines:
 
 Before you put a lot of work into building your new feature you should make sure you are implementing it in the best way. You can get a basic understanding of QMK by reading [Understanding QMK](understanding_qmk), which will take you on a tour of the QMK program flow. From here you should talk to us to get a sense of the best way to implement your idea. There are two main ways to do this:
 
-* [Chat on Discord](https://discord.gg/Uq7gcHh)
+* [Chat on Discord](https://discord.gg/qmk)
 * [Open an Issue](https://github.com/qmk/qmk_firmware/issues/new)
 
 Feature and Bug Fix PRs affect all keyboards. We are also in the process of restructuring QMK. For this reason it is especially important for significant changes to be discussed before implementation has happened. If you open a PR without talking to us first please be prepared to do some significant rework if your choices do not mesh well with our planned direction.

docs/custom_quantum_functions.md

@@ -184,7 +184,7 @@ Whenever possible you should customize your keyboard by using `process_record_*(
 
 ### Example `matrix_scan_*` Implementation
 
-This example has been deliberately omitted. You should understand enough about QMK internals to write this without an example before hooking into such a performance sensitive area. If you need help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) or [chat with us on Discord](https://discord.gg/Uq7gcHh).
+This example has been deliberately omitted. You should understand enough about QMK internals to write this without an example before hooking into such a performance sensitive area. If you need help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) or [chat with us on Discord](https://discord.gg/qmk).
 
 ### `matrix_scan_*` Function Documentation
 

docs/driver_installation_zadig.md

@@ -8,8 +8,8 @@ We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have
 
 ## Installation
 
-Put your keyboard into bootloader mode, either by hitting the `QK_BOOT` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic Lite](features/bootmagic) docs for more details). Some boards use [Command](features/command) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in.
-Some keyboards may have specific instructions for entering the bootloader. For example, the [Bootmagic Lite](features/bootmagic) key (default: Escape) might be on a different key, e.g. Left Control; or the magic combination for Command (default: Left Shift+Right Shift) might require you to hold something else, e.g. Left Control+Right Control. Refer to the board's README file if you are unsure.
+Put your keyboard into bootloader mode, either by hitting the `QK_BOOT` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic](features/bootmagic) docs for more details). Some boards use [Command](features/command) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in.
+Some keyboards may have specific instructions for entering the bootloader. For example, the [Bootmagic](features/bootmagic) key (default: Escape) might be on a different key, e.g. Left Control; or the magic combination for Command (default: Left Shift+Right Shift) might require you to hold something else, e.g. Left Control+Right Control. Refer to the board's README file if you are unsure.
 
 To put a device in bootloader mode with USBaspLoader, tap the `RESET` button while holding down the `BOOT` button.
 Alternatively, hold `BOOT` while inserting the USB cable.
@@ -98,6 +98,7 @@ The device name here is the name that appears in Zadig, and may not be what the
 |`bootloadhid` |HIDBoot                       |`16C0:05DF`   |HidUsb |
 |`usbasploader`|USBasp                        |`16C0:05DC`   |libusbK|
 |`apm32-dfu`   |APM32 DFU ISP Mode            |`314B:0106`   |WinUSB |
+|`at32-dfu`    |AT32 Bootloader DFU           |`2E3C:DF11`   |WinUSB |
 |`stm32-dfu`   |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
 |`gd32v-dfu`   |GD32V BOOTLOADER              |`28E9:0189`   |WinUSB |
 |`kiibohd`     |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |

docs/drivers/apa102.md

@@ -26,20 +26,51 @@ Add the following to your `config.h`:
 
 ## API {#api}
 
-### `void apa102_setleds(rgb_led_t *start_led, uint16_t num_leds)`
+### `void apa102_init(void)` {#api-apa102-init}
 
-Send RGB data to the APA102 LED chain.
-
-#### Arguments {#api-apa102-setleds-arguments}
-
- - `rgb_led_t *start_led`  
-   A pointer to the LED array.
- - `uint16_t num_leds`  
-   The length of the LED array.
+Initialize the LED driver. This function should be called first.
 
 ---
 
-### `void apa102_set_brightness(uint8_t brightness)`
+### `void apa102_set_color(uint16_t index, uint8_t red, uint8_t green, uint8_t blue)` {#api-apa102-set-color}
+
+Set the color of a single LED. This function does not immediately update the LEDs; call `apa102_flush()` after you are finished.
+
+#### Arguments {#api-apa102-set-color-arguments}
+
+ - `uint16_t index`  
+   The LED index in the APA102 chain.
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void apa102_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-apa102-set-color-all}
+
+Set the color of all LEDs.
+
+#### Arguments {#api-apa102-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void apa102_flush(void)` {#api-apa102-flush}
+
+Flush the PWM values to the LED chain.
+
+---
+
+### `void apa102_set_brightness(uint8_t brightness)` {#api-apa102-set-brightness}
 
 Set the global brightness.
 

docs/drivers/audio.md

@@ -57,27 +57,32 @@ This driver needs one Timer per enabled/used DAC channel, to trigger conversion;
 
 Additionally, in the board config, you'll want to make changes to enable the DACs, GPT for Timers 6, 7 and 8:
 
-```c
-//halconf.h:
-#define HAL_USE_DAC                 TRUE
-#define HAL_USE_GPT                 TRUE
+::: code-group
+```c [halconf.h]
+#pragma once
+
+#define HAL_USE_DAC TRUE // [!code focus]
+#define HAL_USE_GPT TRUE // [!code focus]
+
 #include_next <halconf.h>
 ```
+```c [mcuconf.h]
+#pragma once
 
-```c
-// mcuconf.h:
 #include_next <mcuconf.h>
-#undef STM32_DAC_USE_DAC1_CH1
-#define STM32_DAC_USE_DAC1_CH1              TRUE
-#undef STM32_DAC_USE_DAC1_CH2
-#define STM32_DAC_USE_DAC1_CH2              TRUE
-#undef STM32_GPT_USE_TIM6
-#define STM32_GPT_USE_TIM6                  TRUE
-#undef STM32_GPT_USE_TIM7
-#define STM32_GPT_USE_TIM7                  TRUE
-#undef STM32_GPT_USE_TIM8
-#define STM32_GPT_USE_TIM8                  TRUE
+
+#undef STM32_DAC_USE_DAC1_CH1 // [!code focus]
+#define STM32_DAC_USE_DAC1_CH1 TRUE // [!code focus]
+#undef STM32_DAC_USE_DAC1_CH2 // [!code focus]
+#define STM32_DAC_USE_DAC1_CH2 TRUE // [!code focus]
+#undef STM32_GPT_USE_TIM6 // [!code focus]
+#define STM32_GPT_USE_TIM6 TRUE // [!code focus]
+#undef STM32_GPT_USE_TIM7 // [!code focus]
+#define STM32_GPT_USE_TIM7 TRUE // [!code focus]
+#undef STM32_GPT_USE_TIM8 // [!code focus]
+#define STM32_GPT_USE_TIM8 TRUE // [!code focus]
 ```
+:::
 
 ::: tip
 Note: DAC1 (A4) uses TIM6, DAC2 (A5) uses TIM7, and the audio state timer uses TIM8 (configurable). 
@@ -95,23 +100,28 @@ only needs one timer (GPTD6, Tim6) to trigger the DAC unit to do a conversion; t
 
 Additionally, in the board config, you'll want to make changes to enable the DACs, GPT for Timer 6:
 
-```c
-//halconf.h:
-#define HAL_USE_DAC                 TRUE
-#define HAL_USE_GPT                 TRUE
+::: code-group
+```c [halconf.h]
+#pragma once
+
+#define HAL_USE_DAC TRUE // [!code focus]
+#define HAL_USE_GPT TRUE // [!code focus]
+
 #include_next <halconf.h>
 ```
+```c [mcuconf.h]
+#pragma once
 
-```c
-// mcuconf.h:
 #include_next <mcuconf.h>
-#undef STM32_DAC_USE_DAC1_CH1
-#define STM32_DAC_USE_DAC1_CH1              TRUE
-#undef STM32_DAC_USE_DAC1_CH2
-#define STM32_DAC_USE_DAC1_CH2              TRUE
-#undef STM32_GPT_USE_TIM6
-#define STM32_GPT_USE_TIM6                  TRUE
+
+#undef STM32_DAC_USE_DAC1_CH1 // [!code focus]
+#define STM32_DAC_USE_DAC1_CH1 TRUE // [!code focus]
+#undef STM32_DAC_USE_DAC1_CH2 // [!code focus]
+#define STM32_DAC_USE_DAC1_CH2 TRUE // [!code focus]
+#undef STM32_GPT_USE_TIM6 // [!code focus]
+#define STM32_GPT_USE_TIM6 TRUE // [!code focus]
 ```
+:::
 
 ### DAC Config
 
@@ -170,19 +180,25 @@ This driver uses the ChibiOS-PWM system to produce a square-wave on specific out
 The hardware directly toggles the pin via its alternate function. See your MCU's data-sheet for which pin can be driven by what timer - looking for TIMx_CHy and the corresponding alternate function.
 
 A configuration example for the STM32F103C8 would be:
-```c
-//halconf.h:
-#define HAL_USE_PWM                 TRUE
-#define HAL_USE_PAL                 TRUE
+
+::: code-group
+```c [halconf.h]
+#pragma once
+
+#define HAL_USE_PWM TRUE // [!code focus]
+#define HAL_USE_PAL TRUE // [!code focus]
+
 #include_next <halconf.h>
 ```
+```c [mcuconf.h]
+#pragma once
 
-```c
-// mcuconf.h:
 #include_next <mcuconf.h>
-#undef STM32_PWM_USE_TIM1
-#define STM32_PWM_USE_TIM1                  TRUE
+
+#undef STM32_PWM_USE_TIM1 // [!code focus]
+#define STM32_PWM_USE_TIM1 TRUE // [!code focus]
 ```
+:::
 
 If we now target pin A8, looking through the data-sheet of the STM32F103C8, for the timers and alternate functions
 - TIM1_CH1 = PA8 <- alternate0

docs/drivers/aw20216s.md

@@ -0,0 +1,133 @@
+# AW20216S Driver {#aw20216s-driver}
+
+SPI 18x12 LED matrix driver by Awinic. Supports a maximum of four drivers, each controlling up to 216 single-color LEDs, or 72 RGB LEDs.
+
+[AW20216S Datasheet](https://doc.awinic.com/doc/20230609wm/b6a9c70b-e1bd-495b-925f-bcbed3fc2620.pdf)
+
+## Usage {#usage}
+
+The AW20216S driver code is automatically included if you are using the [RGB Matrix](../features/rgb_matrix) feature with the `aw20216s` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led
+SRC += aw20216s.c
+SPI_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                       |Default      |Description                                                  |
+|-----------------------------|-------------|-------------------------------------------------------------|
+|`AW20216S_CS_PIN_1`          |*Not defined*|The GPIO pin connected to the first driver's Chip Select pin |
+|`AW20216S_CS_PIN_2`          |*Not defined*|The GPIO pin connected to the second driver's Chip Select pin|
+|`AW20216S_EN_PIN`            |*Not defined*|The GPIO pin connected to the drivers' Enable pins           |
+|`AW20216S_SPI_MODE`          |`0`          |The SPI mode to use                                          |
+|`AW20216S_SPI_DIVISOR`       |`4`          |The SPI divisor to use                                       |
+|`AW20216S_SCALING_MAX`       |`150`        |The scaling value                                            |
+|`AW20216S_GLOBAL_CURRENT_MAX`|`150`        |The global current control value                             |
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSx` pins, from 0 to 255. To adjust it, add the following to your `config.h`:
+
+```c
+#define AW20216S_GLOBAL_CURRENT_MAX 150
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure SPI](spi#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const aw20216s_led_t PROGMEM g_aw20216s_leds[AW20216S_LED_COUNT] = {
+/* Driver
+ *   |  R          G          B */
+    {0, SW1_CS1,   SW1_CS2,   SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the first LED index on driver 0 has its red channel on `SW1_CS1`, green on `SW1_CS2` and blue on `SW1_CS3`.
+
+These values correspond to the matrix locations as shown in the datasheet on page 16, figure 16.
+
+## API {#api}
+
+### `struct aw20216s_led_t` {#api-aw20216s-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-aw20216s-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel.
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel.
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel.
+
+---
+
+### `void aw20216s_init(pin_t cs_pin)` {#api-aw20216s-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-aw20216s-init-arguments}
+
+ - `pin_t cs_pin`  
+   The GPIO connected to the Chip Select pin of the LED driver to initialize.
+
+---
+
+### `void aw20216s_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-aw20216s-set-color}
+
+Set the color of a single LED. This function does not immediately update the LEDs; call `aw20216s_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-aw20216s-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_aw20216s_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void aw20216s_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-aw20216s-set-color-all}
+
+Set the color of all LEDs.
+
+#### Arguments {#api-aw20216s-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void aw20216s_update_pwm_buffers(pin_t cs_pin, uint8_t index)` {#api-aw20216s-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-aw20216s-update-pwm-buffers-arguments}
+
+ - `pin_t cs_pin`  
+   The GPIO connected to the Chip Select pin of the driver.
+ - `uint8_t index`  
+   The index of the driver.

docs/drivers/eeprom.md

@@ -119,13 +119,14 @@ This driver performs writes to the embedded flash storage embedded in the MCU. I
 
 Configurable options in your keyboard's `config.h`:
 
-`config.h` override                      | Default     | Description
------------------------------------------|-------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-`#define WEAR_LEVELING_EFL_FIRST_SECTOR` | _unset_            | The first sector on the MCU to use. By default this is not defined and calculated at runtime based on the MCU. However, different flash sizes on MCUs may require custom configuration.
-`#define WEAR_LEVELING_EFL_FLASH_SIZE`   | _unset_            | Allows overriding the flash size available for use for wear-leveling. Under normal circumstances this is automatically calculated and should not need to be overridden. Specifying a size larger than the amount actually available in flash will usually prevent the MCU from booting.
-`#define WEAR_LEVELING_LOGICAL_SIZE`     | `(backing_size/2)` | Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM.
-`#define WEAR_LEVELING_BACKING_SIZE`     | `2048`             | Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size.
-`#define BACKING_STORE_WRITE_SIZE`       | _automatic_        | The byte width of the underlying write used on the MCU, and is usually automatically determined from the selected MCU family. If an error occurs in the auto-detection, you'll need to consult the MCU's datasheet and determine this value, specifying it directly.
+`config.h` override                                | Default            | Description
+---------------------------------------------------|--------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+`#define WEAR_LEVELING_EFL_FIRST_SECTOR`           | _unset_            | The first sector on the MCU to use. By default this is not defined and calculated at runtime based on the MCU. However, different flash sizes on MCUs may require custom configuration.
+`#define WEAR_LEVELING_EFL_FLASH_SIZE`             | _unset_            | Allows overriding the flash size available for use for wear-leveling. Under normal circumstances this is automatically calculated and should not need to be overridden. Specifying a size larger than the amount actually available in flash will usually prevent the MCU from booting.
+`#define WEAR_LEVELING_EFL_OMIT_LAST_SECTOR_COUNT` | `0`                | Number of sectors to omit at the end of the flash. These sectors will not be allocated to the driver and the usable flash block will be offset, but keeping the set flash size. Useful on devices with bootloaders requiring a check flag at the end of flash to be present in order to confirm a valid, bootable firmware.
+`#define WEAR_LEVELING_LOGICAL_SIZE`               | `(backing_size/2)` | Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM.
+`#define WEAR_LEVELING_BACKING_SIZE`               | `2048`             | Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size.
+`#define BACKING_STORE_WRITE_SIZE`                 | _automatic_        | The byte width of the underlying write used on the MCU, and is usually automatically determined from the selected MCU family. If an error occurs in the auto-detection, you'll need to consult the MCU's datasheet and determine this value, specifying it directly.
 
 ::: warning
 If your MCU does not boot after swapping to the EFL wear-leveling driver, it's likely that the flash size is incorrectly detected, usually as an MCU with larger flash and may require overriding.

docs/drivers/gpio.md

@@ -13,7 +13,7 @@ The following macros provide basic control of GPIOs and are found in `platforms/
 |`gpio_set_pin_input_low(pin)`        |Set pin as input with builtin pull-down resistor (unavailable on AVR)|
 |`gpio_set_pin_output(pin)`           |Set pin as output (alias of `gpio_set_pin_output_push_pull`)         |
 |`gpio_set_pin_output_push_pull(pin)` |Set pin as output, push/pull mode                                    |
-|`gpio_set_pin_output_open_drain(pin)`|Set pin as output, open-drain mode (unavailable on AVR and ATSAM)    |
+|`gpio_set_pin_output_open_drain(pin)`|Set pin as output, open-drain mode (unavailable on AVR)              |
 |`gpio_write_pin_high(pin)`           |Set pin level as high, assuming it is an output                      |
 |`gpio_write_pin_low(pin)`            |Set pin level as low, assuming it is an output                       |
 |`gpio_write_pin(pin, level)`         |Set pin level, assuming it is an output                              |

docs/drivers/i2c.md

@@ -54,18 +54,25 @@ The ATmega16/32U2 does not possess I2C functionality, and so cannot use this dri
 
 You'll need to determine which pins can be used for I2C -- a an example, STM32 parts generally have multiple I2C peripherals, labeled I2C1, I2C2, I2C3 etc.
 
-To enable I2C, modify your board's `halconf.h` to enable I2C:
+To enable I2C, modify your board's `halconf.h` to enable I2C, then modify your board's `mcuconf.h` to enable the peripheral you've chosen:
 
-```c
-#define HAL_USE_I2C TRUE
+::: code-group
+```c [halconf.h]
+#pragma once
+
+#define HAL_USE_I2C TRUE // [!code focus]
+
+#include_next <halconf.h>
 ```
+```c [mcuconf.h]
+#pragma once
 
-Then, modify your board's `mcuconf.h` to enable the peripheral you've chosen, for example:
+#include_next <mcuconf.h>
 
-```c
-#undef STM32_I2C_USE_I2C2
-#define STM32_I2C_USE_I2C2 TRUE
+#undef STM32_I2C_USE_I2C2 // [!code focus]
+#define STM32_I2C_USE_I2C2 TRUE // [!code focus]
 ```
+:::
 
 |`mcuconf.h` Setting         |Description                                                                       |Default|
 |----------------------------|----------------------------------------------------------------------------------|-------|

docs/drivers/is31fl3218.md

@@ -0,0 +1,194 @@
+# IS31FL3218 Driver {#is31fl3218-driver}
+
+I²C LED driver by Lumissil. Supports up to 18 single-color LEDs, or 6 RGB LEDs.
+
+[IS31FL3218 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3218_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3218 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3218` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3218-mono.c # For single-color
+SRC += is31fl3218.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default      |Description                                        |
+|----------------------------|-------------|---------------------------------------------------|
+|`IS31FL3218_SDB_PIN`        |*Not defined*|The GPIO pin connected to the driver's shutdown pin|
+|`IS31FL3218_I2C_TIMEOUT`    |`100`        |The I²C timeout in milliseconds                    |
+|`IS31FL3218_I2C_PERSISTENCE`|`0`          |The number of times to retry I²C transmissions     |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3218's 7-bit I²C address is `0x54`, available as `IS31FL3218_I2C_ADDRESS`.
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3218_led_t PROGMEM g_is31fl3218_leds[IS31FL3218_LED_COUNT] = {
+/*   R     G     B */
+    {OUT1, OUT2, OUT3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index all have their anodes connected to `VCC`, and their cathodes on the `OUT1`, `OUT2` and `OUT3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3218_led_t PROGMEM g_is31fl3218_leds[IS31FL3218_LED_COUNT] = {
+/*   V */
+    {OUT1},
+    // etc...
+};
+```
+
+## API {#api}
+
+### `struct is31fl3218_led_t` {#api-is31fl3218-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3218-led-t-members}
+
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3218_init(void)` {#api-is31fl3218-init}
+
+Initialize the LED driver. This function should be called first.
+
+---
+
+### `void is31fl3218_write_register(uint8_t reg, uint8_t data)` {#api-is31fl3218-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3218-write-register-arguments}
+
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3218-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3218_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3218-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3218_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3218-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3218-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3218_set_value(int index, uint8_t value)` {#api-is31fl3218-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3218_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3218-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3218_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3218_set_value_all(uint8_t value)` {#api-is31fl3218-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3218-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3218_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3218-set-led-control-register-rgb}
+
+Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3218_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3218-set-led-control-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3218_leds` array).
+ - `bool red`  
+   Enable or disable the red channel.
+ - `bool green`  
+   Enable or disable the green channel.
+ - `bool blue`  
+   Enable or disable the blue channel.
+
+---
+
+### `void is31fl3218_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3218-set-led-control-register-mono}
+
+Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3218_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3218-set-led-control-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3218_leds` array).
+ - `bool value`  
+   Enable or disable the LED.
+
+---
+
+### `void is31fl3218_update_pwm_buffers(void)` {#api-is31fl3218-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+---
+
+### `void is31fl3218_update_led_control_registers(void)` {#api-is31fl3218-update-led-control-registers}
+
+Flush the LED control register values to the LED driver.

