Merge pull request #4453 from drashna/fix_ucis

Fix UCIS code

docs/_sidebar.md

@@ -39,6 +39,7 @@
   * [Glossary](reference_glossary.md)
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
+  * [Configurator Support](reference_configurator_support.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)
@@ -79,6 +80,7 @@
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
+  * [I2C Driver](i2c_driver.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/_summary.md

@@ -39,6 +39,7 @@
   * [Glossary](reference_glossary.md)
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
+  * [Configurator Support](reference_configurator_support.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)
@@ -79,6 +80,7 @@
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
+  * [I2C Driver](i2c_driver.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/config_options.md

@@ -261,3 +261,32 @@ Use these to enable or disable building certain features. The more you have enab
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
+
+## USB Endpoint Limitations
+
+In order to provide services over USB, QMK has to use USB endpoints.
+These are a finite resource: each microcontroller has only a certain number.
+This limits what features can be enabled together.
+If the available endpoints are exceeded, a build error is thrown.
+
+The following features can require separate endpoints:
+
+* `MOUSEKEY_ENABLE`
+* `EXTRAKEY_ENABLE`
+* `CONSOLE_ENABLE`
+* `NKRO_ENABLE`
+* `MIDI_ENABLE`
+* `RAW_ENABLE`
+* `VIRTSER_ENABLE`
+
+In order to improve utilisation of the endpoints, the HID features can be combined to use a single endpoint.
+By default, `MOUSEKEY`, `EXTRAKEY`, and `NKRO` are combined into a single endpoint.
+
+The base keyboard functionality can also be combined into the endpoint,
+by setting `KEYBOARD_SHARED_EP = yes`.
+This frees up one more endpoint,
+but it can prevent the keyboard working in some BIOSes,
+as they do not implement Boot Keyboard protocol switching.
+
+Combining the mouse also breaks Boot Mouse compatibility.
+The mouse can be uncombined by setting `MOUSE_SHARED_EP = no` if this functionality is required.

docs/faq_build.md

@@ -126,5 +126,5 @@ For now, you need to rollback avr-gcc to 7 in brew.
 ```
 brew uninstall --force avr-gcc
 brew install avr-gcc@7
-brew link avr-gcc@7
+brew link --force avr-gcc@7
 ```

docs/feature_backlight.md

@@ -54,14 +54,17 @@ In this handler, the value of an incrementing counter is mapped onto a precomput
 
 ## Backlight Functions
 
-|Function  |Description                                               |
-|----------|----------------------------------------------------------|
-|`backlight_toggle()`   |Turn the backlight on or off                 |
-|`backlight_step()`     |Cycle through backlight levels               |
-|`backlight_increase()` |Increase the backlight level                 |
-|`backlight_decrease()` |Decrease the backlight level                 |
-|`backlight_level(x)`   |Sets the backlight level to specified level  |
-|`get_backlight_level()`|Return the current backlight level           |
+|Function  |Description                                                |
+|----------|-----------------------------------------------------------|
+|`backlight_toggle()`    |Turn the backlight on or off                 |
+|`backlight_enable()`    |Turn the backlight on                        |
+|`backlight_disable()`   |Turn the backlight off                       |
+|`backlight_step()`      |Cycle through backlight levels               |
+|`backlight_increase()`  |Increase the backlight level                 |
+|`backlight_decrease()`  |Decrease the backlight level                 |
+|`backlight_level(x)`    |Sets the backlight level to specified level  |
+|`get_backlight_level()` |Return the current backlight level           |
+|`is_backlight_enabled()`|Return whether the backlight is currently on |
 
 ### Backlight Breathing Functions
 

docs/feature_rgb_matrix.md

@@ -150,6 +150,30 @@ These are the effects that are currently available:
 	#endif
 	    RGB_MATRIX_EFFECT_MAX
 	};
+    
+You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`:
+
+
+|Define                                             |Description                                 |
+|---------------------------------------------------|--------------------------------------------|
+|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS`           |Disables `RGB_MATRIX_ALPHAS_MODS`           |
+|`#define DISABLE_RGB_MATRIX_DUAL_BEACON`           |Disables `RGB_MATRIX_DUAL_BEACON`           |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN`      |Disables `RGB_MATRIX_GRADIENT_UP_DOWN`      |
+|`#define DISABLE_RGB_MATRIX_RAINDROPS`             |Disables `RGB_MATRIX_RAINDROPS`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_ALL`             |Disables `RGB_MATRIX_CYCLE_ALL`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`      |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`      |
+|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`         |Disables `RGB_MATRIX_CYCLE_UP_DOWN`         |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`        |Disables `RGB_MATRIX_RAINBOW_BEACON`        |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`     |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`     |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|
+|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`   |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`   |
+|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`          |Disables `RGB_MATRIX_DIGITAL_RAIN`          |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`        |Disables `RGB_MATRIX_SOLID_REACTIVE`        |
+|`#define DISABLE_RGB_MATRIX_SPLASH`                |Disables `RGB_MATRIX_SPLASH`                |
+|`#define DISABLE_RGB_MATRIX_MULTISPLASH`           |Disables `RGB_MATRIX_MULTISPLASH`           |
+|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`          |Disables `RGB_MATRIX_SOLID_SPLASH`          |
+|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH`     |Disables `RGB_MATRIX_SOLID_MULTISPLASH`     |
+
 
 ## Custom layer effects
 

docs/features.md

@@ -8,7 +8,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Auto Shift](feature_auto_shift.md) - Tap for the normal key, hold slightly longer for its shifted state.
 * [Backlight](feature_backlight.md) - LED lighting support for your keyboard.
 * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys.
-* [Combos](feature_combos.md) - Custom actions for multiple key holds.
+* [Combos](feature_combo.md) - Custom actions for multiple key holds.
 * [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic").
 * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
 * [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. 

