Add logic for AT90USBxx7 where needed (#10203)

* Wording & formatting changes in Tapping Force Hold

The Permissive Hold and the Ignore Mod Tap Interrupt sections were also modified to remove the quotes
around "tapping".

* Removed all trailing whitespaces from tap hold doc

* "it's simply really:" → "it's simple really:"

* "This allows to keep the ability" → "This allows keeping the ability"

Used the gerund form of "to keep" in the Tapping Force Hold section of the Tap Hold docs.

Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>

Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>

bootloader.mk

@@ -35,30 +35,30 @@
 ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
     OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
         BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
     OPT_DEFS += -DBOOTLOADER_LUFA_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
         BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
     OPT_DEFS += -DBOOTLOADER_QMK_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
         BOOTLOADER_SIZE = 8192
     endif
 endif

docs/feature_bluetooth.md

@@ -26,7 +26,10 @@ A Bluefruit UART friend can be converted to an SPI friend, however this [require
 
 <!-- FIXME: Document bluetooth support more completely. -->
 ## Bluetooth Rules.mk Options
-Use only one of these
+
+The currently supported Bluetooth chipsets do not support [N-Key Rollover (NKRO)](reference_glossary.md#n-key-rollover-nkro), so `rules.mk` must contain `NKRO_ENABLE = no`.
+
+Use only one of these to enable Bluetooth:
 * BLUETOOTH_ENABLE = yes (Legacy Option)
 * BLUETOOTH = RN42
 * BLUETOOTH = AdafruitBLE

docs/feature_oled_driver.md

@@ -300,6 +300,10 @@ bool oled_on(void);
 // Returns true if the screen was off or turns off
 bool oled_off(void);
 
+// Returns true if the oled is currently on, false if it is
+// not
+bool is_oled_on(void);
+
 // Basically it's oled_render, but with timeout management and oled_task_user calling!
 void oled_task(void);
 

docs/feature_rgb_matrix.md

@@ -129,7 +129,7 @@ Configure the hardware via your `config.h`:
 From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
 
 ```c
-const led_config_t g_led_config = { {
+led_config_t g_led_config = { {
   // Key Matrix to LED Index
   {   5, NO_LED, NO_LED,   0 },
   { NO_LED, NO_LED, NO_LED, NO_LED },

docs/ja/tap_hold.md

@@ -0,0 +1,195 @@
+# タップホールド設定オプション
+
+<!---
+  original document: 0.9.51:docs/tap_hold.md
+  git diff 0.9.51 HEAD -- docs/tap_hold.md | cat
+-->
+
+タップホールドオプションは素晴らしいものですが、問題が無いわけではありません。デフォルト設定を適切なものにしようとしましたが、一部の人にとってまだ問題を引き起こすかもしれません。
+
+次のオプションによりタップホールドキーの挙動を変更することができます。
+
+## タッピング時間
+
+以下の機能の全ての核心は、タッピング時間の設定です。これにより、何をタップとし、何をホールドとするかが決まります。これが自然に感じられるぴったりのタイミングは、キーボードごと、スイッチごと、あるいはキーごとに異ることもありえます。
+
+`config.h` に以下の設定を追加することで、この時間を全体的に設定することができます:
+
+```c
+#define TAPPING_TERM 200
+```
+
+この設定はミリ秒で定義され、デフォルトは 200ms です。これは大多数の人にとっての適切な平均値です。
+
+この機能をより細かく制御するために、以下を `config.h` に追加することができます:
+```c
+#define TAPPING_TERM_PER_KEY
+```
+
+そして、以下の関数をキーマップに追加します:
+
+```c
+uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case SFT_T(KC_SPC):
+            return TAPPING_TERM + 1250;
+        case LT(1, KC_GRV):
+            return 130;
+        default:
+            return TAPPING_TERM;
+    }
+}
+```
+
+
+## 許容ホールド
+
+[PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/) 以降、新しい `config.h` オプションがあります:
+
+```c
+#define PERMISSIVE_HOLD
+```
+
+これは高速なタイピストや高い `TAPPING_TERM` 設定に対して、タップとホールドキー(モッドタップのような)の動作を向上させます。
+
+モッドタップキーを押し、他のキーをタップ(押して放す)して、モッドタップキーを放すという動作の全てをタッピング時間内に行うと、両方のキーの「タッピング」機能が出力されます。
+
+例えば:
+
+- `SFT_T(KC_A)` を押す
+- `KC_X` を押す
+- `KC_X` を放す
+- `SFT_T(KC_A)` を放す
+
+通常、これら全てを `TAPPING_TERM` (デフォルト: 200ms) 内で行うと、ファームウェアとホストシステムによって `ax` として登録されます。許容ホールドを有効にすると、別のキーがタップされた場合にモッドタップキーを修飾キーと見なすように処理を変更し、 `X` (`SHIFT`+`x`)  と登録されます。
+
+?> `モッドタップ割り込みの無視`を有効にしている場合、これにより両方の動きが変更されます。通常のキーには、最初のキーが最初に放された場合、あるいは両方のキーが  `TAPPING_TERM` より長くホールドされた場合に、修飾キーが追加されます。
+
+この機能をより細かく制御するために、以下を `config.h` に追加することができます:
+
+```c
+#define PERMISSIVE_HOLD_PER_KEY
+```
+
+そして、以下の関数をキーマップに追加します:
+
+```c
+bool get_permissive_hold(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LT(1, KC_BSPC):
+            return true;
+        default:
+            return false;
+    }
+}
+```
+
+## モッドタップ割り込みの無視
+
+この設定を有効にするには、これを `config.h` に追加してください:
+
+```c
+#define IGNORE_MOD_TAP_INTERRUPT
+```
+
+許容ホールドと同様に、これは高速なタイピストのためのファームウェアの処理方法を変更します。モッドタップキーを押し、他のキーを押し、モッドタップキーを放し、通常のキーを放すと、通常は両方のキーの「タッピング」機能が出力されます。これはローリングコンボキーには望ましくないかもしれません。
+
+`モッドタップ割り込みの無視`を設定するには、両方のキーを `TAPPING_TERM` の間ホールドすると、(その修飾キーの)ホールド機能を実行する必要があります。
+
+例えば:
+
+- `SFT_T(KC_A)` を押す
+- `KC_X` を押す
+- `SFT_T(KC_A)` を放す
+- `KC_X` を放す
+
+通常、これは `X` (`SHIFT`+`x`) を送信します。`モッドタップ割り込みの無視` を有効にすると、ホールドアクションを登録するには、両方のキーを `TAPPING_TERM` の間ホールドする必要があります。この場合、素早いタップは `ax` を送信しますが、両方をホールドすると、`X`  (`SHIFT`+`x`) を出力します。
+
+
+?> __注意__: これはモディファイアにのみ関係し、レイヤー切り替えキーには関係しません。
+
+?> `許容ホールド`を有効にすると、これは両方がどのように動作するかを変更します。通常のキーには、最初のキーが最初に放された場合、あるいは両方のキーが  `TAPPING_TERM` より長くホールドされた場合に、修飾キーが追加されます。
+
+この機能をより細かく制御するために、以下を `config.h` に追加することができます:
+
+```c
+#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
+```
+
+そして、以下の関数をキーマップに追加します:
+
+```c
+bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case SFT_T(KC_SPC):
+            return true;
+        default:
+            return false;
+    }
+}
+```
+
+## タッピング強制ホールド
+
+`タッピング強制ホールド` を有効にするには、以下を `config.h` に追加します:
+
+```c
+#define TAPPING_FORCE_HOLD
+```
+
+タップの後でユーザがキーをホールドすると、これは修飾キーをホールドするかわりにタップされたキーを繰り返します。これにより、タップされたキーのために自動繰り返しを使うことができます。
+
+例:
+
+- SFT_T(KC_A) を押す
+- SFT_T(KC_A) を放す
+- SFT_T(KC_A) を押す
+- タッピング時間より長く待ちます...
+- SFT_T(KC_A) を放す
+
+デフォルトの設定では、最初に放したときに `a` が送信され、2回目の押下で `a` が送信され、コンピュータに自動リピート機能を作動させることができます。
+
+`TAPPING_FORCE_HOLD` を使うと、2回目の押下は Shift として解釈され、それをタップして使った後ですぐに修飾キーとして使うことができます。
+
+!> `TAPPING_FORCE_HOLD` はタッピングトグル(`TT` レイヤーキーコード、ワンショットタッピングトグルなど)を使うものをすべて破壊します。
+
+この機能をより細かく制御するために、以下を `config.h` に追加することができます:
+
+```c
+#define TAPPING_FORCE_HOLD_PER_KEY
+```
+
+そして、以下の関数をキーマップに追加します:
+
+```c
+bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LT(1, KC_BSPC):
+            return true;
+        default:
+            return false;
+    }
+}
+```
+
+## レトロタッピング
+
+`レトロタッピング`を有効にするには、以下を `config.h` に追加してください:
+
+```c
+#define RETRO_TAPPING
+```
+
+他のキーを押さずにデュアルファンクションキーを押して放しても何も起こりません。レトロタッピングを有効にすると、他のキーを押さずにキーを放すと、元のキーコードがタッピング時間外であっても送信されます。
+
+例えば、他のキーを押すことなく `LT(2, KC_SPACE)` を押したり放したりしても何も起こりません。これを有効にすると、代わりに `KC_SPACE` を送信します。
+
+## キー別の関数にキーレコードを含めるのはなぜですか？
+
+「キー別」の関数全てにキーレコードを含んでいることに気付いたかもしれません。そしてなぜそうしたのか不思議に思っているかもしれません。
+
+まぁ、それは単純に本当にカスタマイズのためです。ただし、具体的には、それはキーボードの配線方法によって異なります。例えば、各行が実際にキーボードのマトリックスの1行を使っている場合、キーコード全体をチェックする代わりに、`if (record->event.row == 3)` を使うほうが簡単かもしれません。これは、ホームキー行でタップホールドタイプのキーを使っている人にとって特に便利です。そのため、通常のタイピングを妨げないように微調整することができるのではないでしょうか。
+
+## `*_kb` や `*_user` 関数が無いのはなぜですか？
+
+QMK にある他の多くの関数とは異なり、quantum あるいはキーボードレベルの関数を持つ必要はありません (または理由さえありません)。ここではユーザレベルの関数だけが有用なため、そのようにマークする必要はありません。

docs/ja/understanding_qmk.md

@@ -0,0 +1,195 @@
+# QMK のコードの理解
+
+<!---
+  original document: 0.9.55:docs/understanding_qmk.md
+  git diff 0.9.55 HEAD -- docs/understanding_qmk.md | cat
+-->
+
+このドキュメントでは、QMK ファームウェアがどのように機能するかを非常に高いレベルから説明しようとしています。基本的なプログラミングの概念を理解していることを前提としていますが、(実例を示す必要がある場合を除き) C に精通していることを前提にはしていません。以下のドキュメントの基本的な知識があることを前提としています。
+
+* [入門](ja/getting_started_introduction.md)
+* [キーボードがどのように動作するか](ja/how_keyboards_work.md)
+* [FAQ](ja/faq.md)
+
+## スタートアップ
+
+QMK は他のコンピュータプログラムと何ら変わりないと考えることができます。開始され、タスクを実行し、そして終了します。プログラムのエントリーポイントは、他の C プログラムと同様に、`main()` 関数です。ただし、QMK を初めて触る人は、`main()` 関数が複数の場所に現れるため、混乱するかもしれません。また、どれを見ればよいか分かりにくいかもしれません。
+
+複数ある理由は、QMK は様々なプラットフォームをサポートするからです。最も一般的なプラットフォームは `lufa` です。これは atmega32u4 のような AVR プロセッサ上で実行されます。また、`chibios` および `vusb` もサポートします。
+
+ここでは AVR プロセッサに焦点を当てます。これは `lufa` プラットフォームを使います。`main()` 関数は [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1028) にあります。関数にざっと目を通すと、(ホストへの USB も含めて)設定された全てのハードウェアが初期化され、プログラムのコア部分が [`while(1)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1069) で開始されることが分かります。これが[メインループ](#the-main-loop)です。
+
+## メインループ
+
+コードのこの部分は、同じ命令セットを永久にループ処理するため、「メインループ」と呼ばれます。ここはキーボードに必要なことを実行させる関数を QMK が呼び出す場所です。一見、多くの機能を持つように見えるかもしれませんが、大抵の場合、コードは `#define` によって無効にされます。
+
+```
+    keyboard_task();
+```
+
+ここで、全てのキーボードの固有の機能が実行されます。`keyboard_task()` のソースコードは [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216) にあり、マトリックスの変化を検知し、LED の状態をオンオフする責任があります。
+
+`keyboard_task()` に以下を処理するコードがあります:
+
+* [マトリックスのスキャン](#matrix-scanning)
+* マウスの処理
+* シリアルリンク
+* ビジュアライザ
+* キーボードの状態の LED (Caps Lock, Num Lock, Scroll Lock)
+
+#### マトリックスのスキャン
+
+マトリックスのスキャンはキーボードファームウェアのコアの機能です。これは今どのキーが押されているかを検知するプロセスであり、キーボードはこの機能を1秒間に何度も何度も実行します。ファームウェアの CPU 時間の 99% はマトリックスのスキャンに費やされていると言っても過言ではありません。
+
+実際のマトリックスの検知には様々な方法がありますが、それはこのドキュメントの対象外です。マトリックスのスキャンをブラックボックスとして扱っても問題ありません。マトリックスの現在の状態を求めると、以下のようなデータ構造を取得します:
+
+
+```
+{
+    {0,0,0,0},
+    {0,0,0,0},
+    {0,0,0,0},
+    {0,0,0,0},
+    {0,0,0,0}
+}
+```
+
+これは 4行x5列のテンキー(訳注: 5行x4列の間違いと思われます)のマトリックスを表す直接的な表現のデータ構造です。キーが押されると、マトリックス内のそのキーの位置が、 `0` ではなく `1` として返されます。
+
+マトリックスのスキャンは1秒間に何度も実行されます。正確なレートは様々ですが、知覚できるような遅延を避けるために、秒間に少なくとも10回実行します。
+
+##### マトリックスから物理的なレイアウトへのマップ
+
+キーボード上の各スイッチの状態が分かると、それをキーコードへマップする必要があります。QMK ではキーコードへのマップは C マクロを使うことで行われ、C マクロにより物理的なレイアウトの定義はキーコードの定義から分離されています。(訳注：「キーコードの定義」は「キーコードのマトリクス配列による定義」と思われる)
+
+キーボードレベルで、キーボードのマトリックスを物理キーにマップする C マクロ (一般的には、`LAYOUT()` という名前)を定義します。マトリックスにスイッチがない場所がある場合、このマクロを使って KC_NO を事前に埋め込むことができ、キーマップの定義を扱いやすくすることができます。以下は、テンキー用の `LAYOUT()` マクロです:
+
+```c
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, \
+    k30, k31, k32, k33, \
+    k40,      k42 \
+) { \
+    { k00, k01, k02, k03, }, \
+    { k10, k11, k12, k13, }, \
+    { k20, k21, k22, KC_NO, }, \
+    { k30, k31, k32, k33, }, \
+    { k40, KC_NO, k42, KC_NO } \
+}
+```
+
+`LAYOUT()` マクロの2つ目のブロックが、上記のマトリックススキャン配列とどのように一致しているかに注目してください。このマクロはマトリックスのスキャン配列をキーコードにマップするものです。ただし、17キーのテンキーを見ると、マトリックスにはスイッチが置けるが、キーが大きいために実際にはスイッチが無い箇所が3つあることが分かります。これらのスペースに `KC_NO` を設定したので、キーマップ定義には必要ありません。
+
+このマクロを使って、少し変わったマトリックスのレイアウト、例えば [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/66/rev2/rev2.h) を扱うこともできます。その説明はこのドキュメントの範囲外です。
+
+##### キーコードの割り当て
+
+キーマップレべルでは、上記の `LAYOUT()` マクロを使って、物理的な場所からマトリックスの場所にマッピングします。以下のようになります:
+
+```
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT(
+  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+  KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
+  KC_P4,   KC_P5,   KC_P6, \
+  KC_P1,   KC_P2,   KC_P3,   KC_PENT, \
+  KC_P0,            KC_PDOT)
+}
+```
+
+これら全ての引数が、前のセクションの `LAYOUT()` マクロの前半とどのように一致しているかについて注目してください。このようにして、キーコードを取得して、それを前述のマトリックススキャンにマップします。
+
+##### 状態変更の検知
+
+上記のマトリックススキャンはある時点のマトリックスの状態を伝えますが、コンピュータは変更のみを知りたいだけで、現在の状態を気にしません。QMK は最後のマトリックススキャンの結果を格納し、このマトリックスから結果を比較して、いつキーが押されたか放されたかを決定します。
+
+例を見てみましょう。キーボードスキャンループの途中に移動して、前のスキャンが以下のようになっていることがわかったとします:
+
+```
+{
+    {0,0,0,0},
+    {0,0,0,0},
+    {0,0,0,0},
+    {0,0,0,0},
+    {0,0,0,0}
+}
+```
+
+現在のスキャンが完了すると、以下のように見えるとします:
+
+```
+{
+    {1,0,0,0},
+    {0,0,0,0},
+    {0,0,0,0},
+    {0,0,0,0},
+    {0,0,0,0}
+}
+```
+
+キーマップと比較すると、押されたキーが KC_NLCK であることが分かります。ここから、`process_record` 関数群を呼び出します。
+
+<!-- FIXME: Magic happens between here and process_record -->
+
+##### Process Record
+
+`process_record()` 関数自体は一見簡単に見えますが、その内部は QMK の様々なレベルで機能を上書きするためのゲートウェイが隠されています。キーボード/キーマップレベルの機能について調べる必要があるときは、以下に列挙した一連のイベントを手引帳として使います。`rules.mk` またはほかの場所で設定されたオプションに応じて、最終的なファームウェアに以下の関数のサブセットのみが含まれます。
+
+* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172)
+   * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206)
+      * [このレコードをキーコードにマップする](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226)
+      * [`void velocikey_accelerate(void)`](https://github.com/qmk/qmk_firmware/blob/c1c5922aae7b60b7c7d13d3769350eed9dda17ab/quantum/velocikey.c#L27)
+      * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119)
+      * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62)
+      * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79)
+      * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216)
+      * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20)
+         * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
+      * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139)
+      * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81)
+      * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19)
+      * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160)
+      * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114)
+      * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141)
+      * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169) は、以下のいずれかを呼び出します:
+         * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20)
+         * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46)
+         * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95)
+      * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51)
+      * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115)
+      * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77)
+      * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94)
+      * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264)
+      * [Quantum 固有のキーコードを識別して処理する](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291)
+
+この一連のイベントの中の任意のステップで (`process_record_kb()` のような)関数は `false` を返して、以降の処理を停止することができます。
+
+この呼び出しの後で、`post_process_record()` が呼ばれます。これはキーコードが通常処理された後に実行する必要がある追加のクリーンアップを処理するために使うことができます。
+
+* [`void post_process_record(keyrecord_t *record)`]()
+   * [`void post_process_record_quantum(keyrecord_t *record)`]()
+      * [このレコードをキーコードにマップする]()
+      * [`void post_process_clicky(uint16_t keycode, keyrecord_t *record)`]()
+      * [`void post_process_record_kb(uint16_t keycode, keyrecord_t *record)`]()
+         * [`void post_process_record_user(uint16_t keycode, keyrecord_t *record)`]()
+
+<!--
+#### Mouse Handling
+
+FIXME: This needs to be written
+
+#### Serial Link(s)
+
+FIXME: This needs to be written
+
+#### Visualizer
+
+FIXME: This needs to be written
+
+#### Keyboard state LEDs (Caps Lock, Num Lock, Scroll Lock)
+
+FIXME: This needs to be written
+
+-->

docs/ref_functions.md

@@ -43,7 +43,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 ### `update_tri_layer_state(state, x, y, z)`
 The other function is `update_tri_layer_state(state, x, y, z)`.  This function is meant to be called from the [`layer_state_set_*` functions](custom_quantum_functions.md#layer-change-code).  This means that any time that you use a keycode to change the layer, this will be checked.  So you could use `LT(layer, kc)` to change the layer and it will trigger the same layer check.
 
-The caveat to this method is that you cannot access the `z` layer without having `x` and `y` layers on, since if you try to activate just layer `z`, it will run this code and turn off layer `z` before you could use it.
+There are a couple of caveats to this method:
+1. You cannot access the `z` layer without having `x` and `y` layers on, since if you try to activate just layer `z`, it will run this code and turn off layer `z` before you could use it.
+2. Because layers are processed from the highest number `z` should be a higher layer than `x` and `y` or you may not be able to access it.
 
 #### Example
 
@@ -97,7 +99,7 @@ To wipe the EEPROM, run `eeconfig_init()` from your function or macro to reset m
 
 ## Tap random key
 
-If you want to send a random character to the host computer, you can use the `tap_random_base64()` function. This [pseudorandomly](https://en.wikipedia.org/wiki/Pseudorandom_number_generator) selects a number between 0 and 63, and then sends a key press based on that selection. (0–25 is `A`–`Z`, 26–51 is `a`–`z`, 52–61 is `0`–`9`, 62 is `+` and 63 is `/`).  
+If you want to send a random character to the host computer, you can use the `tap_random_base64()` function. This [pseudorandomly](https://en.wikipedia.org/wiki/Pseudorandom_number_generator) selects a number between 0 and 63, and then sends a key press based on that selection. (0–25 is `A`–`Z`, 26–51 is `a`–`z`, 52–61 is `0`–`9`, 62 is `+` and 63 is `/`).
 
 ?> Needless to say, but this is _not_ a cryptographically secure method of generating random Base64 keys or passwords.
 

docs/tap_hold.md

@@ -1,22 +1,22 @@
 # Tap-Hold Configuration Options
 
-While Tap-Hold options are fantastic, they are not without their issues.  We have tried to configure them with reasonable defaults, but that may still cause issues for some people. 
+While Tap-Hold options are fantastic, they are not without their issues.  We have tried to configure them with reasonable defaults, but that may still cause issues for some people.
 
 These options let you modify the behavior of the Tap-Hold keys.
 
 ## Tapping Term
 
-The crux of all of the following features is the tapping term setting.  This determines what is a tap and what is a hold.  And the exact timing for this to feel natural can vary from keyboard to keyboard, from switch to switch, and from key to key.  
+The crux of all of the following features is the tapping term setting.  This determines what is a tap and what is a hold.  And the exact timing for this to feel natural can vary from keyboard to keyboard, from switch to switch, and from key to key.
 
-You can set the global time for this by adding the following setting to your `config.h`: 
+You can set the global time for this by adding the following setting to your `config.h`:
 