docs/drivers/is31fl3236.md

@@ -0,0 +1,228 @@
+# IS31FL3236 Driver {#is31fl3236-driver}
+
+I²C LED driver by Lumissil. Supports a maximum of four drivers, each controlling up to 36 single-color LEDs, or 12 RGB LEDs.
+
+[IS31FL3236 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3236_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3236 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3236` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3236-mono.c # For single-color
+SRC += is31fl3236.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default      |Description                                         |
+|----------------------------|-------------|----------------------------------------------------|
+|`IS31FL3236_SDB_PIN`        |*Not defined*|The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3236_I2C_TIMEOUT`    |`100`        |The I²C timeout in milliseconds                     |
+|`IS31FL3236_I2C_PERSISTENCE`|`0`          |The number of times to retry I²C transmissions      |
+|`IS31FL3236_I2C_ADDRESS_1`  |*Not defined*|The I²C address of driver 0                         |
+|`IS31FL3236_I2C_ADDRESS_2`  |*Not defined*|The I²C address of driver 1                         |
+|`IS31FL3236_I2C_ADDRESS_3`  |*Not defined*|The I²C address of driver 2                         |
+|`IS31FL3236_I2C_ADDRESS_4`  |*Not defined*|The I²C address of driver 3                         |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3236 has four possible 7-bit I²C addresses, depending on how the `AD` pin is connected.
+
+To configure this, set the `IS31FL3236_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                      |Value |
+|----------------------------|------|
+|`IS31FL3236_I2C_ADDRESS_GND`|`0x3C`|
+|`IS31FL3236_I2C_ADDRESS_SCL`|`0x3D`|
+|`IS31FL3236_I2C_ADDRESS_SDA`|`0x3E`|
+|`IS31FL3236_I2C_ADDRESS_VCC`|`0x3F`|
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3236_led_t PROGMEM g_is31fl3236_leds[IS31FL3236_LED_COUNT] = {
+/* Driver
+     |  R     G     B */
+    {0, OUT1, OUT2, OUT3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their anodes connected to `VCC`, and their cathodes on the `OUT1`, `OUT2` and `OUT3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3236_led_t PROGMEM g_is31fl3236_leds[IS31FL3236_LED_COUNT] = {
+/* Driver
+     |  V */
+    {0, OUT1},
+    // etc...
+};
+```
+
+## API {#api}
+
+### `struct is31fl3236_led_t` {#api-is31fl3236-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3236-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3236_init(uint8_t index)` {#api-is31fl3236-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3236-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3236_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3236-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3236-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3236_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3236-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3236_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3236-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3236_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3236_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3236-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3236-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3236_set_value(int index, uint8_t value)` {#api-is31fl3236-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3236_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3236-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3236_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3236_set_value_all(uint8_t value)` {#api-is31fl3236-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3236-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3236_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3236-set-led-control-register-rgb}
+
+Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3236_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3236-set-led-control-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3236_leds` array).
+ - `bool red`  
+   Enable or disable the red channel.
+ - `bool green`  
+   Enable or disable the green channel.
+ - `bool blue`  
+   Enable or disable the blue channel.
+
+---
+
+### `void is31fl3236_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3236-set-led-control-register-mono}
+
+Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3236_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3236-set-led-control-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3236_leds` array).
+ - `bool value`  
+   Enable or disable the LED.
+
+---
+
+### `void is31fl3236_update_pwm_buffers(uint8_t index)` {#api-is31fl3236-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3236-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3236_update_led_control_registers(uint8_t index)` {#api-is31fl3236-update-led-control-registers}
+
+Flush the LED control register values to the LED driver.
+
+#### Arguments {#api-is31fl3236-update-led-control-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3729.md

@@ -0,0 +1,300 @@
+# IS31FL3729 Driver {#is31fl3729-driver}
+
+I²C 16x8/15x9 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 135 single-color LEDs, or 45 RGB LEDs.
+
+[IS31FL3729 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3729_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3729 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3729` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3729-mono.c # For single-color
+SRC += is31fl3729.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default                               |Description                                         |
+|----------------------------|--------------------------------------|----------------------------------------------------|
+|`IS31FL3729_SDB_PIN`        |*Not defined*                         |The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3729_I2C_TIMEOUT`    |`100`                                 |The I²C timeout in milliseconds                     |
+|`IS31FL3729_I2C_PERSISTENCE`|`0`                                   |The number of times to retry I²C transmissions      |
+|`IS31FL3729_I2C_ADDRESS_1`  |*Not defined*                         |The I²C address of driver 0                         |
+|`IS31FL3729_I2C_ADDRESS_2`  |*Not defined*                         |The I²C address of driver 1                         |
+|`IS31FL3729_I2C_ADDRESS_3`  |*Not defined*                         |The I²C address of driver 2                         |
+|`IS31FL3729_I2C_ADDRESS_4`  |*Not defined*                         |The I²C address of driver 3                         |
+|`IS31FL3729_PWM_FREQUENCY`  |`IS31FL3729_PWM_FREQUENCY_32K_HZ`     |The PWM frequency of the LEDs                       |
+|`IS31FL3729_SW_PULLDOWN`    |`IS31FL3729_SW_PULLDOWN_2K_OHM_SW_OFF`|The `SWx` pullup resistor value                     |
+|`IS31FL3729_CS_PULLUP`      |`IS31FL3729_CS_PULLUP_2K_OHM_CS_OFF`  |The `CSx` pulldown resistor value                   |
+|`IS31FL3729_GLOBAL_CURRENT` |`0x40`                                |The global current control value                    |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3729 has four possible 7-bit I²C addresses, depending on how the `AD` pin is connected.
+
+To configure this, set the `IS31FL3729_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                      |Value |
+|----------------------------|------|
+|`IS31FL3729_I2C_ADDRESS_GND`|`0x34`|
+|`IS31FL3729_I2C_ADDRESS_SCL`|`0x35`|
+|`IS31FL3729_I2C_ADDRESS_SDA`|`0x36`|
+|`IS31FL3729_I2C_ADDRESS_VCC`|`0x37`|
+
+### PWM Frequency {#pwm-frequency}
+
+The PWM frequency can be adjusted by adding the following to your `config.h`:
+
+```c
+#define IS31FL3729_PWM_FREQUENCY IS31FL3729_PWM_FREQUENCY_32K_HZ
+```
+
+Valid values are:
+
+|Define                            |Frequency       |
+|----------------------------------|----------------|
+|`IS31FL3729_PWM_FREQUENCY_55K_HZ` |55 kHz          |
+|`IS31FL3729_PWM_FREQUENCY_32K_HZ` |32 kHz (default)|
+|`IS31FL3729_PWM_FREQUENCY_4K_HZ`  |4 kHz           |
+|`IS31FL3729_PWM_FREQUENCY_2K_HZ`  |2 kHz           |
+|`IS31FL3729_PWM_FREQUENCY_1K_HZ`  |1 kHz           |
+|`IS31FL3729_PWM_FREQUENCY_500_HZ` |500 Hz          |
+|`IS31FL3729_PWM_FREQUENCY_250_HZ` |250 Hz          |
+|`IS31FL3729_PWM_FREQUENCY_80K_HZ` |80 kHz          |
+
+### De-Ghosting {#de-ghosting}
+
+These settings control the pulldown and pullup resistor values on the `SWy` and `CSx` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 18) for more information on how and why this occurs.
+
+To adjust the resistor values, add the following to your `config.h`:
+
+```c
+#define IS31FL3729_SW_PULLDOWN IS31FL3729_SW_PULLDOWN_2K_OHM_SW_OFF
+#define IS31FL3729_CS_PULLUP IS31FL3729_CS_PULLUP_2K_OHM_CS_OFF
+```
+
+Valid values for `IS31FL3729_SW_PULLDOWN` are:
+
+|Define                                 |Resistance                    |
+|---------------------------------------|------------------------------|
+|`IS31FL3729_SW_PULLDOWN_0_OHM`         |None                          |
+|`IS31FL3729_SW_PULLDOWN_0K5_OHM_SW_OFF`|0.5 kΩ in SWy off time        |
+|`IS31FL3729_SW_PULLDOWN_1K_OHM_SW_OFF` |1 kΩ in SWy off time          |
+|`IS31FL3729_SW_PULLDOWN_2K_OHM_SW_OFF` |2 kΩ in SWy off time (default)|
+|`IS31FL3729_SW_PULLDOWN_1K_OHM`        |1 kΩ                          |
+|`IS31FL3729_SW_PULLDOWN_2K_OHM`        |2 kΩ                          |
+|`IS31FL3729_SW_PULLDOWN_4K_OHM`        |4 kΩ                          |
+|`IS31FL3729_SW_PULLDOWN_8K_OHM`        |8 kΩ                          |
+
+Valid values for `IS31FL3729_CS_PULLUP` are:
+
+|Define                               |Resistance                    |
+|-------------------------------------|------------------------------|
+|`IS31FL3729_CS_PULLUP_0_OHM`         |None                          |
+|`IS31FL3729_CS_PULLUP_0K5_OHM_CS_OFF`|0.5 kΩ in CSx off time        |
+|`IS31FL3729_CS_PULLUP_1K_OHM_CS_OFF` |1 kΩ in CSx off time          |
+|`IS31FL3729_CS_PULLUP_2K_OHM_CS_OFF` |2 kΩ in CSx off time (default)|
+|`IS31FL3729_CS_PULLUP_1K_OHM`        |1 kΩ                          |
+|`IS31FL3729_CS_PULLUP_2K_OHM`        |2 kΩ                          |
+|`IS31FL3729_CS_PULLUP_4K_OHM`        |4 kΩ                          |
+|`IS31FL3729_CS_PULLUP_8K_OHM`        |8 kΩ                          |
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSx` pins, from 0 to 255. By default, the value is 64, but if you need to adjust it, add the following to your `config.h`:
+
+```c
+#define IS31FL3729_GLOBAL_CURRENT 0x40
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3729_led_t PROGMEM g_is31fl3729_leds[IS31FL3729_LED_COUNT] = {
+/* Driver
+ *   |  R        G        B */
+    {0, SW1_CS1, SW1_CS2, SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their anodes connected to the `SW1` pin, and their cathodes on the `CS1`, `CS2` and `CS3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3729_led_t PROGMEM g_is31fl3729_leds[IS31FL3729_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, SW1_CS1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 12, figure 9.
+
+## API {#api}
+
+### `struct is31fl3729_led_t` {#api-is31fl3729-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3729-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3729_init(uint8_t index)` {#api-is31fl3729-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3729-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3729_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3729-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3729-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3729_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3729-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3729_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3729-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3729_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3729_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3729-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3729-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3729_set_value(int index, uint8_t value)` {#api-is31fl3729-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3729_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3729-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3729_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3729_set_value_all(uint8_t value)` {#api-is31fl3729-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3729-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3729_set_scaling_register(uint8_t index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3729-set-scaling-register-rgb}
+
+Configure the scaling registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3729_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3729-set-scaling-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3729_leds` array).
+ - `uint8_t red`  
+   The scaling value for the red channel.
+ - `uint8_t green`  
+   The scaling value for the green channel.
+ - `uint8_t blue`  
+   The scaling value for the blue channel.
+
+---
+
+### `void is31fl3729_set_scaling_register(uint8_t index, uint8_t value)` {#api-is31fl3729-set-scaling-register-mono}
+
+Configure the scaling registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3729_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3729-set-scaling-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3729_leds` array).
+ - `uint8_t value`  
+   The scaling value for the LED.
+
+---
+
+### `void is31fl3729_update_pwm_buffers(uint8_t index)` {#api-is31fl3729-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3729-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3729_update_scaling_registers(uint8_t index)` {#api-is31fl3729-update-scaling-registers}
+
+Flush the scaling register values to the LED driver.
+
+#### Arguments {#api-is31fl3729-update-scaling-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3731.md

@@ -0,0 +1,254 @@
+# IS31FL3731 Driver {#is31fl3731-driver}
+
+I²C Charlieplexed 16x9 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 144 single-color LEDs, or 48 RGB LEDs.
+
+[IS31FL3731 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3731_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3731 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3731` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3731-mono.c # For single-color
+SRC += is31fl3731.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default      |Description                                         |
+|----------------------------|-------------|----------------------------------------------------|
+|`IS31FL3731_SDB_PIN`        |*Not defined*|The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3731_I2C_TIMEOUT`    |`100`        |The I²C timeout in milliseconds                     |
+|`IS31FL3731_I2C_PERSISTENCE`|`0`          |The number of times to retry I²C transmissions      |
+|`IS31FL3731_I2C_ADDRESS_1`  |*Not defined*|The I²C address of driver 0                         |
+|`IS31FL3731_I2C_ADDRESS_2`  |*Not defined*|The I²C address of driver 1                         |
+|`IS31FL3731_I2C_ADDRESS_3`  |*Not defined*|The I²C address of driver 2                         |
+|`IS31FL3731_I2C_ADDRESS_4`  |*Not defined*|The I²C address of driver 3                         |
+|`IS31FL3731_DEGHOST`        |*Not defined*|Enable ghost image prevention                       |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3731 has four possible 7-bit I²C addresses, depending on how the `AD` pin is connected.
+
+To configure this, set the `IS31FL3731_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                      |Value |
+|----------------------------|------|
+|`IS31FL3731_I2C_ADDRESS_GND`|`0x74`|
+|`IS31FL3731_I2C_ADDRESS_SCL`|`0x75`|
+|`IS31FL3731_I2C_ADDRESS_SDA`|`0x76`|
+|`IS31FL3731_I2C_ADDRESS_VCC`|`0x77`|
+
+### De-Ghosting {#de-ghosting}
+
+This setting enables the de-ghosting feature on the IS31FL3731. See this [Application Note](https://www.lumissil.com/assets/pdf/core/IS31FL3731_AN.pdf) (p. 15) for more information.
+
+To enable, add the following to your `config.h`:
+
+```c
+#define IS31FL3731_DEGHOST
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = {
+/* Driver
+ *   |  R     G     B */
+    {0, C1_1, C1_2, C1_3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their cathodes connected to the `CA1` pin, and their anodes on the `CA2`, `CA3` and `CA4` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, C1_1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 11, figure 8.
+
+## API {#api}
+
+### `struct is31fl3731_led_t` {#api-is31fl3731-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3731-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3731_init(uint8_t index)` {#api-is31fl3731-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3731-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3731_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3731-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3731-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3731_select_page(uint8_t index, uint8_t page)` {#api-is31fl3731-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-is31fl3731-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void is31fl3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3731-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3731_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3731-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3731_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3731_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3731-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3731-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3731_set_value(int index, uint8_t value)` {#api-is31fl3731-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3731_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3731-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3731_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3731_set_value_all(uint8_t value)` {#api-is31fl3731-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3731-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3731_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3731-set-led-control-register-rgb}
+
+Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3731_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3731-set-led-control-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3731_leds` array).
+ - `bool red`  
+   Enable or disable the red channel.
+ - `bool green`  
+   Enable or disable the green channel.
+ - `bool blue`  
+   Enable or disable the blue channel.
+
+---
+
+### `void is31fl3731_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3731-set-led-control-register-mono}
+
+Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3731_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3731-set-led-control-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3731_leds` array).
+ - `bool value`  
+   Enable or disable the LED.
+
+---
+
+### `void is31fl3731_update_pwm_buffers(uint8_t index)` {#api-is31fl3731-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3731-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3731_update_led_control_registers(uint8_t index)` {#api-is31fl3731-update-led-control-registers}
+
+Flush the LED control register values to the LED driver.
+
+#### Arguments {#api-is31fl3731-update-led-control-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3733.md

