CTRL keyboard bootloader_jump support

Adds support for CTRL keyboards to enter bootloader via bootloader_jump()

common_features.mk

@@ -114,37 +114,35 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
+RGB_MATRIX_ENABLE ?= no
+VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
+ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
+ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
+    $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
+endif
     OPT_DEFS += -DRGB_MATRIX_ENABLE
-    OPT_DEFS += -DIS31FL3731
-    COMMON_VPATH += $(DRIVER_PATH)/issi
-    SRC += is31fl3731.c
-    SRC += i2c_master.c
     SRC += $(QUANTUM_DIR)/color.c
     SRC += $(QUANTUM_DIR)/rgb_matrix.c
+    SRC += $(QUANTUM_DIR)/rgb_matrix_drivers.c
     CIE1931_CURVE = yes
 endif
 
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
+	RGB_MATRIX_ENABLE = IS31FL3731
+endif
+
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
-    OPT_DEFS += -DRGB_MATRIX_ENABLE
     OPT_DEFS += -DIS31FL3731
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3731.c
     SRC += i2c_master.c
-    SRC += $(QUANTUM_DIR)/color.c
-    SRC += $(QUANTUM_DIR)/rgb_matrix.c
-    CIE1931_CURVE = yes
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
-    OPT_DEFS += -DRGB_MATRIX_ENABLE
     OPT_DEFS += -DIS31FL3733
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3733.c
     SRC += i2c_master.c
-    SRC += $(QUANTUM_DIR)/color.c
-    SRC += $(QUANTUM_DIR)/rgb_matrix.c
-    CIE1931_CURVE = yes
 endif
 
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)

docs/documentation_templates.md

@@ -36,7 +36,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make planck/rev4:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 ```
 
 There needs to be two spaces at the end of the `Keyboard Maintainer` and `Hardware Supported` lines for it to render correctly with Markdown.

docs/feature_userspace.md

@@ -5,15 +5,12 @@ If you use more than one keyboard with a similar keymap, you might see the benef
 * `/users/<name>/` (added to the path automatically)
   * `readme.md` (optional, recommended)
   * `rules.mk` (included automatically)
+  * `config.h` (included automatically)
   * `<name>.h` (optional)
   * `<name>.c` (optional)
-  * `config.h` (optional)
+  * `cool_rgb_stuff.c` (optional)
+  * `cool_rgb_stuff.h` (optional)
 
-`<name>.c` will need to be added to the SRC in `rules.mk` like this:
-
-    SRC += <name>.c
-
-Additional files may be added in the same way - it's recommended you have one named `<name>`.c/.h though.
 
 All this only happens when you build a keymap named `<name>`, like this:
 
@@ -23,82 +20,179 @@ For example,
 
     make planck:jack
 
-Will include the `/users/jack/` folder in the path, along with `/users/jack/rules.mk`.
+Will include the `/users/jack/` folder in the path, along with `/users/jack/rules.mk`.  
+
+!> This `name` can be [overridden](#override-default-userspace), if needed.  
+
+## `Rules.mk`
+
+The `rules.mk` is one of the two files that gets processed automatically.  This is how you add additional source files (such as  `<name>.c`) will be added when compiling.
+
+It's highly recommended that you use `<name>.c` as the default source file to be added. And to add it, you need to add it the SRC in `rules.mk` like this:
+
+    SRC += <name>.c
+
+Additional files may be added in the same way - it's recommended you have one named `<name>`.c/.h to start off with, though. 
+
+The `/users/<name>/rules.mk` file will be included in the build _after_ the `rules.mk` from your keymap. This allows you to have features in your userspace `rules.mk` that depend on individual QMK features that may or may not be available on a specific keyboard. 
+
+For example, if you have RGB control features shared between all your keyboards that support RGB lighting, you can add support for that if the RGBLIGHT feature is enabled:
+```make
+ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
+  # Include my fancy rgb functions source here
+  SRC += cool_rgb_stuff.c
+endif
+```
+
+Alternatively, you can `define RGB_ENABLE` in your keymap's `rules.mk` and then check for the variable in your userspace's `rules.mk` like this:
+```make
+ifdef RGB_ENABLE
+  # Include my fancy rgb functions source here
+  SRC += cool_rgb_stuff.c
+endif
+```
+
+### Override default userspace
+
+By default the userspace used will be the same as the keymap name. In some situations this isn't desirable. For instance, if you use the [layout](feature_layouts.md) feature you can't use the same name for different keymaps (e.g. ANSI and ISO). You can name your layouts `mylayout-ansi` and `mylayout-iso` and add the following line to your layout's `rules.mk`:
+
+```
+USER_NAME := mylayout
+```
+
+This is also useful if you have multiple different keyboards with different features physically present on the board (such as one with RGB Lights, and one with Audio, or different number of LEDs, or connected to a different PIN on the controller).
+
+## Configuration Options (`config.h`)
 
 Additionally, `config.h` here will be processed like the same file in your keymap folder.  This is handled separately from the `<name>.h` file.
 
 The reason for this, is that `<name>.h` won't be added in time to add settings (such as `#define TAPPING_TERM 100`), and including the `<name.h>` file in any `config.h` files will result in compile issues.
 
-So you should use the `config.h` for QMK settings, and the `<name>.h` file for user or keymap specific settings.
+!>You should use the `config.h` for [configuration options](config_options.md), and the `<name>.h` file for user or keymap specific settings (such as the enum for layer or keycodes)
 
-`/users/<name>/rules.mk` will be included in the build _after_ the `rules.mk` from your keymap. This allows you to have features in your userspace `rules.mk` that depend on individual QMK features that may or may not be available on a specific keyboard. For example, if you have RGB control features shared between all your keyboards that support RGB lighting, you can `define RGB_ENABLE` in your keymap `rules.mk` and then check for the variable in your userspace `rules.mk` like this:
-```make
-ifdef RGB_ENABLE
-    # Include my fancy rgb functions source here
-endif
-```
-Because of this, any time you turn on QMK features in your `users/<name>/rules.mk`, you should conditionally enable them only if the flag isn't already defined, like this:
-```make
-ifndef TAP_DANCE_ENABLE
-    TAP_DANCE_ENABLE = yes
-endif
-```
-This will ensure that you can explicitly turn off features for an individual keymap.
 
-## Readme
+## Readme (`readme.md`)
 
 Please include authorship (your name, github username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
 
-## `Config.h`
+You can use this as a template: 
+```
+Copyright <year> <name> <email> @<github_username>
 
-If you do add a `config,h` file, you want to make sure that it only gets processed once.  So you may want to start off with something like this:
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
 
-```c
-#ifndef USERSPACE_CONFIG_H
-#define USERSPACE_CONFIG_H
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
 
-// Put normal config.h settings here:
-
-#endif // !USERSPACE_CONFIG_H
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
 ```
 
-You can use any option hre that you could use in your keymap's `config.h` file. You can find a list of vales [here](config_options.md).
+You'd want to replace the year, name, email and github username with your info. 
 
-## Example
+Additionally, this is a good place to document your code, if you wish to share it with others. 
 
-For a brief example, checkout `/users/_example/` , or for a more detailed examples check out [`template.h`](https://github.com/qmk/qmk_firmware/blob/master/users/drashna/template.h) and [`template.c`](https://github.com/qmk/qmk_firmware/blob/master/users/drashna/template.c) in `/users/drashna/` .
+# Examples
 
-### Consolidated Macros
+For a brief example, checkout [`/users/_example/`](https://github.com/qmk/qmk_firmware/tree/master/users/drashna).  
+For a more complicated example, checkout [`/users/drashna/`](https://github.com/qmk/qmk_firmware/tree/master/users/drashna)'s userspace.
 
-If you wanted to consolidate macros and other functions into your userspace for all of your keymaps, you can do that.  The issue is that you then cannot call any function defined in your userspace, or it gets complicated.  To better handle this, you can call the functions here and create new functions to use in individual keymaps.
+
+## Customized Functions
+
+QMK has a bunch of [functions](custom_quantum_functions.md) that have [`_quantum`, `_kb`, and `_user` versions](custom_quantum_functions.md#a-word-on-core-vs-keyboards-vs-keymap) that you can use.  You will pretty much always want to use the user version of these functions.  But the problem is that if you use them in your userspace, then you don't have a version that you can use in your keymap. 
+
+However, you can actually add support for keymap version, so that you can use it in both your userspace and your keymap! 
+
+
+For instance, lets looks at the `layer_state_set_user` function.  Lets enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionalitly to all of our boards, and then still have your `keymap.c` still able to use this functionality. 
+
+In your `<name.c>` file, you'd want to add this: 
+```c
+__attribute__ ((weak))
+uint32_t layer_state_set_keymap (uint32_t state) {
+  return state;
+}
+
+uint32_t layer_state_set_user (uint32_t state) {
+  state = update_tri_layer_state(state, 2, 3, 5);
+  return layer_state_set_keymap (state);
+}
+```
+The `__attribute__ ((weak))` part tells the compiler that this is a placeholder function that can then be replaced by a version in your `keymap.c`.  That way, you don't need to add it to your `keymap.c`, but if you do, you won't get any conflicts because the function is the same name. 
+
+The `_keymap` part here doesn't matter, it just needs to be something other than `_quantum`, `_kb`, or `_user`, since those are already in use. So you could use `layer_state_set_mine`, `layer_state_set_fn`, or anything else.
+
+You can see a list of this and other common functions in [`template.c`](https://github.com/qmk/qmk_firmware/blob/master/users/drashna/template.c) in [`users/drashna`](https://github.com/qmk/qmk_firmware/tree/master/users/drashna).
+
+## Custom Features
+
+Since the Userspace feature can support a staggering number of boards, you may have boards that you want to enable certain functionality for, but not for others. And you can actually create "features" that you can enable or disable in your own userspace.  
+
+For instance, if you wanted to have a bunch of macros available, but only on certain boards (to save space), you could "hide" them being a `#ifdef MACROS_ENABLED`, and then enable it per board.  To do this, add this to your rules.mk
+```make
+ifeq ($(strip $(MACROS_ENABLED)), yes)
+    OPT_DEFS += -DMACROS_ENABLED
+endif
+```
+The `OPT_DEFS` setting causes `MACROS_ENABLED` to be defined for your keyboards (note the `-D` in front of the name), and you could use `#ifdef MACROS_ENABLED` to check the status in your c/h files, and handle that code based on that. 
+
+Then you add `MACROS_ENABLED = yes` to the `rules.mk` for you keymap to enable this feature and the code in your userspace.
+
+And in your `process_record_user` function, you'd do something like this: 
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+#ifdef MACROS_ENABLED
+  case MACRO1:
+    if (!record->event.pressed) {
+      SEND_STRING("This is macro 1!");
+    }
+    break;
+  case MACRO2:
+    if (!record->event.pressed) {
+      SEND_STRING("This is macro 2!");
+    }
+    break;
+#endif
+  }
+  return true;
+}
+```
+
+
+## Consolidated Macros
+
+If you wanted to consolidate macros and other functions into your userspace for all of your keymaps, you can do that.  This builds upon the [Customized Functions](#customized-functions) example above. This lets you maintain a bunch of macros that are shared between the different keyboards, and allow for keyboard specific macros, too. 
 
 First, you'd want to go through all of your `keymap.c` files and replace `process_record_user` with `process_record_keymap` instead.   This way, you can still use keyboard specific codes on those boards, and use your custom "global" keycodes as well.   You'll also want to replace `SAFE_RANGE` with `NEW_SAFE_RANGE` so that you wont have any overlapping keycodes
 
 Then add `#include <name.h>` to all of your keymap.c files.  This allows you to use these new keycodes without having to redefine them in each keymap.
 
 Once you've done that, you'll want to set the keycode definitions that you need to the `<name>.h`  file. For instance:
-```
-#ifndef USERSPACE
-#define USERSPACE
+```c
+#pragma once
 
 #include "quantum.h"
+#include "action.h"
+#include "version.h"
 
 // Define all of
 enum custom_keycodes {
   KC_MAKE = SAFE_RANGE,
   NEW_SAFE_RANGE  //use "NEW_SAFE_RANGE" for keymap specific codes
 };
-
-#endif
 ```
 
 Now you want to create the `<name>.c` file, and add this content to it:
 
-```
+```c
 #include "<name>.h"
-#include "quantum.h"
-#include "action.h"
-#include "version.h"
 
 __attribute__ ((weak))
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
@@ -126,14 +220,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 }
 ```
 
-This will add a new `KC_MAKE`  keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap">`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
+This will add a new `KC_MAKE` keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap>`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
 
 Additionally, this should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely (and will dump the HEX in the ".build" folder instead).
 
-## Override default userspace
 
-By default the userspace used will be the same as the keymap name. In some situations this isn't desirable. For instance, if you use the [layout](feature_layouts.md) feature you can't use the same name for different keymaps (e.g. ANSI and ISO). You can name your layouts `mylayout-ansi` and `mylayout-iso` and add the following line to your layout's `rules.mk`:
-
-```
-USER_NAME := mylayout
-```

docs/flashing.md

@@ -78,6 +78,12 @@ or
 
     make <keyboard>:<keymap>:avrdude
 
+or if you want to flash multiple boards, use the following command
+
+    make <keyboard>:<keymap>:avrdude-loop
+
+When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
+
 ## Halfkay
 
 Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0).

docs/internals_gpio_control.md

@@ -0,0 +1,23 @@
+# GPIO Control
+
+QMK has a GPIO control abstraction layer which is micro-controller agnostic. This is done to allow easy access to pin control across different platforms.
+
+## Functions
+
+The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`.
+
+|Function              |Description                                                       |
+|----------------------|------------------------------------------------------------------|
+|`setPinInput(pin)`    |Set pin as input with high impedance (High-Z)                     |
+|`setPinInputHigh(pin)`|Set pin as input with build in pull-up                            |
+|`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)|
+|`setPinOutput(pin)`   |Set pin as output                                                 |
+|`writePinHige(pin)`   |Set pin level as high, assuming it is an output                   |
+|`writePinLow(pin)`    |Set pin level as low, assuming it is an output                    |
+|`writePin(pin, level)`|Set pin level, assuming it is an output                           |
+|`readPin(pin)`        |Returns the level of the pin                                      |
+
+## Advance settings
+
+Each micro-controller can have multiple advance settings regarding its GPIO. This abstraction layer does not limit the use of architecture specific functions. Advance users should consult the datasheet of there desired device and include any needed libraries. For AVR the standard avr/io.h library is used and for STM32 the Chibios [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
+

drivers/issi/is31fl3731.c

@@ -268,4 +268,3 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
         }
     }
 }
-

drivers/issi/is31fl3733.c

@@ -24,10 +24,10 @@
 #include "wait.h"
 #endif
 
-#include "is31fl3733.h"
 #include <string.h>
 #include "i2c_master.h"
 #include "progmem.h"
+#include "rgb_matrix.h"
 
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
@@ -250,4 +250,3 @@ void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
         }
     }
 }
-

drivers/issi/is31fl3736.c

@@ -0,0 +1,306 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include "is31fl3736.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+
+
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
+#define ISSI_PAGE_PWM 0x01        //PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
+#define ISSI_PAGE_FUNCTION 0x03   //PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 //PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
+#define ISSI_REG_RESET 0x11// PG3
+#define ISSI_REG_SWPULLUP 0x0F //PG3
+#define ISSI_REG_CSPULLUP 0x10 //PG3
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3736 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3736_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
+bool g_led_control_registers_update_required = false;
+
+void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes PG1 is already selected
+
+    // transmit PWM registers in 12 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 192; i += 16 ) {
+        g_twi_transfer_buffer[0] = i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3736_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG0
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    // Turn off all LEDs.
+    for ( int i = 0x00; i <= 0x17; i++ )
+    {
+        IS31FL3736_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG1
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    // Set PWM on all LEDs to 0
+    // No need to setup Breath registers to PWM as that is the default.
+    for ( int i = 0x00; i <= 0xBF; i++ )
+    {
+        IS31FL3736_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG3
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    // Set global current to maximum.
+    IS31FL3736_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    // Disable software shutdown.
+    IS31FL3736_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+
+    // Wait 10ms to ensure the device has woken up.
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+}
+
+void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        g_pwm_buffer[led.driver][led.r] = red;
+        g_pwm_buffer[led.driver][led.g] = green;
+        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31FL3736_set_color( i, red, green, blue );
+    }
+}
+
+void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+    // IS31FL3733
+    // The PWM register for a matrix position (0x00 to 0xBF) can be
+    // divided by 8 to get the LED control register (0x00 to 0x17),
+    // then mod 8 to get the bit position within that register.
+
+    // IS31FL3736
+    // The PWM register for a matrix position (0x00 to 0xBF) is interleaved, so:
+    // A1=0x00 A2=0x02 A3=0x04 A4=0x06 A5=0x08 A6=0x0A A7=0x0C A8=0x0E
+    // B1=0x10 B2=0x12 B3=0x14
+    // But also, the LED control registers (0x00 to 0x17) are also interleaved, so:
+    // A1-A4=0x00 A5-A8=0x01
+    // So, the same math applies.
+
+	uint8_t control_register_r = led.r / 8;
+	uint8_t control_register_g = led.g / 8;
+	uint8_t control_register_b = led.b / 8;
+
+	uint8_t bit_r = led.r % 8;
+	uint8_t bit_g = led.g % 8;
+	uint8_t bit_b = led.b % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3736_mono_set_brightness( int index, uint8_t value )
+{
+    if ( index >= 0 && index < 96 ) {
+    	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+    	// Map index 0..95 to registers 0x00..0xBE (interleaved)
+    	uint8_t pwm_register = index * 2;
+        g_pwm_buffer[0][pwm_register] = value;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3736_mono_set_brightness_all( uint8_t value )
+{
+    for ( int i = 0; i < 96; i++ )
+    {
+    	IS31FL3736_mono_set_brightness( i, value );
+    }
+}
+
+void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled )
+{
+	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+
+	// Map index 0..95 to registers 0x00..0xBE (interleaved)
+	uint8_t pwm_register = index * 2;
+	// Map register 0x00..0xBE (interleaved) into control register and bit
+	uint8_t control_register = pwm_register / 8;
+	uint8_t bit = pwm_register % 8;
+
+    if ( enabled ) {
+        g_led_control_registers[0][control_register] |= (1 << bit);
+    } else {
+        g_led_control_registers[0][control_register] &= ~(1 << bit);
+    }
+
+    g_led_control_registers_update_required = true;
+}
+
+void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG1
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+
+        IS31FL3736_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        //IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG0
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        for ( int i=0; i<24; i++ )
+        {
+            IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i] );
+            //IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}
+

drivers/issi/is31fl3736.h

@@ -0,0 +1,172 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+
+// Simple interface option.
+// If these aren't defined, just define them to make it compile
+
+
+#ifndef DRIVER_COUNT
+#define DRIVER_COUNT 2
+#endif
+
+#ifndef DRIVER_LED_TOTAL
+#define DRIVER_LED_TOTAL 96
+#endif
+
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3736_init( uint8_t addr );
+void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+void IS31FL3736_mono_set_brightness( int index, uint8_t value );
+void IS31FL3736_mono_set_brightness_all( uint8_t value );
+void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define A_1  0x00
+#define A_2  0x02
+#define A_3  0x04
+#define A_4  0x06
+#define A_5  0x08
+#define A_6  0x0A
+#define A_7  0x0C
+#define A_8  0x0E
+
+#define B_1  0x10
+#define B_2  0x12
+#define B_3  0x14
+#define B_4  0x16
+#define B_5  0x18
+#define B_6  0x1A
+#define B_7  0x1C
+#define B_8  0x1E
+
+#define C_1  0x20
+#define C_2  0x22
+#define C_3  0x24
+#define C_4  0x26
+#define C_5  0x28
+#define C_6  0x2A
+#define C_7  0x2C
+#define C_8  0x2E
+
+#define D_1  0x30
+#define D_2  0x32
+#define D_3  0x34
+#define D_4  0x36
+#define D_5  0x38
+#define D_6  0x3A
+#define D_7  0x3C
+#define D_8  0x3E
+
+#define E_1  0x40
+#define E_2  0x42
+#define E_3  0x44
+#define E_4  0x46
+#define E_5  0x48
+#define E_6  0x4A
+#define E_7  0x4C
+#define E_8  0x4E
+
+#define F_1  0x50
+#define F_2  0x52
+#define F_3  0x54
+#define F_4  0x56
+#define F_5  0x58
+#define F_6  0x5A
+#define F_7  0x5C
+#define F_8  0x5E
+
+#define G_1  0x60
+#define G_2  0x62
+#define G_3  0x64
+#define G_4  0x66
+#define G_5  0x68
+#define G_6  0x6A
+#define G_7  0x6C
+#define G_8  0x6E
+
+#define H_1  0x70
+#define H_2  0x72
+#define H_3  0x74
+#define H_4  0x76
+#define H_5  0x78
+#define H_6  0x7A
+#define H_7  0x7C
+#define H_8  0x7E
+
+#define I_1  0x80
+#define I_2  0x82
+#define I_3  0x84
+#define I_4  0x86
+#define I_5  0x88
+#define I_6  0x8A
+#define I_7  0x8C
+#define I_8  0x8E
+
+#define J_1  0x90
+#define J_2  0x92
+#define J_3  0x94
+#define J_4  0x96
+#define J_5  0x98
+#define J_6  0x9A
+#define J_7  0x9C
+#define J_8  0x9E
+
+#define K_1  0xA0
+#define K_2  0xA2
+#define K_3  0xA4
+#define K_4  0xA6
+#define K_5  0xA8
+#define K_6  0xAA
+#define K_7  0xAC
+#define K_8  0xAE
+
+#define L_1  0xB0
+#define L_2  0xB2
+#define L_3  0xB4
+#define L_4  0xB6
+#define L_5  0xB8
+#define L_6  0xBA
+#define L_7  0xBC
+#define L_8  0xBE
+

keyboards/converter/usb_usb/ble/config.h

@@ -1,13 +1,15 @@
-#ifndef CONFIG_BLE_H
-#define CONFIG_BLE_H
+#pragma once
 
 #undef PRODUCT
 #define PRODUCT         QMK BLE Adapter
 #undef DESCRIPTION
-#define DESCRIPTION  
+#define DESCRIPTION
 
 // Turn off the mode leds on the BLE module
 #define ADAFRUIT_BLE_ENABLE_MODE_LEDS 0
 #define ADAFRUIT_BLE_ENABLE_POWER_LED 0
 
-#endif
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+#define NO_ACTION_ONESHOT
+

keyboards/converter/usb_usb/ble/rules.mk

@@ -1,3 +1,23 @@
 BLUETOOTH = AdafruitBLE
 ADAFRUIT_BLE_ENABLE = yes
 F_CPU = 8000000
+
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+EXTRAFLAGS += -flto

keyboards/converter/usb_usb/keymap.c

@@ -1,288 +0,0 @@
-/*
-Copyright 2017 Balz Guenat <balz.guenat@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "keymap_common.h"
-
-
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
-    /* 0: plain Qwerty without layer switching
-     *         ,---------------. ,---------------. ,---------------.
-     *         |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24|
-     * ,---.   |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help  |
-     * `---'   `---------------' `---------------' `---------------' `-----------' `---------------' `-------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|JPY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -| |Stp|Agn|
-     * |-----------------------------------------------------------| |-----------| |---------------| |-------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | |Del|End|PgD| |  7|  8|  9|  +| |Mnu|Und|
-     * |-----------------------------------------------------------| `-----------' |---------------| |-------|
-     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  #|Retn|               |  4|  5|  6|KP,| |Sel|Cpy|
-     * |-----------------------------------------------------------|     ,---.     |---------------| |-------|
-     * |Shft|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |     |Up |     |  1|  2|  3|KP=| |Exe|Pst|
-     * |-----------------------------------------------------------| ,-----------. |---------------| |-------|
-     * |Ctl|Gui|Alt|MHEN|HNJ| Space  |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |  0    |  .|Ent| |Fnd|Cut|
-     * `-----------------------------------------------------------' `-----------' `---------------' `-------'
-     */
-    // KEYMAP_ALL(
-    //           F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    // ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    // GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    // TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    // CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    // LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    // LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    // ),
-    KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-    KEYMAP_ALL(
-              TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-    TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,          TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,
-    GRV, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    CAPS,MPRV,VOLU,MNXT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,     TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,MUTE,VOLD,MPLY,TRNS,TRNS,LEFT,DOWN,UP,  RGHT,TRNS,TRNS,     TRNS,TRNS,                        TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,          TRNS,         TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,TRNS,    TRNS,     TRNS,TRNS,    TRNS,TRNS
-    ),
-};
-
-// const action_t fn_actions[] PROGMEM = {};
-
-const action_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1),
-};
-
-
-
-/*
- * Keymap samples
- */
-#if 0
-    /* ANSI layout
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     * `---'   `---------------' `---------------' `---------------' `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|    Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | |Del|End|PgD| |  7|  8|  9|  +|
-     * |-----------------------------------------------------------| `-----------' |-----------|   |
-     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  Return|               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
-     * |-----------------------------------------------------------| ,-----------. |-----------|   |
-     * |Ctl|Gui|Alt|           Space               |Alt|Gui|App|Ctl| |Lef|Dow|Rig| |      0|  .|Ent|
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP(
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,      PSCR,SLCK,BRK,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
-    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
-    ),
-
-    /* ISO layout
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     * `---'   `---------------' `---------------' `---------------' `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  ^|    Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| Retn| |Del|End|PgD| |  7|  8|  9|  +|
-     * |------------------------------------------------------`    | `-----------' |-----------|   |
-     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|    |               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shft|\  |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|Ent|
-     * |-----------------------------------------------------------| ,-----------. |-----------|   |
-     * |Ctl|Gui|Alt|           Space       |HNK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |      0|  .|   |
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP_ISO(
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,      PSCR,SLCK,BRK,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,ENT,      DEL, END, PGDN,    P7,  P8,  P9,  PPLS,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,NUHS,                             P4,  P5,  P6,
-    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RSFT,          UP,           P1,  P2,  P3,  PENT,
-    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT 
-    ),
-
-    /* JIS layout
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     * `---'   `---------------' `---------------' `---------------' `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  ^|JPY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  @|  [| Retn| |Del|End|PgD| |  7|  8|  9|  +|
-     * |------------------------------------------------------`    | `-----------' |-----------|   |
-     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  ]|    |               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shft    |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |     |Up |     |  1|  2|  3|Ent|
-     * |-----------------------------------------------------------| ,-----------. |-----------|   |
-     * |Ctl|Gui|Alt|MHEN|      Space      |HENK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |      0|  .|   |
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP_JIS(
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JPY, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     ENT,      DEL, END, PGDN,    P7,  P8,  P9,  PPLS,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,NUHS,                                  P4,  P5,  P6,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RO,  RSFT,          UP,           P1,  P2,  P3,  PENT,
-    LCTL,LGUI,LALT,MHEN,     SPC,                HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT 
-    ),
-
-    /* Colemak http://colemak.com
-     * ,-----------------------------------------------------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa|
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  F|  P|  G|  J|  L|  U|  Y|  ;|  [|  ]|    \|
-     * |-----------------------------------------------------------|
-     * |BackSp|  A|  R|  S|  T|  D|  H|  N|  E|  I|  O|  '|Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  K|  M|  ,|  ,|  /|Shift     |
-     * |-----------------------------------------------------------|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
-     * `----------------------------------------------------------'
-     */
-    KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, Q,   W,   F,   P,   G,   J,   L,   U,   Y,   SCLN,LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    BSPC,A,   R,   S,   T,   D,   H,   N,   E,   I,   O,   QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,Z,   X,   C,   V,   B,   K,   M,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-
-    /* Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard
-     * ,-----------------------------------------------------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  [|  ]|Backspa|
-     * |-----------------------------------------------------------|
-     * |Tab  |  '|  ,|  .|  P|  Y|  F|  G|  C|  R|  L|  /|  =|    \|
-     * |-----------------------------------------------------------|
-     * |BackSp|  A|  O|  E|  U|  I|  D|  H|  T|  N|  S|  -|Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |  ;|  Q|  J|  K|  X|  B|  M|  Wl  V|  Z|Shift     |
-     * |-----------------------------------------------------------|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   LBRC,RBRC,JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, QUOT,COMM,DOT, P,   Y,   F,   G,   C,   R,   L,   SLSH,EQL,      BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    CAPS,A,   O,   E,   U,   I,   D,   H,   T,   N,   S,   MINS,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,SCLN,Q,   J,   K,   X,   B,   M,   W,   V,   Z,        RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-
-    /* Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/
-     * ,-----------------------------------------------------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa|
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  D|  R|  W|  B|  J|  F|  U|  P|  ;|  [|  ]|    \|
-     * |-----------------------------------------------------------|
-     * |CapsLo|  A|  S|  H|  T|  G|  Y|  N|  E|  O|  I|  '|Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  M|  C|  V|  K|  L|  ,|  ,|  /|Shift     |
-     * |-----------------------------------------------------------|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, Q,   D,   R,   W,   B,   J,   F,   U,   P,   SCLN,LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    CAPS,A,   S,   H,   T,   G,   Y,   N,   E,   O,   I,   QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,Z,   X,   M,   C,   V,   K,   L,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     SPC,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-
-
-/*
- * SpaceFN layout
- * http://geekhack.org/index.php?topic=51069.0
- */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: plain Qwerty
-     *         ,---------------. ,---------------. ,---------------.
-     *         |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24|
-     * ,---.   |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help  |
-     * `---'   `---------------' `---------------' `---------------' `-----------' `---------------' `-------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|JPY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -| |Stp|Agn|
-     * |-----------------------------------------------------------| |-----------| |---------------| |-------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | |Del|End|PgD| |  7|  8|  9|  +| |Mnu|Und|
-     * |-----------------------------------------------------------| `-----------' |---------------| |-------|
-     * |LCtrl |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  #|Retn|               |  4|  5|  6|KP,| |Sel|Cpy|
-     * |-----------------------------------------------------------|     ,---.     |---------------| |-------|
-     * |Shft|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |     |Up |     |  1|  2|  3|KP=| |Exe|Pst|
-     * |-----------------------------------------------------------| ,-----------. |---------------| |-------|
-     * |Ctl|Gui|Alt|MHEN|HNJ| Space  |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |  0    |  .|Ent| |Fnd|Cut|
-     * `-----------------------------------------------------------' `-----------' `---------------' `-------'
-     */
-    [0] = KEYMAP_ALL(
-              F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-    ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,PAUS,    VOLD,VOLU,MUTE,PWR,     HELP,
-    ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,    STOP,AGIN,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,    MENU,UNDO,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     NUHS,ENT,                         P4,  P5,  P6,  PCMM,    SLCT,COPY,
-    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RO,  RSFT,          UP,           P1,  P2,  P3,  PEQL,    EXEC,PSTE,
-    LCTL,LGUI,LALT,MHEN,HANJ,     FN0,      HAEN,HENK,KANA,RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT,    FIND,CUT
-    ),
-
-    /* 1: SpaceFN
-     * ,-----------------------------------------------------------.
-     * |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
-     * |-----------------------------------------------------------|
-     * |Caps |   |   |Esc|   |   |   |Hom|Up |End|Psc|Slk|Pau|Ins  |
-     * |-----------------------------------------------------------|
-     * |      |   |   |   |   |   |PgU|Lef|Dow|Rig|   |   |        |
-     * |-----------------------------------------------------------|
-     * |        |   |   |   |   |Spc|PgD|`  |~  |   |Men|          |
-     * |-----------------------------------------------------------|
-     * |    |    |    |                        |    |    |    |    |
-     * `-----------------------------------------------------------'
-     */
-    [1] = KEYMAP_ALL(
-              TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-    TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,          TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,
-    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, TRNS,DEL,      TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    CAPS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP,  END, PSCR,SLCK,PAUS,     INS,      TRNS,TRNS,TRNS,    TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS,     TRNS,TRNS,                        TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,APP,      TRNS,TRNS,          TRNS,         TRNS,TRNS,TRNS,TRNS,    TRNS,TRNS,
-    TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,TRNS,    TRNS,     TRNS,TRNS,    TRNS,TRNS
-    ),
-};
-
-const action_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
-    [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),    // tilde
-};
-
-#endif

keyboards/crkbd/info.json

@@ -1,5 +1,5 @@
 {
-  "keyboard_name": "crkbd (helidox) rev. 1",
+  "keyboard_name": "crkbd rev. 1",
   "url": "",
   "maintainer": "qmk",
   "width": 15,

keyboards/ergo42/keymaps/koba/config.h

@@ -0,0 +1,33 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+

keyboards/ergo42/keymaps/koba/keymap.c

@@ -0,0 +1,128 @@
+/* Copyright 2018 Daisuke Kobayashi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+enum {
+  _WIN,
+  _MACOS,
+  _LOWER,
+  _RAISE,
+  _FUNC
+};
+
+#define KC_KNA  KC_LANG1
+#define KC_EISU KC_LANG2
+#define LOWER   MO(_LOWER)
+#define RAISE   MO(_RAISE)
+#define FN      MO(_FUNC)
+#define WIN     DF(_WIN)
+#define MACOS   DF(_MACOS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* WIN
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * | Esc  | Tab  |   Q  |   W  |   E  |   R  |   T  |   |   Y  |   U  |   I  |   O  |   P  |  @ ` | Bksp |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * | Del  | Ctrl |   A  |   S  |   D  |   F  |   G  |   |   H  |   J  |   K  |   L  |  ; + |  ; * |Enter |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * | H/Z  |Shift |   Z  |   X  |   C  |   V  |   B  |   |   N  |   M  |  , < |  . > |  / ? |  Up  |Shift |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |  Fn  | Ctrl | Win  | Alt  | Mhen |LOWER |Space |   |Space |RAISE | Henk | Menu | Left | Down |Right |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_WIN] = LAYOUT( \
+    KC_ESC,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    JP_AT,   KC_BSPC, \
+    KC_DELT, KC_RCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, JP_COLN, KC_ENT,  \
+    KC_ZKHK, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,     KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   KC_RSFT, \
+    FN,      KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, LOWER,   KC_SPC,   KC_SPC,  RAISE,   KC_HENK, KC_APP,  KC_LEFT, KC_DOWN, KC_RGHT  \
+  ),
+
+  /* MACOS
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * | Esc  | Tab  |   Q  |   W  |   E  |   R  |   T  |   |   Y  |   U  |   I  |   O  |   P  |  @ ` | Bksp |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * | Del  | Ctrl |   A  |   S  |   D  |   F  |   G  |   |   H  |   J  |   K  |   L  |  ; + |  ; * |Enter |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * | Caps |Shift |   Z  |   X  |   C  |   V  |   B  |   |   N  |   M  |  , < |  . > |  / ? |  Up  |Shift |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |  Fn  | Ctrl | Opt  | Cmd  | Eisu |LOWER |Space |   |Space |RAISE | Kana | Cmd  | Left | Down |Right |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_MACOS] = LAYOUT( \
+    KC_ESC,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    JP_AT,   KC_BSPC, \
+    KC_DELT, KC_RCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, JP_COLN, KC_ENT,  \
+    KC_CAPS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,     KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   KC_RSFT, \
+    FN,      KC_LCTL, KC_LALT, KC_LGUI, KC_EISU, LOWER,   KC_SPC,   KC_SPC,  RAISE,   KC_KNA,  KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT  \
+  ),
+
+  /* LOWER
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * |      |      |   !  |   "  |   #  |   $  |   %  |   |   &  |   '  |   (  |   )  |      |   =  |      |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * |      |      | XXXX | XXXX | XXXX |   {  |   (  |   |   )  |   }  | XXXX |   ~  |   |  |   _  |      |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * |      |      | XXXX | XXXX | XXXX | XXXX | XXXX |   | XXXX | XXXX | XXXX | XXXX | XXXX | PgUp |      |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |   |      |      |      |      | Home | PgDn | End  |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT( \
+    _______, _______, S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5),  S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), JP_EQL,  _______, \
+    _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, JP_LCBR, JP_LPRN,  JP_RPRN, JP_RCBR, XXXXXXX, JP_TILD, JP_PIPE, JP_UNDS, _______, \
+    _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, _______, \
+    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END   \
+  ),
+
+  /* RAISE
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * |      |      |   1  |   2  |   3  |   4  |   5  |   |   6  |   7  |   8  |   9  |   0  |   -  |      |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * |      |      | F11  | F12  | XXXX |   [  |   (  |   |   )  |   ]  | XXXX |   ^  |   \  |   \  |      |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * |      |      |  F1  |  F2  |  F3  |  F4  |  F5  |   |  F6  |  F7  |  F8  |  F9  | F10  |      |      |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |   |      |      |      |      |      |      |      |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_RAISE] = LAYOUT( \
+    _______, _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,     KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, _______, \
+    _______, _______, KC_F11,  KC_F12,  XXXXXXX, JP_LBRC, JP_LPRN,  JP_RPRN, JP_RBRC, XXXXXXX, JP_CIRC, KC_JYEN, KC_RO,   _______, \
+    _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______  \
+  ),
+
+  /* FUNC
+   * ,------------------------------------------------.   ,------------------------------------------------.
+   * |Reset |      | XXXX | XXXX | XXXX | XXXX | XXXX |   |PrtSc |SLock |Pause | XXXX | XXXX | XXXX |      |
+   * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+   * |      |      | XXXX | XXXX | XXXX | XXXX | >Win |   | Ins  | XXXX | XXXX | XXXX | XXXX | XXXX |      |
+   * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+   * |      |      | XXXX | XXXX | XXXX | XXXX | >Mac |   | XXXX | XXXX | XXXX | XXXX | XXXX | Vol+ |      |
+   * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |   |      |      |      |      |      | Vol- | Play |
+   * `------------------------------------------------'   `------------------------------------------------'
+   */
+  [_FUNC] = LAYOUT( \
+    RESET,   _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, XXXXXXX, _______, \
+    _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, WIN,      KC_INS,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, \
+    _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MACOS,    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, _______, \
+    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, XXXXXXX, KC_VOLD, KC_MPLY  \
+  )
+};
+

keyboards/ergo42/keymaps/koba/readme.md

@@ -0,0 +1,57 @@
+# Keymap for Ergo42
+
+## About
+
+This keymap is for Ergo42.
+
+- JIS layout.
+- Independent Windows layout/MacOS layout layers.
+- Bottom row keys arranged like a standard keyboard.
+- Arrow keys are designed in the inverted-T.
+
+## Layout
+
+![keyboard-layout](https://user-images.githubusercontent.com/1042121/45888288-aa35ed00-bdf8-11e8-8741-71fe9a0fadc6.png)
+
+## Windows mode/MacOS mode
+
+|mode        |key         |
+|------------|------------|
+|Windows mode|Function + g|
+|MacOS mode  |Function + b|
+
+When switching mode, the following keys switches.
+
+|Windows        |MacOS       |
+|---------------|------------|
+|Alt            |Command(GUI)|
+|Windows(GUI)   |Option(Alt) |
+|Menu(App)      |Command(GUI)|
+|Muhenkan       |Eisu        |
+|Henkan         |Kana        |
+|Hankaku/Zenkaku|Caps        |
+
+## Layers
+
+|No.|Name    |Description                |
+|---|--------|---------------------------|
+| 4 |Function|Mode switch, Media         |
+| 3 |Raise   |Number, Function           |
+| 2 |Lower   |Symbol, Home/End, PgUp/PgDn|
+| 1 |MacOS   |MacOS layout               |
+| 0 |Windows |Windows layout             |
+
+When power is turn on, No.0 Windows layer becomes enabled.
+
+## Windows/MacOS layers
+
+Standard layers for Windows mode/MacOS mode.
+
+## Raise/Lower layers
+
+Layer enabled during pressing Raise or Lower key.
+
+## Function layer
+
+Layer enabled during pressing Function key.
+

keyboards/ergo42/keymaps/koba/readme_ja.md

@@ -0,0 +1,62 @@
+# Keymap for Ergo42
+
+## 概要
+
+Ergo42 用キーマップです。
+
+- JIS 配列
+- 独立した Windows 配列/MacOS 配列レイヤー
+- 普通のキーボード配列に似せた最下段キー
+- 逆 T 字 (凸型) 配列の矢印キー
+
+## レイアウト
+
+![keyboard-layout](https://user-images.githubusercontent.com/1042121/45888288-aa35ed00-bdf8-11e8-8741-71fe9a0fadc6.png)
+
+## Windows モード/MacOS モード
+
+|モード        |キー        |
+|--------------|------------|
+|Windows モード|Function + g|
+|MacOS モード  |Function + b|
+
+モードを切り替えることで下記のキーが切り替わります。
+
+|Windows     |MacOS       |
+|------------|------------|
+|Alt         |Command(GUI)|
+|Windows(GUI)|Option(Alt) |
+|Menu(App)   |Command(GUI)|
+|無変換      |英数        |
+|変換        |かな        |
+|半角/全角   |Caps        |
+
+## レイヤー
+
+|No.|名称    |内容                      |
+|---|--------|--------------------------|
+| 4 |Function|モード切替, メディア      |
+| 3 |Raise   |数字, ファンクションキー  |
+| 2 |Lower   |記号, Home/End, PgUp/PgDn |
+| 1 |MacOS   |MacOS 配列                |
+| 0 |Windows |Windows 配列              |
+
+電源 ON により No.0 の Windows レイヤーが有効になります。
+
+## Windows/MacOS レイヤー
+
+Windows モード/MacOS モードの標準レイヤー。
+
+## Raise/Lower レイヤー
+
+Raise キーまたは Lower キーを押している間だけ有効になるレイヤー。
+
+普通のキーボードの最上段キー (数字/記号) に加えて、標準レイヤーに入らなかった記号キーが3つ (`[{`, `]}`, `\_`) 入っています。  
+括弧キー `[{`, `]}` は `(`, `)` を加えて、左右対称に配置しました。
+
+## Function レイヤー
+
+Function キーを押している間だけ有効になるレイヤー。
+
+Windows モード/MacOS モードの切り替え、メディア系の操作、標準レイヤーに入らなかった機能キーのレイヤーです。
+

keyboards/ergodox_ez/rules.mk

@@ -83,6 +83,6 @@ SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
 SLEEP_LED_ENABLE = no
 API_SYSEX_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGB_MATRIX_ENABLE = no // enable later
+RGB_MATRIX_ENABLE = no # enable later
 
 LAYOUTS = ergodox

keyboards/fortitude60/config.h

@@ -19,5 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define CONFIG_H
 
 #include "config_common.h"
+#include <serial_config.h>
 
 #endif  // CONFIG_H

keyboards/fortitude60/keymaps/default/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 #define EE_HANDS
 
-#define USE_SERIAL_PD2
 /* #undef RGBLED_NUM */
 /* #define RGBLIGHT_ANIMATIONS */
 /* #define RGBLED_NUM 12 */

keyboards/fortitude60/keymaps/default/keymap.c

@@ -119,9 +119,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------.             ,-----------------------------------------.
  * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
  * |------+------+------+------+------+------.             ,------+------+------+------+------+------|
- * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |   `  |   1  |   ↑  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Bksp |
  * |------+------+------+------+------+------.             ,------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  |   |
+ * | Del  |   ←  |   ↓  |   →  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  |   |
  * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
  * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |ISO # |ISO / |      |      |      |
  * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'

keyboards/fortitude60/keymaps/default/rules.mk

@@ -1 +1,2 @@
 RGBLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = no

keyboards/fortitude60/rev1/config.h

@@ -64,12 +64,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 )
 
 /* ws2812 RGB LED */
-/* #define RGB_DI_PIN D3 */
-/* #define RGBLIGHT_TIMER */
-/* #define RGBLED_NUM 16    // Number of LEDs */
-/* #define ws2812_PORTREG  PORTD */
-/* #define ws2812_DDRREG   DDRD */
-
+#ifdef RGBLIGHT_ENABLE
+  #define RGB_DI_PIN B5
+  #define RGBLIGHT_TIMER
+  #define RGBLED_NUM 18    // Number of LEDs */
+#endif
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/fortitude60/rev1/rules.mk

@@ -1 +0,0 @@
-BACKLIGHT_ENABLE = yes

keyboards/fortitude60/serial.c

@@ -9,34 +9,128 @@
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <util/delay.h>
+#include <stddef.h>
 #include <stdbool.h>
 #include "serial.h"
+//#include <pro_micro.h>
 
-#ifndef USE_I2C
+#ifdef USE_SERIAL
 
-// Serial pulse period in microseconds. Its probably a bad idea to lower this
-// value.
-#define SERIAL_DELAY 24
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
+  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
+  uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+  #endif
+  #if SERIAL_MASTER_BUFFER_LENGTH > 0
+  uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+  #endif
+  uint8_t volatile status0 = 0;
 
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+SSTD_t transactions[] = {
+    { (uint8_t *)&status0,
+  #if SERIAL_MASTER_BUFFER_LENGTH > 0
+      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
+  #else
+      0, (uint8_t *)NULL,
+  #endif
+  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
+      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
+  #else
+      0, (uint8_t *)NULL,
+  #endif
+  }
+};
 
-#define SLAVE_DATA_CORRUPT (1<<0)
-volatile uint8_t status = 0;
+void serial_master_init(void)
+{ soft_serial_initiator_init(transactions); }
+
+void serial_slave_init(void)
+{ soft_serial_target_init(transactions); }
+
+// 0 => no error
+// 1 => slave did not respond
+// 2 => checksum error
+int serial_update_buffers()
+{ return soft_serial_transaction(); }
+
+#endif // Simple API (OLD API, compatible with let's split serial.c)
+
+#define ALWAYS_INLINE __attribute__((always_inline))
+#define NO_INLINE __attribute__((noinline))
+#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
+
+// Serial pulse period in microseconds.
+#define TID_SEND_ADJUST 14
+
+#define SELECT_SERIAL_SPEED 1
+#if SELECT_SERIAL_SPEED == 0
+  // Very High speed
+  #define SERIAL_DELAY 4             // micro sec
+  #define READ_WRITE_START_ADJUST 33 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 1
+  // High speed
+  #define SERIAL_DELAY 6             // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 2
+  // Middle speed
+  #define SERIAL_DELAY 12            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 3
+  // Low speed
+  #define SERIAL_DELAY 24            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 4
+  // Very Low speed
+  #define SERIAL_DELAY 50            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#else
+#error Illegal Serial Speed
+#endif
+
+
+#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
+#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
+
+#define SLAVE_INT_WIDTH_US 1
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
+#else
+  #define SLAVE_INT_ACK_WIDTH_UNIT 2
+  #define SLAVE_INT_ACK_WIDTH 4
+#endif
+
+static SSTD_t *Transaction_table = NULL;
 
 inline static
 void serial_delay(void) {
   _delay_us(SERIAL_DELAY);
 }
 
+inline static
+void serial_delay_half1(void) {
+  _delay_us(SERIAL_DELAY_HALF1);
+}
+
+inline static
+void serial_delay_half2(void) {
+  _delay_us(SERIAL_DELAY_HALF2);
+}
+
+inline static void serial_output(void) ALWAYS_INLINE;
 inline static
 void serial_output(void) {
   SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
 }
 
 // make the serial pin an input with pull-up resistor
+inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
 inline static
-void serial_input(void) {
+void serial_input_with_pullup(void) {
   SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
   SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
 }
@@ -46,190 +140,305 @@ uint8_t serial_read_pin(void) {
   return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
 }
 
+inline static void serial_low(void) ALWAYS_INLINE;
 inline static
 void serial_low(void) {
   SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
 }
 
+inline static void serial_high(void) ALWAYS_INLINE;
 inline static
 void serial_high(void) {
   SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
 }
 
-void serial_master_init(void) {
-  serial_output();
-  serial_high();
+void soft_serial_initiator_init(SSTD_t *sstd_table)
+{
+    Transaction_table = sstd_table;
+    serial_output();
+    serial_high();
 }
 
-void serial_slave_init(void) {
-  serial_input();
+void soft_serial_target_init(SSTD_t *sstd_table)
+{
+    Transaction_table = sstd_table;
+    serial_input_with_pullup();
 
-#ifndef USE_SERIAL_PD2
-  // Enable INT0
-  EIMSK |= _BV(INT0);
-  // Trigger on falling edge of INT0
-  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+#if SERIAL_PIN_MASK == _BV(PD0)
+    // Enable INT0
+    EIMSK |= _BV(INT0);
+    // Trigger on falling edge of INT0
+    EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+#elif SERIAL_PIN_MASK == _BV(PD2)
+    // Enable INT2
+    EIMSK |= _BV(INT2);
+    // Trigger on falling edge of INT2
+    EICRA &= ~(_BV(ISC20) | _BV(ISC21));
 #else
-  // Enable INT2
-  EIMSK |= _BV(INT2);
-  // Trigger on falling edge of INT2
-  EICRA &= ~(_BV(ISC20) | _BV(ISC21));
+ #error unknown SERIAL_PIN_MASK value
 #endif
 }
 
-// Used by the master to synchronize timing with the slave.
+// Used by the sender to synchronize timing with the reciver.
+static void sync_recv(void) NO_INLINE;
 static
 void sync_recv(void) {
-  serial_input();
-  // This shouldn't hang if the slave disconnects because the
-  // serial line will float to high if the slave does disconnect.
+  for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
+  }
+  // This shouldn't hang if the target disconnects because the
+  // serial line will float to high if the target does disconnect.
   while (!serial_read_pin());
-  serial_delay();
 }
 
-// Used by the slave to send a synchronization signal to the master.
+// Used by the reciver to send a synchronization signal to the sender.
+static void sync_send(void)NO_INLINE;
 static
 void sync_send(void) {
-  serial_output();
-
   serial_low();
   serial_delay();
-
   serial_high();
 }
 
 // Reads a byte from the serial line
-static
-uint8_t serial_read_byte(void) {
-  uint8_t byte = 0;
-  serial_input();
-  for ( uint8_t i = 0; i < 8; ++i) {
-    byte = (byte << 1) | serial_read_pin();
-    serial_delay();
-    _delay_us(1);
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
+    uint8_t byte, i, p, pb;
+
+  _delay_sub_us(READ_WRITE_START_ADJUST);
+  for( i = 0, byte = 0, p = 0; i < bit; i++ ) {
+      serial_delay_half1();   // read the middle of pulses
+      if( serial_read_pin() ) {
+	  byte = (byte << 1) | 1; p ^= 1;
+      } else {
+	  byte = (byte << 1) | 0; p ^= 0;
+      }
+      _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+      serial_delay_half2();
   }
+  /* recive parity bit */
+  serial_delay_half1();   // read the middle of pulses
+  pb = serial_read_pin();
+  _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+  serial_delay_half2();
+
+  *pterrcount += (p != pb)? 1 : 0;
 
   return byte;
 }
 
 // Sends a byte with MSB ordering
-static
-void serial_write_byte(uint8_t data) {
-  uint8_t b = 8;
-  serial_output();
-  while( b-- ) {
-    if(data & (1 << b)) {
-      serial_high();
-    } else {
-      serial_low();
+void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
+void serial_write_chunk(uint8_t data, uint8_t bit) {
+    uint8_t b, p;
+    for( p = 0, b = 1<<(bit-1); b ; b >>= 1) {
+	if(data & b) {
+	    serial_high(); p ^= 1;
+	} else {
+	    serial_low();  p ^= 0;
+	}
+	serial_delay();
     }
+    /* send parity bit */
+    if(p & 1) { serial_high(); }
+    else      { serial_low(); }
     serial_delay();
+
+    serial_low(); // sync_send() / senc_recv() need raise edge
+}
+
+static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
+static
+void serial_send_packet(uint8_t *buffer, uint8_t size) {
+  for (uint8_t i = 0; i < size; ++i) {
+    uint8_t data;
+    data = buffer[i];
+    sync_send();
+    serial_write_chunk(data,8);
   }
 }
 
-// interrupt handle to be used by the slave device
+static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
+static
+uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
+  uint8_t pecount = 0;
+  for (uint8_t i = 0; i < size; ++i) {
+    uint8_t data;
+    sync_recv();
+    data = serial_read_chunk(&pecount, 8);
+    buffer[i] = data;
+  }
+  return pecount == 0;
+}
+
+inline static
+void change_sender2reciver(void) {
+    sync_send();          //0
+    serial_delay_half1(); //1
+    serial_low();         //2
+    serial_input_with_pullup(); //2
+    serial_delay_half1(); //3
+}
+
+inline static
+void change_reciver2sender(void) {
+    sync_recv();     //0
+    serial_delay();  //1
+    serial_low();    //3
+    serial_output(); //3
+    serial_delay_half1(); //4
+}
+
+// interrupt handle to be used by the target device
 ISR(SERIAL_PIN_INTERRUPT) {
-  sync_send();
 
-  uint8_t checksum = 0;
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    serial_write_byte(serial_slave_buffer[i]);
-    sync_send();
-    checksum += serial_slave_buffer[i];
-  }
-  serial_write_byte(checksum);
-  sync_send();
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  serial_low();
+  serial_output();
+  SSTD_t *trans = Transaction_table;
+#else
+  // recive transaction table index
+  uint8_t tid;
+  uint8_t pecount = 0;
+  sync_recv();
+  tid = serial_read_chunk(&pecount,4);
+  if(pecount> 0)
+      return;
+  serial_delay_half1();
 
-  // wait for the sync to finish sending
-  serial_delay();
+  serial_high(); // response step1 low->high
+  serial_output();
+  _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
+  SSTD_t *trans = &Transaction_table[tid];
+  serial_low(); // response step2 ack high->low
+#endif
 
-  // read the middle of pulses
-  _delay_us(SERIAL_DELAY/2);
+  // target send phase
+  if( trans->target2initiator_buffer_size > 0 )
+      serial_send_packet((uint8_t *)trans->target2initiator_buffer,
+			 trans->target2initiator_buffer_size);
+  // target switch to input
+  change_sender2reciver();
 
-  uint8_t checksum_computed = 0;
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    serial_master_buffer[i] = serial_read_byte();
-    sync_send();
-    checksum_computed += serial_master_buffer[i];
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_send();
-
-  serial_input(); // end transaction
-
-  if ( checksum_computed != checksum_received ) {
-    status |= SLAVE_DATA_CORRUPT;
+  // target recive phase
+  if( trans->initiator2target_buffer_size > 0 ) {
+      if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
+			       trans->initiator2target_buffer_size) ) {
+	  *trans->status = TRANSACTION_ACCEPTED;
+      } else {
+	  *trans->status = TRANSACTION_DATA_ERROR;
+      }
   } else {
-    status &= ~SLAVE_DATA_CORRUPT;
+      *trans->status = TRANSACTION_ACCEPTED;
   }
+
+  sync_recv(); //weit initiator output to high
 }
 
-inline
-bool serial_slave_DATA_CORRUPT(void) {
-  return status & SLAVE_DATA_CORRUPT;
-}
-
-// Copies the serial_slave_buffer to the master and sends the
-// serial_master_buffer to the slave.
+/////////
+//  start transaction by initiator
+//
+// int  soft_serial_transaction(int sstd_index)
 //
 // Returns:
-// 0 => no error
-// 1 => slave did not respond
-int serial_update_buffers(void) {
-  // this code is very time dependent, so we need to disable interrupts
+//    TRANSACTION_END
+//    TRANSACTION_NO_RESPONSE
+//    TRANSACTION_DATA_ERROR
+// this code is very time dependent, so we need to disable interrupts
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void) {
+  SSTD_t *trans = Transaction_table;
+#else
+int  soft_serial_transaction(int sstd_index) {
+  SSTD_t *trans = &Transaction_table[sstd_index];
+#endif
   cli();
 
-  // signal to the slave that we want to start a transaction
+  // signal to the target that we want to start a transaction
   serial_output();
   serial_low();
-  _delay_us(1);
+  _delay_us(SLAVE_INT_WIDTH_US);
 
-  // wait for the slaves response
-  serial_input();
-  serial_high();
-  _delay_us(SERIAL_DELAY);
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  // wait for the target response
+  serial_input_with_pullup();
+  _delay_us(SLAVE_INT_RESPONSE_TIME);
 
-  // check if the slave is present
+  // check if the target is present
   if (serial_read_pin()) {
-    // slave failed to pull the line low, assume not present
+    // target failed to pull the line low, assume not present
+    serial_output();
+    serial_high();
+    *trans->status = TRANSACTION_NO_RESPONSE;
     sei();
-    return 1;
+    return TRANSACTION_NO_RESPONSE;
   }
 
-  // if the slave is present syncronize with it
-  sync_recv();
+#else
+  // send transaction table index
+  sync_send();
+  _delay_sub_us(TID_SEND_ADJUST);
+  serial_write_chunk(sstd_index, 4);
+  serial_delay_half1();
 
-  uint8_t checksum_computed = 0;
-  // receive data from the slave
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    serial_slave_buffer[i] = serial_read_byte();
-    sync_recv();
-    checksum_computed += serial_slave_buffer[i];
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_recv();
-
-  if (checksum_computed != checksum_received) {
-    sei();
-    return 2;
+  // wait for the target response (step1 low->high)
+  serial_input_with_pullup();
+  while( !serial_read_pin() ) {
+      _delay_sub_us(2);
   }
 
-  uint8_t checksum = 0;
-  // send data to the slave
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    serial_write_byte(serial_master_buffer[i]);
-    sync_recv();
-    checksum += serial_master_buffer[i];
+  // check if the target is present (step2 high->low)
+  for( int i = 0; serial_read_pin(); i++ ) {
+      if (i > SLAVE_INT_ACK_WIDTH + 1) {
+	  // slave failed to pull the line low, assume not present
+	  serial_output();
+	  serial_high();
+	  *trans->status = TRANSACTION_NO_RESPONSE;
+	  sei();
+	  return TRANSACTION_NO_RESPONSE;
+      }
+      _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
+  }
+#endif
+
+  // initiator recive phase
+  // if the target is present syncronize with it
+  if( trans->target2initiator_buffer_size > 0 ) {
+      if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
+				trans->target2initiator_buffer_size) ) {
+	  serial_output();
+	  serial_high();
+	  *trans->status = TRANSACTION_DATA_ERROR;
+	  sei();
+	  return TRANSACTION_DATA_ERROR;
+      }
+   }
+
+  // initiator switch to output
+  change_reciver2sender();
+
+  // initiator send phase
+  if( trans->initiator2target_buffer_size > 0 ) {
+      serial_send_packet((uint8_t *)trans->initiator2target_buffer,
+			 trans->initiator2target_buffer_size);
   }
-  serial_write_byte(checksum);
-  sync_recv();
 
   // always, release the line when not in use
-  serial_output();
-  serial_high();
+  sync_send();
 
+  *trans->status = TRANSACTION_END;
   sei();
-  return 0;
+  return TRANSACTION_END;
 }
 
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int soft_serial_get_and_clean_status(int sstd_index) {
+    SSTD_t *trans = &Transaction_table[sstd_index];
+    cli();
+    int retval = *trans->status;
+    *trans->status = 0;;
+    sei();
+    return retval;
+}
 #endif
+
+#endif

keyboards/fortitude60/serial.h

@@ -1,32 +1,80 @@
-#ifndef MY_SERIAL_H
-#define MY_SERIAL_H
+#ifndef SOFT_SERIAL_H
+#define SOFT_SERIAL_H
 
-#include "config.h"
 #include <stdbool.h>
 
-/* TODO:  some defines for interrupt setup */
-#define SERIAL_PIN_DDR DDRD
-#define SERIAL_PIN_PORT PORTD
-#define SERIAL_PIN_INPUT PIND
+// /////////////////////////////////////////////////////////////////
+// Need Soft Serial defines in serial_config.h
+// /////////////////////////////////////////////////////////////////
+// ex.
+//  #define SERIAL_PIN_DDR DDRD
+//  #define SERIAL_PIN_PORT PORTD
+//  #define SERIAL_PIN_INPUT PIND
+//  #define SERIAL_PIN_MASK _BV(PD?)   ?=0,2
+//  #define SERIAL_PIN_INTERRUPT INT?_vect  ?=0,2
+//
+// //// USE Simple API (OLD API, compatible with let's split serial.c)
+// ex.
+//  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+//  #define SERIAL_MASTER_BUFFER_LENGTH 1
+//
+// //// USE flexible API (using multi-type transaction function)
+//  #define SERIAL_USE_MULTI_TRANSACTION
+//
+// /////////////////////////////////////////////////////////////////
 
-#ifndef USE_SERIAL_PD2
-#define SERIAL_PIN_MASK _BV(PD0)
-#define SERIAL_PIN_INTERRUPT INT0_vect
-#else
-#define SERIAL_PIN_MASK _BV(PD2)
-#define SERIAL_PIN_INTERRUPT INT2_vect
-#endif
 
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH 1
-
-// Buffers for master - slave communication
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
+#if SERIAL_SLAVE_BUFFER_LENGTH > 0
 extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+#endif
+#if SERIAL_MASTER_BUFFER_LENGTH > 0
 extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+#endif
 
 void serial_master_init(void);
 void serial_slave_init(void);
 int serial_update_buffers(void);
-bool serial_slave_data_corrupt(void);
 
+#endif // USE Simple API
+
+// Soft Serial Transaction Descriptor
+typedef struct _SSTD_t  {
+    uint8_t *status;
+    uint8_t initiator2target_buffer_size;
+    uint8_t *initiator2target_buffer;
+    uint8_t target2initiator_buffer_size;
+    uint8_t *target2initiator_buffer;
+} SSTD_t;
+
+// initiator is transaction start side
+void soft_serial_initiator_init(SSTD_t *sstd_table);
+// target is interrupt accept side
+void soft_serial_target_init(SSTD_t *sstd_table);
+
+// initiator resullt
+#define TRANSACTION_END 0
+#define TRANSACTION_NO_RESPONSE 0x1
+#define TRANSACTION_DATA_ERROR  0x2
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void);
+#else
+int  soft_serial_transaction(int sstd_index);
 #endif
+
+// target status
+// *SSTD_t.status has
+//   initiator:
+//       TRANSACTION_END
+//    or TRANSACTION_NO_RESPONSE
+//    or TRANSACTION_DATA_ERROR
+//   target:
+//       TRANSACTION_DATA_ERROR
+//    or TRANSACTION_ACCEPTED
+#define TRANSACTION_ACCEPTED 0x4
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_get_and_clean_status(int sstd_index);
+#endif
+
+#endif /* SOFT_SERIAL_H */

keyboards/fortitude60/serial_config.h

@@ -0,0 +1,14 @@
+#ifndef SOFT_SERIAL_CONFIG_H
+#define SOFT_SERIAL_CONFIG_H
+
+/* Soft Serial defines */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD2)
+#define SERIAL_PIN_INTERRUPT INT2_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+#endif /* SOFT_SERIAL_CONFIG_H */

keyboards/hadron/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -30,7 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 
-//#define AUDIO_VOICES	
+//#define AUDIO_VOICES
 
 //#define BACKLIGHT_PIN B7
 
@@ -71,13 +70,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-#ifdef SUBPROJECT_ver0
-    #include "ver0/config.h"
-#endif
-#ifdef SUBPROJECT_ver2
-    #include "ver2/config.h"
-#endif
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
 
-#endif

keyboards/hadron/keymaps/default/rules.mk

@@ -5,7 +5,7 @@
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no      # Mouse keys(+4700)
 EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = no        # Commands for debug and configuration
@@ -21,6 +21,4 @@ SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
+EXTRAFLAGS += -flto

keyboards/hadron/rules.mk

@@ -44,30 +44,32 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
+BOOTLOADER = halfkay
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 API_SYSEX_ENABLE = yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 SRC = i2c.c \
 	  ssd1306.c
 
-DEFAULT_FOLDER = hadron/ver2
+DEFAULT_FOLDER = hadron/ver2
+
+EXTRAFLAGS += -flto

keyboards/hadron/ver0/config.h

@@ -14,10 +14,7 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifndef VER0_CONFIG_H
-#define VER0_CONFIG_H
-
-#include "../config.h"
+#pragma once
 
 /* USB Device descriptor parameter */
 #define DEVICE_VER      0x0001
@@ -32,4 +29,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define UNUSED_PINS
 
 
-#endif
+

keyboards/hadron/ver2/config.h

@@ -14,10 +14,7 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifndef VER2_CONFIG_H
-#define VER2_CONFIG_H
-
-#include "../config.h"
+#pragma once
 
 /* USB Device descriptor parameter */
 #define DEVICE_VER      0x0002
@@ -32,4 +29,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define UNUSED_PINS
 
 
-#endif
+

keyboards/hadron/ver2/rules.mk

@@ -1 +1 @@
-#AUDIO_ENABLE ?= yes           # Audio output on port C6
+#AUDIO_ENABLE = yes           # Audio output on port C6

keyboards/iris/keymaps/saviof/config.h

@@ -0,0 +1,39 @@
+/*
+Copyright 2018 Savio Fernandes
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+//#define USE_SERIAL
+#define USE_I2C
+
+/* Select hand configuration */
+
+//#define MASTER_LEFT
+#define MASTER_RIGHT
+// #define BACKLIGHT_BREATHING
+// #define EE_HANDS
+
+#define TAPPING_TERM 200
+
+// #undef RGBLED_NUM
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 30
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8

keyboards/iris/keymaps/saviof/keymap.c

@@ -0,0 +1,107 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJ 3
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJ,
+};
+
+//Tap Dance Declarations
+enum {
+  TD_SPC_ENT = 0
+};
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+    [TD_SPC_ENT] = ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)
+};
+
+#define KC_ KC_TRNS
+
+#define KC_LOWR LT(_LOWER, KC_LEFT) //LOWER
+#define KC_RASE LT(_RAISE, KC_RIGHT) //RAISE
+#define KC_ADJT LT(_ADJ, KC_LGUI) //RAISE
+#define KC_SCET TD(TD_SPC_ENT)
+#define KC_RST RESET
+#define KC_BL_S BL_STEP
+#define KC_DBUG DEBUG
+#define KC_RTOG RGB_TOG
+#define KC_RMOD RGB_MOD
+#define KC_LMOD RGB_RMOD
+#define KC_RHUI RGB_HUI
+#define KC_RHUD RGB_HUD
+#define KC_RSAI RGB_SAI
+#define KC_RSAD RGB_SAD
+#define KC_RVAI RGB_VAI
+#define KC_RVAD RGB_VAD
+#define KC_BTOG BL_TOGG
+#define KC_BLVL BL_STEP
+#define KC_BRTG BL_BRTG
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     ESC , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,DEL ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     LSFT, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     LCTL, Z  , X  , C  , V  , B  ,HOME,     END , N  , M  ,COMM,DOT ,SLSH,RSFT,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       ADJT,LOWR, SPC,         SCET,RASE, ENT
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_LOWER] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     TILD,EXLM, AT ,HASH, DLR,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     RST , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     DEL ,    ,LEFT,RGHT, UP ,LBRC,               RBRC, P4 , P5 , P6 ,PLUS,PIPE,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     BL_S,    ,    ,    ,DOWN,LCBR,LPRN,     RPRN,RCBR, P1 , P2 , P3 ,MINS,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,DEL ,         DEL ,    , P0
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_RAISE] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     F12 , F1 , F2 , F3 , F4 , F5 ,                F6 , F7 , F8 , F9 ,F10 ,F11 ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,EXLM, AT ,HASH,DLR ,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,MPRV,MNXT,VOLU,PGUP,UNDS,               EQL ,HOME,    ,    ,    ,BSLS,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     MUTE,MSTP,MPLY,VOLD,PGDN,MINS,    ,         ,PLUS,END ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_ADJ] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+         ,LMOD,    ,    ,    ,    ,                   ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     RTOG,RMOD,RHUI,RSAI,RVAI,    ,               BTOG,BLVL,BRTG,    ,    ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,DBUG,RHUD,RSAD,RVAD,    ,                   ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     BL_S,RST ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  )
+
+};

keyboards/iris/keymaps/saviof/rules.mk

@@ -0,0 +1,3 @@
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+TAP_DANCE_ENABLE=yes

keyboards/jc65/v32a/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -43,4 +42,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 
-#endif
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+

keyboards/jc65/v32a/rules.mk

@@ -26,7 +26,7 @@ F_CPU = 12000000
 
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
+#     different sizes, comment this out, and the correct address will be loaded
 #     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = bootloadHID
 

keyboards/macropad/config.h

@@ -0,0 +1,224 @@
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Treasure
+#define PRODUCT         Macropad Type 9
+#define DESCRIPTION     A custom macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6, D7, C6 }
+#define MATRIX_COL_PINS { D1, D0, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 10
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/macropad/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "Macropad",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 3,
+  "height": 3,
+  "layouts": {
+      "LAYOUT": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}]
+      }
+  }
+}

keyboards/macropad/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/macropad/keymaps/default/keymap.c

@@ -0,0 +1,64 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_0,  KC_1, KC_2, \
+    KC_3,  KC_4, KC_5, \
+    KC_6,  KC_7, KC_8   \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/macropad/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for macropad

keyboards/macropad/macropad.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "macropad.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/macropad/macropad.h

@@ -0,0 +1,40 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef MACROPAD_H
+#define MACROPAD_H
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT(    \
+    K00, K01, K02, \
+    K10, K11, K12, \
+    K20, K21, K22  \
+) \
+{ \
+    { K00, K01, K02 }, \
+    { K10, K11, K12 }, \
+    { K20, K21, K22 }, \
+}
+
+#endif

keyboards/macropad/readme.md

@@ -0,0 +1,13 @@
+# Macropad
+
+3x3 Macropad.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Treasure Macropad Type-9   
+Hardware Availability: [Treasure](http://macropad.co/)   
+
+Make example for this keyboard (after setting up your build environment):
+
+    make macropad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/macropad/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/massdrop/alt/alt.h

@@ -22,3 +22,13 @@
     {   K45, KC_NO,   K46,   K47,   K48,   K49,   K50,   K51,   K52,   K53,   K54,   K55,   K56,   K57,   K58, }, \
     {   K59,   K60,   K61, KC_NO, KC_NO, KC_NO,   K62, KC_NO, KC_NO, KC_NO,   K63,   K64,   K65,   K66,   K67, }, \
 }
+
+#define TOGGLE_FLAG_AND_PRINT(var, name) { \
+        if (var) { \
+            dprintf(name " disabled\r\n"); \
+            var = !var; \
+        } else { \
+            var = !var; \
+            dprintf(name " enabled\r\n"); \
+        } \
+    }

keyboards/massdrop/alt/keymaps/default/keymap.c

@@ -136,8 +136,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         case L_T_BR:
             if (record->event.pressed) {
                 led_animation_breathing = !led_animation_breathing;
-                if (led_animation_breathing)
-                {
+                if (led_animation_breathing) {
                     gcr_breathe = gcr_desired;
                     led_animation_breathe_cur = BREATHE_MIN_STEP;
                     breathe_dir = 1;
@@ -151,50 +150,32 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             return false;
         case U_T_AUTO:
             if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                usb_extra_manual = !usb_extra_manual;
-                CDC_print("USB extra port manual mode ");
-                CDC_print(usb_extra_manual ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode");
             }
             return false;
         case U_T_AGCR:
             if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                usb_gcr_auto = !usb_gcr_auto;
-                CDC_print("USB GCR auto mode ");
-                CDC_print(usb_gcr_auto ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
             }
             return false;
         case DBG_TOG:
             if (record->event.pressed) {
-                debug_enable = !debug_enable;
-                CDC_print("Debug mode ");
-                CDC_print(debug_enable ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
             }
             return false;
         case DBG_MTRX:
             if (record->event.pressed) {
-                debug_matrix = !debug_matrix;
-                CDC_print("Debug matrix ");
-                CDC_print(debug_matrix ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix");
             }
             return false;
         case DBG_KBD:
             if (record->event.pressed) {
-                debug_keyboard = !debug_keyboard;
-                CDC_print("Debug keyboard ");
-                CDC_print(debug_keyboard ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard");
             }
             return false;
         case DBG_MOU:
             if (record->event.pressed) {
-                debug_mouse = !debug_mouse;
-                CDC_print("Debug mouse ");
-                CDC_print(debug_mouse ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse");
             }
             return false;
         case MD_BOOT:
@@ -209,4 +190,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         default:
             return true; //Process all other keycodes normally
     }
-}
+}

keyboards/massdrop/alt/keymaps/mac/keymap.c

@@ -136,8 +136,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         case L_T_BR:
             if (record->event.pressed) {
                 led_animation_breathing = !led_animation_breathing;
-                if (led_animation_breathing)
-                {
+                if (led_animation_breathing) {
                     gcr_breathe = gcr_desired;
                     led_animation_breathe_cur = BREATHE_MIN_STEP;
                     breathe_dir = 1;
@@ -151,50 +150,32 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             return false;
         case U_T_AUTO:
             if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                usb_extra_manual = !usb_extra_manual;
-                CDC_print("USB extra port manual mode ");
-                CDC_print(usb_extra_manual ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode");
             }
             return false;
         case U_T_AGCR:
             if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                usb_gcr_auto = !usb_gcr_auto;
-                CDC_print("USB GCR auto mode ");
-                CDC_print(usb_gcr_auto ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
             }
             return false;
         case DBG_TOG:
             if (record->event.pressed) {
-                debug_enable = !debug_enable;
-                CDC_print("Debug mode ");
-                CDC_print(debug_enable ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
             }
             return false;
         case DBG_MTRX:
             if (record->event.pressed) {
-                debug_matrix = !debug_matrix;
-                CDC_print("Debug matrix ");
-                CDC_print(debug_matrix ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix");
             }
             return false;
         case DBG_KBD:
             if (record->event.pressed) {
-                debug_keyboard = !debug_keyboard;
-                CDC_print("Debug keyboard ");
-                CDC_print(debug_keyboard ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard");
             }
             return false;
         case DBG_MOU:
             if (record->event.pressed) {
-                debug_mouse = !debug_mouse;
-                CDC_print("Debug mouse ");
-                CDC_print(debug_mouse ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse");
             }
             return false;
         case MD_BOOT:

keyboards/massdrop/alt/rules.mk

@@ -30,3 +30,4 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
 VIRTSER_ENABLE = no         # USB Serial Driver
 RAW_ENABLE = no             # Raw device
+AUTO_SHIFT_ENABLE = no      # Auto Shift

keyboards/massdrop/ctrl/ctrl.h

@@ -30,3 +30,13 @@
     {   K59, K60, K61, K62, K63, K76, K50, K33   }, \
     {   K72, K73, K74, K75, K85, K86, K87,       }, \
 }
+
+#define TOGGLE_FLAG_AND_PRINT(var, name) { \
+        if (var) { \
+            dprintf(name " disabled\r\n"); \
+            var = !var; \
+        } else { \
+            var = !var; \
+            dprintf(name " enabled\r\n"); \
+        } \
+    }

keyboards/massdrop/ctrl/keymaps/default/keymap.c

@@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,   KC_DEL,  KC_END,  KC_PGDN, \
         KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
         KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                              KC_UP, \
-        KC_LCTL, KC_LGUI, KC_LALT,                  KC_SPC,                              KC_RALT, MO(1),   KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT \
+        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, MO(1),   KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT \
     ),
     [1] = LAYOUT(
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_MUTE, KC_TRNS, KC_TRNS, \
@@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         L_T_BR,  L_PSD,   L_BRI,   L_PSI,   KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_MPRV, KC_MNXT, KC_VOLD, \
         L_T_PTD, L_PTP,   L_BRD,   L_PTN,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
         KC_TRNS, L_T_MD,  L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                              KC_TRNS, \
-        KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
     ),
     /*
     [X] = LAYOUT(
@@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, \
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                              KC_TRNS, \
-        KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
     ),
     */
 };
@@ -139,8 +139,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         case L_T_BR:
             if (record->event.pressed) {
                 led_animation_breathing = !led_animation_breathing;
-                if (led_animation_breathing)
-                {
+                if (led_animation_breathing) {
                     gcr_breathe = gcr_desired;
                     led_animation_breathe_cur = BREATHE_MIN_STEP;
                     breathe_dir = 1;
@@ -154,50 +153,32 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             return false;
         case U_T_AUTO:
             if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                usb_extra_manual = !usb_extra_manual;
-                CDC_print("USB extra port manual mode ");
-                CDC_print(usb_extra_manual ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode");
             }
             return false;
         case U_T_AGCR:
             if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                usb_gcr_auto = !usb_gcr_auto;
-                CDC_print("USB GCR auto mode ");
-                CDC_print(usb_gcr_auto ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
             }
             return false;
         case DBG_TOG:
             if (record->event.pressed) {
-                debug_enable = !debug_enable;
-                CDC_print("Debug mode ");
-                CDC_print(debug_enable ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
             }
             return false;
         case DBG_MTRX:
             if (record->event.pressed) {
-                debug_matrix = !debug_matrix;
-                CDC_print("Debug matrix ");
-                CDC_print(debug_matrix ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix");
             }
             return false;
         case DBG_KBD:
             if (record->event.pressed) {
-                debug_keyboard = !debug_keyboard;
-                CDC_print("Debug keyboard ");
-                CDC_print(debug_keyboard ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard");
             }
             return false;
         case DBG_MOU:
             if (record->event.pressed) {
-                debug_mouse = !debug_mouse;
-                CDC_print("Debug mouse ");
-                CDC_print(debug_mouse ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse");
             }
             return false;
         case MD_BOOT:

keyboards/massdrop/ctrl/keymaps/mac/keymap.c

@@ -33,15 +33,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,   KC_DEL,  KC_END,  KC_PGDN, \
         KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
         KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                              KC_UP, \
-        KC_LCTL, KC_LALT, KC_LGUI,                  KC_SPC,                              KC_RGUI, MO(1),   KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT \
+        KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPC,                             KC_RGUI, MO(1),   KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT \
     ),
     [1] = LAYOUT(
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_MUTE, KC_TRNS, KC_TRNS, \
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_MPLY, KC_MSTP, KC_VOLU, \
         L_T_BR,  L_PSD,   L_BRI,   L_PSI,   KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_MPRV, KC_MNXT, KC_VOLD, \
         L_T_PTD, L_PTP,   L_BRD,   L_PTN,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-        KC_TRNS, L_T_MD,  L_T_ONF, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                              KC_TRNS, \
-        KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
+        KC_TRNS, L_T_MD,  L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                              KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
     ),
     /*
     [X] = LAYOUT(
@@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, \
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                              KC_TRNS, \
-        KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS \
     ),
     */
 };
@@ -139,8 +139,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         case L_T_BR:
             if (record->event.pressed) {
                 led_animation_breathing = !led_animation_breathing;
-                if (led_animation_breathing)
-                {
+                if (led_animation_breathing) {
                     gcr_breathe = gcr_desired;
                     led_animation_breathe_cur = BREATHE_MIN_STEP;
                     breathe_dir = 1;
@@ -154,50 +153,32 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             return false;
         case U_T_AUTO:
             if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                usb_extra_manual = !usb_extra_manual;
-                CDC_print("USB extra port manual mode ");
-                CDC_print(usb_extra_manual ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode");
             }
             return false;
         case U_T_AGCR:
             if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                usb_gcr_auto = !usb_gcr_auto;
-                CDC_print("USB GCR auto mode ");
-                CDC_print(usb_gcr_auto ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
             }
             return false;
         case DBG_TOG:
             if (record->event.pressed) {
-                debug_enable = !debug_enable;
-                CDC_print("Debug mode ");
-                CDC_print(debug_enable ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
             }
             return false;
         case DBG_MTRX:
             if (record->event.pressed) {
-                debug_matrix = !debug_matrix;
-                CDC_print("Debug matrix ");
-                CDC_print(debug_matrix ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix");
             }
             return false;
         case DBG_KBD:
             if (record->event.pressed) {
-                debug_keyboard = !debug_keyboard;
-                CDC_print("Debug keyboard ");
-                CDC_print(debug_keyboard ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard");
             }
             return false;
         case DBG_MOU:
             if (record->event.pressed) {
-                debug_mouse = !debug_mouse;
-                CDC_print("Debug mouse ");
-                CDC_print(debug_mouse ? "enabled" : "disabled");
-                CDC_print("\r\n");
+                TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse");
             }
             return false;
         case MD_BOOT:

keyboards/massdrop/ctrl/rules.mk

@@ -30,3 +30,4 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
 VIRTSER_ENABLE = no         # USB Serial Driver
 RAW_ENABLE = no             # Raw device
+AUTO_SHIFT_ENABLE = no      # Auto Shift

keyboards/model01/config.h

@@ -33,3 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* The scanners already debounce for us */
 #define DEBOUNCING_DELAY 0
+
+/* RGB matrix constants */
+#define DRIVER_LED_TOTAL 64

keyboards/model01/keymaps/default/keymap.c

@@ -26,7 +26,7 @@ enum {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [DEF] = LAYOUT(
   RESET  , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   ,                      KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , TG(NUM),
-  KC_GRV , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , _______,    _______, KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_EQL ,
+  KC_GRV , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , RGB_MOD,    _______, KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_EQL ,
   KC_PGUP, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_TAB ,    KC_ENT , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT,
   KC_PGDN, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_ESC ,    _______, KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_MINS,
                                          KC_LCTL,                                 KC_RCTL,
@@ -48,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 [FUN] = LAYOUT(
   _______, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  ,                      KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 ,
-  KC_TAB , _______, KC_MS_U, _______, KC_BTN3, _______, _______,    KC_MPRV, KC_MNXT, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, KC_F12 ,
+  KC_TAB , _______, KC_MS_U, _______, KC_BTN3, _______, RGB_TOG,    KC_MPRV, KC_MNXT, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, KC_F12 ,
   KC_HOME, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN1, _______, _______,    KC_MPLY, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, _______, _______,
   KC_END , KC_PSCR, KC_INS , _______, KC_BTN2, _______, _______,    _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_BSLS, KC_PIPE,
                                          _______,                                 _______,
@@ -73,21 +73,52 @@ LAYOUT(
   )
 */
 
+static void set_numpad_colours(int on, void (*write)(int, uint8_t, uint8_t, uint8_t)) {
+  if (!on) {
+    for (int i=44; i<=60; i++)
+      write(i, 0, 0, 0);
+    write(63, 0, 0, 0);
+    return;
+  }
+
+  /* main number keys */
+  for (int i=44; i<=47; i++)
+    write(i, 255, 0, 0);
+  for (int i=49; i<=54; i++)
+    write(i, 255, 0, 0);
+
+  /* accessory keys */
+  write(48, 128, 128, 0);
+  for (int i=55; i<=59; i++)
+    write(i, 128, 128, 0);
+
+  // enter
+  write(63, 0, 128, 0);
+
+  // num key
+  write(60, 128, 0, 128);
+}
+
+#ifdef RGB_MATRIX_ENABLE
+/* the RGB matrix effects will overwrite the numpad indicator.
+ * this handy mechanism allows to override the matrix effects.
+ */
+void rgb_matrix_indicators_user(void) {
+  if (layer_state & (1<<NUM)) {
+    set_numpad_colours(1, &rgb_matrix_set_color);
+  }
+}
+#else   /* no RGB matrix support */
+
 uint32_t layer_state_set_user(uint32_t state) {
-  switch (biton32(state)) {
-    case DEF:
-      set_all_leds_to(0,0,0);
-      break;
-    case NUM:
-      /* highlight the numpad keys when numlock is on */
-      for (int i=44; i<=60; i++) {
-        set_led_to(i, 128,0,0);
-      }
-      set_led_to(63, 128, 0, 0);
-      break;
+  if (state & (1<<NUM)) {
+    set_numpad_colours(1, &set_led_to);
+  } else {
+    set_numpad_colours(0, &set_led_to);
   }
 
   return state;
 }
+#endif
 
 /* vim: set ts=2 sw=2 et: */

keyboards/model01/keymaps/dshields/config.h

@@ -1,8 +1,5 @@
 #pragma once
 
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 #define USB_MAX_POWER_CONSUMPTION 100
 #define ONESHOT_TAP_TOGGLE        2
 #define ONESHOT_TIMEOUT           3000

keyboards/model01/keymaps/dshields/rules.mk

@@ -1,2 +1 @@
-# used by default keymap
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes

keyboards/model01/leds.c

@@ -16,42 +16,154 @@
 #include <quantum.h>
 #include <i2c_master.h>
 #include <led_tables.h>
+#include <rgb_matrix.h>
+#include <string.h>
 #include "model01.h"
 
 #define I2C_TIMEOUT     1000
 
-#define LINCOR(i) pgm_read_byte(&CIE1931_CURVE[i])
-
-int set_all_leds_to_raw(uint8_t r, uint8_t g, uint8_t b) {
+void set_all_leds_to(uint8_t r, uint8_t g, uint8_t b) {
   uint8_t buf[] = {
     TWI_CMD_LED_SET_ALL_TO,
     b, g, r
   };
-  int ret = 0;
-  ret |= i2c_transmit(I2C_ADDR(LEFT), buf, sizeof(buf), I2C_TIMEOUT);
-  ret |= i2c_transmit(I2C_ADDR(RIGHT), buf, sizeof(buf), I2C_TIMEOUT);
+  i2c_transmit(I2C_ADDR(LEFT), buf, sizeof(buf), I2C_TIMEOUT);
+  i2c_transmit(I2C_ADDR(RIGHT), buf, sizeof(buf), I2C_TIMEOUT);
   _delay_us(10);
-  return ret;
 }
 
-int set_all_leds_to(uint8_t r, uint8_t g, uint8_t b) {
-  return set_all_leds_to_raw(LINCOR(r), LINCOR(g), LINCOR(b));
-}
-
-int set_led_to_raw(uint8_t led, uint8_t r, uint8_t g, uint8_t b) {
+void set_led_to(int led, uint8_t r, uint8_t g, uint8_t b) {
   uint8_t buf[] = {
     TWI_CMD_LED_SET_ONE_TO,
     led & 0x1f,
     b, g, r
   };
   int hand = (led >= 32) ? RIGHT : LEFT;
-  int ret = i2c_transmit(I2C_ADDR(hand), buf, sizeof(buf), I2C_TIMEOUT);
+  i2c_transmit(I2C_ADDR(hand), buf, sizeof(buf), I2C_TIMEOUT);
   _delay_us(10);
-  return ret;
 }
 
-int set_led_to(uint8_t led, uint8_t r, uint8_t g, uint8_t b) {
-  return set_led_to_raw(led, LINCOR(r), LINCOR(g), LINCOR(b));
+#ifdef RGB_MATRIX_ENABLE
+
+__attribute__ ((weak))
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+  {{0x73}, {  3, 35}, 0},
+  {{0x72}, {  0, 26}, 0},
+  {{0x71}, {  0, 17}, 0},
+  {{0x70}, {  0,  6}, 0},
+  {{0x60}, { 14,  5}, 0},
+  {{0x61}, { 15, 16}, 0},
+  {{0x62}, { 16, 25}, 0},
+  {{0x63}, { 17, 34}, 0},
+  {{0x53}, { 31, 29}, 0},
+  {{0x52}, { 31, 19}, 0},
+  {{0x51}, { 30, 11}, 0},
+  {{0x50}, { 30,  1}, 0},
+  {{0x40}, { 45,  0}, 0},
+  {{0x41}, { 45,  8}, 0},
+  {{0x42}, { 46, 17}, 0},
+  {{0x43}, { 46, 27}, 0},
+  {{0x33}, { 60, 27}, 0},
+  {{0x32}, { 60, 18}, 0},
+  {{0x31}, { 60,  9}, 0},
+  {{0x30}, { 60,  0}, 0},
+  {{0x20}, { 74,  2}, 0},
+  {{0x21}, { 74, 11}, 0},
+  {{0x22}, { 75, 20}, 0},
+  {{0x23}, { 74, 28}, 0},
+  {{0x12}, { 89, 30}, 0},
+  {{0x11}, { 89, 19}, 0},
+  {{0x10}, { 89,  7}, 0},
+  {{0x00}, { 70, 38}, 1},
+  {{0x01}, { 82, 41}, 1},
+  {{0x02}, { 93, 45}, 1},
+  {{0x03}, {104, 50}, 1},
+  {{0x13}, { 74, 64}, 1},
+  {{0x67}, {149, 64}, 1},
+  {{0x77}, {119, 50}, 1},
+  {{0x76}, {130, 45}, 1},
+  {{0x75}, {141, 41}, 1},
+  {{0x74}, {153, 38}, 1},
+  {{0x64}, {134,  7}, 0},
+  {{0x65}, {134, 19}, 0},
+  {{0x66}, {134, 30}, 0},
+  {{0x57}, {149, 28}, 0},
+  {{0x56}, {148, 20}, 0},
+  {{0x55}, {149, 11}, 0},
+  {{0x54}, {149,  2}, 0},
+  {{0x44}, {163,  0}, 0},
+  {{0x45}, {163,  9}, 0},
+  {{0x46}, {163, 18}, 0},
+  {{0x47}, {163, 27}, 0},
+  {{0x37}, {177, 27}, 0},
+  {{0x36}, {177, 17}, 0},
+  {{0x35}, {178,  8}, 0},
+  {{0x34}, {178,  0}, 0},
+  {{0x24}, {193,  1}, 0},
+  {{0x25}, {193, 11}, 0},
+  {{0x26}, {192, 19}, 0},
+  {{0x27}, {192, 29}, 0},
+  {{0x17}, {206, 34}, 0},
+  {{0x16}, {207, 25}, 0},
+  {{0x15}, {208, 16}, 0},
+  {{0x14}, {209,  5}, 0},
+  {{0x04}, {224,  6}, 0},
+  {{0x05}, {223, 17}, 0},
+  {{0x06}, {223, 26}, 0},
+  {{0x07}, {220, 35}, 0},
+};
+
+static struct {
+  uint8_t b;
+  uint8_t g;
+  uint8_t r;
+} __attribute__((packed)) led_state[64];
+
+static void set_color(int index, uint8_t r, uint8_t g, uint8_t b) {
+  led_state[index].r = r;
+  led_state[index].g = g;
+  led_state[index].b = b;
 }
 
+static void set_color_all(uint8_t r, uint8_t g, uint8_t b) {
+  for (int i=0; i<DRIVER_LED_TOTAL; i++)
+    set_color(i, r, g, b);
+}
+
+static void init(void) {
+  // Enable high current pathway to LEDs - this does violate the USB spec though! (1.6 amps...)
+  DDRE |= _BV(6);
+  PORTE &= ~_BV(6);
+
+  // Overcurrent check input
+  DDRB &= ~_BV(4);
+  PORTB &= ~_BV(4);
+}
+
+static void flush(void) {
+  uint8_t *bank_data = (uint8_t*)&led_state[0];
+  uint8_t command[1 + 8*3];
+  for (int hand=0; hand<2; hand++) {
+    int addr = I2C_ADDR(hand);
+
+    for (int bank=0; bank<4; bank++) {
+      command[0] = TWI_CMD_LED_BASE + bank;
+      memcpy(&command[1], bank_data, 8*3);
+      i2c_transmit(addr, command, sizeof(command), I2C_TIMEOUT);
+      _delay_us(100);
+
+      bank_data += 8*3;
+    }
+  }
+}
+
+const rgb_matrix_driver_t rgb_matrix_driver = {
+  .init = init,
+  .flush = flush,
+  .set_color = set_color,
+  .set_color_all = set_color_all
+};
+
+#endif
+
 /* vim: set ts=2 sw=2 et: */

keyboards/model01/leds.h

@@ -16,10 +16,7 @@
 #pragma once
 
 #include <quantum.h>
+#include <rgb_matrix.h>
 
-int set_all_leds_to(uint8_t r, uint8_t g, uint8_t b);
-int set_led_to(uint8_t led, uint8_t r, uint8_t g, uint8_t b);
-
-/* Raw (gamma uncorrected) LED values */
-int set_all_leds_to_raw(uint8_t r, uint8_t g, uint8_t b);
-int set_led_to_raw(uint8_t led, uint8_t r, uint8_t g, uint8_t b);
+void set_all_leds_to(uint8_t r, uint8_t g, uint8_t b);
+void set_led_to(int led, uint8_t r, uint8_t g, uint8_t b);

keyboards/model01/rules.mk

@@ -59,4 +59,6 @@ MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 
 CUSTOM_MATRIX = yes
-CIE1931_CURVE = yes
+
+# You can set RGB_MATRIX_ENABLE = no in your rules.mk to disable this and save the Flash
+RGB_MATRIX_ENABLE = custom	# Enable RGB matrix effects (+10000).

keyboards/nyquist/keymaps/mtdjr/config.h

@@ -0,0 +1,36 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/nyquist/keymaps/mtdjr/keymap.c

@@ -0,0 +1,64 @@
+#include QMK_KEYBOARD_H
+#include "mtdjr.h"
+
+extern keymap_config_t keymap_config;
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_kc (
+// ,-----------------------------.  .-----------------------------.
+    GESC,  1 ,  2 ,  3 ,  4 ,  5 ,     6 ,  7 ,  8 ,  9 ,  0 ,BSPC,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+     TAB,  Q ,  W ,  E ,  R ,  T ,     Y ,  U ,  I ,  O ,  P ,QUOT,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    RASE,  A ,  S ,  D ,  F ,  G ,     H ,  J ,  K ,  L ,SCLN, ENT,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    LSFT,  Z ,  X ,  C ,  V ,  B ,     N ,  M ,COMM, DOT,SLSH,xxxx,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    LOWR,LCTL,LALT,LGUI, SPC, SPC,    SPC, SPC,LEFT,DOWN, UP ,RGHT
+// '-----------------------------'  '-----------------------------'
+),
+
+  [_LOWER] = LAYOUT_kc(
+// ,-----------------------------.  .-----------------------------.
+    TILD,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,UNDS,PLUS, DEL,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,LBRC,RBRC,BSLS,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,xxxx,xxxx,    ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,UNDO, CUT,XCPY,XINS,xxxx,   xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,    ,    ,    ,    ,    ,       ,    ,MNXT,VOLD,VOLU,MPLY
+// '-----------------------------'  '-----------------------------'
+),
+
+  [_RAISE] = LAYOUT_kc(
+// ,-----------------------------.  .-----------------------------.
+    xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,MINS, EQL,    ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,LCBR,RCBR,PIPE,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,xxxx,xxxx,    ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,   xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,    ,    ,    ,    ,    ,       ,    ,MNXT,VOLD,VOLU,MPLY
+// '-----------------------------'  '-----------------------------'
+),
+
+  [_ADJUST] =  LAYOUT_kc(
+// ,-----------------------------.  .-----------------------------.
+    xxxx,ROOT,PPLY,PSEF,xxxx,xxxx,    F1 , F2 , F3 , F4 , F5 , F6 ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,xxxx,xxxx,xxxx, RST,xxxx,    F7 , F8 , F9 , F10, F11, F12,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        , RGB,RHUI,RSAI,RVAI, MOD,   xxxx,xxxx,xxxx,xxxx,xxxx,    ,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+    xxxx,RBTH,RHUD,RSAD,RVAD,RMOD,   xxxx,xxxx,xxxx,xxxx,xxxx, BLB,
+// |----+----+----+----+----+----|  |----+----+----+----+----+----|
+        ,xxxx,xxxx,xxxx,    ,    ,       ,    ,BLOF, BLD, BLI,BLON
+// '-----------------------------'  '-----------------------------'
+)
+
+};

keyboards/nyquist/keymaps/mtdjr/rules.mk

@@ -0,0 +1,2 @@
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes

keyboards/pearl/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef PEARL_CONFIG_H
-#define PEARL_CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -46,4 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 
-#endif
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+

keyboards/planck/keymaps/dshields/config.h

@@ -1,15 +1,4 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define QMK_ESC_OUTPUT F1
-#define QMK_ESC_INPUT  D5
-#define QMK_LED        E6
-#define QMK_SPEAKER    C6
-
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
+#pragma once
 
 #define USB_MAX_POWER_CONSUMPTION 100
 #define ONESHOT_TAP_TOGGLE        2
@@ -39,5 +28,3 @@
 // mod-tap keys
 #define MT_SPC  SFT_T(KC_SPC)
 
-#endif
-

keyboards/planck/keymaps/dshields/keymap.c

@@ -17,68 +17,24 @@ enum planck_keycodes { DYNAMIC_MACRO_RANGE = SAFE_RANGE };
 #endif
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Default
-     * ,-----------------------------------------------------------------------------------.
-     * |   Q  |   W  |   E  |   R  |   T  | Esc  | Bksp |   Y  |   U  |   I  |   O  |   P  |
-     * |------+------+------+------+------+-------------+------+------+------+------+------|
-     * |   A  |   S  |   D  |   F  |   G  | Tab  | Enter|   H  |   J  |   K  |   L  |   ;  |
-     * |------+------+------+------+------+------|------+------+------+------+------+------|
-     * |   Z  |   X  |   C  |   V  |   B  | Shift|DmPlay|   N  |   M  |   ,  |   .  |   /  |
-     * |------+------+------+------+------+------+------+------+------+------+------+------|
-     * | Ctrl | Super| Alt  | Fun  | Lower|    Space    | Raise| Left | Down |  Up  |Right |
-     * `-----------------------------------------------------------------------------------'
-     */
     [DEF] = LAYOUT_planck_grid(
         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_ESC,  KC_BSPC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P   ,
         KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_TAB,  KC_ENT,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,
         KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    OSM_SFT, DM_PLAY, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,
         OSM_CTL, KC_LGUI, OSM_ALT, OSL_FUN, OSL_LWR, MT_SPC,  MT_SPC,  OSL_RSE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
     ),
-    /* Lower
-     * ,-----------------------------------------------------------------------------------.
-     * |   !  |   @  |   #  |   $  |   %  |      |      |   ^  |   &  |   *  |   (  |   )  |
-     * |------+------+------+------+------+-------------+------+------+------+------+------|
-     * |   ~  |      |      |      |      |      |      |   _  |   +  |      |   {  |   }  |
-     * |------+------+------+------+------+------|------+------+------+------+------+------|
-     * |      |      |      |      |      |      |      |      |      |      |   "  |   |  |
-     * |------+------+------+------+------+------+------+------+------+------+------+------|
-     * |      |      |      |      |      |             |      | Home | PgDn | PgUp | End  |
-     * `-----------------------------------------------------------------------------------'
-     */
     [LWR] = LAYOUT_planck_grid(
         KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
         KC_TILD, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, _______, KC_LCBR, KC_RCBR,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DQUO, KC_PIPE,
         _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END 
     ),
-    /* Raise
-     * ,-----------------------------------------------------------------------------------.
-     * |   1  |   2  |   3  |   4  |   5  |      |      |   6  |   7  |   8  |   9  |   0  |
-     * |------+------+------+------+------+-------------+------+------+------+------+------|
-     * |   `  |      |      |      |      |      |      |   -  |   =  |      |   [  |   ]  |
-     * |------+------+------+------+------+------|------+------+------+------+------+------|
-     * |      |      |      |      |      |      |      |      |      |      |   '  |   \  |
-     * |------+------+------+------+------+------+------+------+------+------+------+------|
-     * |      |      |      |      |      |             |      | Home | PgDn | PgUp | End  |
-     * `-----------------------------------------------------------------------------------'
-     */
     [RSE] = LAYOUT_planck_grid(
         KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0   ,
         KC_GRV,  _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  _______, KC_LBRC, KC_RBRC,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_QUOT, KC_BSLS,
         _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END 
     ),
-    /* Function
-     * ,-----------------------------------------------------------------------------------.
-     * |  F1  |  F2  |  F3  |  F4  |  F5  | Reset|Delete|  F6  |  F7  |  F8  |  F9  | F10  |
-     * |------+------+------+------+------+-------------+------+------+------+------+------|
-     * | F11  | F12  | F13  | F14  | F15  |      |      |      |MsWhLt|MsWhDn|MsWhUp|MsWhRt|
-     * |------+------+------+------+------+------|------+------+------+------+------+------|
-     * |BlTggl|BlStep|      |      |      |DmStrt|DmStop|      |      |MsBtn1|MsBtn2|MsBtn3|
-     * |------+------+------+------+------+------+------+------+------+------+------+------|
-     * |      |      |      |      |      |             |      |MsLeft|MsDown| MsUp |MsRght|
-     * `-----------------------------------------------------------------------------------'
-     */
     [FUN] = LAYOUT_planck_grid(
         KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   RESET,   KC_DEL,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10 ,
         KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  _______, _______, _______, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R,

keyboards/planck/keymaps/jetpacktuxedo/config.h

@@ -2,6 +2,7 @@
 
 #ifdef AUDIO_ENABLE
     #define STARTUP_SONG SONG(PLANCK_SOUND)
+    #define AUDIO_CLICKY
 #endif
 
 /*
@@ -30,3 +31,4 @@
 
 // Most tactile encoders have detents every 4 stages
 #define ENCODER_RESOLUTION 4
+

keyboards/planck/keymaps/jetpacktuxedo/keymap.c

@@ -188,8 +188,24 @@ uint16_t muse_counter = 0;
 uint8_t muse_offset = 70;
 uint16_t muse_tempo = 20;
 
+extern float clicky_rand;
+
 void encoder_update(bool clockwise) {
-  if (muse_mode) {
+  if (is_clicky_on()) {
+    if (IS_LAYER_ON(_RAISE)) {
+      if (clockwise) {
+        clicky_rand += 0.5f;
+      } else {
+        clicky_rand -= 0.5f;
+      }
+    } else {
+      if (clockwise) {
+        clicky_freq_up();
+      } else {
+        clicky_freq_down();
+      }
+    }
+  } else if (muse_mode) {
     if (IS_LAYER_ON(_RAISE)) {
       if (clockwise) {
         muse_offset++;
@@ -248,6 +264,13 @@ void dip_update(uint8_t index, bool active) {
           stop_all_notes();
         #endif
       }
+      break;
+    case 3:
+      if (active) {
+        clicky_on();
+      } else {
+        clicky_off();
+      }
    }
 }
 

keyboards/rama/m60_a/config.h

@@ -18,8 +18,8 @@
 #include "config_common.h"
 
 // USB Device descriptor parameter
-#define VENDOR_ID       0xFEED // This is same as Zeal60 for now
-#define PRODUCT_ID      0x6060 // This is same as Zeal60 for now
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x060A // 60-A
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    RAMA.WORKS
 #define PRODUCT         RAMA M60-A

keyboards/rama/readme.md

@@ -6,4 +6,6 @@ Firmware for keyboards designed by [RAMA WORKS](https://rama.works)
 
 [RAMA M60-A](https://rama.works/#/m60-a/)
 
+[RAMA U80-A](https://rama.works/#/tkl-a/)
+
 [RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open)

keyboards/rama/u80_a/config.h

@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x080A // 80-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RAMA.WORKS
+#define PRODUCT         RAMA U80-A
+#define DESCRIPTION     RAMA U80-A Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+

keyboards/rama/u80_a/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "RAMA U80-A", 
+    "url": "https://rama.works/#/tkl-a/", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 18.25, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+        }
+    }
+}

keyboards/rama/u80_a/keymaps/default/keymap.c

@@ -0,0 +1,22 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	  [0] = LAYOUT_all(
+	    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_PSCR, KC_SLCK, KC_PAUS,
+	    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+	    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
+	    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_TRNS,                            KC_UP,
+	    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+
+	  [1] = LAYOUT_all(
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+

keyboards/rama/u80_a/readme.md

@@ -0,0 +1,15 @@
+# RAMA U80-A
+
+![RAMA U80-A](https://something.com/something.jpg)
+
+A TKL keyboard. [More info at RAMA WORKS](https://rama.works/#/tkl-a/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: RAMA U80-A PCB  
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make rama/u80_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/rama/u80_a/rules.mk

@@ -0,0 +1,68 @@
+# project specific files
+SRC =	drivers/issi/is31fl3736.c \
+		drivers/avr/i2c_master.c \
+		keyboards/wilba_tech/wt_mono_backlight.c \
+		keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/rama/u80_a/u80_a.c

@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)

keyboards/rama/u80_a/u80_a.h

@@ -0,0 +1,43 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 3,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 18 columns,
+// so the numbering goes 00 to 16. Deal with it.
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,             K014, K015, K016, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K114, K115, K116, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K214, K215, K216, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,                               \
+    K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,             K415,       \
+    K500, K501, K502,                   K506,                   K510, K511, K512, K513,       K514, K515, K516  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
+    { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \
+	{ K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \
+    { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 }  \
+}
+

keyboards/toad/config.h

@@ -0,0 +1,54 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6776
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    farmakon
+#define PRODUCT         "TOAD"
+#define DESCRIPTION     "TOAD"
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 14
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, F6, F5, F4, F1, F0 }
+#define MATRIX_COL_PINS { B3, B2, B1, E6, B7, C7, C6, D4, D6, D7, B4, D0, D1, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 0
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/toad/keymaps/ansi_wk/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP_ANSI_WK(
+	LAYOUT_ansi_wk(
 	KC_ESC,           KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,            \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,   \
@@ -12,19 +12,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	)
 };
 
-void led_set_user(uint8_t usb_led) {
 
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/keymaps/ansi_wkl/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP_ANSI_WKL(
+	LAYOUT_ansi_wkl(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                    \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,   \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,        KC_LALT,                                  KC_SPC,                 KC_RALT,      KC_RCTL
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/keymaps/default/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP(
+	LAYOUT_all(
 	KC_ESC,           KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,      KC_F9, KC_F10, KC_F11, KC_F12,              \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,    \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,         \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                  KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/keymaps/iso_wk/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP_ISO_WK(
+	LAYOUT_iso_wk(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                    \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC,            \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                 KC_RALT,KC_RGUI, KC_APP,KC_RCTL
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/keymaps/iso_wkl/keymap.c

@@ -1,8 +1,8 @@
-#include "xmmx.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	TOAD_KEYMAP_ISO_WKL(
+	LAYOUT_iso_wkl(
 	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                    \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC,            \
@@ -11,20 +11,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,        KC_LALT,                                  KC_SPC,                 KC_RALT,                KC_RCTL
 	)
 };
-
-void led_set_user(uint8_t usb_led) {
-
-	//LED1
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
-	}
-	
-	//LED2
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
-	} else {
-		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
-	}
-}

keyboards/toad/readme.md

@@ -0,0 +1,14 @@
+# Toad
+
+Toad: 70% Mechanical Keyboard PCB.
+
+Toad schematic and PCB are available opensource under Creative Commons BY-SA 3.0 license on EasyEDA at [this link](https://easyeda.com/farmakon/70_Keyboard-d4f6baf4792d4ada9c0571fa3713e461)
+
+For more informations on the Toad please visit this [geekhack.org thread](https://geekhack.org/index.php?topic=91388.0)
+
+Make examples for these keyboards (after setting up your build environment):
+
+    make toad:default
+
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/toad/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes	# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no

keyboards/toad/toad.c

@@ -0,0 +1,18 @@
+#include "toad.h"
+
+void led_set_user(uint8_t usb_led) {
+
+	//LED1
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 6); PORTB &= ~(1 << 6);
+	} else {
+		DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
+	}
+
+	//LED2
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
+	} else {
+		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
+	}
+}

keyboards/toad/toad.h

@@ -0,0 +1,91 @@
+#ifndef TOAD
+#define TOAD
+
+#include "quantum.h"
+
+// 70% keyboard: default - all keys
+#define LAYOUT_all( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,        \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,        \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,        \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,        \
+	K500, K501, K502,                         K507,             K510, K511, K512, K513         \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+	{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413 }, \
+	{ K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 }  \
+}
+
+// 70% keyboard: ANSI Winkey
+#define LAYOUT_ansi_wk( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,  \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,  \
+	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
+	K500, K501, K502,                         K507,             K510, K511, K512, K513   \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \
+	{ K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+	{ K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 }  \
+}
+
+// 70% keyboard: ANSI Winkeyless
+#define LAYOUT_ansi_wkl( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,  \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,  \
+	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
+	K500,       K502,                         K507,                   K511,       K513   \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \
+	{ K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+	{ K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 }  \
+}
+
+// 70% keyboard: ISO Winkey
+#define LAYOUT_iso_wk( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,        \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,  \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
+	K500, K501, K502,                         K507,             K510, K511, K512, K513   \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+	{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+	{ K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 }  \
+}
+
+// 70% keyboard: ISO Winkeyless
+#define LAYOUT_iso_wkl( \
+	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,  \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,  \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,        \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,  \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,        \
+	K500,       K502,                         K507,                   K511,       K513   \
+) { \
+	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+	{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+	{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \
+	{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+	{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+	{ K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 }  \
+}
+
+#endif

keyboards/vitamins_included/config.h

@@ -16,20 +16,12 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
-#if !defined(NO_DEBUG) && !defined(CONSOLE_ENABLE)
-#define NO_DEBUG
-#endif // !NO_DEBUG
-#if !defined(NO_PRINT) && !defined(CONSOLE_ENABLE)
-#define NO_PRINT
-#endif // !NO_PRINT
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
 
-#define DISABLE_LEADER
 
-#endif
+

keyboards/vitamins_included/keymaps/default/config.h

@@ -18,10 +18,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
+#pragma once
 
 /* Use I2C or Serial, not both */
 
@@ -40,5 +37,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
                                 SONG(COLEMAK_SOUND) \
                               }
 #endif
-
-#endif

keyboards/vitamins_included/keymaps/default/keymap.c

@@ -1,6 +1,4 @@
 #include QMK_KEYBOARD_H
-#include "action_layer.h"
-#include "eeconfig.h"
 
 extern keymap_config_t keymap_config;
 
@@ -141,28 +139,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
     case QWERTY:
       if (record->event.pressed) {
-        persistent_default_layer_set(1UL<<_QWERTY);
+        set_single_persistent_default_layer(_QWERTY);
       }
       return false;
       break;
     case COLEMAK:
       if (record->event.pressed) {
-        persistent_default_layer_set(1UL<<_COLEMAK);
+        set_single_persistent_default_layer(_COLEMAK);
       }
       return false;
       break;
     case DVORAK:
       if (record->event.pressed) {
-        persistent_default_layer_set(1UL<<_DVORAK);
+        set_single_persistent_default_layer(_DVORAK);
       }
       return false;
       break;

keyboards/vitamins_included/keymaps/default/rules.mk

@@ -1,3 +1 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
+

keyboards/vitamins_included/rules.mk

@@ -53,10 +53,10 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+COMMAND_ENABLE = no        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
@@ -64,7 +64,6 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-USE_I2C = no
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
@@ -74,4 +73,4 @@ LAYOUTS = ortho_4x12
 
 DEFAULT_FOLDER = vitamins_included/rev1
 
-EXTRAFLAGS        += -flto
+EXTRAFLAGS        += -flto

keyboards/whitefox/keymaps/konstantin/config.h

@@ -2,9 +2,9 @@
 
 #define FORCE_NKRO
 
-#define TAPPING_TOGGLE 2
-#define TAPPING_TERM 200
 #define PERMISSIVE_HOLD
+#define TAPPING_TERM 200
+#define TAPPING_TOGGLE 2
 
 #define MOUSEKEY_DELAY 50
 #define MOUSEKEY_INTERVAL 15

keyboards/whitefox/keymaps/konstantin/keymap.c

@@ -1,12 +1,14 @@
 #include QMK_KEYBOARD_H
 
+#define FN      MO(L_FN)
 #define FN_CAPS LT(L_FN, KC_CAPS)
-#define FN_CTRL TD(TD_FN_CTRL)
-#define RL_ALT  TD(TD_RL_ALT)  // Unused
+#define FN_RCTL TD(TD_FN_RCTL) // Unused
+#define RLALT   TD(TD_RLALT)   // Unused
 
 #define TOP     LCTL(KC_HOME)
 #define BOTTOM  LCTL(KC_END)
 
+#define UC_COMM UC(0x002C)
 #define UC_LPRN UC(0x0028)
 #define UC_RPRN UC(0x0029)
 #define UC_EQLS UC(0x003D)
@@ -32,19 +34,21 @@ enum custom_keycodes {
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record)
 {
-  if (!record->event.pressed) { return true; }
-
   switch (keycode) {
   case CLEAR:
-    SEND_STRING(SS_LCTRL("a") SS_TAP(X_DELETE));
+    if (record->event.pressed) {
+      SEND_STRING(SS_LCTRL("a") SS_TAP(X_DELETE));
+    }
     return false;
 
   case NUMPAD:
-    layer_invert(L_NUMPAD);
-    bool num_lock = host_keyboard_leds() & 1<<USB_LED_NUM_LOCK;
-    if (num_lock != (bool)IS_LAYER_ON(L_NUMPAD)) {
-      register_code(KC_NLCK);  // Force Num Lock to match layer state.
-      unregister_code(KC_NLCK);
+    if (record->event.pressed) {
+      layer_invert(L_NUMPAD);
+      bool num_lock = host_keyboard_leds() & 1<<USB_LED_NUM_LOCK;
+      if (num_lock != (bool)IS_LAYER_ON(L_NUMPAD)) {
+        register_code(KC_NLCK); // Toggle Num Lock to match layer state.
+        unregister_code(KC_NLCK);
+      }
     }
     return false;
 
@@ -54,8 +58,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record)
 }
 
 enum tap_dance {
-  TD_FN_CTRL,
-  TD_RL_ALT,  // Unused
+  TD_FN_RCTL,
+  TD_RLALT,
 };
 
 void td_fn_ctrl_finished(qk_tap_dance_state_t *state, void *user_data)
@@ -72,8 +76,8 @@ void td_fn_ctrl_reset(qk_tap_dance_state_t *state, void *user_data)
 }
 
 qk_tap_dance_action_t tap_dance_actions[] = {
-  [TD_FN_CTRL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, td_fn_ctrl_finished, td_fn_ctrl_reset),
-  [TD_RL_ALT]  = ACTION_TAP_DANCE_DOUBLE(KC_RALT, KC_LALT),  // Unused
+  [TD_FN_RCTL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, td_fn_ctrl_finished, td_fn_ctrl_reset),
+  [TD_RLALT]   = ACTION_TAP_DANCE_DOUBLE(KC_RALT, KC_LALT),
 };
 
 const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -85,17 +89,17 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |---------------------------------------------------------------|
    * |FnCaps| A | S | D | F | G | H | J | K | L | ; | ' | Enter  |PgU|
    * |---------------------------------------------------------------|
-   * | LShift | Z | X | C | V | B | N | M | , | . | / |RShift| ↑ |PgD|
+   * | LShift | Z | X | C | V | B | N | M | , | . | / |  Fn  | ↑ |PgD|
    * |---------------------------------------------------------------|
-   * |LCtl|LGui|LAlt|         Space          |RAlt|FnCt| | ← | ↓ | → |
+   * |LCtl|LGui|LAlt|         Space          |RAlt|RCtl| | ← | ↓ | → |
    * `---------------------------------------------------------------'
    */
   [L_BASE] = LAYOUT_truefox( \
     KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS,KC_GRV, KC_PSCR, \
     KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,        KC_DEL,  \
     FN_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,        KC_ENT,         KC_PGUP, \
-    KC_LSFT,        KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,        KC_UP,  KC_PGDN, \
-    KC_LCTL,KC_LGUI,KC_LALT,                        KC_SPC,                 KC_RALT,FN_CTRL,                KC_LEFT,KC_DOWN,KC_RGHT  \
+    KC_LSFT,        KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,FN,             KC_UP,  KC_PGDN, \
+    KC_LCTL,KC_LGUI,KC_LALT,                        KC_SPC,                 KC_RALT,KC_RCTL,                KC_LEFT,KC_DOWN,KC_RGHT  \
   ),
 
   /* Function layer
@@ -106,9 +110,9 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |---------------------------------------------------------------|
    * |      |M← |M↓ |M→ |MW↑|   |   |   |   |   |   |   |        |Top|
    * |---------------------------------------------------------------|
-   * |        |MA0|MA2|MW←|MW→|   |   |   |Vo-|Vo+|Mut|      |PgU|Btm|
+   * |        |MA0|MA2|MW←|MW→|   |   |   |VoD|VoU|Mut|      |PgU|Btm|
    * |---------------------------------------------------------------|
-   * |    |    |    |          MW↓           |App |    | |Hom|PgD|End|
+   * |    |    |    |          MW↓           |    |Menu| |Hom|PgD|End|
    * `---------------------------------------------------------------'
    */
   [L_FN] = LAYOUT_truefox( \
@@ -116,7 +120,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_BTN4,KC_BTN2,KC_MS_U,KC_BTN1,KC_BTN3,KC_BTN5,_______,_______,_______,KC_MSTP,KC_MPLY,KC_MPRV,KC_MNXT,CLEAR,          KC_INS,  \
     _______,KC_MS_L,KC_MS_D,KC_MS_R,KC_WH_U,_______,_______,_______,_______,_______,_______,_______,        _______,        TOP,     \
     _______,        KC_ACL0,KC_ACL2,KC_WH_L,KC_WH_R,_______,_______,_______,KC_VOLD,KC_VOLU,KC_MUTE,_______,        KC_PGUP,BOTTOM,  \
-    _______,_______,_______,                        KC_WH_D,                KC_APP, _______,                KC_HOME,KC_PGDN,KC_END   \
+    _______,_______,_______,                        KC_WH_D,                _______,KC_APP,                 KC_HOME,KC_PGDN,KC_END   \
   ),
 
   /* Numpad layer
@@ -127,7 +131,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |---------------------------------------------------------------|
    * |      |   |   |   |   |   |   |P1 |P2 |P3 |P* | × | PEnter |   |
    * |---------------------------------------------------------------|
-   * |        |   |   |   |   |   |P0 |P0 |P, |P. |P/ |  ÷   |   |   |
+   * |        |   |   |   |   |   |P0 |P0 | , |P. |P/ |  ÷   |   |   |
    * |---------------------------------------------------------------|
    * |    |    |    |                        |    |    | |   |   |   |
    * `---------------------------------------------------------------'
@@ -136,7 +140,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     NUMPAD, _______,_______,_______,_______,_______,_______,KC_P7,  KC_P8,  KC_P9,  KC_PMNS,UC_MINS,UC_EQLS,NUMPAD, _______,_______, \
     _______,_______,_______,_______,_______,_______,_______,KC_P4,  KC_P5,  KC_P6,  KC_PPLS,UC_LPRN,UC_RPRN,_______,        _______, \
     _______,_______,_______,_______,_______,_______,_______,KC_P1,  KC_P2,  KC_P3,  KC_PAST,UC_MULS,        KC_PENT,        _______, \
-    _______,        _______,_______,_______,_______,_______,KC_P0,  KC_P0,  KC_PCMM,KC_PDOT,KC_PSLS,UC_DIVS,        _______,_______, \
+    _______,        _______,_______,_______,_______,_______,KC_P0,  KC_P0,  UC_COMM,KC_PDOT,KC_PSLS,UC_DIVS,        _______,_______, \
     _______,_______,_______,                        _______,                _______,_______,                _______,_______,_______  \
   ),
 };

keyboards/wilba_tech/wt60_a/config.h

@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x060A // 60-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT60-A
+#define DESCRIPTION     wilba.tech WT60-A
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+

keyboards/wilba_tech/wt60_a/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "wilba.tech WT60-A", 
+    "url": "https://wilba.tech", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+        "LAYOUT_60_ansi_split_bs_rshift": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/wilba_tech/wt60_a/keymaps/ansi_split_bs_rshift/keymap.c

@@ -0,0 +1,38 @@
+// ANSI split backspace/right shift layout for WT60-A
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+	KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, KC_APP, KC_RCTL),
+
+// Fn1 Layer
+[1] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS, KC_DEL,
+	KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer
+[3] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};