docs/getting_started_build_tools.md

@@ -57,6 +57,7 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
     brew tap PX4/homebrew-px4
     brew update
     brew install avr-gcc@7
+    brew link --force avr-gcc@7
     brew install dfu-programmer
     brew install dfu-util
     brew install gcc-arm-none-eabi

docs/i2c_driver.md

@@ -0,0 +1,82 @@
+# I2C Master Driver
+
+The I2C Master drivers used in QMK have a set of common functions to allow portability between MCUs.
+
+## Available functions
+
+|Function                                                                                                          |Description                                                                                                                                                                  |
+|------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`void i2c_init(void);`                                                                                            |Initializes the I2C driver. This function should be called once before any transaction is initiated.                                                                         |
+|`uint8_t i2c_start(uint8_t address);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
+|`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
+|`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
+|`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
+|`uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
+|`uint8_t i2c_stop(uint16_t timeout);`                                                                             |Stops the I2C driver.                                                                                                                                                        |
+
+### Function Return
+
+All the above functions, except `void i2c_init(void);` return the following truth table:
+
+|Return Value   |Description                                        |
+|---------------|---------------------------------------------------|
+|0              |Operation executed successfully.                   |
+|-1             |Operation failed.                                  |
+|-2             |Operation timed out.                               |
+
+
+## AVR
+
+### Configuration
+
+The following defines can be used to configure the I2C master driver.
+
+|Variable          |Description                                        |Default|
+|------------------|---------------------------------------------------|-------|
+|`#F_SCL`          |Clock frequency in Hz                              |400KHz |
+|`#Prescaler`      |Divides master clock to aid in I2C clock selection |1      |
+
+AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required.
+
+## ARM
+
+For ARM the Chibios I2C HAL driver is under the hood.
+This section assumes an STM32 MCU.
+
+### Configuration
+
+The configuration for ARM MCUs can be quite complex as often there are multiple I2C drivers which can be assigned to a variety of ports.
+
+Firstly the `mcuconf.h` file must be setup to enable the necessary hardware drivers.
+
+|Variable                      |Description                                                                        |Default|
+|------------------------------|------------------------------------------------------------------------------------|-------|
+|`#STM32_I2C_USE_XXX`          |Enable/Disable the hardware driver XXX (each driver should be explicitly listed)    |FALSE  |
+|`#STM32_I2C_BUSY_TIMEOUT`     |Time in ms until the I2C command is aborted if no response is received              |50     |
+|`#STM32_I2C_XXX_IRQ_PRIORITY` |Interrupt priority for hardware driver XXX (THIS IS AN EXPERT SETTING)              |10     |
+|`#STM32_I2C_USE_DMA`          |Enable/Disable the ability of the MCU to offload the data transfer to the DMA unit  |TRUE   |
+|`#STM32_I2C_XXX_DMA_PRIORITY` |Priority of DMA unit for hardware driver XXX (THIS IS AN EXPERT SETTING)            |1      |
+
+Secondly, in the `halconf.h` file, `#define HAL_USE_I2C` must be set to `TRUE`. This allows ChibiOS to load its I2C driver.
+
+Lastly, we need to assign the correct GPIO pins depending on the I2C hardware driver we want to use.
+
+By default the I2C1 hardware driver is assumed to be used. If another hardware driver is used,  `#define I2C_DRIVER I2CDX` should be added to the `config.h` file with X being the number of hardware driver used. For example is I2C3 is enabled, the `config.h` file should contain `#define I2C_DRIVER I2CD3`. This aligns the QMK I2C driver with the Chibios I2C driver.
+
+STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C.
+
+This can be changed by declaring the `i2c_init` function which intentionally has a weak attribute. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
+
+```C
+void i2c_init(void)
+{
+  setPinInput(B6); // Try releasing special pins for a short time
+  setPinInput(B7);
+  chThdSleepMilliseconds(10); // Wait for the release to happen
+
+  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function
+  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function
+}
+```
+
+

docs/keycodes.md

@@ -141,9 +141,9 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_LOCKING_SCROLL`    |`KC_LSCR`           |Locking Scroll Lock                            |
 |`KC_KP_COMMA`          |`KC_PCMM`           |Keypad `,`                                     |
 |`KC_KP_EQUAL_AS400`    |                    |Keypad `=` on AS/400 keyboards                 |
-|`KC_INT1`              |`KC_RO`             |JIS `\` and <code>&#124;</code>                |
+|`KC_INT1`              |`KC_RO`             |JIS `\` and `_`                                |
 |`KC_INT2`              |`KC_KANA`           |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`           |JIS `¥`                                        |
+|`KC_INT3`              |`KC_JYEN`           |JIS `¥` and <code>&#124;</code>                |
 |`KC_INT4`              |`KC_HENK`           |JIS Henkan                                     |
 |`KC_INT5`              |`KC_MHEN`           |JIS Muhenkan                                   |
 |`KC_INT6`              |                    |JIS Numpad `,`                                 |
@@ -459,6 +459,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+
 ## [Unicode Support](feature_unicode.md)
 
 |Key         |Aliases|                                                 |

docs/keycodes_basic.md

@@ -123,9 +123,9 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 |Key       |Aliases  |Description                    |
 |----------|---------|-------------------------------|
-|`KC_INT1` |`KC_RO`  |JIS `\` and <code>&#124;</code>|
+|`KC_INT1` |`KC_RO`  |JIS `\` and `_`                |
 |`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana          |
-|`KC_INT3` |`KC_JYEN`|JIS `¥`                        |
+|`KC_INT3` |`KC_JYEN`|JIS `¥` and <code>&#124;</code>|
 |`KC_INT4` |`KC_HENK`|JIS Henkan                     |
 |`KC_INT5` |`KC_MHEN`|JIS Muhenkan                   |
 |`KC_INT6` |         |JIS Numpad `,`                 |

docs/reference_configurator_support.md

@@ -0,0 +1,195 @@
+# Supporting Your Keyboard in QMK Configurator
+
+This page covers how to properly support keyboards in the [QMK Configurator](https://config.qmk.fm/).
+
+
+## How the Configurator Understands Keyboards
+
+To understand how the Configurator understands keyboards, first one must understand layout macros. For this exercise, we're going to imagine a 17-key numpad PCB, which we're going to call `numpad`.
+
+```
+┌───┬───┬───┬───┐
+│NLk│ / │ * │ - │
+├───┼───┼───┼───┤
+│7  │8  │9  │ + │
+├───┼───┼───┤   │
+│4  │5  │6  │   │
+├───┼───┼───┼───┤
+│1  │2  │3  │Ent│
+├───┴───┼───┤   │
+│0      │ . │   │
+└───────┴───┴───┘
+```
+
+?> For more on layout macros, see [Understanding QMK: Matrix Scanning](understanding_qmk.md?id=matrix-scanning) and [Understanding QMK: Matrix to Physical Layout Map](understanding_qmk.md?id=matrix-to-physical-layout-map).
+
+The Configurator's API reads the keyboard's `.h` file from `qmk_firmware/keyboards/<keyboard>/<keyboard>.h`. For our numpad, this file would be `qmk_firmware/keyboards/numpad/numpad.h`:
+
+```c
+#pragma once
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22,      \
+    k30, k31, k32, k33, \
+    k40,      k42       \
+  ) { \
+    { k00, k01,   k02, k03   }, \
+    { k10, k11,   k12, k13   }, \
+    { k20, k21,   k22, KC_NO }, \
+    { k30, k31,   k32, k33   }, \
+    { k40, KC_NO, k42, KC_NO }  \
+}
+```
+
+QMK uses `KC_NO` to designate places in the switch matrix where there is no switch. Sometimes, `XXX`, `___` or `____` are used as shorthand to make this section easier to read if it needs to be debugged. This is usually defined near the beginning of the `.h` file:
+
+```c
+#pragma once
+
+#define XXX KC_NO
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22,      \
+    k30, k31, k32, k33, \
+    k40,      k42       \
+  ) { \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, XXX }, \
+    { k30, k31, k32, k33 }, \
+    { k40, XXX, k42, XXX }  \
+}
+```
+
+!> This usage differs from that of keymap macros, which almost always use `XXXXXXX` (seven capital X's) for `KC_NO` and `_______` (seven underscores) for `KC_TRNS`.
+
+!> To prevent user confusion, using `KC_NO` is preferred.
+
+The layout macro tells the Configurator that our keyboard has 17 keys, arranged in five rows of four columns each. Our switch positions are named `k<row><column>`, counting from 0. The names themselves actually don't matter, as long as they match between the top section, which receives the keycodes from the keymap, and the bottom half which designates where each key is in the matrix.
+
+To display our keyboard in a way that resembles the physical keyboard, we need to build a JSON file that tells the Configurator how to tie the physical locations and sizes of our keys to our switch matrix.
+
+## Building the JSON file
+
+To build the JSON file, the easiest way is to build the layout in [Keyboard Layout Editor](http://www.keyboard-layout-editor.com/) ("KLE"), from which we'll feed the Raw Data into a QMK tool that converts this data into a JSON the Configurator will read and use. Since KLE opens by default with a numpad layout, we're just going to remove the Getting Started instructions, and use what's left.
+
+Once the layout is as desired, move to the Raw Data tab in KLE, and copy the contents:
+
+```
+["Num Lock","/","*","-"],
+["7\nHome","8\n↑","9\nPgUp",{h:2},"+"],
+["4\n←","5","6\n→"],
+["1\nEnd","2\n↓","3\nPgDn",{h:2},"Enter"],
+[{w:2},"0\nIns",".\nDel"]
+```
+
+To convert this data into our JSON, go to the [QMK KLE-JSON Converter](https://qmk.fm/converter/), paste the Raw Data into the Input field, and click the Convert button. After a moment, our JSON data will appear in the Output field. Copy the contents to a new text document, and name the document `info.json`, saving it in the same folder that contains `numpad.h`.
+
+Use the `keyboard_name` object to set the name of the keyboard. The `bootloader` object is deprecated, so it can be deleted. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality.
+
+```json
+{
+    "keyboard_name": "Numpad",
+    "url": "",
+    "maintainer": "qmk",
+    "tags": {
+        "form_factor": "numpad"
+    },
+    "width": 4,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Num Lock", "x":0, "y":0},
+                {"label":"/", "x":1, "y":0},
+                {"label":"*", "x":2, "y":0},
+                {"label":"-", "x":3, "y":0},
+                {"label":"7", "x":0, "y":1},
+                {"label":"8", "x":1, "y":1},
+                {"label":"9", "x":2, "y":1},
+                {"label":"+", "x":3, "y":1, "h":2},
+                {"label":"4", "x":0, "y":2},
+                {"label":"5", "x":1, "y":2},
+                {"label":"6", "x":2, "y":2},
+                {"label":"1", "x":0, "y":3},
+                {"label":"2", "x":1, "y":3},
+                {"label":"3", "x":2, "y":3},
+                {"label":"Enter", "x":3, "y":3, "h":2},
+                {"label":"0", "x":0, "y":4, "w":2},
+                {"label":".", "x":2, "y":4}
+            ]
+        }
+    }
+}
+```
+
+The `layouts` object contains the data that represents the physical layout of the keyboard. It has an object `LAYOUT`, which needs to match the name of our layout macro from `numpad.h`. The `LAYOUT` object itself has an object named `layout`, which contains one JSON object for each physical key on our keyboard, formatted as follows:
+
+```
+  ┌ The name of the key. Not displayed in the Configurator.
+  │                   ┌ The key's X-axis location, in key units from the
+  │                   │ keyboard's left edge.
+  │                   │      ┌ The key's Y-axis location, in key units from
+  │                   │      │ the keyboard's top (rear-facing) edge.
+  ↓                   ↓      ↓
+{"label":"Num Lock", "x":0, "y":0},
+```
+
+Some objects will also have `"w"` and `"h"` keys, which represent a key's width and height, respectively.
+
+?> For more on the `info.json` files, see [QMK Keyboard Guidelines: Keyboard Metadata](hardware_keyboard_guidelines.md?id=keyboard-metadata)
+
+
+## How the Configurator Programs Keys
+
+The Configurator's API uses the layout macro and the JSON file we've given it to create a visual representation of the keyboard that has each visual object tied to a specific key, in sequence:
+
+key in layout macro | JSON object used
+:---: | :----
+k00   | {"label":"Num Lock", "x":0, "y":0}
+k01   | {"label":"/", "x":1, "y":0}
+k02   | {"label":"*", "x":2, "y":0}
+k03   | {"label":"-", "x":3, "y":0}
+k10   | {"label":"7", "x":0, "y":1}
+k11   | {"label":"8", "x":1, "y":1}
+k12   | {"label":"9", "x":2, "y":1}
+k13   | {"label":"+", "x":3, "y":1, "h":2}
+k20   | {"label":"4", "x":0, "y":2}
+k21   | {"label":"5", "x":1, "y":2}
+k22   | {"label":"6", "x":2, "y":2}
+k30   | {"label":"1", "x":0, "y":3}
+k31   | {"label":"2", "x":1, "y":3}
+k32   | {"label":"3", "x":2, "y":3}
+k33   | {"label":"Enter", "x":3, "y":3, "h":2}
+k40   | {"label":"0", "x":0, "y":4, "w":2}
+k42   | {"label":".", "x":2, "y":4}
+
+When a user selects the top-left key in the Configurator, and assigns Num Lock to it, the Configurator builds a keymap file with `KC_NLCK` as the first key, and so on as the keymap is built. The `label` keys are not used; they are only for the user's reference in identifying specific keys when debugging the `info.json` file.
+
+
+## Issues and Hazards
+
+Currently, the Configurator does not support key rotation or non-rectangular key shapes like ISO Enter. Additionally, keys that are vertically-offset from their "row" &mdash; the arrow keys on 1800-layouts like the [TKC1800](https://github.com/qmk/qmk_firmware/tree/4ac48a61a66206beaf2fdd5f2939d8bbedd0004c/keyboards/tkc1800/) being a prominent example &mdash; confuse the KLE-to-JSON Converter, if not adjusted for by the contributor of the `info.json` file.
+
+### Workarounds
+
+#### Non-rectangular keys
+
+For ISO Enter keys, QMK custom is to display it as a rectangular key, 1.25u wide and 2u high, aligned so its right edge is aligned with the right edge of the alphanumeric key block.
+
+![](https://i.imgur.com/JKngtTw.png)  
+*A 60% keyboard in standard ISO layout, as rendered by QMK Configurator.*
+
+#### Vertically-offset keys
+
+For vertically-offset keys, place them in KLE as if they were not offset, then edit the Y-values as needed in the converted JSON file
+
+![](https://i.imgur.com/fmDvDzR.png)  
+*An 1800-layout keyboard as rendered in Keyboard Layout Editor, without the vertical offset applied to the arrow keys.*
+
+![](https://i.imgur.com/8beYMBR.png)  
+*A Unix diff file, showing the changes needed to vertically-offset the arrow keys in our keyboard's JSON file.*