@@ -0,0 +1,338 @@
+# IS31FL3733 Driver {#is31fl3733-driver}
+
+I²C 12x16 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 192 single-color LEDs, or 64 RGB LEDs.
+
+[IS31FL3733 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3733_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3733 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3733` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3733-mono.c # For single-color
+SRC += is31fl3733.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default                          |Description                                         |
+|----------------------------|---------------------------------|----------------------------------------------------|
+|`IS31FL3733_SDB_PIN`        |*Not defined*                    |The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3733_I2C_TIMEOUT`    |`100`                            |The I²C timeout in milliseconds                     |
+|`IS31FL3733_I2C_PERSISTENCE`|`0`                              |The number of times to retry I²C transmissions      |
+|`IS31FL3733_I2C_ADDRESS_1`  |*Not defined*                    |The I²C address of driver 0                         |
+|`IS31FL3733_I2C_ADDRESS_2`  |*Not defined*                    |The I²C address of driver 1                         |
+|`IS31FL3733_I2C_ADDRESS_3`  |*Not defined*                    |The I²C address of driver 2                         |
+|`IS31FL3733_I2C_ADDRESS_4`  |*Not defined*                    |The I²C address of driver 3                         |
+|`IS31FL3733_SYNC_1`         |`IS31FL3733_SYNC_NONE`           |The sync configuration for driver 0                 |
+|`IS31FL3733_SYNC_2`         |`IS31FL3733_SYNC_NONE`           |The sync configuration for driver 1                 |
+|`IS31FL3733_SYNC_3`         |`IS31FL3733_SYNC_NONE`           |The sync configuration for driver 2                 |
+|`IS31FL3733_SYNC_4`         |`IS31FL3733_SYNC_NONE`           |The sync configuration for driver 3                 |
+|`IS31FL3733_PWM_FREQUENCY`  |`IS31FL3733_PWM_FREQUENCY_8K4_HZ`|The PWM frequency of the LEDs (IS31FL3733B only)    |
+|`IS31FL3733_SW_PULLUP`      |`IS31FL3733_PUR_0_OHM`           |The `SWx` pullup resistor value                     |
+|`IS31FL3733_CS_PULLDOWN`    |`IS31FL3733_PDR_0_OHM`           |The `CSx` pulldown resistor value                   |
+|`IS31FL3733_GLOBAL_CURRENT` |`0xFF`                           |The global current control value                    |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3733 has 16 possible 7-bit I²C addresses, depending on how the `ADDR1` and `ADDR2` pins are connected.
+
+To configure this, set the `IS31FL3733_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                          |Value |
+|--------------------------------|------|
+|`IS31FL3733_I2C_ADDRESS_GND_GND`|`0x50`|
+|`IS31FL3733_I2C_ADDRESS_GND_SCL`|`0x51`|
+|`IS31FL3733_I2C_ADDRESS_GND_SDA`|`0x52`|
+|`IS31FL3733_I2C_ADDRESS_GND_VCC`|`0x53`|
+|`IS31FL3733_I2C_ADDRESS_SCL_GND`|`0x54`|
+|`IS31FL3733_I2C_ADDRESS_SCL_SCL`|`0x55`|
+|`IS31FL3733_I2C_ADDRESS_SCL_SDA`|`0x56`|
+|`IS31FL3733_I2C_ADDRESS_SCL_VCC`|`0x57`|
+|`IS31FL3733_I2C_ADDRESS_SDA_GND`|`0x58`|
+|`IS31FL3733_I2C_ADDRESS_SDA_SCL`|`0x59`|
+|`IS31FL3733_I2C_ADDRESS_SDA_SDA`|`0x5A`|
+|`IS31FL3733_I2C_ADDRESS_SDA_VCC`|`0x5B`|
+|`IS31FL3733_I2C_ADDRESS_VCC_GND`|`0x5C`|
+|`IS31FL3733_I2C_ADDRESS_VCC_SCL`|`0x5D`|
+|`IS31FL3733_I2C_ADDRESS_VCC_SDA`|`0x5E`|
+|`IS31FL3733_I2C_ADDRESS_VCC_VCC`|`0x5F`|
+
+### Multi-Driver Synchronization {#multi-driver-synchronization}
+
+Multiple IS31FL3733 drivers can be synchronized by connecting the `SYNC` pins together. One driver must be designated as the "master", and the others configured as "slave".
+
+To do this, set the `IS31FL3733_SYNC_n` defines accordingly in your `config.h`, where *n* denotes the driver index:
+
+|Define                  |Value                      |
+|------------------------|---------------------------|
+|`IS31FL3733_SYNC_NONE`  |No synchronization         |
+|`IS31FL3733_SYNC_MASTER`|Driver configured as master|
+|`IS31FL3733_SYNC_SLAVE` |Driver configured as slave |
+
+### PWM Frequency {#pwm-frequency}
+
+The PWM frequency can be adjusted (for IS31FL3733B only) by adding the following to your `config.h`:
+
+```c
+#define IS31FL3733_PWM_FREQUENCY IS31FL3733_PWM_FREQUENCY_8K4_HZ
+```
+
+Valid values are:
+
+|Define                            |Frequency        |
+|----------------------------------|-----------------|
+|`IS31FL3733_PWM_FREQUENCY_8K4_HZ` |8.4 kHz (default)|
+|`IS31FL3733_PWM_FREQUENCY_4K2_HZ` |4.2 kHz          |
+|`IS31FL3733_PWM_FREQUENCY_26K7_HZ`|26.7 kHz         |
+|`IS31FL3733_PWM_FREQUENCY_2K1_HZ` |2.1 kHz          |
+|`IS31FL3733_PWM_FREQUENCY_1K05_HZ`|1.05 kHz         |
+
+### De-Ghosting {#de-ghosting}
+
+These settings control the pullup and pulldown resistor values on the `SWy` and `CSx` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 23) for more information on how and why this occurs.
+
+To adjust the resistor values, add the following to your `config.h`:
+
+```c
+#define IS31FL3733_SW_PULLUP IS31FL3733_PUR_0_OHM
+#define IS31FL3733_CS_PULLDOWN IS31FL3733_PUR_0_OHM
+```
+
+Valid values for `IS31FL3733_SW_PULLUP` are:
+
+|Define                  |Resistance    |
+|------------------------|--------------|
+|`IS31FL3733_PUR_0_OHM`  |None (default)|
+|`IS31FL3733_PUR_0K5_OHM`|0.5 kΩ        |
+|`IS31FL3733_PUR_1K_OHM` |1 kΩ          |
+|`IS31FL3733_PUR_2K_OHM` |2 kΩ          |
+|`IS31FL3733_PUR_4K_OHM` |4 kΩ          |
+|`IS31FL3733_PUR_8K_OHM` |8 kΩ          |
+|`IS31FL3733_PUR_16K_OHM`|16 kΩ         |
+|`IS31FL3733_PUR_32K_OHM`|32 kΩ         |
+
+Valid values for `IS31FL3733_CS_PULLDOWN` are:
+
+|Define                  |Resistance    |
+|------------------------|--------------|
+|`IS31FL3733_PDR_0_OHM`  |None (default)|
+|`IS31FL3733_PDR_0K5_OHM`|0.5 kΩ        |
+|`IS31FL3733_PDR_1K_OHM` |1 kΩ          |
+|`IS31FL3733_PDR_2K_OHM` |2 kΩ          |
+|`IS31FL3733_PDR_4K_OHM` |4 kΩ          |
+|`IS31FL3733_PDR_8K_OHM` |8 kΩ          |
+|`IS31FL3733_PDR_16K_OHM`|16 kΩ         |
+|`IS31FL3733_PDR_32K_OHM`|32 kΩ         |
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSx` pins, from 0 to 255. By default, the value is the maximum (255), but if you need to lower it, add the following to your `config.h`:
+
+```c
+#define IS31FL3733_GLOBAL_CURRENT 0xFF
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT] = {
+/* Driver
+ *   |  R         G         B */
+    {0, SW1_CS1,  SW1_CS2,  SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their cathodes connected to the `SW1` pin, and their anodes on the `CS1`, `CS2` and `CS3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, SW1_CS1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 15, figure 9.
+
+## API {#api}
+
+### `struct is31fl3733_led_t` {#api-is31fl3733-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3733-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3733_init(uint8_t index)` {#api-is31fl3733-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3733-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3733_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3733-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3733-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3733_select_page(uint8_t index, uint8_t page)` {#api-is31fl3733-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-is31fl3733-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void is31fl3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3733-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3733_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3733-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3733_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3733-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3733-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3733_set_value(int index, uint8_t value)` {#api-is31fl3733-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3733_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3733-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3733_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3733_set_value_all(uint8_t value)` {#api-is31fl3733-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3733-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3733-set-led-control-register-rgb}
+
+Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3733_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3733-set-led-control-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3733_leds` array).
+ - `bool red`  
+   Enable or disable the red channel.
+ - `bool green`  
+   Enable or disable the green channel.
+ - `bool blue`  
+   Enable or disable the blue channel.
+
+---
+
+### `void is31fl3733_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3733-set-led-control-register-mono}
+
+Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3733_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3733-set-led-control-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3733_leds` array).
+ - `bool value`  
+   Enable or disable the LED.
+
+---
+
+### `void is31fl3733_update_pwm_buffers(uint8_t index)` {#api-is31fl3733-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3733-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3733_update_led_control_registers(uint8_t index)` {#api-is31fl3733-update-led-control-registers}
+
+Flush the LED control register values to the LED driver.
+
+#### Arguments {#api-is31fl3733-update-led-control-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3736.md

@@ -0,0 +1,322 @@
+# IS31FL3736 Driver {#is31fl3736-driver}
+
+I²C 12x8 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 96 single-color LEDs, or 32 RGB LEDs.
+
+[IS31FL3736 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3736_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3736 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3736` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3736-mono.c # For single-color
+SRC += is31fl3736.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default                          |Description                                         |
+|----------------------------|---------------------------------|----------------------------------------------------|
+|`IS31FL3736_SDB_PIN`        |*Not defined*                    |The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3736_I2C_TIMEOUT`    |`100`                            |The I²C timeout in milliseconds                     |
+|`IS31FL3736_I2C_PERSISTENCE`|`0`                              |The number of times to retry I²C transmissions      |
+|`IS31FL3736_I2C_ADDRESS_1`  |*Not defined*                    |The I²C address of driver 0                         |
+|`IS31FL3736_I2C_ADDRESS_2`  |*Not defined*                    |The I²C address of driver 1                         |
+|`IS31FL3736_I2C_ADDRESS_3`  |*Not defined*                    |The I²C address of driver 2                         |
+|`IS31FL3736_I2C_ADDRESS_4`  |*Not defined*                    |The I²C address of driver 3                         |
+|`IS31FL3736_PWM_FREQUENCY`  |`IS31FL3736_PWM_FREQUENCY_8K4_HZ`|The PWM frequency of the LEDs (IS31FL3736B only)    |
+|`IS31FL3736_SW_PULLUP`      |`IS31FL3736_PUR_0_OHM`           |The `SWx` pullup resistor value                     |
+|`IS31FL3736_CS_PULLDOWN`    |`IS31FL3736_PDR_0_OHM`           |The `CSx` pulldown resistor value                   |
+|`IS31FL3736_GLOBAL_CURRENT` |`0xFF`                           |The global current control value                    |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3736 has 16 possible 7-bit I²C addresses, depending on how the `ADDR1` and `ADDR2` pins are connected.
+
+To configure this, set the `IS31FL3736_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                          |Value |
+|--------------------------------|------|
+|`IS31FL3736_I2C_ADDRESS_GND_GND`|`0x50`|
+|`IS31FL3736_I2C_ADDRESS_GND_SCL`|`0x51`|
+|`IS31FL3736_I2C_ADDRESS_GND_SDA`|`0x52`|
+|`IS31FL3736_I2C_ADDRESS_GND_VCC`|`0x53`|
+|`IS31FL3736_I2C_ADDRESS_SCL_GND`|`0x54`|
+|`IS31FL3736_I2C_ADDRESS_SCL_SCL`|`0x55`|
+|`IS31FL3736_I2C_ADDRESS_SCL_SDA`|`0x56`|
+|`IS31FL3736_I2C_ADDRESS_SCL_VCC`|`0x57`|
+|`IS31FL3736_I2C_ADDRESS_SDA_GND`|`0x58`|
+|`IS31FL3736_I2C_ADDRESS_SDA_SCL`|`0x59`|
+|`IS31FL3736_I2C_ADDRESS_SDA_SDA`|`0x5A`|
+|`IS31FL3736_I2C_ADDRESS_SDA_VCC`|`0x5B`|
+|`IS31FL3736_I2C_ADDRESS_VCC_GND`|`0x5C`|
+|`IS31FL3736_I2C_ADDRESS_VCC_SCL`|`0x5D`|
+|`IS31FL3736_I2C_ADDRESS_VCC_SDA`|`0x5E`|
+|`IS31FL3736_I2C_ADDRESS_VCC_VCC`|`0x5F`|
+
+### PWM Frequency {#pwm-frequency}
+
+The PWM frequency can be adjusted (for IS31FL3736B only) by adding the following to your `config.h`:
+
+```c
+#define IS31FL3736_PWM_FREQUENCY IS31FL3736_PWM_FREQUENCY_8K4_HZ
+```
+
+Valid values are:
+
+|Define                            |Frequency        |
+|----------------------------------|-----------------|
+|`IS31FL3736_PWM_FREQUENCY_8K4_HZ` |8.4 kHz (default)|
+|`IS31FL3736_PWM_FREQUENCY_4K2_HZ` |4.2 kHz          |
+|`IS31FL3736_PWM_FREQUENCY_26K7_HZ`|26.7 kHz         |
+|`IS31FL3736_PWM_FREQUENCY_2K1_HZ` |2.1 kHz          |
+|`IS31FL3736_PWM_FREQUENCY_1K05_HZ`|1.05 kHz         |
+
+### De-Ghosting {#de-ghosting}
+
+These settings control the pullup and pulldown resistor values on the `SWy` and `CSx` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 25) for more information on how and why this occurs.
+
+To adjust the resistor values, add the following to your `config.h`:
+
+```c
+#define IS31FL3736_SW_PULLUP IS31FL3736_PUR_0_OHM
+#define IS31FL3736_CS_PULLDOWN IS31FL3736_PDR_0_OHM
+```
+
+Valid values for `IS31FL3736_SW_PULLUP` are:
+
+|Define                  |Resistance    |
+|------------------------|--------------|
+|`IS31FL3736_PUR_0_OHM`  |None (default)|
+|`IS31FL3736_PUR_0K5_OHM`|0.5 kΩ        |
+|`IS31FL3736_PUR_1K_OHM` |1 kΩ          |
+|`IS31FL3736_PUR_2K_OHM` |2 kΩ          |
+|`IS31FL3736_PUR_4K_OHM` |4 kΩ          |
+|`IS31FL3736_PUR_8K_OHM` |8 kΩ          |
+|`IS31FL3736_PUR_16K_OHM`|16 kΩ         |
+|`IS31FL3736_PUR_32K_OHM`|32 kΩ         |
+
+Valid values for `IS31FL3736_CS_PULLDOWN` are:
+
+|Define                  |Resistance    |
+|------------------------|--------------|
+|`IS31FL3736_PDR_0_OHM`  |None (default)|
+|`IS31FL3736_PDR_0K5_OHM`|0.5 kΩ        |
+|`IS31FL3736_PDR_1K_OHM` |1 kΩ          |
+|`IS31FL3736_PDR_2K_OHM` |2 kΩ          |
+|`IS31FL3736_PDR_4K_OHM` |4 kΩ          |
+|`IS31FL3736_PDR_8K_OHM` |8 kΩ          |
+|`IS31FL3736_PDR_16K_OHM`|16 kΩ         |
+|`IS31FL3736_PDR_32K_OHM`|32 kΩ         |
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSx` pins, from 0 to 255. By default, the value is the maximum (255), but if you need to lower it, add the following to your `config.h`:
+
+```c
+#define IS31FL3736_GLOBAL_CURRENT 0xFF
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3736_led_t PROGMEM g_is31fl3736_leds[IS31FL3736_LED_COUNT] = {
+/* Driver
+ *   |  R         G         B */
+    {0, SW1_CS1,  SW1_CS2,  SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their cathodes connected to the `SW1` pin, and their anodes on the `CS1`, `CS2` and `CS3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3736_led_t PROGMEM g_is31fl3736_leds[IS31FL3736_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, SW1_CS1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 16, figure 9.
+
+## API {#api}
+
+### `struct is31fl3736_led_t` {#api-is31fl3736-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3736-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3736_init(uint8_t index)` {#api-is31fl3736-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3736-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3736_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3736-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3736-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3736_select_page(uint8_t index, uint8_t page)` {#api-is31fl3736-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-is31fl3736-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void is31fl3736_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3736-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3736_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3736-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3736_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3736_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3736-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3736-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3736_set_value(int index, uint8_t value)` {#api-is31fl3736-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3736_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3736-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3736_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3736_set_value_all(uint8_t value)` {#api-is31fl3736-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3736-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3736_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3736-set-led-control-register-rgb}
+
+Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3736_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3736-set-led-control-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3736_leds` array).
+ - `bool red`  
+   Enable or disable the red channel.
+ - `bool green`  
+   Enable or disable the green channel.
+ - `bool blue`  
+   Enable or disable the blue channel.
+
+---
+
+### `void is31fl3736_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3736-set-led-control-register-mono}
+
+Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3736_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3736-set-led-control-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3736_leds` array).
+ - `bool value`  
+   Enable or disable the LED.
+
+---
+
+### `void is31fl3736_update_pwm_buffers(uint8_t index)` {#api-is31fl3736-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3736-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3736_update_led_control_registers(uint8_t index)` {#api-is31fl3736-update-led-control-registers}
+
+Flush the LED control register values to the LED driver.
+
+#### Arguments {#api-is31fl3736-update-led-control-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3737.md

@@ -0,0 +1,310 @@
+# IS31FL3737 Driver {#is31fl3737-driver}
+
+I²C 12x12 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 144 single-color LEDs, or 48 RGB LEDs.
+
+[IS31FL3737 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3737_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3737 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3737` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3737-mono.c # For single-color
+SRC += is31fl3737.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default                          |Description                                         |
+|----------------------------|---------------------------------|----------------------------------------------------|
+|`IS31FL3737_SDB_PIN`        |*Not defined*                    |The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3737_I2C_TIMEOUT`    |`100`                            |The I²C timeout in milliseconds                     |
+|`IS31FL3737_I2C_PERSISTENCE`|`0`                              |The number of times to retry I²C transmissions      |
+|`IS31FL3737_I2C_ADDRESS_1`  |*Not defined*                    |The I²C address of driver 0                         |
+|`IS31FL3737_I2C_ADDRESS_2`  |*Not defined*                    |The I²C address of driver 1                         |
+|`IS31FL3737_I2C_ADDRESS_3`  |*Not defined*                    |The I²C address of driver 2                         |
+|`IS31FL3737_I2C_ADDRESS_4`  |*Not defined*                    |The I²C address of driver 3                         |
+|`IS31FL3737_PWM_FREQUENCY`  |`IS31FL3737_PWM_FREQUENCY_8K4_HZ`|The PWM frequency of the LEDs (IS31FL3737B only)    |
+|`IS31FL3737_SW_PULLUP`      |`IS31FL3737_PUR_0_OHM`           |The `SWx` pullup resistor value                     |
+|`IS31FL3737_CS_PULLDOWN`    |`IS31FL3737_PDR_0_OHM`           |The `CSx` pulldown resistor value                   |
+|`IS31FL3737_GLOBAL_CURRENT` |`0xFF`                           |The global current control value                    |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3737 has four possible 7-bit I²C addresses, depending on how the `ADDR` pin is connected.
+
+To configure this, set the `IS31FL3737_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                      |Value |
+|----------------------------|------|
+|`IS31FL3737_I2C_ADDRESS_GND`|`0x50`|
+|`IS31FL3737_I2C_ADDRESS_SCL`|`0x55`|
+|`IS31FL3737_I2C_ADDRESS_SDA`|`0x5A`|
+|`IS31FL3737_I2C_ADDRESS_VCC`|`0x5F`|
+
+### PWM Frequency {#pwm-frequency}
+
+The PWM frequency can be adjusted (for IS31FL3737B only) by adding the following to your `config.h`:
+
+```c
+#define IS31FL3737_PWM_FREQUENCY IS31FL3737_PWM_FREQUENCY_8K4_HZ
+```
+
+Valid values are:
+
+|Define                            |Frequency        |
+|----------------------------------|-----------------|
+|`IS31FL3737_PWM_FREQUENCY_8K4_HZ` |8.4 kHz (default)|
+|`IS31FL3737_PWM_FREQUENCY_4K2_HZ` |4.2 kHz          |
+|`IS31FL3737_PWM_FREQUENCY_26K7_HZ`|26.7 kHz         |
+|`IS31FL3737_PWM_FREQUENCY_2K1_HZ` |2.1 kHz          |
+|`IS31FL3737_PWM_FREQUENCY_1K05_HZ`|1.05 kHz         |
+
+### De-Ghosting {#de-ghosting}
+
+These settings control the pullup and pulldown resistor values on the `SWy` and `CSx` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 23) for more information on how and why this occurs.
+
+To adjust the resistor values, add the following to your `config.h`:
+
+```c
+#define IS31FL3737_SW_PULLUP IS31FL3737_PUR_0_OHM
+#define IS31FL3737_CS_PULLDOWN IS31FL3737_PDR_0_OHM
+```
+
+Valid values for `IS31FL3737_SW_PULLUP` are:
+
+|Define                  |Resistance    |
+|------------------------|--------------|
+|`IS31FL3737_PUR_0_OHM`  |None (default)|
+|`IS31FL3737_PUR_0K5_OHM`|0.5 kΩ        |
+|`IS31FL3737_PUR_1K_OHM` |1 kΩ          |
+|`IS31FL3737_PUR_2K_OHM` |2 kΩ          |
+|`IS31FL3737_PUR_4K_OHM` |4 kΩ          |
+|`IS31FL3737_PUR_8K_OHM` |8 kΩ          |
+|`IS31FL3737_PUR_16K_OHM`|16 kΩ         |
+|`IS31FL3737_PUR_32K_OHM`|32 kΩ         |
+
+Valid values for `IS31FL3737_CS_PULLDOWN` are:
+
+|Define                  |Resistance    |
+|------------------------|--------------|
+|`IS31FL3737_PDR_0_OHM`  |None (default)|
+|`IS31FL3737_PDR_0K5_OHM`|0.5 kΩ        |
+|`IS31FL3737_PDR_1K_OHM` |1 kΩ          |
+|`IS31FL3737_PDR_2K_OHM` |2 kΩ          |
+|`IS31FL3737_PDR_4K_OHM` |4 kΩ          |
+|`IS31FL3737_PDR_8K_OHM` |8 kΩ          |
+|`IS31FL3737_PDR_16K_OHM`|16 kΩ         |
+|`IS31FL3737_PDR_32K_OHM`|32 kΩ         |
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSx` pins, from 0 to 255. By default, the value is the maximum (255), but if you need to lower it, add the following to your `config.h`:
+
+```c
+#define IS31FL3737_GLOBAL_CURRENT 0xFF
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3737_led_t PROGMEM g_is31fl3737_leds[IS31FL3737_LED_COUNT] = {
+/* Driver
+ *   |  R         G         B */
+    {0, SW1_CS1,  SW1_CS2,  SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their cathodes connected to the `SW1` pin, and their anodes on the `CS1`, `CS2` and `CS3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3737_led_t PROGMEM g_is31fl3737_leds[IS31FL3737_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, SW1_CS1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 15, figure 9.
+
+## API {#api}
+
+### `struct is31fl3737_led_t` {#api-is31fl3737-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3737-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3737_init(uint8_t index)` {#api-is31fl3737-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3737-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3737_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3737-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3737-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3737_select_page(uint8_t index, uint8_t page)` {#api-is31fl3737-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-is31fl3737-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void is31fl3737_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3737-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3737_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3737-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3737_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3737_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3737-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3737-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3737_set_value(int index, uint8_t value)` {#api-is31fl3737-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3737_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3737-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3737_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3737_set_value_all(uint8_t value)` {#api-is31fl3737-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3737-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3737_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3737-set-led-control-register-rgb}
+
+Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3737_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3737-set-led-control-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3737_leds` array).
+ - `bool red`  
+   Enable or disable the red channel.
+ - `bool green`  
+   Enable or disable the green channel.
+ - `bool blue`  
+   Enable or disable the blue channel.
+
+---
+
+### `void is31fl3737_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3737-set-led-control-register-mono}
+
+Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3737_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3737-set-led-control-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3737_leds` array).
+ - `bool value`  
+   Enable or disable the LED.
+
+---
+
+### `void is31fl3737_update_pwm_buffers(uint8_t index)` {#api-is31fl3737-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3737-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3737_update_led_control_registers(uint8_t index)` {#api-is31fl3737-update-led-control-registers}
+
+Flush the LED control register values to the LED driver.
+
+#### Arguments {#api-is31fl3737-update-led-control-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3741.md

