Migrate build target markers to keyboard.json

* Modify PR23309 changelog

Adds a direct link to the pull request.

* Add PR23329 changelog

* Update keyboard aliases file

Updates the legacy keyboard aliases for the JJ40 and JJ50, which have
been moved again for version 0.25.0.

* Minor touch-up for JJ40 rev1 readme

.clangd

@@ -1,4 +1,4 @@
 CompileFlags:
   Add: [-Wno-unknown-attributes, -Wno-maybe-uninitialized, -Wno-unknown-warning-option]
-  Remove: [-W*, -mcall-prologues]
+  Remove: [-W*, -mmcu=*, -mcpu=*, -mfpu=*, -mfloat-abi=*, -mno-unaligned-access, -mno-thumb-interwork, -mcall-prologues]
   Compiler: clang

.github/workflows/ci_build_major_branch.yml

@@ -0,0 +1,123 @@
+name: CI Build Major Branch
+
+permissions:
+  contents: read
+  actions: write
+
+on:
+  push:
+    branches: [master, develop]
+  workflow_dispatch:
+    inputs:
+      branch:
+        type: choice
+        description: "Branch to build"
+        options: [master, develop]
+
+env:
+  # https://docs.github.com/en/actions/learn-github-actions/usage-limits-billing-and-administration#usage-limits
+  # We've decreased it from 20 to 15 to allow for other GHA to run unimpeded
+  CONCURRENT_JOBS: 15
+
+# Ensure we only have one build running at a time, cancelling any active builds if a new commit is pushed to the respective branch
+concurrency:
+  group: ci_build-${{ github.event.inputs.branch || github.ref_name }}
+  cancel-in-progress: true
+
+jobs:
+  determine_concurrency:
+    name: "Determine concurrency"
+    if: github.repository == 'qmk/qmk_firmware'
+    runs-on: ubuntu-latest
+    container: ghcr.io/qmk/qmk_cli
+
+    outputs:
+      slice_length: ${{ steps.generate_slice_length.outputs.slice_length }}
+
+    steps:
+      - name: Install prerequisites
+        run: |
+          apt-get update
+          apt-get install -y jq
+
+      - name: Disable safe.directory check
+        run: |
+          git config --global --add safe.directory '*'
+
+      - name: Checkout QMK Firmware
+        uses: actions/checkout@v4
+
+      - name: Determine concurrency
+        id: generate_slice_length
+        run: |
+          target_count=$( {
+            qmk find -km default 2>/dev/null
+            qmk find -km via 2>/dev/null
+          } | sort | uniq | wc -l)
+          slice_length=$((target_count / ($CONCURRENT_JOBS - 1))) # Err on the side of caution as we're splitting default and via
+          echo "slice_length=$slice_length" >> $GITHUB_OUTPUT
+
+  build_targets:
+    name: "Compile keymap ${{ matrix.keymap }}"
+    needs: determine_concurrency
+    strategy:
+      fail-fast: false
+      matrix:
+        keymap: [default, via]
+    uses: ./.github/workflows/ci_build_major_branch_keymap.yml
+    with:
+      branch: ${{ inputs.branch || github.ref_name }}
+      keymap: ${{ matrix.keymap }}
+      slice_length: ${{ needs.determine_concurrency.outputs.slice_length }}
+    secrets: inherit
+
+  rollup_tasks:
+    name: "Consolidation"
+    needs: build_targets
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Download firmwares
+        uses: actions/download-artifact@v4
+        with:
+          pattern: firmware-*
+          path: firmwares
+          merge-multiple: true
+
+      - name: Upload to https://ci.qmk.fm/${{ inputs.branch || github.ref_name }}/${{ github.sha }}
+        uses: jakejarvis/s3-sync-action@master
+        with:
+          args: --acl public-read --follow-symlinks --delete
+        env:
+          AWS_S3_BUCKET: ${{ vars.CI_QMK_FM_SPACES_BUCKET }}
+          AWS_ACCESS_KEY_ID: ${{ secrets.CI_QMK_FM_SPACES_KEY }}
+          AWS_SECRET_ACCESS_KEY: ${{ secrets.CI_QMK_FM_SPACES_SECRET }}
+          AWS_REGION: ${{ vars.CI_QMK_FM_SPACES_REGION }}
+          AWS_S3_ENDPOINT: ${{ vars.CI_QMK_FM_SPACES_ENDPOINT }}
+          SOURCE_DIR: firmwares
+          DEST_DIR: ${{ inputs.branch || github.ref_name }}/${{ github.sha }}
+
+      - name: Upload to https://ci.qmk.fm/${{ inputs.branch || github.ref_name }}/latest
+        uses: jakejarvis/s3-sync-action@master
+        with:
+          args: --acl public-read --follow-symlinks --delete
+        env:
+          AWS_S3_BUCKET: ${{ vars.CI_QMK_FM_SPACES_BUCKET }}
+          AWS_ACCESS_KEY_ID: ${{ secrets.CI_QMK_FM_SPACES_KEY }}
+          AWS_SECRET_ACCESS_KEY: ${{ secrets.CI_QMK_FM_SPACES_SECRET }}
+          AWS_REGION: ${{ vars.CI_QMK_FM_SPACES_REGION }}
+          AWS_S3_ENDPOINT: ${{ vars.CI_QMK_FM_SPACES_ENDPOINT }}
+          SOURCE_DIR: firmwares
+          DEST_DIR: ${{ inputs.branch || github.ref_name }}/latest
+
+      - name: Check if failure marker file exists
+        id: check_failure_marker
+        uses: andstor/file-existence-action@v3
+        with:
+          files: firmwares/.failed
+
+      - name: Fail build if needed
+        if: steps.check_failure_marker.outputs.files_exists == 'true'
+        run: |
+          # Exit with failure if the compilation stage failed
+          exit 1

.github/workflows/ci_build_major_branch_keymap.yml

@@ -0,0 +1,181 @@
+name: CI Build Major Branch Keymap
+
+permissions:
+  contents: read
+  actions: write
+
+on:
+  workflow_call:
+    inputs:
+      branch:
+        type: string
+        required: true
+      keymap:
+        type: string
+        required: true
+      slice_length:
+        type: string
+        required: true
+
+jobs:
+  generate_targets:
+    name: "Generate targets (${{ inputs.keymap }})"
+    runs-on: ubuntu-latest
+    container: ghcr.io/qmk/qmk_cli
+
+    outputs:
+      targets: ${{ steps.generate_targets.outputs.targets }}
+
+    steps:
+      - name: Install prerequisites
+        run: |
+          apt-get update
+          apt-get install -y jq
+
+      - name: Disable safe.directory check
+        run: |
+          git config --global --add safe.directory '*'
+
+      - name: Checkout QMK Firmware
+        uses: actions/checkout@v4
+
+      - name: Generate build targets
+        id: generate_targets
+        run: |
+          { # Intentionally use `shuf` here so that we share manufacturers across all build groups -- some have a lot of ARM-based boards which inherently take longer
+            counter=0
+            echo -n '{'
+            qmk find -km ${{ inputs.keymap }} 2>/dev/null | sort | uniq | shuf | xargs -L${{ inputs.slice_length }} | while IFS=$'\n' read target ; do
+                if [ $counter -gt 0 ]; then
+                    echo -n ','
+                fi
+                counter=$((counter+1))
+                printf "\"group %02d\":{" $counter
+                echo -n '"targets":"'
+                echo $target | tr ' ' '\n' | sort | uniq | xargs echo -n
+                echo -n '"}'
+            done
+            echo -n '}'
+          } | sed -e 's@\n@@g' > targets.json
+
+          # Output the target keys as a variable
+          echo "targets=$(jq -c 'keys' targets.json)" >> $GITHUB_OUTPUT
+
+      - name: Upload targets json
+        uses: actions/upload-artifact@v4
+        with:
+          name: targets-${{ inputs.keymap }}
+          path: targets.json
+
+  build_targets:
+    name: "Compile ${{ matrix.target }} (${{ inputs.keymap }})"
+    needs: generate_targets
+    runs-on: ubuntu-latest
+    container: ghcr.io/qmk/qmk_cli
+    continue-on-error: true
+
+    strategy:
+      matrix:
+        target: ${{ fromJson(needs.generate_targets.outputs.targets) }}
+
+    steps:
+      - name: Install prerequisites
+        run: |
+          apt-get update
+          apt-get install -y jq
+
+      - name: Disable safe.directory check
+        run: |
+          git config --global --add safe.directory '*'
+
+      - name: Checkout QMK Firmware
+        uses: actions/checkout@v4
+
+      - name: Get target definitions
+        uses: actions/download-artifact@v4
+        with:
+          name: targets-${{ inputs.keymap }}
+          path: .
+
+      - name: Deploy submodules
+        run: |
+          qmk git-submodule -f
+
+      - name: Dump targets
+        run: |
+          jq -r '.["${{ matrix.target }}"].targets' targets.json | tr ' ' '\n' | sort
+
+      - name: Build targets
+        continue-on-error: true
+        run: |
+          export NCPUS=$(nproc 2>/dev/null || sysctl -n hw.ncpu 2>/dev/null || getconf _NPROCESSORS_ONLN 2>/dev/null)
+          qmk mass-compile -t -j $NCPUS -e DUMP_CI_METADATA=yes $(jq -r '.["${{ matrix.target }}"].targets' targets.json) || touch .failed
+
+      - name: Upload binaries
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.keymap }}-${{ matrix.target }}
+          if-no-files-found: ignore
+          path: |
+            *.bin
+            *.hex
+            *.uf2
+            .build/failed.*
+            .failed
+
+      - name: Fail build if any group failed
+        run: |
+          # Exit with failure if the compilation stage failed
+          [ ! -f .failed ] || exit 1
+
+  repack_firmware:
+    if: always()
+    name: "Repack artifacts"
+    needs: build_targets
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout QMK Firmware
+        uses: actions/checkout@v4
+
+      - name: Download firmwares
+        uses: actions/download-artifact@v4
+        with:
+          pattern: firmware-${{ inputs.keymap }}-*
+          path: .
+          merge-multiple: true
+
+      - name: Upload all firmwares
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.keymap }}
+          if-no-files-found: ignore
+          path: |
+            *.bin
+            *.hex
+            *.uf2
+            .build/failed.*
+            .failed
+
+      - name: Generate output logs
+        run: |
+          # Generate the step summary markdown
+          ./util/ci/generate_failure_markdown.sh > $GITHUB_STEP_SUMMARY || true
+          # Truncate to a maximum of 1MB to deal with GitHub workflow limit
+          truncate --size='<960K' $GITHUB_STEP_SUMMARY || true
+
+      - name: Delete temporary build artifacts
+        uses: geekyeggo/delete-artifact@v5
+        with:
+          name: |
+            firmware-${{ inputs.keymap }}-*
+            targets-${{ inputs.keymap }}
+
+      - name: 'CI Discord Notification'
+        if: always()
+        working-directory: util/ci/
+        env:
+          DISCORD_WEBHOOK: ${{ secrets.CI_DISCORD_WEBHOOK }}
+        run: |
+          python3 -m pip install -r requirements.txt
+          python3 ./discord-results.py --branch ${{ inputs.branch || github.ref_name }} --keymap ${{ inputs.keymap }} --url ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}

.github/workflows/ci_builds.yml

@@ -1,74 +0,0 @@
-name: CI Builds
-
-permissions:
-  contents: read
-
-on:
-  push:
-    branches: [master, develop]
-  workflow_dispatch:
-    inputs:
-      branch:
-        type: choice
-        description: 'Branch to build'
-        options: [master, develop]
-
-concurrency: ci_build-${{ github.event.inputs.branch || github.ref_name }}
-
-jobs:
-  ci_builds:
-    if: github.repository == 'qmk/qmk_firmware'
-    name: "CI Build"
-    runs-on: self-hosted
-    timeout-minutes: 1380
-
-    strategy:
-      fail-fast: false
-      matrix:
-        keymap: [default, via]
-
-    container: ghcr.io/qmk/qmk_cli
-
-    steps:
-    - name: Disable safe.directory check
-      run : git config --global --add safe.directory '*'
-
-    - uses: actions/checkout@v4
-      with:
-        submodules: recursive
-        ref: ${{ github.event.inputs.branch || github.ref }}
-
-    - name: Install dependencies
-      run: pip3 install -r requirements.txt
-
-    - name: Run `qmk mass-compile` (keymap ${{ matrix.keymap }})
-      run: |
-        export NCPUS=$(nproc 2>/dev/null || sysctl -n hw.ncpu 2>/dev/null || getconf _NPROCESSORS_ONLN 2>/dev/null)
-        qmk mass-compile -t -j $NCPUS -km ${{ matrix.keymap }} -e DUMP_CI_METADATA=yes || touch .failed
-        # Generate the step summary markdown
-        ./util/ci/generate_failure_markdown.sh > $GITHUB_STEP_SUMMARY || true
-        # Truncate to a maximum of 1MB to deal with GitHub workflow limit
-        truncate --size='<960K' $GITHUB_STEP_SUMMARY || true
-        # Exit with failure if the compilation stage failed
-        [ ! -f .failed ] || exit 1
-
-    - name: 'Upload artifacts'
-      uses: actions/upload-artifact@v4
-      if: always()
-      with:
-        name: artifacts-${{ github.event.inputs.branch || github.ref_name }}-${{ matrix.keymap }}
-        if-no-files-found: ignore
-        path: |
-          *.bin
-          *.hex
-          *.uf2
-          .build/failed.*
-
-    - name: 'CI Discord Notification'
-      if: always()
-      working-directory: util/ci/
-      env:
-        DISCORD_WEBHOOK: ${{ secrets.CI_DISCORD_WEBHOOK }}
-      run: |
-        python3 -m pip install -r requirements.txt
-        python3 ./discord-results.py --branch ${{ github.event.inputs.branch || github.ref_name }} --keymap ${{ matrix.keymap }} --url ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}

.github/workflows/docs.yml

@@ -37,7 +37,7 @@ jobs:
         qmk --verbose generate-docs
 
     - name: Deploy
-      uses: JamesIves/github-pages-deploy-action@v4.5.0
+      uses: JamesIves/github-pages-deploy-action@v4.6.1
       with:
         GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         BASE_BRANCH: master

.github/workflows/format.yml

@@ -35,7 +35,7 @@ jobs:
 
     - name: Get changed files
       id: file_changes
-      uses: tj-actions/changed-files@v42
+      uses: tj-actions/changed-files@v44
       with:
         use_rest_api: true
 

.github/workflows/lint.yml

@@ -27,7 +27,7 @@ jobs:
 
     - name: Get changed files
       id: file_changes
-      uses: tj-actions/changed-files@v42
+      uses: tj-actions/changed-files@v44
       with:
         use_rest_api: true
 

.github/workflows/unit_test.yml

@@ -32,4 +32,4 @@ jobs:
     - name: Install dependencies
       run: pip3 install -r requirements-dev.txt
     - name: Run tests
-      run: make test:all
+      run: qmk test-c

.gitignore

@@ -37,6 +37,7 @@ quantum/version.h
 
 # DD config at wrong location
 /keyboards/**/keymaps/*/info.json
+/keyboards/**/keymaps/*/keyboard.json
 
 # Old-style QMK Makefiles
 /keyboards/**/Makefile

builddefs/build_keyboard.mk

@@ -119,7 +119,7 @@ MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
 MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
 MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
 
-# Pull in rules from info.json
+# Pull in rules from DD keyboard config
 INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/info_rules.mk)
 include $(INFO_RULES_MK)
 
@@ -221,7 +221,7 @@ include $(BUILDDEFS_PATH)/converters.mk
 MCU_ORIG := $(MCU)
 include $(wildcard $(PLATFORM_PATH)/*/mcu_selection.mk)
 
-# PLATFORM_KEY should be detected in info.json via key 'processor' (or rules.mk 'MCU')
+# PLATFORM_KEY should be detected in DD keyboard config via key 'processor' (or rules.mk 'MCU')
 ifeq ($(PLATFORM_KEY),)
     $(call CATASTROPHIC_ERROR,Platform not defined)
 endif
@@ -335,38 +335,54 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","")
     POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h
 endif
 
-# Pull in stuff from info.json
-INFO_JSON_FILES :=
+# Create dependencies on DD keyboard config - structure validated elsewhere
+DD_CONFIG_FILES :=
 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_1)/info.json
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_1)/info.json
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_2)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_2)/info.json
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_2)/info.json
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_3)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_3)/info.json
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_3)/info.json
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_4)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_4)/info.json
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_4)/info.json
 endif
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_5)/info.json
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_5)/info.json
+endif
+
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/keyboard.json)","")
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_1)/keyboard.json
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/keyboard.json)","")
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_2)/keyboard.json
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/keyboard.json)","")
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_3)/keyboard.json
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/keyboard.json)","")
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_4)/keyboard.json
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/keyboard.json)","")
+    DD_CONFIG_FILES += $(KEYBOARD_PATH_5)/keyboard.json
 endif
 
 CONFIG_H += $(INTERMEDIATE_OUTPUT)/src/info_config.h
 KEYBOARD_SRC += $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c
 
-$(INTERMEDIATE_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES)
+$(INTERMEDIATE_OUTPUT)/src/info_config.h: $(DD_CONFIG_FILES)
 	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
 	$(eval CMD=$(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/info_config.h)
 	@$(BUILD_CMD)
 
-$(INTERMEDIATE_OUTPUT)/src/default_keyboard.c: $(INFO_JSON_FILES)
+$(INTERMEDIATE_OUTPUT)/src/default_keyboard.c: $(DD_CONFIG_FILES)
 	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
 	$(eval CMD=$(QMK_BIN) generate-keyboard-c --quiet --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c)
 	@$(BUILD_CMD)
 
-$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h: $(INFO_JSON_FILES)
+$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h: $(DD_CONFIG_FILES)
 	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
 	$(eval CMD=$(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --include $(FOUND_KEYBOARD_H) --output $(INTERMEDIATE_OUTPUT)/src/default_keyboard.h)
 	@$(BUILD_CMD)
@@ -505,22 +521,14 @@ ifeq ($(strip $(KEEP_INTERMEDIATES)), yes)
     OPT_DEFS += -save-temps=obj
 endif
 
-# TODO: remove this bodge?
-PROJECT_DEFS := $(OPT_DEFS)
-PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
-PROJECT_CONFIG := $(CONFIG_H)
-
-CONFIG_H += $(POST_CONFIG_H)
-ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
-
 OUTPUTS := $(INTERMEDIATE_OUTPUT)
 $(INTERMEDIATE_OUTPUT)_SRC := $(SRC) $(PLATFORM_SRC)
-$(INTERMEDIATE_OUTPUT)_DEFS := $(OPT_DEFS) \
+$(INTERMEDIATE_OUTPUT)_DEFS := \
 	-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h\" \
 	-DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
-	$(PROJECT_DEFS)
-$(INTERMEDIATE_OUTPUT)_INC :=  $(VPATH) $(EXTRAINCDIRS) $(PROJECT_INC)
-$(INTERMEDIATE_OUTPUT)_CONFIG := $(CONFIG_H) $(PROJECT_CONFIG)
+	$(OPT_DEFS)
+$(INTERMEDIATE_OUTPUT)_INC :=  $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
+$(INTERMEDIATE_OUTPUT)_CONFIG := $(CONFIG_H) $(POST_CONFIG_H)
 
 # Default target.
 all: build check-size

builddefs/common_features.mk

@@ -340,7 +340,7 @@ LED_MATRIX_DRIVER := snled27351
 endif
 
 LED_MATRIX_ENABLE ?= no
-VALID_LED_MATRIX_TYPES := is31fl3218 is31fl3729 is31fl3731 is31fl3733 is31fl3736 is31fl3737 is31fl3741 is31fl3742a is31fl3743a is31fl3745 is31fl3746a snled27351 custom
+VALID_LED_MATRIX_TYPES := is31fl3218 is31fl3236 is31fl3729 is31fl3731 is31fl3733 is31fl3736 is31fl3737 is31fl3741 is31fl3742a is31fl3743a is31fl3745 is31fl3746a snled27351 custom
 
 ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
     ifeq ($(filter $(LED_MATRIX_DRIVER),$(VALID_LED_MATRIX_TYPES)),)
@@ -353,7 +353,7 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
     COMMON_VPATH += $(QUANTUM_DIR)/led_matrix/animations
     COMMON_VPATH += $(QUANTUM_DIR)/led_matrix/animations/runners
     POST_CONFIG_H += $(QUANTUM_DIR)/led_matrix/post_config.h
-    SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
+    SRC += $(QUANTUM_DIR)/process_keycode/process_led_matrix.c
     SRC += $(QUANTUM_DIR)/led_matrix/led_matrix.c
     SRC += $(QUANTUM_DIR)/led_matrix/led_matrix_drivers.c
     LIB8TION_ENABLE := yes
@@ -365,6 +365,12 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
         SRC += is31fl3218-mono.c
     endif
 
+    ifeq ($(strip $(LED_MATRIX_DRIVER)), is31fl3236)
+        I2C_DRIVER_REQUIRED = yes
+        COMMON_VPATH += $(DRIVER_PATH)/led/issi
+        SRC += is31fl3236-mono.c
+    endif
+
     ifeq ($(strip $(LED_MATRIX_DRIVER)), is31fl3729)
         I2C_DRIVER_REQUIRED = yes
         COMMON_VPATH += $(DRIVER_PATH)/led/issi
@@ -443,7 +449,7 @@ endif
 
 RGB_MATRIX_ENABLE ?= no
 
-VALID_RGB_MATRIX_TYPES := aw20216s is31fl3218 is31fl3729 is31fl3731 is31fl3733 is31fl3736 is31fl3737 is31fl3741 is31fl3742a is31fl3743a is31fl3745 is31fl3746a snled27351 ws2812 custom
+VALID_RGB_MATRIX_TYPES := aw20216s is31fl3218 is31fl3236 is31fl3729 is31fl3731 is31fl3733 is31fl3736 is31fl3737 is31fl3741 is31fl3742a is31fl3743a is31fl3745 is31fl3746a snled27351 ws2812 custom
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
     ifeq ($(filter $(RGB_MATRIX_DRIVER),$(VALID_RGB_MATRIX_TYPES)),)
         $(call CATASTROPHIC_ERROR,Invalid RGB_MATRIX_DRIVER,RGB_MATRIX_DRIVER="$(RGB_MATRIX_DRIVER)" is not a valid matrix type)
@@ -474,6 +480,12 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
         SRC += is31fl3218.c
     endif
 
+    ifeq ($(strip $(RGB_MATRIX_DRIVER)), is31fl3236)
+        I2C_DRIVER_REQUIRED = yes
+        COMMON_VPATH += $(DRIVER_PATH)/led/issi
+        SRC += is31fl3236.c
+    endif
+
     ifeq ($(strip $(RGB_MATRIX_DRIVER)), is31fl3729)
         I2C_DRIVER_REQUIRED = yes
         COMMON_VPATH += $(DRIVER_PATH)/led/issi

builddefs/converters.mk

@@ -5,8 +5,10 @@ ifneq ($(findstring yes, $(CTPC)$(CONVERT_TO_PROTON_C)),)
 $(call CATASTROPHIC_ERROR,The `CONVERT_TO_PROTON_C` and `CTPC` options are now deprecated. `CONVERT_TO=proton_c` should be used instead.)
 endif
 
-# TODO: opt in rather than assume everything uses a pro micro
-PIN_COMPATIBLE ?= promicro
+ifneq (,$(filter $(MCU),atmega32u4))
+    # TODO: opt in rather than assume everything uses a pro micro
+    PIN_COMPATIBLE ?= promicro
+endif
 
 # Remove whitespace from any rule.mk provided vars
 #   - env cannot be overwritten but cannot have whitespace anyway
@@ -16,6 +18,10 @@ ifneq ($(CONVERT_TO),)
     # stash so we can overwrite env provided vars if needed
     ACTIVE_CONVERTER=$(CONVERT_TO)
 
+    ifeq ($(PIN_COMPATIBLE),)
+        $(call CATASTROPHIC_ERROR,Converting to '$(CONVERT_TO)' not possible!)
+    endif
+
     # glob to search each platfrorm and/or check for valid converter
     CONVERTER := $(wildcard $(PLATFORM_PATH)/*/converters/$(PIN_COMPATIBLE)_to_$(CONVERT_TO)/)
     ifeq ($(CONVERTER),)

data/constants/keycodes/extras/keycodes_czech_mac_ansi_0.0.1.hjson

@@ -0,0 +1,580 @@
+{
+    "aliases": {
+/*
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
+ * │ \ │ + │ ě │ š │ č │ ř │ ž │ ý │ á │ í │ é │ = │ ' │     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
+ * │     │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ ú │ ) │ ¨ │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤
+ * │      │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ů │ § │      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴──────┤
+ * │        │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ - │        │
+ * ├─────┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
+ * │     │    │     │                       │     │    │     │
+ * └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
+ */
+       "KC_GRV": {
+            "key": "CZ_BSLS",
+            "label": "\\",
+        }
+        "KC_1": {
+            "key": "CZ_PLUS",
+            "label": "+",
+        }
+        "KC_2": {
+            "key": "CZ_ECAR",
+            "label": "ě",
+        }
+        "KC_3": {
+            "key": "CZ_SCAR",
+            "label": "š",
+        }
+        "KC_4": {
+            "key": "CZ_CCAR",
+            "label": "č",
+        }
+        "KC_5": {
+            "key": "CZ_RCAR",
+            "label": "ř",
+        }
+        "KC_6": {
+            "key": "CZ_ZCAR",
+            "label": "ž",
+        }
+        "KC_7": {
+            "key": "CZ_YACU",
+            "label": "ý",
+        }
+        "KC_8": {
+            "key": "CZ_AACU",
+            "label": "á",
+        }
+        "KC_9": {
+            "key": "CZ_IACU",
+            "label": "í",
+        }
+        "KC_0": {
+            "key": "CZ_EACU",
+            "label": "é",
+        }
+        "KC_MINS": {
+            "key": "CZ_EQL",
+            "label": "=",
+        }
+        "KC_EQL": {
+            "key": "CZ_ACUT",
+            "label": "' (dead)",
+        }
+        "KC_Q": {
+            "key": "CZ_Q",
+            "label": "Q",
+        }
+        "KC_W": {
+            "key": "CZ_W",
+            "label": "W",
+        }
+        "KC_E": {
+            "key": "CZ_E",
+            "label": "E",
+        }
+        "KC_R": {
+            "key": "CZ_R",
+            "label": "R",
+        }
+        "KC_T": {
+            "key": "CZ_T",
+            "label": "T",
+        }
+        "KC_Y": {
+            "key": "CZ_Z",
+            "label": "Z",
+        }
+        "KC_U": {
+            "key": "CZ_U",
+            "label": "U",
+        }
+        "KC_I": {
+            "key": "CZ_I",
+            "label": "I",
+        }
+        "KC_O": {
+            "key": "CZ_O",
+            "label": "O",
+        }
+        "KC_P": {
+            "key": "CZ_P",
+            "label": "P",
+        }
+        "KC_LBRC": {
+            "key": "CZ_UACU",
+            "label": "ú",
+        }
+        "KC_RBRC": {
+            "key": "CZ_RPRN",
+            "label": ")",
+        }
+        "KC_NUHS": {
+            "key": "CZ_DIAE",
+            "label": "¨ (dead)",
+        }
+        "KC_A": {
+            "key": "CZ_A",
+            "label": "A",
+        }
+        "KC_S": {
+            "key": "CZ_S",
+            "label": "S",
+        }
+        "KC_D": {
+            "key": "CZ_D",
+            "label": "D",
+        }
+        "KC_F": {
+            "key": "CZ_F",
+            "label": "F",
+        }
+        "KC_G": {
+            "key": "CZ_G",
+            "label": "G",
+        }
+        "KC_H": {
+            "key": "CZ_H",
+            "label": "H",
+        }
+        "KC_J": {
+            "key": "CZ_J",
+            "label": "J",
+        }
+        "KC_K": {
+            "key": "CZ_K",
+            "label": "K",
+        }
+        "KC_L": {
+            "key": "CZ_L",
+            "label": "L",
+        }
+        "KC_SCLN": {
+            "key": "CZ_URNG",
+            "label": "ů",
+        }
+        "KC_QUOT": {
+            "key": "CZ_SECT",
+            "label": "§",
+        }
+        "KC_Z": {
+            "key": "CZ_Y",
+            "label": "Y",
+        }
+        "KC_X": {
+            "key": "CZ_X",
+            "label": "X",
+        }
+        "KC_C": {
+            "key": "CZ_C",
+            "label": "C",
+        }
+        "KC_V": {
+            "key": "CZ_V",
+            "label": "V",
+        }
+        "KC_B": {
+            "key": "CZ_B",
+            "label": "B",
+        }
+        "KC_N": {
+            "key": "CZ_N",
+            "label": "N",
+        }
+        "KC_M": {
+            "key": "CZ_M",
+            "label": "M",
+        }
+        "KC_COMM": {
+            "key": "CZ_COMM",
+            "label": ",",
+        }
+        "KC_DOT": {
+            "key": "CZ_DOT",
+            "label": ".",
+        }
+        "KC_SLSH": {
+            "key": "CZ_MINS",
+            "label": "-",
+        }
+/* Shifted symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
+ * │ | │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ % │ ˇ │     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
+ * │     │   │   │   │   │   │   │   │   │   │   │ / │ ( │ ` │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤
+ * │      │   │   │   │   │   │   │   │   │   │ " │ ! │      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴──────┤
+ * │        │   │   │   │   │   │   │   │ ? │ : │ _ │        │
+ * ├─────┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
+ * │     │    │     │                       │     │    │     │
+ * └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
+ */
+        "S(CZ_BSLS)": {
+            "key": "CZ_PIPE",
+            "label": "|",
+        }
+        "S(CZ_PLUS)": {
+            "key": "CZ_1",
+            "label": "1",
+        }
+        "S(CZ_ECAR)": {
+            "key": "CZ_2",
+            "label": "2",
+        }
+        "S(CZ_SCAR)": {
+            "key": "CZ_3",
+            "label": "3",
+        }
+        "S(CZ_CCAR)": {
+            "key": "CZ_4",
+            "label": "4",
+        }
+        "S(CZ_RCAR)": {
+            "key": "CZ_5",
+            "label": "5",
+        }
+        "S(CZ_ZCAR)": {
+            "key": "CZ_6",
+            "label": "6",
+        }
+        "S(CZ_YACU)": {
+            "key": "CZ_7",
+            "label": "7",
+        }
+        "S(CZ_AACU)": {
+            "key": "CZ_8",
+            "label": "8",
+        }
+        "S(CZ_IACU)": {
+            "key": "CZ_9",
+            "label": "9",
+        }
+        "S(CZ_EACU)": {
+            "key": "CZ_0",
+            "label": "0",
+        }
+        "S(CZ_EQL)": {
+            "key": "CZ_PERC",
+            "label": "%",
+        }
+        "S(CZ_ACUT)": {
+            "key": "CZ_CARN",
+            "label": "ˇ (dead)",
+        }
+        "S(CZ_UACU)": {
+            "key": "CZ_SLSH",
+            "label": "/",
+        }
+        "S(CZ_RPRN)": {
+            "key": "CZ_LPRN",
+            "label": "(",
+        }
+         "S(CZ_DIAE)": {
+            "key": "CZ_GRV",
+            "label": "`",
+        }
+        "S(CZ_URNG)": {
+            "key": "CZ_DQUO",
+            "label": "\"",
+        }
+        "S(CZ_SECT)": {
+            "key": "CZ_EXLM",
+            "label": "!",
+        }
+        "S(CZ_COMM)": {
+            "key": "CZ_QUES",
+            "label": "?",
+        }
+        "S(CZ_DOT)": {
+            "key": "CZ_COLN",
+            "label": ":",
+        }
+        "S(CZ_MINS)": {
+            "key": "CZ_UNDS",
+            "label": "_",
+        }
+/* Alted symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
+ * │   │   │ @ │ # │ $ │ ~ │ ^ │ & │ * │ { │ } │ ° │ ^ │     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
+ * │     │   │ ė │ ę │ € │   │   │   │   │   │   │ [ │ ] │   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤
+ * │      │ ą │ ß │ ∂ │   │   │ ‘ │ ’ │   │ ł │ ; │ ' │      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴──────┤
+ * │        │   │   │   │   │   │ ‚ │   │ < │ > │ – │        │
+ * ├─────┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
+ * │     │    │     │                       │     │    │     │
+ * └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
+ */
+        "A(CZ_ECAR)": {
+            "key": "CZ_AT",
+            "label": "@",
+        }
+        "A(CZ_SCAR)": {
+            "key": "CZ_HASH",
+            "label": "#",
+        }
+        "A(CZ_CCAR)": {
+            "key": "CZ_DLR",
+            "label": "$",
+        }
+        "A(CZ_RCAR)": {
+            "key": "CZ_TILD",
+            "label": "~",
+        }
+        "A(CZ_ZCAR)": {
+            "key": "CZ_CIRC",
+            "label": "^",
+        }
+        "A(CZ_YACU)": {
+            "key": "CZ_AMPR",
+            "label": "&",
+        }
+        "A(CZ_AACU)": {
+            "key": "CZ_ASTR",
+            "label": "*",
+        }
+        "A(CZ_IACU)": {
+            "key": "CZ_LCBR",
+            "label": "{",
+        }
+        "A(CZ_EACU)": {
+            "key": "CZ_RCBR",
+            "label": "}",
+        }
+        "A(CZ_EQL)": {
+            "key": "CZ_RNGA",
+            "label": "° (dead)",
+        }
+        "A(CZ_ACUT)": {
+            "key": "CZ_DCIR",
+            "label": "^ (dead)",
+        }
+        "A(CZ_W)": {
+            "key": "CZ_LEDT",
+            "label": "ė",
+        }
+        "A(CZ_E)": {
+            "key": "CZ_LEOG",
+            "label": "ę",
+        }
+        "A(CZ_R)": {
+            "key": "CZ_EURO",
+            "label": "€",
+        }
+        "A(CZ_Z)": {
+            "key": "CZ_LZDT",
+            "label": "ż",
+        }
+        "A(CZ_UACU)": {
+            "key": "CZ_LBRC",
+            "label": "[",
+        }
+        "A(CZ_RPRN)": {
+            "key": "CZ_RBRC",
+            "label": "]",
+        }
+        "A(CZ_A)": {
+            "key": "CZ_LAOG",
+            "label": "ą",
+        }
+        "A(CZ_S)": {
+            "key": "CZ_SS",
+            "label": "ß",
+        }
+        "A(CZ_D)": {
+            "key": "CZ_PDIF",
+            "label": "∂",
+        }
+        "A(CZ_H)": {
+            "key": "CZ_LSQU",
+            "label": "‘",
+        }
+        "A(CZ_J)": {
+            "key": "CZ_RSQU",
+            "label": "’",
+        }
+        "A(CZ_L)": {
+            "key": "CZ_LLST",
+            "label": "ł",
+        }
+        "A(CZ_URNG)": {
+            "key": "CZ_SCLN",
+            "label": ";",
+        }
+        "A(CZ_SECT)": {
+            "key": "CZ_QUOT",
+            "label": "'",
+        }
+        "A(CZ_N)": {
+            "key": "CZ_SLQU",
+            "label": "‚",
+        }
+        "A(CZ_COMM)": {
+            "key": "CZ_LABK",
+            "label": "<",
+        }
+        "A(CZ_DOT)": {
+            "key": "CZ_RABK",
+            "label": ">",
+        }
+        "A(CZ_MINS)": {
+            "key": "CZ_NDSH",
+            "label": "–",
+        }
+/* Shift+Alted symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
+ * │   │ ¬ │ • │ ≠ │ £ │ ◊ │ † │ ¶ │ ÷ │ « │ » │ , │ - │     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
+ * │     │   │ Ė │ Ę │ ® │ ™ │ Ż │   │   │   │   │ ‹ │ › │ " │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤
+ * │      │ Ą │ ∑ │ ∆ │   │   │ “ │ ” │   │ Ł │ … │ ~ │      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴──────┤
+ * │        │   │   │ © │ √ │   │ „ │   │ ≤ │ ≥ │ — │        │
+ * ├─────┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
+ * │     │    │     │                       │     │    │     │
+ * └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
+ */
+        "S(A(CZ_1))": {
+            "key": "CZ_NOT",
+            "label": "¬",
+        }
+        "S(A(CZ_2))": {
+            "key": "CZ_BULT",
+            "label": "•",
+        }
+        "S(A(CZ_3))": {
+            "key": "CZ_NEQL",
+            "label": "≠",
+        }
+        "S(A(CZ_4))": {
+            "key": "CZ_PND",
+            "label": "£",
+        }
+        "S(A(CZ_5))": {
+            "key": "CZ_LOZN",
+            "label": "◊",
+        }
+        "S(A(CZ_6))": {
+            "key": "CZ_DAGG",
+            "label": "†",
+        }
+        "S(A(CZ_7))": {
+            "key": "CZ_PARA",
+            "label": "¶",
+        }
+        "S(A(CZ_8))": {
+            "key": "CZ_DIV",
+            "label": "÷",
+        }
+        "S(A(CZ_9))": {
+            "key": "CZ_LDAQ",
+            "label": "«",
+        }
+        "S(A(CZ_0))": {
+            "key": "CZ_RDAQ",
+            "label": "»",
+        }
+        "S(A(CZ_EQL))": {
+            "key": "CZ_DCOM",
+            "label": ", (dead)",
+        }
+        "S(A(CZ_ACUT))": {
+            "key": "CZ_DHPN",
+            "label": "- (dead)",
+        }
+        "S(A(CZ_W))": {
+            "key": "CZ_CEDT",
+            "label": "Ė",
+        }
+        "S(A(CZ_E))": {
+            "key": "CZ_CEOG",
+            "label": "Ę",
+        }
+        "S(A(CZ_R))": {
+            "key": "CZ_REGD",
+            "label": "®",
+        }
+        "S(A(CZ_T))": {
+            "key": "CZ_TM",
+            "label": "™",
+        }
+        "S(A(CZ_Z))": {
+            "key": "CZ_CZDT",
+            "label": "Ż",
+        }
+        "S(A(CZ_UACU))": {
+            "key": "CZ_LSAQ",
+            "label": "‹",
+        }
+        "S(A(CZ_RPRN))": {
+            "key": "CZ_RSAQ",
+            "label": "›",
+        }
+        "S(A(CZ_DIAE))": {
+            "key": "CZ_DDQT",
+            "label": "\" (dead)",
+        }
+        "S(A(CZ_A))": {
+            "key": "CZ_CAOG",
+            "label": "Ą",
+        }
+        "S(A(CZ_S))": {
+            "key": "CZ_NARS",
+            "label": "∑",
+        }
+        "S(A(CZ_D))": {
+            "key": "CZ_INCR",
+            "label": "∆",
+        }
+        "S(A(CZ_H))": {
+            "key": "CZ_LDQU",
+            "label": "“",
+        }
+        "S(A(CZ_J))": {
+            "key": "CZ_RDQU",
+            "label": "”",
+        }
+        "S(A(CZ_L))": {
+            "key": "CZ_CLST",
+            "label": "Ł",
+        }
+        "S(A(CZ_URNG))": {
+            "key": "CZ_ELLP",
+            "label": "…",
+        }
+        "S(A(CZ_SECT))": {
+            "key": "CZ_DTIL",
+            "label": "~ (dead)",
+        }
+        "S(A(CZ_C))": {
+            "key": "CZ_COPY",
+            "label": "©",
+        }
+        "S(A(CZ_V))": {
+            "key": "CZ_SQRT",
+            "label": "√",
+        }
+        "S(A(CZ_N))": {
+            "key": "CZ_DLQU",
+            "label": "„",
+        }
+        "S(A(CZ_COMM))": {
+            "key": "CZ_LEQL",
+            "label": "≤",
+        }
+        "S(A(CZ_DOT))": {
+            "key": "CZ_GEQL",
+            "label": "≥",
+        }
+        "S(A(CZ_MINS))": {
+            "key": "CZ_MDSH",
+            "label": "—",
+        }
+    }
+}

data/constants/keycodes/extras/keycodes_czech_mac_iso_0.0.1.hjson

@@ -0,0 +1,580 @@
+{
+    "aliases": {
+/*
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
+ * │   │ + │ ě │ š │ č │ ř │ ž │ ý │ á │ í │ é │ = │ ' │     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
+ * │     │ Q │ W │ E │ R │ T │ Z │ U │ I │ O │ P │ ú │ ) │   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐  │
+ * │      │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ů │ § │ ¨ │  │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴──┤
+ * │    │ \ │ Y │ X │ C │ V │ B │ N │ M │ , │ . │ - │        │
+ * ├────┴┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
+ * │     │    │     │                       │     │    │     │
+ * └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
+ */
+        "KC_1": {
+            "key": "CZ_PLUS",
+            "label": "+",
+        }
+        "KC_2": {
+            "key": "CZ_ECAR",
+            "label": "ě",
+        }
+        "KC_3": {
+            "key": "CZ_SCAR",
+            "label": "š",
+        }
+        "KC_4": {
+            "key": "CZ_CCAR",
+            "label": "č",
+        }
+        "KC_5": {
+            "key": "CZ_RCAR",
+            "label": "ř",
+        }
+        "KC_6": {
+            "key": "CZ_ZCAR",
+            "label": "ž",
+        }
+        "KC_7": {
+            "key": "CZ_YACU",
+            "label": "ý",
+        }
+        "KC_8": {
+            "key": "CZ_AACU",
+            "label": "á",
+        }
+        "KC_9": {
+            "key": "CZ_IACU",
+            "label": "í",
+        }
+        "KC_0": {
+            "key": "CZ_EACU",
+            "label": "é",
+        }
+        "KC_MINS": {
+            "key": "CZ_EQL",
+            "label": "=",
+        }
+        "KC_EQL": {
+            "key": "CZ_ACUT",
+            "label": "' (dead)",
+        }
+        "KC_Q": {
+            "key": "CZ_Q",
+            "label": "Q",
+        }
+        "KC_W": {
+            "key": "CZ_W",
+            "label": "W",
+        }
+        "KC_E": {
+            "key": "CZ_E",
+            "label": "E",
+        }
+        "KC_R": {
+            "key": "CZ_R",
+            "label": "R",
+        }
+        "KC_T": {
+            "key": "CZ_T",
+            "label": "T",
+        }
+        "KC_Y": {
+            "key": "CZ_Z",
+            "label": "Z",
+        }
+        "KC_U": {
+            "key": "CZ_U",
+            "label": "U",
+        }
+        "KC_I": {
+            "key": "CZ_I",
+            "label": "I",
+        }
+        "KC_O": {
+            "key": "CZ_O",
+            "label": "O",
+        }
+        "KC_P": {
+            "key": "CZ_P",
+            "label": "P",
+        }
+        "KC_LBRC": {
+            "key": "CZ_UACU",
+            "label": "ú",
+        }
+        "KC_RBRC": {
+            "key": "CZ_RPRN",
+            "label": ")",
+        }
+        "KC_A": {
+            "key": "CZ_A",
+            "label": "A",
+        }
+        "KC_S": {
+            "key": "CZ_S",
+            "label": "S",
+        }
+        "KC_D": {
+            "key": "CZ_D",
+            "label": "D",
+        }
+        "KC_F": {
+            "key": "CZ_F",
+            "label": "F",
+        }
+        "KC_G": {
+            "key": "CZ_G",
+            "label": "G",
+        }
+        "KC_H": {
+            "key": "CZ_H",
+            "label": "H",
+        }
+        "KC_J": {
+            "key": "CZ_J",
+            "label": "J",
+        }
+        "KC_K": {
+            "key": "CZ_K",
+            "label": "K",
+        }
+        "KC_L": {
+            "key": "CZ_L",
+            "label": "L",
+        }
+        "KC_SCLN": {
+            "key": "CZ_URNG",
+            "label": "ů",
+        }
+        "KC_QUOT": {
+            "key": "CZ_SECT",
+            "label": "§",
+        }
+        "KC_NUHS": {
+            "key": "CZ_DIAE",
+            "label": "¨ (dead)",
+        }
+        "KC_NUBS": {
+            "key": "CZ_BSLS",
+            "label": "\\",
+        }
+        "KC_Z": {
+            "key": "CZ_Y",
+            "label": "Y",
+        }
+        "KC_X": {
+            "key": "CZ_X",
+            "label": "X",
+        }
+        "KC_C": {
+            "key": "CZ_C",
+            "label": "C",
+        }
+        "KC_V": {
+            "key": "CZ_V",
+            "label": "V",
+        }
+        "KC_B": {
+            "key": "CZ_B",
+            "label": "B",
+        }
+        "KC_N": {
+            "key": "CZ_N",
+            "label": "N",
+        }
+        "KC_M": {
+            "key": "CZ_M",
+            "label": "M",
+        }
+        "KC_COMM": {
+            "key": "CZ_COMM",
+            "label": ",",
+        }
+        "KC_DOT": {
+            "key": "CZ_DOT",
+            "label": ".",
+        }
+        "KC_SLSH": {
+            "key": "CZ_MINS",
+            "label": "-",
+        }
+/* Shifted symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
+ * │   │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ % │ ˇ │     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
+ * │     │   │   │   │   │   │   │   │   │   │   │ / │ ( │   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐  │
+ * │      │   │   │   │   │   │   │   │   │   │ " │ ! │ ` │  │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴──┤
+ * │    │ | │   │   │   │   │   │   │   │ ? │ : │ _ │        │
+ * ├────┴┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
+ * │     │    │     │                       │     │    │     │
+ * └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
+ */
+        "S(CZ_PLUS)": {
+            "key": "CZ_1",
+            "label": "1",
+        }
+        "S(CZ_ECAR)": {
+            "key": "CZ_2",
+            "label": "2",
+        }
+        "S(CZ_SCAR)": {
+            "key": "CZ_3",
+            "label": "3",
+        }
+        "S(CZ_CCAR)": {
+            "key": "CZ_4",
+            "label": "4",
+        }
+        "S(CZ_RCAR)": {
+            "key": "CZ_5",
+            "label": "5",
+        }
+        "S(CZ_ZCAR)": {
+            "key": "CZ_6",
+            "label": "6",
+        }
+        "S(CZ_YACU)": {
+            "key": "CZ_7",
+            "label": "7",
+        }
+        "S(CZ_AACU)": {
+            "key": "CZ_8",
+            "label": "8",
+        }
+        "S(CZ_IACU)": {
+            "key": "CZ_9",
+            "label": "9",
+        }
+        "S(CZ_EACU)": {
+            "key": "CZ_0",
+            "label": "0",
+        }
+        "S(CZ_EQL)": {
+            "key": "CZ_PERC",
+            "label": "%",
+        }
+        "S(CZ_ACUT)": {
+            "key": "CZ_CARN",
+            "label": "ˇ (dead)",
+        }
+        "S(CZ_UACU)": {
+            "key": "CZ_SLSH",
+            "label": "/",
+        }
+        "S(CZ_RPRN)": {
+            "key": "CZ_LPRN",
+            "label": "(",
+        }
+        "S(CZ_URNG)": {
+            "key": "CZ_DQUO",
+            "label": "\"",
+        }
+        "S(CZ_SECT)": {
+            "key": "CZ_EXLM",
+            "label": "!",
+        }
+        "S(CZ_DIAE)": {
+            "key": "CZ_GRV",
+            "label": "`",
+        }
+        "S(CZ_BSLS)": {
+            "key": "CZ_PIPE",
+            "label": "|",
+        }
+        "S(CZ_COMM)": {
+            "key": "CZ_QUES",
+            "label": "?",
+        }
+        "S(CZ_DOT)": {
+            "key": "CZ_COLN",
+            "label": ":",
+        }
+        "S(CZ_MINS)": {
+            "key": "CZ_UNDS",
+            "label": "_",
+        }
+/* Alted symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
+ * │   │   │ @ │ # │ $ │ ~ │ ^ │ & │ * │ { │ } │ ° │ ^ │     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
+ * │     │   │ ė │ ę │ € │   │ ż │   │   │   │   │ [ │ ] │   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐  │
+ * │      │ ą │ ß │ ∂ │   │   │ ‘ │ ’ │   │ ł │ ; │ ' │   │  │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴──┤
+ * │    │   │   │   │   │   │   │ ‚ │   │ < │ > │ – │        │
+ * ├────┴┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
+ * │     │    │     │                       │     │    │     │
+ * └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
+ */
+        "A(CZ_ECAR)": {
+            "key": "CZ_AT",
+            "label": "@",
+        }
+        "A(CZ_SCAR)": {
+            "key": "CZ_HASH",
+            "label": "#",
+        }
+        "A(CZ_CCAR)": {
+            "key": "CZ_DLR",
+            "label": "$",
+        }
+        "A(CZ_RCAR)": {
+            "key": "CZ_TILD",
+            "label": "~",
+        }
+        "A(CZ_ZCAR)": {
+            "key": "CZ_CIRC",
+            "label": "^",
+        }
+        "A(CZ_YACU)": {
+            "key": "CZ_AMPR",
+            "label": "&",
+        }
+        "A(CZ_AACU)": {
+            "key": "CZ_ASTR",
+            "label": "*",
+        }
+        "A(CZ_IACU)": {
+            "key": "CZ_LCBR",
+            "label": "{",
+        }
+        "A(CZ_EACU)": {
+            "key": "CZ_RCBR",
+            "label": "}",
+        }
+        "A(CZ_EQL)": {
+            "key": "CZ_RNGA",
+            "label": "° (dead)",
+        }
+        "A(CZ_ACUT)": {
+            "key": "CZ_DCIR",
+            "label": "^ (dead)",
+        }
+        "A(CZ_W)": {
+            "key": "CZ_LEDT",
+            "label": "ė",
+        }
+        "A(CZ_E)": {
+            "key": "CZ_LEOG",
+            "label": "ę",
+        }
+        "A(CZ_R)": {
+            "key": "CZ_EURO",
+            "label": "€",
+        }
+        "A(CZ_Z)": {
+            "key": "CZ_LZDT",
+            "label": "ż",
+        }
+        "A(CZ_UACU)": {
+            "key": "CZ_LBRC",
+            "label": "[",
+        }
+        "A(CZ_RPRN)": {
+            "key": "CZ_RBRC",
+            "label": "]",
+        }
+        "A(CZ_A)": {
+            "key": "CZ_LAOG",
+            "label": "ą",
+        }
+        "A(CZ_S)": {
+            "key": "CZ_SS",
+            "label": "ß",
+        }
+        "A(CZ_D)": {
+            "key": "CZ_PDIF",
+            "label": "∂",
+        }
+        "A(CZ_H)": {
+            "key": "CZ_LSQU",
+            "label": "‘",
+        }
+        "A(CZ_J)": {
+            "key": "CZ_RSQU",
+            "label": "’",
+        }
+        "A(CZ_L)": {
+            "key": "CZ_LLST",
+            "label": "ł",
+        }
+        "A(CZ_URNG)": {
+            "key": "CZ_SCLN",
+            "label": ";",
+        }
+        "A(CZ_SECT)": {
+            "key": "CZ_QUOT",
+            "label": "'",
+        }
+        "A(CZ_N)": {
+            "key": "CZ_SLQU",
+            "label": "‚",
+        }
+        "A(CZ_COMM)": {
+            "key": "CZ_LABK",
+            "label": "<",
+        }
+        "A(CZ_DOT)": {
+            "key": "CZ_RABK",
+            "label": ">",
+        }
+        "A(CZ_MINS)": {
+            "key": "CZ_NDSH",
+            "label": "–",
+        }
+/* Shift+Alted symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
+ * │   │ ¬ │ • │ ≠ │ £ │ ◊ │ † │ ¶ │ ÷ │ « │ » │ , │ - │     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
+ * │     │   │ Ė │ Ę │ ® │ ™ │ Ż │   │   │   │   │ ‹ │ › │   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐  │
+ * │      │ Ą │ ∑ │ ∆ │   │   │ “ │ ” │   │ Ł │ … │ ~ │ " │  │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴──┤
+ * │    │   │   │   │ © │ √ │   │ „ │   │ ≤ │ ≥ │ — │        │
+ * ├────┴┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
+ * │     │    │     │                       │     │    │     │
+ * └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
+ */
+        "S(A(CZ_1))": {
+            "key": "CZ_NOT",
+            "label": "¬",
+        }
+        "S(A(CZ_2))": {
+            "key": "CZ_BULT",
+            "label": "•",
+        }
+        "S(A(CZ_3))": {
+            "key": "CZ_NEQL",
+            "label": "≠",
+        }
+        "S(A(CZ_4))": {
+            "key": "CZ_PND",
+            "label": "£",
+        }
+        "S(A(CZ_5))": {
+            "key": "CZ_LOZN",
+            "label": "◊",
+        }
+        "S(A(CZ_6))": {
+            "key": "CZ_DAGG",
+            "label": "†",
+        }
+        "S(A(CZ_7))": {
+            "key": "CZ_PARA",
+            "label": "¶",
+        }
+        "S(A(CZ_8))": {
+            "key": "CZ_DIV",
+            "label": "÷",
+        }
+        "S(A(CZ_9))": {
+            "key": "CZ_LDAQ",
+            "label": "«",
+        }
+        "S(A(CZ_0))": {
+            "key": "CZ_RDAQ",
+            "label": "»",
+        }
+        "S(A(CZ_EQL))": {
+            "key": "CZ_DCOM",
+            "label": ", (dead)",
+        }
+        "S(A(CZ_ACUT))": {
+            "key": "CZ_DHPN",
+            "label": "- (dead)",
+        }
+        "S(A(CZ_W))": {
+            "key": "CZ_CEDT",
+            "label": "Ė",
+        }
+        "S(A(CZ_E))": {
+            "key": "CZ_CEOG",
+            "label": "Ę",
+        }
+        "S(A(CZ_R))": {
+            "key": "CZ_REGD",
+            "label": "®",
+        }
+        "S(A(CZ_T))": {
+            "key": "CZ_TM",
+            "label": "™",
+        }
+        "S(A(CZ_Z))": {
+            "key": "CZ_CZDT",
+            "label": "Ż",
+        }
+        "S(A(CZ_UACU))": {
+            "key": "CZ_LSAQ",
+            "label": "‹",
+        }
+        "S(A(CZ_RPRN))": {
+            "key": "CZ_RSAQ",
+            "label": "›",
+        }
+        "S(A(CZ_A))": {
+            "key": "CZ_CAOG",
+            "label": "Ą",
+        }
+        "S(A(CZ_S))": {
+            "key": "CZ_NARS",
+            "label": "∑",
+        }
+        "S(A(CZ_D))": {
+            "key": "CZ_INCR",
+            "label": "∆",
+        }
+        "S(A(CZ_H))": {
+            "key": "CZ_LDQU",
+            "label": "“",
+        }
+        "S(A(CZ_J))": {
+            "key": "CZ_RDQU",
+            "label": "”",
+        }
+        "S(A(CZ_L))": {
+            "key": "CZ_CLST",
+            "label": "Ł",
+        }
+        "S(A(CZ_URNG))": {
+            "key": "CZ_ELLP",
+            "label": "…",
+        }
+        "S(A(CZ_SECT))": {
+            "key": "CZ_DTIL",
+            "label": "~ (dead)",
+        }
+        "S(A(CZ_DIAE))": {
+            "key": "CZ_DDQT",
+            "label": "\" (dead)",
+        }
+        "S(A(CZ_C))": {
+            "key": "CZ_COPY",
+            "label": "©",
+        }
+        "S(A(CZ_V))": {
+            "key": "CZ_SQRT",
+            "label": "√",
+        }
+        "S(A(CZ_N))": {
+            "key": "CZ_DLQU",
+            "label": "„",
+        }
+        "S(A(CZ_COMM))": {
+            "key": "CZ_LEQL",
+            "label": "≤",
+        }
+        "S(A(CZ_DOT))": {
+            "key": "CZ_GEQL",
+            "label": "≥",
+        }
+        "S(A(CZ_MINS))": {
+            "key": "CZ_MDSH",
+            "label": "—",
+        }
+    }
+}

data/constants/keycodes/extras/keycodes_spanish_latin_america_0.0.1.hjson

@@ -335,5 +335,9 @@
             "key": "ES_CIRC",
             "label": "^",
         }
+        "ALGR(KC_NUHS)": {
+            "key": "ES_GRV",
+            "label": "`",
+        }
     }
 }

data/constants/keycodes/keycodes_0.0.4_lighting.hjson

@@ -0,0 +1,239 @@
+{
+    "keycodes": {
+        "0x7810": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_ON",
+            "aliases": [
+                "LM_ON"
+            ]
+        },
+        "0x7811": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_OFF",
+            "aliases": [
+                "LM_OFF"
+            ]
+        },
+        "0x7812": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_TOGGLE",
+            "aliases": [
+                "LM_TOGG"
+            ]
+        },
+        "0x7813": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_MODE_NEXT",
+            "aliases": [
+                "LM_NEXT"
+            ]
+        },
+        "0x7814": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_MODE_PREVIOUS",
+            "aliases": [
+                "LM_PREV"
+            ]
+        },
+        "0x7815": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_BRIGHTNESS_UP",
+            "aliases": [
+                "LM_BRIU"
+            ]
+        },
+        "0x7816": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_BRIGHTNESS_DOWN",
+            "aliases": [
+                "LM_BRID"
+            ]
+        },
+        "0x7817": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_SPEED_UP",
+            "aliases": [
+                "LM_SPDU"
+            ]
+        },
+        "0x7818": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_SPEED_DOWN",
+            "aliases": [
+                "LM_SPDD"
+            ]
+        },
+
+        "0x7820": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_TOGGLE",
+            "aliases": [
+                "UG_TOGG"
+            ]
+        },
+        "0x7821": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_MODE_NEXT",
+            "aliases": [
+                "!reset!",
+                "UG_NEXT"
+            ]
+        },
+        "0x7822": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_MODE_PREVIOUS",
+            "aliases": [
+                "!reset!",
+                "UG_PREV"
+            ]
+        },
+        "0x7823": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_HUE_UP",
+            "aliases": [
+                "UG_HUEU"
+            ]
+        },
+        "0x7824": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_HUE_DOWN",
+            "aliases": [
+                "UG_HUED"
+            ]
+        },
+        "0x7825": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_SATURATION_UP",
+            "aliases": [
+                "UG_SATU"
+            ]
+        },
+        "0x7826": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_SATURATION_DOWN",
+            "aliases": [
+                "UG_SATD"
+            ]
+        },
+        "0x7827": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_VALUE_UP",
+            "aliases": [
+                "UG_VALU"
+            ]
+        },
+        "0x7828": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_VALUE_DOWN",
+            "aliases": [
+                "UG_VALD"
+            ]
+        },
+        "0x7829": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_SPEED_UP",
+            "aliases": [
+                "UG_SPDU"
+            ]
+        },
+        "0x782A": {
+            "group": "underglow",
+            "key": "QK_UNDERGLOW_SPEED_DOWN",
+            "aliases": [
+                "UG_SPDD"
+            ]
+        },
+
+        "0x7840": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_ON",
+            "aliases": [
+                "RM_ON"
+            ]
+        },
+        "0x7841": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_OFF",
+            "aliases": [
+                "RM_OFF"
+            ]
+        },
+        "0x7842": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_TOGGLE",
+            "aliases": [
+                "RM_TOGG"
+            ]
+        },
+        "0x7843": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_MODE_NEXT",
+            "aliases": [
+                "RM_NEXT"
+            ]
+        },
+        "0x7844": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_MODE_PREVIOUS",
+            "aliases": [
+                "RM_PREV"
+            ]
+        },
+        "0x7845": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_HUE_UP",
+            "aliases": [
+                "RM_HUEU"
+            ]
+        },
+        "0x7846": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_HUE_DOWN",
+            "aliases": [
+                "RM_HUED"
+            ]
+        },
+        "0x7847": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_SATURATION_UP",
+            "aliases": [
+                "RM_SATU"
+            ]
+        },
+        "0x7848": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_SATURATION_DOWN",
+            "aliases": [
+                "RM_SATD"
+            ]
+        },
+        "0x7849": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_VALUE_UP",
+            "aliases": [
+                "RM_VALU"
+            ]
+        },
+        "0x784A": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_VALUE_DOWN",
+            "aliases": [
+                "RM_VALD"
+            ]
+        },
+        "0x784B": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_SPEED_UP",
+            "aliases": [
+                "RM_SPDU"
+            ]
+        },
+        "0x784C": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_SPEED_DOWN",
+            "aliases": [
+                "RM_SPDD"
+            ]
+        }
+    }
+}

data/mappings/info_config.hjson

@@ -19,6 +19,8 @@
     // Audio
     "AUDIO_DEFAULT_ON": {"info_key": "audio.default.on", "value_type": "bool"},
     "AUDIO_DEFAULT_CLICKY_ON": {"info_key": "audio.default.clicky", "value_type": "bool"},
+    "AUDIO_POWER_CONTROL_PIN": {"info_key": "audio.power_control.pin"},
+    "AUDIO_POWER_CONTROL_PIN_ON_STATE": {"info_key": "audio.power_control.on_state", "value_type": "int" },
     "AUDIO_VOICES": {"info_key": "audio.voices", "value_type": "flag"},
     "SENDSTRING_BELL": {"info_key": "audio.macro_beep", "value_type": "flag"},
 
@@ -162,7 +164,6 @@
     "RGBLIGHT_DEFAULT_SAT": {"info_key": "rgblight.default.sat", "value_type": "int"},
     "RGBLIGHT_DEFAULT_VAL": {"info_key": "rgblight.default.val", "value_type": "int"},
     "RGBLIGHT_DEFAULT_SPD": {"info_key": "rgblight.default.speed", "value_type": "int"},
-    "RGBW": {"info_key": "rgblight.rgbw", "value_type": "flag"},
 
     // Secure
     "SECURE_IDLE_TIMEOUT": {"info_key": "secure.idle_timeout", "value_type": "int"},
@@ -213,6 +214,7 @@
     "WS2812_DI_PIN": {"info_key": "ws2812.pin"},
     "WS2812_I2C_ADDRESS": {"info_key": "ws2812.i2c_address", "value_type": "hex"},
     "WS2812_I2C_TIMEOUT": {"info_key": "ws2812.i2c_timeout", "value_type": "int"},
+    "WS2812_RGBW": {"info_key": "ws2812.rgbw", "value_type": "flag"},
 
     "LAYOUTS": {"info_key": "layout_aliases", "value_type": "mapping"},
 
@@ -227,6 +229,7 @@
     "PREVENT_STUCK_MODIFIERS": {"info_key": "_invalid.prevent_stuck_mods", "invalid": true},
     "QMK_KEYS_PER_SCAN": {"info_key": "qmk.keys_per_scan", "value_type": "int", "deprecated": true},
     "RGB_DI_PIN": {"info_key": "rgblight.pin", "invalid": true, "replace_with": "WS2812_DI_PIN or APA102_DI_PIN"},
+    "RGBW": {"info_key": "rgblight.rgbw", "invalid": true, "replace_with": "WS2812_RGBW"},
     "RGB_DISABLE_WHEN_USB_SUSPENDED": {"info_key": "_invalid.rgb_matrix_sleep", "invalid": true, "replace_with": "RGB_MATRIX_SLEEP"},
     "RGBLIGHT_ANIMATIONS": {"info_key": "_invalid.rgblight.animations.all", "value_type": "flag", "invalid": true},
     "TAPPING_FORCE_HOLD": {"info_key": "tapping.force_hold", "value_type": "flag", "deprecated": true},

data/mappings/info_rules.hjson

@@ -11,6 +11,7 @@
     // invalid: Default `false`. Set to `true` to generate errors when a value exists
     // replace_with: use with a key marked deprecated or invalid to designate a replacement
 
+    "AUDIO_DRIVER": {"info_key": "audio.driver"},
     "BACKLIGHT_DRIVER": {"info_key": "backlight.driver"},
     "BLUETOOTH_DRIVER": {"info_key": "bluetooth.driver"},
     "BOARD": {"info_key": "board"},
@@ -23,6 +24,7 @@
     "ENCODER_ENABLE": {"info_key": "encoder.enabled", "value_type": "bool"},
     "ENCODER_DRIVER": {"info_key": "encoder.driver"},
     "FIRMWARE_FORMAT": {"info_key": "build.firmware_format"},
+    "HAPTIC_DRIVER": {"info_key": "haptic.driver"},
     "KEYBOARD_SHARED_EP": {"info_key": "usb.shared_endpoint.keyboard", "value_type": "bool"},
     "LAYOUTS": {"info_key": "community_layouts", "value_type": "list"},
     "LED_MATRIX_DRIVER": {"info_key": "led_matrix.driver"},
@@ -43,7 +45,7 @@
     "SPLIT_TRANSPORT": {"info_key": "split.transport.protocol", "to_c": false},
     "STENO_ENABLE": {"info_key": "stenography.enabled", "value_type": "bool"},
     "STENO_PROTOCOL": {"info_key": "stenography.protocol"},
-    "WAIT_FOR_USB": {"info_key": "usb.wait_for", "value_type": "bool"},
+    "USB_WAIT_FOR_ENUMERATION": {"info_key": "usb.wait_for_enumeration", "value_type": "bool"},
     "WEAR_LEVELING_DRIVER": {"info_key": "eeprom.wear_leveling.driver"},
     "WS2812_DRIVER": {"info_key": "ws2812.driver"},
 

data/mappings/keyboard_aliases.hjson

@@ -306,13 +306,13 @@
         "target": "jacky_studio/piggy60/rev1"
     },
     "jj40": {
-        "target": "kprepublic/jj40"
+        "target": "kprepublic/jj40/rev1"
     },
     "jj4x4": {
         "target": "kprepublic/jj4x4"
     },
     "jj50": {
-        "target": "kprepublic/jj50"
+        "target": "kprepublic/jj50/rev1"
     },
     "jm60": {
         "target": "kbdfans/jm60"
@@ -1518,5 +1518,12 @@
     // Moved during 2023 Q4 cycle
     "ymdk/melody96": {
         "target": "ymdk/melody96/soldered"
+    },
+    // Moved during 2024 Q2 cycle
+    "kprepublic/jj40": {
+        "target": "kprepublic/jj40/rev1"
+    },
+    "kprepublic/jj50": {
+        "target": "kprepublic/jj50/rev1"
     }
 }

data/schemas/keyboard.jsonschema

@@ -133,8 +133,20 @@
                         "clicky": {"type": "boolean"}
                     }
                 },
+                "driver": {
+                    "type": "string",
+                    "enum": ["dac_additive", "dac_basic", "pwm_software", "pwm_hardware"]
+                },
                 "macro_beep": {"type": "boolean"},
                 "pins": {"$ref": "qmk.definitions.v1#/mcu_pin_array"},
+                "power_control": {
+                    "type": "object",
+                    "additionalProperties": false,
+                    "properties": {
+                        "on_state": {"$ref": "qmk.definitions.v1#/bit"},
+                        "pin": {"$ref": "qmk.definitions.v1#/mcu_pin"}
+                    }
+                },
                 "voices": {"type": "boolean"}
             }
         },
@@ -379,6 +391,15 @@
                 }
             }
         },
+        "haptic": {
+            "type": "object",
+            "properties": {
+                "driver": {
+                    "type": "string",
+                    "enum": ["drv2605l", "solenoid"]
+                }
+            }
+        },
         "leader_key": {
             "type": "object",
             "properties": {
@@ -445,6 +466,7 @@
                     "enum": [
                         "custom",
                         "is31fl3218",
+                        "is31fl3236",
                         "is31fl3729",
                         "is31fl3731",
                         "is31fl3733",
@@ -527,6 +549,7 @@
                         "aw20216s",
                         "custom",
                         "is31fl3218",
+                        "is31fl3236",
                         "is31fl3729",
                         "is31fl3731",
                         "is31fl3733",
@@ -638,7 +661,10 @@
                     "$ref": "qmk.definitions.v1#/mcu_pin",
                     "$comment": "Deprecated: use ws2812.pin instead"
                 },
-                "rgbw": {"type": "boolean"},
+                "rgbw": {
+                    "type": "boolean",
+                    "$comment": "Deprecated: use ws2812.rgbw instead"
+                },
                 "saturation_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
                 "sleep": {"type": "boolean"},
                 "split": {"type": "boolean"},
@@ -779,7 +805,7 @@
                     "properties": {
                         "protocol": {
                             "type": "string",
-                            "enum": ["custom", "i2c", "serial", "serial_usart"]
+                            "enum": ["custom", "i2c", "serial"]
                         },
                         "sync": {
                             "type": "object",
@@ -875,7 +901,7 @@
                     }
                 },
                 "suspend_wakeup_delay": {"$ref": "qmk.definitions.v1#/unsigned_int"},
-                "wait_for": {"type": "boolean"}
+                "wait_for_enumeration": {"type": "boolean"}
             }
         },
         "qmk": {
@@ -914,6 +940,7 @@
                     "enum": ["bitbang", "custom", "i2c", "pwm", "spi", "vendor"]
                 },
                 "pin": {"$ref": "qmk.definitions.v1#/mcu_pin"},
+                "rgbw": {"type": "boolean"},
                 "i2c_address": {"$ref": "qmk.definitions.v1#/hex_number_2d"},
                 "i2c_timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"}
             }

data/templates/keyboard/config.h

@@ -1,20 +0,0 @@
-// Copyright %YEAR% %REAL_NAME% (@%USER_NAME%)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

docs/ChangeLog/20240526/PR23309.md

@@ -0,0 +1,35 @@
+# MechKeys ACR60 Layout Updates ([#23309](https://github.com/qmk/qmk_firmware/pull/23309))
+
+This PR removed and changed some of the layouts that were configured for
+the ACR60. If you use one of the following layouts, you will need to
+update your keymap:
+
+- [`LAYOUT_hhkb`](#layout-hhkb)
+- [`LAYOUT_true_hhkb`](#layout-true-hhkb)
+- [`LAYOUT_directional`](#layout-directional)
+- [`LAYOUT_mitchsplit`](#layout-mitchsplit)
+
+## `LAYOUT_hhkb` :id=layout-hhkb
+
+1. Change your layout macro to `LAYOUT_60_hhkb`.
+2. Remove any keycodes for the key between Left Shift and QWERTY Z.
+
+## `LAYOUT_true_hhkb` :id=layout-true-hhkb
+
+1. Change your layout macro to `LAYOUT_60_true_hhkb`.
+2. Remove any keycodes for the key between Left Shift and QWERTY Z.
+
+## `LAYOUT_directional` :id=layout-directional
+
+1. Change your layout macro to `LAYOUT_60_ansi_arrow_split_bs`.
+2. Remove any keycodes for the key between Left Shift and QWERTY Z.
+3. Remove any keycodes for the keys immediately before *and* after the
+1.25u key of Split Spacebar.
+
+If you need split spacebars, you may implement
+`LAYOUT_60_ansi_arrow_split_space_split_bs` and change your layout to
+it, removing the keycode between Left Shift and QWERTY Z.
+
+## `LAYOUT_mitchsplit` :id=layout-mitchsplit
+
+1. Use `LAYOUT_60_ansi_split_space_split_rshift`.

docs/ChangeLog/20240526/PR23329.md

@@ -0,0 +1,13 @@
+# P3D Spacey Layout Updates ([#23329](https://github.com/qmk/qmk_firmware/pull/23329))
+
+This PR removed the `LAYOUT` macro that was configured for the Spacey.
+If you have a keymap for this keyboard, you will need to update your
+keymap using the following steps:
+
+1. Change your layout macro to `LAYOUT_all`.
+2. Remove the two `KC_NO` keycodes following the Space and Delete keys
+   on the bottom row.
+3. Move the keycode for the encoder pushbutton (customarily Mute) to the
+   end of the top row, after the customary Backspace key.
+4. Move the keycode for the Right Arrow to the end of the Shift row,
+   after the Down Arrow key.

docs/__capabilities.md

@@ -0,0 +1,261 @@
+# Documentation Capabilities
+
+This page lays out the capabilities used by the QMK Firmware documentation, in order to aid future transitions to other page generators. Focuses mainly on things other than normal Markdown, as it's assumed that markdown generators should still function accordingly.
+
+## Overall capabilities
+
+Unrelated to styling, high-level tech.
+
+* I18n -- translations to other languages: [_langs.md](_langs.md)
+* Sidebar -- listing of pages by category: [_summary.md](_summary.md)
+* Title anchors -- `:id=some-anchor-name`, used for direct linking to sections
+    * Links to anchors:
+        * Style 1: [early initialization](platformdev_chibios_earlyinit.md?id=board-init)
+        * Style 2: [early initialization](platformdev_chibios_earlyinit.md#board-init)
+        * Links to anchors on the same page, i.e. [Emoji](#emoji)
+* Specifying CNAME for root domain -- `docs.qmk.fm`
+* Moved pages, see `index.html`
+* Text search
+* Footnotes [like this][1]
+
+<!-- Comments should not show up -->
+
+<!-- Nor should
+     multiline
+     
+     comments with
+     
+     newlines show up -->
+     
+     
+### Dividing lines
+
+---
+
+<hr>
+
+<hr/>
+
+### Images
+
+![QMK Color Wheel with HSV Values](https://i.imgur.com/vkYVo66.jpg)
+
+<img src="gitbook/images/color-wheel.svg" alt="HSV Color Wheel" width="250"/>
+
+### Lists
+
+Newlines with `<br>`:
+
+Line one<br>
+Line two<br/>
+Line three
+
+Nested dotted:
+
+* The PR is complete and ready to merge
+* GitHub checks for the PR are green whenever possible
+    * A "red" check may be disregarded by maintainers if the items flagged are unrelated to the change proposed in the PR
+        * Modifications to existing files should not need to add license headers to pass lint, for instance.
+        * If it's not directly related to your PR's functionality, prefer avoiding making a change.
+
+Nested dashed:
+
+- The PR is complete and ready to merge
+- GitHub checks for the PR are green whenever possible
+    - A "red" check may be disregarded by maintainers if the items flagged are unrelated to the change proposed in the PR
+        - Modifications to existing files should not need to add license headers to pass lint, for instance.
+        - If it's not directly related to your PR's functionality, prefer avoiding making a change.
+
+Nested numbered:
+
+1. The PR is complete and ready to merge
+1. GitHub checks for the PR are green whenever possible
+    1. A "red" check may be disregarded by maintainers if the items flagged are unrelated to the change proposed in the PR
+        1. Modifications to existing files should not need to add license headers to pass lint, for instance.
+        1. If it's not directly related to your PR's functionality, prefer avoiding making a change.
+        
+Nested mixed:
+
+1. Add it to the schema in `data/schemas/keyboards.jsonschema`
+1. Add a mapping in `data/maps`
+1. (optional and discouraged) Add code to extract/generate it to:
+  * `lib/python/qmk/info.py`
+  * `lib/python/qmk/cli/generate/config_h.py`
+  * `lib/python/qmk/cli/generate/rules_mk.py`
+
+### Emoji :id=emoji
+
+#### Direct:
+
+👍🎉 First off, thanks for taking the time to read this and contribute! 🎉👍
+
+#### As colon-name-colon:
+
+:heavy_check_mark: : works and was tested
+
+:o: : does not apply
+
+:x: : not supported by MCU
+
+### XML Entities
+
+[`clueboard`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard)  &larr; This is the organization folder, there's no `rules.mk` file
+
+1&ndash;4
+
+Command+<code>&#96;</code>
+
+## Styling
+
+### CSS-ish
+
+<b style="font-size:150%">This is 150% of normal sizing, and bold!</b>
+
+
+### Tables
+
+| Column A | Column B |
+|----------|----------|
+| Left     | Right    |
+
+### Indented sections
+
+> Indent without any sort of marker
+
+?> Query, this?
+
+!> Notification, damnit!
+
+### Keyboard keys
+
+<kbd>,</kbd>
+
+<kbd>Right Alt</kbd>+<kbd>Right Shift</kbd>
+
+1. Click <kbd>File</kbd> > <kbd>New</kbd> > <kbd>Makefile Project with Existing Code</kbd>
+
+1. Click <kbd><kbd>File</kbd> > <kbd>Preferences ></kbd> > <kbd>Settings</kbd> </kbd>
+
+1. Hit Ctrl-<code>&#96;</code> (Grave) to bring up the terminal or go to <kbd><kbd>View</kbd> > <kbd>Terminal</kbd></kbd> (command `workbench.action.terminal.toggleTerminal`). A new terminal will be opened if there isn‘t one already.
+
+   This should start the terminal in the workspace's folder (so the `qmk_firmware` folder), and then you can compile your keyboard. 
+
+
+### Code Blocks
+
+Inline code with tag: <code>test</code>
+
+Inline code with backticks: `test`
+
+    This is preformatted
+    Indented by 4 spaces
+    The letters lined up
+
+```c
+int c_code(void) {
+    return -1;
+}
+```
+
+```makefile
+ifeq ($(BUILD),)
+     CHUNDER_REQUIRED = yes
+endif
+```
+
+```python
+from pathlib import Path
+
+p = Path('/path/to/qmk_firmware')
+```
+
+```json
+{
+    "a": "b",
+    "c": 4,
+    "d": {
+        "e": [
+            0, 1, 2, 3
+        ]
+    }
+}
+```
+
+```diff
+ #undef RGBLIGHT_LED_COUNT
++#undef RGBLIGHT_EFFECT_STATIC_GRADIENT
++#undef RGBLIGHT_EFFECT_RAINBOW_SWIRL
+ #define RGBLIGHT_LED_COUNT 12
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+```
+
+Indented code as part of a list:
+
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
+* [Teensy Loader](https://www.pjrc.com/teensy/loader.html)
+* [Teensy Loader Command Line](https://www.pjrc.com/teensy/loader_cli.html) / `:teensy` target in QMK (recommended command line)
+  ```
+  teensy_loader_cli -v -mmcu=<mcu> <filename>
+  ```
+
+
+### Sub/Superscript
+
+<sub>This is subscripted, apparently.</sub>
+
+<sup>This is superscripted, apparently.</sup>
+
+I<sup>2</sup>C
+
+T<sub>0H</sub>, T<sub>0L</sub>
+
+### Tabs
+
+Tabs are based on section headers, with `**` enclosing the tab title.
+
+<!-- tabs:start -->
+
+#### ** Tab one **
+
+Content one
+
+<!-- tabs:start -->
+
+##### ** Nested one **
+
+Nested content one
+
+##### ** Nested two **
+
+Nested content two
+
+<!-- tabs:end -->
+
+#### ** Tab two **
+
+Content two
+
+#### ** Tab three **
+
+Content three
+
+<!-- tabs:end -->
+
+## Details sections
+
+Expandable:
+
+<details>
+    <summary>Some summary text that shows up before expanding</summary>
+
+!> Embedded notification!
+
+This is some inner content.
+</details>
+
+  [1]: https://en.wikipedia.org/wiki/Eclipse_(software)
+
+## Embed
+
+[example embed](__capabilities_inc.md ':include')

docs/__capabilities_inc.md

@@ -0,0 +1 @@
+Lorem ipsum dolor sit amet.

docs/cli_commands.md

@@ -322,6 +322,18 @@ Creates a keymap.json from a keymap.c.
 qmk c2json -km KEYMAP -kb KEYBOARD [-q] [--no-cpp] [-o OUTPUT] filename
 ```
 
+**Examples**:
+
+```
+qmk c2json -km default -kb handwired/dactyl_promicro
+```
+
+or with filename:
+
+```
+qmk c2json keyboards/handwired/dactyl_promicro/keymaps/default/keymap.c
+```
+
 ## `qmk lint`
 
 Checks over a keyboard and/or keymap and highlights common errors, problems, and anti-patterns.
@@ -791,3 +803,39 @@ This command converts a TTF font to an intermediate format for editing, before c
 
 This command converts an intermediate font image to the QFF File Format. See the [Quantum Painter](quantum_painter.md?id=quantum-painter-cli) documentation for more information on this command.
 
+## `qmk test-c`
+
+This command runs the C unit test suite. If you make changes to C code you should ensure this runs successfully.
+
+**Usage**:
+
+```
+qmk test-c [-h] [-t TEST] [-l] [-c] [-e ENV] [-j PARALLEL]
+
+options:
+  -h, --help            show this help message and exit
+  -t TEST, --test TEST  Test to run from the available list. Supports wildcard globs. May be passed multiple times.
+  -l, --list            List available tests.
+  -c, --clean           Remove object files before compiling.
+  -e ENV, --env ENV     Set a variable to be passed to make. May be passed multiple times.
+  -j PARALLEL, --parallel PARALLEL
+                        Set the number of parallel make jobs; 0 means unlimited.
+```
+
+**Examples**:
+
+Run entire test suite:
+
+    qmk test-c
+
+List available tests:
+
+    qmk test-c --list
+
+Run matching test:
+
+    qmk test-c --test unicode*
+
+Run single test:
+
+    qmk test-c --test basic

docs/config_options.md

@@ -237,7 +237,7 @@ If you define these options you will enable the associated feature, which may in
   * units to step when in/decreasing saturation
 * `#define RGBLIGHT_VAL_STEP 12`
   * units to step when in/decreasing value (brightness)
-* `#define RGBW`
+* `#define WS2812_RGBW`
   * Enables RGBW LED support
 
 ## Mouse Key Options
@@ -446,7 +446,7 @@ Use these to enable or disable building certain features. The more you have enab
   * Allows replacing the standard matrix scanning routine with a custom one.
 * `DEBOUNCE_TYPE`
   * Allows replacing the standard key debouncing routine with an alternative or custom one.
-* `WAIT_FOR_USB`
+* `USB_WAIT_FOR_ENUMERATION`
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.

docs/feature_audio.md

@@ -171,29 +171,31 @@ The available keycodes for audio are:
 
 ## Audio Config
 
-| Settings                        | Default              | Description                                                                   |
-|---------------------------------|----------------------|-------------------------------------------------------------------------------|
-|`AUDIO_PIN`                      | *Not defined*        |Configures the pin that the speaker is connected to.                           |
-|`AUDIO_PIN_ALT`                  | *Not defined*        |Configures the pin for a second speaker or second pin connected to one speaker.|
-|`AUDIO_PIN_ALT_AS_NEGATIVE`      | *Not defined*        |Enables support for one speaker connected to two pins.                         |
-|`AUDIO_INIT_DELAY`               | *Not defined*        |Enables delay during startup song to accomidate for USB startup issues.        |
-|`AUDIO_ENABLE_TONE_MULTIPLEXING` | *Not defined*        |Enables time splicing/multiplexing to create multiple tones simutaneously.     |
-|`STARTUP_SONG`                   | `STARTUP_SOUND`      |Plays when the keyboard starts up (audio.c)                                    |
-|`GOODBYE_SONG`                   | `GOODBYE_SOUND`      |Plays when you press the QK_BOOT key (quantum.c)                               |
-|`AG_NORM_SONG`                   | `AG_NORM_SOUND`      |Plays when you press AG_NORM (process_magic.c)                                 |
-|`AG_SWAP_SONG`                   | `AG_SWAP_SOUND`      |Plays when you press AG_SWAP (process_magic.c)                                 |
-|`CG_NORM_SONG`                   | `AG_NORM_SOUND`      |Plays when you press CG_NORM (process_magic.c)                                 |
-|`CG_SWAP_SONG`                   | `AG_SWAP_SOUND`      |Plays when you press CG_SWAP (process_magic.c)                                 |
-|`MUSIC_ON_SONG`                  | `MUSIC_ON_SOUND`     |Plays when music mode is activated (process_music.c)                           |
-|`MUSIC_OFF_SONG`                 | `MUSIC_OFF_SOUND`    |Plays when music mode is deactivated (process_music.c)                         |
-|`MIDI_ON_SONG`                   | `MUSIC_ON_SOUND`     |Plays when midi mode is activated (process_music.c)                            |
-|`MIDI_OFF_SONG`                  | `MUSIC_OFF_SOUND`    |Plays when midi mode is deactivated (process_music.c)                          |
-|`CHROMATIC_SONG`                 | `CHROMATIC_SOUND`    |Plays when the chromatic music mode is selected (process_music.c)              |
-|`GUITAR_SONG`                    | `GUITAR_SOUND`       |Plays when the guitar music mode is selected (process_music.c)                 |
-|`VIOLIN_SONG`                    | `VIOLIN_SOUND`       |Plays when the violin music mode is selected (process_music.c)                 |
-|`MAJOR_SONG`                     | `MAJOR_SOUND`        |Plays when the major music mode is selected (process_music.c)                  |
-|`DEFAULT_LAYER_SONGS`            | *Not defined*        |Plays song when switched default layers with [`set_single_persistent_default_layer(layer)`](ref_functions.md#setting-the-persistent-default-layer)(quantum.c)       |
-|`SENDSTRING_BELL`                | *Not defined*        |Plays chime when the "enter" ("\a") character is sent (send_string.c)          |
+| Settings                         | Default              | Description                                                                                 |
+|----------------------------------|----------------------|---------------------------------------------------------------------------------------------|
+|`AUDIO_PIN`                       | *Not defined*        |Configures the pin that the speaker is connected to.                                         |
+|`AUDIO_PIN_ALT`                   | *Not defined*        |Configures the pin for a second speaker or second pin connected to one speaker.              |
+|`AUDIO_PIN_ALT_AS_NEGATIVE`       | *Not defined*        |Enables support for one speaker connected to two pins.                                       |
+|`AUDIO_INIT_DELAY`                | *Not defined*        |Enables delay during startup song to accomidate for USB startup issues.                      |
+|`AUDIO_ENABLE_TONE_MULTIPLEXING`  | *Not defined*        |Enables time splicing/multiplexing to create multiple tones simutaneously.                   |
+|`AUDIO_POWER_CONTROL_PIN`         | *Not defined*        |Enables power control code to enable or cut off power to speaker (such as with PAM8302 amp). |
+|`AUDIO_POWER_CONTROL_PIN_ON_STATE`| `1`                  |The state of the audio power control pin when audio is "on" - `1` for high, `0` for low.     |
+|`STARTUP_SONG`                    | `STARTUP_SOUND`      |Plays when the keyboard starts up (audio.c)                                                  |
+|`GOODBYE_SONG`                    | `GOODBYE_SOUND`      |Plays when you press the QK_BOOT key (quantum.c)                                             |
+|`AG_NORM_SONG`                    | `AG_NORM_SOUND`      |Plays when you press AG_NORM (process_magic.c)                                               |
+|`AG_SWAP_SONG`                    | `AG_SWAP_SOUND`      |Plays when you press AG_SWAP (process_magic.c)                                               |
+|`CG_NORM_SONG`                    | `AG_NORM_SOUND`      |Plays when you press CG_NORM (process_magic.c)                                               |
+|`CG_SWAP_SONG`                    | `AG_SWAP_SOUND`      |Plays when you press CG_SWAP (process_magic.c)                                               |
+|`MUSIC_ON_SONG`                   | `MUSIC_ON_SOUND`     |Plays when music mode is activated (process_music.c)                                         |
+|`MUSIC_OFF_SONG`                  | `MUSIC_OFF_SOUND`    |Plays when music mode is deactivated (process_music.c)                                       |
+|`MIDI_ON_SONG`                    | `MUSIC_ON_SOUND`     |Plays when midi mode is activated (process_music.c)                                          |
+|`MIDI_OFF_SONG`                   | `MUSIC_OFF_SOUND`    |Plays when midi mode is deactivated (process_music.c)                                        |
+|`CHROMATIC_SONG`                  | `CHROMATIC_SOUND`    |Plays when the chromatic music mode is selected (process_music.c)                            |
+|`GUITAR_SONG`                     | `GUITAR_SOUND`       |Plays when the guitar music mode is selected (process_music.c)                               |
+|`VIOLIN_SONG`                     | `VIOLIN_SOUND`       |Plays when the violin music mode is selected (process_music.c)                               |
+|`MAJOR_SONG`                      | `MAJOR_SOUND`        |Plays when the major music mode is selected (process_music.c)                                |
+|`DEFAULT_LAYER_SONGS`             | *Not defined*        |Plays song when switched default layers with [`set_single_persistent_default_layer(layer)`](ref_functions.md#setting-the-persistent-default-layer)(quantum.c). |
+|`SENDSTRING_BELL`                 | *Not defined*        |Plays chime when the "enter" ("\a") character is sent (send_string.c)                        |
 
 ## Tempo
 the 'speed' at which SONGs are played is dictated by the set Tempo, which is measured in beats-per-minute. Note lengths are defined relative to that.

docs/feature_combo.md

@@ -17,11 +17,12 @@ combo_t key_combos[] = {
 
 This will send "Escape" if you hit the A and B keys, and Ctrl+Z when you hit the C and D keys.
 
-## Mod-Tap Support
-[Mod-Tap](mod_tap.md) feature is also supported together with combos. You will need to use the full Mod-Tap keycode in the combo definition, e.g.:
+## Advanced Keycodes Support
+Advanced keycodes, such as [Mod-Tap](mod_tap.md) and [Tap Dance](feature_tap_dance.md) are also supported together with combos. If you use these advanced keycodes in your keymap, you will need to place the full keycode in the combo definition, e.g.:
 
 ```c
 const uint16_t PROGMEM test_combo1[] = {LSFT_T(KC_A), LT(1, KC_B), COMBO_END};
+const uint16_t PROGMEM test_combo2[] = {TD(TD_ESC_CAPS), KC_F1, COMBO_END};
 ```
 
 ## Overlapping Combos

docs/feature_led_matrix.md

@@ -217,16 +217,17 @@ As mentioned earlier, the center of the keyboard by default is expected to be `{
 
 ## Keycodes :id=keycodes
 
-All LED matrix keycodes are currently shared with the [Backlight feature](feature_backlight.md).
-
-| Key                     | Aliases   | Description                   |
-|-------------------------|-----------|-------------------------------|
-| `QK_BACKLIGHT_TOGGLE`   | `BL_TOGG` | Toggle LED Matrix on or off   |
-| `QK_BACKLIGHT_STEP`     | `BL_STEP` | Cycle through modes           |
-| `QK_BACKLIGHT_ON`       | `BL_ON`   | Turn on LED Matrix            |
-| `QK_BACKLIGHT_OFF`      | `BL_OFF`  | Turn off LED Matrix           |
-| `QK_BACKLIGHT_UP`       | `BL_UP`   | Increase the brightness level |
-| `QK_BACKLIGHT_DOWN`     | `BL_DOWN` | Decrease the brightness level |
+|Key                            |Aliases  |Description                        |
+|-------------------------------|---------|-----------------------------------|
+|`QK_LED_MATRIX_ON`             |`LM_ON`  |Turn on LED Matrix                 |
+|`QK_LED_MATRIX_OFF`            |`LM_OFF` |Turn off LED Matrix                |
+|`QK_LED_MATRIX_TOGGLE`         |`LM_TOGG`|Toggle LED Matrix on or off        |
+|`QK_LED_MATRIX_MODE_NEXT`      |`LM_NEXT`|Cycle through animations           |
+|`QK_LED_MATRIX_MODE_PREVIOUS`  |`LM_PREV`|Cycle through animations in reverse|
+|`QK_LED_MATRIX_BRIGHTNESS_UP`  |`LM_BRIU`|Increase the brightness level      |
+|`QK_LED_MATRIX_BRIGHTNESS_DOWN`|`LM_BRID`|Decrease the brightness level      |
+|`QK_LED_MATRIX_SPEED_UP`       |`LM_SPDU`|Increase the animation speed       |
+|`QK_LED_MATRIX_SPEED_DOWN`     |`LM_SPDD`|Decrease the animation speed       |
 
 ## LED Matrix Effects :id=led-matrix-effects
 

docs/feature_pointing_device.md

@@ -780,6 +780,9 @@ There are several functions that allow for more advanced interaction with the au
 | `get_auto_mouse_timeout(void)`                             | Return the current timeout for turing off the layer                                  |                           |      `uint16_t` |
 | `set_auto_mouse_debounce(uint16_t timeout)`                | Change/set the debounce for preventing layer activation                              |                           |    `void`(None) |
 | `get_auto_mouse_debounce(void)`                            | Return the current debounce for preventing layer activation                          |                           |       `uint8_t` |
+| `is_auto_mouse_active(void)`                               | Returns the active state of the auto mouse layer (eg if the layer has been triggered)|                           |          `bool` |
+| `get_auto_mouse_key_tracker(void)`                         | Gets the current count for the auto mouse key tracker.                               |                           |        `int8_t` |
+| `set_auto_mouse_key_tracker(int8_t key_tracker)`           | Sets/Overrides the current count for the auto mouse key tracker.                     |                           |    `void`(None) |
 
 _NOTES:_   
     - _Due to the nature of how some functions work, the `auto_mouse_trigger_reset`, and `auto_mouse_layer_off` functions should never be called in the `layer_state_set_*` stack as this can cause indefinite loops._   

docs/feature_rgblight.md

@@ -6,7 +6,7 @@ QMK has the ability to control RGB LEDs attached to your keyboard. This is commo
 
 Some keyboards come with RGB LEDs preinstalled. Others must have them installed after the fact. See the [Hardware Modification](#hardware-modification) section for information on adding RGB lighting to your keyboard.
 
-Currently QMK supports the following addressable LEDs (however, the white LED in RGBW variants is not supported):
+Currently QMK supports the following addressable LEDs:
 
  * WS2811, WS2812, WS2812B, WS2812C, etc.
  * SK6812, SK6812MINI, SK6805
@@ -356,27 +356,12 @@ Usually lighting layers apply their configured brightness once activated. If you
 
 If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight/rgblight.h) for the full list, but the most commonly used functions include:
 
-### Utility Functions
-|Function                                    |Description                                                        |
-|--------------------------------------------|-------------------------------------------------------------------|
-|`sethsv(hue, sat, val, ledbuf)`             |Set ledbuf to the given HSV value                                  |
-|`sethsv_raw(hue, sat, val, ledbuf)`         |Set ledbuf to the given HSV value without RGBLIGHT_LIMIT_VAL check |
-|`setrgb(r, g, b, ledbuf)`                   |Set ledbuf to the given RGB value where `r`/`g`/`b`                |
-
 ### Low level Functions
 |Function                                    |Description                                |
 |--------------------------------------------|-------------------------------------------|
 |`rgblight_set()`                            |Flush out led buffers to LEDs              |
 |`rgblight_set_clipping_range(pos, num)`     |Set clipping Range. see [Clipping Range](#clipping-range) |
 
-Example:
-```c
-sethsv(HSV_WHITE, (rgb_led_t *)&led[0]); // led 0
-sethsv(HSV_RED,   (rgb_led_t *)&led[1]); // led 1
-sethsv(HSV_GREEN, (rgb_led_t *)&led[2]); // led 2
-rgblight_set(); // Utility functions do not call rgblight_set() automatically, so they need to be called explicitly.
-```
-
 ### Effects and Animations Functions
 #### effect range setting
 |Function                                    |Description       |

docs/feature_sequencer.md

@@ -44,7 +44,7 @@ While the tempo defines the absolute speed at which the sequencer goes through t
 |-------------------------------|---------|---------------------------------------------------|
 |`QK_SEQUENCER_ON`              |`SQ_ON`  |Start the step sequencer                           |
 |`QK_SEQUENCER_OFF`             |`SQ_OFF` |Stop the step sequencer                            |
-|`QK_SEQUENCER_TOGGLE`          |`SQ_TOG` |Toggle the step sequencer playback                 |
+|`QK_SEQUENCER_TOGGLE`          |`SQ_TOGG`|Toggle the step sequencer playback                 |
 |`QK_SEQUENCER_STEPS_ALL`       |`SQ_SALL`|Enable all the steps                               |
 |`QK_SEQUENCER_STEPS_CLEAR`     |`SQ_SCLR`|Disable all the steps                              |
 |`QK_SEQUENCER_TEMPO_DOWN`      |`SQ_TMPD`|Decrease the tempo                                 |

docs/feature_split_keyboard.md

@@ -266,7 +266,7 @@ This enables syncing of the Host LED status (caps lock, num lock, etc) between b
 #define SPLIT_MODS_ENABLE
 ```
 
-This enables transmitting modifier state (normal, weak and oneshot) to the non primary side of the split keyboard. The purpose of this feature is to support cosmetic use of modifer state (e.g. displaying status on an OLED screen).
+This enables transmitting modifier state (normal, weak, oneshot and oneshot locked) to the non primary side of the split keyboard. The purpose of this feature is to support cosmetic use of modifer state (e.g. displaying status on an OLED screen).
 
 ```c
 #define SPLIT_WPM_ENABLE

docs/feature_tri_layer.md

@@ -45,4 +45,4 @@ Eg, if you wanted to set the "Adjust" layer to be layer 5, you'd add this to you
 | `get_tri_layer_upper_layer()`                | Gets the current "upper" layer.                 |
 | `get_tri_layer_adjust_layer()`               | Gets the current "adjust" layer.                |
 
-!> Note: these settings are not persisent, and will be reset to the default on power loss or power cycling of the controller.
+!> Note: these settings are not persistent, and will be reset to the default on power loss or power cycling of the controller.

docs/flashing.md

@@ -236,7 +236,7 @@ Flashing sequence:
 
 ## STM32/APM32 DFU
 
-All STM32 and APM32 MCUs, except for F103 (see the [STM32duino section](#stm32duino)) come preloaded with a factory bootloader that cannot be modified nor deleted.
+All USB-capable STM32 and APM32 MCUs, except for a small handful (such as STM32F103 -- see the [STM32duino section](#stm32duino)) come preloaded with a factory bootloader that cannot be modified nor deleted.
 
 To ensure compatibility with the STM32-DFU bootloader, make sure this block is present in your `rules.mk` (optionally with `apm32-dfu` instead):
 
@@ -464,4 +464,4 @@ CLI Flashing sequence:
 3. Flash via QMK CLI eg. `qmk flash --keyboard handwired/onekey/rpi_pico --keymap default`
 4. Wait for the keyboard to become available
 
-<sup>1</sup>: This works only if QMK was compiled with `RP2040_BOOTLOADER_DOUBLE_TAP_RESET` defined.
+<sup>1</sup>: This works only if the controller has been flashed with QMK Firmware with `RP2040_BOOTLOADER_DOUBLE_TAP_RESET` defined.

docs/getting_started_introduction.md

@@ -4,7 +4,7 @@ This page attempts to explain the basic information you need to know to work wit
 
 ## Basic QMK Structure
 
-QMK is a fork of [Jun Wako](https://github.com/tmk)'s [tmk_keyboard](https://github.com/tmk/tmk_keyboard) project. The original TMK code, with modifications, can be found in the `tmk_core` folder. The QMK additions to the project may be found in the `quantum` folder. Keyboard projects may be found in the `handwired` and `keyboard` folders.
+QMK is a fork of [Jun Wako](https://github.com/tmk)'s [tmk_keyboard](https://github.com/tmk/tmk_keyboard) project. The original TMK code, with modifications, can be found in the `tmk_core` folder. The QMK additions to the project may be found in the `quantum` folder. Keyboard projects may be found in the `keyboards` folder.
 
 ### Userspace Structure
 

docs/hand_wire.md

@@ -175,7 +175,7 @@ As you move along, be sure that the controller is staying in place - recutting a
 
 From here, you should have a working keyboard once you program a firmware.
 
-Simple firmware can be created easily using the [Keyboard Firmware Builder](https://kbfirmware.com/) website.  Recreate your layout using [Keyboard Layout Editor](https://www.keyboard-layout-editor.com), import it and recreate the matrix (if not already done as part of [planning the matrix](#planning-the-matrix).
+Simple firmware can be created easily using the [Keyboard Firmware Builder](https://kbfirmware.com/) website.  Recreate your layout using [Keyboard Layout Editor](https://www.keyboard-layout-editor.com), import it and recreate the matrix (if not already done as part of [planning the matrix](#planning-the-matrix)).
 
 Go through the rest of the tabs, assigning keys until you get to the last one where you can compile and download your firmware.  The .hex file can be flashed straight onto your keyboard, or for advanced functionality, compiled locally after [Setting up Your Environment](newbs_getting_started.md).
 

docs/ja/config_options.md

@@ -378,7 +378,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
   * 標準マトリックス走査ルーチンを独自のものに置き換えることができます。
 * `DEBOUNCE_TYPE`
   * 標準キーデバウンスルーチンを代替または独自のものに置き換えることができます。
-* `WAIT_FOR_USB`
+* `USB_WAIT_FOR_ENUMERATION`
   * キーボードが起動する前に、USB 接続が確立されるのをキーボードに待機させます
 * `NO_USB_STARTUP_CHECK`
   * キーボードの起動後の usb サスペンドチェックを無効にします。通常、キーボードはタスクが実行される前にホストがウェイク アップするのを待ちます。分割キーボードは半分はウェイクアップコールを取得できませんが、マスタにコマンドを送信する必要があるため、役に立ちます。

docs/keycodes.md

@@ -398,6 +398,22 @@ See also: [Leader Key](feature_leader_key.md)
 |---------|------------------------|
 |`QK_LEAD`|Begins a leader sequence|
 
+## LED Matrix :id=led-matrix
+
+See also: [LED Matrix](feature_led_matrix.md)
+
+|Key                            |Aliases  |Description                        |
+|-------------------------------|---------|-----------------------------------|
+|`QK_LED_MATRIX_ON`             |`LM_ON`  |Turn on LED Matrix                 |
+|`QK_LED_MATRIX_OFF`            |`LM_OFF` |Turn off LED Matrix                |
+|`QK_LED_MATRIX_TOGGLE`         |`LM_TOGG`|Toggle LED Matrix on or off        |
+|`QK_LED_MATRIX_MODE_NEXT`      |`LM_NEXT`|Cycle through animations           |
+|`QK_LED_MATRIX_MODE_PREVIOUS`  |`LM_PREV`|Cycle through animations in reverse|
+|`QK_LED_MATRIX_BRIGHTNESS_UP`  |`LM_BRIU`|Increase the brightness level      |
+|`QK_LED_MATRIX_BRIGHTNESS_DOWN`|`LM_BRID`|Decrease the brightness level      |
+|`QK_LED_MATRIX_SPEED_UP`       |`LM_SPDU`|Increase the animation speed       |
+|`QK_LED_MATRIX_SPEED_DOWN`     |`LM_SPDD`|Decrease the animation speed       |
+
 ## Magic Keycodes :id=magic-keycodes
 
 See also: [Magic Keycodes](keycodes_magic.md)

docs/newbs.md

@@ -7,7 +7,7 @@ QMK tries to put a lot of power into your hands by making easy things easy, and
 Not sure if your keyboard can run QMK? If it's a mechanical keyboard you built yourself chances are good it can. We support a [large number of hobbyist boards](https://qmk.fm/keyboards/). If your current keyboard can't run QMK there are a lot of choices out there for boards that do.
 
 ?> **Is This Guide For Me?**<br>
-If the thought of programming intimidates you, please [take a look at our online GUI](newbs_building_firmware_configurator.md) instead.</div>
+If the thought of programming intimidates you, please [take a look at our online GUI](newbs_building_firmware_configurator.md) instead.
 
 ## Overview
 

docs/pr_checklist.md

@@ -9,6 +9,7 @@ If there are any inconsistencies with these recommendations, you're best off [cr
 - PR should be submitted using a non-`master` branch on the source repository
     - this does not mean you target a different branch for your PR, rather that you're not working out of your own master branch
     - if submitter _does_ use their own `master` branch, they'll be given a link to the ["how to git"](newbs_git_using_your_master_branch.md) page after merging -- (end of this document will contain the contents of the message)
+    - Note, frequently merging upstream with your branch is not needed and is discouraged. Valid reason for updating your branch may be resolving merge conflicts and pulling in new changes relevant to your PR.
 - PRs should contain the smallest amount of modifications required for a single change to the codebase
     - multiple keyboards at the same time is not acceptable
     - **the smaller the PR, the higher likelihood of a quicker review, higher likelihood of quicker merge, and less chance of conflicts**
@@ -43,10 +44,10 @@ If there are any inconsistencies with these recommendations, you're best off [cr
 
 - PRs for vendor specific keymaps will be permitted. The naming convention for these should be `default_${vendor}`, `via_${vendor}` i.e. `via_clueboard`.
     - vendor specific keymaps do not necessarily need to be "vanilla" and can be more richly featured than `default` or `via` stock keymaps.
-- #include QMK_KEYBOARD_H preferred to including specific board files
+- `#include QMK_KEYBOARD_H` preferred to including specific board files
 - prefer layer enums to #defines
-- custom keycode enums must have first entry = SAFE_RANGE
-- some care with spacing (e.g., alignment on commas or first char of keycodes) makes for a much nicer-looking keymap
+- custom keycode enums must have first entry = `QK_USER`
+- some care with spacing (e.g., alignment on commas or first char of keycodes) makes for a much nicer-looking keymap. Spaces are preferred to tabs
 
 ## Keyboard PRs
 
@@ -81,6 +82,8 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
       - Encoder Configuration
       - Bootmagic Configuration
       - LED Indicator Configuration
+      - RGB Light Configuration
+      - RGB Matrix Configuration
     - Run `qmk format-json` on this file before submitting your PR. Be sure to append the `-i` flag to directly modify the file, or paste the outputted code into the file. 
 - `readme.md`
     - must follow the [template](https://github.com/qmk/qmk_firmware/blob/master/data/templates/keyboard/readme.md)
@@ -90,8 +93,7 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
     - a picture about the keyboard and preferably about the PCB, too
         - images are not to be placed in the `qmk_firmware` repository
         - images should be uploaded to an external image hosting service, such as [imgur](https://imgur.com/).
-        - if imgur is used, images should be resized appropriately: append "h" to the image url i.e. [https://i.imgur.com/vqgE7Ok.jpg](https://i.imgur.com/vqgE7Ok.jpg) becomes [https://i.imgur.com/vqgE7Ok**h**.jpg](https://i.imgur.com/vqgE7Okh.jpg)
-        - image links should link directly to the image, not a "preview" -- i.e. [https://imgur.com/vqgE7Ok](https://imgur.com/vqgE7Ok) should be [https://i.imgur.com/vqgE7Okh.jpg](https://i.imgur.com/vqgE7Okh.jpg) when using imgur
+        - image links should link directly to the image, not a "preview" -- i.e. [https://imgur.com/vqgE7Ok](https://imgur.com/vqgE7Ok) should be [https://i.imgur.com/vqgE7Ok.jpg](https://i.imgur.com/vqgE7Ok.jpg) when using imgur
 - `rules.mk`
     - removed `MIDI_ENABLE`, `FAUXCLICKY_ENABLE` and `HD44780_ENABLE`
     - modified `# Enable Bluetooth with the Adafruit EZ-Key HID` -> `# Enable Bluetooth`
@@ -146,6 +148,13 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
   - For instance, only `wilba_tech` boards shall include `keyboards/wilba_tech/wt_main.c` and  `keyboards/wilba_tech/wt_rgb_backlight.c`. But including `drivers/sensors/pmw3360.c` is absolutely fine for any and all boards that require it.
   - Code that needs to be used by multiple boards is a candidate for core code changes, and should be separated out.
 
+Wireless-capable boards:
+- Given license abuse from vendors, QMK does not accept any vendor PRs for wireless- or Bluetooth-capable keyboards without wireless and/or Bluetooth code
+    - Historically, vendors have done this in bad faith in order to attain downstream VIA compatibility with no intention of releasing wireless sources
+    - QMK's license, the GPL2+, requires full source disclosure for any distributed binary -- including full sources for any keyboard shipped by vendors containing QMK and/or firmware-side VIA code
+    - If a vendor's wireless-capable keyboard PR submission is lacking wireless capability, then the PR will be left on-hold and unmergeable until wireless bindings are provided
+    - If a vendor's wireless-capable keyboard is merged into QMK before it's known that the board is wireless, then all existing and future PRs from the same vendor will be put on hold until wireless bindings for the offending keyboard are provided
+
 Also, specific to ChibiOS:
 - **strong** preference to using existing ChibiOS board definitions.
     - a lot of the time, an equivalent Nucleo board can be used with a different flash size or slightly different model in the same family
@@ -204,7 +213,7 @@ Additionally, PR reviews are something that is done in our free time. We are not
 ## Example GPLv2 Header
 
 ```
-/* Copyright 2021 Your Name (@yourgithub)
+/* Copyright 2024 Your Name (@yourgithub)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -224,6 +233,6 @@ Additionally, PR reviews are something that is done in our free time. We are not
 Or, optionally, using [SPDX identifier](https://spdx.org/licenses/) instead:
 
 ```
-// Copyright 2021 Your Name (@yourgithub)
+// Copyright 2024 Your Name (@yourgithub)
 // SPDX-License-Identifier: GPL-2.0-or-later
 ```

docs/reference_info_json.md

@@ -118,15 +118,24 @@ Configures the [Audio](feature_audio.md) feature.
         * `clicky`
             * The default audio clicky enabled state.
             * Default: `true`
+    * `driver`
+        * The driver to use. Must be one of `dac_additive`, `dac_basic`, `pwm_software`, `pwm_hardware`.
     * `macro_beep`
         * Play a short beep for `\a` (ASCII `BEL`) characters in Send String macros.
         * Default: `false`
     * `pins` (Required)
         * The GPIO pin(s) connected to the speaker(s).
+    * `power_control`
+        * `on_state`
+            * The logical GPIO state required to turn the speaker on.
+            * Default: `1` (on = high)
+        * `pin`
+            * The GPIO pin connected to speaker power circuit.
     * `voices`
         * Use multiple audio voices.
         * Default: `false`
 
+
 ## Backlight :id=backlight
 
 Configures the [Backlight](feature_backlight.md) feature.
@@ -579,9 +588,6 @@ Configures the [RGB Lighting](feature_rgblight.md) feature.
     * `max_brightness`
         * The maximum value which the HSV "V" component is scaled to, from 0 to 255.
         * Default: `255`
-    * `rgbw`
-        * Enable RGBW LEDs.
-        * Default: `false`
     * `saturation_steps`
         * The number of saturation adjustment steps.
         * Default: `17`
@@ -633,7 +639,7 @@ Configures the [RGB Matrix](feature_rgb_matrix.md) feature.
             * The default animation speed.
             * Default: `128`
     * `driver` (Required)
-        * The driver to use. Must be one of `aw20216s`, `custom`, `is31fl3218`, `is31fl3729`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `snled27351`, `ws2812`.
+        * The driver to use. Must be one of `aw20216s`, `custom`, `is31fl3218`, `is31fl3236`, `is31fl3729`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `snled27351`, `ws2812`.
     * `hue_steps`
         * The number of hue adjustment steps.
         * Default: `8`
@@ -733,7 +739,7 @@ Configures the [Split Keyboard](feature_split_keyboard.md) feature.
         * Default: `1`
     * `transport`
         * `protocol`
-            * The split transport protocol to use. Must be one of `custom`, `i2c`, `serial`, `serial_usart`.
+            * The split transport protocol to use. Must be one of `custom`, `i2c`, `serial`.
         * `sync`
             * `activity`
                 * Mirror the activity timestamps to the secondary half.
@@ -826,7 +832,7 @@ Configures the [Stenography](feature_stenography.md) feature.
     * `suspend_wakeup_delay`
         * The amount of time to wait after sending a wakeup packet, in milliseconds.
         * Default: `0` (disabled)
-    * `wait_for`
+    * `wait_for_enumeration`
         * Force the keyboard to wait for USB enumeration before starting up.
         * Default: `false`
 
@@ -846,3 +852,6 @@ Configures the [WS2812](ws2812_driver.md) driver.
     * `i2c_timeout`
         * The I²C timeout in milliseconds (`i2c` driver only).
         * Default: `100` (100 ms)
+    * `rgbw`
+        * Enable RGBW LEDs.
+        * Default: `false`

docs/reference_keymap_extras.md

@@ -23,6 +23,8 @@ These headers are located in [`quantum/keymap_extras/`](https://github.com/qmk/q
 |Canadian Multilingual (CSA)      |`keymap_canadian_multilingual.h` |`sendstring_canadian_multilingual.h`|
 |Croatian                         |`keymap_croatian.h`              |`sendstring_croatian.h`             |
 |Czech                            |`keymap_czech.h`                 |`sendstring_czech.h`                |
+|Czech (macOS, ANSI)              |`keymap_czech_mac_ansi.h`        |`sendstring_czech_mac_ansi.h`       |
+|Czech (macOS, ISO)               |`keymap_czech_mac_iso.h`         |`sendstring_czech_mac_iso.h`        |
 |Danish                           |`keymap_danish.h`                |`sendstring_danish.h`               |
 |Dutch (Belgium)                  |`keymap_belgian.h`               |`sendstring_belgian.h`              |
 |English (Ireland)                |`keymap_irish.h`                 |                                    |

docs/serial_driver.md

@@ -1,6 +1,6 @@
 # 'serial' Driver
 
-The serial driver powers the [Split Keyboard](feature_split_keyboard.md) feature. Several implementations are available, depending on the platform of your split keyboard. Note that none of the drivers support split keyboards with more than two halves.
+The Serial driver powers the [Split Keyboard](feature_split_keyboard.md) feature. Several implementations are available that cater to the platform and capabilites of MCU in use. Note that none of the drivers support split keyboards with more than two halves.
 
 | Driver                                  | AVR                | ARM                | Connection between halves                                                                     |
 | --------------------------------------- | ------------------ | ------------------ | --------------------------------------------------------------------------------------------- |
@@ -14,7 +14,7 @@ The serial driver powers the [Split Keyboard](feature_split_keyboard.md) feature
 
 ## Bitbang
 
-This is the Default driver, the absence of configuration assumes this driver. It works by [bit banging](https://en.wikipedia.org/wiki/Bit_banging) a GPIO pin using the CPU. It is therefore not as efficient as a dedicated hardware peripheral, which the Half-duplex and Full-duplex drivers use.
+This is the Default driver, absence of configuration assumes this driver. It works by [bit banging](https://en.wikipedia.org/wiki/Bit_banging) a GPIO pin using the CPU. It is therefore not as efficient as a dedicated hardware peripheral, which the Half-duplex and Full-duplex drivers use.
 
 !> On ARM platforms the bitbang driver causes connection issues when using it together with the bitbang WS2812 driver. Choosing alternate drivers for both serial and WS2812 (instead of bitbang) is strongly recommended.
 
@@ -31,7 +31,7 @@ This is the Default driver, the absence of configuration assumes this driver. It
 +-------+                 +-------+
 ```
 
-One GPIO pin is needed for the bitbang driver, as only one wire is used for receiving and transmitting data. This pin is referred to as the `SOFT_SERIAL_PIN` (SSP) in the configuration. A simple TRS or USB cable provides enough conductors for this driver to work. 
+One GPIO pin is needed for the bitbang driver, as only one wire is used for receiving and transmitting data. This pin is referred to as the `SOFT_SERIAL_PIN` (SSP) in the configuration. A TRS or USB cable provides enough conductors for this driver to function. 
 
 ### Setup
 
@@ -57,7 +57,7 @@ SERIAL_DRIVER = bitbang
 
 ## USART Half-duplex
 
-Targeting ARM boards based on ChibiOS, where communication is offloaded to a USART hardware device that supports Half-duplex operation. The advantages over bitbanging are fast, accurate timings and reduced CPU usage. Therefore it is advised to choose this driver or the Full-duplex driver whenever possible.
+Targeting ARM boards based on ChibiOS, where communication is offloaded to a USART hardware device that supports Half-duplex operation. The advantages over bitbanging are fast, accurate timings and reduced CPU usage. Therefore it is advised to choose Half-duplex over Bitbang if MCU is capable of utilising Half-duplex, and Full-duplex can't be used instead (e.g. lack of available GPIO pins, or imcompatible PCB design).
 
 ### Pin configuration
 
@@ -74,11 +74,13 @@ Targeting ARM boards based on ChibiOS, where communication is offloaded to a USA
 +-------+                 +-------+
 ```
 
-Only one GPIO pin is needed for the Half-duplex driver, as only one wire is used for receiving and transmitting data. This pin is referred to as the `SERIAL_USART_TX_PIN` in the configuration. Take care that the pin you chose can act as the TX pin of the USART peripheral. A simple TRS or USB cable provides enough conductors for this driver to work. As the split connection is configured to work in open-drain mode, an **external pull-up resistor is needed to keep the line high**. Resistor values of 1.5kΩ to 8.2kΩ are known to work.
+Only one GPIO pin is needed for the Half-duplex driver, as only one wire is used for receiving and transmitting data. This pin is referred to as the `SERIAL_USART_TX_PIN` in the configuration. Ensure that the pin chosen for split communication can operate as the TX pin of the contoller's USART peripheral. A TRS or USB cable provides enough conductors for this driver to function. As the split connection is configured to operate in open-drain mode, an **external pull-up resistor is needed to keep the line high**. Resistor values of 1.5kΩ to 8.2kΩ are known to work. 
+
+!> ***Note:*** A pull-up resistor isn't required for RP2040 controllers configured with PIO subsystem.
 
 ### Setup
 
-To use the Half-duplex driver follow these steps to activate it. If you target the Raspberry Pi RP2040 PIO implementation skip step 1.
+To use the Half-duplex driver follow these steps to activate it. If you target the Raspberry Pi RP2040 PIO implementation, start at step 2.
 
 1. Change the `SERIAL_DRIVER` to `usart` in your keyboards `rules.mk` file:
 
@@ -86,7 +88,9 @@ To use the Half-duplex driver follow these steps to activate it. If you target t
 SERIAL_DRIVER = usart
 ```
 
-2. (RP2040 PIO only!) Change the `SERIAL_DRIVER` to `vendor` in your keyboards `rules.mk` file:
+Skip to step 3.
+
+2. (RP2040 + PIO only!) Change the `SERIAL_DRIVER` to `vendor` in your keyboards `rules.mk` file:
 
 ```make
 SERIAL_DRIVER = vendor
@@ -105,13 +109,13 @@ For STM32 MCUs several GPIO configuration options can be changed as well. See th
 #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 ```
 
-4. Decide either for `SERIAL`, `SIO` or `PIO` subsystem, see the section ["Choosing a driver subsystem"](#choosing-a-driver-subsystem).
+4. Decide either for `SERIAL`, `SIO`, or `PIO` subsystem. See section ["Choosing a driver subsystem"](#choosing-a-driver-subsystem).
 
 <hr>
 
 ## USART Full-duplex
 
-Targeting ARM boards based on ChibiOS where communication is offloaded to an USART hardware device. The advantages over bitbanging are fast, accurate timings and reduced CPU usage. Therefore it is advised to choose this driver or the Full-duplex driver whenever possible. Due to its internal design it is slightly more efficient then the Half-duplex driver, but it should be primarily chosen if Half-duplex operation is not supported by the USART peripheral.
+Targeting ARM boards based on ChibiOS where communication is offloaded to an USART hardware device. The advantages over bitbanging are fast, accurate timings and reduced CPU usage; therefore it is advised to choose this driver over all others where possible. Due to its internal design Full-duplex is slightly more efficient than the Half-duplex driver, but Full-duplex should be primarily chosen if Half-duplex operation is not supported by the controller's USART peripheral.
 
 ### Pin configuration
 
@@ -129,13 +133,13 @@ Targeting ARM boards based on ChibiOS where communication is offloaded to an USA
 +-------+                 +-------+
 ```
 
-Two GPIO pins are needed for the Full-duplex driver, as two distinct wires are used for receiving and transmitting data. The pin transmitting data is the `TX` pin and refereed to as the `SERIAL_USART_TX_PIN`, the pin receiving data is the `RX` pin and refereed to as the `SERIAL_USART_RX_PIN` in this configuration. Please note that `TX` pin of the master half has to be connected with the `RX` pin of the slave half and the `RX` pin of the master half has to be connected with the `TX` pin of the slave half! Usually this pin swap has to be done outside of the MCU e.g. with cables or on the PCB. Some MCUs like the STM32F303 used on the Proton-C allow this pin swap directly inside the MCU. A simple TRRS or USB cable provides enough conductors for this driver to work.
+Two GPIO pins are needed for the Full-duplex driver, as two distinct wires are used for receiving and transmitting data. The pin transmitting data is the `TX` pin and refereed to as the `SERIAL_USART_TX_PIN`, the pin receiving data is the `RX` pin and refereed to as the `SERIAL_USART_RX_PIN` in this configuration. Please note that `TX` pin of the master half has to be connected with the `RX` pin of the slave half and the `RX` pin of the master half has to be connected with the `TX` pin of the slave half! Usually this pin swap has to be done outside of the MCU e.g. with cables or on the PCB. Some MCUs like the STM32F303 used on the Proton-C allow this pin swap directly inside the MCU. A TRRS or USB cable provides enough conductors for this driver to function.
 
-To use this driver the usart peripherals `TX` and `RX` pins must be configured with the correct Alternate-functions. If you are using a Proton-C everything is already setup, same is true for STM32F103 MCUs. For MCUs which are using a modern flexible GPIO configuration you have to specify these by setting `SERIAL_USART_TX_PAL_MODE` and `SERIAL_USART_RX_PAL_MODE`. Refer to the corresponding datasheets of your MCU or find those settings in the section ["Alternate Functions for selected STM32 MCUs"](#alternate-functions-for-selected-stm32-mcus).
+To use this driver the USART peripherals `TX` and `RX` pins must be configured with the correct Alternate-functions. If you are using a Proton-C development board everything is already setup, same is true for STM32F103 MCUs. For MCUs which are using a modern flexible GPIO configuration you have to specify these by setting `SERIAL_USART_TX_PAL_MODE` and `SERIAL_USART_RX_PAL_MODE`. Refer to the corresponding datasheets of your MCU or find those settings in the section ["Alternate Functions for selected STM32 MCUs"](#alternate-functions-for-selected-stm32-mcus).
 
 ### Setup
 
-To use the Full-duplex driver follow these steps to activate it. If you target the Raspberry Pi RP2040 PIO implementation skip step 1.
+To use the Full-duplex driver follow these steps to activate it. If you target the Raspberry Pi RP2040 PIO implementation, start at step 2
 
 1. Change the `SERIAL_DRIVER` to `usart` in your keyboards `rules.mk` file:
 
@@ -143,7 +147,9 @@ To use the Full-duplex driver follow these steps to activate it. If you target t
 SERIAL_DRIVER = usart
 ```
 
-2. (RP2040 PIO only!) Change the `SERIAL_DRIVER` to `vendor` in your keyboards `rules.mk` file:
+Skip to step 3
+
+2. (RP2040 + PIO only!) Change the `SERIAL_DRIVER` to `vendor` in your keyboards `rules.mk` file:
 
 ```make
 SERIAL_DRIVER = vendor
@@ -165,7 +171,7 @@ For STM32 MCUs several GPIO configuration options, including the ability for `TX
 #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 ```
 
-1. Decide either for `SERIAL`, `SIO` or `PIO` subsystem, see the section ["Choosing a driver subsystem"](#choosing-a-driver-subsystem).
+4. Decide either for `SERIAL`, `SIO`, or `PIO` subsystem. See section ["Choosing a driver subsystem"](#choosing-a-driver-subsystem).
 
 <hr>
 
@@ -225,7 +231,7 @@ Just below `#include_next <mcuconf.h>` add:
 
 Where 'n' matches the peripheral number of your selected USART on the MCU.
 
-3. In you keyboards `config.h`: override the default USART `SIO` driver if you use a USART peripheral that does not belong to the default selected `SIOD1` driver. For instance, if you selected `STM32_SERIAL_USE_USART3` the matching driver would be `SIOD3`.
+3. In the keyboard's `config.h` file: override the default USART `SIO` driver if you use a USART peripheral that does not belong to the default selected `SIOD1` driver. For instance, if you selected `STM32_SERIAL_USE_USART3` the matching driver would be `SIOD3`.
 
 ```c
  #define SERIAL_USART_DRIVER SIOD3
@@ -233,9 +239,9 @@ Where 'n' matches the peripheral number of your selected USART on the MCU.
  
 ### The `PIO` driver
 
-The `PIO` subsystem is a Raspberry Pi RP2040 specific implementation, using the integrated PIO peripheral and is therefore only available on this MCU. Because of the flexible nature of the PIO peripherals, **any** GPIO pin can be used as a `TX` or `RX` pin. Half-duplex and Full-duplex operation is fully supported. The Half-duplex operation mode uses the built-in pull-ups and GPIO manipulation on the RP2040 to drive the line high by default. An external pull-up is therefore not necessary.
+The `PIO` subsystem is a Raspberry Pi RP2040 specific implementation, using an integrated PIO peripheral and is therefore only available on this MCU. Because of the flexible nature of PIO peripherals, **any** GPIO pin can be used as a `TX` or `RX` pin. Half-duplex and Full-duplex operation modes are fully supported with this driver. Half-duplex uses the built-in pull-ups and GPIO manipulation of the RP2040 to drive the line high by default, thus an external pull-up resistor **is not required**.
 
-You may optionally switch the PIO peripheral used with the following define in config.h:
+Optionally, the PIO peripheral utilized for split communication can be changed with the following define in config.h:
 ```c
 #define SERIAL_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the Serial implementation uses the PIO0 peripheral
 ```

docs/squeezing_avr.md

@@ -2,7 +2,7 @@
 
 AVR is severely resource-constrained, and as QMK continues to grow, it is approaching a point where support for AVR may need to be moved to legacy status as newer development is unable to fit into those constraints.
 
-However, if you need to reduce the compiled size of your firmware, there are a number of options to do so.
+However, if you need to reduce the compiled size of your firmware to fit the controller's limited flash size, there are a number of options to do so.
 
 ## `rules.mk` Settings
 First and foremost is enabling link time optimization. To do so, add this to your rules.mk: 
@@ -91,15 +91,19 @@ Or if you're not using layers at all, you can outright remove the functionality
 
 There are two `__attribute__ ((weak))` placeholder functions available to customize magic keycodes. If you are not using that feature to swap keycodes, such as backslash with backspace, add the following to your `keymap.c` or user space code:
 ```c
+#ifndef MAGIC_ENABLE
 uint16_t keycode_config(uint16_t keycode) {
     return keycode;
 }
+#endif
 ```
 Likewise, if you are not using magic keycodes to swap modifiers, such as Control with GUI, add the following to your `keymap.c` or user space code:
 ```c
+#ifndef MAGIC_ENABLE
 uint8_t mod_config(uint8_t mod) {
     return mod;
 }
+#endif
 ```
 Both of them will overwrite the placeholder functions with a simple return statement to reduce firmware size.
 
@@ -197,11 +201,7 @@ For RGB Matrix, these need to be explicitly enabled as well. To disable any that
 
 # Final Thoughts
 
-If you've done all of this, and your firmware is still too large, then it's time. It's time to consider making the switch to ARM. Unfortunately, right now is the worst possible time for that, due to the silicon shortage, and supply chain issues. Getting an ARM chip is difficult, at best, and significantly overpriced, at worst.
- -- Drashna
-
-That said, there are a number of Pro Micro replacements with ARM controllers: 
-* [Proton C](https://qmk.fm/proton-c/) (out of stock)
+If you've done all of this, and your firmware is still too large, then it is time to consider making the switch to ARM. There are a number of Pro Micro replacements with an ARM controller:
 * [Bonsai C](https://github.com/customMK/Bonsai-C) (Open Source, DIY/PCBA)
 * [STeMCell](https://github.com/megamind4089/STeMCell) (Open Source, DIY/PCBA)
 * [Adafruit KB2040](https://learn.adafruit.com/adafruit-kb2040)
@@ -212,6 +212,7 @@ That said, there are a number of Pro Micro replacements with ARM controllers:
 * [Liatris](https://splitkb.com/products/liatris)
 * [Imera](https://splitkb.com/products/imera)
 * [Michi](https://github.com/ci-bus/michi-promicro-rp2040)
+* [Proton C](https://qmk.fm/proton-c/) (out of stock)
 
 There are other, non-Pro Micro compatible boards out there. The most popular being:
 * [WeAct Blackpill F411](https://www.aliexpress.com/item/1005001456186625.html) (~$6 USD)

docs/ws2812_driver.md

@@ -33,6 +33,7 @@ Add the following to your `config.h`:
 |`WS2812_T0H`       |`350`                  |The length of a "0" bit's high phase in nanoseconds                                             |
 |`WS2812_TRST_US`   |`280`                  |The length of the reset phase in microseconds                                                   |
 |`WS2812_BYTE_ORDER`|`WS2812_BYTE_ORDER_GRB`|The byte order of the RGB data                                                                  |
+|`WS2812_RGBW`      |*Not defined*          |Enables RGBW support (except `i2c` driver)                                                      |
 
 ### Timing Adjustment :id=timing-adjustment
 
@@ -58,6 +59,27 @@ Where the byte order may be one of:
 |`RGB`     |WS2812B-2020                |
 |`BGR`     |TM1812                      |
 
+### RGBW Support :id=rgbw-support
+
+Rendering the color white with RGB LEDs is typically inconsistent due to inherent variations between each individual LED die. However, some WS2812 variants (such as SK6812RGBW) also possess a white LED along with the red, green, and blue channels, which allows for a more accurate white to be displayed.
+
+QMK can automatically convert the RGB data to be sent to the LEDs to mix in the white channel:
+
+```
+w = min(r, g, b)
+r -= w
+g -= w
+b -= w
+```
+
+Thus, an RGB triplet of `255,255,255` will simply turn on the white LED fully (`0,0,0,255`).
+
+To enable RGBW conversion, add the following to your `config.h`:
+
+```c
+#define WS2812_RGBW
+```
+
 ## Driver Configuration :id=driver-configuration
 
 Driver selection can be configured in `rules.mk` as `WS2812_DRIVER`, or in `info.json` as `ws2812.driver`. Valid values are `bitbang` (default), `i2c`, `spi`, `pwm`, `vendor`, or `custom`. See below for information on individual drivers.
@@ -208,9 +230,9 @@ The following `#define`s apply only to the `pwm` driver:
 |`WS2812_PWM_DRIVER`              |`PWMD2`             |The PWM driver to use                                                                     |
 |`WS2812_PWM_CHANNEL`             |`2`                 |The PWM channel to use                                                                    |
 |`WS2812_PWM_PAL_MODE`            |`2`                 |The pin alternative function to use                                                       |
-|`WS2812_DMA_STREAM`              |`STM32_DMA1_STREAM2`|The DMA Stream for `TIMx_UP`                                                              |
-|`WS2812_DMA_CHANNEL`             |`2`                 |The DMA Channel for `TIMx_UP`                                                             |
-|`WS2812_DMAMUX_ID`               |*Not defined*       |The DMAMUX configuration for `TIMx_UP` - only required if your MCU has a DMAMUX peripheral|
+|`WS2812_PWM_DMA_STREAM`          |`STM32_DMA1_STREAM2`|The DMA Stream for `TIMx_UP`                                                              |
+|`WS2812_PWM_DMA_CHANNEL`         |`2`                 |The DMA Channel for `TIMx_UP`                                                             |
+|`WS2812_PWM_DMAMUX_ID`           |*Not defined*       |The DMAMUX configuration for `TIMx_UP` - only required if your MCU has a DMAMUX peripheral|
 |`WS2812_PWM_COMPLEMENTARY_OUTPUT`|*Not defined*       |Whether the PWM output is complementary (`TIMx_CHyN`)                                     |
 
 ?> Using a complementary timer output (`TIMx_CHyN`) is possible only for advanced-control timers (1, 8 and 20 on STM32), and the `STM32_PWM_USE_ADVANCED` option in `mcuconf.h` must be set to `TRUE`. Complementary outputs of general-purpose timers are not supported due to ChibiOS limitations.

drivers/gpio/mcp23018.c

@@ -74,20 +74,20 @@ bool mcp23018_set_output_all(uint8_t slave_addr, uint8_t confA, uint8_t confB) {
     return true;
 }
 
-bool mcp23018_readPins(uint8_t slave_addr, mcp23018_port_t port, uint8_t* out) {
+bool mcp23018_read_pins(uint8_t slave_addr, mcp23018_port_t port, uint8_t* out) {
     uint8_t addr = SLAVE_TO_ADDR(slave_addr);
     uint8_t cmd  = port ? CMD_GPIOB : CMD_GPIOA;
 
     i2c_status_t ret = i2c_read_register(addr, cmd, out, sizeof(uint8_t), TIMEOUT);
     if (ret != I2C_STATUS_SUCCESS) {
-        dprintf("mcp23018_readPins::FAILED::%u\n", ret);
+        dprintf("mcp23018_read_pins::FAILED::%u\n", ret);
         return false;
     }
 
     return true;
 }
 
-bool mcp23018_readPins_all(uint8_t slave_addr, uint16_t* out) {
+bool mcp23018_read_pins_all(uint8_t slave_addr, uint16_t* out) {
     uint8_t addr = SLAVE_TO_ADDR(slave_addr);
 
     typedef union {
@@ -99,7 +99,7 @@ bool mcp23018_readPins_all(uint8_t slave_addr, uint16_t* out) {
 
     i2c_status_t ret = i2c_read_register(addr, CMD_GPIOA, &data.u8[0], sizeof(data), TIMEOUT);
     if (ret != I2C_STATUS_SUCCESS) {
-        dprintf("mcp23018_readPins::FAILED::%u\n", ret);
+        dprintf("mcp23018_read_pins_all::FAILED::%u\n", ret);
         return false;
     }
 

drivers/gpio/mcp23018.h

@@ -55,11 +55,16 @@ bool mcp23018_set_output_all(uint8_t slave_addr, uint8_t confA, uint8_t confB);
 /**
  * Read state of a given port
  */
-bool mcp23018_readPins(uint8_t slave_addr, mcp23018_port_t port, uint8_t* ret);
+bool mcp23018_read_pins(uint8_t slave_addr, mcp23018_port_t port, uint8_t* ret);
 
 /**
  * Read state of both ports sequentially
  *
  *  - slightly faster than multiple readPins
  */
-bool mcp23018_readPins_all(uint8_t slave_addr, uint16_t* ret);
+bool mcp23018_read_pins_all(uint8_t slave_addr, uint16_t* ret);
+
+// DEPRECATED - DO NOT USE
+
+#define mcp23018_readPins mcp23018_read_pins
+#define mcp23018_readPins_all mcp23018_read_pins_all

drivers/gpio/pca9505.c

@@ -133,7 +133,7 @@ bool pca9505_set_output(uint8_t slave_addr, pca9505_port_t port, uint8_t conf) {
     return true;
 }
 
-bool pca9505_readPins(uint8_t slave_addr, pca9505_port_t port, uint8_t* out) {
+bool pca9505_read_pins(uint8_t slave_addr, pca9505_port_t port, uint8_t* out) {
     uint8_t addr = SLAVE_TO_ADDR(slave_addr);
     uint8_t cmd  = 0;
     switch (port) {
@@ -156,7 +156,7 @@ bool pca9505_readPins(uint8_t slave_addr, pca9505_port_t port, uint8_t* out) {
 
     i2c_status_t ret = i2c_read_register(addr, cmd, out, sizeof(uint8_t), TIMEOUT);
     if (ret != I2C_STATUS_SUCCESS) {
-        print("pca9505_readPins::FAILED\n");
+        print("pca9505_read_pins::FAILED\n");
         return false;
     }
 

drivers/gpio/pca9505.h

@@ -64,4 +64,8 @@ bool pca9505_set_output(uint8_t slave_addr, pca9505_port_t port, uint8_t conf);
 /**
  * Read state of a given port
  */
-bool pca9505_readPins(uint8_t slave_addr, pca9505_port_t port, uint8_t* ret);
+bool pca9505_read_pins(uint8_t slave_addr, pca9505_port_t port, uint8_t* ret);
+
+// DEPRECATED - DO NOT USE
+
+#define pca9505_readPins pca9505_read_pins

drivers/gpio/pca9555.c

@@ -70,20 +70,20 @@ bool pca9555_set_output_all(uint8_t slave_addr, uint8_t confA, uint8_t confB) {
     return true;
 }
 
-bool pca9555_readPins(uint8_t slave_addr, pca9555_port_t port, uint8_t* out) {
+bool pca9555_read_pins(uint8_t slave_addr, pca9555_port_t port, uint8_t* out) {
     uint8_t addr = SLAVE_TO_ADDR(slave_addr);
     uint8_t cmd  = port ? CMD_INPUT_1 : CMD_INPUT_0;
 
     i2c_status_t ret = i2c_read_register(addr, cmd, out, sizeof(uint8_t), TIMEOUT);
     if (ret != I2C_STATUS_SUCCESS) {
-        print("pca9555_readPins::FAILED\n");
+        print("pca9555_read_pins::FAILED\n");
         return false;
     }
 
     return true;
 }
 
-bool pca9555_readPins_all(uint8_t slave_addr, uint16_t* out) {
+bool pca9555_read_pins_all(uint8_t slave_addr, uint16_t* out) {
     uint8_t addr = SLAVE_TO_ADDR(slave_addr);
 
     typedef union {
@@ -95,7 +95,7 @@ bool pca9555_readPins_all(uint8_t slave_addr, uint16_t* out) {
 
     i2c_status_t ret = i2c_read_register(addr, CMD_INPUT_0, &data.u8[0], sizeof(data), TIMEOUT);
     if (ret != I2C_STATUS_SUCCESS) {
-        print("pca9555_readPins_all::FAILED\n");
+        print("pca9555_read_pins_all::FAILED\n");
         return false;
     }
 

drivers/gpio/pca9555.h

@@ -78,11 +78,16 @@ bool pca9555_set_output_all(uint8_t slave_addr, uint8_t confA, uint8_t confB);
 /**
  * Read state of a given port
  */
-bool pca9555_readPins(uint8_t slave_addr, pca9555_port_t port, uint8_t* ret);
+bool pca9555_read_pins(uint8_t slave_addr, pca9555_port_t port, uint8_t* ret);
 
 /**
  * Read state of both ports sequentially
  *
  *  - slightly faster than multiple readPins
  */
-bool pca9555_readPins_all(uint8_t slave_addr, uint16_t* ret);
+bool pca9555_read_pins_all(uint8_t slave_addr, uint16_t* ret);
+
+// DEPRECATED - DO NOT USE
+
+#define pca9555_readPins pca9555_read_pins
+#define pca9555_readPins_all pca9555_read_pins_all

drivers/led/apa102.c

@@ -67,7 +67,9 @@ static void apa102_send_byte(uint8_t byte) {
 }
 
 static void apa102_start_frame(void) {
-    apa102_init();
+    gpio_write_pin_low(APA102_DI_PIN);
+    gpio_write_pin_low(APA102_CI_PIN);
+
     for (uint16_t i = 0; i < 4; i++) {
         apa102_send_byte(0);
     }
@@ -103,7 +105,8 @@ static void apa102_end_frame(uint16_t num_leds) {
         apa102_send_byte(0);
     }
 
-    apa102_init();
+    gpio_write_pin_low(APA102_DI_PIN);
+    gpio_write_pin_low(APA102_CI_PIN);
 }
 
 static void apa102_send_frame(uint8_t red, uint8_t green, uint8_t blue, uint8_t brightness) {
@@ -116,9 +119,6 @@ static void apa102_send_frame(uint8_t red, uint8_t green, uint8_t blue, uint8_t
 void apa102_init(void) {
     gpio_set_pin_output(APA102_DI_PIN);
     gpio_set_pin_output(APA102_CI_PIN);
-
-    gpio_write_pin_low(APA102_DI_PIN);
-    gpio_write_pin_low(APA102_CI_PIN);
 }
 
 void apa102_setleds(rgb_led_t *start_led, uint16_t num_leds) {

drivers/led/issi/is31fl3236-mono.c

@@ -0,0 +1,168 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "is31fl3236-mono.h"
+#include "i2c_master.h"
+#include "gpio.h"
+
+#define IS31FL3236_PWM_REGISTER_COUNT 36
+#define IS31FL3236_LED_CONTROL_REGISTER_COUNT 36
+
+#ifndef IS31FL3236_I2C_TIMEOUT
+#    define IS31FL3236_I2C_TIMEOUT 100
+#endif
+
+#ifndef IS31FL3236_I2C_PERSISTENCE
+#    define IS31FL3236_I2C_PERSISTENCE 0
+#endif
+
+#ifndef IS31FL3236_PWM_FREQUENCY
+#    define IS31FL3236_PWM_FREQUENCY IS31FL3236_PWM_FREQUENCY_3K_HZ // OFS - IS31FL3236A only
+#endif
+
+const uint8_t i2c_addresses[IS31FL3236_DRIVER_COUNT] = {
+    IS31FL3236_I2C_ADDRESS_1,
+#ifdef IS31FL3236_I2C_ADDRESS_2
+    IS31FL3236_I2C_ADDRESS_2,
+#    ifdef IS31FL3236_I2C_ADDRESS_3
+    IS31FL3236_I2C_ADDRESS_3,
+#        ifdef IS31FL3236_I2C_ADDRESS_4
+    IS31FL3236_I2C_ADDRESS_4,
+#        endif
+#    endif
+#endif
+};
+
+typedef struct is31fl3236_driver_t {
+    uint8_t pwm_buffer[IS31FL3236_PWM_REGISTER_COUNT];
+    bool    pwm_buffer_dirty;
+    uint8_t led_control_buffer[IS31FL3236_LED_CONTROL_REGISTER_COUNT];
+    bool    led_control_buffer_dirty;
+} PACKED is31fl3236_driver_t;
+
+is31fl3236_driver_t driver_buffers[IS31FL3236_DRIVER_COUNT] = {{
+    .pwm_buffer               = {0},
+    .pwm_buffer_dirty         = false,
+    .led_control_buffer       = {0},
+    .led_control_buffer_dirty = false,
+}};
+
+void is31fl3236_write_register(uint8_t index, uint8_t reg, uint8_t data) {
+#if IS31FL3236_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3236_I2C_PERSISTENCE; i++) {
+        if (i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3236_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
+    }
+#else
+    i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3236_I2C_TIMEOUT);
+#endif
+}
+
+void is31fl3236_write_pwm_buffer(uint8_t index) {
+#if IS31FL3236_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3236_I2C_PERSISTENCE; i++) {
+        if (i2c_write_register(i2c_addresses[index] << 1, IS31FL3236_REG_PWM, driver_buffers[index].pwm_buffer, 36, IS31FL3236_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
+    }
+#else
+    i2c_write_register(i2c_addresses[index] << 1, IS31FL3236_REG_PWM, driver_buffers[index].pwm_buffer, 36, IS31FL3236_I2C_TIMEOUT);
+#endif
+}
+
+void is31fl3236_init_drivers(void) {
+    i2c_init();
+
+#if defined(IS31FL3236_SDB_PIN)
+    gpio_set_pin_output(IS31FL3236_SDB_PIN);
+    gpio_write_pin_high(IS31FL3236_SDB_PIN);
+#endif
+
+    for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
+        is31fl3236_init(i);
+    }
+
+    for (uint8_t i = 0; i < IS31FL3236_LED_COUNT; i++) {
+        is31fl3236_set_led_control_register(i, true);
+    }
+
+    for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
+        is31fl3236_update_led_control_registers(i);
+    }
+}
+
+void is31fl3236_init(uint8_t index) {
+    // In case we ever want to reinitialize (?)
+    is31fl3236_write_register(index, IS31FL3236_REG_RESET, 0x00);
+
+    // Turn off software shutdown
+    is31fl3236_write_register(index, IS31FL3236_REG_SHUTDOWN, 0x01);
+
+    // Set all PWM values to zero
+    for (uint8_t i = 0; i < IS31FL3236_PWM_REGISTER_COUNT; i++) {
+        is31fl3236_write_register(index, IS31FL3236_REG_PWM + i, 0x00);
+    }
+
+    // turn off all LEDs in the LED control register
+    for (uint8_t i = 0; i < IS31FL3236_LED_CONTROL_REGISTER_COUNT; i++) {
+        is31fl3236_write_register(index, IS31FL3236_REG_LED_CONTROL + i, 0x00);
+    }
+
+    // Set PWM frequency (IS31FL3236A)
+    is31fl3236_write_register(index, IS31FL3236_REG_PWM_FREQUENCY, IS31FL3236_PWM_FREQUENCY);
+
+    // Load PWM registers and LED Control register data
+    is31fl3236_write_register(index, IS31FL3236_REG_UPDATE, 0x01);
+}
+
+void is31fl3236_set_value(int index, uint8_t value) {
+    is31fl3236_led_t led;
+
+    if (index < IS31FL3236_LED_COUNT) {
+        memcpy_P(&led, (&g_is31fl3236_leds[index]), sizeof(led));
+
+        if (driver_buffers[led.driver].pwm_buffer[led.v] == value) {
+            return;
+        }
+
+        driver_buffers[led.driver].pwm_buffer[led.v] = value;
+        driver_buffers[led.driver].pwm_buffer_dirty  = true;
+    }
+}
+
+void is31fl3236_set_value_all(uint8_t value) {
+    for (uint8_t i = 0; i < IS31FL3236_LED_COUNT; i++) {
+        is31fl3236_set_value(i, value);
+    }
+}
+
+void is31fl3236_set_led_control_register(uint8_t index, bool value) {
+    is31fl3236_led_t led;
+    memcpy_P(&led, (&g_is31fl3236_leds[index]), sizeof(led));
+
+    driver_buffers[led.driver].led_control_buffer[led.v] = value ? 0x01 : 0x00;
+    driver_buffers[led.driver].led_control_buffer_dirty  = true;
+}
+
+void is31fl3236_update_pwm_buffers(uint8_t index) {
+    if (driver_buffers[index].pwm_buffer_dirty) {
+        is31fl3236_write_pwm_buffer(index);
+        // Load PWM registers and LED Control register data
+        is31fl3236_write_register(index, IS31FL3236_REG_UPDATE, 0x01);
+
+        driver_buffers[index].pwm_buffer_dirty = false;
+    }
+}
+
+void is31fl3236_update_led_control_registers(uint8_t index) {
+    if (driver_buffers[index].led_control_buffer_dirty) {
+        for (uint8_t i = 0; i < IS31FL3236_LED_CONTROL_REGISTER_COUNT; i++) {
+            is31fl3236_write_register(index, IS31FL3236_REG_LED_CONTROL + i, driver_buffers[index].led_control_buffer[i]);
+        }
+
+        driver_buffers[index].led_control_buffer_dirty = false;
+    }
+}
+
+void is31fl3236_flush(void) {
+    for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
+        is31fl3236_update_pwm_buffers(i);
+    }
+}

drivers/led/issi/is31fl3236-mono.h

@@ -0,0 +1,101 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "progmem.h"
+#include "util.h"
+
+#define IS31FL3236_REG_SHUTDOWN 0x00
+#define IS31FL3236_REG_PWM 0x01
+#define IS31FL3236_REG_UPDATE 0x25
+#define IS31FL3236_REG_LED_CONTROL 0x26
+#define IS31FL3236_REG_GLOBAL_CONTROL 0x4A
+#define IS31FL3236_REG_PWM_FREQUENCY 0x4B
+#define IS31FL3236_REG_RESET 0x4F
+
+#define IS31FL3236_I2C_ADDRESS_GND 0x3C
+#define IS31FL3236_I2C_ADDRESS_SCL 0x3D
+#define IS31FL3236_I2C_ADDRESS_SDA 0x3E
+#define IS31FL3236_I2C_ADDRESS_VCC 0x3F
+
+#if defined(LED_MATRIX_IS31FL3236)
+#    define IS31FL3236_LED_COUNT LED_MATRIX_LED_COUNT
+#endif
+
+#if defined(IS31FL3236_I2C_ADDRESS_4)
+#    define IS31FL3236_DRIVER_COUNT 4
+#elif defined(IS31FL3236_I2C_ADDRESS_3)
+#    define IS31FL3236_DRIVER_COUNT 3
+#elif defined(IS31FL3236_I2C_ADDRESS_2)
+#    define IS31FL3236_DRIVER_COUNT 2
+#elif defined(IS31FL3236_I2C_ADDRESS_1)
+#    define IS31FL3236_DRIVER_COUNT 1
+#endif
+
+typedef struct is31fl3236_led_t {
+    uint8_t driver : 2;
+    uint8_t v;
+} PACKED is31fl3236_led_t;
+
+extern const is31fl3236_led_t PROGMEM g_is31fl3236_leds[IS31FL3236_LED_COUNT];
+
+void is31fl3236_init_drivers(void);
+
+void is31fl3236_init(uint8_t index);
+
+void is31fl3236_write_register(uint8_t index, uint8_t reg, uint8_t data);
+
+void is31fl3236_set_value(int index, uint8_t value);
+
+void is31fl3236_set_value_all(uint8_t value);
+
+void is31fl3236_set_led_control_register(uint8_t index, bool value);
+
+void is31fl3236_update_pwm_buffers(uint8_t index);
+
+void is31fl3236_update_led_control_registers(uint8_t index);
+
+void is31fl3236_flush(void);
+
+#define IS31FL3236_PWM_FREQUENCY_3K_HZ 0b0
+#define IS31FL3236_PWM_FREQUENCY_22K_HZ 0b1
+
+#define OUT1 0x00
+#define OUT2 0x01
+#define OUT3 0x02
+#define OUT4 0x03
+#define OUT5 0x04
+#define OUT6 0x05
+#define OUT7 0x06
+#define OUT8 0x07
+#define OUT9 0x08
+#define OUT10 0x09
+#define OUT11 0x0A
+#define OUT12 0x0B
+#define OUT13 0x0C
+#define OUT14 0x0D
+#define OUT15 0x0E
+#define OUT16 0x0F
+#define OUT17 0x10
+#define OUT18 0x11
+#define OUT19 0x12
+#define OUT20 0x13
+#define OUT21 0x14
+#define OUT22 0x15
+#define OUT23 0x16
+#define OUT24 0x17
+#define OUT25 0x18
+#define OUT26 0x19
+#define OUT27 0x1A
+#define OUT28 0x1B
+#define OUT29 0x1C
+#define OUT30 0x1D
+#define OUT31 0x1E
+#define OUT32 0x1F
+#define OUT33 0x20
+#define OUT34 0x21
+#define OUT35 0x22
+#define OUT36 0x23

drivers/led/issi/is31fl3236.c

@@ -0,0 +1,172 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "is31fl3236.h"
+#include "i2c_master.h"
+#include "gpio.h"
+
+#define IS31FL3236_PWM_REGISTER_COUNT 36
+#define IS31FL3236_LED_CONTROL_REGISTER_COUNT 36
+
+#ifndef IS31FL3236_I2C_TIMEOUT
+#    define IS31FL3236_I2C_TIMEOUT 100
+#endif
+
+#ifndef IS31FL3236_I2C_PERSISTENCE
+#    define IS31FL3236_I2C_PERSISTENCE 0
+#endif
+
+#ifndef IS31FL3236_PWM_FREQUENCY
+#    define IS31FL3236_PWM_FREQUENCY IS31FL3236_PWM_FREQUENCY_3K_HZ // OFS - IS31FL3236A only
+#endif
+
+const uint8_t i2c_addresses[IS31FL3236_DRIVER_COUNT] = {
+    IS31FL3236_I2C_ADDRESS_1,
+#ifdef IS31FL3236_I2C_ADDRESS_2
+    IS31FL3236_I2C_ADDRESS_2,
+#    ifdef IS31FL3236_I2C_ADDRESS_3
+    IS31FL3236_I2C_ADDRESS_3,
+#        ifdef IS31FL3236_I2C_ADDRESS_4
+    IS31FL3236_I2C_ADDRESS_4,
+#        endif
+#    endif
+#endif
+};
+
+typedef struct is31fl3236_driver_t {
+    uint8_t pwm_buffer[IS31FL3236_PWM_REGISTER_COUNT];
+    bool    pwm_buffer_dirty;
+    uint8_t led_control_buffer[IS31FL3236_LED_CONTROL_REGISTER_COUNT];
+    bool    led_control_buffer_dirty;
+} PACKED is31fl3236_driver_t;
+
+is31fl3236_driver_t driver_buffers[IS31FL3236_DRIVER_COUNT] = {{
+    .pwm_buffer               = {0},
+    .pwm_buffer_dirty         = false,
+    .led_control_buffer       = {0},
+    .led_control_buffer_dirty = false,
+}};
+
+void is31fl3236_write_register(uint8_t index, uint8_t reg, uint8_t data) {
+#if IS31FL3236_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3236_I2C_PERSISTENCE; i++) {
+        if (i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3236_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
+    }
+#else
+    i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3236_I2C_TIMEOUT);
+#endif
+}
+
+void is31fl3236_write_pwm_buffer(uint8_t index) {
+#if IS31FL3236_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3236_I2C_PERSISTENCE; i++) {
+        if (i2c_write_register(i2c_addresses[index] << 1, IS31FL3236_REG_PWM, driver_buffers[index].pwm_buffer, 36, IS31FL3236_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
+    }
+#else
+    i2c_write_register(i2c_addresses[index] << 1, IS31FL3236_REG_PWM, driver_buffers[index].pwm_buffer, 36, IS31FL3236_I2C_TIMEOUT);
+#endif
+}
+
+void is31fl3236_init_drivers(void) {
+    i2c_init();
+
+#if defined(IS31FL3236_SDB_PIN)
+    gpio_set_pin_output(IS31FL3236_SDB_PIN);
+    gpio_write_pin_high(IS31FL3236_SDB_PIN);
+#endif
+
+    for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
+        is31fl3236_init(i);
+    }
+
+    for (uint8_t i = 0; i < IS31FL3236_LED_COUNT; i++) {
+        is31fl3236_set_led_control_register(i, true, true, true);
+    }
+
+    for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
+        is31fl3236_update_led_control_registers(i);
+    }
+}
+
+void is31fl3236_init(uint8_t index) {
+    // In case we ever want to reinitialize (?)
+    is31fl3236_write_register(index, IS31FL3236_REG_RESET, 0x00);
+
+    // Turn off software shutdown
+    is31fl3236_write_register(index, IS31FL3236_REG_SHUTDOWN, 0x01);
+
+    // Set all PWM values to zero
+    for (uint8_t i = 0; i < IS31FL3236_PWM_REGISTER_COUNT; i++) {
+        is31fl3236_write_register(index, IS31FL3236_REG_PWM + i, 0x00);
+    }
+
+    // turn off all LEDs in the LED control register
+    for (uint8_t i = 0; i < IS31FL3236_LED_CONTROL_REGISTER_COUNT; i++) {
+        is31fl3236_write_register(index, IS31FL3236_REG_LED_CONTROL + i, 0x00);
+    }
+
+    // Set PWM frequency (IS31FL3236A)
+    is31fl3236_write_register(index, IS31FL3236_REG_PWM_FREQUENCY, IS31FL3236_PWM_FREQUENCY);
+
+    // Load PWM registers and LED Control register data
+    is31fl3236_write_register(index, IS31FL3236_REG_UPDATE, 0x01);
+}
+
+void is31fl3236_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    is31fl3236_led_t led;
+
+    if (index < IS31FL3236_LED_COUNT) {
+        memcpy_P(&led, (&g_is31fl3236_leds[index]), sizeof(led));
+
+        if (driver_buffers[led.driver].pwm_buffer[led.r] == red && driver_buffers[led.driver].pwm_buffer[led.g] == green && driver_buffers[led.driver].pwm_buffer[led.b] == blue) {
+            return;
+        }
+
+        driver_buffers[led.driver].pwm_buffer[led.r] = red;
+        driver_buffers[led.driver].pwm_buffer[led.g] = green;
+        driver_buffers[led.driver].pwm_buffer[led.b] = blue;
+        driver_buffers[led.driver].pwm_buffer_dirty  = true;
+    }
+}
+
+void is31fl3236_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (uint8_t i = 0; i < IS31FL3236_LED_COUNT; i++) {
+        is31fl3236_set_color(i, red, green, blue);
+    }
+}
+
+void is31fl3236_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
+    is31fl3236_led_t led;
+    memcpy_P(&led, (&g_is31fl3236_leds[index]), sizeof(led));
+
+    driver_buffers[led.driver].led_control_buffer[led.r] = red ? 0x01 : 0x00;
+    driver_buffers[led.driver].led_control_buffer[led.g] = green ? 0x01 : 0x00;
+    driver_buffers[led.driver].led_control_buffer[led.b] = blue ? 0x01 : 0x00;
+    driver_buffers[led.driver].led_control_buffer_dirty  = true;
+}
+
+void is31fl3236_update_pwm_buffers(uint8_t index) {
+    if (driver_buffers[index].pwm_buffer_dirty) {
+        is31fl3236_write_pwm_buffer(index);
+        // Load PWM registers and LED Control register data
+        is31fl3236_write_register(index, IS31FL3236_REG_UPDATE, 0x01);
+
+        driver_buffers[index].pwm_buffer_dirty = false;
+    }
+}
+
+void is31fl3236_update_led_control_registers(uint8_t index) {
+    if (driver_buffers[index].led_control_buffer_dirty) {
+        for (uint8_t i = 0; i < IS31FL3236_LED_CONTROL_REGISTER_COUNT; i++) {
+            is31fl3236_write_register(index, IS31FL3236_REG_LED_CONTROL + i, driver_buffers[index].led_control_buffer[i]);
+        }
+
+        driver_buffers[index].led_control_buffer_dirty = false;
+    }
+}
+
+void is31fl3236_flush(void) {
+    for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
+        is31fl3236_update_pwm_buffers(i);
+    }
+}

drivers/led/issi/is31fl3236.h

@@ -0,0 +1,103 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "progmem.h"
+#include "util.h"
+
+#define IS31FL3236_REG_SHUTDOWN 0x00
+#define IS31FL3236_REG_PWM 0x01
+#define IS31FL3236_REG_UPDATE 0x25
+#define IS31FL3236_REG_LED_CONTROL 0x26
+#define IS31FL3236_REG_GLOBAL_CONTROL 0x4A
+#define IS31FL3236_REG_PWM_FREQUENCY 0x4B
+#define IS31FL3236_REG_RESET 0x4F
+
+#define IS31FL3236_I2C_ADDRESS_GND 0x3C
+#define IS31FL3236_I2C_ADDRESS_SCL 0x3D
+#define IS31FL3236_I2C_ADDRESS_SDA 0x3E
+#define IS31FL3236_I2C_ADDRESS_VCC 0x3F
+
+#if defined(RGB_MATRIX_IS31FL3236)
+#    define IS31FL3236_LED_COUNT RGB_MATRIX_LED_COUNT
+#endif
+
+#if defined(IS31FL3236_I2C_ADDRESS_4)
+#    define IS31FL3236_DRIVER_COUNT 4
+#elif defined(IS31FL3236_I2C_ADDRESS_3)
+#    define IS31FL3236_DRIVER_COUNT 3
+#elif defined(IS31FL3236_I2C_ADDRESS_2)
+#    define IS31FL3236_DRIVER_COUNT 2
+#elif defined(IS31FL3236_I2C_ADDRESS_1)
+#    define IS31FL3236_DRIVER_COUNT 1
+#endif
+
+typedef struct is31fl3236_led_t {
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
+} PACKED is31fl3236_led_t;
+
+extern const is31fl3236_led_t PROGMEM g_is31fl3236_leds[IS31FL3236_LED_COUNT];
+
+void is31fl3236_init_drivers(void);
+
+void is31fl3236_init(uint8_t index);
+
+void is31fl3236_write_register(uint8_t index, uint8_t reg, uint8_t data);
+
+void is31fl3236_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+
+void is31fl3236_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+
+void is31fl3236_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
+
+void is31fl3236_update_pwm_buffers(uint8_t index);
+
+void is31fl3236_update_led_control_registers(uint8_t index);
+
+void is31fl3236_flush(void);
+
+#define IS31FL3236_PWM_FREQUENCY_3K_HZ 0b0
+#define IS31FL3236_PWM_FREQUENCY_22K_HZ 0b1
+
+#define OUT1 0x00
+#define OUT2 0x01
+#define OUT3 0x02
+#define OUT4 0x03
+#define OUT5 0x04
+#define OUT6 0x05
+#define OUT7 0x06
+#define OUT8 0x07
+#define OUT9 0x08
+#define OUT10 0x09
+#define OUT11 0x0A
+#define OUT12 0x0B
+#define OUT13 0x0C
+#define OUT14 0x0D
+#define OUT15 0x0E
+#define OUT16 0x0F
+#define OUT17 0x10
+#define OUT18 0x11
+#define OUT19 0x12
+#define OUT20 0x13
+#define OUT21 0x14
+#define OUT22 0x15
+#define OUT23 0x16
+#define OUT24 0x17
+#define OUT25 0x18
+#define OUT26 0x19
+#define OUT27 0x1A
+#define OUT28 0x1B
+#define OUT29 0x1C
+#define OUT30 0x1D
+#define OUT31 0x1E
+#define OUT32 0x1F
+#define OUT33 0x20
+#define OUT34 0x21
+#define OUT35 0x22
+#define OUT36 0x23

drivers/ps2/ps2_mouse.c

@@ -88,6 +88,8 @@ void ps2_mouse_task(void) {
 #    endif
     } else {
         if (debug_mouse) print("ps2_mouse: fail to get mouse packet\n");
+        /* return here to avoid updating the mouse button state */
+        return;
     }
 #else
     if (pbuf_has_data()) {
@@ -99,6 +101,8 @@ void ps2_mouse_task(void) {
 #    endif
     } else {
         if (debug_mouse) print("ps2_mouse: fail to get mouse packet\n");
+        /* return here to avoid updating the mouse button state */
+        return;
     }
 #endif
 

drivers/ws2812.h

@@ -62,6 +62,8 @@
 #    define WS2812_LED_COUNT RGB_MATRIX_LED_COUNT
 #endif
 
+void ws2812_init(void);
+
 /* User Interface
  *
  * Input:

keyboards/0_sixty/config.h

@@ -1,38 +0,0 @@
-/* Copyright 2020 Vinam Arora <vinam@posteo.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/0_sixty/info.json

@@ -20,6 +20,12 @@
     "build": {
         "lto": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/0_sixty/keymaps/default/keymap.c

@@ -154,7 +154,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_ADJUST] = LAYOUT_ortho_5x12(
   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
-  _______, QK_BOOT,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
+  _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
   _______, _______, _______, _______, _______, _______, _______, QWERTY,  COLEMAK, DVORAK,  _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______

keyboards/0_sixty/keymaps/default/readme.md

@@ -1 +0,0 @@
-# The default 0-Sixty layout - largely based on the Preonic's and Planck's

keyboards/0_sixty/keymaps/via/keymap.c

@@ -111,7 +111,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_ADJUST] = LAYOUT_ortho_5x12(
   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
-  _______, QK_BOOT,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______

keyboards/0_sixty/keymaps/via/readme.md

@@ -1 +0,0 @@
-# The default via-supported 0-Sixty layout - largely based on the Preonic's and Planck's

keyboards/0xc7/61key/config.h

@@ -1,39 +0,0 @@
-/*
-Copyright 2021 0xC7
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/0xc7/61key/info.json

@@ -1,92 +0,0 @@
-{
-    "keyboard_name": "61Key",
-    "manufacturer": "0xC7",
-    "url": "",
-    "maintainer": "RealEmanGaming",
-    "usb": {
-        "vid": "0xE117",
-        "pid": "0x6161",
-        "device_version": "0.0.1"
-    },
-    "matrix_pins": {
-        "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "F7", "F6", "F5", "F4", "F1", "F0"],
-        "rows": ["B0", "B1", "B2", "B3", "B7"]
-    },
-    "diode_direction": "COL2ROW",
-    "processor": "atmega32u4",
-    "bootloader": "atmel-dfu",
-    "layout_aliases": {
-        "LAYOUT": "LAYOUT_60_ansi"
-    },
-    "layouts": {
-        "LAYOUT_60_ansi": {
-            "layout": [
-                {"matrix": [0, 0], "x": 0, "y": 0},
-                {"matrix": [0, 1], "x": 1, "y": 0},
-                {"matrix": [0, 2], "x": 2, "y": 0},
-                {"matrix": [0, 3], "x": 3, "y": 0},
-                {"matrix": [0, 4], "x": 4, "y": 0},
-                {"matrix": [0, 5], "x": 5, "y": 0},
-                {"matrix": [0, 6], "x": 6, "y": 0},
-                {"matrix": [0, 7], "x": 7, "y": 0},
-                {"matrix": [0, 8], "x": 8, "y": 0},
-                {"matrix": [0, 9], "x": 9, "y": 0},
-                {"matrix": [0, 10], "x": 10, "y": 0},
-                {"matrix": [0, 11], "x": 11, "y": 0},
-                {"matrix": [0, 12], "x": 12, "y": 0},
-                {"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
-
-                {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
-                {"matrix": [1, 1], "x": 1.5, "y": 1},
-                {"matrix": [1, 2], "x": 2.5, "y": 1},
-                {"matrix": [1, 3], "x": 3.5, "y": 1},
-                {"matrix": [1, 4], "x": 4.5, "y": 1},
-                {"matrix": [1, 5], "x": 5.5, "y": 1},
-                {"matrix": [1, 6], "x": 6.5, "y": 1},
-                {"matrix": [1, 7], "x": 7.5, "y": 1},
-                {"matrix": [1, 8], "x": 8.5, "y": 1},
-                {"matrix": [1, 9], "x": 9.5, "y": 1},
-                {"matrix": [1, 10], "x": 10.5, "y": 1},
-                {"matrix": [1, 11], "x": 11.5, "y": 1},
-                {"matrix": [1, 12], "x": 12.5, "y": 1},
-                {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
-
-                {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
-                {"matrix": [2, 1], "x": 1.75, "y": 2},
-                {"matrix": [2, 2], "x": 2.75, "y": 2},
-                {"matrix": [2, 3], "x": 3.75, "y": 2},
-                {"matrix": [2, 4], "x": 4.75, "y": 2},
-                {"matrix": [2, 5], "x": 5.75, "y": 2},
-                {"matrix": [2, 6], "x": 6.75, "y": 2},
-                {"matrix": [2, 7], "x": 7.75, "y": 2},
-                {"matrix": [2, 8], "x": 8.75, "y": 2},
-                {"matrix": [2, 9], "x": 9.75, "y": 2},
-                {"matrix": [2, 10], "x": 10.75, "y": 2},
-                {"matrix": [2, 11], "x": 11.75, "y": 2},
-                {"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
-
-                {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
-                {"matrix": [3, 1], "x": 2.25, "y": 3},
-                {"matrix": [3, 2], "x": 3.25, "y": 3},
-                {"matrix": [3, 3], "x": 4.25, "y": 3},
-                {"matrix": [3, 4], "x": 5.25, "y": 3},
-                {"matrix": [3, 5], "x": 6.25, "y": 3},
-                {"matrix": [3, 6], "x": 7.25, "y": 3},
-                {"matrix": [3, 7], "x": 8.25, "y": 3},
-                {"matrix": [3, 8], "x": 9.25, "y": 3},
-                {"matrix": [3, 9], "x": 10.25, "y": 3},
-                {"matrix": [3, 10], "x": 11.25, "y": 3},
-                {"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
-
-                {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
-                {"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
-                {"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
-                {"matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25},
-                {"matrix": [4, 8], "x": 10, "y": 4, "w": 1.25},
-                {"matrix": [4, 9], "x": 11.25, "y": 4, "w": 1.25},
-                {"matrix": [4, 11], "x": 12.5, "y": 4, "w": 1.25},
-                {"matrix": [4, 13], "x": 13.75, "y": 4, "w": 1.25}
-            ]
-        }
-    }
-}

keyboards/0xc7/61key/keyboard.json

@@ -0,0 +1,110 @@
+{
+    "keyboard_name": "61Key",
+    "manufacturer": "0xC7",
+    "url": "",
+    "maintainer": "RealEmanGaming",
+    "usb": {
+        "vid": "0xE117",
+        "pid": "0x6161",
+        "device_version": "0.0.1"
+    },
+    "build": {
+        "lto": true
+    },
+    "features": {
+        "bootmagic": true,
+        "command": true,
+        "console": false,
+        "extrakey": false,
+        "key_lock": true,
+        "mousekey": false,
+        "nkro": false
+    },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
+    "matrix_pins": {
+        "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "F7", "F6", "F5", "F4", "F1", "F0"],
+        "rows": ["B0", "B1", "B2", "B3", "B7"]
+    },
+    "diode_direction": "COL2ROW",
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "layout_aliases": {
+        "LAYOUT": "LAYOUT_60_ansi"
+    },
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
+
+                {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
+
+                {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
+
+                {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
+                {"matrix": [3, 1], "x": 2.25, "y": 3},
+                {"matrix": [3, 2], "x": 3.25, "y": 3},
+                {"matrix": [3, 3], "x": 4.25, "y": 3},
+                {"matrix": [3, 4], "x": 5.25, "y": 3},
+                {"matrix": [3, 5], "x": 6.25, "y": 3},
+                {"matrix": [3, 6], "x": 7.25, "y": 3},
+                {"matrix": [3, 7], "x": 8.25, "y": 3},
+                {"matrix": [3, 8], "x": 9.25, "y": 3},
+                {"matrix": [3, 9], "x": 10.25, "y": 3},
+                {"matrix": [3, 10], "x": 11.25, "y": 3},
+                {"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
+
+                {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
+                {"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
+                {"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
+                {"matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25},
+                {"matrix": [4, 8], "x": 10, "y": 4, "w": 1.25},
+                {"matrix": [4, 9], "x": 11.25, "y": 4, "w": 1.25},
+                {"matrix": [4, 11], "x": 12.5, "y": 4, "w": 1.25},
+                {"matrix": [4, 13], "x": 13.75, "y": 4, "w": 1.25}
+            ]
+        }
+    }
+}

keyboards/0xc7/61key/rules.mk

@@ -1,15 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = no       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = yes         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
-LTO_ENABLE = yes
-KEY_LOCK_ENABLE = yes

keyboards/0xcb/1337/config.h

@@ -19,10 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* default setup after eeprom reset */
 #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_EFFECT_BREATHING + 2
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
 /* Oled Size */
 #define OLED_DISPLAY_128X64
 #define OLED_FONT_END 255

keyboards/0xcb/1337/info.json

@@ -1,77 +0,0 @@
-{
-  "keyboard_name": "1337",
-  "manufacturer": "0xCB",
-  "url": "https://0xCB.dev",
-  "maintainer": "Conor-Burns",
-  "usb": {
-    "vid": "0xCB00",
-    "pid": "0x1337",
-    "device_version": "0.0.1"
-  },
-  "backlight": {
-    "pin": "B5",
-    "levels": 7,
-    "breathing": true
-  },
-  "encoder": {
-    "rotary": [
-      {"pin_a": "F6", "pin_b": "F5"}
-    ]
-  },
-  "qmk": {
-    "tap_keycode_delay": 10
-  },
-  "qmk_lufa_bootloader": {
-    "led": "B0"
-  },
-  "rgblight": {
-    "saturation_steps": 8,
-    "brightness_steps": 8,
-    "led_count": 4,
-    "sleep": true,
-    "animations": {
-      "breathing": true,
-      "rainbow_mood": true,
-      "rainbow_swirl": true,
-      "snake": true,
-      "knight": true,
-      "christmas": true,
-      "static_gradient": true,
-      "rgb_test": true,
-      "alternating": true,
-      "twinkle": true
-    },
-    "default": {
-      "hue": 152,
-      "sat": 232,
-      "speed": 2
-    }
-  },
-  "ws2812": {
-    "pin": "D3"
-  },
-  "processor": "atmega32u4",
-  "bootloader": "qmk-dfu",
-  "matrix_pins": {
-    "direct": [
-      ["D2", "D4", "F4"],
-      ["D7", "B1", "B3"],
-      ["E6", "B4", "B2"]
-    ]
-  },
-  "layouts": {
-    "LAYOUT": {
-      "layout": [
-        {"x": 0, "y": 0, "matrix": [0, 0]},
-        {"x": 1, "y": 0, "matrix": [0, 1]},
-        {"x": 2, "y": 0, "matrix": [0, 2]},
-        {"x": 0, "y": 1, "matrix": [1, 0]},
-        {"x": 1, "y": 1, "matrix": [1, 1]},
-        {"x": 2, "y": 1, "matrix": [1, 2]},
-        {"x": 0, "y": 2, "matrix": [2, 0]},
-        {"x": 1, "y": 2, "matrix": [2, 1]},
-        {"x": 2, "y": 2, "matrix": [2, 2]}
-      ]
-    }
-  }
-}

keyboards/0xcb/1337/keyboard.json

@@ -0,0 +1,98 @@
+{
+  "keyboard_name": "1337",
+  "manufacturer": "0xCB",
+  "url": "https://0xCB.dev",
+  "maintainer": "Conor-Burns",
+  "usb": {
+    "vid": "0xCB00",
+    "pid": "0x1337",
+    "device_version": "0.0.1"
+  },
+  "backlight": {
+    "pin": "B5",
+    "levels": 7,
+    "breathing": true
+  },
+  "encoder": {
+    "rotary": [
+      {"pin_a": "F6", "pin_b": "F5"}
+    ]
+  },
+  "qmk": {
+    "locking": {
+      "enabled": true,
+      "resync": true
+    },
+    "tap_keycode_delay": 10
+  },
+  "qmk_lufa_bootloader": {
+    "led": "B0"
+  },
+  "rgblight": {
+    "saturation_steps": 8,
+    "brightness_steps": 8,
+    "led_count": 4,
+    "sleep": true,
+    "animations": {
+      "breathing": true,
+      "rainbow_mood": true,
+      "rainbow_swirl": true,
+      "snake": true,
+      "knight": true,
+      "christmas": true,
+      "static_gradient": true,
+      "rgb_test": true,
+      "alternating": true,
+      "twinkle": true
+    },
+    "default": {
+      "hue": 152,
+      "sat": 232,
+      "speed": 2
+    }
+  },
+  "ws2812": {
+    "pin": "D3"
+  },
+  "processor": "atmega32u4",
+  "bootloader": "qmk-dfu",
+  "build": {
+    "lto": true
+  },
+  "features": {
+    "backlight": true,
+    "bootmagic": true,
+    "command": false,
+    "console": false,
+    "encoder": true,
+    "extrakey": true,
+    "mousekey": true,
+    "nkro": false,
+    "oled": true,
+    "rgblight": true
+  },
+  "matrix_pins": {
+    "direct": [
+      ["D2", "D4", "F4"],
+      ["D7", "B1", "B3"],
+      ["E6", "B4", "B2"]
+    ]
+  },
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"x": 0, "y": 0, "matrix": [0, 0]},
+        {"x": 1, "y": 0, "matrix": [0, 1]},
+        {"x": 2, "y": 0, "matrix": [0, 2]},
+
+        {"x": 0, "y": 1, "matrix": [1, 0]},
+        {"x": 1, "y": 1, "matrix": [1, 1]},
+        {"x": 2, "y": 1, "matrix": [1, 2]},
+
+        {"x": 0, "y": 2, "matrix": [2, 0]},
+        {"x": 1, "y": 2, "matrix": [2, 1]},
+        {"x": 2, "y": 2, "matrix": [2, 2]}
+      ]
+    }
+  }
+}

keyboards/0xcb/1337/rules.mk

@@ -1,16 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes 	    # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no	        # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
-ENCODER_ENABLE = yes
-LTO_ENABLE = yes
-OLED_ENABLE = yes

keyboards/0xcb/splaytoraid/32u4/keyboard.json

@@ -0,0 +1,27 @@
+{
+    "development_board": "promicro",
+    "bootloader": "qmk-dfu",
+    "matrix_pins": {
+        "cols": ["F5", "F6", "F7", "F4", "B3", "B1", "B2"],
+        "rows": ["D3", "D2", "D1", "D4", "D7", "E6", "B4", "C6"]
+    },
+    "diode_direction": "COL2ROW",
+    "rgb_matrix": {
+        "animations": {
+            "band_sat": true,
+            "band_spiral_val": true,
+            "breathing": true,
+            "cycle_all": true,
+            "cycle_left_right": true,
+            "raindrops": true
+        }
+    },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B5", "pin_b": "B6"}
+        ]
+    },
+    "ws2812": {
+        "pin": "D0"
+    }
+}

keyboards/0xcb/splaytoraid/info.json

@@ -3,13 +3,6 @@
     "keyboard_name": "splaytoraid",
     "maintainer": "freya-irl",
     "url": "https://github.com/freya-irl/splaytoraid40",
-    "development_board": "promicro",
-    "bootloader": "qmk-dfu",
-    "diode_direction": "COL2ROW",
-    "matrix_pins": {
-        "cols": ["F5", "F6", "F7", "F4", "B3", "B1", "B2"],
-        "rows": ["D3", "D2", "D1", "D4", "D7", "E6", "B4", "C6"]
-    },
     "usb": {
         "device_version": "1.0.0",
         "pid": "0xCB00",
@@ -21,7 +14,8 @@
         "bootmagic": true,
         "console": true,
         "mousekey": true,
-        "nkro": true
+        "nkro": true,
+        "encoder": true
     },
     "bootmagic": {
         "matrix": [1, 0]
@@ -29,21 +23,7 @@
     "build": {
         "lto": true
     },
-    "encoder": {
-        "enabled": true,
-        "rotary": [
-            {"pin_a": "B5", "pin_b": "B6", "resolution": 4}
-        ]
-    },
     "rgb_matrix": {
-        "animations": {
-            "breathing": true,
-            "band_sat": true,
-            "band_spiral_val": true,
-            "cycle_all": true,
-            "raindrops": true,
-            "cycle_left_right": true
-        },
         "default": {
             "animation": "breathing",
             "hue": 152,
@@ -73,9 +53,6 @@
         ],
         "max_brightness": 200
     },
-    "ws2812": {
-        "pin": "D0"
-    },
     "layouts": {
         "LAYOUT_36": {
             "layout": [

keyboards/0xcb/splaytoraid/rp2040_ce/info.json

@@ -1,26 +0,0 @@
-{
-    "rgb_matrix": {
-        "animations": {
-            "cycle_up_down": true,
-            "jellybean_raindrops": true,
-            "cycle_out_in": true,
-            "cycle_out_in_dual": true,
-            "pixel_fractal": true,
-            "rainbow_moving_chevron": true,
-            "cycle_pinwheel": true,
-            "pixel_rain": true,
-            "dual_beacon": true,
-            "hue_breathing": true,
-            "typing_heatmap": true,
-            "digital_rain": true,
-            "solid_reactive_simple": true,
-            "solid_reactive": true,
-            "splash": true,
-            "multisplash": true,
-            "solid_splash": true
-        }
-    },
-    "ws2812": {
-        "driver": "vendor"
-    }
-}

keyboards/0xcb/splaytoraid/rp2040_ce/keyboard.json

@@ -0,0 +1,44 @@
+{
+    "development_board": "promicro_rp2040",
+    "matrix_pins": {
+        "cols": ["GP28", "GP27", "GP26", "GP29", "GP20", "GP22", "GP23"],
+        "rows": ["GP0", "GP1", "GP2", "GP4", "GP6", "GP7", "GP8", "GP5"]
+    },
+    "diode_direction": "COL2ROW",
+    "rgb_matrix": {
+        "animations": {
+            "band_sat": true,
+            "band_spiral_val": true,
+            "breathing": true,
+            "cycle_all": true,
+            "cycle_left_right": true,
+            "cycle_out_in": true,
+            "cycle_out_in_dual": true,
+            "cycle_pinwheel": true,
+            "cycle_up_down": true,
+            "digital_rain": true,
+            "dual_beacon": true,
+            "hue_breathing": true,
+            "jellybean_raindrops": true,
+            "multisplash": true,
+            "pixel_fractal": true,
+            "pixel_rain": true,
+            "rainbow_moving_chevron": true,
+            "raindrops": true,
+            "solid_reactive": true,
+            "solid_reactive_simple": true,
+            "solid_splash": true,
+            "splash": true,
+            "typing_heatmap": true
+        }
+    },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "GP9", "pin_b": "GP21"}
+        ]
+    },
+    "ws2812": {
+        "pin": "GP3",
+        "driver": "vendor"
+    }
+}

keyboards/0xcb/splaytoraid/rp2040_ce/rules.mk

@@ -1 +0,0 @@
-CONVERT_TO = rp2040_ce

keyboards/0xcb/static/config.h

@@ -16,11 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 /* oled custom font */
 #define OLED_FONT_END 255
 #define OLED_FONT_H "gfxfont.c"

keyboards/0xcb/static/info.json

@@ -1,132 +0,0 @@
-{
-  "keyboard_name": "Static",
-  "manufacturer": "0xCB",
-  "url": "https://0xCB.dev",
-  "maintainer": "Conor-Burns",
-  "usb": {
-    "vid": "0xCB00",
-    "pid": "0xA455",
-    "device_version": "0.0.1"
-  },
-  "matrix_pins": {
-    "cols": ["B5", "D4", "C0", "C1", "C2", "C3"],
-    "rows": ["D5", "D6", "D7", "B0", "B1", "B2", "B3", "B4"]
-  },
-  "diode_direction": "COL2ROW",
-  "encoder": {
-    "rotary": [
-      {"pin_a": "D0", "pin_b": "D1"}
-    ]
-  },
-  "qmk": {
-    "tap_keycode_delay": 10
-  },
-  "processor": "atmega328p",
-  "bootloader": "usbasploader",
-  "layout_aliases": {
-    "LAYOUT": "LAYOUT_all"
-  },
-  "layouts": {
-    "LAYOUT_all": {
-      "layout": [
-        {"matrix": [1, 5], "x": 11, "y": 0},
-
-        {"matrix": [0, 0], "x": 0, "y": 1},
-        {"matrix": [1, 0], "x": 1, "y": 1},
-        {"matrix": [0, 1], "x": 2, "y": 1},
-        {"matrix": [1, 1], "x": 3, "y": 1},
-        {"matrix": [0, 2], "x": 4, "y": 1},
-        {"matrix": [1, 2], "x": 5, "y": 1},
-        {"matrix": [0, 3], "x": 6, "y": 1},
-        {"matrix": [1, 3], "x": 7, "y": 1},
-        {"matrix": [0, 4], "x": 8, "y": 1},
-        {"matrix": [1, 4], "x": 9, "y": 1},
-        {"matrix": [0, 5], "x": 10, "y": 1},
-        {"matrix": [3, 5], "x": 11, "y": 1},
-
-        {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.25},
-        {"matrix": [3, 0], "x": 1.25, "y": 2},
-        {"matrix": [2, 1], "x": 2.25, "y": 2},
-        {"matrix": [3, 1], "x": 3.25, "y": 2},
-        {"matrix": [2, 2], "x": 4.25, "y": 2},
-        {"matrix": [3, 2], "x": 5.25, "y": 2},
-        {"matrix": [2, 3], "x": 6.25, "y": 2},
-        {"matrix": [3, 3], "x": 7.25, "y": 2},
-        {"matrix": [2, 4], "x": 8.25, "y": 2},
-        {"matrix": [3, 4], "x": 9.25, "y": 2},
-        {"matrix": [2, 5], "x": 10.25, "y": 2, "w": 1.75},
-
-        {"matrix": [4, 0], "x": 0, "y": 3, "w": 1.75},
-        {"matrix": [4, 1], "x": 1.75, "y": 3},
-        {"matrix": [5, 1], "x": 2.75, "y": 3},
-        {"matrix": [4, 2], "x": 3.75, "y": 3},
-        {"matrix": [5, 2], "x": 4.75, "y": 3},
-        {"matrix": [4, 3], "x": 5.75, "y": 3},
-        {"matrix": [5, 3], "x": 6.75, "y": 3},
-        {"matrix": [4, 4], "x": 7.75, "y": 3},
-        {"matrix": [5, 4], "x": 8.75, "y": 3},
-        {"matrix": [4, 5], "x": 9.75, "y": 3},
-        {"matrix": [5, 5], "x": 10.75, "y": 3, "w": 1.25},
-
-        {"matrix": [6, 0], "x": 0, "y": 4},
-        {"matrix": [7, 0], "x": 1, "y": 4},
-        {"matrix": [6, 1], "x": 2, "y": 4},
-        {"matrix": [7, 1], "x": 3, "y": 4, "w": 2.75},
-        {"matrix": [7, 2], "x": 5.75, "y": 4},
-        {"matrix": [6, 4], "x": 6.75, "y": 4, "w": 2.25},
-        {"matrix": [7, 4], "x": 9, "y": 4},
-        {"matrix": [6, 5], "x": 10, "y": 4},
-        {"matrix": [7, 5], "x": 11, "y": 4}
-      ]
-    },
-    "LAYOUT_bigbar": {
-      "layout": [
-        {"matrix": [1, 5], "x": 11, "y": 0},
-
-        {"matrix": [0, 0], "x": 0, "y": 1},
-        {"matrix": [1, 0], "x": 1, "y": 1},
-        {"matrix": [0, 1], "x": 2, "y": 1},
-        {"matrix": [1, 1], "x": 3, "y": 1},
-        {"matrix": [0, 2], "x": 4, "y": 1},
-        {"matrix": [1, 2], "x": 5, "y": 1},
-        {"matrix": [0, 3], "x": 6, "y": 1},
-        {"matrix": [1, 3], "x": 7, "y": 1},
-        {"matrix": [0, 4], "x": 8, "y": 1},
-        {"matrix": [1, 4], "x": 9, "y": 1},
-        {"matrix": [0, 5], "x": 10, "y": 1},
-        {"matrix": [3, 5], "x": 11, "y": 1},
-
-        {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.25},
-        {"matrix": [3, 0], "x": 1.25, "y": 2},
-        {"matrix": [2, 1], "x": 2.25, "y": 2},
-        {"matrix": [3, 1], "x": 3.25, "y": 2},
-        {"matrix": [2, 2], "x": 4.25, "y": 2},
-        {"matrix": [3, 2], "x": 5.25, "y": 2},
-        {"matrix": [2, 3], "x": 6.25, "y": 2},
-        {"matrix": [3, 3], "x": 7.25, "y": 2},
-        {"matrix": [2, 4], "x": 8.25, "y": 2},
-        {"matrix": [3, 4], "x": 9.25, "y": 2},
-        {"matrix": [2, 5], "x": 10.25, "y": 2, "w": 1.75},
-
-        {"matrix": [4, 0], "x": 0, "y": 3, "w": 1.75},
-        {"matrix": [4, 1], "x": 1.75, "y": 3},
-        {"matrix": [5, 1], "x": 2.75, "y": 3},
-        {"matrix": [4, 2], "x": 3.75, "y": 3},
-        {"matrix": [5, 2], "x": 4.75, "y": 3},
-        {"matrix": [4, 3], "x": 5.75, "y": 3},
-        {"matrix": [5, 3], "x": 6.75, "y": 3},
-        {"matrix": [4, 4], "x": 7.75, "y": 3},
-        {"matrix": [5, 4], "x": 8.75, "y": 3},
-        {"matrix": [4, 5], "x": 9.75, "y": 3},
-        {"matrix": [5, 5], "x": 10.75, "y": 3, "w": 1.25},
-
-        {"matrix": [6, 0], "x": 0, "y": 4, "w": 1.25},
-        {"matrix": [7, 0], "x": 1.25, "y": 4},
-        {"matrix": [6, 1], "x": 2.25, "y": 4},
-        {"matrix": [7, 2], "x": 3.25, "y": 4, "w": 6.25},
-        {"matrix": [6, 5], "x": 9.5, "y": 4, "w": 1.25},
-        {"matrix": [7, 5], "x": 10.75, "y": 4, "w": 1.25}
-      ]
-    }
-  }
-}

keyboards/0xcb/static/keyboard.json

@@ -0,0 +1,149 @@
+{
+  "keyboard_name": "Static",
+  "manufacturer": "0xCB",
+  "url": "https://0xCB.dev",
+  "maintainer": "Conor-Burns",
+  "usb": {
+    "vid": "0xCB00",
+    "pid": "0xA455",
+    "device_version": "0.0.1"
+  },
+  "build": {
+    "lto": true
+  },
+  "features": {
+    "bootmagic": true,
+    "command": false,
+    "console": false,
+    "encoder": true,
+    "extrakey": true,
+    "mousekey": true,
+    "nkro": false,
+    "oled": true
+  },
+  "matrix_pins": {
+    "cols": ["B5", "D4", "C0", "C1", "C2", "C3"],
+    "rows": ["D5", "D6", "D7", "B0", "B1", "B2", "B3", "B4"]
+  },
+  "diode_direction": "COL2ROW",
+  "encoder": {
+    "rotary": [
+      {"pin_a": "D0", "pin_b": "D1"}
+    ]
+  },
+  "qmk": {
+    "locking": {
+      "enabled": true,
+      "resync": true
+    },
+    "tap_keycode_delay": 10
+  },
+  "processor": "atmega328p",
+  "bootloader": "usbasploader",
+  "layout_aliases": {
+    "LAYOUT": "LAYOUT_all"
+  },
+  "layouts": {
+    "LAYOUT_all": {
+      "layout": [
+        {"matrix": [1, 5], "x": 11, "y": 0},
+
+        {"matrix": [0, 0], "x": 0, "y": 1},
+        {"matrix": [1, 0], "x": 1, "y": 1},
+        {"matrix": [0, 1], "x": 2, "y": 1},
+        {"matrix": [1, 1], "x": 3, "y": 1},
+        {"matrix": [0, 2], "x": 4, "y": 1},
+        {"matrix": [1, 2], "x": 5, "y": 1},
+        {"matrix": [0, 3], "x": 6, "y": 1},
+        {"matrix": [1, 3], "x": 7, "y": 1},
+        {"matrix": [0, 4], "x": 8, "y": 1},
+        {"matrix": [1, 4], "x": 9, "y": 1},
+        {"matrix": [0, 5], "x": 10, "y": 1},
+        {"matrix": [3, 5], "x": 11, "y": 1},
+
+        {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.25},
+        {"matrix": [3, 0], "x": 1.25, "y": 2},
+        {"matrix": [2, 1], "x": 2.25, "y": 2},
+        {"matrix": [3, 1], "x": 3.25, "y": 2},
+        {"matrix": [2, 2], "x": 4.25, "y": 2},
+        {"matrix": [3, 2], "x": 5.25, "y": 2},
+        {"matrix": [2, 3], "x": 6.25, "y": 2},
+        {"matrix": [3, 3], "x": 7.25, "y": 2},
+        {"matrix": [2, 4], "x": 8.25, "y": 2},
+        {"matrix": [3, 4], "x": 9.25, "y": 2},
+        {"matrix": [2, 5], "x": 10.25, "y": 2, "w": 1.75},
+
+        {"matrix": [4, 0], "x": 0, "y": 3, "w": 1.75},
+        {"matrix": [4, 1], "x": 1.75, "y": 3},
+        {"matrix": [5, 1], "x": 2.75, "y": 3},
+        {"matrix": [4, 2], "x": 3.75, "y": 3},
+        {"matrix": [5, 2], "x": 4.75, "y": 3},
+        {"matrix": [4, 3], "x": 5.75, "y": 3},
+        {"matrix": [5, 3], "x": 6.75, "y": 3},
+        {"matrix": [4, 4], "x": 7.75, "y": 3},
+        {"matrix": [5, 4], "x": 8.75, "y": 3},
+        {"matrix": [4, 5], "x": 9.75, "y": 3},
+        {"matrix": [5, 5], "x": 10.75, "y": 3, "w": 1.25},
+
+        {"matrix": [6, 0], "x": 0, "y": 4},
+        {"matrix": [7, 0], "x": 1, "y": 4},
+        {"matrix": [6, 1], "x": 2, "y": 4},
+        {"matrix": [7, 1], "x": 3, "y": 4, "w": 2.75},
+        {"matrix": [7, 2], "x": 5.75, "y": 4},
+        {"matrix": [6, 4], "x": 6.75, "y": 4, "w": 2.25},
+        {"matrix": [7, 4], "x": 9, "y": 4},
+        {"matrix": [6, 5], "x": 10, "y": 4},
+        {"matrix": [7, 5], "x": 11, "y": 4}
+      ]
+    },
+    "LAYOUT_bigbar": {
+      "layout": [
+        {"matrix": [1, 5], "x": 11, "y": 0},
+
+        {"matrix": [0, 0], "x": 0, "y": 1},
+        {"matrix": [1, 0], "x": 1, "y": 1},
+        {"matrix": [0, 1], "x": 2, "y": 1},
+        {"matrix": [1, 1], "x": 3, "y": 1},
+        {"matrix": [0, 2], "x": 4, "y": 1},
+        {"matrix": [1, 2], "x": 5, "y": 1},
+        {"matrix": [0, 3], "x": 6, "y": 1},
+        {"matrix": [1, 3], "x": 7, "y": 1},
+        {"matrix": [0, 4], "x": 8, "y": 1},
+        {"matrix": [1, 4], "x": 9, "y": 1},
+        {"matrix": [0, 5], "x": 10, "y": 1},
+        {"matrix": [3, 5], "x": 11, "y": 1},
+
+        {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.25},
+        {"matrix": [3, 0], "x": 1.25, "y": 2},
+        {"matrix": [2, 1], "x": 2.25, "y": 2},
+        {"matrix": [3, 1], "x": 3.25, "y": 2},
+        {"matrix": [2, 2], "x": 4.25, "y": 2},
+        {"matrix": [3, 2], "x": 5.25, "y": 2},
+        {"matrix": [2, 3], "x": 6.25, "y": 2},
+        {"matrix": [3, 3], "x": 7.25, "y": 2},
+        {"matrix": [2, 4], "x": 8.25, "y": 2},
+        {"matrix": [3, 4], "x": 9.25, "y": 2},
+        {"matrix": [2, 5], "x": 10.25, "y": 2, "w": 1.75},
+
+        {"matrix": [4, 0], "x": 0, "y": 3, "w": 1.75},
+        {"matrix": [4, 1], "x": 1.75, "y": 3},
+        {"matrix": [5, 1], "x": 2.75, "y": 3},
+        {"matrix": [4, 2], "x": 3.75, "y": 3},
+        {"matrix": [5, 2], "x": 4.75, "y": 3},
+        {"matrix": [4, 3], "x": 5.75, "y": 3},
+        {"matrix": [5, 3], "x": 6.75, "y": 3},
+        {"matrix": [4, 4], "x": 7.75, "y": 3},
+        {"matrix": [5, 4], "x": 8.75, "y": 3},
+        {"matrix": [4, 5], "x": 9.75, "y": 3},
+        {"matrix": [5, 5], "x": 10.75, "y": 3, "w": 1.25},
+
+        {"matrix": [6, 0], "x": 0, "y": 4, "w": 1.25},
+        {"matrix": [7, 0], "x": 1.25, "y": 4},
+        {"matrix": [6, 1], "x": 2.25, "y": 4},
+        {"matrix": [7, 2], "x": 3.25, "y": 4, "w": 6.25},
+        {"matrix": [6, 5], "x": 9.5, "y": 4, "w": 1.25},
+        {"matrix": [7, 5], "x": 10.75, "y": 4, "w": 1.25}
+      ]
+    }
+  }
+}

keyboards/0xcb/static/rules.mk

@@ -1,16 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no	        # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
-ENCODER_ENABLE = yes
-LTO_ENABLE = yes
-OLED_ENABLE = yes

keyboards/0xcb/tutelpad/info.json

@@ -1,57 +0,0 @@
-{
-    "keyboard_name": "TutelPad",
-    "manufacturer": "ItsFiremanSam",
-    "url": "",
-    "maintainer": "ItsFiremanSam",
-    "usb": {
-        "vid": "0xCB00",
-        "pid": "0xF09F",
-        "device_version": "0.0.1"
-    },
-    "bootmagic": {
-        "matrix": [1, 0]
-    },
-    "rgblight": {
-        "hue_steps": 10,
-        "led_count": 4,
-        "sleep": true,
-        "animations": {
-            "breathing": true,
-            "rainbow_mood": true,
-            "rainbow_swirl": true,
-            "snake": true,
-            "knight": true,
-            "christmas": true,
-            "static_gradient": true,
-            "rgb_test": true,
-            "alternating": true,
-            "twinkle": true
-        }
-    },
-    "ws2812": {
-        "pin": "D3"
-    },
-    "processor": "atmega32u4",
-    "bootloader": "caterina",
-    "matrix_pins": {
-        "direct": [
-            ["E6", "D7", "B1", "B3"],
-            ["B5", "B4", "B2", "B6"]
-        ]
-    },
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                {"x": 0, "y": 0, "matrix": [0, 0]},
-                {"x": 1, "y": 0, "matrix": [0, 1]},
-                {"x": 2, "y": 0, "matrix": [0, 2]},
-                {"x": 3, "y": 0, "matrix": [0, 3]},
-
-                {"x": 0, "y": 1, "matrix": [1, 0]},
-                {"x": 1, "y": 1, "matrix": [1, 1]},
-                {"x": 2, "y": 1, "matrix": [1, 2]},
-                {"x": 3, "y": 1, "matrix": [1, 3]}
-            ]
-        }
-    }
-}

keyboards/0xcb/tutelpad/keyboard.json

@@ -0,0 +1,67 @@
+{
+    "keyboard_name": "TutelPad",
+    "manufacturer": "ItsFiremanSam",
+    "url": "",
+    "maintainer": "ItsFiremanSam",
+    "usb": {
+        "vid": "0xCB00",
+        "pid": "0xF09F",
+        "device_version": "0.0.1"
+    },
+    "bootmagic": {
+        "matrix": [1, 0]
+    },
+    "rgblight": {
+        "hue_steps": 10,
+        "led_count": 4,
+        "sleep": true,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "snake": true,
+            "knight": true,
+            "christmas": true,
+            "static_gradient": true,
+            "rgb_test": true,
+            "alternating": true,
+            "twinkle": true
+        }
+    },
+    "ws2812": {
+        "pin": "D3"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": false,
+        "nkro": false,
+        "oled": true,
+        "rgblight": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["E6", "D7", "B1", "B3"],
+            ["B5", "B4", "B2", "B6"]
+        ]
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x": 0, "y": 0, "matrix": [0, 0]},
+                {"x": 1, "y": 0, "matrix": [0, 1]},
+                {"x": 2, "y": 0, "matrix": [0, 2]},
+                {"x": 3, "y": 0, "matrix": [0, 3]},
+
+                {"x": 0, "y": 1, "matrix": [1, 0]},
+                {"x": 1, "y": 1, "matrix": [1, 1]},
+                {"x": 2, "y": 1, "matrix": [1, 2]},
+                {"x": 3, "y": 1, "matrix": [1, 3]}
+            ]
+        }
+    }
+}

keyboards/0xcb/tutelpad/rules.mk

@@ -1,13 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration 
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-OLED_ENABLE = yes

keyboards/10bleoledhub/info.json

@@ -1,63 +0,0 @@
-{
-    "keyboard_name": "10bleoledhub",
-    "manufacturer": "haierwangwei2005",
-    "url": "https://github.com/haierwangwei2005/10BLE-OLED-HUB",
-    "maintainer": "haierwangwei2005",
-    "usb": {
-        "vid": "0x7C88",
-        "pid": "0x7C99",
-        "device_version": "0.0.1"
-    },
-    "bluetooth": {
-        "driver": "bluefruit_le"
-    },
-    "rgblight": {
-        "led_count": 4,
-        "animations": {
-            "breathing": true,
-            "rainbow_mood": true,
-            "rainbow_swirl": true,
-            "snake": true,
-            "knight": true,
-            "christmas": true,
-            "static_gradient": true,
-            "rgb_test": true,
-            "alternating": true,
-            "twinkle": true
-        }
-    },
-    "ws2812": {
-        "pin": "B7"
-    },
-    "matrix_pins": {
-        "cols": ["D6", "D7", "B5"],
-        "rows": ["F0", "F5", "F4", "F6"]
-    },
-    "diode_direction": "ROW2COL",
-    "encoder": {
-        "rotary": [
-            {"pin_a": "C7", "pin_b": "F7"}
-        ]
-    },
-    "processor": "atmega32u4",
-    "bootloader": "caterina",
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                {"matrix": [0, 0], "x": 0, "y": 0, "w": 0.8, "h": 0.8},
-
-                {"matrix": [1, 0], "x": 0, "y": 1},
-                {"matrix": [1, 1], "x": 1, "y": 1},
-                {"matrix": [1, 2], "x": 2, "y": 1},
-
-                {"matrix": [2, 0], "x": 0, "y": 2},
-                {"matrix": [2, 1], "x": 1, "y": 2},
-                {"matrix": [2, 2], "x": 2, "y": 2},
-
-                {"matrix": [3, 0], "x": 0, "y": 3},
-                {"matrix": [3, 1], "x": 1, "y": 3},
-                {"matrix": [3, 2], "x": 2, "y": 3}
-            ]
-        }
-    }
-}

keyboards/10bleoledhub/keyboard.json

@@ -0,0 +1,72 @@
+{
+    "keyboard_name": "10bleoledhub",
+    "manufacturer": "haierwangwei2005",
+    "url": "https://github.com/haierwangwei2005/10BLE-OLED-HUB",
+    "maintainer": "haierwangwei2005",
+    "usb": {
+        "vid": "0x7C88",
+        "pid": "0x7C99",
+        "device_version": "0.0.1"
+    },
+    "features": {
+        "bluetooth": true,
+        "bootmagic": true,
+        "encoder": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": false,
+        "oled": true
+    },
+    "bluetooth": {
+        "driver": "bluefruit_le"
+    },
+    "rgblight": {
+        "led_count": 4,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "snake": true,
+            "knight": true,
+            "christmas": true,
+            "static_gradient": true,
+            "rgb_test": true,
+            "alternating": true,
+            "twinkle": true
+        }
+    },
+    "ws2812": {
+        "pin": "B7"
+    },
+    "matrix_pins": {
+        "cols": ["D6", "D7", "B5"],
+        "rows": ["F0", "F5", "F4", "F6"]
+    },
+    "diode_direction": "ROW2COL",
+    "encoder": {
+        "rotary": [
+            {"pin_a": "C7", "pin_b": "F7"}
+        ]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0, "w": 0.8, "h": 0.8},
+
+                {"matrix": [1, 0], "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1, "y": 1},
+                {"matrix": [1, 2], "x": 2, "y": 1},
+
+                {"matrix": [2, 0], "x": 0, "y": 2},
+                {"matrix": [2, 1], "x": 1, "y": 2},
+                {"matrix": [2, 2], "x": 2, "y": 2},
+
+                {"matrix": [3, 0], "x": 0, "y": 3},
+                {"matrix": [3, 1], "x": 1, "y": 3},
+                {"matrix": [3, 2], "x": 2, "y": 3}
+            ]
+        }
+    }
+}

keyboards/10bleoledhub/rules.mk

@@ -1,18 +1,2 @@
 # Processor frequency
 F_CPU = 8000000
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-BLUETOOTH_ENABLE = yes
-OLED_ENABLE = yes
-ENCODER_ENABLE = yes

keyboards/1k/info.json

@@ -1,29 +0,0 @@
-{
-  "keyboard_name": "1K",
-  "manufacturer": "MakotoKurauchi",
-  "url": "",
-  "maintainer": "MakotoKurauchi",
-  "usb": {
-    "vid": "0x0009",
-    "pid": "0x0001",
-    "device_version": "0.0.1"
-  },
-  "rgblight": {
-    "led_count": 1
-  },
-  "ws2812": {
-    "pin": "B2"
-  },
-  "matrix_pins": {
-    "direct": [
-      ["B0"]
-    ]
-  },
-  "layouts": {
-    "LAYOUT_ortho_1x1": {
-      "layout": [
-        {"x": 0, "y": 0, "matrix": [0, 0]}
-      ]
-    }
-  }
-}

keyboards/1k/keyboard.json

@@ -0,0 +1,39 @@
+{
+  "keyboard_name": "1K",
+  "manufacturer": "MakotoKurauchi",
+  "url": "",
+  "maintainer": "MakotoKurauchi",
+  "usb": {
+    "vid": "0x0009",
+    "pid": "0x0001",
+    "device_version": "0.0.1"
+  },
+  "processor": "attiny85",
+  "bootloader": "custom",
+  "build": {
+    "lto": true
+  },
+  "features": {
+    "grave_esc": false,
+    "magic": false,
+    "space_cadet": false
+  },
+  "rgblight": {
+    "led_count": 1
+  },
+  "ws2812": {
+    "pin": "B2"
+  },
+  "matrix_pins": {
+    "direct": [
+      ["B0"]
+    ]
+  },
+  "layouts": {
+    "LAYOUT_ortho_1x1": {
+      "layout": [
+        {"x": 0, "y": 0, "matrix": [0, 0]}
+      ]
+    }
+  }
+}

keyboards/1k/keymaps/default/keymap.c

@@ -21,5 +21,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 }
 
 void keyboard_post_init_user(void) {
+  rgblite_init();
   rgblite_increase_hue();
 }

keyboards/1k/keymaps/default/rgblite.h

@@ -6,6 +6,10 @@
 #include "ws2812.h"
 #include "color.h"
 
+static inline void rgblite_init(void) {
+    ws2812_init();
+}
+
 static inline void rgblite_setrgb(RGB rgb) {
     rgb_led_t leds[RGBLIGHT_LED_COUNT] = {{.r = rgb.r, .g = rgb.g, .b = rgb.b}};
     ws2812_setleds(leds, RGBLIGHT_LED_COUNT);

keyboards/1k/rules.mk

@@ -1,26 +1,2 @@
-# MCU name
-MCU = attiny85
-
-# Bootloader selection
-BOOTLOADER = custom
 BOOTLOADER_SIZE = 1862
 PROGRAM_CMD = micronucleus --run $(BUILD_DIR)/$(TARGET).hex
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = no        # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
-# Save as much space as we can...
-LTO_ENABLE = yes
-GRAVE_ESC_ENABLE = no
-MAGIC_ENABLE = no
-SPACE_CADET_ENABLE = no

keyboards/1upkeyboards/1up60hse/config.h

@@ -1,39 +0,0 @@
-/*
-Copyright 2018 MechMerlin
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT