fix the led_matrix.h naming conflict

* adding my planck keymap

* adding my planck keymap

* added my espectro keymap

* the50 keymap

common_features.mk

@@ -114,8 +114,27 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
-RGB_MATRIX_ENABLE ?= no
 VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
+
+LED_MATRIX_ENABLE ?= no
+ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
+    ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
+        $(error LED_MATRIX_ENABLE="$(LED_MATRIX_ENABLE)" is not a valid matrix type)
+    else
+        OPT_DEFS += -DLED_MATRIX_ENABLE -DBACKLIGHT_ENABLE -DBACKLIGHT_CUSTOM_DRIVER
+        SRC += $(QUANTUM_DIR)/led_matrix.c
+        SRC += $(QUANTUM_DIR)/led_matrix_drivers.c
+    endif
+endif
+
+ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
+    OPT_DEFS += -DIS31FL3731
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3731-simple.c
+    SRC += i2c_master.c
+endif
+
+RGB_MATRIX_ENABLE ?= no
 ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
 ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
     $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
@@ -191,7 +210,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
         CIE1931_CURVE = yes
     endif
-        ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+    ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
     endif
 endif

docs/_summary.md

@@ -40,6 +40,7 @@
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
   * [Configurator Support](reference_configurator_support.md)
+  * [info.json Format](reference_info_json.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)

docs/faq_build.md

@@ -37,6 +37,10 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
 
+### Serial device is not detected in bootloader mode on Linux
+Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as 
+Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
+
 ## Unknown Device for DFU Bootloader
 
 If you're using Windows to flash your keyboard, and you are running into issues, check the Device Manager.  If you see an "Unknown Device" when the keyboard is in "bootloader mode", then you may have a driver issue. 

docs/feature_advanced_keycodes.md

@@ -21,7 +21,7 @@ Additionally, if at least one right-handed modifier is specified in a Mod Tap or
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers) When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers). When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 

docs/feature_bootmagic.md

@@ -127,7 +127,9 @@ Additionally, you may want to specify which key to use.  This is especially usef
 
 By default, these are set to 0 and 0, which is usually the "ESC" key on a majority of keyboards.
 
-And to trigger the bootloader, you hold this key down when plugging the keyboard in. Just the single key. 
+And to trigger the bootloader, you hold this key down when plugging the keyboard in. Just the single key.
+
+!> Using bootmagic lite will **always reset** the EEPROM, so you will lose any settings that have been saved.
 
 ## Advanced Bootmagic Lite
 

docs/feature_combo.md

@@ -29,7 +29,7 @@ If you want to add a list, then you'd use something like this:
 enum combos {
   AB_ESC,
   JK_TAB
-}
+};
 const uint16_t PROGMEM ab_combo[] = {KC_A, KC_B, COMBO_END};
 const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END};
 

docs/feature_led_matrix.md

@@ -0,0 +1,90 @@
+# LED Matrix Lighting
+
+This feature allows you to use LED matrices driven by external drivers. It hooks into the backlight system so you can use the same keycodes as backlighting to control it.
+
+If you want to use RGB LED's you should use the [RGB Matrix Subsystem](feature_rgb_matrix.md) instead.
+
+## Driver configuration
+
+### IS31FL3731
+
+There is basic support for addressable LED matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
+
+    LED_MATRIX_ENABLE = IS31FL3731
+    
+You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `LED_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
+| `LED_DRIVER_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
+| `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | |
+| `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | |
+| `LED_DRIVER_ADDR_3` | (Optional) Address for the third LED driver | |
+| `LED_DRIVER_ADDR_4` | (Optional) Address for the fourth LED driver | |
+
+Here is an example using 2 drivers.
+
+	// This is a 7-bit address, that gets left-shifted and bit 0
+	// set to 0 for write, 1 for read (as per I2C protocol)
+	// The address will vary depending on your wiring:
+	// 0b1110100 AD <-> GND
+	// 0b1110111 AD <-> VCC
+	// 0b1110101 AD <-> SCL
+	// 0b1110110 AD <-> SDA
+	#define LED_DRIVER_ADDR_1 0b1110100
+	#define LED_DRIVER_ADDR_2 0b1110110
+
+	#define LED_DRIVER_COUNT 2
+	#define LED_DRIVER_1_LED_COUNT 25
+	#define LED_DRIVER_2_LED_COUNT 24
+	#define LED_DRIVER_LED_COUNT LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL
+
+Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
+
+Define these arrays listing all the LEDs in your `<keyboard>.c`:
+
+	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+	/* Refer to IS31 manual for these locations
+	 *   driver
+	 *   |  LED address
+	 *   |  | */
+	    {0, C3_3},
+	    ....
+	}
+
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731-simple.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` ).
+
+## Keycodes
+
+All LED matrix keycodes are currently shared with the [backlight system](feature_backlight.md).
+
+## LED Matrix Effects
+
+Currently no LED matrix effects have been created.
+
+## Custom layer effects
+
+Custom layer effects can be done by defining this in your `<keyboard>.c`:
+
+    void led_matrix_indicators_kb(void) {
+        led_matrix_set_index_value(index, value);
+    }
+
+A similar function works in the keymap as `led_matrix_indicators_user`.
+
+## Suspended state
+
+To use the suspend feature, add this to your `<keyboard>.c`:
+
+	void suspend_power_down_kb(void)
+	{
+	    led_matrix_set_suspend_state(true);
+	}
+
+	void suspend_wakeup_init_kb(void)
+	{
+	    led_matrix_set_suspend_state(false);
+	}

docs/feature_rgb_matrix.md

@@ -1,5 +1,9 @@
 # RGB Matrix Lighting
 
+This feature allows you to use RGB LED matrices driven by external drivers. It hooks into the RGBLIGHT system so you can use the same keycodes as RGBLIGHT to control it.
+
+If you want to use single color LED's you should use the [LED Matrix Subsystem](feature_led_matrix.md) instead.
+
 ## Driver configuration
 
 ### IS31FL3731

docs/hardware_keyboard_guidelines.md

@@ -1,20 +1,104 @@
 # QMK Keyboard Guidelines
 
-We welcome all keyboard projects into QMK, but ask that you try to stick to a couple guidelines that help us keep things organised and consistent.
+Since starting, QMK has grown by leaps and bounds thanks to people like you who contribute to creating and maintaining our community keyboards. As we've grown we've discovered some patterns that work well, and ask that you conform to them to make it easier for other people to benefit from your hard work.
+
 
 ## Naming Your Keyboard/Project
 
-All names should be lowercase alphanumeric, and separated by an underscore (`_`), but not begin with one. Your directory and your `.h` and `.c` files should have exactly the same name. All folders should follow the same format. `test`, `keyboard`, and `all` are reserved by make and are not a valid name for a keyboard.
+All keyboard names are in lower case, consisting only of letters, numbers, and underscore (`_`). Names may not begin with an underscore. Forward slash (`/`) is used as a sub-folder separation character.
 
-## `readme.md`
+The names `test`, `keyboard`, and `all` are reserved for make commands and may not be used as a keyboard or subfolder name.
 
-All projects need to have a `readme.md` file that explains what the keyboard is, who made it, where it is available, and links to more information. Please follow the [published template](documentation_templates.md#keyboard-readmemd-template).
+Valid Examples:
+
+* `412_64`
+* `chimera_ortho`
+* `clueboard/66/rev3`
+* `planck`
+* `v60_type_r`
+
+## Sub-folders
+
+QMK uses sub-folders both for organization and to share code between revisions of the same keyboard. You can nest folders up to 4 levels deep:
+
+    qmk_firmware/keyboards/top_folder/sub_1/sub_2/sub_3/sub_4
+
+If a sub-folder has a `rules.mk` file it will be considered a compilable keyboard. It will be available in QMK Configurator and tested with `make all`. If you are using a folder to organize several keyboards from the same maker you should not have a `rules.mk` file.
+
+Example:
+
+Clueboard uses sub-folders for both purposes, organization and keyboard revisions.
+
+* [`qmk_firmware`](https://github.com/qmk/qmk_firmware/tree/master)
+  * [`keyboards`](https://github.com/qmk/qmk_firmware/tree/master/keyboards)
+    * [`clueboard`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard)  ← This is the organization folder, there's no `rules.mk` file
+      * [`60`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/60)  ← This is a compilable keyboard, it has a `rules.mk` file
+      * [`66`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66) ← This is also compilable- it uses `DEFAULT_FOLDER` to specify `rev3` as the default revision
+        * [`rev1`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev1) ← compilable: `make clueboard/66/rev1`
+        * [`rev2`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev2) ← compilable: `make clueboard/66/rev2`
+        * [`rev3`](https://github.com/qmk/qmk_firmware/tree/master/keyboards/clueboard/66/rev3) ← compilable: `make clueboard/66/rev3` or `make clueboard/66`
+
+## Keyboard Folder Structure
+
+Your keyboard should be located in `qmk_firmware/keyboards/` and the folder name should be your keyboard's name as described in the previous section. Inside this folder should be several files:
+
+* `readme.md`
+* `info.json`
+* `config.h`
+* `rules.mk`
+* `<keyboard_name>.c`
+* `<keyboard_name>.h`
+
+### `readme.md`
+
+All projects need to have a `readme.md` file that explains what the keyboard is, who made it and where it's available. If applicable, it should also contain links to more information, such as the maker's website. Please follow the [published template](documentation_templates.md#keyboard-readmemd-template).
+
+### `info.json`
+
+This file is used by the [QMK API](https://github.com/qmk/qmk_api). It contains the information [QMK Configurator](https://config.qmk.fm/) needs to display a representation of your keyboard. You can also set metadata here. For more information see the [reference page](reference_info_json.md).
+
+### `config.h`
+
+All projects need to have a `config.h` file that sets things like the matrix size, product name, USB VID/PID, description and other settings. In general, use this file to set essential information and defaults for your keyboard that will always work.
+
+### `rules.mk`
+
+The presence of this file means that the folder is a keyboard target and can be used in `make` commands. This is where you setup the build environment for your keyboard and configure the default set of features.
+
+### `<keyboard_name.c>`
+
+This is where you will write custom code for your keyboard. Typically you will write code to initialize and interface with the hardware in your keyboard. If your keyboard consists of only a key matrix with no LEDs, speakers, or other auxillary hardware this file can be blank.
+
+The following functions are typically defined in this file:
+
+* `void matrix_init_kb(void)`
+* `void matrix_scan_kb(void)`
+* `bool process_record_kb(uint16_t keycode, keyrecord_t *record)`
+* `void led_set_kb(uint8_t usb_led)`
+
+### `<keyboard_name.h>`
+
+This file is used to define the matrix for your keyboard. You should define at least one C macro which translates an array into a matrix representing the physical switch matrix for your keyboard. If it's possible to build your keyboard with multiple layouts you should define additional macros.
+
+If you have only a single layout you should call this macro `LAYOUT`.
+
+When defining multiple layouts you should have a base layout, named `LAYOUT_all`, that supports all possible switch positions on your matrix, even if that layout is impossible to build physically. This is the macro you should use in your `default` keymap. You should then have additional keymaps named `default_<layout>` that use your other layout macros. This will make it easier for people to use the layouts you define.
+
+Layout macro names are entirely lowercase, except for the word `LAYOUT` at the front.
+
+As an example, if you have a 60% PCB that supports ANSI and ISO you might define the following layouts and keymaps:
+
+| Layout Name | Keymap Name | Description |
+|-------------|-------------|-------------|
+| LAYOUT_all | default | A layout that supports both ISO and ANSI |
+| LAYOUT_ansi | default_ansi | An ANSI layout |
+| LAYOUT_iso | default_iso | An ISO layout |
 