@@ -0,0 +1,310 @@
+# IS31FL3741 Driver {#is31fl3741-driver}
+
+I²C 39x9 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 351 single-color LEDs, or 117 RGB LEDs.
+
+[IS31FL3741A Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3741A_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3741 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3741` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3741-mono.c # For single-color
+SRC += is31fl3741.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default                          |Description                                         |
+|----------------------------|---------------------------------|----------------------------------------------------|
+|`IS31FL3741_SDB_PIN`        |*Not defined*                    |The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3741_I2C_TIMEOUT`    |`100`                            |The I²C timeout in milliseconds                     |
+|`IS31FL3741_I2C_PERSISTENCE`|`0`                              |The number of times to retry I²C transmissions      |
+|`IS31FL3741_I2C_ADDRESS_1`  |*Not defined*                    |The I²C address of driver 0                         |
+|`IS31FL3741_I2C_ADDRESS_2`  |*Not defined*                    |The I²C address of driver 1                         |
+|`IS31FL3741_I2C_ADDRESS_3`  |*Not defined*                    |The I²C address of driver 2                         |
+|`IS31FL3741_I2C_ADDRESS_4`  |*Not defined*                    |The I²C address of driver 3                         |
+|`IS31FL3741_CONFIGURATION`  |`1`                              |The value of the configuration register             |
+|`IS31FL3741_PWM_FREQUENCY`  |`IS31FL3741_PWM_FREQUENCY_29K_HZ`|The PWM frequency of the LEDs (IS31FL3741A only)    |
+|`IS31FL3741_SW_PULLUP`      |`IS31FL3741_PUR_32K_OHM`         |The `SWx` pullup resistor value                     |
+|`IS31FL3741_CS_PULLDOWN`    |`IS31FL3741_PDR_32K_OHM`         |The `CSx` pulldown resistor value                   |
+|`IS31FL3741_GLOBAL_CURRENT` |`0xFF`                           |The global current control value                    |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3741 has four possible 7-bit I²C addresses, depending on how the `ADDR` pin is connected.
+
+To configure this, set the `IS31FL3741_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                      |Value |
+|----------------------------|------|
+|`IS31FL3741_I2C_ADDRESS_GND`|`0x30`|
+|`IS31FL3741_I2C_ADDRESS_SCL`|`0x31`|
+|`IS31FL3741_I2C_ADDRESS_SDA`|`0x32`|
+|`IS31FL3741_I2C_ADDRESS_VCC`|`0x33`|
+
+### PWM Frequency {#pwm-frequency}
+
+The PWM frequency can be adjusted (for IS31FL3741A only) by adding the following to your `config.h`:
+
+```c
+#define IS31FL3741_PWM_FREQUENCY IS31FL3741_PWM_FREQUENCY_29K_HZ
+```
+
+Valid values are:
+
+|Define                           |Frequency       |
+|---------------------------------|----------------|
+|`IS31FL3741_PWM_FREQUENCY_29K_HZ`|29 kHz (default)|
+|`IS31FL3741_PWM_FREQUENCY_3K6_HZ`|3.6 kHz         |
+|`IS31FL3741_PWM_FREQUENCY_1K8_HZ`|1.8 kHz         |
+|`IS31FL3741_PWM_FREQUENCY_900_HZ`|900 Hz          |
+
+### De-Ghosting {#de-ghosting}
+
+These settings control the pullup and pulldown resistor values on the `CSx` and `SWy` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 18) for more information on how and why this occurs.
+
+To adjust the resistor values, add the following to your `config.h`:
+
+```c
+#define IS31FL3741_SW_PULLUP IS31FL3741_PUR_32K_OHM
+#define IS31FL3741_CS_PULLDOWN IS31FL3741_PDR_32K_OHM
+```
+
+Valid values for `IS31FL3741_SW_PULLUP` are:
+
+|Define                  |Resistance     |
+|------------------------|---------------|
+|`IS31FL3741_PUR_0_OHM`  |None           |
+|`IS31FL3741_PUR_0K5_OHM`|0.5 kΩ         |
+|`IS31FL3741_PUR_1K_OHM` |1 kΩ           |
+|`IS31FL3741_PUR_2K_OHM` |2 kΩ           |
+|`IS31FL3741_PUR_4K_OHM` |4 kΩ           |
+|`IS31FL3741_PUR_8K_OHM` |8 kΩ           |
+|`IS31FL3741_PUR_16K_OHM`|16 kΩ          |
+|`IS31FL3741_PUR_32K_OHM`|32 kΩ (default)|
+
+Valid values for `IS31FL3741_CS_PULLDOWN` are:
+
+|Define                  |Resistance     |
+|------------------------|---------------|
+|`IS31FL3741_PDR_0_OHM`  |None           |
+|`IS31FL3741_PDR_0K5_OHM`|0.5 kΩ         |
+|`IS31FL3741_PDR_1K_OHM` |1 kΩ           |
+|`IS31FL3741_PDR_2K_OHM` |2 kΩ           |
+|`IS31FL3741_PDR_4K_OHM` |4 kΩ           |
+|`IS31FL3741_PDR_8K_OHM` |8 kΩ           |
+|`IS31FL3741_PDR_16K_OHM`|16 kΩ          |
+|`IS31FL3741_PDR_32K_OHM`|32 kΩ (default)|
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSx` pins, from 0 to 255. By default, the value is the maximum (255), but if you need to lower it, add the following to your `config.h`:
+
+```c
+#define IS31FL3741_GLOBAL_CURRENT 0xFF
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3741_led_t PROGMEM g_is31fl3741_leds[IS31FL3741_LED_COUNT] = {
+/* Driver
+ *   |  R         G         B */
+    {0, SW1_CS1,  SW1_CS2,  SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their anodes connected to the `SW1` pin, and their cathodes on the `CS1`, `CS2` and `CS3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3741_led_t PROGMEM g_is31fl3741_leds[IS31FL3741_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, SW1_CS1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 12, figure 8.
+
+## API {#api}
+
+### `struct is31fl3741_led_t` {#api-is31fl3741-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3741-led-t-members}
+
+ - `uint32_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint32_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint32_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint32_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint32_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3741_init(uint8_t index)` {#api-is31fl3741-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3741-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3741_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3741-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3741-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3741_select_page(uint8_t index, uint8_t page)` {#api-is31fl3741-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-is31fl3741-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void is31fl3741_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3741-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3741_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3741-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3741_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3741_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3741-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3741-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3741_set_value(int index, uint8_t value)` {#api-is31fl3741-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3741_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3741-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3741_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3741_set_value_all(uint8_t value)` {#api-is31fl3741-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3741-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3741_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3741-set-led-control-register-rgb}
+
+Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3741_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3741-set-led-control-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3741_leds` array).
+ - `bool red`  
+   Enable or disable the red channel.
+ - `bool green`  
+   Enable or disable the green channel.
+ - `bool blue`  
+   Enable or disable the blue channel.
+
+---
+
+### `void is31fl3741_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3741-set-led-control-register-mono}
+
+Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3741_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3741-set-led-control-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3741_leds` array).
+ - `bool value`  
+   Enable or disable the LED.
+
+---
+
+### `void is31fl3741_update_pwm_buffers(uint8_t index)` {#api-is31fl3741-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3741-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3741_update_led_control_registers(uint8_t index)` {#api-is31fl3741-update-led-control-registers}
+
+Flush the LED control register values to the LED driver.
+
+#### Arguments {#api-is31fl3741-update-led-control-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3742a.md

@@ -0,0 +1,310 @@
+# IS31FL3742A Driver {#is31fl3742a-driver}
+
+I²C 30x6 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 180 single-color LEDs, or 60 RGB LEDs.
+
+[IS31FL3742A Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3742A_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3742A driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3742a` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3742a-mono.c # For single-color
+SRC += is31fl3742a.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                       |Default                           |Description                                         |
+|-----------------------------|----------------------------------|----------------------------------------------------|
+|`IS31FL3742A_SDB_PIN`        |*Not defined*                     |The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3742A_I2C_TIMEOUT`    |`100`                             |The I²C timeout in milliseconds                     |
+|`IS31FL3742A_I2C_PERSISTENCE`|`0`                               |The number of times to retry I²C transmissions      |
+|`IS31FL3742A_I2C_ADDRESS_1`  |*Not defined*                     |The I²C address of driver 0                         |
+|`IS31FL3742A_I2C_ADDRESS_2`  |*Not defined*                     |The I²C address of driver 1                         |
+|`IS31FL3742A_I2C_ADDRESS_3`  |*Not defined*                     |The I²C address of driver 2                         |
+|`IS31FL3742A_I2C_ADDRESS_4`  |*Not defined*                     |The I²C address of driver 3                         |
+|`IS31FL3742A_CONFIGURATION`  |`0x31`                            |The value of the configuration register             |
+|`IS31FL3742A_PWM_FREQUENCY`  |`IS31FL3742A_PWM_FREQUENCY_29K_HZ`|The PWM frequency of the LEDs                       |
+|`IS31FL3742A_SW_PULLDOWN`    |`IS31FL3742A_PDR_8K_OHM`          |The `SWx` pulldown resistor value                   |
+|`IS31FL3742A_CS_PULLUP`      |`IS31FL3742A_PUR_8K_OHM`          |The `CSx` pullup resistor value                     |
+|`IS31FL3742A_GLOBAL_CURRENT` |`0xFF`                            |The global current control value                    |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3742A has four possible 7-bit I²C addresses, depending on how the `ADDR` pin is connected.
+
+To configure this, set the `IS31FL3742A_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                       |Value |
+|-----------------------------|------|
+|`IS31FL3742A_I2C_ADDRESS_GND`|`0x30`|
+|`IS31FL3742A_I2C_ADDRESS_SCL`|`0x31`|
+|`IS31FL3742A_I2C_ADDRESS_SDA`|`0x32`|
+|`IS31FL3742A_I2C_ADDRESS_VCC`|`0x33`|
+
+### PWM Frequency {#pwm-frequency}
+
+The PWM frequency can be adjusted by adding the following to your `config.h`:
+
+```c
+#define IS31FL3742A_PWM_FREQUENCY IS31FL3742A_PWM_FREQUENCY_29K_HZ
+```
+
+Valid values are:
+
+|Define                            |Frequency       |
+|----------------------------------|----------------|
+|`IS31FL3742A_PWM_FREQUENCY_29K_HZ`|29 kHz (default)|
+|`IS31FL3742A_PWM_FREQUENCY_3K6_HZ`|3.6 kHz         |
+|`IS31FL3742A_PWM_FREQUENCY_1K8_HZ`|1.8 kHz         |
+|`IS31FL3742A_PWM_FREQUENCY_900_HZ`|900 Hz          |
+
+### De-Ghosting {#de-ghosting}
+
+These settings control the pulldown and pullup resistor values on the `SWy` and `CSx` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 23) for more information on how and why this occurs.
+
+To adjust the resistor values, add the following to your `config.h`:
+
+```c
+#define IS31FL3742A_SW_PULLDOWN IS31FL3742A_PDR_8K_OHM
+#define IS31FL3742A_CS_PULLUP IS31FL3742A_PUR_8K_OHM
+```
+
+Valid values for `IS31FL3742A_SW_PULLDOWN` are:
+
+|Define                   |Resistance    |
+|-------------------------|--------------|
+|`IS31FL3742A_PDR_0_OHM`  |None          |
+|`IS31FL3742A_PDR_0K5_OHM`|0.5 kΩ        |
+|`IS31FL3742A_PDR_1K_OHM` |1 kΩ          |
+|`IS31FL3742A_PDR_2K_OHM` |2 kΩ          |
+|`IS31FL3742A_PDR_4K_OHM` |4 kΩ          |
+|`IS31FL3742A_PDR_8K_OHM` |8 kΩ (default)|
+|`IS31FL3742A_PDR_16K_OHM`|16 kΩ         |
+|`IS31FL3742A_PDR_32K_OHM`|32 kΩ         |
+
+Valid values for `IS31FL3742A_CS_PULLUP` are:
+
+|Define                   |Resistance    |
+|-------------------------|--------------|
+|`IS31FL3742A_PUR_0_OHM`  |None          |
+|`IS31FL3742A_PUR_0K5_OHM`|0.5 kΩ        |
+|`IS31FL3742A_PUR_1K_OHM` |1 kΩ          |
+|`IS31FL3742A_PUR_2K_OHM` |2 kΩ          |
+|`IS31FL3742A_PUR_4K_OHM` |4 kΩ          |
+|`IS31FL3742A_PUR_8K_OHM` |8 kΩ (default)|
+|`IS31FL3742A_PUR_16K_OHM`|16 kΩ         |
+|`IS31FL3742A_PUR_32K_OHM`|32 kΩ         |
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSx` pins, from 0 to 255. By default, the value is the maximum (255), but if you need to lower it, add the following to your `config.h`:
+
+```c
+#define IS31FL3742A_GLOBAL_CURRENT 0xFF
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3742a_led_t PROGMEM g_is31fl3742a_leds[IS31FL3742A_LED_COUNT] = {
+/* Driver
+ *   |  R         G         B */
+    {0, SW1_CS1,  SW1_CS2,  SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their anodes connected to the `SW1` pin, and their cathodes on the `CS1`, `CS2` and `CS3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3742a_led_t PROGMEM g_is31fl3742a_leds[IS31FL3742A_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, SW1_CS1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 12, figure 8.
+
+## API {#api}
+
+### `struct is31fl3742a_led_t` {#api-is31fl3742a-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3742a-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3742a_init(uint8_t index)` {#api-is31fl3742a-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3742a-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3742a_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3742a-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3742a-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3742a_select_page(uint8_t index, uint8_t page)` {#api-is31fl3742a-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-is31fl3742a-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void is31fl3742a_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3742a-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3742a_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3742a-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3742a_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3742a_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3742a-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3742a-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3742a_set_value(int index, uint8_t value)` {#api-is31fl3742a-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3742a_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3742a-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3742a_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3742a_set_value_all(uint8_t value)` {#api-is31fl3742a-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3742a-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3742a_set_scaling_register(uint8_t index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3742a-set-scaling-register-rgb}
+
+Configure the scaling registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3742a_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3742a-set-scaling-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3742a_leds` array).
+ - `uint8_t red`  
+   The scaling value for the red channel.
+ - `uint8_t green`  
+   The scaling value for the green channel.
+ - `uint8_t blue`  
+   The scaling value for the blue channel.
+
+---
+
+### `void is31fl3742a_set_scaling_register(uint8_t index, uint8_t value)` {#api-is31fl3742a-set-scaling-register-mono}
+
+Configure the scaling register for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3742a_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3742a-set-scaling-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3742a_leds` array).
+ - `uint8_t value`  
+   The scaling value for the LED.
+
+---
+
+### `void is31fl3742a_update_pwm_buffers(uint8_t index)` {#api-is31fl3742a-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3742a-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3742a_update_scaling_registers(uint8_t index)` {#api-is31fl3742a-update-scaling-registers}
+
+Flush the scaling register values to the LED driver.
+
+#### Arguments {#api-is31fl3742a-update-scaling-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3743a.md

@@ -0,0 +1,320 @@
+# IS31FL3743A Driver {#is31fl3743a-driver}
+
+I²C 18x11 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 198 single-color LEDs, or 66 RGB LEDs.
+
+[IS31FL3743A Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3743A_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3743A driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3743a` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3743a-mono.c # For single-color
+SRC += is31fl3743a.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                       |Default                        |Description                                         |
+|-----------------------------|-------------------------------|----------------------------------------------------|
+|`IS31FL3743A_SDB_PIN`        |*Not defined*                  |The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3743A_I2C_TIMEOUT`    |`100`                          |The I²C timeout in milliseconds                     |
+|`IS31FL3743A_I2C_PERSISTENCE`|`0`                            |The number of times to retry I²C transmissions      |
+|`IS31FL3743A_I2C_ADDRESS_1`  |*Not defined*                  |The I²C address of driver 0                         |
+|`IS31FL3743A_I2C_ADDRESS_2`  |*Not defined*                  |The I²C address of driver 1                         |
+|`IS31FL3743A_I2C_ADDRESS_3`  |*Not defined*                  |The I²C address of driver 2                         |
+|`IS31FL3743A_I2C_ADDRESS_4`  |*Not defined*                  |The I²C address of driver 3                         |
+|`IS31FL3743A_SYNC_1`         |`IS31FL3743A_SYNC_NONE`        |The sync configuration for driver 0                 |
+|`IS31FL3743A_SYNC_2`         |`IS31FL3743A_SYNC_NONE`        |The sync configuration for driver 1                 |
+|`IS31FL3743A_SYNC_3`         |`IS31FL3743A_SYNC_NONE`        |The sync configuration for driver 2                 |
+|`IS31FL3743A_SYNC_4`         |`IS31FL3743A_SYNC_NONE`        |The sync configuration for driver 3                 |
+|`IS31FL3743A_CONFIGURATION`  |`0x01`                         |The value of the configuration register             |
+|`IS31FL3743A_SW_PULLDOWN`    |`IS31FL3743A_PDR_2K_OHM_SW_OFF`|The `SWx` pulldown resistor value                   |
+|`IS31FL3743A_CS_PULLUP`      |`IS31FL3743A_PUR_2K_OHM_CS_OFF`|The `CSx` pullup resistor value                     |
+|`IS31FL3743A_GLOBAL_CURRENT` |`0xFF`                         |The global current control value                    |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3743A has 16 possible 7-bit I²C addresses, depending on how the `ADDR1` and `ADDR2` pins are connected.
+
+To configure this, set the `IS31FL3743A_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                           |Value |
+|---------------------------------|------|
+|`IS31FL3743A_I2C_ADDRESS_GND_GND`|`0x20`|
+|`IS31FL3743A_I2C_ADDRESS_GND_SCL`|`0x21`|
+|`IS31FL3743A_I2C_ADDRESS_GND_SDA`|`0x22`|
+|`IS31FL3743A_I2C_ADDRESS_GND_VCC`|`0x23`|
+|`IS31FL3743A_I2C_ADDRESS_SCL_GND`|`0x24`|
+|`IS31FL3743A_I2C_ADDRESS_SCL_SCL`|`0x25`|
+|`IS31FL3743A_I2C_ADDRESS_SCL_SDA`|`0x26`|
+|`IS31FL3743A_I2C_ADDRESS_SCL_VCC`|`0x27`|
+|`IS31FL3743A_I2C_ADDRESS_SDA_GND`|`0x28`|
+|`IS31FL3743A_I2C_ADDRESS_SDA_SCL`|`0x29`|
+|`IS31FL3743A_I2C_ADDRESS_SDA_SDA`|`0x2A`|
+|`IS31FL3743A_I2C_ADDRESS_SDA_VCC`|`0x2B`|
+|`IS31FL3743A_I2C_ADDRESS_VCC_GND`|`0x2C`|
+|`IS31FL3743A_I2C_ADDRESS_VCC_SCL`|`0x2D`|
+|`IS31FL3743A_I2C_ADDRESS_VCC_SDA`|`0x2E`|
+|`IS31FL3743A_I2C_ADDRESS_VCC_VCC`|`0x2F`|
+
+### Multi-Driver Synchronization {#multi-driver-synchronization}
+
+Multiple IS31FL3743A drivers can be synchronized by connecting the `SYNC` pins together. One driver must be designated as the "master", and the others configured as "slave".
+
+To do this, set the `IS31FL3743A_SYNC_n` defines accordingly in your `config.h`, where *n* denotes the driver index:
+
+|Define                   |Value                      |
+|-------------------------|---------------------------|
+|`IS31FL3743A_SYNC_NONE`  |No synchronization         |
+|`IS31FL3743A_SYNC_MASTER`|Driver configured as master|
+|`IS31FL3743A_SYNC_SLAVE` |Driver configured as slave |
+
+### De-Ghosting {#de-ghosting}
+
+These settings control the pulldown and pullup resistor values on the `SWy` and `CSx` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 23) for more information on how and why this occurs.
+
+To adjust the resistor values, add the following to your `config.h`:
+
+```c
+#define IS31FL3743A_SW_PULLDOWN IS31FL3743A_PDR_2K_OHM_SW_OFF
+#define IS31FL3743A_CS_PULLUP IS31FL3743A_PUR_2K_OHM_CS_OFF
+```
+
+Valid values for `IS31FL3743A_SW_PULLDOWN` are:
+
+|Define                          |Resistance                    |
+|--------------------------------|------------------------------|
+|`IS31FL3743A_PDR_0_OHM`         |None (default)                |
+|`IS31FL3743A_PDR_0K5_OHM_SW_OFF`|0.5 kΩ in SWx off time        |
+|`IS31FL3743A_PDR_1K_OHM_SW_OFF` |1 kΩ in SWx off time          |
+|`IS31FL3743A_PDR_2K_OHM_SW_OFF` |2 kΩ in SWx off time (default)|
+|`IS31FL3743A_PDR_1K_OHM`        |1 kΩ                          |
+|`IS31FL3743A_PDR_2K_OHM`        |2 kΩ                          |
+|`IS31FL3743A_PDR_4K_OHM`        |4 kΩ                          |
+|`IS31FL3743A_PDR_8K_OHM`        |8 kΩ                          |
+
+Valid values for `IS31FL3743A_CS_PULLUP` are:
+
+|Define                          |Resistance                    |
+|--------------------------------|------------------------------|
+|`IS31FL3743A_PUR_0_OHM`         |None (default)                |
+|`IS31FL3743A_PUR_0K5_OHM_CS_OFF`|0.5 kΩ in CSy off time        |
+|`IS31FL3743A_PUR_1K_OHM_CS_OFF` |1 kΩ in CSy off time          |
+|`IS31FL3743A_PUR_2K_OHM_CS_OFF` |2 kΩ in CSy off time (default)|
+|`IS31FL3743A_PUR_1K_OHM`        |1 kΩ                          |
+|`IS31FL3743A_PUR_2K_OHM`        |2 kΩ                          |
+|`IS31FL3743A_PUR_4K_OHM`        |4 kΩ                          |
+|`IS31FL3743A_PUR_8K_OHM`        |8 kΩ                          |
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSy` pins, from 0 to 255. By default, the value is the maximum (255), but if you need to lower it, add the following to your `config.h`:
+
+```c
+#define IS31FL3743A_GLOBAL_CURRENT 0xFF
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3743a_led_t PROGMEM g_is31fl3743a_leds[IS31FL3743A_LED_COUNT] = {
+/* Driver
+ *   |  R         G         B */
+    {0, SW1_CS1,  SW1_CS2,  SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their anodes connected to the `SW1` pin, and their cathodes on the `CS1`, `CS2` and `CS3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3743a_led_t PROGMEM g_is31fl3743a_leds[IS31FL3743A_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, SW1_CS1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 12, figure 8.
+
+## API {#api}
+
+### `struct is31fl3743a_led_t` {#api-is31fl3743a-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3743a-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3743a_init(uint8_t index)` {#api-is31fl3743a-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3743a-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3743a_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3743a-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3743a-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3743a_select_page(uint8_t index, uint8_t page)` {#api-is31fl3743a-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-is31fl3743a-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void is31fl3743a_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3743a-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3743a_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3743a-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3743a_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3743a_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3743a-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3743a-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3743a_set_value(int index, uint8_t value)` {#api-is31fl3743a-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3743a_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3743a-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3743a_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3743a_set_value_all(uint8_t value)` {#api-is31fl3743a-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3743a-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3743a_set_scaling_register(uint8_t index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3743a-set-scaling-register-rgb}
+
+Configure the scaling registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3743a_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3743a-set-scaling-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3743a_leds` array).
+ - `uint8_t red`  
+   The scaling value for the red channel.
+ - `uint8_t green`  
+   The scaling value for the green channel.
+ - `uint8_t blue`  
+   The scaling value for the blue channel.
+
+---
+
+### `void is31fl3743a_set_scaling_register(uint8_t index, uint8_t value)` {#api-is31fl3743a-set-scaling-register-mono}
+
+Configure the scaling register for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3743a_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3743a-set-scaling-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3743a_leds` array).
+ - `uint8_t value`  
+   The scaling value for the LED.
+
+---
+
+### `void is31fl3743a_update_pwm_buffers(uint8_t index)` {#api-is31fl3743a-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3743a-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3743a_update_scaling_registers(uint8_t index)` {#api-is31fl3743a-update-scaling-registers}
+
+Flush the scaling register values to the LED driver.
+
+#### Arguments {#api-is31fl3743a-update-scaling-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3745.md

@@ -0,0 +1,320 @@
+# IS31FL3745 Driver {#is31fl3745-driver}
+
+I²C 18x8 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 144 single-color LEDs, or 48 RGB LEDs.
+
+[IS31FL3745 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3745_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3745 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3745` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3745-mono.c # For single-color
+SRC += is31fl3745.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default                       |Description                                         |
+|----------------------------|------------------------------|----------------------------------------------------|
+|`IS31FL3745_SDB_PIN`        |*Not defined*                 |The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3745_I2C_TIMEOUT`    |`100`                         |The I²C timeout in milliseconds                     |
+|`IS31FL3745_I2C_PERSISTENCE`|`0`                           |The number of times to retry I²C transmissions      |
+|`IS31FL3745_I2C_ADDRESS_1`  |*Not defined*                 |The I²C address of driver 0                         |
+|`IS31FL3745_I2C_ADDRESS_2`  |*Not defined*                 |The I²C address of driver 1                         |
+|`IS31FL3745_I2C_ADDRESS_3`  |*Not defined*                 |The I²C address of driver 2                         |
+|`IS31FL3745_I2C_ADDRESS_4`  |*Not defined*                 |The I²C address of driver 3                         |
+|`IS31FL3745_SYNC_1`         |`IS31FL3745_SYNC_NONE`        |The sync configuration for driver 0                 |
+|`IS31FL3745_SYNC_2`         |`IS31FL3745_SYNC_NONE`        |The sync configuration for driver 1                 |
+|`IS31FL3745_SYNC_3`         |`IS31FL3745_SYNC_NONE`        |The sync configuration for driver 2                 |
+|`IS31FL3745_SYNC_4`         |`IS31FL3745_SYNC_NONE`        |The sync configuration for driver 3                 |
+|`IS31FL3745_CONFIGURATION`  |`0x31`                        |The value of the configuration register             |
+|`IS31FL3745_SW_PULLDOWN`    |`IS31FL3745_PDR_2K_OHM_SW_OFF`|The `SWx` pulldown resistor value                   |
+|`IS31FL3745_CS_PULLUP`      |`IS31FL3745_PUR_2K_OHM_CS_OFF`|The `CSx` pullup resistor value                     |
+|`IS31FL3745_GLOBAL_CURRENT` |`0xFF`                        |The global current control value                    |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3745 has 16 possible 7-bit I²C addresses, depending on how the `ADDR1` and `ADDR2` pins are connected.
+
+To configure this, set the `IS31FL3745_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                          |Value |
+|--------------------------------|------|
+|`IS31FL3745_I2C_ADDRESS_GND_GND`|`0x20`|
+|`IS31FL3745_I2C_ADDRESS_GND_SCL`|`0x21`|
+|`IS31FL3745_I2C_ADDRESS_GND_SDA`|`0x22`|
+|`IS31FL3745_I2C_ADDRESS_GND_VCC`|`0x23`|
+|`IS31FL3745_I2C_ADDRESS_SCL_GND`|`0x24`|
+|`IS31FL3745_I2C_ADDRESS_SCL_SCL`|`0x25`|
+|`IS31FL3745_I2C_ADDRESS_SCL_SDA`|`0x26`|
+|`IS31FL3745_I2C_ADDRESS_SCL_VCC`|`0x27`|
+|`IS31FL3745_I2C_ADDRESS_SDA_GND`|`0x28`|
+|`IS31FL3745_I2C_ADDRESS_SDA_SCL`|`0x29`|
+|`IS31FL3745_I2C_ADDRESS_SDA_SDA`|`0x2A`|
+|`IS31FL3745_I2C_ADDRESS_SDA_VCC`|`0x2B`|
+|`IS31FL3745_I2C_ADDRESS_VCC_GND`|`0x2C`|
+|`IS31FL3745_I2C_ADDRESS_VCC_SCL`|`0x2D`|
+|`IS31FL3745_I2C_ADDRESS_VCC_SDA`|`0x2E`|
+|`IS31FL3745_I2C_ADDRESS_VCC_VCC`|`0x2F`|
+
+### Multi-Driver Synchronization {#multi-driver-synchronization}
+
+Multiple IS31FL3745 drivers can be synchronized by connecting the `SYNC` pins together. One driver must be designated as the "master", and the others configured as "slave".
+
+To do this, set the `IS31FL3745_SYNC_n` defines accordingly in your `config.h`, where *n* denotes the driver index:
+
+|Define                  |Value                      |
+|------------------------|---------------------------|
+|`IS31FL3745_SYNC_NONE`  |No synchronization         |
+|`IS31FL3745_SYNC_MASTER`|Driver configured as master|
+|`IS31FL3745_SYNC_SLAVE` |Driver configured as slave |
+
+### De-Ghosting {#de-ghosting}
+
+These settings control the pulldown and pullup resistor values on the `SWy` and `CSx` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 23) for more information on how and why this occurs.
+
+To adjust the resistor values, add the following to your `config.h`:
+
+```c
+#define IS31FL3745_SW_PULLDOWN IS31FL3745_PDR_2K_OHM_SW_OFF
+#define IS31FL3745_CS_PULLUP IS31FL3745_PUR_2K_OHM_CS_OFF
+```
+
+Valid values for `IS31FL3745_SW_PULLDOWN` are:
+
+|Define                         |Resistance                    |
+|-------------------------------|------------------------------|
+|`IS31FL3745_PDR_0_OHM`         |None (default)                |
+|`IS31FL3745_PDR_0K5_OHM_SW_OFF`|0.5 kΩ in SWx off time        |
+|`IS31FL3745_PDR_1K_OHM_SW_OFF` |1 kΩ in SWx off time          |
+|`IS31FL3745_PDR_2K_OHM_SW_OFF` |2 kΩ in SWx off time (default)|
+|`IS31FL3745_PDR_1K_OHM`        |1 kΩ                          |
+|`IS31FL3745_PDR_2K_OHM`        |2 kΩ                          |
+|`IS31FL3745_PDR_4K_OHM`        |4 kΩ                          |
+|`IS31FL3745_PDR_8K_OHM`        |8 kΩ                          |
+
+Valid values for `IS31FL3745_CS_PULLUP` are:
+
+|Define                         |Resistance                    |
+|-------------------------------|------------------------------|
+|`IS31FL3745_PUR_0_OHM`         |None (default)                |
+|`IS31FL3745_PUR_0K5_OHM_CS_OFF`|0.5 kΩ in CSy off time        |
+|`IS31FL3745_PUR_1K_OHM_CS_OFF` |1 kΩ in CSy off time          |
+|`IS31FL3745_PUR_2K_OHM_CS_OFF` |2 kΩ in CSy off time (default)|
+|`IS31FL3745_PUR_1K_OHM`        |1 kΩ                          |
+|`IS31FL3745_PUR_2K_OHM`        |2 kΩ                          |
+|`IS31FL3745_PUR_4K_OHM`        |4 kΩ                          |
+|`IS31FL3745_PUR_8K_OHM`        |8 kΩ                          |
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSy` pins, from 0 to 255. By default, the value is the maximum (255), but if you need to lower it, add the following to your `config.h`:
+
+```c
+#define IS31FL3745_GLOBAL_CURRENT 0xFF
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3745_led_t PROGMEM g_is31fl3745_leds[IS31FL3745_LED_COUNT] = {
+/* Driver
+ *   |  R         G         B */
+    {0, SW1_CS1,  SW1_CS2,  SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their anodes connected to the `SW1` pin, and their cathodes on the `CS1`, `CS2` and `CS3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3745_led_t PROGMEM g_is31fl3745_leds[IS31FL3745_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, SW1_CS1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 12, figure 9.
+
+## API {#api}
+
+### `struct is31fl3745_led_t` {#api-is31fl3745-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3745-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3745_init(uint8_t index)` {#api-is31fl3745-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3745-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3745_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3745-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3745-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3745_select_page(uint8_t index, uint8_t page)` {#api-is31fl3745-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-is31fl3745-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void is31fl3745_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3745-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3745_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3745-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3745_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3745_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3745-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3745-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3745_set_value(int index, uint8_t value)` {#api-is31fl3745-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3745_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3745-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3745_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3745_set_value_all(uint8_t value)` {#api-is31fl3745-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3745-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3745_set_scaling_register(uint8_t index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3745-set-scaling-register-rgb}
+
+Configure the scaling registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3745_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3745-set-scaling-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3745_leds` array).
+ - `uint8_t red`  
+   The scaling value for the red channel.
+ - `uint8_t green`  
+   The scaling value for the green channel.
+ - `uint8_t blue`  
+   The scaling value for the blue channel.
+
+---
+
+### `void is31fl3745_set_scaling_register(uint8_t index, uint8_t value)` {#api-is31fl3745-set-scaling-register-mono}
+
+Configure the scaling register for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3745_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3745-set-scaling-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3745_leds` array).
+ - `uint8_t value`  
+   The scaling value for the LED.
+
+---
+
+### `void is31fl3745_update_pwm_buffers(uint8_t index)` {#api-is31fl3745-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3745-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3745_update_scaling_registers(uint8_t index)` {#api-is31fl3745-update-scaling-registers}
+
+Flush the scaling register values to the LED driver.
+
+#### Arguments {#api-is31fl3745-update-scaling-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/is31fl3746a.md

@@ -0,0 +1,327 @@
+# IS31FL3746A Driver {#is31fl3746a-driver}
+
+I²C 18x4 LED matrix driver by Lumissil. Supports a maximum of four drivers, each controlling up to 72 single-color LEDs, or 24 RGB LEDs.
+
+[IS31FL3746A Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3746A_DS.pdf)
+
+## Usage {#usage}
+
+The IS31FL3746A driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3746a` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led/issi
+SRC += is31fl3746a-mono.c # For single-color
+SRC += is31fl3746a.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                       |Default                           |Description                                         |
+|-----------------------------|----------------------------------|----------------------------------------------------|
+|`IS31FL3746A_SDB_PIN`        |*Not defined*                     |The GPIO pin connected to the drivers' shutdown pins|
+|`IS31FL3746A_I2C_TIMEOUT`    |`100`                             |The I²C timeout in milliseconds                     |
+|`IS31FL3746A_I2C_PERSISTENCE`|`0`                               |The number of times to retry I²C transmissions      |
+|`IS31FL3746A_I2C_ADDRESS_1`  |*Not defined*                     |The I²C address of driver 0                         |
+|`IS31FL3746A_I2C_ADDRESS_2`  |*Not defined*                     |The I²C address of driver 1                         |
+|`IS31FL3746A_I2C_ADDRESS_3`  |*Not defined*                     |The I²C address of driver 2                         |
+|`IS31FL3746A_I2C_ADDRESS_4`  |*Not defined*                     |The I²C address of driver 3                         |
+|`IS31FL3746A_CONFIGURATION`  |`0x01`                            |The value of the configuration register             |
+|`IS31FL3746A_PWM_FREQUENCY`  |`IS31FL3746A_PWM_FREQUENCY_29K_HZ`|The PWM frequency of the LEDs                       |
+|`IS31FL3746A_SW_PULLDOWN`    |`IS31FL3746A_PDR_2K_OHM_SW_OFF`   |The `SWx` pulldown resistor value                   |
+|`IS31FL3746A_CS_PULLUP`      |`IS31FL3746A_PUR_2K_OHM_CS_OFF`   |The `CSx` pullup resistor value                     |
+|`IS31FL3746A_GLOBAL_CURRENT` |`0xFF`                            |The global current control value                    |
+
+### I²C Addressing {#i2c-addressing}
+
+The IS31FL3746A has 16 possible 7-bit I²C addresses, depending on how the `ADDR1` and `ADDR2` pins are connected.
+
+To configure this, set the `IS31FL3746A_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                           |Value |
+|---------------------------------|------|
+|`IS31FL3746A_I2C_ADDRESS_GND_GND`|`0x60`|
+|`IS31FL3746A_I2C_ADDRESS_GND_SCL`|`0x61`|
+|`IS31FL3746A_I2C_ADDRESS_GND_SDA`|`0x62`|
+|`IS31FL3746A_I2C_ADDRESS_GND_VCC`|`0x63`|
+|`IS31FL3746A_I2C_ADDRESS_SCL_GND`|`0x64`|
+|`IS31FL3746A_I2C_ADDRESS_SCL_SCL`|`0x65`|
+|`IS31FL3746A_I2C_ADDRESS_SCL_SDA`|`0x66`|
+|`IS31FL3746A_I2C_ADDRESS_SCL_VCC`|`0x67`|
+|`IS31FL3746A_I2C_ADDRESS_SDA_GND`|`0x68`|
+|`IS31FL3746A_I2C_ADDRESS_SDA_SCL`|`0x69`|
+|`IS31FL3746A_I2C_ADDRESS_SDA_SDA`|`0x6A`|
+|`IS31FL3746A_I2C_ADDRESS_SDA_VCC`|`0x6B`|
+|`IS31FL3746A_I2C_ADDRESS_VCC_GND`|`0x6C`|
+|`IS31FL3746A_I2C_ADDRESS_VCC_SCL`|`0x6D`|
+|`IS31FL3746A_I2C_ADDRESS_VCC_SDA`|`0x6E`|
+|`IS31FL3746A_I2C_ADDRESS_VCC_VCC`|`0x6F`|
+
+### PWM Frequency {#pwm-frequency}
+
+The PWM frequency can be adjusted by adding the following to your `config.h`:
+
+```c
+#define IS31FL3746A_PWM_FREQUENCY IS31FL3746A_PWM_FREQUENCY_29K_HZ
+```
+
+Valid values are:
+
+|Define                             |Frequency       |
+|-----------------------------------|----------------|
+|`IS31FL3746A_PWM_FREQUENCY_29K_HZ` |29 kHz (default)|
+|`IS31FL3746A_PWM_FREQUENCY_14K5_HZ`|14.5 kHz        |
+|`IS31FL3746A_PWM_FREQUENCY_7K25_HZ`|7.25 kHz        |
+|`IS31FL3746A_PWM_FREQUENCY_3K63_HZ`|3.63 kHz        |
+|`IS31FL3746A_PWM_FREQUENCY_1K81_HZ`|1.81 kHz        |
+|`IS31FL3746A_PWM_FREQUENCY_906_HZ` |906 Hz          |
+|`IS31FL3746A_PWM_FREQUENCY_453_HZ` |453 Hz          |
+
+### De-Ghosting {#de-ghosting}
+
+These settings control the pulldown and pullup resistor values on the `SWy` and `CSx` pins respectively, for the purposes of eliminating ghosting. Refer to the datasheet (p. 23) for more information on how and why this occurs.
+
+To adjust the resistor values, add the following to your `config.h`:
+
+```c
+#define IS31FL3746A_SW_PULLDOWN IS31FL3746A_PDR_2K_OHM_SW_OFF
+#define IS31FL3746A_CS_PULLUP IS31FL3746A_PUR_2K_OHM_CS_OFF
+```
+
+Valid values for `IS31FL3746A_SW_PULLDOWN` are:
+
+|Define                          |Resistance                    |
+|--------------------------------|------------------------------|
+|`IS31FL3746A_PDR_0_OHM`         |None                          |
+|`IS31FL3746A_PDR_0K5_OHM_SW_OFF`|0.5 kΩ in SWx off time        |
+|`IS31FL3746A_PDR_1K_OHM_SW_OFF` |1 kΩ in SWx off time          |
+|`IS31FL3746A_PDR_2K_OHM_SW_OFF` |2 kΩ in SWx off time (default)|
+|`IS31FL3746A_PDR_1K_OHM`        |1 kΩ                          |
+|`IS31FL3746A_PDR_2K_OHM`        |2 kΩ                          |
+|`IS31FL3746A_PDR_4K_OHM`        |4 kΩ                          |
+|`IS31FL3746A_PDR_8K_OHM`        |8 kΩ                          |
+
+Valid values for `IS31FL3746A_CS_PULLUP` are:
+
+|Define                          |Resistance                    |
+|--------------------------------|------------------------------|
+|`IS31FL3746A_PUR_0_OHM`         |None (default)                |
+|`IS31FL3746A_PUR_0K5_OHM_CS_OFF`|0.5 kΩ in CSy off time        |
+|`IS31FL3746A_PUR_1K_OHM_CS_OFF` |1 kΩ in CSy off time          |
+|`IS31FL3746A_PUR_2K_OHM_CS_OFF` |2 kΩ in CSy off time (default)|
+|`IS31FL3746A_PUR_1K_OHM`        |1 kΩ                          |
+|`IS31FL3746A_PUR_2K_OHM`        |2 kΩ                          |
+|`IS31FL3746A_PUR_4K_OHM`        |4 kΩ                          |
+|`IS31FL3746A_PUR_8K_OHM`        |8 kΩ                          |
+
+### Global Current Control {#global-current-control}
+
+This setting controls the current sunk by the `CSy` pins, from 0 to 255. By default, the value is the maximum (255), but if you need to lower it, add the following to your `config.h`:
+
+```c
+#define IS31FL3746A_GLOBAL_CURRENT 0xFF
+```
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const is31fl3746a_led_t PROGMEM g_is31fl3746a_leds[IS31FL3746A_LED_COUNT] = {
+/* Driver
+ *   |  R         G         B */
+    {0, SW1_CS1,  SW1_CS2,  SW1_CS3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their anodes connected to the `SW1` pin, and their cathodes on the `CS1`, `CS2` and `CS3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const is31fl3746a_led_t PROGMEM g_is31fl3746a_leds[IS31FL3746A_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, SW1_CS1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 13, figure 8.
+
+## API {#api}
+
+### `struct is31fl3746a_led_t` {#api-is31fl3746a-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-is31fl3746a-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void is31fl3746a_init(uint8_t index)` {#api-is31fl3746a-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-is31fl3746a-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t sync`  
+   Sync configuration of the LED driver.
+
+---
+
+### `void is31fl3746a_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-is31fl3746a-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-is31fl3746a-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void is31fl3746a_select_page(uint8_t index, uint8_t page)` {#api-is31fl3746a-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-is31fl3746a-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void is31fl3746a_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3746a-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3746a_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3746a-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3746a_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3746a_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3746a-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-is31fl3746a-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void is31fl3746a_set_value(int index, uint8_t value)` {#api-is31fl3746a-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3746a_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-is31fl3746a-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_is31fl3746a_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3746a_set_value_all(uint8_t value)` {#api-is31fl3746a-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-is31fl3746a-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void is31fl3746a_set_scaling_register(uint8_t index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3746a-set-scaling-register-rgb}
+
+Configure the scaling registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3746a_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3746a-set-scaling-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3746a_leds` array).
+ - `uint8_t red`  
+   The scaling value for the red channel.
+ - `uint8_t green`  
+   The scaling value for the green channel.
+ - `uint8_t blue`  
+   The scaling value for the blue channel.
+
+---
+
+### `void is31fl3746a_set_scaling_register(uint8_t index, uint8_t value)` {#api-is31fl3746a-set-scaling-register-mono}
+
+Configure the scaling register for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3746a_update_scaling_registers()` after you are finished.
+
+#### Arguments {#api-is31fl3746a-set-scaling-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_is31fl3746a_leds` array).
+ - `uint8_t value`  
+   The scaling value for the LED.
+
+---
+
+### `void is31fl3746a_update_pwm_buffers(uint8_t index)` {#api-is31fl3746a-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-is31fl3746a-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void is31fl3746a_update_scaling_registers(uint8_t index)` {#api-is31fl3746a-update-scaling-registers}
+
+Flush the scaling register values to the LED driver.
+
+#### Arguments {#api-is31fl3746a-update-scaling-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/serial.md

@@ -1,6 +1,6 @@
 # 'serial' Driver
 
-The Serial driver powers the [Split Keyboard](../features/split_keyboard) feature. Several implementations are available that cater to the platform and capabilites of MCU in use. Note that none of the drivers support split keyboards with more than two halves.
+The Serial driver powers the [Split Keyboard](../features/split_keyboard) feature. Several implementations are available that cater to the platform and capabilities of MCU in use. Note that none of the drivers support split keyboards with more than two halves.
 
 | Driver                                  | AVR                | ARM                | Connection between halves                                                                     |
 | --------------------------------------- | ------------------ | ------------------ | --------------------------------------------------------------------------------------------- |
@@ -12,8 +12,6 @@ The Serial driver powers the [Split Keyboard](../features/split_keyboard) featur
 Serial in this context should be read as **sending information one bit at a time**, rather than implementing UART/USART/RS485/RS232 standards.
 :::
 
-<hr>
-
 ## Bitbang
 
 This is the Default driver, absence of configuration assumes this driver. It works by [bit banging](https://en.wikipedia.org/wiki/Bit_banging) a GPIO pin using the CPU. It is therefore not as efficient as a dedicated hardware peripheral, which the Half-duplex and Full-duplex drivers use.
@@ -53,11 +51,15 @@ SERIAL_DRIVER = bitbang
 #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
 ```
 
-3. On ARM platforms you must turn on ChibiOS `PAL_USE_CALLBACKS` feature:
+3. On ARM platforms you must turn on ChibiOS PAL callbacks:
 
-* In `halconf.h` add the line `#define PAL_USE_CALLBACKS TRUE`.
+```c
+#pragma once
 
-<hr>
+#define PAL_USE_CALLBACKS TRUE // [!code focus]
+
+#include_next <halconf.h>
+```
 
 ## USART Half-duplex
 
@@ -117,8 +119,6 @@ For STM32 MCUs several GPIO configuration options can be changed as well. See th
 
 4. Decide either for `SERIAL`, `SIO`, or `PIO` subsystem. See section ["Choosing a driver subsystem"](#choosing-a-driver-subsystem).
 
-<hr>
-
 ## USART Full-duplex
 
 Targeting ARM boards based on ChibiOS where communication is offloaded to an USART hardware device. The advantages over bitbanging are fast, accurate timings and reduced CPU usage; therefore it is advised to choose this driver over all others where possible. Due to its internal design Full-duplex is slightly more efficient than the Half-duplex driver, but Full-duplex should be primarily chosen if Half-duplex operation is not supported by the controller's USART peripheral.
@@ -179,38 +179,46 @@ For STM32 MCUs several GPIO configuration options, including the ability for `TX
 
 4. Decide either for `SERIAL`, `SIO`, or `PIO` subsystem. See section ["Choosing a driver subsystem"](#choosing-a-driver-subsystem).
 
-<hr>
-
 ## Choosing a driver subsystem
 
 ### The `SERIAL` driver
 
 The `SERIAL` Subsystem is supported for the majority of ChibiOS MCUs and should be used whenever supported. Follow these steps in order to activate it:
 
-1. In your keyboards `halconf.h` add:
+1. Enable the SERIAL subsystem in the ChibiOS HAL.
 
-```c
-#define HAL_USE_SERIAL TRUE
-```
+   Add the following to your keyboard's `halconf.h`, creating it if necessary:
 
-2. In your keyboards `mcuconf.h`: activate the USART peripheral that is used on your MCU. The shown example is for an STM32 MCU, so this will not work on MCUs by other manufacturers. You can find the correct names in the `mcuconf.h` files of your MCU that ship with ChibiOS. 
- 
-Just below `#include_next <mcuconf.h>` add:
+   ```c
+   #pragma once
 
-```c
-#include_next <mcuconf.h>
+   #define HAL_USE_SERIAL TRUE // [!code focus]
 
-#undef STM32_SERIAL_USE_USARTn
-#define STM32_SERIAL_USE_USARTn TRUE
-```
+   #include_next <halconf.h>
+   ```
 
-Where 'n' matches the peripheral number of your selected USART on the MCU.
+2. Activate the USART peripheral that is used on your MCU. The shown example is for an STM32 MCU, so this will not work on MCUs by other manufacturers. You can find the correct names in the `mcuconf.h` files of your MCU that ship with ChibiOS.
 
-3. In you keyboards `config.h`: override the default USART `SERIAL` driver if you use a USART peripheral that does not belong to the default selected `SD1` driver. For instance, if you selected `STM32_SERIAL_USE_USART3` the matching driver would be `SD3`.
+   Add the following to your keyboard's `mcuconf.h`, creating it if necessary:
 
-```c
- #define SERIAL_USART_DRIVER SD3
- ```
+   ```c
+   #pragma once
+
+   #include_next <mcuconf.h>
+
+   #undef STM32_SERIAL_USE_USARTn // [!code focus]
+   #define STM32_SERIAL_USE_USARTn TRUE // [!code focus]
+   ```
+
+   Where *n* matches the peripheral number of your selected USART on the MCU.
+
+3. Override the default USART `SERIAL` driver if you use a USART peripheral that does not belong to the default selected `SD1` driver. For instance, if you selected `STM32_SERIAL_USE_USART3` the matching driver would be `SD3`.
+
+   Add the following to your keyboard's `config.h`:
+
+   ```c
+   #define SERIAL_USART_DRIVER SD3
+   ```
 
 ### The `SIO` driver
 
@@ -218,31 +226,41 @@ The `SIO` Subsystem was added to ChibiOS with the 21.11 release and is only supp
 
 Follow these steps in order to activate it:
 
-1. In your keyboards `halconf.h` add:
+1. Enable the SIO subsystem in the ChibiOS HAL.
 
-```c
-#define HAL_USE_SIO TRUE
-```
+   Add the following to your keyboard's `halconf.h`, creating it if necessary:
 
-2. In your keyboards `mcuconf.h:` activate the USART peripheral that is used on your MCU. The shown example is for an STM32 MCU, so this will not work on MCUs by other manufacturers. You can find the correct names in the `mcuconf.h` files of your MCU that ship with ChibiOS. 
- 
-Just below `#include_next <mcuconf.h>` add:
+   ```c
+   #pragma once
 
-```c
-#include_next <mcuconf.h>
+   #define HAL_USE_SIO TRUE // [!code focus]
 
-#undef STM32_SIO_USE_USARTn
-#define STM32_SIO_USE_USARTn TRUE
-```
+   #include_next <halconf.h>
+   ```
 
-Where 'n' matches the peripheral number of your selected USART on the MCU.
+2. Activate the USART peripheral that is used on your MCU. The shown example is for an STM32 MCU, so this will not work on MCUs by other manufacturers. You can find the correct names in the `mcuconf.h` files of your MCU that ship with ChibiOS.
 
-3. In the keyboard's `config.h` file: override the default USART `SIO` driver if you use a USART peripheral that does not belong to the default selected `SIOD1` driver. For instance, if you selected `STM32_SERIAL_USE_USART3` the matching driver would be `SIOD3`.
+   Add the following to your keyboard's `mcuconf.h`, creating it if necessary:
+
+   ```c
+   #pragma once
+
+   #include_next <mcuconf.h>
+
+   #undef STM32_SIO_USE_USARTn // [!code focus]
+   #define STM32_SIO_USE_USARTn TRUE // [!code focus]
+   ```
+
+   Where *n* matches the peripheral number of your selected USART on the MCU.
+
+3. Override the default USART `SIO` driver if you use a USART peripheral that does not belong to the default selected `SIOD1` driver. For instance, if you selected `STM32_SERIAL_USE_USART3` the matching driver would be `SIOD3`.
+
+   Add the following to your keyboard's `config.h`:
+
+   ```c
+   #define SERIAL_USART_DRIVER SIOD3
+   ```
 
-```c
- #define SERIAL_USART_DRIVER SIOD3
- ```
- 
 ### The `PIO` driver
 
 The `PIO` subsystem is a Raspberry Pi RP2040 specific implementation, using an integrated PIO peripheral and is therefore only available on this MCU. Because of the flexible nature of PIO peripherals, **any** GPIO pin can be used as a `TX` or `RX` pin. Half-duplex and Full-duplex operation modes are fully supported with this driver. Half-duplex uses the built-in pull-ups and GPIO manipulation of the RP2040 to drive the line high by default, thus an external pull-up resistor **is not required**.
@@ -254,8 +272,6 @@ Optionally, the PIO peripheral utilized for split communication can be changed w
 
 The Serial PIO program uses 2 state machines, 13 instructions and the complete interrupt handler of the PIO peripheral it is running on.
 
-<hr>
-
 ## Advanced Configuration
 
 There are several advanced configuration options that can be defined in your keyboards `config.h` file:
@@ -265,9 +281,11 @@ There are several advanced configuration options that can be defined in your key
 If you're having issues or need a higher baudrate with serial communication, you can change the baudrate which in turn controls the communication speed for serial. You want to lower the baudrate if you experience failed transactions. 
 
 ```c
-#define SELECT_SOFT_SERIAL_SPEED {#}
+#define SELECT_SOFT_SERIAL_SPEED n
 ```
 
+Where *n* is one of:
+
 | Speed | Bitbang                    | Half-duplex and Full-duplex |
 | ----- | -------------------------- | --------------------------- |
 | `0`   | 189000 baud (experimental) | 460800 baud                 |
@@ -287,8 +305,6 @@ This is the default time window in milliseconds in which a successful communicat
 #define SERIAL_USART_TIMEOUT 20    // USART driver timeout. default 20
 ```
 
-<hr>
-
 ## Troubleshooting
 
 If you're having issues withe serial communication, you can enable debug messages that will give you insights which part of the communication failed. The enable these messages add to your keyboards `config.h` file:

docs/drivers/snled27351.md

@@ -0,0 +1,245 @@
+# SNLED27351 Driver {#snled27351-driver}
+
+I²C 16x12 LED matrix driver by Sonix. Supports a maximum of four drivers, each controlling up to 192 single-color LEDs, or 64 RGB LEDs.
+
+A slightly modified version of this IC is also known as "CKLED2001".
+
+[SNLED27351 Datasheet](https://www.sonix.com.tw/files/1/D235860C0C037C28E050007F01001CBE)
+
+## Usage {#usage}
+
+The SNLED27351 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `snled27351` driver set, and you would use those APIs instead.
+
+However, if you need to use the driver standalone, add this to your `rules.mk`:
+
+```make
+COMMON_VPATH += $(DRIVER_PATH)/led
+SRC += snled27351-mono.c # For single-color
+SRC += snled27351.c # For RGB
+I2C_DRIVER_REQUIRED = yes
+```
+
+## Basic Configuration {#basic-configuration}
+
+Add the following to your `config.h`:
+
+|Define                      |Default      |Description                                         |
+|----------------------------|-------------|----------------------------------------------------|
+|`SNLED27351_SDB_PIN`        |*Not defined*|The GPIO pin connected to the drivers' shutdown pins|
+|`SNLED27351_I2C_TIMEOUT`    |`100`        |The I²C timeout in milliseconds                     |
+|`SNLED27351_I2C_PERSISTENCE`|`0`          |The number of times to retry I²C transmissions      |
+|`SNLED27351_I2C_ADDRESS_1`  |*Not defined*|The I²C address of driver 0                         |
+|`SNLED27351_I2C_ADDRESS_2`  |*Not defined*|The I²C address of driver 1                         |
+|`SNLED27351_I2C_ADDRESS_3`  |*Not defined*|The I²C address of driver 2                         |
+|`SNLED27351_I2C_ADDRESS_4`  |*Not defined*|The I²C address of driver 3                         |
+
+### I²C Addressing {#i2c-addressing}
+
+The SNLED27351 has four possible 7-bit I²C addresses, depending on how the `ADDR` pin is connected.
+
+To configure this, set the `SNLED27351_I2C_ADDRESS_n` defines to one of the following in your `config.h`, where *n* denotes the driver index:
+
+|Define                        |Value |
+|------------------------------|------|
+|`SNLED27351_I2C_ADDRESS_GND`  |`0x74`|
+|`SNLED27351_I2C_ADDRESS_SCL`  |`0x75`|
+|`SNLED27351_I2C_ADDRESS_SDA`  |`0x76`|
+|`SNLED27351_I2C_ADDRESS_VDDIO`|`0x77`|
+
+## ARM/ChibiOS Configuration {#arm-configuration}
+
+Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
+
+## LED Mapping {#led-mapping}
+
+In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
+
+```c
+const snled27351_led_t PROGMEM g_snled27351_leds[SNLED27351_LED_COUNT] = {
+/* Driver
+ *   |  R         G         B */
+    {0, CB1_CA1,  CB1_CA2,  CB1_CA3},
+    // etc...
+};
+```
+
+In this example, the red, green and blue channels for the first LED index on driver 0 all have their cathodes connected to the `CB1` pin, and their anodes on the `CA1`, `CA2` and `CA3` pins respectively.
+
+For the single-color driver, the principle is the same, but there is only one channel:
+
+```c
+const snled27351_led_t PROGMEM g_snled27351_leds[SNLED27351_LED_COUNT] = {
+/* Driver
+ *   |  V */
+    {0, CB1_CA1},
+    // etc...
+};
+```
+
+These values correspond to the register indices as shown in the datasheet on page 13.
+
+## API {#api}
+
+### `struct snled27351_led_t` {#api-snled27351-led-t}
+
+Contains the PWM register addresses for a single RGB LED.
+
+#### Members {#api-snled27351-led-t-members}
+
+ - `uint8_t driver`  
+   The driver index of the LED, from 0 to 3.
+ - `uint8_t r`  
+   The output PWM register address for the LED's red channel (RGB driver only).
+ - `uint8_t g`  
+   The output PWM register address for the LED's green channel (RGB driver only).
+ - `uint8_t b`  
+   The output PWM register address for the LED's blue channel (RGB driver only).
+ - `uint8_t v`  
+   The output PWM register address for the LED (single-color driver only).
+
+---
+
+### `void snled27351_init(uint8_t index)` {#api-snled27351-init}
+
+Initialize the LED driver. This function should be called first.
+
+#### Arguments {#api-snled27351-init-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void snled27351_write_register(uint8_t index, uint8_t reg, uint8_t data)` {#api-snled27351-write-register}
+
+Set the value of the given register.
+
+#### Arguments {#api-snled27351-write-register-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t reg`  
+   The register address.
+ - `uint8_t data`  
+   The value to set.
+
+---
+
+### `void snled27351_select_page(uint8_t index, uint8_t page)` {#api-snled27351-select-page}
+
+Change the current page for configuring the LED driver.
+
+#### Arguments {#api-snled27351-select-page-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+ - `uint8_t page`  
+   The page number to select.
+
+---
+
+### `void snled27351_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-snled27351-set-color}
+
+Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `snled27351_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-snled27351-set-color-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_snled27351_leds` array).
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void snled27351_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-snled27351-set-color-all}
+
+Set the color of all LEDs (RGB driver only).
+
+#### Arguments {#api-snled27351-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void snled27351_set_value(int index, uint8_t value)` {#api-snled27351-set-value}
+
+Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `snled27351_update_pwm_buffers()` after you are finished.
+
+#### Arguments {#api-snled27351-set-value-arguments}
+
+ - `int index`  
+   The LED index (ie. the index into the `g_snled27351_leds` array).
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void snled27351_set_value_all(uint8_t value)` {#api-snled27351-set-value-all}
+
+Set the brightness of all LEDs (single-color driver only).
+
+#### Arguments {#api-snled27351-set-value-all-arguments}
+
+ - `uint8_t value`  
+   The brightness value to set.
+
+---
+
+### `void snled27351_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-snled27351-set-led-control-register-rgb}
+
+Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `snled27351_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-snled27351-set-led-control-register-rgb-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_snled27351_leds` array).
+ - `bool red`  
+   Enable or disable the red channel.
+ - `bool green`  
+   Enable or disable the green channel.
+ - `bool blue`  
+   Enable or disable the blue channel.
+
+---
+
+### `void snled27351_set_led_control_register(uint8_t index, bool value)` {#api-snled27351-set-led-control-register-mono}
+
+Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `snled27351_update_led_control_registers()` after you are finished.
+
+#### Arguments {#api-snled27351-set-led-control-register-mono-arguments}
+
+ - `uint8_t index`  
+   The LED index (ie. the index into the `g_snled27351_leds` array).
+ - `bool value`  
+   Enable or disable the LED.
+
+---
+
+### `void snled27351_update_pwm_buffers(uint8_t index)` {#api-snled27351-update-pwm-buffers}
+
+Flush the PWM values to the LED driver.
+
+#### Arguments {#api-snled27351-update-pwm-buffers-arguments}
+
+ - `uint8_t index`  
+   The driver index.
+
+---
+
+### `void snled27351_update_led_control_registers(uint8_t index)` {#api-snled27351-update-led-control-registers}
+
+Flush the LED control register values to the LED driver.
+
+#### Arguments {#api-snled27351-update-led-control-registers-arguments}
+
+ - `uint8_t index`  
+   The driver index.

docs/drivers/spi.md

@@ -32,20 +32,27 @@ You may use more than one slave select pin, not just the `SS` pin. This is usefu
 
 You'll need to determine which pins can be used for SPI -- as an example, STM32 parts generally have multiple SPI peripherals, labeled SPI1, SPI2, SPI3 etc.
 
-To enable SPI, modify your board's `halconf.h` to enable SPI:
+To enable SPI, modify your board's `halconf.h` to enable SPI, then modify your board's `mcuconf.h` to enable the peripheral you've chosen:
 
-```c
-#define HAL_USE_SPI TRUE
-#define SPI_USE_WAIT TRUE
-#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+::: code-group
+```c [halconf.h]
+#pragma once
+
+#define HAL_USE_SPI TRUE // [!code focus]
+#define SPI_USE_WAIT TRUE // [!code focus]
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD // [!code focus]
+
+#include_next <halconf.h>
 ```
+```c [mcuconf.h]
+#pragma once
 
-Then, modify your board's `mcuconf.h` to enable the peripheral you've chosen, for example:
+#include_next <mcuconf.h>
 
-```c
-#undef STM32_SPI_USE_SPI2
-#define STM32_SPI_USE_SPI2 TRUE
+#undef STM32_SPI_USE_SPI2 // [!code focus]
+#define STM32_SPI_USE_SPI2 TRUE // [!code focus]
 ```
+:::
 
 Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303.
 

docs/drivers/uart.md

@@ -35,8 +35,12 @@ You'll need to determine which pins can be used for UART -- as an example, STM32
 To enable UART, modify your board's `mcuconf.h` to enable the peripheral you've chosen, for example:
 
 ```c
-#undef STM32_SERIAL_USE_USART2
-#define STM32_SERIAL_USE_USART2 TRUE
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_SERIAL_USE_USART2 // [!code focus]
+#define STM32_SERIAL_USE_USART2 TRUE // [!code focus]
 ```
 
 Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303.

docs/drivers/ws2812.md

@@ -160,15 +160,23 @@ To configure the DI pin for open drain configuration, add the following to your
 
 Depending on the ChibiOS board configuration, you may need to enable SPI at the keyboard level. For STM32, this would look like:
 
-`halconf.h`:
-```c
-#define HAL_USE_SPI TRUE
+::: code-group
+```c [halconf.h]
+#pragma once
+
+#define HAL_USE_SPI TRUE // [!code focus]
+
+#include_next <halconf.h>
 ```
-`mcuconf.h`:
-```c
-#undef STM32_SPI_USE_SPI1
-#define STM32_SPI_USE_SPI1 TRUE
+```c [mcuconf.h]
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_SPI_USE_SPI1 // [!code focus]
+#define STM32_SPI_USE_SPI1 TRUE // [!code focus]
 ```
+:::
 
 The following `define`s apply only to the `spi` driver:
 
@@ -213,15 +221,23 @@ The following `#define`s apply only to the PIO driver:
 
 Depending on the ChibiOS board configuration, you may need to enable PWM at the keyboard level. For STM32, this would look like:
 
-`halconf.h`:
-```c
-#define HAL_USE_PWM TRUE
+::: code-group
+```c [halconf.h]
+#pragma once
+
+#define HAL_USE_PWM TRUE // [!code focus]
+
+#include_next <halconf.h>
 ```
-`mcuconf.h`:
-```c
-#undef STM32_PWM_USE_TIM2
-#define STM32_PWM_USE_TIM2 TRUE
+```c [mcuconf.h]
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_PWM_USE_TIM2 // [!code focus]
+#define STM32_PWM_USE_TIM2 TRUE // [!code focus]
 ```
+:::
 
 The following `#define`s apply only to the `pwm` driver:
 
@@ -236,18 +252,49 @@ The following `#define`s apply only to the `pwm` driver:
 |`WS2812_PWM_COMPLEMENTARY_OUTPUT`|*Not defined*       |Whether the PWM output is complementary (`TIMx_CHyN`)                                     |
 
 ::: tip
-Using a complementary timer output (`TIMx_CHyN`) is possible only for advanced-control timers (1, 8 and 20 on STM32), and the `STM32_PWM_USE_ADVANCED` option in `mcuconf.h` must be set to `TRUE`. Complementary outputs of general-purpose timers are not supported due to ChibiOS limitations.
+Using a complementary timer output (`TIMx_CHyN`) is possible only for advanced-control timers (1, 8 and 20 on STM32). Complementary outputs of general-purpose timers are not supported due to ChibiOS limitations.
 :::
 
 ## API {#api}
 
-### `void ws2812_setleds(rgb_led_t *ledarray, uint16_t number_of_leds)` {#api-ws2812-setleds}
+### `void ws2812_init(void)` {#api-ws2812-init}
 
-Send RGB data to the WS2812 LED chain.
+Initialize the LED driver. This function should be called first.
 
-#### Arguments {#api-ws2812-setleds-arguments}
+---
 
- - `rgb_led_t *ledarray`  
-   A pointer to the LED array.
- - `uint16_t number_of_leds`  
-   The length of the LED array.
+### `void ws2812_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-ws2812-set-color}
+
+Set the color of a single LED. This function does not immediately update the LEDs; call `ws2812_flush()` after you are finished.
+
+#### Arguments {#api-ws2812-set-color-arguments}
+
+ - `int index`  
+   The LED index in the WS2812 chain.
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void ws812_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-ws2812-set-color-all}
+
+Set the color of all LEDs.
+
+#### Arguments {#api-ws2812-set-color-all-arguments}
+
+ - `uint8_t red`  
+   The red value to set.
+ - `uint8_t green`  
+   The green value to set.
+ - `uint8_t blue`  
+   The blue value to set.
+
+---
+
+### `void ws2812_flush(void)` {#api-ws2812-flush}
+
+Flush the PWM values to the LED chain.

docs/faq_debug.md

@@ -129,7 +129,7 @@ needed for older distros.
 ## Can't Get Message on Console
 Check:
 - *hid_listen* finds your device. See above.
-- Enable debug by pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
+- Enable debug by pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard/wiki#magic-commands-for-debug).
 - Set `debug_enable=true`. See [Debugging](#debugging)
 - Try using `print` function instead of debug print. See **common/print.h**.
 - Disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).

docs/faq_general.md

@@ -40,7 +40,7 @@ That's amazing! We would love to assist you with that!
 
 In fact, we have a [whole page](https://qmk.fm/powered/) dedicated to adding QMK Branding to your page and keyboard. This covers pretty much everything you need (knowledge and images) to officially support QMK.
 
-If you have any questions about this, open an issue or head to [Discord](https://discord.gg/Uq7gcHh).
+If you have any questions about this, open an issue or head to [Discord](https://discord.gg/qmk).
 
 ## What Differences Are There Between QMK and TMK?
 

docs/faq_keymap.md

@@ -34,7 +34,7 @@ On first run, the VIA code in the firmware will copy the keymap from flash memor
 
 The simple fix for this is to clear the EEPROM. You can do this in several ways:
 
-* Hold the Bootmagic Lite key (usually top left/Escape) while plugging the board in, which will also place the board into bootloader mode; then unplug and replug the board.
+* Hold the Bootmagic key (usually top left/Escape) while plugging the board in, which will also place the board into bootloader mode; then unplug and replug the board.
 * Press the `QK_CLEAR_EEPROM`/`EE_CLR` keycode if it is accessible on your keymap.
 * Place the board into bootloader mode and hit the "Clear EEPROM" button. This may not be available for all bootloaders, and you may need to reflash the board afterwards.
 

docs/feature_advanced_keycodes.md

@@ -11,7 +11,7 @@ These allow you to combine a modifier with a keycode. When pressed, the keydown
 |`RCTL(kc)`|                                  |Hold Right Control and press `kc`                     |
 |`RSFT(kc)`|                                  |Hold Right Shift and press `kc`                       |
 |`RALT(kc)`|`ROPT(kc)`, `ALGR(kc)`            |Hold Right Alt and press `kc`                         |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`            |Hold Right GUI and press `kc`                         |
+|`RGUI(kc)`|`RCMD(kc)`, `RWIN(kc)`            |Hold Right GUI and press `kc`                         |
 |`LSG(kc)` |`SGUI(kc)`, `SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`                |
 |`LAG(kc)` |                                  |Hold Left Alt and Left GUI and press `kc`             |
 |`RSG(kc)` |                                  |Hold Right Shift and Right GUI and press `kc`         |

docs/feature_converters.md

@@ -10,7 +10,7 @@ The following converters are available at this time:
 |------------|-------------------|
 | `promicro` | `proton_c`        |
 | `promicro` | `kb2040`          |
-| `promicro` | `promicro_rp2040` |
+| `promicro` | `sparkfun_pm2040` |
 | `promicro` | `blok`            |
 | `promicro` | `bit_c_pro`       |
 | `promicro` | `stemcell`        |
@@ -21,6 +21,7 @@ The following converters are available at this time:
 | `promicro` | `liatris`         |
 | `promicro` | `imera`           |
 | `promicro` | `michi`           |
+| `promicro` | `svlinky`         |
 | `elite_c`  | `stemcell`        |
 | `elite_c`  | `rp2040_ce`       |
 | `elite_c`  | `elite_pi`        |
@@ -77,7 +78,7 @@ If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.co
 |------------------------------------------------------------------------------------------|-------------------|
 | [Proton C](https://qmk.fm/proton-c/)                                                     | `proton_c`        |
 | [Adafruit KB2040](https://learn.adafruit.com/adafruit-kb2040)                            | `kb2040`          |
-| [SparkFun Pro Micro - RP2040](https://www.sparkfun.com/products/18288)                   | `promicro_rp2040` |
+| [SparkFun Pro Micro - RP2040](https://www.sparkfun.com/products/18288)                   | `sparkfun_pm2040` |
 | [Blok](https://boardsource.xyz/store/628b95b494dfa308a6581622)                           | `blok`            |
 | [Bit-C PRO](https://nullbits.co/bit-c-pro)                                               | `bit_c_pro`       |
 | [STeMCell](https://github.com/megamind4089/STeMCell)                                     | `stemcell`        |
@@ -87,6 +88,7 @@ If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.co
 | [Liatris](https://splitkb.com/products/liatris)                                          | `liatris`         |
 | [Imera](https://splitkb.com/products/imera)                                              | `imera`           |
 | [Michi](https://github.com/ci-bus/michi-promicro-rp2040)                                 | `michi`           |
+| [Svlinky](https://github.com/sadekbaroudi/svlinky)                                       | `svlinky`         |
 
 Converter summary:
 
@@ -94,7 +96,7 @@ Converter summary:
 |-------------------|---------------------------------|------------------------------|-------------------------------------|
 | `proton_c`        | `-e CONVERT_TO=proton_c`        | `CONVERT_TO=proton_c`        | `#ifdef CONVERT_TO_PROTON_C`        |
 | `kb2040`          | `-e CONVERT_TO=kb2040`          | `CONVERT_TO=kb2040`          | `#ifdef CONVERT_TO_KB2040`          |
-| `promicro_rp2040` | `-e CONVERT_TO=promicro_rp2040` | `CONVERT_TO=promicro_rp2040` | `#ifdef CONVERT_TO_PROMICRO_RP2040` |
+| `sparkfun_pm2040` | `-e CONVERT_TO=sparkfun_pm2040` | `CONVERT_TO=sparkfun_pm2040` | `#ifdef CONVERT_TO_SPARKFUN_PM2040` |
 | `blok`            | `-e CONVERT_TO=blok`            | `CONVERT_TO=blok`            | `#ifdef CONVERT_TO_BLOK`            |
 | `bit_c_pro`       | `-e CONVERT_TO=bit_c_pro`       | `CONVERT_TO=bit_c_pro`       | `#ifdef CONVERT_TO_BIT_C_PRO`       |
 | `stemcell`        | `-e CONVERT_TO=stemcell`        | `CONVERT_TO=stemcell`        | `#ifdef CONVERT_TO_STEMCELL`        |
@@ -105,6 +107,7 @@ Converter summary:
 | `liatris`         | `-e CONVERT_TO=liatris`         | `CONVERT_TO=liatris`         | `#ifdef CONVERT_TO_LIATRIS`         |
 | `imera`           | `-e CONVERT_TO=imera`           | `CONVERT_TO=imera`           | `#ifdef CONVERT_TO_IMERA`           |
 | `michi`           | `-e CONVERT_TO=michi`           | `CONVERT_TO=michi`           | `#ifdef CONVERT_TO_MICHI`           |
+| `svlinky`         | `-e CONVERT_TO=svlinky`         | `CONVERT_TO=svlinky`         | `#ifdef CONVERT_TO_SVLINKY`         |
 
 ### Proton C {#proton_c}
 
@@ -135,7 +138,7 @@ The following defaults are based on what has been implemented for [RP2040](platf
 | USB Host (e.g. USB-USB converter)            | Not supported (USB host code is AVR specific and is not currently supported on ARM)                              |
 | [Split keyboards](features/split_keyboard) | Partial via `PIO` vendor driver - heavily dependent on enabled features                                          |
 
-### SparkFun Pro Micro - RP2040, Blok, Bit-C PRO and Michi {#promicro_rp2040 }
+### SparkFun Pro Micro - RP2040, Blok, Bit-C PRO and Michi {#sparkfun_pm2040 }
 
 Feature set is identical to [Adafruit KB2040](#kb2040).
 
@@ -170,6 +173,9 @@ The Bonsai C4 only has one on-board LED (B2), and by default, both the Pro Micro
 
 Feature set is identical to [Adafruit KB2040](#kb2040). VBUS detection is enabled by default for superior split keyboard support. For more information, refer to the [Community Edition pinout](platformdev_rp2040#rp2040_ce) docs.
 
+### Svlinky {#svlinky}
+
+Feature set is a pro micro equivalent of the [RP2040 Community Edition](#rp2040_ce), except that two of the analog GPIO have been replaced with digital only GPIO. These two were moved to the FPC connector to support the [VIK specification](https://github.com/sadekbaroudi/vik). This means that if you are expecting analog support on all 4 pins as provided on a RP2040 Community Edition pinout, you will not have that. Please see the [Svlinky github page](https://github.com/sadekbaroudi/svlinky) for more details.
 
 ## Elite-C
 

docs/feature_eeprom.md

@@ -109,7 +109,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
 }
 ```
-And lastly, you want to add the `eeconfig_init_user` function, so that when the EEPROM is reset, you can specify default values, and even custom actions. To force an EEPROM reset, use the `EE_CLR` keycode or [Bootmagic Lite](features/bootmagic) functionallity. For example, if you want to set rgb layer indication by default, and save the default valued.
+And lastly, you want to add the `eeconfig_init_user` function, so that when the EEPROM is reset, you can specify default values, and even custom actions. To force an EEPROM reset, use the `EE_CLR` keycode or [Bootmagic](features/bootmagic) functionallity. For example, if you want to set rgb layer indication by default, and save the default valued.
 
 ```c
 void eeconfig_init_user(void) {  // EEPROM is getting reset!

docs/feature_layers.md

@@ -8,7 +8,8 @@ For a detailed explanation of how the layer stack works, checkout [Keymap Overvi
 
 These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
 
-* `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions#programming-the-behavior-of-any-keycode).)
+* `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. Note that this is a temporary switch that only persists until the keyboard loses power.
+* `PDF(layer)` - sets a persistent default layer. This switch, which will last through a power loss, might be used to switch from QWERTY to Dvorak layout and only switch again when you want to.
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated.
 * `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15. The modifiers this keycode accept are prefixed with `MOD_`, not `KC_`. These modifiers can be combined using bitwise OR, e.g. `LM(_RAISE, MOD_LCTL | MOD_LALT)`.
 * `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
@@ -17,6 +18,9 @@ These functions allow you to activate layers in various ways. Note that layers a
 * `TO(layer)` - activates *layer* and de-activates all other layers (except your default layer). This function is special, because instead of just adding/removing one layer to your active layer stack, it will completely replace your current active layers, uniquely allowing you to replace higher layers with a lower one. This is activated on keydown (as soon as the key is pressed).
 * `TT(layer)` - Layer Tap-Toggle. If you hold the key down, *layer* is activated, and then is de-activated when you let go (like `MO`). If you repeatedly tap it, the layer will be toggled on or off (like `TG`). It needs 5 taps by default, but you can change this by defining `TAPPING_TOGGLE` -- for example, `#define TAPPING_TOGGLE 2` to toggle on just two taps.
 
+See also the [Layer Lock key](features/layer_lock), which locks the highest
+active layer until pressed again.
+
 ### Caveats {#caveats}
 
 Currently, the `layer` argument of `LT()` is limited to layers 0-15, and the `kc` argument to the [Basic Keycode set](keycodes_basic), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. This is because QMK uses 16-bit keycodes, of which 4 bits are used for the function identifier and 4 bits for the layer, leaving only 8 bits for the keycode.
@@ -74,6 +78,7 @@ There are a number of functions (and variables) related to how you can use or ma
 | `default_layer_and(layer_mask)`              | Turns on layers based on matching enabled bits between specifed layer and existing default layer state. |
 | `default_layer_xor(layer_mask)`              | Turns on layers based on non-matching bits between specifed layer and existing default layer state.     |
 | `default_layer_debug(layer_mask)`            | Prints out the current bit mask and highest active default layer to debugger console.                   |
+| [`set_single_default_layer(layer)`](ref_functions.md#setting-the-persistent-default-layer)            | Sets the default layer, but does _not_ write it to persistent memory (EEPROM). | 
 | [`set_single_persistent_default_layer(layer)`](ref_functions.md#setting-the-persistent-default-layer) | Sets the default layer and writes it to persistent memory (EEPROM).  |
 | [`update_tri_layer(x, y, z)`](ref_functions.md#update_tri_layerx-y-z) | Checks if layers `x` and `y` are both on, and sets `z` based on that (on if both on, otherwise off). |
 | [`update_tri_layer_state(state, x, y, z)`](ref_functions.md#update_tri_layer_statestate-x-y-z) | Does the same as `update_tri_layer(x, y, z)`, but from `layer_state_set_*` functions. |

docs/feature_macros.md

@@ -42,38 +42,7 @@ You can define up to 32 macros in a `keymap.json` file, as used by [Configurator
 
 ### Selecting Your Host Keyboard Layout
 
-If you type in a language other than English, or use a non-QWERTY layout like Colemak, Dvorak, or Workman, you may have set your computer's input language to match this layout. This presents a challenge when creating macros - you may need to type different keys to get the same letters! To address this you can add the `host_language` key to your `keymap.json`, like so:
-
-```json
-{
-    "keyboard": "handwired/my_macropad",
-    "keymap": "my_keymap",
-    "host_language": "dvorak",
-    "macros": [
-        ["Hello, World!"]
-    ],
-    "layout": "LAYOUT_all",
-    "layers": [
-        ["QK_MACRO_0"]
-    ]
-}
-```
-
-The current list of available languages is:
-
-| belgian | bepo | br_abnt2 | canadian_multilingual |
-|:-------:|:----:|:--------:|:---------------------:|
-| **colemak** | **croatian** | **czech** | **danish** |
-| **dvorak_fr** | **dvorak** | **dvp** | **estonian** |
-| **finnish** | **fr_ch** | **french_afnor** | **french** |
-| **french_osx** | **german_ch** | **german** | **german_osx** |
-| **hungarian** | **icelandic** | **italian** | **italian_osx_ansi** |
-| **italian_osx_iso** | **jis** | **latvian** | **lithuanian_azerty** |
-| **lithuanian_qwerty** | **norman** | **norwegian** | **portuguese** |
-| **portuguese_osx_iso** | **romanian** | **serbian_latin** | **slovak** |
-| **slovenian** | **spanish_dvorak** | **spanish_latin_america** | **spanish** |
-| **swedish** | **turkish_f** | **turkish_q** | **uk** |
-| **us_international** | **workman** | **workman_zxcvm** |
+If you type in a language other than English, or use a non-QWERTY layout like Colemak, Dvorak, or Workman, you may have set your computer's input language to match this layout. This presents a challenge when creating macros — you may need to type different keys to get the same letters! To address this you can use [language-specific keycodes](reference_keymap_extras).
 
