Massdrop keyboards console device support for hid_listen

Added hid_listen USB device for arm_atsam USB protocol.
Debug printing is now done through the console device (CONSOLE_ENABLE = yes) rather than the virtser device, for viewing in hid_listen.
Function dpf(...) renamed to CDC_printf(...) and should now be called directly if intending to print to the virtual serial device.

docs/_sidebar.md

@@ -74,6 +74,7 @@
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
+  * [ARM Debugging Guide](arm_debugging.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/_summary.md

@@ -74,6 +74,7 @@
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
+  * [ARM Debugging Guide](arm_debugging.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/arm_debugging.md

@@ -0,0 +1,87 @@
+# ARM Debugging usign Eclipse
+
+This page describes how to setup debugging for ARM MCUs using an SWD adapter and open-source/free tools. In this guide we will install GNU MCU Eclipse IDE for C/C++ Developers and OpenOCD together with all the necessary dependencies.
+
+This guide is catered towards advance users and assumes you can compile an ARM compatible keyboard on your machine using the MAKE flow.
+
+## Installing the software
+
+The main objective here is to get the MCU Eclipse IDE correcly installed on our machine. The necesarry instructions are derived from [this](https://gnu-mcu-eclipse.github.io/install/) install guide.
+
+### The xPack Manager
+
+This tool is a software package manager and it is used to help us get the necesarry depencencies.
+
+XPM runs using Node.js so grab that form [here](https://nodejs.org/en/). After installation, open a terminal and type `npm -v`. A reply with the version number means that the instalation was successful.
+
+XPM instalation instructions can be found [here](https://www.npmjs.com/package/xpm) and are OS specific. Entering `xpm --version` to your terminal should return the software version.
+
+### The ARM Toolchain
+
+Using XPM it is very easy to install the ARM toolchain. Enter the command `xpm install --global @gnu-mcu-eclipse/arm-none-eabi-gcc`.
+
+### Windows build tools
+
+If you are using windows you need to install this!
+
+`xpm install --global @gnu-mcu-eclipse/windows-build-tools`
+
+### Programer/Debugger Drivers
+
+Now its the time to install your programer's drivers. This tutorial was made using an ST-Link v2 which you can get from almost anywhere.
+If you have an ST-Link the drivers can be found [here](https://www.st.com/en/development-tools/stsw-link009.html) otherwise consult the manufuturer of your tool.
+
+### OpenOCD
+
+This dependency allows SWD access from GDB and it is essential for debugging. Run `xpm install --global @gnu-mcu-eclipse/openocd`.
+
+### Java
+
+Java is needed by Eclipse so please download it from [here](https://www.oracle.com/technetwork/java/javase/downloads/index.html).
+
+### GNU MCU Eclipse IDE
+
+Now its finally time to install the IDE. Use the Release page [here](https://github.com/gnu-mcu-eclipse/org.eclipse.epp.packages/releases/) to get the latest version.
+
+## Configuring Eclipse
+
+Open up the Eclipse IDE we just downloaded. To import our QMK directory select File -> Import -> C/C++ -> Existing code as Makefile Project. Select next and use Browse to select your QMK folder. In the tool-chain list select ARM Cross GCC and select Finish.
+
+Now you can see the QMK folder on the left hand side. Right click it and select Properties. On the left hand side, expand MCU and select ARM Toolchain Paths. Press xPack and OK. Repeat for OpenOCD Path  and if you are on windows for Build Tool Path. Select Apply and Close.
+
+Now its time to install the necessary MCU packages. Go to Packs perspective by selecting Window -> Open Perspective -> Others -> Packs. Now select the yellow refresh symbol next to the Packs tab. This will take a long time as it is requesting the MCU definitions from various places. If some of the links fail you can probably select Ignore.
+
+When this finishes you must find the MCU which we will be building/debugging for. In this example I will be using the STM32F3 series MCUs. On the left, select STMicroelectonics -> STM32F3 Series. On the middle window we can see the pack. Right click and select Install. Once that is done we can go back to the default perspective, Window -> Open Perspective -> Others -> C/C++.
+
+We need to let eclipse know the device we intent to build QMK on. Right click on the QMK folder -> Properties -> C/C++ Build -> Settings. Select the Devices tab and under devices select the appropriate variant of your MCU. For my example it is STM32F303CC
+
+While we are here let's setup the build command as well. Select C/C++ Build and then the Behavior tab. On the build command, replace `all` with your necessary make command. For example for a rev6 Planck with the default keymap this would be `planck/rev6:default`. Select Apply and Close.
+
+## Building
+
+If you have setup everything correctly pressing the hammer button should build the firmware for you and a .bin file should appear.
+
+## Debugging
+
+### Connecting the Debugger
+
+ARM MCUs use the Single Wire Debug (SWD) protocol which comprises of the clock (SWCLK) signal and the data (SWDIO) signal. Connecting this two wires and ground should be enough to allow full manipulation of the MCU. Here we assume that the keyboard will be powered though USB. The RESET signal is not necessary as we can manually assert it using the reset button. For a more advance setup, the SWO signal can be used which pipes printf and scanf asynchronously to the host but for our setup we will ignore it.
+
+NOTE: Make sure the SWCLK and SWDIO pins are not used in the matrix of your keyboard. If they are you can temporarily switch them for some other pins.
+
+### Configuring the Debugger
+
+Right click on your QMK folder, select Debug As -> Debug Configuration. Here double click on GDB OpenOCD Debugging. Select the debugger tab and enter the configuration necessary for your MCU. This might take some fiddling and googleing to find out. The default script for the STM32F3 is called stm32f3discovery.cfg. To let OpenOCD know, in the Config options enter `-f board/stm32f3discovery.cfg`.
+
+NOTE: In my case this configuration script requires editing to disable the reset assertion. The locations of the scripts can be found in the actual executable field usually under the path `openocd/version/.content/scripts/board`. Here I edited `reset_config srst_only` to `reset_config none`.
+
+Select Apply and Close.
+
+### Running the Debugger.
+
+Reset your keyboard.
+
+Press the bug icon and if all goes well you should soon find yourself in the debug perspective. Here the program counter will pause at the beginning of the main function and way for you to press Play. Most of the features of all debuggers work on ARM MCUs but for exact details google is your friend!
+
+
+Happy debugging!

docs/config_options.md

@@ -245,7 +245,9 @@ Use these to enable or disable building certain features. The more you have enab
 * `UNICODE_ENABLE`
   * Unicode
 * `BLUETOOTH_ENABLE`
-  * Enable Bluetooth with the Adafruit EZ-Key HID
+  * Legacy option to Enable Bluetooth with the Adafruit EZ-Key HID. See BLUETOOTH
+* `BLUETOOTH`
+  * Current options are AdafruitEzKey, AdafruitBLE, RN42
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 * `WAIT_FOR_USB`

docs/contributing.md

@@ -57,14 +57,14 @@ Never made an open source contribution before? Wondering how contributions work
 Most of our style is pretty easy to pick up on, but right now it's not entirely consistent. You should match the style of the code surrounding your change, but if that code is inconsistent or unclear use the following guidelines:
 
 * We indent using two spaces (soft tabs)
-* We use One True Brace Style
+* We use a modified One True Brace Style
   * Opening Brace: At the end of the same line as the statement that opens the block
   * Closing Brace: Lined up with the first character of the statement that opens the block
   * Else If: Place the closing brace at the beginning of the line and the next opening brace at the end of the same line.
   * Optional Braces: Always include optional braces.
     * Good: if (condition) { return false; }
     * Bad: if (condition) return false;
-* We use C style comments: `/* */`
+* We encourage use of C style comments: `/* */`
   * Think of them as a story describing the feature
   * Use them liberally to explain why particular decisions were made.
   * Do not write obvious comments
@@ -72,6 +72,25 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely
 * In general we don't wrap lines, they can be as long as needed. If you do choose to wrap lines please do not wrap any wider than 76 columns.
 * We use `#pragma once` at the start of header files rather than old-style include guards (`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)
 
+Here is an example for easy reference:
+
+```c
+/* Enums for foo */
+enum foo_state {
+  FOO_BAR,
+  FOO_BAZ,
+};
+
+/* Returns a value */
+int foo(void) {
+  if (some_condition) {
+    return FOO_BAR;
+  } else {
+    return -1;
+  }
+}
+```
+
 # General Guidelines
 
 We have a few different types of changes in QMK, each requiring a different level of rigor. We'd like you to keep the following guidelines in mind no matter what type of change you're making.

docs/feature_advanced_keycodes.md

@@ -26,7 +26,8 @@ These functions allow you to activate layers in various ways. Note that layers a
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
 * `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
-* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped.
+* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
+* `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys](#one-shot-keys) for details and additional functionality.
 * `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
 * `TO(layer)` - activates *layer* and de-activates all other layers (except your default layer). This function is special, because instead of just adding/removing one layer to your active layer stack, it will completely replace your current active layers, uniquely allowing you to replace higher layers with a lower one. This is activated on keydown (as soon as the key is pressed).
 * `TT(layer)` - Layer Tap-Toggle. If you hold the key down, *layer* is activated, and then is de-activated when you let go (like `MO`). If you repeatedly tap it, the layer will be toggled on or off (like `TG`). It needs 5 taps by default, but you can change this by defining `TAPPING_TOGGLE` -- for example, `#define TAPPING_TOGGLE 2` to toggle on just two taps.

docs/feature_bluetooth.md

@@ -1,10 +1,40 @@
 # Bluetooth
 
-## Bluetooth Functionality
+## Bluetooth Known Supported Hardware
 
+Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1 Qmk has support for RN-42 HID Firmware and Bluefruit EZ Key the later of which is not produced anymore. For more recent BLE protocols currently only the Adafruit Bluefruit SPI friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support Mouse Input.
+
+|Board                                                           |Bluetooth Protocol          |Connection Type |Rules.mk                   |Bluetooth Chip|
+|----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
+|[Adafruit EzKey HID]("https://www.adafruit.com/product/1535")   |Bluetooth Classic           | UART           | BLUETOOTH = AdafruitEZKey |              |
+|Rover Networks RN-42 (Sparkfun Bluesmirf)                       |Bluetooth Classic           | UART           | BLUETOOTH = RN42          | RN-42        |
+|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy        | SPI            | BLUETOOTH = AdafruitBLE   | nRF5182      |
+
+Not Supported Yet but possible:
+* [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514)
+* HC-05 boards flashed with RN-42 firmware. They apparently both use the CSR BC417 Chip. Flashing it with RN-42 firmware gives it HID capability.
+* [Sparkfun Bluetooth mate](https://www.sparkfun.com/products/14839)
+* HM-13 based boards
+
+### Adafruit BLE SPI Friend
+Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF5182 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines:
+* #define AdafruitBleResetPin D4
+* #define AdafruitBleCSPin    B4
+* #define AdafruitBleIRQPin   E6
+
+A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip.
+
+## Adafruit EZ-Key hid
 This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will.
 
+
 <!-- FIXME: Document bluetooth support more completely. -->
+## Bluetooth Rules.mk Options
+Use only one of these
+* BLUETOOTH_ENABLE = yes (Legacy Option)
+* BLUETOOTH = RN42
+* BLUETOOTH = AdafruitEZKey
+* BLUETOOTH = AdafruitBLE
 
 ## Bluetooth Keycodes
 

docs/feature_unicode.md

@@ -4,45 +4,108 @@ There are three Unicode keymap definition method available in QMK:
 
 ## UNICODE_ENABLE
 
-Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in
-keymap file, where *n* is a 4 digit hexadecimal.
+Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in keymap file, where *n* is a 4 digit hexadecimal.
 
 ## UNICODEMAP_ENABLE
 
-Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping
-table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file.
-The keycode function is `X(n)` where *n* is the array index of the mapping
-table.
+Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(n)` where *n* is the array index of the mapping table.
+
+And you may want to have an enum to make reference easier.  So you'd want to add something like this to your keymap:
+
+```c
+enum unicode_name {
+  BANG, // ‽
+  IRONY, // ⸮
+  SNEK // snke 🐍
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+  [BANG]      = 0x0203D, // ‽
+  [IRONY]     = 0x02E2E, // ⸮
+  [SNEK]      = 0x1F40D // snke 🐍
+}:
+```
+
+Make sure that the order for both matches.
 
 ## UCIS_ENABLE
 
-TBD
+Supports Unicode up to 0xFFFFFFFF. As with `UNICODE_MAP`, you may want to main a mapping table in your keymap file.  However, there is no keycodes for this feature, you will have to add a keycode or function to call `qk_ucis_start()`. Once you've run that, you can just type the text for your unicode, and then hit space or enter to complete it, or ESC to cancel it. And if it matches an entry in your table, it will automatically "backspace" the trigger word (from your table) and then will input the unicode sequence.
 
-Unicode input in QMK works by inputing a sequence of characters to the OS,
+For instance, you would need to have a table like this in your keymap:
+
+```c
+const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
+(
+ UCIS_SYM("poop", 0x1f4a9),
+ UCIS_SYM("rofl", 0x1f923),
+ UCIS_SYM("kiss", 0x1f619)
+);
+```
+
+You run the function, and then type "rofl" and hit enter, it should backspace remove "rofl" and input the `0x1f923` unicode.
+
+### Customization
+
+There are several functions that you can add to your keymap to customize the functionality of this feature.
+
+* `void qk_ucis_start_user(void)` - This runs when you run the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
+* `void qk_ucis_success(uint8_t symbol_index)` - This runs when the unicode input has matched something, and has completed. Default doesn't do anything.
+* `void qk_ucis_symbol_fallback (void)` - This runs if the input text doesn't match anything.  The default function falls back to trying that input as a unicode code.
+
+The default code for these are:
+
+```c
+void qk_ucis_start_user(void) { // outputs keyboard emoji
+  unicode_input_start();
+  register_hex(0x2328);
+  unicode_input_finish();
+}
+
+void qk_ucis_success(uint8_t symbol_index) {
+}
+
+void qk_ucis_symbol_fallback (void) { // falls back to manual unicode entry
+  for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) {
+    uint8_t code = qk_ucis_state.codes[i];
+    register_code(code);
+    unregister_code(code);
+    wait_ms(UNICODE_TYPE_DELAY);
+  }
+}
+```
+
+## Unicode Input methods
+
+Unicode input in QMK works by inputting a sequence of characters to the OS,
 sort of like macro. Unfortunately, each OS has different ideas on how Unicode is input.
 
 This is the current list of Unicode input method in QMK:
 
-* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
-* UC_OSX_RALT: Same as UC_OSX, but sends the Right Alt key for unicode input
-* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
-* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
-* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
+* __UC_OSX__: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
+* __UC_OSX_RALT__: Same as UC_OSX, but sends the Right Alt key for unicode input
+* __UC_LNX__: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
+* __UC_WIN__: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
+* __UC_WINC__: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
 
-To type multiple characters for things like (ノಠ痊ಠ)ノ彡┻━┻, you can use `send_unicode_hex_string()` much like `SEND_STRING()` except you would use hex values seperated by spaces.
+At some point, you need to call `set_unicode_input_mode(x)` to set the correct unicode method.  This sets the method that is used to send the unicode, and stores it in EEPROM, so you only need to call this once.
+
+## `send_unicode_hex_string`
+
+To type multiple characters for things like (ノಠ痊ಠ)ノ彡┻━┻, you can use `send_unicode_hex_string()` much like `SEND_STRING()` except you would use hex values separate by spaces.
 For example, the table flip seen above would be `send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B")`
 
 There are many ways to get a hex code, but an easy one is [this site](https://r12a.github.io/app-conversion/). Just make sure to convert to hexadecimal, and that is your string.
 
-# Additional Language Support
+## Additional Language Support
 
 In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware.
 
-# International Characters on Windows
+## International Characters on Windows
 
-[AutoHotkey](https://autohotkey.com) allows Windows users to create custom hotkeys among others.
+### AutoHotkey allows Windows users to create custom hotkeys among others.
 
-The method does not require Unicode support in the keyboard itself but depends instead of AutoHotkey running in the background.
+The method does not require Unicode support in the keyboard itself but depends instead of [AutoHotkey](https://autohotkey.com) running in the background.
 
 First you need to select a modifier combination that is not in use by any of your programs.
 CtrlAltWin is not used very widely and should therefore be perfect for this.
@@ -57,3 +120,11 @@ In the default script of AutoHotkey you can define custom hotkeys.
 
 The hotkeys above are for the combination CtrlAltGui and CtrlAltGuiShift plus the letter a.
 AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
+
+### US International
+
+If you enable the US International layout on the system, it will use punctuation to accent the characters. 
+
+For instance, typing "`a" will result in à.
+
+You can find details on how to enable this [here](https://support.microsoft.com/en-us/help/17424/windows-change-keyboard-layout).

drivers/avr/i2c_master.c

@@ -8,7 +8,9 @@
 #include "i2c_master.h"
 #include "timer.h"
 
+#ifndef F_SCL
 #define F_SCL 400000UL // SCL frequency
+#endif
 #define Prescaler 1
 #define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
 

keyboards/68keys/68keys.c

@@ -0,0 +1,6 @@
+#include "68keys.h"
+
+void matrix_init_kb(void)
+{
+	matrix_init_user();
+}

keyboards/68keys/68keys.h

@@ -0,0 +1,20 @@
+#include "quantum.h"
+
+#define LAYOUT_68_ansi(                                                             \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, K16, \
+    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, K33, K34, \
+    K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48,                \
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63,                \
+    K64, K65, K66, K67, K68, K70, K71, K72, K73, K74)                               \
+    {                                                                               \
+        {K00, K01, K02, K03, K04, K05, K06, K07, K08},                              \
+            {K10, K11, K12, K13, K14, K15, K16, K17, K18},                          \
+            {K20, K21, K22, K23, K24, K25, K26, K27, K28},                          \
+            {K30, K31, K32, K33, K34, K35, K36, K37, K38},                          \
+            {K40, K41, K42, K43, K44, K45, K46, K47, K48},                          \
+            {K50, K51, K52, K53, K54, K55, K56, K57, K58},                          \
+            {K60, K61, K62, K63, K64, K65, K66, K67, K68},                          \
+        {                                                                           \
+            K70, K71, K72, K73, K74                                                 \
+        }                                                                           \
+    }

keyboards/68keys/README.md

@@ -0,0 +1,23 @@
+# 68Keys.io
+
+Custom [68Keys.io](https://68keys.io) DIY keyboard.
+
+Keyboard Maintainer: [sbstjn](https://sbstjn.com)  
+Hardware Supported: Pro Micro  
+Hardware Availability: [DIY Guide](https://68keys.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+```bash
+$ > cd qmk_firmware/
+$ > make 68keys:default
+```
+
+Example of flashing this keyboard:
+
+```bash
+$ > cd qmk_firmware/
+$ > make 68keys:default:avrdude
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/68keys/config.h

@@ -0,0 +1,42 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0A0C
+#define DEVICE_VER 0x0068
+#define MANUFACTURER 68Keys.io
+#define PRODUCT The 68Keys.io Keyboard
+#define DESCRIPTION A 68 keys mechanical keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 9
+
+#define MATRIX_ROW_PINS                \
+    {                                  \
+        B6, B2, B3, B1, F7, F6, F5, F4 \
+    }
+#define MATRIX_COL_PINS                    \
+    {                                      \
+        D3, D2, D1, D0, D4, C6, D7, E6, B4 \
+    }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/68keys/info.json