drivers/arm/i2c_master.c

@@ -26,6 +26,7 @@
  */
 
 #include "i2c_master.h"
+#include "quantum.h"
 #include <string.h>
 #include <hal.h>
 
@@ -41,9 +42,11 @@ static const I2CConfig i2cconfig = {
   0
 };
 
+__attribute__ ((weak))
 void i2c_init(void)
 {
-  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
+  setPinInput(B6); // Try releasing special pins for a short time
+  setPinInput(B7);
   chThdSleepMilliseconds(10);
 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);

keyboards/1upkeyboards/1up60hse/keymaps/default/config.h

@@ -1,4 +1,5 @@
 /* Copyright 2018 MechMerlin
+ * Copyright 2018 Logan Huskins
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c

@@ -1,4 +1,5 @@
 /* Copyright 2018 MechMerlin
+ * Copyright 2018 Logan Huskins
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,28 +18,34 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_60_ansi(
-		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, 
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
-		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
-		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, 
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(2), KC_RGUI, KC_RCTL),
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
+    KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,
+    KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H,
+    KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B,
+    KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,
+    KC_RALT, KC_RGUI, MO(1), KC_LCTL
+  ),
 
-	[1] = LAYOUT_60_ansi(
-		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+  [1] = LAYOUT_60_ansi(
+    KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+    KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN,
+    KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+    KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END,
+    KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS
+  ),
 
   [2] = LAYOUT_60_ansi(
-		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_STEP, BL_DEC, BL_INC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, RGB_SAI, RGB_HUD, RGB_HUI, RGB_MOD, RGB_TOG, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, RESET, BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI,
+    RGB_SAI, RGB_VAI, RGB_SPI, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
 };
 
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
   return true;
 }
-

keyboards/1upkeyboards/1up60hse/keymaps/default/readme.md

@@ -1,6 +1,4 @@
-# 1up60hse default keymap
+# 1up60hse default keymap generated by QMK Configurator
 
-This is the default keymap provided by [1upkeyboards](https://www.1upkeyboards.com).  
+This is the keymap used by [QMK Configurator](https://config.qmk.fm/#/1upkeyboards/1up60hse/LAYOUT_60_ansi) as default.  
 
-## Notes
-- Software reset key is located on `Esc` on the third layer.

keyboards/30wer/30wer.c

@@ -0,0 +1 @@
+#include "30wer.h"

keyboards/30wer/30wer.h

@@ -0,0 +1,14 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+	     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b \
+) \
+{ \
+	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \
+	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c }, \
+	{      k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b } \
+}

keyboards/30wer/config.h

@@ -0,0 +1,31 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x1234
+#define PRODUCT_ID      0x5678
+#define DEVICE_VER      0x0000
+#define MANUFACTURER    8o7wer
+#define PRODUCT         30wer
+#define DESCRIPTION     Gherkin style construction 30% staggered pcb kit
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 13
+
+/* pcb default pin-out */
+#define MATRIX_ROW_PINS { E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1, D0, D4, C6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS

keyboards/30wer/info.json

@@ -0,0 +1,51 @@
+{
+    "keyboard_name": "30wer", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 13.25, 
+    "height": 3, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Tab", "x":0, "y":0},
+                {"label":"Q", "x":1, "y":0},
+                {"label":"W", "x":2, "y":0},
+                {"label":"E", "x":3, "y":0},
+                {"label":"R", "x":4, "y":0},
+                {"label":"T", "x":5, "y":0},
+                {"label":"Y", "x":6, "y":0},
+                {"label":"U", "x":7, "y":0},
+                {"label":"I", "x":8, "y":0},
+                {"label":"O", "x":9, "y":0},
+                {"label":"P", "x":10, "y":0},
+                {"label":"Bksp", "x":11, "y":0},
+                {"label":"Delete", "x":12, "y":0, "w":1.25},
+                {"label":"Ctrl", "x":0, "y":1, "w":1.25},
+                {"label":"A", "x":1.25, "y":1},
+                {"label":"S", "x":2.25, "y":1},
+                {"label":"D", "x":3.25, "y":1},
+                {"label":"F", "x":4.25, "y":1},
+                {"label":"G", "x":5.25, "y":1},
+                {"label":"H", "x":6.25, "y":1},
+                {"label":"J", "x":7.25, "y":1},
+                {"label":"K", "x":8.25, "y":1},
+                {"label":"L", "x":9.25, "y":1},
+                {"label":":", "x":10.25, "y":1},
+                {"label":"\"", "x":11.25, "y":1},
+                {"label":"Enter", "x":12.25, "y":1},
+                {"label":"Shift", "x":0, "y":2, "w":1.75},
+                {"label":"Z", "x":1.75, "y":2},
+                {"label":"X", "x":2.75, "y":2},
+                {"label":"C", "x":3.75, "y":2},
+                {"label":"V", "x":4.75, "y":2},
+                {"label":"B", "x":5.75, "y":2},
+                {"label":"N", "x":6.75, "y":2},
+                {"label":"M", "x":7.75, "y":2},
+                {"label":"<", "x":8.75, "y":2},
+                {"label":">", "x":9.75, "y":2},
+                {"label":"?", "x":10.75, "y":2},
+                {"label":"Space", "x":11.75, "y":2, "w":1.5}
+            ]
+        }
+    }
+}

keyboards/30wer/keymaps/default/keymap.c

@@ -0,0 +1,17 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_BSPC, \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+           KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LT(1, KC_SPC) \
+),
+
+[1] = LAYOUT( \
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_UP,   KC_DEL, \
+  _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, \
+           KC_LALT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______ \
+),
+
+};

keyboards/30wer/readme.md

@@ -0,0 +1,16 @@
+30wer by 8o7wer
+===
+
+![30wer](https://i.imgur.com/ZYbRvY7.png)
+
+Keyboard Maintainer: [Filip Sund](https://github.com/FSund)  
+Hardware Supported: Pro Micro  
+Hardware Availability: Group buy
+
+More info in the [group by thread at Keebtalk](https://www.keebtalk.com/t/gb-30wer-by-8o7wer/3618/).
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 30wer:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/30wer/rules.mk

@@ -33,27 +33,28 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
 #     different sizes, comment this out, and the correct address will be loaded
 #     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = caterina
 
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
 # Build Options
-#   comment out to disable the options.
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
-
-LAYOUTS = ortho_3x10
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no 		# Enable WS2812 RGB underlight.

keyboards/40percentclub/25/25.c

@@ -0,0 +1,60 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "25.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+	{{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
+	{{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
+	{{4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}},
+	{{4, 8}, {3, 8}, {2, 8}, {1, 8}, {0, 8}},
+	{{4, 9}, {3, 9}, {2, 9}, {1, 9}, {0, 9}},
+
+	{{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}},
+  {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}},
+  {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}},
+	{{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}},
+	{{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}},
+};
+#endif

keyboards/40percentclub/25/25.h

@@ -0,0 +1,85 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define ___ KC_NO
+
+#ifndef FLIP_HALF
+#define LAYOUT_ortho_5x10( \
+	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
+	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
+	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \
+	L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \
+	L40, L41, L42, L43, L44, R40, R41, R42, R43, R44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ R04, R03, R02, R01, R00 }, \
+	{ R14, R13, R12, R11, R10 }, \
+	{ R24, R23, R22, R21, R20 }, \
+	{ R34, R33, R32, R31, R30 }, \
+	{ R44, R43, R42, R41, R40 }  \
+}
+#else
+#define LAYOUT_ortho_5x10( \
+	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
+	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
+	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \
+	L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \
+	L40, L41, L42, L43, L44, R40, R41, R42, R43, R44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ R00, R01, R02, R03, R04 }, \
+	{ R10, R11, R12, R13, R14 }, \
+	{ R20, R21, R22, R23, R24 }, \
+	{ R30, R31, R32, R33, R34 }, \
+	{ R40, R41, R42, R43, R44 }  \
+}
+#endif
+
+#define LAYOUT_ortho_5x5( \
+	L00, L01, L02, L03, L04, \
+	L10, L11, L12, L13, L14, \
+	L20, L21, L22, L23, L24, \
+	L30, L31, L32, L33, L34, \
+	L40, L41, L42, L43, L44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }  \
+}
+
+#define LAYOUT_macro LAYOUT_ortho_5x5
+#define LAYOUT_split LAYOUT_ortho_5x10
+
+#ifdef USE_I2C
+  #error "I2C not Supported"
+#endif

keyboards/40percentclub/25/config.h

@@ -0,0 +1,230 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x0F25
+#define MANUFACTURER    di0ib
+#define PRODUCT         The 5x5 Keyboard
+#define DESCRIPTION     A split 50 key keyboard
+
+#define USE_SERIAL
+
+/* Select hand configuration */
+#define MASTER_LEFT
+//#define MASTER_RIGHT
+//#define EE_HANDS
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 5*2
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/

keyboards/40percentclub/25/info.json

@@ -0,0 +1,29 @@
+{
+    "keyboard_name": "foobar",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 6,
+    "height": 2,
+    "layouts": {
+        "LAYOUT_macro": {
+            "key_count": 15,
+            "layout": [
+              {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},
+              {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
+              {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2},
+              {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3},
+              {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}
+          ]
+        },
+        "LAYOUT_split": {
+            "key_count": 30,
+            "layout": [
+              {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0},
+              {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1},
+              {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2},
+              {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3},
+              {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}
+          ]
+        }
+    }
+}

keyboards/40percentclub/25/keymaps/default/keymap.c

@@ -0,0 +1,87 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER  1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Qwerty
+   * ,---------------------------------------------------------------------.
+   * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |
+   * |------+------+------+------+------+------+------+------+------+------|
+   * |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |
+   * |------+------+------+------+-------------+------+------+------+------|
+   * |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  | Bksp |
+   * |------+------+------+------+------|------+------+------+------+------|
+   * |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |Enter |
+   * |------+------+------+------+------+------+------+------+------+------|
+   * | Ctrl | GUI  | Alt  |Lower |Space | Shift| Left | Down |  Up  |Right |
+   * `---------------------------------------------------------------------'
+   */
+  [_QWERTY] = LAYOUT_split(
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    \
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_BSPC, \
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_ENT,  \
+    KC_LCTL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_LSFT, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+  ),
+
+  /* Lower
+   * ,---------------------------------------------------------------------.
+   * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  `   |   /  |   _  |   +  |
+   * |------+------+------+------+------|------+------+------+------+------|
+   * |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |  ~   |   [  |   ]  |  \   |
+   * |------+------+------+------+-------------+------+------+------+------|
+   * | Esc  |      |      |      |      |      |      |   ;  |  "   |  Del |
+   * |------+------+------+------+------|------+------+------+------+------|
+   * | Tab  |      |      |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      | Home | PgDn | PgUp | End  |
+   * `---------------------------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT_split( \
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_GRV, KC_SLSH, KC_UNDS, KC_PLUS, \
+    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TILD, KC_LBRC, KC_RBRC, KC_PIPE, \
+    KC_ESC,  _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_DEL,  \
+    KC_TAB,  _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/40percentclub/25/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default split keymap for 25

keyboards/40percentclub/25/keymaps/macro/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2017 Jason Williams (Wilba)
+/* Copyright 2018
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,27 +13,30 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#pragma once
+#include QMK_KEYBOARD_H
 
-#define PROTOCOL_VERSION 0x0001
-
-enum m6_b_command_id
-{
-	id_get_protocol_version = 0x01, // always 0x01
-	id_get_keyboard_value,
-	id_set_keyboard_value,
-	id_dynamic_keymap_get_keycode,
-	id_dynamic_keymap_set_keycode,
-	id_dynamic_keymap_reset,
-	id_backlight_config_set_value,
-	id_backlight_config_get_value,
-	id_backlight_config_save,
-	id_eeprom_reset,
-	id_bootloader_jump,
-	id_unhandled = 0xFF,
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_macro(
+    KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,  \
+    KC_GRV,   KC_Q,    KC_W,    KC_E,    KC_R,  \
+    KC_TAB,   KC_A,    KC_S,    KC_D,    KC_F,  \
+    KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,  \
+    KC_LCTL,  KC_LGUI, KC_LALT, KC_SPC,  KC_SPC \
+  ),
 };
 
-enum m6_b_keyboard_value_id
-{
-	id_uptime = 0x01
-};
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/40percentclub/25/keymaps/macro/readme.md

@@ -0,0 +1 @@
+# The default macro keymap for 25

keyboards/40percentclub/25/readme.md

@@ -0,0 +1,18 @@
+# 25
+
+![25](https://2.bp.blogspot.com/-lBK_ZlB3a9Q/WcAM0B_vwdI/AAAAAAACDgs/qnI9YB53pzck4Bw0v5QRvypDMs80CxWVQCLcBGAs/s640/IMG_0695.JPG)
+===
+
+Split 50 key keyboard - it is the largest keybad that fits within the 100mm x 100mm PCB size. Can be used together as a split keyboard or as a single 25 key macropad.
+
+* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/25)
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: 25 PCB  
+Hardware Availability: [25 project on 40% Keyboards](http://www.40percent.club/2017/09/25.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 40percentclub/25:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/25/rules.mk

@@ -0,0 +1,85 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs (+400)
+
+# Enable generic behavior for split boards
+SPLIT_KEYBOARD = yes
+
+LAYOUTS = ortho_5x5 ortho_5x10

keyboards/40percentclub/4x4/4x4.h

@@ -1,6 +1,4 @@
-
-#ifndef FOURX4_H
-#define FOURX4_H
+#pragma once
 
 #include "quantum.h"
 #define ___ KC_NO
@@ -58,5 +56,3 @@
     { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, K2f }, \
     { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, K3f } \
 }
-
-#endif

keyboards/40percentclub/4x4/keymaps/default/keymap.c

@@ -6,9 +6,6 @@
 #define NUM 2
 #define DIR 3
 
-// Readability keycodes
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Single 4x4 board only
@@ -65,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [NUM] = LAYOUT_ortho_4x16(
   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, _______,
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS, _______,
-  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, _______,
+  _______, KC_F11,  KC_F12,  _______, _______, _______, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, _______,
   _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______, _______
   ),
 
@@ -90,23 +87,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-    (void)event;
-
-  switch (id) {
-
-  }
-  return MACRO_NONE;
-}
-
-
 void matrix_init_user(void) {
 
 }

keyboards/40percentclub/4x4/readme.md

@@ -17,7 +17,8 @@ Hardware Availability: [4x4x4x4x4 project on 40% Keyboards](http://www.40percent
 
 Make example for this keyboard (after setting up your build environment):  
 
-    make 4x4:default
+    make 40percentclub/4x4:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.  
 First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.  

keyboards/40percentclub/4x4/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs (+400)
+
+#FIXME: Community keymap build are currently failing due to missing functionality
+#LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16

keyboards/40percentclub/5x5/5x5.h

@@ -1,6 +1,4 @@
-
-#ifndef FIVEX5_H
-#define FIVEX5_H
+#pragma once
 
 #include "quantum.h"
 #define ___ KC_NO
@@ -53,5 +51,3 @@
     { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e}, \
     { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e} \
 }
-
-#endif

keyboards/40percentclub/5x5/keymaps/default/keymap.c

@@ -6,9 +6,6 @@
 #define NUM 2
 #define DIR 3
 
-// Readability keycodes
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Single 5x5 board only
@@ -74,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______,
   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS,
-  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT,
+  _______, KC_F11,  KC_F12,  _______, _______, _______, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT,
   _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______
   ),
 
@@ -102,25 +99,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
 
 void matrix_init_user(void) {
 

keyboards/40percentclub/5x5/readme.md

@@ -17,7 +17,8 @@ Hardware Availability: [5x5 project on 40% Keyboards](http://www.40percent.club/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make 5x5:default
+    make 40percentclub/5x5:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.    
 First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.  

keyboards/40percentclub/5x5/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs (+400)
+
+#FIXME: Community keymap build are currently failing due to missing functionality
+#LAYOUTS = ortho_5x5  ortho_5x10  ortho_5x15

keyboards/40percentclub/6lit/6lit.h

@@ -16,10 +16,10 @@
 #pragma once
 
 #include "quantum.h"
-#define ________ KC_NO
+#define ___ KC_NO
 
 #ifndef FLIP_HALF
-#define LAYOUT_split( \
+#define LAYOUT_ortho_2x6( \
 	L00, L01, L02, R00, R01, R02, \
 	L10, L11, L12, R10, R11, R12  \
 ) { \
@@ -29,7 +29,7 @@
 	{ R12, R11, R10 }, \
 }
 #else
-#define LAYOUT_split( \
+#define LAYOUT_ortho_2x6( \
 	L00, L01, L02, R00, R01, R02, \
 	L10, L11, L12, R10, R11, R12  \
 ) { \
@@ -40,15 +40,18 @@
 }
 #endif
 
-#define LAYOUT_macro( \
+#define LAYOUT_ortho_2x3( \
 	L00, L01, L02, \
 	L10, L11, L12  \
 ) { \
 	{ L00, L01, L02 }, \
 	{ L10, L11, L12 }, \
+	{ ___, ___, ___ }, \
+  { ___, ___, ___ }, \
 }
 
-#define LAYOUT LAYOUT_macro
+#define LAYOUT_macro LAYOUT_ortho_2x3
+#define LAYOUT_split LAYOUT_ortho_2x6
 
 #ifdef USE_I2C
   #error "I2C not Supported"

keyboards/40percentclub/6lit/readme.md

@@ -1,6 +1,7 @@
 # 6lit
 
 ![6lit](https://1.bp.blogspot.com/-Pa8RgYZ0hy8/Wbmr4bjuV0I/AAAAAAACDbI/WLKQMDlcDVAVf1lAIRMN51usR1XcCCVNgCLcBGAs/s1600/a.JPG)
+===
 
 6 key macropad that fits within the 100mm x 100mm PCB size. Can be used singly as a regular 6 key macropad as well.
 
@@ -12,6 +13,6 @@ Hardware Availability: [6lit project on 40% Keyboards](http://www.40percent.club
 
 Make example for this keyboard (after setting up your build environment):
 
-    make 6lit:default
+    make 40percentclub/6lit:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/foobar/foobar.h

@@ -19,7 +19,7 @@
 #define ___ KC_NO
 
 #ifndef FLIP_HALF
-#define LAYOUT_split( \
+#define LAYOUT_ortho_3x10( \
 	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
 	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
 	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24  \
@@ -32,7 +32,7 @@
 	{ R24, R23, R22, R21, R20 }  \
 }
 #else
-#define LAYOUT_split( \
+#define LAYOUT_ortho_3x10( \
 	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
 	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
 	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24  \
@@ -46,7 +46,7 @@
 }
 #endif
 
-#define LAYOUT_macro( \
+#define LAYOUT_ortho_3x5( \
 	L00, L01, L02, L03, L04, \
   L10, L11, L12, L13, L14, \
   L20, L21, L22, L23, L24  \
@@ -59,7 +59,8 @@
   { ___, ___, ___, ___, ___ }  \
 }
 
-#define LAYOUT LAYOUT_macro
+#define LAYOUT_macro LAYOUT_ortho_3x5
+#define LAYOUT_split LAYOUT_ortho_3x10
 
 #ifdef USE_I2C
   #error "I2C not Supported"

keyboards/40percentclub/foobar/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/40percentclub/foobar/keymaps/default/keymap.c

@@ -15,7 +15,6 @@
  */
 #include QMK_KEYBOARD_H
 
-#define _______ KC_TRNS
 #define FN1_Q LT(1, KC_Q)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/foobar/keymaps/macro/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/40percentclub/foobar/readme.md

@@ -1,6 +1,7 @@
 # foobar
 
 ![foobar](https://2.bp.blogspot.com/-rr8TK6xg2N0/WbwVL2O7EfI/AAAAAAACDc8/209wN69ju0wAFICYYPNLIEGQhat5-5MbwCLcBGAs/s640/a.JPG)
+===
 
 Split 30% keyboard that fits within the 100mm x 100mm PCB size. Can be used together as a split keyboard or as a single 15 key macropad.
 
@@ -12,6 +13,6 @@ Hardware Availability: [foobar project on 40% Keyboards](http://www.40percent.cl
 
 Make example for this keyboard (after setting up your build environment):
 
-    make foobar:default
+    make 40percentclub/foobar:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/foobar/rules.mk

@@ -81,3 +81,5 @@ HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs (+400)
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes
+
+LAYOUTS = ortho_3x10

keyboards/40percentclub/gherkin/config.h

@@ -1,5 +1,4 @@
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -50,5 +49,3 @@
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #endif
-
-#endif

keyboards/40percentclub/gherkin/gherkin.h

@@ -1,5 +1,4 @@
-#ifndef GHERKIN_H
-#define GHERKIN_H
+#pragma once
 
 #include "quantum.h"
 
@@ -14,5 +13,3 @@
 	{ K30,   K31,   K32,   K33,   K34,   K35 }, \
 	{ K40,   K41,   K42,   K43,   K44,   K45 }  \
 }
-
-#endif

keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h

@@ -1,7 +1,5 @@
-#ifndef CONFIG_KEYMAP_H
-#define CONFIG_KEYMAP_H
+#pragma once
 
-#include "../../config.h"
 #define RGB_DI_PIN F6
 #define RGBLED_NUM 10
 #define RGBLIGHT_ANIMATIONS
@@ -9,5 +7,3 @@
 #undef BACKLIGHT_LEVELS
 #endif
 #define BACKLIGHT_LEVELS 3
-
-#endif

keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk

@@ -1,7 +1,3 @@
-ifndef QUANTUM_DIR
-  include ../../../../Makefile
-endif
-
 USER_NAME := bbaserdem-nouserspace
 
 STENO_ENABLE = no      # Additional protocols for Stenography(+1700), requires VIRTSER

keyboards/40percentclub/gherkin/keymaps/default/keymap.c

@@ -1,6 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define _______ KC_TRNS
 #define FN1_Q LT(1, KC_Q)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -19,16 +18,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-    (void)event;
-
-  switch (id) {
-
-  }
-  return MACRO_NONE;
-}
-
 void matrix_init_user(void) {
 }
 

keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h

@@ -1,7 +1,4 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
+#pragma once
 
 #undef RGB_DI_PIN
 #undef RGBLED_NUM
@@ -11,5 +8,3 @@
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
-
-#endif

keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c

@@ -12,10 +12,9 @@ enum custom_keycodes {
   PS = SAFE_RANGE,
   AI,
   PR,
+  MACRO_0,
 };
 
-#define _______ KC_TRNS
-
 #define PS TO(0)
 #define AI TO(1)
 #define PR TO(2)
@@ -72,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   // Illustrator layer
   [_AI] = LAYOUT_ortho_3x10(
-    _______, M(0),    RULER,   _______, KC_G,    _______, _______, KC_Q,  KC_MINS, KC_PLUS,
+    _______, MACRO_0, RULER,   _______, KC_G,    _______, _______, KC_Q,  KC_MINS, KC_PLUS,
     _______, _______, _______, KC_E,    _______, _______, _______, SHAPE, KC_O,    OPEN,
     _______, _______, _______, _______, _______, _______, _______, KC_M,  KC_SLSH, PR
   ),
@@ -133,20 +132,14 @@ void matrix_scan_user(void) {
   #endif
 }
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-    (void)event;
-
-  switch (id) {
-    case 0:
-      // Save for Web Macro.
-      return MACRO(D(LSFT), D(LALT), D(LCTL), T(S), U(LCTL), U(LALT), U(LSFT), END);
-  }
-  return MACRO_NONE;
-}
-
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-  }
-  return true;
-}
+	if (record->event.pressed) {
+		switch(keycode) {
+			case MACRO_0:
+        // Save for Web Macro.
+				SEND_STRING(SS_LSFT(SS_LALT(SS_LCTRL("s"))));
+				return false;
+		}
+	}
+	return true;
+};

keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk

@@ -1,7 +1,3 @@
 BACKLIGHT_ENABLE = yes
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/40percentclub/gherkin/keymaps/mjt/config.h

@@ -0,0 +1,7 @@
+#pragma once
+
+/* USB Device descriptor parameter */
+#undef MANUFACTURER
+#undef DESCRIPTION
+#define MANUFACTURER    Some Guy
+#define DESCRIPTION     30 percent disaster

keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c

@@ -12,7 +12,6 @@ enum {
   TD_C_LALT = 2,
   TD_A_TAB = 3,
   TD_Q_ESC = 4,
-//   M(0)
 };
 
 //Friendly Layer Names
@@ -37,10 +36,6 @@ enum gherkin_keycodes {
   EXT_PLV
 };
 
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_QWERTY] = LAYOUT_ortho_3x10(
     TD(TD_Q_ESC),   KC_W,               KC_E,           KC_R,  KC_T,               KC_Y,   KC_U,  KC_I,     KC_O,    KC_P,
@@ -171,30 +166,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     return true;
 }
 
-
-/*
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-
-  switch (id) {
-        case 0: {
-            if (record->event.pressed) {
-                key_timer = timer_read(); // if the key is being pressed, we start the timer.
-            }
-            else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down").
-                if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap.
-                    return MACRO( D(LSFT), END  );
-                }
-                else {
-                    return MACRO( T(N), END  );
-                }
-            }
-            break;
-        }
-      }
-  return MACRO_NONE;
-}*/
-
 void matrix_init_user(void) {
     #ifdef AUDIO_ENABLE
         startup_user();

keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk

@@ -0,0 +1,2 @@
+AUDIO_ENABLE = yes          # Audio output on port C6
+TAP_DANCE_ENABLE = yes

keyboards/40percentclub/gherkin/keymaps/steno/config.h

@@ -1,12 +1,7 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
+#pragma once
 
 #define NO_ACTION_LAYER
 #define NO_ACTION_TAPPING
 #define NO_ACTION_ONESHOT
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-
-#endif

keyboards/40percentclub/gherkin/keymaps/steno/rules.mk

@@ -1,8 +1,4 @@
-ifndef QUANTUM_DIR
-  include ../../../../Makefile
-endif
-
-STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER
+STENO_ENABLE = yes     # Additional protocols for Stenography(+1700), requires VIRTSER
 
 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
@@ -13,4 +9,4 @@ SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+// place overrides here

keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/keymap.c

@@ -4,8 +4,6 @@
 #define ST_BOLT QK_STENO_BOLT
 #define ST_GEM  QK_STENO_GEMINI
 
-#define XXXXXXX KC_NO
-
 enum keyboard_layers {
   _QWERTY,
   _RAISE,

keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/rules.mk

@@ -1,6 +1,2 @@
-ifndef QUANTUM_DIR
-  include ../../../../Makefile
-endif
-
 MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
 STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER

keyboards/40percentclub/gherkin/readme.md

@@ -1,4 +1,6 @@
-Gherkin
+# Gherkin
+
+![Gherkin](https://4.bp.blogspot.com/-sQ18-lNZXOc/WCzlTde-4PI/AAAAAAAB_JQ/qQrehAMG6DMKf3i4oj4mkmLGOfTUvb3KgCLcB/s640/IMG_20161116_122926.jpg)
 ===
 
 A 30 key keyboard.
@@ -11,8 +13,9 @@ Hardware Availability: [Gherkin project on 40% Keyboards](http://www.40percent.c
 
 Make example for this keyboard (after setting up your build environment):
 
-    make gherkin:default
+    make 40percentclub/gherkin:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 First pass at adding support for the gherkin keyboard. Compiles but completely
 untested. Intended to kick-start development.

keyboards/40percentclub/gherkin/rules.mk

@@ -0,0 +1,74 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	  # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	  # Audio control and System control(+450)
+CONSOLE_ENABLE = no	    # Console for debug(+400)
+COMMAND_ENABLE = no     # Commands for debug and configuration
+SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+
+LAYOUTS = ortho_3x10

keyboards/40percentclub/luddite/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "foobar",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+      "LAYOUT_60_ansi": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      }
+    }
+}