I found a typo!

* Add files via upload

* Update readme.md

* Update readme.md

* Update readme.md

* Add files via upload

* Delete config.h

* Delete rules.mk

* Add files via upload

* Update config.h

* revised config files

* revised readme

* Update readme.md

* Update readme.md

docs/config_options.md

@@ -27,7 +27,9 @@ This level contains all of the options for that particular keymap. If you wish t
 
 # The `config.h` file
 
-This is a C header file that is one of the first things included, and will persist over the whole project (if included). Lots of variables can be set here and accessed elsewhere.
+This is a C header file that is one of the first things included, and will persist over the whole project (if included). Lots of variables can be set here and accessed elsewhere. The `config.h` file shouldn't be including other `config.h` files, or anything besides this:
+
+    #include "config_common.h"
 
 ## `config.h` Options
 
@@ -123,6 +125,15 @@ If you define these options you will enable the associated feature, which may in
   * how many taps before oneshot toggle is triggered
 * `#define IGNORE_MOD_TAP_INTERRUPT`
   * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold
+* `#define QMK_KEYS_PER_SCAN 4`
+  * Allows sending more than one key per scan. By default, only one key event gets
+    sent via `process_record()` per scan. This has little impact on most typing, but
+    if you're doing a lot of chords, or your scan rate is slow to begin with, you can
+    have some delay in processing key events. Each press and release is a separate
+    event. For a keyboard with 1ms or so scan times, even a very fast typist isn't
+    going to produce the 500 keystrokes a second needed to actually get more than a
+    few ms of delay from this. But if you're doing chording on something with 3-4ms
+    scan times? You probably want this.
 
 ### RGB Light Configuration
 
@@ -170,7 +181,13 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
 * `ARCH = AVR8`
 * `F_USB = $(F_CPU)`
 * `OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT`
-* `OPT_DEFS += -DBOOTLOADER_SIZE=4096`
+* `BOOTLOADER = atmel-dfu` with the following options:
+  * `atmel-dfu`
+  * `lufa-dfu`
+  * `qmk-dfu`
+  * `halfkay`
+  * `caterina`
+  * `bootloadHID`
 
 ### Feature Options
 

docs/feature_layouts.md

@@ -55,10 +55,6 @@ Instead of using `#include "planck.h"`, you can use this line to include whateve
 
     #include QMK_KEYBOARD_H
 
-In your config.h, you can also use this variable to include the keyboard's `config.h`:
-
-    #include QMK_KEYBOARD_CONFIG_H
-
 If you want to keep some keyboard-specific code, you can use these variables to escape it with an `#ifdef` statement:
 
 * `KEYBOARD_<folder1>_<folder2>`
@@ -73,4 +69,4 @@ For example:
 #endif
 ```
 
-Note that the names are lowercase and match the folder/file names for the keyboard/revision exactly.
+Note that the names are lowercase and match the folder/file names for the keyboard/revision exactly.

docs/feature_macros.md

@@ -96,6 +96,7 @@ There's also a couple of mod shortcuts you can use:
 * `SS_LCTRL(string)`
 * `SS_LGUI(string)`
 * `SS_LALT(string)`
+* `SS_LSFT(string)`
 
 These press the respective modifier, send the supplied string and then release the modifier.
 They can be used like this:

keyboards/daisy/config.h

@@ -0,0 +1,175 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x1209
+#define PRODUCT_ID      0x2328
+#define DEVICE_VER      0x501
+#define MANUFACTURER    K.T.E.C.
+#define PRODUCT         Daisy
+#define DESCRIPTION     qmk port for Daisy
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D2, D3, D5, B7 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+ 
+#define BACKLIGHT_PIN D0
+#define BACKLIGHT_LEVELS 6
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+// ws2812 options
+#define RGB_DI_PIN C7 // pin the DI on the ws2812 is hooked-up to
+#define RGBLIGHT_ANIMATIONS // run RGB animations
+#define RGBLED_NUM 8 // number of LEDs
+#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
+#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
+#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif

keyboards/daisy/daisy.c

@@ -0,0 +1,15 @@
+#include "daisy.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRC  |=  (1<<PC6);
+        PORTC &= ~(1<<PC6);
+    } else {
+        // Hi-Z
+        DDRC  &= ~(1<<PC6);
+        PORTC &= ~(1<<PC6);
+  }
+	led_set_user(usb_led);
+}

keyboards/daisy/daisy.h

@@ -0,0 +1,19 @@
+#ifndef DAISY_H
+#define DAISY_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \
+	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \
+	K30, K31, K32, K34, K35, K37, K38, K39 \
+) \
+{ \
+	{ K00, K01, K02, K03,   K04, K05, K06,   K07, K08, K09, K0A }, \
+	{ K10, K11, K12, K13,   K14, K15, K16,   K17, K18, K19, K1A }, \
+	{ K20, K21, K22, K23,   K24, K25, K26,   K27, K28, K29, K2A }, \
+	{ K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, K38, K39, K3A }  \
+}
+
+#endif

keyboards/daisy/keymaps/default/keymap.c

@@ -0,0 +1,99 @@
+	#include "daisy.h"
+#include "action_layer.h"
+
+extern keymap_config_t keymap_config;
+
+// Layer shorthand
+#define _BL 0
+#define _LW 1
+#define _RS 2
+
+enum layer_keycodes {
+	QWERTY = SAFE_RANGE, LOWER, RAISE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Base Layer
+ * .-----------------------------------------------------------------------.
+ * | ESC | Q   | W   | E   | R   | T   | Y   | U   | I   | O   | P   | \|  |
+ * |-----------------------------------------------------------------------|
+ * | TAB   | A   | S   | D   | F   | G   | H   | J   | K   | L   | ENTER   |
+ * |-----------------------------------------------------------------------|
+ * | LSHIFT | Z   | X    | C   | V   | B   | N   | M   | ,<  | .>  | /?    |
+ * |-----------------------------------------------------------------------|
+ * | LCTRL | LGUI | LALT | SPACE   | BACKSPACE      | LW     | RS  | RALT  |
+ * '-----------------------------------------------------------------------'
+ */
+
+	[_BL] = KEYMAP(
+  GRAVE_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,     KC_Y,     KC_U,   KC_I,    KC_O,    KC_P,    KC_BSLS,
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,     KC_H,     KC_J,   KC_K,    KC_L,    KC_ENT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,     KC_N,     KC_M,   KC_COMM, KC_DOT,  KC_SLSH,
+  KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_BSPC, LOWER, RAISE, KC_RALT ),
+ 
+
+/* Function Layer
+ * .-----------------------------------------------------------------------.
+ * | GRV | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -_  |
+ * |-----------------------------------------------------------------------|
+ * |       | =+  | UP  |     |     |     | [{  | ]}  | ;:  | '"  |         |
+ * |-----------------------------------------------------------------------|
+ * |        | LEFT| DOWN |RIGHT|     |     |     |     |     |     |       |
+ * |-----------------------------------------------------------------------|
+ * |       |      |      |         | DELETE         |        |     |       |
+ * '-----------------------------------------------------------------------'
+ */
+ 
+	[_LW] = KEYMAP(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+  KC_TRNS, KC_EQL,  KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, KC_TRNS,
+  KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_DEL,  KC_TRNS, KC_TRNS, KC_TRNS ),
+ 
+ 
+ /* Second Function Layer
+ * .-----------------------------------------------------------------------.
+ * | RST | F1  | F2  | F3  | F4  | F5  | F6  |     | HOME| PGUP|     |     |
+ * |-----------------------------------------------------------------------|
+ * |      | F7  | F8  | F9  | F10 | F11 | F12 |     | END | PGDN|          |
+ * |-----------------------------------------------------------------------|
+ * |       |RGBtog|RGBmod|RGBhud|RGBhui|RGBvad|RGBvai|RGBsad|RGBsai|BL|    |
+ * |-----------------------------------------------------------------------|
+ * |       |      |      |         |                |        |     |       |
+ * '-----------------------------------------------------------------------'
+ */
+ 
+	[_RS] = KEYMAP(
+  RESET,   KC_F1,   KC_F2,    KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_TRNS, KC_HOME, KC_PGUP,  KC_TRNS,  KC_TRNS,
+  KC_TRNS, KC_F7,   KC_F8,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_END,  KC_PGDN,  KC_TRNS,
+  KC_TRNS, RGB_TOG, RGB_SMOD, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP,  KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ),
+ 
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	switch (keycode) {
+		case LOWER:
+		  if(record->event.pressed){
+			   layer_on(_LW);
+		  } else {
+			  layer_off(_LW);
+		  }
+		  return false;
+		  break;
+		  case RAISE:
+		  if(record->event.pressed){
+			   layer_on(_RS);
+		  } else {
+			  layer_off(_RS);
+		  }
+		  return false;
+		  break;
+	}
+  return true;
+};

keyboards/daisy/keymaps/default/readme.md

@@ -0,0 +1,5 @@
+![Daisy Layout Image](https://imgur.com/9mSF0yf)
+
+# Default Daisy Layout
+
+This is the default layout as offered by KPRepublic's TMK firmware for the Daisy with a few minor tweaks for usability made by me.

keyboards/daisy/readme.md

@@ -0,0 +1,29 @@
+# Daisy
+
+A 40% keyboard kit sold by KPRepublic.
+
+Keyboard Maintainer: westfoxtrot (https://github.com/westfoxtrot)  
+Hardware Supported: Daisy PCB Rev.1, Daisy PCB Rev.2  
+Hardware Availability: http://tinyurl.com/yc26lq22
+
+Make example for this keyboard (after setting up your build environment):
+
+    make daisy:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+
+# Other Keymaps
+
+The "default" keymap included is the layout I personally use on the Daisy and the one I have found the most comfortable.
+
+A printable picture showing this layout is available here: https://imgur.com/9mSF0yf
+
+
+```
+$ make daisy:[default|<name>]
+```
+
+# Bootloader
+
+I personally had issues with the bootloader on my Daisy PCB and was unable to flash a firmware to the board after the first time. I replaced the bootloader with the one available in the repository at ../../util/bootloader_atmega32u4_1_0_0.hex

keyboards/daisy/rules.mk

@@ -0,0 +1,66 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4996
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/ergodox_ez/readme.md

@@ -31,3 +31,8 @@ To flash with ´teensy-loader-cli´:
 
   - Press the Reset button by inserting a paperclip gently into the reset hole
     in the top right corder.
+
+## Settings
+
+You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively
+slow scan rate.

keyboards/handwired/maartenwut/config.h

@@ -0,0 +1,45 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xBB80
+#define PRODUCT_ID      0x050D
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Maartenwut
+#define PRODUCT         Ortho
+#define DESCRIPTION     Handwired ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F0, F1, F4, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define QMK_ESC_OUTPUT C6 // usually COL
+#define QMK_ESC_INPUT D0 // usually ROW
+
+#endif

keyboards/handwired/maartenwut/keymaps/default/keymap.c

@@ -0,0 +1,46 @@
+#include "maartenwut.h"
+
+#define _MA 0
+#define _NU 1
+#define _FL 2
+#define _GA 3
+#define _AR 4
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define LSHIFT OSM(MOD_LSFT)
+#define SPACE LT(_AR, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP(
+    KC_GRV,		KC_1,		KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,	KC_EQL,		KC_BSPC,
+    KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_LBRC,	KC_RBRC,	KC_BSLS,
+    KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,	KC_QUOT,	KC_DEL,		KC_ENT,
+    LSHIFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT,	KC_UP,		KC_PSCR,
+    KC_LCTL,	KC_LGUI,	KC_LALT,	MO(_NU),				SPACE,					KC_SPC,					MO(_FL),	KC_RALT,	KC_LEFT,	KC_DOWN,	KC_RGHT),
+[_NU] = KEYMAP(
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	KC_7,		KC_8,		KC_9,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    KC_CAPS,	KC_4,		KC_5,		KC_6,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	KC_1,		KC_2,		KC_3,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	KC_0,		_______,	_______,				_______,				_______,				_______,	_______,	_______,	_______,	_______),
+[_FL] = KEYMAP(
+    _______,	KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		KC_MPLY,
+    RESET,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	TG(_GA),	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,				_______,				_______,				_______,	_______,	_______,	_______,	_______),
+[_GA] = KEYMAP(
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    KC_LSFT,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,				KC_SPC,					_______,				_______,	_______,	_______,	_______,	_______),
+[_AR] = KEYMAP(
+    _______,	KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,				_______,				_______,				_______,	_______,	_______,	_______,	_______)
+};

keyboards/handwired/maartenwut/maartenwut.c

@@ -0,0 +1,13 @@
+#include "maartenwut.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};

keyboards/handwired/maartenwut/maartenwut.h

@@ -0,0 +1,23 @@
+#ifndef MAARTENWUT_H
+#define MAARTENWUT_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define KEYMAP( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+  k40, k41, k42, k43,      k45,      k47,      k49, k4a, k4b, k4c, k4d \
+) \
+{ \
+  {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+  {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+  {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+  {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+  {k40, k41, k42, k43, XXX, k45, XXX, k47, XXX, k49, k4a, k4b, k4c, k4d} \
+}
+
+#endif

keyboards/handwired/maartenwut/rules.mk

@@ -0,0 +1,67 @@
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

keyboards/kona_classic/keymaps/ansi_arrows_lcap/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/kona_classic/keymaps/ansi_arrows_lcap/keymap.c

@@ -0,0 +1,98 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "kona_classic.h"
+
+#define MODS_SHFT_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI))
+#define MODS_GUI_MASK   (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI))
+
+// Helpful defines
+#define ______ KC_TRNS
+#define XXXXXX KC_NO
+
+#define _DEFAULT 0
+#define _FN 1
+
+//RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_DEFAULT] = KEYMAP(
+		KC_F1, KC_F2,  F(0),	KC_1,    KC_2,     KC_3,   KC_4,    KC_5,    KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+		KC_F3, KC_F4,  KC_TAB,	KC_Q,    KC_W,     KC_E,   KC_R,    KC_T,    KC_Y,    KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+		KC_F5, KC_F6,  KC_LCAP, KC_A,    KC_S,     KC_D,   KC_F,    KC_G,    KC_H,    KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  ______, \
+		KC_F7, KC_F8,  KC_LSFT, ______,  KC_Z,     KC_X,   KC_C,    KC_V,    KC_B,    KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   MO(_FN), \
+		KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT,  ______,          KC_SPC, ______,                    KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+	),
+	[_FN] = KEYMAP(
+		RGB_TOG, RGB_MOD, KC_TILD, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET, \
+		______,  ______,  ______,  ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+		RGB_HUI, RGB_HUD, ______,  ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+		RGB_SAI, RGB_SAD, ______,  ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+		RGB_VAI, RGB_VAD, ______,  ______, ______, ______,         ______, ______,                 ______, ______, ______, ______, ______
+	)
+};
+
+// const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
+
+enum function_id {
+    ESCAPE,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(ESCAPE),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case ESCAPE:
+      shift_esc_shift_mask = get_mods()&MODS_SHFT_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk

@@ -0,0 +1,37 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/planck/keymaps/brandon/config.h

@@ -1,68 +1,30 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+ * MIDI options
+ */
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
 */
+#define MIDI_BASIC
 
-#ifndef CONFIG_H
-#define CONFIG_H
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
 
-#define TAPPING_TERM 200
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define MANUFACTURER    Ortholinear Keyboards
-#define PRODUCT         The Planck Keyboard
-#define DESCRIPTION     A compact ortholinear keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D0, D5, B5, B6 }
-#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
-#define UNUSED_PINS
-
-#define AUDIO_VOICES
-
-#define BACKLIGHT_PIN B7
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
 
 #define MOUSEKEY_INTERVAL       20
 #define MOUSEKEY_DELAY          0
@@ -70,29 +32,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_MAX_SPEED      7
 #define MOUSEKEY_WHEEL_DELAY 0
 
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#ifdef SUBPROJECT_rev3
-    #include "rev3/config.h"
-#endif
-#ifdef SUBPROJECT_rev4
-    #include "rev4/config.h"
-#endif
-
 #endif

keyboards/planck/keymaps/circuit/config.h

@@ -1,91 +1,29 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* Tap-dance interval definition */
-#define TAPPING_TERM 200
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define MANUFACTURER    Ortholinear Keyboards
-#define PRODUCT         The Planck Keyboard
-#define DESCRIPTION     A compact ortholinear keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D0, D5, B5, B6 }
-#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B7
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
+#include "../../config.h"
 
 /*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
+ * MIDI options
  */
 
-/* disable debug print */
-//#define NO_DEBUG
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
 
-/* disable print */
-//#define NO_PRINT
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+#define MIDI_BASIC
 
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
 
-#ifdef SUBPROJECT_rev3
-    #include "rev3/config.h"
-#endif
-#ifdef SUBPROJECT_rev4
-    #include "rev4/config.h"
-#endif
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
 
-#endif
+#endif

keyboards/planck/keymaps/default/keymap.c

@@ -163,9 +163,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_ADJUST] = {
-  {_______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL },
+  {_______, RESET,   DEBUG,    RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL },
   {_______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
-  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
 }
 
@@ -261,4 +261,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       break;
   }
   return true;
-}
+}

keyboards/planck/keymaps/dr0ck/config.h

@@ -0,0 +1,42 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+                                
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#endif

keyboards/planck/keymaps/dr0ck/keymap.c

@@ -0,0 +1,288 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "planck.h"
+#include "action_layer.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST,
+  _FUNCTION
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV,
+  FUNCTION
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Func |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  ‘   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Alt  | GUI  | Esc  |Lower |Enter |Space |Raise | Func | Alt  |Prt Sc| Ctrl |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {FUNCTION,KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
+  {KC_LCTL, KC_LALT, KC_LGUI, KC_ESC, LOWER,   KC_ENT,  KC_SPC,  RAISE,   FUNCTION, KC_RALT,KC_PSCR, KC_RCTL}
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Func |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Esc  | Alt  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  {FUNCTION,KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {KC_LCTL, KC_LGUI, KC_ESC,  KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Func |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Esc  | Alt  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
+  {FUNCTION,KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
+  {KC_LCTL, KC_LGUI, KC_ESC,  KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Home |Pg Up |Pg Dn | End  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_DEL },
+  {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______,    KC_HOME,    KC_PGUP, KC_PGDN, KC_END}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Home |Pg Up |Pg Dn | End  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL },
+  {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_PGDN, KC_END}
+},
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = {
+  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
+  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
+  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Caps |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   DEBUG,   _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL },
+  {_______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {KC_CAPS, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+},
+
+/* Function
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |      | Prev | Play | Next |  F5  |      |Pg Up |  Up  |Pg Dn |Prt Sc| Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      | Mute | Vol- | Vol+ |      |      | Home | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|      |      |      |      |      |  End |      |      |      |      | Shift|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |      |      |      |      |Enter |Space |      |      |      |      | Ctrl |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = {
+  {KC_ESC , _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_F5, _______, KC_PGUP, KC_UP,   KC_PGDN, KC_PSCR, KC_DEL},
+  {_______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______},
+  {KC_LSFT, _______, _______, _______, _______, _______, KC_END , _______, _______, _______, _______, KC_RSFT},
+  {KC_LCTL, _______, _______, _______, KC_ENT,  KC_SPC, _______, _______, _______, _______, _______, KC_RCTL}
+}
+
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false; 
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(plover_song);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+    case FUNCTION:
+      if (record->event.pressed) {
+        layer_on(_FUNCTION);
+      } else {
+        layer_off(_FUNCTION);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/planck/keymaps/dr0ck/readme.md

@@ -0,0 +1,15 @@
+This layout adds a new function layer similar to the default one from the pok3r:
+
+    /* Function
+     * ,-----------------------------------------------------------------------------------.
+     * | Esc  |      | Prev | Play | Next |      |      |Pg Up |  Up  |Pg Dn |Prt Sc| Del  |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * |      |      | Vol- | Mute | Vol+ |      | Home | Left | Down |Right | End  |      |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      |      |      |      |      |      |      |      |      |      |      |      |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * |      |      |      |      |      |             |      | Home |Pg Up |Pg Dn | End  |
+     * `-----------------------------------------------------------------------------------'
+     */
+
+You can acces this layer by holding the first key on the second line from the top.

keyboards/planck/keymaps/khord/config.h

@@ -1,7 +1,7 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
+#include "config_common.h"
 
 #ifdef AUDIO_ENABLE
     #define STARTUP_SONG SONG(SONIC_RING)

keyboards/planck/keymaps/myoung34/config.h

@@ -0,0 +1,48 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define WORKMAN_SOUND COLEMAK_SOUND
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+// #define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#define RGB_DI_PIN B2     // The pin the LED strip is connected to (PB2 by default)
+#define RGBLED_NUM 3      // Number of LEDs in your strip
+#define RGBLIGHT_ANIMATIONS
+
+#endif

keyboards/planck/keymaps/myoung34/keymap.c

@@ -0,0 +1,142 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "planck.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "backlight.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  BACKLIT
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------------------------------------------------.
+   * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |Enter |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  '   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      | Ctrl | GUI  | Alt  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_QWERTY] = {
+    {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC       },
+    {KC_LCTRL,KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, RSFT_T(KC_ENT)},
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT       },
+    {_______, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT       }
+  },
+
+  /* Lower
+   * ,-----------------------------------------------------------------------------------.
+   * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Tab  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * | BL   |      |      |      |      |             |      | Play | Vol- | Vol+ | Next |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_LOWER] = {
+    {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_DEL},
+    {KC_TAB,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE},
+    {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______},
+    {BL_TOGG, _______, _______, _______, _______, _______, _______, _______,    KC_MPLY,    KC_VOLD, KC_VOLU, KC_MNXT}
+  },
+
+  /* Raise
+   * ,-----------------------------------------------------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Tab  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * | BL   |      |      |      |      |             |      | Play | Vol- | Vol+ | Next |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_RAISE] = {
+    {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL },
+    {KC_TAB, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+    {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______},
+    {BL_TOGG, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLD, KC_VOLU, KC_MNXT}
+  },
+
+  /* Adjust (Lower + Raise)
+   * ,-----------------------------------------------------------------------------------.
+   * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |      |      |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |             |      |      |      |      |      |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_ADJUST] = {
+    {_______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL },
+    {_______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______, _______,  _______, _______},
+    {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  RGB_M_R, _______, _______, _______, _______},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+  }
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+   case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+  }
+  return true;
+}

keyboards/planck/keymaps/myoung34/readme.md

@@ -0,0 +1,19 @@
+# myoung34's Planck Layout
+
+A basic Planck layout with simultaneous backlight and audio support.
+
+## Features
+
+- Base Layers
+  - QWERTY
+  - Colemak
+- Audio
+- Backlight
+
+## Building and flashing
+
+1. Put your board in DFU mode with either the button on the bottom, or with a software key in your current firmware
+1. Flash:
+    ```bash
+    $ make planck/rev4:myoung34:dfu
+    ```

keyboards/planck/keymaps/myoung34/rules.mk

@@ -0,0 +1,11 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+
+AUDIO_ENABLE = yes         # Audio output on port C6
+CONSOLE_ENABLE = no        # Console for debug(+400)
+MIDI_ENABLE = no           # MIDI controls
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+NKRO_ENABLE = no           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BACKLIGHT_ENABLE = yes

keyboards/planck/keymaps/neo2planck/config.h

@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define PREVENT_STUCK_MODIFIERS
+
+#endif

keyboards/planck/keymaps/neo2planck/keymap.c

@@ -0,0 +1,120 @@
+#include "planck.h"
+#ifdef BACKLIGHT_ENABLE
+#include "backlight.h"
+#endif
+#include "keymap_german.h"
+
+// for intellisense, has to be commented for building
+/*
+#include "..\..\..\..\quantum\keymap_extras\keymap_german.h"
+#include "..\..\..\..\tmk_core\common\keycode.h"
+*/
+
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+/*
+This layout tries to emulate Neo2, and is intended to be used with a German QWERTZ softwarelayout.
+It has "üäöß" as it is optimized for a mix of German & English.
+The special character layer and the navigation & number block layer are designed to keep the fingers near the home row.
+*/
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* 
+,-----------------------------------------------------------------------------------.
+| Esc  |   X  |   V  |   L  |   C  |   W  |   K  |   H  |   G  |   F  |   Q  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Ent  |   U  |   I  |   A  |   E  |   O  |   S  |   N  |   R  |   T  |   D  |  Y   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+| Shift|   Ü  |   Ö  |   Ä  |   P  |   Z  |   B  |   M  |   ,  |   .  |   J  |Shift |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Ctrl | GUI  | Alt  |  M2  |  M1  |    Space    |  M1  |  M2  | Alt  |MRight| Ctrl |
+`-----------------------------------------------------------------------------------'
+*/
+
+[0] = {
+	{ KC_ESC,        DE_X,    DE_V,    DE_L,  DE_C,  DE_W,   DE_K,   DE_H,  DE_G,    DE_F,     DE_Q,     KC_BSPC      },
+	{ KC_ENT,        DE_U,    DE_I,    DE_A,  DE_E,  DE_O,   DE_S,   DE_N,  DE_R,    DE_T,     DE_D,     DE_Y         },
+	{ KC_LSFT,       DE_UE,   DE_OE,   DE_AE, DE_P,  DE_Z,   DE_B,   DE_M,  DE_COMM, DE_DOT,   DE_J,     KC_LSFT      },
+	{ KC_LCTL ,      KC_RGUI, KC_LALT, MO(2), MO(1), KC_SPC, KC_SPC, MO(1), MO(2),   KC_RALT,  KC_BTN2,  KC_RCTL      }
+},
+
+/* M1 
+ ,-----------------------------------------------------------------------------------.
+ |  Esc |      |   _  |   [  |   ]  |   ^  |   !  |   <  |   >  |   =  |   &  |  ß   |
+ |------+------+------+------+------+-------------+------+------+------+------+------|
+ |  Tab |   \  |   /  |   {  |   }  |   *  |   ?  |   (  |   )  |   -  |   :  |  @   | 
+ |------+------+------+------+------+------|------+------+------+------+------+------|
+ | Shift|   #  |   $  |   |  |   ~  |   `  |   +  |   %  |   "  |   '  |   ;  |Shift |
+ |------+------+------+------+------+------+------+------+------+------+------+------|
+ | Ctrl | GUI  | Alt  |  M2  |  M1  |    Space    |  M1  |  M2  | Alt  | Esc  | Ctrl |
+ `-----------------------------------------------------------------------------------'
+*/
+[1] = {
+	{ _______, _______, DE_UNDS, DE_LBRC, DE_RBRC, DE_CIRC, DE_EXLM, DE_LESS, DE_MORE, DE_EQL,  DE_AMPR, DE_SS   },
+	{ KC_TAB,  DE_BSLS, DE_SLSH, DE_LCBR, DE_RCBR, DE_ASTR, DE_QST,  DE_LPRN, DE_RPRN, DE_MINS, DE_COLN, DE_AT   },
+	{ _______, DE_HASH, DE_DLR,  DE_PIPE, DE_TILD, DE_ACUT, DE_PLUS, DE_PERC, DE_DQOT, DE_QUOT, DE_SCLN, _______ },
+	{ _______, _______, _______, MO(3),   _______, _______, _______, _______, MO(3),   _______, _______, _______ }
+},
+
+/* M2 Navigation & Number Blocks
+*  very easy to get used to & intuituve placement
+* ,-----------------------------------------------------------------------------------.
+* |      | PgUp | Bksp |  Up  |  DEL | PgDn |      |   7  |   8  |   9  |      | Ins  |
+* |------+------+------+------+------+-------------+------+------+------+------+------|
+* |  Tab | Home |  Lft | Down | Right| End  |      |   4  |   5  |   6  |   .  | Enter|
+* |------+------+------+------+------+------|------+------+------+------+------+------|
+* | Shift|      |  Tab |      | Enter|      |   0  |   1  |   2  |   3  |   ,  |Shift |
+* |------+------+------+------+------+------+------+------+------+------+------+------|
+* | Ctrl | GUI  | Alt  |  M2  |  M1  |    Space    |  M1  |  M2  | Alt  | Esc  | Ctrl |
+* `-----------------------------------------------------------------------------------'
+*/
+[2] = {
+	{ XXXXXXX, KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PGDN, XXXXXXX, DE_7,    DE_8,  DE_9,    XXXXXXX, KC_INS  },
+	{ KC_TAB,  KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  XXXXXXX, DE_4,    DE_5,  DE_6,    DE_DOT,  KC_ENT  },
+	{ _______, XXXXXXX, KC_TAB,  XXXXXXX, KC_ENT,  XXXXXXX, DE_0,    DE_1,    DE_2,  DE_3,    DE_COMM, _______ },
+	{ _______, _______, _______, _______, MO(3), _______, _______, MO(3), _______,  _______, _______, _______ }
+},
+
+/* M3 Function & Media Keys
+* ,-----------------------------------------------------------------------------------.
+* |      |      | Print|Scroll|Pause |      |      |  F7  |  F8  |  F9  |  F12 |      |
+* |------+------+------+------+------+-------------+------+------+------+------+------|
+* | Tab  |      | Mute | Vol- | Vol+ |      |   ³  |  F4  |  F5  |  F6  |  F11 | Enter|
+* |------+------+------+------+------+------|------+------+------+------+------+------|
+* | Shift|      | Prev | Play | Next |      |   ²  |  F1  |  F2  |  F3  |  F10 |Shift |
+* |------+------+------+------+------+------+------+------+------+------+------+------|
+* | Ctrl | GUI  | Alt  |  M2  |  M1  |    Space    |  M1  |  M2  | Alt  | Esc  | Ctrl |
+* `-----------------------------------------------------------------------------------'
+*/
+[3] = {
+	{ XXXXXXX, XXXXXXX, KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, KC_F7, KC_F8,    KC_F9,   KC_F12,  XXXXXXX },
+	{ KC_TAB,  XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, DE_SQ3,  KC_F4, KC_F5,    KC_F6,   KC_F11,  KC_ENT  },
+	{ _______, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, DE_SQ2,  KC_F1, KC_F2,    KC_F3,   KC_F10,  _______ },
+	{ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }
+},
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+	// MACRODOWN only works in this function
+	switch (id) {
+	case 0:
+		if (record->event.pressed) {
+			register_code(KC_RSFT);
+#ifdef BACKLIGHT_ENABLE
+			backlight_step();
+#endif
+		}
+		else {
+			unregister_code(KC_RSFT);
+		}
+		break;
+	}
+	return MACRO_NONE;
+};

keyboards/planck/keymaps/neo2planck/readme.md

@@ -0,0 +1,64 @@
+Neo2Planck
+=====================================
+
+This layout tries to emulate Neo2, and is intended to be used with a German QWERTZ softwarelayout.
+It has "üäöß" as it is optimized for a mix of German & English.
+The special character layer and the navigation & number block layer are designed to keep the fingers near the home row.
+
+This layout has some adaptations, due to the limited keys available: 
+* function-keys moved to the bottom row
+* press M1 + M2 to get to layer 3
+
+Neo2 wiki page: http://wiki.neo-layout.org/
+
+## Neo2 Base Layer
+```
+ ,-----------------------------------------------------------------------------------.
+ | Esc  |   X  |   V  |   L  |   C  |   W  |   K  |   H  |   G  |   F  |   Q  | Bksp |
+ |------+------+------+------+------+-------------+------+------+------+------+------|
+ | Ent  |   U  |   I  |   A  |   E  |   O  |   S  |   N  |   R  |   T  |   D  |  Y   |
+ |------+------+------+------+------+------|------+------+------+------+------+------|
+ | Shift|   Ü  |   Ö  |   Ä  |   P  |   Z  |   B  |   M  |   ,  |   .  |   J  |Shift |
+ |------+------+------+------+------+------+------+------+------+------+------+------|
+ | Ctrl | GUI  | Alt  |  M2  |  M1  |    Space    |  M1  |  M2  | Alt  |MRight| Ctrl |
+ `-----------------------------------------------------------------------------------'
+```
+
+# M1 Special Characters
+```
+ ,-----------------------------------------------------------------------------------.
+ |  Esc |      |   _  |   [  |   ]  |   ^  |   !  |   <  |   >  |   =  |   &  |  ß   |
+ |------+------+------+------+------+-------------+------+------+------+------+------|
+ |  Tab |   \  |   /  |   {  |   }  |   *  |   ?  |   (  |   )  |   -  |   :  |  @   | 
+ |------+------+------+------+------+------|------+------+------+------+------+------|
+ | Shift|   #  |   $  |   |  |   ~  |   `  |   +  |   %  |   "  |   '  |   ;  |Shift |
+ |------+------+------+------+------+------+------+------+------+------+------+------|
+ | Ctrl | GUI  | Alt  |  M2  |  M1  |    Space    |  M1  |  M2  | Alt  | Esc  | Ctrl |
+ `-----------------------------------------------------------------------------------'
+```
+
+## M2 Navigation & Number Blocks
+```
+ ,-----------------------------------------------------------------------------------.
+ |      | PgUp | Bksp |  Up  |  DEL | PgDn |      |   7  |   8  |   9  |      | Ins  |
+ |------+------+------+------+------+-------------+------+------+------+------+------|
+ |  Tab | Home |  Lft | Down | Right| End  |      |   4  |   5  |   6  |   .  | Enter|
+ |------+------+------+------+------+------|------+------+------+------+------+------|
+ | Shift|      |  Tab |      | Enter|      |   0  |   1  |   2  |   3  |   ,  |Shift |
+ |------+------+------+------+------+------+------+------+------+------+------+------|
+ | Ctrl | GUI  | Alt  |  M2  |  M1  |    Space    |  M1  |  M2  | Alt  | Esc  | Ctrl |
+ `-----------------------------------------------------------------------------------'
+```
+
+## M3 F-Keys and Media-Keys
+```
+ ,-----------------------------------------------------------------------------------.
+ |      |      | Print|Scroll|Pause |      |      |  F7  |  F8  |  F9  |  F12 |      |
+ |------+------+------+------+------+-------------+------+------+------+------+------|
+ | Tab  |      | Mute | Vol- | Vol+ |      |   ³  |  F4  |  F5  |  F6  |  F11 | Enter|
+ |------+------+------+------+------+------|------+------+------+------+------+------|
+ | Shift|      | Prev | Play | Next |      |   ²  |  F1  |  F2  |  F3  |  F10 |Shift |
+ |------+------+------+------+------+------+------+------+------+------+------+------|
+ | Ctrl | GUI  | Alt  |  M2  |  M1  |    Space    |  M1  |  M2  | Alt  | Esc  | Ctrl |
+ `-----------------------------------------------------------------------------------'
+```

keyboards/planck/keymaps/neo2planck/rules.mk

@@ -0,0 +1,23 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes 		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/planck/keymaps/pvc/config.h

@@ -29,31 +29,28 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
 #define UNUSED_PINS
 
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
+/*
+ * MIDI options
+ */
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
 
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+#define MIDI_BASIC
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
 
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -72,6 +69,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Only print user print statements */
 #define USER_PRINT
 
+#define BACKLIGHT_BREATHING
 
 /* disable action features */
 //#define NO_ACTION_LAYER
@@ -79,5 +77,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
 #endif

keyboards/planck/keymaps/vifon/config.h

@@ -1,82 +1,30 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define MANUFACTURER    Ortholinear Keyboards
-#define PRODUCT         The Planck Keyboard
-#define DESCRIPTION     A compact ortholinear keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D0, D5, B5, B6 }
-#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B7
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
+#include "../../config.h"
 
 /*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
+ * MIDI options
  */
 
-/* disable debug print */
-//#define NO_DEBUG
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
 
-/* disable print */
-//#define NO_PRINT
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+#define MIDI_BASIC
 
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
 
 /* prevent the modifiers from being stuck, sacrificing some memory */
 #define PREVENT_STUCK_MODIFIERS
@@ -86,11 +34,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define DYNAMIC_MACRO_SIZE 256
 
-#ifdef SUBPROJECT_rev3
-    #include "rev3/config.h"
-#endif
-#ifdef SUBPROJECT_rev4
-    #include "rev4/config.h"
-#endif
-
 #endif

keyboards/planck/keymaps/zach/config.h

@@ -1,55 +1,30 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+ * MIDI options
+ */
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
 */
+#define MIDI_BASIC
 
-#ifndef CONFIG_H
-#define CONFIG_H
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
 
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define MANUFACTURER    Ortholinear Keyboards
-#define PRODUCT         The Planck Keyboard
-#define DESCRIPTION     A compact ortholinear keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D0, D5, B5, B6 }
-#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B7
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-//#define BACKLIGHT_BREATHING     // LED breathing
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 5
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 //#define LOCKING_SUPPORT_ENABLE
@@ -84,11 +59,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define DYNAMIC_MACRO_ENABLE    // Enable if you need to use the macro functionality
 //#define SPACE_CADET             // Parenthesis on L/R shift
 
-#ifdef SUBPROJECT_rev3
-    #include "rev3/config.h"
-#endif
-#ifdef SUBPROJECT_rev4
-    #include "rev4/config.h"
-#endif
-
 #endif

keyboards/planck/light/config.h

@@ -0,0 +1,28 @@
+#ifndef LIGHT_CONFIG_H
+#define LIGHT_CONFIG_H
+
+#include "config_common.h"
+
+#undef PRODUCT
+#define PRODUCT Planck Light
+#undef PRODUCT_ID
+#define PRODUCT_ID 0x6065
+#define DEVICE_VER 0x0001
+
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+
+#define MATRIX_ROW_PINS { B0, E7, F0, F1 }
+#define MATRIX_COL_PINS { E6, E3, E4, D3, D4, D5, C0, A7, A6, E1, E0, D7 }
+
+#define C6_AUDIO
+#define B5_AUDIO
+
+#undef BACKLIGHT_PIN
+
+#define BACKLIGHT_PIN A5
+
+#define NO_USB_STARTUP_CHECK
+
+
+#endif

keyboards/planck/light/info.json

@@ -0,0 +1,7 @@
+{
+  "keyboard_name": "Planck Light",
+  "keyboard_folder": "planck/light",
+  "identifier": "FEED:6065:0001",
+  "processor": "at90usb1286",
+  "bootloader": "qmk-dfu",
+}

keyboards/planck/light/light.c

@@ -0,0 +1,39 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "light.h"
+
+void matrix_init_kb(void) {
+
+    // Turn status LED on
+    DDRD |= (1<<6);
+    PORTD |= (1<<6);
+
+    matrix_init_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record)
+{   
+    return process_record_user(keycode, record);
+}
+
+uint16_t backlight_task_counter = 0;
+
+void matrix_scan_kb(void)
+{
+    matrix_scan_user();
+}

keyboards/planck/light/light.h

@@ -0,0 +1,23 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef LIGHT_H
+#define LIGHT_H
+
+#include "planck.h"
+
+#endif

keyboards/planck/light/rules.mk

@@ -0,0 +1,9 @@
+MIDI_ENABLE = yes
+AUDIO_ENABLE = yes           # Audio output on port C6
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+
+OPT_DEFS += -DBOOTLOADER_SIZE=8192
+
+MCU = at90usb1286

keyboards/planck/planck.c

@@ -10,6 +10,7 @@ const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
 };
 #endif
 
+__attribute__ ((weak))
 void matrix_init_kb(void) {
 	// Turn status LED on
 	DDRE |= (1<<6);

keyboards/planck/rev3/rules.mk

@@ -1 +1,10 @@
-AUDIO_ENABLE = no           # Audio output on port C6
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+AUDIO_ENABLE = no           # Audio output on port C6

keyboards/planck/rev4/rules.mk

@@ -1 +1,9 @@
-AUDIO_ENABLE = yes           # Audio output on port C6
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+AUDIO_ENABLE = yes           # Audio output on port C6

keyboards/planck/rev5/rules.mk

@@ -1 +1,9 @@
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
 AUDIO_ENABLE = yes           # Audio output on port C6

keyboards/planck/rules.mk

@@ -37,15 +37,6 @@ F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically

keyboards/xd75/rules.mk

@@ -45,7 +45,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4996
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # QMK Build Options
 #   change to "no" to disable the options, or define them in the Makefile in 

quantum/audio/audio.c

@@ -184,6 +184,9 @@ void audio_init()
         #ifdef B5_AUDIO
             TCCR1A = (0 << COM1A1) | (0 << COM1A0) | (1 << WGM11) | (0 << WGM10);
             TCCR1B = (1 << WGM13)  | (1 << WGM12)  | (0 << CS12)  | (1 << CS11) | (0 << CS10);
+
+            TIMER_1_PERIOD = (uint16_t)(((float)F_CPU) / (440 * CPU_PRESCALER));
+            TIMER_1_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (440 * CPU_PRESCALER)) * note_timbre);
         #endif
 
         audio_initialized = true;
@@ -192,7 +195,7 @@ void audio_init()
     if (audio_config.enable) {
         PLAY_SONG(startup_song);
     }
-
+    
 }
 
 void stop_all_notes()

quantum/quantum.c

@@ -1105,8 +1105,6 @@ ISR(TIMER1_COMPA_vect)
 
 }
 
-
-
 #endif // breathing
 
 #else // backlight
@@ -1168,6 +1166,7 @@ void send_nibble(uint8_t number) {
 __attribute__((weak))
 uint16_t hex_to_keycode(uint8_t hex)
 {
+  hex = hex & 0xF;
   if (hex == 0x0) {
     return KC_0;
   } else if (hex < 0xA) {

quantum/quantum.h

@@ -124,6 +124,7 @@ extern uint32_t default_layer_state;
 #define SS_LCTRL(string) SS_DOWN(X_LCTRL) string SS_UP(X_LCTRL)
 #define SS_LGUI(string) SS_DOWN(X_LGUI) string SS_UP(X_LGUI)
 #define SS_LALT(string) SS_DOWN(X_LALT) string SS_UP(X_LALT)
+#define SS_LSFT(string) SS_DOWN(X_LSHIFT) string SS_UP(X_LSHIFT)
 
 #define SEND_STRING(str) send_string_P(PSTR(str))
 extern const bool ascii_to_shift_lut[0x80];

tmk_core/common/keyboard.c

@@ -165,7 +165,7 @@ void keyboard_init(void) {
 }
 
 /*
- * Do keyboard routine jobs: scan mantrix, light LEDs, ...
+ * Do keyboard routine jobs: scan matrix, light LEDs, ...
  * This is repeatedly called as fast as possible.
  */
 void keyboard_task(void)
@@ -177,6 +177,9 @@ void keyboard_task(void)
     static uint8_t led_status = 0;
     matrix_row_t matrix_row = 0;
     matrix_row_t matrix_change = 0;
+#ifdef QMK_KEYS_PER_SCAN
+    uint8_t keys_processed = 0;
+#endif
 
     matrix_scan();
     if (is_keyboard_master()) {
@@ -208,6 +211,10 @@ void keyboard_task(void)
                         });
                         // record a processed key
                         matrix_prev[r] ^= ((matrix_row_t)1<<c);
+#ifdef QMK_KEYS_PER_SCAN
+                        // only jump out if we have processed "enough" keys.
+                        if (++keys_processed >= QMK_KEYS_PER_SCAN)
+#endif
                         // process a key per task call
                         goto MATRIX_LOOP_END;
                     }
@@ -216,6 +223,10 @@ void keyboard_task(void)
         }
     }
     // call with pseudo tick event when no real key event.
+#ifdef QMK_KEYS_PER_SCAN
+    // we can get here with some keys processed now.
+    if (!keys_processed)
+#endif
     action_exec(TICK);
 
 MATRIX_LOOP_END:

util/travis_build.sh

@@ -1,36 +1,47 @@
 #!/bin/bash
 
+# test force push
+#TRAVIS_COMMIT_RANGE="c287f1bfc5c8...81f62atc4c1d"
+
 TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}"
 TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
+MAKE_ALL="make all:default AUTOGEN=\"true\""
 
 if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then 
 	exit_code=0
-	NEFM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/)'  | grep -Ev '^(docs/)' | wc -l)
-	BRANCH=$(git rev-parse --abbrev-ref HEAD)
-	if [ $NEFM -gt 0 -o "$BRANCH" = "master" ]; then
-		echo "Making all keymaps for all keyboards"
-		make all:default AUTOGEN="true"
+	git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE}
+	if [ $? -eq 128 ]; then
+		echo "Making default keymaps for all keyboards"
+		eval $MAKE_ALL
 		: $((exit_code = $exit_code + $?))
 	else
-		MKB=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards\/)([a-zA-Z0-9_\/]+)(?=\/)' | sort -u)
-		for KB in $MKB ; do
-			if [[ $KB == *keymaps* ]]; then
-				continue
-			fi
-			KEYMAP_ONLY=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/'${KB}'/keymaps/)' | wc -l)
-			if [[ $KEYMAP_ONLY -gt 0 ]]; then
-				echo "Making all keymaps for $KB"
-				make ${KB}:all AUTOGEN=true
-				: $((exit_code = $exit_code + $?))
-			else
-				MKM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards/'${KB}'/keymaps/)([a-zA-Z0-9_]+)(?=\/)' | sort -u)
-				for KM in $MKM ; do
-					echo "Making $KM for $KB"	
-					make ${KB}:${KM} AUTOGEN=true
+		NEFM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/)'  | grep -Ev '^(docs/)' | wc -l)
+		BRANCH=$(git rev-parse --abbrev-ref HEAD)
+		if [ $NEFM -gt 0 -o "$BRANCH" = "master" ]; then
+			echo "Making default keymaps for all keyboards"
+			eval $MAKE_ALL
+			: $((exit_code = $exit_code + $?))
+		else
+			MKB=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards\/)([a-zA-Z0-9_\/]+)(?=\/)' | sort -u)
+			for KB in $MKB ; do
+				if [[ $KB == *keymaps* ]]; then
+					continue
+				fi
+				KEYMAP_ONLY=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/'${KB}'/keymaps/)' | wc -l)
+				if [[ $KEYMAP_ONLY -gt 0 ]]; then
+					echo "Making all keymaps for $KB"
+					make ${KB}:all AUTOGEN=true
 					: $((exit_code = $exit_code + $?))
-				done		
-			fi
-		done
+				else
+					MKM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards/'${KB}'/keymaps/)([a-zA-Z0-9_]+)(?=\/)' | sort -u)
+					for KM in $MKM ; do
+						echo "Making $KM for $KB"	
+						make ${KB}:${KM} AUTOGEN=true
+						: $((exit_code = $exit_code + $?))
+					done		
+				fi
+			done
+		fi
 	fi
 	exit $exit_code
 fi