 ### Macro Basics
 

docs/features/backlight.md

@@ -161,15 +161,23 @@ Note that the choice of timer may conflict with the [Audio](audio) feature.
 
 Depending on the ChibiOS board configuration, you may need to enable PWM at the keyboard level. For STM32, this would look like:
 
-`halconf.h`:
-```c
-#define HAL_USE_PWM TRUE
+::: code-group
+```c [halconf.h]
+#pragma once
+
+#define HAL_USE_PWM TRUE // [!code focus]
+
+#include_next <halconf.h>
 ```
-`mcuconf.h`:
-```c
-#undef STM32_PWM_USE_TIM4
-#define STM32_PWM_USE_TIM4 TRUE
+```c [mcuconf.h]
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_PWM_USE_TIM4 // [!code focus]
+#define STM32_PWM_USE_TIM4 TRUE // [!code focus]
 ```
+:::
 
 The following `#define`s apply only to the `pwm` driver:
 
@@ -187,15 +195,23 @@ Refer to the ST datasheet for your particular MCU to determine these values. For
 
 Depending on the ChibiOS board configuration, you may need to enable general-purpose timers at the keyboard level. For STM32, this would look like:
 
-`halconf.h`:
-```c
-#define HAL_USE_GPT TRUE
+::: code-group
+```c [halconf.h]
+#pragma once
+
+#define HAL_USE_GPT TRUE // [!code focus]
+
+#include_next <halconf.h>
 ```
-`mcuconf.h`:
-```c
-#undef STM32_GPT_USE_TIM15
-#define STM32_GPT_USE_TIM15 TRUE
+```c [mcuconf.h]
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_GPT_USE_TIM15 // [!code focus]
+#define STM32_GPT_USE_TIM15 TRUE // [!code focus]
 ```
+:::
 
 The following `#define`s apply only to the `timer` driver:
 

docs/features/bluetooth.md

@@ -1,46 +0,0 @@
-# Bluetooth
-
-## Bluetooth Known Supported Hardware
-
-Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1, QMK has support for RN-42 modules. For more recent BLE protocols, currently only the Adafruit Bluefruit SPI Friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support mouse input.
-
-|Board                                                           |Bluetooth Protocol  |Connection Type|rules.mk                         |Bluetooth Chip|
-|----------------------------------------------------------------|--------------------|---------------|---------------------------------|--------------|
-|Roving Networks RN-42 (Sparkfun Bluesmirf)                      |Bluetooth Classic   |UART           |`BLUETOOTH_DRIVER = rn42`        |RN-42         |
-|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy|SPI            |`BLUETOOTH_DRIVER = bluefruit_le`|nRF51822      |
-
-Not Supported Yet but possible:
-* [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514)
-* HC-05 boards flashed with RN-42 firmware. They apparently both use the CSR BC417 Chip. Flashing it with RN-42 firmware gives it HID capability.
-* Sparkfun Bluetooth Mate
-* HM-13 based boards
-
-### Adafruit BLE SPI Friend
-Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF51822 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines:
-* `#define BLUEFRUIT_LE_RST_PIN D4`
-* `#define BLUEFRUIT_LE_CS_PIN  B4`
-* `#define BLUEFRUIT_LE_IRQ_PIN E6`
-
-A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip.
-
-<!-- FIXME: Document bluetooth support more completely. -->
-## Bluetooth Rules.mk Options
-
-The currently supported Bluetooth chipsets do not support [N-Key Rollover (NKRO)](../reference_glossary#n-key-rollover-nkro), so `rules.mk` must contain `NKRO_ENABLE = no`.
-
-Add the following to your `rules.mk`:
-
-```make
-BLUETOOTH_ENABLE = yes
-BLUETOOTH_DRIVER = bluefruit_le # or rn42
-```
-
-## Bluetooth Keycodes
-
-This is used when multiple keyboard outputs can be selected. Currently this only allows for switching between USB and Bluetooth on keyboards that support both.
-
-|Key                  |Aliases  |Description                                   |
-|---------------------|---------|----------------------------------------------|
-|`QK_OUTPUT_AUTO`     |`OU_AUTO`|Automatically switch between USB and Bluetooth|
-|`QK_OUTPUT_USB`      |`OU_USB` |USB only                                      |
-|`QK_OUTPUT_BLUETOOTH`|`OU_BT`  |Bluetooth only                                |

docs/features/combo.md

@@ -152,14 +152,15 @@ In order to use these features, the following configuration options and function
 
 | Config Flag                 | Function                                                  | Description                                                                                            |
 |-----------------------------|-----------------------------------------------------------|--------------------------------------------------------------------------------------------------------|
-| `COMBO_TERM_PER_COMBO`      | uint16_t get_combo_term(uint16_t index, combo_t \*combo)  | Optional per-combo timeout window. (default: `COMBO_TERM`)                                             |
-| `COMBO_MUST_HOLD_PER_COMBO` | bool get_combo_must_hold(uint16_t index, combo_t \*combo) | Controls if a given combo should fire immediately on tap or if it needs to be held. (default: `false`) |
-| `COMBO_MUST_TAP_PER_COMBO`  | bool get_combo_must_tap(uint16_t index, combo_t \*combo)  | Controls if a given combo should fire only if tapped within `COMBO_HOLD_TERM`. (default: `false`)      |
-| `COMBO_MUST_PRESS_IN_ORDER_PER_COMBO` | bool get_combo_must_press_in_order(uint16_t index, combo_t \*combo) | Controls if a given combo should fire only if its keys are pressed in order. (default: `true`) |
+| `COMBO_TERM_PER_COMBO`      | `uint16_t get_combo_term(uint16_t combo_index, combo_t *combo)`  | Optional per-combo timeout window. (default: `COMBO_TERM`)                                             |
+| `COMBO_MUST_HOLD_PER_COMBO` | `bool get_combo_must_hold(uint16_t combo_index, combo_t *combo)` | Controls if a given combo should fire immediately on tap or if it needs to be held. (default: `false`) |
+| `COMBO_MUST_TAP_PER_COMBO`  | `bool get_combo_must_tap(uint16_t combo_index, combo_t *combo)`  | Controls if a given combo should fire only if tapped within `COMBO_HOLD_TERM`. (default: `false`)      |
+| `COMBO_MUST_PRESS_IN_ORDER_PER_COMBO` | `bool get_combo_must_press_in_order(uint16_t combo_index, combo_t *combo)` | Controls if a given combo should fire only if its keys are pressed in order. (default: `true`) |
 
 Examples:
 ```c
-uint16_t get_combo_term(uint16_t index, combo_t *combo) {
+#ifdef COMBO_TERM_PER_COMBO
+uint16_t get_combo_term(uint16_t combo_index, combo_t *combo) {
     // decide by combo->keycode
     switch (combo->keycode) {
         case KC_X:
@@ -167,7 +168,7 @@ uint16_t get_combo_term(uint16_t index, combo_t *combo) {
     }
 
     // or with combo index, i.e. its name from enum.
-    switch (index) {
+    switch (combo_index) {
         case COMBO_NAME_HERE:
             return 9001;
     }
@@ -182,8 +183,10 @@ uint16_t get_combo_term(uint16_t index, combo_t *combo) {
 
     return COMBO_TERM;
 }
+#endif
 
-bool get_combo_must_hold(uint16_t index, combo_t *combo) {
+#ifdef COMBO_MUST_HOLD_PER_COMBO
+bool get_combo_must_hold(uint16_t combo_index, combo_t *combo) {
     // Same as above, decide by keycode, the combo index, or by the keys in the chord.
 
     if (KEYCODE_IS_MOD(combo->keycode) || 
@@ -192,15 +195,17 @@ bool get_combo_must_hold(uint16_t index, combo_t *combo) {
         return true;
     }
 
-    switch (index) {
+    switch (combo_index) {
         case COMBO_NAME_HERE:
             return true;
     }
 
     return false;
 }
+#endif
 
-bool get_combo_must_tap(uint16_t index, combo_t *combo) {
+#ifdef COMBO_MUST_TAP_PER_COMBO
+bool get_combo_must_tap(uint16_t combo_index, combo_t *combo) {
     // If you want all combos to be tap-only, just uncomment the next line
     // return true
 
@@ -219,7 +224,9 @@ bool get_combo_must_tap(uint16_t index, combo_t *combo) {
     return false;
 
 }
+#endif
 
+#ifdef COMBO_MUST_PRESS_IN_ORDER_PER_COMBO
 bool get_combo_must_press_in_order(uint16_t combo_index, combo_t *combo) {
     switch (combo_index) {
         /* List combos here that you want to only activate if their keys
@@ -231,6 +238,7 @@ bool get_combo_must_press_in_order(uint16_t combo_index, combo_t *combo) {
             return false;
     }
 }
+#endif
 ```
 
 ### Generic hook to (dis)allow a combo activation
@@ -307,6 +315,50 @@ bool process_combo_key_release(uint16_t combo_index, combo_t *combo, uint8_t key
     return false;
 }
 ```
+
+### Customizable key repress
+By defining `COMBO_PROCESS_KEY_REPRESS` and implementing `bool process_combo_key_repress(uint16_t combo_index, combo_t *combo, uint8_t key_index, uint16_t keycode)` you can run your custom code when you repress just released key of a combo. By combining it with custom `process_combo_event` we can for example make special handling for Alt+Tab to switch windows, which, on combo F+G activation, registers Alt and presses Tab - then we can switch windows forward by releasing G and pressing it again, or backwards with F key. Here's the full example:
+
+```c
+enum combos {
+    CMB_ALTTAB
+};
+
+const uint16_t PROGMEM combo_alttab[] = {KC_F, KC_G, COMBO_END};
+
+combo_t key_combos[COMBO_LENGTH] = {
+    [CMB_ALTTAB] = COMBO(combo_alttab, KC_NO), // KC_NO to leave processing for process_combo_event
+};
+
+void process_combo_event(uint16_t combo_index, bool pressed) {
+    switch (combo_index) {
+        case CMB_ALTTAB:
+            if (pressed) {
+                register_mods(MOD_LALT);
+                tap_code(KC_TAB);
+            } else {
+                unregister_mods(MOD_LALT);
+            }
+            break;
+    }
+}
+
+bool process_combo_key_repress(uint16_t combo_index, combo_t *combo, uint8_t key_index, uint16_t keycode) {
+    switch (combo_index) {
+        case CMB_ALTTAB:
+            switch (keycode) {
+                case KC_F:
+                    tap_code16(S(KC_TAB));
+                    return true;
+                case KC_G:
+                    tap_code(KC_TAB);
+                    return true;
+            }
+    }
+    return false;
+}
+```
+
 ### Layer independent combos
 
 If you, for example, use multiple base layers for different key layouts, one for QWERTY, and another one for Colemak, you might want your combos to work from the same key positions on all layers. Defining the same combos again for another layout is redundant and takes more memory. The solution is to just check the keycodes from one layer.

docs/features/command.md

@@ -1,6 +1,6 @@
 # Command
 
-Command, formerly known as Magic, is a way to change your keyboard's behavior without having to flash or unplug it to use [Bootmagic Lite](bootmagic). There is a lot of overlap between this functionality and the [Magic Keycodes](../keycodes_magic). Wherever possible we encourage you to use that feature instead of Command.
+Command, formerly known as Magic, is a way to change your keyboard's behavior without having to flash or unplug it to use [Bootmagic](bootmagic). There is a lot of overlap between this functionality and the [Magic Keycodes](../keycodes_magic). Wherever possible we encourage you to use that feature instead of Command.
 
 On some keyboards Command is disabled by default. If this is the case, it must be explicitly enabled in your `rules.mk`:
 

docs/features/encoders.md

@@ -9,15 +9,15 @@ ENCODER_ENABLE = yes
 and this to your `config.h`:
 
 ```c
-#define ENCODERS_PAD_A { B12 }
-#define ENCODERS_PAD_B { B13 }
+#define ENCODER_A_PINS { B12 }
+#define ENCODER_B_PINS { B13 }
 ```
 
 Each PAD_A/B variable defines an array so multiple encoders can be defined, e.g.:
 
 ```c
-#define ENCODERS_PAD_A { encoder1a, encoder2a }
-#define ENCODERS_PAD_B { encoder1b, encoder2b }
+#define ENCODER_A_PINS { encoder1a, encoder2a }
+#define ENCODER_B_PINS { encoder1b, encoder2b }
 ```
 
 If your encoder's clockwise directions are incorrect, you can swap the A & B pad definitions.  They can also be flipped with a define:
@@ -49,8 +49,8 @@ For 4× encoders you also can assign default position if encoder skips pulses wh
 If you are using different pinouts for the encoders on each half of a split keyboard, you can define the pinout (and optionally, resolutions) for the right half like this:
 
 ```c
-#define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a }
-#define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b }
+#define ENCODER_A_PINS_RIGHT { encoder1a, encoder2a }
+#define ENCODER_B_PINS_RIGHT { encoder1b, encoder2b }
 #define ENCODER_RESOLUTIONS_RIGHT { 2, 4 }
 ```
 
@@ -59,11 +59,11 @@ If the `_RIGHT` definitions aren't specified in your `config.h`, then the non-`_
 Additionally, if one side does not have an encoder, you can specify `{}` for the pins/resolution -- for example, a split keyboard with only a right-side encoder:
 
 ```c
-#define ENCODERS_PAD_A { }
-#define ENCODERS_PAD_B { }
+#define ENCODER_A_PINS { }
+#define ENCODER_B_PINS { }
 #define ENCODER_RESOLUTIONS { }
-#define ENCODERS_PAD_A_RIGHT { B12 }
-#define ENCODERS_PAD_B_RIGHT { B13 }
+#define ENCODER_A_PINS_RIGHT { B12 }
+#define ENCODER_B_PINS_RIGHT { B13 }
 #define ENCODER_RESOLUTIONS_RIGHT { 4 }
 ```
 
@@ -84,10 +84,10 @@ Your `keymap.c` will then need an encoder mapping defined (for four layers and t
 ```c
 #if defined(ENCODER_MAP_ENABLE)
 const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
-    [0] = { ENCODER_CCW_CW(KC_MS_WH_UP, KC_MS_WH_DOWN), ENCODER_CCW_CW(KC_VOLD, KC_VOLU)  },
-    [1] = { ENCODER_CCW_CW(RGB_HUD, RGB_HUI),           ENCODER_CCW_CW(RGB_SAD, RGB_SAI)  },
-    [2] = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI),           ENCODER_CCW_CW(RGB_SPD, RGB_SPI)  },
-    [3] = { ENCODER_CCW_CW(RGB_RMOD, RGB_MOD),          ENCODER_CCW_CW(KC_RIGHT, KC_LEFT) },
+    [0] = { ENCODER_CCW_CW(MS_WHLU, MS_WHLD),  ENCODER_CCW_CW(KC_VOLD, KC_VOLU)  },
+    [1] = { ENCODER_CCW_CW(UG_HUED, UG_HUEU),  ENCODER_CCW_CW(UG_SATD, UG_SATU)  },
+    [2] = { ENCODER_CCW_CW(UG_VALD, UG_VALU),  ENCODER_CCW_CW(UG_SPDD, UG_SPDU)  },
+    [3] = { ENCODER_CCW_CW(UG_PREV, UG_NEXT),  ENCODER_CCW_CW(KC_RIGHT, KC_LEFT) },
 };
 #endif
 ```
@@ -174,13 +174,13 @@ Multiple encoders may share pins so long as each encoder has a distinct pair of
 
 For example you can support two encoders using only 3 pins like this
 ```
-#define ENCODERS_PAD_A { B1, B1 }
-#define ENCODERS_PAD_B { B2, B3 }
+#define ENCODER_A_PINS { B1, B1 }
+#define ENCODER_B_PINS { B2, B3 }
 ```
 
 You could even support three encoders using only three pins (one per encoder) however in this configuration, rotating two encoders which share pins simultaneously will often generate incorrect output. For example:
 ```
-#define ENCODERS_PAD_A { B1, B1, B2 }
-#define ENCODERS_PAD_B { B2, B3, B3 }
+#define ENCODER_A_PINS { B1, B1, B2 }
+#define ENCODER_B_PINS { B2, B3, B3 }
 ```
 Here rotating Encoder 0 `B1 B2` and Encoder 1 `B1 B3` could be interpreted as rotating Encoder 2 `B2 B3` or `B3 B2` depending on the timing. This may still be a useful configuration depending on your use case

docs/features/joystick.md

@@ -1,6 +1,6 @@
 # Joystick {#joystick}
 
-This feature provides game controller input as a joystick device supporting up to 6 axes and 32 buttons. Axes can be read either from an [ADC-capable input pin](../drivers/adc), or can be virtual, so that its value is provided by your code.
+This feature provides game controller input as a joystick device supporting up to 6 axes, 32 buttons and a hat switch. Axes can be read either from an [ADC-capable input pin](../drivers/adc), or can be virtual, so that its value is provided by your code.
 
 An analog device such as a [potentiometer](https://en.wikipedia.org/wiki/Potentiometer) found on an analog joystick's axes is based on a voltage divider, where adjusting the movable wiper controls the output voltage which can then be read by the microcontroller's ADC.
 
@@ -18,6 +18,8 @@ By default the joystick driver is `analog`, but you can change this with:
 JOYSTICK_DRIVER = digital
 ```
 
+When using `analog` with ARM, [you must use 3.3v with your Joystick](../drivers/adc). Although ARM boards such as the [Helios](https://keeb.supply/products/0xcb-helios) have 5v pin output, the ADC driver does not support it.
+
 ## Configuration {#configuration}
 
 By default, two axes and eight buttons are defined, with a reported resolution of 8 bits (-127 to +127). This can be changed in your `config.h`:
@@ -35,6 +37,42 @@ By default, two axes and eight buttons are defined, with a reported resolution o
 You must define at least one button or axis. Also note that the maximum ADC resolution of the supported AVR MCUs is 10-bit, and 12-bit for most STM32 MCUs.
 :::
 
+### Hat Switch {#hat-switch}
+
+To enable the 8-way hat switch, add the following to your `config.h`:
+
+```c
+#define JOYSTICK_HAS_HAT
+````
+
+The position can be set by calling `joystick_set_hat(value)`. The range of values moves clockwise from the top (ie. north), with the default "center" position represented by a value of `-1`:
+
+```
+         0
+ 7       N       1
+   NW .--'--. NE
+     /       \
+6 W |   -1    | E 2
+     \       /
+   SW '--.--' SE
+ 5       S       3
+         4
+```
+
+Alternatively you can use these predefined names:
+
+|Define                  |Value|Angle|
+|------------------------|-----|-----|
+|`JOYSTICK_HAT_CENTER`   |`-1` |     |
+|`JOYSTICK_HAT_NORTH`    |`0`  |0°   |
+|`JOYSTICK_HAT_NORTHEAST`|`1`  |45°  |
+|`JOYSTICK_HAT_EAST`     |`2`  |90°  |
+|`JOYSTICK_HAT_SOUTHEAST`|`3`  |135° |
+|`JOYSTICK_HAT_SOUTH`    |`4`  |180° |
+|`JOYSTICK_HAT_SOUTHWEST`|`5`  |225° |
+|`JOYSTICK_HAT_WEST`     |`6`  |270° |
+|`JOYSTICK_HAT_NORTHWEST`|`7`  |315° |
+
 ### Axes {#axes}
 
 When defining axes for your joystick, you must provide a definition array typically in your `keymap.c`.
@@ -147,6 +185,8 @@ Contains the state of the joystick.
    A bit-packed array containing the joystick button states. The size is calculated as `(JOYSTICK_BUTTON_COUNT - 1) / 8 + 1`.
  - `int16_t axes[]`  
    An array of analog values for each defined axis.
+ - `int8_t hat`  
+   The hat switch position.
  - `bool dirty`  
    Whether the current state needs to be sent to the host.
 
@@ -220,3 +260,14 @@ Set the value of the given axis.
    The axis to set the value of.
  - `int16_t value`  
    The value to set.
+
+---
+
+### `void joystick_set_hat(int8_t value)` {#api-joystick-set-hat}
+
+Set the position of the hat switch.
+
+#### Arguments {#api-joystick-set-hat-arguments}
+
+ - `int8_t value`  
+   The hat switch position to set.