 ## Image/Hardware Files
 
-In an effort to keep the repo size down, we're no longer accepting images of any format in the repo, with few exceptions. Hosting them elsewhere (imgur) and linking them in the `readme.md` is the preferred method.
+In an effort to keep the repo size down we're no longer accepting binary files of any format, with few exceptions. Hosting them elsewhere (such as <https://imgur.com>) and linking them in the `readme.md` is preferred.
 
-Any sort of hardware file (plate, case, pcb) can't be stored in qmk_firmware, but we have the [qmk.fm repo](https://github.com/qmk/qmk.fm) where such files (as well as in-depth info) can be stored and viewed on [qmk.fm](http://qmk.fm). Downloadable files are stored in `/<keyboard>/` (name follows the same format as above) which are served at `http://qmk.fm/<keyboard>/`, and pages are generated from `/_pages/<keyboard>/` which are served at the same location (.md files are generated into .html files through Jekyll). Check out the `lets_split` directory for an example.
+Hardware files (such as plates, cases, pcb) can be contributed to the [qmk.fm repo](https://github.com/qmk/qmk.fm) and they will be made available on [qmk.fm](http://qmk.fm). Downloadable files are stored in `/<keyboard>/` (name follows the same format as above) which are served at `http://qmk.fm/<keyboard>/`, and pages are generated from `/_pages/<keyboard>/` which are served at the same location (.md files are generated into .html files through Jekyll). Check out the `lets_split` folder for an example.
 
 ## Keyboard Defaults
 
@@ -32,77 +116,6 @@ If your keyboard does not have 2 shift keys you should provide a working default
 
 As documented on [Customizing Functionality](custom_quantum_functions.md) you can define custom functions for your keyboard. Please keep in mind that your users may want to customize that behavior as well, and make it possible for them to do that. If you are providing a custom function, for example `process_record_kb()`, make sure that your function calls the `_user()` version of the call too. You should also take into account the return value of the `_user()` version, and only run your custom code if the user returns `true`.
 
-## Keyboard Metadata
-
-As QMK grows so does the ecosystem surrounding QMK. To make it easier for projects in that ecosystem to tie into QMK as we make changes we are developing a metadata system to expose information about keyboards in QMK.
-
-You can create `info.json` files at every level under `qmk_firmware/keyboards/<name>` to specify this metadata. These files are combined, with more specific files overriding keys in less specific files. This means you do not need to duplicate your metadata information. For example, `qmk_firmware/keyboards/clueboard/info.json` specifies `manufacturer` and `maintainer`, while `qmk_firmware/keyboards/clueboard/66/info.json` specifies more specific information about Clueboard 66%.
-
-### `info.json` Format
-
-The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
-
-* `keyboard_name`
-  * A free-form text string describing the keyboard.
-  * Example: `Clueboard 66%`
-* `url`
-  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
-* `maintainer`
-  * GitHub username of the maintainer, or `qmk` for community maintained boards
-* `width`
-  * Width of the board in Key Units
-* `height`
-  * Height of the board in Key Units
-* `layouts`
-  * Physical Layout representations. See the next section for more detail.
-
-#### Layout Format
-
-Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
-
-* `width`
-  * Optional: The width of the layout in Key Units
-* `height`
-  * Optional: The height of the layout in Key Units
-* `key_count`
-  * **Required**: The number of keys in this layout
-* `layout`
-  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
-
-#### Key Dictionary Format
-
-Each Key Dictionary in a layout describes the physical properties of a key. If you are familiar with the Raw Code for <http://keyboard-layout-editor.com> you will find many of the concepts the same. We re-use the same key names and layout choices wherever possible, but unlike keyboard-layout-editor each key is stateless, inheriting no properties from the keys that came before it.
-
-All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
-
-* `X`
-  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
-* `Y`
-  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
-* `W`
-  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
-* `H`
-  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
-* `R`
-  * How many degrees clockwise to rotate the key.
-* `RX`
-  * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x`
-* `RY`
-  * The absolute position of the point to rotate the key around in the vertical axis. Default: `y`
-* `KS`
-  * Key Shape: define a polygon by providing a list of points, in Key Units.
-  * **Important**: These are relative to the top-left of the key, not absolute.
-  * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]`
-
-### How is the Metadata Exposed?
-
-This metadata is primarily used in two ways:
-
-* To allow web-based configurators to dynamically generate UI
-* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter.
-
-Configurator authors can see the [QMK Compiler](https://docs.compile.qmk.fm/api_docs.html) docs for more information on using the JSON API.
-
 ## Non-Production/Handwired Projects
 
 We're happy to accept any project that uses QMK, including prototypes and handwired ones, but we have a separate `/keyboards/handwired/` folder for them, so the main `/keyboards/` folder doesn't get overcrowded. If a prototype project becomes a production project at some point in the future, we'd be happy to move it to the main `/keyboards/` folder!

docs/i2c_driver.md

@@ -33,8 +33,8 @@ The following defines can be used to configure the I2C master driver.
 
 |Variable          |Description                                        |Default|
 |------------------|---------------------------------------------------|-------|
-|`#F_SCL`          |Clock frequency in Hz                              |400KHz |
-|`#Prescaler`      |Divides master clock to aid in I2C clock selection |1      |
+|`F_SCL`           |Clock frequency in Hz                              |400KHz |
+|`Prescaler`       |Divides master clock to aid in I2C clock selection |1      |
 
 AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required.
 
@@ -63,20 +63,24 @@ Lastly, we need to assign the correct GPIO pins depending on the I2C hardware dr
 
 By default the I2C1 hardware driver is assumed to be used. If another hardware driver is used,  `#define I2C_DRIVER I2CDX` should be added to the `config.h` file with X being the number of hardware driver used. For example is I2C3 is enabled, the `config.h` file should contain `#define I2C_DRIVER I2CD3`. This aligns the QMK I2C driver with the Chibios I2C driver.
 
-STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C.
+STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C. You can use these defines to set your i2c pins:
 
-This can be changed by declaring the `i2c_init` function which intentionally has a weak attribute. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
+| Variable    | Description                                  | Default |
+|-------------|----------------------------------------------|---------|
+| `I2C1_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) | `GPIOB` |
+| `I2C1_SCL`  | The pin number for the SCL pin (0-9)         | `6`     |
+| `I2C1_SDA`  | The pin number for the SDA pin (0-9)         | `7`     |
+
+You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
 
 ```C
 void i2c_init(void)
 {
   setPinInput(B6); // Try releasing special pins for a short time
   setPinInput(B7);
-  chThdSleepMilliseconds(10); // Wait for the release to happen
+  wait_ms(10); // Wait for the release to happen
 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function
   palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function
 }
 ```
-
-

docs/reference_info_json.md

@@ -0,0 +1,73 @@
+# `info.json`
+
+This file is used by the [QMK API](https://github.com/qmk/qmk_api). It contains the information [QMK Configurator](https://config.qmk.fm/) needs to display a representation of your keyboard. You can also set metadata here.
+
+You can create `info.json` files at every level under `qmk_firmware/keyboards/<name>` to specify this metadata. These files are combined, with more specific files overriding keys in less specific files. This means you do not need to duplicate your metadata information. For example, `qmk_firmware/keyboards/clueboard/info.json` specifies `manufacturer` and `maintainer`, while `qmk_firmware/keyboards/clueboard/66/info.json` specifies more specific information about Clueboard 66%.
+
+## `info.json` Format
+
+The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
+
+* `keyboard_name`
+  * A free-form text string describing the keyboard.
+  * Example: `Clueboard 66%`
+* `url`
+  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
+* `maintainer`
+  * GitHub username of the maintainer, or `qmk` for community maintained boards
+* `width`
+  * Width of the board in Key Units
+* `height`
+  * Height of the board in Key Units
+* `layouts`
+  * Physical Layout representations. See the next section for more detail.
+
+### Layout Format
+
+Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
+
+* `width`
+  * Optional: The width of the layout in Key Units
+* `height`
+  * Optional: The height of the layout in Key Units
+* `key_count`
+  * **Required**: The number of keys in this layout
+* `layout`
+  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
+
+### Key Dictionary Format
+
+Each Key Dictionary in a layout describes the physical properties of a key. If you are familiar with the Raw Code for <http://keyboard-layout-editor.com> you will find many of the concepts the same. We re-use the same key names and layout choices wherever possible, but unlike keyboard-layout-editor each key is stateless, inheriting no properties from the keys that came before it.
+
+All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
+
+* `x`
+  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
+* `y`
+  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
+* `w`
+  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+* `h`
+  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+* `r`
+  * How many degrees clockwise to rotate the key.
+* `rx`
+  * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x`
+* `ry`
+  * The absolute position of the point to rotate the key around in the vertical axis. Default: `y`
+* `ks`
+  * Key Shape: define a polygon by providing a list of points, in Key Units.
+  * **Important**: These are relative to the top-left of the key, not absolute.
+  * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]`
+* `label`
+  * What to name this position in the matrix.
+  * This should usually be the same name as what is silkscreened on the PCB at this location.
+
+## How is the Metadata Exposed?
+
+This metadata is primarily used in two ways:
+
+* To allow web-based configurators to dynamically generate UI
+* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter.
+
+Configurator authors can see the [QMK Compiler](https://docs.api.qmk.fm/using-the-api) docs for more information on using the JSON API.

drivers/arm/i2c_master.c

@@ -46,13 +46,13 @@ __attribute__ ((weak))
 void i2c_init(void)
 {
   // Try releasing special pins for a short time
-  palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT);
 
   chThdSleepMilliseconds(10);
- 
-  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
-  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+
+  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }

drivers/arm/i2c_master.h

@@ -26,6 +26,16 @@
 #include "ch.h"
 #include <hal.h>
 
+#ifndef I2C1_BANK
+    #define I2C1_BANK GPIOB
+#endif
+#ifndef I2C1_SCL
+    #define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+    #define I2C1_SDA 7
+#endif
+
 #ifndef I2C_DRIVER
   #define I2C_DRIVER I2CD1
 #endif

drivers/issi/is31fl3731-simple.c

@@ -0,0 +1,246 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "is31fl3731-simple.h"
+#include "i2c_master.h"
+#include "progmem.h"
+#include "print.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define ISSI_ADDR_DEFAULT 0x74
+
+#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00
+#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
+#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+
+#define ISSI_CONF_PICTUREMODE 0x00
+#define ISSI_CONF_AUTOFRAMEMODE 0x04
+#define ISSI_CONF_AUDIOMODE 0x08
+
+#define ISSI_REG_PICTUREFRAME  0x01
+
+#define ISSI_REG_SHUTDOWN 0x0A
+#define ISSI_REG_AUDIOSYNC 0x06
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[LED_DRIVER_COUNT][144];
+bool g_pwm_buffer_update_required = false;
+
+/* There's probably a better way to init this... */
+#if LED_DRIVER_COUNT == 1
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
+#elif LED_DRIVER_COUNT == 2
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
+#elif LED_DRIVER_COUNT == 3
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
+#elif LED_DRIVER_COUNT == 4
+    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
+#endif
+bool g_led_control_registers_update_required = false;
+
+// This is the bit pattern in the LED control registers
+// (for matrix A, add one to register for matrix B)
+//
+//  reg -  b7  b6  b5  b4  b3  b2  b1  b0
+// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
+// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
+// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
+// 0x06 -  - , - , - , - , - ,B02,B01,B00
+// 0x08 -  - , - , - , - , - , - , - , -
+// 0x0A - B17,B16,B15, - , - , - , - , -
+// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
+// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
+// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
+
+
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+    #if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+              break;
+            }
+        }
+    #else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+    #endif
+}
+
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
+    // assumes bank is already selected
+
+    // transmit PWM registers in 9 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for (int i = 0; i < 144; i += 16) {
+        // set the first register, e.g. 0x24, 0x34, 0x44, etc.
+        g_twi_transfer_buffer[0] = 0x24 + i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
+        for (int j = 0; j < 16; j++) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3731_init(uint8_t addr) {
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, first enable software shutdown,
+    // then set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // select "function register" bank
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+
+    // enable software shutdown
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
+    // this delay was copied from other drivers, might not be needed
+    wait_ms(10);
+
+    // picture mode
+    IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+    // display frame 0
+    IS31FL3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
+    // audio sync off
+    IS31FL3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
+
+    // select bank 0
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+
+    // turn off all LEDs in the LED control register
+    for (int i = 0x00; i <= 0x11; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // turn off all LEDs in the blink control register (not really needed)
+    for (int i = 0x12; i <= 0x23; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // set PWM on all LEDs to 0
+    for (int i = 0x24; i <= 0xB3; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
+    }
+
+    // select "function register" bank
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+
+    // disable software shutdown
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
+
+    // select bank 0 and leave it selected.
+    // most usage after initialization is just writing PWM buffers in bank 0
+    // as there's not much point in double-buffering
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+
+}
+
+void IS31FL3731_set_value(int index, uint8_t value) {
+    if (index >= 0 && index < LED_DRIVER_LED_COUNT) {
+        is31_led led = g_is31_leds[index];
+
+        // Subtract 0x24 to get the second index of g_pwm_buffer
+        g_pwm_buffer[led.driver][led.v - 0x24] = value;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3731_set_value_all(uint8_t value) {
+    for (int i = 0; i < LED_DRIVER_LED_COUNT; i++) {
+        IS31FL3731_set_value(i, value);
+    }
+}
+
+void IS31FL3731_set_led_control_register(uint8_t index, bool value) {
+  is31_led led = g_is31_leds[index];
+
+  uint8_t control_register = (led.v - 0x24) / 8;
+  uint8_t bit_value = (led.v - 0x24) % 8;
+
+    if (value) {
+        g_led_control_registers[led.driver][control_register] |= (1 << bit_value);
+    } else {
+        g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value);
+    }
+
+    g_led_control_registers_update_required = true;
+}
+
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required) {
+        IS31FL3731_write_pwm_buffer(addr, g_pwm_buffer[index]);
+        g_pwm_buffer_update_required = false;
+    }
+}
+
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_led_control_registers_update_required) {
+        for (int i=0; i<18; i++) {
+            IS31FL3731_write_register(addr, i, g_led_control_registers[index][i]);
+        }
+    }
+}

drivers/issi/is31fl3731-simple.h

@@ -0,0 +1,210 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3731_DRIVER_H
+#define IS31FL3731_DRIVER_H
+
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t v;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[LED_DRIVER_LED_COUNT];
+
+void IS31FL3731_init(uint8_t addr);
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3731_set_value(int index, uint8_t value);
+void IS31FL3731_set_value_all(uint8_t value);
+
+void IS31FL3731_set_led_control_register(uint8_t index, bool value);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define C1_1  0x24
+#define C1_2  0x25
+#define C1_3  0x26
+#define C1_4  0x27
+#define C1_5  0x28
+#define C1_6  0x29
+#define C1_7  0x2A
+#define C1_8  0x2B
+
+#define C1_9  0x2C
+#define C1_10 0x2D
+#define C1_11 0x2E
+#define C1_12 0x2F
+#define C1_13 0x30
+#define C1_14 0x31
+#define C1_15 0x32
+#define C1_16 0x33
+
+#define C2_1  0x34
+#define C2_2  0x35
+#define C2_3  0x36
+#define C2_4  0x37
+#define C2_5  0x38
+#define C2_6  0x39
+#define C2_7  0x3A
+#define C2_8  0x3B
+
+#define C2_9  0x3C
+#define C2_10 0x3D
+#define C2_11 0x3E
+#define C2_12 0x3F
+#define C2_13 0x40
+#define C2_14 0x41
+#define C2_15 0x42
+#define C2_16 0x43
+
+#define C3_1  0x44
+#define C3_2  0x45
+#define C3_3  0x46
+#define C3_4  0x47
+#define C3_5  0x48
+#define C3_6  0x49
+#define C3_7  0x4A
+#define C3_8  0x4B
+
+#define C3_9  0x4C
+#define C3_10 0x4D
+#define C3_11 0x4E
+#define C3_12 0x4F
+#define C3_13 0x50
+#define C3_14 0x51
+#define C3_15 0x52
+#define C3_16 0x53
+
+#define C4_1  0x54
+#define C4_2  0x55
+#define C4_3  0x56
+#define C4_4  0x57
+#define C4_5  0x58
+#define C4_6  0x59
+#define C4_7  0x5A
+#define C4_8  0x5B
+
+#define C4_9  0x5C
+#define C4_10 0x5D
+#define C4_11 0x5E
+#define C4_12 0x5F
+#define C4_13 0x60
+#define C4_14 0x61
+#define C4_15 0x62
+#define C4_16 0x63
+
+#define C5_1  0x64
+#define C5_2  0x65
+#define C5_3  0x66
+#define C5_4  0x67
+#define C5_5  0x68
+#define C5_6  0x69
+#define C5_7  0x6A
+#define C5_8  0x6B
+
+#define C5_9  0x6C
+#define C5_10 0x6D
+#define C5_11 0x6E
+#define C5_12 0x6F
+#define C5_13 0x70
+#define C5_14 0x71
+#define C5_15 0x72
+#define C5_16 0x73
+
+#define C6_1  0x74
+#define C6_2  0x75
+#define C6_3  0x76
+#define C6_4  0x77
+#define C6_5  0x78
+#define C6_6  0x79
+#define C6_7  0x7A
+#define C6_8  0x7B
+
+#define C6_9  0x7C
+#define C6_10 0x7D
+#define C6_11 0x7E
+#define C6_12 0x7F
+#define C6_13 0x80
+#define C6_14 0x81
+#define C6_15 0x82
+#define C6_16 0x83
+
+#define C7_1  0x84
+#define C7_2  0x85
+#define C7_3  0x86
+#define C7_4  0x87
+#define C7_5  0x88
+#define C7_6  0x89
+#define C7_7  0x8A
+#define C7_8  0x8B
+
+#define C7_9  0x8C
+#define C7_10 0x8D
+#define C7_11 0x8E
+#define C7_12 0x8F
+#define C7_13 0x90
+#define C7_14 0x91
+#define C7_15 0x92
+#define C7_16 0x93
+
+#define C8_1  0x94
+#define C8_2  0x95
+#define C8_3  0x96
+#define C8_4  0x97
+#define C8_5  0x98
+#define C8_6  0x99
+#define C8_7  0x9A
+#define C8_8  0x9B
+
+#define C8_9  0x9C
+#define C8_10 0x9D
+#define C8_11 0x9E
+#define C8_12 0x9F
+#define C8_13 0xA0
+#define C8_14 0xA1
+#define C8_15 0xA2
+#define C8_16 0xA3
+
+#define C9_1  0xA4
+#define C9_2  0xA5
+#define C9_3  0xA6
+#define C9_4  0xA7
+#define C9_5  0xA8
+#define C9_6  0xA9
+#define C9_7  0xAA
+#define C9_8  0xAB
+
+#define C9_9  0xAC
+#define C9_10 0xAD
+#define C9_11 0xAE
+#define C9_12 0xAF
+#define C9_13 0xB0
+#define C9_14 0xB1
+#define C9_15 0xB2
+#define C9_16 0xB3
+
+
+#endif // IS31FL3731_DRIVER_H

keyboards/1upkeyboards/1up60hte/readme.md

@@ -1,10 +1,15 @@
-# 1up60hte (Hot Swap Edition - Tsangan)
+
+# 1up60hte (Hot Swap Tsangan Edition)
+
+![1up60hte](https://www.1upkeyboards.com/wp-content/uploads/2019/01/PCB-60-HS-TSA-both.jpg)
+
 
 A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a Tsangan layout.
 
 Keyboard Maintainer: [Bubnick](https://github.com/bubnick)  
 Hardware Supported: 1up60hte 60% PCB  
-Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/)
+
+Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/bdn9/config.h

@@ -50,7 +50,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
-  #define RGBLED_NUM 3
+  #define RGBLED_NUM 4
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8

keyboards/bdn9/keymaps/default/keymap.c

@@ -17,25 +17,30 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(
-        KC_A,    KC_B,    KC_C, \
-        BL_STEP, KC_UP,   RGB_MOD, \
+        KC_MUTE, KC_HOME,   KC_MPLY, \
+        MO(1),   KC_UP,   RGB_MOD, \
         KC_LEFT, KC_DOWN, KC_RGHT \
     ),
+    [1] = LAYOUT(
+        RESET,   BL_STEP, KC_STOP, \
+        _______, KC_HOME, RGB_MOD, \
+        KC_MPRV, KC_END,  KC_MNXT \
+    ),
 };
 
 void encoder_update_user(uint8_t index, bool clockwise) {
     if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+    else if (index == 1) {
         if (clockwise) {
             tap_code(KC_PGDN);
         } else {
             tap_code(KC_PGUP);
         }
     }
-    else if (index == 1) {
-        if (clockwise) {
-            tap_code(KC_DOWN);
-        } else {
-            tap_code(KC_UP);
-        }
-    }
 }

keyboards/ergodash/readme.md

@@ -22,4 +22,10 @@ Note:
 
 # Layout
 ![layout](https://github.com/omkbd/picture/blob/master/ergodash-layout.png)
+
+Layout Note:  
+- In thumb cluster, it is not possible to use all 5 positions as small keys. (as pictured)
+- The top 2 1u keys in the thumb cluster share the same connection.
+- 2u key (center) position shares with the lower 1u key position
+
 ![PCB](https://github.com/omkbd/picture/blob/master/Ergodash_PCB.jpg)

keyboards/ergotravel/keymaps/default/config.h

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 12
+#define RGBLED_NUM 14
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8

keyboards/ergotravel/keymaps/default/keymap.c

@@ -16,56 +16,45 @@ enum custom_keycodes {
 
 // #define KC_ KC_TRNS
 #define _______ KC_TRNS
-
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_QWERTY] = LAYOUT(
   //,--------+--------+--------+--------+--------+--------+--------.        ,--------+--------+--------+--------+--------+--------+--------.
-     KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC,          KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+     KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,          KC_EQL, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
   //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_A,             KC_A,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+     KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_LBRC,          KC_RBRC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
   //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_A,             KC_SPC,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_SPC,           KC_SPC,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
   //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
      KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC,           KC_SPC,  RAISE,            KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT
   //`--------+--------+--------+--------+--------+--------+--------/        \--------+--------+--------+--------+--------+--------+--------'
   ),
 
   [_LOWER] = LAYOUT(
-  //,--------+--------+--------+--------+--------+--------+--------.        ,--------+--------+--------+--------+--------+--------+--------.
-     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_A,             KC_B,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
-  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_TAB,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,            KC_D,    KC_Y,    KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_LSFT, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_SPC,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC,           KC_SPC,  RAISE,            KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT
-  //`--------+--------+--------+--------+--------+--------+--------/        \--------+--------+--------+--------+--------+--------+--------'
+  KC_TILD, KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_HOME,          KC_PGUP,     KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
+  _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_END ,          KC_PGDN,     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_BSLS, \
+  _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_BSPC,          KC_BSPC,     KC_F12,  _______, _______, KC_MUTE, _______, KC_PIPE, \
+  _______, _______,  _______, _______, _______, KC_BSPC,                                KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+
   ),
 
   [_RAISE] = LAYOUT(
-  //,--------+--------+--------+--------+--------+--------+--------.        ,--------+--------+--------+--------+--------+--------+--------.
-     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_A,             KC_B,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_C,             KC_D,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
-  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_A,             KC_SPC,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC,           KC_SPC,  RAISE,            KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT
-  //`--------+--------+--------+--------+--------+--------+--------/        \--------+--------+--------+--------+--------+--------+--------'
+ 
+  KC_ESC,  KC_1,    KC_2,  KC_3,   KC_4,    KC_5,     _______,          _______,     KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
+  _______, KC_4,    KC_5,  KC_6,   KC_PLUS, _______,  _______,          _______,   _______,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______, \
+  KC_ENT,  KC_7,    KC_8,  KC_9,   KC_MINS, _______,  _______,          _______,   _______,   KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, \
+  _______, KC_COMM, KC_0,  KC_DOT, _______, KC_BSPC,                                 KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+  
   ),
 
   [_ADJUST] = LAYOUT(
-  //,--------+--------+--------+--------+--------+--------+--------.        ,--------+--------+--------+--------+--------+--------+--------.
-     KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,            KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC,
-  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_C,             KC_D,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
-  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_A,             KC_SPC,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC,           KC_SPC,  RAISE,            KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT
-  //`--------+--------+--------+--------+--------+--------+--------/        \--------+--------+--------+--------+--------+--------+--------'
+     TSKMGR,  _______,  _______, _______, _______, _______, _______,         _______,  _______, RGB_MOD, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL,
+     _______, _______,  _______, _______, _______, _______, _______,         _______,  _______, RGB_RMOD, RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG,
+     _______, _______,  _______, _______, _______, _______, _______,         _______,  _______, _______, _______, _______, _______, BL_STEP,
+     _______, _______, _______, _______,           _______, _______,         _______,  _______,          _______, _______, _______, RESET
   )
 
 };

keyboards/exclusive/e6_rgb/readme.md

@@ -7,6 +7,6 @@ Hardware Supported: E6V1, E6V2
 
 Make example for this keyboard (after setting up your build environment):
 
-    make e6_rgb:60_ansi
+    make exclusive/e6_rgb:60_ansi
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/exclusive/e6v2/le/readme.md

@@ -10,10 +10,10 @@ Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.o
 
 Make example for this keyboard (after setting up your build environment):
 
-    make e6v2/le:default
+    make exclusive/e6v2/le:default
 
 Or to make and flash:
 
-    make e6v2/le:default:dfu
+    make exclusive/e6v2/le:default:dfu
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/exclusive/e7v1/readme.md

@@ -10,6 +10,6 @@ Hardware Availability: [https://geekhack.org/index.php?topic=97182.msg2654226#ms
 
 Make example for this keyboard (after setting up your build environment):
 
-    make e7v1:default
+    make exclusive/e7v1:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/exclusive/readme.md

@@ -0,0 +1,9 @@
+# Exclusive Firmware
+
+All files related to firmware of keyboards designed by Exclusive.
+
+## Keyboards
+
+* [e6_rgb](./e6_rgb/): maintainer [astro](https://github.com/yulei)
+* [e6-v2](./e6v2/): maintainers [MechMerlin](https://github.com/mechmerlin), [amnesia0287](https://github.com/amnesia0287)
+* [e7-v1](./e7v1): maintainer [masterzen](https://github.com/masterzen)

keyboards/hhkb/keymaps/bakingpy/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_JP(
+        KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
+        KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_BSLS,
+        MO(1), KC_GRV, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_BSPC, KC_RGUI, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT),
+
+    [1] = LAYOUT_JP(
+        KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
+        KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______,
+        _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT,
+        _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, _______, _______)};

keyboards/hhkb/keymaps/bakingpy/rules.mk

@@ -0,0 +1 @@
+OPT_DEFS += -DHHKB_JP

keyboards/laptreus/config.h

@@ -0,0 +1,72 @@
+/*
+Copyright 2019 Chuck "@vosechu" Lauer Vose <vosechu@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0x1209 // pid.codes Vendor ID
+#define PRODUCT_ID      0xA1F1 // FIXME: Need to send PR to pid.codes to make this official
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Vosechu
+#define PRODUCT         Laptreus
+#define DESCRIPTION     keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 10
+
+#define MATRIX_ROW_PINS { F7, F6, F5, F1, F4 }
+#define MATRIX_COL_PINS { D6, B7, B6, D7, C6, D1, D0, D3, D2, F0 }
+#define UNUSED_PINS     { }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+// #define NO_ACTION_LAYER
+// #define NO_ACTION_TAPPING
+// #define NO_ACTION_ONESHOT
+// #define NO_ACTION_MACRO
+// #define NO_ACTION_FUNCTION

keyboards/laptreus/keymaps/debug/keymap.c

@@ -0,0 +1,11 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* ============================= DEBUG LAYER ============================= */
+  [0] = LAYOUT(
+    KC_A, KC_1, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,
+    KC_A, KC_2, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,
+    KC_A, KC_3, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,
+    KC_A, KC_4, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L
+  )
+};

keyboards/laptreus/keymaps/debug/readme.md

@@ -0,0 +1,81 @@
+# Debug layout
+
+This layout is expressly for debugging to see if your keys are working.
+
+## Flashing
+
+**NOTE**: Make sure you don't have a second QMK keyboard plugged in when you do this!
+
+To compile and flash to the board:
+
+    make laptreus:debug:avrdude
+
+To just compile:
+
+    make laptreus:debug
+
+Then use QMK toolbox to write the file
+
+# Testing
+
+Now that you've got the image flashed, do the following:
+
+* Open a new text document
+* Click each key in order and hit enter (with the other keyboard) between each line
+* For any keys that don't register, hit space (with the other keyboard) and continue on
+* You'll end up with something looking like this:
+
+    a1bcdefghijkl
+    a2bcdefghijkl
+    a3bcdefghijkl
+    a4bcdefghijkl
+
+But almost certainly it won't be perfect, so lets go through some scenarios:
+
+## Step 1: Get all the letters to output _something_
+
+For lines that look like this:
+
+    a1bc efg ijkl
+
+* Option 1: Bent pin - Pull out the switch in those spots, probably the pin got bent when you inserted it into the hotswap socket. Gently bend the pin straight and re-insert.
+* Option 2: Broken joint on hotswap - If the pin looks okay, try connecting the two metal plated holes underneath the hotswap holes to see if the letter comes out. If it does, reflow (aka, apply some flux to both pads and reheat) the solder joint.
+* Option 3: Diode is backwards - If connecting the two metal pins didn't work, double check that the diode is the right direction. This may also need to be reflowed.
+* Option 4: ??? - Hop in [the discord]() and let's chat!
+
+## Step 2: Correct double letters
+
+Once you have all the keys outputting _anything_, flash the default layout and do the same thing. If everything is working, your layout will look something like this:
+
+    qwertyuiop
+    asdfghjkl;'
+    zxcvbnm,./
+
+**Note**: Don't worry about hitting the backspace or command keys
+
+### Duplicate letters
+
+For lines that look like this:
+
+    qwertyyuiop (double y)
+
+* Option 1: Bent pin - Pull out the switch in those spots, probably the pin got bent when you inserted it into the hotswap socket. Gently bend the pin straight and re-insert.
+* Option 2: Switch is broken - Try connecting the two metal plated holes underneath the hotswap holes to see if the letter comes out just once. If it does, the switch is broken and should be replaced. If you don't have another switch, you _may_ be able to unbend the leaf inside the switch, but it's really tricky.
+
+### Second letter sent (same row)
+
+For lines that look like this:
+
+    qwertyyuiop (t sent t AND y)
+
+* Option 1: ??? - I can't imagine how this would happen with this layout, but let me know if it does!
+
+### Second letter sent (same column)
+
+For lines that look like this:
+
+    qwertgyuiop (t sent t AND g)
+    qwertgbyuiop (t sent t AND g AND b)
+
+* Option 1: Diodes are backwards - Some of the diodes on this column are backwards, you can use a diode tester to confirm the direction, or just check them with a magnifying glass and switch them if needed.
+* Option 2: ???

keyboards/laptreus/keymaps/default/keymap.c

@@ -0,0 +1,74 @@
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+  _QWERTY = 0,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _LIFT
+};
+
+// Fillers to make layering more clear
+#define _LAYER_ KC_TRNS
+
+// Adding macros to make the keymaps below much easier to read.
+#define CTL_ESC CTL_T(KC_ESC)
+#define CTL_GRV CTL_T(KC_GRV)
+#define ALT_TAB ALT_T(KC_TAB)
+#define SFT_SPC SFT_T(KC_SPC)
+
+// Extended alpha key layers
+#define RSE_J  LT(_RAISE, KC_J)
+#define LWR_F  LT(_LOWER, KC_F)
+#define RSE_H  LT(_RAISE, KC_H)
+#define LWR_U  LT(_LOWER, KC_U)
+#define LFT_BK  LT(_LIFT, KC_BSPC)
+#define LFT_ENT LT(_LIFT, KC_ENT)
+
+// Macro keys for some apps
+#define SLACKUP LALT(LSFT(KC_UP))
+#define SLACKDN LALT(LSFT(KC_DOWN))
+#define TAB_LFT LGUI(LSFT(KC_LBRC))
+#define TAB_RGT LGUI(LSFT(KC_RBRC))
+#define BWSR_BK LGUI(KC_LBRC)
+#define BWSR_FW LGUI(KC_RBRC)
+#define SCR_LFT HYPR(KC_LEFT)
+#define SCR_RGT HYPR(KC_RGHT)
+#define SCR_FUL HYPR(KC_F)
+
+// Layer toggles
+#define TO_QW TO(_QWERTY)
+#define TO_DV TO(_DVORAK)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+    KC_TAB  , KC_Q    , KC_W    , KC_E    , KC_R    , KC_T    , KC_Y    , KC_U    , KC_I    , KC_O    , KC_P    , KC_BSPC ,
+    KC_ESC  , KC_A    , KC_S    , KC_D    , LWR_F   , KC_G    , KC_H    , RSE_J   , KC_K    , KC_L    , KC_SCLN , KC_QUOT ,
+    KC_LSFT , KC_Z    , KC_X    , KC_C    , KC_V    , KC_B    , KC_N    , KC_M    , KC_COMM , KC_DOT  , KC_SLSH , KC_ENT  ,
+    KC_HYPR , CTL_GRV , ALT_TAB , KC_LGUI , LFT_BK  , SFT_SPC , KC_SPC  , LFT_ENT , KC_LEFT , KC_DOWN , KC_UP   , KC_RGHT
+  ),
+  [_DVORAK] = LAYOUT(
+    KC_TAB  , KC_QUOT , KC_COMM , KC_DOT  , KC_P    , KC_Y    , KC_F    , KC_G    , KC_C    , KC_R    , KC_L    , KC_BSPC ,
+    KC_ESC  , KC_A    , KC_O    , KC_E    , LWR_U   , KC_I    , KC_D    , RSE_H   , KC_T    , KC_N    , KC_S    , KC_SLSH ,
+    KC_LSFT , KC_SCLN , KC_Q    , KC_J    , KC_K    , KC_X    , KC_B    , KC_M    , KC_W    , KC_V    , KC_Z    , KC_ENT  ,
+    KC_HYPR , CTL_GRV , ALT_TAB , KC_LGUI , LFT_BK  , SFT_SPC , KC_SPC  , LFT_ENT , KC_LEFT , KC_DOWN , KC_UP   , KC_RGHT
+  ),
+  [_LOWER] = LAYOUT(
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , KC_7    , KC_8    , KC_9    , XXXXXXX , _______ ,
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , _LAYER_ , XXXXXXX , XXXXXXX , KC_4    , KC_5    , KC_6    , XXXXXXX , _______ ,
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , KC_1    , KC_2    , KC_3    , XXXXXXX , _______ ,
+    _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , KC_0    , KC_DOT  , _______ , _______
+  ),
+  [_RAISE] = LAYOUT(
+    _______ , KC_LABK , KC_RABK , KC_LCBR , KC_RCBR , KC_EQL  , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , _______ ,
+    _______ , KC_LPRN , KC_RPRN , KC_LBRC , KC_RBRC , KC_MINS , XXXXXXX , _LAYER_ , XXXXXXX , XXXXXXX , XXXXXXX , _______ ,
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , KC_BSLS , KC_SLSH , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , _______ ,
+    _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______
+  ),
+  [_LIFT] = LAYOUT(
+    _______ , BWSR_BK , TAB_LFT , KC_UP   , TAB_RGT , BWSR_FW , KC_MUTE , XXXXXXX , SCR_LFT , SCR_FUL , SCR_RGT , _______ ,
+    _______ , XXXXXXX , KC_LEFT , KC_DOWN , KC_RGHT , KC_PGUP , KC_VOLU , SLACKUP , XXXXXXX , XXXXXXX , TO_QW   , _______ ,
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , KC_PGDN , KC_VOLD , SLACKDN , XXXXXXX , XXXXXXX , TO_DV   , _______ ,
+    _______ , RESET   , _______ , _______ , _LAYER_ , KC_BSPC , _______ , KC_LSFT , KC_LGUI , KC_LALT , KC_LCTL , _______
+  )
+};

keyboards/laptreus/keymaps/default/readme.md

@@ -0,0 +1,79 @@
+# Default layout
+
+This is the default layout for the Laptreus
+
+## Layout
+
+Some special things:
+
+* Lower/Raise are on the F/J keys. Tap to type the character, hold to activate the layer
+* Enter and Backspace also activate the Lift layer.
+* -- To get repeated backspace, hold BkLft and then press Shift
+
+### Qwerty
+
+    ,-----------------------------------------------------------------------------------.
+    |  Tab |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+    |------+------+------+------+------+-------------+------+------+------+------+------|
+    |  Esc |   A  |   S  |   D  | Lwr/F|   G  |   H  | Rse/J|   K  |   L  |   ;  |   "  |
+    |------+------+------+------+------+------|------+------+------+------+------+------|
+    | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Enter|
+    |------+------+------+------+------+------+------+------+------+------+------+------|
+    | Hyper|Ctrl/~|AltTab|  Cmd | BkLft| Shift| Space|EntLft| Left | Down |  Up  | Right|
+    `-----------------------------------------------------------------------------------'
+
+### Dvorak
+
+    ,-----------------------------------------------------------------------------------.
+    |  Tab |   '  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+    |------+------+------+------+------+-------------+------+------+------+------+------|
+    |  Esc |   A  |   O  |   E  | Lwr/U|   I  |   D  | Rse/H|   T  |   N  |   S  |   /  |
+    |------+------+------+------+------+------|------+------+------+------+------+------|
+    | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  | Enter|
+    |------+------+------+------+------+------+------+------+------+------+------+------|
+    | Hyper|Ctrl/~|AltTab|  Cmd | BkLft| Shift| Space|EntLft| Left | Down |  Up  | Right|
+    `-----------------------------------------------------------------------------------'
+
+### Raise
+
+    ,-----------------------------------------------------------------------------------.
+    |      |  <   |  >   |  {   |  }   |      |      |      |      |      |      |      |
+    |------+------+------+------+------+-------------+------+------+------+------+------|
+    |      |  (   |  )   |  [   |  ]   |      |      |      |      |      |      |      |
+    |------+------+------+------+------+------|------+------+------+------+------+------|
+    |      |      |      |      |      |      |      |      |      |      |      |      |
+    |------+------+------+------+------+------+------+------+------+------+------+------|
+    |      |      |      |      | BkLft| Shift| Space|EntLft|      |      |      |      |
+    `-----------------------------------------------------------------------------------'
+
+### Lower
+
+    ,-----------------------------------------------------------------------------------.
+    |      |      |      |      |      |      |      |   7  |   8  |   9  |      |      |
+    |------+------+------+------+------+-------------+------+------+------+------+------|
+    |      |      |      |      |      |      |      |   4  |   5  |   6  |      |      |
+    |------+------+------+------+------+------|------+------+------+------+------+------|
+    |      |      |      |      |      |      |      |   1  |   2  |   3  |      |      |
+    |------+------+------+------+------+------+------+------+------+------+------+------|
+    |      |      |      |      | BkLft| Shift| Space|   0  |   0  |   .  |      |      |
+    `-----------------------------------------------------------------------------------'
+
+### Lift
+
+    ,-----------------------------------------------------------------------------------.
+    |      |Hist ←| Tab ←|  ↑   | Tab →|Hist →| Mute |      |ScrLft|ScrFul|ScrRgt|      |
+    |------+------+------+------+------+-------------+------+------+------+------+------|
+    |      |      |  ←   |  ↓   |  →   | Pg Up|Vol up|Slk up|      |      |Qwerty|      |
+    |------+------+------+------+------+------|------+------+------+------+------+------|
+    |      |      |      |      |      | Pg Dn|Vol dn|Slk dn|      |      |Dvorak|      |
+    |------+------+------+------+------+------+------+------+------+------+------+------|
+    |      | Reset|      |      |      | Bksp |      | Shift|  Cmd |  Opt | Ctrl |      |
+    `-----------------------------------------------------------------------------------'
+
+Special things:
+
+* Hist: Back button in your browser
+* Tab: Move one tab left/right in most mac apps
+* Slk: Go to the previous/next unread conversation in Slack
+* Scr: Make this app fill the left/right side of your monitor (or full screen)
+* Since arrows are on this layer, the command keys are moved to the right side

keyboards/laptreus/keymaps/vosechu/keymap.c

@@ -0,0 +1,36 @@
+#include QMK_KEYBOARD_H
+
+#include "vosechu.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [DV] = LAYOUT(
+    PAWFIVE , KC_QUOT , KC_COMM , KC_DOT  , KC_P    , KC_Y    , KC_F    , KC_G    , KC_C    , KC_R    , KC_L    , RESET   ,
+    KC_ESC  , KC_A    , KC_O    , KC_E    , LWR_U   , KC_I    , KC_D    , RSE_H   , KC_T    , KC_N    , KC_S    , XXXXXXX ,
+    XXXXXXX , KC_SCLN , KC_Q    , KC_J    , KC_K    , KC_X    , KC_B    , KC_M    , KC_W    , KC_V    , KC_Z    , KC_ENT  ,
+    XXXXXXX , CTL_GRV , ALT_TAB , KC_LGUI , LFT_BK  , SFT_SPC , KC_SPC  , LFT_ENT , KC_MINS , KC_EQL  , KC_SLSH , KC_BSLS
+  ),
+  [QW] = LAYOUT(
+    KC_TAB  , KC_Q    , KC_W    , KC_E    , KC_R    , KC_T    , KC_Y    , KC_U    , KC_I    , KC_O    , KC_P    , KC_BSPC ,
+    KC_ESC  , KC_A    , KC_S    , KC_D    , LWR_F   , KC_G    , KC_H    , RSE_J   , KC_K    , KC_L    , KC_SCLN , KC_QUOT ,
+    KC_LSFT , KC_Z    , KC_X    , KC_C    , KC_V    , KC_B    , KC_N    , KC_M    , KC_COMM , KC_DOT  , KC_SLSH , KC_ENT  ,
+    KC_HYPR , CTL_GRV , ALT_TAB , KC_LGUI , LFT_BK  , SFT_SPC , KC_SPC  , LFT_ENT , KC_LEFT , KC_DOWN , KC_UP   , KC_RGHT
+  ),
+  [LWR] = LAYOUT(
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , KC_7    , KC_8    , KC_9    , XXXXXXX , _______ ,
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , _LAYER_ , XXXXXXX , XXXXXXX , KC_4    , KC_5    , KC_6    , XXXXXXX , _______ ,
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , KC_1    , KC_2    , KC_3    , XXXXXXX , _______ ,
+    _______ , _______ , _______ , _______ , _______ , _______ , _______ , KC_0    , KC_0    , KC_DOT  , _______ , _______
+  ),
+  [RSE] = LAYOUT(
+    _______ , KC_LABK , KC_RABK , KC_LCBR , KC_RCBR , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , _______ ,
+    _______ , KC_LPRN , KC_RPRN , KC_LBRC , KC_RBRC , XXXXXXX , XXXXXXX , _LAYER_ , XXXXXXX , XXXXXXX , XXXXXXX , _______ ,
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , _______ ,
+    _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______
+  ),
+  [LFT] = LAYOUT(
+    _______ , BWSR_BK , TAB_LFT , KC_UP   , TAB_RGT , BWSR_FW , KC_MUTE , XXXXXXX , SCR_LFT , SCR_FUL , SCR_RGT , _______ ,
+    _______ , XXXXXXX , KC_LEFT , KC_DOWN , KC_RGHT , KC_PGUP , KC_VOLU , SLACKUP , XXXXXXX , XXXXXXX , TO(QW)  , _______ ,
+    _______ , XXXXXXX , XXXXXXX , XXXXXXX , XXXXXXX , KC_PGDN , KC_VOLD , SLACKDN , XXXXXXX , XXXXXXX , TO(DV)  , _______ ,
+    _______ , RESET   , _______ , _______ , _LAYER_ , KC_BSPC , _______ , KC_LSFT , KC_LGUI , KC_LALT , KC_LCTL , _______
+  )
+};

keyboards/laptreus/laptreus.c

@@ -0,0 +1,6 @@
+#include "laptreus.h"
+
+void matrix_init_kb() {
+  // auto detect output on init
+  set_output(OUTPUT_AUTO);
+}

keyboards/laptreus/laptreus.h

@@ -0,0 +1,41 @@
+#ifndef LAPTREUS_H
+#define LAPTREUS_H
+
+#include "quantum.h"
+#include "outputselect.h"
+
+/*
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+*/
+#define LAYOUT( \
+  A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A12, \
+  B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12, \
+  C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, \
+  D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 \
+) \
+{ \
+  {A2, A3, A4, A5, A6, A7, A8, A9, A10, A11}, \
+  {B2, B3, B4, B5, B6, B7, B8, B9, B10, B11}, \
+  {C2, C3, C4, C5, C6, C7, C8, C9, C10, C11}, \
+  {D2, D3, D4, D5, D6, D7, D8, D9, D10, D11}, \
+  {A1, B1, C1, D1, KC_NO, KC_NO, D12, C12, B12, A12} \
+}
+
+#define LAYOUT_kc( \
+  A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A12, \
+  B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12, \
+  C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, \
+  D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 \
+) \
+{ \
+  LAYOUT( \
+    KC_##A1, KC_##A2, KC_##A3, KC_##A4, KC_##A5, KC_##A6, KC_##A7, KC_##A8, KC_##A9, KC_##A10, KC_##A11, KC_##A12, \
+    KC_##B1, KC_##B2, KC_##B3, KC_##B4, KC_##B5, KC_##B6, KC_##B7, KC_##B8, KC_##B9, KC_##B10, KC_##B11, KC_##B12, \
+    KC_##C1, KC_##C2, KC_##C3, KC_##C4, KC_##C5, KC_##C6, KC_##C7, KC_##C8, KC_##C9, KC_##C10, KC_##C11, KC_##C12, \
+    KC_##D1, KC_##D2, KC_##D3, KC_##D4, KC_##D5, KC_##D6, KC_##D7, KC_##D8, KC_##D9, KC_##D10, KC_##D11, KC_##D12 \
+  ) \
+}
+
+#endif

keyboards/laptreus/readme.md

@@ -0,0 +1,35 @@
+# Laptreus
+
+TODO: Insert cool photo
+
+Laptreus is a 40% bluetooth keyboard in the style of the Atreus, which is specifically designed to sit atop your laptop keyboard.
+
+Maintainer: [Chuck Lauer Vose](https://github.com/vosechu)
+MCU: Adafruit Feather 32u4 BLE
+Purchase link: GB coming soon
+Case link: GB coming soon
+Case design files: TODO
+
+## Flashing
+
+**NOTE**: Make sure you don't have a second QMK keyboard plugged in when you do this!
+
+[Default layout documentation](https://github.com/qmk/qmk_firmware/tree/master/keyboards/laptreus/keymaps/default)
+
+To compile and flash to the board:
+
+    make laptreus:default:avrdude
+
+To just compile:
+
+    make laptreus:default
+
+Then use QMK toolbox to write the file
+
+## Changelog
+
+v1.2: Mostly working, but JST connector is a little too tight and the reset switch is not connected.
+
+## Build log
+
+TODO

keyboards/laptreus/rules.mk

@@ -0,0 +1,67 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 8000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = catarina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+#BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+#MIDI_ENABLE = no           # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+KEY_LOCK_ENABLE = no
+TAP_DANCE_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+BLUETOOTH_ENABLE = no       # Legacy bluetooth support
+BLUETOOTH = AdafruitBLE

keyboards/lazydesigners/the50/keymaps/mikethetiger/keymap.c

@@ -0,0 +1,79 @@
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+  _QWERTY,
+  _L1,
+  _L2
+};
+
+// Act as Shift on hold and as CapsLock on tap
+#define SFT_CPS LSFT_T(KC_CAPS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ *  ,-----------------------------------------------------------. ,--------------.
+ *  |Esc | Q  | W  | E  | R  | T  | Y  | U  | I  | O  | P  |Bspc| | 7  | 8  | 9  |
+ *  |-----------------------------------------------------------| |--------------|
+ *  | Tab  | A  | S  | D  | F  | G  | H  | J  | K  | L  | Enter | | 4  | 5  | 6  |
+ *  |-----------------------------------------------------------| |--------------|
+ *  | Shift  | Z  | X  | C  | V  | B  | N  | M  | ,  | .  |  L2 | | 1  | 2  | 3  |
+ *  |-----------------------------------------------------------| |--------------|
+ *  | Ctrl |Gui | Alt  |  Space  |    Space   | RAlt |RCtrl| L1 | | 0  | .  |Entr|
+ *  `-----------------------------------------------------------' `--------------'
+ */
+
+[_QWERTY] = LAYOUT(
+KC_GESC, KC_Q,    KC_W,    KC_E,     KC_R,   KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,     KC_P7, KC_P8,   KC_P9,
+KC_TAB,  KC_A,    KC_S,    KC_D,     KC_F,   KC_G,    KC_H,    KC_J,    KC_K,    KC_L,        KC_ENT,           KC_P4, KC_P5,   KC_P6,
+SFT_CPS, KC_Z,    KC_X,    KC_C,     KC_V,   KC_B,    KC_N,    KC_M,             KC_COMM, KC_DOT,  MO(_L2),     KC_P1, KC_P2,   KC_P3,
+KC_LCTL, KC_LGUI, KC_LALT,       KC_SPC,            KC_SPC,                      KC_RALT, KC_RCTL, MO(_L1),     KC_0, KC_PDOT, KC_PENT
+),
+
+/* L1
+ *  ,-----------------------------------------------------------. ,--------------.
+ *  |  ~ | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 0  |Del | |NMLK|    | /  |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |      | F1 | F2 | F3 | F4 | F5 | F6 |    | [  | ]  |  \    | |  - |  = | *  |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |        | F7 | F8 | F9 |F10 |F11 |F12 | ,  | .  | /  |     | |    |    | -  |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |      |    |      |         |            |  ;   |  ' |     | |    |    | +  |
+ *  `-----------------------------------------------------------' `--------------'
+ */
+
+[_L1] = LAYOUT(
+KC_GRAVE,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,  KC_DEL,  KC_NUMLOCK, _______, KC_PSLS,
+_______,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6, _______, KC_LBRC, KC_RBRC,        KC_BSLASH,     KC_MINS,  KC_EQL, KC_PAST,
+_______,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, KC_COMM,          KC_DOT , KC_SLSH, _______,     _______, _______, KC_PMNS,
+_______, _______, _______,          _______,            _______,                 KC_SCLN, KC_QUOT, _______,     _______, _______, KC_PPLS
+),
+
+/* L2
+ *  ,-----------------------------------------------------------. ,--------------.
+ *  |RST |    |    |    |    |    |    |    |    |    |Ins |Del | |Home|PgUp|    |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |      |Prev|Play|Next|    |    |    |VolD|Mute|VolU|       | |End |PgDn|    |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |        |    |    |    |    |    |    |    |    |    |     | |    | up |    |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |EEPRST|    |      |         |            |      |    |     | |left|down| rt |
+ *  `-----------------------------------------------------------' `--------------'
+ */
+
+[_L2] = LAYOUT(
+RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,   KC_DEL,     KC_HOME, KC_PGUP, _______,
+_______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU,          _______,     KC_END,  KC_PGDN, _______,
+_______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,     _______,   KC_UP, _______,
+EEP_RST, _______, _______,          _______,            _______,                 _______, _______, _______,     KC_LEFT, KC_DOWN, KC_RIGHT
+)
+};
+
+void led_set_user(uint8_t usb_led) {
+  // Turn LED On/Off for Caps Lock
+  if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) {
+    the50_led_on();
+  } else {
+    the50_led_off();
+  }
+}

keyboards/m0lly/README.md

@@ -0,0 +1,17 @@
+The Key Company M0LLY
+
+[TKC M0LLY](https://cdn.shopify.com/s/files/1/1679/2319/files/Molly_Terminal_1024x1024.jpg?v=1529067702)
+
+
+The Key Company's M0LLY keyboard is inspired by the Apple Macintosh M0110A, and utilizes the AT90USB1286 microcontroller.
+
+Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)  
+Hardware Supported: TKC M0LLY  
+Hardware Availability: [TheKey.Company](https://thekey.company) 
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make m0lly:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/m0lly/config.h

@@ -0,0 +1,178 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    The Key Company
+#define PRODUCT         M0lly
+#define DESCRIPTION     QMK keyboard firmware for M0lly
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 19
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+*/
+#define MATRIX_ROW_PINS { F2, F1, F0, E1, E0 }
+/* Column pin configuration
+ */
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1, C0, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN D7
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 30     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 5
+#define RGBLIGHT_SAT_STEP 10
+#define RGBLIGHT_VAL_STEP 10
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/m0lly/i2c.c

@@ -48,7 +48,7 @@ void i2c_master_init(void) {
 // returns: 0 => success
 //          1 => error
 uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
 
   i2c_delay();
 
@@ -56,6 +56,7 @@ uint8_t i2c_master_start(uint8_t address) {
   if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
     return 1;
 
+  // send device address
   TWDR = address;
   TWCR = (1<<TWINT) | (1<<TWEN);
 
@@ -159,4 +160,7 @@ ISR(TWI_vect) {
   // Reset everything, so we are ready for the next TWI interrupt
   TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
 }
+
+
+
 #endif

keyboards/m0lly/i2c.h

@@ -16,7 +16,7 @@
 #define SLAVE_BUFFER_SIZE 0x10
 
 // i2c SCL clock frequency
-#define SCL_CLOCK  100000L
+#define SCL_CLOCK  800000L
 
 extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
 

keyboards/m0lly/info.json

@@ -0,0 +1,97 @@
+{
+    "keyboard_name": "TKC M0LLY", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 19.5, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+				{"label":"~", "x":0, "y":0},
+				{"label":"!", "x":1, "y":0},
+				{"label":"@", "x":2, "y":0},
+				{"label":"#", "x":3, "y":0},
+				{"label":"$", "x":4, "y":0},
+				{"label":"%", "x":5, "y":0},
+				{"label":"^", "x":6, "y":0},
+				{"label":"&", "x":7, "y":0},
+				{"label":"*", "x":8, "y":0},
+				{"label":"(", "x":9, "y":0},
+				{"label":")", "x":10, "y":0},
+				{"label":"_", "x":11, "y":0},
+				{"label":"+", "x":12, "y":0},
+				{"label":"Bksp", "x":13, "y":0},
+				{"x":14, "y":0},
+				{"label":"Num", "x":15.5, "y":0},
+				{"label":"/", "x":16.5, "y":0},
+				{"label":"*", "x":17.5, "y":0},
+				{"label":"-", "x":18.5, "y":0},
+				{"label":"Tab", "x":0, "y":1, "w":1.5},
+				{"label":"Q", "x":1.5, "y":1},
+				{"label":"W", "x":2.5, "y":1},
+				{"label":"E", "x":3.5, "y":1},
+				{"label":"R", "x":4.5, "y":1},
+				{"label":"T", "x":5.5, "y":1},
+				{"label":"Y", "x":6.5, "y":1},
+				{"label":"U", "x":7.5, "y":1},
+				{"label":"I", "x":8.5, "y":1},
+				{"label":"O", "x":9.5, "y":1},
+				{"label":"P", "x":10.5, "y":1},
+				{"label":"{", "x":11.5, "y":1},
+				{"label":"}", "x":12.5, "y":1},
+				{"label":"|", "x":13.5, "y":1, "w":1.5},
+				{"label":"7", "x":15.5, "y":1},
+				{"label":"8", "x":16.5, "y":1},
+				{"label":"9", "x":17.5, "y":1},
+				{"x":18.5, "y":1},
+				{"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+				{"label":"A", "x":1.75, "y":2},
+				{"label":"S", "x":2.75, "y":2},
+				{"label":"D", "x":3.75, "y":2},
+				{"label":"F", "x":4.75, "y":2},
+				{"label":"G", "x":5.75, "y":2},
+				{"label":"H", "x":6.75, "y":2},
+				{"label":"J", "x":7.75, "y":2},
+				{"label":"K", "x":8.75, "y":2},
+				{"label":"L", "x":9.75, "y":2},
+				{"label":":", "x":10.75, "y":2},
+				{"label":"\"", "x":11.75, "y":2},
+				{"label":"ISO ~", "x":12.75, "y":2},
+				{"label":"Enter", "x":13.75, "y":2, "w":1.25},
+				{"label":"4", "x":15.5, "y":2},
+				{"label":"5", "x":16.5, "y":2},
+				{"label":"6", "x":17.5, "y":2},
+				{"label":"+", "x":18.5, "y":2},
+				{"label":"Shift", "x":0, "y":3, "w":1.25},
+				{"x":1.25, "y":3},
+				{"label":"Z", "x":2.25, "y":3},
+				{"label":"X", "x":3.25, "y":3},
+				{"label":"C", "x":4.25, "y":3},
+				{"label":"V", "x":5.25, "y":3},
+				{"label":"B", "x":6.25, "y":3},
+				{"label":"N", "x":7.25, "y":3},
+				{"label":"M", "x":8.25, "y":3},
+				{"label":"<", "x":9.25, "y":3},
+				{"label":">", "x":10.25, "y":3},
+				{"label":"?", "x":11.25, "y":3},
+				{"label":"Shift", "x":12.25, "y":3, "w":1.75},
+				{"x":14, "y":3},
+				{"label":"1", "x":15.5, "y":3},
+				{"label":"2", "x":16.5, "y":3},
+				{"label":"3", "x":17.5, "y":3},
+				{"x":18.5, "y":3},
+				{"label":"Ctrl", "x":0, "y":4, "w":1.25},
+				{"label":"Win", "x":1.25, "y":4, "w":1.25},
+				{"label":"Alt", "x":2.5, "y":4, "w":1.25},
+				{"x":3.75, "y":4, "w":6.25},
+				{"label":"Alt", "x":10, "y":4, "w":1.25},
+				{"label":"Win", "x":11.25, "y":4, "w":1.25},
+				{"label":"FN", "x":12.5, "y":4, "w":1.25},
+				{"label":"Ctrl", "x":13.75, "y":4, "w":1.25},
+				{"label":"0", "x":15.5, "y":4},
+				{"x":16.5, "y":4},
+				{"label":".", "x":17.5, "y":4},
+				{"label":"Ent", "x":18.5, "y":4}]
+        }
+    }
+}

keyboards/m0lly/keymaps/default/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define USE_I2C
+#define SSD1306OLED
+//#define OLED_ROTATE180
+#define SSD1306_ADDRESS 0x3C
+
+// place overrides here

keyboards/m0lly/keymaps/default/keymap.c

@@ -0,0 +1,149 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "LUFA/Drivers/Peripheral/TWI.h"
+#include "i2c.h"
+#include "ssd1306.h"
+
+
+//Layers
+
+enum {
+  BASE = 0,
+  FUNCTION,
+};
+
+bool screenWorks = 0;
+
+//13 characters max without re-writing the "Layer: " format in iota_gfx_task_user()
+static char layer_lookup[][14] = {"Base","Function"};
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * 
+   * ,-----------------------------------------------------------. .-------------------.
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NumL| /  | *  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | | 7  | 8  | 9  |    |
+   * |-----------------------------------------------------------| |--------------| +  |
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return | | 4  | 5  | 6  |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     | | 1  | 2  | 3  | Ent|
+   * |-----------------------------------------------------------| |--------------|    |
+   * |Ctrl|Gui |Alt |      Space           | Alt | Win |FN  |Ctr | |   0     | .  |    |
+   * `-----------------------------------------------------------' '-------------------'
+   */
+  [BASE] = LAYOUT_all(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   XXXXXXX, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, XXXXXXX,          KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                        KC_RALT, KC_RWIN, MO(FUNCTION), KC_RCTL,                   KC_P0,   XXXXXXX, KC_PDOT, KC_PENT  \
+  ),
+  /* Keymap FUNCTION: (Function Layer)
+   * 
+   * ,-----------------------------------------------------------. .-------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   | RESET | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |       |   |   |   |   |   |   |   |   |   |   |   |       | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |        |Tog|Mod|Hu+|Hu-|Sa+|Sa-|Va+|Va-|Stp|   |          | |    |    |    |    |
+   * |-----------------------------------------------------------| |--------------|    |
+   * |    |    |    |                      |     |     |    |    | |         |    |    |
+   * `-----------------------------------------------------------' '-------------------'
+   */
+  [FUNCTION] = LAYOUT_all(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, XXXXXXX, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______, \
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, XXXXXXX,          _______, _______, _______, XXXXXXX, \
+    _______, _______, _______,                   _______,                        _______, _______, MO(FUNCTION), _______,                  _______, XXXXXXX, _______, _______  \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
+
+void matrix_init_user(void) {
+  #ifdef USE_I2C
+    i2c_master_init();
+    #ifdef SSD1306OLED
+      // calls code for the SSD1306 OLED
+      _delay_ms(400);
+      TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
+      if ( iota_gfx_init() ) { // turns on the display
+        screenWorks = 1;
+      }
+    #endif
+  #endif
+  #ifdef AUDIO_ENABLE
+    startup_user();
+  #endif
+}
+
+void matrix_scan_user(void) {
+  #ifdef SSD1306OLED
+    if ( screenWorks ) {
+      iota_gfx_task();  // this is what updates the display continuously
+    };
+  #endif
+}
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  #if DEBUG_TO_SCREEN
+    if (debug_enable) {
+      return;
+    }
+  #endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("TKC M0LLY"));
+
+  uint8_t layer = biton32(layer_state);
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%d", layer);
+  matrix_write_P(&matrix, PSTR("\nLayer: "));
+  matrix_write(&matrix, layer_lookup[layer]);
+
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}

keyboards/m0lly/m0lly.c

@@ -0,0 +1,69 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "m0lly.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    led_init_ports();
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
+
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
+
+    return process_record_user(keycode, record);
+}
+
+void led_init_ports(void) {
+	DDRD |= (1<<2) | (1<<3) | (1<<4); // OUT
+	DDRB |= (1<<7); // OUT
+	PORTB |= (1<<7);
+}
+
+void led_set_kb(uint8_t usb_led) {
+//    led_set_user(usb_led);
+	if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        // Turn numlock on
+		PORTD |= (1<<2);
+    } else {
+        // Turn numlock off
+	    PORTD &= ~(1<<2);
+    }
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+		PORTD |= (1<<3);
+    } else {
+        // Turn capslock off
+		PORTD &= ~(1<<3);
+    }
+	if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+        // Turn scrolllock on
+	    PORTD |= (1<<4);
+    } else {
+        // Turn scrolllock off
+		PORTD &= ~(1<<4);
+    }
+}

keyboards/m0lly/m0lly.h

@@ -0,0 +1,32 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, K1G, K1H, K1I, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2F, K2G, K2H, K2I, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,    K3D,   K3F, K3G, K3H, K3I, \
+    K40, K41, K42,           K45,                        K49, K4B, K4C, K4D,   K4F, K4G, K4H, K4I  \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   K0G, K0H, K0I }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO, K1F,   K1G, K1H, K1I }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO, K2F,   K2G, K2H, K2I }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   KC_NO, K3F,   K3G, K3H, K3I }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, K45,   KC_NO, KC_NO, KC_NO, K49,   KC_NO,   K4B,   K4C,   K4D,   KC_NO,   K4F, K4G, K4H, K4I }  \
+}

keyboards/m0lly/rules.mk

@@ -0,0 +1,72 @@
+
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+
+SRC = i2c.c \
+	  ssd1306.c

keyboards/namecard2x4/rev2/config.h

@@ -0,0 +1,216 @@
+/*
+Copyright 2018 takashiski
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    takashiski
+#define PRODUCT         namecard2x4
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B2,B6 }
+#define MATRIX_COL_PINS { D7,E6,B4,B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+//#define DIODE_DIRECTION COL2ROW
+#define DIODE_DIRECTION ROW2COL
+#define RGB_DI_PIN D4
+#define RGBLED_NUM 8
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 10
+#define RGBLIGHT_VAL_STEP 10
+
+//#define BACKLIGHT_PIN F4 
+//#define BACKLIGHT_BREATHING
+//#define BACKLIGHT_LEVELS 1
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/

keyboards/namecard2x4/rev2/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+#UNICODEMAP_ENABLE = yes # for emoji user
+#RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips

keyboards/planck/keymaps/emiller/config.h

@@ -0,0 +1,39 @@
+#pragma once
+
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+                                
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+

keyboards/planck/keymaps/emiller/keymap.c

@@ -0,0 +1,307 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST,
+  _VIM,
+  _NUM
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV,
+  VIM,
+  NUM
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Alt  | VIM  | Lower|    Space    |Raise | NUM  | Vol- | Vol+ | Del  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_planck_grid (
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+  KC_LCTL, KC_LGUI, KC_LALT, MO(_VIM), LOWER,   KC_SPC,  KC_SPC,  RAISE,  TT(NUM), KC_VOLD, KC_VOLU,  KC_RSFT
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_planck_grid(
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_planck_grid(
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT ,
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      | Prev |      |             |      | Next | BL-  | BL+  |Print |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_planck_grid(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+  _______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+  _______, _______, _______, KC_MPRV, _______, _______, _______, _______, KC_MNXT, BL_DEC, BL_INC, KC_PSCREEN
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_planck_grid(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  _______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+  _______, _______, _______, KC_MPRV, _______, _______, _______, _______, KC_MNXT, BL_DEC, BL_INC, KC_MPLY
+),
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = LAYOUT_planck_grid(
+  KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   ,
+  XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
+  XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_planck_grid(
+  _______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL ,
+  _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______,
+  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+/* VIM
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      | Copy | Undo |      | Paste|      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      | Cut  |      |      |      | Left | Down |  Up  | Right |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      | Del  |      |Select|      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_VIM] = LAYOUT_planck_grid(
+  _______, _______, _______, _______, _______, _______, _______, KC_COPY, KC_UNDO, _______, KC_PASTE, _______,
+  _______, _______, _______, KC_CUT, _______, _______,  KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______,
+  _______, _______,  KC_DEL, _______, KC_SELECT, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+/* NUM
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |   7  |   8  |   9  |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |   4  |   5  |   6  |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |   1  |   2  |   3  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |   0  |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_NUM] = LAYOUT_planck_grid(
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_0, _______, _______
+),
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(plover_song);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+    case NUM:
+      if (record->event.pressed) {
+        layer_on(_NUM);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_NUM);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+      }
+  return true;
+}

keyboards/planck/keymaps/emiller/readme.md

@@ -0,0 +1,2 @@
+# The Default Planck Layout
+

keyboards/planck/keymaps/emiller/rules.mk

@@ -0,0 +1 @@
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/preonic/keymaps/default/keymap.c

@@ -233,7 +233,7 @@ uint16_t muse_counter = 0;
 uint8_t muse_offset = 70;
 uint16_t muse_tempo = 50;
 
-void encoder_update(bool clockwise) {
+void encoder_update_user(uint8_t index, bool clockwise) {
   if (muse_mode) {
     if (IS_LAYER_ON(_RAISE)) {
       if (clockwise) {