 ```c
 #define TAPPING_TERM 200
 ```
 
-This setting is defined in milliseconds, and does default to 200ms.  This is a good average for a majority of people. 
+This setting is defined in milliseconds, and does default to 200ms.  This is a good average for a majority of people.
 
-For more granular control of this feature, you can add the following to your `config.h`: 
+For more granular control of this feature, you can add the following to your `config.h`:
 ```c
 #define TAPPING_TERM_PER_KEY
 ```
@@ -45,9 +45,9 @@ As of [PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/), there is a new
 #define PERMISSIVE_HOLD
 ```
 
-This makes tap and hold keys (like Mod Tap) work better for fast typists, or for high `TAPPING_TERM` settings. 
+This makes tap and hold keys (like Mod Tap) work better for fast typists, or for high `TAPPING_TERM` settings.
 
-If you press a Mod Tap key, tap another key (press and release) and then release the Mod Tap key, all within the tapping term, it will output the "tapping" function for both keys.
+If you press a Mod Tap key, tap another key (press and release) and then release the Mod Tap key, all within the tapping term, it will output the tapping function for both keys.
 
 For Instance:
 
@@ -56,7 +56,7 @@ For Instance:
 - `KC_X` Up
 - `SFT_T(KC_A)` Up
 
-Normally, if you do all this within the `TAPPING_TERM` (default: 200ms) this will be registered as `ax` by the firmware and host system. With permissive hold enabled, this modifies how this is handled by considering the Mod Tap keys as a Mod if another key is tapped, and would registered as `X` (`SHIFT`+`x`). 
+Normally, if you do all this within the `TAPPING_TERM` (default: 200ms) this will be registered as `ax` by the firmware and host system. With permissive hold enabled, this modifies how this is handled by considering the Mod Tap keys as a Mod if another key is tapped, and would registered as `X` (`SHIFT`+`x`).
 
 ?> If you have `Ignore Mod Tap Interrupt` enabled, as well, this will modify how both work. The regular key has the modifier added if the first key is released first or if both keys are held longer than the `TAPPING_TERM`.
 
@@ -87,7 +87,7 @@ To enable this setting, add this to your `config.h`:
 #define IGNORE_MOD_TAP_INTERRUPT
 ```
 
-Similar to Permissive Hold, this alters how the firmware processes inputs for fast typists. If you press a Mod Tap key, press another key, release the Mod Tap key, and then release the normal key, it would normally output the "tapping" function for both keys. This may not be desirable for rolling combo keys. 
+Similar to Permissive Hold, this alters how the firmware processes inputs for fast typists. If you press a Mod Tap key, press another key, release the Mod Tap key, and then release the normal key, it would normally output the tapping function for both keys. This may not be desirable for rolling combo keys.
 
 Setting `Ignore Mod Tap Interrupt` requires  holding both keys for the `TAPPING_TERM` to trigger the hold function (the mod).
 
@@ -126,27 +126,27 @@ bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) {
 
 ## Tapping Force Hold
 
-To enable `tapping force hold`, add the following to your `config.h`: 
+To enable `tapping force hold`, add the following to your `config.h`:
 
 ```c
 #define TAPPING_FORCE_HOLD
 ```
 
-When the user holds a key after tap, this repeats the tapped key rather to hold a modifier key.  This allows to use auto repeat for the tapped key.  
+When the user holds a key after tapping it, the tapping function is repeated by default, rather than activating the hold function. This allows keeping the ability to auto-repeat the tapping function of a dual-role key. `TAPPING_FORCE_HOLD` removes that ability to let the user activate the hold function instead, in the case of holding the dual-role key after having tapped it.
 
 Example:
 
-- SFT_T(KC_A) Down
-- SFT_T(KC_A) Up
-- SFT_T(KC_A) Down
-- wait more than tapping term...
-- SFT_T(KC_A) Up
+- `SFT_T(KC_A)` Down
+- `SFT_T(KC_A)` Up
+- `SFT_T(KC_A)` Down
+- wait until the tapping term expires...
+- `SFT_T(KC_A)` Up
 
 With default settings, `a` will be sent on the first release, then `a` will be sent on the second press allowing the computer to trigger its auto repeat function.
 
 With `TAPPING_FORCE_HOLD`, the second press will be interpreted as a Shift, allowing to use it as a modifier shortly after having used it as a tap.
 
-!> `TAPPING_FORCE_HOLD` will break anything that uses tapping toggles (Such as the `TT` layer keycode, and the One Shot Tapping Toggle).
+!> `TAPPING_FORCE_HOLD` will break anything that uses tapping toggles (Such as the `TT` layer keycode, and the One Shot Tap Toggle).
 
 For more granular control of this feature, you can add the following to your `config.h`:
 
@@ -169,7 +169,7 @@ bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) {
 
 ## Retro Tapping
 
-To enable `retro tapping`, add the following to your `config.h`: 
+To enable `retro tapping`, add the following to your `config.h`:
 
 ```c
 #define RETRO_TAPPING
@@ -179,11 +179,11 @@ Holding and releasing a dual function key without pressing another key will resu
 
 For instance, holding and releasing `LT(2, KC_SPACE)` without hitting another key will result in nothing happening. With this enabled, it will send `KC_SPACE` instead.
 
-## Why do we include the key record for the per key functions? 
+## Why do we include the key record for the per key functions?
 
-One thing that you may notice is that we include the key record for all of the "per key" functions, and may be wondering why we do that. 
+One thing that you may notice is that we include the key record for all of the "per key" functions, and may be wondering why we do that.
 
-Well, it's simply really: customization.  But specifically, it depends on how your keyboard is wired up.  For instance, if each row is actually using a row in the keyboard's matrix, then it may be simpler to use `if (record->event.row == 3)` instead of checking a whole bunch of keycodes.  Which is especially good for those people using the Tap Hold type keys on the home row. So you could fine tune those to not interfere with your normal typing. 
+Well, it's simple really: customization.  But specifically, it depends on how your keyboard is wired up.  For instance, if each row is actually using a row in the keyboard's matrix, then it may be simpler to use `if (record->event.row == 3)` instead of checking a whole bunch of keycodes.  Which is especially good for those people using the Tap Hold type keys on the home row. So you could fine tune those to not interfere with your normal typing.
 
 ## Why is there no `*_kb` or `*_user` functions?!
 

drivers/avr/ssd1306.c

@@ -11,6 +11,8 @@
 #    include "sendchar.h"
 #    include "timer.h"
 
+struct CharacterMatrix display;
+
 // Set this to 1 to help diagnose early startup problems
 // when testing power-on with ble.  Turn it off otherwise,
 // as the latency of printing most of the debug info messes

drivers/avr/ssd1306.h

@@ -66,7 +66,7 @@ struct CharacterMatrix {
     bool     dirty;
 };
 
-struct CharacterMatrix display;
+extern struct CharacterMatrix display;
 
 bool iota_gfx_init(void);
 void iota_gfx_task(void);

drivers/oled/oled_driver.c

@@ -534,6 +534,8 @@ bool oled_off(void) {
     return !oled_active;
 }
 
+bool is_oled_on(void) { return oled_active; }
+
 // Set the specific 8 lines rows of the screen to scroll.
 // 0 is the default for start, and 7 for end, which is the entire
 // height of the screen.  For 128x32 screens, rows 4-7 are not used.

drivers/oled/oled_driver.h

@@ -257,6 +257,10 @@ bool oled_on(void);
 // Returns true if the screen was off or turns off
 bool oled_off(void);
 
+// Returns true if the oled is currently on, false if it is
+// not
+bool is_oled_on(void);
+
 // Basically it's oled_render, but with timeout management and oled_task_user calling!
 void oled_task(void);
 

keyboards/1upkeyboards/1up60hte/keymaps/badger/keymap.c

@@ -0,0 +1,59 @@
+/*
+Copyright 2020 Dan White <opensource@bluetufa.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "badger.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY_MAC]  = LAYOUT_tsangan(\
+     KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC, KC_DEL, \
+     KC_TAB,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS, \
+     MOVE_MAC,   KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT,   \
+     KC_LSFT,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   CFG_MAC, \
+     KC_LCTL,    KC_LALT,  KC_LGUI,  KC_SPC,   ADJUST,   KC_RALT,  KC_RGUI),
+
+  [_MOVE_MAC]    = LAYOUT_tsangan(\
+     MAC_FRC,    MM_LEFT,  MM_RGHT,  KC_HASH,  KC_DLR,   KC_PERC,  KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_0,     IJ_TOP,    IJ_BOTT,  _______, _______, \
+     KC_BACK,    IJ_STEP,  IJ_INTO,  IJ_OUT,   IJ_RUN,   IJ_STOP,  _______,  WD_BACK,  KC_HOME,  KC_END,   WD_FRWD,  IJ_BACK,   IJ_FWD,   KC_NEXT, \
+     _______,    MM_LH,    MM_MAX,   MM_RH,    IJ_FIND,  IJ_IMPS,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CM_RIGHT, CM_DOWN,   _______,  \
+     _______,    MM_UH,    MM_BH,    MAC_CPY,  MAC_PST,  IJ_IMPH,  _______,  IJ_REN,   IJ_IMPL,  IJ_DECL,  IJ_USAG,  _______,   _______,  \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______),
+
+  [_QWERTY_LINUX] = LAYOUT_tsangan(\
+     KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC, KC_DEL, \
+     KC_TAB,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS, \
+     MOVE,       KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT,   \
+     KC_LSFT,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   CFG_LNX, \
+     KC_LCTL,    KC_LGUI,  KC_LALT,  KC_SPC,   ADJUST,   KC_RALT,  KC_RGUI),
+
+  [_MOVE_LINUX] = LAYOUT_tsangan(\
+     KC_GRV,     VD_1,     VD_2,     KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   _______, _______, \
+     KC_BACK,    WM_VD1,   WM_UH,    WM_VD2,   RESET,    KC_MSTP,  KC_MPLY,  KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  _______,   _______,  KC_NEXT, \
+     _______,    WM_LH,    WM_MAX,   WM_RH,    WD_FRWD,  _______,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CS_RIGHT, CS_DOWN,   _______, \
+     _______,    WM_VD3,   WM_BH,    OS_COPY,  OS_PAST,  WD_BACK,  KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  _______,  _______,   _______, \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______),
+
+  [_ADJUST]     = LAYOUT_tsangan(\
+     KC_ESC,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   _______, _______, \
+     _______,   _______,  _______,  _______,  KC_WREF,   KC_MSTP,  KC_MPLY,  KC_PGUP,  _______,  _______,  KC_PGDN,  KC_VOLD,   KC_VOLU,  KC_INS, \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  \
+     _______,   _______,  _______,  KC_CAPS,  _______,   KC_MPRV,  KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  KC_WSCH,  _______,   _______,  \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______),
+
+  [_CONFIG]     = LAYOUT_tsangan(\
+     _______,   KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   _______, _______, \
+     _______,   NK_ON,    NK_OFF,   EEP_RST,  RESET,     _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  KC_INS, \
+     _______,   GE_SWAP,  GE_NORM,  DEBUG,    RGB_MOD,   RGB_HUI,  RGB_SAI,  RGB_SPI,  RGB_M_B,  _______,  _______,  RGB_TOG,   _______,  \
+     _______,   DF_1,     DF_2,     _______,  RGB_RMOD,  RGB_HUD,  RGB_SAD,  RGB_SPD,  RGB_M_K,  _______,  _______,  _______,   _______,  \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______)
+};

keyboards/1upkeyboards/1up60rgb/1up60rgb.h

@@ -33,6 +33,21 @@
     { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
 }
 
+/* ANSI-Tsangan variant, with split right shift key */
+#define LAYOUT_60_ansi_tsangan_split_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
+    k40, k41,      k43,           k46,                     k4B,      k4D, k4E \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0D }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, XXX }, \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, XXX, k4D, k4E } \
+}
+
 /* ISO variant. Remove useless ANSI keys */
 #define LAYOUT_60_iso( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
@@ -63,6 +78,21 @@
     { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
 }
 
+/* ANSI Variant */
+#define LAYOUT_60_ansi_split_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E  \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0D }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, XXX }, \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
+}
+
 /* HHKB Variant */
 #define LAYOUT_60_hhkb( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \

keyboards/1upkeyboards/1up60rgb/info.json

@@ -6,22 +6,68 @@
   "height": 5,
   "layouts": {
     "LAYOUT_all": {
-      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      "layout": [
+        {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
     },
 
     "LAYOUT_60_ansi": {
-      "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
+      "layout": [
+        {"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, 
+        {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, 
+        {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, 
+        {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, 
+        {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
     },
 
     "LAYOUT_60_iso": {
-      "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      "layout": [
+        {"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, 
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, 
+        {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
     },
 
     "LAYOUT_60_ansi_split_bs_rshift": {
-      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      "layout": [
+        {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
     },
+
+    "LAYOUT_60_ansi_split_rshift": {
+      "layout": [
+        {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0, "w":2}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Esc", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Alt", "x":1.25, "y":4, "w": 1.25}, {"label":"Gui", "x":2.5, "y":4, "w":1.25}, {"label": "Space", "x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4, "w":1.25}, {"label":"Gui", "x":11.25, "y":4, "w": 1.25}, {"label":"Alt", "x":12.5, "y":4, "w": 1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+      ]
+    },
+
+    "LAYOUT_60_ansi_tsangan_split_rshift": {
+      "layout": [
+        {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label": "Bksp", "x":13, "y":0, "w":2}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Esc", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label": "Alt Gr", "x":14, "y":3}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4}, {"label":"GUI", "x":2.5, "y":4, "w":1.5}, {"label":"space", "x":4, "y":4, "w":7}, {"label":"Fn", "x":11, "y":4, "w":1.5}, {"label":"Alt", "x":12.5, "y":4}, {"label":"GUI", "x":13.5, "y":4, "w": 1.5}
+      ]
+    },
+
     "LAYOUT_60_hhkb": {
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
+      "layout": [
+        {"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, 
+        {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
     }
   }
 }

keyboards/1upkeyboards/1up60rgb/keymaps/badger/keymap.c

@@ -0,0 +1,59 @@
+/*
+Copyright 2020 Dan White <opensource@bluetufa.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "badger.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY_MAC]  = LAYOUT_60_ansi_tsangan_split_rshift(\
+     KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC, \
+     KC_TAB,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS, \
+     MOVE_MAC,   KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT,   \
+     KC_LSFT,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   CFG_MAC,  \
+     KC_LCTL,    KC_LALT,  KC_LGUI,  KC_SPC,   ADJUST,   KC_RALT,  KC_RGUI),
+
+  [_MOVE_MAC]   = LAYOUT_60_ansi_tsangan_split_rshift(\
+     MAC_FRC,    MM_LEFT,  MM_RGHT,  KC_HASH,  KC_DLR,   KC_PERC,  KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_0,     IJ_TOP,    IJ_BOTT,  KC_DEL, \
+     KC_BACK,    IJ_STEP,  IJ_INTO,  IJ_OUT,   IJ_RUN,   IJ_STOP,  _______,  WD_BACK,  KC_HOME,  KC_END,   WD_FRWD,  IJ_BACK,   IJ_FWD,   KC_NEXT, \
+     _______,    MM_LH,    MM_MAX,   MM_RH,    IJ_FIND,  IJ_IMPS,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CM_RIGHT, CM_DOWN,   _______,  \
+     _______,    MM_UH,    MM_BH,    MAC_CPY,  MAC_PST,  IJ_IMPH,  _______,  IJ_REN,   IJ_IMPL,  IJ_DECL,  IJ_USAG,  _______,   _______,  \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______),
+     
+  [_QWERTY_LINUX] = LAYOUT_60_ansi_tsangan_split_rshift(\
+     KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC, \
+     KC_TAB,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS, \
+     MOVE,       KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT,   \
+     KC_LSFT,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   CFG_LNX,  \
+     KC_LCTL,    KC_LGUI,  KC_LALT,  KC_SPC,   ADJUST,   KC_LALT,  KC_RGUI),
+
+  [_MOVE_LINUX]  = LAYOUT_60_ansi_tsangan_split_rshift(\
+     KC_GRV,     VD_1,     VD_2,     VD_3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   KC_DEL, \
+     KC_BACK,    WM_VD1,   WM_UH,    WM_VD2,   RESET,    KC_MSTP,  KC_MPLY,  KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  _______,   _______,  KC_NEXT, \
+     _______,    WM_LH,    WM_MAX,   WM_RH,    WD_FRWD,  _______,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CS_RIGHT, CS_DOWN,   _______, \
+     _______,    WM_VD3,   WM_BH,    OS_COPY,  OS_PAST,  WD_BACK,  KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  _______,  _______,   _______, \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______),
+
+  [_ADJUST]     = LAYOUT_60_ansi_tsangan_split_rshift(\
+     KC_ESC,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   KC_DEL, \
+     _______,   _______,  _______,  _______,  KC_WREF,   KC_MSTP,  KC_MPLY,  KC_PGUP,  _______,  _______,  KC_PGDN,  KC_VOLD,   KC_VOLU,  KC_INS, \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  \
+     _______,   DF_1,     DF_2,     KC_CAPS,  _______,   KC_MPRV,  KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  KC_WSCH,  _______,   _______,  \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______),
+
+  [_CONFIG]     = LAYOUT_60_ansi_tsangan_split_rshift(\
+     _______,   KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   KC_DEL, \
+     _______,   NK_ON,    NK_OFF,   EEP_RST,  RESET,     _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  KC_INS, \
+     _______,   GE_SWAP,  GE_NORM,  DEBUG,    RGB_MOD,   RGB_HUI,  RGB_SAI,  RGB_SPI,  RGB_M_B,  _______,  _______,  RGB_TOG,   _______,  \
+     _______,   LAG_SWP,  LAG_NRM,  _______,  RGB_RMOD,  RGB_HUD,  RGB_SAD,  RGB_SPD,  RGB_M_K,  _______,  _______,  _______,   _______, \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______)
+};
+

keyboards/40percentclub/mf68/keymaps/delivrance/config.h

@@ -0,0 +1,42 @@
+/*
+ * Dan's Magicforce 68 (MF68) QMK Keyboard
+ * Copyright (C) Dan <https://github.com/delivrance>
+ *
+ * This file is part of Dan's MF68 QMK Keyboard.
+ *
+ * Dan's MF68 QMK Keyboard is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Dan's MF68 QMK Keyboard is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Dan's MF68 QMK Keyboard.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#undef MANUFACTURER
+#define MANUFACTURER Dan
+
+#undef PRODUCT
+#define PRODUCT Magicforce 68 QMK
+
+#undef BACKLIGHT_LEVELS
+#define BACKLIGHT_LEVELS 20
+
+// Disable backlight breathing
+#undef BACKLIGHT_BREATHING
+
+// Set USB polling rate to 1000 Hz
+#define USB_POLLING_INTERVAL_MS 1
+
+// Enable NKRO on boot
+#define FORCE_NKRO
+
+// Backlight idle timeout in seconds
+#define BACKLIGHT_IDLE_TIMEOUT 1200

keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c

@@ -0,0 +1,232 @@
+/*
+ * Dan's Magicforce 68 (MF68) QMK Keyboard
+ * Copyright (C) Dan <https://github.com/delivrance>
+ *
+ * This file is part of Dan's MF68 QMK Keyboard.
+ *
+ * Dan's MF68 QMK Keyboard is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Dan's MF68 QMK Keyboard is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Dan's MF68 QMK Keyboard.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define KC_ KC_TRNS
+
+#define KC_FN1 MO(_FN)
+#define KC_FN2 LT(_FN, KC_CAPS)
+
+#define KC_BLUP BL_INC   // Backlight increase
+#define KC_BLDN BL_DEC   // Backlight decrease
+#define KC_BLTOG BL_TOGG // Backlight toggle
+#define KC_TERM TERM_ON  // Terminal mode on
+#define KC_REC1 DM_REC1  // Record macro 1
+#define KC_PLY1 DM_PLY1  // Play macro 1
+#define KC_REC2 DM_REC2  // Record macro 2
+#define KC_PLY2 DM_PLY2  // Play macro 1
+#define KC_RSTP DM_RSTP  // Stop macro recording
+
+enum {
+    _QWERTY,
+    _FN
+};
+
+/* ┏━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━━━━━┓ ┏━━━━┳━━━━┓
+   ┃Esc ┃ 1! ┃ 2@ ┃ 3# ┃ 4$ ┃ 5% ┃ 6^ ┃ 7& ┃ 8* ┃ 9( ┃ 0) ┃ -_ ┃ =+ ┃   ←─   ┃ ┃Ins ┃PgUp┃
+   ┣━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━━━━━┫ ┣━━━━╋━━━━┫
+   ┃ Tab  ┃ Q  ┃ W  ┃ E  ┃ R  ┃ T  ┃ Y  ┃ U  ┃ I  ┃ O  ┃ P  ┃ [{ ┃ ]} ┃  \|  ┃ ┃Del ┃PgDn┃
+   ┣━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━┫ ┗━━━━┻━━━━┛
+   ┃  Caps  ┃ A  ┃ S  ┃ D  ┃ F  ┃ G  ┃ H  ┃ J  ┃ K  ┃ L  ┃ ;: ┃ '" ┃  Enter  ┃  Magicforce
+   ┣━━━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━━━━┫ ┏━━━━┓
+   ┃   Shift  ┃ Z  ┃ X  ┃ C  ┃ V  ┃ B  ┃ N  ┃ M  ┃ ,< ┃ .> ┃ /? ┃    Shift   ┃ ┃ ↑  ┃ Dan
+   ┣━━━━━┳━━━━┻┳━━━┻━┳━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━┳┻━━━━╋━━━━┻┳━━━━━┳━━┳━━┻━╋━━━━╋━━━━┓
+   ┃Ctrl ┃ GUI ┃ Alt ┃             ━━━━━             ┃ Alt ┃ Fn  ┃Ctrl ┃  ┃ ←  ┃ ↓  ┃ →  ┃
+   ┗━━━━━┻━━━━━┻━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┻━━━━━┻━━━━━┻━━━━━┛  ┗━━━━┻━━━━┻━━━━┛ */
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_QWERTY] = LAYOUT_kc( /* Default layer
+   ┏━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━━━━━┓ ┏━━━━┳━━━━┓ */
+    GESC, 1  , 2  , 3  , 4  , 5  , 6  , 7  , 8  , 9  , 0  ,MINS,EQL ,  BSPC  ,  INS ,PGUP, /*
+   ┣━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━━━━━┫ ┣━━━━╋━━━━┫ */
+     TAB  , Q  , W  , E  , R  , T  , Y  , U  , I  , O  , P  ,LBRC,RBRC, BSLS ,  DEL ,PGDN, /*
+   ┣━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━┫ ┗━━━━┻━━━━┛ */
+      FN2   , A  , S  , D  , F  , G  , H  , J  , K  , L  ,SCLN,QUOT,  ENTER  ,             /*
+   ┣━━━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━━━━┫ ┏━━━━┓      */
+       LSFT   , Z  , X  , C  , V  , B  , N  , M  ,COMM,DOT ,SLSH,    RSFT    ,   UP ,      /*
+   ┣━━━━━┳━━━━┻┳━━━┻━┳━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━┳┻━━━━╋━━━━┻┳━━━━━┳━━┳━━┻━╋━━━━╋━━━━┓ */
+    LCTL ,LGUI ,LALT ,             SPACE             ,RALT , FN1 ,RCTL ,   LEFT,DOWN,RGHT  /*
+   ┗━━━━━┻━━━━━┻━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┻━━━━━┻━━━━━┻━━━━━┛  ┗━━━━┻━━━━┻━━━━┛ */),
+
+[_FN] = LAYOUT_kc( /* FN & CAPS layer
+   ┏━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━━━━━┓ ┏━━━━┳━━━━┓ */
+    GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 , F10, F11, F12,  RSTP  ,  PSCR,HOME, /*
+   ┣Esc ┻ 1! ┻ 2@ ┻ 3# ┻ 4$ ┻ 5% ┻ 6^ ┻ 7& ┻ 8* ┻ 9( ┻ 0) ┻ -_ ┻ =+ ┻━┳━ ←─ ━┫ ┣Ins ╋PgUp┫ */
+          ,PLY1,PLY2,    ,    ,    ,    ,    , 7  , 8  , 9  ,BLDN,BLUP,BLTOG ,      ,END , /*
+   ┣ Tab ━┻ Q ━┻ W ━┻ E ━┻ R ━┻ T ━┻ Y ━┻ U ━┻ I ━┻ O ━┻ P ━┻ [{ ┻ ]} ┻━ \| ━┫ ┗Del ┻PgDn┛ */
+            ,    ,    ,    ,    ,    ,    ,    , 4  , 5  , 6  ,    ,   TERM  ,             /*
+   ┣━ Caps ━┻ A ━┻ S ━┻ D ━┻ F ━┻ G ━┻ H ━┻ J ━┻ K ━┻ L ━┻ ;: ┻ '" ┻━ Enter ━┫ ┏━━━━┓      */
+              ,REC1,REC2,    ,    ,MSTP,    ,MUTE, 1  , 2  , 3  ,            ,  VOLU,      /*
+   ┣━━ Shift ━┻ Z ━┻ X ━┻ C ━┻ V ━┻ B ━┻ N ━┻ M ━┻ ,< ┻ .> ╋ /? ┻┳━━ Shift ━━┻━╋ ↑ ━╋━━━━┓ */
+         ,     ,     ,             MPLY              ,  0  ,     ,     ,   MPRV,VOLD,MNXT  /*
+   ┗Ctrl ┻ GUI ┻ Alt ┻━━━━━━━━━━━━ Space ━━━━━━━━━━━━┻ Alt ┻ Fn ━┻Ctrl ┛  ┗ ← ━┻ ↓ ━┻ → ━┛ */)
+};
+// clang-format on
+
+// Initialization code
+// -------------------
+
+void keyboard_post_init_user(void) {
+    backlight_level(2);
+}
+
+// Custom backlight driver
+// -----------------------
+
+// http://jared.geek.nz/2013/feb/linear-led-pwm
+float cie1931(float x) {
+    x *= 100.0 / BACKLIGHT_LEVELS;
+    float y;
+
+    if (x < 8) {
+        y = x / 902.3;
+    } else {
+        y = (x + 16.0) / 116.0;
+        y = y * y * y;
+    }
+
+    return round(y * 255);
+}
+
+void backlight_init_ports(void) {
+    setPinOutput(BACKLIGHT_PIN);
+    writePinLow(BACKLIGHT_PIN);
+
+    TCCR1A = _BV(COM1A1) | _BV(WGM11);
+    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10);
+
+    ICR1 = 0xFFU;  // Set PWM levels to 255 (enables high-frequency PWM)
+}
+
+void backlight_set(uint8_t level) {
+    if (level > BACKLIGHT_LEVELS) {
+        level = BACKLIGHT_LEVELS;
+    }
+
+    if (level == 0) {
+        TCCR1A &= ~(_BV(COM1A1));  // Disable PWM
+    } else {
+        TCCR1A |= _BV(COM1A1);  // Enable PWM
+    }
+
+    OCR1A = cie1931(level);
+}
+
+// Custom macro hooks
+// ------------------
+
+// Redefine with lower delay
+void led_blink(void) {
+    backlight_toggle();
+    wait_ms(25);
+    backlight_toggle();
+}
+
+void dynamic_macro_record_start_user(void) {
+    led_blink();
+}
+
+void dynamic_macro_play_user(int8_t direction) {
+    led_blink();
+}
+
+void dynamic_macro_record_key_user(int8_t direction, keyrecord_t *record) {
+    led_blink();
+}
+
+void dynamic_macro_record_end_user(int8_t direction) {
+    led_blink();
+}
+
+// Custom Caps Lock backlight behaviour
+// ------------------------------------
+
+void led_set_user(uint8_t usb_led) {
+    // This exists because I don't like the backlight to turn OFF when the Caps Lock is ON.
+    // That is, this will turn the backlight ON (at half the brightness) when the Caps Lock is ON as well.
+    static bool prev_is_caps_on;
+    bool is_caps_on = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK);
+
+    if (prev_is_caps_on != is_caps_on) {
+        prev_is_caps_on = is_caps_on;
+
+        if (is_caps_on) {
+            backlight_set(BACKLIGHT_LEVELS / 2);
+        } else {
+            if (is_backlight_enabled()) {
+                backlight_set(get_backlight_level());
+            } else {
+                backlight_set(0);
+            }
+        }
+    }
+
+    // Turn on the Pro Micro's on-board LEDs for Caps Lock
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        // Set to low
+        setPinOutput(B0);
+        writePinLow(B0);
+        setPinOutput(D5);
+        writePinLow(D5);
+    } else {
+        // Set to Hi-Z
+        setPinInput(B0);
+        setPinInput(D5);
+    }
+}
+
+// Backlight idle timeout feature
+// ------------------------------
+
+static uint32_t timer;
+static bool is_idle;
+
+void matrix_scan_user() {
+    // Check the timer only if the keyboard is not idle
+    if (!is_idle) {
+        if (timer_elapsed32(timer) >= (uint32_t) BACKLIGHT_IDLE_TIMEOUT * 1000) {
+            is_idle = true;
+
+            // Both backlight_level and backlight_level_noeeprom modify the global backlight config (not useful)
+            // Instead, use backlight_set in order to restore the current backlight level later on
+            backlight_set(0);
+        }
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    // Reset timer on each keypress
+    timer = timer_read32();
+
+    // Enable backlight back only when keyboard is idling (which implies the backlight was turned off previously)
+    if (is_idle) {
+        is_idle = false;
+
+        // Set back the original backlight level only if it is actually enabled globally
+        if (is_backlight_enabled()) {
+            // The current backlight level can be obtained with get_backlight_level
+            backlight_set(get_backlight_level());
+        }
+    }
+
+    return true;
+}

keyboards/40percentclub/mf68/keymaps/delivrance/readme.md

@@ -0,0 +1,38 @@
+# Dan's Magicforce 68 (MF68) QMK Keyboard
+
+> https://github.com/delivrance
+
+```
+┏━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━━━━━┓ ┏━━━━┳━━━━┓
+┃Esc ┃ 1! ┃ 2@ ┃ 3# ┃ 4$ ┃ 5% ┃ 6^ ┃ 7& ┃ 8* ┃ 9( ┃ 0) ┃ -_ ┃ =+ ┃   ←─   ┃ ┃Ins ┃PgUp┃
+┣━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━━━━━┫ ┣━━━━╋━━━━┫
+┃ Tab  ┃ Q  ┃ W  ┃ E  ┃ R  ┃ T  ┃ Y  ┃ U  ┃ I  ┃ O  ┃ P  ┃ [{ ┃ ]} ┃  \|  ┃ ┃Del ┃PgDn┃
+┣━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━┫ ┗━━━━┻━━━━┛
+┃  Caps  ┃ A  ┃ S  ┃ D  ┃ F  ┃ G  ┃ H  ┃ J  ┃ K  ┃ L  ┃ ;: ┃ '" ┃  Enter  ┃  Magicforce
+┣━━━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━━━━┫ ┏━━━━┓
+┃   Shift  ┃ Z  ┃ X  ┃ C  ┃ V  ┃ B  ┃ N  ┃ M  ┃ ,< ┃ .> ┃ /? ┃    Shift   ┃ ┃ ↑  ┃ Dan
+┣━━━━━┳━━━━┻┳━━━┻━┳━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━┳┻━━━━╋━━━━┻┳━━━━━┳━━┳━━┻━╋━━━━╋━━━━┓
+┃Ctrl ┃ GUI ┃ Alt ┃             ━━━━━             ┃ Alt ┃ Fn  ┃Ctrl ┃  ┃ ←  ┃ ↓  ┃ →  ┃
+┗━━━━━┻━━━━━┻━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┻━━━━━┻━━━━━┻━━━━━┛  ┗━━━━┻━━━━┻━━━━┛
+```
+
+## Features
+
+- Right ALT and FN keys swapped.
+- USB Polling rate set to 1000 Hz (1 ms).
+- Dynamic macros enabled (2 macros).
+- Transient EEPROM to avoid wearing (r/w from/to RAM).
+- NKRO enabled on boot (up to 248 keys at once).
+- CAPS LOCK key used as alias to the FN key.
+- Pro Micro's on-board LEDs used for CAPS LOCK status.
+- Backlight also used as CAPS LOCK status indicator.
+- Both Grave and Tilde characters embedded in ESC.
+- Media control keys and extra number keys (numpad).
+- Flicker-free backlight thanks to high-frequency PWM mode.
+- Linear backlight brightness intensity (better for human eyes).
+- Backlight turns off automatically after 20 minutes idle.
+- Backlight brightness levels set to 20 (5% steps) + 1 (off).
+- Backlight breathing completely disabled.
+- Link Time Optimizations to reduce compiled size.
+- QMK Terminal enabled for fun (pretty useless in practice).
+- Performing ~1550 matrix scans per second.

keyboards/40percentclub/mf68/keymaps/delivrance/rules.mk

@@ -0,0 +1,10 @@
+BACKLIGHT_DRIVER = custom
+NKRO_ENABLE = yes
+TERMINAL_ENABLE = yes
+DYNAMIC_MACRO_ENABLE = yes
+
+# Use RAM (fake EEPROM, transient) instead of real EEPROM
+EEPROM_DRIVER = transient
+
+# LTO: Link Time Optimizations. Reduce compiled size
+LTO_ENABLE = yes

keyboards/ai03/soyuz/config.h

@@ -21,11 +21,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xA103
-#define PRODUCT_ID      0x0004
+#define PRODUCT_ID      0x0018
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    ai03 Design Studio
 #define PRODUCT         Soyuz
-#define DESCRIPTION     Single-PCB Numpad Kit
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -118,59 +117,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP_ALT       SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER0_ALT     GRAVE
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -189,29 +135,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c

@@ -1,9 +1,31 @@
+/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com).
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+
 #include QMK_KEYBOARD_H
 
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_numpad_5x4(KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-                          KC_P7, KC_P8, KC_P9,
-				          KC_P4, KC_P5, KC_P6, KC_PPLS,
-				          KC_P1, KC_P2, KC_P3,
-				          KC_P0, KC_PDOT, KC_PENT)
+enum layer_names {
+    _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_numpad_5x4(
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,
+                 KC_P0,   KC_PDOT, KC_PENT
+    )
 };

keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md

@@ -1,6 +1,14 @@
-# [Sendy YK's Keymap](https://github.com/mrsendyyk/my_qmk/tree/master/ai03_soyuz_numpad)
+# Sendy YK's Numpad 5x4 Layout and Keymap
 
-![Default Layer [0]](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/ai03_soyuz_numpad/assets/ai03_soyuz_mrsendyyk.png)
+[https://mr.sendyyk.com](https://mr.sendyyk.com)
+
+## Numpad 5x4 Layout
+
+![LAYOUT_numpad_5x4](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/soyuz/assets/layout-numpad-5x4.png)
+
+## Keymap
+
+![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/soyuz/assets/layout-numpad-5x4-keymap.png)
 
 ## Build The Firmware
 

keyboards/ai03/soyuz/keymaps/via/keymap.c

@@ -0,0 +1,59 @@
+/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com).
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE, // Default Layer
+    _FN, // Fn Layer 1
+    _FN2, // Fn Layer 2
+    _FN3 // Fn Layer 3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	// Default Layer
+    [_BASE] = LAYOUT_ortho_5x4(
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_P0,   KC_P0,   KC_PDOT, KC_PENT
+    ),
+	// Fn Layer 1
+    [_FN] = LAYOUT_ortho_5x4(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+	// Fn Layer 2
+    [_FN2] = LAYOUT_ortho_5x4(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+	// Fn Layer 3
+    [_FN3] = LAYOUT_ortho_5x4(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/ai03/soyuz/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/basekeys/slice/config.h

@@ -1,6 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2020 2Moons
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,7 +14,6 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-
 #pragma once
 
 #include "config_common.h"

keyboards/basekeys/slice/keymaps/default/config.h

@@ -1,19 +1,19 @@
-/* Copyright 2020 2Moons
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2020 2Moons
 
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #pragma once
 
 /* Select hand configuration */

keyboards/basekeys/slice/keymaps/default/keymap.c

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
 #include "split_util.h"
 // Each layer gets a name for readability, which is then used in the keymap matrix below.

keyboards/basekeys/slice/keymaps/default_split_left_space/config.h

@@ -1,19 +1,19 @@
-/* Copyright 2020 2Moons
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2020 2Moons
 
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #pragma once
 
 /* Select hand configuration */

keyboards/basekeys/slice/keymaps/default_split_left_space/keymap.c

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
 #include "split_util.h"
 // Each layer gets a name for readability, which is then used in the keymap matrix below.

keyboards/basekeys/slice/rev1/config.h

@@ -1,6 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2020 2Moons
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

keyboards/basekeys/slice/rev1/keymaps/2moons/config.h

@@ -1,19 +1,19 @@
-/* Copyright 2020 2Moons
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2020 2Moons
 
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #pragma once
 
 /* Select hand configuration */

keyboards/basekeys/slice/rev1/keymaps/2moons/keymap.c

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
 #include "keymap_jp.h"
 

keyboards/basekeys/slice/rev1/keymaps/default_all/config.h

@@ -1,19 +1,19 @@
-/* Copyright 2020 2Moons
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2020 2Moons
 
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #pragma once
 
 /* Select hand configuration */

keyboards/basekeys/slice/rev1/keymaps/default_all/keymap.c

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
 
 extern uint8_t is_master;

keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/config.h

@@ -1,19 +1,19 @@
-/* Copyright 2020 2Moons
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2020 2Moons
 
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #pragma once
 
 /* Select hand configuration */

keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/keymap.c

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
 
 extern uint8_t is_master;

keyboards/basekeys/slice/rev1/keymaps/via/config.h

@@ -0,0 +1,22 @@
+/*
+Copyright 2020 2Moons
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+/* Select hand configuration */
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 180

keyboards/basekeys/slice/rev1/keymaps/via/keymap.c

@@ -0,0 +1,85 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_number {
+  _QWERTY = 0,
+  _FN,
+  _LOWER,
+  _RAISE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |--------------------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_BSPACE, KC_BSPACE, KC_BSPACE,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_MODE_FORWARD,   KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC,   KC_RBRC,   KC_BSLS,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_MODE_GRADIENT, KC_CAPS,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,               KC_ENT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_MODE_XMAS,     KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,   KC_RSFT,  KC_RSFT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_TOG,           KC_LCTL, KC_LALT, KC_LALT,  KC_SPC,  KC_SPC,  KC_SPC,      KC_SPC,  KC_SPC,                            KC_RALT,              KC_RCTL,  MO(_FN)
+  //`------------------------------------------------------------------------|   |--------------------------------------------------------------------------------------'
+  ),
+
+  [_FN] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |--------------------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,       KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,    KC_INS, KC_BSPACE,    KC_DEL,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      _______,           _______, _______, _______, _______, _______, _______,     _______, KC_PSCR, KC_SLCK, KC_PAUSE,  KC_UP, _______,   _______,   _______,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      _______,           _______, _______, _______, _______, _______, _______,     _______, KC_HOME, KC_PGUP, KC_LEFT,KC_RIGHT, _______,              _______,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      _______,           _______, _______, _______, _______, _______, _______,     _______,  KC_END, KC_PGDN, KC_DOWN, _______, _______,   _______,   _______,   _______,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      _______,           _______, _______, _______, _______, _______, _______,     _______, _______,                            _______,              _______,   _______
+  //`------------------------------------------------------------------------|   |--------------------------------------------------------------------------------------'
+  ),
+
+  [_LOWER] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |--------------------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_BSPACE, KC_BSPACE, KC_BSPACE,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_MODE_FORWARD,   KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC,   KC_RBRC,   KC_BSLS,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_MODE_GRADIENT, KC_CAPS,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,               KC_ENT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_MODE_XMAS,     KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,   KC_RSFT,  KC_RSFT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_TOG,           KC_LCTL, KC_LALT, KC_LALT,  KC_SPC,  KC_SPC,  KC_SPC,      KC_SPC,  KC_SPC,                            KC_RALT,              KC_RCTL,  MO(_FN)
+  //`------------------------------------------------------------------------|   |--------------------------------------------------------------------------------------'
+  ),
+
+  [_RAISE] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |--------------------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_BSPACE, KC_BSPACE, KC_BSPACE,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_MODE_FORWARD,   KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC,   KC_RBRC,   KC_BSLS,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_MODE_GRADIENT, KC_CAPS,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,               KC_ENT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_MODE_XMAS,     KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,   KC_RSFT,  KC_RSFT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------+----------|
+      RGB_TOG,           KC_LCTL, KC_LALT, KC_LALT,  KC_SPC,  KC_SPC,  KC_SPC,      KC_SPC,  KC_SPC,                            KC_RALT,              KC_RCTL,  MO(_FN)
+  //`------------------------------------------------------------------------|   |--------------------------------------------------------------------------------------'
+  )
+};

keyboards/basekeys/slice/rev1/keymaps/via/rules.mk

@@ -0,0 +1,3 @@
+TAP_DANCE_ENABLE = no
+VIA_ENABLE = yes
+BACKLIGHT_ENABLE = no

keyboards/basekeys/slice/rev1/rev1.c

@@ -1 +1,16 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include "rev1.h"

keyboards/basekeys/slice/rev1/rev1.h

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #pragma once
 
 #include "slice.h"

keyboards/basekeys/slice/rev1_rgb/config.h

@@ -1,6 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2020 2Moons
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,7 +14,6 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-
 #pragma once
 
 /* USB Device descriptor parameter */

keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/config.h

@@ -1,19 +1,19 @@
-/* Copyright 2020 2Moons
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2020 2Moons
 
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #pragma once
 
 /* Select hand configuration */

keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/keymap.c

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
 #include "keymap_jp.h"
 #include "split_util.h"

keyboards/basekeys/slice/rev1_rgb/rev1_rgb.c

@@ -1 +1,16 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include "rev1_rgb.h"

keyboards/basekeys/slice/rev1_rgb/rev1_rgb.h

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #pragma once
 
 #include "slice.h"

keyboards/basekeys/slice/slice.c

@@ -1 +1,16 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include "slice.h"

keyboards/basekeys/slice/slice.h

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #pragma once
 
 #include "quantum.h"

keyboards/basekeys/slice/slice_font.c

@@ -1,3 +1,18 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 

keyboards/basekeys/trifecta/config.h

@@ -0,0 +1,123 @@
+/* Copyright 2020 Swiftrax and Basekeys.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x04D8
+#define PRODUCT_ID      0xEAF3
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Swiftrax
+#define PRODUCT         Trifecta
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+/* key matrix pins */
+
+#define MATRIX_ROW_PINS { B0, B7, F7, B1, B6, C6, C7, B5, F6, D2 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, D1, B2, D0, B3 }
+
+
+#define ENCODERS_PAD_A { D4, D6, D7 }
+#define ENCODERS_PAD_B { B4, D3, D5 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+
+#define RGB_DI_PIN E6
+#define DRIVER_LED_TOTAL 80
+
+/* RGB LED */
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN E6
+#define RGBLED_NUM 80    // Number of LEDs. backlight x69
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+#define RGBLIGHT_ANIMATIONS
+#endif
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Limits the brightness of the LEDS range of 255-0 (255 is default)*/
+#define RGBLIGHT_LIMIT_VAL 128
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* EEPROM for via */
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3
+
+/* bootmagic row col assignment */
+#define BOOTMAGIC_LITE_ROW 1
+#define BOOTMAGIC_LITE_COLUMN 0
+
+#ifdef RGB_MATRIX_ENABLE
+#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+//#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+#   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#    define RGB_MATRIX_HUE_STEP 8
+#    define RGB_MATRIX_SAT_STEP 8
+#    define RGB_MATRIX_VAL_STEP 8
+#    define RGB_MATRIX_SPD_STEP 10
+
+/* Disable the animations you don't want/need.  You will need to disable a good number of these    *
+ * because they take up a lot of space.  Disable until you can successfully compile your firmware. */
+// #   define DISABLE_RGB_MATRIX_ALPHAS_MODS
+// #   define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+// #   define DISABLE_RGB_MATRIX_BREATHING
+// #   define DISABLE_RGB_MATRIX_CYCLE_ALL
+// #   define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+// #   define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+// #   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
+// #   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+// #   define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+// #   define DISABLE_RGB_MATRIX_DUAL_BEACON
+// #   define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+// #   define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+// #   define DISABLE_RGB_MATRIX_RAINDROPS
+// #   define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+// #   define DISABLE_RGB_MATRIX_TYPING_HEATMAP
+// #   define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+// #   define DISABLE_RGB_MATRIX_SPLASH
+// #   define DISABLE_RGB_MATRIX_MULTISPLASH
+// #   define DISABLE_RGB_MATRIX_SOLID_SPLASH
+// #   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif

keyboards/basekeys/trifecta/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Trifecta", 
+    "url": "https://www.basekeys.com", 
+    "maintainer": "Swiftrax", 
+     "width": 18, 
+    "height": 5.25, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":8.75, "y":0}, {"label":"*", "x":9.75, "y":0}, {"label":"(", "x":10.75, "y":0}, {"label":")", "x":11.75, "y":0}, {"label":"_", "x":12.75, "y":0}, {"label":"+", "x":13.75, "y":0}, {"label":"BS", "x":14.75, "y":0}, {"x":15.75, "y":0}, {"x":17, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":8.25, "y":1}, {"label":"U", "x":9.25, "y":1}, {"label":"I", "x":10.25, "y":1}, {"label":"O", "x":11.25, "y":1}, {"label":"P", "x":12.25, "y":1}, {"label":"{", "x":13.25, "y":1}, {"label":"}", "x":14.25, "y":1}, {"label":"|", "x":15.25, "y":1, "w":1.5}, {"x":17, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":8.5, "y":2}, {"label":"J", "x":9.5, "y":2}, {"label":"K", "x":10.5, "y":2}, {"label":"L", "x":11.5, "y":2}, {"label":":", "x":12.5, "y":2}, {"label":"\"", "x":13.5, "y":2}, {"label":"Enter", "x":14.5, "y":2, "w":2.25}, {"x":17, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"x":8, "y":3}, {"label":"N", "x":9, "y":3}, {"label":"M", "x":10, "y":3}, {"label":"<", "x":11, "y":3}, {"label":">", "x":12, "y":3}, {"label":"?", "x":13, "y":3}, {"label":"Shift", "x":14, "y":3, "w":1.75}, {"x":16, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":3, "y":4, "w":1.5}, {"x":4.5, "y":4, "w":2.25}, {"x":6.75, "y":4}, {"x":8.5, "y":4, "w":2.75}, {"label":"Alt", "x":11.25, "y":4, "w":1.5}, {"label":"Win", "x":13.5, "y":4, "w":1.25}, {"x":15, "y":4.25}, {"x":16, "y":4.25}, {"x":17, "y":4.25}]
+        }
+    }
+}

keyboards/basekeys/trifecta/keymaps/default/keymap.c

@@ -0,0 +1,71 @@
+/* Copyright 2020 Swiftrax and Basekeys.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN,
+    _MEDIA };
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_DEL,   KC_DEL,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,             KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_END,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                 KC_HOME,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        MO(_MEDIA),   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,        KC_UP,
+    KC_LCTL, KC_LGUI,  KC_LALT,         KC_SPC,                         KC_SPC,           KC_RGUI, KC_RCTL,  MO(_FN),        KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [_FN] = LAYOUT(
+     KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, _______,  _______,     _______,
+    _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,               _______,
+    _______, RGB_MOD, RGB_HUI, RGB_SAI,  RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______,                         _______,
+    _______, RGB_TOG, RGB_HUD, RGB_SAD,  RGB_VAD, _______, _______, _______, _______, _______, _______, _______,  _______,                   KC_PGUP,
+    _______, _______, _______,           _______, _______,          _______,          _______,          _______,                    KC_HOME, KC_PGDN, KC_END
+  ),
+
+  [_MEDIA] = LAYOUT(
+     KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, _______,  _______,     _______,
+    _______, _______, _______, _______,    RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______,               _______,
+    _______, RGB_MOD, RGB_HUI, RGB_SAI,  RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______,                         _______,
+    _______, RGB_TOG, RGB_HUD, RGB_SAD,  RGB_VAD, _______, _______, _______, _______, _______, _______, _______,  _______,                   KC_PGUP,
+    _______, _______, _______,           _______, _______,          _______,          _______,          _______,                    KC_HOME, KC_PGDN, KC_END
+  )
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    } else if (index == 1) { /* Second encoder */
+        if (clockwise) {
+            tap_code(KC_MNXT);
+        } else {
+            tap_code(KC_MPRV);
+        }
+     } else if (index == 2) { /* Third encoder */
+        if (clockwise) {
+            tap_code(KC_RGHT);
+        } else {
+            tap_code(KC_LEFT);
+        }
+    }
+}

keyboards/basekeys/trifecta/keymaps/default/rules.mk

@@ -0,0 +1,2 @@
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no

keyboards/basekeys/trifecta/keymaps/via/keymap.c

@@ -0,0 +1,71 @@
+/* Copyright 2020 Swiftrax and Basekeys.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN,
+    _MEDIA };
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_ESC,  RGB_TOG,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_DEL,   KC_DEL,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,             KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_END,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                 KC_HOME,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        MO(_MEDIA),   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,        KC_UP,
+    KC_LCTL, KC_LGUI,  KC_LALT,         KC_SPC,                         KC_SPC,           KC_RGUI, KC_RCTL,  MO(_FN),        KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [_FN] = LAYOUT(
+     KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, _______,  _______,     _______, 
+    _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,               _______,
+    _______, RGB_MOD, RGB_HUI, RGB_SAI,  RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______,                         _______,
+    _______, RGB_TOG, RGB_HUD, RGB_SAD,  RGB_VAD, _______, _______, _______, _______, _______, _______, _______,  _______,                   KC_PGUP,
+    _______, _______, _______,           _______, _______,          _______,          _______,          _______,                    KC_HOME, KC_PGDN, KC_END
+  ),
+
+  [_MEDIA] = LAYOUT(
+     KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, _______,  _______,     _______,
+    _______, _______, _______, _______,    RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______,               _______,
+    _______, RGB_MOD, RGB_HUI, RGB_SAI,  RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______,                         _______,
+    _______, RGB_TOG, RGB_HUD, RGB_SAD,  RGB_VAD, _______, _______, _______, _______, _______, _______, _______,  _______,                   KC_PGUP,
+    _______, _______, _______,           _______, _______,          _______,          _______,          _______,                    KC_HOME, KC_PGDN, KC_END
+  )
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    } else if (index == 1) { /* Second encoder */
+        if (clockwise) {
+            tap_code(KC_RGHT);
+        } else {
+            tap_code(KC_LEFT);
+        }
+     } else if (index == 2) { /* Third encoder */
+        if (clockwise) {
+            rgblight_step();
+        } else {
+           rgblight_step_reverse();
+        }
+    }
+}

keyboards/basekeys/trifecta/keymaps/via/rules.mk

@@ -0,0 +1,3 @@
+VIA_ENABLE = yes
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no

keyboards/basekeys/trifecta/readme.md

@@ -0,0 +1,17 @@
+# Trifecta
+
+![Trifecta](https://i.imgur.com/tlIwQowl.jpeg)
+
+An Alice style board with arrowkeys, based on the Fate Arisu layout.
+
+* Keyboard Maintainer: [swiftrax](https://github.com/swiftrax)  
+* Hardware Supported: Trifecta PCB, ATMEGA32U4-AU
+* Hardware Availability: [Website](https://mykeyboard.eu/catalogue/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make basekeys/trifecta:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs)
+
+[Build guide](https://www.basekeys.com/category/build-guides/)

keyboards/basekeys/trifecta/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+ENCODER_ENABLE = yes

keyboards/basekeys/trifecta/trifecta.c

@@ -0,0 +1,61 @@
+/* Copyright 2020 Swiftrax and Basekeys.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "trifecta.h"
+
+#ifdef RGB_MATRIX_ENABLE
+
+led_config_t g_led_config = { {
+    { NO_LED, 70,     61,     52,     43, 34,     24,     14  },
+    {     79, 69,     60,     51,     42, 33,     23, NO_LED  },
+    { NO_LED, 71,     62,     53,     44, 35,     25,     15  },
+    {     78, 68,     59,     50,     41, 32,     22, NO_LED  },
+    {     77, 67,     58,     49,     40, 31, NO_LED,     16  },
+    { NO_LED, 72,     63,     54,     45, 36,     26, NO_LED  },
+    { NO_LED, 73,     64,     55,     46, 37,     27,     17  },
+    {     76, 66,     57,     48,     39, 30,     21, NO_LED  },
+    { NO_LED, 74,     56, NO_LED, NO_LED, 38,     28,     18  },
+    {     75, 65, NO_LED, NO_LED,     47, 29,     20,     19  }
+}, {
+	// Underglow
+    {  218,   7 },  { 214,  45 }, { 180,  47 }, {  147, 50 }, {  94,  62 }, {  37,  51 }, {   4,   8 }, {   36,  15 },
+    {  62,   18 },  {  78,   5 }, { 119,   7 }, {  145, 16 }, { 166,   3 }, { 200,  16 }, 
+    
+    //Per Key
+    { 185,  11 },  { 191,  22 }, { 188,  33 }, { 200,  46 }, { 200,  57 }, { 212,  57 }, { 188,  57 }, { 181,  44 },
+    { 176,  22 },  { 168,  11 }, { 155,  11 }, { 164,  22 }, { 169,  32 }, { 165,  44 }, { 172,  55 }, { 157,  54 }, 
+    { 153,  44 },  { 156,  33 }, { 153,  22 }, { 142,  12 }, { 130,  13 }, { 138,  23 }, { 143,  33 }, { 140,  45 }, 
+    { 137,  56 },  { 128,  47 }, { 132,  35 }, { 127,  25 }, { 119,  16 }, { 107,  17 }, { 115,  27 }, { 120,  37 }, 
+    { 116,  48 },  { 117,  59 }, { 104,  51 }, { 109,  39 }, { 104,  29 }, {  86,  19 }, {  74,  16 }, {  78,  28 }, 
+    {  79,  39 },  {  82,  50 }, {  73,  60 }, {  71,  48 }, {  67,  37 }, {  66,  26 }, {  63,  15 }, {  50,  12 }, 
+    {  55,  24 },  {  55,  35 }, {  59,  47 }, {  50,  56 }, {  47,  45 }, {  43,  33 }, {  43,  22 }, {  39,  10 }, 
+    {  25,  11 },  {  29,  22 }, {  30,  33 }, {  34,  44 }, {  24,  54 }, {   9,  55 }, {  15,  44 }, {  14,  33 }, 
+    {  14,  22 },  {  14,  11 }
+}, {
+    2, 2, 2, 2, 2, 2, 2, 2, 
+    2, 2, 2, 2, 2, 2, 
+
+    4, 4, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 4, 4, 4, 4, 
+    4, 4, 4, 4, 4, 4, 4, 4, 
+    4, 4, 4, 4, 4, 4, 4, 4, 
+    4, 4, 4, 4, 4, 4, 4, 4, 
+    4, 4, 4, 4, 4, 4, 4, 4, 
+    4, 4, 4, 4, 4, 4, 4, 4, 
+    4, 4, 4, 4, 4, 4, 4, 4, 
+    4, 4
+} };
+#endif

keyboards/basekeys/trifecta/trifecta.h

@@ -0,0 +1,48 @@
+/* Copyright 2020 Swiftrax and Basekeys.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO//readabilty 
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k10,  k01,  k11,  k02,  k12,  k03,  k13,      k04,  k14,  k05,  k15,  k06,  k16,  k07,  k17,          k37,  \
+    k30,  k21,  k31,  k22,  k32,  k23,            k33,  k24,  k34,  k25,  k35,  k26,  k36,  k27,          k57,  \
+    k40,  k51,  k41,  k52,  k42,  k53,            k43,  k54,  k44,  k55,  k45,  k56,  k47,                k77,  \
+    k70,  k61,  k71,  k62,  k72,  k63,            k73,  k64,  k74,  k65,  k75,  k66,  k76,          k67,        \
+    k90,  k81,        k91,        k82,                  k94,        k85,  k95,  k86,          k96,  k87,  k97   \
+) \
+{ \
+   { XXX,  k01,  k02,  k03,  k04,  k05,  k06,  k07}, \
+   { k10,  k11,  k12,  k13,  k14,  k15,  k16,  k17}, \
+   { XXX,  k21,  k22,  k23,  k24,  k25,  k26,  k27}, \
+   { k30,  k31,  k32,  k33,  k34,  k35,  k36,  k37}, \
+   { k40,  k41,  k42,  k43,  k44,  k45,  XXX,  k47}, \
+   { XXX,  k51,  k52,  k53,  k54,  k55,  k56,  k57}, \
+   { XXX,  k61,  k62,  k63,  k64,  k65,  k66,  k67}, \
+   { k70,  k71,  k72,  k73,  k74,  k75,  k76,  k77}, \
+   { XXX,  k81,  k82,  XXX,  XXX,  k85,  k86,  k87}, \
+   { k90,  k91,  XXX,  XXX,  k94,  k95,  k96,  k97}  \
+}

keyboards/bear_65/bear_65.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 MudkipMao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bear_65.h"

keyboards/bear_65/bear_65.h

@@ -0,0 +1,46 @@
+/* Copyright 2020 MudkipMao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+      K31, K00, K01, K02, K03, K04, K05, K06,      K07, K08, K09, K0A, K0B, K0C, K0D, K0E,   K4E, \
+     K1E,  K10, K11, K12, K13, K14, K15,           K16, K17, K18, K19, K1A, K1B, K1C, K1D,        \
+    K2E,   K20, K21, K22, K23, K24, K25,           K26, K27, K28, K29,  K2A,  K2B,   K2D,         \
+           K30,   K32, K33, K34, K35, K36,         K37, K38, K39, K3A, K3B, K3C,   K3D, K3E,      \
+           K40,     K43,    K45,      K46,               K48,     K4A,             K4B, K4C, K4D  \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   K2E   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
+    { K40,   KC_NO, KC_NO, K43,   KC_NO, K45,   K46,   KC_NO, K48,   KC_NO, K4A,   K4B,   K4C,   K4D,   K4E   }, \
+}
+
+#define LAYOUT_full_bs( \
+      K31, K00, K01, K02, K03, K04, K05, K06,      K07, K08, K09, K0A, K0B, K0C,   K0D,      K4E, \
+     K1E,  K10, K11, K12, K13, K14, K15,           K16, K17, K18, K19, K1A, K1B, K1C, K1D,        \
+    K2E,   K20, K21, K22, K23, K24, K25,           K26, K27, K28, K29,  K2A,  K2B,   K2D,         \
+           K30,   K32, K33, K34, K35, K36,         K37, K38, K39, K3A, K3B, K3C,   K3D, K3E,      \
+           K40,     K43,    K45,      K46,               K48,     K4A,             K4B, K4C, K4D  \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   KC_NO }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   K2E   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
+    { K40,   KC_NO, KC_NO, K43,   KC_NO, K45,   K46,   KC_NO, K48,   KC_NO, K4A,   K4B,   K4C,   K4D,   K4E   }, \
+}

keyboards/bear_65/config.h

@@ -0,0 +1,76 @@
+/*
+Copyright 2020 MudkipMao
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA13B // Jacky's vendor ID, arbitrarily selected by MudkipMao
+#define PRODUCT_ID      0x000A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Jacky
+#define PRODUCT         Jacky Bear 65 Ergo
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 }
+
+/* Setting the matrix value of top left key for bootmagic lite */
+#define BOOTMAGIC_LITE_ROW      3
+#define BOOTMAGIC_LITE_COLUMN   1
+
+#define DIODE_DIRECTION ROW2COL
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 4
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 15
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 139 /* The maximum brightness level */
+    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//     #define RGBLIGHT_EFFECT_BREATHING
+//     #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//     #define RGBLIGHT_EFFECT_SNAKE
+//     #define RGBLIGHT_EFFECT_KNIGHT
+//     #define RGBLIGHT_EFFECT_CHRISTMAS
+//     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//     #define RGBLIGHT_EFFECT_RGB_TEST
+//     #define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/bear_65/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "Bear 65",
+    "url": "https://qmk.fm/keyboards",
+    "maintainer": "qmk",
+    "width": 20.75,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+             "layout": [{"label":"Esc", "x":0.5, "y":0}, {"label":"~", "x":1.75, "y":0}, {"label":"!", "x":2.75, "y":0}, {"label":"@", "x":3.75, "y":0}, {"label":"#", "x":4.75, "y":0}, {"label":"$", "x":5.75, "y":0}, {"label":"%", "x":6.75, "y":0}, {"label":"^", "x":7.75, "y":0}, {"label":"&", "x":11.25, "y":0}, {"label":"*", "x":12.25, "y":0}, {"label":"(", "x":13.25, "y":0}, {"label":")", "x":14.25, "y":0}, {"label":"_", "x":15.25, "y":0}, {"label":"+", "x":16.25, "y":0}, {"label":"|", "x":17.25, "y":0}, {"label":"~", "x":18.25, "y":0}, {"label":"Del", "x":19.75, "y":0}, {"label":"PgUp", "x":0.25, "y":1}, {"label":"Tab", "x":1.75, "y":1, "w":1.5}, {"label":"Q", "x":3.25, "y":1}, {"label":"W", "x":4.25, "y":1}, {"label":"E", "x":5.25, "y":1}, {"label":"R", "x":6.25, "y":1}, {"label":"T", "x":7.25, "y":1}, {"label":"Y", "x":10.75, "y":1}, {"label":"U", "x":11.75, "y":1}, {"label":"I", "x":12.75, "y":1}, {"label":"O", "x":13.75, "y":1}, {"label":"P", "x":14.75, "y":1}, {"label":"{", "x":15.75, "y":1}, {"label":"}", "x":16.75, "y":1}, {"label":"Backspace", "x":17.75, "y":1, "w":1.5}, {"label":"PgDn", "x":0, "y":2}, {"label":"Caps Lock", "x":1.75, "y":2, "w":1.75}, {"label":"A", "x":3.5, "y":2}, {"label":"S", "x":4.5, "y":2}, {"label":"D", "x":5.5, "y":2}, {"label":"F", "x":6.5, "y":2}, {"label":"G", "x":7.5, "y":2}, {"label":"H", "x":11, "y":2}, {"label":"J", "x":12, "y":2}, {"label":"K", "x":13, "y":2}, {"label":"L", "x":14, "y":2}, {"label":":", "x":15, "y":2}, {"label":"\"", "x":16, "y":2}, {"label":"Enter", "x":17, "y":2, "w":2.25}, {"label":"Shift", "x":1.75, "y":3, "w":2.25}, {"label":"Z", "x":4, "y":3}, {"label":"X", "x":5, "y":3}, {"label":"C", "x":6, "y":3}, {"label":"V", "x":7, "y":3}, {"label":"B", "x":8, "y":3}, {"label":"B", "x":10.5, "y":3}, {"label":"N", "x":11.5, "y":3}, {"label":"M", "x":12.5, "y":3}, {"label":"<", "x":13.5, "y":3}, {"label":">", "x":14.5, "y":3}, {"label":"?", "x":15.5, "y":3}, {"label":"Shift", "x":16.5, "y":3, "w":1.75}, {"label":"Up", "x":18.25, "y":3}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.25}, {"label":"Win", "x":8.25, "y":4}, {"x":10.5, "y":4, "w":2.75}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Left", "x":17.25, "y":4}, {"label":"Down", "x":18.25, "y":4}, {"label":"Right", "x":19.25, "y":4}]
+        },
+        "LAYOUT_full_bs": {
+            "layout": [{"label":"Esc", "x":0.5, "y":0}, {"label":"~", "x":1.75, "y":0}, {"label":"!", "x":2.75, "y":0}, {"label":"@", "x":3.75, "y":0}, {"label":"#", "x":4.75, "y":0}, {"label":"$", "x":5.75, "y":0}, {"label":"%", "x":6.75, "y":0}, {"label":"^", "x":7.75, "y":0}, {"label":"&", "x":11.25, "y":0}, {"label":"*", "x":12.25, "y":0}, {"label":"(", "x":13.25, "y":0}, {"label":")", "x":14.25, "y":0}, {"label":"_", "x":15.25, "y":0}, {"label":"+", "x":16.25, "y":0}, {"label":"Backspace", "x":17.25, "y":0, "w":2}, {"label":"Del", "x":19.75, "y":0}, {"label":"PgUp", "x":0.25, "y":1}, {"label":"Tab", "x":1.75, "y":1, "w":1.5}, {"label":"Q", "x":3.25, "y":1}, {"label":"W", "x":4.25, "y":1}, {"label":"E", "x":5.25, "y":1}, {"label":"R", "x":6.25, "y":1}, {"label":"T", "x":7.25, "y":1}, {"label":"Y", "x":10.75, "y":1}, {"label":"U", "x":11.75, "y":1}, {"label":"I", "x":12.75, "y":1}, {"label":"O", "x":13.75, "y":1}, {"label":"P", "x":14.75, "y":1}, {"label":"{", "x":15.75, "y":1}, {"label":"}", "x":16.75, "y":1}, {"label":"|", "x":17.75, "y":1, "w":1.5}, {"label":"PgDn", "x":0, "y":2}, {"label":"Caps Lock", "x":1.75, "y":2, "w":1.75}, {"label":"A", "x":3.5, "y":2}, {"label":"S", "x":4.5, "y":2}, {"label":"D", "x":5.5, "y":2}, {"label":"F", "x":6.5, "y":2}, {"label":"G", "x":7.5, "y":2}, {"label":"H", "x":11, "y":2}, {"label":"J", "x":12, "y":2}, {"label":"K", "x":13, "y":2}, {"label":"L", "x":14, "y":2}, {"label":":", "x":15, "y":2}, {"label":"\"", "x":16, "y":2}, {"label":"Enter", "x":17, "y":2, "w":2.25}, {"label":"Shift", "x":1.75, "y":3, "w":2.25}, {"label":"Z", "x":4, "y":3}, {"label":"X", "x":5, "y":3}, {"label":"C", "x":6, "y":3}, {"label":"V", "x":7, "y":3}, {"label":"B", "x":8, "y":3}, {"label":"B", "x":10.5, "y":3}, {"label":"N", "x":11.5, "y":3}, {"label":"M", "x":12.5, "y":3}, {"label":"<", "x":13.5, "y":3}, {"label":">", "x":14.5, "y":3}, {"label":"?", "x":15.5, "y":3}, {"label":"Shift", "x":16.5, "y":3, "w":1.75}, {"label":"Up", "x":18.25, "y":3}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.25}, {"label":"Win", "x":8.25, "y":4}, {"x":10.5, "y":4, "w":2.75}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Left", "x":17.25, "y":4}, {"label":"Down", "x":18.25, "y":4}, {"label":"Right", "x":19.25, "y":4}]
+        }
+    }
+}

keyboards/bear_65/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2020 MudkipMao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_all(
+             KC_ESC,  KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,           KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV,     KC_DEL,
+            KC_PGUP,  KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T,                 KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+           KC_PGDN,   KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G,                KC_H, KC_J, KC_K, KC_L,  KC_SCLN,   KC_QUOT,   KC_ENT,
+                      KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B,                KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+                      KC_LCTL,     KC_LALT, KC_SPC, KC_LGUI,                KC_SPC,     MO(_FN),                        KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_FN] = LAYOUT_all(
+             RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,          KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,     _______,
+            RGB_MOD,  _______, KC_BRID, KC_BRIU, _______, _______, _______,                 _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______,
+           RGB_TOG,   _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______,                _______, _______, _______, _______,  _______,   _______,   _______,
+                      _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,                _______, _______, _______, _______, _______, _______, _______, _______,
+                      _______,     _______, _______, _______,                _______,     _______,                        _______, _______,_______ 
+    )
+};

keyboards/bear_65/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for bear_65

keyboards/bear_65/keymaps/via/keymap.c

@@ -0,0 +1,47 @@
+/* Copyright 2020 MudkipMao
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_full_bs(
+             KC_ESC,  KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,           KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,    KC_BSPC,     KC_DEL,
+            KC_PGUP,  KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T,                 KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+           KC_PGDN,   KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G,                KC_H, KC_J, KC_K, KC_L,  KC_SCLN,   KC_QUOT,   KC_ENT,
+                      KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B,                KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+                      KC_LCTL,     KC_LALT, KC_SPC, KC_LGUI,                KC_SPC,     MO(1),                        KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_full_bs(
+             RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,          KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,     _______,
+            RGB_MOD,  _______, KC_BRID, KC_BRIU, _______, _______, _______,                 _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______,
+           RGB_TOG,   _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______,                _______, _______, _______, _______,  _______,   _______,   _______,
+                      _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,                _______, _______, _______, _______, _______, _______, _______, _______,
+                      _______,     _______, _______, _______,                _______,     _______,                        _______, _______,_______ 
+    ),
+    [2] = LAYOUT_full_bs(
+             _______,   _______, _______,   _______,   _______,   _______,   _______,   _______,          _______,   _______,   _______,   _______,  _______,  _______,  _______,     _______,
+            _______,  _______, _______, _______, _______, _______, _______,                 _______, _______, _______, _______, _______, _______, _______, _______,
+           _______,   _______, _______, _______, _______, _______, _______,                _______, _______, _______, _______,  _______,   _______,   _______,
+                      _______, _______, _______, _______, _______, _______,                _______, _______, _______, _______, _______, _______, _______, _______,
+                      _______,     _______, _______, _______,                _______,     _______,                        _______, _______,_______ 
+    ),
+    [3] = LAYOUT_full_bs(
+             _______,   _______, _______,   _______,   _______,   _______,   _______,   _______,          _______,   _______,   _______,   _______,  _______,  _______,  _______,     _______,
+            _______,  _______, _______, _______, _______, _______, _______,                 _______, _______, _______, _______, _______, _______, _______, _______,
+           _______,   _______, _______, _______, _______, _______, _______,                _______, _______, _______, _______,  _______,   _______,   _______,
+                      _______, _______, _______, _______, _______, _______,                _______, _______, _______, _______, _______, _______, _______, _______,
+                      _______,     _______, _______, _______,                _______,     _______,                        _______, _______,_______ 
+    )
+};

keyboards/bear_65/keymaps/via/readme.md

@@ -0,0 +1 @@
+# The via keymap for bear_65

keyboards/bear_65/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/bear_65/readme.md

@@ -0,0 +1,19 @@
+# Bear 65
+
+![Bear 65](https://i.imgur.com/W1sVP1Tl.jpg)
+
+A gasket-mounted 65% keyboard inspired by the [TGR Alice](https://github.com/qmk/qmk_firmware/tree/master/keyboards/tgr/alice). Designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack.
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: Bear 65
+* Hardware Availability: The GB happened July 15th 2020, units are still in production
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bear_65:default
+
+Flashing example for this keyboard:
+
+    make bear_65:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bear_65/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+LTO_ENABLE = yes            # Use LTO flags to reduce firmware size

keyboards/bm60rgb_iso/bm60rgb_iso.c

@@ -32,7 +32,9 @@ led_config_t g_led_config = { {
     // LShift, <, Z, X, C, V, B, N, M, ,, ., /, Shift, Up,
     {   3,  48 }, {  22,  48 }, {  33,  48 }, {  48,  48 }, {  63,  48 }, {  78,  48 }, {  93,  48 }, { 108,  48 }, { 123,  48 }, { 138,  48 }, { 153,  48 }, { 168,  48 }, { 194,  48 }, { 213,  48 }, 
     // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
-    {   3,  64 }, {  22,  64 }, {  33,  64 }, { 101,  64 }, { 135,  64 }, { 153,  64 }, { 195,  64 }, { 210,  64 }, { 225,  64 }
+    {   3,  64 }, {  22,  64 }, {  33,  64 }, { 101,  64 }, { 135,  64 }, { 153,  64 }, { 195,  64 }, { 210,  64 }, { 225,  64 },
+    // UNDERGLOW
+    {   216, 32 }, {  180,  32 }, {  144, 32 }, { 108,  32 }, { 72,  32 }, { 36,  32 }
 }, {
     // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
     4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 
@@ -43,6 +45,8 @@ led_config_t g_led_config = { {
     // LShift,<, Z, X, C, V, B, N, M, ,, ., Shift, Up, / 
     1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 
     // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
-    1, 1, 1, 4, 1, 1, 1, 1, 1
+    1, 1, 1, 4, 1, 1, 1, 1, 1,
+    // UNDERGLOW
+    2, 2, 2, 2, 2, 2
 } };
 #endif

keyboards/boardsource/4x12/config.h

@@ -3,7 +3,7 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xF7E0
+#define VENDOR_ID       0x4273 // "Bs" - Boardsource
 #define PRODUCT_ID      0x0412
 #define DEVICE_VER      0x0000
 #define MANUFACTURER    Boardsource

keyboards/boardsource/5x12/config.h

@@ -3,8 +3,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xF7E0
-#define PRODUCT_ID      0x0412
+#define VENDOR_ID       0x4273 // "Bs" - Boardsource
+#define PRODUCT_ID      0x0512
 #define DEVICE_VER      0x0000
 #define MANUFACTURER    Boardsource
 #define PRODUCT         5x12

keyboards/boardsource/5x12/keymaps/via/keymap.c

@@ -0,0 +1,46 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _MAIN,
+    _RAISE,
+    _LOWER,
+};
+
+// Readability keycodes
+#define LOWER   MO(_LOWER)
+#define RAISE   MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_MAIN] = LAYOUT_ortho_5x12(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  KC_PIPE, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+  [_RAISE] = LAYOUT_ortho_5x12(
+  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  _______, KC_4,    KC_5,    KC_6,    KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+  KC_ENT,  KC_7,    KC_8,    KC_9,    KC_MINS, KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS,
+  RESET,   _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  ),
+
+  [_LOWER] = LAYOUT_ortho_5x12(
+  KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+  KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  RESET,   _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  ),
+  [3] = LAYOUT_ortho_5x12(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  )
+
+};

keyboards/boardsource/5x12/keymaps/via/readme.md

@@ -0,0 +1,5 @@
+# The via keymap for boardsource 5x12 ortholinear keyboard
+
+This folder contains the [VIA](https://caniusevia.com/) configuration for the boardsource 5x12 ortholinear keyboard
+
+Maintained by: [gwillad](https://github.com/gwillad)

keyboards/boardsource/5x12/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/claw44/ssd1306.c

@@ -10,6 +10,8 @@
 #include "sendchar.h"
 #include "timer.h"
 
+struct CharacterMatrix display;
+
 extern const unsigned char font[] PROGMEM;
 
 // Set this to 1 to help diagnose early startup problems

keyboards/claw44/ssd1306.h

@@ -65,7 +65,7 @@ struct CharacterMatrix {
   bool dirty;
 };
 
-struct CharacterMatrix display;
+extern struct CharacterMatrix display;
 
 bool iota_gfx_init(bool rotate);
 void iota_gfx_task(void);

keyboards/clueboard/66/keymaps/badger/keymap.c

@@ -0,0 +1,53 @@
+/*
+Copyright 2020 Dan White <opensource@bluetufa.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "badger.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY_LINUX]      = LAYOUT_66_ansi(\
+      KC_GRV,    KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC,  KC_HOME, \
+      KC_TAB,    KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS,  KC_END, \
+      MOVE,      KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT, \
+      KC_LSFT,   KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   KC_UP,  \
+      KC_LCTL,   KC_LALT,  KC_LGUI,  KC_SPC,   ADJUST,   KC_RGUI,  KC_LALT,  KC_LEFT,  KC_DOWN,  KC_RGHT),
+
+  [_MOVE_LINUX]        = LAYOUT_66_ansi(\
+     KC_ESC,     VD_1,     VD_2,     VD_3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   IJ_UP,     IJ_DOWN,  KC_DEL,   KC_PGUP, \
+     _______,    IJ_STEP,  IJ_INTO,  IJ_OUT,   IJ_RUN,   IJ_STOP,  IJ_OUT,   KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  IJ_BACK,   IJ_FWD,   KC_INS,   KC_PGDN, \
+     _______,    WM_LH,    WM_UH,    WM_RH,    WD_FRWD,  MAC_POP,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CS_RIGHT, CS_DOWN,   _______, \
+     _______,    MM_UH,    MM_BH,    MAC_CPY,  MAC_PST,  WD_BACK,  KC_MNXT,  IJ_REN,   IJ_IMPL,  IJ_DECL,  IJ_USAG,  _______,   KC_BRIU, \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_BRID,  KC_END),
+
+  [_QWERTY_MAC]  = LAYOUT_66_ansi(\
+      KC_GRV,    KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC,  KC_HOME, \
+      KC_TAB,    KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS,  KC_END, \
+      MOVE_MAC,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT, \
+      KC_LSFT,   KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   KC_UP,  \
+      KC_LCTL,   KC_LALT,  KC_LGUI,  KC_SPC,   ADJUST,   KC_RGUI,  KC_LALT,  KC_LEFT,  KC_DOWN,  KC_RGHT),
+
+  [_MOVE_MAC]    = LAYOUT_66_ansi(\
+     KC_ESC,     M_VD1,    M_VD2,    M_VD3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   IJ_UP,     IJ_DOWN,  KC_DEL,   KC_PGUP, \
+     _______,    IJ_STEP,  IJ_INTO,  IJ_OUT,   IJ_RUN,   IJ_STOP,  IJ_OUT,   KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  IJ_BACK,   IJ_FWD,   KC_INS,   KC_PGDN, \
+     _______,    MM_LH,    MM_MAX,   MM_RH,    WD_FRWD,  MAC_POP,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CM_RIGHT, CM_DOWN,   _______, \
+     _______,    MM_UH,    MM_BH,    MAC_CPY,  MAC_PST,  WD_BACK,  KC_MNXT,  IJ_REN,   IJ_IMPL,  IJ_DECL,  IJ_USAG,  _______,   KC_BRIU, \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_BRID,  KC_END),
+
+  [_ADJUST]      = LAYOUT_66_ansi(\
+      KC_ESC,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,   KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   KC_DEL,   KC_VOLU, \
+      _______,   NK_ON,    NK_OFF,   EEP_RST,  RESET,     KC_MSTP, KC_MPLY,  KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  AG_SWAP,   AG_NORM,  KC_INS,   KC_VOLD, \
+      _______,   GE_SWAP,  GE_NORM,  DEBUG,    AG_SWAP,   AG_NORM, KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  _______,  _______,   _______, \
+      _______,   DF_1,     DF_2,     KC_CAPS,  _______,   KC_MPRV, KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  _______,  _______,   KC_BRIU, \
+      _______,   _______,  _______,  _______,  _______,   _______, _______,  KC_HOME,  KC_BRID,  KC_END)
+};
+

keyboards/comet46/ssd1306.c

@@ -10,6 +10,8 @@
 #include "sendchar.h"
 #include "timer.h"
 
+struct CharacterMatrix display;
+
 extern const unsigned char font[] PROGMEM;
 
 // Set this to 1 to help diagnose early startup problems

keyboards/comet46/ssd1306.h

@@ -65,7 +65,7 @@ struct CharacterMatrix {
   bool dirty;
 };
 
-struct CharacterMatrix display;
+extern struct CharacterMatrix display;
 
 bool iota_gfx_init(bool rotate);
 void iota_gfx_task(void);

keyboards/coseyfannitutti/discipad/keymaps/via/rules.mk

@@ -1,4 +1,3 @@
 VIA_ENABLE = yes
 LTO_ENABLE = yes
-EXTRAKEY_ENABLE = no
 MOUSEKEY_ENABLE = no

keyboards/coseyfannitutti/discipline/keymaps/via/rules.mk

@@ -1,4 +1,3 @@
 VIA_ENABLE = yes
 LTO_ENABLE = yes
-EXTRAKEY_ENABLE = no
-MOUSEKEY_ENABLE = no
+MOUSEKEY_ENABLE = no

keyboards/coseyfannitutti/mysterium/info.json

@@ -8,8 +8,14 @@
         "LAYOUT_tkl_ansi": {
             "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Menu", "x":11.25, "y":5.25, "w":1.25}, {"label":"Fn", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}]
         },
-        "LAYOUT_tkl_ansi_tsangan": {
+        "LAYOUT_tkl_ansi_7u": {
             "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25, "w":1.5}, {"label":"Fn", "x":12.5, "y":5.25}, {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}]
+        },
+        "LAYOUT_tkl_iso": {
+            "layout": [{"x":0, "y":0.25}, {"x":2, "y":0.25}, {"x":3, "y":0.25}, {"x":4, "y":0.25}, {"x":5, "y":0.25}, {"x":6.5, "y":0.25}, {"x":7.5, "y":0.25}, {"x":8.5, "y":0.25}, {"x":9.5, "y":0.25}, {"x":11, "y":0.25}, {"x":12, "y":0.25}, {"x":13, "y":0.25}, {"x":14, "y":0.25}, {"x":15.25, "y":0.25}, {"x":16.25, "y":0.25}, {"x":17.25, "y":0.25}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5, "w":1.25}, {"x":11.25, "y":5.5, "w":1.25}, {"x":12.5, "y":5.5, "w":1.25}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}]
+        },
+        "LAYOUT_tkl_iso_7u": {
+            "layout": [{"x":0, "y":0.25}, {"x":2, "y":0.25}, {"x":3, "y":0.25}, {"x":4, "y":0.25}, {"x":5, "y":0.25}, {"x":6.5, "y":0.25}, {"x":7.5, "y":0.25}, {"x":8.5, "y":0.25}, {"x":9.5, "y":0.25}, {"x":11, "y":0.25}, {"x":12, "y":0.25}, {"x":13, "y":0.25}, {"x":14, "y":0.25}, {"x":15.25, "y":0.25}, {"x":16.25, "y":0.25}, {"x":17.25, "y":0.25}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}]
         }
     }
 }

keyboards/coseyfannitutti/mysterium/keymaps/ansi_7u/keymap.c

@@ -16,7 +16,7 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_tkl_ansi_tsangan(
+  [0] = LAYOUT_tkl_ansi_7u(
       KC_GESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
       KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_INS,   KC_HOME, KC_PGUP,
       KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,   KC_END,  KC_PGDN,
@@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,                     KC_UP,
       KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RALT, MO(1),  KC_RCTL,             KC_LEFT,  KC_DOWN, KC_RIGHT),
 
-  [1] = LAYOUT_tkl_ansi_tsangan(
+  [1] = LAYOUT_tkl_ansi_7u(
       KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,

keyboards/coseyfannitutti/mysterium/keymaps/iso/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_tkl_iso(
+      KC_GESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_INS,   KC_HOME, KC_PGUP,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_DEL,   KC_END,  KC_PGDN,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NUHS, KC_ENT,
+      KC_LSFT, KC_NUBS,  KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,                     KC_UP,
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, KC_RGUI, MO(1),  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RIGHT),
+
+  [1] = LAYOUT_tkl_iso(
+      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,           KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_VOLU,
+      KC_TRNS, KC_TRNS, KC_TRNS,                          KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,            KC_TRNS, KC_VOLD, KC_TRNS)
+};

keyboards/coseyfannitutti/mysterium/keymaps/via/keymap.c

@@ -16,35 +16,35 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_tkl_ansi(
+  [0] = LAYOUT_tkl_iso(
       KC_GESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
       KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_INS,   KC_HOME, KC_PGUP,
-      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,   KC_END,  KC_PGDN,
-      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,
-      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,                     KC_UP,
-      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, KC_RGUI, MO(1),  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RIGHT),
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_DEL,   KC_END,  KC_PGDN,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT, KC_BSLS,
+      KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,                     KC_UP,
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, KC_RGUI, MO(1),    KC_RCTL,            KC_LEFT, KC_DOWN, KC_RIGHT),
 
-  [1] = LAYOUT_tkl_ansi(
+  [1] = LAYOUT_tkl_iso(
       KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,
-      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_VOLU,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,           KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_VOLU,
       KC_TRNS, KC_TRNS, KC_TRNS,                          KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,            KC_TRNS, KC_VOLD, KC_TRNS),
 
-  [2] = LAYOUT_tkl_ansi(
+  [2] = LAYOUT_tkl_iso(
       KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,
-      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,           KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS,                          KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS),
 
-  [3] = LAYOUT_tkl_ansi(
+  [3] = LAYOUT_tkl_iso(
       KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
-      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,
-      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,           KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_TRNS,
       KC_TRNS, KC_TRNS, KC_TRNS,                          KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS)
 };

keyboards/coseyfannitutti/mysterium/keymaps/via/rules.mk

@@ -1,4 +1,2 @@
 VIA_ENABLE = yes
 LTO_ENABLE = yes
-EXTRAKEY_ENABLE = no
-MOUSEKEY_ENABLE = no

keyboards/coseyfannitutti/mysterium/mysterium.h

@@ -37,7 +37,7 @@
     { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, K59, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H }  \
 }
 
-#define LAYOUT_tkl_ansi_tsangan( \
+#define LAYOUT_tkl_ansi_7u( \
     K00,      K02, K03, K04, K05, K06, K07, K08, K09,      K0B, K0C, K0D, K0E, K0F, K0G, K0H, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, K1G, K1H, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2F, K2G, K2H, \
@@ -53,3 +53,37 @@
     { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, _x_, _x_, K4D, _x_, _x_, K4G, _x_ }, \
     { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, _x_, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H }  \
 }
+
+#define LAYOUT_tkl_iso( \
+    K00,      K02, K03, K04, K05, K06, K07, K08, K09,      K0B, K0C, K0D, K0E, K0F, K0G, K0H, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, K1G, K1H, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           K2F, K2G, K2H, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K2D,                     \
+    K40, K01, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A,      K4D,           K4G,      \
+    K50, K51, K52,                K56,           K59, K5A,      K5C,      K5E, K5F, K5G, K5H  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, _x_, K0B, K0C, K0D, K0E, K0F, K0G, K0H }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, _x_, K1F, K1G, K1H }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, _x_, K2F, K2G, K2H }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, _x_, _x_, _x_, _x_ }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, _x_, _x_, K4D, _x_, _x_, K4G, _x_ }, \
+    { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, K59, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H }  \
+}
+
+#define LAYOUT_tkl_iso_7u( \
+    K00,      K02, K03, K04, K05, K06, K07, K08, K09,      K0B, K0C, K0D, K0E, K0F, K0G, K0H, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, K1G, K1H, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           K2F, K2G, K2H, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K2D,                     \
+    K40, K01, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A,      K4D,           K4G,      \
+    K50, K51, K52,                K56,                K5A,      K5C,      K5E, K5F, K5G, K5H  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, _x_, K0B, K0C, K0D, K0E, K0F, K0G, K0H }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, _x_, K1F, K1G, K1H }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, _x_, K2F, K2G, K2H }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, _x_, _x_, _x_, _x_ }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, _x_, _x_, K4D, _x_, _x_, K4G, _x_ }, \
+    { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, _x_, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H }  \
+}

keyboards/coseyfannitutti/romeo/keymaps/via/rules.mk

@@ -1,4 +1,3 @@
 VIA_ENABLE = yes
 LTO_ENABLE = yes
-EXTRAKEY_ENABLE = no
-MOUSEKEY_ENABLE = no
+MOUSEKEY_ENABLE = no

keyboards/crkbd/config.h

@@ -1,6 +1,6 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -19,9 +19,55 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #include "config_common.h"
-#include <serial_config.h>
 
-#define USE_I2C
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4653
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    foostan
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+
+// wiring of each half
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
 #define USE_SERIAL
 
 #define NO_ACTION_MACRO

keyboards/crkbd/crkbd.c

@@ -1,9 +1,19 @@
-#include "crkbd.h"
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
 
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-#ifdef SSD1306OLED
-  return process_record_gfx(keycode,record) && process_record_user(keycode, record);
-#else
-  return process_record_user(keycode, record);
-#endif
-}
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "crkbd.h"

keyboards/crkbd/crkbd.h

@@ -1,5 +1,24 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #pragma once
 
 #ifdef KEYBOARD_crkbd_rev1
-  #include "rev1.h"
+#    include "rev1.h"
 #endif
+
+#include "quantum.h"

keyboards/crkbd/keymaps/bcat/keymap.c

@@ -13,9 +13,9 @@ enum layer {
 #define LY_RSE MO(LAYER_RAISE)
 
 #define KY_CSPC LCTL(KC_SPC)
-#define KY_LOCK LGUI(KC_L)
-#define KY_WINL LGUI(KC_LEFT)
-#define KY_WINR LGUI(KC_RGHT)
+#define KY_ZMIN LCTL(KC_EQL)
+#define KY_ZMOUT LCTL(KC_MINS)
+#define KY_ZMRST LCTL(KC_0)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Default layer: http://www.keyboard-layout-editor.com/#/gists/08d9827d916662a9414f48805aa895a5 */
@@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Lower layer: http://www.keyboard-layout-editor.com/#/gists/c3fba5eaa2cd70fdfbdbc0f9e34d3bc0 */
     [LAYER_LOWER] = LAYOUT(
         MC_ALTT,  KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,                      KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  _______,
-        KY_CSPC,  KY_WINL,  KY_WINR,  KY_LOCK,  KC_WBAK,  KC_WFWD,                      KC_PIPE,  KC_UNDS,  KC_PLUS,  KC_LCBR,  KC_RCBR,  KC_TILD,
+        KY_CSPC,  KY_ZMRST, KY_ZMOUT, KY_ZMIN,  KC_WBAK,  KC_WFWD,                      KC_PIPE,  KC_UNDS,  KC_PLUS,  KC_LCBR,  KC_RCBR,  KC_TILD,
         _______,  KC_APP,   KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_LGUI,                      KC_BSLS,  KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  KC_GRV,
                                                 _______,  _______,  _______,  _______,  _______,  _______
     ),

keyboards/crkbd/keymaps/bcat/readme.md

@@ -50,7 +50,7 @@ elimination.
 
 ## Lower layer
 
-![Lower layer layout](https://i.imgur.com/djIkwsa.png)
+![Lower layer layout](https://i.imgur.com/vaIc9JY.png)
 
 ([KLE](http://www.keyboard-layout-editor.com/#/gists/c3fba5eaa2cd70fdfbdbc0f9e34d3bc0))
 
@@ -74,8 +74,8 @@ And yup, the shifted versions are above the unshifted versions.
 * Remaining keys from a TKL are placed out of the way on the bottom row of the
 left half.
 
-* The home row on the left half contains handy shortcuts for window movement,
-and browser navigation, and screen lock.
+* The home row on the left half contains handy shortcuts for zooming and browser
+navigation.
 
 * Lower+Esc is bound to Ctrl+Space because the Ctrl and Space keys are both on
 the left thumb, so this key combination (which I use for tmux prefix and editor
@@ -109,7 +109,8 @@ keys (F1–F5) on the home row.)
 * Insert and Delete are on the rightmost column, because there didn't seem to
 be a better place to put them.
 
-* Caps Lock is bound in the same position as on an HHKB, for lack of an obvious better location.
+* Caps Lock is bound in the same position as on an HHKB, for lack of an obvious
+better location.
 
 ## Adjust layer
 

keyboards/crkbd/keymaps/default/keymap.c

@@ -1,3 +1,21 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #include QMK_KEYBOARD_H
 
 

keyboards/crkbd/keymaps/oled_sample/config.h

@@ -0,0 +1,48 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+#ifdef KEYBOARD_crkbd_rev1_common
+#    undef USE_I2C
+#    define USE_SERIAL
+#endif
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c"

keyboards/crkbd/keymaps/oled_sample/keymap.c

@@ -0,0 +1,208 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum crkbd_layers {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+
+#define RAISE MO(_RAISE)
+#define LOWER MO(_LOWER)
+#define CTLTB CTL_T(KC_TAB)
+#define GUIEI GUI_T(KC_LANG2)
+#define ALTKN ALT_T(KC_LANG1)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,     KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    CTLTB,   KC_A,    KC_S,    KC_D,    KC_F,     KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,     KC_B,                      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                                        GUIEI,    LOWER,   KC_SPC,  KC_ENT,  RAISE,   ALTKN
+  ),
+
+  [_LOWER] = LAYOUT(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,     KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    CTLTB,   KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,                     KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  XXXXXXX,
+    KC_LSFT, KC_F11,  KC_F12,  KC_F13,  KC_F14,   KC_F15,                    KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  XXXXXXX,
+                                        GUIEI,    LOWER,   KC_SPC,  KC_ENT,  RAISE,   ALTKN
+  ),
+
+  [_RAISE] = LAYOUT(
+    KC_ESC,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+    CTLTB,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   KC_MINS, KC_EQL,  KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,
+    KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,
+                                        GUIEI,   LOWER,   KC_SPC,  KC_ENT,  RAISE,   ALTKN
+
+  ),
+
+  [_ADJUST] = LAYOUT(
+    RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                                        GUIEI,   LOWER,   KC_SPC,  KC_ENT,  RAISE,   ALTKN
+  )
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+    return state;
+}
+
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    if (is_keyboard_master()) {
+        return OLED_ROTATION_270;
+    } else {
+        return rotation;
+    }
+}
+
+void render_crkbd_logo(void) {
+    static const char PROGMEM crkbd_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(crkbd_logo, false);
+}
+
+#    define KEYLOG_LEN 5
+char     keylog_str[KEYLOG_LEN] = {};
+uint8_t  keylogs_str_idx        = 0;
+uint16_t log_timer              = 0;
+
+const char code_to_name[60] = {
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
+    'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
+    'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
+    '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
+    'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
+    '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
+
+void add_keylog(uint16_t keycode) {
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+        keycode = keycode & 0xFF;
+    }
+
+    for (uint8_t i = KEYLOG_LEN - 1; i > 0; i--) {
+        keylog_str[i] = keylog_str[i - 1];
+    }
+    if (keycode < 60) {
+        keylog_str[0] = code_to_name[keycode];
+    }
+    keylog_str[KEYLOG_LEN - 1] = 0;
+
+    log_timer = timer_read();
+}
+
+void update_log(void) {
+    if (timer_elapsed(log_timer) > 750) {
+        add_keylog(0);
+    }
+}
+
+void render_keylogger_status(void) {
+    oled_write_P(PSTR("KLogr"), false);
+    oled_write(keylog_str, false);
+}
+
+void render_default_layer_state(void) {
+    oled_write_P(PSTR("Lyout"), false);
+    switch (get_highest_layer(default_layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR(" QRTY"), false);
+            break;
+    }
+}
+
+void render_layer_state(void) {
+    oled_write_P(PSTR("LAYER"), false);
+    oled_write_P(PSTR("Lower"), layer_state_is(_LOWER));
+    oled_write_P(PSTR("Raise"), layer_state_is(_RAISE));
+}
+
+void render_keylock_status(uint8_t led_usb_state) {
+    oled_write_P(PSTR("Lock:"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK));
+    oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK));
+    oled_write_ln_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
+}
+
+void render_mod_status(uint8_t modifiers) {
+    oled_write_P(PSTR("Mods:"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("S"), (modifiers & MOD_MASK_SHIFT));
+    oled_write_P(PSTR("C"), (modifiers & MOD_MASK_CTRL));
+    oled_write_P(PSTR("A"), (modifiers & MOD_MASK_ALT));
+    oled_write_P(PSTR("G"), (modifiers & MOD_MASK_GUI));
+}
+
+void render_bootmagic_status(void) {
+    /* Show Ctrl-Gui Swap options */
+    static const char PROGMEM logo[][2][3] = {
+        {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
+        {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
+    };
+    oled_write_P(PSTR("BTMGK"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(logo[0][0], !keymap_config.swap_lctl_lgui);
+    oled_write_P(logo[1][0], keymap_config.swap_lctl_lgui);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(logo[0][1], !keymap_config.swap_lctl_lgui);
+    oled_write_P(logo[1][1], keymap_config.swap_lctl_lgui);
+    oled_write_P(PSTR(" NKRO"), keymap_config.nkro);
+}
+
+void render_status_main(void) {
+    /* Show Keyboard Layout  */
+    render_default_layer_state();
+    render_keylock_status(host_keyboard_leds());
+    render_mod_status(get_mods());
+    render_bootmagic_status();
+
+    render_keylogger_status();
+}
+
+void oled_task_user(void) {
+    update_log();
+    if (is_master) {
+        render_status_main();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_crkbd_logo();
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        add_keylog(keycode);
+    }
+    return true;
+}
+#endif

keyboards/crkbd/keymaps/oled_sample/rules.mk

@@ -0,0 +1,7 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+OLED_DRIVER_ENABLE = yes