@@ -0,0 +1,81 @@
+{
+  "keyboard_name": "68Keys.io",
+  "url": "https://68keys.io",
+  "maintainer": "qmk",
+  "width": 17.25,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_68_ansi": {
+      "layout": [
+        { "label": "~", "x": 0, "y": 0 },
+        { "label": "!", "x": 1, "y": 0 },
+        { "label": "@", "x": 2, "y": 0 },
+        { "label": "#", "x": 3, "y": 0 },
+        { "label": "$", "x": 4, "y": 0 },
+        { "label": "%", "x": 5, "y": 0 },
+        { "label": "^", "x": 6, "y": 0 },
+        { "label": "&", "x": 7, "y": 0 },
+        { "label": "*", "x": 8, "y": 0 },
+        { "label": "(", "x": 9, "y": 0 },
+        { "label": ")", "x": 10, "y": 0 },
+        { "label": "_", "x": 11, "y": 0 },
+        { "label": "+", "x": 12, "y": 0 },
+        { "label": "Backspace", "x": 13, "y": 0, "w": 2 },
+        { "label": "ESC", "x": 15.25, "y": 0 },
+        { "label": "PGUP", "x": 16.25, "y": 0 },
+        { "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
+        { "label": "Q", "x": 1.5, "y": 1 },
+        { "label": "W", "x": 2.5, "y": 1 },
+        { "label": "E", "x": 3.5, "y": 1 },
+        { "label": "R", "x": 4.5, "y": 1 },
+        { "label": "T", "x": 5.5, "y": 1 },
+        { "label": "Y", "x": 6.5, "y": 1 },
+        { "label": "U", "x": 7.5, "y": 1 },
+        { "label": "I", "x": 8.5, "y": 1 },
+        { "label": "O", "x": 9.5, "y": 1 },
+        { "label": "P", "x": 10.5, "y": 1 },
+        { "label": "{", "x": 11.5, "y": 1 },
+        { "label": "}", "x": 12.5, "y": 1 },
+        { "label": "|", "x": 13.5, "y": 1, "w": 1.5 },
+        { "label": "DEL", "x": 15.25, "y": 1 },
+        { "label": "PGDN", "x": 16.25, "y": 1 },
+        { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 },
+        { "label": "A", "x": 1.75, "y": 2 },
+        { "label": "S", "x": 2.75, "y": 2 },
+        { "label": "D", "x": 3.75, "y": 2 },
+        { "label": "F", "x": 4.75, "y": 2 },
+        { "label": "G", "x": 5.75, "y": 2 },
+        { "label": "H", "x": 6.75, "y": 2 },
+        { "label": "J", "x": 7.75, "y": 2 },
+        { "label": "K", "x": 8.75, "y": 2 },
+        { "label": "L", "x": 9.75, "y": 2 },
+        { "label": ":", "x": 10.75, "y": 2 },
+        { "label": "\"", "x": 11.75, "y": 2 },
+        { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 },
+        { "label": "Shift", "x": 0, "y": 3, "w": 2.25 },
+        { "label": "Z", "x": 2.25, "y": 3 },
+        { "label": "X", "x": 3.25, "y": 3 },
+        { "label": "C", "x": 4.25, "y": 3 },
+        { "label": "V", "x": 5.25, "y": 3 },
+        { "label": "B", "x": 6.25, "y": 3 },
+        { "label": "N", "x": 7.25, "y": 3 },
+        { "label": "M", "x": 8.25, "y": 3 },
+        { "label": "<", "x": 9.25, "y": 3 },
+        { "label": ">", "x": 10.25, "y": 3 },
+        { "label": "?", "x": 11.25, "y": 3 },
+        { "label": "Shift", "x": 12.25, "y": 3, "w": 2.75 },
+        { "x": 15.25, "y": 3 },
+        { "label": "CTRL", "x": 0, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 1.25, "y": 4, "w": 1.25 },
+        { "label": "GUI", "x": 2.5, "y": 4, "w": 1.25 },
+        { "x": 3.75, "y": 4, "w": 6.25 },
+        { "label": "GUI", "x": 10, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 11.25, "y": 4, "w": 1.25 },
+        { "label": "CTRL", "x": 12.5, "y": 4, "w": 1.25 },
+        { "x": 14.25, "y": 4 },
+        { "x": 15.25, "y": 4 },
+        { "x": 16.25, "y": 4 }
+      ]
+    }
+  }
+}

keyboards/68keys/keymaps/default/keymap.c

@@ -0,0 +1,10 @@
+#include QMK_KEYBOARD_H
+#include "68keys.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_68_ansi(
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, KC_PGUP,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN,
+        KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+        KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)};

keyboards/68keys/rules.mk

@@ -0,0 +1,22 @@
+LAYOUTS = 68_ansi
+
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+BOOTLOADER = atmel-dfu
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration (+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys (+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control (+450)
+CONSOLE_ENABLE = no         # Console for debug (+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+

keyboards/baguette/baguette.c

@@ -0,0 +1,71 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "baguette.h"
+
+void bootmagic_lite(void)
+{
+	// The lite version of TMK's bootmagic made by Wilba.
+	// 100% less potential for accidentally making the
+	// keyboard do stupid things.
+
+	// We need multiple scans because debouncing can't be turned off.
+	matrix_scan();
+	wait_ms(DEBOUNCING_DELAY);
+	matrix_scan();
+
+	// If the Esc and space bar are held down on power up,
+	// reset the EEPROM valid state and jump to bootloader.
+	// Assumes Esc is at [0,0] and spacebar is at [4,7].
+	// This isn't very generalized, but we need something that doesn't
+	// rely on user's keymaps in firmware or EEPROM.
+	if ( ( matrix_get_row(0) & (1<<0) ) &&
+		( matrix_get_row(4) & (1<<7) ) )
+	{
+		// Set the TMK/QMK EEPROM state as invalid.
+		eeconfig_disable();
+		//eeprom_set_valid(false);
+		// Jump to bootloader.
+		bootloader_jump();
+	}
+}
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	bootmagic_lite();
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/baguette/baguette.h

@@ -0,0 +1,59 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef BAGUETTE_H
+#define BAGUETTE_H
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ansi( \
+        K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F, \
+        K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,          K1F, \
+        K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,          K2D,               \
+        K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,        \
+                      K42,   K43,                        K47,                        K4B,   K4C,   K4D,   K4E,   K4F  \
+) \
+{ \
+    {   K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F }, \
+    {   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D, KC_NO,   K1F }, \
+    {   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B, KC_NO,   K2D, KC_NO, KC_NO }, \
+    {   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E, KC_NO }, \
+    { KC_NO, KC_NO,   K42,   K43, KC_NO, KC_NO, KC_NO,   K47, KC_NO, KC_NO, KC_NO,   K4B,   K4C,   K4D,   K4E,   K4F }  \
+}
+
+#define LAYOUT_iso( \
+        K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F, \
+        K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,                 K1F, \
+        K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K1D,   K2D,               \
+        K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,        \
+                      K42,   K43,                        K47,                        K4B,   K4C,   K4D,   K4E,   K4F  \
+) \
+{ \
+    {   K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F }, \
+    {   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C, KC_NO, KC_NO,   K1F }, \
+    {   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K1D,   K2D, KC_NO, KC_NO }, \
+    {   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E, KC_NO }, \
+    { KC_NO, KC_NO,   K42,   K43, KC_NO, KC_NO, KC_NO,   K47, KC_NO, KC_NO, KC_NO,   K4B,   K4C,   K4D,   K4E,   K4F }  \
+}
+
+#endif

keyboards/baguette/config.h

@@ -0,0 +1,224 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x5050
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Yiancar
+#define PRODUCT         Baguette
+#define DESCRIPTION     A French Custom
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B2, B1, E6, D6 }
+#define MATRIX_COL_PINS { B6, C6, C7, F7, F6, F5, F4, F1, F0, B0, D0, D1, D2, D3, D5, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/baguette/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "Baguette", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "bootloader": "atmel-dfu", 
+    "width": 19.75, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_ansi": {
+            "layout": [{"label":"~", "x":3.25, "y":1.5}, {"label":"!", "x":4.25, "y":1.5}, {"label":"@", "x":5.25, "y":1.5}, {"label":"#", "x":6.25, "y":1.5}, {"label":"$", "x":7.25, "y":1.5}, {"label":"%", "x":8.25, "y":1.5}, {"label":"^", "x":9.25, "y":1.5}, {"label":"&", "x":10.25, "y":1.5}, {"label":"*", "x":11.25, "y":1.5}, {"label":"(", "x":12.25, "y":1.5}, {"label":")", "x":13.25, "y":1.5}, {"label":"_", "x":14.25, "y":1.5}, {"label":"+", "x":15.25, "y":1.5}, {"label":"|", "x":16.25, "y":1.5}, {"label":"Del", "x":17.25, "y":1.5}, {"label":"Insert", "x":18.75, "y":1.5}, {"label":"Tab", "x":3.25, "y":2.5, "w":1.5}, {"label":"Q", "x":4.75, "y":2.5}, {"label":"W", "x":5.75, "y":2.5}, {"label":"E", "x":6.75, "y":2.5}, {"label":"R", "x":7.75, "y":2.5}, {"label":"T", "x":8.75, "y":2.5}, {"label":"Y", "x":9.75, "y":2.5}, {"label":"U", "x":10.75, "y":2.5}, {"label":"I", "x":11.75, "y":2.5}, {"label":"O", "x":12.75, "y":2.5}, {"label":"P", "x":13.75, "y":2.5}, {"label":"{", "x":14.75, "y":2.5}, {"label":"}", "x":15.75, "y":2.5}, {"label":"|", "x":16.75, "y":2.5, "w":1.5}, {"label":"Delete", "x":18.75, "y":2.5}, {"label":"Control", "x":3.25, "y":3.5, "w":1.75}, {"label":"A", "x":5, "y":3.5}, {"label":"S", "x":6, "y":3.5}, {"label":"D", "x":7, "y":3.5}, {"label":"F", "x":8, "y":3.5}, {"label":"G", "x":9, "y":3.5}, {"label":"H", "x":10, "y":3.5}, {"label":"J", "x":11, "y":3.5}, {"label":"K", "x":12, "y":3.5}, {"label":"L", "x":13, "y":3.5}, {"label":":", "x":14, "y":3.5}, {"label":"\"", "x":15, "y":3.5}, {"label":"Enter", "x":16, "y":3.5, "w":2.25}, {"x":3.25, "y":4.5, "w":1.25}, {"x":4.5, "y":4.5}, {"label":"Z", "x":5.5, "y":4.5}, {"label":"X", "x":6.5, "y":4.5}, {"label":"C", "x":7.5, "y":4.5}, {"label":"V", "x":8.5, "y":4.5}, {"label":"B", "x":9.5, "y":4.5}, {"label":"N", "x":10.5, "y":4.5}, {"label":"M", "x":11.5, "y":4.5}, {"label":"<", "x":12.5, "y":4.5}, {"label":">", "x":13.5, "y":4.5}, {"label":"?", "x":14.5, "y":4.5}, {"x":15.5, "y":4.5}, {"label":"Shift", "x":16.5, "y":4.5, "w":1.25}, {"label":"\u2191", "x":17.75, "y":4.5}, {"label":"Win", "x":4.5, "y":5.5}, {"label":"Alt", "x":5.5, "y":5.5, "w":1.25}, {"x":6.75, "y":5.5, "w":6.25}, {"label":"Ctrl", "x":13, "y":5.5, "w":1.25}, {"label":"Fn", "x":14.25, "y":5.5}, {"label":"\u2190", "x":16.75, "y":5.5}, {"label":"\u2193", "x":17.75, "y":5.5}, {"label":"\u2192", "x":18.75, "y":5.5}]
+        },
+        "LAYOUT_iso": {
+            "layout": [{"label":"~", "x":3.25, "y":1.5}, {"label":"!", "x":4.25, "y":1.5}, {"label":"@", "x":5.25, "y":1.5}, {"label":"#", "x":6.25, "y":1.5}, {"label":"$", "x":7.25, "y":1.5}, {"label":"%", "x":8.25, "y":1.5}, {"label":"^", "x":9.25, "y":1.5}, {"label":"&", "x":10.25, "y":1.5}, {"label":"*", "x":11.25, "y":1.5}, {"label":"(", "x":12.25, "y":1.5}, {"label":")", "x":13.25, "y":1.5}, {"label":"_", "x":14.25, "y":1.5}, {"label":"+", "x":15.25, "y":1.5}, {"label":"|", "x":16.25, "y":1.5}, {"label":"Del", "x":17.25, "y":1.5}, {"label":"Insert", "x":18.75, "y":1.5}, {"label":"Tab", "x":3.25, "y":2.5, "w":1.5}, {"label":"Q", "x":4.75, "y":2.5}, {"label":"W", "x":5.75, "y":2.5}, {"label":"E", "x":6.75, "y":2.5}, {"label":"R", "x":7.75, "y":2.5}, {"label":"T", "x":8.75, "y":2.5}, {"label":"Y", "x":9.75, "y":2.5}, {"label":"U", "x":10.75, "y":2.5}, {"label":"I", "x":11.75, "y":2.5}, {"label":"O", "x":12.75, "y":2.5}, {"label":"P", "x":13.75, "y":2.5}, {"label":"{", "x":14.75, "y":2.5}, {"label":"}", "x":15.75, "y":2.5}, {"label":"Enter", "x":17, "y":2.5, "w":1.25, "h":2}, {"label":"Delete", "x":18.75, "y":2.5}, {"label":"Control", "x":3.25, "y":3.5, "w":1.75}, {"label":"A", "x":5, "y":3.5}, {"label":"S", "x":6, "y":3.5}, {"label":"D", "x":7, "y":3.5}, {"label":"F", "x":8, "y":3.5}, {"label":"G", "x":9, "y":3.5}, {"label":"H", "x":10, "y":3.5}, {"label":"J", "x":11, "y":3.5}, {"label":"K", "x":12, "y":3.5}, {"label":"L", "x":13, "y":3.5}, {"label":":", "x":14, "y":3.5}, {"label":"\"", "x":15, "y":3.5}, {"x":16, "y":3.5}, {"x":3.25, "y":4.5, "w":1.25}, {"x":4.5, "y":4.5}, {"label":"Z", "x":5.5, "y":4.5}, {"label":"X", "x":6.5, "y":4.5}, {"label":"C", "x":7.5, "y":4.5}, {"label":"V", "x":8.5, "y":4.5}, {"label":"B", "x":9.5, "y":4.5}, {"label":"N", "x":10.5, "y":4.5}, {"label":"M", "x":11.5, "y":4.5}, {"label":"<", "x":12.5, "y":4.5}, {"label":">", "x":13.5, "y":4.5}, {"label":"?", "x":14.5, "y":4.5}, {"x":15.5, "y":4.5}, {"label":"Shift", "x":16.5, "y":4.5, "w":1.25}, {"label":"\u2191", "x":17.75, "y":4.5}, {"label":"Win", "x":4.5, "y":5.5}, {"label":"Alt", "x":5.5, "y":5.5, "w":1.25}, {"x":6.75, "y":5.5, "w":6.25}, {"label":"Ctrl", "x":13, "y":5.5, "w":1.25}, {"label":"Fn", "x":14.25, "y":5.5}, {"label":"\u2190", "x":16.75, "y":5.5}, {"label":"\u2193", "x":17.75, "y":5.5}, {"label":"\u2192", "x":18.75, "y":5.5}]
+        }
+    }
+}

keyboards/baguette/keymaps/default/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ansi( /* Base */
+    KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,  KC_BSPC,  KC_TRNS,  KC_INS,\
+    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC, KC_BSLS,            KC_DEL,\
+    KC_CAPS,  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,           KC_ENT,                    \
+    KC_LSFT,  KC_TRNS,  KC_Z,     KC_X,  KC_C,  KC_V,  KC_B,    KC_N,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_TRNS, KC_RSFT,  KC_UP,           \
+                     KC_LGUI,  KC_LALT,                       KC_SPC,                             KC_RCTL,  MO(1),   KC_LEFT, KC_DOWN,  KC_RGHT),
+
+[1] = LAYOUT_ansi( /* FN */
+    KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,  KC_TRNS,  KC_TRNS,  KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET,   KC_TRNS,            KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,           KC_TRNS,                    \
+    KC_TRNS,  KC_TRNS,  BL_TOGG,  BL_STEP,  BL_BRTG,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          \
+                        KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_RCTL,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS),
+};
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/baguette/keymaps/default/readme.md

@@ -0,0 +1,9 @@
+# The default ANSI keymap for baguette
+
+Typical ANSI keymap. Please note:
+- Left key from split backspace is connected to 2u key.
+- Left key from split left Shift is connected to 2u key.
+- Right key from split right Shift is connected to 2u key.
+- Backlight control is on the Z, X and C keys of the FN layer.
+- Reset key combination is FN + ].
+- Holding ESC and Space while plugging in the USB erases the EEPROM.

keyboards/baguette/keymaps/iso/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_iso( /* Base */
+    KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,  KC_BSPC,  KC_TRNS,  KC_INS,\
+    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,                     KC_DEL,\
+    KC_CAPS,  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_QUOT, KC_ENT,                    \
+    KC_LSFT,  KC_TRNS,  KC_Z,     KC_X,  KC_C,  KC_V,  KC_B,    KC_N,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_TRNS, KC_RSFT,  KC_UP,           \
+              KC_LGUI,  KC_LALT,                       KC_SPC,                          KC_RCTL,  MO(1),    KC_LEFT, KC_DOWN,  KC_RGHT),
+
+[0] = LAYOUT_iso( /* FN */
+    KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,  KC_TRNS,  KC_TRNS,  KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET,   KC_TRNS,            KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,           KC_TRNS,                    \
+    KC_TRNS,  KC_TRNS,  BL_TOGG,  BL_STEP,  BL_BRTG,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          \
+              KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_RCTL,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS),
+};
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/baguette/keymaps/iso/readme.md

@@ -0,0 +1,10 @@
+# The default ISO keymap for baguette
+
+Typical ISO keymap. Please note:
+- Left key from split backspace is connected to 2u key.
+- Left key from split left Shift is connected to 2u key.
+- Right key from split right Shift is connected to 2u key.
+- Backlight control is on the Z, X and C keys of the FN layer.
+- Reset key combination is FN + ].
+- Holding ESC and Space while plugging in the USB erases the EEPROM.
+

keyboards/baguette/readme.md

@@ -0,0 +1,16 @@
+Baguette
+========
+
+![Baguette](https://cdn.discordapp.com/attachments/426880953143525384/479788409263489035/scecre2.png)
+
+This is a custom keyboard with backlight inspired by France.
+
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Hardware Supported: ATMEGA 32u4 MCU with backlight support.
+Hardware Availability: Closed group-buy please contact the runners (Tesletron and Enjoy)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make baguette:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/baguette/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/bmini/bmini.h

@@ -38,6 +38,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
 }
 
+#define LAYOUT_splitbs( \
+  K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD4, KD0, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2,           KE0, \
+  K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,           K86, K77, \
+  K00, K10, K20,           K56,                     K57, KB0, KC0, K66, K76, K96  \
+){ \
+  { K00, K10,   K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0,   KD0,   KE0   }, \
+  { K01, K11,   K21, K31,   K41,   K51,   KC_NO, KC_NO, KC_NO, KC_NO, KA1,   KB1, KC_NO, KD1,   KE1   }, \
+  { K02, K12,   K22, K32,   K42,   K52,   KC_NO, KC_NO, KC_NO, KC_NO, KA2,   KB2, KC_NO, KD2,   KE2   }, \
+  { K03, K13,   K23, K33,   K43,   K53,   KC_NO, KC_NO, KC_NO, KC_NO, KA3,   KB3, KC3,   KD3,   KC_NO }, \
+  { K04, K14,   K24, K34,   K44,   K54,   KC_NO, KC_NO, KC_NO, KC_NO, KA4,   KB4, KC4,   KD4,   KE4   }, \
+  { K05, KC_NO, K25, K35,   K45,   K55,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5,   KD5,   KE5   }, \
+  { K06, K16,   K26, K36,   K46,   K56,   K66,   K76,   K86,   K96,   KA6,   KB6, KC6,   KD6,   KE6   }, \
+  { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
+}
+
 #define LAYOUT_kc( \
     K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
     K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, \

keyboards/bmini/info.json

@@ -8,6 +8,10 @@
     "LAYOUT": {
       "key_count": 84,
       "layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1, "w":2}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K10", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":6.25}, {"label":"K57", "x":10, "y":5}, {"label":"KB0", "x":11, "y":5}, {"label":"KC0", "x":12, "y":5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
+    },
+    "LAYOUT_splitbs": {
+      "key_count": 85,
+      "layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1}, {"label":"KD4", "x":14, "y":1}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K10", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":6.25}, {"label":"K57", "x":10, "y":5}, {"label":"KB0", "x":11, "y":5}, {"label":"KC0", "x":12, "y":5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
     }
   }
 }

keyboards/dc01/left/config.h

@@ -46,6 +46,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F1, F0, F7, F6, F5 }
 #define UNUSED_PINS
 
+#define F_SCL 300000UL
+
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/dc01/left/matrix.c

@@ -43,7 +43,7 @@ static uint8_t error_count_arrow = 0;
 /* Set 0 if debouncing isn't needed */
 
 #ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
+#    define DEBOUNCING_DELAY 5
 #endif
 
 #if (DEBOUNCING_DELAY > 0)
@@ -135,10 +135,7 @@ uint8_t matrix_cols(void) {
     return MATRIX_COLS;
 }
 
-
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset);
-//uint8_t i2c_transaction_numpad(void);
-//uint8_t i2c_transaction_arrow(void);
 
 //this replases tmk code
 void matrix_setup(void){
@@ -220,7 +217,7 @@ uint8_t matrix_scan(void)
                 matrix[i] &= 0x3F; //mask bits to keep
             }
         }
-    }else{ //no error
+   }else{ //no error
         error_count_right = 0;
     }
     
@@ -440,40 +437,28 @@ static void unselect_cols(void)
 // Complete rows from other modules over i2c
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset) {
     i2c_status_t err = i2c_start((address << 1) | I2C_WRITE, 10);
-    if (err) return err;
-    i2c_write(0x01, 10);
-    if (err) return err;
+    i2c_write(0x01, 10); //request data in address 1
 
-    i2c_start((address << 1) | I2C_READ, 10);
-    if (err) return err;
+    i2c_start((address << 1) | I2C_READ, 5);
 
     err = i2c_read_ack(10);
     if (err == 0x55) { //synchronization byte
 
-    for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
-        matrix[i] &= mask; //mask bits to keep
-        err = i2c_read_ack(10);
-        if (err >= 0) {
-            matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-             return err;
-        }
-      }
-    //last read request must be followed by a NACK
-    matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
-    err = i2c_read_nack(10);
-    if (err >= 0) {
+        for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
+            matrix[i] &= mask; //mask bits to keep
+            err = i2c_read_ack(10);
+                matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
+            }
+        //last read request must be followed by a NACK
+        matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
+        err = i2c_read_nack(10);
         matrix[MATRIX_ROWS - 1] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-            return err;
-        }
+
     } else {
         i2c_stop(10);
         return 1;
     }
 
     i2c_stop(10);
-    if (err) return err;
-
     return 0;
 }

keyboards/dz60/dz60.h

@@ -70,7 +70,7 @@
  * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
  * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
  * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
- * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──────┬┴───┴┬───┬─┴───┤
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤
  * │▓▓▓▓▓│41 │43   │46 (7u)                    │4b   │4d │▓▓▓▓▓│
  * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
 */
@@ -224,4 +224,58 @@
     { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a,  k4b,  k4c,   k4d,   k4e   }  \
 }
 
+/* LAYOUT_60_b_ansi (maximized DZ60 Plate B layout for ANSI)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3c    │3d │3e │
+ * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_b_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a,      k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  KC_NO, k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  KC_NO, k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
+/* LAYOUT_60_b_iso (maximized DZ60 Plate B layout for ISO)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬──┴────┤
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3c    │3d │3e │
+ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_b_iso( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a,      k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  KC_NO, k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
 #endif

keyboards/dz60/info.json

@@ -36,6 +36,14 @@
     "LAYOUT_60_iso_5x1u": {
       "key_count": 63,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"|", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"~", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"↑", "x":13, "y":4}, {"label":"→", "x":14, "y":4}]
+    },
+    "LAYOUT_60_b_ansi": {
+      "key_count": 66,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"\\", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
+    },
+    "LAYOUT_60_b_iso": {
+      "key_count": 67,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"#", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
     }
   }
 }

keyboards/dz60/keymaps/thomasviaud/README.md

@@ -0,0 +1,4 @@
+## French ISO Layout
+
+Here is a very simple version of a French ISO Layout (handled by OS).
+Feel free to take this as base for your own layout.

keyboards/dz60/keymaps/thomasviaud/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_60_iso(
+		KC_ESC,		KC_1, 		KC_2, 		KC_3, 		KC_4, 		KC_5, 		KC_6, 		KC_7, 		KC_8, 		KC_9, 		KC_0, 		KC_MINS, 	KC_EQL, 	     			KC_BSPC,
+		KC_TAB,					 		KC_Q,			KC_W, 		KC_E, 		KC_R, 		KC_T, 		KC_Y, 		KC_U, 		KC_I, 		KC_O, 		KC_P, 		KC_LBRC, 	KC_RBRC,	
+		KC_CAPS, 						KC_A, 		KC_S, 		KC_D,			KC_F,			KC_G,			KC_H,			KC_J,			KC_K, 		KC_L,			KC_SCLN,	KC_QUOT,  KC_NUHS	,	KC_ENT,
+		KC_LSFT, 	KC_NUBS,	KC_Z, 		KC_X,			KC_C, 		KC_V, 		KC_B, 		KC_N, 		KC_M, 		KC_COMM, 	KC_DOT, 	KC_SLSH, 						KC_RSFT,
+		KC_LCTL, 	KC_LGUI,						KC_LALT, 											KC_SPC, 																KC_RALT, 	KC_RGUI, 					 	MO(1), 		KC_RCTL),
+
+	LAYOUT_60_iso(
+		KC_GRV,		KC_F1, 		KC_F2, 		KC_F3, 		KC_F4, 		KC_F5, 		KC_F6, 		KC_F7, 		KC_F8, 		KC_F9, 		KC_F10, 	KC_F11, 	KC_F12,	      			KC_DEL,
+		_______,					 	_______, 	KC_UP, 		_______, 	_______, 	_______, 	_______, 	_______, 	_______, 	_______, 	_______,  _______, _______,	
+		_______, 						KC_LEFT, 	KC_DOWN, 	KC_RIGHT,	_______,	_______,	_______,	_______,	_______, 	_______,	_______,	_______, _______,		_______,
+		_______, 	_______,	RGB_TOG, 	RGB_MOD, 	RGB_HUI, 	RGB_HUD, 	RGB_SAI, 	RGB_SAD, 	RGB_VAI, 	RGB_VAD, 	_______, 	_______, 					 _______,
+		_______, 	_______,						_______, 											RESET, 																  _______, 	_______, 					 _______, 	_______),
+};

keyboards/e6v2/le/info.json

@@ -8,9 +8,12 @@
         "LAYOUT": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.75}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.25}, {"label":"Win", "x":3, "y":4, "w":1.25}, {"label":"Alt", "x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4, "w":2.75}, {"x":8.25, "y":4, "w":1.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
         },
-
         "LAYOUT_60_ansi": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+        "LAYOUT_60_hhkb": {
+            "key_count": 60,
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"\\", "x":13, "y":0}, {"label":"`", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
         }
     }
-}
+}

keyboards/e6v2/le/keymaps/johu/keymap.c

@@ -0,0 +1,98 @@
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+#define _SL 2
+#define _CL 3
+
+// Tap dance defines
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define HPR_TAB     ALL_T(KC_TAB)               // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt)
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+#define KC_SPFN     LT(_SL, KC_SPC)             // Tap for space, hold for function layer (aka SpaceFN)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Layer 0: Base layer (Default layer)
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+ * |-----------------------------------------------------------------------------------------+
+ * |Tab/Hyper|  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl/Esc  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | Shift/Ent | FN  |
+ * |-----------------------------------------------------------------------------------------+
+ *           |LGUI | LAlt  |               Space                   | RAlt   |RGUI |
+ *           `--------------------------------------------------------------------'
+ */
+  [_BL] = LAYOUT_60_hhkb(
+      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+      HPR_TAB, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+      CTL_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          SFT_ENT, MO(_FL),
+               KC_LGUI, KC_LALT,                       KC_SPFN,                        KC_RALT, KC_RGUI
+      ),
+
+/* Layer 1: FN Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |  CL | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |        |     |     |     |     |     |     |     | Psc | Slck| Paus| Up  |     | Del    |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *           |       |       |                                    | Stop  |  CL   |
+ *           `--------------------------------------------------------------------'
+ */
+  [_FL] = LAYOUT_60_hhkb(
+      TG(_CL),  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+       _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   _______, KC_DEL,
+       _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
+       _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN,          _______, _______,
+                _______, _______,                       _______,                        KC_MSTP, MO(_CL)
+      ),
+
+/* Layer 2: Space FN Layer
+* ,-----------------------------------------------------------------------------------------.
+* |  CL | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+* |-----------------------------------------------------------------------------------------+
+* |        |     |     |     |     |     |     | PgUp|     | PgDn|     |     |     | Del    |
+* |-----------------------------------------------------------------------------------------+
+* |         | Vol-| Vol+| Mute|     |     | Left| Down| Up  |Right|     |     |             |
+* |-----------------------------------------------------------------------------------------+
+* |           | Prev| Play| Next|     |     | Home| End |     |     |     |           |     |
+* |-----------------------------------------------------------------------------------------+
+*            |       |       |                                    |       |  CL   |
+*            `--------------------------------------------------------------------'
+*/
+  [_SL] = LAYOUT_60_hhkb(
+      TG(_CL), KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+      _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, KC_PGDN, _______, _______, _______, KC_DEL,
+      _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, _______,
+      _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_END,  _______, _______, _______,          _______, _______,
+               _______, _______,                        _______,                       _______, MO(_CL)
+      ),
+
+/* Layer 3: Control Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |        | BL- | BL+ | BL  |     |     |     |     |     |     |     |     |     | RESET  |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | RGBT| RGBM|     |     |     |     |     |     |     |     |     |             |
+ * |-----------------------------------------------------------------------------------------+
+ * |  CAPS     | Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |      |    |     |           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *           |       |       |                                     |       |      |
+ *           `--------------------------------------------------------------------'
+ */
+  [_CL] = LAYOUT_60_hhkb(
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______,
+      _______, BL_TOGG, BL_STEP, BL_DEC,  BL_INC,  _______, _______, _______, _______, _______,  _______, _______, _______, RESET,
+      _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______,
+      KC_CAPS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______,  _______,          _______, _______,
+               _______, _______,                        _______,                       _______,  _______
+      )
+};

keyboards/e6v2/le/keymaps/johu/readme.md

@@ -0,0 +1,40 @@
+# johu's E6-V2 Last Edition (LE) HHKB
+Make example for this keyboard (after setting up your build environment):
+```bash
+$ make e6v2/le:johu
+```
+
+Or to make and flash:
+```bash
+$ make e6v2/le:johu:dfu
+```
+
+See the [build environment setup] and the [make instructions] for more
+information. Brand new to QMK? Start with our [Complete Newbs Guide].
+
+## Layer 0: Base Layer
+* HHKB Qwerty layout plus some specials:
+  * The Space key sends `Space` when tapped, toggles to *Space FN Layer* when held
+  * [Grave Escape]
+  * The Ctrl key sends `Esc` when tapped, `Ctrl` when held
+  * The Tab key sends `Tab` when tapped, [Hyper] (`Super+Ctrl+Alt+Shift`) when held
+  * The right Shift key sends `Enter` when tapped, `Shift` when held
+
+## Layer 1: Function Layer
+* Default HHKB function layer includig the iconic diamond arrow cluster
+* Multimedia controls
+
+## Layer 2: Space FN Layer
+* VIM style arrow cluster
+* Multimedia controls
+
+## Layer 3: Control Layer
+* Reset button
+* RGB controls
+* Caps Lock
+
+[build environment setup]: https://docs.qmk.fm/#/getting_started_build_tools
+[make instructions]: https://docs.qmk.fm/#/getting_started_make_guide
+[Complete Newbs Guide]: https://docs.qmk.fm/#/newbs
+[Grave Escape]: https://beta.docs.qmk.fm/features/feature_grave_esc
+[Hyper]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key

keyboards/e6v2/le/le.h

@@ -33,4 +33,32 @@
   { K40, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D, K4E   }, \
 }
 
+/* LAYOUT_60_hhkb
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e │0d │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c    │3e │
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──────┬┴───┴┬───┬─┴───┤
+ * │▓▓▓▓▓│42 │43   │47 (7u)                    │4b   │4d │▓▓▓▓▓│
+ * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
+*/
+#define LAYOUT_60_hhkb( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0D, \
+    K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,      K3E, \
+              K42, K43,                K47,                K4B,      K4D       \
+)\
+{\
+  { K00,   K01,   K02, K03, K04,   K05,   K06,   K07, K08,   K09,   K0A,   K0B, K0C,   K0D,   K0E   }, \
+  { K10,   KC_NO, K12, K13, K14,   K15,   K16,   K17, K18,   K19,   K1A,   K1B, K1C,   K1D,   K1E   }, \
+  { K20,   KC_NO, K22, K23, K24,   K25,   K26,   K27, K28,   K29,   K2A,   K2B, K2C,   K2D,   KC_NO }, \
+  { K30,   KC_NO, K32, K33, K34,   K35,   K36,   K37, K38,   K39,   K3A,   K3B, K3C,   KC_NO, K3E   }, \
+  { KC_NO, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, KC_NO, K4B, KC_NO, K4D,   KC_NO }, \
+}
+
 #endif

keyboards/e6v2/readme.md

@@ -17,4 +17,4 @@ The E6V2 has been available with either a bootmapper client or QMK powered PCB.
 
 Please use the appropriate version when making your firmware. Flashing one in place of the other, can brick your PCB. Please be certain whether you have a OE or LE  PCB. 
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ergodox_infinity/keymaps/input_club/keymap.c

@@ -93,7 +93,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                  |     |     |     |
  *                                  +-----+-----+-----+
  */
-       KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_TRNS,
+       KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F11,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
@@ -120,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *    |     |     |     |
  *    +-----+-----+-----+
  */
-       KC_TRNS, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_TRNS,
+       KC_F12,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/fc660c/keymaps/spacebarracecar/README.md

@@ -0,0 +1,4 @@
+# US International keymap for PCs with German set as input language
+
+This keymap emulates a US International layout including a deadkey layer on PCs that have German set as the input language. 
+This allows the use of the keyboard on any PC in Germany without the need of changing the input language.

keyboards/fc660c/keymaps/spacebarracecar/config.h

@@ -0,0 +1,9 @@
+#pragma once
+
+// higher value means deeper actuation point, less sensitive
+// be careful and only make small adjustments (steps of 1 or 2).
+// too high and keys will fail to actuate. too low and keys will actuate spontaneously.
+// test all keys before further adjustment.
+// this should probably stay in the range +/-5.
+#undef ACTUATION_DEPTH_ADJUSTMENT
+#define ACTUATION_DEPTH_ADJUSTMENT +2

keyboards/fc660c/keymaps/spacebarracecar/keymap.c

@@ -0,0 +1,38 @@
+#include QMK_KEYBOARD_H
+#include "spacebarracecar.h"
+
+enum layers {
+  _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_BASE] = LAYOUT(
+        KC_ESC, DE_1,   DE_2,   CU_3,   DE_4,   DE_5,   CU_6,   CU_7,   CU_8,   CU_9,   CU_0,   DE_MINS,CU_EQL, KC_BSPC,     KC_INS,
+        KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   CU_Z,   KC_U,   KC_I,   KC_O,   KC_P,   CU_LBRC,CU_RBRC,CU_BSLS,     KC_DEL,
+        CU_NAV, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   CU_SCLN,CU_QUOT,     KC_ENT,
+        CU_LSFT,CU_Y,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   CU_COMM,CU_DOT, CU_SLSH,CU_RSFT,     KC_UP,
+        KC_LCTL,KC_LGUI,KC_LALT,          KC_SPC,                       KC_RALT,KC_RGUI,KC_RCTL,     KC_LEFT,KC_DOWN,KC_RGHT
+    ),
+
+  [_DEADKEY] = LAYOUT(
+        CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  _______,     CU_ED,
+        _______,CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_UE,  CU_ED,  CU_OE,  CU_ED,  CU_ED,  CU_ED,  CU_ED,       CU_ED,
+        _______,CU_AE,  CU_SS,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_DDQ,      CU_DDQ ,
+        _______,CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  CU_ED,  _______,     _______,
+        _______,_______,_______,                CU_DDQ,                 _______,_______,_______,     _______,_______,_______
+    ),
+
+  [_NAV] = LAYOUT(
+        CU_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_DEL,      CU_GAME,
+        _______,KC_PGDN,KC_UP,  KC_PGUP,KC_HOME,XXXXXXX,XXXXXXX,XXXXXXX,GUIU,   XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,     CU_ESCT,
+        _______,KC_LEFT,KC_DOWN,KC_RGHT,KC_END, XXXXXXX,XXXXXXX,GUIL,   GUID,   GUIR,   XXXXXXX,XXXXXXX,     KC_ENT,
+        _______,KC_MPRV,KC_MPLY,KC_MNXT,KC_VOLD,KC_VOLU,KC_MUTE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,     KC_PGUP,
+        RESET,  _______,_______,                _______,                _______,_______,_______,     KC_HOME,KC_PGDN,KC_END
+    )
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return process_record_userspace(keycode, record);
+}

keyboards/fc660c/keymaps/spacebarracecar/rules.mk

@@ -0,0 +1,6 @@
+BOOTMAGIC_ENABLE = no           # Virtual DIP switch configuration(+1000)
+EXTRAKEY_ENABLE = yes           # Audio control and System control(+450)
+NKRO_ENABLE = no                # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+
+# Userspace defines
+GERMAN_ENABLE = yes             # Enable Custom US Ansi Keycodes for PC with German set as input language

keyboards/handwired/dactyl_manuform/4x5/keymaps/default/config.h

@@ -18,8 +18,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
 #include "../../config.h"
 
@@ -33,5 +32,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_LEFT
 // #define MASTER_RIGHT
 #define EE_HANDS
-
-#endif

keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/config.h

@@ -18,8 +18,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
 #include "../../config.h"
 
@@ -33,5 +32,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_LEFT
 // #define MASTER_RIGHT
 #define EE_HANDS
-
-#endif

keyboards/handwired/dactyl_manuform/4x6/4x6.c

@@ -0,0 +1,14 @@
+#include "4x6.h"
+
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+};
+

keyboards/handwired/dactyl_manuform/4x6/4x6.h

@@ -0,0 +1,36 @@
+#pragma once
+
+#include "dactyl_manuform.h"
+#include "quantum.h"
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+#define LAYOUT(\
+    L00, L01, L02, L03, L04, L05,                    R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15,                    R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25,                    R20, R21, R22, R23, R24, R25, \
+              L32, L33,                                        R32, R33,           \
+                        L34, L35,                    R30, R31,                     \
+                        L44, L45,                    R40, R41,                     \
+              L42, L43,                                        R42, R43            \
+    ) \
+    { \
+        { L00,   L01,   L02, L03, L04, L05 }, \
+        { L10,   L11,   L12, L13, L14, L15 }, \
+        { L20,   L21,   L22, L23, L24, L25 }, \
+        { KC_NO, KC_NO, L32, L33, L34, L35 }, \
+        { KC_NO, KC_NO, L42, L43, L44, L45 }, \
+\
+        { R00, R01, R02, R03, R04,   R05   }, \
+        { R10, R11, R12, R13, R14,   R15   }, \
+        { R20, R21, R22, R23, R24,   R25   }, \
+        { R30, R31, R32, R33, KC_NO, KC_NO }, \
+        { R40, R41, R42, R43, KC_NO, KC_NO } \
+\
+   }

keyboards/handwired/dactyl_manuform/4x6/config.h

@@ -0,0 +1,40 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    tshort
+#define DESCRIPTION     A split keyboard for the cheap makers
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 6
+
+// row-driven
+#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW

keyboards/handwired/dactyl_manuform/4x6/keymaps/default/config.h

@@ -0,0 +1,31 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS

keyboards/handwired/dactyl_manuform/4x6/keymaps/default/keymap.c

@@ -0,0 +1,87 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _BASE 0
+#define _RAISE 1
+#define _LOWER 2
+
+// Fillers to make layering more clear
+
+#define ____ KC_TRNS
+
+#define SFT_ESC  SFT_T(KC_ESC)
+#define CTL_BSPC CTL_T(KC_BSPC)
+#define ALT_SPC  ALT_T(KC_SPC)
+#define SFT_ENT  SFT_T(KC_ENT)
+
+#define KC_ML KC_MS_LEFT
+#define KC_MR KC_MS_RIGHT
+#define KC_MU KC_MS_UP
+#define KC_MD KC_MS_DOWN
+#define KC_MB1 KC_MS_BTN1
+#define KC_MB2 KC_MS_BTN1
+
+#define RAISE MO(_RAISE)
+#define LOWER MO(_LOWER)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Base (qwerty)
+ * +-----------------------------------------+                             +-----------------------------------------+
+ * | ESC  |   q  |   w  |   e  |   r  |   t  |                             |   y  |   u  |   i  |   o  |   p  |      |
+ * |------+------+------+------+------+------|                             |------+------+------+------+------+------|
+ * | TAB  |   a  |   s  |   d  |   f  |   g  |                             |   h  |   j  |   k  |   l  |   ;  |      |
+ * |------+------+------+------+------+------|                             |------+------+------+------+------+------|
+ * | SHFT |   z  |   x  |   c  |   v  |   b  |                             |   n  |   m  |   ,  |   .  |   /  |      |
+ * +------+------+------+------+-------------+                             +-------------+------+------+------+------+
+ *               |  [   |   ]  |                                                         |      |      |
+ *               +-------------+-------------+                             +-------------+-------------+
+ *                             |      |      |                             |      |      |
+ *                             |------+------|                             |------+------|
+ *                             |      |      |                             |      |      |
+ *                             +-------------+                             +-------------+
+ *                                           +-------------+ +-------------+
+ *                                           |      |      | |      |      |
+ *                                           |------+------| |------+------|
+ *                                           |      |      | |      |      |
+ *                                           +-------------+ +-------------+
+ */
+
+[_BASE] = LAYOUT( \
+    KC_ESC,  KC_Q,  KC_W,   KC_E,   KC_R,   KC_T,               KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_MINS,   \
+    KC_TAB,  KC_A,  KC_S,   KC_D,   KC_F,   KC_G,               KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,   \
+    KC_LSFT, KC_Z,  KC_X,   KC_C,   KC_V,   KC_B,               KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_BSLASH, \
+                    KC_LBRC,KC_RBRC,                                            KC_PLUS,KC_EQL,                    \
+                                    RAISE,  KC_SPC,             KC_ENT, LOWER,                                     \
+                                    KC_TAB, KC_HOME,            KC_END, KC_DEL,                                    \
+                                    KC_BSPC,KC_GRV,             KC_LGUI,KC_LALT                                    \
+),
+
+[_LOWER] = LAYOUT(
+    _______,_______,_______,_______,_______,KC_LBRC,            KC_RBRC, KC_P7, KC_P8,  KC_P9,  RESET,  KC_PLUS,   \
+    _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN,            KC_RPRN, KC_P4, KC_P5,  KC_P6,  KC_MINS,KC_PIPE,   \
+    _______,_______,_______,_______,_______,_______,            _______, KC_P1, KC_P2,  KC_P3,  KC_EQL, KC_UNDS,   \
+                                            _______,KC_PSCR,    _______, KC_P0,                                    \
+                                            _______,_______,    _______,_______,                                   \
+                                            _______,_______,    _______,_______,                                   \
+                                            _______,_______,    _______,_______                                    \
+),
+
+[_RAISE] = LAYOUT(
+    _______,RESET,  _______,_______,_______,KC_LBRC,            KC_RBRC,_______,KC_NLCK,KC_INS, KC_SLCK,KC_MUTE,   \
+    _______,KC_LEFT,KC_UP  ,KC_DOWN,KC_RGHT,KC_LPRN,            KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU,   \
+    _______,_______,_______,_______,_______,_______,            _______,_______,_______,_______,_______,KC_VOLD,   \
+                                            _______,_______,    KC_EQL, _______,                                   \
+                                            _______,_______,    _______,_______,                                   \
+                                            _______,_______,    _______,_______,                                   \
+                                            _______,_______,    _______,_______                                    \
+)
+};
+
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+

keyboards/handwired/dactyl_manuform/4x6/rules.mk

@@ -0,0 +1,21 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+

keyboards/handwired/dactyl_manuform/dactyl_manuform.h

@@ -1,13 +1,15 @@
 #pragma once
 
-#ifdef KEYBOARD_handwired_dactyl_manuform_6x6
-    #include "6x6.h"
+#ifdef KEYBOARD_handwired_dactyl_manuform_4x5
+    #include "4x5.h"
+#elif KEYBOARD_handwired_dactyl_manuform_4x6
+    #include "4x6.h"
 #elif KEYBOARD_handwired_dactyl_manuform_5x6
     #include "5x6.h"
-#elif KEYBOARD_handwired_dactyl_manuform_4x5
-    #include "4x5.h"
 #elif KEYBOARD_handwired_dactyl_manuform_5x7
     #include "5x7.h"
+#elif KEYBOARD_handwired_dactyl_manuform_6x6
+    #include "6x6.h"
 #endif
 
 //void promicro_bootloader_jmp(bool program);

keyboards/handwired/ibm122m/ibm122m.h

@@ -21,14 +21,13 @@
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
 #define LAYOUT( \
-            k09, k19, k1A, k29, k39, k3A, k49, k59, k5A, k69, k79, k7A,             k3G, k3H, k2G, \
-            k0A, k0B, k1B, k2A, k2B, k3B, k4A, k4B, k5B, k6A, k6B, k7B,             k1G, k5G, k4G, \
-k31, k32,   k34, k24, k25, k26, k27, k37, k38, k28, k2C, k2D, k2E, k3E, k3C, k3F,                   k2F, k2H, k2I, k20, \
-k21, k41,   k42, k44, k45, k46, k47, k57, k58, k48, k4C, k4D, k4E, k5E, k5C, k6F,                   k4F, k4H, k4I, k40, \
-k51, k52,   k62, k14, k15, k16, k17, k07, k08, k18, k1C, k1D, k1E, k0E, k6E,                        k1F, k1H, k1I, k10, \
-k11, k12,   k73, k74, k64, k65, k66, k67, k77, k78, k68, k6C, k6D, k7E,      k63,        k0G,       k61, k6H, k6I, k7J, \
-k02, k01,   k00,    k70,                k71,             k03,      k72,             k60, k0J, k1J,  k7H,      k7I, \
-                                                                                         k0F \
+                k09, k19, k1A, k29, k39, k3A, k49, k59, k5A, k69, k79, k7A,                                                  \
+                k0A, k0B, k1B, k2A, k2B, k3B, k4A, k4B, k5B, k6A, k6B, k7B,                                                  \
+    k31, k32,   k34, k24, k25, k26, k27, k37, k38, k28, k2C, k2D, k2E, k3E, k3C, k3F,   k3G, k3H, k2G,   k2F, k2H, k2I, k20, \
+    k21, k41,   k42, k44, k45, k46, k47, k57, k58, k48, k4C, k4D, k4E, k5E, k5C, k6F,   k1G, k5G, k4G,   k4F, k4H, k4I, k40, \
+    k51, k52,   k62, k14, k15, k16, k17, k07, k08, k18, k1C, k1D, k1E, k0E, k6E,             k0G,        k1F, k1H, k1I, k10, \
+    k11, k12,   k73, k74, k64, k65, k66, k67, k77, k78, k68, k6C, k6D, k7E,      k63,   k60, k0J, k1J,   k61, k6H, k6I, k7J, \
+    k02, k01,   k00,    k70,                k71,             k03,      k72,                  k0F,        k7H,      k7I       \
 ) \
 { \
     {   k00,   k01,   k02,   k03,   KC_NO, KC_NO, KC_NO, k07,   k08,   k09,   k0A,   k0B,   KC_NO, KC_NO, k0E,   k0F,   k0G,   KC_NO, KC_NO, k0J   }, \

keyboards/handwired/ibm122m/info.json

@@ -0,0 +1,136 @@
+{
+  "keyboard_name": "IBM Model M 122-key",
+  "url": "",
+  "maintainer": "qmk",
+  "bootloader": "",
+  "width": 24.75,
+  "height": 8,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"label":"F13", "x":3.25, "y":0},
+        {"label":"F14", "x":4.25, "y":0},
+        {"label":"F15", "x":5.25, "y":0},
+        {"label":"F16", "x":6.25, "y":0},
+        {"label":"F17", "x":7.25, "y":0},
+        {"label":"F18", "x":8.25, "y":0},
+        {"label":"F19", "x":9.25, "y":0},
+        {"label":"F20", "x":10.25, "y":0},
+        {"label":"F21", "x":11.25, "y":0},
+        {"label":"F22", "x":12.25, "y":0},
+        {"label":"F23", "x":13.25, "y":0},
+        {"label":"F24", "x":14.25, "y":0},
+        {"label":"F1", "x":3.25, "y":1},
+        {"label":"F2", "x":4.25, "y":1},
+        {"label":"F3", "x":5.25, "y":1},
+        {"label":"F4", "x":6.25, "y":1},
+        {"label":"F5", "x":7.25, "y":1},
+        {"label":"F6", "x":8.25, "y":1},
+        {"label":"F7", "x":9.25, "y":1},
+        {"label":"F8", "x":10.25, "y":1},
+        {"label":"F9", "x":11.25, "y":1},
+        {"label":"F10", "x":12.25, "y":1},
+        {"label":"F11", "x":13.25, "y":1},
+        {"label":"F12", "x":14.25, "y":1},
+        {"label":"Esc", "x":0, "y":3},
+        {"x":1, "y":3},
+        {"label":"`", "x":2.25, "y":3},
+        {"label":"1", "x":3.25, "y":3},
+        {"label":"2", "x":4.25, "y":3},
+        {"label":"3", "x":5.25, "y":3},
+        {"label":"4", "x":6.25, "y":3},
+        {"label":"5", "x":7.25, "y":3},
+        {"label":"6", "x":8.25, "y":3},
+        {"label":"7", "x":9.25, "y":3},
+        {"label":"8", "x":10.25, "y":3},
+        {"label":"9", "x":11.25, "y":3},
+        {"label":"0", "x":12.25, "y":3},
+        {"label":"-", "x":13.25, "y":3},
+        {"label":"=", "x":14.25, "y":3},
+        {"label":"Backspace", "x":15.25, "y":3, "w":2},
+        {"label":"Insert", "x":17.5, "y":3},
+        {"label":"Home", "x":18.5, "y":3},
+        {"label":"Page Up", "x":19.5, "y":3},
+        {"label":"Num Lock", "x":20.75, "y":3},
+        {"label":"/", "x":21.75, "y":3},
+        {"label":"*", "x":22.75, "y":3},
+        {"label":"-", "x":23.75, "y":3},
+        {"x":0, "y":4},
+        {"x":1, "y":4},
+        {"label":"Tab", "x":2.25, "y":4, "w":1.5},
+        {"label":"Q", "x":3.75, "y":4},
+        {"label":"W", "x":4.75, "y":4},
+        {"label":"E", "x":5.75, "y":4},
+        {"label":"R", "x":6.75, "y":4},
+        {"label":"T", "x":7.75, "y":4},
+        {"label":"Y", "x":8.75, "y":4},
+        {"label":"U", "x":9.75, "y":4},
+        {"label":"I", "x":10.75, "y":4},
+        {"label":"O", "x":11.75, "y":4},
+        {"label":"P", "x":12.75, "y":4},
+        {"label":"[", "x":13.75, "y":4},
+        {"label":"]", "x":14.75, "y":4},
+        {"label":"Enter", "x":16, "y":4, "w":1.25, "h":2},
+        {"label":"Delete", "x":17.5, "y":4},
+        {"label":"End", "x":18.5, "y":4},
+        {"label":"Page Down", "x":19.5, "y":4},
+        {"label":"7", "x":20.75, "y":4},
+        {"label":"8", "x":21.75, "y":4},
+        {"label":"9", "x":22.75, "y":4},
+        {"label":"+", "x":23.75, "y":4},
+        {"x":0, "y":5},
+        {"x":1, "y":5},
+        {"label":"Caps Lock", "x":2.25, "y":5, "w":1.75},
+        {"label":"A", "x":4, "y":5},
+        {"label":"S", "x":5, "y":5},
+        {"label":"D", "x":6, "y":5},
+        {"label":"F", "x":7, "y":5},
+        {"label":"G", "x":8, "y":5},
+        {"label":"H", "x":9, "y":5},
+        {"label":"J", "x":10, "y":5},
+        {"label":"K", "x":11, "y":5},
+        {"label":"L", "x":12, "y":5},
+        {"label":";", "x":13, "y":5},
+        {"label":"'", "x":14, "y":5},
+        {"label":"#", "x":15, "y":5},
+        {"label":"Up", "x":18.5, "y":5},
+        {"label":"4", "x":20.75, "y":5},
+        {"label":"5", "x":21.75, "y":5},
+        {"label":"6", "x":22.75, "y":5},
+        {"x":23.75, "y":5},
+        {"x":0, "y":6},
+        {"x":1, "y":6},
+        {"label":"Shift", "x":2.25, "y":6, "w":1.25},
+        {"label":"\\", "x":3.5, "y":6},
+        {"label":"Z", "x":4.5, "y":6},
+        {"label":"X", "x":5.5, "y":6},
+        {"label":"C", "x":6.5, "y":6},
+        {"label":"V", "x":7.5, "y":6},
+        {"label":"B", "x":8.5, "y":6},
+        {"label":"N", "x":9.5, "y":6},
+        {"label":"M", "x":10.5, "y":6},
+        {"label":",", "x":11.5, "y":6},
+        {"label":".", "x":12.5, "y":6},
+        {"label":"/", "x":13.5, "y":6},
+        {"label":"Shift", "x":14.5, "y":6, "w":2.75},
+        {"label":"Left", "x":17.5, "y":6},
+        {"x":18.5, "y":6},
+        {"label":"Right", "x":19.5, "y":6},
+        {"label":"1", "x":20.75, "y":6},
+        {"label":"2", "x":21.75, "y":6},
+        {"label":"3", "x":22.75, "y":6},
+        {"label":"Enter", "x":23.75, "y":6, "h":2},
+        {"x":0, "y":7},
+        {"x":1, "y":7},
+        {"label":"Ctrl", "x":2.25, "y":7, "w":1.5},
+        {"label":"Alt", "x":4.75, "y":7, "w":1.5},
+        {"x":6.25, "y":7, "w":7},
+        {"label":"AltGr", "x":13.25, "y":7, "w":1.5},
+        {"label":"Ctrl", "x":15.75, "y":7, "w":1.5},
+        {"label":"Down", "x":18.5, "y":7},
+        {"label":"0", "x":20.75, "y":7, "w":2},
+        {"label":".", "x":22.75, "y":7}
+      ]
+    }
+  }
+}

keyboards/handwired/ibm122m/keymaps/default/keymap.c

@@ -16,16 +16,16 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-// Original Layer
-[0] = LAYOUT( 
-                KC_F13,   KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22,   KC_F23,    KC_F24,                     KC_INS, KC_HOME, KC_PGUP,
-                KC_F1,    KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,   KC_F11,    KC_F12,                     KC_DEL, KC_END,  KC_PGDN,
-KC_ESC, KC_NO,  KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,     KC_0,      KC_MINUS, KC_EQL, KC_BSPC,                            KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-KC_NO,  KC_NO,  KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,     KC_P,      KC_LBRC,  KC_RBRC,KC_ENTER,                           KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-KC_NO,  KC_NO,  KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,     KC_SCOLON, KC_QUOT,  KC_BSLS,                                    KC_P4,   KC_P5,   KC_P6,   KC_BSPC,
-KC_NO,  KC_NO,  KC_LSHIFT,KC_NO,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMMA, KC_DOT,    KC_SLSH,  KC_RSFT,                  KC_UP,            KC_P1,   KC_P2,   KC_P3,   KC_PENT,
-KC_NO,  KC_NO, KC_LCTRL,  KC_LALT,                                        KC_SPC,                              KC_RALT,  KC_RCTRL,        KC_LEFT, KC_NO, KC_RIGHT,KC_P0,            KC_PDOT,    
-                                                                                                                                                   KC_DOWN),
+  // Original Layer
+  [0] = LAYOUT(
+                     KC_F13,  KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22,  KC_F23,  KC_F24,
+                     KC_F1,   KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,  KC_F11,  KC_F12,
+    KC_ESC, KC_NO,   KC_GRV,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,   KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_NO,  KC_NO,   KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_ENT,    KC_DEL,  KC_END,  KC_PGDN,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_NO,  KC_NO,   KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_BSLS,                     KC_UP,               KC_P4,   KC_P5,   KC_P6,   KC_BSPC,
+    KC_NO,  KC_NO,   KC_LSFT, KC_NO,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,            KC_LEFT, KC_NO,   KC_RIGHT,   KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_NO,  KC_NO,   KC_LCTL, KC_LALT,                                        KC_SPC,                           KC_RALT, KC_RCTL,                     KC_DOWN,             KC_P0,            KC_PDOT
+  ),
 };
 
 void matrix_init_user(void) {
@@ -37,7 +37,7 @@ void matrix_scan_user(void) {
 }
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-      
+
   return true;
 }
 

keyboards/handwired/ibm122m/keymaps/lukaus/keymap.c

@@ -16,7 +16,7 @@
 #include QMK_KEYBOARD_H
 
 enum custom_keycodes {
-  PLACEHOLDER = SAFE_RANGE, 
+  PLACEHOLDER = SAFE_RANGE,
 
   DVP_ESC, // Grave escape basically i think
   DVP_AMPR,
@@ -37,105 +37,104 @@ enum custom_keycodes {
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-// Programmer's Dvorak
-[0] = LAYOUT( 
-                        KC_F13,   KC_F14,   KC_F15,       KC_F16,   KC_F17,   KC_F18,   KC_F19,   KC_F20,       KC_F21,   KC_F22,   KC_F23,       KC_F24,                       KC_INS,   KC_HOME, KC_PGUP,
-                        KC_F1,    KC_F2,    KC_F3,        KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,        KC_F9,    KC_F10,   KC_F11,       KC_F12,                       KC_DEL,   KC_END,  KC_PGDN,
-KC_ESC,     TO(1),      DVP_ESC,  DVP_AMPR, DVP_LBRACKET, DVP_LCBR, DVP_RCBR, DVP_LPRN, DVP_EQUAL,DVP_ASTERISK, DVP_RPRN, DVP_PLUS, DVP_RBRACKET, DVP_EXLM, DVP_HASH, KC_BSPC,                                KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-KC_NO,      TO(2),      KC_TAB,   KC_SCOLON,KC_COMMA,     KC_DOT,   KC_P,     KC_Y,     KC_F,     KC_G,         KC_C,     KC_R,     KC_L,         KC_SLSH,  DVP_AT,   KC_ENTER,                               KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-KC_NO,      KC_NO,      MO(3),    KC_A,     KC_O,         KC_E,     KC_U,     KC_I,     KC_D,     KC_H,         KC_T,     KC_N,     KC_S,         KC_MINUS, KC_BSLS,                                          KC_P4,   KC_P5,   KC_P6,   MO(4),
-LCTL(KC_F), KC_LALT,    KC_LSHIFT,KC_ESC,   KC_QUOT,      KC_Q,     KC_J,     KC_K,     KC_X,     KC_B,         KC_M,     KC_W,     KC_V,         KC_Z,     KC_RSFT,                      KC_UP,              KC_P1,   KC_P2,   KC_P3,   KC_PENT,
-LCTL(KC_C), LCTL(KC_V), KC_LCTRL, KC_LGUI,                                    KC_SPC,                                                             KC_RALT,  KC_RCTRL,           KC_LEFT,  KC_BTN3, KC_RIGHT,  KC_P0,            KC_PDOT,    
-                                                                                                                                                                                    KC_DOWN
-),
+  // Programmer's Dvorak
+  [0] = LAYOUT(
+                            KC_F13,   KC_F14,   KC_F15,       KC_F16,   KC_F17,   KC_F18,   KC_F19,   KC_F20,       KC_F21,   KC_F22,   KC_F23,       KC_F24,
+                            KC_F1,    KC_F2,    KC_F3,        KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,        KC_F9,    KC_F10,   KC_F11,       KC_F12,
+    KC_ESC,     TO(1),      DVP_ESC,  DVP_AMPR, DVP_LBRACKET, DVP_LCBR, DVP_RCBR, DVP_LPRN, DVP_EQUAL,DVP_ASTERISK, DVP_RPRN, DVP_PLUS, DVP_RBRACKET, DVP_EXLM, DVP_HASH, KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_NO,      TO(2),      KC_TAB,   KC_SCOLON,KC_COMMA,     KC_DOT,   KC_P,     KC_Y,     KC_F,     KC_G,         KC_C,     KC_R,     KC_L,         KC_SLSH,  DVP_AT,   KC_ENTER,   KC_DEL,  KC_END,  KC_PGDN,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_NO,      KC_NO,      MO(3),    KC_A,     KC_O,         KC_E,     KC_U,     KC_I,     KC_D,     KC_H,         KC_T,     KC_N,     KC_S,         KC_MINUS, KC_BSLS,                       KC_UP,               KC_P4,   KC_P5,   KC_P6,   MO(4),
+    LCTL(KC_F), KC_LALT,    KC_LSHIFT,KC_ESC,   KC_QUOT,      KC_Q,     KC_J,     KC_K,     KC_X,     KC_B,         KC_M,     KC_W,     KC_V,         KC_Z,     KC_RSFT,              KC_LEFT, KC_BTN3, KC_RIGHT,   KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    LCTL(KC_C), LCTL(KC_V), KC_LCTRL, KC_LGUI,                                    KC_SPC,                                                             KC_RALT,  KC_RCTRL,                      KC_DOWN,             KC_P0,            KC_PDOT
+  ),
 
-// Qwerty layer + function
-[1] = LAYOUT( 
-                KC_F13,   KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22,   KC_F23,    KC_F24,                     KC_INS, KC_HOME, KC_PGUP,
-                KC_F1,    KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,   KC_F11,    KC_F12,                     KC_DEL, KC_END,  KC_PGDN,
-KC_ESC, TO(0),  KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,     KC_0,      KC_MINUS, KC_EQL, KC_BSPC,                            KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-KC_NO,  KC_NO,  KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,     KC_P,      KC_LBRC,  KC_RBRC,KC_ENTER,                           KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-KC_NO,  KC_NO,  MO(3),    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,     KC_SCOLON, KC_QUOT,  KC_BSLS,                                    KC_P4,   KC_P5,   KC_P6,   KC_BSPC,
-KC_NO,  KC_NO,  KC_LSHIFT,KC_NO,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMMA, KC_DOT,    KC_SLSH,  KC_RSFT,                  KC_UP,            KC_P1,   KC_P2,   KC_P3,   KC_PENT,
-KC_NO,  KC_LALT,KC_LCTRL, KC_LGUI,                                      KC_SPC,                                KC_RALT,  KC_RCTRL,        KC_LEFT, KC_WH_D, KC_RIGHT,KC_P0,            KC_PDOT,    
-                                                                                                                                                  KC_DOWN
-),
-// Orirginal Layer
-[2] = LAYOUT( 
-                KC_F13,   KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22,   KC_F23,    KC_F24,                     KC_INS, KC_HOME, KC_PGUP,
-                KC_F1,    KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,   KC_F11,    KC_F12,                     KC_DEL, KC_END,  KC_PGDN,
-KC_ESC, TO(1),  KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,     KC_0,      KC_MINUS, KC_EQL, KC_BSPC,                            KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-KC_NO,  TO(0),  KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,     KC_P,      KC_LBRC,  KC_RBRC,KC_ENTER,                           KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-KC_NO,  KC_NO,  KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,     KC_SCOLON, KC_QUOT,  KC_BSLS,                                    KC_P4,   KC_P5,   KC_P6,   KC_BSPC,
-KC_NO,  KC_NO,  KC_LSHIFT,KC_NO,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMMA, KC_DOT,    KC_SLSH,  KC_RSFT,                  KC_UP,            KC_P1,   KC_P2,   KC_P3,   KC_PENT,
-KC_NO,  KC_LALT,KC_LCTRL, KC_LGUI,                                        KC_SPC,                              KC_RALT,  KC_RCTRL,        KC_LEFT, KC_WH_D, KC_RIGHT,KC_P0,            KC_PDOT,    
-                                                                                                                                                  KC_DOWN
-),
+  // Qwerty layer + function
+  [1] = LAYOUT(
+                    KC_F13,   KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22,   KC_F23,    KC_F24,
+                    KC_F1,    KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,   KC_F11,    KC_F12,
+    KC_ESC, TO(0),  KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,     KC_0,      KC_MINUS, KC_EQL, KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_NO,  KC_NO,  KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,     KC_P,      KC_LBRC,  KC_RBRC,KC_ENTER,   KC_DEL,  KC_END,  KC_PGDN,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_NO,  KC_NO,  MO(3),    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,     KC_SCOLON, KC_QUOT,  KC_BSLS,                     KC_UP,               KC_P4,   KC_P5,   KC_P6,   KC_BSPC,
+    KC_NO,  KC_NO,  KC_LSHIFT,KC_NO,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMMA, KC_DOT,    KC_SLSH,  KC_RSFT,            KC_LEFT, KC_WH_D, KC_RIGHT,   KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_NO,  KC_LALT,KC_LCTRL, KC_LGUI,                                      KC_SPC,                                KC_RALT,  KC_RCTRL,                    KC_DOWN,             KC_P0,            KC_PDOT
+  ),
+
+  // Orirginal Layer
+  [2] = LAYOUT(
+                    KC_F13,   KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22,   KC_F23,    KC_F24,
+                    KC_F1,    KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,   KC_F11,    KC_F12,
+    KC_ESC, TO(1),  KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,     KC_0,      KC_MINUS, KC_EQL, KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_NO,  TO(0),  KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,     KC_P,      KC_LBRC,  KC_RBRC,KC_ENTER,   KC_DEL,  KC_END,  KC_PGDN,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_NO,  KC_NO,  KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,     KC_SCOLON, KC_QUOT,  KC_BSLS,                     KC_UP,               KC_P4,   KC_P5,   KC_P6,   KC_BSPC,
+    KC_NO,  KC_NO,  KC_LSHIFT,KC_NO,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMMA, KC_DOT,    KC_SLSH,  KC_RSFT,            KC_LEFT, KC_WH_D, KC_RIGHT,   KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_NO,  KC_LALT,KC_LCTRL, KC_LGUI,                                        KC_SPC,                              KC_RALT,  KC_RCTRL,                    KC_DOWN,             KC_P0,            KC_PDOT
+  ),
+
+  // Function Layer
+  [3] = LAYOUT(
+                      KC_F1,    KC_F2,  KC_F3,                KC_F4,                KC_F5,                KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,     KC_F12,
+                      KC_F13,   KC_F14, KC_F15,               KC_F16,               KC_F17,               KC_F18,   KC_F19,   KC_F20,   KC_F21,   KC_F22,   KC_F23,     KC_F24,
+    MU_TOG, KC_NO,    KC_ESC,   KC_1,   KC_2,                 KC_3,                 KC_4,                 KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,       KC_MINUS, KC_EQL, KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK,    KC_PSLS,    KC_PAST,    KC_PMNS,
+    MU_MOD, KC_NO,    KC_TAB,   KC_NO,  KC_MEDIA_PREV_TRACK,  KC_MEDIA_PLAY_PAUSE,  KC_MEDIA_NEXT_TRACK,  KC_NO,    KC_NO,    KC_PGUP,  KC_DEL,   KC_NO,    KC_NO,      KC_LBRC,  KC_RBRC,KC_ENTER,   KC_DEL,  KC_END,  KC_PGDN,    KC_NO,      KC_NO,      KC_NO,      KC_PPLS,
+    KC_NO,  KC_NO,    KC_TRNS,  KC_NO,  KC_AUDIO_VOL_DOWN,    KC_AUDIO_VOL_UP,      KC_AUDIO_MUTE,        KC_NO,    KC_LEFT,  KC_DOWN,  KC_UP,    KC_RIGHT, KC_SCOLON,  KC_QUOT,  KC_BSLS,                     KC_UP,               LSFT(KC_E), LSFT(KC_F), KC_NO,      KC_BSPC,
+    KC_NO,  KC_LALT,  KC_LSHIFT,KC_NO,  KC_NO,                KC_NO,                KC_NO,                KC_NO,    KC_NO,    KC_NO,    KC_PGDN,  KC_COMMA, KC_DOT,     KC_SLSH,  KC_RSFT,            KC_LEFT, KC_WH_D, KC_RIGHT,   LSFT(KC_B), LSFT(KC_C), LSFT(KC_D), KC_PENT,
+    KC_NO,  KC_NO,    KC_LCTRL, KC_LGUI,                                                                            KC_SPC,                                 KC_RALT,    KC_CAPS,                               KC_DOWN,             LSFT(KC_A),             KC_PDOT
+  ),
+
+  // Literally just the numpad is different
+  [4] = LAYOUT(
+                          KC_F13,   KC_F14,   KC_F15,       KC_F16,   KC_F17,   KC_F18,   KC_F19,   KC_F20,       KC_F21,   KC_F22,   KC_F23,       KC_F24,
+                          KC_F1,    KC_F2,    KC_F3,        KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,        KC_F9,    KC_F10,   KC_F11,       KC_F12,
+  KC_ESC,     TO(1),      DVP_ESC,  DVP_AMPR, DVP_LBRACKET, DVP_LCBR, DVP_RCBR, DVP_LPRN, DVP_EQUAL,DVP_ASTERISK, DVP_RPRN, DVP_PLUS, DVP_RBRACKET, DVP_EXLM, DVP_HASH, KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP,    KC_NO,    KC_NO,    KC_NO,    KC_NO,
+  KC_NO,      TO(2),      KC_TAB,   KC_SCOLON,KC_COMMA,     KC_DOT,   KC_P,     KC_Y,     KC_F,     KC_G,         KC_C,     KC_R,     KC_L,         KC_SLSH,  DVP_AT,   KC_ENTER,   KC_DEL,  KC_END,  KC_PGDN,    KC_BTN1,  KC_MS_U,  KC_BTN2,  KC_NO,
+  KC_NO,      KC_NO,      TO(0),    KC_A,     KC_O,         KC_E,     KC_U,     KC_I,     KC_D,     KC_H,         KC_T,     KC_N,     KC_S,         KC_MINUS, KC_BSLS,                       KC_UP,               KC_MS_L,  KC_NO,    KC_MS_R,  KC_TRNS,
+  LCTL(KC_F), KC_LALT,    KC_LSHIFT,KC_NO,    KC_QUOT,      KC_Q,     KC_J,     KC_K,     KC_X,     KC_B,         KC_M,     KC_W,     KC_V,         KC_Z,     KC_RSFT,              KC_LEFT, KC_BTN3, KC_RIGHT,   KC_GT,    KC_MS_D,  KC_GT,    KC_PENT,
+  LCTL(KC_C), LCTL(KC_V), KC_LCTRL, KC_LGUI,                                    KC_SPC,                                                             KC_RALT,  KC_RCTRL,                      KC_DOWN,             KC_BTN1,            KC_PDOT
+
+  ),
+
+  /*
+  [4] = LAYOUT(
+                      KC_F13,   KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22,   KC_F23, KC_F24,
+                      KC_F1,    KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,   KC_F11, KC_F12,
+    MU_TOG, TO(0),    KC_DLR,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,     KC_0,   KC_MINUS, KC_EQL, KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK,    KC_PSLS,    KC_PAST,    KC_PMNS,
+    MU_MOD, KC_NO,    KC_TAB,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,  KC_LBRC,  KC_RBRC,KC_ENTER,   KC_DEL,  KC_END,  KC_PGDN,    KC_NO,      KC_NO,      KC_NO,      KC_PPLS,
+    KC_NO,  KC_NO,    KC_TRNS,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,  KC_QUOT,  KC_BSLS,                     KC_UP,               LSFT(KC_E), LSFT(KC_F), KC_NO,      KC_BSPC,
+    KC_NO,  KC_LALT,  KC_LSHIFT,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_COMMA, KC_DOT, KC_SLSH,  KC_RSFT,            KC_LEFT, KC_WH_D, KC_RIGHT,   LSFT(KC_B), LSFT(KC_C), LSFT(KC_D), KC_PENT,
+    KC_NO,  KC_LGUI,  KC_LCTRL, KC_LALT,                                                  KC_SPC,                 KC_RALT,  KC_RCTRL,                    KC_DOWN,             LSFT(KC_A),             KC_PDOT
 
-// Function Layer
-[3] = LAYOUT( 
-                  KC_F1,    KC_F2,  KC_F3,                KC_F4,                KC_F5,                KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,     KC_F12,                     KC_INS, KC_HOME, KC_PGUP,
-                  KC_F13,   KC_F14, KC_F15,               KC_F16,               KC_F17,               KC_F18,   KC_F19,   KC_F20,   KC_F21,   KC_F22,   KC_F23,     KC_F24,                     KC_DEL, KC_END,  KC_PGDN,
-MU_TOG, KC_NO,    KC_ESC,   KC_1,   KC_2,                 KC_3,                 KC_4,                 KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,       KC_MINUS, KC_EQL, KC_BSPC,                              KC_NLCK,    KC_PSLS,    KC_PAST,    KC_PMNS,
-MU_MOD, KC_NO,    KC_TAB,   KC_NO,  KC_MEDIA_PREV_TRACK,  KC_MEDIA_PLAY_PAUSE,  KC_MEDIA_NEXT_TRACK,  KC_NO,    KC_NO,    KC_PGUP,  KC_DEL,   KC_NO,    KC_NO,      KC_LBRC,  KC_RBRC,KC_ENTER,                             KC_NO,      KC_NO,      KC_NO,      KC_PPLS,
-KC_NO,  KC_NO,    KC_TRNS,  KC_NO,  KC_AUDIO_VOL_DOWN,    KC_AUDIO_VOL_UP,      KC_AUDIO_MUTE,        KC_NO,    KC_LEFT,  KC_DOWN,  KC_UP,    KC_RIGHT, KC_SCOLON,  KC_QUOT,  KC_BSLS,                                      LSFT(KC_E), LSFT(KC_F), KC_NO,      KC_BSPC,
-KC_NO,  KC_LALT,  KC_LSHIFT,KC_NO,  KC_NO,                KC_NO,                KC_NO,                KC_NO,    KC_NO,    KC_NO,    KC_PGDN,  KC_COMMA, KC_DOT,     KC_SLSH,  KC_RSFT,                    KC_UP,            LSFT(KC_B), LSFT(KC_C), LSFT(KC_D), KC_PENT,
-KC_NO,  KC_NO,    KC_LCTRL, KC_LGUI,                                                                            KC_SPC,                                 KC_RALT,    KC_CAPS,                    KC_LEFT,  KC_WH_D, KC_RIGHT,LSFT(KC_A),             KC_PDOT,    
-                                                                                                                                                                    KC_DOWN
-),
-// Literally just the numpad is different
-[4] = LAYOUT( 
-                        KC_F13,   KC_F14,   KC_F15,       KC_F16,   KC_F17,   KC_F18,   KC_F19,   KC_F20,       KC_F21,   KC_F22,   KC_F23,       KC_F24,                       KC_INS,   KC_HOME, KC_PGUP,
-                        KC_F1,    KC_F2,    KC_F3,        KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,        KC_F9,    KC_F10,   KC_F11,       KC_F12,                       KC_DEL,   KC_END,  KC_PGDN,
-KC_ESC,     TO(1),      DVP_ESC,  DVP_AMPR, DVP_LBRACKET, DVP_LCBR, DVP_RCBR, DVP_LPRN, DVP_EQUAL,DVP_ASTERISK, DVP_RPRN, DVP_PLUS, DVP_RBRACKET, DVP_EXLM, DVP_HASH, KC_BSPC,                                KC_NO,    KC_NO,    KC_NO,    KC_NO,
-KC_NO,      TO(2),      KC_TAB,   KC_SCOLON,KC_COMMA,     KC_DOT,   KC_P,     KC_Y,     KC_F,     KC_G,         KC_C,     KC_R,     KC_L,         KC_SLSH,  DVP_AT,   KC_ENTER,                               KC_BTN1,  KC_MS_U,  KC_BTN2,  KC_NO,
-KC_NO,      KC_NO,      TO(0),    KC_A,     KC_O,         KC_E,     KC_U,     KC_I,     KC_D,     KC_H,         KC_T,     KC_N,     KC_S,         KC_MINUS, KC_BSLS,                                          KC_MS_L,  KC_NO,    KC_MS_R,  KC_TRNS,
-LCTL(KC_F), KC_LALT,    KC_LSHIFT,KC_NO,    KC_QUOT,      KC_Q,     KC_J,     KC_K,     KC_X,     KC_B,         KC_M,     KC_W,     KC_V,         KC_Z,     KC_RSFT,                      KC_UP,              KC_GT,    KC_MS_D,  KC_GT,    KC_PENT,
-LCTL(KC_C), LCTL(KC_V), KC_LCTRL, KC_LGUI,                                    KC_SPC,                                                             KC_RALT,  KC_RCTRL,           KC_LEFT,  KC_BTN3, KC_RIGHT,  KC_BTN1,            KC_PDOT,    
-                                                                                                                                                                                    KC_DOWN
-),
-/*
-[4] = LAYOUT( 
-                  KC_F13,   KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22,   KC_F23, KC_F24,                     KC_INS, KC_HOME, KC_PGUP,
-                  KC_F1,    KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,   KC_F11, KC_F12,                     KC_DEL, KC_END,  KC_PGDN,
-MU_TOG, TO(0),    KC_DLR,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,     KC_0,   KC_MINUS, KC_EQL, KC_BSPC,                              KC_NLCK,    KC_PSLS,    KC_PAST,    KC_PMNS,
-MU_MOD, KC_NO,    KC_TAB,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,  KC_LBRC,  KC_RBRC,KC_ENTER,                             KC_NO,      KC_NO,      KC_NO,      KC_PPLS,
-KC_NO,  KC_NO,    KC_TRNS,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,  KC_QUOT,  KC_BSLS,                                      LSFT(KC_E), LSFT(KC_F), KC_NO,      KC_BSPC,
-KC_NO,  KC_LALT,  KC_LSHIFT,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_COMMA, KC_DOT, KC_SLSH,  KC_RSFT,                  KC_UP,              LSFT(KC_B), LSFT(KC_C), LSFT(KC_D), KC_PENT,
-KC_NO,  KC_LGUI,  KC_LCTRL, KC_LALT,                                                  KC_SPC,                 KC_RALT,  KC_RCTRL,       KC_LEFT,  KC_WH_D, KC_RIGHT,  LSFT(KC_A),             KC_PDOT,    
-                                                                                                                                                  KC_DOWN
-),*/
-/*[0] = LAYOUT( 
-   KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_NO,TO(1),KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1,   
-   KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, TO(2),KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2,   
-   KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3,   
-   KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_BSPC,KC_4,KC_4,KC_4, KC_4,   
-   KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5,   
-   KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6,   
-   KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7,   
-   KC_8, KC_SPC,KC_8,KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, TO(1)   
-  
-),
-[1] = LAYOUT( 
-   KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, TO(0),KC_NO,KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,   
-   KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, TO(2),KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,   
-   KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,   
-   KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_BSPC,KC_Q,KC_R,KC_S, KC_T,   
-   KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,   
-   KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,   
-   KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,   
-   KC_A, KC_SPC,KC_C,KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, TO(0)   
-),
-[2] = LAYOUT(
-   KC_LCTRL,    KC_LALT,  KC_C,     KC_RALT,    KC_E,       KC_F, KC_G, KC_G, KC_H, KC_J, TO(0),  TO(1),  KC_M,     KC_N,   KC_QUOT,    KC_DOWN,  KC_UP,  KC_R,     KC_S,       KC_ENTER,   
-   KC_PPLS,     KC_B,     KC_C,     KC_D,       KC_A,       KC_S, KC_D, KC_F, KC_J, KC_J, KC_K,   KC_NO,  KC_K,     KC_L,   KC_SCOLON,  KC_P4,    KC_DEL, KC_P5,    KC_P6,      KC_RIGHT,   
-   KC_PMNS,     KC_1,     KC_C,    KC_D,       KC_1,       KC_2, KC_3, KC_4, KC_7, KC_J, KC_K,   KC_L,   KC_8,     KC_9,   KC_0,       KC_NLCK,  KC_PGUP,KC_PSLS,  KC_PAST,    KC_T,   
-   KC_A,        KC_ESC,   TO(0),KC_D,     KC_GRV,     KC_F, KC_G, KC_5, KC_6, KC_J, KC_K,   KC_L,   KC_EQL,   KC_N,   KC_MINUS,   KC_BSPC,  KC_INS, KC_HOME,  KC_S,       KC_T,   
-   KC_PPLS,     KC_NO,    KC_TAB,   KC_D,       KC_Q,       KC_W, KC_E, KC_R, KC_U, KC_J, KC_K,   KC_L,   KC_I,     KC_O,   KC_P,       KC_P7,    KC_PGDN,KC_P8,    KC_P9,      KC_T,   
-   KC_A,        KC_B,     KC_C,     KC_D,       KC_E,       KC_F, KC_G, KC_T, KC_Y, KC_J, KC_K,   KC_L,   KC_RBRC,  KC_N,   KC_LBRC,    KC_P,     KC_END, KC_R,     KC_S,       KC_T,   
-   KC_LEFT,     KC_P1,    KC_CAPS,  KC_RSFT,    KC_Z,       KC_X, KC_C, KC_V, KC_M, KC_J, KC_K,   KC_L,   KC_COMMA, KC_DOT, KC_BSLS,    KC_PENT,  KC_Q,   KC_P2,    KC_P3,      KC_T,   
-   KC_LGUI,     KC_SPACE, KC_RCTRL, KC_LSHIFT,  KC_E,       KC_F, KC_G, KC_B, KC_N, KC_J, KC_K,   KC_L,   KC_M,     KC_N,   KC_SLSH,    KC_P,     KC_Q,   KC_P0,    KC_PDOT,    KC_KP_ENTER   
   ),*/
+  /*[0] = LAYOUT(
+     KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_NO,TO(1),KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1,
+     KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, TO(2),KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2, KC_2,
+     KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3, KC_3,
+     KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_4, KC_BSPC,KC_4,KC_4,KC_4, KC_4,
+     KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5, KC_5,
+     KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6, KC_6,
+     KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7, KC_7,
+     KC_8, KC_SPC,KC_8,KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, KC_8, TO(1)
+
+  ),
+  [1] = LAYOUT(
+     KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, TO(0),KC_NO,KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,
+     KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, TO(2),KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,
+     KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,
+     KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_BSPC,KC_Q,KC_R,KC_S, KC_T,
+     KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,
+     KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,
+     KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, KC_T,
+     KC_A, KC_SPC,KC_C,KC_D, KC_E, KC_F, KC_G, KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, KC_P, KC_Q, KC_R, KC_S, TO(0)
+  ),
+  [2] = LAYOUT(
+     KC_LCTRL,    KC_LALT,  KC_C,     KC_RALT,    KC_E,       KC_F, KC_G, KC_G, KC_H, KC_J, TO(0),  TO(1),  KC_M,     KC_N,   KC_QUOT,    KC_DOWN,  KC_UP,  KC_R,     KC_S,       KC_ENTER,
+     KC_PPLS,     KC_B,     KC_C,     KC_D,       KC_A,       KC_S, KC_D, KC_F, KC_J, KC_J, KC_K,   KC_NO,  KC_K,     KC_L,   KC_SCOLON,  KC_P4,    KC_DEL, KC_P5,    KC_P6,      KC_RIGHT,
+     KC_PMNS,     KC_1,     KC_C,    KC_D,       KC_1,       KC_2, KC_3, KC_4, KC_7, KC_J, KC_K,   KC_L,   KC_8,     KC_9,   KC_0,       KC_NLCK,  KC_PGUP,KC_PSLS,  KC_PAST,    KC_T,
+     KC_A,        KC_ESC,   TO(0),KC_D,     KC_GRV,     KC_F, KC_G, KC_5, KC_6, KC_J, KC_K,   KC_L,   KC_EQL,   KC_N,   KC_MINUS,   KC_BSPC,  KC_INS, KC_HOME,  KC_S,       KC_T,
+     KC_PPLS,     KC_NO,    KC_TAB,   KC_D,       KC_Q,       KC_W, KC_E, KC_R, KC_U, KC_J, KC_K,   KC_L,   KC_I,     KC_O,   KC_P,       KC_P7,    KC_PGDN,KC_P8,    KC_P9,      KC_T,
+     KC_A,        KC_B,     KC_C,     KC_D,       KC_E,       KC_F, KC_G, KC_T, KC_Y, KC_J, KC_K,   KC_L,   KC_RBRC,  KC_N,   KC_LBRC,    KC_P,     KC_END, KC_R,     KC_S,       KC_T,
+     KC_LEFT,     KC_P1,    KC_CAPS,  KC_RSFT,    KC_Z,       KC_X, KC_C, KC_V, KC_M, KC_J, KC_K,   KC_L,   KC_COMMA, KC_DOT, KC_BSLS,    KC_PENT,  KC_Q,   KC_P2,    KC_P3,      KC_T,
+     KC_LGUI,     KC_SPACE, KC_RCTRL, KC_LSHIFT,  KC_E,       KC_F, KC_G, KC_B, KC_N, KC_J, KC_K,   KC_L,   KC_M,     KC_N,   KC_SLSH,    KC_P,     KC_Q,   KC_P0,    KC_PDOT,    KC_KP_ENTER
+    ),*/
 };
 
 const uint16_t PROGMEM fn_actions[] = {
@@ -166,7 +165,7 @@ void matrix_scan_user(void) {
 
 }
 
-bool left_shift_down = false; 
+bool left_shift_down = false;
 bool right_shift_down = false;
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
@@ -196,11 +195,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         return true;
       }
     break;
-  
-  
+
+
     case DVP_ESC:
     if (left_shift_down || right_shift_down)
-    {  
+    {
       if(record->event.pressed)
         SEND_STRING("~");
       return false;
@@ -214,7 +213,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     break;
 
     case DVP_AMPR:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -228,10 +227,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("&");
       return false;
     }
-    break; 
-  
+    break;
+
     case DVP_LBRACKET:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
         {
@@ -256,13 +255,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("[");
       return false;
     }
-    break; 
-  
+    break;
+
     case DVP_LCBR:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
-       { 
+       {
           if(left_shift_down)
             unregister_code(KC_LSHIFT);
           if(right_shift_down)
@@ -270,7 +269,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
           register_code(KC_5);
           unregister_code(KC_5);
-          
+
           if(left_shift_down)
             register_code(KC_LSHIFT);
           if(right_shift_down)
@@ -284,10 +283,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("{");
       return false;
     }
-    break; 
-   
+    break;
+
     case DVP_RCBR:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -298,7 +297,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         register_code(KC_3);
         unregister_code(KC_3);
-        
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -312,11 +311,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("}");
       return false;
     }
-    break; 
+    break;
 
 
     case DVP_LPRN:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -327,7 +326,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         register_code(KC_1);
         unregister_code(KC_1);
-        
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -341,10 +340,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("(");
     return false;
     }
-    break; 
-//   
+    break;
+//
     case DVP_AT:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -357,7 +356,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         register_code(KC_6);
         unregister_code(KC_6);
         unregister_code(KC_LSHIFT);
-          
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -371,11 +370,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("@");
     return false;
     }
-    break; 
+    break;
+
 
-    
     case DVP_EQUAL:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -386,7 +385,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         register_code(KC_9);
         unregister_code(KC_9);
-        
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -400,10 +399,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("=");
     return false;
     }
-    break; 
-    
+    break;
+
     case DVP_ASTERISK:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -414,7 +413,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         register_code(KC_0);
         unregister_code(KC_0);
-        
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -428,10 +427,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("*");
     return false;
     }
-    break; 
-    
+    break;
+
     case DVP_RPRN:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -442,7 +441,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         register_code(KC_2);
         unregister_code(KC_2);
-        
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -456,10 +455,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING(")");
     return false;
     }
-    break; 
+    break;
 
     case DVP_PLUS:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -470,7 +469,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         register_code(KC_4);
         unregister_code(KC_4);
-        
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -483,10 +482,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("+");
     }
     return false;
-    break; 
-    
+    break;
+
     case DVP_RBRACKET:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -497,7 +496,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         register_code(KC_6);
         unregister_code(KC_6);
-        
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -510,10 +509,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("]");
     }
     return false;
-    break; 
-    
+    break;
+
     case DVP_EXLM:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -524,7 +523,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         register_code(KC_8);
         unregister_code(KC_8);
-        
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -537,10 +536,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("!");
     }
     return false;
-    break; 
-    
+    break;
+
     case DVP_HASH:
-    if (left_shift_down || right_shift_down) 
+    if (left_shift_down || right_shift_down)
     {
       if(record->event.pressed)
       {
@@ -551,7 +550,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         register_code(KC_GRAVE);
         unregister_code(KC_GRAVE);
-        
+
         if(left_shift_down)
           register_code(KC_LSHIFT);
         if(right_shift_down)
@@ -564,7 +563,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("#");
     }
     return false;
-    break; 
+    break;
      case SHFT_DOT:
       if(record->event.pressed)
         SEND_STRING(">");
@@ -575,10 +574,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         SEND_STRING("<");
       break;
 
-  } 
-  
-  
-  
+  }
+
+
+
   return true;
 }
 

keyboards/handwired/jn68m/config.h

@@ -0,0 +1,54 @@
+/*
+Copyright 2018 Jumail Mundekkat / MxBlue
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC714
+#define PRODUCT_ID      0x1010
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    MxBlue
+#define PRODUCT         JN68M
+#define DESCRIPTION     Custom PCB for VA68M
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, B1, D5, D3, D2 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6, D1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)

keyboards/handwired/jn68m/info.json

@@ -0,0 +1,16 @@
+{
+  "keyboard_name": "JN68M",
+  "url": "",
+  "maintainer": "qmk",
+  "bootloader": "atmel-dfu",
+  "width": 17.25,
+  "height": 5,
+  "layouts": {
+      "LAYOUT": {
+        "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]
+      },
+      "LAYOUT_splitbs": {
+        "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]
+    }
+  }
+}

keyboards/handwired/jn68m/jn68m.c

@@ -0,0 +1,37 @@
+/* Copyright 2018 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "jn68m.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}

keyboards/handwired/jn68m/jn68m.h

@@ -0,0 +1,49 @@
+/* Copyright 2018 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef JN68M_H
+#define JN68M_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K1 , K2 , K3 , K4 , K5 , K6 , K7 , K8 , K9 , K10, K11, K12, K13, K14,      K67, K68,\
+  K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,      K69, K70,\
+  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, \
+  K43, K44, K45, K46, K47, K48, K49, K50, K51, K52,      K53, K54,           K55, \
+  K56, K57, K58,           K59,                K60,      K61, K63,      K64, K65, K66 \
+) { \
+  { K1 , K2 , K3 , K4 , K5 , K6 , K7 , K8 , K9 , K10, K11, K12, K13, K14, K67, K68 }, \
+  { K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K69, K70 }, \
+  { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42,KC_NO,KC_NO,KC_NO}, \
+  { K43, K44, K45, K46, K47, K48, K49, K50, K51, K52,KC_NO,K53, K54,KC_NO,K55,KC_NO}, \
+  { K56, K57, K58,KC_NO,KC_NO,K59,KC_NO,KC_NO,KC_NO,K60,KC_NO,K61, K63, K64, K65, K66} \
+}
+
+#define LAYOUT_splitbs( \
+  K1 , K2 , K3 , K4 , K5 , K6 , K7 , K8 , K9 , K10, K11, K12, K13, K14, K15,      K67, K68,\
+  K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,           K69, K70,\
+  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, \
+  K43, K44, K45, K46, K47, K48, K49, K50, K51, K52,      K53, K54,                K55, \
+  K56, K57, K58,           K59,                K60,      K61, K63,           K64, K65, K66 \
+) { \
+  { K1 , K2 , K3 , K4 , K5 , K6 , K7 , K8 , K9 , K10, K11, K12, K13, K14, K67, K68 }, \
+  { K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K69, K70 }, \
+  { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K15,KC_NO,KC_NO}, \
+  { K43, K44, K45, K46, K47, K48, K49, K50, K51, K52,KC_NO,K53, K54,KC_NO,K55,KC_NO}, \
+  { K56, K57, K58,KC_NO,KC_NO,K59,KC_NO,KC_NO,KC_NO,K60,KC_NO,K61, K63, K64, K65, K66} \
+}
+
+#endif

keyboards/handwired/jn68m/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/handwired/jn68m/keymaps/default/keymap.c

@@ -0,0 +1,75 @@
+/* Copyright 2018 Jumail Mundekkat / MxBlue
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+    KC_GESC, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC,          KC_INS, KC_PGUP,
+    KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL, KC_PGDN,
+    KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT,
+	  KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH,          KC_RSFT,                   KC_UP,
+	  KC_LCTL, KC_LGUI,KC_LALT,                    KC_SPC,                             KC_RALT, MO(1),   KC_RCTL,                    KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [1] = LAYOUT(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,           KC_PSCR, KC_HOME,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_END,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS,
+  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END,  KC_TRNS,          KC_TRNS,                   KC_TRNS,
+  	RESET,   KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS, KC_APP,                    KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/handwired/jn68m/readme.md

@@ -0,0 +1,14 @@
+# JN68M
+
+A custom replacement PCB for the VA68M and a birthday present for a mate.  
+PCB designed by /u/Xelus22
+
+Keyboard Maintainer: [MxBlue](https://github.com/mxblu)  
+Hardware Supported: ATMega32u4  
+Hardware Availability: Unavailable unless you happen to be Justin ;)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/jn68m:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/jn68m/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/handwired/pteron/config.h

@@ -0,0 +1,34 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    QMK Community
+#define PRODUCT         Pteron Keyboard
+#define DESCRIPTION     Pteron Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D7, E6, B4, B5, B6 }
+#define MATRIX_COL_PINS { F4, F6, F5, F7, B1, B3, C6, D4, D0, D1, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5  // 5 is default
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS

keyboards/handwired/pteron/keymaps/FSund/keymap.c

@@ -0,0 +1,118 @@
+#include QMK_KEYBOARD_H
+
+enum pteron_layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+// use S() to produce shifted versions of keys
+// #define S(kc) LSFT(kc) // defined by default
+
+// alt gr
+#define G(kc) RALT(kc)
+
+// custom keycodes
+// use F_ prefix to avoid problems
+
+// NB! I use Norwegian keyboard layout on my machines, so the keymap probably
+// doesn't make much sense for US/ANSI users
+
+#define F_FSLH S(KC_7) // forward slash
+#define F_BSLH KC_EQL // backward slash
+#define F_EQL S(KC_0) // equals sign
+#define F_APOS KC_BSLS // '
+#define F_TIMES S(KC_BSLS) // *
+#define F_PLUS KC_MINS // +
+#define F_QUEST S(KC_MINS) // ?
+#define F_HAT S(KC_RBRC) // ^
+#define F_TILD G(KC_RBRC) // ~
+#define F_UML KC_RBRC // ¨ (umlaut)
+#define F_SECT S(KC_GRV) // section sign ("law sign") (shifted key below esc)
+#define F_GRAVE S(KC_EQL)
+#define F_ACUTE G(KC_EQL)
+
+#define KC_AA KC_LBRC
+#define KC_OE KC_SCLN
+#define KC_AE KC_QUOT
+
+// brackets
+#define F_SBRL G(KC_8) // square bracket left
+#define F_SBRR G(KC_9) // square bracket right
+#define F_CBRL G(KC_7) // curly bracket left
+#define F_CBRR G(KC_0) // curly bracket right
+#define F_RBRL S(KC_8) // round bracket left
+#define F_RBRR S(KC_9) // round bracket right
+#define F_ABRL KC_NUBS // angle bracket left
+#define F_ABRR S(KC_NUBS) // angle bracket right
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * +-----------------------------------------+                                +-----------------------------------------+
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |                                |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------|                                |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |                                |   Y  |   U  |   I  |   O  |   P  |   Å  |
+ * |------+------+------+------+------+------|                                |------+------+------+------+------+------|
+ * | Ctrl |   A  |   S  |   D  |   F  |   G  |                                |   H  |   J  |   K  |   L  |   Ø  |   Æ  |
+ * |------+------+------+------+------+------|                                |------+------+------+------+------+------|
+ * | Shft |   Z  |   X  |   C  |   V  |   B  |                                |   N  |   M  |   ,  |   .  |   -  | Shft |
+ * +---------------------------+------+------+-------------+    +-------------+------+------+---------------------------+
+ *                             | LOWR | Spc  | Alt  | Win  |    | Win  | Alt  | Spc  | RISE |
+ *                             +---------------------------+    +---------------------------+
+ */
+
+[_QWERTY] = LAYOUT(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,             KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_AA, 
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,    KC_J,    KC_K,    KC_L,    KC_OE,   KC_AE, 
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,             KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSHIFT,
+                          LOWER,   KC_SPC,  KC_LALT, KC_LGUI,          KC_RGUI, KC_RALT, KC_ENT,  RAISE
+    ),
+
+/* LOWER
+ * +-----------------------------------------+                                +-----------------------------------------+
+ * |      |      |      |      |      |      |                                |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                                |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |                                |   \  |   /  |   [  |   ]  |   =  | Del  |
+ * |------+------+------+------+------+------|                                |------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |                                |   <  |   >  |   (  |   )  |   *  |   ~  |
+ * |------+------+------+------+------+------|                                |------+------+------+------+------+------|
+ * |      |  F6  |  F7  |  F8  |  F9  |  F10 |                                |  F11 |  F12 |   {  |   }  |   +  |      |
+ * +---------------------------+------+------+-------------+    +-------------+------+------+---------------------------+
+ *                             |      |      |      |      |    |      |      |      |      |
+ *                             +---------------------------+    +---------------------------+
+ */
+
+[_LOWER] = LAYOUT(
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, 
+        _______, _______, _______, _______, _______, _______,          F_BSLH,  F_FSLH,  F_SBRL,  F_SBRR,  F_EQL,   KC_DEL, 
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,            F_ABRL,  F_ABRR,  F_RBRL,  F_RBRR,  F_TIMES, F_TILD, 
+        _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,           KC_F11,  KC_F12,  F_CBRL,  F_CBRR,  F_PLUS,  _______,
+                          _______, _______, _______, _______,          _______, _______, _______, _______
+    ),
+
+[_RAISE] = LAYOUT(
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, 
+        _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_AA,  
+        F_SECT,  S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5),          F_QUEST, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, F_APOS, 
+        _______, S(KC_6), G(KC_2), G(KC_3), G(KC_4), G(KC_5),          F_HAT,   KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______,
+                          _______, _______, _______, _______,          _______, _______, _______, _______
+    ),
+
+[_ADJUST] = LAYOUT(
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, 
+        _______, F_UML,   F_GRAVE, F_ACUTE, _______, RESET,            _______, _______, _______, _______, KC_PSCR, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, _______,
+                          _______, _______, _______, _______,          _______, _______, _______, _______
+    )
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}

keyboards/handwired/pteron/keymaps/default/keymap.c

@@ -0,0 +1,104 @@
+#include QMK_KEYBOARD_H
+
+enum pteron_layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * +-----------------------------------------+      +-----------------------------------------+
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |      |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |      |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |      |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * +-------------+------+------+------+------|      |------+------+------+------+-------------+
+ *               |Lower | SPC  | Alt  | GUI  |      | Alt  | GUI  | SPC  |Raise |
+ *               +---------------------------+      +---------------------------+
+ */
+[_QWERTY] = LAYOUT( \
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,            KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,  \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,            KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,            KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  \
+                    LOWER,   KC_SPC,  KC_LALT, KC_LGUI,         KC_RALT, KC_RGUI, KC_SPC,  RAISE \
+),
+
+/* Lower
+ * +-----------------------------------------+      +-----------------------------------------+
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |      |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |      |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |  F12 |ISO ~ |ISO | |      |      |      |
+ * +-------------+------+------+------+------|      |------+------+------+------+-------------+
+ *               |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ *               +---------------------------+      +---------------------------+
+ */
+[_LOWER] = LAYOUT( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,         KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,         KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,           KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,          KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, \
+                    _______, _______, _______, _______,         KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * +-----------------------------------------+      +-----------------------------------------+
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |  F12 |ISO # |ISO / |      |      |      |
+ * +-------------+------+------+------+------|      |------+------+------+------+-------------+
+ *               |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ *               +---------------------------+      +---------------------------+
+ */
+[_RAISE] = LAYOUT( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,           KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,          KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \
+                    _______, _______, _______, _______,         KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+),
+
+/* Adjust (Lower + Raise)
+ * +-----------------------------------------+      +-----------------------------------------+
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      |      |      |Aud on|AudOff|AGnorm|      |AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|MusOff|MidiOn|      |MidOff|      |      |      |      |      |
+ * +-------------+------+------+------+------|      |------+------+------+------+-------------+
+ *               |      |      |      |      |      |      |      |      |      |      
+ *               +---------------------------+      +---------------------------+
+ */
+[_ADJUST] = LAYOUT( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,           KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
+  _______, RESET,   DEBUG,   _______, _______, _______,         _______, _______, _______, _______, _______, KC_DEL,  \
+  _______, _______, _______, _______, _______, _______,         _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______,         _______, _______, _______, _______, _______, _______, \
+                    _______, _______, _______, _______,         _______, _______, _______, _______  \
+)
+
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}

keyboards/handwired/pteron/pteron.c

@@ -0,0 +1 @@
+#include "pteron.h"

keyboards/handwired/pteron/pteron.h

@@ -0,0 +1,17 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, \
+	            K402, K403, K404, K405, K406, K407, K408, K409  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311 }, \
+	{ KC_NO, KC_NO, K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  KC_NO, KC_NO }  \
+}

keyboards/handwired/pteron/readme.md

@@ -0,0 +1,15 @@
+# Pteron
+
+![Pteron](https://i.imgur.com/9QhPlVD.jpg)
+
+An ergonomic keyboard heavily inspired by the [Atreus](https://github.com/technomancy/atreus), [Iris](https://github.com/keebio/iris-case) and [Atreis](https://github.com/dekonnection/atreis) keyboards. More info and files for laser cutting plates and case are in the [Pteron repository](https://github.com/FSund/pteron-keyboard).
+
+Keyboard Maintainer: [Filip Sund](https://github.com/FSund)  
+Hardware Supported: Pro Micro  
+Hardware Availability: Handwired, no PCB's available (for now)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/pteron:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/pteron/rules.mk

@@ -0,0 +1,58 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no
+UNICODE_ENABLE = no
+UNICODEMAP_ENABLE = no

keyboards/helix/config.h

@@ -48,17 +48,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define DISABLE_LEADER
 #endif // USE_Link_Time_Optimization
 
-#if defined(LED_ANIMATIONS) || defined(RGBLIGHT_ANIMATIONS)
-   #undef RGBLIGHT_ANIMATIONS
-   #define RGBLIGHT_EFFECT_BREATHING
-   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-   #define RGBLIGHT_EFFECT_SNAKE
-   #define RGBLIGHT_EFFECT_KNIGHT
-   #define RGBLIGHT_EFFECT_CHRISTMAS
-   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-   #define RGBLIGHT_EFFECT_RGB_TEST
-   #define RGBLIGHT_EFFECT_ALTERNATING
-#endif
-
 #endif /* CONFIG_H */

keyboards/helix/rev2/keymaps/five_rows/config.h

@@ -21,12 +21,27 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-// if you need more program area, try uncomment follow line
-//#include "serial_config_simpleapi.h"
-
 #undef TAPPING_TERM
-#define TAPPING_TERM 140
+#define TAPPING_TERM 300
+#define PERMISSIVE_HOLD
+/* when TAPPING_TERM >= 500 same effect PERMISSIVE_HOLD.
+   see tmk_core/common/action_tapping.c */
 
 // place overrides here
 
+// If you need more program area, try select and reduce rgblight modes to use.
+
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   //#define RGBLIGHT_EFFECT_SNAKE
+   //#define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/five_rows/keymap.c

@@ -10,6 +10,9 @@
 #ifdef SSD1306OLED
   #include "ssd1306.h"
 #endif
+#ifdef CONSOLE_ENABLE
+  #include <print.h>
+#endif
 
 extern keymap_config_t keymap_config;
 
@@ -28,6 +31,7 @@ enum layer_number {
     _QWERTY = 0,
     _COLEMAK,
     _DVORAK,
+    _EUCALYN,
     _KEYPAD,
     _AUX,
     _KAUX,
@@ -41,6 +45,7 @@ enum custom_keycodes {
   QWERTY = SAFE_RANGE,
   COLEMAK,
   DVORAK,
+  EUCALYN,
   KEYPAD,
   EISU,
   KANA,
@@ -72,7 +77,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
    * | Shift|   Z  |   X  |   C  |   V  |   B  |   `  |   '  |   N  |   M  |   ,  |   .  |   /  | Shift|
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |Lower | Lower| Caps  | GUI  | Alt | Space|  BS  | Enter| Space| Alt  | GUI  | Menu |Lower |Lower |
+   * |Lower | Lower| Caps |  Alt |  GUI | Space|  BS  | Enter| Space| GUI  | Alt  | Menu |Lower |Lower |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_QWERTY] = LAYOUT( \
@@ -94,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
    * | Shift|   Z  |   X  |   C  |   V  |   B  |   `  |   '  |   K  |   M  |   ,  |   .  |   /  | Shift|
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |Lower | Lower| Caps  | GUI  | Alt | Space|  BS  | Enter| Space| Alt  | GUI  | Menu |Lower |Lower |
+   * |Lower | Lower| Caps |  Alt |  GUI | Space|  BS  | Enter| Space| GUI  | Alt  | Menu |Lower |Lower |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_COLEMAK] = LAYOUT( \
@@ -116,7 +121,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
    * | Shift|   ;  |   Q  |   J  |   K  |   X  |   `  |   /  |   B  |   M  |   W  |   V  |   Z  | Shift|
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |Lower | Lower| Caps  | GUI  | Alt | Space|  BS  | Enter| Space| Alt  | GUI  | Menu |Lower |Lower |
+   * |Lower | Lower| Caps |  Alt |  GUI | Space|  BS  | Enter| Space| GUI  | Alt  | Menu |Lower |Lower |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_DVORAK] = LAYOUT( \
@@ -128,6 +133,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                          LT(_RAISE,KC_ENT), KC_SPC,  KC_RGUI, KC_RALT, KC_APP,MO(_LOWER),MO(_LOWER) \
       ),
 
+  /* Eucalyn (http://eucalyn.hatenadiary.jp/entry/about-eucalyn-layout)
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | ESC  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   ,  |   .  |   ;  |             |   M  |   R  |   D  |   Y  |   P  |  \   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   O  |   E  |   I  |   U  |             |   G  |   T  |   K  |   S  |   N  | Ctrl |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   F  |   `  |   '  |   B  |   H  |   J  |   L  |   /  | Shift|
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |Lower | Lower| Caps |  Alt |  GUI | Space|  BS  | Enter| Space| GUI  | Alt  | Menu |Lower |Lower |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_EUCALYN] = LAYOUT( \
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+      KC_TAB,  KC_Q,    KC_W,    KC_COMM, KC_DOT,  KC_SCLN,                   KC_M,    KC_R,    KC_D,    KC_Y,    KC_P,    KC_BSLS, \
+      KC_LCTL, KC_A,    KC_O,    KC_E,    KC_I,    KC_U,                      KC_G,    KC_T,    KC_K,    KC_S,    KC_N,    KC_RCTL, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,   KC_GRV,  KC_QUOT,  KC_B,    KC_H,    KC_J,    KC_L,    KC_SLSH, KC_RSFT, \
+      MO(_LOWER),MO(_LOWER),  KC_CAPS, KC_LALT, KC_LGUI, KC_SPC,  LT(_RAISE,KC_BSPC), \
+                                                         LT(_RAISE,KC_ENT), KC_SPC,  KC_RGUI, KC_RALT, KC_APP,MO(_LOWER),MO(_LOWER) \
+      ),
+
   /* Keypad
    * ,-----------------------------------------.             ,-----------------------------------------.
    * | Tab  |   /  |   *  | Del  |  F1  |  F6  |             |  F1  |  F6  | Del  | Tab  |   /  |   *  |
@@ -239,7 +266,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Adjust (Lower + Raise)
    * ,-----------------------------------------.             ,-----------------------------------------.
-   * |      |      |Keypad|Dvorak|Colemk|Qwerty|             |Qwerty|Colemk|Dvorak|Keypad|      |      |
+   * |      |Keypad|Dvorak|Colemk|Euclyn|Qwerty|             |Qwerty|Euclyn|Colemk|Dvorak|Keypad|      |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
    * |      | Reset|RGBRST|RGB ON|Aud on| Win  |             | Win  |Aud on|RGB ON|RGBRST|      |      |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
@@ -251,7 +278,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-------------------------------------------------------------------------------------------------'
    */
   [_ADJUST] =  LAYOUT( \
-      XXXXXXX, XXXXXXX, KEYPAD,   DVORAK, COLEMAK,  QWERTY,                   QWERTY,  COLEMAK,  DVORAK,  KEYPAD, XXXXXXX, XXXXXXX, \
+      XXXXXXX, KEYPAD,  DVORAK,  COLEMAK, EUCALYN,  QWERTY,                   QWERTY,  EUCALYN, COLEMAK,  DVORAK,  KEYPAD, XXXXXXX, \
       XXXXXXX, RESET,   RGBRST,  RGB_TOG,   AU_ON, AG_SWAP,                   AG_SWAP,   AU_ON, RGB_TOG,  RGBRST, XXXXXXX, XXXXXXX, \
       RGB_HUI, RGB_SAI, RGB_VAI,RGB_SMOD,  AU_OFF, AG_NORM,                   AG_NORM,  AU_OFF,RGB_SMOD, RGB_VAI, RGB_SAI, RGB_HUI, \
       RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, RGB_VAD, RGB_SAD, RGB_HUD, \
@@ -304,23 +331,25 @@ uint32_t default_layer_state_set_kb(uint32_t state) {
     current_default_layer = state - 1;
     // 1<<_DVORAK  - 2 == 4 - 2 == _DVORAK (=2)
     if ( current_default_layer == 3 ) current_default_layer -= 1;
-    // 1<<_KEYPAD  - 5 == 8 - 5 == _KEYPAD (=3)
+    // 1<<_EUCALYN - 5 == 8 - 5 == _EUCALYN (=3)
     if ( current_default_layer == 7 ) current_default_layer -= 4;
+    // 1<<_KEYPAD  - 12 == 16 - 12 == _KEYPAD (=4)
+    if ( current_default_layer == 15 ) current_default_layer -= 11;
     return state;
 }
 
 void update_base_layer(int base)
 {
     if( current_default_layer != base ) {
-	eeconfig_update_default_layer(1UL<<base);
-	default_layer_set(1UL<<base);
-	layer_off(_AUX);
-	layer_off(_KAUX);
+        eeconfig_update_default_layer(1UL<<base);
+        default_layer_set(1UL<<base);
+        layer_off(_AUX);
+        layer_off(_KAUX);
     } else {
-	if( base < _KEYPAD )
-	    layer_invert(_AUX);
-	else
-	    layer_invert(_KAUX);
+        if( base < _KEYPAD )
+            layer_invert(_AUX);
+        else
+            layer_invert(_KAUX);
     }
 }
 
@@ -331,7 +360,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef AUDIO_ENABLE
           PLAY_SONG(tone_qwerty);
         #endif
-	update_base_layer(_QWERTY);
+        update_base_layer(_QWERTY);
       }
       return false;
       break;
@@ -340,7 +369,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef AUDIO_ENABLE
           PLAY_SONG(tone_colemak);
         #endif
-	update_base_layer(_COLEMAK);
+        update_base_layer(_COLEMAK);
       }
       return false;
       break;
@@ -349,7 +378,16 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef AUDIO_ENABLE
           PLAY_SONG(tone_dvorak);
         #endif
-	update_base_layer(_DVORAK);
+        update_base_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case EUCALYN:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_dvorak);
+        #endif
+        update_base_layer(_EUCALYN);
       }
       return false;
       break;
@@ -358,7 +396,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef AUDIO_ENABLE
           PLAY_SONG(tone_dvorak);
         #endif
-	update_base_layer(_KEYPAD);
+        update_base_layer(_KEYPAD);
       }
       return false;
       break;
@@ -468,10 +506,10 @@ static void render_logo(struct CharacterMatrix *matrix) {
   char buf[30];
   if(rgblight_config.enable) {
       snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
-	       rgblight_config.mode,
-	       rgblight_config.hue/RGBLIGHT_HUE_STEP,
-	       rgblight_config.sat/RGBLIGHT_SAT_STEP,
-	       rgblight_config.val/RGBLIGHT_VAL_STEP);
+               rgblight_config.mode,
+               rgblight_config.hue/RGBLIGHT_HUE_STEP,
+               rgblight_config.sat/RGBLIGHT_SAT_STEP,
+               rgblight_config.val/RGBLIGHT_VAL_STEP);
       matrix_write(matrix, buf);
   }
 #endif
@@ -481,6 +519,7 @@ static void render_logo(struct CharacterMatrix *matrix) {
 static const char Qwerty_name[]  PROGMEM = " Qwerty";
 static const char Colemak_name[] PROGMEM = " Colemak";
 static const char Dvorak_name[]  PROGMEM = " Dvorak";
+static const char Eucalyn_name[] PROGMEM = " Eucalyn";
 static const char Keypad_name[]  PROGMEM = " Keypad";
 
 static const char AUX_name[]     PROGMEM = ":AUX";
@@ -494,6 +533,7 @@ static const char *layer_names[] = {
     [_QWERTY] = Qwerty_name,
     [_COLEMAK] = Colemak_name,
     [_DVORAK] = Dvorak_name,
+    [_EUCALYN]= Eucalyn_name,
     [_KEYPAD] = Keypad_name,
     [_AUX]    = AUX_name,
     [_KAUX]   = KAUX_name,
@@ -526,18 +566,18 @@ void render_status(struct CharacterMatrix *matrix) {
        lstate && name_num < sizeof(layer_names)/sizeof(char *);
        lstate >>=1, name_num++ ) {
       if( (lstate & 1) != 0 ) {
-	  if( layer_names[name_num] ) {
-	      matrix_write_P(matrix, layer_names[name_num]);
-	  }
+          if( layer_names[name_num] ) {
+              matrix_write_P(matrix, layer_names[name_num]);
+          }
       }
   }
 
   // Host Keyboard LED Status
   char led[40];
     snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+             (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+             (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+             (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
   matrix_write(matrix, led);
 }
 

keyboards/helix/rev2/keymaps/five_rows/rules.mk

@@ -6,8 +6,12 @@
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
+# CONSOLE_ENABLE and COMMAND_ENABLE
+#      yes, no  +1500
+#      yes, yes +3200
+#      no,  yes +400
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
@@ -66,6 +70,9 @@ ifneq ($(strip $(HELIX)),)
   ifeq ($(findstring ios,$(HELIX)), ios)
     IOS_DEVICE_ENABLE = yes
   endif
+  ifeq ($(findstring console,$(HELIX)), console)
+    CONSOLE_ENABLE = yes
+  endif
   $(eval $(call HELIX_CUSTOMISE_MSG))
   $(info )
 endif
@@ -100,7 +107,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)
@@ -115,6 +122,10 @@ ifeq ($(strip $(Link_Time_Optimization)),yes)
     EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
 endif
 
+ifeq ($(strip $(CONSOLE_ENABLE)),yes)
+    EXTRAFLAGS += -DCONSOLE_ENABLE
+endif
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/helix/rev2/keymaps/led_test/config.h

@@ -26,14 +26,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // If you need more program area, try select and reduce rgblight modes to use.
 
 // Selection of RGBLIGHT MODE to use.
-#undef RGBLIGHT_EFFECT_BREATHING
-#undef RGBLIGHT_EFFECT_RAINBOW_MOOD
-#undef RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#undef RGBLIGHT_EFFECT_SNAKE
-#undef RGBLIGHT_EFFECT_KNIGHT
-#undef RGBLIGHT_EFFECT_CHRISTMAS
-#undef RGBLIGHT_EFFECT_STATIC_GRADIENT
-//#undef RGBLIGHT_EFFECT_RGB_TEST // led_test keymap need only this.
-#undef RGBLIGHT_EFFECT_ALTERNATING
+#if defined(LED_ANIMATIONS)
+   //#define RGBLIGHT_EFFECT_BREATHING
+   //#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   //#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   //#define RGBLIGHT_EFFECT_SNAKE
+   //#define RGBLIGHT_EFFECT_KNIGHT
+   //#define RGBLIGHT_EFFECT_CHRISTMAS
+   //#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   #define RGBLIGHT_EFFECT_RGB_TEST   // led_test keymap need only this.
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif
 
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/led_test/rules.mk

@@ -100,7 +100,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)

keyboards/hhkb/rn42/rn42.c

@@ -1,7 +1,7 @@
 #include <avr/io.h>
 #include "host.h"
 #include "host_driver.h"
-#include "serial.h"
+#include "../serial.h"
 #include "rn42.h"
 #include "print.h"
 #include "timer.h"

keyboards/iris/keymaps/gsigler/config.h

@@ -0,0 +1,33 @@
+/*
+Copyright 2018 Grady Sigler <gradysigler@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define AUTO_SHIFT_TIMEOUT 95
+#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped this number of times again. */
+#define ONESHOT_TIMEOUT 5000  /* Time (in ms) before the one shot key is released */

keyboards/iris/keymaps/gsigler/keymap.c

@@ -0,0 +1,74 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+enum iris_layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+  //|   `/~  |   1    |   2    |   3    |    4   |    5   |                          |    6   |   7    |   8    |   9    |   0    |   _/-  |
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|  TAB   |   Q    |   W    |   E    |    R   |    T   |                          |    Y   |   U    |   I    |   O    |   P    |   +/=  |
+     KC_TAB,   KC_Q,     KC_W,     KC_E,   KC_R,    KC_T,                               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_EQL,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //| RAISE  |   A    |   S    |   D    |    F   |    G   |                          |    H   |   J    |   K    |   L    |   :/;  |   "/'  |
+      RAISE,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                               KC_H,    KC_J,    KC_K,    KC_L,   KC_SCLN, KC_QUOT,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+  //| LOWER  |   Z    |   X    |   C    |    V   |    B   |   ESC  |        | ALT    |    N   |   M    |   </,  |  >/.   |  ?-/   |   |-\  |
+      LOWER,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,   KC_ESC,            KC_LALT,  KC_N,    KC_M,  KC_COMM, KC_DOT,   KC_SLSH, KC_BSLS,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+  //                               |  CTRL  | COMMAND| BKSPACE|                 | SPACE  |  ENTER | SHIFT  |
+                                     KC_LCTL, KC_LGUI, KC_BSPC,                    KC_SPC,  KC_ENT,  KC_LSFT
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+//KC_LALT  ALT
+  [_RAISE] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+  //|  `/~   |   F1   |   F2   |   F3   |    F4  |   F5   |                          |   F6   |   F7   |   F8   |   F9   |   F10  |   F11  |
+     KC_TRNS,  KC_F1,    KC_F2,  KC_F3,   KC_F4,   KC_F5,                              KC_F6,    KC_F7,   KC_F8,  KC_F9,   KC_F10,  KC_F11,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|  TAB   |    !   |    @   |   {    |   }    |    |   |                          |        |        |   ↑    |        |        |   F12  |
+     KC_TRNS, KC_EXLM,   KC_AT,  KC_LCBR, KC_RCBR, KC_PIPE,                           XXXXXXX, XXXXXXX,  KC_UP,  XXXXXXX, XXXXXXX, KC_F12,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|  RAISE |    #   |    $   |   (    |   )    |    `   |                          |   ?    |    ←   |   ↓    |    →   |        |  VOLUP |
+      KC_TRNS,  KC_HASH, KC_DLR, KC_LPRN, KC_RPRN,  KC_GRV,                            KC_QUES, KC_LEFT,KC_DOWN, KC_RGHT, XXXXXXX,  KC__VOLUP,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+  //|        |    %   |    ^   |   [    |   ]    |    ~   |  ESC            | ALT  |    &   |        |        |        |  MUTE  |  VOLDN |
+     XXXXXXX, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD,  KC_TRNS,          KC_TRNS, KC_AMPR, XXXXXXX, XXXXXXX,XXXXXXX, KC__MUTE,KC__VOLDOWN,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+  //                               |  CTRL  | COMMAND| BKSPACE|                 | SPACE  |  ENTER | SHIFT|
+                                    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,  KC_TRNS, KC_TRNS
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+  [_LOWER] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+  //|        |        |        |        |        |        |                          |        |   7    |    8   |    9   |    *   |    /   |
+     KC_ASUP, KC_ASON, KC_ASRP,  XXXXXXX, XXXXXXX, XXXXXXX,                           XXXXXXX,   KC_P7,   KC_P8,   KC_P9,  KC_PAST, KC_PSLS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|        |        |        |        |        |        |                          |        |    4   |    5   |    6   |    +   |    -    |
+     KC_ASDN, KC_ASOFF, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,                            XXXXXXX,  KC_P4,   KC_P5,   KC_P6,  KC_PPLS, KC_PMNS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|        |        |        |        |        |        |                          |        |    1   |    2   |    3   |        |        |
+     XXXXXXX, KC_ASTG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                             XXXXXXX,  KC_P1,   KC_P2,   KC_P3,  XXXXXXX, XXXXXXX,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+  //| LOWER  |        |        |        |        |        |  ESC   |        | ALT    |        |   0    |    .   | ENTER  |   =    |        |
+      KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TRNS,         KC_TRNS,  XXXXXXX, KC_P0,   KC_PDOT, KC_PENT, KC_PEQL, XXXXXXX,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+  //                               |  CTRL  | COMMAND| BKSPACE |                 | SPACE  | ENTER  | SHIFT  |
+                                    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+};

keyboards/iris/keymaps/gsigler/rules.mk

@@ -0,0 +1,3 @@
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+AUTO_SHIFT_ENABLE = yes

keyboards/kbd4x/info.json

@@ -53,7 +53,7 @@
               {"label":"/", "x":8, "y":3},
               {"label":"LEFT", "x":9, "y":3},
               {"label":"DOWN", "x":10, "y":3},
-              {"label":"RIGHT", "x":11, "y":3},
+              {"label":"RIGHT", "x":11, "y":3}
             ]
         },
         "LAYOUT_ortho_4x12": {
@@ -105,7 +105,7 @@
               {"label":"/", "x":8, "y":3},
               {"label":"LEFT", "x":9, "y":3},
               {"label":"DOWN", "x":10, "y":3},
-              {"label":"RIGHT", "x":11, "y":3},
+              {"label":"RIGHT", "x":11, "y":3}
             ]
         }
     }

keyboards/mechmini/v1/keymaps/pitty/keymap.c

@@ -0,0 +1,54 @@
+/*
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+#define _QWERTY 0
+#define _NMBR 1
+#define _NAV 2
+#define _MOUSE 3
+#define _FUNCT 4
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [_QWERTY] = LAYOUT_split_space(
+     KC_TAB,     KC_Q,       KC_W,       KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,      KC_P,     KC_BSPC,
+     KC_ESC,     KC_A,       KC_S,       KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,      LT(_FUNCT, KC_ENT),
+     KC_LSFT,    KC_Z,       KC_X,       KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,    KC_SLSH,
+     KC_LCTL,    KC_LGUI,    KC_LALT,         LT(_NAV, KC_SPC),         KC_BSPC,    KC_RALT,             TT(_MOUSE),   TT(_NMBR)
+   ),
+   [_NAV] = LAYOUT_split_space(
+     _______,      _______,    KC_UP,      _______,  KC_LPRN,    KC_RPRN,    _______,   KC_7,     KC_8,     KC_9,         KC_KP_SLASH,    KC_DEL,
+     _______,      KC_LEFT,    KC_DOWN,    KC_RIGHT, KC_LCBR,    KC_RCBR,    _______,   KC_4,     KC_5,     KC_6,         KC_KP_ASTERISK,
+     _______,      _______,    _______,    _______,  KC_LABK,    KC_RABK,    KC_GRV,    KC_1,     KC_2,     KC_3,         KC_KP_MINUS,
+     _______,      _______,    _______,          _______,      _______,       _______,                   KC_KP_DOT,  KC_KP_PLUS
+   ),
+   [_NMBR] = LAYOUT_split_space(
+     KC_GRAVE,   KC_1,       KC_2,       KC_3,    KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINUS,
+     _______,    KC_4,       KC_5,       KC_6,    _______,  _______,  _______,  _______,  _______,  _______,  _______,
+     _______,    KC_7,       KC_8,       KC_9,    _______,  _______,  _______,  _______,  _______,  _______,  _______,
+     _______,    _______,    _______,          _______,        TO(_QWERTY),       _______,                 _______,    _______
+   ),
+    [_MOUSE] = LAYOUT_split_space(
+     _______,   KC_BTN1,      KC_MS_U,     KC_BTN2,  _______,    _______,    _______,    _______,   KC_WH_U,   _______,   _______,     _______,
+     _______,   KC_MS_L,      KC_MS_D,     KC_MS_R,  _______,    _______,    _______,    KC_WH_L,   KC_WH_D,   KC_WH_R,   _______,
+     _______,   _______,      _______,     _______,  _______,    _______,    _______,    _______,   _______,   _______,   _______,
+     _______,   _______,      _______,            _______,        TO(_QWERTY),         _______,                   _______,    _______
+   ),
+   [_FUNCT] = LAYOUT_split_space(
+     KC_F1,        KC_F2,      KC_F3,      KC_F4,    KC_F5,      KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,     KC_F11,   KC_F12,
+     _______,      KC_INS,     KC_HOME,    KC_PGUP,  _______,    _______,    _______,    _______,    _______,    _______,    _______,
+     _______,      KC_DEL,     KC_END,     KC_PGDN,  _______,    _______,    _______,    _______,    _______,    _______,    _______,
+     _______,      _______,      _______,            RGB_TOG,        RGB_MOD,         _______,                   _______,    RESET
+   )
+};

keyboards/mechmini/v1/v1.h

@@ -40,4 +40,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO } \
 }
 
+#define LAYOUT_split_space( \
+    K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, \
+    K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, \
+    K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, \
+    K00, K10, K20,      K56, K57, KB0,           KC0, K66  \
+) \
+{ \
+    { K00, K10, K20, K56, KC_NO,    KC_NO,    K57, KC_NO,    KB0, KC0, K66, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO } \
+}
+
 #endif

keyboards/mint60/info.json

@@ -0,0 +1,78 @@
+{
+  "keyboard_name": "Mint60",
+  "url": "",
+  "maintainer": "eucalyn",
+  "width": 16,
+  "height": 5,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"label":"~", "x":0, "y":0},
+        {"label":"!", "x":1, "y":0},
+        {"label":"@", "x":2, "y":0},
+        {"label":"#", "x":3, "y":0},
+        {"label":"$", "x":4, "y":0},
+        {"label":"%", "x":5, "y":0},
+        {"label":"^", "x":7, "y":0},
+        {"label":"&", "x":8, "y":0},
+        {"label":"*", "x":9, "y":0},
+        {"label":"(", "x":10, "y":0},
+        {"label":")", "x":11, "y":0},
+        {"label":"_", "x":12, "y":0},
+        {"label":"+", "x":13, "y":0},
+        {"label":"Backspace", "x":14, "y":0, "w":2},
+        {"label":"Tab", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+        {"label":"Y", "x":7.5, "y":1},
+        {"label":"U", "x":8.5, "y":1},
+        {"label":"I", "x":9.5, "y":1},
+        {"label":"O", "x":10.5, "y":1},
+        {"label":"P", "x":11.5, "y":1},
+        {"label":"{", "x":12.5, "y":1},
+        {"label":"}", "x":13.5, "y":1},
+        {"label":"|", "x":14.5, "y":1, "w":1.5},
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+        {"label":"H", "x":7.75, "y":2},
+        {"label":"J", "x":8.75, "y":2},
+        {"label":"K", "x":9.75, "y":2},
+        {"label":"L", "x":10.75, "y":2},
+        {"label":":", "x":11.75, "y":2},
+        {"label":"\"", "x":12.75, "y":2},
+        {"label":"Enter", "x":13.75, "y":2, "w":2.25},
+        {"label":"Shift", "x":0, "y":3, "w":2},
+        {"label":"Z", "x":2, "y":3},
+        {"label":"X", "x":3, "y":3},
+        {"label":"C", "x":4, "y":3},
+        {"label":"V", "x":5, "y":3},
+        {"label":"B", "x":6, "y":3},
+        {"label":"N", "x":8, "y":3},
+        {"label":"M", "x":9, "y":3},
+        {"label":"<", "x":10, "y":3},
+        {"label":">", "x":11, "y":3},
+        {"label":"?", "x":12, "y":3},
+        {"label":"Shift", "x":13, "y":3},
+        {"label":"Up", "x":14, "y":3},
+        {"label":"Fn", "x":15, "y":3},
+        {"label":"Esc", "x":0, "y":4},
+        {"label":"Ctrl", "x":1, "y":4, "w":1.25},
+        {"label":"Win", "x":2.25, "y":4, "w":1.25},
+        {"label":"Alt", "x":3.5, "y":4, "w":1.25},
+        {"label":"Space", "x":4.75, "y":4, "w":2.25},
+        {"label":"Space", "x":7.75, "y":4, "w":2.75},
+        {"label":"Win", "x":10.5, "y":4, "w":1.25},
+        {"label":"Ctrl", "x":11.75, "y":4, "w":1.25},
+        {"label":"Left", "x":13, "y":4},
+        {"label":"Down", "x":14, "y":4},
+        {"label":"Right", "x":15, "y":4}]
+    }
+  }
+}

keyboards/mint60/keymaps/default/keymap.c

@@ -31,7 +31,7 @@ extern rgblight_config_t rgblight_config;
 #define XXXXXXX KC_NO
 
 enum custom_keycodes {
-  RGBRST
+  RGBRST = SAFE_RANGE
 };
 
 

keyboards/mint60/keymaps/eucalyn/keymap.c

@@ -31,7 +31,7 @@ extern rgblight_config_t rgblight_config;
 #define XXXXXXX KC_NO
 
 enum custom_keycodes {
-  RGBRST
+  RGBRST = SAFE_RANGE
 };
 
 

keyboards/mint60/readme.md

@@ -1,6 +1,6 @@
 # Mint60
 
-![Mint60](https://imgur.com/a/8xnTS4U)
+![Mint60](https://i.imgur.com/suOE8HN.jpg)
 
 A short description of the keyboard/project
 
@@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make mint60:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/model01/keymaps/dshields/config.h

@@ -1,5 +1,6 @@
 #pragma once
 
+#define RGB_MATRIX_KEYPRESSES
 #define RGB_DIGITAL_RAIN_DROPS    18
 #define USB_MAX_POWER_CONSUMPTION 100
 #define ONESHOT_TAP_TOGGLE        2

keyboards/model01/keymaps/dshields/rules.mk

@@ -1 +1,3 @@
 MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = no
+CONSOLE_ENABLE  = no

keyboards/namecard2x4/config.h

@@ -0,0 +1,223 @@
+/*
+Copyright 2018 takashiski
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    takashiski
+#define PRODUCT         namecard2x4
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B4,B5 }
+#define MATRIX_COL_PINS { E6,D7,C6,D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN F4
+#define RGBLED_NUM 4
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 10
+#define RGBLIGHT_VAL_STEP 10
+
+//#define BACKLIGHT_PIN F4 
+//#define BACKLIGHT_BREATHING
+//#define BACKLIGHT_LEVELS 1
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/namecard2x4/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "namecard2x4", 
+    "url": "https://skyhigh-works.hatenablog.com/", 
+    "maintainer": "takashiski", 
+    "bootloader": "atmel-dfu", 
+    "width": 4, 
+    "height": 2, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"1", "x":0, "y":0}, {"label":"2", "x":1, "y":0}, {"label":"3", "x":2, "y":0}, {"label":"4", "x":3, "y":0}, {"label":"5", "x":0, "y":1}, {"label":"6", "x":1, "y":1}, {"label":"7", "x":2, "y":1}, {"label":"8", "x":3, "y":1}]
+        }
+    }
+}

keyboards/namecard2x4/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 takashiski
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/namecard2x4/keymaps/default/keymap.c

@@ -0,0 +1,60 @@
+/* Copyright 2018 takashiski
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum Layer
+{
+	DF,
+	LW,
+	RS
+};
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[DF] = LAYOUT(
+		KC_1,KC_2,KC_3,LT(LW,KC_4),
+		KC_5,KC_6,KC_7,LT(RS,KC_8)
+		),
+[LW]= LAYOUT(
+	
+		RGB_VAD,RGB_VAI,RGB_HUI,RGB_HUD,
+		KC_TRNS,RGB_MOD,RGB_RMOD,KC_TRNS
+		),
+[RS]= LAYOUT(
+	
+		KC_MYCM,KC_MAIL,KC_VOLU,KC_MUTE,
+		KC_WSCH,KC_CALC,KC_VOLD,KC_TRNS
+		)
+
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/namecard2x4/keymaps/default/readme.md

@@ -0,0 +1,9 @@
+# The default keymap for namecard2x4
+
+this is test keymap.
+
+| 1 | 2 | 3 | 4 |
+| 5 | 6 | 7 | 8 |
+
+if hold 4, change to Backlight settings Layer.
+if hold 8, change to Windows action Layer(Open my computer, Open calculater and others).

keyboards/namecard2x4/namecard2x4.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 takashiski
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "namecard2x4.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/namecard2x4/namecard2x4.h

@@ -0,0 +1,33 @@
+/* Copyright 2018 takashiski
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef NAMECARD2X4_H
+#define NAMECARD2X4_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13   \
+) { \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+}
+
+#endif

keyboards/namecard2x4/readme.md

@@ -0,0 +1,24 @@
+# namecard2x4
+
+日本式名刺サイズのキーボードです（55x91mm）。
+Kailh PCB SocketとWS2812/SK6812に対応しています。
+
+This keyboard is Japanese namecard size(55x91mm) keyboard.
+
+namecard2x4 has 8 switch and kailh PCB socket.
+
+![namecard2x4](https://i.imgur.com/Bi9SV9A.jpg)
+
+![namecard2x4 with case](https://i.imgur.com/yTv1vSz.jpg)
+
+
+
+Keyboard Maintainer: [takashiski](https://github.com/takashiski)  
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make namecard2x4:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+

keyboards/namecard2x4/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+#UNICODEMAP_ENABLE = yes # for emoji user
+#RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips